{"title":"Bulbs, Wipers \u0026 Replacement Parts","description":"\u003cp\u003eWear and service parts you can fit at home or hand to your shop: winter and beam wiper blades, headlight, fog and signal bulbs, interior LED kits, oil, air and cabin filters, brake pads and rotors, spark plugs, batteries, belts and sensors. Every part listing states the vehicles it fits; if yours is not named, ask before ordering rather than after.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat to look for:\u003c\/strong\u003e the bulb type from your owner’s manual or the old bulb (H11, 9005, 3157, 194 and so on); wiper blades by length and connector type, and a winter blade with a rubber boot if you park outside; DOT-compliant lighting for anything used on the road; and filters matched to the engine code, not just the model. When in doubt, email us your VIN and we check. \u003c\/p\u003e\u003cp\u003eRelated: \u003ca href=\"\/collections\/tools-garage\"\u003etools\u003c\/a\u003e, \u003ca href=\"\/collections\/winter-driving\"\u003ewinter driving\u003c\/a\u003e and \u003ca href=\"\/blogs\/guides\/road-salt-rust-protection-canada\"\u003erust protection\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"z-offroad-4x6-60w-led-headlight-kit-4-pack-dot-approved-rectangular-h4651-h4652-fit-ip67-waterproof","title":"Z-OFFROAD 4x6\" 60W LED Headlight Kit — 4-Pack DOT Approved Rectangular H4651\/H4652 Fit, IP67 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eZ-OFFROAD 4x6\" 60W LED headlight kit is a DOT-approved, plug-and-play rectangular bulb replacement that delivers brighter, wider light and long-lasting durability for vehicles using 4x6\" sealed-beam housings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade worn or dim rectangular sealed-beam headlights with this 4-piece Z-OFFROAD LED set designed to match common H4651\/H4652\/H4656\/H4666\/H6545 fitments. Each lamp pairs die-cast aluminum housing with a UV-protected polycarbonate lens to resist clouding and impact. With DOT SAE certification and IP67 ingress protection, these units are engineered for road legality, rugged conditions, and improved nighttime visibility compared with old halogen sealed beams.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these LED headlights improve nighttime visibility?\u003c\/h3\u003e\n\u003cp\u003eThe Z-OFFROAD LEDs use high-intensity chips and an engineered beam pattern to produce a brighter, more uniform spread of light with reduced hot spots. High beam output is rated at about 3600 lumens per unit while low beam is approximately 2800 lumens per unit, offering stronger forward illumination and a wider peripheral reach than traditional sealed beams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3600 lm per headlight on high beam, 2800 lm on low beam for increased range.\u003c\/li\u003e\n  \u003cli\u003eEngineered beam pattern for controlled cutoff and wider side illumination.\u003c\/li\u003e\n  \u003cli\u003eAnti-flicker harness included to maintain stable light output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eThese 4x6\" LED units replace most common rectangular sealed-beam part numbers including H4656, H4651, H4652, H4666 and H6545. The kit is 100% plug-and-play with supplied H4 3-pin male connectors and H4 9003 HB2 wiring harnesses, so no cutting or splicing is normally required for compatible sockets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacements for H4651\/H4652\/H4656\/H4666\/H6545 sealed-beam housings.\u003c\/li\u003e\n  \u003cli\u003eIncludes 4x H4 3-pin male lamps and 4x H4 9003 HB2 harnesses for installation.\u003c\/li\u003e\n  \u003cli\u003eFits many trucks and cars: Freightliner, Peterbilt, Kenworth, Chevy models and classic cars with 4x6\" headlight systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protections are built into the headlights?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies combine a die-cast aluminum body for heat dissipation with a hard-coated polycarbonate lens that resists yellowing and impact. IP67 certification means the headlights are dust-tight and protected against temporary immersion, while the UV coating and robust housing extend service life in harsh environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDie-cast aluminum housing for effective thermal management.\u003c\/li\u003e\n  \u003cli\u003eUV-protected, hard-coated polycarbonate lens to prevent clouding.\u003c\/li\u003e\n  \u003cli\u003eIP67 waterproof\/dustproof rating for reliable performance in bad weather.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these DOT-approved and road legal?\u003c\/h3\u003e\n\u003cp\u003eYes — these Z-OFFROAD rectangular LED headlights carry DOT SAE approval (refer to DOT SAE MS-4686 HL VOR 19 for verification). That certification indicates the lights meet specific regulatory standards for automotive lighting when installed correctly in compatible housings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDOT SAE approved for on-road use when fitted in compatible sealed-beam housings.\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet beam pattern and safety standards referenced by NHTSA searchable codes.\u003c\/li\u003e\n  \u003cli\u003eProper installation into the intended 4x6\" housing is required for compliance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 4-pack from Z-OFFROAD suits drivers who need a direct, reliable upgrade for vehicles using 4x6\" sealed-beam headlights — from classic cars and pickups to heavy-duty trucks like Kenworth, Peterbilt and Freightliner models. It's a practical choice for owners seeking improved nighttime visibility, durable construction for off-road or work use, and a plug-and-play retrofit without major rewiring. Ideal for mechanics, restoration projects, fleet maintenance, and drivers wanting a brighter, longer-lasting light solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these LEDs plug into a stock 4x6 headlight socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes H4 3-pin male bulbs and H4 9003 HB2 harnesses for plug-and-play installation in compatible 4x6\" sockets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these headlights waterproof and DOT approved?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are IP67 rated for water\/dust protection and DOT SAE approved (see DOT SAE MS-4686 HL VOR 19 for reference).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Z-OFFROAD","offers":[{"title":"Default Title","offer_id":67584845873337,"sku":"B07J5D2RTM","price":340.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/z-offroad-front-view-4x6-led-headlight-assembly.jpg?v=1790456278"},{"product_id":"cciyu-front-disc-brake-calipers-pair-for-jeep-184340-184339-no-bracket-66mm-phenolic-piston-hardware-included","title":"cciyu Front Disc Brake Calipers Pair for Jeep (184340\/184339) — No Bracket, 66mm Phenolic Piston, Hardware Included","description":"\u003cp\u003e\u003cstrong\u003ecciyu front left and right disc brake calipers (184340 \u0026amp; 184339) are direct-fit replacement calipers designed to restore reliable front braking performance for compatible Jeep models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese calipers are a pair of front driver and passenger side units built to match or exceed OEM specifications. They come without mounting brackets but include installation hardware, use a single 66 mm phenolic piston per caliper, and feature reinforced sealing to minimize brake fluid leakage. The assemblies reference popular OEM numbers so you can cross-check fitment for a wide range of Cherokee, Grand Cherokee, Wrangler, TJ, Comanche, Wagoneer and Grand Wagoneer model years.\u003c\/p\u003e\n\n\u003ch3\u003eWill these calipers fit my Jeep?\u003c\/h3\u003e\n\u003cp\u003eThey are intended for many Jeep applications from early 1990s through 2006, but fitment can vary by drive type and brake options. Always confirm compatibility by entering your specific vehicle details on the product page and comparing the reference numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovers Jeep Cherokee 1990–2001 (includes RWD and 4WD variants; note two-pad inspection hole detail)\u003c\/li\u003e\n  \u003cli\u003eFits Jeep Grand Cherokee 1993–1998 and Wagoneer\/Grand Wagoneer models listed\u003c\/li\u003e\n  \u003cli\u003eCompatible with Wrangler\/TJ model years 1990–2006 across specified ranges\u003c\/li\u003e\n  \u003cli\u003eCross-references OEM numbers: 184340, 184339, 18-4340, 18-4339, 5252984\/85, 4883344 variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical specs and materials?\u003c\/h3\u003e\n\u003cp\u003eEach caliper is a single-piston design using a 66 mm phenolic piston that resists heat transfer and helps protect brake fluid. Ports for bleeder and inlet are standard 3\/8 x 24 threads, and the package contains new installation hardware but not the mounting bracket.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePiston diameter: 2.6 inch (66 mm)\u003c\/li\u003e\n  \u003cli\u003eBleeder and inlet port size: 3\/8 x 24\u003c\/li\u003e\n  \u003cli\u003ePiston count: 1 per caliper; piston material: phenolic\u003c\/li\u003e\n  \u003cli\u003eBracket not included; installation hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these calipers address leaks and noise?\u003c\/h3\u003e\n\u003cp\u003ecciyu calipers incorporate thickened rubber seals and precision-machined pistons to reduce the chance of brake fluid seepage. Tighter sealing and accurate piston tolerances help maintain consistent braking force and reduce abnormal noises caused by fluid loss or piston misalignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThickened rubber sealing rings for improved leak resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-precision pistons to ensure smooth retraction and application\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain stable hydraulic pressure under normal driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThese calipers are supplied with the necessary hardware to make installation straightforward for a professional or experienced DIYer, but mounting brackets are sold separately if required. After installation, bleed the brake system to remove air and check for correct pedal feel and leak-free operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes installation hardware but not caliper brackets\u003c\/li\u003e\n  \u003cli\u003eStandard brake bleeding procedure recommended after fitment\u003c\/li\u003e\n  \u003cli\u003eVerify port thread compatibility and torque specifications to OEM values\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These cciyu front calipers are suited for Jeep owners and mechanics restoring or maintaining older Jeep Cherokee, Grand Cherokee, Wrangler, TJ, Comanche, Wagoneer and Grand Wagoneer models who need a reliable, OEM-compatible replacement. Choose this set if you want single-piston phenolic units with enhanced sealing, straightforward installation hardware included, and cross-reference compatibility with common OEM part numbers. Always confirm your vehicle year, drive type (2WD\/4WD\/AWD), and any heavy-duty options before ordering to ensure proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these calipers include mounting brackets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the calipers do not include mounting brackets; installation hardware is included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these calipers compatible with my 1998 Jeep Grand Cherokee?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They list fitment for Grand Cherokee 1993–1998; verify by entering vehicle details and cross-checking reference numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"cciyu","offers":[{"title":"Default Title","offer_id":67584845938873,"sku":"B0C7CK7BST","price":213.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/cciyu-front-calipers-pair-front-view.jpg?v=1790456277"},{"product_id":"viqua-s200rl-ho-uv-replacement-lamp-high-output-oem-bulb-for-vh200-series-12-month-life","title":"Viqua S200RL-HO UV Replacement Lamp — High-Output OEM Bulb for VH200 Series, 12-Month Life","description":"\u003cp\u003e\u003cstrong\u003eViqua S200RL-HO is the genuine OEM high-output UV replacement lamp designed to restore your Viqua VH200-series system’s ultraviolet performance quickly and reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your Viqua UV system needs a fresh bulb, the S200RL-HO provides the exact fit and engineered performance the manufacturer intended. This replacement lamp is built to work with multiple Viqua systems, delivering consistent UV-C output so your unit runs as designed. Replacing the lamp annually keeps the system operating within its original specifications and helps preserve warranty coverage.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this lamp fit my existing Viqua system?\u003c\/h3\u003e\n\u003cp\u003eThe S200RL-HO is an exact OEM replacement for a range of Viqua models, so installation is straightforward and requires no modification. It is made to align with the original lamp holder and electrical connections in compatible units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with VH200, SC-200 and SCM-200 models\u003c\/li\u003e\n  \u003cli\u003eAlso fits SP200-HO, SPV-3.5 and discontinued SPV-200 systems\u003c\/li\u003e\n  \u003cli\u003eDirect plug-in replacement; no special tools needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the Viqua S200RL-HO lamp?\u003c\/h3\u003e\n\u003cp\u003eViqua recommends replacing this high-output lamp every 12 months to maintain adequate UV intensity. Over time, lamp output declines even if the bulb still lights, so annual replacement ensures your system performs as originally specified.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace once every 12 months for consistent UV-C output\u003c\/li\u003e\n  \u003cli\u003eAnnual change helps maintain system performance and reliability\u003c\/li\u003e\n  \u003cli\u003eUsing genuine parts supports manufacturer warranty terms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat benefits does using a genuine Viqua lamp provide?\u003c\/h3\u003e\n\u003cp\u003eChoosing an OEM Viqua lamp helps ensure the replacement matches the original engineering tolerances and output curve. Genuine lamps reduce the risk of fitment issues and support the intended disinfection performance of your unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for precise fit and electrical compatibility\u003c\/li\u003e\n  \u003cli\u003eConsistent high-output UV-C emission throughout service life\u003c\/li\u003e\n  \u003cli\u003eSupports system reliability and manufacturer recommendations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and do I need a pro?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be user-friendly: the lamp is a direct replacement that slides into the existing lamp holder and connects to the ballast. Most homeowners can change the bulb safely by following the system manual and turning off power first.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick, tool-free replacement in most systems\u003c\/li\u003e\n  \u003cli\u003ePower off the unit before servicing to ensure safety\u003c\/li\u003e\n  \u003cli\u003eRefer to your system manual for step-by-step guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Viqua S200RL-HO lamp is ideal for homeowners and maintenance professionals who own VH200-series or other compatible Viqua UV systems and want to maintain reliable ultraviolet performance. If you prefer using original manufacturer parts to preserve system integrity and warranty eligibility, this OEM high-output lamp is intended for you. Replace annually to keep your water treatment system operating as designed.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this lamp in a VH200 system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The S200RL-HO is an exact OEM replacement for VH200 and compatible Viqua models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace the lamp every year?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Replace the lamp annually to maintain the system's designed UV output and performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Viqua","offers":[{"title":"Default Title","offer_id":67584846004409,"sku":"B002WDMHPO","price":302.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/viqua-s200rl-ho-front-view.jpg?v=1790456278"},{"product_id":"mikafex-led-tail-lights-for-2003-2006-chevy-silverado-1500-2500-3500-clear-black-lens-oem-fit","title":"MiKaFex LED Tail Lights for 2003–2006 Chevy Silverado 1500\/2500\/3500 — Clear Black Lens, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eMiKaFex LED tail lights replace factory rear lamps on select 2003–2006 Chevy Silverado models for a brighter, longer-lasting, OEM-fit lighting upgrade.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese LED tail lights are engineered to fit 2003–2006 Chevy Silverado 1500, 1500 HD, 2500, 2500 HD, and 2004–2006 Silverado 3500 models (also fits certain 2007 Classic applications except 3500HD). Built to OEM specifications from durable ABS with a clear black lens, the lights are designed as direct replacements for the listed GM part numbers so you can restore rear lighting performance and appearance without wiring modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lights fit my Silverado exactly?\u003c\/h3\u003e\n\u003cp\u003eThey are designed to match the factory mounting points and connectors on the compatible model years and trims listed. Check your vehicle year and model against the compatibility list and part numbers before ordering to ensure a direct swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2003–2006 Silverado 1500 \u0026amp; 1500 HD\u003c\/li\u003e\n  \u003cli\u003eCompatible: 2003–2006 Silverado 2500 \u0026amp; 2500 HD\u003c\/li\u003e\n  \u003cli\u003eCompatible: 2004–2006 Silverado 3500; some 2007 Classic models (not 2007 Classic 3500HD)\u003c\/li\u003e\n  \u003cli\u003eReplaces GM part numbers: GM2800174, GM2801174, GM2800161, GM281161, 19169002–19169005\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these tail lights improve visibility and durability?\u003c\/h3\u003e\n\u003cp\u003eThe LED modules provide brighter, more consistent illumination than older incandescent bulbs, helping other drivers see your brake and signal lights sooner. Constructed from impact-resistant ABS plastic with a clear black lens, the assemblies resist corrosion and weathering for longer service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLED output for clearer brake and running light visibility\u003c\/li\u003e\n  \u003cli\u003eABS housing resists cracks and moisture intrusion\u003c\/li\u003e\n  \u003cli\u003eClear black lens offers modern styling with UV resistance\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet original equipment fit and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I need to install these tail lights—any wiring or tools required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be a straightforward, bolt-on replacement using the existing factory connectors and hardware. Basic hand tools are typically all that’s needed; no cutting, splicing, or aftermarket adapters should be required when used on compatible models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses factory mounting points and electrical connectors\u003c\/li\u003e\n  \u003cli\u003eSimple swap-out—remove old assembly, install new, secure bolts\u003c\/li\u003e\n  \u003cli\u003eNo special wiring harness usually needed for listed Chevy models\u003c\/li\u003e\n  \u003cli\u003eRefer to vehicle manual for torque specs and safety steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I verify before buying to avoid returns?\u003c\/h3\u003e\n\u003cp\u003eConfirm the exact year, model, and trim of your Silverado and compare it with the compatibility list and GM part numbers provided. Visual-check the existing taillight shape and connector type to ensure you receive the correct left or right assembly for your truck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch your truck’s year and model to the compatibility list\u003c\/li\u003e\n  \u003cli\u003eCompare GM replacement part numbers where possible\u003c\/li\u003e\n  \u003cli\u003eInspect current taillight for identical mounting and connector style\u003c\/li\u003e\n  \u003cli\u003eContact seller with VIN or photos if uncertain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers and technicians who want a reliable, OEM-spec LED replacement for worn, damaged, or outdated tail light assemblies on compatible 2003–2006 Chevrolet Silverado pickups. These units suit owners who need a direct-fit upgrade with improved illumination, durable ABS construction, and a contemporary clear black lens—ideal for restoration projects, truck maintenance shops, and Silverado enthusiasts aiming to maintain factory alignment and electrical compatibility without aftermarket modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these tail lights plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. On compatible 2003–2006 Silverado models they use factory connectors and mount points for a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these replace specific GM part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They replace GM2800174, GM2801174, GM2800161, GM281161, and 19169002–19169005 part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MiKaFex","offers":[{"title":"Default Title","offer_id":67584846069945,"sku":"B0D91WL3VQ","price":271.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/mika-fex-front-assembly-chevy-silverado-tail-light.jpg?v=1790456275"},{"product_id":"mikafex-led-tail-light-for-2003-2006-chevy-silverado-1500-2500-3500-clear-red-lens-direct-fit-oem-replacement","title":"MiKaFex LED Tail Light for 2003-2006 Chevy Silverado 1500\/2500\/3500 — Clear Red Lens, Direct-Fit OEM Replacement","description":"\u003cp\u003e\u003cstrong\u003eMiKaFex LED Tail Light is a direct-fit, OEM-compatible replacement designed for 2003–2006 Chevy Silverado 1500, 1500 HD, 2500, 2500 HD and 2004–2006 Silverado 3500 models (excluding 2007 Classic 3500HD).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Silverado needs a bright, durable tail light assembly that matches factory fit and finish, this MiKaFex LED Tail Light offers a practical, long-lasting solution. Built from high-quality ABS with a clear red lens and factory-tested to meet or exceed OEM standards, it installs as a direct swap for the listed GM part numbers. The unit is made to resist corrosion and everyday wear so it continues to perform under typical driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tail light fit my specific Silverado model?\u003c\/h3\u003e\n\u003cp\u003eThe assembly fits 2003–2006 Chevy Silverado 1500 and 1500 HD, 2003–2006 Silverado 2500 and 2500 HD, and 2004–2006 Silverado 3500. It does not fit the 2007 Classic 3500HD model, so confirm the year and variant before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2003, 2004, 2005, 2006 (plus 2007 Chevy Classic in some 1500\/2500 models).\u003c\/li\u003e\n  \u003cli\u003eSpecific models: 1500, 1500 HD, 2500, 2500 HD, 3500 (2004–2006).\u003c\/li\u003e\n  \u003cli\u003eNot compatible: 2007 Classic 3500HD.\u003c\/li\u003e\n  \u003cli\u003eCross-references: GM2800174, GM2801174, GM2800161, GM2801161, 19169002–19169005.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the MiKaFex unit compare to an original equipment tail light?\u003c\/h3\u003e\n\u003cp\u003eThis LED tail light is manufactured to match factory dimensions and electrical connections so it can replace the original without modification. The housing is ABS plastic with a clear red lens that resists corrosion and discoloration, and the product has been factory-tested to meet or exceed OEM performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: durable ABS plastic housing for impact and weather resistance.\u003c\/li\u003e\n  \u003cli\u003eLens: clear red lens engineered to maintain light output and color.\u003c\/li\u003e\n  \u003cli\u003eTesting: factory-tested to align with OEM standards for fit and function.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement: designed for bolt-in installation using existing mounts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended as a direct swap into your Silverado's existing tail light location using the vehicle's original mounting points and wiring harness. No printed installation guide is included, so basic experience with automotive bulb\/assembly replacement or access to model-specific instructions is recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting: direct-fit using factory screw locations and brackets.\u003c\/li\u003e\n  \u003cli\u003eWiring: compatible with OEM connectors and sockets; no splicing required for standard models.\u003c\/li\u003e\n  \u003cli\u003eInstructions: no printed manual included—refer to vehicle repair guide if needed.\u003c\/li\u003e\n  \u003cli\u003eCare: clean lens periodically to retain brightness and visibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This MiKaFex LED Tail Light is ideal for Silverado owners who need a reliable, OEM-compatible replacement for a damaged, faded or malfunctioning rear lamp. It suits do-it-yourself mechanics who want a direct-fit part, fleet operators seeking consistent maintenance cost control, and anyone replacing a broken unit with a long-lasting ABS assembly that maintains factory appearance and function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this tail light compatible with a 2005 Chevy Silverado 2500HD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits 2003–2006 Chevy Silverado 2500 and 2500 HD models as a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include installation instructions or hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The unit is a direct-fit replacement but does not include an installation guide or additional hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MiKaFex","offers":[{"title":"Default Title","offer_id":67584846135481,"sku":"B0CLJ3BDYN","price":271.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/mikafex-front-assembly-chevy-silverado-tail-light.jpg?v=1790456277"},{"product_id":"mikafex-tail-light-assembly-for-2003-2006-chevy-silverado-1500-2500-3500-smoke-black-led-with-bulbs-wiring","title":"MiKaFex Tail Light Assembly for 2003–2006 Chevy Silverado 1500\/2500\/3500 — Smoke Black LED with Bulbs \u0026 Wiring","description":"\u003cp\u003e\u003cstrong\u003eMiKaFex smoke black LED tail light assemblies replace both driver and passenger rear lamps for 2003–2006 Chevy Silverado models and come with bulbs and a wiring harness for direct-fit installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a factory-style replacement that updates the look of your Silverado while maintaining OEM fit, these MiKaFex tail lights offer a smoked lens, durable ABS housing and LED brake light performance with included bulb and wiring. Designed to meet original mounting points and match the 2003–2006 Silverado 1500, 1500 HD, 2500, 2500 HD and 3500 model years (plus the 2007 Classic where noted), the assemblies come pre-wired to simplify installation and reduce aftermarket modification.\u003c\/p\u003e\n\n\u003ch3\u003eWill these tail lights fit my Silverado?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are built to match the factory dimensions and connection style for the specified model years. They are compatible with 2003–2006 Silverado 1500\/1500HD, 2003–2006 Silverado 2500\/2500HD, and 2004–2006 Silverado 3500 models. Note the 2007 Classic 3500HD is not supported.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility: 2003–2006 Silverado 1500, 1500HD, 2500, 2500HD, 2004–2006 Silverado 3500\u003c\/li\u003e\n  \u003cli\u003eNot compatible with: 2007 Classic 3500HD\u003c\/li\u003e\n  \u003cli\u003eReplaceable part numbers: GM2800174, GM2801174, GM2800161, GM2801161, 19169002–19169005\u003c\/li\u003e\n  \u003cli\u003eDriver and passenger side sets available\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eEach tail light set ships with bulbs already installed and a wiring harness to plug into factory connectors, reducing time and the need for splicing. Because the housing follows OEM mounting points, installation generally requires basic hand tools and no major modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes bulbs pre-installed for brake and signal functions\u003c\/li\u003e\n  \u003cli\u003eSupplied wiring harness for direct connection to factory wiring\u003c\/li\u003e\n  \u003cli\u003eMounts align with original bolt locations for a bolt-on fit\u003c\/li\u003e\n  \u003cli\u003eInstructions and fit notes provided—verify vehicle model before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eMiKaFex tail lights use a sturdy ABS plastic housing and a clear smoked lens engineered to resist road wear and environmental factors. The lens and housing combination supports long-term use while preserving a darker aesthetic compared with stock units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHousing material: high-quality ABS plastic for impact and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eLens: clear smoke finish for a modern appearance\u003c\/li\u003e\n  \u003cli\u003eTested to match OEM specifications for fit and function\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand humidity and typical road conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These MiKaFex smoked LED tail light assemblies are aimed at Silverado owners who want a like-for-like replacement with an upgraded smoked look and the convenience of included bulbs and harnesses. They suit drivers replacing damaged or faded factory lights, enthusiasts refreshing the truck’s rear styling, or anyone needing a direct-fit solution that adheres to original mounting and electrical configurations. Before ordering, double-check your model year and submodel to confirm compatibility, and contact the seller if you have any fitment questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tail lights include bulbs and wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — each assembly arrives with bulbs installed and a wiring harness for direct connection to the factory wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these compatible with a 2007 Chevy Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many 2007 Classic models but are not compatible with the 2007 Classic 3500HD; verify your exact year and submodel before buying.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MiKaFex","offers":[{"title":"Default Title","offer_id":67584846102713,"sku":"B0CLJ42NY7","price":271.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/mikafex-front-assembly-smoke-black.jpg?v=1790456278"},{"product_id":"acdelco-gold-engine-water-pump-252-845-19195104-oem-fit-gasket-kit-included","title":"ACDelco Gold Engine Water Pump 252-845 (19195104) — OEM-fit, gasket kit included","description":"\u003cstrong\u003eACDelco Gold 252-845 (19195104) is a premium aftermarket engine water pump designed to circulate coolant reliably and match OE fit, form, and function.\u003c\/strong\u003e\n\nThe ACDelco Gold water pump replaces a vehicle's worn or failing pump to help maintain proper engine temperature management by moving coolant through the engine and radiator. Built to professional standards, this pump ships with the gaskets, seals, and O-rings needed for a complete install, and is engineered for durability with heat-treated shafts and coated sealing surfaces.\n\n\u003ch3\u003eHow does this water pump improve cooling system reliability?