{"title":"DURATECH","description":"\u003cp\u003eBrowse 23 DURATECH products at RedLeaf Auto, including oil change tools, pullers \u0026amp; extractors and garage \u0026amp; shop equipment. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"duratech-6-5l-oil-extractor-pump-pneumatic-manual-fluid-extractor-with-extension-tubes","title":"DURATECH 6.5L Oil Extractor Pump — Pneumatic \u0026 Manual Fluid Extractor with Extension Tubes","description":"\u003cp\u003e\u003cstrong\u003eThe DURATECH 6.5L Oil Extractor Pump is a portable pneumatic and manual fluid-extraction kit designed to remove and replace engine oil and other automotive fluids cleanly without tipping vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're servicing a motorcycle, lawnmower, boat, or car, the DURATECH 6.5L fluid extractor gives you a safer, neater alternative to draining from the oil pan. The kit combines a 6.5-liter collection tank with both manual hand-pump operation and an option to attach an air compressor for faster extraction. Included extension tubes and a brake-bleeding hose increase versatility, while dedicated storage keeps hoses tidy after use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DURATECH extractor remove oil without tilting the engine?\u003c\/h3\u003e\n\n\u003cp\u003eThe extractor draws fluid out through a suction tube that accesses the oil fill or dipstick tube, so you don't need to raise or tip the machine. For quicker draws you can hook the pump to an air compressor; otherwise the hand-pump mode performs reliable extraction where no compressor is available.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e6.5L sealed tank collects extracted fluid for disposal.\u003c\/li\u003e\n  \u003cli\u003ePneumatic mode connects to an air compressor for faster suction.\u003c\/li\u003e\n  \u003cli\u003eManual hand-pump mode requires no power, perfect for roadside or remote work.\u003c\/li\u003e\n  \u003cli\u003eMultiple extension tubes let you reach deep or awkward fill ports.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how do I store the hoses tidy?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit ships as a complete package so you can begin service immediately: the main tank, a rigid main tube, three extension tubes, a brake bleeding hose, three alternate rubber rings, and an instructions manual. DURATECH upgraded the extractor with two dedicated suction-tube storage holders that fasten to the tank so used hoses don’t drip or create a mess.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 x 6.5L extractor tank and main tube for immediate use.\u003c\/li\u003e\n  \u003cli\u003e3 extension tubes to adapt to different fill openings and depths.\u003c\/li\u003e\n  \u003cli\u003eBrake bleeding hose for fluid transfer and small-volume jobs.\u003c\/li\u003e\n  \u003cli\u003eTwo molded tube holders and metal fastening ring for clean storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and machines will this pump work with?\u003c\/h3\u003e\n\n\u003cp\u003eThis extractor is suitable for a wide range of automotive and small-engine fluids including engine oil, transmission fluid, power steering fluid, antifreeze, gear oil and brake fluid. It fits many vehicles and machines — cars, trucks, RVs, boats, lawnmowers, motorcycles and golf carts — making it a multi-purpose tool for home mechanics, fleet operators, and boat owners.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with engine oil, transmission fluid, gear oil, brake fluid, and antifreeze.\u003c\/li\u003e\n  \u003cli\u003eWorks on cars, light trucks, motorcycles, lawnmowers, boats, RVs, and golf carts.\u003c\/li\u003e\n  \u003cli\u003eThree seal rings help adapt to varying tube diameters and prevent leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the extractor save time and reduce mess during oil changes?\u003c\/h3\u003e\n\n\u003cp\u003eUsing suction to pull fluid through a fill or dipstick tube eliminates the need to crawl under a vehicle or tip small engines, which reduces spills and makes the job faster. The sealed tank holds fluid securely until you can dispose of it properly, and the storage holders prevent residual oil from leaking after the job is finished.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNo need to jack, tip, or remove drain plugs for many oil changes.\u003c\/li\u003e\n  \u003cli\u003eSealed 6.5L reservoir minimizes spillage during transport and disposal.\u003c\/li\u003e\n  \u003cli\u003eQuick-change between pneumatic and manual modes to suit the workspace.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DURATECH 6.5L Oil Extractor Pump is ideal for DIY mechanics, mobile technicians, fleet maintainers, and homeowners who prefer to service small engines and vehicles themselves. If you need a portable, adaptable extractor that reduces mess, speeds routine fluid changes, and stores neatly between jobs, this kit provides the essential components for professional-feeling results without specialized shop equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the DURATECH extractor without an air compressor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit has a manual hand-pump mode that works anywhere without extra equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What capacity of fluid can the tank hold?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The sealed tank holds 6.5 liters of extracted fluid for convenient disposal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67585510244537,"sku":"B0CNK2BGTQ","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-view-extractor-tank.jpg?v=1790471873"},{"product_id":"duratech-oil-filter-swivel-wrench-set-8-piece-kit-70-132mm-bands-adapter-for-3-8-1-2-drives","title":"DURATECH Oil Filter Swivel Wrench Set — 8-Piece Kit, 70–132mm Bands \u0026 Adapter for 3\/8\"–1\/2\" Drives","description":"\u003cp\u003e\u003cstrong\u003eDURATECH's 8-piece Oil Filter Swivel Wrench Set is a complete, adjustable toolkit for removing and installing a wide range of automotive oil filters in tight spaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis durable kit brings four swivel band wrenches, two long-handled pliers, an adapter for socket drives, and a compact carrying case so you can quickly grab the right tool on the job or at home. The components combine flexible 180° swivel heads, a dimpled stainless-steel band for grip, and serrated plier jaws to handle stubborn, oily filters without damaging housings. It works with most common filter sizes and fits ratchets with 3\/8\" or 1\/2\" drives via the included adapter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the swivel head design help in confined engine bays?\u003c\/h3\u003e\n\n\u003cp\u003eThe swivel heads rotate 180° to let the band align with the filter even when access is limited. That flexibility reduces the need to remove surrounding parts and lets you maintain steady, adjustable tension during turning.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFour bands that pivot independently for angled access\u003c\/li\u003e\n  \u003cli\u003eCompact profile fits between hoses and brackets\u003c\/li\u003e\n  \u003cli\u003eAdjustable grip keeps pressure on the filter while turning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich filter sizes and vehicle types does this set cover?\u003c\/h3\u003e\n\n\u003cp\u003eThe set includes four band sizes covering about 70 mm to 132 mm and two pliers that adjust across multiple positions, making it compatible with most passenger cars, SUVs, light trucks, tractors, and small equipment. It’s designed to be versatile for routine maintenance and occasional tougher removals.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSmall band: 70–83 mm (2-3\/4\"–3-1\/4\")\u003c\/li\u003e\n  \u003cli\u003eMedium band: 83–98 mm (3-1\/4\"–3-7\/8\")\u003c\/li\u003e\n  \u003cli\u003eLarge band: 98–111 mm (3-7\/8\"–4-3\/8\")\u003c\/li\u003e\n  \u003cli\u003eExtra-large band: 118–132 mm (4-5\/8\"–5-1\/4\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features improve grip on oily or rounded filters?\u003c\/h3\u003e\n\n\u003cp\u003eDURATECH combines a textured stainless-steel band with a non-slip handle and serrated plier teeth so the tools maintain purchase even when surfaces are wet with oil. The dimpled band design increases friction without cutting into casings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDimpled stainless-steel band for higher surface contact and less slippage\u003c\/li\u003e\n  \u003cli\u003eSerrated teeth on pliers bite securely into smooth, oily filters\u003c\/li\u003e\n  \u003cli\u003eLong plier handles provide extra leverage in stuck situations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the adapter and case add value for regular use?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes an adapter that accepts either 3\/8\" or 1\/2\" drive ratchets, letting you use standard shop tools for higher torque. Everything stores in the supplied carrying case, keeping bands and pliers organized and protecting teeth and swivel joints from damage between jobs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdapter for 3\/8\" and 1\/2\" drive compatibility\u003c\/li\u003e\n  \u003cli\u003eOrganized molded case for quick access and storage\u003c\/li\u003e\n  \u003cli\u003ePortable layout for mobile mechanics and DIYers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Mechanics, weekend DIYers, fleet maintenance personnel, and anyone who services multiple vehicle types will find this DURATECH 8-piece set useful. It’s especially handy when space is tight or when filters are oily and difficult to grip; the range of band sizes plus adjustable pliers and the drive adapter provide both versatility and leverage for most common oil filter tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this set fit my car's oil filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes — bands cover 70–132 mm and pliers adjust for many sizes. Check your filter diameter against those ranges.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these with a ratchet for extra torque?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The included adapter works with 3\/8\" or 1\/2\" drive ratchets for added leverage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67586501771449,"sku":"B0BNHWGBV9","price":127.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-of-kit.jpg?v=1790485022"},{"product_id":"duratech-swivel-magnetic-spark-plug-socket-set-5-piece-3-8-drive-long-reach-360-flex","title":"DURATECH Swivel Magnetic Spark Plug Socket Set 5‑Piece, 3\/8\" Drive — Long‑Reach 360° Flex","description":"\u003cp\u003e\u003cstrong\u003eDURATECH 5PCS Swivel Magnetic Spark Plug Socket Set is a long-reach, 360° swivel, magnetic core socket kit designed to remove and install spark plugs in tight engine bays with a 3\/8\" drive.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for mechanics and DIYers who need reach, control and a secure hold on spark plugs, this five-piece set combines heat-treated Chrome Vanadium construction with a chrome finish and a magnetic insert so sockets resist wear and keep plugs steady during removal or installation. The kit includes a range of socket sizes and lengths organized in a carry case so you can transport and store the sockets neatly between jobs.\u003c\/p\u003e\n\n\u003ch3\u003eWhat socket sizes and lengths come in this DURATECH set?\u003c\/h3\u003e\n\u003cp\u003eThe set contains five sockets with mixed 6-point and 12-point heads suitable for most automotive spark plugs. Four length options let you access plugs recessed deep in the cylinder head or tucked behind engine components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSocket diameters: 5\/8\" (16mm), 14mm, 9\/16\" (approx. 14.3mm).\u003c\/li\u003e\n  \u003cli\u003eTotal socket lengths: 4 inch, 6 inch, 8 inch and 11 inch for long-reach needs.\u003c\/li\u003e\n  \u003cli\u003eDrive type: 3\/8\" square drive with drive tang compatible with standard ratchets and extensions.\u003c\/li\u003e\n  \u003cli\u003ePoint configurations: Both 6-point and 12-point sockets included for versatility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 360° swivel and extra-long design help in tight engine bays?\u003c\/h3\u003e\n\u003cp\u003eThe swivel flex head lets you approach the plug at unconventional angles and the long socket bodies reach recessed plugs without disassembling surrounding parts. Together they reduce strain, speed up the job and limit the need for additional tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e360° swivel flex head provides articulation for angled access.\u003c\/li\u003e\n  \u003cli\u003eExtra-long rods (up to 11\") reach deeply set spark plugs.\u003c\/li\u003e\n  \u003cli\u003eFewer removed components and faster service times in cramped spaces.\u003c\/li\u003e\n  \u003cli\u003eWorks well with extensions and 3\/8\" ratchet handles for leverage control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy is the magnetic core and Cr-V steel construction important for spark plug work?\u003c\/h3\u003e\n\u003cp\u003eThe magnetic insert secures the spark plug to the socket, minimizing the chance of dropping or damaging the porcelain while you maneuver. Heat-treated Chrome Vanadium (Cr-V) steel gives the sockets strength and wear resistance for repeated professional use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMagnetic core holds plugs steady for safe removal and installation.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated Cr-V steel resists deformation under torque.\u003c\/li\u003e\n  \u003cli\u003eChrome plating offers corrosion resistance and simplifies cleaning.\u003c\/li\u003e\n  \u003cli\u003e6-point and 12-point heads reduce slipping on fastener corners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are the sockets stored and identified during use?\u003c\/h3\u003e\n\u003cp\u003eThe set ships in an organized storage box with size-marked socket heads so you can quickly pick the right tool. Clear markings and compact packaging keep the set transportable and easy to inventory in a toolbox or work van.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact carry box organizes sockets for easy transport and storage.\u003c\/li\u003e\n  \u003cli\u003eSize markings on each socket head for quick identification.\u003c\/li\u003e\n  \u003cli\u003eChrome finish resists oil and grime build-up for cleaner handling.