{"title":"AUTOPTIM","description":"\u003cp\u003eBrowse 23 AUTOPTIM products at RedLeaf Auto, including car organizers \u0026amp; consoles. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"autoptim-m14x2-0-oem-style-lug-nuts-24pc-chrome-one-piece-60-seat-direct-fit-for-2003-2014-ford-lincoln","title":"AUTOPTIM M14x2.0 OEM-Style Lug Nuts – 24pc Chrome, One-Piece 60° Seat, Direct-Fit for 2003–2014 Ford\/Lincoln","description":"\u003cp\u003e\u003cstrong\u003eThese AUTOPTIM M14x2.0 closed-end chrome lug nuts (24 pieces) are OEM-style, one-piece replacements designed to fit 2003–2014 Ford and Lincoln trucks and SUVs while delivering strong corrosion resistance and factory-fit reliability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need to replace worn or missing wheel nuts on Ford F-150, Expedition, Lincoln Mark LT, or Lincoln Navigator models from the mid-2000s to 2014, the AUTOPTIM M14x2.0 set provides a direct-fit option. Built as solid, one-piece conical (60°) seat lug nuts with a chrome finish, these hardware pieces are cold-forged, heat-treated, and sized to meet original-equipment dimensions so you can restore wheel security and maintain the factory appearance.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Ford or Lincoln wheel?\u003c\/h3\u003e\n\u003cp\u003eYes — these nuts are made to match common OEM wheel specifications for several Ford and Lincoln models produced between 2003 and 2014. They use an M14x2.0 thread pitch, 13\/16\" (21 mm) hex drive, and a tapered 60° seat to fit factory-style wheels without adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM14 x 2.0 thread — direct replacement for compatible studs\u003c\/li\u003e\n  \u003cli\u003e13\/16\" (21 mm) hex — standard socket size for installation\u003c\/li\u003e\n  \u003cli\u003e60° conical seat — matches factory wheel taper\u003c\/li\u003e\n  \u003cli\u003eLength 55 mm, width 31 mm — OEM-style proportions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these chrome lug nuts?\u003c\/h3\u003e\n\u003cp\u003eThese AUTOPTIM lug nuts are cold-forged and heat-treated, then finished with a triple chrome plating to resist rust and extend service life. The one-piece construction reduces the risk of loosening or cracking that can occur with multi-piece designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-forged steel core for toughness under load\u003c\/li\u003e\n  \u003cli\u003eHeat-treated to improve strength and wear resistance\u003c\/li\u003e\n  \u003cli\u003eTriple chrome plating for long-lasting rust protection\u003c\/li\u003e\n  \u003cli\u003eClosed-end design keeps debris out of the threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and fit details should I know before buying?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward with the correct 13\/16\" (21 mm) socket and a torque wrench set to your vehicle manufacturer’s wheel torque specification. The closed-end, one-piece nut requires no special adapters and is sized to maintain the factory wheel seating and clearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse 21 mm socket and specified torque per vehicle manual\u003c\/li\u003e\n  \u003cli\u003eClosed-end design protects stud threads from contaminants\u003c\/li\u003e\n  \u003cli\u003eOne-piece nut avoids moving sleeves or separate caps\u003c\/li\u003e\n  \u003cli\u003eSold as a 24-piece set — enough for full wheel replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lug nuts a safe long-term replacement?\u003c\/h3\u003e\n\u003cp\u003eDesigned as solid one-piece components, they reduce potential failure points compared with two-piece nuts. Precision thread machining helps ensure a snug fit to the stud, while material and finishing processes extend lifespan under normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece design minimizes cracking risk under stress\u003c\/li\u003e\n  \u003cli\u003ePrecision threads for consistent fit and clamping force\u003c\/li\u003e\n  \u003cli\u003eChrome finish helps prevent corrosion in exposed conditions\u003c\/li\u003e\n  \u003cli\u003eFactory-style geometry preserves wheel alignment and centering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOPTIM M14x2.0 24-piece chrome lug nut set is ideal for owners of 2003–2014 Ford F-150, Ford Expedition, Lincoln Mark LT, and Lincoln Navigator vehicles who want OEM-style replacements that restore wheel appearance and secure fitment. It also suits mechanics and fleet operators seeking durable, corrosion-resistant nuts in bulk for routine wheel maintenance or refurbishments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit a 2010 Ford F-150?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These AUTOPTIM M14x2.0 lug nuts are compatible with 2004–2014 Ford F-150 models using M14x2.0 studs and a 60° tapered seat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size do I need to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 13\/16\" (21 mm) socket and follow your vehicle’s recommended torque specification for safe installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67586968715449,"sku":"B09ZXCS99N","price":117.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-packaging-chrome-lug-nuts.jpg?v=1790498325"},{"product_id":"autoptim-m14x1-5-spline-lug-nuts-32pc-long-2-black-closed-end-security-socket-included","title":"AUTOPTIM M14x1.5 Spline Lug Nuts 32pc - Long 2\" Black Closed-End, Security Socket Included","description":"\u003cp\u003e\u003cstrong\u003eThese AUTOPTIM M14 x 1.5 spline lug nuts are a 32-piece, one-piece steel set with a security spline design and included socket, built to fit many heavy-duty truck wheels and resist rust.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a complete wheel-lug replacement kit for heavy-duty trucks, this AUTOPTIM set supplies long, closed-end acorn lug nuts that match M14 x 1.5 threads and a 60° seat. The nuts are cold-forged, heat-treated steel with a corrosion-resistant finish and include a dedicated splined socket key to deter theft and ensure correct tightening.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my truck model?\u003c\/h3\u003e\n\u003cp\u003eThey are specified for many heavy-duty pickups and HD trucks that use M14 x 1.5 threads and a 60° acorn seat. Always check your vehicle's original lug nut seat and thread pitch before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: M14 x 1.5\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° acorn (bulge\/closed end)\u003c\/li\u003e\n  \u003cli\u003eLength: 2\" (50 mm); hex: 3\/4\" (19 mm)\u003c\/li\u003e\n  \u003cli\u003eIncluded: 32 lug nuts + one splined socket key\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow secure and theft-resistant are these spline lug nuts?\u003c\/h3\u003e\n\u003cp\u003eThese are one-piece, splined lug nuts with a seven-spline safety pattern that requires the supplied socket key to properly torque them. The one-piece construction is more stable than two-piece designs and reduces the risk of loosening or accidental separation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece solid construction for stability\u003c\/li\u003e\n  \u003cli\u003e7-spline safety pattern prevents standard wrenches from fitting\u003c\/li\u003e\n  \u003cli\u003eSupplied socket key is required for proper installation and removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant is the finish?\u003c\/h3\u003e\n\u003cp\u003eManufactured from cold-forged, heat-treated steel, these lug nuts are engineered for strength under heavy loads. A chrome plating improves resistance to rust and corrosion; the finish has passed standardized salt spray testing to extend service life in harsh conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-forged, heat-treated steel core for high strength\u003c\/li\u003e\n  \u003cli\u003eChrome-plated surface for improved rust resistance\u003c\/li\u003e\n  \u003cli\u003eSalt spray tested to help withstand corrosive environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools come with the kit?\u003c\/h3\u003e\n\u003cp\u003eThe set arrives with a dedicated splined socket key sized to the lug nuts, so you have the specialty tool needed for secure fitting. Use a torque wrench set to the vehicle manufacturer's wheel torque spec to avoid overtightening; do not rely on the socket alone for final torque.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e32 lug nuts plus one splined socket included\u003c\/li\u003e\n  \u003cli\u003eUse with a torque wrench to manufacturer torque specs\u003c\/li\u003e\n  \u003cli\u003eClosed-end design helps protect studs and threads from debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This AUTOPTIM M14 x 1.5 spline lug nut set is intended for owners and technicians of heavy-duty trucks — including RAM 2500\/3500, GMC Sierra 2500\/3500 HD, Chevy Silverado 1500\/2500\/3500 HD, and Ford F250\/F350 Super Duty models that share the M14 x 1.5 thread and 60° acorn seat. It suits fleet managers, off-road operators, and any driver who wants a durable, theft-resistant one-piece lug nut upgrade. Remember to confirm your vehicle's lug nut seat type and thread pitch before purchase; contact AUTOPTIM customer service for fitment guidance or if you need assistance during installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit my RAM 3500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your RAM 3500 uses M14 x 1.5 threads and a 60° acorn seat, these will fit. Verify the seat type and thread pitch before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the splined socket included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes one splined socket key required to install and remove the lug nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67587868590265,"sku":"B0BVVQVXC7","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-pack-32pcs.jpg?v=1790515643"},{"product_id":"autoptim-m14x1-5-spline-lug-nuts-24-pack-black-2-long-one-piece-cold-forged-steel","title":"AUTOPTIM M14x1.5 Spline Lug Nuts 24-Pack Black 2\" Long — One-Piece, Cold-Forged Steel","description":"\u003cstrong\u003eAUTOPTIM M14x1.5 spline lug nuts are a set of 24 long, closed-end, one-piece wheel nuts engineered for a tight, corrosion-resistant fit on compatible trucks and SUVs.\u003c\/strong\u003e\n\n\u003cp\u003eIf you need replacement or upgraded wheel nuts for GM and select Ford\/Ram trucks, these AUTOPTIM lug nuts deliver length, strength, and a black finish designed for both function and a clean appearance. They use a 3\/4\" (19 mm) hex, M14 x 1.5 thread, and a tapered 60° seat. Cold-forged, heat-treated steel and zinc with a black finish resist rust while the closed-end, one-piece construction reduces risk of cracking compared with two-piece alternatives.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my truck or SUV?\u003c\/h3\u003e\n\u003cp\u003eThese nuts are designed for vehicles that use M14 x 1.5 thread pitch and a 60° tapered seat. AUTOPTIM lists compatibility across many model years of Chevrolet, GMC, Ram, and select Ford vehicles, but always confirm your vehicle’s thread size and seat type before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: M14 x 1.5\u003c\/li\u003e\n  \u003cli\u003eHex size: 3\/4\" (19 mm)\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° tapered (conical)\u003c\/li\u003e\n  \u003cli\u003eLength: 2\" (50 mm); width: 23 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these one-piece lug nuts improve durability and safety?\u003c\/h3\u003e\n\u003cp\u003eThe one-piece design removes the failure point present in two-piece nuts, offering a solid construction that reduces the chance of cracking or separation under load. Combined with the cold-forged and heat-treated steel process, these nuts are built to be more robust for everyday driving and heavier-duty use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid one-piece construction for fewer failure points\u003c\/li\u003e\n  \u003cli\u003eCold-forged and heat-treated steel increases tensile strength\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined threads ensure a tight fit to studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these lug nuts resist rust and wear?\u003c\/h3\u003e\n\u003cp\u003eThe surface protection consists of zinc with a black finish that helps resist corrosion and maintain appearance. Closed-end nuts also keep dirt and moisture out of the nut cavity, which helps extend service life compared with open-ended designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eZinc plus black coating for rust resistance\u003c\/li\u003e\n  \u003cli\u003eClosed-end style prevents contamination of threads\u003c\/li\u003e\n  \u003cli\u003eFactory-tested finish for longer-lasting look and function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and service are included with the purchase?\u003c\/h3\u003e\n\u003cp\u003eThis listing includes 24 AUTOPTIM spline lug nuts and the matching socket for installation. AUTOPTIM provides support if you have questions before or after buying and backs the product with 12 months of customer service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage: 24 lug nuts (black), long 2\" length\u003c\/li\u003e\n  \u003cli\u003eIncluded: installation socket compatible with 3\/4\" (19 mm) hex\u003c\/li\u003e\n  \u003cli\u003eSupport: 12 months customer service from AUTOPTIM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These AUTOPTIM M14x1.5 lug nuts suit owners of compatible Chevrolet, GMC, Ram, and certain Ford pickups and SUVs who want a long, strong, corrosion-resistant wheel nut with a clean black appearance. They are especially appropriate for drivers replacing worn or damaged lug nuts, upgrading from two-piece designs, or fitting aftermarket wheels that accept M14x1.5 tapered-seat hardware. Always verify your vehicle’s thread size and seat angle before ordering to ensure safe, correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with my Chevrolet Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—AUTOPTIM M14x1.5 nuts fit many Silverado model years listed, but confirm your truck uses M14 x 1.5 threads and a 60° tapered seat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these come with a socket for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the set includes a matching 3\/4\" (19 mm) socket to install the lug nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67588469063865,"sku":"B0CJFGJLNQ","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-view-packaged-lug-nuts.jpg?v=1790519063"},{"product_id":"autoptim-9-16-18-lug-nuts-for-dodge-ram-32-pc-chrome-3-4-19mm-hex-60-taper","title":"AUTOPTIM 9\/16-18 Lug Nuts for Dodge Ram — 32 pc Chrome, 3\/4 (19mm) Hex, 60° Taper","description":"\u003cstrong\u003eAUTOPTIM 9\/16-18 lug nuts are a set of 32 chrome, one-piece, 3\/4\" (19 mm) hex conical lug nuts engineered to replace factory wheel nuts on many Dodge Ram trucks.