\u003c\/h3\u003e\n\u003cp\u003eDesigned as a premium aftermarket component, the ACDelco Gold 252-845 undergoes testing to ensure leak-free operation and consistent coolant flow. Its coated seals and precision-machined housing reduce the chance of premature failure compared with lower-grade replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThorough testing for dependable, leak-resistant performance\u003c\/li\u003e\n  \u003cli\u003eCoated seals to extend seal life and resist wear\u003c\/li\u003e\n  \u003cli\u003eHeat-treated shaft assembly for improved strength under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts come with the pump and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eACDelco includes the necessary gaskets, seals, and O-rings in the package so installers have all sealing components on hand for a proper repair. That reduces rework and helps ensure a correct seal between the pump, engine case, and associated plumbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete gasket and seal kit included for trouble-free installation\u003c\/li\u003e\n  \u003cli\u003eCorrectly sized O-rings to prevent coolant leaks at mating surfaces\u003c\/li\u003e\n  \u003cli\u003eEliminates the need to source additional sealing parts separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this pump fit my vehicle and how precise is the fit?\u003c\/h3\u003e\n\u003cp\u003eThe ACDelco Gold line is made to meet OEM fit, form, and function expectations; this pump fits a broad range of GM vehicles and many non-GM applications. Verify fit using the part number 252-845 (19195104) against your vehicle's compatibility list or VIN to ensure a correct match before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to match OEM mounting points and shaft alignment\u003c\/li\u003e\n  \u003cli\u003eSuitable for GM and a wide range of non-GM vehicles\u003c\/li\u003e\n  \u003cli\u003ePart number verification reduces installation surprises\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does construction affect durability and maintenance needs?\u003c\/h3\u003e\n\u003cp\u003eDurability features like a heat-treated shaft and coated seals improve resistance to wear and reduce the likelihood of premature failure. That construction, combined with precision assembly, helps the pump maintain reliable performance across normal operating conditions, lowering the chance of unexpected cooling system repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated shaft assemblies resist bending and wear under stress\u003c\/li\u003e\n  \u003cli\u003eCoated sealing surfaces limit degradation from coolant exposure\u003c\/li\u003e\n  \u003cli\u003eQuality control testing increases confidence in long-term operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nACDelco Gold 252-845 (19195104) is aimed at professional mechanics, DIY enthusiasts, and vehicle owners seeking a high-quality replacement water pump that mirrors OEM expectations. Choose this pump if you want a ready-to-install unit with all necessary seals included, durable materials like heat-treated shafts, and a proven design suitable for GM vehicles and many non-GM applications. Always confirm fitment for your specific vehicle prior to purchase to ensure a straightforward replacement and reliable cooling system performance.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the ACDelco Gold 252-845 include gaskets and seals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pump ships with gaskets, seals, and O-rings needed for a complete installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pump compatible with non-GM vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. While designed to fit many GM models, it also fits a wide range of non-GM vehicles—verify part number fitment first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ACDelco","offers":[{"title":"Default Title","offer_id":67584846233785,"sku":"B001KSG24Y","price":335.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/acdelco-gold-252-845-front-view.jpg?v=1790456294"},{"product_id":"auxbeam-3-inch-xp-ultra-led-light-pods-pair-9600-lumen-spot-flood-ip68-waterproof-white-amber-covers","title":"Auxbeam 3-Inch XP-Ultra LED Light Pods Pair — 9600 Lumen Spot+Flood, IP68 Waterproof, White\/Amber Covers","description":"\u003cp\u003e\u003cstrong\u003eAuxbeam XP-Ultra 3-inch LED light pods are compact, high-output off-road ditch lights that deliver a 9600-lumen spot-and-flood combo for improved nighttime visibility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 3\" cube-style LED pods are built for drivers who need focused long-range illumination plus a wide-area flood for nearby hazards. With projector optics, P8 LED chips, and a combination reflector, the XP-Ultra Series balances distance and peripheral coverage while remaining small enough to mount in tight spaces on trucks, Jeeps, and utility vehicles. The pods include interchangeable white and amber covers, a plug-and-play DT harness, and an IP68-rated housing for reliable use in wet, muddy, or dusty environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these Auxbeam 3-inch LED pods and what beam pattern do they produce?\u003c\/h3\u003e\n\n\u003cp\u003eThe XP-Ultra pods produce up to 9600 lumens per pair using five high-intensity P8 LEDs and precision projector optics. Their combo reflector pairs a focused spot beam for distance with a flood pattern for close-range illumination, reducing dark gaps between light sources.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e9600 lumens total output (pair)\u003c\/li\u003e\n  \u003cli\u003e80W power per pair for efficient, intense lighting\u003c\/li\u003e\n  \u003cli\u003eSpot+flood combo reflector for long throw and wide spread\u003c\/li\u003e\n  \u003cli\u003eProjector-style optics for clean, concentrated beams\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights durable enough for off-road and all-weather use?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the housings use die-cast aluminum and impact-resistant polycarbonate lenses to resist knocks and debris on trails. An IP68 rating protects the electronics from dust and water immersion, and a rubber sealing pad prevents moisture ingress at the mount.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDie-cast aluminum frame for heat dissipation and strength\u003c\/li\u003e\n  \u003cli\u003ePC lens resists impacts and scratches\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproof and dustproof protection\u003c\/li\u003e\n  \u003cli\u003eSealed wiring points and durable mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the box?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be straightforward: the package includes a 10ft DT plug-and-play wiring harness, mounting kit, and clear instructions so you can replace older lights quickly. No extra wiring purchases are required for a typical setup, and the harness simplifies relay and switch integration.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e2 x 3-inch LED pods with white covers installed\u003c\/li\u003e\n  \u003cli\u003e2 x additional amber covers for fog or dust conditions\u003c\/li\u003e\n  \u003cli\u003e1 x 10ft DT wiring harness with plug-and-play connectors\u003c\/li\u003e\n  \u003cli\u003eFull mounting accessories and an installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I switch to the amber covers and what advantages do they offer?\u003c\/h3\u003e\n\n\u003cp\u003eAmber covers reduce glare and improve contrast in fog, rain, dust, or snowy conditions by filtering blue light that scatters back toward the driver. The interchangeable covers allow you to tailor the pods to seasonal or weather-specific needs without changing the lamps themselves.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAmber improves visibility in fog, dust, and heavy precipitation\u003c\/li\u003e\n  \u003cli\u003eWhite cover for clear-night driving and long-range visibility\u003c\/li\u003e\n  \u003cli\u003eQuick cover swap for situational adaptability\u003c\/li\u003e\n  \u003cli\u003eNo tools required to change covers in most installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Auxbeam XP-Ultra 3-inch LED cube ditch lights suit off-road enthusiasts, overlanders, and utility vehicle owners who need compact, high-output auxiliary lighting that blends long-range spotlighting with wide flood coverage. They're ideal for mounting in tight bumper or fender locations where larger light bars won't fit, and for drivers who want weatherproof, plug-and-play components with the flexibility of color covers for different conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these Auxbeam pods include a wiring harness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains a 10ft DT plug-and-play wiring harness plus mounting hardware and instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the 3-inch LED pods waterproof for off-road use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They carry an IP68 rating, protecting against dust and water immersion for rugged conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Auxbeam","offers":[{"title":"Default Title","offer_id":67584846266553,"sku":"B0CJF38XY2","price":342.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/auxbeam-front-view-cube-pod.jpg?v=1790456302"},{"product_id":"auxbeam-3-inch-xp-ultra-led-pods-9600lm-spot-beam-30-long-throw-ip68-rugged","title":"Auxbeam 3-Inch XP-Ultra LED Pods 9600LM Spot Beam — 30° Long-Throw, IP68 Rugged","description":"\u003cp\u003e\u003cstrong\u003eAuxbeam XP-Ultra 3-inch LED pods are ultra-bright, spot-focused offroad lights that deliver up to 9,600 lumens for long-distance nighttime visibility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for trucks, ATVs, UTVs and offroad rigs, the Auxbeam XP-Ultra Series combines a concentrated 30° spot beam with high-output P8 LED chips to push light far down the trail while keeping glare off your hood. These compact 3-inch cube lights include interchangeable amber and white covers, a full plug-and-play DT wiring harness, and a rugged IP68-rated housing built to withstand mud, water and vibration.\u003c\/p\u003e\n\n\u003ch3\u003eHow far does the XP-Ultra 3\" spot beam reach on dark trails?\u003c\/h3\u003e\n\n\u003cp\u003eThe narrow 30° spot beam focuses most of the 9,600 lumens into a tight pattern for long throw illumination, which helps you see obstacles and terrain details at distance. This beam shape reduces scattered glare and concentrates light downrange for higher-speed driving or extended trail visibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e30° focused spot pattern for long-distance illumination\u003c\/li\u003e\n  \u003cli\u003e9,600 total lumens from five high-intensity P8 LEDs per pod\u003c\/li\u003e\n  \u003cli\u003eDesigned to minimize hood glare and light scatter\u003c\/li\u003e\n  \u003cli\u003eImproves visual recognition of trail features at speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes these pods durable enough for offroad use?\u003c\/h3\u003e\n\n\u003cp\u003eAuxbeam engineered the XP-Ultra pods with a die-cast aluminum housing, impact-resistant polycarbonate lens and sealed rubber gaskets to keep out water and dust. The assembly is rated IP68, so it survives heavy rain, mud, and occasional submersion, plus the LEDs are specified for a long operational life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDie-cast aluminum body for heat dissipation and strength\u003c\/li\u003e\n  \u003cli\u003eImpact-resistant PC lens resists chips and cracks\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproof and dustproof sealing for harsh environments\u003c\/li\u003e\n  \u003cli\u003eRated 50,000+ hour LED lifespan under normal use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the lights easy to install and customize?\u003c\/h3\u003e\n\n\u003cp\u003eYes—these pods come as a ready-to-install kit with a 10-foot DT wiring harness, mounting hardware and simple instructions, so no extra parts are required. The interchangeable amber and white lens covers let you switch beam color quickly to match weather or legal requirements.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes 10ft DT wiring harness for plug-and-play setup\u003c\/li\u003e\n  \u003cli\u003eComplete mounting kit and step-by-step instructions included\u003c\/li\u003e\n  \u003cli\u003eTwo white covers plus two amber covers for weather adaptability\u003c\/li\u003e\n  \u003cli\u003eNo additional wiring parts or modules required for basic install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical and warranty details should I know?\u003c\/h3\u003e\n\n\u003cp\u003eEach pair of pods produces a combined output of 9,600 lumens and runs at an 80W power rating per pod assembly, requiring a compatible vehicle power source and proper fuse protection. Auxbeam backs the kit with a 24-month product warranty and offers 24-hour customer support for setup or troubleshooting.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e80W power rating per pod assembly with high-efficiency LEDs\u003c\/li\u003e\n  \u003cli\u003eIncludes two 3-inch pod lights, two white covers, wiring harness and accessories\u003c\/li\u003e\n  \u003cli\u003e24-month warranty and responsive after-sales support\u003c\/li\u003e\n  \u003cli\u003eFactory-supplied instructions reduce installation guesswork\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Auxbeam XP-Ultra 3-inch LED pods are built for offroad enthusiasts, weekend trail riders, and utility vehicle owners who need compact, high-output spot lighting for high-speed trails, search tasks, or auxiliary forward illumination. They suit anyone wanting a rugged, easy-to-install light solution with the flexibility of amber or white covers and long-term reliability in wet and dusty conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these pods come with wiring and mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a 10ft DT wiring harness, full mounting kit, and installation instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I switch between amber and white light covers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each kit includes interchangeable amber and white covers for quick color changes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Auxbeam","offers":[{"title":"Default Title","offer_id":67584846299321,"sku":"B0CJDZJRGJ","price":342.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/auxbeam-xp-ultra-front-face.jpg?v=1790456302"},{"product_id":"fill-rite-12v-20-gpm-fuel-transfer-pump-fr4204h-pump-only-cast-iron-rotary-vane","title":"Fill-Rite 12V 20 GPM Fuel Transfer Pump FR4204H (Pump-Only) — Cast Iron, Rotary Vane","description":"\u003cp\u003e\u003cstrong\u003eThe Fill-Rite FR4204H is a 12V, 20 GPM rotary-vane fuel transfer pump (pump only) built in cast iron for long-term, reliable fuel moving of gasoline, diesel, kerosene and approved blends.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompact and heavy-duty, the FR4204H is engineered for mobile fueling tasks where a robust, long-lasting pump is needed. This pump ships as a pump-only kit but includes a 1\" street elbow, a 5' 12AWG ground lead, two wire nuts and PTFE tape so you can complete a basic installation quickly. Designed for truck- or trailer-mounted fuel tanks, the unit runs on 12V battery power and uses Rotary Vane Technology to preserve steady flow rates as parts age.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pump handle different fuels and blends?\u003c\/h3\u003e\n\u003cp\u003eThe FR4204H is compatible with a wide range of common transport fuels: gasoline, diesel and kerosene as well as ethanol and methanol blends up to 15%, and biodiesel up to B20. Its materials and design accommodate these fuels without special conversions, while thermal overload protection helps guard the motor against abnormal conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with gasoline, diesel, kerosene\u003c\/li\u003e\n  \u003cli\u003eSupports ethanol\/methanol blends up to 15%\u003c\/li\u003e\n  \u003cli\u003eAccepts biodiesel blends up to B20\u003c\/li\u003e\n  \u003cli\u003eThermal overload protection reduces risk of motor overheating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect for flow and lift?\u003c\/h3\u003e\n\u003cp\u003eThe FR4204H delivers up to 20 gallons per minute and is intended for battery-powered, bung-mounted transfer. It will draw from typical tank depths and push fuel to moderate discharge heights, making it well suited for refueling rigs, fleet trucks, and mobile tanks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum flow rate: 20 GPM\u003c\/li\u003e\n  \u003cli\u003eIntake suction: effective from tank depths around 8 ft\u003c\/li\u003e\n  \u003cli\u003eDischarge capability: lifts fuel up to approximately 37 ft\u003c\/li\u003e\n  \u003cli\u003eRotary Vane Technology maintains steady flow over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features make installation and maintenance easier?\u003c\/h3\u003e\n\u003cp\u003eThe pump is built with practical installation features for tight spaces and mobile applications. A rotatable junction box, included fittings, and field-serviceable components reduce installation time and simplify wiring, while the cast-iron body stands up to demanding environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJunction box rotates 180° for easier wiring in tight areas\u003c\/li\u003e\n  \u003cli\u003eIncludes 1\" street elbow, 5' ground wire and PTFE tape\u003c\/li\u003e\n  \u003cli\u003eDurable cast-iron housing for rugged use\u003c\/li\u003e\n  \u003cli\u003eThermal overload and proven motor design for protection and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this a complete kit or a pump-only model?\u003c\/h3\u003e\n\u003cp\u003eThis listing is the pump-only FR4204H model: core pump plus a small set of installation accessories are included, but it does not come with hoses, nozzle, or in-line filters. It’s intended for buyers who need a heavy-duty pump to install into an existing or custom fuel transfer setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: pump, 1\" street elbow, 5' 12AWG ground wire, two wire nuts, PTFE tape\u003c\/li\u003e\n  \u003cli\u003eNot included: hoses, filter assemblies, nozzle, mounting bracket (if required)\u003c\/li\u003e\n  \u003cli\u003eDesigned for use with standard bung mounts and 12V battery power\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Fill-Rite FR4204H is aimed at fleet managers, contractors, farmers, and anyone needing a dependable, high-capacity 12V transfer pump for mobile fuel delivery or refueling stations. It’s best suited for users who already have or plan to install hoses and filters and want a rugged, serviceable pump built to handle mixed common fuel types and frequent use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the FR4204H run on biodiesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It supports biodiesel blends up to B20 without modification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this model include hoses and a nozzle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The FR4204H is pump-only; hoses, filters and nozzle must be purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fill-Rite","offers":[{"title":"Default Title","offer_id":67584846463161,"sku":"B00CXG3WAY","price":1037.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fill-rite-fr4204h-front-view.jpg?v=1790456301"},{"product_id":"tiezful-front-lower-control-arm-kit-for-nissan-altima-2013-2014-2pc-pre-assembled-ball-joints-direct-fit","title":"TIEZFUL Front Lower Control Arm Kit for Nissan Altima 2013-2014 — 2Pc Pre‑assembled Ball Joints, Direct-Fit","description":"\u003cstrong\u003eTIEZFUL 2Pc Control Arm Kit replaces both front lower control arms with ball joints for Nissan Altima 2013–2014, providing a direct-fit suspension repair.\u003c\/strong\u003e\n\n\u003cp\u003eIf your 2013 or 2014 Nissan Altima shows uneven tire wear, loose steering, or clunking from the front suspension, replacing worn lower control arms is a common and effective repair. This TIEZFUL two-piece kit includes driver and passenger front lower control arms with pre-assembled ball joints and is engineered to match factory mounting points for a straightforward swap.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this control arm kit match my Altima?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed specifically for Nissan Altima sedans from model years 2013 and 2014 and uses OE-style mounting geometry to align with your factory suspension. Each arm comes with the correct ball joint assemblies and corresponds to common interchange numbers used by mechanics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Nissan Altima Sedan 2013 and 2014 models\u003c\/li\u003e\n  \u003cli\u003eIncludes left and right front lower control arms with ball joints\u003c\/li\u003e\n  \u003cli\u003eInterchange references: 512-59507R, 512-59508L, 545009HP0A, 545019HP0A\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet original factory mounting dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction improve durability?\u003c\/h3\u003e\n\u003cp\u003eTIEZFUL builds these control arms from high-strength steel tubing with reinforced mounting plates, then applies a corrosion-resistant coating to extend service life. The combination reduces flex and stands up better to road stress compared with lightweight or poorly finished replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel tubing for structural rigidity\u003c\/li\u003e\n  \u003cli\u003eSolid plate mounting brackets for secure attachment points\u003c\/li\u003e\n  \u003cli\u003eRust-resistant finish to protect against corrosion\u003c\/li\u003e\n  \u003cli\u003ePre-assembled ball joints to save installation time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will installing this kit affect driving feel and safety?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn control arms restores proper wheel alignment and controls wheel movement, which reduces vibration and improves steering response. While not a replacement for alignment service, a sound control arm kit helps maintain stable handling and consistent tire contact with the road.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces road surface vibration felt through the steering\u003c\/li\u003e\n  \u003cli\u003eHelps maintain correct wheel geometry for predictable handling\u003c\/li\u003e\n  \u003cli\u003eStabilizes front suspension for improved ride comfort\u003c\/li\u003e\n  \u003cli\u003eSupports safer steering inputs under normal driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eThe control arms are built as direct-fit replacements to match factory attachment points, so installation is simpler than adapters or custom parts. Each kit contains one driver-side and one passenger-side lower control arm with the ball joint already fitted.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes two complete front lower control arms with ball joints\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design follows original factory standards for easier installation\u003c\/li\u003e\n  \u003cli\u003eCompatible with common shop procedures—bolts, bushings, and alignments as standard\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle year\/make\/model before purchase to confirm fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The TIEZFUL 2Pc Control Arm Kit is aimed at Nissan Altima 2013–2014 owners, DIY mechanics, and professional technicians replacing worn front suspension components. Choose this kit if you need a direct-fit, durable replacement for noisy, loose, or worn lower control arms and want restored steering feel and improved ride stability. Note: after installation, a professional wheel alignment is recommended to return geometry to factory specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2014 Nissan Altima sedan?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This two-piece kit is made to fit Nissan Altima sedans from 2013 and 2014; verify your exact model before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include ball joints and require alignment?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each arm comes with pre-assembled ball joints. A wheel alignment after installation is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TIEZFUL","offers":[{"title":"Default Title","offer_id":67584846528697,"sku":"B0D1VDW8KM","price":325.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tiezful-front-lower-control-arms-packaging.jpg?v=1790456297"},{"product_id":"dna-motoring-led-drl-headlights-for-07-13-chevy-silverado-1500-07-14-2500-3500-hd-chrome-clear-plug-and-play","title":"DNA MOTORING LED DRL Headlights for 07-13 Chevy Silverado 1500 \/ 07-14 2500-3500 HD — Chrome\/Clear, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eThese are a direct-fit pair of DNA MOTORING LED daytime running light (DRL) headlights built to replace the factory units on 2007–2013 Silverado 1500 and 2007–2014 Silverado 2500\/3500 HD models, offering chrome\/clear styling, LED DRL illumination, and plug‑and‑play installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as an OE-style replacement with modern LED DRL accents, this headlight pair updates the look and visibility of your Chevy Silverado without modifying factory harnesses. They combine a chrome housing and clear polycarbonate lens for a factory-fresh appearance, while using common bulb types (9005 high beam, H11 low beam, 4157NA turn signal) so you retain familiar serviceability.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my Silverado model and year?\u003c\/h3\u003e\n\u003cp\u003eThese headlights are specifically engineered for direct fitment on 2007–2013 Silverado 1500 and 2007–2014 Silverado 2500\/3500 HD trucks. They are not compatible with the 2007 Classic (old body) Silverado models. Always verify your truck’s body style and year before purchase to ensure proper alignment and mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2007–2013 Silverado 1500\u003c\/li\u003e\n  \u003cli\u003eCompatible: 2007–2014 Silverado 2500\/3500 HD\u003c\/li\u003e\n  \u003cli\u003eNot compatible: 2007 Classic (old body) models\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on replacement — no cutting or splicing required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these headlights install and what bulbs do they use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is plug‑and‑play with OEM-style connectors and mounting points, so you can swap the units into the factory positions without custom wiring. They accept common, easy-to-source bulbs: 9005 for the high beam, H11 for the low beam, and 4157NA for the turn signal, keeping maintenance straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connectors for quick swap\u003c\/li\u003e\n  \u003cli\u003eUses 9005 high beam, H11 low beam, 4157NA turn signal bulbs\u003c\/li\u003e\n  \u003cli\u003eNo modifications needed for standard configurations\u003c\/li\u003e\n  \u003cli\u003eComes as a complete driver and passenger set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features do these headlights include?\u003c\/h3\u003e\n\u003cp\u003eConstruction combines a durable ABS plastic housing with a clear polycarbonate lens to resist impact and UV degradation while preserving optical clarity. The headlight assembly is built to withstand road vibration and typical weather exposure, making it suitable for everyday use and show purposes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS plastic housing for strength and heat resistance\u003c\/li\u003e\n  \u003cli\u003ePolycarbonate lens for scratch and impact resistance\u003c\/li\u003e\n  \u003cli\u003eChrome finish for long-lasting appearance\u003c\/li\u003e\n  \u003cli\u003eQuality fitment to reduce moisture intrusion when installed correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what should I expect after purchase?\u003c\/h3\u003e\n\u003cp\u003eThe package contains a complete pair of headlights — both driver and passenger units — ready for installation. These assemblies are intended as direct replacements for worn or outdated headlights and are suitable for truck owners who want improved styling and LED DRL visibility without complex aftermarket wiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete set: driver and passenger headlight assemblies\u003c\/li\u003e\n  \u003cli\u003ePre-wired sockets for the specified bulb types\u003c\/li\u003e\n  \u003cli\u003eChrome\/clear finish for upgraded factory look\u003c\/li\u003e\n  \u003cli\u003eIdeal for show vehicles or everyday replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These DNA MOTORING headlights are aimed at Silverado owners who want a straightforward, factory‑style upgrade: drivers replacing faded or damaged stock units, enthusiasts refreshing the truck’s front-end styling with LED DRL accents, and technicians who prefer direct replacement parts that bolt in using OEM mounting points. If you have a 2007–2013 Silverado 1500 or a 2007–2014 Silverado 2500\/3500 HD (non‑Classic), this pair offers a balance of modern appearance, durable construction, and simple installation. Confirm your model year and body type before ordering to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these headlights plug-and-play or do they need wiring mods?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are plug-and-play with OEM-style connectors and direct bolt-on fitment; no wiring modifications required for standard setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which bulb types do these assemblies use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They accept 9005 for high beam, H11 for low beam, and 4157NA for the turn signal bulbs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DNA MOTORING","offers":[{"title":"Default Title","offer_id":67584848658617,"sku":"B07GP22K3B","price":327.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dna-motoring-front-view-chrome-clear-headlights.jpg?v=1790456342"},{"product_id":"rough-country-n3-dual-steering-stabilizer-for-2005-2024-ford-super-duty-twin-dampers-bolt-on-fit-8749130","title":"Rough Country N3 Dual Steering Stabilizer for 2005–2024 Ford Super Duty — Twin Dampers, Bolt-On Fit (8749130)","description":"\u003cstrong\u003eRough Country’s N3 Dual Steering Stabilizer for 2005–2024 Ford Super Duty reduces steering wobble and gives your truck firmer, more controlled handling.\u003c\/strong\u003e\n\n\u003cp\u003eBuilt specifically for Ford Super Duty models from 2005 through 2024, the Rough Country N3 Dual Steering Stabilizer (model 8749130) pairs a twin-damper setup with durable components to minimize bump steer, vibration, and wandering at highway speeds or under load. This bolt-on system boosts steering feel and protects steering components and tires, while Rough Country’s Limited Lifetime Replacement Warranty provides long-term backing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the N3 Dual Stabilizer improve driving control?\u003c\/h3\u003e\n\u003cp\u003eThe dual-damper design separates high- and low-frequency steering inputs so the system soaks up both small vibrations and larger impacts. That delivers a steadier wheel at speed and more confidence towing or carrying heavy loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo dampers tuned for different frequencies for balanced response.\u003c\/li\u003e\n  \u003cli\u003eReduces highway wander and kickback from rough surfaces.\u003c\/li\u003e\n  \u003cli\u003eLess feedback through the steering wheel during towing or off-road use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat specific durability and protection benefits will I see?\u003c\/h3\u003e\n\u003cp\u003eThe N3 protects steering linkage and related components by cutting down repeated shock and vibration, which helps extend the life of tires, ball joints, and other steering parts. Components are built to withstand daily driving, trail use, and towing stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable housings and seals resist dirt and moisture intrusion.\u003c\/li\u003e\n  \u003cli\u003eReduces wear on ball joints, tie rods, and steering gearbox.\u003c\/li\u003e\n  \u003cli\u003eHelps preserve even tire wear by limiting erratic steering movement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what’s included in the kit?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward with a bolt-on approach and clear instructions, so many owners can complete it in a few hours. The kit contains all necessary hardware and mounting components to fit Super Duty models within the specified years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete mounting brackets and grade hardware included.