\u003c\/li\u003e\n  \u003cli\u003eSet layout reduces time searching for the correct socket during jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DURATECH 5PCS Swivel Magnetic Spark Plug Socket Set is ideal for automotive technicians, motorcycle mechanics, small-engine repairers and home mechanics who frequently service spark plugs in tight or recessed engine locations. It suits users who want durable Cr-V construction, magnetic retention to protect spark plug porcelain, and a versatile range of lengths and point styles to cover many vehicle applications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sockets compatible with standard 3\/8\" ratchets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set uses a 3\/8\" square drive and fits standard 3\/8\" ratchets and extensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the magnetic core damage spark plug porcelain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The magnetic insert holds the plug gently to prevent drops and reduces handling stress on porcelain.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67586899050681,"sku":"B09DYH8CWQ","price":106.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-packaging-socket-set.jpg?v=1790496556"},{"product_id":"duratech-3pc-silicone-tool-tray-set-flexible-tool-trays-large-medium-small-heat-chemical-resistant","title":"DURATECH 3PC Silicone Tool Tray Set — Flexible Tool Trays (Large, Medium, Small), Heat \u0026 Chemical Resistant","description":"\u003cp\u003e\u003cstrong\u003eDURATECH 3PC Flexible Tool Tray is a set of three silicone organizers (large, medium, small) designed to keep hammers, wrenches, sockets and small parts neatly contained and easy to carry during repairs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese three nested, flexible trays combine durable silicone construction with molded grooves, corner grids and handles to organize a range of hand tools and fasteners at a workbench, on a vehicle, or in a toolbox. Built to resist common workshop stresses such as spills, chemicals and heat exposure, each tray is washable and nests for compact storage when not in use. The set balances portability and stability so parts stay put on uneven surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow do the three sizes cover my tool organization needs?\u003c\/h3\u003e\n\n\u003cp\u003eThe set includes three distinct tray sizes so you can separate large tools, medium hand tools and small hardware without mixing items. Each tray is shaped for specific tool groups and nests together for tidy storage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLarge tray (19.92 × 10.43 in) holds hammers, larger wrenches and bulky items.\u003c\/li\u003e\n  \u003cli\u003eMedium tray (24.7 × 21.3 cm) suits screwdrivers, pliers, nippers and mid‑sized tools.\u003c\/li\u003e\n  \u003cli\u003eSmall tray (9.72 × 5.71 in) contains sockets, nuts, bolts and tiny components.\u003c\/li\u003e\n  \u003cli\u003eMedium and small trays fit inside the large tray to save space when unused.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these trays survive shop conditions like grease, heat and chemicals?\u003c\/h3\u003e\n\n\u003cp\u003eThe trays are molded from high‑quality silicone that resists rusting and is tolerant of many workshop substances and temperature exposure. Surfaces wipe clean with water or mild cleaner, keeping the trays functional and looking new with minimal maintenance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eChemical‑resistant silicone tolerates common fuels and fluids encountered during maintenance.\u003c\/li\u003e\n  \u003cli\u003eHeat‑resistant material withstands warmth produced during repairs and machining.\u003c\/li\u003e\n  \u003cli\u003eEasy to clean — rinse or wipe down to remove grease and dirt.\u003c\/li\u003e\n  \u003cli\u003eThicker silicone construction reduces the chance of tears or deformation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these trays keep parts from sliding or getting lost on uneven surfaces?\u003c\/h3\u003e\n\n\u003cp\u003eSilicone’s natural grip and the trays’ internal grooves help prevent tools and hardware from sliding, even on angled or textured surfaces. Built‑in corner grids and tool grooves create organized pockets so small parts stay separated and easy to find.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh‑friction silicone base prevents tray movement on workbenches and vehicle panels.\u003c\/li\u003e\n  \u003cli\u003eMolded tool grooves hold screwdrivers and pliers in place.\u003c\/li\u003e\n  \u003cli\u003eCorner grid compartments corral nuts, washers and small fasteners.\u003c\/li\u003e\n  \u003cli\u003eHandles on the large tray make transporting components safer and reduces spills.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these trays safe around electrical work or magnets?\u003c\/h3\u003e\n\n\u003cp\u003eThe silicone set offers electrical insulation properties and resists magnetic interference, improving safety when working near live circuits or magnetic tools. That said, always follow electrical safety best practices and keep live power isolated when working on wiring.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eElectrically insulating silicone helps reduce accidental conduction risks.\u003c\/li\u003e\n  \u003cli\u003eNon‑magnetic behavior avoids unintended attraction of metallic parts.\u003c\/li\u003e\n  \u003cli\u003eIdeal for separating electronic fasteners from magnetic tool holders.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DURATECH 3PC Flexible Tool Tray set is aimed at mechanics, DIY hobbyists, mobile technicians and anyone who regularly sorts tools and small hardware. It fits situations that need portable, durable organization — from home garages and professional bays to field repairs — and is suitable for users who want washable, non‑slip trays that nest for compact storage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the trays withstand automotive fluids and light heat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The silicone resists common workshop chemicals and tolerates heat generated during typical maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the trays nest for compact storage?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The medium and small trays fit into the large tray so the set stores neatly when not in use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67587564961977,"sku":"B0B1TW2JP8","price":102.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-packaging-tray-set.jpg?v=1790513010"},{"product_id":"duratech-ball-joint-separator-set-5-piece-pickle-fork-kit-forged-40-steel-blow-molded-case","title":"DURATECH Ball Joint Separator Set, 5-Piece Pickle Fork Kit — Forged 40# Steel \u0026 Blow-Molded Case","description":"\u003cstrong\u003eThe DURATECH 5-piece ball joint separator set is a complete pickle-fork and handle system for removing ball joints, tie rods, and pitman arms on cars and light trucks.\u003c\/strong\u003e\n\n\u003cp\u003eThis professional-grade kit combines five SAE-standard forks with two handles to tackle hard-to-reach suspension and steering connections. Built from forged, heat-treated 40# steel and chrome plated for corrosion resistance, the components are designed to withstand repeated strikes and the high-impact demands of automotive work. The set ships in a blow-molded case so technicians and DIYers can organize tools and move quickly between jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this set make separating ball joints and tie rods easier?\u003c\/h3\u003e\n\u003cp\u003eThe interchangeable forks and handles let you choose the right shape and reach for the joint you’re removing without needing multiple dedicated tools. Knurled striking handles provide a secure grip and protect tool threads when using hammers or air hammers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFive SAE forks cover common sizes: 11\/16\", 15\/16\", and 1-1\/8\" among others\u003c\/li\u003e\n  \u003cli\u003eTwo handle options: a 7-7\/8\" knurled striking handle and a 6-31\/32\" adapter for air hammers\u003c\/li\u003e\n  \u003cli\u003eInterchangeable design reduces tool count and speeds job setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these separators durable enough for frequent shop use?\u003c\/h3\u003e\n\u003cp\u003eYes — each fork is forged from 40# steel and heat treated for superior strength, then chrome plated to resist rust and extend service life. The construction resists bending and surface wear under heavy impact conditions commonly found in suspension work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged, heat-treated 40# steel for impact resistance\u003c\/li\u003e\n  \u003cli\u003eChrome plating for corrosion protection and easier cleaning\u003c\/li\u003e\n  \u003cli\u003eKnurled handles to reduce slippage and protect tool threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicle components will this kit fit and what sizes are included?\u003c\/h3\u003e\n\u003cp\u003eThe kit targets standard-size ball joints, tie rods, and pitman arms found on many cars and light trucks. The five-piece set provides a range of fork widths and profiles so you can match the correct fork to the joint type and clearance constraints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrack rod fork: 11\/16\" for smaller tie rods\u003c\/li\u003e\n  \u003cli\u003eBall joint fork: 15\/16\" for common ball joint separations\u003c\/li\u003e\n  \u003cli\u003ePitman arm fork: 1-1\/8\" for larger steering components\u003c\/li\u003e\n  \u003cli\u003eTwo handles: 7-7\/8\" knurled striking handle and 6-31\/32\" air hammer adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the case and kit layout help during repairs?\u003c\/h3\u003e\n\u003cp\u003eThe molded carrying case keeps each fork and handle organized so you can identify sizes quickly and transport the set without parts coming loose. Clear organization reduces time searching for the right fork and protects components from knocks during storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSturdy blow-molded case for secure storage and transport\u003c\/li\u003e\n  \u003cli\u003eDedicated slots for both handles and all forks to prevent shifting\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits into tool cabinets or vehicle trunks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DURATECH 5-piece ball joint separator set suits professional mechanics, mobile technicians, and knowledgeable DIYers who service suspension or steering systems on cars and light trucks. If you need a compact, durable kit that covers common SAE sizes, provides both hammer and air-hammer options, and keeps everything organized, this set delivers the versatility and durability required for frequent workshop use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the set with an air hammer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a 6-31\/32\" adapter handle designed for use with air hammers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What sizes of forks are included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The set contains 11\/16\", 15\/16\", and 1-1\/8\" forks plus additional SAE-standard pieces for broad coverage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67587916464313,"sku":"B09CYDTBD7","price":90.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-packaging.jpg?v=1790515790"},{"product_id":"duratech-6-inch-3-jaw-gear-puller-cr-v-steel-fully-assembled-5-7-ton-capacity","title":"DURATECH 6-Inch 3-Jaw Gear Puller — CR-V Steel, Fully Assembled, 5.7 Ton Capacity","description":"\u003cp\u003e\u003cstrong\u003eThe DURATECH 6-inch 3-jaw gear puller is a ready-to-use, heavy-duty removal tool made from heat-treated CR-V steel for safely extracting gears, bearings, pulleys and flywheels up to 150 mm.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis fully assembled 3-jaw puller combines a balanced three-point grip with reversible jaws and corrosion-resistant finishes so you can remove pressed-on components in tight spaces without improvising. With fine chrome-plated jaws and a black-phosphatized drive screw, the tool is engineered for repeated workshop use while minimizing rust and wear. It fits common wrenches, ratchets, or spanners and offers multiple reach positions to handle inside- or outside-pulling jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DURATECH puller make removing gears and bearings easier?\u003c\/h3\u003e\n\u003cp\u003eThe three jaws distribute force evenly around the part to reduce slippage and bending. Precisely machined claws bite securely into gear teeth or bearing races, letting you apply steady axial force to slide components off shafts without hammering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-jaw balance lowers the risk of tilting or uneven pulls\u003c\/li\u003e\n  \u003cli\u003eFine chrome plating resists rust and keeps jaws smooth in operation\u003c\/li\u003e\n  \u003cli\u003e3 reversible positions enable inside or outside grips\u003c\/li\u003e\n  \u003cli\u003eDrive screw compatible with wrench, ratchet or spanner for controlled force\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and capacity does this 6-inch puller support?\u003c\/h3\u003e\n\u003cp\u003eJaw spread measures 6 inches and the jaw reach ranges from 6\" to 9-9\/16\" depending on jaw position, covering parts up to roughly 150 mm in diameter. The assembly is rated to exert up to 5.7 tons of pulling force, suitable for many automotive and industrial removal tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJaw spread: 6 in (150 mm maximum use range)\u003c\/li\u003e\n  \u003cli\u003eJaw reach: adjustable 6\" to 9-9\/16\" (short to extra-long positions)\u003c\/li\u003e\n  \u003cli\u003ePulling capacity: approximately 5.7 tons (5.7 T)\u003c\/li\u003e\n  \u003cli\u003eWorks with common hand tools—no special adapters required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this puller handle confined spaces and reversed mounting?\u003c\/h3\u003e\n\u003cp\u003eYes — the reversible jaw design offers eight position settings so each jaw can be oriented for inside or outside gripping and selected for short, standard, long or extra-long reach. The compact 3-jaw profile and slim drive screw make it practical for use where clearance is limited.