{"title":"DAYUAN","description":"\u003cp\u003eBrowse 38 DAYUAN products at RedLeaf Auto, including engine tools, steering \u0026amp; suspension tools and pullers \u0026amp; extractors. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"dayuan-oxygen-sensor-socket-set-21-piece-black-oxide-kit-with-low-profile-22mm-extended-sockets","title":"DAYUAN Oxygen Sensor Socket Set — 21-Piece Black Oxide Kit with Low-Profile 22mm \u0026 Extended Sockets","description":"\u003cstrong\u003eDAYUAN 21Pcs Oxygen Sensor Socket Set is a complete, heavy-duty tool kit designed for removing and installing oxygen sensors, oil pressure sending units, and related threaded sensors without rounding or damaging fittings.\u003c\/strong\u003e\n\n\u003cp\u003eThis 21-piece set brings extended and reinforced sockets, both 6-point and 12-point designs, and a short low-profile 7\/8\" (22mm) O2 socket so you can tackle hard-to-reach sensors on cars, trucks, and light commercial vehicles. Constructed from chrome vanadium steel with a black oxide finish and packed in a molded storage case, the kit balances strength, corrosion resistance, and organized portability for professional mechanics and DIY enthusiasts alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this set make removing stubborn oxygen sensors easier?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes extended bodies and reinforced socket walls to reduce slippage and prevent rounding of sensor hexes. A selection of 6-point and 12-point sockets fits common sensor shapes and gives you the right engagement for tight clearances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended socket lengths for deep-recessed sensors\u003c\/li\u003e\n  \u003cli\u003eReinforced construction to resist deformation under torque\u003c\/li\u003e\n  \u003cli\u003e6-point sockets for maximum contact and 12-point for limited access\u003c\/li\u003e\n  \u003cli\u003eShort low-profile 7\/8\" (22mm) O2 socket for confined spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these tools for oil pressure sending units and injectors?\u003c\/h3\u003e\n\u003cp\u003eYes — the set is designed to handle oil pressure sending units, vacuum switches, fuel injectors, and other threaded sensors. The variety of socket sizes and drive adapters lets you adapt to different sensor geometries and vehicle requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDedicated sockets for oil pressure sending units and switches\u003c\/li\u003e\n  \u003cli\u003eCompatible with common injector and thermal switch sizes\u003c\/li\u003e\n  \u003cli\u003eIncluded drive adapters expand compatibility with ratchets and extensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish protect the tools from wear and corrosion?\u003c\/h3\u003e\n\u003cp\u003eEach piece is forged from chrome vanadium steel for high strength and durability under repeated torque. A black oxide finish helps prevent surface rust while maintaining a professional appearance and lowering long-term maintenance needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength chrome vanadium construction\u003c\/li\u003e\n  \u003cli\u003eBlack oxide treatment for rust resistance\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined sockets for consistent fit and wear resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the set organized for storage and transport?\u003c\/h3\u003e\n\u003cp\u003eThe set ships in a blow-molded carrying case with precision-cut compartments for each socket and accessory. That organization keeps parts protected, speeds tool selection during jobs, and reduces wear by preventing loose pieces from striking each other.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom-molded case with labeled compartments\u003c\/li\u003e\n  \u003cli\u003eSecure clasping and a compact footprint for garage or truck use\u003c\/li\u003e\n  \u003cli\u003eAll 21 pieces stay organized and easy to inventory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN 21-piece kit suits professional technicians, mobile mechanics, and home mechanics who frequently service oxygen sensors, pressure senders, injectors, or thermal switches. It is especially useful when sensors are recessed or obstructed by tight engine bay geometry, or when you want a single compact kit that covers most common sensor sizes with reliable, long-lasting tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this set include a 22mm oxygen sensor socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it includes a short low-profile 7\/8\" (22mm) oxygen sensor socket for tight spaces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the sockets corrosion-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The sockets are made from chrome vanadium steel with a black oxide finish to resist rust.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67584897941689,"sku":"B0D6RDF7DD","price":208.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging.jpg?v=1790458196"},{"product_id":"dayuan-bearing-press-pull-sleeve-tool-kit-20-sleeve-4-spindle-heat-treated-steel-34-72mm","title":"DAYUAN Bearing Press \u0026 Pull Sleeve Tool Kit — 20‑Sleeve, 4‑Spindle Heat‑Treated Steel (34–72mm)","description":"\u003cp\u003e\u003cstrong\u003eThe DAYUAN Universal Press Pull Sleeve Remove Install Bushes Bearings Tool Kit is a heavy-duty 20-sleeve and 4-spindle set designed to remove and press-fit bearings, bushes and seals safely without damaging housings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis comprehensive kit equips home mechanics and professional technicians with a range of concentric press sleeves and threaded pulling spindles so you can extract or install components across many cars, light commercial vehicles and heavier engines. Constructed from drop-forged, heat-treated steel, the set covers inside diameters from 34 mm to 72 mm in 2 mm increments and outer diameters from 44 mm to 82 mm in 2 mm steps. It’s intended to reduce the risk of scoring or distorting suspension or bearing housings while offering durable, repeatable performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit protect bearings and housings during removal?\u003c\/h3\u003e\n\u003cp\u003eThe system uses matched sleeves and spindles so force is applied evenly around the part, limiting localized stress that causes damage. Pulling and pressing with the correct sleeve size keeps the bearing or bush aligned and reduces the chance of bending or deformation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20 press sleeves sized in 2 mm increments for precise fit.\u003c\/li\u003e\n  \u003cli\u003eSpindles and thrust bearings prevent thread damage and allow smooth extraction.\u003c\/li\u003e\n  \u003cli\u003eEven radial pressure reduces housing scoring and misalignment.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated steel withstands repeated heavy use without deforming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and what sizes do they cover?\u003c\/h3\u003e\n\u003cp\u003eThe kit comes complete with a range of concentric sleeves plus four threaded pulling spindles and matching nuts and thrust bearings. Inside diameters span 34–72 mm and outside diameters span 44–82 mm, both stepped by 2 mm increments for broad compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20 press sleeves: ID 34–72 mm (2 mm steps), OD 44–82 mm (2 mm steps).\u003c\/li\u003e\n  \u003cli\u003e4 pulling spindles with nuts and thrust bearings: M10, M12, M14, M16.\u003c\/li\u003e\n  \u003cli\u003ePacked to tackle many car, LCV and heavier engine applications.\u003c\/li\u003e\n  \u003cli\u003eDurable finish for corrosion resistance and workshop longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the set safely and effectively in my workshop?\u003c\/h3\u003e\n\u003cp\u003eSelect the sleeve that closely matches the bearing or bush diameter, assemble the spindle with the appropriate thrust bearing and nut, and apply steady mechanical force using a press, vise or wrench. Use protective eyewear and gloves and follow safe workshop practices when applying high force.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch sleeve ID to the component inner diameter for proper support.\u003c\/li\u003e\n  \u003cli\u003eUse the correct spindle thread size (M10–M16) with supplied nuts.\u003c\/li\u003e\n  \u003cli\u003eApply steady pressing or pulling force with a press or suitable tool.\u003c\/li\u003e\n  \u003cli\u003eWear safety glasses and gloves to guard against flying debris or contact injuries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit work on modern passenger cars and heavier vehicles?\u003c\/h3\u003e\n\u003cp\u003eYes — the sleeves’ range and the variety of spindle sizes make the kit suitable for most passenger cars, light commercial vehicles and many heavier engines where bush or bearing servicing is required. It’s a versatile addition to general service and suspension repair toolboxes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many cars, LCVs and HGV engine applications.\u003c\/li\u003e\n  \u003cli\u003eMultiple sleeve sizes accommodate common and less common diameters.\u003c\/li\u003e\n  \u003cli\u003eRobust construction suited to workshop and mobile service environments.\u003c\/li\u003e\n  \u003cli\u003eReduces need for multiple brand-specific pullers and presses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN Universal Press Pull Sleeve Kit is aimed at professional mechanics, fleet maintenance teams and experienced DIYers who perform bearing, bush and seal servicing. If you routinely remove or install cylindrical components and need a durable, size-flexible system that minimizes component and housing damage, this set delivers the range and strength required. Always follow safe operating practices and use the kit with appropriate presses or supports to maximize lifespan and protect parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What sizes do the press sleeves cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sleeves cover inside diameters 34–72 mm and outside diameters 44–82 mm in 2 mm steps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which spindle threads are included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The set includes four pulling spindles with nuts and thrust bearings: M10, M12, M14 and M16.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67584905052345,"sku":"B07ML8N9X5","price":336.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging-tool-kit.jpg?v=1790458514"},{"product_id":"dayuan-28-piece-pull-press-sleeve-kit-34-72mm-40cr-steel-black-oxide-case","title":"DAYUAN 28-Piece Pull \u0026 Press Sleeve Kit — 34–72mm \/ 40Cr Steel, Black Oxide Case","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN's 28-piece pull and press sleeve kit is a complete steel set for safely removing and installing bushes, bearings, and seals across heavy and light commercial vehicle engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit combines a range of matching inner and outer sleeves, high-strength 40Cr steel components, and a molded carry case so you can service suspension and engine housings without resorting to improvised tools. The sleeves are coated for corrosion resistance and sized in 2 mm increments to handle a wide span of diameters, giving mechanics and DIYers a reliable, reusable way to press fit or extract components while minimizing damage to surrounding parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the kit protect bearings and housings during removal?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses matched inner and outer sleeves to distribute force evenly and prevent concentrated loading that can deform flanges or housings. By pressing or pulling through a correct-size sleeve, the tool avoids direct hammering on the bearing surface, reducing risk of scratches or cracks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatched inside\/outside sleeve pairs reduce point loading\u003c\/li\u003e\n  \u003cli\u003e40Cr steel construction resists bending under pressure\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish adds corrosion protection\u003c\/li\u003e\n  \u003cli\u003eSizes available in 2 mm steps for precise fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes are included and which vehicles will they fit?\u003c\/h3\u003e\n\u003cp\u003eThe set covers a broad size range to suit many heavy goods vehicles (HGV), light commercial vehicles (LCV) and passenger car repair tasks. Inner diameters run from 34 mm to 72 mm, and corresponding outer diameters range from 44 mm to 82 mm, both in 2 mm increments for accurate selection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameters: 34–72 mm in 2 mm steps\u003c\/li\u003e\n  \u003cli\u003eOuter diameters: 44–82 mm in 2 mm steps\u003c\/li\u003e\n  \u003cli\u003e28 pieces include multiple sleeve sizes and adaptors for common applications\u003c\/li\u003e\n  \u003cli\u003eDesigned for a range of wrenches and drivers used in vehicle service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality should I expect?\u003c\/h3\u003e\n\u003cp\u003eComponents are forged from 40Cr steel—a hardened alloy known for strength and wear resistance—then given a black oxide coating to inhibit rust and extend service life. The result is a durable kit suited for repeated pressing and extraction jobs without rapid wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e40Cr alloy for high load-bearing capacity\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish to reduce oxidation\u003c\/li\u003e\n  \u003cli\u003ePrecisely machined sleeve edges for smooth operation\u003c\/li\u003e\n  \u003cli\u003eSturdy blow-molded case protects tools and aids organization\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I store and transport the kit between jobs?\u003c\/h3\u003e\n\u003cp\u003eAll parts come organized in a custom blow-molded carrying case sized to keep sleeves and adaptors separated and secure. The case reduces the chance of losing small pieces and protects finished surfaces from knocks while you move between the workshop and the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom-molded slots for each sleeve and adaptor\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits on a service bench or in a van\u003c\/li\u003e\n  \u003cli\u003eDurable external shell resists spills and impacts\u003c\/li\u003e\n  \u003cli\u003eEasy visual inventory before and after jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The DAYUAN 28-piece pull and press sleeve kit is aimed at professional mechanics, fleet maintenance teams, and experienced DIYers who work on HGVs, LCVs, and many passenger vehicles. If you need a reliable way to remove or install bushes, bearings, and seals without damaging housings—whether in a shop bay or on-site—this kit supplies a wide size range, robust materials, and practical storage to streamline the job.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit handle both removal and installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the matched inner and outer sleeves are designed for both pressing in and pulling out bushes, bearings, and seals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the material rust-resistant for workshop use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The components are 40Cr steel with a black oxide coating to reduce oxidation and extend service life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67585015316665,"sku":"B07SQZTR77","price":238.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging_5ea25239-bfdf-4fa0-a598-f44c446b51d2.jpg?v=1790463513"},{"product_id":"dayuan-pneumatic-diesel-injector-puller-kit-28-piece-air-vibration-tool-19-adapters-3-hooks-72-116-psi","title":"DAYUAN Pneumatic Diesel Injector Puller Kit 28‑Piece — Air Vibration Tool, 19 Adapters \u0026 3 Hooks (72–116 psi)","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN's 28-piece pneumatic diesel injector puller kit is an air-powered removal set designed to extract tight or seized common-rail injectors quickly using vibration and puller adapters.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis professional-grade kit combines an air vibration tool, a selection of adapters, and puller hooks to tackle stuck injectors on engines fitted with Bosch, Delphi, and Siemens common-rail systems. The tool converts compressed air into controlled vibrations and delivers 20–30 Nm of torque at recommended working pressures, helping free injectors without damaging the housing or surrounding components when used correctly. The set is organized to cover solenoid and screw-style connections and comes with everything needed for a single-operator extraction job.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit free a stuck diesel injector?\u003c\/h3\u003e\n\u003cp\u003eThe pneumatic tool generates rapid vibration at the injector seating while applying rotational torque, breaking up corrosion, carbon, and deposits that bind the injector in the bore. Vibration reduces friction and mechanical resistance so the included puller hooks can lift the injector out smoothly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAir-powered vibration combined with 20–30 Nm torque for controlled extraction.\u003c\/li\u003e\n  \u003cli\u003eWorking pressure 72–116 psi (5–8 bar) matches common shop compressors.\u003c\/li\u003e\n  \u003cli\u003eThree puller hooks allow direct mechanical lifting once the injector is loosened.\u003c\/li\u003e\n  \u003cli\u003eAdapters match solenoid and screw-style common-rail injector fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich injectors and vehicles will these adapters fit?\u003c\/h3\u003e\n\u003cp\u003eThe adapter assortment is intended for many Bosch, Delphi and Siemens common-rail injectors, covering popular solenoid and screw-connection types. It won’t fit every model, so confirm the adapter shape and thread with your injector before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e19 adapters provide a wide range of contact faces and thread fits.\u003c\/li\u003e\n  \u003cli\u003eSuitable for most common-rail diesel injectors from Bosch, Delphi, Siemens.\u003c\/li\u003e\n  \u003cli\u003eAdapters handle both solenoid-style and screw-connection injectors.\u003c\/li\u003e\n  \u003cli\u003eInspect adapter-to-injector contact to avoid mismatches or slippage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key kit components and technical specs?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the air vibration tool plus hose and fittings, a broad adapter set, and three puller hooks to complete typical removal jobs. The tool operates at 72–116 psi and produces enough torque and vibration for stubborn injectors without requiring excessive force.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1× air vibration tool, 1× air hose, 1× air plug for immediate setup.\u003c\/li\u003e\n  \u003cli\u003e19× adapters to cover many injector types and 3× puller hooks included.\u003c\/li\u003e\n  \u003cli\u003eOperational pressure 72–116 psi (5–8 bar); torque output around 20–30 Nm.\u003c\/li\u003e\n  \u003cli\u003eDesigned to work with standard shop compressors and fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use the tool safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eUse recommended air pressure and correct adapter match to avoid damaging injectors or bores. Secure the surrounding area, follow torque guidelines, and remove injectors with steady upward motion once vibration has loosened them.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSet compressor to 72–116 psi before operating the vibration tool.\u003c\/li\u003e\n  \u003cli\u003eSelect an adapter that seats snugly against the injector connection.\u003c\/li\u003e\n  \u003cli\u003eApply vibration and controlled torque; then lift with a puller hook.\u003c\/li\u003e\n  \u003cli\u003eWear eye and hand protection and keep work area clean of debris.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? The DAYUAN 28-piece pneumatic injector puller is aimed at professional mechanics, fleet maintenance technicians, and experienced DIYers who service diesel common-rail engines. It’s most useful where injectors are corroded, carbon-seized, or otherwise difficult to extract using standard hand tools. If you require broad adapter coverage and an air-powered method to minimize force on the injector bore, this kit supplies the components and performance needed for reliable removal jobs. Always verify adapter compatibility with your injector model and follow safe shop practices during use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit work with Bosch common-rail injectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the adapter set includes fittings compatible with many Bosch common-rail injectors; verify adapter shape before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What air pressure does the tool require?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Operate the tool between 72–116 psi (5–8 bar) for optimal vibration and torque.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67585493958841,"sku":"B0CPDRPJP8","price":281.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging-injector-puller-kit.jpg?v=1790471601"},{"product_id":"dayuan-pneumatic-cv-joint-boot-expander-20-115mm-air-powered-installation-tool-1-4-bsp-110-psi-max","title":"DAYUAN Pneumatic CV Joint Boot Expander 20–115mm — Air-powered installation tool, 1\/4\" BSP, 110 psi max","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN Pneumatic Air Power CV Joint Boot Expander is an air-operated tool that stretches flexible rubber CV and steering boots onto drive-shaft assemblies quickly and consistently.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis specialized pneumatic expander is built to simplify fitting rubber CV and steering boots, reducing manual fumbling and potential damage to flexible materials. Designed for use with rubber boots 20–115 mm in diameter, the tool uses expanding fingers actuated by an air valve to hold the boot open while it is slid over the joint. It is compact, threaded to accept a 1\/4 inch BSP connector and intended specifically for pliable rubber boots—not hard PVC or brittle plastics.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DAYUAN expander work and what are the basic steps?\u003c\/h3\u003e\n\u003cp\u003eThe tool uses pneumatically driven fingers to widen the boot’s small opening so the boot can be slipped over a driveshaft or CV joint. Operation requires a standard compressed air source, lubrication on the boot, and simple valve activation to expand and release the fingers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLubricate the boot lip and place it over the expander fingers.\u003c\/li\u003e\n  \u003cli\u003eConnect to an air supply (max safe pressure 110 psi) via 1\/4\" BSP thread.\u003c\/li\u003e\n  \u003cli\u003eActivate the air valve to open fingers, slide boot over the joint, then release air to close fingers.\u003c\/li\u003e\n  \u003cli\u003eDisconnect the tool from the air supply when finished for safety and storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat boots and vehicle types is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis expander is made for flexible rubber CV and steering boots found on many passenger and light commercial vehicles. It is not suitable for hard plastic (PVC) boots or boots whose small opening cannot be opened manually prior to use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable diameter range: 20–115 mm.\u003c\/li\u003e\n  \u003cli\u003eWorks with universal and OEM-style rubber boots.\u003c\/li\u003e\n  \u003cli\u003eNot for plastic or very stiff-surfaced boots.\u003c\/li\u003e\n  \u003cli\u003eIntended for automotive drive-shaft and steering boot installations only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat air supply and safety limits should I follow?\u003c\/h3\u003e\n\u003cp\u003eOperate the DAYUAN expander from a regulated compressed air source and never exceed the maximum safe pressure. If your air line can exceed 110 psi, fit a regulator and always disconnect after use to prevent accidental actuation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum safe operating pressure: 110 psi (7.6 bar).\u003c\/li\u003e\n  \u003cli\u003eTool body accepts 1\/4\" BSP connector; air adaptor exchangeable if needed.