{"title":"Delphi","description":"\u003cp\u003eBrowse 31 Delphi products at RedLeaf Auto, including ignition parts, engine \u0026amp; vehicle sensors and fuel system parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"delphi-mass-air-flow-sensor-af10043-direct-fit-maf-sensor-oe-calibrated-for-stable-idle-and-throttle-response","title":"Delphi Mass Air Flow Sensor AF10043 — Direct-Fit MAF Sensor, OE-Calibrated for Stable Idle and Throttle Response","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi AF10043 Mass Air Flow Sensor precisely measures incoming air to help the engine control module achieve the correct air–fuel balance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Delphi AF10043 (MAF sensor) provides accurate airflow data that the engine control unit uses to calculate fuel injection and timing. Built on decades of OE sensor experience, this unit is engineered and tested to match original specifications, restoring smoother idling, consistent throttle response, and predictable drivability when a failing sensor causes rough running or drivability faults.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the AF10043 improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe AF10043 supplies the ECU with consistent, stable airflow readings so fuel delivery and ignition timing stay synchronized with actual intake conditions. Better air measurement helps maintain efficient combustion and reduces the guesswork the ECU would otherwise have to do.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision sensing element calibrated to OE tolerances\u003c\/li\u003e\n  \u003cli\u003eStable signal output across common temperature ranges\u003c\/li\u003e\n  \u003cli\u003eReduces misfires, rough idle, and fuel trim errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the Delphi AF10043 easy to install and replace?\u003c\/h3\u003e\n\u003cp\u003eDelphi designs this MAF sensor as a direct-fit replacement where applicable, minimizing installation steps and avoiding unnecessary part swaps. Most installations require basic hand tools and plug-and-play electrical connection, following vehicle-specific procedures for reset or relearn if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplication-specific form factor for proper fit\u003c\/li\u003e\n  \u003cli\u003eStandard electrical connector compatible with OE harnesses\u003c\/li\u003e\n  \u003cli\u003eInstallation usually performed without intake disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and testing back the AF10043?\u003c\/h3\u003e\n\u003cp\u003eDelphi leverages long-standing OE expertise to design and test the AF10043 for reliable operation under varied driving conditions. Components are validated for signal stability and thermal performance to provide dependable service life comparable to factory equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered sensing elements for temperature resilience\u003c\/li\u003e\n  \u003cli\u003eCalibrated and bench-tested to match original outputs\u003c\/li\u003e\n  \u003cli\u003eManufacturing quality controls derived from OE production\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill replacing a failing MAF sensor fix driveability symptoms?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or faulty MAF sensor with a correct Delphi AF10043 often resolves symptoms caused by inaccurate airflow data, such as unstable idle, hesitation, or diagnostic trouble codes related to air metering. However, a full diagnosis should confirm no other faults exist before replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommonly corrects air-fuel ratio related drivability issues\u003c\/li\u003e\n  \u003cli\u003eHelps clear air metering-related trouble codes when sensor is root cause\u003c\/li\u003e\n  \u003cli\u003eMay require ECU relearn or battery disconnect to refresh fuel trims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi AF10043 is aimed at technicians and vehicle owners seeking a direct-fit, OE-grade replacement MAF sensor to restore accurate airflow measurement. It's suitable for garage repairs, professional workshops, and do-it-yourselfers who want a robust, tested sensor that matches factory performance and simplifies installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote: Delphi products purchased through certain marketplaces may have different warranty terms; review seller warranty details at purchase.\u003c\/em\u003e\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know if the MAF sensor is faulty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Symptoms include rough idle, hesitation, poor fuel economy, or trouble codes for air metering. Run diagnostics to confirm before replacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does AF10043 require calibration after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installations need no special calibration, though an ECU relearn or battery disconnect may help restore optimal fuel trims.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67585036812473,"sku":"B000CGFHBY","price":234.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-af10043-front-view.jpg?v=1790464511"},{"product_id":"delphi-fuel-pump-module-assembly-fg0407-direct-fit-oe-engineered-for-accurate-fuel-gauge","title":"Delphi Fuel Pump Module Assembly FG0407 — Direct-Fit OE-Engineered for Accurate Fuel Gauge","description":"\u003cp\u003e\u003cstrong\u003eDelphi FG0407 Fuel Pump Module Assembly is a direct-fit, OE-engineered fuel delivery module designed to restore proper fuel flow and accurate tank-level readings for compatible vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to Delphi’s long-standing OE standards, the FG0407 fuel pump module combines tested components and modern design refinements to replace worn or failing in-tank fuel modules. Delphi has more than eight decades of experience manufacturing fuel delivery systems and validates this module for fit, fuel-level accuracy, and electrical efficiency, helping technicians and DIYers install a reliable replacement that meets vehicle application requirements.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the FG0407 ensure accurate fuel gauge readings?\u003c\/h3\u003e\n\n\u003cp\u003eThe module uses a float assembly engineered to match original equipment float height and retention characteristics, so the vehicle’s fuel sender signals mimic factory behavior. That helps maintain consistent gauge readings after installation and reduces the chance of erratic level reporting.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFloat geometry matched to OEM specifications for reliable readings\u003c\/li\u003e\n  \u003cli\u003eSecure float retention that prevents premature detachment\u003c\/li\u003e\n  \u003cli\u003ePre-set travel range calibrated to typical tank sender curves\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical and performance benefits does this assembly offer?\u003c\/h3\u003e\n\n\u003cp\u003eDelphi designs the FG0407 with efficient electrical draw in mind, lowering demand on the vehicle’s electrical system while providing steady pump operation. Components are selected for durable operation under normal driving conditions and validated for application compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLower amperage design to reduce strain on wiring and relays\u003c\/li\u003e\n  \u003cli\u003eSturdy electrical connections for consistent current delivery\u003c\/li\u003e\n  \u003cli\u003eTested under simulated service conditions for dependable flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the FG0407 easy to install and matched to my vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eDelphi validates each module for specific vehicle applications to help ensure fit and function; however, correct selection by application code is essential. Installation typically follows standard in-tank module replacement procedures—inspect and clean the tank beforehand for best results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eApplication-validated to match mounting, sealing, and connector styles\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design eliminates need for major modification\u003c\/li\u003e\n  \u003cli\u003eRecommendation to clean fuel tank and inspect harness before install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability testing and materials background support this part?\u003c\/h3\u003e\n\n\u003cp\u003eDelphi subjects its fuel delivery components to extensive durability and corrosive-fuel testing, including multi-mile equivalent cycles and ethanol exposure checks. The FG0407 benefits from proprietary design improvements and materials chosen to resist common in-tank stresses.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTested in long-term simulated service conditions for longevity\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand ethanol-blended fuels and typical contaminant exposure\u003c\/li\u003e\n  \u003cli\u003eBuilt using components informed by Delphi’s OE innovations and patents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Delphi FG0407 Fuel Pump Module Assembly suits technicians, independent repair shops, and hands-on vehicle owners who need a dependable in-tank fuel module replacement that closely mirrors factory specifications. It’s appropriate when the stock fuel pump module shows signs of failure—such as inconsistent fuel pressure, unreliable gauge readings, or electrical performance issues—and when a validated, direct-fit replacement is required. Always confirm the FG0407 matches your vehicle application and follow proper safety and installation procedures when working with the fuel system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this module fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check vehicle application compatibility before ordering; Delphi FG0407 is validated for specific models and must match your exact tank and connector.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Delphi modules come with a seller warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Delphi parts bought on this site do not include Delphi’s standard limited warranty; warranty terms are offered by the seller named in your order.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67585103626425,"sku":"B000HLQBO6","price":369.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-fg0407-front-assembly.jpg?v=1790467357"},{"product_id":"delphi-mass-air-flow-sensor-af10060-direct-fit-maf-with-dual-heated-elements-for-fast-response","title":"Delphi Mass Air Flow Sensor AF10060 - Direct-Fit MAF with Dual Heated Elements for Fast Response","description":"\u003cstrong\u003eThe Delphi AF10060 Mass Air Flow Sensor precisely measures incoming air to help restore correct engine fueling, drivability, and emissions behavior.\u003c\/strong\u003e\n\nThe AF10060 from Delphi is a direct-fit mass air flow (MAF) sensor designed to relay continuous airflow volume and velocity data to the engine control module (ECM). Built with dual heated elements and multiple sensing components, this sensor tolerates wide ambient temperature swings and electrical noise while giving fast response to changes in intake flow. It’s engineered to match original equipment fit and function so technicians and DIYers can replace a failing unit and recover accurate air metering without complicated modifications.\n\n\u003ch3\u003eHow quickly does the AF10060 respond to airflow changes?\u003c\/h3\u003e\n\u003cp\u003eDelphi designed the AF10060 for fast electrical response so the ECM receives near-instant updates when intake flow shifts. Typical response is very fast—on the order of milliseconds—so fueling adjustments and transient throttle behavior remain accurate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast response time to 90% of flow change for prompt fueling adjustments\u003c\/li\u003e\n  \u003cli\u003eDual heated elements that maintain sensing stability across conditions\u003c\/li\u003e\n  \u003cli\u003eMultiple sensing elements reduce sensitivity to supply voltage fluctuations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this MAF sensor work in harsh temperatures and noisy electrical systems?\u003c\/h3\u003e\n\u003cp\u003eThe AF10060 is built to perform in demanding environments, including low-temperature applications and vehicles with variable electrical noise. Cold sealing and robust element design help preserve measurement accuracy from extreme cold up to high ambient temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-seal capable construction for reliable operation at very low temperatures\u003c\/li\u003e\n  \u003cli\u003eMultiple sensing elements minimize the effect of electrical interference\u003c\/li\u003e\n  \u003cli\u003eDurable materials and engineering tuned for long-term stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this Delphi sensor simplify repair and installation?\u003c\/h3\u003e\n\u003cp\u003eDelphi engineers the AF10060 as an OE-style replacement to reduce installation time and complexity. The shape, connector, and calibration match vehicle-specific requirements whenever possible so you can avoid extra parts or expensive reprogramming in many applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplication-specific design to match OE fit and connector locations\u003c\/li\u003e\n  \u003cli\u003ePre-calibrated sensing elements to limit the need for additional tuning\u003c\/li\u003e\n  \u003cli\u003eEngineered to reduce unnecessary component replacement during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect after replacing a failing MAF?\u003c\/h3\u003e\n\u003cp\u003eReplacing a degraded or faulty MAF with the Delphi AF10060 restores consistent airflow data to the ECM, improving fuel metering, idle quality, and throttle response. Accurate airflow measurement also helps keep emissions systems operating within expected parameters by preventing excessive fueling or lean conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved fuel injection accuracy and throttle response\u003c\/li\u003e\n  \u003cli\u003eSmoother idle and transient engine behavior after replacement\u003c\/li\u003e\n  \u003cli\u003eSupport for emissions control by restoring correct air-fuel balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nThe Delphi AF10060 is aimed at technicians, independent repair shops, and informed vehicle owners seeking an OE-quality MAF sensor replacement. Choose this sensor when you need fast response, temperature resilience, and an application-specific unit that minimizes installation hassle while restoring reliable airflow measurement. Note: warranty terms may vary depending on the seller; review purchase details for coverage information.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the AF10060 a direct OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The AF10060 is engineered to match OE fit, connector, and performance for many applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this MAF work in very cold climates?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The sensor features cold sealing and heated elements designed for low-temperature operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67585425670329,"sku":"B004SH4MJG","price":179.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-af10060-front-view.jpg?v=1790469931"},{"product_id":"delphi-ignition-coil-gn10401-direct-fit-replacement-oe-calibrated-voltage-heat-resistant-winding","title":"Delphi ignition coil GN10401 direct-fit replacement — OE-calibrated voltage, heat-resistant winding","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi GN10401 ignition coil is a direct-fit replacement coil engineered to restore reliable spark delivery, helping engines start quickly and run smoothly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from a century of original-equipment engineering, this Delphi ignition coil is manufactured to meet tight tolerances and withstand demanding operating conditions. It is intended to work as part of the vehicle's ignition system, delivering high-voltage energy to spark plugs to support consistent combustion, predictable idle, and steady throttle response. Delphi supplies installation accessories as needed for a complete replacement, and each unit is produced using stringent quality controls.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the GN10401 improve engine starting and performance?\u003c\/h3\u003e\n\u003cp\u003eThe coil is designed to provide a concentrated, stable high-voltage pulse to the spark plug so combustion occurs consistently at each firing event. That steady spark pattern helps reduce misfires, supports crisp cold starts, and promotes more even power delivery across RPM ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-calibrated voltage output for consistent spark.\u003c\/li\u003e\n  \u003cli\u003eOptimized winding and insulation to resist heat fade.\u003c\/li\u003e\n  \u003cli\u003eIncludes necessary installation hardware for proper fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this ignition coil fit my vehicle and how easy is it to install?\u003c\/h3\u003e\n\u003cp\u003eThe GN10401 is manufactured to match original equipment dimensions and connector configurations so it installs like the factory part in compatible models. Installation is straightforward for anyone familiar with basic engine maintenance, though following a vehicle-specific service manual or professional installation is advised for best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit form and OEM-style electrical connector.\u003c\/li\u003e\n  \u003cli\u003eSupplied with any required mounting accessories.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play replacement for matching part numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and testing standards does Delphi apply to this coil?\u003c\/h3\u003e\n\u003cp\u003eDelphi subjects ignition components to rigorous testing to ensure they meet high durability and performance expectations. That includes thermal cycling and electrical endurance tests intended to simulate long-term use in real-world conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision manufacturing processes to reduce unit-to-unit variation.\u003c\/li\u003e\n  \u003cli\u003eStress testing under extreme temperature and load conditions.\u003c\/li\u003e\n  \u003cli\u003eMaterials selected for electrical stability and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does choosing Delphi affect diagnostics and emissions system compatibility?\u003c\/h3\u003e\n\u003cp\u003eDelphi engineers parts to integrate with modern engine management systems so ignition-related faults are minimized when the correct replacement is used. While Delphi provides support for OE-level diagnostics and coding procedures, warranty terms can vary by seller—check purchase source for coverage details.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to work with standard ignition control strategies.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce ignition-caused misfire codes when installed correctly.\u003c\/li\u003e\n  \u003cli\u003eWarranty terms differ for purchases from third-party marketplaces—verify before buying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi GN10401 is suited for owners and technicians seeking an OE-quality ignition coil replacement that restores reliable spark delivery and long-term durability. It’s appropriate for routine maintenance, resolving ignition-related trouble codes, or when a direct-fit OEM-style coil is required for compatible vehicle applications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Delphi GN10401 a direct replacement for factory coils?