{"title":"Antifreeze \u0026 Coolant","description":"\u003cp\u003eAntifreeze and coolant. Check the freeze-protection rating before the first hard frost.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"vp-racing-stay-frosty-race-ready-coolant-1-gallon-4-pack-ready-to-use-glycol-free-high-heat-protection","title":"VP Racing Stay Frosty Race-Ready Coolant 1 Gallon (4 Pack) — Ready-to-Use, Glycol-Free High-Heat Protection","description":"\u003cp\u003e\u003cstrong\u003eVP Racing Fuels Stay Frosty Race-Ready Coolant is a ready-to-use, water-based racing coolant formulated to lower engine temperatures, protect aluminum components, and support higher power outputs without glycol.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for high-compression, high-heat racing engines, this Stay Frosty Race-Ready coolant is a straight-from-the-bottle solution that combines chemically stable reverse-osmosis water with performance additives to improve heat transfer and system protection. It’s biodegradable, non-toxic, and formulated to meet ASTM D3306 corrosion standards, making it suitable for modern racing radiators and aluminum alloy components where reliable cooling and corrosion resistance matter most.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant help control high engine temperatures?\u003c\/h3\u003e\n\u003cp\u003eStay Frosty improves heat rejection compared with conventional glycol-based coolants, helping reduce operating temperatures under heavy load. The formula increases the coolant’s ability to carry heat away from hot cylinder heads so ignition timing can be advanced safely where appropriate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to lower engine temperature by up to 30°F versus traditional glycol coolants\u003c\/li\u003e\n  \u003cli\u003eContains specialized heat-transfer agents to speed heat movement from combustion areas\u003c\/li\u003e\n  \u003cli\u003eIncreases air\/fuel charge density for better performance potential\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it easy to use and compatible with race cars?\u003c\/h3\u003e\n\u003cp\u003eThis product is pre-mixed and ready to pour—no dilution or mixing needed—so it’s track-ready with no extra preparation steps. Because it’s 100% water-based and made with reverse-osmosis water, it minimizes contaminants and is gentle on cooling-system metals while meeting common industry corrosion standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReady-to-use straight from the container—no additives required\u003c\/li\u003e\n  \u003cli\u003eBiodegradable, glycol-free, and non-toxic for simpler handling\u003c\/li\u003e\n  \u003cli\u003eFormulated to protect aluminum and other metals from corrosion and electrolysis\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill using this coolant affect power and engine safety?\u003c\/h3\u003e\n\u003cp\u003eBy enhancing cooling efficiency and reducing detonation risk, Stay Frosty can enable more aggressive ignition timing and improve horsepower and torque potential in tuned racing engines. It relies on purified water and stable additives to avoid introducing dissolved contaminants that reduce performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReverse-osmosis water rejects heavy metals and dissolved organics\u003c\/li\u003e\n  \u003cli\u003eNon-toxic formula helps maximize power without glycol-related drawbacks\u003c\/li\u003e\n  \u003cli\u003eProtects vital components while supporting performance tuning strategies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it protect radiator systems and internal metals?\u003c\/h3\u003e\n\u003cp\u003eThe coolant includes corrosion inhibitors and lubricants that guard mixed-metal systems, including sensitive aluminum alloys commonly used in race radiators and cylinder heads. It meets ASTM D3306 corrosion criteria and is formulated to reduce electrolysis and metal wear over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLubricates and protects metals from corrosion and electrolysis\u003c\/li\u003e\n  \u003cli\u003eSafe for all radiator types and mixed-metal cooling systems\u003c\/li\u003e\n  \u003cli\u003eMeets ASTM D3306 for corrosion protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VP Racing Fuels Stay Frosty Race-Ready Coolant is aimed at racers, performance builders, and track-day enthusiasts running high-compression or heavily tuned engines who need a dependable, ready-to-use coolant that improves heat transfer and protects modern aluminum components. It’s a practical choice for teams and drivers who prefer a biodegradable, non-glycol option that simplifies pit-side servicing while supporting higher-performance engine setups.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to dilute VP Racing Stay Frosty before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This formula is ready-to-use straight from the container—no dilution or additives required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this coolant safe for aluminum radiators and heads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It contains inhibitors that protect aluminum and mixed-metal systems and meets ASTM D3306 corrosion standards.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VP Racing","offers":[{"title":"Default Title","offer_id":67584940048569,"sku":"B0C9SBV57Z","price":364.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vp-racing-stay-frosty-front-packaging.jpg?v=1790460001"},{"product_id":"evans-waterless-engine-coolant-ec53001-pack-of-2-high-boiling-375-f-corrosion-preventing-formula","title":"EVANS waterless engine coolant EC53001 Pack of 2 — high-boiling 375°F, corrosion‑preventing formula","description":"\u003cp\u003e\u003cstrong\u003eEVANS Coolant EC53001 is a waterless, high-boiling engine coolant formulated to eliminate boilover, reduce corrosion, and protect modern and classic gasoline and light-duty diesel engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for motorists, restorers, and fleet managers who want longer-lasting engine protection without the risks of water-based coolants, this pack of two EC53001 bottles swaps out traditional antifreeze mixes for a stable, water-free solution. It raises the effective boiling point, cuts vapor pressure, and removes the common failure modes tied to water in cooling systems. Before installation, all traces of conventional water-based coolant must be flushed from the system for best results.\u003c\/p\u003e\n\n\u003ch3\u003eHow does EVANS waterless coolant prevent boilover and what difference will I notice?\u003c\/h3\u003e\n\u003cp\u003eBecause EC53001 contains no water, its boiling point is dramatically higher than typical antifreeze-water blends, which means it resists vaporization under high operating temperatures. Drivers should see fewer overheating events related to coolant vapor and less bubbling or “after-boil” in the expansion tank.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBoiling point: 375°F reduces the chance of vapor formation.\u003c\/li\u003e\n  \u003cli\u003eLower vapor pressure prevents coolant loss through overflow.\u003c\/li\u003e\n  \u003cli\u003eStable performance under sustained high loads and towing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill switching to EVANS coolant reduce corrosion and cavitation damage?\u003c\/h3\u003e\n\u003cp\u003eYes — by removing water, EC53001 eliminates the electrolytic environment that accelerates corrosion and liner or water-pump cavitation erosion. That leads to fewer coolant-related failures and can extend the service life of pumps, gaskets, and metal surfaces inside the cooling system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo free water to cause electrolysis or galvanic corrosion.\u003c\/li\u003e\n  \u003cli\u003ePrevents cavitation erosion on water pumps and liners.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain component integrity over longer service intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and engines are compatible with EC53001?\u003c\/h3\u003e\n\u003cp\u003eEVANS EC53001 is formulated primarily for gasoline-powered vehicles, including modern, classic, and vintage cars, and it also suits light-duty diesel engines as well as LP and CNG-fueled vehicles. Always verify compatibility with your engine manufacturer and ensure a full system flush of water-based coolant before conversion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable: modern, classic, and vintage gasoline engines.\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for light-duty Diesels, LP, and CNG vehicles.\u003c\/li\u003e\n  \u003cli\u003eNot a drop-in — complete removal of prior water-based coolant is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is installation different from conventional antifreeze?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires a thorough purge of any water-based coolant and residual water from the system because EC53001 is designed to work without water present. Professional conversion kits or a trained technician are recommended to ensure the system is fully flushed and correctly filled to manufacturer-recommended levels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlush and remove all existing water-based coolant and water.\u003c\/li\u003e\n  \u003cli\u003eFollow EVANS conversion procedures or use a conversion kit.\u003c\/li\u003e\n  \u003cli\u003eTop up and bleed the system per instructions to avoid air pockets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: EVANS Coolant EC53001 (Pack of 2) is aimed at car enthusiasts, vintage-vehicle restorers, fleet operators, and anyone seeking a durable alternative to traditional water-based coolants. It’s particularly useful for vehicles that run hot, tow frequently, or are subject to severe operating conditions, provided the cooling system is prepared correctly for a waterless conversion.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix EVANS EC53001 with standard antifreeze?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. EC53001 is waterless and must not be mixed with water-based antifreeze; fully drain and flush the old coolant before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is EC53001 suitable for diesel or LPG engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is compatible with light-duty diesels, LP and CNG vehicles, and most gasoline engines when converted properly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVANS","offers":[{"title":"Default Title","offer_id":67584988577977,"sku":"B06VY4S9FH","price":250.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evans-ec53001-front-label.jpg?v=1790462416"},{"product_id":"camco-gravity-flow-boat-winterizing-kit-diy-engine-flush-system-5-gal-tank-reinforced-hose","title":"Camco Gravity-Flow Boat Winterizing Kit - DIY Engine Flush System, 5 gal Tank \u0026 Reinforced Hose","description":"\u003cp\u003e\u003cstrong\u003eCamco's DIY Boat Winterizing Kit (Gravity Flow Engine Flush System 65501) is a portable, gravity-fed setup that circulates antifreeze through inboard and outboard engines to prepare them for winter storage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for boat owners who want a straightforward winterizing method, this kit brings together a molded antifreeze tank, control valves, a winterizing tee and a reinforced clear hose with brass fittings. It uses gravity rather than a pump to move antifreeze, so setup is simple and reliable: place the tank above the engine’s intake line, open the valves and let the system flush and protect internal cooling passages. The kit is built to minimize fuss, reduce waste and use as little as five gallons of marine antifreeze (flusher not included), so you can finish winter prep faster and with fewer trips to the marina.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the gravity flow system protect my engine?\u003c\/h3\u003e\n\u003cp\u003eThe kit circulates antifreeze through the engine’s cooling passages so residual water is displaced and corrosion risk is reduced during storage. Because the flow is gravity-driven, it maintains a steady, controlled circulation without relying on electrical pumps that can fail or add complexity. The clear hose and brass fittings give a reliable path for antifreeze while minimizing kinks and leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePushes antifreeze through engine cooling jackets and manifolds\u003c\/li\u003e\n  \u003cli\u003eClear hose lets you confirm flow and color of antifreeze\u003c\/li\u003e\n  \u003cli\u003eReinforced hose improves kink resistance for consistent flow\u003c\/li\u003e\n  \u003cli\u003eBrass fittings offer corrosion resistance and tight seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with both inboard and outboard engines?\u003c\/h3\u003e\n\u003cp\u003eYes — the Camco kit is compatible with common inboard and outboard winterizing procedures. The winterizing tee and included valves make it easy to connect to most engine flusher setups or direct intake connections. Follow your engine builder’s winterizing instructions for the correct port and antifreeze type.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes winterizing tee to adapt to different engine fittings\u003c\/li\u003e\n  \u003cli\u003eSuitable for both inboard and outboard cooling systems\u003c\/li\u003e\n  \u003cli\u003eRequires about five gallons of marine antifreeze for typical jobs\u003c\/li\u003e\n  \u003cli\u003eWorks with your existing flusher or intake connection (flusher not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components come in the kit and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles the essential parts you need to complete a winterizing flush without improvising with mismatched parts. A dedicated antifreeze tank with an on\/off valve gives you safe storage and controlled delivery; the ball valve and winterizing tee let you redirect flow precisely, and the reinforced clear hose with brass fittings ensures durable, visible antifreeze flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAntifreeze tank with on\/off valve for controlled dispensing\u003c\/li\u003e\n  \u003cli\u003eBall valve to stop and start flow without disconnecting hoses\u003c\/li\u003e\n  \u003cli\u003eWinterizing tee to split or adapt flow to engine ports\u003c\/li\u003e\n  \u003cli\u003eReinforced 5\/8\" clear hose with brass fittings for reliable delivery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is setup and cleanup?\u003c\/h3\u003e\n\u003cp\u003eSetup is intentionally low-tech: mount the antifreeze tank higher than the engine intake, attach the clear hose and valves, and open the tank valve. No electricity or pump means fewer failure points and easier storage after use. Cleanup is minimal — close the valves, drain remaining antifreeze back into the tank or dispose according to local regulations, and coil the hose for storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGravity-fed—no pump or power source required\u003c\/li\u003e\n  \u003cli\u003eClear hose allows visual confirmation of antifreeze flow\u003c\/li\u003e\n  \u003cli\u003eValves make draining and storing components straightforward\u003c\/li\u003e\n  \u003cli\u003eCompact parts fit easily in winter toolboxes or boat lockers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Camco DIY Boat Winterizing Kit is for recreational boat owners, DIY-minded anglers and small-fleet managers who prefer a dependable, low-complexity winterizing process. If you want a portable kit that works with common inboard and outboard engines, reduces the chance of missed cooling passages and avoids reliance on pumps or marina services, this kit gives a practical, cost-conscious approach to seasonal engine care.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much antifreeze do I need for this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most jobs use about five gallons of marine-grade antifreeze; exact needs depend on engine size and cooling system volume.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit require an electric pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The gravity flow system operates without electricity—place the tank above the intake and open the valves to run antifreeze.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Camco","offers":[{"title":"Default Title","offer_id":67585669923001,"sku":"B0000AXQU2","price":148.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/camco-diy-winterizing-kit-front-packaging.jpg?v=1790475041"},{"product_id":"star-brite-premium-propylene-glycol-boiler-antifreeze-1-gal-100-f-protection-corrosion-inhibitors","title":"STAR BRITE Premium Propylene Glycol Boiler Antifreeze 1 Gal — -100°F Protection, Corrosion Inhibitors","description":"\u003cstrong\u003eSTAR BRITE Premium -100° Boiler System Antifreeze is a propylene-glycol heating and cooling fluid formulated with corrosion inhibitors to protect boilers, hydronic heaters, and related closed-loop systems down to -100°F when used full strength.\u003c\/strong\u003e\n\n\u003cp\u003eThis one-gallon, ready-to-use fluid is manufactured in the USA and designed for safe handling and reduced environmental impact compared with some alternatives. It uses propylene glycol—recognized as GRAS by the FDA in appropriate applications—and includes premium corrosion inhibitors and ethanol-free formulation for longer component life and dependable heat transfer performance. The product may require dilution with distilled or deionized water depending on your system and desired freeze protection; always follow your system manufacturer's directions and verify concentration with a calibrated refractometer.\u003c\/p\u003e\n\n\u003ch3\u003eHow does STAR BRITE antifreeze protect my boiler and heating system?\u003c\/h3\u003e\n\u003cp\u003eThe formula combines propylene glycol with corrosion-inhibiting additives to guard metal surfaces, pumps, valves, and heat exchangers from degradation. It also maintains effective heat transfer properties essential for hydronic systems and specialty heaters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium corrosion inhibitors to reduce rust and scale formation\u003c\/li\u003e\n  \u003cli\u003eMaintains thermal transfer for efficient operation\u003c\/li\u003e\n  \u003cli\u003eEthanol-free to avoid alcohol-related seal and component stress\u003c\/li\u003e\n  \u003cli\u003eSuitable for traditional, closed-loop, and solar boiler systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat freeze protection and performance can I expect?\u003c\/h3\u003e\n\u003cp\u003eAt full strength this product delivers burst protection down to -100°F (-73°C); diluted mixtures will provide proportionally less freeze protection. For accurate protection levels, mix to manufacturer-recommended ratios and confirm concentration with a propylene-glycol refractometer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-strength protection rated to -100°F (-73°C)\u003c\/li\u003e\n  \u003cli\u003eDilutable to target temperature based on your system needs\u003c\/li\u003e\n  \u003cli\u003eUse distilled or deionized water for dilution to avoid mineral deposits\u003c\/li\u003e\n  \u003cli\u003eCheck mixture with a calibrated PG coolant\/antifreeze refractometer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this safe for use around food-contact situations or accidental spills?\u003c\/h3\u003e\n\u003cp\u003ePropylene glycol is listed as Generally Recognized As Safe (GRAS) by the FDA for certain direct and indirect food-contact uses, making STAR BRITE a preferable option where spills or indirect food contact are a concern. That said, you should still follow local regulations for cleanup and disposal and avoid intentional use in potable water systems unless approved by the equipment manufacturer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGRAS-designated propylene glycol for safer incidental exposure\u003c\/li\u003e\n  \u003cli\u003eEnvironmentally better option compared with some glycols\u003c\/li\u003e\n  \u003cli\u003eFollow local spill-response and disposal rules\u003c\/li\u003e\n  \u003cli\u003eNot intended as a potable water additive unless specified\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare and use the product in my system?\u003c\/h3\u003e\n\u003cp\u003eConfirm your manufacturer's instructions before adding antifreeze. This product is not a concentrate and may require dilution with distilled or deionized water depending on the desired freeze point; always verify final PG percentage with a refractometer to ensure proper protection and system compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRead and follow equipment manufacturer directions first\u003c\/li\u003e\n  \u003cli\u003eDilute with distilled or deionized water if needed\u003c\/li\u003e\n  \u003cli\u003eMeasure final concentration with a calibrated refractometer\u003c\/li\u003e\n  \u003cli\u003eFlush and treat systems per recommended procedures before filling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? STAR BRITE Premium -100° Boiler System Antifreeze is aimed at technicians, RV and marine owners, and facilities managers who need reliable freeze protection and corrosion control in hydronic systems, Aqua-Hot and Hydro-Hot units, closed boilers, and solar thermal loops. It suits buyers seeking a U.S.-made, ethanol-free propylene glycol solution that balances safety, performance, and environmental considerations—when used according to equipment guidelines and dilution instructions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to dilute this antifreeze before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It may require dilution; follow your system manufacturer's guidance and confirm concentration with a propylene glycol refractometer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is STAR BRITE antifreeze safe for incidental food-contact areas?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses GRAS-designated propylene glycol, making it a safer choice for potential incidental exposure, but follow cleanup and local regulations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"STAR BRITE","offers":[{"title":"Default Title","offer_id":67585885307065,"sku":"B08RQGF4RX","price":135.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/star-brite-front-label-gallon.jpg?v=1790479239"},{"product_id":"evans-waterless-engine-coolant-128-fl-oz-high-boiling-point-corrosion-protection","title":"EVANS Waterless Engine Coolant 128 fl. oz. — High Boiling Point, Corrosion Protection","description":"\u003cp\u003e\u003cstrong\u003eEVANS EC53001 is a 128 fl. oz. waterless engine coolant engineered to stop boilover, prevent corrosion, and protect engines without using water.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis product page explains what makes EVANS EC53001 different from traditional water-based coolants, how to install it, and which vehicles benefit most. The formula was created for modern and vintage gasoline engines, light-duty diesels, and alternative-fuel vehicles (LP and CNG). Because it contains no water, it raises the coolant boiling point, lowers vapor pressure, and reduces common cooling-system wear modes that come from water-based mixes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does EVANS EC53001 prevent boilover and overheating?\u003c\/h3\u003e\n\u003cp\u003eBy replacing water with a specialized, high-boiling fluid, EC53001 dramatically raises the system’s boiling point and eliminates vapor formation that causes boilover. Lower vapor pressure means the coolant stays in liquid form under higher temperatures, preventing after-boil events and unstable temperature spikes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBoiling point around 375°F to resist vaporization under heavy load\u003c\/li\u003e\n  \u003cli\u003eReduced vapor pressure to keep cooling circuits full and stable\u003c\/li\u003e\n  \u003cli\u003eStops boilover events that can cause localized overheating and pre-ignition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this waterless coolant protect my engine components and metal surfaces?\u003c\/h3\u003e\n\u003cp\u003eYes—because EC53001 contains no water, it removes the primary source of corrosion and cavitation erosion in cooling systems. The formula minimizes electrolysis and prevents liner and water-pump damage typical of water-based coolants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates water-related corrosion and reduces maintenance needs\u003c\/li\u003e\n  \u003cli\u003ePrevents water pump cavitation and cylinder liner erosion\u003c\/li\u003e\n  \u003cli\u003eReduces the risk of electrolysis-induced component failure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation differ from traditional antifreeze?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires a complete purge of all water-based coolant and residual water before filling with EC53001. Because even small amounts of water lower the boiling point, following proper flushing and drying steps is essential for full performance and longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlush system thoroughly to remove prior coolant and water\u003c\/li\u003e\n  \u003cli\u003eDry or cycle the system to eliminate trapped moisture before fill\u003c\/li\u003e\n  \u003cli\u003eFill and bleed according to EVANS instructions for optimal results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect after switching?\u003c\/h3\u003e\n\u003cp\u003eSwitching to EC53001 helps stabilize combustion by preventing overheating-related pre-ignition and knock, which can improve power delivery and efficiency. The reduced coolant loss and lower stress on components also mean fewer repairs and a longer-lasting cooling system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved combustion stability—reduces knock from hot spots\u003c\/li\u003e\n  \u003cli\u003ePotential for better fuel economy due to more consistent engine temps\u003c\/li\u003e\n  \u003cli\u003eLower long-term maintenance costs from less corrosion and component wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: EVANS EC53001 is aimed at car owners, restorers, fleet managers, and performance enthusiasts who need reliable, high-temperature protection without the drawbacks of water-based coolants. It fits modern daily drivers, classic and vintage gasoline engines, light-duty diesels, and LP\/CNG-powered vehicles. If you want to eliminate boilover, reduce corrosion, and extend cooling-system life, this waterless coolant is engineered for those goals.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix EVANS EC53001 with regular coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. EC53001 must replace all water-based coolant and water; mixing lowers its boiling point and negates benefits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is EVANS EC53001 suitable for diesel and alternative-fuel vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s formulated for modern and vintage gasoline engines, light-duty diesels, LP, and CNG vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVANS","offers":[{"title":"Default Title","offer_id":67585908179129,"sku":"B00TPVI2TQ","price":144.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evans-ec53001-front-bottle.jpg?v=1790479763"},{"product_id":"phoenix-systems-coolant-test-strips-8001-b-100-test-strips-ph-glycol-rapid-read","title":"Phoenix Systems Coolant Test Strips 8001-B — 100 Test Strips, pH \u0026 Glycol % Rapid Read","description":"\u003cp\u003e\u003cstrong\u003ePhoenix Systems 8001-B Coolant Test Strips let you quickly determine engine coolant pH and glycol percentage with 100 sealed, ready-to-use strips for reliable on-vehicle testing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep cooling systems running the way they should by checking coolant condition regularly. These test strips measure both pH and glycol concentration so you can see when diluted coolant no longer meets protection standards. Each bottle contains 100 strips stored in an aluminum container with a molecular sieve in the lid, preserving freshness and accuracy so readings reflect the sample you pull from the radiator or overflow tank.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these test strips work and how fast are results?\u003c\/h3\u003e\n\u003cp\u003eThe Phoenix Systems 8001-B strips use colorimetric indicators that change shade based on pH and ethylene\/glycol concentration. Dip the strip into coolant that is diluted as it sits in the vehicle (typically 50\/50), wait 60 seconds, then compare the colors to the included chart for an immediate, visual readout. Results show whether coolant chemistry still offers corrosion protection and freeze\/boil performance for your application.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e60-second visual reaction time for quick decision-making\u003c\/li\u003e\n  \u003cli\u003eDual measurement: pH indicator plus glycol percentage\u003c\/li\u003e\n  \u003cli\u003eMatch colors to the printed chart—no tools required\u003c\/li\u003e\n  \u003cli\u003eDesigned for on-vehicle samples (test diluted coolant as found in system)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich coolant types and vehicle systems are compatible?\u003c\/h3\u003e\n\u003cp\u003eThese strips are formulated to work with a wide range of engine coolants, including conventional, long-life, extended-life, Dex-Cool, and low-tox formulations, regardless of the dye color. They provide a versatile solution for passenger cars, light trucks, and many fleet vehicles, giving technicians and DIYers a single test method for mixed coolant environments. Always sample the coolant as it exists in the system rather than testing undiluted concentrate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with all common coolant chemistries and colors\u003c\/li\u003e\n  \u003cli\u003eUseful for mixed-fleet maintenance and individual owners\u003c\/li\u003e\n  \u003cli\u003eWorks for both conventional and extended-life formulas\u003c\/li\u003e\n  \u003cli\u003eNot intended for testing undiluted concentrate—dilute 50\/50 as installed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the container and strips reliable over time?\u003c\/h3\u003e\n\u003cp\u003eEach set of 100 strips ships sealed inside an aluminum bottle fitted with a molecular sieve in the cap to absorb moisture and protect the reagent pads. That packaging preserves reagent stability so each strip delivers consistent readings even after storage. The durable container is convenient for shop benches, parts bins, or in-vehicle tool kits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum container inhibits light and moisture penetration\u003c\/li\u003e\n  \u003cli\u003eMolecular sieve in lid extends shelf life of the reagent pads\u003c\/li\u003e\n  \u003cli\u003e100 strips per bottle for multiple checks or fleet use\u003c\/li\u003e\n  \u003cli\u003eCompact packaging fits in most toolboxes and service bays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I interpret results and act on them?\u003c\/h3\u003e\n\u003cp\u003eCompare the strip colors to the supplied reference chart to read pH and glycol percentage. Low pH or low glycol readings indicate reduced corrosion protection or freeze\/boil performance, suggesting a service or coolant change may be warranted. Use the readings as objective evidence when planning coolant flushes, refills, or system inspections—but always follow vehicle manufacturer maintenance recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow pH suggests acidification and potential corrosion risk\u003c\/li\u003e\n  \u003cli\u003eLow glycol percentage means diminished freeze\/boil protection\u003c\/li\u003e\n  \u003cli\u003eUse results to justify preventive service and maintain warranties\u003c\/li\u003e\n  \u003cli\u003eFollow OEM guidance for intervals and approved coolant types\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Phoenix Systems 8001-B Coolant Test Strips are aimed at automotive technicians, fleet managers, and DIY car owners who want fast, repeatable evidence of coolant condition. If you need a simple, visual method to check on pH and glycol levels without lab equipment, these strips give clear, actionable data and enough tests for ongoing maintenance. Remember to sample coolant as it exists in the system (typically a 50\/50 mix) and avoid testing undiluted concentrate.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I test coolant directly from the radiator cap?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only when the engine is cool—sample from the overflow or open radiator carefully and use the coolant as it exists in the system (usually 50\/50).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these strips suitable for Dex-Cool and extended-life coolants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the strips are compatible with Dex-Cool, conventional, long-life, and low-tox coolants across different dye colors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Phoenix Systems","offers":[{"title":"Default Title","offer_id":67585915945145,"sku":"B01CNHJ4QI","price":108.