\u003c\/li\u003e\n  \u003cli\u003eInstall a regulator if your compressor exceeds the safe limit.\u003c\/li\u003e\n  \u003cli\u003eDisconnect air supply when tool is not in use for safe storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain and get the best results from the tool?\u003c\/h3\u003e\n\u003cp\u003eKeep moving parts clean and lightly lubricated and use a suitable installation lubricant on the boot itself. Regularly inspect the expander fingers for wear and ensure the threaded connection and valve are secure to avoid leaks or uneven expansion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean dirt and grease from the expander after each session.\u003c\/li\u003e\n  \u003cli\u003eCheck fingers for deformation and replace if worn or damaged.\u003c\/li\u003e\n  \u003cli\u003eUse a compatible lubricant on boot lip to ease installation.\u003c\/li\u003e\n  \u003cli\u003eStore disconnected and dry to prolong component life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN Pneumatic Air Power CV Joint Boot Expander suits professional mechanics, independent garage owners and DIY enthusiasts who regularly fit rubber CV or steering boots and want a faster, more controlled installation than manual stretching allows. It provides consistent expansion across boot sizes from 20 to 115 mm, saving time in workshops where multiple fittings are routine. Avoid use if your boot material is rigid or the boot’s small hole cannot be opened by hand; otherwise this tool delivers a reliable air-powered alternative to hand tools for rubber automotive boots.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this tool on plastic (PVC) CV boots?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The DAYUAN expander is designed for flexible rubber boots only and will not work with hard plastic or PVC boots.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What air pressure should I use with the tool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use regulated compressed air up to 110 psi maximum; fit a regulator if your compressor can exceed this limit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67585879998649,"sku":"B0BZNZRDGJ","price":131.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-cv-boot-expander-front-view.jpg?v=1790479151"},{"product_id":"dayuan-52-in-1-bushing-driver-set-50-discs-long-shaft-carbon-steel-bearing-seal-press-kit","title":"DAYUAN 52-in-1 Bushing Driver Set — 50 Discs, Long Shaft, Carbon Steel Bearing \u0026 Seal Press Kit","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN 52-in-1 Custom Bushing Driver Set is a complete bearing and seal driver kit designed to remove and install wheel bearings, seals, and bushings with interchangeable discs for precise fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, heavy-duty press kit brings professional-style bearing and seal work to your garage or workshop. The set includes 50 size-specific discs, a long handle shaft with mounting hardware, and a molded carrying case so you can tackle axle, hub, transmission, and suspension bushing jobs without sourcing individual tools. Built from carbon steel with black anodic protection, the kit resists corrosion and stands up to repeated impact during press or removal operations.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this driver set make bearing replacement easier?\u003c\/h3\u003e\n\u003cp\u003eThe kit’s interchangeable discs let you match the exact diameter of the bearing race or seal to apply even pressure during installation or removal. A long, threaded shaft and sturdy handle transmit force straight through the disc to avoid misalignment and damage. The included case keeps components organized so you can work faster and avoid searching for parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50 discs from 0.7\" to 2.55\" in ~1mm increments plus a 2.9\" option\u003c\/li\u003e\n  \u003cli\u003e0.47\" shaft diameter with screw-on handle for controlled pressure\u003c\/li\u003e\n  \u003cli\u003eIllustrated parts diagram for quick setup and part identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these sizes fit my car, truck, or ATV bearings?\u003c\/h3\u003e\n\u003cp\u003eThe wide range of discs covers many common bearing race and seal diameters used in cars, trucks, motorcycles, and utility vehicles. Interchangeable discs create thousands of possible diameter combinations, so you're likely to find a match without buying multiple single-size drivers. For uncommon or specialty bearings, the modular design still lets you create a custom fit from two or more discs paired on the shaft.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisc range spans small seals to larger wheel bearings\u003c\/li\u003e\n  \u003cli\u003e2,450+ theoretical combinations using disc interchangeability\u003c\/li\u003e\n  \u003cli\u003eSuitable for passenger vehicles, light trucks, ATVs, and trailers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the DAYUAN bushing driver set?\u003c\/h3\u003e\n\u003cp\u003eConstructed from heavy-duty carbon steel with a protective black anodic finish, the components resist rust and handle repeated hammering or pressing. The long handle provides leverage while reducing wobble, and the discs’ stepped profiles distribute force away from fragile sealing lips. The molded case protects parts when stored or transported, preserving alignment accuracy over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon steel construction for impact resistance\u003c\/li\u003e\n  \u003cli\u003eBlack anodic oxidation for corrosion protection\u003c\/li\u003e\n  \u003cli\u003eBlow-molded case for secure storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how do I get started?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships complete with 50 bushing discs, the long handle shaft, connecting screw assembly, and an illustrated parts diagram. Setup is straightforward: choose the disc matching the bearing or seal, assemble it on the shaft, center the tool, and apply steady force to press or extract the component. The diagram helps you identify disc sizes quickly so you can begin work without delay.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50pcs interchangeable discs, 1 long handle shaft, and assembly hardware\u003c\/li\u003e\n  \u003cli\u003eIllustrated parts diagram included in the case\u003c\/li\u003e\n  \u003cli\u003ePackaged in a heavy-duty blow-molded carrying case\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN 52-in-1 Custom Bushing Driver Set is targeted at DIY mechanics, weekend off-roaders, and professional technicians who need a versatile, durable press kit for bearings and seals. If you service wheel hubs, transmissions, axles, or suspension components and want a single kit that minimizes part hunting and reduces risk of damage during installation, this set provides a practical, long-lasting solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this set handle both bearing removal and installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The interchangeable discs and long shaft let you press bearings out and install them with even pressure to minimize damage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the kit compatible with light truck and ATV bearings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The wide disc range and modular combinations cover most passenger vehicles, light trucks, and many ATV applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67585927250105,"sku":"B08954GW18","price":162.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging_88f1833f-85c5-4f31-948e-67aef5a3b84d.jpg?v=1790480129"},{"product_id":"dayuan-radiator-pressure-tester-kit-28-piece-universal-set-0-35-psi-color-coded-adapters","title":"DAYUAN Radiator Pressure Tester Kit 28-Piece Universal Set — 0–35 PSI, Color-Coded Adapters","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN 28-piece Radiator Pressure Tester Kit is a complete universal set for checking cooling-system leaks, testing radiator caps, and vacuum-purging and refilling coolant on most passenger vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional-grade kit combines a hand pump, dual vacuum purge and refill tools, a range of radiator cap adapters, and chrome steel fittings so you can diagnose pressure leaks and service coolant circuits without repeatedly buying special adapters. The kit covers common domestic and European makes, supports 0–35 psi testing range, and organizes adapters by color for fast selection.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use this kit to find a radiator leak?\u003c\/h3\u003e\n\u003cp\u003eAttach the correct cap adapter to the radiator neck, connect the hand pump and build pressure up to the vehicle's specified test value. Inspect hoses, radiator core, heater connections and the water pump area for escaping coolant or air bubbles while under pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelect the color-coded adapter that fits the radiator opening.\u003c\/li\u003e\n  \u003cli\u003eUse the hand pump to pressurize to the recommended psi (0–35 psi range).\u003c\/li\u003e\n  \u003cli\u003eVisually check for wet spots, drips, or bubbles; listen for hissing leaks.\u003c\/li\u003e\n  \u003cli\u003eIf no external leak appears, consider pressure-testing the cap with included cap adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and why does each matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit has 28 pieces that provide broad compatibility and practical functionality: a hand pressure pump, multiple radiator adapters, two vacuum purge and refill tools, test cap adapters, and an adapter spanner. Each component lets you perform a specific test or fluid-change task without modifying the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand pressure pump — creates stable pressure to reveal leaks.\u003c\/li\u003e\n  \u003cli\u003eUniversal radiator adapters — fit many neck sizes and vehicle brands.\u003c\/li\u003e\n  \u003cli\u003eVacuum purge\/refill tools — remove air and refill coolant cleanly.\u003c\/li\u003e\n  \u003cli\u003eRadiator cap test adapters and spanner — validate cap seal performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and systems will this toolbox work with?\u003c\/h3\u003e\n\u003cp\u003eDAYUAN designed the adapter assortment to cover a wide range of passenger cars and light trucks including many European and Asian makes. The 0–35 psi capacity and varied fittings match most radiator necks, expansion tanks and pressure caps used by common manufacturers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with brands such as Mercedes-Benz, Audi, BMW and VW.\u003c\/li\u003e\n  \u003cli\u003eAlso works on Ford, Toyota, Chevrolet, Kia and many others.\u003c\/li\u003e\n  \u003cli\u003eFits both radiator necks and separate coolant reservoirs with proper adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for?\u003c\/p\u003e\n\u003cp\u003eThis DAYUAN kit suits home mechanics, DIY car owners, mobile technicians and small repair shops that need a single, portable set for cooling-system diagnostics and coolant service. If you perform routine maintenance, diagnose intermittent coolant loss, or need to vacuum and refill systems without air pockets, this kit provides the adapters and tools to do those jobs efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit test radiator caps and reservoirs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes radiator cap test adapters and universal fittings for both radiator necks and expansion tanks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure range can the hand pump produce?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hand pump supports testing up to 35 psi, covering most passenger vehicle requirements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67586384822457,"sku":"B078RJT13X","price":165.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging-radiator-tester.jpg?v=1790482445"},{"product_id":"dayuan-front-wheel-drive-bearing-removal-tool-kit-23-piece-fwd-press-pull-set-32-38mm-shaft-fit-carbon-steel","title":"DAYUAN Front Wheel Drive Bearing Removal Tool Kit — 23-Piece FWD Press \u0026 Pull Set, 32\/38mm Shaft Fit, Carbon Steel","description":"\u003cstrong\u003eDAYUAN 23-piece FWD Front Wheel Drive Bearing Removal Tool is a complete press-and-pull kit built to remove and install front-wheel-drive wheel bearings without disassembling the knuckle.\u003c\/strong\u003e\n\n\u003cp\u003eThis heavy-duty bearing press set gives professional mechanics and DIYers a ready-made solution for extracting and seating wheel bearings on front-wheel-drive cars and light trucks. The kit combines a range of bushings, sleeves, plates and fasteners sized to fit common hub diameters so you can press bearings in and out while the steering knuckle and strut remain assembled.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit reduce the risk of hub and bearing damage?\u003c\/h3\u003e\n\u003cp\u003eThe set lets you apply even pressure during removal and installation, avoiding hammer blows or improvised tools that can warp hubs or ruin bearing bores. Using matched bushings and sleeves centers the bearing on the drive shaft, keeping force axial and controlled.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12 precision-fit bushings prevent misalignment during pressing.\u003c\/li\u003e\n  \u003cli\u003eFour sleeves and two sleeve plates distribute load across a broad surface.\u003c\/li\u003e\n  \u003cli\u003eRobust screw and nut create steady, adjustable compression.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and bearing sizes will this 23-piece kit work with?\u003c\/h3\u003e\n\u003cp\u003eThe DAYUAN kit targets front-wheel-drive passenger cars and many light trucks, plus it can handle some larger industrial bearings where fitment matches the included diameters. Sizes cover a common range of hub bores and outer races used in FWD applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrive shaft compatibility at 32mm and 38mm diameters.\u003c\/li\u003e\n  \u003cli\u003eBushing diameters from approximately 2.2\" up through 3.45\" to match various hub sizes.\u003c\/li\u003e\n  \u003cli\u003eMultiple sleeve outer diameters and lengths to adapt to different bearing widths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and features make this kit durable and user-friendly?\u003c\/h3\u003e\n\u003cp\u003eComponents are made from carbon steel with a protective black anodic-oxidation style finish for improved rust resistance and long life in a garage environment. A molded plastic case keeps parts organized and shields them from moisture and impact while transporting between jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty carbon steel construction for strength under press loads.\u003c\/li\u003e\n  \u003cli\u003eProtective coating to reduce corrosion during storage and use.\u003c\/li\u003e\n  \u003cli\u003eCompact, heavy-duty plastic case for organized storage and mobility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use this set during a bearing service?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for in-place bearing service so you typically won't need to disassemble the knuckle or remove struts, speeding up the job and lowering labor complexity. The sliding screw and matching nut give you controllable, gradual pressure to avoid sudden movements that could damage components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAllows bearing replacement with steering knuckle and strut intact in many cases.\u003c\/li\u003e\n  \u003cli\u003eSliding screw dimensions (approx. 7.5\" long, 0.75\" diameter) for strong leverage and clearance.\u003c\/li\u003e\n  \u003cli\u003eWasher and sleeve plate options let you adapt contact surfaces for safe press operations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN 23-piece bearing removal and installer set is aimed at independent mechanics, small-shop technicians, and committed DIYers who service front-wheel-drive vehicles and want a reliable, reusable toolset. It’s especially useful if you prefer pressing bearings in-place to avoid time-consuming disassembly or when you work on a variety of hub sizes and need a compact, organized kit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this kit without removing the steering knuckle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit is designed to press bearings while the knuckle and strut remain assembled in many FWD applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the set fit large industrial bearings as well?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It can handle some larger industrial bearings if the included bushings and sleeves match the bearing dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67586521891001,"sku":"B075N1FRDL","price":181.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging-case.jpg?v=1790485576"},{"product_id":"dayuan-bushing-bearing-driver-set-52-in-1-50-discs-long-handle-shaft-carbon-steel-case","title":"DAYUAN Bushing \u0026 Bearing Driver Set 52-in-1 — 50 Discs, Long-Handle Shaft, Carbon Steel Case","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN 52-in-1 Custom Bushing Driver Set is a complete bearing and seal press kit that lets you remove and install wheel bearings, seals, and bushings precisely using 50 interchangeable discs and a long handle shaft.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional-grade installer kit is built to cover a wide range of automotive sizes and tasks, from axle and hub bearings to transmission seals. The set combines a broad size range of discs, a sturdy handle and shaft assembly, and a molded storage case so technicians and home mechanics can work faster and cleaner without improvising adapters.\u003c\/p\u003e\n\n\u003ch3\u003eWhat sizes and combinations can I create with the DAYUAN driver discs?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes 50 interchangeable discs that span multiple diameters, enabling many fit combinations for different bearings and seals. Discs range in small, precise increments so you can match the part surface closely and avoid damaging races or housings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e50 discs covering diameters from approximately 0.7\" to 2.55\" in 1 mm steps plus a larger 2.9\" disc\u003c\/li\u003e\n  \u003cli\u003eDiscs connect to a 0.47\" shaft and secure with a screw for rigid assembly\u003c\/li\u003e\n  \u003cli\u003e2,450+ theoretical disc combinations when stacking\/interchanging discs for exact fits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the DAYUAN bushing and bearing installer?\u003c\/h3\u003e\n\n\u003cp\u003eComponents are made from heavy-duty carbon steel with a black anodized finish to resist rust and endure shop conditions. The construction is designed to take repeated impacts and leverage common to bearing and seal work without bending or stripping threads.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCarbon steel parts for high strength during press and removal operations\u003c\/li\u003e\n  \u003cli\u003eBlack anodic oxidation adds corrosion resistance to extend tool life\u003c\/li\u003e\n  \u003cli\u003eRobust long-handle shaft for controlled force and leverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit make bearing removal and installation easier?\u003c\/h3\u003e\n\n\u003cp\u003eThe organized set gives you the right face for the bearing or seal so force is applied evenly, reducing damage risk and saving time. A long handle and secure shafting let one person perform many press tasks that might otherwise require a hydraulic press or improvised tooling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMultiple disc sizes let you match contact surfaces for even pressure\u003c\/li\u003e\n  \u003cli\u003eLong handle shaft improves control when driving bearings or seals\u003c\/li\u003e\n  \u003cli\u003eIncludes assemblies and simple illustrated diagram for quick setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the case and how portable is the kit?\u003c\/h3\u003e\n\n\u003cp\u003eEverything ships in a blow-molded storage case with fitted compartments so components stay organized and are easy to transport between jobs. The case protects parts from dirt and keeps the set ready for roadside or shop use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e50 bushing discs, long handle shaft, screw and necessary assemblies\u003c\/li\u003e\n  \u003cli\u003eIllustrated parts diagram included for fast identification and assembly\u003c\/li\u003e\n  \u003cli\u003eBlow-molded case for secure storage and easy transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN 52-in-1 Custom Bushing Driver Set suits DIY mechanics, mobile technicians, and professional shops that need a versatile, durable kit for wheel bearings, seals, and small bushings. If you work on cars, trucks, transmissions, wheel hubs or axles and want to avoid guesswork or makeshift tools, this set supplies the common sizes, a sturdy shaft, and a protective case to streamline repair jobs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this set press both bearings and seals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The interchangeable discs and long handle shaft let you install and remove many wheel bearings and seals safely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the material rust-resistant for shop use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Components are carbon steel with a black anodized finish to improve corrosion resistance and longevity.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67586715943097,"sku":"B09D9X13BV","price":162.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging-case-open.jpg?v=1790491183"},{"product_id":"dayuan-coil-spring-compressor-set-telescopic-universal-1250kg-120-325mm-travel","title":"DAYUAN Coil Spring Compressor Set — Telescopic Universal 1250kg, 120–325mm Travel","description":"\u003cstrong\u003eDAYUAN Suspension Coil Spring Compressor Repair Tools Set is a telescopic, universal spring-compression kit designed to remove and install coil springs safely on many modern vehicles without dismantling the axle.\u003c\/strong\u003e\n\n\u003cp\u003eThis heavy-duty kit combines a telescopic compressor bar, two pairs of three-pronged spring clamps, and two sizes of pressure plates to handle a wide range of coil spring diameters and vehicle models. Built to workshop standards, the set supports professional mechanics and home enthusiasts by reducing labor time when servicing MacPherson struts, wishbone assemblies and many multi-link independent suspensions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and spring sizes does this kit work with?\u003c\/h3\u003e\n\u003cp\u003eThe DAYUAN set covers a broad list of passenger cars and light commercial vehicles thanks to its two pressure plate sizes and adjustable jaw range. It fits coil springs from approximately 80 mm to 135 mm in diameter, and the jaw opening accommodates 115–300 mm overall.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLarge plate fits many Mercedes front (W123, W124, W202, W210) and rear axle applications plus some Saab, Ford and Skoda models.\u003c\/li\u003e\n  \u003cli\u003eSmall plate list includes Mercedes W126\/W140 and many models from GM, Opel, Peugeot (406, 605), Rover, Hyundai, Saab, Volvo, Volkswagen, Fiat, Mazda, Toyota, Nissan, Mitsubishi and Lada.\u003c\/li\u003e\n  \u003cli\u003eTelescopic range and clamp geometry adapt to most modern MacPherson and multi-link setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much load and what range can the compressor handle?\u003c\/h3\u003e\n\u003cp\u003eThis compressor is designed for high-load workshop use with a safe-rated capacity and a long telescopic stroke to reach deep or compact spring locations. It provides controlled compression of heavy suspension springs when used correctly with the supplied clamps and plates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum rated spring load: 1250 kg.\u003c\/li\u003e\n  \u003cli\u003eTelescopic travel: 120 mm–325 mm to fit varied strut lengths and mounting positions.\u003c\/li\u003e\n  \u003cli\u003eDrive interface: 19 mm hex for manual ratchet, breaker bar or appropriate socket drive (do not use impact tools).