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. GN10401 is built to match original dimensions and electrical connectors for direct-fit replacement in compatible vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this coil come with installation accessories?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Delphi includes required mounting hardware and accessories when specified, enabling a complete replacement job.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67585512439993,"sku":"B00L4KUN5W","price":198.13,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10401-front-view.jpg?v=1790472014"},{"product_id":"delphi-fuel-pump-module-assembly-fg1057-direct-fit-oe-replacement-low-amperage-design","title":"Delphi Fuel Pump Module Assembly FG1057 — Direct-Fit OE Replacement, Low-Amperage Design","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi FG1057 Fuel Pump Module Assembly is a direct-fit replacement fuel delivery unit engineered to deliver reliable pumping, accurate fuel-level readings, and long-lasting operation to match original equipment standards.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDelphi's FG1057 is built using the same engineering principles and manufacturing controls used for major OEMs, backed by decades of fuel-system development. The module undergoes extensive validation, including endurance testing through 150,000 miles and compatibility checks with fuels containing up to 20% ethanol, to help ensure dependable performance after installation. Components and electrical design choices aim to reduce amperage draw while providing consistent flow and proper float operation for correct gauge readings.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the FG1057 improve fuel delivery compared to a worn pump?\u003c\/h3\u003e\n\u003cp\u003eReplacing a degraded pump with the FG1057 restores factory-caliber flow rates and pressure stability, improving engine performance and drivability. Delphi designs the assembly to match OE fitment and operation so installation and calibration of fuel-level sensing are straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to Delphi original-equipment standards for consistent flow.\u003c\/li\u003e\n  \u003cli\u003eValidated for specific vehicle applications to ensure correct fit.\u003c\/li\u003e\n  \u003cli\u003eLower electrical draw to reduce stress on vehicle wiring and relays.\u003c\/li\u003e\n  \u003cli\u003eFloat geometry and retention tuned to maintain accurate gauge readings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and setup?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same procedures as the original module, though it's recommended to inspect and clean the tank before fitting to protect the new pump. The FG1057 includes the components needed for fuel delivery and level sensing, and application validation reduces the need for modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for streamlined swap-in replacement.\u003c\/li\u003e\n  \u003cli\u003eCheck tank cleanliness and replace any corroded hardware prior to install.\u003c\/li\u003e\n  \u003cli\u003eConfirm electrical connectors and fuel lines match the vehicle harness and fittings.\u003c\/li\u003e\n  \u003cli\u003eTest fuel pressure and gauge accuracy after installation for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and fuel-compatible is this module?\u003c\/h3\u003e\n\u003cp\u003eDelphi applies long-term durability testing and ethanol compatibility checks so the FG1057 can withstand typical road use and common fuel blends. Materials and internal components are selected to resist wear and maintain performance across many miles of operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEndurance-tested to simulated service up to 150,000 miles.\u003c\/li\u003e\n  \u003cli\u003eValidated with fuels containing up to 20% ethanol.\u003c\/li\u003e\n  \u003cli\u003eOE-derived materials and construction for corrosion and wear resistance.\u003c\/li\u003e\n  \u003cli\u003eElectrical design optimized to limit amperage draw under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi FG1057 Fuel Pump Module Assembly is intended for technicians, DIY mechanics, and fleet maintainers who need an OE-quality replacement for a failing or old fuel pump module. It suits vehicle owners seeking a reliable, application-validated unit with accurate fuel-level sensing and robust electrical performance, especially when replacing worn pumps to restore drivability and fuel system function.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote:\u003c\/em\u003e Products purchased through this site may have warranties provided by the seller identified on your order; review seller warranty terms for coverage details.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the FG1057 a direct replacement for my original module?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the FG1057 is validated to match specific vehicle applications for direct-fit replacement in compatible models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this module handle ethanol-blended fuels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Delphi tests this module with fuels up to 20% ethanol to ensure material and performance compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67585576173753,"sku":"B00EAMBDTQ","price":515.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-fg1057-front-angle-assembly.jpg?v=1790472338"},{"product_id":"delphi-idle-air-control-valve-cv10011-oe-quality-iacv-direct-fit-for-stable-idle","title":"Delphi Idle Air Control Valve CV10011 — OE-Quality IACV, Direct Fit for Stable Idle","description":"\u003cstrong\u003eThe Delphi CV10011 Idle Air Control Valve is a direct OE-quality replacement that regulates engine idle air flow for stable, reliable idling.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned and manufactured to OE standards, the Delphi CV10011 restores proper idle control for compatible gasoline engines. It helps the engine maintain a steady idle under varying loads and accessories by precisely metering the bypass air that bypasses the throttle plate. Built with premium materials and engineered tolerances, this valve aims to match factory fit, function and durability so installation is straightforward and downtime is minimized.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this valve improve idle stability?\u003c\/h3\u003e\n\u003cp\u003eThe CV10011 precisely controls the amount of air entering the intake manifold when the throttle is closed, compensating for changes in engine load, temperature and accessory draw. That smooths out RPM fluctuations, reduces surging, and makes cold starts more consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccurate metering of bypass air for consistent engine speed\u003c\/li\u003e\n  \u003cli\u003eRapid response to electrical and accessory load changes\u003c\/li\u003e\n  \u003cli\u003eDesign and tolerances matched to OE specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my vehicle and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eThe Delphi CV10011 is an OE-style replacement designed for a range of compatible applications—check fitment against your vehicle’s parts catalog or VIN. Because it replicates factory mounting points and connectors, installation is usually straightforward for a trained technician and many experienced DIYers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect physical fit to original mounting and connector layout\u003c\/li\u003e\n  \u003cli\u003eReduced need for modification or extra adapters\u003c\/li\u003e\n  \u003cli\u003eCommon workshop-level installation tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and quality features does this part include?\u003c\/h3\u003e\n\u003cp\u003eDelphi engineers components to meet strict quality standards to avoid premature failure and intermittent faults. The CV10011 uses materials and assembly processes intended to resist common wear factors like heat cycling and vibration, helping preserve idle control performance over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to OE-equivalent specifications for reliability\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand engine bay heat and vibration\u003c\/li\u003e\n  \u003cli\u003eTested for consistent airflow control across operating conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing the idle air control valve affect fuel efficiency and emissions?\u003c\/h3\u003e\n\u003cp\u003eWhile one component does not overhaul fuel economy, a properly functioning idle air control valve contributes to more stable idle behavior and efficient combustion at low loads. That can reduce unnecessary fuel consumption during idle and help the engine run as intended, which supports overall emissions control systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps maintain stable idle for efficient low-load combustion\u003c\/li\u003e\n  \u003cli\u003eMinimizes engine surging that can increase fuel use at idle\u003c\/li\u003e\n  \u003cli\u003eSupports the vehicle’s broader emission-control systems by restoring correct air metering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi CV10011 is aimed at vehicle owners, independent repair shops and fleet maintainers who need an OE-style idle air control valve replacement to restore steady idling and dependable engine response. Choose this part if you require a direct-fit solution engineered to match factory quality and reduce installation complexity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know if the CV10011 is compatible with my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle parts catalog or VIN against Delphi fitment listings and the product application guide to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this valve myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Many experienced DIYers can install it with basic tools, but professional installation is recommended if you're unfamiliar with engine systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67585600127161,"sku":"B000CGHUQ4","price":177.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-cv10011-front-view.jpg?v=1790473768"},{"product_id":"delphi-crankshaft-position-sensor-ss10206-oem-grade-fit-durable-thermal-protection","title":"Delphi Crankshaft Position Sensor SS10206 — OEM-Grade Fit, Durable Thermal Protection","description":"\u003cp\u003e\u003cstrong\u003eDelphi SS10206 is a precision crankshaft position sensor that supplies accurate crank angle and engine speed data to the vehicle’s control module for dependable ignition timing and fuel management.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to Delphi's OEM-derived standards, the SS10206 is engineered for consistent signal output, thermal resilience, and long service life in modern gasoline engines. Delphi leverages decades of fuel and sensor expertise to produce replacement parts that match or exceed original equipment performance, offering digitally optimized outputs and robust protection against under-hood stresses.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SS10206 ensure accurate engine timing?\u003c\/h3\u003e\n\u003cp\u003eThe SS10206 uses a precisely engineered sensing gap and a digitally conditioned output to deliver clear crankshaft position pulses. That stable signal helps the engine control module determine ignition timing and injection events without false readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision sensing gap for consistent pulse generation\u003c\/li\u003e\n  \u003cli\u003eDigitally optimized signal-to-noise ratio\u003c\/li\u003e\n  \u003cli\u003eCompatible electrical output for most OEM control modules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat improves durability compared with older replacement sensors?\u003c\/h3\u003e\n\u003cp\u003eDelphi designs this sensor to withstand broad temperature swings and under-hood contaminants, reducing failure from heat or vibration. Materials and protective features reduce the risk of signal drift over time, extending reliable service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust housing to resist heat and mechanical stress\u003c\/li\u003e\n  \u003cli\u003eSealed construction against moisture and debris ingress\u003c\/li\u003e\n  \u003cli\u003eEngineered for long-term signal stability across operating ranges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sensor work with my vehicle’s engine control systems?\u003c\/h3\u003e\n\u003cp\u003eThe SS10206 is manufactured to meet or exceed original equipment electrical and mechanical specifications, providing compatible communication with most OEM engine control modules. Always verify fitment with your vehicle’s year, make, model and engine code prior to purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-quality electrical characteristics for plug-and-play operation\u003c\/li\u003e\n  \u003cli\u003eEngine-specific fitment listed by application cross-reference\u003c\/li\u003e\n  \u003cli\u003eSimple replacement procedure when matched to correct vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this sensor affect drivability and emissions?\u003c\/h3\u003e\n\u003cp\u003eBy restoring precise crankshaft position feedback, the SS10206 helps the engine control module optimize ignition and fuel injection timing, which supports smoother idle, more predictable throttle response, and stable combustion. Improved timing consistency can contribute to more controlled emissions behavior when the rest of the engine management system is functioning correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps reduce misfires and rough idling caused by faulty timing signals\u003c\/li\u003e\n  \u003cli\u003eSupports consistent fuel delivery and ignition timing adjustments\u003c\/li\u003e\n  \u003cli\u003eCan improve throttle response and overall engine smoothness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi SS10206 is intended for professional technicians and DIY enthusiasts looking for an OE-quality crankshaft position sensor replacement. It's appropriate for owners who need a durable, electrically compatible sensor to restore accurate timing signals—particularly vehicles experiencing erratic idle, poor throttle response, misfires, or diagnostic trouble codes related to crankshaft position. Verify vehicle compatibility before ordering and consult installation guides or a mechanic for diagnostic confirmation and proper fitting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm the SS10206 fits my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle’s year, make, model and engine code against the SS10206 fitment list or contact the seller for cross-reference before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does Delphi offer a warranty for this sensor on this site?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Warranty terms vary; products bought on this site carry the seller’s warranty, not Delphi’s standard limited warranty—review seller warranty details.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67585880129721,"sku":"B000CGG5SI","price":123.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-ss10206-front-view.jpg?v=1790479151"},{"product_id":"delphi-ignition-coil-gn10165-oe-quality-replacement-improved-cold-starts-reduced-misfires","title":"Delphi ignition coil GN10165 — OE-quality replacement, improved cold starts \u0026 reduced misfires","description":"\u003cp\u003e\u003cstrong\u003eDelphi GN10165 Ignition Coil delivers reliable, OE-quality spark energy to help your engine start quickly and run smoothly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ignition coil is built to integrate with modern engine management systems, providing consistent voltage to spark plugs for dependable starts, steady combustion, and stable engine performance. Delphi engineers and tests components to match original-equipment standards, using precision manufacturing and robust materials so the coil performs under demanding conditions. The package includes the parts needed for installation, and the design supports advanced diagnostics and adaptation procedures used in OE service.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Delphi GN10165 improve engine startup and drivability?\u003c\/h3\u003e\n\u003cp\u003eThe GN10165 supplies focused electrical energy to the spark plugs so ignition events are timely and consistent. That steadiness helps reduce misfires during startup and under load, supporting smoother throttle response and stable idling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivers consistent spark voltage to reduce misfires.\u003c\/li\u003e\n  \u003cli\u003eImproves cold starts and transient throttle response.\u003c\/li\u003e\n  \u003cli\u003eMatches OE electrical characteristics to maintain drivability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this ignition coil reliable for everyday use?\u003c\/h3\u003e\n\u003cp\u003eDelphi uses controlled manufacturing processes and quality checks to produce coils that withstand heat, vibration, and repeated electrical cycles. The GN10165 is engineered for a long service life while meeting stringent performance targets expected of original-equipment components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision winding and insulation to resist breakdown.\u003c\/li\u003e\n  \u003cli\u003eDurable housings that tolerate engine bay conditions.\u003c\/li\u003e\n  \u003cli\u003eTested to OE-like standards for consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the GN10165 fit my vehicle and work with diagnostics?\u003c\/h3\u003e\n\u003cp\u003eThe coil is designed for compatibility with specific vehicle applications and integrates with engine control modules that perform adaptation and fault logging. It supports reset\/adaptation procedures and is intended to behave like the factory component so diagnostic routines remain effective.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to match original equipment specifications.\u003c\/li\u003e\n  \u003cli\u003eSupports adaptation and reset functions used by technicians.\u003c\/li\u003e\n  \u003cli\u003eIncludes necessary installation accessories for a full replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know this is a quality replacement part?\u003c\/h3\u003e\n\u003cp\u003eDelphi’s century-long background in OE engineering informs the GN10165’s design and testing protocols. Each coil undergoes performance verification under demanding conditions so it meets tight tolerances and electrical requirements used by vehicle manufacturers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeveloped with OE-level engineering and testing practices.\u003c\/li\u003e\n  \u003cli\u003eManufactured under controlled quality processes for consistency.\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet ignition, emissions, and sensor expectations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi GN10165 is intended for vehicle owners and professional technicians seeking an OE-style ignition coil that restores reliable spark delivery and supports standard diagnostic workflows. It’s a suitable choice for drivers who want long-lasting performance, straightforward installation with included accessories, and parts engineered to factory tolerances. Note: warranty terms vary when purchased through certain marketplaces—check seller warranty information before buying.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Delphi GN10165 a direct replacement for factory coils?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—when matched to the correct application, it’s engineered to meet original-equipment specifications for fit and function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this coil include installation parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, Delphi supplies the necessary accessories for a complete installation with the GN10165.