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/phoenix-systems-8001-b-front-packaging.jpg?v=1790479861"},{"product_id":"engine-ice-off-road-motorcycle-coolant-antifreeze-2-pack-1-2-gal-blue-premixed-low-temp-protection","title":"Engine Ice Off-Road Motorcycle Coolant \u0026 Antifreeze, 2-Pack 1\/2‑Gal Blue — Premixed, Low-Temp Protection","description":"\u003cp\u003e\u003cstrong\u003eEngine Ice Off-Road Hi-Performance Motorcycle Coolant \u0026amp; Antifreeze is a ready-to-use, blue premixed coolant designed to lower engine temperatures, resist boil-over and protect against freezing for powersports and off-road motorcycles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngine Ice is engineered by a specialist R\u0026amp;D team and manufactured under full quality control to deliver a premium cooling solution for high-performance motorcycles and powersports machines. This two-pack of 1\/2-gallon bottles arrives pre-diluted with deionized water, so it's ready for a straightforward drain-and-fill without measuring or mixing. The formulation uses propylene glycol and OAT (organic acid technology) inhibitors, is phosphate-free, and is optimized to reduce operating temperatures compared with conventional coolants.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant improve performance under demanding conditions?\u003c\/h3\u003e\n\u003cp\u003eThe Engine Ice formula focuses on heat dispersion to keep engines running closer to ideal operating temperatures, which helps sustain power output during extended or intense riding. Independent lab testing and rider feedback highlight measurable reductions in thermostat-regulated temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical reduction in operating temperatures: 10–20°F versus standard coolants.\u003c\/li\u003e\n  \u003cli\u003ePremixed deionized water for consistent thermal conductivity out of the bottle.\u003c\/li\u003e\n  \u003cli\u003eOAT chemistry and propylene glycol for stable inhibitor life in powersports engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does it offer against boiling and freezing?\u003c\/h3\u003e\n\u003cp\u003eEngine Ice is formulated to resist boil-over under heavier loads and to provide freeze protection in cold storage or winter use. Because it comes prediluted and balanced, the product protects without additional antifreeze mixing steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBoil-over resistance up to approximately 256°F when used as directed.\u003c\/li\u003e\n  \u003cli\u003eFreeze protection down to around -7°F in the shipped premix concentration.\u003c\/li\u003e\n  \u003cli\u003ePre-diluted for reliable protection right out of the bottle—no measuring needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this coolant safe and easy to install for routine maintenance?\u003c\/h3\u003e\n\u003cp\u003eYes. The bottles are sized for easy handling during routine coolant changes and are formulated to be user-friendly. The premixed product eliminates the need to calculate dilution ratios, reducing the risk of incorrect mixing during service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAvailable in convenient 1\/2-gallon bottles for simple pour-and-fill service.\u003c\/li\u003e\n  \u003cli\u003ePhosphate-free and free of ethylene glycol; uses propylene glycol instead.\u003c\/li\u003e\n  \u003cli\u003eDesigned for straightforward head dispersion and compatibility with typical motorcycle cooling systems—follow vehicle maker instructions for change intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this coolant work across different terrains and machine types?\u003c\/h3\u003e\n\u003cp\u003eEngine Ice is formulated for powersports applications, including off-road motorcycles, ATVs, and other high-performance machines that face varied loads and ambient temperatures. Its heat-control focus helps maintain consistent performance across diverse riding environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for powersports use—suitable for off-road and high-load conditions.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain thermal stability during aggressive riding and long runs.\u003c\/li\u003e\n  \u003cli\u003eRecommended where manufacturers allow propylene-glycol OAT coolants—consult your service manual for compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders, mechanics, and enthusiasts who demand reliable thermal control for high-performance motorcycles and powersports machines will benefit from Engine Ice Off-Road Hi-Performance Motorcycle Coolant. If you want a premixed, easy-to-use coolant that focuses on lowering operating temperature, resisting boil-over, and providing winter protection without extra mixing, this 2-pack provides a convenient supply for one or two coolant services depending on system capacity. Always follow your vehicle manufacturer's maintenance schedule and compatibility guidelines when selecting any coolant.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Engine Ice premixed or do I need to dilute it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Engine Ice comes premixed with deionized water, ready to use—no dilution required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this coolant protect my motorcycle in cold weather?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the premixed formulation provides freeze protection down to about -7°F when used as supplied.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Engine Ice","offers":[{"title":"Default Title","offer_id":67586471133369,"sku":"B0C9NNMYLH","price":156.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/engine-ice-off-road-front-packaging.jpg?v=1790484254"},{"product_id":"cyclemax-pre-mixed-antifreeze-coolant-4-quart-pack-for-yamaha-vehicles-60-40-ready-to-use-with-funnel","title":"CYCLEMAX Pre-Mixed Antifreeze Coolant 4-Quart Pack for Yamaha Vehicles — 60\/40 Ready-to-Use with Funnel","description":"\u003cp\u003e\u003cstrong\u003eCYCLEMAX Four Pack compatible with Yamaha Yamalube Pre-Diluted Antifreeze provides four ready-to-use quarts and a disposable funnel to refill cooling systems quickly and correctly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis CYCLEMAX bundle is built for owners of Yamaha ATVs, UTVs, SXS, scooters, motorcycles and dirt bikes who want a straightforward, pre-mixed cooling solution. Formulated to match the vehicle manufacturer’s recommendations, the product arrives ready to pour without measuring, saving time and reducing the risk of incorrect dilution. For safety, the formula contains a bittering agent and 55–65% ethylene glycol by weight.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pack simplify routine coolant maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe four-quart set lets you handle full-system refills or multiple top-ups without repeated shopping trips. Each quart is pre-diluted to a 60\/40 coolant-to-water ratio so you can pour straight into the cooling system with the included disposable funnel. This reduces spills and helps ensure consistent protection across services.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour pre-mixed quarts ready to use—no measuring required\u003c\/li\u003e\n  \u003cli\u003eIncluded disposable funnel for neat, fast filling\u003c\/li\u003e\n  \u003cli\u003ePre-blended 60\/40 coolant\/water mix for manufacturer compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this compatible with my Yamaha vehicle?\u003c\/h3\u003e\n\u003cp\u003eYes—this product is sold as compatible with Yamaha Yamalube pre-diluted antifreeze ACC-YAMAC-BL-32 and is formulated to meet similar specifications for engines that call for a pre-mixed ethylene glycol coolant. Always confirm your owner’s manual recommendations and coolant type before topping up or replacing the system fluid.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to be used where Yamaha pre-diluted antifreeze is specified\u003c\/li\u003e\n  \u003cli\u003eSuitable for many Yamaha ATVs, UTVs, scooters, motorcycles and dirt bikes\u003c\/li\u003e\n  \u003cli\u003eCheck owner’s manual for model-specific guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and composition information should I know?\u003c\/h3\u003e\n\u003cp\u003eThe antifreeze contains 55–65% ethylene glycol by weight and a bittering agent to deter accidental ingestion. Handle with gloves, avoid skin and eye contact, and follow local disposal regulations for used coolant. Store away from children and pets and in its original, labeled container.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eActive ingredient range: 55–65% ethylene glycol by weight\u003c\/li\u003e\n  \u003cli\u003eIncludes a bittering agent for safety purposes\u003c\/li\u003e\n  \u003cli\u003eFollow standard precautions: gloves, eye protection, proper disposal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use this product for best results?\u003c\/h3\u003e\n\u003cp\u003ePark the vehicle on level ground, let the engine cool, then drain the old coolant per the service manual and refill with the pre-diluted fluid. The included funnel helps avoid contamination and spills. After filling, run the engine briefly and recheck the level when the system reaches operating temperature.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCool engine before opening the cooling system\u003c\/li\u003e\n  \u003cli\u003eDrain old fluid and refill with one or more quarts as needed\u003c\/li\u003e\n  \u003cli\u003eUse the disposable funnel to avoid spills and contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, mechanics and DIY owners who prefer the convenience of pre-mixed antifreeze and who operate Yamaha small vehicles that call for a pre-diluted ethylene glycol coolant. This CYCLEMAX four-pack suits those who perform seasonal maintenance, maintain multiple machines, or want a ready supply for track days and trips. Always verify compatibility with your vehicle’s specifications before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I pour this antifreeze directly into my Yamaha without diluting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This CYCLEMAX product is pre-diluted to a 60\/40 coolant\/water mix and ready to pour as supplied.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this safe around pets and children?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The formula contains ethylene glycol (55–65% weight) and a bittering agent; store securely and clean spills immediately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CYCLEMAX","offers":[{"title":"Default Title","offer_id":67586710536377,"sku":"B0CKLZH8ZH","price":136.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/cyclemax-front-packaging-four-quarts.jpg?v=1790490976"},{"product_id":"genuine-sllc2-engine-coolant-antifreeze-00272-1-qt-oem-formula-with-corrosion-inhibitors","title":"Genuine SLLC2 Engine Coolant \/ Antifreeze 00272 — 1 qt OEM formula with corrosion inhibitors","description":"\u003cp\u003e\u003cstrong\u003eGenuine 00272 SLLC2 is an OEM engine coolant\/antifreeze formulated to protect cooling systems and prevent freezing and overheating under normal operating conditions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Genuine part number 00272 SLLC2 is supplied as a single-quantity container designed to match original equipment specifications. It weighs 9.34 lbs and includes a bittering agent to discourage accidental ingestion. The product is intended for maintenance and top-up of compatible cooling systems that call for the SLLC2 specification; using the correct coolant helps preserve seals, hoses, and metal components over time when applied per manufacturer guidance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant protect my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe Genuine SLLC2 formula helps regulate engine temperature by transferring heat away from the engine and resisting freezing in low temperatures. It contains corrosion inhibitors tailored for the metals and alloys commonly used in cooling systems, which helps reduce scale and rust formation when properly mixed and maintained.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to prevent overheating by efficient heat transfer\u003c\/li\u003e\n  \u003cli\u003eIncludes corrosion inhibitors that protect radiators and cylinder heads\u003c\/li\u003e\n  \u003cli\u003eBittering agent discourages accidental ingestion for safety\u003c\/li\u003e\n  \u003cli\u003eCompatible with systems specified for SLLC2-type coolants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I use this specific part number 00272 SLLC2?\u003c\/h3\u003e\n\u003cp\u003eUse this Genuine part when your vehicle manufacturer specifies SLLC2 coolant or when replacing or topping up with the same OEM product to maintain chemical compatibility. It is suitable for routine maintenance intervals or whenever the cooling system is drained, flushed, or repaired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFor top-up or refill when SLLC2 is specified in your owner’s manual\u003c\/li\u003e\n  \u003cli\u003eAfter coolant system service such as flushing or component replacement\u003c\/li\u003e\n  \u003cli\u003eWhen maintaining OEM-specified chemistry to avoid mixing incompatible coolants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I handle and store this coolant safely?\u003c\/h3\u003e\n\u003cp\u003eStore the sealed container in a cool, dry place away from pets and children; the bittering agent reduces the risk of ingestion but safe storage is essential. Dispose of any used or contaminated coolant according to local hazardous-waste guidelines and avoid releasing it into the environment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKeep out of reach of children and animals\u003c\/li\u003e\n  \u003cli\u003eStore upright, away from direct sunlight and heat sources\u003c\/li\u003e\n  \u003cli\u003eFollow local regulations for disposal; do not pour down drains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the product specifics I should know before buying?\u003c\/h3\u003e\n\u003cp\u003eThis item is sold as a single quantity at a weight of approximately 9.34 pounds and does not require a core charge. The inclusion of a bittering agent is intended as a safety feature; otherwise it is a standard OEM coolant packaged under the Genuine brand and identified by part number 00272 SLLC2.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePart number: 00272 SLLC2 (Genuine OEM)\u003c\/li\u003e\n  \u003cli\u003eSingle-quantity packaging; weight: 9.34 lbs\u003c\/li\u003e\n  \u003cli\u003eNo core charge required\u003c\/li\u003e\n  \u003cli\u003eContains bittering agent for ingestion deterrence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, DIY vehicle owners, and fleet maintenance personnel who require the exact OEM coolant chemistry specified by their vehicle manufacturer. Choose this Genuine 00272 SLLC2 product when you need a direct-replacement coolant that matches factory recommendations for compatibility and performance in vehicles calling for the SLLC2 specification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this coolant ready to use or concentrate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This listing is for the OEM coolant as sold; check the label for concentrate or pre-mix instructions before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix this with other coolants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Avoid mixing different coolant chemistries; use SLLC2-compatible products to maintain system protection and avoid incompatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Genuine","offers":[{"title":"Default Title","offer_id":67586889253049,"sku":"B0071N5DM4","price":112.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/genuine-00272-front-container.jpg?v=1790496025"},{"product_id":"engine-ice-high-performance-coolant-for-powersports-1-2-gallon-premixed-propylene-glycol-oat-formula","title":"Engine Ice high performance coolant for powersports - 1\/2 gallon premixed, propylene glycol OAT formula","description":"\u003cp\u003e\u003cstrong\u003eEngine Ice TYDS008 is a ready-to-use, phosphate-free high-performance coolant formulated to lower operating temperatures and provide freeze protection for powersports and motorcycle engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for demanding conditions, this 1\/2 gallon premixed formula uses propylene glycol and OAT (organic acid technology) to deliver reliable heat reduction without ethylene glycol. It arrives mixed with deionized water so you can pour it in straight from the bottle; independent lab testing shows measurable temperature reductions versus conventional coolants. The formulation avoids phosphates and emphasizes compatibility with modern engine materials while offering boil-over and freeze protection suitable for many recreational and performance vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow will Engine Ice lower my engine's operating temperature?\u003c\/h3\u003e\n\u003cp\u003eEngine Ice reduces system temperatures by improving heat dispersion and circulation using a low-vapor-pressure propylene glycol base and OAT corrosion inhibitors. Users typically see reductions in operating temperature compared with standard antifreeze, which preserves power and helps components run closer to their optimal thermal range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAverage temperature drop: 10–20°F in common installations\u003c\/li\u003e\n  \u003cli\u003ePremixed with deionized water for consistent thermal properties\u003c\/li\u003e\n  \u003cli\u003eFormulated to improve coolant flow and head dispersion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this coolant safe for my motorcycle, ATV, or snowmobile?\u003c\/h3\u003e\n\u003cp\u003eTYDS008 is formulated for powersports applications and is compatible with many motorcycle, ATV, and snowmobile cooling systems when used per manufacturer guidance. It is phosphate-free, free of ethylene glycol, and uses propylene glycol to reduce environmental and toxicity concerns compared with some traditional formulas.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePhosphate-free to limit deposit formation on heat-exchange surfaces\u003c\/li\u003e\n  \u003cli\u003ePropylene glycol base instead of ethylene glycol\u003c\/li\u003e\n  \u003cli\u003ePremixed RTU eliminates dilution errors that can harm compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does Engine Ice give against boiling and freezing?\u003c\/h3\u003e\n\u003cp\u003eThis premixed coolant provides boil-over protection to about 256°F and freeze protection down to roughly -7°F, suitable for many seasonal uses in temperate to cold environments. Boil and freeze points may vary based on system pressure and local conditions, so follow vehicle guidelines for maximum protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBoil-over protection rated near 256°F (at system operating pressure)\u003c\/li\u003e\n  \u003cli\u003eFreeze protection to approximately -7°F in standard installations\u003c\/li\u003e\n  \u003cli\u003eRTU mix ensures consistent protection without on-site blending\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use Engine Ice TYDS008 and maintain best performance?\u003c\/h3\u003e\n\u003cp\u003eUse the premixed coolant straight from the bottle—no dilution required. Flush the cooling system per the vehicle maker's instructions, refill with Engine Ice, and check for leaks; periodically inspect coolant condition and replace according to your service schedule or if contamination occurs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlush old coolant and contaminants before filling\u003c\/li\u003e\n  \u003cli\u003eFill to the manufacturer-recommended level; premixed for convenience\u003c\/li\u003e\n  \u003cli\u003eInspect hoses, clamps, and radiator cap when servicing the cooling system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Engine Ice TYDS008 1\/2 gallon is aimed at riders, racers, and powersports owners who need a convenient, performance-driven coolant without on-site mixing. It’s suited to enthusiasts tuning for lower operating temperatures, mechanics servicing motorcycles and ATVs, and anyone seeking an OAT, propylene glycol-based alternative to conventional ethylene glycol coolants. As with any coolant change, confirm compatibility with your vehicle manufacturer’s recommendations before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to dilute Engine Ice TYDS008 before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This product is premixed with deionized water and ready to pour into your cooling system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Engine Ice TYDS008 safe for aluminum engine components?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The OAT formulation is designed for compatibility with common engine metals, but verify your manufacturer's coolant recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Engine Ice","offers":[{"title":"Default Title","offer_id":67586901049529,"sku":"B000H01NFY","price":99.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/engine-ice-tyds008-front-label.jpg?v=1790496657"},{"product_id":"acdelco-dex-cool-extended-life-coolant-1-gallon-orange-oat-antifreeze-pre-mixed","title":"ACDelco DEX-COOL Extended Life Coolant 1 Gallon - Orange OAT Antifreeze, Pre-Mixed","description":"\u003cp\u003e\u003cstrong\u003eACDelco 10-101 DEX-COOL Extended Life Coolant is a 1-gallon, orange-colored antifreeze formulated to provide long-lasting engine protection and corrosion inhibition for compatible GM and non-GM vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 1-gallon bottle of ACDelco 10-101 contains DEX-COOL chemistry designed for extended service intervals and year-round temperature protection. It comes pre-mixed concentrate ready for topping off or complete cooling system fills depending on vehicle requirements, and includes a bittering agent to discourage accidental ingestion. Use with the correct vehicle specifications and follow manufacturer mixing and service guidelines.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes this coolant different from conventional antifreeze?\u003c\/h3\u003e\n\u003cp\u003eACDelco 10-101 uses an OAT (organic acid technology) DEX-COOL formula that focuses on extended corrosion protection without relying on silicates or phosphates. Its formulation aims to reduce the frequency of coolant changes when used in compatible systems and helps maintain aluminum and other common engine metals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDEX-COOL OAT chemistry for long-life protection\u003c\/li\u003e\n  \u003cli\u003eOrange color for easy identification and leak detection\u003c\/li\u003e\n  \u003cli\u003eContains bittering agent to reduce ingestion risk\u003c\/li\u003e\n  \u003cli\u003eOEM-compatible for many GM vehicles and other makes specifying DEX-COOL\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use ACDelco 10-101 in my vehicle?\u003c\/h3\u003e\n\u003cp\u003eFollow your vehicle manufacturer’s coolant recommendations before adding or replacing coolant. The product is supplied ready to use at the stated formula; some repairs or drain-and-refill jobs may require a specific mix ratio or system flush—consult your owner’s manual or a service technician.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck owner’s manual for DEX-COOL compatibility and fill instructions\u003c\/li\u003e\n  \u003cli\u003ePerform a cooling system flush if changing from a different coolant type\u003c\/li\u003e\n  \u003cli\u003eTop off when the engine is cold and system pressure is relieved\u003c\/li\u003e\n  \u003cli\u003eUse proper disposal methods for old coolant per local regulations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and safety features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis coolant offers freeze\/boil protection typical of long-life formulations when used at the correct concentration and provides corrosion inhibitors tailored for modern engine alloys. The included bittering agent is a safety feature to deter accidental ingestion; always handle with gloves and keep out of reach of children and pets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLong-life corrosion inhibition for engine metals and cooling components\u003c\/li\u003e\n  \u003cli\u003eFreeze and boil protection when mixed per vehicle requirements\u003c\/li\u003e\n  \u003cli\u003eBittering agent for ingestion deterrence and added safety\u003c\/li\u003e\n  \u003cli\u003eOrange dye aids visual inspection and leak spotting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product best suited for? Vehicle owners, technicians, and fleet managers who need a DEX-COOL compatible coolant for GM and other vehicles specifying OAT DEX-COOL formulas will find this 1-gallon ACDelco product useful. It’s appropriate for routine maintenance, topping off between service intervals, and for use during scheduled coolant replacements when the system requires DEX-COOL chemistry. If your vehicle manual requests a different coolant type or a silicate\/phosphate-based formula, choose a product that matches that specification instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is ACDelco 10-101 DEX-COOL compatible with all vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It’s intended for systems that specify DEX-COOL or compatible OAT coolants; check your owner’s manual before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to dilute this coolant before using?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This 1-gallon product is ready for use per label instructions; follow your vehicle’s recommended concentration if mixing is required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ACDelco","offers":[{"title":"Default Title","offer_id":67586935390393,"sku":"B000QGWYFC","price":104.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/acdelco-10-101-front-packaging.jpg?v=1790497408"},{"product_id":"zerex-g40-si-oat-antifreeze-coolant-concentrate-1-gal-violet-phosphate-nitrite-free-aluminum-protection","title":"Zerex G40 Si‑OAT Antifreeze\/Coolant Concentrate 1 Gal (Violet) — Phosphate \u0026 Nitrite Free, Aluminum Protection","description":"\u003cstrong\u003eZerex G40 is a concentrated Si‑Organic Acid Technology (Si‑OAT) antifreeze\/coolant designed to protect modern and classic car cooling systems from corrosion, freezing, and overheating.\u003c\/strong\u003e\n\n\u003cp\u003eZerex G40 from Valvoline is a long‑life, ethylene glycol‑based concentrate engineered for cars and light trucks that require an OEM‑approved carboxylate formula. Formulated without nitrites, amines, phosphates, borates or nitrates, this violet concentrate delivers comprehensive protection for aluminum and mixed‑metal cooling systems. Mix it to specification for reliable freeze and boil protection while helping prevent deposits, leaks and corrosion that lead to cooling‑system failures.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Zerex G40 protect my engine cooling system?\u003c\/h3\u003e\n\u003cp\u003eThe Si‑OAT chemistry creates a protective film on metal surfaces to limit corrosion and scale buildup across radiators, water pumps, and heater cores. It resists the chemical breakdown that accelerates wear, helping the cooling system maintain flow and thermal efficiency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSi‑Organic Acid Technology forms long‑lasting protection on aluminum and mixed metals\u003c\/li\u003e\n  \u003cli\u003eFree of nitrites, amines and phosphates to reduce deposit formation\u003c\/li\u003e\n  \u003cli\u003eHelps prevent rust, scale and electrochemical corrosion that clog passages\u003c\/li\u003e\n  \u003cli\u003eSafe for gaskets, hoses and cooling system plastics when mixed correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat dilution should I use for different climates?\u003c\/h3\u003e\n\u003cp\u003eZerex G40 is a concentrate that must be mixed with water to achieve targeted freeze and boil performance. Follow the manufacturer’s ratio guidance for seasonal extremes or year‑round protection to balance freeze point and heat transfer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50:50 mix (antifreeze:water) protects approximately down to -34°F and up to 265°F (boil with cap)\u003c\/li\u003e\n  \u003cli\u003e60:40 mix provides colder protection near -62°F and similar anti‑boil performance\u003c\/li\u003e\n  \u003cli\u003e70:30 mix increases low‑temperature protection further for very cold climates\u003c\/li\u003e\n  \u003cli\u003eUse clean tap or demineralized water to avoid hard‑water deposits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and services is Zerex G40 suited for?\u003c\/h3\u003e\n\u003cp\u003eG40 is recommended for many European makes and other vehicles that specify a carboxylate or Si‑OAT coolant. It works equally well for topping off radiators, flushing and refilling, or full system maintenance when OEM compatibility is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended for BMW, Mercedes‑Benz, Porsche, Volkswagen, and many older Audi and Volvo models\u003c\/li\u003e\n  \u003cli\u003eSuitable for cars and light trucks with aluminum or mixed‑metal cooling systems\u003c\/li\u003e\n  \u003cli\u003eGood for both topping off and complete cooling system replacement services\u003c\/li\u003e\n  \u003cli\u003eBacked by batch testing and real‑world fleet validation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and safety features does this concentrate include?\u003c\/h3\u003e\n\u003cp\u003eZerex G40 combines freeze\/boil protection with corrosion inhibitors while minimizing harm to nonmetal parts. It contains a bittering agent to discourage ingestion and is formulated without certain traditional inhibitors to reduce deposit risks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides industry‑leading freeze and anti‑boil protection when mixed per directions\u003c\/li\u003e\n  \u003cli\u003eViolet color concentrate for easy identification in service\u003c\/li\u003e\n  \u003cli\u003eContains denatonium benzoate (30–50 ppm) as a bittering agent for safety\u003c\/li\u003e\n  \u003cli\u003e5 year \/ 150,000 mile protection against engine failure from freeze or boil events\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Zerex G40 is aimed at car and light‑truck owners, technicians, and fleet managers who need an OEM‑approved, long‑life coolant concentrate that performs in mixed‑metal systems—especially owners of European vehicles that specify carboxylate or Si‑OAT technology. Choose this concentrate if you want durable corrosion resistance, flexible dilution for extreme temperatures, and a formula tested in both labs and the field. Always follow your vehicle manufacturer’s coolant recommendations and mix ratios before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Zerex G40 be mixed with other coolants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Zerex G40 is a Si‑OAT concentrate; mixing with incompatible formulas may reduce protection. Follow vehicle OEM guidance or flush system before switching.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace Zerex G40 coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The formula supports up to 5 years or 150,000 miles, but inspect coolant condition and follow your vehicle manufacturer’s service interval.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Zerex","offers":[{"title":"Default Title","offer_id":67587104964793,"sku":"B079WRBS36","price":105.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/zerex-g40-front-label.jpg?v=1790499423"},{"product_id":"4into1-honda-type-2-hp-motorcycle-coolant-2-pack-2-32-fl-oz-premixed-blue-oem-spec-corrosion-protection","title":"4into1 Honda Type‑2 HP Motorcycle Coolant 2‑Pack (2×32 fl oz) Premixed Blue — OEM‑Spec Corrosion Protection","description":"\u003cp\u003e\u003cstrong\u003e4into1 2 Pack Genuine Honda Type 2 HP Motorcycle Coolant is a ready-to-use, factory-formulated radiator fluid that replaces Honda’s original green coolant with the advanced Type‑2 blue formula for reliable freeze and boil protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis twin-pack supplies two 32 fl. oz. (1 qt \/ 0.946 L) bottles of Honda Type‑2 HP coolant in a 50\/50 premixed blend, made to the OEM specification. The formula contains a non‑abrasive corrosion inhibitor and a bittering safety additive, so you can top up or change motorcycle cooling systems without mixing concentrate. It’s engineered to perform across a wide temperature range and to be fully compatible with systems that originally used Honda’s green coolant.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant protect my motorcycle engine?