\u003c\/li\u003e\n  \u003cli\u003eStep-by-step install instructions supported by Rough Country.\u003c\/li\u003e\n  \u003cli\u003eNo vehicle modifications required—drilling rarely needed for stock setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the product come with warranty coverage?\u003c\/h3\u003e\n\u003cp\u003eThe N3 Dual Steering Stabilizer is covered by Rough Country’s Limited Lifetime Replacement Warranty, offering long-term reassurance against manufacturing defects. Warranty terms follow Rough Country’s standard policy—keep purchase documentation for claims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLimited Lifetime Replacement Warranty for qualifying defects.\u003c\/li\u003e\n  \u003cli\u003eRough Country customer support for installation and replacement questions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Rough Country N3 Dual Steering Stabilizer is ideal for owners of 2005–2024 Ford Super Duty trucks who want firmer steering feel, reduced bump steer, and increased longevity for steering and suspension components—especially those who tow, haul, or drive on rough roads. It’s suited to DIY installers and professional shops alike, delivering a bolt-on upgrade that balances on-road comfort with off-road resilience.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2017 Ford F-250 Super Duty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the N3 Dual Stabilizer 8749130 fits Ford Super Duty models from 2005 through 2024, including 2017 F-250s.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install it myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Many owners install it at home with basic tools; the kit includes hardware and Rough Country provides installation instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67584849608889,"sku":"B07CTVKY1V","price":365.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-front-packaging.jpg?v=1790456364"},{"product_id":"fexhull-transfer-case-shift-motor-for-gm-trucks-and-suvs-direct-fit-600-899-upgraded-gearing-oe-fit","title":"Fexhull transfer case shift motor for GM trucks and SUVs — direct-fit 600-899 (upgraded gearing, OE-fit)","description":"\u003cp\u003e\u003cstrong\u003eFexhull 600-899 transfer case motor is a direct-fit replacement that restores reliable 2WD\/4WD shifting for compatible GM trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to match original-equipment specifications, this new transfer case shift motor replaces OE numbers 600899, 19258696, 23369032 and 84109212 to deliver consistent actuation between two- and four-wheel drive. It’s engineered with upgraded internal gearing and factory-level testing so you can expect longer service life and smoother engagement under normal and demanding conditions. The unit is compatible with a wide range of Chevrolet, GMC and Cadillac models across multiple model years, offering a straightforward swap for technicians and experienced DIYers.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this Fexhull transfer case motor fit?\u003c\/h3\u003e\n\u003cp\u003eThis motor is designed for many GM full-size trucks and SUVs. Check your vehicle’s year and model against the listed fitments before purchase, and cross-reference the OE part numbers for best accuracy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCadillac Escalade ESV: 2016–2018\u003c\/li\u003e\n  \u003cli\u003eChevrolet Avalanche: 2007–2013; Silverado and Suburban variants: select 2007–2018 years\u003c\/li\u003e\n  \u003cli\u003eChevrolet Colorado and Tahoe: select 2015–2018 and 2007–2018 years\u003c\/li\u003e\n  \u003cli\u003eGMC Canyon, Sierra and Yukon\/Yukon XL: compatible with 2007–2018 ranges depending on trim\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this motor perform compared with the original equipment part?\u003c\/h3\u003e\n\u003cp\u003eFexhull manufactures this motor to meet or exceed OE tolerances and performs bench testing to ensure reliable function. The internal gear train is reinforced to reduce wear and keep the actuator shifting cleanly over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpgraded internal gearing for improved durability\u003c\/li\u003e\n  \u003cli\u003eFactory-standard tests to validate shift reliability\u003c\/li\u003e\n  \u003cli\u003e100% new components—no remanufactured cores\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and operation?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same steps as the original motor—mounting to the transfer case and reconnecting the wiring harness and fasteners. After installation, the motor should allow smooth transition between 2WD and 4WD modes when commanded by the vehicle’s transfer case controller.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design reduces modification or fabrication needs\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play electrical connector compatible with OE harnesses\u003c\/li\u003e\n  \u003cli\u003eTypical replacement task for experienced DIYers or professional shops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat reliability and service-life features does this part include?\u003c\/h3\u003e\n\u003cp\u003eManufactured by a company with decades of experience, this unit incorporates quality control practices and component upgrades aimed at increasing operational life. These improvements are intended to maintain consistent engagement even under heavier use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnhanced gear materials to resist premature wear\u003c\/li\u003e\n  \u003cli\u003eComprehensive pre-shipment testing for performance validation\u003c\/li\u003e\n  \u003cli\u003eConstructed as a new part for consistent factory-like function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Fexhull 600-899 transfer case motor is ideal for owners or technicians working on GM light-duty and heavy-duty trucks and SUVs listed in the fitment table who need a dependable, new replacement that restores transfer case shifting. Choose it if your vehicle exhibits difficulty engaging 4WD, intermittent shifting, or if diagnostics point to a faulty transfer case actuator; verify OE numbers and model years to confirm compatibility before ordering.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this motor replace OE number 600899?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Fexhull unit replaces OE 600899 and also cross-references 19258696, 23369032, and 84109212.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this transfer case motor new or remanufactured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is a 100% new replacement part with upgraded internal components for improved durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fexhull","offers":[{"title":"Default Title","offer_id":67584849805497,"sku":"B0BQM96DBN","price":265.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fexhull-front-view-transfer-case-motor.jpg?v=1790456391"},{"product_id":"scitoo-ac-compressor-for-ford-f-150-f-250-f-350-4-6l-5-4l-6-8l-with-clutch-fs10-aluminum-prefilled-pag46","title":"SCITOO AC Compressor for Ford F-150\/F-250\/F-350 4.6L 5.4L 6.8L with Clutch, FS10 Aluminum, Prefilled PAG46","description":"\u003cp\u003e\u003cstrong\u003eSCITOO AC compressor with clutch is a direct-fit replacement designed to restore strong, quiet air conditioning for selected Ford F-Series and motorhome chassis from 1999–2007.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your truck’s cabin isn’t cooling like it used to, this OEM-style compressor is built to match factory fitment and restore reliable AC performance. Constructed from aluminum alloy with a six-groove pulley and prefilled PAG46 oil (130 ml), it fits multiple Ford V8 engines including 4.6L, 5.4L and 6.8L applications and comes with the clutch installed for faster installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ford models and years will this compressor fit?\u003c\/h3\u003e\n\u003cp\u003eThis SCITOO compressor covers a wide range of Ford vehicles—primarily F-150, F-250, F-350, F-450\/F-550 Super Duty trucks and F-53 motorhome chassis across specific years. Always verify the engine size and model year against the listed fitment and OE reference numbers to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits F-150 4.6L and 5.4L (2002–2004\/2003 variations listed)\u003c\/li\u003e\n  \u003cli\u003eFits F-250\/F-350 Super Duty 5.4L and 6.8L (2002–2007 ranges)\u003c\/li\u003e\n  \u003cli\u003eIncludes select F-550 (6.8L) and F-53 motorhome chassis (1999–2019)\u003c\/li\u003e\n  \u003cli\u003eCross-references many OE numbers: 1521480, 1035108, 143033C, TEM274501, DW57167 and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this compressor built and what are the key specs?\u003c\/h3\u003e\n\u003cp\u003eSCITOO engineered this unit with an FS10 compressor design and aluminum-alloy housing for durability and weight savings. The clutch is included and the unit ships prefilled with 130 ml of PAG46 oil so you won’t need to add oil on first install—only refrigerant to the proper level.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompressor type: FS10 with integrated clutch\u003c\/li\u003e\n  \u003cli\u003eOil: PAG46, prefilled 130 ml; Pulley: 126 mm diameter, 6 grooves\u003c\/li\u003e\n  \u003cli\u003eMaterial: die-cast aluminum alloy for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eNoise: engineered for quiet operation ≤72 dB under normal load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and installation tips should I know?\u003c\/h3\u003e\n\u003cp\u003eThe compressor is designed for quick cooling response and low vibration, giving a measurable temperature drop shortly after startup when the system is charged correctly. Prior to installation, flush the AC system lines—contaminants shorten component life—then recharge refrigerant to about 70–80% of system capacity as recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExpect rapid cooling when the system is properly evacuated and charged\u003c\/li\u003e\n  \u003cli\u003eCheck system for metal shavings and debris; flush as needed before install\u003c\/li\u003e\n  \u003cli\u003eAdd refrigerant to 70–80%—do not overfill; no additional oil required on first install\u003c\/li\u003e\n  \u003cli\u003eCompare OE numbers and images to confirm exact fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this compressor work like the original part?\u003c\/h3\u003e\n\u003cp\u003eThis replacement matches key OE specifications and part numbers to replicate factory fit and function. While built to OEM-style tolerances, performance depends on a clean system and correct refrigerant charge—proper installation ensures comparable lifespan and cooling behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupplies OE cross-references for confident selection\u003c\/li\u003e\n  \u003cli\u003ePrefilled oil simplifies first-time installation steps\u003c\/li\u003e\n  \u003cli\u003eQuiet operation and minimal vibration for a comfortable cabin\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This SCITOO AC compressor is intended for owners, mechanics, and restoration shops replacing a failing compressor on Ford F-Series trucks and compatible motorhome chassis from the listed years. It’s well suited for those seeking a direct-fit, OEM-referenced replacement with prefilled oil and an included clutch—provided you confirm fitment and perform a proper system flush and refrigerant recharge before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this compressor come with oil and a clutch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It ships prefilled with 130 ml PAG46 oil and includes the clutch, so no oil addition is needed on first install.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this part fits my Ford?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your engine size, model year and OE part numbers listed to the product fitment and photos before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SCITOO","offers":[{"title":"Default Title","offer_id":67584850067641,"sku":"B0777MJ4K2","price":294.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/scitoo-front-view-ac-compressor.jpg?v=1790456391"},{"product_id":"scitoo-ac-compressor-for-honda-accord-2-4l-2008-2012-with-clutch-10sr15c-7-groove-pulley","title":"SCITOO AC Compressor for Honda Accord 2.4L 2008–2012 with Clutch, 10SR15C 7-Groove Pulley","description":"\u003cb\u003eSCITOO AC Compressor with clutch is a direct-replacement air conditioning compressor engineered to restore cooling performance in Honda Accord 2.4L (2008–2012) and compatible Crosstour models.\u003c\/b\u003e\n\n\u003cp\u003eThis high-quality aluminum-alloy compressor arrives prefilled with 130 ml of PAG46 oil and includes the clutch assembly, matching original-equipment fitment and multiple OE part numbers for straightforward installation. Built as a 10SR15C-style unit with a 7-groove, 130.5 mm pulley, it is intended to replace worn or failed compressors and bring back reliable cabin cooling without having to source separate clutch or lubricant components.\u003c\/p\u003e\n\n\u003ch3\u003eWill this compressor fit my Accord or Crosstour?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is guided by engine size and model year: this compressor is designed for Honda Accord 2.4L from 2008 through 2012 and for Crosstour 2.4L from 2012 through 2015. Confirm fitment by cross-referencing the OE numbers or visually comparing the unit to your existing compressor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrimary fitment: Honda Accord 2.4L (2008–2012)\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Honda Crosstour 2.4L (2012–2015)\u003c\/li\u003e\n  \u003cli\u003eMatches OE numbers such as 38810R40A01, 4472606960, 10347590 and others\u003c\/li\u003e\n  \u003cli\u003eCompare pulley grooves and mounting points before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key technical details I should know?\u003c\/h3\u003e\n\u003cp\u003eThe SCITOO compressor uses the 10SR15C compressor type, comes prefilled with PAG46 oil (130 ml), and features a 7-groove pulley sized at 130.5 mm. It’s constructed from aluminum alloy and includes the clutch, simplifying the replacement process.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompressor type: 10SR15C for compatible capacity and stroke\u003c\/li\u003e\n  \u003cli\u003eOil: PAG46 prefilled (130 ml) — no initial oil addition required\u003c\/li\u003e\n  \u003cli\u003ePulley: 7 grooves, 130.5 mm diameter for belt alignment\u003c\/li\u003e\n  \u003cli\u003eMaterial: lightweight aluminum alloy with included clutch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and first-time setup work?\u003c\/h3\u003e\n\u003cp\u003eInstallation mirrors OEM service steps: remove the old compressor, clean the A\/C circuit thoroughly, mount the new compressor, and recharge the system with refrigerant. The unit ships with oil already inside, so only refrigerant is needed; the manufacturer recommends charging to about 70–80% of full capacity rather than overfilling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect and flush A\/C lines to remove debris or metal shavings\u003c\/li\u003e\n  \u003cli\u003eInstall compressor and torque mounting bolts to vehicle specs\u003c\/li\u003e\n  \u003cli\u003eAdd refrigerant to roughly 70–80% of system capacity — do not overfill\u003c\/li\u003e\n  \u003cli\u003eTest for proper clutch engagement, cooling, and abnormal noise\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis compressor is built for rapid cooling and low operating noise, engineered to reach comfortable cabin temperatures quickly while running at or below 72 dB in normal conditions. Proper system maintenance and a clean cooling circuit significantly extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast temperature drop after startup for quicker cabin comfort\u003c\/li\u003e\n  \u003cli\u003eOperates quietly (≤72 dB) with minimal vibration\u003c\/li\u003e\n  \u003cli\u003ePrefilled oil minimizes initial handling and contamination risk\u003c\/li\u003e\n  \u003cli\u003eCleaner system and correct refrigerant charge maximize longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this compressor for? If you own a 2008–2012 Honda Accord 2.4L or a 2012–2015 Crosstour 2.4L with a failing or noisy A\/C compressor, this SCITOO unit provides a budget-friendly, complete replacement including clutch and oil. It's aimed at DIY installers and professional technicians who want an OE-style fitment and clear compatibility via listed part numbers. Before purchase, verify year\/make\/model, compare the existing compressor visually, and follow recommended system-cleaning and refrigerant-charge practices to ensure reliable operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is oil included in the SCITOO compressor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the compressor comes prefilled with 130 ml of PAG46 oil, so no initial oil addition is needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this compressor in my 2009 Honda Accord 2.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this unit fits Honda Accord 2.4L model years 2008–2012; verify OE numbers and pulley configuration before installing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SCITOO","offers":[{"title":"Default Title","offer_id":67584850952377,"sku":"B0BS9HR649","price":332.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/scitoo-ac-compressor-front-view.jpg?v=1790456424"},{"product_id":"torchbeam-front-wheel-hub-bearing-assembly-pair-515097-rwd-for-chevy-gmc-triple-seal-corrosion-resistant","title":"Torchbeam Front Wheel Hub Bearing Assembly Pair 515097 RWD for Chevy GMC — Triple-Seal, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eTorchbeam Pair 515097 RWD front wheel hub bearing assemblies are a direct-fit replacement designed to restore smooth, quiet front-wheel operation on compatible Chevrolet, GMC and Cadillac RWD models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis pair of front hub bearing assemblies (part 515097, also referenced as WE61576\/7300020\/QHUB56) replaces worn or noisy hubs on a range of 2007–2014 full-size GM trucks and SUVs. Built from high-grade steels with a corrosion-resistant finish and improved sealing, these hubs aim to meet OE fit and function while offering a two-year warranty and responsive customer support. The information below explains fitment, construction, installation considerations, and who benefits most from choosing this replacement unit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these Torchbeam hubs fit?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are engineered for rear-wheel-drive full-size GM pickup and SUV platforms from model years 2007–2014. Always verify your vehicle’s Year\/Make\/Model\/Drive before purchase to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet Silverado 1500 RWD (2007–2013)\u003c\/li\u003e\n  \u003cli\u003eChevrolet Tahoe \u0026amp; Suburban 1507–2014 RWD; Avalanche 2007–2013\u003c\/li\u003e\n  \u003cli\u003eGMC Sierra 1500 RWD and Yukon\/Yukon XL 1500 RWD (2007–2014)\u003c\/li\u003e\n  \u003cli\u003eCadillac Escalade \u0026amp; Escalade ESV RWD (2007–2014)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these hub bearings built and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eThe Torchbeam hubs combine a #55 carbon structural steel outer ring and flange with a GCr15 high-carbon chromium inner bearing ring for durability and consistent hardness. The assemblies include improved seals and a triple oil-seal configuration to reduce contamination and extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOuter ring and flange: #55 carbon structural steel for strength\u003c\/li\u003e\n  \u003cli\u003eInner ring: GCr15 high-carbon chrome bearing steel for uniform hardness\u003c\/li\u003e\n  \u003cli\u003eTriple oil seal and enhanced sealing to limit moisture and debris ingress\u003c\/li\u003e\n  \u003cli\u003eRust- and corrosion-resistant surface finish for longer lifespan\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and installation benefits can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe hubs are designed to deliver quieter operation, reduced vibration, and a straightforward bolt-on installation when matched to the correct vehicle. They ship as a pair with studs and are intended to match OE mounting patterns and torque requirements, simplifying replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTriple-seal design minimizes noise and contamination for smoother operation\u003c\/li\u003e\n  \u003cli\u003eIncludes studs—reduces parts sourcing during replacement\u003c\/li\u003e\n  \u003cli\u003eOE-quality fit to preserve wheel alignment and ABS sensor function (when applicable)\u003c\/li\u003e\n  \u003cli\u003eBacked by a 2-year Torchbeam warranty and customer support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these hubs meet OE specifications and what warranty is offered?\u003c\/h3\u003e\n\u003cp\u003eTorchbeam manufactures these assemblies to meet OE fit and performance expectations; the product references common OE numbers (515097, WE61576, 7300020, QHUB56) for cross-checking. Each purchase includes a two-year warranty and access to Torchbeam customer service for fitment or warranty questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-references to OE numbers for easy verification\u003c\/li\u003e\n  \u003cli\u003e2-year limited warranty from Torchbeam\u003c\/li\u003e\n  \u003cli\u003e24-hour customer support for compatibility or product questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Torchbeam pair of front wheel hub bearing assemblies is aimed at owners and independent technicians working on 2007–2014 RWD Chevrolet, GMC and Cadillac full-size trucks and SUVs who need a direct-fit replacement to eliminate hub noise, play, or vibration. It’s ideal for drivers who prefer an OE-style component with reinforced sealing and corrosion protection, and for shops that value parts backed by a clear warranty and accessible support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm these hubs fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use the vehicle menu to select Year, Make, Model and click Confirm; cross-check OE numbers 515097, WE61576, 7300020, QHUB56.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers these Torchbeam hub assemblies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Torchbeam provides a 2-year limited warranty and 24-hour customer support for fitment or product issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Torchbeam","offers":[{"title":"Default Title","offer_id":67584851017913,"sku":"B0D9NSVW78","price":294.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/torchbeam-front-hub-assembly-front-view.jpg?v=1790456426"},{"product_id":"a-karck-2-5-exhaust-resonator-pair-2-5-inlet-outlet-11-5-polished-stainless-straight-through-tone-control","title":"A-KARCK 2.5\" Exhaust Resonator Pair — 2.5\" Inlet\/Outlet, 11.5\" Polished Stainless, Straight-Through Tone Control","description":"\u003cb\u003eA-KARCK 2.5\" inlet and outlet stainless steel resonator reduces rasp and delivers a deeper, cleaner exhaust tone while preserving high flow.\u003c\/b\u003e\n\n\u003cp\u003eIf you're tuning your exhaust for sound and performance without adding restrictive mufflers, this A-KARCK resonator pair offers a compact, straight-through design to reduce harsh frequencies and mellow the overall note. Constructed from polished stainless steel with 2.5\" inner diameters and an 11.5\" overall length, these resonators are made to fit common mid-pipe or axle-back applications where space and flow matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this resonator change my exhaust sound?\u003c\/h3\u003e\n\u003cp\u003eThe resonator targets and reduces high-frequency rasp and drone while keeping a full low-end tone. Because it's a straight-through unit, it doesn't choke flow; instead it smooths the harmonics that cause harshness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoftens raspy mid-range frequencies for a more pleasant cruising sound\u003c\/li\u003e\n  \u003cli\u003eProduces a deeper, throatier exhaust note without excessive volume\u003c\/li\u003e\n  \u003cli\u003eMaintains exhaust flow so horsepower impact is minimal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my 2.5\" exhaust system and how is it installed?\u003c\/h3\u003e\n\u003cp\u003eYes — both inlet and outlet measure 2.5\" inner diameter and the overall body length is 11.5\", so it fits most 2.5\" piping runs with room to clamp or weld. Installation is straightforward for anyone familiar with basic exhaust work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.5\" inner diameter inlet and outlet for direct slip-fit or clamp installation\u003c\/li\u003e\n  \u003cli\u003e4\" round body width fits common underbody clearances\u003c\/li\u003e\n  \u003cli\u003eCan be welded or secured with exhaust clamps for a leak-free connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction details matter for durability?\u003c\/h3\u003e\n\u003cp\u003eThese resonators are made from polished stainless steel, offering corrosion resistance and a clean finish that holds up to road exposure. The straight-through bore and welded seams are engineered for a balance of longevity and acoustic performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePolished stainless steel resists rust for longer service life\u003c\/li\u003e\n  \u003cli\u003eStraight-through internal design minimizes clogging and backpressure\u003c\/li\u003e\n  \u003cli\u003eWelded construction ensures structural integrity under thermal cycling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I expect performance loss or backpressure increase?\u003c\/h3\u003e\n\u003cp\u003eNo significant performance loss should occur because the unit is straight-through and matches the pipe diameter. It is designed to preserve flow while targeting unwanted sound frequencies rather than restricting exhaust gases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.5\" bore preserves unrestricted exhaust flow\u003c\/li\u003e\n  \u003cli\u003eStraight-through path avoids choke points that cause backpressure\u003c\/li\u003e\n  \u003cli\u003eIdeal for those who want sound control without sacrificing efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The A-KARCK 2.5\" resonator 2-pack is aimed at enthusiasts and mechanics who want to refine exhaust tone on 2.5\" systems — especially mid-pipe or axle-back setups where rasp or drone are issues but maintaining flow is important. It suits DIY installers, professional shops, and anyone swapping components on street, track, or light-duty performance vehicles seeking a durable, compact solution for cleaner sound.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this resonator fit a 2.5\" exhaust pipe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Both inlet and outlet are 2.5\" inner diameter and designed for slip-fit or clamp installation on 2.5\" systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it reduce exhaust flow or power?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No significant flow loss; the straight-through design preserves exhaust flow while reducing harsh frequencies.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-KARCK","offers":[{"title":"Default Title","offer_id":67584851083449,"sku":"B0CB13M24C","price":179.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-karck-front-view-polished-resonator.jpg?v=1790456426"},{"product_id":"yinlowa-2-piece-clutch-actuator-kit-ae8z-7c604-a-for-dps6-ford-fiesta-focus-oem-fit-metal-housings","title":"Yinlowa 2-piece clutch actuator kit AE8Z-7C604-A for DPS6 Ford Fiesta \u0026 Focus — OEM-fit metal housings","description":"\u003cp\u003e\u003cstrong\u003eYinlowa 2PCS AE8Z-7C604-A is a direct-fit clutch actuator kit (A and B) designed to restore smooth DPS6 PowerShift automatic shifting on compatible Ford Fiesta and Focus models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement set contains both upper (Clutch A) and lower (Clutch B) actuator units engineered to match OEM fit and function for the 6-speed DPS6 automatic transmission. Built with precision DC motors and metal housings, the pair addresses common electronic clutch faults and helps return consistent engagement timing and shift quality. Check vehicle years and engine sizes against the fitment list before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ford models and years does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis Yinlowa kit fits Ford Fiesta and Ford Focus vehicles equipped with the 6-speed DPS6 PowerShift transmission. Verify engine displacement and model year for compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord Fiesta: 2011–2019 with 1.0L or 1.6L engines\u003c\/li\u003e\n  \u003cli\u003eFord Focus: 2012–2018 with 2.0L engines\u003c\/li\u003e\n  \u003cli\u003eMatches OEM part numbers AE8Z-7C604-A, AE8Z7C604A and equivalents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing both actuators (A \u0026amp; B) help transmission performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing both clutch actuators together ensures synchronized clutch response and avoids uneven wear or mismatched timing that can occur when only one actuator is replaced. A matched pair helps prevent recurring faults and stabilizes gear transitions across the full shift range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsures consistent engagement timing between clutch packs\u003c\/li\u003e\n  \u003cli\u003eReduces chances of shuddering and harsh engagements\u003c\/li\u003e\n  \u003cli\u003eHelps prevent premature failure from imbalance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat problems can this actuator kit resolve?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed to address a range of DPS6 transmission symptoms related to faulty clutch actuators. It targets electronic and mechanical causes tied to clutch actuation rather than unrelated drivetrain failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlow or delayed shifting and poor shift quality\u003c\/li\u003e\n  \u003cli\u003eSevere shuddering or judder during engagement\u003c\/li\u003e\n  \u003cli\u003eClutch slipping, harsh engagement, and relevant fault codes (e.g., P0902, P0805, P087A)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat build quality and warranty support does Yinlowa provide?\u003c\/h3\u003e\n\u003cp\u003eThe actuators are manufactured to meet OEM specifications, using durable metal components and precision DC motors rated for under-hood temperatures and repeated cycling. Yinlowa offers a one-year warranty and customer support to help confirm fitment and troubleshoot issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-style construction and electrical connectors\u003c\/li\u003e\n  \u003cli\u003eDesigned for continuous mechanical cycling and high-temperature environments\u003c\/li\u003e\n  \u003cli\u003e1-year limited warranty and dedicated support team\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 2-piece Yinlowa clutch actuator kit is aimed at owners or technicians working on 2011–2019 Ford Fiesta and 2012–2018 Ford Focus vehicles with the DPS6 PowerShift transmission who are experiencing shifting faults, diagnostic clutch codes, or inconsistent engagement. It’s also suitable for fleet maintenance shops that prefer replacing both actuators simultaneously to ensure balanced operation and minimize repeat repairs. Always confirm the original part number and vehicle specifications prior to purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit clear transmission fault codes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replacing the actuators can resolve actuator-related codes, but clear codes with a scanner and verify no other faults remain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace both actuators at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Replacing both A and B together promotes synchronized performance and reduces repeat failures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67584851181753,"sku":"B0C9Q3CLZP","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-view-actuator-pair.jpg?v=1790456427"},{"product_id":"ngk-laser-iridium-spark-plugs-pack-of-6-silzkr7b11-0-044-pre-gapped-oem-fit-for-3-3-3-8l-3-6l-v6","title":"NGK Laser Iridium Spark Plugs Pack of 6 — SILZKR7B11 0.044\" Pre-Gapped, OEM Fit for 3.3–3.8L \u0026 3.6L V6","description":"\u003cp\u003e\u003cstrong\u003eNGK SILZKR7B11 (part 9723) Laser Iridium spark plugs are a six-pack of OEM-quality ignition components designed to deliver consistent starting, dependable combustion, and long service life for compatible 6-cylinder engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese NGK iridium plugs are engineered to meet or exceed original equipment specifications for fit and performance. Built with premium materials and precision manufacturing, they’re a common factory or aftermarket replacement for a range of Chrysler, Dodge, Jeep, Hyundai, Kia, and Ram 3.3–3.8L and 3.6L V6 engines. The pack includes six pre-gapped plugs for convenience; confirm the 0.044\" gap and vehicle compatibility before installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these spark plugs affect everyday drivability?