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67586423292089,"sku":"B002X6W15G","price":125.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10165-front.jpg?v=1790483247"},{"product_id":"delphi-ignition-coil-gn10366-direct-fit-replacement-with-oe-level-spark-energy-for-improved-starts-and-idle","title":"Delphi Ignition Coil GN10366 — Direct-Fit Replacement with OE-Level Spark Energy for Improved Starts and Idle","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi GN10366 ignition coil delivers reliable, OE-level spark energy to support consistent starts and steady engine performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Delphi GN10366 is a direct-fit ignition coil engineered to integrate with modern engine management systems. Built using Delphi's century-long OE heritage, this coil is manufactured to precise tolerances and subjected to rigorous testing so it meets demanding road and weather conditions. It includes the connectors and mounting features needed for installation in compatible vehicle applications and is intended to restore correct ignition function when replacing a faulty coil.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the GN10366 affect starting and idle behavior?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failing ignition coil with the GN10366 can improve cold starts, reduce hesitation during throttle input, and help stabilize idle speed. By restoring consistent high-voltage delivery to the spark plug, combustion becomes more repeatable and predictable across cylinders.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores steady spark energy for smoother startups\u003c\/li\u003e\n  \u003cli\u003eReduces misfire-related rough idling and surging\u003c\/li\u003e\n  \u003cli\u003eHelps maintain balanced cylinder firing under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes Delphi’s design dependable for daily driving?\u003c\/h3\u003e\n\u003cp\u003eDelphi applies precision manufacturing and durable materials to keep the GN10366 operating reliably over time. The coil design focuses on efficient voltage transfer and thermal resilience so it withstands temperature swings and engine vibration common in everyday driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to tight tolerances for consistent performance\u003c\/li\u003e\n  \u003cli\u003eEngineered for thermal and mechanical durability\u003c\/li\u003e\n  \u003cli\u003eIncludes required connectors or hardware for a complete replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my vehicle and how easy is it to replace?\u003c\/h3\u003e\n\u003cp\u003eThe GN10366 is a direct-fit replacement for specific applications—check vehicle compatibility before purchasing. Installation is typically straightforward for technicians and experienced DIYers, since Delphi supplies the coil with the necessary features to match OE mounting and electrical connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for compatible models—verify year\/make\/model fitment\u003c\/li\u003e\n  \u003cli\u003eConnectors and mounting points follow OE specifications\u003c\/li\u003e\n  \u003cli\u003eCommonly replaced without modifying wiring or ignition modules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this ignition coil help with fuel efficiency or check-engine lights?\u003c\/h3\u003e\n\u003cp\u003eWhile no part can guarantee fuel-economy gains, restoring correct ignition timing and full spark energy can eliminate misfires that waste fuel. Replacing a damaged coil often resolves ignition-related trouble codes that trigger the check-engine light, though diagnosis should confirm the coil is the root cause.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrects misfire sources to prevent wasted fuel from incomplete combustion\u003c\/li\u003e\n  \u003cli\u003eCan clear ignition-related error codes when the coil is the failing component\u003c\/li\u003e\n  \u003cli\u003eRecommended to pair with proper diagnostics to rule out other causes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi GN10366 is aimed at vehicle owners, independent mechanics, and service shops seeking an OE-level ignition coil replacement that balances durability with straightforward installation. It is suitable for drivers addressing misfires, rough starts, or ignition-related fault codes who want a precisely manufactured, tested part backed by Delphi’s automotive engineering background. Be sure to confirm compatibility with your vehicle’s year, make, model, and engine code before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know GN10366 fits my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle’s year, make, model, and engine code against the GN10366 fitment chart or parts catalog before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this coil myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Experienced DIYers can replace it—verify compatibility, disconnect the battery, and follow vehicle-specific removal and torque procedures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67586522316985,"sku":"B00GIBF7AI","price":133.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10366-front-view.jpg?v=1790485599"},{"product_id":"delphi-ignition-knock-sensor-as10017-oe-calibrated-detonation-sensor-shielded-2-wire-piezoelectric","title":"Delphi ignition knock sensor AS10017 — OE-calibrated detonation sensor, shielded 2-wire, piezoelectric","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi AS10017 is an OE-calibrated ignition knock (detonation) sensor that senses combustion knock and delivers clean, reliable signals to your engine control module for optimized ignition timing and engine protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Delphi knock sensor is built on a century of OE engineering and testing to match factory-level performance and durability. It uses a piezoelectric sensing element that generates its own signal, a ground-isolated two-wire shielded harness to resist electromagnetic interference, and a wide frequency calibration so a single design can reliably detect knock across multiple engine applications and fuel types.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the AS10017 detect and report engine knock?\u003c\/h3\u003e\n\u003cp\u003eThe sensor converts vibration from pre-ignition or detonation into an electrical signal the engine control module interprets to adjust ignition timing. Its piezoelectric element produces a self-generated output, while the shielded two-wire harness and ground-isolated construction help preserve signal integrity under noisy conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePiezoelectric core provides self-powered knock signal generation.\u003c\/li\u003e\n  \u003cli\u003eGround-isolated design minimizes electrical noise and false readings.\u003c\/li\u003e\n  \u003cli\u003eShielded two-wire connector ensures consistent signal transmission.\u003c\/li\u003e\n  \u003cli\u003eCalibrated across a broad frequency range for accurate detection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sensor work across different engines and fuels?\u003c\/h3\u003e\n\u003cp\u003eDelphi engineered the AS10017 with a flat frequency response so the same sensor design performs reliably on multiple gasoline engine applications. It’s calibrated to detect knock events beyond the primary operating range, which helps maintain consistent engine management when fuel composition or operating conditions vary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-style calibration supports varied engine platforms.\u003c\/li\u003e\n  \u003cli\u003eWideband frequency response captures different knock characteristics.\u003c\/li\u003e\n  \u003cli\u003eSuitable for engines subject to varying loads and fuel qualities.\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet or exceed OE performance requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and compatibility details should I know?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically involves mounting the sensor to the engine block where it can best sense combustion-induced vibration and connecting the shielded two-wire harness to the vehicle harness. Delphi provides OE-level diagnostics and training resources, but confirm fitment for your specific year, make, and model before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounts directly to the engine block for optimal vibration sensing.\u003c\/li\u003e\n  \u003cli\u003e2-wire shielded connector matches OE harness styles on many applications.\u003c\/li\u003e\n  \u003cli\u003eNo external power required; sensor is self-generating.\u003c\/li\u003e\n  \u003cli\u003eAlways verify part compatibility with vehicle application data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the AS10017 help with emissions and engine management?\u003c\/h3\u003e\n\u003cp\u003eBy delivering precise knock information to the control module, the sensor helps the ECU adjust ignition timing to promote efficient combustion and protect components from damaging detonation. While not an emissions device itself, its accurate feedback supports engine control strategies that can maintain proper emissions performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnables ignition timing adjustments to reduce knock risk.\u003c\/li\u003e\n  \u003cli\u003eSupports combustion stability across driving conditions.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain engine operation that aligns with emissions control systems.\u003c\/li\u003e\n  \u003cli\u003eContributes to consistent performance with varying fuels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers, mechanics, and DIY enthusiasts looking for a durable, OE-quality knock sensor replacement that restores factory-style knock detection and signal integrity. If you need a robust, calibrated sensor for accurate knock sensing across multiple engine conditions—backed by Delphi’s OE engineering—this part is designed for those seeking dependable performance and straightforward fitment. Note: products purchased through Amazon may be subject to seller-specific warranties; review warranty details with the seller at purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the AS10017 need an external power source?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The AS10017 uses a piezoelectric element that generates its own signal and requires no external power.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one sensor design cover multiple engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its flat frequency response and OE calibration let the same design be used across many gasoline engine applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67586533589177,"sku":"B000CGHTC4","price":116.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-as10017-front-view.jpg?v=1790486142"},{"product_id":"delphi-ignition-coil-gn10494-direct-fit-replacement-oe-quality-spark-for-reliable-starts-and-smooth-idle","title":"Delphi Ignition Coil GN10494 — Direct-Fit Replacement, OE-Quality Spark for Reliable Starts and Smooth Idle","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi GN10494 ignition coil delivers OE-quality spark energy to help ensure reliable starts, stable engine running, and consistent ignition performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from a century of automotive engineering, the Delphi GN10494 is a direct-fit ignition coil designed to integrate with modern engine management systems. It’s manufactured to tight tolerances and tested under demanding conditions so it can reliably deliver the voltage and timing your spark plugs need for efficient combustion. Delphi includes the necessary installation accessories for a complete replacement, and the component is engineered to match original equipment specifications for a seamless swap.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Delphi GN10494 improve starting and idle stability?\u003c\/h3\u003e\n\u003cp\u003eThis coil is shaped to provide consistent high-voltage delivery to the spark plug, which supports quicker engine starts and steadier idling. Improved spark consistency reduces misfires and helps maintain smooth operation across varied loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to match original output characteristics for reliable ignition.\u003c\/li\u003e\n  \u003cli\u003ePrecision winding and insulation to reduce energy loss.\u003c\/li\u003e\n  \u003cli\u003eOptimized for consistent spark timing under different temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this coil a dependable replacement for OEM parts?\u003c\/h3\u003e\n\u003cp\u003eDelphi manufactures the GN10494 to meet or exceed OE manufacturing standards, using controlled production and quality checks to ensure repeatable performance. The coil’s materials and assembly processes are selected to withstand typical engine bay stresses so it remains serviceable over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision manufacturing for consistent fit and function.\u003c\/li\u003e\n  \u003cli\u003eDurable materials chosen for thermal and electrical resilience.\u003c\/li\u003e\n  \u003cli\u003eShips with required accessories for a complete installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installing the Delphi GN10494 affect fuel efficiency or emissions?\u003c\/h3\u003e\n\u003cp\u003eBy restoring reliable spark delivery, the GN10494 helps the engine maintain more complete combustion, which supports consistent fuel use and cleaner running compared with a misfiring ignition system. It’s designed to work within the vehicle’s engine management strategy without altering calibrated systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePromotes more complete combustion by reducing misfires.\u003c\/li\u003e\n  \u003cli\u003eDesigned to operate within stock ignition timing and control logic.\u003c\/li\u003e\n  \u003cli\u003eNo vehicle reprogramming required for normal replacement procedures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eThe GN10494 is a direct-fit replacement intended for straightforward swap-in installation on compatible vehicles. Most installations require basic hand tools and following vehicle-specific service steps; Delphi includes necessary mounting hardware and connectors when applicable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design minimizes modification or adaptation time.\u003c\/li\u003e\n  \u003cli\u003eIncludes any required accessories for a complete job where specified.\u003c\/li\u003e\n  \u003cli\u003eTypical installation needs: socket set, torque wrench, and safety precautions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi GN10494 ignition coil is aimed at DIY mechanics, professional technicians, and vehicle owners looking for a long-lasting, OE-level replacement coil. It is suitable for anyone needing to correct ignition-related drivability issues such as rough idle, hard starts, or suspected coil failure while keeping installation simple and retaining factory-fit performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Delphi GN10494 a direct replacement for OEM coils?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s manufactured to match OE specifications for fit and function in compatible vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the coil require reprogramming after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — normal replacement does not require ECU reprogramming; follow vehicle-specific installation steps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67586566783161,"sku":"B00JRWDRY8","price":110.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10494-front-view.jpg?v=1790487339"},{"product_id":"delphi-ignition-control-module-ds10059-direct-fit-oem-style-replacement-with-over-voltage-esd-protection","title":"Delphi Ignition Control Module DS10059 — Direct-Fit OEM-Style Replacement with Over-Voltage \u0026 ESD Protection","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi DS10059 Ignition Control Module is a direct-fit replacement that controls spark timing electronically to restore reliable ignition performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle is experiencing misfires, rough idle, or inconsistent starting and the diagnosis points to the ignition control module, the Delphi DS10059 offers an OEM-style solution. Built with a layout and manufacturing process that emphasizes heat transfer and component durability, this module integrates protection features like short-circuit, over-voltage and electrostatic discharge safeguards to help the unit tolerate real-world electrical stresses.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DS10059 improve ignition reliability?\u003c\/h3\u003e\n\u003cp\u003eThe DS10059 replaces aging or failed modules with a unit designed to handle the thermal and electrical demands of modern ignition systems. Its internal current limiting and precise voltage clamping help prevent erratic behavior under load, while ESD and over-voltage protection reduce the risk of sudden electronic failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-style layout for consistent thermal management\u003c\/li\u003e\n  \u003cli\u003eInternal current limit to avoid overload conditions\u003c\/li\u003e\n  \u003cli\u003eVoltage clamping and ESD protection for stable operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key features to check before installation?\u003c\/h3\u003e\n\u003cp\u003eVerify that the DS10059 matches your vehicle’s original part number, mounting points and electrical connector. Confirming fitment avoids adaptation work and preserves factory wiring and brackets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare the part number to the original module\u003c\/li\u003e\n  \u003cli\u003eInspect mounting hole pattern and connector style\u003c\/li\u003e\n  \u003cli\u003eCheck thermal pad or heat-sink contact for proper mating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this module protect against electrical faults?\u003c\/h3\u003e\n\u003cp\u003eDelphi engineered the DS10059 with several protection layers that reduce vulnerability to spikes and shorts common in automotive electrical systems. These protections help the module survive transient events that would otherwise damage sensitive ignition electronics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShort-circuit protection to limit damaging currents\u003c\/li\u003e\n  \u003cli\u003eOver-voltage circuitry to absorb excess input voltage\u003c\/li\u003e\n  \u003cli\u003eElectrostatic Discharge (ESD) protection for handling and operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits should drivers expect after replacement?\u003c\/h3\u003e\n\u003cp\u003eInstalling a properly matched DS10059 can restore consistent spark timing and eliminate intermittent misfires tied to a failing control module. While it won’t change engine design, it helps return ignition behavior to factory intent, improving drivability and start-up reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother idle and fewer ignition-related misfires\u003c\/li\u003e\n  \u003cli\u003eMore consistent starting in varied temperatures\u003c\/li\u003e\n  \u003cli\u003eReduced electronic-related drivability issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi DS10059 is aimed at technicians and vehicle owners seeking a dependable, OEM-style ignition control module replacement. It suits anyone repairing ignition faults, completing routine electrical diagnostics, or restoring vehicles where original-module failure causes drivability problems. Ensure correct vehicle fitment before purchase and follow manufacturer installation guidance or professional service for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the DS10059 fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match the DS10059 part number and connector style to your original module; confirm vehicle compatibility listing before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this module include electrical protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it has short-circuit, over-voltage and ESD protection plus internal current limiting and voltage clamping.