{"title":"Boatrip","description":"\u003cp\u003eBrowse 32 Boatrip products at RedLeaf Auto, including starters \u0026amp; alternators. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"boatrip-starter-motor-for-bmw-2006-2016-models-direct-fit-17922-100-new-components","title":"Boatrip Starter Motor for BMW 2006–2016 Models — Direct-Fit 17922, 100% New Components","description":"\u003cp\u003e\u003cstrong\u003eThe Boatrip 17922 is a direct-fit replacement starter motor engineered to restore reliable engine starts for specified 2006–2016 BMW models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your BMW shows slow cranking, intermittent starts, or no-crank conditions, a worn or failed starter motor is a common cause. The Boatrip 17922 is built using 100% new components and produced under ISO\/IAFT-compliant processes to match OEM dimensions and electrical characteristics. It’s intended as a plug-and-play swap for many BMW engines across sedans, coupes, SUVs and convertibles listed in the fitment range.\u003c\/p\u003e\n\n\u003ch3\u003eWhich BMW models and years does this starter fit?\u003c\/h3\u003e\n\u003cp\u003eThis Boatrip 17922 starter is designed for a wide range of BMW vehicles from about 2006 through 2016. Fitment includes popular passenger cars and SUVs where the original starter shares the same mounting, gear reduction and electrical connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits models such as 128i, 325i\/325xi, 328i\/328xi, 330i\/330xi, 335i, 525i\/528i\/528xi\/530i\/530xi\/535i\u003c\/li\u003e\n  \u003cli\u003eAlso covers BMW X1, X3, X5, X6 and Z4 variants within the stated years\u003c\/li\u003e\n  \u003cli\u003eMatches OEM mounting bolt pattern and electrical plug for straightforward replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is Boatrip 17922 built and how does that affect durability?\u003c\/h3\u003e\n\u003cp\u003eBoatrip manufactures this starter in a facility certified to IAFT 16949 standards, using premium-grade new components rather than remanufactured parts. That controlled production process helps ensure long-term reliability and consistent performance under the same load and heat cycles experienced in BMW engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% new internal parts—no used cores—minimizing early failure risk\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined housing and gears to maintain correct engagement with the flywheel\u003c\/li\u003e\n  \u003cli\u003eFactory quality control and testing to reduce electrical or mechanical defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and compatibility checks?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be direct-fit when matched to the correct model and engine code. Basic mechanical skills and common hand tools are usually sufficient, but safe battery disconnection and torqueing to OEM specs are important. Always verify the part number and physical mounting before committing to installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect the battery and follow vehicle service manual torque specifications\u003c\/li\u003e\n  \u003cli\u003eCompare the new unit’s bolt pattern, electrical plug and pinion position with the old starter\u003c\/li\u003e\n  \u003cli\u003eAllow 30–90 minutes for an experienced DIYer; dealer or shop times vary\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for?\u003c\/p\u003e\n\u003cp\u003eThe Boatrip 17922 starter is for BMW owners, independent mechanics, and fleet technicians who need a reliable, affordable replacement that aligns closely with OEM fit and performance. It’s suited to people who prefer new-component replacements over remanufactured units and those who value factory-level quality systems and a 2-year warranty for peace of mind. Before purchase, confirm your vehicle’s year, engine variant and original starter configuration to ensure compatible installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter include a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Boatrip 17922 starter includes a 2-year warranty from the date of purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Experienced DIYers can install it in about 30–90 minutes; disconnect the battery and follow torque specs. Verify fitment before installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584887455929,"sku":"B0BM918TMF","price":179.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view.jpg?v=1790457668"},{"product_id":"boatrip-starter-motor-for-nissan-sentra-versa-juke-nv200-s114-902a-oe-fit-1-6-1-8-2-0l-engines-two-year-warranty","title":"Boatrip Starter Motor for Nissan Sentra Versa Juke NV200 – S114-902A OE Fit, 1.6\/1.8\/2.0L Engines, Two-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip replacement starter motor S114-902A (19317693) is a direct-fit, factory-quality unit designed to start 2007–2019 Nissan Sentra and compatible L4 engines with reliable performance and OE-equivalent specifications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Boatrip starter is manufactured to match original-equipment form, fit and function for a range of compact Nissan models and their rebadged variants. Built in a facility certified to automotive quality standards and assembled from new premium components, the unit aims to deliver predictable engagement, accurate mounting, and long service life. It suits drivers or technicians replacing a worn or failed starter on 1.6L, 1.8L and 2.0L four-cylinder engines in listed years and applications.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines is this starter compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis starter is intended for several Nissan models and certain rebadged platforms powered by L4 engines. Confirm year, engine size and OEM part cross-reference before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNissan Sentra: 2007–2019, 1.6L \/ 1.8L \/ 2.0L four-cylinder engines\u003c\/li\u003e\n  \u003cli\u003eNissan Versa: 2007–2012 with 1.8L engine\u003c\/li\u003e\n  \u003cli\u003eNissan Juke: 2011–2017 models\u003c\/li\u003e\n  \u003cli\u003eNissan Cube: 2009–2014 models\u003c\/li\u003e\n  \u003cli\u003eNissan NV200: 2013–2021 compact cargo van\u003c\/li\u003e\n  \u003cli\u003eChevrolet City Express: 2015–2018 (rebadged NV200)\u003c\/li\u003e\n  \u003cli\u003eOEM cross-reference: S114-902A, 19317693\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement compare to the original starter?\u003c\/h3\u003e\n\u003cp\u003eBoatrip units are engineered to meet or exceed OEM performance parameters and use new components rather than reconditioned parts. The result is consistent torque, dependable solenoid action and correct gear engagement at install.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew internal components for predictable life span\u003c\/li\u003e\n  \u003cli\u003eManufactured to OE dimensions for accurate mounting\u003c\/li\u003e\n  \u003cli\u003eSolenoid and drive assembly built for reliable engagement\u003c\/li\u003e\n  \u003cli\u003eQuality control from ISO\/IATF-certified production processes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should a DIYer or mechanic expect during installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when the correct fitment is confirmed. Standard hand tools, basic mechanical experience and battery safety practices are required; removal and replacement typically take under an hour on most applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck battery negative disconnect before starting\u003c\/li\u003e\n  \u003cli\u003eVerify bolt pattern and electrical connector match the vehicle\u003c\/li\u003e\n  \u003cli\u003eMounting holes and shaft align to OEM locations for easy swap\u003c\/li\u003e\n  \u003cli\u003eTorque fasteners to manufacturer specifications after fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances come with this starter?\u003c\/h3\u003e\n\u003cp\u003eBoatrip backs this starter with a two-year warranty and manufactures under established automotive quality standards. The production facility follows IATF 16949 processes and uses systematic quality checks to ensure consistent output.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-year limited warranty from Boatrip\u003c\/li\u003e\n  \u003cli\u003eProduced in an IATF\/ISO-certified facility\u003c\/li\u003e\n  \u003cli\u003eBuilt to meet or surpass OEM tolerances\u003c\/li\u003e\n  \u003cli\u003eFactory-tested for electrical and mechanical function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? This Boatrip starter is suited for vehicle owners, independent mechanics and small repair shops needing a cost-effective, OE-style replacement for failed starters on supported Nissan and rebadged models. It’s ideal when you want a new, precision-made unit with factory-quality production controls and a two-year warranty instead of a rebuilt core.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit a 2010 Nissan Sentra 2.0L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this Boatrip starter lists fitment for 2007–2019 Sentra models including 2.0L engines; verify your OEM part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is electrical wiring included and ready to plug in?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The unit includes standard factory-style terminals; vehicle wiring connects directly but terminal hardware may be required depending on your model.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584938901689,"sku":"B0CKMDBGNR","price":179.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_a79a0c64-96fc-49e3-b2c7-f0c671f69b7f.jpg?v=1790459959"},{"product_id":"boatrip-starter-motor-for-nissan-infiniti-v8-2009-2022-direct-fit-5-6l-5-0l-oe-23300-1ca0a-2-year-warranty","title":"Boatrip Starter Motor for Nissan \u0026 Infiniti V8 2009-2022 — Direct Fit 5.6L\/5.0L, OE# 23300-1CA0A, 2-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 19068 is a direct-replacement starter motor engineered to fit 2009–2022 Nissan and Infiniti V8 models, matching OE performance for reliable engine starts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis starter motor is built to replace OE# 23300-1CA0A \/ 410-48313 and is compatible with Nissan Titan, Armada, Pathfinder, NV2500\/NV3500 and Infiniti QX56, QX80, QX70, Q70, Q70L, FX50, and M56 applications with 5.6L or 5.0L V8 engines. Manufactured by Boatrip in a facility certified to IATF 16949 standards, the unit uses new premium components intended to meet or exceed OEM specifications and comes with a two-year warranty. The design prioritizes accurate fit, simplified installation and long-term durability.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this starter ensure a proper fit in my Nissan or Infiniti?\u003c\/h3\u003e\n\u003cp\u003eThe Boatrip 19068 follows standardized production tolerances to align with factory mounting points and electrical connections. Its dimensions and terminal placements are engineered for a bolt-in replacement so you can avoid modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect match to OE mounting bolt pattern and shaft length\u003c\/li\u003e\n  \u003cli\u003eCompatible electrical terminals for stock harnesses\u003c\/li\u003e\n  \u003cli\u003eDesigned for 5.6L and 5.0L V8 engine blocks listed in fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and quality standards does this starter meet?\u003c\/h3\u003e\n\u003cp\u003eThis unit is produced using new, premium parts in a quality-controlled environment that follows IATF 16949 requirements. Components are selected to deliver dependable engagement, consistent cranking and resistance to common wear factors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to meet or exceed OEM specifications\u003c\/li\u003e\n  \u003cli\u003eFactory follows documented quality management processes\u003c\/li\u003e\n  \u003cli\u003ePremium internal components for longer service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect during replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward for experienced DIYers or technicians because the starter is a drop-in replacement. Typical steps include disconnecting the battery, removing the old starter, transferring any brackets if required, and torquing the new unit to factory specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-in design reduces the need for adaptations\u003c\/li\u003e\n  \u003cli\u003eStandard tools and torque values apply for most models\u003c\/li\u003e\n  \u003cli\u003eInspect wiring and ground points for corrosion before fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with this replacement starter?\u003c\/h3\u003e\n\u003cp\u003eBoatrip backs the 19068 starter with a two-year warranty to cover manufacturing defects under normal use. For best results, confirm vehicle compatibility using OE# 23300-1CA0A or part reference before installation and retain purchase documentation for warranty claims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-year limited warranty from the manufacturer\u003c\/li\u003e\n  \u003cli\u003eCheck OE and vehicle fitment details prior to purchase\u003c\/li\u003e\n  \u003cli\u003eCustomer support available through the Boatrip store channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This starter motor is suited for owners and mechanics working on 2009–2022 Nissan and Infiniti V8 vehicles who need a reliable, OEM-compatible replacement. It’s a good choice when you want a cost-effective, warranty-backed unit made with new premium components and produced in a facility certified to modern automotive quality standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Nissan and Infiniti models does this starter fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits 2009–2022 Nissan Titan, Armada, Pathfinder, NV2500\/NV3500 and Infiniti QX56, QX80, QX70, Q70, Q70L, FX50, M56 with 5.6L or 5.0L V8 engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers the Boatrip 19068 starter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The starter includes a two-year manufacturer warranty covering defects under normal use; keep purchase details for claims.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584939098297,"sku":"B0CLV3T9ZP","price":200.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_d9c389ed-baab-4522-a512-3440c7b60693.jpg?v=1790459959"},{"product_id":"boatrip-starter-replacement-for-gm-3-0l-3-6l-v6-oe-12645298-direct-fit-new-components-2-year-warranty","title":"Boatrip Starter Replacement for GM 3.0L\/3.6L V6 OE#12645298 — Direct Fit, New Components, 2-Year Warranty","description":"\u003cstrong\u003eBoatrip 17986 is a direct-fit replacement starter built to restore reliable cranking for GM 3.0L and 3.6L V6 vehicles that use OE# 12645298.\u003c\/strong\u003e\n\n\u003cp\u003eThis high-quality aftermarket starter is engineered to match OEM fit and performance for a long list of GM models including the GMC Acadia (2007–2016), Buick Enclave\/Lacrosse (2008–2017), Chevy Traverse\/Malibu\/Impala, Cadillac SRX\/STS\/XTS and compatible Pontiac, Saturn and Suzuki platforms equipped with 3.0L or 3.6L V6 engines. Manufactured by Boatrip in a certified facility, the unit uses new premium components and standardized machining to ensure accurate dimensions and simplified installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this starter match the original equipment (OE) it replaces?\u003c\/h3\u003e\n\u003cp\u003eThe Boatrip 17986 is produced to meet or exceed the OEM specifications for dimensions, mounting points, and electrical connections tied to OE# 12645298. Critical components are new rather than remanufactured, reducing the risk of premature failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to the same mounting bolt pattern and shaft length as the OE unit\u003c\/li\u003e\n  \u003cli\u003eCompatible electrical connector and solenoid orientation for plug-and-play fit\u003c\/li\u003e\n  \u003cli\u003eNew internal components (brushes, bearings, drive) for consistent torque\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and engines will this starter fit?\u003c\/h3\u003e\n\u003cp\u003eThis starter fits many GM mid-size SUVs and sedans with 3.0L or 3.6L V6 engines that reference OE part number 12645298. Always confirm fitment with your VIN or part cross-reference before purchase to avoid returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: GMC Acadia 07–16, Buick Enclave\/Lacrosse 08–17, Chevy Traverse, Malibu, Impala\u003c\/li\u003e\n  \u003cli\u003eCovers Cadillac SRX, STS, XTS and several Pontiac, Saturn, Suzuki models with V6 engines\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle’s engine size (3.0L or 3.6L) and OEM part number for compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and warranty details?\u003c\/h3\u003e\n\u003cp\u003eBoatrip manufactures this starter in a factory certified to IATF 16949 standards, with quality controls and processes derived from long-term supplier programs. The unit ships with a two-year warranty against manufacturing defects for added confidence.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured using premium new components for durability\u003c\/li\u003e\n  \u003cli\u003eQuality system certified facility and Ford-style VRT quality controls\u003c\/li\u003e\n  \u003cli\u003eIncludes a 2-year limited warranty; verify terms before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone with basic mechanical skills and common hand tools; the starter is designed for a direct bolt-in replacement. Always disconnect the battery before starting, and verify clearance\/access in your engine bay before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard bolt pattern and plug-in solenoid connector for straightforward swap\u003c\/li\u003e\n  \u003cli\u003eMay require lifting or removing minor components for engine-bay access on some models\u003c\/li\u003e\n  \u003cli\u003eTorque mounting bolts to manufacturer specs and reconnect battery last\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: drivers and indie mechanics who need a reliable, affordable replacement starter for GM 3.0L and 3.6L V6 vehicles that reference OE# 12645298. It’s suited to those who want new-component construction, OE-style fitment, and a two-year warranty without paying dealer prices. Verify fit with your VIN, engine size, or the original part number before purchase to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this starter brand new or remanufactured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This Boatrip 17986 starter is built with new premium components, not remanufactured parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it include a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the starter includes a two-year limited warranty against manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584943358137,"sku":"B0CKMDBBG6","price":177.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front.jpg?v=1790460247"},{"product_id":"boatrip-starter-motor-replacement-for-kawasaki-fx-series-john-deere-mowers-model-19169-direct-fit-with-2-year-warranty","title":"Boatrip Starter Motor Replacement for Kawasaki FX Series \u0026 John Deere Mowers — Model 19169, Direct-Fit with 2-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 19169 is a direct-replacement starter motor engineered to fit selected Kawasaki FX series and compatible John Deere mower engines, offering reliable cranking and OEM-equivalent performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for riding mowers and compact engines that use the Kawasaki FX730V, FX691V, FX600V, FX651V, FX541V and FX481V families — and for John Deere models such as 636M, 652R, 648R, Z445, Z920A, WHP52A and WH48A — this Boatrip starter motor replaces several OE numbers (21163-7023, 21163-0756, 21163-0754, 428000-6600). The unit is manufactured using new components, assembled to industry quality standards, and supplied with a two-year warranty for added peace of mind. Before ordering, verify compatibility with your engine serials and mounting pattern to ensure a correct fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this starter motor match my original equipment?