{"title":"EVIL ENERGY","description":"\u003cp\u003eBrowse 456 EVIL ENERGY products at RedLeaf Auto, including belts, hoses \u0026amp; pulleys, fuel system parts and exhaust \u0026amp; emissions parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"evil-energy-fuel-injection-hose-5-16-sae-30r9-25-ft-300-psi-fkm-inner-for-ethanol-diesel-resistance","title":"EVIL ENERGY fuel injection hose 5\/16\" SAE 30R9 — 25 ft, 300 PSI FKM inner for ethanol \u0026 diesel resistance","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 5\/16\" SAE 30R9 fuel injection hose is a 25-foot, high-temperature, 300 PSI-rated FKM\/ECO hose engineered for modern fuel systems including ethanol blends and diesel.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis fuel injection line is built to the SAE J30R9 specification for reliable service in high-pressure fuel systems, LS swaps, fuel pumps, filters, tanks and vapor management. With a fluorine rubber inner tube and epichlorohydrin cover reinforced by aramid fiber, the hose balances chemical resistance and abrasion protection while remaining flexible across a wide temperature range. It’s designed to accept common fuel types such as gasoline, E10–E85, biodiesel and diesel without premature degradation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose handle different fuels and ethanol blends?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses an FKM (fluorine rubber) inner compound that resists swelling and softening when exposed to modern oxygenated fuels. ECO cover material and aramid fiber reinforcement add durability against external wear and pressure cycling. Together, these materials let the hose work with gasoline, E10–E85, biodiesel and diesel safely within rated limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFKM inner tube for strong chemical resistance to ethanol and biodiesel\u003c\/li\u003e\n  \u003cli\u003eCompatible with E10, E15, E85, diesel and conventional gasoline\u003c\/li\u003e\n  \u003cli\u003eAramid fiber reinforcement for higher burst and fatigue strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pressure and temperature ranges can I expect?\u003c\/h3\u003e\n\u003cp\u003eThis 5\/16\" hose is rated for 300 PSI working pressure with a 1200 PSI burst pressure, providing a large safety margin for fuel injection systems. Temperature capability ranges from -40°F up to 275°F in continuous service, with short-term tolerance to about 302°F. Those parameters make it suitable for under-hood installations and proximity to hot engine components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 300 PSI; burst: 1200 PSI\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40°F to 275°F (short-term 302°F)\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius: 2.52 inches (64 mm) for routing in tight spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hose fit my system and how is it sized?\u003c\/h3\u003e\n\u003cp\u003eThe hose has a 5\/16 inch (approx. 8 mm) inner diameter with a 0.55 inch (14 mm) outside diameter and manufacturing tolerances accounted for. It comes as a 25-foot length to allow multiple runs or custom cut-to-length installations. The SAE J30R9 construction means it is backward-compatible with many 30R7 and 30R6 applications often found on modern vehicles and swaps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eID: 5\/16\" (8 mm) with ±0.4 mm tolerance\u003c\/li\u003e\n  \u003cli\u003eOD: 0.55\" (14 mm) with ±0.5 mm tolerance; length: 25 ft\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet SAE J30R9 and compatible with 30R7\/30R6 systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: EVIL ENERGY’s 5\/16\" SAE 30R9 hose is aimed at mechanics, performance builders and DIY enthusiasts needing a durable, ethanol-compatible fuel line for fuel injection systems, LS engine swaps, fuel pumps, filters and vapor or return lines. It suits both everyday street cars and higher-demand setups where chemical resistance, temperature tolerance and pressure reliability matter. If you need a long run of premium-rated hose to cut and install to exact lengths or to carry multiple feeds, this 25-foot roll offers flexibility and industry-standard performance without compromising on material quality.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with E85 and biodiesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The FKM inner and ECO cover are formulated to resist ethanol blends (including E85) and biodiesel within the listed temperature and pressure limits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut this 25ft hose to length and use clamps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hose is supplied on a 25-foot roll for custom cutting and works with standard fuel hose clamps and fittings rated for SAE J30R9 service.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584851771577,"sku":"B0BJJ58D47","price":175.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-fuel-hose.jpg?v=1790456474"},{"product_id":"evil-energy-3-8-fuel-injection-hose-25ft-sae-j30r9-300-psi-fkm-inner-aramid-reinforced","title":"EVIL ENERGY 3\/8 Fuel Injection Hose 25FT SAE J30R9 — 300 PSI, FKM Inner \u0026 Aramid Reinforced","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 3\/8\" fuel injection hose is a 25-foot SAE J30R9-rated line built with an FKM inner, ECO cover and aramid reinforcement for 300psi working pressure and broad fuel compatibility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premium fuel line is engineered for modern fuel-injection systems and demanding under-hood environments. It combines fluorine-rubber inner tubing with an epichlorohydrin cover and aramid fiber reinforcement to deliver chemical resistance, heat tolerance, and a high burst rating. The hose meets SAE J30R9 requirements and supports common fuels including gasoline, ethanol blends, biodiesel, and diesel — making it suitable for performance builds, replacements, and conversions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose perform under pressure and heat?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY 3\/8\" hose is rated for 300 psi continuous working pressure with a 1200 psi burst pressure, providing a wide safety margin for fuel-injection and pump-driven systems. Its materials allow operation across a broad temperature window and intermittent exposure to higher temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 300 psi for reliable continuous operation.\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 1200 psi for emergency safety margin.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40°F to 275°F regular use, intermittent to 302°F.\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius: 2.99 inches (76 mm) for compact routing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fuels and applications is it compatible with?\u003c\/h3\u003e\n\u003cp\u003eConstructed with an FKM inner tube, this hose resists degradation from a wide variety of fuels and additives. It is designed for fuel injection lines but also works well for fuel filters, tanks, pumps, LS swaps, and related plumbing where SAE 30R9 performance is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with gasoline, ethanol blends (E10, E15, E85), biodiesel, and diesel.\u003c\/li\u003e\n  \u003cli\u003eSuitable for fuel injection systems, fuel pumps, filters, and tank lines.\u003c\/li\u003e\n  \u003cli\u003eAccepts use in vapor emission and oil-cooling pathways where SAE R9 specs apply.\u003c\/li\u003e\n  \u003cli\u003eWorks with other SAE 30R6 and 30R7 applications when higher chemical resistance is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the hose dimensions and installation considerations?\u003c\/h3\u003e\n\u003cp\u003eThe line ships as a continuous 25-foot length with a nominal inside diameter of 3\/8\" (9.5 mm) and an outside diameter near 0.63\" (16 mm). Tolerances are included to assist fitment; measure fittings and clamps carefully for secure, leak-free connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInside diameter: 3\/8\" (9.5 mm), tolerance ±0.4 mm.\u003c\/li\u003e\n  \u003cli\u003eOutside diameter: 0.63\" (16 mm), tolerance ±0.5 mm.\u003c\/li\u003e\n  \u003cli\u003eLength: 25 feet of continuous hose for multiple runs or cutting to size.\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius: 2.99\" (76 mm) to avoid kinks or flow restriction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose SAE J30R9 construction for a fuel-injection project?