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67586636120249,"sku":"B0054TQX6W","price":118.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-ds10059-front-view.jpg?v=1790488865"},{"product_id":"delphi-ignition-coil-gn10114-oe-quality-replacement-with-installation-hardware","title":"Delphi Ignition Coil GN10114 — OE-Quality Replacement with Installation Hardware","description":"\u003cp\u003e\u003cstrong\u003eDelphi GN10114 Ignition Coil delivers OE-quality spark delivery to support reliable starts, consistent engine performance, and long-lasting operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle relies on dependable ignition to start quickly and run smoothly, the Delphi GN10114 is built to match original-equipment expectations. Designed and manufactured with advanced process controls, this coil integrates with modern engine management systems to deliver precise voltage to spark plugs. Delphi tests components under harsh conditions and includes the hardware needed for installation, providing a straightforward replacement for compatible vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the GN10114 improve starting and throttle response?\u003c\/h3\u003e\n\u003cp\u003eThe ignition coil converts battery voltage into the high-voltage pulses required by spark plugs, supporting quick engine starts and stable combustion. A coil that maintains consistent output helps reduce misfires and keeps throttle response predictable during acceleration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides steady high-voltage pulses for reliable ignition.\u003c\/li\u003e\n  \u003cli\u003eEngineered to match OE electrical characteristics for smoother starts.\u003c\/li\u003e\n  \u003cli\u003eReduces risk of spark instability that can cause hesitation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes Delphi’s design and manufacturing dependable?\u003c\/h3\u003e\n\u003cp\u003eDelphi applies a century of OE engineering and rigorous testing to each ignition coil, focusing on component durability and repeatable performance. Quality-control measures and modern assembly processes aim to produce coils with consistent electrical behavior and long service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision manufacturing to minimize variation between units.\u003c\/li\u003e\n  \u003cli\u003eMaterials chosen for thermal and electrical stability under load.\u003c\/li\u003e\n  \u003cli\u003eTested through extreme-condition cycles to verify durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this coil fit my vehicle and include installation parts?\u003c\/h3\u003e\n\u003cp\u003eThe GN10114 is produced to meet vehicle-specific fit and electrical requirements for compatible applications and ships with the necessary accessories for installation when applicable. Always verify fitment against your vehicle year, make, and engine before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes installation accessories when specified for a complete job.\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet OE connection points and mounting geometry.\u003c\/li\u003e\n  \u003cli\u003eCheck compatibility charts or VIN-specific guides for exact fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there warranty or purchase considerations I should know?\u003c\/h3\u003e\n\u003cp\u003eDelphi components carry the brand's expectations for reliability, but warranty terms can vary by retailer. Products bought through certain marketplaces may have different warranty coverage, so review seller-provided warranty details before completing your order.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelphi’s standard limited warranty may not apply to items purchased from some third-party sellers.\u003c\/li\u003e\n  \u003cli\u003eSeller-identified warranty information appears on order shipment details.\u003c\/li\u003e\n  \u003cli\u003eContact the seller directly for claims and warranty questions if applicable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Delphi GN10114 is intended for drivers and technicians seeking a high-quality, OE-level ignition coil replacement for compatible vehicles. It's a suitable choice for routine maintenance, restoring ignition reliability after coil failure, or as part of an engine tune-up where consistent spark energy is required. If you prioritize factory-matched electrical performance and robust manufacturing, this coil is designed to meet those expectations while supplying the accessories needed to finish the job cleanly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the GN10114 fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check vehicle compatibility charts or VIN-specific fitment guides; verify year, make, and engine before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this product include installation hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Where specified, Delphi includes necessary accessories for a complete installation; confirm items listed in the product details.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67586745761977,"sku":"B000CGM5T6","price":120.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10114-front-view.jpg?v=1790492177"},{"product_id":"delphi-ignition-coil-gn10119-direct-fit-oe-level-spark-thermal-durable-replacement","title":"Delphi Ignition Coil GN10119 — Direct-Fit OE-Level Spark, Thermal-Durable Replacement","description":"\u003cp\u003e\u003cstrong\u003eDelphi GN10119 Ignition Coil delivers OE-level spark energy and reliable starting by converting battery voltage into the precise high-voltage pulse your spark plugs need.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt with Delphi’s century of OE engineering, the GN10119 ignition coil is a direct-fit replacement designed to work as part of the vehicle’s engine management system. It’s engineered and tested for consistent voltage delivery, thermal durability, and long service life so your engine gets stable ignition timing and dependable starts under varied driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the GN10119 improve engine starting and performance?\u003c\/h3\u003e\n\u003cp\u003eThe coil supplies concentrated high-voltage pulses to the spark plug, which supports reliable ignition and quicker starts. Proper coil function reduces misfires and helps the ignition system operate as intended by the vehicle manufacturer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivers consistent spark energy for smoother combustion cycles\u003c\/li\u003e\n  \u003cli\u003eHelps minimize engine misfires caused by weak spark output\u003c\/li\u003e\n  \u003cli\u003eDesigned to match OE electrical characteristics for direct-fit replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this ignition coil fit my vehicle and install like the original?\u003c\/h3\u003e\n\u003cp\u003eDelphi designs the GN10119 as an OE-style direct replacement that follows the original part’s dimensions and electrical specs. It includes necessary accessories when applicable to streamline installation and maintain factory connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision manufacturing for correct fit and plug-and-play compatibility\u003c\/li\u003e\n  \u003cli\u003eIncludes appropriate mounting and electrical interface where required\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet OE tolerances to preserve system functionality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes Delphi’s ignition coils dependable under real-world conditions?\u003c\/h3\u003e\n\u003cp\u003eDelphi subjects components to rigorous testing cycles and uses quality control processes developed from decades of OE work. Robust materials and optimized coil windings help the GN10119 resist heat and vibration that commonly degrade ignition parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to withstand thermal and mechanical stress in the engine bay\u003c\/li\u003e\n  \u003cli\u003eConsistent manufacturing controls for repeatable performance\u003c\/li\u003e\n  \u003cli\u003eDesign focuses on efficient voltage delivery and long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there warranty or purchasing considerations I should know?\u003c\/h3\u003e\n\u003cp\u003eDelphi’s parts are backed by the brand’s OE heritage, but warranty terms can vary by retailer. Products purchased through third-party marketplaces may carry seller-provided warranties instead of the manufacturer’s standard limited warranty.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck the seller’s warranty details when buying from marketplaces\u003c\/li\u003e\n  \u003cli\u003eKeep order and seller information for any warranty claims\u003c\/li\u003e\n  \u003cli\u003eDelphi documentation and part numbers help confirm compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi GN10119 Ignition Coil is intended for vehicle owners, DIY mechanics, and professional technicians seeking a direct-fit, OE-style replacement coil that supports consistent ignition performance. It’s a suitable choice if you need a durable, precision-manufactured coil to address misfires, improve start reliability, or restore correct ignition system operation while keeping factory electrical characteristics intact.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know GN10119 is compatible with my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match the GN10119 part number with your vehicle’s OEM part list or use Delphi’s application guide to confirm fitment before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this coil myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if you’re comfortable with basic engine bay work. Follow vehicle-specific instructions and disconnect the battery before replacing the coil.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67586856681657,"sku":"B000CGM8D4","price":129.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10119-front-view.jpg?v=1790494469"},{"product_id":"delphi-ignition-coil-gn10235-direct-fit-oe-quality-coil-for-reliable-starts-smooth-performance","title":"Delphi Ignition Coil GN10235 — Direct-Fit OE-Quality Coil for Reliable Starts \u0026 Smooth Performance","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi GN10235 ignition coil delivers OE-quality spark delivery designed to restore reliable starts, steady engine performance, and responsive combustion.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from a century of OE engineering, the Delphi GN10235 is a direct-fit ignition coil engineered for modern engine management systems. It supplies concentrated electrical energy to spark plugs, helping vehicles start quickly and run smoothly under varied driving conditions. Delphi subjects each coil to stringent testing and precision manufacturing practices so the part meets high durability and performance standards; the kit arrives with the necessary accessories for a full replacement when required.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the GN10235 improve engine starting and driveability?\u003c\/h3\u003e\n\u003cp\u003eThe GN10235 provides consistent high-voltage output to spark plugs, which helps ensure reliable ignition events and steadier idle and throttle response. Because it’s built to OE tolerances, it integrates with engine controls to maintain predictable performance across temperature and load changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConsistent spark energy reduces misfires and rough idles.\u003c\/li\u003e\n  \u003cli\u003eDesigned to match OE electrical characteristics for correct timing and firing.\u003c\/li\u003e\n  \u003cli\u003eDurable materials minimize degradation from heat and vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this ignition coil fit my vehicle and how straightforward is replacement?\u003c\/h3\u003e\n\u003cp\u003eThe GN10235 is manufactured as a direct-fit replacement for compatible applications and includes the parts needed to complete the job. Installation typically follows the vehicle maker’s service procedure and can be completed with common hand tools; however, consult a repair manual for model-specific steps and torque specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for select vehicle platforms to simplify installation.\u003c\/li\u003e\n  \u003cli\u003eShips with required mounting accessories where applicable.\u003c\/li\u003e\n  \u003cli\u003eWorks with existing engine harness and spark plug assemblies when matched to the correct application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat engineering and quality controls back the Delphi ignition coil?\u003c\/h3\u003e\n\u003cp\u003eDelphi applies advanced manufacturing controls and OE-derived engineering to each coil to help ensure consistent performance and long service life. Components undergo endurance and environmental testing to verify they operate reliably under typical engine bay stresses like heat, vibration, and moisture.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision winding and insulation for stable voltage delivery.\u003c\/li\u003e\n  \u003cli\u003eMaterials chosen to resist thermal breakdown and electrical wear.\u003c\/li\u003e\n  \u003cli\u003eTested to meet or exceed common OE performance benchmarks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there service, warranty, or diagnostic considerations I should know?\u003c\/h3\u003e\n\u003cp\u003eDelphi parts support common OE-level diagnostics and adaptations, but warranty terms vary by purchase channel. If your vehicle requires electronic reset procedures (throttle actuator, EGR coding, or ignition adaptation), follow the vehicle maker’s recommended diagnostic steps after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMay require diagnostic reset or adaptation on some engine control systems.\u003c\/li\u003e\n  \u003cli\u003eWarranty coverage depends on seller and point of purchase—verify before buying.\u003c\/li\u003e\n  \u003cli\u003eDelphi provides technical resources and OE training to professional installers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Delphi GN10235 ignition coil is aimed at technicians, DIY enthusiasts, and fleet managers who need a reliable, OE-quality replacement that restores ignition performance without complex modification. It’s particularly suited for vehicles that require a direct-fit coil that meets factory electrical characteristics and for anyone who values parts built to high manufacturing and testing standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Delphi GN10235 a direct replacement part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — GN10235 is designed as a direct-fit ignition coil for compatible vehicle applications; confirm compatibility with your year and engine code.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need special tools or programming after installing this coil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installations use standard hand tools; some vehicles may need a diagnostic reset or adaptation via scan tool.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67587317399737,"sku":"B0082A35XO","price":100.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10235-front-view.jpg?v=1790505747"},{"product_id":"delphi-ignition-coil-gn10639-direct-fit-replacement-oe-level-reliability-and-easy-install","title":"Delphi Ignition Coil GN10639 — Direct-Fit Replacement, OE-Level Reliability and Easy Install","description":"\u003cp\u003e\u003cstrong\u003eDelphi GN10639 is a direct-fit ignition coil built to restore reliable spark delivery, support quick engine starts, and maintain consistent combustion performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned and manufactured to align with original-equipment standards, the Delphi GN10639 ignition coil is an exacting replacement part intended for vehicles that require dependable ignition energy and long-lasting operation. Delphi applies a century of OE engineering experience and rigorous testing under extreme conditions to each component, and this coil ships with the accessories needed for a straightforward installation. The unit is engineered to help the ignition system deliver consistent voltage to spark plugs, helping the engine run smoothly across everyday driving scenarios.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coil improve start-up and idle behavior?\u003c\/h3\u003e\n\u003cp\u003eThe GN10639 supplies focused high-voltage output that supports dependable spark generation during engine start and steady idle. By maintaining consistent spark timing and energy, it can reduce misfires that cause rough idling or extended cranking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit connector and mounting points for correct alignment.\u003c\/li\u003e\n  \u003cli\u003eOptimized windings for stable high-voltage delivery.\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist heat and vibration common in engine compartments.\u003c\/li\u003e\n  \u003cli\u003eIncludes installation accessories to replace the coil cleanly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this Delphi coil match original equipment specifications?\u003c\/h3\u003e\n\u003cp\u003eThe GN10639 is engineered to meet OE-level performance and manufacturing tolerances. Delphi’s production and quality controls aim to match the form, fit, and function needed for compatible applications, so the coil integrates with factory ignition systems without extensive modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision dimensions for direct replacement.\u003c\/li\u003e\n  \u003cli\u003eElectrical characteristics tuned for compatible engine management systems.\u003c\/li\u003e\n  \u003cli\u003eMaterials selected for long service life under typical conditions.\u003c\/li\u003e\n  \u003cli\u003eTested across temperature and vibration ranges for reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and quality features to expect?\u003c\/h3\u003e\n\u003cp\u003eDelphi builds this coil with attention to manufacturing consistency and component resilience. Advanced engineering processes reduce the risk of premature failure from thermal stress or mechanical wear, helping the ignition circuit remain dependable over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust housing to protect internal windings and insulation.\u003c\/li\u003e\n  \u003cli\u003eHigh-quality electrical insulation to prevent leakage and arcing.\u003c\/li\u003e\n  \u003cli\u003eResistance to common engine-bay contaminants and moisture.\u003c\/li\u003e\n  \u003cli\u003eQuality control checks to verify performance before shipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and vehicle compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe GN10639 is supplied with the necessary hardware to facilitate a clean swap in compatible vehicles. While many installations are straightforward for experienced technicians or knowledgeable DIYers, consult your vehicle manual for torque specs and any required ECU reset or adaptation procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupplied accessories for a complete replacement job.\u003c\/li\u003e\n  \u003cli\u003eDirect electrical connector to match factory wiring harnesses.