\u003c\/h3\u003e\n\u003cp\u003eThe Boatrip 19169 is designed to mirror the mechanical dimensions and electrical connections of the original starters specified by the OE numbers listed. Critical mounting points, pinion alignment and solenoid terminals are positioned to align with the factory locations, minimizing installation adjustments. Materials and winding specifications are selected to provide comparable torque and durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit bolt pattern matched to Kawasaki\/John Deere mounting flanges\u003c\/li\u003e\n  \u003cli\u003eCompatible solenoid and electrical terminals for plug-and-play hookup\u003c\/li\u003e\n  \u003cli\u003eNew copper windings and bearings for consistent starting torque\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits will I notice after installing it?\u003c\/h3\u003e\n\u003cp\u003eAfter replacement you should experience dependable starting cycles, reduced starter noise and consistent engagement with the engine flywheel. Because the unit is assembled from new parts rather than remanufactured components, its initial performance will feel like a fresh factory part. The two-year warranty covers defects that affect function under normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved cranking reliability compared to worn original starters\u003c\/li\u003e\n  \u003cli\u003eSmoother engagement and quieter operation during startup\u003c\/li\u003e\n  \u003cli\u003eWarranty-backed replacement for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is the installation, and what will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic small-engine maintenance. Typical steps include disconnecting the battery, unbolting the old starter, transferring any required brackets, and securing the replacement before reconnecting electrical leads. Always confirm the starter’s orientation and torque specifications to avoid alignment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand tools: ratchet, sockets, wrenches, and a torque wrench\u003c\/li\u003e\n  \u003cli\u003eBattery disconnect to prevent shorts; optional service manual for torque values\u003c\/li\u003e\n  \u003cli\u003eAllow 30–90 minutes depending on mower layout and access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality controls and support back this product?\u003c\/h3\u003e\n\u003cp\u003eBoatrip’s manufacturing follows automotive-grade quality procedures developed over decades, with factory certifications covering process control and traceability. Each starter is assembled from new premium components and inspected to meet dimensional and electrical standards. Customer support and warranty service are available through the seller for replacements or troubleshooting guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduced in a certified facility with automotive-quality management systems\u003c\/li\u003e\n  \u003cli\u003eInspected for fit, continuity and build integrity before shipping\u003c\/li\u003e\n  \u003cli\u003eTwo-year warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Owners and technicians who maintain Kawasaki-powered residential and light-commercial mowers — or John Deere machines that share the listed engine families — will find this Boatrip starter a cost-effective replacement to restore reliable starting. It’s aimed at users who prefer new-component replacements over remanufactured units, want a close OEM match, and value warranty-backed support. Always cross-check the OE numbers and machine fitment before purchase to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this starter fit my Kawasaki FX731V engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your engine model and OE number; this unit fits FX730V, FX691V, FX600V, FX651V, FX541V, FX481V but not FX731V unless OE numbers match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the starter come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, Boatrip provides a two-year warranty covering manufacturing defects under normal use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584947454137,"sku":"B09TWPGB71","price":186.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_d2e4404b-ca23-471e-aa46-34dd1ba8300c.jpg?v=1790460506"},{"product_id":"boatrip-starter-motor-replacement-for-honda-accord-cr-v-civic-2013-2019-2-4l-2-0l-oe-fit-all-new","title":"Boatrip Starter Motor Replacement for Honda Accord, CR-V \u0026 Civic 2013–2019 — 2.4L\/2.0L OE Fit, All-New","description":"\u003cstrong\u003eBoatrip 10914 is a direct-replacement starter motor engineered to fit select 2013–2019 Honda 2.0L and 2.4L models, built with all-new components to meet OEM fit and function.\u003c\/strong\u003e\n\nThe Boatrip 10914 starter motor replaces OE# 31200-5A2-A51 (also listed as SM74009 \/ SM74027) and is designed for specific Honda Accord (2013–2017 2.4L EX\/LX\/Sport), CR-V (2015–2016 2.4L), and Civic (2016–2019 2.0L) applications. Manufactured by a supplier with over two decades of starter-specific experience and IAFT 16949-certified processes, this unit uses 100% new internal parts and is production-standardized for precise fitment and straightforward installation.\n\n\u003ch3\u003eWill this starter motor fit my Honda model?\u003c\/h3\u003e\n\u003cp\u003eCheck compatibility against your vehicle year, engine size and OEM part number before ordering; Boatrip 10914 targets 2.4L Accords (2013–2017), 2015–2016 CR-V 2.4L, and 2.0L Civics (2016–2019). Confirm your current starter’s OE number (31200-5A2-A51 or equivalent SM74009\/SM74027) to ensure match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: 2013–2017 Honda Accord 2.4L (EX, LX, Sport)\u003c\/li\u003e\n  \u003cli\u003eFits: 2015–2016 Honda CR-V 2.4L\u003c\/li\u003e\n  \u003cli\u003eFits: 2016–2019 Honda Civic 2.0L L4\u003c\/li\u003e\n  \u003cli\u003eCross-check OEM: 31200-5A2-A51 \/ SM74009 \/ SM74027\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and fitment compare to an OEM starter?\u003c\/h3\u003e\n\u003cp\u003eBoatrip’s starter is produced to standardized dimensions so mounting points and electrical connections align with factory locations, reducing install time. Many installations are bolt-on replacements using existing wiring and hardware, though torque specs and safety precautions should follow the vehicle manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandardized production for accurate bolt-hole alignment\u003c\/li\u003e\n  \u003cli\u003eAll-new internal components—no re-manufactured cores\u003c\/li\u003e\n  \u003cli\u003eCompatible electrical terminals match factory wiring harnesses\u003c\/li\u003e\n  \u003cli\u003eInstallation generally requires basic hand tools and vehicle-specific torque values\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality assurance and warranty does Boatrip provide?\u003c\/h3\u003e\n\u003cp\u003eThe starter is manufactured under an IAFT 16949 quality system with additional VRT-style controls to monitor production consistency. Boatrip offers a 2-year warranty covering manufacturing defects—keep purchase records and verify part fitment on arrival.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory certified to IAFT 16949 standards\u003c\/li\u003e\n  \u003cli\u003eVRT-quality management processes implemented\u003c\/li\u003e\n  \u003cli\u003e2-year limited warranty from Boatrip on defects\u003c\/li\u003e\n  \u003cli\u003e100% new components—no used cores\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I inspect when the starter arrives?\u003c\/h3\u003e\n\u003cp\u003eOn receipt, visually confirm the part number label and check mounting flange and terminals for damage. Verify the pinion gear, solenoid connection, and overall housing are intact and match the removed unit before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm OE number label (31200-5A2-A51 \/ SM74009 \/ SM74027)\u003c\/li\u003e\n  \u003cli\u003eInspect pinion gear and teeth for defects\u003c\/li\u003e\n  \u003cli\u003eCheck solenoid terminal and housing for shipping damage\u003c\/li\u003e\n  \u003cli\u003eCompare dimensions and mounting holes with old starter\u003c\/li\u003e\n\u003c\/ul\u003e\n\nThis starter is intended for vehicle owners, independent mechanics and garages who need a reliable, cost-effective replacement for the original starter on compatible Honda models. If you maintain or repair late-model Accords, CR-Vs or Civics with the specified 2.0L\/2.4L engines, want factory-like fitment, and prefer an all-new component backed by a two-year warranty, Boatrip 10914 is a practical replacement option. Always verify vehicle compatibility and OE numbers before purchase to ensure proper fitment and safe installation.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit a 2015 Honda Accord 2.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—Boatrip 10914 fits 2013–2017 Honda Accord 2.4L models; verify your OE number (31200-5A2-A51) to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Boatrip starter new or remanufactured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This unit is manufactured with 100% new components, not a remanufactured core.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584950763705,"sku":"B0B8CXPRC5","price":194.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_0ba9c82e-6f22-4d08-afa8-0a4499ba200a.jpg?v=1790460704"},{"product_id":"boatrip-starter-motor-replacement-for-honda-civic-hr-v-acura-ilx-direct-fit-1-8l-2-0l-new-internal-parts","title":"Boatrip Starter Motor Replacement for Honda Civic\/HR-V \u0026 Acura ILX — Direct-Fit 1.8L\/2.0L, New Internal Parts","description":"\u003cp\u003e\u003cstrong\u003eBoatrip's direct-fit starter motor replaces the factory unit for select Honda Civic, HR-V and Acura ILX models to restore reliable engine cranking and fit without modification.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Civic (1.8L 2012–2015), HR-V (1.8L 2016–2022) or Acura ILX (2.0L 2013–2015) is showing slow starts, intermittent engagement, or failure to crank, this Boatrip starter motor is built as a straightforward replacement that matches the original equipment specifications (OE# 31200-R1A-A01 \/ 31200-R0A-004 \/ 31200-RIA-A11). Designed and manufactured by a team with over two decades in starter production and backed by ISO\/IATF-certified quality systems, the unit uses new internal parts—not rebuilt components—for consistent performance and long service life.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this starter motor match my vehicle’s original part?\u003c\/h3\u003e\n\u003cp\u003eThis replacement is produced to align with factory dimensions, mounting points, and electrical connectors so it installs like the original component. Boatrip engineers verify fitment across the listed models to minimize adjustment or additional parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-on design for the specified Honda and Acura engines\u003c\/li\u003e\n  \u003cli\u003eElectrical terminals sized to OEM standards for plug-and-play hookup\u003c\/li\u003e\n  \u003cli\u003ePhysical dimensions and shaft engagement matched to factory geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality controls and materials are used in this unit?\u003c\/h3\u003e\n\u003cp\u003eThe starter is manufactured using all-new components and follows a quality system accredited to industry standards to reduce the risk of early failure. Production includes process controls carried out by a long-established starter specialist.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% new internal parts—no reconditioned cores\u003c\/li\u003e\n  \u003cli\u003eFactory follows certified quality management practices (IATF 16949)\u003c\/li\u003e\n  \u003cli\u003eFinal inspections ensure electrical and mechanical function before shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what do I need to know before buying?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward for anyone familiar with basic automotive repair: unbolt the old starter, disconnect electrical connections, and mount the replacement. Always confirm the OE numbers and vehicle year\/engine match to avoid fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple bolt-on replacement with original mounting pattern\u003c\/li\u003e\n  \u003cli\u003eCheck compatibility using OE numbers 31200-R1A-A01, 31200-R0A-004, 31200-RIA-A11\u003c\/li\u003e\n  \u003cli\u003eDisconnect the battery before starting work and verify clearances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with this starter?\u003c\/h3\u003e\n\u003cp\u003eBoatrip stands behind the unit with a multi-year warranty to give buyers confidence in durability, plus access to model-specific guidance if installation questions arise. Keep proof of purchase for warranty claims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-year limited warranty included\u003c\/li\u003e\n  \u003cli\u003eManufacturer support from a company specialized in starters and related parts\u003c\/li\u003e\n  \u003cli\u003eFitment assistance available—confirm vehicle model and engine before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement starter is intended for owners, mechanics, and repair shops working on Honda Civic 1.8L (2012–2015), Honda HR-V 1.8L (2016–2022) and Acura ILX 2.0L (2013–2015) engines who want a brand-new, factory-compatible unit. It suits buyers who prefer new-component reliability over remanufactured units, need a direct-fit solution that keeps original mounting and electrical connections, and want a product backed by established production standards and a two-year warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this starter compatible with my 2014 Honda Civic 1.8L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this Boatrip starter lists fitment for Honda Civic 1.8L model years 2012–2015. Match the OE numbers to confirm exact compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the starter come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, Boatrip provides a two-year warranty. Keep your proof of purchase for any claims or support.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584950829241,"sku":"B0B24XJDSG","price":183.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_7f44d2b9-33b7-4fb0-811a-a31bb7628473.jpg?v=1790460705"},{"product_id":"boatrip-starter-motor-replacement-for-2003-2006-honda-accord-element-2004-2005-acura-tsx-2-4l-oe-fit-all-new-components-2-ye","title":"Boatrip Starter Motor Replacement for 2003-2006 Honda Accord\/Element \u0026 2004-2005 Acura TSX — 2.4L OE Fit, All-New Components, 2-Ye","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 17870 is a direct-fit replacement starter motor engineered to restore reliable engine cranking for 2003–2006 Honda Accord, Honda Element, and 2004–2005 Acura TSX models with the specified L4 engines (OE# 31200-RAA-A51\/A52).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis high-quality replacement starter from Boatrip is built using all-new components and follows factory-style specifications so it installs cleanly and performs like the original. Backed by decades of starter manufacturing experience and an extended 2-year warranty, this unit provides a practical repair option for owners and professional technicians working on compatible Honda and Acura vehicles. The following details describe what the part fits, how it performs, and why it’s a dependable swap for worn or failed starters.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engine codes does this starter motor fit?\u003c\/h3\u003e\n\u003cp\u003eThis model is designed to match the OE fitment and bolt pattern for several Honda and Acura L4 applications. Confirm compatibility with your vehicle’s year, engine, and OEM number before purchase to ensure a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2003–2005 Honda Accord 2.4L (LX, EX, DX trims)\u003c\/li\u003e\n  \u003cli\u003e2003–2006 Honda Element with 2.4L engine\u003c\/li\u003e\n  \u003cli\u003e2004–2005 Acura TSX 2.4L L4\u003c\/li\u003e\n  \u003cli\u003eOEM cross-reference numbers: 31200-RAA-A51, 31200-RAA-A52; manufacturer codes SMU0311, 41054101R, SM61209\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement compare to the original equipment starter?\u003c\/h3\u003e\n\u003cp\u003eBoatrip manufactures this starter to meet or exceed OEM specifications using 100% new components and ISO\/IAFT-aligned quality processes. Expect matching gear engagement, electrical connections, and mounting dimensions so installation follows the same steps as the factory unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAll-new internal parts—no remanufactured cores\u003c\/li\u003e\n  \u003cli\u003ePrecision machining for correct gear mesh and shaft alignment\u003c\/li\u003e\n  \u003cli\u003eCompatible electrical terminals and solenoid function for plug-and-play replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the benefits for installers and DIY mechanics?\u003c\/h3\u003e\n\u003cp\u003eThe unit’s standardized production and precise sizing simplify installation and reduce bench-fit adjustments. Technicians will appreciate reduced diagnosis time when the starter matches OEM fitment and mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-in fitment cuts installation time\u003c\/li\u003e\n  \u003cli\u003eClear OEM cross-references for verifying compatibility\u003c\/li\u003e\n  \u003cli\u003eSupplied to meet quality systems (IAFT 16949)—consistent manufacturing tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances come with this starter?\u003c\/h3\u003e\n\u003cp\u003eBoatrip emphasizes manufacturing controls and long-term coverage to give buyers confidence in durability and performance. Warranty terms are provided to protect against defects in material and workmanship under normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-year limited warranty from Boatrip\u003c\/li\u003e\n  \u003cli\u003eManufactured under IAFT 16949-aligned quality processes\u003c\/li\u003e\n  \u003cli\u003eFactory testing for electrical and mechanical function before shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement starter is targeted at owners of compatible 2003–2006 Honda Accords, 2003–2006 Honda Elements, and 2004–2005 Acura TSX vehicles who need a reliable, OEM-style starter replacement. It’s also suitable for independent repair shops and fleet managers seeking a cost-effective, new-component alternative to remanufactured starters. Always verify the OE reference numbers and vehicle specifications before ordering to ensure proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this starter a new unit or remanufactured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This Boatrip starter is manufactured with 100% new components, not remanufactured.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter include a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Boatrip provides a 2-year limited warranty covering defects under normal use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584950927545,"sku":"B0B8CNHR96","price":179.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-front-view.jpg?v=1790460704"},{"product_id":"boatrip-starter-motor-replacement-for-honda-acura-l4-fits-accord-2-4-06-12-all-new-components-bolt-on-fit","title":"Boatrip Starter Motor Replacement for Honda \u0026 Acura L4 — Fits Accord 2.4 (06–12) | All‑New Components, Bolt‑On Fit","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 17960 is a direct-replacement starter motor built to match OEM fit and performance for select Honda and Acura L4 engines (OE#: 31200-RAA-A61 \/ 31200-RRA-A51 \/ 31200-RZA-A01).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premium replacement starter is designed for late‑2000s Honda and Acura models, including Accord 2.4 (2006–2012), CR‑V and Element (2007–2011), Civic 2.0 (2006–2011), Acura TSX 2.4 (2006–2014) and CSX (2006–2008). Manufactured with all‑new components in a certified facility, the unit aims to deliver reliable cranking, a precise fit, and a straightforward install so you can get back on the road with minimal downtime.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter motor fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eConfirming fitment requires checking your vehicle year, engine size, and the OE part number. The Boatrip 17960 replaces OE numbers 31200‑RAA‑A61, 31200‑RRA‑A51, and 31200‑RZA‑A01 and is intended for the specific models listed above.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Honda Accord 2.4 (06–12), CR‑V (07–11), Element (07–11), Civic 2.0 (06–11)\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Acura TSX 2.4 (06–14) and CSX (06–08)\u003c\/li\u003e\n  \u003cli\u003eCheck your engine code and OE number before purchase\u003c\/li\u003e\n  \u003cli\u003ePhysical mounting points mirror OEM dimensions for bolt‑on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and durable is the Boatrip starter?