{"title":"BLACKHORSE-RACING","description":"\u003cp\u003eBrowse 27 BLACKHORSE-RACING products at RedLeaf Auto, including engine cooling \u0026amp; a\/c parts, motorcycle, atv \u0026amp; snowmobile parts and fuel system parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"blackhorse-racing-110v-self-priming-oil-transfer-pump-60-l-min-550w-for-diesel-kerosene","title":"BLACKHORSE-RACING 110V Self-Priming Oil Transfer Pump — 60 L\/min (550W) for Diesel \u0026 Kerosene","description":"\u003cp\u003e\u003cstrong\u003eThe BLACKHORSE-RACING 110V self-priming oil transfer pump is a compact, electric-driven unit designed to move light fuels (diesel, kerosene, biodiesel) at up to 60 L\/min safely and reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pump combines a 550W 110V AC motor with self-priming capability to deliver steady flow for vehicle refueling, on-site equipment servicing, farm use, and construction tasks. Built for durability and straightforward maintenance, it handles light oils but should not be used with highly flammable or corrosive liquids such as gasoline, LPG, or alcohol-based fuels.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast and powerful is this pump for routine transfer jobs?\u003c\/h3\u003e\n\u003cp\u003eThe BLACKHORSE-RACING pump runs at approximately 2,800 rpm with a 550W motor, producing a flow range suitable for small- to medium-scale fuel transfers. Expect between 20–60 L\/min (about 5.25–15.75 GPM) depending on installation, suction lift, and hose diameter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNominal motor: 110V AC, 550 Watts, 60 Hz\u003c\/li\u003e\n  \u003cli\u003eSpeed: ~2,800 r\/min for consistent output\u003c\/li\u003e\n  \u003cli\u003eFlow variability: 20–60 L\/min depending on conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fluids can I safely pump with this unit?\u003c\/h3\u003e\n\u003cp\u003eThis pump is intended for light hydrocarbon fuels: diesel, kerosene, and biodiesel blends. It is not rated for low-flashpoint or reactive fluids such as gasoline, liquefied petroleum gas, or alcohols—using those can be hazardous and will void safety guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended: diesel, kerosene, biodiesel\u003c\/li\u003e\n  \u003cli\u003eNot suitable: gasoline, LPG, ethanol\/methanol\u003c\/li\u003e\n  \u003cli\u003eIdeal for moving fuel from drums, tanks, or secondary containers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install, use, and maintain on a job site?\u003c\/h3\u003e\n\u003cp\u003eInstallation and operation are straightforward: mount the unit, connect the suction and discharge hoses, plug into a standard 110V outlet, and the self-priming pump will establish flow without manual pre-filling in most setups. Routine upkeep involves visual checks, hose inspection, and occasional cleaning of inlet strainers to maintain performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelf-priming design reduces setup time\u003c\/li\u003e\n  \u003cli\u003eSimple electrical hookup to 110V AC supply\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance: hose, connection, and strainer checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety considerations and operating limits should I know?\u003c\/h3\u003e\n\u003cp\u003eOperate the pump in well-ventilated areas away from ignition sources, and use it only with compatible fuels. Do not run dry for prolonged periods; ensure hoses and fittings are secure to prevent leaks and spills. Follow all local codes for fuel handling and electrical connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAvoid exposure to open flames and sparks\u003c\/li\u003e\n  \u003cli\u003eDo not pump highly flammable or corrosive liquids\u003c\/li\u003e\n  \u003cli\u003eObserve manufacturer torque and hose specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BLACKHORSE-RACING 110V Self-Priming Oil Transfer Pump suits fleet managers, farmers, small contractors, and equipment operators who need a dependable, portable electric pump for diesel, kerosene, or biodiesel transfer. It fits scenarios where reliable flow, easy setup, and low maintenance are priorities, provided users follow fuel compatibility and safety guidelines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this pump run on 110V household power?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It uses a 110V AC, 550W motor designed for standard 110V outlets; observe local electrical safety and circuit capacity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the pump self-priming for drum-to-drum transfers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pump is self-priming and suitable for most drum-to-drum or tank transfers, though suction lift and hose layout affect prime time.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67585017282745,"sku":"B07SSHSH6H","price":246.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view.jpg?v=1790463554"},{"product_id":"blackhorse-racing-5-gallon-tire-bead-seater-145-psi-blast-tank-with-gauge-for-cars-trucks-atvs","title":"BLACKHORSE-RACING 5 Gallon Tire Bead Seater – 145 PSI Blast Tank with Gauge for Cars Trucks ATVs","description":"\u003cp\u003e\u003cstrong\u003eThe BLACKHORSE-RACING 5 Gallon Air Tire Bead Seater is a heavy-duty, 145 PSI blast tank designed to deliver a fast, reliable burst of air to seat tire beads on cars, trucks, ATVs, and agricultural wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis portable bead blaster combines a 5-gallon steel tank, an onboard pressure gauge, and an easy on\/off valve so you can charge the unit from a standard shop compressor and then release a controlled high-volume pulse to push the tire bead onto the rim. Built for garages, farms, and service trucks, it handles tires up to 24.5\" and is engineered for repeatable seating without needing high-capacity shop equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this bead seater speed up tire seating?\u003c\/h3\u003e\n\u003cp\u003eThe unit stores compressed air at up to 145 PSI and discharges it in a single, forceful blast that quickly expands the tire sidewall so the bead snaps into place. Because the tank delivers a concentrated volume of air, you get consistent seating even on stiff sidewalls.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5-gallon steel reservoir provides the volume needed for one strong blast\u003c\/li\u003e\n  \u003cli\u003eOperating charge range 87–116 PSI recommended for best results\u003c\/li\u003e\n  \u003cli\u003e145 PSI maximum working pressure for powerful discharge\u003c\/li\u003e\n  \u003cli\u003eSimple valve mechanism releases the stored air instantly when needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat controls and indicators help me use it safely and accurately?\u003c\/h3\u003e\n\u003cp\u003eThe built-in gauge gives a clear reading of tank pressure so you can fill to the recommended level from your compressor. An accessible on\/off valve prevents accidental releases and makes it easy to control when the blast occurs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy-to-read pressure gauge mounted on the tank\u003c\/li\u003e\n  \u003cli\u003eOn\/off valve for secure, immediate control of the discharge\u003c\/li\u003e\n  \u003cli\u003eFill from standard shop compressors—no special fittings required\u003c\/li\u003e\n  \u003cli\u003eRecommended charging window printed for reference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tires and situations is this bead blaster suited for?\u003c\/h3\u003e\n\u003cp\u003eThe BLACKHORSE-RACING bead seater is built for a broad range of heavy-duty applications, seating beads on passenger vehicles as well as larger rubber on trucks, tractors, and ATVs up to a 24.5\" rim. It’s particularly useful when inflating stiff or tubeless tires where a single strong pulse is needed to set the bead.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with truck, car, ATV, tractor, and commercial tires up to 24.5\"\u003c\/li\u003e\n  \u003cli\u003eReliable for both field repairs and shop use\u003c\/li\u003e\n  \u003cli\u003eCompact enough for mobile service rigs and storage in garages\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated cycles during busy repair sessions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I set up and maintain the bead seater?\u003c\/h3\u003e\n\u003cp\u003eSetup is straightforward: connect the tank to your compressor, charge to the recommended pressure range, and position the tank’s hose and nozzle against the tire sidewall. Routine maintenance is limited to keeping fittings clean, checking the gauge, and ensuring the tank and valve operate without leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCharge from a standard shop compressor to 87–116 PSI for ideal performance\u003c\/li\u003e\n  \u003cli\u003eInspect hoses, fittings, and the valve for wear before each use\u003c\/li\u003e\n  \u003cli\u003eDrain condensation and store dry to prevent corrosion\u003c\/li\u003e\n  \u003cli\u003eFollow local safety guidelines when working with pressurized vessels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BLACKHORSE-RACING 5 Gallon Air Tire Bead Seater is aimed at mechanics, fleet operators, farmers, off-road enthusiasts, and mobile tire technicians who need a reliable, portable tool for seating beads on medium to large tires. It’s a practical choice for anyone who wants a compact, repeatable way to set tire beads without relying on bulk air systems or lengthy compressor cycles.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey features at a glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSeating capability for heavy-duty tires including ATV, tractor, cars, and trucks\u003c\/li\u003e\n  \u003cli\u003eAccurate onboard air gauge for precise tank fill levels\u003c\/li\u003e\n  \u003cli\u003eOn\/off valve for controlled discharge when seating the bead\u003c\/li\u003e\n  \u003cli\u003eQuickly inflates tire sidewall to seat beads on rims up to 24.5\"\u003c\/li\u003e\n  \u003cli\u003eFill from standard compressors within the recommended 87–116 PSI charging range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWith rugged construction and straightforward controls, the BLACKHORSE-RACING bead seater delivers the concentrated airflow and simplicity required to seat tough beads safely and efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure should I charge the bead seater to?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Charge the tank between 87–116 PSI for optimal seating; the tank max is 145 PSI. Use the onboard gauge to confirm pressure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which tire sizes can this unit seat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It seats beads on tires up to 24.5\" rim diameter, suitable for cars, trucks, ATVs, and common agricultural wheels.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67585043169465,"sku":"B07SRSKJW5","price":238.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view-tank.jpg?v=1790464861"},{"product_id":"blackhorse-racing-radiator-cooling-fan-assembly-for-honda-accord-2013-2017-pack-of-2-oe-fit-pull-type-replacements","title":"BLACKHORSE-RACING Radiator Cooling Fan Assembly for Honda Accord 2013–2017 — Pack of 2, OE-fit Pull-Type Replacements","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING Pack of 2 radiator cooling fan assemblies for Honda Accord 2013–2017 provide direct-fit, pull-type replacements that restore proper radiator airflow and engine temperature control.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Accord is showing signs of overheating, erratic AC performance, or a radiator fan that runs continuously or not at all, replacing the cooling fan assembly is a common and effective repair. This twin-pack from BLACKHORSE-RACING is designed to fit Accord EX, EX-L and LX-S submodels across model years 2013–2017 and installs without modification. Each assembly follows OE fitment and matches common OEM part numbers for straightforward replacement.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this radiator cooling fan assembly improve vehicle cooling?\u003c\/h3\u003e\n\n\u003cp\u003eThe assembly pulls air through the radiator to dissipate heat from engine coolant, helping maintain safe operating temperatures during idling, slow traffic, and stop-and-go driving. Proper airflow reduces strain on the cooling system and supports consistent HVAC performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePull-type design matches original airflow direction and performance.\u003c\/li\u003e\n  \u003cli\u003eIncludes two fan assemblies for both primary and secondary cooling locations.\u003c\/li\u003e\n  \u003cli\u003eDirect OE-fit replacement avoids cutting or splicing wiring.\u003c\/li\u003e\n  \u003cli\u003eCompatible with OEM numbers like 386155A2A01 and 190155A2A01 for fit verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these assemblies fit my 2014–2017 Accord EX\/EX-L or LX-S without modifications?\u003c\/h3\u003e\n\n\u003cp\u003eYes. BLACKHORSE-RACING engineered these assemblies for direct installation on the listed Accord submodels and years. They are built to meet the same mounting points and electrical connections as the original equipment so you can reinstall using stock hardware and connectors.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOE fitment reduces installation time and complexity.\u003c\/li\u003e\n  \u003cli\u003eNo cutting, drilling, or wiring changes required.\u003c\/li\u003e\n  \u003cli\u003eDesigned to match factory mounting tabs and bolt patterns.\u003c\/li\u003e\n  \u003cli\u003eSupplied as a set of two to replace both cooling fans when needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specs and OEM cross-references I should check before buying?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm compatibility by matching your vehicle’s year, submodel, and OEM part numbers. This BLACKHORSE-RACING pack lists common replacement numbers so you can compare with your vehicle’s existing fan assembly or parts catalog.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOEM Replacement Numbers: 386155A2A01, 190155A2A01, 190155A2A01-PFM.\u003c\/li\u003e\n  \u003cli\u003eAdditional cross-refs: HO3113134, HO3115162, 601420, 611420, 620297, 620289.\u003c\/li\u003e\n  \u003cli\u003eFits Accord Touring 2016 and Accord models 2013–2017 (EX, EX-L, LX-S).\u003c\/li\u003e\n  \u003cli\u003ePull-type fan assemblies matching original airflow designs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is typically straightforward for anyone comfortable with basic auto repairs and common hand tools. Because these are direct-fit units, you generally remove the old assembly, transfer any reusable mounting hardware, plug in the electrical connector, and bolt the new fan in place.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrepare standard hand tools: ratchet, sockets, and trim clips if needed.\u003c\/li\u003e\n  \u003cli\u003eDisconnect the battery before handling electrical connectors.\u003c\/li\u003e\n  \u003cli\u003eAllow the engine to cool before removing the radiator shroud or fans.\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs and verify connector seating to prevent electrical issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BLACKHORSE-RACING pack of two radiator cooling fan assemblies is aimed at Honda Accord owners (2013–2017 EX\/EX-L\/LX-S and 2016 Touring) who need a reliable, direct-fit replacement for failing radiator fans. It suits DIY mechanics, independent shops, and fleet maintenance teams seeking OEM-referenced parts that simplify repairs and restore proper cooling system performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fans fit all 2013–2017 Honda Accord models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Accord EX, EX-L, LX-S (2013–2017) and Accord Touring 2016; verify OEM numbers to confirm exact fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is special wiring or modification required for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modification needed; these are direct OE-fit assemblies that use the stock connectors and mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67585052639417,"sku":"B0BYCZ3Y7F","price":290.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-assembly-view.jpg?v=1790465192"},{"product_id":"blackhorse-racing-1-torque-converter-cvt-clutch-kit-for-1-straight-crankshafts-8-13-hp-10t-40-41-sprocket","title":"BLACKHORSE-RACING 1\" Torque Converter CVT Clutch Kit for 1\" Straight Crankshafts — 8–13 HP, 10T #40\/#41 Sprocket","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 1\" Torque Converter CVT clutch kit is a complete replacement drive unit engineered for 1\" straight crankshafts and small engines producing roughly 8–13 HP.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis compact torque converter set replaces common Comet units and fits a wide range of horizontal-shaft small engines used on go karts, mini bikes, lawn machines and light utility equipment. The kit ships with a 10-tooth sprocket sized for #40\/#41 chain and a 5\/8\" driven clutch with a 6\" inner diameter, giving you the correct components to swap into many off-the-shelf drivetrains without fabricating new parts.