\u003c\/li\u003e\n  \u003cli\u003eFits mounting points intended for the OEM coil location.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific adaptation\/reset steps if required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi GN10639 ignition coil is aimed at owners and mechanics who need a reliable, OE-aligned replacement for ignition system maintenance or repair. It suits drivers wanting consistent engine performance, technicians seeking a direct-fit component for routine service, and vehicle restorers who prioritize quality and longevity in ignition parts. If your application specifies GN10639 or its compatible part numbers, this coil provides an engineered replacement backed by Delphi’s decades of OE experience.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the GN10639 a direct replacement for OEM coils?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—Delphi GN10639 is designed as a direct-fit coil matching OEM form, fit, and electrical characteristics for compatible vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this purchase include a warranty from Delphi?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If purchased through Amazon, Delphi’s standard limited warranty does not apply; warranty responsibility lies with the seller listed on your order.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67587336896697,"sku":"B07BF6WQLD","price":100.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10639-front-view.jpg?v=1790506438"},{"product_id":"delphi-camshaft-position-sensor-ss11368-digital-output-oe-quality-durability","title":"Delphi Camshaft Position Sensor SS11368 — Digital Output, OE-Quality Durability","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi SS11368 is a camshaft position sensor engineered to provide accurate, durable camshaft position signals for compatible engines, supporting reliable ignition timing and fuel injection control.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDelphi designs this camshaft position sensor to meet OE-quality standards used by major vehicle manufacturers. Built and tested in ISO-certified facilities, the SS11368 uses a digital output to deliver a clean signal that engine control units (ECUs) can rely on across varied driving conditions. Its construction emphasizes thermal stability and resistance to typical engine-bay stresses so the sensor can maintain consistent performance over long service intervals.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SS11368 help maintain correct engine timing?\u003c\/h3\u003e\n\n\u003cp\u003eThe SS11368 outputs precise camshaft position data to the vehicle’s ECU, which the computer uses to synchronize spark and fuel delivery events. A clear, high signal-to-noise digital output helps reduce misreads that could affect timing precision. Consistent timing input supports smoother idling, predictable throttle response, and efficient combustion under normal operating conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDigital output design for a stable signal\u003c\/li\u003e\n  \u003cli\u003eHigh signal-to-noise ratio to reduce ECU misinterpretation\u003c\/li\u003e\n  \u003cli\u003eCompatible fit and electrical characteristics for intended applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this sensor durable for long-term use?\u003c\/h3\u003e\n\n\u003cp\u003eDelphi manufactures the SS11368 using validated components and assembly processes in an ISO-certified facility, which promotes uniform quality from unit to unit. The sensor housing and internal electronics are designed to tolerate engine-bay temperature cycles and vibration typical of everyday driving. These protections help preserve sensor accuracy and reduce the likelihood of premature failure.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThermally robust materials resist heat-related degradation\u003c\/li\u003e\n  \u003cli\u003eMechanical design withstands vibration and engine movement\u003c\/li\u003e\n  \u003cli\u003eManufactured with Delphi-validated components and processes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the SS11368 fit my vehicle and how reliable is the signal?\u003c\/h3\u003e\n\n\u003cp\u003eFit and electrical compatibility depend on the specific vehicle make, model and engine application; always verify the SS11368 against your vehicle’s OEM part number or fitment guide before purchase. When matched to the correct application, the sensor’s digital output provides a clean, reliable waveform that assists the ECU in making accurate timing and injection decisions. This steadiness in the sensor signal helps maintain consistent engine behavior across driving situations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirm compatibility using OEM cross-reference or fitment tool\u003c\/li\u003e\n  \u003cli\u003eDigital sensing minimizes electrical noise for accurate readings\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet expected electrical and mechanical specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I approach installation and service life expectations?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation should follow vehicle-specific procedures, including secure connector engagement and correct sensor positioning near the camshaft target. Because Delphi tests parts extensively, the SS11368 is intended for long service life, though environmental exposure and vehicle operating conditions influence longevity. If you encounter fault codes related to camshaft position or inconsistent engine behavior, inspect the sensor and wiring before replacing other components.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFollow OEM torque and removal\/installation steps for OEM-style fitment\u003c\/li\u003e\n  \u003cli\u003eInspect wiring harness and connectors for corrosion or damage\u003c\/li\u003e\n  \u003cli\u003eReplace if persistent camshaft position error codes remain after troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi SS11368 is suited for vehicle owners, professional technicians, and independent repair shops seeking an OE-quality camshaft position sensor replacement. It’s aimed at customers who need a robust, tested part that meets strict manufacturing standards and who will verify fitment for their specific make and model prior to installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the SS11368 replace OEM camshaft sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Often yes—confirm compatibility by cross-referencing your vehicle’s OEM part number or fitment chart before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What symptoms indicate the sensor needs replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Look for camshaft position fault codes, rough idle, stalling, or inconsistent engine timing after basic checks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67587450273977,"sku":"B079Y2BNXR","price":87.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-ss11368-front-view.jpg?v=1790508593"},{"product_id":"delphi-ignition-coil-gn10298-direct-replacement-coil-oe-fit-for-reliable-starts-and-reduced-misfires","title":"Delphi ignition coil GN10298 — direct-replacement coil, OE-fit for reliable starts and reduced misfires","description":"\u003cp\u003e\u003cstrong\u003eDelphi GN10298 is a direct-replacement ignition coil built to restore reliable spark delivery, smoother starts, and consistent engine performance to compatible vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned and manufactured with more than a century of OE experience, the Delphi GN10298 ignition coil is intended to work as part of the vehicle’s engine management system to deliver the voltage pulses that fire spark plugs. Delphi engineers test these coils under demanding conditions and supply necessary fitment accessories for a complete swap—aiming to match original equipment characteristics for dependable operation and long life.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this ignition coil affect starting and idle behavior?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or failing coil with the Delphi GN10298 can improve ignition consistency, which often results in quicker starts and a steadier idle. Because the coil is engineered for precise voltage delivery, it reduces misfires that cause rough idling and uneven throttle response.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores consistent high-voltage pulses to spark plugs\u003c\/li\u003e\n  \u003cli\u003eReduces engine misfires and rough idle events\u003c\/li\u003e\n  \u003cli\u003eSupports stable cold and hot starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes Delphi’s design reliable compared with aftermarket alternatives?\u003c\/h3\u003e\n\u003cp\u003eDelphi uses precision manufacturing and quality control to replicate OE-level specifications, which helps ensure a proper electrical match and mechanical fit. The GN10298 undergoes durability testing to withstand temperature swings and vibration typical of engine compartments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to OE tolerances for fit and function\u003c\/li\u003e\n  \u003cli\u003eBuilt to resist heat, vibration, and electrical stress\u003c\/li\u003e\n  \u003cli\u003eIncludes necessary installation accessories when required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward and what should I check during replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for a competent DIYer or professional technician; it follows standard coil-replacement steps—disconnect battery, remove old coil, install new coil, and reconnect. While installing, inspect spark plug condition, wiring harness connectors, and mounting hardware to ensure optimal operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify correct coil orientation and secure mounting\u003c\/li\u003e\n  \u003cli\u003eInspect boots and plugs for wear or carbon tracking\u003c\/li\u003e\n  \u003cli\u003eConfirm connector pins are clean and fully seated\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this coil help prevent check-engine lights or diagnostic trouble codes?\u003c\/h3\u003e\n\u003cp\u003eReplacing a faulty ignition coil like the GN10298 can eliminate misfire-related fault codes and the associated check-engine light if the coil was the root cause. However, codes triggered by unrelated systems require the appropriate repairs and clearing via diagnostics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAddresses ignition-related misfire codes when coil is faulty\u003c\/li\u003e\n  \u003cli\u003eWorks with vehicle diagnostics to restore normal firing patterns\u003c\/li\u003e\n  \u003cli\u003eNot a remedy for codes from fuel, sensor, or mechanical faults\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi GN10298 ignition coil is intended for vehicle owners, mechanics, and fleet technicians who need an OE-style replacement for a failing coil. It’s suited for anyone seeking a precision-made component to restore ignition reliability, reduce misfires, and maintain efficient engine operation. Note that warranty terms may vary by seller and purchases through certain marketplaces may carry seller-provided warranties rather than Delphi’s standard limited warranty.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures at a glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-level performance for consistent spark energy and smooth operation\u003c\/li\u003e\n  \u003cli\u003eEngineered for dependable starting and long service life\u003c\/li\u003e\n  \u003cli\u003ePrecision manufacturing to meet modern ignition system demands\u003c\/li\u003e\n  \u003cli\u003eOptimized coil design for efficient voltage delivery and reduced ignition issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBefore ordering, confirm vehicle compatibility using your VIN or the vehicle-specific fitment guide to ensure the GN10298 matches your application.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Delphi GN10298 fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle compatibility with VIN or fitment guide; confirm connector and mounting match before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will replacing the coil clear a misfire code?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If the coil caused the misfire, replacement often clears the code after driving cycles or a diagnostic reset.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67587487662265,"sku":"B009EK4JPO","price":94.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10298-front-view.jpg?v=1790509996"},{"product_id":"delphi-fuel-injector-installation-kit-7135-276-delphi-style-o-rings-pintle-seals-complete-hardware-kit","title":"Delphi Fuel Injector Installation Kit 7135-276 — Delphi-style O-rings \u0026 pintle seals, complete hardware kit","description":"\u003cp\u003e\u003cstrong\u003eDelphi 7135-276 is a complete fuel injector installation kit that provides the seals and hardware needed to install Delphi-style fuel injectors with an OEM-quality fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis installation kit includes the precise seals, O-rings and mounting components packaged to the measurements and weight specifications suitable for replacement and repair jobs. Designed and manufactured in the United States, the kit is intended to restore proper sealing and help prevent leaks at the injector pintle and rail connection. It fits applications that require Delphi-compatible injector service parts and is supplied in a compact package for easy storage and handling.\u003c\/p\u003e\n\n\u003ch3\u003eWhat components are included in the Delphi 7135-276 kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the common sealing parts and small hardware you need when replacing or servicing fuel injectors. Each piece is sized to match Delphi-style injectors so you can replace worn seals without sourcing individual parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInjector O-rings for fuel rail and injector body connections\u003c\/li\u003e\n  \u003cli\u003ePintle seals and insulators to prevent fuel seepage\u003c\/li\u003e\n  \u003cli\u003eSmall mounting hardware as required for secure fitting\u003c\/li\u003e\n  \u003cli\u003ePackaged in a protective box with product labeling and part number\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit help during an injector replacement?\u003c\/h3\u003e\n\u003cp\u003eUsing the correct seals and hardware reduces the risk of leaks, misfires, and fuel odor after service. The kit supplies matched parts so installation is faster and you avoid trial-and-error with different sizes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSaves time by providing all common replacement seals in one package\u003c\/li\u003e\n  \u003cli\u003eHelps restore proper sealing at rail and injector interfaces\u003c\/li\u003e\n  \u003cli\u003eReduces chance of post-service fuel leaks or pressure loss\u003c\/li\u003e\n  \u003cli\u003eEliminates the need to order multiple separate parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and technicians will benefit from this part?\u003c\/h3\u003e\n\u003cp\u003eThis kit fits technicians and DIYers working with Delphi-compatible injectors across a variety of gasoline engines. It's ideal for shops that routinely service fuel systems and for owners performing injector maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive repair shops replacing injectors during tune-ups\u003c\/li\u003e\n  \u003cli\u003eIndependent mechanics needing OEM-style seals for repairs\u003c\/li\u003e\n  \u003cli\u003eDIY enthusiasts performing injector reseals or rebuilds\u003c\/li\u003e\n  \u003cli\u003eFleet maintenance teams stocking common service kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eProduct specifications: Auto Part category; item package weight approximately 0.48 kilograms; package dimensions roughly 5.4 cm L x 22.0 cm W x 28.2 cm H; country of origin United States. Keep the original packaging and part number (7135-276) handy to confirm compatibility with your vehicle or injector model.\u003c\/p\u003e\n\n\u003cp\u003eWho is this for: The Delphi 7135-276 Fuel Injector Installation Kit is suited for professional mechanics, service departments, and informed vehicle owners who need reliable replacement seals and hardware for Delphi-style fuel injectors. If you want an OEM-fit kit manufactured in the United States that simplifies injector service and reduces post-installation issues, this kit is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Delphi 7135-276 kit include O-rings for both rail and injector?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit supplies O-rings sized for the fuel rail and the injector body to restore proper sealing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit made in the United States?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Delphi 7135-276 Fuel Injector Installation Kit is manufactured in the United States.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67587504799929,"sku":"B002M1BRYI","price":94.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-7135-276-front-packaging_jpg.jpg?v=1790510798"},{"product_id":"delphi-throttle-position-sensor-ss10382-vehicle-specific-oe-fit-tps-sealed-plug-in","title":"Delphi Throttle Position Sensor SS10382 — Vehicle-Specific OE-Fit TPS, Sealed Plug-In","description":"\u003cp\u003e\u003cstrong\u003eDelphi SS10382 is a vehicle-specific throttle position sensor engineered to match original equipment fit and restore accurate throttle angle feedback for the engine control system.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt by Delphi — a long-established OE supplier with decades of design and manufacturing experience — the SS10382 TPS is designed for direct-fit replacement where manufacturers specify Delphi components. It delivers the electrical and mechanical compatibility needed for seamless integration, helping maintain factory calibration and throttle response without complex modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SS10382 ensure reliable throttle position readings?\u003c\/h3\u003e\n\u003cp\u003eThe SS10382 is manufactured to Delphi's OEM-oriented standards for consistent signal output and mechanical tolerance. Precision internal components and a robust housing reduce drift and help sustain accurate voltage or resistance changes as the throttle shaft moves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to OE fit and electrical specs for plug-and-play replacement\u003c\/li\u003e\n  \u003cli\u003eDurable internal sensing element for stable readings over time\u003c\/li\u003e\n  \u003cli\u003eSealed construction to resist contaminants and moisture\u003c\/li\u003e\n  \u003cli\u003eConnector designed to match original wiring harness for correct pinout\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this Delphi part different from generic sensors?\u003c\/h3\u003e\n\u003cp\u003eDelphi leverages original-equipment experience and quality-control processes that mimic factory components. That means the SS10382 aims to meet the same fit, form, and function expectations as the part it replaces, reducing the chance of calibration or check-engine light issues tied to mismatched sensors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE heritage and engineering for consistent fitment\u003c\/li\u003e\n  \u003cli\u003eManufactured to match vehicle-specific requirements\u003c\/li\u003e\n  \u003cli\u003eIncludes the throttle position sensor assembly only, as listed\u003c\/li\u003e\n  \u003cli\u003eDesigned to work with the vehicle's existing control module and harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and compatibility checking?