{"title":"Control Arms \u0026 Ball Joints","description":"\u003cp\u003eUpper and lower control arms, many with ball joints and bushings pre-installed. Plan a wheel alignment after replacement.\u003c\/p\u003e\u003cp\u003e172 products from 54 brands, including KSP PERFORMANCE, MOOG, SCITOO and Aeagle. Most are priced between $73 and $520 CAD.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"tiezful-front-lower-control-arm-kit-for-nissan-altima-2013-2014-2pc-pre-assembled-ball-joints-direct-fit","title":"TIEZFUL Front Lower Control Arm Kit for Nissan Altima 2013-2014 — 2Pc Pre‑assembled Ball Joints, Direct-Fit","description":"\u003cstrong\u003eTIEZFUL 2Pc Control Arm Kit replaces both front lower control arms with ball joints for Nissan Altima 2013–2014, providing a direct-fit suspension repair.\u003c\/strong\u003e\n\n\u003cp\u003eIf your 2013 or 2014 Nissan Altima shows uneven tire wear, loose steering, or clunking from the front suspension, replacing worn lower control arms is a common and effective repair. This TIEZFUL two-piece kit includes driver and passenger front lower control arms with pre-assembled ball joints and is engineered to match factory mounting points for a straightforward swap.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this control arm kit match my Altima?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed specifically for Nissan Altima sedans from model years 2013 and 2014 and uses OE-style mounting geometry to align with your factory suspension. Each arm comes with the correct ball joint assemblies and corresponds to common interchange numbers used by mechanics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Nissan Altima Sedan 2013 and 2014 models\u003c\/li\u003e\n  \u003cli\u003eIncludes left and right front lower control arms with ball joints\u003c\/li\u003e\n  \u003cli\u003eInterchange references: 512-59507R, 512-59508L, 545009HP0A, 545019HP0A\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet original factory mounting dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction improve durability?\u003c\/h3\u003e\n\u003cp\u003eTIEZFUL builds these control arms from high-strength steel tubing with reinforced mounting plates, then applies a corrosion-resistant coating to extend service life. The combination reduces flex and stands up better to road stress compared with lightweight or poorly finished replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel tubing for structural rigidity\u003c\/li\u003e\n  \u003cli\u003eSolid plate mounting brackets for secure attachment points\u003c\/li\u003e\n  \u003cli\u003eRust-resistant finish to protect against corrosion\u003c\/li\u003e\n  \u003cli\u003ePre-assembled ball joints to save installation time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will installing this kit affect driving feel and safety?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn control arms restores proper wheel alignment and controls wheel movement, which reduces vibration and improves steering response. While not a replacement for alignment service, a sound control arm kit helps maintain stable handling and consistent tire contact with the road.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces road surface vibration felt through the steering\u003c\/li\u003e\n  \u003cli\u003eHelps maintain correct wheel geometry for predictable handling\u003c\/li\u003e\n  \u003cli\u003eStabilizes front suspension for improved ride comfort\u003c\/li\u003e\n  \u003cli\u003eSupports safer steering inputs under normal driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eThe control arms are built as direct-fit replacements to match factory attachment points, so installation is simpler than adapters or custom parts. Each kit contains one driver-side and one passenger-side lower control arm with the ball joint already fitted.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes two complete front lower control arms with ball joints\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design follows original factory standards for easier installation\u003c\/li\u003e\n  \u003cli\u003eCompatible with common shop procedures—bolts, bushings, and alignments as standard\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle year\/make\/model before purchase to confirm fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The TIEZFUL 2Pc Control Arm Kit is aimed at Nissan Altima 2013–2014 owners, DIY mechanics, and professional technicians replacing worn front suspension components. Choose this kit if you need a direct-fit, durable replacement for noisy, loose, or worn lower control arms and want restored steering feel and improved ride stability. Note: after installation, a professional wheel alignment is recommended to return geometry to factory specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2014 Nissan Altima sedan?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This two-piece kit is made to fit Nissan Altima sedans from 2013 and 2014; verify your exact model before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include ball joints and require alignment?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each arm comes with pre-assembled ball joints. A wheel alignment after installation is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TIEZFUL","offers":[{"title":"Default Title","offer_id":67584846528697,"sku":"B0D1VDW8KM","price":325.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tiezful-front-lower-control-arms-packaging.jpg?v=1790456297"},{"product_id":"ksp-performance-forged-upper-control-arm-for-f-150-2004-2020-2-4in-lift-cnc-aluminum-with-oem-style-rubber-bushings","title":"KSP PERFORMANCE Forged Upper Control Arm for F-150 2004–2020 2–4in lift, CNC aluminum with OEM-style rubber bushings","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE forged one-piece aluminum upper control arm with OEM-style rubber bushings for Ford F-150 (2004–2020) provides a durable, bolt-on replacement designed to work with 2–4\" leveling kits.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your truck has wheel rub, incorrect camber, or you’re fitting a leveling\/lift kit, the upper control arm (UCA) plays a key role in restoring suspension geometry and ride quality. This KSP PERFORMANCE UCA is CNC-machined from a single forged aluminum forging, finished with a protective dust tower, and fitted with OE-style rubber bushings to absorb road vibrations. It serves as a long-lasting aftermarket alternative to welded steel arms while remaining compatible with common replacement parts and service procedures.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this UCA improve alignment and reduce tire rub?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn or undersized factory UCAs with a properly sized forged arm repositions the upper mounting point and restores correct camber and caster ranges. That helps eliminate tire contact at the wheel well when you’ve added a 2–4\" leveling kit, and it creates a more predictable steering feel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecise CNC machining ensures accurate geometry for restored wheel alignment.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common replacement components (MOOG K201804, DORMAN BCK74479PR, OE numbers listed).\u003c\/li\u003e\n  \u003cli\u003eOEM-style rubber bushings absorb vibration, reducing noise and harshness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the KSP PERFORMANCE design more durable than stock arms?\u003c\/h3\u003e\n\u003cp\u003eThis UCA is made from a single forged aluminum blank rather than welded steel sections, which eliminates corrosion-prone seams and improves fatigue life. The ball joint receives a protective cover and a taller \"tower\" dust shield that keeps grit and moisture away from moving parts, extending service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece forged aluminum resists rust and fatigue compared to welded arms.\u003c\/li\u003e\n  \u003cli\u003ePre-installed, extended dust boot and tower-shaped cover reduce contaminant ingress.\u003c\/li\u003e\n  \u003cli\u003eBall joint protective cover and CNC tolerance control improve longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what should I expect during fitment?\u003c\/h3\u003e\n\u003cp\u003eThe KSP upper control arm is engineered as a 100% bolt-on replacement and is intended to be installed with basic tools in a typical home garage. Most independent installers or experienced DIYers can complete both sides in about 4–5 hours, including torqueing to factory specifications and performing a post-install alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-on fit for Ford F-150 models 2004–2020 with appropriate orientation for leveling kits.\u003c\/li\u003e\n  \u003cli\u003eEstimated install time: 4–5 hours for one person with standard tools.\u003c\/li\u003e\n  \u003cli\u003eFollow up with a full wheel alignment after installation for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I be able to service or replace bushings and ball joints later?\u003c\/h3\u003e\n\u003cp\u003eYes—the arm uses OE-style rubber bushings and common ball joint fittings so replacement components are widely available. That makes routine servicing convenient and keeps long-term ownership costs lower than some proprietary designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses OE-compatible rubber bushings for easy parts sourcing.\u003c\/li\u003e\n  \u003cli\u003eReplacement part references included to match MOOG and Dorman equivalents.\u003c\/li\u003e\n  \u003cli\u003eAfter-sales support offers accessory replacement within one year for qualifying quality issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This KSP PERFORMANCE forged UCA is aimed at F-150 owners (2004–2020) who are installing 2–4\" leveling kits, replacing worn suspension arms, or seeking a rust-resistant upgrade over OEM welded steel parts. It’s appropriate for DIY mechanics, off-road enthusiasts, and professional shops that want a durable, serviceable arm that accepts common replacement bushings and ball joints.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this UCA fit my Ford F-150 with a 3\" leveling kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The KSP UCA is designed to work with 2–4\" leveling kits on Ford F-150s from 2004–2020, restoring proper suspension geometry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are replacement bushings and ball joints available?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It uses OE-style rubber bushings and common ball joint fittings; compatible references include MOOG K201804 and DORMAN BCK74479PR.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584859013305,"sku":"B0F9F2FZ3S","price":749.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-uca-front-view.jpg?v=1790456706"},{"product_id":"ksp-performance-front-upper-control-arm-for-toyota-tacoma-2004-2023-2-4-lift-forged-t6-aluminum-greasable-ball-joint","title":"KSP PERFORMANCE Front Upper Control Arm for Toyota Tacoma 2004–2023 2–4\" Lift — Forged T6 Aluminum, Greasable Ball Joint","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE front upper control arm is a one-piece forged aluminum adjustable UCA engineered to replace worn factory arms and correct suspension geometry on 2–4\" lifted Toyota Tacoma, Hilux, and Fortuner models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis upgrade combines corrosion-resistant T6 forged aluminum, a greasable and zinc-nickel coated ball joint, and premium polyurethane bushings to deliver longer life, improved handling, and easier serviceability than stock arms. The arm is designed for lifted applications and provides greater articulation and correct ball-joint angle for common 2–4\" lifts. It fits a wide range of Toyota trucks and SUVs across multiple model years while avoiding welded weak points that invite fatigue and rust.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this control arm improve suspension performance after a 2–4\" lift?\u003c\/h3\u003e\n\u003cp\u003eThe KSP UCA restores proper ball-joint geometry and increases articulation compared with the original factory arm, reducing binding and uneven tire wear caused by altered angles. The stronger forged aluminum construction resists bending under load, and the polyurethane bushings give firmer feedback with less deflection than rubber.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrects ball-joint angle for lifted front-end geometry\u003c\/li\u003e\n  \u003cli\u003eForged T6 aluminum resists bending and fatigue better than stamped steel\u003c\/li\u003e\n  \u003cli\u003ePolyurethane bushings improve steering response and reduce noise\u003c\/li\u003e\n  \u003cli\u003eIncreased range of motion for off-road articulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the ball joint and serviceability different from OEM options?\u003c\/h3\u003e\n\u003cp\u003eKSP supplies a greasable metal-to-metal ball joint with zinc-nickel coating for corrosion resistance and a dust cover plus a protective tower boot to keep contaminants out. The greasable socket lets you flush out debris and replenish lubricant, extending service intervals compared with sealed or cheaper polymer joints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGreasable joint for routine maintenance and longer life\u003c\/li\u003e\n  \u003cli\u003eZinc-nickel coated pin for improved rust resistance\u003c\/li\u003e\n  \u003cli\u003eProtective dust boot and KSP cover to keep contaminants away\u003c\/li\u003e\n  \u003cli\u003eMetal-to-metal design offers durable wear characteristics over POM joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these arms stand up to harsh conditions like salt, mud, and snow?\u003c\/h3\u003e\n\u003cp\u003eThe one-piece forged aluminum body is highly resistant to corrosion compared with welded or stamped steel arms, and the T6 alloy resists surface degradation from road salt and melting snow. Components that are exposed, such as the ball-joint pin, receive a zinc-nickel finish, and the bushings are polyurethane, which tolerates extreme temperatures better than rubber.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece forged design eliminates weld corrosion points\u003c\/li\u003e\n  \u003cli\u003eT6 aluminum won’t rust after exposure to salt or moisture\u003c\/li\u003e\n  \u003cli\u003eCoated ball-joint hardware minimizes corrosion-prone surfaces\u003c\/li\u003e\n  \u003cli\u003ePolyurethane bushings perform in a wider temperature range than rubber\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Toyota models and years will this control arm fit?\u003c\/h3\u003e\n\u003cp\u003eThis KSP front upper control arm is built to fit multiple Toyota platforms; always verify fitment against your vehicle’s exact model and drivetrain before purchase. Note that some model-year and 2WD variations require checking compatibility—PreRunner and 4x4 models are commonly supported across specific years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Toyota Tacoma: 2005–2015 (2nd gen), 2005–2023 PreRunner, 2015–2023 (3rd gen)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with most 2004–2015 Tacoma 2WD (except PreRunner)\u003c\/li\u003e\n  \u003cli\u003eFits Toyota Hilux: 2004–2015 (7th gen AN10\/20\/30) and 2015–2023 (8th gen AN120\/130)\u003c\/li\u003e\n  \u003cli\u003eFits Toyota Fortuner: 2004–2023\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This KSP PERFORMANCE upper control arm is aimed at Toyota owners who lifted their trucks 2–4\" and want a durable, serviceable upgrade to restore suspension geometry and improve handling. It suits off-road enthusiasts and daily drivers seeking a corrosion-resistant, maintenance-friendly solution with stronger materials than OE arms. Installers and DIYers who value clean fitment, greasable joints, and longer-lasting bushings will find this UCA a practical, cost-effective replacement for worn or inadequate stock components.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this arm with a 3\" lift on my 2016 Tacoma?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this KSP arm suits most 2–4\" lifts including a 3\" lift on 2016 Tacoma models when fitment matches PreRunner\/4x4 requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the ball joint require periodic greasing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the ball joint is greasable—regular lubrication extends life and reduces wear in harsh conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584859078841,"sku":"B0D4D93GKQ","price":676.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-front-upper-control-arm-front-view.jpg?v=1790456704"},{"product_id":"ksp-performance-adjustable-forged-upper-control-arms-for-ram-1500-2009-2022-2-4-lift-t6-aluminum-greasable-ball-joints","title":"KSP PERFORMANCE Adjustable Forged Upper Control Arms for Ram 1500 2009-2022 — 2–4\" Lift, T6 Aluminum \u0026 Greasable Ball Joints","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE forged one-piece aluminum adjustable upper control arms replace OEM arms for 2–4\" lifted Dodge\/Ram 1500 trucks, offering corrosion resistance, serviceable greasable ball joints, and stronger-than-stock geometry.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese upper control arms are engineered for Ram 1500 owners who have added 2 to 4 inches of lift using spacers or extended struts\/shocks. Constructed from T6 forged aluminum with precision CNC machining and magnetic particle inspection, each arm is built without welds to reduce weak points and prevent rust. Serviceable greasable ball joints, zinc-nickel coated pins, and polyurethane bushings give better durability and improved handling over worn stock components or inexpensive replacements.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms improve a lifted Ram 1500's front-end geometry?\u003c\/h3\u003e\n\u003cp\u003eAdjustable arms restore proper ball joint angle and caster after a 2–4\" lift, helping steering return and reducing premature tire wear. The increased ball joint articulation accommodates lift travel so the suspension operates within designed ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable length to correct caster and camber for lifted setups\u003c\/li\u003e\n  \u003cli\u003eGreater range of motion than OEM ball joints for lift applications\u003c\/li\u003e\n  \u003cli\u003eOne-piece forged design maintains alignment under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and features prevent corrosion and wear?\u003c\/h3\u003e\n\u003cp\u003eArms are forged from T6 aluminum and CNC-machined to eliminate weld seams, minimizing corrosion points. Ball joint pins receive a zinc-nickel coating, and dust boots plus KSP protective covers keep contaminants away for longer service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 forged aluminum resists rust and is lighter than steel\u003c\/li\u003e\n  \u003cli\u003eZinc-nickel coated, heat-treated ball joint pins for extended life\u003c\/li\u003e\n  \u003cli\u003eGreasable sockets and tower-style dust boots for easy maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these control arms serviceable and easier to maintain?\u003c\/h3\u003e\n\u003cp\u003eYes — greasable ball joints allow you to flush contaminants and replenish lubricant, reducing corrosion and wear. Polyurethane bushings with lubrication grooves preserve responsiveness while resisting temperature-related deterioration better than rubber.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGreasable fittings let you inject fresh lubricant on schedule\u003c\/li\u003e\n  \u003cli\u003ePolyurethane bushings improve steering feedback and noise control\u003c\/li\u003e\n  \u003cli\u003eKSP protective covers reduce debris contact with the joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Ram 1500 model years and lift types are compatible?\u003c\/h3\u003e\n\u003cp\u003eThese arms are made for 2009–2010 Dodge Ram 1500 and 2011–2022 Ram 1500 trucks equipped with 2–4\" lifts that use lift spacers or extended struts\/shocks. They are not compatible with kits that raise the steering knuckles and rely on OEM upper arms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Dodge Ram 1500 (2009–2010) and Ram 1500 (2011–2022)\u003c\/li\u003e\n  \u003cli\u003eCompatible with lift systems using spacers or extended struts\/shocks\u003c\/li\u003e\n  \u003cli\u003eNot compatible with full 4\" lift kits that require raised knuckles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These KSP PERFORMANCE upper control arms suit Ram 1500 owners who need a durable, serviceable upgrade for 2–4\" lifted trucks. Choose them if you want rust-resistant forged aluminum construction, adjustable geometry to correct lift-induced alignment issues, and greasable, zinc-nickel coated ball joints with polyurethane bushings for longer life and improved steering response. If your setup uses raised knuckles or a full 4\" lift that depends on OEM-style arms, select a product designed for that specific kit instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these work with a full 4\" lift kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These arms are NOT compatible with full 4\" lift kits that use raised steering knuckles designed for OEM upper arms.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Ram 1500 years are supported?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with 2009–2010 Dodge Ram 1500 and 2011–2022 Ram 1500 when using lift spacers or extended struts\/shocks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584859177145,"sku":"B0CJB7TL7K","price":718.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-upper-control-arm-front-packaging.jpg?v=1790456707"},{"product_id":"ksp-performance-aluminum-upper-control-arm-for-f-150-2004-2020-adjustable-forged-t6-for-2-4-lift-corrosion-resistant","title":"KSP PERFORMANCE Aluminum Upper Control Arm for F-150 2004-2020 — Adjustable Forged T6 for 2-4\" Lift, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE aluminum upper control arm is a one-piece forged, adjustable replacement for lifted Ford F-150s (2–4\"), built to resist corrosion and restore proper suspension geometry.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from upgraded T6 forged aluminum and CNC-machined to precise tolerances, this adjustable upper control arm replaces worn or stock units on many Ford trucks and SUVs. It addresses the altered ball-joint angles common after a 2–4\" leveling or lift, improves articulation off-road, and reduces the long-term corrosion and fatigue issues associated with stamped or welded steel arms.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this control arm fix lift-related suspension geometry?\u003c\/h3\u003e\n\n\u003cp\u003eThe adjustable length and greater ball-joint range let you recenter the upper ball joint after a 2–4\" lift, restoring caster and camber to safe, predictable values. That helps reduce premature tire wear and steering pull that happen when the factory arm struggles with altered angles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable threaded design for fine tuning caster and camber.\u003c\/li\u003e\n  \u003cli\u003eExtended ball-joint articulation accommodates lifted ride heights.\u003c\/li\u003e\n  \u003cli\u003eImproves alignment window for both street and trail driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction make it durable against rust and wear?\u003c\/h3\u003e\n\n\u003cp\u003eThis is a one-piece forged T6 aluminum arm, CNC-machined with no welded seams, eliminating common stress risers and corrosion points. Components such as the heat-treated ball joint pin receive a zinc-nickel coating and the polyurethane bushings tolerate temperature extremes better than rubber.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged T6 aluminum body resists rust and reduces weight.\u003c\/li\u003e\n  \u003cli\u003eZinc-nickel coated ball joint pins for extended service life.\u003c\/li\u003e\n  \u003cli\u003ePolyurethane bushings with lubrication grooves for longer performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is service and maintenance on the KSP arm?\u003c\/h3\u003e\n\n\u003cp\u003eServiceability is built in: greasable sockets let you flush contaminants and refresh lubricant, and the ball joint features tower-shaped dust boots plus KSP protective covers to keep debris out. Magnetic particle inspection during manufacturing also helps ensure each arm meets strength expectations before it ships.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGreasable sockets for routine lubrication and contamination flushing.\u003c\/li\u003e\n  \u003cli\u003eProtective dust boots and KSP covers extend joint life.\u003c\/li\u003e\n  \u003cli\u003eMagnetic particle inspection performed on every arm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my truck and are there clearance considerations?\u003c\/h3\u003e\n\n\u003cp\u003eThese upper control arms are compatible with Ford F-150 model years 2004–2020 (not for Raptor), plus Ford Expedition and Lincoln Navigator 2006–2022. Note that conservative factory wheels (ET44) may cause tire-to-arm rubbing; at least 1.5\" wheel spacers or 0 offset aftermarket wheels are recommended for clearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: F-150 (2004–2020) excluding Raptor; Expedition \u0026amp; Navigator (2006–2022).\u003c\/li\u003e\n  \u003cli\u003eDesigned for 2–4\" leveling\/lift applications to correct joint angles.\u003c\/li\u003e\n  \u003cli\u003eWheel offset or spacer may be required to avoid tire contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This KSP PERFORMANCE aluminum upper control arm is aimed at truck owners who have installed a 2–4\" leveling kit or lift, drivers who want a corrosion-resistant upgrade over factory stamped-steel arms, and off-road enthusiasts seeking improved articulation and serviceable hardware. If you need to correct suspension geometry after a lift, extend ball-joint travel, and reduce long-term rust and fatigue risk, this arm provides an adjustable, durable solution designed for both daily-driven F-150s and light off-road use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these work on a Raptor model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These KSP upper control arms do not fit Ford Raptor models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need spacers with stock wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Possibly. Conservative ET44 wheels may rub; at least 1.5\" spacers or 0 offset wheels are recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584859111609,"sku":"B0CJB5L1X7","price":749.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-f150-front-view.jpg?v=1790456708"},{"product_id":"ksp-performance-adjustable-upper-control-arms-for-2-4-lift-tacoma-hilux-forged-aluminum-3-ball-joints","title":"KSP PERFORMANCE Adjustable Upper Control Arms for 2-4\" Lift Tacoma\/Hilux – Forged Aluminum, 3 Ball Joints","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE aluminum adjustable upper control arms are a one-piece forged upgrade for 2–4\" lifted Toyota Tacoma, Hilux, Prerunner and Fortuner models, featuring three ball joints and OEM-style rubber bushings for improved alignment and durability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese upper control arms replace factory units to restore correct camber and caster after a lift, reduce tire rub, and provide a longer service life than typical welded steel arms. Machined from forged aluminum and equipped with protective dust covers and pre-installed rubber bushings, the KSP UCA kit is designed for street and mild off-road use while remaining bolt-on for straightforward installation at home or in a shop.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these arms improve handling after lifting a truck?\u003c\/h3\u003e\n\u003cp\u003eThe adjustable design lets you correct wheel alignment changes caused by 2–4\" lifts, restoring proper camber and improving tire contact patch. That translates to more predictable steering, reduced uneven tire wear, and better overall vehicle control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustability to dial in camber and caster after lift kits.\u003c\/li\u003e\n  \u003cli\u003eThree ball joints offer increased articulation for lifted suspensions.\u003c\/li\u003e\n  \u003cli\u003eForged one-piece aluminum resists bending and corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes KSP PERFORMANCE’s construction different from OEM or welded arms?\u003c\/h3\u003e\n\u003cp\u003eThese arms are forged as a single piece of aluminum, eliminating weld seams that can corrode or fail under stress. CNC machining guarantees precise fitment while the tower-shaped dust covers and pre-installed boots protect critical ball joint components from dirt and moisture.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece forged aluminum resists rust and metal fatigue longer than welded steel.\u003c\/li\u003e\n  \u003cli\u003eCNC-machined surfaces for consistent tolerances and bolt-on alignment.\u003c\/li\u003e\n  \u003cli\u003eAdvanced dust-boot shape prevents contaminants from damaging sockets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the bushings and ball joints serviceable or replaceable?\u003c\/h3\u003e\n\u003cp\u003eThe KSP UCA uses OEM-style rubber bushings that are readily available, and each arm includes three ball joints with protective covers. If a component becomes worn, commonly available replacement bushings and ball joints fit the arm, simplifying maintenance and reducing long-term cost.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM equivalent bushing numbers listed for easy sourcing.\u003c\/li\u003e\n  \u003cli\u003ePre-installed rubber bushings reduce vibration and noise.\u003c\/li\u003e\n  \u003cli\u003eProtective ball-joint covers extend service intervals by keeping out debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what support does KSP offer?\u003c\/h3\u003e\n\u003cp\u003eInstallation is 100% bolt-on and typically takes 4–5 hours; one competent technician can complete the job at home or in a garage. KSP PERFORMANCE provides 24-hour online customer service and one-year accessory replacement for quality-related issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% bolt-on design for straightforward fitment on compatible models.\u003c\/li\u003e\n  \u003cli\u003eEstimated 4–5 hour install time for DIY or professional mechanics.\u003c\/li\u003e\n  \u003cli\u003eAfter-sales service with accessory replacement coverage within one year.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who have installed 2–4\" suspension lifts on Toyota Tacoma, Hilux, Prerunner or Fortuner models (2004–2023) and need a durable, adjustable upper control arm to correct alignment, reduce tire rub, and upgrade durability. It's well suited for enthusiasts who prefer aftermarket parts that are serviceable, corrosion-resistant, and designed to work with lift-related suspension geometry changes while remaining street-friendly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these URAs fit my 2006 Tacoma with a 3\" lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they fit Tacoma models 2004–2023 and are adjustable for 2–4\" lifts, including a 3\" setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace the rubber bushings myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the arms use OEM-style bushings that are widely available and serviceable with common tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584859144377,"sku":"B0F9DYP9GM","price":686.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-front-view-upper-control-arms.jpg?v=1790456710"},{"product_id":"irontree-front-lower-control-arms-with-pre-installed-ball-joints-pair-k622215-k622216-for-2011-2019-ford-explorer-corrosion-r","title":"IRONTREE Front Lower Control Arms with Pre-Installed Ball Joints — Pair (K622215 K622216) for 2011-2019 Ford Explorer, Corrosion-R","description":"\u003cp\u003e\u003cstrong\u003eIRONTREE front lower control arms with pre-installed ball joints replace both left and right units for 2011–2019 Ford Explorer and compatible Police Interceptor Utility models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two pre-assembled lower control arms (K622215 driver side and K622216 passenger side) arrive ready to install and are engineered to match original equipment geometry. They include greased ball joints and a corrosion-resistant finish, designed to provide a direct-fit alternative to worn or damaged factory components. The set is sold as a pair to ensure symmetrical steering and suspension behaviour after replacement.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included and why come as a pair?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one left (K622215) and one right (K622216) front lower control arm, each with an integrated ball joint already installed. Replacing both sides at once helps maintain balanced handling and even wear, avoiding uneven suspension response.