\u003c\/h3\u003e\n\u003cp\u003eThis starter is assembled with 100% new premium components and produced in a factory certified to IATF 16949 standards, reflecting automotive industry quality processes. The design emphasizes long life through accurate machining and validated assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% new internal parts—no rebuilt cores\u003c\/li\u003e\n  \u003cli\u003eProduced under IATF 16949 quality management systems\u003c\/li\u003e\n  \u003cli\u003eStandardized production tolerances for consistent performance\u003c\/li\u003e\n  \u003cli\u003eBacked by a 2‑year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with starter replacement: remove battery negative, unbolt wiring and mounting fasteners, swap the unit, and reconnect. The Boatrip 17960 is made to match OEM size and mounting locations to reduce compatibility issues and installation time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt‑on replacement—no modification required\u003c\/li\u003e\n  \u003cli\u003eStandard electrical terminals match factory harnesses\u003c\/li\u003e\n  \u003cli\u003eIncludes precision machining for correct alignment with flywheel\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: basic hand tools, torque wrench, and safety gear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat distinguishes this starter from cheaper alternatives?\u003c\/h3\u003e\n\u003cp\u003eUnlike refurbished or economy units, this Boatrip starter uses all new parts and follows certified manufacturing controls to meet or exceed OEM specifications. That quality control reduces early failures and uneven performance associated with lesser rebuilds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAll‑new components prevent wear carryover from previous cores\u003c\/li\u003e\n  \u003cli\u003eFactory quality systems (IATF 16949) ensure consistent assembly\u003c\/li\u003e\n  \u003cli\u003ePrecision fit lowers installation headaches and vibration\u003c\/li\u003e\n  \u003cli\u003eWarranty provides additional buyer protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Boatrip 17960 starter is aimed at DIY mechanics, independent repair shops, and fleet owners who need a reliable, OEM‑fit replacement for affected Honda and Acura four‑cylinder models. If you want a new, factory‑manufactured unit with documented quality controls and a two‑year warranty, this starter is a practical choice. Always verify the OE number and model year before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter replace OEM number 31200‑RAA‑A61?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Boatrip 17960 replaces OE 31200‑RAA‑A61, plus 31200‑RRA‑A51 and 31200‑RZA‑A01 for listed models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the starter new or remanufactured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This unit is manufactured with 100% new components, not a rebuilt core.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584950894777,"sku":"B09YD83BRH","price":176.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_b3d3d49a-d9c8-46fa-97c9-447720224299.jpg?v=1790460704"},{"product_id":"boatrip-starter-motor-for-toyota-corolla-matrix-pontiac-vibe-1-8l-2009-2016-direct-fit-oem-quality","title":"Boatrip Starter Motor for Toyota Corolla\/Matrix \u0026 Pontiac Vibe 1.8L (2009–2016) — Direct-Fit, OEM-Quality","description":"\u003cp\u003e\u003cstrong\u003eThe Boatrip 19049 starter motor is a direct-fit replacement starter engineered to power 1.8L L4 engines in Toyota Corolla, Matrix and Pontiac Vibe models from the 2009–2016 model years.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement unit is built to match the original equipment form, fit and function for vehicles that use OE numbers 28100-0T050, 28100-37050, and 428000-4300. Designed and manufactured by a company with more than two decades in starter production, the Boatrip 19049 combines new premium components with standardized assembly so you receive a part intended for straightforward installation and reliable operation. The product is backed by factory ISO\/TS and IATF-quality systems and includes a two-year warranty for added confidence.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter motor fit my Toyota Corolla, Matrix, or Pontiac Vibe?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on engine size and model year. The Boatrip 19049 is specifically produced for 1.8L four-cylinder engines in Toyota Corolla (2009–2016), Toyota Matrix (2009–2014) and Pontiac Vibe (2009–2010) that match the listed OE reference numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck your vehicle's model year and engine displacement: 1.8L L4 required.\u003c\/li\u003e\n  \u003cli\u003eConfirm one of these OE numbers: 28100-0T050, 28100-37050, 428000-4300.\u003c\/li\u003e\n  \u003cli\u003eCompare mounting flange, electrical connector, and pinion orientation with your existing starter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Boatrip starter compare to an OEM unit?\u003c\/h3\u003e\n\u003cp\u003eThis starter is manufactured to meet or exceed OEM specifications using new premium parts and standardized production methods. The factory follows certified quality management systems to keep tolerances and materials consistent with original design intent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew internal components rather than rebuilt parts for consistent performance.\u003c\/li\u003e\n  \u003cli\u003eStandardized dimensions to support a precise, bolt-in fit.\u003c\/li\u003e\n  \u003cli\u003eQuality control processes aligned with IAFT 16949:2016 and VRT practices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and initial use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward for technicians or experienced DIYers familiar with starter replacement. Because the unit conforms to OEM mounting and electrical connections, you can generally reuse existing wiring and fasteners if they are in good condition.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify battery voltage and clean terminals before installing the new starter.\u003c\/li\u003e\n  \u003cli\u003eTorque bolts to manufacturer specs and ensure correct connector seating.\u003c\/li\u003e\n  \u003cli\u003ePerform an initial test crank to confirm engagement and smooth starting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances come with this starter?\u003c\/h3\u003e\n\u003cp\u003eThe Boatrip 19049 is produced in a factory with long-term experience in starter manufacturing and documented quality certifications. The item ships with a two-year warranty to cover manufacturing defects under normal use; check seller terms for exact coverage details.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory quality systems include ISO\/TS and IATF certifications.\u003c\/li\u003e\n  \u003cli\u003eTwo-year limited warranty from the manufacturer.\u003c\/li\u003e\n  \u003cli\u003eReplacement or support subject to warranty terms and proof of fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this part for: The Boatrip 19049 starter is aimed at vehicle owners, professional mechanics, and independent repair shops seeking a new, OE-referenced starter for 1.8L Toyota Corolla, Matrix, or Pontiac Vibe engines from the listed years. Choose this unit if you want a direct-fit replacement manufactured with new components, backed by factory quality processes and a two-year warranty, and be sure to confirm OE numbers and physical fitment before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit Corolla 2012 1.8L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your 2012 Corolla has a 1.8L L4 engine and matches OE 28100-0T050 or equivalent, this starter is designed to fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Boatrip 19049 refurbished or new?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Boatrip 19049 is manufactured with new premium components rather than being a rebuilt unit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584970588345,"sku":"B0DK35BFSY","price":192.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_92cc4388-f8a3-4d61-b487-052fd005a2e6.jpg?v=1790461441"},{"product_id":"boatrip-coated-starter-motor-saej1171-for-1996-2007-mercruiser-volvo-penta-mercury-4-3-8-1l-v6-v8-rebuilt-internals-corrosion-r","title":"Boatrip Coated Starter Motor SAEJ1171 for 1996–2007 Mercruiser\/Volvo Penta\/Mercury 4.3–8.1L V6\/V8 — Rebuilt Internals, Corrosion-R","description":"\u003cp\u003e\u003cstrong\u003eThe Boatrip SAEJ1171 coated starter motor is a direct-replacement, rebuilt-style starter designed to restore reliable cranking for 1996–2007 4.3L–8.1L Mercruiser, Volvo Penta and Mercury Marine V6\/V8 engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis starter motor is manufactured to meet common OEM fit and function for popular sterndrive and inboard marine gasoline engines from the late 1990s through the 2000s. Built with new internal components and a protective coating on the housing, it targets boat owners and marine mechanics who need a dependable, OEM-number-compatible replacement that arrives ready to install. The unit replaces OE numbers including 50-863007A1, 863007A1, 9000821, 9000762, 3860566 and M59601, and comes with a two-year warranty backed by a factory that follows IATF 16949-aligned quality processes.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and model years will this starter fit?\u003c\/h3\u003e\n\u003cp\u003eThis Boatrip SAEJ1171 starter is engineered for General Motors-based marine engines used in Mercruiser, Volvo Penta, and Mercury Marine setups. It covers most 4.3L V6 and 5.0L–8.1L V8 gasoline sterndrive and inboard applications produced between 1996 and 2007, when matched to the correct OE part numbers and mounting pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits GM-based 4.3L V6 and 5.0L, 5.7L, 7.4L, 8.1L V8 marine engines.\u003c\/li\u003e\n  \u003cli\u003eCompatible with OE numbers: 50-863007A1, 863007A1, 9000821, 9000762, 3860566, M59601.\u003c\/li\u003e\n  \u003cli\u003eDesigned for 1996–2007 Mercruiser, Volvo Penta, Mercury Marine sterndrive\/inboard models.\u003c\/li\u003e\n  \u003cli\u003eConfirm flywheel tooth count, bolt pattern and electrical terminal layout before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the coated housing and rebuilt internals help in marine conditions?\u003c\/h3\u003e\n\u003cp\u003eThe starter’s protective coating and replacement internal parts improve resistance to salt, humidity and vibration compared with many aged OEM starters. While not a corrosion-proof guarantee, the coating slows surface degradation and the new components restore consistent engagement, helping boats start reliably under typical marine usage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExterior coating reduces surface corrosion risk in salty environments.\u003c\/li\u003e\n  \u003cli\u003eNew armature and brushes restore reliable electrical contact and torque delivery.\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined nose and mounting surfaces ensure correct alignment to the flywheel.\u003c\/li\u003e\n  \u003cli\u003eFactory-tested to meet targeted OEM performance specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check for fitment before installing this replacement starter?\u003c\/h3\u003e\n\u003cp\u003eBefore purchasing, compare the replacement’s electrical terminals, bolt pattern and pinion engagement with your original starter. Even with matching OE numbers, small variations in wiring harnesses or accessory brackets can require a quick verification to confirm direct swap compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare OE numbers stamped on your old starter to listed replacement numbers.\u003c\/li\u003e\n  \u003cli\u003eVerify bolt hole spacing and mounting flange orientation against the engine bellhousing.\u003c\/li\u003e\n  \u003cli\u003eCheck terminal type and position for direct electrical connection.\u003c\/li\u003e\n  \u003cli\u003eConfirm pinion clearance and flywheel tooth count for smooth meshing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances does this Boatrip starter include?\u003c\/h3\u003e\n\u003cp\u003eThis starter is produced by a factory with long-term experience in starter manufacturing and an IATF-aligned quality system. Boatrip provides a two-year limited warranty, offering coverage against manufacturing defects when used in normal marine operating conditions and installed per recommended procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured by a factory with over 20 years of starter experience.\u003c\/li\u003e\n  \u003cli\u003eIATF 16949-aligned quality controls and process traceability.\u003c\/li\u003e\n  \u003cli\u003eTwo-year limited warranty from Boatrip on manufacturing defects.\u003c\/li\u003e\n  \u003cli\u003eShips as a ready-to-install unit with standardized dimensional tolerances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Boatrip SAEJ1171 starter is intended for boat owners, marina technicians and professional mechanics who need an affordable, OE-number-compatible replacement for common late-1990s to mid-2000s Mercruiser, Volvo Penta and Mercury Marine GM-based engines. It’s a practical option when your original starter shows slow cranking, intermittent engagement, or visible corrosion and you want a straightforward swap with backed factory assurance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this starter fit my 5.7L Mercruiser from 2001?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your old starter matches one of the listed OE numbers and bolt pattern for 2001 5.7L Mercruiser, this unit should fit. Verify OE number and mounting holes before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the starter come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Boatrip provides a two-year limited warranty covering manufacturing defects under normal use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584977502393,"sku":"B0BGRB5LB3","price":177.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-front-mount-starter.jpg?v=1790461800"},{"product_id":"boatrip-starter-motor-for-5-7l-hemi-dodge-ram-jeep-2009-2022-direct-replacement-new-components","title":"Boatrip Starter Motor for 5.7L HEMI Dodge Ram \u0026 Jeep 2009-2022 — Direct Replacement, New Components","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 17948 is a direct-replacement starter motor engineered to restore reliable cranking for 2009–2022 Dodge Ram and Jeep 5.7L V8 engines that use OE numbers like 56044736AB\/56044736AC.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your truck or SUV shows slow cranking, intermittent starts, or grinding at ignition, this Boatrip replacement starter is built as a full-fit option to match factory specifications. It’s manufactured with new premium components and produced in a certified facility, aiming to provide an accurate fit and long-lasting performance comparable to the original equipment unit.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter fit my 5.7L Dodge Ram or Jeep model?\u003c\/h3\u003e\n\u003cp\u003eThe Boatrip 17948 is designed specifically for 5.7L HEMI V8 applications listed between 2009 and 2022. It cross-references OE numbers such as 56044736AB, 56044736AC, R6044736AC and manufacturer references M0T20972 \/ M0T23271 to help confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits models including Dodge Ram 1500, Ram 2500\/3500\/4000 and Jeep Grand Cherokee and Commander with 5.7 V8.\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement design for the same mounting, electrical connections, and gear engagement.\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle VIN and existing part number to ensure exact match before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is this replacement compared to OEM?\u003c\/h3\u003e\n\u003cp\u003eBoatrip manufactures this starter in a quality-controlled facility holding IATF 16949 (previously ISO\/TS16949) certification and follows automotive quality processes used by major OEMs. It uses new premium components rather than remanufactured cores, aimed at minimizing early failures and delivering consistent starting performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduced under an automotive-grade quality system for consistent manufacturing.\u003c\/li\u003e\n  \u003cli\u003eNew internal parts reduce wear-related issues common with used cores.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 2-year warranty for added owner confidence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and initial use?\u003c\/h3\u003e\n\u003cp\u003eThe unit is built for a straightforward swap into vehicles that match the listed applications: mounting holes, electrical terminals, and pinion alignment are made to match the factory unit. Installation typically involves disconnecting the battery, removing the old starter, transferring any brackets or heat shields if necessary, and bolting in the replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandardized dimensions ensure correct alignment and bolt pattern match.\u003c\/li\u003e\n  \u003cli\u003eNo special programming required—connect the battery and verify cranking.\u003c\/li\u003e\n  \u003cli\u003eIf you hear unusual noises or see starter draw issues, recheck wiring and ground connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality assurances and support come with this part?\u003c\/h3\u003e\n\u003cp\u003eBoatrip follows structured quality management systems and performs production controls aimed at meeting or exceeding OEM expectations. The starter ships with a two-year limited warranty to cover manufacturing defects, plus accessible customer support to address fitment questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured under IATF 16949-aligned processes for automotive components.\u003c\/li\u003e\n  \u003cli\u003e2-year warranty covering defects in workmanship and materials.\u003c\/li\u003e\n  \u003cli\u003eCustomer resources available for model verification and installation guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Boatrip 17948 starter is aimed at vehicle owners, independent mechanics, and fleet technicians who need a cost-effective, new-component replacement for failing or worn original starters on 5.7L HEMI-equipped Dodge Ram and Jeep models. It’s suited for anyone seeking an OE-style fit, new internal parts rather than a remanufactured core, and the reassurance of factory-aligned quality controls and a two-year warranty. Always confirm fitment by comparing your existing starter’s part number or consulting your VIN before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter require programming after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is required; install, reconnect the battery, and test cranking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty comes with the Boatrip 17948 starter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It includes a two-year warranty covering manufacturing defects and workmanship.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584980418745,"sku":"B0CR2YTTS4","price":185.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_b9f4a73d-2143-479f-87fd-a843994e0dda.jpg?v=1790461988"},{"product_id":"boatrip-starter-motor-for-nissan-titan-armada-pathfinder-infiniti-qx56-5-6l-v8-direct-fit-replacement-oem-style-torque","title":"Boatrip Starter Motor for Nissan Titan Armada Pathfinder Infiniti QX56 5.6L V8 — Direct-Fit Replacement, OEM-Style Torque","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 17867 is a direct-replacement starter motor engineered to fit 2004–2011 Nissan Titan, 2004–2009 Armada, 2004–2010 Pathfinder and 2004–2010 Infiniti QX56 5.6L V8 engines to restore reliable cranking and engine starts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis starter motor is built with new premium components and factory-tested to match OEM fit and function for the specified 5.6L V8 applications. Manufactured by Boatrip in a facility certified to IATF 16949 standards, the unit is designed for straightforward installation and backed by a two-year warranty. The part references OE# 233007S000 and M2T85571 so technicians and DIY installers can confirm compatibility before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter mount directly to my Nissan Titan or Armada?