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how does the kit save time?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives neatly packed in a storage box and includes the components needed to compress and release springs without removing the axle assembly in many cases. By avoiding axle disassembly you reduce labor and the risk of additional work on suspension geometry components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 2 sets of three-pronged spring clamps, 1 telescopic compressor bar, 2 large pressure plates (90\/150 mm), 2 small pressure plates (70\/130 mm).\u003c\/li\u003e\n  \u003cli\u003eCompact toolbox dimensions: 45 x 31 x 9.5 cm for organized storage and transport.\u003c\/li\u003e\n  \u003cli\u003eDesigned to work on wishbone-mounted springs and many independent rear suspensions to speed up routine spring replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety steps and user tips should I follow?\u003c\/h3\u003e\n\u003cp\u003eWorking with compressed springs stores energy that can be hazardous if clamps slip or tools are misused. Observe strict safety procedures, inspect tools before each use, and follow the manufacturer’s torque and handling guidelines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways wear approved safety goggles (ordinary glasses are insufficient), gloves, and consider a face shield when compressing springs.\u003c\/li\u003e\n  \u003cli\u003eDo not use impact drivers; use a hand ratchet or breaker bar on the 19 mm hex drive for controlled motion.\u003c\/li\u003e\n  \u003cli\u003eCheck clamp teeth and plate seating before applying load; ensure correct plate size for the spring seat shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN spring compressor set suits professional garages, mobile mechanics, and experienced home DIYers who regularly service suspension components. It is ideal for anyone needing a robust, portable solution that covers a wide range of vehicle makes and spring sizes, and who will follow recommended safety practices when working with high-tension springs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use an impact wrench with this compressor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Do not use impact drivers. Use a manual ratchet or breaker bar on the 19 mm hex for controlled operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What spring diameters will the kit fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit fits springs roughly 80–135 mm in diameter, with jaw openings from 115–300 mm.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67586862809273,"sku":"B0773JXY92","price":169.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging-tools-set.jpg?v=1790494715"},{"product_id":"dayuan-bearing-separator-puller-set-12-piece-5-ton-capacity-2-3-splitters-black-oxide","title":"DAYUAN Bearing Separator \u0026 Puller Set — 12‑Piece 5 Ton Capacity, 2\" \u0026 3\" Splitters, Black Oxide","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN 12-piece bearing separator and puller kit is a heavy-duty 5-ton capacity set designed to split and remove 2\" and 3\" bearings, separate flywheels, and handle a wide range of press-fit pulling jobs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, workshop-ready collection combines two bearing splitters, matched push-puller legs, a cross bar, and a large forcing screw in a molded case so you can tackle stubborn bearings and tight-fit components without improvising. Every part is drop-forged and heat-treated with a black oxide finish to resist corrosion and deliver reliable clamping and extraction force. The kit’s components are modular so you can use them alone or pair them with other pullers and tools for more complex jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow strong is this kit for stuck bearings and flywheels?\u003c\/h3\u003e\n\u003cp\u003eThe DAYUAN set is rated to 5 tons (4.5 metric tons) of pulling force, giving ample capacity for automotive, ATV, motorcycle, and smallengine work. The heavy-duty forcing screw and cross bar transmit that force evenly across the separator jaws to reduce slippage and component damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5-ton (4.5 MT) maximum pulling capacity\u003c\/li\u003e\n  \u003cli\u003e6-1\/4\" (15.9 cm) forcing screw for deep, controlled extraction\u003c\/li\u003e\n  \u003cli\u003eDrop-forged, heat-treated parts for high tensile strength\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish to limit surface corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and parts are included, and how do they fit together?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains two bearing separators sized for common small bearing diameters, four push-puller legs in two lengths, a 5\" cross bar, and the forcing screw. The separators clamp behind the bearing or flywheel lip, the cross bar spans the shaft or hub, and the forcing screw pushes on the shaft center to extract the component cleanly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne 2\" (5 cm) and one 3\" (7.6 cm) bearing separator jaw\u003c\/li\u003e\n  \u003cli\u003eFour 4\" (10 cm) and four 5\" (12.7 cm) hex push-puller legs\u003c\/li\u003e\n  \u003cli\u003eOne 5\" (12.7 cm) puller cross bar and one 6-1\/4\" forcing screw\u003c\/li\u003e\n  \u003cli\u003eComponents are modular for multiple puller configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this set durable and suitable for regular shop use?\u003c\/h3\u003e\n\u003cp\u003eYes — the individual pieces are drop-forged and heat-treated to withstand repeated high-load extractions. The black oxide finish improves corrosion resistance and the blow-molded case protects tools during transport and storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated steel resists bending under load\u003c\/li\u003e\n  \u003cli\u003eBlack oxide coating reduces rust and wear\u003c\/li\u003e\n  \u003cli\u003eSturdy blow-molded case (15\" x 9.7\" x 2\") with latches for organized storage\u003c\/li\u003e\n  \u003cli\u003eFits in mechanics’ tool chests or vehicle toolboxes for mobile work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this kit make removal jobs easier and safer?\u003c\/h3\u003e\n\u003cp\u003eThe splitters and push-puller legs keep force applied where it’s needed so you avoid hammering or prying that can damage shafts, housings, or bearings. The long forcing screw gives straight, controlled pressure to minimize misalignment or sudden releases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSplit-jaw design clamps behind the part for even extraction\u003c\/li\u003e\n  \u003cli\u003eHex push legs allow secure engagement with crossbar and hardware\u003c\/li\u003e\n  \u003cli\u003eControlled forcing screw reduces risk of sudden component breakaway\u003c\/li\u003e\n  \u003cli\u003eReusable for many jobs—no one-time-use parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This DAYUAN 12-piece bearing separator and puller set is made for mechanics, hobbyists, ATV and motorcycle owners, and small-engine technicians who need a compact, versatile extraction kit. It suits garage and mobile mechanics who value durable, modular tools that fit in a single case and handle frequent bearing, gear, and flywheel separations without resorting to improvised methods.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the DAYUAN kit remove bearings larger than 3 inches?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes 2\" and 3\" separator jaws; larger bearings may require additional separators or auxiliary puller components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the set corrosion resistant for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Parts have a black oxide finish that improves corrosion resistance, but dry storage and occasional oiling are recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67586901704889,"sku":"B07T49N6NY","price":104.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging-bearing-separator-puller-set.jpg?v=1790496682"},{"product_id":"dayuan-bearing-separator-puller-set-14-piece-2-3-separators-forged-heat-treated-kit-with-forcing-screw","title":"DAYUAN Bearing Separator Puller Set 14-Piece — 2\" \u0026 3\" Separators, Forged Heat-Treated Kit with Forcing Screw","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN 14-piece bearing separator puller set is a professional-grade kit for safely splitting and extracting bearings, gears, and pulleys from shafts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete bearing separator and puller kit brings together robust separators, a cross-bar, forcing screw, and a molded blow-case so you can tackle removal jobs with control and safety. Components are forged and heat treated for durability, and the set’s modular design allows use of individual parts or combinations depending on the task. It’s built to handle stubborn press-fit parts while protecting component surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the separator puller remove bearings without damaging parts?\u003c\/h3\u003e\n\u003cp\u003eThe split-style separators slide behind the bearing or gear and clamp around its outer diameter, creating even pressure as the forcing screw pulls the component off the shaft. This approach avoids prying that can mar housings or shafts. Proper alignment and gradual tightening ensure the load is distributed evenly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo separator sizes (2\" and 3\") to match different shaft diameters\u003c\/li\u003e\n  \u003cli\u003eSplit plates clamp behind the race to prevent slipping\u003c\/li\u003e\n  \u003cli\u003eForcing screw and cross-bar convert axial force into controlled extraction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how can they be combined?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains separators in two sizes, a 5-inch cross-bar, a 6-1\/4-inch forcing screw, and accessory hardware, all stored in a blow-mold case. You can use each separator on its own with external pullers, or join the cross-bar and screw to perform standalone extractions. The modular pieces make the set flexible for varied workshop needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2\" and 3\" bearing separators for different component widths\u003c\/li\u003e\n  \u003cli\u003e5\" cross-bar mates with the 6-1\/4\" forcing screw for direct pulling\u003c\/li\u003e\n  \u003cli\u003eComponents compatible with standard bar pullers and legs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction features improve lifespan and performance?\u003c\/h3\u003e\n\u003cp\u003eCritical load-bearing parts are forged and heat-treated to resist bending and wear during repeated extractions. Threaded elements are made to withstand high torque, and the separators have precision-machined faces for consistent clamping. The blow-mold case protects tools from corrosion and organizes the kit for quick access.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-forged steel halves for enhanced strength\u003c\/li\u003e\n  \u003cli\u003eHeat treatment for improved toughness and fatigue resistance\u003c\/li\u003e\n  \u003cli\u003eProtective blow-mold case for storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use this kit safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eAlways match separator size to the bearing and seat the split halves squarely behind the race. Tighten the forcing screw a little at a time to keep pull force centered, and use lubricant on threads to reduce galling. Support shafts and housings to avoid bending or misalignment during extraction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelect correct separator diameter and orient evenly around the part\u003c\/li\u003e\n  \u003cli\u003eApply steady, incremental torque to the forcing screw\u003c\/li\u003e\n  \u003cli\u003eUse personal protective equipment and support the workpiece securely\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN 14-piece bearing separator puller set is aimed at professional mechanics, equipment maintenance technicians, and serious DIYers who work with press-fit bearings, gears, and pulleys. If you need a durable, modular extraction solution that organizes neatly in a case and offers compatibility with standard puller accessories, this kit is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the separators be used with other puller brands?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The separators fit standard bar pullers and legs and can be combined with many common puller systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What sizes of bearings can this kit handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The set includes 2\" and 3\" separators and works for a range of bearing diameters when paired with the cross-bar and forcing screw.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67586964816057,"sku":"B0BH3V2DND","price":117.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-of-case-with-tools.jpg?v=1790498203"},{"product_id":"dayuan-auto-body-repair-kit-7pc-fiberglass-handle-hammers-dollies-with-case-for-dent-removal","title":"DAYUAN Auto Body Repair Kit 7Pc — Fiberglass-Handle Hammers \u0026 Dollies with Case for Dent Removal","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN 7Pcs Auto Body Repair Kit is a compact, all-purpose set of fiberglass-shaft hammers and precision dollies designed to remove minor dents, shape panels, and finish bodywork with a comfortable, non-slip grip.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you work on car body panels at home or in a small shop and need a reliable, portable kit for light to medium metal shaping and dent removal, this DAYUAN 7-piece set gives you a practical combination of percussion hammers and trolleys (dollies) that cover common profiles. The kit bundles three heat-treated percussion hammers with four precision car-body trolleys, plus a storage case, so you can carry organized tools to the vehicle and get straight to work on knocks, creases, and finishing passes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit help with removing small dents?\u003c\/h3\u003e\n\u003cp\u003eThe percussion hammers are built with fiberglass shafts for shock resistance and a secure grip, letting you deliver controlled blows without excess vibration. Dollies provide solid backing shapes to support metal while you work, so you can restore contour and reduce hammer marks during the process.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree different percussion hammer heads for varied striking profiles\u003c\/li\u003e\n  \u003cli\u003eFour precision dollies matching common panel curves and flats\u003c\/li\u003e\n  \u003cli\u003eFiberglass handles that absorb impact and reduce hand fatigue\u003c\/li\u003e\n  \u003cli\u003eStorage case keeps matched hammer and dolly pairs together for efficient workflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich parts of the car can I use these tools on?\u003c\/h3\u003e\n\u003cp\u003eThis set is intended for exterior sheet metal and body panel work such as fenders, doors, hoods, and trunk lids. Use the hammers and dollies to knock out minor dents, refine panel edges, and smooth transition areas before filling or painting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for fender and door dent repair\u003c\/li\u003e\n  \u003cli\u003eUseful for shaping small panels and repairing creases\u003c\/li\u003e\n  \u003cli\u003eWorks on both flat and curved areas using matching dolly profiles\u003c\/li\u003e\n  \u003cli\u003eNot intended as a substitute for heavy equipment for major collision repair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the DAYUAN tools durable and comfortable to use?\u003c\/h3\u003e\n\u003cp\u003eAll hammers are heat-treated for strength, and the fiberglass shafts resist shock and bending while keeping weight low. Ergonomic, non-slip grips reduce accidental slips and protect your hands during repeated strikes, helping maintain accuracy and comfort on long jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated heads for long-lasting hardness and resilience\u003c\/li\u003e\n  \u003cli\u003eFiberglass shafts for impact absorption and lower vibration transfer\u003c\/li\u003e\n  \u003cli\u003eTextured, ergonomic handles for a secure hold in oily or sweaty hands\u003c\/li\u003e\n  \u003cli\u003eCompact case protects tools and extends service life by preventing damage in transit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how do I choose the right hammer-dolly pairing?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains three percussion hammers and four dollies in common shapes, giving flexible combinations to match panel contours. Start with a dolly that closely mirrors the panel curve and use lighter hammer taps to gradually reshape metal—switch hammers or dollies to refine the surface as needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3 percussion hammers with varied head profiles for different strike patterns\u003c\/li\u003e\n  \u003cli\u003e4 precision car body dollies covering convex, concave, and flat profiles\u003c\/li\u003e\n  \u003cli\u003eOne compact storage case for neat organization and transport\u003c\/li\u003e\n  \u003cli\u003eGuideline: always pair the dolly to the area’s curvature and use progressive tapping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN 7Pcs Auto Body Repair Kit is aimed at DIY enthusiasts, home mechanics, and small-body-shop technicians who need a portable, dependable set for light-to-medium panel beating, dent removal, and finishing tasks. It’s ideal for hobbyists restoring cars, owners doing cosmetic repairs, and professionals who want a secondary kit for on-site or mobile work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit remove large collision dents?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it’s designed for small-to-medium dents and shaping; major collision damage needs professional equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the handles comfortable for long use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, fiberglass shafts with ergonomic non-slip grips reduce vibration and improve comfort during extended work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67586967470265,"sku":"B0BMDNHZPV","price":103.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-kit-front-packaging.jpg?v=1790498284"},{"product_id":"dayuan-ball-joint-press-u-joint-removal-tool-kit-blue-case-1-c-frame-with-3-receiver-tubes","title":"DAYUAN Ball Joint Press \u0026 U-Joint Removal Tool Kit — Blue Case, 1\" C-frame with 3 Receiver Tubes","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN Ball Joint Press \u0026amp; U Joint Removal Tool Kit is a 4-in-1 repair set that removes and installs press-fit parts like 4WD ball joints, U-joints, and brake anchor pins with a heavy-duty C-frame and three receiver tubes stored in a durable blue carrying case.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you work on trucks, SUVs, or other vehicles with press-fit components, this DAYUAN kit gives you a portable, organized set designed for frequent shop use or backyard projects. The kit centers on a 1\" C-frame press and a matching screw that drive adapters and receiving tubes to push out or press in stubborn parts. Included adapters fit common sizes, and the molded case keeps everything protected and easy to transport.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit remove stuck ball joints and U-joints?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses mechanical leverage from the C-frame press and screw to apply steady force to press-fit components free without hammering the part or adjacent suspension arms. By matching an adapter to the part and seating the receiving tube behind it, the press forces the joint out in a controlled straight line.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\" C-frame press with hardened screw for steady force\u003c\/li\u003e\n  \u003cli\u003eThree receiver tubes sized to carry separated components\u003c\/li\u003e\n  \u003cli\u003eInstallation\/removal adapters to match common ball joint and U-joint dimensions\u003c\/li\u003e\n  \u003cli\u003eMolded case organizes parts and protects threads from damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and components are included in the set?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the C-frame press and a selection of receivers and adapters sized to cover typical truck and SUV press-fit jobs. Receivers are nested to accept the displaced part, while adapters support proper alignment during installation and removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eC-frame press and screw assembly rated for heavy duty use\u003c\/li\u003e\n  \u003cli\u003eReceiver tube 2-3\/4\" x 3\" for larger hubs and joints\u003c\/li\u003e\n  \u003cli\u003eReceiver tube 2-1\/4\" x 2-1\/2\" for medium applications\u003c\/li\u003e\n  \u003cli\u003eReceiver tube 1-3\/4\" x 2\" for smaller joints plus assorted adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit handle rusted or corroded parts?\u003c\/h3\u003e\n\u003cp\u003eYes — the press design delivers a concentrated, consistent force that often frees corroded components that resist impact-based removal. While severe corrosion may require penetrating lubricant or heat first, the kit is built to handle the additional load when parts begin to break free.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength screw for sustained torque under load\u003c\/li\u003e\n  \u003cli\u003eReceivers designed to support parts without crushing adjacent metal\u003c\/li\u003e\n  \u003cli\u003eWorks with penetrating oil and heat when parts are heavily corroded\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the kit stored and carried between jobs?\u003c\/h3\u003e\n\u003cp\u003eThe set arrives in a custom blow-molded blue carrying case that keeps each piece secure, simplifies transport, and protects the press screw threads and adapters from dirt and damage. The case also helps you inventory tools quickly before leaving the shop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-impact blow molded case with molded compartments\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits most tool chests or vehicle trunks\u003c\/li\u003e\n  \u003cli\u003eSecure latches and molded handle for jobsite portability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This DAYUAN Ball Joint Press \u0026amp; U Joint Removal Tool Kit is aimed at automotive technicians, mobile mechanics, and DIY enthusiasts who service 4WD vehicles and need a reliable, portable solution for removing and installing press-fit components. It suits regular workshop use and roadside repairs where a compact, organized kit reduces downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit press in new ball joints as well as remove old ones?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the included adapters and receivers let you both remove worn joints and press new ones in place for common 4WD applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the C-frame fit tight access areas on trucks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 1\" C-frame is compact for many tight spots, but very confined locations may still need partial disassembly for clearance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67587069804729,"sku":"B09P86G3CN","price":135.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-blue-case-front-view.jpg?v=1790498911"},{"product_id":"dayuan-10-piece-oxygen-sensor-oil-pressure-sender-socket-set-black-oxide-3-8-1-2-drive-cutout-sockets","title":"DAYUAN 10-Piece Oxygen Sensor \u0026 Oil Pressure Sender Socket Set — Black Oxide, 3\/8\" \u0026 1\/2\" Drive, Cutout Sockets","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN's 10-piece oxygen sensor and oil pressure sender socket set is a professional-grade specialty socket kit made from heat-treated chrome vanadium steel for safely removing and installing O2 sensors, oil pressure sending units, fuel injectors and vacuum switches.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're a DIY mechanic or a professional technician, this DAYUAN kit gathers the most commonly needed specialty socket sizes in one blow-molded case. The set includes both 3\/8\" and 1\/2\" drive options, multiple metric and imperial sizes, and sockets with side cutouts to protect sensor wiring during removal. Each piece is black oxide finished to resist corrosion, and the durable case keeps everything organized on the shelf or in the shop.