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDriver-side control arm K622215 with ball joint\u003c\/li\u003e\n  \u003cli\u003ePassenger-side control arm K622216 with ball joint\u003c\/li\u003e\n  \u003cli\u003ePre-assembled to reduce installation time\u003c\/li\u003e\n  \u003cli\u003eSold together for matching fit and performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these IRONTREE control arms compare to OEM parts?\u003c\/h3\u003e\n\u003cp\u003eManufactured to meet OE fit and function standards, these arms are intended as a direct replacement while offering corrosion resistance and factory-style geometry. They undergo functional testing to ensure they perform like original equipment without requiring modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to the same mounting points and alignment specs as OEM\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant coating for longer life in road conditions\u003c\/li\u003e\n  \u003cli\u003eGreased ball joints to simplify initial maintenance\u003c\/li\u003e\n  \u003cli\u003eLightweight construction while maintaining structural strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installation need any extra parts or modifications?\u003c\/h3\u003e\n\u003cp\u003eThese control arms are designed for bolt-on installation using existing factory fasteners in most cases, because they replicate the original mounting geometry. You should still inspect related suspension components and replace worn bolts or bushings as needed to secure proper alignment and safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo cutting or welding required—direct replacement\u003c\/li\u003e\n  \u003cli\u003eKeep factory mounting bolts or replace with new grade-matched hardware\u003c\/li\u003e\n  \u003cli\u003eInspect tie rods, sway links, and bushings during installation\u003c\/li\u003e\n  \u003cli\u003eAn alignment is recommended after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicle models and years are supported?\u003c\/h3\u003e\n\u003cp\u003eThis pair fits a range of Ford vehicles when matched to the listed part numbers: primarily the Ford Explorer (2011–2019) and Police Interceptor Utility (2013–2019). Confirm compatibility with your VIN or consult fitment guides before ordering to ensure proper selection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFORD EXPLORER: 2011–2019\u003c\/li\u003e\n  \u003cli\u003ePOLICE INTERCEPTOR UTILITY: 2013–2019\u003c\/li\u003e\n  \u003cli\u003ePOLICE INTERCEPTOR SEDAN: select 2014 models\u003c\/li\u003e\n  \u003cli\u003eMatch to part numbers K622215 \/ K622216 for correct fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Technicians, DIY mechanics, fleet managers, and drivers who need a cost-effective, ready-to-install replacement for worn front lower control arms on supported Ford models. If you want a factory-form alternative with pre-greased ball joints and corrosion protection—sold as a matched left\/right pair—this IRONTREE set is intended to restore consistent steering geometry and suspension function. Always verify vehicle fitment and perform a professional wheel alignment after installation to ensure safe handling.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these arms come pre-assembled with ball joints?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — both K622215 and K622216 arrive with ball joints pre-installed and greased for immediate installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is wheel alignment required after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, a professional alignment is recommended after replacing control arms to ensure proper steering and tire wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IRONTREE","offers":[{"title":"Default Title","offer_id":67584882933945,"sku":"B0FCRPDHN7","price":292.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/irontree-front-view-packaging.jpg?v=1790457578"},{"product_id":"moog-front-right-upper-suspension-control-arm-with-pre-installed-ball-joint-silverado-1500-fit-corrosion-resistant","title":"MOOG Front Right Upper Suspension Control Arm with Pre-Installed Ball Joint — Silverado 1500 Fit, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eMOOG RK80670 is a complete front right upper suspension control arm with an integrated ball joint engineered to restore factory steering geometry and improve ride stability on compatible GM trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Silverado, Avalanche, Suburban or Escalade is showing signs of loose steering, uneven tire wear, or clunking from the front end, replacing the worn upper control arm with a direct-fit MOOG assembly can address the weak link. This OE-style unit arrives with the ball joint pre-installed and is made to endure road stresses while resisting corrosion, helping return handling precision and confidence behind the wheel.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this control arm help my truck’s handling?\u003c\/h3\u003e\n\u003cp\u003eThe MOOG upper control arm locates the wheel hub and maintains proper suspension geometry under load, which is key to predictable steering and consistent tire contact. With a robust design and corrosion-resistant finish, it keeps alignment angles stable and reduces wandering or pull.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces worn arm to correct camber and caster drift\u003c\/li\u003e\n  \u003cli\u003ePre-installed ball joint ensures proper pivoting action\u003c\/li\u003e\n  \u003cli\u003eBuilt to resist road salt and environmental corrosion\u003c\/li\u003e\n  \u003cli\u003eSupports repeatable alignment for longer tire life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my vehicle model years?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is manufactured to fit a range of GM full-size trucks and SUVs; confirm fitment using your VIN or vehicle year\/model before purchase. It’s a direct replacement for specific 2007–2016 Chevrolet and 2007–2014 Cadillac applications listed by MOOG.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Chevrolet Silverado 1500 (2007–2016 variations as listed)\u003c\/li\u003e\n  \u003cli\u003eFits Chevy Avalanche and Suburban 1500 for listed years\u003c\/li\u003e\n  \u003cli\u003eAlso fits Cadillac Escalade, Escalade ESV, and EXT within specified years\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design for bolt-on installation, where applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes MOOG’s construction durable for everyday driving?\u003c\/h3\u003e\n\u003cp\u003eMOOG engineers control arms for strength under repetitive loading and harsh conditions. Material selection, reinforced welds and protective coatings combine to provide structural integrity and longer component life compared with some economy replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-gauge materials and robust ball joint design for load resistance\u003c\/li\u003e\n  \u003cli\u003eProtective finish to slow corrosion from road salt and moisture\u003c\/li\u003e\n  \u003cli\u003ePrecision-manufactured mounting points for accurate alignment retention\u003c\/li\u003e\n  \u003cli\u003eTested to withstand routine driving stresses and rough roads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation for a DIYer or technician?\u003c\/h3\u003e\n\u003cp\u003eBecause the ball joint arrives preassembled in the arm, installation time is reduced and alignment-critical tolerances are preserved. Still, replace control arms in pairs when needed and have a post-install wheel alignment performed to ensure correct geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-installed ball joint reduces assembly steps\u003c\/li\u003e\n  \u003cli\u003eDirect-fit bolt locations match factory mounting points\u003c\/li\u003e\n  \u003cli\u003eRecommend professional alignment after replacement\u003c\/li\u003e\n  \u003cli\u003eBasic shop tools required; torque specs per factory manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The MOOG RK80670 is aimed at owners and technicians of compatible Chevrolet and Cadillac trucks\/SUVs who need a reliable, OE-style front right upper control arm and ball joint replacement. It’s a good choice if you want a durable, ready-to-install assembly that helps restore steering control and prolong tire life without fabricating or modifying mounting points.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this control arm include the ball joint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The MOOG RK80670 comes with the ball joint preinstalled for a quicker, correct fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I get an alignment after installing this part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A wheel alignment is recommended after replacement to ensure proper steering and tire wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOOG","offers":[{"title":"Default Title","offer_id":67584889323705,"sku":"B007ZLNUEK","price":194.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/moog-rk80670-front-right-upper-control-arm-packaging.jpg?v=1790457765"},{"product_id":"ilonpa-13-piece-front-suspension-steering-kit-for-1999-2006-gm-1500-trucks-upper-control-arms-ball-joints-tie-rods","title":"ILONPA 13-Piece Front Suspension \u0026 Steering Kit for 1999–2006 GM 1500 Trucks — Upper Control Arms, Ball Joints, Tie Rods","description":"\u003cp\u003e\u003cstrong\u003eComplete 13-piece front suspension and steering kit from ILONPA replaces worn control arms, ball joints, tie rod ends and related hardware for compatible 1999–2006 GM 1500 trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ILONPA front suspension kit groups all primary steering and upper-control components into one matched package so you can restore front-end geometry and steering feel without hunting individual parts. Components are engineered to fit specific model years of Chevrolet, GMC and Cadillac 1500-series vehicles, and the kit includes grease and hardware to simplify installation. Designed for mechanics and experienced DIYers, the set aims to remove play, reduce uneven tire wear and return more precise steering response when installed and aligned correctly.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does this 13-piece kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is built for first- and early-second generation GMT800 and related platforms with 1500-series front suspension. It covers many Chevrolet, GMC and Cadillac trucks and SUVs across model years listed below.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2002–2006 Cadillac Escalade, Escalade ESV, Escalade EXT\u003c\/li\u003e\n  \u003cli\u003e2002–2006 Chevrolet Avalanche 1500\u003c\/li\u003e\n  \u003cli\u003e1999–2006 Chevrolet Silverado 1500\u003c\/li\u003e\n  \u003cli\u003e2000–2006 Chevrolet Suburban 1500, Tahoe\u003c\/li\u003e\n  \u003cli\u003e1999–2006 GMC Sierra 1500\u003c\/li\u003e\n  \u003cli\u003e2000–2006 GMC Yukon, Yukon XL 1500\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThe ILONPA package contains all the major front steering and upper-suspension wear items so a technician can service the entire front end at once. Matching components help ensure consistent fitment and reduce the risk of mixing old and new parts that could compromise performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 front upper control arms with integrated ball joints\u003c\/li\u003e\n  \u003cli\u003e2 lower ball joints and 2 sway bar links\u003c\/li\u003e\n  \u003cli\u003e4 tie rod ends, 1 pitman arm (4-groove), idler arm bracket assembly and grease\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and precise are the replacement parts?\u003c\/h3\u003e\n\u003cp\u003eILONPA manufactures these components from high-strength steel tubing and solid plate mounting brackets for enhanced structural integrity. Precision tolerances are used to provide straightforward installation and correct steering alignment when adjusted at final assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength tubing resists bending under load\u003c\/li\u003e\n  \u003cli\u003eSolid bracket design for secure mounting points\u003c\/li\u003e\n  \u003cli\u003ePre-set tolerances reduce fitment adjustments during install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know before buying or installing this kit?\u003c\/h3\u003e\n\u003cp\u003eConfirm vehicle compatibility in your fitment tool before purchasing to avoid returns. Installation is intended for skilled DIYers or professional shops; after installation, a full front-end alignment is essential to achieve correct tire wear and steering geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck year, make and model compatibility using the fitment filter\u003c\/li\u003e\n  \u003cli\u003eGrease provided for initial lubrication—inspect and torque to spec\u003c\/li\u003e\n  \u003cli\u003eProfessional alignment recommended after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ILONPA 13-piece front suspension kit is aimed at professional mechanics, restoration shops and experienced owners who want a complete front-end refresh for late‑1990s to mid‑2000s Chevrolet, GMC and Cadillac 1500 trucks and SUVs. If you’re replacing multiple worn steering and suspension parts, this kit saves ordering time and ensures matched components, but plan for alignment and basic mechanical tools\/administered torque during installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both upper and lower ball joints?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set contains 2 upper control arms with ball joints plus 2 separate lower ball joints.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need an alignment after installing this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You should get a full front-end alignment after installation to ensure correct tire wear and steering geometry.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ILONPA","offers":[{"title":"Default Title","offer_id":67584899055801,"sku":"B0BFF4QBPL","price":386.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ilonpa-front-suspension-kit-packed.jpg?v=1790458242"},{"product_id":"kdsa-front-lower-control-arm-kit-for-toyota-rav4-2006-2018-8pc-complete-front-suspension-with-tie-rods-sway-links","title":"KDSA Front Lower Control Arm Kit for Toyota RAV4 2006-2018 — 8PC Complete Front Suspension with Tie Rods \u0026 Sway Links","description":"\u003cp\u003e\u003cstrong\u003eKDSA 8PC Front Lower Control Arm Kit is a complete front suspension and steering aftermarket set engineered to replace worn control arms, tie rods, and sway bar links on Toyota RAV4 models from 2006–2018.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one front suspension kit gathers the components drivers most commonly replace together: left and right lower control arms with ball joints, inner and outer tie rod ends, and sway bar end links. The parts are matched by design to restore proper steering geometry and suspension function after wear, helping simplify repairs by providing the essential front-end components in a single purchase. The kit includes both greasable and sealed fittings where appropriate and is packaged with part numbers for easy identification.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included in the 8-piece front suspension kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains two lower control arm and ball joint assemblies, two outer tie rod ends, two inner tie rod ends, and two sway bar end links. Each part matches KDSA part numbers listed for straightforward replacement and fit verification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront Left Lower Control Arm \u0026amp; Ball Joint – K620586\u003c\/li\u003e\n  \u003cli\u003eFront Right Lower Control Arm \u0026amp; Ball Joint – K620587\u003c\/li\u003e\n  \u003cli\u003eFront Left Outer Tie Rod End – ES800054\u003c\/li\u003e\n  \u003cli\u003eFront Right Outer Tie Rod End – ES800053\u003c\/li\u003e\n  \u003cli\u003eFront Inner Tie Rod Ends (pair) – EV800328\u003c\/li\u003e\n  \u003cli\u003eFront Sway Bar End Links (pair) – K750043\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit simplify a front-end repair on a RAV4?\u003c\/h3\u003e\n\u003cp\u003eInstead of sourcing each component individually, this kit provides the common service items together, reducing downtime and parts mismatch. Matching parts help ensure consistent wear characteristics and make it easier to complete a full front-end service in one job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle SKU solution reduces ordering errors\u003c\/li\u003e\n  \u003cli\u003eAll components chosen for compatible fit and steering alignment\u003c\/li\u003e\n  \u003cli\u003eClear labeling of parts and numbers for faster installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these parts fit my Toyota RAV4 model year and how do I check compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe set is designed for Toyota RAV4 models from 2006 through 2018 across most trims; however, verifying fitment against your vehicle's VIN or factory compatibility chart is recommended. The listing includes KDSA part numbers so you can cross-reference them with your vehicle’s original equipment to confirm fit before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntended fitment: Toyota RAV4 2006–2018 (all models—verify VIN)\u003c\/li\u003e\n  \u003cli\u003eUse part numbers supplied to cross-check OEM references\u003c\/li\u003e\n  \u003cli\u003eConsult the vehicle’s compatibility chart if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eParts are manufactured to precise tolerances for straightforward installation and alignment. Some components are greasable while others are sealed; follow standard torque specifications and alignment procedures after replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy-to-install design with OE-style mounting points\u003c\/li\u003e\n  \u003cli\u003eGreasable fittings on selectable parts for extended service life\u003c\/li\u003e\n  \u003cli\u003ePerform steering alignment after installation for correct handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: technicians, DIY mechanics, and fleet managers who want a reliable, matched set of front suspension components to restore handling and steering on Toyota RAV4 vehicles from 2006–2018. It’s suited for anyone replacing multiple front-end parts at once to save time and ensure component compatibility. KDSA backs the kit with a one-year warranty and a 30-day return policy with proof of purchase for added peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit all Toyota RAV4 trims from 2006–2018?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits most 2006–2018 RAV4 models, but verify compatibility using your VIN or the provided KDSA part numbers before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are any components greasable for maintenance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Some parts include greasable fittings while others are sealed; follow service guidance for lubrication points.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KDSA","offers":[{"title":"Default Title","offer_id":67584902070457,"sku":"B0DD7MY5QQ","price":375.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kdsa-front-control-arm-kit-packaging.jpg?v=1790458350"},{"product_id":"maxpeedingrods-front-lower-control-arms-for-nissan-pathfinder-2013-2020-2pc-direct-fit-kit-oe-replacement","title":"maXpeedingrods Front Lower Control Arms for Nissan Pathfinder 2013–2020 — 2Pc Direct-Fit Kit, OE Replacement","description":"\u003cp\u003e\u003cstrong\u003emaXpeedingrods 2Pc front lower control arms are a direct-fit replacement set engineered to restore steering precision and suspension stability for Nissan Pathfinder (2013–2020) and compatible Infiniti models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Pathfinder or compatible Infiniti is showing loose steering, uneven tire wear, or a change in ride quality, worn lower control arms are often the cause. This two-piece kit includes driver and passenger side arms built to match OE mounting points and restore correct wheel alignment geometry. Each arm is designed to replace factory part numbers and OEM equivalents, helping return predictable handling without complex modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these control arms affect handling and ride feel?\u003c\/h3\u003e\n\u003cp\u003eReplacing degraded control arms removes excess play in the front suspension, which improves steering response and helps tires maintain even contact with the road. Expect firmer, more consistent turn-in and reduced wandering at highway speeds. These arms restore the designed suspension geometry so alignment settings are more stable over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for original mounting points and ball joints.\u003c\/li\u003e\n  \u003cli\u003eReduces steering looseness and front-end wander.\u003c\/li\u003e\n  \u003cli\u003eHelps minimize uneven tire wear from worn pivot points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these arms fit my vehicle model and replace OEM numbers?\u003c\/h3\u003e\n\u003cp\u003eYes — the set is specified for Nissan Pathfinder 2013–2020 and fits Infiniti QX60 2014–2022 and Infiniti JX35 2013. The package lists both driver and passenger arms and cross-references common OEM part numbers so installers can confirm compatibility before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Pathfinder 2013–2020 and Infiniti QX60\/JX35 model years listed.\u003c\/li\u003e\n  \u003cli\u003eIncludes both left and right front lower control arms in one kit.\u003c\/li\u003e\n  \u003cli\u003eReplaces multiple OEM\/interchange numbers such as K623064 and K623063.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what should I prepare for installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains one front lower control arm for the driver side (K623064) and one for the passenger side (K623063). Basic suspension tools and a proper alignment after installation are recommended. A professional mechanic or experienced DIYer can perform installation using common shop presses or ball-joint tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage: driver side arm (K623064) and passenger side arm (K623063).\u003c\/li\u003e\n  \u003cli\u003eRecommended: torque wrench, ball-joint press or pickle fork, and alignment service.\u003c\/li\u003e\n  \u003cli\u003ePost-installation: get a wheel alignment to ensure correct toe and camber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does maXpeedingrods provide?\u003c\/h3\u003e\n\u003cp\u003emaXpeedingrods backs this product with lifetime technical support and a one-year limited warranty for quality-related issues from the date of purchase. Customer service can help with fitment questions, installation guidance, and warranty claims if a manufacturing defect is suspected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLifetime technical support for fitment and installation help.\u003c\/li\u003e\n  \u003cli\u003eOne-year limited warranty for material and workmanship issues.\u003c\/li\u003e\n  \u003cli\u003eContact options provided by the brand for prompt assistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This two-piece front lower control arm set suits owners of Nissan Pathfinder (2013–2020) and compatible Infiniti QX60\/JX35 models who need a direct, reliable replacement for worn factory suspension arms. It's aimed at drivers seeking to restore steering accuracy and suspension stability—whether you’re a DIY mechanic doing a repair at home or a shop technician replacing front suspension components. If your vehicle shows symptoms such as looseness in the steering, clunking over bumps, or premature tire wear, this kit provides the necessary components to return the front suspension to proper performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these control arms fit Infiniti QX60 and JX35?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They fit Infiniti QX60 (2014–2022) and Infiniti JX35 (2013) as listed and match the corresponding OEM part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is an alignment required after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A wheel alignment is recommended after replacing front lower control arms to ensure correct toe and camber.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"maXpeedingrods","offers":[{"title":"Default Title","offer_id":67584911802553,"sku":"B0CBTV3NQ2","price":355.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/maxpeedingrods-front-lower-control-arms-packaging-front-view.jpg?v=1790458730"},{"product_id":"krguod-front-upper-control-arm-suspension-kit-4-piece-pre-assembled-ball-joints-for-2007-2016-silverado-tahoe-restores-steering","title":"KRGUOD Front Upper Control Arm Suspension Kit — 4-Piece Pre-Assembled Ball Joints for 2007–2016 Silverado\/Tahoe (Restores Steering","description":"\u003cp\u003e\u003cstrong\u003eKRGUOD front upper control arm with pre-assembled ball joints and two lower ball joints — a 4-piece suspension kit designed to restore steering precision and stabilize ride quality on compatible 2007–2016 GMC and Chevrolet 1500 and full-size SUV models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Silverado, Sierra, Tahoe, Suburban, Escalade, Avalanche or Yukon from the 2007–2016 model years is showing signs of wandering steering, uneven tire wear, or a loose feeling over bumps, worn upper control arms and ball joints are common culprits. This KRGUOD kit replaces both front upper arms (left and right) with pre-assembled ball joints and includes two front lower ball joints, matching OE-style fitment and part numbers to make installation straightforward for mechanics and experienced DIYers.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these replacement arms improve handling and driving feel?\u003c\/h3\u003e\n\u003cp\u003eInstalling new control arms and ball joints restores the factory suspension geometry, which tightens steering response and reduces uncontrolled tire movement. You'll notice more consistent alignment and less play in the front end, especially at highway speeds and during cornering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores original steering responsiveness and vehicle tracking\u003c\/li\u003e\n  \u003cli\u003eReduces uneven tire wear caused by loose suspension components\u003c\/li\u003e\n  \u003cli\u003eStabilizes ride over potholes and rough pavement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is matched to a range of Chevy and GMC full-size trucks and SUVs from 2007 through 2016, covering common OEM part numbers for direct replacement. Always verify fitment with your vehicle before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: 2007–2014 Cadillac Escalade\u003c\/li\u003e\n  \u003cli\u003eFits: 2007–2015 Chevrolet Silverado 1500 and 2007–2016 Chevrolet Tahoe\u003c\/li\u003e\n  \u003cli\u003eFits: 2007–2014 Chevrolet Suburban, 2007–2013 Avalanche\u003c\/li\u003e\n  \u003cli\u003eFits: 2007–2015 GMC Sierra 1500, 2007–2014 GMC Yukon\/Yukon XL\u003c\/li\u003e\n  \u003cli\u003eReplace Part Numbers: K80669 (left), K80670 (right), K6541 (lower ball joints); OEM refs 15096197, 15096198, 12475478\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the KRGUOD 4-piece suspension kit and what does \"pre-assembled\" mean?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies both front upper control arms with ball joints already pressed and secured at the factory, plus two independent lower ball joints. Pre-assembled means the ball joints are installed in the control arms, saving time and ensuring proper seating compared with separate components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Front upper left steel control arm with pre-assembled ball joint (K80669)\u003c\/li\u003e\n  \u003cli\u003e1 x Front upper right steel control arm with pre-assembled ball joint (K80670)\u003c\/li\u003e\n  \u003cli\u003e2 x Front lower ball joints (K6541)\u003c\/li\u003e\n  \u003cli\u003eHardware and installation instructions may be vehicle-specific; professional installation recommended if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare before ordering and installing these parts?\u003c\/h3\u003e\n\u003cp\u003eConfirm vehicle year, make and model against compatibility lists or your seller’s fitment tool. Inspect your front suspension for related wear items—control arm bushings, tie rods, and wheel bearings—to address all sources of handling issues at once.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the online fitment filter to verify compatibility before purchase\u003c\/li\u003e\n  \u003cli\u003eConsider wheel alignment after installation to correct camber and toe\u003c\/li\u003e\n  \u003cli\u003eHave proper tools or a qualified technician perform the replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This KRGUOD suspension kit suits owners and mechanics working on 2007–2016 Chevy and GMC 1500 trucks and full-size SUVs who need a reliable, OEM-style replacement for worn front upper control arms and ball joints. It's ideal for restoring factory steering feel, reducing tire wear, and preparing vehicles for safe daily driving or towing. If you’re unsure about fitment, verify your model year and use the seller’s fitment tool or consult a professional installer before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2009 Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits most 2007–2015 Silverado 1500 models; confirm exact fit with the seller’s fitment tool before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the upper control arms come with ball joints installed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, both front upper control arms include pre-assembled ball joints to simplify installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KRGUOD","offers":[{"title":"Default Title","offer_id":67584912425145,"sku":"B0DRSS72XF","price":200.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/krguod-front-upper-control-arms-kit-packaging.jpg?v=1790458778"},{"product_id":"qagea-a-arm-uhmw-bushing-kit-for-polaris-rzr-xp-1000-2014-heavy-duty-low-friction","title":"Qagea A-Arm UHMW Bushing Kit for Polaris RZR XP 1000 (2014+) — Heavy-Duty, Low-Friction","description":"\u003cp\u003e\u003cstrong\u003eQagea Heavy Duty A-Arm UHMW bushing kit is a complete replacement set engineered to restore smooth suspension pivot action on 2014+ Polaris RZR XP 1000 and RZR XP 4 1000 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis comprehensive Qagea kit supplies all the sleeves, bushings, pivot caps and clamps needed to replace worn or damaged A-arm pivot components on Polaris RZR XP 1000 (and 4-seat XP 4 1000) models from 2014 onward. Made from ultra-high-molecular-weight (UHMW) material, the parts resist wear, offer low friction, and are produced under ISO-certified manufacturing standards. The package replaces OE number AAB-P-RZR1K-K2-001 CT-08 and arrives without installation instructions, so professional fitting or experienced DIY mechanical skills are recommended.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included and how many of each will I receive?\u003c\/h3\u003e\n\u003cp\u003eThe kit is a full replacement set designed to cover both sides of the vehicle’s front A-arms. It contains multiple sleeves, bushings, and pivot caps to complete a standard A-arm rebuild.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 replacement sleeves\u003c\/li\u003e\n  \u003cli\u003e14 bushings\u003c\/li\u003e\n  \u003cli\u003e12 O-ring pivot caps\u003c\/li\u003e\n  \u003cli\u003e4 convex pivot caps\u003c\/li\u003e\n  \u003cli\u003e2 clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does UHMW material improve A-arm performance?\u003c\/h3\u003e\n\u003cp\u003eUHMW (ultra-high-molecular-weight polyethylene) is chosen for pivot components because it combines very low friction with strong wear resistance. That self-lubricating surface reduces binding and chatter at pivot points and extends component life under off-road stresses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelf-lubricating surface to reduce squeaks and stick-slip\u003c\/li\u003e\n  \u003cli\u003eHigh abrasion resistance for longer service life\u003c\/li\u003e\n  \u003cli\u003eLow-moisture absorption helps performance in wet conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my Polaris RZR XP 1000 or XP 4 1000?\u003c\/h3\u003e\n\u003cp\u003eThis Qagea kit is explicitly compatible with Polaris RZR XP 1000 and RZR XP 4 1000 models from 2014 and later. It replaces the factory OE part number AAB-P-RZR1K-K2-001 CT-08. Verify year and model before ordering for an accurate fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: 2014+ Polaris RZR XP 1000 and RZR XP 4 1000\u003c\/li\u003e\n  \u003cli\u003eReplaces OE#: AAB-P-RZR1K-K2-001 CT-08\u003c\/li\u003e\n  \u003cli\u003eSold as a hardware kit—does not include step-by-step install guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and durability?