{"title":"Allstar Performance","description":"\u003cp\u003eBrowse 23 Allstar Performance products at RedLeaf Auto, including brake parts, greases \u0026amp; lubricants and fuel \u0026amp; oil additives. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"allstar-performance-stainless-steel-braided-brake-hose-kit-for-gm-metric-vehicles-2-16-10mm-7-16-20-banjo-lines-dot-approved","title":"Allstar Performance Stainless Steel Braided Brake Hose Kit for GM Metric Vehicles — 2×16\" 10mm (7\/16-20) Banjo Lines, DOT-Approved","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance ALL42032 is a DOT-approved stainless steel braided brake hose kit engineered to replace OE rubber lines on GM metric brake vehicles using 7\/16-20 (10mm) fittings, delivering improved durability and consistent pedal feel.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete brake hose assembly is built for technicians and vehicle owners who want a direct-fit stainless braided upgrade for GM metric brake systems. The kit ships with two 16\" stainless steel braided hoses pre-fitted with banjo ends, the correct banjo bolts and crush washers, plus frame adapters, tabs and retaining clips for a straightforward installation. Because it’s DOT-approved, the lines meet safety standards for on-road use while offering enhanced resistance to abrasion, heat and swelling versus standard rubber hoses.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit my GM metric brake vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe ALL42032 is designed to fit GM metric applications that use 7\/16-20 (10mm) fittings and similar metric-threaded calipers or wheel cylinders. Measure your existing hose threads and mounting points to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes two 16\" braided lines with banjo fittings already attached for direct replacement.\u003c\/li\u003e\n  \u003cli\u003eCompatible with GM vehicles that use 10mm (7\/16-20) metric brake fittings.\u003c\/li\u003e\n  \u003cli\u003eFrame adapters and tabs are included to match common mounting locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does stainless braided hose improve brake performance?\u003c\/h3\u003e\n\u003cp\u003eStainless braided hoses resist expansion under pressure better than stock rubber lines, which can reduce pedal mush and preserve firmer brake feel during repeated stops. They also resist abrasion and heat, improving long-term reliability in demanding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMinimal expansion under pressure keeps hydraulic force consistent at the caliper.\u003c\/li\u003e\n  \u003cli\u003eStainless braid protects inner hose from chafing and external damage.\u003c\/li\u003e\n  \u003cli\u003eDOT approval ensures the hoses meet required safety standards for road use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the ALL42032 kit and what tools are needed to install it?\u003c\/h3\u003e\n\u003cp\u003eThe kit is supplied complete with the braided hoses and all hardware needed to mount them in place, making it a convenient one-kit replacement. Basic hand tools and a torque wrench are typically all that’s required for a proper, leak-free installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 16\" stainless braided hoses with banjo fittings already installed.\u003c\/li\u003e\n  \u003cli\u003eBanjo bolts, crush washers, frame adapter fittings, frame tabs and retaining clips included.\u003c\/li\u003e\n  \u003cli\u003eSuggested tools: line wrench, torque wrench, brake fluid, bleed kit and safety gear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these hoses road-legal and safe to use?\u003c\/h3\u003e\n\u003cp\u003eYes—these hoses are DOT-approved for on-road use when installed correctly. They should be installed by a qualified technician or by someone comfortable with brake line routing and hydraulic system bleeding to ensure safety and proper operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDOT approval indicates compliance with applicable safety requirements.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle manufacturer torque specs for banjo bolts and fittings.\u003c\/li\u003e\n  \u003cli\u003eAlways bleed the brake system thoroughly after installation to remove air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Allstar Performance ALL42032 kit is aimed at DIY mechanics, restoration shops and performance-minded drivers who drive GM metric-brake vehicles and want a rugged, OEM-style replacement with improved durability and firmer pedal feel. It’s ideal for street-driven classics, daily drivers upgraded for towing or hauling, and mild performance builds where reliability and consistent braking response matter. If you’re uncertain about fitment, compare your current hose thread (7\/16-20 \/ 10mm) and mounting arrangement to the kit hardware, or consult a professional installer to confirm compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the ALL42032 include banjo bolts and washers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit includes banjo bolts and crush washers along with frame adapters, tabs and retaining clips.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these hoses DOT-approved for street use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Allstar ALL42032 hoses are DOT-approved when installed and bled correctly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67586539421881,"sku":"B006K8K1LE","price":119.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-brake-hose-kit-front_jpg.jpg?v=1790486389"},{"product_id":"allstar-performance-4l80e-locking-transmission-dipstick-silver-solid-steel-cadmium-plated","title":"Allstar Performance 4L80E Locking Transmission Dipstick, Silver — Solid Steel Cadmium‑Plated","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance ALL69118 is a locking, solid‑tube transmission dipstick engineered to give a secure, repeatable fluid check for Chevy\/GMC 4L80E transmissions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy‑duty dipstick replaces flimsy factory units with a steel cadmium‑plated solid tube and a positive locking mechanism that keeps the tube sealed and held in place during spirited driving, trail use, or towing. Designed as a vehicle‑specific fit for 4L80E applications on Chevy and GMC vehicles, this dipstick offers a straightforward way to measure and maintain transmission fluid without the play or rattling common to stock dipsticks.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the locking feature improve fluid checks?\u003c\/h3\u003e\n\u003cp\u003eThe positive lock holds the dipstick tube securely at the mounting tab so the dipstick won’t back out or rattle loose under vibration. This delivers more consistent fluid level readings and prevents accidental fluid seepage or contamination when the vehicle is in use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePositive locking mechanism prevents tube movement and rattles\u003c\/li\u003e\n  \u003cli\u003eTighter seal reduces the risk of dirt or moisture entering the transmission\u003c\/li\u003e\n  \u003cli\u003eStable placement yields repeatable dipstick readings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction ensure durability?\u003c\/h3\u003e\n\u003cp\u003eThe tube is fabricated from solid steel and finished with a cadmium plating that helps resist corrosion from road salts and fluid exposure. The robust construction stands up to heat cycles and chassis flex better than thinner, stamped OEM tubes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid steel tube for structural strength\u003c\/li\u003e\n  \u003cli\u003eCadmium plating for corrosion resistance and longevity\u003c\/li\u003e\n  \u003cli\u003eWelded mounting tab sized for bellhousing attachment points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my vehicle and how do I install it?\u003c\/h3\u003e\n\u003cp\u003eThis dipstick is purpose‑built to work with 4L80E transmissions found in many Chevy and GMC applications. It is a universal‑styled aftermarket piece that measures 8-1\/2\" tall from the bellhousing mounting tab to the top of the tube, so confirm clearance and mounting orientation before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle‑specific for 4L80E but not an OE pickup direct swap\u003c\/li\u003e\n  \u003cli\u003eMeasures 8.5\" from bellhousing tab to tube top — verify fitment\u003c\/li\u003e\n  \u003cli\u003eSimple bolt‑on installation at the bellhousing mounting tab\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical benefits during driving and maintenance?\u003c\/h3\u003e\n\u003cp\u003eWith this dipstick installed you’ll notice less noise from the transmission area and fewer surprises from a lost or loose dipstick tube. It makes routine checks faster and gives technicians a sturdy access point for accurate fluid level verification during service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces transmission area noise and eliminates dipstick rattling\u003c\/li\u003e\n  \u003cli\u003eMakes service checks quicker and more reliable\u003c\/li\u003e\n  \u003cli\u003eHelps avoid transmission contamination from loose tubes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Allstar Performance ALL69118 locking dipstick is aimed at owners, mechanics, and builders who run Chevy\/GMC vehicles with the 4L80E transmission and want a tougher, more secure replacement than many stock dipsticks. Choose this if you need a solid steel, cadmium‑plated tube with a positive lock for better durability, cleaner fluid checks, and reduced underbody noise. Note: this is an aftermarket universal design intended for specific 4L80E applications and is not an OE pickup direct replacement; confirm measurements and mounting compatibility before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this dipstick a direct OE replacement for pickups?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It is a universal aftermarket design for 4L80E setups and not an OE pickup direct swap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How tall is the dipstick from the bellhousing tab to the top?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tube measures 8-1\/2 inches from the bellhousing mounting tab to the top of the tube.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67586542928057,"sku":"B009Q7A3RI","price":157.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-locking-dipstick-front-profile.jpg?v=1790486503"},{"product_id":"allstar-performance-lower-radiator-hose-1-3-4-x-16-1-2-two-ply-abrasion-resistant-heat-tolerant","title":"Allstar Performance lower radiator hose 1-3\/4\" x 16-1\/2\" — two-ply abrasion-resistant, heat-tolerant","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance ALL30224 is a two-ply, abrasion-resistant lower radiator hose sized 1-3\/4\" x 16-1\/2\" built to flexibly route coolant while resisting cracking and hardening.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement lower radiator hose is designed for reliable coolant transfer in a range of vehicle applications. Constructed with two plies for strength and an abrasion-resistant outer cover, it balances flexibility with durability so it bends around tight engine bay paths without becoming brittle over time. The hose ships in compact packaging and is vehicle-specific fitment; confirm compatibility with your vehicle before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWhat materials and construction keep this hose flexible yet durable?\u003c\/h3\u003e\n\u003cp\u003eThe ALL30224 uses a two-ply construction that combines an inner coolant-compatible layer with a reinforced outer ply to resist abrasion and maintain shape under pressure. This layered design reduces the chance of collapse while still allowing the hose to contour around engine components. The external cover is formulated to remain pliable and avoid cracking or hardening from heat cycles and environmental exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-ply build for strength plus flexibility\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant outer cover to prevent wear from contact\u003c\/li\u003e\n  \u003cli\u003eHeat-tolerant compound engineered to stay pliable over time\u003c\/li\u003e\n  \u003cli\u003eSized 1-3\/4\" inner diameter by 16-1\/2\" length for accurate routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know this hose fits my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe product is vehicle-specific and fits multiple makes and models; fitment should be verified before installation. Use your vehicle’s year, make, model and engine size to cross-check the ALL30224 against the manufacturer’s fitment guide or consult a parts specialist. Keeping the original hose on hand during comparison helps confirm length, diameter, and bend geometry match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck year\/make\/model and engine specification for compatibility\u003c\/li\u003e\n  \u003cli\u003eCompare existing hose measurements and bend profiles\u003c\/li\u003e\n  \u003cli\u003eContact Allstar Performance or your parts supplier for fitment verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect after installation?\u003c\/h3\u003e\n\u003cp\u003eOnce installed, this lower radiator hose provides consistent coolant flow and resists common failure modes like abrasion and brittle cracking. Its flexible profile helps avoid stress at clamps and connections, while the reinforced construction supports pressure cycles without collapsing. Regular checks for leaks, soft spots or swelling will extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintains coolant circulation under normal operating conditions\u003c\/li\u003e\n  \u003cli\u003eResists abrasion where it rubs against engine components\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand repeated heat and pressure cycles\u003c\/li\u003e\n  \u003cli\u003eHelps prevent clamp-area failures with flexible routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to replace the lower radiator hose myself?\u003c\/h3\u003e\n\u003cp\u003eReplacing a lower radiator hose is a straightforward maintenance task for most DIYers with basic tools and safety precautions. Drain the coolant to a safe level, remove hose clamps, and swap the old hose for the ALL30224, ensuring a snug clamp fit and proper orientation. Refill coolant and check for leaks during a short test drive or warm-up cycle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires basic hand tools and coolant-safe drain pan\u003c\/li\u003e\n  \u003cli\u003eConfirm hose orientation before tightening clamps\u003c\/li\u003e\n  \u003cli\u003eRefill and bleed cooling system per vehicle instructions\u003c\/li\u003e\n  \u003cli\u003eInspect clamps and connection surfaces for corrosion or damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Allstar Performance ALL30224 lower radiator hose is aimed at vehicle owners, mechanics and restoration enthusiasts who need a dependable, flexible replacement hose that resists abrasion and long-term hardening. It fits applications where a 1-3\/4\" ID and 16-1\/2\" length are required, and it’s a sensible choice for routine cooling-system maintenance, weekend repairs, or when upgrading worn original equipment hoses. Always verify fitment for your specific vehicle and follow standard coolant safety and disposal practices when replacing hoses.