{"title":"Design Engineering","description":"\u003cp\u003eBrowse 20 Design Engineering products at RedLeaf Auto, including exhaust \u0026amp; emissions parts and body \u0026amp; trim parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"design-engineering-fuel-rail-injector-cover-kit-for-1997-2004-jeep-4-0l-inline-6-aluminum-heat-shield-injector-sleeves","title":"Design Engineering Fuel Rail \u0026 Injector Cover Kit for 1997–2004 Jeep 4.0L inline‑6 — aluminum heat shield, injector sleeves","description":"\u003cstrong\u003eDesign Engineering's Fuel Rail \u0026amp; Injector Cover Kit is a heat-shield system made to lower fuel rail and injector temperatures on 1997–2004 Jeep Wrangler and Cherokee 4.0L inline‑6 engines.\u003c\/strong\u003e\n\nThis kit supplies a manifold heat shield, a protective fuel rail cover, six injector sleeves, and 12 OE replacement O‑rings — all built from high‑temperature glass‑fiber backed aluminum to reflect radiant engine heat away from sensitive fuel components. Installation is designed for a knowledgeable DIYer and uses hook‑and‑loop fasteners so you can fit the shields without disassembling large portions of the engine. Made in the USA by Design Engineering (DEI), the set targets heat soak and helps preserve fuel stability and component longevity in hot or demanding operating conditions.\n\n\u003ch3\u003eHow does this kit reduce heat soak and the risk of vapor lock?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses reflective aluminum skin over high‑temp insulation to block radiant heat from the exhaust and cylinder head before it reaches the fuel rail and injectors. By lowering surrounding temperatures, fuel remains closer to ambient density and is less likely to vaporize prematurely under load or high ambient heat.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum outer layer reflects radiant engine heat.\u003c\/li\u003e\n\u003cli\u003eGlass‑fiber backing provides thermal insulation and durability.\u003c\/li\u003e\n\u003cli\u003eManifold cover sandwiches insulation for added protection.\u003c\/li\u003e\n\u003cli\u003eInjector sleeves isolate each injector from surrounding heat sources.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly is included and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eThe kit is comprehensive: a dual‑sided manifold shield, a formed fuel rail cover, six individual injector covers, and a set of 12 OE replacement O‑rings for leak‑free reassembly. All items are constructed with a glass‑fiber core and aluminum skin capable of handling high under‑hood temperatures while resisting abrasion and oil exposure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual‑layer manifold shield with high‑temp insulation core.\u003c\/li\u003e\n\u003cli\u003eAluminum‑skinned fuel rail cover shaped for inline‑6 rails.\u003c\/li\u003e\n\u003cli\u003eSix snug injector sleeves to wrap around each injector body.\u003c\/li\u003e\n\u003cli\u003eTwelve OE‑spec replacement O‑rings for secure fuel connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended for a home mechanic and avoids complex disassembly; the kit uses hook‑and‑loop attachments and clear instructions. Basic hand tools are sufficient, though a fuel rail disconnect tool simplifies the job and helps ensure a clean, correct fit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHook‑and‑loop fasteners for straightforward mounting.\u003c\/li\u003e\n\u003cli\u003eRecommended tools: 10mm socket, ratchet, flathead screwdriver, fuel rail disconnect tool.\u003c\/li\u003e\n\u003cli\u003eInstructions included for step‑by‑step guidance.\u003c\/li\u003e\n\u003cli\u003eTypical install time: under two hours for someone familiar with engine work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my vehicle and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eThis kit is engineered specifically for 1997–2004 Jeep Wrangler and Cherokee models equipped with the 4.0L inline‑6 engine, matching factory rail geometry and injector spacing. Materials and construction are chosen for long service life under engine‑bay conditions and resist deterioration from heat, oil, and road contaminants.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle fitment: 1997–2004 Jeep Wrangler and Cherokee, 4.0L inline‑6.\u003c\/li\u003e\n\u003cli\u003eDurable aluminum skin resists oil and grime exposure.\u003c\/li\u003e\n\u003cli\u003eGlass‑fiber backing maintains insulation properties under repeated heat cycles.\u003c\/li\u003e\n\u003cli\u003eMade in the USA for consistent manufacturing standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nThis upgrade is for Jeep owners who regularly drive in hot climates, tow, off‑road, or who want to protect fuel system components from prolonged heat exposure. It suits DIY enthusiasts comfortable with basic engine work and professionals seeking a ready‑to‑install thermal package that restores or improves fuel system temperature management without altering engine performance or fuel system calibration.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2001 Jeep Wrangler 4.0L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Design Engineering kit is made specifically for 1997–2004 Jeep Wrangler and Cherokee 4.0L inline‑6 engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only basic tools are required (10mm socket, ratchet, flathead) and a fuel rail disconnect tool is recommended for easier installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67585184137401,"sku":"B015NOKWQY","price":166.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-front-packaging-fuel-rail-kit.jpg?v=1790469380"},{"product_id":"design-engineering-titanium-exhaust-wrap-2-in-x-35-ft-lava-rock-1800-f-high-temp-flexible","title":"Design Engineering Titanium Exhaust Wrap 2 in x 35 ft Lava Rock — 1800°F High‑Temp, Flexible","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering Titanium Exhaust Wrap is a 2\" x 35' lava-rock fiber wrap that reduces under-hood heat, protects nearby components, and improves exhaust gas flow on high-performance and street vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from pulverized lava rock woven into a proprietary titanium fiber, this exhaust wrap is engineered for demanding automotive and powersports use. The flexible, high-temperature material conforms around bends and complex headers without pre-soaking, resisting vibration, oil, and chemical breakdown while withstanding extreme direct and intermittent temperatures. One roll covers a typical header or several smaller pipes, delivering a durable thermal barrier designed to lower under-hood temperatures and help protect wiring, hoses, sensors, and bodywork from excessive radiant heat.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this wrap lower temperatures under the hood?\u003c\/h3\u003e\n\u003cp\u003eThe wrap traps and retains heat within the exhaust piping so less radiant heat reaches the engine bay. By keeping exhaust gas temperatures higher inside the pipes, the system can move gases more efficiently while reducing ambient heat that can damage nearby components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces radiant heat transfer from headers and downpipes.\u003c\/li\u003e\n  \u003cli\u003eHelps protect hoses, wiring, and engine sensors from heat exposure.\u003c\/li\u003e\n  \u003cli\u003eMaintains hotter exhaust gas temperatures to aid scavenging and flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperatures and conditions will the Titanium wrap tolerate?\u003c\/h3\u003e\n\u003cp\u003eThis product is specifically formulated for high-heat environments: it endures up to 1,800°F continuous direct heat and tolerates intermittent spikes to roughly 2,500°F. The lava-rock-based titanium weave also resists oil and chemical degradation and stands up to vibration common in motorsports and off-road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated to 1,800°F continuous direct heat.\u003c\/li\u003e\n  \u003cli\u003eWithstands intermittent heat spikes around 2,500°F.\u003c\/li\u003e\n  \u003cli\u003eResistant to oil, chemical attack, and mechanical vibration for longer life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and fit on complex exhaust layouts?\u003c\/h3\u003e\n\u003cp\u003eThe wrap’s pliable construction was designed to conform to elbows, collector bowls, and tight header routing without pre-wetting, so installation is faster and neater. It wraps tightly for a secure fit and can be trimmed to length or used with stainless ties, clamps, or ceramic fasteners for final retention.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHighly flexible weave that conforms to bends and collectors.\u003c\/li\u003e\n  \u003cli\u003eNo pre-soaking required — ready to wrap out of the package.\u003c\/li\u003e\n  \u003cli\u003eCan be secured with ties, clamps, or metal fasteners after wrapping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this wrap work on performance bikes, race cars, and trucks?\u003c\/h3\u003e\n\u003cp\u003eYes — the material and temperature ratings make it suitable for a wide range of performance applications, from motorcycles and sportbikes to muscle cars, race vehicles, trucks, and off-road machines. It’s designed to withstand the harsher conditions those environments create while protecting surrounding components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for headers, manifolds, downpipes, and full exhaust sections.\u003c\/li\u003e\n  \u003cli\u003eCommonly used in race, performance, and off-road applications.\u003c\/li\u003e\n  \u003cli\u003eOne 2\" x 35' roll covers multiple smaller pipes or a full header set depending on routing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Design Engineering Titanium Exhaust Wrap is aimed at mechanics, tuners, and vehicle owners who need a reliable thermal barrier for high-temperature exhaust systems. It’s ideal for anyone restoring or upgrading performance exhausts, protecting wiring and components in modified engine bays, or reducing under-hood heat for improved reliability and component longevity. The single roll provides a practical quantity for many projects, and its rugged construction meets the needs of track-day drivers, off-road enthusiasts, and daily drivers seeking durable heat protection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to wet the wrap before installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this titanium lava-rock wrap is designed to be installed dry for a tight, clean fit without pre-wetting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this wrap withstand oil and vibration in an engine bay?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's formulated to resist oil, chemicals, and vibration for reliable long-term performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67585682473145,"sku":"B005Q57X40","price":106.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-wrap-front-roll.jpg?v=1790475258"},{"product_id":"design-engineering-titanium-exhaust-wrap-2-x-50-lava-rock-technology-high-temp-insulation-flexible-fit","title":"Design Engineering Titanium Exhaust Wrap 2\" x 50' Lava Rock Technology — High-Temp Insulation, Flexible Fit","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering Titanium Exhaust Wrap is a 2\" x 50' high-temperature header wrap made with pulverized lava rock and a titanium fiber weave to cut under-hood heat and protect nearby components.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis exhaust wrap uses Design Engineering's Lava Rock Technology to trap heat inside exhaust plumbing, reducing temperatures in the engine bay and improving exhaust gas velocity. Built for demanding automotive and powersports use, the fabric combines extreme-temperature tolerance with flexibility so it conforms to tight bends and complex header shapes without requiring pre-soaking. The 2\" x 50' roll supplies ample length for multiple pipes or a single long run, and the construction resists oil, vibration, and chemical degradation for extended service life.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this wrap lower under-hood temperatures?\u003c\/h3\u003e\n\u003cp\u003eThe wrap insulates exhaust pipes, keeping combustion heat inside the headers instead of radiating into the engine bay. That makes coolant, intake, and electrical components run cooler and reduces heat-related stress on nearby hoses and wiring. It also changes exhaust gas behavior to help maintain higher temperatures within the pipe for improved flow dynamics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered fiber weave traps and limits heat transfer\u003c\/li\u003e\n  \u003cli\u003eWithstands continuous and intermittent high temperatures\u003c\/li\u003e\n  \u003cli\u003eTight wrap reduces radiated heat near sensitive components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperatures and conditions can it handle?