\u003c\/strong\u003e\n\n\u003cp\u003eThese lug nuts combine a durable chrome finish with cold-forged, heat-treated steel and a one-piece conical design to provide a reliable, corrosion-resistant replacement for worn or missing wheel fasteners. They are made to fit 9\/16-18 threads and offer a 60° tapered seat that matches many Dodge Ram wheels. The 3\/4\" hex head and 1.87\" (48 mm) overall length deliver accessible torque and good engagement for both 5-lug and 6-lug setups.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Dodge Ram?\u003c\/h3\u003e\n\u003cp\u003eThey are specified for wheels using 9\/16-18 threaded lug studs and a 60° tapered seat, which covers a wide range of Dodge Ram models. The listing cites fitment for Ram 1500 (2002–2010), Ram 2500 and 3500 (1994–2010) and earlier Ram vans where 9\/16-18 is standard. Always confirm your vehicle’s lug thread and seat angle before ordering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: 9\/16-18 standard for listed Ram years\u003c\/li\u003e\n\u003cli\u003eSeat: 60° tapered to match factory conical wheels\u003c\/li\u003e\n\u003cli\u003eHex size: 3\/4\" (19 mm) for sockets and wrenches\u003c\/li\u003e\n\u003cli\u003eLength: 1.87\" (48 mm) overall for secure engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these differ from two-piece or decorative lug nuts?\u003c\/h3\u003e\n\u003cp\u003eThese are solid one-piece nuts, which removes a seam that can be a weak point in two-piece designs. The single-piece construction improves strength under load and reduces chances of cracking or loosening. The chrome plating adds rust resistance while keeping a traditional polished appearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstruction: one-piece solid lug nut for greater structural integrity\u003c\/li\u003e\n\u003cli\u003eFinish: triple chrome plating for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eManufacture: cold-forged and heat-treated steel for durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and torque settings work with these lug nuts?\u003c\/h3\u003e\n\u003cp\u003eThe nuts accept a 3\/4\" (19 mm) socket, common in most toolkits and impact wrenches. Torque values depend on the vehicle and stud specifications—reference your vehicle’s factory torque chart or a service manual for the correct setting. Use a calibrated torque wrench to tighten in a star pattern for even clamping.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSocket: 3\/4\" (19 mm) standard socket or impact socket\u003c\/li\u003e\n\u003cli\u003eTightening: use a torque wrench and star pattern tightening sequence\u003c\/li\u003e\n\u003cli\u003eReference: consult vehicle manual for exact torque spec\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the finish and material affect long-term use?\u003c\/h3\u003e\n\u003cp\u003eThe cold-forged steel core combined with heat treatment increases toughness against shear and fatigue, while the chrome coating helps slow surface corrosion and maintains appearance. Proper installation and regular inspection will maximize service life; replacing damaged or excessively corroded nuts is recommended. The design prioritizes function first with a classic chrome look as a secondary benefit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: heat-treated, cold-forged steel for strength\u003c\/li\u003e\n\u003cli\u003eCoating: chrome finish to resist rust and preserve look\u003c\/li\u003e\n\u003cli\u003eMaintenance: periodic inspection and replacement when worn\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These AUTOPTIM lug nuts suit Dodge Ram owners and mechanics who need a robust, OEM-compatible replacement in bulk (32 pieces) for trucks with 9\/16-18 wheel studs and 60° tapered seats. They’re appropriate for drivers seeking a reliable one-piece fastener with a chrome finish for stock or lightly customized wheels, and for shops that prefer standardized 3\/4\" hex hardware for efficient installation and service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit 5‑lug and 6‑lug Dodge Ram wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They fit both 5-lug and 6-lug wheels that use 9\/16-18 threads and a 60° tapered seat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size do I need to install these nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 3\/4\" (19 mm) socket or impact socket; tighten to your vehicle’s specified torque.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67588773150905,"sku":"B0CW5V46CN","price":96.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-packaging-chrome-lug-nuts_3fffc340-5b48-49df-94f7-3e29c5496e5e.jpg?v=1790524666"},{"product_id":"autoptim-9-16-18-oem-lug-nuts-for-dodge-20pc-chrome-60-conical-seat-cold-forged-steel","title":"AUTOPTIM 9\/16-18 OEM lug nuts for Dodge — 20pc Chrome, 60° conical seat, cold-forged steel","description":"\u003cp\u003e\u003cstrong\u003eAUTOPTIM 9\/16-18 OEM lug nuts are a 20-piece, chrome-plated, one-piece replacement set engineered to fit Dodge factory-style wheels with a 60° conical seat.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are made for drivers who need a direct-fit, durable replacement for original equipment on many Dodge trucks and SUVs. Cold-forged, heat-treated steel construction and a chrome finish give them strength and improved resistance to rust. The set includes 20 solid closed-end nuts sized to match common Dodge factory wheel specifications — verify your original nut seat and thread pitch before ordering to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Dodge wheel?\u003c\/h3\u003e\n\u003cp\u003eThey are designed for factory-style wheels that accept 9\/16-18 threads with a 60° conical (tapered) seat. Fitment covers several Dodge trucks and SUVs from the early 2000s; however, wheel and nut variations exist across model years and trims, so cross-checking is essential.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread pitch: 9\/16-18 (standard for many Dodge factory studs)\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical (tapered) — confirm your original nuts\u003c\/li\u003e\n  \u003cli\u003eQuantity: 20 nuts per set for multiple wheels or spares\u003c\/li\u003e\n  \u003cli\u003eDimensions: 1.54\" (39 mm) height; 7\/8\" (22 mm) hex; 1.03\" (26 mm) width\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these nuts?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are cold-forged and heat-treated to increase tensile strength and wear resistance compared with lower-quality fasteners. A chrome-plated finish adds a protective barrier against moisture and road chemicals; the plating has been salt-spray tested to extend service life under corrosive conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: cold-forged, heat-treated steel for higher strength\u003c\/li\u003e\n  \u003cli\u003eFinish: chrome plating for improved rust and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eTesting: salt-spray testing performed to validate plating durability\u003c\/li\u003e\n  \u003cli\u003eDesign: solid closed-end, one-piece construction to resist loosening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and installation details should I know?\u003c\/h3\u003e\n\u003cp\u003eEach nut uses a 7\/8\" (22 mm) hex size, so a properly sized socket or wrench is required for tightening to the vehicle manufacturer’s recommended torque. The one-piece, closed-end design simplifies handling and reduces the chance of component separation during installation and service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequired tool: 7\/8\" (22 mm) socket or wrench\u003c\/li\u003e\n  \u003cli\u003eTorque: tighten to the vehicle maker’s specified torque setting (use a torque wrench)\u003c\/li\u003e\n  \u003cli\u003eInstallation style: one-piece, closed-end — no sleeve or cap to lose\u003c\/li\u003e\n  \u003cli\u003eSafety tip: inspect wheel studs for damage before installing new nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these replacements safe and backed by support?\u003c\/h3\u003e\n\u003cp\u003eOne-piece construction reduces the number of potential failure points compared with multi-part nuts and helps maintain clamp force under normal driving conditions. AUTOPTIM offers customer support for a year after purchase to assist with fitment questions or concerns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafety: one-piece design for improved stability and reliability\u003c\/li\u003e\n  \u003cli\u003eSupport: 12 months of customer service from the brand\u003c\/li\u003e\n  \u003cli\u003eUse case: suitable for everyday driving and replacement needs\u003c\/li\u003e\n  \u003cli\u003eInspection: replace any nut showing stripped threads or severe corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 20-piece AUTOPTIM lug nut set is intended for owners of Dodge Ram 1500, Durango, Dakota and similar models that require 9\/16-18 thread pitch and a 60° conical seat who want a direct-fit OEM-style replacement. It’s a practical choice for mechanics, fleet operators, and DIYers replacing worn or lost lug nuts, or for those who prefer chrome-finished hardware for appearance and added corrosion protection. Always verify your vehicle’s lug nut seat type and thread specification before purchase to ensure proper fit and safe use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit Dodge Ram 1500 wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many 2002–2010 Dodge Ram 1500 factory-style wheels with 9\/16-18 threads and a 60° seat. Confirm your original nut seat and thread before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size do I need to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 7\/8\" (22 mm) socket; tighten to the manufacturer's specified torque with a torque wrench.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67588773183673,"sku":"B0BVVMQLZ3","price":90.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-packaging-chrome-lug-nuts_ebe6c43a-3bb8-4d3a-a8f7-f11ba13df568.jpg?v=1790524665"},{"product_id":"autoptim-85l-collapsible-car-trunk-organizer-x-large-black-3-compartments-velcro-anchors","title":"AUTOPTIM 85L Collapsible Car Trunk Organizer - X-Large Black, 3 Compartments \u0026 Velcro Anchors","description":"\u003cp\u003e\u003cstrong\u003eThe AUTOPTIM 85L collapsible trunk organizer is a heavy-duty, fold-flat storage solution with three main compartments and multiple pockets to keep groceries, tools, and gear secure in your car.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for everyday drivers who need flexible, high-capacity storage, this X-large organizer balances durable construction with convenient collapse-and-store functionality. Built from 600D Oxford polyester with reinforced stitching and Velcro anchoring, it prevents shifting on the road and folds flat for easy storage when not in use. The generous internal volume and external pockets make it simple to separate fragile items, cleaning supplies, and sports equipment while protecting your trunk from spills and mess.\u003c\/p\u003e\n\n\u003ch3\u003eHow much cargo can this organizer hold?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOPTIM trunk organizer provides an expansive 85-liter capacity sized to fit large grocery hauls, bulky tools, or multiple sports bags. Its three main compartments let you organize items by type or fragility, while side pockets store smaller accessories for quick access.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExternal dimensions: 31.9\" L × 14.6\" W × 10.6\" H for wide trunk coverage\u003c\/li\u003e\n  \u003cli\u003eThree large internal compartments for bulk items\u003c\/li\u003e\n  \u003cli\u003eMultiple side pockets for bottles, cables, and small tools\u003c\/li\u003e\n  \u003cli\u003eHolds groceries, emergency kits, sports gear, and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the AUTOPTIM organizer durable and road-ready?\u003c\/h3\u003e\n\u003cp\u003eDurability comes from robust materials and reinforced construction: 600D Oxford polyester resists wear, and targeted stitching strengthens stress points. The bottom features Velcro anchors that secure the organizer to many trunk surfaces, reducing sliding and tipping while driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e600D Oxford polyester exterior resists tears and stains\u003c\/li\u003e\n  \u003cli\u003eReinforced seams at corners and load-bearing areas\u003c\/li\u003e\n  \u003cli\u003eVelcro base holds the unit in place during transit\u003c\/li\u003e\n  \u003cli\u003eEasy-to-clean material for fast maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I fold it down when I don’t need it?\u003c\/h3\u003e\n\u003cp\u003eYes — the design includes side Velcro fasteners that let you collapse the organizer completely flat or fold it in half to suit different storage spaces. When flattened, it tucks neatly under seats or behind trunk panels so it won’t take up room when you need a clear cargo area.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSide Velcro panels to fold flat or half-size quickly\u003c\/li\u003e\n  \u003cli\u003eCompact storage when not in use — ideal for small garages\u003c\/li\u003e\n  \u003cli\u003eLightweight and portable for moving between vehicles or to the home\u003c\/li\u003e\n  \u003cli\u003eSimple reassembly without tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this organizer keep items from sliding while driving?