\u003c\/h3\u003e\n\u003cp\u003eSAE J30R9 is a widely accepted specification for fuel-injection lines that demand higher heat and chemical resistance than generic hoses. Choosing an R9-rated hose reduces the risk of premature swelling, hardening, or failure when exposed to modern fuel blends and elevated engine-compartment temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets and exceeds SAE J30R9 standards for fuel-injection service.\u003c\/li\u003e\n  \u003cli\u003eFKM inner tube improves resistance to alcohols and aggressive fuels.\u003c\/li\u003e\n  \u003cli\u003eAramid fiber reinforcement delivers improved burst and abrasion resilience.\u003c\/li\u003e\n  \u003cli\u003eECO cover offers durable external protection against heat and ozone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Installers, tuners, and DIY mechanics who need a durable, fuel-compatible hose for performance engines, LS swaps, or replacements in modern fuel systems will appreciate this EVIL ENERGY 3\/8\" SAE 30R9 line. It’s aimed at anyone who requires a long continuous length (25 ft) with proven material performance and clear dimensional specs for dependable routing and secure connections.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for E85 and ethanol blends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The FKM inner tube is compatible with E85, E10, E15 and other ethanol blends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this hose for high-temperature engine compartments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Rated for -40°F to 275°F regular use and intermittent exposure up to 302°F.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584851837113,"sku":"B0BJJB3W6J","price":179.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-3-8-fuel-hose.jpg?v=1790456473"},{"product_id":"evil-energy-fuel-pressure-regulator-6an-efi-adjustable-30-70-psi-red-anodized-with-gauge-fittings","title":"EVIL ENERGY Fuel Pressure Regulator 6AN EFI Adjustable 30–70 PSI, Red Anodized with Gauge \u0026 Fittings","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's red adjustable 6AN EFI bypass fuel pressure regulator controls fuel pressure between 30 and 70 PSI for gasoline and ethanol blends, and ships with gauge, fittings, bracket and braided lines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact aluminum regulator is designed for return-style EFI systems where stable, adjustable fuel pressure matters for tunability and consistent injector performance. With a top-mounted set screw for simple adjustment, an included pressure gauge, and multiple AN and M fittings, it fits a wide range of performance and retrofit applications. It is finished in red anodize for corrosion resistance and visual appeal.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I adjust fuel pressure and what range can I expect?\u003c\/h3\u003e\n\u003cp\u003eAdjustment is performed by turning the set screw on the regulator's top cap to increase or decrease spring tension. The unit covers an operating range from 30 PSI up to 70 PSI so you can dial in pressure for different injectors or boost\/tuning needs. Always confirm pressure with the supplied gauge during tuning and after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable range: 30–70 PSI\u003c\/li\u003e\n  \u003cli\u003eTop-mounted set screw for quick tuning\u003c\/li\u003e\n  \u003cli\u003eIncludes a pressure gauge for immediate verification\u003c\/li\u003e\n  \u003cli\u003eUse a calibrated fuel pressure gauge for final tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fuels and lines are compatible with this regulator?\u003c\/h3\u003e\n\u003cp\u003eThe regulator body and seals are compatible with gasoline, E85 and other alcohol\/ethanol blends, making it suitable for many high-performance fuel setups. It is not compatible with diesel fuel. Note that nylon braided fuel line included is not compatible with E85—use the supplied stainless braided CPE lines or appropriate E85-rated hose when running ethanol blends.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts gasoline and ethanol blends including E85\u003c\/li\u003e\n  \u003cli\u003eNot compatible with diesel fuel\u003c\/li\u003e\n  \u003cli\u003eAvoid nylon braided line with E85—use stainless braided CPE lines\u003c\/li\u003e\n  \u003cli\u003eCheck hose material compatibility for your application\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings, ports and installation notes should I be aware of?\u003c\/h3\u003e\n\u003cp\u003eThe package contains a variety of AN and M fittings to accommodate different fuel rails and return plumbing, plus AN port plugs for unused openings. Do not install the 6AN-to-M12x1.25 or 6AN-to-M14x1.5 fittings on the regulator body itself—those are intended for fuel rail connections only and may leak if used incorrectly. When installing the NPT pressure gauge port, use thread sealant tape to ensure a leak-free seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: pressure gauge, bracket, multiple AN fittings and plugs\u003c\/li\u003e\n  \u003cli\u003e6AN-to-M12x1.25 and 6AN-to-M14x1.5 fittings are for fuel rail use only\u003c\/li\u003e\n  \u003cli\u003eUse thread sealant tape on NPT gauge port to prevent leaks\u003c\/li\u003e\n  \u003cli\u003eFollow proper torque specs and routing for fuel safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how does that help installation?\u003c\/h3\u003e\n\u003cp\u003eThe regulator ships with a full accessory kit to simplify mounting and plumbing right away. A bracket and multiple stainless braided CPE fuel lines are included so you can mock up the regulator location and connect supply and return lines without sourcing additional parts. The variety of AN fittings and port plugs gives flexibility for many common EFI setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x EVIL ENERGY fuel pressure regulator (red anodized)\u003c\/li\u003e\n  \u003cli\u003e1 x pressure gauge and 1 x mounting bracket\u003c\/li\u003e\n  \u003cli\u003eAN fittings: two 6AN port plugs, four 6AN-to-6AN ORB fittings, one 6AN ORB-to-6AN barb, two 6AN-to-M fittings\u003c\/li\u003e\n  \u003cli\u003e3 x 6AN stainless steel braided CPE fuel lines included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? This EVIL ENERGY adjustable fuel pressure regulator is aimed at tuners, DIY enthusiasts and performance mechanics who run return-style EFI systems and need a reliable, tunable regulator for gasoline or ethanol blends. It's useful for upgraded injectors, turbo or supercharged applications, and custom fuel systems where precise pressure control and a complete fitting kit speed up installation. If you operate a diesel system or rely solely on nylon lines with E85, choose components rated for those conditions instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this regulator be used with E85?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—regulator is compatible with E85, but avoid nylon braided lines with E85; use the supplied stainless braided CPE lines or E85-rated hose.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure range does the regulator support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Adjustable from 30 PSI to 70 PSI using the top set screw; always confirm with the included gauge.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584862159033,"sku":"B0894H6G2Q","price":188.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-regulator-front-view.jpg?v=1790456835"},{"product_id":"evil-energy-10an-oil-catch-can-750ml-baffled-reservoir-with-10ft-braided-hose-bottom-drain","title":"EVIL ENERGY 10AN Oil Catch Can 750ml Baffled Reservoir with 10ft Braided Hose, Bottom Drain","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 10AN Oil Catch Can is a 750ml baffled breather reservoir with a convenient bottom drain valve and a 10-foot braided hose, built to trap oil and contaminants from crankcase\/VVT ventilation systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis aluminum alloy catch can kit is designed to protect intake components and maintain engine cleanliness by separating oil vapor and sludge from PCV\/CCV gases. Supplied with a baffled internal design, secure 10AN (7\/8-14 UNF) fittings and a reinforced fuel-grade hose, the kit is engineered for universal vehicle fitment where space allows. The can’s durable construction, threaded drain and included o-ring make servicing simple while matching the demands of high-temperature, high-pressure under-hood environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this catch can reduce oil buildup in the intake?