\u003c\/h3\u003e\n\u003cp\u003eThe SS10382 is a vehicle-specific unit intended for straightforward swap-in replacement when you choose the correct application for your car. Installation typically follows the original removal procedure, using the same mounting points and electrical connector, which minimizes labor and avoids custom wiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFit type: vehicle-specific — confirm compatibility with your make, model, and year\u003c\/li\u003e\n  \u003cli\u003eUses OEM-style connector for direct plug-in to the factory harness\u003c\/li\u003e\n  \u003cli\u003eNo calibration equipment usually required if matched to correct application\u003c\/li\u003e\n  \u003cli\u003eWorks with the vehicle’s existing throttle linkage and mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich quality features should you expect from Delphi parts like this TPS?\u003c\/h3\u003e\n\u003cp\u003eDelphi parts are produced under strict quality standards that reflect the company’s long OE background. The SS10382 benefits from engineering practices that favor durability, electrical stability, and compatibility with factory control systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured by an OE supplier with extensive industry patents and experience\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet original equipment performance and fit criteria\u003c\/li\u003e\n  \u003cli\u003eBuilt for consistent electrical output and resistance to environmental exposure\u003c\/li\u003e\n  \u003cli\u003eSold as an OEM-part-level replacement to simplify service and sourcing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi SS10382 throttle position sensor is suited for owners and technicians replacing a failed or aging TPS on vehicles that list Delphi SS10382 in their OEM-equivalent parts guide. Choose this sensor if you need a direct-fit, vehicle-specific replacement that preserves factory wiring and throttle control characteristics.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Delphi SS10382 a direct replacement for OEM throttle position sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The SS10382 is built to vehicle-specific OE standards for plug-and-play replacement when matched to the correct application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need to recalibrate the throttle after installing this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: In most cases no recalibration is required if the part matches the vehicle application; follow the manufacturer's service steps if a relearn is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67587506536633,"sku":"B000CGG1HS","price":85.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-ss10382-front-view.jpg?v=1790510932"},{"product_id":"delphi-ignition-coil-ce20003-direct-fit-replacement-oe-quality-includes-installation-accessories","title":"Delphi ignition coil CE20003 - direct-fit replacement, OE-quality, includes installation accessories","description":"\u003cp\u003e\u003cstrong\u003eDelphi CE20003 Ignition Coil is a direct-fit replacement coil engineered to restore reliable spark delivery, stable engine performance, and consistent starts in compatible vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to Delphi's OE-derived specifications, the CE20003 is manufactured and tested to deliver the voltage transfer and durability modern ignition systems demand. It arrives with the necessary accessories for installation and is designed to work as part of an integrated engine management system to help support efficient combustion and smoother operation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the CE20003 improve starting and idle consistency?\u003c\/h3\u003e\n\u003cp\u003eThe CE20003 supplies stable, high-voltage spark energy to the plug, which helps reduce misfires during cold starts and steady idling. Its optimized winding and insulation support consistent spark timing under varying engine loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered windings for steady voltage output\u003c\/li\u003e\n  \u003cli\u003eReinforced insulation to resist heat and electrical leakage\u003c\/li\u003e\n  \u003cli\u003eDirect-fit connector to maintain factory signal timing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this Delphi coil dependable for everyday driving?\u003c\/h3\u003e\n\u003cp\u003eDelphi uses precision manufacturing and quality-control testing so each coil meets tight tolerances and endures harsh operating conditions. That reduces the risk of premature failure and keeps ignition performance stable over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-level materials and assembly processes\u003c\/li\u003e\n  \u003cli\u003eTested under extreme conditions for durability\u003c\/li\u003e\n  \u003cli\u003eIncludes installation accessories for a complete replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the CE20003 fit my vehicle and require special programming?\u003c\/h3\u003e\n\u003cp\u003eThe CE20003 is a direct-fit ignition coil designed for specific vehicle applications; no ECU reprogramming is normally required if it matches your vehicle's OEM part number. Always verify compatibility with your make, model, year, and engine variant before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck OE reference numbers and fitment guides\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connector—no typical adaptation needed\u003c\/li\u003e\n  \u003cli\u003eSpares and connectors included for common installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this ignition coil?\u003c\/h3\u003e\n\u003cp\u003eInstall using manufacturer torque specs and clean mating surfaces to ensure solid electrical and mechanical connections. Periodic inspection of boots, connectors, and mounting hardware helps prolong service life and prevents ignition-related issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFollow torque and routing guidelines during installation\u003c\/li\u003e\n  \u003cli\u003eInspect boots and connectors for cracking or corrosion\u003c\/li\u003e\n  \u003cli\u003eReplace in matched sets when multiple coils show wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: mechanics, DIY owners, and fleet technicians looking for an OE-quality ignition coil replacement will find the Delphi CE20003 suitable where the part number matches. It’s aimed at drivers who expect factory-fit performance, durability under varied driving conditions, and a straightforward swap without unnecessary calibration steps.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote:\u003c\/em\u003e Delphi products purchased through Amazon may not carry Delphi's standard limited warranty; warranty responsibility rests with the seller identified on the order. Verify seller warranty terms before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Delphi CE20003 a direct replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—when matched to your vehicle’s OEM part number, the CE20003 is a direct-fit coil requiring no routine ECU programming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this come with installation accessories?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the coil includes the common accessories needed for a complete replacement install.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67587562766521,"sku":"B000CGFQKG","price":102.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-ce20003-front-view.jpg?v=1790512904"},{"product_id":"delphi-ignition-coil-gn10571-direct-fit-oe-style-replacement-durable-high-voltage-performance","title":"Delphi Ignition Coil GN10571 — Direct-Fit OE-Style Replacement, Durable High-Voltage Performance","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi GN10571 ignition coil delivers OE-quality spark energy to spark plugs for dependable starts, steady running, and efficient combustion.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from Delphi’s century of original-equipment engineering, the GN10571 ignition coil is a direct-fit replacement designed to integrate with modern engine management systems. It is precision-manufactured and tested under demanding conditions to reproduce factory performance, includes the necessary installation accessories, and aims to restore reliable ignition timing and fuel efficiency without guesswork.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the GN10571 improve starting and idle behavior?\u003c\/h3\u003e\n\u003cp\u003eThe coil restores consistent high-voltage delivery to each spark plug so combustion events are strong and repeatable. That consistency reduces misfires, helps shorten crank time during cold starts, and stabilizes idle quality across operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivers steady spark energy for quicker engine starts\u003c\/li\u003e\n  \u003cli\u003eReduces misfire risk that causes rough idle\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design simplifies replacement and timing consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat design features help the coil last in real-world driving?\u003c\/h3\u003e\n\u003cp\u003eDelphi engineers the GN10571 with materials and production tolerances intended to withstand heat, vibration, and repeated electrical stress. Manufacturing controls and component selection aim to give a long service life and reliable operation in compatible applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision manufacturing for consistent build quality\u003c\/li\u003e\n  \u003cli\u003eMaterials chosen to resist thermal and mechanical wear\u003c\/li\u003e\n  \u003cli\u003eTested under extreme conditions to validate durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this coil fit my vehicle and work with modern engine controls?\u003c\/h3\u003e\n\u003cp\u003eThe GN10571 is produced to OE-style specifications so it fits and communicates with the vehicle’s ignition system like the original. It’s intended for compatible applications that require this Delphi part number; always confirm fitment with your vehicle’s VIN or parts guide before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-style electrical and mechanical interfaces for direct replacement\u003c\/li\u003e\n  \u003cli\u003eDesigned to operate within integrated engine management systems\u003c\/li\u003e\n  \u003cli\u003eIncludes required accessories for a complete installation when specified\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there warranty details or purchase considerations I should know?\u003c\/h3\u003e\n\u003cp\u003eDelphi maintains high product standards, but warranty coverage can vary by seller and channel. Products purchased through certain marketplaces may carry seller-specific warranty terms instead of Delphi’s standard limited warranty—review the seller’s warranty information before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelphi-tested quality and OE-level engineering backing the part\u003c\/li\u003e\n  \u003cli\u003eWarranty terms may differ by retailer—check shipment details for coverage\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer fitment checks to avoid installation or compatibility issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi GN10571 ignition coil is for vehicle owners, mechanics, and automotive technicians seeking a factory-style replacement coil to restore spark performance and engine smoothness. It suits anyone who needs a precision-made, direct-fit coil that integrates with modern ignition systems and comes from a long-standing OE supplier—just confirm compatibility with your vehicle before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Delphi GN10571 a direct replacement for OE coils?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the GN10571 is built to OE-style specifications for direct-fit installation in compatible vehicles. Verify fit using your VIN or parts guide.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does Delphi provide a warranty for this ignition coil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Delphi supports OE-level testing, but warranty terms vary by seller. Check the purchase listing for seller-specific warranty details.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67588313874617,"sku":"B00JRWDTVE","price":79.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10571-front-view.jpg?v=1790517910"},{"product_id":"delphi-ignition-coil-gn10048-oe-fit-replacement-coil-with-consistent-high-voltage-spark","title":"Delphi ignition coil GN10048 — OE-fit replacement coil with consistent high-voltage spark","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi GN10048 ignition coil delivers OE-level spark energy and dependable starting performance for compatible vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from a century of original-equipment engineering, the Delphi GN10048 ignition coil is manufactured to provide consistent spark delivery and robust durability under real-world conditions. Designed as a direct-function component in modern engine management systems, it helps support smooth ignition timing, steady idle, and responsive starts. Delphi tests components rigorously and supplies necessary installation accessories to make replacement straightforward for professional technicians and experienced DIYers alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the GN10048 improve cold starts and everyday reliability?\u003c\/h3\u003e\n\u003cp\u003eThe GN10048 is engineered to produce consistent high-voltage output to the spark plug, which helps the engine fire reliably from a cold start and maintain stable combustion during normal driving. Precision winding and insulation reduce energy loss and help the coil hold up under repeated thermal cycling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConsistent spark energy for improved ignition on startup\u003c\/li\u003e\n  \u003cli\u003eThermally resistant materials for repeated heating\/cooling cycles\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet OE voltage delivery specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation details should I expect when replacing an ignition coil?\u003c\/h3\u003e\n\u003cp\u003eDelphi supplies the necessary accessories for a complete installation, and the coil is built to match original equipment form and connector fit. Replacing the coil typically requires removing the engine cover or intake components to access the ignition assembly, disconnecting the electrical connector, and swapping the coil with the new unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-style connectors and mounting points for direct fit\u003c\/li\u003e\n  \u003cli\u003eIncludes accessories needed for a full replacement where applicable\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard workshop tools and common replacement procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the GN10048 help prevent ignition-related check engine lights?\u003c\/h3\u003e\n\u003cp\u003eA correctly functioning ignition coil helps maintain proper combustion and reduce misfires that commonly trigger engine fault codes. While it cannot guarantee the check engine light will never appear, installing a high-quality Delphi coil reduces a frequent source of ignition faults when used in compatible applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces risk of misfires caused by weak or intermittent spark\u003c\/li\u003e\n  \u003cli\u003eSupports consistent engine performance to limit ignition fault codes\u003c\/li\u003e\n  \u003cli\u003ePrecision manufacturing lowers failure variability between units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? The Delphi GN10048 ignition coil is intended for vehicle owners and mechanics who need an OE-level replacement for ignition coils in supported engines. It's a good choice for those wanting durable, precision-made components from a long-standing OEM supplier—especially drivers experiencing misfires, hard starts, rough idle, or those performing scheduled ignition system maintenance. Note that warranty terms differ for products purchased through certain marketplaces—check the seller's warranty details before buying.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Delphi GN10048 a direct fit for my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check vehicle compatibility with your year, make, and model; the GN10048 is designed as an OE-style replacement for specific applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does Delphi include installation accessories with this coil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Delphi includes necessary accessories for a complete job when specified; confirm the product listing for the exact kit contents.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67588400906425,"sku":"B000CGI37Y","price":74.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10048-front-view.jpg?v=1790518489"},{"product_id":"delphi-ignition-control-module-ds10071-direct-fit-oe-layout-short-circuit-over-voltage-protection","title":"Delphi Ignition Control Module DS10071 — Direct-Fit OE Layout, Short-Circuit \u0026 Over-Voltage Protection","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi DS10071 Ignition Control Module is a direct-fit electronic module built to the original equipment layout that manages ignition switching while protecting against short circuits, over-voltage events, and electrostatic discharge.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe DS10071 combines automotive-grade thermal management and protective circuits in a compact package designed for reliable service in gasoline ignition systems. Engineered with the same layout and processes used for original equipment, it focuses on efficient heat transfer, long-term durability, and precise electrical control. Internal current limiting and voltage clamping help safeguard both the module and connected ignition components from transient events.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DS10071 manage heat and improve durability?\u003c\/h3\u003e\n\u003cp\u003eDelphi applied an OE-inspired component layout and manufacturing process to the DS10071 so heat generated during operation is routed away from sensitive electronics. That improves component lifetime and reduces the chance of thermal-related failures under continuous use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimized internal layout for efficient heat dissipation\u003c\/li\u003e\n  \u003cli\u003eDurable materials and assembly methods aligned with OE standards\u003c\/li\u003e\n  \u003cli\u003eCompact packaging that minimizes thermal hotspots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protections are built into this ignition control module?\u003c\/h3\u003e\n\u003cp\u003eThe unit includes multiple protective layers to keep the module and the ignition circuit safe during abnormal events. Built-in short-circuit protection prevents excessive current flow, while over-voltage and ESD defenses protect against electrical spikes and static discharges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShort-circuit detection and response to limit damage\u003c\/li\u003e\n  \u003cli\u003eOver-voltage protection to clamp harmful spikes\u003c\/li\u003e\n  \u003cli\u003eElectrostatic discharge (ESD) safeguards during handling and operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the DS10071 control current and voltage for ignition components?