\u003c\/p\u003e\n\n\u003ch3\u003eWhich parts can I remove with this socket set?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed for oxygen sensors, oil pressure sending units, some fuel injectors, and vacuum switches on most domestic and many international vehicles. The cutout sockets prevent cable damage when extracting sensors, while the variety of socket lengths reach recessed fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eO2 sensor sockets with cutout sides to avoid wire pinching\u003c\/li\u003e\n  \u003cli\u003eOil pressure sending unit sizes for common domestic applications\u003c\/li\u003e\n  \u003cli\u003eLong and short socket lengths for tight or recessed installations\u003c\/li\u003e\n  \u003cli\u003eAdapters for both 3\/8\" and 1\/2\" drive tools (driver tools not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these sockets work with my ratchet or breaker bar?\u003c\/h3\u003e\n\u003cp\u003eThe sockets accept either 3\/8\" or 1\/2\" square drives and are intended for hand tools such as ratchets, breaker bars, and hand wrenches. They are not rated for impact-tool use, so avoid air or electric impact guns to prevent damage to the sockets and fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" and 1\/2\" drive compatibility for common shop tools\u003c\/li\u003e\n  \u003cli\u003eWorks with ratchets, breaker bars, and manual wrenches\u003c\/li\u003e\n  \u003cli\u003eNot suitable for impact tools—use manual or non-impact power tools only\u003c\/li\u003e\n  \u003cli\u003ePairs well with thread chasers when installing new sensors (thread chaser not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes protect these tools from wear?\u003c\/h3\u003e\n\u003cp\u003eThe sockets are heat-treated chrome vanadium steel, chosen for tensile strength and durability under repeated use. A black oxide finish adds corrosion resistance and a low-glare surface that helps in greasy or oily environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated chrome vanadium construction for longevity\u003c\/li\u003e\n  \u003cli\u003eBlack oxide coating reduces rust and surface wear\u003c\/li\u003e\n  \u003cli\u003ePrecision 6PT and 12PT profiles for secure fastener engagement\u003c\/li\u003e\n  \u003cli\u003eVaried socket lengths and sizes to reduce slippage and rounding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the set organized and stored?\u003c\/h3\u003e\n\u003cp\u003eThe kit comes in a blow-molded plastic case sized for bench or toolbox storage with locking latches and a comfortable handle for transport. Molded compartments keep each socket in place so you can grab the right size quickly and return tools to their designated slot.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact blow-molded case with locking latches and carry handle\u003c\/li\u003e\n  \u003cli\u003eMolded interior holds each of the 10 specialty sockets securely\u003c\/li\u003e\n  \u003cli\u003eCase dimensions 11.8 x 9.8 x 2.5 inches for easy shelf or drawer storage\u003c\/li\u003e\n  \u003cli\u003eQuick inventory check—each socket has a dedicated slot\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this set is for: the DAYUAN 10-piece specialty socket set is ideal for home mechanics, mobile technicians, and shop professionals who service exhaust, engine-sensor, and oil-pressure components. If you frequently remove oxygen sensors, oil pressure senders, or similar threaded components and want a compact, durable kit that protects wires and reaches recessed fittings, this set provides the essential sizes and storage to make those jobs faster and safer.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these sockets with an impact wrench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, these sockets are not rated for impact tools; use with ratchet, breaker bar, or hand wrench only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include thread chasers or new sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, thread chasers and replacement sensors are not included; the set focuses on removal and installation support.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67587187343545,"sku":"B07V36G9MY","price":102.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-open-case.jpg?v=1790501388"},{"product_id":"dayuan-fender-roller-heavy-duty-telescoping-dual-arm-180-swivel-for-cars-light-trucks","title":"DAYUAN Fender Roller Heavy-Duty Telescoping Dual-Arm 180° Swivel for Cars \u0026 Light Trucks","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN Heavy Duty Fender Rolling Reforming Extending Tool is a durable, adjustable roller device made to reshape wheel arches and increase tire clearance from inside the wheel well.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional-grade fender roller is built for collision repair, wheel-fender flare work, and creating additional clearance for larger tires. Its telescoping dual-arm design and 180-degree swivel roller let technicians access the fender lip from inside the wheel opening, delivering controlled pressure and consistent results. Comfortable handling and rugged construction make it suitable for repeated use in busy garages and home workshops alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DAYUAN tool reshape a fender without damaging paint?\u003c\/h3\u003e\n\u003cp\u003eThe roller applies pressure from the inside of the wheel opening, allowing you to reform the metal gradually and evenly. Because the force is distributed across the roller head and controlled by the telescoping arms, you minimize concentrated stress points that cause paint cracking. Work incrementally and inspect progress frequently to preserve finish integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRoller contacts fender from inside wheel well for even pressure\u003c\/li\u003e\n  \u003cli\u003eTelescoping arm lets you dial in reach and leverage\u003c\/li\u003e\n  \u003cli\u003eUse slow, repeated passes rather than a single heavy strike\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fender roller fit my car or light truck?\u003c\/h3\u003e\n\u003cp\u003eDAYUAN designed the arm to be highly adjustable so it works across a wide range of passenger cars and light trucks. The second telescoping arm extends reach, and the roller swivels up to 180 degrees to adapt to different wheelhouse contours. Check vehicle wheel opening dimensions to ensure the roller can enter and reach the fender lip comfortably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTelescoping primary and secondary arms for variable reach\u003c\/li\u003e\n  \u003cli\u003e180-degree swivel roller adapts to curved fender lips\u003c\/li\u003e\n  \u003cli\u003eSuitable for most cars and light trucks with standard wheel openings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical advantages does the heavy-duty construction offer?\u003c\/h3\u003e\n\u003cp\u003eSturdy materials and solid joints help the tool resist bending or slipping during reforming operations, providing repeatable shaping and longer service life. Heavy-duty parts maintain alignment under load so the roller keeps consistent contact with the fender surface. That stability reduces user fatigue and makes professional results easier to achieve.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust construction for reliable leverage and alignment\u003c\/li\u003e\n  \u003cli\u003eDurable roller and arm joints withstand repeated use\u003c\/li\u003e\n  \u003cli\u003eErgonomic grip reduces hand strain during longer jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you use it safely and effectively in a shop setting?\u003c\/h3\u003e\n\u003cp\u003ePosition the roller inside the wheel well behind the fender lip, adjust the telescoping arm for firm but controlled contact, then rotate or roll along the lip in short, incremental passes. Protect the paint with proper padding when necessary, and always check clearances and fitment periodically. Pair the tool with safe jack and wheel removal procedures for unobstructed access.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSet roller against inside fender edge and tighten adjustment\u003c\/li\u003e\n  \u003cli\u003eMake short passes, inspecting the paint and metal frequently\u003c\/li\u003e\n  \u003cli\u003eUse padding if paint is thin or previously repaired\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN Heavy Duty Fender Rolling Reforming Extending Tool is aimed at collision repair shops, custom and performance installers, and knowledgeable DIYers who need to increase wheel clearance or smooth fender lips without replacing panels. If you regularly work on wheel fitment, run larger tires, or perform body reshaping, this tool gives precise, repeatable control for aftermarket and repair tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the DAYUAN fender roller be used on painted fenders?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if used carefully—apply light, incremental pressure and consider padding to avoid paint cracking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it fit trucks and SUVs as well as cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits most cars and light trucks; check wheelwell clearance and arm extension before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67587275620537,"sku":"B0B9BHG328","price":133.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-view-tool.jpg?v=1790503764"},{"product_id":"dayuan-front-end-service-tool-kit-5-piece-ball-joint-tie-rod-pitman-arm-separators-blue-heat-treated-alloy","title":"DAYUAN Front End Service Tool Kit — 5-Piece Ball Joint, Tie Rod \u0026 Pitman Arm Separators, Blue Heat-Treated Alloy","description":"\u003cp\u003e\u003cstrong\u003eThe DAYUAN 5-piece front end service tool kit is a heat-treated alloy-steel set designed to separate ball joints, tie rods and pitman arms quickly without damaging suspension components.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit gathers five purpose-shaped tools and an ABS carrying case to tackle stuck joints on passenger vehicles and light trucks. Each tool is built for leverage and durability, so you can remove stubborn ball joints, tie rods and pitman arms more efficiently than with improvised tools. The set's blue finish and varied shapes let you reach tight spaces and apply force where needed while keeping components intact.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit help remove stubborn ball joints and tie rods?\u003c\/h3\u003e\n\u003cp\u003eThe DAYUAN separators use mechanical leverage and tapered tips to pry joints apart without hammering or hammering adapters that risk component damage. Heat-treated alloy steel ensures the tools keep their shape under load and last through repeated shop use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTapered separator ends concentrate force to split press-fit joints cleanly.\u003c\/li\u003e\n  \u003cli\u003eC-shaped pullers provide controlled pressure around tie rod ends and pitman arms.\u003c\/li\u003e\n  \u003cli\u003eRobust construction resists bending when separating stuck components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich parts are included and what sizes or shapes do they cover?\u003c\/h3\u003e\n\u003cp\u003eThe set includes five distinct pieces made to match common front-end layouts: a dedicated ball joint separator, two C-shaped pitman arm pullers (small and large), and two tie rod removers. These shapes cover most passenger car and light truck applications where room is limited or angles vary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x ball joint separator for press-fit joints and tapered studs.\u003c\/li\u003e\n  \u003cli\u003e2x pitman arm pullers (small and large) for different arm diameters.\u003c\/li\u003e\n  \u003cli\u003e2x tie rod removers sized for inner and outer rod ends.\u003c\/li\u003e\n  \u003cli\u003eCompact ABS case organizes tools and protects finishes during transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe are these tools for repeated garage use?\u003c\/h3\u003e\n\u003cp\u003eDAYUAN manufactures the set from heat-treated alloy steel to withstand high clamping and prying forces without deforming. Using the proper separator reduces the need for hammers or improvised pry bars, lowering the risk of damaging steering knuckles or joint boots.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated alloy steel offers higher tensile strength and fatigue resistance.\u003c\/li\u003e\n  \u003cli\u003eBlue finish reduces corrosion and makes the tools easy to spot in a toolbox.\u003c\/li\u003e\n  \u003cli\u003eABS carrying case keeps parts organized and prevents surface wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This DAYUAN kit is suited for DIY mechanics, mobile technicians and professional shops that frequently service suspension and steering components on cars and light trucks. If you work on tie rods, ball joints or pitman arms and need a compact, durable set to separate stuck parts cleanly, this kit provides the shapes and strength required for efficient front-end work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit most passenger vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the five different shapes\/sizes cover common ball joints, tie rods and pitman arms on many cars and light trucks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the tools rust-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They have a blue protective finish to reduce corrosion, and the alloy-steel construction improves longevity.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67587294462137,"sku":"B09YPQ551F","price":115.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-end-service-kit-front-packaging.jpg?v=1790504753"},{"product_id":"dayuan-4-gauge-vacuum-carburetor-synchronizer-kit-for-motorcycles-metal-base-individual-damping-adapters","title":"DAYUAN 4-Gauge Vacuum Carburetor Synchronizer Kit for Motorcycles — Metal Base, Individual Damping \u0026 Adapters","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN 4-gauge vacuum carburetor synchronizer kit for multi-cylinder motorcycles and small engines, designed to quickly balance intake vacuum and simplify carburetor synchronization.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep multi-carb engines running smoothly with a professional-style vacuum sync set. This DAYUAN kit groups four precision gauges on a heavy metal base, each with individual damping and calibration controls, plus a selection of adapters and hoses to fit most motorcycle and small marine carburetors. The set helps identify mismatched cylinders, intake leaks, or timing discrepancies so you can restore balanced airflow without guesswork.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit help me sync multiple carburetors?\u003c\/h3\u003e\n\u003cp\u003eEach gauge measures intake vacuum from its matched carburetor, allowing you to compare readings side-by-side and adjust throttle or balancing screws until readings align. Individual damping controls let you stabilize fluctuating needles for accurate adjustments even on running engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour calibrated vacuum gauges mounted on a sturdy metal base for bench or shop use\u003c\/li\u003e\n  \u003cli\u003eIndividual damping valves to reduce needle vibration for clearer readings\u003c\/li\u003e\n  \u003cli\u003eFront-mounted calibration screws let you zero each gauge before use\u003c\/li\u003e\n  \u003cli\u003eVisual, simultaneous comparison removes guesswork from synchronization\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat adapters and fittings are included for compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes both 5 mm and 6 mm adapters plus long and short carburetor fittings so you can reach a range of intake ports and throttle bodies. With supplied hoses and plastic control valves, the set fits most motorcycles and can be adapted for small marine engines with the right connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5 mm and 6 mm threaded adapters included for common carb inlet sizes\u003c\/li\u003e\n  \u003cli\u003eLong and short adapters to access deep or awkward fittings\u003c\/li\u003e\n  \u003cli\u003eFlexible hoses with control valves to adjust airflow to each gauge\u003c\/li\u003e\n  \u003cli\u003eAdapters can be swapped for custom applications or marine use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I get accurate, repeatable readings?\u003c\/h3\u003e\n\u003cp\u003eAlways zero the gauges before each use by turning the calibration screw on the face until the needle points to 0. Install the white plastic valves if you experience excessive needle fluctuation; these valves let you fine-tune how much vacuum reaches the gauge, improving stability and repeatability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCalibrate each gauge to zero using the face-mounted screw before starting\u003c\/li\u003e\n  \u003cli\u003eUse damping controls and white plastic valves to steady needle movement\u003c\/li\u003e\n  \u003cli\u003eRun the engine at a consistent idle speed for comparable readings\u003c\/li\u003e\n  \u003cli\u003eAdjust carbs or synchronization screws until all gauges read evenly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: DIY mechanics, motorcycle technicians, and small-boat owners who need a straightforward, workshop-grade tool for diagnosing and synchronizing multi-carburetor engines. The DAYUAN synchronizer is especially useful for owners of twin-, triple-, and four-cylinder bikes who want precise vacuum comparisons without renting expensive shop equipment. If you perform routine tune-ups or troubleshoot uneven idles, misfires, or suspected intake leaks, this kit gives clear, actionable readings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my motorcycle carburetors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes 5mm and 6mm adapters plus long and short fittings to suit most motorcycle carbs; additional adapters can be used for unusual fittings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I stop the gauge needles from fluctuating?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Install the included white plastic valves and use the gauge damping controls; calibrate each gauge to zero before taking readings for best stability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67587388473529,"sku":"B091BQJBTQ","price":104.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-view-gauges-kit.jpg?v=1790507275"},{"product_id":"dayuan-3l-hand-brake-fluid-bleeder-kit-portable-1-person-brake-bleeder-with-e20-adapter-and-quick-release-fittings","title":"DAYUAN 3L Hand Brake Fluid Bleeder Kit — Portable 1‑Person Brake Bleeder with E20 Adapter and Quick‑Release Fittings","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN 3L Hand Brake Fluid Bleeder is a one-person, portable kit that lets you flush and refill brake fluid cleanly and efficiently for most European vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, durable hand pump and reservoir set was engineered for DIY mechanics and small shops that need a reliable way to bleed brakes without a second helper. Built from tough plastic, the kit holds up to three liters of fluid with a 1L suction tank for controlled extraction, and it includes a standard E20 adapter to fit many European calipers and master cylinders. Quick-release fittings and Euro ports simplify connections while included instructions guide safe use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DAYUAN kit make single-person brake bleeding easier?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit combines a hand pump, a sealed 3L collection container and clear hoses to let one person pull fluid through the system while keeping the master cylinder topped up. The quick-release chuck and Euro ports create fast, leak-minimizing connections so you can work faster and cleaner.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-operated pump enables one-person operation without air compressors.\u003c\/li\u003e\n  \u003cli\u003eQuick-release locking chuck reduces accidental disconnection.\u003c\/li\u003e\n  \u003cli\u003eTransparent suction tank helps monitor removed fluid and air bubbles.\u003c\/li\u003e\n  \u003cli\u003eEuro ports and standard E20 adapter fit common European fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and fittings does the 3L bleeder support?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit is sized and configured with European vehicles in mind; the included E20 (45 mm) adapter suits many domestic European calipers and master cylinders. It also works on other makes when compatible fittings or simple hose adaptors are used.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard E20 adapter (45 mm, 1.8\") for many European models.\u003c\/li\u003e\n  \u003cli\u003eEuro ports for common bleed nipple fittings.\u003c\/li\u003e\n  \u003cli\u003eUniversal hoses allow adaption to nonstandard systems with simple adapters.\u003c\/li\u003e\n  \u003cli\u003eSuitable for cars, light trucks and motorcycles where adapter fits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use and maintain the DAYUAN brake bleeder safely?\u003c\/h3\u003e\n\n\u003cp\u003eFollow the included safety instructions: wear gloves and eye protection, avoid mixing fluids, and dispose of used brake fluid responsibly. Clean the kit after each use; the robust plastic surfaces are easy to rinse and wipe dry to keep seals and fittings functioning properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWear protective gloves and eyewear when handling brake fluid.\u003c\/li\u003e\n  \u003cli\u003eRinse hoses and tank with clean fluid or solvent recommended in the manual.\u003c\/li\u003e\n  \u003cli\u003eStore the kit upright in a cool, dry place away from direct sunlight.\u003c\/li\u003e\n  \u003cli\u003eReplace worn seals or tubing to maintain vacuum performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The DAYUAN 3L Hand Brake Fluid Bleeder is ideal for home mechanics, mobile technicians, and small garages that service European and other compatible vehicles. If you prefer a reusable, hand-operated tool that reduces reliance on helpers or shop compressors, and you value simple connections and easy cleanup, this kit offers a practical, budget-friendly solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit work on non-European cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—while optimized for European models via the E20 adapter, you can use adapters or compatible hoses for many other vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much fluid can the collector hold?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The system supports up to 3 liters total capacity with a 1L suction tank for controlled extraction.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67587446407353,"sku":"B081HD3CNB","price":98.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-view-brake-bleeder.jpg?v=1790508410"},{"product_id":"dayuan-oil-pan-thread-repair-kit-114pc-drain-plug-repair-set-with-hardened-taps-blow-moulded-case","title":"DAYUAN Oil Pan Thread Repair Kit 114pc, Drain Plug Repair Set with Hardened Taps \u0026 Blow‑Moulded Case","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN 114-piece Oil Pan Thread Repair Kit is a complete workshop-grade set to re-tap damaged drain plug threads and fit new replacement drain screws and copper washers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen drain plug threads in oil sumps, gearboxes or differentials become stripped, leaking or impossible to tighten, this kit gives a practical repair path without replacing housings. The DAYUAN set includes hardened taps, a full range of replacement drain plugs and matching copper sealing washers, all stored in a blow-moulded case for portable, workshop or mobile-repair use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this set restore a stripped drain plug thread?