\u003c\/h3\u003e\n\u003cp\u003eThe baffled interior forces crankcase gases to change direction, causing heavier oil droplets and particulates to condense and collect in the 750ml reservoir. Cleaner ventilation gases are routed back to the intake or atmosphere depending on your setup, lowering carbon and varnish accumulation on valves and sensors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBaffled separation for improved oil condensation and retention\u003c\/li\u003e\n  \u003cli\u003e750ml capacity to minimize frequent emptying\u003c\/li\u003e\n  \u003cli\u003eThreaded fittings and o-ring seal reduce leakage risk\u003c\/li\u003e\n  \u003cli\u003eBottom drain valve simplifies draining without removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and materials I should know?\u003c\/h3\u003e\n\u003cp\u003eThe can is machined from lightweight aluminum alloy for corrosion resistance and thermal stability. It uses 10AN inlet\/outlet threads (7\/8-14 UNF) with a 3\/8 NPT drain, and the supplied hose is a braided CPE\/stainless\/nylon construction rated for demanding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCatch can capacity: 750ml\u003c\/li\u003e\n  \u003cli\u003eThread sizes: 10AN (7\/8-14 UNF) fittings; bottom drain 3\/8 NPT\u003c\/li\u003e\n  \u003cli\u003eHose dimensions: ID 0.56\" (14.22mm), OD 0.78\" (19.8mm), length 10 ft\u003c\/li\u003e\n  \u003cli\u003eOperating range: -40°F to 257°F; working pressure 500 PSI; burst 2000 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the EVIL ENERGY catch can?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires a secure mounting point with enough clearance; the kit is broadly compatible but verify fitment in your engine bay first. When assembling, apply a light lubricant to threads and tighten with a wrench; the o-ring gasket and drain valve make periodic service quick and clean.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck available space before mounting; universal application recommended\u003c\/li\u003e\n  \u003cli\u003eUse lubricating oil on threads and tighten securely with a wrench\u003c\/li\u003e\n  \u003cli\u003eEmpty via the bottom drain valve; replace o-ring if worn to prevent leaks\u003c\/li\u003e\n  \u003cli\u003eObserve hose routing away from extreme heat sources and sharp edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? EVIL ENERGY’s 10AN 750ml baffled catch can kit is aimed at car enthusiasts, tuners, and maintenance-minded drivers who want to reduce intake contamination and prolong component life. It suits vehicles with compatible PCV\/CCV plumbing and enough engine-bay space, and works well for turbocharged or high-mileage engines where oil blow-by and valve deposits are concerns. If you value a durable aluminum build, easy draining and a long braided hose for flexible routing, this kit offers a practical, serviceable solution to control crankcase oil vapor and keep intake systems cleaner between services.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this catch can fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit is broadly universal, but measure available space and PCV hose sizes; it uses 10AN (7\/8-14 UNF) fittings and a 10ft hose for flexible routing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I empty the catch can?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Open the bottom 3\/8 NPT drain valve to release collected oil; use the o-ring seal and re-tighten after servicing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584897188025,"sku":"B0CH15Q16F","price":200.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-catch-can.jpg?v=1790458150"},{"product_id":"evil-energy-an10-ptfe-fuel-line-kit-10ft-black-e85-compatible-hose-high-temp-1-250-psi-working-pressure","title":"EVIL ENERGY AN10 PTFE Fuel Line Kit — 10ft Black E85-Compatible Hose, High Temp \u0026 1,250 PSI Working Pressure","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's AN10 PTFE fuel line kit is a 10-foot, black, AN10-sized E85-compatible hose designed for high-temperature, high-pressure fuel delivery.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis PTFE-lined, nylon-braided hose pairs chemical resistance with mechanical strength to serve performance and race applications where temperature and pressure are demanding. The hose measures approximately 0.52\" internal diameter (ID) and 0.69\" outer diameter (OD), comes in a 10-foot length, and is built to tolerate aggressive fuels such as E85 when installed correctly with appropriate AN fittings.\u003c\/p\u003e\n\n\u003ch3\u003eHow hot or pressurized can this AN10 PTFE hose handle?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY PTFE hose is manufactured to withstand a wide working range. It performs safely from very cold conditions up to elevated temperatures, while maintaining high pressure capability suitable for many fuel systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking temperature: -76°F to 446°F (-60°C to 230°C).\u003c\/li\u003e\n  \u003cli\u003eRated working pressure: 1,250 PSI under normal conditions.\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: approximately 3,750 PSI for safety margin during spikes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this hose compatible with E85 and performance fuels?\u003c\/h3\u003e\n\u003cp\u003eThe PTFE core resists chemical attack from ethanol-blended fuels like E85 better than many rubber hoses. When paired with proper AN fittings and clamps, it becomes a reliable option in modified fuel systems that use corrosive or oxygenated fuels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePTFE inner liner resists ethanol and common additives.\u003c\/li\u003e\n  \u003cli\u003eNylon braid adds abrasion and crush resistance for engine-bay routing.\u003c\/li\u003e\n  \u003cli\u003eIntended for use with AN10 (10AN) fittings and adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical dimensions and installation considerations?\u003c\/h3\u003e\n\u003cp\u003eThe tube has a 0.52-inch ID and 0.69-inch OD across a 10-foot length, offering generous flow for many inline or return-style fuel systems. Note the hose is relatively stiff due to the PTFE lining and braid; it cannot be folded in half without risk of damage, so plan routing and bends accordingly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize: ID 1\/2\" (0.52 in), OD 0.69 in, length 10 ft.\u003c\/li\u003e\n  \u003cli\u003eDo not sharply kink, fold, or crease the hose; maintain gentle bends.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended for sealed AN fitting connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this for other high-temperature or high-pressure applications?\u003c\/h3\u003e\n\u003cp\u003eYes — beyond fuel delivery, the PTFE-lined, nylon-braided construction suits other demanding fluid-transfer roles where chemical resistance and temperature tolerance are required. Always verify compatibility with the fluid and system pressure before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for certain oil, coolant, or solvent lines when compatible with PTFE.\u003c\/li\u003e\n  \u003cli\u003eNot intended for applications requiring extreme flexibility or repeated folding.\u003c\/li\u003e\n  \u003cli\u003eConfirm all system fittings, clamps, and seals are rated for your specific use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? EVIL ENERGY's AN10 PTFE fuel line kit is aimed at vehicle owners, racers, tuners, and fabricators who need a chemically resistant, high-pressure-capable AN10 hose for E85 or other performance fuels. If you require a durable line for elevated temperatures and want a trade-ready 10-foot length for custom installations, this hose fits those needs — just plan routes carefully and use correct AN hardware or have a professional installer complete the hookups.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this hose with E85 fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PTFE inner liner resists ethanol blends like E85, but ensure AN fittings and seals are compatible and professionally installed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the hose flexible enough for tight bends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The PTFE-lined, nylon-braided hose is relatively stiff and should not be folded; use gentle radius bends and avoid kinking.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584931201209,"sku":"B091GV6L8L","price":183.