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReversible jaws allow inside or outside pulls without disassembly\u003c\/li\u003e\n  \u003cli\u003eMultiple reach settings let you tailor the grip for cramped locations\u003c\/li\u003e\n  \u003cli\u003eDrop-forged CR-V construction keeps the tool slim and strong\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion resistant is the DURATECH 3-jaw puller?\u003c\/h3\u003e\n\u003cp\u003eComponents are designed for extended shop duty: jaws are drop-forged from chromium-vanadium steel and heat-treated for toughness, while fine chrome plating adds corrosion resistance. The drive screw receives a black phosphating finish to protect its threads and reduce galling under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-forged CR-V jaws are heat-treated for added strength\u003c\/li\u003e\n  \u003cli\u003eFine chrome plating on jaws resists rust and wear\u003c\/li\u003e\n  \u003cli\u003eBlack-phosphatized drive screw for long-lasting thread protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this tool is for: The DURATECH 6-inch 3-jaw gear puller suits mechanics, maintenance technicians, restorers, and hobbyists who need a compact, sturdy puller for automotive, agricultural, and light industrial work. If you regularly remove gears, pulleys, bearings or flywheels and want a ready-to-use, corrosion-resistant tool with multiple grip options and a 5.7T capacity, this model is built to save time and reduce risky improvised methods.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the DURATECH 6-inch puller ready to use out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It comes fully assembled and fits common wrenches, ratchets, or spanners with no setup required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the jaws pull from the inside and outside?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The three jaws are reversible with eight position options for both inside and outside gripping.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67588523884729,"sku":"B08G8SQ7FJ","price":85.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-view-fully-assembled.jpg?v=1790519625"},{"product_id":"duratech-2-in-1-brake-bleeder-kit-metal-hand-vacuum-pump-integrated-gauge-carry-case","title":"DURATECH 2-in-1 Brake Bleeder Kit — Metal Hand Vacuum Pump, Integrated Gauge \u0026 Carry Case","description":"\u003cp\u003e\u003cstrong\u003eThe DURATECH 2-in-1 Brake Bleeder Kit is a portable aluminum-alloy vacuum pump kit that creates pressure and vacuum to bleed brakes, test vacuum systems, and siphon fluids for cars, bikes, and motorcycles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit combines a durable metal handheld vacuum pump with an integrated gauge, jars, hoses and multiple adapters so you can perform many common maintenance tasks without a shop. Built from wear-resistant aluminum alloy, the pump is meant to withstand repeated use while the clear reservoirs and assortment of fittings let you capture and inspect brake fluid and other liquids. Everything nests in a molded carry case so the set is organized for storage or roadside repairs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DURATECH kit help with bleeding brake systems?\u003c\/h3\u003e\n\u003cp\u003eThe pump pulls fluid and trapped air from hydraulic lines to speed and simplify brake bleeding. Using the included reservoirs prevents mess and lets you monitor fluid clarity and air bubbles as you work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates steady vacuum to draw brake fluid through bleeder valves\u003c\/li\u003e\n  \u003cli\u003eTwo 4.05 oz clear jars collect expelled fluid for inspection\u003c\/li\u003e\n  \u003cli\u003eTransparent hoses let you see trapped air and fluid flow\u003c\/li\u003e\n  \u003cli\u003eMultiple adapters fit common bleeder nipples on cars and motorcycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it to test vacuum-operated components?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit’s built-in vacuum gauge provides readable values to check vacuum lines and components such as boosters, valves and actuators. The gauge covers common automotive ranges so you can diagnose leaks or weak vacuum sources.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated vacuum gauge measures 0–30 in\/Hg (0–760 mm\/Hg)\u003c\/li\u003e\n  \u003cli\u003eUse for brake boosters, vacuum valves, or intake leaks\u003c\/li\u003e\n  \u003cli\u003eQuick connect fittings let you adapt to varied vacuum ports\u003c\/li\u003e\n  \u003cli\u003eHandheld design enables on-car testing without large equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories are included and how do they improve versatility?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with hoses, adapters and connectors to cover many vehicle types, making it useful for cars, motorcycles, bikes and small engines. Clear reservoirs and multiple fittings reduce guesswork and let you repurpose the tool for siphoning or sealing tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFive transparent hoses for visual monitoring and routing\u003c\/li\u003e\n  \u003cli\u003eTwelve adapters plus two connectors for broad compatibility\u003c\/li\u003e\n  \u003cli\u003eTwo compact 4.05 oz jars for fluid capture and disposal\u003c\/li\u003e\n  \u003cli\u003eMolded carry case keeps parts organized and protected\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this kit durable enough for repeated use in a home or small shop?\u003c\/h3\u003e\n\u003cp\u003eThe pump’s aluminum-alloy construction is chosen for wear resistance and longevity, while the compact case protects accessories during transport and storage. It’s designed for hobbyists and professional light-duty use rather than heavy industrial cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy pump body resists corrosion and wear\u003c\/li\u003e\n  \u003cli\u003eRobust fittings and hoses for repeated connections\u003c\/li\u003e\n  \u003cli\u003eCompact case suited for home garages or mobile technicians\u003c\/li\u003e\n  \u003cli\u003eEasy-to-read gauge for reliable diagnostics over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The DURATECH 2-in-1 Brake Bleeder Kit is aimed at home mechanics, motorcycle and bicycle owners, and light-duty technicians who want a portable, organized vacuum toolset. If you perform routine brake maintenance, troubleshoot vacuum-operated parts, or need a compact siphon and bleed solution that travels easily, this kit provides a practical, multi-function option without requiring bulky equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What vacuum range does the DURATECH gauge measure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The gauge measures 0–30 in\/Hg (0–760 mm\/Hg), suitable for most automotive vacuum diagnostics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit bleed motorcycle brakes as well as cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes multiple adapters and hoses to fit motorcycle and car bleeder nipples.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67588758110393,"sku":"B0F2MNXLZF","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-packaging_e0f962bb-ecc0-442e-b443-e9c324964a10.jpg?v=1790524271"},{"product_id":"duratech-2-in-1-brake-bleeder-kit-handheld-vacuum-pump-with-gauge-4-05-oz-jar-hoses","title":"DURATECH 2‑in‑1 Brake Bleeder Kit — Handheld Vacuum Pump with Gauge, 4.05 oz Jar \u0026 Hoses","description":"\u003cp\u003e\u003cstrong\u003eDURATECH's 2-in-1 Brake Bleeder Kit is a portable handheld vacuum pump system designed to bleed brake lines, test vacuum-operated components and siphon fluids for automotive maintenance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit pairs a manual vacuum pump with an integrated gauge, reservoir jar and multiple hoses and adapters so you can complete common brake, vacuum and fluid-transfer jobs without bulky shop equipment. The set is stored in a molded carry case and includes a clear collection jar and heat-resistant hoses sized for cars, motorcycles and bicycles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit help when bleeding brake systems?\u003c\/h3\u003e\n\u003cp\u003eThe vacuum pump pulls air and brake fluid through the bleeder port into the included jar so you can remove trapped air without a second person. The transparent reservoir makes it easy to see expelled fluid and measure progress while the gauge helps you monitor negative pressure during the procedure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates vacuum to draw fluid and air from brake lines\u003c\/li\u003e\n  \u003cli\u003eClear 4.05 oz reservoir jar for visible collection and contamination checks\u003c\/li\u003e\n  \u003cli\u003eMultiple hose sizes and adapters fit common bleeder nipples\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vacuum tests and diagnostic tasks can I perform with the pump?\u003c\/h3\u003e\n\u003cp\u003eThe built-in gauge reads 0–30 in\/Hg (0–760 mm\/Hg), letting you test brake boosters, vacuum lines and other intake components that rely on negative pressure. You can also use the pump to confirm leaks, operate vacuum-operated switches or hold pressure while you inspect fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVacuum gauge for accurate pressure readings\u003c\/li\u003e\n  \u003cli\u003eSuitable for brake boosters, vacuum lines and seals\u003c\/li\u003e\n  \u003cli\u003ePortable enough to use roadside or in a garage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich parts are included and how do they improve usability?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with a durable handheld pump, four transparent hoses, three adapter fittings, a 4.05 oz collection jar and a compact carry case. The contoured pump handle increases grip comfort during repeated pumps, and the hoses are made to resist heat and maintain a reliable seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHandheld vacuum pump with gauge for controlled operation\u003c\/li\u003e\n  \u003cli\u003eFour clear hoses for flexible routing and fluid visibility\u003c\/li\u003e\n  \u003cli\u003eThree adapters to fit a variety of bleeder nipples and fittings\u003c\/li\u003e\n  \u003cli\u003eCompact case keeps components organized for transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain and store the DURATECH vacuum pump kit?\u003c\/h3\u003e\n\u003cp\u003eAfter each use, rinse the reservoir with an appropriate solvent or mild cleaner and let it dry to prevent contamination. Inspect hoses and connectors for cracks or hardening, store the set in its molded case, and keep the gauge protected from impacts to preserve accuracy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean reservoir and dry before storage\u003c\/li\u003e\n  \u003cli\u003eCheck hoses and adapters for wear or leaks\u003c\/li\u003e\n  \u003cli\u003eStore in the built-in carry case to protect components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DURATECH 2-in-1 Brake Bleeder Kit is suited for DIY mechanics, home garages, motorcycle and bicycle owners, and small repair shops that need a compact, multi-use vacuum tool. It’s especially useful when you need a portable solution for bleeding brakes, diagnosing vacuum issues or transferring small volumes of fluid without setting up a shop-grade pump.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this pump bleed ABS-equipped brakes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It can remove air from traditional brake lines, but for ABS systems follow manufacturer procedures; some ABS modules require specific cycling methods.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What vacuum range does the gauge show?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The gauge measures 0–30 in\/Hg (0–760 mm\/Hg), suitable for most automotive vacuum tests.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67588799299769,"sku":"B0BQVJJXWT","price":90.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-view-kit.jpg?v=1790525070"},{"product_id":"duratech-oil-filter-wrench-set-9-12-adjustable-pliers-forged-steel-with-serrated-teeth","title":"DURATECH Oil Filter Wrench Set — 9\" \u0026 12\" Adjustable Pliers, Forged Steel with Serrated Teeth","description":"\u003cp\u003e\u003cstrong\u003eDURATECH Oil Filter Wrench Set delivers two adjustable pliers (9\" and 12\") that grip and remove oil filters quickly, even when oily or hard to reach.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you change oil at home or perform basic vehicle maintenance, the right filter wrench makes the job faster and less messy. This DURATECH kit includes two slip-joint adjustable pliers sized for most passenger cars, motorcycles, ATVs and light trucks. They combine heat-treated forged carbon-steel heads, serrated teeth for a secure hold, and long ergonomic handles to give you leverage in tight engine bays.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these pliers grip slippery oil filters?\u003c\/h3\u003e\n\u003cp\u003eThe jaws use hardened, serrated teeth that bite into the filter housing so you can turn it even when oil coats the surface. The design tightens the bite as you apply torque, reducing slippage and stripping risk.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged carbon-steel head for strength and wear resistance\u003c\/li\u003e\n  \u003cli\u003eSerrated tooth pattern grips smooth, oily surfaces\u003c\/li\u003e\n  \u003cli\u003eWorks in either rotating direction for removal or installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat filter sizes do the 9\" and 12\" wrenches fit?\u003c\/h3\u003e\n\u003cp\u003eEach wrench adjusts via a five-position slip joint so you can match the jaw opening to common filter diameters. The 9\" model suits smaller housings, while the 12\" handles larger filters found on light trucks and some motorcycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e9\" jaw capacity: approximately 1-3\/4\" to 3\" diameter\u003c\/li\u003e\n  \u003cli\u003e12\" jaw capacity: approximately 2-1\/2\" to 3-3\/4\" diameter\u003c\/li\u003e\n  \u003cli\u003eFive-position adjustment for quick size changes without tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy are the long handles and grips important?