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses a slightly larger tap to cut a clean, new thread profile through the damaged hole, allowing a matching replacement plug to seat and seal. Taps are hardened steel to cut reliably through common sump or gearbox metals, while copper washers provide a fresh crush seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes six taps from M13 to M22 to oversize and re-thread existing holes.\u003c\/li\u003e\n  \u003cli\u003eStep process: remove old plug, select correct tap, re-thread, fit new plug and copper washer.\u003c\/li\u003e\n  \u003cli\u003eHardened steel taps designed for repeated use in workshop settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and thread sizes does it cover?\u003c\/h3\u003e\n\u003cp\u003eThe assortment is chosen to suit a wide range of passenger cars and light commercial vehicles from many popular manufacturers. Stocked thread sizes and plugs match common drain plug standards used by European and Asian brands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible brands listed include Audi, VW, BMW, Citroen, Fiat, Ford, Seat, Honda and more.\u003c\/li\u003e\n  \u003cli\u003eThread sizes provided: M13×1.25, M13×1.5, M15×1.5, M17×1.5, M20×1.5 and M22×1.5.\u003c\/li\u003e\n  \u003cli\u003e36 replacement drain plugs and 72 copper washers cover repeated repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and parts are included, and how are they organized?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies taps, replacement drain plugs in multiple sizes and copper washers in a graduated count to match plug sizes. A rigid blow-moulded plastic case keeps components separated and easy to locate for jobsite or shop use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6 high-strength taps, 36 threaded oil drain plugs and 72 copper washers (114 pieces total).\u003c\/li\u003e\n  \u003cli\u003eWashers counted by size: more M13 washers for frequent use and balanced counts for other sizes.\u003c\/li\u003e\n  \u003cli\u003eCompact case with molded slots to avoid lost parts and speed up job turnaround.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use the kit safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eWork on a cool, drained gearbox or sump and use a suitable tap wrench to maintain perpendicular alignment while cutting the new thread. Always match the new plug and washer to the tap size used, and torque to the vehicle maker's recommendation to avoid over-tightening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrain fluid fully and clean the hole before tapping to avoid contamination.\u003c\/li\u003e\n  \u003cli\u003eChoose the next larger tap if original thread is worn (e.g., M14 original → use M15 tap).\u003c\/li\u003e\n  \u003cli\u003eFit a copper washer over the new plug and tighten to specified torque for a leak-free seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, independent mechanics and DIY vehicle owners who need a robust, reusable solution for repaired drain plug threads. The DAYUAN 114-piece set is aimed at garages and mobile mechanics who service a broad range of European and Asian cars and want an organized, durable kit to fix stripped sump, gearbox and differential drain threads without replacing housings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit repair any stripped oil drain thread?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It repairs many common stripped threads by oversizing to supplied taps; check that your original size matches the kit’s target range M13–M22.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the taps and plugs durable for repeated use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Taps are hardened and tempered steel and replacement plugs are made for repeated workshop repairs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67587465838777,"sku":"B07R7PRDKR","price":100.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-case-open.jpg?v=1790509000"},{"product_id":"dayuan-transmission-fluid-transfer-pump-3l-manual-filler-kit-85-psi-gauge-8-adapters-white","title":"DAYUAN Transmission Fluid Transfer Pump 3L Manual Filler Kit — 85 PSI Gauge, 8 Adapters (White)","description":"\u003cp\u003e\u003cstrong\u003eThe DAYUAN 3L Manual Transmission Fluid Transfer Pump is a portable filler and extractor kit designed to speed and simplify topping up or replacing manual transmission fluid with controlled pressure up to 85 PSI.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact 3‑liter system combines a sealed reservoir, a soft‑grip manual pump handle, a pressure gauge, and eight adapters so you can transfer transmission fluid cleanly and accurately. It works with a wide range of European and Asian makes and is built for repeated garage use — whether you’re performing routine maintenance or doing a transmission service that requires precise fluid delivery. The unit is supplied new, in white, and supports pneumatic operation when paired with an air source.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I operate the DAYUAN transmission fluid filler?\u003c\/h3\u003e\n\n\u003cp\u003eOperating the unit is straightforward and designed for one‑person use. Fill the reservoir through the cap using a funnel, secure the cap, attach the dispensing hose and the correct adapter, then pump to move fluid into the gearbox while watching the pressure gauge.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eOpen filling cap and pour fluid into the 3L container using a funnel.\u003c\/li\u003e\n\u003cli\u003eTighten the cap and connect the dispensing hose to the chosen adapter.\u003c\/li\u003e\n\u003cli\u003eInsert adapter into the transmission opening after draining used fluid.\u003c\/li\u003e\n\u003cli\u003ePump with the soft‑grip handle or use pneumatic pressure; monitor flow with the built‑in gauge (0–85 PSI).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles are compatible with this filler system?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes multiple adapters to fit common transmission fill points on many popular brands. It’s intended for manual transmissions on a broad set of cars but always verify the correct adapter size and procedure for your vehicle model before use.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eAdapters included for Ford, BMW, Honda, Nissan, Volkswagen, Porsche, Mini Cooper, Audi and Mercedes fill openings.\u003c\/li\u003e\n\u003cli\u003eSuitable for most manual transmission housings and drain\/fill ports when the proper adapter is used.\u003c\/li\u003e\n\u003cli\u003eCheck your service manual for recommended fluid type and fill location.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features help control and speed up the fluid transfer?\u003c\/h3\u003e\n\n\u003cp\u003eThe DAYUAN system balances manual pumping with optional pneumatic assistance for faster extraction and dispensing. A pressure gauge lets you monitor flow pressure to avoid over‑pressurizing the gearbox or causing spills.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eBuilt‑in pressure gauge (0–85 PSI \/ 0–6 bar) for flow control and safe operation.\u003c\/li\u003e\n\u003cli\u003eSoft‑grip pump handle for comfortable manual operation and steady pumping action.\u003c\/li\u003e\n\u003cli\u003ePneumatic ready — connect to an air source for quicker fluid movement when needed.\u003c\/li\u003e\n\u003cli\u003e3L reservoir size provides a compact balance of capacity and portability for most service jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain and store the pump between uses?\u003c\/h3\u003e\n\n\u003cp\u003eKeep the system clean and dry to extend service life, and store with adapters and hoses detached to avoid kinks or trapped fluid. After use, release pressure, empty or seal the reservoir, and wipe the exterior before storage.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eRelease internal pressure with the pressure release cap before disassembly.\u003c\/li\u003e\n\u003cli\u003eFlush hoses with compatible solvent if cross‑contaminated by different fluids.\u003c\/li\u003e\n\u003cli\u003eStore in a clean, dry place away from direct sunlight to preserve seals and fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Professional mechanics, independent garage owners, and DIY enthusiasts who service manual transmissions and need a reliable, portable filling system with pressure monitoring. The DAYUAN 3L kit is especially useful for anyone who wants to reduce mess, speed up the fluid exchange, and maintain better control over fill pressure while working on a range of European and Asian vehicles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this pump with my air compressor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit supports pneumatic operation when connected to a compatible air source to speed fluid transfer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It includes eight common adapters for many Ford, BMW, Honda, Nissan, VW, Porsche, Mini, Audi and Mercedes models; verify adapter fit before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67587467051193,"sku":"B0BPSHMKK8","price":105.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-view-transmission-pump.jpg?v=1790509060"},{"product_id":"dayuan-diesel-engine-compression-tester-kit-17pc-0-70-bar-0-1000-psi-gauge-glow-plug-injector-adapters","title":"DAYUAN Diesel Engine Compression Tester Kit 17pc — 0–70 bar (0–1000 psi) Gauge \u0026 Glow Plug\/Injector Adapters","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN's 17-piece diesel engine compression tester kit is a complete diagnostic set with a 0–70 bar (0–1000 psi) gauge and nine glow-plug plus four injector adapters to measure compression on most diesel engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit gives mechanics and DIYers a reliable way to check cylinder compression without disassembling the engine. The heavy-duty gauge includes a release valve and a 35.5 cm (14\") reinforced hose for safe, repeatable readings, while the assortment of adapters covers a wide range of glow plug and injector thread sizes used in cars, trucks and tractors. Everything nests in a molded case so parts stay organized and ready for on-the-road diagnostics.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use this compression tester on a diesel engine?\u003c\/h3\u003e\n\n\u003cp\u003eUsing the DAYUAN kit is straightforward: warm the engine to operating temperature, disable fuel and ignition systems, remove the glow plug or injector, fit the correct adapter, and crank the engine to record peak pressure. The built-in release valve lets you safely bleed the hose after each test so you can move to the next cylinder quickly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWarm engine to normal temperature for consistent readings\u003c\/li\u003e\n  \u003cli\u003eSelect matching adapter for glow plug or injector port\u003c\/li\u003e\n  \u003cli\u003eAttach 35.5 cm hose and crank with starter for peak gauge value\u003c\/li\u003e\n  \u003cli\u003eOpen release valve to lower pressure before removing hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat measurements and accuracy can I expect from the gauge?\u003c\/h3\u003e\n\n\u003cp\u003eThe analog dial reads from 0 to 70 bar (0–1000 psi), making it suitable for light and heavy-duty diesel cylinders. The clear face and calibrated increments let you compare cylinders side-by-side to spot weak compression. While not a laboratory instrument, the gauge delivers practical, workshop-grade precision for mechanical diagnosis.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRange: 0–70 bar \/ 0–1000 psi for diverse diesel applications\u003c\/li\u003e\n  \u003cli\u003eVisible analog dial with calibrated markings for quick comparison\u003c\/li\u003e\n  \u003cli\u003eReinforced 35.5 cm hose for safe reach into engine bays\u003c\/li\u003e\n  \u003cli\u003eRelease valve for controlled depressurization after tests\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich engines and ports do the adapters fit?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes nine glow-plug adapters and four injector adapters covering common metric thread sizes found in many diesel vehicles and agricultural machines. That variety means you can test compression on most European and Asian diesel cars, light trucks, and compact tractors without buying extra fittings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGlow plug adapters: nine sizes, from M10 and M12 to larger M22 fittings\u003c\/li\u003e\n  \u003cli\u003eInjector adapters: four metric sizes including M20, M22, and M24 variants\u003c\/li\u003e\n  \u003cli\u003eAdapters include varying lengths to match recessed ports and deep threads\u003c\/li\u003e\n  \u003cli\u003eBuilt-in resetter on select adapters for fast configuration changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat problems can this tool help diagnose in diesel engines?\u003c\/h3\u003e\n\n\u003cp\u003eCompression testing helps identify worn piston rings, leaking valves, head gasket breaches, and other sealing issues that reduce cylinder pressure. By comparing readings across cylinders, you can isolate problem areas and decide whether further inspection or engine teardown is warranted.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDetects uneven compression indicating ring or valve wear\u003c\/li\u003e\n  \u003cli\u003eHighlights cylinders with possible head gasket leaks\u003c\/li\u003e\n  \u003cli\u003eUseful for post-repair verification and routine engine health checks\u003c\/li\u003e\n  \u003cli\u003eSimplifies decisions about engine overhaul versus targeted repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN 17-piece compression tester is designed for professional mechanics, fleet technicians, and serious DIYers who service diesel cars, pickups and small tractors. If you need a portable, organized kit that covers a wide range of glow plug and injector ports and provides workshop-grade pressure readings, this set offers good value and practical diagnostic capability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this tester on both glow plug and injector ports?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes nine glow-plug adapters and four injector adapters to fit common diesel ports.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure range does the gauge measure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The gauge reads 0–70 bar (0–1000 psi), suitable for most diesel cylinder compression checks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67587488088249,"sku":"B07FLTBH6C","price":110.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-case-and-gauge.jpg?v=1790510019"},{"product_id":"dayuan-oil-filter-cap-wrench-socket-set-23-piece-aluminum-1-2-drive-non-crushing","title":"DAYUAN Oil Filter Cap Wrench Socket Set — 23-Piece Aluminum, 1\/2\" Drive, Non-Crushing","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN 23-piece aluminum alloy cup-type oil filter cap wrench socket set is a lightweight, rust-resistant toolkit that fits a wide range of oil filter caps and works with 1\/2\" drive tools for safe, non-crushing removal and installation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis complete kit was built for mechanics, DIYers and fleet owners who need a compact, durable solution for removing and installing cup-style oil filter caps across many makes and models. The set groups 23 precision-machined aluminum sockets in a dedicated storage case and includes a universal adapter to accept 1\/2\" square drive ratchets and handles. Because the sockets use a cup-style grip rather than thin jaws, they distribute force evenly around the filter cap to reduce the chance of deformation while speeding service time.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and filter styles does this set fit?\u003c\/h3\u003e\n\u003cp\u003eThe DAYUAN set covers a range of common cup-type and cap-style oil filters found on light vehicles, SUVs and light trucks. Sizes are selected to match many OEM filter caps so you can handle multiple models without buying separate tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e23 socket sizes to match various manufacturer cap diameters\u003c\/li\u003e\n  \u003cli\u003eCup-style design for sealed cap and crush-prone filters\u003c\/li\u003e\n  \u003cli\u003eUseful for domestic and many import passenger vehicles\u003c\/li\u003e\n  \u003cli\u003eCompact case keeps the right size on hand for each job\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the universal adapter and drive compatibility help my workflow?\u003c\/h3\u003e\n\u003cp\u003eThe included adapter accepts a 1\/2\" square drive, enabling the sockets to be used with standard ratchets, breaker bars and torque wrenches. This lets you apply steady, controlled torque during removal or installation without improvising adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2\" adapter for compatibility with common workshop tools\u003c\/li\u003e\n  \u003cli\u003eWorks with ratchets, torque wrenches and breaker bars for controlled force\u003c\/li\u003e\n  \u003cli\u003eSpeeds up oil service by avoiding multiple specialty tools\u003c\/li\u003e\n  \u003cli\u003eAdapter stores in the case to prevent loss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the aluminum construction and socket design practical?\u003c\/h3\u003e\n\u003cp\u003eThese sockets are made from aluminum alloy to balance low weight with corrosion resistance. The socket-style grip hugs the filter cap evenly, reducing the risk of crushing stamped steel or plastic caps during removal and preserving reusable components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight aluminum resists rust and limits tool weight in a busy toolbox\u003c\/li\u003e\n  \u003cli\u003eSocket grip disperses torque around the cap, avoiding deformation\u003c\/li\u003e\n  \u003cli\u003eEasy-to-handle pieces that reduce fatigue when servicing multiple vehicles\u003c\/li\u003e\n  \u003cli\u003eDurable finish for longevity in workshop environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories are included and how is the set organized?\u003c\/h3\u003e\n\u003cp\u003eThe full kit contains 23 machined cup sockets, a universal adapter, a ratchet wrench and a ring spanner — all housed in a molded storage case to keep parts visible and secure. Organization reduces downtime and helps you find the correct size quickly during preventive maintenance or roadside jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete 23-piece socket assortment for broad coverage\u003c\/li\u003e\n  \u003cli\u003eRatchet wrench and ring spanner for immediate use\u003c\/li\u003e\n  \u003cli\u003eMolded carrying case for neat storage and transport\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits standard tool cabinets or vehicle trunks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The DAYUAN 23-piece cup-type oil filter socket set suits professional technicians, independent mechanics, quick-lube shops and home mechanics who service a variety of passenger vehicles and light trucks. If you want a single, organized toolkit that reduces filter-cap damage, speeds oil changes and works with standard 1\/2\" drive tools, this set provides the coverage and portability to make routine maintenance more efficient.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sockets work with my 1\/2\" ratchet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set includes a universal adapter for 1\/2\" square drives, making it compatible with standard ratchets and torque tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the sockets likely to rust with workshop use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are made from aluminum alloy, which resists rust and keeps the tools lightweight for frequent use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67587582951609,"sku":"B07FLTDXDX","price":110.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging_5d6100b5-f2b0-41b8-b995-369cfe8698a5.jpg?v=1790513873"},{"product_id":"dayuan-exhaust-pipe-expander-set-3-piece-1-1-8-3-1-2-hot-forged-steel-carry-case","title":"DAYUAN Exhaust Pipe Expander Set 3-Piece 1-1\/8\"–3-1\/2\" | Hot-Forged Steel, Carry Case","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN's upgraded 3-piece exhaust pipe expander set reshapes and enlarges socketed exhaust tubes from 1-1\/8\" up to 3-1\/2\" so joints fit snugly and clamp leaks are reduced.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional-grade kit includes three hot-forged steel expanders sized to cover the most common muffler and tailpipe diameters, three O-rings, and a compact carry box. The expanders are engineered to widen or restore the internal diameter of socketed pipes evenly—not to create a taper—so replacement pieces and clamps seat correctly. The set is built for mechanical shops and DIYers who need a reliable, portable tool for exhaust repair and installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these expanders reshape an exhaust pipe without tapering it?\u003c\/h3\u003e\n\u003cp\u003eEach expander uses a multi-segment mandrel that grows uniformly as you turn the hex drive, producing an even increase in diameter along the inserted length. This preserves the pipe profile so mating parts slide together evenly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInsert at least three-quarters of the expander into the pipe for full-contact expansion.\u003c\/li\u003e\n  \u003cli\u003eTurn the hex drive clockwise to expand the segments evenly.\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain constant diameter rather than form a cone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes are included and which pipes will they fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit covers small, medium and large exhaust tubes common on cars, trucks and aftermarket systems. Each size is labeled and selected to reduce leaks and restore proper clamp seating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmall: expands from 1-1\/8\" to 1-3\/4\".\u003c\/li\u003e\n  \u003cli\u003eMedium: expands from 1-1\/2\" to 2-1\/2\".\u003c\/li\u003e\n  \u003cli\u003eLarge: expands from 2-1\/8\" to 3-1\/2\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use the tool safely and get consistent results?\u003c\/h3\u003e\n\u003cp\u003eFollow simple handling steps to protect the tool and the pipe. The expanders are intended for reshaping socketed pipes and removing dents—not for stretching new straight tubing into shape.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use an impact wrench or apply excessive torque; turn the hex drive by hand or with a standard wrench.\u003c\/li\u003e\n  \u003cli\u003eEnsure the expander is inserted at least three-quarters into the pipe before expanding.\u003c\/li\u003e\n  \u003cli\u003eUse the supplied O-ring for each expander to help hold position during work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and extras come with the set?\u003c\/h3\u003e\n\u003cp\u003eThe kit is built for durability and portability, with components intended to withstand workshop use. A molded carry case keeps the pieces organized and protected between jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHot-forged steel construction for each expander, engineered for strength and longevity.\u003c\/li\u003e\n  \u003cli\u003eThree dedicated O-rings—one per tool—to assist in positioning and sealing.\u003c\/li\u003e\n  \u003cli\u003eCompact storage box for transport and secure storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN 3-piece exhaust pipe expander set is suited to mechanics, exhaust specialists, fleet maintenance crews and committed DIYers who frequently repair mufflers, tailpipes and exhaust fittings. If you need a portable, dependable way to remove clamp leaks, restore socketed pipe diameters, and prepare tubes for clamps and replacement sections, this kit delivers a straightforward, workshop-ready solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these expanders be used on straight pipe to increase diameter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They are designed to reshape and widen socketed or dented pipes evenly, not to stretch straight pipe into a larger diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is an impact wrench safe to use with these expanders?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Do not use an impact wrench. Turn the hex drive by hand or with a manual wrench to avoid tool damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67589156077753,"sku":"B0FQTQ53DC","price":93.