\u003c\/h3\u003e\n\u003cp\u003eManufactured from pulverized lava rock woven into a titanium-reinforced fiber, this wrap tolerates continuous direct heat up to very high temperatures and brief spikes far above that. Its chemistry and weave are chosen to resist breakdown from vibration, oil exposure, and common automotive chemicals, extending usable life in harsh environments. This makes it suitable for race applications, off-road use, and performance street vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for sustained high-temperature exposure\u003c\/li\u003e\n  \u003cli\u003eHandles intermittent temperature spikes without failure\u003c\/li\u003e\n  \u003cli\u003eResists oil and chemical degradation for longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install on complex exhaust systems?\u003c\/h3\u003e\n\u003cp\u003eThe wrap is highly pliable, allowing installers to contour it tightly around intricate bends, collectors, and downpipes. Because it doesn’t require pre-wetting, installation is faster and cleaner—no need to soak the material before wrapping. Secure it with stainless-steel ties, clamps, or provided fasteners (not included) to maintain a snug, durable fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlexible fiber conforms to tight radii and bends\u003c\/li\u003e\n  \u003cli\u003eNo pre-wetting needed for straightforward wrapping\u003c\/li\u003e\n  \u003cli\u003eUse stainless tie wire or clamps for long-term retention\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this wrap work for my vehicle type?\u003c\/h3\u003e\n\u003cp\u003eThis 2\" x 50' roll suits a wide range of high-heat applications: headers, manifolds, downpipes, and full exhaust runs on motorcycles, race cars, muscle cars, trucks, and off-road rigs. It's sized for smaller pipes and multi-run header wrapping; multiple rolls can be combined for larger-diameter systems. Consider pipe diameter, routing complexity, and exposure when planning material needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGreat for performance and motorsport exhaust systems\u003c\/li\u003e\n  \u003cli\u003eUseful on motorcycles, cars, trucks, and off-road vehicles\u003c\/li\u003e\n  \u003cli\u003eCombine rolls for larger or longer exhausts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Design Engineering Titanium Exhaust Wrap is aimed at enthusiasts, mechanics, and fabricators who need a durable, high-temperature insulation solution for headers and exhaust plumbing. If you want to reduce under-hood heat, protect nearby components, or optimize exhaust gas behavior on performance and off-road machines, this Lava Rock Technology wrap delivers a flexible, long-lasting option that stands up to severe thermal and chemical conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to wet this wrap before installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this titanium lava-rock wrap is designed to be installed dry, so you can wrap immediately without pre-soaking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this handle race-level exhaust temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it withstands sustained high heat and intermittent spikes typical in racing, while resisting oil and vibration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67585682636985,"sku":"B0722ZGQH2","price":146.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-front-packaging-titanium-wrap.jpg?v=1790475263"},{"product_id":"design-engineering-boom-mat-spray-on-sound-deadener-18-oz-4-pack-sprayable-noise-heat-damping-for-tight-cavities","title":"Design Engineering Boom Mat Spray-On Sound Deadener 18 oz 4-Pack — Sprayable Noise \u0026 Heat Damping for Tight Cavities","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering Boom Mat Spray-On is a spray-applied sound deadening and thermal barrier that reduces road noise, vibrations and rattles in hard-to-reach vehicle areas.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for tight cavities, irregular panels and locations where sheet products can’t reach, this aerosol formula adheres to metal and many uncoated surfaces to quiet vehicles and insulate against heat. Each 18-ounce can delivers a durable coating that resists cracking, can be layered for increased performance and becomes paintable within hours. VOC-compliant nationwide, it’s suitable for automotive, marine and other vehicle applications where reducing noise and thermal transfer matters.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Boom Mat Spray-On reduce road noise and vibrations?\u003c\/h3\u003e\n\u003cp\u003eThe product forms a flexible, damping layer that absorbs vibrational energy and interrupts noise transmission through body panels. Multiple coats increase mass and damping for thicker, quieter coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSprays into crevices and contoured areas where sheet mat cannot conform\u003c\/li\u003e\n  \u003cli\u003eFlexible finish prevents brittle failure that can transfer noise\u003c\/li\u003e\n  \u003cli\u003eApply in layers to increase coverage and damping performance\u003c\/li\u003e\n  \u003cli\u003eRated to tolerate elevated under-hood and underbody temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere should I apply it on my vehicle for best results?\u003c\/h3\u003e\n\u003cp\u003eTarget zones include trunk cavities, inner fender wells, door interiors, rear quarters and body panels — places that radiate road and engine noise or vibrate frequently. Use it wherever access is limited or where a sprayed contour-fitting coat is preferred.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrunk and wheel wells to dampen road and tire sounds\u003c\/li\u003e\n  \u003cli\u003eDoor and quarter interiors to stop panel buzz and rattle\u003c\/li\u003e\n  \u003cli\u003eUndercarriage and engine bay areas for heat and noise management\u003c\/li\u003e\n  \u003cli\u003ePatchy or irregular surfaces where roll-on mats won’t sit properly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long before I can paint over it and how durable is the finish?\u003c\/h3\u003e\n\u003cp\u003eThe coating dries sufficiently to accept paint in about six hours under typical conditions, allowing fast turnaround for cosmetic or protective topcoats. Once cured it stays flexible, resists chipping and helps protect metal against corrosive elements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePaintable after approximately 6 hours of dry time\u003c\/li\u003e\n  \u003cli\u003eRemains flexible to avoid cracking or flaking with panel movement\u003c\/li\u003e\n  \u003cli\u003eHelps shield substrate from moisture, reducing rust risk\u003c\/li\u003e\n  \u003cli\u003eRated to withstand temperatures up to 300°F (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much area will a pack cover and how should I store it?\u003c\/h3\u003e\n\u003cp\u003eOne can covers roughly part of the job; a full 4-pack is useful for several areas or a more comprehensive install. Store cans in a cool, dry place and note the two-year shelf life from the manufacturer date stamped on the can bottom.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApproximate coverage: about 20 square feet per stated quantity as guidance\u003c\/li\u003e\n  \u003cli\u003eBest to apply multiple thin coats rather than a single heavy pass\u003c\/li\u003e\n  \u003cli\u003eVOC-compliant formulation for sale throughout the United States\u003c\/li\u003e\n  \u003cli\u003eTwo-year shelf life; check manufacturer date on the can base\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Enthusiasts, installers and DIYers who want a sprayable solution to quiet and insulate vehicles in areas that are not practical for sheet mats. It’s a practical choice for car restorations, performance builds, sound-system installs or anyone seeking to reduce rattles, road noise and heat transfer without extensive disassembly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Boom Mat Spray-On on painted surfaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It adheres best to clean, uncoated surfaces; painted areas should be scuffed or stripped for optimal bonding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Boom Mat Spray-On safe for high-temperature areas?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it tolerates elevated temperatures (up to about 300°F) and functions as a thermal barrier.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67585845362873,"sku":"B088SNMFVS","price":142.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-boom-mat-spray-on-front-can.jpg?v=1790478610"},{"product_id":"design-engineering-titanium-exhaust-heat-wrap-2in-x-25ft-lava-rock-technology-high-temp-flexible","title":"Design Engineering Titanium Exhaust Heat Wrap 2in x 25ft Lava Rock Technology — High-temp, Flexible","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering Titanium Exhaust Wrap is a 2\" x 25' high-temperature wrap made with Lava Rock Technology to retain exhaust heat, reduce under-hood temperatures, and protect surrounding components.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for high-performance engines, this titanium-fiber exhaust wrap uses pulverized lava rock woven into a proprietary weave to deliver extreme thermal resistance in a flexible, durable form. The roll is sized to fit headers, downpipes, and complex exhaust routing on motorcycles, race cars, trucks, and off-road vehicles. It installs without pre-wetting, resists oil and chemical breakdown, and is built to handle severe operating environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this wrap lower under-hood temperatures?\u003c\/h3\u003e\n\n\u003cp\u003eBy holding exhaust heat inside the headers and pipes, the wrap reduces radiant heat transfer into the engine bay. Cooler under-hood temperatures can protect hoses, wiring, and sensors that are sensitive to long-term heat exposure.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTraps heat within exhaust piping to reduce radiant heat output.\u003c\/li\u003e\n  \u003cli\u003eHelps lower ambient temperatures around critical engine parts.\u003c\/li\u003e\n  \u003cli\u003eSupports improved exhaust gas velocity by keeping gases hotter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperatures and conditions can the Lava Rock Technology withstand?\u003c\/h3\u003e\n\n\u003cp\u003eThe proprietary titanium-fiber weave resists very high thermal loads and intermittent spikes without degrading. It is rated for continuous direct heat up to 1,800°F and intermittent exposure up to 2,500°F, while also resisting vibration, oil exposure, and many chemicals commonly encountered in automotive use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eContinuous direct-heat tolerance to 1,800°F for long-term use.\u003c\/li\u003e\n  \u003cli\u003eIntermittent spike resistance to 2,500°F for transient events.\u003c\/li\u003e\n  \u003cli\u003eRobust against oil, vibration, and chemical breakdown for longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install on complex headers and pipes?\u003c\/h3\u003e\n\n\u0026gt;The wrap’s flexible titanium fiber construction conforms well to bends, joins, and tight routing without the need to wet the material first. Installers can achieve a snug, secure coverage quickly using common fastening methods like stainless steel ties or clamps.\n\n\u003cul\u003e\n  \u003cli\u003eHighly pliable weave wraps tightly around bends and flanges.\u003c\/li\u003e\n  \u003cli\u003eNo pre-soaking required, so installation is faster and cleaner.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard exhaust fastening hardware (ties, clamps).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and parts are best suited for this product?\u003c\/h3\u003e\n\n\u003cp\u003eDesigned for performance applications, the 2\" x 25' roll is a versatile size for smaller headers, motorcycles, and targeted sections on larger systems. It’s ideal for race cars, muscle cars, trucks, off-road machines, and any build where heat management and durability matter.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeaders, downpipes, and exhaust manifolds on performance vehicles.\u003c\/li\u003e\n  \u003cli\u003eMotorcycles and sportbike exhausts for tighter routing needs.\u003c\/li\u003e\n  \u003cli\u003eRepair or upgrade projects where heat protection extends component life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Design Engineering Titanium Exhaust Wrap 2\" x 25' is aimed at mechanics, fabricators, racers, and performance-minded vehicle owners who need a compact, high-capacity wrap that tolerates extreme temperatures. If you seek durable thermal containment for headers or targeted exhaust sections without frequent replacement, this product is intended for those demanding conditions and precision installations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to wet this wrap before installing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — this titanium Lava Rock wrap is designed to be installed dry for faster, cleaner wrapping.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it resist oil and road chemicals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the proprietary weave resists oil, vibration, and common chemical exposure for long service life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67587163291833,"sku":"B072KSBHPJ","price":92.