\u003c\/h3\u003e\n\u003cp\u003eThe bottom Velcro pad secures the organizer to compatible trunk carpets, minimizing movement and reducing the chance of spills. Internal dividers and deep compartments further stabilize contents so fragile or stacked items remain upright during turns and braking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-slip Velcro base to anchor the organizer\u003c\/li\u003e\n  \u003cli\u003eDeep internal compartments prevent items from toppling\u003c\/li\u003e\n  \u003cli\u003eSide pockets hold loose accessories for added stability\u003c\/li\u003e\n  \u003cli\u003eWorks with most trunk carpet surfaces for steady placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOPTIM 85L collapsible trunk organizer suits drivers who regularly carry groceries, emergency kits, sports equipment, or tools and want a rugged, large-capacity solution that tucks away when not needed. It’s a practical choice for families, ride-share drivers, outdoor enthusiasts, and anyone who prefers an organized, spill-free trunk. Backed by a 12-month customer service commitment, AUTOPTIM provides support for setup and product questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the organizer water-resistant and easy to clean?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 600D Oxford polyester resists light moisture and wipes clean with a damp cloth; avoid heavy soaking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit in small cars and SUVs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. At 31.9\" × 14.6\" × 10.6\", it fits most trunks and can fold flat for compact storage when needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67588818370745,"sku":"B0FPF42BXZ","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-view-packaging.jpg?v=1790525636"},{"product_id":"autoptim-m12x1-5-lug-nuts-24-piece-chrome-set-for-toyota-wheels-60-tapered-seat-3-4-hex","title":"AUTOPTIM M12x1.5 Lug Nuts 24-Piece Chrome Set for Toyota Wheels — 60° Tapered Seat, 3\/4\" Hex","description":"\u003cp\u003e\u003cstrong\u003eAUTOPTIM M12x1.5 lug nuts are a 24-piece chrome, one-piece set engineered to fit many Toyota and select aftermarket wheels with a 60° tapered seat.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts combine a closed-end chrome finish with cold-forged, heat-treated steel for corrosion resistance and long service life. Designed with a 3\/4\" (19 mm) hex, 35 mm length and M12 x 1.5 threading, this set provides a precise, secure fit for popular models of Toyota trucks and SUVs as well as some aftermarket applications. The one-piece construction reduces the risk of component separation and improves torque transfer compared with two-piece designs.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Toyota truck or SUV?\u003c\/h3\u003e\n\n\u003cp\u003eThey are manufactured to the M12 x 1.5 spec with a 60° tapered seat, matching the factory-style lug interface used on many Toyota vehicles and compatible aftermarket wheels. Always check your vehicle’s thread pitch, seat type and seat angle before purchase to confirm compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThread: M12 x 1.5\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° tapered (conical)\u003c\/li\u003e\n  \u003cli\u003eHex size: 3\/4\" (19 mm)\u003c\/li\u003e\n  \u003cli\u003eLength: 35 mm, width: 22 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these lug nuts hold up against rust and wear?\u003c\/h3\u003e\n\n\u003cp\u003eThese lug nuts are cold-forged and heat-treated, then finished with a triple chrome plating designed to resist surface corrosion and chips from road debris. The closed-end design helps keep moisture and contaminants out of the stud area for extended protection in wet climates.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTriple chrome finish for enhanced corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eClosed-end tops reduce water and salt exposure to studs\u003c\/li\u003e\n  \u003cli\u003eHeat-treated steel for improved strength and fatigue resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat advantages does a one-piece lug nut offer over two-piece designs?\u003c\/h3\u003e\n\n\u003cp\u003eThe single-piece construction eliminates a separate cap or sleeve that can loosen or crack, providing a more rigid connection between nut and stud. That rigidity improves torque transfer, reduces the chance of components separating under load, and typically increases service life when properly installed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSolid one-piece body minimizes cracking points\u003c\/li\u003e\n  \u003cli\u003eTighter thread fit reduces play on the wheel stud\u003c\/li\u003e\n  \u003cli\u003eSimpler design means fewer failure modes and easier maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and tools?\u003c\/h3\u003e\n\n\u003cp\u003eThese nuts accept a standard 3\/4\" (19 mm) socket; apply torque to manufacturer specifications using a calibrated torque wrench. Because they are closed-end, use sockets that fully engage the hex without relying on internal access to prevent damage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRequired socket: 3\/4\" (19 mm)\u003c\/li\u003e\n  \u003cli\u003eTorque to vehicle manufacturer's wheel nut specification\u003c\/li\u003e\n  \u003cli\u003eInspect threads and studs for damage before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this set is for: drivers who need a full replacement or upgrade for Toyota and compatible aftermarket wheels that use M12 x 1.5 threads and a 60° tapered seat. The 24-piece chrome kit suits owners replacing all four wheels plus spares or preparing a two-wheel\/tire swap. It’s also a good pick for mechanics and DIYers seeking a one-piece, corrosion-resistant lug nut with familiar hex sizing and robust build quality.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with aftermarket Toyota wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if the wheel uses M12 x 1.5 threads and a 60° tapered seat. Confirm your wheel's thread pitch and seat type before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts require a special socket or key?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special key is required; they use a standard 3\/4\" (19 mm) socket. Torque with a calibrated wrench to manufacturer specs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67591064125625,"sku":"B0CS27X31X","price":79.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-view-packaging_65705177-d4d6-429f-80ac-c63e8f0ef41b.jpg?v=1790540418"},{"product_id":"autoptim-m12x1-5-lug-nuts-24-pc-black-conical-60-seat-closed-end-steel","title":"AUTOPTIM M12x1.5 Lug Nuts — 24 Pc Black Conical 60° Seat, Closed-End Steel","description":"\u003cb\u003eA set of 24 black AUTOPTIM M12x1.5 closed-end conical lug nuts designed as aftermarket replacements for many Toyota models.\u003c\/b\u003e\n\n\u003cp\u003eThese lug nuts are engineered as one-piece, cold-forged steel hardware finished in black zinc to resist corrosion and provide a snug fit for compatible aftermarket wheel applications. Intended for vehicles that accept M12 x 1.5 threads and a 60° tapered seat, the set covers a broad range of Toyota trucks and SUVs but is not intended for factory wheels with non-conical seat types.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Toyota?\u003c\/h3\u003e\n\u003cp\u003eThese AUTOPTIM lug nuts are made with M12 x 1.5 threads and a 60° tapered (conical) seat, which is the common standard for many aftermarket wheels on Toyota models. They are listed as replacements for numerous model years of 4Runner, Tacoma, Tundra, and FJ Cruiser when the wheel accepts conical-seat M12 nuts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: M12 x 1.5\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° tapered\/conical\u003c\/li\u003e\n  \u003cli\u003eSelected vehicle compatibility: 1984–2023 4Runner, 1995–2022 Tacoma, 2000–2006 Tundra, 2007–2013 FJ Cruiser\u003c\/li\u003e\n  \u003cli\u003eNot compatible with flat, ball, radius, or 90° mag-seat factory wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these lug nuts constructed and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOPTIM lug nuts use a one-piece design formed by cold forging and then heat-treated for strength. One-piece construction eliminates the joint between components found in two-piece designs, reducing the chance of cracking or loosening under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: heat-treated steel for improved durability\u003c\/li\u003e\n  \u003cli\u003eFinish: black zinc plating to slow corrosion\u003c\/li\u003e\n  \u003cli\u003eDesign: closed-end, one-piece body to protect threads and improve longevity\u003c\/li\u003e\n  \u003cli\u003eHex size: 3\/4\" (19 mm) for standard socket use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical dimensions and practical features?\u003c\/h3\u003e\n\u003cp\u003eEach nut measures approximately 1.38\" (35 mm) in length with a 0.87\" (22 mm) hex width and is tapered to seat securely in conical-lipped wheels. The closed-end shape keeps debris and moisture out of the fastener, preserving the wheel stud and thread engagement over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: ~35 mm (1.38\")\u003c\/li\u003e\n  \u003cli\u003eHex: 19 mm (3\/4\") for common lug sockets\u003c\/li\u003e\n  \u003cli\u003eWidth at widest point: ~22 mm (0.87\")\u003c\/li\u003e\n  \u003cli\u003ePackage count: 24 nuts — enough for two vehicles or a full wheel set plus spares\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these safe to use and what support comes with purchase?\u003c\/h3\u003e\n\u003cp\u003eThese nuts are manufactured to be robust and corrosion-resistant, but because they are aftermarket parts, confirm seat type and thread size before installation. AUTOPTIM offers a 12-month customer service period for assistance with fitment or product questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturing: cold-forged and heat-treated to reduce cracking\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistance: black zinc finish\u003c\/li\u003e\n  \u003cli\u003eSupport: 12 months customer service from AUTOPTIM\u003c\/li\u003e\n  \u003cli\u003eInstallation: use proper torque and verify wheel seat compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and DIYers who need a reliable aftermarket set of M12 x 1.5 conical lug nuts in black for compatible Toyota trucks and SUVs, or for anyone replacing worn or missing lug hardware on aftermarket wheels that require a 60° tapered seat. Confirm your wheel’s seat style and thread specification before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit factory Toyota wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit aftermarket wheels with M12x1.5 threads and a 60° tapered seat; not suitable for certain factory wheels with flat, ball, radius, or 90° mag seats.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size is required to install these lug nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 3\/4\" (19 mm) socket to install or remove these AUTOPTIM lug nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67591064780985,"sku":"B0CS2HV4SG","price":79.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-packaging-lug-nuts_a98c3596-2e5d-4fb9-8bb9-59917530ba72.jpg?v=1790540446"},{"product_id":"autoptim-m12x1-5-spline-lug-nuts-20-pack-chrome-closed-end-with-socket-triple-chrome-60-taper","title":"AUTOPTIM M12x1.5 Spline Lug Nuts 20-Pack Chrome Closed-End with Socket — Triple-Chrome, 60° Taper","description":"\u003cp\u003e\u003cstrong\u003eA 20-piece set of AUTOPTIM M12x1.5 chrome closed-end spline lug nuts with a matching spline socket delivers corrosion-resistant wheel fasteners engineered for one-piece strength and a precise fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are made for drivers who want a reliable aftermarket replacement that matches common M12x1.5 wheel studs on many Honda, Toyota and Chevrolet models. Each nut is cold-forged, heat-treated and triple-chrome plated to resist rust and cracking while providing a tapered 60° seat and a 17 mm hex profile. The kit includes twenty closed-end spline nuts plus the spline socket needed to install or remove them, making it a complete swap when you change wheels or refresh worn lug hardware.\u003c\/p\u003e\n\n\u003ch3\u003eWhich cars and wheels will these lug nuts fit?\u003c\/h3\u003e\n\u003cp\u003eThese AUTOPTIM nuts are designed for wheels that accept M12 x 1.5 thread lug nuts with a 60° tapered seat and a 17 mm hex engagement. They are aftermarket replacements compatible with many model years of Honda, Toyota and Chevrolet, and other vehicles that use the same stud specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fit examples: 1994–2013 Chevrolet Impala, 1982–2019 Chevrolet Malibu\u003c\/li\u003e\n  \u003cli\u003eHonda examples: 1998–2022 Accord, 1997–2022 CR-V, 2004–2022 Civic\u003c\/li\u003e\n  \u003cli\u003eToyota examples: 1983–2020 Camry, 1996–2013 RAV4\u003c\/li\u003e\n  \u003cli\u003eAlways verify your wheel bolt thread, seat angle and hex size before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these one-piece lug nuts improve durability and safety?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOPTIM lug nuts use a one-piece construction rather than a two-piece design, which reduces the chance of separation or cracking under stress. Combined with cold forging and heat treatment, the nuts maintain thread integrity and resist deformation during repeated torqueing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece construction minimizes mechanical weak points and potential failure modes\u003c\/li\u003e\n  \u003cli\u003eCold-forged steel and heat-treated finish increase strength and wear resistance\u003c\/li\u003e\n  \u003cli\u003ePrecision-cut threads ensure secure engagement with wheel studs for consistent torque\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat corrosion protection and finish features are included?\u003c\/h3\u003e\n\u003cp\u003eThe set is finished with a triple chrome plating process that improves resistance to rust and environmental wear compared with untreated steel. The closed-end style also shields the stud tip from moisture and grime, helping extend the life of both nut and stud.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTriple chrome plating reduces oxidation and maintains appearance over time\u003c\/li\u003e\n  \u003cli\u003eClosed-end design prevents contaminants from reaching the stud tip\u003c\/li\u003e\n  \u003cli\u003eRecommended for drivers who live in wet or salted-road regions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how do you install them?