\u003c\/p\u003e\n\n\u003ch3\u003eWill this clutch work with my engine and crankshaft?\u003c\/h3\u003e\n\u003cp\u003eYes — the assembly is designed for engines with a 1\" straight (non-keyed) crankshaft and horizontal orientation. It commonly fits Briggs, Robin, Tecumseh, Honda-style clones, Kohler, Clinton and Lifan engines used in recreational and light commercial applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\" straight crankshaft sizing — no taper adapters needed for compatible engines\u003c\/li\u003e\n  \u003cli\u003eBuilt for horizontal-shaft small engines typically rated 8–13 HP\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for several Comet part numbers and similar drive units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the sprocket and chain compatibility affect installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a 10-tooth sprocket cut for #40\/#41 roller chain, which is a standard choice for go-kart and mini-bike drivetrains. Choosing the right chain size simplifies alignment and tensioning so you can reuse an existing frame layout or a common sprocket spacing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10-tooth sprocket matched for #40\/#41 chain for straightforward chain setup\u003c\/li\u003e\n  \u003cli\u003eSprocket and clutch accept common bolt patterns used on Comet-style units\u003c\/li\u003e\n  \u003cli\u003eSaves time compared with custom-machined sprockets or adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat applications is this torque converter suited for?\u003c\/h3\u003e\n\u003cp\u003eThis clutch\/drive unit is popular where compact, continuously variable torque conversion is needed for low-speed work or recreational use. Install it on go karts, small tractors, mini bikes, riding mowers and simple winch systems for smooth power transfer across varying loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGo karts and recreational mini-buggies requiring responsive low-end pull\u003c\/li\u003e\n  \u003cli\u003eMini bikes and personal transporters using 8–13 HP engines\u003c\/li\u003e\n  \u003cli\u003eLight-duty lawn and garden machines or winch systems needing CVT-style engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: mechanics, fabricators and DIY builders who need a reliable, drop-in replacement for Comet-style torque converters on 1\" straight-shaft small engines. It’s aimed at users who want an off-the-shelf CVT clutch kit that fits common chain sizes and engine brands without extensive modification. If you’re matching a Comet part number, rebuilding a go kart drive, or swapping a worn clutch for similar equipment, this BLACKHORSE-RACING kit gives the necessary hardware and compatibility to get back on track quickly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit a keyed crankshaft?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit is made for a 1\" straight (non-keyed) crankshaft; keyed shafts need an adapter or different clutch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which chain size does the sprocket use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The included 10-tooth sprocket is cut for #40\/#41 roller chain, standard on many go-kart drives.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67585111752889,"sku":"B08SQGNTKD","price":192.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-assembled-clutch.jpg?v=1790467691"},{"product_id":"blackhorse-racing-fender-roller-tool-blue-heavy-duty-adjustable-lip-roller-for-wheel-arches","title":"BLACKHORSE-RACING Fender Roller Tool — Blue heavy-duty adjustable lip roller for wheel arches","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING fender roller tool gently reshapes wheel arches so you can fit larger wheels or correct minor arch damage without cutting metal.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for DIY mechanics and professional body shops, this heavy-duty lip rolling and flaring tool bolts to the hub flange and uses a fully adjustable arm to apply controlled pressure along the wheel arch. Constructed from hardened iron with elongated mounting holes for common 4- and 5-bolt hubs, the unit lets you push or pull the inner lip gradually to increase tire-to-arch clearance or create a smooth outward flare for larger wheels or fender flares.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tool make fitting bigger wheels easier?\u003c\/h3\u003e\n\u003cp\u003eThe BLACKHORSE-RACING roller reforms the inner fender lip by rolling or pushing the metal outward, preventing rubbing and allowing larger diameter or wider wheels to be installed without trimming. Controlled, incremental movement keeps the paint and fender shape intact when used properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolts to hub flange for a stable, centered setup\u003c\/li\u003e\n  \u003cli\u003eAdjustable arm applies gradual pressure to avoid cracking paint\u003c\/li\u003e\n  \u003cli\u003eElongated adapter holes fit most popular 4- and 5-bolt hubs\u003c\/li\u003e\n  \u003cli\u003eSuitable for adding aftermarket fender flares or wider tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicle work can I accomplish with this roller?\u003c\/h3\u003e\n\u003cp\u003eUse the tool to roll stock wheel arches outward, correct minor collision creases, or create clearance for wider tires and offset wheels. It’s intended for sheet metal reshaping and finishing, not heavy structural repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreate up to several millimeters of clearance per pass with controlled pressure\u003c\/li\u003e\n  \u003cli\u003eSmooth wheel-arch lips before installing fender flares\u003c\/li\u003e\n  \u003cli\u003eRepair cosmetic deformation from low-speed impacts\u003c\/li\u003e\n  \u003cli\u003eWorks on cars, light trucks and many SUVs with compatible hub patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I set up and use the BLACKHORSE-RACING fender roller safely?\u003c\/h3\u003e\n\u003cp\u003eMount the adapter plate to the hub, secure the roller arm, and adjust the angle so the wheel arch meets the roller evenly. Rotate the hub slowly and increase pressure in small increments, checking fitment frequently to avoid overworking the metal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-tighten and test alignment before final torque\u003c\/li\u003e\n  \u003cli\u003eAdvance slowly—small turns produce predictable shaping\u003c\/li\u003e\n  \u003cli\u003eProtect painted surfaces with tape where the roller contacts the arch\u003c\/li\u003e\n  \u003cli\u003eCheck hub compatibility and use appropriate wheel spacers if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BLACKHORSE-RACING Fender Roller is aimed at enthusiasts modifying wheel fitment, mobile mechanics, and body shop technicians who need a reliable, adjustable tool to roll or flare arches without cutting metal. If you’re upgrading wheel size or installing fender flares and want a controlled, professional result, this heavy-duty, iron-built tool is designed to deliver consistent reshaping for most 4- and 5-bolt hubs. For any issues or questions about fitment and safe use, contact customer support for guidance before attempting extensive arch reforming.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fender roller fit my 5-bolt hub?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—its adapter plate has elongated holes to accommodate most common 4- and 5-bolt hub patterns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this tool without damaging paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if used correctly: protect edges with tape and apply gradual pressure to avoid cracking or chipping.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67585942356153,"sku":"B07TYXR7BZ","price":160.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-assembly.jpg?v=1790480238"},{"product_id":"blackhorse-racing-30-series-cvt-torque-converter-kit-6-driven-5-8-driver-3-4-for-up-to-8-hp-improved-belt-tracking","title":"BLACKHORSE-RACING 30-Series CVT Torque Converter Kit — 6\" Driven (5\/8\") \u0026 Driver (3\/4\") for up to 8 HP, Improved Belt Tracking","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 30 Series Bore GO Kart CVT Torque Converter Kit is a complete replacement clutch set designed to restore smooth automatic belt drive performance on small engines up to 8 HP.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit includes both a 6\" driven clutch with a 5\/8\" shaft bore and a driver clutch with a 3\/4\" bore, made to match common 30-series Comet\/Manco\/Yerf Dog part numbers. Built as a drop-in replacement for worn CVT components, the set helps recover reliable torque multiplication, improve belt tracking, and maintain consistent engagement for go-karts, mini-bikes, lawn equipment, and other small-engine machines.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included and how do the parts fit together?\u003c\/h3\u003e\n\u003cp\u003eThe kit provides a 6\" diameter asymmetrical driven clutch (5\/8\" bore) and a driver clutch with a 3\/4\" bore configured for 30-series setups. Both pieces are manufactured to align with common mounting patterns so installation is straightforward for standard shaft sizes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" driven clutch, 5\/8\" shaft bore, compatible with Comet 219457a replacements\u003c\/li\u003e\n  \u003cli\u003eDriver clutch, 3\/4\" bore, replaces Comet 219552 \/ Manco 5957\u003c\/li\u003e\n  \u003cli\u003eAsymmetrical driven clutch includes 3\/16\" keyway and 3\/4\" ID hole\u003c\/li\u003e\n  \u003cli\u003eRated for engines up to 8 HP (driver clutch optimized for up to 7–8 HP)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this kit affect performance and belt life?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn clutches restores correct belt tension and torque transfer, which reduces slippage and uneven wear. Properly matched clutches help the belt run centered on the pulleys and improve acceleration responsiveness under variable load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMore consistent engagement reduces belt slippage at startup\u003c\/li\u003e\n  \u003cli\u003eImproved torque transfer under load for smoother acceleration\u003c\/li\u003e\n  \u003cli\u003eBetter belt tracking minimizes edge wear and increases belt life\u003c\/li\u003e\n  \u003cli\u003eAsymmetrical driven design helps efficient power transfer across RPM range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich machines and shaft sizes are compatible with this replacement kit?\u003c\/h3\u003e\n\u003cp\u003eThe components are designed for typical small-engine CVT systems found on go-karts, mini-bikes, and similar equipment. They match common 30-series specifications and replace several widely used part numbers for straightforward fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 5\/8\" and 3\/4\" shaft applications (driven and driver respectively)\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for Comet 219457a (driven) and Comet 219552 \/ Manco 5957 (driver)\u003c\/li\u003e\n  \u003cli\u003eWorks with engines up to approximately 8 HP and many 7 HP setups\u003c\/li\u003e\n  \u003cli\u003eCommon use cases: go-karts, mini-bikes, lawn equipment, small utility vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I check when fitting these clutches?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for anyone familiar with belt-drive CVTs. Basic tools and safety precautions are required; ensure shafts are clean, keyways aligned, and belts are correctly tensioned after assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect shafts and keys for wear; replace damaged keys or bushings\u003c\/li\u003e\n  \u003cli\u003eVerify bore sizes (5\/8\" driven, 3\/4\" driver) before mounting\u003c\/li\u003e\n  \u003cli\u003eClean mating surfaces and apply light anti-seize if recommended\u003c\/li\u003e\n  \u003cli\u003eAdjust belt alignment and tension after installation for optimal operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BLACKHORSE-RACING 30 Series kit is aimed at DIY mechanics, small-vehicle enthusiasts, and maintenance technicians who need a reliable replacement for worn CVT clutches. If you operate go-karts, mini-bikes, lawn-and-garden machines, or other small-engine equipment that uses 30-series clutches and your current clutches show slippage, noise, or poor belt tracking, this kit offers a direct-fit, high-quality option to restore performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my go-kart's shaft sizes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit includes a driven clutch with a 5\/8\" bore and a driver with a 3\/4\" bore—verify your shaft diameters match before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which OEM part numbers does this replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces Comet 219457a (driven) and Comet 219552 \/ Manco 5957 (driver), plus similar 30-series clutches.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67586523398329,"sku":"B07N7VBQSV","price":129.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-packaging-clutch-set.jpg?v=1790485642"},{"product_id":"blackhorse-racing-2-5-single-chamber-race-muffler-pair-center-in-out-7-body-aggressive-tone","title":"BLACKHORSE-RACING 2.5\" Single-Chamber Race Muffler Pair — Center In\/Out, 7\" Body, Aggressive Tone","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING pair of single-chamber performance race mufflers — 2.5\" center inlet\/center outlet, 7\" body for a bold, track-ready exhaust note.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese universal race mufflers are built for drivers who want a compact, aggressive-sounding exhaust upgrade that fits many custom and bolt-on systems. Each muffler features a 7\" body with a 2.5\" center inlet and outlet, and an oval 4\" x 9\" shell that balances compact packaging with internal volume to produce a deep, race-inspired tone. Sold as a matched pair, they’re intended for performance builds, custom dual-exhaust routes, and track or show cars where sound and simplicity matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these mufflers affect vehicle sound and character?\u003c\/h3\u003e\n\u003cp\u003eThe single-chamber design prioritizes a raw, aggressive tone rather than quiet refinement. Expect a louder, deeper exhaust note under throttle with minimal interior damping, giving a race-like character that many enthusiasts prefer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-chamber core delivers a pronounced, throatier sound.\u003c\/li\u003e\n  \u003cli\u003e2.5\" center inlet\/outlet preserves flow for higher RPM response.\u003c\/li\u003e\n  \u003cli\u003eOval 4\" x 9\" body balances compact size with resonant volume.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my exhaust system and how are they mounted?\u003c\/h3\u003e\n\u003cp\u003eThese are universal mufflers designed to adapt to a variety of custom and aftermarket systems. The straight 2.5\" center in\/center out configuration works well in many dual- or single-exit setups; installation typically requires clamps, welding, or adapter piping for a secure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.5\" inlet\/outlet matches common aftermarket pipe sizes and adapters.\u003c\/li\u003e\n  \u003cli\u003e7\" body and 12\" overall length allow flexible placement in tight chassis areas.\u003c\/li\u003e\n  \u003cli\u003eMounting options: slip-fit clamp, welded joint, or custom hangers as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical dimensions and construction details?\u003c\/h3\u003e\n\u003cp\u003eEach muffler has a compact 7\" cylindrical body with a 12\" total length from tip to tip, and uses a 4\" x 9\" oval outer shell to keep overall size small while retaining acoustic volume. The center inlet\/center outlet layout simplifies routing in many factory and aftermarket exhaust geometries.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBody length: 7\"; overall length: 12\" for straightforward placement.\u003c\/li\u003e\n  \u003cli\u003eInlet\/outlet diameter: 2.50\" center-to-center for consistent flow.\u003c\/li\u003e\n  \u003cli\u003eOuter shell: 4\" x 9\" oval for compact packaging and visual appeal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will these mufflers impact performance and maintenance?\u003c\/h3\u003e\n\u003cp\u003eDesigned primarily for sound and unrestricted flow, these race-style mufflers can reduce backpressure compared with restrictive factory units, which may aid throttle response on performance builds. They are low-maintenance parts but should be inspected for fit and corrosion depending on use and environment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlow-oriented internals favor engine breathing under load.\u003c\/li\u003e\n  \u003cli\u003eDurability depends on installation method and exposure to elements.