{"title":"AUTOKAY","description":"\u003cp\u003eBrowse 47 AUTOKAY products at RedLeaf Auto, including fuel system parts, body \u0026amp; trim parts and motorcycle, atv \u0026amp; snowmobile parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"autokay-front-cruise-distance-radar-sensor-for-nissan-altima-rogue-kicks-2017-2021-direct-oem-fit-part-28438-5fa6a","title":"AUTOKAY Front Cruise Distance Radar Sensor for Nissan Altima Rogue Kicks 2017–2021 — Direct OEM Fit, Part 28438-5FA6A","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY's front cruise distance radar sensor (replace part 28438-5FA6A) restores forward distance detection for compatible Nissan Altima, Rogue and Kicks models from 2017–2021.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is a direct replacement front radar module designed to interface with Nissan adaptive cruise control and forward collision systems. Built to match the OEM mounting points and electrical connector, the sensor helps re-establish factory-like distance sensing after a damaged or missing unit. The part is sold as a single sensor and fits multiple trims and engine options across Altima, Rogue, Rogue Sport and Kicks model years listed below.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Nissan models and years will this radar sensor fit?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY sensor is compatible with many Nissan Altima, Rogue, Rogue Sport and Kicks vehicles spanning 2017 through 2021. Fitment covers several trims and both 2.0L\/2.5L gasoline engines or 1.6L for Kicks where specified. Always verify the original part number (28438-5FA6A) on your vehicle before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNissan Altima: 2019–2021 (2.0L, 2.5L) including S, SL, SR, SV, Platinum trims\u003c\/li\u003e\n  \u003cli\u003eNissan Rogue: 2017–2021 (2.0L, 2.5L) including S, SL, SV and hybrid variations where applicable\u003c\/li\u003e\n  \u003cli\u003eNissan Rogue Sport: 2017–2021 (2.0L) S, SL, SV trims\u003c\/li\u003e\n  \u003cli\u003eNissan Kicks: 2020–2021 (1.6L) S, SR, SV trims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement sensor match the original equipment?\u003c\/h3\u003e\n\u003cp\u003eThis unit is manufactured to align with OEM form, fit and electrical connections so it installs into the factory bracket and plugs into the existing harness. It is intended as a direct swap to avoid modification of the bumper or wiring. Proper alignment and calibration after installation are necessary to restore system performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement part number: 28438-5FA6A\u003c\/li\u003e\n  \u003cli\u003eFactory-style mounting and connector compatibility\u003c\/li\u003e\n  \u003cli\u003eSold as a single front cruise distance radar sensor\u003c\/li\u003e\n  \u003cli\u003eRequires post-installation calibration by a qualified technician\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and setup?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically involves removing the bumper cover, unbolting the existing sensor, and swapping in the AUTOKAY unit before reconnecting the wiring. After the sensor is mechanically installed, many vehicles require a diagnostic alignment or software calibration to ensure accurate detection and to clear any system warnings. If you’re unsure, use a professional service or a dealer with the appropriate calibration tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic tools and bumper removal required for access\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play electrical connector designed to match the OEM harness\u003c\/li\u003e\n  \u003cli\u003eCalibration via scan tool or dealer required to clear fault codes\u003c\/li\u003e\n  \u003cli\u003eSold individually—one sensor per package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sensor restore adaptive cruise and forward sensing functions?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failed or missing front radar with this AUTOKAY sensor can restore the vehicle’s forward distance sensing and adaptive cruise features when installed and calibrated correctly. Note that system behavior depends on proper installation, vehicle software, and any other related components being functional.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores hardware needed for distance monitoring when integrated correctly\u003c\/li\u003e\n  \u003cli\u003eDoes not include calibration service or guarantee of ECU reinitialization\u003c\/li\u003e\n  \u003cli\u003eCheck compatibility using original part number before ordering\u003c\/li\u003e\n  \u003cli\u003eContact AUTOKAY support if you have questions about fit or function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY front cruise distance radar sensor is aimed at Nissan owners, independent shops and mechanics who need a direct-replacement module for Altima, Rogue, Rogue Sport or Kicks vehicles from 2017–2021. It’s suitable for anyone restoring adaptive cruise or forward sensing functionality after collision damage or sensor failure, provided you have access to post-installation calibration services.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sensor fit my 2020 Nissan Rogue?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this AUTOKAY sensor fits many 2020 Nissan Rogue trims (2.5L and some hybrid variants). Verify your vehicle's original part number (28438-5FA6A) before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is calibration required after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, post-installation calibration or diagnostic alignment is typically required to restore proper sensing and clear system warnings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67585075839161,"sku":"B0BYN7L94F","price":181.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-radar-sensor-front-view.jpg?v=1790466229"},{"product_id":"autokay-radiator-condenser-cooling-fan-kit-for-honda-civic-2006-2011-2-piece-abs-direct-fit-replacement","title":"AUTOKAY Radiator Condenser Cooling Fan Kit for Honda Civic 2006-2011 — 2‑Piece ABS Direct‑Fit Replacement","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY's radiator condenser cooling fan kit is a direct-fit, two-piece replacement assembly engineered to restore proper airflow and temperature control for Honda Civic models from 2006 through 2011.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis cooling fan kit replaces worn or damaged fans and matches OEM mounting points and part numbers for straightforward installation. Constructed from durable ABS plastic and supplied as a two-piece set, the kit is designed to integrate with your Civic's radiator and AC condenser assemblies, helping maintain the vehicle's designed cooling performance under normal driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWill this fan assembly fit my 2008 Honda Civic?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit is made to fit Honda Civic model years 2006–2011 and aligns with the factory mounting points for those vehicles. It replaces the common OEM part numbers to ensure compatibility without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2006, 2007, 2008, 2009, 2010, 2011\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers: 19015-RNA-A01, 19030-RNA-A51, 19020-RCJ-A01\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on design: no custom fabrication required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the AUTOKAY fan kit and what material is it made from?\u003c\/h3\u003e\n\u003cp\u003eThe fan housing and blades are molded from high-quality ABS plastic, a material chosen for impact resistance and heat tolerance in automotive applications. The construction aims to withstand road vibration and typical engine bay temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: durable black ABS plastic\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist heat exposure common in engine compartments\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet standard replacement part expectations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what do I need for installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships as a two-piece radiator\/condenser cooling fan set, ready to replace the existing assembly on compatible Civics. Installation generally requires basic hand tools and following vehicle-specific service procedures; wiring and sensors should be reconnected as they were originally.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 2-piece radiator condenser cooling fan set (as pictured)\u003c\/li\u003e\n  \u003cli\u003eTools: common hand tools for unbolting and reattaching the fan shroud\u003c\/li\u003e\n  \u003cli\u003eNotes: retain or transfer any OEM clips, screws, or connectors as needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this fan kit interact with my car's cooling system and AC condenser?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is designed to sit between the radiator and AC condenser to move air across both cores when commanded by your vehicle's cooling controls. Proper fitment ensures the fan supports temperature regulation and AC system airflow under normal operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlacement: mounts to radiator\/condenser area for efficient airflow\u003c\/li\u003e\n  \u003cli\u003eFunction: supports engine cooling and condenser airflow when activated\u003c\/li\u003e\n  \u003cli\u003eIntegration: intended to use existing vehicle wiring and mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This AUTOKAY fan kit is aimed at Honda Civic owners (2006–2011) and independent mechanics who need a cost-effective, OE-compatible replacement for damaged or nonfunctional radiator\/condenser cooling fans. It's suitable for those seeking a direct-fit, install-ready assembly made from durable ABS plastic that matches OEM part numbers for fitment clarity. If you're replacing a failed fan shroud, restoring airflow after a collision, or refreshing an aging cooling assembly, this kit provides the two-piece components required for a straightforward swap.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fan kit replace OEM part number 19015-RNA-A01?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is compatible with and designed to replace OEM part numbers including 19015-RNA-A01.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a full plug-and-play replacement for a 2009 Civic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally yes; it is a direct bolt-on design for 2006–2011 Civics and uses existing mounting points and connectors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67585577287865,"sku":"B0C3M6RKR7","price":327.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-view-fan-assembly.jpg?v=1790472403"},{"product_id":"autokay-engine-cooling-fan-control-module-for-audi-2-0l-3-0l-direct-fit-oem-replacement","title":"AUTOKAY Engine Cooling Fan Control Module for Audi 2.0L\/3.0L — Direct-Fit OEM Replacement","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY's Engine Cooling Fan Control Module is a direct-fit replacement for factory fan controllers on many Audi 2.0L and select 3.0L models, restoring reliable fan operation and temperature management.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Audi is showing cooling-fan faults, intermittent fan operation, or fault codes tied to the fan control module, replacing the module with a correct-fit unit can bring back consistent cooling performance. This AUTOKAY module is built to match the original equipment's electrical and mounting interfaces, and it replaces multiple OE part numbers so you can fit it across several Audi model years without modifying wiring or brackets.\u003c\/p\u003e\n\n\u003ch3\u003eWhich original part numbers does this replace?\u003c\/h3\u003e\n\u003cp\u003eThis module is manufactured to replace the common OE references used across Audi lineups. Installing the AUTOKAY unit removes the need to source the exact OE item when those part numbers are unavailable or discontinued.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM: 8K0959501A, 8K0959501C, 8K0959501G, 8K0910501D\u003c\/li\u003e\n  \u003cli\u003eEngineered to match original connector pinout and mounting points\u003c\/li\u003e\n  \u003cli\u003eTested for electrical compatibility with the listed Audi models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Audi models and years is it compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis AUTOKAY controller covers a broad range of Audi vehicles that share the same fan control design. Confirm fitment by matching the part number and engine type before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Audi A4 (2009–2016) and A4 allroad (2013–2016) 2.0L I4\u003c\/li\u003e\n  \u003cli\u003eFits Audi A4 Quattro (2009–2016) and A5\/A5 Quattro (2010–2016) 2.0L I4\u003c\/li\u003e\n  \u003cli\u003eFits Audi A6\/A6 Quattro (2012–2017) 2.0L I4 and Audi A7 Quattro (2014–2016) 3.0L V6\u003c\/li\u003e\n  \u003cli\u003eFits Audi Q3\/Q3 Quattro (2015–2018) and Audi Q5 (2010–2017) 2.0L I4\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and performance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when the correct part and engine variant are confirmed. The module mounts in the same location as the factory unit and uses the stock wiring harness; a basic set of tools and common mechanical experience are usually sufficient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit mounting and OEM-style electrical connector\u003c\/li\u003e\n  \u003cli\u003eNo vehicle coding usually required—replace and test fan operation\u003c\/li\u003e\n  \u003cli\u003eRestores fan speed control, reduces erratic running and related engine temperature warnings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I verify compatibility before buying?\u003c\/h3\u003e\n\u003cp\u003eDouble-check the factory part number on your existing module and compare engine and model year details. If the part numbers or vehicle engine match those listed, this AUTOKAY module is intended as a proper replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLocate the part number on your current module and compare to OE references listed above\u003c\/li\u003e\n  \u003cli\u003eConfirm your vehicle’s model year and engine (2.0L I4 or 3.0L V6 where noted)\u003c\/li\u003e\n  \u003cli\u003eContact a technician or provide VIN to seller for fitment confirmation if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers, independent shops, and DIY enthusiasts who own compatible Audi models and need an accurate, ready-to-install replacement for a failing engine cooling fan control module. It’s aimed at anyone seeking an OEM-compatible part that restores proper fan control without modifying the vehicle’s original wiring or mounts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePackage includes: 1x AUTOKAY Engine Cooling Fan Control Module\u003c\/li\u003e\n  \u003cli\u003eNote: Always verify part number and vehicle fitment before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this module fit my Audi A4 2012 2.0L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this AUTOKAY module fits Audi A4 2009–2016 2.0L I4 models if your existing part matches the listed OE numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools or coding after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are typically required and coding is usually unnecessary; verify operation after installation and consult a technician if faults persist.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67586601779385,"sku":"B07F1SQTV8","price":110.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-fan-control-module-front-view.jpg?v=1790487961"},{"product_id":"autokay-tpms-rubber-snap-in-valve-stems-100-pack-17-20008-preloaded-cores-copper-base-for-cars-trucks","title":"AUTOKAY TPMS Rubber Snap-In Valve Stems 100-Pack (17-20008) — Preloaded Cores \u0026 Copper Base for Cars \u0026 Trucks","description":"\u003cp\u003e\u003cstrong\u003eA pack of 100 AUTOKAY snap-in rubber TPMS valve stems (part 17-20008) designed to replace worn or damaged valve stems for tire pressure monitoring sensors—sold as valve stems only, not complete sensors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese AUTOKAY valve stems are the rubber snap-in components used with many aftermarket and OE-style tire pressure monitoring sensors. Each stem comes preloaded with a valve core, screw and cap, and the construction pairs rubber with a pure-copper base for conductivity and corrosion resistance where it mounts to the sensor. The listing is ideal for garages, fleets or DIYers who need bulk replacements to service TPMS-equipped wheels across a wide range of makes and model years.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included in this 100-piece TPMS valve stem kit?\u003c\/h3\u003e\n\u003cp\u003eThis set contains 100 snap-in rubber valve stems (AUTOKAY part 17-20008) packaged for bulk replacement jobs. Items are valve stems only—TPMS sensors are not included—so these are intended to mate with compatible sensors already on hand or purchased separately.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 100 valve stems\u003c\/li\u003e\n  \u003cli\u003ePre-installed valve core, plus valve cap and mounting screw\u003c\/li\u003e\n  \u003cli\u003eMaterials: rubber body with pure-copper base\u003c\/li\u003e\n  \u003cli\u003ePart numbers referenced: 17-20008, 20008, 20018\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and sensors will these valve stems work with?\u003c\/h3\u003e\n\u003cp\u003eThese snap-in stems fit many common passenger cars and trucks that use snap-in TPMS valve stems. They’re compatible with a variety of makes, but you should confirm fitment against your vehicle’s OE part number or sensor model before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommonly compatible brands: Ford, Chevy, Dodge, Chrysler, Buick, Ram, Cadillac, Pontiac, GMC, Jeep, Saturn, Subaru, Lincoln, Hyundai\u003c\/li\u003e\n  \u003cli\u003eDesigned for snap-in style TPMS sensors (not clamp-in types)\u003c\/li\u003e\n  \u003cli\u003eCheck the sensor’s valve stem interface and part number for a match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these valve stems installed and maintained?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typical for snap-in stems: remove the wheel, push the valve stem into the wheel’s valve hole, secure the sensor if required, and torque the mounting screw to spec. Routine checks for cracks, leaks or corrosion will prolong service life; replace any stem showing wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall from inside the wheel—ensure proper seating and a clean valve hole\u003c\/li\u003e\n  \u003cli\u003eTorque mounting screw per sensor manufacturer instructions\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for rubber deterioration, leaks, or copper corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Mechanics, tire shops, fleet managers and car enthusiasts who perform frequent TPMS servicing or manage multiple vehicles will find this 100-piece kit practical and cost-effective. It’s especially useful for businesses needing consistent, compatible valve stems for bulk wheel work. Note: this product supplies the valve stems only; confirm part compatibility with your TPMS sensors and vehicle model numbers before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are complete TPMS sensors included with these valve stems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this kit contains valve stems only; TPMS sensors are not included. Confirm compatibility with your existing sensors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these snap-in stems fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Ford, GM, Chrysler, Jeep, Subaru and Hyundai models, but always verify the OE part or sensor interface before buying.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67586700411065,"sku":"B07MBMFDDX","price":143.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-packaging-100pcs-17-20008.jpg?v=1790490447"},{"product_id":"autokay-carburetor-replacement-kit-for-john-deere-d125-d130-d140-full-service-kit-with-gaskets-fuel-parts","title":"AUTOKAY carburetor replacement kit for John Deere D125 D130 D140 — full service kit with gaskets \u0026 fuel parts","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 796997 MIA11461 carburetor is a complete replacement kit engineered to restore fuel delivery for compatible John Deere 100-series lawn tractors and residential V-twin engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower or tractor has lost idle stability, struggles to start, or runs unevenly, a worn or clogged carburetor is often the cause. This AUTOKAY assembly is supplied as a full service kit—carburetor plus gaskets, fuel components, spark plugs and more—so you can replace the part and related consumables in one repair session. The unit is compatible with several John Deere OEM numbers and fits many 20–25 HP V-twin models and 100-series tractors and zero-turn mowers.\u003c\/p\u003e\n\n\u003ch3\u003eWhich John Deere models and engine numbers does this carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThis replacement list covers a wide range of 100-series tractors, select X-series models and residential zero-turn mowers. It maps to multiple OEM and service numbers so you can cross-check compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits John Deere D125, D130, D140, D150, D170 and other 100-series lawn tractors\u003c\/li\u003e\n  \u003cli\u003eCompatible with LA135–LA175 and X130R, X140, X165 models\u003c\/li\u003e\n  \u003cli\u003eWorks with Z235, Z245, Z255, Z425 EZtrak residential zero-turn mowers\u003c\/li\u003e\n  \u003cli\u003eCross-references: 796997, 796227, 796258 and John Deere MIA11461, MIA10632, MIA11790, MIA11173\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and why is it useful?\u003c\/h3\u003e\n\u003cp\u003eThe kit is not just the carburetor; it includes a full set of small parts that commonly need replacement during a carburetor service. Having the matching gaskets, fuel lines and filter on hand reduces multiple trips and helps ensure a clean, leak-free installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x AUTOKAY carburetor ready for installation\u003c\/li\u003e\n  \u003cli\u003e7x gaskets to reseal mating surfaces and prevent leaks\u003c\/li\u003e\n  \u003cli\u003e1x fuel line, 1x fuel pump and 1x mid-stream fuel filter for fresh fuel delivery\u003c\/li\u003e\n  \u003cli\u003e2x spark plugs, 2x rubber hoses, 1x straight-through switch and 2x retaining rings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm fitment and avoid ordering the wrong part?\u003c\/h3\u003e\n\u003cp\u003eBecause small design or casting revisions may exist between production runs, compare your existing carburetor’s shape and mounting points to the product photos. Also verify the John Deere part number stamped on your machine and check engine family numbers before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch the picture of the carburetor and mounting flange to your current unit\u003c\/li\u003e\n  \u003cli\u003eConfirm one of the compatible part numbers (796997, MIA11461, etc.) against your manual\u003c\/li\u003e\n  \u003cli\u003eCheck engine model and horsepower — designed for 20–25 HP V-twin engines\u003c\/li\u003e\n  \u003cli\u003eContact seller with photos if your carburetor has unusual ports or linkages\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires basic hand tools and a few hours depending on experience. Replace all old gaskets and fuel hoses, prime the new filter and inspect linkages; then run the engine to verify idle and throttle response, adjusting as needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended: clean mounting surfaces and replace all included gaskets\u003c\/li\u003e\n  \u003cli\u003ePrime the fuel system, check for leaks, and tighten fittings to specified torque\u003c\/li\u003e\n  \u003cli\u003eAdjust idle\/mixture per engine manual after warm-up for best performance\u003c\/li\u003e\n  \u003cli\u003eKeep old parts until the new carburetor runs reliably for a short test period\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis AUTOKAY carburetor kit is intended for DIY mechanics, small-fleet maintenance teams, and homeowners who service their own lawn equipment. It suits owners of John Deere 100-series tractors, select X-series and EZtrak zero-turn mowers with 20–25 HP V-twin engines who want a comprehensive replacement package. If you’re unsure about fit, measure and photograph your current carburetor and compare it to the product images or reach out to the seller for confirmation before installing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor replace John Deere part 796997?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The AUTOKAY unit cross-references 796997 and related numbers like 796227 and 796258.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit a 23 HP V-twin mower engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is compatible with 20–25 HP V-twin engines used in many John Deere 100-series models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67587300262073,"sku":"B07G9F28Y6","price":108.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-carburetor-front-view.jpg?v=1790504967"},{"product_id":"autokay-front-left-door-lock-actuator-for-ford-f-150-2015-2020-jl3z1521813d-oe-style-waterproof","title":"AUTOKAY Front Left Door Lock Actuator for Ford F-150 2015-2020 — JL3Z1521813D, OE-style, Waterproof","description":"\u003cp\u003e\u003cstrong\u003eThe AUTOKAY JL3Z1521813D is a direct-fit front left (driver side) door lock actuator designed to restore reliable locking and unlocking for compatible Ford F-Series trucks from model years 2015–2021.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your F-150 or Super Duty pickup is experiencing slow, noisy, or non-functioning door locking on the driver side, this actuator provides a straightforward OE-style replacement. Built from an updated Ford-based design, it includes improvements such as an internal spring and enhanced environmental sealing to resist water, dust, and freezing conditions. The unit ships as a single front-left actuator intended for regular cab configuration compatibility and several Super Duty models.\u003c\/p\u003e\n\n\u003ch3\u003eWill this actuator fit my Ford truck?\u003c\/h3\u003e\n\u003cp\u003eThis actuator replaces several OEM numbers and fits specific Ford models and years. It is intended for front left driver side doors on F-150 models 2015–2020 and certain Super Duty trucks from 2017–2021—check compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace Part Numbers: JL3Z-1521813-D, CK2Z-1521813-J, HL3Z-1521813-D, DLA1413\u003c\/li\u003e\n  \u003cli\u003eFits Ford F-150: 2015, 2016, 2017, 2018, 2019, 2020\u003c\/li\u003e\n  \u003cli\u003eFits Ford Super Duty F-250\/F-350: 2017–2021\u003c\/li\u003e\n  \u003cli\u003eFits Ford Super Duty F-450\/F-550: 2017–2021\u003c\/li\u003e\n  \u003cli\u003eNote: Not compatible with Extended Cab\/Super Cab or Standard Cab in some configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same general steps as most front door actuator replacements and can be completed with basic hand tools. If you are comfortable removing the inner door panel and disconnecting wiring harnesses, this is a do-it-yourself job; otherwise, a local shop can install it quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: screwdriver set, trim panel tool, socket wrench set\u003c\/li\u003e\n  \u003cli\u003eProcedure: remove door trim, unplug connector, unbolt old actuator, install new unit, test operation\u003c\/li\u003e\n  \u003cli\u003eTime: typically 30–90 minutes depending on experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and performance features?\u003c\/h3\u003e\n\u003cp\u003eThis actuator is built from Ford's later-generation design improvements to deliver more dependable performance in harsh conditions. The mechanism includes an internal spring for smoother motion and upgraded sealing to reduce moisture intrusion and debris-related failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof, freeze-proof, and dustproof improvements for extended service life\u003c\/li\u003e\n  \u003cli\u003eOE-style mounting and electrical connector for a direct replacement fit\u003c\/li\u003e\n  \u003cli\u003eSupplied as a single front left (driver side) actuator in the package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this replacement is for: This AUTOKAY actuator is aimed at owners or technicians who need a direct-fit driver-side door lock solution for Ford F-150 (2015–2020) or compatible Super Duty trucks (2017–2021) experiencing intermittent or failed locking. Choose this part if you want a cost-effective, OE-compatible replacement with improved environmental protection and straightforward installation—ideal for DIY mechanics and repair shops servicing late-model Ford pickups.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this actuator replace the JL3Z-1521813-D OEM part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This AUTOKAY unit is a direct replacement for JL3Z-1521813-D and equivalent part numbers listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the actuator waterproof for winter use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The design includes enhanced sealing and is described as waterproof and freeze-resistant to reduce failure in wet or cold conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67587307438265,"sku":"B0F4CXBR67","price":95.