\u003c\/h3\u003e\n\u003cp\u003eThe package includes twenty chrome closed-end spline lug nuts and one matching spline socket sized for the nut profile, providing everything needed for a full wheel lug nut replacement. Installation follows standard torque procedures for your vehicle—tighten to manufacturer-specified torque using a torque wrench to ensure safety and proper seating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 20 lug nuts + 1 spline socket, 17 mm hex engagement, 35 mm length\u003c\/li\u003e\n  \u003cli\u003eSeat type: tapered 60° to match most OEM wheel seats\u003c\/li\u003e\n  \u003cli\u003eInstallation tip: torque to vehicle manufacturer specs and re-check after 50–100 miles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOPTIM M12x1.5 spline lug nut kit is aimed at car owners, DIY mechanics and tire shops replacing worn or corroded lug nuts on compatible Honda, Toyota, Chevrolet and other vehicles that use M12x1.5 wheel studs. It’s appropriate for everyday drivers seeking durable, rust-resistant wheel hardware and for anyone swapping wheels who needs a complete, one-piece replacement solution with a dedicated socket included.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with factory wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit factory wheels that use M12x1.5 studs with a 60° tapered seat and 17 mm hex; check your vehicle’s specifications first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the set include the installation socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes one matching spline socket sized for the included lug nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67591064715449,"sku":"B0CW61CN5V","price":62.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-packaging-lug-nuts.jpg?v=1790540444"},{"product_id":"autoptim-m12x1-5-oem-lug-nuts-20-pc-chrome-set-for-honda-radius-seat-wheels-one-piece-durable-finish","title":"AUTOPTIM M12x1.5 OEM Lug Nuts — 20-Pc Chrome Set for Honda Radius-Seat Wheels, One-Piece Durable Finish","description":"\u003cp\u003e\u003cstrong\u003eAUTOPTIM M12x1.5 OEM lug nuts are a set of 20 chrome, one-piece replacement lug nuts engineered to fit Honda and compatible factory-style wheels with an M12 x 1.5 thread and radius seat.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement lug nuts are made to match common Honda factory dimensions while offering corrosion resistance and a one-piece design that reduces failure points. Finished in triple chrome over cold-forged, heat-treated steel, they balance factory appearance with long-term durability. They include detachable plastic washers and are intended for radius-seat wheels—confirm your wheel seat type before buying.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Honda wheels?\u003c\/h3\u003e\n\u003cp\u003eThey are designed for wheels that use an M12 x 1.5 thread and a radius (also called acorn or OEM-style) seat. Fitment covers many Honda and Acura models, but fit depends on the wheel seat angle and stud engagement depth.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: M12 x 1.5\u003c\/li\u003e\n  \u003cli\u003eOverall height: 1.38\" (35 mm)\u003c\/li\u003e\n  \u003cli\u003eBase diameter: 0.90\" (23 mm)\u003c\/li\u003e\n  \u003cli\u003eSeat type: radius seat (not for tapered 60° or mag 90° seats)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these lug nuts constructed for strength and longevity?\u003c\/h3\u003e\n\u003cp\u003eEach nut is manufactured in a one-piece design, cold-forged and heat-treated to reduce the risk of cracking that can occur with multi-piece nuts. A triple chrome finish provides corrosion resistance and a factory-ready shine for years of exposure to weather and road salt.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece construction to avoid separation and cracking\u003c\/li\u003e\n  \u003cli\u003eCold-forged, heat-treated steel for tensile strength\u003c\/li\u003e\n  \u003cli\u003eTriple chrome plating for rust resistance and a mirror look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the set include and how do I install them?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains 20 chrome lug nuts and detachable plastic washers to protect the wheel finish. Installation uses a 3\/4\" hex socket and should follow manufacturer torque specs—over-tightening can damage studs or threads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 20 lug nuts per set\u003c\/li\u003e\n  \u003cli\u003eTool size: 3\/4\" (19 mm) hex socket recommended\u003c\/li\u003e\n  \u003cli\u003eIncludes detachable plastic washers to prevent wheel scratching\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these safe for highway driving and long-term use?\u003c\/h3\u003e\n\u003cp\u003eThe one-piece, precision-threaded design and heat-treated steel aim to provide reliable clamping and reduce failure risk under normal driving conditions. Regular inspection and correct torqueing are essential for ongoing safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision thread fit minimizes loosening\u003c\/li\u003e\n  \u003cli\u003eDurable materials and plating help resist corrosion-related failures\u003c\/li\u003e\n  \u003cli\u003eFollow torque recommendations and inspect periodically for wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own Honda or compatible wheels with a radius seat and need an OEM-style replacement that looks factory-correct but improves durability. This set suits DIY enthusiasts, mechanics, and anyone replacing lost or damaged lug nuts on models like the Honda Civic, Accord, HR-V, Element, and compatible Acura vehicles. Confirm thread pitch and seat type on your wheels before purchasing to ensure correct fitment. AUTOPTIM offers 12 months of customer support for questions before or after purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit tapered 60° seats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These AUTOPTIM lug nuts are designed for radius seats and will not fit 60° tapered or mag 90° seats.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size is required to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 3\/4\" (19 mm) hex socket. Torque to your vehicle manufacturer's specification.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67591064682681,"sku":"B0D99JKQDW","price":77.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-view-lug-nuts.jpg?v=1790540444"},{"product_id":"autoptim-1-2-20-spline-lug-nuts-23-piece-black-closed-end-set-with-socket-17mm-hex-triple-chrome","title":"AUTOPTIM 1\/2-20 Spline Lug Nuts — 23-Piece Black Closed-End Set with Socket, 17mm Hex, Triple Chrome","description":"\u003cstrong\u003eAUTOPTIM 1\/2-20 spline lug nuts are a 23-piece closed-end wheel nut set (including socket) engineered for a secure, rust-resistant fit on compatible Jeep models.\u003c\/strong\u003e\n\u003cp\u003eThis kit combines one-piece, cold-forged steel lug nuts finished in black with a dedicated socket so you can replace worn or mismatched nuts quickly. The nuts use a 1\/2\"-20 thread, a 60° tapered seat and a 17 mm hex profile, offering dependable engagement with factory-style wheels. Built to resist corrosion and cracking through heat treatment and triple chrome plating, this set aims to deliver long service life and consistent wheel clamping.\u003c\/p\u003e\n\n\u003ch3\u003eWill these nuts fit my Jeep and wheel type?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are designed to match common aftermarket and factory-style wheels on many Jeep models listed for fitment. Confirm your wheel uses a 1\/2\"-20 stud and a 60° tapered seat, and verify the 17 mm hex and 35 mm overall length work with your wheel's lug well. They are specified for popular Jeep builds but always double-check wheel specifications before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: 1\/2\"-20 (UNF)\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° tapered\u003c\/li\u003e\n  \u003cli\u003eHex: 17 mm for socket engagement\u003c\/li\u003e\n  \u003cli\u003eLength\/width: 35 mm length, 20 mm width\u003c\/li\u003e\n  \u003cli\u003eCommon fit examples: Wrangler (1987–2018), Liberty (2002–2012), Grand Cherokee (1993–2010), Cherokee (1984–2001)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these closed-end nuts?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are cold-forged from steel and undergo heat treatment to increase strength and toughness. A triple chrome plating finish adds a protective layer against road salt and moisture, while the closed-end design prevents debris and moisture from entering the stud area. Together these features reduce the risk of corrosion and extend usable life compared with basic plated nuts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: cold-forged steel with heat treatment\u003c\/li\u003e\n  \u003cli\u003eFinish: triple chrome plating for rust resistance\u003c\/li\u003e\n  \u003cli\u003eDesign: closed-end to keep out contaminants\u003c\/li\u003e\n  \u003cli\u003eOne-piece construction reduces failure points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose one-piece spline lug nuts over two-piece alternatives?\u003c\/h3\u003e\n\u003cp\u003eOne-piece lug nuts eliminate the separate sleeve or cap common to two-piece designs, reducing potential weakness at the joint. This simplified construction improves structural integrity under repeated torque cycles and lowers the chance of cracking or loosening. For owners prioritizing safety and longevity, one-piece nuts offer a more robust solution for wheel retention.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-piece build minimizes failure points\u003c\/li\u003e\n  \u003cli\u003eTighter thread engagement for consistent clamping\u003c\/li\u003e\n  \u003cli\u003eReduced maintenance compared with multi-part nuts\u003c\/li\u003e\n  \u003cli\u003eBetter resistance to cracking under stress\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe package contains 23 black closed-end spline lug nuts and a matching socket sized for the 17 mm hex. Installation follows the same procedure as standard lug nut replacement: hand-thread each nut to avoid cross-threading, then torque to your vehicle manufacturer’s specification with a calibrated torque wrench. The included socket helps you get started right away.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e23 closed-end lug nuts (black finish)\u003c\/li\u003e\n  \u003cli\u003e17 mm compatible socket included\u003c\/li\u003e\n  \u003cli\u003eRecommended: use a torque wrench and follow factory torque specs\u003c\/li\u003e\n  \u003cli\u003eHand-start each nut to prevent cross-threading\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? If you own compatible Jeep models or aftermarket wheels that require 1\/2\"-20 threaded, 60° tapered-seat lug nuts and you want a corrosion-resistant, one-piece closed-end solution, this AUTOPTIM set is made for you. It suits drivers replacing damaged or corroded lug nuts, owners upgrading to a uniform black appearance, or anyone who prefers a rugged, low-maintenance nut design. For professional or DIY wheel service, pair these nuts with a quality torque wrench and follow vehicle torque recommendations to ensure safe, even wheel clamping.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit all Jeep wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Jeep wheels that use 1\/2\"-20 studs with a 60° tapered seat; check your wheel's thread and seat specifications to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the included socket the correct size for these nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit includes a socket sized for the 17 mm hex profile to match these lug nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67591064879289,"sku":"B09ZY593FQ","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-packaging-black-lug-nuts.jpg?v=1790540444"},{"product_id":"autoptim-car-trunk-organizer-65l-collapsible-black-large-600d-oxford-velcro-base","title":"AUTOPTIM Car Trunk Organizer – 65L Collapsible Black Large, 600D Oxford, Velcro Base","description":"\u003cp\u003e\u003cstrong\u003eThe AUTOPTIM 65L Collapsible Car Trunk Organizer is a large, foldable storage solution that keeps groceries, tools and gear tidy while preventing shifting with a Velcro-secured base.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you run errands, commute with sports equipment or keep emergency supplies on hand, a reliable trunk organizer changes how your vehicle stays organized. The AUTOPTIM organizer combines roomy compartments, durable 600D Oxford polyester construction and a flexible folding design so you can adapt it to trunk, back seat or garage storage needs. Reinforced stitching and thoughtful anchoring ensure long-term use and items stay put during drives.\u003c\/p\u003e\n\n\u003ch3\u003eHow much storage does the AUTOPTIM organizer provide for daily errands?\u003c\/h3\u003e\n\n\u003cp\u003eThis model measures 23.6\" L × 14.6\" W × 10.6\" H and offers two main compartments plus multiple exterior pockets to separate items quickly. The generous 65L capacity is designed to handle groceries, a tool kit, sports gear or multiple smaller bags without crowding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo large compartments for bulky items or divided grocery storage\u003c\/li\u003e\n  \u003cli\u003eMultiple side pockets for bottles, napkins, small tools and accessories\u003c\/li\u003e\n  \u003cli\u003e65 liters total capacity—fits large grocery runs or medium luggage pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this trunk organizer for repeated use?\u003c\/h3\u003e\n\n\u003cp\u003eThe AUTOPTIM unit is built from 600D Oxford polyester with reinforced stitching at stress points so it endures regular loading and unloading. The material resists everyday wear and the sewn structure maintains shape even when filled with heavier items.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e600D Oxford polyester shell for tear and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eReinforced stitching where seams take the most strain\u003c\/li\u003e\n  \u003cli\u003eRigid internal panels preserve form under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I fold or store the organizer when it’s not in use?