\u003c\/li\u003e\n  \u003cli\u003eRegular checks recommended after track use or aggressive driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Enthusiasts building race-inspired or performance exhaust systems who want a compact, loud single-chamber muffler with straightforward 2.5\" connections. Ideal for custom dual-exhaust conversions, lightweight track cars, and street\/strip projects where aggressive sound and easy integration are priorities. Not intended for applications that require OEM noise suppression, emissions compliance, or quiet daily commuting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these mufflers compatible with 2.5\" exhaust pipes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The mufflers have 2.5\" center inlet and outlet diameters designed to fit common 2.5\" pipes with clamps, adapters, or welding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these mufflers reduce backpressure for performance gains?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are flow-oriented and can lower backpressure versus restrictive stock units, which may aid throttle response on performance builds.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67586715058361,"sku":"B07K48293P","price":176.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view-pair.jpg?v=1790491133"},{"product_id":"blackhorse-racing-3-center-center-single-chamber-race-muffler-pair-3in-high-flow-aluminized-steel-7-compact-body","title":"BLACKHORSE-RACING 3\" Center\/Center Single-Chamber Race Muffler Pair — 3in High-Flow Aluminized Steel, 7\" Compact Body","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING pair of 3\" center\/center single-chamber race mufflers are a universal-fit, high-flow steel exhaust solution engineered to deliver deeper throat tone and track-ready performance without complicated modifications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese compact performance mufflers combine a single chamber acoustic design with a 3-inch inlet\/outlet layout and aluminized steel construction to give racers and enthusiasts stronger exhaust note, improved flow characteristics, and durability for heavy-duty use. At 7 inches tall and built for center-to-center piping, they fit many street and race applications and are intended for high-performance environments where sound and reliability matter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat performance changes should I expect after installing these mufflers?\u003c\/h3\u003e\n\u003cp\u003eExpect a louder, deeper exhaust tone and reduced backpressure compared with many restrictive stock units. The single-chamber layout emphasizes low-to-mid frequency resonance for a pronounced throat while preserving consistent exhaust flow for higher RPM operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\" inlet\/outlet promotes increased exhaust volume and freer flow.\u003c\/li\u003e\n  \u003cli\u003eSingle-chamber internal geometry enhances low\/mid frequency sound.\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce backpressure relative to restrictive OE mufflers.\u003c\/li\u003e\n  \u003cli\u003eConsistent performance across a wide RPM range suitable for spirited driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these mufflers fit and install on different vehicles?\u003c\/h3\u003e\n\u003cp\u003eThe pair is a universal center-to-center 3\" configuration that works with most 3\" exhaust systems using clamps or welds. Their compact 7\" body height and straight-through center alignment make routing and hangar placement straightforward for custom and OEM-adapted systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCenter\/center design fits inline 3\" piping runs.\u003c\/li\u003e\n  \u003cli\u003eSuitable for clamp or weld installations—professional welding recommended for permanence.\u003c\/li\u003e\n  \u003cli\u003eCompact 7\" body aids clearance in tight underbody locations.\u003c\/li\u003e\n  \u003cli\u003ePair configuration supports dual-exit or split systems on many chassis layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build features ensure durability for track use?\u003c\/h3\u003e\n\u003cp\u003eThese mufflers use aluminized steel to resist corrosion and heat typical in high-output exhaust systems, balancing cost and longevity. The construction is tailored for competition use, delivering rugged service life under repeated thermal cycling and vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminized steel shell resists oxidation and heat-related corrosion.\u003c\/li\u003e\n  \u003cli\u003eRobust internal chambering holds up to frequent high-temperature use.\u003c\/li\u003e\n  \u003cli\u003eWelded seams and solid inlet\/outlet joints for secure installation.\u003c\/li\u003e\n  \u003cli\u003eEngineered for repeated track cycles and spirited on-road driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these mufflers affect fuel economy or engine tuning?\u003c\/h3\u003e\n\u003cp\u003eBy lowering backpressure and improving exhaust evacuation, these mufflers can change engine load characteristics, particularly on highly tuned engines. Most naturally aspirated and forced-induction systems see no major fuel economy penalties, but professional tuning or a quick ECU check is recommended for optimized performance on modified engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLower backpressure can alter engine scavenging dynamics.\u003c\/li\u003e\n  \u003cli\u003eMinor fueling adjustments may be beneficial on tuned engines.\u003c\/li\u003e\n  \u003cli\u003eNo guaranteed MPG improvements; effects depend on the vehicle and setup.\u003c\/li\u003e\n  \u003cli\u003eRecommended ECU check after installation for best drivability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BLACKHORSE-RACING 3\" center\/center single-chamber muffler pair is aimed at racers, track-day enthusiasts, and performance-minded drivers seeking an affordable, durable way to upgrade exhaust sound and flow. If you run a 3\" exhaust or are building a custom system for spirited driving or competition, these mufflers offer a compact, easy-to-fit solution that emphasizes low-end richness and reliable construction.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these mufflers compatible with a 3\" exhaust system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are center-to-center 3\" inlet\/outlet mufflers designed for use with 3\" piping, suitable for clamp or weld installations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these mufflers require modifications or tuning after install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles need no major modifications, but tuned engines may benefit from an ECU check or minor fueling adjustments for best performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67586715156665,"sku":"B07BWLVRXR","price":167.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view-pair_f4ee452e-57b6-4fe0-8463-6e7a338b6e98.jpg?v=1790491136"},{"product_id":"blackhorse-racing-rear-tail-light-brake-lamp-for-toyota-camry-2010-2011-direct-fit-abs-pmma-weatherproof","title":"BLACKHORSE-RACING Rear Tail Light Brake Lamp for Toyota Camry 2010–2011 — Direct-Fit ABS\/PMMA, Weatherproof","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING rear tail light brake lamp is a direct-fit, high-durability replacement for Toyota Camry 2010–2011 that restores lighting performance and gives your vehicle a sharper appearance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aftermarket rear tail light assembly is built from impact-resistant ABS plastic and PMMA lenses to match OEM fitment while offering long service life. It replaces the factory unit with full compatibility for wiring and mounting points, includes protective circuitry to reduce failure risk, and is designed to resist dust, water, and corrosion. Whether you need a like-for-like swap after damage or want to refresh the rear-end styling, this lamp balances durability, safety features, and visual appeal.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tail light fit my 2010–2011 Toyota Camry?\u003c\/h3\u003e\n\u003cp\u003eYes — the assembly is engineered for direct compatibility with Toyota Camry models from 2010 and 2011. Mounting tabs, connector type, and overall dimensions match the original equipment to simplify installation without body modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for 2010–2011 Toyota Camry rear passenger or driver side (verify left\/right listing).\u003c\/li\u003e\n  \u003cli\u003eOEM-style mounting points and plug-and-play electrical connectors.\u003c\/li\u003e\n  \u003cli\u003eNo trimming or custom brackets required for standard models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement improve reliability and safety?\u003c\/h3\u003e\n\u003cp\u003eThe lamp is manufactured from high-quality ABS and PMMA, materials chosen for impact resistance and weather protection. Built-in reverse polarity and open-circuit protection reduces electrical damage risk, while waterproof and corrosion-resistant construction helps maintain illumination in adverse conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReverse polarity protection and open-circuit safety features to protect wiring.\u003c\/li\u003e\n  \u003cli\u003eDust-proof and waterproof seals for consistent performance in rain and road spray.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant housing and lens materials to extend service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat styling and efficiency benefits can I expect?\u003c\/h3\u003e\n\u003cp\u003eBeyond restoring function, this tail lamp adds a cleaner, more refined look to the Camry’s rear end thanks to precise lens contours and a polished finish. The assembly is designed to operate efficiently with vehicle electrical systems, producing reliable light output without added noise or interference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharper, more sophisticated rear appearance that refreshes aged or damaged lamps.\u003c\/li\u003e\n  \u003cli\u003eEnergy-efficient operation with no electronic interference or audible noise.\u003c\/li\u003e\n  \u003cli\u003eHigh optical clarity from PMMA lens for consistent brake and tail illumination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone with basic tools and familiarity with automotive lighting: unbolt the old unit, disconnect the harness, and secure the new assembly in place. Before purchase, confirm the part is specified for your vehicle side (left or right) and model year to avoid fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple swap: remove old lamp, disconnect wiring, mount new lamp, reconnect harness.\u003c\/li\u003e\n  \u003cli\u003eConfirm left\/right side and 2010–2011 Camry compatibility before ordering.\u003c\/li\u003e\n  \u003cli\u003eTest lights after installation to ensure proper function of brake, tail, and reverse circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BLACKHORSE-RACING replacement tail light is aimed at Toyota Camry 2010–2011 owners seeking a reliable, OEM-style lamp after collision damage, lens deterioration, or during a cosmetic refresh. It also suits DIY mechanics and professional installers who want a robust, weather-resistant unit with built-in electrical protections and clear fitment specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this tail light a direct replacement for my 2010–2011 Camry?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed for direct fit on Toyota Camry 2010–2011 with matching mounting points and connectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the unit resist water and corrosion?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The assembly is dust-proof, waterproof, and made from corrosion-resistant ABS and PMMA materials.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67586748154041,"sku":"B0BNCZNYHL","price":129.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-tail-light-front-assembly.jpg?v=1790492285"},{"product_id":"blackhorse-racing-6-ton-jack-stands-pair-adjustable-14-6-24-heavy-duty-steel-with-self-locking-ratchet","title":"BLACKHORSE-RACING 6 Ton Jack Stands Pair — Adjustable 14.6\"–24\" Heavy-Duty Steel with Self-Locking Ratchet","description":"\u003cp\u003e\u003cstrong\u003eThese BLACKHORSE-RACING jack stands are a pair of heavy-duty steel supports rated for 6 tons (12,000 lbs) each, adjustable from 14.6\" to 24\" to safely hold cars, SUVs and light trucks during maintenance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for professional and home garages, this pair of BLACKHORSE-RACING jack stands combines a wide concave saddle, a multi-position self-locking ratchet bar and a broad welded pyramid base to deliver reliable support under lifted vehicles. Their cast ductile iron ratchet, serrated locking bar and robust steel construction focus on durability and predictable height adjustments so you can work beneath a vehicle with greater stability.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these stands secure my vehicle while I work underneath?\u003c\/h3\u003e\n\u003cp\u003eThe stands use a self-locking ratchet rod made from forged iron that automatically engages when the handle is lowered, preventing unintended descent. The top saddle features a large concave contact area to increase surface contact with pinch points or axle locations, improving stability at the lift points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged iron ratchet bar with serrations for multi-position locking\u003c\/li\u003e\n  \u003cli\u003eAutomatic self-locking action when the handle is down\u003c\/li\u003e\n  \u003cli\u003eConcave saddle to better center and cradle support points\u003c\/li\u003e\n  \u003cli\u003eWide welded pyramid base for improved load distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and weight limits are appropriate for these jack stands?\u003c\/h3\u003e\n\u003cp\u003eEach stand is rated to support up to 6 tons (12,000 lbs); sold as a pair, they are suitable for a broad range of vehicles when used per manufacturer guidance. They work well for small cars, sedans, SUVs, vans and many light-duty pickups, provided vehicle weight and lift points are properly assessed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6-ton (12,000 lb) rated capacity per stand\u003c\/li\u003e\n  \u003cli\u003eAdjustable height range: 14.6\" to 24\" for different axle and lift configurations\u003c\/li\u003e\n  \u003cli\u003eSuitable for most consumer vehicles and light commercial models\u003c\/li\u003e\n  \u003cli\u003eNot intended as the sole support for heavier commercial trucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to set the height and release the stands?\u003c\/h3\u003e\n\u003cp\u003eHeight is adjusted quickly using the serrated ratchet bar; lift to the desired position while the ratchet is free, then lower the handle to engage the self-lock. To lower, raise the handle to disengage the ratchet and carefully control descent—follow safe lowering procedures and never work under an unsupported or unstable load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-position ratchet bar allows stepwise height selection\u003c\/li\u003e\n  \u003cli\u003eHandle-up position releases ratchet for adjustment\u003c\/li\u003e\n  \u003cli\u003eHandle-down position locks ratchet automatically\u003c\/li\u003e\n  \u003cli\u003eClear serrations provide tactile feedback for secure settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction details improve long-term reliability?\u003c\/h3\u003e\n\u003cp\u003eThe stands combine heavy-gauge steel with industrial welding and a cast ductile iron ratchet for wear resistance under repeated use. The pyramid-shaped base adds rigidity and reduces tipping, while the large saddle surface reduces point loading and helps protect vehicle components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy steel pyramid base with industrial welds for stability\u003c\/li\u003e\n  \u003cli\u003eCast ductile iron ratchet bar for strength and wear resistance\u003c\/li\u003e\n  \u003cli\u003eWide concave saddle to spread load across contact area\u003c\/li\u003e\n  \u003cli\u003eDurable finish to withstand garage environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: BLACKHORSE-RACING 6 Ton jack stands suit home mechanics, professional technicians and small repair shops that need robust, adjustable supports for vehicle maintenance. They are ideal when you require a high-capacity stand pair with a secure self-locking ratchet and a stable base—just ensure you observe proper lifting points, load ratings and safety procedures for your specific vehicle before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum load capacity of each stand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each BLACKHORSE-RACING stand is rated for 6 tons (12,000 lbs) per stand.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the adjustable height range?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The stands adjust from 14.6\" up to 24\" to fit various lift points and vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67586833875129,"sku":"B0BY8FW75W","price":169.