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-an10-front-packaging.jpg?v=1790459541"},{"product_id":"evil-energy-1-fuel-transfer-hose-1in-x-20ft-diesel-gasoline-stainless-braid-150-psi","title":"EVIL ENERGY 1\" Fuel Transfer Hose 1in x 20ft — Diesel\/Gasoline, Stainless-Braid, 150 PSI","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 1\" Fuel Transfer Hose (20 ft) is a heavy-duty fuel transfer line built for diesel, gasoline and biodiesel handling on farms, service pumps, and mobile fuel systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 1-inch diameter, 20-foot hose combines a nitrile rubber core, stainless-steel reinforcement and a weather-resistant outer compound to deliver reliable fuel transfer under demanding conditions. Designed for industrial and agricultural use, it balances flexibility with crush and abrasion resistance while meeting temperature and pressure ranges common to portable fueling tasks. The hose works with a wide variety of petroleum-based and blended fuels, giving you a single line for multiple applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow tough is this hose for everyday farm and pump use?\u003c\/h3\u003e\n\u003cp\u003eThe construction prioritizes longevity: a nitrile inner tube resists fuel swelling, a stainless-steel braid adds burst protection, and a blended PVC\/nitrile outer shields against oils, ozone and abrasion. It maintains performance across a broad temperature span so it stays usable in cold mornings and hot afternoons.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 1 inch (25 mm) for strong flow rates\u003c\/li\u003e\n  \u003cli\u003eLength: 20 feet (6 m) to reach tanks and equipment\u003c\/li\u003e\n  \u003cli\u003eWorking pressure: 150 PSI, bursting at 435 PSI for safety margin\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40 °F to 212 °F for year-round use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fuels and fluids can I safely run through this line?\u003c\/h3\u003e\n\u003cp\u003eThis hose is compatible with a wide array of hydrocarbon and bio-blend fuels commonly used on farms and at pumps. It resists degradation from ethanol blends and biodiesel while remaining suitable for oils and petroleum solvents used in maintenance and refueling tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDiesel, gasoline and kerosene\u003c\/li\u003e\n  \u003cli\u003eBiodiesel blends (B-20, up to 100% where specified) and ethanol blends (E10, E15, E85\/E100)\u003c\/li\u003e\n  \u003cli\u003ePropane transfer applications when fitted correctly and to code\u003c\/li\u003e\n  \u003cli\u003eMineral spirits, petroleum oils and grease-compatible service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow flexible and easy is it to handle on the job?\u003c\/h3\u003e\n\u003cp\u003eWith a minimum bending radius around 300 mm, the hose stays manageable without kinking during typical routing around tanks and pumps. The 20-foot length hits a balance between reach and storage convenience, and the outer compound gives a grippy surface for handheld control even when wet or oily.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMinimum bending radius: 300 mm to prevent kinks\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: approx. 35.5 mm for rugged handling\u003c\/li\u003e\n  \u003cli\u003eStainless braid for crush resistance while remaining flexible\u003c\/li\u003e\n  \u003cli\u003eLightweight enough for portable pump setups and reel use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and pressure considerations should I know?\u003c\/h3\u003e\n\u003cp\u003eThe hose is rated for a 150 PSI working pressure with a substantial burst margin to reduce risk during transient pressure events. Always pair the hose with fittings and clamps rated for fuel service and inspect for wear before each use. Replace the hose per your local regulations or when signs of cracking, hardening or leaks appear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 150 PSI; bursting: 435 PSI\u003c\/li\u003e\n  \u003cli\u003eUse fuel-rated clamps and threaded fittings only\u003c\/li\u003e\n  \u003cli\u003eInspect regularly for cuts, abrasion, or chemical swelling\u003c\/li\u003e\n  \u003cli\u003eFollow local codes for fuel transfer and storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? EVIL ENERGY's 1\" x 20 ft fuel transfer hose is aimed at farmers, equipment owners, mobile fuelers and service technicians who need a single, dependable hose for a range of fuels. If you operate farm tanks, portable pumps, refueling carts or small-scale dispensing stations and want a durable line that tolerates blended fuels and seasonal temperatures, this hose offers a practical, long-life solution. For installations requiring fittings, reels or vapor recovery components, pair the hose with compatible hardware rated for your specific fuel type and local safety standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose handle biodiesel and ethanol blends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is compatible with many biodiesel blends (including B-20 and higher where specified) and ethanol blends like E10 and E15.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure and temperature ranges are supported?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Working pressure is 150 PSI (burst 435 PSI). Temperature range is -40 °F to 212 °F for year-round use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584937558201,"sku":"B0BYYZNFT2","price":225.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-20ft-hose.jpg?v=1790459855"},{"product_id":"evil-energy-6an-ptfe-fuel-line-kit-20ft-black-nylon-braided-e85-compatible-1500-psi","title":"EVIL ENERGY 6AN PTFE Fuel Line Kit 20ft Black — Nylon-Braided, E85-Compatible, 1500 PSI","description":"\u003cstrong\u003eEVIL ENERGY 6AN PTFE Fuel Line Kit is a 20-foot, AN6 (6AN) PTFE inner hose with a nylon braid exterior designed for high-temperature, high-pressure automotive fuel systems including E85-compatible applications.\u003c\/strong\u003e\n\nThis kit supplies a continuous 20 ft (6 m) length of PTFE-lined fuel hose with AN6 dimensions suitable for many performance and replacement plumbing jobs. The hose combines a chemically resistant PTFE inner core with a durable nylon braided jacket to resist abrasion and keep fuel flows stable under challenging conditions. It’s engineered for automotive fuels, lubricants and coolants and rated for a broad temperature range, making it a versatile option for engine bays, racecars and custom fuel routing.\n\n\u003ch3\u003eWhat size and pressure ratings does this 6AN PTFE hose have?\u003c\/h3\u003e\n\u003cp\u003eThe hose has an internal diameter (ID) of 5\/16\" (0.31 in) and an outer diameter (OD) of 0.45\". It is specified for typical AN6 fittings and measured to provide reliable flow for common 6AN fuel fittings. Pressure and temperature specs help you match the line to your system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eID: 5\/16\" (0.31 in), OD: 0.45 in — fits standard AN6 hardware\u003c\/li\u003e\n  \u003cli\u003eWorking temperature: -76°F to 446°F (-60°C to 230°C)\u003c\/li\u003e\n  \u003cli\u003eMaximum working pressure: 1,500 PSI; bursting pressure: 4,500 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this PTFE hose safe to use with E85 and other fuels?\u003c\/h3\u003e\n\u003cp\u003eThe PTFE inner liner offers strong chemical resistance, making it compatible with ethanol blends such as E85 as well as gasoline, diesel, and many lubricants. The external nylon braid protects the core from scuffs and mechanical wear common in engine bay installations. Always inspect fittings and clamps for compatibility with ethanol fuels because some materials can degrade over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePTFE core resists ethanol, gasoline, diesel and most lubricants\u003c\/li\u003e\n  \u003cli\u003eNylon braid reduces abrasion and helps maintain routing integrity\u003c\/li\u003e\n  \u003cli\u003eRecommended for fuel system, return lines, and high-temp applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and handle the PTFE nylon braided hose?\u003c\/h3\u003e\n\u003cp\u003eThe hose is relatively stiff compared with rubber lines and is not intended to be sharply folded. For safe, long-lasting installation, plan smooth routing paths and avoid tight bends; use proper AN6 fittings and clamps. Installation by an experienced technician is recommended to ensure leak-free connections and correct heat shielding where needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not fold or sharply bend; maintain gradual curves\u003c\/li\u003e\n  \u003cli\u003eUse proper AN6 fittings and torque specifications for fittings\u003c\/li\u003e\n  \u003cli\u003eConsider heat shielding or routing away from extreme heat sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical uses and environments suit this fuel line kit?