{"title":"Battery Tender","description":"\u003cp\u003eBrowse 32 Battery Tender products at RedLeaf Auto, including battery chargers \u0026amp; maintainers, batteries \u0026amp; battery accessories and motorcycle \u0026amp; atv accessories. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"battery-tender-sae-extension-cables-25-ft-4-pack-25-foot-quick-disconnect-leads-for-chargers-outdoor-workshop-reach","title":"Battery Tender SAE Extension Cables 25 ft 4-Pack — 25-Foot Quick-Disconnect Leads for Chargers, Outdoor\/Workshop Reach","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender 25-foot SAE extension cables (pack of 4) lengthen charger reach so you can leave a Battery Tender charger in a dry, convenient spot while charging batteries up to 25 feet away.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need more distance between your Battery Tender charger and the vehicle battery—whether the charger must stay indoors, on a workbench, or out of the weather—these 25-foot SAE quick-disconnect extension leads add flexibility. Sold as a four-cable set, they work with many Battery Tender models that use the standard quick-connect plug system, making multi-vehicle or hard-to-reach battery charging simpler.\u003c\/p\u003e\n\n\u003ch3\u003eWill these extensions fit my Battery Tender charger?\u003c\/h3\u003e\n\n\u003cp\u003eThey are compatible with Battery Tender chargers that use the black SAE quick-disconnect plugs, including many Junior, Plus, and multi-bank units. They are not intended for Battery Tender products with white quick-disconnect plugs or units that require hard-wired clips.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorks with: Junior, Plus, 2-Bank, 4-Bank, 5-Bank, 10-Bank models using black SAE plugs.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with: 6-volt Battery Tender Plus models and chargers using white quick-disconnects.\u003c\/li\u003e\n  \u003cli\u003eSold as a set: four 25-foot cables for multiple setups or spare leads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these cables simplify charging multiple vehicles or hard-to-reach batteries?\u003c\/h3\u003e\n\n\u003cp\u003eBy adding 25 feet of cable, you can position a single charger in a stable, weather-safe location and run the extension to several vehicles or batteries around a garage, yard, or storage area. Quick-disconnect plugs let you swap connections without re-routing the charger or wrestling with tight battery access points.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eQuick-connect design for fast, no-tool swapping between batteries.\u003c\/li\u003e\n  \u003cli\u003eExtended reach eliminates the need to move the charger for each vehicle.\u003c\/li\u003e\n  \u003cli\u003ePack of four supports multiple charging points or backup cables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these cables durable and safe to use outdoors?\u003c\/h3\u003e\n\n\u003cp\u003eThe extension leads are built to standard SAE cable construction suitable for typical garage and outdoor charging scenarios, helping keep the charger unit out of wet or cramped spaces. Always follow manufacturer safety guidelines and avoid using with incompatible Battery Tender models or damaged connectors.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStandard SAE insulation for everyday garage and shelter use.\u003c\/li\u003e\n  \u003cli\u003eAvoid exposure to excessive heat, corrosive environments, or frayed wiring.\u003c\/li\u003e\n  \u003cli\u003eInspect connectors before use; replace if pins or housings are compromised.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose between the 6, 12, and 25-foot options?\u003c\/h3\u003e\n\n\u003cp\u003eSelect length based on how far your charger must sit from the battery and how many vehicles you might connect. Shorter cables reduce clutter and voltage drop for nearby batteries, while 25-foot leads maximize flexibility for distant or multiple battery locations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e6-foot: best when charger and battery are in the same bay or close proximity.\u003c\/li\u003e\n  \u003cli\u003e12-foot: a middle ground for small shops or driveways.\u003c\/li\u003e\n  \u003cli\u003e25-foot: ideal for remote storage, multiple vehicles, or keeping chargers indoors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: technicians, mechanics, homeowners, and vehicle owners who use Battery Tender chargers and need extra cable length to safely position the charger out of the elements or to reach several batteries without moving their equipment. Choose this four-pack if you manage multiple vehicles or want spare extension leads for workshops, sheds, or portable charging stations. Always confirm your charger uses the compatible black SAE quick-disconnect before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these with any Battery Tender model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use them with Battery Tender chargers that have black SAE quick-disconnects. They are not compatible with white-plug models or hard-wired clip units.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these extensions affect charging performance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Longer cables can slightly increase voltage drop; 25-foot extensions are standard for typical charging but keep connections clean for best results.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67584881098937,"sku":"B002DTV2S0","price":217.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-25ft-extension-front-view.jpg?v=1790457463"},{"product_id":"battery-tender-5a-12v-smart-charger-maintainer-5-amp-4-stage-for-lead-acid-agm-gel-lithium","title":"Battery Tender 5A 12V Smart Charger \u0026 Maintainer — 5 Amp, 4-Stage for Lead‑Acid, AGM, Gel \u0026 Lithium","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender's 5 amp 12V charger is a fully automatic smart charger and maintainer that safely recharges and keeps lead-acid, AGM, gel, and lithium automotive batteries topped off and ready to use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe 5 AMP 12V Battery Tender (model 022-0186G-DL-WH) combines high-frequency switch-mode electronics with a four-stage charging algorithm so you can connect it and leave it without worry. It intelligently evaluates battery condition, delivers a controlled bulk and absorption charge, and then switches to a maintenance float to prevent overcharging. Compact and lightweight, the unit is designed to serve everything from small powersports batteries up through large automotive and deep-cycle batteries found in cars, trucks, boats and equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this charger protect and extend battery life?\u003c\/h3\u003e\n\u003cp\u003eThis Battery Tender uses a 4-stage charging process—Qualification, Bulk, Absorption and Float—to safely restore and maintain the battery’s state of charge. It prevents overcharge by automatically switching to a float mode once charging is complete, and resumes charging if voltage drops under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQualification stage checks battery condition before applying full current\u003c\/li\u003e\n  \u003cli\u003eBulk delivers up to 5 amps for efficient recharge\u003c\/li\u003e\n  \u003cli\u003eAbsorption stabilizes voltage to complete charging without stress\u003c\/li\u003e\n  \u003cli\u003eFloat maintains full charge long-term without overcharging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it work with my battery type and vehicle?\u003c\/h3\u003e\n\u003cp\u003eYes — the charger is engineered for compatibility with lead-acid chemistries including AGM, gel, flooded, and many lithium types commonly used in automotive and powersports applications. It suits a wide range of battery sizes from small vehicle batteries to large deep-cycle units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for AGM but supports all standard lead-acid batteries\u003c\/li\u003e\n  \u003cli\u003eAppropriate for cars, SUVs, trucks, boats, agriculture and construction equipment\u003c\/li\u003e\n  \u003cli\u003eSafe spark-proof connections and reverse polarity protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and monitor charging status?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: attach the supplied ring terminals or alligator clips to the battery and plug the charger into AC power. A two-color solid-state LED reports the charger’s status, and the unit includes a 72-hour timer for marginal batteries to avoid damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e11 feet total reach: 6 ft AC cord + 5 ft DC output cord for flexible placement\u003c\/li\u003e\n  \u003cli\u003eTwo-color LED clearly shows charging vs maintenance states\u003c\/li\u003e\n  \u003cli\u003eAutomatic resume of charging if voltage falls under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this charger safe and certified for use in regulated markets?\u003c\/h3\u003e\n\u003cp\u003eThe Battery Tender 5A meets multiple safety and regulatory approvals, including UL\/CSA, CE and BC standards, and is specifically approved for sale in California and Oregon. Built-in safety features reduce risks during use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpark-proof lead connection to prevent ignition events\u003c\/li\u003e\n  \u003cli\u003eReverse polarity detection prevents improper connections\u003c\/li\u003e\n  \u003cli\u003e72-hour safety timer protects weak or marginal batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Battery Tender 5 AMP 12V charger is ideal for vehicle owners, fleet managers, boaters, and equipment operators who want a reliable, set-and-forget charging solution. If you maintain seasonal vehicles, store equipment long-term, or need a compact smart charger that safely services AGM and other lead-acid batteries, this model offers professional-level charging control, convenient reach, and industry certifications that make it suitable for home, workshop, and commercial use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the Battery Tender 5A connected long term?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It automatically switches to float\/maintenance mode to safely keep batteries fully charged for extended storage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this charger support AGM and lithium batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s optimized for AGM and supports standard lead-acid types; check your lithium battery’s manufacturer recommendations before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67584933822649,"sku":"B00EDFPN1O","price":196.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-5a-front-view.jpg?v=1790459670"},{"product_id":"battery-tender-5a-selectable-12v-24v-charger-maintainer-screw-mount-weather-resistant-5a-2-5a-output","title":"Battery Tender 5A Selectable 12V\/24V Charger \u0026 Maintainer — Screw‑Mount Weather‑Resistant, 5A\/2.5A Output","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender's switchable 5 AMP charger and maintainer is a heavy-duty, weather-resistant onboard unit that charges 12V\/24V batteries and automatically switches to float mode to keep batteries healthy without overcharging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact screw-mountable charger is engineered for boats, watercraft, industrial machines and vehicles that need reliable, unattended charging. With selectable 5 A or 2.5 A output, reverse-polarity protection, spark-proof connection, and rugged weather resistance, it’s built for installation where vibration, moisture and variable battery sizes are common. The unit charges quickly when needed and then maintains optimal voltage so batteries are ready when you are.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the selectable output make charging more flexible?\u003c\/h3\u003e\n\u003cp\u003eYou can choose between 5 amps for faster charging or 2.5 amps for a gentler charge on smaller batteries. This flexibility lets you match charge rate to battery capacity, battery type, and how quickly you need the battery replenished.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelect 5 A for faster recovery on large starting or deep-cycle batteries.\u003c\/li\u003e\n  \u003cli\u003eChoose 2.5 A to avoid stress on smaller or partially discharged batteries.\u003c\/li\u003e\n  \u003cli\u003eAutomatic float mode preserves battery voltage after full charge to prevent overcharge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it safe to leave connected to a battery long-term?\u003c\/h3\u003e\n\u003cp\u003eThe charger is designed for long-term connection: it completes a full charge then switches to a maintenance float that keeps voltage stable without overcharging. Built-in safety features reduce the risk of connection errors or sparks during hookup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpark-proof lead connection minimizes ignition risks in marine and industrial settings.\u003c\/li\u003e\n  \u003cli\u003eReverse-polarity detection prevents damage if clamps are connected incorrectly.\u003c\/li\u003e\n  \u003cli\u003eFloat-mode charging maintains ideal voltage for long-term storage or seasonal vessels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this unit be mounted onboard and withstand outdoor conditions?\u003c\/h3\u003e\n\u003cp\u003eYes — the charger’s heavy-duty, screw-mountable housing is designed for onboard installation and exposure to demanding environments. Weather resistance and robust construction make it suitable for boats, service vehicles, and industrial equipment where elements and vibration are concerns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScrew-mount brackets enable secure installation in cockpits, engine bays, or under seats.\u003c\/li\u003e\n  \u003cli\u003eDurable enclosure resists moisture and mechanical wear commonly found in marine use.\u003c\/li\u003e\n  \u003cli\u003eCompact form factor fits into tight spaces while maintaining easy access for wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich battery types and applications are supported?\u003c\/h3\u003e\n\u003cp\u003eThe charger supports 12V and 24V systems and works with most lead-acid battery configurations commonly used in marine, automotive, and industrial applications. It’s intended for both starting batteries and many types of deep-cycle batteries used in watercraft and equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 12V and 24V lead-acid batteries including flooded and AGM styles.\u003c\/li\u003e\n  \u003cli\u003eSuitable for boat batteries, personal watercraft, ATVs, service vehicles, and stationary equipment.\u003c\/li\u003e\n  \u003cli\u003eProvides dependable charging and maintenance for seasonal storage or daily use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Battery Tender unit is aimed at boat owners, workshop managers, fleet operators, and outdoor enthusiasts who need a compact, durable onboard charger that can be permanently mounted and left connected. If you want selectable charge rates, safe hookup, automatic float maintenance, and a weather-resistant package for 12V or 24V systems, this model provides a practical balance of power, protection, and installation flexibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this charger work with both 12V and 24V batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It supports both 12V and 24V systems and is suitable for most lead-acid battery types used in marine and vehicle applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mount this charger onboard and leave it connected?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s screw-mountable, weather-resistant, and switches to float mode for safe long-term maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67584946864313,"sku":"B07YNB2JH7","price":315.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-front-view-mounted.jpg?v=1790460484"},{"product_id":"battery-tender-4-bank-smart-12v-charger-5a-total-1-25a-per-bank-for-lead-acid-agm-lifepo4-weather-resistant","title":"Battery Tender 4-Bank Smart 12V Charger — 5A Total (1.25A per Bank) for Lead‑Acid, AGM \u0026 LiFePO4, Weather‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender Plus 4 Bank is a smart 12V charger and maintainer that simultaneously charges up to four batteries at 1.25 amps each while protecting against overcharge and reverse polarity.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, weather-resistant multibank charger is built to keep motorcycles, ATVs, lawn equipment, personal watercraft, and stored vehicles ready by delivering a controlled, microprocessor-managed charge to four separate 12V batteries. It supports a wide range of battery chemistries — including lead-acid, AGM, gel, and LiFePO4 — and automatically switches to a float\/maintain stage when batteries reach their optimal storage voltage, so you can connect and forget with confidence.\u003c\/p\u003e\n\n\u003ch3\u003eHow much charging power does each bank deliver?\u003c\/h3\u003e\n\u003cp\u003eEach of the four independent outputs supplies 1.25 amps, adding up to a 5-amp total capacity for simultaneous charging. That current is tuned for routine charging and long-term maintenance rather than rapid bulk charging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25 A per bank for four 12V batteries\u003c\/li\u003e\n  \u003cli\u003eSmart 4-step charging algorithm to condition and maintain\u003c\/li\u003e\n  \u003cli\u003eBest for small vehicle and accessory batteries, not high-rate rapid charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this charger work with my battery type?\u003c\/h3\u003e\n\u003cp\u003eThe unit is compatible with common 12V chemistries: flooded lead-acid, sealed maintenance-free, AGM, gel, and LiFePO4. The microprocessor modifies charging phases to suit the battery chemistry you connect, reducing stress and helping preserve capacity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for lead-acid, AGM, gel, and LiFePO4 12V batteries\u003c\/li\u003e\n  \u003cli\u003eAutomatic detection and stepwise charging for balanced maintenance\u003c\/li\u003e\n  \u003cli\u003eFloat mode keeps batteries at ideal storage voltage long-term\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety protections are built in?\u003c\/h3\u003e\n\u003cp\u003eMultiple hardware and software safeguards reduce the risk of damage from incorrect connections or prolonged charging. The charger is spark-proof, includes reverse polarity protection, and has a multi-day safety timer to stop charging if an abnormal condition persists.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpark-proof design and reverse polarity protection prevent unsafe hookups\u003c\/li\u003e\n  \u003cli\u003e72-hour safety timer shuts off extended charging to avoid overcharge\u003c\/li\u003e\n  \u003cli\u003eMicroprocessor control minimizes battery stress with regulated current\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to connect and use in a garage or storage area?\u003c\/h3\u003e\n\u003cp\u003eThe unit is compact and designed for straightforward installation and everyday use. It ships with connection accessories and offers weather resistance for semi-exposed environments, so it can live on a shelf or be mounted near stored vehicles without occupying much space.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes alligator clips and ring terminal connectors for flexible hookups\u003c\/li\u003e\n  \u003cli\u003eIP65-rated weather resistance protects against dust and light water exposure\u003c\/li\u003e\n  \u003cli\u003eLightweight housing and mounting options for tidy garage installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Battery Tender Plus 4 Bank is ideal for people who store multiple small vehicles or battery-powered equipment and want a low-effort way to maintain battery health across several units at once. It's well-suited to motorcycle collectors, yard-care professionals, marina owners with multiple small craft, and homeowners who keep ATVs, snowmobiles, or lawn tractors in storage. If you need sustained, safe maintenance for several 12V batteries without daily monitoring, this multibank charger delivers a balanced mix of safety features, multi-chemistry support, and space-conscious design.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave batteries connected long term?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The charger’s float\/maintain mode keeps batteries at safe storage voltage for long-term connection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it support lithium (LiFePO4) batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Battery Tender 4 Bank supports 12V LiFePO4 and common lead-acid chemistries with smart charging profiles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67584953974969,"sku":"B000CIPHUI","price":412.