{"title":"Engine \u0026 Vehicle Sensors","description":"\u003cp\u003eOxygen, crankshaft, camshaft, ABS, TPMS, temperature and pressure sensors for accurate engine management.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"bosch-oxygen-lambda-sensor-0258017025-vehicle-specific-connector-ready-to-fit-oe-replacement","title":"Bosch oxygen (lambda) sensor 0258017025 — vehicle-specific connector, ready-to-fit OE replacement","description":"\u003cp\u003e\u003cstrong\u003eBosch 0258017025 is a ready-to-fit oxygen (lambda) sensor with a vehicle-specific connector that helps the engine control unit monitor exhaust oxygen and optimise the air–fuel mixture.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Bosch lambda sensor is designed as a direct-replacement part for compatible vehicles, combining Bosch’s OE-level testing and continuous development. It measures oxygen content in exhaust gases and sends voltage signals to the ECU so the engine management system can adjust fuel delivery for cleaner combustion and stable idling. The sensor comes installation-ready with a vehicle-specific connector to simplify fitment and reduce wiring conversions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Bosch lambda sensor improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe sensor provides real-time oxygen readings that the ECU uses to fine-tune the air–fuel ratio, supporting smoother running and consistent throttle response. While it does not change performance on its own, accurate feedback helps the engine operate closer to its designed efficiency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivers continuous oxygen-level data to the ECU for precise fuel metering.\u003c\/li\u003e\n  \u003cli\u003eSupports stable idling and reduced engine hesitation under load.\u003c\/li\u003e\n  \u003cli\u003eFactory-tested for OE-equivalent reliability and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this sensor easy to fit in my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe Bosch 0258017025 includes a vehicle-specific connector so it plugs into the existing wiring harness without splicing. It arrives ready-to-fit, reducing installation time and error compared with generic sensors that require adapter cables.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle-specific connector matches factory wiring for plug-and-play fitment.\u003c\/li\u003e\n  \u003cli\u003ePre-assembled wiring and connector lower installation steps and risk.\u003c\/li\u003e\n  \u003cli\u003eCompact design fits OEM mounting locations without modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is this Bosch oxygen sensor?\u003c\/h3\u003e\n\u003cp\u003eBosch applies the same functional and quality tests used for original equipment parts, ensuring the sensor withstands typical exhaust temperatures and contamination encountered in daily driving. Continuous product development keeps the design current with evolving engine systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTested to OE standards for performance and long-term stability.\u003c\/li\u003e\n  \u003cli\u003eMaterials chosen to resist heat and exhaust contaminants.\u003c\/li\u003e\n  \u003cli\u003eManufactured under Bosch quality controls and updated through ongoing R\u0026amp;D.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will I know this sensor fits my car?\u003c\/h3\u003e\n\u003cp\u003eFitment depends on make, model and year; the product is sold with a vehicle-specific connector suited to particular vehicle applications. Check compatibility lists or enter your vehicle details to confirm this part number matches your car’s requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePart number Bosch 0258017025 corresponds to specific vehicle applications.\u003c\/li\u003e\n  \u003cli\u003eConfirm fitment using VIN, year, make and model or OEM cross-reference.\u003c\/li\u003e\n  \u003cli\u003eSupplier fitment tools or dealer data can verify correct connector type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bosch 0258017025 lambda sensor is aimed at vehicle owners, independent mechanics and service shops replacing a faulty oxygen sensor with a direct-fit, OE-quality component. It suits drivers seeking an installation-ready, tested sensor with a vehicle-specific connector to minimize installation time and ensure proper electrical mating with factory wiring harnesses.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Bosch 0258017025 a direct replacement part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s a ready-to-fit, OE-tested lambda sensor with a vehicle-specific connector for direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the sensor myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If you have basic tools and access to the sensor location, installation is straightforward thanks to the vehicle-specific connector.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":67584911966393,"sku":"B00BL6M5T6","price":184.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bosch-lambda-sensor-front-view.jpg?v=1790458749"},{"product_id":"delphi-mass-air-flow-sensor-af10043-direct-fit-maf-sensor-oe-calibrated-for-stable-idle-and-throttle-response","title":"Delphi Mass Air Flow Sensor AF10043 — Direct-Fit MAF Sensor, OE-Calibrated for Stable Idle and Throttle Response","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi AF10043 Mass Air Flow Sensor precisely measures incoming air to help the engine control module achieve the correct air–fuel balance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Delphi AF10043 (MAF sensor) provides accurate airflow data that the engine control unit uses to calculate fuel injection and timing. Built on decades of OE sensor experience, this unit is engineered and tested to match original specifications, restoring smoother idling, consistent throttle response, and predictable drivability when a failing sensor causes rough running or drivability faults.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the AF10043 improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe AF10043 supplies the ECU with consistent, stable airflow readings so fuel delivery and ignition timing stay synchronized with actual intake conditions. Better air measurement helps maintain efficient combustion and reduces the guesswork the ECU would otherwise have to do.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision sensing element calibrated to OE tolerances\u003c\/li\u003e\n  \u003cli\u003eStable signal output across common temperature ranges\u003c\/li\u003e\n  \u003cli\u003eReduces misfires, rough idle, and fuel trim errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the Delphi AF10043 easy to install and replace?\u003c\/h3\u003e\n\u003cp\u003eDelphi designs this MAF sensor as a direct-fit replacement where applicable, minimizing installation steps and avoiding unnecessary part swaps. Most installations require basic hand tools and plug-and-play electrical connection, following vehicle-specific procedures for reset or relearn if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplication-specific form factor for proper fit\u003c\/li\u003e\n  \u003cli\u003eStandard electrical connector compatible with OE harnesses\u003c\/li\u003e\n  \u003cli\u003eInstallation usually performed without intake disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and testing back the AF10043?\u003c\/h3\u003e\n\u003cp\u003eDelphi leverages long-standing OE expertise to design and test the AF10043 for reliable operation under varied driving conditions. Components are validated for signal stability and thermal performance to provide dependable service life comparable to factory equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered sensing elements for temperature resilience\u003c\/li\u003e\n  \u003cli\u003eCalibrated and bench-tested to match original outputs\u003c\/li\u003e\n  \u003cli\u003eManufacturing quality controls derived from OE production\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill replacing a failing MAF sensor fix driveability symptoms?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or faulty MAF sensor with a correct Delphi AF10043 often resolves symptoms caused by inaccurate airflow data, such as unstable idle, hesitation, or diagnostic trouble codes related to air metering. However, a full diagnosis should confirm no other faults exist before replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommonly corrects air-fuel ratio related drivability issues\u003c\/li\u003e\n  \u003cli\u003eHelps clear air metering-related trouble codes when sensor is root cause\u003c\/li\u003e\n  \u003cli\u003eMay require ECU relearn or battery disconnect to refresh fuel trims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi AF10043 is aimed at technicians and vehicle owners seeking a direct-fit, OE-grade replacement MAF sensor to restore accurate airflow measurement. It's suitable for garage repairs, professional workshops, and do-it-yourselfers who want a robust, tested sensor that matches factory performance and simplifies installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote: Delphi products purchased through certain marketplaces may have different warranty terms; review seller warranty details at purchase.\u003c\/em\u003e\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know if the MAF sensor is faulty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Symptoms include rough idle, hesitation, poor fuel economy, or trouble codes for air metering. Run diagnostics to confirm before replacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does AF10043 require calibration after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installations need no special calibration, though an ECU relearn or battery disconnect may help restore optimal fuel trims.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67585036812473,"sku":"B000CGFHBY","price":234.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-af10043-front-view.jpg?v=1790464511"},{"product_id":"dngbymx-upstream-nox-sensor-for-2013-2018-dodge-ram-6-7l-cummins-direct-fit-oem-equivalent","title":"Dngbymx Upstream NOx Sensor for 2013–2018 Dodge Ram 6.7L Cummins — Direct-Fit, OEM-Equivalent","description":"\u003cstrong\u003eUpstream NOx Sensor for 2013–2018 Dodge Ram 2500\/3500\/4500\/5500 (6.7L Cummins) — a direct-fit replacement that restores NOx monitoring and resolves common fault codes.\u003c\/strong\u003e\n\n\u003cp\u003eIf your 6.7L Cummins-equipped Dodge Ram is showing emissions-related fault codes, poor fuel-management messages, or a persistent check-engine light, a worn upstream NOx (nitrogen oxide) sensor is a frequent culprit. This Dngbymx upstream NOx sensor is engineered to match fitment and performance for 2013–2018 Ram 2500, 3500, 4500, and 5500 trucks, offering an affordable, tested alternative to OEM units.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this upstream NOx sensor affect my truck’s emissions monitoring?\u003c\/h3\u003e\n\u003cp\u003eThe upstream NOx sensor measures oxide levels in exhaust gases before aftertreatment, feeding data to the ECU for emissions control and regeneration strategies. Replacing a failing sensor restores accurate readings so the engine and emissions systems can operate within designed parameters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonitors NOx levels before the SCR catalyst for precise feedback.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent incorrect regeneration cycles and limp-home modes.\u003c\/li\u003e\n  \u003cli\u003eReduces false diagnostic trouble codes related to NOx sensing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers is this sensor compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis upstream NOx sensor is built for 6.7L Cummins diesel models from 2013 through 2018 and fits heavy-duty Ram trucks listed in the title. It is offered as a replacement for a range of OEM references so you can match by part number during diagnosis.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Dodge Ram 2500, 3500, 4500, 5500 with 6.7L Cummins (2013–2018).\u003c\/li\u003e\n  \u003cli\u003eReplaces: 68210084AA, 904-6011, 904-6030, 5WK9, 6742B, 5WK96742, 5WK96742B.\u003c\/li\u003e\n  \u003cli\u003eOther cross-refs: 4326873, 2872948, A0415S170 for easier parts matching.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat causes NOx sensors to fail and how does this unit address those problems?\u003c\/h3\u003e\n\u003cp\u003eNOx sensors endure harsh exhaust conditions—soot, moisture, and mechanical stress can degrade sensing elements and wiring. The Dngbymx sensor uses durable materials and factory testing to resist common failure modes and help restore reliable emissions readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoot buildup and contamination are common failure triggers—this unit is designed for easy cleaning and reliable response.\u003c\/li\u003e\n  \u003cli\u003eSealed connectors and protective sheathing minimize water intrusion and cable wear.\u003c\/li\u003e\n  \u003cli\u003ePre-shipment material and vehicle tests aim to ensure consistent performance on installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect during replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic under-hood and exhaust work: remove the old upstream sensor and install this direct-fit replacement in the same location. No special tuning or programming is typically required; clear the codes after replacement and verify proper system operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement—no modifications or custom adapters needed.\u003c\/li\u003e\n  \u003cli\u003eTypical tools: appropriate socket\/oxygen sensor wrench and anti-seize for threads.\u003c\/li\u003e\n  \u003cli\u003eIf a code persists, check wiring harness and connector for damage before replacing again.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This upstream NOx sensor suits owners, mechanics, and fleet managers who need a reliable, cost-effective replacement for emissions monitoring on 2013–2018 Dodge Ram trucks with the 6.7L Cummins. It’s aimed at those troubleshooting NOx-related fault codes, restoring proper emissions system feedback, or performing routine maintenance on high-mileage diesels. For pre- and post-sale support, Dngbymx offers direct customer communication to help confirm fitment and answer installation questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor fit my 2015 Ram 3500 6.7L Cummins?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Dngbymx upstream NOx sensor is compatible with 2013–2018 Ram 3500 6.7L Cummins models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to program the vehicle after installing this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: In most cases no programming is required; clear fault codes after replacement and verify system operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dngbymx","offers":[{"title":"Default Title","offer_id":67585065877689,"sku":"B0BFDKPGY7","price":267.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dngbymx-front-view-upstream-nox-sensor.jpg?v=1790465844"},{"product_id":"thundermingo-mass-air-flow-sensor-for-toyota-pickup-4runner-v6-3-0l-1988-1995-direct-fit-replacement-22250-65010","title":"THUNDERMINGO Mass Air Flow Sensor for Toyota Pickup \u0026 4Runner V6 3.0L (1988–1995) — Direct-Fit Replacement 22250-65010","description":"\u003cp\u003e\u003cstrong\u003eTHUNDERMINGO Mass Air Flow Sensor 22250-65010 is a direct-fit replacement MAF for Toyota Pickup and 4Runner V6 3.0L (1988–1995) that measures incoming air to help your engine management system restore proper air\/fuel calculations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis THUNDERMINGO replacement MAF sensor is designed to match the original specifications for Toyota Pickup and 4Runner V6 3.0L models from 1988 through 1995. It replaces OEM numbers like 22250-65010, 197100-2920 and related cross-references. The unit installs in the intake tract between the air filter and the throttle body and uses a heated sensing element to detect the volume of air entering the engine so the ECU can adjust fueling accordingly.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this is the right MAF for my vehicle?\u003c\/h3\u003e\n\u003cp\u003eConfirm fitment by matching part numbers and engine size: this sensor fits V6 3.0L engines only and is not compatible with 2.4L models. Always compare the connector shape, mounting points, and OEM reference numbers to your existing sensor before purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces part numbers: 22250-65010, 197100-2920, 197100-4090, B6S7 13 210A\u003c\/li\u003e\n\u003cli\u003eFitment: Toyota Pickup \u0026amp; 4Runner 1988–1995, V6 3.0L\u003c\/li\u003e\n\u003cli\u003eNot compatible with 2.4L engines—verify engine displacement\u003c\/li\u003e\n\u003cli\u003eMatch connector and mounting configuration to your original unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the basic steps to test and troubleshoot the MAF sensor?\u003c\/h3\u003e\n\u003cp\u003eBegin with a visual inspection: check the harness and connector for corrosion, bent pins, or frayed wiring. If the sensor or wiring looks intact, clear stored fault codes and cycle power as a simple reset; if codes return, further electrical testing or replacement is warranted.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLocate unit between air filter and intake manifold\u003c\/li\u003e\n\u003cli\u003eInspect cable connector and pins for integrity\u003c\/li\u003e\n\u003cli\u003eClear fault codes, then perform three 3-minute power cycles\u003c\/li\u003e\n\u003cli\u003eFollow further diagnostic steps if faults persist\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I get installation instructions with this part?\u003c\/h3\u003e\n\u003cp\u003eThe product is supplied as shown—no printed installation manual is included. For safe and correct fitting, we recommend using trusted installation videos or a service manual, or having a trained technician perform the replacement if you’re unsure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eItem sold as pictured; no installation guide included\u003c\/li\u003e\n\u003cli\u003eSearch reputable online videos or OEM manuals for procedure\u003c\/li\u003e\n\u003cli\u003eIf uncertain, consult a professional mechanic\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect after installing the new MAF sensor?\u003c\/h3\u003e\n\u003cp\u003eOnce installed and any fault codes reset, your vehicle’s ECU should receive accurate airflow data, which helps restore correct fuel trim and idle. If previous symptoms were MAF-related, you may notice improved idle stability and throttle response; if problems remain, continue diagnostics on fuel, ignition, or vacuum systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReset codes after installation for accurate ECU adaptation\u003c\/li\u003e\n\u003cli\u003ePossible improvements in idle, throttle response, and drivability\u003c\/li\u003e\n\u003cli\u003ePersistent issues may require further engine diagnostics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This THUNDERMINGO MAF sensor is intended for owners and mechanics of Toyota Pickup and 4Runner vehicles powered by the V6 3.0L engine from 1988–1995 who need a direct-fit replacement for worn or faulty mass air flow sensors. It’s suitable for DIY installers with basic mechanical skills who will verify fitment and follow standard installation procedures, as well as shops seeking a cost-effective OEM-replacement part. If you are replacing a 2.4L engine MAF, or cannot verify the original part number and connector, consult a specialist before buying.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this MAF fit a Toyota 2.4L engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This THUNDERMINGO sensor fits only V6 3.0L engines from 1988–1995 and is incompatible with 2.4L models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are installation instructions included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No printed instructions are included. Use online installation videos, an OEM service manual, or a professional installer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"THUNDERMINGO","offers":[{"title":"Default Title","offer_id":67585072562361,"sku":"B0G2RXM2NG","price":212.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/thundermingo-maf-sensor-front-view.jpg?v=1790466037"},{"product_id":"denso-air-fuel-ratio-sensor-234-9049-wide-band-4-wire-direct-fit-for-lexus-scion-toyota","title":"Denso Air\/Fuel Ratio Sensor 234-9049 Wide-Band 4-Wire Direct-Fit for Lexus\/Scion\/Toyota","description":"\u003cp\u003e\u003cstrong\u003eDenso 234-9049 is a direct-fit wide-band air\/fuel ratio sensor engineered to replace the original unit on select Lexus, Scion and Toyota vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis OEM-grade sensor measures the proportion of air to fuel entering the engine and communicates that data to the engine control unit so fuel delivery stays optimized. Manufactured and tested to Denso's strict specifications, the 234-9049 comes with a 4-wire harness (20.08 inches) and is built for a first-time fit in the listed model years. It’s designed to help maintain fuel efficiency, support stable combustion across RPMs, and protect emissions system components like the catalytic converter when installed correctly.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this sensor affect my vehicle’s fuel efficiency?\u003c\/h3\u003e\n\u003cp\u003eBy providing precise, wide-band air\/fuel readings, the sensor helps the engine computer adjust injector pulses to keep the mixture near the target ratio. That reduces wasted fuel from overly rich or lean conditions and can improve mileage consistency under varied driving loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWide-band sensing for accurate mixture data across RPM ranges\u003c\/li\u003e\n  \u003cli\u003eDirect OE-style replacement minimizes tuning errors\u003c\/li\u003e\n  \u003cli\u003eConsistent signal reduces corrective fuel trims that waste fuel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Lexus, Scion, or Toyota model?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is specific to the model years listed for the Denso 234-9049; verify against your vehicle’s year and engine application before ordering. The product is intended as a like-for-like replacement for the vehicles noted, matching connector type and wiring length to avoid splicing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits select Lexus ES350, RX350 and RX450h model years\u003c\/li\u003e\n  \u003cli\u003eFits Scion tC and xB model years listed in the product details\u003c\/li\u003e\n  \u003cli\u003eFits various Toyota Avalon, Camry, Highlander, RAV4, Sienna and Solara years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical and electrical details I should know?\u003c\/h3\u003e\n\u003cp\u003eThe sensor is a four-wire wide-band device with a 20.08-inch harness designed to match original equipment interfaces. Package dimensions and weight are compact, and the component is manufactured in the United States to Denso’s OE-quality standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4-wire wide-band design for precise ratio monitoring\u003c\/li\u003e\n  \u003cli\u003eWiring harness length: 20.08 inches for proper reach\u003c\/li\u003e\n  \u003cli\u003eCompact packaging: 4.9 x 15.1 x 5.1 cm, weight ~0.128 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this sensor impact emissions system longevity?\u003c\/h3\u003e\n\u003cp\u003eAccurate air\/fuel data keeps combustion balanced, which reduces unburned hydrocarbons and minimizes stress on the catalytic converter. While sensor replacement alone won’t cure all emissions issues, restoring precise mixture control helps the entire emissions system operate as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps maintain optimum combustion to lower harmful byproducts\u003c\/li\u003e\n  \u003cli\u003eReduces risk of catalyst-overload from prolonged rich running\u003c\/li\u003e\n  \u003cli\u003eProvides stable signals that prevent long-term corrective fuel trims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and independent technicians who need a dependable OE-style replacement air\/fuel ratio sensor for compatible Lexus, Scion and Toyota vehicles. It’s especially suited for owners aiming to restore factory fuel economy and emissions performance without aftermarket calibration. Confirm your vehicle’s year and engine compatibility before purchase to ensure a correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Denso 234-9049 come with a wiring harness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it includes a 4-wire wiring harness approximately 20.08 inches long to match OE routing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this sensor on any year Camry?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this part fits specific Camry years listed; confirm compatibility with your exact model year.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":67585080295609,"sku":"B003YNHE86","price":273.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/denso-234-9049-front-view.jpg?v=1790466426"},{"product_id":"bosch-fuel-rail-pressure-sensor-for-dodge-ram-2500-3500-0281006325-oe-fit-fast-accurate-response","title":"Bosch Fuel Rail Pressure Sensor for Dodge Ram 2500\/3500 — 0281006325 OE-fit, Fast Accurate Response","description":"\u003cstrong\u003eThe BOSCH 0281006325 is an original-equipment fuel rail pressure sensor engineered to deliver precise, fast pressure readings for compatible Dodge Ram engines.\u003c\/strong\u003e\n\n\u003cp\u003eThis fuel rail pressure sensor from Bosch measures fuel pressure quickly and accurately, supplying essential data to the engine control unit so fuel delivery and injection timing stay within designed parameters. Built to the same specifications as the factory-installed part, the BOSCH 0281006325 combines rugged construction, thermal stability, and built-in circuit protection to protect your vehicle’s electronics while resisting vibration and heat common in engine bays.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor impact engine performance?\u003c\/h3\u003e\n\u003cp\u003eAccurate fuel rail pressure readings help the engine computer adjust injector pulse widths and timing, supporting efficient combustion and consistent engine response. When the ECU receives reliable sensor data, it can maintain correct air–fuel ratios and respond to load changes faster.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast-response sensing minimizes lag between pressure changes and ECU adjustments.\u003c\/li\u003e\n  \u003cli\u003ePrecision measurement aids stable idling and smoother throttle transitions.\u003c\/li\u003e\n  \u003cli\u003eOE-level compatibility ensures correct calibration for vehicles it was designed for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Dodge Ram 2500 or 3500?\u003c\/h3\u003e\n\u003cp\u003eThe BOSCH 0281006325 is manufactured to match the original equipment specifications used on select Dodge Ram 2500 (2003–2008) and Ram 3500 (2003–2007) models; however, fitment can vary by engine and configuration. Always verify compatibility against your vehicle’s year, engine code, and OEM part number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many 2003–2008 Ram 2500 and 2003–2007 Ram 3500 applications.\u003c\/li\u003e\n  \u003cli\u003eEngine variant affects fitment—use the vehicle fit checker or OEM reference.\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement design avoids modifications or additional adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes Bosch’s design reliable under harsh conditions?\u003c\/h3\u003e\n\u003cp\u003eBosch engineers these sensors with vibration resistance, thermal stability, and integrated circuit protection to maintain signal integrity in demanding engine environments. These design choices reduce failure modes related to heat cycles, rough roads, and electrical disturbances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust housing and mounting resist vibration-induced wear.\u003c\/li\u003e\n  \u003cli\u003eThermally stable materials preserve calibration across temperature swings.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in circuit protection helps prevent damage to the sensor and ECU.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this different from non-OE aftermarket sensors?\u003c\/h3\u003e\n\u003cp\u003eAs an Original Equipment (OE) part, the BOSCH 0281006325 matches the specifications and performance of the sensor originally installed by the vehicle manufacturer. Lower-cost aftermarket units may differ in calibration, response time, or longevity, which can affect drivability and diagnostic readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-level calibration aligns with manufacturer engine control strategies.\u003c\/li\u003e\n  \u003cli\u003eConsistent response times reduce the chance of drivability irregularities.\u003c\/li\u003e\n  \u003cli\u003eBosch quality standards target long-term reliability rather than only low upfront cost.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians and owners maintaining or repairing compatible Dodge Ram 2500 and 3500 trucks who want a direct-replacement sensor built to factory specifications. It’s a good choice for anyone seeking a durable, fast-responding fuel rail pressure sensor that protects vehicle electronics and preserves original engine control behavior. Always confirm vehicle fitment details and engine type before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this the same sensor used by the manufacturer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The BOSCH 0281006325 is an OE-spec replacement made to match the original factory sensor's specifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm fitment for my Ram truck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle year, engine code and OEM part number against the fit checker or consult your VIN to verify compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":67585085145273,"sku":"B00YCL5I28","price":196.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bosch-fuel-rail-pressure-sensor-front-view.jpg?v=1790466648"},{"product_id":"denso-air-fuel-ratio-sensor-234-5010-wide-band-direct-fit-with-oe-style-harness-for-acura-honda-saturn","title":"Denso Air\/Fuel Ratio Sensor 234-5010 — Wide-Band Direct-Fit with OE-Style Harness for Acura Honda Saturn","description":"\u003cp\u003e\u003cstrong\u003eDenso 234-5010 is a direct-fit wide-band air\/fuel ratio sensor designed to restore accurate fuel trim control for specified Acura, Honda and Saturn models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Denso sensor replaces the factory unit with a precision-built wide-band element and factory-style harness to deliver rapid, repeatable oxygen sensing across the RPM range. Built and tested to OE standards, the 234-5010 helps the engine control module maintain optimal air\/fuel mixture for smoother running, more consistent fuel economy, and reduced emissions when compared to a failing sensor. Below you'll find clear answers to common buyer questions about compatibility, performance and installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this Denso 234-5010 sensor fit?\u003c\/h3\u003e\n\n\u003cp\u003eThe 234-5010 is matched to specific Acura, Honda and Saturn models from the mid-2000s. It is a direct replacement for the original equipment sensor on the listed vehicles and uses the same connector and wiring length to simplify installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAcura: 2003–2006 MDX, 2005–2008 RL, 2004–2008 TL\u003c\/li\u003e\n  \u003cli\u003eHonda: 2003–2007 Accord, 2005–2006 Odyssey, 2005–2008 Pilot, 2006–2008 Ridgeline\u003c\/li\u003e\n  \u003cli\u003eSaturn: 2004–2007 Vue\u003c\/li\u003e\n  \u003cli\u003eParts interchange numbers: 12581687, 12581688, 36531RCAA02, 36531RCAA01, 36531RDV004, 36531RDJA01, 36531RDMA01\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this wide-band sensor affect engine performance?