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-left-actuator-front-view.jpg?v=1790505335"},{"product_id":"autokay-pcv-valve-connector-hose-tube-for-ford-ranger-3-0l-v6-part-2l5z-6c324-ca-oe-spec-direct-fit","title":"AUTOKAY PCV Valve Connector Hose Tube for Ford Ranger 3.0L V6 — Part 2L5Z-6C324-CA, OE-Spec Direct Fit","description":"\u003cp\u003e\u003cstrong\u003eHigh-quality replacement PCV valve connector hose tube (part 2L5Z-6C324-CA) designed to restore proper crankcase ventilation on Ford Ranger 3.0L V6 models from 2002–2008.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis AUTOKAY connector hose is an OE-spec direct replacement crafted to match the original fit and function for Ford Ranger vehicles equipped with the 3.0L V6 engine. It connects the positive crankcase ventilation (PCV) valve assembly to the intake system, helping the engine control system manage crankcase gases reliably. Built to withstand engine-bay heat and oil exposure, the hose offers a straightforward swap for worn or cracked factory tubing.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hose fit my Ford Ranger?\u003c\/h3\u003e\n\u003cp\u003eIf your Ranger is a 2002–2008 model with the 3.0L V6 engine, this AUTOKAY hose is made to replace the factory part number 2L5Z-6C324-CA. The shape, port diameters and mounting points are engineered to align with original equipment so no modification is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: Ford Ranger 2002, 2003, 2004, 2005, 2006, 2007, 2008 (3.0L V6)\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for OEM part 2L5Z-6C324-CA\u003c\/li\u003e\n  \u003cli\u003eDesigned for matching factory routing and connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement hose?\u003c\/h3\u003e\n\u003cp\u003eAUTOKAY manufactures this connector tube to OE specifications using materials chosen for resistance to heat, oil and engine-vibration. That means it resists hardening, cracking and premature failure that commonly affect original rubber tubing over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed to meet OE performance standards for longevity\u003c\/li\u003e\n  \u003cli\u003eMaterial resists oil exposure and engine-bay temperatures\u003c\/li\u003e\n  \u003cli\u003eManufactured to keep shape under repeated thermal cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what does the package include?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended as a simple, direct swap: remove the worn hose, seat the AUTOKAY tube into the same ports, and secure with the original clamps or new clamps if desired. Typical DIY skill and basic hand tools are enough to complete the replacement in a short amount of time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes as 1 x PCV valve connector hose tube in the package\u003c\/li\u003e\n  \u003cli\u003eDirect fit — no cutting or extra adapters required\u003c\/li\u003e\n  \u003cli\u003eWorks with existing clamps and mounting points for fast replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance or maintenance benefits can I expect?\u003c\/h3\u003e\n\u003cp\u003eReplacing a degraded PCV connector hose helps ensure proper crankcase ventilation, reduces the chance of vacuum leaks, and can prevent oil or vapor seepage into the engine bay. Renewing the hose is a cost-effective maintenance step that supports stable idle and consistent emissions behavior tied to the PCV system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces vacuum leaks from cracked or hardened tubing\u003c\/li\u003e\n  \u003cli\u003ePrevents oil and vapor seepage that can foul engine components\u003c\/li\u003e\n  \u003cli\u003eSupports consistent PCV system performance and combustion control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY PCV valve connector hose tube is intended for Ford Ranger owners, mechanics and DIY enthusiasts who need a reliable, OE-spec replacement for part number 2L5Z-6C324-CA. It’s a practical choice if your Ranger’s 3.0L V6 shows signs of hose wear, oil seepage, rough idle, or if routine maintenance identifies the original tube as cracked or brittle. Choose this hose when you want a direct-fit, durable component to restore proper crankcase ventilation and reduce engine-bay leaks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hose fit Ford Ranger 3.0L V6 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s a direct replacement for Ford Ranger 2002–2008 3.0L V6, part 2L5Z-6C324-CA.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation difficult and are clamps included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Installation is simple and uses existing clamps; clamps are not included in the package.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67587363373241,"sku":"B0F3CFKM2Z","price":100.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-pcv-hose-front-packaging.jpg?v=1790506905"},{"product_id":"autokay-gy6-150cc-carburetor-replacement-for-110-150cc-scooters-26mm-intake-43mm-air-box","title":"AUTOKAY GY6 150cc Carburetor Replacement for 110–150cc Scooters 26mm Intake 43mm Air-Box","description":"\u003cp\u003e\u003cstrong\u003eThe AUTOKAY GY6 150cc carburetor is a direct-fit replacement carburetor designed for many 4-stroke 110–150cc scooters, mopeds and go-karts with a 26mm intake and 43mm air-box connection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement carburetor from AUTOKAY is built to match common GY6-style 4-stroke engines used across numerous scooter and small vehicle brands. With a 26mm intake inner diameter and a 43mm air-box outer diameter, it’s engineered to install on many 110cc, 125cc and 150cc machines without major modification. The unit is a practical spare-part choice when the original carburetor is clogged, worn, or damaged and you need a reliable mechanical replacement rather than electronic fuel systems.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and models will this carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThis AUTOKAY carburetor is compatible with most GY6-style 4-stroke engines in the 110–150cc range. It specifically suits a long list of scooter and moped makes that historically use GY6 150 platforms. Always compare intake and air-box measurements before purchasing to confirm fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many 110cc, 125cc and 150cc GY6 4-stroke engines\u003c\/li\u003e\n  \u003cli\u003e26mm intake inner diameter; 43mm air-box outer diameter\u003c\/li\u003e\n  \u003cli\u003eCommonly used on models from brands like Lifan, Baotian, Qingqi, Panterra and others\u003c\/li\u003e\n  \u003cli\u003eIdeal where original part numbers match GY6-150 specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the AUTOKAY GY6 150cc carburetor?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically involves removing the old carburetor, mating the intake and air-box connections, and reconnecting throttle and fuel lines. Basic mechanical skills and common tools are sufficient for a standard swap. If you’re unsure, consult a service manual or a qualified mechanic to avoid leaks and ensure correct jetting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect battery and fuel before starting\u003c\/li\u003e\n  \u003cli\u003eMatch 26mm intake and 43mm air-box diameters for a secure seal\u003c\/li\u003e\n  \u003cli\u003eReconnect throttle cable, fuel line and vacuum as per original routing\u003c\/li\u003e\n  \u003cli\u003eCheck for leaks and adjust idle\/mixture after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and maintenance should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe carburetor restores fuel delivery characteristics similar to stock units when properly jetted and tuned. Routine maintenance—cleaning jets, checking float level and replacing gaskets—keeps the unit functioning well. Performance can vary depending on engine condition, exhaust, and air filtration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires periodic cleaning of jets and passages\u003c\/li\u003e\n  \u003cli\u003eFloat and needle valve inspection recommended during service\u003c\/li\u003e\n  \u003cli\u003eTuning the idle and air\/fuel mixture optimizes throttle response\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard 4-stroke fuel systems and pump pressures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this carburetor require modifications or additional parts?\u003c\/h3\u003e\n\u003cp\u003eMost installs are bolt-on for compatible GY6 setups, but some scooters may need minor hose adapters or a different mounting spacer. Verify throttle cable length and vacuum port locations to avoid clearance issues. Keep basic gasket and clamp sizes on hand for a clean fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePossible need for manifold or air-box adapter if diameters differ slightly\u003c\/li\u003e\n  \u003cli\u003eMay require replacement gaskets, clamps or throttle cable adjustment\u003c\/li\u003e\n  \u003cli\u003eNo electronic modules are needed—this is a mechanical carburetor\u003c\/li\u003e\n  \u003cli\u003eCompare OEM part numbers and measurements before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOKAY GY6 150cc carburetor is aimed at DIY mechanics, scooter repair shops and owners of 110–150cc GY6-based scooters, mopeds or go-karts who need a cost-effective mechanical replacement. Choose this part if you require a 26mm intake\/43mm air-box fitment for common GY6 4-stroke engines and want a straightforward replacement to restore reliable fuel delivery.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this carburetor fit my 150cc GY6 scooter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your scooter uses a GY6 4-stroke engine with a 26mm intake and 43mm air-box, it’s likely compatible. Verify measurements and model fit list first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the carburetor come pre-jetted for my engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It ships with standard OEM-style jetting; final tuning may be required for optimal performance on specific engines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67588697718969,"sku":"B073XHX613","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-gy6-150cc-carburetor-front-view.jpg?v=1790522530"},{"product_id":"autokay-engine-cooling-fan-control-module-for-ford-edge-2007-2015-940002904-oe-style-replacement-multi-speed-restore","title":"AUTOKAY Engine Cooling Fan Control Module for Ford Edge 2007-2015 — 940002904 OE-Style Replacement, Multi-Speed Restore","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 940002904 is a direct-replacement engine cooling fan control module engineered to restore reliable electric fan operation in compatible Ford, Lincoln and Mercury vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle’s radiator fans are acting intermittently, running constantly, or not engaging at all, the fan control module can be the root cause. This AUTOKAY unit is supplied as an OE-style replacement for part numbers 902209 and 940002904 and is specified to fit a range of Ford, Lincoln and Mercury models. The description below explains compatibility, installation basics, performance features and who benefits most from this part.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines does this module fit?\u003c\/h3\u003e\n\u003cp\u003eThis control module is made to match OEM fitment for multiple Ford Motor Company vehicles across several years and engine types. Confirm the part number and physical connector on your vehicle before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Ford Edge: 2.0L (2012–2015), 3.5L (2007–2015), 3.7L (2011–2014)\u003c\/li\u003e\n  \u003cli\u003eFits Ford Flex: 3.5L (2010)\u003c\/li\u003e\n  \u003cli\u003eFits Lincoln MKX: 3.5L (2007–2010), 3.7L (2011–2015)\u003c\/li\u003e\n  \u003cli\u003eFits Ford Crown Victoria and Town Car: 4.6L (2006–2011)\u003c\/li\u003e\n  \u003cli\u003eFits Mercury Grand Marquis: 4.6L (2006–2011)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this replacement module affect cooling performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a faulty fan control module restores proper fan activation logic and prevents overheating or unnecessary fan runtime. The module controls fan speed and engagement based on temperature and A\/C inputs, helping the engine maintain intended operating temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores automatic fan on\/off and multi-speed control\u003c\/li\u003e\n  \u003cli\u003eReduces risk of engine overheating or high idle temperatures\u003c\/li\u003e\n  \u003cli\u003ePrevents excessive battery drain from fans running continuously\u003c\/li\u003e\n  \u003cli\u003eCompatible with factory wiring harness and mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for a DIYer comfortable working under the hood and disconnecting electrical connectors. You will need basic hand tools, safety precautions, and about 30–60 minutes for removal and replacement if access is uncomplicated.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: ratchet, socket set, flat screwdriver, dielectric grease\u003c\/li\u003e\n  \u003cli\u003eDisconnect battery negative before starting electrical work\u003c\/li\u003e\n  \u003cli\u003eVerify connector pin alignment and secure mounting to avoid vibration\u003c\/li\u003e\n  \u003cli\u003eInspect fuse and relay related to fan circuit if issues persist\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the package include and what should I check on arrival?\u003c\/h3\u003e\n\u003cp\u003eThe product ships as a single replacement module intended to drop into the OEM location. On receiving the part, compare the connector, mounting tabs and part number against the old module and your vehicle’s specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains 1 x AUTOKAY engine cooling fan control module\u003c\/li\u003e\n  \u003cli\u003eCheck that connector pins are straight and free of corrosion\u003c\/li\u003e\n  \u003cli\u003eConfirm mounting points line up with your vehicle bracket\u003c\/li\u003e\n  \u003cli\u003eKeep original module until new unit is tested in-vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis AUTOKAY 940002904 unit is intended for vehicle owners, independent mechanics and repair shops who need a cost-effective, OE-style replacement for a failing fan control module. It’s suitable for anyone restoring proper fan control on the listed Ford, Lincoln and Mercury models, especially when diagnosing intermittent fan operation, abnormal fan-on behavior, or cooling-related fault codes. Always verify exact part compatibility with your VIN or by visual comparison before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this module replace part number 902209?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. AUTOKAY 940002904 is listed as a replacement for part number 902209 and matches OE-style specifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit a 2013 Ford Edge 2.0L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The module is compatible with Ford Edge 2.0L models from 2012 to 2015.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67589802098873,"sku":"B0DJXKZS8Y","price":74.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-fan-module-front.jpg?v=1790532202"},{"product_id":"autokay-6v-electric-fuel-pump-for-1927-1932-buick-universal-in-line-replacement-with-installation-kit-4-7-psi","title":"AUTOKAY 6V Electric Fuel Pump for 1927–1932 Buick — Universal In-Line Replacement with Installation Kit, 4–7 PSI","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY’s Universal 6-volt electric fuel pump is a compact in-line replacement designed to supply 4–7 PSI fuel pressure for 6V carbureted Buicks from 1927–1932, and it includes a simple installation kit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSwap an aging mechanical pump or add electric assist to a vintage Buick with this modern, currently produced unit. Built for 6-volt carbureted engines, the pump works as either a primary or assist feed and accepts unleaded and alcohol-blended fuels. It’s compatible with both positive- and negative-ground electrical systems, arrives with the necessary fittings and mounting hardware, and is intended for easy in-line installation without extensive modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWill this pump fit my 1927–1932 Buick and how is it installed?\u003c\/h3\u003e\n\n\u003cp\u003eThe AUTOKAY pump is made to be a universal solution for 6-volt carbureted Buicks from 1927 through 1932. Installation is straightforward: place it in the fuel line between tank and carburetor, secure the bracket, and attach the electrical leads matching your vehicle ground type. Typical installs require only basic hand tools and the supplied fittings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits 6V carbureted Buick models 1927–1932\u003c\/li\u003e\n  \u003cli\u003eIn-line mounting — between tank and carburetor\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting bracket, clamps, and electrical connectors\u003c\/li\u003e\n  \u003cli\u003eWorks with positive or negative ground systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much pressure and flow does this pump provide?\u003c\/h3\u003e\n\n\u003cp\u003eThis unit delivers approximately 4–7 PSI, suitable for most vintage carburetor fuel requirements when used as an assist or primary pump. The pressure range helps steady fuel delivery without over-pressurizing classic carburetor floats. If your setup needs a specific flow rate, pair the pump with appropriate lines and filters to maintain consistent delivery.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRated output: roughly 4–7 PSI\u003c\/li\u003e\n  \u003cli\u003eSuitable as primary or assist pump for carbureted engines\u003c\/li\u003e\n  \u003cli\u003eWorks best with correct hose diameter and fuel filter\u003c\/li\u003e\n  \u003cli\u003eStable pressure for carburetor float operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this pump compatible with modern fuels and electrical systems?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the AUTOKAY pump is designed to handle unleaded gasoline and alcohol-blended fuels commonly encountered today. It’s a current-production part rather than old stock, so seals and materials are selected for modern fuel formulations. Electrical compatibility covers both positive- and negative-ground 6V systems, making it adaptable to restored or modified vintage vehicles.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAccepts unleaded and alcohol-blended gasoline\u003c\/li\u003e\n  \u003cli\u003eCurrent production — updated materials and seals\u003c\/li\u003e\n  \u003cli\u003eOperates on 6-volt systems with either ground polarity\u003c\/li\u003e\n  \u003cli\u003eRecommended to use with a fuel filter for longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the installation kit and what maintenance is needed?\u003c\/h3\u003e\n\n\u003cp\u003eThe package includes one fuel pump and the pictured installation components so you can mount and wire the unit right away. Routine checks of hose connections, electrical terminals, and the inline filter will keep the pump operating reliably. Replace hoses or clamps that show wear and confirm the pump’s mounting stays vibration-free.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePackage includes pump, bracket, clamps, and connectors\u003c\/li\u003e\n  \u003cli\u003eSimple in-line design for quick replacement or emergency use\u003c\/li\u003e\n  \u003cli\u003ePeriodic inspection of hoses, clamps, and filter recommended\u003c\/li\u003e\n  \u003cli\u003eReplace any brittle fuel lines to prevent leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY Universal 6V Electric Fuel Pump with installation kit is aimed at vintage Buick owners, restorers, and hobby mechanics who need a reliable replacement or emergency backup for 6-volt carbureted systems. It’s ideal for those who want a straightforward in-line electric solution compatible with modern fuels and either ground polarity, without complicated wiring or fabrication.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this pump run on modern unleaded gas?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The AUTOKAY 6V pump is compatible with unleaded and alcohol-blended fuels used today.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it work with positive and negative grounds?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pump is designed to operate on 6-volt systems with either positive or negative ground.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67589812682937,"sku":"B08HQP833N","price":79.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-view-pump-and-kit.jpg?v=1790532540"},{"product_id":"autokay-front-abs-wheel-speed-sensors-pack-of-2-left-right-color-coded-matched-pair","title":"AUTOKAY Front ABS Wheel Speed Sensors Pack of 2 (Left \u0026 Right) — Color-coded Matched Pair","description":"\u003cp\u003e\u003cstrong\u003eTwo genuine AUTOKAY front ABS wheel speed sensors (left and right) engineered to restore accurate wheel rotation signals for compatible Chevrolet Equinox and GMC Terrain models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement sensors come as a matched pair and correspond to OE part numbers 20811371, 8543704500, ALS1994, and 14602750. They are intended for front left and right fitment and include color-coded connectors—blue for front right and yellow for front left—to make installation straightforward. Each unit reads wheel speed for the anti-lock braking system and traction control sensors on specified model years of the Equinox and Terrain.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these AUTOKAY sensors fit?\u003c\/h3\u003e\n\u003cp\u003eThese sensors are tailored for select Chevrolet Equinox and GMC Terrain trims across model years listed below. Verify your vehicle’s year and submodel before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet Equinox: 2015–2017 L; 2010–2016 LTZ; 2017 Premier; 2010–2017 LS and LT submodels.\u003c\/li\u003e\n  \u003cli\u003eGMC Terrain: 2013–2016 Denali; 2015–2016 SL; 2010–2016 SLE and SLT submodels.\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers: 20811371, 8543704500, ALS1994, 14602750.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I identify left and right sensors during installation?\u003c\/h3\u003e\n\u003cp\u003eThe pair is color-coded for quick identification to reduce installation errors. Follow these markings and your vehicle’s repair manual or sensor locations to install correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eYellow connector = front left sensor.\u003c\/li\u003e\n  \u003cli\u003eBlue connector = front right sensor.\u003c\/li\u003e\n  \u003cli\u003eMatched-pair packaging ensures both sensors are calibrated for symmetric wheel inputs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect when these sensors are installed?\u003c\/h3\u003e\n\u003cp\u003eOnce fitted, sensors supply wheel speed data to ABS and traction systems, helping those systems interpret wheel rotation. Properly functioning sensors can clear ABS or traction fault codes caused by failed or degraded original parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores reliable wheel-speed signal to ABS and traction control modules.\u003c\/li\u003e\n  \u003cli\u003eMay resolve ABS\/TC warning lights caused by faulty front sensors.\u003c\/li\u003e\n  \u003cli\u003eSold as a matched pair to maintain balanced sensor outputs between left and right sides.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these sensors easy to replace at home or by a mechanic?\u003c\/h3\u003e\n\u003cp\u003eReplacement is a common DIY job for those comfortable with wheel removal and basic electrical disconnects, but professional installation is recommended if you’re unsure. Fasteners, clips, and connector access vary by vehicle and sometimes require basic tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical steps: lift vehicle, remove wheel, unbolt old sensor, disconnect harness, install new sensor, reassemble.\u003c\/li\u003e\n  \u003cli\u003eNo special programming usually required—bolt-on replacement for compatible models.\u003c\/li\u003e\n  \u003cli\u003eUse OEM-style connectors and routing to avoid wire chafing or sensor interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY sensor pair is for owners or technicians working on compatible Chevrolet Equinox and GMC Terrain model years who need a reliable front left and right ABS wheel speed sensor replacement. Choose this pack if you want a color-coded, matched set that replaces OE numbers 20811371, 8543704500, ALS1994, and 14602750 and prefer straightforward identification during installation. If your vehicle shows ABS or traction-control warnings and diagnostics point to a front wheel speed sensor fault, this matched pair offers a direct-fit replacement option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors replace OEM part 20811371?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This AUTOKAY pair replaces OE numbers including 20811371, 8543704500, ALS1994, and 14602750.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is special programming required after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally no programming is needed; these are direct-fit sensors for the listed Equinox and Terrain models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67590633291961,"sku":"B0C81FX6LK","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-packaging-pair.jpg?v=1790535359"},{"product_id":"autokay-hid-xenon-ballast-d3s-d3r-for-cadillac-xts-cts-direct-fit-oem-replacement","title":"AUTOKAY HID Xenon Ballast D3S\/D3R for Cadillac XTS CTS — Direct-Fit OEM Replacement","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY HID D3S\/D3R xenon ballast replaces factory units to restore reliable high-intensity discharge headlight function for compatible vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Cadillac XTS or CTS (or another compatible model) shows flickering, slow start-up, or complete HID failure, a faulty ballast is often the culprit. This AUTOKAY ballast is designed as a direct-fit, aftermarket replacement that matches common OEM interchange part numbers and fits left or right front mounting locations. Before ordering, verify electrical connector style and part number compatibility with your vehicle using the chart in the listing.\u003c\/p\u003e\n\n\u003ch3\u003eWill this AUTOKAY ballast fit my Cadillac XTS or CTS?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on the original headlight system and the factory ballast part number. The AUTOKAY unit covers multiple interchange numbers used across Cadillac, Land Rover, Kia, Volvo, Dodge and Chevrolet applications, so it fits many late-model installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces common OEM numbers like 1 307 329 315 15 and A 222 900 33 00\u003c\/li\u003e\n  \u003cli\u003eFits front-left and front-right mounting positions\u003c\/li\u003e\n  \u003cli\u003eWorks with D3S \/ D3R xenon bulbs used in listed vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this ballast improve headlight performance?\u003c\/h3\u003e\n\u003cp\u003eThe ballast provides the high-voltage ignition pulse and stable current control required for xenon HID bulbs to start quickly and maintain consistent light output. Replacing a failing ballast eliminates flicker, delayed start, and uneven beam intensity without changing the bulb itself.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivers correct ignition voltage for D3S\/D3R xenon bulbs\u003c\/li\u003e\n  \u003cli\u003eStabilizes current to prevent flickering or dimming\u003c\/li\u003e\n  \u003cli\u003eRestores consistent beam pattern and brightness when matched to compatible bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and parts are covered by this replacement ballast?\u003c\/h3\u003e\n\u003cp\u003eThis AUTOKAY ballast supports a range of models that originally used similar ballast modules. It is commonly fitted to Cadillac XTS and CTS, several Land Rover Range Rover variants, Kia Sorento, Volvo C30\/C70, Dodge Dart, and Chevrolet Camaro, among others. Always cross-check the interchange numbers and connector type.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCadillac: XTS, CTS\u003c\/li\u003e\n  \u003cli\u003eLand Rover: Range Rover models using D3S\/D3R systems\u003c\/li\u003e\n  \u003cli\u003eKia, Volvo, Dodge, Chevrolet applications listed in the compatibility data\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying and installing this ballast?