\u003c\/h3\u003e\n\u003cp\u003eQagea parts are made to meet or exceed OEM requirements and undergo 100% factory inspection, but correct installation is key to long-term performance. Because the kit includes small precision pieces and pivot seals, professional installation is recommended unless you have suspension rebuild experience and proper tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eISO-certified manufacturing and 100% factory inspection\u003c\/li\u003e\n  \u003cli\u003eDurable UHMW construction designed for off-road use\u003c\/li\u003e\n  \u003cli\u003e2-year product protection from Qagea for manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This A-arm bushing kit is intended for Polaris RZR owners who are maintaining, restoring, or upgrading the front suspension on 2014 and newer XP 1000 and XP 4 1000 models. It’s suitable for riders who need a complete set of replacement pivot components made from low-friction UHMW material—whether you’re a professional mechanic, a serious off-road enthusiast, or a DIYer comfortable with suspension work. If you prefer guided installation, consider arranging professional service, and contact Qagea directly for support or replacement questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my 2013 Polaris RZR XP 1000?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this kit is compatible with 2014 and later Polaris RZR XP 1000 and XP 4 1000 models only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation hardware included and is installation difficult?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes sleeves, bushings, caps and clamps but no instructions; professional installation is recommended for best results.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Qagea","offers":[{"title":"Default Title","offer_id":67584920027321,"sku":"B0C7Z81ZGY","price":167.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/qagea-a-arm-bushing-kit-front-packaging.jpg?v=1790459186"},{"product_id":"sucoso-upper-control-arms-for-2007-2018-silverado-sierra-1500-red-2-4-lift-adjustable-ball-joint-pu-bushings","title":"SUCOSO Upper Control Arms for 2007–2018 Silverado Sierra 1500 — Red, 2–4\" Lift, Adjustable Ball Joint \u0026 PU Bushings","description":"\u003cp\u003e\u003cstrong\u003eSUCOSO's red upper control arm kit replaces factory arms on 2–4\" lifted 2007–2018 Chevy\/GMC trucks to restore geometry and improve front-end stability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a Silverado, Sierra, Tahoe, Suburban, Yukon or Escalade is lifted, stock upper control arms often bind, cause alignment trouble, or limit suspension travel. These SUCOSO arms are engineered to match 2–4\" lifts, with polyurethane bushings, a wide-angle adjustable ball joint, thicker steel tubing and a powder-coated finish to withstand road stresses while extending component life.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms fix lift-related alignment problems?\u003c\/h3\u003e\n\n\u003cp\u003eThey relocate the upper pivot and lengthen the arm geometry to reduce caster and camber deviations introduced by a 2–4\" lift. The adjustable ball joint allows fine tuning of camber and caster to bring the front alignment back into a safe range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for 2–4\" lifted applications to correct suspension angles.\u003c\/li\u003e\n  \u003cli\u003eAdjustable wide-angle ball joint for alignment tweaks without custom parts.\u003c\/li\u003e\n  \u003cli\u003eImproved travel and reduced bind compared to stock arms on lifted trucks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and parts improve durability and performance?\u003c\/h3\u003e\n\n\u003cp\u003eSUCOSO uses thickened steel tubing with MIG welds and a powder-coated surface to resist corrosion and flex. The upgrade to urethane (PU) bushings and heat-treated alloy-steel ball joint components reduces wear and improves handling precision versus original rubber components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick steel pipe body with powder-coat protects against rust and chips.\u003c\/li\u003e\n  \u003cli\u003ePU bushings with U-groove lubrication channels for smoother operation and less noise.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated alloy ball joint and dust cover to keep contaminants out and lengthen service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these arms fit my truck and what are the fitment limits?\u003c\/h3\u003e\n\n\u003cp\u003eThe SUCOSO upper control arms fit specific GM full-size trucks and SUVs from 2007–2018 when used with a 2–4\" lift. They are not universal — check the exclusions carefully before ordering to avoid compatibility issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2007–2018 Chevy Silverado 1500, Tahoe, Suburban 1500; 2007–2018 GMC Sierra 1500, Yukon, Yukon XL 1500; 2007–2013 Avalanche; 2007–2018 Cadillac Escalade.\u003c\/li\u003e\n  \u003cli\u003eNot compatible: stock-height models, 2007 \"Classic\" older body style, vehicles with 3.5\" lifted knuckles, or with factory 275\/285 width stock tires.\u003c\/li\u003e\n  \u003cli\u003eIntended for 2–4\" lift kits only — confirm ride height and wheel\/tire setup before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is similar to replacing OEM upper control arms but may require alignment afterward. Basic tools and a lift or jack stands are needed; a certified alignment is recommended after installation to ensure proper caster and camber settings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires standard hand tools, torque wrench, and safe vehicle support (jack stands or lift).\u003c\/li\u003e\n  \u003cli\u003eExpect to re-check and perform a professional front-end alignment after install.\u003c\/li\u003e\n  \u003cli\u003eInspect related components (ball joints, tie rods, bushings) while replacing arms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Owners of 2007–2018 GM full-size trucks and SUVs who have installed a 2–4\" lift and need a robust, adjustable upper control arm to restore alignment, reduce binding and improve steering response. Ideal for daily drivers and off-road enthusiasts who want longer-lasting components than OEM arms, plus easier alignment adjustments without major suspension modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these arms fit a stock-height Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. SUCOSO arms are engineered for trucks lifted 2–4 inches and do not fit stock-height models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an alignment after installing these control arms?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A professional front-end alignment is recommended to set correct caster and camber after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SUCOSO","offers":[{"title":"Default Title","offer_id":67584923828409,"sku":"B0D9XX8YR7","price":363.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/sucoso-upper-control-arm-front-view.jpg?v=1790459330"},{"product_id":"ksp-performance-forged-upper-control-arms-for-silverado-sierra-1500-2pcs-2-4-adjustable-t6-aluminum-greasable-ball-joint","title":"KSP PERFORMANCE Forged Upper Control Arms for Silverado\/Sierra 1500 — 2pcs 2–4\" Adjustable T6 Aluminum, Greasable Ball Joint","description":"\u003cp\u003e\u003cstrong\u003eKSP's forged aluminum upper control arms are a one-piece, adjustable front suspension upgrade designed to correct geometry and improve durability for 2007–2018 Chevy Silverado and GMC Sierra 1500 trucks with 2–4\" lifts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese upper control arms (UCAs) replace worn factory units with a forged T6 aluminum assembly that resists corrosion, reduces unsprung weight, and restores proper ball joint angles after moderate lifts. Every arm is CNC machined and inspected to ensure fitment for Silverado\/Sierra models specified, and the serviceable greasable ball joint plus polyurethane bushings make this a maintenance-friendly aftermarket option for street and off-road use.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms improve handling after a 2–4\" lift?\u003c\/h3\u003e\n\u003cp\u003eRaising a truck alters steering and suspension geometry, which can increase tire wear and change handling feel. The KSP forged UCA re-centers the ball joint and provides greater articulation, helping to maintain correct camber and track under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable length accounts for lift-induced geometry changes\u003c\/li\u003e\n  \u003cli\u003eImproved ball joint angle reduces uneven tire wear\u003c\/li\u003e\n  \u003cli\u003eLightweight forged aluminum lowers unsprung mass for crisper response\u003c\/li\u003e\n  \u003cli\u003eServiceable greasable joint preserves movement over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction make these arms durable?\u003c\/h3\u003e\n\u003cp\u003eKSP uses a one-piece forged T6 aluminum design to eliminate welds and weak points common on cheaper arms. The CNC machining provides precise dimensions, while magnetic particle inspection during production verifies structural integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged T6 aluminum body resists rust and fatigue\u003c\/li\u003e\n  \u003cli\u003eZinc-nickel coated, heat-treated ball joint pins inhibit corrosion\u003c\/li\u003e\n  \u003cli\u003ePolyurethane bushings withstand temperature extremes better than rubber\u003c\/li\u003e\n  \u003cli\u003eDust boots and KSP protective covers keep contaminants out\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is maintenance and service for these control arms?\u003c\/h3\u003e\n\u003cp\u003eThe KSP arms are built with serviceability in mind: greasable ball joints allow periodic lubrication to flush contaminants and extend component life. The metal-to-metal ball joint construction and replaceable lubrication points make upkeep straightforward for DIY or professional service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGreasable socket simplifies regular lubrication\u003c\/li\u003e\n  \u003cli\u003eProtective covers and dust boots reduce debris intrusion\u003c\/li\u003e\n  \u003cli\u003eDurable coatings lower likelihood of seizing or corrosion\u003c\/li\u003e\n  \u003cli\u003eDesigned to accept routine shop-level maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my truck and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eThese UCAs are specified for 2007–2018 Chevy Silverado and GMC Sierra 1500 trucks with lifts roughly between 2\" and 4\". They are not compatible with setups that use a 3.5\" lifted knuckle kit. Confirm model year, axle type, and lift method before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: 2007–2018 Silverado\/Sierra 1500 models (2–4\" lift recommended)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 3.5\" lifted knuckle kits\u003c\/li\u003e\n  \u003cli\u003eMeasure current ball joint and arm clearances for assurance\u003c\/li\u003e\n  \u003cli\u003eProfessional alignment recommended after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The KSP Forged Upper Control Arm set is aimed at truck owners who have performed a moderate lift (2–4\") and want a robust, rust-resistant upgrade to restore proper suspension geometry. It suits daily drivers who want improved steering feedback and longevity, as well as off-roaders who need stronger, serviceable components that withstand dirt and moisture. If you need welded or budget cast replacements, this forged aluminum option offers greater strength, corrosion resistance, and long-term serviceability for lifted Silverado and Sierra 1500 trucks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these UCAs fit a 2015 Silverado 1500 with a 3\" lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they are suited for 2–4\" lifts, so a 3\" lift on a 2015 Silverado 1500 is compatible; confirm axle setup and get an alignment after install.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the ball joints be greased?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the KSP arms feature greasable ball joints to flush contaminants and extend service life with periodic lubrication.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584924090553,"sku":"B0CF3ZZHNM","price":686.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-forged-uca-front-packaging.jpg?v=1790459331"},{"product_id":"ksp-performance-silverado-gmc-sierra-upper-control-arms-2-4-lift-forged-aluminum-pair-with-greasable-ball-joints","title":"KSP PERFORMANCE Silverado\/GMC Sierra Upper Control Arms, 2–4\" Lift, Forged Aluminum Pair with Greasable Ball Joints","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE forged aluminum upper control arms replace worn stock UCAs and restore correct suspension geometry for 2007–2018 Chevy Silverado and similar GM trucks lifted 2–4\".\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese aftermarket upper control arms are engineered for Chevy Silverado, GMC Sierra and other compatible GM trucks running 2–4\" lift spacers or lifted shocks. Built from a one-piece forged aluminum alloy with precision CNC finishing, the arms are lighter than steel, resist corrosion, and include greasable, heat-treated ball joints with protective dust boots. The design focuses on restoring alignment range, improving articulation off-road, and extending service life compared with factory components.\u003c\/p\u003e\n\n\u003ch3\u003eWill these UCAs fit my truck and lift setup?\u003c\/h3\u003e\n\u003cp\u003eYes—these control arms are made to fit GM 1500-series trucks and SUVs from model years 2007–2018 when using a 2–4\" lift setup. Compatibility covers Chevy Silverado 1500, Tahoe, Suburban, Avalanche (2007–2013), GMC Sierra 1500, Yukon, Yukon XL 1500, and Cadillac Escalade.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment range: 2007–2018 model years for listed vehicles.\u003c\/li\u003e\n  \u003cli\u003eDesigned for 2\"–4\" lifts using spacers or lifted shocks.\u003c\/li\u003e\n  \u003cli\u003eSold as a pair for the driver and passenger upper positions.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for factory upper control arms with upgraded geometry allowance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the KSP UCA improve suspension performance?\u003c\/h3\u003e\n\u003cp\u003eThe arms restore and broaden suspension geometry angles compared with worn stock parts, allowing better control during acceleration, braking, and cornering. Adjustable geometry helps reduce body roll and improves wheel tracking when the vehicle is lifted.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable design lets you fine-tune camber and caster alignment.\u003c\/li\u003e\n  \u003cli\u003eIncreased ball joint range of motion compared with many factory joints.\u003c\/li\u003e\n  \u003cli\u003eReduces binding and uneven tire wear caused by lifted settings.\u003c\/li\u003e\n  \u003cli\u003eLighter assembly lowers unsprung weight for more responsive handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protective features extend durability?\u003c\/h3\u003e\n\u003cp\u003eKSP builds the upper control arms from a high-quality forged aluminum alloy and finishes them with precision CNC machining for a consistent, corrosion-resistant surface. The greasable, heat-treated ball joints are coated with a zinc-nickel finish and covered by tower dust boots plus an exclusive protective cap to block grit and moisture.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece forged aluminum construction resists rust and fatigue.\u003c\/li\u003e\n  \u003cli\u003eCNC-machined surfaces for precise fit and aesthetics.\u003c\/li\u003e\n  \u003cli\u003eGreasable sockets enable periodic lubrication and longer life.\u003c\/li\u003e\n  \u003cli\u003eZinc-nickel coated, heat-treated ball joints with dual dust protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is similar to replacing factory upper control arms and typically requires basic shop tools and wheel alignment afterward. Because these arms are adjustable, alignment settings (caster, camber) should be checked and tuned after fitting to ensure optimal tire wear and handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounts to factory locations—no welding required.\u003c\/li\u003e\n  \u003cli\u003eTorque fasteners to OEM or specified values during install.\u003c\/li\u003e\n  \u003cli\u003eProfessional alignment recommended after installation.\u003c\/li\u003e\n  \u003cli\u003eSold as a pair for both sides to maintain balanced geometry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: KSP PERFORMANCE forged aluminum upper control arms are intended for owners of 2007–2018 Chevy, GMC, or Cadillac 1500-series trucks and SUVs who have or plan a 2–4\" lift and want stronger, lighter, corrosion-resistant UCAs. This product suits off-road enthusiasts, daily drivers seeking corrected suspension geometry after lift installation, and technicians replacing worn factory UCAs with an adjustable, serviceable aftermarket option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these UCAs require vehicle modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No major modifications—these bolt into factory mounting points and are designed for 2–4\" lifts; an alignment after installation is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the ball joints serviceable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the ball joints are greasable and feature protective boots and a KSP cap for extended service life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584923926713,"sku":"B0DDCFVY12","price":707.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-silverado-uca-front-view.jpg?v=1790459331"},{"product_id":"ksp-performance-adjustable-upper-control-arms-for-silverado-sierra-2500-3500-2-4-lift-tubular-1-25-dom-pair-black","title":"KSP PERFORMANCE Adjustable Upper Control Arms for Silverado\/Sierra 2500-3500 — 2\"–4\" Lift, Tubular 1.25\" DOM Pair (Black)","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE adjustable tubular upper control arms deliver a robust, height-compensating steering link for lifted Silverado\/Sierra 2500\/3500 and compatible GM trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you’ve raised a 2000–2010 Chevrolet Silverado or GMC Sierra 2500\/3500 (or a compatible Hummer H2) and need front suspension components that hold alignment, reduce binding, and look built-for-duty, these adjustable upper control arms are engineered to match 2\"–4\" lifts. Built from 1.25\" DOM tubing with TIG-welded joints, the pair arrives black-finished with upgraded bushings, reworked dust covers, and CNC-machined surfaces to provide both strength and refined fitment.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms improve steering after a 2\"–4\" lift?\u003c\/h3\u003e\n\n\u003cp\u003eAdjustable length and solid construction restore proper axle geometry and help reduce premature tire wear and steering pull caused by lift-induced misalignment. The replaceable ball joints and polyurethane bushings lower deflection compared with stock rubber parts, improving handling precision on paved roads and during towing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdjustable design corrects caster and camber after lift\u003c\/li\u003e\n  \u003cli\u003ePU bushings reduce unwanted movement vs. OEM rubber\u003c\/li\u003e\n  \u003cli\u003eReplaceable ball joints simplify future service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build features guarantee durability?\u003c\/h3\u003e\n\n\u003cp\u003eKSP PERFORMANCE uses 1.25\" DOM tubular steel and TIG welding to create a stronger, more fatigue-resistant arm than thin-walled or MIG-welded alternatives. The update includes CNC machining for accurate interfaces and a protective black finish to resist environmental wear.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1.25\" DOM tubing for higher torsional strength\u003c\/li\u003e\n  \u003cli\u003eTIG-welded seams for enhanced structural integrity\u003c\/li\u003e\n  \u003cli\u003eCNC-machined mating surfaces for better fit and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and service expectations should owners have?\u003c\/h3\u003e\n\n\u003cp\u003eThe arms include greasable joints; follow the listed lubrication instructions and avoid over-torquing zerk fittings to prevent damage. New ball joints typically do not require extra grease within the first year, and the product comes with clear after-sales options should parts need replacement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGrease fittings are present — tighten gently after lubrication\u003c\/li\u003e\n  \u003cli\u003eDo not apply excessive force to copper zerk fittings\u003c\/li\u003e\n  \u003cli\u003eManufacturer offers 12-month ball-joint replacement and 30-day refund policy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these arms fit my vehicle and how easy is installation?\u003c\/h3\u003e\n\n\u003cp\u003eThese upper control arms are designed to fit 2000–2010 Chevrolet Silverado 2500\/3500 HD, 2000–2010 GMC Sierra 2500\/3500 HD, and 2003–2009 Hummer H2 with lifts in the 2\"–4\" range. Installation follows typical suspension replacement steps and benefits from alignment afterward; they are sold as a pair, so both sides match the same geometry and finish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatibility: 2000–2010 Silverado\/Sierra 2500\/3500 HD and 2003–2009 H2\u003c\/li\u003e\n  \u003cli\u003eSold as a set of two, black textured finish\u003c\/li\u003e\n  \u003cli\u003eRecommended wheel alignment after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: These KSP PERFORMANCE upper control arms are aimed at drivers who lifted their heavy-duty GM truck and need rugged, adjustable front suspension links that maintain proper geometry under load. Ideal for owners who tow, haul, or want improved on-road steering after installing a 2\"–4\" lift, and for DIY mechanics or shops seeking straightforward, serviceable components backed by a clear parts-replacement policy.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these arms fit a 2007 Silverado 2500HD with a 3\" lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They’re adjustable and engineered to accommodate 2\"–4\" lifts on 2000–2010 Silverado\/Sierra 2500\/3500 HD models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is greasing required right away for the new ball joints?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. New ball joints typically don’t need added grease within the first year; follow manufacturer lubrication guidance afterward.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584933396665,"sku":"B09K7K4RJW","price":485.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-front-view-pair.jpg?v=1790459654"},{"product_id":"ksp-performance-front-upper-control-arms-for-silverado-sierra-1500-2-4-adjustable-tubular-a-arms-greaseable-black-pair","title":"KSP PERFORMANCE Front Upper Control Arms for Silverado \u0026 Sierra 1500 — 2-4\" Adjustable Tubular A-Arms, Greaseable Black Pair","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE front upper control arms are a pair of adjustable tubular A-arms designed to replace factory arms after a 2–4\" lift on 1999–2006 Chevy and GMC 1500-series trucks and SUVs, restoring proper alignment and suspension geometry.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you've lifted a Silverado, Sierra, Tahoe, Yukon or related GM 1500-series vehicle, the stock upper control arms often no longer align correctly with the chassis. These KSP PERFORMANCE tubular control arms are engineered to correct the suspension geometry created by a 2–4\" lift, using heavy-duty materials, CNC machining and greaseable joints to suit off-road and lifted-street use.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms correct handling after a 2–4\" lift?\u003c\/h3\u003e\n\u003cp\u003eRaising the ride height changes caster and camber angles; these adjustable A-arms reposition the upper ball joint and restore alignment range. The tubular design and adjustable length let you dial in correct geometry without bending factory components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable length to compensate for 2–4\" lift\u003c\/li\u003e\n  \u003cli\u003eTubular construction maintains strength and reduces weight\u003c\/li\u003e\n  \u003cli\u003eCNC-machined connections for precise fitment\u003c\/li\u003e\n  \u003cli\u003ePre-installed dust boots and greaseable sockets to protect joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and manufacturing features improve durability?\u003c\/h3\u003e\n\u003cp\u003eThese arms use thickened cold-drawn steel tubing and high-frequency heat-treated alloy ball pins for enhanced fatigue resistance. A durable powder-coat finish prevents rust, while PU bushings and greaseable joints extend service life in varied temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePowder-coated surface to resist corrosion\u003c\/li\u003e\n  \u003cli\u003eCold-drawn steel tubing for structural integrity\u003c\/li\u003e\n  \u003cli\u003eHeat-treated alloy ball pin for stronger joint performance\u003c\/li\u003e\n  \u003cli\u003ePolyurethane bushings for long-lasting, temperature-resistant operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and model years are compatible?\u003c\/h3\u003e\n\u003cp\u003eThese KSP PERFORMANCE upper control arms are engineered for a wide range of GM 1500-series models spanning late 1990s through mid-2000s. Confirm your exact year, make and model before purchase to ensure a proper fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevy Silverado 1500 (1999–2006)\u003c\/li\u003e\n  \u003cli\u003eChevy Avalanche 1500 (2002–2006), Suburban \u0026amp; Tahoe (2000–2006)\u003c\/li\u003e\n  \u003cli\u003eGMC Sierra 1500 (1999–2006), Yukon \u0026amp; Yukon XL 1500 (2000–2006)\u003c\/li\u003e\n  \u003cli\u003eExpress\/Savana 1500 (2003–2013), Cadillac Escalade series (2002–2006)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should these arms be maintained for long life?\u003c\/h3\u003e\n\u003cp\u003ePeriodic greasing of the zerk fittings preserves the internal socket and reduces wear—avoid over-tightening the zerk to prevent damage. New ball joints typically do not require additional grease within the first year; always follow installation torque specs and check fittings after initial road miles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTighten zerk fittings after refilling grease, but don’t overtighten\u003c\/li\u003e\n  \u003cli\u003eNew ball joints: no extra grease needed within the first year\u003c\/li\u003e\n  \u003cli\u003eInspect dust boots and bushings periodically for damage\u003c\/li\u003e\n  \u003cli\u003eRecheck alignment after installation and after first few hundred miles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These control arms are aimed at truck and SUV owners who have lifted their 1999–2006 GM 1500-series vehicles by 2–4 inches and need a robust, adjustable replacement to restore proper suspension geometry. Installers range from experienced DIYers with alignment tools to professional shops upgrading lifted rigs for improved on- and off-road handling. If you require corrosion-resistant components, greaseable joints and polyurethane bushings for extended service life, these KSP PERFORMANCE tubular A-arms are built to meet those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these arms fit my 2004 Chevy Silverado with a 3\" lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the arms are adjustable for 2–4\" lifts and list fitment for 1999–2006 Silverado 1500; confirm your submodel and suspension setup before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the ball joints require immediate greasing after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — new ball joints generally do not need added grease within the first year; grease zerk fittings as part of routine maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584933462201,"sku":"B0BN7SS1FL","price":467.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-front-upper-control-arms-front-packaging.jpg?v=1790459655"},{"product_id":"skuch-4x4-accessories-front-upper-control-arm-for-2-4-lift-high-strength-steel-preassembled-ball-joint","title":"SKUCH 4X4 ACCESSORIES Front Upper Control Arm for 2-4\" Lift — High-Strength Steel, Preassembled Ball Joint","description":"\u003cp\u003e\u003cstrong\u003eThese SKUCH 4X4 ACCESSORIES front upper control arms replace factory forged-steel units to reliably support 2–4\" lift setups for select 2007–2018 GM full-size trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you’ve lifted a Chevy Silverado, GMC Sierra, Suburban, Avalanche, Tahoe, Yukon, Yukon XL or Cadillac Escalade ESV by 2 to 4 inches and need dependable upper control arms, this assembly is built to match that demand. Constructed from high-strength steel and supplied with preassembled ball joints and dust covers, the SKUCH 4X4 control arm aims to restore correct suspension geometry, improve handling under lift, and resist road contaminants for longer service life.\u003c\/p\u003e\n\n\u003ch3\u003eWhat vehicles and factory arm types are compatible?\u003c\/h3\u003e\n\u003cp\u003eThis part fits late-model GM 1500-series trucks and large SUVs produced within the listed years only when the original upper control arms are forged steel. It will not replace stamped-steel or aluminum factory arms. Confirm your vehicle’s factory arm construction before ordering to ensure proper fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment includes: 2007–2018 Chevy Silverado \/ GMC Sierra 1500\u003c\/li\u003e\n  \u003cli\u003eAlso fits: 2007–2014 Chevy Suburban 1500, 2007–2013 Avalanche\u003c\/li\u003e\n  \u003cli\u003eAnd: 2007–2014 GMC Tahoe, Yukon, Yukon XL and 2007–2014 Cadillac Escalade ESV\u003c\/li\u003e\n  \u003cli\u003eNot compatible with stamped-steel or aluminum original upper control arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the control arm built to handle lift and off-road stress?\u003c\/h3\u003e\n\u003cp\u003eThe arm is fabricated from high-strength steel with a solid mounting bracket and comprehensive welding for structural integrity. Full-length TIG-style welds reduce voids and help prevent premature failure, making the assembly more resistant to the forces introduced by larger tires and altered suspension geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-gauge steel construction for improved strength\u003c\/li\u003e\n  \u003cli\u003eFull-length welding for enhanced structural stability\u003c\/li\u003e\n  \u003cli\u003eSolid mounting bracket for dependable attachment points\u003c\/li\u003e\n  \u003cli\u003ePreassembled ball joint integrates pivoting movement cleanly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability features come with this assembly?\u003c\/h3\u003e\n\u003cp\u003eThe assembled upper control arm includes a sealed ball joint with dust cover to limit exposure to water, dirt, and road chemicals. That protective detailing, combined with corrosion-resistant finishes and wear-resistant materials, helps extend functional life compared with an unprotected joint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBall joint with dust cover to keep contaminants out\u003c\/li\u003e\n  \u003cli\u003eWear-resistant materials and protective finishes\u003c\/li\u003e\n  \u003cli\u003eDesigned to preserve steering and suspension pivot accuracy\u003c\/li\u003e\n  \u003cli\u003ePreassembly streamlines replacement and reduces shop time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation for mechanics or do-it-yourselfers?\u003c\/h3\u003e\n\u003cp\u003eSKUCH 4X4 provides these arms preassembled so they swap into place without cutting or drilling in most installations. Basic suspension knowledge and common tools are typically sufficient, but alignment is recommended after replacement to restore proper tire wear and handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo drilling or cutting required for compatible vehicles\u003c\/li\u003e\n  \u003cli\u003eAll components preassembled to reduce installation steps\u003c\/li\u003e\n  \u003cli\u003eReplace old or damaged arms directly to maintain suspension geometry\u003c\/li\u003e\n  \u003cli\u003eProfessional alignment recommended after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This SKUCH 4X4 2–4\" front upper control arm is aimed at owners and fabricators of lifted 2007–2018 GM 1500-series trucks and large SUVs who require a forged-steel replacement to preserve correct suspension geometry and improved durability. It’s ideal for owners fitting larger tires or seeking sturdier factory-equivalent components, provided the original upper arms are forged steel—not stamped or aluminum. If you need a direct-fit, welded-steel upper arm with a sealed ball joint to support a modest lift and daily driving or light off-road use, this part meets that need.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these replace stamped-steel or aluminum factory arms?