\u003c\/h3\u003e\n\n\u003cp\u003eA wide-band air\/fuel ratio sensor gives the engine control unit a detailed, continuous reading of oxygen levels rather than a simple rich\/lean toggle. That lets the ECU adjust fuel delivery precisely through the rev range, improving drivability and helping maintain catalytic converter health when functioning correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMeasures air\/fuel ratios roughly from 12:1 to 19:1 for precise tuning\u003c\/li\u003e\n  \u003cli\u003eQuick-response planar zirconia element picks up oxygen changes rapidly\u003c\/li\u003e\n  \u003cli\u003eTarnish-proof platinum electrodes extend sensor life and stability\u003c\/li\u003e\n  \u003cli\u003eHelps the ECU refine fuel trims for steadier idle and throttle response\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical and electrical features I should know about?\u003c\/h3\u003e\n\n\u003cp\u003eThe 234-5010 comes with an 11.50-inch four-wire harness and is sized to match the OE unit for a first-time fit. Materials and construction focus on durability and consistent output so the sensor provides reliable data under normal operating conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFour-wire wide-band design with an 11.50\" wiring harness for direct connection\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions: approximately 5.75 x 2.19 x 1.88 inches; weight ~0.25 lb\u003c\/li\u003e\n  \u003cli\u003ePrecision-manufactured for OE-style fitment and connector compatibility\u003c\/li\u003e\n  \u003cli\u003eSupplied as a single unit (package quantity: 1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and are there tips for a reliable replacement?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is generally straightforward when replacing the same sensor type on compatible vehicles because Denso matches the OE connector and harness length. Use anti-seize sparingly on the threads if recommended, ensure the vehicle is cool, and clear any stored trouble codes after installation to allow the ECU to re-learn trims.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplace when engine is cool and follow OEM torque specs for the sensor\u003c\/li\u003e\n  \u003cli\u003eMinimal wiring modification typically required due to OE-style connector\u003c\/li\u003e\n  \u003cli\u003eClear diagnostic trouble codes after install and perform a short drive cycle\u003c\/li\u003e\n  \u003cli\u003eVerify compatibility with vehicle year\/model before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Denso 234-5010 is intended for owners or technicians servicing mid-2000s Acura, Honda, and Saturn vehicles who need a reliable, OE-quality wide-band air\/fuel ratio sensor. It suits anyone restoring proper fuel trim behavior, replacing a failed sensor, or maintaining emissions and fuel-efficiency performance with a direct-fit, manufacturer-tested component.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 234-5010 fit my 2005 Honda Pilot?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Denso 234-5010 is a direct-fit replacement for 2005–2008 Honda Pilot models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required beyond a sensor socket and basic hand tools; follow torque specs and ensure the engine is cool.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":67585088585913,"sku":"B00199DZT4","price":262.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/denso-234-5010-front-view.jpg?v=1790466849"},{"product_id":"holley-efi-100-psi-stainless-pressure-sensor-554-102-0-5-4-5v-linear-output-pigtail-connector","title":"Holley EFI 100 PSI Stainless Pressure Sensor 554-102 — 0.5–4.5V Linear Output, Pigtail Connector","description":"\u003cp\u003e\u003cstrong\u003eHolley EFI 554-102 is a 100 PSI stainless steel pressure sensor that delivers a linear 0.5–4.5V output for plug-and-play fuel or oil pressure monitoring with Holley EFI systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to complement Holley EFI controllers and aftermarket installations, this compact sensor converts mechanical pressure into a predictable electrical signal for accurate logging, real-time display, and closed-loop tuning. Constructed from stainless steel, it resists corrosion and is suitable for under-hood and exposed installations. The unit ships with a pigtail connector to simplify wiring and to support customized harness layouts when integrating into performance, street, or marine powerplants.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this sensor integrate with my Holley EFI system?\u003c\/h3\u003e\n\u003cp\u003eIntegration is straightforward: the 554-102 is designed to accept both fuel and oil pressure inputs and interfaces directly with Holley EFI inputs that expect a 0.5–4.5V sensor signal. No complex calibration is generally required beyond selecting the correct input type and scaling in your Holley controller.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect compatibility with Holley EFI pressure input channels\u003c\/li\u003e\n  \u003cli\u003eLinear output simplifies configuration and logging\u003c\/li\u003e\n  \u003cli\u003ePigtail connector allows easy connection to factory or custom harnesses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability features does it offer?\u003c\/h3\u003e\n\u003cp\u003eMade from stainless steel, the 554-102 resists corrosion and handles typical automotive and marine environments. Its electro-mechanical design provides a stable, linear voltage output across the 0–100 PSI range for reliable readings under varying conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel body for long-term durability\u003c\/li\u003e\n  \u003cli\u003e0.5V to 4.5V linear output for predictable scaling\u003c\/li\u003e\n  \u003cli\u003eRated to 100 PSI suitable for many fuel and oil systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I wire and configure the sensor for accurate readings?\u003c\/h3\u003e\n\u003cp\u003eThe sensor includes a pigtail connector to speed installation into existing harnesses; match the pigtail wires to your Holley EFI input wiring diagram. After physical connection, configure the Holley controller to the pressure sensor type and input scaling so the voltage-to-psi conversion is accurate in your displays and datalogging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse supplied pigtail for clean harness routing\u003c\/li\u003e\n  \u003cli\u003eSet the Holley input to sensor type and scale (0.5–4.5V = 0–100 PSI)\u003c\/li\u003e\n  \u003cli\u003eVerify readings at idle and under load to confirm calibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere is this sensor best used and what mounting considerations matter?\u003c\/h3\u003e\n\u003cp\u003eThe compact stainless body suits engine bays, fuel rails, and oil galleries where space and corrosion resistance matter. Mount it where it won’t suffer mechanical impact and where wiring can be routed away from extreme heat or moving parts to preserve longevity and signal integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for fuel pressure rails, oil lines, and test ports\u003c\/li\u003e\n  \u003cli\u003eInstall away from direct heat sources and chafe points\u003c\/li\u003e\n  \u003cli\u003eUse proper thread sealant as recommended for your application type\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Holley EFI 554-102 is aimed at performance enthusiasts, tuners, and shops that use Holley EFI controllers and need a dependable pressure input for closed-loop control, data logging, or dash display. It’s a practical choice for racers, street\/strip builds, and marine installations that require a compact, corrosion-resistant sensor with a clear linear voltage output and easy wiring options.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 554-102 compatible with non-Holley ECUs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, any ECU or gauge that accepts a 0.5–4.5V pressure input can use this sensor with proper wiring and scaling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the sensor come calibrated for 0–100 PSI?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The sensor provides a linear 0.5–4.5V output corresponding to 0–100 PSI; confirm scaling in your controller for exact readings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Holley EFI","offers":[{"title":"Default Title","offer_id":67585107558585,"sku":"B004IDQ2O8","price":346.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/holley-efi-pressure-sensor-front-view.jpg?v=1790467517"},{"product_id":"a-premium-camshaft-position-sensor-adjuster-magnet-kit-8-piece-set-for-mercedes-v6-v8-direct-fit-replacement-black","title":"A-Premium Camshaft Position Sensor \u0026 Adjuster Magnet Kit – 8‑Piece Set for Mercedes V6\/V8, Direct-Fit Replacement, Black","description":"\u003cp\u003e\u003cstrong\u003eA-Premium’s 8-piece kit includes direct-replacement camshaft position sensors and camshaft adjuster magnets engineered to restore accurate valve timing and sensor feedback on compatible Mercedes-Benz models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit bundles both camshaft position sensors and camshaft adjuster (VVT) magnets in one purchase, making it straightforward to address common timing-related faults on a wide range of Mercedes-Benz V6 and V8 engines. Each component is a direct-fit replacement that matches the original mounting points, terminal configuration, and reference numbers used on many 2005–2015 Mercedes-Benz C-, E-, S-, CLK-, CLS-, GL-, ML-, SL-, SLK- and R-class vehicles. The parts arrive in black plastic housings with blade terminals and are backed by A-Premium’s one-year unlimited-mileage guarantee.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Mercedes models and engines will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is specified for numerous Mercedes-Benz models from mid-2000s through early-2010s, covering several V6 and V8 displacements. Fitment includes many C-, E-, S-, SL-, SLK-, CLS-, CLK-, GL-, ML-, GLK-, and R-series cars with 3.0L–5.5L engines. Always cross-check the provided reference numbers and your vehicle’s OEM part numbers before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with C230, C250, C280, C300, C350 (2006–2012)\u003c\/li\u003e\n  \u003cli\u003eAlso fits E280, E300, E350, E550, S400, S550, SL550, SLK300\/280\/350\u003c\/li\u003e\n  \u003cli\u003eIncludes GL450\/GL550, GLK350, ML350\/ML450\/ML550, R350, G550\u003c\/li\u003e\n  \u003cli\u003eMatch against listed reference numbers (for example 2720510077, 0009050443, 0041530728)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical details and how do these parts install?\u003c\/h3\u003e\n\u003cp\u003eThe sensors and magnets are made with durable plastic housings, come in black, and use blade-type electrical terminals. Install is intended to be plug-and-play—mount at the intake and exhaust cam locations and reconnect the factory electrical connector. No modification should be necessary if the vehicle is among the listed fitments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLocation: intake and exhaust positions for both sensors and magnets\u003c\/li\u003e\n  \u003cli\u003eTerminal configurations: available in 2-pin and 3-pin variants\u003c\/li\u003e\n  \u003cli\u003eHousing: plastic, color: black; terminals: blade-style\u003c\/li\u003e\n  \u003cli\u003eInstallation: direct replacement; use OEM torque specs and proper alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will replacing these parts affect engine performance and diagnostics?\u003c\/h3\u003e\n\u003cp\u003eWorn or failed camshaft position sensors or adjuster magnets can trigger diagnostic trouble codes, rough idling, or hesitation. Replacing faulty components typically clears camshaft-related errors and restores precise timing signals to the ECU, improving drivability and preventing further timing-related issues. However, address only symptoms identified by a verified diagnosis.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResolves camshaft sensor error codes when faults are present\u003c\/li\u003e\n  \u003cli\u003eRestores accurate timing signals for ignition and fuel control\u003c\/li\u003e\n  \u003cli\u003eReduces hesitation or inconsistent idle caused by faulty sensors\u003c\/li\u003e\n  \u003cli\u003eWorks best when installed with proper diagnostic confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This A-Premium 8-PC kit is aimed at DIY mechanics, independent repair shops, and fleet technicians who maintain compatible Mercedes-Benz vehicles and need a reliable, cost-effective set of direct-fit camshaft position sensors and VVT adjuster magnets. It’s also useful for owners troubleshooting camshaft-related diagnostic codes who prefer to replace both sensors and magnets in one service to ensure consistent, OEM-style operation. Always verify vehicle compatibility and OEM part references before purchase, and follow safety procedures for engine service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both intake and exhaust sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 8-piece set includes sensors and adjuster magnets for intake and exhaust cam positions as direct replacements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is there a warranty with this A-Premium kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A-Premium provides a one-year unlimited-mileage guarantee on this camshaft sensor and adjuster magnet kit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67585111392441,"sku":"B0C7H8Y7P3","price":238.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-kit-front-layout.jpg?v=1790467671"},{"product_id":"denso-oxygen-air-fuel-sensor-234-9005-direct-fit-for-2001-2005-honda-civic-fast-response","title":"Denso Oxygen (Air\/Fuel) Sensor 234-9005 — Direct-Fit for 2001–2005 Honda Civic, Fast Response","description":"\u003cp\u003e\u003cstrong\u003eThe Denso 234-9005 is a direct-replacement air\/fuel ratio (oxygen) sensor engineered to restore accurate air–fuel monitoring and ensure correct engine management for specified Honda and Acura models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement sensor from Denso is built to the rigorous standards of original-equipment manufacturers, offering a precision fit and calibration that helps vehicles read air\/fuel ratios reliably across driving conditions. Designed for 2001–2005 Honda Civics, 2002–2004 Honda CR-Vs, and 2002–2004 Acura RSXs, the 234-9005 aims to match the original sensor’s performance so engine control modules receive the data they expect without modifications or reprogramming.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Denso 234-9005 improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eBy delivering accurate air\/fuel ratio readings to the engine control unit, this sensor helps the vehicle maintain the intended combustion balance across idle, cruise, and acceleration. Correct measurements help the ECU adjust injector timing and fuel delivery for smoother operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-built sensing element for consistent signal output\u003c\/li\u003e\n  \u003cli\u003eFast response time to changing throttle and load conditions\u003c\/li\u003e\n  \u003cli\u003eHelps maintain optimal combustion across RPM ranges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my vehicle and install easily?\u003c\/h3\u003e\n\u003cp\u003eDenso designs the 234-9005 as a first-time-fit replacement for the listed model years, matching OEM connectors and thread sizes. Installation is typically straightforward for any technician familiar with oxygen sensor replacement; many enthusiasts can perform the swap with basic tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit connector and thread—no splicing required\u003c\/li\u003e\n  \u003cli\u003eCompatible with Honda Civic (2001–2005), CR-V (2002–2004), Acura RSX (2002–2004)\u003c\/li\u003e\n  \u003cli\u003eCompact design for access in common engine layouts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and reliability features does this sensor offer?\u003c\/h3\u003e\n\u003cp\u003eDenso uses robust materials and manufacturing controls to replicate OE longevity and performance under heat, vibration, and exhaust contaminants. The sensor’s construction aims to resist common failure modes so it can deliver a stable signal over many miles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable housing and protective shielding against exhaust conditions\u003c\/li\u003e\n  \u003cli\u003eEngineered to resist contamination and thermal cycling\u003c\/li\u003e\n  \u003cli\u003eTested to meet strict OE performance and quality benchmarks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing a worn sensor affect fuel economy and emissions?\u003c\/h3\u003e\n\u003cp\u003eA functioning air\/fuel ratio sensor supports accurate fuel metering; when the sensor is out of spec, the engine may run rich or lean and burn more fuel. Installing a reliable sensor helps the ECU return to intended fueling strategies, which can reduce excess consumption and support emissions control systems like the catalytic converter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps restore proper fuel trim and injector timing\u003c\/li\u003e\n  \u003cli\u003eCan reduce unnecessary fuel consumption caused by incorrect readings\u003c\/li\u003e\n  \u003cli\u003eSupports catalytic converter longevity by maintaining balanced mixtures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Denso 234-9005 is aimed at vehicle owners, DIY mechanics, and repair shops seeking a dependable, OEM-quality replacement oxygen\/air–fuel ratio sensor for compatible Honda Civics, CR-Vs, and Acura RSXs. If your check engine light indicates an O2 or AFR sensor fault, or if you need to replace a sensor that’s slow or contaminated, this Denso unit provides a precision-fit option designed to meet original equipment standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Denso 234-9005 a direct fit for my Honda Civic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 234-9005 fits Honda Civic model years 2001–2005 as a direct-replacement oxygen\/air–fuel ratio sensor.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need special tools to install this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required beyond common hand tools and an oxygen sensor socket for easiest removal and installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":67585123221689,"sku":"B000C5UFVM","price":344.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/denso-234-9005-front-view.jpg?v=1790467980"},{"product_id":"dorman-diesel-injection-control-pressure-sensor-904-500-direct-fit-ipc-sensor-factory-connector","title":"Dorman Diesel Injection Control Pressure Sensor 904-500 — Direct-Fit IPC Sensor, Factory Connector","description":"\u003cp\u003e\u003cstrong\u003eThe Dorman 904-500 Diesel Injection Control Pressure (IPC) Sensor is a direct-fit replacement that restores accurate fuel pressure feedback to your engine control module for smoother idle and more predictable performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your diesel engine is idling unevenly, misfiring, or stalling, a worn or faulty injector control pressure sensor can cause the control module to make incorrect fuel delivery decisions. The Dorman 904-500 is engineered to match the original equipment form and function so the vehicle’s computer receives dependable pressure readings. It’s designed for straightforward installation with a factory-style electrical connector and is built and tested for lasting service life.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor affect engine idle and drivability?\u003c\/h3\u003e\n\u003cp\u003eThe IPC sensor monitors injection control pressure and sends that data to the engine control module, which adjusts fuel timing and quantity. When the sensor reports accurate pressures, the ECM can maintain steady idling and prevent rough running. A failing sensor can lead to inconsistent fueling and engine hesitation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores precise pressure data to the ECM for stable idling.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce misfires caused by incorrect fuel timing.\u003c\/li\u003e\n  \u003cli\u003ePrevents stalling by improving fuel control during load changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the Dorman 904-500 a reliable replacement part?\u003c\/h3\u003e\n\u003cp\u003eThis replacement IPC sensor is manufactured to match the fit, electrical interface, and signal characteristics of the original sensor. Dorman components are assembled from quality materials and undergo try-on and material testing to confirm fitment and durability. The result is a part that installs easily and performs consistently under normal operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement design for OEM-style fit and connector compatibility.\u003c\/li\u003e\n  \u003cli\u003eQuality materials and manufacturing to provide stable output over time.\u003c\/li\u003e\n  \u003cli\u003eTested for fit and function to reduce risk of premature failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally straightforward for anyone comfortable working under the hood. The sensor uses a factory-style electrical connector to simplify wiring, and it mounts in the same location as the original part. Basic hand tools are typically sufficient, but some vehicles may require minor clearance removal or a torque wrench for proper mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-style connector for plug-and-play electrical hookup.\u003c\/li\u003e\n  \u003cli\u003eStandard hand tools usually required; possible need to clear surrounding components.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle torque specs for secure mounting and leak-free operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dorman 904-500 IPC sensor is intended for owners and technicians servicing diesel vehicles experiencing rough idle, misfires, or stalling where diagnostics point to the injector control pressure circuit. It suits do-it-yourself mechanics who want a direct-fit replacement with reliable construction, and professional shops seeking a tested aftermarket alternative to the original sensor. Always verify compatibility by entering your vehicle’s make, model, and trim in the parts lookup or consulting repair documentation before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the Dorman 904-500 fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check fitment by entering your vehicle’s make, model, and trim in the parts lookup; this ensures exact compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How can I confirm the sensor is faulty before replacing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Diagnose with a scan tool and measure sensor voltage or signal; consult vehicle-specific troubleshooting steps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":67585135607993,"sku":"B00Z7O4FVY","price":196.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dorman-904-500-front-view.jpg?v=1790468633"},{"product_id":"bw-sr-x2v-o2-sensor-4oxv-oem-compatible-replacement-for-gasalert-microclip-xl-xt-restores-accurate-oxygen-readings","title":"BW SR-X2V O2 Sensor (4OXV) — OEM-compatible replacement for GasAlert MicroClip XL\/XT, restores accurate oxygen readings","description":"\u003cp\u003e\u003cstrong\u003eThe BW SR-X2V (4OXV) is a replacement oxygen (O2) sensor designed for BW\/CiTiceL-equipped portable gas detectors to reliably monitor ambient oxygen levels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis original-equipment compatible sensor fits a range of BW portable monitors and is intended for technicians, safety managers, and maintenance teams who need a quick, accurate swap-out for aged or depleted oxygen sensing elements. It’s manufactured to the specifications used in BW and CiTiceL sensors and is offered as a brand-new module. Note: the sensor cap or body color may vary by gas sensor type or production changes; the product image is illustrative.\u003c\/p\u003e\n\n\u003ch3\u003eWhich devices does the SR-X2V replace or fit?\u003c\/h3\u003e\n\u003cp\u003eThe SR-X2V oxygen sensor is engineered to work with specific BW and CiTiceL portable detectors, offering a straightforward replacement path for compatible models. Confirm compatibility against your instrument's manual or part number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon installs: GasAlert MicroClip XL and GasAlert MicroClip XT\u003c\/li\u003e\n  \u003cli\u003eAlso used in some GasAlertMax and GasAlertMax XT II configurations\u003c\/li\u003e\n  \u003cli\u003eCross-references: check your detector’s sensor part listing for SR-series oxygen sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this sensor affect detector performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or expired oxygen sensor with an SR-X2V restores the detector’s ability to sense oxygen within its designed range, keeping alarm thresholds responsive and readings stable. It does not change the instrument’s calibration requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores accurate O2 measurement and alarm activation\u003c\/li\u003e\n  \u003cli\u003eMaintains expected response time for oxygen events\u003c\/li\u003e\n  \u003cli\u003eRequires usual calibration and bump-testing after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a simple in-field swap, but always follow the detector manufacturer’s service instructions. After fitting the new sensor, run a bump test and, if necessary, perform calibration to confirm correct operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePower down device before sensor replacement\u003c\/li\u003e\n  \u003cli\u003eObserve polarity and connector alignment when seating sensor\u003c\/li\u003e\n  \u003cli\u003ePerform functional checks: bump test and calibration as recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any special ordering or product notes?\u003c\/h3\u003e\n\u003cp\u003eInternational versions of detectors and sensors can differ in labeling, fit, or documentation; check regional compatibility. The pictured graphic is for reference only—actual sensor cap or body colors may change with manufacturing updates or different gas types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSold new; verify part number SR-X2V \/ 4OXV before purchase\u003c\/li\u003e\n  \u003cli\u003eMay have different packaging or instructions for international sales\u003c\/li\u003e\n  \u003cli\u003eKeep supply records for maintenance logs and replacement schedules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: procurement and safety professionals, field technicians, and maintenance staff responsible for the ongoing operation of BW and CiTiceL portable gas detection fleets. If you manage detectors in industrial, confined-space, or general safety programs and need a factory-spec oxygen sensing element replacement, the SR-X2V provides a direct option to maintain operational readiness.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the SR-X2V compatible with my GasAlert MicroClip?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the SR-X2V commonly fits GasAlert MicroClip XL and XT models, but check your detector’s sensor part list to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to recalibrate after replacing the sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You should perform a bump test and recalibrate if recommended by the detector manual to ensure accurate readings and alarm function.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BW","offers":[{"title":"Default Title","offer_id":67585161527481,"sku":"B00MX5ZC3A","price":163.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bw-sr-x2v-front.jpg?v=1790469168"},{"product_id":"motorcraft-throttle-position-sensor-dy1164-oem-fit-replacement-durable-accurate-voltage-output","title":"Motorcraft Throttle Position Sensor DY1164 — OEM-fit replacement, durable \u0026 accurate voltage output","description":"\u003cp\u003e\u003cstrong\u003eThe Motorcraft DY1164 Throttle Position Sensor is an OEM-grade sensor that provides accurate throttle position feedback to engine control systems for smooth acceleration and reliable drivability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe DY1164 is designed and produced by Motorcraft, a trusted name in automotive replacement components. This sensor replaces factory throttle position sensors to restore correct throttle angle readings sent to the engine control unit (ECU). Built to meet original equipment specifications, the DY1164 focuses on durability, consistent electrical output, and straightforward installation so you can maintain optimal engine response and emissions control.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor affect engine response?\u003c\/h3\u003e\n\u003cp\u003eThe throttle position sensor translates pedal movement into an electrical signal the ECU uses to manage fuel delivery and ignition timing. A precise signal helps the ECU make real-time adjustments for smooth acceleration and steady idle. Replacing a failing sensor with a properly calibrated Motorcraft unit reduces hesitation and erratic throttle behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides linear voltage output across throttle range for accurate ECU readings\u003c\/li\u003e\n  \u003cli\u003eReduces throttle lag and inconsistent idle caused by worn sensors\u003c\/li\u003e\n  \u003cli\u003eHelps maintain correct air-fuel ratio under changing loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key features and build qualities of the DY1164?\u003c\/h3\u003e\n\u003cp\u003eThe DY1164 is manufactured to meet Motorcraft’s quality benchmarks and fit original mounting and connector specs. It uses corrosion-resistant materials and precise internal components to maintain signal stability over time. The electrical connector and mounting holes match factory locations for plug-and-play replacement on compatible vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-fit housing and connector for simple installation without modification\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists vibration and environmental exposure\u003c\/li\u003e\n  \u003cli\u003eConsistent electrical performance for reliable throttle mapping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and test the Motorcraft DY1164?\u003c\/h3\u003e\n\u003cp\u003eInstallation generally requires basic hand tools and attention to connector orientation. After mounting and connecting, use a multimeter or a diagnostic scanner to confirm the sensor’s voltage signal changes smoothly as the throttle is moved. If the vehicle uses a relearn procedure, follow manufacturer steps or clear relevant codes with a scanner to ensure proper ECU calibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect battery, remove old sensor, install DY1164 in original location\u003c\/li\u003e\n  \u003cli\u003eVerify connector seating and secure mounting; no modification needed\u003c\/li\u003e\n  \u003cli\u003eTest voltage sweep or run ECU relearn\/scan for stored throttle-related codes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this replace my original sensor exactly?\u003c\/h3\u003e\n\u003cp\u003eThe Motorcraft DY1164 is engineered as a direct-fit replacement for compatible factory sensors, matching dimensions and electrical connections. Always verify part cross-reference and vehicle compatibility before purchase. Using the correct Motorcraft part ensures fitment accuracy and helps avoid wiring or calibration issues that can arise with non-matching aftermarket units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for seamless swap with original equipment\u003c\/li\u003e\n  \u003cli\u003eCheck VIN or parts catalog to confirm DY1164 compatibility\u003c\/li\u003e\n  \u003cli\u003eMeant to meet or exceed factory specifications for reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Motorcraft DY1164 Throttle Position Sensor is intended for professional mechanics and do-it-yourself vehicle owners who need an OEM-level replacement for throttle position sensing. If your vehicle shows throttle hesitation, irregular idle, or throttle-related diagnostic codes, this Motorcraft unit provides a reliable option to restore correct throttle feedback. Ideal for anyone seeking a durable, plug-and-play sensor from a recognized manufacturer.