\u003c\/h3\u003e\n\u003cp\u003eConfirm the original ballast part number and plug style to ensure a direct replacement. Inspect the headlight wiring and bulb condition; replacing only the ballast when the bulb or wiring is damaged can leave the issue unresolved. Professional or experienced DIY installation is recommended for proper alignment and secure mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch one of the interchange numbers (e.g., 130732931515, A2229003300)\u003c\/li\u003e\n  \u003cli\u003eConfirm D3S vs D3R bulb type used in your headlights\u003c\/li\u003e\n  \u003cli\u003eCheck connectors, mounting points, and surrounding wiring for damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY HID ballast is aimed at vehicle owners and mechanics who need a cost-effective, direct-replacement ballast for D3S\/D3R xenon headlights on Cadillac XTS\/CTS and other compatible models. It suits do-it-yourselfers comfortable working with headlamp assemblies and professional shops needing a reliable aftermarket option that matches multiple OEM part numbers. If you’re replacing a failing ballast to stop flicker, slow start, or no-start issues, this unit provides a straightforward swap—just verify fitment and connector compatibility before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this ballast work with both D3S and D3R bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this AUTOKAY unit supports D3S and D3R xenon bulb systems listed as compatible, but verify your original bulb type before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace the ballast myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if you’re comfortable removing headlight assemblies and handling electrical connectors; otherwise have a technician install it.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67590683295929,"sku":"B083DX8V4R","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-ballast-front-view.jpg?v=1790535691"},{"product_id":"autokay-front-passenger-power-seat-control-switch-20914737-plug-and-play-oem-fit-restores-forward-height-recline","title":"AUTOKAY front passenger power seat control switch 20914737 — plug-and-play OEM-fit restores forward\/height\/recline","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 20914737 is a direct-replacement front passenger-side power seat adjust switch designed to restore multi-directional seat control for compatible Cadillac, Chevrolet, and GMC models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement seat control switch gives you factory-style operation for the right (front passenger) power seat. Built to match OEM specifications and listed under part numbers 20914737 and 23247096, the module is a plug-and-play component that fits a wide range of late-model Cadillac, Chevrolet, and GMC vehicles. Use this switch to regain forward\/back, height, and recline adjustments without expensive dealer parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this switch fit?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY 20914737 switch is compatible with many GM models from roughly 2013–2020. Check your original part number and the switch appearance to confirm fitment before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCadillac: ATS and Escalade (2015–2019), CTS (2014–2019), ELR (2014–2016), XTS (2013–2019)\u003c\/li\u003e\n  \u003cli\u003eChevrolet: Corvette (2014–2019), Impala (2014), Silverado 1500 (2014–2018), Silverado 2500\/3500 HD (2015–2019), Suburban\/Tahoe (2015–2020)\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra 1500 (2014–2018), Sierra 2500\/3500 HD (2015–2019), Yukon\/Yukon XL (2015–2020)\u003c\/li\u003e\n  \u003cli\u003eConfirm fit by matching OEM numbers 20914737 or 23247096 and connector shape\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with interior trim removal and electrical connectors. The switch is designed to be plug-and-play, so no cutting or splicing is required when the match is correct.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove the old switch by gently prying the trim and unplugging the harness\u003c\/li\u003e\n  \u003cli\u003ePlug the AUTOKAY unit into the existing seat connector—no wiring changes needed\u003c\/li\u003e\n  \u003cli\u003eReinstall trim and test forward\/back, height, and recline functions before finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat controls and functions does this switch restore?\u003c\/h3\u003e\n\u003cp\u003eThis passenger-side module restores multi-directional seat movement so passengers can find a comfortable position quickly. It supports forward and backward travel, height adjustments, and recline angle control consistent with the original factory behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForward and backward seat travel for legroom adjustment\u003c\/li\u003e\n  \u003cli\u003eHeight adjustment to raise or lower seating position\u003c\/li\u003e\n  \u003cli\u003eRecline control to set backrest angle\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet OEM standards for smooth operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should you check before buying?\u003c\/h3\u003e\n\u003cp\u003eTo avoid returns, visually compare the replacement switch and confirm the OEM part number on your existing unit. Differences in connector shape, mounting tabs, or button layout mean the switch may not fit your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare your current part number to 20914737 or 23247096\u003c\/li\u003e\n  \u003cli\u003eInspect connector plug style and pin layout for compatibility\u003c\/li\u003e\n  \u003cli\u003eVerify button arrangement and mounting clips match your vehicle’s bezel\u003c\/li\u003e\n  \u003cli\u003eContact us with photos if you need help confirming fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and technicians who need an affordable, OEM-style replacement for a faulty right-front passenger power seat control. It’s ideal for owners of compatible Cadillac, Chevrolet, and GMC models seeking a direct-fit, plug-and-play switch to restore full seat adjustability without dealer sourcing or complex wiring.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePackage includes: 1 x Right Hand (Passenger's Side) Front Seat Switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this switch replace OEM part 20914737?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This AUTOKAY unit replaces OEM part numbers 20914737 and 23247096 when connector and appearance match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is wiring required for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No wiring changes are needed—it's a plug-and-play replacement for compatible vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591152533689,"sku":"B0CPP717B5","price":69.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-passenger-switch-front-view.jpg?v=1790542525"},{"product_id":"autokay-carburetor-for-honda-gcv160-engines-gcv160a0-gcv160la-fit-complete-kit-with-gaskets-spark-plug","title":"AUTOKAY Carburetor for Honda GCV160 Engines — GCV160A0\/GCV160LA Fit, Complete Kit with Gaskets \u0026 Spark Plug","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY GCV160 Auto Choke Carburetor is a direct-replacement carburetor kit designed to restore proper fuel delivery and starting performance for Honda GCV160-series small engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete carburetor assembly is built to replace factory Honda units on a broad range of GCV160 engines and compatible mowers. The kit includes gaskets, filters, a spark plug, a thermowax accessory and other install components so you can replace the carburetor and related consumables in one service visit. It matches multiple OEM part numbers and fits popular HRR and HRX lawn mower models, making it a practical option when the original carburetor becomes clogged, worn or fails to regulate fuel correctly.\u003c\/p\u003e\n\n\u003ch3\u003eWhat Honda models and engine codes will this AUTOKAY carburetor work with?\u003c\/h3\u003e\n\u003cp\u003eThis carburetor fits many Honda GCV160 engine variants and specific walk-behind mower models. Check your engine code and mower model against the listed compatibility before ordering to ensure a match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible engine codes: GCV160A0, GCV160LA, GCV160A, GCV160LA0 and related suffixes (S1M, S3H, S3T, SBT, etc.).\u003c\/li\u003e\n  \u003cli\u003eCommon mower models: HRR216 and HRX217 series (examples: HRR216K5–K11, HRX217K1–K2).\u003c\/li\u003e\n  \u003cli\u003eBackup compatibility: also fits some BB-series engines (BB76JA, BB75D\/B, BB65E A, BB75E C).\u003c\/li\u003e\n  \u003cli\u003eVerify the machine’s parts manual or current OEM part number to confirm fit before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what parts come in the box?\u003c\/h3\u003e\n\u003cp\u003eThe kit is intended for bolt-on replacement with basic tools; most users with mechanical experience can complete the swap in under an hour. The package supplies all commonly replaced consumables so you don’t need to order extra items separately.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 carburetor, 5 gaskets, 1 spark plug, 1 fuel filter, 1 air filter, 1 speed control spring, 1 thermowax accessory (16620-Z8D-305), and 1 fuel line.\u003c\/li\u003e\n  \u003cli\u003eInstallation requires typical hand tools, a clean work area and careful gasket alignment to avoid vacuum leaks.\u003c\/li\u003e\n  \u003cli\u003eFollow engine service intervals and torque specs from Honda for secure mounting and linkage adjustment.\u003c\/li\u003e\n  \u003cli\u003eKeep the old carburetor and parts until successful startup and leak-checking are complete.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich OEM part numbers and replacements does this AUTOKAY carburetor match?\u003c\/h3\u003e\n\u003cp\u003eThis replacement is cross-referenced to many Honda part numbers so you can match it with the number stamped on your existing carburetor or listed in the mower manual. Cross-checking helps avoid ordering the wrong unit for your engine revision.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon replacement part numbers covered: 16100-Z0L-023, 16100-ZM0-803, 16100-ZM0-804 and others in the 16100 series.\u003c\/li\u003e\n  \u003cli\u003eAdditional cross-refs include: 16100-Z8B-841, 16100-Z1L-854, 16100-Z0L-871 and similar variants.\u003c\/li\u003e\n  \u003cli\u003eFuel filter reference: replaces 16952-ZA8-800 and 16952-Z8B-000 filters.\u003c\/li\u003e\n  \u003cli\u003eConfirm your part number on the old carb or engine label for exact compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this carburetor affect starting and running behavior?\u003c\/h3\u003e\n\u003cp\u003eWhen installed correctly, a clean, properly functioning carburetor restores consistent idle, smoother throttle response and more reliable cold starts compared to a clogged or leaking unit. This replacement includes a new auto-choke assembly and fresh filters to address common fuel-delivery problems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAuto-choke helps cold starts by temporarily richening the mixture until the engine warms up.\u003c\/li\u003e\n  \u003cli\u003eNew fuel and air filters reduce contamination that causes poor idling and stalling.\u003c\/li\u003e\n  \u003cli\u003eFresh gaskets and fuel line reduce the chance of vacuum leaks and fuel seepage.\u003c\/li\u003e\n  \u003cli\u003eReplace worn carburetor components rather than repeatedly cleaning degraded cores.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY GCV160 Auto Choke Carburetor kit is best for DIY owners, lawn care technicians and small-engine repair shops needing an affordable, full replacement for worn or damaged Honda GCV160 carburetors. It suits anyone who wants a complete service kit—carburetor plus filters and gaskets—to restore mower reliability without sourcing multiple individual parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this carburetor fit my HRR216 mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many HRR216 variants (K2–K11 series). Verify your engine code and OEM part number to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include all installation parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — carburetor, gaskets, air and fuel filters, spark plug, speed spring, thermowax accessory and fuel line are included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591368769721,"sku":"B0957M47R3","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-gcv160-front-view-carburetor.jpg?v=1790548926"},{"product_id":"autokay-left-driver-side-mirror-glass-for-silverado-tahoe-2007-2013-heated-with-integrated-turn-signal","title":"AUTOKAY Left Driver-Side Mirror Glass for Silverado Tahoe 2007–2013 — Heated with Integrated Turn Signal","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY left driver-side replacement mirror glass provides a heated, turn-signal–equipped direct-fit mirror for Chevy Silverado, Tahoe and related GM trucks (2007–2013).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement mirror is shaped and wired to match the original equipment for many GM full-size trucks and SUVs from 2007–2013. Built from high-quality glass bonded to a heavy-duty ABS backing, it restores a wide, clear rearward view while adding a factory-style heated element and integrated turn signal. The unit replaces GM part number GM1324138 and is intended as a straightforward swap that connects to existing wiring without modification.\u003c\/p\u003e\n\n\u003ch3\u003eWill this mirror fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY left-side mirror is manufactured to match OE dimensions and mounting points for specific Chevy and GMC models from 2007 through 2013. It lists compatibility with Silverado, Tahoe, Suburban, Avalanche, Yukon, Sierra and Cadillac Escalade models from those years. Always compare your original part number and connector style before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits left driver side for 2007–2013 Chevy Silverado and Avalanche\u003c\/li\u003e\n  \u003cli\u003eCompatible with Tahoe, Suburban, Yukon, Sierra and Escalade same years\u003c\/li\u003e\n  \u003cli\u003eReplaces GM1324138; verify against your existing mirror label\u003c\/li\u003e\n  \u003cli\u003eDesigned to align with original mounting and wiring harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the heated function and turn signal work?\u003c\/h3\u003e\n\u003cp\u003eThe mirror includes an integrated heating element to speed clearing of fog, frost or condensation and a built-in turn signal to increase visibility when changing lanes. Wiring is set up to plug into your vehicle’s factory harness; the product ships with an extension cable and a 2-pin\/4-pin converter when needed for proper connection. No aftermarket controllers are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeating element reduces ice and fog buildup quickly\u003c\/li\u003e\n  \u003cli\u003eIntegrated LED turn signal shares lane-change intent with other drivers\u003c\/li\u003e\n  \u003cli\u003eIncludes 2-pin extension cable and 2-pin \u0026amp; 4-pin converter for hookups\u003c\/li\u003e\n  \u003cli\u003ePlugs into existing vehicle wiring for a direct replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be user-friendly and mirror the original factory replacement process. The glass and backing match OEM contours so the mirror pad snaps into the housing and the electrical connector plugs in easily. Basic hand tools and gentle prying are typically all that’s required; professional installation is optional if you prefer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdentical mounting geometry to original mirror for a direct fit\u003c\/li\u003e\n  \u003cli\u003eConnects to factory wiring—no splicing if connectors match\u003c\/li\u003e\n  \u003cli\u003eSimple snap-in installation; small pry tool may be helpful\u003c\/li\u003e\n  \u003cli\u003eFull replacement removes need to purchase separate heater or signal parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does this mirror offer?\u003c\/h3\u003e\n\u003cp\u003eThe product pairs optical-grade mirror glass with a robust ABS backing plate to resist warping and vibration. Materials are selected to maintain clarity and mechanical stability over time, supporting consistent visibility under road conditions. The sealed assembly prevents moisture intrusion and secures the heating element and signal electronics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptical-quality glass for a wide, clear viewing field\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty ABS backing resists deformation and wear\u003c\/li\u003e\n  \u003cli\u003eSealed construction protects heating element and wiring\u003c\/li\u003e\n  \u003cli\u003eElectrical components rated for typical automotive environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own compatible 2007–2013 Chevy, GMC or Cadillac full-size trucks and SUVs and need a reliable left-side mirror replacement that restores heating and turn-signal functionality. It’s aimed at DIY installers and repair shops seeking a direct-fit, OEM-style glass that integrates with factory wiring and improves visibility and signaling without extensive modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this mirror replace GM part GM1324138?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This left-side mirror is designed to replace GM part number GM1324138 for listed 2007–2013 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the heated and turn-signal functions plug into my factory wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally yes—this mirror uses factory-style connectors and includes converters and an extension cable for common harness types.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591439122617,"sku":"B0G1M5PMQD","price":62.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-left-mirror-front-view.jpg?v=1790551256"},{"product_id":"autokay-air-intake-hose-for-acura-mdx-2010-2013-direct-fit-17228-rye-a10-oem-equivalent-durable-elastomer","title":"AUTOKAY Air Intake Hose for Acura MDX 2010-2013 — Direct-Fit 17228-RYE-A10, OEM-Equivalent Durable Elastomer","description":"\u003cstrong\u003eAUTOKAY 17228-RYE-A10 is a direct-fit replacement air intake hose engineered to restore proper airflow for Acura MDX models from 2010 through 2013.\u003c\/strong\u003e\n\nThe air intake hose channels fresh air from the intake assembly to the engine; a cracked or collapsed hose can cause poor throttle response, check-engine lights, and decreased efficiency. This AUTOKAY replacement matches the original equipment part numbers 17228-RYE-A10 \/ 17228RYEA10 to ensure an accurate fit for Acura MDX 2010–2013 Base Sport Utility 4-Door vehicles. It’s manufactured to the shape, length, and connection specifications needed for a straightforward swap without trimming or modifications.\n\n\u003ch3\u003eHow does this hose restore performance for my MDX?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn intake hose eliminates leaks and restores the factory airflow path, which helps the engine management system read correct air volume and maintain smooth operation. A sealed, correctly sized hose reduces unmetered air that can trigger error codes and rough idling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-equivalent shape and diameter for proper airflow and sensor readings\u003c\/li\u003e\n  \u003cli\u003eEliminates vacuum leaks that cause rough idle or hesitation\u003c\/li\u003e\n  \u003cli\u003ePrevents dirt and contaminants from entering the intake tract\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my Acura MDX without modifications?\u003c\/h3\u003e\n\u003cp\u003eYes — this hose is designed to line up with the original mounting points and connectors used on Acura MDX 2010–2013 Base 4-Door models. You can expect a bolt-on replacement that reuses factory clamps and sensors in most installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-references original part numbers: 17228-RYE-A10, 17228RYEA10\u003c\/li\u003e\n  \u003cli\u003eFormed to match factory routing and attachment locations\u003c\/li\u003e\n  \u003cli\u003eNo cutting or reshaping needed for standard installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction details matter for longevity?\u003c\/h3\u003e\n\u003cp\u003eThe hose is made from automotive-grade flexible rubber or elastomer compounds formulated to resist oil, heat, and ozone exposure. Reinforced areas and molded ends help maintain seal integrity where clamps and sensor boots attach, extending service life compared with aging factory hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable elastomer resists cracking from engine heat and vibration\u003c\/li\u003e\n  \u003cli\u003ePrecision-molded ends ensure secure clamping to intake components\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand typical under-hood contaminants and oils\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a basic mechanical task for anyone comfortable with routine vehicle maintenance. Typical steps include removing the old hose, transferring any sensors or fittings, and securing the new hose with clamps. Expect most DIY installs to take under an hour; a few common hand tools are all that’s required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: screwdrivers, socket set, pliers for clamps\u003c\/li\u003e\n  \u003cli\u003eReuses factory clamps and sensors in most cases\u003c\/li\u003e\n  \u003cli\u003eQuick visual check for proper routing and clearances recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho this is for: Acura MDX owners (2010–2013 Base Sport Utility 4-Door) who notice intake-related symptoms such as rough idle, loss of throttle responsiveness, or a check-engine light caused by air leaks will find this AUTOKAY hose a direct replacement option. It’s suitable for DIY mechanics and professional technicians seeking an OEM-style aftermarket part identified by part numbers 17228-RYE-A10 \/ 17228RYEA10. Replace the old, brittle hose to bring back reliable airflow and help your engine run closer to its intended performance.\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hose fit all Acura MDX trim levels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This AUTOKAY hose fits Acura MDX 2010–2013 Base Sport Utility 4-Door models; verify against your OE part number before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the hose myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—installation is straightforward with basic tools and typically reuses factory clamps and sensors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591455801529,"sku":"B0CPYBYCRY","price":74.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-air-intake-hose-front-view.jpg?v=1790551767"},{"product_id":"autokay-engine-cabin-air-filter-combo-for-mazda-3-mazda-6-cx-5-cf11811-ca11259-2-pc-fit-2013-2025","title":"AUTOKAY Engine \u0026 Cabin Air Filter Combo for Mazda 3, Mazda 6 \u0026 CX-5 — CF11811 + CA11259, 2‑pc Fit 2013-2025","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY CF11811 cabin filter and CA11259 engine air filter set replaces original equipment to help keep intake air cleaner and cabin air fresher for compatible Mazda 3, Mazda 6, and CX-5 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis paired air filter kit includes one cabin air filter (CF11811) and one engine air filter (CA11259) designed to fit a range of Mazda compact and midsize models from 2013 through 2025 where specified. The combo is made as a direct-replacement option for the listed OE part numbers and focuses on restoring proper airflow, filtration performance, and passenger comfort after filter wear. It’s intended for naturally aspirated gasoline engines where noted; turbocharged variants are excluded. Below you’ll find concise answers to common buyer questions and a clear list of compatible applications and product details.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Mazda models and engine types does this filter combo fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit fits multiple Mazda model years and engine displacements but only for naturally aspirated gasoline variants. Confirm your vehicle’s engine and model year with the OEM part numbers provided before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMazda 3: 2.0L \/ 2.5L gasoline, model years 2014–2018.\u003c\/li\u003e\n  \u003cli\u003eMazda 6: 2.5L gasoline, model years 2014–2021 (naturally aspirated only).\u003c\/li\u003e\n  \u003cli\u003eMazda CX-5: 2.0L gasoline 2013–2018 and 2.5L gasoline 2014–2025 (naturally aspirated only).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat OEM part numbers does this AUTOKAY set replace?\u003c\/h3\u003e\n\u003cp\u003eThe package is matched to many original equipment and aftermarket reference numbers so you can cross-check compatibility quickly. The cabin and engine filter numbers list multiple equivalents used by Mazda and major filter manufacturers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCabin filter equivalents include CF11811 plus KD45-61-J6X, KR11-61-J6X, CPJ6X and other commonly referenced numbers.\u003c\/li\u003e\n  \u003cli\u003eEngine filter equivalents include CA11259 plus PE07-13-3A0, A26280, AF1548 and several aftermarket cross-references.\u003c\/li\u003e\n  \u003cli\u003ePackaging includes one cabin filter and one engine air filter in the kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will installing these filters affect driving comfort and engine performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a clogged cabin filter improves in-cabin air quality and HVAC efficiency, while a fresh engine air filter helps maintain airflow to the engine’s intake. Together they support consistent ventilation, reduce dust build-up, and help the engine breath as intended—particularly noticeable after long service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCabin filter: reduces dust, pollen, and particulate transfer into the passenger compartment.\u003c\/li\u003e\n  \u003cli\u003eEngine filter: helps preserve intake airflow and protects the engine from larger particulates.\u003c\/li\u003e\n  \u003cli\u003eSwapping both at service intervals restores HVAC and intake system performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I verify fitment and replace these filters?\u003c\/h3\u003e\n\u003cp\u003eCheck your vehicle’s owner manual or the existing filter’s part number against the listed cross-references. Cabin filters are often accessed behind the glovebox or under a glovebox panel; engine filters sit in a plastic airbox under the hood. Replacement is typically a simple, tool-light task for most DIYers or a routine service at any shop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch your vehicle’s year, model, and engine type with the compatibility list above.\u003c\/li\u003e\n  \u003cli\u003eCompare the current filter’s part number to the listed equivalents before purchase.\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer or vehicle service manual steps for safe removal and correct orientation during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers of compatible Mazda 3, Mazda 6, and CX-5 vehicles who want a direct-replacement, value-oriented air filtration solution for both the engine intake and cabin environment. Ideal for owners performing routine maintenance, those replacing worn or dirty filters, or anyone seeking OEM-equivalent cross-reference compatibility without buying parts separately.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this combo fit turbocharged Mazda engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These filters are specified for naturally aspirated gasoline engines only; turbocharged models are excluded.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes one AUTOKAY cabin air filter (CF11811) and one AUTOKAY engine air filter (CA11259).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591466254521,"sku":"B0FDKTCL8Z","price":62.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-cabin-and-engine-filter-kit-front-view.jpg?v=1790552177"},{"product_id":"autokay-ignition-coil-for-mtd-cub-cadet-troy-bilt-craftsman-994-00128-547cc-engines-direct-replacement","title":"AUTOKAY Ignition Coil for MTD\/Cub Cadet\/Troy-Bilt\/Craftsman 994-00128 – 547cc Engines, Direct Replacement","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 994-00128 is a direct-replacement ignition coil designed to restore spark performance on select MTD-family 547cc engines and compatible lawn tractors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your lawn tractor or mower won’t start or runs rough, a worn or faulty ignition coil is often the cause. The AUTOKAY 994-00128 ignition coil replaces prior part number 794-00128 and is engineered to suit a wide range of outdoor-power equipment brands including MTD, Cub Cadet, Troy-Bilt, Craftsman and others. It’s supplied as a single unit and intended for easy swap-in replacement on engines that match the listed engine codes.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and models will this ignition coil work with?\u003c\/h3\u003e\n\u003cp\u003eThis coil fits multiple 547cc engine codes and several tractor models that use those engines. Check your engine model plate or parts diagram to confirm the engine code before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 4X90HU, 4X90HUA, 4X90HW (547cc) engine families\u003c\/li\u003e\n  \u003cli\u003eCompatible with 8X90KU, 8X90KUB, 8X90ZU, 8X90ZUA series (547cc)\u003c\/li\u003e\n  \u003cli\u003eWorks with AX90HU, AX90HUA, AX90HUB, AX90HUC 547cc engines\u003c\/li\u003e\n  \u003cli\u003eCommon equipment: XT1-LT42 and XT1-LT42 C lawn tractors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know this is the correct replacement part?\u003c\/h3\u003e\n\u003cp\u003eConfirm compatibility by matching the part number on your old coil or verifying the engine code on the engine label. The AUTOKAY unit is sold as part number 994-00128 and supersedes the earlier MPN 794-00128.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare part numbers: 994-00128 replaces 794-00128\u003c\/li\u003e\n  \u003cli\u003eMatch your engine code to the included fitment list\u003c\/li\u003e\n  \u003cli\u003eInspect mounting points and connector style for physical fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical benefits of replacing a faulty ignition coil?