\u003c\/h3\u003e\n\n\u003cp\u003eYes—this organizer features Velcro panels on the sides that let you fold it flat or down the middle for compact storage. Quick folding makes it practical to carry into the house, stash beneath a seat or keep in a closet until needed again.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVelcro side fastenings for flat or half-folded storage\u003c\/li\u003e\n  \u003cli\u003eLightweight design for easy transport when empty\u003c\/li\u003e\n  \u003cli\u003eFolds small enough to store in trunks, closets, or under benches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill items shift or spill during driving?\u003c\/h3\u003e\n\n\u003cp\u003eThe bottom of the organizer has Velcro fastening to grip carpeted trunk surfaces and reduce movement while driving. Combined with rigid panels and separate compartments, the organizer helps keep groceries and tools upright and reduces agitation during turns or braking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVelcro base anchors organizer to many trunk carpets and liners\u003c\/li\u003e\n  \u003cli\u003eDivided compartments limit item-to-item contact and spills\u003c\/li\u003e\n  \u003cli\u003eStable base and reinforced sides prevent collapse when loaded\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The AUTOPTIM 65L Collapsible Car Trunk Organizer suits drivers who want a versatile, heavy-duty storage solution that adapts to shopping trips, sports practices, roadside kits and daily commuting. It’s especially useful for families managing grocery runs, DIYers carrying tools, and anyone who needs a tidy, non-slip trunk setup. Backed by a 12-month customer service promise, this organizer is aimed at buyers who value durable materials, practical folding, and secure placement during travel.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the organizer waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 600D Oxford polyester resists light moisture but is not fully waterproof; avoid prolonged exposure to heavy rain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it fit in small hatchback trunks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the folding sides let you reduce width or flatten it, making it workable for most hatchbacks and sedans.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67591089815737,"sku":"B0FPF3P1W6","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-view-large-black-trunk-organizer.jpg?v=1790541143"},{"product_id":"autoptim-m10x1-25-atv-lug-nuts-16pc-black-6-spline-closed-end-forged-60-taper","title":"AUTOPTIM M10x1.25 ATV Lug Nuts 16pc Black — 6-Spline Closed-End Forged, 60° Taper","description":"\u003cp\u003e\u003cstrong\u003eAUTOPTIM M10x1.25 ATV lug nuts are a 16-piece, closed-end black 6-spline set with a matching socket key, engineered as one-piece forged nuts for secure aftermarket wheel fitment on M10x1.25 studs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need reliable replacement lug nuts for ATVs, UTVs or utility bikes that use M10x1.25 studs, this AUTOPTIM kit supplies 16 solid conical nuts plus a dedicated 6-spline socket key. Each nut is heat-treated and cold-forged, finished in a black zinc coating to reduce corrosion, and sized to match common off-road wheels with a 60° tapered seat. The package is intended for aftermarket upgrades or direct replacements on many popular models that require a 17 mm hex engagement and a 35 mm overall length.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eThey fit wheels that accept M10 x 1.25mm studs and a 60° tapered seat; check your vehicle’s stud pitch and the seat angle before buying. Fitment covers a wide range of ATVs and UTVs but is not universal—confirm your stud size and wheel seat type first.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThread: M10 x 1.25 (10x1.25mm)\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° tapered\/conical\u003c\/li\u003e\n  \u003cli\u003eHex: 17 mm engagement\u003c\/li\u003e\n  \u003cli\u003eLength: 35 mm, overall width 20 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and rust-resistant are these nuts?\u003c\/h3\u003e\n\n\u003cp\u003eAUTOPTIM uses cold forging and heat treatment to strengthen the one-piece construction, and a black zinc finish to slow corrosion from wet and salty conditions. This combination improves resistance to cracking and extends service life compared with some two-piece designs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial: heat-treated forged steel\u003c\/li\u003e\n  \u003cli\u003eFinish: black zinc for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eDesign: one-piece construction to prevent separation\u003c\/li\u003e\n  \u003cli\u003eTesting: factory-checked for thread fit and strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how do I install them?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes 16 closed-end lug nuts and a 6-spline socket key sized to match the nut profile, making installation straightforward with a compatible torque wrench. Tighten to your vehicle manufacturer’s specified torque value and verify clearance between the wheel and nut body before finalizing fitment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eContents: 16 lug nuts + 1 6-spline socket key\u003c\/li\u003e\n  \u003cli\u003eInstallation: use the supplied socket and a torque wrench\u003c\/li\u003e\n  \u003cli\u003eTip: confirm proper torque and wheel clearance after mounting\u003c\/li\u003e\n  \u003cli\u003eCompatibility check: ensure stud pitch and seat type match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose one-piece nuts over two-piece designs?\u003c\/h3\u003e\n\n\u003cp\u003eOne-piece nuts eliminate the joint common in two-piece designs, cutting the chances of loosening or cracking under heavy use. That single-piece structure keeps the thread engagement tight and reduces potential failure points for tougher off-road conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGreater structural integrity under torque\u003c\/li\u003e\n  \u003cli\u003eReduced risk of component separation\u003c\/li\u003e\n  \u003cli\u003eConsistent thread engagement for safety\u003c\/li\u003e\n  \u003cli\u003eSimple service life advantages for demanding use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOPTIM M10x1.25 set is aimed at ATV and UTV owners and mechanics who need a robust aftermarket lug nut solution for vehicles with M10x1.25 studs—examples include many Honda Recon, FourTrax, Foreman, Rancher and TRX models, plus Can-Am, Arctic Cat and other off-road platforms—anyone seeking corrosion-resistant, single-piece lug nuts with the convenience of a matching socket key.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these nuts fit 12mm studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These are sized M10 x 1.25 (10x1.25mm) and will not fit 12mm studs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the socket included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit contains a matching 6-spline socket key for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67591149486265,"sku":"B0D1BGLRBK","price":62.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-packaging.jpg?v=1790542447"},{"product_id":"autoptim-m12x1-25-lug-nuts-20pc-chrome-flat-seat-oem-fit-one-piece-closed-end","title":"AUTOPTIM M12x1.25 Lug Nuts - 20pc Chrome Flat-Seat OEM Fit, One-Piece Closed-End","description":"\u003cp\u003e\u003cstrong\u003eAUTOPTIM M12x1.25 OEM lug nuts are a 20-piece, chrome-finished, one-piece replacement set engineered to fit Nissan and compatible OEM flat-seat wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are built for drivers who need direct OEM-style replacements with M12 x 1.25 threads and a flat 90° mag seat. Designed as closed-end, one-piece nuts with a chrome finish, they match many Nissan and Infiniti factory wheels that require a flat seating surface. The set includes 20 lug nuts sized for a 13\/16\" (21mm) hex, 1.47\" (37mm) height and 1.2\" (30mm) width to give a secure fit without adapting the wheel bore.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these lug nuts fit?\u003c\/h3\u003e\n\u003cp\u003eThese nuts are intended for wheels that use an OEM flat (mag) seat and an M12 x 1.25 thread pitch. They commonly replace factory hardware on many Nissan models and select Infiniti vehicles; compatibility depends on the wheel seat type and stud thread size.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: Nissan Altima (2002–2024), Maxima (1988–2023), Pathfinder (2012–2024), Rogue (2008–2023).\u003c\/li\u003e\n  \u003cli\u003eInfiniti examples: Q50 (2013–2024), G37 (2008–2015), QX60 (2014–2024), QX50 (2013–2024).\u003c\/li\u003e\n  \u003cli\u003eConfirm your wheel uses a flat 90° mag seat and M12x1.25 studs before purchasing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and secure are these nuts for regular driving?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOPTIM lug nuts use a cold-forged, heat-treated steel process and triple chrome plating to resist corrosion and cracking. A one-piece construction helps eliminate separation risks present in two-piece designs and maintains tight thread engagement for long-term use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial\/process: cold-forged steel with heat treatment for strength.\u003c\/li\u003e\n  \u003cli\u003eFinish: triple chrome plating for rust resistance and appearance.\u003c\/li\u003e\n  \u003cli\u003eDesign: closed-end, one-piece body reduces failure points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and installation specifics?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts measure 1.47\" (37mm) tall with a 13\/16\" (21mm) hex head and 1.2\" (30mm) width. They feature a closed-end body and flat 90° mag seat, so they only fit wheels designed for a flat seating surface — not conical seats or wheels with caps that require different hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: M12 x 1.25; verify your vehicle studs match.\u003c\/li\u003e\n  \u003cli\u003eHead size: 13\/16\" (21mm) hex wrench\/socket required.\u003c\/li\u003e\n  \u003cli\u003eSeat type: flat 90° mag seat — do not use on conical-seat wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and warranty come with the purchase?\u003c\/h3\u003e\n\u003cp\u003eAUTOPTIM backs these lug nuts with customer support and a 12-month service commitment. If you encounter fitment questions or product issues, the brand provides assistance before and after sale to help resolve problems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 20 lug nuts per set for full wheel replacement.\u003c\/li\u003e\n  \u003cli\u003eService: 12 months of customer support for fitment or product concerns.\u003c\/li\u003e\n  \u003cli\u003eTip: keep original nuts until you confirm fit and torque the replacement to manufacturer specs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 20-piece AUTOPTIM set suits owners of Nissan and compatible Infiniti models who require OEM-style flat-seat, closed-end lug nuts with M12x1.25 threads. Choose this set if you want a one-piece, chrome-finished replacement that prioritizes corrosion resistance and a tight, factory-like fit — but double-check your wheel’s seat type and stud thread before buying.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit conical seat wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These AUTOPTIM lug nuts have a flat 90° mag seat and will not fit conical-seat wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size is required to install these nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 13\/16\" (21mm) socket or wrench to install the AUTOPTIM M12x1.25 nuts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67591215874233,"sku":"B0D626DX7S","price":74.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-packaging-chrome-lug-nuts_cfdfd5da-19ed-4e33-8dfa-f8edb2a37259.jpg?v=1790544023"},{"product_id":"autoptim-m12x1-25-oem-lug-nuts-20pc-black-flat-seat-mag-style-closed-end-triple-chrome","title":"AUTOPTIM M12x1.25 OEM Lug Nuts 20pc Black Flat-Seat Mag Style — Closed-End, Triple-Chrome","description":"\u003cstrong\u003eAUTOPTIM M12x1.25 OEM lug nuts are a 20-piece set of closed-end, black, flat-seat mag-style nuts designed to replace factory hardware on compatible Nissan and Infiniti wheels.\u003c\/strong\u003e\n\n\u003cp\u003eThese lug nuts are engineered to match OEM flat-seat wheels that require an M12 x 1.25 thread pitch and a mag-style seating profile. Each nut is a single-piece, closed-end design finished in black triple-chrome for corrosion resistance and long-term appearance. Before ordering, verify your wheel uses a flat (90°) seat; these will not fit conical or tapered seats or wheels that require wheel caps.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lug nuts match factory specifications?\u003c\/h3\u003e\n\u003cp\u003eEach nut is made to precise dimensions to replace original equipment fasteners on many Nissan and Infiniti models. The 13\/16\" (21mm) hex size works with standard factory sockets, while the 1.47\" (37mm) overall height and 1.2\" (30mm) width maintain proper engagement and clearance on most OE wheels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM12 x 1.25 thread pitch for direct OEM replacement\u003c\/li\u003e\n  \u003cli\u003e13\/16\" (21mm) hex for standard lug tools\u003c\/li\u003e\n  \u003cli\u003e1.47\" (37mm) height ensures correct thread engagement\u003c\/li\u003e\n  \u003cli\u003eFlat 90° mag seat fits flat-seat OEM wheels only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lug nuts durable and safe for daily driving?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are manufactured from cold-forged steel and go through heat treatment to improve strength and fatigue resistance. A triple-chrome finish reduces corrosion, and the one-piece construction avoids the failure modes associated with two-piece converters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-forged, heat-treated steel for structural strength\u003c\/li\u003e\n  \u003cli\u003eOne-piece design reduces risk of cracking or separation\u003c\/li\u003e\n  \u003cli\u003eTriple chrome finish resists rust and maintains appearance\u003c\/li\u003e\n  \u003cli\u003eClosed-end design protects wheel studs from debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles will these lug nuts fit?