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn or mismatched spark plugs with NGK Laser Iridium units helps restore reliable ignition and smoother engine operation. Improved ignitability supports steady combustion across normal driving conditions, which can translate to more consistent throttle response.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-gapped at 0.044\" for the listed applications (verify before installation)\u003c\/li\u003e\n  \u003cli\u003eLaser-welded iridium tip for stable spark delivery\u003c\/li\u003e\n  \u003cli\u003eReduced misfire risk compared to degraded plugs\u003c\/li\u003e\n  \u003cli\u003eDesigned for sustained performance over long service intervals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes NGK Laser Iridium different from conventional plugs?\u003c\/h3\u003e\n\u003cp\u003eIridium combines a very hard, high-melting-point alloy at the center electrode, allowing a finer electrode and more concentrated spark. That design supports reliable ignition with lower required voltage and greater longevity versus standard nickel tips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFine iridium center electrode for precise spark focus\u003c\/li\u003e\n  \u003cli\u003eDurable materials that resist wear and fouling\u003c\/li\u003e\n  \u003cli\u003eTrivalent metal plating on threads to resist corrosion\u003c\/li\u003e\n  \u003cli\u003eManufactured to OE-equivalent specifications for fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these plugs compatible with my vehicle and service intervals?\u003c\/h3\u003e\n\u003cp\u003eThis NGK 9723 pack is specified for many 3.3L–3.8L and 3.6L V6 engines from Chrysler, Dodge, Jeep, Hyundai, Kia, and Ram—often matching OE spark plug recommendations. Typical manufacturer service intervals listed for these applications range from about 96,000 to 105,000 miles; always check your owner’s manual for the exact schedule.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon OE-equivalent fit for 2010–2024 model-year V6 applications listed by manufacturer\u003c\/li\u003e\n  \u003cli\u003eRecommended OE service intervals generally between 96k–105k miles for these engines\u003c\/li\u003e\n  \u003cli\u003eVerify engine size and model-year compatibility before purchase\u003c\/li\u003e\n  \u003cli\u003eConfirm the 0.044\" gap and re-gap if necessary during install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know before installing these NGK spark plugs?\u003c\/h3\u003e\n\u003cp\u003eAlthough the plugs are pre-gapped, verify the gap and torque to the vehicle manufacturer’s specifications. Use anti-seize only if recommended for your application, and install with proper torque to avoid thread damage or poor sealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways check and adjust the 0.044\" gap if required by your engine\u003c\/li\u003e\n  \u003cli\u003eTighten to the torque specified by the vehicle maker—do not overtighten\u003c\/li\u003e\n  \u003cli\u003eReplace in matched sets for multi-cylinder engines to maintain balance\u003c\/li\u003e\n  \u003cli\u003eInspect ignition boots, wires, or coils while replacing plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Professional technicians and DIY enthusiasts who need a reliable, OE-grade replacement set for compatible 6-cylinder engines. Choose this NGK 6-pack if you want an iridium-tipped, corrosion-resistant spark plug built for long intervals and consistent ignition in the specific Chrysler, Dodge, Jeep, Hyundai, Kia, and Ram models listed. Confirm vehicle fitment and service recommendations before ordering.\u003c\/p\u003e\n\n\u003cdiv\u003e\n  \u003cul\u003e\n    \u003cli\u003eTRUSTED OEM BRAND: NGK supplies ignition parts to many domestic and import manufacturers.\u003c\/li\u003e\n    \u003cli\u003eCONSISTENT IGNITION PERFORMANCE: Designed for dependable starts and steady combustion.\u003c\/li\u003e\n    \u003cli\u003eADVANCED ELECTRODE DESIGN: Iridium center electrode supports efficient spark and durability.\u003c\/li\u003e\n    \u003cli\u003eCORROSION-RESISTANT PLATING: Trivalent plating helps protect threads and ease removal.\u003c\/li\u003e\n    \u003cli\u003eDIRECT REPLACEMENT FIT: Manufactured to meet OE specifications—verify compatibility before purchase.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these NGK plugs come pre-gapped?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they’re pre-set to 0.044\" for the listed applications, but always verify and adjust to your vehicle specs before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these plugs the original equipment for my V6 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They meet OE-equivalent specifications for many 3.3–3.8L and 3.6L V6 engines listed; check your vehicle’s part number for exact fitment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":67584851345593,"sku":"B07PFWMTQ8","price":166.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ngk-packaging-front-spark-plugs.jpg?v=1790456445"},{"product_id":"ksp-performance-adjustable-torsion-key-set-for-silverado-sierra-2500hd-3500hd-2020-2026-1-3-front-lift-forged-steel","title":"KSP PERFORMANCE Adjustable Torsion Key Set for Silverado\/Sierra 2500HD 3500HD 2020-2026 — 1-3\" Front Lift, Forged Steel","description":"\u003cp\u003e\u003cstrong\u003eKSP's adjustable torsion key set lifts the front of 2020–2026 Chevy Silverado 2500HD and GMC Sierra 2500HD\/3500HD trucks by 1–3 inches for a level stance and clearance for larger tires.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis forged torsion key kit from KSP PERFORMANCE is engineered specifically for 4WD Silverado and Sierra 2500\/3500 trucks (2020–2026) to raise and level the front without cutting or complex frame work. Designed with 3D-scanned vehicle fitment, corrosion-resistant finishes, and aluminum pads, the kit preserves factory ride characteristics while creating the clearance needed for bigger wheels and an improved presence.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this torsion key set change my truck's stance and tire fitment?\u003c\/h3\u003e\n\u003cp\u003eBy relocating the torsion bar anchor, the adjustable keys increase front ride height between 1 and 3 inches, which corrects rake and allows larger-diameter tires without stressing factory suspension geometry. The system keeps the factory arms and shocks in place, offering a straightforward height change.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront lift: adjustable from 1\" up to 3\" depending on key positioning\u003c\/li\u003e\n  \u003cli\u003eMakes room for larger tires while keeping factory components\u003c\/li\u003e\n  \u003cli\u003eHelps create a level front-to-rear stance for even tire wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and manufacturing methods ensure durability?\u003c\/h3\u003e\n\u003cp\u003eKSP forges the torsion keys from high-strength steel and applies a black powder coat to resist corrosion and chipping. The included pads are CNC-machined from 6061-T6 aluminum with natural oxidation for a durable, non-rusting seating surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged steel keys for increased tensile strength\u003c\/li\u003e\n  \u003cli\u003eBlack powder coating for improved weather resistance\u003c\/li\u003e\n  \u003cli\u003e6061-T6 aluminum pads offering solid, long-lasting contact points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what vehicle models are compatible?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed for DIY or professional shops and typically takes a couple of hours; no cutting of the vehicle is required. The set fits 4WD Chevrolet Silverado 2500HD\/3500HD and GMC Sierra 2500HD\/3500HD produced from 2020 through 2026, but excludes trucks equipped with Magnetic Ride Control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated install time: roughly 2 hours for a competent DIYer\u003c\/li\u003e\n  \u003cli\u003eNo frame cutting or permanent vehicle modification necessary\u003c\/li\u003e\n  \u003cli\u003eCompatibility: 2020–2026 Chevy Silverado \u0026amp; GMC Sierra 2500HD\/3500HD 4WD (no Magnetic Ride Control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does KSP's warranty and support cover?\u003c\/h3\u003e\n\u003cp\u003eKSP PERFORMANCE provides a customer support promise that includes a 30-day refund window and a 12-month replacement policy to address manufacturing defects or fitment issues. Their support line is available if you encounter problems during installation or need product assistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30-day refund option if the kit isn't right for your truck\u003c\/li\u003e\n  \u003cli\u003e12-month replacement for defective components\u003c\/li\u003e\n  \u003cli\u003eCustomer support for fitment and installation questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The KSP 1–3\" adjustable torsion key set is aimed at owners of 2020–2026 Chevy Silverado 2500HD and GMC Sierra 2500HD\/3500HD 4WD trucks who want a straightforward, reversible way to level their truck front end and fit larger tires without replacing factory suspension arms. It's a smart choice for pickup owners who value OEM-style ride quality, need added tire clearance, and prefer a bolt-on solution that can be installed in a few hours by a knowledgeable DIYer or a professional technician.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2021 Silverado 2500HD with stock suspension?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—fits 2020–2026 Silverado 2500HD 4WD models with stock suspension; not compatible with Magnetic Ride Control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the kit myself and how long does it take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A competent DIYer can typically install it in about two hours; professional installation is recommended if you lack tools or experience.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584851509433,"sku":"B0D4CXSDZ2","price":243.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-torsion-key-front-packed-kit.jpg?v=1790456447"},{"product_id":"sealight-9005-hb3-h11-h8-h9-led-headlight-bulbs-pack-of-4-6500k-140-000lm-active-fan-cooling","title":"SEALIGHT 9005\/HB3 H11\/H8\/H9 LED Headlight Bulbs Pack of 4 — 6500K 140,000LM, Active Fan Cooling","description":"\u003cp\u003e\u003cstrong\u003eSEALIGHT high-output 9005\/HB3 H11\/H8\/H9 LED bulbs deliver a focused, ultra-bright 6500K beam with plug-and-play fitment and long-life cooling for safer night driving.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese SEALIGHT replacement LED headlight bulbs are engineered as a direct upgrade for vehicles that use 9005\/HB3 or H11\/H8\/H9 bulbs. Designed to match the factory filament position, they produce a crisp cutoff to reduce glare, a wide pool of white light for improved visibility, and a compact driver assembly for simple installation. Built-in cooling and a smart driver help maintain stable output and high compatibility with modern vehicle electronics.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these bulbs avoid blinding oncoming traffic?\u003c\/h3\u003e\n\u003cp\u003eThe LEDs use a super-slim copper substrate placed to replicate the stock filament location, creating a pronounced cutoff line similar to OEM halogens. That focused pattern reduces stray light while directing illumination where drivers need it most.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e0.05-inch copper board replicates factory bulb position for accurate beam focus\u003c\/li\u003e\n  \u003cli\u003eSharp cutoff reduces glare for oncoming drivers\u003c\/li\u003e\n  \u003cli\u003e6500K color temperature for clear road contrast without scattering light\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much brighter are these compared with standard halogen bulbs?\u003c\/h3\u003e\n\u003cp\u003eSEALIGHT LEDs claim a substantial increase in luminous output versus stock halogens, producing a broader, more intense field of view in cool white light. This helps remove dark spots at the road edges and improves recognition of obstacles and signage at night.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated up to 140,000LM per pair (combined output) for significantly stronger illumination\u003c\/li\u003e\n  \u003cli\u003e6500K cool white color enhances contrast and clarity\u003c\/li\u003e\n  \u003cli\u003eDesigned to light wider lanes and deeper distances than OEM halogen units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs work reliably and last long?\u003c\/h3\u003e\n\u003cp\u003eThe kit combines active fan cooling with a single copper heat tube to keep temperatures down and protect LED longevity. With a robust driver and durable thermal path, the lights are built to operate steadily for many years under normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed silent cooling fan plus copper heat tube for effective heat dissipation\u003c\/li\u003e\n  \u003cli\u003eEstimated service life around 70,000 hours under typical conditions\u003c\/li\u003e\n  \u003cli\u003eSmart IC helps prevent flicker, radio interference, and dash errors in most vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult or will I need extra parts?\u003c\/h3\u003e\n\u003cp\u003eSEALIGHT designed these bulbs to be a near-identical 1:1 size match to factory halogens so they fit into existing housings without modification. The plug-and-play, non-polarity connectors and compact driver make for a straightforward swap that most owners can complete quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1:1 subsize form factor fits many factory sockets without changes\u003c\/li\u003e\n  \u003cli\u003eNon-polarity wiring removes the need to test orientation\u003c\/li\u003e\n  \u003cli\u003eMost installations complete in under 3 minutes per side with basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a high-visibility, road-focused LED upgrade without altering headlamp housings or wiring. If you’re replacing aging halogens and want a bright, crisp 6500K beam with long life and wide vehicle compatibility, this SEALIGHT pack of four is suited to daily commuters, night-shift drivers, and anyone who prefers a plug-and-play improvement to their factory lighting. Note: always verify bulb compatibility for your specific vehicle model and consult local vehicle lighting regulations before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these bulbs fit my car's 9005 or H11 socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are 1:1 subsize and designed for 9005\/HB3 and H11\/H8\/H9 sockets, but confirm your vehicle's bulb type before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an external CANbus adapter to prevent errors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles will not need an adapter thanks to the built-in smart IC, but some cars may still require a decoder for error-free operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SEALIGHT","offers":[{"title":"Default Title","offer_id":67584851542201,"sku":"B0F3JJ6499","price":167.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/sealight-front-packaging-9005-hb3-h11-h8-h9.jpg?v=1790456447"},{"product_id":"evil-energy-fuel-injection-hose-5-16-sae-30r9-25-ft-300-psi-fkm-inner-for-ethanol-diesel-resistance","title":"EVIL ENERGY fuel injection hose 5\/16\" SAE 30R9 — 25 ft, 300 PSI FKM inner for ethanol \u0026 diesel resistance","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 5\/16\" SAE 30R9 fuel injection hose is a 25-foot, high-temperature, 300 PSI-rated FKM\/ECO hose engineered for modern fuel systems including ethanol blends and diesel.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis fuel injection line is built to the SAE J30R9 specification for reliable service in high-pressure fuel systems, LS swaps, fuel pumps, filters, tanks and vapor management. With a fluorine rubber inner tube and epichlorohydrin cover reinforced by aramid fiber, the hose balances chemical resistance and abrasion protection while remaining flexible across a wide temperature range. It’s designed to accept common fuel types such as gasoline, E10–E85, biodiesel and diesel without premature degradation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose handle different fuels and ethanol blends?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses an FKM (fluorine rubber) inner compound that resists swelling and softening when exposed to modern oxygenated fuels. ECO cover material and aramid fiber reinforcement add durability against external wear and pressure cycling. Together, these materials let the hose work with gasoline, E10–E85, biodiesel and diesel safely within rated limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFKM inner tube for strong chemical resistance to ethanol and biodiesel\u003c\/li\u003e\n  \u003cli\u003eCompatible with E10, E15, E85, diesel and conventional gasoline\u003c\/li\u003e\n  \u003cli\u003eAramid fiber reinforcement for higher burst and fatigue strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pressure and temperature ranges can I expect?\u003c\/h3\u003e\n\u003cp\u003eThis 5\/16\" hose is rated for 300 PSI working pressure with a 1200 PSI burst pressure, providing a large safety margin for fuel injection systems. Temperature capability ranges from -40°F up to 275°F in continuous service, with short-term tolerance to about 302°F. Those parameters make it suitable for under-hood installations and proximity to hot engine components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 300 PSI; burst: 1200 PSI\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40°F to 275°F (short-term 302°F)\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius: 2.52 inches (64 mm) for routing in tight spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hose fit my system and how is it sized?\u003c\/h3\u003e\n\u003cp\u003eThe hose has a 5\/16 inch (approx. 8 mm) inner diameter with a 0.55 inch (14 mm) outside diameter and manufacturing tolerances accounted for. It comes as a 25-foot length to allow multiple runs or custom cut-to-length installations. The SAE J30R9 construction means it is backward-compatible with many 30R7 and 30R6 applications often found on modern vehicles and swaps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eID: 5\/16\" (8 mm) with ±0.4 mm tolerance\u003c\/li\u003e\n  \u003cli\u003eOD: 0.55\" (14 mm) with ±0.5 mm tolerance; length: 25 ft\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet SAE J30R9 and compatible with 30R7\/30R6 systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: EVIL ENERGY’s 5\/16\" SAE 30R9 hose is aimed at mechanics, performance builders and DIY enthusiasts needing a durable, ethanol-compatible fuel line for fuel injection systems, LS engine swaps, fuel pumps, filters and vapor or return lines. It suits both everyday street cars and higher-demand setups where chemical resistance, temperature tolerance and pressure reliability matter. If you need a long run of premium-rated hose to cut and install to exact lengths or to carry multiple feeds, this 25-foot roll offers flexibility and industry-standard performance without compromising on material quality.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with E85 and biodiesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The FKM inner and ECO cover are formulated to resist ethanol blends (including E85) and biodiesel within the listed temperature and pressure limits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut this 25ft hose to length and use clamps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hose is supplied on a 25-foot roll for custom cutting and works with standard fuel hose clamps and fittings rated for SAE J30R9 service.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584851771577,"sku":"B0BJJ58D47","price":175.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-fuel-hose.jpg?v=1790456474"},{"product_id":"youbison-52in-devils-eye-led-display-for-trucks-rvs-programmable-144-16-pixel-app-remote","title":"YOUBISON 52in Devil's Eye LED Display for Trucks \u0026 RVs — Programmable 144×16 Pixel, App + Remote","description":"\u003cp\u003e\u003cstrong\u003eYOUBISON’s 52in x 7.48in Devil's Eye Light is a flexible, high-resolution programmable LED display that creates animated devil-eye graphics, custom text, GIFs and music-synced effects for trucks, RVs and event setups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ultra-thin LED panel blends high brightness, app-based customization and weatherproof durability so you can add a dramatic visual element to vehicles, trailers, storefronts and party installations. With a 144×16 pixel array (2,304 LEDs), IP65 protection, Bluetooth app plus remote control, and a long USB cable for versatile power options, the unit is designed to deliver crisp animation, quick installation and ongoing creative updates.\u003c\/p\u003e\n\n\u003ch3\u003eHow vivid and visible will the display be on the road?\u003c\/h3\u003e\n\u003cp\u003eThe 144×16 resolution and high-brightness LEDs ensure clear, recognizable animations and text even in daylight. The panel’s LED density and brightness balance legibility with eye-catching motion for both close-up viewers and passing traffic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2,304 LEDs across a 52in × 7.48in flexible panel\u003c\/li\u003e\n  \u003cli\u003eDesigned for daytime visibility and nighttime impact\u003c\/li\u003e\n  \u003cli\u003eMilitary-grade, shatterproof LEDs for long-term brightness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I control the animations, text and custom graphics?\u003c\/h3\u003e\n\u003cp\u003eYou can program the display using the included handheld remote or the YOUBISON mobile app on iOS and Android. The app supports live text, scrolling messages, GIF uploads, devil-eye presets and music synchronization, plus 13 language options for global users.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time editing via Bluetooth app for instant changes\u003c\/li\u003e\n  \u003cli\u003eRemote control for quick mode switching while parked\u003c\/li\u003e\n  \u003cli\u003eUpload images\/GIFs and sync animations to audio\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation and mounting so fast and safe?\u003c\/h3\u003e\n\u003cp\u003eThe panel is ultra-thin and flexible—just peel and stick using the heavy-duty adhesive tape included. It conforms to curved surfaces, requires no drilling or wiring for most vehicle installs, and removes cleanly without residue when repositioned or replaced.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e0.2mm flexible display molds to bumpers, grills and tailgates\u003c\/li\u003e\n  \u003cli\u003eHigh-strength adhesive for secure, tool-free mounting\u003c\/li\u003e\n  \u003cli\u003e13ft USB cable for powering from car adapters, power banks or USB supplies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the display survive weather, heat and cold?\u003c\/h3\u003e\n\u003cp\u003eYes—YOUBISON built this panel for outdoor use. It carries an IP65 coating to repel rain and a wide operating temperature range rated from -22°F to 185°F, so it tolerates daily driving conditions and seasonal exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65 water-resistance coating for rain protection\u003c\/li\u003e\n  \u003cli\u003eWide temperature tolerance for hot and cold climates\u003c\/li\u003e\n  \u003cli\u003eDurable construction with shatterproof LED components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: drivers, show cars, RV owners, small business promoters, event planners and content creators who want an easy, high-impact visual upgrade. If you need a flexible, bright LED strip that adds animated branding, custom messages or themed lighting to vehicles or displays—without permanent modification—this YOUBISON Devil's Eye Light provides a portable, programmable solution with long-term firmware support and regular content updates.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I upload my own GIFs and images?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the YOUBISON app supports GIF and image uploads for custom animations and graphics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I power the LED panel in a vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use the included 13ft USB cable with a car USB adapter, power bank or standard USB power source.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOUBISON","offers":[{"title":"Default Title","offer_id":67584851706041,"sku":"B0FR22XSKC","price":175.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/youbison-devil-eye-front-view.jpg?v=1790456474"},{"product_id":"kax-front-wheel-hub-bearing-assembly-pair-515096-fit-for-chevy-tahoe-suburban-front-abs-tone-ring-6-stud","title":"KAX Front Wheel Hub Bearing Assembly Pair 515096 — Fit for Chevy Tahoe\/Suburban, Front ABS Tone Ring, 6-Stud","description":"\u003cp\u003e\u003cstrong\u003eThe KAX 515096 front wheel hub bearing assembly is a direct-fit replacement that restores smooth wheel rotation and secures the front wheel for compatible Chevy, GMC and Cadillac models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis wheel hub assembly is engineered as a complete front-left or front-right unit with integrated ABS tone ring and mounting flange, designed to replace worn or noisy hubs on 2007–2014 full-size GM trucks and SUVs. Built with sealed bearings, coated wheel bolts and precise splines, the KAX 515096 aims to reduce vibration, maintain alignment of the wheel relative to the knuckle and simplify reinstallation during routine suspension work.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this KAX hub assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThe 515096 hub is made to match a range of full-size GM models from the late 2000s to mid-2010s. It covers both 4WD\/AWD and some AWD variants, but fit depends on specific year and drivetrain options. Always confirm fitment using your vehicle's year, make and model before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Chevrolet Silverado 1500 (2007–2013) 4WD\u003c\/li\u003e\n  \u003cli\u003eFits Chevy Tahoe and Suburban 1500 (2007–2014) 4WD\u003c\/li\u003e\n  \u003cli\u003eAlso fits GMC Sierra\/Yukon and Cadillac Escalade models listed for 2007–2014\u003c\/li\u003e\n  \u003cli\u003eIncludes ABS-equipped applications with 6 wheel studs and a 3-hole flange pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this hub improve driving feel and safety?\u003c\/h3\u003e\n\u003cp\u003eReplacing a degraded hub assembly with the KAX 515096 removes excess play and uneven rotation that cause vibration, tire wear and noisy bearings. The sealed bearing and precision manufacture help keep contaminants out and maintain steady wheel support under load. While not a safety device by itself, a solid hub helps the braking and steering systems perform as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed bearing design reduces contamination and extends service life\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined flange and splines ensure correct wheel alignment\u003c\/li\u003e\n  \u003cli\u003eCoated fasteners make future removal easier and resist corrosion\u003c\/li\u003e\n  \u003cli\u003eIntegrated ABS tone ring preserves wheel-speed sensor function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical details I should check before ordering?\u003c\/h3\u003e\n\u003cp\u003eKey specifications to confirm include hub position, wheel stud count, ABS compatibility and flange bolt pattern. The KAX 515096 is a front-position assembly with six studs and an ABS encoder; verify these match your existing unit. Cross-reference the listed reference numbers if needed to match OE or aftermarket part catalogs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePosition: Front; ABS tone ring included\u003c\/li\u003e\n  \u003cli\u003eWheel studs: 6; Flange bolt holes: 3\u003c\/li\u003e\n  \u003cli\u003eReference numbers available for cross-checking compatibility\u003c\/li\u003e\n  \u003cli\u003eDesigned as a complete hub assembly for straightforward replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes with the hub and what maintenance should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe assembly arrives as a ready-to-install hub with bearing, splines and protective seals already fitted, plus treated wheel bolts to ease reassembly. Routine inspection of wheel bearings and seals is recommended after high-mileage use or heavy towing; replace if you notice noise, looseness or excessive play.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes bearing, retainer and sealing components preinstalled\u003c\/li\u003e\n  \u003cli\u003eWheel bolts supplied with protective coating for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eEngineered to minimize noise and vibration when installed correctly\u003c\/li\u003e\n  \u003cli\u003eSimple swap for mechanics familiar with front hub replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: The KAX 515096 hub assembly is intended for owners and technicians working on late-2000s to early-2010s Chevrolet, GMC and Cadillac full-size trucks and SUVs that need a reliable, sealed front hub replacement. It's a practical choice for anyone repairing worn bearings, addressing ABS sensor issues tied to a failing tone ring, or restoring proper wheel support after years of service or heavy duty use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the KAX 515096 include ABS functionality?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This assembly includes an integrated ABS tone ring compatible with factory wheel-speed sensors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this hub myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A competent DIYer with proper tools can install it, but follow torque specs and safety steps or consult a mechanic.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KAX","offers":[{"title":"Default Title","offer_id":67584851869881,"sku":"B09MKC1249","price":278.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kax-515096-front-hub-front-view.jpg?v=1790456475"},{"product_id":"evil-energy-3-8-fuel-injection-hose-25ft-sae-j30r9-300-psi-fkm-inner-aramid-reinforced","title":"EVIL ENERGY 3\/8 Fuel Injection Hose 25FT SAE J30R9 — 300 PSI, FKM Inner \u0026 Aramid Reinforced","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 3\/8\" fuel injection hose is a 25-foot SAE J30R9-rated line built with an FKM inner, ECO cover and aramid reinforcement for 300psi working pressure and broad fuel compatibility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premium fuel line is engineered for modern fuel-injection systems and demanding under-hood environments. It combines fluorine-rubber inner tubing with an epichlorohydrin cover and aramid fiber reinforcement to deliver chemical resistance, heat tolerance, and a high burst rating. The hose meets SAE J30R9 requirements and supports common fuels including gasoline, ethanol blends, biodiesel, and diesel — making it suitable for performance builds, replacements, and conversions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose perform under pressure and heat?