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These SKUCH arms only replace vehicles equipped with factory forged-steel upper control arms.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an alignment after installing these control arms?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A wheel alignment is recommended after installation to restore proper tire wear and handling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKUCH 4X4 ACCESSORIES","offers":[{"title":"Default Title","offer_id":67584945750201,"sku":"B0BRD2WGSZ","price":304.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skuch-front-upper-control-arm-front-view.jpg?v=1790460402"},{"product_id":"scitoo-front-suspension-kit-for-toyota-corolla-2009-2013-12-piece-oem-style-complete-set-pre-greased","title":"SCITOO Front Suspension Kit for Toyota Corolla 2009-2013, 12‑Piece OEM-Style Complete Set Pre-Greased","description":"\u003cstrong\u003eSCITOO’s 12-piece front suspension kit is a complete OEM-style replacement set engineered to restore steering precision and front-end stability for Toyota Corolla models 2009–2013.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Corolla shows steering play, uneven tire wear, clunks over bumps, or wandering on the road, replacing worn front suspension components with a full kit is an efficient way to bring back factory-like handling. This SCITOO kit bundles both lower control arms, ball joints, inner and outer tie rod ends, sway bar end links, and steering rack boots so you can address multiple wear points in a single installation. All parts arrive pre-greased and include the hardware you need for a straightforward swap with direct-fit compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit my Toyota Corolla exactly?\u003c\/h3\u003e\n\u003cp\u003eThe set is designed as a direct OEM-style replacement for Toyota Corolla model years 2009 through 2013. Fitment has been verified through SCITOO’s compatibility checks and commonly matched to factory mounting locations and fastener patterns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit parts for Corolla 2009, 2010, 2011, 2012, 2013.\u003c\/li\u003e\n  \u003cli\u003eIncludes driver and passenger lower control arms for a full front-end overhaul.\u003c\/li\u003e\n  \u003cli\u003ePre-greased components reduce initial break-in and installation effort.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit improve steering and ride quality?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn control arms, ball joints, and tie rod ends removes the play and slop that cause vague steering and front-end shimmy. The new sway bar links and sealed rack boots help stabilize body roll and protect the steering gear from contaminants, contributing to a smoother, more controlled drive.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores steering responsiveness by eliminating worn joint play.\u003c\/li\u003e\n  \u003cli\u003eReduces clunks and vibration from loose or damaged front-end parts.\u003c\/li\u003e\n  \u003cli\u003eSealed boots and pre-greased joints extend service life and reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction standards does SCITOO use?\u003c\/h3\u003e\n\u003cp\u003eSCITOO manufactures the kit components from high-strength steel with precision forging and heat treatment to increase durability over standard cast parts. Protective finishes and quality testing for impact, fatigue, and weather resistance are applied to ensure the parts endure everyday driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged, heat-treated steel for improved toughness and impact resistance.\u003c\/li\u003e\n  \u003cli\u003eProfessional-grade coatings to resist corrosion and road wear.\u003c\/li\u003e\n  \u003cli\u003eParts tested for fatigue and weather exposure for long-term performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe 12-piece set contains both front lower control arms (driver and passenger), two front lower ball joints, two inner tie rod ends, two outer tie rod ends, two sway bar end links, and two steering rack boots. SCITOO supplies the necessary hardware and pre-lubrication to simplify installation, but wheel alignment after replacement is recommended for safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete set: 2 lower control arms, 2 ball joints, 4 tie rod ends, 2 sway bar links, 2 rack boots.\u003c\/li\u003e\n  \u003cli\u003eAll parts pre-greased and include mounting hardware for a more efficient install.\u003c\/li\u003e\n  \u003cli\u003eProfessional or experienced DIY install advised; alignment required after fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: drivers and mechanics who need a thorough front-end refresh for Toyota Corolla 2009–2013 — ideal for daily commuters, vehicles with high mileage, or cars showing steering looseness and uneven tire wear. If you want a single purchase that replaces the common wear items in the front suspension with OEM-style components and a one-year replacement coverage, this SCITOO 12-piece kit provides a cost-effective, long-lasting solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit compatible with other Corolla years or models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This set is made for Toyota Corolla 2009–2013. For other years or trims, verify fitment with vehicle specs before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation include alignment or hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes mounting hardware and pre-greased parts; a professional wheel alignment after installation is required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SCITOO","offers":[{"title":"Default Title","offer_id":67584953548985,"sku":"B0CPBRX5M8","price":280.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/scitoo-front-suspension-kit-packaging.jpg?v=1790460791"},{"product_id":"ksp-performance-upper-control-arms-for-2021-26-f150-adjustable-2-4-lift-with-greasable-ball-joints","title":"KSP PERFORMANCE Upper Control Arms for 2021–26 F150 — Adjustable 2–4\" Lift with Greasable Ball Joints","description":"\u003cstrong\u003eKSP PERFORMANCE upper control arms are adjustable, greasable aftermarket replacements engineered to lift and correct front suspension geometry on 2021–2026 Ford F150 trucks (not compatible with Raptor).\u003c\/strong\u003e\n\n\u003cp\u003eThese KSP PERFORMANCE upper control arms upgrade the factory fixed-angle units with a robust, adjustable design that provides 2–4 inches of front lift compatibility while restoring proper alignment and clearance for larger wheels and tires. Built from heat-treated alloy steel and finished with a powder coat, they include greasable ball joints, PU bushings, and a dust boot to extend service life under road and off-road conditions. The arms are designed for 2021–2026 F150 models and are intended as an aftermarket replacement to improve geometry after lifting the truck.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms improve lifted F150 handling and alignment?\u003c\/h3\u003e\n\u003cp\u003eReplacing the factory upper control arms with KSP's adjustable units corrects caster and camber changes caused by front lifts. The adjustable length and correct geometry help return steering stability and reduce premature tire wear after suspension modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable design supports 2–4\" front lift setups for proper alignment.\u003c\/li\u003e\n  \u003cli\u003eDom tuber arm shape reduces interference with larger wheel\/tire combos.\u003c\/li\u003e\n  \u003cli\u003ePU bushings maintain stiffness for consistent steering response.\u003c\/li\u003e\n  \u003cli\u003ePre-installed dust boot protects the socket from dirt and debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features make these arms durable?\u003c\/h3\u003e\n\u003cp\u003eKSP PERFORMANCE built these arms with corrosion resistance and strength in mind. The powder-coated finish and thick cold-drawn steel tubing resist rust and maintain structural integrity under load, while heat-treated alloy steel ball pins increase durability at critical wear points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePowder-coated surface to prevent rust and corrosion.\u003c\/li\u003e\n  \u003cli\u003eThickened cold-drawn steel tubing for chassis correction and strength.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated alloy steel ball pin for long-lasting performance.\u003c\/li\u003e\n  \u003cli\u003eGreasable joint and hex hole on the ball pin for easier install and maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain these upper control arms for longevity?\u003c\/h3\u003e\n\u003cp\u003eMaintenance is straightforward: use the greasable zerk fitting periodically, but avoid over-torquing the zerk to prevent damage. New ball joints typically do not require additional grease within the first year, and the greaseable design lets you flush contaminants from the joint when service is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTighten zerk fittings gently after greasing; avoid excessive force to prevent breakage.\u003c\/li\u003e\n  \u003cli\u003eNo extra grease needed for new ball joints within the first year under normal use.\u003c\/li\u003e\n  \u003cli\u003eRegularly inspect dust boot and bushings for tears or excessive wear.\u003c\/li\u003e\n  \u003cli\u003eRe-grease periodically to remove contaminants and reduce corrosion risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these arms fit my 2021–2026 F150 and my wheel\/tire setup?\u003c\/h3\u003e\n\u003cp\u003eThese upper control arms fit 2021 through 2026 Ford F150 models but are not designed for the F150 Raptor. KSP simulated clearance for 20x8.5 ET44 wheels with 275\/60R20 tires on high-powered trims to minimize interference, but buyers should verify their exact year and configuration before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment confirmed for 2021–2026 F150 models; excludes Raptor models.\u003c\/li\u003e\n  \u003cli\u003eDesigned to accommodate 20x8.5 ET44 wheels with 275\/60R20 tires in testing scenarios.\u003c\/li\u003e\n  \u003cli\u003eUseful for trucks with 2–4\" front lift where factory arms cause clearance or geometry issues.\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle year\/make\/model compatibility before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? KSP PERFORMANCE adjustable upper control arms are aimed at F150 owners who have lifted their truck 2–4 inches up front, installers performing suspension upgrades, and drivers who want to restore proper steering geometry after lift kits. They suit enthusiasts fitting larger wheels\/tires who need stronger, serviceable components and mechanics seeking a direct replacement with greasable joints and durable construction. KSP offers a 30-day refund and 12-month free replacement policy and recommends verifying compatibility prior to purchase; contact KSP PERFORMANCE support for fitment or installation questions.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these arms fit F150 Raptor models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These KSP PERFORMANCE upper control arms are not compatible with F150 Raptor models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much lift do they support and do they need grease right away?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They support approximately 2–4 inches of front lift; new ball joints typically don’t need additional grease during the first year.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584953712825,"sku":"B0D6R7JTS1","price":586.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-uca-front-view_82af1c3b-7e1e-4ad0-8431-fe105d648dac.jpg?v=1790460792"},{"product_id":"ksp-performance-ram-1500-adjustable-upper-control-arms-0-2-lift-1-25-dom-tubing-powder-coated","title":"KSP PERFORMANCE Ram 1500 Adjustable Upper Control Arms 0–2\" Lift, 1.25\" DOM Tubing \u0026 Powder-Coated","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE 0–2\" adjustable upper control arms are heavy-duty, direct-fit replacements for Ram 1500 front upper control arms that restore alignment and support mild lifts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese upper control arms (UCAs) are engineered as an OE-style upgrade to replace factory part numbers 55398403AA, 68163961AD, 68227901AB, 522-467, RK643074 (driver side) and corresponding passenger variants. Built from 1.25\" DOM tubing with MIG-welded joints and a professional powder-coat finish, they are designed to withstand tougher loads than stamped or molded factory arms while maintaining factory-like ride feel. They fit 2009–2010 Dodge Ram 1500 and 2011–2024 Ram 1500 (including 2019–2024 Ram 1500 Classic) in both 2WD and 4WD configurations and accept 0–2\" of suspension lift.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these UCAs improve handling and alignment on a lifted Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eBy replacing worn or weak stock arms with a stronger tubular design, the KSP UCAs reduce flex under load and keep the wheel geometry more consistent. That results in improved steering response and better tire contact during cornering and braking without significantly changing ride comfort.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25\" DOM tubing provides greater stiffness and durability than stamped steel.\u003c\/li\u003e\n  \u003cli\u003eMIG-welded seams create a reinforced structure that resists stress fractures.\u003c\/li\u003e\n  \u003cli\u003eAccepts 0–2\" lift while maintaining proper camber and caster range for alignment.\u003c\/li\u003e\n  \u003cli\u003eDurable polyurethane bushings preserve OEM-like steering feel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these arms fit my specific Ram model and replace factory part numbers?\u003c\/h3\u003e\n\u003cp\u003eYes—these UCAs are made to be direct-fit replacements for listed OEM references and compatible Ram years. Install is straightforward for most technicians and they bolt in where the factory arms were removed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront driver side replaces 55398403AA, 68163961AD, 68227901AB, 522-467, RK643074.\u003c\/li\u003e\n  \u003cli\u003eFront passenger side replaces 55398404AA, 68163960AD, 68227900AB, 522-468, RK643073.\u003c\/li\u003e\n  \u003cli\u003eFits 2009–2010 Dodge Ram 1500 and 2011–2024 Ram 1500 (incl. 2019–2024 Classic), 2WD \u0026amp; 4WD.\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct replacement—no major frame modification required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes are used, and how do they affect longevity?\u003c\/h3\u003e\n\u003cp\u003eKSP PERFORMANCE builds these arms from robust materials and applies corrosion protection to extend service life. The combination of tubular construction, MIG welding, polyurethane bushings, and powder coating resists wear, rust, and typical road stresses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25\" DOM steel tubing for higher tensile strength and smooth finish for optional paint.\u003c\/li\u003e\n  \u003cli\u003eMIG welding for consistent, reinforced joints under dynamic loads.\u003c\/li\u003e\n  \u003cli\u003eProfessional powder coat to prevent corrosion and the need for frequent touch-ups.\u003c\/li\u003e\n  \u003cli\u003eDurable polyurethane bushings maintain performance and reduce premature tire wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these UCAs adjustable, and what does that mean for my alignment?\u003c\/h3\u003e\n\u003cp\u003eThe arms are built to allow small adjustments to correct camber and caster changes caused by lifts up to 2\". That adjustability helps align the front end within proper factory tolerances after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable link ends accommodate slight suspension geometry changes from lifts.\u003c\/li\u003e\n  \u003cli\u003eHelps bring camber and caster back to specification for stable steering.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common alignment procedures at any professional shop.\u003c\/li\u003e\n  \u003cli\u003eNew ball joints come pre-greased—no extra grease required within first year.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These KSP PERFORMANCE 0–2\" upper control arms are built for Ram 1500 owners and technicians who need a reliable, stronger-than-stock replacement that supports mild lifts while preserving predictable handling. Ideal for drivers upgrading worn factory arms, installing a small suspension lift, or anyone seeking a durable OE-style upgrade with corrosion protection and straightforward fitment.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eBrand promise: KSP PERFORMANCE provides a 30-day refund and 1-year free replacement parts policy. Contact KSP for any installation or product questions.\u003c\/em\u003e\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these control arms fit a 2015 Ram 1500 4WD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these KSP UCAs fit 2011–2024 Ram 1500 models, including 2015 4WD, as direct replacements for listed OEM part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use them with a 2\" suspension lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these arms are rated for 0–2\" of lift and include adjustability to help restore alignment within factory ranges.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584960266425,"sku":"B0D3PMRSYL","price":440.61,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-front-packaging-uca-ram1500.jpg?v=1790461090"},{"product_id":"ksp-performance-upper-control-arms-for-f-150-2-4-inch-tubular-black-pair-front-lift-durable","title":"KSP PERFORMANCE Upper Control Arms for F-150 2–4 inch Tubular Black Pair — Front Lift \u0026 Durable","description":"\u003cp\u003e\u003cstrong\u003eKSP 2–4\" Upper Control Arms are a direct-replacement, heavy-duty tubular suspension upgrade designed to lift and improve front-end geometry on 2004–2020 Ford F-150 trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement upper control arms are engineered to raise the front of compatible F-150s 2 to 4 inches while maintaining proper ball joint and steering geometry. Constructed with larger-diameter tubing, MIG welds and polyurethane bushings, the arms aim to be stiffer and more durable than worn stock components. They are sold as a complete pair with upgraded ball joints and are intended as a direct swap for factory arms on many model years of the F-150.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these arms affect my truck’s lift and wheel fitment?\u003c\/h3\u003e\n\u003cp\u003eInstalling the KSP upper control arms repositions the spindle mount to allow roughly 2–4 inches of front lift without necessarily changing stock shocks. Wheel and tire clearance can be affected, so verify wheel offset and spacer needs before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides a 2\" minimum lift and up to 4\" depending on vehicle setup.\u003c\/li\u003e\n  \u003cli\u003eConservative factory wheels (ET44) may cause rubbing—1.5\" spacers or zero-offset wheels recommended.\u003c\/li\u003e\n  \u003cli\u003eMay not require shock replacement for a 2\" lift in many cases.\u003c\/li\u003e\n  \u003cli\u003eAftermarket rims may need customer service confirmation for fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and design features improve durability and performance?\u003c\/h3\u003e\n\u003cp\u003eKSP’s tubular arms use larger-diameter steel tubing with MIG welds for added structural strength. The design replaces rubber bushings with polyurethane and includes dust caps to protect moving components for longer service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMIG-welded larger tubing for increased rigidity and safety.\u003c\/li\u003e\n  \u003cli\u003ePolyurethane bushings that resist cold-weather hardening better than rubber.\u003c\/li\u003e\n  \u003cli\u003eDust caps to extend ball joint life by keeping contaminants out.\u003c\/li\u003e\n  \u003cli\u003e2nd-generation pipe angle improvements for better off-road articulation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and maintenance requirements?\u003c\/h3\u003e\n\u003cp\u003eThese arms are intended as direct replacements but require proper installation practices, including a post-installation alignment. The ball joints come pre-filled; no extra grease is typically required, though the zerk fittings should be handled carefully if used.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional or experienced DIY installation recommended to ensure alignment.\u003c\/li\u003e\n  \u003cli\u003eWheel alignment required after installation for safe handling and tire wear.\u003c\/li\u003e\n  \u003cli\u003eDo not over-tighten copper zerk fittings; they can break if over-stressed.\u003c\/li\u003e\n  \u003cli\u003eIf you re-grease, tighten zerks in any orientation but avoid excessive torque.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These KSP upper control arms suit F-150 owners (2004–2020) seeking a robust, budget-friendly front lift solution and a stronger alternative to worn OEM arms. They are a sensible choice for drivers who want improved front-end geometry for larger tires or light off-road use, and for anyone replacing failing factory components with an emphasis on durability. Make sure to check wheel offset and, if using aftermarket wheels, contact KSP customer support to confirm fitment. KSP offers a 30-day refund policy and a 12-month free replacement for the ball joints if needed, giving additional peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these replace factory upper control arms on my 2004–2020 F-150?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are direct-replacement tubular upper control arms designed to fit many 2004–2020 F-150 models, but verify wheel offset and suspension setup before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need new shocks when lifting 2–4 inches?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A 2\" lift often works without changing shocks, but higher lifts or specific shock travel needs may require upgraded shocks and alignment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584960430265,"sku":"B07T7VH9V6","price":492.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-upper-control-arms-front-packaging.jpg?v=1790461110"},{"product_id":"ksp-performance-upper-control-arms-for-f-150-2004-2020-2-4in-lift-adjustable-ball-joint-red","title":"KSP PERFORMANCE Upper Control Arms for F-150 2004–2020 — 2–4in Lift, Adjustable Ball Joint, Red","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE 2–4\" Upper Control Arms are heavy-duty, adjustable replacement arms engineered to safely lift 2004–2020 Ford F-150 trucks while restoring alignment and suspension geometry.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need a robust aftermarket upper control arm for a lifted F-150, these arms replace the factory units and are built to handle the extra angles introduced by 2–4\" front lift kits. Constructed from 1.25\" DOM tubing with MIG-welded joints, pre-greased ball joints, and polyurethane bushings, the assembly aims to be a more durable alternative to stock arms, particularly for trucks running larger tires or harsher driving conditions. They come powder-coated red for corrosion resistance and include service notes for proper installation and maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms accommodate a 2–4\" front lift?\u003c\/h3\u003e\n\u003cp\u003eThe arms are purpose-shaped to correct upper suspension geometry after installing a moderate lift, improving caster and camber compared with unmodified factory arms. Their tube angle and ball joint location are optimized for a 2\" lift without requiring shock changes, and they remain adjustable to fine-tune alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25\" DOM tubular construction resists bending under load.\u003c\/li\u003e\n  \u003cli\u003eMIG-welded joints for reinforced structural integrity.\u003c\/li\u003e\n  \u003cli\u003eAdjustable ball joint lets you dial in alignment after installation.\u003c\/li\u003e\n  \u003cli\u003eDesigned to work with 2–4\" lifts; 2\" lift typically needs no shock swap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and components improve durability over OEM arms?\u003c\/h3\u003e\n\u003cp\u003eThese replacement arms use larger-diameter tubing and polyurethane bushings to increase component life and reduce deflection compared with rubber-bushed factory arms. The ball joints are pre-greased for easier initial use, and a dust cap helps protect the joint from contaminants, extending service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePolyurethane (PU) bushings resist cold-temperature degradation better than rubber.\u003c\/li\u003e\n  \u003cli\u003ePre-greased ball joint with dust cap reduces immediate maintenance needs.\u003c\/li\u003e\n  \u003cli\u003ePowder-coated finish helps prevent rust and corrosion in road conditions.\u003c\/li\u003e\n  \u003cli\u003eMIG welding adds consistent strength across critical seams.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I need additional parts or alignment after installing them?\u003c\/h3\u003e\n\u003cp\u003eAlignment is required after installation to ensure safe steering and even tire wear, and depending on wheel\/tire setup you might need wheel spacers if larger tires are used on stock wheels. Follow the maintenance notes: avoid over-tightening the copper zerks and re-grease only as recommended to prevent damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePost-install alignment is mandatory for correct suspension geometry.\u003c\/li\u003e\n  \u003cli\u003eWheel spacers may be necessary with larger tires on factory wheels.\u003c\/li\u003e\n  \u003cli\u003eDo not over-tighten grease zerks — they can snap if overtightened.\u003c\/li\u003e\n  \u003cli\u003eBall joints are pre-greased; no extra grease needed within the first year.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does KSP PERFORMANCE provide?\u003c\/h3\u003e\n\u003cp\u003eKSP PERFORMANCE includes a 30-day refund window and a 12-month free replacement for the ball joint to address initial defects or early failures. Customer support is available for fitment questions, especially if you changed wheel or rim sizes and need confirmation before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30-day refund policy for buyer satisfaction.\u003c\/li\u003e\n  \u003cli\u003e12-month free replacement on ball joints.\u003c\/li\u003e\n  \u003cli\u003eCustomer service contact to verify fitment with aftermarket rims.\u003c\/li\u003e\n  \u003cli\u003eInstallation notes provided to minimize common mistakes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These KSP PERFORMANCE upper control arms are aimed at F-150 owners (model years 2004–2020) who want a rugged aftermarket replacement for stock arms when running 2–4\" front lifts, larger tires, or more demanding driving conditions. They suit owners who prefer stronger tubular construction, longer-lasting PU bushings, and adjustable ball joints for alignment tuning. If you drive off-road, use larger tires, or need a durable OEM upgrade for lift suspension geometry, these arms are a practical choice; for any non-standard wheel or tire combinations, contact KSP to confirm compatibility before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these arms fit my 2015 F-150 with a 2\" lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they fit 2004–2020 F-150 models and are shaped for a 2\" front lift; alignment is required after install.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to grease the ball joints right away?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the ball joints are pre-greased and typically don’t need extra grease within the first year.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584960594105,"sku":"B0DHYXZ18M","price":503.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-upper-control-arm-front-view.jpg?v=1790461110"},{"product_id":"ksp-performance-upper-control-arms-for-ram-1500-2-4-lift-tubular-arms-package-of-2-with-pu-bushings-2009-2022","title":"KSP PERFORMANCE Upper Control Arms for Ram 1500 — 2–4\" Lift Tubular Arms (Package of 2) with PU Bushings, 2009–2022","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE Upper Control Arms are a heavy‑duty tubular suspension upgrade designed to restore proper alignment and ball joint geometry on lifted Ram 1500 trucks with 2–4\" of lift.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Version 2.0 upper control arms replace the factory arms on Ram 1500 2WD and 4WD models from 2009 through 2022, improving suspension strength and steering stability after a lift. Built from 1.25\" DOM tubing with reinforced welds and upgraded bushings, they aim to provide a robust, longer‑lasting alternative to OE components while accommodating lifted ride heights.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms affect steering and alignment after lifting a Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eInstalling properly sized upper control arms repositions the ball joint and spindle, reducing excessive caster and camber changes caused by a lift. That helps maintain predictable steering feel and makes alignment easier to dial in at the shop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct ball joint geometry for 2–4\" lifts\u003c\/li\u003e\n  \u003cli\u003eReduces premature tire wear from misalignment\u003c\/li\u003e\n  \u003cli\u003eImproves straight‑line stability and steering returnability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features make these arms durable?\u003c\/h3\u003e\n\u003cp\u003eThese arms use 1.25\" DOM (drawn‑over‑mandrel) tubing for consistent wall thickness and strength, plus reinforced MIG welds for structural integrity. Version 2.0 adds polyurethane bushings and a longer‑life dust cover to resist wear under road and off‑road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25\" DOM tube delivers superior strength versus stamped steel\u003c\/li\u003e\n  \u003cli\u003eMIG welded joints for reinforced load paths\u003c\/li\u003e\n  \u003cli\u003ePU bushings and extended dust covers for improved longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance steps should I expect?\u003c\/h3\u003e\n\u003cp\u003eThese control arms are a direct replacement for many factory applications and come as a pair. Basic suspension tools and a professional alignment are recommended after installation; the ball joints are pre‑greased and usually need no added grease for the first year.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes as a package of two upper control arms ready to install\u003c\/li\u003e\n  \u003cli\u003eTighten zerk fittings gently after greasing; avoid over‑torquing\u003c\/li\u003e\n  \u003cli\u003ePerform a full wheel alignment after installation for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and after‑sales support does KSP PERFORMANCE provide?\u003c\/h3\u003e\n\u003cp\u003eKSP PERFORMANCE backs these arms with a 12‑month ball joint replacement policy and a 30‑day refund policy. If issues arise after 30 days, the brand offers replacement parts to resolve problems without extra charge.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12‑month free replacement on ball joints\u003c\/li\u003e\n  \u003cli\u003e30‑day refund window, then free replacement parts if needed\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment or installation questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These KSP PERFORMANCE Version 2.0 upper control arms are aimed at Ram 1500 owners (2009–2022) who have added a 2–4\" lift or are upgrading worn suspension components and want a stronger, more durable tubular arm. They suit drivers who need improved steering geometry and tougher build quality for street and light off‑road use, and who will have the vehicle professionally aligned after installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my Ram 1500 with a 3\" lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These arms are designed to work with 2–4\" lifts on Ram 1500 models from 2009–2022.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the ball joints need grease before installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: New ball joints are pre-greased and typically do not require extra grease within the first year.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584960495801,"sku":"B08P4C3YYH","price":555.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-front-packaging-ram1500-upper-control-arms.jpg?v=1790461111"},{"product_id":"ksp-performance-adjustable-2-4-front-upper-control-arms-for-tacoma-hilux-fortuner-steel-tubular-pu-bushings","title":"KSP PERFORMANCE Adjustable 2-4\" Front Upper Control Arms for Tacoma\/Hilux\/Fortuner — Steel Tubular, PU Bushings","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE adjustable 2–4\" front upper control arms are steel tubular replacement A-arms engineered to improve caster, suspension geometry, and wheel clearance for Tacoma, Hilux, Fortuner and Prerunner models from 2004–2023.