\u003c\/h3\u003e\n\u003cp\u003eThis PTFE nylon braided hose is built for demanding automotive environments where temperature, pressure and chemical exposure are concerns. It is well suited to performance vehicles, race teams, and anyone upgrading stock fuel lines for improved durability or E85 conversion. The continuous 20-foot length allows cutting to size for multiple connections or custom runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePerformance fuel delivery, return lines, and tank-to-engine plumbing\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature or high-pressure applications in engine bays\u003c\/li\u003e\n  \u003cli\u003eCustom installations where E85 compatibility is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThis EVIL ENERGY 6AN PTFE Fuel Line Kit is for mechanically minded vehicle owners, fabricators, tuners and race teams who need a chemically resistant, high-temperature hose in a standard AN6 size. Choose this kit when you require a long, continuous length to cut to size, when routing through tight engine compartments with abrasion risk, or when converting to ethanol fuels. If you’re unsure about bending or fitting technique, professional installation will ensure safe, leak-free operation and longer service life.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose be used with E85 fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PTFE inner liner is compatible with ethanol blends like E85, gasoline and many lubricants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I bend the hose sharply to fit tight spaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The PTFE nylon braided hose is relatively stiff—avoid sharp bends and use gradual curves or fittings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584958202041,"sku":"B0922M63H8","price":211.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-an6-20ft.jpg?v=1790461016"},{"product_id":"evil-energy-an10-ptfe-fuel-line-hose-20-ft-black-e85-compatible-nylon-braided-1-2-id-high-temp","title":"EVIL ENERGY AN10 PTFE Fuel Line Hose 20 ft Black — E85-Compatible Nylon-Braided, 1\/2\" ID High-Temp","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's AN10 PTFE fuel line kit is a 20-foot, E85-compatible, nylon-braided PTFE hose assembly built for high-temperature, high-pressure automotive fuel systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis AN10 (0.52\" ID) PTFE fuel hose from EVIL ENERGY combines a smooth PTFE inner core with a protective nylon braid and black outer finish to deliver chemical resistance, wide temperature tolerance, and pressure capacity for performance vehicles. The kit supplies 20 feet (approximately 6 meters) of hose rated for fuels, lubricants, and coolants and is engineered to meet demanding conditions where durability and fuel compatibility matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this PTFE hose handle modern fuels like E85?\u003c\/h3\u003e\n\n\u003cp\u003eThe PTFE inner liner resists chemical attack from ethanol blends, solvents, and additives, keeping fuel clean and preventing swelling or degradation common with some rubber hoses. Its construction reduces permeation and maintains consistent flow characteristics when used with gasoline, E85, diesel, and many lubricants.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatibility: E85, gasoline, diesel, and most automotive lubricants.\u003c\/li\u003e\n  \u003cli\u003eMaterial advantage: inert PTFE inner core resists chemical breakdown.\u003c\/li\u003e\n  \u003cli\u003ePerformance: minimizes fuel vapor permeation and maintains integrity over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperature and pressure conditions can this hose withstand?\u003c\/h3\u003e\n\n\u003cp\u003eThis hose is rated to operate across a broad thermal window from -76°F to 446°F (-60°C to 230°C), making it suitable for under-hood heat and colder climates. It supports a maximum continuous working pressure of 1,250 PSI and a burst pressure up to 3,750 PSI, offering safety margins for fuel delivery systems and many high-pressure applications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorking temperature range: -76°F to 446°F (-60°C to 230°C).\u003c\/li\u003e\n  \u003cli\u003eWorking pressure: up to 1,250 PSI for steady operation.\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: up to 3,750 PSI for transient events.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the hose dimensions and installation considerations?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose measures 20 feet in length with an inner diameter of 1\/2\" (0.52\") and an outer diameter of 0.69\", corresponding to AN10 sizing commonly used in aftermarket fuel systems. Note that PTFE hoses are relatively stiff compared to rubber lines and should not be folded sharply; routing and fitting selection are important for a reliable, leak-free installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSize: AN10 \/ 1\/2\" ID (0.52\"), 0.69\" OD, 20 ft (6 m) length.\u003c\/li\u003e\n  \u003cli\u003eHandle with care: do not fold or crease the hose—use smooth bends.\u003c\/li\u003e\n  \u003cli\u003eRecommendation: professional installation or experienced DIY routing to avoid stress points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this hose improve my vehicle's fuel system performance?\u003c\/h3\u003e\n\n\u003cp\u003eUsing a PTFE-lined hose reduces fuel contamination, resists swelling from ethanol fuels, and holds its shape under pressure—helping maintain consistent fuel delivery and system reliability. The nylon braid adds abrasion resistance and an extra layer of mechanical protection for tougher environments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCleaner flow: smooth PTFE bore minimizes deposits and drag.\u003c\/li\u003e\n  \u003cli\u003eDurability: nylon braid protects against chafing and external damage.\u003c\/li\u003e\n  \u003cli\u003eConsistency: resists dimensional changes from heat or ethanol exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: EVIL ENERGY's AN10 PTFE fuel line kit is intended for performance vehicle owners, tuners, and professional mechanics who require ethanol-compatible, high-pressure fuel lines for aftermarket pumps, rails, fuel filters, and EFI systems. It’s ideal when chemical resistance, temperature tolerance, and pressure capacity are priorities; however, because PTFE hose is relatively stiff, installers should have experience or seek professional fitting to ensure safe routing and leak-free connections.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this AN10 hose compatible with E85 fuels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PTFE liner resists ethanol and is compatible with E85, gasoline, diesel, and most automotive lubricants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I bend or fold this PTFE hose for tight routes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. PTFE hose is relatively stiff and should not be folded; use smooth bends and proper fittings or professional installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584958333113,"sku":"B0922LBLQ1","price":273.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-an10-ptfe-fuel-line-front-packaging.jpg?v=1790461017"},{"product_id":"evil-energy-6an-ptfe-fuel-line-kit-20-ft-e85-compatible-high-temp-1500-psi","title":"EVIL ENERGY 6AN PTFE Fuel Line Kit 20 ft — E85-Compatible, High-Temp 1500 PSI","description":"\u003cstrong\u003eEVIL ENERGY 6AN PTFE Fuel Line Kit is a 20-foot, E85-compatible 6AN (5\/16\" ID) braided PTFE fuel line system engineered for high-temperature, high-pressure EFI and LS swap applications.\u003c\/strong\u003e\n\nThis kit delivers a corrosion-resistant PTFE core with a nylon braided outer jacket and 6AN fittings designed for modern fuel systems that run gasoline, ethanol blends (including E85), lubricants and coolants. With a working temperature range from -76°F to 446°F (-60°C to 230°C) and a rated working pressure up to 1,500 PSI (burst 4,500 PSI), it aims to provide durable routing for installations where fuel compatibility and heat resistance matter.\n\n\u003ch3\u003eWill this hose work for my LS swap or EFI conversion?