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-plus-4bank-front-view.jpg?v=1790460814"},{"product_id":"battery-tender-2-bank-12v-smart-charger-and-maintainer-2-5a-total-1-25a-per-bank-lifepo4-agm-lead-acid-compatible","title":"Battery Tender 2-Bank 12V Smart Charger and Maintainer — 2.5A Total (1.25A per Bank), LiFePO4\/AGM\/Lead-Acid Compatible","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender Plus 2 Bank is a smart, dual-output 12V charger and maintainer that safely charges and holds two batteries at the correct storage voltage without overcharging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis two-bank charging station contains two independent 1.25 AMP chargers inside a single, compact enclosure. Designed for 12V flooded, sealed, AGM and lithium LiFePO4 batteries, it uses an adaptive three-step program and temperature compensation to charge quickly and then switch to a maintenance float, so batteries stay ready without the harmful effects of classic trickle chargers. Built-in safety features such as reverse polarity protection, spark-proof operation and compliance with UL\/CSA\/CE\/BC standards make it suitable for home, garage, or professional use worldwide.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Battery Tender Plus 2 Bank charge and protect batteries?\u003c\/h3\u003e\n\u003cp\u003eThe unit runs an automatic 3-step charging sequence—initialization, bulk charge and float—to maximize charge while avoiding overcharge. Its smart controller continually adjusts output to match battery needs and ambient temperature, reducing stress on cells.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo independent 12V\/1.25A banks with isolated outputs\u003c\/li\u003e\n  \u003cli\u003eTemperature compensation for proper charge voltage in varying conditions\u003c\/li\u003e\n  \u003cli\u003eSolid-state LEDs show charging stage and health feedback\u003c\/li\u003e\n  \u003cli\u003eReverse polarity and spark-proof design prevents connection errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich battery types and applications does it support?\u003c\/h3\u003e\n\u003cp\u003eThis charger is compatible with common 12V chemistries including flooded lead acid, sealed maintenance-free, AGM and LiFePO4 (lithium iron phosphate). It’s made for vehicles and equipment that sit in storage or need regular topping up.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCars, motorcycles, ATVs, lawn tractors and marine batteries (12V)\u003c\/li\u003e\n  \u003cli\u003eWorks with AGM, flooded, sealed lead-acid and LiFePO4 batteries\u003c\/li\u003e\n  \u003cli\u003eEach bank maintains one battery independently—ideal for dual-vehicle households\u003c\/li\u003e\n  \u003cli\u003eWorldwide AC input lets you use it in different regions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical installation and usage details?\u003c\/h3\u003e\n\u003cp\u003eThe charger includes a 6 ft AC power cord, a 4.5 ft DC output cord, and a 1.5 ft accessory lead so you can position it near batteries or mount it on a wall. Setup is simple: attach clamps or ring terminals, plug in AC, and the charger automatically selects the correct charging profile.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAC cord: 6 ft (18 AWG); DC output cord: 4.5 ft (18 AWG)\u003c\/li\u003e\n  \u003cli\u003eAccessory output 1.5 ft for quick connections or permanent installs\u003c\/li\u003e\n  \u003cli\u003eLED indicators for each bank to monitor status at a glance\u003c\/li\u003e\n  \u003cli\u003eComplies with UL\/CSA\/CE\/BC safety standards for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long is the warranty and what about durability?\u003c\/h3\u003e\n\u003cp\u003eBattery Tender backs the product with a two-year limited warranty. The solid-state electronics and protected enclosure are designed for repeated use, and the charger’s smart management reduces stress on batteries to extend usable life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-year limited manufacturer warranty\u003c\/li\u003e\n  \u003cli\u003eRugged enclosure suitable for garages and workshops\u003c\/li\u003e\n  \u003cli\u003eSolid-state circuitry minimizes moving parts and maintenance\u003c\/li\u003e\n  \u003cli\u003eInternational safety certifications for safe, reliable operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Battery Tender Plus 2 Bank is for vehicle owners, fleet managers, and hobbyists who need a compact, reliable way to charge and maintain two 12V batteries independently. It’s especially useful if you store seasonal vehicles, manage multiple machines, or want a long-term maintenance solution that protects battery health while keeping them ready to go.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this charger maintain LiFePO4 batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it supports LiFePO4 12V batteries, with automatic monitoring and float maintenance designed for long-term storage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I charge two different battery types at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — each bank operates independently, so you can charge different 12V battery types simultaneously if both match supported chemistries.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67584964493497,"sku":"B000NCOKV0","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-plus-2bank-front-view.jpg?v=1790461243"},{"product_id":"battery-tender-4a-smart-charger-and-maintainer-switchable-6v-12v-agm-gel-lithium-compatible","title":"Battery Tender 4A Smart Charger and Maintainer — Switchable 6V\/12V, AGM\/Gel\/Lithium Compatible","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender 4 Amp is a fully automatic, switchable 6V\/12V smart charger and maintainer that safely charges and holds automotive, marine, motorcycle, and deep‑cycle batteries at the correct storage voltage without overcharging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for light commercial shops, home garages and vehicle owners who want a reliable, low‑maintenance charging solution, this model combines a compact footprint with adaptive charging intelligence. Its ISM (Infinite Sequential Monitoring) microcontroller continuously measures the battery hundreds of times per second to apply the optimal charge rate and return to float mode once the battery is full. Rugged safety features—spark‑proof connection and reverse polarity detection—let you connect and leave the unit working without constant supervision.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Battery Tender 4 Amp safely charge different battery chemistries?\u003c\/h3\u003e\n\u003cp\u003eThe unit includes selectable charging modes and chemistry compatibility for lead‑acid, AGM, gel, and LiFePO4 lithium batteries. It uses automatic voltage regulation and an adaptive algorithm to avoid overcharging while restoring capacity effectively.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwitchable 6V\/12V operation for a wide range of batteries\u003c\/li\u003e\n  \u003cli\u003eCompatible with flooded, sealed\/AGM, gel, and LiFePO4 types\u003c\/li\u003e\n  \u003cli\u003eISM adaptive monitoring to adjust charge hundreds of times per second\u003c\/li\u003e\n  \u003cli\u003eAutomatic float\/maintenance mode to hold correct storage voltage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protections and indicators help me use it without worry?\u003c\/h3\u003e\n\u003cp\u003eSafety is built into the design: reverse polarity detection prevents unsafe connections and spark‑proof terminals protect against accidental shorting. A two‑color LED gives a clear visual of charging state and when maintenance mode is active.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpark‑proof during lead connection for safer hookup\u003c\/li\u003e\n  \u003cli\u003eReverse polarity detection to stop power if clamps are reversed\u003c\/li\u003e\n  \u003cli\u003eSolid‑state two‑color LED shows charging or float status\u003c\/li\u003e\n  \u003cli\u003eUL\/CSA, CE and BC approvals for recognized safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to connect and use in my garage or shop?\u003c\/h3\u003e\n\u003cp\u003eThe compact, lightweight housing and included accessories make setup quick. A combined reach of 11 feet—6 ft AC cord and 5 ft DC output—gives flexibility to reach batteries in cars, trucks, motorcycles or stored equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes ring terminal and alligator clip combo cable for permanent or temporary connections\u003c\/li\u003e\n  \u003cli\u003ePush‑button selection toggles between 6V and 12V modes\u003c\/li\u003e\n  \u003cli\u003eCompact form fits on shelves or mounts near a workbench\u003c\/li\u003e\n  \u003cli\u003eConnect‑and‑forget design with automatic maintenance mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what support is offered?\u003c\/h3\u003e\n\u003cp\u003eThe charger ships with the necessary leads to attach to battery terminals and a five‑year warranty supported by lifetime customer service. Documentation outlines correct use and mode selection for different battery types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBattery Tender 4 Amp charger unit\u003c\/li\u003e\n  \u003cli\u003eRing terminal and alligator clip combo cable included\u003c\/li\u003e\n  \u003cli\u003eFive‑year limited warranty plus lifetime customer support\u003c\/li\u003e\n  \u003cli\u003eCertification labels and user manual for safe operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Vehicle owners, fleet managers, marine and powersport enthusiasts, and repair shops that need a dependable, space‑saving charger to maintain 6V and 12V batteries across multiple chemistries. It’s particularly useful when you want a trusted, low‑attention solution to keep batteries healthy in storage or seasonal use without manual monitoring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this charger work with lithium (LiFePO4) batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Battery Tender 4A supports LiFePO4 chemistry with the appropriate mode and provides adaptive charging and maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the charger safe to leave connected long term?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It automatically switches to float\/maintenance mode to hold proper voltage without overcharging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67585057390777,"sku":"B07XMJDJX7","price":190.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-4a-front-view.jpg?v=1790465366"},{"product_id":"battery-tender-15a-12v-battery-charger-and-maintainer-switchable-15-8-2a-lcd-multi-chemistry","title":"Battery Tender 15A 12V Battery Charger and Maintainer — Switchable 15\/8\/2A, LCD, Multi-Chemistry","description":"\u003cstrong\u003eBattery Tender 15 AMP Battery Charger and Maintainer (022-0234-DL-WH) is a versatile 12V charger that delivers selectable 15A, 8A, or 2A charging rates and automatically maintains batteries without overcharging.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact charger is built to bring automotive, powersports, marine, and backup batteries back to full charge and then hold them at an optimal float level. Its selectable chemistry support (standard, AGM, gel, and LiFePO4) and solid-state safety features make it a practical shop or garage tool. An interactive LCD and two-color LED provide clear status feedback so you can leave the unit connected with confidence.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 15 AMP charger protect batteries while charging?\u003c\/h3\u003e\n\u003cp\u003eThe unit uses automatic regulation to deliver a full charge and then switch to float mode to maintain voltage without overcharging. It includes reverse-polarity detection and spark-proof connectors to prevent damage during hookup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic transition from full charge to maintenance float\u003c\/li\u003e\n  \u003cli\u003eReverse-polarity detection locks out incorrect connections\u003c\/li\u003e\n  \u003cli\u003eSpark-proof clamps reduce connection hazards\u003c\/li\u003e\n  \u003cli\u003eISM adaptive charging resumes power if voltage drops under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat battery types and amperage settings can I use?\u003c\/h3\u003e\n\u003cp\u003eThis charger supports a wide range of 12V battery chemistries including flooded lead-acid, sealed\/maintenance-free, AGM, gel cell, and LiFePO4. Three selectable current modes (15A, 8A, 2A) let you choose faster charging or gentle maintenance depending on battery size and condition.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelectable 15A, 8A, and 2A charging rates\u003c\/li\u003e\n  \u003cli\u003eCompatible with lithium (LiFePO4) and multiple lead-acid types\u003c\/li\u003e\n  \u003cli\u003eIdeal for quick charging and long-term storage maintenance\u003c\/li\u003e\n  \u003cli\u003eInteractive LCD shows charge rate and battery percentage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat information does the display and indicators provide?\u003c\/h3\u003e\n\u003cp\u003eThe charger features an interactive LCD that reports the selected charge rate, battery chemistry, percentage charged and any fault messages. A two-color LED offers a quick visual at a glance while the LCD gives detailed real-time feedback.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLCD displays charging rate, battery type, and percent charged\u003c\/li\u003e\n  \u003cli\u003eTwo-color LED indicates charging status and faults\u003c\/li\u003e\n  \u003cli\u003eISM adaptive charging triggers when voltage sags under load\u003c\/li\u003e\n  \u003cli\u003eClear error messages help troubleshoot common hookup issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this unit easy to use and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eThe charger is designed for straightforward operation with a compact footprint and a convenient handle for portability. It includes heavy-duty alligator clips for quick connections and a five-year warranty for long-term peace of mind.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes charger, alligator clips, and user-friendly handle\u003c\/li\u003e\n  \u003cli\u003eCompact, lightweight design fits small workspaces\u003c\/li\u003e\n  \u003cli\u003eFive-year warranty and lifetime customer support\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play setup with clear on-device controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Battery Tender 15 AMP charger is aimed at car owners, motorcycle and marine enthusiasts, fleet managers, and anyone who needs reliable battery recovery and long-term maintenance. It’s especially useful if you have multiple 12V battery types to service and want selectable amperage with clear digital readouts and built-in safety protections for unattended charging.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the charger connected long-term?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It switches to float maintenance after charging, allowing safe long-term connection without overcharging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it work with lithium batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The charger supports LiFePO4 lithium batteries as well as flooded, AGM, and gel lead-acid types.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67585060602041,"sku":"B089GZV2PR","price":261.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-front-view.jpg?v=1790465582"},{"product_id":"battery-tender-12v-charger-maintainer-8a-fast-2a-maintenance-white-ip65-with-6a-power-supply","title":"Battery Tender 12V Charger \u0026 Maintainer — 8A Fast \/ 2A Maintenance, White IP65 with 6A Power Supply","description":"\u003cstrong\u003eBattery Tender Power Tender is an all-in-one 12V charger, maintainer and power supply offering selectable 8 AMP fast charging or 2 AMP maintenance charging with IP65 weather resistance.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact unit delivers flexible charging options for 12V batteries used in cars, motorcycles, boats, ATVs and powersports equipment. Engineered for convenience and safety, it combines a high-current rapid charge mode with a gentle maintenance mode and an integrated 6 AMP 12V power-supply function that keeps vehicle electronics alive during diagnostics or battery swaps. The housing is built to withstand wet and dusty conditions, and the circuitry includes spark-proof and reverse-hookup protections for everyday reliability.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this charger revive a low 12V battery?\u003c\/h3\u003e\n\u003cp\u003eChoose the 8 AMP setting to replenish a depleted 12V battery significantly faster than standard trickle chargers, then switch to 2 AMP for safe long-term maintenance. Charging time depends on battery capacity and state of charge, but the higher current speeds recovery for larger batteries while the 2 AMP mode avoids overcharging during storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8 AMP mode for faster bulk charging of mid-to-large 12V batteries\u003c\/li\u003e\n  \u003cli\u003e2 AMP mode for slow, safe maintenance during long-term storage\u003c\/li\u003e\n  \u003cli\u003eAutomatic regulation prevents overcharge when battery is full\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it while working on a vehicle or running accessories?\u003c\/h3\u003e\n\u003cp\u003eYes — the built-in 6 AMP 12V power supply keeps system voltage stable so you can run accessories or perform diagnostics without draining the battery. That makes it useful for garage work, ECU updates, or keeping infotainment settings when swapping batteries.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 AMP power-supply mode holds system voltage during maintenance\u003c\/li\u003e\n  \u003cli\u003ePrevents data loss and preserves accessory settings when changing batteries\u003c\/li\u003e\n  \u003cli\u003eUseful for powering lights, pumps, and other 12V accessories during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich battery chemistries and environments is it suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe charger supports sealed and flooded lead-acid, AGM, GEL and LiFePO4 lithium batteries, so a single unit covers most automotive and powersports applications. Its IP65-rated enclosure resists dust and water spray, and the operating temperature range accommodates garage and outdoor use in moderate climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with lead-acid, AGM, GEL, and lithium (LiFePO4) 12V batteries\u003c\/li\u003e\n  \u003cli\u003eIP65 weather resistance protects against dust and water spray\u003c\/li\u003e\n  \u003cli\u003eOperates between -4 °F and 104 °F (-20 °C to 40 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and accessory features should I expect?\u003c\/h3\u003e\n\u003cp\u003eDesigned for everyday use, the unit includes spark-proof circuitry, reverse hookup protection, and fully automatic charging that reduces user intervention. It ships with quick-disconnect alligator clips and ring terminals plus a 15 AMP inline fuse, and works with Battery Tender extension cables for longer reach.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpark-proof and reverse-polarity protection for safe connections\u003c\/li\u003e\n  \u003cli\u003eFully automatic operation for worry-free charging and maintenance\u003c\/li\u003e\n  \u003cli\u003eIncludes quick-disconnect clips, ring terminals, and 15A inline fuse\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Battery Tender Power Tender suits vehicle owners, mechanics and hobbyists who need a versatile charger that can rapidly revive a drained battery, reliably maintain stored vehicles, and act as a temporary 12V power supply during repairs. If you work on motorcycles, boats, ATVs or classic cars and want one durable, weather-resistant charger that supports multiple battery chemistries and offers built-in safety features, this model is a practical, compact solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this charger safe for lithium (LiFePO4) batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit supports LiFePO4 chemistry and includes automatic regulation to charge safely when configured for lithium.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave it connected long-term to maintain a stored vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Use the 2 AMP maintenance mode for extended, safe battery upkeep during long-term storage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67585062043833,"sku":"B0FN6576WS","price":259.