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese adjustable upper control arms are built from 1.25\" DOM steel tubing with polyurethane bushings and upgraded ball joints to deliver greater strength, corrosion resistance, and longer service life than many OE arms. They let you fine-tune front-end alignment after a lift, reduce bump steer, and maintain proper tire contact angle under travel—without changing factory lower arms. Powder-coating, KSP dust covers, and robust tower boots help the arms withstand off-road conditions and extend maintenance intervals.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adjustable UCAs help after installing a lift?\u003c\/h3\u003e\n\u003cp\u003eInstalling a 2–4\" lift changes caster and pinion angle; adjustable upper control arms compensate for that shift and restore correct wheel alignment. Fine adjustment reduces steering pull and excessive tire wear, and helps keep the suspension geometry within recommended ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable length to correct caster after 2–4\" lifts\u003c\/li\u003e\n  \u003cli\u003eMaintains proper tire contact patch and reduces uneven wear\u003c\/li\u003e\n  \u003cli\u003eCompatible with Tacoma, Hilux, Fortuner and select Prerunner models\u003c\/li\u003e\n  \u003cli\u003eWorks with existing lower control arms—no full suspension swap required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes KSP PERFORMANCE arms more durable than stock parts?\u003c\/h3\u003e\n\u003cp\u003eKSP uses 1.25\" DOM tubing for the main structure, offering higher tensile strength and more predictable failure modes than stamped or thin-walled arms. Polyurethane bushings resist temperature extremes and tearing, while powder coating and protective dust covers reduce corrosion and contamination of the ball joint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25\" DOM tubular construction for improved strength\u003c\/li\u003e\n  \u003cli\u003ePU bushings to withstand heat and repeated articulation\u003c\/li\u003e\n  \u003cli\u003eKSP dust cover and sealed tower boot to keep out mud and sand\u003c\/li\u003e\n  \u003cli\u003eHeat-treated ball pin and clear threads to limit cracking and corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and regular maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard UCA replacement procedures and fits both left and right sides. New ball joints are pre-greased and don’t require added grease within the first year; future servicing uses the zerk fitting—tighten carefully to avoid damaging the copper zerk.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-on replacement for specified vehicle years and trims\u003c\/li\u003e\n  \u003cli\u003ePre-filled ball joints—no grease needed in the first 12 months\u003c\/li\u003e\n  \u003cli\u003eZerk fitting for periodic greasing; avoid overtightening\u003c\/li\u003e\n  \u003cli\u003eLeft and right arms included for complete front-end upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these arms fit my specific Tacoma, Hilux, or Fortuner?\u003c\/h3\u003e\n\u003cp\u003eFitment covers many model years but has exclusions—double-check your drivetrain and model type before ordering. These arms fit Tacoma 2nd (2004–2015) and Tacoma 3rd N300 (2015–2023) when the vehicle is a prerunner or appropriate 4x4 configuration; they also fit Hilux and Fortuner generations listed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Tacoma 2nd 2004–2015 and Tacoma 3rd N300 2015–2023 (prerunner exceptions apply)\u003c\/li\u003e\n  \u003cli\u003eCompatible with Prerunner 2005–2023\u003c\/li\u003e\n  \u003cli\u003eFits Hilux 7th AN10\/20\/30 (2004–2015) and Hilux 8th AN120\/130 (2015–2021)\u003c\/li\u003e\n  \u003cli\u003eFits Fortuner 2004–2021; does not fit Tacoma 2WD 2004–2015 (except prerunner)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Off-roaders, weekend explorers, and anyone lifting a Toyota Tacoma, Hilux, Fortuner or building a prerunner who needs stronger, adjustable front geometry components. Choose KSP PERFORMANCE arms if you want a steel tubular upgrade with sealed ball joints, polyurethane bushings, and straightforward adjustment options—backed by a 12-month ball-joint replacement promise and 30-day refund or free replacement part policy for longer returns.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these UCAs require extra grease after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: New ball joints are pre-greased and don’t need extra grease within the first year; thereafter use the zerk fitting, tightening carefully.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit a 2006 Tacoma 2WD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They do not fit Tacoma 2WD 2004–2015 except if the truck is a prerunner; verify your drivetrain and model before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584978813113,"sku":"B095YQTTMY","price":492.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-front-packaging-upper-control-arm.jpg?v=1790461893"},{"product_id":"ksp-performance-adjustable-upper-control-arms-for-toyota-tacoma-4runner-1995-2003-2-4-lift-greaseable-flexible-ball-joint","title":"KSP PERFORMANCE Adjustable Upper Control Arms for Toyota Tacoma \/ 4Runner 1995–2003 — 2–4\" Lift, Greaseable Flexible Ball Joint","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE adjustable upper control arms replace the stock fixed arms to restore alignment and suspension geometry after 2–4\" lifts on 1995–2003 Toyota Tacoma, Prerunner, and 1995–2002 4Runner N180 trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese aftermarket upper control arms are engineered to correct caster and camber when a vehicle is lifted, using a greaseable flexible ball joint, polyurethane bushings, and a powder-coated, CNC-machined steel construction. They provide a direct-fit replacement for the factory arms on compatible model years and include features meant to resist corrosion, simplify installation, and prolong service life in off-road and daily-driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these arms restore proper alignment after a lift?\u003c\/h3\u003e\n\u003cp\u003eRaising the chassis changes suspension geometry, often pushing caster and camber out of factory specifications. These adjustable arms let you re-establish proper wheel angle and steering return by offering measurable length and joint movement adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable length lets you dial in caster and camber corrections.\u003c\/li\u003e\n  \u003cli\u003eGreaseable flexible ball joint allows on-vehicle lubrication to flush contaminants.\u003c\/li\u003e\n  \u003cli\u003eThick cold-drawn steel tubing keeps the arm straight under load.\u003c\/li\u003e\n  \u003cli\u003eDom-tube design prevents fitment issues common after lifts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and processes improve durability and corrosion resistance?\u003c\/h3\u003e\n\u003cp\u003eThe arms use CNC-machined components and high-frequency heat-treated alloy steel ball pins for strength where it matters most. A powder-coated finish protects the assembly from rust and environmental wear encountered during off-road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePowder-coat finish resists chips and corrosion.\u003c\/li\u003e\n  \u003cli\u003eCNC machining ensures consistent bore and pipe diameter for fitment.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated ball pin increases fatigue life under stress.\u003c\/li\u003e\n  \u003cli\u003ePU bushings tolerate temperature swings and reduce noise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the flexible, greaseable ball joint benefit maintenance and performance?\u003c\/h3\u003e\n\u003cp\u003eThe pre-installed flexible ball joint improves articulation compared with fixed joints, and the greaseable design lets you service the socket to remove contaminants and add lubrication for longevity. A protective dust boot is included to limit abrasive wear in dirty environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGrease zerk lets technicians flush old grease and add fresh lubricant.\u003c\/li\u003e\n  \u003cli\u003eDust boot shields the joint from dirt and moisture.\u003c\/li\u003e\n  \u003cli\u003eHex hole on the ball pin facilitates easy torqueing during installation.\u003c\/li\u003e\n  \u003cli\u003eNew ball joints typically do not require extra grease within the first year.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know before installation and ongoing care?\u003c\/h3\u003e\n\u003cp\u003eConfirm your vehicle year, make and model match the listed fitment to ensure compatibility. Follow recommended tightening practices for the zerk and avoid excessive force during service to prevent damage to the copper fitting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: 1996–2003 Tacoma 4x4, 1996–2004 Prerunner 4x2, 1995–2002 4Runner N180 4x4.\u003c\/li\u003e\n  \u003cli\u003eTighten grease zerk after refilling; avoid over-torquing the fitting.\u003c\/li\u003e\n  \u003cli\u003eInitial ball joint lubrication not required within first year in most conditions.\u003c\/li\u003e\n  \u003cli\u003eRecheck alignment after installation to restore steering and tire wear characteristics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This product is aimed at Toyota owners upgrading suspension height by 2–4 inches who need a reliable, adjustable front upper control arm to recover factory-like steering geometry. It suits off-road enthusiasts, weekend modifiers, and technicians seeking an OEM-replacement-style arm with improved serviceability and corrosion protection. KSP PERFORMANCE includes a 30-day refund and 12-month replacement support—confirm vehicle compatibility before purchase for the best result.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these arms fit my 2001 Toyota Tacoma with a 3\" lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these arms are designed for 1996–2003 Tacoma 4x4 and correct geometry for 2–4\" lifts; confirm your model and drivetrain before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the ball joints require greasing right away?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: New ball joints typically don’t need additional grease within the first year; use the grease zerk later to flush contaminants as needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584978878649,"sku":"B0BN7SKXL3","price":544.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-front-assembly-overview.jpg?v=1790461894"},{"product_id":"hhcm-lower-control-arm-kit-for-toyota-highlander-2008-2019-right-left-pre-assembled-ball-joints-oem-fit","title":"HHCM Lower Control Arm Kit for Toyota Highlander 2008–2019 — Right + Left Pre‑assembled Ball Joints, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eHHCM lower front control arm kit (K622944 right + K622945 left) is a direct-replacement suspension assembly built to restore steering stability and ride geometry for Toyota Highlander 2008–2019 and several Lexus models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premium control-arm pair combines a forged arm with a pressed-in ball joint and factory-style bushings to recreate original suspension geometry. Designed and tested to meet international OEM tolerances, the kit aims to replace worn or damaged lower control arms with a ready-to-install assembly that reduces play, improves alignment repeatability, and simplifies fitment.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these control arms fit?\u003c\/h3\u003e\n\u003cp\u003eThe HHCM K622944 (right) and K622945 (left) lower control arms are manufactured to fit a range of Toyota and Lexus models that share the same front suspension design. Confirm the part numbers and model years before purchasing to ensure cross-compatibility with your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eToyota Highlander: 2008–2019\u003c\/li\u003e\n  \u003cli\u003eToyota Venza: 2009–2015\u003c\/li\u003e\n  \u003cli\u003eLexus RX350: 2010–2022 (2010–2012 where coil option applies)\u003c\/li\u003e\n  \u003cli\u003eLexus RX350L \u0026amp; RX450h\/RX450hL: select years listed (check coil vs. air variants)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit simplify installation and alignment?\u003c\/h3\u003e\n\u003cp\u003eEach arm arrives as a complete lower control arm with the ball joint already installed and bushings pressed in, so you avoid separate component assembly. Precision manufacturing helps the arms locate correctly in the suspension mounts, making alignment adjustments more predictable after fitting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled ball joints and bushings for direct swap\u003c\/li\u003e\n  \u003cli\u003eOEM-style mount points to reduce fitment rework\u003c\/li\u003e\n  \u003cli\u003eDimensions produced to factory tolerances for consistent alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and quality checks are used?\u003c\/h3\u003e\n\u003cp\u003eHHCM builds these control arms from high-strength materials selected to withstand road loads and corrosion exposure. Parts are produced under long-standing manufacturing practices with multiple inspections to match original equipment standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened metal arm body with corrosion-resistant finish\u003c\/li\u003e\n  \u003cli\u003eDurable rubber or elastomer bushings to control noise and vibration\u003c\/li\u003e\n  \u003cli\u003ePre-pressed ball joint rated for suspension articulation and wear resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and aftercare support does HHCM provide?\u003c\/h3\u003e\n\u003cp\u003eThe kit is backed by a limited 12-month warranty, and HHCM offers customer support for fitment or product questions. If you encounter issues, contact the seller with vehicle details and part numbers to expedite service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty from HHCM\u003c\/li\u003e\n  \u003cli\u003eCustomer support for compatibility or installation inquiries\u003c\/li\u003e\n  \u003cli\u003eSold as a two-piece kit: one right (K622944) and one left (K622945)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: Drivers and technicians replacing worn lower front control arms on compatible Toyota Highlander, Venza, or Lexus RX models who want a factory-dimension replacement with pre-assembled ball joints to speed installation. It’s suited for owners restoring steering precision and alignment reliability without modifying the vehicle’s original suspension geometry.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both left and right control arms?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains one right K622944 and one left K622945 lower control arm with ball joints.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit a Lexus RX350 from 2011?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are compatible with many RX350 years including 2010–2012 coil-equipped models; verify your suspension type before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HHCM","offers":[{"title":"Default Title","offer_id":67585014726841,"sku":"B0DH235LGP","price":234.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/hhcm-front-packaging-control-arm-kit.jpg?v=1790463490"},{"product_id":"aeagle-front-suspension-8-piece-kit-for-nissan-rogue-2008-2013-select-2014-2015-control-arms-tie-rods-sway-bar-links","title":"Aeagle Front Suspension 8‑Piece Kit for Nissan Rogue 2008–2013 \u0026 Select 2014–2015 — Control Arms, Tie Rods \u0026 Sway Bar Links","description":"\u003cp\u003e\u003cstrong\u003eAeagle’s 8-piece front suspension kit replaces the front lower control arms, inner and outer tie rod ends, and sway bar end links for Nissan Rogue 2008–2013 and Rogue Select 2014–2015.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete front suspension kit bundles driver and passenger lower control arm assemblies (MS30194 \u0026amp; MS30195) with inner and outer tie rod ends and front stabilizer sway bar end links, assembled to restore steering geometry and reduce unwanted road feedback. Each component is selected to match OE mounting points and fitment for the specified Nissan models. The kit is backed by a 12-month warranty and is tested prior to shipping to ensure the parts arrive ready for installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit change my Rogue’s handling?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn control arms, tie rod ends, and sway bar links tightens steering response and can reduce play or wandering at the front end. You’ll likely notice more consistent wheel alignment and improved feedback from the road surface without oversteering or looseness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct suspension geometry for predictable steering.\u003c\/li\u003e\n  \u003cli\u003eLimits lateral movement caused by worn ball joints and links.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain tire contact patch for even wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly is included in this 8-piece suspension set?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains all front-left and front-right components required to refresh the front steering and lower control arm assemblies. Parts are labeled for driver and passenger sides so you can replace matching pairs rather than mixing old and new hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Front Lower Control Arm Assembly – Driver Side (MS30194, RK621452)\u003c\/li\u003e\n  \u003cli\u003e1x Front Lower Control Arm Assembly – Passenger Side (MS30195, RK621453)\u003c\/li\u003e\n  \u003cli\u003e2x Inner Tie Rod Ends (EV800550)\u003c\/li\u003e\n  \u003cli\u003e1x Outer Tie Rod End Driver (ES800583) and 1x Outer Tie Rod End Passenger (ES800582)\u003c\/li\u003e\n  \u003cli\u003e1x Front Stabilizer Sway Bar End Link Driver (K750095) and 1x Passenger (K750094)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is moderate in difficulty and typically requires basic suspension tools, a torque wrench, and alignment afterward. If you have experience with front-end repairs, the swap can be done in a home garage; otherwise a professional install ensures proper torque and alignment settings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExpect to torque control arm and tie rod fasteners to manufacturer specs.\u003c\/li\u003e\n  \u003cli\u003eAn alignment is recommended after installation for best tire life and handling.\u003c\/li\u003e\n  \u003cli\u003eSome shops offer package pricing for parts plus alignment and labor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these parts compatible with my vehicle years and models?\u003c\/h3\u003e\n\u003cp\u003eThese components are designed for Nissan Rogue model years 2008–2013 and the Rogue Select for 2014–2015. Fitment aligns with original mounting points but verify part numbers against your vehicle’s VIN or current components to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Nissan Rogue 2008–2013.\u003c\/li\u003e\n  \u003cli\u003eCompatible: Nissan Rogue Select 2014–2015.\u003c\/li\u003e\n  \u003cli\u003eCheck current part numbers or VIN for full confirmation before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Aeagle 8-piece front suspension kit is intended for Nissan Rogue owners, DIY mechanics, and repair shops seeking a coordinated set of front lower control arms, tie rod ends, and sway bar end links to restore steering precision and reduce road feedback. Choose this kit if you want matched components for both driver and passenger sides, a straightforward parts list for front-end work, and a 12-month tested warranty for peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these parts fit my 2012 Nissan Rogue?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This kit is compatible with Nissan Rogue model years 2008–2013 and Rogue Select 2014–2015. Verify with your VIN if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a wheel alignment after installing this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A wheel alignment is recommended after replacing control arms or tie rod ends to ensure correct steering geometry and even tire wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Aeagle","offers":[{"title":"Default Title","offer_id":67585019904185,"sku":"B0CKWSHG1H","price":255.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/aeagle-front-lower-control-arms-front-view.jpg?v=1790463649"},{"product_id":"ksp-performance-upper-control-arms-for-silverado-sierra-2500hd-3500hd-2-4in-lift-adjustable-tubular-pair-black","title":"KSP PERFORMANCE Upper Control Arms for Silverado\/Sierra 2500HD 3500HD 2-4in Lift — Adjustable Tubular Pair (Black)","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE adjustable tubular upper control arms replace factory arms to restore steering geometry after a 2–4\" lift on 2011–2019 Chevrolet Silverado\/Sierra 2500HD and 3500HD 8-lug trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement upper A-arms are engineered for lifted heavy-duty Chevys and GMs, providing a stronger, adjustable connection between the spindle and frame. Constructed from CNC-machined tubing with TIG welds, polyurethane bushings, and sealed ball joints, the arms allow alignment correction and improved durability compared with stock components after a 2–4 inch suspension lift. They ship as a pair and are finished in a two-layer black coating for corrosion resistance and a finished appearance.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these arms fix alignment after a 2–4\" lift?\u003c\/h3\u003e\n\u003cp\u003eThe adjustable length lets you correct caster and camber changes caused by lift kits, bringing suspension geometry back into proper range without expensive custom modifications. Adjustment is straightforward and enables fine-tuning for on-road stability or mild off-road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable threaded sleeve for precise alignment adjustments\u003c\/li\u003e\n  \u003cli\u003ePre-sealed ball joint maintains articulation and protects internals\u003c\/li\u003e\n  \u003cli\u003eDesigned to match 2011–2019 Silverado\/Sierra 2500HD \u0026amp; 3500HD 8-lug mounting points\u003c\/li\u003e\n  \u003cli\u003eSold as a pair for front axle symmetry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and manufacturing processes improve strength and longevity?\u003c\/h3\u003e\n\u003cp\u003eKSP PERFORMANCE uses CNC machining for consistent tube diameters and TIG welding to create reinforced, fatigue-resistant joints. Polyurethane bushings and a long-life dust cover extend service life compared with softer factory rubber components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined tubing for uniform wall thickness and fit\u003c\/li\u003e\n  \u003cli\u003eTIG welds provide stronger, more reliable seams than MIG alternatives\u003c\/li\u003e\n  \u003cli\u003eDouble-layer black finish resists rust and abrasion\u003c\/li\u003e\n  \u003cli\u003ePU bushings and extended dust covers reduce wear under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain these upper control arms for best performance?\u003c\/h3\u003e\n\u003cp\u003eRoutine visual inspection and correct greasing keep joints operating smoothly. New ball joints are factory-lubed and typically do not require additional grease for the first year; when greasing, avoid overtightening the zerk to prevent damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck zerk fitting orientation and tighten by hand; do not over-torque\u003c\/li\u003e\n  \u003cli\u003eInspect dust covers and bushings for tears or excessive wear periodically\u003c\/li\u003e\n  \u003cli\u003eReplace arms in pairs for balanced steering response\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs and alignment shop setup after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these control arms fit my truck?\u003c\/h3\u003e\n\u003cp\u003eThey are designed specifically for 2011–2019 Chevrolet Silverado 2500HD\/3500HD and 2011–2019 GMC Sierra 2500HD\/3500HD with 8-lug hubs, for both 2WD and 4WD models. Confirm year, make, model and hub lug count before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: 2011–2019 Chevy Silverado 2500HD\/3500HD (8-lug only)\u003c\/li\u003e\n  \u003cli\u003eFitment: 2011–2019 GMC Sierra 2500HD\/3500HD (8-lug only)\u003c\/li\u003e\n  \u003cli\u003eDesigned for trucks lifted 2–4 inches\u003c\/li\u003e\n  \u003cli\u003eSold as a package of two upper control arms in black finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These KSP PERFORMANCE adjustable upper control arms are aimed at owners of lifted Chevy\/GMC 2500HD and 3500HD trucks who need precise alignment correction, stronger front-end components, and extended service life compared with stock arms. They suit weekend off-roaders, fleet mechanics upgrading suspension geometry after a lift, and anyone wanting a robust aftermarket replacement that’s ready for street or light off-road use. KSP provides a 30-day refund and 12-month free replacement support—confirm vehicle compatibility before purchase and contact KSP for installation or fitment questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these arms require modification to install on a 2015 Silverado 2500HD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modifications are usually needed for 8-lug 2011–2019 Silverado\/Sierra trucks; they bolt into the factory mounting points. Confirm lug count and model year first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I grease the new ball joints right away?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: New ball joints are pre-lubricated and typically don't need extra grease for the first year; avoid over-tightening the zerk.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67585028522169,"sku":"B0B9MVWRCC","price":580.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-front-installed-silverado-2500hd.jpg?v=1790464075"},{"product_id":"ksp-performance-upper-control-arms-for-2007-2018-gm-6-lug-trucks-2-4-inch-lift-1-25-inch-dom-tubular-with-pu-bushings","title":"KSP PERFORMANCE Upper Control Arms for 2007–2018 GM 6-Lug Trucks — 2-4 inch Lift, 1.25 inch DOM Tubular with PU Bushings","description":"\u003cstrong\u003eKSP PERFORMANCE upper control arms replace factory cast arms to provide a reliable 2–4\" lift solution for 2007–2018 GM 1500-series 6-lug trucks and SUVs.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned for 6-lug wheel applications on select Chevy, GMC and Cadillac 1500 models, these replacement upper control arms combine a tubular 1.25\" DOM construction with upgraded polyurethane bushings and a reinforced TIG-welded ball joint assembly. The package targets drivers who need correct fitment after a lift or who want a stronger OE cast-arm alternative without dramatically changing steering geometry. The update version 5.0 adds longevity features like a longer-life dust cover and a red textured finish for corrosion resistance and visual appeal.\u003c\/p\u003e\n\n\u003ch3\u003eWill these upper control arms fit my 2007–2018 GM 6-lug truck?\u003c\/h3\u003e\n\u003cp\u003eFitment is specific to 6-lug wheel hubs and certain OE forged\/cast steel factory arms. They are made for 2007–2014 Yukon\/Yukon XL, 2007–2014 Sierra\/Avalanche\/Tahoe\/Suburban\/Silverado 1500, and 2014–2018 Sierra and 2007–2014 Cadillac Escalade models listed with 2WD or 4WD. Confirm your vehicle uses the OE forged\/cast arm style before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: 2007–2014 Yukon\/Yukon XL 1500, 2007–2014 Avalanche\/Tahoe\/Suburban\/Sierra\/Silverado 1500\u003c\/li\u003e\n  \u003cli\u003eAlso fits 2014–2018 Sierra 1500 New Body and 2007–2014 Cadillac Escalade\u003c\/li\u003e\n  \u003cli\u003eOnly for 6-lug wheel hubs and OE forged\/cast steel arm configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these control arms improve strength and durability?\u003c\/h3\u003e\n\u003cp\u003eThe arms use 1.25\" DOM tubular steel for structural strength and TIG welding to reinforce joints more consistently than typical MIG-welded assemblies. A CNC-machined ball joint and thicker dust cover resist wear, while the red textured finish helps prevent corrosion after installation. The PU bushings increase responsiveness and reduce compliance compared with stock rubber bushings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25\" DOM tubing for superior load-bearing capacity\u003c\/li\u003e\n  \u003cli\u003eTIG-welded seams for stronger, more consistent welds\u003c\/li\u003e\n  \u003cli\u003eCNC-machined ball joint with extended dust cover for longevity\u003c\/li\u003e\n  \u003cli\u003ePolyurethane bushings for improved handling and life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance notes should I know?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard upper control arm replacement procedures but requires attention to the ball joint zerk fitting: tighten the zerk gently after greasing and avoid overtightening to prevent damage. New ball joints typically do not require additional grease within the first year. Always realign the vehicle after installation to preserve tire life and steering behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use excessive force when tightening the zerk grease fitting\u003c\/li\u003e\n  \u003cli\u003eNew ball joint generally needs no extra grease for the first year\u003c\/li\u003e\n  \u003cli\u003eWheel alignment required after installation\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific torque specs for fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and after-sales support does KSP PERFORMANCE provide?\u003c\/h3\u003e\n\u003cp\u003eKSP PERFORMANCE backs this part with a 12-month free ball-joint replacement and customer service support. They also offer a 30-day refund policy and free replacement parts if issues arise after the first month. For any installation questions or fitment concerns, contact KSP customer support before modifying other suspension components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month ball joint free-replacement coverage\u003c\/li\u003e\n  \u003cli\u003e30-day refund policy; free replacement parts after one month if needed\u003c\/li\u003e\n  \u003cli\u003eDedicated after-sales contact for fitment and installation issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers of GM 1500-series 6-lug trucks and SUVs who need a durable, direct-fit upper control arm option after installing a 2–4\" lift or replacing a worn OE cast arm. This product suits owners who value reinforced construction, upgraded bushings, and manufacturer support for a confident long-term repair or upgrade.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this arm fit 5-lug trucks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, these control arms are designed specifically for 6-lug wheel hubs and will not fit 5-lug configurations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to grease the ball joint before installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: New ball joints generally don't need extra grease within the first year; if you do add grease, tighten the zerk gently.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67585028587705,"sku":"B09HZWSBFZ","price":482.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-front-packed-control-arm.jpg?v=1790464076"},{"product_id":"ksp-performance-front-upper-control-arms-chevy-silverado-1500-2019-2026-2-4-adjustable-3-ball-joints","title":"KSP PERFORMANCE Front Upper Control Arms Chevy Silverado 1500 2019-2026 2-4\" Adjustable, 3 Ball Joints","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE front upper control arms are a 2-4\" adjustable aftermarket suspension upgrade for 2019–2026 Chevy Silverado 1500 and 2019+ GMC Sierra 1500 trucks, offering stronger alloy construction, new ball joints, and improved alignment geometry.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese front upper control arms replace the factory arms to restore proper caster and camber after a lift and to give heavier-duty strength for off-road use. Built from CNC-machined, high-frequency heat-treated alloy steel with TIG welds and durable rubber bushings, they are engineered to handle lifted suspensions while maintaining a factory-like steering feel. The assembled kit includes three ball-joint-ready arms and is powder-coated to resist corrosion.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adjustable control arms affect alignment and handling?\u003c\/h3\u003e\n\u003cp\u003eAdjustability lets you correct caster and camber changes caused by a 2–4\" lift so steering response and tire wear remain predictable. Precise spherical joint angles are created to mimic or improve factory geometry while allowing technicians to dial in alignment without bending stock components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrects caster\/camber for lifted applications.\u003c\/li\u003e\n  \u003cli\u003ePrevents uneven tire wear through proper geometry.\u003c\/li\u003e\n  \u003cli\u003eMaintains predictable steering feel with OEM-like bushings.