\u003c\/h3\u003e\n\u003cp\u003eExtended handles provide mechanical advantage so you need less force to loosen stuck filters, and they let you reach into cramped engine compartments. The bi-material grips cushion your hand, reduce vibration, and protect surfaces from accidental scratches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLong handles increase leverage for easier loosening\u003c\/li\u003e\n  \u003cli\u003eBi-material ergonomic grip reduces hand fatigue and slips\u003c\/li\u003e\n  \u003cli\u003eSafety edge design helps prevent accidental damage to nearby parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable are these tools?\u003c\/h3\u003e\n\u003cp\u003eDurability is built in with heat-treated forging of the plier heads and sturdy joint construction. With normal workshop use they hold up for repeated oil-service jobs and resist jaw deformation better than stamped or thin cast alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated forged carbon steel for long-lasting strength\u003c\/li\u003e\n  \u003cli\u003eSlip-joint mechanism rated for frequent adjustments and torque\u003c\/li\u003e\n  \u003cli\u003eEasy to clean after oily jobs—wipe down surfaces and store dry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DURATECH Oil Filter Wrench Set is aimed at DIY mechanics, home-service enthusiasts, motorcycle owners, and professional technicians who need reliable, adjustable pliers for oil filter removal and installation. If your filters fall within the listed diameter ranges and you want a compact, durable pair of wrenches with comfortable grips and good reach, this kit is a practical addition to your toolset. It’s particularly useful when space is tight, surfaces are slippery, or you want to reduce the risk of damaging the filter housing during service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these pliers fit my car's oil filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check the filter diameter: 9\" pliers fit ~1.75\"–3\", 12\" fit ~2.5\"–3.75\". If your filter falls inside those ranges, they should work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these handle filters covered in oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Heat-treated serrated jaws are designed to bite into oily or smooth housings to reduce slipping.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67590823379129,"sku":"B0BNHTCJS6","price":62.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-packaging-oil-filter-wrench-set.jpg?v=1790538420"},{"product_id":"duratech-500cc-fluid-extractor-with-long-hose-2-extension-tubes-transparent-50-4in-reach-double-ring-seal","title":"DURATECH 500cc Fluid Extractor with Long Hose \u0026 2 Extension Tubes — Transparent 50.4in Reach, Double-Ring Seal","description":"\u003cp\u003e\u003cstrong\u003eThe DURATECH 500CC Fluid Extractor is a compact, hand-operated suction pump with long hose and extension tubes designed to quickly and cleanly remove fluids from hard-to-reach places.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re draining small reservoirs, topping off systems, or transferring fluids during maintenance, this extractor combines a transparent 500cc body, a long silicone hose and two rigid extension tubes to reach awkward fittings without spills. Built from durable polypropylene with a double rubber-ring seal and a self-locking connector, it delivers controlled suction and accurate volume reading for cars, boats, lawn equipment and more.\u003c\/p\u003e\n\n\u003ch3\u003eHow far will the DURATECH extractor reach into tight spaces?\u003c\/h3\u003e\n\u003cp\u003eBy mixing the included rigid tubes and silicone hose, the extractor extends to access recessed fill points and deep reservoirs. The kit gives you flexibility for short jobs or long-reach extractions without needing additional adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 12\" rigid extension tubes for straight reaches\u003c\/li\u003e\n  \u003cli\u003eOne 27.6\" flexible silicone hose for curved or angled paths\u003c\/li\u003e\n  \u003cli\u003eAll three combined reach up to 50.4\" for deep access\u003c\/li\u003e\n  \u003cli\u003eEnd caps and alternate copper adapter for secure fit on various ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat prevents leaks and ensures strong suction?\u003c\/h3\u003e\n\u003cp\u003eThe pump uses a double rubber-ring seal and precision-threaded pump end to form a tight, airtight connection. That design minimizes drips and maintains consistent suction performance during repeated strokes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble seal design for improved airtightness\u003c\/li\u003e\n  \u003cli\u003ePrecision threads on the pump for secure attachment\u003c\/li\u003e\n  \u003cli\u003eSpare rubber sealing rings included for maintenance or replacement\u003c\/li\u003e\n  \u003cli\u003eSelf-locking copper connector holds hoses in place under pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and machines are suitable for this extractor?\u003c\/h3\u003e\n\u003cp\u003eThis extractor handles a variety of automotive and small-engine fluids safely when used as directed. It is intended for fluid transfer and removal from non-pressurized systems on vehicles and equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTransmission fluid, power steering fluid, coolant and brake fluid\u003c\/li\u003e\n  \u003cli\u003eEngine oil, gear oil and other maintenance fluids\u003c\/li\u003e\n  \u003cli\u003eCars, trucks, boats, RVs, lawnmowers and golf carts\u003c\/li\u003e\n  \u003cli\u003eNot for pressurized systems or chemical incompatibles — follow safety guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to read amounts and keep the pump working?\u003c\/h3\u003e\n\u003cp\u003eThe DURATECH extractor has a clear, graduated body so you can watch fluid enter and measure quantity without guesswork. The kit also includes spare parts and connectors to keep the tool serviceable over many uses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTransparent pump body with clear measurement markings\u003c\/li\u003e\n  \u003cli\u003eAccessory pack: metal connector, anti-drip rubber connector, copper adapter\u003c\/li\u003e\n  \u003cli\u003eTwo spare rubber sealing rings provided for quick replacement\u003c\/li\u003e\n  \u003cli\u003eDurable PP construction resists cracking in normal workshop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The DURATECH 500CC Fluid Extractor is built for DIY mechanics, home garage owners, professional detailers and small-fleet technicians who need a portable, accurate tool for draining and transferring fluids in confined or awkward locations. It’s ideal when you want controlled suction, clear volume reading and flexible reach without lifting the vehicle or opening complex drain plugs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this extractor handle engine oil and coolant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s suitable for engine oil, coolant and other non-pressurized fluids when used following standard safety practices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long can the extension setup reach?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Combined, the two hard tubes and the silicone hose reach up to about 50.4 inches for deep or recessed ports.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67590982205625,"sku":"B0DBQ9Q19T","price":62.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-assembled-extractor.jpg?v=1790539716"},{"product_id":"duratech-4-inch-3-jaw-gear-puller-cr-v-steel-4-ton-capacity-fully-assembled","title":"DURATECH 4-Inch 3-Jaw Gear Puller, CR-V Steel, 4-Ton Capacity, Fully Assembled","description":"\u003cp\u003e\u003cstrong\u003eDURATECH's 4-inch 3-jaw gear puller is a fully assembled CR-V steel removal tool that safely extracts gears, pulleys, bearings and flywheels with a balanced three-jaw grip and a 4-ton capacity.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, ready-to-use puller is built from drop-forged chrome-vanadium (CR-V) steel with heat-treated jaws and corrosion-resistant finishes so you can tackle stubborn press-fit parts without fuss. The reversible three-jaw layout offers both internal and external gripping options, while the black-phosphated drive screw and chrome-plated claws resist wear and rust. Designed to work with common hand tools — wrench, ratchet, or spanner — it suits garage mechanics, home DIYers and professional technicians needing a reliable small-capacity puller.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DURATECH 3-jaw design make removal easier?\u003c\/h3\u003e\n\u003cp\u003eThe three jaws distribute force evenly around the part for a stable, non-slip extraction that reduces slippage and part damage. Jaws are machined precisely to bite securely, and their reversible configuration lets you switch between inside and outside pulls quickly without extra parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBalanced force from three jaws for controlled straight pulls\u003c\/li\u003e\n  \u003cli\u003eReversible jaws support internal or external gripping\u003c\/li\u003e\n  \u003cli\u003ePrecisely machined claws reduce risk of rounding or slippage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes protect the tool under workshop conditions?\u003c\/h3\u003e\n\u003cp\u003eThe main components are forged from chrome-vanadium steel and heat-treated to improve strength and durability under load. Chrome plating on the jaws guards against rust and corrosion, while the drive screw’s black-phosphating increases surface hardness and wear resistance for longer service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-forged CR-V steel for high tensile strength\u003c\/li\u003e\n  \u003cli\u003eHeat-treated jaws for improved durability under heavy strain\u003c\/li\u003e\n  \u003cli\u003eChrome-plated claws and black-phosphated screw for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size range and capacity does this puller support?\u003c\/h3\u003e\n\u003cp\u003eThis model is specified as a 4-inch puller with a 4-ton rated capacity and a maximum usable range around 100 mm. It offers a jaw spread of 4 inches and a reach that extends up to roughly 4-29\/32 inches, making it suitable for many small- to medium-sized shafts and components. Note: measurements are hand-measured; verify fit for critical applications before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated capacity: 4 tons for controlled extraction\u003c\/li\u003e\n  \u003cli\u003eJaw spread: 4 in; jaw reach: up to 4-29\/32 in\u003c\/li\u003e\n  \u003cli\u003eMaximum usable range: approximately 100 mm (confirm before use)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this tool fit into my workflow and maintenance tasks?\u003c\/h3\u003e\n\u003cp\u003eBecause it ships fully assembled, you can use it immediately with standard hand tools to remove bearings, gears, pulleys, sprockets and flywheels. The compact footprint and short\/standard reach settings make it particularly useful in confined spaces where larger pullers won’t fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReady-to-use out of the package—no assembly required\u003c\/li\u003e\n  \u003cli\u003eWorks with wrench, ratchet or spanner for flexible setup\u003c\/li\u003e\n  \u003cli\u003eCompact size ideal for tight engine bays and machine housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DURATECH 4-inch 3-jaw puller is aimed at light-to-medium-duty users who need a dependable, compact extractor. It’s a practical choice for automotive hobbyists, small engine mechanics, maintenance technicians and anyone needing a corrosion-resistant, fully assembled 3-jaw solution for routine removal of gears, bearings, pulleys and similar parts. If you require higher capacities or longer reach, consider larger models; for typical garage and workshop tasks, this DURATECH unit delivers a durable, easy-to-use option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the jaws pull from inside and outside the part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The three jaws are reversible and support both internal and external grips for versatile removal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools work with this puller?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can operate the puller with a wrench, ratchet, or spanner—no special tools required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67591208304825,"sku":"B08G8TLNF5","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-3-jaw-gear-puller-front-view.jpg?v=1790543755"},{"product_id":"duratech-o2-oxygen-sensor-socket-set-5-piece-kit-with-7-8-sockets-thread-chasers-heat-treated-alloy-steel","title":"DURATECH O2 Oxygen Sensor Socket Set — 5‑Piece Kit with 7\/8\" Sockets \u0026 Thread Chasers, Heat‑Treated Alloy Steel","description":"\u003cp\u003e\u003cstrong\u003eDURATECH 5PCS O2 Oxygen Sensor Socket Set is a five-piece tool kit designed to remove, install, and service oxygen sensors and vacuum switches safely and efficiently.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact set brings together three purpose-made oxygen sensor sockets plus two thread chasers so you can tackle seized sensors, damaged threads, and awkward wiring runs without improvising. Each socket is engineered to allow the sensor wiring to pass through the tool while the slotted square drive reduces slipping on your ratchet. Constructed from heat-treated alloy steel with a phosphated finish, the set meets ANSI\/ASME quality expectations and is intended for repeated garage or roadside use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DURATECH set make sensor removal easier?\u003c\/h3\u003e\n\u003cp\u003eThe sockets have a wide wire gate so you can pull the sensor harness through the tool instead of cutting or straining the wire. Offset and long socket shapes reach sensors in tight or recessed locations and the slotted square-hole design helps maintain a secure connection to your ratchet.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2\" drive offset 7\/8\" (22mm) socket for heavy-duty ratchets\u003c\/li\u003e\n  \u003cli\u003e3\/8\" drive offset 7\/8\" (22mm) socket for standard ratchets\u003c\/li\u003e\n  \u003cli\u003e3\/8\" drive long 7\/8\" (22mm) socket for deep or recessed sensors\u003c\/li\u003e\n  \u003cli\u003eWide wire gate preserves sensor wiring during removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do the included thread chasers do and when should I use them?