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY 3\/8\" hose is rated for 300 psi continuous working pressure with a 1200 psi burst pressure, providing a wide safety margin for fuel-injection and pump-driven systems. Its materials allow operation across a broad temperature window and intermittent exposure to higher temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 300 psi for reliable continuous operation.\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 1200 psi for emergency safety margin.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40°F to 275°F regular use, intermittent to 302°F.\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius: 2.99 inches (76 mm) for compact routing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fuels and applications is it compatible with?\u003c\/h3\u003e\n\u003cp\u003eConstructed with an FKM inner tube, this hose resists degradation from a wide variety of fuels and additives. It is designed for fuel injection lines but also works well for fuel filters, tanks, pumps, LS swaps, and related plumbing where SAE 30R9 performance is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with gasoline, ethanol blends (E10, E15, E85), biodiesel, and diesel.\u003c\/li\u003e\n  \u003cli\u003eSuitable for fuel injection systems, fuel pumps, filters, and tank lines.\u003c\/li\u003e\n  \u003cli\u003eAccepts use in vapor emission and oil-cooling pathways where SAE R9 specs apply.\u003c\/li\u003e\n  \u003cli\u003eWorks with other SAE 30R6 and 30R7 applications when higher chemical resistance is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the hose dimensions and installation considerations?\u003c\/h3\u003e\n\u003cp\u003eThe line ships as a continuous 25-foot length with a nominal inside diameter of 3\/8\" (9.5 mm) and an outside diameter near 0.63\" (16 mm). Tolerances are included to assist fitment; measure fittings and clamps carefully for secure, leak-free connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInside diameter: 3\/8\" (9.5 mm), tolerance ±0.4 mm.\u003c\/li\u003e\n  \u003cli\u003eOutside diameter: 0.63\" (16 mm), tolerance ±0.5 mm.\u003c\/li\u003e\n  \u003cli\u003eLength: 25 feet of continuous hose for multiple runs or cutting to size.\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius: 2.99\" (76 mm) to avoid kinks or flow restriction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose SAE J30R9 construction for a fuel-injection project?\u003c\/h3\u003e\n\u003cp\u003eSAE J30R9 is a widely accepted specification for fuel-injection lines that demand higher heat and chemical resistance than generic hoses. Choosing an R9-rated hose reduces the risk of premature swelling, hardening, or failure when exposed to modern fuel blends and elevated engine-compartment temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets and exceeds SAE J30R9 standards for fuel-injection service.\u003c\/li\u003e\n  \u003cli\u003eFKM inner tube improves resistance to alcohols and aggressive fuels.\u003c\/li\u003e\n  \u003cli\u003eAramid fiber reinforcement delivers improved burst and abrasion resilience.\u003c\/li\u003e\n  \u003cli\u003eECO cover offers durable external protection against heat and ozone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Installers, tuners, and DIY mechanics who need a durable, fuel-compatible hose for performance engines, LS swaps, or replacements in modern fuel systems will appreciate this EVIL ENERGY 3\/8\" SAE 30R9 line. It’s aimed at anyone who requires a long continuous length (25 ft) with proven material performance and clear dimensional specs for dependable routing and secure connections.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for E85 and ethanol blends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The FKM inner tube is compatible with E85, E10, E15 and other ethanol blends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this hose for high-temperature engine compartments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Rated for -40°F to 275°F regular use and intermittent exposure up to 302°F.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584851837113,"sku":"B0BJJB3W6J","price":179.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-3-8-fuel-hose.jpg?v=1790456473"},{"product_id":"vevor-8-kw-diesel-air-heater-12v-remote-lcd-control-low-fuel-use-for-trucks-rvs-boats","title":"VEVOR 8 kW Diesel Air Heater 12V — Remote \u0026 LCD Control, Low Fuel Use for Trucks RVs Boats","description":"\u003cstrong\u003eVEVOR's 8 kW diesel air heater is a compact 12V heating unit that warms vehicle cabins, preheats engines, and clears frost using low fuel consumption and remote\/LCD controls.\u003c\/strong\u003e\n\n\u003cp\u003eCold starts and frozen windows are common problems in winter travel—this VEVOR diesel air heater is designed to deliver fast, efficient cabin heat for trucks, motorhomes, vans, boats, and buses. It runs on diesel, draws modest electricity from a 12V system, and combines a durable aluminum combustion chamber with a quiet fuel pump for steady warmth and minimal disturbance.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will the heater warm my vehicle and clear frost?\u003c\/h3\u003e\n\u003cp\u003eThe heater is built to raise cabin temperature rapidly by channeling cool intake air across a hot combustion chamber. In many installations it can noticeably warm the interior and defrost windows within about 10 minutes, depending on vehicle size and insulation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8 kW heat output suitable for medium to large cabins\u003c\/li\u003e\n  \u003cli\u003eAluminum combustion chamber for fast, even heat transfer\u003c\/li\u003e\n  \u003cli\u003eTypical warm-up time around 10 minutes in standard vans\u003c\/li\u003e\n  \u003cli\u003eAlso usable to preheat engines and speed up defrosting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the fuel and power demands, and how quiet is it?\u003c\/h3\u003e\n\u003cp\u003eThe unit runs on diesel and operates from a 12V electrical supply. Fuel consumption is low—about 0.048–0.10 gallons per hour—so it can provide overnight warmth using roughly one gallon. The integrated oil pump minimizes vibration and noise so the heater can run without creating a distracting hum.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel use: 0.048–0.10 Gal\/H (0.18–0.36 L\/H)\u003c\/li\u003e\n  \u003cli\u003eRated voltage: 12V, compatible with vehicle electrical systems\u003c\/li\u003e\n  \u003cli\u003eLow-vibration fuel pump reduces operational noise\u003c\/li\u003e\n  \u003cli\u003eEfficient combustion for extended runtime on limited fuel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I control the heater and plan warm-up times?\u003c\/h3\u003e\n\u003cp\u003eVEVOR equips the heater with both a clear LCD switch and an infrared remote so you can operate the unit from inside or a distance. The wireless remote reaches up to about 98 ft (30 m), and the timer function lets you schedule preheating so the cabin is warm before you enter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLCD panel for direct, on-device adjustments\u003c\/li\u003e\n  \u003cli\u003eRemote control with ~30 m (98 ft) range for convenient operation\u003c\/li\u003e\n  \u003cli\u003eTemperature range adjustable between 8°C–36°C (46.4°F–96.8°F)\u003c\/li\u003e\n  \u003cli\u003eBuilt-in timer to preheat cabin and engine before departure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and environments is this heater suitable for?\u003c\/h3\u003e\n\u003cp\u003eThis diesel air heater is intended for diesel-powered vehicles and compact living spaces where 12V power is available. Common installations include trucks, motorhomes, campervans, buses, and boats; it’s also a good fit for overnight stays, remote job sites, and any situation needing reliable supplemental heat without grid power.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with diesel cars, trucks, RVs, caravans, buses, and boats\u003c\/li\u003e\n  \u003cli\u003eOperates across a broad working temperature range (-40°C to +50°C)\u003c\/li\u003e\n  \u003cli\u003eCompact design fits engine bays, under bunks, or in storage compartments\u003c\/li\u003e\n  \u003cli\u003eUseful for travel, camping, and professional vehicle use in cold climates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The VEVOR 8 kW diesel air heater is aimed at drivers and owners of diesel vehicles who need dependable, fast cabin heating and frost management without relying on shore power. It suits professional drivers, full-time RVers, boat owners, and anyone who spends time in cold climates and wants a low-fuel, programmable heating solution that integrates with a 12V system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this heater run on a standard 12V vehicle battery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; it’s designed for 12V systems. Ensure battery capacity and alternator can handle start-up and continuous draw during operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much diesel will it use overnight?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typical consumption is 0.048–0.10 gallons per hour, so roughly one gallon can run the heater most of a night at moderate settings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VEVOR","offers":[{"title":"Default Title","offer_id":67584853442745,"sku":"B0DFP519B7","price":255.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vevor-8kw-heater-front-view.jpg?v=1790456498"},{"product_id":"nilight-12-inch-300w-led-light-bar-kit-with-2-4-inch-60w-pods-dual-color-amber-white-6-modes-wiring-harness","title":"Nilight 12-inch 300W LED Light Bar Kit with 2×4-inch 60W Pods — Dual-Color Amber\/White, 6 Modes \u0026 Wiring Harness","description":"\u003cp\u003e\u003cstrong\u003eNilight's 12-inch 300W LED light bar with two 4-inch 60W light pods delivers selectable amber and white illumination with six strobe\/mode options and a wiring-harness kit for fast install.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete off-road lighting kit combines a slim 12\" dual-color beam bar and two compact pods with a reinforced 16AWG wiring harness so you can add warning, work, or auxiliary driving light to trucks, ATVs, SUVs, or utility vehicles. The set features synchronized mode control (white, amber, combinations, and strobe patterns) plus a memory function that returns to the last chosen mode. Built with corrosion-resistant 6063 aluminum, IP67 sealing, and upgraded reflectors, the assembly balances high output, cooling, and durable outdoor use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the six-mode system and memory function simplify operation?\u003c\/h3\u003e\n\u003cp\u003eThe light pack offers six selectable lighting states — pure white, pure amber, white + amber, and three strobe variations — all switchable from the included harness. A memory feature saves the last used mode so the lights return to that setting after power cycles, reducing repetitive switching during frequent use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix modes: white, amber, combined, white strobe, amber strobe, combined strobe\u003c\/li\u003e\n  \u003cli\u003eMemory function: retains last mode after power off\/on\u003c\/li\u003e\n  \u003cli\u003eWiring harness with a three-lead connector for simple control and install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat beam pattern and light quality should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses upgraded reflector cups and multi-angle refraction to create a combo beam: focused center throw for long-range visibility plus wide spill for peripheral illumination. High-power LEDs in both amber and white channels produce distinct colors optimized for visibility and warning use without flicker or unstable current.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCombo beam: focused center + wide spread\u003c\/li\u003e\n  \u003cli\u003eDual-color LEDs: separate amber and white chips for versatility\u003c\/li\u003e\n  \u003cli\u003eUpgraded reflectors for consistent output and reduced dark spots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weatherproof is the Nilight kit for off-road use?\u003c\/h3\u003e\n\u003cp\u003eHoused in a 6063 aluminum profile with thermal grease, the light bar dissipates heat efficiently to extend LED life under sustained output. Sealed with waterproof glue and rated IP67, the lights resist water immersion, dust ingress, and vibration from rough terrain for reliable field performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6063 aluminum housing with thermal grease for improved cooling\u003c\/li\u003e\n  \u003cli\u003eIP67-rated waterproof and dustproof construction\u003c\/li\u003e\n  \u003cli\u003eSliding, sturdy mounting brackets to lock the bar in place on uneven trails\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the wiring harness and installation include?\u003c\/h3\u003e\n\u003cp\u003eThe package includes a Nilight-upgraded 16AWG wiring harness with three leads for integrated control of amber and white channels plus strobe modes. The harness simplifies connection to a vehicle battery and fuse\/relay circuit, reducing installation time for most users with basic wiring experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16AWG wiring harness with relay, fuse, and switch-ready leads\u003c\/li\u003e\n  \u003cli\u003eThree-conductor interface to control color channels and modes\u003c\/li\u003e\n  \u003cli\u003eMounting hardware and sliding brackets for adjustable placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers, fleet operators, and outdoor enthusiasts who need a compact, multi-function auxiliary lighting solution that combines color-selectable warning output with usable white light for work and trail use. It suits those who want an easy-to-install kit with durable materials, synchronized color control across multiple lights, and a memory function to avoid repetitive setup. Avoid using as primary vehicle headlights; use as supplemental or dedicated warning\/work lighting only.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit come with everything needed to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package includes the 12\" bar, two 4\" pods, a 16AWG wiring harness with relay and fuse, mounting brackets, and hardware for standard installs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I run amber and white together or separately?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can run amber, white, or both simultaneously. Modes include solid and strobe options, and the last selected mode is saved by the memory function.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Nilight","offers":[{"title":"Default Title","offer_id":67584853344441,"sku":"B09WD9WT6H","price":193.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/nilight-12in-300w-front-view.jpg?v=1790456497"},{"product_id":"uplus-new-technology-battery-12v-14ah-auxiliary-battery-aux14-up-group-400-agm-200-cca-compact-sealed","title":"UPLUS NEW TECHNOLOGY BATTERY 12V 14Ah Auxiliary Battery AUX14-UP Group 400 AGM 200 CCA Compact Sealed","description":"\u003cp\u003e\u003cstrong\u003eThe UPLUS AUX14-UP is a compact 12V 14Ah AGM auxiliary battery designed to deliver reliable backup and supplementary power for vehicles that need extra starting or accessory support.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe UPLUS AUX14-UP auxiliary battery offers a maintenance-free, sealed design that combines high cold-cranking ability with vibration resistance and long cycle life. Built with 99.99% pure primary lead and AGM technology, this Group 400-format unit is intended for use as a secondary source of power — ideal for vehicles with winches, audio systems, dual-battery setups, or as a standby starter boost when the main battery is strained.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this battery help when a vehicle has extra electrical load?\u003c\/h3\u003e\n\u003cp\u003eThe AUX14-UP supplements your vehicle’s main battery by supplying additional current to accessories and starter circuits without compromising the primary battery. It reduces strain on the main battery during repeated starts or when high-draw devices are in use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12V 14Ah capacity for accessory and auxiliary tasks.\u003c\/li\u003e\n  \u003cli\u003e200 CCA (Cold Cranking Amps) assists reliable starts in cold conditions.\u003c\/li\u003e\n  \u003cli\u003eAGM, sealed construction prevents leaks and allows flexible mounting.\u003c\/li\u003e\n  \u003cli\u003eCompact Group 400 size fits tight spaces and common auxiliary trays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this battery durable and safe in rough conditions?\u003c\/h3\u003e\n\u003cp\u003eUPLUS constructs the AUX14-UP using high-purity lead and absorbed glass mat technology, improving charge acceptance and minimizing gas release. The assembly is reinforced for vibration resistance and tested to withstand low-temperature starts down to -30°C.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e99.99% pure primary lead for consistent performance and charging.\u003c\/li\u003e\n  \u003cli\u003eAGM design reduces electrolyte movement and leak risk.\u003c\/li\u003e\n  \u003cli\u003eEnhanced vibration tolerance for off-road and heavy-duty use.\u003c\/li\u003e\n  \u003cli\u003eStrong low-temperature starting capability for cold climates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the AUX14-UP to install and maintain?\u003c\/h3\u003e\n\u003cp\u003eThe AUX14-UP is maintenance-free and ship-sealed, so there’s no topping up of fluids or regular servicing needed. Its small footprint (5.91\" × 3.43\" × 5.71\") and modest weight (9.91 lbs) make it straightforward to mount in secondary battery compartments or custom trim panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintenance-free AGM eliminates routine electrolyte checks.\u003c\/li\u003e\n  \u003cli\u003ePolarity marked [+,-] for simple, correct connections.\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions fit common auxiliary battery trays and enclosures.\u003c\/li\u003e\n  \u003cli\u003eLightweight design eases handling and installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the battery?\u003c\/h3\u003e\n\u003cp\u003eUPLUS provides local after-sales support backed by a 36-month warranty and a 60-day refund window. This combination lets buyers verify fit and function and access assistance if any early issues arise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e36 months warranty for peace of mind and parts support.\u003c\/li\u003e\n  \u003cli\u003e60-day refund window for compatibility checks.\u003c\/li\u003e\n  \u003cli\u003eLocal support network for troubleshooting and RMA processing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The UPLUS AUX14-UP suits drivers and installers who need a dependable secondary battery for accessory-heavy vehicles, dual-battery systems, emergency starter backup, or compact off-road builds. It’s a good option for RVers, overlanders, audio enthusiasts, and fleet vehicles that demand a sealed, maintenance-free auxiliary power source with solid cold-start performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the AUX14-UP maintenance-free?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The UPLUS AUX14-UP uses AGM sealed construction, so no electrolyte topping up or regular maintenance is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this battery start my car in cold weather?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It has 200 CCA and improved low-temperature starting ability, designed to assist starts even in cold conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"UPLUS NEW TECHNOLOGY BATTERY","offers":[{"title":"Default Title","offer_id":67584853475513,"sku":"B0G8F6VM28","price":248.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/uplus-aux14-up-front-packaging.jpg?v=1790456495"},{"product_id":"r1-concepts-front-brake-kit-for-2015-2019-nissan-micra-10-2-mill-balanced-rotors-ceramic-pads","title":"R1 Concepts Front Brake Kit for 2015–2019 Nissan Micra — 10.2\" Mill-Balanced Rotors \u0026 Ceramic Pads","description":"\u003cp\u003e\u003cstrong\u003eR1 Concepts Front Brake Kit is a direct-fit replacement package with two 10.2\" mill-balanced rotors and four ceramic pads engineered for 2015–2019 Nissan Micra and compatible Versa\/Versa Note models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace worn front braking components with a ready-to-install kit designed to match OEM dimensions and restore confident stopping. This kit pairs blank, G3000-grade iron rotors that are mill-balanced for vibration-free operation with low-dust ceramic pads that prioritize quiet everyday driving. The set ships complete for a front axle replacement and carries a one-year manufacturer coverage for defects.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit improve everyday braking performance?\u003c\/h3\u003e\n\u003cp\u003eThe combination of precision-balanced rotors and ceramic pads reduces pedal pulsation and unwanted noise while improving contact consistency. Mill-balanced blanks help prevent vibration that can come from older or warped rotors, and the ceramic formulation minimizes dust buildup on wheels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10.2\" front rotor diameter matched to listed vehicle fits\u003c\/li\u003e\n  \u003cli\u003eG3000 iron grade for strength and heat stability\u003c\/li\u003e\n  \u003cli\u003eMill-balanced machining reduces vibration and pulsation\u003c\/li\u003e\n  \u003cli\u003eCeramic pads deliver quieter stops and lower wheel dust\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my Nissan Micra or Versa model without modification?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit is built to OEM-style specifications for direct fitment on the listed vehicles, so no custom modifications are required when installed correctly. Always verify vehicle details before ordering to ensure compatibility with trim, year, and brake configurations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: Nissan Micra 2015–2019\u003c\/li\u003e\n  \u003cli\u003eAlso fits various Nissan Versa and Versa Note model years listed in product details\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design uses factory mounting points and hardware alignment\u003c\/li\u003e\n  \u003cli\u003eConfirm exact fitment using vehicle lookup or VIN before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included in the front brake kit and what are its specifications?\u003c\/h3\u003e\n\u003cp\u003eThe package contains two R1 Concepts eLINE blank rotors and four ceramic brake pads, sized for the front axle. The rotors are 10.2 inches in diameter, machined for balance and finished to resist corrosion until installed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: (2) front blank rotors and (4) ceramic brake pads\u003c\/li\u003e\n  \u003cli\u003eRotor diameter: 10.2 inches (front)\u003c\/li\u003e\n  \u003cli\u003eMaterial: G3000-grade cast iron rotors for durability\u003c\/li\u003e\n  \u003cli\u003ePad type: low-dust ceramic formulation for daily use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and warranty coverage?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with front brake service; it’s a direct replacement without the need for machining or adapters. The manufacturer provides a one-year limited coverage for defects, but normal wear items like pads are subject to use and driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit installation to factory mounting points\u003c\/li\u003e\n  \u003cli\u003eNo rotor modification required for proper fit\u003c\/li\u003e\n  \u003cli\u003e1-year warranty against manufacturing defects\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs and bedding procedures for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers of 2015–2019 Nissan Micra owners and those with compatible Nissan Versa or Versa Note models who want a dependable, OEM-style front brake replacement. It suits daily commuters and owners seeking lower dust and noise without stepping up to high-performance rotor patterns or specialty pads. Verify vehicle fitment before purchasing to ensure correct compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit a 2017 Nissan Micra?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This R1 Concepts front brake kit is specified to fit Nissan Micra models from 2015 through 2019.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the pads included low-dust?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes ceramic pads formulated to produce less dust and reduce wheel cleaning frequency.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"R1 Concepts","offers":[{"title":"Default Title","offer_id":67584853377209,"sku":"B016XARHYC","price":248.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/r1-concepts-front-brake-kit-packaging.jpg?v=1790456496"},{"product_id":"yaberauto-6000a-portable-car-jump-starter-ap04-with-obd2-scanner-16-800mah-power-bank-600-lumen-light","title":"YaberAuto 6000A Portable Car Jump Starter AP04 with OBD2 Scanner — 16,800mAh Power Bank \u0026 600‑Lumen Light","description":"\u003cp\u003e\u003cstrong\u003eThe YaberAuto AP04 is an all-in-one 6000A portable jump starter that also functions as an OBD2 engine code reader, battery tester and 16,800mAh power bank for roadside emergencies.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompact yet rugged, the AP04 pairs high cold-cranking power with on-device diagnostics so you can restart a dead battery, check engine-related fault codes and monitor battery health without phones or apps. Built for drivers who want fast, reliable self-service on the road, this unit supports a wide range of vehicles, delivers multiple safety protections, and includes a bright 600-lumen emergency light for nighttime use.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this jump starter revive my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe AP04 delivers 6000A peak current and a FORCE START feature designed to start completely drained batteries even in extreme temperatures. Its heavy-duty clamps and robust internal circuitry prioritize fast, reliable cranking while minimizing sparking and heat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6000A peak output suitable for cars, trucks, motorcycles, boats and lawn equipment\u003c\/li\u003e\n  \u003cli\u003eOperates from -4°F to 140°F for cold and hot weather reliability\u003c\/li\u003e\n  \u003cli\u003eV0-rated fireproof materials and 10 built-in safety protections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat diagnostic functions can I run with the OBD2 scanner?\u003c\/h3\u003e\n\u003cp\u003eThe integrated OBD2 tool provides nine engine-related diagnostic features on a bright 3.3-inch screen, helping you see trouble codes and basic live data before visiting a repair shop. It focuses on engine-system faults and supplies code definitions to speed troubleshooting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRead and erase engine fault codes and view DTC lookup definitions\u003c\/li\u003e\n  \u003cli\u003eI\/M readiness, freeze frame, live data stream and onboard monitoring\u003c\/li\u003e\n  \u003cli\u003eO2 sensor and evaporative system tests plus VIN display\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I monitor my battery and use the unit as a charger?\u003c\/h3\u003e\n\u003cp\u003eYes — the AP04 offers real-time battery health monitoring with a voltage curve display so you can determine when a battery needs attention. It also doubles as a 16,800mAh power bank with an 18W USB output for charging phones and accessories.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBattery voltage monitoring and graph display; starts vehicles under 12V\u003c\/li\u003e\n  \u003cli\u003e16,800mAh internal battery provides multiple device charges\u003c\/li\u003e\n  \u003cli\u003e18W USB output for fast charging of phones, tablets and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the AP04 easy to use and compatible with my car?\u003c\/h3\u003e\n\u003cp\u003eDesigned for straightforward, app-free operation, the device works with most OBD2 vehicles: US models from 1996 onward, many European models from 2000 onward and Asian models after 2008. Its clear color screen, multi-language interface and plug-and-play OBD2 cable make it accessible to beginners and experienced drivers alike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play OBD2 scanner; no app or network needed\u003c\/li\u003e\n  \u003cli\u003e3.3-inch color display with intuitive menus and 15 language options\u003c\/li\u003e\n  \u003cli\u003eIncludes heavy-duty clamps, detachable OBD2 cable and carrying bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The YaberAuto AP04 is made for drivers who want a single compact tool that covers emergency starts, on-the-spot engine diagnostics and device charging. It suits weekend mechanics, daily commuters, fleet operators and anyone who values self-sufficiency on the road. If you frequently travel alone, work in remote locations, or maintain multiple vehicles, the AP04 provides a practical combination of starting power, diagnostic insight and portable lighting in one carryable unit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the AP04 start my car with a completely dead battery?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The AP04 offers 6000A peak and a FORCE START feature to crank fully drained batteries in most cars and light trucks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the OBD2 scanner require a phone or app to work?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The AP04’s OBD2 scanner is plug-and-play and shows diagnostics directly on its built-in color screen without apps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YaberAuto","offers":[{"title":"Default Title","offer_id":67584853541049,"sku":"B0GX97NFVZ","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yaberauto-ap04-front-view.jpg?v=1790456495"},{"product_id":"orion-motor-tech-12v-diesel-transfer-pump-kit-portable-12-gpm-fuel-pump-with-nozzle-carry-case","title":"Orion Motor Tech 12V Diesel Transfer Pump Kit — Portable 12 GPM Fuel Pump with Nozzle \u0026 Carry Case","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's OMT Diesel Transfer Pump Kit is a ready-to-use, portable 12V fuel transfer system that moves diesel and similar low-viscosity oils up to 12 gallons per minute.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit bundles a 1\/5 hp 12V electric pump, manual nozzle, hoses, fittings, and a rugged carry case so you can transfer diesel quickly and reliably without searching for extra parts. Built with a powder-coated cast iron pump body and an aluminum-alloy nozzle, the assembly balances durability with portability for jobs ranging from topping off boats to refilling equipment in the field.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit simplify refueling boats, generators, and equipment?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives pre-assembled with the main components and common fittings included, so you can start fuel transfer right away. The compact carry case keeps everything organized and protects components from damage during transport.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes pump, nozzle, inlet\/outlet hoses, clamps, and electrical leads\u003c\/li\u003e\n  \u003cli\u003e12 gpm maximum flow handles quick fill-ups\u003c\/li\u003e\n  \u003cli\u003eErgonomic case makes storage and transport straightforward\u003c\/li\u003e\n  \u003cli\u003eClear instructions reduce setup time and user error\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat control does the manual nozzle provide during transfer?