\u003c\/li\u003e\n  \u003cli\u003eIncludes adaptive ride control bracket for plug-and-play fit in many trims.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these control arms strong enough for off-road and heavier-duty use?\u003c\/h3\u003e\n\u003cp\u003eYes — the arms are made from thickened alloy tubing with CNC-machined fittings and high-frequency heat treatment on the ball pin for improved shear strength. TIG welding and a corrosion-resistant powder coat extend longevity when subjected to rugged driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel tubing optimized to resist bending and fatigue.\u003c\/li\u003e\n  \u003cli\u003eHigh-frequency heat-treated ball pins for increased durability.\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty TIG welds and professional powder coat finish.\u003c\/li\u003e\n  \u003cli\u003eSuperior rubber bushings keep ride comfort similar to OEM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I need to know about installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThese arms are designed for relatively straightforward installation, and the kit accepts new ball joints that are pre-lubricated for up to one year. Some models—especially Trail Boss, AT4, or AT4X—require 1.5–2\" of lift for proper fit; the adaptive ride control bracket often installs without cutting, but axle tube separation may be needed during assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFit requires 2019+ Silverado 1500 or 2019+ Sierra 1500; check trim compatibility.\u003c\/li\u003e\n  \u003cli\u003eNew ball joints are greased; no extra grease needed within the first year.\u003c\/li\u003e\n  \u003cli\u003eMay need axle tube separation during installation for access.\u003c\/li\u003e\n  \u003cli\u003eIncludes adjustable ends for final alignment adjustments after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these arms fit my lifted Trail Boss, AT4, or AT4X model?\u003c\/h3\u003e\n\u003cp\u003eThey are compatible with those trims when the truck already has roughly 1.5–2\" of lift; the arms themselves are optimized for overall 2–4\" lift ranges. Always confirm year\/make\/model and existing suspension setup before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports setups lifted between 2–4\" for proper geometry.\u003c\/li\u003e\n  \u003cli\u003eTrail Boss\/AT4\/AT4X typically require 1.5–2\" pre-lift for fitment.\u003c\/li\u003e\n  \u003cli\u003eAdaptive bracket reduces modification on many factory systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These KSP PERFORMANCE front upper control arms are aimed at Silverado and Sierra owners upgrading suspension height or durability — especially drivers who install 2–4\" lifts, those who hit rough roads or trails, and technicians needing adjustable arms to tune caster and camber. If you want stronger, adjustable front geometry with OEM-like bushings and corrosion protection, this kit provides a direct aftermarket replacement designed to extend service life while keeping predictable handling.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these control arms fit a 2019 Chevy Silverado 1500 with a 3\" lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These KSP arms support 2–4\" lifts; confirm trim compatibility and existing lift components before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the new ball joints need grease after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No extra grease is required for the first year; check joints periodically and follow normal maintenance thereafter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67585040646329,"sku":"B0D1BKND8H","price":538.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-front-upper-control-arms-overview.jpg?v=1790464734"},{"product_id":"ksp-performance-upper-control-arms-for-silverado-sierra-1500-2007-2018-6-lug-stage-2-0-tubular-1-25-dom-red-for-2-4-lift","title":"KSP PERFORMANCE Upper Control Arms for Silverado\/Sierra 1500 (2007–2018, 6-Lug) — Stage 2.0 Tubular 1.25\" DOM Red for 2–4\" Lift","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE Stage 2.0 tubular upper control arms replace OE stamped steel and aluminum arms to provide a stronger, more durable front suspension for 2007–2018 Silverado\/Sierra 1500 (6-lug) with a 2–4\" lift.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese aftermarket upper control arms are engineered for owners who want improved strength, refined steering geometry, and a factory-like fit when upgrading to a 2–4\" suspension lift on 2007–2018 Chevrolet and GMC 1500 platforms. Constructed from 1.25\" DOM tubing with MIG welding and a revised Stage 3.0 update—featuring polyurethane bushings, extended dust covers, CNC-machined surfaces, and a red textured finish—this kit aims to blend durability, appearance, and serviceability.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms improve front-end strength and durability?\u003c\/h3\u003e\n\u003cp\u003eThe KSP tubular arms use 1.25\" DOM tubing and reinforced MIG welding to produce a stiffer, more damage-resistant assembly than many stock stamped or cast arms. That greater rigidity reduces flex under load and helps maintain wheel alignment when driving off-road or carrying heavy payloads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25\" DOM tubing for increased structural strength\u003c\/li\u003e\n  \u003cli\u003eMIG welding reinforcement for consistent joint integrity\u003c\/li\u003e\n  \u003cli\u003eStage 3.0 updates reduce wear with longer dust covers and PU bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and lift height?\u003c\/h3\u003e\n\u003cp\u003eThese upper control arms are specifically designed for 6-lug 2007–2018 Yukon, Yukon XL 1500, Sierra 1500, Avalanche 1500, Tahoe, Suburban 1500, Silverado 1500, and select Escalade models. They are intended for vehicles with a 2–4\" front lift and are compatible with both 2WD and 4WD configurations on the listed years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: 6-lug wheel models only (2007–2018 specified vehicles)\u003c\/li\u003e\n  \u003cli\u003eDesigned for 2–4\" lift applications without major geometry changes\u003c\/li\u003e\n  \u003cli\u003eWorks with OE stamped steel and aluminum arm replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and installation details should I know?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard suspension replacement practices but requires attention to lubrication and fastener torque. The kit includes zerk fittings; tighten them gently after greasing, and avoid over-torquing to prevent damage. New ball joints typically do not require additional grease for the first year.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not apply excessive force when tightening zerks to avoid breakage\u003c\/li\u003e\n  \u003cli\u003eNew ball joint: no extra grease needed within the first year\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle alignment after installation to restore correct steering geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and after-sales support does KSP PERFORMANCE provide?\u003c\/h3\u003e\n\u003cp\u003eKSP includes a 12-month replacement guarantee for the ball joint and offers solid after-sales support. The brand also provides a 30-day refund window and free replacement parts beyond the first month if issues arise during use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month free ball joint replacement\u003c\/li\u003e\n  \u003cli\u003e30-day refund policy; free replacement parts afterward as described\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment or service questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: KSP PERFORMANCE Stage 2.0 tubular upper control arms are aimed at Silverado\/Sierra 1500 owners and technicians upgrading to a 2–4\" lift who want stronger, longer-lasting suspension components than stock arms provide. They suit drivers who tow or haul frequently, run rough roads, or desire a more aggressive look with CNC-machined surfaces and red textured finish—while keeping maintenance straightforward with factory-style fitment and greasable joints.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit 2007–2018 Silverado 1500 with 6-lug wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits 6-lug 2007–2018 Silverado\/Sierra 1500 models for 2–4\" lift applications in 2WD and 4WD.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to grease the new ball joints right away?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. New ball joints generally do not require extra grease within the first year; follow zerk tightening guidance when servicing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67585040744633,"sku":"B087CJWCJJ","price":519.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-front-arm-assembly.jpg?v=1790464735"},{"product_id":"gymmeds-front-upper-control-arm-ball-joint-kit-for-2007-2014-chevy-gmc-cadillac-forged-steel-corrosion-resistant-left-righ","title":"GYMMEDS Front Upper Control Arm \u0026 Ball Joint Kit for 2007–2014 Chevy\/GMC\/Cadillac — Forged Steel, Corrosion‑Resistant (Left \u0026 Righ","description":"\u003cp\u003e\u003cstrong\u003eGYMMEDS front upper left and right control arm kit with ball joints and related suspension components restores factory steering feel and stability for 2007–2014 GM 1500 trucks and full‑size SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete suspension kit is engineered to replace worn upper control arms and ball joints on compatible Chevrolet, GMC and Cadillac models, including Silverado, Sierra 1500, Avalanche, Tahoe, Suburban, Yukon and Escalade. Forged steel construction, corrosion-resistant coating and a full assortment of related front-end parts make this a practical option when steering has become loose, ride quality suffers, or uneven tire wear appears. The package is built to match OE mounting points so installation uses existing vehicle attachment locations.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and years does this GYMMEDS kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit fits a range of GM full-size trucks and SUVs. Confirm the fit with your vehicle year, model, and whether your original parts are steel control arms before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2007–2013 Chevrolet Avalanche and Silverado 1500\u003c\/li\u003e\n  \u003cli\u003e2007–2014 Chevrolet Tahoe and Suburban 1500\u003c\/li\u003e\n  \u003cli\u003e2007–2014 GMC Yukon and 2007–2013 GMC Sierra 1500\u003c\/li\u003e\n  \u003cli\u003e2007–2014 Cadillac Escalade (including ESV) and 2007–2013 Escalade EXT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included in the kit and why it matters?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies both upper control arms and ball joints plus commonly replaced front-end components so you can address several wear items at once. That reduces repeated labor and ensures compatible parts work together to restore alignment and handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Front upper control arm \u0026amp; ball joint, driver side (K80669)\u003c\/li\u003e\n  \u003cli\u003e1x Front upper control arm \u0026amp; ball joint, passenger side (K80670)\u003c\/li\u003e\n  \u003cli\u003e2x Front sway bar end links (K700432)\u003c\/li\u003e\n  \u003cli\u003e2x Front lower ball joints (K6541)\u003c\/li\u003e\n  \u003cli\u003e2x Front inner tie rod ends (Ev800084)\u003c\/li\u003e\n  \u003cli\u003e2x Front outer tie rod ends (Es800223)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these control arms constructed and what durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eGYMMEDS uses forged steel components and a protective surface coating to resist corrosion and handle heavy loads. The materials and finish are chosen to meet the demands of load transfer and steering forces common in full-size trucks and SUVs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged steel arms for increased strength under stress\u003c\/li\u003e\n  \u003cli\u003eProtective coating to limit rust and extend service life\u003c\/li\u003e\n  \u003cli\u003ePre-assembled ball joints on upper arms for simplified installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installing this kit improve driving feel and tire wear?\u003c\/h3\u003e\n\u003cp\u003eReplacing degraded control arms, ball joints and related tie rod ends typically tightens steering response and reduces wandering or vibration. Restoring those components helps return factory geometry, which can result in more even tire wear and improved confidence at highway speeds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharper steering feedback and reduced free play\u003c\/li\u003e\n  \u003cli\u003eSmoother ride over uneven surfaces\u003c\/li\u003e\n  \u003cli\u003eReduced irregular tire wear when aligned after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This GYMMEDS kit is intended for owners or technicians working on 2007–2014 GM 1500 trucks and large SUVs who need a comprehensive front-end replacement. It’s best for vehicles showing steering looseness, clunking from worn joints, or uneven tire wear, and for buyers who prefer replacing upper control arms plus related components in a single, coordinated set. Always verify fitment against your exact model year and original control arm material before purchase, and plan a professional alignment after installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my Silverado 1500 from 2010?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this kit covers 2007–2013 Silverado 1500 models, but confirm your original control arms are steel using the fitment tool before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an alignment after installing these parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A professional wheel alignment is recommended to restore proper steering geometry and prevent uneven tire wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GYMMEDS","offers":[{"title":"Default Title","offer_id":67585044119737,"sku":"B0DRG7CZB8","price":269.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gymmeds-front-upper-control-arms-pair.jpg?v=1790464905"},{"product_id":"scitoo-front-suspension-kit-10-piece-for-chevy-gmc-trucks-2007-2014-upper-control-arms-tie-rods","title":"SCITOO Front Suspension Kit 10-Piece for Chevy\/GMC Trucks 2007–2014 — Upper Control Arms \u0026 Tie Rods","description":"\u003cstrong\u003eA complete 10-piece front suspension kit from SCITOO replaces upper control arms, tie rod ends, sway bar links and lower ball joints to restore steering precision on compatible GM trucks and SUVs.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Silverado, Tahoe, Suburban, Sierra, Yukon or Escalade (model years listed) shows steering play, uneven tire wear or looseness over bumps, a matched front suspension kit can bring back crisp handling and predictable response. This SCITOO kit bundles the most commonly worn front steering and suspension components so you replace related parts together and avoid repeating labor later.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included and why are they grouped?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains two upper control arms with preinstalled ball joints, inner and outer tie rod ends, two lower ball joints and two sway bar end links—ten pieces total. Replacing these together addresses both steering linkage wear and the primary pivot points that affect alignment and ride quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eK80669 front upper control arm and ball joint – driver side\u003c\/li\u003e\n  \u003cli\u003eK80670 front upper control arm and ball joint – passenger side\u003c\/li\u003e\n  \u003cli\u003eES800223 front outer tie rod ends (2)\u003c\/li\u003e\n  \u003cli\u003eEV800084 front inner tie rod ends (2)\u003c\/li\u003e\n  \u003cli\u003eK6541 front lower ball joints (2)\u003c\/li\u003e\n  \u003cli\u003eK700432 front sway bar end links (2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and years does this SCITOO kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis set is engineered for a range of GM full-size trucks and SUVs. Check your vehicle’s year, make, model and trim against the list below before ordering to ensure fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Silverado 1500 (2007–2013), Tahoe (2007–2014), Suburban 1500 (2007–2013), Avalanche (2007–2013)\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra 1500 (2007–2013), Yukon and Yukon XL 1500 (2007–2013)\u003c\/li\u003e\n  \u003cli\u003eCadillac: Escalade models (selected years 2007–2014; check engine and body style notes)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these parts arrive ready to install and reduce future maintenance?\u003c\/h3\u003e\n\u003cp\u003eSCITOO ships the suspension components pregreased to simplify installation and reduce immediate break-in needs. While greased joints cut initial prep time, a proper alignment after installation is still required for safe handling and to prevent uneven tire wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAll ball joints and tie rod ends pregreased at the factory\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement parts designed to match OE mounting points\u003c\/li\u003e\n  \u003cli\u003eAfter-install alignment recommended for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing these components together save time and money?\u003c\/h3\u003e\n\u003cp\u003eChanging control arms, tie rod ends, sway bar links and ball joints in one service reduces redundant labor and ensures the steering system is uniformly fresh. This comprehensive approach prevents a single worn component from undermining new parts and avoids multiple visits to the shop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConsolidates labor for related front-end components\u003c\/li\u003e\n  \u003cli\u003eHelps achieve consistent steering geometry and alignment\u003c\/li\u003e\n  \u003cli\u003eReduces risk of follow-up repairs caused by mixed-aged parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: This SCITOO 10-piece front suspension kit is intended for mechanics, DIY enthusiasts and fleet owners working on compatible GM trucks and SUVs from the 2007–2014 era who want a coordinated set of replacement steering and suspension parts. If you need to address steering looseness, clunking over bumps, or restore alignment geometry after wear, this kit gives the main front-end components in one package—confirm fitment using your vehicle’s exact year, make, model and trim before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an alignment after installing this SCITOO suspension kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A professional wheel alignment is recommended after installation to ensure correct steering geometry and prevent uneven tire wear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the ball joints and tie rod ends pregreased?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. SCITOO parts in this kit come pregreased to reduce initial prep and simplify installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SCITOO","offers":[{"title":"Default Title","offer_id":67585053130937,"sku":"B07FZ41Y4N","price":261.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/scitoo-front-suspension-kit-packaging_9d369004-2c5a-42ce-88ee-b445dc0d03ae.jpg?v=1790465216"},{"product_id":"tadamark-front-lower-control-arm-suspension-kit-8-piece-front-end-rebuild-for-2007-2017-jeep-compass-patriot-2009-2012-dodge-c","title":"TadaMark Front Lower Control Arm Suspension Kit — 8‑Piece Front-End Rebuild for 2007–2017 Jeep Compass\/Patriot \u0026 2009–2012 Dodge C","description":"\u003cb\u003eTadaMark 8-piece front lower control arm suspension kit is a complete replacement set engineered to restore steering alignment and front-end stability on 2007–2017 Jeep Compass and Patriot and 2009–2012 Dodge Caliber models.\u003c\/b\u003e\n\n\u003cp\u003eIf your vehicle is showing uneven tire wear, wandering steering, or unusual front-end noises, worn lower control arms, ball joints, and tie rod ends are common causes. This TadaMark kit supplies left and right front lower control arms with pre-installed ball joints, plus sway bar end links and inner\/outer tie rod ends, replacing multiple OEM part numbers for a full front suspension refresh. The components are made from high-strength steel and finished for corrosion resistance to withstand everyday driving and road stress.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included and which models do they fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains eight components: two front lower control arms with ball joints (left and right), two front sway bar end links, two inner tie rod ends, and two outer tie rod ends. It is designed to fit 2007–2017 Jeep Compass, 2007–2017 Jeep Patriot, and 2009–2012 Dodge Caliber, covering common OEM replacement numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x front lower control arms with ball joints (left\/right)\u003c\/li\u003e\n  \u003cli\u003e2 x front sway bar end links\u003c\/li\u003e\n  \u003cli\u003e2 x inner tie rod ends\u003c\/li\u003e\n  \u003cli\u003e2 x outer tie rod ends\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers like K620066, K620065, EV80645, ES800408, K750385 and several factory numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit impact steering feel and tire wear?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn control arms and tie rod ends restores correct steering geometry and minimizes play in the front end. That leads to more predictable steering response, improved handling, and even tire contact that reduces irregular tire wear when properly aligned afterward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces steering wander and looseness\u003c\/li\u003e\n  \u003cli\u003eHelps correct camber\/toe deviations caused by worn parts\u003c\/li\u003e\n  \u003cli\u003ePromotes even tire wear when combined with a wheel alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these parts durable and easy to install?\u003c\/h3\u003e\n\u003cp\u003eEach component is manufactured from high-strength steel and treated for durability to resist normal road conditions and stresses. Fitment is direct-replacement for the listed vehicles; installation typically involves standard suspension service steps and should be performed by a qualified mechanic if you lack experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel construction for longevity\u003c\/li\u003e\n  \u003cli\u003ePre-assembled ball joints reduce installation steps\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design matches factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat service support and warranty does TadaMark provide?\u003c\/h3\u003e\n\u003cp\u003eTadaMark backs the kit with a one-year satisfaction warranty to address functional or fitment concerns after purchase. If you encounter issues, contact the seller for troubleshooting, replacement, or return assistance per the warranty terms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1-year satisfaction warranty included\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment questions\u003c\/li\u003e\n  \u003cli\u003eReplaceable coverage for defective components during warranty period\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: this TadaMark 8-piece front suspension kit is suited for owners and mechanics working on 2007–2017 Jeep Compass and Patriot or 2009–2012 Dodge Caliber that need a comprehensive front-end rebuild. It’s ideal when multiple front suspension parts show wear, when you want a coordinated replacement to prevent mismatched lifespans, or when preparing a vehicle for long-term, reliable daily driving. For best results, install the kit and follow with a professional wheel alignment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2010 Jeep Patriot?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit fits 2007–2017 Jeep Patriot models, including 2010, as a direct-replacement for the listed OEM numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an alignment after installing this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A professional wheel alignment is recommended after installation to ensure correct steering geometry and even tire wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TadaMark","offers":[{"title":"Default Title","offer_id":67585056800953,"sku":"B0BGSCMBQN","price":218.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tadamark-front-lower-control-arms-kit-front-view.jpg?v=1790465339"},{"product_id":"scitoo-front-suspension-kit-10-piece-for-chevy-silverado-tahoe-1999-2006-control-arms-tie-rods","title":"SCITOO Front Suspension Kit 10‑Piece for Chevy Silverado\/Tahoe 1999–2006 — Control Arms \u0026 Tie Rods","description":"\u003cp\u003e\u003cstrong\u003eComplete 10-piece front suspension kit that replaces upper control arms, inner and outer tie rod ends, sway bar links and lower ball joints for select Chevy, GMC and Cadillac trucks and SUVs from 1999–2007.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis SCITOO kit groups the most commonly replaced front-end components into one package so you can restore steering precision and chassis control in one service. The set includes two upper control arms with ball joints, two lower ball joints, two sway bar end links, two inner tie rod ends and two outer tie rod ends. Fitment covers many Silverado, Sierra, Tahoe, Suburban, Yukon, Avalanche and Escalade models across model years listed below; always confirm compatibility with your VIN or factory specifications before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains ten parts designed to address wear in the front suspension and steering system. Replacing all these components at once helps eliminate multiple sources of play and uneven tire wear while simplifying labor compared with piecemeal fixes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x K80826 front upper control arms with integrated ball joints and offset bushings — restores proper camber and caster.\u003c\/li\u003e\n  \u003cli\u003e2 x K6541 front lower ball joints — supports knuckle pivot and vertical load.\u003c\/li\u003e\n  \u003cli\u003e2 x K8987 sway bar end links — keeps anti-roll bar connected for roll control.\u003c\/li\u003e\n  \u003cli\u003e2 x ES3488 inner tie rod ends and 2 x ES3493T outer tie rod ends — rebuilds the steering linkage for accurate turn-in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and years does this SCITOO kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is intended for a range of GM full-size trucks and SUVs. Fitment varies by drivetrain and year, so double-check the engine and axle options listed for exact matches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevy Silverado 1500: many 1999–2006 models (4WD\/AWD\/RWD variants, includes 2007 Classic)\u003c\/li\u003e\n  \u003cli\u003eChevy Tahoe\/Suburban and Avalanche 1500: selected 2000–2006 model years\u003c\/li\u003e\n  \u003cli\u003eGMC Sierra 1500, Yukon, Yukon XL and Cadillac Escalade models: 1999–2006 coverage including ESV\/EXT where specified\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will installing this kit affect driving and maintenance?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn control arms, ball joints and tie rods noticeably reduces slack in the steering and stabilizes handling. After installation you should feel crisper steering response, reduced wandering, and more consistent tire wear, though a professional alignment is required to lock in the correct geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved steering precision and reduced play through refreshed tie rod ends.\u003c\/li\u003e\n  \u003cli\u003eBetter roll control when sway bar links are renewed.\u003c\/li\u003e\n  \u003cli\u003eRestored suspension geometry from new control arms and ball joints.\u003c\/li\u003e\n  \u003cli\u003eRecommended professional wheel alignment after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and service intervals?\u003c\/h3\u003e\n\u003cp\u003eInstallation is manageable with standard hand tools, but some parts require press or ball-joint tools. SCITOO recommends replacing front or rear suspension components every 50,000–100,000 miles as conditions and driving style dictate. Always torque fasteners to factory specifications and verify fit before final assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic mechanical skillset required; some components may need a press or pickle fork for removal.\u003c\/li\u003e\n  \u003cli\u003eVerify part numbers and vehicle compatibility prior to installation.\u003c\/li\u003e\n  \u003cli\u003eProfessional alignment strongly advised after completing the job.\u003c\/li\u003e\n  \u003cli\u003eInspect related components (bushings, wheel bearings, CV joints) while servicing the front end.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This SCITOO 10-piece front suspension kit is aimed at DIY mechanics, independent shops and fleet owners who need a comprehensive front-end rebuild for late-1990s to mid-2000s GM full-size trucks and SUVs. It suits anyone replacing multiple worn steering or suspension parts at once to save time and ensure matched new components, provided they confirm vehicle fitment and perform a proper alignment after installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both upper and lower ball joints?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes two upper control arms with ball joints and two separate lower ball joints for the front suspension.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need an alignment after installing the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A professional wheel alignment is recommended after installation to ensure correct steering and tire wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SCITOO","offers":[{"title":"Default Title","offer_id":67585072627897,"sku":"B07FXWK7ZR","price":296.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/scitoo-front-suspension-kit-packaging_8bbbfa40-8c29-4361-b45a-437e71a70377.jpg?v=1790466061"},{"product_id":"newyall-front-lower-control-arms-left-right-for-ford-focus-and-transit-connect-with-preinstalled-ball-joints","title":"NewYall Front Lower Control Arms — Left \u0026 Right for Ford Focus and Transit Connect with Preinstalled Ball Joints","description":"\u003cstrong\u003eNewYall front lower control arms (left and right) with integrated ball joints replace the factory front lower suspension arms on select Ford Focus and Transit Connect models.\u003c\/strong\u003e\n\nThese direct-fit replacement control arms come as left and right units and include the ball joints preinstalled, engineered to match OEM mounting points and restore factory geometry for 2012–2018 Ford Focus and 2014–2023 Ford Transit Connect vehicles. They are sold as front lower assemblies, designed for mechanics and DIYers who need a straightforward swap to address worn suspension links, looseness, or steering play without custom modifications.\n\n\u003ch3\u003eWhat vehicles do these control arms fit?\u003c\/h3\u003e\n\u003cp\u003eThese NewYall front lower control arms are built specifically for the front left and right positions on the listed model years. Confirm fitment by matching your vehicle year and front lower arm application before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord Focus model years: 2012–2018\u003c\/li\u003e\n  \u003cli\u003eFord Transit Connect model years: 2014–2023\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement design for factory mounting locations\u003c\/li\u003e\n  \u003cli\u003eLeft and right arms sold together for complete front axle service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the integrated ball joint affect installation?\u003c\/h3\u003e\n\u003cp\u003eEach control arm comes with the ball joint preinstalled, minimizing tasks during replacement and reducing the need to press or transfer old joint hardware. That simplifies alignment of the steering knuckle and speeds up installation for a clean, consistent fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBall joints already attached to each control arm assembly\u003c\/li\u003e\n  \u003cli\u003eEliminates separate ball joint removal\/pressing in most replacements\u003c\/li\u003e\n  \u003cli\u003eMakes the swap faster for shops and experienced DIY mechanics\u003c\/li\u003e\n  \u003cli\u003eOEM-style mounting points to align with factory bolts and bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during the swap and post-installation?