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-front-roll-view.jpg?v=1790501020"},{"product_id":"design-engineering-reflect-a-gold-high-temp-reflective-tape-2-x-15-850-f-heat-shield-uv-resistant","title":"Design Engineering Reflect-A-Gold High-Temp Reflective Tape 2\" x 15' — 850°F Heat Shield, UV-Resistant","description":"\u003cstrong\u003eReflect-A-Gold is a professional-grade, pressure-sensitive high-temperature reflective tape that shields surfaces from radiant heat up to 850°F.\u003c\/strong\u003e\n\n\u003cp\u003eEngineered by Design Engineering, this metalized polyamide polymer laminated to glass cloth forms a lightweight, flexible heat barrier with a high-temperature adhesive backing. The roll format (2\" x 15') makes it simple to apply in tight engine bays, on bulkheads, or around fuel cells. It reflects radiant heat, resists UV exposure, and is built for demanding automotive, motorsports, marine, and industrial environments where sustained high temperatures threaten components and finishes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Reflect-A-Gold protect parts exposed to extreme heat?\u003c\/h3\u003e\n\u003cp\u003eThe product reflects radiant energy away from vulnerable surfaces and creates a thermal break between a heat source and the protected substrate. Its metalized surface combined with glass cloth minimizes heat transfer while the high-temperature adhesive keeps the barrier in place during operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReflective metalized face reduces radiant heat transfer.\u003c\/li\u003e\n  \u003cli\u003eGlass cloth core increases mechanical strength and tear resistance.\u003c\/li\u003e\n  \u003cli\u003eRated for continuous exposure up to 850°F, suitable near exhausts and turbochargers.\u003c\/li\u003e\n  \u003cli\u003ePressure-sensitive adhesive maintains bond on metal, plastic, and composites.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere and how should I apply this high-temp adhesive tape?\u003c\/h3\u003e\n\u003cp\u003eApply Reflect-A-Gold to clean, dry surfaces in areas that require radiant heat control—common uses include firewalls, under-hood panels, engine covers, fuel cell surrounds, and floor pans. The release liner protects the adhesive during handling and can be removed as you position the tape for a precise fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePeel release liner rated up to 325°F for safe installation handling.\u003c\/li\u003e\n  \u003cli\u003eStick directly to metal, painted surfaces, composites, and some plastics.\u003c\/li\u003e\n  \u003cli\u003eOverlap edges for continuous coverage and use additional fasteners if needed for vibration-prone areas.\u003c\/li\u003e\n  \u003cli\u003eTrim with scissors or a utility knife for custom shapes and contours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the tape in outdoor and harsh environments?\u003c\/h3\u003e\n\u003cp\u003eReflect-A-Gold is formulated for long-term performance; the metalized surface resists UV degradation while the glass-cloth laminate offers abrasion resistance and dimensional stability. The pressure-sensitive adhesive is rated for elevated temperatures and maintains adhesion under thermal cycling common to motorsports and marine use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV-resistant face helps preserve reflectivity and appearance outdoors.\u003c\/li\u003e\n  \u003cli\u003eAdhesive formulated for sustained high-temperature adhesion and thermal cycling.\u003c\/li\u003e\n  \u003cli\u003eGlass cloth resists fraying and puncture in rough service conditions.\u003c\/li\u003e\n  \u003cli\u003eLightweight and flexible to conform to curved or irregular surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the tape be removed or repositioned after installation?\u003c\/h3\u003e\n\u003cp\u003eThe pressure-sensitive adhesive is designed to provide a secure, lasting bond; however, it is possible to remove the tape when maintenance or access is required. Removal may require heat or adhesive solvent for long-term installations, and some adhesive residue can be expected on certain substrates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEasy initial placement before full bond develops—press firmly for permanent application.\u003c\/li\u003e\n  \u003cli\u003eUse heat or adhesive remover to aid in peel-off from painted or sensitive surfaces.\u003c\/li\u003e\n  \u003cli\u003eTest on an inconspicuous area if paint or finish is a concern.\u003c\/li\u003e\n  \u003cli\u003eReplacement with fresh tape recommended after removal for continued protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Reflect-A-Gold is aimed at technicians, fabricators, race teams, marine installers, and industrial maintenance crews who need a lightweight, high-temperature reflective barrier that adheres directly to components. If you need durable radiant-heat protection in confined spaces or a conformable solution for curved surfaces and hard-to-reach areas, this 2\" x 15' roll delivers professional-grade performance without heavy bulk. Made in the USA and supplied as rolls or sheets, it fits retrofit and new-build applications where thermal control is a priority.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What maximum temperature can Reflect-A-Gold handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It withstands continuous temperatures up to 850°F and is rated for sustained high-heat exposure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the tape stick to painted surfaces and composites?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the pressure-sensitive adhesive bonds to metal, painted surfaces, plastics, and many composites.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67587270901945,"sku":"B0039Z5TYU","price":96.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-reflect-a-gold-front-of-roll.jpg?v=1790503500"},{"product_id":"design-engineering-reflect-a-gold-high-temp-reflective-adhesive-tape-1-5-x-15-uv-resistant-heat-shield","title":"Design Engineering Reflect-A-Gold High-Temp Reflective Adhesive Tape 1.5\" x 15' — UV‑Resistant, Heat‑Shield","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering Reflect-A-Gold is a lightweight, metalized high-temperature adhesive tape engineered to reflect radiant heat and protect vehicle components in extreme temperature environments.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReflect-A-Gold combines a metalized polyamide surface bonded to glass cloth with a high-temperature pressure-sensitive adhesive to deliver a durable, removable barrier against radiant heat. The roll measures 1.5 inches by 15 feet and is intended for automotive and motorsport applications where temperatures swing rapidly and parts need extra thermal protection. It is easy to shape and apply, resists UV degradation, and the adhesive liner is rated to withstand elevated temperatures during assembly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Reflect-A-Gold reduce heat exposure to nearby components?\u003c\/h3\u003e\n\u003cp\u003eThe reflective metalized layer redirects radiant heat away from vulnerable parts, lowering the heat load on hoses, wiring, and interior panels. The glass cloth core adds dimensional stability and mechanical strength, helping the tape hold shape under vibration and thermal cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReflective metalized polyamide surface redirects infrared and radiant heat.\u003c\/li\u003e\n  \u003cli\u003eGlass cloth reinforcement resists tearing and maintains coverage.\u003c\/li\u003e\n  \u003cli\u003ePressure-sensitive high-temp adhesive bonds quickly to clean substrates.\u003c\/li\u003e\n  \u003cli\u003eAdhesive liner tolerates high assembly temperatures (up to 325°F).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere can I apply this tape on a vehicle or machine?\u003c\/h3\u003e\n\u003cp\u003eUse Reflect-A-Gold on firewalls, engine covers, bulkheads, fuel cell housings, floor pans, and under-seat areas where heat transfer threatens components or passenger comfort. It adheres to metal, composites, and many rigid surfaces—ideal for spot repairs or continuous runs in confined locations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFirewall and bulkhead heat shielding to protect wiring and controls.\u003c\/li\u003e\n  \u003cli\u003eEngine bay covers, manifolds, and turbo proximity shielding.\u003c\/li\u003e\n  \u003cli\u003eUnder-hood and underbody patches near exhaust paths.\u003c\/li\u003e\n  \u003cli\u003eSeat bottoms and floor areas to block heat intrusion into cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperature and durability limits should I expect?\u003c\/h3\u003e\n\u003cp\u003eReflect-A-Gold is formulated to withstand continuous service at elevated temperatures and to tolerate extreme thermal cycling without rapid degradation. It resists UV exposure for longer life in exposed installations, though it should not be treated as permanent structural fastener—regular inspections in severe conditions are advised.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCapable of continual exposure up to 850°F in reflective service.\u003c\/li\u003e\n  \u003cli\u003eUV-resistant surface for outdoor and engine-bay longevity.\u003c\/li\u003e\n  \u003cli\u003eAdhesive performance remains reliable across temperature swings.\u003c\/li\u003e\n  \u003cli\u003eDesigned for removability and rework when repairs or access are needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I prepare surfaces and install the tape correctly?\u003c\/h3\u003e\n\u003cp\u003eFor best adhesion, clean surfaces free of oil, dirt, and loose corrosion; rough or porous substrates may require primer or extra pressure for full contact. Measure and cut the tape to size, remove the heat-rated release liner, press in place, and use a roller or firm hand pressure to set the bond.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean surface with solvent or alcohol and let fully dry.\u003c\/li\u003e\n  \u003cli\u003eCut to fit and remove protective release liner before application.\u003c\/li\u003e\n  \u003cli\u003eApply firm pressure or a roller to ensure full adhesive contact.\u003c\/li\u003e\n  \u003cli\u003eInspect periodically, especially near high-vibration zones.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Reflect-A-Gold is aimed at automotive technicians, race teams, custom car builders, aircraft restorers, and maintenance professionals who need a high-performance, removable thermal barrier. It suits anyone wanting to reduce radiant heat transfer to electrical components, fuel systems, interiors, or other heat-sensitive parts without adding heavy bulk or complex installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Reflect-A-Gold tolerate continuous high temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The product resists continual temperatures up to 850°F, designed for sustained high-heat environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the adhesive hold to painted or composite surfaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally yes, if surfaces are clean and dry; for porous or contaminated surfaces, prepare with solvent and press firmly for best adhesion.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67587318710457,"sku":"B0039Z5TUY","price":91.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-reflect-a-gold-front-roll.jpg?v=1790505809"},{"product_id":"design-engineering-reflect-a-gold-high-temp-adhesive-heat-shield-panel-12-x-24-in-reflective-flexible-to-850-f","title":"Design Engineering Reflect-A-Gold high-temp adhesive heat shield panel 12 x 24 in — reflective, flexible to 850°F","description":"\u003cp\u003e\u003cstrong\u003eReflect-A-Gold 12\" x 24\" is an adhesive-backed, metalized high-temperature heat shield panel engineered to reflect radiant heat and resist continuous exposure up to 850°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from a metalized polyamide polymer laminated to glass cloth with a high-temperature pressure-sensitive adhesive, this 12\" x 24\" panel from Design Engineering delivers a lightweight, flexible barrier for hot zones where protection matters. The sheet is designed for easy trimming and bonding to metal, plastic, and composite substrates, and it ships with a release liner rated for 325°F to simplify handling during installation. Suitable for automotive, motorsports, marine and industrial use, Reflect-A-Gold offers professional-grade reflectivity and durability in demanding thermal environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Reflect-A-Gold reduce radiant heat in tight spaces?\u003c\/h3\u003e\n\u003cp\u003eThe metalized surface reflects radiant energy away from components, lowering the heat load on sensitive parts without adding significant bulk. Because the product is flexible and conforms to contours, it makes close-contact installation on awkward shapes easier than rigid shields.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetalized polyamide surface reflects radiant heat effectively.\u003c\/li\u003e\n  \u003cli\u003eLaminated glass cloth adds tear resistance and structural stability.\u003c\/li\u003e\n  \u003cli\u003eThin profile preserves clearance in confined engine bays and compartments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan it stay in place under extreme temperatures and outdoor exposure?