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the hose dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The ALL30224 measures 1-3\/4\" inner diameter and 16-1\/2\" overall length.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose resistant to cracking?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it has an abrasion-resistant cover and a formulation designed to resist cracking and hardening.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67587276964025,"sku":"B003BZZ2MC","price":91.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-all30224-front-packaging.jpg?v=1790503823"},{"product_id":"allstar-performance-brake-bleeder-bottle-16-oz-white-with-magnet-one-way-valve-12-hose","title":"Allstar Performance brake bleeder bottle 16 oz — white with magnet \u0026 one-way valve, 12\" hose","description":"\u003cp\u003e\u003cstrong\u003eThe Allstar Performance ALL11017 is a 16 oz white brake bleeder bottle with an integrated magnet and one-way check valve that lets one person bleed brakes with cleaner, safer fluid collection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you routinely service hydraulic brakes or clutch systems, a compact, reliable bleed bottle makes the job neater and faster. The ALL11017 combines a translucent 16-ounce reservoir, a built-in magnetic retainer for secure mounting, a one-way check valve to reduce air backflow, and a 12-inch flexible hose that slips over most bleeder nipples. Its universal fit and simple components are designed to streamline single-operator bleeding while keeping used fluid contained.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this bleeder bottle make one-person bleeding easier?\u003c\/h3\u003e\n\n\u003cp\u003eThe built-in check valve prevents air from re-entering the system when you release the brake pedal, so you can operate the brake while watching fluid flow into the bottle. The magnet helps anchor the bottle to a nearby steel surface, freeing your hands and reducing spills. Together they simplify the cycle of pump, open, close, and inspect.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOne-way check valve reduces backflow and trapped air.\u003c\/li\u003e\n  \u003cli\u003eMagnet retainer secures bottle to vehicle or workbench.\u003c\/li\u003e\n  \u003cli\u003e12\" flexible tubing fits most bleeder nipples for reliable seals.\u003c\/li\u003e\n  \u003cli\u003eTransparent reservoir lets you monitor fluid level and color.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and size should I expect for durability and capacity?\u003c\/h3\u003e\n\n\u003cp\u003eThe ALL11017 is molded from durable white plastic that resists common workshop chemicals and rough handling. With a 16-ounce internal capacity it captures enough fluid for most single-axle brake bleeding jobs without being bulky. The flexible hose is designed to stay pliable in shop conditions yet strong enough to maintain a snug fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e16-ounce fluid capacity suitable for most brake bleed tasks.\u003c\/li\u003e\n  \u003cli\u003eDurable plastic bottle resists typical automotive fluids.\u003c\/li\u003e\n  \u003cli\u003e12\" tubing balances reach and control around suspension components.\u003c\/li\u003e\n  \u003cli\u003eCompact footprint keeps the bottle handy without obstructing work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the magnetic mount and tubing arrangement improve workshop workflow?\u003c\/h3\u003e\n\n\u003cp\u003eThe magnet attaches the bottle to any ferrous surface near the bleeder valve, so you can position the reservoir at the right height and orientation without clamps or extra hands. The tubing length and flexibility let you route the line around obstacles and hold a tight seal on the bleeder valve, cutting down on mess and speeding repeat cycles.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMagnet allows hands-free placement near the work area.\u003c\/li\u003e\n  \u003cli\u003eFlexible 12\" hose provides reach in cramped brake assemblies.\u003c\/li\u003e\n  \u003cli\u003eSecure tubing fit minimizes fluid leakage.\u003c\/li\u003e\n  \u003cli\u003eTranslucent sides make fluid condition visible as you bleed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and maintenance tips should I follow with this bleeder bottle?\u003c\/h3\u003e\n\n\u003cp\u003eUse the bottle only with compatible hydraulic fluids and avoid prolonged exposure to strong solvents that may degrade the plastic. Dispose of captured fluid according to local regulations and rinse the bottle thoroughly between different fluid types to prevent contamination. Keep the check valve clean and inspect the tubing for cracks before each use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOnly use compatible brake or clutch fluids to protect the plastic.\u003c\/li\u003e\n  \u003cli\u003eEmpty and properly dispose of used fluid after each job.\u003c\/li\u003e\n  \u003cli\u003eInspect and replace tubing or valve if damaged or clogged.\u003c\/li\u003e\n  \u003cli\u003eStore clean and dry to prolong service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Allstar Performance ALL11017 is intended for DIY mechanics, home garage enthusiasts, and professional technicians who need a compact, reliable tool for one-person brake or clutch bleeding. If you value quicker single-operator procedures, reduced mess, and a small, durable reservoir with magnetic mounting, this kit is a practical addition to your tool kit. It’s also well suited for mobile mechanics and anyone working in tight engine bays or near suspension components where a hands-free bleed setup speeds the job.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one person bleed brakes using this bottle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The integrated one-way check valve and magnetic mount let a single operator pump and open the bleeder while preventing air from re-entering the system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the 12\" tubing fit my vehicle's bleeder valve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: In most cases yes—the flexible 12-inch hose fits over common bleeder nipples, but confirm fit on very small or uncommon valve shapes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67587284402361,"sku":"B00F9XHVKA","price":90.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-bleeder-bottle-front-view.jpg?v=1790504235"},{"product_id":"allstar-performance-racing-window-net-18-x-24-black-sfi-27-1-tagged-rectangular-border-mount","title":"Allstar Performance racing window net 18\" x 24\" Black SFI 27.1 tagged rectangular border-mount","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance ALL10285 is a black, rectangle border-style mount ribbon window net sized 18\" high by 24\" wide that meets SFI 27.1 standards for racecar use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis window net is built for drivers and builders who need a durable, regulation-compliant containment solution for full-bodied race cars. Constructed from heavy-duty polypropylene webbing with double-stitched seams using robust nylon thread, the net combines long-lasting materials with a border-style mount that simplifies installation and inspection. Tagged to SFI 27.1 specifications, it’s one of Allstar’s color and size options tailored for oval and road racing applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this window net comply with racing safety standards?\u003c\/h3\u003e\n\u003cp\u003eThe ALL10285 carries an SFI 27.1 tag indicating it meets the abrasion and retention requirements commonly requested by race sanctioning bodies. The stitched border and reinforced webbing help maintain integrity under load, and the product is sold as an inspected, tagged net ready for mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSFI 27.1 tagged for inspection visibility\u003c\/li\u003e\n  \u003cli\u003eDurable polypropylene webbing resists wear from repeated use\u003c\/li\u003e\n  \u003cli\u003eDouble-stitched seams with heavy nylon thread for added strength\u003c\/li\u003e\n  \u003cli\u003eBorder-style mounting streamlines fitment to roll cages or mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and fitment details?\u003c\/h3\u003e\n\u003cp\u003eThis model is a rectangular net measuring 18 inches in height and 24 inches in width — larger than Allstar’s square nets — and designed to fit rectangular window openings on many full-bodied racecars. The border-style mount provides a finished edge that eases attachment and helps maintain a consistent opening shape.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExterior dimensions: 18\" high × 24\" wide\u003c\/li\u003e\n  \u003cli\u003eBorder-style mounting for secure edge attachment\u003c\/li\u003e\n  \u003cli\u003eBlack color for reduced glare and a subtle track appearance\u003c\/li\u003e\n  \u003cli\u003eSold individually to match one-side replacement or custom installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the construction and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eThe net uses quality polypropylene webbing, chosen for its strength-to-weight ratio and resistance to fraying. All primary webbing intersections and the border are reinforced with heavy-duty nylon thread and double-stitching to resist tearing and to hold up under the demands of competition environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePolypropylene webbing for long-term abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eHeavy nylon thread with double-stitch seams for increased load tolerance\u003c\/li\u003e\n  \u003cli\u003eBorder-style mount provides additional reinforcement at the attachment points\u003c\/li\u003e\n  \u003cli\u003eBlack finish helps hide dirt and wear between inspections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis net is part of Allstar’s range of rectangular and square options — available in other colors and sizes — giving teams flexibility when matching interior styling and race requirements.\u003c\/p\u003e\n\n\u003cp\u003eWho is this for?\u003c\/p\u003e\n\u003cp\u003eThe Allstar Performance ALL10285 is intended for racers, fabricators, and race-team mechanics who need a replacement or upgrade window net that meets SFI 27.1 checks. It’s best for full-bodied stock-car and touring-style racecars where a rectangular net is required or preferred, and for anyone who values straightforward installation, strong construction, and a regulation-ready, black appearance. If you need different color or size options, Allstar also offers rectangular and square nets in blue and red and additional square sizes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the ALL10285 SFI certified?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the ALL10285 is tagged to meet SFI 27.1 specifications and is ready for inspection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size window does this net fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This rectangular border net measures 18 inches high by 24 inches wide for larger window openings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67589306908857,"sku":"B006K8GCCG","price":77.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-all10285-front-view-black-window-net.jpg?v=1790529744"},{"product_id":"allstar-performance-braided-clutch-line-kit-48in-chrome-grey-preassembled-3an-to-90-hard-line","title":"Allstar Performance braided clutch line kit 48in — chrome \u0026 grey, preassembled -3AN to 90° hard-line","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance 46100 is a pre-assembled braided clutch line kit that links a clutch master cylinder to a hydraulic throw-out bearing or to transmissions with internal clutches, featuring one straight -3AN end, one 90° 3\/16\" inverted-flare hard-line end, and an adapter fitting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit delivers a ready-to-install, corrosion-resistant hose solution for converting or repairing hydraulic clutch plumbing. Built with braided steel reinforcement and chrome\/grey finishes, the assembly simplifies routing in confined engine bays and reduces the need for custom hose fabrication. It includes a 1\/8\" male to -3AN adapter (ALL50000) so you can tie into common master cylinders or aftermarket fittings without searching for extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clutch line kit connect to my clutch system?\u003c\/h3\u003e\n\u003cp\u003eThe kit is made to bridge the clutch master cylinder and a hydraulic throw-out bearing or internal clutch transmission. One end uses a straight -3AN fitting while the other terminates in a 3\/16\" inverted-flare 90° hard-line end to fit existing hardline ports or bulkhead locations. The included ALL50000 adapter lets you attach to 1\/8\" male threads if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled #3 braided steel hose for direct connection\u003c\/li\u003e\n  \u003cli\u003e-3AN straight end for aftermarket or AN-thread master cylinders\u003c\/li\u003e\n  \u003cli\u003e3\/16\" inverted-flare 90° hard-line end for factory-fitting compatibility\u003c\/li\u003e\n  \u003cli\u003eIncluded 1\/8\" male to -3AN adapter for flexible hookups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material and finish details I should expect?\u003c\/h3\u003e\n\u003cp\u003eThis line uses braided steel reinforcement over a hydraulic-rated inner hose for strength and pressure handling. Fittings are finished in chrome with grey braided hose to resist corrosion and provide a clean under-hood appearance. The components are assembled and tested in the United States, ensuring consistent build quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBraided steel exterior for abrasion and pressure resistance\u003c\/li\u003e\n  \u003cli\u003eChrome fittings for corrosion protection and visual appeal\u003c\/li\u003e\n  \u003cli\u003ePre-assembled to factory-style torque and sealing standards\u003c\/li\u003e\n  \u003cli\u003eLightweight construction — kit weight approximately 0.276 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my vehicle and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eFit depends on your clutch master cylinder thread type and the routing space around your transmission. If your system accepts a -3AN or a 3\/16\" inverted-flare 90° hard-line, this kit will usually adapt with minimal modifications. Installation typically requires basic hand tools, line wrenches, and proper sealing\/Teflon where recommended; bleeding the clutch is needed after install.