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the Boatrip 17867 is produced to the same mounting dimensions as the original equipment for the listed model years. Standardized production keeps hole patterns and flange positions accurate for a bolt-on replacement without modification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit mounting holes and flange alignment matching OEM locations\u003c\/li\u003e\n  \u003cli\u003eDesigned for 5.6L V8 engine bellhousing clearance\u003c\/li\u003e\n  \u003cli\u003eIncludes compatible bendix\/drive gear engagement depth for smooth meshing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the electrical connection and power output compare to the original?\u003c\/h3\u003e\n\n\u003cp\u003eBoatrip uses new electrical components sized to meet or exceed OEM specs so the starter delivers the torque and current needed for reliable cranking. Terminal layout mirrors the factory unit for simple reconnection of battery and solenoid leads.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFactory-style solenoid and heavy-duty terminals for consistent conductivity\u003c\/li\u003e\n  \u003cli\u003eNew internal windings and bearings to maintain rated current draw and torque\u003c\/li\u003e\n  \u003cli\u003eOE reference numbers included to confirm amperage and compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality assurances and warranty come with this replacement starter?\u003c\/h3\u003e\n\n\u003cp\u003eThis starter is manufactured in a quality-controlled facility that achieved ISO\/TS and IATF 16949 certifications, and it follows production systems used by major automakers. Boatrip offers a two-year warranty that covers manufacturing defects, giving buyers a measurable protection period after installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIATF 16949-aligned production and VRT-style quality management practices\u003c\/li\u003e\n  \u003cli\u003eEach unit built with new, premium components (no reman parts)\u003c\/li\u003e\n  \u003cli\u003eTwo-year warranty for peace of mind after purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering to ensure proper fit?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm your vehicle year, make, model and engine size (5.6L V8) and compare the OE numbers listed on your original starter to OE# 233007S000 \/ M2T85571. Also verify starter orientation and electrical terminal style to avoid surprises during installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCross-check original starter OE number with the provided references\u003c\/li\u003e\n  \u003cli\u003eVerify the starter’s electrical terminal type and location against your vehicle\u003c\/li\u003e\n  \u003cli\u003eEnsure bellhousing clearance and starter rotation match your engine requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, repair shops and DIY enthusiasts who need a reliable, new starter motor that bolts in like the factory unit on 2004–2011 Nissan Titan, 2004–2009 Armada, 2004–2010 Pathfinder and 2004–2010 Infiniti QX56 5.6L V8 vehicles. This product is best when you want new internal components, OEM-compatible fit, and a two-year warranty without buying a remanufactured unit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit my 2007 Nissan Titan 5.6L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Boatrip 17867 is compatible with 2004–2011 Nissan Titan 5.6L V8 models. Confirm your existing starter OE number to be certain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this unit new or remanufactured and what's the warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This starter is new (not remanufactured) and comes with a two-year warranty against manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584985727161,"sku":"B0CQK1MV99","price":206.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_1026d560-d3b6-4a5e-9e04-bb5b0d258c31.jpg?v=1790462273"},{"product_id":"boatrip-starter-motor-for-john-deere-gator-4x2-kawasaki-fe250d-fe400d-direct-oem-fit-2-year-warranty","title":"Boatrip Starter Motor for John Deere Gator 4x2 \u0026 Kawasaki FE250D–FE400D — Direct OEM Fit, 2-Year Warranty","description":"\u003cb\u003eBoatrip 18404 is a direct-replacement starter motor engineered to restore reliable starting for John Deere Gator 4x2 models and Kawasaki FE250D–FE400D gas engines.\u003c\/b\u003e\n\n\u003cp\u003eThis aftermarket starter motor is built to match OEM fit and function for specific John Deere Gator utility vehicles and Kawasaki FE series engines. Manufactured by Boatrip in a quality-controlled facility, the unit is made from new premium components, tested to meet industry benchmarks and supplied with a 2-year warranty. It is offered as a plug-and-play solution for owners, fleet managers, and technicians seeking a durable, cost-effective substitute for worn or failed OE starters.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines and part numbers does this replace?\u003c\/h3\u003e\n\u003cp\u003eThis starter is designed for John Deere Gator 4x2 utility vehicles (TS, CX, CS models) and Kawasaki FE-series gas engines, covering a set of common OE references. Confirm compatibility by comparing mounting pattern, electrical connector, and OE number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: John Deere Gator 4x2 TS, CX, CS\u003c\/li\u003e\n  \u003cli\u003eKawasaki engines: FE250D, FE290D, FE350D, FE400D\u003c\/li\u003e\n  \u003cli\u003eOE \u0026amp; cross-reference numbers: 21163-2089, DAW26844, AW26844, SND0132, 41052062\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct bolt-on fit where original starter uses same mounting and shaft alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Boatrip starter ensure reliable performance?\u003c\/h3\u003e\n\u003cp\u003eThe unit is manufactured to meet or exceed OEM specifications using new, quality components in an ISO\/TS and IATF-certified environment. Robust materials and precise production help maintain consistent torque and engagement during engine starts, while factory testing reduces early failure risk.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduced in an IAFT 16949 certified facility for consistent quality control\u003c\/li\u003e\n  \u003cli\u003eEngineered with new premium components, not rebuilt parts\u003c\/li\u003e\n  \u003cli\u003eBench-tested to validate electrical and mechanical performance\u003c\/li\u003e\n  \u003cli\u003e2-year warranty backed by the manufacturer for added assurance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installation?\u003c\/h3\u003e\n\u003cp\u003eConfirm mechanical and electrical compatibility to avoid fitment problems. Verify the starter’s mounting bolt pattern, pinion alignment, and connector type against the original unit; also check battery condition and cabling to ensure proper current delivery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch OE part numbers and mounting holes to your existing starter\u003c\/li\u003e\n  \u003cli\u003eInspect battery voltage and charging system health before replacement\u003c\/li\u003e\n  \u003cli\u003eCompare electrical terminals and solenoid connections for plug-and-play fit\u003c\/li\u003e\n  \u003cli\u003eHave basic tools ready for a straightforward bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the benefits of choosing this aftermarket replacement?\u003c\/h3\u003e\n\u003cp\u003eChoosing this Boatrip replacement can lower cost while restoring dependable starts and maintaining vehicle uptime. The starter is meant to be a direct, durable alternative to OEM units, offering quality assurance and warranty support for peace of mind.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCost-effective alternative to dealer-priced OEM starters\u003c\/li\u003e\n  \u003cli\u003eNew parts used throughout for longer service life than remanufactured units\u003c\/li\u003e\n  \u003cli\u003eStandardized production for consistent fit and fewer returns\u003c\/li\u003e\n  \u003cli\u003eTwo-year warranty reduces ownership risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Boatrip 18404 starter motor is intended for John Deere Gator owners, small-fleet operators, landscapers, farmers, and mechanics needing a reliable replacement for failed starters on 4x2 utility vehicles and compatible Kawasaki FE-series engines. It suits buyers who want OEM-equivalent fit, factory-quality manufacturing standards, and a backed warranty without the higher dealer price. Always verify part numbers and fitment details specific to your vehicle before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this starter fit my John Deere Gator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your mower’s model (Gator 4x2 TS\/CX\/CS) and match OE numbers 21163-2089 or cross-references before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the starter come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, Boatrip provides a 2-year warranty on this starter motor when used per installation guidelines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584987168953,"sku":"B09ZP856KS","price":179.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_a71267a3-88b2-441d-b0df-891eff7ccd1f.jpg?v=1790462349"},{"product_id":"boatrip-starter-motor-for-chevrolet-gmc-4-3l-6-2l-oe-12655055-direct-replacement-2-year-warranty","title":"Boatrip Starter Motor for Chevrolet \u0026 GMC 4.3L–6.2L (OE#12655055) — Direct Replacement, 2-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 10910 is a direct-replacement starter motor engineered to restore reliable engine cranking in compatible 4.3L–6.2L GM V6 and V8 trucks, SUVs and vans.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis high-quality replacement starter is built from all-new components to meet or exceed OEM fit and function for many Chevrolet, GMC and Cadillac models from 2014–2020 and earlier applications with compatible engine sizes. It’s designed to be a like-for-like swap with standard mounting and electrical connections so technicians and experienced DIYers can reinstall quickly. The unit carries factory-style construction, ISO\/TS-certified production standards and a two-year limited warranty for added assurance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines is this starter compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe Boatrip 10910 fits a range of GM full-size trucks, SUVs and vans that use the listed OE reference. It covers common V6 and V8 engines including 4.3L, 5.3L and 6.2L where the OE#12655055 applies. Always cross-check the part number, engine code and model year before purchase to confirm fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include Chevrolet Silverado 1500, Suburban, Tahoe; GMC Sierra 1500, Yukon; Cadillac Escalade; and Express Van 2500\/3500.\u003c\/li\u003e\n  \u003cli\u003eEngines: 4.3L V6, 5.3L V8 and 6.2L V8 applications that reference OE#12655055.\u003c\/li\u003e\n  \u003cli\u003eModel years commonly covered: mid-2010s through 2020 for vehicles with the matching mounting and electrical connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this starter match OEM performance and reliability?\u003c\/h3\u003e\n\u003cp\u003eBoatrip manufactures this starter with 100% new internal parts, engineered to meet or exceed original equipment specifications. Production follows ISO\/TS and IATF quality systems and a vehicle manufacturer’s VRT-style process, which helps ensure consistent assembly and durability under normal operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew premium components avoid wear issues found in rebuilt units.\u003c\/li\u003e\n  \u003cli\u003eISO\/IATF-certified processes reduce manufacturing variability.\u003c\/li\u003e\n  \u003cli\u003eTwo-year limited warranty provides additional coverage after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and fitment?\u003c\/h3\u003e\n\u003cp\u003eThe starter is designed for standardized dimensions and mounting points, allowing straightforward replacement where the OE number and connector style match. Installation typically requires basic hand tools and standard safety precautions; professional installation is recommended if you’re not experienced with vehicle electrical systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement mounting holes and gear alignment for compatible engines.\u003c\/li\u003e\n  \u003cli\u003eStandard starter electrical terminals—verify battery disconnect and torque specs.\u003c\/li\u003e\n  \u003cli\u003eInspect flywheel teeth and starter flange for damage during replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances does Boatrip provide?\u003c\/h3\u003e\n\u003cp\u003eThis product comes with a two-year warranty against manufacturing defects when used in appropriate applications and installed correctly. Boatrip emphasizes traceable quality control from an ISO\/IATF-certified manufacturing environment to reduce defect rates and improve consistency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-year limited warranty from date of purchase.\u003c\/li\u003e\n  \u003cli\u003eManufactured in an ISO\/TS16949 and IATF16949 certified facility.\u003c\/li\u003e\n  \u003cli\u003eFactory-quality checks and VRT-style process controls applied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Boatrip 10910 starter is for owners, mechanics and fleet managers who need a dependable, brand-new replacement for GM 4.3L–6.2L starters where OE#12655055 is specified. It’s ideal for anyone seeking OEM-style fitment and factory-level quality control without choosing a rebuilt core unit. Before ordering, confirm your vehicle’s year, engine displacement and OE part number to ensure exact compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter require a core return?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—Boatrip 10910 is a 100% new replacement and does not need a core exchange.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with a 5.3L Silverado 2016?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes if your vehicle lists OE#12655055; confirm by checking your current starter part number.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67584987201721,"sku":"B0CLV26291","price":192.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_bbe934a6-bf7e-413f-9adf-e4124caa2665.jpg?v=1790462345"},{"product_id":"boatrip-starter-motor-replacement-for-kohler-2509809-12-5-27hp-direct-fit-2-year-warranty","title":"Boatrip Starter Motor Replacement for Kohler 2509809 12.5–27HP — Direct-Fit, 2-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 17628 is a direct-fit replacement starter motor engineered to replace Kohler 2509809\/2509808\/2509821 and compatible with 12.5–27HP Cub Cadet, John Deere, Scotts and Toro small engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFor lawn and garden equipment owners needing a reliable starter that matches OEM dimensions and connection points, this Boatrip unit is built from precision parts, tested to industry quality standards and supplied with a two-year warranty. The design focuses on accurate fit, durable components and straightforward installation so you can get your mower or tractor back in service quickly without sourcing the original Kohler part number.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter fit my engine model?\u003c\/h3\u003e\n\u003cp\u003eCheck mounting pattern, pinion orientation and electrical terminal layout against your original starter. This Boatrip 17628 is made to align with the common Kohler 2509809 family and equivalent OEM part numbers used across multiple 12.5–27HP engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Kohler numbers: 2509809, 2509808, 2509821, 2409801.\u003c\/li\u003e\n  \u003cli\u003eSuits 12.5–27HP small engines used by Cub Cadet, John Deere, Scotts, Toro.\u003c\/li\u003e\n  \u003cli\u003eCompare bolt hole spacing and starter nose length before purchase.\u003c\/li\u003e\n  \u003cli\u003ePictures and measurements provided to verify fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and well-made is this replacement starter?\u003c\/h3\u003e\n\u003cp\u003eBoatrip manufactures this starter using new, premium components and adheres to automotive-quality production standards. The factory follows IAFT\/ISO-quality systems and uses process controls that reduce defects and increase consistency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduced under IAFT 16949-aligned quality practices.\u003c\/li\u003e\n  \u003cli\u003eReinforced drive and bearings for frequent start cycles.\u003c\/li\u003e\n  \u003cli\u003eElectrical terminals and housing finished for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eTwo-year limited warranty included for added confidence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for a mechanically inclined DIYer or technician: remove the old starter, match the mounting, attach electrical connections and torque the bolts to spec. No special service modifications are required when the part matches your engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: ratchet, metric sockets, torque wrench, and wire cleaner.\u003c\/li\u003e\n  \u003cli\u003eBattery disconnected before removal for safety.\u003c\/li\u003e\n  \u003cli\u003eCheck engagement with flywheel after mounting and before final reassembly.\u003c\/li\u003e\n  \u003cli\u003eInstallation guide and fitment checklist available from seller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect for performance and upkeep?\u003c\/h3\u003e\n\u003cp\u003eThe Boatrip starter delivers cranking performance comparable to the original OEM unit when installed correctly and paired with a healthy battery. Routine checks of electrical connections and the engine’s starter circuit help maintain reliable starts season after season.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to meet or exceed OEM torque and engagement characteristics.\u003c\/li\u003e\n  \u003cli\u003eMinimal maintenance: inspect terminals and mounting periodically.\u003c\/li\u003e\n  \u003cli\u003eKeep battery charged and cabling corrosion-free for best results.\u003c\/li\u003e\n  \u003cli\u003eReplacement recommended if pinion gear or solenoid shows wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Owners of small tractors, zero-turn mowers and walk-behind equipment using Kohler-specified starters who need a robust, cost-effective replacement. If you maintain Cub Cadet, John Deere, Scotts or Toro machines with 12.5–27HP engines and want an accurately sized, factory‑manufactured alternative to hard-to-find OEM numbers, the Boatrip 17628 is intended for you. Always confirm part compatibility with your engine’s serial\/model details before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace Kohler part 2509809?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Boatrip 17628 is made to replace Kohler 2509809 and related numbers, but confirm bolt pattern and terminal layout before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty does this starter include?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This starter includes a two-year limited warranty from Boatrip against manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585024819385,"sku":"B09TWQ1FVQ","price":179.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_0aaa5dea-dc7c-4ac9-9f11-2564dca3d834.jpg?v=1790463882"},{"product_id":"boatrip-starter-motor-replacement-17825-direct-fit-for-toyota-lexus-scion-pontiac-vibe-2002-2019-new-premium-parts","title":"Boatrip Starter Motor Replacement 17825 — Direct-Fit for Toyota, Lexus, Scion \u0026 Pontiac Vibe (2002–2019) New Premium Parts","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 17825 is a direct-replacement starter motor engineered to fit a wide range of Toyota, Lexus, Scion and Pontiac Vibe models, providing reliable engine cranking and straightforward installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement starter is built from new premium components and manufactured under automotive-quality processes to meet or exceed original equipment dimensions and performance. It’s designed for compatibility across many model years — including Toyota Camry, Sienna, Highlander, RAV4, Solara, Avalon and several Lexus and Scion vehicles — so you can restore starting function without sourcing an OEM unit. The assembly includes precise mounting points and electrical terminations intended to simplify installation by mechanics and experienced DIYers.