\u003c\/h3\u003e\n\u003cp\u003eSwapping in a new coil can restore reliable spark delivery, improving starting, idling and throttle response. It’s a targeted repair that often fixes common ignition issues without replacing larger engine components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves ignition consistency for faster starts\u003c\/li\u003e\n  \u003cli\u003eReduces misfires and uneven idling under load\u003c\/li\u003e\n  \u003cli\u003eCost-effective alternative to more extensive engine repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for anyone comfortable with small-engine maintenance: disconnect the spark plug wire, remove the mounting screws, swap the coil, and reconnect. The part ships as a single ignition coil ready for installation; any gaskets, mounting hardware or additional connectors should be inspected from the original unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains 1 x ignition coil (994-00128)\u003c\/li\u003e\n  \u003cli\u003eStandard bolt-on fit for listed engine types—verify hardware on your machine\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer torque and gap specs when fitting the new coil\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The AUTOKAY 994-00128 ignition coil is aimed at homeowners, landscapers and small-engine technicians who own or service lawn tractors and mowers powered by MTD-family 547cc engines. If your equipment is showing starting trouble, stalling, or erratic engine behavior and the engine code matches the fit list, this part is a practical, direct-replacement option to restore ignition function without full engine overhaul.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the AUTOKAY 994-00128 replace part 794-00128?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, 994-00128 is the replacement for prior MPN 794-00128 and fits the same engine families.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this coil fit my Cub Cadet with a 547cc engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Cub Cadet lists a matching engine code (e.g., AX90HUA, 4X90HUA), this coil is compatible.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591478673593,"sku":"B0CG641DZ4","price":62.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-994-00128-front-angle.jpg?v=1790552622"},{"product_id":"autokay-purge-solenoid-valve-36162-raa-a01-for-honda-acura-direct-replacement-vacuum-seal-reliability","title":"AUTOKAY Purge Solenoid Valve 36162-RAA-A01 for Honda\/Acura — Direct Replacement, Vacuum-Seal Reliability","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 36162-RAA-A01 is a direct-replacement canister purge solenoid valve engineered to restore proper evaporative emissions control on compatible Honda and Acura models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis OEM-style purge valve is built to match the fit and function of the factory part number 36162-RAA-A01 (36162RAAA01) for many Honda Accords, Elements and Acura TSX models from 2003 through 2011. When the original valve becomes clogged, cracked or electrically unreliable, the vehicle may trigger a check-engine light or fail an emissions check; this AUTOKAY unit offers a cost-effective replacement manufactured to deliver consistent valve actuation and vacuum sealing.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this purge solenoid valve fit my specific Honda or Acura?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY 36162-RAA-A01 is specified to replace the factory purge valve on numerous Honda and Acura models. It matches electrical connector, vacuum port locations and mounting footprint where OEM guidelines specify this part number. Always verify part numbers and fitment before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers: 36162-RAA-A01, 36162RAAA01.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Honda Accord 2.4L (2003–2007) and various trims.\u003c\/li\u003e\n  \u003cli\u003eFits Honda Element models (2003–2011) including EX, LX and SC trims.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Acura TSX (2004–2005) base sedan models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability features does this replacement offer?\u003c\/h3\u003e\n\u003cp\u003eThe valve is manufactured to provide reliable solenoid switching and a tight seal against vacuum leaks that can cause drivability issues or emissions faults. Materials and electrical terminals are chosen to withstand under-hood conditions and repeated cycling over time. While not an OEM-branded unit, it follows the same functional design to restore system operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-molded housing to maintain vacuum integrity.\u003c\/li\u003e\n  \u003cli\u003eDurable solenoid coil for consistent electrical response.\u003c\/li\u003e\n  \u003cli\u003eStandardized connector and mounting for straightforward replacement.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant terminals to help long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the AUTOKAY purge valve and what should I check afterward?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a straightforward swap: disconnect the negative battery terminal, unplug the electrical connector, release vacuum hoses, remove the mounting fastener and install the new valve in reverse order. After installation, reconnect the battery and clear any stored codes with an OBD-II scanner; drive the vehicle to allow the system to complete its self-tests.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools needed: basic hand tools, OBD-II scanner recommended.\u003c\/li\u003e\n  \u003cli\u003eInspect vacuum hoses and connectors for cracking or wear during replacement.\u003c\/li\u003e\n  \u003cli\u003eClear codes and perform a short drive cycle to verify check-engine light remains off.\u003c\/li\u003e\n  \u003cli\u003eIf error persists, check related EVAP lines, fuel cap condition, and electrical connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOKAY 36162-RAA-A01 purge solenoid valve is aimed at DIY mechanics, independent repair shops and vehicle owners who need an exact-fit, affordable replacement for the factory EVAP purge valve on supported Honda and Acura models. If your vehicle exhibits an EVAP-related fault code, rough idle after fuel fill, or you’re preparing for an emissions test, this part restores the expected functionality when matched to the correct model and year. Always confirm compatibility with your vehicle's VIN, original part number or repair manual prior to purchase; professional installation is recommended if you are not comfortable working on fuel and vacuum systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this AUTOKAY valve replace part number 36162-RAA-A01?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This AUTOKAY unit is sold as a replacement for part numbers 36162-RAA-A01 and 36162RAAA01 for applicable models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will installing this purge valve clear my check-engine light?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replacing a faulty purge valve can clear EVAP-related codes, but you may need to reset codes and complete a drive cycle to verify the light stays off.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591483457721,"sku":"B096TG2JQP","price":68.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-purge-valve-front-view.jpg?v=1790552822"},{"product_id":"autokay-heated-right-passenger-mirror-glass-for-vw-passat-jetta-beetle-2011-2018-direct-fit-anti-glare","title":"AUTOKAY Heated Right Passenger Mirror Glass for VW Passat \/ Jetta \/ Beetle 2011–2018 — Direct-Fit, Anti-Glare","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY's right-side passenger mirror glass is a heated, direct-fit replacement designed to restore clear rearward visibility on 2011–2018 VW Passat, Jetta, and Beetle models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your passenger-side mirror glass is cracked, fogged, or missing heating capability, this AUTOKAY replacement reproduces the OEM fit and essential features so you can drive with better sight lines. Built from quality glass bonded to a heavy-duty ABS backing plate, the unit installs onto the existing mirror assembly and electrical connector without modifications. It brings anti-glare chromed glass and a fast-acting heating element to help clear moisture and frost, while matching the original mounting geometry for a secure, vibration-free fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this mirror clear fog, rain, or frost?\u003c\/h3\u003e\n\n\u003cp\u003eThe built-in heated element warms the glass to disperse moisture and thin ice more quickly than an unheated mirror. It doesn't replace windshield defrost systems but gives targeted heating where condensation commonly obstructs the passenger-side view.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated heating grid for faster de-misting and de-icing\u003c\/li\u003e\n  \u003cli\u003eCompatible with factory wiring—no splicing required\u003c\/li\u003e\n  \u003cli\u003eWorks in conjunction with vehicle's mirror heating controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this mirror fit my Volkswagen without extra parts or tools?\u003c\/h3\u003e\n\n\u003cp\u003eThis AUTOKAY right mirror glass is made to match the factory backing plate and electrical connection for VW Passat, Jetta, and Beetle models from 2011 through 2018. It’s a direct replacement designed for bolt-on or snap-in installation so most owners can swap it themselves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact-fit backing plate mirrors original mounting points\u003c\/li\u003e\n  \u003cli\u003ePre-wired heating contacts align with factory harness\u003c\/li\u003e\n  \u003cli\u003eNo cutting or adapter brackets typically needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the replacement include auto-dimming, blind-spot, or signal lights?\u003c\/h3\u003e\n\n\u003cp\u003eThis glass provides heating and anti-glare (chromed) functionality but does not contain auto-dimming electronics, blind-spot detection sensors, or integrated turn-signal lamps. It replaces the glass and backing plate only; vehicles that originally had advanced features will need the corresponding OEM modules or sensor-equipped glass.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeated and anti-glare chromed glass included\u003c\/li\u003e\n  \u003cli\u003eNo auto-dimming circuitry or blind-spot indicator built in\u003c\/li\u003e\n  \u003cli\u003eNo integrated turn-signal light in this assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the glass and backing plate for everyday use?\u003c\/h3\u003e\n\n\u003cp\u003eAUTOKAY uses high-quality glass and reinforced ABS for the backing plate so the replacement resists deformation and maintains secure attachment under normal road conditions. The construction aims to withstand vibrations, temperature changes, and routine cleaning without losing alignment or heating function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTempered glass surface resists chips and scratches\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty ABS backing plate maintains shape and fitment\u003c\/li\u003e\n  \u003cli\u003eFactory-style bonding minimizes water intrusion risks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers of Volkswagen Passat, Jetta, or Beetle (model years 2011–2018) who need a reliable passenger-side mirror glass replacement with heating and anti-glare performance. It’s suited for DIY installers and repair shops seeking a direct-fit, cost-effective alternative to OEM glass—ideal when original glass is cracked, fogged, or the heating element has failed.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which VW models and years does this mirror fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Volkswagen Passat, Jetta, and Beetle model years 2011 through 2018.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this mirror include blind-spot or auto-dimming features?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No; it includes heating and anti-glare glass but lacks blind-spot and auto-dimming functions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591489224889,"sku":"B0GQGV4P37","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-right-passenger-mirror-front-view.jpg?v=1790552925"},{"product_id":"autokay-air-intake-hose-for-honda-civic-2-0l-2016-2022-direct-fit-17228-5ba-a01-replacement-oem-style","title":"AUTOKAY Air Intake Hose for Honda Civic 2.0L (2016-2022) – Direct-Fit 17228-5BA-A01 Replacement, OEM-Style","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 17228-5BA-A01 is a direct-fit replacement air intake hose engineered to restore proper airflow for Honda Civic 2.0L L4 models from 2016 through 2022.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement air intake hose is built to match the original equipment fitment and function for Honda Civic 2.0L EX, LX, LX-P, and Sport trim levels made between 2016 and 2022. It arrives as a single complete unit, ready to install, and is intended to replace the factory part number 17228-5BA-A01. Using a correct, well-fitting intake hose helps maintain engine breathing, keeps contaminants away from critical components, and supports consistent throttle response.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hose fit my specific Honda Civic model?\u003c\/h3\u003e\n\n\u003cp\u003eYes — this AUTOKAY intake hose is made for Civic models with the 2.0L four-cylinder engine across listed trims and years. Confirming compatibility with your vehicle’s VIN or service manual is recommended before purchase to ensure an exact match.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for part number 17228-5BA-A01\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2016–2022 Honda Civic 2.0L L4: EX, LX, LX-P, Sport\u003c\/li\u003e\n  \u003cli\u003eSold as one new air intake hose, ready for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing the intake hose affect performance and reliability?\u003c\/h3\u003e\n\n\u003cp\u003eA properly sealed and undamaged intake hose preserves engine airflow patterns and reduces the risk of unmetered air entering the intake tract. That stability helps your vehicle’s sensors and engine control unit maintain correct fuel-air balance, which supports steady idling and predictable throttle response.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrevents vacuum leaks that can cause rough idle or hesitation\u003c\/li\u003e\n  \u003cli\u003eProtects the mass airflow sensor and intake components from contamination\u003c\/li\u003e\n  \u003cli\u003eMaintains the intended airflow path for consistent engine operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward when removing the old hose and fitting the replacement to original mounting points and clamps. Basic hand tools are typically all that’s required; however, allow time to inspect surrounding clamps, sensor connections, and adjoining components for wear or damage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInstall in place of factory part 17228-5BA-A01 using existing clamps\u003c\/li\u003e\n  \u003cli\u003eCheck and replace any brittle clamps or worn gaskets during installation\u003c\/li\u003e\n  \u003cli\u003eReconfirm secure connections to avoid vacuum leaks after fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement hose and what maintenance is recommended?\u003c\/h3\u003e\n\n\u003cp\u003eThe replacement hose is manufactured to meet typical OEM material standards for resilient rubber and reinforced sections, designed to withstand the heat and flex of under-hood conditions. Periodic visual inspections for cracks, soft spots, or oil buildup will help you catch wear early and keep the intake tract sealed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt from durable, heat-resistant materials suitable for engine bay conditions\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for cracks, splits, or oil contamination\u003c\/li\u003e\n  \u003cli\u003eReplace immediately if any air leak or structural damage appears\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOKAY 17228-5BA-A01 air intake hose is intended for Honda Civic owners or technicians who need a reliable, OEM-style replacement for 2.0L L4 models from 2016 through 2022. It’s ideal for anyone restoring proper engine breathing after wear, damage, or as part of routine intake system maintenance. If you want a direct-fit part that aligns with the original factory specification and keeps installation simple, this hose is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hose replace part number 17228-5BA-A01?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This AUTOKAY hose is a direct replacement for OEM part 17228-5BA-A01.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit my 2019 Honda Civic Sport 2.0L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits 2016–2022 Honda Civic 2.0L models including the 2019 Sport trim.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591489323193,"sku":"B0CJV24L6Q","price":71.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-air-intake-hose-front-view_35eb02d1-f0ff-44a6-b0d1-9206b98e7f69.jpg?v=1790552946"},{"product_id":"autokay-a-c-refrigerant-liquid-pipe-for-toyota-tacoma-1998-2004-aluminum-oem-fit-88716-04103","title":"AUTOKAY A\/C Refrigerant Liquid Pipe for Toyota Tacoma 1998–2004 — Aluminum OEM-Fit 88716-04103","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 88716-04103 is a direct-fit aluminum A\/C refrigerant pipe cooler engineered to replace the factory line on Toyota Tacoma models from 1998–2004.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Tacoma's air conditioning circulation shows signs of leakage, corrosion, or reduced efficiency, this OEM-style refrigerant liquid pipe from AUTOKAY offers a durable, budget-friendly option. Constructed from corrosion-resistant aluminum and manufactured to strict quality standards, the part is shaped and sized to match the original fitting so installation is straightforward for mechanics or experienced DIYers.\u003c\/p\u003e\n\n\u003ch3\u003eWill this A\/C pipe fit my Toyota Tacoma?\u003c\/h3\u003e\n\u003cp\u003eThis replacement is designed specifically for Toyota Tacoma model years 1998 through 2004 and carries the OEM cross-reference part number 88716-04103. Confirm your vehicle year and compare the existing pipe’s shape and mounting points to the images before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OEM cross-reference: 88716-04103\u003c\/li\u003e\n  \u003cli\u003eFitment range: Toyota Tacoma 1998–2004\u003c\/li\u003e\n  \u003cli\u003eConfirm vehicle year and connector locations prior to purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is this pipe made of and how long will it last?\u003c\/h3\u003e\n\u003cp\u003eThe line is manufactured from high-quality aluminum chosen for strength and corrosion resistance. Aluminum reduces weight compared with steel and resists rust in the refrigerant circuit; longevity depends on installation, surrounding conditions, and maintenance of the A\/C system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: durable, corrosion-resistant aluminum\u003c\/li\u003e\n  \u003cli\u003eBuilt under quality control standards for consistent performance\u003c\/li\u003e\n  \u003cli\u003eDesigned to match original dimensions and mounting for accurate fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward because the part is engineered as an exact-fit replacement. However, A\/C lines carry refrigerant under pressure—properly evacuating and recharging the system requires refrigerant-handling equipment and certification, so plan to use a qualified technician if you lack tools or permits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact-fit design for simplified replacement\u003c\/li\u003e\n  \u003cli\u003eRequires refrigerant recovery and recharge using approved equipment\u003c\/li\u003e\n  \u003cli\u003eRecommended: professional installation if you lack A\/C tools or certification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what should I inspect on arrival?\u003c\/h3\u003e\n\u003cp\u003eThe package ships with one AUTOKAY A\/C refrigerant liquid pipe, shown in product images. Inspect the part for the correct connector types, flanges, and any shipping damage; compare it to your removed pipe so bolt holes and bends align before final installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes: 1 x A\/C pipe (as pictured)\u003c\/li\u003e\n  \u003cli\u003eCheck connectors, bends, and mounting points against your original pipe\u003c\/li\u003e\n  \u003cli\u003eConfirm no dents or transport damage before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and owners of Toyota Tacoma trucks (1998–2004) who need a reliable replacement A\/C refrigerant liquid pipe—whether you're a professional mechanic looking for a direct-fit aftermarket option or a knowledgeable DIYer performing an A\/C circuit repair. If you require a guaranteed match, verify your vehicle model and compare the supplied part number (88716-04103) and visual details with your existing component before purchase. Note: refrigerant handling should be performed by certified technicians unless you possess the proper tools and credentials.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplace Part Number: 88716-04103\u003c\/li\u003e\n  \u003cli\u003eFits for Toyota Tacoma 1998-2004\u003c\/li\u003e\n  \u003cli\u003eEasy to replace, guaranteed exact fit for easy installation, engineered for superior durability\u003c\/li\u003e\n  \u003cli\u003eNote: Please double confirm your vehicle model is exactly same as us before purchase\u003c\/li\u003e\n  \u003cli\u003ePackage Includes: 1Pcs A\/C Pipe Cooler Refrigerant Liquid As picture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pipe fit my 2000 Toyota Tacoma?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the AUTOKAY 88716-04103 is specified to fit Toyota Tacoma model years 1998–2004; verify connector positions before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this pipe without professional A\/C service?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can physically bolt it in, but refrigerant recovery and recharge require certified equipment—professional service is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591658537145,"sku":"B0BNNC4LR7","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-ac-pipe-front-view.jpg?v=1790557064"},{"product_id":"autokay-ignition-coil-module-two-pack-for-kohler-kt-zt-sv-engines-32-584-06-s-direct-replacement-oem-fit","title":"AUTOKAY Ignition Coil Module Two-Pack for Kohler KT ZT SV Engines - 32-584-06-S Direct Replacement, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 32-584-06-S is a direct-replacement ignition coil module sold as a two-pack, designed to restore spark performance on compatible Kohler KT, ZT and SV series engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese AUTOKAY ignition coil modules match the OEM fit and electrical characteristics for many Kohler small engines commonly found in lawn tractors, zero-turn mowers, and other outdoor power equipment. Each kit includes two coil modules manufactured to the part numbers referenced by Kohler (32-584-06-S and its number variants), making them a convenient repair option when a worn or failed coil causes weak spark, misfires, or no-start conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Kohler engines will this coil module work with?\u003c\/h3\u003e\n\u003cp\u003eThis replacement coil is compatible with a wide range of Kohler model families. It fits KT series models (KT600–KT740), ZT series (ZT710–ZT730), and several SV single-cylinder engines used in small engines and walk-behind equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKT series: KT600, KT610, KT620, KT715, KT725, KT730, KT735, KT740\u003c\/li\u003e\n  \u003cli\u003eZT series: ZT710, ZT720, ZT730\u003c\/li\u003e\n  \u003cli\u003eSV series: SV470, SV480, SV530, SV540, SV590, SV600, SV620\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the AUTOKAY ignition coil on my Kohler engine?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for a basic engine repair. Remove the engine cover and locate the existing coil; disconnect the spark plug wire and mounting hardware, transfer any grounding straps or shims, and install the AUTOKAY coil in the same orientation to preserve the air gap to the flywheel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect battery or spark plug for safety before starting.\u003c\/li\u003e\n  \u003cli\u003eNote and reuse mounting hardware, shims, and wire routing for correct alignment.\u003c\/li\u003e\n  \u003cli\u003eSet air gap per Kohler specifications and secure coil to the block.\u003c\/li\u003e\n  \u003cli\u003eReconnect spark plug wire and test engine starting and idle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical and part-number details should I check before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm compatibility by comparing existing coil part numbers or checking your engine model against the supported list. The AUTOKAY replacement references several common OEM identifiers (32-584-06-S and variants) so visual or part-number matching will reduce installation surprises.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement part identifiers: 32-584-06-S, 3258406-S, 3258406 32, 584 06-S, 3258406S, 32 584 06 S\u003c\/li\u003e\n  \u003cli\u003eSold as a pair (package includes two ignition coil modules).\u003c\/li\u003e\n  \u003cli\u003eDesigned for engines using the same mounting footprint and electrical connector style.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this coil pair come ready to use out of the box?\u003c\/h3\u003e\n\u003cp\u003eThe package contains two ignition coil modules and arrives ready for installation, though some jobs may require transfer of original mounting hardware or shims. No additional electronics are included; ensure any engine-specific grounding straps or brackets are reused as needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contents: 2 x ignition coil module\u003c\/li\u003e\n  \u003cli\u003eNo extra gaskets or mounting bolts unless specified by the seller.\u003c\/li\u003e\n  \u003cli\u003eCheck the engine service manual for torque and air-gap specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOKAY 32-584-06-S ignition coil modules suit DIY mechanics, repair shops, and fleet managers who maintain lawn tractors, zero-turn mowers, and other small-engine equipment powered by Kohler KT, ZT, or SV series engines. Choose this two-pack when you need a direct-fit coil replacement that matches Kohler part identifiers, or when you prefer keeping a spare coil on hand for quick field repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this coil replace Kohler part 3258406-S?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. AUTOKAY 32-584-06-S corresponds to Kohler part 3258406-S and its listed variants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many coils are included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes two ignition coil modules (sold as a pair).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591680655545,"sku":"B0BZS87FM1","price":70.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-view-ignition-coil-module.jpg?v=1790557436"},{"product_id":"autokay-engine-cabin-air-filter-kit-for-honda-cr-v-2-4l-2007-2009-oe-fit-restores-airflow","title":"AUTOKAY Engine \u0026 Cabin Air Filter Kit for Honda CR-V 2.4L (2007–2009) — OE-fit, Restores Airflow","description":"\u003cp\u003e\u003cstrong\u003eA paired engine and cabin air filter kit designed to restore airflow and interior air quality for Honda CR-V L4 2.4L models from 2007 to 2009.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis AUTOKAY filter set includes both the engine air filter and the cabin air filter matched to the OE replacement numbers used on 2007–2009 Honda CR-V 2.4L L4 vehicles. The two-piece kit simplifies routine maintenance by providing the primary filtration components you should replace roughly every 12 months or 12,000 miles. Each element is manufactured to fit the factory housings so installation is straightforward for DIYers and technicians alike.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly comes in this AUTOKAY filter kit?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one engine air filter and one cabin air filter, packaged together for convenience. Both parts are produced to align with the factory dimensions and replacement numbers for this CR-V generation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1x engine air filter and 1x cabin air filter\u003c\/li\u003e\n  \u003cli\u003eEngine part cross-references: 17220-RZA-000, 17220RZA000, CA10344\u003c\/li\u003e\n  \u003cli\u003eCabin part cross-references: 80292-SDA-A01, 80292-SDA-407, CF10134\u003c\/li\u003e\n  \u003cli\u003eSupplied ready to fit standard CR-V housings with no trimming required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the engine air filter help my CR-V perform?\u003c\/h3\u003e\n\u003cp\u003eThe engine air filter limits dirt and debris from entering the intake, helping preserve engine components and maintain consistent airflow. Replacing a clogged element reduces strain on the intake system and supports steady combustion behavior under normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents road dust and particles from reaching the engine\u003c\/li\u003e\n  \u003cli\u003eMaintains correct air-fuel balance by restoring designed airflow\u003c\/li\u003e\n  \u003cli\u003eMatches the Honda CR-V L4 2.4L factory dimensions for a secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat benefits does the cabin air filter provide for passengers?