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLeading Manufacturer Of High-Quality Products\u003c\/li\u003e\n  \u003cli\u003eInternational Renown For Our Diverse Range Of Award-Winning Products\u003c\/li\u003e\n  \u003cli\u003eFully Equipped With State-Of-The-Art Technology\u003c\/li\u003e\n  \u003cli\u003eAll Products Have Been Designed With The Professional In Mind\u003c\/li\u003e\n  \u003cli\u003eConstantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know the DY1164 fits my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Verify fit by checking your vehicle's OEM part number or using Motorcraft\/retailer compatibility tools with your VIN.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the sensor myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—basic hand tools suffice. Disconnect battery, swap the sensor, then test voltage sweep or run a scanner for relearn.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Motorcraft","offers":[{"title":"Default Title","offer_id":67585182597305,"sku":"B003ULHUPO","price":173.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/motorcraft-dy1164-front-view.jpg?v=1790469350"},{"product_id":"kvzkvz-16916-oxygen-sensor-replacement-for-robinair-ac1234-4-ip67-high-sensitivity-o2-accuracy","title":"KVZKVZ 16916 Oxygen Sensor Replacement for Robinair AC1234-4 — IP67, High-Sensitivity O2 Accuracy","description":"\u003cp\u003e\u003cstrong\u003eKVZKVZ 16916 oxygen sensor replacement restores accurate O2 readings for Robinair R-1234YF refrigerant identifiers, reducing false errors and extending instrument uptime.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Robinair AC1234 series refrigerant identifier is showing error messages like \"Replace ID O2 Sensor Soon\" or \"Analyzer Error 6,\" the KVZKVZ 16916 oxygen sensor is a direct-fit replacement designed for those models. This sensor uses a highly sensitive electrode array and an IP67-rated interface to resist corrosion and moisture found in typical vehicle and HVAC workshop environments. That combination helps maintain identification accuracy and reduces downtime due to sensor failure.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this sensor affect refrigerant identification accuracy?\u003c\/h3\u003e\n\n\u003cp\u003eThe KVZKVZ 16916 sensor improves the stability of oxygen measurements by controlling concentration error within 0.2%, which helps the refrigerant identifier differentiate R-1234yf from contaminants and mixed blends. More consistent O2 data reduces false positives and missed identifies during routine checks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-sensitivity electrodes for finer oxygen detection\u003c\/li\u003e\n  \u003cli\u003eSpecified concentration error control: within 0.2%\u003c\/li\u003e\n  \u003cli\u003eReduces misidentification of refrigerant blends and contaminants\u003c\/li\u003e\n  \u003cli\u003eIncreases effective identifier uptime by reducing sensor-related downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Robinair models is the 16916 sensor compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThis replacement is made to fit multiple Robinair AC1234 and R-1234YF platform variants used for refrigerant identification and recovery. It is compatible with AC1234-4, AC1234-4SL, AC1234-4-230, AC1234-6, AC1234-9 and works with the Robinair R-1234YF machine as well as 16990\/16995 refrigerant identifiers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit for AC1234-4, AC1234-4SL, AC1234-4-230, AC1234-6, AC1234-9\u003c\/li\u003e\n  \u003cli\u003eSuitable for R-1234YF refrigerant identifier series\u003c\/li\u003e\n  \u003cli\u003eCompatible with 16990 and 16995 Robinair refrigerant identifiers\u003c\/li\u003e\n  \u003cli\u003eNo major modifications required for standard installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and protection features extend the sensor's service life?\u003c\/h3\u003e\n\n\u003cp\u003eThe KVZKVZ 16916 sensor uses an upgraded interface rated IP67 to guard against dust and short-term immersion, and materials chosen to resist corrosion from refrigerants and workshop chemicals. Those design choices let the sensor operate reliably in both dry and humid settings, lowering replacement frequency.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP67-rated interface for dust and moisture resistance\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials at the connector and housing\u003c\/li\u003e\n  \u003cli\u003eRobust electrode design to withstand routine workshop conditions\u003c\/li\u003e\n  \u003cli\u003eLonger service life under normal operating cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace the sensor and how will I know?\u003c\/h3\u003e\n\n\u003cp\u003eReplace the 16916 oxygen sensor when your Robinair display shows warnings like \"Replace ID O2 Sensor Soon\" or \"Analyzer Error 6,\" when the unit can’t identify refrigerant, or when recovery\/identification cycles reach the instrument’s upper limits. Replacing the sensor promptly prevents misidentification and helps maintain diagnostic accuracy.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplace on \"Replace ID O2 Sensor Soon\" or \"Analyzer Error 6\" alerts\u003c\/li\u003e\n  \u003cli\u003eChange if refrigerant identification or recovery fails repeatedly\u003c\/li\u003e\n  \u003cli\u003eSwap at recommended service intervals or after extended use\u003c\/li\u003e\n  \u003cli\u003eFollow your instrument manual for proper replacement steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The KVZKVZ 16916 oxygen sensor replacement is designed for automotive technicians, HVAC professionals, and shop owners who use Robinair AC1234 and R-1234YF refrigerant identifiers and need a reliable, corrosion-resistant O2 sensor that restores accurate readings. It is also suitable for service shops that want to reduce instrument downtime and limit false error messages during refrigerant analysis. KVZKVZ provides one year of after-sales support and a customer response window to help with installation questions or troubleshooting.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the KVZKVZ 16916 sensor a direct replacement for Robinair R-1234YF?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits AC1234-4, AC1234-4SL, AC1234-4-230, AC1234-6, AC1234-9 and works with R-1234YF and 16990\/16995 identifiers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What protection does the sensor have against moisture and corrosion?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The sensor uses an IP67-rated interface and corrosion-resistant materials to perform reliably in humid and corrosive workshop environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KVZKVZ","offers":[{"title":"Default Title","offer_id":67585192493241,"sku":"B0F43Y6XYR","price":242.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kvzkvz-16916-front-view.jpg?v=1790469564"},{"product_id":"delphi-mass-air-flow-sensor-af10060-direct-fit-maf-with-dual-heated-elements-for-fast-response","title":"Delphi Mass Air Flow Sensor AF10060 - Direct-Fit MAF with Dual Heated Elements for Fast Response","description":"\u003cstrong\u003eThe Delphi AF10060 Mass Air Flow Sensor precisely measures incoming air to help restore correct engine fueling, drivability, and emissions behavior.\u003c\/strong\u003e\n\nThe AF10060 from Delphi is a direct-fit mass air flow (MAF) sensor designed to relay continuous airflow volume and velocity data to the engine control module (ECM). Built with dual heated elements and multiple sensing components, this sensor tolerates wide ambient temperature swings and electrical noise while giving fast response to changes in intake flow. It’s engineered to match original equipment fit and function so technicians and DIYers can replace a failing unit and recover accurate air metering without complicated modifications.\n\n\u003ch3\u003eHow quickly does the AF10060 respond to airflow changes?\u003c\/h3\u003e\n\u003cp\u003eDelphi designed the AF10060 for fast electrical response so the ECM receives near-instant updates when intake flow shifts. Typical response is very fast—on the order of milliseconds—so fueling adjustments and transient throttle behavior remain accurate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast response time to 90% of flow change for prompt fueling adjustments\u003c\/li\u003e\n  \u003cli\u003eDual heated elements that maintain sensing stability across conditions\u003c\/li\u003e\n  \u003cli\u003eMultiple sensing elements reduce sensitivity to supply voltage fluctuations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this MAF sensor work in harsh temperatures and noisy electrical systems?\u003c\/h3\u003e\n\u003cp\u003eThe AF10060 is built to perform in demanding environments, including low-temperature applications and vehicles with variable electrical noise. Cold sealing and robust element design help preserve measurement accuracy from extreme cold up to high ambient temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-seal capable construction for reliable operation at very low temperatures\u003c\/li\u003e\n  \u003cli\u003eMultiple sensing elements minimize the effect of electrical interference\u003c\/li\u003e\n  \u003cli\u003eDurable materials and engineering tuned for long-term stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this Delphi sensor simplify repair and installation?\u003c\/h3\u003e\n\u003cp\u003eDelphi engineers the AF10060 as an OE-style replacement to reduce installation time and complexity. The shape, connector, and calibration match vehicle-specific requirements whenever possible so you can avoid extra parts or expensive reprogramming in many applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplication-specific design to match OE fit and connector locations\u003c\/li\u003e\n  \u003cli\u003ePre-calibrated sensing elements to limit the need for additional tuning\u003c\/li\u003e\n  \u003cli\u003eEngineered to reduce unnecessary component replacement during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect after replacing a failing MAF?\u003c\/h3\u003e\n\u003cp\u003eReplacing a degraded or faulty MAF with the Delphi AF10060 restores consistent airflow data to the ECM, improving fuel metering, idle quality, and throttle response. Accurate airflow measurement also helps keep emissions systems operating within expected parameters by preventing excessive fueling or lean conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved fuel injection accuracy and throttle response\u003c\/li\u003e\n  \u003cli\u003eSmoother idle and transient engine behavior after replacement\u003c\/li\u003e\n  \u003cli\u003eSupport for emissions control by restoring correct air-fuel balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nThe Delphi AF10060 is aimed at technicians, independent repair shops, and informed vehicle owners seeking an OE-quality MAF sensor replacement. Choose this sensor when you need fast response, temperature resilience, and an application-specific unit that minimizes installation hassle while restoring reliable airflow measurement. Note: warranty terms may vary depending on the seller; review purchase details for coverage information.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the AF10060 a direct OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The AF10060 is engineered to match OE fit, connector, and performance for many applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this MAF work in very cold climates?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The sensor features cold sealing and heated elements designed for low-temperature operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67585425670329,"sku":"B004SH4MJG","price":179.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-af10060-front-view.jpg?v=1790469931"},{"product_id":"bosch-wideband-oxygen-sensor-17025-direct-fit-a-f-sensor-high-temp-durable","title":"Bosch Wideband Oxygen Sensor 17025 — Direct-Fit A\/F Sensor, High-Temp Durable","description":"\u003cp\u003e\u003cstrong\u003eThe BOSCH 17025 is a direct-fit premium wideband oxygen (A\/F) sensor engineered to deliver precise air\/fuel readings for aftermarket high-performance and tuning applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned and manufactured by Bosch, the 17025 wideband O2 sensor offers a more detailed air\/fuel measurement than a basic rich\/lean oxygen sensor. It integrates an advanced sensing element, OE-style connectors, and a rugged housing to withstand high-temperature exhaust environments. This product suits tuners, performance shops, and enthusiasts who need accurate real-time A\/F data for engine calibration and monitoring.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BOSCH 17025 improve air\/fuel tuning accuracy?\u003c\/h3\u003e\n\u003cp\u003eThe 17025 uses a wideband sensing element that reports an exact air\/fuel ratio rather than a binary rich-or-lean signal. This finer resolution helps tuning tools and engine management systems make precise fueling adjustments, improving tuning repeatability and data logging fidelity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWideband sensing element provides continuous A\/F values, not just rich\/lean.\u003c\/li\u003e\n  \u003cli\u003eCompatible with aftermarket wideband controllers and tuners for real-time feedback.\u003c\/li\u003e\n  \u003cli\u003eReduces guesswork when dialing fuel maps or diagnosing fueling issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the sensor durable for performance exhaust conditions?\u003c\/h3\u003e\n\u003cp\u003eBosch engineered the 17025 with a reinforced housing and a seared protection tube that’s checked during a 100% functional quality test. Those design choices reduce wear from combustion byproducts and thermal cycling, extending service life under high-heat, high-stress conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust sensor design resists contamination and thermal stress.\u003c\/li\u003e\n  \u003cli\u003eSeared protection tube improves mechanical protection and longevity.\u003c\/li\u003e\n  \u003cli\u003eFactory-tested to ensure each unit meets performance standards before shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the BOSCH 17025 easy to install in my vehicle or kit?\u003c\/h3\u003e\n\u003cp\u003eThe 17025 arrives as a true direct-fit component with OE-style connectors and a pre-coated thread that includes anti-seize compound. That reduces installation fuss and prevents thread galling, making it straightforward to mount in existing wideband kits or direct-fit locations where applicable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue OE connectors match factory harnesses and aftermarket controllers.\u003c\/li\u003e\n  \u003cli\u003eThreads pre-coated with anti-seize for clean, repeatable installs.\u003c\/li\u003e\n  \u003cli\u003eWorks with common wideband kits and many performance setups requiring precise A\/F data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich signals and systems is this sensor intended for?\u003c\/h3\u003e\n\u003cp\u003eThis wideband sensor supplies the high-resolution air\/fuel data needed by aftermarket controllers, standalone ECUs, and datalogging devices. It’s built for performance applications where exact A\/F measurement is necessary rather than coarse open\/closed-loop indication.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFeeds aftermarket wideband controllers and tuners with precise A\/F outputs.\u003c\/li\u003e\n  \u003cli\u003eIdeal for standalone ECUs and performance datalogging systems.\u003c\/li\u003e\n  \u003cli\u003eNot a simple lean\/rich switch—engineers use it for calibration and diagnostics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BOSCH 17025 wideband oxygen sensor is aimed at mechanics, tuning shops, motorsport teams, and car enthusiasts who require accurate, reliable air\/fuel data during calibration, dyno sessions, or on-track monitoring. If you’re installing or upgrading a wideband system and need OEM-style fitment, robust construction, and precise A\/F feedback, this sensor is built to meet those needs without unnecessary complexity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the BOSCH 17025 work with my aftermarket wideband controller?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 17025 is designed for aftermarket wideband systems and provides the precise A\/F signal those controllers require.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the sensor come ready to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it has OE-style connectors and threads pre-coated with anti-seize for straightforward, reliable installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":67585444020409,"sku":"B009J3EXGQ","price":192.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bosch-17025-front-view.jpg?v=1790470302"},{"product_id":"zxyculture-oxygen-sensor-for-infiniti-jx35-nissan-pathfinder-2013-2014-direct-fit-3-5l-v6-oe-matching","title":"Zxyculture Oxygen Sensor for Infiniti JX35 \u0026 Nissan Pathfinder 2013-2014 — Direct-Fit 3.5L V6, OE-Matching","description":"\u003cp\u003e\u003cstrong\u003eZxyculture oxygen sensor for Infiniti JX35 and Nissan Pathfinder (2013–2014) is a direct-fit replacement sensor engineered to restore accurate exhaust monitoring and help your engine management system optimize combustion.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aftermarket replacement oxygen sensor is built for 3.5L V6 models from Infiniti and Nissan listed below. It matches common OE part numbers and is intended to plug into the original wiring and mounting locations, simplifying installation while providing consistent signal feedback to the vehicle’s ECU. The unit is constructed with corrosion-resistant materials and reinforced components to withstand heat and vibration in the engine bay.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oxygen sensor improve my vehicle’s engine monitoring?\u003c\/h3\u003e\n\u003cp\u003eThe sensor measures oxygen in exhaust gases and sends voltage signals to the engine control unit so air–fuel mixture adjustments can be made. A properly functioning sensor helps the ECU maintain more consistent combustion conditions and can reduce irregular running due to inaccurate readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides steady voltage feedback to the ECU for accurate air–fuel adjustments\u003c\/li\u003e\n  \u003cli\u003eEngineered to match OE signal characteristics for compatibility\u003c\/li\u003e\n  \u003cli\u003eHelps reduce long-term drivability issues caused by faulty oxygen readings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich models and part numbers is this sensor compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis sensor is specified for Infiniti and Nissan 3.5L V6 applications from the 2013–2014 model years. It is offered to match many original equipment numbers; always cross-check the part number on your old sensor before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Infiniti JX35 (2013) and QX60 (2014) 3.5L V6\u003c\/li\u003e\n  \u003cli\u003eCompatible with Nissan Pathfinder (2013–2014), Altima Sedan (2013–2014), Quest (2014) 3.5L V6\u003c\/li\u003e\n  \u003cli\u003eMatches OE references such as 234-9135, 234-4595, 234-4599, 19316342 and related numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe part is designed for high plug-and-play compatibility with the listed vehicles, which typically keeps installation time and effort low. Most DIYers with basic tools can replace the sensor by unplugging the old unit and swapping in the new one; however, use proper torque for the sensor bung and follow safety precautions for hot exhaust components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design to fit original mounting location and connector\u003c\/li\u003e\n  \u003cli\u003eReinforced thread and sealing to resist exhaust leaks when installed properly\u003c\/li\u003e\n  \u003cli\u003eRecommended: anti-seize on threads, correct torque, and verify connector seating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and durability features does this sensor offer?\u003c\/h3\u003e\n\u003cp\u003eThe sensor is manufactured using corrosion-resistant materials and a reinforced assembly intended to handle typical engine bay heat and vibration. These build choices aim to extend service life compared with generic, unprotected units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant housing to withstand exhaust environment\u003c\/li\u003e\n  \u003cli\u003eReinforced internals for vibration resistance and stable signal output\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain accurate readings under repeated thermal cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Zxyculture oxygen sensor is aimed at owners and mechanics of Infiniti JX35, QX60 and Nissan Pathfinder, Altima, or Quest 3.5L V6 vehicles from the 2013–2014 model years who need a reliable, direct-fit replacement. It suits DIY installers and professional shops that require a part matching common OE numbers and built for durability in high-heat exhaust conditions. Always confirm your vehicle’s original part number and connector type before ordering to ensure proper fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this oxygen sensor fit my 2013 Nissan Pathfinder 3.5L V6?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s listed for the 2013–2014 Pathfinder 3.5L V6 but confirm your old part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required beyond standard hand tools; use an oxygen-sensor socket and correct torque.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Zxyculture","offers":[{"title":"Default Title","offer_id":67585450180793,"sku":"B0FNR99YB6","price":167.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/zxyculture-front-view-sensor.jpg?v=1790470660"},{"product_id":"bosch-mass-air-flow-maf-sensor-0280218190-oe-calibrated-water-resistant-for-mercedes-benz","title":"Bosch Mass Air Flow (MAF) Sensor 0280218190 — OE-Calibrated, Water-Resistant for Mercedes-Benz","description":"\u003cp\u003e\u003cstrong\u003eBOSCH 0280218190 is a 100% new original equipment mass air flow (MAF) sensor engineered to deliver precise airflow readings for correct fuel metering and reliable engine performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBosch has supplied OE-grade airflow sensing to vehicle manufacturers worldwide; this MAF sensor follows that legacy by pairing a calibrated sensing element with a matched housing (when applicable) to reproduce factory specifications. The result is a component designed to reduce sensor drift, resist water and particulate damage, and maintain emission compliance while helping the engine management system achieve efficient combustion.\u003c\/p\u003e\n\n\u003ch3\u003eHow will the BOSCH 0280218190 affect my vehicle's fuel efficiency and emissions?\u003c\/h3\u003e\n\u003cp\u003eBy restoring accurate airflow measurement to the engine control unit, this Bosch MAF sensor helps the ECU compute proper fuel injection and ignition timing. While results vary by vehicle and driving conditions, accurate MAF operation supports improved fuel economy and lower exhaust emissions compared with a failing or drifted sensor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-calibrated sensor and housing (where included) ensure precise airflow readings\u003c\/li\u003e\n  \u003cli\u003ePatented design reduces sensor drift for longer-term consistency\u003c\/li\u003e\n  \u003cli\u003eLower pressure drop helps maintain engine breathing efficiency\u003c\/li\u003e\n  \u003cli\u003eSupports emission control systems by providing correct input to the ECU\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features make this Bosch MAF sensor more durable than aftermarket alternatives?\u003c\/h3\u003e\n\u003cp\u003eBosch designs this MAF with robustness in mind: the sensing element and housing are engineered to resist water and particulate intrusion and to minimize drift over time. Every unit is 100% new—never remanufactured—and follows Bosch's OE standards for materials and tolerances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePatented protection against moisture and contaminants\u003c\/li\u003e\n  \u003cli\u003eNew (not remanufactured) construction for maximum life\u003c\/li\u003e\n  \u003cli\u003eOE-identical connectors and mounting points for secure fitment\u003c\/li\u003e\n  \u003cli\u003ePrecision calibration matched to Bosch and vehicle specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward and will it fit my Mercedes-Benz model?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be quick because Bosch maintains OE-compatible attachment points and connector layouts. Fitment is specific to vehicle models and years, so always verify compatibility using the vehicle fitment checker or your VIN before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OE-style connector for plug-and-play installation\u003c\/li\u003e\n  \u003cli\u003eSold with calibrated sensor and housing where applicable to simplify replacement\u003c\/li\u003e\n  \u003cli\u003eCompatible with many Mercedes-Benz models from mid-2000s to early 2010s—check fitment details\u003c\/li\u003e\n  \u003cli\u003eSimple swap in most applications; typical replacement takes minutes for experienced technicians\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Bosch ensure measurement accuracy and engine management compatibility?\u003c\/h3\u003e\n\u003cp\u003eBosch calibrates the sensing element and housing (when included) together to match the airflow characteristics expected by the vehicle's ECU. This factory-level calibration helps restore the original signal profile for proper fuel trims and engine control strategies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCalibration performed to match OE response curves\u003c\/li\u003e\n  \u003cli\u003eSensor and housing sold together for selected part numbers to preserve accuracy\u003c\/li\u003e\n  \u003cli\u003eReduces the risk of check-engine lights caused by incorrect airflow data\u003c\/li\u003e\n  \u003cli\u003eManufactured to Bosch quality and testing standards used in original equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, independent repair shops, and Mercedes-Benz owners who need a direct-replacement airflow sensor built to original equipment standards. This Bosch MAF sensor is appropriate for drivers seeking a reliable, new (not remanufactured) component that restores correct airflow measurement, supports emissions compliance, and simplifies installation through OE-matching fit and calibration. Always confirm compatibility with your specific vehicle year and engine before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the BOSCH 0280218190 new or remanufactured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This MAF sensor is 100% new, not remanufactured, ensuring full factory quality and longevity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor fit my Mercedes-Benz model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many Mercedes-Benz models (mid-2000s to early 2010s); verify fitment with your VIN or the site's fit checker.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":67585481572537,"sku":"B004AGHZF8","price":163.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bosch-maf-sensor-front-view.jpg?v=1790471263"},{"product_id":"bosch-oxygen-sensor-direct-fit-single-oe-replacement-fast-heating-stainless-steel","title":"Bosch Oxygen Sensor Direct-Fit Single — OE Replacement, Fast-Heating Stainless-Steel","description":"\u003cb\u003eThe BOSCH 17014 Premium Original Equipment Oxygen Sensor is a direct-fit replacement oxygen sensor engineered to restore accurate air-fuel feedback and reliable emissions performance.\u003c\/b\u003e\n\n\u003cp\u003eBuilt from Bosch's decades of sensor development, this single oxygen sensor uses a double laser-welded stainless steel housing, a fast-acting heater element, and factory-tested components so it reaches operating temperature quickly and resists exhaust wear. It ships ready to install with OE-style connectors and anti-seize-coated threads to simplify replacement and reduce the chance of installation damage.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor affect my vehicle's performance?\u003c\/h3\u003e\n\u003cp\u003eAn oxygen sensor provides critical feedback to the engine control unit so the engine maintains the correct air-fuel ratio. Replacing a worn or failing sensor helps stabilize idle, improves throttle response, and supports proper fuel economy without altering engine calibrations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores accurate oxygen readings for better combustion control\u003c\/li\u003e\n  \u003cli\u003eHelps reduce rough idle and hesitation caused by incorrect fuel trims\u003c\/li\u003e\n  \u003cli\u003eSupports fuel-efficiency by enabling correct injector timing and duration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat design features make the BOSCH 17014 durable?\u003c\/h3\u003e\n\u003cp\u003eThis Bosch sensor is engineered for longevity through a sealed stainless steel body and robust welds that protect internal components from corrosive exhaust gases. The protective tube shows signs of factory testing, indicating each unit was fully evaluated before leaving the factory.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble laser-welded stainless-steel housing for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eFully submersible and sealed design to guard against exhaust contamination\u003c\/li\u003e\n  \u003cli\u003eFactory testing visible in protection tube appearance confirms functionality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the fast-acting heater improve operation?\u003c\/h3\u003e\n\u003cp\u003eThe integrated heater brings the sensing element up to its working temperature in seconds, which shortens warm-up time and provides accurate oxygen readings sooner after startup. This is especially useful for modern engines and during cold-weather operation when prompt sensor response is important.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick warm-up reduces time the ECU runs on open-loop fueling\u003c\/li\u003e\n  \u003cli\u003eCompatible with planar and 3-, 4-, and 5-wire thimble-type sensor circuits\u003c\/li\u003e\n  \u003cli\u003eImproves emissions control during short trips and cold starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eBosch supplies true direct-fit connectors and harnesses with threads pre-coated in anti-seize, making installation easier and lowering the risk of thread damage during service. Still, confirm vehicle compatibility and sensor position with your fitment guide before purchase for a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-style plug and harness for plug-and-play replacement\u003c\/li\u003e\n  \u003cli\u003eThreads pre-coated with anti-seize to protect against galling\u003c\/li\u003e\n  \u003cli\u003eVerify vehicle year, make, engine, and sensor position before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BOSCH 17014 is aimed at owners and technicians who want a high-quality, direct-fit oxygen sensor that matches original-equipment standards. It suits drivers seeking durable, factory-tested replacement parts for affected vehicles — including select Rolls-Royce Phantom models listed by fitment — and anyone wanting to maintain emissions control, drivability, and fuel efficiency without aftermarket calibration changes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the BOSCH 17014 fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check vehicle year, make, engine, and sensor position against the fitment guide; fitment can vary by engine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need anti-seize before installing this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—threads come pre-coated with anti-seize, so additional compound is typically unnecessary.