\u003c\/h3\u003e\n\u003cp\u003eThe M12 x 1.25mm and M18 x 1.5mm thread chasers clean, re-cut, and restore oxygen sensor threads in the exhaust bung. Use them before installing a new sensor if threads are corroded, dirty, or slightly damaged to prevent cross-threading and ensure a tight seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM12 x 1.25mm chaser fits smaller sensor bungs\u003c\/li\u003e\n  \u003cli\u003eM18 x 1.5mm chaser addresses larger exhaust threads\u003c\/li\u003e\n  \u003cli\u003eUse with a 3\/8\" ratchet for controlled re-tapping\u003c\/li\u003e\n  \u003cli\u003eRemoves rust and debris to restore proper thread engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and design features ensure durability and safety?\u003c\/h3\u003e\n\u003cp\u003eAll sockets and chasers are forged from high-quality alloy steel, then heat-treated and phosphated for corrosion resistance and extended life. The slotted square drive reduces ratchet slip while the open wire gate prevents damage to sensor leads during extraction or installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated alloy steel for strength under torque\u003c\/li\u003e\n  \u003cli\u003eSurface phosphating to resist rust and wear\u003c\/li\u003e\n  \u003cli\u003eSlotted square hole for a firmer ratchet connection\u003c\/li\u003e\n  \u003cli\u003eWire gate sized to protect sensor harnesses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and tasks is this kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe DURATECH O2 socket set is intended for most modern vehicles that use threaded oxygen sensors or vacuum switches, including heated and non-heated types. The range of socket styles and thread chasers covers common sensor sizes, making it useful for engine diagnostics, part replacement, or routine exhaust maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks on heated and non-heated oxygen sensors\u003c\/li\u003e\n  \u003cli\u003eFits many passenger cars, trucks, and light SUVs with threaded sensors\u003c\/li\u003e\n  \u003cli\u003eUseful for removing, installing, inspecting, and servicing sensors\u003c\/li\u003e\n  \u003cli\u003eSaves time compared with cutting wires or using improvised tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Mechanics, home DIYers, and fleet technicians who service exhaust systems will benefit from the DURATECH 5PCS O2 Oxygen Sensor Socket Set. If you routinely replace oxygen sensors, restore damaged threads, or need a reliable, compact set for mobile repairs, this kit supplies the commonly required socket sizes and thread chasers in a durable, workshop-ready format.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sockets fit heated oxygen sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 7\/8\" (22mm) sockets accommodate most heated and non-heated oxygen sensors used on passenger vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the thread chasers with a standard ratchet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Both the M12 and M18 thread chasers are designed to be driven with a 3\/8\" ratchet for controlled re-tapping.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67591317389497,"sku":"B0CF8MJDF8","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-packaging-o2-socket-set.jpg?v=1790547287"},{"product_id":"duratech-gasket-scraper-set-3-piece-3-4-1-1-1-2-heat-treated-drop-forged-blades","title":"DURATECH Gasket Scraper Set — 3-Piece (3\/4\", 1\", 1-1\/2\") Heat-Treated Drop-Forged Blades","description":"\u003cp\u003e\u003cstrong\u003eDURATECH's 3-piece gasket scraper set is a heat-treated, drop-forged steel toolkit with three blade widths (3\/4\", 1\", 1-1\/2\") designed to remove gasket residue quickly and reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eLightweight but robust, this set combines hardened steel edges, an oxidized finish and three sizes to tackle gasket cleanup on engines, pumps, and flanges. Each blade is forged and heat treated to resist chipping under prying pressure while the dark oxide surface reduces corrosion and makes sticky deposits easier to wipe away. The set is compact enough for a mechanic's drawer yet strong enough for repeated workshop use.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these three sizes make gasket removal easier?\u003c\/h3\u003e\n\u003cp\u003eThe different blade widths provide better access to varied sealing surfaces: narrow blades fit tight grooves while wider blades cover flat areas faster. Using the correct width reduces the risk of gouging the mating surface and improves leverage when scraping stubborn residue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4\" blade for narrow or recessed sealing faces and tight corners.\u003c\/li\u003e\n  \u003cli\u003e1\" blade as a versatile all-purpose scraper for medium surfaces.\u003c\/li\u003e\n  \u003cli\u003e1-1\/2\" blade for broad, flat surfaces to speed up larger cleanups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes DURATECH's scrapers durable compared to basic tools?\u003c\/h3\u003e\n\u003cp\u003eThese scrapers are drop forged and heat treated to achieve a harder edge that resists deformation during use. The oxidized finish helps block rust and reduces surface friction, protecting the steel between jobs and making it easier to clean off grease.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated steel for superior edge retention under pressure.\u003c\/li\u003e\n  \u003cli\u003eDrop forging enhances toughness and reduces the chance of breakage.\u003c\/li\u003e\n  \u003cli\u003eOxide coating for corrosion resistance and easier maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use these scrapers safely on engine or metal surfaces?\u003c\/h3\u003e\n\u003cp\u003eYes — when used with steady, controlled strokes the set removes gasket material without excessive gouging. Choose the smallest practical blade for confined areas and the wider blade for flat surfaces, and avoid aggressive chipping motions that could mar precision mating faces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelect blade size to match the surface and space available.\u003c\/li\u003e\n  \u003cli\u003eUse light, consistent pressure and work incrementally to avoid damage.\u003c\/li\u003e\n  \u003cli\u003eKeep blades clean and replace if excessively worn for safe performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance extends the life of these scrapers?\u003c\/h3\u003e\n\u003cp\u003eWipe blades after each use to remove solvents, grease and metal shavings; store them dry to preserve the oxidized finish. Re-hone or replace blades when the edge becomes rounded to maintain scraping efficiency and prevent additional force that could strain the tool.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean with a rag after use and lightly oil if storing long-term.\u003c\/li\u003e\n  \u003cli\u003eAvoid striking the edge on hard metal or using as a chisel.\u003c\/li\u003e\n  \u003cli\u003eReplace tools showing cracks or severe edge wear to ensure safety.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this set is for: The DURATECH 3-piece gasket scraper set suits mechanics, home DIYers, restorers and maintenance technicians who need a small, durable toolkit for engine, pump and flange gasket cleanup. If you want a compact selection of hardened scraping blades with corrosion-resistant finish and sizes that cover tight to broad surfaces, this set delivers practical value and longevity for routine repair work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the blade widths in this DURATECH set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The set includes 3\/4\", 1\", and 1-1\/2\" blades for narrow to broad surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the steel corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The scrapers have an oxidized finish to help resist rust and simplify cleaning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67591356907705,"sku":"B0B24PZ7GZ","price":62.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-gasket-scraper-set-front-view.jpg?v=1790548424"},{"product_id":"duratech-tire-spoon-tool-set-14-5-24pc-cr-v-steel-spoons-rim-protectors-valve-service-kit","title":"DURATECH Tire Spoon Tool Set 14.5\" 24PC — Cr‑V Steel Spoons, Rim Protectors \u0026 Valve Service Kit","description":"\u003cp\u003e\u003cstrong\u003eDURATECH’s 14.5\" Steel Tire Spoon Tool Set is a 24-piece tire removal and valve service kit built from Cr-V steel to make changing and servicing tires easier and safer for a wide range of wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit gathers durable 14.5-inch tire spoons, rim protectors, valve tools, spare valve cores and caps, plus a hanging storage bag — everything needed to remove, install, or service tires on motorcycles, bicycles, garden equipment, lawn mowers and other small-wheel vehicles. Each tool is designed to reduce rim damage and provide extra leverage while minimizing hand fatigue.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit make changing tires simpler?\u003c\/h3\u003e\n\u003cp\u003eThe long 14.5\" levers give more mechanical advantage than short spoons so you can pry a tire bead free with less force. Polished Cr-V steel shafts and curved tips are shaped to slide between tire and rim without pinching the inner tube.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree 14.5\" Cr-V tire spoons for staged removal and control\u003c\/li\u003e\n  \u003cli\u003eCurved, smooth edges reduce tube pinching and rim gouging\u003c\/li\u003e\n  \u003cli\u003eErgonomic PVC handles improve grip and reduce hand strain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat valve and rim protection tools are included?\u003c\/h3\u003e\n\u003cp\u003eThe set combines rim protectors with valve-specific tools so you can work on the wheel without scratching the finish and handle valve maintenance on the spot. Valve caps and spare cores are included for common replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree plastic rim protectors to shield metal surfaces during lever use\u003c\/li\u003e\n  \u003cli\u003eFour-way valve tool for core removal, stem pulling, air release and debris clearing\u003c\/li\u003e\n  \u003cli\u003eValve core wrench, six spare valve cores and ten valve caps for quick service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the material durable and corrosion resistant?\u003c\/h3\u003e\n\u003cp\u003eThe tire spoons are fabricated from chrome-vanadium (Cr-V) steel and finished with polished chrome to resist rust and withstand repeated leverage. The combination of strong metal and protective finish extends usable life when stored properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCr-V steel construction for strength under load\u003c\/li\u003e\n  \u003cli\u003ePolished chrome finish helps prevent surface corrosion\u003c\/li\u003e\n  \u003cli\u003ePVC handles resist wear and offer a comfortable grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and tasks is this kit suited for?\u003c\/h3\u003e\n\u003cp\u003eThis versatile set fits many small- to medium-wheel applications where manual bead work and valve service are needed. It’s not specialized for large commercial truck tires or high-volume shop operations, but it covers most consumer and light professional uses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMotorcycles, dirt bikes, scooters and bicycles\u003c\/li\u003e\n  \u003cli\u003eLawn mowers, garden tractors, snow blowers and small utility trailers\u003c\/li\u003e\n  \u003cli\u003eOn-the-spot valve core replacement and exterior rim protection during tire work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The DURATECH 14.5\" Steel Tire Spoon Tool Set is aimed at DIY mechanics, hobby riders, small-garage technicians and homeowners who want a durable, all-in-one kit for occasional to regular tire and valve maintenance. If you need portable, heavy-duty levers, rim protection, and valve service tools bundled together for a variety of small-wheel jobs, this kit offers a balanced mix of strength, protection and spare parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these tire spoons safe for alloy rims?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Use the included rim protectors with the steel spoons to reduce scratching on alloy wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit replace a valve core on the roadside?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a valve core wrench, four-way valve tool, spare cores and caps for roadside replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67591361757369,"sku":"B0FJQK4LSH","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-packaging-and-tools.jpg?v=1790548590"},{"product_id":"duratech-push-pin-pliers-set-30-80-offset-jaws-spring-loaded-ergonomic-handles","title":"DURATECH Push Pin Pliers Set — 30° + 80° Offset Jaws, Spring-Loaded Ergonomic Handles","description":"\u003cstrong\u003eDURATECH Push Pin Pliers Set includes two spring-loaded tools with 30° and 80° offset jaws to remove automotive push pins and plastic clips without damage.\u003c\/strong\u003e\n\n\u003cp\u003eWhether you’re working on door panels, bumpers, or interior trim, the DURATECH Push Pin Pliers Set gives you controlled access to stubborn plastic fasteners. The pair of pliers — one with a shallow 30° curve and the other with a steep 80° offset — lets you reach clips at varying depths and angles, while the spring-loaded handles reduce hand strain. Built to resist corrosion and everyday wear, these tools are designed for repeated use in garages, workshops, and home toolboxes.\u003c\/p\u003e\n\n\u003ch3\u003eHow do the two jaw angles make clip removal easier?\u003c\/h3\u003e\n\u003cp\u003eThe set includes both a 30° curved jaw and an 80° offset jaw so you can match the tool to the fastener’s position and surrounding geometry. The 30° jaw is ideal for clips near flat surfaces or shallow recesses, while the 80° jaw reaches deep or obstructed fasteners without forcing panels. Using the correct angle prevents prying against painted surfaces and minimizes the risk of breaking brittle plastic clips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30° jaw: access low-profile clips on panels and trim edges\u003c\/li\u003e\n  \u003cli\u003e80° jaw: reach recessed or awkwardly angled fasteners\u003c\/li\u003e\n  \u003cli\u003eCurved tips: grip pins securely without slipping\u003c\/li\u003e\n  \u003cli\u003eReduced panel leverage: less chance of denting or scratching\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the spring-loaded design reduce hand fatigue?