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does the Boatrip 17825 starter replace?\u003c\/h3\u003e\n\u003cp\u003eThe 17825 is specified to match fitment on numerous Toyota models from early 2000s through the late 2010s, plus compatible Lexus and Scion vehicles and the Pontiac Vibe. Always verify engine size and production year against the part number and vehicle VIN before ordering to ensure correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eToyota Camry (2002–2017) and Solara (2002–2008)\u003c\/li\u003e\n  \u003cli\u003eToyota Sienna (2004–2016); Highlander (2004–2019); RAV4 (2006–2018)\u003c\/li\u003e\n  \u003cli\u003eToyota Avalon (2005–2018)\u003c\/li\u003e\n  \u003cli\u003eLexus RX330\/RX350, ES330\/ES350, NX200t; Scion xB and tC; Pontiac Vibe\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this starter compare to an OEM unit?\u003c\/h3\u003e\n\u003cp\u003eBoatrip’s starter is manufactured using new, high-quality parts and follows automotive quality standards set by international certifications. While not labeled OEM, it is engineered to match mounting, gear engagement and electrical connections to original tolerances for reliable operation and fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew premium internal components for consistent cranking performance\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet or exceed OEM dimensions and electrical specs\u003c\/li\u003e\n  \u003cli\u003eProduced in an ISO\/IATF-certified facility for quality control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the benefits and key features of this replacement starter?\u003c\/h3\u003e\n\u003cp\u003eThis starter focuses on precise fit, durable components and dependable performance backed by manufacturer quality systems. The design aims to reduce installation time while providing a long service life under normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium-quality materials and new component construction\u003c\/li\u003e\n  \u003cli\u003eStandardized sizing for accurate alignment and easy installation\u003c\/li\u003e\n  \u003cli\u003eFactory quality management: ISO\/TS16949 and updated IATF 16949 processes\u003c\/li\u003e\n  \u003cli\u003eTwo-year warranty for added buyer confidence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing the Boatrip 17825 starter?\u003c\/h3\u003e\n\u003cp\u003eConfirm the starter’s part number against your vehicle’s VIN and engine variant. Inspect battery condition, ground connections and starter wiring; poor electrical supply or corroded terminals can mimic starter failure even after replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify exact model year and engine type compatibility\u003c\/li\u003e\n  \u003cli\u003eTest battery voltage and charging system before installation\u003c\/li\u003e\n  \u003cli\u003eInspect starter mounting points and wiring harness for damage\u003c\/li\u003e\n  \u003cli\u003eFollow recommended torque and wiring procedures during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Boatrip 17825 starter is aimed at owners and mechanics who need a reliable, cost-effective replacement for a failed or failing starter on compatible Toyota, Lexus, Scion and Pontiac Vibe models. It suits DIYers comfortable with vehicle electrical systems, independent shops seeking replacement parts that meet quality standards, and fleet operators who prioritize consistent fit and a manufacturer-backed warranty. If you want a new, precision-sized starter assembled under certified quality systems with a two-year warranty, this unit is a practical alternative to sourcing an OEM part.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Boatrip 17825 starter a brand-new unit or remanufactured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is manufactured with new premium components, not a reman, built to meet or exceed OEM specifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter include a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Boatrip 17825 starter comes with a two-year warranty from the manufacturer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585026949305,"sku":"B09TYWG5W7","price":179.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_af6bb8ba-be23-41ec-a291-e72895549086.jpg?v=1790463988"},{"product_id":"boatrip-starter-motor-replacement-for-ford-f-150-f250-f350-f450-f550-e350-expedition-navigator-2013-2019-direct-fit-new-premium","title":"Boatrip Starter Motor Replacement for Ford F-150 F250 F350 F450 F550 E350 Expedition Navigator 2013-2019 — Direct-Fit, New Premium","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 19247 is a direct-fit replacement starter motor engineered to restore reliable engine starts for specified 2013–2019 Ford F‑Series, E‑Series, Expedition, and Lincoln Navigator V8\/V10 vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your truck or van refuses to crank or shows slow, labored starts, this Boatrip starter motor provides a factory-style swap without custom modifications. Built using modern manufacturing controls and premium components, the unit is intended to match OEM mounting, gear engagement, and electrical connections so installation is straightforward for professional technicians and experienced DIYers.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models and engines does this starter fit?\u003c\/h3\u003e\n\u003cp\u003eThis Boatrip 19247 starter is specified for a range of Ford and Lincoln platforms from model years 2013 through 2019. It covers 5.0L and 6.2L V8s as well as 6.8L and 7.3L V10 applications where the OEM part number and motor flange match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2013–2017 Ford F‑150 with 5.0L and some 6.2L engines\u003c\/li\u003e\n  \u003cli\u003e2013–2019 Ford F‑250, F‑350 with 6.2L engines\u003c\/li\u003e\n  \u003cli\u003e2013–2019 E‑350 vans; 2013–2014 Expedition, E150, E250\u003c\/li\u003e\n  \u003cli\u003eLincoln Navigator and heavy‑duty F‑450\/F‑550\/F‑59\/F‑53 V8\/V10 platforms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Boatrip starter ensure a proper fit and function?\u003c\/h3\u003e\n\u003cp\u003eBoatrip designs each replacement to duplicate key physical dimensions and electrical interfaces, minimizing fitment issues at swap time. The housing, mounting holes, drive gear, and solenoid connection are produced to align with OEM specifications so the starter engages and disengages as expected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandardized production for consistent housing and flange dimensions\u003c\/li\u003e\n  \u003cli\u003eElectrical terminals positioned for direct connection to factory wiring\u003c\/li\u003e\n  \u003cli\u003eNew internal components to restore original cranking performance\u003c\/li\u003e\n  \u003cli\u003eBench-tested units to verify engagement and motor operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and quality assurances for this unit?\u003c\/h3\u003e\n\u003cp\u003eThis starter is assembled with new, premium parts and manufactured under automotive quality systems adopted by major suppliers. The factory’s quality certifications and implementation of Ford‑aligned processes aim to reduce defects and deliver a durable replacement part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured with new premium components, not remanufactured cores\u003c\/li\u003e\n  \u003cli\u003eProduced under IAFT\/TS quality systems and Ford VRT processes\u003c\/li\u003e\n  \u003cli\u003eStandardized inspection and assembly to maintain repeatable quality\u003c\/li\u003e\n  \u003cli\u003e2‑year limited warranty for added buyer protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for technicians and competent do‑it‑yourselfers when the vehicle’s OEM part number and mounting pattern match. Before ordering, confirm your vehicle’s year, engine displacement, and the original starter’s part number or physical bolt pattern to avoid fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm engine size (5.0L, 6.2L, 6.8L\/ V10) and model year compatibility\u003c\/li\u003e\n  \u003cli\u003eCompare mounting flange and electrical terminal locations\u003c\/li\u003e\n  \u003cli\u003eHave basic hand tools and a safe jack\/stands for under‑vehicle access\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs and wiring cleanliness for reliable connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Boatrip 19247 starter is aimed at owners and technicians who need a cost‑effective, new replacement for failed or worn starters on compatible Ford and Lincoln trucks, vans, and SUVs from 2013–2019. It suits fleet maintenance shops, independent mechanics, and hands‑on owners who prefer a new-unit swap over rebuilding. Always verify fitment against your vehicle’s original starter details before purchase to ensure a correct, trouble‑free installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit a 2014 Ford F‑150 5.0L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this Boatrip 19247 starter fits many 2013–2017 F‑150 models with the 5.0L when the mounting pattern and terminals match your OEM unit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the unit new or remanufactured and is there a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The starter is built with new premium components and includes a 2‑year limited warranty for coverage against manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585112899769,"sku":"B09TWQ5K1R","price":179.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-motor-front-view.jpg?v=1790467714"},{"product_id":"boatrip-starter-motor-replacement-for-harley-davidson-2007-2017-road-king-electra-glide-18905bn-direct-oem-fit-new-components","title":"Boatrip Starter Motor Replacement for Harley-Davidson 2007-2017 Road King Electra Glide — 18905BN, Direct OEM Fit, New Components","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 18905BN is a direct-replacement starter motor engineered to fit 2007–2017 Harley-Davidson Road King, Electra Glide, Street Glide, Heritage Softail and CVO models, built to meet OEM form, fit and function.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty replacement starter from Boatrip is designed for riders and mechanics who need a reliable swap for worn or failed original equipment starters. Manufactured with new premium components and produced in a certified facility, the 18905BN matches the electrical and mounting specifications of OE numbers 31618-06A, 428000-3490 and 410-52175. It arrives fully assembled, tested for continuity and balanced for smooth engagement so you can restore dependable starting performance quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWhat motorcycles does this Boatrip starter fit?\u003c\/h3\u003e\n\u003cp\u003eThe 18905BN was engineered to replace original starters on a range of Harley-Davidson Touring and Softail models from roughly 2007 through 2017. Confirm compatibility by checking your bike's model year and OE starter number before ordering. It is intended as a one-to-one replacement for the listed OE references.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Road King, Electra Glide, Ultra, Street Glide, Heritage Softail, Screamin' Eagle and select CVO variants\u003c\/li\u003e\n  \u003cli\u003eOEM cross-references: 31618-06A, 428000-3490, 410-52175\u003c\/li\u003e\n  \u003cli\u003eYears generally covered: 2007–2017 (verify with vehicle fitment)\u003c\/li\u003e\n  \u003cli\u003eDesigned for plug-and-play mounting and electrical connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Boatrip 18905BN compare to an OEM starter?\u003c\/h3\u003e\n\u003cp\u003eBuilt from all-new components and assembled under a certified quality system, the Boatrip starter aims to meet or exceed the original equipment's durability and performance. The internal parts are selected to match OEM electrical characteristics so cranking speed and engagement remain consistent with factory behavior. For many users it offers similar fit and function with the added benefit of a factory-backed warranty.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew premium internal components—no remanufactured parts\u003c\/li\u003e\n  \u003cli\u003eManufactured in an IAFT\/TS-certified facility for consistent quality\u003c\/li\u003e\n  \u003cli\u003eEngineered to match OEM electrical load and mounting dimensions\u003c\/li\u003e\n  \u003cli\u003eIncludes a 2-year limited warranty for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward for anyone comfortable removing and installing a motorcycle starter: disconnect battery, unbolt the old unit, transfer any necessary heat shields or brackets and mount the replacement. Because the part is produced to standardized dimensions, it should seat without modification. Routine checks of battery condition and starter mounting bolts will prolong service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic tools required: socket set, torque wrench, safety gloves\u003c\/li\u003e\n  \u003cli\u003eTypical steps: battery disconnect → remove old starter → install Boatrip starter → reconnect battery\u003c\/li\u003e\n  \u003cli\u003eTorque specs: follow your Harley-Davidson service manual for final bolt torques\u003c\/li\u003e\n  \u003cli\u003eMaintenance tip: inspect connections and clean terminals annually\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances come with this starter?\u003c\/h3\u003e\n\u003cp\u003eBoatrip manufactures this starter under a documented quality system and provides a two-year warranty against defects in materials and workmanship. The production facility follows industry quality standards and implemented vehicle maker promoted systems to control part consistency. Keep purchase records and installation date to make warranty claims straightforward if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuality certifications: ISO\/TS (updated to IATF 16949:2016) driven production practices\u003c\/li\u003e\n  \u003cli\u003eFactory testing: electrical continuity and assembly verification before shipping\u003c\/li\u003e\n  \u003cli\u003eWarranty coverage: 2 years—retain receipt and installation dates\u003c\/li\u003e\n  \u003cli\u003eSupport: contact seller or Boatrip for fitment questions and claims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Boatrip 18905BN starter is aimed at motorcycle owners, independent mechanics and restoration shops seeking a reliable, new-part replacement for failing or aged starters on compatible Harley-Davidson Touring and Softail machines from 2007–2017. If you need an OEM-form, cost-effective swap backed by certification and a two-year warranty, this starter is a practical choice—just verify OE cross-reference and model year fitment before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit my 2010 Street Glide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your 2010 Street Glide uses OE 31618-06A, 428000-3490 or 410-52175, this Boatrip starter is a direct replacement. Verify your bike's OE number before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers the Boatrip starter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Boatrip provides a two-year warranty against manufacturing defects; keep purchase and installation records for claims.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585121222841,"sku":"B0FVWVZVLF","price":248.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_d77ebdc7-d960-4aab-8efa-8a9c9d41e89d.jpg?v=1790467940"},{"product_id":"boatrip-starter-for-kubota-d722-d782-engines-18-21hp-1996-2013-oem-fit-new-components-2-year-warranty","title":"Boatrip Starter for Kubota D722\/D782 Engines 18–21HP (1996–2013) OEM-fit, New Components, 2-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip's 18417 starter is a direct-fit replacement for Kubota D722 and D782 diesel engines (18–21HP, 1996–2013) engineered to meet OEM fit and function.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis high-quality starter assembly (OE references 1G023-63010, 1G023-63011, 67980-31151, and equivalents) is built from new components to deliver reliable cranking for compact tractors, mowers, and equipment using Kubota D722\/D782 series engines. Manufactured by a specialist with decades in starter production, the unit follows rigorous quality systems and is produced to precise dimensions so it installs cleanly without modification.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter fit my Kubota engine and model year?\u003c\/h3\u003e\n\u003cp\u003eYes — the Boatrip 18417 is designed specifically for Kubota D722 and D782 engines used in ZD21 and similar models from 1996 through 2013. Confirm fitment by matching your engine model and any of the listed OEM or aftermarket reference numbers before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Kubota D722 and D782 diesel engines (18HP and 21HP)\u003c\/li\u003e\n  \u003cli\u003eMatches OE numbers: 1G023-63010, 1G023-63011, 67980-31151 and cross-references\u003c\/li\u003e\n  \u003cli\u003eFits equipment like compact tractors and zero-turn mowers using these engines\u003c\/li\u003e\n  \u003cli\u003eDouble-check serial or parts plate to confirm match prior to installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the build quality and manufacturing controlled?\u003c\/h3\u003e\n\u003cp\u003eBoatrip manufactures starters in a facility certified to automotive quality standards, following strict process controls and component selection. The production uses new premium parts and standardized assembly so each unit meets dimension and performance expectations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory follows IATF 16949-aligned quality systems and VRT practices\u003c\/li\u003e\n  \u003cli\u003eNew internal components—no reman cores—ensuring consistent performance\u003c\/li\u003e\n  \u003cli\u003eStandardized machining and assembly for accurate, repeatable fit\u003c\/li\u003e\n  \u003cli\u003eQuality checks performed during and after assembly for reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and warranty support do I get?\u003c\/h3\u003e\n\u003cp\u003eThe starter is built to drop into the stock location with standard mounting and electrical connections, so installation is straightforward for most technicians. Boatrip backs the product with an extended warranty period and recommends verifying fitment before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for straightforward bolt-on installation using OEM mounting points\u003c\/li\u003e\n  \u003cli\u003eElectrical terminals match original starter configuration for easy hookup\u003c\/li\u003e\n  \u003cli\u003eComes with a 2-year warranty against manufacturing defects\u003c\/li\u003e\n  \u003cli\u003eSeller notes: confirm model and part numbers prior to fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Boatrip 18417 starter is aimed at owners, fleet managers, and repair shops that service Kubota-powered compact tractors, mowers, or light equipment from the late 1990s through early 2010s who need an affordable, new-component replacement that adheres closely to OEM specifications. It's also suitable for DIY mechanics comfortable confirming part numbers and performing starter swaps. If you need a remanufactured unit or a model outside the listed engines, verify compatibility with your parts plate or contact a specialist before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit Kubota D722 and D782 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is made for Kubota D722 and D782 engines (18HP and 21HP) used 1996–2013; confirm your OEM number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty does the starter include?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Boatrip provides a 2-year warranty covering manufacturing defects; check seller terms for coverage details.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585438056633,"sku":"B0DNZCRDSG","price":177.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_745f712e-60ec-485a-b28f-aa843eec11be.jpg?v=1790470099"},{"product_id":"boatrip-starter-motor-for-chevrolet-gmc-4-8l-5-3l-v8-2009-2014-direct-fit-new-components","title":"Boatrip Starter Motor for Chevrolet \u0026 GMC 4.8L\/5.3L V8 (2009–2014) — Direct-Fit, New Components","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 6970 is a direct-fit replacement starter motor engineered to restore reliable engine cranking for 4.8L and 5.3L V8 Chevrolet and GMC models from 2009–2014.