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":67585511981241,"sku":"B000BZI4ZW","price":176.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bosch-17014-front-view.jpg?v=1790471983"},{"product_id":"thundermingo-mass-air-flow-maf-sensor-for-toyota-2-4l-22rec-22250-35050-direct-fit-7-pin-8-hole","title":"THUNDERMINGO Mass Air Flow (MAF) Sensor for Toyota 2.4L 22REC – 22250-35050 Direct-Fit, 7-Pin\/8-Hole","description":"\u003cstrong\u003eReplacement THUNDERMINGO mass air flow (MAF) sensor 22250-35050 for 2.4L 22REC Toyota Pickup and 4Runner (1989–1995).\u003c\/strong\u003e\n\n\u003cp\u003eThis THUNDERMINGO MAF meter is a direct-fit replacement designed to restore accurate air-flow readings for Toyota 2.4L 22REC four-cylinder engines used in Pickup (1989–1995) and 4Runner (1990–1995) models. The unit is brand new, built to match the original mounting pattern and electrical connections so it slips into the factory location and communicates with your engine control system without modification.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this MAF sensor match the original equipment?\u003c\/h3\u003e\n\u003cp\u003eThe sensor reproduces the factory mounting pattern and terminal layout so it lines up with the stock harness and intake assembly. It uses the same seven-pin blade-style electrical connector and eight mounting holes for a secure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace part numbers: 22250-35050, 2225035050.\u003c\/li\u003e\n  \u003cli\u003eMounting holes: 8 for original alignment.\u003c\/li\u003e\n  \u003cli\u003eTerminal count: 7 blade-style pins for exact electrical compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this MAF sensor work on my specific Toyota model?\u003c\/h3\u003e\n\u003cp\u003eThis unit is compatible with Toyota Pickup models equipped with the 2.4L 22REC four-cylinder engine from 1989 through 1995, and Toyota 4Runner with the same engine from 1990 through 1995. Verify your engine code and connector shape prior to purchase to ensure fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: 100% new from THUNDERMINGO for 22REC engine vehicles.\u003c\/li\u003e\n  \u003cli\u003eModel years: Pickup 1989–1995; 4Runner 1990–1995.\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle’s OEM part number against 22250-35050.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and service?\u003c\/h3\u003e\n\u003cp\u003eThe sensor ships as shown in product images and does not include installation instructions. Installation is straightforward for anyone familiar with basic under-hood work, but follow torque specs and electrical safety precautions when replacing the unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo printed instructions included—refer to online guides or vehicle repair manual.\u003c\/li\u003e\n  \u003cli\u003eDisconnect the battery before unplugging the electrical connector.\u003c\/li\u003e\n  \u003cli\u003eInspect the intake boot and harness for damage while installing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical specifics I should expect?\u003c\/h3\u003e\n\u003cp\u003eBuilt to match the OE form and function, the THUNDERMINGO MAF features a seven-pin blade terminal configuration and eight mounting points for a stable, repeatable installation. This helps the engine computer receive consistent airflow data under varying conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTerminal type: blade-style, 7 pins.\u003c\/li\u003e\n  \u003cli\u003eMounting hole quantity: 8 for factory alignment.\u003c\/li\u003e\n  \u003cli\u003eSold as a single replacement unit without gasket or hardware unless pictured.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This THUNDERMINGO 22250-35050 MAF meter is intended for owners or mechanics replacing a failing or damaged mass air flow sensor on Toyota Pickup and 4Runner models with the 2.4L 22REC engine from the model years listed. It’s suitable for DIY installers comfortable with basic automotive electrical and intake work, and for professional shops seeking a direct-fit aftermarket replacement that matches OEM connector and mounting specifications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote:\u003c\/em\u003e Before ordering, compare the part number and connector type with your vehicle’s existing sensor. If uncertain, contact THUNDERMINGO customer service with your VIN and engine code for confirmation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this MAF sensor fit my 1992 Toyota Pickup 2.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits Toyota Pickup 1989–1995 with the 2.4L 22REC engine. Confirm your existing part number matches 22250-35050.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are installation instructions included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The item ships without instructions; consult online tutorials or a repair manual for correct installation steps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"THUNDERMINGO","offers":[{"title":"Default Title","offer_id":67585573159097,"sku":"B0FHKPVZQD","price":197.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/thundermingo-front-view-maf-sensor.jpg?v=1790472141"},{"product_id":"denso-oxygen-o2-sensor-234-4168-for-lexus-scion-toyota-4-wire-13-8in-lead-oe-fit","title":"Denso Oxygen O2 Sensor 234-4168 for Lexus\/Scion\/Toyota — 4‑Wire 13.8in Lead, OE Fit","description":"\u003cp\u003e\u003cstrong\u003eDenso 234-4168 is a direct-replacement narrow-band oxygen (O2) sensor engineered to restore precise air-fuel feedback on specified Lexus, Scion and Toyota models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Denso sensor is built to match original equipment specifications so the engine control unit receives accurate exhaust oxygen readings. The part includes a four-wire harness with a 13.78-inch length to plug into factory connectors without splicing. Denso designs and tests its oxygen sensors with layers and materials intended to resist common contaminants, helping maintain stable sensor response and service life under normal driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles is this Denso O2 sensor compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis sensor fits a defined list of Lexus, Scion and Toyota vehicles. Verify your vehicle’s model year and factory part location against fitment before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLexus RX330: 2004–2006\u003c\/li\u003e\n  \u003cli\u003eScion iQ: 2012–2015\u003c\/li\u003e\n  \u003cli\u003eScion xB: 2008–2015\u003c\/li\u003e\n  \u003cli\u003eToyota Highlander: 2004–2007\u003c\/li\u003e\n  \u003cli\u003eToyota Sienna: 2004–2006\u003c\/li\u003e\n  \u003cli\u003eToyota Venza: 2009–2014\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this sensor help engine performance and economy?\u003c\/h3\u003e\n\u003cp\u003eBy supplying the engine control unit with accurate oxygen-level data, the sensor enables the ECU to adjust fuel delivery and ignition timing more precisely. Correct sensing helps the engine run closer to optimal air-fuel ratio, which can support efficient combustion and smoother operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnables ECU fuel trim adjustments for balanced combustion\u003c\/li\u003e\n  \u003cli\u003eSupports smoother idle and transient throttle response\u003c\/li\u003e\n  \u003cli\u003eHelps maintain emissions control system effectiveness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat design features improve durability and fit?\u003c\/h3\u003e\n\u003cp\u003eDenso builds this replacement oxygen sensor to OE tolerances for plug-and-play installation and long-term resistance to common exhaust contaminants. The sensor incorporates protective layers and quality materials to reduce risk of premature degradation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-manufactured for first-time fitment into factory mounting\u003c\/li\u003e\n  \u003cli\u003eProtective aluminum-oxide trap layer limits silicone and lead contamination\u003c\/li\u003e\n  \u003cli\u003eFour-wire harness with approximately 13.78\" lead for correct connector reach\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I check during replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally straightforward for anyone familiar with under-vehicle service or routine exhaust work; basic hand tools and a proper sensor socket are typically all that’s required. Always allow the exhaust to cool, disconnect the battery if recommended, and confirm the vehicle’s exact sensor position before removing the old unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse an O2 sensor socket to avoid damaging the hex and wiring\u003c\/li\u003e\n  \u003cli\u003eCompare connector type and wire count to factory harness before purchasing\u003c\/li\u003e\n  \u003cli\u003eInspect threads and anti-seize (if present) and torque to factory spec\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this replacement oxygen sensor for? This Denso 234-4168 is aimed at owners and technicians who need a like-for-like, narrow-band O2 sensor for the listed Lexus, Scion and Toyota models. If you prioritize an OE-style replacement that matches factory fit and electrical interface, this sensor provides a straightforward option. It is suitable for routine maintenance, emissions troubleshooting, and restoring correct sensor input after a failed or aging unit. Always confirm correct vehicle year and sensor location before ordering to ensure compatibility and fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this Denso sensor a direct replacement for my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This sensor is a direct OE-style replacement for the listed Lexus, Scion and Toyota model years; match your vehicle year and sensor location to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the sensor include the wiring harness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Denso 234-4168 includes a four-wire harness with a 13.78-inch lead and factory-style connector.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":67585576632505,"sku":"B000IYBF6Q","price":163.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/denso-234-4168-front-view.jpg?v=1790472353"},{"product_id":"denso-upstream-air-fuel-ratio-oxygen-sensor-234-9001-10-63-4-wire-heated-harness-direct-fit","title":"Denso Upstream Air–Fuel Ratio Oxygen Sensor 234-9001 — 10.63\" 4‑Wire Heated Harness, Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eDenso 234-9001 is a direct-fit upstream air–fuel ratio (AFR) oxygen sensor with a 10.63\" 4-wire heated harness designed to replace the factory sensor without wiring modifications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Denso air–fuel ratio sensor provides precise exhaust gas readings using a zirconia solid electrolyte element and a built-in heater to reach operating temperature quickly. It’s engineered as an original-equipment-style, plug-and-play replacement for vehicles with automatic transmissions, simplifying installation and restoring accurate fuel trimming and emissions feedback.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor restore engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe AFR oxygen sensor measures oxygen content in the exhaust and sends a voltage signal to the engine control unit for fuel mixture adjustments. By delivering accurate, consistent readings, it helps the ECU maintain the intended air–fuel ratio for smoother idling and better throttle response.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeated 4-wire design speeds warm-up for reliable early readings.\u003c\/li\u003e\n  \u003cli\u003eZirconia sensing element produces repeatable, high-resolution data.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit connector matches original factory plug—no splicing.\u003c\/li\u003e\n  \u003cli\u003eUpstream placement helps with primary fuel trim control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this Denso sensor a straightforward replacement?\u003c\/h3\u003e\n\u003cp\u003eThis unit is manufactured to match OE fit and function, so installation is typically bolt-in with the factory harness. The 10.63-inch harness length and four-wire configuration are tailored for compatibility with many auto-transmission-equipped models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-style plug lets you reconnect without cutting or rewiring.\u003c\/li\u003e\n  \u003cli\u003ePre-measured 10.63\" wire harness fits common upstream mounting locations.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit shell and threads align with factory ports for simple install.\u003c\/li\u003e\n  \u003cli\u003eComes tested for correct electrical output and heater operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and accurate is the 234-9001 sensor?\u003c\/h3\u003e\n\u003cp\u003eDenso designs its AFR sensors for longevity and stable output in harsh underhood conditions. Materials and construction resist thermal cycling and contamination to provide consistent performance over the sensor’s service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eZirconia solid electrolyte offers stable oxygen sensing characteristics.\u003c\/li\u003e\n  \u003cli\u003eHeater circuit supports rapid activation after cold starts.\u003c\/li\u003e\n  \u003cli\u003eCasing and seals built to withstand engine bay heat and vibration.\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet OEM quality specifications for reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Denso 234-9001 is intended for owners, DIY mechanics, and professional technicians who need a reliable upstream air–fuel ratio sensor replacement for auto-transmission vehicles. Choose this part when your vehicle reports oxygen sensor-related fault codes, exhibits rough idle or reduced fuel efficiency, or when you want an OE-style plug-and-play sensor with a precise zirconia element and a pre-attached 10.63\" 4-wire harness for fast installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Denso 234-9001 a direct plug-in replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s an OE-style direct-fit sensor with a 10.63\" 4-wire harness—no wire cutting required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor work on vehicles with automatic transmissions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 234-9001 is specified for use in auto-transmission equipped vehicles as an upstream AFR sensor.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":67585589936313,"sku":"B000C5WD2Q","price":338.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/denso-234-9001-front-packaging.jpg?v=1790473145"},{"product_id":"xinlidatech-oxygen-o2-sensor-kit-for-ford-f-150-2-7l-v6-2018-2020-4pc-oe-fit-prewired","title":"xinlidatech Oxygen O2 Sensor Kit for Ford F-150 2.7L V6 (2018–2020) — 4pc OE-fit, Prewired","description":"\u003cp\u003e\u003cstrong\u003eThis four-piece xinlidatech oxygen sensor kit replaces the upstream left\/right and both downstream O2 sensors for Ford F-150 2.7L V6 Turbocharged models from 2018–2020.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your F-150 is running the 2.7L EcoBoost V6 from model years 2018, 2019, or 2020, this complete sensor set is built to match the original equipment fitment and wiring length. The kit includes two upstream sensors (left and right) and two downstream sensors, designed to plug directly into the factory harness for most installations. These sensors replace part numbers 234-5174, 234-5173, and 234-8050 and are constructed with durable materials for resistance to heat and road exposure.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit match my truck's original equipment?\u003c\/h3\u003e\n\u003cp\u003exinlidatech engineered this set to mirror OE-style connectors and harness lengths so each sensor fits without cutting or splicing in typical installations. The sensors use the same mounting thread and electrical interface as the factory parts to simplify replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit connectors for plug-and-play installation\u003c\/li\u003e\n  \u003cli\u003eCorrect thread and sensor dimensions to match factory ports\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers 234-5174, 234-5173, 234-8050\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the materials and durability features?\u003c\/h3\u003e\n\u003cp\u003eThese O2 sensors combine a stainless steel housing with a ceramic sensing element to withstand high exhaust temperatures and corrosive conditions. They are manufactured under quality checks to provide consistent sensor response and longer in-service life compared with generic alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel body resists rust and road chemicals\u003c\/li\u003e\n  \u003cli\u003eCeramic sensing element for quick response to exhaust changes\u003c\/li\u003e\n  \u003cli\u003eTested to meet industry durability standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and engine configurations are compatible?\u003c\/h3\u003e\n\u003cp\u003eThe set is specifically intended for Ford F-150 trucks equipped with the 2.7L V6 Turbocharged (EcoBoost) engine from model years 2018, 2019, and 2020. Confirm your truck’s year and engine displacement before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: Ford F-150 Lariat, XL, XLT with 2.7L V6 Turbocharged (2018–2020)\u003c\/li\u003e\n  \u003cli\u003eVerify vehicle VIN or engine spec to match 2.7L EcoBoost\u003c\/li\u003e\n  \u003cli\u003eIncludes 1 upstream left, 1 upstream right, 2 downstream sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the package and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe package includes four prewired sensors: upstream left (234-5174), upstream right (234-5173), and two downstream sensors (234-8050). Most DIY mechanics can install these with common hand tools and a dedicated oxygen sensor socket; professional installation is an option if you prefer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTotal: 4 pieces — 2 upstream (left\/right) and 2 downstream\u003c\/li\u003e\n  \u003cli\u003eOE-style plugs and harness lengths reduce installation time\u003c\/li\u003e\n  \u003cli\u003eStandard sensor thread fits factory exhaust ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? This xinlidatech sensor kit is aimed at Ford F-150 owners and mechanics who need a full oxygen-sensor replacement for the 2.7L EcoBoost V6 (2018–2020). It’s ideal when replacing multiple sensors at once, prepping a vehicle for emissions testing, or restoring accurate air-fuel monitoring after exhaust repairs. Before purchasing, double-check your truck’s year and engine size to ensure proper fitment. If you have any questions about fit or installation, xinlidatech offers after-sales support to help resolve concerns promptly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors fit my 2019 Ford F-150 2.7L V6?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this set is designed for 2018–2020 Ford F-150 2.7L V6 Turbocharged models; confirm your engine is the 2.7L EcoBoost.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to splice wires to install these sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—xinlidatech sensors use OE-style connectors and correct harness lengths for plug-and-play installation in most cases.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"xinlidatech","offers":[{"title":"Default Title","offer_id":67585598685369,"sku":"B0G6DRYRNJ","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/xinlidatech-front-packaging-set.jpg?v=1790473706"},{"product_id":"dasbecan-flex-fuel-composition-sensor-for-chevy-gmc-2000-2005-direct-fit-ethanol-content-readout","title":"Dasbecan Flex Fuel Composition Sensor for Chevy GMC 2000–2005 — Direct-Fit, Ethanol Content Readout","description":"\u003cp\u003e\u003cstrong\u003eDasbecan Flex Fuel Composition Sensor accurately measures ethanol content so your compatible Chevy or GMC engine control module can adjust timing for smoother, more reliable operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis direct-fit replacement sensor is designed for select Chevy and GMC trucks and SUVs from the early 2000s. It reads the fuel’s ethanol concentration and sends a calibrated signal to the vehicle’s engine control unit (ECU). When installed correctly, the sensor helps the ECU optimize ignition timing and fuel trim for flex-fuel blends, reducing drivability issues that can cause rough starts or trigger fuel-related diagnostic trouble codes.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models and years does this sensor work with?\u003c\/h3\u003e\n\u003cp\u003eDasbecan engineered this sensor to match OE fit and electrical characteristics for a range of Chevy and GMC models. Confirm cross-reference part numbers or vehicle fitment before purchase to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement Part Numbers: 12570260, 10371025.\u003c\/li\u003e\n  \u003cli\u003eChevy: S10 (2000–2003), Silverado 1500 (2002–2005), Suburban 1500 (2002–2005), Tahoe (2002–2005), Avalanche 1500 (2005), Silverado 1500 Classic (2007).\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra 1500 (2002–2005), Sierra 1500 Classic (2007), Sonoma (2000–2003).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the flex fuel sensor improve vehicle performance?\u003c\/h3\u003e\n\u003cp\u003eThe sensor supplies real-time ethanol concentration data so the ECU can adjust ignition timing and fuel delivery for variable blends. Accurate readings help stabilize idle, reduce hesitation during start-up, and maintain efficient combustion when ethanol levels change.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnables ECU to correct timing and fuel trim for E85 and other blends.\u003c\/li\u003e\n  \u003cli\u003eReduces fueling-related drivability issues like rough idle or hard starts.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent false fuel composition diagnostic codes when functioning properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this sensor clear check-engine codes like P0178 or P0179?\u003c\/h3\u003e\n\u003cp\u003eReplacing a faulty flex fuel sensor can resolve codes tied to incorrect ethanol readings, but only if those codes stem from a bad sensor. Proper diagnosis is recommended to confirm the sensor is the root cause before replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon codes related to ethanol sensor faults include P0178 and P0179.\u003c\/li\u003e\n  \u003cli\u003eInstall the new sensor and verify code history with a scan tool after repair.\u003c\/li\u003e\n  \u003cli\u003eIf codes persist, inspect wiring, connectors, and fuel system components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what should I check during installation?\u003c\/h3\u003e\n\u003cp\u003eThe package includes one Dasbecan Flex Fuel Composition Sensor and is inspected for quality before shipping. For a reliable installation, verify part numbers, inspect the wiring harness and connector, and follow vehicle-specific torque and sealant recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contents: 1 × Flex Fuel Composition Sensor.\u003c\/li\u003e\n  \u003cli\u003eVerify compatibility using replacement numbers 12570260 or 10371025.\u003c\/li\u003e\n  \u003cli\u003eCheck connector pins, harness routing, and ECU compatibility during fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Dasbecan sensor is intended for DIY mechanics and professional technicians restoring fuel-sensing functionality on compatible early-2000s Chevy and GMC trucks and SUVs. Choose this part if you need a direct-fit ethanol sensor to help the vehicle’s ECU properly interpret flex-fuel mixtures and address fuel-composition related drivability or diagnostic issues.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor fit my 2003 Chevy Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the Dasbecan sensor lists compatibility with Chevy Silverado 1500 models from 2002–2005. Verify part numbers 12570260 or 10371025 for a match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can replacing the sensor clear a P0179 code?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If P0179 is caused by a faulty ethanol composition sensor, replacing it can clear the code. Confirm with a diagnostic scan before replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dasbecan","offers":[{"title":"Default Title","offer_id":67585600323769,"sku":"B08T1Q7TKF","price":173.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dasbecan-flex-fuel-sensor-front-view.jpg?v=1790473795"},{"product_id":"robinair-oxygen-sensor-for-r-1234yf-ac-machines-refrigerant-identifiers-part-16916-oem-direct-fit-restores-accuracy","title":"Robinair Oxygen Sensor for R-1234yf AC Machines \u0026 Refrigerant Identifiers — Part 16916, OEM Direct-Fit Restores Accuracy","description":"\u003cp\u003e\u003cstrong\u003eRobinair 16916 is the factory oxygen sensor designed as the direct, plug-and-play replacement for Robinair R-1234yf AC machines and refrigerant identifiers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your Robinair AC machine or refrigerant identifier signals a sensor warning or lockout, swapping in a genuine 16916 restores the unit’s original sensing accuracy and operational reliability. This sensor matches the exact specifications used at the factory, so installation is straightforward and the tool’s two-level sensor alerts function as intended: early life warnings followed by a fail-safe lockout if replacement is overdue.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor affect my Robinair R-1234yf machine’s performance?\u003c\/h3\u003e\n\u003cp\u003eThe oxygen sensor monitors residual oxygen to protect refrigerant purity and enable safe tank fills. A genuine Robinair 16916 maintains the calibrated thresholds used by the machine, preserving diagnostic accuracy and preventing false alarms or unnecessary downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores original factory sensing parameters for accurate readings\u003c\/li\u003e\n  \u003cli\u003ePrevents lockouts caused by degraded or incompatible sensors\u003c\/li\u003e\n  \u003cli\u003eEnsures consistent performance across different service cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the replacement and what should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eReplacement is designed to be simple and tool-friendly, following the maintenance steps in your machine’s owner manual. Once fitted, the machine recognizes the new sensor immediately and returns to normal operation with no complex recalibration required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for compatible Robinair models—no adapters needed\u003c\/li\u003e\n  \u003cli\u003eFollow owner manual maintenance section for step-by-step guidance\u003c\/li\u003e\n  \u003cli\u003eImmediate restoration of fill and recover functions after replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Robinair units are compatible with the 16916 oxygen sensor?\u003c\/h3\u003e\n\u003cp\u003eThe 16916 is the authentic replacement for a range of Robinair R-1234yf series AC machines and refrigerant identifiers. Using the OEM sensor guarantees the electrical and chemical specifications match the original design.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Robinair AC1234-4, AC1234-4SL, AC1234-4 230, AC1234-6, AC1234-9\u003c\/li\u003e\n  \u003cli\u003eCompatible with Robinair 16990 and 16995 refrigerant identifiers\u003c\/li\u003e\n  \u003cli\u003eAvoids compatibility problems common with aftermarket alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose a genuine Robinair sensor over aftermarket options?\u003c\/h3\u003e\n\u003cp\u003eAftermarket sensors may differ in sensitivity, lifespan, or connector compatibility, which can lead to false warnings, premature failures, or machine lockouts. The OEM 16916 is manufactured to Robinair’s original tolerances so the unit’s two-stage notification system works as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM tolerances minimize the risk of mismatched operating parameters\u003c\/li\u003e\n  \u003cli\u003eReduces chance of inaccurate readings or equipment downtime\u003c\/li\u003e\n  \u003cli\u003eSupports the device’s built-in maintenance and replacement alerts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians and workshop managers who service vehicles with R-1234yf systems and rely on Robinair AC machines or refrigerant identifiers will get the most value from the 16916. It’s aimed at professionals who want a fast, reliable sensor swap that preserves machine accuracy and avoids the uncertainty of non-OEM parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will my machine require recalibration after replacing the 16916 sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No recalibration is typically needed; the machine recognizes the genuine 16916 and resumes normal operation immediately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use aftermarket sensors instead of the Robinair 16916?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Aftermarket sensors can differ in specs and may cause inaccurate readings or lockouts; OEM 16916 ensures proper fit and performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Robinair","offers":[{"title":"Default Title","offer_id":67585605271737,"sku":"B07FDHJBQQ","price":727.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/robinair-16916-front-view.jpg?v=1790473996"},{"product_id":"bdfhyk-oxygen-sensor-set-for-nissan-rogue-altima-2010-2013-upstream-downstream-direct-fit-stainless-steel","title":"BDFHYK Oxygen Sensor Set for Nissan Rogue \u0026 Altima 2010–2013 — Upstream\/Downstream Direct-Fit, Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003eBDFHYK replacement oxygen sensor set fits Nissan Rogue and Altima 2010–2013 models, providing direct-fit upstream and downstream sensing to restore fuel trim and emissions monitoring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis BDFHYK oxygen sensor assembly is engineered as a direct replacement for the factory units listed by OE cross-references, made from high-temperature stainless steel and tested for reliable response and long life. It is offered as an upstream\/downstream option compatible with multiple Nissan 2.5L engines from 2010 through 2013, and is built to meet OE fitment and connector requirements for straightforward installation when proper tools and safety practices are used.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this oxygen sensor affect my car’s performance?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing a failing oxygen sensor helps the engine control unit get accurate air–fuel information, which supports smoother idling, consistent throttle response, and better emissions control. A correct sensor prevents prolonged rich or lean running that can harm catalytic converters and fuel economy.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRestores accurate oxygen readings to the ECU for correct fuel trim adjustments.\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize idle and reduce hesitation under acceleration.\u003c\/li\u003e\n  \u003cli\u003eProtects downstream emissions components by preventing incorrect fueling.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design reduces installation time and connector compatibility issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Nissan models and OE numbers does this part match?\u003c\/h3\u003e\n\n\u003cp\u003eThis sensor set fits Nissan Rogue and Altima 2.5L vehicles from model years 2010 to 2013, and corresponds to several common OEM part numbers for upstream and downstream locations. Refer to the vehicle’s service manual or pictures to confirm location and harness type before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Nissan Rogue 2.5L (2010–2013), Nissan Altima 2.5L (2010–2013).\u003c\/li\u003e\n  \u003cli\u003eReplacement OE references: 234-9036, 1821382Z50, 226931NA0A, 22693ZX70A.\u003c\/li\u003e\n  \u003cli\u003eAlso cross-referenced to: 234-4381, 22690ED000, 226A0EN21A.