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck master cylinder outlet threads: -3AN or 1\/8\" with supplied adapter\u003c\/li\u003e\n  \u003cli\u003e90° hard-line end aids routing in tight transmission tunnels\u003c\/li\u003e\n  \u003cli\u003eBasic tools and a clutch-bleeding procedure required\u003c\/li\u003e\n  \u003cli\u003eCompatible with hydraulic throw-out bearings and internal-clutch transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Allstar Performance 46100 clutch line kit is aimed at builders, restorers, and racers who need a reliable, ready-made hydraulic clutch hose that reduces fabrication time. It suits enthusiasts fitting aftermarket master cylinders, replacing worn hard lines, or connecting hydraulic throw-out bearings in compact engine bays. If you prefer a finished, corrosion-resistant hose assembly that includes an adapter for flexible hookup options, this kit streamlines installation and neatens the clutch plumbing on custom and performance projects.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include any adapter fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the assembly includes a 1\/8\" male to -3AN adapter (ALL50000) for flexible connections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I bend or modify the hard-line 90° end?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the 90° hard-line end is fixed; use proper routing or replace the mating hard line if a different angle is required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67590708560057,"sku":"B009Q750LC","price":79.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-clutch-line-front-view.jpg?v=1790536249"},{"product_id":"allstar-performance-3an-ptfe-lined-braided-stainless-hose-assembly-48-in-female-female-durable","title":"Allstar Performance 3AN PTFE-Lined Braided Stainless Hose Assembly, 48 in Female-Female, Durable","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance 48-inch 3AN braided stainless hose assembly with PTFE lining and 3AN straight female fittings provides a durable, flexible fluid connection for automotive systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ready-made hose joins two 3AN straight female fittings over a 48-inch length of PTFE-lined, stainless-braided hose. Built for vehicle-specific installations and packaged in compact dimensions, the assembly simplifies plumbing tasks where a corrosion-resistant, smooth-bore hose is required. It ships from the United States and is designed as an automotive part to fit performance and maintenance applications.\u003c\/p\u003e\n\n\u003ch3\u003eWhat materials make up this hose and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe hose combines an internal PTFE (polytetrafluoroethylene) liner with an external stainless-steel braid and aluminum 3AN fittings. PTFE gives a low-friction, chemically resistant interior while the braid adds abrasion resistance and pressure containment without sacrificing flexibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePTFE liner: smooth bore for consistent flow and chemical compatibility\u003c\/li\u003e\n  \u003cli\u003eStainless braid: resists abrasion and external wear\u003c\/li\u003e\n  \u003cli\u003e3AN straight female fittings: standard performance sizing for many fluid systems\u003c\/li\u003e\n  \u003cli\u003e48-inch length: ready to install without cutting or splicing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 3AN straight female to 3AN straight female configuration help during installation?\u003c\/h3\u003e\n\u003cp\u003eHaving 3AN straight female fittings on both ends lets you connect two male AN threaded components directly, reducing the need for adapters or extra fittings. The straight orientation is ideal where hose runs are mostly linear and you want minimal bulk at the connection points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStraight fittings minimize profile at both ends for tight routing\u003c\/li\u003e\n  \u003cli\u003eFemale-to-female ends match male AN ports or can accept adapters\u003c\/li\u003e\n  \u003cli\u003ePreassembled: saves time versus assembling hose and fittings separately\u003c\/li\u003e\n  \u003cli\u003e48\" length avoids the need for joins in many installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicle tasks or systems is this hose assembly suited for?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is intended for a variety of automotive fluid applications where a 3AN size is appropriate, such as fuel, oil, coolant return lines, or other low-to-medium pressure plumbing circuits depending on system requirements. Always verify compatibility with your vehicle and fluid type before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon uses: fuel lines, oil feed\/return, and accessory plumbing\u003c\/li\u003e\n  \u003cli\u003eFit type: vehicle specific—confirm fitment for your model\u003c\/li\u003e\n  \u003cli\u003eDurable construction for workshop and performance environments\u003c\/li\u003e\n  \u003cli\u003eSold each: one preassembled 48\" hose per unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePackage details: compact packaging measuring approximately 20.573 cm L x 14.478 cm W x 1.27 cm H, shipped from the United States as an automotive part ready for installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e This hose assembly is aimed at mechanics, fabricators, racers, and DIY enthusiasts who need a reliable, preassembled 3AN connection for vehicle fluid routing. If you prefer to avoid assembling hose and fittings or require a 48-inch PTFE-lined, stainless-braided solution with straight female 3AN ends, this unit is a practical option. Verify vehicle fitment and fluid compatibility before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with fuel and oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The PTFE liner is chemically resistant and commonly used for fuel and oil; confirm compatibility with your fluid and system pressure before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I shorten the 48\" hose if needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Shortening is possible but requires cutting and re-terminating with proper AN fittings and tools; preassembled units are sold as-is for convenience.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67591269187769,"sku":"B009Q75BN4","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-3an-hose-front-package.jpg?v=1790545731"},{"product_id":"allstar-performance-lever-type-brake-light-switch-all76250-spring-return-with-zinc-oxide-finish-and-two-wire-hookup","title":"Allstar Performance lever-type brake light switch ALL76250 — spring-return with zinc-oxide finish and two-wire hookup","description":"\u003cp\u003e\u003cstrong\u003eThe Allstar Performance ALL76250 is a spring-loaded lever brake light switch built from zinc-oxide-coated steel for reliable, under-floor brake pedal actuation and easy two-wire hookup.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, vehicle-specific lever-type switch is intended for use with under-floor brake pedal assemblies where the switch makes contact with the brake pedal arm. Its spring-return design opens the circuit when the pedal is released and closes when the pedal arm depresses the lever, powering brake lights or a brake light relay. The switch’s zinc-oxide finish improves corrosion resistance and the built-in tapped mounting holes simplify installation in many custom and replacement applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this switch operate with an under-floor brake pedal?\u003c\/h3\u003e\n\u003cp\u003eThe ALL76250 uses a simple lever that the pedal arm contacts when the brake is depressed. The spring-loaded mechanism ensures the switch returns to its open position when the pedal is released, preventing false brake-light signals. It’s designed to be mounted where the lever can make consistent contact with the pedal arm movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpring-return lever closes circuit when pedal engages\u003c\/li\u003e\n  \u003cli\u003eTwo #10-32 tapped mounting holes, 5\/8\" on centers for secure attachment\u003c\/li\u003e\n  \u003cli\u003eSteel body with zinc-oxide finish for rust resistance\u003c\/li\u003e\n  \u003cli\u003eCompact size fits many under-floor pedal setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wiring and electrical connection does it need?\u003c\/h3\u003e\n\u003cp\u003eWiring is straightforward: the switch accepts two-wire connections—one is the positive supply and the other sends power to the brake lights or a relay. No separate ground connection is required beyond the vehicle chassis when wired conventionally, keeping installation simple for most automotive electrical systems. Use rated wire and connectors for a safe, durable connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for two-wire hookup: + supply and brake light\/relay output\u003c\/li\u003e\n  \u003cli\u003eSolderless connectors or crimp terminals compatible with #10-32 terminals\u003c\/li\u003e\n  \u003cli\u003eWorks with standard automotive 12V circuits and relays\u003c\/li\u003e\n  \u003cli\u003eSuitable for direct wiring or via a brake-light relay for higher-current setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it physically fit my vehicle’s pedal assembly?\u003c\/h3\u003e\n\u003cp\u003eThis switch is described as a fit for vehicle-specific under-floor brake pedal applications where a lever-style contact is possible. Check the mounting hole spacing and the lever clearance against your pedal arm travel to ensure compatibility. The two mounting holes are spaced 5\/8\" (0.625\") on center and accept #10-32 fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting hole spacing: 5\/8\" on centers, two #10-32 tapped holes\u003c\/li\u003e\n  \u003cli\u003eCompact package dimensions: approximately 7\" L x 4\" W x 1.4\" H with hardware packaging\n\u003c\/li\u003e\n  \u003cli\u003eSteel construction with zinc-oxide finish for durability in under-floor locations\u003c\/li\u003e\n  \u003cli\u003eSuitable where pedal arm can physically contact a lever-type switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable is the ALL76250 switch?\u003c\/h3\u003e\n\u003cp\u003eConstructed from steel with a zinc-oxide coating, the switch is built to resist corrosion typical of under-floor environments. The mechanical lever and spring assembly are straightforward parts that are easy to inspect or replace if needed. Because installation uses standard fasteners and wiring, servicing or swapping the switch is quick for most mechanics or DIYers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eZinc-oxide finish helps protect against rust and moisture\n\u003c\/li\u003e\n  \u003cli\u003eSimple mechanical design for easy inspection and replacement\n\u003c\/li\u003e\n  \u003cli\u003eStandard #10-32 mounting and two-wire electrical layout for straightforward service\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Allstar Performance ALL76250 is aimed at automotive technicians, hot-rod builders, race-car fabricators, and DIY enthusiasts who need a reliable, lever-type brake light switch for under-floor pedal assemblies. It suits projects that require a compact, spring-return switch with easy two-wire connections and corrosion-resistant construction. Verify pedal-arm clearance and mounting hole spacing before ordering to ensure proper fit for your specific vehicle application.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wires connect to the ALL76250 switch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Connect one wire to the positive supply and the other to the brake lights or a brake-light relay; no separate ground is required when using the chassis ground.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the mounting hole specs for this switch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It has two #10-32 tapped mounting holes spaced 5\/8\" (0.625\") on center for secure under-floor attachment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67591589167289,"sku":"B003C01FFY","price":67.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-lever-switch-front-view.jpg?v=1790555785"},{"product_id":"allstar-performance-14-x-3-paper-air-filter-element-all26020-pleated-paper-drop-in-replacement","title":"Allstar Performance 14\" x 3\" Paper Air Filter Element ALL26020 - Pleated Paper, Drop-In Replacement","description":"\u003cstrong\u003eAllstar Performance ALL26020 is a 14\" x 3\" replacement paper air filter element designed to improve airflow while providing reliable particle filtration for racing and street applications.\u003c\/strong\u003e\n\n\u003cp\u003eThis paper-element air filter from Allstar Performance is built to balance increased airflow with dependable filtration. Sized at 14 inches diameter by 3 inches height, the ALL26020 fits many applications that require a compact, high-flow element. It’s a drop-in style replacement made from pleated paper media, offered as a straightforward, serviceable component for intake systems where simplicity and cost-effectiveness matter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the key dimensions and packaging details?\u003c\/h3\u003e\n\u003cp\u003eThe filter measures 14\" in diameter and 3\" tall, making it suitable for tight intake spaces. Packaging information provides useful guidance for shipping, storage and clearance checks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFilter size: 14 inches (diameter) x 3 inches (height)\u003c\/li\u003e\n  \u003cli\u003ePackage length: 37.592 centimeters\u003c\/li\u003e\n  \u003cli\u003ePackage width: 38.862 centimeters\u003c\/li\u003e\n  \u003cli\u003ePackage height: 11.176 centimeters; package weight: 1.7 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this paper element affect airflow and filtration?\u003c\/h3\u003e\n\u003cp\u003ePleated paper media increases exposed surface area to promote better airflow than flat filters while still catching dust and debris. This design is an economical choice for drivers who want improved breathing for the engine without the maintenance of reusable media.