\u003c\/h3\u003e\n\u003cp\u003eThe Type‑2 HP formula shields engine metals and cooling components with a non‑abrasive corrosion inhibitor that reduces pitting and scale. It also maintains stable thermal transfer properties so the cooling system runs efficiently under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon‑abrasive corrosion inhibitor protects aluminum and other metals.\u003c\/li\u003e\n  \u003cli\u003ePremixed 50\/50 ready-to-use reduces dilution errors.\u003c\/li\u003e\n  \u003cli\u003eStable thermal performance for sustained engine cooling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the temperature limits and performance specs?\u003c\/h3\u003e\n\u003cp\u003eThis coolant provides freeze protection down to approximately −34°F and boiling protection up to about 265°F at 15 PSI, matching the practical extremes encountered in most riding conditions. Those ratings help prevent freeze-related blockages and reduce the risk of overheating during spirited use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFreeze protection to −34°F for cold climates.\u003c\/li\u003e\n  \u003cli\u003eBoiling resistance to 265°F at 15 PSI for high-load situations.\u003c\/li\u003e\n  \u003cli\u003eOEM-grade performance tuned for Honda motorcycle cooling systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs Type‑2 blue coolant compatible with my existing radiator fluid?\u003c\/h3\u003e\n\u003cp\u003eHonda’s Type‑2 blue formula was designed to be fully backward-compatible with the older green coolant, so it can be used as a direct replacement without flushing for systems that specify compatibility. For best results, follow your service manual for mixing or replacement intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% compatible replacement for original Honda green coolant.\u003c\/li\u003e\n  \u003cli\u003ePremixed to avoid on-site blending errors.\u003c\/li\u003e\n  \u003cli\u003eContains bittering agent to discourage accidental ingestion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use and store the 4into1 Genuine Honda coolant?\u003c\/h3\u003e\n\u003cp\u003eUse the premixed 50\/50 solution directly—no water required—when topping off or refilling the radiator. Store bottles upright in a cool, dry place away from direct sunlight and out of reach of children and pets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReady-to-use—no dilution needed before filling.\u003c\/li\u003e\n  \u003cli\u003eStore in original sealed container at moderate temperatures.\u003c\/li\u003e\n  \u003cli\u003eDispose per local hazardous-liquid regulations when empty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, mechanics, and motorcycle shop owners who need a reliable, OEM‑spec replacement coolant for Honda motorcycles or any bike that calls for a Type‑2 formula. It suits those who prefer premixed convenience and consistent protection in a compact 32 fl. oz. bottle—supplied here as a convenient 2‑pack for scheduled maintenance or workshop use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix this Type‑2 coolant with other brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Type‑2 Honda coolant is formulated to be compatible with the original Honda green coolant, but avoid mixing different inhibitor technologies unless manufacturer compatibility is confirmed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to dilute the premixed 50\/50 coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—these bottles are premixed 50\/50 and ready to use straight from the container; do not dilute before adding to the radiator.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"4into1","offers":[{"title":"Default Title","offer_id":67587129901241,"sku":"B0FHJWX734","price":98.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/4into1-honda-type2-front-packaging.jpg?v=1790500541"},{"product_id":"vp-racing-stay-frosty-race-ready-coolant-1-gallon-ready-to-use-water-based-corrosion-protection","title":"VP Racing Stay Frosty Race-Ready Coolant — 1 Gallon Ready-to-Use Water-Based, Corrosion Protection","description":"\u003cstrong\u003eVP Racing Fuels 23051 Stay Frosty Race-Ready Coolant is a ready-to-use, water-based racing coolant formulated to lower engine temperatures and protect high-compression race engines.\u003c\/strong\u003e\n\n\u003cp\u003eBuilt specifically for demanding track conditions, this 1-gallon, non-glycol coolant uses purified reverse-osmosis water and performance-grade additives to improve heat transfer, guard against corrosion, and help maintain consistent combustion in high-heat engines. It ships pre-mixed so there’s no dilution or measuring — just pour and go. The formula targets racing applications where temperature control and metal protection are critical, while remaining biodegradable and free of glycols.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Stay Frosty help manage extreme engine temperatures?\u003c\/h3\u003e\n\u003cp\u003eStay Frosty improves the coolant’s ability to carry heat away from hot cylinder heads and other critical components, helping reduce operating temperatures compared with conventional glycols. That temperature margin can let tuners optimize ignition timing and air\/fuel density without pushing the engine toward detonation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClaims up to a 30°F reduction versus standard glycol coolant in comparable conditions\u003c\/li\u003e\n  \u003cli\u003eSpecialized heat-transfer agents speed thermal flow from combustion areas\u003c\/li\u003e\n  \u003cli\u003eRO-purified water eliminates contaminants that can reduce cooling efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product ready to use straight from the bottle?\u003c\/h3\u003e\n\u003cp\u003eYes — the gallon arrives pre-mixed and requires no on-site dilution. Because it’s formulated as a water-based, ready-to-use solution, installation is quick and avoids mistakes from incorrect mixing ratios.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% water-based, no additional antifreeze required\u003c\/li\u003e\n  \u003cli\u003eBiodegradable and free of glycol—safer handling and disposal\u003c\/li\u003e\n  \u003cli\u003eStraight pour-in application reduces prep time at the track\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Stay Frosty protect engine metals and cooling systems?\u003c\/h3\u003e\n\u003cp\u003eThe coolant includes corrosion inhibitors and lubricants designed to shield a wide range of metals, including aluminum alloys commonly used in performance radiators and heads. It meets industry corrosion standards to help prevent electrolysis and long-term damage to cooling system components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulated to lubricate and protect ferrous and non-ferrous metals\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce electrolysis and meet ASTM D3306 corrosion benchmarks\u003c\/li\u003e\n  \u003cli\u003eSafe for modern radiator materials and seals when used as directed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this coolant affect power and tuning options?\u003c\/h3\u003e\n\u003cp\u003eBy lowering engine operating temperatures and maintaining cleaner, denser intake charge conditions, Stay Frosty can create more headroom for advancing ignition timing and extracting safe additional horsepower. Its chemically stable, contaminant-reduced base helps ensure consistent performance lap after lap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDenser air\/fuel mixtures can improve volumetric efficiency under load\u003c\/li\u003e\n  \u003cli\u003eCleaner RO water base reduces heat-transfer losses from dissolved contaminants\u003c\/li\u003e\n  \u003cli\u003eNon-toxic, stable blend supports repeatable tuning at the track\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? VP Racing Fuels Stay Frosty Race-Ready Coolant is intended for racers, engine builders, and performance enthusiasts who run high-compression or high-heat engines and need a plug-and-play cooling solution that prioritizes thermal performance and metal protection. It’s especially useful for club racers, drag racers, and track-day drivers who want a non-glycol, biodegradable option that comes ready to use without mixing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to mix this coolant before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This product is pre-mixed and ready to pour straight from the container.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Stay Frosty safe for aluminum radiators?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes corrosion inhibitors designed to protect aluminum alloys and meet ASTM D3306 standards.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VP Racing","offers":[{"title":"Default Title","offer_id":67587281223865,"sku":"B09BW2JGWQ","price":105.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vp-racing-stay-frosty-front-gallon.jpg?v=1790504061"},{"product_id":"evans-waterless-powersports-engine-coolant-ec72064-1-2-gallon-long-life-corrosion-protection","title":"EVANS waterless powersports engine coolant EC72064 — 1\/2 gallon, long-life corrosion protection","description":"\u003cp\u003e\u003cstrong\u003eEVANS Coolant EC72064 is a waterless, long-life engine coolant formulated for powersports machines to prevent corrosion, reduce cavitation and cut routine cooling-system maintenance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis half-gallon bottle of EVANS waterless coolant is engineered specifically for high-performance and recreational powersports vehicles — motocross, trail and street bikes, quads, ATVs, UTVs and snowmobiles. Because it contains no water, the formula avoids the chemical and electrochemical problems that can arise in wet cooling systems. Race teams and enthusiasts choose waterless coolants to protect components, stabilize boiling points and lower the frequency of coolant-related service.\u003c\/p\u003e\n\n\u003ch3\u003eHow does a waterless coolant protect my engine compared with traditional antifreeze?\u003c\/h3\u003e\n\n\u003cp\u003eWithout water in the formula, evaporation, electrolysis and wet-sleeve cavitation are greatly reduced, which helps preserve liners, heads and water pumps. The higher boiling point also keeps operating temperatures stable under heavy loads or sustained high RPMs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEliminates water-related corrosion mechanisms\u003c\/li\u003e\n  \u003cli\u003eReduces liner and pump cavitation erosion\u003c\/li\u003e\n  \u003cli\u003eProvides a higher boiling point and stable cooling under stress\u003c\/li\u003e\n  \u003cli\u003eExtends intervals between coolant changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill EVANS EC72064 work in my powersports vehicle and how do I install it?\u003c\/h3\u003e\n\n\u003cp\u003eThis product is designed for a wide range of powersports applications, including motocross, Enduro, trail and street bikes, plus quads, ATVs, UTVs and snowmobiles. For proper conversion, all traces of previous water-based coolant and any residual water must be removed before filling with EVANS waterless coolant.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with many engines that use liquid cooling—check manufacturer guidance\u003c\/li\u003e\n  \u003cli\u003eFlush and fully dry the system to avoid mixing with water\u003c\/li\u003e\n  \u003cli\u003eFollow the manufacturer’s fill and bleed procedures for best results\u003c\/li\u003e\n  \u003cli\u003eUse the half-gallon size for partial fills, top-offs, or small systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and performance benefits can I expect?\u003c\/h3\u003e\n\n\u003cp\u003eSwitching to EVANS waterless coolant reduces common cooling-system wear and often lowers overall service needs. Because this coolant resists electrolysis and corrosion, it helps reduce metal loss and component failure modes that typically require repair.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFewer coolant changes and less frequent corrosion-related repairs\u003c\/li\u003e\n  \u003cli\u003eMinimizes electrolysis and related electrical degradation in the system\u003c\/li\u003e\n  \u003cli\u003eProven in motorsports environments where durability matters\u003c\/li\u003e\n  \u003cli\u003eSimplifies care for seasonal or high-use machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? EVANS Coolant EC72064 is aimed at riders, mechanics and racing teams who need a dependable, water-free cooling solution for small-displacement and high-performance powersports engines. It’s ideal for people who want to limit corrosion and cavitation damage, reduce downtime, and maintain consistent cooling under demanding conditions. If you plan to convert from a water-based coolant, be prepared to remove all old coolant and moisture first to achieve the full benefits of a waterless system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can EVANS EC72064 be mixed with regular coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Do not mix with water-based coolants. Fully remove old coolant and moisture before installing EVANS waterless coolant for correct performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this coolant suitable for snowmobiles and ATVs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. EC72064 is formulated for powersports including snowmobiles, quads, ATVs, UTVs, and most bikes, when systems are properly converted.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVANS","offers":[{"title":"Default Title","offer_id":67587324805305,"sku":"B00R69MDCG","price":104.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evans-coolant-ec72064-front-label.jpg?v=1790506101"},{"product_id":"peak-sierra-antifreeze-coolant-propylene-glycol-gallon-less-toxic-freeze-corrosion-protection","title":"PEAK Sierra Antifreeze\/Coolant Propylene Glycol Gallon — Less-Toxic Freeze \u0026 Corrosion Protection","description":"\u003cp\u003e\u003cstrong\u003ePEAK Sierra Antifreeze\/Coolant is a one-gallon, propylene-glycol based coolant formulated to protect modern engines without using ethylene glycol.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngine cooling systems need a coolant that balances freeze and boil protection, corrosion control and safe handling. PEAK Sierra Antifreeze\/Coolant delivers a propylene glycol formula designed to be less toxic than traditional ethylene-glycol fluids while offering dependable thermal performance. Packaged in a convenient one-gallon plastic bottle, this product is suitable for topping off or refilling passenger cars, trucks and light-duty equipment following manufacturer recommendations.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this antifreeze protect my engine's cooling system?\u003c\/h3\u003e\n\n\u003cp\u003eThe formula helps manage engine temperatures and reduces corrosion inside the cooling system. It contains inhibitors that coat metal surfaces to slow rust and scale buildup, preserving radiator, pump and head gasket integrity when used as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePropylene glycol base for heat transfer and freeze protection\u003c\/li\u003e\n  \u003cli\u003eCorrosion inhibitors for aluminum, steel and cast iron parts\u003c\/li\u003e\n  \u003cli\u003eCompatible with typical cooling system metals when mixed correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this coolant safer to handle around people and pets?\u003c\/h3\u003e\n\n\u003cp\u003eCompared with ethylene-glycol-based coolants, propylene-glycol formulations are generally considered less acutely toxic if accidentally ingested, making them a preferred option in environments where spills or exposure are a concern. Safe use still requires standard precautions: avoid ingestion, keep away from children and pets, and clean spills promptly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePropylene glycol reduces acute toxicity risk versus ethylene glycol\u003c\/li\u003e\n  \u003cli\u003ePlastic one-gallon bottle for controlled pouring and storage\u003c\/li\u003e\n  \u003cli\u003eFollow label instructions for handling and disposal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use PEAK Sierra Antifreeze\/Coolant in my vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eRefer to your vehicle manufacturer’s coolant recommendation and mixture ratio before adding or replacing coolant. You can use this product as a concentrate or mix it with water to achieve the manufacturer-specified freeze\/boil protection. Always allow the engine to cool before opening the cooling system to avoid injury.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck owner manual for required coolant type and concentration\u003c\/li\u003e\n  \u003cli\u003eMix with distilled water if required to reach target protection levels\u003c\/li\u003e\n  \u003cli\u003eFill when the engine is cool and bleed air from the system per instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e PEAK Sierra Antifreeze\/Coolant is aimed at car and light-truck owners, DIY mechanics and fleet operators who want a propylene-glycol based coolant that minimizes ethylene-glycol exposure while delivering corrosion protection and dependable thermal control. It’s a practical choice for routine maintenance, seasonal top-offs and refills when matched to your vehicle manufacturer’s specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix PEAK Sierra with other coolants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mixing with similar propylene-glycol coolants is usually acceptable; avoid combining with ethylene-glycol products unless manufacturer guidance allows it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mixture should I use for winter protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow your vehicle manual, typically a 50\/50 mix with water gives balanced freeze and boil protection for most climates.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67587338076345,"sku":"B000CCM5JA","price":107.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-sierra-front-bottle.jpg?v=1790506500"},{"product_id":"engine-ice-sxs-atv-coolant-antifreeze-orange-1-2-gal-pre-mixed-high-heat-transfer","title":"Engine Ice SXS\/ATV Coolant \u0026 Antifreeze — Orange 1\/2 Gal, Pre-Mixed High-Heat Transfer","description":"\u003cp\u003e\u003cstrong\u003eEngine Ice Hi-Performance SXS\/ATV Coolant \u0026amp; Antifreeze Orange is a pre-mixed, half-gallon coolant engineered for side-by-sides and ATVs to improve heat management, corrosion protection, and freeze\/boil resistance for demanding off-road use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt specifically for the thermal and corrosion challenges of high-revving SXS and UTV engines, this Engine Ice formula balances rapid heat dispersion with robust protection for aluminum and mixed-metal cooling systems. The product is pre-mixed for immediate use, phosphate-free, and formulated to meet or exceed the ASTMD3306 performance standard while offering lower toxicity than traditional ethylene-glycol coolants.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant manage high engine temperatures on long rides?\u003c\/h3\u003e\n\u003cp\u003eEngine Ice uses a concentrated thermal-transfer formulation to move heat away from critical components faster than plain water. That helps the engine maintain a safer operating temperature under load, reducing the risk of overheating during extended trail use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnhanced heat dispersion designed for high-output SXS\/ATV engines\u003c\/li\u003e\n  \u003cli\u003eBoil-over resistance up to roughly 256–259°F under typical systems\u003c\/li\u003e\n  \u003cli\u003eStable performance under sustained heavy loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this protect my cooling system from corrosion and wear?\u003c\/h3\u003e\n\u003cp\u003eYes — the Engine Ice formula contains inhibitors tailored to shield aluminum, steel, and other metals commonly found in off-road vehicle cooling systems. Regular use helps slow rust and scale formation, extending component life and reducing maintenance intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTargeted corrosion inhibitors for mixed-metal systems\u003c\/li\u003e\n  \u003cli\u003eReduces oxidation and deposits compared with plain water\u003c\/li\u003e\n  \u003cli\u003eCompatible with typical SXS\/UTV radiators and hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperature range does it cover for seasonal use?\u003c\/h3\u003e\n\u003cp\u003eThis pre-mixed coolant offers wide-range protection to handle diverse riding climates. It protects against boil-over at high operating temperatures and provides freeze resistance suitable for many cold-weather conditions encountered off-road.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBoil-over protection up to approximately 256–259°F in many systems\u003c\/li\u003e\n  \u003cli\u003eFreeze protection down to about -24°F to -28°F depending on system\u003c\/li\u003e\n  \u003cli\u003eReliable performance across hot summer trails and cool-season rides\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use and maintain during coolant changes?\u003c\/h3\u003e\n\u003cp\u003eThe half-gallon bottle comes pre-mixed, so there’s no measuring or diluting required—simply pour in per your vehicle’s service instructions. Its size is convenient for single-vehicle top-ups or full-system changes on many SXS and ATV models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-mixed formula—no mixing ratios or distilled water needed\u003c\/li\u003e\n  \u003cli\u003e1\/2 gallon capacity fits typical top-up and bleed procedures\u003c\/li\u003e\n  \u003cli\u003eClear labeling and orange color for quick visual checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Engine Ice Hi-Performance SXS\/ATV Coolant is aimed at off-road riders, mechanics, and fleet managers who run side-by-sides, UTVs, or ATVs and want a ready-to-use coolant that improves heat control and reduces corrosion risk. It’s especially useful for users who push machines hard in varied climates and prefer a lower-toxicity, phosphate-free product that meets industry performance standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Engine Ice SXS\/ATV coolant ready to use or does it need mixing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It comes pre-mixed in a 1\/2 gallon bottle—no dilution required, ready for immediate top-up or coolant change.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this coolant year-round in different climates?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It provides boil-over protection up to ~256–259°F and freeze protection down to roughly -24°F to -28°F, suitable for many climates.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Engine Ice","offers":[{"title":"Default Title","offer_id":67587493363897,"sku":"B0C9PB9BY1","price":98.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/engine-ice-half-gallon-front-label.jpg?v=1790510245"},{"product_id":"red-line-supercool-extreme-powersports-coolant-1-2-gallon-pre-mixed-with-waterwetter-corrosion-protection","title":"Red Line Supercool Extreme Powersports Coolant — 1\/2 Gallon, Pre-Mixed with WaterWetter \u0026 Corrosion Protection","description":"\u003cp\u003e\u003cstrong\u003eRed Line 80205 Supercool Extreme is a pre-mixed, high-performance powersports coolant with WaterWetter for superior heat transfer and corrosion protection in motorcycles, ATVs, karts, and small engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for modern cooling systems, this ready-to-use 1\/2 gallon formula combines purified deionized water with a precise WaterWetter concentration plus Red Line’s corrosion-inhibiting chemistry. It arrives mixed and balanced so you can pour it directly into radiators and reservoirs without measuring or diluting. The blend is designed to improve heat transfer, protect mixed-metal systems, reduce electrolysis and help extend water pump seal life while remaining compatible with common antifreeze and coolant products.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant improve cooling performance under heavy loads?\u003c\/h3\u003e\n\u003cp\u003eSupercool Extreme lowers thermal resistance by using WaterWetter’s surface-tension-reducing action and Red Line’s additives to move heat away from hot spots faster than plain water. That helps engines run cooler during hard use without sacrificing protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterWetter component enhances coolant contact with metal surfaces for faster heat transfer\u003c\/li\u003e\n  \u003cli\u003ePre-mixed with deionized water to avoid mineral deposits that impede cooling\u003c\/li\u003e\n  \u003cli\u003eFormulated to work in small-displacement and high-revving powersports engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this coolant protect against corrosion and electrolysis in mixed-metal systems?\u003c\/h3\u003e\n\u003cp\u003eYes. The formula contains corrosion inhibitors tailored for aluminum, cast iron, copper, brass and bronze so it defends dissimilar metals found in many modern cooling systems. It also reduces electrolysis-related damage caused by stray currents.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInhibitors suppress rust formation and slow galvanic attack between different metals\u003c\/li\u003e\n  \u003cli\u003eHelps maintain clean coolant passages by limiting deposit formation\u003c\/li\u003e\n  \u003cli\u003eCompatible with typical antifreeze and coolant concentrates for flexible maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need to mix this coolant before use, and is it compatible with my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThis product is supplied pre-mixed to the correct working concentration, so no dilution is required — just pour and go. It’s formulated for powersports and small engine applications and is compatible with conventional antifreeze\/coolant products when topping off or during maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-mixed 50\/50-equivalent formula for immediate use\u003c\/li\u003e\n  \u003cli\u003eSafe for aluminum and other metals commonly used in powersports cooling systems\u003c\/li\u003e\n  \u003cli\u003eWorks with existing coolant in most systems when following proper blending guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Supercool Extreme help water pump seals and overall system longevity?\u003c\/h3\u003e\n\u003cp\u003eThe formulation includes lubricating agents that condition and reduce wear on rubber seals and water pump components. By controlling corrosion and keeping passages cleaner, it contributes to longer service life for pumps and cooling parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLubricates seals to reduce leaks and premature failure\u003c\/li\u003e\n  \u003cli\u003eInhibits deposit buildup that can cause cavitation and reduced flow\u003c\/li\u003e\n  \u003cli\u003eHelps maintain consistent coolant performance between services\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: Red Line 80205 Supercool Extreme is aimed at motorcycle riders, ATV\/UTV owners, kart racers, and small-engine enthusiasts who demand a convenient, high-performing coolant that balances heat-transfer efficiency with corrosion protection. It’s ideal for technicians and DIYers who want a ready-to-use solution that avoids on-site mixing, protects mixed-metal systems, and supports aggressive riding or racing conditions.\u003c\/p\u003e\n\n\u003cp\u003eKey practical notes: keep spare coolant on hand to quickly top up low systems, follow your vehicle manufacturer’s service intervals, and flush the cooling system as recommended if switching between very different coolant chemistries. Red Line’s reputation since 1979 reflects a focus on performance and protection for motorsports and enthusiast applications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this coolant ready to use or does it need mixing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It comes pre-mixed with deionized water and the correct WaterWetter proportion, ready to pour — no dilution required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix it with other antifreeze brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is compatible with most conventional antifreeze and coolant products, but follow manufacturer guidance when blending.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Red Line","offers":[{"title":"Default Title","offer_id":67587504668857,"sku":"B007KPSLU4","price":93.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/red-line-supercool-extreme-front-label.jpg?v=1790510807"},{"product_id":"omtech-co2-laser-coolant-1-gal-prediluted-non-conductive-freeze-protection-to-31-f-corrosion-inhibitors","title":"OMTech CO2 Laser Coolant 1 gal Prediluted Non-Conductive — Freeze Protection to -31°F, Corrosion Inhibitors","description":"\u003cp\u003e\u003cstrong\u003eOMTech 1 gal Non-Conductive CO2 Laser Coolant is a prediluted, low-conductivity ethylene-glycol cooling fluid formulated to protect CO2 laser tubes from freezing, overheating, and corrosion while being ready to pour into chillers or tanks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you run a hobby engraving setup or a small production laser shop, maintaining stable tube temperature and preventing mineral build-up are essential for consistent cutting and engraving results. This one-gallon, pre-mixed coolant from OMTech is designed specifically for CO2 laser systems: it delivers freeze protection to -31°F, includes corrosion inhibitors and a bittering agent, and keeps electrical conductivity extremely low to avoid harming sensitive laser electronics.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant protect my CO2 laser tube?\u003c\/h3\u003e\n\u003cp\u003eThe OMTech formula combines ethylene glycol with corrosion inhibitors to prevent erosion and oxidative damage inside water lines and the tube itself. Low electrical conductivity minimizes the risk of stray currents that can shorten tube life, while the bitterant discourages accidental ingestion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFreeze protection down to -31°F (-35°C)\u003c\/li\u003e\n  \u003cli\u003eCorrosion inhibitors to reduce erosion and mineral damage\u003c\/li\u003e\n  \u003cli\u003eUltra low conductivity (~10 µS\/cm) to protect electronics\u003c\/li\u003e\n  \u003cli\u003eBittering agent added for safety around pets and children\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the coolant ready to use, and how do I add it to my system?\u003c\/h3\u003e\n\u003cp\u003eThis product arrives prediluted and ready to pour—no mixing required—saving setup time and reducing dilution errors. For best results, flush the cooling system with distilled or deionized water first, then fill the tank or chiller with the OMTech coolant to the manufacturer-recommended level.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-mixed for immediate use—no onsite dilution\u003c\/li\u003e\n  \u003cli\u003eRecommended system flush with distilled or DI water beforehand\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard CO2 laser water chillers and cooling tanks\u003c\/li\u003e\n  \u003cli\u003eFollow your laser maker’s fill and maintenance guidelines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this coolant work with my existing chiller or water lines?\u003c\/h3\u003e\n\u003cp\u003eOMTech engineered this fluid for universal compatibility with CO2 laser chillers and tanks, but it is not compatible with automotive antifreeze or other coolant brands. Mixing with different formulas can cause chemical reactions, so always use a single compatible product and rinse the system if switching.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulated for CO2 laser water chillers and cooling tanks\u003c\/li\u003e\n  \u003cli\u003eDo not mix with automotive antifreeze or unknown coolants\u003c\/li\u003e\n  \u003cli\u003eMixing with other coolants may reduce performance or damage parts\u003c\/li\u003e\n  \u003cli\u003eIf changing fluids, thoroughly clean the system first\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this coolant affect performance and maintenance?\u003c\/h3\u003e\n\u003cp\u003eRegular use of a purpose-built coolant helps remove excess heat quickly and reduces oxidation and dust accumulation in the coolant loop, which supports consistent laser output and longer tube life. The low viscosity keeps flow rates stable, and the corrosion inhibitors slow wear in pumps and fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast heat transfer to maintain stable operating temperatures\u003c\/li\u003e\n  \u003cli\u003eReduced oxidation and deposit formation for cleaner loops\u003c\/li\u003e\n  \u003cli\u003eLow viscosity for reliable pump performance and flow\u003c\/li\u003e\n  \u003cli\u003eHelps extend component life with corrosion protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: OMTech’s 1-gallon prediluted CO2 laser coolant is suited for hobbyists, makers, and small businesses running CO2 laser cutters or engravers that require dependable temperature control and low-conductivity fluid. It’s particularly useful for users who want a ready-to-use solution that minimizes setup time and lowers risk to sensitive electronics. Avoid using it with non-laser-specific coolants and always follow your machine manufacturer’s maintenance schedule for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix OMTech coolant with my existing antifreeze?