\u003c\/h3\u003e\n\u003cp\u003eYes: the high-temperature pressure-sensitive adhesive is formulated to adhere securely at elevated temperatures and to resist UV-driven degradation so the bond and appearance remain stable over time. The release liner is rated to 325°F to protect the adhesive during handling and initial heat exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdhesive rated for high-temp continuous exposure and strong bond strength.\u003c\/li\u003e\n  \u003cli\u003eUV-resistant facing retains reflective performance outdoors.\u003c\/li\u003e\n  \u003cli\u003eRelease liner simplifies peel-and-stick installation and heat endurance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts and applications are best suited for this 12\" x 24\" panel?\u003c\/h3\u003e\n\u003cp\u003eThe sheet is sized to cover medium areas or to be cut into custom shapes for specific components. Typical uses include firewall patches, seat bottoms, engine covers, bulkheads, and local patches on fuel cells or under-hood surfaces where radiant heat is concentrated.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFirewalls and bulkheads for driver\/passenger protection.\u003c\/li\u003e\n  \u003cli\u003eUnder-hood zones: manifolds, turbo housings, and engine covers.\u003c\/li\u003e\n  \u003cli\u003eMarine engine compartments and other confined hot areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you install and maintain Reflect-A-Gold panels?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: clean the surface, trim the sheet to fit, remove the release liner, and apply with firm pressure. For long-term performance, inspect the edges and re-seat or replace panels if adhesive fails or the facing becomes compromised.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean substrate of oil, dirt, and loose paint before bonding.\u003c\/li\u003e\n  \u003cli\u003eTrim with scissors or a utility knife for a custom fit.\u003c\/li\u003e\n  \u003cli\u003eApply firm pressure and allow time for adhesive set under ambient heat cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Reflect-A-Gold 12\" x 24\" is aimed at professionals and serious enthusiasts—automotive technicians, race teams, marine mechanics, and industrial maintenance crews—who need a thin, adhesive-backed radiant barrier that endures very high temperatures. If you require a field-trimmable, durable reflective shield for firewalls, engine bays, fuel cell areas, or any compact hot spot, this panel offers a practical balance of reflectivity, adhesion, and flexibility backed by Design Engineering quality.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What maximum continuous temperature can this panel withstand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Reflect-A-Gold handles continuous temperatures up to 850°F without losing reflective performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the adhesive stick to painted metal and composites?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the high-temp pressure-sensitive adhesive bonds well to metal, plastic, and composite surfaces when properly cleaned.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67588162388153,"sku":"B0039Z5TRC","price":82.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-reflect-a-gold-front-panel.jpg?v=1790516820"},{"product_id":"design-engineering-high-temp-spray-adhesive-13-3-oz-heat-resistant-200-f-fast-drying-professional-aerosol","title":"Design Engineering High-Temp Spray Adhesive 13.3 oz — Heat-Resistant 200°F, Fast-Drying Professional Aerosol","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering High-Temp Spray Adhesive 13.3 oz is a professional-grade, fast-drying aerosol adhesive engineered to form aggressive, heat-resistant bonds on foam, fabric, metal, wood, plastic, and insulation up to 200°F (94°C).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis improved-formula spray adhesive delivers consistent high tack and a precision web spray pattern to reduce overspray while covering porous and semi-porous substrates evenly. Packaged in a 13.3 oz aerosol can, it is formulated for automotive, marine, industrial, and general repair uses where heat resistance, quick cure time, and long-lasting adhesion matter. The product meets California SCAQMD Rule 1168 low-VOC requirements and is manufactured without ozone-depleting substances.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adhesive perform in high-heat areas like engine bays?\u003c\/h3\u003e\n\u003cp\u003eThe adhesive maintains bond integrity at elevated temperatures, rated for reliable performance up to 200°F (94°C). That makes it well-suited for attaching heat and sound barrier materials near exhaust components and other warm zones.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-resistant formulation rated to 200°F (94°C)\u003c\/li\u003e\n  \u003cli\u003eSuitable for engine compartments and exhaust-adjacent surfaces\u003c\/li\u003e\n  \u003cli\u003eResists softening and bond failure under sustained heat exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and materials will it stick to effectively?\u003c\/h3\u003e\n\u003cp\u003eDesigned as a multi-material bonding solution, the spray works on porous and semi-porous substrates including foam, fabric, metal, wood, plastic, and insulation products. Its aggressive, pressure-sensitive tack helps create secure bonds across mixed-material assemblies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBonds foam and upholstery fabrics used in interiors\u003c\/li\u003e\n  \u003cli\u003eAdheres to metal and painted surfaces for trim and panel work\u003c\/li\u003e\n  \u003cli\u003eSecures heat and sound deadening materials to chassis and panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast does it dry and how precise is application?\u003c\/h3\u003e\n\u003cp\u003eThe fast-drying formula sets up quickly to reduce project downtime and allow rapid handling. A precision web spray pattern produces even coverage while minimizing overspray for cleaner, more controlled application on detailed or large surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick tack and rapid drying for efficient workflow\u003c\/li\u003e\n  \u003cli\u003ePrecision web spray reduces overspray and waste\u003c\/li\u003e\n  \u003cli\u003eAerosol can offers controlled, repeatable application\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this adhesive safe and compliant for professional use?\u003c\/h3\u003e\n\u003cp\u003eManufactured to meet low-VOC standards, the formula contains no ozone-depleting substances and complies with California SCAQMD Rule 1168. It's formulated for professional installers and experienced DIY users who follow label safety and ventilation guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-VOC compliance with SCAQMD Rule 1168\u003c\/li\u003e\n  \u003cli\u003eNo ozone-depleting substances in the formulation\u003c\/li\u003e\n  \u003cli\u003eAerosol containment for cleaner jobsite use—follow safety instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 13.3 oz Design Engineering Hi-Temp Spray Adhesive suits automotive technicians, marine outfitters, sound-deadening installers, and hands-on DIYers tackling heat-exposed or multi-material bonding tasks. Choose it when you need a fast-curing, high-tack adhesive that withstands elevated temperatures, reduces overspray with a precision web pattern, and complies with low-VOC regulations for professional and workshop environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature can this spray adhesive withstand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It maintains reliable adhesion up to 200°F (94°C), suitable for many engine bay and exhaust-adjacent applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which materials does this adhesive bond to?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It bonds foam, fabric, metal, wood, plastic, and heat\/sound insulation for automotive, marine, and general repairs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67588329996473,"sku":"B006GP73EO","price":72.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-front-can.jpg?v=1790517988"},{"product_id":"design-engineering-mini-versa-shield-starter-heat-shield-wrap-5-25-x-16-5-aluminized-trim-to-fit-insulation","title":"Design Engineering Mini Versa-Shield Starter Heat Shield Wrap 5.25\" x 16.5\" — Aluminized, Trim-to-Fit Insulation","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering's Mini Versa-Shield is a trim-to-fit aluminized heat wrap that reflects radiant heat up to 2,000°F to shield starters and other under-hood parts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUnder-hood heat soak shortens component life and causes intermittent failures; the Mini Versa-Shield Starter Heat Shield Wrap gives an easy, reusable way to reduce radiant heat exposure for small starters and similarly sized parts. Built from an aluminized reflective outer layer bonded to a high-temperature glass-fiber insulation core, the wrap is sized for compact installations but can be trimmed and secured with hook-and-loop closure for a custom fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this wrap reduce starter heat soak?\u003c\/h3\u003e\n\u003cp\u003eThe aluminized outer surface reflects the majority of radiant heat away from the underlying component while the glass-fiber insulation layer slows conductive heat transfer. Together they lower the thermal load the starter sees during engine bay heat spikes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReflects radiant heat up to 2,000°F (reflective aluminized face)\u003c\/li\u003e\n  \u003cli\u003eInsulation core rated for high temperatures to reduce conducted heat\u003c\/li\u003e\n  \u003cli\u003eCompact coverage tailored for small starters and similar parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my application and how is it installed?\u003c\/h3\u003e\n\u003cp\u003eThe mini wrap measures 5.25\" x 16.5\" and is designed to be trimmed to match different starter shapes and sizes. Installation is tool-light and usually avoids component removal: simply wrap, trim, and fasten the hook-and-loop edge.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim-to-fit length for custom coverage\u003c\/li\u003e\n  \u003cli\u003eHook-and-loop edges allow quick, secure closure\u003c\/li\u003e\n  \u003cli\u003eIn most cases no starter removal is required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat other parts can the Versa-Shield protect?\u003c\/h3\u003e\n\u003cp\u003eThough optimized for starters, the Mini Versa-Shield is versatile enough for various heat-sensitive under-hood parts. Use it wherever radiant heat or concentrated exhaust heat risks premature wear or intermittent operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaster cylinders and fuel pumps near exhaust components\u003c\/li\u003e\n  \u003cli\u003eDistributors and cool cans or small electrical modules\u003c\/li\u003e\n  \u003cli\u003eAny compact component exposed to elevated under-hood temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable is the heat wrap?\u003c\/h3\u003e\n\u003cp\u003eThe wrap combines an aluminized outer face with a high-temp glass fiber backing for long-lasting performance under repeated thermal cycles. It can be removed for inspection and reinstalled, and its hook-and-loop closure keeps maintenance fast.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminized surface resists radiant heat degradation\u003c\/li\u003e\n  \u003cli\u003eGlass fiber insulation maintains thermal integrity at high temperatures\u003c\/li\u003e\n  \u003cli\u003eReusable hook-and-loop system for service access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Design Engineering Mini Versa-Shield is aimed at mechanics, restorers, and DIY vehicle owners who need a compact, adjustable thermal barrier to protect starters and nearby under-hood parts. It's particularly useful for hot-rodders, turbo or header-equipped engines, and any application where localized radiant heat threatens electrical or mechanical reliability. If you want a fast, trim-to-fit heat protection solution that installs without major teardown, this wrap offers an affordable and practical option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I trim the Mini Versa-Shield to fit different starters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 5.25\" x 16.5\" wrap is designed to be trimmed for custom fits and secured with its hook-and-loop edge.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require removing the starter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: In most cases no. The hook-and-loop closure lets you wrap and secure the part without removing the starter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67588489412793,"sku":"B01GIL1O22","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-mini-versa-shield-front-packaging.jpg?v=1790519293"},{"product_id":"design-engineering-heat-shroud-wrap-around-thermal-sleeve-1-2-1-1-4-i-d-3-ft-aluminized-high-temp-fiberglass","title":"Design Engineering Heat Shroud wrap-around thermal sleeve 1\/2\"–1-1\/4\" I.D., 3 ft — aluminized, high-temp fiberglass","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering Heat Shroud™ is a 3-foot, aluminized fiberglass sleeve that wraps around hoses, lines, and wires to reflect radiant heat and prevent abrasion without disconnecting components.