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePleated paper increases effective filtration area\u003c\/li\u003e\n  \u003cli\u003eOptimized for steady airflow in compact housings\u003c\/li\u003e\n  \u003cli\u003eDisposable element—replace when dirty for consistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich installations and maintenance routines suit this filter?\u003c\/h3\u003e\n\u003cp\u003eThe ALL26020 fits many standard intake housings that accept 14\" x 3\" elements; it’s ideal when a simple swap is preferred over custom or oiled filters. Maintenance is minimal: inspect periodically and replace when visibly clogged or per service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-in replacement for compatible intake housings\u003c\/li\u003e\n  \u003cli\u003eInspect during routine service; replace if heavily soiled\u003c\/li\u003e\n  \u003cli\u003eNo oiling required—dispose and install new element\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work for performance or daily-driving applications?\u003c\/h3\u003e\n\u003cp\u003eThe Allstar paper element is suitable for both spirited driving and regular street use where easy servicing and cost control are priorities. It delivers a balance of flow and filtration that meets many non-specialized performance needs without complex upkeep.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGood choice for racers wanting straightforward, replaceable filters\u003c\/li\u003e\n  \u003cli\u003ePractical option for commuters seeking reliable intake protection\u003c\/li\u003e\n  \u003cli\u003eAffordable replacement for seasonal or frequent service schedules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Allstar Performance ALL26020 14\" x 3\" paper air filter element is aimed at mechanics, hobbyists and racers who need a compact, economical replacement filter that increases airflow compared with flat elements, while keeping engine intake contamination in check. Choose this filter if you prefer a low-maintenance, disposable media with clear size specifications and straightforward packaging for shipping or storage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the ALL26020 washable or reusable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the ALL26020 is a disposable paper element; replace it when it becomes noticeably dirty for best performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size intake housings does this fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits housings designed for a 14\" diameter by 3\" height filter element; confirm your housing dimensions before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67591688716473,"sku":"B003BZYYOO","price":76.61,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-front-view-element.jpg?v=1790557593"},{"product_id":"allstar-performance-hei-advance-curve-kit-for-1974-1979-gm-distributors-direct-fit-centrifugal-weights-springs","title":"Allstar Performance HEI Advance Curve Kit for 1974–1979 GM Distributors — Direct-fit centrifugal weights \u0026 springs","description":"\u003cp\u003e\u003cstrong\u003eThe Allstar Performance ALL81300 HEI Advance Curve Kit provides direct-fit centrifugal advance components to reconfigure the timing curve on compatible 1974–1979 GM HEI distributors (non-computer controlled).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit supplies the mechanical parts needed to alter how quickly and how much the distributor advances with engine rpm. Intended for non-computer-controlled GM HEI distributors from 1974–1979, the package groups replacement weights, a center plate, color-coded springs, nylon bushings and clear instructions so you can tailor advance behavior without machining or exotic tooling.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit change my distributor’s timing behavior?\u003c\/h3\u003e\n\u003cp\u003eSwapping the supplied weights, springs and center plate lets you modify the centrifugal advance curve — that is, the rate and amount of advance as engine RPM rises. Softer springs or lighter weights make the advance occur earlier and more gradually; stiffer springs or heavier weights delay and slow the advance. Make incremental changes and test on the road or a dyno to dial in the response you want.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes two centrifugal weights for different inertia profiles\u003c\/li\u003e\n  \u003cli\u003eThree sets of color-coded springs to adjust advance rate\u003c\/li\u003e\n  \u003cli\u003eCenter plate changes lever geometry for different advance ranges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my HEI distributor?\u003c\/h3\u003e\n\u003cp\u003eThe ALL81300 is designed specifically for 1974–1979 GM HEI distributors that are not controlled by an engine computer. It won’t fit later computer-controlled HEI units or distributors that deviate from the original GM mechanical layout. Always verify your distributor year and whether an ECU controls ignition before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 1974–1979 GM HEI distributors (non-computer controlled)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with ECU-controlled HEI systems\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement parts for original distributor geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and what tools will I need to install it?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with two weights, a replacement center plate, three color-coded spring sets, two pairs of nylon bushings and step-by-step instructions. Installation typically requires common hand tools, a timing light, and a clean work area; moderate mechanical skill is recommended for safe, accurate timing adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo centrifugal weights and a center plate for curve changes\u003c\/li\u003e\n  \u003cli\u003eThree color-coded spring sets and two pairs of nylon bushings\u003c\/li\u003e\n  \u003cli\u003eComplete instructions; typical tools include screwdrivers, pliers, and a timing light\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I decide which spring or weight combination to use?\u003c\/h3\u003e\n\u003cp\u003eStart with the stock-equivalent parts supplied, then move to lighter or stiffer combinations based on driveability, throttle response and engine load. Use small changes and record results: smoother idle, desired vacuum advance behavior and where peak torque occurs will guide your selection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBegin with stock-like setup, then test one change at a time\u003c\/li\u003e\n  \u003cli\u003eRecord rpm ranges where advance changes improve response or torque\u003c\/li\u003e\n  \u003cli\u003eUse dyno or road testing to confirm final combination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Allstar Performance ALL81300 HEI Advance Curve Kit is aimed at classic GM owners, hot-rodders and mechanics who want to fine-tune distributor centrifugal advance on 1974–1979 non-computer HEI systems. If you maintain or modify a vintage GM V8 and need predictable timing behavior without replacing the entire distributor, this kit offers a direct, serviceable solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit computer-controlled HEI distributors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The ALL81300 fits only 1974–1979 GM HEI distributors that are not controlled by an engine computer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are installation instructions included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes complete instructions along with the weights, springs, center plate and bushings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67591799963833,"sku":"B003BZZBLY","price":65.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-advance-curve-kit-front.jpg?v=1790558528"},{"product_id":"allstar-performance-3-an-braided-stainless-ptfe-lined-hose-36-straight-female-to-female-durable-brake-fluid-line","title":"Allstar Performance 3 AN Braided Stainless PTFE-Lined Hose — 36\" Straight Female to Female, Durable Brake\/Fluid Line","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance 36-inch AN braided stainless hose with PTFE liner is a durable 3 AN straight-female to 3 AN straight-female line engineered for brake and fluid-routing applications where flexibility, abrasion resistance, and chemical compatibility matter.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hose assembly combines a low-friction PTFE inner core with a braided stainless-steel outer cover and crimped AN fittings to deliver a longer-lasting, flexible fluid line suitable for demanding automotive and motorsport use. The overall length of 36 inches includes the fittings, and the hose is offered here with straight female fittings on both ends for simple, direct connections. Built in the United States, the construction prioritizes chemical resistance to common brake fluids and improved wear resistance compared with conventional rubber hoses.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the PTFE lining improve hose performance?\u003c\/h3\u003e\n\u003cp\u003eThe PTFE (polytetrafluoroethylene) inner liner resists swelling and degradation from brake fluids and many hydraulic fluids, preserving flow characteristics over time. Its smooth, low-friction surface helps maintain consistent response and reduces the chance of internal abrasion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResists chemical attack from DOT brake fluids\u003c\/li\u003e\n  \u003cli\u003eMaintains internal diameter and flow under pressure\u003c\/li\u003e\n  \u003cli\u003eReduces fluid drag for consistent pedal\/actuator response\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose braided stainless outer cover instead of rubber?\u003c\/h3\u003e\n\u003cp\u003eThe braided stainless-steel braid adds abrasion and heat resistance, protecting the inner liner where hoses pass through tight, moving, or exposed areas. Compared with rubber hoses, braided lines are less likely to rub through, kink, or age prematurely when exposed to heat and road debris.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGuards against chafing and external wear\u003c\/li\u003e\n  \u003cli\u003eImproves dimensional stability under flexing and vibration\u003c\/li\u003e\n  \u003cli\u003eOffers corrosion resistance for longer service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this hose for my vehicle's brake system or other fluid systems?\u003c\/h3\u003e\n\u003cp\u003eThis 3 AN hose is designed to be compatible with brake fluids and many hydraulic fluids thanks to the PTFE liner, but installation must match your vehicle’s fittings, pressure requirements, and routing needs. Confirm AN size, fitting orientation, and system pressure ratings before replacing critical lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3 AN size fits systems using that standard fitting diameter\u003c\/li\u003e\n  \u003cli\u003eStraight female fittings suit direct inline connections\u003c\/li\u003e\n  \u003cli\u003eLength stated (36\") is measured end-to-end including fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the hose handle bending, vibration, and installation demands?\u003c\/h3\u003e\n\u003cp\u003eThe combination of a flexible PTFE core and a braided outer jacket is ideal where bending and flexing occur; it resists kinking and maintains integrity under repeated motion. The hose is also lightweight and compact, making routing simpler in tight engine bays or chassis runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to flex repeatedly without internal collapse\u003c\/li\u003e\n  \u003cli\u003eSuitable for tight routing where movement occurs\u003c\/li\u003e\n  \u003cli\u003eLightweight construction minimizes added unsprung or rotating mass\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e This Allstar Performance 36\" 3 AN braided stainless PTFE-lined hose is intended for builders, fabricators, racers, and vehicle owners who need a reliable, abrasion-resistant replacement or upgrade line. Choose this part if you require a straight-female 3 AN to straight-female 3 AN configuration, a 36-inch overall length, and a hose that resists brake fluid exposure and mechanical wear better than standard rubber hoses. Always verify compatibility with your vehicle’s fittings, pressure requirements, and local safety regulations before installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProduct type: AUTO PART\u003c\/li\u003e\n  \u003cli\u003ePackage dimensions: 2.6 cm L x 14.4 cm W x 15.6 cm H\u003c\/li\u003e\n  \u003cli\u003eCountry of origin: United States\u003c\/li\u003e\n  \u003cli\u003ePackage weight: 0.2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with DOT brake fluid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the PTFE inner liner is chemically compatible with common DOT brake fluids, reducing swelling and degradation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 36-inch length include fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the length stated is overall end-to-end and includes the fittings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67592152809657,"sku":"B009Q759OK","price":59.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-3-an-36in-straight-stainless-braided-hose.jpg?v=1790561993"},{"product_id":"allstar-performance-high-pressure-grease-4-oz-tube-high-load-protection-anti-galling-lubricant","title":"Allstar Performance High Pressure Grease 4 oz Tube — High-Load Protection \u0026 Anti-Galling Lubricant","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance High Pressure Grease is a compact, heavy-duty 4 oz tube lubricant made for high-load contacts like splines, threaded adjusters, and engine fasteners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned from formulations first used in the tool-and-die trade, this grease delivers robust wear protection and long-lasting adherence under pressure. It often replaces traditional anti-seize in demanding mechanical joints where metal-to-metal contact and repeated motion require a resilient film that resists squeeze-out. Supplied in a convenient 4 ounce tube, it’s sized for workshop tasks, trackside tweaks, and routine maintenance jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this grease perform on spline-to-spline connections?\u003c\/h3\u003e\n\u003cp\u003eOn interlocking spline surfaces the grease creates a consistent, load-bearing lubricant layer that reduces fretting and wear. Its high-pressure formulation keeps the lubricating film intact during oscillation and torque transmission.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents metal-on-metal scoring under heavy loads\u003c\/li\u003e\n  \u003cli\u003eMaintains film thickness during repeated motion\u003c\/li\u003e\n  \u003cli\u003eHelps reduce noise and binding in tight spline fits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it on threaded adjusters and engine fasteners?