\u003c\/h3\u003e\n\u003cp\u003eThe cabin air filter helps trap pollen, dust, and other airborne particles before they enter the passenger compartment through the HVAC system. A fresh cabin filter improves ventilation clarity and reduces dust buildup on vents and interior surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCaptures pollen, dust, and larger airborne contaminants\u003c\/li\u003e\n  \u003cli\u003eImproves HVAC airflow and reduces fan strain when clean\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for Honda part numbers listed for model years 2007–2009\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace these filters and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eAUTOKAY recommends changing both the engine and cabin filters approximately every 12 months or every 12,000 miles, whichever comes first, or sooner if you drive in extremely dusty or polluted environments. Installation is typically quick: the engine filter sits in the airbox under the hood, and the cabin filter is behind the glovebox or a dedicated access panel, depending on the vehicle trim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuggested interval: 12 months \/ 12,000 miles under normal conditions\u003c\/li\u003e\n  \u003cli\u003eEngine filter: accessible in the engine bay airbox; no special tools usually required\u003c\/li\u003e\n  \u003cli\u003eCabin filter: accessible behind glovebox or access panel; straightforward replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY engine and cabin air filter kit is suited for Honda CR-V owners with 2.4L L4 engines from model years 2007–2009 who want a direct-fit, OE-referenced replacement set. It’s ideal for DIYers who perform routine maintenance themselves, independent mechanics stocking common replacement parts, and drivers seeking to refresh both engine intake protection and interior air filtration in a single purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these AUTOKAY filters fit Honda CR-V 2007–2009 2.4L engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They match factory dimensions and cross-reference Honda part numbers for 2007–2009 CR-V L4 2.4L models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the engine and cabin filters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace both every 12 months or about 12,000 miles under normal driving; sooner in dusty or polluted conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591723974841,"sku":"B0FKB326T8","price":64.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-packaging-honda-crv-filters.jpg?v=1790558271"},{"product_id":"autokay-powerstroke-6-0-icp-sensor-1845428c92-for-ford-2004-2007-oe-fit-direct-replacement","title":"AUTOKAY Powerstroke 6.0 ICP Sensor 1845428C92 for Ford 2004–2007 — OE-Fit Direct Replacement","description":"\u003cstrong\u003eAUTOKAY Powerstroke 6.0 ICP Sensor 1845428C92 is a direct-fit fuel\/injection control pressure sensor designed to restore accurate rail pressure readings on 2004–2007 Ford 6.0L diesel trucks.\u003c\/strong\u003e\n\n\u003cp\u003eThis precision-engineered sensor replaces worn or failing ICP units on compatible Ford models, helping the engine computer monitor and regulate injection control pressure. Built to match OE fit and electrical specifications, the AUTOKAY unit ships as a single sensor and includes the listed OEM reference to simplify identification and installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eBy delivering accurate injection control pressure feedback to the engine control module, the sensor ensures the fuel system reacts correctly under varying loads. That consistency helps the fuel pump, injectors, and timing strategies operate as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides stable pressure readings for reliable fuel metering\u003c\/li\u003e\n  \u003cli\u003eHelps reduce erratic fuel trims caused by faulty signals\u003c\/li\u003e\n  \u003cli\u003eDesigned to match OE electrical and thread specifications for a tight seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Ford models and years is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis AUTOKAY ICP sensor fits a range of Ford 6.0L diesel vans, trucks, and chassis-cab models from 2004 through 2007. Confirm cross-reference numbers and VIN fitment before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2004–2005 Ford E-350 Club Wagon and E-350 Super Duty\u003c\/li\u003e\n  \u003cli\u003e2004–2007 Ford E-450 Super Duty and Excursion\u003c\/li\u003e\n  \u003cli\u003e2004–2007 Ford F-250, F-350, F-450, F-550, F-650, and F-750 Super Duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the part references and what's included in the package?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY unit is supplied to align with common OE references to simplify part matching. A single sensor is enclosed in the package, ready for direct replacement without additional hardware in most installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 x Fuel Pressure \/ Injection Control Pressure (ICP) Sensor\u003c\/li\u003e\n  \u003cli\u003eOE reference numbers: 1845428C92 and cross-reference 1845428C91 \/ 4C3Z-9F383-AB\u003c\/li\u003e\n  \u003cli\u003eDirect-fit electrical connector and standard thread sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward or should I visit a mechanic?\u003c\/h3\u003e\n\u003cp\u003eFor mechanically proficient owners, the swap is typically straightforward with basic hand tools and attention to safety when working on a live fuel system. If you lack diesel experience or diagnostic equipment, professional installation ensures correct torquing and electrical testing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires basic hand tools and safe depressurization of the fuel system\u003c\/li\u003e\n  \u003cli\u003eVerify electrical connector seating and absence of fuel leaks after install\u003c\/li\u003e\n  \u003cli\u003eScan for codes and clear\/reset learned values if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOKAY Powerstroke 6.0 ICP Sensor is for owners, fleet managers, and technicians maintaining 2004–2007 Ford 6.0L diesel vans and trucks who need a reliable, OEM-referenced replacement sensor. Choose this unit when replacing a failed or questionable ICP sensor to restore consistent injection control pressure readings and simplify diagnostics. Always confirm vehicle compatibility by VIN or OE cross-reference before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this AUTOKAY sensor fit my 2006 Ford F-350?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s compatible with 2004–2007 F-350 6.0L Powerstroke models; confirm with your VIN or OE part cross-reference.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the box and is additional hardware needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package contains one ICP\/fuel pressure sensor; typically no extra hardware is required for direct-fit replacements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591815495865,"sku":"B014GX94KI","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-icp-sensor-front-view.jpg?v=1790558746"},{"product_id":"autokay-pz20-carburetor-kit-for-50-125cc-chinese-atvs-pit-bikes-includes-manifold-filters","title":"AUTOKAY PZ20 Carburetor Kit for 50–125cc Chinese ATVs \u0026 Pit Bikes, Includes Manifold \u0026 Filters","description":"\u003cp\u003e\u003cstrong\u003eCompact PZ20 carburetor kit by AUTOKAY designed as a drop-in aftermarket replacement for many 50cc–125cc Chinese 4-stroke ATVs, go-karts, and dirt bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis AUTOKAY PZ20 kit supplies the parts needed to restore fuel delivery on a wide range of small-displacement 4-stroke machines. Built to match common OEM dimensions, the assembly includes the carburetor plus gaskets, filters, lines, an intake manifold and basic hardware so you can replace a worn or clogged unit without hunting for extra pieces. It’s intended for popular Chinese-brand models and many common 50cc–125cc pit bikes and quads.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this AUTOKAY PZ20 carburetor work with?\u003c\/h3\u003e\n\u003cp\u003eThe kit fits a broad set of Chinese 4-stroke vehicles and aftermarket bikes in the 50–125cc range. It’s compatible with many TaoTao and Coolster models and is commonly used on Lifan, Kazuma, Baja, and similar machines. Check your engine specs and inlet size before ordering to ensure a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible families: TaoTao ATVs (multiple ATA models), Coolster 110\/125 lines, Venom, X-pro, Icebear, Baja and more.\u003c\/li\u003e\n  \u003cli\u003eWorks with many 50cc–125cc pit\/dirt bikes including SSR, SDG, Lifan and Xmotos models.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with some dedicated series (e.g., certain DB or small OEM-specific CRF50\/XR50 variants); verify model fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and tuning for a non-professional?\u003c\/h3\u003e\n\u003cp\u003eThe package is aimed at do-it-yourselfers: the PZ20 body and supplied intake pieces are designed to bolt in with common hand tools. Basic adjustments for idle speed and air\/fuel mixture are accessible; if you know how to adjust a carb idle screw and mixture screw, you can tune it at the roadside or in your garage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes intake manifold, gaskets, O-ring and necessary screws for a single-unit swap.\u003c\/li\u003e\n  \u003cli\u003eComes with fuel and air filters plus a fuel line to minimize additional purchases.\u003c\/li\u003e\n  \u003cli\u003eAdjustable idle and mixture screws for straightforward on-vehicle tuning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles the carburetor with key consumables so you don’t need extra sourcing. Fresh gaskets, a new fuel filter and a clean air filter reduce the chance of installation leaks and immediate contamination-related issues. A plug and basic mounting hardware help you complete the job in one visit to the workbench.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarburetor body (PZ20) sized for small 4-stroke engines.\u003c\/li\u003e\n  \u003cli\u003eGaskets, O-ring, intake manifold and mounting screws to ensure a sealed fit.\u003c\/li\u003e\n  \u003cli\u003eFuel filter, air filter, fuel line and a spark plug included for convenience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this AUTOKAY carburetor last and support reliable performance?\u003c\/h3\u003e\n\u003cp\u003eAUTOKAY manufactures this PZ20 replacement to meet standard aftermarket quality checks for materials and machining. While aftermarket parts vary, provision of fresh seals and filters combined with correct tuning typically restores expected throttle response and starting reliability for many small bikes and quads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed to common aftermarket tolerances for consistent fitment.\u003c\/li\u003e\n  \u003cli\u003eSupplied consumables help prevent early contamination and leaks after installation.\u003c\/li\u003e\n  \u003cli\u003eDesigned for user adjustment to match altitude and fuel differences.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, hobbyists and small-vehicle mechanics looking to replace a failing or clogged carburetor on 50cc–125cc Chinese-made ATVs, go-karts and pit bikes will benefit from this kit. It’s particularly useful for owners of TaoTao and Coolster models, garage DIYers who prefer a single-kit solution, and repair shops that need a reliable aftermarket option with included mounting parts and filters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the PZ20 kit fit TaoTao and Coolster 110–125cc models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits many TaoTao and Coolster 110–125cc models but confirm your intake diameter and model series first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are installation parts included in the AUTOKAY kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes gaskets, intake manifold, fuel\/air filters, fuel line, screws and a spark plug.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67591911899321,"sku":"B07L5D9YR8","price":69.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-pz20-front-view-carburetor.jpg?v=1790559953"},{"product_id":"autokay-carburetor-for-47cc-49cc-pocket-bike-coolster-qg50-db49a-compatible-kit-with-air-filter-gasket","title":"AUTOKAY Carburetor for 47cc–49cc Pocket Bike — COOLSTER QG50 DB49A Compatible Kit with Air Filter \u0026 Gasket","description":"\u003cp\u003e\u003cstrong\u003eA complete AUTOKAY replacement carburetor kit designed to restore smooth throttle response and reliable fuel delivery on 47cc–49cc 2‑stroke mini pocket bikes like the COOLSTER QG50 DB49A.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis OEM‑style carburetor bundle from AUTOKAY includes all the basic parts needed to swap out a worn or damaged carburetor and get a small dirt bike, pocket bike, or scooter running again. The kit comes with the carb body, a compact foam air filter, gasket, fuel lines and an inline fuel filter so you can install it quickly and avoid scavenging parts from several sources. It’s engineered for compatibility with many 47cc–49cc 2‑stroke engines and matches common mounting and fuel inlet configurations found on COOLSTER QG50 DB49A style bikes.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my 47cc or 49cc pocket bike?\u003c\/h3\u003e\n\u003cp\u003eYes — the AUTOKAY unit is made to be compatible with most 47cc and 49cc mini dirt bikes and pocket bikes that use a similar carburetor flange and fuel inlet layout. Check the flange bolt spacing and fuel line diameter on your bike to confirm fitment before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 47cc–49cc 2‑stroke mini engines\u003c\/li\u003e\n  \u003cli\u003eMatches common bolt pattern used on COOLSTER QG50 DB49A models\u003c\/li\u003e\n  \u003cli\u003eIncludes fuel lines and gasket to simplify installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation for a DIY mechanic?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward with basic hand tools and a few minutes of mechanical experience. The kit contains the main components you’ll need, so you won’t have to source small parts separately; however, you should clean mounting surfaces and adjust idle\/air screws after fitting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes carburetor, air filter, gasket, fuel lines, and inline fuel filter\u003c\/li\u003e\n  \u003cli\u003eRequires common hand tools: screwdriver, wrench, pliers\u003c\/li\u003e\n  \u003cli\u003eRecommended to tune idle and mixture after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance changes should I expect after replacing the carburetor?\u003c\/h3\u003e\n\u003cp\u003eReplacing a clogged or leaky carburetor typically improves throttle response, smoother idling, and easier starting. This AUTOKAY kit restores consistent fuel delivery but tuning may be required to match your exhaust, airbox, or altitude for optimal running.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBetter throttle response versus a fouled stock carb\u003c\/li\u003e\n  \u003cli\u003eSmoother idle and more predictable acceleration\u003c\/li\u003e\n  \u003cli\u003eTuning adjustments may be necessary for peak performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what should I inspect first?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one carburetor, one foam-style air filter, one mounting gasket, two lengths of fuel line, and one small inline fuel filter. On arrival, verify the gasket and fuel lines are intact, and inspect the carburetor flange, throttle shaft, and choke linkage for smooth operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × AUTOKAY carburetor (main body)\u003c\/li\u003e\n  \u003cli\u003e1 × foam air filter, 1 × carburetor gasket\u003c\/li\u003e\n  \u003cli\u003e2 × fuel lines and 1 × inline fuel filter included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: If you own a COOLSTER QG50 DB49A style pocket bike, a 47cc–49cc mini dirt bike, or any similar small two‑stroke machine and you’re facing hard starting, poor idle, or fuel leaks, this AUTOKAY replacement kit provides a cost‑effective way to restore reliable fueling. It’s ideal for home mechanics, hobby riders, and repair shops that need a ready‑to‑install carburetor with the basic accessories included. Note: always compare physical dimensions and mounting details to your original carburetor before purchase to ensure fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor compatible with COOLSTER QG50 DB49A?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is designed for COOLSTER QG50 DB49A style 47cc–49cc 2‑stroke bikes, but verify flange spacing and fuel inlet size first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include fuel lines and a filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the package includes two fuel lines and one inline fuel filter along with the carb, filter, and gasket.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67592644722873,"sku":"B0899ZQ4MZ","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-carburetor-front-view_2620436a-f4a4-445c-aa7a-2a2964811a37.jpg?v=1790566693"},{"product_id":"autokay-pcv-ccv-valve-and-breather-hose-kit-for-jeep-grand-cherokee-wrangler-cherokee-1997-2004-2-pcv-valves-grommets-hose","title":"AUTOKAY PCV\/CCV Valve and Breather Hose Kit for Jeep Grand Cherokee Wrangler Cherokee 1997–2004 — 2 PCV Valves, Grommets \u0026 Hose","description":"\u003cp\u003e\u003cstrong\u003eA complete AUTOKAY PCV\/CCV elbow, grommet, and crankcase breather hose kit designed to replace worn or leaking valve components on compatible Jeep 1997–2004 models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis aftermarket repair kit includes the key components that control crankcase ventilation: two PCV valves, two grommets, and one crankcase vent tube breather hose. It’s supplied to match OEM replacement numbers and intended to restore a sealed, routed ventilation path for the engine’s crankcase on select Jeep Grand Cherokee, Wrangler, and Cherokee model years. The parts are sized and molded to fit common mounting points and connections used in the factory assembly.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Jeep models and years does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY kit is built to fit a range of Jeep models from the late 1990s through the early 2000s. It lists compatibility with Grand Cherokee, Wrangler, and Cherokee across the specified years; always verify against your vehicle’s VIN or existing part numbers before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGrand Cherokee: 2000, 2001, 2002, 2003, 2004\u003c\/li\u003e\n  \u003cli\u003eWrangler: 2000, 2001, 2002, 2003, 2004\u003c\/li\u003e\n  \u003cli\u003eCherokee: 1997, 1998, 1999, 2000, 2001\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part numbers: 53013360AA, 2946079, 04854265, 53030497\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how are they used?\u003c\/h3\u003e\n\u003cp\u003eThis kit supplies the small but essential parts that route and control blow-by gases from the crankcase back into the intake system. Each piece is intended as a direct replacement for the original components that wear, crack, or clog over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 PCV valves — regulate pressure and flow from the crankcase.\u003c\/li\u003e\n  \u003cli\u003e2 rubber grommets — secure the valves and provide a sealing interface.\u003c\/li\u003e\n  \u003cli\u003e1 breather hose — connects crankcase vents to the intake or valve cover.\u003c\/li\u003e\n  \u003cli\u003eAll parts pre-shaped to match factory mounting points for straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will installing this kit affect engine operation?\u003c\/h3\u003e\n\u003cp\u003eReplacing degraded PCV\/CCV components helps maintain correct crankcase ventilation and can prevent oil leaks, rough idling, or increased emissions caused by malfunctioning valves or cracked hoses. It restores the intended path for blow-by gases, supporting consistent engine breathing and oil control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces chances of vacuum leaks at worn valve or grommet joints.\u003c\/li\u003e\n  \u003cli\u003eHelps limit oil contamination in the intake tract from improper venting.\u003c\/li\u003e\n  \u003cli\u003eSupports more stable idle and throttle response by maintaining correct crankcase flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this kit easy to install, and what should I check during replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally straightforward for anyone comfortable with basic engine work; the kit’s components are designed to press or clip into the same locations as the originals. Inspect surrounding hoses and vacuum lines while replacing these parts and confirm that mating surfaces are clean for a reliable seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-press grommets into the valve cover openings until fully seated.\u003c\/li\u003e\n  \u003cli\u003eConfirm PCV valves are oriented correctly for flow direction before installation.\u003c\/li\u003e\n  \u003cli\u003eTrim or route the breather hose to avoid kinks and heat sources when fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers and DIY mechanics who own a compatible Jeep Grand Cherokee, Wrangler, or Cherokee from the listed years and need a focused parts pack to refresh the crankcase ventilation system. This kit suits routine maintenance, pre-purchase repairs, and owners addressing oil leaks, idle irregularities, or vacuum-related issues where the original PCV\/CCV components have aged or failed. Always cross-check your vehicle’s part numbers for exact fitment before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit replace OEM part number 53013360AA?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit lists 53013360AA among its replacement part numbers; verify your vehicle’s OEM number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this kit myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed for DIY installation with basic tools; ensure clean sealing surfaces and correct valve orientation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593018278073,"sku":"B0DHZD559P","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-kit-layout.jpg?v=1790571105"},{"product_id":"autokay-left-driver-side-mirror-glass-for-silverado-tahoe-suburban-2003-2006-heated-glass-with-integrated-turn-signal-oem-fit","title":"AUTOKAY Left Driver-Side Mirror Glass for Silverado Tahoe Suburban 2003–2006 — Heated Glass with Integrated Turn Signal, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY left driver-side mirror glass is a direct-fit replacement for 2003–2006 Chevrolet and GMC trucks and SUVs, offering heated glass and an integrated turn signal for improved visibility and safety.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the factory left exterior mirror on your Silverado, Tahoe, Suburban, Avalanche, Sierra, Yukon XL or Escalade has cracked, lost heating, or the turn-signal function failed, this AUTOKAY replacement glass restores original appearance and electrical features without modifying the vehicle. Built to match OEM fitment and connector types, it’s intended as a plug-and-play swap that preserves factory wiring and mounting points.\u003c\/p\u003e\n\n\u003ch3\u003eWill this mirror glass fit my vehicle and replace the correct OEM part?\u003c\/h3\u003e\n\u003cp\u003eThis left-side mirror is engineered to replace several original part numbers and fits model years commonly sharing the same mirror assemblies. Confirm compatibility by cross-referencing your vehicle and existing part number before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible makes\/models: Chevy Avalanche, Silverado, Suburban, Tahoe; GMC Sierra, Yukon XL; Cadillac Escalade ESV\/EXT (2003–2007).\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers: 88944391, 56318, A2GM102L, GM1324102 and related suffixes.\u003c\/li\u003e\n  \u003cli\u003eLeft driver-side orientation — designed for exterior door mirror assemblies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the heated glass and turn signal work on this replacement?\u003c\/h3\u003e\n\u003cp\u003eThe mirror glass includes a built-in heating element and a visible turn-signal lamp to clear moisture and communicate lane-change intentions. AUTOKAY supplies compatible connector types so the functions reconnect to your vehicle’s electrical system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeating: 2-pin heating connector to remove fog, frost, and light ice.\u003c\/li\u003e\n  \u003cli\u003eTurn signal: integrated lamp with 2-pin and 4-pin converter included for wiring compatibility.\u003c\/li\u003e\n  \u003cli\u003eDesigned to match factory electrical behavior — no splicing if connectors match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does this mirror offer?\u003c\/h3\u003e\n\u003cp\u003eConstructed from high-quality mirror glass bonded to a rugged ABS backing, this replacement prioritizes long-term stability and optical clarity. The assembly resists deformation and keeps a wide viewing angle for driver awareness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium reflective glass for clear, distortion-free sightlines.\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty ABS backing for impact resistance and secure mounting.\u003c\/li\u003e\n  \u003cli\u003eBuilt to withstand road vibration and common weather exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools or steps are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward and mirror the original factory process. No specialized tools are required if your mirror housing and connectors match factory specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement — aligns with factory clips and housing without modification.\u003c\/li\u003e\n  \u003cli\u003eReconnects to existing wiring harness using supplied converter if needed.\u003c\/li\u003e\n  \u003cli\u003eTypical install: remove damaged glass, unplug old connectors, snap new glass into place, test heating and turn signal functions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and DIY mechanics owning compatible 2003–2006 Chevy, GMC, or Cadillac trucks and SUVs who want an OEM-style replacement mirror with heating and turn-signal features. It’s suitable for those seeking an economical repair that restores original functionality and appearance without professional body-shop labor.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this mirror fit my 2005 Chevy Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this AUTOKAY left driver mirror fits 2003–2006 Chevy Silverado models; verify by matching your OEM part number listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the heating function compatible with factory wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the mirror uses a 2-pin heating connector and includes a turn-signal converter for typical factory harnesses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593046065337,"sku":"B0G1M9GF8J","price":57.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-left-driver-side-mirror-front-view.jpg?v=1790571349"},{"product_id":"autokay-hepa-cabin-engine-air-filter-set-for-nissan-rogue-mitsubishi-outlander-1-cabin-hepa-1-engine-filter-direct-fit","title":"AUTOKAY HEPA Cabin \u0026 Engine Air Filter Set for Nissan Rogue \u0026 Mitsubishi Outlander — 1 Cabin HEPA + 1 Engine Filter, Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY HEPA cabin and engine air filter set replaces factory filters to help keep the air inside your Rogue or Outlander cleaner and the engine running with proper airflow.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement pair includes a high-efficiency cabin HEPA filter plus a matched engine air filter manufactured to fit specified Nissan Rogue and Mitsubishi Outlander gasoline and hybrid models. Each filter is designed as a direct-fit aftermarket alternative to the listed OEM part numbers, making installation straightforward and maintenance predictable. The set is packaged together so you can service both the cabin breathing air and engine intake at the same time.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Nissan and Mitsubishi models are compatible with this AUTOKAY filter set?\u003c\/h3\u003e\n\u003cp\u003eThe filters are engineered for recent model years and specific engine variants. They are not universal—verify your vehicle’s engine size and model year before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Nissan Rogue: gas 1.5L (2022–2026) and gas 2.5L (2021–2023). Not compatible with Rogue 2.4L or Rogue Sport.\u003c\/li\u003e\n  \u003cli\u003eFits Mitsubishi Outlander: gas 2.5L (2022–2025) and Outlander Hybrid 1.5L (2026). Not compatible with Outlander 2.4L, Outlander Sport, or Outlander PHEV.\u003c\/li\u003e\n  \u003cli\u003eCross-references included so buyers can check against factory part numbers before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat OEM part numbers does this AUTOKAY set replace?\u003c\/h3\u003e\n\u003cp\u003eThis set is supplied as direct-fit replacements for multiple factory part numbers for both cabin and engine filters. Use the cross-list to confirm exact compatibility with your vehicle’s maintenance guide.