\u003c\/h3\u003e\n\u003cp\u003eInternally, the module uses precise current-limiting circuits and voltage-clamping elements to regulate power delivered to ignition coils and associated electronics. This results in consistent electrical behavior under varying load conditions, helping protect downstream components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal current limit prevents excessive coil or wiring stress\u003c\/li\u003e\n  \u003cli\u003ePrecise voltage clamping reduces transient over-voltage exposure\u003c\/li\u003e\n  \u003cli\u003eStable electrical output across common automotive operating ranges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and what should I check before fitting?\u003c\/h3\u003e\n\u003cp\u003eThe DS10071 is manufactured to match original equipment mounting and connector locations, making it a straightforward replacement for compatible vehicles. Before installation, verify vehicle fitment, inspect connectors for corrosion, and secure proper ground and mounting surfaces to ensure optimal thermal contact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design matches OE mounting points and connectors\u003c\/li\u003e\n  \u003cli\u003eCheck wiring harness condition and connector pins for cleanliness\u003c\/li\u003e\n  \u003cli\u003eEnsure firm chassis ground and tight fasteners for heat transfer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this module for? Mechanics, fleet maintenance teams, and DIY enthusiasts replacing a failing ignition control module who want an OE-style component with layered electrical protections will benefit from the DS10071. It’s suited for anyone needing a robust, serviceable replacement that emphasizes thermal management, short-circuit and over-voltage protection, and controlled current\/voltage behaviour to help protect the rest of the vehicle’s ignition system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the DS10071 fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle’s part compatibility list or OE part number match; the DS10071 is a direct-fit design for compatible models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this module protect against voltage spikes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it includes over-voltage protection and precise voltage clamping to reduce damage from spikes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67588850352313,"sku":"B0054TQV14","price":77.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-ds10071-front-view.jpg?v=1790526445"},{"product_id":"delphi-ignition-coil-replacement-gn10572-direct-fit-oe-quality-includes-installation-hardware","title":"Delphi Ignition Coil Replacement GN10572 — Direct-Fit OE-Quality, Includes Installation Hardware","description":"\u003cp\u003e\u003cstrong\u003eDelphi GN10572 is a direct-fit ignition coil built to restore reliable spark delivery and support consistent engine performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle needs a dependable coil that matches original-equipment performance, the Delphi GN10572 is engineered and tested to integrate with modern engine management systems. Delphi combines a century of OE experience with precision manufacturing to deliver a coil that helps ensure dependable starts, steady idling, and efficient combustion across varied driving conditions. This unit ships with the necessary accessories for a complete installation and is crafted to the tolerances expected of OE suppliers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this ignition coil improve starting and daily drivability?\u003c\/h3\u003e\n\u003cp\u003eThe GN10572 supplies the voltage pulses the spark plug needs to ignite the air\/fuel mixture reliably. Consistent, strong spark energy helps reduce misfires and supports smoother acceleration, especially under load or during cold starts. Proper ignition coil function also helps the engine run more predictably during stop-and-go and highway driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for straightforward replacement\u003c\/li\u003e\n  \u003cli\u003ePrecision-wound coil windings for steady spark output\u003c\/li\u003e\n  \u003cli\u003eReduced likelihood of ignition-related rough idling\u003c\/li\u003e\n  \u003cli\u003eIncludes installation accessories to simplify the job\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes Delphi’s GN10572 meet OE-level expectations?\u003c\/h3\u003e\n\u003cp\u003eDelphi engineers this coil to the same functional standards used for original equipment, combining rigorous testing with consistent manufacturing controls. Components and assembly are selected to withstand heat, vibration, and electrical load encountered in normal vehicle operation. The result is a part designed to behave like the original coil it replaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to precise tolerances with quality-control checks\u003c\/li\u003e\n  \u003cli\u003eMaterials chosen for thermal and electrical durability\u003c\/li\u003e\n  \u003cli\u003eTested under demanding conditions to mirror OE validation\u003c\/li\u003e\n  \u003cli\u003eDesigned for compatibility with vehicle ignition modules and wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install this myself and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eThe GN10572 is a bolt-in replacement for compatible applications and generally installable with basic hand tools. Delphi includes the necessary accessories for a complete swap, reducing the need to source separate components. Always follow your vehicle’s service manual and take appropriate safety precautions when working on the ignition system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit shape and mounting points for easy alignment\u003c\/li\u003e\n  \u003cli\u003eIncluded hardware and connectors to complete installation\u003c\/li\u003e\n  \u003cli\u003eCompatibility depends on vehicle model and year—verify fitment first\u003c\/li\u003e\n  \u003cli\u003eRecommended to reset adaptions per manufacturer guidance when required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this coil affect emissions and check-engine indicators?\u003c\/h3\u003e\n\u003cp\u003eA healthy ignition coil promotes complete combustion, which can help reduce misfire-related emissions and avoid diagnostic trouble codes tied to ignition faults. While the coil supports proper engine function, any check-engine light should be diagnosed with a scanner to confirm the root cause before replacing parts. Delphi’s emphasis on fit and quality aims to reduce ignition-related faults when the correct part is used.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps minimize misfires that trigger emission-related codes\u003c\/li\u003e\n  \u003cli\u003eSupports steady combustion to aid emission control systems\u003c\/li\u003e\n  \u003cli\u003eNot a guaranteed fix for unrelated engine management faults\u003c\/li\u003e\n  \u003cli\u003eUse diagnostic tools to identify true ignition module or sensor issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi GN10572 ignition coil is aimed at owners and technicians who need an OE-level replacement for a compatible vehicle—drivers wanting reliable starting, reduced misfires, and a direct-fit part that includes installation accessories. It’s suitable for DIY mechanics comfortable following service procedures, as well as professional shops seeking a tested component from an established OE supplier.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the GN10572 a direct-fit replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s designed as a direct-fit coil for compatible models—verify vehicle fitment before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this coil include installation hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, Delphi supplies the necessary accessories for a complete installation in the package.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67588941971641,"sku":"B079YWJK1Q","price":75.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10572-front-view.jpg?v=1790528468"},{"product_id":"delphi-camshaft-position-sensor-ss11370-oe-fit-digital-output-high-signal-to-noise-for-accurate-timing","title":"Delphi camshaft position sensor SS11370 — OE-fit digital output, high signal-to-noise for accurate timing","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi SS11370 is a camshaft position sensor engineered to deliver a clear digital signal so your engine control unit receives accurate camshaft timing data.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDelphi builds the SS11370 to the same standards it supplies to global OEMs, using validated components and production in ISO-certified facilities. Designed for dependable fit and long-term durability, this sensor supports ignition timing and fuel injection control by providing a stable, high signal-to-noise output under varied driving conditions. Delphi’s decades of fuel- and engine-systems expertise inform the design, and the part is tested for endurance and compatibility with fuel blends and temperature cycles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SS11370 help maintain engine timing?\u003c\/h3\u003e\n\n\u003cp\u003eThe SS11370 detects camshaft position and converts that mechanical position into a digital electrical signal the engine control unit uses to sequence ignition and injection events. A reliable camshaft signal helps the ECU identify cylinder phase and synchronize fuel and spark. Replacing a failing sensor with an OE-quality unit reduces the risk of timing-related misfires and improves control over combustion events.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDigital output with high signal-to-noise ratio for clear ECU communication\u003c\/li\u003e\n  \u003cli\u003eEngineered to match OEM electrical and mechanical specifications for correct timing reference\u003c\/li\u003e\n  \u003cli\u003eRobust against electrical interference to preserve accurate timing data\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this Delphi sensor durable in demanding engine environments?\u003c\/h3\u003e\n\n\u003cp\u003eThe SS11370 is built from materials and components validated by Delphi and produced in an ISO-certified plant to withstand heat, vibration, and chemical exposure common around the engine. The design focuses on sensor protection and thermal resilience so the unit maintains consistent performance over time. Delphi also tests parts for extended endurance to help ensure reliability across service life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThermally resistant construction to tolerate engine bay temperature cycles\u003c\/li\u003e\n  \u003cli\u003eSealed housing and robust connector design to resist contaminants\u003c\/li\u003e\n  \u003cli\u003eManufactured with Delphi-validated components and production controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the SS11370 fit my vehicle and how is installation handled?\u003c\/h3\u003e\n\n\u003cp\u003eFitment depends on vehicle make, model, engine variant, and the OEM part number the SS11370 replaces. Delphi supplies this part to match intended applications, and proper fit typically requires matching the sensor’s mounting pattern and electrical connector to the vehicle. Installation is generally straightforward for technicians: remove the old sensor, position the new sensor, secure its fastener(s), and reconnect the wiring harness while following torque and safety guidelines.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCheck vehicle compatibility with the SS11370 before purchase\u003c\/li\u003e\n  \u003cli\u003eDirect replacement design for intended applications where specified\u003c\/li\u003e\n  \u003cli\u003eStandard installation steps: unbolt, swap sensor, reconnect harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat testing and quality standards support Delphi parts?\u003c\/h3\u003e\n\n\u003cp\u003eDelphi subjects the SS11370 and other components to rigorous testing protocols developed from decades of OEM supply experience. Parts follow Delphi’s internal validation and are produced in ISO-certified facilities, with performance trials that simulate long-term use and exposure to ethanol blends and other fuel conditions. These processes aim to deliver consistent electrical output and fitment aligned with vehicle specifications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eManufactured in ISO-certified production facilities\u003c\/li\u003e\n  \u003cli\u003eEngineered and validated using OE-grade components and processes\u003c\/li\u003e\n  \u003cli\u003eTested for endurance and compatibility with modern fuel blends\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi SS11370 is intended for vehicle owners, fleet managers, and professional technicians seeking an OE-quality camshaft position sensor replacement. It’s aimed at applications requiring precise camshaft timing signals and a durable, validated part from a supplier with long-term experience in fuel and engine systems. Verify compatibility with your vehicle’s specifications and follow professional installation practices for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the SS11370 replace OEM camshaft sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s designed as a direct-fit replacement for specified OEM applications—confirm compatibility with your vehicle’s year, make, and engine model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Delphi SS11370 covered by Delphi’s standard warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Parts bought through this site do not fall under Delphi’s standard limited warranty; warranty terms are provided by the seller on your order.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67590338347193,"sku":"B079Y5XL3J","price":83.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-ss11370-front-view.jpg?v=1790534298"},{"product_id":"delphi-ignition-coil-gn10172-direct-fit-oe-style-precision-winding-long-life","title":"Delphi Ignition Coil GN10172 - Direct-Fit OE-Style, Precision Winding \u0026 Long Life","description":"\u003cp\u003e\u003cstrong\u003eDelphi GN10172 Ignition Coil is a direct-fit, OE-style ignition coil that delivers consistent spark energy to help ensure reliable starting and steady engine performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis Delphi ignition coil is built to function as part of your vehicle's engine management system, supplying voltage to spark plugs and supporting responsive combustion under everyday driving conditions. Designed and tested using Delphi’s long history of OE engineering, the GN10172 meets demanding manufacturing standards and comes with the necessary accessories for installation. It focuses on precise voltage delivery, long service life, and compatibility with compatible vehicle applications to help maintain smooth operation and reduce ignition-related interruptions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this ignition coil improve vehicle starting and idle?\u003c\/h3\u003e\n\u003cp\u003eThe GN10172 provides consistent high-voltage output to spark plugs so ignition timing remains reliable at startup and during idle. That steady spark helps the engine fire predictably, reducing missed ignitions and rough idling when the coil is functioning properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConsistent spark energy for fewer misfires\u003c\/li\u003e\n  \u003cli\u003ePrecision-wound coil for stable voltage delivery\u003c\/li\u003e\n  \u003cli\u003eOE-style fit to preserve factory ignition timing\u003c\/li\u003e\n  \u003cli\u003eIncludes installation accessories for a full replacement job\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this the right replacement for my vehicle’s ignition system?\u003c\/h3\u003e\n\u003cp\u003eGN10172 is produced to OE-level specifications and designed as a direct-fit option for compatible applications listed by Delphi or your parts supplier. Confirm vehicle compatibility by checking part cross-reference information or entering your year, make, and model before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to meet original equipment tolerances\u003c\/li\u003e\n  \u003cli\u003eManufactured with Delphi quality-control processes\u003c\/li\u003e\n  \u003cli\u003eVerify exact fit using VIN or vehicle compatibility tools\u003c\/li\u003e\n  \u003cli\u003eSold with the connectors and seals needed for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe GN10172 uses optimized coil design and precision manufacturing to deliver reliable performance over time. Delphi tests components under challenging conditions to help ensure they withstand heat, vibration, and electrical stress commonly encountered in engine compartments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimized winding and insulation for efficient voltage transfer\u003c\/li\u003e\n  \u003cli\u003eDurable housing materials for heat and vibration resistance\u003c\/li\u003e\n  \u003cli\u003eFactory-calibrated characteristics to match ignition requirements\u003c\/li\u003e\n  \u003cli\u003eQuality testing aimed at long service life and consistent output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for a trained technician or experienced DIYer when the part is verified as compatible. Delphi supplies the necessary accessories so you won’t need to improvise during a standard replacement procedure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design for straightforward bolt-in installation\u003c\/li\u003e\n  \u003cli\u003eIncludes seals, boots, or connectors as required for a complete job\u003c\/li\u003e\n  \u003cli\u003eWorks with standard ignition wiring and mounting points\u003c\/li\u003e\n  \u003cli\u003eRefer to vehicle service manual for torque and installation sequence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Delphi GN10172 Ignition Coil is for vehicle owners and mechanics seeking a reliable, OE-style ignition coil that restores factory-like spark delivery. It suits those replacing a failed coil, correcting intermittent misfires, or performing scheduled ignition system maintenance on compatible cars. If you need a durable replacement built to OE engineering standards and tested for real-world conditions, GN10172 is designed to meet those expectations—just verify fitment for your specific vehicle before ordering.\u003c\/p\u003e\n\n\u003cdiv\u003e\n  \u003ch4\u003eManufacturer notes\u003c\/h4\u003e\n  \u003cp\u003eWhen purchased through third-party marketplaces, Delphi’s standard LIMITED warranty may not apply; warranty terms are provided by the selling party on the order shipment details. Review warranty information with the seller prior to purchase.\u003c\/p\u003e\n  \u003ch4\u003eFeatures\u003c\/h4\u003e\n  \u003cul\u003e\n    \u003cli\u003eOE-level performance for reliable spark energy and smooth engine operation\u003c\/li\u003e\n    \u003cli\u003eEngineered for dependable starting and combustion across driving conditions\u003c\/li\u003e\n    \u003cli\u003ePrecision manufacturing to help ensure consistent operation and service life\u003c\/li\u003e\n    \u003cli\u003eOptimized coil design to promote efficient voltage delivery and spark generation\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the GN10172 fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check compatibility using your vehicle’s year, make, model, or VIN with the parts lookup tool before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does Delphi cover this part under warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Warranty terms vary by seller; products bought through third-party marketplaces may carry seller-provided warranties only.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67590610649273,"sku":"B004IM6CD0","price":79.