\u003c\/h3\u003e\n\u003cp\u003eThe aluminum-alloy manual nozzle has an adjustable lever that lets you set or vary flow smoothly, or lock it open for continuous pumping. That control helps prevent overflows and enables precise fills into smaller tanks or awkwardly placed inlets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVariable flow with lever for fine adjustment\u003c\/li\u003e\n  \u003cli\u003eLock feature for uninterrupted transfer operations\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists wear from frequent use\u003c\/li\u003e\n  \u003cli\u003eSmoother handling reduces spillage risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fluids and lift capabilities can I expect from the pump?\u003c\/h3\u003e\n\u003cp\u003eThe 1\/5 hp 12V pump is designed for low-viscosity liquids such as diesel, kerosene, and similar oils. It can achieve a maximum flow of about 12 gallons per minute and supports lifts up to the kit's specified maximum, making it suitable for siphoning from barrels or tanks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBest suited for diesel, kerosene, and light oils\u003c\/li\u003e\n  \u003cli\u003eUp to approximately 12 gallons per minute flow rate\u003c\/li\u003e\n  \u003cli\u003eCapable of handling typical suction lifts for portable refueling\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard hose fittings for easy hookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable is the OMT Diesel Transfer Pump Kit?\u003c\/h3\u003e\n\u003cp\u003eKey pump components use corrosion-resistant finishes and sturdy alloys to endure outdoor use and repeated handling. Replacement parts and common fittings are standard sizes, making maintenance and repairs straightforward when needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePowder-coated cast iron pump housing for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eAluminum-alloy nozzle for impact and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStandard hose diameters and clamps for easy replacement\u003c\/li\u003e\n  \u003cli\u003eCarrying case protects components between uses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Orion Motor Tech OMT Diesel Transfer Pump Kit is aimed at boat owners, small fleet operators, landscapers, farmers, and DIYers who need a portable, all-in-one solution for moving diesel and other light oils. It’s practical for anyone who values fast fill times, simple control over flow, and durable hardware that travels to the job site.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this pump transfer diesel from a drum or barrel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes hoses and fittings suitable for drum or barrel refilling and supports typical suction lifts for portable transfer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the nozzle lockable for continuous flow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The aluminum manual nozzle features a lockable lever to maintain continuous transfer without holding the trigger.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584854294713,"sku":"B0D5B5SDWP","price":282.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-omt-pump-front-view.jpg?v=1790456542"},{"product_id":"yllshengyu-engine-transmission-mount-kit-for-2013-2017-honda-accord-2-4l-automatic-5-piece-oe-fit-vibration-dampening","title":"Yllshengyu Engine \u0026 Transmission Mount Kit for 2013–2017 Honda Accord 2.4L Automatic — 5-Piece OE-Fit, Vibration-Dampening","description":"\u003cp\u003e\u003cstrong\u003eYllshengyu’s five-piece engine and transmission mount kit replaces all factory mounts on 2013–2017 Honda Accord L4 2.4L automatic models to restore stability and reduce vibration.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your 2013–2017 Honda Accord with the 2.4L engine and automatic transmission shows engine movement, unusual vibration, or drivetrain noise, worn mounts are a common culprit. This kit from Yllshengyu includes the front, front-right, rear, and both left transmission mounts so you can replace the whole mounting system at once. Each piece is manufactured to meet OE fit and function, and the set directly cross-references OEM numbers for a precise match.\u003c\/p\u003e\n\n\u003ch3\u003eHow will replacing all five mounts improve my Accord’s driving feel?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing the full mounting system restores proper engine alignment, minimizes torque-induced movement, and reduces noise transmitted into the cabin. A full kit prevents uneven load distribution that can happen when only one mount is changed, giving a more consistent, quieter ride.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEliminates excessive engine rocking under acceleration or deceleration.\u003c\/li\u003e\n  \u003cli\u003eReduces vibration felt at idle and during gear shifts.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent accelerated wear on adjacent drivetrain components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich specific mounts are included and how do they match my vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit contains five distinct pieces: front motor mount, front-right motor mount, rear motor mount, left upper transmission mount with bracket, and left lower transmission mount. Each part cross-references the OEM numbers listed for 2013–2017 Accord 2.4L (automatic) to ensure direct fitment without modification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM numbers like 50830T2FA01, 50820T2FA01, 50810T2FA01 and others.\u003c\/li\u003e\n  \u003cli\u003eMatches common aftermarket codes for straightforward compatibility checks.\u003c\/li\u003e\n  \u003cli\u003eSold as a matched set to avoid mismatched performance between new and old mounts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these mounts durable and how do they control vibration?\u003c\/h3\u003e\n\n\u003cp\u003eYllshengyu manufactures these mounts to meet OE quality standards, using materials and construction designed to manage engine torque and isolate vibration. The design focuses on durability while providing effective dampening to cut down on noise and harshness transmitted to the cabin.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eQuality-controlled components intended for long-term service life.\u003c\/li\u003e\n  \u003cli\u003eEngineered geometry and rubber isolators that absorb engine movement.\u003c\/li\u003e\n  \u003cli\u003eComplete set reduces stress concentration on any single mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before purchasing and installing this kit?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm compatibility with your specific vehicle build—this kit fits 2013–2017 Honda Accord with the L4 2.4L engine and automatic transmission only. Use the vehicle fit tools on the retailer page or compare the OEM part numbers to your existing mounts. Professional installation is recommended to ensure correct torque values and alignment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eVerify model year, engine (2.4L L4), and that transmission is automatic.\u003c\/li\u003e\n  \u003cli\u003eCompare OEM numbers on your old mounts with those listed for the kit.\u003c\/li\u003e\n  \u003cli\u003eHave a mechanic torque fasteners to manufacturer specifications during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Yllshengyu 5-piece mount kit is aimed at owners and mechanics servicing 2013–2017 Honda Accord 2.4L automatic vehicles who want a complete, OE-referenced replacement set. It’s ideal for people replacing multiple failing mounts, performing a major drivetrain refresh, or preparing a vehicle for resale and wanting consistent fitment and improved ride quality without sourcing individual parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit manual transmission Accords?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Yllshengyu kit is made for 2013–2017 Honda Accord 2.4L models with automatic transmission only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these direct OEM replacements?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each mount cross-references the listed OEM part numbers for direct fit and compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yllshengyu","offers":[{"title":"Default Title","offer_id":67584855244985,"sku":"B0DGDVZ63W","price":215.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yllshengyu-front-motor-mount-packaging.jpg?v=1790456562"},{"product_id":"lostar-coolant-reservoir-tank-for-kenworth-t680-t880-2013-2021-direct-fit-oem-replacement-durable","title":"LOSTAR Coolant Reservoir Tank for Kenworth T680\/T880 2013–2021 — Direct-Fit OEM Replacement, Durable","description":"\u003cstrong\u003eLOSTAR 603-5245 is a direct-fit coolant reservoir tank engineered to replace the original overflow bottle on 2013–2021 Kenworth T680 and 2014–2021 Kenworth T880 trucks.\u003c\/strong\u003e\n\n\u003cp\u003eThis replacement coolant reservoir provides a precise fit for Kenworth T680 and T880 cab and engine layouts, matching OEM mounting points and fluid capacity so you can restore proper coolant overflow management without modifying hoses or brackets. Built to strict quality-control standards, the LOSTAR tank is brand new, durable, and backed by a 1-year unlimited-mileage quality guarantee. It replaces OEM part numbers DR104002 and CP237001 and is intended as a like-for-like component for maintenance or repair jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this reservoir match my Kenworth's original part?\u003c\/h3\u003e\n\u003cp\u003eThe LOSTAR 603-5245 is manufactured to match the original equipment specifications so it installs using the same mounting points and hose fittings as the factory tank. That compatibility reduces installation time and avoids the need for adapters or custom brackets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for OEM numbers DR104002 and CP237001\u003c\/li\u003e\n  \u003cli\u003eFits Kenworth T680 model years 2013–2021\u003c\/li\u003e\n  \u003cli\u003eFits Kenworth T880 model years 2014–2021\u003c\/li\u003e\n  \u003cli\u003ePreformed hose connections and factory-style mounting bosses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe reservoir is produced from high-grade plastic compounds designed to resist coolant chemicals, heat cycling, and vibration common in heavy-duty truck applications. Quality-control processes ensure consistent wall thickness and sealed seams for long service life under normal operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable, chemical-resistant polymer construction\u003c\/li\u003e\n  \u003cli\u003ePrecision-molded to prevent leaks and stress cracks\u003c\/li\u003e\n  \u003cli\u003eTested for dimensional accuracy and fitment\u003c\/li\u003e\n  \u003cli\u003eBrand-new component, not remanufactured\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone with basic truck maintenance skills and common hand tools. Because it is a direct-fit unit, you will typically remove the old reservoir, swap hoses and clamps, bolt the new tank into place, and refill coolant to the proper level following your vehicle’s service manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard hand tools required (screwdrivers, pliers, socket set)\u003c\/li\u003e\n  \u003cli\u003eExpect to drain or capture overflow coolant before disconnection\u003c\/li\u003e\n  \u003cli\u003eReuse original hose clamps or replace if corroded\u003c\/li\u003e\n  \u003cli\u003eCheck for proper venting and fill to manufacturer-specified level\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with this replacement tank?\u003c\/h3\u003e\n\u003cp\u003eLOSTAR includes a 1-year unlimited-mileage quality guarantee on this part, covering manufacturing defects under normal operating conditions. If you find fitment issues or defect-related failures within the warranty period, contact the seller or LOSTAR customer support for assistance and replacement options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1-year unlimited-mileage quality guarantee\u003c\/li\u003e\n  \u003cli\u003eReplacement or support for verified manufacturing defects\u003c\/li\u003e\n  \u003cli\u003eSold as a single unit, brand new condition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This LOSTAR coolant reservoir is aimed at fleet managers, owner-operators, and repair shops maintaining Kenworth T680 (2013–2021) and T880 (2014–2021) trucks who need a reliable, OEM-compatible overflow tank. It suits anyone performing routine cooling-system service or replacing damaged or leaking reservoirs and who prefers a ready-to-install, warranty-backed part that meets original part specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tank fit both T680 and T880 Kenworth models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The LOSTAR 603-5245 fits Kenworth T680 (2013–2021) and T880 (2014–2021) models as a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the reservoir covered by a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. LOSTAR provides a 1-year unlimited-mileage quality guarantee against manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LOSTAR","offers":[{"title":"Default Title","offer_id":67584855310521,"sku":"B089NB9NK1","price":428.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lostar-coolant-reservoir-front-view.jpg?v=1790456564"},{"product_id":"yllshengyu-engine-transmission-mount-kit-for-jeep-cherokee-2-4l-2014-2021-3-piece-hydraulic-set-to-reduce-vibration","title":"Yllshengyu Engine \u0026 Transmission Mount Kit for Jeep Cherokee 2.4L (2014–2021) — 3-Piece Hydraulic Set to Reduce Vibration","description":"\u003cp\u003e\u003cstrong\u003eYllshengyu’s complete hydraulic engine and transmission mount kit replaces the front, left\/right and rear torque mounts on 2014–2021 Jeep Cherokee 2.4L (and select 2015–2019 Chrysler 200 2.4L) to restore secure engine positioning and reduce vibration and noise.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis three-piece mount kit is engineered as a direct replacement for the worn or broken hydraulic engine and transmission mounts used on affected Jeep Cherokee and Chrysler 200 vehicles. Designed to match OEM form, fit and function, the set includes a hydraulic right engine mount, a hydraulic left transmission mount and a rear lower engine torque strut mount. When installed together, the kit helps control engine movement, reduce NVH (noise, vibration and harshness) and returns driveline stability to factory-like levels.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines is this mount kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis kit is built specifically for 2.4L four-cylinder applications and will not fit 3.2L models. Confirm fitment before ordering to avoid installation issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Jeep Cherokee 2014–2021 with 2.4L engine\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Chrysler 200 2015–2019 with 2.4L engine\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 3.2L engines or other dissimilar configurations\u003c\/li\u003e\n  \u003cli\u003eUse Amazon's \"Your Garage\" tool or VIN lookup to verify fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit handle engine movement and NVH?\u003c\/h3\u003e\n\u003cp\u003eThe hydraulic mounts absorb and dampen engine movement better than rigid mounts, helping limit transfer of vibration into the cabin. Installed as a matched set they distribute loads and reduce drivetrain stress during acceleration, idle and gear changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHydraulic cores tuned to damp vibrations across RPM ranges\u003c\/li\u003e\n  \u003cli\u003eRear torque strut controls fore-aft engine motion under load\u003c\/li\u003e\n  \u003cli\u003eRestores factory ride comfort and reduces engine boom or shake\u003c\/li\u003e\n  \u003cli\u003eHelps protect exhaust, wiring and hoses from movement-related wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat OEM part numbers does this replacement cover?\u003c\/h3\u003e\n\u003cp\u003eThe kit is manufactured to replace a range of factory part numbers so it fits common service needs without hunting for individual components. It covers multiple original numbers used across model years to simplify purchasing the correct replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovers common OEM references such as 3378, 3380 and 3308\u003c\/li\u003e\n  \u003cli\u003eAlso replaces A5844, A5752 and A5825 among others\u003c\/li\u003e\n  \u003cli\u003eIncludes compatibility with larger reference list like 4877788AF and 68240438AA\u003c\/li\u003e\n  \u003cli\u003eCheck specific OEM numbers against your vehicle for exact match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect when installing this Yllshengyu mount kit?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically follows standard mount replacement steps: support the engine, remove the old mounts, and torque the new mounts to factory specifications. Professional installation is recommended if you lack lift equipment or mechanical experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes right hydraulic engine mount, left hydraulic transmission mount, and rear torque strut\u003c\/li\u003e\n  \u003cli\u003eBuilt to OEM size and mounting hole locations for direct swap\u003c\/li\u003e\n  \u003cli\u003eRequires engine support and correct torque sequencing for safety\u003c\/li\u003e\n  \u003cli\u003eMay require minor adjustments to alignment after replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Yllshengyu Engine Motor Transmission Mount Kit is aimed at DIY mechanics, independent repair shops and fleet owners servicing 2014–2021 Jeep Cherokee and 2015–2019 Chrysler 200 2.4L vehicles that need a complete, matched replacement for failing hydraulic mounts. If you want to restore ride comfort, reduce engine-induced vibrations and ensure proper engine positioning with parts designed to meet OEM-style specifications, this kit provides the three mounts commonly replaced together during engine\/transmission mount service. Remember to confirm your vehicle's engine size and use Amazon's \"Your Garage\" compatibility tool or your VIN to verify fit before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit Jeep Cherokee with a 3.2L engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Yllshengyu kit is for 2.4L engines only and will not fit 3.2L Cherokee models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are all three mounts included in one package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes the right hydraulic engine mount, left hydraulic transmission mount, and the rear lower torque strut.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yllshengyu","offers":[{"title":"Default Title","offer_id":67584855474361,"sku":"B0CWS3JG2W","price":233.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yllshengyu-front-packaging-mount-kit.jpg?v=1790456562"},{"product_id":"siless-car-sound-deadening-mat-36-sq-ft-2mm-80-mil-butyl-dampener-for-noise-reduction-vibration-control","title":"Siless Car Sound Deadening Mat 36 sq ft (2mm) — 80 mil Butyl Dampener for Noise Reduction \u0026 Vibration Control","description":"\u003cp\u003e\u003cstrong\u003eSiless 80 mil (2mm) 36 sq ft sound deadening mat is a high-density butyl damping sheet engineered to reduce road noise, minimize panel vibration, and improve in-car audio clarity.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 36-square-foot roll packs a thick 2mm (80 mil) butyl compound developed for automotive use, delivering substantial vibration control and acoustic insulation without messy adhesives or sprays. The product balances professional-grade performance with straightforward peel-and-stick application so enthusiasts and installers can add damping to doors, floors, trunks, roofs, and bulkheads quickly. It’s designed to lay flat, adhere reliably, and remain effective in the temperature ranges common to automotive environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this mat change cabin noise and vibration?\u003c\/h3\u003e\n\n\u003cp\u003eThe Siless 80 mil mat increases panel mass and converts vibrational energy into heat, cutting resonant rattles and lowering mid-to-low frequency noise that commonly travels through sheet metal. Resulting reduction in ring and droning gives audio systems a firmer foundation and quieter road character without adding complex electronic processing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThick 2mm butyl layer for measurable vibration damping\u003c\/li\u003e\n  \u003cli\u003eReduces panel resonance and airborne noise transfer\u003c\/li\u003e\n  \u003cli\u003eImproves loudspeaker performance by creating a stiffer mounting surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation for a DIYer or shop installer?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows a simple peel-and-place routine so both home mechanics and professionals can apply the material quickly. Cut the sheets to fit panels, remove the liner, press into place, and hand-roll or use a roller to ensure full contact; no separate adhesives are required.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eComes as pre-sized sheets that trim easily with scissors or a utility knife\u003c\/li\u003e\n  \u003cli\u003eSelf-adhesive butyl backing avoids messy glue application\u003c\/li\u003e\n  \u003cli\u003eInstructions included; roller recommended for best adherence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere on the vehicle should I use this 36 sq ft kit?\u003c\/h3\u003e\n\n\u003cp\u003eThis coverage is practical for damping high-vibration areas: full-size trunks, multiple doors, or strategic floor and roof application in smaller vehicles. Prioritize large flat metal panels and speaker mounting surfaces for the most noticeable gains in noise reduction and audio fidelity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDoors and speaker cavities to eliminate panel flex and improve bass response\u003c\/li\u003e\n  \u003cli\u003eFloors and roofs to cut road noise and echoing\u003c\/li\u003e\n  \u003cli\u003eTrunks and bulkheads to suppress low-frequency booming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the product’s composition and practical specs?\u003c\/h3\u003e\n\n\u003cp\u003eSiless VIBRO uses an advanced butyl-based mastic formulated to maximize damping efficiency while remaining pliable for conforming to irregular contours. The kit covers 36 square feet at 80 mil thickness (2mm), offering a balance of mass and workability for effective automotive sound control.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThickness: 80 mil \/ 2 mm for high damping performance\u003c\/li\u003e\n  \u003cli\u003eCoverage: 36 sq ft (3.4 m²) per pack\u003c\/li\u003e\n  \u003cli\u003eApplication: peel-and-place sheets; no additional adhesive needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Siless 80 mil sound deadening mat is aimed at car audio enthusiasts, DIY restorers, and professional installers who want substantial vibration control without complex installation methods. If you’re upgrading speakers, reducing cabin noise, or improving overall ride acoustics, this thick butyl product provides robust damping for commonly problematic panels while remaining cost-efficient and user-friendly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this mat stick without extra adhesive?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Siless mat has a self-adhesive butyl backing for peel-and-place installation; a roller is recommended for full adhesion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is 36 sq ft enough for a full car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: 36 sq ft suits targeted damping—doors, trunk, or partial floor. Full-car coverage may need multiple packs depending on vehicle size.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Siless","offers":[{"title":"Default Title","offer_id":67584856391865,"sku":"B07BLSP8JV","price":200.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/siless-front-packaging-mat.jpg?v=1790456595"},{"product_id":"auxbeam-bc60-6-gang-touch-switch-panel-blue-automatic-dimmable-backlight-relay-control-for-12v-vehicles","title":"Auxbeam BC60 6-Gang Touch Switch Panel - Blue, Automatic Dimmable Backlight \u0026 Relay Control for 12V Vehicles","description":"\u003cp\u003e\u003cstrong\u003eThe Auxbeam BC60 is a compact 6-gang touch switch panel and relay control kit that centralizes and simplifies wiring for 12V vehicle accessories with automatic backlight dimming.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe BC60 bundle pairs a slim dash-mounted touch panel with a remote relay\/control box to operate lights, winches, air compressors and other 12V add-ons without messy standalone switches. Designed for cars, trucks, boats, UTVs and SUVs, the system consolidates multiple accessory circuits into one neat module, includes plug-and-play harnesses, and comes with a three-year manufacturer warranty.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BC60 make installing and wiring accessories easier?\u003c\/h3\u003e\n\u003cp\u003eAuxbeam built the BC60 to reduce the number of separate wiring runs and fuses under your dash. The included relay control box handles high-current loads while the panel provides low-voltage touch control. Plug-and-play harnesses and a compact control box footprint let you mount the system with minimal cutting or drilling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-wired harness for straightforward plug connections\u003c\/li\u003e\n  \u003cli\u003eRemote relay box consolidates high-current circuits up to 60A total\u003c\/li\u003e\n  \u003cli\u003eTwo mounting brackets and adhesive tape for flexible placement\u003c\/li\u003e\n  \u003cli\u003eIncluded auto fuses and zip ties tidy wiring and protect circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the automatic dimmable function do on night drives?\u003c\/h3\u003e\n\u003cp\u003eThe BC60 panel senses ambient light and adjusts button backlighting accordingly so the display isn’t too bright at night or too dim by day. This automatic dimming preserves night vision and reduces distraction while still making each switch legible. It’s helpful for both nighttime trail runs and highway driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAmbient light sensor adjusts LED brightness in real time\u003c\/li\u003e\n  \u003cli\u003eSmoother visibility transition between day and night\u003c\/li\u003e\n  \u003cli\u003eImproves safety by reducing glare in low-light conditions\u003c\/li\u003e\n  \u003cli\u003eMaintains clear switch labeling without manual adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and accessories are compatible with the BC60?\u003c\/h3\u003e\n\u003cp\u003eThe BC60 is designed for 12V electrical systems only, making it compatible with most passenger cars, pickups, off-road vehicles, marine craft and powersports machines that run on 12 volts. It’s suitable for controlling lights, refrigerators, compressors, auxiliary fans, and other aftermarket electronics that need switched, fused power.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with DC 12V vehicles; not for 24V systems\u003c\/li\u003e\n  \u003cli\u003eHandles up to 720W total, 60A maximum current rating\u003c\/li\u003e\n  \u003cli\u003eCompact panel (3.7\" × 2.6\") fits dash, console, overhead areas\u003c\/li\u003e\n  \u003cli\u003eControl box footprint (3.2\" × 4.4\") fits tight engine-bay or storage spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow customizable and durable is the BC60 kit?\u003c\/h3\u003e\n\u003cp\u003eThe package includes 60 adhesive label stickers so you can identify each switch for your unique setup. Rugged construction, automotive-grade connectors and included auto fuses help protect circuits and extend service life. Auxbeam also backs the unit with a three-year warranty to address manufacturing defects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e60 DIY stickers let you label each switch clearly\u003c\/li\u003e\n  \u003cli\u003eAuto fuses included for circuit protection\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty relay box and secure mounting options\u003c\/li\u003e\n  \u003cli\u003e3-year manufacturer warranty for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Auxbeam BC60 is aimed at vehicle owners, fleet users and outdoor enthusiasts who want a tidy, professional solution for adding and controlling multiple 12V accessories. It’s ideal if you want an easy-to-install, space-saving switch array with automatic backlight dimming and centralized relay protection — especially for trucks, SUVs, boats, ATVs, UTVs and custom builds that require clean, reliable accessory switching.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the BC60 compatible with 24V systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The BC60 is designed for DC 12V vehicles only and should not be used on 24V electrical systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum current the system supports?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The BC60 supports up to 60A total and a maximum power rating of 720W for the connected accessories.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Auxbeam","offers":[{"title":"Default Title","offer_id":67584856555705,"sku":"B08J6MJD4N","price":321.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/auxbeam-bc60-front-panel-blue.jpg?v=1790456593"},{"product_id":"orion-motor-tech-12v-diesel-transfer-pump-portable-kit-with-nozzle-hoses-11-9-gpm","title":"Orion Motor Tech 12V Diesel Transfer Pump, Portable Kit with Nozzle \u0026 Hoses — 11.9 GPM","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech 12V Diesel Transfer Pump is a portable, self-priming electric pump kit that moves diesel and other light oils up to 11.9 gallons per minute and comes complete with inlet\/outlet hoses, a nozzle, and mounting accessories.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact diesel transfer pump is engineered for fast, tidy fluid handling wherever you need it — garages, boats, farms, and job sites. The kit pairs a 0.2 hp (175W) copper motor inside a steel housing with ready-to-use hoses and a spray-style nozzle that supports both trigger control and continuous flow. Safety and reliability are built in via a mesh strainer, bypass valve, mounting base, and thermal-rest guidance for extended use.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this pump move diesel on site?\u003c\/h3\u003e\n\u003cp\u003eThe pump delivers up to 11.9 gallons per minute under normal conditions, making short work of common transfer tasks. It’s self-priming and rated with a 16'5\" maximum suction distance and a 32'10\" maximum lift, so it can pull from lower tanks or move fuel vertically when needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTop flow rate: 11.9 GPM for rapid transfers\u003c\/li\u003e\n  \u003cli\u003eMax suction: 16'5\" (5 meters approx.) for deep draws\u003c\/li\u003e\n  \u003cli\u003eMax lift: 32'10\" (10 meters approx.) for elevated discharge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat controls and safety features are included?\u003c\/h3\u003e\n\u003cp\u003eThe included nozzle has an adjustable trigger for precise manual flow and a latch for continuous pumping. Built-in safeguards like a mesh inlet strainer and a bypass valve help prevent clogs and overpressure, while the mounting base reduces vibration and secures the unit during operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable trigger with continuous-flow lock\u003c\/li\u003e\n  \u003cli\u003eMesh strainer to block debris and protect the pump\u003c\/li\u003e\n  \u003cli\u003eBypass valve to avoid pressure build-up\u003c\/li\u003e\n  \u003cli\u003eMounting base for stable, wobble-free use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat types of fluids and equipment is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis electric pump is designed for low-viscosity fluids such as diesel, kerosene, and similar light oils. It is not intended for high-viscosity liquids (for example heavy motor oils) and should be used only with compatible fuels and lubricants to maintain motor health.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with diesel, kerosene, and light heating oils\u003c\/li\u003e\n  \u003cli\u003eNot recommended for thick motor oils or high-viscosity fluids\u003c\/li\u003e\n  \u003cli\u003eIdeal for cars, boats, mowers, and portable tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I operate the pump for long-lasting performance?