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt for automotive, racing, and industrial use, this Heat Shroud combines 19 oz high-temperature fiberglass insulation with a robust aluminized outer layer and aramid-reinforced stitching. The result is a flexible, wrap-around thermal barrier that reflects intense radiant heat (up to 2000°F), resists chafing, and installs quickly with a hook-and-loop closure. Because it installs without cutting or disconnecting lines, it saves time during maintenance and protects critical components in tight engine bays, exhaust paths, and machinery enclosures.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this heat shroud protect hoses and wiring?\u003c\/h3\u003e\n\u003cp\u003eThe Heat Shroud reduces heat transfer primarily by reflecting radiant heat and providing an insulating layer between heat sources and your components. Its aluminized face throws back high temperatures while the fiberglass core limits conductive heat flow, keeping hoses and wires cooler and more flexible under thermal stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReflects radiant heat up to 2000°F with aluminized outer layer\u003c\/li\u003e\n  \u003cli\u003e19 oz high-temp fiberglass core for thermal insulation\u003c\/li\u003e\n  \u003cli\u003eAramid-reinforced stitching resists abrasion and tear\u003c\/li\u003e\n  \u003cli\u003eMaintains flexibility for bends and tight routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install the shroud without disconnecting lines?\u003c\/h3\u003e\n\u003cp\u003eYes — the wrap-and-seal hook-and-loop design lets you install the shroud around existing hoses, cables, and intakes. Simply measure, cut to length if needed, wrap the sleeve around the component, and secure the closure; no tools or component removal are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHook-and-loop closure for tool-free installation\u003c\/li\u003e\n  \u003cli\u003eCut-to-length design for custom runs and tight spaces\u003c\/li\u003e\n  \u003cli\u003eFits 1\/2\" to 1-1\/4\" I.D. natively; flexible for slightly larger sizes\u003c\/li\u003e\n  \u003cli\u003eWorks on straight runs, bends, and junctions without disconnecting lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat environments and stresses is the shroud designed for?\u003c\/h3\u003e\n\u003cp\u003eThis shroud was made to handle demanding automotive and industrial conditions where heat, vibration, and abrasion combine to shorten component life. It is flame-retardant, resists chafing from contact points, and stands up to repeated flexing and exposure in engine bays, near exhausts, or in racing applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngine bays, turbo and exhaust proximity protection\u003c\/li\u003e\n  \u003cli\u003eRacing and performance applications under high thermal loads\u003c\/li\u003e\n  \u003cli\u003eIndustrial machinery where abrasion and radiant heat are present\u003c\/li\u003e\n  \u003cli\u003eDurable construction for long-term service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose size and cut the shroud for a custom fit?\u003c\/h3\u003e\n\u003cp\u003eSelect the sleeve close to the internal diameter of the hose or line you need to protect; this 3-foot length covers runs and can be trimmed where necessary. Use sharp scissors to cleanly cut the shroud to length, then overlap and secure with the hook-and-loop closure for a snug fit that preserves protection at joints and bends.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3 ft standard length — trim to fit with scissors\u003c\/li\u003e\n  \u003cli\u003eDesigned for hoses 1\/2\"–1-1\/4\" I.D., flexible for nearby sizes\u003c\/li\u003e\n  \u003cli\u003eOverlap at joints for continuous protection\u003c\/li\u003e\n  \u003cli\u003eAvoid compressing the insulation at tight clamps for best thermal performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technicians, mechanics, racers, and industrial maintenance teams who need a quick, reliable way to shield hoses, lines, and wiring from extreme heat and abrasion will benefit from this product. If you want a reusable, adjustable thermal barrier that installs without dismantling systems and delivers professional-grade protection, the Design Engineering Heat Shroud™ offers a practical solution. Proudly made in the USA for demanding environments where durability and easy installation matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the shroud fit hoses larger than 1-1\/4\" I.D.?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s designed for 1\/2\"–1-1\/4\" I.D. but its flexible construction can accommodate slightly larger hoses when overlapped properly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the Heat Shroud without tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hook-and-loop closure allows tool-free installation; just cut to length, wrap, and secure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67589797806265,"sku":"B000E267JC","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-heat-shroud-front-view.jpg?v=1790532078"},{"product_id":"design-engineering-heat-sheath-aluminized-sleeving-1-1-4-i-d-x-3-ft-reflective-thermal-abrasion-barrier","title":"Design Engineering Heat Sheath Aluminized Sleeving — 1-1\/4\" I.D. x 3 ft, Reflective Thermal \u0026 Abrasion Barrier","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering Heat Sheath™ Aluminized Sleeving is a slip-on thermal and abrasion barrier—1-1\/4\" I.D. by 3 ft—built to reflect radiant heat and shield hoses, wires, and fluid lines in high-temperature environments.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen engine bays, exhaust tunnels, or industrial machines expose lines to intense heat, friction, oil, and road debris, a rugged shielding solution prevents premature failures and downtime. This sleeving combines a 19 oz high-temperature fiberglass core with a bonded aluminized outer layer and aramid-reinforced stitching to deliver durable thermal reflection, abrasion resistance, and chemical protection. It installs easily by slipping over the line after disconnecting and can be trimmed to fit custom routing—made in the USA for quality assurance. Note: do not apply Heat Sheath directly to exhaust components.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sleeving reduce heat transfer to hoses and cables?\u003c\/h3\u003e\n\u003cp\u003eThe aluminized outer layer reflects radiant heat, lowering the thermal load on covered components. The fiberglass insulation underneath handles sustained temperatures while the sleeving resists direct-contact heat up to 500°F.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReflects radiant heat up to 2000°F.\u003c\/li\u003e\n  \u003cli\u003eWithstands direct heat exposure to 500°F.\u003c\/li\u003e\n  \u003cli\u003e19 oz high-temperature fiberglass insulation for thermal buffering.\u003c\/li\u003e\n  \u003cli\u003eAluminized finish deflects radiant energy away from lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this protect lines from abrasion, chemicals, and road debris?\u003c\/h3\u003e\n\u003cp\u003eYes—Heat Sheath is engineered for abrasion resistance and chemical tolerance so it shields hoses and wires from rubbing, oil, fuel, dirt, and grime. Aramid fiber thread reinforces seams to reduce wear at connection points and along routed sections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced with aramid fiber thread for tear and abrasion resistance.\u003c\/li\u003e\n  \u003cli\u003eOuter aluminized layer repels oil, grease, and many chemicals.\u003c\/li\u003e\n  \u003cli\u003eDurable finish resists road debris and mechanical scuffing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what sizes are available?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: disconnect the line or hose, cut the sleeving to the desired length, slide it on, and reattach the component. This listing is for a 1-1\/4\" inside diameter, 3 ft length piece suitable for many common automotive and industrial lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip-on design—no special tools required.\u003c\/li\u003e\n  \u003cli\u003eTrim-to-fit length for custom routing.\u003c\/li\u003e\n  \u003cli\u003e1-1\/4\" I.D. × 3 ft length fits typical medium-diameter hoses and cables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this safe for use around engines and in industrial settings?\u003c\/h3\u003e\n\u003cp\u003eDesigned for demanding environments, Heat Sheath resists flames and prolonged heat while protecting components from contaminants commonly found in engine bays and equipment rooms. It is not intended for direct contact with exhaust manifolds or turbo components—avoid applying it directly to exhaust surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFire-retardant fiberglass core and aluminized outer layer.\u003c\/li\u003e\n  \u003cli\u003eMade in the USA to meet quality and consistency standards.\u003c\/li\u003e\n  \u003cli\u003eNot for direct application to exhaust components; use as protective coverage for nearby lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Mechanics, fabricators, fleet operators, and DIY enthusiasts who need a reliable, easy-to-install thermal and abrasion barrier for fuel lines, hoses, wiring harnesses, and fluid lines will find Heat Sheath ideal. Choose this 1-1\/4\" I.D. × 3 ft sleeving when you need a high-temperature reflective shield that resists oil, chemicals, and physical wear while keeping components cooler and extending service life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Heat Sheath directly on exhaust manifolds or turbo housings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Do not apply this sleeving directly to exhaust components; it protects nearby lines but isn’t rated for direct exhaust contact.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I install the 1-1\/4\" I.D. × 3 ft sleeving?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Disconnect the line, cut the sleeving to length, slide it over the hose or cable, then reinstall the connection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67591222984889,"sku":"B000E28EFC","price":65.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-heat-sheath-front-packaging.jpg?v=1790544228"},{"product_id":"design-engineering-aluminized-heat-sheath-sleeving-1-1-2-i-d-x-3-ft-19-oz-fiberglass-reflects-to-2000-f","title":"Design Engineering Aluminized Heat Sheath Sleeving — 1-1\/2\" I.D. x 3 ft, 19 oz Fiberglass, Reflects to 2000°F","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering Heat Sheath Aluminized Sleeving is a slip-on, heavy-duty thermal and abrasion barrier that reflects intense radiant heat and protects hoses, wires, and fluid lines in extreme automotive and industrial environments.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 19 oz high-temperature fiberglass insulation fused to an aluminized outer face and stitched with aramid thread, this sleeving balances radiant heat reflection with mechanical durability. It’s engineered to reflect radiant temperatures up to 2000°F while tolerating direct contact heat up to 500°F, and is treated to resist oils, fuels, chemicals, dirt, and road contaminants. The 1-1\/2\" inner diameter and 3-foot length suit a range of hose and cable runs; installation is straightforward because the material is designed to be slipped over lines after disconnecting and then trimmed to length.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sleeving reduce heat exposure to hoses and wiring?\u003c\/h3\u003e\n\u003cp\u003eThe aluminized surface bounces radiant heat away from the protected component, while the dense fiberglass core slows heat transfer by conduction. Together, they lower the thermal load on hoses and cables, helping preserve fittings, seals, and insulation under high-temperature conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReflects radiant heat up to 2000°F while resisting direct surface temperatures to 500°F.\u003c\/li\u003e\n  \u003cli\u003e19 oz fiberglass core reduces conductive heat transfer to lines.\u003c\/li\u003e\n  \u003cli\u003eAluminized outer layer deflects radiant sources like headers and exhaust proximity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it stand up to abrasion, chemicals, and road grime?\u003c\/h3\u003e\n\u003cp\u003eYes—this product combines a tough outer aluminized face with aramid-reinforced stitching to resist wear from chafing and debris. It’s also formulated to withstand common automotive fluids and contaminants, extending component life where abrasion and exposure are concerns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAramid fiber thread provides high tensile strength and cut resistance at seams.\u003c\/li\u003e\n  \u003cli\u003eOuter finish repels oil, fuel, grease, and dirt for easier maintenance.\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist scuffing from road debris and contact with nearby hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and sizing for my application?