\u003c\/h3\u003e\n\u003cp\u003eThis set is targeted at many Nissan and Infiniti models that ship with flat-seat wheels and use the M12 x 1.25 thread standard. Compatibility covers a wide year range, but always cross-check wheel seat type and thread pitch against your vehicle or existing lug nuts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits include Nissan Altima, Maxima, Rogue, Pathfinder\u003c\/li\u003e\n  \u003cli\u003eCompatible Infiniti models include Q50, G37, QX50, QX60\u003c\/li\u003e\n  \u003cli\u003eRefer to vehicle-specific documentation for final confirmation\u003c\/li\u003e\n  \u003cli\u003eNot compatible with conical\/tapered-seat wheels or wheel caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable changing wheels: remove the factory nuts, thread these by hand to start, then torque to the vehicle manufacturer’s spec using a torque wrench. Because they use a 13\/16\" hex, standard sockets or impact tools that fit that size will work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-thread first to avoid cross-threading\u003c\/li\u003e\n  \u003cli\u003eUse a torque wrench to final-torque to OEM specs\u003c\/li\u003e\n  \u003cli\u003e13\/16\" socket or impact tool required for tightening\u003c\/li\u003e\n  \u003cli\u003eClosed-end design keeps threads cleaner for easier reuse\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who need a direct, high-quality replacement for worn or missing factory lug nuts on compatible Nissan and Infiniti cars and SUVs. These AUTOPTIM lug nuts are best for owners who want OEM-style fitment, improved corrosion resistance, and a one-piece, closed-end construction. If your wheels use a tapered or conical seating angle, this set is not suitable—confirm your wheel seat type before purchasing. The package contains 20 nuts, enough for a full set on most vehicles plus a spare or two.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my Nissan Altima?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Altima uses M12 x 1.25 threads and flat (90°) mag-style seats, these will fit. Verify wheel seat type and thread pitch first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use an impact wrench to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, a compatible 13\/16\" socket can be used, but finish tightening with a torque wrench to manufacturer specs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67591216070841,"sku":"B0D61QGSL3","price":74.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-view-packed-lug-nuts.jpg?v=1790544023"},{"product_id":"autoptim-7-16-20-spline-lug-nuts-20pcs-chrome-closed-end-with-17mm-socket-triple-chrome-one-piece-strength","title":"AUTOPTIM 7\/16-20 Spline Lug Nuts 20pcs Chrome Closed-End with 17mm Socket — Triple Chrome, One-Piece Strength","description":"\u003cb\u003eAUTOPTIM 7\/16-20 spline lug nuts are a set of 20 chrome, closed-end, one-piece lug nuts with a matching socket designed for a secure, anti-rust wheel fit.\u003c\/b\u003e\n\nThese lug nuts are engineered for drivers who want a durable, corrosion-resistant wheel fastener that matches 7\/16-20 thread applications. Finished in triple chrome plating and produced by cold-forging and heat-treatment, the kit includes twenty conical-seat nuts and a dedicated socket so you can replace all fasteners on a single axle without hunting for tools.\n\n\u003ch3\u003eWill these lug nuts fit my vehicle with 7\/16-20 threads?\u003c\/h3\u003e\n\u003cp\u003eYes — these nuts are machined for a 7\/16-20 thread pitch and a 60° tapered conical seat, which is a common specification for lighter trucks, trailers, and some aftermarket wheels. Confirm your wheel stud size and seat angle before purchase to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: 7\/16-20 (verify against your studs)\u003c\/li\u003e\n  \u003cli\u003eSeat angle: 60° tapered conical seat\u003c\/li\u003e\n  \u003cli\u003eDimensions: 17 mm hex, 35 mm length, 20 mm face width\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and rust-resistant are these chrome lug nuts?\u003c\/h3\u003e\n\u003cp\u003eThe nuts use a triple-chrome finish over cold-forged, heat-treated steel, giving elevated resistance to corrosion and wear compared with untreated fasteners. The single-piece construction also reduces failure points common in two-piece designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-forged and heat-treated steel for strength\u003c\/li\u003e\n  \u003cli\u003eTriple chrome plating to resist rust and surface wear\u003c\/li\u003e\n  \u003cli\u003eClosed-end design keeps debris and moisture out of the threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these nuts easy to install and safe for driving?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: use the included socket for correct engagement with the 17 mm hex and torque to your vehicle manufacturer’s specification. The one-piece construction and precision-thread fit reduce the risk of loosening or cracking during normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes a matched socket for secure installation\u003c\/li\u003e\n  \u003cli\u003eOne-piece design reduces cracking risk compared to two-piece nuts\u003c\/li\u003e\n  \u003cli\u003ePrecision-thread fit ensures a tight connection to the stud\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the kit include and how do I maintain them?\u003c\/h3\u003e\n\u003cp\u003eThe package contains 20 closed-end lug nuts and a single socket sized for the nuts’ 17 mm hex. Routine maintenance is minimal — clean and inspect the nuts and studs after harsh winter or off-road use, and re-torque to spec after the first 50–100 miles post-installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20 chrome closed-end lug nuts (one-piece)\u003c\/li\u003e\n  \u003cli\u003e17 mm socket included for installation\u003c\/li\u003e\n  \u003cli\u003eRecommended: inspect, clean, and re-torque after initial installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThis AUTOPTIM kit suits vehicle owners who need a full replacement set of lug nuts with a 7\/16-20 thread size — especially those seeking a polished chrome look, stronger one-piece construction, and improved corrosion resistance. It’s a practical choice for light-truck or trailer owners, DIY mechanics refreshing wheels, and anyone who wants matched fasteners and a socket in a single purchase. AUTOPTIM offers 12 months of customer support should you have fitment or product questions.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit 7\/16-20 wheel studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are machined for 7\/16-20 threads; verify your vehicle studs and seat angle before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the socket included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, a 17 mm socket is included to install the closed-end nuts supplied in the 20-piece set.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67591281017017,"sku":"B0FPF8W4B4","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-view-packaging_831ae2e1-8f0a-4bef-8175-b58415e42bbe.jpg?v=1790546003"},{"product_id":"autoptim-m10x1-25-atv-lug-nuts-16-pc-chrome-open-end-17mm-hex-60-seat","title":"AUTOPTIM M10x1.25 ATV Lug Nuts - 16 Pc Chrome Open-End, 17mm Hex \u0026 60° Seat","description":"\u003cp\u003e\u003cstrong\u003eAUTOPTIM M10x1.25 open-end chrome lug nuts are a 16-piece, cold-forged set engineered to fit many ATV wheels with a 60° seat for reliable fastening and corrosion resistance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are made for riders who need a durable, corrosion-resistant fastener solution for ATVs like Can-Am, Polaris, Honda and Kawasaki models. Cold-forged and heat-treated steel with a triple chrome finish gives a balance of strength and appearance, while the open-end design allows use with extended studs. The pack includes 16 M10x1.25 nuts sized for a 17 mm hex, offering straightforward replacement or upgrade in one purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my ATV wheel?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility depends on stud thread and seat angle: these are M10x1.25 threads with a 60° conical seat, common on many ATVs. Confirm your wheel studs match the M10x1.25 pitch and use a 60° seat; this ensures correct contact and clamping. If your vehicle uses larger threads or a different seat style, choose a matching nut instead.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThread size: M10 x 1.25 (metric fine)\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° conical\u003c\/li\u003e\n  \u003cli\u003eHex: 17 mm (0.62\") wrench size\u003c\/li\u003e\n  \u003cli\u003eTypical fit: Can-Am, Polaris Sportsman, Honda TRX, Kawasaki KAF\/KVF models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and rust-resistant are these lug nuts?\u003c\/h3\u003e\n\n\u003cp\u003eThese nuts are cold-forged and heat-treated for improved tensile strength and fatigue resistance. A triple chrome plating enhances corrosion protection and surface hardness; AUTOPTIM also performs a 72-hour salt-spray test during production to validate anti-corrosion performance. For routine off-road usage and exposure to moisture, the finish helps extend service life compared with uncoated steel.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eManufacturing: cold-forged, heat-treated steel\u003c\/li\u003e\n  \u003cli\u003eFinish: triple chrome plating for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eQuality check: 72-hour salt-spray trial simulated\u003c\/li\u003e\n  \u003cli\u003eBenefit: longer service life and reduced rusting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the open-end style mean and why choose it?\u003c\/h3\u003e\n\n\u003cp\u003eOpen-end lug nuts are hollow at the back to clear longer wheel studs or aftermarket spacers, allowing full stud engagement and proper clamping. The one-piece design reduces the number of components to manage and simplifies installation. This style is particularly useful when you have extended studs or want a tight fit without trimming studs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesign: one-piece open-end construction\u003c\/li\u003e\n  \u003cli\u003eUse case: compatible with extended studs and spacers\u003c\/li\u003e\n  \u003cli\u003eInstallation: allows full stud thread engagement\u003c\/li\u003e\n  \u003cli\u003eAdvantage: saves time and reduces parts complexity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and hardware details should I expect in the pack?\u003c\/h3\u003e\n\n\u003cp\u003eThe set contains sixteen M10x1.25 lug nuts sized for a 17 mm hex key, with overall dimensions suited for most ATV wheel wells. Overall height and width are compact to fit tight wheel pockets while providing sufficient thread length for secure torque. AUTOPTIM includes customer support for questions before or after purchase.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eQuantity: 16 lug nuts per pack\u003c\/li\u003e\n  \u003cli\u003eOverall height: approximately 15.7 mm (0.62\")\u003c\/li\u003e\n  \u003cli\u003eWidth: about 20 mm (0.8\")\u003c\/li\u003e\n  \u003cli\u003eHex drive: 17 mm wrench compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and DIY mechanics who own ATVs or side-by-sides that require M10x1.25 threads and a 60° seat, and who want a corrosion-resistant, open-end lug nut option in a full 16-piece set. Ideal for owners replacing worn hardware, fitting aftermarket wheels with extended studs, or upgrading from lower-grade nuts for improved durability and appearance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit Polaris Sportsman wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit if your Polaris studs are M10x1.25 with a 60° seat—confirm thread and seat before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these with extended wheel studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The open-end design clears extended studs and allows full thread engagement for secure fastening.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67591920484537,"sku":"B0D9N3XB79","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-view-lugnuts-package.jpg?v=1790560088"},{"product_id":"autoptim-1-2-20-lug-nuts-20-pc-chrome-60-tapered-closed-end-scm435-steel","title":"AUTOPTIM 1\/2-20 Lug Nuts 20 Pc Chrome — 60° Tapered Closed-End, SCM435 Steel","description":"\u003cp\u003e\u003cstrong\u003eAUTOPTIM 1\/2-20 chrome closed-end lug nuts are a 20-piece aftermarket replacement set designed to fit many Ford wheels that accept 1\/2-20, 60° tapered-seat lug nuts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese lug nuts are crafted as one-piece, cold-forged SCM435 steel with a triple chrome finish for corrosion resistance and long service life. Each nut measures 1.38\" (35 mm) long, 0.87\" (22 mm) wide, and uses a 3\/4\" (19 mm) hex fitting. They are intended as aftermarket replacements for a long list of Ford vehicles that use a 60° tapered seat, including many Mustangs, Rangers, Explorers, F-series models and more. These are closed-end nuts, which protect threads from dirt and moisture and provide a clean appearance on chrome or painted wheels.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Ford wheels?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on two main factors: thread size and seat type. These AUTOPTIM nuts are 1\/2-20 thread with a 60° tapered (conical) seat; they fit wheels and studs designed for that specification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: 1\/2-20 (coarse)\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° tapered (conical) – not for flat, ball, radius, or 90° mag seats\u003c\/li\u003e\n  \u003cli\u003eHardware: 3\/4\" (19 mm) hex drive required for installation\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle manual or wheel spec to confirm seat and thread match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and rust-resistant are these closed-end lug nuts?