\u003c\/h3\u003e\n\u003cp\u003eBoth pliers feature a built-in spring mechanism that opens the jaws automatically between squeezes, so you only need a natural squeeze to operate the tool. That action cuts down repetitive strain during multiple clip removals and helps maintain a consistent grip strength. Professionals and hobbyists will notice faster cycles and steadier control compared with non-sprung tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAuto-open spring: faster one-handed operation\u003c\/li\u003e\n  \u003cli\u003eErgonomic handles: improved comfort for extended jobs\u003c\/li\u003e\n  \u003cli\u003eSmoother cycles: fewer grip adjustments needed\u003c\/li\u003e\n  \u003cli\u003eConsistent force: reduces accidental slips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these pliers hold up in a workshop environment?\u003c\/h3\u003e\n\u003cp\u003eThe DURATECH push pin pliers are manufactured from durable materials with a protective plastic coating to resist rust and everyday wear. Their finish helps them withstand exposure to shop humidity and common automotive fluids, extending usable life. The robust construction makes them suitable for both occasional DIY tasks and regular professional use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant coating: longer tool lifespan\u003c\/li\u003e\n  \u003cli\u003eSolid jaw construction: resists bending and wear\u003c\/li\u003e\n  \u003cli\u003eEasy-to-clean surfaces: maintain tool performance\u003c\/li\u003e\n  \u003cli\u003eReliable for repetitive automotive tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat jobs and materials can these pliers handle?\u003c\/h3\u003e\n\u003cp\u003eThese pliers are designed primarily for removing push pins, plastic clips, and similar fasteners used in automotive trim, body panels, and interiors. They also work well for upholstery fasteners, plastic rivets, and some quick-connect fittings where a gentle, controlled pull is needed. While optimized for automotive use, they’re handy for many household and hobby projects involving fragile plastic pins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive trim panels and bumper clips\u003c\/li\u003e\n  \u003cli\u003eInterior door panels and upholstery clips\u003c\/li\u003e\n  \u003cli\u003ePlastic rivets and small fasteners\u003c\/li\u003e\n  \u003cli\u003eDIY projects that require non-destructive clip removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DURATECH Push Pin Pliers Set is aimed at mechanics, restoration hobbyists, and homeowners who need a reliable, low-effort way to remove trim clips without damaging surfaces. If you frequently work on vehicles, install or remove interior panels, or perform upholstery repairs, this compact, durable set gives you the right angles and the comfort-enhancing spring action to do the job faster and cleaner.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these pliers safe for painted panels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The curved jaws and controlled pull reduce pressure points, helping prevent scratches or dents when used properly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the pliers come as a set with both angles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set includes one 30° curved jaw plier and one 80° offset jaw plier for versatile access.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67592961261753,"sku":"B0DDP5FNJB","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-push-pin-pliers-front-view.jpg?v=1790570222"},{"product_id":"duratech-adjustable-oil-filter-wrench-2-3-8-3-1-8-60-80mm-1-2-drive-spring-loaded-carbon-steel","title":"DURATECH Adjustable Oil Filter Wrench 2-3\/8\"–3-1\/8\" (60–80mm) 1\/2\" Drive, Spring-Loaded Carbon Steel","description":"\u003cp\u003e\u003cstrong\u003eThe DURATECH Universal Adjustable Oil Filter Wrench is a compact, spring-loaded 1\/2\"-drive tool that grips and turns spin-on oil filters 2-3\/8\" to 3-1\/8\" (60–80 mm) in diameter for easy removal and installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis adjustable oil filter wrench is built to simplify routine oil changes and maintenance on cars, SUVs, light trucks and motorcycles. Its multi-tooth jaws and spring-loaded mechanism maintain consistent pressure on small to medium spin-on filters, while carbon steel construction and a black-oxide finish resist wear and corrosion. The wrench fits standard 1\/2\" ratchets and torque wrenches and is sized to move in tight engine bays while providing a secure grip on stubborn filters.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DURATECH wrench adapt to different filter sizes?\u003c\/h3\u003e\n\u003cp\u003eThe wrench uses a manually adjustable jaw span and spring-loaded action to fit filters between 2-3\/8\" and 3-1\/8\" (60–80 mm). Once opened to the approximate diameter, rotating past center engages the gripping teeth so the tool bites into the filter for positive traction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable range: 2-3\/8\"–3-1\/8\" (60–80 mm)\u003c\/li\u003e\n  \u003cli\u003eSpring-loaded jaws maintain continuous clamping pressure\u003c\/li\u003e\n  \u003cli\u003eMulti-tooth jaw profile prevents slipping on oily surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this wrench work with my ratchet or torque wrench?\u003c\/h3\u003e\n\u003cp\u003eThe DURATECH wrench has a 1\/2\" drive opening that accepts most standard ratchets, impact drivers, and torque wrenches, making it compatible with common garage tools. Use the drive tool to apply controlled torque; recommended maximum torque is 90 N·m to protect the wrench and filter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrive size: 1\/2\" compatible with common ratchets\u003c\/li\u003e\n  \u003cli\u003eMaximum recommended torque: 90 N·m\u003c\/li\u003e\n  \u003cli\u003eWorks with torque wrenches for accurate filter installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction ensure durability?\u003c\/h3\u003e\n\u003cp\u003eDurability comes from carbon steel components and heat-treated jaws finished with manganese phosphate black-oxide for corrosion resistance. The jaws are hardened to 42–45 HRC for lasting gripping performance during repeated service tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon steel body for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eJaws heat-treated to 42–45 HRC for reliable bite\u003c\/li\u003e\n  \u003cli\u003eManganese phosphate black-oxide finish resists rust and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I set up and use the wrench correctly?\u003c\/h3\u003e\n\u003cp\u003eOpen the wrench to the filter diameter, place it over the filter, and rotate past the center position in the removal direction (counterclockwise) to engage the gripping mechanism. For installation, rotate clockwise past center so the jaws hold while you tighten; the spring-loaded design keeps continuous contact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOpen to size, seat over filter, rotate past center to engage\u003c\/li\u003e\n  \u003cli\u003eCounterclockwise past center for removal; clockwise for installation\u003c\/li\u003e\n  \u003cli\u003eCompact 2.8\" × 2.4\" × 2.6\" body fits tight spaces and stores easily\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The DURATECH Universal Adjustable Oil Filter Wrench suits DIYers, home mechanics, and professional technicians who service small to medium spin-on oil filters and need a compact, dependable tool. It’s particularly useful when working in confined engine bays or when replacing multiple filters that fall within the 60–80 mm range. Confirm your filter diameter and keep torque below 90 N·m to get consistent, damage-free results with this durable, heat-treated, spring-loaded wrench.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What filter sizes does this wrench fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits spin-on oil filters 2-3\/8\" to 3-1\/8\" (60–80 mm) in diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What drive size and torque are supported?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The wrench accepts a 1\/2\" drive; recommended maximum torque is 90 N·m.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67593139454137,"sku":"B0GDZ9SKSL","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-view-wrench.jpg?v=1790572288"},{"product_id":"duratech-12-inch-oil-filter-pliers-3-jaw-adjustable-wrench-set-heavy-duty-rust-resistant","title":"DURATECH 12-Inch Oil Filter Pliers \u0026 3-Jaw Adjustable Wrench Set — Heavy-Duty, Rust-Resistant","description":"\u003cp\u003e\u003cstrong\u003eDURATECH's 12-inch oil filter pliers and 3-jaw adjustable oil filter wrench are a matched heavy-duty set built to grip, reach, and remove most car oil filters with reliable leverage and corrosion-resistant durability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis paired toolkit combines a long-handled, serrated-jaw plier with a three-jaw adjustable wrench so you can tackle stuck, oily, or hard-to-reach filters without improvising. Both tools are forged from heat-treated steel and finished to resist rust, giving you solid torque and a comfortable, slip-resistant grip. The set covers a broad range of filter diameters and fits common ratchet driver sizes, making it a practical addition to home garages and professional bays.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these tools help remove stuck or oily filters?\u003c\/h3\u003e\n\u003cp\u003eThe serrated 12-inch pliers provide extra reach and bite for filters in tight engine bays, while the 3-jaw wrench self-centers and clamps smooth, oil-covered housings. Use the pliers when you need leverage and access; use the wrench when you need a secure, even grip around the filter circumference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-inch handles increase torque and reach into cramped spaces.\u003c\/li\u003e\n  \u003cli\u003eSerrated teeth on pliers prevent slipping on oily surfaces.\u003c\/li\u003e\n  \u003cli\u003e3-jaw design adapts and centers across 63–103 mm diameters.\u003c\/li\u003e\n  \u003cli\u003eAccepts 3\/8\" or 1\/2\" ratchet drive for controlled turning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes keep these tools reliable over time?\u003c\/h3\u003e\n\u003cp\u003eBoth tools are forged from hardened, heat-treated steel to resist bending under heavy torque. After forging they receive a rust-resistant finish that helps maintain function and appearance even after repeated exposure to oil and shop fluids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-forged steel construction for high hardness and strength.\u003c\/li\u003e\n  \u003cli\u003eHeat treatment increases wear resistance under torque loads.\u003c\/li\u003e\n  \u003cli\u003eRust-resistant surface finish for longer service life.\u003c\/li\u003e\n  \u003cli\u003eDurable handles designed for repeated use in harsh conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich filter sizes and vehicles will this set fit?\u003c\/h3\u003e\n\u003cp\u003eThe 3-jaw wrench automatically adjusts to a wide diameter range, while the pliers provide a universal clamping solution for irregular or damaged filters. Together they cover most common automotive and light truck oil filter sizes and many small-engine filters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3-jaw wrench fits filters roughly 63–103 mm in diameter.\u003c\/li\u003e\n  \u003cli\u003ePliers work on irregular, dented, or uniquely shaped housings.\u003c\/li\u003e\n  \u003cli\u003eRecommended for most passenger cars, light trucks, and common engine types.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 3\/8\" or 1\/2\" ratchet handle on the wrench (ratchet not included).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use each tool safely and effectively?\u003c\/h3\u003e\n\u003cp\u003ePosition the three jaws evenly around the filter, attach a ratchet drive, and apply steady torque to avoid sudden slips. For the pliers, center the serrated jaws on the filter, hold the handle firmly and use controlled leverage—avoid overextension in confined spaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsure engine is cool and drain oil before removing the filter.\u003c\/li\u003e\n  \u003cli\u003eUse steady, even force with a ratchet on the 3-jaw wrench to prevent damage.\u003c\/li\u003e\n  \u003cli\u003eGrip with both hands on the pliers for controlled leverage in tight bays.\u003c\/li\u003e\n  \u003cli\u003eInspect jaws for oil and debris; clean after use to maintain grip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DURATECH 12-inch oil filter pliers and 3-jaw adjustable wrench set is aimed at DIY mechanics, mobile technicians, and professional shops that need dependable, adaptable tools for routine oil changes and stubborn filter removals. If you work on passenger cars, light trucks, ATVs, or small engines and want robust, long-lasting hand tools to simplify maintenance, this set addresses most common filter removal challenges without requiring specialty adapters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the 3-jaw wrench fit my oil filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The 3-jaw wrench fits most filters between 63 and 103 mm in diameter. Measure your filter to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the pliers on oily or damaged filters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The serrated jaws are designed to grip oily or dented filters for safer, easier removal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67593774956729,"sku":"B08HVNB4YN","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-packaging-and-tools_651f6cf9-985a-434a-9cc9-4e7d698c8baa.jpg?v=1790578520"},{"product_id":"duratech-exhaust-hanger-removal-pliers-offset-head-heavy-duty-high-carbon-steel","title":"DURATECH Exhaust Hanger Removal Pliers - Offset Head Heavy-Duty, High-Carbon Steel","description":"\u003cp\u003e\u003cstrong\u003eThe DURATECH Exhaust Hanger Removal Tool is a heavy-duty, offset-head plier designed to remove rubber exhaust hangers quickly and safely in tight undercarriage spaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you work on mufflers, tailpipes, catalytic converters or routine exhaust repairs, having the right removal tool speeds the job and reduces risk to nearby components. These DURATECH pliers are forged from high-carbon steel, finished with a rust-resistant coating, and shaped with an angled jaw and squeeze-to-release action so you can detach stubborn rubber hangers without bending pipe or tearing hangers unnecessarily.