\u003c\/h3\u003e\n\u003cp\u003eTo protect the motor, follow the recommended duty cycle and cooling guidance: allow a 5-minute rest after each 10 minutes of continuous use when ambient temperatures exceed 45°C (113°F). Avoid running the pump dry and keep the inlet strainer clean to prevent overheating and extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended duty cycle: rest 5 minutes after 10 continuous minutes above 45°C\u003c\/li\u003e\n  \u003cli\u003eAvoid pumping high-viscosity fluids or running dry\u003c\/li\u003e\n  \u003cli\u003eRegularly inspect and clean the inlet strainer and hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Orion Motor Tech 12V Diesel Transfer Pump kit is tailored for mechanics, boat owners, landscapers, fleet operators, and DIYers who need a reliable, portable solution for moving diesel and other light oils quickly and cleanly. If you require a compact, electrically powered pump with straightforward controls, solid construction, and a ready-to-use accessory set, this unit delivers practical, job-ready performance without complicated setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this pump be used with gasoline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit is designed for diesel and light oils; avoid using it with gasoline due to safety and compatibility concerns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long can I run the pump continuously?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow duty guidance: allow a 5-minute rest after every 10 minutes of continuous use when ambient temperature exceeds 45°C.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584856522937,"sku":"B019ZD3U90","price":211.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-pump-front-view_a9a9c92a-21ed-49e7-ab15-1628c8157697.jpg?v=1790456593"},{"product_id":"auxbeam-ra80-8-gang-rgb-switch-panel-12-24v-60a-dimmable-backlight-toggle-momentary-pulsed-modes","title":"Auxbeam RA80 8-Gang RGB Switch Panel — 12–24V 60A, Dimmable Backlight \u0026 Toggle\/Momentary\/Pulsed Modes","description":"\u003cstrong\u003eThe Auxbeam RA80 is an 8-gang, 12–24V RGB switch panel that offers toggle, momentary and pulsed modes plus dimmable backlighting for in-vehicle accessory control.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned for trucks, RVs, boats and custom build vehicles, the RA80 consolidates up to eight accessories into a single, compact controller. It supports 12–24V DC circuits with a maximum of 60A and an overall power range suitable for a wide variety of lighting and device setups. The panel features an RGB backlight that you can match to your cabin lighting and an auto-sensing dimmer to reduce glare in low-light driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the RA80 manage different switch behaviors?\u003c\/h3\u003e\n\u003cp\u003eThe RA80 provides three distinct activation styles — steady (toggle), hold-to-activate (momentary), and strobe-style (pulsed) — so each circuit can operate exactly how you need. You can set each gang independently and the unit remembers your last configuration after power cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eToggle for continuous power to lights or pumps.\u003c\/li\u003e\n  \u003cli\u003eMomentary for horns, relays or temporary functions.\u003c\/li\u003e\n  \u003cli\u003ePulsed for strobe or attention lighting with adjustable pacing.\u003c\/li\u003e\n  \u003cli\u003eMemory hold preserves modes across restarts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat lighting and dimming options are available for the panel?\u003c\/h3\u003e\n\u003cp\u003eThe RA80 uses RGB LEDs behind each button so you can customize the color to match interior themes. Brightness adapts automatically to ambient light, and a manual mode button lets you disable or set the backlight level during daytime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull RGB color selection to sync with vehicle lighting.\u003c\/li\u003e\n  \u003cli\u003eAuto-dimming adjusts to surrounding light to prevent glare.\u003c\/li\u003e\n  \u003cli\u003eManual override to turn backlight off or lock preferred brightness.\u003c\/li\u003e\n  \u003cli\u003eClear, legible buttons for night and daytime visibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical specs and compatibility should I know before installing?\u003c\/h3\u003e\n\u003cp\u003eThe RA80 supports 12V–24V DC systems and is rated to handle a combined maximum current of 60A across its circuits. It’s built for typical vehicle environments and wide temperature ranges, making it suitable for on-road and off-road applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInput voltage: 12V–24V DC.\u003c\/li\u003e\n  \u003cli\u003eMaximum combined current: 60A (720W–1400W total power range depending on system voltage).\u003c\/li\u003e\n  \u003cli\u003eOperating temperature from -40°F to 221°F for harsh environments.\u003c\/li\u003e\n  \u003cli\u003eWorks with lights, fans, stereos, relays and other 12–24V accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable is the RA80 and what support does Auxbeam provide?\u003c\/h3\u003e\n\u003cp\u003eAuxbeam backs this panel with a three-year warranty and responsive customer service. The circuit design includes memory for mode retention, and the device is built to withstand a wide temperature range for consistent operation in diverse conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-year warranty covering manufacturing defects.\u003c\/li\u003e\n  \u003cli\u003e24-hour online customer support for setup or troubleshooting.\u003c\/li\u003e\n  \u003cli\u003eRobust temperature tolerance for outdoor and mobile use.\u003c\/li\u003e\n  \u003cli\u003eDesigned for easy integration with common vehicle wiring and relays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Auxbeam RA80 is ideal for vehicle owners and custom installers who need compact, flexible control of multiple 12–24V accessories. It suits overlanders, truck drivers, marine enthusiasts, RV renovators and anyone adding lights, fans or auxiliary systems who wants programmable modes, visual customization and durable, vehicle-grade hardware. If you require app integration, note this model does not include an app; its strengths are direct wired control, RGB customization, and mode memory for dependable, hands-on operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What voltage does the RA80 support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The RA80 works with 12–24V DC systems and supports a combined maximum current of 60A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I change the backlight color and brightness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — full RGB color selection and auto-dimming with a manual override are available.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Auxbeam","offers":[{"title":"Default Title","offer_id":67584857178297,"sku":"B0D8VYYB4G","price":409.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/auxbeam-ra80-front-panel.jpg?v=1790456619"},{"product_id":"auxbeam-8-circuit-touch-switch-panel-ba80-8-gang-ip65-waterproof-solid-state-relays","title":"Auxbeam 8-Circuit Touch Switch Panel BA80 — 8-Gang, IP65 Waterproof, Solid-State Relays","description":"\u003cp\u003e\u003cstrong\u003eThe Auxbeam BA80 is an 8‑circuit touch switch panel with built‑in solid‑state relays, auto‑dimmable backlight and IP65 protection for centralized control of vehicle and marine accessories.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe BA80 combines a compact footprint with heavy‑duty electrical capacity, letting you replace scattered toggles and inline relays with one neat interface. Designed for 12–24V systems, it supports high current loads while protecting connected accessories through integrated safety features and replaceable fuses. Plug‑and‑play harnesses and multiple mounting options make it straightforward to install in trucks, boats, ATVs, UTVs and more.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BA80 protect my lights and accessories?\u003c\/h3\u003e\n\u003cp\u003eThe BA80 uses built‑in solid‑state relays and protective circuitry to prevent common electrical faults from damaging equipment. Over‑voltage, reverse polarity, over‑current and thermal protections are included, plus spare fuses so you can quickly restore service if a fuse blows.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid‑state relays for reliable switching without external relay packs\u003c\/li\u003e\n  \u003cli\u003eOver‑current and thermal cutoff to reduce risk of overheating\u003c\/li\u003e\n  \u003cli\u003eReverse‑polarity and over‑voltage safeguards for safe connections\u003c\/li\u003e\n  \u003cli\u003eReplaceable onboard fuses for quick maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical loads and environments can it handle?\u003c\/h3\u003e\n\u003cp\u003eThe BA80 is rated for 12–24V systems and supports high wattage loads depending on voltage. It operates across a wide temperature range and carries an IP65 waterproof rating, making it suitable for harsh outdoor and marine environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating voltage: DC 12–24V, suitable for most vehicles and boats\u003c\/li\u003e\n  \u003cli\u003eCurrent handling: up to 60A maximum; per‑channel ratings vary by voltage\u003c\/li\u003e\n  \u003cli\u003ePower limits: up to 600W at 12V and 1200W at 24V total where applicable\u003c\/li\u003e\n  \u003cli\u003eDurability: -40°F to 221°F operating range and IP65 water resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and customization?\u003c\/h3\u003e\n\u003cp\u003eAuxbeam designed the BA80 for minimal cutting and straightforward wiring. The unit includes plug‑and‑play harnesses, two mounting bracket styles, and a set of 60 adhesive labels so you can mark each circuit for quick identification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug‑and‑play wiring harnesses reduce complex wiring tasks\u003c\/li\u003e\n  \u003cli\u003eNo large dashboard cutouts required — compact mounting options included\u003c\/li\u003e\n  \u003cli\u003eTwo bracket types for flexible placement and secure fitment\u003c\/li\u003e\n  \u003cli\u003e60 self‑adhesive labels for personalized circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat unique user conveniences does the BA80 offer?\u003c\/h3\u003e\n\u003cp\u003eThe BA80's panel automatically adjusts backlight brightness to ambient light, providing clear visibility during daytime and reduced glare at night. The touch surface and compact layout centralize control of multiple accessories for a cleaner dash and easier operation while driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic dimmable backlight adapts to surrounding brightness\u003c\/li\u003e\n  \u003cli\u003eTouch‑style switches for a modern, streamlined look\u003c\/li\u003e\n  \u003cli\u003eCentralized control reduces dashboard clutter and simplifies use\u003c\/li\u003e\n  \u003cli\u003eCompact design suited to space‑limited cockpits and consoles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Auxbeam BA80 is aimed at vehicle and marine owners who want a durable, high‑capacity control hub to manage multiple lights and accessories without external relay boxes. It’s a good fit for off‑roaders, boat owners, commercial vehicle drivers and anyone upgrading factory switchgear who needs robust protection, easy installation and adjustable backlighting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the BA80 work with 24V systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The BA80 supports DC 12–24V systems with per‑channel and total power ratings adjusted for 24V operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install it without cutting a large dashboard hole?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The compact chassis and included mounting brackets allow installation without major dashboard modifications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Auxbeam","offers":[{"title":"Default Title","offer_id":67584857407673,"sku":"B07KZLB74K","price":388.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/auxbeam-ba80-front-panel.jpg?v=1790456618"},{"product_id":"osram-xenarc-d3s-hid-xenon-headlight-bulbs-cool-blue-5500k-pack-of-2-35w-3-200-lm-made-in-germany","title":"OSRAM Xenarc D3S HID Xenon Headlight Bulbs — Cool Blue 5500K Pack of 2, 35W 3,200 lm Made in Germany","description":"\u003cp\u003e\u003cstrong\u003eOSRAM Xenarc D3S Cool Blue 66340CB are high-output 35W HID xenon headlight bulbs that deliver a crisp 5,500K white-blue beam and up to 3,200 lumens per bulb for brighter, higher-contrast road illumination.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese premium German-made xenon lamps combine advanced filling technology and OEM-grade manufacturing to create a sharper, cooler-toned light than typical 4,300K stock bulbs. Designed and produced by OSRAM, the Xenarc Cool Blue model aims to give a modern, attention-catching appearance while maintaining lawful on-road use when matched to compatible D3S housings and ballast systems.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these bulbs differ from standard xenon or halogen lights?\u003c\/h3\u003e\n\u003cp\u003eCompared with halogen bulbs, HID xenon lamps produce far greater brightness and a color temperature that appears whiter and slightly blue. Versus standard 4,300K xenon, the Cool Blue reaches about 5,500K, creating a cooler visual tone and higher perceived contrast without changing the lamp's electrical rating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eColor temperature: approximately 5,500K for a whiter-blue look\u003c\/li\u003e\n  \u003cli\u003eLight output: roughly 3,200 lumens per bulb (±15%)\u003c\/li\u003e\n  \u003cli\u003ePower rating: 42V \/ 35W compatible with D3S HID systems\u003c\/li\u003e\n  \u003cli\u003eDesigned to be noticeably brighter in appearance than halogen\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these OSRAM D3S bulbs fit my vehicle and setup?\u003c\/h3\u003e\n\u003cp\u003eFitment depends on your car's factory headlamp system: these bulbs use the D3S base (PK32d-5) and require a compatible xenon ballast and socket. They will not fit D1S or D8S housings even if the base looks similar, so confirm your vehicle's bulb type before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize: D3S with PK32d-5 base—verify your owner's manual or bulb label\u003c\/li\u003e\n  \u003cli\u003eNot compatible with D1S or D8S housings\u003c\/li\u003e\n  \u003cli\u003ePlease confirm ballast compatibility for proper ignition and beam control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and longevity can I expect from the Cool Blue 66340CB?\u003c\/h3\u003e\n\u003cp\u003eOSRAM rates these bulbs at about 3,000 hours of typical service life under normal conditions, with peak brightness near initial installation. Over time the color characteristics shift and brightness decreases—this is normal for HID technology as the gas composition and electrode wear change with use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated life: approximately 3,000 hours\u003c\/li\u003e\n  \u003cli\u003eInitial luminous flux: ~3,200 lumens per bulb\u003c\/li\u003e\n  \u003cli\u003eColor shift: spectral tint evolves toward bluer tones as the bulb ages\u003c\/li\u003e\n  \u003cli\u003eSold as an OEM-grade pack of two with authenticity label\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre OSRAM Xenarc Cool Blue bulbs legal and safe for street use?\u003c\/h3\u003e\n\u003cp\u003eThese Xenarc D3S lamps are manufactured to meet road-legal standards where HID replacements of the correct type are permitted. Always ensure your headlamp assembly and aim comply with local regulations and that the D3S model is the factory-specified option for your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured in Germany with an OSRAM authenticity label\u003c\/li\u003e\n  \u003cli\u003eDesigned for vehicles that originally use D3S HID bulbs\u003c\/li\u003e\n  \u003cli\u003eProper installation and aiming are required to meet legal on-road lighting rules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers who want a cleaner, cooler-looking xenon beam and OEM-level construction—especially owners of vehicles factory-equipped for D3S HID systems. If you seek a brighter, high-contrast appearance without changing your headlamp housing, and you have confirmed D3S compatibility, the OSRAM Xenarc 66340CB Cool Blue offers a German-made option that blends modern styling with proven xenon performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs compatible with D1S or D8S sockets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The 66340CB is a D3S (PK32d-5) bulb and will not fit D1S or D8S housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do OSRAM Xenarc Cool Blue bulbs typically last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are rated around 3,000 hours under normal use, though color and brightness change over time.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OSRAM","offers":[{"title":"Default Title","offer_id":67584857833657,"sku":"B0DQFPTMB1","price":265.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/osram-xenarc-d3s-front-packaging.jpg?v=1790456642"},{"product_id":"melling-oil-pump-for-gm-ls-series-internal-wet-sump-standard-volume-high-pressure-with-7-8-inlet","title":"Melling Oil Pump for GM LS-Series — Internal Wet-Sump, Standard Volume, High-Pressure with 7\/8\" Inlet","description":"\u003cp\u003e\u003cstrong\u003eMelling's internal wet-sump oil pump for GM LS-series engines delivers higher operating pressure at stock volume, with a 7\/8\" bolt-on screen inlet and an optional +25 psi spring for high-performance COPO Camaro applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pump is designed as a direct-fit internal wet-sump replacement for GM LS-family engines where you want stock oil capacity but improved pressure control. It combines the standard pump volume your engine expects with a higher pressure profile than Melling's M295 unit—approximately a 10 PSI increase—while accepting the factory-style 7\/8\" bolt-on inlet screen. For racers or street engines that need added pressure under load, an optional +25 psi spring is included for COPO Camaro setups and can be selected when higher spring rates are required.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pump affect engine oil pressure and delivery?\u003c\/h3\u003e\n\u003cp\u003eThe pump raises system pressure compared with the baseline M295 model without changing the standard oil volume. That means more consistent oil pressure at critical points in the oiling circuit, especially under high RPM or heavy load. It’s built to maintain proper flow while increasing pressure, so lubrication remains stable across operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard volume: preserves factory oil capacity and pickup geometry\u003c\/li\u003e\n  \u003cli\u003eHigher pressure: around +10 PSI higher than M295 at similar conditions\u003c\/li\u003e\n  \u003cli\u003eOptional +25 psi spring: for COPO Camaro and higher-pressure demands\u003c\/li\u003e\n  \u003cli\u003eMaintains required flow characteristics for LS-series engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my GM LS-series engine and intake pickup?\u003c\/h3\u003e\n\u003cp\u003eYes — this Melling pump is an internal, wet-sump design made for GM LS-series blocks that use a 7\/8\" diameter bolt-on inlet screen. It installs in place of the factory pump with the same external mounting pattern and pickup compatibility, simplifying replacement or upgrade jobs without modifying the oil pan or pickup tube.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit internal wet-sump design for LS-series blocks\u003c\/li\u003e\n  \u003cli\u003eUses standard 7\/8\" bolt-on inlet screen for easy swap\u003c\/li\u003e\n  \u003cli\u003eNo oil pan or pickup tube alterations required in most applications\u003c\/li\u003e\n  \u003cli\u003eSold each — one pump per order\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance or service situations justify upgrading to this pump?\u003c\/h3\u003e\n\u003cp\u003eConsider this pump when you need higher oil pressure for stability during sustained high RPMs, towing, or spirited driving while keeping stock oil volume. It’s also a recommended choice for engines that have experienced low-pressure symptoms on the factory pump, or for builders specifying a spring change for COPO Camaro competition setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved pressure for high-RPM or high-load operation\u003c\/li\u003e\n  \u003cli\u003eUseful for engines with marginal factory oil pressure\u003c\/li\u003e\n  \u003cli\u003eOptional higher-rate spring for competition\/COPO applications\u003c\/li\u003e\n  \u003cli\u003eMaintains OEM oil volume—no hidden capacity trade-offs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Melling internal oil pump is aimed at GM LS-series owners and engine builders who want a reliable direct-replacement pump that raises system pressure without changing oil capacity. It's well suited to street performance builds, light-duty race engines, and any LS application where consistent, higher pressure is desired—particularly when you want to retain the factory-style 7\/8\" inlet screen and pickup layout. Choose the optional +25 psi spring when preparing COPO Camaro engines or other high-pressure setups that require an elevated base pressure.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump use the factory 7\/8\" bolt-on inlet screen?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It accepts the standard 7\/8\" diameter bolt-on inlet screen for direct replacement or upgrade.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the +25 psi spring required for normal street use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The +25 psi spring is optional and intended for high-pressure COPO or competition setups.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Melling","offers":[{"title":"Default Title","offer_id":67584858030265,"sku":"B001T8H0JG","price":311.26,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/melling-oil-pump-front-view.jpg?v=1790456634"},{"product_id":"auxito-9005-led-bulbs-6500k-cool-white-pack-of-2-15-brighter-with-adjustable-beam","title":"AUXITO 9005 LED Bulbs — 6500K Cool White, Pack of 2, 15× Brighter with Adjustable Beam","description":"\u003cb\u003eAUXITO 9005 bulbs are high-output, plug-and-play LED headlight replacements that deliver up to 15× brighter, 6500K cool-white light with an adjustable beam and active cooling for long, reliable service.\u003c\/b\u003e\n\n\u003cp\u003eIf you want a straightforward upgrade from halogen headlights that produces a crisp white beam and wide road coverage, these AUXITO 9005\/HB3 LED bulbs are built to be a direct swap. They combine compact, halogen-like dimensions with high-power chips and a turbo fan cooling system so you get strong illumination without complicated installation or frequent replacements. The design focuses on a balanced beam pattern to improve visibility while minimizing glare for other drivers.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these LEDs compared with standard halogens?\u003c\/h3\u003e\n\u003cp\u003eThe AUXITO 9005 set uses custom high-power LED chips to produce substantially more light output than factory halogens. Expect a pronounced increase in roadway illumination and earlier recognition of obstacles without drastically changing beam shape.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated output: up to 80,000 lumens combined (pair) and described as 15× the brightness of standard halogens\u003c\/li\u003e\n  \u003cli\u003eColor temperature: 6500K cool white for clearer contrast and road detail\u003c\/li\u003e\n  \u003cli\u003e360° illumination from an ultra-thin 0.079-inch board to reduce dark spots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my vehicle and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eAUXITO engineered these LEDs with near-identical dimensions to most halogen 9005\/HB3 bulbs so they tuck into housings and dust covers more easily. The kit is intended to be plug-and-play and installs in minutes with no cutting or rewiring in almost all applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue 1:1 OEM fit for quick swap-in replacement\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connector compatible with 99% of vehicles without error codes\u003c\/li\u003e\n  \u003cli\u003eSupport available for rare models that require an additional decoder or CANbus adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these bulbs manage heat and lifespan?\u003c\/h3\u003e\n\u003cp\u003eThermal control combines aerospace-grade materials and active cooling to keep the LEDs within safe operating temperatures for consistent light output. The cooling system and robust driver design extend durability and reduce the need for frequent bulb changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAviation aluminum housing and copper thermostat plate for fast heat transfer\u003c\/li\u003e\n  \u003cli\u003e12,000 RPM turbo cooling fan to maintain core temperature below stated limits\u003c\/li\u003e\n  \u003cli\u003eManufacturer-rated long life up to 60,000 hours under proper conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these bulbs produce glare for other drivers?\u003c\/h3\u003e\n\u003cp\u003eThe 360° board and precise chip placement are intended to replicate halogen beam geometry and avoid scatter that causes glare. Proper alignment in the headlight housing remains important to achieve an optimum cutoff and to prevent dazzling oncoming traffic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUltra-thin 0.079-inch board for focused, even beam distribution\u003c\/li\u003e\n  \u003cli\u003eDesigned to eliminate dark spots and reduce stray light that causes glare\u003c\/li\u003e\n  \u003cli\u003eAdjustment of aim may be necessary after installation for safest results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers who want a high-output, white LED upgrade that installs quickly and looks modern without major electrical work. Ideal for people replacing aging halogens, improving night visibility, or standardizing headlight color and brightness. It’s also suitable for DIY-minded car owners who prefer a near-OEM fit and robust cooling to keep bulb performance stable over many miles. If you drive a vehicle known to be sensitive to aftermarket LEDs, check compatibility or contact the seller for decoder recommendations before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are AUXITO 9005 bulbs plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These 9005\/HB3 LEDs are designed as a near 1:1 fit and install in minutes using the original connectors in most vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need additional parts for my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most cars require no extra parts. For a few sensitive models you may need a decoder; contact the seller for support if errors occur.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUXITO","offers":[{"title":"Default Title","offer_id":67584858390713,"sku":"B0GR9NZ9ND","price":167.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/auxito-9005-front-view.jpg?v=1790456660"},{"product_id":"gooloo-gt-truck-pro-10000a-64-000mah-jump-starter-65w-fast-charge-lifepo4-heavy-duty","title":"GOOLOO GT Truck PRO 10000A 64,000mAh Jump Starter – 65W Fast Charge, LiFePO4 Heavy-Duty","description":"\u003cp\u003e\u003cstrong\u003eThe GOOLOO GT Truck PRO is a heavy-duty 10000A jump starter with a 64000mAh battery and 65W fast charging designed to restart large 12V trucks and power multiple devices on the go.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for demanding conditions, the GT Truck PRO combines high peak amperage, long-lasting lithium iron phosphate cells, and fast recharge speeds to deliver reliable engine starts and versatile power for work sites, road trips, and outdoor adventures. It features reinforced safety systems, bright emergency lighting, and accessories to get you back on the road quickly while supplying power to phones, tablets, fridges, and more.\u003c\/p\u003e\n\n\u003ch3\u003eHow powerful is the GT Truck PRO for large vehicles?\u003c\/h3\u003e\n\u003cp\u003eThis unit delivers a peak current of 10,000A via eight automotive-grade LiFePO4 cells using GOOLOO’s JUMPCORE design, making it suitable for most 12V heavy trucks, construction machinery, pickups, and boats. The large-capacity battery provides many consecutive starts without recharge.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10,000A peak current tailored for heavy-duty 12V engines\u003c\/li\u003e\n  \u003cli\u003e64000mAh capacity supports up to ~80 vehicle starts per full charge\u003c\/li\u003e\n  \u003cli\u003eCompatible with pickups, off-road vehicles, motorcycles, and marine 12V systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast does it recharge and what devices can it power?\u003c\/h3\u003e\n\u003cp\u003eWith a 65W input, the GT Truck PRO recharges its 64000mAh pack in roughly 3.7 hours—about 30% faster than many competitors—so it’s ready again quickly after intensive use. Multiple outputs let you charge phones, tablets, drones, and run DC appliances like car fridges and air pumps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e65W fast charge fully replenishes battery in ~3.7 hours\u003c\/li\u003e\n  \u003cli\u003eUSB-A\/USB-C outputs for smartphones, tablets, and accessories\u003c\/li\u003e\n  \u003cli\u003eDC output supports car fridges, pumps and other 12V devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety features and cold-weather performance does it offer?\u003c\/h3\u003e\n\u003cp\u003eDesigned for harsh environments, the pack uses pure copper cables, a smart BMS chip, and UL94 V0 and RoHS–compliant components to protect against overloads, short circuits, and thermal stresses. It supports a forced-start function at ultra-low voltages and works across a wide temperature range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10-layer BMS protection plus thickened copper cables for stable current\u003c\/li\u003e\n  \u003cli\u003eCertified components (UL94 V0, RoHS) and automotive-grade cells\u003c\/li\u003e\n  \u003cli\u003eOperates between -40°C and 60°C and supports forced starts in cold conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it help during nighttime emergencies or roadside repairs?\u003c\/h3\u003e\n\u003cp\u003eThe GT Truck PRO includes an eight-LED light array with constant light, strobe, and SOS modes to illuminate work areas, warn traffic, or signal for help. The bright, multi-mode LED array increases visibility and safety when working at night or in low-light scenarios.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEight high-brightness LEDs with constant, strobe, and SOS functions\u003c\/li\u003e\n  \u003cli\u003eSOS mode gives long-distance visibility for emergency signaling\u003c\/li\u003e\n  \u003cli\u003eUseful for roadside repairs, campsite illumination, and rescue situations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The GOOLOO GT Truck PRO is aimed at professional drivers, fleet operators, construction crews, off-road enthusiasts, and anyone who needs dependable starting power for 12V heavy vehicles plus on-site charging for tools and devices. If you require a rugged, fast-recharging jump starter with strong safety systems and multi-device outputs for long trips or demanding work, this unit is engineered to meet those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the GT Truck PRO compatible with 24V vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The GT Truck PRO supports 12V systems only; it is not compatible with 24V vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many starts can I expect from one full charge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A full 64000mAh charge can provide up to about 80 starts for typical 12V engines, depending on engine size and condition.