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCabin air filter cross-references: 27277-5NA1A, 27277-6RC0A, 27277-6CA0A, 27277-6CA1A, 272776RR0A, 27277-VS20A, 7803A004, 7803A109, 7803A043, 7803A112, PC99452C, CF12552, CF10140.\u003c\/li\u003e\n  \u003cli\u003eEngine air filter cross-references: 16546-6RA0A, 165466RA0A, AX000036, WA11431, PA99814, CA12967.\u003c\/li\u003e\n  \u003cli\u003ePackage includes one cabin HEPA filter and one engine air filter for simultaneous service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace these AUTOKAY filters and how will I know?\u003c\/h3\u003e\n\u003cp\u003eReplacement frequency depends on driving conditions and environment, but following a mileage interval keeps airflow and air quality consistent. Replace sooner in dusty, urban, or high-pollen environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer recommendation: replace approximately every 20,000 miles under normal driving conditions.\u003c\/li\u003e\n  \u003cli\u003eReplace sooner if you notice reduced HVAC airflow, increased cabin dust, or degraded engine performance.\u003c\/li\u003e\n  \u003cli\u003eInspect visually during regular service: visible dirt, discoloration, or clogging indicates replacement is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat benefits and installation expectations should I have with this AUTOKAY filter set?\u003c\/h3\u003e\n\u003cp\u003eThe filters are built to match OEM fit and function so installation is typically quick and requires only basic hand tools. The cabin HEPA layer captures fine particles while the engine filter maintains proper engine air intake protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-style fit ensures clean sealing and easy alignment with factory housings.\u003c\/li\u003e\n  \u003cli\u003eCabin HEPA media targets fine particulates and allergens to improve in-car air quality.\u003c\/li\u003e\n  \u003cli\u003eEngine filter media protects intake components from debris and helps preserve engine efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers of Nissan Rogue (specified 1.5L and 2.5L years) and Mitsubishi Outlander (specified 2.5L and 1.5L Hybrid year) who want a convenient dual-filter service kit matching common OEM part numbers. It’s suited to vehicle owners performing routine maintenance themselves, independent mechanics, or anyone replacing both cabin and engine filters at once for consistent fit and straightforward installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this set fit my 2023 Nissan Rogue?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your 2023 Rogue uses the 2.5L gasoline engine; verify against listed part numbers before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many filters are included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package contains one cabin HEPA air filter and one engine air filter for simultaneous replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593085681849,"sku":"B0FF9X5TJN","price":68.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-packaging-rouge-outlander-filters.jpg?v=1790571701"},{"product_id":"autokay-gx160-gx200-carburetor-replacement-kit-for-honda-gx120-gx200-complete-gasket-fuel-line-kit","title":"AUTOKAY GX160\/GX200 Carburetor Replacement Kit for Honda GX120–GX200 – Complete Gasket \u0026 Fuel Line Kit","description":"\u003cstrong\u003eA complete aftermarket carburetor assembly designed to replace OEM Honda GX-series carburetors and restore reliable fueling for small engines.\u003c\/strong\u003e\n\n\u003cp\u003eIf your GX-series engine is running rough, leaking fuel, or won’t keep a steady idle, a worn or damaged carburetor is often the cause. The AUTOKAY GX160\/GX200 carburetor is a full replacement kit compatible with many Honda GX120–GX200 models and a wide range of other small engines, including some Predator, Homelite, Baja, Central Machinery and Tecumseh applications. This kit arrives with gaskets, fuel line, filter and essential hardware so you can swap the unit and get equipment back to work quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and machines will this carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThis carburetor is formulated to replace several Honda part numbers and match common bolt patterns and fuel ports on GX120, GX140, GX160, GX168 and GX200 engines. It also fits many aftermarket and OEM clones used in generators, pumps, pressure washers, mini bikes and go-kart engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect Honda compatibility: replaces 16100-ZLO-W51, 16100-ZH8-W61, 16100-ZE1-814, 16100-ZE1-825.\u003c\/li\u003e\n  \u003cli\u003eCommonly used on WP20X\/WT20X pumps, EG1400\/EG2200\/EG2500 generators, and HS series blowers.\u003c\/li\u003e\n  \u003cli\u003eInterchange with selected Predator 212cc, Homelite and Central Machinery small engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and why it matters?\u003c\/h3\u003e\n\u003cp\u003eRather than shipping only the carburetor body, AUTOKAY provides a complete service kit so you can replace gaskets, lines and other wear items in one visit. That reduces troubleshooting time and ensures all seal points and fuel passages are freshly installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x carburetor body plus 3x gaskets for secure mating.\u003c\/li\u003e\n  \u003cli\u003eFuel line and inline fuel filter to prevent debris intake.\u003c\/li\u003e\n  \u003cli\u003eSpare spark plug, flameout switch, nozzle, oil circuit switch, air filter and mounting spring set.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and tune-up after swap?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic small-engine maintenance. The kit uses standard mounting points and fuel fittings; after mechanical installation you’ll likely need minor idle and mixture adjustments following the engine manufacturer's procedure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard bolt pattern fits most GX-series manifolds—no special adapters required.\u003c\/li\u003e\n  \u003cli\u003eSimple fuel line and filter connections; clip or clamp the included line in place.\u003c\/li\u003e\n  \u003cli\u003eAdjust idle and mixture screws to fine-tune combustion; test under load for final settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this carburetor address leaks, hard starts, and poor idle?\u003c\/h3\u003e\n\u003cp\u003eYes—replacing a degraded carburetor assembly and worn gaskets resolves many fuel-related symptoms, including flooding, fuel drip, weak compression start issues related to fuel delivery, and inconsistent idle response. However, also check ignition and compression when diagnosing persistent problems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew gaskets and seals eliminate old seepage paths.\u003c\/li\u003e\n  \u003cli\u003eFresh fuel filter reduces clogged jets and passages.\u003c\/li\u003e\n  \u003cli\u003eComplete hardware minimizes the need for additional parts purchases.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Mechanics, fleet managers, and DIY owners of compact equipment who need a reliable carburetor replacement for Honda GX-series engines or compatible aftermarket models. The AUTOKAY kit is tailored for users who prefer a full-service replacement—carburetor plus all commonly replaced consumables—so machines return to dependable operation with a single repair session. Always verify part numbers and manifold compatibility before ordering to ensure fitment with your specific engine model.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor fit Honda GX160 and GX200 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It replaces several OEM Honda GX-series part numbers and fits GX120–GX200 engines with standard bolt patterns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are gaskets and fuel line included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes gaskets, fuel line, fuel filter and other essential installation parts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593150988473,"sku":"B09CFT16J4","price":62.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-carburetor-front-view_eebfd3ad-ad38-41aa-b5d6-74dff5f56f32.jpg?v=1790572412"},{"product_id":"autokay-bumper-retainer-brackets-for-mazda-3-2014-2018-2-piece-direct-fit-pair-oem-style-fit","title":"AUTOKAY bumper retainer brackets for Mazda 3 (2014–2018) — 2-piece direct-fit pair, OEM-style fit","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY bumper retainers brackets kit gives you two direct-fit mounting brackets designed to secure front and rear bumpers on select Mazda 3 models for a factory-style fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two aftermarket bumper retainers from AUTOKAY replace several Mazda part numbers and are made to restore proper bumper alignment and attachment after collision damage or wear. Each kit contains one driver-side and one passenger-side bracket engineered to match the original mounting points on many Mazda 3 sedans and hatchbacks from 2014 through 2018. The components are sold as a pair so both sides can be repaired together for consistent fit and finish.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Mazda 3 model years and trims are compatible with this kit?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY retainers fit a broad range of Mazda 3 sedans and hatchbacks across multiple trim levels from 2014–2018. Compatibility covers early i and s trims through Grand Touring and Sport designations, as well as GS\/GT\/GX submodels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 2014–2018 Mazda 3 sedans and 2014–2018 Sport\/Grand Touring hatchbacks where listed.\u003c\/li\u003e\n  \u003cli\u003eCovers submodels GS, GT, GX and trim levels like i, s, Sport, Touring, Grand Touring.\u003c\/li\u003e\n  \u003cli\u003eRefer to the vehicle fit list before purchase for exact year\/trim matches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit help during bumper repair or replacement?\u003c\/h3\u003e\n\u003cp\u003eThese retainers recreate factory mounting points so the bumper sits flush and remains securely attached. Using the correct brackets reduces panel gaps, prevents movement or rattles, and helps align the bumper for painting or final installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces worn or broken mounting clips to restore original alignment.\u003c\/li\u003e\n  \u003cli\u003ePrevents loose or sagging bumpers that can create noise or further damage.\u003c\/li\u003e\n  \u003cli\u003eHelps achieve consistent spacing for a professional-looking repair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how simple is installation?\u003c\/h3\u003e\n\u003cp\u003eThe package contains two molded retainer brackets—one for the driver side and one for the passenger side—ready to bolt into the factory mounting locations. Installation typically requires basic hand tools and removing the bumper cover to access the original mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contents: 1 driver-side bracket and 1 passenger-side bracket.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacements for listed Mazda part numbers (see product details).\u003c\/li\u003e\n  \u003cli\u003eInstallation: remove bumper, unbolt old retainers, install new brackets, refit bumper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these AUTOKAY retainers equivalent to OEM parts?\u003c\/h3\u003e\n\u003cp\u003eThese retainers are aftermarket components designed to match OEM form and function for the specified Mazda part numbers. They are intended as like-for-like replacements so you can restore original mounting geometry without sourcing dealer parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to replace Mazda part numbers such as BHN1500T1F, BJS7500T1C and others.\u003c\/li\u003e\n  \u003cli\u003eEngineered to align with factory bolt and clip positions for a straightforward swap.\u003c\/li\u003e\n  \u003cli\u003eSold as a two-piece set so both sides can be matched for consistent fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY bumper retainers brackets kit is aimed at do-it-yourself mechanics, body shop technicians, and Mazda owners who need a reliable replacement for broken or missing bumper mounting brackets on compatible Mazda 3 sedans and hatchbacks. If you want to restore proper bumper alignment without purchasing dealer-only parts, this pair offers a practical, direct-fit option to finish cosmetic repairs or collision restorations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these brackets fit my 2015 Mazda 3 Sport?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit supports many 2014–2016 and 2017–2018 Mazda 3 Sport and sedan trims—verify your exact submodel against the fit list.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are both driver and passenger retainers included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes one driver-side and one passenger-side bumper retainer bracket.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593256960185,"sku":"B0CNKCFD8R","price":57.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-packaging-mazda3-bumper-bracket.jpg?v=1790573655"},{"product_id":"autokay-brake-master-cylinder-for-hammerhead-80t-trailmaster-mid-mid-size-go-kart-integrated-reservoir","title":"AUTOKAY Brake Master Cylinder for Hammerhead 80T \u0026 TrailMaster MID — Mid-Size Go-Kart, Integrated Reservoir","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY's Hammerhead 80T \/ TrailMaster MID brake master cylinder is a direct-fit, single-port hydraulic unit with reservoir designed to operate the rear brake on compatible go-karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement master cylinder is engineered for mid-size go-kart platforms such as Hammerhead 80T and TrailMaster Mid models, plus many mid-frame American Sportworks and similar Chinese-manufactured karts. It combines a compact footprint with universal mounting dimensions to simplify installation when upgrading or repairing the rear braking system. The assembly includes the reservoir and is delivered ready to mount and plumb into an existing hydraulic brake line.\u003c\/p\u003e\n\n\u003ch3\u003eWill this master cylinder fit my Hammerhead 80T or TrailMaster Mid?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the unit is specified to fit Hammerhead 80T and TrailMaster Mid go-karts and fits many mid-size American Sportworks frames and similar Chinese-brand karts. Check your kart's mounting bolt spacing and fluid line arrangement before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOverall base length: 4 1\/4\" for compatibility with typical mid-frame mounts\u003c\/li\u003e\n  \u003cli\u003eMounting bolt center-to-center spacing: 1 3\/4\"\u003c\/li\u003e\n  \u003cli\u003eSingle outlet port configured for rear brake caliper plumbing\u003c\/li\u003e\n  \u003cli\u003eIncludes reservoir assembly for a complete master cylinder package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what do I need?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone familiar with go-kart brake systems: remove the old master cylinder, match the mounting spacing, connect the brake line to the single port, and bleed the system. Basic hand tools and brake-bleeding supplies are required to complete the job safely.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTools: wrenches matching mounting bolts and banjo\/line fittings\u003c\/li\u003e\n  \u003cli\u003eConsumables: compatible DOT brake fluid and a bleed kit\u003c\/li\u003e\n  \u003cli\u003eChecklist: verify mount spacing (1 3\/4\") and overall base length (4 1\/4\")\u003c\/li\u003e\n  \u003cli\u003eTip: bench-fit before final installation to confirm hose alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and maintenance should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThis hydraulic master cylinder delivers consistent rear braking when properly installed and serviced; performance depends on caliper condition, rotor\/drum condition, and correct brake fluid. Routine checks and periodic bleeding will help maintain pedal feel and braking responsiveness over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePerformance depends on system condition, not just the master cylinder\u003c\/li\u003e\n  \u003cli\u003eInspect seals and lines regularly for leaks or degradation\u003c\/li\u003e\n  \u003cli\u003eBleed the brake circuit after installation and at routine intervals\u003c\/li\u003e\n  \u003cli\u003eUse manufacturer-recommended brake fluid for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePackage contents: one brand-new AUTOKAY hydraulic brake master cylinder with integrated reservoir, ready to fit and plumb into compatible mid-size go-karts. Note that international listings may differ in labeling or instructions.\u003c\/p\u003e\n\n\u003cp\u003eWho is this for: This master cylinder is aimed at kart owners, mechanics, and small repair shops maintaining or restoring mid-size recreational and racing karts such as Hammerhead 80T and TrailMaster Mid. It's a suitable replacement for enthusiasts who need a single-port rear brake master assembly with common mounting dimensions, and for anyone seeking a straightforward, ready-to-install hydraulic component for mid-frame go-karts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this master cylinder compatible with both Hammerhead 80T and TrailMaster Mid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It's specified to fit Hammerhead 80T and TrailMaster Mid models and many mid-size American Sportworks-style karts; verify mounting spacing before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include the reservoir and necessary fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The unit ships with the reservoir assembly installed; brake lines and fittings are not included, so plan to reuse or purchase those separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593264267449,"sku":"B012MXBMDQ","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-master-cylinder-front-view.jpg?v=1790573794"},{"product_id":"autokay-side-marker-lamp-for-2016-2021-honda-civic-smoked-pair-with-white-leds-ip68-waterproof-direct-fit","title":"AUTOKAY Side Marker Lamp for 2016–2021 Honda Civic — Smoked Pair with White LEDs, IP68 Waterproof Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY Side Marker Lamp Turn Signal Light is a direct-fit smoked front bumper LED side marker that replaces factory units on 2016–2021 Honda Civic models and includes long-lasting white LED bulbs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese smoked side marker lights from AUTOKAY are designed as a simple plug-and-play upgrade for Honda Civic sedans, hatchbacks, and coupes from model years 2016 through 2021. Each set ships as a pair with two white LED bulbs preincluded and features an IP68-rated ultrasonic seal to resist water and debris. The housing and lens match the bumper contours to maintain a factory look while improving visibility and durability.\u003c\/p\u003e\n\n\u003ch3\u003eHow easy is installation and will it alter my Civic's bumper?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is intended to be straightforward: these AUTOKAY markers are direct replacements that fit the existing mounting points, so no cutting or drilling is required. Most installers can complete the swap with basic hand tools and a few minutes per side. The wiring connects to the existing harness for turn-signal and marker functionality.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement fit for 2016–2021 Civic models\u003c\/li\u003e\n  \u003cli\u003eNo cutting, drilling, or bumper modification needed\u003c\/li\u003e\n  \u003cli\u003eUses factory mounting points and existing wiring harness\u003c\/li\u003e\n  \u003cli\u003eQuick swap—typically under 30 minutes per side\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and weather protection do these side markers provide?\u003c\/h3\u003e\n\n\u003cp\u003eAUTOKAY side markers are ultrasonically sealed and rated IP68, giving strong protection against dust and water intrusion. This level of sealing helps the lights withstand road spray, rain, and occasional immersion, which is important for front bumper locations. The included LED bulbs are described as ultra-bright and long-lasting compared with halogen alternatives.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproof rating for reliable weather resistance\u003c\/li\u003e\n  \u003cli\u003eUltrasonic sealing reduces risk of fogging and moisture entry\u003c\/li\u003e\n  \u003cli\u003eDurable materials designed for road exposure\u003c\/li\u003e\n  \u003cli\u003eLED bulbs for longer service life than standard bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these smoked markers affect visibility and styling?\u003c\/h3\u003e\n\n\u003cp\u003eThe smoked lens delivers a darker, more subtle appearance while the included white LED bulbs maintain bright marker and turn-signal output. This combination provides a cleaner, sportier look without sacrificing functional illumination. Because the lights are shaped to match the bumper, they preserve the car’s original lines while offering a visual upgrade.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSmoked finish for a sleek, low-profile aesthetic\u003c\/li\u003e\n  \u003cli\u003eWhite LEDs sustain clear marker\/turn-signal visibility\u003c\/li\u003e\n  \u003cli\u003eFactory-matching contours keep stock appearance\u003c\/li\u003e\n  \u003cli\u003eBalances style with practical road lighting requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and which Civic models are compatible?\u003c\/h3\u003e\n\n\u003cp\u003eThe package includes a pair of smoked front bumper LED side marker lights and two white LED bulbs, ready for installation. These markers are specified to fit Honda Civic Sedan, Hatchback, and Coupe models produced between 2016 and 2021. Verify your car’s model year and bumper configuration before ordering to ensure proper fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePair of smoked front bumper side marker lights\u003c\/li\u003e\n  \u003cli\u003eTwo white LED bulbs included for immediate use\u003c\/li\u003e\n  \u003cli\u003eCompatibility: Honda Civic 2016–2021 (sedan, hatchback, coupe)\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play components—no additional hardware required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOKAY Side Marker Lamp Turn Signal Light set is suited to Honda Civic owners (2016–2021) looking for a direct-fit styling upgrade that keeps factory function. It’s a good choice for DIY installers, enthusiasts wanting a smoked look without permanent bumper alterations, and drivers who want an IP68-protected, longer-lasting LED solution for their front markers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my 2018 Honda Civic Hatchback?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are designed as direct replacements for Honda Civic sedan, hatchback, and coupe models from 2016 through 2021.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra parts to install these side markers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No additional parts required—these are plug-and-play replacements and include two white LED bulbs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593267740857,"sku":"B0BLNKCRCD","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-packaging-side-marker-lights.jpg?v=1790573862"},{"product_id":"autokay-carburetor-for-kohler-k241-k301-10hp-12hp-direct-replacement-4705314-with-gasket","title":"AUTOKAY Carburetor for Kohler K241 K301 10HP–12HP - Direct Replacement 4705314 with Gasket","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 4705314 is a direct-replacement carburetor kit engineered to fit Kohler K-Series K241 and K301 10HP–12HP cast-iron engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mower, garden tractor, or small engine is running rough, hard to start, or using excess fuel, an aged or damaged carburetor is often the culprit. This AUTOKAY carburetor kit comes with the exact mounting interfaces and gasket needed to replace part numbers like 4705314, 4785303, and compatible Walbro WHG 52 units, restoring proper fuel-air metering for K-Series Kohler engines and a range of M10\/M12 10–12HP cast-iron powerplants.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my Kohler K241 or K301 engine?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the AUTOKAY 4705314 is designed to match the mounting pattern, throttle linkage, and fuel inlet locations used by many Kohler #26 K-Series K241 and K301 10HP–12HP cast-iron engines. It also lists numerous OEM and aftermarket cross-reference numbers to help confirm compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for OEM part numbers like 4705314 and 4785323.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Kohler K-Series #26 engines K241 and K301 (10HP and 12HP).\u003c\/li\u003e\n  \u003cli\u003eWorks with M10\/M12 engine models and common lawn mower\/tractor applications.\u003c\/li\u003e\n  \u003cli\u003eCross-references Walbro WHG 52 carburetor fitment for easier identification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation for a home mechanic?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is relatively straightforward for anyone comfortable with small-engine maintenance. The kit includes one carburetor and a gasket; you’ll typically remove the old unit, transfer the throttle linkage and choke components if required, and bolt the new carburetor in place using the supplied gasket for a sealed fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools and safety precautions are all that’s needed.\u003c\/li\u003e\n  \u003cli\u003eTransfer small parts (fasteners, linkages) from the original carburetor as necessary.\u003c\/li\u003e\n  \u003cli\u003eCheck for fuel line condition and replace old hoses to avoid leaks.\u003c\/li\u003e\n  \u003cli\u003eAdjust idle and mixture per engine manual after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and reliability improvements can I expect?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing a worn or clogged carburetor often restores smooth idling, quicker starting, better throttle response, and more consistent fuel consumption. Because this AUTOKAY unit mirrors OEM dimensions and uses established Walbro-compatible geometry, it helps bring the engine back to intended performance when installed and tuned correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReduced stalling and smoother idle when properly adjusted.\u003c\/li\u003e\n  \u003cli\u003eImproved throttle response and easier cold starts.\u003c\/li\u003e\n  \u003cli\u003eMore consistent fuel delivery across load ranges.\u003c\/li\u003e\n  \u003cli\u003eReplacement gasket included to prevent vacuum or fuel leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts and models are cross-referenced with this kit?\u003c\/h3\u003e\n\n\u003cp\u003eThis carburetor lists an extensive set of replacement and cross-reference numbers to assist identification and compatibility checking. It covers multiple Kohler part numbers and several aftermarket designations used by small-engine service parts suppliers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplaces numbers including 4705314, 4705313, 4785303, 4785323, and variants.\u003c\/li\u003e\n  \u003cli\u003eAlso referenced as 47-053-13, 47-853-22, 47-853-23, and related codes.\u003c\/li\u003e\n  \u003cli\u003eFitment notes include Kohler cast iron engines and M10\/M12 model families.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Walbro WHG 52 style carburetors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY carburetor kit is aimed at DIY lawn mower and small-engine owners, landscape professionals, and repair shops that service Kohler K-Series 10HP–12HP cast-iron engines or M10\/M12 family engines. If you need a reliable replacement for worn or damaged carburetors and want a kit that matches common OEM and aftermarket references, this product provides the gasket and form-factor to simplify swap-outs and get equipment back to dependable operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace Kohler part number 4705314?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The AUTOKAY 4705314 kit is intended as a direct replacement for Kohler part 4705314 and several cross-referenced numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is a gasket included with the carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes one carburetor and one gasket to ensure a sealed installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593324724409,"sku":"B073J7KMG1","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-carburetor-front-view_91c23f57-57e0-4402-a636-223eb014c538.jpg?v=1790574563"},{"product_id":"autokay-honda-cr-v-front-seat-armrest-covers-black-pair-microfiber-leather-water-resistant","title":"AUTOKAY Honda CR-V Front Seat Armrest Covers — Black Pair, Microfiber Leather, Water-Resistant","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY’s black microfiber leather front seat armrest cover replaces worn side armrest pads on Honda CR‑V models from 2007 to 2009 for a refreshed, water-resistant elbow rest.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your CR‑V’s front armrest shows cracks, stains or sticky wear, this pair of side armrest covers offers an affordable way to restore comfort and appearance without replacing the whole assembly. Built from elastic microfiber leather, these aftermarket caps slip over the original handrail to provide a softer elbow surface that resists dirt and moisture and wipes clean with a damp cloth.