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these pliers make exhaust hanger removal easier?\u003c\/h3\u003e\n\u003cp\u003eThe narrow, offset jaws reach into cramped areas where straight tools can’t, and the pliers’ pin design engages the hanger rod to pop the rubber off with a simple squeeze. Ergonomic handles give you firm control so you can work precisely and with less hand fatigue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOffset head accesses tight undercarriage locations\u003c\/li\u003e\n  \u003cli\u003eSqueeze-to-release mechanism removes hangers quickly\u003c\/li\u003e\n  \u003cli\u003ePin engagement prevents slippage and damage\u003c\/li\u003e\n  \u003cli\u003eNon-slip dipped handles improve control and comfort\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this tool last through repeated professional use?\u003c\/h3\u003e\n\u003cp\u003eYes—these pliers are built for durability. Forged from high-quality carbon steel and finished with a black electrophoretic, rust-resistant coating, the tool resists bending and corrosion during repeated garage or shop work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-carbon steel construction for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eElectrophoretic rust-resistant finish for corrosion protection\u003c\/li\u003e\n  \u003cli\u003eForged design reduces risk of handle or jaw failure\u003c\/li\u003e\n  \u003cli\u003eDesigned for both professional and DIY workloads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these pliers compatible with my vehicle’s exhaust system?\u003c\/h3\u003e\n\u003cp\u003eThey are compatible with most cars and trucks that use rubber hanger mounts. The pliers are intended for common service tasks—muffler replacement, hanger removal during exhaust or converter work, and general tailpipe servicing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks on rubber hangers used across many vehicle makes and models\u003c\/li\u003e\n  \u003cli\u003eSuitable for muffler, tailpipe, and catalytic converter service\u003c\/li\u003e\n  \u003cli\u003eHelpful for aftermarket and OEM hanger styles with standard rods\u003c\/li\u003e\n  \u003cli\u003eNot intended for non-rubber or specialty mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the DURATECH exhaust hanger pliers safely?\u003c\/h3\u003e\n\u003cp\u003ePosition the angled jaws around the rubber hanger, align the pliers’ pin with the hanger rod, then squeeze the handles to release the rubber from the mount. Support the exhaust if needed to prevent sudden movement and wear appropriate eye and hand protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClamp jaws onto the rubber hanger before engaging the pin\u003c\/li\u003e\n  \u003cli\u003eUse steady, controlled pressure to avoid slip-offs\u003c\/li\u003e\n  \u003cli\u003eSupport the exhaust to prevent strain on other mounts\u003c\/li\u003e\n  \u003cli\u003eWear gloves and eye protection when working under vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The DURATECH Exhaust Hanger Removal Tool is made for mechanics, mobile technicians, and hands-on vehicle owners who need a rugged, compact plier to remove rubber hangers quickly and safely. It's ideal for professional shops handling regular exhaust service and for DIY enthusiasts tackling muffler or tailpipe jobs in a home garage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these pliers remove hangers on trucks as well as cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The DURATECH pliers are compatible with most car and truck rubber hangers used in common exhaust systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the finish corrosion-resistant for outdoor storage?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The black electrophoretic coating provides rust resistance for typical shop and garage environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67593928671417,"sku":"B0FWQ182S4","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-view-exhaust-hanger-pliers.jpg?v=1790580845"},{"product_id":"duratech-3-jaw-adjustable-oil-filter-wrench-3-5-51-76-140mm-high-carbon-steel-magnetic-auto-lock","title":"DURATECH 3-Jaw Adjustable Oil Filter Wrench 3\"–5.51\" (76–140mm) — High-Carbon Steel, Magnetic Auto-Lock","description":"\u003cp\u003e\u003cstrong\u003eThe DURATECH 3-jaw adjustable oil filter wrench is a heavy-duty, magnetic three-jaw tool that grips and removes spin-on oil filters from 3\" to 5.51\" (76–140mm) using 3\/8\" or 1\/2\" drive ratchets.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis adjustable wrench is built for mechanics and DIYers who need a single, reliable tool to tackle a broad range of spin-on oil filters. Constructed from high-carbon steel with a protective powder coat, it combines a wide jaw range, knurled teeth for bite, a two-way auto-lock mechanism, and a magnetic base to hold filters securely during removal. An included drive adapter expands compatibility with common ratchet sizes so you can work faster and with less fumbling under the vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the three-jaw design improve filter removal?\u003c\/h3\u003e\n\u003cp\u003eThe three jaws clamp evenly around the filter, delivering balanced pressure that reduces slipping and the risk of deforming the canister. Each jaw’s knurled surface increases friction against smooth or oily filters so the wrench maintains hold even in greasy conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree simultaneous contact points for even torque distribution\u003c\/li\u003e\n  \u003cli\u003eKnurled jaw faces to resist slipping on oily surfaces\u003c\/li\u003e\n  \u003cli\u003eAdjusts across the full 76–140mm diameter range for many filter types\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my ratchet and the filters on my vehicles?\u003c\/h3\u003e\n\u003cp\u003eThe tool accepts both 3\/8\" and 1\/2\" drive inputs via the supplied adapter, so it works with most standard ratchets and breaker bars. Its adjustable range covers the common sizes of spin-on filters used on cars, trucks, motorcycles and small commercial engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded adapter converts between 3\/8\" and 1\/2\" drives\u003c\/li\u003e\n  \u003cli\u003eSize coverage from 3\" (76mm) up to 5.51\" (140mm)\u003c\/li\u003e\n  \u003cli\u003eSuits passenger cars, light trucks, motorcycles, and many service applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features increase durability and ease of use?\u003c\/h3\u003e\n\u003cp\u003eHigh-carbon steel construction and a powder-coated finish protect the tool from wear and corrosion for longer service life. A two-way automatic locking action lets you both loosen and hold filters without needing extra hands, while the magnetic base helps keep the filter in place during extraction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust high-carbon steel body for long-term durability\u003c\/li\u003e\n  \u003cli\u003ePowder coat resists chipping and rust in workshop environments\u003c\/li\u003e\n  \u003cli\u003eBuilt-in magnets hold the filter to prevent drops during removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the auto-lock help prevent damage?\u003c\/h3\u003e\n\u003cp\u003eThe 2-way auto-lock secures jaws to the filter so you can apply turning force without the wrench slipping off and scuffing the filter’s threads. This mechanism reduces the chance of rounding the canister edge and makes it safer to remove stubborn, over-tightened filters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAuto-lock holds jaws tight while loosening or tightening\u003c\/li\u003e\n  \u003cli\u003eLess risk of stripping filter threads or deforming the body\u003c\/li\u003e\n  \u003cli\u003eSimplifies one-person operation in cramped spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you perform routine oil changes on a variety of vehicles—whether you’re a professional technician, a mobile mechanic, or a hands-on vehicle owner—the DURATECH 3-jaw adjustable oil filter wrench replaces multiple single-size tools and cuts the time spent fighting stuck filters. It’s especially useful in home garages and busy shops where durability, adaptability, and a secure grip matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What filter sizes does this wrench fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits spin-on oil filters from 3\" (76mm) up to 5.51\" (140mm).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it work with my ratchet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes an adapter for use with both 3\/8\" and 1\/2\" drive ratchets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67593941385401,"sku":"B0CKPBRB8D","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-view-wrench_44a6a235-f465-4953-8288-cc8628b96ceb.jpg?v=1790580913"},{"product_id":"duratech-seal-puller-dual-tip-with-extra-blade-heat-treated-steel-chrome-plated-handle-for-automotive-seals","title":"DURATECH seal puller dual-tip with extra blade — heat-treated steel, chrome-plated handle for automotive seals","description":"\u003cp\u003e\u003cstrong\u003eDURATECH Seal Puller with Extra Blade is a dual-tip, heat-treated steel tool designed to remove stubborn seals and gaskets quickly and safely, and it ships with an extra replacement blade so you’re ready for the next job.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re a DIY mechanic or a professional technician, this seal puller pairs hardened steel construction with corrosion-resistant plating and a rugged handle to make seal removal faster and cleaner. The tool includes two differently sized hooked tips to reach seals in tight locations, plus a spare blade so you won’t lose time hunting for replacements. Chrome plating protects the body from rust and grease buildup, and the handle material resists distortion for reliable leverage during repeated use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the dual-tip design make seal removal easier?\u003c\/h3\u003e\n\u003cp\u003eThe two hook sizes let you choose the best angle and contact point for different seals, from thin lip seals to larger axle and transmission seals. Switching between tips helps you avoid damaging the housing or surrounding components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo hook sizes for versatile reach and leverage\u003c\/li\u003e\n  \u003cli\u003eCurved tips lift seals without tearing mounting surfaces\u003c\/li\u003e\n  \u003cli\u003eNarrow tip reaches recessed seals; wider tip gives more surface contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the blade and steel construction durable?\u003c\/h3\u003e\n\u003cp\u003eThe puller is crafted from heat-treated steel that increases hardness and wear resistance, extending service life under repeated use. A chrome-plated surface prevents rust and keeps debris from bonding to the tool, making cleanup fast and keeping performance consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated steel for improved hardness and longevity\u003c\/li\u003e\n  \u003cli\u003eChrome plating resists corrosion and simplifies cleaning\u003c\/li\u003e\n  \u003cli\u003eReplacement blade included to maintain cutting performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow comfortable and practical is the handle during heavy jobs?\u003c\/h3\u003e\n\u003cp\u003eThe handle is made from a durable material that resists distortion and provides predictable control when prying stubborn seals. Its finish wipes clean easily, preventing grease buildup and maintaining grip and hygiene on the job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable handle material that resists bending and wear\u003c\/li\u003e\n  \u003cli\u003eSmooth finishing for easy removal of oil and grime\u003c\/li\u003e\n  \u003cli\u003eErgonomic length offers better leverage for tough pull-outs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and jobs is this seal puller best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis tool is ideal for routine seal removal on light trucks, cars, and SUVs—everywhere you need controlled prying to extract oil, axle, or transmission seals without damaging housings. It’s compact enough for garage use yet durable enough for shop bench work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks on automotive axle, transmission, and engine seals\u003c\/li\u003e\n  \u003cli\u003eCompact design fits tight engine bays and wheel housings\u003c\/li\u003e\n  \u003cli\u003eIncludes spare blade so teams or DIYers keep working without delay\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DURATECH Seal Puller with Extra Blade is built for DIY enthusiasts, home mechanics, and professional technicians who need a dependable, corrosion-resistant seal removal tool that covers multiple seal sizes. If you want a single, long-lasting tool that reduces the risk of housing damage and arrives ready-to-use with an extra blade, this pack is a practical addition to any automotive toolkit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the DURATECH Seal Puller come with replacement parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes one extra blade so you can swap in a fresh cutting edge immediately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this tool reach seals in tight engine bays?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the two different hook tip sizes are designed to access recessed or confined seal locations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67594070491321,"sku":"B0B24NJ99B","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-seal-puller-front-view.jpg?v=1790581559"},{"product_id":"duratech-3-inch-3-jaw-gear-puller-cr-v-steel-fully-assembled-3-ton-capacity","title":"DURATECH 3-Inch 3-Jaw Gear Puller — Cr-V Steel, Fully Assembled, 3-Ton Capacity","description":"\u003cp\u003e\u003cstrong\u003eThe DURATECH 3-Inch 3-Jaw Gear Puller is a ready-to-use, heavy-duty Cr-V steel removal tool designed to extract gears, bearings, pulleys and flywheels safely and precisely.