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-jack-stands-front-packaging.jpg?v=1790493789"},{"product_id":"blackhorse-racing-12-electric-radiator-cooling-fan-kit-12-44-slim-10-blade-800-cfm-with-thermostat-relay","title":"BLACKHORSE-RACING 12\" Electric Radiator Cooling Fan Kit — 12.44\" Slim 10-Blade, 800 CFM with Thermostat Relay","description":"\u003cp\u003e\u003cstrong\u003eBlackhorse-Racing's 12\" universal electric radiator cooling fan kit combines a slim 10-blade 12V fan with a 180°F thermostat, relay and mounting hardware for auxiliary engine cooling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit is built to improve airflow when your vehicle needs extra cooling: the compact 12.44\" diameter fan delivers up to 800 CFM at a low electrical draw, while the included thermostat relay and brass probe automate operation so the fan runs only when needed. Designed for universal fitment, the slim profile preserves engine-bay clearance and the corrosion-resistant components are suited for long-term use on radiators, condensers, intercoolers and transmission oil coolers.\u003c\/p\u003e\n\n\u003ch3\u003eHow much cooling power does this 12\" fan provide?\u003c\/h3\u003e\n\u003cp\u003eThe fan uses a 10-blade design engineered to push strong airflow without excessive noise or amperage. It can reach a peak of about 800 CFM and spins up to roughly 2000 RPM, while drawing no more than 7.5 amps at 12 volts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall diameter: 12.44 inches for broad coverage\u003c\/li\u003e\n  \u003cli\u003eThickness: 2.36 inches for tight engine bays\u003c\/li\u003e\n  \u003cli\u003eMaximum fan RPM: ~2000 ±10%\u003c\/li\u003e\n  \u003cli\u003eMaximum airflow: up to 800 CFM with ≤7.5 A draw\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperature control and hardware are included?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a temperature-controlled switch assembly that turns the fan on at 180°F and off at 165°F, plus a brass 3\/8\" NPT probe and a 1\/2\" NPT adapter so you can thread it into a coolant port. A relay and mounting brackets with tie straps are supplied to create a safe, reliable electrical and physical installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThermostat set points: 180°F on \/ 165°F off\u003c\/li\u003e\n  \u003cli\u003eProbe: 3\/8\" NPT brass with 1\/2\" adapter included\u003c\/li\u003e\n  \u003cli\u003eElectrical: relay included for safe current switching\u003c\/li\u003e\n  \u003cli\u003eMounting: brackets and tie straps for pin-point placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and systems will this fan kit work with?\u003c\/h3\u003e\n\u003cp\u003eThis is a universal auxiliary fan intended for a wide range of automobiles, trucks and performance applications; compatibility depends primarily on radiator or condenser size and mounting space. It’s commonly used for supplemental cooling of radiators, air conditioning condensers, intercoolers, oil coolers and transmission coolers where extra airflow is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many vehicles — measure radiator face to confirm fit\u003c\/li\u003e\n  \u003cli\u003eUseful for hot-weather A\/C support or towing and heavy loads\u003c\/li\u003e\n  \u003cli\u003eWorks as an auxiliary fan for oil or transmission coolers\u003c\/li\u003e\n  \u003cli\u003eSlim profile suits tight engine-bay locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? Installers, DIY mechanics and performance-minded owners who need reliable, automatic auxiliary cooling will benefit most from this kit. It’s a practical choice for anyone adding after-market cooling capacity—whether to remedy overheating under load, support the air-conditioning system during idling, or protect transmission and oil temperatures on heavy-duty drives. If you need a compact fan with automated temperature control, low amp draw and hardware for a secure fit, this Blackhorse-Racing 12\" fan kit is designed to be a straightforward, durable solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this 12\" fan fit my radiator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits most radiators if the 12.44\" diameter and 2.36\" thickness physically clear your mounting area; measure your radiator face and available engine-bay space before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature does the thermostat activate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The included thermostat turns the fan on at 180°F and off at 165°F using the supplied brass probe.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67586970878137,"sku":"B07DLSPDN1","price":104.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-12-inch-fan-front-view.jpg?v=1790498418"},{"product_id":"blackhorse-racing-3-ton-jack-stands-11-4-16-8-pair-heavy-duty-steel-self-locking-ratchet","title":"BLACKHORSE-RACING 3 Ton Jack Stands 11.4\"–16.8\" Pair — Heavy-Duty Steel, Self-Locking Ratchet","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 3 Ton (6,000 lb) jack stands are a pair of heavy-duty adjustable steel supports that lift and securely hold cars, SUVs and light trucks between 11.4\" and 16.8\".\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for home garages and professional repair shops, these two jack stands deliver a combination of high load capacity and an adjustable ratchet mechanism for quick height changes. Built from welded heavy steel with a pyramid base and a large concave saddle, they focus on stable contact and stepwise locking for routine maintenance, tire work, or underbody access.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these jack stands maintain a secure hold while I work beneath a vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe stands use a forged iron self-locking ratchet bar with serrated teeth that locks automatically when weight is applied. A wide, concave saddle increases the contact area with the vehicle lift point to reduce slippage and distribute force.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelf-locking forged ratchet rod prevents unintentional descent.\u003c\/li\u003e\n  \u003cli\u003eSerrated, multi-position ratchet bar offers reliable stepwise height locking.\u003c\/li\u003e\n  \u003cli\u003eLarge concave saddle provides stable, centered load contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat height range and load capacity do these stands offer?\u003c\/h3\u003e\n\u003cp\u003eEach stand adjusts from 11.4\" up to 16.8\", letting you choose the correct clearance for most sedans, SUVs, vans and light pickups. The rated load capacity is 3 tons (6,000 lbs) per stand, sized to support a wide variety of passenger vehicles when used in pairs under manufacturer-recommended lift points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable height range: 11.4\"–16.8\" for versatile clearance.\u003c\/li\u003e\n  \u003cli\u003eRated capacity: 3 tons (6,000 lbs) per stand.\u003c\/li\u003e\n  \u003cli\u003ePyramid steel base for improved floor contact and balance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features improve durability and stability?\u003c\/h3\u003e\n\u003cp\u003eThe stands are constructed from heavy welded steel with a pyramid-shaped base for a low center of gravity and broad footprint. The ratchet bar is cast ductile iron, chosen for strength and wear resistance, and joins the base with industrial welding for long-term stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy steel pyramid base for firm ground contact and reduced tipping risk.\u003c\/li\u003e\n  \u003cli\u003eHigh-quality cast ductile iron ratchet bar resists deformation.\u003c\/li\u003e\n  \u003cli\u003eIndustrial welding ties components tightly for consistent alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to adjust and use these jack stands during a repair?\u003c\/h3\u003e\n\u003cp\u003eAdjustment is straightforward: lift the ratchet handle to release the bar for upward positioning and lower the handle to lock into place automatically. The serrated multi-position design allows quick height selection without fine threading, saving time during repeated servicing tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLift handle to raise, lower handle to automatically lock at the chosen notch.\u003c\/li\u003e\n  \u003cli\u003eMulti-position ratchet for rapid, repeatable height changes.\u003c\/li\u003e\n  \u003cli\u003eLarge saddle makes it simpler to align the vehicle's support point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: BLACKHORSE-RACING 3 Ton jack stands suit DIY mechanics, mobile technicians, and shop owners who need rugged, easy-to-adjust supports for routine vehicle maintenance and repairs. They are appropriate for use with a wide range of passenger vehicles when used in pairs and positioned at recommended lift points; they are not a substitute for following vehicle manufacturer safety guidance or hydraulic jack limitations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these jack stands rated per stand or per pair?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each JACK STAND is rated at 3 tons (6,000 lbs); use two or more stands following vehicle lift recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I adjust the height?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Lift the ratchet handle to raise the bar to the desired notch; lower the handle and the self-locking mechanism secures the position.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67587451322553,"sku":"B0BY8JQWBN","price":104.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view-pair_be7e433c-3f1e-4a18-9fd8-d19c65b61faa.jpg?v=1790508643"},{"product_id":"blackhorse-racing-12v-portable-electric-fuel-transfer-pump-45-l-min-diesel-kerosene-175w-motor","title":"BLACKHORSE-RACING 12V Portable Electric Fuel Transfer Pump 45 L\/min — Diesel Kerosene, 175W Motor","description":"\u003cp\u003e\u003cstrong\u003eThe BLACKHORSE-RACING 12V Portable Electric Fuel Transfer Extractor Pump moves diesel, kerosene, or oil quickly and safely from drums, tanks, and vehicles for fast on-site fluid transfers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, vehicle-powered transfer pump is built for workshops, farms, service vans and DIY mechanics who need to move fuel without lifting heavy containers. Powered from a 12V battery, the unit combines a high-speed motor, self-priming vane pump and a user-friendly on\/off switch to deliver steady flow rates and reliable operation. It’s intended for diesel, biodiesel and kerosene only — do not use with gasoline, alcohol, LPG or other low-flashpoint fuels.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast and powerful is this pump for refueling jobs?\u003c\/h3\u003e\n\u003cp\u003eThe built-in 175W motor spins at 3500 rpm and drives a rotating vane pump that can achieve up to 45 liters per minute under normal conditions. That flow rate makes short work of topping off tanks or emptying drums.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum flow: up to 45 L\/min for quick transfers\u003c\/li\u003e\n  \u003cli\u003eMotor spec: 175W, 3500 rpm provides consistent output\u003c\/li\u003e\n  \u003cli\u003eSelf-priming design reduces setup time and air-lock issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it handle safety and repeatable operation?\u003c\/h3\u003e\n\u003cp\u003eSafety features include a bypass valve and a simple on\/off control to prevent overpressure and allow controlled starts and stops. The internal pump design minimizes cavitation and keeps suction steady while working from different container heights.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner bypass valve protects the pump during restricted flow\u003c\/li\u003e\n  \u003cli\u003eOn\/off switch for instant control during transfers\u003c\/li\u003e\n  \u003cli\u003eRotating vane pump lowers the risk of dry-running when primed correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and power options are available?\u003c\/h3\u003e\n\u003cp\u003eConnection is via 12V battery clamps so you can power the pump from a car, truck, ATV or a portable 12V supply. The inlet and outlet fittings are designed to work with common transfer hoses and standard drum setups for rapid deployment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12V battery connectors allow use with vehicles and portable batteries\u003c\/li\u003e\n  \u003cli\u003eCompact footprint for in-vehicle storage or toolbox mounting\u003c\/li\u003e\n  \u003cli\u003eWorks with hose fittings and drum-transfer arrangements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat liquids can this extractor pump handle and what should you avoid?\u003c\/h3\u003e\n\u003cp\u003eThe unit is compatible with diesel, biodiesel and kerosene and is intended for commercial and automotive fuel-handling tasks. It is not rated for gasoline, alcohols, LPG or other highly volatile fuels — using those materials may cause fire hazards or damage the pump.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable: diesel, biodiesel, kerosene\u003c\/li\u003e\n  \u003cli\u003eNot suitable: gasoline, alcohols, LPG, other low-flashpoint fuels\u003c\/li\u003e\n  \u003cli\u003eCheck local regulations for fuel transfer and storage before use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technicians, fleet operators, agricultural users and mobile mechanics who need a rugged, portable solution for moving diesel-class fluids will find this BLACKHORSE-RACING pump useful. It’s well suited for service trucks, workshops, farmyards, construction sites and any situation where lifting barrels is impractical. If you require transfers of volatile fuels like gasoline, choose a pump rated for those fluids instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this pump run from a car battery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it connects to a 12V battery via clamps and runs from car, truck or portable 12V supplies.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the pump safe for gasoline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — it is rated for diesel, biodiesel and kerosene only; do not use with gasoline or alcohols.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67587526525113,"sku":"B07KQZ4DT7","price":114.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view_4c836c12-7425-49c9-95b4-8c417f8b0793.jpg?v=1790511929"},{"product_id":"blackhorse-racing-rv-step-covers-rugs-3-pack-18-wide-camper-stair-carpet-polyester-non-slip-with-stainless-spring-hooks","title":"BLACKHORSE-RACING RV Step Covers Rugs 3-Pack — 18\" Wide Camper Stair Carpet, Polyester Non-Slip with Stainless Spring Hooks","description":"\u003cstrong\u003eBLACKHORSE-RACING RV Steps Covers Rugs 3 Pack are 18\" wide, carpeted stair covers designed to protect, reduce slipping, and trap dirt on camper and motorhome steps.\u003c\/strong\u003e\n\n\u003cp\u003eThese replacement stair rugs fit most 18\" wide RV and camper steps and attach quickly with paired grommets and stainless steel spring hooks. Built from durable polyester, the covers wrap curved or straight treads to shield metal steps from wear, keep interior floors cleaner, and add a softer surface for feet and paws. The set includes three identical covers and mounting hardware so you can outfit the entry sequence in one simple install.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these step covers install and stay secure during travel?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: position the rug over the tread, select the correct grommet pair for your step depth, and fasten the included stainless steel springs with hooks. The springs maintain tension over bumps and movement, while rust-resistant construction prevents failure from weather exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e17.9\" long × 18\" wide size for standard 18\" steps\u003c\/li\u003e\n  \u003cli\u003eTwo paired grommets per rug to fit 8–10\" step depths\u003c\/li\u003e\n  \u003cli\u003eStainless steel springs and hooks for secure, anti-rust fastening\u003c\/li\u003e\n  \u003cli\u003eSimple snap-on adjustment for curved or radius treads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these rugs actually keep dirt out and protect the metal steps?\u003c\/h3\u003e\n\u003cp\u003eThe textured polyester surface scrapes soil and debris from shoes before entry, reducing how much gets tracked into the RV. In addition, the mats cover exposed metal edges and holes to prevent scuffs, trapped dirt, and rough contact with bare feet or pet paws.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDense polyester fibers trap grit and moisture\u003c\/li\u003e\n  \u003cli\u003eCovers block hot metal surfaces and step apertures\u003c\/li\u003e\n  \u003cli\u003eWashable material that refreshes appearance quickly\u003c\/li\u003e\n  \u003cli\u003eReduces interior cleaning frequency and wear on floors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these step rugs safe and comfortable for family and pets?\u003c\/h3\u003e\n\u003cp\u003eThe soft polyester nap adds traction and a cushioned feel underfoot while lowering slip risk on slick metal treads. Because the rugs shield holes and hot surfaces, they help protect small feet and paws without introducing bulky edges that could trip household members.