\u003c\/h3\u003e\n\u003cp\u003eYes — the 6AN PTFE hose is commonly used in LS swaps and aftermarket EFI systems because of its chemical compatibility and pressure ratings. Its 5\/16\" (0.31\") inner diameter matches typical 6AN plumbing, and the 20 ft length gives flexibility for routing in larger engine bays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 5\/16\" (0.31 inch) suitable for 6AN fittings\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 0.45 inch for standard AN clamp and fitting sizes\u003c\/li\u003e\n  \u003cli\u003eLength: 20 ft (6 m) to cover long runs or multiple lines\u003c\/li\u003e\n  \u003cli\u003eCompatible with E85 and most automotive fluids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the PTFE hose under heat and pressure?\u003c\/h3\u003e\n\u003cp\u003eThe PTFE core and nylon braid resist heat and chemical attack far better than many rubber hoses. The hose is rated to operate from -76°F to 446°F (-60°C to 230°C), with a maximum working pressure of 1,500 PSI and a burst pressure around 4,500 PSI, making it suitable for high-demand fuel systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating temperature window: -76°F to 446°F (-60°C to 230°C)\u003c\/li\u003e\n  \u003cli\u003eWorking pressure: up to 1,500 PSI for EFI applications\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: approximately 4,500 PSI for safety margin\u003c\/li\u003e\n  \u003cli\u003eNylon braid protects the PTFE from abrasion and kinking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any installation considerations or limitations?\u003c\/h3\u003e\n\u003cp\u003eThis PTFE hose is stiffer than conventional rubber lines and should not be folded or sharply bent; planning routing and using proper AN fittings and clamps is essential. Professional installation is recommended for complex builds to ensure leak-free connections and correct routing away from extreme heat or moving parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not fold or crease the hose; avoid tight radius bends\u003c\/li\u003e\n  \u003cli\u003eMeasure and cut precisely; use compatible 6AN fittings\u003c\/li\u003e\n  \u003cli\u003eSecure with clamps and route clear of exhaust and sharp edges\u003c\/li\u003e\n  \u003cli\u003eConsider professional installation for EFI\/LS swap complexity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fluids can I run through this PTFE fuel line?\u003c\/h3\u003e\n\u003cp\u003eEVIL ENERGY PTFE fuel lines are formulated to be compatible with common automotive fuels, including gasoline and ethanol blends (E85), and can also carry many lubricants and coolants used in vehicle systems. Always verify compatibility if you plan to run specialty chemicals outside typical automotive applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eE85 and regular gasoline compatibility stated by manufacturer\u003c\/li\u003e\n  \u003cli\u003eSuitable for many engine lubricants and coolant routing where specified\u003c\/li\u003e\n  \u003cli\u003eNot intended for solvents or chemicals outside automotive use without verification\u003c\/li\u003e\n  \u003cli\u003eRefer to your vehicle and fluid manufacturer recommendations\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for? If you are swapping in an LS engine, installing an aftermarket EFI system, or upgrading old rubber lines for a fuel setup that demands higher temperature and pressure tolerance, this 20 ft EVIL ENERGY 6AN PTFE kit is tailored to those needs. It suits mechanics and experienced enthusiasts who need E85 compatibility and long hose runs; however, if you lack installation experience, plan to have a professional assemble and route the lines to ensure safe, leak-free operation.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for E85 fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The EVIL ENERGY PTFE line is rated for E85 and common automotive fuels, designed for chemical compatibility with ethanol blends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I bend the PTFE hose tightly around fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The PTFE hose is relatively stiff and must not be folded; use proper routing and AN fittings with correct bend radii.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584969736377,"sku":"B0CQT1S1X8","price":231.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-6an-ptfe-fuel-line-kit.jpg?v=1790461400"},{"product_id":"evil-energy-6an-ptfe-fuel-line-kit-26ft-e85-capable-efi-hose-with-nylon-braid-high-temp-1500-psi","title":"EVIL ENERGY 6AN PTFE Fuel Line Kit 26ft — E85-Capable EFI Hose with Nylon Braid, High Temp\/1500 PSI","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's 6AN PTFE Fuel Line Kit is a 26-foot, E85-capable, high-temperature and high-pressure fuel hose assembly designed for LS swaps and EFI applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for performance engines and modern fuel systems, this kit combines a PTFE core with a nylon braided jacket to deliver chemical resistance, wide temperature tolerance, and the pressure capacity needed for EFI and alternative fuels like E85. The hose features a 6AN (5\/16\" ID) sizing, a durable outer braid, and comes with fittings as pictured — ideal when replacing stock lines or building custom hardline runs where corrosion resistance and fuel compatibility matter.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hose work with my LS swap and E85 fuel setup?\u003c\/h3\u003e\n\u003cp\u003eYes—this kit is formulated to handle common gasoline blends including E85 and is sized for many LS swap fuel system needs. Check inlet\/outlet fitting sizes and available routing space before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 5\/16\" (0.31 in) — matches 6AN sizing\u003c\/li\u003e\n  \u003cli\u003eLength: 26 ft (7.9 m) — allows long runs or multiple lines\u003c\/li\u003e\n  \u003cli\u003eFuel compatibility: gasoline, E85, lubricants, and many coolants\u003c\/li\u003e\n  \u003cli\u003eIncludes fittings as shown in product images for direct installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this PTFE hose handle heat and pressure in EFI systems?\u003c\/h3\u003e\n\u003cp\u003eThe PTFE core provides excellent chemical stability while the nylon braid adds mechanical strength, enabling safe operation across a broad temperature range and under high system pressures. This makes the line suitable for engine bays with high underhood temperatures and modern fuel pump output.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating temperature: -76°F to 446°F (-60°C to 230°C)\u003c\/li\u003e\n  \u003cli\u003eMaximum working pressure: 1,500 PSI\u003c\/li\u003e\n  \u003cli\u003eBursting pressure: 4,500 PSI for added safety margin\u003c\/li\u003e\n  \u003cli\u003eRobust braid resists abrasion and external wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and route this PTFE fuel hose in my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe hose has a relatively stiff construction due to the PTFE core and braid, so it should be routed with care and avoided tight bends. Professional installation is recommended to ensure correct bend radii, leak-free fittings, and proper support along the run.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not fold or sharply bend the hose; maintain smooth curves\u003c\/li\u003e\n  \u003cli\u003eUse proper clamps and supports to prevent chafing and vibration\u003c\/li\u003e\n  \u003cli\u003eVerify fitting torque and sealing before pressurizing the system\u003c\/li\u003e\n  \u003cli\u003eMeasure available length and clearances prior to trimming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings, sizes, and accessories come with the kit?\u003c\/h3\u003e\n\u003cp\u003eThe package includes the 26-foot PTFE hose and the fittings shown in the product photos to help you build or repair a fuel line. Confirm the included fittings match your components and plan for any adapters you may need.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard 6AN-compatible fittings included (see images for specifics)\u003c\/li\u003e\n  \u003cli\u003eCut to length for custom assemblies or multiple line runs\u003c\/li\u003e\n  \u003cli\u003eAdapters may be required for non-AN connections or factory ports\u003c\/li\u003e\n  \u003cli\u003eProfessional crimping or clamp-style connections recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This EVIL ENERGY 6AN PTFE Fuel Line Kit suits tuners, engine builders, and DIY mechanics installing LS swap or EFI systems who need a long, durable, and E85-compatible fuel hose. It's most appropriate for users comfortable measuring and routing a stiffer PTFE hose or who plan to have the kit fitted by a professional. If you require flexible rubber lines for tight bends or quick DIY swaps, consider alternative hose types; for high-temp, high-pressure, and chemical-resistant runs, this kit is a solid choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for E85 fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PTFE core and nylon braid are compatible with E85 and other common automotive fuels and lubricants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I bend the hose sharply for tight spaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The hose is relatively stiff; avoid sharp bends and consider professional installation to maintain proper radii.