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Do not mix with automotive antifreeze or different coolant formulas—chemical reactions can damage your laser.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the coolant ready to use or does it require dilution?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The coolant is prediluted and ready to pour; flush the system first with distilled or deionized water for best results.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OMTech","offers":[{"title":"Default Title","offer_id":67587507683513,"sku":"B0BNB7DC9Q","price":123.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/omtech-front-label-1-gallon-coolant.jpg?v=1790510981"},{"product_id":"star-brite-synthetic-engine-coolant-antifreeze-premixed-propylene-glycol-corrosion-freeze-protection","title":"STAR BRITE Synthetic Engine Coolant \u0026 Antifreeze, Premixed Propylene Glycol — Corrosion \u0026 Freeze Protection","description":"\u003cp\u003e\u003cstrong\u003eSTAR BRITE Star Cool Synthetic Engine Coolant \u0026amp; Antifreeze is a ready-to-use, propylene-glycol based coolant engineered to protect engines from corrosion, boilovers, and freeze damage while sealing small leaks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eStar Cool combines a modern POAT additive package with de-ionized water to deliver long-lasting thermal control and system protection for gasoline and diesel engines. Formulated to exceed OEM and ASTM benchmarks, it arrives premixed for immediate use, eliminates guesswork when topping off, and is legal for sale in all 50 states. Whether you’re maintaining a car, truck, marine motor, or RV engine, this coolant aims to provide reliable year-round temperature management and improved cooling system integrity.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Star Cool help my engine perform better?\u003c\/h3\u003e\n\u003cp\u003eStar Cool is designed to stabilize operating temperatures so engines run efficiently under load and during hot weather. Its specialty polymer-organic additives reduce corrosion and help prevent localized overheating that can lower power output.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimizes heat transfer to preserve horsepower and efficiency\u003c\/li\u003e\n  \u003cli\u003eControls scale and deposits to maintain coolant flow\u003c\/li\u003e\n  \u003cli\u003eProtects metal surfaces from corrosion that degrades performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this coolant work across different engine types and climates?\u003c\/h3\u003e\n\u003cp\u003eThe propylene glycol base and POAT chemistry make Star Cool compatible with most water-cooled gasoline and diesel engines while remaining biodegradable and low-toxicity. It provides freeze protection to -26°F and boilover resistance up to 265°F, suitable for varied seasonal conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for mixed fleets: cars, trucks, marine and RV engines\u003c\/li\u003e\n  \u003cli\u003ePre-mixed for instant use—no measuring or adding water\u003c\/li\u003e\n  \u003cli\u003eProtects against both freezing and overheating across climates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes Star Cool prevent leaks and extend service life?\u003c\/h3\u003e\n\u003cp\u003eStar Cool’s additive blend seals pinhole leaks and small cracks while offering extended corrosion protection that can lengthen coolant service intervals beyond typical OEM timelines. It’s formulated for extended protection without causing blockages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSeals minor leaks to reduce coolant loss and downtime\u003c\/li\u003e\n  \u003cli\u003ePOAT chemistry resists degradation for longer service life\u003c\/li\u003e\n  \u003cli\u003eDoes not promote clogging—compatible with existing coolant systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this coolant safely?\u003c\/h3\u003e\n\u003cp\u003eUse when the engine is cool; never remove a hot radiator cap. Flush the system if needed, then fill with the ready-to-use Star Cool, run the engine to purge air, and top off to the proper level. Follow the vehicle or engine manufacturer’s service manual for detailed procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect cooling system for leaks and worn parts before filling\u003c\/li\u003e\n  \u003cli\u003eFlush thoroughly with water if previous coolant or contaminants are present\u003c\/li\u003e\n  \u003cli\u003eFill to just below filler neck, run engine 5–10 minutes to release trapped air\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Star Cool is aimed at vehicle owners, fleet managers, boaters, and RV enthusiasts who want a dependable, ready-to-use coolant that simplifies maintenance while providing advanced corrosion control and broad climate protection. If you need an American-made, long-life coolant that meets or exceeds OEM standards and reduces the hassle of mixing, Star Cool is engineered for those priorities.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMAXIMUM ENGINE PERFORMANCE - Engineered with unique PCT additives to maintain optimal temperatures for peak horsepower and efficiency without compromising safety\u003c\/li\u003e\n  \u003cli\u003eEXTENDED SERVICE LIFE \u0026amp; ADVANCED PROTECTION - Surpasses OEM specifications with up to 2+ years of service, utilizing POAT technology for superior corrosion resistance and leak prevention\u003c\/li\u003e\n  \u003cli\u003eBIODEGRADABLE \u0026amp; DESIGNED FOR ALL ENGINES - Propylene glycol base ensures compatibility across all engine types without clogging, ideal for high-performance gas and diesel engines\u003c\/li\u003e\n  \u003cli\u003eYEAR-ROUND RELIABILITY - Offers protection against boilovers at 265°F and freezing down to -26°F, ready to use pre-mixed formula simplifies maintenance\u003c\/li\u003e\n  \u003cli\u003eCOMPATIBLE WITH ALL COOLANTS - Versatile for topping off or complete flush and fill, seals pinhole leaks and small fissures to enhance cooling system integrity\u003c\/li\u003e\n  \u003cli\u003eMEETS \u0026amp; EXCEEDS INDUSTRY STANDARDS - Meets all OEM and ASTM specifications, ensuring reliability and performance across all 50 states\u003c\/li\u003e\n  \u003cli\u003ePROUDLY AMERICAN, TRUSTED GLOBALLY - Star brite, makers of Star Tron is a leader in marine, auto, RV, and home care since 1973, made in the USA for unmatched quality and performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Star Cool ready to use or do I need to mix it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Star Cool comes premixed with de-ionized water and is ready to use—do not add water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this coolant work in both gasoline and diesel engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The propylene glycol base and POAT additives are compatible with most gas and diesel water-cooled engines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"STAR BRITE","offers":[{"title":"Default Title","offer_id":67587518890169,"sku":"B00BNPI06C","price":117.13,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/star-brite-star-cool-front-bottle.jpg?v=1790511571"},{"product_id":"engine-ice-sxs-atv-coolant-antifreeze-0-5-gal-rtu-propylene-glycol-low-temp-protection","title":"Engine Ice SXS\/ATV Coolant \u0026 Antifreeze 0.5 gal RTU — Propylene Glycol, Low-Temp Protection","description":"\u003cstrong\u003eEngine Ice Hi-Performance SXS\/ATV Coolant + Antifreeze (0.5 gal) is a ready-to-use, phosphate-free coolant formulated with propylene glycol and OAT technology to lower operating temperatures and protect engines in off-road vehicles.\u003c\/strong\u003e\n\n\u003cp\u003eThis half-gallon bottle is premixed with deionized water for out-of-the-bottle use, designed to meet the thermal demands of side-by-sides, ATVs, quads and other powersports machines. Engine Ice balances freeze protection down to about -28°F and maintains boil-over resistance around 256°F while focusing on improved heat dispersion so high-revving off-road engines run cooler under load.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant reduce operating temperatures for SXS and ATV use?\u003c\/h3\u003e\n\u003cp\u003eEngine Ice improves heat transfer and disperses engine heat more efficiently than many conventional coolants. By using a propylene glycol base combined with OAT (organic acid technology), it lowers steady-state operating temperatures, helping engines resist heat soak during extended or heavy-duty riding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAverage reduction of 10–20°F in operating temperature versus standard coolants.\u003c\/li\u003e\n  \u003cli\u003eAdvanced heat-dispersing formulation for sustained high-RPM operation.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent power loss from excessive engine heat in demanding conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this coolant ready to use, and what protection levels does it offer?\u003c\/h3\u003e\n\u003cp\u003eYes — the product is premixed with deionized water and sold RTU (ready-to-use), so no dilution is required. It provides freeze protection to approximately -28°F and keeps boil-over temperatures near 256°F, giving wide seasonal coverage for powersports applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremixed for immediate use—no mixing or measuring needed.\u003c\/li\u003e\n  \u003cli\u003eFreeze protection to around -28°F for cold starts and storage.\u003c\/li\u003e\n  \u003cli\u003eBoil-over resistance near 256°F for hot running conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is inside the formula, and is it safe for my vehicle?\u003c\/h3\u003e\n\u003cp\u003eEngine Ice Hi-Performance coolant uses propylene glycol rather than ethylene glycol and incorporates OAT corrosion inhibitors while remaining phosphate-free. The formulation is designed for compatibility with typical SXS\/ATV cooling components and helps protect against corrosion when used as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePropylene glycol base—lower toxicity alternative commonly used in powersports.\u003c\/li\u003e\n  \u003cli\u003eOAT (organic acid technology) inhibitors for long-term corrosion control.\u003c\/li\u003e\n  \u003cli\u003ePhosphate-free to reduce deposit formation and maintain heat transfer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use and maintain in the field?\u003c\/h3\u003e\n\u003cp\u003eBecause the coolant is premixed and RTU, topping off or refilling a small cooling system is quick and clean—ideal for trailside maintenance or garage service. Its stability and reduced deposit potential help minimize routine flushing frequency when following manufacturer service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOut-of-the-bottle application—no onsite mixing required.\u003c\/li\u003e\n  \u003cli\u003eSmaller 0.5 gal size fits storage and transport for trail kits.\u003c\/li\u003e\n  \u003cli\u003eImproved heat dispersion reduces the need for emergency interventions from overheating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders and technicians who push off-road machines hard—recreational racers, trail riders, weekend explorers and service shops—will benefit from a coolant focused on temperature control and component protection. Engine Ice Hi-Performance SXS\/ATV Coolant is especially useful for high-rev applications and machines that operate under heavy load or in hot environments, and for anyone who wants a premixed, phosphate-free formula engineered for powersports cooling systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to dilute Engine Ice Hi-Performance coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it comes premixed with deionized water and is ready to use straight from the bottle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this coolant safe for ATV and SXS cooling systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it uses propylene glycol and OAT inhibitors and is formulated for powersports cooling components when used as directed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Engine Ice","offers":[{"title":"Default Title","offer_id":67588381540537,"sku":"B09GD13GFK","price":90.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/engine-ice-front-bottle-0-5gal.jpg?v=1790518311"},{"product_id":"peak-oet-red-pink-concentrate-antifreeze-coolant-for-asian-vehicles-1-gallon-poat-corrosion-protection","title":"PEAK OET Red\/Pink Concentrate Antifreeze Coolant for Asian Vehicles — 1 Gallon, POAT Corrosion Protection","description":"\u003cp\u003e\u003cstrong\u003ePEAK OET Red\/Pink Concentrate is a phosphate-enhanced POAT antifreeze formulated for Asian vehicles that require a red\/pink solution, supplied as a 1-gallon concentrated coolant for flushing, filling, or topping off.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned to meet the coolant needs of many Toyota, Lexus and Scion models, this concentrated formula mixes with water to create a factory-compatible coolant that helps protect engine cooling systems from corrosion and scale. The concentrate is compatible with other extended-life antifreeze\/coolants, includes a bittering agent for safety, and is intended for use when a phosphate-enhanced Organic Acid Technology (POAT) red or pink coolant is specified.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does this coolant protect against?\u003c\/h3\u003e\n\u003cp\u003eThis formulation focuses on preventing corrosion and deposit buildup that can shorten component life in cooling systems. It uses a blend of inhibitors tailored for metals and alloys commonly found in Asian-made engines and radiators.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion inhibitors for aluminum, cast iron and soldered joints\u003c\/li\u003e\n  \u003cli\u003eScale and deposit reduction to maintain heat transfer\u003c\/li\u003e\n  \u003cli\u003eCompatibility with water pump seals and hoses when mixed correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I mix and use the concentrate?\u003c\/h3\u003e\n\u003cp\u003ePEAK OET comes as a concentrate so you must dilute it with the correct ratio of distilled or deionized water to achieve the recommended freeze\/boil performance. Follow the vehicle manufacturer’s dilution guidance, and use it during a full flush and fill or to top off an already compatible system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical mix: 50\/50 concentrate-to-water for balanced freeze\/boil protection (verify vehicle specs)\u003c\/li\u003e\n  \u003cli\u003eUse distilled or deionized water to avoid mineral deposits\u003c\/li\u003e\n  \u003cli\u003ePerform a complete system flush before switching coolant types when required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this coolant right for my car model?\u003c\/h3\u003e\n\u003cp\u003ePEAK OET Red\/Pink is formulated to match the red\/pink phosphate-enhanced POAT specification used in many Toyota, Lexus and Scion vehicles. Always check your owner’s manual or dealer guidance to confirm the required coolant type and color code for your exact year and engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended where manufacturers specify red\/pink POAT coolants\u003c\/li\u003e\n  \u003cli\u003eNot appropriate for systems that require hybrid or silicate-free formulas unless explicitly allowed\u003c\/li\u003e\n  \u003cli\u003eCompatible with other extended-life antifreeze products, but follow mixing guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty or service life can I expect?\u003c\/h3\u003e\n\u003cp\u003eWhen installed as part of a full flush and refill following the vehicle maker’s procedures, PEAK guarantees service-life protection up to 150,000 miles or 5 years. This guarantee applies under normal use and proper installation; keep service records and use recommended dilution ratios.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGuaranteed protection: up to 150,000 miles or 5 years with proper flush\/fill\u003c\/li\u003e\n  \u003cli\u003eIncludes Denatonium Benzoate bittering agent for safety against accidental ingestion\u003c\/li\u003e\n  \u003cli\u003eStore in a cool, dry place and keep container sealed between uses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? PEAK OET Red\/Pink Concentrate is aimed at owners and technicians working on Toyota, Lexus and Scion vehicles that call for a phosphate-enhanced red or pink POAT coolant. It suits DIY mechanics performing maintenance, professional shops completing flush-and-fill services, and anyone who needs a concentrated, extended-life coolant compatible with common Asian vehicle cooling system materials. Verify your vehicle’s coolant color and specification before changing fluids, and follow the manufacturer’s instructions for mixing and replacement intervals.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix PEAK OET with regular green antifreeze?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mixing with different coolant chemistries is not recommended; match POAT red\/pink types or consult your vehicle manual to avoid compatibility issues.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does this coolant last after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: When installed after a complete flush and fill, PEAK guarantees protection up to 150,000 miles or 5 years under proper use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67588627562681,"sku":"B08PN828CY","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-oet-front-label.jpg?v=1790521392"},{"product_id":"engine-ice-off-road-motorcycle-coolant-blue-premixed-high-performance-propylene-glycol","title":"Engine Ice Off-Road Motorcycle Coolant Blue — Premixed High-Performance Propylene-Glycol","description":"\u003cp\u003e\u003cstrong\u003eEngine Ice Off-Road is a ready-to-use blue propylene-glycol motorcycle coolant and antifreeze formulated to lower operating temperatures and protect cooling systems in high-demand off-road and motorcycle engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for riders and off-road enthusiasts who push engines hard, this premixed coolant is designed to disperse heat efficiently while offering corrosion resistance and a safer, biodegradable formulation than many traditional ethylene-glycol products. It arrives ready to pour, eliminating mixing guesswork and helping maintain consistent engine temperatures to preserve performance under sustained loads.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant help my motorcycle run cooler?\u003c\/h3\u003e\n\u003cp\u003eEngine Ice Off-Road uses a formulation that improves heat transfer away from the engine and head, reducing hot spots that can rob power. Consistent temperature control helps engines maintain performance over long rides and aggressive use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnhanced heat dispersion to cut operating temperatures.\u003c\/li\u003e\n  \u003cli\u003ePropylene-glycol base that transfers heat efficiently.\u003c\/li\u003e\n  \u003cli\u003eStable performance during sustained high RPMs and steep climbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this product protect my cooling system components?\u003c\/h3\u003e\n\u003cp\u003eThe formula includes corrosion inhibitors to guard aluminum, copper, steel, and soldered joints commonly found in motorcycle and off-road radiators. Regular use helps prevent scale and rust buildup that can reduce cooling efficiency and cause component failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBroad-spectrum corrosion protection for multiple metals.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent cavitation and electrochemical erosion in pumps and heads.\u003c\/li\u003e\n  \u003cli\u003eReduces buildup that can clog passages and impair flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs Engine Ice Off-Road safe and easy to use?\u003c\/h3\u003e\n\u003cp\u003eYes — it ships premixed for immediate use, so there’s no measuring or diluting required. The propylene-glycol base is non-toxic and biodegradable, offering a safer alternative in environments where spills or runoff may occur.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremixed formula for straightforward refill and top-off.\u003c\/li\u003e\n  \u003cli\u003eBiodegradable and phosphate-free for reduced environmental impact.\u003c\/li\u003e\n  \u003cli\u003eNon-toxic base that minimizes hazard compared to ethylene glycol.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and conditions is this coolant best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis coolant is tailored for off-road motorcycles, dirt bikes, ATV\/UTV machines, and other high-stress small-displacement engines operating in hot or demanding conditions. It’s optimized for applications where heat control and component longevity are priorities.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-road motorcycles and dirt bikes exposed to heavy loads and heat.\u003c\/li\u003e\n  \u003cli\u003eATVs, UTVs, and similar recreational vehicles operating in rugged terrain.\u003c\/li\u003e\n  \u003cli\u003eAny liquid-cooled small engine where manufacturer compatibility allows propylene-glycol coolants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Engine Ice Off-Road is aimed at riders, mechanics, and off-road enthusiasts who need dependable temperature control and corrosion protection without the hassle of mixing. If you maintain high-revving motorcycles, spend long days in the dirt, or need a safer, ready-to-use coolant that helps preserve engine performance, this product is a practical choice. Always check your vehicle manufacturer’s coolant specifications before switching fluids.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to dilute Engine Ice Off-Road before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This coolant comes premixed and is ready to pour; no dilution required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Engine Ice Off-Road safe for all motorcycle metals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It offers broad corrosion protection for common metals like aluminum, copper, and steel, but always confirm compatibility with your manufacturer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Engine Ice","offers":[{"title":"Default Title","offer_id":67588649484473,"sku":"B0C9NYXHXW","price":96.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/engine-ice-off-road-front-packaging_a3bbf1ec-0c7c-4ad0-ba31-7649778d6ed0.jpg?v=1790521964"},{"product_id":"peak-oet-violet-si-oat-antifreeze-coolant-concentrate-1-gal-extended-life-corrosion-protection","title":"PEAK OET Violet Si‑OAT Antifreeze\/Coolant Concentrate 1 Gal — Extended‑Life, Corrosion Protection","description":"\u003cp\u003e\u003cstrong\u003ePEAK OET Extended Life Violet Concentrate is a silicate-enhanced organic acid technology (Si-OAT) antifreeze\/coolant concentrate formulated for many European vehicles that delivers long-life corrosion protection when mixed and installed per directions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis concentrated 1‑gallon coolant is designed to be diluted and used for flush-and-fill maintenance or topping off radiator systems on select Audi, Mercedes, Porsche, Volkswagen and other European makes that specify a violet Si‑OAT fluid. The formula contains corrosion inhibitors and a bittering agent (Denatonium Benzoate) to discourage accidental ingestion, and it’s engineered to be fully compatible with other extended-life coolants when mixed according to manufacturer guidance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich European vehicles can use this violet PEAK OET concentrate?\u003c\/h3\u003e\n\u003cp\u003eUse this product where the vehicle manufacturer calls for a violet, silicate‑enhanced organic acid technology coolant (Si‑OAT). It’s intended for many model years of Audi, Mercedes‑Benz, Porsche, VW and other European makes, but always check your owner’s manual or service guide first.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended where OEMs require violet Si‑OAT formulations\u003c\/li\u003e\n  \u003cli\u003eSuitable for cooling systems that accept extended‑life antifreeze\u003c\/li\u003e\n  \u003cli\u003eCan be used for flush-and-fill maintenance to meet long life intervals\u003c\/li\u003e\n  \u003cli\u003eNot a universal replacement—verify vehicle specifications before use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use this concentrate when servicing the cooling system?\u003c\/h3\u003e\n\u003cp\u003eThe product is a concentrate that must be mixed with the appropriate amount of water to reach the specified freeze\/boil protection for your vehicle. It works for complete flushes, fills, or as a top-off when compatible fluid is already present.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFollow manufacturer dilution ratios (commonly 50\/50 with distilled water unless vehicle specifies otherwise)\u003c\/li\u003e\n  \u003cli\u003ePerform a full system flush before filling to avoid mixing incompatible chemistries\u003c\/li\u003e\n  \u003cli\u003eUse as part of a complete flush-and-fill to qualify for long‑life protection coverage\u003c\/li\u003e\n  \u003cli\u003eObserve safe handling: avoid skin\/eye contact and keep out of reach of children\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and service life can I expect from PEAK OET Violet?\u003c\/h3\u003e\n\u003cp\u003eWhen installed correctly during a complete flush-and-fill service, this extended life coolant formulation helps protect cooling system metals and components from rust and corrosion over long service intervals. PEAK guarantees service coverage under stated conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulation helps guard against rust and corrosion across cooling components\u003c\/li\u003e\n  \u003cli\u003eContains silicate and organic acid inhibitors suited to European cooling systems\u003c\/li\u003e\n  \u003cli\u003eGuaranteed protection up to 150,000 miles or 5 years when installed per instructions\u003c\/li\u003e\n  \u003cli\u003eBittering agent Denatonium Benzoate added to reduce accidental ingestion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 1‑gallon PEAK OET Violet Concentrate is aimed at DIY enthusiasts, independent shops, and fleet technicians who maintain European cars that require a violet Si‑OAT antifreeze. It’s appropriate for anyone performing a complete coolant flush-and-fill or topping off with compatible extended life fluid. Before use, confirm your vehicle’s coolant specification and follow dilution and service procedures to ensure compatibility and to meet PEAK’s guaranteed protection terms.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this PEAK coolant ready to use straight from the bottle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. PEAK OET is a concentrate and must be diluted per your vehicle’s specified ratio, typically 50\/50 with distilled water unless otherwise directed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this work in non‑European cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It may be compatible if the vehicle calls for a silicate‑enhanced organic acid (Si‑OAT) violet coolant—always check the owner's manual before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67588651974841,"sku":"B08PN5ZVLH","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-oet-violet-front-label.jpg?v=1790522054"},{"product_id":"peak-violet-50-50-prediluted-antifreeze-coolant-for-european-cars-1-gal-si-oat-extended-life","title":"PEAK Violet 50\/50 Prediluted Antifreeze\/Coolant for European Cars, 1 Gal — Si‑OAT Extended Life","description":"\u003cp\u003e\u003cstrong\u003ePEAK OET Extended Life Violet 50\/50 prediluted antifreeze\/coolant is a silicate-enhanced organic acid technology (Si‑OAT) formula designed to protect European vehicle cooling systems for up to 150,000 miles or five years when installed during a full flush and fill.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 1‑gallon bottle arrives ready to use at a 50\/50 concentration, so it’s convenient for quick top‑offs and straightforward maintenance. Formulated specifically for European makes that require a violet Si‑OAT coolant, it contains corrosion inhibitors and a bittering agent (Denatonium Benzoate) to discourage accidental ingestion. Compatible with other extended life coolants, PEAK OET focuses on rust and corrosion prevention across aluminum and mixed‑metal systems commonly found in modern European engines.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does this antifreeze protect against inside my engine?\u003c\/h3\u003e\n\u003cp\u003ePEAK OET defends cooling system components from rust, scale and corrosion using a silicate‑enhanced organic acid inhibitor package. It stabilizes metal surfaces and helps maintain heat transfer efficiency over extended service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents rust and corrosion on radiators, water pumps and heater cores\u003c\/li\u003e\n  \u003cli\u003eFormulated for aluminum and mixed‑metal systems typical of European cars\u003c\/li\u003e\n  \u003cli\u003eHelps preserve coolant passages to maintain consistent engine temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this coolant ready to use or do I need to dilute it?\u003c\/h3\u003e\n\u003cp\u003eThe product is supplied prediluted at a 50\/50 ratio with deionized water and is ready to pour into the cooling system for topping off or refilling. That concentration balances freeze and boilover protection while providing optimal corrosion control for typical climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory‑prediluted—no additional water required for most applications\u003c\/li\u003e\n  \u003cli\u003eSuitable for quick top‑offs and standard refill procedures\u003c\/li\u003e\n  \u003cli\u003eProvides freeze\/boil protection consistent with a 50\/50 mix\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles is this antifreeze suited for?\u003c\/h3\u003e\n\u003cp\u003eThis violet Si‑OAT formula is tailored to many European makes and models that specify silicate‑enhanced organic acid technology. Always compare your vehicle manufacturer’s coolant specification and color coding before use to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended for certain Audi, Mercedes, Porsche and VW applications\u003c\/li\u003e\n  \u003cli\u003eDesigned for systems that call for violet Si‑OAT or extended life coolants\u003c\/li\u003e\n  \u003cli\u003eCompatible with other extended life antifreeze\/coolants when mixed per guidelines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will this coolant last once installed?\u003c\/h3\u003e\n\u003cp\u003eWhen installed as part of a complete cooling system flush and fill, PEAK guarantees service life protection up to 150,000 miles or five years. Routine checks between service intervals will help ensure the system maintains correct levels and performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGuaranteed up to 150,000 miles or 5 years after proper installation\u003c\/li\u003e\n  \u003cli\u003eBest results when paired with a full system flush and new coolant fill\u003c\/li\u003e\n  \u003cli\u003ePeriodic inspections recommended to verify level and condition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: PEAK OET Extended Life Violet 50\/50 prediluted antifreeze\/coolant is aimed at owners and technicians maintaining European vehicles that require a silicate‑enhanced OAT formula—particularly Audi, Mercedes, Porsche and VW models that call for violet coolant. It suits DIYers who prefer a ready‑to‑use 1‑gallon option for topping off or completing a coolant change, and professional shops that service mixed‑metal cooling systems needing extended protection and compatibility with other long‑life coolants. Always confirm your vehicle’s manufacturer coolant specifications before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix this PEAK OET coolant with other antifreeze types?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s compatible with other extended life coolants, but follow manufacturer guidance and consider a full system flush to avoid mixing incompatible chemistries.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to dilute the 1‑gallon PEAK OET product before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this product is prediluted 50\/50 and ready to use for topping off or refilling in most applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67588652040377,"sku":"B08PNN1YR8","price":102.