\u003c\/li\u003e\n  \u003cli\u003eVerify sensor location (upstream vs downstream) for correct selection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build qualities ensure durability?\u003c\/h3\u003e\n\n\u003cp\u003eBDFHYK sensors are constructed with corrosion-resistant stainless steel and high-temperature internal components designed to withstand exhaust conditions. Production testing focuses on response time and stability to ensure a functional lifespan comparable to or better than many aftermarket options.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStainless-steel housing to resist corrosion and heat exposure.\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature internal elements for consistent sensing response.\u003c\/li\u003e\n  \u003cli\u003eManufacturing tests for response speed and signal stability.\u003c\/li\u003e\n  \u003cli\u003eConnector and threads made to OE dimensions for proper sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I handle installation and safety?\u003c\/h3\u003e\n\n\u003cp\u003eThe sensor is manufactured to OE dimensions for a direct fit, but safe removal and installation require correct tools and care to avoid damaging threads or exhaust components. Allow the exhaust to cool fully and use an oxygen sensor socket or impact tools as recommended by repair guides.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWait until the exhaust system is cool to prevent burns.\u003c\/li\u003e\n  \u003cli\u003eUse a proper oxygen sensor socket or breaker bar; avoid damaging threads.\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs in the vehicle manual when tightening the sensor.\u003c\/li\u003e\n  \u003cli\u003eInspect wiring harness and connectors for corrosion before connecting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BDFHYK oxygen sensor set is suitable for DIYers and professional installers servicing Nissan Rogue or Altima 2.5L models from 2010–2013 who need a direct-replacement upstream or downstream unit. Choose this part if you want an OE-dimension sensor built with stainless steel and high-temperature materials, backed by a manufacturer that offers a limited quality assurance period and responsive support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor fit my 2012 Nissan Rogue 2.5L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This BDFHYK sensor set lists compatibility with Nissan Rogue 2.5L model years 2010–2013. Verify your vehicle’s connector and sensor location before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit come with a warranty or support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: BDFHYK offers a 6-month quality assurance period and customer support with responses typically within 48 hours.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BDFHYK","offers":[{"title":"Default Title","offer_id":67585683849401,"sku":"B0DD3CVJNY","price":108.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bdfhyk-front-packaging-sensor.jpg?v=1790475335"},{"product_id":"hitachi-camshaft-position-sensor-cps0008-direct-fit-oe-replacement-reliable-timing-signal","title":"Hitachi Camshaft Position Sensor CPS0008 — Direct-Fit OE Replacement, Reliable Timing Signal","description":"\u003cstrong\u003eHitachi CPS0008 is a brand-new camshaft position sensor engineered to restore accurate valve timing signals to your engine control unit for reliable ignition and fuel timing.\u003c\/strong\u003e\n\nThe camshaft position sensor is a small but critical engine sensor that tells the ECU the exact position and speed of the camshaft so fuel injection and ignition timing stay synchronized. Hitachi builds the CPS0008 to match original-equipment fit and electrical characteristics while using premium materials to resist heat, vibration, and contamination. This product is offered as a direct-replacement sensor suited to vehicles specified for the CPS0008 part number.\n\n\u003ch3\u003eHow does the CPS0008 affect engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe camshaft position sensor supplies timing reference data the ECU uses to sequence fuel injection and ignition. When the sensor performs correctly, the engine runs smoothly, starts consistently, and maintains efficient combustion timing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides precise camshaft angle and speed signals to the ECU.\u003c\/li\u003e\n  \u003cli\u003eHelps the ECU determine injector timing and spark event sequencing.\u003c\/li\u003e\n  \u003cli\u003eReduces misfires and rough idle when functioning properly.\u003c\/li\u003e\n  \u003cli\u003eMaintains consistent engine timing across operating temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the Hitachi CPS0008 fit my vehicle and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe CPS0008 is designed as a direct-fit replacement that follows OE dimensions and connector pinouts for compatible applications. Installation is typically straightforward — locate the camshaft sensor, unplug the harness, remove the mounting fastener, fit the new sensor, and reconnect.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-style electrical connector and mounting flange for bolt-on replacement.\u003c\/li\u003e\n  \u003cli\u003eSame electrical characteristics to avoid ECU reprogramming in most cases.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit reduces installation time and the need for adaptors.\u003c\/li\u003e\n  \u003cli\u003eRecommended torque and connector seal checks improve long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the signs the camshaft position sensor needs replacement?\u003c\/h3\u003e\n\u003cp\u003eFailing camshaft sensors produce detectable drivability symptoms because the ECU loses a reliable timing reference. Paying attention to these signs helps you replace the sensor before damage or prolonged poor performance occurs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntermittent or hard starting, especially when hot or cold.\u003c\/li\u003e\n  \u003cli\u003eEngine misfires, stalling, or rough idle under load.\u003c\/li\u003e\n  \u003cli\u003eCheck Engine light with related timing or camshaft codes.\u003c\/li\u003e\n  \u003cli\u003ePoor fuel economy or hesitation during acceleration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose Hitachi CPS0008 over aftermarket alternatives?\u003c\/h3\u003e\n\u003cp\u003eHitachi manufactures sensors to match the original specifications and to withstand automotive operating stresses. The CPS0008 emphasizes long-term stability, accurate signal output, and robust construction to minimize replacement frequency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% new unit made with premium components for durability.\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet or exceed OE performance and fitment standards.\u003c\/li\u003e\n  \u003cli\u003eTested to resist heat, vibration, and electromagnetic interference.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design reduces risk of electrical mismatch or mechanical interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for: The Hitachi CPS0008 is aimed at vehicle owners, professional mechanics, and DIY enthusiasts who need an exact-fit camshaft position sensor replacement to restore correct engine timing signals. It is appropriate for cars specified to use the CPS0008 part, fleets requiring consistent OEM-level performance, and anyone prioritizing reliable sensor readings and durable construction for long service intervals.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the CPS0008 a new or remanufactured sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Hitachi CPS0008 is a 100% new sensor, not remanufactured, built with fresh components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need ECU programming after installing this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installations do not require ECU reprogramming since CPS0008 matches OE electrical characteristics.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hitachi","offers":[{"title":"Default Title","offer_id":67585830813881,"sku":"B07X49VTFP","price":113.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/hitachi-cps0008-front-view.jpg?v=1790478420"},{"product_id":"delphi-crankshaft-position-sensor-ss10206-oem-grade-fit-durable-thermal-protection","title":"Delphi Crankshaft Position Sensor SS10206 — OEM-Grade Fit, Durable Thermal Protection","description":"\u003cp\u003e\u003cstrong\u003eDelphi SS10206 is a precision crankshaft position sensor that supplies accurate crank angle and engine speed data to the vehicle’s control module for dependable ignition timing and fuel management.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to Delphi's OEM-derived standards, the SS10206 is engineered for consistent signal output, thermal resilience, and long service life in modern gasoline engines. Delphi leverages decades of fuel and sensor expertise to produce replacement parts that match or exceed original equipment performance, offering digitally optimized outputs and robust protection against under-hood stresses.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SS10206 ensure accurate engine timing?\u003c\/h3\u003e\n\u003cp\u003eThe SS10206 uses a precisely engineered sensing gap and a digitally conditioned output to deliver clear crankshaft position pulses. That stable signal helps the engine control module determine ignition timing and injection events without false readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision sensing gap for consistent pulse generation\u003c\/li\u003e\n  \u003cli\u003eDigitally optimized signal-to-noise ratio\u003c\/li\u003e\n  \u003cli\u003eCompatible electrical output for most OEM control modules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat improves durability compared with older replacement sensors?\u003c\/h3\u003e\n\u003cp\u003eDelphi designs this sensor to withstand broad temperature swings and under-hood contaminants, reducing failure from heat or vibration. Materials and protective features reduce the risk of signal drift over time, extending reliable service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust housing to resist heat and mechanical stress\u003c\/li\u003e\n  \u003cli\u003eSealed construction against moisture and debris ingress\u003c\/li\u003e\n  \u003cli\u003eEngineered for long-term signal stability across operating ranges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sensor work with my vehicle’s engine control systems?\u003c\/h3\u003e\n\u003cp\u003eThe SS10206 is manufactured to meet or exceed original equipment electrical and mechanical specifications, providing compatible communication with most OEM engine control modules. Always verify fitment with your vehicle’s year, make, model and engine code prior to purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-quality electrical characteristics for plug-and-play operation\u003c\/li\u003e\n  \u003cli\u003eEngine-specific fitment listed by application cross-reference\u003c\/li\u003e\n  \u003cli\u003eSimple replacement procedure when matched to correct vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this sensor affect drivability and emissions?\u003c\/h3\u003e\n\u003cp\u003eBy restoring precise crankshaft position feedback, the SS10206 helps the engine control module optimize ignition and fuel injection timing, which supports smoother idle, more predictable throttle response, and stable combustion. Improved timing consistency can contribute to more controlled emissions behavior when the rest of the engine management system is functioning correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps reduce misfires and rough idling caused by faulty timing signals\u003c\/li\u003e\n  \u003cli\u003eSupports consistent fuel delivery and ignition timing adjustments\u003c\/li\u003e\n  \u003cli\u003eCan improve throttle response and overall engine smoothness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi SS10206 is intended for professional technicians and DIY enthusiasts looking for an OE-quality crankshaft position sensor replacement. It's appropriate for owners who need a durable, electrically compatible sensor to restore accurate timing signals—particularly vehicles experiencing erratic idle, poor throttle response, misfires, or diagnostic trouble codes related to crankshaft position. Verify vehicle compatibility before ordering and consult installation guides or a mechanic for diagnostic confirmation and proper fitting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm the SS10206 fits my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle’s year, make, model and engine code against the SS10206 fitment list or contact the seller for cross-reference before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does Delphi offer a warranty for this sensor on this site?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Warranty terms vary; products bought on this site carry the seller’s warranty, not Delphi’s standard limited warranty—review seller warranty details.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67585880129721,"sku":"B000CGG5SI","price":123.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-ss10206-front-view.jpg?v=1790479151"},{"product_id":"ransoto-o2-oxygen-sensor-set-4-pack-for-ford-f150-f250-f350-more-upstream-downstream-replacement","title":"RANSOTO O2 Oxygen Sensor Set - 4-Pack for Ford F150\/F250\/F350 \u0026 More, Upstream\/Downstream Replacement","description":"\u003cstrong\u003eRANSOTO O2 Oxygen Sensor 15717 set of four replaces upstream and downstream sensors for compatible Ford, Lincoln, Mazda and Mercury models to restore proper exhaust sensing and engine management.\u003c\/strong\u003e\n\n\u003cp\u003eThese RANSOTO oxygen sensors are aftermarket replacements designed to match factory fit and electrical connections for a broad range of Ford-platform vehicles plus select Lincoln, Mazda, Mercury and Jaguar models. Sold as a set of four, the kit includes items that correspond to common part numbers (15717, 15716, 15718 and 15719) so you can replace upstream and downstream sensors together and reduce diagnosis time. Each sensor is built to plug into the existing harness and provide the feedback your engine control unit expects for fuel trim and emissions monitoring.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors affect engine performance and diagnostics?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors report exhaust oxygen levels to the vehicle’s computer, which adjusts fuel delivery and ignition timing accordingly. Replacing worn or failing sensors can improve drivability, reduce rough idling and clear fault codes tied to fuel mixture. While these sensors help the ECU make better decisions, outcomes depend on overall engine condition and proper installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for common OEM part numbers to ensure correct signals.\u003c\/li\u003e\n  \u003cli\u003eTighter voltage response helps the ECU maintain proper air–fuel ratio.\u003c\/li\u003e\n  \u003cli\u003eReplacing all related sensors reduces the chance of residual fault codes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers are supported by this set?\u003c\/h3\u003e\n\u003cp\u003eThis four-pack covers many Ford models including F-150\/F-250\/F-350, Explorer, Ranger and Escape, plus multiple Lincoln, Mazda, Mercury and select Jaguar\/Aston Martin applications. It is intended to substitute listed OEM numbers, but you should confirm compatibility by checking your vehicle’s year, engine and existing sensor part number before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM numbers: 15717, 15716, 15718, 15719, 15664, ZZC318861, XR3Z9G444C.\u003c\/li\u003e\n  \u003cli\u003eFits Ford, Lincoln, Mazda, Mercury, Jaguar and some Aston Martin models — verify model year first.\u003c\/li\u003e\n  \u003cli\u003eSold as a set of four for upstream and downstream positions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires standard hand tools and possibly penetrating lubricant for older exhaust fittings. Each sensor is made to match the vehicle’s connector, but wire routing and heat shielding vary by model — follow a repair manual or OEM torque specs when fitting. After installation, clear any stored codes and perform a short drive cycle to let the ECU re-learn sensor characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck connector match and sensor thread size before tightening.\u003c\/li\u003e\n  \u003cli\u003eUse anti-seize only if manufacturer guidance allows; some pre-coated designs are ready to install.\u003c\/li\u003e\n  \u003cli\u003eClear engine fault codes and drive to verify proper operation and emissions readiness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, DIY mechanics and owners of compatible Ford, Lincoln, Mazda, Mercury or Jaguar vehicles who need an economical, full set replacement of both upstream and downstream oxygen sensors. This kit is especially useful when multiple sensors show age-related performance loss or when replacing one sensor reveals others close to end-of-life. If you are unsure about fitment, compare the vehicle’s current sensor part number and connector to the product listing before purchase. RANSOTO backs the kit with a one-year warranty and direct customer support for fitment or quality concerns.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this set replace both upstream and downstream oxygen sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the four-piece kit includes sensors intended for upstream and downstream positions to allow full-bank replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm these sensors fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your vehicle’s year, engine, and existing sensor part number to the listed OEM numbers and connector type before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"RANSOTO","offers":[{"title":"Default Title","offer_id":67585893204153,"sku":"B08PQTBCPY","price":108.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ransoto-front-packaging-oxygen-sensor-set.jpg?v=1790479417"},{"product_id":"hitachi-mass-air-flow-sensor-maf0031-black-1-46-1-82-3-57-in-oe-calibrated-airflow-sensor-for-restored-drivability","title":"Hitachi Mass Air Flow Sensor MAF0031 (Black, 1.46×1.82×3.57 in) — OE‑calibrated airflow sensor for restored drivability","description":"\u003cp\u003e\u003cstrong\u003eThe Hitachi MAF0031 Mass Air Flow Sensor accurately measures incoming air to maintain proper air-fuel balance and restore original engine drivability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned and manufactured to OEM-level standards by Hitachi, this compact black MAF sensor (1.46 x 1.82 x 3.57 inches) delivers consistent airflow readings through precision sensing elements and protected circuitry. Each unit is individually calibrated and 100% air-flow tested to help your vehicle meet factory emission specifications while offering long-term durability thanks to high-grade components and features like a contaminant bypass port where applicable.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this MAF sensor affect engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe MAF0031 provides the engine control unit with accurate airflow data so fuel delivery and ignition timing can be adjusted precisely. That helps restore the original throttle response and steady idle that vehicles had when new, without guessing or rough running.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecise airflow readings for correct air-fuel ratio\u003c\/li\u003e\n  \u003cli\u003eImproves drivability and throttle consistency\u003c\/li\u003e\n  \u003cli\u003eCalibrated for each application to match factory performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes Hitachi's design reliable and durable?\u003c\/h3\u003e\n\u003cp\u003eHitachi builds this sensor from premium materials and protects sensitive electronics to resist contamination and environmental stress. Components are chosen and tested to endure vibration, temperature swings, and exposure typical of engine compartments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProtected circuitry for longer-lasting operation\u003c\/li\u003e\n  \u003cli\u003eContaminant bypass port where applicable to prevent sensor fouling\u003c\/li\u003e\n  \u003cli\u003eIndividual part testing during manufacturing for consistent quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this unit identical to the original equipment (OE) part?\u003c\/h3\u003e\n\u003cp\u003eThe MAF0031 is produced to perform like OE, with Astemo\/Hitachi engineering and testing backing its fit and function. Each item is new (not remanufactured) and carries the design intent and tolerances required by vehicle manufacturers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-level performance and compatibility focus\u003c\/li\u003e\n  \u003cli\u003e100% new, never remanufactured components\u003c\/li\u003e\n  \u003cli\u003eCalibrated per application to meet manufacturer specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm fitment for my vehicle?\u003c\/h3\u003e\n\u003cp\u003eCheck your vehicle’s part cross-reference or use the seller’s fitment tool to match the MAF0031 to your make, model, and engine. Proper match ensures the sensor’s calibration and connector type are correct for plug-and-play installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse online cross-reference or part selection tool\u003c\/li\u003e\n  \u003cli\u003eVerify connector, mounting location, and part number before purchase\u003c\/li\u003e\n  \u003cli\u003eConsult vehicle repair manual or dealer for exact fit details\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hitachi MAF0031 is aimed at owners and technicians seeking an OEM-quality replacement that returns factory-like drivability and emissions performance. It’s appropriate for anyone wanting a brand-new, rigorously tested mass air flow sensor built with premium materials — especially when precision airflow measurement and durable electronics matter for long-term vehicle reliability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Hitachi MAF0031 new or remanufactured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The MAF0031 is 100% new, never remanufactured, and individually tested for airflow accuracy.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor fit my vehicle directly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fit depends on application—use the cross-reference or part selection tool to confirm correct match before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hitachi","offers":[{"title":"Default Title","offer_id":67585941340345,"sku":"B004SJS8Y4","price":151.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/hitachi-maf0031-front-view.jpg?v=1790480212"},{"product_id":"acdelco-throttle-position-sensor-gold-213-4668-88864359-premium-oem-fit-stable-signal","title":"ACDelco Throttle Position Sensor — Gold 213-4668 (88864359) Premium OEM-Fit, Stable Signal","description":"\u003cstrong\u003eACDelco Gold 213-4668 (88864359) is a premium aftermarket throttle position sensor (TPS) engineered to match factory fit and reliably report throttle-plate angle to your engine control system.\u003c\/strong\u003e\n\n\u003cp\u003eWhen the throttle plate changes position, the engine control module relies on accurate voltage or resistance signals to adjust fuel delivery and ignition timing. This ACDelco Professional Gold-series TPS is built as a high-quality replacement to meet or exceed original equipment specifications for fit, form, and function. It’s designed to be a direct bolt-on swap for compatible vehicles, simplifying repairs and restoring throttle signal accuracy without resorting to cheap, inconsistent parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this TPS restore proper engine response?\u003c\/h3\u003e\n\u003cp\u003eThe TPS provides the engine computer with precise information about throttle angle so the ECU can calculate the correct air-fuel mixture and ignition adjustments. Replacing a worn or erratic TPS removes false throttle readings that can cause hesitation, rough idle, or poor acceleration. ACDelco’s Gold line emphasizes consistent electrical output and durable materials for long-term stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-on mounting to match original bracket and alignment\u003c\/li\u003e\n  \u003cli\u003eStable signal output to reduce ECU errors and miscalculations\u003c\/li\u003e\n  \u003cli\u003eDurable housing and contacts for extended service life\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet or exceed strict quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my vehicle and how do I confirm compatibility?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on your vehicle’s year, make, model, and the OEM part number. The ACDelco Gold 213-4668 (88864359) is intended as a premium aftermarket replacement for specific applications—always cross-reference the part number with your vehicle’s factory service or parts catalog before purchase. Many sellers provide a fitment tool you can use by entering your VIN.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck OEM part numbers: 213-4668 or 88864359 for direct match\u003c\/li\u003e\n  \u003cli\u003eUse your vehicle VIN or year\/make\/model on retailer fitment tools\u003c\/li\u003e\n  \u003cli\u003eCompare electrical connector pin count and mounting bolt locations\u003c\/li\u003e\n  \u003cli\u003eContact seller or mechanic if unsure about fitment details\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a straightforward bolt-on procedure: disconnect the battery, unplug the sensor connector, unbolt the old sensor, and install the ACDelco replacement in the same orientation. After installation, some vehicles may require a throttle calibration or a minor ECU relearn routine to restore idle and throttle mapping. Periodic visual inspection of the connector and mounting can prevent future issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools required; no special machining or modifications needed\u003c\/li\u003e\n  \u003cli\u003eTorque mounting bolts to manufacturer specification to ensure alignment\u003c\/li\u003e\n  \u003cli\u003eInspect wiring harness and connector for corrosion before install\u003c\/li\u003e\n  \u003cli\u003ePerform ECU relearn or idle reset if recommended for your vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose ACDelco Gold instead of a generic replacement?\u003c\/h3\u003e\n\u003cp\u003eACDelco’s Gold line focuses on delivering consistent electrical characteristics and reliable mechanical fit so the replacement behaves like the original component. That consistency reduces troubleshooting time and the risk of repeat failures that can occur with lower-cost, variable-quality parts. Choosing a recognized brand can also simplify warranty or return processes if issues arise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to meet ACDelco specifications for performance and dependability\u003c\/li\u003e\n  \u003cli\u003eQuality controls to ensure fit, form, and function match expectations\u003c\/li\u003e\n  \u003cli\u003eTypically backed by established brand support and return policies\u003c\/li\u003e\n  \u003cli\u003eReduces the likelihood of sensor-related drivability complaints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ACDelco Gold 213-4668 (88864359) TPS is intended for vehicle owners, professional mechanics, and DIY enthusiasts who need a reliable, OEM-style throttle position sensor replacement. It suits those restoring proper throttle signaling on compatible cars, trucks, or SUVs and who prefer a branded aftermarket option that prioritizes fit and consistent electrical output over the lowest price.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know if 213-4668 (88864359) fits my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match the ACDelco part numbers 213-4668 or 88864359 with your OEM reference, or use your VIN in a parts-fit tool to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this TPS myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Installation is typically bolt-on with common tools; follow safety steps and perform any ECU relearn if your vehicle requires it.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ACDelco","offers":[{"title":"Default Title","offer_id":67585942421689,"sku":"B00496RG26","price":115.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/acdelco-tps-front-view.jpg?v=1790480232"},{"product_id":"qiybone-oxygen-o2-sensor-kit-4-pack-upstream-downstream-oe-fit-for-jeep-dodge-v6-v8","title":"QIYBONE Oxygen O2 Sensor Kit 4-Pack — Upstream \u0026 Downstream OE-Fit for Jeep, Dodge V6\/V8","description":"\u003cp\u003e\u003cstrong\u003eQIYBONE 4PCS oxygen sensor kit replaces upstream and downstream O2 sensors (234-4587 \/ 250-24253) for a broad range of Jeep, Dodge, Chrysler, Ram and compatible models from 2001–2023.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis four-piece sensor set includes both upstream (pre-catalytic) and downstream (post-catalytic) oxygen sensors engineered to match OE electrical and thread specifications for many V6 and V8 engines. Each sensor is built to monitor exhaust oxygen levels, communicate with the vehicle’s engine control unit (ECU), and provide input that helps the engine adjust fuel mixture. The kit ships ready to install and covers dozens of model-year\/engine combinations commonly found across Jeep, Dodge, Chrysler, Ram, Volkswagen Routan and Mitsubishi Raider platforms.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines will accept these QIYBONE O2 sensors?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed as a direct replacement for numerous engines and model years. Fitment spans multiple Jeep families (Wrangler, Grand Cherokee, Cherokee, Liberty, Patriot, Compass, Commander) and many Dodge and Chrysler vehicles including Charger, Challenger, Durango, Grand Caravan and 300. It also lists Ram pickups and vans, plus select Volkswagen and Mitsubishi models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJeep engines: 2.4L–6.4L coverage across 2001–2022 model years\u003c\/li\u003e\n  \u003cli\u003eDodge\/Chrysler: many 2.0L–8.4L engines from 2000–2023\u003c\/li\u003e\n  \u003cli\u003eRam, Volkswagen Routan, Mitsubishi Raider listed where applicable\u003c\/li\u003e\n  \u003cli\u003eCross-references: 234-4587, 250-24253 and many OEM numbers for quick lookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these sensors match original equipment (OE) specifications?\u003c\/h3\u003e\n\u003cp\u003eQIYBONE sensors are manufactured with matching thread size, heater circuits and connector types to simplify replacement without splicing. The design aims to provide reliable electrical resistance and response times similar to factory sensors so the ECU receives consistent oxygen-level data.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-style threads and sealing surfaces for leak-free installation\u003c\/li\u003e\n  \u003cli\u003eHeated elements integrated where required to meet warm-up performance\u003c\/li\u003e\n  \u003cli\u003ePluggable connectors to mate with existing vehicle wiring harnesses\u003c\/li\u003e\n  \u003cli\u003eSold as a set of four to replace both upstream and downstream sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat symptoms indicate a failing oxygen sensor and why replace with a full set?