\u003c\/h3\u003e\n\u003cp\u003eYes — the product is recommended for threaded adjusters and many engine fastener applications where controlled assembly torque and corrosion resistance are important. It eases installation and can reduce the risk of galling without introducing excessive runout or contamination when applied correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves torque consistency during assembly\u003c\/li\u003e\n  \u003cli\u003eResists seizing and galling under heat and pressure\u003c\/li\u003e\n  \u003cli\u003eSmall tube size is ideal for targeted application on bolts and adjusters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this different from standard anti-seize compounds?\u003c\/h3\u003e\n\u003cp\u003eUnlike some anti-seize pastes that rely on metallic fillers, this high-pressure grease emphasizes a durable lubricant film tailored for dynamic contacts. It replaces anti-seize in many scenarios where a stable, clingy grease performs better under motion and repeated contact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulated for sustained adhesion under shear\u003c\/li\u003e\n  \u003cli\u003eLess likely to migrate away from the contact zone compared with some pastes\u003c\/li\u003e\n  \u003cli\u003eBetter suited for moving splines and wear surfaces than rigid anti-seize greases\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and apply the 4 oz tube for best results?\u003c\/h3\u003e\n\u003cp\u003eKeep the tube capped and stored in a cool, dry place away from direct sunlight; this preserves consistency and performance. Apply a thin, even layer to cleaned contact surfaces and avoid over-application to prevent attracting dirt and debris.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean mating surfaces before applying grease\u003c\/li\u003e\n  \u003cli\u003eApply sparingly to avoid excess build-up\u003c\/li\u003e\n  \u003cli\u003eRecap tube after use to maintain shelf life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, fabricators, and motorsport hobbyists who need a compact, high-pressure lubricant for precision mechanical joints will find this 4 oz Allstar Performance tube practical and effective. It’s suited to professional shops performing maintenance on drivetrains, steering components, and assemblies with tight spline fits, and to weekend mechanics who value a dependable product that replaces anti-seize in many moving-contact applications. For small jobs and targeted re-lubrication, the tube format offers controlled dispensing, while the heavy-duty formulation stands up to demanding conditions without constant reapplication.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this grease safe for engine bolts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s recommended for many engine fasteners to reduce galling and improve torque consistency when applied sparingly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much product is in the tube?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tube contains 4 ounces of high-pressure grease, suitable for multiple targeted applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67592456995001,"sku":"B01LY2NNPJ","price":55.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-high-pressure-grease-tube-front.jpg?v=1790564060"},{"product_id":"allstar-performance-bubble-gum-fuel-fragrance-4-oz-bottle-clear-scent-for-methanol-gasoline","title":"Allstar Performance Bubble Gum Fuel Fragrance 4 oz Bottle — Clear Scent for Methanol, Gasoline","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance ALL78131 Bubble Gum fuel fragrance is a concentrated 4 oz scent you add to methanol, nitromethane, gasoline or 2-cycle mixtures to give fuel a clear, long-lasting bubble-gum aroma.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUse this resealable 4 oz bottle to scent fuel for hobby engines, RC vehicles, show displays or promotional projects without changing fuel clarity. The concentrate mixes clear into fuel and is formulated to be compatible with common fuels used in racing and hobby applications, treating roughly 30–55 gallons of alcohol-based fuels or about 20 gallons of gasoline per bottle. The product is designed for easy measuring and storage in its compact bottle.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use this fragrance with my fuel?\u003c\/h3\u003e\n\u003cp\u003eAdd a measured amount of the Allstar Performance ALL78131 Bubble Gum fragrance directly to your fuel and agitate the container gently to combine; the scent disperses clearly without clouding. Use a small graduated bottle or syringe for precise dosing and always store the resealable bottle upright and away from open flames.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to mix clear with methanol, nitromethane, gasoline and many 2-cycle blends\u003c\/li\u003e\n  \u003cli\u003eTreats 30–55 gallons of alcohol fuels or ~20 gallons of gasoline per 4 oz bottle\u003c\/li\u003e\n  \u003cli\u003eUse precise measuring tools (syringe or graduated dropper) for consistent scent strength\u003c\/li\u003e\n  \u003cli\u003eResealable cap keeps leftover concentrate usable for later\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this change my engine performance or fuel handling?\u003c\/h3\u003e\n\u003cp\u003eThe fragrance is formulated to add aroma without altering fuel clarity or routine handling when used in recommended amounts. It’s intended as an additive for scent only, so follow normal fuel storage and safety practices; do not exceed suggested dosing for large-scale applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulated to remain clear once mixed — no visible residue expected\u003c\/li\u003e\n  \u003cli\u003eMeant for scenting, not as a performance enhancer or stabilizer\u003c\/li\u003e\n  \u003cli\u003eCompatible with many common hobby and racing fuels when dosed correctly\u003c\/li\u003e\n  \u003cli\u003eKeep away from heat, sparks and open flame during handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much fragrance should I add for different fuel volumes?\u003c\/h3\u003e\n\u003cp\u003eA single 4 oz bottle covers a range depending on fuel type: approximately 30–55 gallons of alcohol-based fuels (methanol\/nitro blends) or about 20 gallons of gasoline. Start with a small amount, test a sample tank, and increase slightly if a stronger scent is desired; this avoids over-scenting and reduces waste.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApproximate coverage: 30–55 gal alcohol fuels or ~20 gal gasoline per bottle\u003c\/li\u003e\n  \u003cli\u003eBegin with a conservative dose and scale up after confirming scent level\u003c\/li\u003e\n  \u003cli\u003eUse labeled measurement tools to ensure consistent batches\u003c\/li\u003e\n  \u003cli\u003eKeep leftover concentrate sealed for future mixes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis bottle measures roughly 5 inches long by 2 inches high by 2 inches wide, making it easy to tuck into a pit box, workshop drawer or storage cabinet. The compact size also helps control dosing and reduces the chance of spills compared with larger containers.\u003c\/p\u003e\n\n\u003cp\u003eWho is this for? If you run RC cars, planes, boats, model engines, or display vehicles and want to add a fun bubble-gum aroma to fuel for events, shows or hobby use, the Allstar Performance ALL78131 Bubble Gum fragrance offers a practical, concentrated option. It’s suited to hobbyists and event coordinators who need a clear-mixing scent in a resealable, portable bottle; it’s not intended as an engine treatment or fuel stabilizer.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this fragrance in 2-stroke mixed fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Allstar fragrance is compatible with many 2-cycle mixtures when used in recommended amounts; measure carefully.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many gallons does one 4 oz bottle treat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One 4 oz bottle treats about 30–55 gallons of alcohol fuels or about 20 gallons of gasoline, depending on desired scent strength.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67592651931833,"sku":"B007ZQS4AK","price":55.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-bubble-gum-front-label.jpg?v=1790566807"},{"product_id":"allstar-performance-timken-wheel-bearing-grease-16-oz-tub-red-high-temperature-water-resistant-lithium-complex","title":"Allstar Performance Timken wheel bearing grease 16 oz tub — red high-temperature, water-resistant lithium-complex","description":"\u003cstrong\u003eAllstar ALL78241 is a Timken-branded, high-temperature red wheel bearing grease in a 16 oz tub designed for disc and drum bearings that need durable, water-resistant lubrication.\u003c\/strong\u003e\n\n\u003cp\u003eThis premium grease blends a lithium-complex thickener with specialty additives to protect bearings under heavy load, wet conditions, and high operating temperatures. Certified to top NLGI performance categories for chassis (LB) and wheel bearing (GC) service, the formula resists softening, fights corrosion, and reduces wear so components run cleaner and last longer. The tub format is convenient for garages, home mechanics, and fleet shops that need a reliable, single-application grease supply.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this grease perform under heat and heavy load?\u003c\/h3\u003e\n\u003cp\u003eThe grease uses a lithium-complex (NLGI No. 2) thickener and a high-temperature base that maintains consistency instead of thinning out under heat. A measured Timken OK load rating of 55 indicates strong load-carrying ability for axle and wheel hub applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature formulation resists breakdown in hot service\u003c\/li\u003e\n  \u003cli\u003e55 Timken OK load for enhanced load-bearing performance\u003c\/li\u003e\n  \u003cli\u003eLithium-complex thickener preserves mechanical stability during stress\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it protect bearings from water, corrosion, and wear?\u003c\/h3\u003e\n\u003cp\u003eYes — the blend contains water-resistant and anti-wear additives plus corrosion inhibitors to guard surfaces from moisture and oxidation. That combination helps prevent pitting and accelerated wear in wet or salty environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWater-resistant additives repel moisture intrusion into grease films\u003c\/li\u003e\n  \u003cli\u003eCorrosion inhibitors slow rust and chemical attack on metal parts\u003c\/li\u003e\n  \u003cli\u003eAnti-wear agents reduce friction and surface damage under repeated cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this grease suitable for both disc and drum bearing applications?\u003c\/h3\u003e\n\u003cp\u003eIt is formulated for both disc and drum wheel bearings and meets NLGI designations for chassis and wheel bearing duties, making it a versatile choice across many vehicle types. The grease’s consistency and additive package suit the demands of rotating assemblies and hub bearings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCertified for NLGI LB (chassis) and GC (wheel bearing) service\u003c\/li\u003e\n  \u003cli\u003eCompatible with typical automotive disc and drum bearing assemblies\u003c\/li\u003e\n  \u003cli\u003eWorks in repeated start\/stop and continuous-rotation conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the product packaged and what warranty is included?\u003c\/h3\u003e\n\u003cp\u003eThe grease is supplied in a 16-ounce tub that’s easy to handle in shops or at home and is sold individually for single-tub purchases. A limited 90-day factory warranty backs the product, offering short-term coverage for manufacturing defects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16 oz plastic tub for convenient storage and dispensing\u003c\/li\u003e\n  \u003cli\u003eIndividual unit sales — buy the exact quantity you need\u003c\/li\u003e\n  \u003cli\u003e90-day limited factory warranty included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Mechanics, restoration enthusiasts, fleet maintenance teams, and DIY vehicle owners who need a reliable, high-temperature wheel bearing grease that resists water and corrosion. Choose Allstar ALL78241 when you want Timken-branded performance in a ready-to-use 16 oz tub for axle hubs, wheel bearings, and chassis lubrication points where long-lasting protection and load capacity matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this grease on wheel hubs exposed to water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The formula includes water-resistant additives and corrosion inhibitors to protect wheel hubs in wet conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this grease suitable for high-temperature applications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The lithium-complex thickener and additives maintain consistency and performance in elevated temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67592904835257,"sku":"B006K8VIAM","price":59.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-timken-red-grease-16oz-tub-front-view.jpg?v=1790569452"},{"product_id":"allstar-performance-steering-wheel-extension-2-00-black-anodized-aluminum-spacer-lightweight-reversible-fit-with-hardware-incl","title":"Allstar Performance steering wheel extension — 2.00\" black anodized aluminum spacer, lightweight reversible fit with hardware incl","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance ALL52316 is a 2.00-inch black anodized aluminum steering wheel extension that increases the distance between the driver and the wheel for improved fit and reach.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact billet spacer is made from high-quality aluminum with a durable black anodized finish and installs between a steering wheel and a quick-disconnect hub. Sold individually and shipped with the necessary fasteners, the ALL52316 offers a simple, reversible way to fine-tune driving position without changing the wheel or hub. It’s manufactured in the United States and carries a 90-day limited factory warranty.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this extension change driving position?