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-oet-violet-1gal-front-label.jpg?v=1790522055"},{"product_id":"vaxxen-labs-instant-freeze-chilling-spray-professional-50-c-rapid-cooling-made-in-usa","title":"Vaxxen Labs Instant Freeze Chilling Spray — Professional -50°C Rapid Cooling, Made in USA","description":"\u003cp\u003e\u003cstrong\u003eVaxxen Labs Instant Freeze Chilling Spray is a professional-grade aerosol that cools surfaces rapidly to around -50 °C (-60 °F) for testing, repair, and diagnostic uses.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned and manufactured in the United States, this fast-acting spray delivers a precise, ultra-low temperature chill in seconds. Technicians and hobbyists use it where a sudden drop in temperature helps isolate faults, shrink materials for removal, or simulate cold conditions without complex refrigeration. The product is industrially formulated, identified by CAS number 811-97-2, and packaged for controlled, repeatable application.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly does the spray reach its advertised temperature?\u003c\/h3\u003e\n\u003cp\u003eThe formula is engineered to attain temperatures near -50 °C (-60 °F) within seconds of application to a small area. Actual cooling time depends on surface material, ambient temperature, and spray distance, so results vary with conditions. For consistent outcomes, apply short, controlled bursts rather than continuous spraying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical chill: down to -50 °C (-60 °F) in seconds on exposed surfaces\u003c\/li\u003e\n  \u003cli\u003eBest used with short trigger pulls for controlled cooling\u003c\/li\u003e\n  \u003cli\u003eCooling rate varies by substrate and environment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are common uses for this professional chilling spray?\u003c\/h3\u003e\n\u003cp\u003eThis product is versatile for electronic troubleshooting, mechanical shrink-fitting, adhesive softening, and lab work where rapid cooling is needed. It’s commonly used to identify faulty components by creating thermal stress or to contract parts for easier disassembly. Because it’s a portable aerosol, it replaces bulky refrigeration for localized tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCircuit board fault isolation and component testing\u003c\/li\u003e\n  \u003cli\u003eShrink-fit removal of press-fit parts and bearings\u003c\/li\u003e\n  \u003cli\u003eAdhesive brittleness testing and temporary adhesive softening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I apply the spray safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eHold the can at the recommended distance, apply brief pulses, and avoid prolonged continuous spraying to prevent surface damage or frost buildup. Use in a well-ventilated area and wear proper gloves and eye protection to prevent cold burns. Keep the can upright and follow all label warnings and local regulations for aerosol use and disposal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse short bursts at a distance to control chill area\u003c\/li\u003e\n  \u003cli\u003eWear protective gloves and eye protection to avoid frost injury\u003c\/li\u003e\n  \u003cli\u003eOperate in ventilated spaces and follow disposal instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat technical details and identifiers should I know?\u003c\/h3\u003e\n\u003cp\u003eThe spray is a professional-grade aerosol formulated to reach very low temperatures rapidly. It carries CAS number 811-97-2 for chemical identification and is produced in the USA to industrial quality standards. Packaging is designed for repeatable performance with a controlled spray pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade in the USA with industrial-grade formulation\u003c\/li\u003e\n  \u003cli\u003eCAS number: 811-97-2 for chemical reference\u003c\/li\u003e\n  \u003cli\u003eEngineered for repeatable, localized cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Vaxxen Labs Instant Freeze Chilling Spray is intended for technicians, lab personnel, engineers, repair shops, and advanced hobbyists who need a reliable, portable method to produce rapid, localized cold without refrigeration. If your work requires immediate temperature drops for diagnostics, shrink-fitting, or material testing, this aerosol provides a compact, professional solution; if you require medical or diagnostic use on people, consult appropriate regulated products and guidelines before proceeding.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this spray safe for electronics?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for brief, controlled use—apply short bursts and avoid moisture buildup; always power down devices first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature does it reach?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It can cool surfaces to about -50 °C (-60 °F) within seconds, depending on surface and conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Vaxxen Labs","offers":[{"title":"Default Title","offer_id":67588662001849,"sku":"B0BR64MNYP","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vaxxen-labs-instant-freeze-front-aerosol-can.jpg?v=1790522246"},{"product_id":"peak-oet-orange-concentrate-antifreeze-coolant-1-gal-oat-formula-extended-life-protection","title":"PEAK OET Orange Concentrate Antifreeze\/Coolant 1 Gal — OAT Formula, Extended-Life Protection","description":"\u003cp\u003e\u003cstrong\u003ePEAK OET Orange Concentrate Antifreeze\/Coolant is a 1-gallon, extended-life, orange organic acid technology (OAT) concentrate designed to protect North American engines from rust and corrosion when mixed and installed correctly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis concentrated formula from PEAK is formulated for vehicles that specify an orange OAT coolant—commonly Ford, Chrysler, and GM models—and is meant for flushing, filling, or topping off your vehicle's cooling system. It blends with compatible extended life antifreezes, includes a bittering agent (Denatonium Benzoate) to discourage accidental ingestion, and is backed by a service-life protection guarantee of up to 150,000 miles or five years when installed as part of a complete flush and fill.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use this concentrate properly?\u003c\/h3\u003e\n\u003cp\u003eMix the concentrate with distilled water at the ratio recommended by your vehicle manufacturer, typically 50\/50 for year-round protection. Perform a complete flush and fill to maximize corrosion protection and to activate the PEAK service-life guarantee.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShake container and measure concentrate accurately.\u003c\/li\u003e\n  \u003cli\u003eUse distilled water to avoid mineral deposits.\u003c\/li\u003e\n  \u003cli\u003eFlush cooling system before adding new mixture.\u003c\/li\u003e\n  \u003cli\u003eTop off and burp the system to remove air pockets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does it provide for engine cooling systems?\u003c\/h3\u003e\n\u003cp\u003ePEAK OET concentrate uses organic acid technology to help prevent rust and corrosion across engine cooling-system metals and components. Regular use after a proper installation helps maintain coolant integrity and component life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInhibits rust and corrosion on aluminum, iron, and other metals.\u003c\/li\u003e\n  \u003cli\u003eFormulated for seals and hoses compatibility in specified vehicles.\u003c\/li\u003e\n  \u003cli\u003eBittering agent added for safety against ingestion.\u003c\/li\u003e\n  \u003cli\u003eCompatible with other extended-life OAT coolants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and situations is this coolant intended for?\u003c\/h3\u003e\n\u003cp\u003eThis orange OET concentrate is targeted at North American vehicles that specify an orange organic acid technology coolant—frequently Ford, Chrysler, and GM models. It's suitable whenever you need to flush, refill, or top off the cooling system with a compatible extended-life product.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended for vehicles calling for orange OAT formulas.\u003c\/li\u003e\n  \u003cli\u003eIdeal when performing a full coolant system service or preventative maintenance.\u003c\/li\u003e\n  \u003cli\u003eWorks for engines requiring extended-life protection up to 150,000 miles.\u003c\/li\u003e\n  \u003cli\u003eNot intended for vehicles specifying conventional IAT or hybrid coolants unless approved.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty or guarantee comes with this product?\u003c\/h3\u003e\n\u003cp\u003ePEAK offers a service-life protection guarantee when the coolant is installed as part of a complete flush and fill according to the label and vehicle manufacturer instructions. The guarantee covers up to 150,000 miles or five years for cooling-system protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGuarantee applies only after a proper flush and fill procedure.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle manufacturer mixing ratios and service intervals.\u003c\/li\u003e\n  \u003cli\u003eKeep purchase and service records to validate the guarantee.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? PEAK OET Orange Concentrate Antifreeze\/Coolant is aimed at DIYers and professional technicians servicing North American cars and light trucks that require an orange OAT formula—particularly Ford, Chrysler, and GM owners who need a concentrated, extended-life option for flushing or refilling cooling systems. Choose this product if you want an OEM-compatible concentrate with corrosion inhibitors, a safety bittering agent, and a clear service-life guarantee when used with a proper system flush and fill.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can PEAK OET mix with other coolants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is compatible with other extended-life OAT coolants but avoid mixing with conventional (IAT) or hybrid types unless vehicle-approved.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mix ratio should I use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow your vehicle manufacturer's recommendation—commonly 50\/50 concentrate to distilled water for year-round protection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67588665475257,"sku":"B08PC7XZKY","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-oet-concentrate-front-label.jpg?v=1790522370"},{"product_id":"corsair-hydro-x-series-xl8-performance-coolant-1l-clear-pre-mixed-corrosion-anti-bacterial-protection","title":"Corsair Hydro X Series XL8 Performance Coolant, 1L Clear — Pre-mixed Corrosion \u0026 Anti-Bacterial Protection","description":"\u003cp\u003e\u003cstrong\u003eCORSAIR Hydro X Series XL8 Performance Coolant is a ready-to-use, pre-mixed clear fluid designed to protect and showcase custom PC liquid-cooling loops.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for custom water-cooling builders who want a dependable, visually neutral fluid, this 1-liter bottle of XL8 comes premixed from Taiwan with corrosion and antibacterial inhibitors added. It’s formulated to work with typical loop metals like copper, brass, and nickel while maintaining clarity that highlights your hardware or colored coolant channels.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant protect my custom loop?\u003c\/h3\u003e\n\u003cp\u003eThe XL8 formula contains multi-metal corrosion inhibitors and anti-bacterial agents that help reduce corrosion and biological growth inside the loop. That protection minimizes maintenance frequency and helps preserve the appearance and thermal contact surfaces of blocks and radiators.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports copper, brass, and nickel components\u003c\/li\u003e\n  \u003cli\u003eIncludes anti-corrosion inhibitors to slow metal degradation\u003c\/li\u003e\n  \u003cli\u003eContains antibacterial additives to reduce slime and biofilm\u003c\/li\u003e\n  \u003cli\u003ePre-mixed so inhibitors are properly balanced from first use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the coolant ready to use right out of the bottle?\u003c\/h3\u003e\n\u003cp\u003eYes — XL8 is sold pre-mixed and can be poured directly into your loop without adding concentrates or measuring additional additives. That simplifies setup and eliminates guesswork, particularly useful for first-time builders or when topping off existing loops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1L bottle sized for loop fills and top-offs\u003c\/li\u003e\n  \u003cli\u003ePre-mixed concentration avoids manual dilution errors\u003c\/li\u003e\n  \u003cli\u003eNo need for extra corrosion inhibitors or biocides\u003c\/li\u003e\n  \u003cli\u003eClear formulation keeps system appearance neutral\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill a clear coolant affect my build’s aesthetics?\u003c\/h3\u003e\n\u003cp\u003eClear XL8 keeps your loop visually neutral so component finishes, RGB lighting, or alternative colored coolants remain the focal point. It’s an ideal choice when you want an unobtrusive, transparent fluid that highlights fittings, tubing, and water blocks rather than adding color.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTranslucent clarity showcases hardware and lighting\u003c\/li\u003e\n  \u003cli\u003eWorks well with dyed or colored loop sections\u003c\/li\u003e\n  \u003cli\u003eNo cloudy residues to obscure details\u003c\/li\u003e\n  \u003cli\u003eEnhances polished or metallic build elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain and store XL8 Performance Coolant?\u003c\/h3\u003e\n\u003cp\u003eStore the bottle sealed at room temperature and avoid prolonged direct sunlight to maintain inhibitor effectiveness. When installed, monitor loop clarity and top off as needed; routine inspections every few months will catch any early discoloration or contamination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKeep bottle tightly closed between uses\u003c\/li\u003e\n  \u003cli\u003eAvoid high heat and direct UV exposure in storage\u003c\/li\u003e\n  \u003cli\u003eInspect loop visually every few months for clarity\u003c\/li\u003e\n  \u003cli\u003eUse the 1L bottle for fills and future top-offs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: CORSAIR XL8 Performance Coolant suits enthusiasts building or upgrading custom water-cooling loops who want a dependable, transparent fluid with built-in corrosion and antibacterial protection. It’s especially useful for builders prioritizing clear aesthetics, simple setup with no mixing, and compatibility with copper, brass, and nickel loop components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can XL8 be mixed with other coolants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mixing with other brands or concentrates is not recommended; use XL8 as supplied for balanced inhibitors and best results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this coolant compatible with my copper and nickel blocks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. XL8 is formulated to protect copper, brass, and nickel surfaces when used as directed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Corsair","offers":[{"title":"Default Title","offer_id":67588782260409,"sku":"B08L6QBWZ4","price":79.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/corsair-xl8-clear-bottle-front.jpg?v=1790524771"},{"product_id":"peak-oet-gold-antifreeze-coolant-concentrate-1-gal-hoat-formula-up-to-150-000-mi","title":"PEAK OET Gold Antifreeze\/Coolant Concentrate — 1 Gal HOAT Formula, Up to 150,000 mi","description":"\u003cstrong\u003ePEAK OET Gold Concentrate is a one-gallon, HOAT antifreeze\/coolant concentrate engineered for North American vehicles, offering long-life protection against rust and corrosion when mixed and installed as directed.\u003c\/strong\u003e\n\n\u003cp\u003eThis concentrated coolant is formulated to meet the hybrid organic acid technology (HOAT) requirements of many Ford and Chrysler vehicles while remaining compatible with other extended-life antifreeze products. Supplied as a one-gallon bottle with a bittering agent (Denatonium Benzoate) for safety, it can be used for a full flush-and-fill service, routine top-offs, or system maintenance. PEAK backs its performance with a protection guarantee—when installed following a complete flush and fill, it can provide up to 150,000 miles or five years of service life.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes this coolant suitable for North American Ford and Chrysler vehicles?\u003c\/h3\u003e\n\u003cp\u003ePEAK OET Gold Concentrate is blended to meet the HOAT chemistry requirements commonly specified by Ford and Chrysler, balancing organic corrosion inhibitors with silicate protection for certain engine components. It’s designed to be compatible with OEM recommendations where a gold or yellow HOAT coolant is specified.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulated to HOAT specifications for targeted compatibility.\u003c\/li\u003e\n  \u003cli\u003eRecommended for Ford and Chrysler models requiring gold hybrid OAT chemistry.\u003c\/li\u003e\n  \u003cli\u003eConcentrated form allows correct mixing ratios per manufacturer guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this product protect an engine cooling system?\u003c\/h3\u003e\n\u003cp\u003eThe advanced inhibitor package reduces oxidation, scale and electrochemical corrosion across aluminum and other metallic parts inside the cooling system. Regularly using the product as part of scheduled maintenance helps maintain heat transfer efficiency and component longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents rust and corrosion on radiators, water pumps, and heaters.\u003c\/li\u003e\n  \u003cli\u003eMaintains effective heat transfer for consistent engine temperatures.\u003c\/li\u003e\n  \u003cli\u003eIncludes additives that help control deposits and scaling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use the PEAK OET Gold Concentrate for best results?\u003c\/h3\u003e\n\u003cp\u003eMix the concentrate with distilled water at the manufacturer-recommended ratio before adding to the cooling system, or follow vehicle-specific guidance. For the guaranteed protection period, install the coolant only as part of a complete flush-and-fill service to remove old fluid and contaminants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse correct dilution—typically 50\/50 unless vehicle instructions state otherwise.\u003c\/li\u003e\n  \u003cli\u003ePerform a full flush and fill to activate the warranty coverage (up to 150,000 miles\/5 years).\u003c\/li\u003e\n  \u003cli\u003eSuitable for topping off between services if mixed to spec.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product safe to handle and store?\u003c\/h3\u003e\n\u003cp\u003eThe formula includes Denatonium Benzoate, a bittering agent to discourage accidental ingestion, and should be stored capped and out of reach of children and pets. As with all automotive fluids, avoid skin contact and dispose of used coolant in accordance with local regulations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBittering agent added for safety to reduce ingestion risk.\u003c\/li\u003e\n  \u003cli\u003eStore in a cool, dry place away from direct sunlight and heat sources.\u003c\/li\u003e\n  \u003cli\u003eHandle with gloves and use appropriate spill containment when pouring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: PEAK OET Gold Concentrate Antifreeze\/Coolant is aimed at owners and service technicians of North American vehicles—especially Ford and Chrysler models—that require a gold HOAT formula, plus DIYers who perform flush-and-fill maintenance. It’s also well suited for fleets and repair shops that need a concentrated, compatible coolant to mix to specification and back with a clear service-life guarantee when installed correctly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix PEAK OET Gold with other antifreeze brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s compatible with other extended-life antifreeze\/coolants, but follow manufacturer mix ratios and vehicle requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What dilution should I use for freezing protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use manufacturer-recommended dilution—commonly 50\/50 with distilled water—for typical freeze and boil protection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67588809064633,"sku":"B08PCBGGCL","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-oet-gold-front-label.jpg?v=1790525396"},{"product_id":"peak-oet-extended-life-green-antifreeze-concentrate-1-gal-poat-corrosion-protection-for-asian-vehicles","title":"PEAK OET Extended Life Green Antifreeze Concentrate 1 Gal — POAT Corrosion Protection for Asian Vehicles","description":"\u003cp\u003e\u003cstrong\u003ePEAK OET Extended Life Green Concentrate is a phosphate-enhanced organic acid technology (POAT) antifreeze\/coolant formulated for many Asian vehicles and sold as a 1‑gallon concentrated bottle for flushing, filling, or topping off cooling systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis concentrated green coolant from PEAK is designed specifically to meet the corrosion-protection needs of Asian makes that specify a phosphate-enhanced OET\/POAT chemistry. It is sold as a one-gallon bottle to be mixed with water to the appropriate concentration for your vehicle — useful for full system fills after a flush or for periodic top-offs. The formula includes a bittering agent (Denatonium Benzoate) and is compatible with other extended-life antifreeze\/coolants when mixed correctly.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles are compatible with this PEAK green POAT concentrate?\u003c\/h3\u003e\n\u003cp\u003eThis concentrate is intended for use in many Asian cars and light trucks that call for green, phosphate-enhanced organic acid technology coolants. Check your owner’s manual or coolant reservoir cap to confirm the manufacturer specification before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended for Hyundai, Kia, Genesis, Infiniti, Nissan, Mazda, Mitsubishi, Subaru, and Suzuki models.\u003c\/li\u003e\n  \u003cli\u003eSuitable when the vehicle specification requires a green POAT\/OET-type coolant.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for vehicles specifying pure OAT, HOAT without phosphate, or specific OEM-branded formulas unless cross-referenced.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use this concentrate during service or top-off?\u003c\/h3\u003e\n\u003cp\u003eThe product is sold as a concentrate and must be diluted to the recommended mix ratio for proper freeze and boil protection. It works for complete flush-and-fill service as well as for topping off between services when used at the correct concentration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse distilled or deionized water when diluting to avoid mineral deposits.\u003c\/li\u003e\n  \u003cli\u003eFollow your vehicle’s specified coolant-to-water ratio (commonly 50\/50) for freeze\/boil protection.\u003c\/li\u003e\n  \u003cli\u003ePerform a full flush and fill per manufacturer guidance to activate the extended-life protection and warranty conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does the formulation provide and are there safety notes?\u003c\/h3\u003e\n\u003cp\u003ePEAK’s OET POAT concentrate is formulated to inhibit rust and corrosion across cooling system metals and to maintain long-term protective additives when installed correctly. The bottle includes a bittering agent to discourage accidental ingestion; handle with typical automotive chemical safety practices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProtects water pump, radiator, heater core, and internal passages from corrosion.\u003c\/li\u003e\n  \u003cli\u003eContains Denatonium Benzoate as a safety bittering agent to deter ingestion.\u003c\/li\u003e\n  \u003cli\u003eUse gloves and eye protection; avoid mixing with incompatible chemistries without consulting manufacturer guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty or service life claims apply to this coolant?\u003c\/h3\u003e\n\u003cp\u003eWhen the PEAK product is installed as part of a complete flush and fill, the manufacturer guarantees service-life protection up to either 400,000 miles or 15 years. This coverage applies only under the terms specified by PEAK and proper installation procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eService-life coverage: up to 400,000 miles or 15 years when installed correctly as part of a full service.\u003c\/li\u003e\n  \u003cli\u003eRetention of extended-life inhibitor package depends on following dilution and replacement intervals.\u003c\/li\u003e\n  \u003cli\u003eKeep purchase records and service documentation to support warranty claims.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 1‑gallon PEAK OET Extended Life Green Concentrate is aimed at DIY mechanics, independent shops, and fleet maintainers who service Asian-brand vehicles requiring a phosphate-enhanced OET\/POAT coolant. It’s a practical choice for technicians needing a concentrated fluid for complete flush-and-fill jobs or for planned top-offs, provided they verify compatibility with the vehicle manufacturer’s coolant specification before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix PEAK OET concentrate with any coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only mix with compatible extended‑life antifreeze\/coolants; verify your vehicle needs a green POAT\/OET formula before combining.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What dilution ratio should I use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Dilute per your vehicle manual—typically 50\/50 coolant to water; use distilled water and follow manufacturer guidance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67588811391161,"sku":"B08PNCX971","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-oet-concentrate-front-label_68c4e9a3-76cd-4547-8d3d-5852c7f204be.jpg?v=1790525415"},{"product_id":"peak-oet-purple-antifreeze-coolant-concentrate-1-gal-oat-protection-for-aluminum-and-mixed-metal-engines","title":"PEAK OET Purple Antifreeze\/Coolant Concentrate 1 gal — OAT protection for aluminum and mixed‑metal engines","description":"\u003cp\u003e\u003cstrong\u003ePEAK OET Purple Concentrate is a 1‑gallon organic‑acid‑technology (OAT) antifreeze\/coolant concentrate formulated for modern North American engines that require a purple OAT coolant.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis concentrated formula is designed for use during cooling‑system flushes, fills, or top‑offs on newer North American vehicles. It uses an ethylene‑glycol base blended with a balanced package of organic acid corrosion inhibitors to protect aluminum and other metals found in contemporary high‑performance engines. Mix to the manufacturer’s recommended concentration for freeze and boil protection and for the corrosion control that matches factory fill specifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does PEAK OET protect cooling‑system components?\u003c\/h3\u003e\n\u003cp\u003eThe OAT inhibitor blend targets corrosion on aluminum, iron, and mixed‑metal systems to help preserve water pumps, radiators, head gaskets, and heater cores. Because it mirrors the inhibitor technology used for many factory fills, it helps maintain the original protection level when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOrganic acid corrosion inhibitors compatible with modern engine materials\u003c\/li\u003e\n  \u003cli\u003eReduces rust and electrochemical wear that degrades components\u003c\/li\u003e\n  \u003cli\u003eMaintains protection when mixed at recommended ratios\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat service life and warranty coverage does it offer?\u003c\/h3\u003e\n\u003cp\u003eWhen applied as part of a complete flush and fill, PEAK guarantees extended‑life service life protection of up to 350,000 miles or up to 5 years. Proper installation, correct dilution, and following vehicle manufacturer service intervals are necessary to qualify for the extended service coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGuaranteed protection when installed during a complete flush and fill\u003c\/li\u003e\n  \u003cli\u003eService life guidance: up to 350,000 miles or up to 5 years\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle manufacturer instructions to maintain warranty eligibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use this concentrate in my vehicle?\u003c\/h3\u003e\n\u003cp\u003ePEAK OET is a concentrate intended to be mixed with water to reach the vehicle maker’s specified coolant concentration (commonly 50\/50 for freeze and boil protection). Use distilled water if possible, and always verify the required type and concentration for your specific make and model before topping off or refilling the system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMix concentrate with water to reach the manufacturer’s recommended ratio\u003c\/li\u003e\n  \u003cli\u003eUse during a full flush and fill for best long‑term protection\u003c\/li\u003e\n  \u003cli\u003eNot a direct‑fill—do not pour concentrate in without diluting unless instructed by manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and systems are compatible with PEAK OET Purple Concentrate?\u003c\/h3\u003e\n\u003cp\u003eThis product is formulated for modern North American vehicles, including many newer Alfa Romeo, Chrysler, Dodge, Fiat, Jeep, and RAM models that specify a purple OAT coolant. It was designed for high‑performance engines and mixed‑metal cooling systems commonly found in contemporary domestic and some European‑branded North American models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeant for North American vehicles specifying a purple OAT coolant\u003c\/li\u003e\n  \u003cli\u003eSuitable for mixed‑metal systems and high‑performance engines\u003c\/li\u003e\n  \u003cli\u003eConsult your owner’s manual to confirm compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: PEAK OET Purple Concentrate is intended for DIY mechanics, independent shops, and fleet service techs who perform coolant flushes and refills on modern North American vehicles that require a purple OAT formula. Choose this concentrate when you need a factory‑style corrosion inhibitor package and extended service life, and always follow your vehicle manufacturer’s coolant type and dilution recommendations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add PEAK OET concentrate directly to my radiator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. PEAK OET is a concentrate and should be mixed with water to the vehicle maker’s recommended ratio before adding to the cooling system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is PEAK OET compatible with all engine metals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s formulated with OAT inhibitors for mixed‑metal systems common in modern North American engines, but always confirm compatibility with your owner’s manual.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67588816830649,"sku":"B0DR3JMBHY","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-oet-front-label_501c5d62-691b-4dec-8878-e290ec54b711.jpg?v=1790525575"},{"product_id":"quicksilver-extended-life-coolant-antifreeze-50-50-pre-diluted-1-gallon-mercruiser-closed-cooling-up-to-5-year-protection","title":"Quicksilver Extended Life Coolant Antifreeze 50\/50 Pre-Diluted 1 Gallon — MerCruiser Closed Cooling, Up to 5-Year Protection","description":"\u003cp\u003e\u003cstrong\u003eQuicksilver 877770Q1 Extended Life Coolant\/Antifreeze is a pre-diluted 50\/50 ethylene glycol formula designed for MerCruiser closed cooling stern drive and inboard gasoline engines, offering extended protection without silicates or phosphates.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt by a brand with over six decades serving marine powerplants, this ready-to-use gallon helps protect closed cooling systems against freeze, boil-over and corrosion while simplifying maintenance. The product arrives pre-mixed with de-ionized water so you can pour it directly into compatible systems, and it’s engineered to meet marine OEM specifications for long-life performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and cooling systems is this coolant intended for?