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-front-view-unit.jpg?v=1790465643"},{"product_id":"battery-tender-10a-12v-smart-charger-maintainer-ip67-waterproof-fast-4-stage-charging-for-trucks-marine-and-rvs","title":"Battery Tender 10A 12V Smart Charger \u0026 Maintainer — IP67 Waterproof, Fast 4‑Stage Charging for Trucks, Marine and RVs","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender Power Tender 10 Amp is a high-output, IP67-rated 12V smart charger and maintainer designed to recharge and preserve large lead-acid and LiFePO4 batteries quickly and safely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for heavy-duty vehicles, boats, and RVs, this charger delivers a faster full charge for big battery banks while providing the intelligent monitoring and protections expected from Battery Tender. A manual chemistry selector lets you choose the correct charging profile for lead-acid variants or LiFePO4 lithium so the unit delivers the proper voltages and float routine. With rugged waterproofing and safety features, it works where smaller, indoor-only chargers cannot.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast will this charger restore a depleted battery?\u003c\/h3\u003e\n\n\u003cp\u003eThis 10 Amp unit significantly shortens recovery time for large batteries compared with lower-output maintainers. For example, a 100Ah battery can be replenished in roughly 10 hours under typical conditions. The charger uses ISM (Infinite Sequential Monitoring) to taper current automatically as the battery approaches full charge, protecting cells during absorption and float stages.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e10 amp bulk output for rapid recovery of 40–200Ah 12V batteries\u003c\/li\u003e\n  \u003cli\u003eISM tapering from bulk to absorption then float for safe charging\u003c\/li\u003e\n  \u003cli\u003eEstimated full charge time: ~10 hours for a 100Ah deeply discharged battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich battery chemistries and sizes are supported?\u003c\/h3\u003e\n\n\u003cp\u003eThe Power Tender 10A supports a broad range of 12V batteries: flooded, AGM, gel, sealed maintenance-free lead-acid, and LiFePO4 lithium. A manual selector switches between dedicated lead-acid and lithium profiles so each chemistry receives the correct absorption voltages and float behavior. It’s sized for battery capacities where faster charging matters—typically 40Ah up to 200Ah banks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with flooded, AGM, GEL, sealed MF, and LiFePO4\u003c\/li\u003e\n  \u003cli\u003eRecommended for 12V batteries in the 40–200Ah range\u003c\/li\u003e\n  \u003cli\u003eManual chemistry selector to apply proper voltage algorithms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install and leave this charger on permanently in wet or dusty locations?\u003c\/h3\u003e\n\n\u003cp\u003eYes. The unit carries an IP67 rating, meaning it’s fully protected against dust and can withstand immersion in water up to 1 meter for short intervals. That level of ingress protection makes it suitable for permanent or semi-permanent installation near bilges, engine rooms, outdoor enclosures, or other harsh environments where lesser chargers would fail.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP67: dust-tight and immersion resistant to 1 meter\u003c\/li\u003e\n  \u003cli\u003eDesigned for bilge-adjacent, marine engine rooms, and outdoor use\u003c\/li\u003e\n  \u003cli\u003eDurable housing and sealed connectors for long-term installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety features protect my vehicle’s electronics and battery?\u003c\/h3\u003e\n\n\u003cp\u003eThe Power Tender 10A includes multiple built-in protections that minimize risk during connection and charging. Spark-proof circuitry prevents current flow until proper polarity is detected, and reverse polarity protection automatically shuts down if clamps are reversed. Short-circuit detection, automatic temperature compensation, and a fused combo cable add layers of safety for both temporary and hardwired setups.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSpark-proof connection and reverse polarity auto-shutdown\u003c\/li\u003e\n  \u003cli\u003eShort-circuit detection and automatic temperature compensation\u003c\/li\u003e\n  \u003cli\u003eIncludes ring terminal\/alligator combo cable with 15A fuse and 12.5+ ft reach\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: If you maintain large 12V battery banks, deep-cycle marine batteries, truck or RV house batteries, or any application where recovery speed and weatherproof durability matter, this is a practical choice. It suits boat owners, overland and RV enthusiasts, fleet and heavy-equipment technicians, and anyone who needs a reliable, installable 10 Amp multi-chemistry charger with professional-grade protections and a long-reach, fused cable.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this charger safe for LiFePO4 batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It has a manual lithium profile that delivers the required absorption voltages and proper float routine for LiFePO4 cells.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the charger connected long-term?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 4-stage ISM charging ends in a maintenance float so it can remain connected indefinitely without overcharging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67585124499641,"sku":"B0FN6P6QXC","price":290.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-power-tender-10a-front-view.jpg?v=1790468064"},{"product_id":"battery-tender-charge-n-start-1100-2-in-1-1000a-jump-starter-12v-1a-smart-charger-auto-switch-spark-proof-clamps","title":"Battery Tender Charge N Start 1100 2-in-1 1000A Jump Starter \u0026 12V\/1A Smart Charger — Auto-Switch, Spark-Proof Clamps","description":"\u003cstrong\u003eBattery Tender Charge N Start 1100 is a dual-function device that combines a 1000-amp jump starter and a smart 12V\/1A battery charger to start engines and maintain batteries with automatic switching and built-in safety.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned with six decades of battery experience, this US-engineered unit merges emergency starting power with ongoing battery maintenance. It’s built to jump-start stalled vehicles while also acting as a trickle charger that keeps both the vehicle battery and the internal jump pack at optimal charge. Rugged clamps, spark-proof circuitry, and temperature compensation make it suitable for garages, boats, ATVs, and roadside use.\u003c\/p\u003e\n\n\u003ch3\u003eHow much starting power can I expect from the Charge N Start 1100?\u003c\/h3\u003e\n\u003cp\u003eThe Charge N Start 1100 delivers a surge of up to 1000 amps, enough to revive many common gasoline and diesel engines quickly. It’s rated to start gasoline engines up to 6.0L and diesel engines up to 3.0L, offering reliable bursts of current for most cars, trucks, and recreational vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1000 amps peak jump-start capability for rapid engine starts.\u003c\/li\u003e\n  \u003cli\u003eSupports up to 6.0L gasoline and 3.0L diesel engines.\u003c\/li\u003e\n  \u003cli\u003eIdeal for cars, SUVs, motorcycles, ATVs, boats and small diesel vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the auto-switch charging function keep batteries ready?\u003c\/h3\u003e\n\u003cp\u003eAn exclusive Auto-Switch feature moves charging between the internal jump starter battery and the connected vehicle battery as needed. The microprocessor monitors charge states and automatically selects which battery to top off, ensuring both are maintained without manual intervention.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatically alternates charging between the jump pack and vehicle battery.\u003c\/li\u003e\n  \u003cli\u003eMicroprocessor-controlled charging prevents overcharging and battery drain.\u003c\/li\u003e\n  \u003cli\u003eTemperature compensation adjusts charge rates for safe performance in changing climates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and convenience features protect me and my battery?\u003c\/h3\u003e\n\u003cp\u003eThe unit includes multiple built-in safeguards—spark-proof clamps, reverse polarity protection, and smart charging algorithms—to reduce user error and protect battery health. Additional conveniences such as copper-plated clamp jaws, an integrated LED emergency light, and a durable storage case make the product practical for roadside emergencies and regular maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpark-proof connection and reverse polarity protection for safer jump starts.\u003c\/li\u003e\n  \u003cli\u003eCopper-plated jaws on heavy-duty clamps for improved conductivity and reliability.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in LED emergency light and a premium storage case for on-the-go use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Battery Tender Charge N Start 1100 is aimed at vehicle owners who want a compact, dependable solution for both emergency starting and long-term battery care. It’s a good match for drivers, motorcyclists, marine users, and fleet operators who need dependable starting power plus automated maintenance without storing multiple devices. If you want a single unit that delivers professional-grade jump starts and smart, hands-off charging, this model covers both needs with industry-grade protections and user-friendly features.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this jump starter work on my diesel pickup?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It can jump diesel engines up to 3.0L. For larger diesel pickups, check your engine size and consult manufacturer recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it maintain a battery left in storage?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The smart 12V\/1A charger and Auto-Switch feature keep both the vehicle battery and internal pack properly topped off.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67585580040377,"sku":"B0F3DSP5WH","price":279.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-charge-n-start-1100-front-view.jpg?v=1790472565"},{"product_id":"battery-tender-charge-n-start-4120-12v-4a-smart-charger-1200a-jump-starter-auto-switch-compact-on-board-maintainer","title":"Battery Tender Charge N Start 4120 12V 4A Smart Charger + 1200A Jump Starter — Auto‑Switch, Compact On‑Board Maintainer","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender Charge N Start 4120 is a two-in-one 12V smart charger and 1200‑amp jump starter that recharges and jump‑starts vehicles while automatically maintaining both its internal battery and the vehicle battery.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned and engineered in the USA, the Charge N Start 4120 combines a 4‑amp microprocessor‑controlled battery charger with a professional‑grade 1200A jump starter in a single compact unit. It targets drivers, riders, and small‑boat owners who want a reliable on‑board or garage solution that keeps batteries ready, delivers fast engine starts for gasoline and diesel engines, and reduces the need for separate devices. Built‑in safety features and an exclusive Auto‑switch Technology make it convenient for routine maintenance and emergency use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Charge N Start 4120 keep my vehicle battery maintained?\u003c\/h3\u003e\n\n\u003cp\u003eThe unit’s smart charging algorithm monitors battery voltage and applies an adaptive charging profile to prevent overcharging and sulfation. Auto‑switch Technology alternates charging between the vehicle battery and the internal jump starter, ensuring both remain at optimal levels without user intervention.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMicroprocessor-controlled, multi‑stage charging adjusts current and voltage.\u003c\/li\u003e\n  \u003cli\u003eTemperature compensation adjusts charging for cold or hot environments.\u003c\/li\u003e\n  \u003cli\u003eAutomatic maintenance mode holds batteries at optimal float voltage.\u003c\/li\u003e\n  \u003cli\u003eAuto-switch cycles charge between internal pack and vehicle battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of vehicles and engines can it jump start?\u003c\/h3\u003e\n\n\u003cp\u003eWith 1200 peak amps the Charge N Start 4120 jump starter handles a wide range of engines, including many cars, light trucks, SUVs, motorcycles, ATVs and some small diesel engines. It is intended for jump‑starting rather than long‑term powering of high‑draw accessories.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eJump starts up to 6.0L gasoline engines reliably.\u003c\/li\u003e\n  \u003cli\u003eSupports diesel engines up to about 4.0L depending on conditions.\u003c\/li\u003e\n  \u003cli\u003eCompact design suitable for motorcycles, ATVs, boats, and cars.\u003c\/li\u003e\n  \u003cli\u003eIncludes heavy‑duty clamps with copper‑plated jaws for strong contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and convenience features does it include?\u003c\/h3\u003e\n\n\u003cp\u003eSafety is layered into the design: spark‑proof clamps, reverse‑polarity protection, and temperature compensation reduce risk during use. The microprocessor control manages charge stages for safer, more effective charging and the included LED emergency light adds practical value for roadside situations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSpark‑proof connection and reverse polarity protection prevent misuse.\u003c\/li\u003e\n  \u003cli\u003eTemperature compensation optimizes charging across climates.\u003c\/li\u003e\n  \u003cli\u003eBuilt‑in LED emergency light aids night or low‑visibility roadside work.\u003c\/li\u003e\n  \u003cli\u003ePremium storage case keeps all components organized and portable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this unit powered and what accessories are included?\u003c\/h3\u003e\n\n\u003cp\u003eThe Charge N Start 4120 plugs into standard AC power for charging and stores energy in its internal battery for jump‑starting. The package is intended to be complete for most users, with heavy‑duty clamps and a convenient carry case to transport and protect the device.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAC‑powered 12V\/4A smart charger charges vehicle or internal battery.\u003c\/li\u003e\n  \u003cli\u003eHeavy‑duty clamps with copper‑plated jaws improve conductivity and durability.\u003c\/li\u003e\n  \u003cli\u003ePremium storage case for tidy storage and easy transport.\u003c\/li\u003e\n  \u003cli\u003eOne‑year warranty backed by Battery Tender support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: the Charge N Start 4120 suits drivers who want a single tool for routine battery maintenance and dependable emergency starting. It’s ideal for commuters, weekend riders, small‑boat owners, ATV users, and anyone who prefers a ready‑to‑use, professionally engineered solution that reduces the need for jumper cables or separate chargers. It’s also a good choice for garages and fleet vehicles that value compact, safe, and automated battery care without complicated setup or frequent monitoring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this jump starter start my diesel truck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It can jump start many diesel engines up to about 4.0L; larger diesels may need a higher‑capacity unit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it charge my motorcycle battery long term?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 12V\/4A smart charger supports maintenance charging and float mode for motorcycle batteries.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67585588265145,"sku":"B0F3G23VWS","price":367.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-charge-n-start-4120-front-view.jpg?v=1790473070"},{"product_id":"battery-tender-10-bank-multibank-charger-10-x-4a-banks-selectable-12v-6v-smart-float-maintenance","title":"Battery Tender 10-Bank Multibank Charger — 10 x 4A Banks, Selectable 12V\/6V, Smart Float Maintenance","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender 10 Bank Multibank Charger is a smart, compact charger that simultaneously charges and maintains up to ten 12V or 6V batteries at 4 amps per bank with automatic float and full-charge switching.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis rugged, space-saving multibank unit is built for garages, shops, and storage facilities where multiple batteries—motorcycle, ATV, lawn equipment, or small vehicle batteries—need reliable charging and long-term maintenance. Its selectable 12V\/6V capability, 4-step charging algorithm, and safety features let you connect and leave batteries without constant supervision, helping preserve battery health over storage periods.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 10-bank charger manage multiple batteries without overcharging?\u003c\/h3\u003e\n\u003cp\u003eThe charger uses independent banks with automatic full-charge detection and a float mode to prevent overcharge once a battery reaches its optimal voltage. Each bank runs Battery Tender’s multi-stage program so batteries get the current they need and then are held at safe voltage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndependent 4-amp output per bank for uniform charging\u003c\/li\u003e\n  \u003cli\u003eAutomatic switch from full-charge to float maintenance\u003c\/li\u003e\n  \u003cli\u003e4-step charging program compatible with various lead-acid chemistries\u003c\/li\u003e\n  \u003cli\u003e25-hour safety timer and spark-proof design for secure operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat battery types and voltages are supported by this unit?\u003c\/h3\u003e\n\u003cp\u003eThis multibank charger accepts both 12V and 6V batteries and supports common battery chemistries, including flooded lead-acid, AGM, gel cell, and LiFePO4 (12V). A selectable voltage setting ensures each bank outputs the correct charging profile for the connected battery type.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelectable 12V or 6V operation per the entire unit\u003c\/li\u003e\n  \u003cli\u003eWorks with flooded, AGM, gel cell, and 12V LiFePO4 batteries\u003c\/li\u003e\n  \u003cli\u003eSuitable for small vehicle batteries: motorcycles, ATVs, lawn mowers, UTVs\u003c\/li\u003e\n  \u003cli\u003e4-step algorithm reduces risk of under- or overcharging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the Battery Tender multibank charger user-friendly for storage and repeated use?\u003c\/h3\u003e\n\u003cp\u003eYes—the unit is designed for connect-and-forget convenience. It’s compact enough for tight spaces, includes ten alligator clips and a six-foot AC cord, and requires minimal user intervention thanks to the automatic maintenance mode.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact, lightweight housing fits shelves and small workbenches\u003c\/li\u003e\n  \u003cli\u003eTen separate alligator clips included for easy hookup\u003c\/li\u003e\n  \u003cli\u003e6-foot AC cord for flexible placement near outlets\u003c\/li\u003e\n  \u003cli\u003e3-year limited warranty for long-term ownership confidence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety features protect batteries and users while charging?\u003c\/h3\u003e\n\u003cp\u003eThe charger integrates multiple protections to keep charging safe: reverse polarity protection prevents damage from incorrect connections, a safety timer limits continuous charging, and the spark-proof design reduces the risk during hookups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReverse polarity protection guards against miswired connections\u003c\/li\u003e\n  \u003cli\u003e25-hour safety auto-shutoff prevents prolonged faults\u003c\/li\u003e\n  \u003cli\u003eSpark-proof clamps and circuitry for safer connections\u003c\/li\u003e\n  \u003cli\u003eFloat mode prevents detrimental overvoltage during long-term storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: This Battery Tender 10 Bank Multibank Charger suits shop owners, fleet managers, restoration hobbyists, or backyard mechanics who need to maintain multiple 6V or 12V batteries reliably. If you store seasonal equipment, manage small vehicle fleets, or maintain several batteries at once and want a compact, intelligent charger with strong safety features and broad battery compatibility, this unit is designed for your needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I charge ten 6V batteries at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit can charge up to ten 6V batteries simultaneously at 4 amps per bank when set to 6V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this charger safe for AGM and LiFePO4 batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It supports flooded, AGM, gel cell, and 12V LiFePO4 batteries using its multi-stage charging program.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67585594228921,"sku":"B000NCOKVU","price":1521.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-10-bank-front-view.jpg?v=1790473421"},{"product_id":"battery-tender-3-amp-smart-charger-maintainer-switchable-6v-12v-agm-and-lithium-ready","title":"Battery Tender 3 AMP Smart Charger \u0026 Maintainer — Switchable 6V\/12V, AGM and Lithium Ready","description":"\u003cstrong\u003eBattery Tender 3 AMP Charger and Maintainer is a compact, switchable smart charger that automatically charges and then gently maintains 6V or 12V lead-acid, AGM, gel, and lithium vehicle batteries.