\u003c\/h3\u003e\n\u003cp\u003eAdding the 2.00-inch spacer moves the steering wheel farther from the driver, creating extra reach and room, which can improve comfort or accommodate safety equipment. The extension preserves wheel angle and hub alignment so handling characteristics remain unchanged. Installation keeps the original quick-disconnect functionality intact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreases wheel-to-driver distance by precisely 2.00 inches\u003c\/li\u003e\n  \u003cli\u003eMaintains original steering wheel alignment and rotation\u003c\/li\u003e\n  \u003cli\u003eWorks with existing quick-disconnect hubs and supplied fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my car and steering setup?\u003c\/h3\u003e\n\u003cp\u003eThe spacer is designed to mount between a standard steering wheel and a compatible quick-disconnect hub; compatibility depends on bolt pattern and hub clearance. Because it is sold as a single spacer, confirm measurements and bolt pattern match before purchase. It’s ideal for motorsports and custom applications where hub and wheel hardware are already in place.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2\" thickness engineered for universal-style wheel spacers\u003c\/li\u003e\n  \u003cli\u003eRequires matching bolt pattern and hub clearance\u003c\/li\u003e\n  \u003cli\u003eFasteners included to simplify installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish does the ALL52316 use?\u003c\/h3\u003e\n\u003cp\u003eThe spacer is machined from high-grade aluminum for strength with minimal added weight, then black anodized to resist corrosion and provide a durable, low-glare surface. The anodized coating also gives a uniform appearance that pairs well with most steering wheels and racing hardware. Lightweight construction minimizes impact on steering dynamics while delivering reliable service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality aluminum core for stiffness and low weight\u003c\/li\u003e\n  \u003cli\u003eBlack anodized finish for corrosion resistance and consistent looks\u003c\/li\u003e\n  \u003cli\u003eManufactured in the United States with included hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with steering wheel and quick-disconnect hardware: remove the wheel or hub, place the spacer, and reassemble using the supplied fasteners. No special tools beyond standard hand tools are typically required. The product ships individually with mounting bolts and basic instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with the necessary fasteners for attachment\u003c\/li\u003e\n  \u003cli\u003eTypically installs using common hand tools\u003c\/li\u003e\n  \u003cli\u003ePackaged dimensions: 12.953 cm L x 8.128 cm W x 5.334 cm H; weight about 0.7 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Allstar Performance ALL52316 steering wheel extension is aimed at racers, track-day drivers, and custom-vehicle builders who need a precise, lightweight way to increase wheel reach while preserving hub function. It’s also useful for drivers who wear racing harnesses, thicker clothing, or want a modest ergonomic adjustment without changing their steering wheel or hub. Choose this spacer when you want a durable, reversible, and professionally finished solution backed by a short-term factory warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the spacer include mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the ALL52316 ships with the required fasteners for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this spacer reversible or permanent?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is reversible; remove the spacer and reinstall the original wheel\/hub to return to stock configuration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67593044689081,"sku":"B006K8NBX4","price":55.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-steering-wheel-extension-front.jpg?v=1790571321"},{"product_id":"allstar-performance-16-9-oz-primer-bottle-with-angled-filler-tube-and-tapered-tip-for-accurate-priming","title":"Allstar Performance 16.9 oz Primer Bottle with Angled Filler Tube and Tapered Tip for Accurate Priming","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance 16.9 oz. Primer Bottle (ALL40090) is a durable squeeze bottle with an angled filler tube designed to make priming alcohol-fueled engines quick and controlled.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact primer bottle is built for hobbyists and mechanics who work with alcohol-carbureted engines and need a reliable way to introduce fuel into a carburetor bowl or vent tube. Constructed from tough plastic, the bottle withstands repeated squeezing and shop use while its angled cap and tapered tip access tight openings without mess. With a 16.9-ounce capacity, it holds enough fluid for multiple priming tasks while remaining small enough to store in a toolbox or pit bag.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the angled filler tube improve priming accuracy?\u003c\/h3\u003e\n\u003cp\u003eThe cap’s angled filler tube positions the tapered tip precisely into a carburetor vent tube or fuel bowl opening, reducing spills and wasted fuel. Angling the tip makes it easier to reach awkward ports without tilting the engine or bottle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAngled tube aligns with carb vent tubes for targeted delivery\u003c\/li\u003e\n  \u003cli\u003eTapered tip fits snugly into small openings to prevent drips\u003c\/li\u003e\n  \u003cli\u003eControlled squeeze action lets you meter fuel one drop at a time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction make this bottle durable?\u003c\/h3\u003e\n\u003cp\u003eThe bottle is molded from resilient plastic engineered to endure repeated compression and contact with common fuels used in alcohol engines. The cap seals securely to prevent leaks, and the molded body resists cracking from regular workshop handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick-walled plastic resists wear and deformation\u003c\/li\u003e\n  \u003cli\u003eSnap-fit cap design helps maintain a tight seal during transport\u003c\/li\u003e\n  \u003cli\u003eChemical-resistant material tolerates common alcohol-based fuels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow large is the bottle and is it practical for mobile use?\u003c\/h3\u003e\n\u003cp\u003eWith a 16.9-ounce (roughly 0.5 liter) capacity, the bottle strikes a balance between volume and portability. It holds enough primer for several startups or tuning sessions while staying compact enough for a pit bag, toolbox, or shelf.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16.9 oz capacity for multiple priming cycles\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits most storage compartments and toolkits\u003c\/li\u003e\n  \u003cli\u003eLightweight for carrying to the track or workshop\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tasks is this primer bottle best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis bottle is designed specifically for priming alcohol-fueled engines, topping off carburetor bowls, and delivering measured amounts of fuel into tight engine ports. It’s not intended as a long-term storage container for corrosive chemicals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePriming carburetor fuel bowls and vent tubes\u003c\/li\u003e\n  \u003cli\u003eApplying small, measured amounts of fuel during setup or tuning\u003c\/li\u003e\n  \u003cli\u003eQuick refills during trackside maintenance or hobby RC engine use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Allstar Performance 16.9 oz. Primer Bottle (ALL40090) is ideal for RC hobbyists, small-engine tuners, and race teams who use alcohol-based fuels and need a dependable, mess-reducing method to prime carburetors. It’s also useful for any mechanic who prefers a compact, durable squeeze bottle for controlled fuel delivery when working in tight engine spaces.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this bottle handle alcohol-based fuels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the bottle is made from chemical-resistant plastic suited for common alcohol fuels used in carbureted engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the tapered tip compatible with carburetor vent tubes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the angled cap with tapered tip is designed to fit into carburetor vent tubes for targeted priming.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67593152102585,"sku":"B009Q74MWK","price":57.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-primer-bottle-front.jpg?v=1790572425"},{"product_id":"allstar-performance-hood-pin-kit-4in-chrome-pins-with-3-16in-flip-over-clips-and-scuff-plates","title":"Allstar Performance hood pin kit — 4in chrome pins with 3\/16in flip-over clips and scuff plates","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance ALL18512 is a complete chrome steel hood pin kit with 4\" pins and 3\/16\" flip-over clips designed to secure aftermarket or race hoods quickly and reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Allstar Performance hood pin set gives you a durable, vehicle-specific fastening option for hoods, lightweight panels and racing-style applications. Each kit includes two 4\" × 1\/2\" diameter chrome steel pins, chrome scuff plates, mating clips and four nuts. You can choose the flip-over clip configuration for fast, tool-free locking or select a hairpin-style clip depending on your preference. The parts are made in the United States and packaged to fit easily into a project or race-prep toolbox.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hood pin kit secure a hood during high-vibration driving?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit uses solid chrome steel pins that pass through pre-drilled hood and frame holes and lock with a flip-over clip, preventing upward or lateral movement. The flip-over clip is sized at 3\/16\" to hold the pin head down firmly while still allowing quick removal without tools.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTwo 4\" × 1\/2\" chrome steel pins resist bending under load\u003c\/li\u003e\n  \u003cli\u003e3\/16\" flip-over clips offer positive, tool-free engagement\u003c\/li\u003e\n  \u003cli\u003eScuff plates protect the hood finish around each pin hole\u003c\/li\u003e\n  \u003cli\u003eNuts included for secure attachment to the vehicle frame\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components come in the ALL18512 kit and are replacements available?\u003c\/h3\u003e\n\n\u003cp\u003eThe package contains two pins, two scuff plates, two clips and four nuts—everything needed for a two-pin installation. Because Allstar Performance designs these parts for motorsport and street use, individual components (clips, pins, plates) are typically available as spare parts through performance parts dealers when replacements are needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTwo chrome steel pins (4\" length, 1\/2\" diameter)\u003c\/li\u003e\n  \u003cli\u003eTwo chrome scuff plates to protect paint and panel edges\u003c\/li\u003e\n  \u003cli\u003eTwo flip-over clips sized at 3\/16\" for quick locking\u003c\/li\u003e\n  \u003cli\u003eFour nuts for mounting and securing the assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my car and how hard is installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit is vehicle-specific in fit type, but installation typically requires drilling two aligned holes through the hood and the support structure. Installation difficulty varies by vehicle and experience: a basic mechanical skill set and common hand tools are usually sufficient, but professional installation is recommended if you’re uncomfortable aligning or drilling body panels.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFit type: Vehicle Specific—check fit guides for compatibility\u003c\/li\u003e\n  \u003cli\u003eBasic tools: drill, hole saw or step bit, wrenches for nuts\u003c\/li\u003e\n  \u003cli\u003eScuff plates help align and protect the hood finish during drilling\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended for precision alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and dimensions should I expect from the kit parts?\u003c\/h3\u003e\n\n\u003cp\u003eAll major components are chrome-plated steel for corrosion resistance and strength. The pins measure 4 inches long with a 1\/2 inch diameter; the flip-over clip is 3\/16 inch gauge for secure retention. The package is compact and lightweight, making it easy to ship and store.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePins: 4\" length × 1\/2\" diameter, chrome steel\u003c\/li\u003e\n  \u003cli\u003eClip style: 3\/16\" flip-over chrome clip for quick release\u003c\/li\u003e\n  \u003cli\u003eScuff plates: chrome finish to protect painted surfaces\u003c\/li\u003e\n  \u003cli\u003eOrigin: Manufactured in the United States, packaged dimensions small\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Allstar Performance ALL18512 hood pin kit is aimed at racers, track-day enthusiasts and street-performance builders who need a reliable, quick-access hood retention system. It’s also suitable for hobbyists updating classic cars or customizing show vehicles where durable appearance and easy operation matter. If you need a rugged, chrome-finished, ready-to-install two-pin solution with flip-over clips, this kit delivers functional hardware with motorsport pedigree.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes two pins, two scuff plates, two flip-over clips and four nuts; drilling and basic tools are required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the clips easy to remove for hood access?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 3\/16\" flip-over clips provide quick, tool-free locking and removal for fast hood access.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67593221636281,"sku":"B003BZQ9DI","price":56.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-hood-pin-kit-front-packaging.jpg?v=1790573235"},{"product_id":"allstar-performance-engine-lift-plate-yellow-zinc-fits-holley-4150-4160-zinc-coated-adapter","title":"Allstar Performance Engine Lift Plate, Yellow Zinc — Fits Holley 4150\/4160, Zinc-Coated Adapter","description":"\u003cp\u003e\u003cstrong\u003eThe Allstar Performance engine lift plate is a zinc‑coated adapter that bolts to the intake in place of a carburetor to provide a safe, secure lifting point for engine removal and installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen working on engine swaps or major service, having a dedicated lifting bracket simplifies handling and reduces risk. This Allstar Performance lift plate replaces the carburetor and threads into standard intake bolt patterns so hoists and engine cranes can attach without stress on intake components. It’s made in the United States and finished in yellow zinc for corrosion resistance during workshop storage and use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this lift plate attach to my engine?