\u003c\/h3\u003e\n\u003cp\u003eExpect a standard front-suspension replacement procedure: lift the vehicle, remove the wheel, detach the lower arm from the subframe and steering knuckle, then install the NewYall arm and torque hardware to factory specs. After installation, a professional wheel alignment is recommended to restore correct toe and camber settings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical tools required: jack, stands, sockets, torque wrench, pry bar\u003c\/li\u003e\n  \u003cli\u003eRecommended: replace both left and right arms together for symmetry\u003c\/li\u003e\n  \u003cli\u003eAlways torque all fasteners to manufacturer specifications\u003c\/li\u003e\n  \u003cli\u003eFollow with a four-wheel alignment to ensure proper handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose NewYall control arms over used or generic parts?\u003c\/h3\u003e\n\u003cp\u003eNewYall control arms are produced to match replacement geometry and include fresh bushings and ball joints, giving predictable ride and steering response compared with worn OE parts. Buying new assemblies reduces the chance of hidden wear and saves time compared with reusing old components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew assemblies eliminate unknown wear in reused parts\u003c\/li\u003e\n  \u003cli\u003eIncludes both left and right front lower units for a balanced repair\u003c\/li\u003e\n  \u003cli\u003eOptions for professional installs or competent DIYers\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct-fit installation on listed Ford models\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nThis product is aimed at vehicle owners, independent mechanics, and fleet technicians who service Ford Focus (2012–2018) and Ford Transit Connect (2014–2023) models and need a reliable front lower control arm replacement with an included ball joint. It’s suitable for anyone replacing damaged or worn front suspension lower links who wants a direct-fit part that simplifies installation and helps return the vehicle to correct steering geometry. If you’re unsure about compatibility, have your VIN or vehicle year and front suspension details on hand when ordering or consult a professional installer.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are both left and right control arms included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes both front lower left and right control arms with ball joints.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an alignment after installing these arms?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — a professional wheel alignment is recommended after replacement to restore proper geometry.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"NewYall","offers":[{"title":"Default Title","offer_id":67585083408569,"sku":"B0F7QXJ1M7","price":250.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/newyall-front-lower-control-arm-front-view.jpg?v=1790466573"},{"product_id":"hawk-brother-control-arm-replacement-for-2009-2015-honda-pilot-left-right-with-silicone-bushings","title":"HAWK BROTHER Control Arm Replacement for 2009–2015 Honda Pilot — Left \u0026 Right with Silicone Bushings","description":"\u003cp\u003e\u003cstrong\u003eHAWK BROTHER control arms replace worn front lower suspension links on 2009–2015 Honda Pilot models to restore steering stability and reduce road vibration.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Pilot feels loose in corners, produces clunking from the front suspension, or transmits extra vibration and road noise into the cabin, worn control arms are a common cause. These HAWK BROTHER replacement lower control arms are engineered as direct-fit aftermarket parts for 2009–2015 Honda Pilot vehicles. They use silicone bushings, high-strength steel construction and an electrophoretic corrosion coating to match OEM mounting points while offering long-term durability.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms improve ride comfort and noise?\u003c\/h3\u003e\n\u003cp\u003eSilicone bushings dampen road shocks and isolate high-frequency vibration that would otherwise transfer into the steering and cabin. That reduces perceived harshness over bumps and gives steadier feedback through turns without changing ride geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone bushings absorb vibration more effectively than worn rubber.\u003c\/li\u003e\n  \u003cli\u003eHigh-strength steel body resists bending under load for consistent handling.\u003c\/li\u003e\n  \u003cli\u003eElectrophoretic coating slows corrosion to preserve bushings and ball joint fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these control arms a direct replacement for my 2009–2015 Honda Pilot?\u003c\/h3\u003e\n\u003cp\u003eYes — HAWK BROTHER designed these to match the original mounting points for compatible Pilot model years. Always verify fitment using your VIN or the product fitment filter to confirm these part numbers align with your specific trim and assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer part numbers: K621551, K621550 for left and right sides.\u003c\/li\u003e\n  \u003cli\u003eFits many OEM references like 51350SZAA02 \/ 51360SZAA02 and others listed in the part details.\u003c\/li\u003e\n  \u003cli\u003eSold as left and right control arms; confirm vehicle side before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protections are used to extend service life?\u003c\/h3\u003e\n\u003cp\u003eThe control arm bodies are formed from high-strength steel to maintain rigidity under load, while an electrophoretic (e-coat) finish protects metal surfaces from rust and road salt. All joints and fastening points are manufactured and tested to ensure reliable fit and function similar to the original equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel construction for structural longevity.\u003c\/li\u003e\n  \u003cli\u003eElectrophoretic coating for enhanced corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined mounting points to reduce premature wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these myself, and what should I inspect during installation?\u003c\/h3\u003e\n\u003cp\u003eExperienced DIYers with the right tools can replace control arms at home, but follow torque specs and safety procedures. If you’re unsure, have a qualified mechanic install the parts and perform a post-replacement alignment to maintain tire life and handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck ball joint and bushing preload during installation.\u003c\/li\u003e\n  \u003cli\u003eFollow factory torque values and use new hardware where specified.\u003c\/li\u003e\n  \u003cli\u003eAlways perform a wheel alignment after replacing front suspension components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers of 2009–2015 Honda Pilot vehicles who are experiencing loose steering, front-end noise, premature tire wear, or increased vibration will benefit from these HAWK BROTHER control arms. They suit owners seeking a cost-effective, OEM-compatible replacement that improves drivability and reduces road noise, whether performing a professional repair or a confident DIY replacement. Confirm compatibility with your VIN and the fitment tool before purchasing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eManufacturer Part Number: K621551, K621550\u003c\/li\u003e\n  \u003cli\u003eCompatible OEM\/ OE numbers included for verification: 51350SZAA02, 51350SZAA03, 51350SZAA04, 51350SZAA07, 51360SZAA02, 51360SZAA03, 51360SZAA04, 51360SZAA07, TC5785, TC5772 and others.\u003c\/li\u003e\n  \u003cli\u003eApplicable Models: 2009–2015 Honda Pilot — confirm by VIN.\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce noise and vibration with silicone bushings and resist corrosion with electrophoretic coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these control arms fit my 2012 Honda Pilot?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed for 2009–2015 Pilots; confirm fitment with your VIN or the product fitment checker before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an alignment after installing these control arms?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A wheel alignment is recommended after front suspension work to prevent uneven tire wear and ensure correct handling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HAWK BROTHER","offers":[{"title":"Default Title","offer_id":67585085407417,"sku":"B0CC23BK7G","price":405.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/hawk-brother-control-arm-front-packaging.jpg?v=1790466677"},{"product_id":"scitoo-front-suspension-kit-for-ford-fusion-lincoln-mkz-8-piece-2013-2018-pre-greased-control-arms-tie-rods-sway-links","title":"SCITOO front suspension kit for Ford Fusion \u0026 Lincoln MKZ — 8-piece (2013–2018) pre-greased control arms, tie rods \u0026 sway links","description":"\u003cp\u003e\u003cstrong\u003eComplete 8-piece front suspension kit from SCITOO replaces lower control arms with ball joints, outer tie rod ends, and front\/rear sway bar links for Ford Fusion (2013–2017) and Lincoln MKZ (2013–2018).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis SCITOO kit bundles the most commonly worn front suspension components into one package so you can restore steering precision and road comfort in compatible Fusion and MKZ models. Each part is pre-greased and ready to install, reducing prep time. The set covers both passenger and driver sides where applicable and carries a 1-year replacement assurance from SCITOO for manufacturing defects.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit improve steering and ride feel?\u003c\/h3\u003e\n\u003cp\u003eWorn control arms, ball joints, tie rods, and sway bar links allow excess play and noise, which harms handling and comfort. Replacing these components tightens suspension geometry and reduces vibration, helping the vehicle track straighter and respond more predictably to steering inputs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct wheel alignment points by replacing lower control arms with integrated ball joints.\u003c\/li\u003e\n  \u003cli\u003eEliminates play from outer tie rod ends, improving turn-in responsiveness.\u003c\/li\u003e\n  \u003cli\u003eReplaces sway bar links to reduce body roll and clunking over bumps.\u003c\/li\u003e\n  \u003cli\u003ePre-greased parts minimize initial break-in noise and speed installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich exact parts are included and which years\/models do they fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains eight pieces designed as a matched set for front suspension service on specific Ford and Lincoln vehicles. Confirm vehicle year, make, model, and trim before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x K623000 front lower control arm \u0026amp; ball joint – passenger side\u003c\/li\u003e\n  \u003cli\u003e1 x K623001 front lower control arm \u0026amp; ball joint – driver side\u003c\/li\u003e\n  \u003cli\u003e1 x ES801109 front outer tie rod end – passenger side\u003c\/li\u003e\n  \u003cli\u003e1 x ES801110 front outer tie rod end – driver side\u003c\/li\u003e\n  \u003cli\u003e2 x K750740 front sway bar end links and 2 x K750744 rear sway bar end links\u003c\/li\u003e\n  \u003cli\u003eFitment: Ford Fusion 2013–2017 and Lincoln MKZ 2013–2018 (verify trim compatibility).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace these suspension parts?\u003c\/h3\u003e\n\u003cp\u003eReplace the components in this kit at the first sign of steering degradation or audible wear; early replacement prevents further damage and maintains safety. Common indicators include unusual noises, poor steering feel, or increased vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteering produces clunks or creaks while turning.\u003c\/li\u003e\n  \u003cli\u003eDriver feels every bump and the ride seems harsher than before.\u003c\/li\u003e\n  \u003cli\u003eSteering requires more effort or the vehicle wanders on the road.\u003c\/li\u003e\n  \u003cli\u003eVisible wear, torn boots, or excessive play when inspected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eEach SCITOO part is pre-greased so you typically won’t need to apply additional lubricant before installation, which streamlines the job. Professional alignment after installation is recommended to ensure optimal tire wear and handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-greased components reduce prep work and initial noise.\u003c\/li\u003e\n  \u003cli\u003eBasic mechanic tools and common shop presses may be required for control arm removal and fitting.\u003c\/li\u003e\n  \u003cli\u003eAlways perform a wheel alignment after replacing control arms or tie rod ends.\u003c\/li\u003e\n  \u003cli\u003eInspect sway links and ball joints periodically for wear or torn boots.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This SCITOO 8-piece suspension kit is intended for owners and mechanics servicing Ford Fusion (2013–2017) and Lincoln MKZ (2013–2018) vehicles who want a matched set of front suspension components. It’s well suited for DIYers with mechanical experience, independent shops performing front-end overhauls, and fleet maintenance teams seeking a single SKU solution for common wear items. Always verify exact vehicle fitment and have an alignment done after installation to restore factory handling characteristics.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my 2016 Ford Fusion?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this SCITOO 8-piece kit fits Ford Fusion model years 2013–2017. Verify trim compatibility via vehicle selector before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the parts pre-greased and ready to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, SCITOO ships these suspension components pre-greased, reducing prep time. Professional alignment after installation is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SCITOO","offers":[{"title":"Default Title","offer_id":67585085931705,"sku":"B0BZPSZZF1","price":459.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/scitoo-front-packaging-overview.jpg?v=1790466722"},{"product_id":"petmigo-front-lower-control-arms-for-equinox-terrain-2pc-2010-2017-pre-installed-ball-joints","title":"PetMigo Front Lower Control Arms for Equinox \u0026 Terrain — 2PC (2010–2017) Pre-Installed Ball Joints","description":"\u003cp\u003e\u003cstrong\u003ePetMigo front lower control arm kit with pre-installed ball joints replaces both driver and passenger sides on Chevrolet Equinox and GMC Terrain models from 2010 through 2017.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Equinox or Terrain shows uneven tire wear, loose steering feel, or clunking over bumps, worn lower control arms and ball joints are a common cause. This two-piece PetMigo kit supplies both front lower control arms with factory-aligned ball joints and bushings, engineered as direct-fit replacements to restore steering geometry and reduce vibration without modifying your vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these control arms affect steering and ride quality?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing worn control arms with this PetMigo kit re-centers the front suspension geometry, which helps return predictable steering response and smoother handling. The assemblies arrive with ball joints and rubber bushings pre-installed to minimize installation time and reduce noise and harshness from suspension joints.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRestores proper wheel alignment for improved steering accuracy.\u003c\/li\u003e\n  \u003cli\u003ePre-installed ball joints and bushings reduce road noise and vibration.\u003c\/li\u003e\n  \u003cli\u003eHigh-strength steel tubing improves structural stability under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this kit a reliable replacement option?\u003c\/h3\u003e\n\n\u003cp\u003ePetMigo designed these arms to meet or exceed OEM fitment and strength expectations for the listed model years. Each arm receives corrosion-resistant coatings and was tested for durability so you get long service life and consistent performance in daily driving conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDurable steel construction resists bending and fatigue over time.\u003c\/li\u003e\n  \u003cli\u003eProtective coatings guard against rust and environmental corrosion.\u003c\/li\u003e\n  \u003cli\u003eIndustry testing helps ensure a smooth, stable ride after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the 2-piece kit and how easy is installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit contains one driver-side and one passenger-side front lower control arm, each with a pre-assembled ball joint and bushing. Because they are built as direct-fit replacements, most installers — professional shops and experienced DIYers — can swap them without modifying mounting points or steering components.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes both left and right front lower control arms with ball joints.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design aligns with OEM mounting locations for straightforward installation.\u003c\/li\u003e\n  \u003cli\u003eRecommended to inspect related steering and suspension parts during replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these parts fit my specific Equinox or Terrain year and configuration?\u003c\/h3\u003e\n\n\u003cp\u003eThis PetMigo kit specifically fits Chevrolet Equinox and GMC Terrain model years 2010 through 2017. While designed as direct-fit components, confirm compatibility by checking your vehicle’s year, model, and suspension variant prior to purchase to avoid fitment issues.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible: Chevrolet Equinox 2010–2017; GMC Terrain 2010–2017.\u003c\/li\u003e\n  \u003cli\u003eVerify your vehicle’s year and suspension setup before ordering.\u003c\/li\u003e\n  \u003cli\u003eContact customer support with VIN details for fitment confirmation if unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This PetMigo front lower control arm kit is aimed at owners of 2010–2017 Equinox and Terrain vehicles who need to replace worn suspension components to restore steering precision, eliminate clunks or uneven tire wear, and improve ride comfort. It suits independent mechanics and DIY enthusiasts comfortable performing front suspension work and any repair shop looking for a durable, direct-fit replacement set with pre-installed ball joints.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these control arms include ball joints and bushings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each front lower control arm in the PetMigo kit comes with a pre-installed ball joint and bushings for quicker replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2013 Chevrolet Equinox?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is designed to fit Chevrolet Equinox and GMC Terrain models from 2010 through 2017, including 2013 models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PetMigo","offers":[{"title":"Default Title","offer_id":67585086030009,"sku":"B0CCRJJG3F","price":241.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/petmigo-front-lower-control-arms-front-view.jpg?v=1790466721"},{"product_id":"newyall-front-lower-suspension-control-arms-with-ball-joints-pre-assembled-for-select-2011-2016-hyundai-kia","title":"NewYall Front Lower Suspension Control Arms with Ball Joints — Pre-assembled for select 2011–2016 Hyundai \u0026 Kia","description":"\u003cp\u003e\u003cstrong\u003eNewYall front lower left and right suspension control arms with integrated ball joints are a direct-fit replacement for select 2011–2016 Hyundai and Kia models, restoring steering precision and front-end stability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese control arm assemblies are manufactured to match OE mounting points and geometry for Hyundai Sonata 2.0L\/2.4L (2011–2014), Hyundai Azera 3.3L (2012–2014), Kia Optima 2.0L\/2.4L (2011–2015) and Kia Cadenza 3.3L (2014–2016). Each arm comes pre-assembled with a ball joint to simplify installation and reduce shop time. Built for durability and accurate alignment, they help maintain ride quality and predictable handling after wear or collision damage.\u003c\/p\u003e\n\n\u003ch3\u003eWill these control arms fit my Hyundai or Kia?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is limited to the listed model years and engine sizes. Check your vehicle’s year and engine displacement against the fitment list to ensure the correct match. If your VIN has alternative suspension packages, verify part interchange before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Hyundai Sonata 2.0L and 2.4L: 2011–2014\u003c\/li\u003e\n  \u003cli\u003eFits Hyundai Azera 3.3L: 2012–2014\u003c\/li\u003e\n  \u003cli\u003eFits Kia Optima 2.0L and 2.4L: 2011–2015\u003c\/li\u003e\n  \u003cli\u003eFits Kia Cadenza 3.3L: 2014–2016\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these assemblies improve handling and longevity?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn control arms and ball joints restores correct suspension geometry, reducing uneven tire wear and play in the steering. The integrated-ball-joint design ensures a secure joint connection and consistent pivot performance under load. New bushings help isolate road noise and vibrations for a firmer, more controlled ride.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores factory steering alignment specs\u003c\/li\u003e\n  \u003cli\u003eReduces steering wheel wander and play\u003c\/li\u003e\n  \u003cli\u003eNew bushings damp road feedback and noise\u003c\/li\u003e\n  \u003cli\u003eDurable ball joint for consistent pivoting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThese are direct-replacement assemblies that arrive pre-assembled with ball joints, cutting out ball-joint press work and saving labor time. Basic suspension knowledge and standard hand and torque tools are usually sufficient for a professional DIY mechanic. After installation, a wheel alignment is recommended to set toe and camber accurately.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes pre-assembled—no separate ball-joint press required\u003c\/li\u003e\n  \u003cli\u003eTypical install time: 1–2 hours per side for experienced mechanics\u003c\/li\u003e\n  \u003cli\u003eWheel alignment required after replacement\u003c\/li\u003e\n  \u003cli\u003eInspect mounting hardware and torque to factory specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these NewYall control arms durable and safe?\u003c\/h3\u003e\n\u003cp\u003eThe components are built to meet or exceed OEM mounting and load requirements, using reinforced cast or stamped arms and quality ball joint components. Proper installation and periodic inspections ensure long service life and safe handling characteristics. They are a cost-effective option to restore factory-like performance after wear or collision.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to OE-style fit and function\u003c\/li\u003e\n  \u003cli\u003eQuality ball joint and bushing materials for longevity\u003c\/li\u003e\n  \u003cli\u003eDesigned to handle normal road and load conditions\u003c\/li\u003e\n  \u003cli\u003eReplace in pairs (left and right) for balanced handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: NewYall front lower control arms with ball joint assemblies are aimed at owners and technicians who need a reliable, direct-fit replacement for the front suspension on compatible Hyundai Sonata, Azera and Kia Optima and Cadenza models. They’re ideal for vehicles showing front-end looseness, uneven tire wear, noise from worn bushings or after front-end repairs where restoring factory geometry is required. If you want a quicker install with pre-assembled ball joints and an assembled pair for consistent handling, these assemblies are a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these arms include the ball joints?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each front lower control arm comes pre-assembled with the ball joint to simplify installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is an alignment needed after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A wheel alignment is recommended after replacing control arms to restore proper toe and camber.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"NewYall","offers":[{"title":"Default Title","offer_id":67585086652601,"sku":"B0CL62NHXT","price":238.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/newyall-front-control-arm-pair-front-packaging.jpg?v=1790466766"},{"product_id":"petmigo-front-suspension-8-piece-lower-control-arm-kit-for-dodge-caliber-jeep-compass-patriot-preinstalled-ball-joints-direct","title":"PetMigo Front Suspension 8-Piece Lower Control Arm Kit for Dodge Caliber \u0026 Jeep Compass\/Patriot — Preinstalled Ball Joints, Direct","description":"\u003cp\u003e\u003cstrong\u003eComplete 8-piece front suspension kit by PetMigo replaces worn lower control arms, ball joints, tie rod ends and sway links to restore precise steering and stable ride for compatible Dodge Caliber and Jeep Compass\/Patriot models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle shows uneven tire wear, loose steering feel, or clunks over bumps, a worn front suspension assembly may be the cause. This PetMigo kit bundles the most common front suspension service parts—two lower control arms with pre-installed ball joints, inner and outer tie rod ends, plus sway bar links—so you get a matched, direct-fit replacement set designed to simplify installation and return factory steering geometry.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included in this 8-piece PetMigo suspension kit?\u003c\/h3\u003e\n\u003cp\u003eThe set contains the core front-end components technicians typically replace together for safe steering and alignment: two driver-side lower control arms with ball joints, two sway bar links, two inner tie rod end links and two outer tie rod end links. Every control arm arrives with bushings and a pre-pressed ball joint to save time during installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2× front lower control arms with ball joints (driver side)\u003c\/li\u003e\n  \u003cli\u003e2× front sway bar links\u003c\/li\u003e\n  \u003cli\u003e2× front inner tie rod ends\u003c\/li\u003e\n  \u003cli\u003e2× front outer tie rod ends\u003c\/li\u003e\n  \u003cli\u003ePre-installed bushings and ball joints on control arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles will these parts fit and how can I confirm compatibility?\u003c\/h3\u003e\n\u003cp\u003eThis kit is engineered for Dodge Caliber model years 2009–2012 and Jeep Compass\/Patriot model years 2007–2017. Note: for 2017 Compass compatibility, it applies to US-built units identified by a first VIN digit of “1.” Always verify your VIN and compare part numbers before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Dodge Caliber 2009–2012\u003c\/li\u003e\n  \u003cli\u003eCompatible: Jeep Compass 2007–2017 (2017 US-built, 1st VIN digit = 1)\u003c\/li\u003e\n  \u003cli\u003eCompatible: Jeep Patriot 2007–2017\u003c\/li\u003e\n  \u003cli\u003eRecommendation: confirm vehicle VIN and compare to OEM references\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these PetMigo parts built, and what durability features do they offer?\u003c\/h3\u003e\n\u003cp\u003ePetMigo constructs the control arms from high-strength steel tubing for improved structural integrity and long service life. They are finished with protective coatings to resist rust and corrosion, while pre-installed bushings and ball joints reduce vibration and noise for a quieter, more controlled drive.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel tubing increases load resistance\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant coatings extend component life\u003c\/li\u003e\n  \u003cli\u003ePre-assembled joints and bushings cut installation time\u003c\/li\u003e\n  \u003cli\u003eDesigned to lower road noise, vibration and harshness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these parts affect wheel alignment or require special installation steps?\u003c\/h3\u003e\n\u003cp\u003eThe PetMigo kit is manufactured as a direct-fit replacement to match original mounting points and steering geometry. After installation, a professional wheel alignment is strongly recommended to ensure proper tire wear and handling. Basic hardware and installation practices are the same as OEM replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design aligns with original mounting points\u003c\/li\u003e\n  \u003cli\u003eProfessional wheel alignment recommended post-install\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard steering linkage replacement procedures\u003c\/li\u003e\n  \u003cli\u003eInspect related suspension components during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This PetMigo 8-piece front suspension kit suits DIY mechanics and professional shops replacing worn front steering and suspension components on Dodge Caliber and Jeep Compass\/Patriot vehicles within the stated years. Choose this kit if you want matched replacement parts that reduce installation steps, restore stable steering, and help prevent premature tire wear—just confirm VIN compatibility and follow with a professional alignment for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both inner and outer tie rod ends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 8-piece PetMigo kit includes two inner tie rod ends and two outer tie rod ends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an alignment after installing this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — a professional wheel alignment is recommended after installation to ensure proper handling and tire wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PetMigo","offers":[{"title":"Default Title","offer_id":67585087504569,"sku":"B0CCRFML7R","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/petmigo-front-lower-control-arms-packaging.jpg?v=1790466792"},{"product_id":"aeagle-front-lower-control-arm-ball-joint-kit-2-piece-set-pre-greased-oe-fit-for-town-country-grand-caravan-routan","title":"Aeagle Front Lower Control Arm \u0026 Ball Joint Kit, 2-Piece Set — Pre-Greased OE-Fit for Town \u0026 Country\/Grand Caravan\/Routan","description":"\u003cp\u003e\u003cstrong\u003eAeagle's Front Lower Control Arm and Ball Joint kit (MS251001\/MS251002) is a direct-fit suspension replacement for select Town \u0026amp; Country, Grand Caravan, Ram C\/V and Volkswagen Routan models that restores steering geometry and road stability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis two-piece set includes pre-greased front lower control arm assemblies with integrated ball joints for the driver and passenger sides. Built to match original equipment fitment, the assemblies replace worn or damaged components to help maintain correct wheel alignment, reduce play in the front suspension, and deliver consistent handling after installation. The parts are manufactured from durable materials, pre-tested for quality, and backed by a 12-month warranty from Aeagle.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms improve steering and wheel alignment?\u003c\/h3\u003e\n\u003cp\u003eWorn control arms and ball joints allow excessive movement that alters suspension geometry and leads to uneven tire wear and imprecise steering. Installing this Aeagle kit restores the original mounting points and ball-joint pivot, which helps keep the wheel track and camber within factory tolerances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design matches factory dimensions for proper alignment.\u003c\/li\u003e\n  \u003cli\u003ePre-greased ball joints reduce initial friction and break-in wear.\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty construction resists bending and premature failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my vehicle and what’s included?\u003c\/h3\u003e\n\u003cp\u003eThe kit is engineered for specific model years and fits without modification when matched to the listed vehicles. Aeagle supplies both left and right front lower control arm assemblies so you replace the entire front lower pair at once for balanced handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Town \u0026amp; Country (2008–2016), Dodge Grand Caravan (2008–2020), Ram C\/V (2012–2015), Volkswagen Routan (2009–2014).\u003c\/li\u003e\n  \u003cli\u003eContents: 1x driver-side front lower control arm assembly (MS251001), 1x passenger-side assembly (MS251002).\u003c\/li\u003e\n  \u003cli\u003eAll assemblies come pre-greased and ready for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and warranty details?\u003c\/h3\u003e\n\u003cp\u003eAeagle manufactures these control arm assemblies using materials and processes intended to meet or exceed the robustness of the original parts. Each assembly is tested for fit and durability; pre-greased ball joints and heavy-duty bushings help extend life under typical driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured from high-quality materials with multiple quality checks.\u003c\/li\u003e\n  \u003cli\u003ePre-greased ball joints to reduce friction and early wear.