\u003c\/h3\u003e\n\u003cp\u003eThis formula is developed specifically for MerCruiser closed cooling systems used in stern drives and inboard gasoline engines, but it also works where conventional antifreeze compatibility is required. Always consult your engine owner’s manual to confirm compatibility before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for MerCruiser closed cooling stern drives and inboard gasoline engines\u003c\/li\u003e\n  \u003cli\u003eCompatible with many systems that accept conventional antifreeze\u003c\/li\u003e\n  \u003cli\u003eNot intended for open cooling systems unless specified by manufacturer\u003c\/li\u003e\n  \u003cli\u003eCheck OEM guidelines for exact application fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does the extended-life protection last and what standards does it meet?\u003c\/h3\u003e\n\u003cp\u003eThis coolant provides extended service life rated up to 5 years or 1,000 operating hours under recommended conditions. It’s formulated to meet established industry specifications so you get predictable, standardized protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended protection: up to 5 years or 1,000 operating hours\u003c\/li\u003e\n  \u003cli\u003eFormulated to meet ASTM D-3306 and ASTM D-4340 benchmarks\u003c\/li\u003e\n  \u003cli\u003eIdeal for seasonal maintenance intervals in marine environments\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist degradation over long service periods\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key chemical and handling attributes I should know?\u003c\/h3\u003e\n\u003cp\u003eThe coolant is ethylene glycol based and shipped pre-diluted 50\/50 with de-ionized water for immediate use, and it is free of silicates and phosphates to reduce deposit formation. It won’t gel in normal service ranges and is compatible with conventional antifreeze, simplifying topping-up or mixing in emergencies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEthylene glycol formula, pre-diluted 50\/50 with de-ionized water\u003c\/li\u003e\n  \u003cli\u003eSilicate- and phosphate-free to minimize deposits\u003c\/li\u003e\n  \u003cli\u003eWill not gel under expected operating conditions\u003c\/li\u003e\n  \u003cli\u003eCompatible with conventional antifreeze products for service flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and store this coolant safely?\u003c\/h3\u003e\n\u003cp\u003ePour directly into a compatible closed cooling system per your engine manufacturer’s instructions, and follow standard safety practices when handling automotive fluids. Store the sealed gallon in a cool, dry place away from direct sunlight and extreme temperatures to preserve performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse directly — no mixing required — for compatible closed systems\u003c\/li\u003e\n  \u003cli\u003eFollow engine manufacturer's fill and maintenance procedures\u003c\/li\u003e\n  \u003cli\u003eStore sealed container out of sunlight and away from freeze\/thaw cycles\u003c\/li\u003e\n  \u003cli\u003eDispose of used coolant per local environmental regulations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Quicksilver 877770Q1 is aimed at marine owners, boat technicians, and service shops that operate MerCruiser closed cooling stern drives or inboard gasoline engines and want a dependable, OEM-aligned coolant that reduces maintenance complexity. If you maintain seasonal vessels, operate in variable climates, or prefer a pre-mixed, extended-life product from a marine-focused brand, this ready-to-use gallon is designed to simplify service while meeting recognized performance standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this coolant safe to use straight from the bottle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s pre-diluted to a 50\/50 mix with de‑ionized water and ready to use in compatible closed cooling systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix this with other antifreeze brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s compatible with conventional antifreeze, but check the engine manual and prefer same-type products to avoid chemistry conflicts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Quicksilver","offers":[{"title":"Default Title","offer_id":67588863754425,"sku":"B00BO88OY6","price":98.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/quicksilver-packaging-front-1-gallon.jpg?v=1790526736"},{"product_id":"ultra-1plus-ultracool-green-50-50-antifreeze-coolant-1-gallon-ready-to-use-corrosion-protection","title":"ULTRA 1PLUS UltraCool Green 50\/50 Antifreeze Coolant 1 Gallon — Ready-to-Use, Corrosion Protection","description":"\u003cp\u003e\u003cstrong\u003eULTRA 1PLUS UltraCool Green 50\/50 Antifreeze Coolant is a ready-to-use, universal engine coolant that combines corrosion protection and boil-over resistance for automotive and heavy-duty diesel systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFormulated to meet ASTM D 3306 and ASTM D 4985 specifications, this 1-gallon 50\/50 mix arrives pre-diluted for immediate use in radiators and cooling systems. The phosphate-free, low-silicate chemistry reduces deposit risk while a high-quality defoamer protects hoses, plastics and gaskets. Compatible with most makes and models and blendable with other brands, UltraCool Green is designed for everyday service, seasonal maintenance and fleet use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does UltraCool Green protect my engine from corrosion and overheating?\u003c\/h3\u003e\n\u003cp\u003eThe formulation includes inhibitors that help limit rust and scale formation while offering reliable boil-over protection under normal operating temperatures. It balances freeze and boil points when used as a 50\/50 premix so the cooling system maintains stable thermal performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets ASTM D 3306 and D 4985 for passenger and heavy-duty engines\u003c\/li\u003e\n  \u003cli\u003eCorrosion inhibitors reduce metal pitting and electrochemical wear\u003c\/li\u003e\n  \u003cli\u003eReady-to-use 50\/50 concentration optimizes freeze\/boil protection\u003c\/li\u003e\n  \u003cli\u003eLow silicate and phosphate-free to limit deposits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this coolant in different vehicle types and mix it with other brands?\u003c\/h3\u003e\n\u003cp\u003eYes — UltraCool Green is a universal formula suitable for most automotive and heavy-duty diesel vehicles. It is compatible with other heavy-duty antifreeze\/coolant brands and colors, making it practical for topping off or topping up during maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for cars, trucks, SUVs and heavy-duty diesel engines\u003c\/li\u003e\n  \u003cli\u003eCompatible with other brands and coolant colors when mixed carefully\u003c\/li\u003e\n  \u003cli\u003eSuitable for mixed-fleet garages and general maintenance use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components of the cooling system benefit from this coolant?\u003c\/h3\u003e\n\u003cp\u003eUltraCool Green protects metal surfaces, as well as non-metal components like hoses, plastic reservoirs and gaskets, thanks to its non-aggressive defoamer system and balanced inhibitors. This helps extend service life of rubber and plastic parts while limiting foam-related heat transfer issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProtects aluminum, cast iron and other metals against corrosion\u003c\/li\u003e\n  \u003cli\u003eNon-harmful defoamer safeguards hoses, plastics and gaskets\u003c\/li\u003e\n  \u003cli\u003eReduces foam for more efficient heat transfer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use and store the 1-gallon UltraCool Green antifreeze?\u003c\/h3\u003e\n\u003cp\u003eAs a ready-to-use 50\/50 premix, pour directly into a cooled radiator or coolant reservoir following vehicle manufacturer instructions; no further dilution is required. Store the sealed container upright in a cool, dry place away from direct sunlight and extreme temperatures to preserve performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReady-to-use — do not dilute before filling\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle manufacturer fill and bleed procedures\u003c\/li\u003e\n  \u003cli\u003eStore sealed in a cool, shaded area to maintain shelf life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ULTRA 1PLUS UltraCool Green 50\/50 Antifreeze is intended for DIY motorists, fleet managers and professional technicians who need a dependable, universal coolant that’s safe for mixed fleets and common cooling system materials. It’s a practical choice if you want a pre-mixed, low-maintenance solution that meets industry standards and helps reduce corrosion and foam-related issues without introducing phosphate or high silicate levels.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this UltraCool Green premixed or concentrate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is a ready-to-use 50\/50 premix; do not dilute before filling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix UltraCool Green with other coolant brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s compatible with most heavy-duty antifreeze\/coolant brands and colors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ULTRA 1PLUS","offers":[{"title":"Default Title","offer_id":67588939088057,"sku":"B0C5JTNMQ6","price":90.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ultra-1plus-front-label-1gallon.jpg?v=1790528338"},{"product_id":"cyclemax-honda-hp-compatible-coolant-50-50-two-quart-pack-with-funnel-blue-type-2-aluminum-safe","title":"CYCLEMAX Honda HP Compatible Coolant 50\/50 Two-Quart Pack with Funnel — Blue Type‑2, Aluminum-Safe","description":"\u003cp\u003e\u003cstrong\u003eCYCLEMAX Two-Pack supplies two ready-to-use quarts of Honda HP 50\/50 coolant plus a disposable funnel for easy top-ups and system maintenance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis OEM-compatible coolant pack is formulated to match Honda's HP 50\/50 Blend (08C50-C321S02) and supersedes part -08CLA-999-0E0A8. The blue Type-2 formula is engineered for aluminum engine components and replaces older green formulations without mixing issues. Supplied as a 50\/50 antifreeze-to-water mix, the coolant arrives ready for immediate use and is designed to provide reliable freeze and boil protection for everyday driving and seasonal changes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant protect aluminum engine parts?\u003c\/h3\u003e\n\u003cp\u003eThe CYCLEMAX formula uses organic, non-abrasive corrosion inhibitors instead of silicates, which helps reduce abrasive wear on water pump seals and aluminum surfaces. This lowers the chance of sediment buildup while maintaining protection across cooling system metals and polymers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eType-2 blue chemistry suited for aluminum housings and blocks\u003c\/li\u003e\n  \u003cli\u003eOrganic inhibitors that guard against galvanic corrosion\u003c\/li\u003e\n  \u003cli\u003eDesigned to avoid abrasive silicate deposits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperature range and performance can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe mixture is pre-diluted to a 50\/50 ratio, giving usable freeze and boil safety without additional water mixing. At a standard 15 PSI cap, it protects down to about -34°F and resists boil-over to roughly 265°F, offering broad coverage for most climates and driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReady-to-use 50\/50 premix—no measuring needed\u003c\/li\u003e\n  \u003cli\u003eFreeze protection to approximately -34°F\u003c\/li\u003e\n  \u003cli\u003eBoiling resistance near 265°F at 15 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this coolant fully compatible with Honda specifications?\u003c\/h3\u003e\n\u003cp\u003eThis CYCLEMAX pack is designed specifically to match Honda HP 50\/50 Blend (08C50-C321S02) and is backward-compatible with the original green coolant. It can be used as a direct replacement in systems calling for Honda’s HP Type-2 formula without cross-contamination problems when following proper flush or top-up procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulated to replace Honda HP Type-2 and older green coolant\u003c\/li\u003e\n  \u003cli\u003eSupersedes OEM reference -08CLA-999-0E0A8\u003c\/li\u003e\n  \u003cli\u003eIdeal for top-ups or full coolant changes per manufacturer guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any safety or handling notes I should know?\u003c\/h3\u003e\n\u003cp\u003eThe product includes a bittering agent to discourage ingestion and contains ethylene glycol (43–49% by weight), so handle it with care and keep away from children and pets. Dispose of used coolant according to local hazardous-waste rules and avoid releasing it to the environment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContains 43–49% ethylene glycol—avoid ingestion and skin contact\u003c\/li\u003e\n  \u003cli\u003eIncludes a disposable funnel for cleaner pouring and reduced spills\u003c\/li\u003e\n  \u003cli\u003eFollow local regulations for used coolant disposal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Car owners, DIY mechanics, and professional shops servicing Honda models that specify HP Type-2 coolant will find this CYCLEMAX two-pack convenient. It’s ideal for seasonal coolant top-ups, complete system refills, or keeping a spare on hand for long trips—anyone who wants a ready-to-use, OEM-compatible coolant solution built for aluminum engines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this coolant straight from the bottle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It's a 50\/50 premix ready for direct use—no dilution needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with older green Honda coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Type-2 blue formula replaces the original green coolant and is designed for safe compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CYCLEMAX","offers":[{"title":"Default Title","offer_id":67588973756601,"sku":"B0CKWMPNWR","price":90.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/cyclemax-front-packaging-two-quarts.jpg?v=1790528782"},{"product_id":"ultra-1plus-orange-50-50-antifreeze-coolant-1-gallon-premixed-astm-compliant-corrosion-protection","title":"ULTRA 1PLUS Orange 50\/50 Antifreeze Coolant 1 Gallon — Premixed, ASTM‑Compliant Corrosion Protection","description":"\u003cp\u003e\u003cstrong\u003eULTRA 1PLUS UltraCool Orange 50\/50 Antifreeze Coolant 1 Gallon is a pre-mixed, ready-to-use orange coolant formulated to protect engines from corrosion and overheating across a wide range of vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis one-gallon bottle contains a universal 50\/50 premix designed for straightforward top-ups and cooling-system maintenance without measuring or diluting. The UltraCool formulation meets ASTM D 3306 and ASTM D 4985 specifications, giving compatibility with many automotive and heavy-duty diesel systems. Its low silicate level and phosphate-free chemistry focus on corrosion defense while the incorporated defoamer helps preserve hoses, plastics, and gaskets.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant simplify routine maintenance?\u003c\/h3\u003e\n\u003cp\u003eBecause it arrives pre-diluted at a 50\/50 ratio, there’s no need to mix concentrate with water before adding it to your radiator or overflow reservoir. That reduces the chance of incorrect dilution and speeds up service tasks, whether you’re doing a quick top-up or seasonal coolant refresh.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremixed 50\/50 ready for immediate use\u003c\/li\u003e\n  \u003cli\u003eOne-gallon size fits most maintenance intervals\u003c\/li\u003e\n  \u003cli\u003eClearly labeled for drop-in replacement\u003c\/li\u003e\n  \u003cli\u003eSaves time and eliminates measuring errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with my vehicle’s cooling system?\u003c\/h3\u003e\n\u003cp\u003eUltraCool is formulated as a universal coolant to meet common industry standards, helping it work with many passenger cars, light trucks, and heavy-duty diesel engines. It’s compatible with systems that require ASTM D 3306 or ASTM D 4985-compliant formulations and is suitable for both newer models and many vehicles built from 2000 and earlier.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets ASTM D 3306 and D 4985 standards\u003c\/li\u003e\n  \u003cli\u003eSafe for a wide range of metal and alloy components\u003c\/li\u003e\n  \u003cli\u003eDesigned for both automotive and heavy-duty applications\u003c\/li\u003e\n  \u003cli\u003eSuitable for vehicles new and older than 2000\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it protect engine parts from corrosion and damage?\u003c\/h3\u003e\n\u003cp\u003eThe formula uses a low silicate concentration and avoids phosphates, which reduces deposit risks while still providing robust corrosion inhibition. A dedicated defoamer minimizes foaming that can strip protection from surfaces and helps maintain coolant contact with engine parts for longer-lasting defense.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow silicate content to limit deposits\u003c\/li\u003e\n  \u003cli\u003ePhosphate-free corrosion inhibitors\u003c\/li\u003e\n  \u003cli\u003eDefoamer to protect hoses, gaskets, and plastics\u003c\/li\u003e\n  \u003cli\u003eBoil-over prevention properties for thermal stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits will I notice after switching to UltraCool?\u003c\/h3\u003e\n\u003cp\u003eExpect easier service routines and reliable cooling-system performance without frequent corrective topping. The orange color helps you identify fluid condition at a glance, and the balanced inhibitor package supports longer component life when used as part of regular maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVisible orange color for quick inspections\u003c\/li\u003e\n  \u003cli\u003eReduced need for premature coolant changes when maintained properly\u003c\/li\u003e\n  \u003cli\u003eMaintains compatibility with hoses and plastics to lower replacement costs\u003c\/li\u003e\n  \u003cli\u003eConvenient one-gallon packaging for garage use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? ULTRA 1PLUS UltraCool Orange 50\/50 Antifreeze Coolant is aimed at DIY vehicle owners, independent mechanics, and fleet maintenance teams who need a reliable, ready-to-use coolant that meets common industry standards. It’s a practical choice for anyone maintaining passenger cars, light trucks, or diesel equipment who wants to avoid mixing errors while providing corrosion protection and compatibility with a wide variety of cooling systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to dilute this coolant before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, ULTRA 1PLUS UltraCool is premixed at 50\/50 and ready to pour straight into the cooling system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with my older vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the formula meets common ASTM standards and is suitable for many vehicles, including models from 2000 and earlier.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ULTRA 1PLUS","offers":[{"title":"Default Title","offer_id":67588983161017,"sku":"B0C7HKK6GM","price":96.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ultra-1plus-front-label-1g-bottle.jpg?v=1790528809"},{"product_id":"star-brite-engine-coolant-star-cool-64-oz-pg-synthetic-ready-to-use-with-corrosion-leak-protection","title":"STAR BRITE Engine Coolant - Star-Cool 64 oz PG Synthetic, Ready-to-Use with Corrosion \u0026 Leak Protection","description":"\u003cp\u003e\u003cstrong\u003eSTAR BRITE Star-Cool Premium Synthetic PG Engine Coolant is a ready-to-use propylene-glycol antifreeze engineered to protect, cool, and extend engine life in gasoline and diesel applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eStar-Cool combines a propylene glycol base with advanced poly organic additive technology (POAT) to offer long-lasting corrosion protection, improved heat management, and leak mitigation without additional mixing—arriving pre-diluted with de-ionized water for immediate installation. Formulated to exceed OEM and ASTM standards, this 64 oz bottle is suited for routine top-offs, complete flush-and-fill jobs, and maintenance of high-performance and everyday engines alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Star-Cool protect my engine from corrosion and leaks?\u003c\/h3\u003e\n\u003cp\u003eStar-Cool uses POAT chemistry tailored to inhibit electrochemical attack across aluminum, cast iron, copper, and mixed-metal cooling systems. The formula also contains additives that help seal pinhole leaks and small cracks, reducing the need for emergency repairs and preserving coolant passages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePOAT inhibitors protect multi-metal systems from rust and pitting.\u003c\/li\u003e\n  \u003cli\u003eSealant components arrest pinhole leaks and small fissures.\u003c\/li\u003e\n  \u003cli\u003ePropylene glycol base reduces toxicity compared with ethylene glycol.\u003c\/li\u003e\n  \u003cli\u003eMeets OEM and ASTM benchmarks for long-term service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Star-Cool work in both gasoline and diesel engines?\u003c\/h3\u003e\n\u003cp\u003eYes—Star-Cool is formulated for compatibility with all water-cooled gasoline and diesel engines, including high-performance and heavy-duty applications. Its biodegradable propylene glycol carrier minimizes clogging and helps maintain flow through radiators, heaters, and intercoolers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for mixed-metal cooling systems commonly found in modern engines.\u003c\/li\u003e\n  \u003cli\u003ePre-mixed for immediate use—no on-site dilution required.\u003c\/li\u003e\n  \u003cli\u003eSuitable for marine, automotive, RV, and industrial water-cooled engines.\u003c\/li\u003e\n  \u003cli\u003eImproves heat transfer to help engines reach and hold optimal temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow effective is Star-Cool across temperature extremes?\u003c\/h3\u003e\n\u003cp\u003eStar-Cool delivers year-round reliability: it protects against boilovers up to 265°F and freeze damage down to -26°F when used as supplied. These limits help prevent overheating in hot climates and freezing-related cracking in cold conditions when properly maintained.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBoilover protection rated to 265°F for high-temperature stability.\u003c\/li\u003e\n  \u003cli\u003eFreeze protection to -26°F to reduce risk of coolant solidification.\u003c\/li\u003e\n  \u003cli\u003ePre-mixed with de-ionized water to ensure consistent freeze\/boil performance.\u003c\/li\u003e\n  \u003cli\u003eExtended service intervals—typically beyond standard OEM timelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow to install:\u003c\/strong\u003e Never remove the radiator cap when hot. Flush the cooling system per the engine manufacturer’s service manual or follow these general steps: inspect hoses and clamps, drain and flush with clean water, close drains, refill with Star-Cool (do not add water), run the engine to purge air and top off as needed, then tighten the radiator cap and check for leaks.\u003c\/p\u003e\n\n\u003cp\u003eWho is this product for? Star-Cool is aimed at vehicle owners, fleet managers, and marine enthusiasts who want a high-performance, low-toxicity coolant that simplifies maintenance while delivering long service life. If you maintain cars, trucks, boats, RVs, or small industrial engines and need a pre-mixed coolant that balances corrosion protection, leak mitigation, and wide-temperature resilience, this 64 oz STAR BRITE Star-Cool bottle is a practical, reliable choice.\u003c\/p\u003e\n\n\u003cp\u003eFeatures summary:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-mixed propylene glycol formula with POAT additives\u003c\/li\u003e\n  \u003cli\u003eProtection up to 265°F and down to -26°F\u003c\/li\u003e\n  \u003cli\u003eDesigned for gasoline and diesel, compatible with all coolants\u003c\/li\u003e\n  \u003cli\u003eSeals pinhole leaks and prevents corrosion for extended service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to dilute Star-Cool before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Star-Cool is pre-mixed with de-ionized water and ready to install—do not add water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Star-Cool safe for aluminum engine parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The POAT formula protects aluminum and other metals in mixed cooling systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"STAR BRITE","offers":[{"title":"Default Title","offer_id":67589018517689,"sku":"B007HIEHXY","price":85.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/star-brite-star-cool-front-label.jpg?v=1790528967"},{"product_id":"guohaoi-coolant-fluid-blue-1-gal-low-conductivity-welding-coolant-thermal-transfer-corrosion-resistance","title":"Guohaoi Coolant Fluid Blue 1 gal low-conductivity welding coolant — thermal transfer \u0026 corrosion resistance","description":"\u003cp\u003e\u003cstrong\u003eGuohaoi Coolant Fluid Blue 1GL is a low-conductivity coolant formulated for welding circulators and re-circulator systems used in plasma, MIG, TIG, resistance welding, and general industrial cooling applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis blue, ready-to-use coolant is engineered to manage heat in small to medium welding systems and industrial recirculating equipment. Its low electrical conductivity helps reduce the risk of stray current paths in sensitive welding processes while providing thermal transfer and corrosion resistance to components. The one-gallon container is convenient for top-offs, test benches, and service carts where accurate fluid compatibility and clean performance matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant work in welding circulator systems?\u003c\/h3\u003e\n\n\u003cp\u003eThe fluid circulates through heat exchangers, cooling plates, and torch consumables to remove process heat generated during welding. Its formulation balances thermal transfer and low ionic content so it performs without creating conductive paths that can interfere with welding arcs or sensors.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for continuous recirculation in small to medium systems\u003c\/li\u003e\n  \u003cli\u003eLow conductivity reduces electrical leakage risks near weld arcs\u003c\/li\u003e\n  \u003cli\u003eStays stable under typical welding temperatures and flow rates\u003c\/li\u003e\n  \u003cli\u003eCompatible with metal and polymer components commonly used in circulators\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat welding machines and applications is it recommended for?\u003c\/h3\u003e\n\n\u003cp\u003eThis coolant is recommended for plasma, MIG, TIG, and resistance welding equipment as well as general industrial recirculating setups. It suits both production floor stations and maintenance use where a reliable thermal medium is required.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlasma cutting and welding circulator loops\u003c\/li\u003e\n  \u003cli\u003eMIG and TIG water-cooled torches and heads\u003c\/li\u003e\n  \u003cli\u003eResistance welding machines and chill plates\u003c\/li\u003e\n  \u003cli\u003eIndustrial recirculators, test benches, and cooling carts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I handle, store, and top off the one-gallon container safely?\u003c\/h3\u003e\n\n\u003cp\u003eStore the one-gallon container in a cool, dry place away from direct sunlight and sources of ignition. Use proper funnels and strainers when topping off systems to keep the cooling loop clean, and follow workplace disposal rules for used or contaminated fluid.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eKeep container sealed when not in use to prevent contamination\u003c\/li\u003e\n  \u003cli\u003eUse clean dispensing equipment and filters during refills\u003c\/li\u003e\n  \u003cli\u003eObserve local regulations for disposal of spent coolant\u003c\/li\u003e\n  \u003cli\u003eWear basic PPE (gloves, eye protection) when handling fluids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits should I expect compared to generic fluids?\u003c\/h3\u003e\n\n\u003cp\u003eGuohaoi Coolant Fluid Blue focuses on maintaining low ionic content while delivering effective heat transfer for welding and recirculator equipment. You can expect cleaner systems and fewer conductivity-related issues than with unspecified or high-conductivity fluids.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCleaner circuits and reduced risk of electrochemical interaction\u003c\/li\u003e\n  \u003cli\u003eConsistent thermal management in welding cycles\u003c\/li\u003e\n  \u003cli\u003eFormulation aimed at compatibility with common system materials\u003c\/li\u003e\n  \u003cli\u003eConvenient one-gallon size for targeted maintenance tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technicians, shop managers, and maintenance teams who operate plasma, MIG, TIG, or resistance welding equipment — and anyone managing small to medium industrial recirculation systems — will find this one-gallon Guohaoi coolant useful for routine servicing and top-offs. It’s intended for users who need a low-conductivity, ready-to-use coolant that fits into established cooling loops and maintenance workflows without special mixing or extensive handling procedures.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this coolant ready to use or does it need dilution?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Guohaoi Coolant Fluid Blue 1GL is supplied ready to use; no dilution needed unless specified by your equipment manufacturer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this in both TIG and MIG welding circulators?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s recommended for TIG, MIG, plasma, and resistance welding circulator systems and general industrial recirculators.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Guohaoi","offers":[{"title":"Default Title","offer_id":67589790073017,"sku":"B076VRNXM9","price":88.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/guohaoi-coolant-fluid-blue-front-packaging.jpg?v=1790531908"},{"product_id":"mishimoto-liquid-chill-synthetic-engine-coolant-1-gal-orange-premixed-propylene-glycol-freeze-boil-protection","title":"Mishimoto Liquid Chill Synthetic Engine Coolant 1 Gal — Orange, Premixed Propylene Glycol, Freeze\/Boil Protection","description":"\u003cp\u003e\u003cstrong\u003eMishimoto Liquid Chill MMRA-LC-5050F is a ready-to-use, propylene-glycol–based synthetic engine coolant formulated to protect water-cooled gasoline and diesel engines from freezing, boiling, corrosion, and wear.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premixed orange coolant combines a nontoxic propylene glycol base with a tailored POAT (poly organic additive technology) package, offering long-term protection for modern cooling systems. It is supplied ready to pour in a one-gallon container and is engineered to meet demanding industry test requirements, making it suitable for a wide range of passenger cars, light trucks, and heavy-duty diesel equipment when used according to manufacturer guidelines.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Mishimoto Liquid Chill protect engines in extreme temperatures?\u003c\/h3\u003e\n\u003cp\u003eLiquid Chill is balanced to resist both high-temperature boil-over and low-temperature freezing, providing year-round coverage without additional mixing. Its formulation maintains thermal stability and system pressure tolerance, helping prevent overheating or freeze-related damage when used with a 15 psi cap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBoil-over protection up to 265°F (with correct system pressure)\u003c\/li\u003e\n  \u003cli\u003eFreeze protection down to -26°F (premixed with deionized water)\u003c\/li\u003e\n  \u003cli\u003eStable performance in prolonged high-heat situations\u003c\/li\u003e\n  \u003cli\u003eReady-to-use concentration eliminates mixing errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this coolant compatible with my vehicle and radiator materials?\u003c\/h3\u003e\n\u003cp\u003eLiquid Chill is formulated to be safe across mixed-metal cooling systems and is compatible with both gasoline and diesel engines. It meets or surpasses common coolant standards and passes industry tests used to gauge compatibility and corrosion control, but always check your owner’s manual for any manufacturer-specific requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for aluminum, cast iron, and other common radiator metals\u003c\/li\u003e\n  \u003cli\u003eSuitable for light-duty gasoline and heavy-duty diesel applications\u003c\/li\u003e\n  \u003cli\u003eMeets ASTM D6210 and ASTM D3306 performance markers\u003c\/li\u003e\n  \u003cli\u003ePremixed deionized water minimizes mineral deposits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will Mishimoto Liquid Chill last between service intervals?