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from drop-forged chromium-vanadium steel with heat-treated jaws and corrosion-resistant finishes, this 3-jaw puller arrives fully assembled so you can begin work immediately. Its compact 3\" jaw spread and 3-9\/16\" reach suit tight workspaces while the reversible, interchangeable jaws adapt to inside or outside pulls. The puller balances force across three contact points for a non-slip grip that helps minimize damage to parts during disassembly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the DURATECH puller protect gears and bearings during removal?\u003c\/h3\u003e\n\u003cp\u003eThe 3-jaw configuration distributes pulling force evenly to avoid concentrated pressure that can deform parts. Precisely machined claws and the option to reverse or interchange jaws let you match the tool to the component shape and pull direction for a safer extraction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-point gripping reduces lateral stress and wobble on shafts.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated Cr-V jaws resist bending under load.\u003c\/li\u003e\n  \u003cli\u003eFine chrome plating and black phosphatized screw resist corrosion over time.\u003c\/li\u003e\n  \u003cli\u003eReversible jaws enable inside or outside pulls without extra tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and loads can I handle with this 3-inch puller?\u003c\/h3\u003e\n\u003cp\u003eThis model features a 3-inch jaw spread, 3-9\/16-inch reach, and a maximum recommended use range of 75 mm. It’s rated for a 3-ton pulling capacity, suitable for most light- to medium-duty automotive and workshop tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJaw spread: 3 inches for compact grips.\u003c\/li\u003e\n  \u003cli\u003eJaw reach: 3-9\/16 inches to access recessed parts.\u003c\/li\u003e\n  \u003cli\u003eMaximum effective diameter: 75 mm for common pulleys and bearings.\u003c\/li\u003e\n  \u003cli\u003ePuller capacity: 3 tons (mechanical leverage, not hydraulic).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the finish and construction improve longevity?\u003c\/h3\u003e\n\u003cp\u003eThe puller uses drop-forged Cr-V steel and heat treatment on the jaws to enhance strength and wear resistance. Chrome-plated jaws and a black-phosphatized drive screw provide corrosion protection so the tool keeps precise engagement after repeated use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-forged Cr-V steel for core toughness.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated jaws to resist deformation under load.\u003c\/li\u003e\n  \u003cli\u003eChrome-plated surfaces fend off rust where the jaws grip parts.\u003c\/li\u003e\n  \u003cli\u003ePhosphatized drive screw reduces galling and extends service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this puller for different types of removal jobs?\u003c\/h3\u003e\n\u003cp\u003eYes — the DURATECH 3-jaw puller is designed for a range of tasks, including gear, pulley, sprocket, bearing, and flywheel removal. Its jaw geometry and the ability to flip and reposition each jaw make it versatile for inside and outside extractions on various shapes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with wrenches, ratchets, or spanners for manual pulling.\u003c\/li\u003e\n  \u003cli\u003eInterchangeable jaws adapt to irregular or cylindrical parts.\u003c\/li\u003e\n  \u003cli\u003eSuitable for tight engine bays and confined workshop locations.\u003c\/li\u003e\n  \u003cli\u003eFully assembled for immediate use—no additional assembly required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The DURATECH 3-Inch 3-Jaw Gear Puller is aimed at home mechanics, small repair shops, maintenance technicians, and DIYers who need a dependable, compact puller for light- to medium-duty removal tasks. If you work on small engines, motorcycles, lawn equipment, transmissions, or general machinery where precise, controlled extraction matters, this puller gives you a durable, corrosion-resistant option that’s ready to use straight from the toolbox.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the DURATECH puller ready to use out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it comes fully assembled so you can start pulling parts immediately with your wrench or ratchet.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this puller do both inside and outside pulls?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, each jaw is reversible and can be repositioned to handle inside or outside extraction tasks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67594196418745,"sku":"B08G8SR4XV","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-view-assembled-puller.jpg?v=1790582224"},{"product_id":"duratech-14mm-swivel-magnetic-spark-plug-socket-3-8-drive-360-swivel-thin-wall-12-point","title":"DURATECH 14mm Swivel Magnetic Spark Plug Socket — 3\/8\" Drive, 360° Swivel, Thin-Wall 12-Point","description":"\u003cp\u003e\u003cstrong\u003eThe DURATECH 14mm Swivel Magnetic Spark Plug Socket is a 3\/8\"-drive, 12-point thin-wall tool with a 360° swivel and powerful magnetic core designed to safely grip and release spark plugs in tight engine bays.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen working on modern engines, limited space and fragile ceramic spark plugs make removal and installation tricky. This DURATECH socket combines a rotating joint, a strong magnet and thin-wall 12-point geometry to improve access, reduce plug drops and deliver more reliable torque transfer. Built from heat-treated CR-V steel with a manganese phosphate finish and laser-etched size marking, it’s engineered for repeated garage or shop use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 360° swivel help in cramped engine compartments?\u003c\/h3\u003e\n\u003cp\u003eThe swivel joint lets you approach plugs from difficult angles without forcing the ratchet or extensions into awkward positions. It reduces strain on the socket and plug by permitting alignment before you apply torque, making installations and removals smoother.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull 360° rotation for angled access\u003c\/li\u003e\n\u003cli\u003eReduces risk of cross-threading by enabling gentle alignment\u003c\/li\u003e\n\u003cli\u003eWorks well with extensions and universal joints in tight bays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the magnetic core prevent plugs from falling into the engine?\u003c\/h3\u003e\n\u003cp\u003eYes — the heavy-duty magnetic core holds the plug firmly during removal and insertion so it won’t drop into the cylinder head. That stability saves time and eliminates the need to fish out fallen plugs, which can damage ceramic tips.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrong magnet secures plug during extraction and placement\u003c\/li\u003e\n\u003cli\u003eBuilt-in rubber sleeve protects ceramic insulators\u003c\/li\u003e\n\u003cli\u003eMinimizes interruptions from dropped hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose a 12-point thin-wall design over a 6-point socket?\u003c\/h3\u003e\n\u003cp\u003eThe 12-point layout lets you engage hex surfaces more quickly in tight clearances and offers multiple entry angles for faster work. The thin-wall profile maintains strength while fitting into narrower spark plug wells where standard sockets can’t reach.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12-point geometry for quicker, easier alignment\u003c\/li\u003e\n\u003cli\u003eThin-wall construction for narrow access points\u003c\/li\u003e\n\u003cli\u003eImproved torque transfer with less risk of rounding corners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this socket durable and compatible with standard tools?\u003c\/h3\u003e\n\u003cp\u003eConstructed from heat-treated CR-V steel and finished with manganese phosphate, the socket resists wear and corrosion for long service life. It accepts standard 3\/8\" drive ratchets and extensions, and laser-etched size markings make identification fast in a busy toolbox.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeat-treated CR-V steel for toughness and longevity\u003c\/li\u003e\n\u003cli\u003eManganese phosphate coating reduces rust and eases cleaning\u003c\/li\u003e\n\u003cli\u003e3\/8\" drive fits common ratchets, extensions, and breaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Mechanics, home DIYers and automotive technicians who regularly service spark plugs will benefit from the DURATECH 14mm swivel magnetic socket. It’s especially useful for work on modern compact engines, vehicles with recessed spark plugs, or any situation where protecting ceramic plugs and maintaining steady grip matters. If you need a dependable, space-saving socket that reduces dropped plugs and improves access, this tool is built for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What drive size fits this DURATECH spark plug socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses a standard 3\/8-inch drive compatible with most ratchets and extensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it protect ceramic spark plug tips?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The tool has a rubber protective sleeve plus a magnetic core to secure and protect the plug.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67594715529401,"sku":"B0DC5VMGML","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-view-14mm-socket.jpg?v=1790584932"},{"product_id":"duratech-5-8-swivel-magnetic-spark-plug-socket-3-8-drive-360-swivel-thin-wall-12-point","title":"DURATECH 5\/8\" Swivel Magnetic Spark Plug Socket — 3\/8\" Drive, 360° Swivel, Thin-Wall 12-Point","description":"\u003cp\u003e\u003cstrong\u003eThe DURATECH 5\/8\" Swivel Magnetic Spark Plug Socket is a heavy-duty, 3\/8\"-drive tool with a 360° swivel joint and powerful magnetic core made from heat-treated CR-V steel for secure, easy spark plug removal in tight engine bays.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for mechanics and DIYers who work in cramped engine compartments, this socket combines a 12-point thin-wall profile, a strong magnetic insert, and a rotating joint so you can extract and install spark plugs with less fumbling and fewer dropped parts. The manganese-phosphate black finish resists corrosion and keeps the tool readable with laser-etched size markings.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 360° swivel joint improve access to spark plugs?\u003c\/h3\u003e\n\u003cp\u003eThe swivel joint rotates freely to let the socket approach plugs at awkward angles, which is especially useful where straight-line access is blocked by engine components. That flexibility reduces the need to dismantle surrounding parts and speeds up the job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e360° rotating joint for angled approaches and better reach\u003c\/li\u003e\n  \u003cli\u003eBuilt-in rubber cover protects delicate ceramic plug insulators\u003c\/li\u003e\n  \u003cli\u003eLess disassembly required in tight engine bays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the magnetic core prevent dropped spark plugs during removal?\u003c\/h3\u003e\n\u003cp\u003eYes—the heavy-duty magnetic core holds the spark plug securely to the socket head during extraction and installation, minimizing the risk of dropping a plug into the engine. This magnetic retention keeps fragile ceramic and electrode areas protected until you can set the plug down safely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStrong magnet secures plugs to prevent drops\u003c\/li\u003e\n  \u003cli\u003eStable hold during angled or extended pulls\u003c\/li\u003e\n  \u003cli\u003eReduces interruptions and potential engine damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose a 12-point thin-wall socket over a standard socket?\u003c\/h3\u003e\n\u003cp\u003eThe 12-point geometry engages hex heads quickly and offers more contact points in tight clearances, while the thin-wall profile lets the socket fit where bulkier sockets won't. Together they deliver precise torque transfer with less chance of rounding off plug hexes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-point design for faster engagement in tight spaces\u003c\/li\u003e\n  \u003cli\u003eThin-wall construction to fit narrow openings and long studs\u003c\/li\u003e\n  \u003cli\u003eImproved torque distribution and reduced rounding risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this socket compatible with common ratchets and how durable is the finish?\u003c\/h3\u003e\n\u003cp\u003eThe DURATECH socket uses a standard 3\/8\" drive so it works with most ratchets and extension bars used in automotive work. Constructed from heat-treated CR-V steel with a manganese phosphate black coating, it resists wear and corrosion and stays readable thanks to laser-etched size markings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8\" drive fits standard ratchets and extensions\u003c\/li\u003e\n  \u003cli\u003eKnurled grip on the socket body improves manual handling\u003c\/li\u003e\n  \u003cli\u003eHeat-treated CR-V steel and protective black finish resist corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technicians, hobbyists, and anyone servicing engines with limited access will appreciate the DURATECH 5\/8\" Swivel Magnetic Spark Plug Socket. It’s designed for jobs where a secure hold, angled reach, and compact socket profile save time and reduce mistakes—ideal for passenger cars, light trucks, small engines, and anyone who prefers a durable, easy-to-handle spark plug tool.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size spark plugs does this socket fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The socket is 5\/8\" (16 mm) and fits standard 5\/8\" spark plug hex sizes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this with extensions and ratchets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the socket has a 3\/8\" drive compatible with most ratchets and extension bars.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DURATECH","offers":[{"title":"Default Title","offer_id":67594715791545,"sku":"B0DC5TH77F","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/duratech-front-facing-socket.jpg?v=1790584933"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/duratech-front-facing-socket.jpg?v=1790612698","url":"https:\/\/redleafauto.ca\/collections\/duratech.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}