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Tahoe, Silverado, Suburban, Yukon, Sierra, Savana, Express, or Canyon with a 4.8L or 5.3L V8 won’t crank or shows slow starts, this Boatrip 6970 starter motor is built as an OE-style swap to match factory performance. Manufactured with new premium components and produced under certified quality systems, it’s designed to meet or exceed OEM specifications and fit the same mounting points and electrical connections as the original unit.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter fit my exact vehicle and engine?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on year, engine displacement, and OE part cross-references. The Boatrip 6970 targets 4.8L and 5.3L V8 models from 2009 through 2014 across Chevrolet and GMC full-size trucks and vans, and it aligns with OE numbers like 12611102 and 19168041. Always verify part numbers and physical mounting before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Chevrolet: Tahoe, Silverado, Suburban, Express (select models)\u003c\/li\u003e\n  \u003cli\u003eFits GMC: Yukon XL, Sierra, Savana, Canyon (select models)\u003c\/li\u003e\n  \u003cli\u003eEngine coverage: 4.8L and 5.3L V8 engines (2009–2014)\u003c\/li\u003e\n  \u003cli\u003eOE references: 12611102, 19168041 — confirm with vehicle VIN or current starter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Boatrip 6970 compare to the original starter?\u003c\/h3\u003e\n\u003cp\u003eThis replacement is built to mirror the factory design, using upgraded new components rather than rebuilt parts. That means consistent mounting, correct pinion engagement, and electrical compatibility while adhering to quality controls implemented in ISO\/TS and IATF-certified production facilities.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew premium components — not remanufactured cores\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet or exceed OEM fit and function\u003c\/li\u003e\n  \u003cli\u003eStandardized dimensions for correct alignment and installation\u003c\/li\u003e\n  \u003cli\u003eManufactured under IATF 16949 quality management systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and initial use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable working under the hood: the starter uses the same bolt pattern and electrical terminals as the factory unit. After installation, expect normal cranking speed and dependable engagement; if symptoms persist, double-check battery condition, cables, and grounds before assuming starter failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-on fit for compatible models — minimal modification required\u003c\/li\u003e\n  \u003cli\u003eStandard electrical terminals match factory harness\u003c\/li\u003e\n  \u003cli\u003eTest battery voltage and cable integrity for best results\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if unfamiliar with starters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances come with this starter?\u003c\/h3\u003e\n\u003cp\u003eBoatrip provides a 2-year warranty covering manufacturing defects, backed by production under recognized automotive quality standards. The company’s factory certifications and process controls reduce the risk of early-life failures, and support is available for fitment or warranty questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-year limited warranty on manufacturing defects\u003c\/li\u003e\n  \u003cli\u003eProduced in an IATF 16949-compliant facility\u003c\/li\u003e\n  \u003cli\u003eQuality checks and VRT-style process controls during manufacturing\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Boatrip 6970 starter motor is intended for owners and technicians replacing a failed or tired starter on 2009–2014 Chevrolet and GMC trucks, SUVs, and vans equipped with 4.8L or 5.3L V8 engines. It’s a good choice for those who want a new, OE-style unit with factory-style fit, backed by modern quality controls and a two-year warranty. Before ordering, confirm your vehicle’s year, engine size, and existing starter part number (OE cross-reference) to ensure proper compatibility.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eFeatures:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional manufacturing experience with over 20 years in starter production\u003c\/li\u003e\n  \u003cli\u003eQuality system certified (ISO\/TS16949 → IATF 16949)\u003c\/li\u003e\n  \u003cli\u003eNew premium internal components engineered to meet or exceed OEM specs\u003c\/li\u003e\n  \u003cli\u003eStandardized production ensures accurate size and precise fitment\u003c\/li\u003e\n  \u003cli\u003e2-year warranty — check fitment details before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter replace OE 12611102?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Boatrip 6970 cross-references OE 12611102 and fits compatible 4.8L\/5.3L 2009–2014 models; verify with your VIN or old part number.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this unit new or remanufactured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This is a new starter built with premium components, not a remanufactured or rebuilt core.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585443430585,"sku":"B0F1TL92F2","price":179.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-6970-front-view.jpg?v=1790470260"},{"product_id":"boatrip-starter-motor-for-briggs-stratton-vanguard-32-35hp-v-twin-direct-replacement-2-year-warranty","title":"Boatrip Starter Motor for Briggs \u0026 Stratton Vanguard 32–35HP V‑Twin — Direct Replacement, 2-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 19612 is a direct-fit replacement starter motor engineered to revive 32–35 hp Briggs \u0026amp; Stratton Vanguard V‑Twin air-cooled engines with reliable cranking and OEM-level components.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your lawn tractor, generator, or industrial equipment powered by a Briggs \u0026amp; Stratton Vanguard 32–35 hp V‑Twin engine is slow to start or won’t spin over, this Boatrip replacement starter is built to match the original size, mounting and electrical connections so you can return to work quickly. The unit is manufactured to rigorous automotive production standards and backed by a two-year warranty, making it a practical swap when the factory starter has failed.\u003c\/p\u003e\n\n\u003ch3\u003eWhat engines and part numbers does this starter replace?\u003c\/h3\u003e\n\u003cp\u003eThis starter is designed for 32–35 horsepower Briggs \u0026amp; Stratton Vanguard V‑Twin air-cooled engines and fits multiple factory part numbers. Confirm compatibility by comparing your engine model, mounting pattern, and electrical connections before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with engines listed as 32hp and 35hp Vanguard V‑Twin models.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for part numbers including 845760, 845640, 845761 and related OEM codes.\u003c\/li\u003e\n  \u003cli\u003eAlso cross-references numbers such as 807383, 809054, 428000-0230, 84006533, SND0529 and 410-52156.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Boatrip ensure quality and fit?\u003c\/h3\u003e\n\u003cp\u003eThe starter is produced in a facility certified to automotive quality management standards and assembled from new, premium components to meet or approximate original equipment tolerances. Dimension control and standardized production reduce fitment issues and simplify installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured under IAFT\/TS quality systems for consistent assembly.\u003c\/li\u003e\n  \u003cli\u003eNew internal components rather than remanufactured parts for predictable life.\u003c\/li\u003e\n  \u003cli\u003eStandardized housing and mount points to match OEM starter footprints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and performance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for anyone comfortable with basic engine maintenance: disconnect battery, remove old starter, transfer any brackets or heat shields, and bolt the new unit in place. Once installed, the starter provides firm engagement and dependable cranking similar to the original equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools required: common sockets, ratchet, and torque wrench for proper mounting torque.\u003c\/li\u003e\n  \u003cli\u003eElectrical: swap existing battery and solenoid connections; no special wiring changes expected.\u003c\/li\u003e\n  \u003cli\u003ePerformance: designed to deliver consistent cranking for cold starts and repeated use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the product?\u003c\/h3\u003e\n\u003cp\u003eBoatrip backs this starter with a two-year limited warranty, which covers defects in materials and workmanship under normal use. Keep proof of purchase and confirm fitment details at the time of order to streamline any warranty assistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-year coverage against manufacturing defects.\u003c\/li\u003e\n  \u003cli\u003eFactory support available for fitment and technical questions.\u003c\/li\u003e\n  \u003cli\u003eRecommend verifying engine model and part numbers before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement starter is aimed at owners, fleet managers, and repair technicians who maintain equipment powered by Briggs \u0026amp; Stratton Vanguard 32–35 hp V‑Twin engines—mowers, compact tractors, commercial power equipment, and stationary machines—who need a cost-effective, quality replacement that swaps in with minimal modification. If you require an OEM-equivalent crank motor built to automotive production standards and prefer new internal components over remanufactured units, the Boatrip 19612 starter is designed for your repair needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this starter fit my Briggs \u0026amp; Stratton Vanguard 35hp engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes if your engine is a 32–35 hp Vanguard V‑Twin; confirm by matching your OEM part number or mounting pattern before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Boatrip 19612 a new or remanufactured unit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This unit is built with new premium components rather than being remanufactured, and it comes with a two-year warranty.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585451589817,"sku":"B0B2153QN8","price":200.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_576848c2-6398-4f4a-a191-3906e787a6a9.jpg?v=1790470750"},{"product_id":"boatrip-starter-motor-replacement-863007a1-for-mercruiser-volvo-penta-1996-2007-direct-fit-2-year-warranty","title":"Boatrip Starter Motor Replacement 863007A1 for Mercruiser \u0026 Volvo Penta (1996–2007) — Direct Fit, 2‑Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 863007A1 is a direct-replacement starter motor engineered to restore reliable engine starting for 1996–2007 Mercruiser, Volvo Penta and Mercury Marine V6\/V8 outboard and stern drive engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis replacement starter is built to meet or exceed original equipment specifications and fits many 4.3L–8.2L gasoline marine engines. Designed and manufactured using controlled production processes and premium components, the unit targets boat owners, mariners and marine mechanics who need a durable, accurate-fit starter with a two‑year warranty. Below you'll find quick answers about fitment, installation, durability and compatibility so you can decide if this is the right replacement for your vessel.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and models does this starter motor fit?\u003c\/h3\u003e\n\u003cp\u003eThe Boatrip 863007A1 is purpose‑matched to a wide range of Mercruiser, Mercury and Volvo Penta applications from the mid‑1990s through the 2000s. It replaces several OE numbers and aftermarket references used across V6 and V8 gasoline models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Mercruiser, Mercury Marine and Volvo Penta 4.3, 5.0, 5.7, 6.2, 7.4 and 8.1\/8.2 engines.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for part numbers including 50-863007A1, Arco 30433\/30460, 57-30433 and others.\u003c\/li\u003e\n  \u003cli\u003eDesigned for 1996–2007 model years and similar mounting and electrical configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic mechanical tasks and battery disconnection safety. The starter uses OE-style mounting dimensions and electrical terminals so it typically slips into the existing bracket without machining.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools commonly required: socket set, torque wrench, screwdrivers and wire terminal tools.\u003c\/li\u003e\n  \u003cli\u003eDisconnect the battery, remove old starter, transfer heat shields or brackets if present, install new unit and torque mounting bolts to specification.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended if you lack electrical or marine mechanical experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat reliability and warranty support does Boatrip provide?\u003c\/h3\u003e\n\u003cp\u003eBoatrip manufactures this starter in facilities certified to automotive quality standards and follows traceable production controls. Components are new (not remanufactured) and inspected to ensure consistent fit and function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduced in an ISO\/TS\/IAFT quality-controlled environment with VRT process checks.\u003c\/li\u003e\n  \u003cli\u003eNew internal parts and upgraded materials for improved service life over worn OE units.\u003c\/li\u003e\n  \u003cli\u003eIncludes a two-year limited warranty — keep proof of purchase and confirm fitment before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Boatrip 863007A1 starter motor is aimed at boat owners, fleet operators and marine mechanics who need a cost-effective replacement that matches OEM mounting and electrical interfaces for Mercruiser, Mercury and Volvo Penta V6\/V8 gasoline engines from roughly 1996–2007. Choose this unit if you want a new-component replacement built to automotive quality standards, accurate fitment, and a two‑year warranty. If you’re unsure about fitment, consult your engine serial number, the original starter part number, or contact a certified marine technician before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this starter fit my 2001 Mercruiser 5.7 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes if your OEM starter matches the listed part numbers; verify by comparing mounting pattern and electrical connections before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this starter new or remanufactured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This Boatrip unit is manufactured with new components to meet or exceed OEM specifications, not a remanufactured core.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585509523641,"sku":"B0D7H8W2FQ","price":177.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_3a4d2766-b6cf-42a0-a6d4-4d90b3f7050b.jpg?v=1790471830"},{"product_id":"boatrip-starter-motor-replacement-for-kubota-zd326-zd331-zd25-zd28-d1105-25hp-diesel-direct-bolt-in-2-year-warranty","title":"Boatrip Starter Motor Replacement for Kubota ZD326 ZD331 ZD25 ZD28 D1105 25HP Diesel — Direct Bolt-In, 2-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 18413 is a direct-replacement starter motor built to fit Kubota ZD326, ZD331, ZD25 and ZD28 zero-turn mowers powered by the D1105 25HP diesel engine.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aftermarket starter is engineered as a bolt-in swap for OE numbers 1G069-63010 \/ 1G069-63011 \/ 1G069-63012 and other cross-references listed by the manufacturer. Designed and produced by a factory with automotive quality certifications, it aims to match or exceed OEM performance while offering a 2-year warranty and precision fit for straightforward installation on compatible Kubota models.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter motor fit my Kubota zero-turn mower?\u003c\/h3\u003e\n\n\u003cp\u003eIf your mower uses the D1105 25HP diesel engine and the OEM part number matches one of the listed references, this Boatrip 18413 starter is intended as a direct replacement. Confirm fitment by checking the OE numbers stamped on your original starter or the parts manual for your model.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with Kubota ZD326, ZD331, ZD25, ZD28 using D1105 engines\u003c\/li\u003e\n  \u003cli\u003eCross-references: 1G069-63010, 1G069-63011, 1G069-63012, 77700-02596, 428000-1160, SND0476\u003c\/li\u003e\n  \u003cli\u003eStandardized dimensions for bolt and terminal placement\u003c\/li\u003e\n  \u003cli\u003eAlways verify part number before purchase to ensure correct fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and durable is this Boatrip starter?\u003c\/h3\u003e\n\n\u003cp\u003eThe Boatrip starter is manufactured using new premium components and follows quality systems adopted by the factory, including IATF 16949 processes. That production control and component selection aim to deliver long service life and consistent cranking performance under normal operating conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt with new, premium-quality internal parts\u003c\/li\u003e\n  \u003cli\u003eFactory works under IATF 16949 and VRT-inspired quality procedures\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet or exceed OEM specifications\u003c\/li\u003e\n  \u003cli\u003e2-year limited warranty included for added confidence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and setup?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is intended to be straightforward because the unit uses standardized sizing and mounting locations that match the original starter. Basic hand tools and simple electrical connections are typically all that’s required; however, follow safety precautions and battery-disconnect procedures before starting work.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStandard bolt pattern for direct bolt-in replacement\u003c\/li\u003e\n  \u003cli\u003eIdentical terminal layout for quick electrical reconnection\u003c\/li\u003e\n  \u003cli\u003eRecommended to disconnect battery and follow torque specs\u003c\/li\u003e\n  \u003cli\u003eProfessional installation advised if you’re unfamiliar with mower electrical systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat benefits does choosing this aftermarket unit offer?\u003c\/h3\u003e\n\n\u003cp\u003eSelecting this Boatrip replacement balances cost and quality by providing a rebuilt-equivalent solution manufactured from new components to OEM tolerances. Buyers typically gain quicker availability and a competitive warranty compared with some dealer-only parts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCost-effective alternative to dealer-priced starters\u003c\/li\u003e\n  \u003cli\u003eFactory production and quality controls mirror automotive standards\u003c\/li\u003e\n  \u003cli\u003eNew parts rather than remanufactured cores for predictable performance\u003c\/li\u003e\n  \u003cli\u003eBacked by a 2-year warranty to protect against early failures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Boatrip 18413 starter is aimed at owners, landscapers, and small-fleet managers who operate Kubota ZD-series zero-turn mowers with the D1105 25HP diesel engine and need a dependable, ready-to-install replacement. It's also suited for repair shops and technicians seeking an aftermarket option that matches OEM fit and function while offering a solid warranty and quality-controlled manufacturing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter include a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Boatrip 18413 starter includes a 2-year warranty covering manufacturing defects under normal use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this myself on my Kubota mower?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Many owners can install it with basic tools, but disconnect the battery and follow safety steps. Professional installation is recommended if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585575125177,"sku":"B0B18MZRBJ","price":186.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_97055cf2-2992-4a4a-bda6-8ed6c4548c2e.jpg?v=1790472275"},{"product_id":"boatrip-starter-motor-replacement-for-17-25hp-john-deere-tractors-18266-direct-fit-all-new-components","title":"Boatrip Starter Motor Replacement for 17–25HP John Deere Tractors (18266) — Direct Fit, All-New Components","description":"\u003cstrong\u003eBoatrip 18266 is a direct-replacement starter motor engineered to fit 17–25HP John Deere tractors and compatible Kawasaki and Kubota engines.