\u003c\/h3\u003e\n\u003cp\u003eThe POAT additive system is designed for extended service life compared with conventional coolants. While application-specific limits vary, this formula can offer years of protection under proper maintenance and use — consult your vehicle’s maintenance schedule to set replacement intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLight-duty gasoline applications: commonly 2+ years or ~250,000 miles in recommended scenarios\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty diesel applications: potential for 7+ years or ~750,000 miles in recommended scenarios\u003c\/li\u003e\n  \u003cli\u003eReplacement timing should follow vehicle manufacturer guidance\u003c\/li\u003e\n  \u003cli\u003ePremixed product reduces risk of dilution errors that shorten life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical benefits and features of choosing this premixed coolant?\u003c\/h3\u003e\n\u003cp\u003eAside from temperature protection, Liquid Chill focuses on reducing internal wear and slowing corrosion, helping preserve radiators, water pumps, and engine passages. The product comes ready-to-use and is backed by Mishimoto’s lifetime warranty, providing straightforward installation and long-term peace of mind when used as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces engine wear and inhibits corrosion for longer component life\u003c\/li\u003e\n  \u003cli\u003ePremixed for instant use—no measuring or distilled water required\u003c\/li\u003e\n  \u003cli\u003eWorks in all water-cooled engines and radiator types\u003c\/li\u003e\n  \u003cli\u003eCovered by Mishimoto Lifetime Warranty for eligible applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Mishimoto Liquid Chill MMRA-LC-5050F is intended for vehicle owners, fleet managers, and technicians who want a ready-to-use, long-lasting synthetic coolant compatible with a broad range of gasoline and diesel engines. It’s a practical choice for people replacing coolant, performing scheduled maintenance, or outfitting vehicles that operate in varied climates. Always confirm compatibility with your vehicle’s service manual and follow recommended service intervals for optimal results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Mishimoto Liquid Chill in both gasoline and diesel engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This premixed formula is compatible with most gasoline and diesel water-cooled engines; verify any model-specific requirements in your owner’s manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to mix this coolant with water before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The MMRA-LC-5050F comes premixed with deionized water and is ready to pour into your cooling system.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":67589809635513,"sku":"B00U2C1KP0","price":98.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/mishimoto-liquid-chill-front-label.jpg?v=1790532384"},{"product_id":"hot-shots-secret-red-antifreeze-coolant-1-gal-pre-diluted-ready-to-use-sca-boosted-corrosion-protection","title":"Hot Shot's Secret Red Antifreeze\/Coolant 1 Gal — Pre-Diluted Ready-to-Use, SCA-Boosted Corrosion Protection","description":"\u003cp\u003e\u003cstrong\u003eHot Shot's Secret Red Antifreeze\/Coolant 1 Gallon is a pre-diluted, red-colored engine coolant formulated with initial supplemental additives to protect cooling systems and work with both conventional and extended-life formulas.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis one-gallon container delivers ready-to-use red antifreeze designed for easy top-ups and scheduled coolant service. It comes pre-charged with the initial supplemental coolant additive (SCA), includes a bittering agent to discourage accidental ingestion, and is labeled as compatible with a range of conventional and extended-life coolant chemistries. Because it is pre-diluted, there’s no mixing with water required, which simplifies service and reduces the risk of incorrect dilution.\u003c\/p\u003e\n\n\u003ch3\u003eWhat protection does this coolant provide for my engine?\u003c\/h3\u003e\n\u003cp\u003eThis antifreeze helps control corrosion and overheating risks when used as part of routine cooling-system maintenance. The included initial SCA treatment supports metal protection in mixed-material cooling systems and the red formulation aligns with many manufacturer color codes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes initial supplemental coolant additive for metal protection\u003c\/li\u003e\n  \u003cli\u003eRed color helps identify service fluid type\u003c\/li\u003e\n  \u003cli\u003eFormulated to help reduce corrosion in aluminum and iron components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the 1-gallon pre-diluted product safely and correctly?\u003c\/h3\u003e\n\u003cp\u003eBecause this coolant arrives pre-diluted, you can pour it directly into the radiator or coolant reservoir once the engine is cool. Always follow vehicle manufacturer guidance for fill levels and systems that require concentrated versus pre-diluted fluids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePour directly into the cooling system after verifying engine is cool\u003c\/li\u003e\n  \u003cli\u003eCheck owner’s manual for color and concentration recommendations\u003c\/li\u003e\n  \u003cli\u003eTop up to the indicated level; dispose of any waste fluid responsibly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this antifreeze compatible with other coolant brands and extended-life systems?\u003c\/h3\u003e\n\u003cp\u003eYes — this product is formulated to be compatible with many conventional and extended-life coolant chemistries, making it suitable for mixed-service fleets or when topping up different brands. Still, verify compatibility for vehicles with specific OEM requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for broad compatibility across conventional and extended-life formulas\u003c\/li\u003e\n  \u003cli\u003eUseful for fleet service where multiple coolant types are present\u003c\/li\u003e\n  \u003cli\u003eConfirm compatibility with the vehicle manufacturer before long-term use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This one-gallon, pre-diluted Hot Shot's Secret red antifreeze is aimed at DIY mechanics, service shops, and fleet operators who need a convenient ready-to-use coolant for top-ups and routine maintenance. It’s particularly useful where red-colored coolants are specified, when a pre-charged initial SCA is preferred, or when quick, accurate refills are required without mixing concentrated concentrates.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I pour this pre-diluted coolant directly into my radiator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This product is pre-diluted for direct use, but always add when the engine is cool and follow your vehicle’s fill-level instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with extended-life coolants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s formulated to be compatible with many conventional and extended-life formulas, though you should confirm with your vehicle manufacturer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hot Shot's Secret","offers":[{"title":"Default Title","offer_id":67590480625849,"sku":"B019ZW7HUO","price":102.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/hot-shots-secret-red-antifreeze-front-gallon_jpg.jpg?v=1790534766"},{"product_id":"peak-antifreeze-coolant-concentrate-green-1-gal-low-silicate-iat-corrosion-protection","title":"PEAK Antifreeze\/Coolant Concentrate - Green 1 Gal, Low-Silicate IAT Corrosion Protection","description":"\u003cstrong\u003ePEAK OET Green Concentrate Antifreeze\/Coolant is a one-gallon, low-silicate IAT formula designed to protect and condition engine cooling systems in North American vehicles.\u003c\/strong\u003e\n\n\u003cp\u003eThis concentrated green antifreeze\/coolant is formulated for vehicles that specify a conventional inorganic additive technology (IAT) coolant. It mixes with water to form a long-lasting, corrosion-resistant solution that shields radiators, water pumps, hoses, and engine passages. The product includes a bittering agent (Denatonium Benzoate) for safety and is compatible with other green conventional antifreeze\/coolants.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles should use this PEAK green concentrate?\u003c\/h3\u003e\n\u003cp\u003eThis coolant is intended for North American makes that recommend a green, low-silicate IAT product. It’s appropriate for many Chrysler, Jeep, Dodge, Ford, Lincoln, Mercury, and GM models when the manufacturer calls for a conventional green antifreeze.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for vehicles requiring green IAT (low-silicate) formulas\u003c\/li\u003e\n  \u003cli\u003eRecommended by PEAK for Chrysler, Jeep, Dodge, Ford, GM families\u003c\/li\u003e\n  \u003cli\u003eNot for vehicles specifying OAT, HOAT, or other OEM-specific coolants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the concentrate protect my engine cooling system?\u003c\/h3\u003e\n\u003cp\u003ePEAK’s advanced formula reduces rust and corrosion across metal and alloy components inside the cooling circuit. When installed properly after a complete flush and fill, the coolant maintains protective performance for extended service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInhibitors form a protective film on metal surfaces to limit oxidation\u003c\/li\u003e\n  \u003cli\u003eHelps prevent scale and deposits that reduce heat transfer efficiency\u003c\/li\u003e\n  \u003cli\u003eIncludes Denatonium Benzoate to discourage accidental ingestion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the concentrated antifreeze for best results?\u003c\/h3\u003e\n\u003cp\u003eMix the concentrate with the correct ratio of water according to your vehicle’s service manual—typically a 50\/50 mix provides freeze and boil protection for most climates. For maximum warranty coverage, perform a complete system flush and fill before installing this product.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse distilled or deionized water to minimize mineral deposits\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle manufacturer dilution and maintenance intervals\u003c\/li\u003e\n  \u003cli\u003eAfter flushing, refill with the proper concentrate-to-water ratio\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat service life and guarantee does PEAK offer?\u003c\/h3\u003e\n\u003cp\u003eWhen applied as part of a full system flush and complete fill, PEAK guarantees protection up to 50,000 miles or 2 years. Regular inspection and maintaining proper coolant concentration and level help preserve the system and extend component life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eService coverage: up to 50,000 miles or 2 years with correct installation\u003c\/li\u003e\n  \u003cli\u003ePeriodic checks recommended to ensure concentration and level are maintained\u003c\/li\u003e\n  \u003cli\u003eCompatible with other green conventional antifreezes during top-offs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: PEAK OET Green Concentrate Antifreeze\/Coolant is best for DIYers, independent shops, and fleet managers who maintain North American vehicles that require a traditional green IAT coolant. It’s an economical one-gallon concentrate for flushing, filling, or topping off cooling systems where conventional green antifreeze is specified, offering corrosion protection and a manufacturer-backed service interval when installed properly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix PEAK OET Green with other antifreeze colors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can top off with other green conventional (IAT) antifreezes, but avoid mixing with OAT\/HOAT or manufacturer-specific formulas.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What dilution should I use for winter protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A 50\/50 mix with water is typical for freeze and boil protection; follow your vehicle manual for exact ratios.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67590704103609,"sku":"B08PC8NJJF","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-oet-green-concentrate-front-label.jpg?v=1790536057"},{"product_id":"ultra-1plus-ultracool-antifreeze-coolant-50-50-red-1-gallon-ready-to-use-corrosion-protection","title":"ULTRA 1PLUS UltraCool Antifreeze Coolant 50\/50 Red 1 Gallon — Ready-to-Use, Corrosion Protection","description":"\u003cp\u003e\u003cstrong\u003eUltraCool Antifreeze Coolant 50\/50 is a ready-to-use red engine coolant that protects cooling systems from corrosion, overheating, and freeze-related damage while fitting most cars and trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a single coolant to fill or top off multiple vehicles without mixing concentrate, ULTRA 1PLUS UltraCool offers a factory-blend 50\/50 solution. Engineered to meet common industry specifications, this red ready-to-use formula simplifies maintenance for passenger cars, light trucks, and many heavy-duty diesel applications. It minimizes the guesswork of dilution and reduces the risk of incorrect mixing while delivering corrosion inhibitors and a defoamer system to protect hoses, gaskets, and plastic components.\u003c\/p\u003e\n\n\u003ch3\u003eHow does UltraCool help prevent corrosion and engine wear?\u003c\/h3\u003e\n\u003cp\u003eUltraCool contains corrosion inhibitors formulated for broad engine compatibility and a low silicate, phosphate-free composition to reduce deposit formation. These inhibitors create a protective layer on metal surfaces to slow rust and electrochemical damage across different metals used in cooling systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow silicate and phosphate-free formulation to limit deposits\u003c\/li\u003e\n  \u003cli\u003eIndustry-standard inhibitor package for aluminum and steel parts\u003c\/li\u003e\n  \u003cli\u003eHelps protect water pumps, radiators, and heater cores\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this coolant compatible with my vehicle and existing coolant?\u003c\/h3\u003e\n\u003cp\u003eUltraCool 50\/50 is formulated to meet ASTM D3306 and ASTM D4985 standards, making it suitable for most automotive and many heavy-duty diesel cooling systems. Because it is a pre-mixed 50\/50 product, it is ideal for topping off systems or refilling after a flush, but always follow your vehicle manufacturer’s guidance when mixing different coolant technologies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReady-to-use 50\/50 mix eliminates dilution errors\u003c\/li\u003e\n  \u003cli\u003eCompatible with many domestic and import brands like Toyota, GM, BMW, Honda\u003c\/li\u003e\n  \u003cli\u003eMeets common ASTM standards for broad vehicle coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits will I notice after switching to UltraCool?\u003c\/h3\u003e\n\u003cp\u003eUsing a balanced, pre-mixed coolant reduces maintenance steps and helps maintain consistent protection against freezing, boiling, and corrosion. The included defoamer protects rubber and plastic parts, which can extend component life and reduce small leaks caused by degraded hoses or gaskets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImmediate protection—no on-site dilution required\u003c\/li\u003e\n  \u003cli\u003eReduced foaming protects seals and hoses from wear\u003c\/li\u003e\n  \u003cli\u003eHelps prevent boil-over and freeze-related issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and use this ready-to-use coolant safely?\u003c\/h3\u003e\n\u003cp\u003eStore UltraCool in a cool, dry place away from direct sunlight and extreme heat to preserve inhibitor effectiveness. When adding to a vehicle, ensure the engine is cool, follow manufacturer instructions, and dispose of old coolant responsibly at an approved recycling or hazardous-waste facility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKeep container sealed and stored at moderate temperatures\u003c\/li\u003e\n  \u003cli\u003eAdd only to cool engines; avoid mixing with unknown coolant types without professional guidance\u003c\/li\u003e\n  \u003cli\u003eRecycle used coolant at designated collection centers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ULTRA 1PLUS UltraCool Antifreeze Coolant 50\/50 is aimed at vehicle owners and fleet operators who want a simple, ready-made coolant that fits a wide range of models and reduces maintenance complexity. It’s a practical choice for DIY mechanics, repair shops, and service centers that require a universal, ASTM-compliant coolant for topping off or refilling passenger cars, light trucks, and many diesel engines without handling concentrates or measuring mixes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix UltraCool 50\/50 with other coolants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mixing is not recommended unless the other coolant matches the same chemistry; consult your vehicle manual or a technician to avoid incompatibilities.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this coolant safe for aluminum engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—UltraCool meets common ASTM specs and includes inhibitors suitable for aluminum and steel cooling system components.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ULTRA 1PLUS","offers":[{"title":"Default Title","offer_id":67590720356537,"sku":"B0C59M15BC","price":96.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ultra-1plus-front-label-1g_bec82bd2-49fb-45d7-8152-65ce0d520939.jpg?v=1790536756"},{"product_id":"4into1-type-2-motorcycle-coolant-50-50-blend-32-fl-oz-pre-mixed-blue-freeze-boil-protection","title":"4into1 Type-2 Motorcycle Coolant 50\/50 Blend 32 fl oz — Pre-mixed Blue, Freeze\/Boil Protection","description":"\u003cp\u003e\u003cstrong\u003eReady-to-use 50\/50 Type-2 HP motorcycle coolant in a 32 fl. oz. bottle that protects radiators from corrosion, freezes and boiling under typical riding conditions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Genuine Honda Type-2 \"Blue\" HP coolant is supplied as a pre-mixed 50\/50 formula designed for motorcycle radiators. It replaces older green formulas while keeping compatibility with systems requiring the newer Type-2 specification. The concentrate is formulated with a non-abrasive corrosion inhibitor and a safety bittering agent, giving a balance of freeze\/boil protection and system longevity without additional mixing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant protect my motorcycle's cooling system?\u003c\/h3\u003e\n\u003cp\u003eThe formula includes a non-abrasive corrosion inhibitor that helps limit rust and scale on metal surfaces inside the radiator and water pump. It maintains protective additives over time to reduce the risk of leaks and component wear in mixed-metal systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-abrasive inhibitor reduces corrosion on aluminum and steel parts.\u003c\/li\u003e\n  \u003cli\u003eBalanced chemistry to avoid harsh reactions with seals and hoses.\u003c\/li\u003e\n  \u003cli\u003eContains a bittering agent for safety around pets and people.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperature range does the Type-2 coolant handle?\u003c\/h3\u003e\n\u003cp\u003eThis 50\/50 blend is formulated to protect against freezing down to -34°F and to resist boiling up to 265°F at 15 PSI. Those ratings make it suitable for most motorcycle operating conditions, including cold starts and high-load riding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e-34°F freeze protection in a 50\/50 mix for winter storage and cold climates.\u003c\/li\u003e\n  \u003cli\u003e265°F boiling protection at 15 PSI for high-temperature engine operation.\u003c\/li\u003e\n  \u003cli\u003ePre-mixed, so you get the rated performance straight from the bottle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product compatible with my existing coolant?\u003c\/h3\u003e\n\u003cp\u003eType-2 \"Blue\" coolant is formulated to be compatible with and replace older green Honda coolants. However, for best results, drain and flush the cooling system if switching from a different coolant type to avoid dilution of inhibitors or chemical conflicts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% compatible with original green Honda formulations, per Type-2 specs.\u003c\/li\u003e\n  \u003cli\u003eRecommended system flush when changing coolant chemistry or color.\u003c\/li\u003e\n  \u003cli\u003eUse the pre-mixed 50\/50 bottle—no additional water or additives needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I store and handle the 32 fl. oz. bottle?\u003c\/h3\u003e\n\u003cp\u003eKeep the bottle tightly closed and stored in a cool, dry place away from direct sunlight. The product contains a bittering agent to discourage ingestion, but it should still be kept out of reach of children and pets and disposed of according to local regulations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore upright, away from heat and sunlight.\u003c\/li\u003e\n  \u003cli\u003eDispose of any unused coolant per local hazardous-waste rules.\u003c\/li\u003e\n  \u003cli\u003ePre-mixed 32 fl. oz. (0.946 L) fits most refill needs for small motorcycle systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, mechanics and small-engine technicians who want a convenient, OEM-compatible coolant that requires no mixing and delivers balanced freeze and boil protection for modern motorcycle radiators. It's a practical choice for Honda owners replacing older green coolant, anyone performing routine coolant service, or those looking for a ready-to-use, Type-2 formula that emphasizes corrosion control and system compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to dilute this 50\/50 coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This bottle is pre-mixed 50\/50 and ready to use—no additional water required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix this Type-2 coolant with my old green coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Type-2 is compatible with the original green Honda coolant, but a system flush is recommended when switching formulas.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"4into1","offers":[{"title":"Default Title","offer_id":67590791069881,"sku":"B0FXNVG967","price":75.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/4into1-honda-type-2-bottle-front.jpg?v=1790538025"},{"product_id":"valvoline-zerex-g30-50-50-antifreeze-coolant-1-gallon-violet-oat-protection","title":"Valvoline Zerex G30 50\/50 Antifreeze Coolant — 1 Gallon Violet OAT Protection","description":"\u003cp\u003e\u003cstrong\u003eZerex G30 50\/50 Ready-to-Use Antifreeze Coolant is a pre-mixed, OAT-based engine coolant by Valvoline designed to protect modern cooling systems from freezing, boiling, corrosion and deposits.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eZerex G30 from Valvoline is an OEM-approved, organic-acid-technology (OAT) antifreeze formulated for many domestic and import vehicles. Supplied ready-to-use in a 50\/50 dilution, this violet coolant is free of silicates, phosphates, amines, borates, nitrates and nitrites, and is engineered to maintain corrosion protection across aluminum and other metals while preserving gaskets, hoses and plastics.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and systems are compatible with Zerex G30?\u003c\/h3\u003e\n\u003cp\u003eZerex G30 is formulated to meet the coolant needs of a wide range of cars and light trucks, including many Chrysler, European Ford, Fiat, GM, Jaguar, Jeep, Land Rover and Volkswagen models. Always check your vehicle owner’s manual for manufacturer-specific coolant approvals before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-approved for many domestic and European applications\u003c\/li\u003e\n  \u003cli\u003eSafe for aluminum radiators and mixed-metal systems\u003c\/li\u003e\n  \u003cli\u003eSuitable for both topping off and full system flushes when specified\u003c\/li\u003e\n  \u003cli\u003eReady-to-use 50\/50 mix—no measuring or premixing required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the formulation protect against freeze, boil and corrosion risks?\u003c\/h3\u003e\n\u003cp\u003eZerex G30 combines an ethylene glycol base with organic acid corrosion inhibitors to defend against freezing, boiling and metal degradation. The 50\/50 premix offers winter freeze protection down to -34°F and summer anti-boil protection to 265°F (in a properly pressurized system), while OAT inhibitors help prevent scale and rust buildup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFreeze protection to -34°F and boil protection to 265°F (50\/50 mix)\u003c\/li\u003e\n  \u003cli\u003eOAT chemistry resists corrosion and scale on cooling system metals\u003c\/li\u003e\n  \u003cli\u003eSilicate- and phosphate-free to reduce deposit formation\u003c\/li\u003e\n  \u003cli\u003eContains denatonium benzoate bittering agent for safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Zerex G30 harm hoses, gaskets or vehicle finishes?\u003c\/h3\u003e\n\u003cp\u003eZerex G30 is formulated to be compatible with common elastomers and plastics used in modern cooling systems and is free of harsh additives that can accelerate wear. It is designed to maintain seal and hose integrity while minimizing risk to paint and external finishes if handled properly during service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContains additives that protect seals, hoses and plastics\u003c\/li\u003e\n  \u003cli\u003eNo amines, borates, nitrates or nitrites that can promote degradation\u003c\/li\u003e\n  \u003cli\u003eBatch-tested and fleet-proven for real-world durability\u003c\/li\u003e\n  \u003cli\u003eRecommended rinsing and safe handling to avoid external spills\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does protection last and what maintenance is recommended?\u003c\/h3\u003e\n\u003cp\u003eZerex G30 carries a performance expectation measured in service life rather than indefinite protection. Valvoline specifies long life intervals for this OAT coolant, and maintaining proper coolant concentration and system condition helps preserve protection for years and many miles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for extended service intervals; consult vehicle manual for exact schedules\u003c\/li\u003e\n  \u003cli\u003e5 year \/ 150,000 mile protection guideline for freeze\/boil-related failures\u003c\/li\u003e\n  \u003cli\u003eBest practice: inspect coolant and system components periodically for leaks or contamination\u003c\/li\u003e\n  \u003cli\u003eUse proper disposal or recycling methods for used coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Valvoline Zerex G30 50\/50 Ready-to-Use Antifreeze Coolant is aimed at car and light-truck owners, DIY mechanics and professional fleets driving vehicles that specify an OAT-style coolant. Choose this product when you need a pre-mixed, OEM-approved coolant that offers long-lasting corrosion protection, compatibility with aluminum components, and reliable freeze\/boil performance without the need to dilute or blend before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Zerex G30 be mixed with other coolants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mixing different coolant chemistries is not recommended; consult your owner’s manual and use compatible OAT coolants to avoid reduced protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Zerex G30 ready to use or do I need to dilute it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Zerex G30 comes pre-mixed at 50\/50 with deionized water and is ready to install without further dilution.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":67590805061817,"sku":"B08127G6TR","price":81.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/valvoline-zerex-g30-front-label.jpg?v=1790538250"},{"product_id":"trz-antifreeze-refractometer-4-in-1-ethylene-propylene-glycol-adblue-def-battery-sg-f-readout","title":"TRZ Antifreeze Refractometer 4-in-1 — Ethylene\/Propylene Glycol, AdBlue\/DEF \u0026 Battery SG, °F Readout","description":"\u003cb\u003eTRZ 4-in-1 Antifreeze Refractometer is a handheld optical tester that measures freezing point and concentration for ethylene glycol, propylene glycol, AdBlue\/DEF, and specific gravity for battery fluid.\u003c\/b\u003e\n\n\u003cp\u003eCompact and purpose-built for workshops, fleets, and maintenance technicians, this refractometer delivers quick numeric readings in °F so you can verify coolant freeze protection, AdBlue concentration, and battery electrolyte density without sending samples to a lab. It combines four testing functions into a single instrument and displays practical percentage or specific-gravity values that match the common ranges used in vehicle and industrial fluids.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TRZ refractometer determine antifreeze freeze protection?\u003c\/h3\u003e\n\u003cp\u003eThe device measures the refractive index of a coolant sample and converts that optical reading into a freezing-point temperature in °F and a volume-percent concentration. This helps you confirm whether ethylene glycol or propylene glycol mixtures will protect engines at expected ambient temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEthylene glycol freeze-point span: -84°F to 32°F, concentration 0–70% by volume\u003c\/li\u003e\n  \u003cli\u003ePropylene glycol freeze-point span: -60°F to 32°F, concentration 0–63% by volume\u003c\/li\u003e\n  \u003cli\u003eClear digital\/optical scale in °F for immediate interpretation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan it test AdBlue (DEF) reliably?\u003c\/h3\u003e\n\u003cp\u003eYes — the TRZ unit includes a calibrated scale for urea-based AdBlue\/DEF so you can confirm the solution is within the recommended concentration window. This prevents dosing errors and ensures the exhaust aftertreatment system receives the correct urea level.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdBlue\/DEF concentration detection: 30%–35% urea range\u003c\/li\u003e\n  \u003cli\u003eFast spot checks for bulk tanks, dispensers, or refill bottles\u003c\/li\u003e\n  \u003cli\u003eReduces guesswork when topping up selective catalytic reduction systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat about testing battery electrolyte or industrial fluids?\u003c\/h3\u003e\n\u003cp\u003eThe refractometer also measures the specific gravity range commonly used for industrial and some battery fluids, allowing quick verification of charge state or fluid condition. Readings help maintenance staff decide if topping up or servicing is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBattery specific gravity range: 1.100–1.400 sg\u003c\/li\u003e\n  \u003cli\u003eUseful for lead-acid battery checks and industrial fluid monitoring\u003c\/li\u003e\n  \u003cli\u003eSingle handheld tool reduces need for multiple testers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this tool fit into routine maintenance workflows?\u003c\/h3\u003e\n\u003cp\u003eBecause it outputs direct, easy-to-interpret results in °F and percent, technicians can integrate the refractometer into pre-season checks, fleet inspections, and preventative maintenance rounds. Its portability and fast sample-to-result time make on-the-spot decisions more efficient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImmediate readings speed up diagnostics and reduce downtime\u003c\/li\u003e\n  \u003cli\u003eSmall footprint for toolboxes, service vans, or meter benches\u003c\/li\u003e\n  \u003cli\u003eEliminates frequent lab testing for routine verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho this is for:\u003c\/strong\u003e The TRZ 4-in-1 Antifreeze Refractometer is designed for mechanics, fleet managers, agricultural and heavy-equipment operators, and facilities maintenance teams who need fast, accurate checks of coolant freeze protection, AdBlue concentration, and battery fluid density. If you perform seasonal coolant checks, manage DEF supplies, or inspect battery banks, this single instrument replaces multiple meters and offers clear, actionable readings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the refractometer show readings in Celsius?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This TRZ model displays results only in °F for freeze-point and concentration conversion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it test both ethylene and propylene glycol?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It measures freezing point and concentration for both ethylene glycol (0–70% vol) and propylene glycol (0–63% vol).