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-expander-set-front-view.jpg?v=1790529286"},{"product_id":"dayuan-cooling-system-vacuum-purge-radiator-coolant-refill-tool-kit-4-adapter-set-with-dual-scale-gauge","title":"DAYUAN Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit — 4-Adapter Set with Dual-Scale Gauge","description":"\u003cstrong\u003eDAYUAN Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit is a pneumatic vacuum filler that evacuates air from a vehicle cooling system and draws in premixed coolant quickly and cleanly.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact kit uses shop air to create a vacuum in the cooling system, eliminating the need for manual bleeding and reducing the chance of trapped air pockets. Built around an aluminum manifold, brass fittings and a dual-scale vacuum gauge, the tool connects to the radiator neck with one of four adapter sizes and pulls coolant into the system through a clear hose for visual monitoring. It shortens refill time, simplifies cleanup, and is designed to work across most passenger vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the vacuum purge process speed up coolant refills?\u003c\/h3\u003e\n\u003cp\u003eThe tool first seals the radiator opening with a chosen adapter, then uses shop air and the manifold’s fittings to pull a vacuum through the filler hose. Once the target vacuum is reached, opening the valve lets premixed coolant flow into the depressurized cooling system, filling without large air pockets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePneumatic vacuum pulls air out before adding coolant to prevent trapped pockets.\u003c\/li\u003e\n  \u003cli\u003e0–76 cmHg (0–30 inHg) gauge shows vacuum level for precise timing.\u003c\/li\u003e\n  \u003cli\u003eVacuum fill typically completes in 5–10 minutes depending on coolant volume.\u003c\/li\u003e\n  \u003cli\u003eClear coolant hose allows visible flow and leak detection while filling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicle openings and hookups does this kit support?\u003c\/h3\u003e\n\u003cp\u003eThe refill kit includes a fixed O.D. 32 mm rubber adapter and three interchangeable adapter sleeves sized 35 mm, 40 mm and 45 mm to fit most radiator necks and coolant reservoirs. It also supplies two accessory air plugs—European and American styles—and quick couplers to connect to a standard shop air source for vacuum generation and leak testing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdapters: 32 mm base plus sleeves for 35, 40, 45 mm openings.\u003c\/li\u003e\n  \u003cli\u003eAir compatibility: European and American-style air plugs included.\u003c\/li\u003e\n  \u003cli\u003eQuick couplers ease connection to shop compressors for vacuum operation.\u003c\/li\u003e\n  \u003cli\u003eBrass fittings and aluminum manifold resist corrosion for workshop durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I read and use the vacuum gauge safely during refill?\u003c\/h3\u003e\n\u003cp\u003eThe dual-scale gauge reads in cmHg and inHg and indicates the vacuum pulled inside the cooling system. Typical filling is recommended when the gauge registers around -25 to -20 inHg (approximately -63 to -51 cmHg), but users should consult vehicle service guidance for exact specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGauge range: 0 to -76 cmHg (0 to -30 inHg) for clear monitoring.\u003c\/li\u003e\n  \u003cli\u003eRecommended fill zone: usually near -25 to -20 inHg for many systems.\u003c\/li\u003e\n  \u003cli\u003eTransparent hoses let you confirm coolant movement as valve opens.\u003c\/li\u003e\n  \u003cli\u003eCase protects the gauge and components between uses to prevent damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories are included and how do they improve workflow?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships in a molded case and contains a 60\" coolant filling hose, a 23\" splash-proof bleeder hose, brass fittings, adapter sleeves, two air plugs, quick couplers, and the aluminum manifold with attached gauge. These components are selected to minimize tool changes and reduce cleanup time during routine service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e60\" clear coolant hose for unobstructed flow monitoring and reach.\u003c\/li\u003e\n  \u003cli\u003e23\" splash-proof bleeder hose for controlled venting without spills.\u003c\/li\u003e\n  \u003cli\u003eMolded storage case protects the gauge and organizes parts for quick use.\u003c\/li\u003e\n  \u003cli\u003eDurable materials (aluminum body, brass fittings) extend tool life in workshops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN Vacuum Purge Radiator Coolant Refill Kit is built for professional mechanics, home DIYers who perform routine cooling system service, and fleet technicians who want faster, cleaner coolant changes. It’s especially helpful where repeatable, air-free fills and leak testing are important to avoid overheating risks caused by trapped air and to save time on every service interval.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit fit my radiator opening?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It includes a 32 mm base plus 35, 40 and 45 mm adapter sleeves; check your radiator neck diameter before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a shop air compressor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit uses shop air through quick couplers to create the vacuum needed for filling and leak testing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67590451724473,"sku":"B09KLJHF98","price":84.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-view-tool-kit.jpg?v=1790534687"},{"product_id":"dayuan-motorcycle-chain-breaker-set-13-piece-chain-cutter-riveter-kit-red-case-hardened-steel-press","title":"DAYUAN Motorcycle Chain Breaker Set - 13-Piece Chain Cutter \u0026 Riveter Kit, Red Case, Hardened-Steel Press","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN Motorcycle Chain Breaker Set is a complete 13-piece chain cutter and riveter kit that removes and reinstalls #35–#630 motorcycle, bicycle, ATV and OHV cam chains with a hardened-steel press and a compact red carrying case.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one chain tool kit combines a robust chain press, multiple pins and anvils, a riveter, and a sturdy blow-molded case so you can split, size, and repair drive chains at home, in the garage, or trackside. The set is designed to push chain pins cleanly out and support correct reassembly without reaching for separate tools. Everything nests inside the 4.8\" x 3\" x 8.5\" case for transport and storage.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DAYUAN kit remove and reinstall chain links?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses a hardened-steel chain press that aligns with the chain pin and forces it out in a controlled motion, then supports rivet installation for rejoining links. A range of pin sizes and anvils lets you match the tool to the chain pitch for correct alignment and damage-free operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChain press head and handle for steady, even pressure\u003c\/li\u003e\n  \u003cli\u003eThree pin sizes (2.2mm, 2.9mm, 3.8mm) to fit common chain pitches\u003c\/li\u003e\n  \u003cli\u003eThree anvils and two press plates to support rivet shaping\u003c\/li\u003e\n  \u003cli\u003eSpring and riveter piece to assist clean reinstallation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat chains and vehicles are compatible with this set?\u003c\/h3\u003e\n\u003cp\u003eThe DAYUAN set works with a wide range of drive chains, from small bicycle chains up through many motorcycle, ATV and OHV cam chains. It covers chain standards listed from #35 to #630, so it handles most common home and light-professional repair jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for bicycle, motorcycle and ATV drive chains\u003c\/li\u003e\n  \u003cli\u003eCompatible with cam chains and common drive standards #35 through #630\u003c\/li\u003e\n  \u003cli\u003eMultiple pins and anvils accommodate different chain widths and link types\u003c\/li\u003e\n  \u003cli\u003eUseful for on-vehicle repairs where removing the sprocket is not desired\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and portable is the tool set for repeated use?\u003c\/h3\u003e\n\u003cp\u003eKey components are made from hardened steel for strength and longevity, so the kit is built to withstand repeated pressing and riveting tasks. The heavy-duty blow-molded red case keeps parts organized, protects the tools from damage, and makes it easy to carry to the shop or track.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened-steel construction on press, pins and riveter for resilience\u003c\/li\u003e\n  \u003cli\u003eBlow-molded plastic case sized 4.8\" x 3\" x 8.5\" for compact storage\u003c\/li\u003e\n  \u003cli\u003eAll parts nest securely to prevent loss and simplify transport\u003c\/li\u003e\n  \u003cli\u003eReplaceable pins and plates extend usable life of the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the DAYUAN 13-piece chain breaker kit?\u003c\/h3\u003e\n\u003cp\u003eThe set arrives ready to use with a selection of tools and hardware to cover most common chain repair scenarios. Each piece has a defined role, so you won’t need extras for routine chain removal or rivet-style reassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 chain press (main tool), 1 handle, and 1 lever for operation\u003c\/li\u003e\n  \u003cli\u003e3 anvils, 3 pin sizes (2.2mm, 2.9mm, 3.8mm) and 2 press plates\u003c\/li\u003e\n  \u003cli\u003e1 riveter and 1 spring for secure reinstallation of links\u003c\/li\u003e\n  \u003cli\u003eCompact carrying case for neat storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN Chain Breaker Set is aimed at DIY mechanics, home garage enthusiasts, small workshops and riders who prefer to perform chain maintenance themselves. It’s ideal if you need a durable, portable tool that handles a broad range of chain sizes without buying multiple specialty tools. Avoid using excessive force or improper pin sizes; follow the included instructions for safe, accurate chain removal and reassembly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit handle motorcycle chains?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits many motorcycle drive chains from #35 up to #630 using the included pins and anvils.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the case suitable for workshop transport?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The heavy-duty blow-molded case protects tools and keeps all 13 pieces organized for travel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67591074906297,"sku":"B08977XZ4N","price":64.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-view-red-case.jpg?v=1790540707"},{"product_id":"dayuan-motorcycle-flywheel-puller-kit-10-piece-sizes-for-motorcycles-scooters-atvs-heat-treated-steel-case","title":"DAYUAN Motorcycle Flywheel Puller Kit — 10-Piece Sizes for Motorcycles Scooters ATVs, Heat-Treated Steel Case","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN's 10-piece flywheel puller kit provides a compact, versatile set of right- and double-ended pullers designed to remove flywheels and stators from small engines on motorcycles, scooters, ATVs and dirt bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you service small engines regularly or perform occasional maintenance, the right puller makes removal safe and efficient. This DAYUAN set includes five single-ended and five double-ended pullers in a range of thread sizes to fit many common motorcycle and ATV flywheel nuts and stator hubs. Built from heat-treated steel with a black oxide finish and packed in a molded case, the kit keeps parts organized and ready for the shop or roadside repairs.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and vehicles will this DAYUAN puller set fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit covers a broad variety of motorcycles, scooters, dirt bikes and ATVs that use threaded flywheel or stator hubs. Verify the thread size and handedness (left- or right-hand thread) on your flywheel before use; only the M27x1.0 item is left-hand thread, all others are right-hand.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many small four-stroke and two-stroke engines used on bikes and ATVs.\u003c\/li\u003e\n  \u003cli\u003eIncludes sizes that match common OEM flywheel threads and stator adapters.\u003c\/li\u003e\n  \u003cli\u003eUseful for vintage and modern models that employ threaded puller interfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose the correct puller size and thread orientation?\u003c\/h3\u003e\n\u003cp\u003eInspect the flywheel hub to determine the outside diameter and thread pitch; if possible, measure the thread or consult the service manual. Match that thread pitch and diameter to the list in the kit and note that only one piece (M27x1.0) is left-hand; all other pieces are right-hand threads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdentify thread pitch (e.g., M14x1.5, M28x1.5) and handedness on your flywheel.\u003c\/li\u003e\n  \u003cli\u003eUse single-ended pullers for simpler hub fittings and double-ended for multiple applications.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, compare the puller to the hub threads visually or with a thread gauge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction ensure durability and safe use?\u003c\/h3\u003e\n\u003cp\u003eEach puller is manufactured from quality steel and finished with a black oxide coating to resist corrosion and reduce glare. The hardened steel construction gives the tools strength to withstand the torsional forces during flywheel extraction, while the molded storage case protects parts and keeps them organized between jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated steel cores for strength under load.\u003c\/li\u003e\n  \u003cli\u003eBlack oxide surface finish for rust resistance and reduced wear.\u003c\/li\u003e\n  \u003cli\u003eSturdy blow-molded case for secured transport and storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the pullers safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eFollow the engine maker’s service instructions and ensure the ignition is disabled before beginning. Thread the correct puller into the flywheel hub until it seats flush, then apply steady, even force using the puller’s center bolt to extract the flywheel without damaging splines or crank journals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisable ignition and remove spark plug for safety before starting.\u003c\/li\u003e\n  \u003cli\u003eHand-thread to confirm correct engagement, then tighten center bolt gradually.\u003c\/li\u003e\n  \u003cli\u003eUse penetrating oil if the flywheel is seized and avoid sudden impact blows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The DAYUAN flywheel puller kit is aimed at motorcycle mechanics, ATV and dirt bike enthusiasts, mobile repair technicians and home DIYers who need a reliable, compact set that covers many common thread sizes. It’s especially useful for shops that service multiple brands or collectors working on a range of older and newer machines. The molded case and varied thread options make it a practical addition to any small-engine tool kit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the set include left-hand threaded pullers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only the M27x1.0 piece is left-hand threaded; all other pullers in the kit are right-hand threads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit handle seized flywheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — with proper technique: disable ignition, use penetrating oil, and apply steady force via the puller’s center bolt.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67591156072633,"sku":"B0895MR871","price":79.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging_53eeac2a-555c-42f6-83e7-ff2815d2dca7.jpg?v=1790542619"},{"product_id":"dayuan-motorcycle-chain-breaker-set-13-piece-cutter-riveter-blue-case-hardened-steel-for-35-630","title":"DAYUAN Motorcycle Chain Breaker Set — 13‑Piece Cutter \u0026 Riveter, Blue Case, Hardened-Steel for #35–#630","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN's 13-piece Motorcycle Chain Breaker Set is a compact chain cutter and riveter kit that removes and reinstalls #35–#630 chains for motorcycles, bikes and ATVs with a hardened-steel press and a durable blue carrying case.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one chain service kit gives you the tools to split, push out pins, and rivet a wide range of drive chains without needing multiple shop visits. Built from hardened steel for consistent force and housed in a blow-molded blue case for neat storage, the set is aimed at riders and mechanics who want a portable, dependable chain tool for roadside repairs or garage maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the chain press remove pins from different chain sizes?\u003c\/h3\u003e\n\u003cp\u003eThe press uses interchangeable pins and anvils to match the pin diameter and link spacing of many common chains. By aligning the chain in the tool and tightening the handle, the kit forces the link pin out cleanly without damaging outer plates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with chain sizes from #35 up to #630\u003c\/li\u003e\n  \u003cli\u003eThree pin sizes included: 2.2mm, 2.9mm and 3.8mm for accurate fit\u003c\/li\u003e\n  \u003cli\u003eThree anvils and two press plates to support various link types\u003c\/li\u003e\n  \u003cli\u003eHardened-steel construction for reliable pin compression\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts come in the 13-piece set and how do you use them?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the press body, detachable handle and lever, riveter, spring and a selection of pins, anvils and plates, all organized in a molded carrying case. Basic use involves loosening the sprocket, positioning the chain in the press, and turning the handle to push the pin out — instructions are intuitive for anyone familiar with chain work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: chain press, handle, lever, riveter, spring, three anvils, three pins, two press plates\u003c\/li\u003e\n  \u003cli\u003eCompact blow-molded case: 4.8\" x 3\" x 8.5\" (12.2 × 7.6 × 21.6 cm)\u003c\/li\u003e\n  \u003cli\u003eTool operation: align chain, tighten to drive out pin, then use riveter to reform link\u003c\/li\u003e\n  \u003cli\u003ePortable and organized for roadside or home use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this tool durable and suitable for repeated repairs?\u003c\/h3\u003e\n\u003cp\u003eThe principal components are made from hardened steel to withstand the high compressive forces needed to press out chain pins and set rivets. The robust materials and protective case mean the kit holds up well to repeated use and transport between shop and trail.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened-steel body and pins resist bending and wear\u003c\/li\u003e\n  \u003cli\u003eProtective blow-molded plastic case prevents part loss and damage\u003c\/li\u003e\n  \u003cli\u003eSimple replacement parts (pins\/anvils) reduce downtime\u003c\/li\u003e\n  \u003cli\u003eDesigned for both occasional roadside fixes and routine workshop maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, home mechanics and small shops that work on motorcycles, bicycles, ATVs or OHV cam chains and need a compact, versatile chain tool. If you want a single, transportable kit that handles a wide range of chain sizes and gives you both cutting and riveting capability, the DAYUAN 13-piece set delivers the core hardware and storage to carry out dependable chain repairs without bulky equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which chain sizes does this kit support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The DAYUAN kit fits chains from #35 through #630 using included pins and anvils for correct alignment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a carrying case?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it comes in a 4.8\" x 3\" x 8.5\" blow-molded blue carrying case for storage and transport.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67591236714681,"sku":"B0FPC53SDL","price":64.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-chain-breaker-front-case.jpg?v=1790544751"},{"product_id":"dayuan-engine-oil-pressure-test-kit-80mm-dual-scale-gauge-1200mm-hose-10-adaptors","title":"DAYUAN Engine Oil Pressure Test Kit — 80mm Dual-Scale Gauge, 1200mm Hose, 10 Adaptors","description":"\u003cb\u003eDAYUAN Engine Cylinder Oil Pressure Diagnostic Tester Tool Set is a complete oil-pressure test kit that measures pump output and checks low-oil warning circuits with durable fittings and a protected dual-scale gauge.\u003c\/b\u003e\n\n\u003cp\u003eThis compact kit supplies everything a mechanic or DIYer needs to diagnose oil pressure issues: a shock-resistant 80mm gauge, 1200mm of hose with quick couplings, a 90° adaptor for tight spots, and ten threaded adaptors covering common metric and imperial oil switch ports. The components are organized in a blow-molded case so you can carry the set to the shop or roadside repairs without losing fittings.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tool measure engine oil pressure accurately?\u003c\/h3\u003e\n\u003cp\u003eThe set uses a dual-scale, shock-proof gauge that reads 0–10 bar (0–140 PSI) so you can interpret results in metric or imperial units. A heavy-duty protective cover reduces needle bounce and extends gauge life, delivering steadier, more reliable readings when connected to the oil gallery or sensor port.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e80mm diameter dual-scale gauge for clear visibility\u003c\/li\u003e\n  \u003cli\u003eShock-resistant cover to stabilize readings and protect the face\u003c\/li\u003e\n  \u003cli\u003ePrecision fittings to reduce leak points during measurement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich adaptors and connections are included for different engines?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains ten adaptors that match common oil switch and sensor thread standards, so you can work on import and domestic engines without improvising. Quick-coupling fittings and the long hose let you reach deep or awkwardly placed ports while keeping the gauge accessible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetric sizes: M10×1.0, M12×1.5, M14×1.5, M16×1.5, M18×1.5\u003c\/li\u003e\n  \u003cli\u003eImperial\/NPT\/UNF sizes: 1\/8\"×27 NPT, 1\/4\"×18 NPT, 3\/8\"×20 UNF, 1\/2\"×20 UNF, R 1\/8\"\u003c\/li\u003e\n  \u003cli\u003eQuick couplings and a 90° adaptor for limited-access ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I test hard-to-reach oil switch ports with this kit?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit was designed for limited access scenarios. A 1200mm hose combined with a 90° coupling adaptor allows you to route the gauge to a convenient spot while the probe reaches recessed sensor ports or tight engine bays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1200mm hose for extended reach and flexible positioning\u003c\/li\u003e\n  \u003cli\u003e90° coupling adaptor to access angled or obstructed ports\u003c\/li\u003e\n  \u003cli\u003eSecure quick-connects to avoid oil spray and leaks during testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this kit practical for storage and regular workshop use?