\u003c\/h3\u003e\n\u003cp\u003eCommon signs of a worn O2 sensor include erratic idle, reduced fuel economy, illuminated check-engine light, and trouble passing emissions tests. Replacing only one sensor can leave older mates mismatched; a full four-piece kit restores consistent sensor pairs and helps the ECU recalibrate fuel trims properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck-engine codes P013x, P014x, P015x often point to O2 issues\u003c\/li\u003e\n  \u003cli\u003eReplacing upstream and downstream sensors ensures balanced feedback loops\u003c\/li\u003e\n  \u003cli\u003eChanging sensors in matched sets can prevent drivability or emissions imbalances\u003c\/li\u003e\n  \u003cli\u003eIncludes part numbers for easy verification against existing OEM tags\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This QIYBONE 4PCS oxygen sensor kit is for professional mechanics, DIY enthusiasts and fleet owners who need a comprehensive OE-style replacement across multiple Chrysler, Dodge, Jeep and Ram applications. Choose this set when you want a matched upstream\/downstream solution that covers many engines and model years—especially useful when diagnostics identify multiple sensor failures or when restoring emissions performance after long-term service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2015 Jeep Grand Cherokee 3.6L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The QIYBONE 4PCS kit lists fitment for Jeep Grand Cherokee 3.6L model years including 2015. Verify connector and part numbers against your vehicle before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors include heating elements for fast warm-up?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set includes heated oxygen sensors where required to match OE warm-up characteristics for accurate ECU feedback.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QIYBONE","offers":[{"title":"Default Title","offer_id":67586236645561,"sku":"B0GVTK4CYJ","price":125.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/qiybone-front-view.jpg?v=1790481393"},{"product_id":"htmxja-oxygen-o2-sensor-4-piece-kit-for-ford-mazda-v6-3-0l-3-7l-upstream-downstream-direct-fit-replacement","title":"HTMXJA Oxygen O2 Sensor 4-Piece Kit for Ford \u0026 Mazda V6 (3.0L–3.7L) – Upstream \u0026 Downstream, Direct-Fit Replacement","description":"\u003cstrong\u003eHTMXJA 4-piece upstream and downstream oxygen sensor set replaces OE#234-5038 and 234-4490 to restore accurate air-fuel monitoring and emissions performance on compatible Ford and Mazda V6 vehicles.\u003c\/strong\u003e\n\n\u003cp\u003eThis complete four-sensor kit from HTMXJA is engineered as a direct-fit replacement for a wide range of Ford, Lincoln, Mercury and Mazda models with 3.0L–3.7L engines from model years 2010–2016. Each sensor follows OEM dimensions so installation requires no modification and plugs into factory harnesses. The set includes both upstream (pre-catalyst) and downstream (post-catalyst) sensors to give you full control of the engine control module's (ECM) oxygen feedback loop after a failure or when restoring emissions readiness.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engine combinations will accept these HTMXJA oxygen sensors?\u003c\/h3\u003e\n\u003cp\u003eThese sensors are labeled to fit many Ford and Mazda V6 petrol engines across model years 2010–2016. Always verify your vehicle’s OE part number against 234-5038 or 234-4490 and check connector style before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord Edge 3.7L \u0026amp; 3.5L (2011–2014)\u003c\/li\u003e\n  \u003cli\u003eFord F-150 and Mustang 3.7L (2011–2014)\u003c\/li\u003e\n  \u003cli\u003eExplorer 3.5L (2011–2015)\u003c\/li\u003e\n  \u003cli\u003eEscape\/Fusion\/Mariner\/Milan\/CX-9\/Tribute 3.0L–3.7L (2010–2015)\u003c\/li\u003e\n  \u003cli\u003eLincoln MKZ\/MKS\/MKX\/MKT and Mercury models listed in spec\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these sensors affect fuel economy and emissions monitoring?\u003c\/h3\u003e\n\u003cp\u003eWorn or failing oxygen sensors send incorrect voltage signals to the ECM, which can force the engine into an aggressive enrichment or lean strategy. Replacing faulty upstream and downstream sensors helps the ECM maintain the intended air-fuel ratio, improving combustion efficiency and helping the catalytic converter work as designed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct oxygen-voltage feedback for the ECM\u003c\/li\u003e\n  \u003cli\u003eHelps return engine control to factory fuel trims\u003c\/li\u003e\n  \u003cli\u003eSupports accurate downstream catalyst monitoring and OBD readiness\u003c\/li\u003e\n  \u003cli\u003eMay reduce rough idle and fuel-wasting conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and warranty details for HTMXJA sensors?\u003c\/h3\u003e\n\u003cp\u003eHTMXJA sensors are manufactured from corrosion-resistant materials and designed to meet OEM fit, form and connector specifications for straightforward installation. The kit comes with a six-month warranty and is intended as a plug-and-play replacement for listed OE reference numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable sensing element and stainless housing\u003c\/li\u003e\n  \u003cli\u003eFactory-style connector and wiring length for direct fit\u003c\/li\u003e\n  \u003cli\u003eSix-month limited warranty included\u003c\/li\u003e\n  \u003cli\u003eSold as a four-piece set to cover upstream and downstream positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and verify these oxygen sensors after replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically simple with common hand tools and a sensor socket; always allow the exhaust to cool before starting. After installation, clear any stored codes with an OBD-II scanner and perform a short test drive to confirm the ECU detects correct sensor operation and returns normal fuel trim values.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsure vehicle is cool; disconnect the battery per procedure\u003c\/li\u003e\n  \u003cli\u003eUse an oxygen sensor socket or crowfoot to avoid damage\u003c\/li\u003e\n  \u003cli\u003eClear codes and cycle the ignition to reset readiness monitors\u003c\/li\u003e\n  \u003cli\u003eVerify no exhaust leaks at threads and check for CEL absence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This HTMXJA four-pack is suited for DIY mechanics, independent repair shops and fleet owners who need a cost-effective, direct-replacement oxygen sensor solution for 2010–2016 Ford, Lincoln, Mercury and Mazda V6 models. Choose this kit when OE part numbers 234-5038 or 234-4490 match your vehicle and you want plug-in compatibility with OEM-style connectors and durable materials for reliable emissions and fuel-trim feedback.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these HTMXJA oxygen sensors fit my 2012 Ford Explorer 3.5L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit lists Explorer 3.5L for 2011–2015; confirm your OE number (234-5038 or 234-4490) before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers the HTMXJA O2 sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The sensors include a six-month limited warranty; save your purchase details for any warranty claims.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HTMXJA","offers":[{"title":"Default Title","offer_id":67586292580537,"sku":"B0F8GT7R14","price":148.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/htmxja-front-packaging-four-sensors.jpg?v=1790482222"},{"product_id":"zubaydee-oxygen-o2-sensor-for-honda-accord-cr-v-2-4l-2013-2017-direct-fit-oe-style-restores-air-fuel","title":"zubaydee Oxygen O2 Sensor for Honda Accord \u0026 CR-V 2.4L (2013–2017) — Direct-Fit OE-Style, Restores Air-Fuel","description":"\u003cp\u003e\u003cstrong\u003ezubaydee Oxygen O2 Sensor is a direct-fit replacement sensor engineered to restore accurate air-fuel readings for Honda 2.4L engines from selected model years.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement oxygen sensor is built to match the original equipment fitment and signal characteristics for specific Honda CR-V and Accord 2.4L models. It monitors exhaust oxygen levels and communicates with the engine control unit so the fuel trim and emissions systems can operate properly. Before ordering, confirm the OE part numbers (234-9131 or 234-4980) or verify vehicle compatibility to ensure correct fitment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this O2 sensor affect engine performance and emissions?\u003c\/h3\u003e\n\u003cp\u003eThe oxygen sensor helps the engine control unit maintain the right air-fuel mixture by reporting exhaust oxygen content. A functioning sensor supports more consistent idling, smoother throttle response, and more stable fuel economy. While not a cure-all, replacing a failed sensor often resolves diagnostic trouble codes and improves emissions readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides accurate oxygen-level feedback to the ECU\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize fuel trims and reduce rough idling\u003c\/li\u003e\n  \u003cli\u003eContributes to passing emissions inspections when faulty sensor was the issue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sensor fit my Honda Accord or CR-V?\u003c\/h3\u003e\n\u003cp\u003eThis zubaydee sensor is compatible with Honda CR-V 2.4L (2012–2019) and Honda Accord 2.4L (2013–2017) when the vehicle uses OE part numbers 234-9131 or 234-4980. Vehicle engine codes, production month, and factory options can affect fitment, so always cross-reference your VIN or existing part number before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models listed: CR-V (2012–2019), Accord (2013–2017)\u003c\/li\u003e\n  \u003cli\u003eConfirm by comparing OE part numbers 234-9131 \/ 234-4980\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle VIN or consult a parts professional for verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for a mechanically inclined owner or a technician: unplug the sensor connector, remove the old sensor with an oxygen sensor socket, then thread in and torque the new unit to specification. Use anti-seize on threads only if the manufacturer supplies it; avoid damaging the wiring or connector. Regular checks during routine service can help catch early failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires oxygen-sensor socket or appropriate hand tools\u003c\/li\u003e\n  \u003cli\u003eDisconnect battery and allow exhaust to cool before removal\u003c\/li\u003e\n  \u003cli\u003eReplace if diagnostic codes indicate sensor failure or drifting signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part compare to OEM and aftermarket options?\u003c\/h3\u003e\n\u003cp\u003ezubaydee supplies an OE-style replacement designed to match the original sensor’s electrical and mechanical characteristics without the premium OEM price. It’s intended as a direct fit alternative rather than a performance upgrade. Choose this unit when you need reliable restoration of factory-style sensor function at a value price point.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-part equivalent fit and signal output\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet factory connector and thread specifications\u003c\/li\u003e\n  \u003cli\u003eCost-effective replacement versus branded OEM units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and mechanics who own Honda CR-V (2012–2019) or Accord (2013–2017) 2.4L models and need a dependable, direct-fit oxygen sensor replacement. This product suits DIY enthusiasts comfortable with basic exhaust work, independent repair shops seeking OE-style parts, and anyone troubleshooting emissions or fuel-trim related check-engine lights. Verify your vehicle’s OE part number or VIN before ordering to ensure correct compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sensor fit Honda Accord 2.4L 2015?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits Accord 2.4L model years 2013–2017. Confirm OE part numbers 234-9131 or 234-4980 for a final match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this oxygen sensor myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, with basic tools and safety precautions. Use an oxygen-sensor socket and verify torque specs; seek a mechanic if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"zubaydee","offers":[{"title":"Default Title","offer_id":67586425028793,"sku":"B0FC35HC3S","price":119.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/zubaydee-front-packaging-sensor.jpg?v=1790483293"},{"product_id":"blpextrm-oxygen-o2-sensor-for-dodge-charger-ram-1500-upstream-downstream-direct-fit-fast-response","title":"BLPextrm Oxygen O2 Sensor for Dodge Charger \u0026 Ram 1500 – Upstream\/Downstream Direct-Fit, Fast Response","description":"\u003cp\u003e\u003cstrong\u003eThe BLPextrm Oxygen O2 Sensor (upstream and downstream) is a direct-fit replacement sensor designed to restore accurate oxygen readings and engine performance for compatible Dodge, Ram and Chrysler vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your check-engine light flags an O2 sensor fault, or your vehicle shows unstable idle, reduced fuel economy, or rough acceleration, a reliable upstream or downstream oxygen sensor can help the engine control module get accurate exhaust readings again. BLPextrm supplies sensors engineered to withstand high exhaust temperatures and deliver faster response times than worn originals, helping the vehicle manage air–fuel ratio and emissions more consistently.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this BLPextrm sensor replace?\u003c\/h3\u003e\n\u003cp\u003eThis sensor fits a wide range of Chrysler, Dodge, Jeep and Ram applications — including Charger, Avenger, Caravan, Challenger, Grand Cherokee, Wrangler, Ram 1500\/2500\/3500 and others. Always verify the vehicle year, engine position (upstream or downstream) and OEM part number before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include: Dodge Charger, Avenger, Caravan, Challenger, Ram 1500\/1500 Classic\/2500\/3500, Jeep Grand Cherokee, Wrangler, Cherokee, Chrysler 200\/300, Pacifica and more.\u003c\/li\u003e\n  \u003cli\u003eReplaces many OEM numbers such as 56029084AA, 56041698AA, 56044627AA and others listed by BLPextrm.\u003c\/li\u003e\n  \u003cli\u003eSold as upstream (pre-catalytic) and downstream (post-catalytic) fitments — confirm sensor location with vehicle repair manual or VIN lookup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the BLPextrm sensor constructed and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eThe sensor uses corrosion-resistant materials and internal elements built to tolerate harsh exhaust conditions. Materials selected for thermal stability allow continuous operation at elevated temperatures, improving longevity and stable output under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated to operate at temperatures up to approximately 650°C for reliable sensing in hot exhaust streams.\u003c\/li\u003e\n  \u003cli\u003eDesigned for fast response time to rapidly reflect changes in exhaust oxygen content.\u003c\/li\u003e\n  \u003cli\u003eRobust sealing and wiring to resist vibration, moisture and contaminants common in underbody locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat problems can installing this oxygen sensor help resolve?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failing O2 sensor can address drivability and emissions symptoms caused by inaccurate oxygen readings. While not a cure-all for unrelated engine issues, a good sensor helps the engine control unit make better fuel-trim decisions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces erratic idle, frequent stalling and hesitation caused by poor air–fuel mixture data.\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize fuel trims to improve fuel economy when the sensor provides accurate feedback.\u003c\/li\u003e\n  \u003cli\u003eRestores correct sensor signals for emissions testing readiness and catalytic converter monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose the correct upstream or downstream sensor for my vehicle?\u003c\/h3\u003e\n\u003cp\u003eMatch the new sensor to your vehicle’s exact model year, engine type and the OEM part number you are replacing. Upstream sensors are mounted before the catalytic converter; downstream sensors are after it — each has a different role in control strategy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm vehicle make, model, year and engine code, then cross-check the OEM part number list provided by BLPextrm.\u003c\/li\u003e\n  \u003cli\u003eLook at the physical sensor location on the exhaust manifold (upstream) versus after the cat (downstream) to ensure correct fitment.\u003c\/li\u003e\n  \u003cli\u003eUse an OBD-II scanner to view live sensor data and verify which bank or sensor number reports faults if unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BLPextrm oxygen sensor is intended for owners and mechanics seeking a cost-effective, direct-fit replacement for Chrysler, Dodge, Jeep and Ram vehicles experiencing O2 sensor-related faults. It suits DIYers familiar with basic under-vehicle service and professional shops needing a dependable aftermarket sensor that matches many OEM part numbers. Always verify fitment by comparing the vehicle’s part number, sensor location and connector style before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this BLPextrm sensor fit my Ram 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your Ram’s model year, engine and OEM part number against BLPextrm’s compatibility list before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I swap upstream and downstream sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — upstream and downstream sensors serve different roles; install the sensor designed for the specific exhaust position.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLPextrm","offers":[{"title":"Default Title","offer_id":67586449080505,"sku":"B09HK8SF9J","price":119.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blpextrm-front-packaging-sensor.jpg?v=1790483799"},{"product_id":"bosch-mass-air-flow-maf-sensor-0280218419-oe-replacement-pre-calibrated-housing-durable-performance","title":"Bosch Mass Air Flow (MAF) Sensor 0280218419 — OE Replacement, Pre-Calibrated Housing, Durable Performance","description":"\u003cp\u003e\u003cstrong\u003eThe BOSCH 0280218419 is a 100% new original-equipment mass air flow (MAF) sensor engineered to deliver precise air-mass readings for better fuel metering and reliable engine response.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBosch has supplied original equipment MAF sensors to vehicle manufacturers worldwide. This BOSCH 0280218419 MAF sensor combines a micromechanical sensing element, factory calibration and robust housing design to provide consistent airflow measurement, reduced sensor drift, and protection against moisture and particulates. Because the sensor and housing are matched and sold together (when applicable), installation is straightforward and the unit is ready to integrate with your vehicle’s engine control system.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this MAF sensor affect engine performance?\u003c\/h3\u003e\n\u003cp\u003eAccurate measurement of incoming air mass is critical for the engine control unit (ECU) to set fuel injection and ignition timing. The Bosch 0280218419 transmits reliable airflow data so the ECU can maintain efficient combustion, which helps preserve drivability and throttle response across operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMicromechanical sensor element for stable, repeatable readings\u003c\/li\u003e\n  \u003cli\u003eFactory calibration tuned to OE specifications\u003c\/li\u003e\n  \u003cli\u003eDesigned to minimize sensor drift over time\u003c\/li\u003e\n  \u003cli\u003eWorks with the vehicle ECU to optimize fuel delivery\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my car and is it easy to install?\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine Bosch OE part manufactured to meet fit, form and function specifications for compatible vehicles. Bosch MAF sensors are designed for direct replacement, often bolting into the original housing or supplied with a pre-calibrated housing when the part number includes it.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck vehicle compatibility by part number before ordering\u003c\/li\u003e\n  \u003cli\u003eSensor and housing are pre-calibrated when included, simplifying swap-out\u003c\/li\u003e\n  \u003cli\u003eTypical installation takes only minutes with basic hand tools\u003c\/li\u003e\n  \u003cli\u003eNo special programming usually required—direct plug-and-play\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is the BOSCH 0280218419?\u003c\/h3\u003e\n\u003cp\u003eBosch designs its OE MAF sensors to withstand real-world conditions including exposure to moisture and airborne particulates. A patented construction improves robustness and reduces the chances of contamination-related failure so the sensor maintains accuracy over a longer service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePatented design increases resistance to water and debris\u003c\/li\u003e\n  \u003cli\u003eReduced pressure drop helps preserve airflow integrity\u003c\/li\u003e\n  \u003cli\u003eAll units are 100% new—no remanufactured parts—ensuring consistent quality\u003c\/li\u003e\n  \u003cli\u003eManufactured under OE standards for long-term reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat technical features should I expect from this Bosch MAF?\u003c\/h3\u003e\n\u003cp\u003eThe Bosch 0280218419 features a specially developed micromechanical element to measure air mass precisely and relay that data to the ECU. The combination of sensor technology and housing calibration supports predictable engine behavior and emissions compliance when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMicromechanical sensor element for precise air-mass measurement\u003c\/li\u003e\n  \u003cli\u003eSensor and housing are calibrated together for accurate readings\u003c\/li\u003e\n  \u003cli\u003eManufactured to OE specifications for fit and function\u003c\/li\u003e\n  \u003cli\u003eSupports efficient combustion and engine performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BOSCH 0280218419 MAF sensor is aimed at vehicle owners, professional mechanics and DIY enthusiasts who need a reliable, factory-quality mass air flow replacement. It’s ideal for anyone seeking OE-level performance, straightforward installation and long-term durability in their engine management system. Always verify fitment for your vehicle by checking the part number before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the BOSCH 0280218419 a new or remanufactured unit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This BOSCH 0280218419 MAF sensor is 100% new, not remanufactured, ensuring original-equipment quality.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need to recalibrate the ECU after installing it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: In most cases no recalibration is required because the sensor and housing are factory-calibrated, but verify vehicle-specific instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":67586453373113,"sku":"B076WZCMVS","price":156.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bosch-maf-sensor-front-view_aea126ce-e91e-4edd-8749-5736ecca202c.jpg?v=1790483885"},{"product_id":"269-motorsports-100-psi-pressure-sensor-for-fuel-oil-coolant-stainless-steel-1-8-in-npt-gt150-connector","title":"269 Motorsports 100 PSI Pressure Sensor for Fuel\/Oil\/Coolant — Stainless Steel, 1\/8 in NPT \u0026 GT150 Connector","description":"\u003cp\u003e\u003cstrong\u003eThe Lowdoller Motorsports 100 PSI Pressure Sensor (PN 7990100) is a heavy-duty stainless steel pressure sender designed to monitor fuel, oil, or coolant pressure accurately in EFI and data-logging systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact sensor from 269 Motorsports combines durable materials and common electrical fittings to deliver reliable pressure readings across automotive and motorsports applications. Built with a 1\/8\" NPT thread and a GT150 Packard connector included, it installs easily into existing plumbing and wiring harnesses. The unit is suited for engine bays, racecars, and performance builds where consistent pressure feedback is required for tuning, logging, or gauge display.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor fit into my EFI or data-logging setup?\u003c\/h3\u003e\n\u003cp\u003eThe sensor outputs a pressure signal compatible with most aftermarket engine management and data-logging systems, allowing direct integration without custom adapters. The included GT150 Packard connector, pins, and grommets simplify wiring and reduce installation time. With a standard 1\/8\" NPT mechanical fit, it mounts into common pressure ports on fuel rails, oil galleries, or coolant lines designed for 1\/8\" threads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with EFI and data loggers that accept resistive or voltage pressure senders.\u003c\/li\u003e\n  \u003cli\u003eIncludes Packard GT150 connector plus pins and grommets for secure electrical connection.\u003c\/li\u003e\n  \u003cli\u003e1\/8\" NPT thread matches many factory and aftermarket pressure ports.\u003c\/li\u003e\n  \u003cli\u003eSignal stability suitable for tuning and real-time monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical and electrical qualities of the 7990100?\u003c\/h3\u003e\n\u003cp\u003eConstructed from stainless steel, the body resists corrosion and stands up to heat in engine compartments. The sensor is rated to 100 PSI, making it appropriate for a wide range of fuel, oil, and coolant pressure measurements. The supplier provides the common GT150 Packard electrical interface to ensure compatibility with automotive wiring practices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty stainless steel housing for long-term durability.\u003c\/li\u003e\n  \u003cli\u003ePressure rating: up to 100 PSI for versatile use cases.\u003c\/li\u003e\n  \u003cli\u003e1\/8\" NPT threaded connection for straightforward installation.\u003c\/li\u003e\n  \u003cli\u003eIncludes GT150 connector, pins, and grommets to complete the electrical fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools or materials are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for technicians and experienced DIYers familiar with pressure fittings. You’ll need standard tools for sealing and tightening 1\/8\" NPT fittings, and basic crimp or solder tools for wiring the Packard connector pins. Use compatible thread sealant or PTFE tape rated for fuel or oil systems as appropriate for the measured medium.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires standard wrench for 1\/8\" NPT fitting; torque to appropriate spec for your application.\u003c\/li\u003e\n  \u003cli\u003ePackard pins supplied; basic crimpers or solder equipment needed for electrical termination.\u003c\/li\u003e\n  \u003cli\u003eUse fuel\/oil-safe thread sealant or PTFE tape when installing in pressurized lines.\u003c\/li\u003e\n  \u003cli\u003eCheck wiring diagrams for your ECU or logger to match sensor signal expectations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? The 269 Motorsports Lowdoller 100 PSI Pressure Sensor PN 7990100 is aimed at performance builders, professional tuners, and motorsport teams who need a rugged, easy-to-integrate pressure sender for fuel, oil, or coolant systems. If you run aftermarket engine management, track your vehicle’s vitals with a data logger, or simply want a dependable pressure feed to a gauge, this sensor provides a compact, reliable option with industry-standard fittings and a durable stainless-steel build. Avoid using it outside its pressure rating and ensure the sensor’s electrical output matches your monitoring hardware before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this sensor compatible with my ECU or data logger?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your ECU\/logger accepts standard pressure sender signals; verify the sensor’s electrical output matches your device's input specifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this sensor for fuel, oil, and coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the 7990100 is rated for fuel, oil, and coolant applications up to 100 PSI when installed with proper seals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"269 Motorsports","offers":[{"title":"Default Title","offer_id":67586466545849,"sku":"B0BS4HF7XB","price":146.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/269motorsports-pressure-sensor-front-view.jpg?v=1790484174"},{"product_id":"wobiwina-oxygen-sensor-set-for-toyota-lexus-2-5l-upstream-downstream-234-9304-234-9307-restores-accurate-o2-readings","title":"Wobiwina Oxygen Sensor Set for Toyota\/Lexus 2.5L — Upstream \u0026 Downstream (234-9304\/234-9307) Restores Accurate O2 Readings","description":"\u003cp\u003e\u003cstrong\u003eWobiwina oxygen sensor set (234-9304 \u0026amp; 234-9307) is a two-piece upstream and downstream replacement designed to restore accurate O2 readings for specified Toyota and Lexus 2.5L models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle’s engine light points to an air-fuel or emissions sensor issue, this matched pair from Wobiwina offers a direct-fit aftermarket option for several Toyota and Lexus models. The pair replaces both pre- and post-catalyst oxygen sensors so the engine control unit receives consistent feedback on exhaust oxygen levels, which helps the vehicle manage fuel delivery and emissions systems (always verify vehicle fitment before purchase).\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines will accept this Wobiwina sensor set?\u003c\/h3\u003e\n\u003cp\u003eThis sensor set is produced to fit 2.5L engines in select model years. Confirm your vehicle’s year, engine size and existing sensor part numbers before ordering to ensure correct compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCamry: 2018–2023, 2.5L\u003c\/li\u003e\n  \u003cli\u003eAvalon: 2020–2022, 2.5L\u003c\/li\u003e\n  \u003cli\u003eRAV4: 2019–2024, 2.5L\u003c\/li\u003e\n  \u003cli\u003eLexus ES300h: 2019–2020, 2.5L\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these upstream and downstream sensors differ and why buy the set?\u003c\/h3\u003e\n\u003cp\u003eUpstream (pre-catalyst) sensors primarily guide fuel trim and combustion control, while downstream (post-catalyst) sensors monitor catalyst efficiency. Buying both at once ensures matched response characteristics and removes uncertainty about compatibility or remaining sensor life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes both upstream and downstream sensors (pre- and post-catalyst)\u003c\/li\u003e\n  \u003cli\u003eSold as a matched set for consistent ECU readings\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers 234-9304 and 234-9307\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I inspect before installing these oxygen sensors?\u003c\/h3\u003e\n\u003cp\u003eDouble-check that the OEM part numbers and connector type match your vehicle’s harness and that the engine code is 2.5L for the listed models. Inspect the harness plug, mounting threads, and oxygen sensor bung for corrosion or damage before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify existing part numbers and connector style\u003c\/li\u003e\n  \u003cli\u003eCheck threads and wiring harness for wear or heat damage\u003c\/li\u003e\n  \u003cli\u003eConfirm engine displacement and model year compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these sensors myself, and what tools or precautions are needed?\u003c\/h3\u003e\n\u003cp\u003eMany DIYers can replace oxygen sensors with basic tools, but proper safety and torque spec adherence are essential. Use an oxygen sensor socket or open-end wrench, anti-seize where recommended, and ensure the exhaust is cool before starting work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse an oxygen-sensor socket or suitable wrench\u003c\/li\u003e\n  \u003cli\u003eWork only on a cooled exhaust to avoid burns\u003c\/li\u003e\n  \u003cli\u003eApply anti-seize carefully if specified; avoid contaminating the sensor tip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Wobiwina 234-9304\/234-9307 upstream and downstream sensor set is intended for owners and technicians servicing the listed Toyota and Lexus 2.5L models who want a direct-fit aftermarket replacement. It’s useful for those addressing OBD-II trouble codes related to oxygen sensors or catalytic converter monitoring, and for anyone replacing both sensors to ensure uniform performance across the exhaust system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sensors direct replacements for OEM parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this set is made as direct-fit replacements for OEM part numbers 234-9304 and 234-9307 for the listed models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace both sensors at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replacing both upstream and downstream together ensures matched performance, though you can replace only the failed unit if preferred.