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intentionally simple: disconnect the line or hose, slide the sleeving on, trim to the needed length, and reconnect. The 1-1\/2\" I.D. fits many common hoses and cable bundles; the 3-foot length can be cut down to suit short runs or joined for longer protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip-on application—no adhesives or specialized tools required.\u003c\/li\u003e\n  \u003cli\u003eCut-to-length flexibility for custom routing and repairs.\u003c\/li\u003e\n  \u003cli\u003eCan be used alone or in combination with clamps or ties to secure in place.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there safety limits or installation cautions I should know?\u003c\/h3\u003e\n\u003cp\u003eWhile robust, the sleeving is not intended to be wrapped directly onto active exhaust surfaces or components exceeding the direct-contact temperature rating. Keep it spaced or shielded from direct exhaust contact and follow standard safety practices when routing near moving parts or sharp edges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not apply directly to exhaust manifold, tailpipe, or other direct-exhaust surfaces.\u003c\/li\u003e\n  \u003cli\u003eUse clamps, standoffs, or heat-resistant fasteners to maintain clearance when needed.\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for damage and replace if charred, cut, or compromised.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, fabricators, performance tuners, fleet maintenance crews, and industrial engineers who need a reliable, easy-to-install barrier against heat and abrasion. Design Engineering Heat Sheath is suited to automotive engine bays, insulated fluid lines, wiring harness protection, and industrial piping where radiant heat and mechanical wear threaten component life. Produced in the USA and built for repeated exposure, it offers a practical solution for extending service intervals and reducing heat-related failures when used according to specified temperature limits.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What maximum temperatures can the sleeving withstand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Reflective aluminized face handles radiant heat up to 2000°F; direct-contact resistance is rated to 500°F.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Slip over the disconnected line, cut to length, and reinstall—no special tools required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67591910981817,"sku":"B001HYSCB2","price":62.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-heat-sheath-front-packaging_7949f29b-1070-45e3-af6b-4ba0d1023f3d.jpg?v=1790559926"},{"product_id":"design-engineering-high-temp-silicone-coating-spray-12-oz-1200-f-heat-resistant-flexible-sealant","title":"Design Engineering High-Temp Silicone Coating Spray 12 oz — 1200°F Heat-Resistant Flexible Sealant","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering High-Temperature Silicone Coating Spray is a high-heat silicone sealant aerosol that protects exhaust wraps and hot metal surfaces by sealing out oil, dirt, abrasion and moisture while resisting heat up to 1200°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aerosol coating is formulated to preserve the integrity of heat-management materials and hot components that face extreme thermal stress. It penetrates and bonds with exhaust wraps and exposed metal, forming a flexible, durable barrier that resists cracking, peeling, and contamination. The 12 oz can cures with a controlled heat cycle to produce a resilient finish that helps keeps engine bays cleaner and wraps effective longer.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this spray protect exhaust wraps under repeated heat cycles?\u003c\/h3\u003e\n\u003cp\u003eThe silicone-based formula soaks into the fibrous surface and cures into a cohesive coating that reduces fiber degradation and surface contamination. That helps the wrap retain insulating properties and mechanical strength across many thermal cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone formula penetrates and seals fibers to limit fraying and particle loss\u003c\/li\u003e\n  \u003cli\u003eFlexible cured film resists cracking during expansion and contraction\u003c\/li\u003e\n  \u003cli\u003eReduces oil and grime adhesion that can accelerate wear\u003c\/li\u003e\n  \u003cli\u003eRecommended application: at least three coats with heat curing between coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperature and curing process should I expect when using it?\u003c\/h3\u003e\n\u003cp\u003eThis coating is designed to withstand continuous exposure to temperatures up to 1200°F when fully cured. The typical cure schedule uses a staged heating approach so the silicone cross-links and bonds to the wrap and metal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpray in light, even passes to avoid runs and ensure penetration\u003c\/li\u003e\n  \u003cli\u003eCures at approximately 400°F; allow about two hours at temperature per manufacturer guidance\u003c\/li\u003e\n  \u003cli\u003eApply multiple coats with a heat cycle between each coat for best durability\u003c\/li\u003e\n  \u003cli\u003eUse in well-ventilated area and follow safety instructions on the can\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich surfaces and applications are best suited for this product?\u003c\/h3\u003e\n\u003cp\u003eWhile optimized for Design Engineering exhaust wraps, this silicone coating also bonds to many hot metal surfaces commonly found in automotive and industrial contexts. It serves as a protective topcoat for headers, manifolds, engine components, and other areas exposed to heat, dirt, and abrasion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for wrapped headers, engine blocks, exhaust pipes, and manifolds\u003c\/li\u003e\n  \u003cli\u003eWorks on lightly prepared metal surfaces to reduce corrosion and grime buildup\u003c\/li\u003e\n  \u003cli\u003eCompatible with other DEI heat-management products for system protection\u003c\/li\u003e\n  \u003cli\u003eHelps maintain a cleaner engine bay by repelling oil and dust\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This High-Temp Silicone Coating Spray is aimed at automotive professionals, motorsport teams, restoration shops, and DIY enthusiasts who want to extend the life and performance of exhaust wraps and hot components. If you install or maintain heat management systems and need a durable, heat-resistant sealant to reduce contamination and mechanical wear, this aerosol offers an accessible, field-service-friendly solution. Always follow the product label for surface preparation, application technique, and safety precautions to achieve optimum results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this spray safe for use on all exhaust wraps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it's formulated for Design Engineering wraps and many other heat-resistant wraps; always test on a small area and follow cure instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many coats and what cure time are recommended?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Apply at least three light coats, allowing a heat cycle (about two hours at 400°F) between coats for full cure and durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67591916355769,"sku":"B000MY3ML8","price":58.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-high-temp-spray-front-can.jpg?v=1790560025"},{"product_id":"design-engineering-high-temp-aluminum-silicone-coating-spray-12-oz-aerosol-1200-f-heat-resistant-flexible-protective-sealant","title":"Design Engineering High-Temp Aluminum Silicone Coating Spray — 12 oz Aerosol, 1200°F Heat-Resistant, Flexible Protective Sealant","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering High-Temperature Aluminum Silicone Coating Spray is a high-adhesion, heat-resistant sealant engineered to protect exhaust wraps and hot metal surfaces, rated for continuous use up to 1200°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aerosol silicone coating forms a durable, flexible aluminum-finish barrier that resists oil, grime, and abrasion while improving the longevity of heat-resistant wraps and hot components. The formula bonds tightly to both fibrous wraps and metal substrates, cures quickly with heat cycles, and is designed to reduce maintenance and replacement frequency for automotive, racing, and industrial applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coating protect exhaust wraps and hot surfaces?\u003c\/h3\u003e\n\u003cp\u003eThe silicone coating soaks into wrap fibers and creates a sealed top layer on metal, blocking contaminants that can break down materials over time. Its aluminum-silicone composition reflects heat and helps retain the wrap’s insulating properties while resisting wear from road debris and fluids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePenetrates and seals fibrous wraps to prevent dirt and oil penetration\u003c\/li\u003e\n  \u003cli\u003eForms a flexible, abrasion-resistant outer film on metal parts\u003c\/li\u003e\n  \u003cli\u003eAluminum finish helps reflect radiant heat and improve thermal performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperatures and curing steps should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe product is engineered for continuous exposure at elevated temperatures up to 1200°F and tolerates higher short-term spikes typical in exhaust systems. Proper application and curing through heat cycles are essential to achieve full durability and adhesion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for continuous use up to 1200°F; tolerates higher transient heat\u003c\/li\u003e\n  \u003cli\u003e12 oz. aerosol can — apply at least three coats for best results\u003c\/li\u003e\n  \u003cli\u003eCures at approximately 400°F within two hours; allow a heat cycle between coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply the spray for consistent, long-lasting results?\u003c\/h3\u003e\n\u003cp\u003eSurface prep and multiple thin coats are key: clean and degrease surfaces first, then spray evenly with light passes to avoid runs. Allowing a heating cycle between coats promotes full cure and maximizes abrasion resistance and adhesion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean and dry surface of oil, dirt, and loose particles before spraying\u003c\/li\u003e\n  \u003cli\u003eApply several light coats rather than one heavy coat; maintain 6–8 inches distance\u003c\/li\u003e\n  \u003cli\u003eHeat briefly between coats and perform final cure at recommended temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work on components beyond exhaust wraps?\u003c\/h3\u003e\n\u003cp\u003eYes — the coating adheres to various metal surfaces like headers, manifolds, starters, and grills to protect against grime and abrasion while helping preserve thermal behavior. It’s formulated to complement Design Engineering wraps but is compatible with many heat-exposed parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for headers, engine blocks, manifolds, and other hot metal parts\u003c\/li\u003e\n  \u003cli\u003eHelps shield parts from corrosive fluids and road contaminants\u003c\/li\u003e\n  \u003cli\u003eCan extend service life of both wraps and underlying components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This spray is intended for mechanics, motorsport teams, vehicle enthusiasts, fabricators, and maintenance professionals who need a reliable, high-temperature protective coating for exhaust systems and hot metal components. It’s especially useful when combined with Design Engineering exhaust wraps to reduce replacement frequency and maintain thermal performance in demanding environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this safe for use on all exhaust wrap materials?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; formulated to penetrate and seal common fibrous wraps. Test a small area first for optimal compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many coats and how long to cure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Apply at least three light coats with a heat cycle between coats; final cure occurs around 400°F in about two hours.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67591919206585,"sku":"B000MY1RB0","price":58.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-front-can-aluminum-finish.jpg?v=1790560068"},{"product_id":"design-engineering-spray-on-sound-deadener-18-oz-aerosol-paintable-moisture-resistant-damping","title":"Design Engineering Spray-On Sound Deadener — 18 oz aerosol, paintable \u0026 moisture‑resistant damping","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering Boom Mat Spray-On Sound Deadener is an 18 oz aerosol that sprays a thin, paintable layer to reduce road and engine noise, rattles, and panel vibration in hard-to-reach vehicle areas.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen traditional peel-and-stick mats won't fit, a sprayable dampener makes sound control practical. This fast-drying aerosol covers up to 20 sq. ft., adheres to irregular surfaces, and forms a moisture-resistant coating that can be painted after roughly six hours—helpful for restorations, custom builds, and anywhere you want quieter, more solid-feeling panels.