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves grip compared with bare metal steps\u003c\/li\u003e\n  \u003cli\u003eProtects feet and paws from sharp holes and hot surfaces\u003c\/li\u003e\n  \u003cli\u003eLow-profile wrap reduces tripping hazards\u003c\/li\u003e\n  \u003cli\u003eSuitable for high-traffic family or pet-friendly use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I clean and maintain these camper step carpets?\u003c\/h3\u003e\n\u003cp\u003eMaintenance is low: brush off loose dirt, vacuum, or rinse with water for heavier soiling. The polyester construction dries quickly and resists rapid wear, so periodic cleaning keeps the rugs functional and attractive for many seasons.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrush or vacuum for routine care\u003c\/li\u003e\n  \u003cli\u003eRinse with hose for stubborn mud, then air dry\u003c\/li\u003e\n  \u003cli\u003eDurable fibers resist fraying and fading from normal use\u003c\/li\u003e\n  \u003cli\u003eReplace springs or clean grommets as needed for longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These BLACKHORSE-RACING step covers are aimed at RV and camper owners who want an easy, budget-friendly way to protect metal stair treads, cut down on interior dirt, and improve traction for family members and pets. They work well for travel trailers, motorhomes, campers with 18\" wide steps, and anyone seeking a simple, washable upgrade that installs in minutes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What step size do these covers fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each rug is 17.9\" by 18\" and fits 18\" wide stair treads, accommodating 8–10\" step depths using the paired grommets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I wash the RV step rugs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — brush or vacuum regularly and rinse with water for heavy soil; air dry. The polyester material is durable and cleans easily.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67587923443897,"sku":"B09XDMVF7B","price":75.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view-rv-step-cover.jpg?v=1790515822"},{"product_id":"blackhorse-racing-tr-600hp-snap-in-high-pressure-tire-valve-stems-1-1-4-50-pack-brass-core-100-psi-rating","title":"BLACKHORSE-RACING TR-600HP Snap-In High-Pressure Tire Valve Stems 1-1\/4\" — 50-Pack, Brass Core \u0026 100 PSI Rating","description":"\u003cp\u003e\u003cstrong\u003eThese are 50 high-pressure TR-600HP snap-in tire valve stems (1-1\/4\") designed to deliver durable, leak-tested sealing for wheels with a 0.453\" valve hole.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're servicing a fleet, rebuilding rims for trailers, or maintaining off-road vehicles, this kit supplies a bulk set of robust snap-in valve stems engineered for demanding applications. Each stem combines a reinforced rubber body with brass inner components and is factory-tested to minimize air loss and withstand pressures up to 100 PSI. The package includes 50 stems so you can replace multiple wheels at once or keep a stocked supply for routine maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these valve stems hold up under high pressure?\u003c\/h3\u003e\n\u003cp\u003eThe TR-600HP stems are built for elevated inflation levels with a 100 PSI maximum rating and brass cores that resist corrosion. Sealing surfaces are molded from durable rubber to maintain elastic recovery and resist cracking under stress. Every stem undergoes leak testing before shipping to help ensure fit and performance on installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated maximum inflation pressure: 100 PSI\u003c\/li\u003e\n  \u003cli\u003eBrass stem and core for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eRubber body designed for long-term sealing\u003c\/li\u003e\n  \u003cli\u003eFactory 100% leak-tested to validate seal integrity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size wheels and vehicles are these compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese snap-in valve stems fit rims with a 0.453\" (11.5 mm) valve hole and are 1-1\/4\" in length, making them suitable for many automotive and heavy-duty wheel applications. They work on cars, light and heavy trucks, trailers, ATVs, lawn equipment, and motorcycles when the rim hole matches the specified diameter. Confirm the rim hole size before purchasing to guarantee compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eValve hole diameter: 0.453\" (11.5 mm)\u003c\/li\u003e\n  \u003cli\u003eStem length: 1-1\/4\" (approx. 31.75 mm)\u003c\/li\u003e\n  \u003cli\u003eFits passenger vehicles, trucks, trailers, ATVs, motorcycles, and lawn mowers\u003c\/li\u003e\n  \u003cli\u003eSnap-in style for rims designed for rubber valve installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: deflate and remove the tire, push the stem through the rim from the inside until the rubber flange seats, and the snap-in feature locks it in place. A simple valve stem puller or standard hand tools can be used to ensure proper seating; professional tire shop equipment speeds the process but is not required for experienced DIYers. Replacement is quick when you have the tire off the rim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeflate tire and remove from rim before installing\u003c\/li\u003e\n  \u003cli\u003eInsert stem from inside rim until it snaps into place\u003c\/li\u003e\n  \u003cli\u003eUse a valve stem puller or hand tool to seat securely\u003c\/li\u003e\n  \u003cli\u003eReinflate to recommended pressure and check for leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and what support is offered?\u003c\/h3\u003e\n\u003cp\u003eThis kit contains fifty TR-600HP snap-in valve stems packaged for bulk replacement or shop use. BLACKHORSE-RACING includes product support and a satisfaction promise—contact customer service by email if you encounter fitment questions or defects. Keep installation accessories (valve caps and pullers) on hand, since they are not included in this set.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 50 x TR-600HP snap-in valve stems\u003c\/li\u003e\n  \u003cli\u003eMaterials: rubber body with brass stem and brass core\u003c\/li\u003e\n  \u003cli\u003eNot included: valve caps, puller tools, or mounting hardware\u003c\/li\u003e\n  \u003cli\u003eCustomer support available via email for assistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 50-piece BLACKHORSE-RACING TR-600HP kit is intended for fleet managers, repair shops, trailer and RV owners, mechanics, and DIY enthusiasts who need a reliable, bulk source of high-pressure snap-in valve stems. If you service multiple vehicles or prefer stocking replacement parts for seasonal maintenance, this kit provides compatibility with common 0.453\" valve holes and a durable construction suited for heavy-duty use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my wheel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit wheels with a 0.453\" (11.5 mm) valve hole and require a 1-1\/4\" stem length. Measure your rim hole to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are valve cores included and leak-tested?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; each stem has a brass core and every unit is factory leak-tested for airtight performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67588417552569,"sku":"B09T2SKGJM","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-packaging-tr-600hp-valve-stems.jpg?v=1790518652"},{"product_id":"blackhorse-racing-rv-step-covers-22-wide-3-pack-wrap-stair-rugs-with-spring-hooks-machine-washable-non-slip-polyester","title":"BLACKHORSE-RACING RV Step Covers 22\" Wide 3-Pack — Wrap Stair Rugs with Spring Hooks, Machine-Washable Non‑Slip Polyester","description":"\u003cb\u003eThese are three 22\" wide, wrap-style RV step covers from BLACKHORSE-RACING that protect metal steps, scrape dirt, and add non‑slip footing with spring‑hook attachments.\u003c\/b\u003e\n\n\u003cp\u003eIf you want an easy way to keep your camper entrance cleaner, safer, and more comfortable, these RV step rugs offer a practical upgrade without tools. Each carpeted cover measures to fit standard 22\" wide stairs and includes paired grommets with stainless steel springs so the rug conforms to flat or slightly curved steps. The polyester face is soft underfoot yet tough enough for repeated outdoor use and machine washing.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these step covers keep my RV cleaner?\u003c\/h3\u003e\n\u003cp\u003eThe low‑pile polyester fibers act as a scraper and trapper for dirt, sand, and debris before it gets inside. When you step on the cover, the textured surface removes loose particles from shoes and paws. Cleaning is simple — shake, vacuum, or toss the rugs in the wash.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20\" long by 22\" wide surface area captures dirt from most shoes\u003c\/li\u003e\n  \u003cli\u003eDouble‑layer reinforcement in high‑wear zones resists abrasion\u003c\/li\u003e\n  \u003cli\u003eMachine washable polyester for fast, repeated cleaning\u003c\/li\u003e\n  \u003cli\u003eTraps grit to reduce interior vacuuming and floor marks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these covers stay attached during travel?\u003c\/h3\u003e\n\u003cp\u003eYes — each cover includes four pairs of grommets and stainless steel springs that hook securely to the step edge. The spring hooks are corrosion resistant and provide tension so the rug wraps the step profile and resists sliding. You can reposition the springs to fit steps 8–10\" deep or curved ladder‑style treads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour paired grommet locations for customized fit per step\u003c\/li\u003e\n  \u003cli\u003eStainless steel springs resist rust and keep tension during motion\u003c\/li\u003e\n  \u003cli\u003eAdjustable hook positions accommodate varying step depths\u003c\/li\u003e\n  \u003cli\u003eWrap design prevents bunching and reduces trip hazards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these rugs improve safety and comfort?\u003c\/h3\u003e\n\u003cp\u003eThe rugs add grip to smooth metal treads and provide a cushioned surface for bare feet and pets. While not a specialized anti‑slip adhesive, the cover’s textured polyester reduces skidding and shields feet from hot metal surfaces. The wrap style also covers step holes and edges that could catch toes or paws.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTextured surface enhances traction on wet or metallic steps\u003c\/li\u003e\n  \u003cli\u003eCovers step holes and sharp edges to protect feet and paws\u003c\/li\u003e\n  \u003cli\u003eSoft polyester improves comfort when stepping barefoot\u003c\/li\u003e\n  \u003cli\u003eReduces surface heat transfer from sun‑heated metal treads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and low‑maintenance are these stair rugs?\u003c\/h3\u003e\n\u003cp\u003eManufactured from 100% polyester with double‑layer reinforcement where wear is greatest, these covers withstand regular foot traffic without quick fraying. When the rug needs refreshment, remove the spring hooks and launder according to care instructions. The materials are chosen to balance longevity with easy cleaning for seasonal camping use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% polyester construction resists fading and abrasion\u003c\/li\u003e\n  \u003cli\u003eDouble‑layered areas extend service life in high‑contact zones\u003c\/li\u003e\n  \u003cli\u003eMachine washable — simply detach springs before washing\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand outdoor use and repeated installation cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: RV owners, campervan travelers, and seasonal campers who want a low‑cost, no‑tool solution to reduce tracking dirt into their vehicle and add a safer, more comfortable step surface. It’s also helpful for pet owners who need to protect paws and for anyone with metal steps that get hot or slippery. The 3‑pack covers multiple entry steps or provides spares for quick swaps when laundering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my 22\" RV steps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each rug is 22\" wide and 20\" long, designed to fit standard 22\" wide steps and adjustable for 8–10\" deep treads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How are the covers secured to the step?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fasten with paired grommets and stainless steel spring hooks that tension the rug around the step edge.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67588449665209,"sku":"B09XDX7NN9","price":92.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view-pack-of-3.jpg?v=1790518916"},{"product_id":"blackhorse-racing-14-slim-electric-radiator-fan-14-7-diameter-12v-900-cfm-push-pull-2-64-thin-mount-kit","title":"BLACKHORSE-RACING 14\" Slim Electric Radiator Fan 14.7\" Diameter — 12V 900 CFM Push-Pull, 2.64\" Thin Mount Kit","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING's 14-inch slim 12V electric radiator fan kit is a reversible push-pull cooling solution that delivers up to 900 CFM in a low-profile 2.64\" thickness for universal fitment on radiators and auxiliary cooling systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis slim fan assembly combines high airflow, a compact profile and a full mounting kit so you can add or replace forced-air cooling without major modification. Designed for engine bays with tight clearance, the fan runs at roughly 2000 RPM and is rated at 90W for steady performance across radiators, intercoolers, oil coolers, and A\/C condensers. The package includes brackets, tie straps and clear instructions to help with a straightforward install on many vehicle makes and models.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this fan improve cooling when space is limited?\u003c\/h3\u003e\n\u003cp\u003eThe slim 2.64\" thickness allows the fan to sit closer to tight radiator passages while still moving large volumes of air. Its slim profile is ideal for compact engine bays where a traditional deep-mount fan won't fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e14.72\" diameter blades provide high sweep area for more airflow.\u003c\/li\u003e\n  \u003cli\u003eLow profile reduces clearance conflicts with shrouds and hoses.\u003c\/li\u003e\n  \u003cli\u003e90W motor keeps consistent RPM under load for reliable cooling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use the fan as both a pusher and a puller?\u003c\/h3\u003e\n\u003cp\u003eYes — the motor and blade orientation are reversible, so the fan can be mounted to push air into the radiator or pull air through it, depending on your setup and cooling goals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReversible mounting supports push or pull configurations.\u003c\/li\u003e\n  \u003cli\u003eMount kit includes hardware to adapt to different radiator faces.\u003c\/li\u003e\n  \u003cli\u003eWorks as an auxiliary fan for A\/C condensers, intercoolers and transmissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat mounting and electrical parts are included for installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with metal mounting brackets, tie straps and basic instructions so you have what you need to secure the fan and wire it into a vehicle's 12V system. It’s geared for DIY installs and for shops performing modifications or replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable brackets fit a range of radiator thicknesses and frames.\u003c\/li\u003e\n  \u003cli\u003eTie straps and fasteners for secure, vibration-resistant mounting.\u003c\/li\u003e\n  \u003cli\u003eElectrical connector and wiring guidance included in the instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and cooling tasks is this fan best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis universal fan is intended for many cars, trucks and performance builds where radiator size and available space match the 14\" diameter and slim depth. It excels as an auxiliary or replacement fan for overheating prevention and improved A\/C or intercooler performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits most radiators that accommodate a ~14.7\" diameter fan.\u003c\/li\u003e\n  \u003cli\u003eGood for tight engine bays, aftermarket intercoolers and retrofits.\u003c\/li\u003e\n  \u003cli\u003eNot vehicle-specific; confirm measurements against your radiator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BLACKHORSE-RACING 14\" slim fan kit is intended for car and truck owners, performance tuners, and mechanics needing high airflow in limited spaces. Choose this kit if you want a reversible push\/pull fan with robust airflow (up to 900 CFM), corrosion-resistant construction and a full set of mounting hardware to adapt to a wide range of radiators and auxiliary cooling applications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this 14\" fan fit my radiator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Measure your radiator opening to confirm it accepts a ~14.72\" diameter fan and check available depth of at least 2.64\" for proper clearance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the fan reversible for push or pull use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the unit can be mounted to either push air into or pull air through the radiator for flexible cooling setups.