\u003c\/strong\u003e\n\n\u003cp\u003eKeep your vehicle’s battery ready without guessing when to disconnect a charger. This Battery Tender 3 AMP unit delivers controlled amperage to refill depleted batteries, switches to a safe float mode when full, and resumes charging automatically if voltage falls. Its small footprint, built-in safety features, and dual-voltage capability make it a practical shop or garage staple for everyday drivers and seasonal vehicles alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this charger protect my battery from overcharging?\u003c\/h3\u003e\n\u003cp\u003eThe charger uses smart microprocessor control to monitor battery voltage and current, shifting from bulk charging to a float maintenance stage once the battery reaches full charge. If the battery’s voltage drops while connected, the charger will automatically return to charging mode until the proper level is restored.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic float maintenance prevents overcharge stress.\u003c\/li\u003e\n  \u003cli\u003eTwo-color LED shows charging status at a glance.\u003c\/li\u003e\n  \u003cli\u003eSpark-proof connection and reverse-polarity detection for safe hookup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with different battery types and voltages?\u003c\/h3\u003e\n\u003cp\u003eThe Battery Tender 3A is selectable for 6V or 12V systems and supports common battery chemistries found in cars, trucks, and recreational vehicles. It’s compatible with flooded lead-acid, AGM, gel cells, and many lithium batteries, making it versatile for varied vehicle fleets or seasonal equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush-button switchable between 6V and 12V operation.\u003c\/li\u003e\n  \u003cli\u003eSafe for flooded, maintenance-free, AGM, and gel batteries.\u003c\/li\u003e\n  \u003cli\u003eWorks on small automotive and larger vehicle batteries with proper application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to connect and use in a garage or on the go?\u003c\/h3\u003e\n\u003cp\u003eDesigned for straightforward use, the charger ships with a combo cable offering ring terminals and alligator clips so you can hardwire to a battery or clip on quickly. The combined 11 feet of cord length (6 ft AC cord, 5 ft DC output) gives flexibility in placement, while the compact housing fits limited storage space.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCombo cable for permanent or temporary connections.\u003c\/li\u003e\n  \u003cli\u003eCompact, lightweight design fits small workspaces.\u003c\/li\u003e\n  \u003cli\u003eSimple LED feedback keeps operation intuitive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and certification features should I expect?\u003c\/h3\u003e\n\u003cp\u003eSafety is integrated at multiple levels: the unit is spark-proof on connection, will not power if polarity is reversed, and includes adaptive charging to respond to battery condition changes. It meets common safety standards and comes with manufacturer support for added peace of mind.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReverse polarity detection and spark-proof connector.\u003c\/li\u003e\n  \u003cli\u003eUL\/CSA, CE, and BC approvals for recognized safety compliance.\u003c\/li\u003e\n  \u003cli\u003eIncludes a 5-year manufacturer warranty and lifetime customer service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own or maintain cars, SUVs, trucks, seasonal vehicles, or equipment that sit unused for stretches—motorcycles, classics, farm machinery, or spare vehicles—this Battery Tender 3 AMP charger is built to keep batteries healthy without daily monitoring. It’s a good fit for DIYers, fleet managers, and anyone who wants a dependable, safe way to maintain battery readiness with minimal upkeep.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the Battery Tender 3A connected long-term?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It switches to float mode and maintains safe voltage so batteries can stay connected for extended periods.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it work with lithium and AGM batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It supports flooded lead-acid, AGM, gel, and many lithium batteries when the correct voltage is selected.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67585596457145,"sku":"B016S7NHWQ","price":175.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-front-view_c774402b-482e-4cdf-9297-dea92f3c3535.jpg?v=1790473567"},{"product_id":"battery-tender-battery-charger-800-ma-supersmart-encapsulated-waterproof-12v-maintainer-for-motorcycles-boats","title":"Battery Tender Battery Charger 800 mA SuperSmart — Encapsulated Waterproof 12V Maintainer for Motorcycles \u0026 Boats","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender 800 is a compact, fully automatic 800 mA SuperSmart charger that continuously monitors, charges, and maintains lead-acid batteries while its encapsulated housing provides moisture and vibration protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for riders, boaters, and outdoor vehicle owners who need reliable battery care, the Battery Tender 800 combines an intelligent charging algorithm with a rugged, fully encapsulated enclosure. It delivers steady 800 mA charging, automatically transitions to maintenance mode once the battery is full, and accepts 100–240 VAC worldwide. Small enough to fit beside electronics yet tough enough to resist shock and water intrusion, this charger is built for demanding, wet, and mobile environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Battery Tender 800 protect my battery from overcharging?\u003c\/h3\u003e\n\n\u003cp\u003eThe built-in SuperSmart microcontroller continuously assesses battery voltage and adjusts charging to prevent overcharge. It brings the battery to a full charge, then switches to a float\/maintenance stage that supplies only the current needed to keep the battery stable without causing damage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAutomatic multi-stage charging: bulk, absorption, float\u003c\/li\u003e\n  \u003cli\u003eContinuous monitoring by an integrated IC chip\u003c\/li\u003e\n  \u003cli\u003eMaintenance\/float mode prevents trickle overcharge\u003c\/li\u003e\n  \u003cli\u003eSpark-proof and reverse polarity protection for safe connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this charger safe to use outdoors or in wet conditions?\u003c\/h3\u003e\n\n\u003cp\u003eThe Battery Tender 800 is fully encapsulated in a flame-retardant, thermally conductive epoxy that protects internal electronics from moisture, vibration, and shock. The rugged construction and waterproof design make it suitable for ATVs, motorcycles, boats, or any equipment exposed to rain, spray, or splashes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEpoxy-encapsulated electronics resist water and vibration\u003c\/li\u003e\n  \u003cli\u003eUL-recognized compound for flame retardancy and thermal performance\u003c\/li\u003e\n  \u003cli\u003eOperates reliably even if briefly submerged or splashed\u003c\/li\u003e\n  \u003cli\u003eCompact, mountable housing for secure outdoor installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this charger work when I travel internationally?\u003c\/h3\u003e\n\n\u003cp\u003eYes. The Battery Tender 800 accepts a universal input range of 100–240 VAC at 50\/60 Hz, so you can use it worldwide without an external converter. Its lightweight design and small footprint make it easy to pack with tools or stow in a vehicle or boat locker.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUniversal input voltage: 100–240 VAC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003eCompact size similar to a computer mouse for easy transport\u003c\/li\u003e\n  \u003cli\u003eLightweight and mountable for onboard or garage use\u003c\/li\u003e\n  \u003cli\u003eWorks with common 12 V lead-acid batteries used in powersports and marine applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and operate?\u003c\/h3\u003e\n\n\u003cp\u003eOperation is simple: connect to the battery with the supplied leads or ring terminals, plug into AC power, and the charger handles the rest. Safety features such as reverse polarity and short-circuit protection reduce user error, while the automatic maintenance cycle means you don’t need to babysit the charger.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play: simple connection and automatic charging\u003c\/li\u003e\n  \u003cli\u003eSpark-proof clips and reverse polarity protection for safe hookups\u003c\/li\u003e\n  \u003cli\u003eNo manual switching—automatic transition to maintenance mode\u003c\/li\u003e\n  \u003cli\u003eMountable design for permanent or temporary installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders, boat owners, and powersports enthusiasts who want a dependable, low-maintenance charging solution that stands up to wet or mobile conditions. If you need a small yet robust 800 mA charger for maintaining 12 V lead-acid batteries—especially when exposure to moisture, vibration, or travel is likely—the Battery Tender 800 delivers intelligent charging performance in a weather-resistant package.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the Battery Tender 800 be left connected indefinitely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its SuperSmart circuitry switches to a maintenance float mode, allowing safe long-term connection without overcharging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it work worldwide with different voltages?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The charger accepts 100–240 VAC at 50\/60 Hz, so it operates internationally without a converter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67585625391289,"sku":"B000CITKCE","price":131.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-800-front-view.jpg?v=1790474674"},{"product_id":"battery-tender-12-foot-sae-extension-cables-4-pack-black-10a-fused-quick-disconnect-leads","title":"Battery Tender 12-Foot SAE Extension Cables 4-Pack - Black, 10A Fused Quick-Disconnect Leads","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender's 12-foot fused SAE extension cable 4-pack lengthens the reach of compatible Battery Tender chargers with a 10A quick-disconnect harness for safe, convenient charging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese black SAE extension leads let you place your charger farther from a vehicle or battery without running long aftermarket wires. Each lead is fused, rated to 10 amps, and uses the Battery Tender quick-connect plugs found on many Battery Tender models. The pack contains four identical extension cables so you can equip multiple chargers or keep spares on hand.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this extension cable make charging more convenient?\u003c\/h3\u003e\n\u003cp\u003eThe extra 12 feet of cable gives flexibility when positioning a charger relative to vehicles, storage spaces, or outlets. Quick-disconnect plugs let you attach and detach the lead in seconds, so you can leave harnesses on batteries or move chargers between machines easily.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-foot length for longer reach and easier placement\u003c\/li\u003e\n  \u003cli\u003eQuick-disconnect plugs for fast attachment and removal\u003c\/li\u003e\n  \u003cli\u003eFour cables in the pack for multiple setups or backups\u003c\/li\u003e\n  \u003cli\u003eBlack color blends with tool and garage equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Battery Tender chargers work with these extension leads?\u003c\/h3\u003e\n\u003cp\u003eThese SAE extensions are made to pair with Battery Tender models that use the standard quick-disconnect plug style — Junior, Plus (12V models), 2-Bank, 4-Bank, 5-Bank, and 10-Bank units. They are not compatible with units that use white quick-disconnect plugs or hard-wired clip connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Battery Tender Junior, Plus (12V), 2\/4\/5\/10-Bank chargers\u003c\/li\u003e\n  \u003cli\u003eNot compatible: 6V Battery Tender Plus or any unit with white quick-disconnect plugs\u003c\/li\u003e\n  \u003cli\u003eDo not use with permanently hard-wired clip leads\u003c\/li\u003e\n  \u003cli\u003eCheck your charger plug color and style before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety features and electrical specs are included?\u003c\/h3\u003e\n\u003cp\u003eEach extension is fitted with a built-in fuse and is rated for a maximum continuous current of 10 amps to match typical Battery Tender charging currents. Using the correct fused extension reduces the risk of overload if the cable is accidentally shorted or improperly connected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFused design for overcurrent protection\u003c\/li\u003e\n  \u003cli\u003eMaximum current rating: 10A\u003c\/li\u003e\n  \u003cli\u003eDurable insulated SAE-style quick-disconnect plugs\u003c\/li\u003e\n  \u003cli\u003eBlack jacketed cable for abrasion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and store these leads for best results?\u003c\/h3\u003e\n\u003cp\u003eAttach the quick-disconnect to the matching charger lead before connecting to a battery; remove power before disconnecting the cable. Store the cables coiled in a dry area to prevent kinking and protect the fuse ends from corrosion or impact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways connect with the charger powered off when possible\u003c\/li\u003e\n  \u003cli\u003eKeep fuse ends clean and dry to ensure good contact\u003c\/li\u003e\n  \u003cli\u003eCoil cables without tight bends to extend service life\u003c\/li\u003e\n  \u003cli\u003eLabel or color-code leads if you operate multiple chargers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These 12-foot Battery Tender SAE extension cables are designed for riders, car enthusiasts, garage owners, and fleet managers who need flexible charger placement. If you own compatible Battery Tender chargers and want safer, longer-reach connections—or you need multiple leads for several vehicles—the 4-pack gives ready-to-use, fused extensions for routine maintenance and seasonal storage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these extensions compatible with 6V Battery Tender Plus units?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These 12-foot SAE extensions are not compatible with 6V Battery Tender Plus models or units using white quick-disconnect plugs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum current these extension cables support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each fused extension is rated for a maximum continuous current of 10 amps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67585772978361,"sku":"B00230JWAO","price":135.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-front-packaging.jpg?v=1790477138"},{"product_id":"battery-tender-plus-12v-1-25a-charger-and-maintainer-compact-multi-stage-float-for-agm-flooded-batteries","title":"Battery Tender Plus 12V 1.25A Charger and Maintainer — Compact Multi‑Stage Float for AGM \u0026 Flooded Batteries","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender Plus 12V (1.25A) is a compact automatic charger and maintainer that delivers a controlled full charge and then safely holds 12‑volt automotive, marine, and powersport batteries at optimal voltage for long-term storage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompact and intelligent, the Battery Tender Plus 022-0185G-DL-WH uses multi‑stage charging algorithms to bring flooded and AGM lead‑acid batteries up to full capacity, then switches to a float\/maintenance mode to prevent overcharging. It is designed for seasonal vehicles, backup batteries, and equipment that sit idle for stretches of time. The unit is California compliant and built to reduce battery sulfation and self‑discharge effects without requiring constant monitoring.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this charger protect a battery left in storage?\u003c\/h3\u003e\n\n\u003cp\u003eThe Battery Tender Plus continually monitors battery voltage and applies the correct voltage and current profile across charge stages. After completing a full charge, it automatically transitions to a low‑current float state that keeps the battery topped off while preventing overcharge damage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMulti‑stage charging reduces heat and stress on battery plates.\u003c\/li\u003e\n  \u003cli\u003eFloat mode maintains safe voltage for weeks or months of storage.\u003c\/li\u003e\n  \u003cli\u003eAutomatic reconnection and restart if battery voltage drops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich battery types and vehicle applications will this work with?\u003c\/h3\u003e\n\n\u003cp\u003eThis 12V, 1.25‑amp model is suitable for small to medium batteries found in motorcycles, ATVs, lawn tractors, scooters, classic cars, and marine trolling motors. It supports both flooded (wet) and AGM lead‑acid chemistries commonly used in powersports and small automotive batteries.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAGM and flooded lead‑acid compatibility.\u003c\/li\u003e\n  \u003cli\u003eIdeal for powersports, seasonal cars, and lawn equipment.\u003c\/li\u003e\n  \u003cli\u003eWorks with batteries typically 4–40 Ah and larger when used for maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and convenience features does the Battery Tender Plus include?\u003c\/h3\u003e\n\n\u003cp\u003eThe charger includes built‑in safeguards such as reverse‑polarity protection, short circuit protection, and temperature compensation to reduce risk during charging. Its compact enclosure and easy‑to‑read LED indicators make it simple to install, monitor, and store when not in use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReverse‑polarity and short‑circuit protection for safe operation.\u003c\/li\u003e\n  \u003cli\u003eAutomatic float and desulfation routines extend battery life.\u003c\/li\u003e\n  \u003cli\u003eLED status indicators show charging stage and readiness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to connect and use day‑to‑day?\u003c\/h3\u003e\n\n\u003cp\u003eSetup is straightforward: connect the clamps or ring terminals to the battery, plug the charger into a standard outlet, and the unit manages the rest. The low amp output is safe for long‑term connection, allowing owners to hook up the charger and forget it until needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eQuick clamp or ring terminal connections for permanent or temporary use.\u003c\/li\u003e\n  \u003cli\u003ePlug‑and‑play operation—no manual charge‑rate adjustments required.\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits in garages, trunks, or tool chests.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a motorcycle, ATV, snowmobile, classic car, boat accessory battery, or lawn tractor and you value reliable starting power after storage periods, the Battery Tender Plus 12V 1.25A is built for you. It’s especially useful for owners who prefer a low‑maintenance solution to prevent battery failure between seasons, collectors maintaining infrequently used vehicles, and anyone who wants a safe, California‑compliant charger that can be left connected without worry.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the Battery Tender Plus connected all winter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The automatic float mode safely maintains battery voltage for extended storage without overcharging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this charger work with AGM batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Battery Tender Plus supports both AGM and flooded lead‑acid batteries.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67585812922553,"sku":"B00DJ5KEEA","price":156.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-plus-front-panel.jpg?v=1790478106"},{"product_id":"battery-tender-plus-12v-1-25a-smart-battery-charger-maintainer-selectable-6v-12v-multi-stage-float","title":"Battery Tender Plus 12V 1.25A Smart Battery Charger \u0026 Maintainer — Selectable 6V\/12V, Multi-Stage Float","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender Plus 12V 1.25A is a smart charger and maintainer that fully charges 12V powersports batteries and automatically switches to safe float maintenance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, lightweight unit from Battery Tender is built for motorcycles, ATVs, snowmobiles, scooters, and other powersports vehicles. It delivers a higher charging rate than the Junior model to replenish batteries faster, then holds them at optimal voltage with an automatic float mode. Rugged safety features include spark-proof lead connection and reverse polarity protection, and the selectable design supports 6V or 12V systems and most lead-acid battery types.