\u003c\/li\u003e\n  \u003cli\u003e12-month warranty backed by Aeagle customer support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation, and what should I expect after replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires standard suspension tools and basic mechanical experience; wheel alignment after installation is recommended to ensure correct tracking. After replacement you should notice firmer front-end control, reduced play in the steering, and more even tire wear if alignment is corrected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional or experienced DIY installation recommended; alignment required post-install.\u003c\/li\u003e\n  \u003cli\u003eExpect improved steering response and reduced front suspension noise.\u003c\/li\u003e\n  \u003cli\u003eReplace both sides as a pair for balanced handling and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Aeagle MS251001\/MS251002 front lower control arm and ball joint set is intended for owners of the listed Chrysler, Dodge, Ram, and Volkswagen models who need a direct-fit replacement for worn suspension components. It suits DIY mechanics familiar with front-end service and professional shops that require OE-style fitment, pre-greased joints, and a backed warranty for reliable repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both left and right control arms?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the set includes one driver-side (MS251001) and one passenger-side (MS251002) front lower control arm assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an alignment after installing these parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, a wheel alignment is recommended after installation to restore correct suspension geometry and prevent uneven tire wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Aeagle","offers":[{"title":"Default Title","offer_id":67585087832249,"sku":"B0C36GM2KN","price":260.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/aeagle-front-lower-control-arm-assembly-driver-side.jpg?v=1790466810"},{"product_id":"moog-front-left-lower-control-arm-with-pre-installed-ball-joint-for-mazda-cx-5-mazda-6-rk623522-direct-fit-corrosion-resista","title":"MOOG Front Left Lower Control Arm with Pre‑Installed Ball Joint for Mazda CX-5 \/ Mazda 6 — RK623522, Direct‑Fit, Corrosion‑Resista","description":"\u003cp\u003e\u003cstrong\u003eMOOG RK623522 is a complete front left lower suspension control arm and ball joint assembly engineered to restore steering precision and durable alignment for compatible Mazda models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis assembly combines MOOG's reinforced control arm design with a pre-installed ball joint so you can replace a worn suspension link with one engineered for strength, corrosion resistance, and accurate suspension geometry. It’s built for drivers who need a direct-fit replacement that supports factory-style alignment and helps return original steering response after component wear.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this control arm affect steering and alignment?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn lower control arm with a MOOG RK623522 helps re-center suspension geometry, reducing wandering and uneven tire wear. The integrated ball joint ensures the correct pivot point and consistent articulation under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores wheel alignment tolerances to factory specifications\u003c\/li\u003e\n  \u003cli\u003eEliminates excess play that causes vague steering feel\u003c\/li\u003e\n  \u003cli\u003eSupports even tire contact for longer tread life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this MOOG assembly durable for everyday driving?\u003c\/h3\u003e\n\u003cp\u003eMOOG designs these control arms for structural strength and corrosion protection so they withstand road stress, potholes, and typical seasonal exposure. The assembly arrives pre-assembled and tested to reduce installation variables that can compromise longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust metal construction resists bending and fatigue\u003c\/li\u003e\n  \u003cli\u003eProtective finishes reduce rust in harsh conditions\u003c\/li\u003e\n  \u003cli\u003ePre-installed ball joint minimizes installation error and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I expect during replacement?\u003c\/h3\u003e\n\u003cp\u003eThis RK623522 unit is a direct-fit OEM-style part for compatible Mazda years, designed to simplify installation and get you back on the road faster. Most technicians will remove the old arm, transfer minor brackets if required, and torque mounting hardware to factory specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit for front left lower position on specified Mazda models\u003c\/li\u003e\n  \u003cli\u003ePre-assembled ball joint reduces assembly steps and alignment drift\u003c\/li\u003e\n  \u003cli\u003eSaves time compared with sourcing separate arm and ball joint parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and situations is this part compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe MOOG RK623522 fits specified Mazda 6 and CX-5 model years, covering many common model years where front lower arm wear is observed. It’s suitable when you notice loose steering, clunking over bumps, or a failed ball joint on inspection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Mazda 6 (2014–2020) and Mazda CX-5 (2013–2016)\u003c\/li\u003e\n  \u003cli\u003eRecommended when visual wear, torn bushings, or ball joint play is present\u003c\/li\u003e\n  \u003cli\u003eUsed for preventative replacement during suspension overhauls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The MOOG RK623522 is built for DIYers and professional technicians who need a reliable, direct-replacement lower control arm assembly for the front left side of supported Mazda vehicles. It’s a practical choice for drivers seeking to restore handling precision, correct alignment issues, or replace a failing ball joint without sourcing multiple components separately. For best results, have the vehicle’s alignment checked and adjusted after installation to ensure optimal steering response and tire wear.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Mazda CX-5?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this RK623522 fits Mazda CX-5 model years 2013–2016. Verify with your VIN or vehicle year before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I get an alignment after installing this arm?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, an alignment is recommended after installation to ensure correct steering and prevent uneven tire wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOOG","offers":[{"title":"Default Title","offer_id":67585088389305,"sku":"B08VKCK6J9","price":252.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/moog-rk623522-front-left-assembly.jpg?v=1790466853"},{"product_id":"labwork-14-piece-front-suspension-kit-for-toyota-camry-2007-2011-control-arms-ball-joints-tie-rods-finish-coated","title":"labwork 14-Piece Front Suspension Kit for Toyota Camry 2007–2011 — Control Arms, Ball Joints \u0026 Tie Rods, Finish-Coated","description":"\u003cp\u003e\u003cstrong\u003elabwork 14Pc Front Suspension Kit is a complete, direct-fit set of front control arms and related steering\/suspension components designed to replace worn parts on Toyota Camry model years 2007–2011.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Camry 2007–2011 feels loose, clunks over bumps, or shows uneven tire wear, this 14-piece front suspension kit from labwork supplies the commonly replaced control arms, links, and hardware as a direct replacement for factory parts. Each metal component is finish-coated to resist corrosion and built to meet longevity and durability expectations for everyday driving. The kit references multiple OEM part numbers (EV800306, ES80602, ES80603, K500043, K500044, K620333, K620334, K750123, K750011) to make cross-referencing easier when confirming fitment.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly is included in this 14-piece front suspension kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles essential steering and suspension pieces for both sides of the front end to restore alignment geometry and handling response. While exact itemization can vary, these repair kits typically include upper and lower control arms, ball joints, tie rod ends, and mounting hardware for a full front-end refresh.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete set of left and right control arms (upper and\/or lower depending on kit)\u003c\/li\u003e\n  \u003cli\u003eBall joints and tie rod ends matched to Camry 2007–2011\u003c\/li\u003e\n  \u003cli\u003eAll necessary bolts, bushings, and mounting hardware\u003c\/li\u003e\n  \u003cli\u003eFinish-coated metal construction to resist rust and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this labwork kit improve driving feel and safety?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn control arms and steering links reduces play in the front end, restoring more predictable steering and better tire contact with the road. That helps reduce wandering, vibration, and uneven tire wear without changing factory suspension geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates looseness and clunking caused by fatigued joints\u003c\/li\u003e\n  \u003cli\u003eImproves steering precision and return-to-center behavior\u003c\/li\u003e\n  \u003cli\u003eHelps maintain proper wheel alignment and even tire wear\u003c\/li\u003e\n  \u003cli\u003eDurable coatings extend part life under road exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this labwork kit a direct replacement for OEM parts on my Camry?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit is designed as a direct replacement for the listed Toyota Camry years, matching fitment for common front suspension components. Always confirm compatibility by comparing the kit reference numbers to the parts on your vehicle before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-references common OEM numbers for easy verification\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design for bolt-on installation to original mounting points\u003c\/li\u003e\n  \u003cli\u003eIntended to match factory geometry without modification\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended to ensure proper torque and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? This labwork 14-piece front suspension kit is aimed at do-it-yourselfers with mechanical experience, independent repair shops, and fleet managers who maintain Toyota Camry 2007–2011 vehicles and want a comprehensive, cost-effective front-end refresh. If your car shows steering play, excessive vibration, or uneven tire wear, replacing worn control arms and related components with this kit can restore stability. Because the package includes multiple parts and requires proper tightening and alignment, plan for professional installation or ensure you have the correct tools, torque specifications, and an alignment afterward. Use the listed reference numbers to confirm fitment against the parts on your vehicle before ordering to avoid returns or installation delays.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote:\u003c\/em\u003e This description focuses on compatibility and mechanical performance. It does not provide guarantees of repair outcomes and is not a substitute for professional inspection, diagnosis, or installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my Toyota Camry 2008?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the labwork 14Pc front suspension kit fits Toyota Camry model years 2007–2011; confirm using the listed reference part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this kit myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can if you have suspension experience and proper tools, but professional installation and post-install wheel alignment are recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"labwork","offers":[{"title":"Default Title","offer_id":67585088913593,"sku":"B0B42C71MN","price":260.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/labwork-kit-front-packaging.jpg?v=1790466874"},{"product_id":"moog-front-right-lower-control-arm-with-preinstalled-ball-joint-for-mazda-cx-5-cx6-rk623521-reinforced-steel-oe-fit","title":"MOOG Front Right Lower Control Arm with Preinstalled Ball Joint for Mazda CX-5\/CX6 RK623521 — Reinforced Steel, OE Fit","description":"\u003cp\u003e\u003cstrong\u003eMOOG RK623521 is a complete front right lower suspension control arm with integrated ball joint engineered to restore steering precision and structural strength to compatible Mazda models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Mazda CX-5 or Mazda6 shows signs of uneven tire wear, loose steering, or a drifting feel, worn lower control arm components are often the cause. This MOOG assembly combines a stamped, reinforced arm with a preinstalled ball joint and corrosion-resistant finishes so you can replace the worn component quickly and return the vehicle to predictable handling. Designed and tested to meet or exceed OE fit and function, the RK623521 is a straightforward swap for the specified model years and comes from a brand known for long-lasting suspension components.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this control arm improve steering and handling?\u003c\/h3\u003e\n\u003cp\u003eReplacing a fatigued or damaged lower control arm with the MOOG RK623521 tightens the front suspension geometry, which reduces play and refines steering response. The integrated ball joint ensures correct articulation and consistent load distribution across turns and bumps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreinstalled ball joint for correct factory geometry\u003c\/li\u003e\n  \u003cli\u003eRobust stamped construction resists bending under load\u003c\/li\u003e\n  \u003cli\u003eRestores alignment points to reduce uneven tire wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles does this assembly fit and how do I confirm compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe RK623521 fits specific Mazda applications; always verify against your VIN or parts diagram before purchasing. This assembly is listed for certain Mazda CX-5 and Mazda6 model years—confirming fitment avoids returns and ensures fast installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with select Mazda CX-5 model years (check 2013–2016 fitment)\u003c\/li\u003e\n  \u003cli\u003eAlso fits certain Mazda6 model years (check 2014–2020 fitment)\u003c\/li\u003e\n  \u003cli\u003eMatch part number RK623521 and verify with your vehicle’s VIN or service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and design features make it durable?\u003c\/h3\u003e\n\u003cp\u003eMOOG engineers these control arms with structural reinforcement and corrosion protection so they withstand daily driving stresses and harsh road conditions. The assembly uses quality bushings and a ball joint designed for long service life under normal road loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStamped, reinforced steel construction for high structural strength\u003c\/li\u003e\n  \u003cli\u003eProtective coatings to resist rust and corrosion over time\u003c\/li\u003e\n  \u003cli\u003eQuality bushings and sealed ball joint to reduce wear and contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I expect during replacement?\u003c\/h3\u003e\n\u003cp\u003eBecause the ball joint is preinstalled, installation is simpler than replacing separate components, making it a practical option for DIY mechanics and professional shops. Typical steps include lifting the vehicle, removing the wheel, unbolting the old arm, and reattaching the new assembly with proper torque and alignment checks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design reduces modification or fabrication\u003c\/li\u003e\n  \u003cli\u003ePreinstalled ball joint saves time and ensures correct alignment\u003c\/li\u003e\n  \u003cli\u003eWheel alignment recommended after installation for optimal handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The MOOG RK623521 front right lower control arm and ball joint assembly is ideal for Mazda owners, mechanics, and shops needing a reliable OE-style replacement. Choose this assembly if your vehicle exhibits steering looseness, clunking over bumps, or uneven tire wear, and you want a durable part designed for direct fitment and long-term performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the MOOG RK623521 a direct replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s a direct-fit front right lower control arm assembly for specified Mazda model years; verify fitment with your VIN.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an alignment after installing this control arm?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A wheel alignment is recommended after replacement to ensure correct suspension geometry and tire wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MOOG","offers":[{"title":"Default Title","offer_id":67585089896633,"sku":"B08VKDQ32R","price":258.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/moog-rk623521-front-right-control-arm-front-view.jpg?v=1790466949"},{"product_id":"maxpeedingrods-adjustable-front-control-arm-kit-for-jeep-tj-xj-zj-upper-lower-steel-with-poly-bushings","title":"maXpeedingrods Adjustable Front Control Arm Kit for Jeep TJ\/XJ\/ZJ — Upper \u0026 Lower, Steel with Poly Bushings","description":"\u003cp\u003e\u003cstrong\u003emaXpeedingrods Adjustable Front Control Arm kit replaces factory arms to restore correct suspension geometry on lifted Jeep Wrangler TJ, Cherokee XJ and Grand Cherokee ZJ models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you lift a Jeep, suspension geometry shifts and can cause bump steer, uneven tire wear and compromised handling. This adjustable front upper and lower control arm set is engineered to correct track width and camber changes on lifted or stock-height Jeeps, offering durable steel construction, corrosion-resistant powder coat and premium poly bushings built to handle off-road abuse.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these adjustable control arms improve handling on a lifted Jeep?\u003c\/h3\u003e\n\u003cp\u003eAdjustability lets you lengthen or shorten the arms to re-center the axle and restore factory alignment angles after a lift. Restoring proper geometry reduces steering vagueness and bump steer for more predictable behavior on trail and road.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable lengths: upper 360–455 mm, lower 385–470 mm for precise alignment\u003c\/li\u003e\n  \u003cli\u003eRe-centers axle to correct toe and camber changes after lifts\u003c\/li\u003e\n  \u003cli\u003ePoly bushings dampen vibration while maintaining control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat Jeep models and lift heights will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis control arm set is designed for popular Jeep platforms and supports a wide range of suspension setups, from stock ride height to significant lifts. Confirm years and models to ensure correct fitment before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Jeep Wrangler TJ (1997–2006)\u003c\/li\u003e\n  \u003cli\u003eFits Jeep Cherokee XJ (1986–2001)\u003c\/li\u003e\n  \u003cli\u003eFits Jeep Grand Cherokee ZJ (1993–1998)\u003c\/li\u003e\n  \u003cli\u003eCompatible with setups from factory height up to approximately 8 inches of lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are included to handle off-road use?\u003c\/h3\u003e\n\u003cp\u003eThe arms are fabricated from heavy-gauge steel with a protective powder coat to resist rust in wet, muddy conditions. Hardened poly bushings and included sleeves increase durability and help maintain suspension precision under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStrong steel arms with rust-resistant powder coat finish\u003c\/li\u003e\n  \u003cli\u003ePremium poly bushings for improved wear resistance and heat tolerance\u003c\/li\u003e\n  \u003cli\u003ePackage includes 2 front upper and 2 front lower adjustable arms plus spare sleeves\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what support does maXpeedingrods provide?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires typical suspension tools and basic alignment afterward to dial in steering and tire angles. maXpeedingrods backs the kit with technical support and a limited warranty to help with fitment or quality questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes four adjustable arms sized for direct replacement\u003c\/li\u003e\n  \u003cli\u003eRequires post-install alignment for best handling and tire wear\u003c\/li\u003e\n  \u003cli\u003eLifetime technical support and 1-year limited warranty included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Off-road enthusiasts and weekend drivers who have lifted Jeep Wrangler TJ, Cherokee XJ or Grand Cherokee ZJ models and need a robust, adjustable solution to correct suspension geometry. Choose this kit if you want durable, easily adjustable front control arms that reduce bump steer, extend tire life and restore predictable steering for both on-road and trail conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2000 Jeep Cherokee XJ with a 4-inch lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the adjustable arms support stock height up to about 8 inches of lift; confirm arm lengths and perform alignment after installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the bushings greasable or maintenance-free?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit uses premium poly bushings designed for durability; routine inspection is recommended, but no frequent greasing is required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"maXpeedingrods","offers":[{"title":"Default Title","offer_id":67585090584761,"sku":"B0FK4PM88B","price":480.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/maxpeedingrods-front-control-arms-kit-packed.jpg?v=1790466989"},{"product_id":"tadamark-front-lower-control-arms-suspension-kit-6pc-fits-buick-chevy-gmc-saturn-restores-steering-stability","title":"TadaMark Front Lower Control Arms Suspension Kit 6pc — Fits Buick\/Chevy\/GMC\/Saturn, Restores Steering Stability","description":"\u003cp\u003e\u003cstrong\u003eThe TadaMark Front Lower Control Arms Suspension Kit is a six-piece replacement assembly that restores front-end geometry and steering stability for compatible Buick, Chevrolet, GMC, and Saturn SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle shows uneven tire wear, loose steering, or clunking from the front suspension, replacing worn lower control arms and associated linkages can return predictable handling. This complete kit bundles both driver and passenger side lower control arms with sway bar end links and outer tie rod ends so you can refresh the key front suspension components in one service session.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included and why does this matter?\u003c\/h3\u003e\n\u003cp\u003eThis kit contains one front driver-side lower control arm assembly, one front passenger-side lower control arm assembly, two front stabilizer (sway bar) end links, and two front outer tie rod ends. Having all these components together helps correct play at multiple front suspension joints that commonly fail with age.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo lower control arms to restore proper wheel alignment pivot points\u003c\/li\u003e\n  \u003cli\u003eTwo outer tie rod ends to tighten steering rack-to-wheel connection\u003c\/li\u003e\n  \u003cli\u003eTwo sway bar end links to reduce body roll and eliminate rattle\u003c\/li\u003e\n  \u003cli\u003eComplete kit simplifies labor and avoids repeat disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and model years will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for specific GM crossover SUVs. Confirm fitment with your VIN or the vehicle year\/model list before purchase to avoid mismatches. Compatibility is crucial because suspension geometry and mounting points vary across model years and trims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuick Enclave: 2008–2017\u003c\/li\u003e\n  \u003cli\u003eChevrolet Traverse: 2009–2017\u003c\/li\u003e\n  \u003cli\u003eGMC Acadia: 2007–2016 (and 2017 Acadia Limited)\u003c\/li\u003e\n  \u003cli\u003eSaturn Outlook: 2007–2010\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality should I expect?\u003c\/h3\u003e\n\u003cp\u003eTadaMark constructs the control arms from high-strength steel and uses durable bushings and ball joints to match OE-style performance. The result is improved stability and longevity compared with worn original components, provided parts are installed correctly and torqued to spec.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel bodies for structural stability\u003c\/li\u003e\n  \u003cli\u003eStamped or forged suspension joints designed to mirror OE fitment\u003c\/li\u003e\n  \u003cli\u003ePre-assembled components where applicable to speed installation\u003c\/li\u003e\n  \u003cli\u003eQuality controls to reduce premature wear and noise\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare for installation and what should I check afterward?\u003c\/h3\u003e\n\u003cp\u003eBefore installation, verify this kit matches your vehicle using AmazonConfirmedFit or by checking OEM part numbers. After installing, always perform a professional wheel alignment and torque all fasteners to manufacturer specifications to ensure safe operation and proper tire wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm fit with VIN or compatibility tool before ordering\u003c\/li\u003e\n  \u003cli\u003eHave a professional mechanic torque fasteners to factory specs\u003c\/li\u003e\n  \u003cli\u003eComplete a wheel alignment after installation\u003c\/li\u003e\n  \u003cli\u003eInspect related suspension components for concurrent wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This TadaMark 6-piece front suspension kit is aimed at owners or mechanics working on mid-size GM crossovers—Buick Enclave, Chevrolet Traverse, GMC Acadia (including the Acadia Limited), and Saturn Outlook—seeking a cost-effective way to replace worn front lower control arms along with tie rod ends and sway bar links. Choose this kit if you want a coordinated replacement set to restore front-end stability and minimize repeat labor, and always confirm compatibility for your exact year and trim.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both left and right control arms?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes one driver-side and one passenger-side lower control arm plus two sway bar end links and two outer tie rod ends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need an alignment after installing this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A professional wheel alignment is recommended after installation to ensure proper tire wear and handling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TadaMark","offers":[{"title":"Default Title","offer_id":67585091207353,"sku":"B0BKKGT7SL","price":354.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tadamark-front-lower-control-arms-kit-front-packaging.jpg?v=1790467007"},{"product_id":"petmigo-front-suspension-10-piece-kit-for-chevy-gmc-cadillac-1500-2007-2014-forged-steel-upper-control-arms-with-preinstalled","title":"PetMigo Front Suspension 10-Piece Kit for Chevy\/GMC\/Cadillac 1500 (2007–2014) — Forged-Steel Upper Control Arms with Preinstalled","description":"\u003cp\u003e\u003cstrong\u003ePetMigo's 10-piece front suspension kit replaces the upper control arms, ball joints, tie rods and stabilizer links to restore steering precision and suspension stability on compatible 2007–2014 GM 1500-series trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete front-end kit is engineered as a direct-replacement solution for select Chevy, GMC and Cadillac 1500 models, giving technicians and DIYers a single-purchase way to refresh worn suspension components. Built from high-strength steel tubing with protective coatings and supplied with preinstalled ball joints and bushings, the assembly is designed to fight corrosion and reduce noise, vibration and harshness. Note: these control arms are made to fit the forged steel suspension variants only—not aluminum or stamped steel configurations.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exact vehicles and part numbers does this PetMigo kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is compatible with a range of 2007–2014 GM 1500 platforms. It was developed to match factory geometry and common OE service part numbers so installation is straightforward when the vehicle has the correct forged-steel front suspension.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Chevy Avalanche 2007–2013 and Silverado 1500 2007–2013\u003c\/li\u003e\n  \u003cli\u003eFits Chevrolet Tahoe and Suburban 1500 (2007–2014)\u003c\/li\u003e\n  \u003cli\u003eFits GMC Sierra 1500 2007–2013, GMC Yukon and Yukon XL 2007–2014, and Cadillac Escalade ESV\/EXT 2007–2014\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers such as 15096197, 15096198, 10393679, 12475478, 15254060, 15254061\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these control arms and joints constructed for durability?\u003c\/h3\u003e\n\u003cp\u003ePetMigo uses high-strength steel tubing and multi-layer coatings to extend component life in road salt and wet conditions. Each control arm assembly arrives with the ball joint and rubber bushings already installed to help maintain proper alignment and reduce service time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel tubing resists bending and fatigue under load\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finishes slow rust for longer service life\u003c\/li\u003e\n  \u003cli\u003ePreinstalled ball joints and bushings ensure consistent fitment and reduced NVH\u003c\/li\u003e\n  \u003cli\u003eTested to industry benchmarks for smooth, stable operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how does the 10-piece kit simplify repairs?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles the common front-end wear items you’d replace together to restore steering response and suspension function. Buying the full set avoids multiple orders, ensures matched components, and reduces downtime during repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2x front upper control arms with preinstalled ball joints\u003c\/li\u003e\n  \u003cli\u003e2x front sway bar stabilizer links\u003c\/li\u003e\n  \u003cli\u003e2x front lower ball joints\u003c\/li\u003e\n  \u003cli\u003e2x front inner tie rod ends\u003c\/li\u003e\n  \u003cli\u003e2x front outer tie rod ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these control arms fit my truck if it has aluminum or stamped-steel components?\u003c\/h3\u003e\n\u003cp\u003eNo—this kit is specifically made for vehicles with forged-steel upper control arms. Aluminum or stamped-steel suspension variants have different dimensions and mounting requirements, so fitment will not be correct on those versions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOnly compatible with forged-steel front upper control-arm applications\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle build or factory parts to confirm material type before ordering\u003c\/li\u003e\n  \u003cli\u003eReference replaced OE part numbers to verify compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: PetMigo’s 10-piece front suspension kit is intended for professional mechanics, collision repair shops and experienced DIY owners who need a comprehensive replacement for worn front-end components on compatible 2007–2014 Chevy, GMC and Cadillac 1500-series trucks and SUVs. It’s ideal when you want matched parts, reduced installation time with preassembled joints and a corrosion-resistant assembly designed to perform in demanding road conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these control arms fit aluminum or stamped-steel suspensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit only fits forged-steel upper control-arm variants, not aluminum or stamped-steel versions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include ball joints and tie rod ends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 10-piece kit includes preinstalled ball joints, sway bar links, lower ball joints, and inner and outer tie rod ends.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PetMigo","offers":[{"title":"Default Title","offer_id":67585092812985,"sku":"B0CBMK2VLJ","price":252.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/petmigo-front-upper-control-arms-kit-front-view.jpg?v=1790467090"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/tiezful-front-lower-control-arms-packaging.jpg?v=1794521474","url":"https:\/\/redleafauto.ca\/collections\/control-arms.oembed?page=3","provider":"Redleaf Auto","version":"1.0","type":"link"}