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GOOLOO","offers":[{"title":"Default Title","offer_id":67584858521785,"sku":"B0GPWB34N7","price":534.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gooloo-gt-truck-pro-front-view.jpg?v=1790456682"},{"product_id":"newdeli-deutsch-dt-connector-kit-636pcs-2-3-4-6-8-12-pin-housings-with-closed-barrel-crimper-pin-removal-tool-14-20awg-sealed","title":"Newdeli Deutsch DT Connector Kit — 636PCS 2\/3\/4\/6\/8\/12-Pin Housings with Closed-Barrel Crimper \u0026 Pin Removal Tool, 14–20AWG Sealed","description":"\u003cp\u003e\u003cstrong\u003eComplete 636-piece Deutsch DT connector kit with multi-pin housings, high-conductivity solid contacts, a closed-barrel crimper and a pin removal tool for reliable, sealed automotive electrical connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Newdeli kit bundles a wide range of DT-series Deutsch connectors (2, 3, 4, 6, 8 and 12-pin) plus the tools needed to crimp and service them. Housings are molded from flame-retardant nylon and paired with copper-alloy solid contacts sized for 14–20 AWG wire, delivering corrosion resistance and stable electrical performance in demanding environments. The included Deutsch-style crimper applies the correct closed-barrel profile, while the pin removal tool allows safe extraction of pins and wedge locks from multiple Deutsch series.\u003c\/p\u003e\n\n\u003ch3\u003eWhich connector sizes and mounting options does this set include?\u003c\/h3\u003e\n\u003cp\u003eThe kit provides DT-series housings across common pin counts for wiring harnesses and sensor connections. Housings support in-line and flange mounting, plus configurations suited for panel or PCB integration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded pin counts: 2, 3, 4, 6, 8 and 12-pin DT housings\u003c\/li\u003e\n  \u003cli\u003eMounting styles: in-line and flange types for varied installations\u003c\/li\u003e\n  \u003cli\u003eCompatibility with DT family connectors used in automotive and industrial harnesses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the crimper and contacts ensure a durable electrical join?\u003c\/h3\u003e\n\u003cp\u003eThe Newdeli closed-barrel crimp tool forms the proper 4-indent, 8-impression profile for sealed Deutsch pins, producing a consistent mechanical and electrical connection. Contacts are copper-alloy solid pins that offer improved conductivity and thermal performance versus common brass pins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCrimper range: sized for 14–20 AWG closed-barrel pins\u003c\/li\u003e\n  \u003cli\u003eCrimp profile: multi-indent\/ impression pattern for secure crimps\u003c\/li\u003e\n  \u003cli\u003eContact rating: solid copper-alloy contacts rated for continuous loads typical of automotive circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these connectors handle harsh conditions like moisture and vibration?\u003c\/h3\u003e\n\u003cp\u003eYes — the housings are molded from flame-retardant PA66 and use sealed designs to keep contaminants out. The wedge-lock and snap features hold contacts firmly in place so vibration and salt spray are less likely to compromise the connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterials: flame-retardant nylon (PA66) housings\u003c\/li\u003e\n  \u003cli\u003eProtection: sealed, dustproof and corrosion-resistant construction\u003c\/li\u003e\n  \u003cli\u003eRetention: wedge lock and snap design to prevent contact backout\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools are included and which Deutsch series are supported for pin removal?\u003c\/h3\u003e\n\u003cp\u003eAlong with the crimper, the kit contains a pin removal tool that releases wedge latches and extracts pins from multiple Deutsch connector families. This makes servicing or re-pinning harnesses simpler and safer than improvised methods.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded tools: closed-barrel crimper and multi-series pin removal tool\u003c\/li\u003e\n  \u003cli\u003eRemoval compatibility: supports DT, DTP, DTM, DRB, DTV and STRIKE series\u003c\/li\u003e\n  \u003cli\u003eServiceability: designed to extract pins without housing damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Newdeli kit is aimed at technicians, fabricators and DIYers who build or repair automotive, marine, off-road, industrial and motorsport wiring harnesses. It suits anyone needing a comprehensive assortment of sealed DT connectors, reliable closed-barrel crimps and a safe way to remove or replace pins during assembly or maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire sizes work with these Deutsch contacts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The solid contacts accept 14–20 AWG wires and are sized for the included closed-barrel pins.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the crimper compatible with other Deutsch closed-barrel pins?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Newdeli closed-barrel crimper fits standard 14–20 AWG Deutsch-style closed-barrel pins.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Newdeli","offers":[{"title":"Default Title","offer_id":67584858456249,"sku":"B0F2HNY9XM","price":342.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/newdeli-front-view-connectors-kit.jpg?v=1790456680"},{"product_id":"wolfbox-2000a-12v-jump-starter-with-air-compressor-2000a-peak-150-psi-inflator-usb-power-bank","title":"WOLFBOX 2000A 12V Jump Starter with Air Compressor — 2000A Peak, 150 PSI Inflator, USB Power Bank","description":"\u003cp\u003e\u003cstrong\u003eThe WOLFBOX 2000A is a compact 12V jump starter that combines a high‑current car booster, a cordless 150 PSI air compressor, and a USB power bank in one rugged unit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen roadside trouble strikes, you want a single, portable tool that restarts your vehicle, reinflates tires, and powers devices. The WOLFBOX 2000A packs a 37Wh battery delivering up to 2000A peak current, a built‑in rapid inflator with real‑time pressure sensing, and USB charging ports — all in a weather‑resistant housing that fits in trunks or backpacks. It’s designed to support gasoline engines up to 5L and diesel up to 3L and includes a 200‑lumen LED for emergencies.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will the WOLFBOX 2000A get my car started?\u003c\/h3\u003e\n\u003cp\u003eThe unit supplies a high peak current to jump a dead 12V battery and can perform multiple jump starts on a single charge. It’s meant for quick boosts on small to mid‑sized engines and includes safety features to prevent reverse polarity and short circuits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePeak current up to 2000A for strong starting power\u003c\/li\u003e\n  \u003cli\u003eRated for up to 30 jump starts per full charge (typical small engines)\u003c\/li\u003e\n  \u003cli\u003eProtective clamps and built‑in safety circuitry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the integrated air compressor perform for everyday tire needs?\u003c\/h3\u003e\n\u003cp\u003eThe cordless air compressor offers fast inflation with automatic pressure monitoring and shutoff. It supports several preset modes and multiple units of measurement so you can inflate car, bike, or sports equipment without guesswork.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMax pressure 150 PSI and immediate tire pressure readout\u003c\/li\u003e\n  \u003cli\u003eInflates a 195\/65 R15 from 29 to 36 PSI in about one minute\u003c\/li\u003e\n  \u003cli\u003eFive modes: car, motorcycle, bicycle, ball, and custom; four units: PSI, BAR, KPA, kg\/cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use the WOLFBOX as a power bank for phones and tablets?\u003c\/h3\u003e\n\u003cp\u003eYes — the device doubles as a compact power bank with USB output and USB‑C input for recharging. It supports charging a wide range of electronics, making it useful on trips when outlets are unavailable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUSB‑C input 15W for faster recharging of the jump starter\u003c\/li\u003e\n  \u003cli\u003eUSB‑A output 12W suitable for phones, tablets, and small devices\u003c\/li\u003e\n  \u003cli\u003eSmall footprint makes it handy for camping or travel packs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the WOLFBOX 2000A reliable in extreme conditions and safe to use?\u003c\/h3\u003e\n\u003cp\u003eThe unit is engineered for durability and has passed multiple safety certifications. Thermal vents and protective electronics help it operate across a wide temperature range, and built‑in lighting and alarm modes assist during roadside incidents.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCertified by UL, FCC, CE, and CA65 for safety and compliance\u003c\/li\u003e\n  \u003cli\u003eOperates from -4°F to 140°F, with side vents for heat dissipation\u003c\/li\u003e\n  \u003cli\u003e200‑lumen LED with distress, strobe, and steady beam options\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The WOLFBOX 2000A is aimed at drivers, cyclists, and outdoor enthusiasts who want a single, reliable device for jump starting, inflating, and charging. It’s particularly useful for commuters, weekend adventurers, and anyone who prefers to carry compact emergency gear rather than multiple separate tools. If you need a versatile, safety‑minded portable power solution that handles jump starts and inflations while doubling as a power bank, this model is designed to meet those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many jump starts per charge can I expect?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A full charge can provide roughly up to 30 jump starts on small gasoline or diesel engines, depending on conditions and engine size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the compressor stop automatically when desired PSI is reached?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The integrated compressor measures pressure in real time and automatically stops at your set PSI for accurate inflation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WOLFBOX","offers":[{"title":"Default Title","offer_id":67584858554553,"sku":"B0GMGMTNZ5","price":238.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wolfbox-front-view-with-clamps.jpg?v=1790456682"},{"product_id":"shichu-130-amp-alternator-for-honda-odyssey-2014-2017-3-5l-v6-direct-fit-6-groove-pulley","title":"SHICHU 130 Amp Alternator for Honda Odyssey 2014-2017 3.5L V6 — Direct-Fit, 6-Groove Pulley","description":"\u003cb\u003eSHICHU 130 Amp Alternator compatible with 2014–2017 Honda Odyssey 3.5L V6 provides a direct-fit, high-output 12V replacement designed to restore charging system performance.\u003c\/b\u003e\n\nReplacing a worn alternator with the SHICHU 130 Amp unit brings back steady electrical power for your Odyssey's battery and accessories. This aftermarket alternator is built to match the 2014–2017 Odyssey 3.5L V6 specifications, offering 130 amps of charging capacity, a clockwise rotation, and a six-groove pulley to fit factory belt systems. It arrives with multiple cross-reference part numbers to help you confirm compatibility and includes a one-year unlimited-mileage quality guarantee backed by responsive customer support.\n\n\u003ch3\u003eWill this alternator fit my 2014–2017 Odyssey 3.5L V6?\u003c\/h3\u003e\n\u003cp\u003eYes—this SHICHU alternator is listed as compatible with Odyssey models equipped with the 3.5L V6 engine from 2014 through 2017. Use the provided part numbers to double-check fitment against your vehicle’s OEM part number or VIN.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible model years: 2014, 2015, 2016, 2017\u003c\/li\u003e\n  \u003cli\u003eEngine: 3.5L V6\u003c\/li\u003e\n  \u003cli\u003eCross-reference part numbers: 11775, 400-52718R, 31100-RV0-A11, 31100-RV0-A11RM, 31100RV0A11RM, 104211-8520, 1042118520\u003c\/li\u003e\n  \u003cli\u003eRecommendation: verify your vehicle’s OEM part number before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key technical specifications and electrical capabilities?\u003c\/h3\u003e\n\u003cp\u003eThe SHICHU alternator delivers 130 amps at 12 volts—suitable for powering factory electronics and common accessory loads. Its clockwise rotation and six-groove pulley match many original equipment designs, helping ensure correct belt alignment and reliable mechanical fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAmperage: 130 Amp charging capacity\u003c\/li\u003e\n  \u003cli\u003eVoltage: 12.0 Volt system compatibility\u003c\/li\u003e\n  \u003cli\u003eRotation: Clockwise shaft rotation\u003c\/li\u003e\n  \u003cli\u003ePulley: 6-groove pulley for OEM belt compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what support is available?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same mounting points as the OEM alternator; many DIYers with basic tools can complete the swap in a few hours. If you encounter fitment questions or performance concerns, SHICHU offers a one-year quality guarantee and customer service response within normal business hours.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design uses factory mounting locations\u003c\/li\u003e\n  \u003cli\u003eMatches OEM pulley groove count and rotation for easier belt alignment\u003c\/li\u003e\n  \u003cli\u003eOne-year unlimited-mileage quality guarantee included\u003c\/li\u003e\n  \u003cli\u003eCustomer support typically replies within 8 working hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering to avoid returns?\u003c\/h3\u003e\n\u003cp\u003eConfirm the alternator part number listed on your vehicle's old unit or in dealer parts documentation to ensure exact match. Compare pulley grooves, electrical plug configurations, and mounting points to the SHICHU unit’s specifications to prevent fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare OEM part number to cross-reference list provided\u003c\/li\u003e\n  \u003cli\u003eVerify pulley groove count and rotation direction on your vehicle\u003c\/li\u003e\n  \u003cli\u003eCheck electrical connector type and mounting bracket geometry\u003c\/li\u003e\n  \u003cli\u003eWhen in doubt, consult the manufacturer or a trusted mechanic\u003c\/li\u003e\n\u003c\/ul\u003e\n\nThis SHICHU 130 Amp alternator is aimed at drivers and technicians who need a reliable, cost-effective replacement for a failing charging unit on 2014–2017 Honda Odyssey 3.5L V6 models. It’s suitable for DIY mechanics comfortable with alternator swaps and for service shops that require a high-output direct-fit part backed by a one-year quality promise. Always verify your vehicle’s OEM part number and inspect pulleys and electrical interfaces before purchase to ensure trouble-free installation.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this alternator a direct replacement for my 2015 Odyssey 3.5L V6?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is listed as compatible with 2014–2017 Odyssey 3.5L V6 models; verify your OEM part number against the cross-reference list first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty or support comes with the SHICHU alternator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It includes a one-year unlimited-mileage quality guarantee and customer support with responses within about 8 working hours.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SHICHU","offers":[{"title":"Default Title","offer_id":67584858685625,"sku":"B0D93D5XGC","price":251.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/shichu-alternator-front-view.jpg?v=1790456679"},{"product_id":"ditrio-16-pod-five-sided-rgb-rock-lights-for-trucks-jeeps-multi-color-ip67-waterproof-app-remote-control","title":"DITRIO 16‑Pod Five‑Sided RGB Rock Lights for Trucks \u0026 Jeeps — Multi‑Color, IP67 Waterproof, App + Remote Control","description":"\u003cp\u003e\u003cstrong\u003eDITRIO 16‑pod five‑sided RGB rock lights are a waterproof underglow kit that delivers full 360° illumination, independent left\/right zone control, music sync, and brake‑alert brightness for trucks, Jeeps, UTVs, ATVs, SUVs, and golf carts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese rock lights combine a patented five‑sided lens design with 16 high‑output pods to produce much brighter, more uniform underbody illumination than conventional strip or single‑face lamps. You get 16 million colors, hundreds of chase patterns, dual‑zone app control, and two RF remotes—plus rugged IP67 waterproofing and battery protection built into the wiring for easy, reliable installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights improve visibility off‑road and at night?\u003c\/h3\u003e\n\u003cp\u003eThe five‑sided pods cast light downward and outward to illuminate rocks, ruts, and obstacles that narrow beams miss. Their increased output reduces dark spots under the vehicle and makes ground details easier to judge when navigating rough terrain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e360° coverage from each pod for consistent under‑vehicle lighting\u003c\/li\u003e\n  \u003cli\u003e3× brighter output versus standard single‑faced LEDs\u003c\/li\u003e\n  \u003cli\u003eShock‑resistant housings and sealed connectors for rough conditions\u003c\/li\u003e\n  \u003cli\u003eAutomatic bright red brake mode to increase rear visibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat control options and lighting effects are available?\u003c\/h3\u003e\n\u003cp\u003eChoose from app control or the included RF remotes to change colors, brightness, and dynamic modes. The DITRIO app supports independent left\/right zone editing so you can set different colors and patterns for each side without juggling multiple devices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16 million RGB colors and 213 chase modes via the app\u003c\/li\u003e\n  \u003cli\u003eMusic sync for lights that pulse to the beat of your phone audio\u003c\/li\u003e\n  \u003cli\u003eTwo RF remotes (17‑key and 4‑key) with ~10 m (32.8 ft) range\u003c\/li\u003e\n  \u003cli\u003eIndependent dual‑zone control inside the app—no extra remotes required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what safety features are included?\u003c\/h3\u003e\n\u003cp\u003eDITRIO designs the kit with dual‑path series wiring that simplifies routing and reduces clutter, making it accessible for DIY installers. The system includes an on\/off switch, a safety fuse, and battery protection to prevent drain or shorts when the vehicle is parked.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual‑path wiring for cleaner runs and faster mounting\u003c\/li\u003e\n  \u003cli\u003eBuilt‑in on\/off switch to avoid unintended battery drain\u003c\/li\u003e\n  \u003cli\u003eInline safety fuse to protect from electrical faults\u003c\/li\u003e\n  \u003cli\u003eIP67 rated connectors and screw‑on caps for weatherproofing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights withstand wet, muddy, or extreme conditions?\u003c\/h3\u003e\n\u003cp\u003eYes — the pods and connectors are sealed to IP67 specifications so they resist water, mud, snow, and dust commonly encountered during off‑roading. Rugged construction and secure mounts help ensure reliable performance over many seasons.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed screw‑on caps over connectors to prevent corrosion\u003c\/li\u003e\n  \u003cli\u003eIP67 rating for temporary immersion and heavy spray protection\u003c\/li\u003e\n  \u003cli\u003eDurable housings built to resist vibration and debris impact\u003c\/li\u003e\n  \u003cli\u003eDesigned for vehicles exposed to changing outdoor conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e DITRIO’s 16‑pod five‑sided RGB rock lights are made for off‑road drivers, weekend overlanders, show vehicle owners, and anyone who wants bright, dependable underglow with flexible color control. If you need clear ground illumination for safer night riding, eye‑catching customizable effects for events, or a weatherproof kit that’s straightforward to install, this set balances safety, style, and durability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these rock lights work with my phone?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The DITRIO app supports iOS 7+ and Android 4.3+ over Bluetooth for full color, zone, and music control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the pods waterproof for off‑road use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The lights and connectors are IP67 rated with sealed caps, built to resist rain, mud, and temporary immersion.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DITRIO","offers":[{"title":"Default Title","offer_id":67584858751161,"sku":"B0DHKZX58J","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ditrio-front-view-installed-underglow.jpg?v=1790456681"},{"product_id":"ksp-performance-forged-upper-control-arm-for-f-150-2004-2020-2-4in-lift-cnc-aluminum-with-oem-style-rubber-bushings","title":"KSP PERFORMANCE Forged Upper Control Arm for F-150 2004–2020 2–4in lift, CNC aluminum with OEM-style rubber bushings","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE forged one-piece aluminum upper control arm with OEM-style rubber bushings for Ford F-150 (2004–2020) provides a durable, bolt-on replacement designed to work with 2–4\" leveling kits.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your truck has wheel rub, incorrect camber, or you’re fitting a leveling\/lift kit, the upper control arm (UCA) plays a key role in restoring suspension geometry and ride quality. This KSP PERFORMANCE UCA is CNC-machined from a single forged aluminum forging, finished with a protective dust tower, and fitted with OE-style rubber bushings to absorb road vibrations. It serves as a long-lasting aftermarket alternative to welded steel arms while remaining compatible with common replacement parts and service procedures.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this UCA improve alignment and reduce tire rub?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn or undersized factory UCAs with a properly sized forged arm repositions the upper mounting point and restores correct camber and caster ranges. That helps eliminate tire contact at the wheel well when you’ve added a 2–4\" leveling kit, and it creates a more predictable steering feel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecise CNC machining ensures accurate geometry for restored wheel alignment.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common replacement components (MOOG K201804, DORMAN BCK74479PR, OE numbers listed).\u003c\/li\u003e\n  \u003cli\u003eOEM-style rubber bushings absorb vibration, reducing noise and harshness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the KSP PERFORMANCE design more durable than stock arms?\u003c\/h3\u003e\n\u003cp\u003eThis UCA is made from a single forged aluminum blank rather than welded steel sections, which eliminates corrosion-prone seams and improves fatigue life. The ball joint receives a protective cover and a taller \"tower\" dust shield that keeps grit and moisture away from moving parts, extending service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece forged aluminum resists rust and fatigue compared to welded arms.\u003c\/li\u003e\n  \u003cli\u003ePre-installed, extended dust boot and tower-shaped cover reduce contaminant ingress.\u003c\/li\u003e\n  \u003cli\u003eBall joint protective cover and CNC tolerance control improve longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what should I expect during fitment?\u003c\/h3\u003e\n\u003cp\u003eThe KSP upper control arm is engineered as a 100% bolt-on replacement and is intended to be installed with basic tools in a typical home garage. Most independent installers or experienced DIYers can complete both sides in about 4–5 hours, including torqueing to factory specifications and performing a post-install alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-on fit for Ford F-150 models 2004–2020 with appropriate orientation for leveling kits.\u003c\/li\u003e\n  \u003cli\u003eEstimated install time: 4–5 hours for one person with standard tools.\u003c\/li\u003e\n  \u003cli\u003eFollow up with a full wheel alignment after installation for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I be able to service or replace bushings and ball joints later?\u003c\/h3\u003e\n\u003cp\u003eYes—the arm uses OE-style rubber bushings and common ball joint fittings so replacement components are widely available. That makes routine servicing convenient and keeps long-term ownership costs lower than some proprietary designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses OE-compatible rubber bushings for easy parts sourcing.\u003c\/li\u003e\n  \u003cli\u003eReplacement part references included to match MOOG and Dorman equivalents.\u003c\/li\u003e\n  \u003cli\u003eAfter-sales support offers accessory replacement within one year for qualifying quality issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This KSP PERFORMANCE forged UCA is aimed at F-150 owners (2004–2020) who are installing 2–4\" leveling kits, replacing worn suspension arms, or seeking a rust-resistant upgrade over OEM welded steel parts. It’s appropriate for DIY mechanics, off-road enthusiasts, and professional shops that want a durable, serviceable arm that accepts common replacement bushings and ball joints.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this UCA fit my Ford F-150 with a 3\" leveling kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The KSP UCA is designed to work with 2–4\" leveling kits on Ford F-150s from 2004–2020, restoring proper suspension geometry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are replacement bushings and ball joints available?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It uses OE-style rubber bushings and common ball joint fittings; compatible references include MOOG K201804 and DORMAN BCK74479PR.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584859013305,"sku":"B0F9F2FZ3S","price":749.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-uca-front-view.jpg?v=1790456706"},{"product_id":"ksp-performance-front-upper-control-arm-for-toyota-tacoma-2004-2023-2-4-lift-forged-t6-aluminum-greasable-ball-joint","title":"KSP PERFORMANCE Front Upper Control Arm for Toyota Tacoma 2004–2023 2–4\" Lift — Forged T6 Aluminum, Greasable Ball Joint","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE front upper control arm is a one-piece forged aluminum adjustable UCA engineered to replace worn factory arms and correct suspension geometry on 2–4\" lifted Toyota Tacoma, Hilux, and Fortuner models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis upgrade combines corrosion-resistant T6 forged aluminum, a greasable and zinc-nickel coated ball joint, and premium polyurethane bushings to deliver longer life, improved handling, and easier serviceability than stock arms. The arm is designed for lifted applications and provides greater articulation and correct ball-joint angle for common 2–4\" lifts. It fits a wide range of Toyota trucks and SUVs across multiple model years while avoiding welded weak points that invite fatigue and rust.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this control arm improve suspension performance after a 2–4\" lift?\u003c\/h3\u003e\n\u003cp\u003eThe KSP UCA restores proper ball-joint geometry and increases articulation compared with the original factory arm, reducing binding and uneven tire wear caused by altered angles. The stronger forged aluminum construction resists bending under load, and the polyurethane bushings give firmer feedback with less deflection than rubber.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrects ball-joint angle for lifted front-end geometry\u003c\/li\u003e\n  \u003cli\u003eForged T6 aluminum resists bending and fatigue better than stamped steel\u003c\/li\u003e\n  \u003cli\u003ePolyurethane bushings improve steering response and reduce noise\u003c\/li\u003e\n  \u003cli\u003eIncreased range of motion for off-road articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the ball joint and serviceability different from OEM options?\u003c\/h3\u003e\n\u003cp\u003eKSP supplies a greasable metal-to-metal ball joint with zinc-nickel coating for corrosion resistance and a dust cover plus a protective tower boot to keep contaminants out. The greasable socket lets you flush out debris and replenish lubricant, extending service intervals compared with sealed or cheaper polymer joints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGreasable joint for routine maintenance and longer life\u003c\/li\u003e\n  \u003cli\u003eZinc-nickel coated pin for improved rust resistance\u003c\/li\u003e\n  \u003cli\u003eProtective dust boot and KSP cover to keep contaminants away\u003c\/li\u003e\n  \u003cli\u003eMetal-to-metal design offers durable wear characteristics over POM joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these arms stand up to harsh conditions like salt, mud, and snow?\u003c\/h3\u003e\n\u003cp\u003eThe one-piece forged aluminum body is highly resistant to corrosion compared with welded or stamped steel arms, and the T6 alloy resists surface degradation from road salt and melting snow. Components that are exposed, such as the ball-joint pin, receive a zinc-nickel finish, and the bushings are polyurethane, which tolerates extreme temperatures better than rubber.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece forged design eliminates weld corrosion points\u003c\/li\u003e\n  \u003cli\u003eT6 aluminum won’t rust after exposure to salt or moisture\u003c\/li\u003e\n  \u003cli\u003eCoated ball-joint hardware minimizes corrosion-prone surfaces\u003c\/li\u003e\n  \u003cli\u003ePolyurethane bushings perform in a wider temperature range than rubber\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Toyota models and years will this control arm fit?\u003c\/h3\u003e\n\u003cp\u003eThis KSP front upper control arm is built to fit multiple Toyota platforms; always verify fitment against your vehicle’s exact model and drivetrain before purchase. Note that some model-year and 2WD variations require checking compatibility—PreRunner and 4x4 models are commonly supported across specific years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Toyota Tacoma: 2005–2015 (2nd gen), 2005–2023 PreRunner, 2015–2023 (3rd gen)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with most 2004–2015 Tacoma 2WD (except PreRunner)\u003c\/li\u003e\n  \u003cli\u003eFits Toyota Hilux: 2004–2015 (7th gen AN10\/20\/30) and 2015–2023 (8th gen AN120\/130)\u003c\/li\u003e\n  \u003cli\u003eFits Toyota Fortuner: 2004–2023\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This KSP PERFORMANCE upper control arm is aimed at Toyota owners who lifted their trucks 2–4\" and want a durable, serviceable upgrade to restore suspension geometry and improve handling. It suits off-road enthusiasts and daily drivers seeking a corrosion-resistant, maintenance-friendly solution with stronger materials than OE arms. Installers and DIYers who value clean fitment, greasable joints, and longer-lasting bushings will find this UCA a practical, cost-effective replacement for worn or inadequate stock components.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this arm with a 3\" lift on my 2016 Tacoma?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this KSP arm suits most 2–4\" lifts including a 3\" lift on 2016 Tacoma models when fitment matches PreRunner\/4x4 requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the ball joint require periodic greasing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the ball joint is greasable—regular lubrication extends life and reduces wear in harsh conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584859078841,"sku":"B0D4D93GKQ","price":676.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-front-upper-control-arm-front-view.jpg?v=1790456704"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/rl-cat-parts.jpg?v=1790180650","url":"https:\/\/redleafauto.ca\/collections\/bulbs-wipers-parts.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}