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this charger restore a depleted powersports battery?\u003c\/h3\u003e\n\u003cp\u003eThe 1.25 amp charge rate gives a faster charge than many trickle chargers without risking overcharge thanks to its automatic multi-stage control. Charging time varies with battery capacity and state of charge, but the unit completes the bulk charge and then transitions to a maintenance float to preserve battery health.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25 amps of regulated charging for quicker replenishment\u003c\/li\u003e\n  \u003cli\u003eAutomatic multi-stage control: bulk, absorption, and float\u003c\/li\u003e\n  \u003cli\u003eCompatible with 12V lead-acid, AGM, flooded, and gel batteries\u003c\/li\u003e\n  \u003cli\u003e50% more power than the Battery Tender Junior for faster topping-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it safe to leave connected for long-term storage?\u003c\/h3\u003e\n\u003cp\u003eYes — once a full charge is reached, the charger switches to a float mode that supplies minimal current to keep the battery at proper voltage without overcharging. Built-in protections make it spark-proof and guard against reverse polarity, helping prevent damage during hook-up or extended maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic float-mode maintenance for months-long storage\u003c\/li\u003e\n  \u003cli\u003eSpark-proof lead connections reduce hookup hazards\u003c\/li\u003e\n  \u003cli\u003eReverse polarity detection prevents accidental misconnection\u003c\/li\u003e\n  \u003cli\u003eLightweight, compact housing for easy mounting or storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich batteries and vehicles will this unit work with?\u003c\/h3\u003e\n\u003cp\u003eThe Battery Tender Plus is designed for 12V powersports batteries and also has selectable 6V\/12V capability for flexibility. It supports most lead-acid chemistries, including standard flooded cells and maintenance-free types like AGM and gel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for motorcycles, ATVs, UTVs, snowmobiles, scooters, and PWCs\u003c\/li\u003e\n  \u003cli\u003eWorks with flooded, AGM, and gel lead-acid batteries\u003c\/li\u003e\n  \u003cli\u003eSelectable 6V\/12V for different vehicle needs\u003c\/li\u003e\n  \u003cli\u003eGood choice for seasonal storage or intermittent use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical features make it easy to use?\u003c\/h3\u003e\n\u003cp\u003eThe charger is designed to be plug-and-play: connect the leads, select the proper voltage if needed, and let it manage the battery automatically. Its compact form factor fits in small storage spaces, while the durable enclosure and covered connections simplify installation on a variety of vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple hookup with quick-disconnect harness or ring terminals\u003c\/li\u003e\n  \u003cli\u003eCompact, lightweight design stores easily with tools\u003c\/li\u003e\n  \u003cli\u003eLEDs or status indicators display charge progress and faults\u003c\/li\u003e\n  \u003cli\u003eIndustry-leading 5-year warranty for long-term confidence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders, powersports owners, and anyone who stores vehicles seasonally will benefit from the Battery Tender Plus 12V 1.25A charger. It’s well suited for people who want faster charging than a trickle charger, reliable long-term maintenance without monitoring, and built-in safety features for peace of mind when hooking up batteries in garages, sheds, or workshops.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the Battery Tender Plus connected all winter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It switches to an automatic float mode to safely maintain the battery over long storage periods.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this charger work on AGM batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is compatible with AGM, gel, flooded, and other lead-acid maintenance-free battery types.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67585827733689,"sku":"B01L0HTX72","price":156.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-plus-front-view.jpg?v=1790478366"},{"product_id":"battery-tender-plus-12v-1-25a-charger-maintainer-smart-4-step-float-led-status","title":"Battery Tender Plus 12V 1.25A Charger \u0026 Maintainer — Smart 4-Step Float, LED Status","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender Plus is a 12V, 1.25 amp smart charger and maintainer that safely charges, protects, and keeps automotive and motorcycle batteries at optimal float voltage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, intelligent charger is designed to replace old-school trickle chargers with a 4-step adaptive charging algorithm that senses battery condition and automatically switches between charge and float modes. It’s suited for a range of 12V lead-acid batteries used in cars, motorcycles, ATVs, lawn mowers, and classic vehicles where long-term storage or intermittent use would otherwise drain the battery.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Battery Tender Plus protect my battery during long storage?\u003c\/h3\u003e\n\n\u003cp\u003eThe Battery Tender Plus monitors battery voltage and switches to a precision float-charge when full, preventing overcharging and sulfation that shorten battery life. If the battery voltage falls again, the charger will automatically resume charging to bring it back to the safe float range.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdaptive 4-step charging: initialization, bulk charge, absorption, and float maintenance.\u003c\/li\u003e\n  \u003cli\u003eAutomatic resume if voltage drops below the set threshold.\u003c\/li\u003e\n  \u003cli\u003eTwo-color LED status indicator for quick state checks.\u003c\/li\u003e\n  \u003cli\u003eSuitable for long-term storage without constant supervision.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this charger work for my car or motorcycle battery?\u003c\/h3\u003e\n\n\u003cp\u003eYes. The Battery Tender Plus is made for standard 12V lead-acid batteries, including flooded, AGM, and gel types commonly found in cars, motorcycles, ATVs, and lawn equipment. Its modest 1.25 amp rate is ideal for safe charging and maintaining batteries without overheating or stressing cells.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with most 12V lead-acid battery chemistries.\u003c\/li\u003e\n  \u003cli\u003e1.25A output: gentle charging for small and medium capacity batteries.\u003c\/li\u003e\n  \u003cli\u003eIncludes ring terminal and alligator clip accessories for flexible connections.\u003c\/li\u003e\n  \u003cli\u003eQuick disconnect harness for fast, convenient hookup and removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy and safe is it to use the Battery Tender Plus?\u003c\/h3\u003e\n\n\u003cp\u003eThe unit is designed for straightforward, worry-free operation: connect the clip or ring terminal, plug into a standard outlet, and the charger’s solid-state circuitry handles the rest. LED colors clearly show charging stages, and internal protections guard against reverse polarity and short circuiting.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTwo-color LED charge status gives immediate feedback.\u003c\/li\u003e\n  \u003cli\u003eFused accessory cables improve installation safety.\u003c\/li\u003e\n  \u003cli\u003eSolid-state protections reduce user error risks.\u003c\/li\u003e\n  \u003cli\u003eLifetime customer support and 10-year manufacturer warranty included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories and warranty come with the charger?\u003c\/h3\u003e\n\n\u003cp\u003eThe package includes a fused ring terminal harness, alligator clip accessory cables and a quick-disconnect harness so you can create a permanent or temporary connection. Battery Tender backs the product with a ten-year warranty and ongoing customer support for peace of mind.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFused ring terminal for permanent battery hookups.\u003c\/li\u003e\n  \u003cli\u003eAlligator clips for temporary or shared use.\u003c\/li\u003e\n  \u003cli\u003eQuick-disconnect harness for fast, tool-free attachment.\u003c\/li\u003e\n  \u003cli\u003e10-year manufacturer warranty plus lifetime support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders, hobbyists, vintage car owners, fleet managers, and homeowners who want a compact, reliable way to charge and maintain 12V batteries without constant monitoring will benefit from the Battery Tender Plus. It’s particularly useful when vehicles sit idle for weeks or months, or when a gentle, intelligent charger is preferred over high-current chargers that require more oversight.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the Battery Tender Plus connected all the time?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It has automatic float maintenance and will safely remain connected to prevent self-discharge without overcharging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this charger compatible with AGM batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Battery Tender Plus supports common 12V lead-acid types including AGM, gel, and flooded batteries.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67586403827897,"sku":"B00068XCQU","price":146.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-plus-front-panel_84fb7bd8-c056-4d32-b81a-c2252dbab249.jpg?v=1790482891"},{"product_id":"battery-tender-6v-12v-2-amp-battery-charger-selectable-lead-acid-lithium-automatic-maintenance-float","title":"Battery Tender 6V\/12V 2 AMP Battery Charger — Selectable Lead‑Acid \u0026 Lithium, Automatic Maintenance Float","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender’s 6V\/12V 2 AMP selectable charger charges and then safely maintains lead‑acid and lithium powersport batteries to prevent overcharging during storage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact charger is designed for motorcycles, ATVs, snowmobiles, lawn tractors and other powersports equipment that need reliable charging and long‑term maintenance. It automatically detects selected voltage, supplies controlled current, and switches to a maintenance float mode to preserve battery health while preventing the common risks of trickle charging. The unit includes both ring terminal and alligator clip connectors, and is certified to North American safety standards for dependable everyday use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the selectable 6V\/12V function help my vehicle batteries?\u003c\/h3\u003e\n\n\u003cp\u003eSelecting the correct voltage ensures the charger matches the electrical system of your battery so it delivers the right charging profile. The ability to choose either 6V or 12V makes the charger versatile for a range of small vehicles and seasonal equipment. Proper voltage selection reduces stress on battery cells and supports a full charge before transitioning to maintenance mode.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eManual 6V or 12V selection to match battery type and vehicle system\u003c\/li\u003e\n  \u003cli\u003e2 amp output balanced for powersport batteries without overheating\u003c\/li\u003e\n  \u003cli\u003eAutomatic switch to float\/maintain once fully charged\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this charger work with lead‑acid and lithium batteries?\u003c\/h3\u003e\n\n\u003cp\u003eThe Battery Tender 2A charger supports common 12V lead‑acid chemistries including flooded, AGM and gel, and it also accommodates compatible lithium battery types when selectable settings are used per manufacturer recommendations. The four‑stage charging process helps optimize charge without overdoing it, which is important for different battery chemistries.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with 12V flooded, AGM, and gel lead‑acid batteries\u003c\/li\u003e\n  \u003cli\u003eSelectable modes to support lithium batteries when specified\u003c\/li\u003e\n  \u003cli\u003eFour‑stage charging: initialization, bulk, absorption, and float maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and monitoring features are included?\u003c\/h3\u003e\n\n\u003cp\u003eThe charger uses solid‑state electronics and a two‑color LED indicator to communicate charge status and voltage conditions, so you can see when the battery is charging, fully charged, or if voltage drops require resumed charging. It includes protections to prevent overcharging and is certified to ETL, FCC, and other standards for electrical safety and emissions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTwo‑color LED shows charging state and maintenance mode\u003c\/li\u003e\n  \u003cli\u003eAutomatic resume of full charge if battery voltage falls under load\u003c\/li\u003e\n  \u003cli\u003eETL US\/CSA, FCC, ICES, and BC certifications for safe operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the charger to install and use?\u003c\/h3\u003e\n\n\u003cp\u003eSetup is straightforward: choose the correct voltage, connect either the ring terminal or alligator clip, plug it in, and the charger handles the rest. Its low‑maintenance design is tailored for busy owners who need reliable overnight or seasonal charging without constant monitoring. The included accessory cable gives flexibility for both permanent and temporary connections.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes ring terminal and alligator clip accessory cable for different hookups\u003c\/li\u003e\n  \u003cli\u003ePlug‑and‑play operation with automatic float maintenance\u003c\/li\u003e\n  \u003cli\u003eCompact housing for easy mounting or storage when not in use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Battery Tender charger is ideal for owners of motorcycles, ATVs, snowmobiles, riding mowers and other small engine vehicles who want a dependable, compact charger that supports multiple battery chemistries and switches to safe maintenance mode. It’s a good fit for seasonal vehicle storage, hobbyists who perform their own maintenance, and anyone who needs a simple, certified charger to keep batteries ready without overcharging.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this charger stay connected long‑term without damaging the battery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It switches to float maintenance after a full charge to prevent overcharging and maintain safe voltage during long‑term storage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the charger include connectors for different hookup types?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes a ring terminal and an alligator clip accessory cable for both permanent and temporary connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67586503835833,"sku":"B09XP77JCS","price":146.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-front-view_150249dd-e268-4542-9623-57600ab462dd.jpg?v=1790485109"},{"product_id":"battery-tender-junior-6v-1-25a-charger-and-maintainer-compact-fully-automatic-4-step-float-for-flooded-agm-gel","title":"Battery Tender Junior 6V 1.25A Charger and Maintainer — Compact Fully Automatic 4‑Step Float for Flooded\/AGM\/Gel","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender Junior 6V, 1.25 AMP is a compact, fully automatic charger and maintainer that safely charges and preserves 6-volt lead-acid batteries for cars, motorcycles, ATVs, and stored vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSmall but intelligent, this Battery Tender unit uses a multi-stage charging algorithm to bring a drained 6V battery to full capacity and then switch to a float mode that preserves charge without overcharging. It supports flooded, AGM, and gel lead-acid batteries and includes safety features like spark-proof circuitry and reverse-connection detection. Lightweight and portable, it's useful in garages, storage areas, and when preparing seasonal vehicles for use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the charger protect my 6V battery from damage?\u003c\/h3\u003e\n\u003cp\u003eThe Battery Tender Junior applies a controlled, multi-step charging routine that finishes with a low-current float stage so batteries remain at safe voltage without continuous high-current stress. If voltage falls below a safe threshold, the unit automatically returns to charging to restore optimal levels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour-step charging: initialization, bulk charge, absorption, float\u003c\/li\u003e\n  \u003cli\u003eAutomatic float to prevent overcharge and reduce sulfation\u003c\/li\u003e\n  \u003cli\u003eAdaptive restart if battery voltage drops under load\u003c\/li\u003e\n  \u003cli\u003eSpark-proof design and reversed hookup detection for safe attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this charger work with different 6V battery types and sizes?\u003c\/h3\u003e\n\u003cp\u003eYes — the Junior is compatible with common 6-volt lead-acid chemistries, including flooded, AGM, and gel cell batteries. Its 1.25 amp output is tailored for small to medium 6V batteries typically found in motorcycles, classic cars, ATVs, lawn tractors, and similar equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated output: 6V, 1.25 amps for gentle, long-term charging\u003c\/li\u003e\n  \u003cli\u003eSuitable for small engine and accessory batteries used seasonally\u003c\/li\u003e\n  \u003cli\u003eIncludes ring terminals and alligator clips for flexible connections\u003c\/li\u003e\n  \u003cli\u003eCompact footprint makes it easy to store with the vehicle or in a toolbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the Battery Tender Junior safely and conveniently?\u003c\/h3\u003e\n\u003cp\u003eConnect the included cable to the battery using ring terminals or alligator clips, plug the charger into standard AC power, and the device manages the rest. A two-color LED indicates charging status and alerts you if voltage drops too low, so there's no need for constant supervision.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play: automatic detection and charging sequence\u003c\/li\u003e\n  \u003cli\u003eLED status indicator for charge\/float conditions and faults\u003c\/li\u003e\n  \u003cli\u003eLightweight (0.65 lb) and small (4.4 x 2.9 x 2.15 in) for portability\u003c\/li\u003e\n  \u003cli\u003eETL, FCC, ICES, and CSA certified for safety compliance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories and support come with the charger?\u003c\/h3\u003e\n\u003cp\u003eThe package includes a combo cable with ring terminals and alligator clips so you can attach the charger permanently or temporarily. Battery Tender backs the Junior with a five-year warranty and lifetime customer support to help with setup or troubleshooting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCombo cable: ring terminals and alligator clips included\u003c\/li\u003e\n  \u003cli\u003eInstruction manual for safe installation and operation\u003c\/li\u003e\n  \u003cli\u003eFive-year warranty plus lifetime customer support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Battery Tender Junior 6V, 1.25 AMP charger is ideal for motorcycle owners, classic car keepers, ATV riders, and anyone who stores small 6V battery-powered equipment seasonally. Choose it if you want a lightweight, easy-to-use charger that maintains battery health, prevents overcharging, and offers reliable safety features without bulky hardware or manual monitoring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the Battery Tender Junior connected indefinitely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It switches to a safe float mode after fully charging, allowing long-term connection without overcharging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this charger compatible with 6V AGM batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit supports flooded, AGM, and gel 6V lead-acid batteries with its multi-stage charging program.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67586890563769,"sku":"B00Y54JI4G","price":104.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-junior-front-view.jpg?v=1790496124"},{"product_id":"battery-tender-junior-12v-800ma-smart-charger-switchable-lead-acid-lifepo4-maintainer-compact","title":"Battery Tender Junior 12V 800mA Smart Charger — Switchable Lead-Acid \u0026 LiFePO4 Maintainer, Compact","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender Junior 12V, 800mA is a compact smart charger and maintainer that safely charges and preserves 12V lead-acid and lithium (LiFePO4) powersports batteries.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis switchable Battery Tender unit combines a small footprint with intelligent charging to keep motorcycles, ATVs, UTVs, scooters, and personal watercraft batteries healthy between rides. Designed for routine maintenance rather than rapid recovery, the Junior delivers a controlled 800mA charge and automatically stages its charging sequence so batteries finish at the correct voltage without overcharging. The charger is spark-proof, reversible-polarity protected, and certified to North American safety standards, backed by a five-year warranty.