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this product reduce noise and vibration?\u003c\/h3\u003e\n\u003cp\u003eThe formula bonds to metal and many interior substrates, adding mass and damping properties that dissipate vibrational energy. Instead of transferring panel flex into audible noise, the treated surface absorbs and converts that energy, making the cabin quieter and reducing annoying rattles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates a uniform damping layer across seams and curves.\u003c\/li\u003e\n  \u003cli\u003eCan be applied in multiple thin coats for targeted performance.\u003c\/li\u003e\n  \u003cli\u003eImproves mid- and low-frequency noise control compared with untreated metal.\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize loose panels to reduce clatter and squeaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere should I spray it on my vehicle?\u003c\/h3\u003e\n\u003cp\u003eSpray-On Boom Mat is designed for areas that are awkward or impossible to fit with sheet products. Use it inside trunks, along door inner panels, fender wells, rear quarters, undercarriages, and wherever contours or obstacles prevent adhesive mats from laying flat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrunk interiors and rear quarters to quiet road and cargo noise.\u003c\/li\u003e\n  \u003cli\u003eDoor panels and inner skins for cleaner audio and fewer rattles.\u003c\/li\u003e\n  \u003cli\u003eFender wells and engine bay-adjacent panels to reduce drivetrain noise.\u003c\/li\u003e\n  \u003cli\u003eUndercarriage spots that need rust-sealing plus damping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does it take to dry and can it be painted?\u003c\/h3\u003e\n\u003cp\u003eSurface tack-free time is quick, and the product reaches a paintable state in about six hours under typical shop conditions. Full cure and peak mechanical performance take longer, so follow recommended layering and drying intervals when building thickness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePaintable after approximately 6 hours depending on temperature and humidity.\u003c\/li\u003e\n  \u003cli\u003eApply thin, even coats and allow each layer to dry before reapplying.\u003c\/li\u003e\n  \u003cli\u003eAvoid heavy wet coats that prolong drying and reduce adhesion.\u003c\/li\u003e\n  \u003cli\u003eGood ventilation and moderate temperatures speed cure times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this easy to apply and how much area will one can cover?\u003c\/h3\u003e\n\u003cp\u003eYes—application is straightforward with the aerosol format: shake, spray, and build thin layers. One 18 oz can covers up to about 20 square feet when applied as recommended, making it efficient for spot treatments or partial-area projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAerosol delivers consistent mist for irregular contours and cavities.\u003c\/li\u003e\n  \u003cli\u003eUse multiple light passes rather than one heavy coat for best results.\u003c\/li\u003e\n  \u003cli\u003eCoverage estimates based on typical 8–12 mil total thickness in treated zones.\u003c\/li\u003e\n  \u003cli\u003eOne can is sufficient for focused areas like doors, trunk lids, or fender wells.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Design Engineering Boom Mat Spray-On Sound Deadener is aimed at DIY restorers, car-audio installers, classic-car owners, custom builders, and mechanics who need a sprayable, paintable damping solution for irregular or hard-to-reach surfaces. It suits anyone who wants to cut road and panel noise without wrestling with mats or padding—especially when corrosion resistance and the ability to paint over the finish are important.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Boom Mat on painted surfaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it bonds best to clean, sound substrates; paintable after about six hours, but test adhesion on existing finishes first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does one 18 oz can cover an entire car door?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typically no; one can covers up to ~20 sq. ft., so one can will treat one door skin or a portion of a trunk or fender.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67592533573817,"sku":"B001URKV0G","price":60.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-boom-mat-front-can.jpg?v=1790565282"},{"product_id":"design-engineering-heat-sheath-aluminized-fiberglass-sleeving-1-2-i-d-x-3-ft-reflects-heat-to-2000-f-abrasion-resistant","title":"Design Engineering Heat Sheath Aluminized Fiberglass Sleeving 1\/2\" I.D. x 3 ft — Reflects Heat to 2000°F, Abrasion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering Heat Sheath is a 1\/2\" I.D. x 3 ft aluminized fiberglass sleeving that reflects radiant heat up to 2000°F and provides heavy-duty abrasion and chemical protection for hoses, wires and fluid lines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you run wiring, fuel lines, brake hoses or other service lines near high-heat zones in automotive or industrial equipment, this sleeving adds a tough barrier that lowers heat transfer and resists wear. Built from 19 oz high-temperature fiberglass insulation bonded to an aluminized outer layer and stitched with aramid fiber thread, the Heat Sheath is engineered to reflect intense radiant heat while still remaining flexible for routing. It resists oil, fuel, chemicals, dirt and road debris so components stay cleaner and last longer. Designed for slip-on fitment, this 3-foot length with a 1\/2\" inner diameter is a practical retrofit or repair piece for engines, exhaust-adjacent plumbing, turbo piping areas (not to be applied directly to exhaust components), and other hostile environments. Made in the USA.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Heat Sheath reduce heat exposure for nearby lines?\u003c\/h3\u003e\n\n\u003cp\u003eHeat Sheath uses a reflective aluminum outer layer plus dense fiberglass insulation to cut radiant heat transfer and lower surface temperatures on protected components. It’s sized to slip over hoses and wires so the sleeving forms a continuous barrier against radiant and convective heat sources.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReflects radiant heat up to 2000°F with aluminized surface\u003c\/li\u003e\n  \u003cli\u003eFiberglass insulation endures direct heat up to 500°F\u003c\/li\u003e\n  \u003cli\u003eContinuous slip-on coverage minimizes hot spots\u003c\/li\u003e\n  \u003cli\u003eFlexible enough to follow bends and routing paths\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of physical damage and contaminants does it block?\u003c\/h3\u003e\n\n\u003cp\u003eThe outer aluminized layer and aramid-reinforced stitching provide high abrasion resistance while the fiberglass core resists melt and flame. The construction also repels oil, fuel, grease, road grime and many common chemicals, keeping lines functional and reducing maintenance needs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty abrasion resistance from aramid thread reinforcement\u003c\/li\u003e\n  \u003cli\u003eShields against oil, fuel and road debris exposure\u003c\/li\u003e\n  \u003cli\u003eFlame-retardant performance for added safety margin\u003c\/li\u003e\n  \u003cli\u003eDurable construction meant for long-term service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are required?\u003c\/h3\u003e\n\n\u0026gt; \u003cp\u003eInstallation is straightforward: disconnect or loosen the line where possible, cut the sleeving to the required length, slide it over the component and reattach hardware. No special tools are necessary, though hose clamps or tape may be used to secure ends where needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSlip-on design—no glue, bonding or adhesives required\u003c\/li\u003e\n  \u003cli\u003eCut-to-length with a utility knife or shears for custom fit\u003c\/li\u003e\n  \u003cli\u003eSecure with clamps, ties, or high-temp tape at termination points\u003c\/li\u003e\n  \u003cli\u003eWorks on hoses, wiring bundles, brake and fuel lines, and fluid lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety or usage limits should I be aware of?\u003c\/h3\u003e\n\n\u003cp\u003eHeat Sheath is built to withstand radiant heat and protect components, but it is not intended to be in direct contact with active exhaust manifolds or pipes. Maintain clearance from direct flame contact and observe manufacturer guidance when routing near very high temperature sources.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDo not apply directly to exhaust components or open flames\u003c\/li\u003e\n  \u003cli\u003eRated for radiant reflection to 2000°F, direct exposure up to 500°F\u003c\/li\u003e\n  \u003cli\u003eCheck clearances around turbochargers and manifolds\u003c\/li\u003e\n  \u003cli\u003eRegularly inspect sleeving for cuts, compression or abrasion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Design Engineering Heat Sheath is suited to mechanics, custom fabricators, motorsport teams, fleet maintenance crews and DIY enthusiasts who need a reliable, flexible thermal barrier for hoses, wiring and fluid lines. Choose this sleeving when you want durable abrasion resistance, chemical protection and a slip-on installation that fits common hose diameters without complicated tools. It’s a practical upgrade for engine bays, turbo installations, routing behind headers (with proper clearance), and industrial machinery where radiant heat, oil and debris threaten component life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Heat Sheath be used directly on exhaust manifolds?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Do not apply directly to exhaust components; it resists radiant heat but isn’t rated for direct contact with active exhaust surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I secure the sleeving after sliding it over a hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Cut to length, slide on, then fasten ends with clamps, high-temp tape, or zip-ties rated for the application.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67592816558265,"sku":"B000CEM3M2","price":57.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-front-view-packaging.jpg?v=1790568420"},{"product_id":"design-engineering-heat-sheath-aluminized-sleeving-1-i-d-x-3-ft-reflective-thermal-barrier-abrasion-resistant","title":"Design Engineering Heat Sheath aluminized sleeving 1\" I.D. x 3 ft — reflective thermal barrier, abrasion-resistant","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering Heat Sheath Aluminized Sleeving is a slip-on thermal and abrasion barrier that reflects intense radiant heat and shields hoses, cables, and fluid lines from heat, oils, and road debris.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for automotive and industrial environments, this 1\" I.D. x 3 ft sleeving combines a 19 oz high-temperature fiberglass core with a durable aluminized outer layer and aramid-reinforced stitching. The result is a flexible protective sleeve that reflects radiant heat up to 2000°F and tolerates direct contact up to 500°F, while resisting abrasion, chemicals, grease, and grime. It installs quickly by slipping over disconnected lines and cutting to length—no specialty tools required. Proudly made in the USA, the Heat Sheath is designed to extend component life without adding rigidity or bulk.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Heat Sheath lower operating temperatures for nearby lines?\u003c\/h3\u003e\n\n\u003cp\u003eThe aluminized outer surface reflects radiant heat away from the sleeved component, reducing heat soak and keeping fluid and electrical lines cooler. The fiberglass insulation traps residual heat and slows conduction, helping maintain safer operating temperatures in crowded engine bays and hot industrial zones.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReflects radiant heat up to 2000°F to reduce heat transfer.\u003c\/li\u003e\n  \u003cli\u003eFiberglass insulation minimizes conductive heat soak.\u003c\/li\u003e\n  \u003cli\u003eMaintains flexibility so lines remain serviceable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sleeving protect wires and hoses from abrasion and contaminants?\u003c\/h3\u003e\n\n\u003cp\u003eYes—Heat Sheath’s heavy-duty fiberglass core and aramid-reinforced stitching provide excellent resistance to rubbing, chafing, and tearing. The aluminized exterior also sheds oil, fuel, chemicals, dirt, and road grime, keeping critical lines cleaner and lowering the risk of premature failure from exposure.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAramid thread reinforcement improves seam and wear strength.\u003c\/li\u003e\n  \u003cli\u003eSurface resists oil, fuel, chemicals, and grime accumulation.\u003c\/li\u003e\n  \u003cli\u003eDurable construction reduces abrasion-related damage over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and size for custom runs?