\u003c\/h3\u003e\n\u003cp\u003eThe plate replaces the carburetor and secures to the intake manifold using the carburetor bolt pattern. It is compatible with common square‑bore and spread‑bore patterns, allowing direct mounting where a Holley, Edelbrock, Quadrajet or similar carburetor would sit. Installation is straightforward for anyone familiar with intake hardware removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolts into place of carburetor using existing manifold studs or bolts\u003c\/li\u003e\n  \u003cli\u003eDesigned for Holley 4150\/4160 and 4500 Dominator bolt patterns\u003c\/li\u003e\n  \u003cli\u003eAlso fits Edelbrock, Quadrajet, Carter, Motorcraft and Carter AFB patterns\u003c\/li\u003e\n  \u003cli\u003eYellow zinc finish helps resist surface corrosion in garage environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and carburetors is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis plate fits a wide range of carburetor flange standards commonly used on American V8 and V6 small‑block and big‑block intakes. It’s vehicle‑specific only in the sense that the intake must have one of the supported bolt patterns. Check your carburetor flange type before ordering to ensure fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Holley 4150 and 4160 square‑bore patterns\u003c\/li\u003e\n  \u003cli\u003eWorks with Holley 4500 Dominator bolt arrangements\u003c\/li\u003e\n  \u003cli\u003eFits Rochester Quadrajet, Carter, Motorcraft and Edelbrock Q‑Jet flanges\u003c\/li\u003e\n  \u003cli\u003eNot a universal manifold adapter—confirm flange type first\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow strong and durable is the lift plate for repeated engine jobs?\u003c\/h3\u003e\n\u003cp\u003eConstructed for shop use, the plate provides a solid, centralized lifting point so engine hoists bear weight through the intake flange area designed for such loads. The yellow zinc coating offers extra protection against rust and wear from repeated handling, while the American manufacturing ensures consistent machining and threads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt to withstand routine engine removal and installation cycles\u003c\/li\u003e\n  \u003cli\u003eZinc plating reduces oxidation after storage and exposure\u003c\/li\u003e\n  \u003cli\u003eThreaded holes are machined to standard dimensions for secure bolting\u003c\/li\u003e\n  \u003cli\u003eCompact, low‑profile design minimizes interference with surrounding components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the package dimensions and origin?\u003c\/h3\u003e\n\u003cp\u003eThe lift plate ships in compact packaging suitable for parts shelves and bench storage. It’s manufactured in the United States and arrives ready to install with standard hardware engagement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage size approximately 5.6 x 20.2 x 27.9 cm\u003c\/li\u003e\n  \u003cli\u003ePackage weight about 1.219 kg\u003c\/li\u003e\n  \u003cli\u003eCountry of origin: United States\u003c\/li\u003e\n  \u003cli\u003eFit type: Vehicle specific—matches listed carburetor flange patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Allstar Performance engine lift plate is aimed at professional mechanics, restoration enthusiasts, and home‑garage DIYers who perform engine swaps or frequent heavy‑service work. If you remove engines, modify intakes, or need a dependable lifting anchor that matches Holley, Edelbrock, Quadrajet or Carter flange standards, this plate reduces lift time and helps protect delicate components during handling.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this plate fit my Holley 4150 carburetor flange?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The plate is made to fit Holley 4150\/4160 bolt patterns and mounts where the carburetor normally sits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the finish corrosion resistant for workshop use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The lift plate has a yellow zinc coating to protect against rust and everyday shop exposure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67593478013113,"sku":"B003BZQQWM","price":69.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-engine-lift-plate-front.jpg?v=1790576028"},{"product_id":"allstar-performance-metric-weld-on-rear-caliper-bracket-for-3-axles-11-75-rotor-fit-1-4-steel","title":"Allstar Performance Metric Weld-On Rear Caliper Bracket for 3\" Axles — 11.75\" Rotor Fit, 1\/4\" Steel","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance ALL42102 is a heavy-duty, weld-on rear brake caliper bracket engineered to mount GM metric calipers to 3\" axle housings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis steel weld-on caliper bracket lets you convert or upgrade rear brake setups where a fixed, durable attachment is required. Fabricated from 1\/4\" thick steel and finished in a natural bare-metal state, the bracket is sized for 3-inch diameter axle tubes and accepts 11.75\" rotors. It’s sold individually so you can purchase exactly what you need for single-side fabrication or matched axle installations.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my axle and rotor combination?\u003c\/h3\u003e\n\u003cp\u003eYes — the ALL42102 is specifically built for 3\" (3.00\" OD) axle housings and is compatible with 11.75\" diameter rotors when paired with GM metric calipers. Confirm your axle tube outer diameter and rotor size before buying to ensure proper clearance and alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 3\" axle housings (outer diameter)\u003c\/li\u003e\n  \u003cli\u003eWorks with 11.75\" diameter brake rotors\u003c\/li\u003e\n  \u003cli\u003eMade to mount GM metric-caliper styles\u003c\/li\u003e\n  \u003cli\u003eSized for direct-weld attachment — verify caliper bracket offset\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow robust is the construction for track or street use?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is formed from 1\/4\" thick steel for strength at the weld joint and under load. Because it’s a weld-on style, the final strength depends on proper tacking and welding technique, plus any post-weld finishing or reinforcement you add during installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4\" steel plate provides a solid base for brake loads\u003c\/li\u003e\n  \u003cli\u003eNatural unfinished steel allows custom coating or plating\u003c\/li\u003e\n  \u003cli\u003eWeld-on design minimizes movement compared with clamp-style adapters\u003c\/li\u003e\n  \u003cli\u003eInstallation integrity depends on professional welding and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation considerations should I prepare for?\u003c\/h3\u003e\n\u003cp\u003eBecause this is a weld-on component, you’ll need access to welding equipment and the ability to align the bracket precisely to the axle and rotor plane. Clean the axle tube surface, test-fit with the rotor and caliper, and tack-weld before completing full welds to avoid misalignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires welding — grind and degrease mounting surfaces first\u003c\/li\u003e\n  \u003cli\u003eTest-fit with rotor and caliper to confirm offset and clearance\u003c\/li\u003e\n  \u003cli\u003eTack-weld, re-check alignment, then complete the welds\u003c\/li\u003e\n  \u003cli\u003eConsider paint or corrosion protection after welding to prevent rust\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the package include and what measurements matter?\u003c\/h3\u003e\n\u003cp\u003eThe product is supplied one bracket per unit and is intended for rear caliper mounting on the specified axle size. Note the physical package dimensions to plan shipping and storage, and ensure you have the matching calipers and rotors listed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSold individually — one bracket per order\u003c\/li\u003e\n  \u003cli\u003ePackage dimensions approximately 26.9 cm x 19.6 cm x 0.5 cm\u003c\/li\u003e\n  \u003cli\u003eBracket material: 1\/4\" thick steel, natural finish\u003c\/li\u003e\n  \u003cli\u003eEngineered for GM metric calipers and 11.75\" rotors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Allstar Performance ALL42102 is aimed at fabricators, custom car builders, and experienced DIY enthusiasts who need a permanent, reliable brake mounting solution for 3\" axle housings. It’s ideal when matching GM metric calipers with 11.75\" rotors, and for projects where a weld-on attachment is preferred over bolt-on adapters. If you lack welding experience, have a professional installer perform the fitting and welding for safest, longest-lasting results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bracket fit 3-inch axle housings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ALL42102 is designed for 3.00\" diameter axle tubes and pairs with 11.75\" rotors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is welding required to install this caliper bracket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This is a weld-on bracket; professional welding is recommended for proper strength and alignment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67593544630457,"sku":"B003C01BCQ","price":72.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-bracket-front-view.jpg?v=1790576673"},{"product_id":"allstar-performance-carburetor-throttle-return-spring-kit-4-chrome-plated-steel-springs-tempered-tension","title":"Allstar Performance Carburetor Throttle Return Spring Kit — 4 Chrome-Plated Steel Springs, Tempered Tension","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance Carb Mount Return Spring Kit is a four-spring set of chrome-plated steel throttle return springs designed to restore reliable throttle closure on carbureted engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit supplies four steel return springs specifically shaped for carburetor throttle linkages, offering corrosion-resistant chrome plating and vehicle-specific fit options. The springs are sized and tempered for consistent tension to help the throttle snap back to idle, and the lightweight package makes the set easy to carry as a replacement or service part. Originating from the United States, the kit ships in a slim, protective package and is intended for use where a precise return action is needed on classic or performance carb setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these return springs improve throttle response?\u003c\/h3\u003e\n\u003cp\u003eProper return springs ensure the throttle plates close promptly when the accelerator is released, reducing lag and preventing unintended high idle. The steel construction and tempering provide durable, repeatable tension so the linkage returns to idle position consistently over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome-plated steel resists surface corrosion for longer service life.\u003c\/li\u003e\n  \u003cli\u003eTemper and coil count tuned for reliable tension and snap-back.\u003c\/li\u003e\n  \u003cli\u003eFour-spring assortment covers common carb linkage locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my vehicle's carburetor linkage?\u003c\/h3\u003e\n\u003cp\u003eThe kit is labeled vehicle-specific, meaning fit depends on the carburetor model and linkage geometry. Measure the required spring length and hook style against your throttle linkage, or consult your vehicle’s carburetor manual to confirm compatibility before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck free length and end hooks to match your linkage attachment points.\u003c\/li\u003e\n  \u003cli\u003eDesigned for common carb mounts on classic and performance engines.\u003c\/li\u003e\n  \u003cli\u003eLightweight packaging with clear dimensions lets you verify fit quickly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation, and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with throttle linkages: remove the old spring, hook the replacement onto the throttle lever and mounting point, and test the motion. Basic hand tools like pliers and a small screwdriver are usually sufficient, and the chrome finish helps identify proper orientation during fitting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple swap-out—no specialized tools required for most setups.\u003c\/li\u003e\n  \u003cli\u003ePliers recommended to ease spring stretch and hook attachment.\u003c\/li\u003e\n  \u003cli\u003eInspect linkage and bushing wear while replacing springs for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the product's physical specs and origin?\u003c\/h3\u003e\n\u003cp\u003eThe springs arrive in compact packaging measuring approximately 1.524 cm high by 12.953 cm long and 0.254 cm wide, with the kit weighing about 1.0 pound. Manufactured in the United States, the set is sold as a four-piece kit intended for vehicle-specific applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage dimensions: 1.524 H x 12.953 L x 0.254 W cm.\u003c\/li\u003e\n  \u003cli\u003ePackage weight roughly 1.0 lb; four chrome-plated steel springs included.\u003c\/li\u003e\n  \u003cli\u003eOrigin: United States; fit described as vehicle-specific.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Allstar Performance Carb Mount Return Spring Kit is made for mechanics, restorers, and performance enthusiasts working on carbureted engines who need reliable throttle-return tension. It’s ideal for vintage vehicle maintenance, track-day prep, and any application where precise throttle closure matters; buyers should verify spring length and hook type against their carburetor linkage before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many springs are included and what material are they?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit contains four chrome-plated steel return springs, tempered for consistent throttle-return tension.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these springs without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Most installs only require pliers and a small screwdriver to remove and attach the springs safely.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67593639100601,"sku":"B003TPM4LQ","price":55.