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Battery Tender Junior protect my battery during long storage?\u003c\/h3\u003e\n\n\u003cp\u003eThe Junior uses a microcontroller that continuously monitors battery voltage and adjusts the charge cycle to maintain an optimal state of charge. It switches to a maintenance mode when the battery is full, preventing overcharge and sulfation commonly caused by simple trickle chargers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAutomatic multi-stage charging that reduces float voltage when full\u003c\/li\u003e\n  \u003cli\u003eContinuous voltage monitoring via ISM microcontroller\u003c\/li\u003e\n  \u003cli\u003ePrevents overcharging and minimizes battery deterioration over time\u003c\/li\u003e\n  \u003cli\u003eSuitable for seasonal storage of motorcycles and recreational vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use the same charger for lead-acid and lithium batteries?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the Battery Tender Junior supports both lead-acid types (flooded, AGM, gel) and LiFePO4 lithium batteries. A push-button switch selects the correct charge profile so batteries receive the appropriate voltage and charging behavior for their chemistry.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSimple push-button to toggle between lead-acid and lithium modes\u003c\/li\u003e\n  \u003cli\u003eCharge algorithm adapts to battery chemistry for safe charging\u003c\/li\u003e\n  \u003cli\u003ePrevents incorrect charging by requiring mode selection before full current flow\u003c\/li\u003e\n  \u003cli\u003eWorks with a wide range of 12V powersport battery types\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety features prevent accidents or installation errors?\u003c\/h3\u003e\n\n\u003cp\u003eThe Junior includes several built-in protections that make it safe for hobbyists and non-professional users. It’s spark-proof on connection, detects reverse polarity, and will not deliver current until a valid, secure connection is made.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSpark-proof lead connection to reduce ignition risk\u003c\/li\u003e\n  \u003cli\u003eAutomatic reverse-polarity detection prevents harmful hookups\u003c\/li\u003e\n  \u003cli\u003eETL US\/CSA, FCC, ICES, and BC certified for safety compliance\n  \u003c\/li\u003e\n  \u003cli\u003eLightweight, IP-resistant enclosure for everyday garage and shop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use the Battery Tender Junior on and off the vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eThe charger is built for convenience: compact, lightweight, and simple to operate with basic connectors included. It can be left connected for extended maintenance periods and is small enough to store in limited spaces.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompact design fits in small storage areas and on shelves\u003c\/li\u003e\n  \u003cli\u003eIncludes terminals and a harness for quick connection and removal\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play operation with minimal user adjustments required\u003c\/li\u003e\n  \u003cli\u003eLow maintenance — ideal for owners who prefer set-and-forget care\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Battery Tender Junior 12V 800mA is aimed at powersports owners who need a reliable, easy-to-use maintenance charger: motorcycle and scooter riders, ATV\/UTV enthusiasts, boaters with 12V systems, and anyone who stores vehicles seasonally. It’s best for routine maintenance and preserving battery health rather than rapid jump-starting; choose it when you want a safe, certified, and low-profile charger that protects battery life over months off the road.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this charger work with LiFePO4 batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Use the push-button to select the lithium (LiFePO4) mode before charging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave it connected all winter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It's designed for long-term maintenance and will switch to float mode when full.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67587117580473,"sku":"B06X9GGNZC","price":104.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-junior-front-view_3c14c3c6-82e1-4b03-9975-1759c3700bad.jpg?v=1790499996"},{"product_id":"battery-tender-junior-12v-750ma-smart-charger-maintainer-for-motorcycle-atv-4-stage-automatic-compact","title":"Battery Tender Junior 12V 750mA Smart Charger \u0026 Maintainer for Motorcycle\/ATV — 4‑Stage Automatic, Compact","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender Junior 12V 750mA is an automatic smart charger and maintainer that safely charges and preserves 12V powersports batteries without overcharging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSmall but sophisticated, the Battery Tender Junior delivers a complete 4-step charging routine optimized for 12V lead-acid batteries — including flooded, AGM, and gel types — then switches to a float mode to maintain proper voltage during storage. Designed for motorcycles, ATVs, scooters, lawn equipment, and other powersports vehicles, this compact unit combines spark-proof connection protection, reversed-hookup detection, and LED status indicators to give you reliable battery care with minimal effort.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this charger protect and extend my battery’s life?\u003c\/h3\u003e\n\u003cp\u003eThe Battery Tender Junior uses a controlled 4-stage charge sequence (Initialization, Bulk, Absorption, Float) that brings batteries to full charge without the continuous overcurrent typical of trickle chargers. Once the battery reaches optimal voltage, the unit shifts to a low-maintenance float mode that keeps the battery ready without stressing cells.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4-step charging prevents under- or overcharging for safer long-term storage\u003c\/li\u003e\n  \u003cli\u003eCompatible with flooded, AGM, and gel lead-acid batteries\u003c\/li\u003e\n  \u003cli\u003eAutomatic return to full charge if voltage drops under load\u003c\/li\u003e\n  \u003cli\u003eSpark-proof circuitry and reverse-polarity detection reduce connection risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is it to connect and monitor the Battery Tender Junior?\u003c\/h3\u003e\n\u003cp\u003eSet-up is straightforward: use the included alligator clips for quick hook-up or the fused-ring terminal harness for permanently installed batteries. A two-color LED provides an instant readout of charging progress and float status, so you always know whether the battery is charging or maintained.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-foot output cord for flexible placement\u003c\/li\u003e\n  \u003cli\u003eLED shows charging vs. fully charged\/float state\u003c\/li\u003e\n  \u003cli\u003eAutomatic detection prevents charging after reversed hook-up\u003c\/li\u003e\n  \u003cli\u003eCompact 3.3 x 1.3 x 2.4-inch housing fits small storage areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories and support come with the charger?\u003c\/h3\u003e\n\u003cp\u003eThe package contains everything needed to start using the charger immediately: the 12V, 750mA charger, a fused-ring terminal harness for hard-to-reach batteries, and alligator clip cables for temporary connections. Battery Tender backs the product with a 5-year warranty and lifetime customer support, giving extra confidence in long-term ownership.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFused-ring terminal harness for secure, semi-permanent installations\u003c\/li\u003e\n  \u003cli\u003eAlligator clips for portable use on different vehicles\u003c\/li\u003e\n  \u003cli\u003e5-year warranty plus lifetime customer support\u003c\/li\u003e\n  \u003cli\u003eLightweight — about 1 lb for easy storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work for my motorcycle, ATV, or stored equipment?\u003c\/h3\u003e\n\u003cp\u003eThe Junior 750mA output is tailored for smaller 12V powersports batteries and routine maintenance charging during off-season storage. It is not intended as a rapid starter for dead or very large batteries, but excels at long-term maintenance and keeping batteries at ideal voltage between rides.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBest for motorcycles, scooters, ATVs, snowmobiles, and lawn equipment\u003c\/li\u003e\n  \u003cli\u003eNot a high-current jump starter for deeply discharged large batteries\u003c\/li\u003e\n  \u003cli\u003eIdeal for seasonal storage and infrequent-use vehicles\u003c\/li\u003e\n  \u003cli\u003eAdaptive charging resumes if voltage drops under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Battery Tender Junior 12V 750mA charger is aimed at riders and small-vehicle owners who want a dependable, low-effort way to maintain 12V lead-acid batteries between uses. If you store a motorcycle, ATV, lawn tractor, or other powersport vehicle for weeks or months at a time and want to avoid battery degradation, this compact smart charger offers automatic protection, easy connections, and clear status indication without the complexity of larger chargers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this charger safely stay connected long-term?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Battery Tender Junior switches to float mode after charging and can remain connected to maintain battery voltage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it charge an AGM or gel battery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit is compatible with flooded, AGM, and gel lead-acid 12V batteries using its 4-step charging program.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67587124527289,"sku":"B000CITK8S","price":100.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-junior-front-view_ae4e68b0-fbf9-4512-bca9-8d0c4fa123ea.jpg?v=1790500319"},{"product_id":"battery-tender-8v-battery-charger-and-maintainer-junior-1-25a-compact-automatic-charger-with-float-mode","title":"Battery Tender 8V Battery Charger and Maintainer — Junior 1.25A Compact Automatic Charger with Float Mode","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender Junior 8V, 1.25 AMP is a compact, fully automatic charger and maintainer designed to safely charge and preserve 8V lead-acid batteries for cars, motorcycles, ATVs, and other small vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis small but smart charger brings a full charging cycle and an automatic float mode to keep 8V batteries at optimal voltage without overcharging. It supports flooded, AGM, and gel batteries and includes safety features such as spark-proof connections and reverse-hookup detection. Lightweight and easy to use, the unit is suited for seasonal storage and routine battery upkeep.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Battery Tender Junior protect my battery during storage?\u003c\/h3\u003e\n\n\u003cp\u003eThe Battery Tender Junior finishes with a float mode that holds the battery at a safe, maintenance voltage once it’s fully charged. If the battery voltage drops, the charger automatically resumes full charging to restore proper charge, preventing deep discharge damage over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAutomatic float mode prevents overcharging during long-term storage\u003c\/li\u003e\n  \u003cli\u003eAdaptive charging restarts if voltage falls under load\u003c\/li\u003e\n  \u003cli\u003eSolid-state two-color LED shows charge state at a glance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this charger compatible with my 8V battery type?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the Battery Tender Junior is designed for all common 8V lead-acid battery chemistries, including flooded, AGM, and gel cell designs. Its four-step charging program optimizes charging for different battery conditions to preserve capacity and extend usable life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorks with 8V flooded, AGM, and gel batteries\u003c\/li\u003e\n  \u003cli\u003eUses a 4-step program: initialization, bulk charge, finishing, float\u003c\/li\u003e\n  \u003cli\u003eSmarter than a simple trickle charger for healthier batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and usability features does it offer?\u003c\/h3\u003e\n\n\u003cp\u003eThe unit prioritizes user safety and convenience with spark-proof circuitry, automatic reverse-hookup detection, and a compact, lightweight case that’s easy to position. Certified to relevant safety standards, it includes both alligator clips and ring-terminal connections for flexibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSpark-proof design reduces accidental sparks during hookup\u003c\/li\u003e\n  \u003cli\u003eReverse polarity protection prevents incorrect connections\u003c\/li\u003e\n  \u003cli\u003eIncludes ring terminal and alligator clip combo cable for varied setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and easy to install is the Battery Tender Junior?\u003c\/h3\u003e\n\n\u003cp\u003eAt roughly 4.4 x 2.2 x 2.9 inches and 0.7 lb, this charger is highly portable and simple to mount or tuck into storage areas. It plugs into a standard AC outlet and connects to the battery via the supplied cable, making it straightforward for hobbyists and professionals to use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompact dimensions and lightweight for easy carrying\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play operation with clear LED charge indicator\u003c\/li\u003e\n  \u003cli\u003eIncludes instruction manual and lifetime customer support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Battery Tender Junior 8V, 1.25 AMP is ideal for motorcycle and small-vehicle owners, hobbyists who store seasonal equipment, fleet managers maintaining standby vehicles, and anyone who wants a reliable, low-maintenance charger to extend battery life. It’s a convenient solution when you need an automatic, safety-minded charger that’s small enough to keep in a garage or toolbox yet smart enough to protect your battery investment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the Battery Tender Junior charge AGM and gel 8V batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It supports 8V flooded, AGM, and gel cell batteries with a four-step charging program optimized for these chemistries.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it overcharge my battery if left connected long-term?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. After fully charging, it switches to float mode to maintain safe voltage and prevent overcharging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67587188555961,"sku":"B00VGO28CW","price":104.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-junior-front-view_da67ded4-7b49-4ece-98c1-7f117d7fe3e5.jpg?v=1790501466"},{"product_id":"battery-tender-12v-6v-load-tester-100a-50a-portable-battery-starter-diagnostic-color-coded-analog-meter","title":"Battery Tender 12V\/6V Load Tester — 100A\/50A Portable Battery \u0026 Starter Diagnostic, Color‑Coded Analog Meter","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender 026-0020 is a portable load tester that checks 12V batteries at 100 amps or 6V batteries at 50 amps and measures starter motor draw for basic charging-system troubleshooting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for automotive and marine use, this compact handheld device lets you evaluate battery condition under load and get a quick read on whether a battery, starter or charging circuit needs further service. The clear, color-coded display and heavy-duty clamps make it straightforward to operate at the shop or in the driveway. It supports starter and deep-cycle batteries for cars, trucks, motorcycles, ATVs, RVs and boats up to approximately 1,000 cranking amps.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Battery Tender load tester evaluate battery condition?\u003c\/h3\u003e\n\u003cp\u003eThe tester applies a controlled high-current load to simulate real-world starting conditions and then reports the voltage response on a color-coded scale. This helps distinguish a weak battery from other electrical issues by showing how voltage falls under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplies 100A load for 12V batteries and 50A for 6V batteries\u003c\/li\u003e\n  \u003cli\u003eColor-coded analog readout for quick pass\/fail assessment\u003c\/li\u003e\n  \u003cli\u003eSingle toggle switch to select test and view meter\u003c\/li\u003e\n  \u003cli\u003eSuitable for starter or deep-cycle battery chemistries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan it test starter draw and help diagnose charging problems?\u003c\/h3\u003e\n\u003cp\u003eYes — besides load testing a battery, you can use the unit to observe starter motor draw and gather clues about the alternator and charging system. The tester’s load behavior combined with resting and charging voltage readings helps you decide if the starter, battery, or charging components require further inspection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure starter draw indirectly by observing voltage sag during load\u003c\/li\u003e\n  \u003cli\u003eCompare pre- and post-load voltages for charging assessment\u003c\/li\u003e\n  \u003cli\u003eUseful as part of a charging-system diagnostic routine\u003c\/li\u003e\n  \u003cli\u003eNot a replacement for professional bench testing when advanced analysis is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and usability features does it have for field use?\u003c\/h3\u003e\n\u003cp\u003eThe tester includes insulated, color-coded clamps and a rubber-housed carrying handle to make routine checks safer and easier to hold during use. The analog display is marked with colored zones to speed interpretation, and the heavy-gauge clamps help maintain a secure connection to the battery posts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRubber-insulated carrying handle for safer handling and transport\u003c\/li\u003e\n  \u003cli\u003eColor-coded heavy-duty alligator clamps for clear polarity and durable contact\u003c\/li\u003e\n  \u003cli\u003eSimple single-switch operation—no complicated menus\u003c\/li\u003e\n  \u003cli\u003eRugged construction for garage and outdoor environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use it for 12V versus 6V batteries?\u003c\/h3\u003e\n\u003cp\u003eSelect the appropriate test setting by following the device instructions and connect clamps to the correct polarity. For 12V systems the tester provides up to a 100A load; for 6V systems the maximum test load is 50A — both are intended to stress the battery briefly to reveal performance under starting conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm battery voltage (6V or 12V) before testing\u003c\/li\u003e\n  \u003cli\u003eAttach clamps to clean battery terminals—red to positive, black to negative\u003c\/li\u003e\n  \u003cli\u003eActivate the toggle switch to apply the load and observe the colored meter\u003c\/li\u003e\n  \u003cli\u003eInterpret results with respect to voltage drop and recovery after load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Battery Tender load tester is aimed at home mechanics, small repair shops, boat owners and powersports enthusiasts who need a fast, portable way to screen battery health and starter performance. It’s best used as a first-line diagnostic tool to identify weak or failing batteries and to flag potential starter or charging-system issues before investing in deeper bench testing or component replacement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this tester handle both 6V and 12V batteries?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It performs 100A load tests on 12V batteries and 50A load tests on 6V batteries.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is it safe to use on my car or boat battery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, when used per instructions. It has insulated grips and color-coded clamps for safe connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67587284435129,"sku":"B089GZ3DHZ","price":112.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-front-panel.jpg?v=1790504245"},{"product_id":"battery-tender-25-foot-sae-extension-cable-25ft-quick-disconnect-charger-extension-for-motorcycle-car-atv-long-reach-conveni","title":"Battery Tender 25-Foot SAE Extension Cable — 25ft Quick-Disconnect Charger Extension for Motorcycle, Car \u0026 ATV, Long-Reach Conveni","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender’s 25-foot SAE extension cable adds 25 feet of quick-disconnect reach to compatible Battery Tender chargers for easier, worry-free charging of vehicles parked away from outlets.