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584970195129,"sku":"B0CQT1M831","price":265.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-6an-ptfe-hose.jpg?v=1790461420"},{"product_id":"evil-energy-8an-fuel-line-kit-20ft-stainless-steel-braided-cpe-hose-750-psi","title":"EVIL ENERGY 8AN Fuel Line Kit 20ft Stainless Steel Braided CPE Hose, 750 psi","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 8AN Fuel Line Kit is a 20-foot, stainless steel braided CPE hose assembly designed for high-pressure fuel and fluid routing in automotive and motorsport systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hose kit combines a CPE rubber core with 304 stainless steel wire braid and aluminum alloy fittings to deliver durable, flexible, and heat-resistant tubing for fuel supply, return lines, oil feeds, and cooling circuits. Built to withstand elevated pressures and temperatures, the 8AN (0.41\" ID) hose is engineered for performance applications where reliability and contamination resistance matter. Before installation, confirm the inner diameter and length suit your routing and connector requirements.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the physical dimensions and key ratings of this fuel line?\u003c\/h3\u003e\n\u003cp\u003eThe hose measures 0.41 inch inner diameter and 0.65 inch outer diameter, supplied as a continuous 20-foot length so you can cut to fit your project. It’s rated for demanding environments with a maximum working pressure of 750 psi and a burst pressure up to 2250 psi.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 0.41 inch (8AN standard)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 0.65 inch\u003c\/li\u003e\n  \u003cli\u003eLength: 20 feet — cut to required lengths\u003c\/li\u003e\n  \u003cli\u003eWorking pressure: 750 psi; burst pressure: 2250 psi\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -22°F to 248°F (-30°C to 120°C)\u003c\/li\u003e\n  \u003cli\u003eMinimum bending radius: 88.9 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and applications is the 8AN braided CPE hose suitable for?\u003c\/h3\u003e\n\u003cp\u003eThe combination of a chemically resistant CPE inner tube and stainless steel braid makes this hose compatible with a wide range of automotive fluids. It’s commonly used for fuel delivery and return, transmission oil cooler lines, turbo cooler feeds, vacuum or gauge connections, and lightweight oil lines in performance vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with gasoline, race fuels, diesel blends, transmission fluid, and engine oil\u003c\/li\u003e\n  \u003cli\u003eWorks as fuel supply and return lines or oil feed lines\u003c\/li\u003e\n  \u003cli\u003eSuitable for transmission cooler and turbo cooler plumbing\u003c\/li\u003e\n  \u003cli\u003eUse for vacuum lines and fuel gauge connections where rated size matches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the construction improve durability and installation flexibility?\u003c\/h3\u003e\n\u003cp\u003eThe hose’s CPE rubber core resists swelling and degradation from fuels and oils, while the 304 stainless steel wire braid adds puncture resistance and crush protection. Aluminum alloy fittings provide lightweight connection points that reduce added weight compared with heavier ferrous fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCPE inner tube for chemical resistance and longevity\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel braid offers abrasion and impact protection\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy fittings reduce weight and resist corrosion\u003c\/li\u003e\n  \u003cli\u003eLong 20-foot length lets you route and trim without extra couplers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying and during installation?\u003c\/h3\u003e\n\u003cp\u003eMeasure the required inner diameter and routing path to ensure the 0.41\" ID hose and 88.9 mm minimum bend radius fit your vehicle. Confirm fluid compatibility with CPE materials and use appropriate clamps or AN fittings rated for your system pressure to avoid leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify 0.41\" inner diameter meets your fittings and flow needs\u003c\/li\u003e\n  \u003cli\u003eConfirm minimum bending radius to prevent kinking in tight runs\u003c\/li\u003e\n  \u003cli\u003eInspect fittings and clamps for proper pressure rating and sealing\u003c\/li\u003e\n  \u003cli\u003eTrim with a clean cut and install with hose ends supported to avoid damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The EVIL ENERGY 8AN 20FT braided fuel line kit suits DIY mechanics, tuners, and motorsport builders needing a versatile, high-pressure hose for fuel, oil, or cooling circuits. It’s ideal for projects requiring a long, serviceable length of durable hose you can cut and fit yourself—especially where fuel compatibility, abrasion resistance, and temperature tolerance are priorities. If you need a pre-assembled hose with specific end fittings, pair this bulk length with AN-style fittings or professional assembly to match your system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with ethanol-blended fuels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—CPE inner tubing is compatible with many gasoline blends including ethanol mixes, but verify concentration and local fuel formulations first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this hose for high-temperature oil lines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the hose handles -22°F to 248°F (-30°C to 120°C); ensure operating temperature stays within this range.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584976519353,"sku":"B0DNF7M2SJ","price":182.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-8an-fuel-hose.jpg?v=1790461733"},{"product_id":"evil-energy-6an-fuel-line-kit-25ft-cpe-nylon-braided-hose-with-12-aluminum-fittings-750-psi","title":"EVIL ENERGY 6AN Fuel Line Kit — 25ft CPE Nylon-Braided Hose with 12 Aluminum Fittings, 750 psi","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 6AN Fuel Line Kit is a 25-foot CPE inner hose with 304 steel and nylon braid plus 12 aluminum alloy fittings, built for high-pressure fluid routing in fuel, oil, coolant and turbo applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-purpose 6AN line kit supplies a long length of braided hose and a selection of swivel ends so you can run fuel returns, supply lines, cooler connections or vacuum feeds without sourcing multiple parts. The construction combines a CPE rubber core, stainless-steel wire reinforcement and a nylon outer braid for abrasion resistance and flexible routing. Fittings are machined from aluminum alloy and include straight and angled swivel ends to simplify tight installations.\u003c\/p\u003e\n\n\u003ch3\u003eHow tough is this hose for high-pressure automotive systems?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY 6AN hose is rated for a maximum working pressure of 750 psi and a burst pressure up to 2,250 psi, making it suitable for many performance and maintenance tasks. Temperature tolerance covers typical engine-bay extremes, so it handles hot or cold climates reliably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 750 psi for sustained operation.\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 2,250 psi safety margin.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -22°F to 248°F for wide environmental use.\u003c\/li\u003e\n  \u003cli\u003eCompatible with fuels, oils, hydraulic fluids and coolant in many applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings and accessories are included for installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with 10 swivel hose ends in a mix of orientations and two hose separator clamps so you can terminate and organize lines immediately. The fittings include straight and angled adapters to reduce hose twisting and to fit confined engine-bay geometries.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 x 6AN swivel hose ends: 4 straight, 2 at 45°, 2 at 90°, 2 at 180°.