\u003c\/h3\u003e\n\u003cp\u003eThe DAYUAN set is supplied in a blow-molded case sized 39 × 31 × 8.5 cm that keeps each adaptor and hose in its place so the kit is ready when you need it. Durable components and a protected gauge reduce maintenance and replacement frequency, making it a sensible workshop investment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlow-molded case organizes components and simplifies transport\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty gauge cover and metal adaptors withstand shop environments\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits toolbox shelves and service vans\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, mobile mechanics, and knowledgeable DIY enthusiasts who diagnose oil-pump health, confirm oil pressure warnings, or troubleshoot engine lubrication issues. If you frequently test multiple vehicle types or need a portable, reliable pressure-measurement solution with wide thread coverage and an extended hose, this DAYUAN kit delivers the fittings and gauge clarity required for repeatable diagnostics.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit measure in PSI and bar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The gauge is dual-scale and reads 0–10 bar and 0–140 PSI for both metric and imperial measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the adaptors fit my vehicle's oil switch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Probably—kit includes common metric and imperial threads. Check your oil switch thread size against the adaptor list before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67591372079289,"sku":"B07JGKN7Y8","price":79.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-view-kit-open.jpg?v=1790549045"},{"product_id":"dayuan-windshield-remover-tool-set-7-piece-classic-vintage-braided-cutting-wire-wire-feeder","title":"DAYUAN Windshield Remover Tool Set 7‑Piece Classic Vintage — braided cutting wire \u0026 wire feeder","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN's 7-piece Classic Vintage Car Windshield Remover Tool Set is a heavy-duty kit made to safely loosen and extract bonded windshields and interior trim on a wide range of vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional-grade kit assembles the essential hand tools technicians need to separate automotive glass and trim from body openings without damage to surrounding panels. The set combines braided cutting wire, dual handles, a wire-feeder, a gasket knife, a trim pad lifter and a molding release implement designed for speed and control when negotiating polyurethane adhesives and vinyl gaskets. Components are built for repeated use on classic and modern cars, making the set useful in restoration shops, body shops and DIY projects.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit remove a windshield without harming paint or trim?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses a thin, braided galvanised steel cutting wire routed around the windshield bead to slice through adhesive while handles and a wire feeder control tension and position. The gasket knife and molding release tool help separate rubber seals and prevent gouging of paint or interior panels when used correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-strand braided galvanised steel wire for clean, controlled cutting\u003c\/li\u003e\n  \u003cli\u003eWire feeder tool that guides wire under bonded polyurethane without tearing upholstery\u003c\/li\u003e\n  \u003cli\u003eRubber gasket knife for gentle separation of seals\u003c\/li\u003e\n  \u003cli\u003eMolding release tool to pry trim without scratching painted edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich parts are included and what is each for?\u003c\/h3\u003e\n\u003cp\u003eThe set contains seven purpose-built pieces to cover each step of a windshield removal: cutting, feeding, gripping and prying. Every item focuses on a specific task so technicians can work faster and reduce the risk of glass breakage or panel damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCutting wire — braided for strength and consistent slicing through adhesive\u003c\/li\u003e\n  \u003cli\u003eTwo wire-gripping handles — secure the wire loop for steady cutting motion\u003c\/li\u003e\n  \u003cli\u003eWire feeder tool — inserts wire beneath adhesive and behind moldings\u003c\/li\u003e\n  \u003cli\u003eRubber gasket knife — separates vinyl gaskets from glass and frame\u003c\/li\u003e\n  \u003cli\u003eTrim pad remover — lifts door panels and fasteners safely\u003c\/li\u003e\n  \u003cli\u003eMolding release tool — pries retainers and trim without marring finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use for a single technician or hobbyist?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for one-person operation: the handles and feeder let a single operator route and tension the wire while cutting. Clear, repeatable movements and durable materials shorten learning time, though practice on scrap glass or an old seal is recommended first.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo ergonomic handles for one-person wire control\u003c\/li\u003e\n  \u003cli\u003eWire feeder simplifies threading under polyurethane and moldings\u003c\/li\u003e\n  \u003cli\u003eSturdy tools reduce slipping and accidental damage during use\u003c\/li\u003e\n  \u003cli\u003eSuitable for experienced pros and careful DIY restorers after practice\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? Auto body technicians, restoration enthusiasts, and mobile glass installers who need a compact, complete set to remove windshields and trim reliably will find this DAYUAN kit valuable. It’s especially useful for classic car restoration where original rubber gaskets and delicate moldings require controlled prying and clean adhesive cutting. If you repair multiple vehicle types or perform occasional windshield work, this heavy-duty 7-piece set supplies the specialized tools to get the job done with less risk to glass, seals, and painted surfaces.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one person remove a windshield with this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The handles and wire feeder are designed for one-person operation when used carefully and with proper technique.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the cutting wire reusable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The braided galvanised wire is reusable for multiple jobs, though replace if it shows kinks, fraying, or reduced cutting performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67591410122937,"sku":"B078BJ198B","price":75.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging-classic-windshield-tool-set.jpg?v=1790550067"},{"product_id":"dayuan-alternator-freewheel-pulley-tool-kit-13pcs-bosch-magneti-marelli-fit-cr-v-sockets-for-audi-bmw-vw","title":"DAYUAN Alternator Freewheel Pulley Tool Kit 13Pcs — Bosch \u0026 Magneti Marelli Fit, Cr-V Sockets for Audi BMW VW","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN's 13-piece alternator freewheel pulley tool kit is a complete, workshop-grade set built to remove and install Bosch and Magneti Marelli style alternator decouplers on many European vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional kit gathers the specialized sockets, adaptors and connectors technicians need to service one-way clutch (OWC) and overlay alternator decoupler (OAD) pulleys without improvising. Machined from chrome-vanadium with protective finishes, the set covers common spline, star and hex fittings used on Audi, BMW, Fiat, Ford, Mercedes, Renault and VW alternators so you can work faster and cleaner whether in a garage or mobile service van.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and alternator types will this kit work with?\u003c\/h3\u003e\n\u003cp\u003eThe DAYUAN 13-piece kit targets alternators using Bosch and Magneti Marelli fittings and is compatible across many European makes. It supports both freewheel\/one-way clutch and OAD pulleys commonly found on the listed models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Bosch and Magneti Marelli alternator pulley styles\u003c\/li\u003e\n  \u003cli\u003eCompatible makes: Audi, BMW, Fiat, Ford, Mercedes, Renault, VW\u003c\/li\u003e\n  \u003cli\u003eCovers both on-vehicle and off-vehicle pulley servicing\u003c\/li\u003e\n  \u003cli\u003eIncludes parts for a range of common pulley configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat specific tools and sizes are included in the set?\u003c\/h3\u003e\n\u003cp\u003eThe set contains specialist sockets and adaptors to address the full removal and installation process for decoupled alternator pulleys. Each component is labeled for quick selection and built for repeated workshop use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM10 spline socket, 1\/2\" drive (for Bosch alternators)\u003c\/li\u003e\n  \u003cli\u003eT50 star socket, 1\/2\" drive (Bosch access)\u003c\/li\u003e\n  \u003cli\u003eHex sockets: 10 mm and 8 mm for locking bolts\u003c\/li\u003e\n  \u003cli\u003eSpline sockets: M8 and M10 for alternate pulley splines\u003c\/li\u003e\n  \u003cli\u003eStar sizes: T40 and T50 to handle different fasteners\u003c\/li\u003e\n  \u003cli\u003e1\/2\" drive to hex adapter, two pulley connectors and two additional adaptors for wider fitment\u003c\/li\u003e\n  \u003cli\u003eTwo specialist 33-tooth union sockets designed for secure engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit improve workshop efficiency and job quality?\u003c\/h3\u003e\n\u003cp\u003eHaving the correct sockets and adaptors significantly reduces time spent searching for compatible tools or improvising with suboptimal parts. The kit's durable materials and finish resist wear, helping preserve fastener faces and speeding up repeat jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces vehicle downtime by enabling quicker alternator pulley swaps\u003c\/li\u003e\n  \u003cli\u003eProtects bolt heads and splines with precision-fit sockets\u003c\/li\u003e\n  \u003cli\u003eWorks both on-vehicle and with alternators removed for flexible workflows\u003c\/li\u003e\n  \u003cli\u003eDurable Cr-V construction with black oxide and polished coating extends tool life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these tools for DIY home repairs as well as professional service?\u003c\/h3\u003e\n\u003cp\u003eYes. While the kit is built to withstand commercial use, it's also accessible for experienced DIYers who want the right tools for alternator pulley replacement. Clear sizing and included adaptors reduce the chance of incorrect fits that can damage parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for experienced home mechanics repairing compatible makes\u003c\/li\u003e\n  \u003cli\u003eDetailed size range minimizes guesswork during part selection\u003c\/li\u003e\n  \u003cli\u003eRobust finish tolerates occasional exposure to workshop conditions\u003c\/li\u003e\n  \u003cli\u003eCompact 13-piece format is easy to store in a tool chest or van\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you are a professional mechanic, mobile technician or a capable DIYer working on European cars with Bosch or Magneti Marelli alternators, this DAYUAN kit supplies the sockets and adaptors needed to service modern decoupled alternator pulleys. It is intended for mechanical repair tasks—replacement, removal and installation of freewheel\/OAD pulleys—and is not a universal set for every vehicle make. Choose this kit when you need accurate engagement, durable components and comprehensive size coverage for common alternator pulley fasteners.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit non-European alternators?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit targets Bosch and Magneti Marelli styles common on European makes; it may not fit other brands or uncommon alternator designs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the sockets durable for repeated professional use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The chrome-vanadium construction with black oxide and polished coating is made for long-term workshop use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67591466451129,"sku":"B07QNVR2HL","price":79.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging-parts-layout.jpg?v=1790552198"},{"product_id":"dayuan-ball-joint-separator-set-3-piece-tie-rod-pitman-arm-pullers-heat-treated-steel","title":"DAYUAN Ball Joint Separator Set 3-Piece — Tie Rod \u0026 Pitman Arm Pullers, Heat-Treated Steel","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN 3-piece ball joint separator set is a compact front-end service kit for removing ball joints, outer tie rod ends, and pitman arms without hammering or damaging surrounding parts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines three commonly used pullers and separators in one compact package so you can tackle steering and suspension disassembly on many domestic and imported front-wheel-drive vehicles. Each tool is heat-treated and corrosion-resistant, designed to withstand the high leverage and torque required when separating press-fit joints. The set saves time and reduces the risk of damaging control arms, boots, or tie rods compared with improvised methods such as hammers and screwdrivers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit remove ball joints without harming nearby components?\u003c\/h3\u003e\n\u003cp\u003eThe press-style separator and scissor\/cup designs apply controlled force directly to the joint stud and cup, avoiding shock to the control arm and boot. Because the force is gradual and directed, seals and grease fittings are less likely to be torn or punctured during removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePress-type separator centers force on the stud for clean separation.\u003c\/li\u003e\n  \u003cli\u003eScissor\/cup design grips the joint cup, minimizing contact with surrounding parts.\u003c\/li\u003e\n  \u003cli\u003eBlack-oxide finished forcing bolts resist galling and reduce tool fatigue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this set fit my vehicle’s steering and suspension parts?\u003c\/h3\u003e\n\u003cp\u003eThe three included tools cover the most common ball joint, tie rod end, and pitman arm sizes found on many passenger cars and light trucks. However, verification is recommended because some applications require larger specialty tools or adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree tools: press-type separator, ball joint splitter, and conical pitman-arm puller.\u003c\/li\u003e\n  \u003cli\u003eDesigned for a broad range of domestic and imported front-wheel-drive vehicles.\u003c\/li\u003e\n  \u003cli\u003eMeasure joint stud and cup dimensions against tool clearances before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes ensure durability for professional or DIY use?\u003c\/h3\u003e\n\u003cp\u003eEach tool is manufactured from heat-treated steel for strength under repeated leverage and impact. An anti-rust plating on the body and black-oxidized forcing bolts improve corrosion resistance and extend service life in workshop environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated steel construction for high tensile strength.\u003c\/li\u003e\n  \u003cli\u003eAnti-rust plating prevents surface corrosion in storage and use.\u003c\/li\u003e\n  \u003cli\u003eBlack-oxidized bolts reduce rust and sticking during heavy use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare and use the kit safely?\u003c\/h3\u003e\n\u003cp\u003eProper setup and measurement are key: jack and support the vehicle securely, remove wheel and clearance components as required, and identify the correct separator for the joint. Apply steady torque with an appropriate wrench or ratchet, and avoid using damaged or undersized tools that could slip or break.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlways support the vehicle on jack stands before working.\u003c\/li\u003e\n  \u003cli\u003eMeasure ball joint diameter to confirm tool fit prior to purchase.\u003c\/li\u003e\n  \u003cli\u003eUse matched hand tools and torque evenly to prevent slippage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN 3Pcs Ball Joint Separator Set is built for professional mechanics, home-garage DIYers, and fleet technicians who need a reliable, compact set for routine front-end repairs. It’s ideal for shops and individuals who want to minimize part damage during disassembly and speed up tie rod, ball joint, and pitman arm removal across a range of common vehicles. If your repair calls for larger specialty extractors, verify fitment first or supplement the set with appropriate adapters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this set remove both inner and outer tie rod ends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit targets outer tie rod ends and common ball joints; inner tie rods may need specialized tools depending on vehicle design.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the forcing bolts resistant to rust and seizing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the forcing bolts have black-oxide treatment to reduce rust and lower the chance of seizing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67591583400121,"sku":"B09ZXPDCJ3","price":83.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging-ball-joint-separator.jpg?v=1790555692"},{"product_id":"dayuan-harmonic-balancer-flywheel-puller-set-46pc-heat-treated-alloy-yoke-swivel-screw","title":"DAYUAN Harmonic Balancer \u0026 Flywheel Puller Set 46Pc — Heat‑Treated Alloy Yoke, Swivel Screw","description":"\u003cb\u003eDAYUAN 46-piece Harmonic Balancer Puller Set is a complete, heat-treated alloy puller kit designed to remove harmonic balancers, flywheels and steering wheels for both two- and three-hole applications.\u003c\/b\u003e\n\n\u003cp\u003eThis compact kit brings professional-style removal tools to home garages and workshops. The set combines a robust yoke, a pressure screw with a floating swivel, and 30 interchangeable bolts stored in a molded case so you can tackle a wide range of vehicles and pulleys without hunting for adapters. Built for durability and accurate force application, the DAYUAN puller helps you avoid shaft damage and speeds up disassembly of crank pulleys and steering components.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this puller handle different vehicle bolt patterns?\u003c\/h3\u003e\n\u003cp\u003eThe included yoke features four yoke slots that let you configure the tool for two-hole or three-hole pull applications, plus use with different bolt lengths. Swapping bolts is fast, and the molded case keeps all sizes organized so you can match the puller to the component quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour yoke slots support multiple hole patterns and clear alignment.\u003c\/li\u003e\n  \u003cli\u003e30 bolt sizes cover common diameters and thread pitches.\u003c\/li\u003e\n  \u003cli\u003eMolded case organizes bolts for quick selection.\u003c\/li\u003e\n  \u003cli\u003eAdapters and bolts fit both small pulleys and larger flywheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features protect the shaft or threaded studs during removal?\u003c\/h3\u003e\n\u003cp\u003eThe set uses a pressure screw with a floating swivel that centers on the shaft and reduces side loading, minimizing the risk of scoring or bending the crankshaft or steering column end. The yoke is heat-treated alloy steel to resist bending under load, keeping the pulling force aligned and controlled.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFloating swivel on the pressure screw prevents concentrated stress.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated alloy steel yoke resists deformation under torque.\u003c\/li\u003e\n  \u003cli\u003eThreaded pulling bolts distribute load across attachment points.\u003c\/li\u003e\n  \u003cli\u003eControlled pressure application reduces risk of sudden component release.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich parts are included and how are they organized?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains a heat-treated yoke, the pressure screw assembly with swivel head, and 30 different bolts to suit a wide range of attachment patterns. Everything fits in a molded storage case that keeps components secure and visible so you can inventory the kit at a glance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne heat-treated alloy steel yoke for strength and fit.\u003c\/li\u003e\n  \u003cli\u003ePressure screw with floating swivel to protect shafts.\u003c\/li\u003e\n  \u003cli\u003e30 different bolts for two- and three-hole patterns.\u003c\/li\u003e\n  \u003cli\u003eMolded storage case for organized transport and storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the DAYUAN puller safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eChoose the correct bolt size for your component, secure the yoke in the matching slot, and run the pressure screw against the shaft center while tightening evenly. Work slowly and keep the assembly aligned; stop if resistance changes suddenly and inspect for misalignment before continuing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelect matching bolt sizes and thread engagement before use.\u003c\/li\u003e\n  \u003cli\u003eSeat the yoke squarely in the chosen slot and center the swivel on the shaft.\u003c\/li\u003e\n  \u003cli\u003eTighten the pressure screw steadily to avoid shock loading.\u003c\/li\u003e\n  \u003cli\u003eInspect fasteners and components between incremental turns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN 46Pcs Harmonic Balancer Puller Set is made for DIY mechanics, independent repair shops, and fleet technicians who need a versatile puller that handles a broad range of cars, light trucks and small engines. If you perform regular engine service, steering repairs, or pulley replacements and want a single organized kit that prevents shaft damage while supporting multiple bolt patterns, this tool set is a practical addition to your toolbox.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this puller work on both two-hole and three-hole pulleys?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The yoke’s four-slot design and included bolts let you configure the tool for two-hole and three-hole patterns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed to protect the crankshaft?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The pressure screw with a floating swivel helps protect the shaft; combined with the heat-treated yoke this minimizes damage risk.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67591686652089,"sku":"B08953THXP","price":79.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging_0245b95e-5920-4dcf-aa7d-17053751c67b.jpg?v=1790557560"},{"product_id":"dayuan-petrol-engine-compression-tester-kit-red-case-3-dual-scale-gauge-multi-adapters","title":"DAYUAN Petrol Engine Compression Tester Kit — Red Case, 3\" Dual-Scale Gauge \u0026 Multi Adapters","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN Professional Petrol Engine Compression Tester Kit is a complete petrol engine compression testing set with a 3\" dual-scale gauge, multiple threaded adapters, and quick-check rubber cones in a durable red case.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit gives you the fittings and readable gauge needed to measure cylinder compression on a wide range of petrol engines. The included 3-inch gauge displays both psi and bar for fast interpretation, and the stamped adapters cover common spark plug thread sizes so you can test many cars, motorcycles, ATVs, and small engines without buying extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use the DAYUAN kit to test cylinder compression?\u003c\/h3\u003e\n\u003cp\u003eTesting with this kit is straightforward: remove the spark plug, attach the proper threaded adapter or rubber cone, crank the engine, and read the peak pressure on the gauge. The kit includes options for both threaded and non-threaded quick checks so you can choose the safest, fastest method for the engine you're working on.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChoose the correct adapter: M10\/M12\/M14\/M18 or 14mm\/18mm spark plug sizes.\u003c\/li\u003e\n  \u003cli\u003eUse rubber cones for quick, non-threaded checks on irregular ports.\u003c\/li\u003e\n  \u003cli\u003eCrank engine to reach peak pressure and read 0–300 psi \/ 0–20 bar on the 3\" gauge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and engines will this compression tester work with?\u003c\/h3\u003e\n\u003cp\u003eThe DAYUAN kit is built to cover most petrol engines that use common spark plug thread sizes and small-engine ports. It’s suited to light vehicles and small-displacement motors where the included adapters fit the plug hole or port geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCars and light trucks with 14mm or 18mm spark plug access.