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis long-reach SAE adapter gives you the flexibility to place your charger in a garage, workshop, or inside a house while keeping the battery connection on a motorcycle, car, ATV, or other equipment. Built to work with many Battery Tender charger models, the 25-foot harness eliminates awkward cable routing and lets you maintain and charge batteries without moving the vehicle or charger.\u003c\/p\u003e\n\n\u003ch3\u003eWhich chargers and batteries work with this 25-foot extension?\u003c\/h3\u003e\n\u003cp\u003eThe extension is designed for Battery Tender chargers that use standard SAE quick-disconnect plugs, such as Junior, Plus, and multi-bank units (2-, 4-, 5-, and 10-bank models). It is not compatible with Battery Tender models that use white quick-disconnect plugs, hard-wired alligator clips, or 6-volt Battery Tender Plus units. Verify your charger’s connector style before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Battery Tender Junior, Plus, and 2\/4\/5\/10-bank chargers\u003c\/li\u003e\n  \u003cli\u003eNot compatible: models with white quick-disconnect plugs\u003c\/li\u003e\n  \u003cli\u003eNot for use with hard-wired clip-only chargers\u003c\/li\u003e\n  \u003cli\u003eCheck your charger connector shape and color before attaching\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the quick-disconnect feature simplify charging?\u003c\/h3\u003e\n\u003cp\u003eThe quick-disconnect design makes daily use and storage much easier: attach the SAE plug to your vehicle and leave it in place; then plug in the charger when needed without crawling around the vehicle. This reduces wear on exposed clips and makes seasonal or maintenance charging fast and convenient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAttach once to the vehicle, then connect the charger quickly\u003c\/li\u003e\n  \u003cli\u003eReduces repeated clip-on\/cut-off wear to battery terminals\u003c\/li\u003e\n  \u003cli\u003eHelps keep connections clean and accessible in storage\u003c\/li\u003e\n  \u003cli\u003eSaves time when charging multiple vehicles sequentially\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this extension affect charging performance or safety?\u003c\/h3\u003e\n\u003cp\u003eWhen used with compatible Battery Tender chargers, the extension maintains safe charging performance across its length; it’s engineered for low voltage drop and reliable contact. Always follow the charger’s instructions for ambient temperature, ventilation, and correct connector use to ensure safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to preserve proper charge delivery when paired correctly\u003c\/li\u003e\n  \u003cli\u003eUse only with recommended Battery Tender models to avoid incompatibility\u003c\/li\u003e\n  \u003cli\u003eAvoid pinched or frayed routing to maintain safety and conductivity\u003c\/li\u003e\n  \u003cli\u003eStore cable neatly to prevent kinks and connector damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are practical ways to use a 25-foot lead around my garage or property?\u003c\/h3\u003e\n\u003cp\u003eThe extra length lets you keep the charger near a power outlet while the vehicle sits inside a garage, across a driveway, or on a trailer. It also enables centralized charging for multiple vehicles when paired with a multi-bank charger or multiple quick-disconnect harnesses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRoute cable through a garage door gap without moving the vehicle\u003c\/li\u003e\n  \u003cli\u003eCharge bikes parked on lifts or away from outlets\u003c\/li\u003e\n  \u003cli\u003eUse with multi-bank chargers for a central charging station\u003c\/li\u003e\n  \u003cli\u003eKeep the charger indoors for weather protection while charging outside\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Battery Tender 25-foot SAE extension cable suits mechanics, hobbyists, fleet owners, and anyone who needs flexible charging access for motorcycles, cars, ATVs, snowmobiles, or lawn equipment. It’s ideal if your outlet is far from the vehicle or you want to leave a quick-disconnect on the battery for fast, repeatable charging without repositioning vehicles or running unsafe temporary wiring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 25ft Battery Tender extension compatible with all Battery Tender chargers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It works with Battery Tender units using standard SAE quick-disconnects (Junior, Plus, multi-bank models) but not with chargers using white plugs, hard-wired clips, or 6V Plus models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the quick-disconnect attached to my vehicle year-round?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The SAE quick-disconnect is meant to stay attached for convenience, but inspect periodically for corrosion and keep the connector cover closed when not charging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67588751392953,"sku":"B000FW2MWW","price":78.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-front-packaging-25ft-extension.jpg?v=1790523970"},{"product_id":"battery-tender-charging-adapter-male-081-0069-5-compact-plug-for-secure-low-resistance-connections","title":"Battery Tender charging adapter (male) 081-0069-5 — compact plug for secure, low-resistance connections","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender Battery Charg Adapt Male (MfrPartNo 081-0069-5) is a compact male charging adapter that lets you connect Battery Tender chargers to compatible battery ports quickly and securely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a straightforward accessory for the Battery Tender family of chargers, this male adapter provides a reliable electrical connection when the original terminal interface doesn’t match your battery or vehicle hookup. It’s sold new for retail customers and labeled under manufacturer part number 081-0069-5. Lightweight and simple to use, the adapter is intended to streamline charging tasks for motorcycles, ATVs, lawn equipment, and other small vehicles that accept a male-style charger plug.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter make connecting a charger easier?\u003c\/h3\u003e\n\u003cp\u003eThe adapter creates a direct, low-resistance link between a Battery Tender charger and a battery or harness that accepts a male plug. That reduces the need for improvising with clamps or temporary connections and helps maintain consistent charging. It’s a plug-and-play solution for matching connector types without rewiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides a secure male connection for compatible Battery Tender chargers\u003c\/li\u003e\n  \u003cli\u003eMinimizes voltage drop with a properly sized contact\u003c\/li\u003e\n  \u003cli\u003eAvoids ad-hoc clamp setups that can be loose or unsafe\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my charger and vehicle or battery?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on matching the adapter’s male plug style to the mating socket on your battery harness or accessory. This part is intended as a direct accessory for Battery Tender systems and is most useful when you already own a charger from the same brand. Check your battery or vehicle’s connector type before purchase to ensure a proper fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for use with Battery Tender chargers and compatible sockets\u003c\/li\u003e\n  \u003cli\u003eVerify connector shape and pin size against your device\u003c\/li\u003e\n  \u003cli\u003eMay be used with motorcycle, ATV, lawn, and similar equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and use the Battery Tender male adapter safely?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally straightforward: align the male plug with the corresponding female socket, insert fully, and confirm a snug connection. Always disconnect power before making or breaking connections and consult your charger’s manual for any model-specific instructions. Avoid forcing the plug if it doesn’t seat smoothly to prevent damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn off the charger before connecting or disconnecting\u003c\/li\u003e\n  \u003cli\u003eInsert the male plug straight into the matching socket until it seats\u003c\/li\u003e\n  \u003cli\u003eInspect contacts for corrosion and clean before use for best performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in terms of durability and care?\u003c\/h3\u003e\n\u003cp\u003eThis adapter is built for regular, light-to-moderate use typical of seasonal charging tasks. Protect it from prolonged exposure to water, salt, and extreme temperatures to extend life, and store it with your charger when not in use. Periodic visual checks will help you catch wear or corrosion early.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStore indoors to reduce exposure to weathering\u003c\/li\u003e\n  \u003cli\u003eWipe contacts clean if dirt or corrosion appears\u003c\/li\u003e\n  \u003cli\u003eReplace if contacts become loose or visibly damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Battery Tender male charging adapter is aimed at vehicle owners and maintenance enthusiasts who already use Battery Tender chargers and need a compatible male plug for occasional charging tasks. It’s suitable for motorcycle riders, powersports owners, lawn and garden equipment users, or anyone needing a reliable accessory to bridge connector types without altering existing wiring. If you require a ruggedized, waterproof connector for harsh outdoor use, consider looking for a sealed adapter variant or a model specified for heavy-duty environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this adapter compatible with all Battery Tender chargers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many Battery Tender models but compatibility depends on the charger’s plug type—verify connector shape and size first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave this adapter connected outdoors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Avoid leaving it exposed to weather; store indoors and protect from moisture and salt to maintain performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67588861886649,"sku":"B003CJ927I","price":79.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-male-adapter-front-view.jpg?v=1790526693"},{"product_id":"battery-tender-lcd-voltage-indicator-sae-quick-disconnect-with-usb-a-usb-c-charging-dual-ports-real-time-battery-readout","title":"Battery Tender LCD Voltage Indicator SAE Quick-Disconnect with USB-A \u0026 USB-C Charging — Dual Ports, Real-Time Battery Readout","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender’s 081-0159 quick-disconnect pairs a live LCD battery voltage readout with dual full-power USB-A and USB-C charging from a single SAE plug.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact accessory plugs into any SAE-compatible lead to give you a continuous on-screen battery voltage reading while also providing simultaneous USB-A (QC 3.0) and USB-C power for phones, tablets, and accessories. Designed for motorcycles, ATVs, snowmobiles, lawn equipment, and other 12V battery systems, it keeps you informed about battery health and keeps devices charged without removing the main SAE connection.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the LCD voltage indicator help me monitor my battery?\u003c\/h3\u003e\n\u003cp\u003eThe bright LCD shows real-time voltage so you can quickly assess the battery’s state without additional tools. It updates continuously when connected, making it easy to spot low-voltage conditions or confirm charging activity while accessories are connected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDigital numeric display for instant voltage reading\u003c\/li\u003e\n  \u003cli\u003eMounts inline with SAE quick-disconnect harnesses\u003c\/li\u003e\n  \u003cli\u003eUseful on storage or after riding to verify resting voltage\u003c\/li\u003e\n  \u003cli\u003eNo extra meters or clamps required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I charge two devices at once, and how much power is available?\u003c\/h3\u003e\n\u003cp\u003eYes — both USB ports can deliver their full rated output simultaneously without power sharing, so you can charge two devices at maximum supported currents. USB-A follows QC 3.0 profiles and USB-C offers USB Power Delivery compatible currents for faster charging of modern devices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUSB-A (QC 3.0): 5V\/3A, 9V\/2A, 12V\/1.5A\u003c\/li\u003e\n  \u003cli\u003eUSB-C: 5V\/3A, 9V\/2.22A, 12V\/1.67A\u003c\/li\u003e\n  \u003cli\u003eBoth ports usable at full load simultaneously\u003c\/li\u003e\n  \u003cli\u003eUp to ~3A per port depending on voltage profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and use the quick-disconnect on my vehicle?\u003c\/h3\u003e\n\u003cp\u003eInstallation is plug-and-play: connect the Battery Tender adapter into your SAE lead and run your device cables from the USB ports. The unit sits inline so you can leave it attached for monitoring and charging whenever the SAE connection is present.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlugs into any standard SAE quick-disconnect harness\u003c\/li\u003e\n  \u003cli\u003eNo tools needed for common installations\u003c\/li\u003e\n  \u003cli\u003eIdeal for permanent or semi-permanent mounting on vehicles with SAE connectors\u003c\/li\u003e\n  \u003cli\u003eCan remain connected while the vehicle is parked or in use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this affect my vehicle’s electrical system or accessories?\u003c\/h3\u003e\n\u003cp\u003eThe adapter draws power directly from the 12V battery through the SAE connection; it’s engineered to provide device charging without interfering with other circuits when used properly. As with any accessory, ensure the total load stays within the vehicle’s electrical limits and disconnect when servicing the battery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses standard SAE connection to integrate with existing wiring\u003c\/li\u003e\n  \u003cli\u003eDesigned for typical accessory charging loads, not heavy-draw systems\u003c\/li\u003e\n  \u003cli\u003eMonitor voltage to detect abnormal battery drain\u003c\/li\u003e\n  \u003cli\u003eDisconnect before performing electrical work on the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: Riders and owners who want a simple, reliable way to watch battery voltage and charge modern USB devices from a single SAE connection. It’s especially useful for weekend riders, commuters, and anyone who keeps devices charged on the go while preserving an SAE quick-disconnect for battery tenders and maintenance accessories.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the LCD work while charging devices?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The LCD displays real-time battery voltage continuously even while both USB ports are charging.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are both USB ports full-power at the same time?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. USB-A and USB-C can each deliver their full rated output simultaneously without power sharing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67588973887673,"sku":"B0DSLZ3K6G","price":77.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-081-0159-front-connector.jpg?v=1790528782"},{"product_id":"battery-tender-obd-ii-adapter-cable-22-inch-sae-to-obdii-charge-lead-3a-solar-compatible","title":"Battery Tender OBD-II Adapter Cable, 22-inch SAE to OBDII Charge Lead — 3A Solar-Compatible","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender OBDII Adapter Cable is a 22-inch, 3-amp connector that lets you safely charge and maintain a vehicle's 12V battery through the OBD-II port, and it works with solar or traditional Battery Tender chargers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact adapter converts a standard SAE quick-disconnect to an OBD-II plug, giving you an easy, secure way to keep a car, motorcycle, ATV, or powersport battery topped off without removing terminals. Built for routine maintenance rather than heavy-duty jump starts, the cable is ideal for long-term storage, seasonal vehicles, and daily drivers that benefit from periodic trickle charging. The design balances reach and durability while preserving compatibility with Battery Tender and most other SAE-equipped charging systems.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter simplify charging a parked vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eInstead of attaching clamps to battery posts or accessing batteries in awkward locations, the OBD-II adapter plugs into the vehicle diagnostics socket—usually under the dash—so you can provide charge safely and discreetly. That makes it faster to set up and reduces corrosion risk from repeated terminal handling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e22-inch cord gives convenient reach from charger to OBD-II port\u003c\/li\u003e\n  \u003cli\u003eSAE quick-disconnect fits common Battery Tender and SAE chargers\u003c\/li\u003e\n  \u003cli\u003eOBD-II connection avoids direct battery terminal contact\u003c\/li\u003e\n  \u003cli\u003eCompact plug stores easily inside the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with solar panels and low-current chargers?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the adapter supports low-current charging and is rated for a steady 3 amps, making it compatible with solar trickle chargers and maintenance-mode units. It’s designed to allow gentle top-off charging that maintains battery health over time rather than rapid high-current charging.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e3A output suitable for trickle and maintenance charging\u003c\/li\u003e\n  \u003cli\u003eSolar-compatible for off-grid or outdoor charging setups\u003c\/li\u003e\n  \u003cli\u003eWorks with most SAE-equipped Battery Tender models and similar chargers\u003c\/li\u003e\n  \u003cli\u003eNot intended for jump-starting dead batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this adapter safe for modern vehicles and electronics?\u003c\/h3\u003e\n\n\u003cp\u003eThe Battery Tender OBDII Adapter Cable is built to respect vehicle electrical systems by delivering low, steady current through the designated diagnostic port rather than direct battery terminals. Using the OBD-II port minimizes exposure to sparks and reduces the risk of incorrect clamp placement, but you should always follow vehicle manufacturer recommendations before charging through the OBD-II socket.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLow 3A output lowers risk to vehicle electronics\u003c\/li\u003e\n  \u003cli\u003eConnector keyed to standard OBD-II sockets for secure fit\u003c\/li\u003e\n  \u003cli\u003eShort, durable cable reduces strain and wear\u003c\/li\u003e\n  \u003cli\u003eFollow charger and vehicle instructions for safe use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and easy to install is the cable?\u003c\/h3\u003e\n\n\u003cp\u003eThe 22-inch cable balances flexibility and strength so you can route it from the charger to the port without kinks or stretching. Installation is plug-and-play: attach the SAE quick-disconnect to your charger, plug the OBD-II end into the vehicle port, and begin charging. When finished, simply disconnect and stow the cable.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRobust 22-inch insulation resists abrasion and bending\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play SAE and OBD-II connectors for quick setup\u003c\/li\u003e\n  \u003cli\u003eCompact form stores inside glovebox or tool kit\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance — wipe clean and inspect periodically\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Battery Tender OBDII Adapter Cable is aimed at vehicle owners who want an easier, safer way to maintain 12V batteries without removing terminals—especially owners of cars, motorcycles, ATVs, RVs, and seasonal vehicles. It's particularly useful for people who use solar trickle chargers or Battery Tender maintenance chargers, and for anyone who prefers a neat, low-profile charging solution that preserves battery life and reduces terminal wear.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this adapter with any Battery Tender charger?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it connects to most Battery Tender and SAE-equipped chargers that use a quick-disconnect, provided the charger outputs appropriate low current.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cable suitable for jump-starting a dead battery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This 3A OBD-II adapter is for maintenance and trickle charging, not for high-current jump-starting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67589562761401,"sku":"B007KJ2RZK","price":79.