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-carb-mount-return-springs-front-packaging.jpg?v=1790577328"},{"product_id":"allstar-performance-ford-style-starter-solenoid-black-all76203-high-current-flat-base","title":"Allstar Performance Ford-style Starter Solenoid Black ALL76203 — High-Current, Flat-Base","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance ALL76203 is a black Ford-style starter solenoid built to handle high-torque racing starters while offering an easy-to-mount flat base and provisions for remote switch or timing light connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact solenoid is designed for race and performance vehicles that use Ford-style starting systems. Finished in durable black, the unit simplifies installation with a flat mounting surface and accessible terminals for hooking up remote under-hood starter switches or timing lights. A dedicated wiring kit (Allstar part 76201) is available separately if you prefer a pre-made harness for tidy, reliable connections. The ALL76203 is sold individually and comes with a 90-day limited factory warranty.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this solenoid support high-torque racing starters?\u003c\/h3\u003e\n\u003cp\u003eThe ALL76203 is built to work with starters that demand higher current draw common in performance applications. Its Ford-style configuration ensures proper engagement and consistent operation under repeated heavy loads without excessive heat or voltage drop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord-style contact design optimized for high-current starters\u003c\/li\u003e\n  \u003cli\u003eRobust internal contacts for repeated cranking cycles\u003c\/li\u003e\n  \u003cli\u003eBlack finish for corrosion resistance and a race-ready look\u003c\/li\u003e\n  \u003cli\u003eSuitable for high-torque aftermarket starter units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation straightforward?\u003c\/h3\u003e\n\u003cp\u003eThe solenoid’s flat base helps align and secure the unit against a mounting surface, reducing the need for complex brackets. Terminals are designed for easy hookup, and you can add a remote under-hood starter switch or timing light connection without reworking the entire electrical layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlat base for simple, stable mounting\u003c\/li\u003e\n  \u003cli\u003eClearly positioned power and control terminals for fast wiring\u003c\/li\u003e\n  \u003cli\u003eWorks with an available wiring kit (Allstar 76201) for plug-and-play convenience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about compatibility and fit?\u003c\/h3\u003e\n\u003cp\u003eThis is a vehicle-specific Ford-style solenoid, so confirm that your car or race rig uses the same Ford-style starter configuration before purchasing. The product is sold as a single unit, ideal when replacing a worn solenoid or upgrading to handle a stronger starter motor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord-style form factor—verify fit with your starter system\u003c\/li\u003e\n  \u003cli\u003eSold individually; purchase the number of units needed for your application\u003c\/li\u003e\n  \u003cli\u003eOptional wiring kit available separately for complete installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Owners, builders, and mechanics of performance and race vehicles who use Ford-style starters and need a durable solenoid able to handle high current demands will appreciate the ALL76203. It’s aimed at people replacing worn starter solenoids, upgrading to support high-torque aftermarket starters, or simplifying under-hood controls with remote switch\/timing light hookups. If you want a compact, race-friendly solenoid that’s easy to mount and wire—especially when paired with the Allstar wiring kit—this unit is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this solenoid compatible with high-torque aftermarket starters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this Ford-style solenoid is designed to work with high-torque racing starters and handle increased current draw.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include a wiring harness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No; the wiring kit is sold separately as Allstar part 76201 for a complete installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67593807003833,"sku":"B006K8V96A","price":58.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-black-starter-solenoid-front-view.jpg?v=1790579129"},{"product_id":"allstar-performance-solder-slugs-for-2-gauge-ring-terminals-pack-of-10-pre-measured-fast-melt","title":"Allstar Performance solder slugs for 2-gauge ring terminals, Pack of 10 — pre-measured, fast-melt","description":"\u003cp\u003e\u003cstrong\u003eAllstar Performance ALL76131 solder slugs are pre-measured solder inserts designed to create clean, reliable connections inside 2-gauge ring terminals for battery and power cable installations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese pre-formed solder slugs simplify terminating 2 AWG battery cables by providing the exact solder quantity needed for each connection. Rather than guessing or overheating, installers drop the slug into the terminal barrel, heat until the solder melts and wets the conductor, producing a compact, consistent joint. Each package contains ten slugs sized specifically for 2-gauge terminals, making them a handy supply for small wiring jobs, racecar battery leads, marine battery setups, and maintenance kits.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these solder slugs improve a 2-gauge terminal installation?\u003c\/h3\u003e\n\u003cp\u003eUsing a slug designed to fit the terminal ensures uniform solder distribution and reduces the risk of excess solder spattering or cold joints. The slug melts cleanly and fills the terminal’s barrel around the conductor for better mechanical and electrical contact when done correctly. They remove the need to measure flux and bar solder by hand, speeding up repetitive work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-measured solder prevents waste and inconsistent solder volume\u003c\/li\u003e\n  \u003cli\u003eFits neatly inside the 2-gauge ring terminal barrel for even coverage\u003c\/li\u003e\n  \u003cli\u003eReduces heating time compared with freehand soldering\u003c\/li\u003e\n  \u003cli\u003ePack of 10 supports multiple terminals or spares for future repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the correct technique for using a solder slug in a battery cable terminal?\u003c\/h3\u003e\n\u003cp\u003eStrip the cable to the recommended length, insert the conductor into the ring terminal, add the slug into the terminal barrel, then apply heat until the solder flows and wets the strands. Avoid prolonged heating which can damage insulation; remove the heat once the solder visibly liquefies and draws into the conductor. Allow the joint to cool naturally before moving or insulating the terminal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStrip cable to match terminal barrel depth and insert fully\u003c\/li\u003e\n  \u003cli\u003ePlace slug between conductor and barrel, then heat from the terminal exterior\u003c\/li\u003e\n  \u003cli\u003eWatch for solder flow; stop heating as soon as it melts and saturates\u003c\/li\u003e\n  \u003cli\u003eLet the joint cool undisturbed, then protect with shrink tubing or gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these slugs compatible with my application and safety practices?\u003c\/h3\u003e\n\u003cp\u003eThe slugs are sized for standard 2-gauge ring terminals and intended for battery and heavy-current wiring where soldered joints are acceptable. Use proper ventilation, eye protection, and heat sources rated for electrical soldering; do not rely on solder alone for mechanical strain relief—crimping and proper terminal selection remain important. Follow vehicle or equipment manufacturer guidance on soldered battery connections, especially in high-vibration environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for 2 AWG terminals and like-sized barrels\u003c\/li\u003e\n  \u003cli\u003eIntended for electrical conductivity enhancement, not primary mechanical retention\u003c\/li\u003e\n  \u003cli\u003eWorks with standard soldering torches or irons suitable for heavy-gauge terminals\u003c\/li\u003e\n  \u003cli\u003eSold as a set of 10 slugs for small projects and maintenance kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technicians, racers, marine installers, and DIYers who work with 2-gauge battery or power cables will find these Allstar Performance ALL76131 slugs useful for fast, repeatable solder joints. They’re especially helpful when consistent solder volume and tidy joints matter—such as battery cable replacements, racecar harness builds, or shop maintenance. Keep them in your tool kit for reliable, pre-measured soldering when terminating heavy-gauge conductors.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What gauge terminals do these slugs fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are sized specifically for 2-gauge (2 AWG) ring terminals and barrel depths matched to that conductor size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many slugs are included and are they pre-measured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The pack contains 10 pre-measured solder slugs, each sized to provide the correct solder volume for a single 2-gauge termination.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67593824960697,"sku":"B006K8V6AE","price":58.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-solder-slug-front-view.jpg?v=1790579453"},{"product_id":"allstar-performance-cotton-candy-fuel-fragrance-4-oz-concentrated-clear-blending-scent-additive","title":"Allstar Performance Cotton Candy Fuel Fragrance — 4 oz concentrated, clear-blending scent additive","description":"\u003cb\u003eAllstar Performance Cotton Candy Fuel Fragrance is a concentrated 4 oz scent additive formulated to blend clear into fuels to give race fuel a cotton-candy aroma without affecting visible clarity.\u003c\/b\u003e\n\n\u003cp\u003eThis liquid fragrance is made to mix directly into a variety of race and hobby fuels — including methanol, nitromethane, gasoline, and certain 2-cycle blends — to add a pleasant scent signature to your fuel system. Packaged in a resealable 4 oz bottle, a small dose treats dozens of gallons depending on the fuel type, and the product is designed to dissolve clear so it will not cloud the fuel or leave visible residue.\u003c\/p\u003e\n\n\u003ch3\u003eHow much fuel does one bottle treat?\u003c\/h3\u003e\n\u003cp\u003eA single 4 oz bottle is concentrated for economy and convenience: it stretches across many tanks depending on whether you treat alcohol-based fuels or gasoline. Follow the manufacturer’s dosing guidance for accurate coverage and consistent scent strength.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTreats approximately 30–55 gallons of alcohol-based fuels (methanol or similar).\u003c\/li\u003e\n  \u003cli\u003eSuitable for about 20 gallons of gasoline per bottle.\u003c\/li\u003e\n  \u003cli\u003eUse smaller amounts for spot-treating tanks or storage containers to maintain scent intensity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the fragrance mix clearly and affect engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe formula is intended to dissolve cleanly into fuel so it remains visually clear in the tank; it is not designed to change combustion characteristics. As with any additive, measure and test in controlled conditions if you run tuned engines or race-critical setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlends clear with fuel — no visible haze when dosed correctly.\u003c\/li\u003e\n  \u003cli\u003eCompatible with methanol, nitromethane, gasoline, and some 2-cycle mixtures.\u003c\/li\u003e\n  \u003cli\u003eRecommended to test small amounts first in modified or high-performance engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use it safely and store the bottle?\u003c\/h3\u003e\n\u003cp\u003eHandle like any fuel additive: keep away from open flames and heat sources, measure with care, and reseal the bottle after use to preserve scent and prevent spills. Store in a cool, ventilated area out of direct sunlight and away from children or pets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse calibrated measuring tools to add the correct dose to each tank.\u003c\/li\u003e\n  \u003cli\u003eResealable 4 oz bottle helps prevent spills and evaporation between uses.\u003c\/li\u003e\n  \u003cli\u003eKeep in a cool, dry place and away from ignition sources.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this in 2-cycle fuel or on tuned race setups?\u003c\/h3\u003e\n\u003cp\u003eThe fragrance can be incorporated into many 2-cycle mixtures and is compatible with common fuels used in hobby and racing contexts; however, for engines with precise tuning or championship-level racing, test performance impact before competition use. Avoid over-dosing and follow your engine builder’s recommendations when in doubt.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks in 2-cycle blends when mixed at appropriate ratios.\u003c\/li\u003e\n  \u003cli\u003eTest a small batch before widespread use in finely tuned engines.\u003c\/li\u003e\n  \u003cli\u003eDo not exceed recommended dosages to prevent unintended effects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Allstar Performance Cotton Candy Fuel Fragrance is aimed at hobbyists, track crews, event organizers, and hobby racers who want an enjoyable scent signature on fuel without changing its appearance. It’s useful for promotional events, pit areas, and enthusiasts who prefer a pleasant aroma around their equipment but still require a product that mixes clear and stores conveniently in a small resealable bottle. If you need a cost-effective way to scent multiple fuel tanks or want a unique sensory detail for your racing setup, this concentrated 4 oz bottle is designed for easy dosing and broad compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much fuel does one 4 oz bottle treat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One bottle treats about 30–55 gallons of alcohol-based fuel or roughly 20 gallons of gasoline, depending on dosing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it change fuel color or damage engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The fragrance mixes clear and is not intended to alter fuel color; test small amounts if you have finely tuned engines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Allstar Performance","offers":[{"title":"Default Title","offer_id":67593910616249,"sku":"B007ZQS4LE","price":52.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/allstar-performance-cotton-candy-front-packaging.jpg?v=1790580550"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/allstar-performance-cotton-candy-front-packaging.jpg?v=1790612703","url":"https:\/\/redleafauto.ca\/collections\/allstar-performance.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}