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wobiwina","offers":[{"title":"Default Title","offer_id":67586484306105,"sku":"B0F32Y45RG","price":121.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wobiwina-front-packaging-box.jpg?v=1790484511"},{"product_id":"269-motorsports-150-psi-pressure-sensor-stainless-steel-0-5-4-5v-output-with-gt150-connector","title":"269 Motorsports 150 PSI Pressure Sensor — Stainless Steel, 0.5–4.5V Output with GT150 Connector","description":"\u003cp\u003e\u003cstrong\u003eThe Lowdoller Motorsports 150 PSI pressure sensor (PN 7990150) is a rugged 0–150 PSI stainless-steel transducer with a GT150 Packard connector, designed for fuel, oil, coolant and back-pressure monitoring in EFI and data-logging systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact sensor outputs a linear 0.5V to 4.5V signal compatible with common aftermarket ECU and logger platforms. Built with a heavy-duty stainless-steel body and a 1\/8\" NPT process thread, it provides a simple drop-in option for vehicles, test benches, or custom plumbing where reliable pressure feedback is required. The package includes the GT150 Packard connector, pins, and grommets; a pre-wired cable is available separately for quick installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor integrate with my EFI or data-logging system?\u003c\/h3\u003e\n\u003cp\u003eThe 0.5–4.5V output follows the same voltage scaling used by many tuners and loggers, making wiring straightforward. Most modern ECUs and loggers accept this voltage range directly on analog pressure inputs, so you can map pressure values without complex scaling conversions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect compatibility with Holley, Haltech, Racepak, FuelTech-style inputs\u003c\/li\u003e\n  \u003cli\u003eUses standard GT150 Packard connector for reliable electrical mating\u003c\/li\u003e\n  \u003cli\u003eLinear voltage output simplifies calibration and mapping\u003c\/li\u003e\n  \u003cli\u003ePrepares easily for aftermarket pre-wired harnesses or custom cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat physical features make this sensor suitable for automotive use?\u003c\/h3\u003e\n\u003cp\u003eThe sensor’s stainless-steel housing and 1\/8\" NPT thread are chosen for durability and common fitment in fluid systems. The compact form factor lets you mount it into fuel rails, oil galleries, coolant lines with available ports or into inline adapters for back-pressure measurements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty stainless-steel body resists corrosion from fluids\u003c\/li\u003e\n  \u003cli\u003e1\/8\" NPT thread matches typical pressure ports and adapters\u003c\/li\u003e\n  \u003cli\u003eRobust GT150 Packard connector with pins and grommets included\u003c\/li\u003e\n  \u003cli\u003eSmall footprint for tight engine-bay or test-rig installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich pressure ranges and applications is the 7990150 best for?\u003c\/h3\u003e\n\u003cp\u003eRated 0–150 PSI, this transducer covers a wide variety of automotive pressure checks without overkill for most street, race, and bench setups. It works well where pressures remain below 150 PSI such as fuel rails on high-performance engines, typical oil pressures, coolant system tests, and exhaust or intake back-pressure checks when adapted correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel pressure monitoring up to 150 PSI\u003c\/li\u003e\n  \u003cli\u003eOil pressure sensing for most performance engines\u003c\/li\u003e\n  \u003cli\u003eCoolant system pressure checks and leak diagnostics\u003c\/li\u003e\n  \u003cli\u003eBack-pressure and boost-related measurements with proper adaptors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Lowdoller Motorsports 150 PSI Pressure Sensor PN 7990150 is aimed at tuners, race shops, DIY engine builders, and data-loggers who need a compact, industry-compatible pressure transducer that installs easily and communicates clean analog voltage to ECUs and loggers. If you require a durable sensor with standard electrical scaling, included connector hardware, and broad compatibility with aftermarket systems, this unit is a practical choice. Note: pre-wired harnesses are sold separately; choose the appropriate cable for your ECU or logger input. Always confirm port threads and pressure range suit your intended application before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the voltage output compatible with my ECU?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 0.5–4.5V output matches the common scaling used by many ECUs and loggers like Holley, Haltech, and Racepak.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the sensor come pre-wired?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The GT150 connector, pins, and grommets are included; a pre-wired cable is sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"269 Motorsports","offers":[{"title":"Default Title","offer_id":67586531852473,"sku":"B0BS4FPV37","price":146.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lowdoller-front-profile-pressure-sensor.jpg?v=1790486073"},{"product_id":"delphi-ignition-knock-sensor-as10017-oe-calibrated-detonation-sensor-shielded-2-wire-piezoelectric","title":"Delphi ignition knock sensor AS10017 — OE-calibrated detonation sensor, shielded 2-wire, piezoelectric","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi AS10017 is an OE-calibrated ignition knock (detonation) sensor that senses combustion knock and delivers clean, reliable signals to your engine control module for optimized ignition timing and engine protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Delphi knock sensor is built on a century of OE engineering and testing to match factory-level performance and durability. It uses a piezoelectric sensing element that generates its own signal, a ground-isolated two-wire shielded harness to resist electromagnetic interference, and a wide frequency calibration so a single design can reliably detect knock across multiple engine applications and fuel types.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the AS10017 detect and report engine knock?\u003c\/h3\u003e\n\u003cp\u003eThe sensor converts vibration from pre-ignition or detonation into an electrical signal the engine control module interprets to adjust ignition timing. Its piezoelectric element produces a self-generated output, while the shielded two-wire harness and ground-isolated construction help preserve signal integrity under noisy conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePiezoelectric core provides self-powered knock signal generation.\u003c\/li\u003e\n  \u003cli\u003eGround-isolated design minimizes electrical noise and false readings.\u003c\/li\u003e\n  \u003cli\u003eShielded two-wire connector ensures consistent signal transmission.\u003c\/li\u003e\n  \u003cli\u003eCalibrated across a broad frequency range for accurate detection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sensor work across different engines and fuels?\u003c\/h3\u003e\n\u003cp\u003eDelphi engineered the AS10017 with a flat frequency response so the same sensor design performs reliably on multiple gasoline engine applications. It’s calibrated to detect knock events beyond the primary operating range, which helps maintain consistent engine management when fuel composition or operating conditions vary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-style calibration supports varied engine platforms.\u003c\/li\u003e\n  \u003cli\u003eWideband frequency response captures different knock characteristics.\u003c\/li\u003e\n  \u003cli\u003eSuitable for engines subject to varying loads and fuel qualities.\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet or exceed OE performance requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and compatibility details should I know?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically involves mounting the sensor to the engine block where it can best sense combustion-induced vibration and connecting the shielded two-wire harness to the vehicle harness. Delphi provides OE-level diagnostics and training resources, but confirm fitment for your specific year, make, and model before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounts directly to the engine block for optimal vibration sensing.\u003c\/li\u003e\n  \u003cli\u003e2-wire shielded connector matches OE harness styles on many applications.\u003c\/li\u003e\n  \u003cli\u003eNo external power required; sensor is self-generating.\u003c\/li\u003e\n  \u003cli\u003eAlways verify part compatibility with vehicle application data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the AS10017 help with emissions and engine management?\u003c\/h3\u003e\n\u003cp\u003eBy delivering precise knock information to the control module, the sensor helps the ECU adjust ignition timing to promote efficient combustion and protect components from damaging detonation. While not an emissions device itself, its accurate feedback supports engine control strategies that can maintain proper emissions performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnables ignition timing adjustments to reduce knock risk.\u003c\/li\u003e\n  \u003cli\u003eSupports combustion stability across driving conditions.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain engine operation that aligns with emissions control systems.\u003c\/li\u003e\n  \u003cli\u003eContributes to consistent performance with varying fuels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers, mechanics, and DIY enthusiasts looking for a durable, OE-quality knock sensor replacement that restores factory-style knock detection and signal integrity. If you need a robust, calibrated sensor for accurate knock sensing across multiple engine conditions—backed by Delphi’s OE engineering—this part is designed for those seeking dependable performance and straightforward fitment. Note: products purchased through Amazon may be subject to seller-specific warranties; review warranty details with the seller at purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the AS10017 need an external power source?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The AS10017 uses a piezoelectric element that generates its own signal and requires no external power.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one sensor design cover multiple engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its flat frequency response and OE calibration let the same design be used across many gasoline engine applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67586533589177,"sku":"B000CGHTC4","price":116.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-as10017-front-view.jpg?v=1790486142"},{"product_id":"hitachi-crankshaft-position-sensor-cps0006-new-oe-quality-multicolor-accurate-rpm-timing","title":"Hitachi Crankshaft Position Sensor CPS0006 - New OE-Quality Multicolor, Accurate RPM \u0026 Timing","description":"\u003cp\u003e\u003cstrong\u003eThe Hitachi CPS0006 is a 100% new, OE-quality crankshaft position sensor engineered to deliver accurate engine speed and position signals for reliable ignition and fuel control.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eHitachi’s CPS0006 crankshaft position sensor is part of the brand’s line of vehicle sensors designed to supply precise electrical input to the Engine Control Unit (ECU). Built from premium materials and manufactured to meet original equipment standards, this sensor replaces worn or failing units to restore proper engine timing, smoother idle, and improved drivability. It is produced new — not remanufactured — and tested to match OE performance and longevity expectations for the specified applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the CPS0006 affect engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe crankshaft position sensor communicates the crankshaft’s rotational speed and position to the ECU, which uses that data to time ignition and fuel injection. A precise signal reduces misfires, rough idle, and hesitation during acceleration. Choosing a sensor that matches OE tolerances helps maintain consistent engine behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides accurate crank angle and RPM information to the ECU\u003c\/li\u003e\n  \u003cli\u003eSupports consistent ignition timing and injector sequencing\u003c\/li\u003e\n  \u003cli\u003eHelps prevent stalling, misfires, and erratic idle\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet OE durability and performance standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sensor fit my vehicle and how is it installed?\u003c\/h3\u003e\n\u003cp\u003eThe CPS0006 is designed for specific vehicle applications; confirm compatibility with your year, make, and model before purchase. Installation typically involves unplugging the electrical connector, removing the retaining bolt, and fitting the new sensor into the crankcase or timing cover. Proper alignment and a clean mounting surface ensure accurate readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck vehicle fitment using make\/model\/year and OEM part cross-reference\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools required; installation time varies by vehicle\u003c\/li\u003e\n  \u003cli\u003eReplace sealing O-ring or gasket if applicable for leak-free fit\u003c\/li\u003e\n  \u003cli\u003eReconnect wiring harness and clear stored ECU codes after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key quality and performance features of this Hitachi sensor?\u003c\/h3\u003e\n\u003cp\u003eHitachi supplies sensors to vehicle manufacturers and builds the CPS0006 to meet those original equipment specifications. It arrives brand new — never rebuilt — and undergoes manufacturing controls to ensure signal stability and long service life. The unit’s materials and internal electronics are selected for resistance to heat, vibration, and engine bay contaminants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTier 1 OE supplier quality and production standards\u003c\/li\u003e\n  \u003cli\u003e100% new component — not remanufactured\u003c\/li\u003e\n  \u003cli\u003eEngineered for fast, accurate measurement response\u003c\/li\u003e\n  \u003cli\u003eDurable against temperature and vibration in engine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I tell when the crankshaft position sensor needs replacement?\u003c\/h3\u003e\n\u003cp\u003eSymptoms of a failing crankshaft position sensor include intermittent stalling, difficulty starting, erratic idling, and diagnostic trouble codes related to crankshaft or camshaft position. Because many symptoms overlap with other systems, confirm failure with diagnostic tests or a replacement check. Using an OE-grade sensor like the CPS0006 minimizes the chance of recurring issues from an inferior aftermarket part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngine stalls or loses power unexpectedly\u003c\/li\u003e\n  \u003cli\u003eHard starts or no-start condition intermittently\u003c\/li\u003e\n  \u003cli\u003eCheck Engine light with crankshaft\/camshaft position codes\u003c\/li\u003e\n  \u003cli\u003eRough or irregular idle that improves after replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Hitachi CPS0006 is aimed at professional mechanics, DIY enthusiasts, and fleet operators seeking a new, OE-level crankshaft position sensor to restore precise engine timing. It suits anyone replacing a failed sensor who wants parts built to original manufacturer standards and durable enough for daily driving and demanding operating conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Hitachi CPS0006 a new or remanufactured part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The CPS0006 is 100% new, never remanufactured, built to original equipment specifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to clear codes after installing this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, clear any stored ECU codes after installation and verify the code doesn’t return during test drive.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hitachi","offers":[{"title":"Default Title","offer_id":67586535424185,"sku":"B07X6BFBMZ","price":121.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/hitachi-cps0006-front-view.jpg?v=1790486191"},{"product_id":"higherbro-oxygen-o2-sensor-pair-upstream-downstream-replacement-for-2014-2020-hyundai-kia-direct-fit-with-1-year-warranty","title":"higherbro Oxygen O2 Sensor Pair — Upstream \u0026 Downstream Replacement for 2014–2020 Hyundai\/Kia, Direct-Fit with 1-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eThe higherbro 2PCS Oxygen O2 Sensor set includes one upstream and one downstream sensor engineered to restore accurate air-fuel readings and emissions performance on compatible Hyundai and Kia models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two replacement O2 sensors are built to match factory fitment for several 2014–2020 Hyundai and Kia vehicles. They connect to the vehicle’s exhaust system to monitor oxygen levels before and after the catalytic converter, helping the engine control unit adjust fuel delivery. Each set ships with both sensors — one upstream (pre-catalytic converter) and one downstream (post-catalytic converter) — and is backed by a 1-year unlimited mileage quality guarantee.\u003c\/p\u003e\n\n\u003ch3\u003eWhich cars are these higherbro sensors compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis pair fits a range of Hyundai and Kia models across specific engine sizes and model years. Verify part numbers and your vehicle’s year\/engine before purchasing to ensure a direct, bolt-in replacement without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2014–2016 Hyundai Elantra 1.8L\u003c\/li\u003e\n  \u003cli\u003e2015–2016 Hyundai Elantra 2.0L\u003c\/li\u003e\n  \u003cli\u003e2018–2020 Hyundai Kona 2.0L\u003c\/li\u003e\n  \u003cli\u003e2019–2020 Hyundai Tucson 2.0L\u003c\/li\u003e\n  \u003cli\u003e2014–2016 Kia Forte 1.8L\u003c\/li\u003e\n  \u003cli\u003e2019–2020 Kia Forte 2.0L\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do upstream and downstream O2 sensors differ and why both matter?\u003c\/h3\u003e\n\u003cp\u003eThe upstream sensor measures oxygen in exhaust gases as they leave the engine to help the ECU set the correct fuel mixture, while the downstream sensor monitors catalytic converter efficiency. Replacing both sensors at once ensures accurate feedback on both fuel control and emissions aftertreatment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream: controls real-time air-fuel adjustments.\u003c\/li\u003e\n  \u003cli\u003eDownstream: checks converter performance and emissions output.\u003c\/li\u003e\n  \u003cli\u003eReplacing both prevents mismatched sensor readings and check-engine triggers.\u003c\/li\u003e\n  \u003cli\u003eFactory-style connectors and lengths for proper installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and performance expectations?\u003c\/h3\u003e\n\u003cp\u003eThese sensors are designed for a direct swap with factory locations using original-style connectors and wiring pigtails. Typical installation requires standard hand tools and about 30–90 minutes depending on vehicle access; a torque-specified O2 sensor socket is recommended for reliable sealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement with OEM-style connectors.\u003c\/li\u003e\n  \u003cli\u003eRequires removal of old sensors and threading into original ports.\u003c\/li\u003e\n  \u003cli\u003eUse anti-seize compound only where specified; avoid contaminating sensing tip.\u003c\/li\u003e\n  \u003cli\u003eAfter installation, clear any stored codes and confirm proper operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the warranty cover and how long does it last?\u003c\/h3\u003e\n\u003cp\u003ehigherbro includes a 1-year unlimited mileage quality guarantee with this 2-piece O2 sensor set. The warranty protects against manufacturing defects and premature failure under normal use; it does not cover damage from improper installation, abuse, or vehicle modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1-year coverage with unlimited mileage.\u003c\/li\u003e\n  \u003cli\u003eCovers manufacturing defects and function failure.\u003c\/li\u003e\n  \u003cli\u003eExclusions: misuse, physical damage, or aftermarket modifications.\u003c\/li\u003e\n  \u003cli\u003eContact higherbro support with proof of purchase for warranty claims.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This higherbro 2PCS O2 sensor set is aimed at DIY mechanics, independent repair shops, and vehicle owners who need an affordable, direct-fit replacement for oxygen sensors on compatible Hyundai and Kia models. Choose this kit when you want OEM-style connectors, matched upstream\/downstream sensors, and the reassurance of a one-year quality guarantee for dependable emissions and fuel-trim feedback.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors fit my 2016 Hyundai Elantra 1.8L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This 2PCS set lists compatibility with the 2014–2016 Hyundai Elantra 1.8L as a direct-fit replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace both upstream and downstream sensors at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replacing both ensures matched readings and prevents future check-engine codes, though you can replace a single failed sensor if only one is defective.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"higherbro","offers":[{"title":"Default Title","offer_id":67586544795833,"sku":"B0G2KY9B25","price":119.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/higherbro-front-packaging-o2-sensors.jpg?v=1790486602"},{"product_id":"bosjinlai-o2-oxygen-sensor-kit-for-chevy-silverado-suburban-tahoe-2008-2014-upstream-downstream-direct-fit","title":"BOSJINLAI O2 Oxygen Sensor Kit for Chevy Silverado Suburban Tahoe (2008–2014) — Upstream \u0026 Downstream, Direct Fit","description":"\u003cp\u003e\u003cstrong\u003eHigh-precision BOSJINLAI oxygen sensors (upstream and downstream) replace worn units on Chevy, GMC, and Cadillac V8\/V6 trucks from 2008–2014 for reliable air-fuel feedback and smoother running.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your check engine light, fuel economy, or idle quality has changed, oxygen sensors are a common wear item on older GM trucks and SUVs. This BOSJINLAI kit includes upstream and downstream O2 sensors engineered to match OEM fitment for Chevrolet Silverado, Tahoe, Suburban, Avalanche, GMC Sierra and Yukon XL, and Cadillac Escalade models with 4.8L–6.2L engines across the 2008–2014 model years. Each sensor is built from durable materials, bench-tested, and designed for direct swap installation to restore accurate exhaust oxygen readings to the engine control module.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these BOSJINLAI O2 sensors affect engine performance?\u003c\/h3\u003e\n\n\u003cp\u003eOxygen sensors measure exhaust oxygen content so the engine computer can adjust fuel delivery. Fresh sensors deliver quicker, more consistent voltage responses, helping the ECU maintain proper air-fuel ratio and reducing hunting or rough idling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProvides faster signal response for improved fuel trims.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce unwanted fuel enrichment or lean conditions.\u003c\/li\u003e\n  \u003cli\u003eSupports stable idle and smoother throttle transitions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this set replace?\u003c\/h3\u003e\n\n\u003cp\u003eThese BOSJINLAI sensors are specified for a range of GM V8 and V6 trucks and SUVs from 2008–2014. They are intended as direct-fit replacements for many common GM O2 part numbers—check compatibility with your VIN before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Chevy: Silverado, Tahoe, Avalanche, Suburban 1500\/2500\/3500 HD (4.8L–6.2L).\u003c\/li\u003e\n  \u003cli\u003eFits GMC: Sierra, Yukon XL, 1500\/2500\/3500 HD (2008–2012 overlap models).\u003c\/li\u003e\n  \u003cli\u003eFits Cadillac Escalade 6.0L\/6.2L (2008–2014) and replaces OE numbers listed by your vehicle fit guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and testing details of BOSJINLAI sensors?\u003c\/h3\u003e\n\n\u003cp\u003eEach sensor is manufactured from selected materials and assembled to withstand under-hood heat and vibration. Before shipping, sensors are bench-tested so you receive parts that meet electrical and response specifications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDurable sensing element and protective shroud for extended life.\u003c\/li\u003e\n  \u003cli\u003ePre-tested for output consistency and rapid response time.\u003c\/li\u003e\n  \u003cli\u003eDesigned for bolt-in installation; plugs match factory connectors on compatible models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these O2 sensors myself, and what should I know?\u003c\/h3\u003e\n\n\u003cp\u003eThese sensors are offered as direct replacements for technicians and DIYers. Basic hand tools, anti-seize on threads (if not pre-applied), and a torque wrench for final tightening are recommended; avoid overtightening to protect the sensor housing and wiring.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for straightforward swap with factory harness.\u003c\/li\u003e\n  \u003cli\u003eRecommended clearance and heat-shield checks during install.\u003c\/li\u003e\n  \u003cli\u003eIf codes persist after fitment, recheck wiring, exhaust leaks, and ECU resets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and repair shops servicing 2008–2014 GM trucks and SUVs who need reliable replacement upstream and downstream oxygen sensors to restore accurate exhaust sensing and improve drivability. Choose this BOSJINLAI O2 sensor set if you want OE-style fitment, tested performance, and compatibility across common Silverado, Sierra, Tahoe, Suburban, Yukon, Avalanche, and Escalade V6\/V8 applications. Before purchase, confirm fitment with your vehicle's year, engine size, and VIN to ensure the proper sensor configuration for your model.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these BOSJINLAI sensors fit my 2010 Chevrolet Silverado 1500 5.3L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your Silverado is within the listed years and engine sizes; verify compatibility by entering your VIN or vehicle details before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these oxygen sensors come pre-tested?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, each BOSJINLAI sensor is bench-tested prior to shipping to ensure proper electrical output and response.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BOSJINLAI","offers":[{"title":"Default Title","offer_id":67586559738041,"sku":"B0G4W5MBXC","price":131.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bosjinlai-front-packaging-o2-sensors.jpg?v=1790486994"},{"product_id":"denso-o2-oxygen-sensor-234-4622-4-wire-12-6-harness-direct-fit-for-lexus-toyota-pontiac","title":"Denso O2 Oxygen Sensor 234-4622 — 4-Wire 12.6\" Harness, Direct-Fit for Lexus\/Toyota\/Pontiac","description":"\u003cstrong\u003eThe Denso 234-4622 is a direct-replacement narrow-band oxygen (O2) sensor with a 4-wire, 12.60-inch harness designed to restore accurate air-fuel monitoring on compatible Lexus, Toyota and Pontiac models.\u003c\/strong\u003e\n\n\u003cp\u003eThis replacement sensor is engineered to meet original-equipment tolerances so it installs cleanly and performs reliably. Built with corrosion-resistant stainless steel, a refined zirconia sensing element and Denso’s aluminum oxide trap layer, it resists contamination and responds quickly to changes in exhaust oxygen levels. The 234-4622 fits a wide range of vehicles — including select Lexus ES300\/ES300h and NX models, Pontiac Vibe, and many Toyota sedans, SUVs and coupes — making it a practical choice for routine maintenance or targeted repairs.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this sensor replace?\u003c\/h3\u003e\n\u003cp\u003eThe Denso 234-4622 is listed for many Lexus, Toyota and Pontiac applications across different years. It also cross-references several factory part numbers and aftermarket interchange codes for easy verification before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact Denso part: 234-4622\u003c\/li\u003e\n  \u003cli\u003eCompatible models include Lexus ES300 (1995–1998), ES300h (2013–2018), NX200t\/NX300\/NX300h (various years), Pontiac Vibe (2009–2010), Toyota Camry, Corolla, RAV4, Avalon, 4Runner, Matrix, Sienna, Solara, Paseo and Tercel across listed years.\u003c\/li\u003e\n  \u003cli\u003eParts interchange examples: 88975496, 8946502340, 8946533450 and other OEM cross-reference numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this Denso sensor protect the engine and improve drivability?\u003c\/h3\u003e\n\u003cp\u003eWhile it’s not a fix-all, a functioning oxygen sensor helps the engine control unit (ECU read) maintain correct air-fuel ratios, which supports smoother idle and consistent performance. Denso’s construction and filter features reduce the chance of sensor poisoning so it keeps accuracy longer than untreated elements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum oxide trap layer guards the ceramic element from silicone and lead contamination.\u003c\/li\u003e\n  \u003cli\u003ePTFE filtering helps block particles that can degrade sensor response.\u003c\/li\u003e\n  \u003cli\u003eRefined zirconia element yields faster, more precise oxygen readings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the 234-4622 easy to install and what are its physical details?\u003c\/h3\u003e\n\u003cp\u003eThis part is made as a direct fit replacement with a 4-wire harness and a 12.60-inch lead so it lines up with factory connectors in the specified vehicles. The sensor’s compact dimensions and stainless steel housing simplify installation and help it withstand the under-hood environment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWiring: 4-wire harness, 12.60 inches long for OEM connector compatibility.\u003c\/li\u003e\n  \u003cli\u003eConstruction: corrosion-resistant stainless steel housing for durability.\u003c\/li\u003e\n  \u003cli\u003eDimensions \u0026amp; weight: approx. 5.75 x 2.19 x 1.88 inches, 0.25 lb; sold individually.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace an oxygen sensor and what performance changes should I expect?\u003c\/h3\u003e\n\u003cp\u003eReplace a sensor if the vehicle shows a persistent check engine light tied to O2 sensor codes, rough idle, or if fuel economy noticeably worsens. Installing a correct, well-built replacement like the 234-4622 helps restore accurate oxygen monitoring and stabilize fuel trim adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon replacement triggers: diagnostic trouble codes, poor fuel economy, rough running or failed emissions tests.\u003c\/li\u003e\n  \u003cli\u003eExpected improvements: steadier idle, more consistent combustion control, and more reliable emission readings for diagnostics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Automotive technicians, DIY mechanics and fleet managers who need a dependable, OE-quality narrow-band oxygen sensor for select Lexus, Toyota and Pontiac vehicles. If you require a precise fit, OEM cross-reference compatibility and contamination protection in a long-lasting sensor, the Denso 234-4622 is built for routine maintenance and targeted repairs where OEM-level performance is expected.