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-obdii-adapter-front-view.jpg?v=1790530829"},{"product_id":"battery-tender-sae-extension-cable-12-5-ft-12-foot-quick-disconnect-charger-extension-for-motorcycles-cars-atvs","title":"Battery Tender SAE Extension Cable 12.5 ft — 12-Foot Quick-Disconnect Charger Extension for Motorcycles, Cars, ATVs","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender's 12.5-foot SAE extension cable lengthens the reach of compatible Battery Tender chargers so you can connect and charge batteries from a greater distance without moving the charger.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis extension lead is built to expand where you place your Battery Tender charger by adding roughly 12 feet (12.5') of SAE quick-disconnect wiring between the charger and the vehicle battery. It’s a straightforward accessory for motorcycle, ATV, car and small-vehicle owners who need more flexibility in where the charger sits while maintaining the charger’s quick-connect convenience.\u003c\/p\u003e\n\n\u003ch3\u003eWhere will this extension cable make charging easier?\u003c\/h3\u003e\n\u003cp\u003eUse this cable when the charger and battery aren’t close together or when you want to keep the charger in a dry, accessible spot while the vehicle stays parked elsewhere. It helps avoid moving the charger repeatedly and permits charging in garages, basements, or on a workbench while the vehicle is outdoors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdds roughly 12 feet of reach for easier charger placement.\u003c\/li\u003e\n  \u003cli\u003eKeeps the charger in a safer, dry location away from the battery.\u003c\/li\u003e\n  \u003cli\u003eSimplifies charging multiple vehicles with different storage positions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Battery Tender models is this extension compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe 12.5' SAE extension works with most Battery Tender models that use the standard SAE quick-disconnect plug. It pairs with Junior, Plus, 2-Bank, 4-Bank, 5-Bank and 10-Bank units that have the matching SAE connector.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Battery Tender Junior and Plus models that use SAE quick-disconnects.\u003c\/li\u003e\n  \u003cli\u003eCompatible with multi-bank chargers (2, 4, 5, 10 banks) using SAE plugs.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with hard-wired clip versions or units that use white quick-disconnect plugs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and daily use?\u003c\/h3\u003e\n\u003cp\u003eThe cable uses Battery Tender’s quick-disconnect SAE connectors so installation is a plug-in action — no special tools required. That allows you to connect the charger and leave it attached until charging is complete or detach quickly when needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick-disconnect SAE plugs for a tool-free connection.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play design supports routine, unattended charging.\u003c\/li\u003e\n  \u003cli\u003eDurable construction designed for repeated connect\/disconnect cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there other length or pack options if I need more cables?\u003c\/h3\u003e\n\u003cp\u003eYes. Battery Tender offers this extension in other lengths and multipacks so you can pick the configuration that best suits your storage layout or multiple vehicles. Options include 6-foot and 25-foot lengths, plus multipacks for charging several batteries at once.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAvailable in 6-foot and 25-foot lengths for shorter or longer runs.\u003c\/li\u003e\n  \u003cli\u003eMultipacks (for example, packs of 4) for multi-vehicle setups.\u003c\/li\u003e\n  \u003cli\u003eChoose the length that keeps your charger safely positioned while reaching the battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Battery Tender 12.5-foot SAE extension cable is ideal for motorcycle, ATV, car and small-vehicle owners who already use Battery Tender chargers with SAE quick-disconnects and need more flexibility in charger placement. It's a practical accessory for hobbyists, mechanics, garage keepers and anyone who wants to keep chargers in a dry, accessible spot while charging batteries located away from that space.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this extension with all Battery Tender chargers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use it only with Battery Tender units that have the standard SAE quick-disconnect; not compatible with hard-wired clip models or white quick-disconnect plugs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much extra length does the cable add?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This extension adds about 12.5 feet of reach between your charger and the battery for more flexible placement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67592366555321,"sku":"B002DU3TTO","price":54.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-front-connector-view.jpg?v=1790563224"},{"product_id":"battery-tender-quick-disconnect-usb-charger-adapter-2-1a-12v-sae-for-motorcycle-atv-camping","title":"Battery Tender Quick Disconnect USB Charger Adapter - 2.1A 12V SAE for Motorcycle, ATV \u0026 Camping","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender Quick Disconnect USB Charger Adapter converts a 12V battery connection into a convenient 2.1A USB outlet for charging phones, tablets, GPS units, and other USB devices on the go.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're riding a motorcycle, driving an ATV, taking a golf cart to the course, or camping off-grid, this compact adapter gives you reliable USB power from any 12V battery using the SAE quick-disconnect standard. Built for frequent outdoor use, the adapter pairs with a Battery Tender ring terminal accessory cable (sold separately) to provide a secure, weather-resistant charge point without modifying your vehicle's wiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the adapter keep my devices charged when I'm away from shore power?\u003c\/h3\u003e\n\n\u003cp\u003eThe adapter plugs into a 12V SAE quick-disconnect connection on your battery setup and delivers up to 2.1 amps of USB charging output, enough for phones, navigation units, and many small tablets. Its simple plug-and-play design means you can tap vehicle or battery power instantly without splicing wires or using bulky inverters.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e2.1A USB output suitable for smartphones and smaller tablets\u003c\/li\u003e\n  \u003cli\u003eSAE quick-disconnect input for fast, tool-free connection\u003c\/li\u003e\n  \u003cli\u003eWorks with 12V batteries on motorcycles, ATVs, golf carts, and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it withstand dusty, wet, or rough outdoor conditions?\u003c\/h3\u003e\n\n\u003cp\u003eThe adapter includes a protective USB cover to block dust, dirt, and debris when not in use, preserving clean contact surfaces for dependable charging. The compact housing and SAE connector are made to tolerate the vibration and movement common to powersports and outdoor gear, though it should be stored under shelter when exposed to heavy rain or prolonged immersion.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProtective cap keeps USB port clean in dirty environments\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists vibration from off-road use\u003c\/li\u003e\n  \u003cli\u003eDesigned for outdoor gear — avoid full water submersion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and compatibility with my vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: attach the Battery Tender ring terminal accessory cable to your 12V battery terminals (if not already present), then plug in the SAE quick-disconnect adapter. No soldering or permanent alterations required, and the adapter is compatible with most 12V systems that use standard SAE quick-connects.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play with SAE quick-disconnect sockets\u003c\/li\u003e\n  \u003cli\u003eWorks on most 12V batteries when paired with the proper ring terminal cable\u003c\/li\u003e\n  \u003cli\u003eLeaves factory wiring untouched for easy removal or transfer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat charging performance and safety features should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe adapter supplies a steady 2.1A charging current, balancing reasonable charging speed and compatibility with a wide range of devices. While it provides a secure connection and clean power transfer, it relies on your battery's condition; use a properly charged, healthy 12V battery and the recommended Battery Tender accessories for best results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e2.1A output for dependable device charging\u003c\/li\u003e\n  \u003cli\u003eSecure SAE connection minimizes accidental disconnects\u003c\/li\u003e\n  \u003cli\u003eLifetime customer support from Battery Tender for setup help\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Battery Tender Quick Disconnect USB Charger Adapter is aimed at riders, outdoor adventurers, golfers, and anyone using small 12V vehicles who needs a neat, removable USB charging point. It's ideal for people who want a low-profile, reliable way to keep phones, GPS units, cameras, and other USB devices powered without rewiring their equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this with any 12V battery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—when paired with a Battery Tender ring terminal accessory cable or an existing SAE connector, it works with most 12V batteries on bikes, ATVs, and golf carts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much current does the USB port provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The adapter supplies up to 2.1 amps via the USB port, suitable for phones, GPS units, and many small tablets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67592565620921,"sku":"B00DJ5KEF4","price":54.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-front-view-adapter.jpg?v=1790565622"},{"product_id":"battery-tender-12v-voltage-indicator-lcd-with-led-charge-status-compact-plug-in-gauge-081-0157","title":"Battery Tender 12V Voltage Indicator LCD with LED Charge Status — Compact Plug-In Gauge (081-0157)","description":"\u003cp\u003e\u003cstrong\u003eBattery Tender 081-0157 is a compact 12V voltage indicator that connects to your vehicle’s quick-disconnect and shows an accurate open-circuit battery voltage on an LCD while also giving simple go\/no-go LED guidance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep tabs on the health of any 12V battery quickly and without guesswork. This plug-in voltage indicator attaches to existing Battery Tender quick-disconnect wiring or vehicle ring terminals and, with a single button press, reports open-circuit voltage on a clear LCD screen. The built-in LED charge indicator gives an immediate green\/yellow\/red status so you can decide whether the battery is ready for use, needs charging, or requires attention.\u003c\/p\u003e\n\n\u003ch3\u003eHow accurate is the voltage reading?\u003c\/h3\u003e\n\u003cp\u003eThe tester displays open-circuit voltage between 3 and 16 volts with a resolution of ±0.1 volt, making it precise enough for routine battery checks. Readings reflect the battery’s resting voltage, which is useful for assessing state-of-charge and general condition when the vehicle is off.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLCD range: 3–16 volts\u003c\/li\u003e\n  \u003cli\u003eResolution: ±0.1 volt\u003c\/li\u003e\n  \u003cli\u003eDisplays open-circuit (resting) voltage for consistent comparisons\u003c\/li\u003e\n  \u003cli\u003eSingle-button operation reduces user error\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do the LED colors mean and when should I act?\u003c\/h3\u003e\n\u003cp\u003eThe integrated LED indicator provides quick visual guidance: green means the battery is above 12.0 volts; yellow covers 11.6–12.0 volts; red signals below 11.6 volts. Use the LEDs as a first check—green typically indicates a usable charge, while yellow or red suggests charging or further testing is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGreen: voltage greater than 12.0 V — generally ready for use\u003c\/li\u003e\n  \u003cli\u003eYellow: 11.6–12.0 V — consider charging or monitoring\u003c\/li\u003e\n  \u003cli\u003eRed: below 11.6 V — recharge and evaluate for health or load issues\u003c\/li\u003e\n  \u003cli\u003eLEDs offer instant status without reading numeric values\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and operate the Battery Tender voltage indicator?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: connect the unit to your vehicle ring terminals or the existing quick-disconnect plug and press the button to view voltage. The compact design keeps it out of the way when not in use, and the plain-language LEDs simplify quick checks for riders, drivers, and maintenance staff.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAttaches to ring terminals or quick-disconnect harnesses\u003c\/li\u003e\n  \u003cli\u003eOne-button press shows voltage on the LCD\u003c\/li\u003e\n  \u003cli\u003eCompact form fits in tight engine bays or battery compartments\u003c\/li\u003e\n  \u003cli\u003eNo specialist tools or skills required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work on different 12V battery types?\u003c\/h3\u003e\n\u003cp\u003eThe indicator reads open-circuit voltage independent of battery chemistry and is suitable for common 12V lead-acid, AGM, and similar systems. It provides a voltage snapshot useful for most routine maintenance checks but does not perform load testing or guarantee battery capacity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with standard 12V automotive and powersport batteries\u003c\/li\u003e\n  \u003cli\u003eUseful for lead-acid, AGM, and comparable 12V types\u003c\/li\u003e\n  \u003cli\u003eNot a substitute for full diagnostic or load testing\u003c\/li\u003e\n  \u003cli\u003eIdeal for quick, everyday voltage monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Battery Tender 081-0157 is ideal for vehicle owners, motorcyclists, RV and marine hobbyists, fleet managers, and anyone who wants a fast, reliable way to check a 12V battery’s open-circuit voltage. If you need a simple plug-and-read tool to confirm charge state before storage, travel, or maintenance, this indicator offers clear numeric feedback and an easy-to-read LED status without complicated setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the indicator measure while the vehicle is running?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It reads open-circuit (resting) voltage when the vehicle is off for consistent state-of-charge checks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the unit connected permanently?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed for in-line connection; occasional checks won’t affect the battery but avoid prolonged drain in fault conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67593840722105,"sku":"B00DJ5KE9A","price":59.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-front-panel-lcd.jpg?v=1790579665"},{"product_id":"battery-tender-alligator-clip-and-ring-terminal-combo-cable-20-16-gauge-7-5a-fused-charger-accessory","title":"Battery Tender Alligator Clip and Ring Terminal Combo Cable 20\" – 16‑gauge, 7.5A fused charger accessory","description":"\u003cp\u003e\u003cstrong\u003eThe Battery Tender Alligator Clip and Ring Terminal 20\" Combo Cable (081-0180) is a dual-purpose charger accessory that gives you fast, safe connections to your battery using either alligator clips or permanent ring terminals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact accessory converts a Battery Tender charger into a flexible power lead for automotive, powersports and marine batteries. With 20 inches of heavy-duty 16-gauge wire, a user-replaceable 7.5 amp inline fuse and an easy hex-wrench clip removal, the cable is built to be both convenient and protective. Whether you need temporary clips for quick battery checks or ring terminals for a semi-permanent installation, this cable removes the guesswork and keeps the charger-to-battery attachment simple and reliable.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cable make connecting a Battery Tender easier?\u003c\/h3\u003e\n\u003cp\u003eIt provides two connection methods in one compact assembly so you can choose the right attachment for the situation. The alligator clips give fast on\/off access, while the ring terminals allow a tidy, secure installation for longer-term use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20\" overall length offers reach without excess cable clutter\u003c\/li\u003e\n  \u003cli\u003eAlligator clips attach quickly for temporary charging or testing\u003c\/li\u003e\n  \u003cli\u003eRing terminals accept permanent mounting to battery posts or studs\u003c\/li\u003e\n  \u003cli\u003eHex-wrench removal lets you switch connection types in minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the cable safe to use with different battery types?\u003c\/h3\u003e\n\u003cp\u003eThe cable is designed to work across a broad range of battery types commonly used in cars, motorcycles, ATVs and boats, but always match polarity and terminal size. A 7.5 amp inline fuse protects the lead and charger from overloads and short circuits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e7.5A fuse guards against excessive current events\u003c\/li\u003e\n  \u003cli\u003e16-gauge conductors balance flexibility with solid conductivity\u003c\/li\u003e\n  \u003cli\u003eColor-coded leads help prevent polarity mistakes during hookup\u003c\/li\u003e\n  \u003cli\u003eCompatible with Battery Tender chargers and many standard battery posts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance steps should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: clip on for temporary use or remove the clips to expose ring terminals for bolted connections. Periodic checks of the fuse, clip jaws and ring terminal tightness keep the connection reliable over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a hex wrench to remove alligator clips and reveal ring terminals\u003c\/li\u003e\n  \u003cli\u003eReplace the 7.5A fuse if it blows to restore protection\u003c\/li\u003e\n  \u003cli\u003eClean battery posts and clamps before securing ring terminals\u003c\/li\u003e\n  \u003cli\u003eInspect wire insulation and clip jaws for wear every few months\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cable work with my boat\/motorcycle\/car setup?\u003c\/h3\u003e\n\u003cp\u003eYes — the 20\" length and universal clip\/ring options make it suitable for many vehicles and small craft where Battery Tender chargers are used. Check terminal sizes and amperage needs for high-demand systems before connecting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for motorcycles, ATVs, cars and marine batteries with standard post sizes\u003c\/li\u003e\n  \u003cli\u003eNot intended as a heavy-gauge cable for high-current jump-starting\u003c\/li\u003e\n  \u003cli\u003eSuits trickle charging, battery maintenance, and storage charging tasks\u003c\/li\u003e\n  \u003cli\u003eWorks seamlessly with Battery Tender chargers and similar smart chargers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for:\u003c\/strong\u003e The Battery Tender 081-0180 is aimed at riders, boat owners, DIY mechanics and anyone who wants a neat, safe way to attach a Battery Tender charger to different batteries. It’s especially useful if you alternate between temporary testing with alligator clips and a tethered, bolted connection using ring terminals. If you value a compact, protected accessory that reduces connector fiddling and adds a layer of fuse-protected safety, this combo cable is a practical shop or garage staple.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I leave the ring terminals attached permanently?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Ring terminals provide a semi-permanent, tidy connection; ensure tight mounting and periodic corrosion checks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What does the 7.5 amp fuse protect against?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The inline 7.5A fuse helps prevent damage from short circuits or excessive current during charging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Battery Tender","offers":[{"title":"Default Title","offer_id":67594500505785,"sku":"B0CP9X5WVW","price":52.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/battery-tender-front-view-with-clips.jpg?v=1790584012"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/battery-tender-front-view-with-clips.jpg?v=1790612633","url":"https:\/\/redleafauto.ca\/collections\/battery-tender.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}