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67588725735609,"sku":"B014KK7S28","price":96.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view-14-inch-fan.jpg?v=1790523238"},{"product_id":"blackhorse-racing-12-slim-electric-radiator-cooling-fan-kit-12v-800-cfm-10-blade-low-profile","title":"BLACKHORSE-RACING 12\" Slim Electric Radiator Cooling Fan Kit — 12V 800 CFM, 10-Blade Low-Profile","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 12-inch slim 12V electric radiator cooling fan kit is a compact, high-flow puller designed to improve heat management for radiators, A\/C condensers, intercoolers and engine bays.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis universal mounting kit pairs a slim 10-blade 12.44\" fan with brackets and tie straps so you can install extra cooling where space is tight. The fan delivers up to 800 CFM and runs at about 2000 RPM while drawing under 7.5 amps, making it suitable for many vehicles and auxiliary cooling needs. Its low-profile design and durable materials help resist heat and corrosion for longer service life in demanding engine compartments.\u003c\/p\u003e\n\n\u003ch3\u003eHow much airflow and power does this fan deliver?\u003c\/h3\u003e\n\u003cp\u003eThe BLACKHORSE-RACING 12\" fan moves substantial air for its size: a peak maximum of 800 CFM and a rated speed near 2000±10% RPM. It runs on 12V electrical systems and draws no more than 7.5 amps, balancing performance with reasonable electrical load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum airflow: 800 CFM\u003c\/li\u003e\n  \u003cli\u003eBlade count: 10 blades for optimized flow\u003c\/li\u003e\n  \u003cli\u003eNominal speed: ~2000 RPM (±10%)\u003c\/li\u003e\n  \u003cli\u003ePower draw: ≤7.5 amps at 12V, 80W motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this slim fan fit my radiator or condenser space?\u003c\/h3\u003e\n\u003cp\u003eThe fan’s slim profile is made for tight engine bays where depth is limited. Overall diameter is 12.44\" with a thickness of about 2.36\", so confirm those dimensions against your radiator or A\/C condenser clearance before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall diameter: 12.44 inches\u003c\/li\u003e\n  \u003cli\u003eThickness (depth): 2.36 inches\u003c\/li\u003e\n  \u003cli\u003eUniversal mount kit includes brackets and tie straps for varied installations\u003c\/li\u003e\n  \u003cli\u003eBest used as an auxiliary puller behind radiators and condensers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and heat-resistant is the construction?\u003c\/h3\u003e\n\u003cp\u003eThe fan is built with materials selected for heat and corrosion resistance to withstand under-hood conditions. That durability helps maintain consistent performance in hot environments and extends the usable life of the electric radiator fan assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlim shroud design minimizes exposure while providing clearance\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant components for longevity\u003c\/li\u003e\n  \u003cli\u003eElectrical motor rated at 80W for continuous auxiliary use\u003c\/li\u003e\n  \u003cli\u003eIncluded bracketry designed for secure mounting in vibration-prone areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and systems can this fan support?\u003c\/h3\u003e\n\u003cp\u003eThis kit is universal, intended as an auxiliary cooling solution for many cars, trucks, ATVs and custom projects. Suitability depends on the radiator or condenser’s physical size and the airflow requirements of the cooling task.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits a wide range of radiators, intercoolers and A\/C condensers\u003c\/li\u003e\n  \u003cli\u003eUseful for engine bays with limited clearance where slim fans are required\u003c\/li\u003e\n  \u003cli\u003eWorks as additional airflow for transmissions, oil coolers, and aftermarket setups\u003c\/li\u003e\n  \u003cli\u003eMount kit enables flexible placement and orientation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BLACKHORSE-RACING 12\" Slim Fan Pull Electric Radiator Cooling Kit is aimed at DIY mechanics, tuners and vehicle owners who need extra cooling but have limited space. It suits people adding auxiliary fans to improve radiator or condenser airflow, those replacing compact factory fans, and builders of custom cooling setups who want a balance of high airflow, low depth and durable construction. If you are matching fan dimensions and electrical load to your vehicle’s needs, this kit is a practical, universal option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this fan be used as a puller behind my radiator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The slim design is suitable for puller applications behind radiators or condensers, provided you check the 12.44\" diameter and 2.36\" depth fit your space.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What electrical draw should I expect from this 12V fan?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Expect up to 7.5 amps at 12V with an 80W motor and a top speed around 2000 RPM.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67588726063289,"sku":"B014KK7Q84","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view-mounted-on-radiator.jpg?v=1790523258"},{"product_id":"blackhorse-racing-10-slim-12v-electric-radiator-fan-kit-80w-push-pull-thermostat-mount-kit-800-cfm","title":"BLACKHORSE-RACING 10\" Slim 12V Electric Radiator Fan Kit — 80W Push-Pull, Thermostat \u0026 Mount Kit, 800 CFM","description":"\u003cstrong\u003eBLACKHORSE-RACING 10\" Universal Slim Fan is a 12V, 80W push-pull electric radiator cooling fan kit that delivers up to 800 CFM with an included thermostat, wiring switch, relay and mount hardware for reliable engine bay cooling.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact, high-performance cooling assembly is built to fit most radiators and tight engine compartments where space is limited. With a slim 2.536\" profile, six aerodynamic blades and a max speed around 2400 RPM, this fan provides strong airflow while keeping electrical draw under 6 amps. The kit adds a threaded brass thermostat probe and adapter for automatic on\/off control at preset temperatures, plus wiring components and mounting parts to simplify installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the fan improve cooling in cramped engine bays?\u003c\/h3\u003e\n\u003cp\u003eThe slim form factor lets the fan sit closer to the radiator core and fit where thicker fans won't, improving airflow across the fins without interfering with nearby components. The push-pull configuration enhances pressure and flow for more efficient heat transfer across the radiator surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall diameter: 11.42\"; blade count: 6 for balanced airflow\u003c\/li\u003e\n  \u003cli\u003eThickness: 2.536\", ideal for tight clearances\u003c\/li\u003e\n  \u003cli\u003eMaximum flow: up to 800 CFM at ~2400 RPM\u003c\/li\u003e\n  \u003cli\u003eCurrent draw: ≤ 6A, compatible with most 12V systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the included thermostat kit do and how is it set up?\u003c\/h3\u003e\n\u003cp\u003eThe thermostat probe automatically triggers the fan when the coolant reaches the kit's turn-on temperature and shuts it off as it cools, providing hands-free regulation of engine bay temperature. The brass probe uses a 3\/8\" NPT thread and a 1\/2\" NPT adapter is included so you can fit common coolant ports or threaded ports in aftermarket setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn-on temperature: 180°F; turn-off: 165°F for automatic cycling\u003c\/li\u003e\n  \u003cli\u003eProbe: 3\/8\" NPT brass with supplied 1\/2\" NPT adapter\u003c\/li\u003e\n  \u003cli\u003eWiring: includes relay, switch and harness for reliable electrical control\u003c\/li\u003e\n  \u003cli\u003eSimple plumbing: thread-in design suits many radiators and adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this fan suitable for my vehicle or aftermarket cooling upgrades?\u003c\/h3\u003e\n\u003cp\u003eThe BLACKHORSE-RACING fan is universal and best chosen by matching the fan diameter and thickness to your radiator's available space. It's intended as an auxiliary or replacement fan for radiators, A\/C condensers, intercoolers, oil coolers and transmission coolers on a wide range of cars, trucks and custom builds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal fit — check radiator opening and clearance before buying\u003c\/li\u003e\n  \u003cli\u003eWorks with A\/C systems, intercoolers, oil and transmission coolers\u003c\/li\u003e\n  \u003cli\u003eGood heat and corrosion resistance for extended service life\u003c\/li\u003e\n  \u003cli\u003eMount kit supplied to simplify installation on many setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers, DIY mechanics and shop technicians looking for a compact, efficient cooling solution for tight engine bays, aftermarket radiators or upgraded cooling systems. Choose this fan when you need strong airflow (up to 800 CFM) without sacrificing clearance, want automatic thermal control at 180°F, and need a plug-and-play kit that includes a probe, switch, relay and mounting hardware. If you have an unusually sized radiator opening, confirm dimensions (11.42\" OD, 2.536\" thickness) before purchase to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature does the thermostat turn the fan on and off?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The included thermostat turns the fan on at 180°F and off at 165°F.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fan fit my radiator opening?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Measure your radiator clearance: fan OD 11.42\" and thickness 2.536\"; confirm mounting space before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67588819943609,"sku":"B07DLTHM7Z","price":87.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-face.jpg?v=1790525710"},{"product_id":"blackhorse-racing-3-pack-40-series-torque-converter-belt-cogged-replacement-for-comet-203785-203785a-manco-12346-7-8in-x-33-7","title":"BLACKHORSE-RACING 3-Pack 40-Series Torque Converter Belt, Cogged replacement for Comet 203785\/203785A \u0026 MANCO 12346, 7\/8in x 33-7\/","description":"\u003cp\u003e\u003cstrong\u003eThese are three genuine BLACKHORSE-RACING 40-series cogged torque-converter belts engineered to replace Comet 203785\/203785A and MANCO 12346 for reliable go-kart drivetrains.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you service a single kart or stock spares for a fleet, this pack gives you three identical belts sized to fit popular 40- and 45-series Torq-A-Verter systems. The belts use a symmetrical cogged tooth profile for smooth engagement with pulley sheaves, offering consistent power transfer and straightforward installation. Their dimensions and tooth pattern match the common OEM references Comet 203785, Comet 203785A and MANCO 12346, making replacements fast and predictable.\u003c\/p\u003e\n\n\u003ch3\u003eWill these belts fit my 40-series torque converter?\u003c\/h3\u003e\n\u003cp\u003eYes — the belts are made to the same spec as common 40-series replacement parts. Confirm your current belt’s width and overall length to ensure a match before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWidth: 7\/8 inch (standard 40-series width)\u003c\/li\u003e\n  \u003cli\u003eOverall length: 33-7\/8 inches (measured around pulley path)\u003c\/li\u003e\n  \u003cli\u003eSymmetrical cogged profile for Torq-A-Verter sheaves\u003c\/li\u003e\n  \u003cli\u003eCross-compatible with Comet 203785\/203785A and MANCO 12346\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these replacement belts under regular use?\u003c\/h3\u003e\n\u003cp\u003eThese belts are designed for everyday go-kart operation and light motorsport use, prioritizing consistent grip and wear resistance. Proper tensioning and alignment extend service life, while replacing in matched sets reduces drivetrain stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCogged tooth design reduces heat buildup and slipping\u003c\/li\u003e\n  \u003cli\u003eRobust compound for abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eMatched three-pack maintains spare availability\u003c\/li\u003e\n  \u003cli\u003eIdeal for routine maintenance schedules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain these belts for best performance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: relieve torque-converter tension, slip the belt onto the sheaves, then restore correct tension and check alignment. Inspect pulleys and clutch surfaces for wear; replacing worn components together prevents premature belt failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways measure belt route before removal\u003c\/li\u003e\n  \u003cli\u003eUse manufacturer torque and tension specs where available\u003c\/li\u003e\n  \u003cli\u003eCheck for frayed edges, missing cogs, or glazing\u003c\/li\u003e\n  \u003cli\u003eKeep a matched spare from this three-pack on hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exact models will these belts replace?\u003c\/h3\u003e\n\u003cp\u003eThese BLACKHORSE-RACING belts are dimensioned to be direct substitutes for several widely used OEM numbers. They are compatible with common Comet and MANCO torque-converter references used across many kart setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces Comet 203785\u003c\/li\u003e\n  \u003cli\u003eReplaces Comet 203785A\u003c\/li\u003e\n  \u003cli\u003eReplaces MANCO 12346\u003c\/li\u003e\n  \u003cli\u003eFits most 40 and 45 series Torq-A-Verter systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Mechanics, trackside crews and kart owners who need an affordable, ready-to-fit replacement belt set will benefit from this three-pack. It's a practical choice for hobbyists maintaining a single kart or teams stocking consumables for multiple machines. If you need dependable fitment to the Comet\/MANCO references and want spare belts on hand, this BLACKHORSE-RACING set is a straightforward, cost-effective solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these belts the right size for Comet 203785?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They match the Comet 203785\/203785A dimensions: 7\/8\" width and 33-7\/8\" length.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many belts are included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This listing includes three identical BLACKHORSE-RACING 40-series cogged belts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67590096683193,"sku":"B097DL49ZR","price":81.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-packaging-belt.jpg?v=1790533635"},{"product_id":"blackhorse-racing-7-slim-radiator-fan-12v-black-800-cfm-push-pull-low-profile-2-64in-thickness-universal-mount-kit","title":"BLACKHORSE-RACING 7\" Slim Radiator Fan 12V Black — 800 CFM Push-Pull Low-Profile 2.64in Thickness Universal Mount Kit","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING’s 7\" slim electric radiator fan kit is a reversible 12V, 80W cooling assembly designed to deliver over 800 CFM in a compact, low-profile package with universal mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact push-pull fan kit combines a thin housing and ten high-efficiency blades to improve airflow through your radiator or oil cooler without occupying excessive engine-bay space. Built for retrofit and performance-support applications, the assembly includes brackets and tie straps so you can mount it to a variety of radiator cores or auxiliary coolers. Materials and finishes emphasize heat and corrosion resistance to withstand under-hood conditions while drawing minimal current.\u003c\/p\u003e\n\n\u003ch3\u003eHow much cooling power does this 7\" fan provide?\u003c\/h3\u003e\n\u003cp\u003eThe fan delivers strong airflow for its size: rated to produce at least 800 CFM and spin up to approximately 2,900 RPM (±10%). With an 80W motor running on 12V, it keeps current draw at or below 5 amps, making it efficient for add-on cooling tasks. Its 10-blade geometry is tuned to move air effectively through dense fins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated airflow: ≥800 CFM\u003c\/li\u003e\n  \u003cli\u003eMotor power: 80W at 12V\u003c\/li\u003e\n  \u003cli\u003eTop speed: ~2,900 RPM ±10%\u003c\/li\u003e\n  \u003cli\u003eCurrent draw: ≤5 amps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the slim design fit my vehicle and clear other components?\u003c\/h3\u003e\n\u003cp\u003eThe fan’s low-profile construction minimizes thickness (about 2.64 inches), so it’s easier to tuck in tight engine bays or behind aftermarket radiators. Overall diameter measures roughly 8.27 inches, making it suitable where a standard 7\" blade is specified but space is constrained. Supplied brackets, straps, and versatile mounting points accommodate many radiator types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall diameter: 8.27 inches\u003c\/li\u003e\n  \u003cli\u003eThickness: approx. 