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: disconnect the line or hose, slide the sleeving over, cut to length, and reinstall. The 1\" I.D. size fits common hoses and cable bundles, and the material trims cleanly so you can create custom lengths for routing or repairs without special tools.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSlip-on design—no heat gun or adhesives needed.\u003c\/li\u003e\n  \u003cli\u003eCut-to-fit with standard cutters or shears for custom lengths.\u003c\/li\u003e\n  \u003cli\u003eFlexible material maintains bend radius around fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any installation or safety considerations I should know?\u003c\/h3\u003e\n\n\u003cp\u003eDo not apply the sleeving directly against exhaust manifolds or other surfaces that exceed its direct-heat tolerance. While the aluminized layer reflects extreme radiant heat, direct contact temperatures above 500°F can compromise the sleeve. Always allow sufficient clearance and avoid pinching the material at connection points.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDo not install directly on exhaust components or turbo housings.\u003c\/li\u003e\n  \u003cli\u003eMaintain clearance from surfaces exceeding 500°F direct contact.\u003c\/li\u003e\n  \u003cli\u003eSecure ends with clamps or high-temp ties to prevent migration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Design Engineering Heat Sheath Aluminized Sleeving is ideal for mechanics, fabricators, performance tuners, fleet maintenance teams, and industrial technicians who need durable heat and abrasion protection for hoses, fuel and brake lines, wiring harnesses, and fluid lines. If you work on turbocharged engines, close-pack wiring runs, or any application where radiant heat and road contaminants shorten component life, this sleeving delivers a practical, easy-to-install solution that preserves flexibility while improving reliability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Heat Sheath be used directly on exhaust manifolds?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Do not apply directly to exhaust components; Heat Sheath withstands direct heat up to 500°F and reflects radiant heat but should not contact surfaces hotter than its rating.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I install the sleeving on existing lines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Disconnect the line, slide the sleeving on, cut to length, and reinstall. Secure ends with high-temp ties or clamps to prevent movement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67592816656569,"sku":"B001HYZYD6","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-heat-sheath-front-packaging_0e201b6a-287c-4b84-810b-ccf2e02ce82d.jpg?v=1790568418"},{"product_id":"design-engineering-heat-sheath-aluminized-sleeving-3-4-i-d-x-3-ft-reflects-heat-to-2000-f-abrasion-chemical-resistant","title":"Design Engineering Heat Sheath Aluminized Sleeving 3\/4\" I.D. x 3 ft — Reflects Heat to 2000°F, Abrasion \u0026 Chemical Resistant","description":"\u003cp\u003e\u003cstrong\u003eDesign Engineering Heat Sheath™ aluminized sleeving is a slip-on, heavy-duty thermal shield that reflects intense radiant heat and defends hoses, wires, and fluid lines from abrasion and contaminants.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 19 oz high-temperature fiberglass insulation laminated to an aluminized outer layer and stitched with aramid thread, this 3\/4\" I.D. x 3 ft sleeving helps preserve critical vehicle and machine lines in high-heat, dirty, and abrasive environments. It reflects radiant heat up to 2000°F and resists direct contact heat up to 500°F while offering splash and abrasion protection against oil, fuel, chemicals, dirt, grease, and road debris. The sleeving is designed for simple slip-on installation and is manufactured in the USA. Note: do not wrap the Heat Sheath directly onto exhaust headers or pipes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Heat Sheath protect hoses and wiring from heat?\u003c\/h3\u003e\n\u003cp\u003eThe aluminized outer layer reflects radiant heat away from the covered component, reducing thermal load on hoses and wires. The fiberglass core provides insulating mass that slows heat transfer from hot surroundings, and aramid stitching maintains structural integrity under stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReflects radiant heat up to 2000°F for reduced surface heating\u003c\/li\u003e\n  \u003cli\u003eWithstands direct contact heat up to 500°F without degrading\u003c\/li\u003e\n  \u003cli\u003e19 oz fiberglass core provides durable thermal insulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sleeving resist abrasion, oil, and chemical exposure?\u003c\/h3\u003e\n\u003cp\u003eYes — the Heat Sheath combines a tough aluminized outer skin with high-strength aramid thread and a dense fiberglass core to stand up to friction and contaminants. It serves as a barrier against mechanical wear and common automotive fluids, extending the service life of covered lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced aramid stitching for tear and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eAluminized surface repels oil, grease, and many chemicals\u003c\/li\u003e\n  \u003cli\u003eProtects against road debris and mechanical chafing in harsh conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install on existing hoses and lines?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: disconnect the line if needed, cut the sleeving to length, slip it over the component, and reassemble. The open-ended slip-on design avoids adhesives or heat-shrinking tools, making field repairs and upgrades quick and repeatable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip-on design — no special tools required\u003c\/li\u003e\n  \u003cli\u003eTrim to fit with basic cutting tools for custom lengths\u003c\/li\u003e\n  \u003cli\u003eReusable when removing and reinstalling for maintenance access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and compatibility notes should I consider?\u003c\/h3\u003e\n\u003cp\u003eHeat Sheath is fire-retardant and built for heavy-duty service, but it is not intended for permanent contact with exhaust headers or pipes. Allow air gap or use appropriate hardware when routing near direct exhaust surfaces, and verify fitment against component diameters and movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFire-resistant construction — designed for automotive and industrial use\u003c\/li\u003e\n  \u003cli\u003eDo not wrap directly on exhaust components; maintain clearance\u003c\/li\u003e\n  \u003cli\u003eChoose the correct internal diameter (3\/4\" I.D.) for a snug fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Design Engineering Heat Sheath is aimed at mechanics, performance tuners, fleet managers, and industrial technicians who need a rugged, easy-to-install thermal and abrasion shield for hoses, wiring looms, and fluid lines. It’s ideal for engine bays, turbocharged systems, off-road vehicles, and industrial equipment where radiant heat and mechanical wear threaten component life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Heat Sheath be cut to length for custom installations?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it trims easily with common cutting tools for tailored lengths; finish edges to prevent fraying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this sleeving safe to use directly on exhaust headers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — do not apply directly to exhaust components; maintain an air gap or use heat shields instead.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67592816689337,"sku":"B000E267M4","price":56.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-heat-sheath-front-packaging_05abbefd-1bbd-48ce-9589-6e8261096aee.jpg?v=1790568415"},{"product_id":"design-engineering-radiator-relief-cooling-system-flush-16-oz-cleans-rust-scale-protects-metals","title":"Design Engineering Radiator Relief Cooling System Flush 16 oz - Cleans Rust \u0026 Scale, Protects Metals","description":"\u003cstrong\u003eDesign Engineering Radiator Relief Cooling System Flush is a 16 oz professional-grade treatment that dissolves rust, scale, and sludge to restore coolant flow and improve radiator heat transfer.\u003c\/strong\u003e\n\n\u003cp\u003eOver time cooling systems collect rust, mineral deposits, and oily residues that narrow coolant passages and degrade thermal performance. This 16-ounce concentrate from Design Engineering (DEI) is formulated to clean the radiator, heater core, and internal passages, then be drained away so you can refill with fresh coolant. The product is compatible with common coolant chemistries and radiator materials, making it a straightforward option for routine maintenance or when diagnosing overheating and poor heater performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this flush clear rust and scale inside my radiator?\u003c\/h3\u003e\n\u003cp\u003eThe chemical formulation targets and loosens rust, scale, and sludge so they can be flushed out with the cooling system fluid. It works within minutes of circulation and is designed to break deposits into removable particles without aggressive acid attacks on metals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContains agents that dissolve oxidation and mineral buildup.\u003c\/li\u003e\n  \u003cli\u003eIncludes corrosion inhibitors to buffer metal surfaces during cleaning.\u003c\/li\u003e\n  \u003cli\u003eAnti-foaming components keep circulation effective while flushing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it safe for different radiator materials and coolant types?\u003c\/h3\u003e\n\u003cp\u003eYes — Radiator Relief is formulated to be compatible with cast iron, aluminum, copper, and brass radiators. It also works with ethylene glycol and propylene glycol based antifreeze blends, allowing use across automotive, marine, and light industrial cooling systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for common coolant mixtures and additive packages.\u003c\/li\u003e\n  \u003cli\u003eNon-damaging to seals and hoses when used as directed.\u003c\/li\u003e\n  \u003cli\u003eBalanced pH and corrosion inhibitors help protect metals during treatment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use this product for best results?\u003c\/h3\u003e\n\u003cp\u003eApplication is simple: add the recommended dose to the radiator or coolant reservoir, run the engine to circulate the solution, then drain and flush the system before refilling. Follow the usage rate of approximately 1 oz per quart of coolant for effective cleaning without over-concentration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePour into a cold radiator or overflow reservoir before starting the engine.\u003c\/li\u003e\n  \u003cli\u003eRun engine until the thermostat opens and allow circulation for the specified time.\u003c\/li\u003e\n  \u003cli\u003eDrain, flush with water as needed, and refill with fresh coolant mixture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill regular use prevent future corrosion and overheating?\u003c\/h3\u003e\n\u003cp\u003eUsing a cleaning treatment as part of scheduled maintenance reduces buildup that restricts coolant flow and heat exchange. While no product guarantees permanent prevention, regular flushing and correct coolant service extend component life and lower the chance of overheating caused by internal deposits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps maintain efficient coolant circulation and heat transfer.\u003c\/li\u003e\n  \u003cli\u003eRemoves deposits that can harbor corrosion and block passages.\u003c\/li\u003e\n  \u003cli\u003eSupports longer service intervals and fewer emergency repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Design Engineering Radiator Relief Cooling System Flush is aimed at vehicle owners, DIY mechanics, and professional technicians who need a reliable cleaning treatment for gasoline and diesel cooling systems. It fits drivers maintaining passenger cars, light trucks, boats, and equipment with mixed-metal radiators who want a safe, easy-to-use flush to restore cooling performance and protect components during cleaning.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Radiator Relief with any coolant type?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it's compatible with common ethylene and propylene glycol antifreezes and their mixtures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much product do I add per coolant volume?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use about 1 oz of Radiator Relief for every quart of coolant in the system.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Design Engineering","offers":[{"title":"Default Title","offer_id":67593239888057,"sku":"B000NV1PBY","price":60.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/design-engineering-radiator-relief-front-label.jpg?v=1790573521"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/design-engineering-radiator-relief-front-label.jpg?v=1790612739","url":"https:\/\/redleafauto.ca\/collections\/design-engineering.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}