\u003c\/p\u003e\n\n\u003ch3\u003eWill this armrest cover fit my Honda CR‑V?\u003c\/h3\u003e\n\u003cp\u003eThese covers are cut to fit the side front armrest design found on Honda CR‑V 2007, 2008 and 2009 models. They are sold as a set of two side covers (left and right) and attach directly onto the original handrail after the old cover is removed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility: Honda CR‑V years 2007–2009 (front side armrests)\u003c\/li\u003e\n  \u003cli\u003eSold as: pair of side armrest covers only — armrest hardware not included\u003c\/li\u003e\n  \u003cli\u003eInstallation: remove original cover, slip new cover onto handrail\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy to maintain is the material?\u003c\/h3\u003e\n\u003cp\u003eThe replacement covers use high-quality microfiber leather rather than genuine leather, offering strong wear resistance and longer service life under everyday use. The surface is designed to be waterproof and dirt-resistant, so routine spills and smudges can be cleaned quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: elastic microfiber leather for a soft, supportive feel\u003c\/li\u003e\n  \u003cli\u003eCare: wipe with a damp cloth for fast cleaning\u003c\/li\u003e\n  \u003cli\u003ePerformance: water-impermeable and abrasion-resistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation for a DIYer?\u003c\/h3\u003e\n\u003cp\u003eInstallation is simple: remove the existing side armrest cover and place the AUTOKAY cover onto the original handrail. No special tools or glues are required, making it a quick upgrade you can do in minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteps: remove old cover → align new cover → set on original handrail\u003c\/li\u003e\n  \u003cli\u003eTime: typically a few minutes per side for experienced users\u003c\/li\u003e\n  \u003cli\u003eTools: generally none required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comfort or aesthetic benefits can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe elastic microfiber leather gives a softer, more comfortable elbow surface compared with worn factory material, and the black finish restores a clean, uniform look to the front seating area. It’s a small detail that improves daily comfort and the interior’s overall appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComfort: padded, soft elbow support\u003c\/li\u003e\n  \u003cli\u003eAppearance: sleek black finish to match interior styling\u003c\/li\u003e\n  \u003cli\u003eLongevity: built to resist scuffs and staining\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers and owners of Honda CR‑V model years 2007 through 2009 who want a fast, low-cost cosmetic and comfort upgrade for their front armrests. It’s ideal for people restoring a used vehicle, replacing a cracked factory pad, or simply improving daily driving comfort without replacing the entire armrest assembly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these covers compatible with other Honda models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are specifically shaped for Honda CR‑V 2007–2009 front side armrests; compatibility with other models is not guaranteed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need any tools to install the covers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required—remove the old cover and slip the AUTOKAY cover onto the original handrail.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593364177081,"sku":"B0BLSGSJPM","price":71.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-armrest-cover-front-view.jpg?v=1790574979"},{"product_id":"autokay-hvac-inlet-heater-hose-20765678-direct-fit-for-buick-enclave-2008-2017-oem-style","title":"AUTOKAY HVAC Inlet Heater Hose 20765678 — Direct-Fit for Buick Enclave 2008–2017, OEM-Style","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 20765678 is a direct-fit HVAC inlet heater hose engineered to replace the factory line in select Buick, GMC, Chevrolet and Saturn SUVs from 2007–2017.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement inlet heater hose restores the coolant flow path that routes warm engine coolant into the vehicle’s heater core. Designed to match the original equipment routing and connection points, the AUTOKAY hose is offered as a cost-effective service part when the stock hose shows age-related cracking, leaks, or soft spots. It ships ready to install and includes the part number 20765678 so you can confirm compatibility with your vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will accept this AUTOKAY inlet heater hose?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY 20765678 hose is made to fit a range of GM midsize and large crossover SUVs. It covers multiple model years across several nameplates, matching the original part’s length, bends, and end fittings for direct replacement without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuick Enclave: 2008–2017\u003c\/li\u003e\n  \u003cli\u003eGMC Acadia: 2007–2016; Acadia Limited: 2017\u003c\/li\u003e\n  \u003cli\u003eChevrolet Traverse: 2009–2017\u003c\/li\u003e\n  \u003cli\u003eSaturn Outlook: 2007–2010\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this hose compare to the factory component?\u003c\/h3\u003e\n\u003cp\u003eBuilt to the same basic dimensions and connection style as the original part, the AUTOKAY hose provides a like-for-like replacement for worn or damaged factory hoses. Material selection and reinforcement aim to resist common failure modes such as cracking from heat cycles and softening from coolant exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit geometry for OEM routing and clamps\u003c\/li\u003e\n  \u003cli\u003eDurable rubber compound with reinforcement layers\u003c\/li\u003e\n  \u003cli\u003eMarked with the replacement part number 20765678 for verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing this inlet heater hose?\u003c\/h3\u003e\n\u003cp\u003eConfirm year, make and model compatibility and compare the hose shape to the old unit. Also inspect adjacent components—clamps, heater core connections, and nearby wiring—to ensure the replacement installs cleanly and prevents future leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify part number 20765678 against the old hose\u003c\/li\u003e\n  \u003cli\u003eReplace worn clamps or corroded fittings during installation\u003c\/li\u003e\n  \u003cli\u003eFlush or top up coolant per factory recommendations after fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long should I expect this replacement to last?\u003c\/h3\u003e\n\u003cp\u003eLifespan depends on operating conditions, maintenance, and coolant condition; a properly installed inlet heater hose typically lasts several years under normal driving. Regular cooling-system checks and using manufacturer-specified coolant will help extend service life and reduce premature deterioration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eService life varies with heat cycles and coolant quality\u003c\/li\u003e\n  \u003cli\u003eInspect hoses yearly for softness, swelling or cracks\u003c\/li\u003e\n  \u003cli\u003eReplace immediately if any coolant seepage or damage is observed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOKAY 20765678 inlet heater hose is aimed at DIY mechanics, independent repair shops, and fleet technicians who need a reliable, direct replacement for HVAC heater lines on compatible GM SUVs. If your Buick Enclave, GMC Acadia\/Acadia Limited, Chevrolet Traverse, or Saturn Outlook shows signs of a failing heater hose, this part provides a straightforward swap to restore heater-core coolant flow and prevent interior heater issues or engine bay leaks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplace Part Number: 20765678\u003c\/li\u003e\n  \u003cli\u003eEngine Heater Hose Fits for Saturn Outlook 2007-2010\u003c\/li\u003e\n  \u003cli\u003eEngine Heater Hose Fits for Buick Enclave 2008-2017\u003c\/li\u003e\n  \u003cli\u003eEngine Heater Hose Fits for Chevrolet Traverse 2009-2017\u003c\/li\u003e\n  \u003cli\u003eEngine Heater Hose Fits for GMC Acadia 2007-2016; Acadia Limited 2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this hose fit my 2011 GMC Acadia?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. AUTOKAY 20765678 lists GMC Acadia coverage through 2016, including 2011 models as a direct-fit replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need new clamps when I replace the inlet heater hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It's recommended to replace worn clamps; fresh clamps ensure a leak-free seal and simplify installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593364209849,"sku":"B0C33WPBKX","price":62.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-20765678-front-view.jpg?v=1790574978"},{"product_id":"autokay-carburetor-for-honda-crf50-xr50-z50-z50r-stock-size-32mm-mount-28mm-intake-for-49-50cc-minibikes","title":"AUTOKAY Carburetor for Honda CRF50 XR50 Z50 Z50R - Stock-Size 32mm Mount, 28mm Intake for 49–50cc Minibikes","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY's replacement carburetor is a direct-fit, stock-size unit designed to restore reliable fueling on 49–50cc Honda-style minibikes and many compatible Chinese pit bikes and go-karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis precision-cast carburetor is built to the common OEM footprint (32mm on-center mounting) with a 28mm intake bore where the airbox attaches, making it a straightforward swap for models like Honda Z50, Z50R, XR50, CRF50 and numerous 50cc small-engine machines that use PZ-10 style carbs. It provides the correct throat size and mounting spacing for easy installation and consistent throttle response on 49cc engines.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my Honda Z50, XR50 or CRF50?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the AUTOKAY unit was manufactured to the commonly used stock dimensions for these minibike models. Confirm your bike uses a 32mm on-center mount and a 28mm airbox\/intake bore to ensure a direct fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMounting holes: 1 1\/4\" (32mm) center-to-center.\u003c\/li\u003e\n  \u003cli\u003eIntake side diameter: 28mm where the airbox connects.\u003c\/li\u003e\n  \u003cli\u003eCompatible with OEM-style PZ-10 carb setups on 49–50cc engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this carburetor improve engine performance or reliability?\u003c\/h3\u003e\n\n\u003cp\u003eIt replaces worn or clogged factory carbs with a fresh unit that restores proper fuel-air metering and smoother throttle response. While not a performance tuner, it returns predictable idle, steady acceleration and easier starting for small-displacement engines.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNew internal passages reduce vapor lock and blockage risks.\u003c\/li\u003e\n  \u003cli\u003eCorrect bore size maintains factory air\/fuel balance for stock engines.\u003c\/li\u003e\n  \u003cli\u003eHelps avoid surging and inconsistent idling caused by degraded carbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and engines are compatible with this carburetor?\u003c\/h3\u003e\n\n\u003cp\u003eThe carb is intended for 49–50cc dirt bikes, minibikes, and go-karts that use the PZ-10 or similar OEM-style carburetor footprint. It works with many Japanese and Chinese small engines that follow the same dimensions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHonda Z50, Z50R, Z50A, XR50 and CRF50 models.\u003c\/li\u003e\n  \u003cli\u003eVarious Chinese 50cc pit bikes and minibikes using PZ-10 style carbs.\u003c\/li\u003e\n  \u003cli\u003eSmall go-karts and engines that mount to 32mm centers with a 28mm intake.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing this carburetor?\u003c\/h3\u003e\n\n\u003cp\u003eVerify mounting spacing, intake diameter and throttle\/cable linkage compatibility to ensure a smooth swap. Also inspect the intake manifold and airbox for damage, and replace any worn gaskets or boots for a reliable seal.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMeasure center-to-center mounting holes (32mm required).\u003c\/li\u003e\n  \u003cli\u003eConfirm airbox\/boot fits a 28mm intake flange.\u003c\/li\u003e\n  \u003cli\u003eCompare throttle cable and choke connections to your existing carb.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders, mechanics and hobbyists repairing or maintaining 49–50cc minibikes, pit bikes and small go-karts who need a direct-replacement carburetor built to stock dimensions. If your bike uses the common 32mm mounting and 28mm intake standard, this AUTOKAY carb provides an affordable, practical option to restore reliable fueling without modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor fit a 50cc Honda Monkey or Z50?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your bike uses a 32mm center-to-center mount and a 28mm intake flange, it will fit Honda Z50\/Monkey-style 50cc models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor ready to install or does it need jets tuned?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It installs as a stock-size replacement; jetting may be adjusted for altitude, aftermarket exhausts, or intake changes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593525657785,"sku":"B016W6CSX2","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-carburetor-front-view_59ffc30f-1ab2-4069-900e-cfc5493488ca.jpg?v=1790576456"},{"product_id":"autokay-tpms-rubber-snap-in-valve-stem-kit-20-pack-17-20008-preassembled-cores-screws","title":"AUTOKAY TPMS Rubber Snap-In Valve Stem Kit 20-Pack — 17-20008, Preassembled Cores \u0026 Screws","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 20 PCS TPMS 17-20008 is a rubber snap-in valve stem kit designed to replace worn TPMS valve stems and restore an airtight, vehicle-compatible connection between tire pressure sensors and the wheel.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese valve stems are a direct, economical way to refresh factory-style TPMS hardware on many domestic and import vehicles. Each stem comes preassembled with the core, cap and mounting screw so you can install quickly; the kit contains 20 pieces to service a whole fleet, multiple vehicles, or keep spares on hand. The stems are constructed from durable rubber with a pure-copper core to resist corrosion and preserve signal continuity where sensors attach.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicle makes and part numbers match this AUTOKAY kit?\u003c\/h3\u003e\n\u003cp\u003eThis set lists several part numbers and broad manufacturer compatibility to help you check fitment before purchase. It’s intended for many Ford, Chevrolet, Dodge, Chrysler, Buick, Ram, Cadillac, Pontiac, GMC, Jeep, Saturn, Subaru and Lincoln models, but you should confirm your OE reference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded part references: 17-20008, 20008, 20018, VS-950, VS950, 15263240.\u003c\/li\u003e\n  \u003cli\u003eCompatible with many domestic GM, Ford and FCA platforms; verify with your vehicle’s OE part number.\u003c\/li\u003e\n  \u003cli\u003eWorks with snap-in TPMS sensor housings (sensor not included).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these valve stems constructed and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThe stems combine a flexible rubber body with a pure-copper core to balance sealing performance and electrical reliability. Rubber ensures a tight tire bead seal and resists road debris, while the copper core reduces oxidation where the sensor mounting screw contacts the stem.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRubber body for airtight sealing and vibration dampening.\u003c\/li\u003e\n  \u003cli\u003ePure-copper internal component to reduce corrosion at the sensor interface.\u003c\/li\u003e\n  \u003cli\u003ePreinstalled valve core and included cap for immediate installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what tools or parts will I still need?\u003c\/h3\u003e\n\u003cp\u003eThe package contains 20 snap-in TPMS valve stems, each with the valve core installed, a valve cap, and the mounting screw used to fasten a separate TPMS sensor. You will still need the compatible TPMS sensor bodies if you’re replacing the entire sensor assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20 rubber snap-in valve stems ready for use.\u003c\/li\u003e\n  \u003cli\u003eEach stem includes installed core, cap and mounting screw; sensors are not included.\u003c\/li\u003e\n  \u003cli\u003eInstallation typically requires standard tire-service tools and a torque driver for sensor screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these stems for tire repairs, long-term service, or fleet maintenance?\u003c\/h3\u003e\n\u003cp\u003eThis 20-piece kit is practical for workshops, DIYers with multiple vehicles, or fleet operators who require bulk replacement parts. Because the stems are snap-in style, they simplify routine TPMS maintenance and lower the cost of sensor repairs compared with full OEM assemblies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBulk packaging suits shops and fleet upkeep.\u003c\/li\u003e\n  \u003cli\u003eSnap-in design speeds replacement during tire service.\u003c\/li\u003e\n  \u003cli\u003eKeep extra stems on hand to avoid downtime during sensor swaps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOKAY 20 PCS TPMS 17-20008 kit is ideal for independent tire shops, vehicle service centers, fleet managers, and hands-on vehicle owners who need a cost-effective supply of snap-in valve stems compatible with many Ford, GM and FCA platforms. If you plan to reuse existing TPMS sensors, or you maintain several cars and want spare valve stems for quick swapouts, this kit provides the parts and quantity to keep wheels sealed and sensors mounted correctly. Always match your vehicle’s OE part number and sensor type before installing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these stems include the TPMS sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit includes snap-in valve stems with core, cap, and mounting screw; the TPMS sensor body must be purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these valve stems compatible with my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Ford, GM, Chrysler and related models. Verify against listed part numbers (17-20008, VS-950, 15263240) and your OE reference before buying.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593740812473,"sku":"B07FKN27DH","price":58.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-packaging-valve-stems.jpg?v=1790578041"},{"product_id":"autokay-ignition-lock-cylinder-replacement-with-2-cut-keys-for-ford-lincoln-mazda-direct-fit-ready-to-install","title":"AUTOKAY Ignition Lock Cylinder Replacement with 2 Cut Keys for Ford Lincoln Mazda — Direct-Fit, Ready-to-Install","description":"\u003cstrong\u003eAUTOKAY Ignition Lock Cylinder with two cut keys is a direct-replacement ignition cylinder designed to match original equipment fit and function for many Ford, Lincoln and Mazda vehicles.\u003c\/strong\u003e\n\nReplacing a worn or damaged ignition cylinder can restore reliable starting and secure key operation. This AUTOKAY unit is manufactured to align with the original part specifications listed by common OEM reference numbers, and it ships complete with two keys so you can swap the cylinder and get back on the road without waiting for a locksmith. The build is intended to integrate with the existing steering column housing and keyway from the listed model years.\n\n\u003ch3\u003eWhat exactly does this ignition lock cylinder replace?\u003c\/h3\u003e\n\nThis replacement covers a set of OEM and aftermarket reference numbers so you can cross-check fitment against the part you removed. It is intended as a like-for-like mechanical cylinder that accepts the included keys and connects to the factory ignition switch assembly.\n\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers such as 1F2009012, 1L3Z11582A and F69Z11582AA\u003c\/li\u003e\n  \u003cli\u003eMatches the original keyway and cylinder dimensions for direct installation\u003c\/li\u003e\n  \u003cli\u003eIncludes two identical cut keys for immediate use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles will this AUTOKAY cylinder fit?\u003c\/h3\u003e\n\nThe cylinder is compatible with a wide range of Ford, Lincoln and Mazda models across late 1990s and early 2000s production years. Use the listed model and year ranges to verify compatibility with your steering column and ignition assembly before ordering.\n\n\u003cul\u003e\n  \u003cli\u003eFord: Ranger (1996–2011), F‑150 (1997–2003), Mustang (1997–2004), Explorer (2003), Econoline series (1999–2006) and others\u003c\/li\u003e\n  \u003cli\u003eLincoln: Continental (1996–2002), Navigator (1998–2002), Blackwood (2002)\u003c\/li\u003e\n  \u003cli\u003eMazda: B‑series trucks including B2300, B3000 and B4000 across late 90s and 2000s\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what comes in the package?\u003c\/h3\u003e\n\nInstallation is generally straightforward for someone familiar with steering column work and basic hand tools; however, vehicle designs vary so following a vehicle‑specific service manual is recommended. The package contains the ignition lock cylinder and two cut keys, which eliminates the need for key cutting after purchase.\n\n\u003cul\u003e\n  \u003cli\u003ePackage includes 1 ignition lock cylinder and 2 ready-to-use keys\u003c\/li\u003e\n  \u003cli\u003eNo additional tumblers or rekeying tools included — plug-and-play when matched\u003c\/li\u003e\n  \u003cli\u003eTypical install requires removal of steering column covers and disconnection of the battery for safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the new cylinder work with my original keys or immobilizer?\u003c\/h3\u003e\n\nThis replacement is a mechanical cylinder that comes with two new physical keys cut to operate the new lock. It does not alter electronic immobilizer systems; if your vehicle uses a transponder or key chip for anti-theft, you may need to use existing factory programming or have the new keys programmed by a dealer or locksmith.\n\n\u003cul\u003e\n  \u003cli\u003eIncludes mechanically cut keys that match the supplied cylinder\u003c\/li\u003e\n  \u003cli\u003eDoes not include electronic transponder programming — check your vehicle's anti-theft requirements\u003c\/li\u003e\n  \u003cli\u003eIf the original key contains a chip, verify whether reprogramming is necessary before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThis AUTOKAY ignition lock cylinder is suited for DIY mechanics, independent repair shops and vehicle owners who need a precise mechanical replacement for a worn or broken ignition cylinder. It’s particularly useful when you want a direct-fit part that follows OEM reference numbers and arrives ready with two keys. Confirm model-year compatibility and your vehicle’s immobilizer needs before purchase to ensure seamless installation and operation.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this cylinder include keys?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package ships with one ignition lock cylinder and two cut keys ready to use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need to reprogram my vehicle’s immobilizer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your vehicle uses a transponder key, electronic reprogramming may be required; this is a mechanical cylinder only.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593786785977,"sku":"B0CBS5KSYJ","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-view-ignition-cylinder.jpg?v=1790578759"},{"product_id":"autokay-rear-frame-leaf-spring-bump-stops-for-silverado-sierra-pair-oe-fit-15712438-rubber-shock-cushion","title":"AUTOKAY Rear Frame Leaf Spring Bump Stops for Silverado \u0026 Sierra (Pair) – OE Fit 15712438, Rubber Shock Cushion","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 523-049 \/ 15712438 rear frame leaf spring bump stop is a pair of rubber axle bumpers designed to replace worn rear frame bump stops on compatible Chevrolet Silverado and GMC Sierra pickups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement pair from AUTOKAY restores the original stopping point for the rear suspension, helping reduce metal-to-metal contact and limiting harsh impacts when the axle reaches full travel. Made to match OE fitment numbers 15712438 and 523-049, these bump stops are molded rubber components intended for specific model years of Silverado 1500, Silverado 1500 Classic, Silverado 1500 HD, and corresponding GMC Sierra variants. They come as a pair and are intended to be mounted on the rear axle frame where the leaf spring meets the frame, providing a simple, economical refresh for tired or missing bump stops.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these AUTOKAY bump stops fit?\u003c\/h3\u003e\n\u003cp\u003eThese bump stops are manufactured to fit several Chevrolet and GMC pickup model years that share the same frame bump stop design. They cover standard and HD variants across 1999–2007 model years, including the 1500 and HD designations and Classic editions where applicable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet Silverado 1500: 1999–2006 and 2007 Classic\u003c\/li\u003e\n  \u003cli\u003eChevrolet Silverado 1500 HD: 2001–2003 and 2005–2006; HD Classic 2007\u003c\/li\u003e\n  \u003cli\u003eGMC Sierra 1500: 1999–2006 and 2007 Classic\u003c\/li\u003e\n  \u003cli\u003eGMC Sierra 1500 HD: 2001–2003 and 2005–2006; HD Classic 2007\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing the rear frame bump stop help my truck?\u003c\/h3\u003e\n\u003cp\u003eWorn or missing bump stops allow the axle to strike the frame or leaf spring directly, causing noise, impact stress, and potential frame or component damage. Installing a fresh pair provides a rubber cushion at full suspension compression, absorbing shock and protecting metal parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces harsh bottoming-out impacts and noise\u003c\/li\u003e\n  \u003cli\u003eProtects leaf springs, axle mounts, and frame edges\u003c\/li\u003e\n  \u003cli\u003eRestores correct suspension travel limits as intended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the package include and how straightforward is installation?\u003c\/h3\u003e\n\u003cp\u003eThe product ships as a matched pair of rear axle rubber bumpers so both sides of the rear frame receive identical components. Installation is typically a straightforward replacement: remove the old bump stops from their mounting locations and press or bolt the new AUTOKAY units into place, depending on your vehicle's fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 1 pair of rear axle rubber bumpers (left and right)\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for part numbers 15712438 and 523-049\u003c\/li\u003e\n  \u003cli\u003eFits OE mounting points on compatible Silverado and Sierra models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bump stops durable and what material are they made of?\u003c\/h3\u003e\n\u003cp\u003eAUTOKAY bump stops are molded from durable rubber formulated to resist compression and ambient wear encountered under the vehicle. While rubber will age over many years, these replacements are chosen to match factory specifications for resilience and shape.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMolded rubber construction for impact absorption\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist typical road and load-related wear\u003c\/li\u003e\n  \u003cli\u003eMade to replicate OEM shape and mounting for consistent fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY rear frame leaf spring bump stop pair is intended for owners and technicians working on late-1990s through mid-2000s Chevrolet Silverado 1500\/Silverado 1500 HD and GMC Sierra 1500\/Sierra 1500 HD trucks who need a direct-fit, cost-effective replacement for worn or missing rear frame bump stops. It’s suitable for routine suspension maintenance, restoration projects, or anyone wanting to prevent hard bottoming impacts without modifying suspension geometry.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these bump stops replace part number 15712438?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. AUTOKAY 523-049 is a direct replacement compatible with part number 15712438.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are both bump stops included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains one pair of rear axle rubber bump stops for both sides.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593797927097,"sku":"B0B55S9FXR","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-rear-frame-bump-stop-front-view.jpg?v=1790579005"},{"product_id":"autokay-carburetor-replacement-for-14-18-hp-intek-toro-engines-fits-591731-594593-complete-install-kit","title":"AUTOKAY Carburetor Replacement for 14–18 HP Intek \u0026 Toro Engines — Fits 591731\/594593, Complete Install Kit","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 594593 \/ 591731 is a direct-fit carburetor replacement kit designed to restore fuel delivery and throttle response on compatible 14–18 HP Intek and Toro riding-mower engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your compact tractor or riding mower has a leaking, clogged, or damaged carburetor, swapping in this AUTOKAY assembly gives you a complete, ready-to-install solution. The kit replaces several OEM part numbers, fits a broad range of Nikki and Intek engine families, and includes the small parts you need to finish the job without multiple trips to the parts store.