2.64 inches\u003c\/li\u003e\n  \u003cli\u003eIncludes mount brackets and tie straps\u003c\/li\u003e\n  \u003cli\u003eDesigned for tight-clearance installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this fan operate as both a pusher and a puller?\u003c\/h3\u003e\n\u003cp\u003eYes — the BLACKHORSE-RACING fan is reversible and engineered to work as either a pusher (blowing air into the radiator) or a puller (drawing air through the core). That flexibility helps when planning airflow strategy: use it to augment the vehicle’s factory fan or as an auxiliary cooler fan for intercoolers, oil coolers, or aftermarket radiators.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReversible airflow for push or pull setups\u003c\/li\u003e\n  \u003cli\u003eCompatible as auxiliary or replacement fan\u003c\/li\u003e\n  \u003cli\u003eUseful for intercoolers, radiators, and oil coolers\u003c\/li\u003e\n  \u003cli\u003eEasy to reposition thanks to included hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and service support can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe fan assembly is built with materials and coatings that resist heat and corrosion commonly found in engine compartments, extending service life and reliability. BLACKHORSE-RACING includes mounting hardware and a user reference in the primary product visuals to simplify installation, and they offer customer support if you encounter issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-resistant and corrosion-resistant construction\u003c\/li\u003e\n  \u003cli\u003eComes with mounting brackets and tie straps\u003c\/li\u003e\n  \u003cli\u003eReference instructions provided in product images\u003c\/li\u003e\n  \u003cli\u003eCustomer support available via email for assistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, DIY enthusiasts, and performance-minded drivers who need compact, high-flow cooling in tight spaces will appreciate this kit. It’s best suited for vehicles where a standard fan won’t clear other components or where supplemental cooling is required for radiators, charge-air coolers, or oil coolers. Mechanics and custom-fabrication shops will also value the universal mounting options and low electrical load when integrating the fan into existing systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this fan compatible with my radiator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s universally designed but depends on radiator size and mounting space; check the 8.27\" diameter and 2.64\" thickness for fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much current does the fan draw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The fan draws no more than 5 amps at 12V, thanks to its 80W motor and efficient design.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67591257358521,"sku":"B014KK7M06","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view_4f24fea2-0313-4b37-b540-f0fcdea7730a.jpg?v=1790545395"},{"product_id":"blackhorse-racing-10-slim-electric-radiator-fan-kit-red-12v-push-pull-800-cfm","title":"BLACKHORSE-RACING 10\" Slim Electric Radiator Fan Kit - Red, 12V Push-Pull, 800 CFM","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING's 10\" slim 12V push-pull electric radiator cooling kit is a universal mounting fan assembly designed to increase radiator airflow and lower engine bay temperatures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, high-output cooling fan is built to fit a wide range of cars, trucks and aftermarket radiators. The assembly combines a slim-profile 10-inch (11.42\" measured diameter) six-blade fan with reversible push\/pull operation, corrosion-resistant construction and a full mounting kit so you can install it directly to most radiators or support brackets. With a peak rating near 800 CFM and 2400+ RPM, it’s intended to help supplemental cooling for radiators, intercoolers, A\/C condensers, oil coolers and transmissions in tight engine bays.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this slim fan differ from a standard radiator fan?\u003c\/h3\u003e\n\n\u003cp\u003eThe BLACKHORSE-RACING slim fan delivers high airflow in a low-profile package that preserves engine bay clearance and fits where thicker fans won't. It uses six blades and a compact thickness to balance performance and space-saving. The construction emphasizes heat and corrosion resistance to withstand under-hood conditions and extend service life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSlim thickness of 2.54\" for tighter mounting gaps.\u003c\/li\u003e\n  \u003cli\u003eMeasured diameter 11.42\" (marketed as 10\" nominal).\u003c\/li\u003e\n  \u003cli\u003eHigh output up to ~800 CFM and 2400+ RPM.\u003c\/li\u003e\n  \u003cli\u003eMaterials chosen for heat and corrosion resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this fan be used as a push or pull in different setups?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the unit is reversible for push or pull configurations, allowing you to tailor airflow direction to your vehicle’s cooling layout. Reversibility makes it useful as either a puller mounted to the radiator or a pusher installed in front of it. That flexibility simplifies integration with A\/C condensers, intercoolers or custom mounting brackets.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReversible motor for push or pull operation.\u003c\/li\u003e\n  \u003cli\u003eMount brackets and tie straps included for multiple attachment styles.\u003c\/li\u003e\n  \u003cli\u003eWorks with front- or rear-mounted radiator installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and systems is this universal kit compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThe fan is a universal auxiliary cooling accessory, suitable for many cars, light trucks, performance projects and aftermarket radiators, depending on radiator dimensions. It is commonly used to supplement factory cooling, assist A\/C condenser performance, or support intercoolers and oil\/transmission coolers. Always verify physical fit and airflow direction before final mounting.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits many radiator sizes that accept an ~11.4\" diameter fan.\u003c\/li\u003e\n  \u003cli\u003eUseful for radiators, A\/C condensers, intercoolers, oil and transmission coolers.\u003c\/li\u003e\n  \u003cli\u003eBest for vehicles needing extra airflow in tight engine bays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain this electric cooling fan kit?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation typically involves mounting the fan to the radiator or support with the supplied brackets and using the included tie straps for secure attachment. Electrical connection requires a 12V supply and appropriate relay\/fuse for safe operation. Maintenance is minimal: periodic inspection, cleaning debris from blades, and checking mounting hardware and wiring for corrosion or looseness.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMounting hardware and tie straps included for secure fitment.\u003c\/li\u003e\n  \u003cli\u003eRequires 12V power and recommended relay\/fuse wiring for safety.\u003c\/li\u003e\n  \u003cli\u003ePeriodic cleaning and inspection prolongs service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This BLACKHORSE-RACING slim 10\" push-pull fan kit is aimed at DIY mechanics, tuners and fleet owners who need a compact, powerful auxiliary cooling solution. It’s particularly useful where space is limited, when extra condenser or intercooler airflow is needed, or as an affordable aftermarket upgrade to help manage elevated engine-bay temperatures. If you plan to boost cooling capacity, run heavy A\/C loads, tow, or tune for higher power outputs, this universal fan provides a flexible, easy-to-fit option. For compatibility questions or installation guidance, BLACKHORSE-RACING customer support is available to assist.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fan need a relay or special wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Use a 12V power source with a proper relay and fuse for safe operation and reliable performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fan fit my radiator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Measure radiator clearance and confirm an ~11.4\" diameter fits; mounting brackets allow flexible attachment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67591303266489,"sku":"B014KK7NIM","price":77.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view-red-fan.jpg?v=1790546668"},{"product_id":"blackhorse-racing-10-slim-electric-radiator-fan-kit-12v-push-pull-800-cfm-universal-mount","title":"BLACKHORSE-RACING 10\" Slim Electric Radiator Fan Kit - 12V Push\/Pull, 800 CFM, Universal Mount","description":"\u003cstrong\u003eBLACKHORSE-RACING 10\" Slim Fan Push Pull Kit is a reversible 12V, 80W slim-profile radiator cooling fan with universal mounting hardware designed to improve airflow for radiators, condensers, intercoolers and engine bays.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact cooling fan kit pairs a 10-inch, six-blade high-flow fan with brackets and tie straps so you can install a push or pull configuration where clearance is limited. With a thin 2.536\" profile and corrosion-resistant construction, it’s built to fit tight engine compartments while delivering up to 800 CFM at about 2400 RPM. The kit is intended as an auxiliary cooling solution adaptable to many vehicles and systems rather than a replacement for factory cooling systems.\u003c\/p\u003e\n\n\u003ch3\u003eHow much cooling performance can I expect from this slim 10\" fan?\u003c\/h3\u003e\n\n\u003cp\u003eThe fan delivers up to 800 CFM with a maximum speed around 2400 RPM (±10%) while drawing no more than 6 amps at 12V. Its six-blade design balances airflow and noise to move a significant volume of air despite the slim housing. Expect meaningful airflow improvements across a radiator or condenser, especially when used as a supplemental fan.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaximum airflow: 800 CFM\u003c\/li\u003e\n  \u003cli\u003eRated power: 80W at 12V\u003c\/li\u003e\n  \u003cli\u003ePeak speed: ~2400 RPM (±10%)\u003c\/li\u003e\n  \u003cli\u003eCurrent draw: ≤6 A for efficient operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this slim fan fit my vehicle and where should I mount it?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit is universal and designed to fit a wide range of radiators, condensers and intercoolers as long as the opening and mounting points are compatible with an 11.42\" overall diameter. The slim 2.536\" thickness provides better clearance near shrouds and other tight spots. Use the included brackets and tie straps to secure the fan as a puller or pusher depending on your airflow goals and available space.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOverall diameter: 11.42\" to match radiator openings\u003c\/li\u003e\n  \u003cli\u003eThickness: 2.536\" for tight engine bays\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting brackets and tie straps for flexible installation\u003c\/li\u003e\n  \u003cli\u003eReversible mounting for push or pull configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the fan durable and suitable for under-hood use?\u003c\/h3\u003e\n\n\u003cp\u003eThe fan assembly uses materials chosen for heat and corrosion resistance to withstand typical engine bay environments. The slim housing helps avoid contact with moving parts while maintaining structural integrity. While robust, it remains an aftermarket auxiliary fan and should be inspected periodically like any under-hood component.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSlim, heat-resistant housing for tight clearances\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finishes extend service life\u003c\/li\u003e\n  \u003cli\u003eBalanced 6-blade design reduces vibration and wear\u003c\/li\u003e\n  \u003cli\u003eInstall according to instructions for best durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the kit?\u003c\/h3\u003e\n\n\u003cp\u003eThe package includes the fan, mounting brackets and tie straps so you can adapt it to many radiator setups without custom fabrication. Wiring is straightforward for a 12V system; follow the provided instructions and use proper fusing and switch or relay for safe operation. If you need help, product support is available to answer fitting or wiring questions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncluded: fan unit, mounting brackets, and tie straps\u003c\/li\u003e\n  \u003cli\u003eSimple 12V wiring — use a relay and fuse for safety\u003c\/li\u003e\n  \u003cli\u003eInstallation guides provided as reference images\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment or wiring help\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e This fan kit suits DIY enthusiasts, mechanics and vehicle owners who need supplemental cooling in tight engine bays — for aftermarket radiators, condensers, intercoolers, oil coolers or transmission coolers. It’s ideal when clearance is limited but increased airflow is required, and for anyone who requires a reversible push\/pull fan solution with simple mounting options.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this fan be used as both a pusher and puller?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The fan is reversible and can be mounted as a pusher or puller using the included brackets and tie straps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What electrical load does the 10\" fan draw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The fan draws up to 6 amps at 12V with an 80W power rating; use a proper fuse and relay when wiring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67591303397561,"sku":"B014KK7OCW","price":77.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view-10-inch-fan.jpg?v=1790546667"},{"product_id":"blackhorse-racing-6in-slim-electric-cooling-fan-for-radiator-oil-cooler-black-650-cfm-push-pull","title":"BLACKHORSE-RACING 6in Slim Electric Cooling Fan for Radiator \u0026 Oil Cooler — Black, 650 CFM Push\/Pull","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 6\" Small Slim Push-Pull Electric Cooling Fan kit is a compact 12V cooling solution that delivers up to 650 CFM for radiator, oil cooler and engine-bay airflow in tight spaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis slim, high-flow fan assembly includes mounting brackets and tie straps for universal installation on radiators, oil coolers, intercoolers and transmission coolers. Designed for compact engine bays and hot rod projects, the 6-inch fan balances space-saving dimensions with strong airflow, running at up to 2250 RPM and 80 watts on a 12V supply. Durable plastic construction resists heat and corrosion while the reversible push\/pull blade configuration adapts to different fan placements and cooling strategies.\u003c\/p\u003e\n\n\u003ch3\u003eHow much airflow and power does this 6\" fan provide?\u003c\/h3\u003e\n\u003cp\u003eThe fan produces a maximum of 650 CFM at 2250 RPM while drawing about 80 watts from a 12V supply. That combination gives a high airflow-to-size ratio, useful when space prevents fitting larger fans.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum CFM: 650 CFM for concentrated airflow over cooler fins.\u003c\/li\u003e\n  \u003cli\u003eVoltage \u0026amp; power: DC 12V, 80W operation suitable for most automotive electrical systems.\u003c\/li\u003e\n  \u003cli\u003eTop speed: Up to 2250 RPM for strong, sustained airflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it as a push or a pull fan, and how do I switch modes?\u003c\/h3\u003e\n\u003cp\u003eThe fan is reversible so you can set it to push or pull depending on your installation needs. Switching modes only requires swapping the power cord position and flipping the fan blades, making it quick to adapt during fitting or testing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePush\/pull swap: Change power cord orientation and flip the blades to reverse airflow.\u003c\/li\u003e\n  \u003cli\u003eMounting flexibility: Works as an on-radiator push fan or as an off-radiator pull fan.\u003c\/li\u003e\n  \u003cli\u003eInstallation kit: Includes brackets and tie straps for secure attachment in various configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my vehicle or classic engine build?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed as a universal solution for many hot rods, classics and custom builds, and is compatible with a long list of popular V8 and smaller engines. Because it is slim, it fits tight engine bays and is often used where larger fans are impractical.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal fit: Intended for radiators, oil coolers, and transmissions on many makes.