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are cold-forged from SCM435 steel and heat treated to improve strength and reduce cracking. The triple chrome plating adds a protective layer to resist rust and keep a polished look longer under road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: SCM435 cold-forged steel for high tensile strength\u003c\/li\u003e\n  \u003cli\u003eFinish: triple chrome plating for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eDesign: one-piece construction reduces risk of separation or cracking\u003c\/li\u003e\n  \u003cli\u003eClosed-end: shields stud threads from moisture and contaminants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and torque these lug nuts correctly?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward but requires correct torque and sequence to ensure wheel safety. Use a 3\/4\" (19 mm) socket and follow a crisscross tightening pattern; then torque to your vehicle manufacturer's specified value with a calibrated torque wrench.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a 3\/4\" (19 mm) socket for tightening and removal\u003c\/li\u003e\n  \u003cli\u003eHand-start each nut to avoid cross-threading\u003c\/li\u003e\n  \u003cli\u003eTighten in a star\/crisscross pattern, then torque to factory spec\u003c\/li\u003e\n  \u003cli\u003eRecheck torque after 50–100 miles or per vehicle recommendation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these original equipment or aftermarket parts?\u003c\/h3\u003e\n\u003cp\u003eThese are aftermarket replacement lug nuts, engineered to match common Ford wheel specifications but not guaranteed to be OEM. They are not suitable for some factory wheels that require specialized seat types like 90° mag or ball\/radius seats.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAftermarket design — built for many Ford models with 60° taper seats\u003c\/li\u003e\n  \u003cli\u003eNot recommended for factory wheels with non-tapered or specialty seats\u003c\/li\u003e\n  \u003cli\u003eSold as a 20-piece set to replace all wheel studs on most passenger vehicles\u003c\/li\u003e\n  \u003cli\u003eIncludes 12-month customer support from AUTOPTIM for fit or service questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 20-pack of AUTOPTIM 1\/2-20 chrome closed-end lug nuts is aimed at owners of Ford vehicles and aftermarket wheels that require a 1\/2-20 thread and 60° tapered seat—people replacing lost or damaged lug nuts, upgrading to a uniform chrome look, or maintaining wheels on Mustangs, Rangers, Explorers, E-series vans and similar models. If your wheels specify a 60° conical seat and you need durable, rust-resistant, one-piece nuts with a closed end, this set offers a practical, cost-effective replacement option. Always confirm thread and seat compatibility before purchase and use a torque wrench to install to manufacturer torque specs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit factory Ford wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Ford wheels that use 1\/2-20 threads with a 60° tapered seat. Not suitable for flat, ball, radius, or 90° mag seat factory wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size do I need to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 3\/4\" (19 mm) socket. Always torque to your vehicle manufacturer's specified value.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67592113488057,"sku":"B0FPF7BJJJ","price":69.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-packaging-chrome-lug-nuts_4185a7b9-e5b5-4a36-bee5-58b295840d83.jpg?v=1790561742"},{"product_id":"autoptim-m12x1-5-lug-nuts-20pc-chrome-closed-end-3-4-hex-60-tapered-one-piece","title":"AUTOPTIM M12x1.5 Lug Nuts 20pc Chrome Closed-End 3\/4\" Hex 60° Tapered One-Piece","description":"\u003cp\u003e\u003cstrong\u003eAUTOPTIM M12x1.5 lug nuts are a set of 20 chrome, closed-end, one-piece wheel nuts designed for M12 x 1.5 threaded studs with a 3\/4\" (19 mm) hex head for aftermarket 5-lug wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts combine a durable, cold-forged steel construction with a polished chrome finish and a tapered 60° seat to offer a secure, corrosion-resistant fastening solution for many common aftermarket wheels. They’re built as solid one-piece units to reduce the risk of cracking and maintain stable torque clamping over time. Note that these are aftermarket taper-seat lug nuts and may not fit factory wheels with non-taper seats (90° mag\/flat\/ball\/radius).\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my vehicle and wheels?\u003c\/h3\u003e\n\u003cp\u003eThey are sized for M12 x 1.5 threaded studs and suit most 5-lug aftermarket wheels that accept a 60° tapered seat. Fitment examples include many Ford, Honda, Mazda, Chevy and Jeep models noted in the product specifications. Always confirm your wheel seat type and thread pitch before ordering to avoid mismatch.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: M12 x 1.5\u003c\/li\u003e\n  \u003cli\u003eHex size: 3\/4\" (19 mm)\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° tapered (not compatible with 90° mag\/flat\/ball\/radius seats)\u003c\/li\u003e\n  \u003cli\u003eLength and width: 1.38\" (35 mm) length, 0.87\" (22 mm) width\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these chrome lug nuts?\u003c\/h3\u003e\n\u003cp\u003eThese nuts are cold-forged and heat-treated to improve strength, then finished with a triple chrome plating that resists rust and abrasion. The solid single-piece design reduces the likelihood of separation or cracking compared with two-piece options, helping maintain secure fastening under normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: heat-treated cold-forged steel\u003c\/li\u003e\n  \u003cli\u003eFinish: triple-layer chrome plating for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eConstruction: one-piece, reduces failure points\u003c\/li\u003e\n  \u003cli\u003eSuitable for regular road use; periodic inspection recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and torque specs do I need to install them properly?\u003c\/h3\u003e\n\u003cp\u003eUse a 3\/4\" (19 mm) socket for installation. Torque values depend on your vehicle and wheel manufacturer recommendations; follow your vehicle’s wheel torque spec rather than a generic number. Tighten in a star pattern and recheck torque after the first 50–100 miles of driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSocket: 3\/4\" (19 mm) deep or shallow socket\u003c\/li\u003e\n  \u003cli\u003eMethod: tighten in star\/crisscross pattern\u003c\/li\u003e\n  \u003cli\u003eTorque: use vehicle\/wheel manufacturer specification\u003c\/li\u003e\n  \u003cli\u003ePost-install: re-torque after 50–100 miles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These AUTOPTIM M12x1.5 closed-end lug nuts are intended for drivers with 5-lug aftermarket wheels that require an M12 x 1.5, 60° tapered-seat nut. They suit owners who prioritize a strong, corrosion-resistant one-piece nut for everyday driving and light-duty use, including replacements for common compact and midsize sedans, crossovers and compact SUVs listed in the fitment notes. If you are unsure about seat angle or thread pitch, check your wheel specifications or consult a wheel installer before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with factory wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed for aftermarket wheels with a 60° tapered seat; not suitable for factory wheels using 90° mag\/flat\/ball\/radius seats.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size do I need to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 3\/4\" (19 mm) socket and follow your vehicle’s specified torque values, retorquing after 50–100 miles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67592113520825,"sku":"B09ZX4GLN5","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-view-packaged-lug-nuts_f7f80e27-e989-4882-babb-2ea6140cbe3a.jpg?v=1790561741"},{"product_id":"autoptim-m12x1-5-atv-lug-nuts-16-pc-black-closed-end-3-4-19mm-hex-60-tapered-seat","title":"AUTOPTIM M12x1.5 ATV Lug Nuts — 16-Pc Black Closed-End, 3\/4\" (19mm) Hex, 60° Tapered Seat","description":"\u003cstrong\u003eAUTOPTIM M12x1.5 ATV lug nuts are a 16-piece set of black, closed-end, one-piece conical nuts engineered for secure wheel attachment on compatible ATVs and UTVs.\u003c\/strong\u003e\n\n\u003cp\u003eThese lug nuts combine a standard M12x1.5 thread with a 3\/4\" (19mm) hex drive and a 60° tapered seat to replace factory wheel fasteners on many side-by-sides and utility vehicles. Cold-forged, heat-treated steel with a black zinc finish helps resist corrosion while the closed-end, one-piece construction reduces the risk of cracking and loosening in rough-use conditions. The kit includes 16 nuts sized 35mm long and 22mm across the base to match OEM seating dimensions.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my ATV or UTV?\u003c\/h3\u003e\n\u003cp\u003eThese AUTOPTIM lug nuts fit vehicles that use an M12x1.5 thread and a 60° tapered seat. They are commonly used as replacements for several Polaris and Honda models, but you should confirm thread pitch and seat type before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: M12 x 1.5\u003c\/li\u003e\n  \u003cli\u003eDrive size: 3\/4\" (19mm) hex\u003c\/li\u003e\n  \u003cli\u003eSeat angle: 60° tapered\/conical\u003c\/li\u003e\n  \u003cli\u003eLength x base width: 35mm long, 22mm base\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and rust-resistant are these nuts for off-road use?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are cold-forged and then heat-treated to increase strength and resistance to cracking under high torque or impact. A black zinc finish adds corrosion resistance for wet and muddy conditions, extending service life compared with untreated steel hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: heat-treated alloy steel\u003c\/li\u003e\n  \u003cli\u003eFinish: black zinc coating for corrosion protection\u003c\/li\u003e\n  \u003cli\u003eConstruction: solid one-piece design to prevent separation\u003c\/li\u003e\n  \u003cli\u003eLaboratory-tested for fit and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose closed-end, one-piece lug nuts over two-piece designs?\u003c\/h3\u003e\n\u003cp\u003eClosed-end, one-piece lug nuts fully encapsulate the stud end to keep out dirt, moisture, and debris that can accelerate corrosion or cause uneven seating. One-piece construction eliminates a joint that might loosen or crack in two-piece models, improving long-term reliability and maintaining a consistent clamp force.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed end blocks contaminants and water\u003c\/li\u003e\n  \u003cli\u003eOne-piece body removes potential failure point\u003c\/li\u003e\n  \u003cli\u003eConsistent thread engagement reduces loosening risk\u003c\/li\u003e\n  \u003cli\u003eIdeal for high-vibration off-road environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and torque specs do I need to install them correctly?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts use a 3\/4\" (19mm) hex, so a properly sized socket and a calibrated torque wrench are required for safe installation. Always follow vehicle manufacturer torque recommendations to avoid overstressing studs or under-torquing fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSocket size: 3\/4\" (19mm) impact or hand socket\u003c\/li\u003e\n  \u003cli\u003eUse a torque wrench for final tightening\u003c\/li\u003e\n  \u003cli\u003eFollow your vehicle's recommended torque spec\u003c\/li\u003e\n  \u003cli\u003eRe-check torque after initial road\/off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOPTIM M12x1.5 16-piece lug nut set is made for ATV and UTV owners, mechanics, and fleet managers who need reliable, sealed wheel fasteners that match M12x1.5 threaded studs and a 60° tapered seat. It's a practical upgrade for riders who encounter mud, water, or heavy vibration and want a durable, one-piece replacement that resists corrosion. Confirm thread pitch and seat angle against your vehicle’s specs before purchasing; if your machine lists M12x1.5 and a 60° seat, this set provides a direct-fit, long-lasting solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit Polaris Ranger models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — compatible with several Polaris models including Ranger XP 900 (2013+) and Ranger 1000 (2017+). Confirm M12x1.5 thread and 60° seat first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these nuts rust-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They have a black zinc finish and are heat-treated to resist rust and cracking in wet conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67592613134521,"sku":"B0D1BG5JXD","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-packaging-lug-nuts_6b3cc804-d411-42de-aabf-6d4fbbc81158.jpg?v=1790566278"},{"product_id":"autoptim-m14x1-5-lug-nuts-20-pack-chrome-open-end-60-conical-seat-3-4-hex","title":"AUTOPTIM M14x1.5 Lug Nuts 20-Pack — Chrome Open-End, 60° Conical Seat, 3\/4\" Hex","description":"\u003cp\u003e\u003cstrong\u003eThese are AUTOPTIM M14x1.5 open-end chrome lug nuts — 20 precision-made conical-seat nuts designed to replace factory lug hardware on compatible vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a reliable set of aftermarket lug nuts that mirror OEM fit and finish for many modern American and import models, this AUTOPTIM 20-piece pack offers cold-forged, triple-chrome plated nuts with a 60° conical (tapered) seat. They measure M14x1.5 thread pitch, accept a 3\/4\" (19 mm) hex socket, and have been through corrosion and strength testing to provide long-term service on road vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lug nuts match my vehicle’s wheel fitment?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOPTIM M14x1.5 size fits wheels that use metric 14 mm diameter studs with 1.5 mm thread pitch and a 60° conical seat. Many late-model GM, Chrysler and Dodge wheels use this configuration, so they serve as a direct aftermarket replacement on those hubs when the wheel seat specification matches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM14x1.5 thread pitch — standard metric sizing for many cars and crossovers\u003c\/li\u003e\n  \u003cli\u003e60° conical seat — matches tapered-well wheels that rely on the seat for centering\u003c\/li\u003e\n  \u003cli\u003e3\/4\" (19 mm) hex — fits common lug sockets and impact tools\u003c\/li\u003e\n  \u003cli\u003e0.84\" (21 mm) height and 0.9\" (23 mm) width — low-profile open end design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lug nuts durable and corrosion-resistant?