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my engine and mower model?\u003c\/h3\u003e\n\u003cp\u003eCheck the OEM numbers and engine codes first: the AUTOKAY 594593 \/ 591731 matches many commonly used part numbers and engine series. It lists compatibility with Nikki 21B000 and a long list of Intek 14–18 HP engine variants, plus multiple Toro model references for riding lawn mowers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers: 591731, 594593, 796109, 590400 and many more.\u003c\/li\u003e\n  \u003cli\u003eFits Nikki 21B000 and 21B807 engines.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Intek series: 14 HP, 17.5 HP, 18 HP and numerous 28\/31 engine codes.\u003c\/li\u003e\n  \u003cli\u003eReferenced Toro models: 71427, 74325, 74327, 74419, 74571 and related riding mower part numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what do I need to install it?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with the carburetor plus essential installation parts so you can replace the unit right away. Basic hand tools and a few minutes of mechanical experience are all that’s required for the swap; follow safe fuel-handling practices and engine shutoff procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1x carburetor, 1x gasket, 2x hose clamps, 1x fuel line, 1x fuel filter, 1x shut-off valve, 1x spark plug.\u003c\/li\u003e\n  \u003cli\u003eTools typically needed: wrench set, screwdriver, pliers, shop rags, fuel container for drainage.\u003c\/li\u003e\n  \u003cli\u003eInstallation notes: match mounting holes and linkage, ensure fuel line seating, and tighten clamps to avoid leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement compare to the original part?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY unit is manufactured to meet the fit and function of the listed OEM part numbers and restore original fuel flow characteristics. While aftermarket parts can vary, this kit focuses on interchangeability and convenience by including a gasket, filter and fuel hardware for a complete replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForm-fit design mirrors OEM mounting and inlet\/outlet positions.\u003c\/li\u003e\n  \u003cli\u003eIncludes consumables so you avoid sourcing small components separately.\u003c\/li\u003e\n  \u003cli\u003eIntended as a direct replacement for many 591731\/593514\/594593 family parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAny maintenance tips after installing the carburetor?\u003c\/h3\u003e\n\u003cp\u003eAfter installation, run the engine and check for leaks, stable idle, and correct throttle response. Periodic maintenance and fresh fuel will extend the life of the carburetor and help prevent common problems like clogged jets or varnished passages.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect hose clamps and shut-off valve for leaks after first start-up.\u003c\/li\u003e\n  \u003cli\u003eReplace the included fuel filter annually or if fuel flow is restricted.\u003c\/li\u003e\n  \u003cli\u003eUse clean, stabilized fuel and run the mower periodically to keep passages clear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY replacement carburetor kit is aimed at DIY lawn equipment owners, small-engine mechanics, and service shops that need a cost-effective, ready-to-install replacement for 14–18 HP Intek engines and many Toro riding mower models. If you have a matching OEM part number or the listed engine codes, this kit supplies the carburetor plus the small parts required to complete a fast, reliable swap.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor replace 591731 and 594593?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The AUTOKAY kit is a direct replacement for 591731 and 594593 and many related OEM numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is a fuel filter included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a fuel filter, fuel line, clamps, gasket, shut-off valve and a spark plug.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593832792249,"sku":"B01M22SZ0B","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-carburetor-front-view_941de624-67c0-4884-8ffe-38f05fc230b1.jpg?v=1790579574"},{"product_id":"autokay-carbon-fiber-gear-shift-knob-for-lexus-is250-is300-is350-black-carbon-finish-metal-base","title":"AUTOKAY Carbon Fiber Gear Shift Knob for Lexus IS250 IS300 IS350 — Black Carbon Finish, Metal Base","description":"\u003cp\u003e\u003cstrong\u003eAutokay's carbon-fiber gear shift knob replaces the factory knob with a lightweight, textured, OEM‑style shifter designed for compatible Lexus and Toyota automatic transmissions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement shift knob combines a carbon fiber finish with durable metal components to refresh the interior feel and appearance of compatible Lexus and Toyota vehicles. It’s engineered for automatic gear selector rods and offers a direct-swap fit on many common Lexus IS, GS, ES, LS, RX and Toyota model years listed in the compatibility table. Before ordering, check your shifter type and confirm there is no boot cover or manual-transmission rod that would prevent installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill this shift knob fit my Lexus IS250 or IS350?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY knob is compatible with most automatic-equipped Lexus IS250 (2006–2013), IS300 (2003–2005), and IS350 (2006–2013) models. It is not compatible with manual-transmission variants such as the IS250 6MT. Verify that your vehicle uses an exposed gear shifter rod without an integrated boot sleeve.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits automatic transmission IS250 (2006–2013), IS300 (2003–2005), IS350 (2006–2013).\u003c\/li\u003e\n  \u003cli\u003eDoes not fit manual-transmission shifters (e.g., IS250 6MT).\u003c\/li\u003e\n  \u003cli\u003eCannot install if a fixed boot cover or sleeve obstructs the shifter rod.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the AUTOKAY carbon fiber knob install and feel?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most vehicles with compatible automatic shifter rods: remove the factory knob, slide the AUTOKAY unit onto the rod, and secure per the supplied hardware or set screws. The carbon fiber outer finish gives a premium textured grip while metal internal parts ensure a secure connection and long-term durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple swap: remove stock knob, align, and fasten AUTOKAY knob onto the rod.\u003c\/li\u003e\n  \u003cli\u003eCarbon fiber-look exterior for improved grip and modern appearance.\u003c\/li\u003e\n  \u003cli\u003eMetal base and fastening hardware provide stability under daily use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich other Lexus, Toyota and related models are covered?\u003c\/h3\u003e\n\u003cp\u003eBeyond IS models, this knob fits a broad range of Lexus sedans, coupes and SUVs and many Toyota platforms listed by model year. Compatibility includes popular lines such as ES, GS, LS, RX, GX\/LC (Land Cruiser family), and several Toyota sedans, trucks and SUVs—check the exact model years before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLexus coverage: ES, GS, LS, GS, RX, HS, IS‑F and more across listed years.\u003c\/li\u003e\n  \u003cli\u003eToyota coverage: Camry, Corolla, RAV4, Highlander, Tundra, 4Runner and others.\u003c\/li\u003e\n  \u003cli\u003eSee compatibility notes: excludes manual transmissions and shifters with boot covers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to avoid fitment issues?\u003c\/h3\u003e\n\u003cp\u003eConfirm your vehicle’s transmission type (automatic vs manual) and inspect the shifter rod for any integrated boot, sleeve, or unique mounting that would block the replacement knob. If you’re unsure, compare your current knob’s removal method to the common cup-and-set-screw designs or consult a dealer\/mechanic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify automatic transmission—manual variants are incompatible.\u003c\/li\u003e\n  \u003cli\u003eEnsure no fixed boot cover or sleeve prevents installation.\u003c\/li\u003e\n  \u003cli\u003eCompare your stock knob removal method to common aftermarket replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want to upgrade their vehicle’s interior style and tactile feel without major modification. The AUTOKAY carbon fiber shift knob is aimed at Lexus and Toyota owners with compatible automatic shifters who prefer a sportier, premium-looking knob that installs quickly and improves grip. It’s ideal for enthusiasts refreshing an older interior or anyone seeking a lightweight, durable aftermarket replacement that blends performance-inspired design with everyday usability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit manual transmission Lexus models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The AUTOKAY knob is only for automatic shifters and will not fit manual-transmission rods like the IS250 6MT.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it install if my shifter has a boot cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Installation requires an exposed shifter rod; a fixed boot cover or sleeve will prevent proper fitment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593919430841,"sku":"B0C9DP6CMQ","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-carbon-fiber-shift-knob-front-view.jpg?v=1790580679"},{"product_id":"autokay-turbo-oil-return-pipe-tube-for-buick-chevy-1-4l-rubber-return-line-with-gasket-oem-55587854","title":"AUTOKAY Turbo Oil Return Pipe Tube for Buick\/Chevy 1.4L — Rubber Return Line with Gasket (OEM 55587854)","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY's turbo oil return pipe tube with gasket replaces OEM 55587854\/55569839 to restore reliable oil drainage from the turbo on 1.4L Chevy and Buick turbo engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement turbo oil return line is precision-made to match the fit and function of the original part for multiple Chevrolet and Buick 1.4L turbo applications. Built from a durable rubber compound with a matching gasket included, the tube resists heat cycling, vibration, and common failure modes such as cracking or leaking. It’s supplied as a direct-fit service item to simplify repairs and get your turbo oil circulation back to proper operation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this AUTOKAY turbo oil return tube fit?\u003c\/h3\u003e\n\u003cp\u003eThis pipe is designed specifically for GM 1.4L turbo models across several years. Verify your vehicle’s engine and part number before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2011–2019 Chevrolet Cruze 1.4L\u003c\/li\u003e\n  \u003cli\u003e2016 Chevrolet Cruze Limited 1.4L\u003c\/li\u003e\n  \u003cli\u003e2012–2019 Chevrolet Sonic 1.4L\u003c\/li\u003e\n  \u003cli\u003e2013–2019 Chevrolet Trax 1.4L and 2013–2019 Buick Encore 1.4L\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers 55587854 and 55569839\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this replacement tube constructed to withstand engine conditions?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY return tube uses a soft rubber compound engineered to absorb engine vibration and tolerate repeated thermal cycles. Its material choice helps prevent hardening and cracking that cause leaks, while the included gasket ensures a secure seal at the connection point.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoft rubber compound for vibration damping\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant design to handle turbo temperatures\u003c\/li\u003e\n  \u003cli\u003eManufactured to match OEM geometry for a sealed fit\u003c\/li\u003e\n  \u003cli\u003eGasket included to prevent oil seepage at the flange\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what’s included in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for technicians and experienced DIYers familiar with turbo oil line removal. The product ships ready for a direct swap—remove the old tube and gasket, install the AUTOKAY tube, and reattach the oil return hose to resume normal oil flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains 1x turbo oil return pipe tube (55587854) and 1x gasket\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design minimizes modification or fabrication\u003c\/li\u003e\n  \u003cli\u003eRecommended to replace the gasket during install to ensure a leak-free seal\u003c\/li\u003e\n  \u003cli\u003eTorque and connection checks advised after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or checks should I perform after fitting this part?\u003c\/h3\u003e\n\u003cp\u003eAfter replacement, inspect the installation area for any signs of oil seepage and verify turbocharger oil circulation. Routine post-install checks help catch loose connections or minor leaks before they become larger issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStart the engine and check for visible oil leaks around the pipe and gasket\u003c\/li\u003e\n  \u003cli\u003eMonitor oil level and turbo performance for several short drives\u003c\/li\u003e\n  \u003cli\u003eRe-torque fasteners if recommended by the vehicle service manual\u003c\/li\u003e\n  \u003cli\u003eInspect the tube periodically for wear or soft spots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Mechanics, independent repair shops, and hands-on vehicle owners who need a reliable, OEM-equivalent turbo oil return tube for GM 1.4L turbo engines. If your Cruze, Sonic, Trax, or Buick Encore shows signs of oil leaks from the turbo area or you’re rebuilding the turbo system, this AUTOKAY tube and gasket offer a practical direct-replacement solution to restore proper oil return and reduce the chance of future leakage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this part replace OEM 55587854 and 55569839?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This AUTOKAY tube is a direct replacement compatible with OEM numbers 55587854 and 55569839.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2015 Chevrolet Sonic 1.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The tube fits 2012–2019 Chevrolet Sonic 1.4L models. Verify engine type before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67593926934713,"sku":"B083GRXRYW","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-view-turbo-oil-return-pipe.jpg?v=1790580797"},{"product_id":"autokay-engine-air-filter-2-pack-for-nissan-infiniti-16546-jk20a-direct-fit-oem-replacement","title":"AUTOKAY Engine Air Filter 2-Pack for Nissan\/Infiniti 16546-JK20A — Direct-Fit, OEM Replacement","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY 2-pack engine air filters (part 16546-JK20A) replace clogged factory elements to restore airflow, protect intake components, and help the engine run cleanly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of AUTOKAY engine air filters is engineered as a direct-fit replacement for specific Nissan and Infiniti naturally aspirated V6 models. Each filter meets the listed OEM cross-reference numbers so you can swap them in without modifying the airbox. They are designed to trap dust and debris while maintaining the flow your engine needs for consistent throttle response and efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers are these filters compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThe AUTOKAY filters match several OEM and aftermarket reference numbers and fit a range of Nissan and Infiniti V6 models. They are intended for naturally aspirated 2.5L, 3.5L, and 3.7L engines only, not turbocharged variants.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers: 16546-JK20A, 16546JK20A, 16546-JK20B, CA10544, PA5824X, 49362, A35824.\u003c\/li\u003e\n  \u003cli\u003eInfiniti fits: G37 (2008–2013), EX37 (2013), Q40 (2015), Q60 (2014–2015), QX50 (2014–2017), G35 (2007–2008), EX35 (2008–2012), G25 (2011–2012).\u003c\/li\u003e\n  \u003cli\u003eNissan fits: 350Z 3.5L (2007–2009), 370Z 3.7L (2009–2020).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these filters affect engine performance and protection?\u003c\/h3\u003e\n\n\u003cp\u003eThese replacement filters capture airborne particles that would otherwise reach the throttle body and intake manifold, helping maintain clean airflow and preserve engine components. Cleaner air means the combustion process is less prone to contamination, which supports consistent power delivery and throttle feel.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTraps dust and road debris before it enters the intake.\u003c\/li\u003e\n  \u003cli\u003ePreserves sensor and valve cleanliness for smoother operation.\u003c\/li\u003e\n  \u003cli\u003eMaintains airflow to support consistent engine response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these filters easy to install and do they fit like OEM parts?\u003c\/h3\u003e\n\n\u003cp\u003eYes — AUTOKAY filters are manufactured to the same shape and sealing dimensions as the original units, allowing a straightforward swap in most vehicles. Installation typically requires only the removal of the airbox cover and replacement of the old element with the new one.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design eliminates trimming or modification.\u003c\/li\u003e\n  \u003cli\u003eStandard hand tools or clips are usually sufficient for installation.\u003c\/li\u003e\n  \u003cli\u003eIncluded pair gives front-and-spare or two-vehicle coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about engine compatibility and limitations?\u003c\/h3\u003e\n\n\u003cp\u003eThese filters are suitable for naturally aspirated engines specified above and are not compatible with turbocharged or forced-induction versions. Verify your vehicle’s engine displacement and induction type before purchasing to ensure a correct match.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOnly for 3.7L, 3.5L, and 2.5L naturally aspirated engines.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for turbocharged or supercharged engines.\u003c\/li\u003e\n  \u003cli\u003eCheck your owner’s manual or existing filter part number to confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own the listed Nissan or Infiniti models and need a dependable, budget-friendly air filter replacement that matches OEM references. It’s ideal for DIY mechanics wanting an easy, accurate swap and for anyone who prefers keeping a spare filter on hand. Choose AUTOKAY when you want a direct-fit, economical replacement that focuses on restoring clean airflow and basic intake protection without changing factory airflow characteristics.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this AUTOKAY filter fit turbocharged models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These filters are for naturally aspirated 2.5L, 3.5L, and 3.7L engines only, not turbocharged vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What OEM part numbers does this replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces 16546-JK20A, 16546JK20A, 16546-JK20B and several cross-references like CA10544 and PA5824X.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67594653171897,"sku":"B0837R7ST7","price":62.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-packaging-2pack.jpg?v=1790584476"},{"product_id":"autokay-front-door-lock-cylinder-pair-for-honda-left-right-with-2-keys-direct-fit-oem-style","title":"AUTOKAY Front Door Lock Cylinder Pair for Honda (Left \u0026 Right) with 2 Keys, Direct-Fit OEM-Style","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY's front door lock cylinder pair replaces both left and right driver-side locks and comes with two keys for a direct fit on many Honda models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement set is built for owners who need to restore secure, smooth door locking on compatible Hondas without rekeying or complex modifications. Each package contains a matched left and right front door lock cylinder plus two keys, making it a convenient, ready-to-install solution. The components meet the OEM-style fitment referenced by common part numbers and cover a wide range of late-1990s through 2011 Honda vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Honda models and years will these lock cylinders fit?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY door lock cylinders are designed for front left (driver) and front right (passenger) doors on several Honda platforms. Compatibility spans multiple model years and platforms commonly serviced by these part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1998–2002 Honda Accord\u003c\/li\u003e\n  \u003cli\u003e2001–2005 Honda Civic\u003c\/li\u003e\n  \u003cli\u003e1999–2004 Honda Odyssey\u003c\/li\u003e\n  \u003cli\u003e2000–2009 Honda S2000\u003c\/li\u003e\n  \u003cli\u003e2002–2006 Honda CR-V\u003c\/li\u003e\n  \u003cli\u003e2003–2011 Honda Element\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat part numbers and components are included in the package?\u003c\/h3\u003e\n\u003cp\u003eThe set includes both front door lock cylinders and a pair of keys; the hardware corresponds to known interchange part numbers used for these vehicles. This helps technicians and DIYers confirm fitment against service references before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInterchange part numbers: 72145-S73-003, 72146-S73-003, 72145S73003, 72146S73003\u003c\/li\u003e\n  \u003cli\u003ePackage contents: 1 pair (left \u0026amp; right) front door locks and 2 keys\u003c\/li\u003e\n  \u003cli\u003eMatched cylinders so both doors operate with the supplied keys\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for someone with basic automotive tools and door-panel removal experience. Most installers will remove the interior door panel, detach the old cylinder, and swap in the AUTOKAY unit using original mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-in replacement using existing fasteners and linkages\u003c\/li\u003e\n  \u003cli\u003eNo vehicle reprogramming required—mechanical key operation\u003c\/li\u003e\n  \u003cli\u003eTypical install time: 30–90 minutes per door depending on experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lock cylinders work with my existing key or remote?\u003c\/h3\u003e\n\u003cp\u003eThese are mechanical lock cylinders supplied with two keys keyed to the new cylinders; they do not interface with electronic remotes or require electronic pairing. If you need a key that matches your old locks, consult a locksmith for rekeying options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupplied keys operate only the included cylinders\u003c\/li\u003e\n  \u003cli\u003eRemote\/fob functions remain unchanged; lock cylinders are mechanical\u003c\/li\u003e\n  \u003cli\u003eRekeying can be performed by a qualified locksmith if desired\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY front door lock cylinder pair is aimed at Honda owners, independent mechanics, and collision shops needing a reliable mechanical replacement for worn, damaged, or missing front door locks on Accord, Civic, Odyssey, S2000, CR-V, and Element models within the listed years. Choose this set if you want an OEM-style, matched left-and-right solution that arrives ready to install with two keys and known interchange part numbers for easy verification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these locks compatible with my Honda's original key?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The cylinders are supplied with two new keys; they are not cut to your original key. A locksmith can rekey them to match your existing key if needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install these door lock cylinders?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools and door-panel removal tools are usually sufficient. No electronic programming is required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67594738303161,"sku":"B07KWY9G5M","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-door-locks-packaging.jpg?v=1790585110"},{"product_id":"autokay-injector-adapters-for-lq4-lq9-4-8-5-3-6-0-8-pack-delphi-mini-to-ev6-uscar-plug-plug-and-play","title":"AUTOKAY Injector Adapters for LQ4 LQ9 4.8\/5.3\/6.0 — 8‑Pack Delphi Mini to EV6\/USCAR Plug, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY injector adapters are an 8-piece wiring solution that lets 1999-and-up GM Delphi Mini harnesses connect to LS2\/LS3\/LS7 (USCAR\/EV6) style fuel injectors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you’re swapping injectors or updating an engine in a 1999+ GM full-size truck or SUV, the wiring ends don’t always match the new EV6\/USCAR-style injectors. These AUTOKAY adapters bridge the factory Delphi mini harness plugs used on LQ4\/LQ9 and 4.8\/5.3\/6.0 GM engines to modern LS2, LS3, and LS7 injector pins so you can install updated injectors without cutting or re-pinning the original wiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adapters fit my GM truck harness?\u003c\/h3\u003e\n\u003cp\u003eThe adapters plug directly into the factory Delphi Mini connector on the vehicle side and present a USCAR \/ EV6 style plug for the injector side. They’re designed to match the OEM connector shape so installation is plug-and-play in most cases, preserving the original harness integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8 adapters included — one per cylinder for V8 engines.\u003c\/li\u003e\n  \u003cli\u003eVehicle-side mating: Delphi Mini connector compatible with 1999+ GM trucks.\u003c\/li\u003e\n  \u003cli\u003eInjector-side mating: USCAR\/EV6 profile for LS2, LS3, LS7 injectors.\u003c\/li\u003e\n  \u003cli\u003eNo splicing or permanent modification to the factory harness required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these adapters work with the specific injectors I’m installing?\u003c\/h3\u003e\n\u003cp\u003eThey’re built to adapt common LS-series EV6\/USCAR injectors to older GM Delphi harnesses. Confirm by comparing the physical plug shapes shown in the product photos with your injector and harness connectors before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with EV6-style injectors used on LS2, LS3, LS7 platforms.\u003c\/li\u003e\n  \u003cli\u003eCheck receiver and plug photos to ensure connector match.\u003c\/li\u003e\n  \u003cli\u003eDesigned for fuel injectors with USCAR\/EV6 pin layout and seal dimensions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and durable are these wiring adapters?\u003c\/h3\u003e\n\u003cp\u003eAUTOKAY manufactures these adapters for automotive environments, using materials meant to withstand engine-bay heat, vibration, and typical road conditions. They’re meant as a practical retrofit component, though proper installation and routine inspection are recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust molded connectors to resist moisture and debris entry.\u003c\/li\u003e\n  \u003cli\u003eSecure latch features to prevent accidental disconnects under vibration.\u003c\/li\u003e\n  \u003cli\u003eEight-piece kit covers complete V8 injector banks for a full swap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install them safely and where should I check fitment?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: unplug the factory injector harness, plug in the AUTOKAY adapter to the harness, then plug the injector into the adapter’s USCAR connector. Verify connector seating and routing away from hot or moving parts, and test for injector operation before final reassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect battery before starting electrical work.\u003c\/li\u003e\n  \u003cli\u003eInspect connectors and pins for damage or corrosion prior to connecting.\u003c\/li\u003e\n  \u003cli\u003eRoute adapters and secure with clips or zip-ties, avoiding manifolds and pulleys.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These AUTOKAY injector adapters are aimed at DIY mechanics, engine builders, and professional technicians updating GM 4.8\/5.3\/6.0 LQ4\/LQ9 platforms to LS2\/LS3\/LS7-style injectors. If you need to retain the factory Delphi Mini harness while fitting modern EV6\/USCAR injectors, this eight-piece kit provides a clean, reversible wiring solution that preserves factory wiring and simplifies installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these adapters require cutting the factory wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — they plug into the Delphi Mini harness and provide USCAR injector plugs, avoiding wire cutting or re‑pinning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will one kit cover a V8 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package contains eight adapters, enough for all cylinders on a V8 application.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67595611668665,"sku":"B00ZH3US48","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-adapters-front-view.jpg?v=1790590867"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/autokay-adapters-front-view_7a3b9955-971a-4eba-a8bf-d9639b4a64a0.jpg?v=1790612576","url":"https:\/\/redleafauto.ca\/collections\/autokay.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}