\u003c\/li\u003e\n  \u003cli\u003eClassic compatibility: Suited to Chevy, Ford, Pontiac, Buick, Cadillac and similar hot rod engines listed in fitment notes.\u003c\/li\u003e\n  \u003cli\u003eCompact profile: Slim housing ideal for modified or cramped engine compartments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does this fan kit offer?\u003c\/h3\u003e\n\u003cp\u003eConstructed from durable plastic, the fan resists heat and corrosion common in engine environments and maintains consistent flow rates over time. The robust design lowers vibration and noise compared with less-rigid alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable plastic housing: Heat and corrosion resistant for long service life.\u003c\/li\u003e\n  \u003cli\u003eStable operation: Engineered to reduce pump noise and vibration under load.\u003c\/li\u003e\n  \u003cli\u003eComplete kit: Includes brackets and tie straps for secure, vibration-resistant mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Enthusiasts restoring classic cars, performance builders tight on radiator clearance, and anyone needing a powerful, space-saving electric fan for aftermarket oil coolers, intercoolers or compact radiators. If you want a reversible push\/pull fan that fits small engine bays while delivering high airflow and straightforward mounting hardware, this BLACKHORSE-RACING 6\" kit is a practical option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this fan compatible with a 12V car electrical system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The BLACKHORSE-RACING fan runs on DC 12V and draws about 80W, compatible with standard automotive systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I switch this fan between push and pull modes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Reverse the airflow by flipping the fan blades and changing the power cord orientation for push or pull operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67591382139065,"sku":"B07T65FBR1","price":66.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-6inch-front-view.jpg?v=1790549233"},{"product_id":"blackhorse-racing-3-pc-725-go-kart-drive-belt-kit-30-series-fit-reinforced-rubber-for-reliable-power-transfer","title":"BLACKHORSE-RACING 3-Pc 725 Go Kart Drive Belt Kit — 30-Series Fit, Reinforced Rubber for Reliable Power Transfer","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 3-piece 725 drive belt kit — a durable aftermarket replacement engineered to fit 30-series torque converters on Hammerhead and TrailMaster mid karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese three 725 asymmetrical drive belts are built from reinforced rubber to provide consistent power transfer, heat and oil resistance, and long service life. Designed as a direct-fit aftermarket option, the set suits many 30-series torque-converter setups commonly found on mid karts; some vehicles may instead use a 669 belt, so verify your current belt size before ordering. The kit simplifies maintenance by supplying multiple belts for rotation or spare use.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these belts affect acceleration and power delivery?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn belts with the correct 725 size helps restore predictable engagement and reduces slipping under load. These belts are asymmetrical to match the contact geometry of many torque converters, improving torque transfer consistency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves clutch engagement compared to stretched or glazed belts\u003c\/li\u003e\n  \u003cli\u003eReduces slippage during peak RPMs for steadier acceleration\u003c\/li\u003e\n  \u003cli\u003eConsistent traction thanks to reinforced rubber construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these belts compatible with my Hammerhead or TrailMaster mid kart?\u003c\/h3\u003e\n\u003cp\u003eThe kit is made to fit 30-series torque converters used on many Hammerhead and TrailMaster mid karts, but compatibility depends on the original belt size. Inspect your existing belt for size markings; if it reads 725, this kit is a direct replacement. Some models use a 669 belt instead, which would not be interchangeable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntended for 30-series torque-converter systems\u003c\/li\u003e\n  \u003cli\u003eConfirm your current belt size (look for \"725\" stamping)\u003c\/li\u003e\n  \u003cli\u003eThree belts provided for spares or staggered wear replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes these belts durable and reliable in varied conditions?\u003c\/h3\u003e\n\u003cp\u003eConstructed from high-quality rubber compounds, these belts resist oil and heat while maintaining flexibility across temperature swings. The design is aimed at high mileage and dependable performance, minimizing the need for frequent replacement when used under normal riding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOil and heat resistant rubber to withstand drivetrain exposure\u003c\/li\u003e\n  \u003cli\u003eSturdy construction helps prevent premature cracking or glazing\u003c\/li\u003e\n  \u003cli\u003eAsymmetrical profile matches torque-converter contact surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance for a home mechanic?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with basic clutch and belt procedures on mid karts. No specialty tools are required beyond standard hand tools and a safe way to secure the kart; belts should be checked regularly for wear and alignment. Keep a spare from the kit on hand for quick roadside replacement if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple fit-and-replace process for direct-replacement belts\u003c\/li\u003e\n  \u003cli\u003eRotate or replace belts when visible wear or slippage appears\u003c\/li\u003e\n  \u003cli\u003eThree-belt kit reduces downtime by providing backups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BLACKHORSE-RACING 3-pack of 725 drive belts is aimed at owners and mechanics of Hammerhead and TrailMaster-style mid karts with 30-series torque converters who want a reliable aftermarket replacement or spare set. It’s useful for track crews, recreational riders, and DIYers who prefer to keep extra belts available for routine maintenance or quick swaps during events. Confirm belt size before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these 725 belts fit my TrailMaster mid kart?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit TrailMaster mid karts that use a 30-series torque converter stamped 725. Check your current belt for the 725 marking to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Why buy three belts in one kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The trio gives spares for quick swaps, rotation to extend life, or replacement for multiple machines, reducing downtime.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67591450591417,"sku":"B08GWQLHTM","price":64.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-packaging-725-belt.jpg?v=1790551517"},{"product_id":"blackhorse-racing-hammer-lock-safety-chain-connector-1-2-in-red-grade-80-12-000-lb-wll","title":"BLACKHORSE-RACING Hammer Lock Safety Chain Connector 1\/2 in Red — Grade 80, 12,000 lb WLL","description":"\u003cp\u003e\u003cstrong\u003eBLACKHORSE-RACING 1\/2\" Grade 80 hammer lock safety chain connector link is a heavy-duty, rust-resistant coupling designed to secure trailer safety chains with a 12,000 lb working load limit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis two-piece set from BLACKHORSE-RACING is built for demanding towing tasks where a compact, robust chain connector is required. Constructed from Grade 80 alloy steel and finished in a red powder coat, the hammer lock coupling delivers strong, reliable retention for safety chains, with installation done quickly using a pin and hammer or C-clamp. The design focuses on strength, corrosion resistance, and simple field serviceability for automotive and utility towing applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow strong is this hammer lock coupling for towing and safety chains?\u003c\/h3\u003e\n\u003cp\u003eThe connector is rated with a Working Load Limit (WLL) of 12,000 lbs and uses Grade 80 alloy steel to provide high tensile strength in a compact form factor. It meets the expectations for heavy-duty chain safety use on trailers, trucks, and utility equipment where a secure connection is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: G80 heavy-duty alloy steel for improved tensile strength.\u003c\/li\u003e\n  \u003cli\u003eWLL: 12,000 lbs stated working load limit for safety chain duties.\u003c\/li\u003e\n  \u003cli\u003eDesign: hammer lock pin with locking ring for secure retention under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat prevents corrosion and wear during outdoor use?\u003c\/h3\u003e\n\u003cp\u003eBLACKHORSE-RACING applies a red powder-coat finish to the steel surfaces to resist rust and protect the connector from abrasion and elements. Proper greasing of the pin during installation further reduces friction and extends service life in harsh conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFinish: red powder coating for rust and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eMaintenance: add light grease to the pin before installation to minimize wear.\u003c\/li\u003e\n  \u003cli\u003eDurability: Grade 80 alloy resists deformation under repeated towing cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the 1\/2\" hammer lock coupling on my safety chain?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: align the coupling with the chain link or anchor, insert the pin through the coupling and locking ring, then seat the pin with a hammer or C-clamp. The locking ring snaps into place to prevent accidental withdrawal during use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreparation: apply a small amount of grease to the end of the pin for smoother seating.\u003c\/li\u003e\n  \u003cli\u003eTools: use a hammer or C-clamp to drive the pin fully into the locking ring.\u003c\/li\u003e\n  \u003cli\u003eCheck: ensure the locking ring is fully engaged before towing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and applications is this coupling compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe 1\/2\" hammer lock coupling is commonly used as a safety chain connector for light- and medium-duty trucks, trailers, and utility vehicles. It works well with many domestic truck makes and aftermarket towing setups where a secure chain link is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon use: safety chain kits for Chevy, Ford, GMC, and similar vehicles.\u003c\/li\u003e\n  \u003cli\u003eVersatility: suitable for trailers, utility equipment, and temporary chain repairs.\u003c\/li\u003e\n  \u003cli\u003ePack: sold as a two-piece set so you can outfit both sides of a trailer safety chain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BLACKHORSE-RACING 1\/2\" Grade 80 hammer lock connector is intended for vehicle owners, fleet operators, and DIY trailer users who need a rugged, compact link for safety chains. It's especially suited to those who tow frequently, maintain trailers, or require a dependable spare connector for roadside repairs. If you prioritize strength, corrosion resistance, and quick field installation, this coupling provides a practical, long-lasting solution backed by a customer satisfaction guarantee.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this connector safe for heavy towing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It has a 12,000 lb working load limit and Grade 80 alloy steel construction for heavy-duty safety chain use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I install the hammer lock pin?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Grease the pin end, align through the coupling and locking ring, then seat it with a hammer or C-clamp.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67593062351033,"sku":"B0BGHMJN7J","price":65.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-front-view_4b5942da-e1f7-435f-9f1c-678eb04f02da.jpg?v=1790571481"},{"product_id":"blackhorse-racing-hpop-high-pressure-oil-pump-seal-base-gasket-kit-for-ford-7-3l-1994-2003-complete-seal-set","title":"BLACKHORSE-RACING HPOP High-Pressure Oil Pump Seal \u0026 Base Gasket Kit for Ford 7.3L (1994–2003) — Complete Seal Set","description":"\u003cp\u003e\u003cstrong\u003eComplete HPOP high-pressure oil pump seal and base gasket kit engineered to restore leak-free operation on Ford 7.3L engines (1994–2003).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis BLACKHORSE-RACING HPOP kit supplies the seals, O-rings, and base gasket required to service the high-pressure oil pump and regulator on 7.3L Power Stroke engines. The set replaces common OE part numbers (F6TZ-9417-AA, 2C3Z-9G804-AB, 4C3Z-9C977-AA) and includes extra components often omitted from aftermarket kits so you can complete a thorough rebuild without sourcing additional parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains all seals and O-rings needed to disassemble and correctly reassemble the HPOP and its mounting interface, plus a precision-cut base gasket to stop leaks where the pump meets the engine block.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull complement of regulator seals and O-rings for internal leak prevention\u003c\/li\u003e\n  \u003cli\u003eHigh-quality base gasket to replace the pump-to-block seal\u003c\/li\u003e\n  \u003cli\u003eAdditional small seals and retainers typically missing from other kits\u003c\/li\u003e\n  \u003cli\u003eMaterials selected for oil resistance and long-term dimensional stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit improve pump reliability on a 7.3L Power Stroke?\u003c\/h3\u003e\n\u003cp\u003eReplacing aged seals and the base gasket restores correct oil pressure and prevents external leaks that can lead to performance issues. New elastomers and a properly fitting gasket help maintain regulator seating and reduce the risk of fast wear from oil leakage or contamination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStops external oil seepage at the pump mounting surface\u003c\/li\u003e\n  \u003cli\u003eRestores regulator sealing to preserve correct high-pressure oil delivery\u003c\/li\u003e\n  \u003cli\u003eHelps prevent premature component wear due to oil loss or ingress of dirt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this kit compatible with my truck and which OE numbers does it replace?\u003c\/h3\u003e\n\u003cp\u003eThis BLACKHORSE-RACING kit is manufactured to fit Ford 7.3L Power Stroke diesel engines built between 1994 and 2003. It is designed to replace the listed OEM numbers so you can match it to service diagrams and parts lists.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: 1994–2003 Ford 7.3L Power Stroke\u003c\/li\u003e\n  \u003cli\u003eReplaces OE: F6TZ-9417-AA, 2C3Z-9G804-AB, 4C3Z-9C977-AA\u003c\/li\u003e\n  \u003cli\u003eIncludes extra seals found on factory repair diagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and routine maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic mechanical skills and access to standard hand tools and a clean work area. Replace all seals in the kit, torque fasteners to manufacturer specs, and inspect mating surfaces for damage before reassembly to ensure a leak-free result.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean mating surfaces thoroughly before fitting new gasket\u003c\/li\u003e\n  \u003cli\u003eLubricate O-rings with engine oil for easier seating and correct sealing\u003c\/li\u003e\n  \u003cli\u003eFollow torque values from repair manual to avoid distortion or leaks\u003c\/li\u003e\n  \u003cli\u003eInspect pump and regulator components for wear while disassembled\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Owners, DIY mechanics, and professional technicians maintaining 1994–2003 Ford trucks with the 7.3L Power Stroke who need a complete, high-quality HPOP seal solution. It’s especially useful for anyone rebuilding or resealing the high-pressure oil pump and wanting the extra components other kits omit, so the job can be finished without additional parts runs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2001 Ford 7.3L Power Stroke?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit fits Ford 7.3L Power Stroke models from 1994 through 2003, including 2001.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the HPOP base gasket and regulator seals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes the base gasket plus all regulator seals and O-rings required for a full reseal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLACKHORSE-RACING","offers":[{"title":"Default Title","offer_id":67593415753913,"sku":"B07H9L4DBV","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blackhorse-racing-hpop-kit-front-packaging.jpg?v=1790575337"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/blackhorse-racing-hpop-kit-front-packaging.jpg?v=1790612667","url":"https:\/\/redleafauto.ca\/collections\/blackhorse-racing.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}