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TRZ","offers":[{"title":"Default Title","offer_id":67590872629433,"sku":"B073Q2LSG9","price":66.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/trz-front-view-refractometer.jpg?v=1790538739"},{"product_id":"peak-extended-life-blue-antifreeze-coolant-concentrate-1-gal-poat-phosphate-enhanced","title":"PEAK Extended Life Blue Antifreeze\/Coolant Concentrate 1 Gal — POAT, Phosphate-Enhanced","description":"\u003cstrong\u003ePEAK OET Extended Life Blue Concentrate is a phosphate-enhanced, POAT antifreeze\/coolant concentrate formulated specifically for many Asian vehicle cooling systems.\u003c\/strong\u003e\n\n\u003cp\u003eThis one-gallon concentrate is designed to be mixed and used in place of factory blue POAT coolants in compatible vehicles. It combines organic acid technology with phosphate additives to reduce corrosion, protect aluminum and other metals, and extend service intervals when installed after a full flush and fill. The bottle also includes a bittering agent, Denatonium Benzoate, to discourage accidental ingestion.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles should use this blue PEAK OET antifreeze?\u003c\/h3\u003e\n\u003cp\u003ePEAK OET Extended Life Blue Concentrate is intended for Asian-market cars that specify a phosphate-enhanced POAT formula. It’s commonly recommended for models from Acura, Honda, Infiniti, Mitsubishi, Nissan, Subaru, and Suzuki where blue coolant is required by the manufacturer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Acura and Honda systems calling for blue POAT coolant.\u003c\/li\u003e\n  \u003cli\u003eSuitable for Infiniti and Nissan vehicles that require phosphate-enhanced formulations.\u003c\/li\u003e\n  \u003cli\u003eWorks with Mitsubishi, Subaru, and Suzuki models recommending blue long-life coolant.\u003c\/li\u003e\n  \u003cli\u003eCan be mixed with other extended-life antifreeze\/coolants formulated for the same chemistry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use this 1-gallon concentrate in my cooling system?\u003c\/h3\u003e\n\u003cp\u003eMix the concentrate with distilled water per your vehicle manufacturer’s dilution ratio—typically 50\/50 for freeze and boil-over protection. Install after performing a full system flush and fill to ensure the best corrosion protection and to meet the product’s guaranteed service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePerform a complete coolant flush before adding the new concentrate.\u003c\/li\u003e\n  \u003cli\u003eUse distilled water to avoid mineral deposits; follow the vehicle dilution recommendation.\u003c\/li\u003e\n  \u003cli\u003eTop off or refill the radiator and reservoir, then run the engine to purge air pockets.\u003c\/li\u003e\n  \u003cli\u003eCheck for leaks and reconfirm coolant level after the engine reaches normal temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and lifetime can I expect from PEAK OET Extended Life?\u003c\/h3\u003e\n\u003cp\u003eThis concentrated formula provides rust and corrosion protection across cooling system components and is engineered for extended service life when installed correctly. PEAK guarantees up to 150,000 miles or 5 years of protection when the product is used as part of a complete flush and fill.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps prevent rust and corrosion on aluminum, iron, and other metals.\u003c\/li\u003e\n  \u003cli\u003eFormulated to maintain cooling efficiency and reduce scale buildup.\u003c\/li\u003e\n  \u003cli\u003eService life guarantee: up to 150,000 miles or 5 years with proper installation.\u003c\/li\u003e\n  \u003cli\u003eIncludes Denatonium Benzoate to reduce ingestion risk during handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I mix this concentrate with other coolants or use it for topping off?\u003c\/h3\u003e\n\u003cp\u003eThe concentrate is compatible with other extended life antifreeze\/coolants that share the same POAT chemistry, but avoid mixing with incompatible formulas. It is suitable for topping off between full services, though a full flush and fill is recommended to achieve the guaranteed protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMixable with like-formulated extended-life POAT coolants.\u003c\/li\u003e\n  \u003cli\u003eNot recommended to mix with traditional IAT (inorganic) or incompatible OAT chemistries.\u003c\/li\u003e\n  \u003cli\u003eUse for topping off, but prioritize a full system flush for maximum benefit.\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer guidance if unsure about coolant compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: PEAK OET Extended Life Blue Concentrate is aimed at owners and technicians working on Asian-brand vehicles that specify a blue phosphate-enhanced POAT coolant. It’s a practical choice for DIY mechanics performing flush-and-fill maintenance, professional shops that service Honda, Nissan, Subaru and similar makes, and anyone seeking an extended-life cooling solution with a clear manufacturer usage guideline and mileage\/time guarantee. If your owner’s manual calls for a blue POAT coolant, this PEAK concentrate offers a factory-compatible option when used according to instructions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this coolant pre-mixed or concentrate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This is a 1-gallon concentrate that must be diluted with water per manufacturer dilution recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will PEAK OET work with my Honda or Nissan?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s formulated for many Acura, Honda, Infiniti, Nissan and other Asian vehicles that specify a blue POAT coolant.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67590945046713,"sku":"B08PNKLJV3","price":90.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-oet-concentrate-front-label_fb5fb2a4-e788-428d-b59d-84ed135b81aa.jpg?v=1790539326"},{"product_id":"peak-global-lifetime-antifreeze-coolant-concentrate-1-gal-amber-poat-corrosion-protection","title":"PEAK Global Lifetime Antifreeze \u0026 Coolant Concentrate 1 Gal Amber — POAT Corrosion Protection","description":"\u003cp\u003e\u003cstrong\u003ePEAK Global Lifetime Concentrate is a universal, phosphate-enhanced organic acid antifreeze and coolant designed to protect every passenger and truck cooling system for the life of the vehicle when properly maintained.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis one-gallon concentrate blends with water to form a long-lasting ethylene-glycol coolant that works across American, Asian, and European vehicles. Formulated with an advanced organic acid corrosion inhibitor system (POAT), it shields aluminum and other cooling-system metals from rust and corrosion without silicates, borates, nitrites or amines. The amber tint is safe for top-offs and won’t noticeably change the color of existing coolant.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant protect different engine metals?\u003c\/h3\u003e\n\u003cp\u003ePEAK Global Lifetime Concentrate employs stabilized phosphate-enhanced Organic Acid Technology to create a protective film on metal surfaces. That film helps prevent electrochemical corrosion and reduces scale formation, extending component life without abrasive additives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProtects aluminum, iron, steel and soldered joints in cooling systems\u003c\/li\u003e\n  \u003cli\u003eContains organic corrosion inhibitors that are non-abrasive\u003c\/li\u003e\n  \u003cli\u003eReduces the risk of pitting and galvanic corrosion over long service intervals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I mix this with my current antifreeze or use it for top-offs?\u003c\/h3\u003e\n\u003cp\u003eThis concentrate is designed for compatibility with most existing antifreeze formulations, so it can be used for top-offs or after a complete flush and fill. The amber color minimizes visual disruption in mixed systems, but for best long-term results, follow manufacturer mixing ratios and perform a full system service when indicated.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many OEM and aftermarket coolants for emergency top-offs\u003c\/li\u003e\n  \u003cli\u003eAvailable as concentrate for custom mixing or 50\/50 pre-diluted for convenience\u003c\/li\u003e\n  \u003cli\u003eRecommended to flush system when switching chemistries for maximum longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance schedule should I follow to get lifetime protection?\u003c\/h3\u003e\n\u003cp\u003eLifetime protection refers to the coolant’s ability to protect the cooling system for the vehicle’s lifetime when used with proper maintenance. Regular inspection, periodic coolant condition checks, and performing a full flush and refill according to the vehicle manufacturer will ensure continuous corrosion protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonitor coolant level and condition at routine service intervals\u003c\/li\u003e\n  \u003cli\u003ePerform a complete flush and refill when recommended by your vehicle maker\u003c\/li\u003e\n  \u003cli\u003eTop off with compatible concentrate or 50\/50 solution as needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product safe for heavy-duty trucks and high-mileage cars?\u003c\/h3\u003e\n\u003cp\u003eYes — the formula is formulated to meet performance needs across light, medium and heavy-duty applications. Its non-abrading organic inhibitor package helps protect older and high-mileage cooling systems as well as newer aluminum-intensive designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for passenger cars, SUVs, pickups and heavy-duty trucks\u003c\/li\u003e\n  \u003cli\u003eWorks with mixed-metal systems commonly found in modern engines\u003c\/li\u003e\n  \u003cli\u003eContains Denatonium Benzoate as a bittering agent to discourage accidental ingestion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: PEAK Global Lifetime Concentrate Antifreeze \u0026amp; Coolant is aimed at vehicle owners, fleet managers and technicians who want one coolant solution to cover multiple makes and models. It’s a practical choice for people who prefer concentrated coolant for custom mixing, shops that service diverse vehicles, and owners seeking long-term corrosion protection when maintenance guidelines are followed.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is PEAK Global Lifetime Concentrate compatible with my car's coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s formulated to be compatible with most American, Asian, and European coolants and is safe for top-offs, though a full flush is recommended when changing chemistries.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How should I mix the concentrate before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mix with clean water to the vehicle manufacturer’s recommended concentration—commonly 50\/50 for freeze and boil protection—unless you choose the pre-diluted option.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67590978502841,"sku":"B000CCIFZI","price":81.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-global-lifetime-front-label.jpg?v=1790539615"},{"product_id":"valvoline-zerex-g48-antifreeze-coolant-concentrate-1-gal-oat-aluminum-protection-long-life","title":"Valvoline Zerex G48 Antifreeze\/Coolant Concentrate 1 Gal — OAT Aluminum Protection, Long-Life","description":"\u003cp\u003e\u003cstrong\u003eValvoline Zerex G48 Concentrate is a long-life ethylene-glycol antifreeze formulated with organic acid technology to protect engines and cooling-system metals, including aluminum.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from a BASF-developed hybrid carboxylate formula and refined by Valvoline, Zerex G48 Concentrate is a professional-grade engine coolant concentrate designed for extended service intervals. It mixes with water to create a fully effective coolant that resists corrosion, helps prevent scale and cavitation, and is compatible with many light-vehicle cooling systems that specify OAT (organic acid technology) performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Zerex G48 protect modern aluminum engines?\u003c\/h3\u003e\n\u003cp\u003eZerex G48 uses organic acid inhibitors in an ethylene glycol base to form a protective film on metal surfaces, reducing electrochemical corrosion and pitting. It’s engineered to safeguard aluminum components common in contemporary cylinder heads, radiators, and charge-air coolers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulation includes hybrid carboxylate OAT inhibitors for aluminum protection\u003c\/li\u003e\n  \u003cli\u003eReduces electrochemical corrosion and cavitation damage\u003c\/li\u003e\n  \u003cli\u003eDesigned for long service life to minimize maintenance frequency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat mix ratio should I use and how do I prepare it?\u003c\/h3\u003e\n\u003cp\u003eZerex G48 is supplied as a concentrate so you must dilute it with water according to the freeze\/boil protection you need. A 50\/50 mix gives balanced freeze and boil protection and corrosion resistance for most climates; adjust proportion for colder conditions or OEM recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical recommended mix: 50% concentrate, 50% distilled water\u003c\/li\u003e\n  \u003cli\u003eUse 60\/40 or 70\/30 for increased freeze protection in extreme cold\u003c\/li\u003e\n  \u003cli\u003eAlways consult your vehicle’s manual for manufacturer-specified coolant type and ratio\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs Zerex G48 compatible with other coolants and materials?\u003c\/h3\u003e\n\u003cp\u003eAs an OAT hybrid carboxylate product, Zerex G48 provides broad metal compatibility, but mixing with different chemistry types can shorten coolant life and reduce protection. For best results, flush the cooling system before converting between coolant types and follow OEM guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with aluminum, iron, and most cooling-system materials when used correctly\u003c\/li\u003e\n  \u003cli\u003eAvoid mixing with traditional inorganic additive technology (IAT) coolants without system flush\u003c\/li\u003e\n  \u003cli\u003eBack-to-back conversions require complete system drain and rinse to prevent inhibitor dilution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and maintenance benefits can I expect?\u003c\/h3\u003e\n\u003cp\u003eZerex G48 delivers extended corrosion protection and steady coolant performance over longer drain intervals compared with conventional IAT formulas. Its concentrate format lets you tailor freeze\/boil protection while reducing the frequency of coolant service when used per recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended service life reduces coolant change frequency\u003c\/li\u003e\n  \u003cli\u003eConsistent corrosion inhibition for mixed-metal systems\u003c\/li\u003e\n  \u003cli\u003eConcentrate form minimizes storage space and shipping weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Valvoline Zerex G48 Concentrate is aimed at do-it-yourselfers and professional technicians who service modern passenger vehicles with aluminum components and who need an OAT-style, long-life coolant. It’s suitable for drivers wanting durable corrosion protection and for workshops that stock a concentrated product to mix on demand to meet regional climate needs and OEM specifications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eFeatures:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReliable\u003c\/li\u003e\n  \u003cli\u003eProfessional\u003c\/li\u003e\n  \u003cli\u003eHigh performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix Zerex G48 with other coolants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mixing with different coolant chemistries can reduce effectiveness. Flush the system before switching to Zerex G48 to ensure full protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What dilution gives good all-season protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A 50\/50 mix with distilled water is standard for balanced freeze\/boil protection and corrosion control in most climates.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Valvoline","offers":[{"title":"Default Title","offer_id":67590986891449,"sku":"B079WZ9DDS","price":87.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/valvoline-zerex-g48-front-bottle.jpg?v=1790539795"},{"product_id":"peak-titanium-antifreeze-coolant-concentrate-1-gal-long-life-protection-water-pump-safe","title":"PEAK Titanium Antifreeze \u0026 Coolant Concentrate 1 Gal — Long‑Life Protection, Water‑Pump Safe","description":"\u003cp\u003e\u003cstrong\u003ePEAK Titanium Concentrate is a 1‑gallon, prediluted engine antifreeze and coolant formulated to deliver long‑lasting corrosion control, superior water‑pump protection, and broad compatibility with all engine cooling systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis concentrate offers an extended‑life formula engineered for modern engines and older vehicles alike. It combines proprietary inhibitors that clean metal surfaces, prevent insulating film buildup, and help maintain efficient heat transfer. Designed for flushing, filling, or topping off, the product is compatible with a wide range of coolant colors and chemistries, making it a flexible option for mixed‑fleet maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow long will PEAK Titanium protect my engine?\u003c\/h3\u003e\n\u003cp\u003eWhen used with proper cooling system maintenance, PEAK Titanium is formulated to deliver protection lasting more than 15 years or up to 500,000 miles. Its extended‑life inhibitors are selected to provide sustained corrosion and cavitation resistance over long service intervals. Regular system inspections and recommended fluid changes extend the product’s performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGuaranteed protection up to 15+ years \/ 500,000+ miles with proper maintenance\u003c\/li\u003e\n  \u003cli\u003eLong‑life inhibitor package resists depletion over extended intervals\u003c\/li\u003e\n  \u003cli\u003eSuitable for vehicles with long service schedules and heavy duty use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this coolant compatible with my vehicle and other coolants?\u003c\/h3\u003e\n\u003cp\u003ePEAK Titanium concentrate is formulated for broad compatibility across engine cooling systems and can be used with other coolant technologies and colors. It’s suitable for mixing, topping off, or complete system fills after following manufacturer dilution guidelines. Always consult your vehicle manual before mixing coolants if unsure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with all coolant colors and technologies\u003c\/li\u003e\n  \u003cli\u003eRecommended for flushing, filling, or topping off systems\u003c\/li\u003e\n  \u003cli\u003eUse proper dilution per vehicle manufacturer instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat technical protections does this antifreeze provide?\u003c\/h3\u003e\n\u003cp\u003eThe product earned top marks for water‑pump protection in industry testing and meets several ASTM performance standards for engine coolants. Its chemistry helps remove deposits and prevents heat‑insulating films that can reduce coolant flow and cause overheating. These attributes support reliable heat transfer and component longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePerfect 10 score in ASTM D2809 water‑pump protection testing\u003c\/li\u003e\n  \u003cli\u003eMeets ASTM D6210, D3306 and D4985 performance requirements\u003c\/li\u003e\n  \u003cli\u003eProprietary formula cleans surfaces and prevents insulating films\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use this 1‑gallon concentrate in my maintenance routine?\u003c\/h3\u003e\n\u003cp\u003eUse PEAK Titanium concentrate when flushing and refilling the cooling system or to top off after coolant loss. Mix to the proper concentration as specified by your vehicle’s manufacturer, and follow safe handling and disposal practices. Routine checks of coolant level, hoses, and the cooling system will maximize the product’s lifespan.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMix concentrate according to vehicle dilution requirements\u003c\/li\u003e\n  \u003cli\u003eIdeal for system flushes, full refills, or top‑offs\u003c\/li\u003e\n  \u003cli\u003eInspect hoses, clamps, and radiator cap during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: PEAK Titanium Concentrate is aimed at vehicle owners, fleet managers, and professional technicians who want a flexible, long‑life coolant solution. It’s particularly useful for those maintaining mixed fleets, doing preventative maintenance on high‑mileage vehicles, or seeking a concentrate compatible with multiple coolant types. Choose this product when you need a single, industry‑tested coolant concentrate that supports durable heat transfer and component protection across many vehicle models.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mix PEAK Titanium with other coolants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—PEAK Titanium is compatible with most coolant technologies and colors, but follow manufacturer dilution guidelines and check vehicle manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I dilute the 1‑gallon concentrate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Dilute according to your vehicle’s specified ratio; mix with distilled water if required and follow the owner’s manual for exact concentration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67590990790841,"sku":"B0DR3JS9Z2","price":81.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-titanium-front-label.jpg?v=1790539928"},{"product_id":"zerex-original-green-antifreeze-coolant-concentrate-1-gal-low-silicate-corrosion-resistant","title":"Zerex Original Green Antifreeze\/Coolant Concentrate 1 Gal – Low‑Silicate, Corrosion‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eZerex Original Green Low Silicate Concentrate is a one-gallon antifreeze\/coolant concentrate formulated to protect engines from freezing and coolant-system corrosion.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for passenger cars, light-duty and heavy-duty vehicles, Zerex Original Green uses a low-silicate, organic-acid inhibitor package that has been relied on by many automakers for decades. As a concentrate, it must be mixed with the correct ratio of water to deliver freeze protection and heat-transfer properties for your climate and application. The formula helps minimize rust and scale, and contains a bittering agent to discourage accidental ingestion.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I mix Zerex Original Green concentrate for proper freeze protection?\u003c\/h3\u003e\n\u003cp\u003eMixing ratio determines the temperature at which the coolant will freeze and boil. For most climates, a 50\/50 mix of Zerex concentrate and water provides balanced freeze and boil protection and good corrosion control. Adjust the ratio for extreme climates—higher concentrate for colder areas, lower concentrate for milder conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50\/50 mix typically protects down to about -34°F and raises boiling point significantly when pressurized.\u003c\/li\u003e\n  \u003cli\u003eUse distilled or deionized water to avoid mineral deposits if possible.\u003c\/li\u003e\n  \u003cli\u003eMeasure with an antifreeze tester to confirm freeze\/boil protection before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat corrosion protection does Zerex Original Green provide?\u003c\/h3\u003e\n\u003cp\u003eThe product employs a patented organic acid corrosion inhibitor package that helps protect engine metals and cooling-system components over time. It is formulated to resist rust and scale formation across a range of metals commonly found in cooling systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-silicate formula minimizes deposit buildup on aluminum parts.\u003c\/li\u003e\n  \u003cli\u003eOrganic inhibitors extend protection for typical service intervals when maintained properly.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain heat-transfer efficiency by reducing corrosion and deposits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs Zerex Original Green safe and easy to use around the garage?\u003c\/h3\u003e\n\u003cp\u003eZerex Original Green concentrate should be handled with normal safety precautions—avoid ingestion and skin contact, and store away from children and pets. The product contains a bittering agent to reduce accidental swallowing risk. When used and diluted according to directions, it integrates into standard cooling-system service procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContains 30–50 ppm denatonium benzoate as a bittering agent for safety.\u003c\/li\u003e\n  \u003cli\u003eWear gloves and eye protection when handling concentrate and hot coolant.\u003c\/li\u003e\n  \u003cli\u003eDispose of old coolant responsibly at an appropriate recycling or disposal facility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and service situations are compatible with this coolant?\u003c\/h3\u003e\n\u003cp\u003eZerex Original Green is suitable for many passenger cars, light-duty trucks and some heavy-duty equipment where a low-silicate, extended-life coolant is recommended. Check your vehicle manufacturer’s coolant specification and maintenance schedule before switching coolant types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUsed by many automakers historically; verify OEM requirements for your model year.\u003c\/li\u003e\n  \u003cli\u003eAcceptable for systems calling for ethylene-glycol-based, low-silicate inhibitors.\u003c\/li\u003e\n  \u003cli\u003eNot pre-mixed—must be diluted to match manufacturer-specified concentrations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Zerex Original Green Low Silicate Concentrate is aimed at DIY mechanics, fleet maintenance teams and professional shops that need a concentrated, low-silicate antifreeze for a wide range of vehicles. If you require flexible mixing ratios, reliable rust protection, and a product with long-standing automaker acceptance, this concentrate offers a practical, service-friendly option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to pre-mix Zerex Original Green before adding to my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Zerex Original Green is a concentrate and should be diluted with water per your vehicle's recommended ratio, commonly 50\/50.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What freeze protection does a 50\/50 mix provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A 50\/50 mix typically protects down to around -34°F and raises the coolant's boiling point under system pressure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Zerex","offers":[{"title":"Default Title","offer_id":67591001800889,"sku":"B000CNJ6JG","price":84.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/zerex-original-green-front-label.jpg?v=1790540220"},{"product_id":"peak-fleet-charge-sca-concentrate-coolant-antifreeze-1-gallon-heavy-duty-corrosion-thermal-protection","title":"PEAK Fleet Charge SCA Concentrate Coolant\/Antifreeze 1 Gallon — Heavy-Duty Corrosion \u0026 Thermal Protection","description":"\u003cstrong\u003ePEAK Fleet Charge SCA Precharged Coolant\/Antifreeze is a concentrated, supplemental coolant additive formulated to protect heavy-duty diesel, gasoline, and natural gas engines from corrosion, freezing, and overheating.\u003c\/strong\u003e\n\n\u003cp\u003eKeep your fleet running reliably with a professionally formulated concentrate created for heavy-duty service. This 1-gallon container delivers a precharged supplemental coolant additive (SCA) that mixes into engine cooling systems to provide long-lasting corrosion control and thermal protection. It’s engineered to work with a variety of heavy-duty engines and is compatible when diluted to factory-recommended concentrations.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coolant protect heavy-duty engines?\u003c\/h3\u003e\n\u003cp\u003eThe formulation contains corrosion inhibitors and supplemental additives that target metal surfaces, deposits, and cavitation in heavy-duty cooling systems. When prepared to the correct ratio, it reduces pitting, scale buildup, and oxidation so components run cooler and last longer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes SCA chemistry for protection of iron, steel, copper, and aluminum components\u003c\/li\u003e\n  \u003cli\u003eHelps prevent cavitation and liner pitting in high-compression diesel engines\u003c\/li\u003e\n  \u003cli\u003eReduces deposit formation that can impair heat transfer\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet the longevity demands of commercial vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat engines and systems is PEAK Fleet Charge compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis product is formulated for heavy-duty diesel, gasoline, and natural gas engines commonly used in trucks, buses, and industrial applications. It is intended for closed cooling systems and is compatible with a range of OEM-spec antifreeze technologies when mixed as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for heavy-duty diesel, gasoline, and natural gas powertrains\u003c\/li\u003e\n  \u003cli\u003eWorks in mixed-metal cooling systems found on commercial equipment\u003c\/li\u003e\n  \u003cli\u003eCan be used where supplemental coolant additives are required\u003c\/li\u003e\n  \u003cli\u003eFollow OEM instructions for concentrate-to-water ratios and testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I mix and apply the concentrate safely?\u003c\/h3\u003e\n\u003cp\u003eMeasure and dilute the concentrate according to your engine maker’s recommendations or to standard 50\/50 coolant ratios where applicable. Use appropriate personal protective equipment, avoid ingesting or inhaling, and dispose of old coolant in accordance with local regulations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMix with demineralized or distilled water if required by spec\u003c\/li\u003e\n  \u003cli\u003eTest coolant concentration and SCA levels after filling\u003c\/li\u003e\n  \u003cli\u003eTop up and recondition systems as part of routine maintenance\u003c\/li\u003e\n  \u003cli\u003eStore container upright, sealed, away from heat and direct sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can fleet operators expect?\u003c\/h3\u003e\n\u003cp\u003eUsing this precharged concentrate helps extend component life, lower downtime from cooling-system failures, and maintain efficient heat transfer under heavy loads. Proper use reduces the frequency of major repairs and supports predictable maintenance scheduling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended corrosion and cavitation protection for critical parts\u003c\/li\u003e\n  \u003cli\u003eStabilized cooling performance across a wide temperature range\u003c\/li\u003e\n  \u003cli\u003eReduced risk of overheating-related breakdowns and service interruptions\u003c\/li\u003e\n  \u003cli\u003eFormulation intended to last with proper maintenance and monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: PEAK Fleet Charge SCA Precharged Coolant\/Antifreeze concentrate is built for fleet managers, heavy equipment operators, and maintenance technicians who need a reliable, commercial-grade coolant additive. It suits businesses that run heavy-duty diesel, gasoline, or natural gas vehicles and want a concentrated solution to maintain cooling-system integrity, reduce downtime, and support longer component life. Always confirm compatibility with vehicle OEM specifications and follow recommended dilution, testing, and disposal procedures.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this concentrate directly without diluting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Follow OEM recommendations; typically this concentrate must be diluted to the specified coolant-to-water ratio before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is PEAK Fleet Charge compatible with all antifreeze types?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s formulated for heavy-duty systems and many OEMs, but always verify compatibility with your engine manufacturer before mixing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":67591141261497,"sku":"B076JJ48ZR","price":81.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/peak-fleet-charge-front-label.jpg?v=1790542248"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/shell-zone-dex-cool-front-packaging.jpg?v=1790612483","url":"https:\/\/redleafauto.ca\/collections\/antifreeze-coolant.oembed?page=2","provider":"Redleaf Auto","version":"1.0","type":"link"}