\u003c\/strong\u003e\n\n\u003cp\u003eIf your compact tractor or lawn engine won’t turn over, this Boatrip 18266 starter motor provides a durable, OEM-spec alternative designed for a straightforward swap. Built with all-new components in a certified factory, it targets reliable cranking for models like John Deere 325\/335 and X534, Kawasaki FH500V\/FH541V, and Kubota T1770\/T1780. The unit emphasizes exact fitment, long service life, and a two-year warranty for added buyer confidence.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter motor fit my John Deere 325, 335 or X534?\u003c\/h3\u003e\n\n\u003cp\u003eFitment depends on your engine and mounting pattern; the Boatrip 18266 was manufactured to match the bolt pattern and electrical connections used on many 17–25HP John Deere models. Verify your original starter’s part number, mounting flange, and pinion engagement before ordering. If those match the 18266 specifications, it should install without modification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible models commonly: John Deere 325, 335, X534 (confirm with original part).\u003c\/li\u003e\n  \u003cli\u003eDesigned for 17–25HP engines with the same mounting and pinion size.\u003c\/li\u003e\n  \u003cli\u003eIncludes standard electrical terminals for direct wiring swap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is this replacement starter?\u003c\/h3\u003e\n\n\u003cp\u003eThis starter is assembled from 100% new components in a factory certified to IATF 16949 standards, reflecting automotive-quality production controls. The internal drive, bearings, and solenoid are selected for repeated cranks under typical small-engine loads. Boatrip supports the part with a two-year warranty to back the build quality.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eManufactured under IATF 16949-aligned quality management.\u003c\/li\u003e\n  \u003cli\u003eAll-new internals rather than rebuilt or remanufactured parts.\u003c\/li\u003e\n  \u003cli\u003eTwo-year warranty for parts replacement if faults arise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what tools are required?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is typically direct—remove the old starter, transfer any brackets if needed, and bolt the Boatrip 18266 into place using the original hardware. Electrical connections are standard bolt or quick-disconnect terminals; basic hand tools and a battery disconnect are all that’s required. If you’re comfortable with routine small-engine maintenance, this is a one-person job in most cases.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCommon tools: socket set, wrenches, screwdrivers, safety gloves.\u003c\/li\u003e\n  \u003cli\u003eDisconnect battery before starting to avoid shorts or sparks.\u003c\/li\u003e\n  \u003cli\u003eTorque fasteners to OEM specs for secure mounting and alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and safety features should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe Boatrip 18266 focuses on consistent cranking torque and correct gear engagement to avoid starter slip or premature wear. Precision-machined mounting surfaces and pinion sizing reduce vibration and misalignment. The solenoid and electrical terminals meet industry norms for current capacity and secure connection.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrecision-fit mounting for reduced vibration and wear.\u003c\/li\u003e\n  \u003cli\u003eRobust solenoid and terminals to handle starting current demands.\u003c\/li\u003e\n  \u003cli\u003eBalanced armature and quality bearings for longer service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Owners and technicians who service compact tractors, riding mowers, or utility engines with 17–25HP Kawasaki or Kubota-based powerplants and John Deere models like 325\/335\/X534 will find this starter a practical replacement option. It’s aimed at DIYers and professional repair shops seeking a new-component alternative to remanufactured units, offering precise fitment, traceable factory production, and a two-year warranty. Always double-check your original starter’s physical dimensions, mounting pattern, and electrical connector types to ensure compatibility before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter include a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Boatrip 18266 starter comes with a two-year warranty against manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most mechanically inclined owners can install it using basic hand tools; disconnect the battery first and verify fitment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585576763577,"sku":"B09WHYRXR3","price":179.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_bef83a43-601b-419f-b4cb-1472fc6fb0c3.jpg?v=1790472360"},{"product_id":"boatrip-starter-replacement-for-3-6l-v6-2011-2021-chrysler-dodge-ram-direct-fit-new-components","title":"Boatrip Starter Replacement for 3.6L V6 (2011–2021) Chrysler\/Dodge\/Ram — Direct-Fit, New Components","description":"\u003cstrong\u003eBoatrip 19616 is a direct-fit replacement starter engineered for select 11–21 V6 3.6L Chrysler, Dodge, Ram, and 2014 Jeep Cherokee applications.\u003c\/strong\u003e\n\n\u003cp\u003eThis high-quality replacement starter from Boatrip is built to meet or exceed OEM specifications and intended as a drop-in solution for vehicles using the 3.6L V6 engine. Manufactured with new premium components in an ISO\/IAFT-certified facility, the unit aims to deliver reliable cranking, consistent engagement, and an accurate fit to simplify installation and minimize downtime.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter fit my vehicle model and engine?\u003c\/h3\u003e\n\u003cp\u003eThe Boatrip 19616 is designed for a specific range of 3.6L V6-equipped vehicles produced between 2011 and 2021, plus the 2014 Jeep Cherokee 3.2L application listed. Always verify part numbers and compare mounting points, electrical connections and solenoid orientation with your original unit before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Chrysler 200 and Town \u0026amp; Country models using the 3.6L V6.\u003c\/li\u003e\n  \u003cli\u003eFits Dodge Journey, Grand Caravan, and Avenger models in specified years.\u003c\/li\u003e\n  \u003cli\u003eSuitable for Ram C\/V Promaster 1500, 2500, 3500 with matching engine configuration.\u003c\/li\u003e\n  \u003cli\u003eIncludes the 2014 Jeep Cherokee 3.2L where specified—confirm engine code.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Boatrip ensure quality and longevity?\u003c\/h3\u003e\n\u003cp\u003eBoatrip manufactures this starter in a factory that follows IAFT\/ISO quality systems and Ford-promoted VRT processes. Components are new and selected to match or outperform OEM tolerances, and the production line emphasizes consistency to reduce fitment and reliability issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduced under IAFT 16949:2016-compliant procedures for automotive parts.\u003c\/li\u003e\n  \u003cli\u003eNew internal components to avoid recycled or reman issues.\u003c\/li\u003e\n  \u003cli\u003eStandardized machining and assembly for precise dimensions.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 2-year warranty for added confidence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and initial use?\u003c\/h3\u003e\n\u003cp\u003eThe Boatrip 19616 is built as a standardized direct-replacement unit so installation typically follows the same steps as the original starter. While many technicians or experienced DIYers can complete the swap with common hand tools, confirm torque specs and electrical connections to avoid charging or starting issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecise bolt hole locations for a straightforward mechanical fit.\u003c\/li\u003e\n  \u003cli\u003eCompatible electrical terminal layout to match vehicle harnesses.\u003c\/li\u003e\n  \u003cli\u003eRecommended to inspect flywheel teeth and mounting surface before installation.\u003c\/li\u003e\n  \u003cli\u003ePerform initial test cranking to verify engagement and no unusual noises.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this starter intended for?\u003c\/p\u003e\n\u003cp\u003eThis Boatrip replacement starter is for vehicle owners, fleet managers, and mechanics seeking a cost-effective, reliable direct-fit substitute for failed starters on compatible Chrysler, Dodge, Ram, and Jeep models. It's well-suited to repair shops that value standardized production quality and a 2-year warranty, and for DIYers comfortable verifying fitment and performing a straightforward starter swap.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Boatrip 19616 come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this starter includes a 2-year warranty from Boatrip against manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this starter myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if you have basic mechanical skills; confirm fitment, disconnect the battery, and follow proper torque and safety steps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585609892025,"sku":"B0C4FLPMBX","price":179.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_e7f202ad-0ce5-499c-bb21-a3ed2ab6e6fa.jpg?v=1790474258"},{"product_id":"boatrip-starter-motor-replacement-for-kawasaki-fr730v-fr691v-cub-cadet-z-force-48-54-60-direct-oem-fit-2-year-warranty","title":"Boatrip Starter Motor Replacement for Kawasaki FR730V\/FR691V \u0026 Cub Cadet Z-Force 48\/54\/60 — Direct OEM Fit, 2-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 5954 is a direct-replacement starter motor built to fit specified Kawasaki FR\/FS V-twin engines and select Cub Cadet zero-turn and lawn tractor models for reliable engine starts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement starter is engineered to match OEM fit and function for Kawasaki FR730V, FR691V, FR651V, FR600V, FS691V, FS651V and FS541V engines, and for Cub Cadet models such as Z-Force 48\/54\/60, RZT46, RZT50, LTX1046 and LTX1050. It is produced using new high-quality components in a facility certified to automotive quality standards and backed by a two-year warranty. The design focuses on accurate dimensions for straightforward installation and long-term dependability under normal lawn and garden use.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter motor fit my engine or mower model?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on the engine part number and your mower’s OEM starter reference. This unit replaces OE numbers 21163-0749, 21163-0743 and 21163-0727 and is intended for the listed Kawasaki and Cub Cadet models. Always verify the original starter’s mounting flange, electrical connection and pinion engagement before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OE: 21163-0749 \/ 21163-0743 \/ 21163-0727\u003c\/li\u003e\n  \u003cli\u003eFits Kawasaki FR\/FS V-twin engines noted above\u003c\/li\u003e\n  \u003cli\u003eCompatible with Cub Cadet Z-Force, RZT and LTX models listed\u003c\/li\u003e\n  \u003cli\u003eCheck mounting bolt pattern, shaft length, and connector type\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation for a DIY mower owner?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward for mechanically inclined owners with basic tools. Because dimensions follow OEM standards, the starter bolts into the same location and uses the same wiring connections on compatible engines. You may need to support the engine or raise the mower deck for access depending on the model.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandardized size for precise fitment and simple bolt-in replacement\u003c\/li\u003e\n  \u003cli\u003eUses the same electrical connections as the factory starter\u003c\/li\u003e\n  \u003cli\u003eTypical installation requires common hand tools and basic mechanical skill\u003c\/li\u003e\n  \u003cli\u003eRefer to mower\/service manual for torque specs and safety steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality controls and warranty cover this replacement starter?\u003c\/h3\u003e\n\u003cp\u003eThis starter is manufactured in a facility that follows automotive quality systems (IAFT 16949:2016 lineage) and applies process controls used in automotive parts production. Components are new and selected to meet or exceed OEM performance expectations. A two-year warranty covers manufacturing defects under normal use—keep purchase and fitment details for a warranty claim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduced under certified quality management processes\u003c\/li\u003e\n  \u003cli\u003eBuilt with new, premium components rather than remanufactured parts\u003c\/li\u003e\n  \u003cli\u003eTwo-year warranty for manufacturing defects\u003c\/li\u003e\n  \u003cli\u003eFollow seller instructions for claims and return procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this starter perform in typical lawn care use?\u003c\/h3\u003e\n\u003cp\u003eThe starter is intended for routine lawn and garden engine starting cycles and is engineered for dependable engagement of the engine flywheel in the listed applications. While not a performance upgrade, its construction aims for consistent starting and long service life when installed and used according to the engine and mower manufacturer’s guidelines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for consistent engagement with OEM flywheel teeth\u003c\/li\u003e\n  \u003cli\u003eAimed at normal duty cycles for residential and light commercial mowing\u003c\/li\u003e\n  \u003cli\u003eRegular maintenance of battery and electrical connections improves longevity\u003c\/li\u003e\n  \u003cli\u003eNot intended as a high-torque aftermarket modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Boatrip 5954 starter motor is for homeowners, lawncare professionals and repair shops that need a reliable, OEM-fit replacement for the specified Kawasaki FR\/FS engines and compatible Cub Cadet mower models. Choose this unit if you want a new-component replacement built in a certified facility, with accurate dimensions for a clean swap-in and a two-year warranty for added confidence.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter replace OE 21163-0749?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Boatrip 5954 unit replaces OE 21163-0749, 21163-0743 and 21163-0727 for the listed engines and mower models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is there a warranty with the replacement starter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The starter includes a two-year warranty covering manufacturing defects under normal use; keep order details for claims.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585629290681,"sku":"B0F47TPZZV","price":146.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_de5be3d1-a147-4d43-83d4-7bd0e0b851f4.jpg?v=1790474771"},{"product_id":"boatrip-starter-replacement-for-kohler-7000-series-courage-twin-9-tooth-20-25hp-direct-fit-2-year-warranty","title":"Boatrip Starter Replacement for Kohler 7000-Series \u0026 Courage Twin — 9‑Tooth 20–25HP Direct-Fit, 2-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 34009 is a direct-fit 9-tooth starter replacement built to match Kohler 7000-series and Courage Twin SV models, delivering OEM-style performance for 20–25 HP engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement starter is engineered for small engines used in lawn and garden equipment, offering a precision fit for models listed under Kohler OE numbers such as 3209801 and equivalent references. It’s manufactured by Boatrip with industry-standard quality systems and new internal components to restore reliable engine cranking without the unpredictability of worn original starters.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and part numbers does this starter replace?\u003c\/h3\u003e\n\u003cp\u003eThis unit replaces starters used on Kohler 7000 Series KT715–KT745 and Courage Twin SV710–SV840 engines spanning roughly 20HP to 25HP. It corresponds to various OE references so you can cross-check compatibility before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 20HP, 22HP, 24HP, and 25HP small engines\u003c\/li\u003e\n  \u003cli\u003eOE and cross-reference numbers: 3209801, 32-098-03, 32-098-04S, 410-21111, SAB0157\u003c\/li\u003e\n  \u003cli\u003eDesigned as a 9-tooth pinion starter for proper meshing with existing flywheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and well-made is the Boatrip replacement?\u003c\/h3\u003e\n\u003cp\u003eBoatrip manufactures starters with over two decades of experience and follows certified quality systems to ensure consistent production. New components are used throughout, and the factory holds IATF 16949-aligned quality controls, which helps reduce defects and improves longevity compared with worn OEM units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduced in an ISO\/IATF-certified facility following automotive-quality standards\u003c\/li\u003e\n  \u003cli\u003eNew internal parts instead of remanufactured components\u003c\/li\u003e\n  \u003cli\u003eTwo-year limited warranty to back expected durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this starter fit my mower or equipment and how hard is installation?\u003c\/h3\u003e\n\u003cp\u003eThe starter is made to match standard dimensions for the specified Kohler and Courage models, promoting a straightforward bolt-on replacement for owners comfortable with basic mechanical tasks. Verify engine model numbers and OE cross-references before ordering to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandardized dimensions for accurate alignment and bolt pattern match\u003c\/li\u003e\n  \u003cli\u003eElectrical connections follow OEM layouts for simple wiring reconnection\u003c\/li\u003e\n  \u003cli\u003eRecommended for users with basic hand tools; professional install available if preferred\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in terms of support and warranty?\u003c\/h3\u003e\n\u003cp\u003eBoatrip provides a two-year warranty on this starter, reflecting confidence in manufacturing quality and materials. If you encounter fitment or functional issues, having engine model details and OE numbers handy speeds resolution through the seller’s support channels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-year limited warranty included\u003c\/li\u003e\n  \u003cli\u003eCustomer support can assist with cross-reference and installation questions\u003c\/li\u003e\n  \u003cli\u003eReturn and replacement options depend on seller policy and proof of incompatibility or defect\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Boatrip 34009 starter is intended for owners, repair shops, and fleet managers who need a reliable replacement starter for Kohler 7000-series or Courage Twin small engines (20–25 HP). It’s a practical choice when the original starter fails or when you want a new, non-remanufactured unit with modern quality controls and a warranty for peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit Kohler KT715 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Boatrip 34009 is designed to fit Kohler 7000-series KT715 engines when matched to OE cross-reference numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty does the Boatrip starter include?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It includes a two-year limited warranty covering manufacturing defects; terms vary by seller.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67585830650041,"sku":"B0CZKHGGP1","price":137.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_a2cfdac2-26ad-4356-9aaa-69f12febc9a2.jpg?v=1790478423"},{"product_id":"boatrip-starter-for-kohler-7000-series-courage-twin-engines-10-tooth-20-27hp-new-components-2-year-warranty","title":"Boatrip Starter for Kohler 7000-Series Courage Twin Engines — 10‑Tooth, 20–27HP, New Components, 2‑Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 5801 is a direct-replacement 10‑tooth starter designed to fit Kohler 7000‑series Courage twin engines (20–27HP) with the listed part numbers and models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement starter is built for Kohler models including KT745, KT740, KT735, KT725 and the SV71x–SV84x family and corresponds to OEM references 3209808, 32‑098‑08, 3209801 and 3209803. It’s manufactured from all-new components in a factory that follows automotive quality systems and offers a two‑year warranty. The unit is sized to match standard mounting and electrical connections so you can get reliable starting performance without modifying your engine.