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the 234-4622 fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check the listed year\/make\/model compatibility and OEM cross-reference numbers; match your vehicle’s original part number to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sensor require programming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is needed—this is a direct-fit replacement with a factory-style 4-wire harness for plug-and-play installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":67586560852153,"sku":"B000C5SGA4","price":145.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/denso-234-4622-front-view.jpg?v=1790487042"},{"product_id":"htmxja-oxygen-o2-sensors-for-2005-2006-honda-cr-v-l4-2-4l-2-piece-upstream-downstream-replacement-oe-reference-fit","title":"HTMXJA Oxygen O2 Sensors for 2005-2006 Honda CR-V L4 2.4L — 2-Piece Upstream \u0026 Downstream Replacement, OE-Reference Fit","description":"\u003cp\u003e\u003cstrong\u003eHTMXJA 2Pcs upstream and downstream oxygen sensors replace the factory O2 units for 2005–2006 Honda CR-V 2.4L engines to restore accurate air-fuel sensing and emission regulation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two replacement oxygen sensors are designed to match the referenced OE numbers and fit the L4 2.4L CR-V models from 2005 and 2006. They monitor exhaust oxygen content both before and after the catalytic converter, providing the engine control module with the data needed to adjust fuel delivery and help keep emissions within design targets. Each sensor arrives with a threaded housing, wiring harness connector, and protective elements engineered for typical automotive conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these O2 sensors affect drivability and fuel management?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn oxygen sensors can help the engine computer make better real-time adjustments to fuel mixture, which may improve throttle response and reduce uneven idling. Sensors that read closer to expected values enable more consistent combustion trims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides fresh input to the engine control module for accurate fuel trims\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize idle and responsiveness under load\u003c\/li\u003e\n  \u003cli\u003eCan reduce excess fuel usage caused by a faulty sensor reading\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these sensors compatible with my 2005–2006 Honda CR-V?\u003c\/h3\u003e\n\u003cp\u003eThese HTMXJA oxygen sensors are specified for Honda CR-V L4 2.4L models from 2005 and 2006 and match the OE reference numbers commonly associated with those vehicles. Always verify part numbers and connector types against your vehicle before ordering to confirm fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 2005–2006 CR-V with 2.4L L4 engines\u003c\/li\u003e\n  \u003cli\u003eCross-references OE numbers: 250-241123, 250241123, 250-54046, 25054046\u003c\/li\u003e\n  \u003cli\u003eUpstream and downstream sensors included to replace both bank positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable working under the vehicle: disconnect the old sensor, unplug the connector, remove the threaded unit, and install the replacement. Use the correct torque on the sensor thread and check for secure electrical connections; no special tuning is required after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical hand tools and an oxygen-sensor socket or wrench are sufficient\u003c\/li\u003e\n  \u003cli\u003eReconnect wiring harness and secure any protective sleeves\u003c\/li\u003e\n  \u003cli\u003eNo ECU reprogramming needed; ECU will relearn from new sensor signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does HTMXJA provide?\u003c\/h3\u003e\n\u003cp\u003eHTMXJA backs these oxygen sensors with a six-month warranty and offers customer support for fitment questions or product concerns. If the product does not meet expectations, HTMXJA requests contact so they can assist and respond within 24 hours.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix-month limited warranty included\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for compatibility checks before purchase\u003c\/li\u003e\n  \u003cli\u003eSupport response typically within 24 hours for replacements or troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These replacement oxygen sensors suit DIY car owners, independent repair shops, and fleet technicians who maintain 2005–2006 Honda CR-V vehicles with the 2.4L L4 engine and need both upstream and downstream units. They are intended for buyers who want an OE-referenced substitute that restores proper oxygen sensing without modifying engine management systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors fit both upstream and downstream positions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This kit includes two sensors intended to replace both upstream and downstream positions on 2005–2006 CR-V 2.4L models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is any ECU programming required after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is necessary; the vehicle computer will relearn values from the new sensors during normal operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HTMXJA","offers":[{"title":"Default Title","offer_id":67586562097337,"sku":"B0DP1ZCRBP","price":117.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/htmxja-front-packaging-oxygen-sensors.jpg?v=1790487110"},{"product_id":"yaopei-o2-oxygen-sensor-4-pack-for-chevrolet-gmc-v8-1996-2002-2x234-4012-2x234-4018-direct-fit-stainless-steel","title":"YAOPEI O2 Oxygen Sensor 4-Pack for Chevrolet GMC V8 1996-2002 (2x234-4012 + 2x234-4018) — Direct-Fit Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003eYAOPEI 4-pack oxygen sensors replace upstream and downstream units (2 x 234-4012 + 2 x 234-4018) for many Chevrolet, GMC and select Cadillac V8 models from 1996–2002.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit provides a complete set of front and rear O2 sensors engineered as direct-fit replacements for a wide range of trucks, SUVs and vans. Each sensor is made with stainless steel housings and anti-oxidant coatings for corrosion resistance and stable performance at high exhaust temperatures. The set includes two upstream (pre-catalyst) and two downstream (post-catalyst) units so you can restore original-style sensor coverage in one service visit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and years does this YAOPEI O2 sensor kit serve?\u003c\/h3\u003e\n\n\u003cp\u003eThe 4-pack is designed to fit many Chevrolet and GMC full-size trucks, SUVs and vans from the late 1990s through the early 2000s, plus some Cadillac Escalade models. Compatibility lists include specific model ranges—verify your vehicle year, make, model and engine before ordering to ensure a correct match.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Avalanche, C\/K trucks, Silverado, Suburban, Tahoe, Express vans (various years 1996–2002)\u003c\/li\u003e\n  \u003cli\u003eGMC: C\/K trucks, Sierra, Yukon\/Yukon XL, Savana vans (1996–2002 ranges)\u003c\/li\u003e\n  \u003cli\u003eCadillac: Escalade V8 5.7 (1999–2000) and V8 5.3 (2002)\u003c\/li\u003e\n  \u003cli\u003eCheck interchange numbers 9617178, 234-4012, SG454, SG236, 13474, 234-4018 for guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these replacement sensors compare to OEM units?\u003c\/h3\u003e\n\n\u003cp\u003eYAOPEI oxygen sensors are built to meet the fit and function of original equipment using durable stainless steel housings and protective coatings. They are laser-welded and sealed against moisture to improve longevity in harsh exhaust environments, while response characteristics are tuned for reliable signal switching.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDual laser-welded stainless steel construction for leak-free housings\u003c\/li\u003e\n  \u003cli\u003eAnti-oxidant coating to resist corrosion and high-temperature degradation\u003c\/li\u003e\n  \u003cli\u003eTested before packing to ensure proper electrical and sensing response\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on design — no cutting, splicing or reprogramming required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing these O2 sensors?\u003c\/h3\u003e\n\n\u003cp\u003eBefore purchase and installation, confirm the sensor plug, thread size and connector shape match your factory parts. Inspect interchange part numbers and compare product photos to your vehicle’s existing sensors; differences in plug or wiring can prevent fitment even when fitment lists match your model year.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirm year\/make\/model\/position and cross-reference listed part numbers\u003c\/li\u003e\n  \u003cli\u003eCompare the connector plug in the product photos to your vehicle’s harness plug\u003c\/li\u003e\n  \u003cli\u003eReplace sensors in pairs (upstream\/downstream) per bank where recommended\u003c\/li\u003e\n  \u003cli\u003eUse anti-seize on threads only if specified by install instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what does the package include?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable working under the vehicle with basic hand tools. These sensors are supplied as a set of four—two upstream and two downstream—so you can complete a full sensor refresh for many dual-bank engines without multiple orders.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePackage contains 4 PCS: 2 x 234-4018 and 2 x 234-4012 (2 front, 2 rear)\u003c\/li\u003e\n  \u003cli\u003eStraight bolt-on replacement—no vehicle modification required\u003c\/li\u003e\n  \u003cli\u003ePre-tested units reduce risk of out-of-box failures\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle service manual torque and sensor removal guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 4-pack is intended for owners and technicians who need a full bank refresh of oxygen sensors on late-1990s to early-2000s Chevrolet, GMC or compatible Cadillac V8 vehicles. It’s a practical choice for fleet maintenance, DIY truck or SUV owners, and repair shops seeking direct-fit, corrosion-resistant replacements that match common OEM interchange numbers. If you aren’t certain about fitment, confirm connector type and part numbers before purchase or contact us for assistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both front and rear oxygen sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains four sensors: two upstream (front) and two downstream (rear).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How can I confirm these sensors fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your year\/make\/model and compare the connector plug and interchange numbers listed before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAOPEI","offers":[{"title":"Default Title","offer_id":67586563178681,"sku":"B0B2QQPSDB","price":125.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yaopei-front-sensor-pair.jpg?v=1790487176"},{"product_id":"qiybone-o2-oxygen-sensors-for-toyota-2-5l-2-pack-upstream-downstream-oem-fit-stainless-steel","title":"QIYBONE O2 Oxygen Sensors for Toyota 2.5L — 2‑Pack Upstream \u0026 Downstream, OEM Fit Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003eQIYBONE O2 sensors are a two-piece upstream and downstream replacement set engineered to restore accurate air‑fuel monitoring for compatible Toyota, Lexus and Scion 2.5L four‑cylinder models from 2011–2018.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 2‑pack includes one upstream (pre‑cat) and one downstream (post‑cat) oxygen sensor manufactured from stainless steel and heat‑resistant materials to withstand under‑hood conditions. Designed to meet OEM fit and electrical specifications, the sensors plug into existing vehicle harnesses and help the engine control unit (ECU) read exhaust oxygen levels for better fuel trim and emissions control. Reference OE numbers are provided so you can verify fitment against your original parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors report the amount of oxygen in exhaust gases so the ECU can adjust fuel delivery. Replacing worn or failing sensors returns accurate feedback to the engine management system, which helps stabilize idle, reduce excess fuel use, and maintain smoother acceleration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct air‑fuel ratio readings for precise fuel trims\u003c\/li\u003e\n  \u003cli\u003eReduces rough idling and hesitation caused by faulty sensor data\u003c\/li\u003e\n  \u003cli\u003eHelps maintain catalytic converter efficiency by ensuring proper combustion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers are compatible with this QIYBONE set?\u003c\/h3\u003e\n\u003cp\u003eThis pair fits Toyota Camry (2012–2017) 2.5L L4, Toyota Avalon (2013–2018) 2.5L L4, Toyota RAV4 (2013–2018) 2.5L L4 (non‑hybrid), Scion tC (2011–2016) 2.5L, and Lexus ES300h (2013–2018) 2.5L. Cross‑reference the supplied OE and aftermarket numbers before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream reference: 250‑54084, 350‑64031, OS5579 and equivalents\u003c\/li\u003e\n  \u003cli\u003eDownstream reference: 250‑24360, 234‑4622, ES20327 and related numbers\u003c\/li\u003e\n  \u003cli\u003eCompare connector shape and pin count to your original sensor picture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and durability features of these sensors?\u003c\/h3\u003e\n\u003cp\u003eQIYBONE sensors use stainless steel housings and high‑temperature materials in the sensing element and seals to resist corrosion and heat cycling. The double protection design and quality sealing extend service life compared with lower‑grade replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel body resists rust and mechanical damage\u003c\/li\u003e\n  \u003cli\u003eHigh‑temperature resistant internals tolerate exhaust heat and contaminants\u003c\/li\u003e\n  \u003cli\u003eFactory‑style sealing and plug ensure a weatherproof connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what should I check first?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be plug‑and‑play following OEM layout: unplug the old sensor, remove it with the correct socket, and install the new unit. Always compare the connector, thread pitch and sensor length to the original part before installation to avoid mismatch.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to OEM dimensions for direct replacement\u003c\/li\u003e\n  \u003cli\u003eRequires common tools like an O2 sensor socket or wrench\u003c\/li\u003e\n  \u003cli\u003eVerify electrical connector and sensor thread match your vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This QIYBONE oxygen sensor pair is aimed at owners and independent mechanics servicing compatible Toyota, Lexus and Scion 2.5L four‑cylinder models who need a reliable, cost‑effective replacement for failing upstream or downstream O2 sensors. It’s suitable for drivers troubleshooting check‑engine P013x\/P014x or lean\/rich fuel trim codes, fleets maintaining older cars, and DIYers who prefer OEM‑style fitment without dealer prices.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors fit my 2015 Toyota Camry 2.5L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This QIYBONE 2‑pack includes sensors compatible with 2012–2017 Camry 2.5L models; verify connector and OE number match your original.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sensors direct replacements or do they require programming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed as direct OEM‑style replacements and do not require programming—just physical installation and clearing any stored codes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QIYBONE","offers":[{"title":"Default Title","offer_id":67586563670201,"sku":"B0GGJ1SBRY","price":125.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/qiybone-front-packaging-oxygen-sensor.jpg?v=1790487196"},{"product_id":"a-premium-oxygen-sensor-pair-for-acura-tsx-honda-accord-2-4l-upstream-downstream-4-wire-heated-m18","title":"A-Premium Oxygen Sensor Pair for Acura TSX \u0026 Honda Accord 2.4L — Upstream \u0026 Downstream 4‑Wire Heated M18","description":"\u003cp\u003e\u003cstrong\u003eThe A-Premium Upstream and Downstream O2 Oxygen Sensor pair replaces factory units to restore accurate air-fuel readings for Acura TSX 2009–2013 and Honda Accord 2008–2012 2.4L engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two heated oxygen sensors from A-Premium are designed as direct-fit replacements for the upstream (pre-catalytic) and downstream (post-catalytic) positions on compatible Acura and Honda 2.4L inline-4 models. Built with a 4-wire heated design and standard M18 threaded mounting, the set delivers the electrical and physical compatibility needed for hassle-free swapping with OE-style connectors and proven reference numbers.\u003c\/p\u003e\n\n\u003ch3\u003eWill this sensor set fit my Acura TSX or Honda Accord?\u003c\/h3\u003e\n\u003cp\u003eThe A-Premium pair is specifically made for Acura TSX 2009–2013 and Honda Accord 2008–2012 with the L4 2.4L engine. Check the part reference numbers and connector style against your vehicle to confirm fitment before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Acura TSX (2009–2013) and Honda Accord (2008–2012) L4 2.4L\u003c\/li\u003e\n  \u003cli\u003eOE reference numbers: 36532-R40-A01 \/ 250-24833 \/ 250-54110\u003c\/li\u003e\n  \u003cli\u003eConnector: female, 4-wire heated configuration\u003c\/li\u003e\n  \u003cli\u003eThread: standard M18 threaded mounting for direct replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these sensors improve engine performance and diagnostics?\u003c\/h3\u003e\n\u003cp\u003eAccurate oxygen sensors help the engine control unit (ECU make better fuel-trim adjustments by measuring exhaust oxygen before and after the catalytic converter. Replacing worn sensors with correct-spec units restores sensor responsiveness and can reduce rough idling, poor fuel economy, and false emissions readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream sensor monitors exhaust oxygen for fuel control\u003c\/li\u003e\n  \u003cli\u003eDownstream sensor checks catalytic converter efficiency\u003c\/li\u003e\n  \u003cli\u003eHeated design reduces warm-up time for faster accurate readings\u003c\/li\u003e\n  \u003cli\u003eReturn to correct fuel trims and more reliable emissions diagnostics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical details I should know before installing?\u003c\/h3\u003e\n\u003cp\u003eEach kit includes two threaded, heated oxygen sensors with female connectors and 4 wires. Wire lengths differ for proper location—about 350mm for the upstream sensor and 250mm for the downstream—so routing and connector reach match factory harnesses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains: 2x oxygen sensors in box packaging\u003c\/li\u003e\n  \u003cli\u003eWire count: 4 wires per sensor (heated type)\u003c\/li\u003e\n  \u003cli\u003eLengths: upstream ≈ 350 mm, downstream ≈ 250 mm\u003c\/li\u003e\n  \u003cli\u003eThread size: M18 for OE-style mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable are these sensors and what warranty is included?\u003c\/h3\u003e\n\u003cp\u003eA-Premium builds these sensors from durable materials intended to meet long-term underhood exposure and thermal cycles. The set is supported by a one-year unlimited-mileage guarantee for buyer confidence, and the product ships in protective box packaging for safe delivery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable construction to withstand exhaust conditions\u003c\/li\u003e\n  \u003cli\u003eQuick, tool-minimal installation replicates factory fit\u003c\/li\u003e\n  \u003cli\u003eBacked by A-Premium one-year unlimited-mileage warranty\u003c\/li\u003e\n  \u003cli\u003eBox packaging protects components in transit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This A-Premium oxygen sensor pair is aimed at do-it-yourself mechanics, independent repair shops, and vehicle owners who need an exact-fit replacement for their Acura TSX (2009–2013) or Honda Accord (2008–2012) 2.4L. It’s suited for anyone troubleshooting check-engine codes related to O2 sensors or catalytic performance, or those restoring fuel economy and emissions operation to factory-like behavior without complex modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors fit my 2010 Honda Accord 2.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this A-Premium upstream and downstream sensor pair fits 2008–2012 Honda Accord 2.4L models, including 2010, with the correct 4-wire female connectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the wiring heated and what are the lengths?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Both sensors are 4-wire heated types. The upstream cable is about 350mm and the downstream cable about 250mm for proper factory routing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67586568519865,"sku":"B0C1B8NWGC","price":146.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-upstream-downstream-front-view.jpg?v=1790487423"},{"product_id":"ntk-ignition-knock-sensor-id0213-vehicle-specific-replacement-with-shielded-harness-and-sealed-housing","title":"NTK Ignition Knock Sensor ID0213, Vehicle-Specific Replacement with Shielded Harness and Sealed Housing","description":"\u003cp\u003e\u003cstrong\u003eNTK ID0213 is a vehicle-specific ignition knock (detonation) sensor that detects engine knock using a durable piezoelectric element and sends real-time vibration signals to the ECM to help protect the engine.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis NTK knock sensor replaces the factory unit on compatible vehicles and monitors engine vibration so the engine control module (ECM) can adjust ignition timing. Built with a sealed housing, advanced piezo ceramic technology and a shielded harness, the ID0213 reproduces OEM fit and function while resisting moisture and electrical interference. Common symptoms that indicate replacement include an illuminated check engine light, rough idling, reduced fuel economy or failed emissions checks.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the NTK ID0213 detect and report engine knock?\u003c\/h3\u003e\n\u003cp\u003eThe sensor uses a piezoelectric crystal that produces a voltage proportional to vibration intensity when detonation occurs. That voltage becomes a signal the ECM analyzes to decide whether to retard ignition timing to reduce knock events. Installation location on the engine block ensures direct vibration transfer for accurate detection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePiezo ceramic element generates vibration-dependent voltage\u003c\/li\u003e\n  \u003cli\u003eSealed housing limits moisture intrusion for consistent signals\u003c\/li\u003e\n  \u003cli\u003eShielded harness reduces electrical noise to the ECM\u003c\/li\u003e\n  \u003cli\u003eVehicle-specific fit ensures correct mounting and orientation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat symptoms mean the knock sensor should be replaced?\u003c\/h3\u003e\n\u003cp\u003eTypical signs include a persistent check engine light, engine hesitation or pinging under load, degraded fuel economy and difficulty passing emissions tests. Those symptoms can stem from a weak or failed sensor, wiring issues, or genuine detonation that the ECM can’t mitigate without accurate input.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck engine lamp with knock-related fault codes\u003c\/li\u003e\n  \u003cli\u003eNoticeable engine pinging or hesitation during acceleration\u003c\/li\u003e\n  \u003cli\u003eSudden drop in fuel efficiency or drivability\u003c\/li\u003e\n  \u003cli\u003eFailed emissions scan linked to ignition timing faults\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does NTK ID0213 match OEM specifications and improve durability?\u003c\/h3\u003e\n\u003cp\u003eThe ID0213 is manufactured to match original connector layout, harness length and wire gauge so it installs like the factory sensor. Internally sealed construction and advanced piezo ceramic material increase resistance to heat, oil and moisture—common causes of early failure. The shielded harness also prevents interference that could corrupt knock signals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact harness length and gauge as original equipment\u003c\/li\u003e\n  \u003cli\u003eFully sealed sensor body for moisture protection\u003c\/li\u003e\n  \u003cli\u003eShielding on wiring to reduce electrical noise\u003c\/li\u003e\n  \u003cli\u003eHigh-durability piezo ceramic element for reliable output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should be considered during installation and troubleshooting?\u003c\/h3\u003e\n\u003cp\u003eProper torque, clean mounting surface and intact wiring are essential for accurate knock detection. Replace the sensor if diagnostic trouble codes point to knock-sensor faults and verify connector pins and ground continuity. If knock persists after replacement, inspect ignition timing, fuel quality and engine mechanical condition.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsure mounting hole is clean and torque to vehicle spec\u003c\/li\u003e\n  \u003cli\u003eCheck connector pins and wiring continuity before replacement\u003c\/li\u003e\n  \u003cli\u003eUse correct socket depth to avoid damaging the sensor body\u003c\/li\u003e\n  \u003cli\u003eRe-scan ECM codes after installation to confirm resolution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The NTK ID0213 knock sensor is aimed at mechanics, DIY enthusiasts and fleet technicians who need an OEM-fit replacement for vehicles that report knock-related faults. It suits anyone seeking a durable, sealed sensor with factory-matching harness length and noise protection to restore accurate detonation detection and proper ignition timing response.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the NTK ID0213 fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: ID0213 is vehicle-specific—confirm compatibility with your vehicle year, make and model before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the sensor myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, with basic hand tools—clean mating surface, torque to spec, and verify connector and wiring continuity.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"NTK","offers":[{"title":"Default Title","offer_id":67586587295929,"sku":"B07F4LQFHB","price":120.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ntk-id0213-front-view-sensor.jpg?v=1790487744"},{"product_id":"qiybone-4-piece-o2-oxygen-sensor-kit-for-gm-3-6l-v6-2012-2020-upstream-downstream-oem-fit","title":"QIYBONE 4-Piece O2 Oxygen Sensor Kit for GM 3.6L V6 (2012–2020) – Upstream \u0026 Downstream, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eQIYBONE 4-piece oxygen sensor kit replaces upstream and downstream O2 sensors (234-4565, 234-4566 and related OE numbers) for 3.6L Chevy, GMC, Buick and Cadillac models from 2012–2020.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese four O2 sensors are precision-engineered to match OEM fit and function for a range of V6 3.6L engines, helping the engine control module monitor air\/fuel ratios and maintain efficient combustion. Constructed with stainless-steel housings and high-temperature materials, the sensors use proven sensing elements and sealed connectors for durability in exhaust-system conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engine years does this sensor kit support?\u003c\/h3\u003e\n\u003cp\u003eThis kit is compatible with many GM 3.6L V6 models across Chevrolet, GMC, Buick and Cadillac lines from 2012 through 2020. Confirm compatibility by matching your vehicle model, year and the original sensor location (upstream vs downstream) before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevy Impala 3.6L (2014–2020), Traverse 3.6L (2012–2017), Colorado 3.6L (2015–2016), Caprice 3.6L (2012–2017)\u003c\/li\u003e\n  \u003cli\u003eGMC Acadia 3.6L (2012–2016), Canyon 3.6L (2015–2016)\u003c\/li\u003e\n  \u003cli\u003eBuick Enclave 3.6L (2012–2017), Cadillac XTS 3.6L (2013–2019)\u003c\/li\u003e\n  \u003cli\u003eMatches OE\/reference numbers like 234-4565, 234-4566, 250-24773 and others listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these QIYBONE oxygen sensors affect fuel economy and engine performance?\u003c\/h3\u003e\n\u003cp\u003eO2 sensors measure exhaust oxygen levels and relay that data to the vehicle’s engine control unit so fuel delivery can be adjusted. Accurate, responsive sensors help the ECU keep the air\/fuel ratio near optimum, which can improve fuel economy and throttle response when sensors are working correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast response sensing helps reduce rich or lean running conditions\u003c\/li\u003e\n  \u003cli\u003eBetter air\/fuel control can lower fuel consumption over time\u003c\/li\u003e\n  \u003cli\u003eStable readings support smoother idling and consistent acceleration\u003c\/li\u003e\n  \u003cli\u003eDurable materials sustain performance in high-temperature exhaust environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and installation details?\u003c\/h3\u003e\n\u003cp\u003eQIYBONE sensors are manufactured with stainless-steel shells and high-temp resistant internals for corrosion and heat protection. They are designed to OEM dimensions and use standard connectors for a plug-and-play replacement in most cases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless-steel housing and double-sealing for long life\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature materials for sensing element longevity\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play electrical connector—compare your original plug to the product image\u003c\/li\u003e\n  \u003cli\u003eSold as a set of four to cover upstream and downstream positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich OE\/reference numbers does this kit replace and why match them?\u003c\/h3\u003e\n\u003cp\u003eThe kit lists multiple OE and reference numbers so you can cross-check against your vehicle’s original part number. Matching the reference number ensures correct thread, connector type and sensing characteristics for your exhaust layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon cross-references: 234-4565, 234-4566, 250-24773, 350-34003\u003c\/li\u003e\n  \u003cli\u003eAlso replaces numbers like 234-4259, 234-4818, 234-4840 and others shown\u003c\/li\u003e\n  \u003cli\u003eVerify with the original sensor on your vehicle before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This QIYBONE 4PCS oxygen sensor kit is for owners and mechanics who need a complete upstream and downstream sensor replacement for GM 3.6L vehicles built between 2012 and 2020. Choose this set if you want OEM-style fitment, stainless-steel construction and a full-vehicle replacement to restore accurate air\/fuel monitoring and avoid diagnostic trouble codes related to oxygen sensors.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2015 Chevy Impala 3.6L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this 4-piece kit lists compatibility with Chevy Impala 3.6L models from 2014–2020; match the original sensor connector to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors require programming or a special tool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is typically required; they are plug-and-play. Use basic hand tools and compare connectors before installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QIYBONE","offers":[{"title":"Default Title","offer_id":67586589229241,"sku":"B0GMVW4VDJ","price":146.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/qiybone-front-view-oxygen-sensor-kit.jpg?v=1790487766"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/delphi-ss11407-front-view.jpg?v=1790612458","url":"https:\/\/redleafauto.ca\/collections\/car-sensors.oembed?page=12","provider":"Redleaf Auto","version":"1.0","type":"link"}