\u003c\/h3\u003e\n\u003cp\u003eAUTOPTIM lug nuts are cold-forged, heat-treated, and triple-chrome plated to resist rust and cracking under normal road conditions. They completed an in-house 72-hour salt-spray protocol intended to simulate several years of exposure and help maintain appearance and function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-forged and heat-treated steel for strength and fatigue resistance\u003c\/li\u003e\n  \u003cli\u003eTriple chrome plating for improved rust protection and glossy finish\u003c\/li\u003e\n  \u003cli\u003e72-hour salt spray testing as a corrosion-resistance benchmark\u003c\/li\u003e\n  \u003cli\u003eOpen-end design allows access to extended studs and aftermarket wheel bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical features should I expect during installation and use?\u003c\/h3\u003e\n\u003cp\u003eThe open-end construction lets these nuts fit over longer wheel studs and accommodate some aftermarket extensions, while the standard hex size keeps installation straightforward with common wrenches and impact sockets. Their precision threads are finished to help ensure a secure, tight fit without cross-threading when torqued to spec.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOpen-end one-piece design for compatibility with extended studs\u003c\/li\u003e\n  \u003cli\u003ePrecision-processed threads to reduce cross-thread risk and ensure proper torque seating\u003c\/li\u003e\n  \u003cli\u003ePack of 20 — covers five wheels with four nuts each or provides spares\u003c\/li\u003e\n  \u003cli\u003eCompact height works with many wheel designs and center caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a vehicle that specifies M14x1.5 lug hardware with a 60° conical seat — for example certain Chevy Camaros (2010+), Equinox (2010–2017), Chrysler 300\/300C models (2004+), Dodge Chargers (2005+), Dodge Durango (2011+) and similar fitments — these AUTOPTIM nuts are a practical aftermarket option. They're suited to DIY mechanics, professional installers, and fleet maintenance teams who need an economical, corrosion-tested replacement set with a chrome finish. They are not a wheel lock solution; if you require anti-theft locking nuts, consider a dedicated locking set matched to your wheel specifications.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these lug nuts fit my 2012 Chevy Camaro?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your Camaro uses M14x1.5 studs with a 60° conical seat, these AUTOPTIM nuts are a compatible aftermarket replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use an impact wrench with these nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 3\/4\" (19 mm) hex is compatible with standard impact sockets, but always torque to manufacturer specifications after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67594199990457,"sku":"B0D9N1NCHX","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-view-packed-lug-nuts_b8a333d5-a863-47ce-a3ae-bca0bd8dbf6f.jpg?v=1790582285"},{"product_id":"autoptim-m12x1-25-open-end-lug-nuts-20pc-chrome-60-conical-seat-3-4-hex","title":"AUTOPTIM M12x1.25 Open-End Lug Nuts 20pc Chrome — 60° Conical Seat, 3\/4\" Hex","description":"\u003cp\u003e\u003cstrong\u003eAUTOPTIM M12x1.25 open end lug nuts are a 20-piece chrome, conical-seat replacement set engineered for reliable wheel fitment across many Nissan, Subaru and select Suzuki models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 20-piece set of M12x1.25 lug nuts by AUTOPTIM offers a one-piece, open-end design finished in triple chrome plating. Built from cold-forged, heat-treated steel and tested with a 72-hour salt-spray trial, these nuts are sized for a 60° conical seat and use a 3\/4\" (19mm) hex drive. They are intended as aftermarket wheel fasteners where the OEM thread and seat specification match, providing a durable, corrosion-resistant option for daily drivers and enthusiast vehicles alike.\u003c\/p\u003e\n\n\u003ch3\u003eWhich cars will these lug nuts fit?\u003c\/h3\u003e\n\u003cp\u003eThese AUTOPTIM lug nuts are specified for M12x1.25 threads with a 60° conical seat, which matches many Nissan, Subaru and a few Suzuki applications. Fitment depends on hub stud size, seat type and clearance for a 0.84\" (21mm) nut height; always compare dimensions with your OEM parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNissan: 300ZX, 240SX, 350Z, 370Z, Sentra, LEAF, Altima, GT-R, Maxima (various years noted).\u003c\/li\u003e\n  \u003cli\u003eSubaru: BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, WRX, WRX STI and others listed.\u003c\/li\u003e\n  \u003cli\u003eSome Suzuki models such as Kizashi when M12x1.25 is specified.\u003c\/li\u003e\n  \u003cli\u003eConfirm stud thread pitch, seat angle and wheel clearance before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these lug nuts?\u003c\/h3\u003e\n\u003cp\u003eAUTOPTIM manufactures these lug nuts with cold-forging and heat treatment, then applies a triple-chrome finish to resist wear and rust. The set undergoes a 72-hour salt-spray test that simulates long-term exposure to corrosive environments, helping ensure consistent performance in everyday conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-forged steel core for increased strength and crack resistance.\u003c\/li\u003e\n  \u003cli\u003eTriple chrome plating for enhanced corrosion protection and shine.\u003c\/li\u003e\n  \u003cli\u003e72-hour salt-spray trial approximates multi-year environmental exposure.\u003c\/li\u003e\n  \u003cli\u003eOpen-end design allows use with longer wheel studs or locking lug nuts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key dimensions and installation notes?\u003c\/h3\u003e\n\u003cp\u003eEach nut uses an M12x1.25 thread, 60° conical seat, 3\/4\" (19mm) hex, with an overall height of 0.84\" (21mm) and a width of 0.9\" (23mm). Because these are open-end lug nuts, they accommodate extended studs and allow the use of locking lug nuts with internal shanks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: M12x1.25 — verify against vehicle stud pitch.\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° conical — must match wheel seat geometry for safe clamping.\u003c\/li\u003e\n  \u003cli\u003eDrive: 3\/4\" (19mm) hex — use a properly sized socket or torque wrench.\u003c\/li\u003e\n  \u003cli\u003eHeight \u0026amp; width: 0.84\" (21mm) height, 0.9\" (23mm) width — check wheel clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these lug nuts require any special maintenance or service?\u003c\/h3\u003e\n\u003cp\u003eRoutine inspection and correct torqueing are the main maintenance points for any wheel fastener. AUTOPTIM provides 12 months of customer support if you encounter fitment questions or post-purchase issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect for corrosion or damage during regular wheel service intervals.\u003c\/li\u003e\n  \u003cli\u003eUse a calibrated torque wrench and the vehicle manufacturer’s torque specification.\u003c\/li\u003e\n  \u003cli\u003eReplace any lug nut that shows cracking, stripped threads, or severe plating loss.\u003c\/li\u003e\n  \u003cli\u003eContact AUTOPTIM customer service within 12 months for assistance if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOPTIM M12x1.25 20-piece open end lug nut set is suited to car owners and mechanics who need compatible aftermarket fasteners for Nissan, Subaru and select Suzuki models that use an M12x1.25, 60° conical seat. It’s a practical choice for drivers seeking a corrosion-tested, chrome-finished nut set that accepts extended studs or locking lug accessories. Always confirm thread pitch, seat type and clearance before purchase to ensure a safe match for your wheels and vehicle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts the right thread size for my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These are M12x1.25 threads with a 60° conical seat—verify your vehicle’s stud pitch and seat type before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these with wheel locks or extended studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—open-end design accommodates extended studs and compatible locking lug nuts; confirm internal clearance first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67595562418361,"sku":"B0D9N49TW7","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-packaging-lug-nuts_2f7d4d7e-a4c4-4590-a6f3-c69987761dbd.jpg?v=1790589656"},{"product_id":"autoptim-m14x1-5-open-end-lug-nuts-24-pc-chrome-60-conical-seat-triple-chrome-corrosion-resistance","title":"AUTOPTIM M14x1.5 Open-End Lug Nuts 24-Pc Chrome — 60° Conical Seat, Triple Chrome Corrosion Resistance","description":"\u003cp\u003e\u003cstrong\u003eA 24-piece set of AUTOPTIM M14x1.5 open-end, 60° conical-seat lug nuts finished in triple chrome for corrosion resistance and OEM-compatible fitment on many trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are designed for drivers who need durable, precision-threaded hardware that matches factory wheel seats and provides long-term protection against rust. Each nut is cold-forged, heat-treated, and plated with triple chrome following an in-house 72-hour salt-spray test to simulate extended corrosion resistance. The open-end construction preserves wheel stud length and works with anti-theft or longer studs while providing a secure 3\/4\" (19 mm) hex engagement for installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill these AUTOPTIM lug nuts fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThey are manufactured with an M14x1.5 thread pitch and a 60° conical seat, suitable for many North American trucks and SUVs. Fitment covers a broad range of model years commonly using this thread standard, but always verify your wheel seat and thread pitch before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: M14 x 1.5\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical (tapered)\u003c\/li\u003e\n  \u003cli\u003eCommon compatible models: Chevy Silverado, GMC Sierra, Ford F-150, Ram 1500, Nissan Armada\/Titan XD, Yukon, Tahoe, Suburban\u003c\/li\u003e\n  \u003cli\u003ePack size: 24 lug nuts—enough for six wheels with spare or a full set of four wheels plus spares\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these lug nuts?\u003c\/h3\u003e\n\u003cp\u003eManufactured using cold-forging and heat-treatment processes, these nuts are built to resist cracking and deformation under normal driving conditions. The triple chrome finish and a 72-hour salt-spray qualification in-house aim to reduce surface corrosion and extend service life compared with unplated hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial\/process: cold-forged, heat-treated steel for strength\u003c\/li\u003e\n  \u003cli\u003eFinish: triple chrome plating for long-term rust resistance\u003c\/li\u003e\n  \u003cli\u003eCorrosion test: in-house 72-hour salt-spray simulation\u003c\/li\u003e\n  \u003cli\u003eAnti-crack treatment to maintain thread integrity over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical dimensions and installation details?\u003c\/h3\u003e\n\u003cp\u003eEach lug nut uses a 3\/4\" (19 mm) hex head for tightening and has overall compact dimensions suitable for many wheel designs. The open-end style permits use with extended studs and helps ensure full thread engagement on the stud for a secure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHex size: 3\/4\" (19 mm)\u003c\/li\u003e\n  \u003cli\u003eOverall height: 0.83\" (21 mm)\u003c\/li\u003e\n  \u003cli\u003eWidth: 0.9\" (23 mm)\u003c\/li\u003e\n  \u003cli\u003eOpen-end design retains stud length and works with anti-theft adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I rely on these for daily driving and wheel maintenance?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are intended for aftermarket use where OEM-compatible fit and corrosion resistance are desired. They provide a reliable clamping surface when installed and torqued to the wheel manufacturer or vehicle maker's specified values, but always follow proper torque and maintenance guidelines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a calibrated torque wrench—follow vehicle specifications\u003c\/li\u003e\n  \u003cli\u003eInspect threads for damage before installation\u003c\/li\u003e\n  \u003cli\u003eReplace any damaged or heavily corroded lug nuts immediately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AUTOPTIM M14x1.5 24-piece chrome conical-seat lug nut set is aimed at truck and SUV owners, mechanics, and DIY enthusiasts who need a full-pack replacement or spare supply that matches common M14x1.5 wheel fittings. It's a practical choice for fleets, seasonal wheel swaps, or anyone upgrading wheels who wants a strong, corrosion-resistant open-end nut that preserves stud length and accepts anti-theft accessories. If you are unsure about compatibility, compare the thread pitch and seat angle on your existing lug nuts or consult a professional before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit my Silverado or Sierra?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Chevy Silverado and GMC Sierra models using M14x1.5 threads and a 60° seat; confirm your wheel's thread and seat type first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these with extended wheel studs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the open-end design preserves stud length and works with longer or aftermarket studs and anti-theft adapters.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOPTIM","offers":[{"title":"Default Title","offer_id":67595562549433,"sku":"B0D9N47N54","price":53.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autoptim-front-packaging-lug-nuts_e8986325-318e-4a5e-97b4-0d90b93d484f.jpg?v=1790589647"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/autoptim-front-packaging-lug-nuts_e8986325-318e-4a5e-97b4-0d90b93d484f.jpg?v=1790612704","url":"https:\/\/redleafauto.ca\/collections\/autoptim.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}