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this starter fits my Kohler engine?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm fitment by matching your engine model and the starter tooth count to the product listing. This Boatrip 5801 is a 10‑tooth drive intended for Kohler 7000‑series twin engines in the 20–27 horsepower range; verify the OEM part numbers or compare the starter’s mounting pattern.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible models: KT745, KT740, KT735, KT725, SV715, SV720, SV725, SV730, SV735, SV740, SV840\u003c\/li\u003e\n  \u003cli\u003eOEM equivalents: 3209808, 32‑098‑08, 3209801, 3209803\u003c\/li\u003e\n  \u003cli\u003eDrive: 10 teeth — check your existing starter’s pinion\u003c\/li\u003e\n  \u003cli\u003eHorsepower range: 20HP–27HP — used on specified Courage twin engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and warranty details?\u003c\/h3\u003e\n\n\u003cp\u003eThis starter is assembled from 100% new components and produced under a factory quality system upgraded from ISO\/TS16949 to IATF 16949:2016. Production follows standardized procedures to ensure consistent dimensions and reliable operation; a two‑year warranty backs defects in materials and workmanship.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNew, premium internal components — no refurbished cores\u003c\/li\u003e\n  \u003cli\u003eManufacturing certified to IATF 16949:2016 standards\u003c\/li\u003e\n  \u003cli\u003eStandardized production for accurate fit and repeatable performance\u003c\/li\u003e\n  \u003cli\u003eTwo‑year limited warranty — check seller terms for coverage details\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic engine electrical work and hand tools. Remove the old starter, compare mounting holes and electrical terminals, and reinstall the Boatrip 5801 in the same orientation; torques and wiring remain the same as the OEM unit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTools: ratchet, sockets, torque wrench, and basic hand tools\u003c\/li\u003e\n  \u003cli\u003eSteps: disconnect battery, unbolt old starter, transfer any brackets, install replacement, reconnect electricals\u003c\/li\u003e\n  \u003cli\u003eTip: confirm pinion tooth count and clearance before tightening\u003c\/li\u003e\n  \u003cli\u003eWhen to consult a mechanic: unusual mounting differences or electrical issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose this Boatrip replacement instead of another aftermarket option?\u003c\/h3\u003e\n\n\u003cp\u003eBoatrip’s starter is designed specifically to match the form, fit and function of the referenced Kohler units while using new components rather than rebuilt parts. The factory’s long experience producing starters, adherence to automotive quality standards, and the included warranty reduce the risk of premature failure and make it a practical choice for maintenance or repair.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePurpose‑built to match OEM mounting and electrical interfaces\u003c\/li\u003e\n  \u003cli\u003eManufactured with quality control systems used in automotive supply chains\u003c\/li\u003e\n  \u003cli\u003eNew‑parts construction improves longevity over rebuilt cores\u003c\/li\u003e\n  \u003cli\u003eClear compatibility list and warranty provide buyer confidence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Owners, mechanics, or fleet managers who need a reliable replacement starter for Kohler 7000‑series Courage twin engines (20–27HP) — especially when the OEM reference numbers or the 10‑tooth pinion match your unit. It’s suited for routine engine maintenance, repair shops that prefer new-component replacements, and anyone looking for an economical alternative to buying direct OEM starters while retaining fit and function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter match Kohler OEM part 3209808?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Boatrip 5801 corresponds to OEM references including 3209808, 32‑098‑08, 3209801 and 3209803.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the pinion tooth count 10 teeth?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Correct — this replacement uses a 10‑tooth pinion intended for the listed 7000‑series Kohler engines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67586425815225,"sku":"B0C6XX12DS","price":137.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_5677b83f-8443-4874-8f58-637bafa9de8d.jpg?v=1790483314"},{"product_id":"boatrip-starter-motor-replacement-for-2003-2008-toyota-corolla-matrix-pontiac-vibe-1-8l-bolt-in-2-year-warranty","title":"Boatrip Starter Motor Replacement for 2003–2008 Toyota Corolla Matrix Pontiac Vibe 1.8L — Bolt‑In, 2-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 17841 is a direct-replacement starter motor engineered to restore reliable starting for 2003–2008 Toyota Corolla, Matrix and Pontiac Vibe vehicles with the 1.8L L4 engine.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle hesitates, cranks slowly, or fails to start and it uses the listed OE numbers (28100-0D080, 28100-22090, 428000-0340, 428000-1310, 88969483), this Boatrip starter is designed as a bolt-in replacement. Built by a factory with over two decades manufacturing experience and certified to IATF 16949 processes, the unit uses new premium components and standardized production to match OEM dimensions and mounting points. It ships with a two-year warranty and is intended for straightforward installation by a competent DIYer or mechanic.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter fit my Corolla, Matrix or Vibe?\u003c\/h3\u003e\n\n\u003cp\u003eCheck the model years and engine size against your vehicle’s VIN or existing starter part number. This Boatrip 17841 is specified for 2003–2008 Toyota Corolla, 2003–2008 Matrix and 2003–2008 Pontiac Vibe with the 1.8L L4 engine that use the listed OE numbers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirm your vehicle year, make, model and 1.8L engine code.\u003c\/li\u003e\n  \u003cli\u003eCompare the OE number stamped on your old starter to those listed above.\u003c\/li\u003e\n  \u003cli\u003eVerify electrical connector and mounting bolt pattern match before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this starter address common starting problems?\u003c\/h3\u003e\n\n\u003cp\u003eThe Boatrip starter replaces worn brushes, solenoids and drive gears with new parts to restore cranking speed and engagement. It eliminates issues caused by internal wear or electrical degradation while matching OEM torque and rotation direction.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNew internal components restore cranking RPM and engagement force.\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined housing ensures correct alignment with flywheel teeth.\u003c\/li\u003e\n  \u003cli\u003eFactory-tested units reduce the chance of early failure after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and warranty details?\u003c\/h3\u003e\n\n\u003cp\u003eManufactured in a facility with long experience in starter production and certified quality systems, this unit follows standardized processes for consistent dimensions and performance. Boatrip backs the starter with a two-year warranty to cover manufacturing defects under normal use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIATF 16949-aligned production and VRT-style control practices used in manufacture.\u003c\/li\u003e\n  \u003cli\u003eNew premium components—not remanufactured or core-exchange parts.\u003c\/li\u003e\n  \u003cli\u003eTwo-year warranty; keep your receipt and vehicle details for any claim.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic automotive repairs: remove battery negative, unbolt the old starter, swap electrical connections, and secure the replacement. Torque specs and safety precautions should be followed to ensure proper function and safe handling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTools typically required: socket set, torque wrench, jack and stands for access.\u003c\/li\u003e\n  \u003cli\u003eDisconnect the negative battery terminal before starting work.\u003c\/li\u003e\n  \u003cli\u003eCheck alignment and harness connectors; test cranking before reassembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This starter is aimed at owners and independent mechanics restoring dependable starting on 2003–2008 Toyota Corolla, Matrix or Pontiac Vibe vehicles equipped with the 1.8L L4 engine. It’s appropriate for buyers seeking an affordable new-unit replacement with OEM-compatible fitment, consistent manufacturing quality, and a two-year warranty. If you need a core exchange remanufactured unit, or your vehicle uses a different engine or starter OE, confirm compatibility before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Boatrip 17841 starter includes a two-year warranty against manufacturing defects with proof of purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this starter myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — basic mechanical skills and tools are enough, but disconnect the battery and follow torque specs for safe installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67586462154937,"sku":"B0BJDZMDQ8","price":173.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-starter-front-view_829cacb1-0d70-4d75-b64b-7949c89767a1.jpg?v=1790484083"},{"product_id":"boatrip-starter-replacement-for-kohler-sv470-sv620-18-21-hp-direct-fit-2-year-warranty","title":"Boatrip Starter Replacement for Kohler SV470–SV620 18–21 HP — Direct-Fit, 2-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 5796 is a direct-fit replacement starter engineered to replace Kohler and Johnson Electric part numbers on 18–21 HP single-engine applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis starter assembly is built to fit engines such as Kohler SV470 through SV620 and common small-engine equipment (including Toro mower model SAB0145). Manufactured using new premium components and produced under IAFT\/ISO-grade quality systems, the unit aims to match or exceed OEM specifications while offering a 2-year warranty. It's designed for hassle-minimized installation and reliable cranking performance when swapping out worn or failed starters on compatible single-engine platforms.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and models will this starter work with?\u003c\/h3\u003e\n\u003cp\u003eThe Boatrip 5796 is intended for a range of Kohler single engines and other small-engine applications specified by OEM part equivalence. It lists compatibility with Kohler Courage series SV470–SV620 and references Johnson Electric 2009805 plus several 20-098-xx part variants. Always verify your engine serial and part number to ensure a match before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacements for Kohler Courage SV470, SV480, SV530, SV590, SV600, SV620 series\u003c\/li\u003e\n  \u003cli\u003eEquivalent to Johnson Electric 2009805 and Kohler 20-098-08, 20-098-01, 20-098-11, 20-098-06S, 20-098-10S\u003c\/li\u003e\n  \u003cli\u003eSuitable for single-engine 18–21 HP applications and select Toro mower models like SAB0145\u003c\/li\u003e\n  \u003cli\u003eCheck engine model and mounting bolt pattern for final confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with small-engine maintenance: the starter mounts to the engine bell housing and connects to the battery and solenoid. The standardized production and accurate sizing reduce alignment issues common with aftermarket parts. If you're replacing the starter yourself, basic hand tools are typically sufficient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: socket set, wrenches, screwdrivers, and a torque wrench for final tightening\u003c\/li\u003e\n  \u003cli\u003eDisconnect the battery before removal to avoid shorts or sparks\u003c\/li\u003e\n  \u003cli\u003eReplace mounting bolts and electrical connectors in the original orientation\u003c\/li\u003e\n  \u003cli\u003eExpect installation time of about 30–60 minutes for most DIYers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality controls and warranty cover this replacement starter?\u003c\/h3\u003e\n\u003cp\u003eThis starter is produced by a factory with long-term focus on starter components and quality systems in place. The manufacturer holds IAFT 16949 (formerly ISO\/TS16949) certifications and follows industry-grade quality management practices. A two-year warranty covers workmanship and manufacturing defects—review the seller’s terms for warranty start and conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduced under IAFT 16949 quality standards with process controls\u003c\/li\u003e\n  \u003cli\u003eBuilt from new premium components to meet or exceed OEM tolerances\u003c\/li\u003e\n  \u003cli\u003eStandardized dimensions for reliable, repeatable fitment\u003c\/li\u003e\n  \u003cli\u003eTwo-year limited warranty—check the seller listing for exclusions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Boatrip 5796 starter is made for mechanics, lawn-care professionals, and DIY owners of small-engine equipment who need a reliable, cost-effective replacement for failed starters on 18–21 HP single engines. It's suited to users who want OEM-equivalent fitment and are comfortable verifying engine part numbers before purchase. If you require factory-level quality controls, precise sizing for straightforward installation, and a warranty-backed replacement, this product addresses those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this starter compatible with my Kohler SV590 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes—Boatrip 5796 covers SV470–SV620 series. Confirm by matching your engine model and existing starter part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the starter come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the product includes a two-year limited warranty covering manufacturing defects; check seller terms for specifics.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67586610692281,"sku":"B0C6XYTH6H","price":137.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-5796-front-view.jpg?v=1790488297"},{"product_id":"boatrip-steel-starter-gear-replacement-for-briggs-stratton-16-tooth-hardened-steel-oem-fit","title":"Boatrip Steel Starter Gear replacement for Briggs \u0026 Stratton — 16‑Tooth, Hardened Steel OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eBoatrip 5742 is a 16‑tooth steel starter gear engineered as a direct replacement for select Briggs \u0026amp; Stratton and John Deere small‑engine starters from 1972–2002.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement gear restores reliable engagement between the starter drive and flywheel on small engines rated between about 5–22 HP. Made from hardened steel and produced under an automotive‑grade quality system, the Boatrip 5742 is designed to meet OEM dimensions and tolerances so it slides on and meshes precisely with factory components. It is offered with a two‑year warranty and is intended for technicians, lawn‑equipment owners, and repair shops that need a durable spare part to return a starter to service.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and part numbers does this gear fit?\u003c\/h3\u003e\n\u003cp\u003eThe Boatrip 5742 gear is compatible with a range of Briggs \u0026amp; Stratton and John Deere starter applications. Check the engine model years and part numbers before ordering to confirm fit. This gear replaces commonly referenced part numbers used across multiple small‑engine platforms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM references: Briggs \u0026amp; Stratton 497595, 390838, MIU13772, and similar numbers.\u003c\/li\u003e\n  \u003cli\u003eFits engine model years roughly from 1972 through 2002 on many 5–22 HP units.\u003c\/li\u003e\n  \u003cli\u003eAlso used in select John Deere starter assemblies listed with cross‑reference part numbers.\u003c\/li\u003e\n  \u003cli\u003eDesigned for applications with a 16‑tooth pinion profile; verify tooth count before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Boatrip 5742 ensure durable performance?\u003c\/h3\u003e\n\u003cp\u003eThe gear is manufactured from high‑strength steel and heat‑treated to resist wear from repeated starter engagement. Production follows automotive quality standards to maintain consistent dimensions so the gear meshes cleanly with mating components and minimizes premature failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened steel construction for improved longevity under load.\u003c\/li\u003e\n  \u003cli\u003ePrecision machining to OEM tolerances for a snug, correct fit.\u003c\/li\u003e\n  \u003cli\u003eQuality controls based on IAFT\/TS processes used in automotive part manufacturing.\u003c\/li\u003e\n  \u003cli\u003eCorrosion‑resistant finish to withstand outdoor storage and use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and fitment?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires basic hand tools and some mechanical familiarity. The 5742 is a direct‑fit component when matched to the correct starter model; however, slight variations in older assemblies may need cleaning or light fitting to accept the new gear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect the starter shaft and retaining components for wear before installing.\u003c\/li\u003e\n  \u003cli\u003eClean mating surfaces and remove debris to ensure smooth seating of the gear.\u003c\/li\u003e\n  \u003cli\u003eUse correct retaining clips or fasteners as originally specified by the starter maker.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, compare the old gear’s tooth count and bore to this part before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances come with this part?\u003c\/h3\u003e\n\u003cp\u003eBoatrip backs the 5742 gear with a two‑year warranty and manufactures components under documented quality systems. The factory follows recognized automotive quality standards to control materials and dimensional tolerances across production runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo‑year limited warranty from purchase.\u003c\/li\u003e\n  \u003cli\u003eProduced in a facility certified to IAFT\/TS quality processes.\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet or exceed common OEM specifications for starter gears.\u003c\/li\u003e\n  \u003cli\u003eSold as a single replacement gear; verify fitment details in your parts list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Boatrip 5742 replacement gear is aimed at mechanics, small‑engine repair professionals, and DIY owners maintaining lawn tractors, generators, and similar equipment using Briggs \u0026amp; Stratton or compatible John Deere starters. If you need a robust, accurately machined 16‑tooth starter gear to restore starting reliability and want the assurance of automotive‑grade manufacturing and a two‑year warranty, this part is a practical choice. Always compare the old part’s numbers, tooth count, and bore dimensions to confirm compatibility before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this gear fit my Briggs \u0026amp; Stratton starter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your old gear’s tooth count (16), part number, and bore dimensions to the 5742; compatible with listed Briggs \u0026amp; Stratton references.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take and what tools are needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typical installation takes 15–45 minutes with basic hand tools; cleaning the shaft and using correct retaining hardware is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Boatrip","offers":[{"title":"Default Title","offer_id":67587591798969,"sku":"B0C6XZPN2D","price":115.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/boatrip-5742-front-gear.jpg?v=1790514162"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/boatrip-5742-front-gear.jpg?v=1790612633","url":"https:\/\/redleafauto.ca\/collections\/boatrip.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}