\u003c\/li\u003e\n  \u003cli\u003eMotorcycles, scooters, ATVs, and lawn equipment with M10–M18 threads.\u003c\/li\u003e\n  \u003cli\u003eSmall engines and custom applications using rubber cone checks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the gauge read and how accurate is the display?\u003c\/h3\u003e\n\u003cp\u003eThe 3-inch gauge has a dual-color scale showing 0–300 psi and 0–20 bar, providing clear readings for both imperial and metric users. The larger face improves legibility under garage lighting so you can capture peak readings reliably while cranking the engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\" face with dual scale: easy conversion between psi and bar.\u003c\/li\u003e\n  \u003cli\u003eClear color contrast on the dial for quick visual checks under working conditions.\u003c\/li\u003e\n  \u003cli\u003eRobust construction designed to hold pressure during peak measurement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings and accessories are included in the set?\u003c\/h3\u003e\n\u003cp\u003eThe kit is supplied in a sturdy red carrying case and includes threaded adapters with O-rings, two rubber cone ends for fast checks, and dedicated spark plug adapters so you can begin testing immediately. Fittings cover the most frequently encountered plug hole sizes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThreaded fittings: M10, M12, M14, M18 (male with O-ring).\u003c\/li\u003e\n  \u003cli\u003eSpark plug adapters: 14mm and 18mm for direct plug-hole testing.\u003c\/li\u003e\n  \u003cli\u003eTwo rubber cone ends for non-threaded, quick compression checks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Mechanics, DIYers, and small-engine technicians who need a versatile, portable compression tester capable of handling common petrol engines. If you work on cars, motorcycles, ATVs, lawnmowers, or other petrol-powered equipment and want a single kit that covers multiple thread sizes and provides a clear 0–300 psi readout, this DAYUAN tester set is designed to simplify diagnostics and routine maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this tester measure both psi and bar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 3\" gauge shows dual scales: 0–300 psi and 0–20 bar for quick conversion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit fit motorcycle spark plugs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes M10–M18 fittings plus 14mm and 18mm spark plug adapters for many motorcycles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67592762392761,"sku":"B07BKWPPDR","price":56.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-red-case-open-front-view.jpg?v=1790567750"},{"product_id":"dayuan-petrol-engine-compression-tester-kit-blue-case-with-3-dual-scale-gauge-adapters","title":"DAYUAN Petrol Engine Compression Tester Kit — Blue Case with 3\" Dual-Scale Gauge \u0026 Adapters","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN Professional Petrol Engine Compression Tester Kit is a complete compression-checking set with a 3\" dual-scale gauge (0–300 psi \/ 0–20 bar), multiple threaded fittings and rubber cone adapters packed in a durable blue case.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you service cars, motorcycles, lawn equipment or small petrol engines, accurate compression readings are essential to diagnosing worn rings, leaky valves, or head gasket issues. This kit organizes the most common spark-plug-thread sizes and provides quick-check cone adapters so you can test engines without time-consuming disassembly. The compact, foam-cut blue case keeps components secure and ready for mobile or garage use.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use the DAYUAN kit to test a petrol engine's compression?\u003c\/h3\u003e\n\u003cp\u003eTesting is straightforward: remove the spark plug, screw the correct threaded adapter into the plug hole or fit a rubber cone for quick checks, crank the engine with the throttle wide open, and read the gauge peak. Repeat for each cylinder and compare readings to the manufacturer's spec and to each other to identify weak cylinders.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelect the matching adapter (M10, M12, M14, M18 or included 14mm\/18mm spark plug adapters).\u003c\/li\u003e\n\u003cli\u003eAttach the gauge securely to avoid leaks; use a cone adapter for non-threaded checks.\u003c\/li\u003e\n\u003cli\u003eCrank 4–6 compression strokes while watching the gauge to record peak pressure.\u003c\/li\u003e\n\u003cli\u003eNote pressure differences between cylinders; a drop \u0026gt;10–15% indicates a potential fault.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fittings and adapters are included and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe set includes male-threaded fittings in M10, M12, M14 and M18 sizes (each with an O-ring), plus dedicated 14mm and 18mm spark plug adapters and two rubber cone ends. These cover most petrol engine spark plug thread types and allow testing on varied equipment without modifying parts.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM10, M12, M14, M18 male fittings with O-rings for a gas-tight seal.\u003c\/li\u003e\n\u003cli\u003e14mm and 18mm spark plug adapters for common automotive and motorcycle plugs.\u003c\/li\u003e\n\u003cli\u003eTwo rubber cone adapters for fast checks or damaged threads.\u003c\/li\u003e\n\u003cli\u003e3\" gauge with dual color 0–300 psi \/ 0–20 bar scale for clear readings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the 3-inch dual-scale gauge tell me and how accurate is it?\u003c\/h3\u003e\n\u003cp\u003eThe 3\" dial shows both psi (0–300) and bar (0–20) so you can read results in the unit your service manual uses. The large face and color-coded zones make it simple to spot low or healthy compression at a glance; consistent technique is essential for reliable comparisons between cylinders.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual scale displays psi and bar simultaneously for easy reference.\u003c\/li\u003e\n\u003cli\u003eColor-coded segments highlight common pressure ranges at a glance.\u003c\/li\u003e\n\u003cli\u003eLarge 3\" face improves visibility during roadside or bench testing.\u003c\/li\u003e\n\u003cli\u003eUse identical starting conditions per cylinder for the most consistent results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DAYUAN compression tester kit suits professional mechanics, mobile technicians, motorcycle and small-engine hobbyists, and DIYers who perform routine diagnostics. If you need a portable, organized solution that covers a wide range of spark plug threads and offers both threaded and non-threaded testing options, this kit delivers reliable readings and fast setup in a rugged blue carrying case.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this kit on motorcycles and lawn mowers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The included adapters and cone fittings cover common spark plug sizes and small engines for motorcycles, lawn mowers, and similar petrol equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a separate adapter for each spark plug thread?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You only need the matching adapter from the kit; it includes M10, M12, M14, M18 plus 14mm and 18mm plug adapters.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67592765997241,"sku":"B08MVSJJZK","price":56.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-blue-case-front-closed.jpg?v=1790567801"},{"product_id":"dayuan-disc-brake-caliper-piston-rewind-tool-kit-22-piece-universal-set-with-18-adapters-magnetic-spindle","title":"DAYUAN Disc Brake Caliper Piston Rewind Tool Kit — 22‑Piece Universal Set with 18 Adapters \u0026 Magnetic Spindle","description":"\u003cp\u003e\u003cstrong\u003eThe DAYUAN Disc Brake Caliper Piston Rewind Tool Kit Set is a 22-piece, universal caliper piston rewind kit designed to safely retract and rotate brake calipers for pad replacement on most cars, trucks, and 4x4s.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re a home mechanic or a professional technician, this complete kit supplies the adapters and hardware needed to compress and rotate a wide variety of caliper pistons. The set combines a left‑hand and right‑hand thrust assembly, multiple drive adapters, reaction plates, and a molded storage case so you can keep parts organized and work without improvising. Components are treated for corrosion resistance and built to handle repeated use in a garage environment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit make brake pad replacement easier?\u003c\/h3\u003e\n\n\u003cp\u003eThe DAYUAN kit centralizes everything required to wind back caliper pistons and hold drive keys securely, eliminating the need for improvised tools or makeshift clamping. Using the correct adapter reduces the risk of damaging piston faces or rubber seals while giving steady, controlled compression for smooth pad installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes 18 different adapters to match most piston shapes and sizes.\u003c\/li\u003e\n  \u003cli\u003eLeft- and right-hand thrust bolts let you rotate pistons in either direction when needed.\u003c\/li\u003e\n  \u003cli\u003eMagnetic spindle keeps adapter keys in place to prevent slips and dropped parts.\u003c\/li\u003e\n  \u003cli\u003eReaction plates distribute force to avoid stressing the caliper housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and piston types will this set fit?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit was made for broad compatibility with passenger cars, light trucks, and many four-wheel-drive models. With a large selection of drive bits and two reaction plates, it adapts to round, square, and keyed piston faces used by numerous manufacturers. While it covers most common designs, always compare adapter shapes to your caliper before starting.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e18 adapters included to match varied piston face profiles.\u003c\/li\u003e\n  \u003cli\u003eSuitable for most cars, trucks, SUVs, and many 4x4 brake calipers.\u003c\/li\u003e\n  \u003cli\u003eMagnetic thrust bolt assemblies hold drive keys firmly during rotation.\u003c\/li\u003e\n  \u003cli\u003eNot guaranteed for highly specialized or manufacturer‑specific-unique calipers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and precise are the components in this kit?\u003c\/h3\u003e\n\n\u003cp\u003eDAYUAN builds the major pieces from 45# carbon steel with a rust-resistant finish, so the clutch points and spindles withstand repeated torque and garage conditions. The magnetic hand thrust bolt secures adapters in place, helping maintain alignment and preventing slippage that could round off key edges or mar piston faces.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e45# carbon steel construction for professional-grade wear resistance.\u003c\/li\u003e\n  \u003cli\u003eRust-resistant finish extends service life in humid workshop environments.\u003c\/li\u003e\n  \u003cli\u003eMagnetic hand thrust bolt reduces adapter movement and accidental drops.\u003c\/li\u003e\n  \u003cli\u003eSturdy molded storage case keeps components organized and protected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the left- and right-hand spindle assemblies safely?\u003c\/h3\u003e\n\n\u003cp\u003eStart by identifying the piston face and choosing the matching adapter, then attach the adapter to the thrust bolt and seat the reaction plate against the caliper. Use the left- or right-hand spindle assembly to rotate the piston the necessary direction while keeping steady pressure to prevent seal distortion. Move slowly and check piston alignment frequently during the process.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSelect the correct adapter and fit it securely to the thrust bolt.\u003c\/li\u003e\n  \u003cli\u003ePosition the reaction plate to transfer force evenly across the caliper.\u003c\/li\u003e\n  \u003cli\u003eRotate the spindle slowly; stop if resistance becomes irregular.\u003c\/li\u003e\n  \u003cli\u003eVerify piston retraction and seal integrity before installing new pads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This DAYUAN 22-piece caliper piston rewind kit is aimed at DIY enthusiasts, mobile mechanics, and repair shops that service a range of passenger vehicles and light trucks. It’s particularly useful if you routinely replace pads and need a compact, organized toolkit that handles both common piston shapes and left\/right rotation requirements without improvisation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit work on both left- and right-turning caliper pistons?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes left- and right-hand thrust bolt assemblies so you can rotate pistons in either direction.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the adapters magnetic to prevent slipping?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each thrust bolt assembly has a built-in magnet to hold drive adapters securely during use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67592993177785,"sku":"B075K7K9WW","price":75.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-caliper-tool-front-packaging.jpg?v=1790570741"},{"product_id":"dayuan-pickle-fork-removal-kit-5-piece-3-forks-2-handles-chrome-vanadium-steel-case","title":"DAYUAN Pickle Fork Removal Kit 5-Piece — 3 Forks + 2 Handles, Chrome Vanadium Steel Case","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN's 5-piece pickle fork set is a complete ball joint, tie rod, and pitman arm separation kit with three interchangeable forks, two handles (for hammer and air hammer), and a protective carry case.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional-grade removal kit is built for mechanics and DIYers who need a reliable way to separate stubborn suspension and steering components without damaging threads or nearby parts. Each fork is made from chrome vanadium steel for strength and wear resistance, and the two handle options—knurled striking handle for conventional hammers and an adapter for air hammers—fit every fork to give you flexibility on the job. The compact molded case keeps everything organized and ready at the bench or in the truck.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit make removing ball joints and tie rods easier?\u003c\/h3\u003e\n\u003cp\u003eThe kit provides purpose-made forks sized to match common suspension fittings so you can apply force cleanly where it’s needed. The piloted handles reduce shock to threaded components and let you choose between a conventional hammer or pneumatic impact tool depending on the situation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBall joint separator with a 15\/16\" (23.8 mm) jaw for common stud sizes\u003c\/li\u003e\n  \u003cli\u003eTie rod spreader with an 11\/16\" (17.5 mm) wedge for inner and outer tie rod ends\u003c\/li\u003e\n  \u003cli\u003ePitman arm wedge with a 1-1\/8\" (28.6 mm) opening for larger steering arms\u003c\/li\u003e\n  \u003cli\u003eTwo handles: 7-3\/4\" knurled striking handle and 6-3\/4\" air-hammer adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these tools fit my hammer or air hammer?\u003c\/h3\u003e\n\u003cp\u003eYes—both provided handles are designed to suit standard shop tools. The 7-3\/4\" knurled handle is meant for use with a conventional hammer, while the 6-3\/4\" adapter has a 0.401\" shank to accept typical air-impact hammers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKnurled striking handle for controlled hand-hammer strikes\u003c\/li\u003e\n  \u003cli\u003eAdapter handle with 0.401\" shank fits most air hammers\u003c\/li\u003e\n  \u003cli\u003eBoth handles accept all three forks interchangeably\u003c\/li\u003e\n  \u003cli\u003ePiloted design dampens impact to protect threaded parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable are the forks and handles?\u003c\/h3\u003e\n\u003cp\u003eMaterials and construction focus on longevity for frequent shop use. Forks are forged from chrome vanadium steel to resist bending and wear; the handles are machined for secure fit and impact absorption, extending service life and reducing the chance of damaging component threads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome vanadium steel forks for high tensile strength\u003c\/li\u003e\n  \u003cli\u003ePiloted handles act as shock absorbers to protect threads\u003c\/li\u003e\n  \u003cli\u003eInterchangeable mounting keeps parts versatile and replaceable\u003c\/li\u003e\n  \u003cli\u003eMolded carrying case protects tools during transport and storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and parts are included in the set?\u003c\/h3\u003e\n\u003cp\u003eThe set includes three forks matched to common steering and suspension components plus two different handles to cover both manual and pneumatic removal methods. Everything nests in a compact case for easy storage and transport.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTie rod spreader: 11\/16\" (17.5 mm) wedge opening\u003c\/li\u003e\n  \u003cli\u003eBall joint separator: 15\/16\" (23.8 mm) jaw opening\u003c\/li\u003e\n  \u003cli\u003ePitman arm wedge: 1-1\/8\" (28.6 mm) opening\u003c\/li\u003e\n  \u003cli\u003e7-3\/4\" knurled striking handle and 6-3\/4\" air-hammer adapter, plus carry case\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This DAYUAN 5-piece pickle fork kit is for professional mechanics, home garage enthusiasts, and fleet technicians who need a compact, durable solution for separating ball joints, tie rods, and pitman arms. If you work on passenger cars, light trucks, or service multiple vehicles, the interchangeable forks and dual-handle design give you the versatility to tackle most common steering and suspension separations quickly and with less risk of thread damage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the handles be used with both forks and wedges?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Both handles are interchangeable with all three forks, allowing use with a regular hammer or an air hammer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material are the forks made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The forks are made from chrome vanadium steel for strength and improved durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67593029255353,"sku":"B08M611VRD","price":74.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-kit-overview.jpg?v=1790571145"},{"product_id":"dayuan-o2-oxygen-sensor-socket-set-5-piece-kit-with-7-8-6-point-socket-thread-chasers-for-m18-m12","title":"DAYUAN O2 Oxygen Sensor Socket Set — 5-piece kit with 7\/8\" 6-point socket, thread chasers for M18 \u0026 M12","description":"\u003cp\u003e\u003cstrong\u003eDAYUAN 5-piece O2 oxygen sensor socket set is a complete remover, installer and thread-repair kit built to remove oxygen sensors safely without damaging wires or threads.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you service exhaust systems, the right tooling speeds jobs and protects delicate sensor leads. This DAYUAN kit bundles three purpose-built sockets plus two thread chasers and drive-ready fittings to handle tight clearances, seized sensors and stripped threads on a wide range of modern vehicles. Every piece is sized for common O2 sensors and engineered with side cutouts and long-reach profiles so you can work around heat shields, braces and tight manifolds.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit prevent wire and connector damage when removing an O2 sensor?\u003c\/h3\u003e\n\n\u003cp\u003eThe sockets include side cutouts and slit openings that let the sensor harness exit the socket while you apply torque, so you don't bend or pinch the sensor cable. Using the correct socket profile keeps the sensor body supported and reduces twisting forces on the electrical lead.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSide-cutout sockets allow cable clearance during removal\u003c\/li\u003e\n  \u003cli\u003e6-point 7\/8\" (22mm) opening fits sensor hexes securely\u003c\/li\u003e\n  \u003cli\u003eExtra-deep broach socket reaches recessed sensors without stressing wires\u003c\/li\u003e\n  \u003cli\u003eLow-profile crowfoot design fits tight spaces and protects connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and drive types are included, and which vehicles will they fit?\u003c\/h3\u003e\n\n\u003cp\u003eThe set includes a mix of 3\/8\" and 1\/2\" drive pieces and thread chasers designed for the most common oxygen sensor threads. The 7\/8\" (22mm) 6-point opening matches standard hexagon sensor bodies; the thread chasers handle M18 x 1.5mm and M12 x 1.25mm sizes frequently used on passenger cars and light trucks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 × 3\/8\" drive extra-deep broach socket (3-1\/8\" long)\u003c\/li\u003e\n  \u003cli\u003e1 × 3\/8\" drive low-profile crowfoot socket (1-1\/4\" long)\u003c\/li\u003e\n  \u003cli\u003e1 × 1\/2\" drive offset crowfoot socket (1-15\/16\" long)\u003c\/li\u003e\n  \u003cli\u003e2 × thread chasers: M18 x 1.5mm and M12 x 1.25mm with 3\/8\" drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the set help with seized or damaged sensor threads?\u003c\/h3\u003e\n\n\u003cp\u003eAlongside removal sockets, the kit supplies two thread chasers that clean and restore common sensor threads to allow proper reseating of new sensors. Cleaning the thread before installation reduces the risk of cross-threading or poor sealing when replacing the sensor.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eM18 and M12 chasers clear rust, carbon and damaged threads\u003c\/li\u003e\n  \u003cli\u003e3\/8\" drive chasers attach to a ratchet for controlled hand-turning\u003c\/li\u003e\n  \u003cli\u003eUsing the chasers preserves sensor mounting surfaces for a secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich accessories and workshop scenarios does this kit best serve?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit is built for DIY mechanics, mobile techs and professional shops that encounter a range of sensor locations—from exposed manifold sensors to hard-to-reach downstream and upstream positions. Its combination of deep, low-profile and offset sockets plus thread tools makes it adaptable for on-vehicle repairs, fleet maintenance, and roadside service calls.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorks with ratchets, breaker bars and extensions via 3\/8\" and 1\/2\" drives\u003c\/li\u003e\n  \u003cli\u003eDesigned for both inline and recessed sensor placements\u003c\/li\u003e\n  \u003cli\u003eCompact selection fits into tool chests or mobile service kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Mechanics, home enthusiasts and service technicians who need reliable oxygen sensor removal and thread repair tools that protect sensor wiring and speed replacements. If you frequently replace O2 sensors, service exhaust components or perform emissions-related maintenance, this DAYUAN set supplies the sockets and chasers to tackle tight clearances, seized fittings and damaged threads without improvising or risking connector damage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit the oxygen sensor on my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 7\/8\" (22mm) 6-point opening and included thread chasers support common M18 and M12 sensor sizes on most cars and light trucks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the thread chasers by hand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the M18 and M12 chasers have 3\/8\" drive fittings for controlled hand use with a ratchet or breaker bar.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DAYUAN","offers":[{"title":"Default Title","offer_id":67593851732153,"sku":"B0789C1KPZ","price":53.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dayuan-front-packaging-oxygen-sensor-set.jpg?v=1790579858"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/dayuan-front-packaging-oxygen-sensor-set.jpg?v=1790612599","url":"https:\/\/redleafauto.ca\/collections\/dayuan.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}