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-gn10172-front-view.jpg?v=1790535265"},{"product_id":"delphi-coolant-temperature-sensor-ts10075-direct-fit-oe-replacement-precision-sensing","title":"Delphi Coolant Temperature Sensor TS10075 — Direct-Fit OE Replacement, Precision Sensing","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi TS10075 Coolant Temperature Sensor is a direct-fit replacement sensor that delivers accurate engine coolant readings to maintain proper engine control and performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned and manufactured by Delphi, a long-standing original-equipment supplier, the TS10075 offers OE-quality fitment and electrical performance for compatible vehicles. This sensor measures engine coolant temperature and communicates data to the engine control unit (ECU) so fuel delivery, ignition timing, and cooling fan operation respond correctly. Built to Delphi’s OE standards, it aims to match factory specifications for form, fit, and function.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TS10075 maintain engine performance?\u003c\/h3\u003e\n\u003cp\u003eAccurate coolant temperature input helps the ECU make timely adjustments to fuel mixture and ignition timing, improving driveability and emissions control. A properly working sensor prevents unnecessary rich or lean conditions caused by incorrect temperature readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit electrical connector and thread size for exact OEM replacement\u003c\/li\u003e\n  \u003cli\u003ePrecision sensing element calibrated to factory spec for consistent readings\u003c\/li\u003e\n  \u003cli\u003eRobust housing resists vibration and thermal cycling for stable operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability features of this Delphi sensor?\u003c\/h3\u003e\n\u003cp\u003eThe TS10075 is built using materials and processes informed by Delphi’s OE experience to withstand exposure to coolant, heat, and engine vibration. Its construction minimizes signal drift and corrosion over time, extending service life compared with low-quality aftermarket options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant terminals and sealing to guard against coolant intrusion\u003c\/li\u003e\n  \u003cli\u003eThermally stable sensing element for repeatable output across temperature ranges\u003c\/li\u003e\n  \u003cli\u003eSturdy body design resists mechanical wear during installation and operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know this sensor is the right fit for my vehicle?\u003c\/h3\u003e\n\u003cp\u003eDelphi supplies parts that reflect OE heritage, so the TS10075 is engineered to match original specifications for vehicles listed by fitment. Always verify part compatibility by cross-referencing your vehicle’s make, model, year, and engine code or consult the vehicle’s parts catalog before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck vehicle application charts or Delphi part cross-reference for confirmation\u003c\/li\u003e\n  \u003cli\u003eCompare thread size, connector type, and electrical pinout with the factory sensor\u003c\/li\u003e\n  \u003cli\u003eOEM-style packaging and part numbering simplify identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard sensor-replacement procedures: locate the existing coolant temperature sensor, disconnect the electrical connector, remove the old sensor, and install the Delphi TS10075 with proper torque and sealing. Routine precautions—draining a small amount of coolant and ensuring a clean sealing surface—make the swap straightforward for a DIYer or technician.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-compatible connector reduces wiring modifications—plug-and-play fit\u003c\/li\u003e\n  \u003cli\u003eInstall with correct torque and a new sealing washer where required\u003c\/li\u003e\n  \u003cli\u003eRefill and bleed cooling system as needed after replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Mechanics, DIY enthusiasts, and fleet managers seeking a reliable OE-quality coolant temperature sensor that restores correct engine temperature readings and control. If you need a direct-fit replacement that mirrors factory specifications and benefits from Delphi’s decades of OE experience, the TS10075 is engineered to meet those expectations without unnecessary complexity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the TS10075 fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Verify fitment by checking your vehicle’s make, year, engine code and Delphi part cross-reference; confirm thread and connector match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace the coolant sensor myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Basic mechanical skills, proper tools, torque and coolant handling are required; drain\/bleed cooling system after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67593091219641,"sku":"B000CGM9O2","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-ts10075-front-view-sensor.jpg?v=1790571779"},{"product_id":"delphi-abs-speed-sensor-ss10311-oe-equivalent-direct-fit-corrosion-resistant-housing","title":"Delphi ABS speed sensor SS10311 — OE-equivalent direct-fit, corrosion-resistant housing","description":"\u003cp\u003e\u003cstrong\u003eThe Delphi SS10311 ABS speed sensor is an OE-grade wheel-speed sensor designed to restore accurate ABS and traction control input with direct-fit compatibility for specified vehicle applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered by Delphi — an original-equipment supplier with decades of automotive experience — the SS10311 delivers the precise vehicle-speed signal needed by anti-lock braking and stability systems. Built for vehicle-specific fitment, this sensor replaces worn or damaged units to help return system responsiveness and diagnostic clarity without modifying factory wiring or brackets.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SS10311 ensure correct ABS and traction readings?\u003c\/h3\u003e\n\u003cp\u003eThe sensor converts wheel or tone-ring movement into an electrical signal the vehicle’s controller uses to monitor wheel speed. Delphi designs the sensing element and connector to match OE signal characteristics, minimizing calibration differences and fault codes after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-equivalent signal output tuned for original controller expectations\u003c\/li\u003e\n  \u003cli\u003eFactory-matching mounting and electrical connector for consistent alignment\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials to preserve electrical continuity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this sensor a dependable replacement?\u003c\/h3\u003e\n\u003cp\u003eDelphi applies decades of supply experience to component durability, using materials and tolerances aligned with original parts. That focus reduces premature failures and keeps replacement intervals similar to the factory schedule.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle-specific fitment prevents stress on mounting points or wiring\u003c\/li\u003e\n  \u003cli\u003eRobust housing and seal design protect the internal sensing element\u003c\/li\u003e\n  \u003cli\u003eManufactured to match OE electrical and mechanical specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and compatibility with my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe SS10311 is a direct-replacement, designed to plug into the existing harness and bolt into the original sensor location. For best results, confirm the listed OEM equivalent or vehicle application before purchasing to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit part tailored to specific models, reducing installation time\u003c\/li\u003e\n  \u003cli\u003eOEM-equivalent part reference: FORD%F3TZ2L373A for cross-checking fitment\u003c\/li\u003e\n  \u003cli\u003eNo splicing or adapter parts typically required when matched to the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or checks should be done after replacing the sensor?\u003c\/h3\u003e\n\u003cp\u003eAfter installation, it’s good practice to clear any ABS-related fault codes and perform a road test to confirm the system reports wheel-speed correctly. Inspect the mating connector and tone ring for damage before and after mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScan and clear ABS\/traction codes after fitting to reset system learning\u003c\/li\u003e\n  \u003cli\u003eCheck connector pins for corrosion and ensure secure engagement\u003c\/li\u003e\n  \u003cli\u003eVerify tone ring and bearing condition to avoid re-triggering faults\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi SS10311 ABS speed sensor is intended for technicians and DIY installers seeking a direct-fit, OE-quality replacement for compatible vehicles. It’s a practical choice when restoring accurate wheel-speed feedback to ABS, stability control, or traction systems without modifying factory components. Verify vehicle application and the OEM-equivalent part number before purchase to ensure proper fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Delphi SS10311 a direct replacement for factory sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The SS10311 is vehicle-specific and designed as a direct-fit OE-equivalent replacement when matched to the correct application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need special tools to install this ABS speed sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No specialized tools are normally required; basic hand tools and a scanner to clear ABS codes are usually sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67593662365881,"sku":"B0019IJAL2","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-ss10311-front-view.jpg?v=1790577478"},{"product_id":"delphi-oxygen-sensor-es10966-direct-fit-oe-style-sensor-planar-sensing-e85-compatible","title":"Delphi Oxygen Sensor ES10966 — Direct-Fit OE-Style Sensor, Planar Sensing \u0026 E85 Compatible","description":"\u003cp\u003e\u003cstrong\u003eDelphi Oxygen Sensor ES10966 is a direct-fit exhaust oxygen sensor that measures exhaust oxygen content and supplies the engine control module with precise data to optimize air–fuel balance and emissions management.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe ES10966 is designed to replace a vehicle’s original oxygen sensor with OE-style performance, using Delphi’s planar sensing technology and protective coatings to maintain accurate readings under difficult exhaust conditions. It monitors oxygen concentration so the engine control module can adjust fuel delivery and ignition timing for better combustion control across varying altitudes, temperatures, and loads.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the ES10966 help the engine manage fuel and emissions?\u003c\/h3\u003e\n\u003cp\u003eThe ES10966 provides real-time oxygen-level measurements to the engine control module, enabling quick corrections to the air–fuel mixture. Accurate feedback reduces the chance of prolonged rich or lean running and supports emission-control systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivers continuous exhaust oxygen readings for closed-loop fuel control\u003c\/li\u003e\n  \u003cli\u003eSupports precise air–fuel ratio adjustments for efficient combustion\u003c\/li\u003e\n  \u003cli\u003eHelps catalytic converters operate within their designed window\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat design features improve durability and fitment?\u003c\/h3\u003e\n\u003cp\u003eDelphi engineered the ES10966 with a protective coating over the sensing element to resist contamination from soot, oil, and road debris. The sensor’s compact, planar construction simplifies installation and broadens application coverage without compromising OE-style function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePatented protective coating reduces fouling and degradation\u003c\/li\u003e\n  \u003cli\u003ePlanar sensing element for consistent response and longevity\u003c\/li\u003e\n  \u003cli\u003eEngineered to match OE physical dimensions for direct fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this sensor compatible with different fuel types and driving conditions?\u003c\/h3\u003e\n\u003cp\u003eThe ES10966 has been validated to work with gasoline and ethanol-blend fuels, including E85, and tested through thermal and durability cycles to ensure stable operation. Its performance holds up across common driving scenarios and environmental changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTested for gasoline and ethanol-blend (E85) compatibility\u003c\/li\u003e\n  \u003cli\u003eThermally validated for stable readings through temperature swings\u003c\/li\u003e\n  \u003cli\u003eDesigned to function across varied altitudes and engine loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically follows OE procedures: remove the old sensor, thread in the replacement, and connect the wiring harness. No special tuning is required as the sensor provides the same type of signal expected by the vehicle’s engine control module.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement using OE-style connector and threads\u003c\/li\u003e\n  \u003cli\u003eNo recalibration in most applications; ECM will adapt to the sensor signal\u003c\/li\u003e\n  \u003cli\u003eInspect wiring and exhaust threads for corrosion before fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this part for? The Delphi ES10966 is suited for technicians, repair shops, and DIY enthusiasts who need a dependable direct-fit oxygen sensor that matches OE performance expectations. It’s a practical choice for anyone replacing a failed or aging upstream\/downstream O2 sensor on compatible gasoline or ethanol-blend vehicles and who wants validated durability and broad application coverage. Note: purchases made through Amazon may carry a seller-provided warranty rather than Delphi’s standard limited warranty; review seller warranty terms prior to purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the ES10966 work with ethanol blends like E85?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ES10966 is validated for compatibility with gasoline and ethanol-blend fuels, including E85.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to program the vehicle after installing this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: In most cases no; the ECM adapts to the replacement sensor’s signal without additional programming.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67593662431417,"sku":"B001BFRS5I","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-es10966-front-view.jpg?v=1790577478"},{"product_id":"delphi-crankshaft-position-sensor-ss11407-digital-output-oem-fit-replacement-for-improved-timing-and-durability","title":"Delphi crankshaft position sensor SS11407 — digital output, OEM-fit replacement for improved timing and durability","description":"\u003cstrong\u003eDelphi SS11407 is a crankshaft position sensor designed to deliver precise crankshaft position and engine speed signals to the engine control module for accurate ignition and fuel management.\u003c\/strong\u003e\n\n\u003cp\u003eThis Delphi sensor brings original-equipment engineering and rigorous testing to aftermarket replacement. Built with digital output design and durable materials, the SS11407 is intended to match or exceed factory signal performance while resisting heat and contaminants common in the engine bay. Delphi parts are developed with decades of OEM experience and undergo extensive durability testing to ensure fit, function, and reliable operation over time.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SS11407 improve engine timing and responsiveness?\u003c\/h3\u003e\n\u003cp\u003eThe SS11407 uses a precisely controlled sensing gap and digital output to generate a clean crankshaft position signal. A stable, high signal-to-noise output helps the engine control module determine crankshaft angle and engine speed more accurately, supporting consistent ignition timing and fuel injection events.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision sensing gap for repeatable pulses\u003c\/li\u003e\n  \u003cli\u003eDigital signal design reduces electrical noise\u003c\/li\u003e\n  \u003cli\u003eStable output supports accurate ignition timing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sensor fit my vehicle and match OEM performance?\u003c\/h3\u003e\n\u003cp\u003eDelphi manufactures the SS11407 to meet or surpass original equipment specifications so it can be used as a direct replacement in compatible applications. Always confirm vehicle compatibility with the part number and connector style before purchasing to ensure correct fit and reliable communication with the vehicle’s control module.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to OEM form, fit, and function\u003c\/li\u003e\n  \u003cli\u003eDigital output aligns with modern engine control systems\u003c\/li\u003e\n  \u003cli\u003eCheck part number and connector for correct fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Delphi crankshaft position sensor under real-world conditions?\u003c\/h3\u003e\n\u003cp\u003eDelphi designs the SS11407 for endurance in harsh under-hood environments, with materials and sealing that withstand temperature cycles, vibration, and exposure to contaminants. Delphi’s testing protocols include long-term durability trials to help ensure the sensor maintains reliable operation throughout its service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt to resist heat-related performance shifts\u003c\/li\u003e\n  \u003cli\u003eRobust protection against moisture and debris\u003c\/li\u003e\n  \u003cli\u003eDesigned for consistent performance across temperature ranges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat benefits will I notice after installing the SS11407?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or faulty crankshaft position sensor with the SS11407 can restore accurate engine timing information, which typically improves idle stability, throttle response, and drivability. Proper crankshaft feedback also supports efficient fuel injection and emissions control systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved idle smoothness and acceleration response\u003c\/li\u003e\n  \u003cli\u003eConsistent engine speed sensing for better control\u003c\/li\u003e\n  \u003cli\u003eSupports emissions and fuel management systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Delphi SS11407 is suited for technicians, independent repair shops, and vehicle owners seeking an OE-quality replacement crankshaft position sensor. It’s a practical choice when diagnosing timing-related drivability issues or when restoring factory-level signal performance after sensor failure. Verify compatibility with your vehicle’s make and model and consult installation guides or a professional installer if needed.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know if the SS11407 is compatible with my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match the SS11407 part number and connector style to your vehicle’s service manual or parts lookup tool to confirm compatibility before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the Delphi crankshaft sensor myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Many owners can install it with basic tools, but tight engine spaces may need professional installation to ensure correct timing and connector seating.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Delphi","offers":[{"title":"Default Title","offer_id":67595611799737,"sku":"B079XZ56DH","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/delphi-ss11407-front-view.jpg?v=1790590867"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/delphi-ss11407-front-view_8d289529-109e-4d40-8ab5-6290d36520a7.jpg?v=1790612644","url":"https:\/\/redleafauto.ca\/collections\/delphi.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}