\u003c\/li\u003e\n  \u003cli\u003e2 x 6AN hose separator clamps to secure parallel runs.\u003c\/li\u003e\n  \u003cli\u003e25 feet of 6AN braided hose (0.31\" ID, 0.56\" OD) for multiple runs or long routings.\u003c\/li\u003e\n  \u003cli\u003eAluminum-alloy fittings for corrosion resistance and lighter weight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and systems is this hose compatible with?\u003c\/h3\u003e\n\u003cp\u003eDesigned for versatility, the CPE inner tube and reinforced braid allow use with a wide range of automotive and performance fluids. While it’s suitable for many uses, follow your vehicle maker’s guidance for critical systems and avoid fluids not listed by the manufacturer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for fuel (including race gas), diesel, engine oil and transmission fluid.\u003c\/li\u003e\n  \u003cli\u003eWorks for coolant lines, turbo cooler lines, oil feed lines and returns.\u003c\/li\u003e\n  \u003cli\u003eAlso usable for vacuum and certain hydraulic or gauge lines where 6AN fits apply.\u003c\/li\u003e\n  \u003cli\u003eNot a substitute for manufacturer-specified OEM lines where special materials are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Mechanics, fabricators and performance enthusiasts who need a durable, long-length 6AN line with a variety of swivel fittings will find this EVIL ENERGY kit useful for custom fuel systems, oil and transmission cooler lines, turbo plumbing and general fluid routing. It’s suited for garages, race teams and DIY vehicle projects that require corrosion-resistant fittings, flexible routing and a high pressure rating. Always install with compatible end fittings, follow torque and routing best practices, and inspect lines regularly in demanding environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose handle race fuel and diesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CPE core and braided construction are compatible with race gas and diesel, but verify compatibility for specialized fuels before continuous use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fittings are included with the 25ft kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Kit includes 10 6AN swivel ends (4 straight, 2x45°, 2x90°, 2x180°) and two 6AN hose separator clamps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584976715961,"sku":"B0D83M822S","price":188.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-6an-kit-front-packaging.jpg?v=1790461758"},{"product_id":"evil-energy-8an-fuel-line-kit-20ft-cpe-nylon-braided-hose-12-piece-fittings-750-psi-fuel-resistant","title":"EVIL ENERGY 8AN Fuel Line Kit 20ft CPE Nylon Braided Hose — 12‑Piece Fittings, 750 PSI Fuel‑Resistant","description":"\u003cstrong\u003eEVIL ENERGY's 8AN fuel line kit is a complete 20 ft CPE nylon‑braided hose system with corrosion‑resistant fittings designed for high‑pressure automotive fluid routing.\u003c\/strong\u003e\n\n\u003cp\u003eThis kit bundles a 20‑foot length of 8AN (0.41\" ID × 0.65\" OD) CPE fuel hose with a selection of swivel hose ends and clamps so you can build custom fuel, oil, or cooler lines without hunting for separate parts. The hose combines a fuel‑resistant inner tube, stainless steel reinforcement, and a rugged nylon braid to withstand heat, pressure, and oil exposure in demanding engine bays. Before ordering, confirm your AN thread size and available installation space — AN and NPT threads are not interchangeable.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose hold up under pressure and temperature?\u003c\/h3\u003e\n\u003cp\u003eThe hose is engineered for moderate to high‑pressure systems: a 750 PSI working pressure and a 2,250 PSI burst rating provide a safety margin for many automotive uses. Temperature resilience ranges from -22°F to 248°F, covering typical operating and storage conditions in most climates and engine compartments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 750 PSI for routine operation\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 2,250 PSI for safety margin\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -22°F to 248°F to handle heat and cold\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and how do they simplify installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes 20 feet of 8AN CPE nylon‑braided hose, ten swivel hose ends in straight and angled configurations, and two hose separator clamps to organize runs. Having multiple fitting angles (straight, 45°, 90°, 180°) reduces the need for adapters and makes tight routing easier while the swivel ends help align connections without twisting the hose.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20 ft of 8AN hose for custom lengths and routing\u003c\/li\u003e\n  \u003cli\u003e10 aluminum alloy swivel ends: 4 straight, 2 × 45°, 2 × 90°, 2 × 180°\u003c\/li\u003e\n  \u003cli\u003eTwo clamps to secure and separate hoses for a tidy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids are compatible and which should be avoided?\u003c\/h3\u003e\n\u003cp\u003eThe CPE inner tube is compatible with gasoline, diesel, race gas, engine oil, transmission fluid, hydraulic fluid, and vacuum applications, making it versatile for fuel and oil systems. Notably, this hose is not rated for ethanol blends like E85 or E10, nor for methanol — using those fluids can degrade the materials and risk failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable: gasoline (non‑ethanol blends), diesel, engine oil, transmission fluid, hydraulic fluid\u003c\/li\u003e\n  \u003cli\u003eSuitable also for vacuum, cooler lines, and oil feed lines\u003c\/li\u003e\n  \u003cli\u003eNot compatible: E85, E10, methanol — avoid these fuels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the assembly and what materials prevent corrosion?\u003c\/h3\u003e\n\u003cp\u003eThe hose features a three‑layer construction: a fuel‑resistant CPE inner tube, 304 stainless steel reinforcement for pressure resistance, and an outer nylon braid that protects against abrasion and heat. The included swivel fittings are machined from aluminum alloy with corrosion resistance to provide long service life when properly installed and maintained.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner tube: CPE rubber for chemical resistance\u003c\/li\u003e\n  \u003cli\u003eReinforcement: 304 stainless steel braid for strength\u003c\/li\u003e\n  \u003cli\u003eOuter layer: nylon braid for abrasion and heat protection\u003c\/li\u003e\n  \u003cli\u003eFittings: aluminum alloy to resist corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: This EVIL ENERGY 8AN fuel line kit suits mechanics, fabricators, and enthusiasts building or repairing fuel supply, return, cooler, vacuum, or oil feed systems where custom lengths and multiple fitting angles speed installation. It's ideal for projects using conventional gasoline, diesel, or oil-based fluids but not for ethanol‑heavy or methanol systems. Always confirm AN thread compatibility and routing clearances before cutting or assembling the hose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose be used with E85 or methanol?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The CPE hose is not compatible with E85, E10, or methanol and should not be used with ethanol‑heavy fuels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included fittings AN or NPT threads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit uses 8AN (3\/4-16 UNF) swivel fittings; AN and NPT threads are not interchangeable.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584976683193,"sku":"B081W9XRNJ","price":211.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-8an-fuel-line-kit.jpg?v=1790461760"},{"product_id":"evil-energy-10an-braided-fuel-line-kit-20ft-cpe-hose-with-12-an-fittings-625-psi-durable","title":"EVIL ENERGY 10AN Braided Fuel Line Kit 20ft CPE Hose with 12 AN Fittings, 625 PSI Durable","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's 10AN braided fuel line kit is a 20-foot CPE rubber hose with 304-steel and nylon braid plus 12 aluminum AN fittings, built for high-pressure fuel, oil, transmission and vacuum applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit supplies a long run of 10AN (ID 0.53\" \/ OD 0.79\") braided hose plus swivel hose ends in multiple angles, clamps and accessories so you can route fuel, oil, transmission cooling or vacuum lines with durable, heat- and pressure-rated components. The hose combines a chemically resistant CPE inner liner with layered 304 stainless wire and an abrasion-resistant nylon outer braid, while the anodized aluminum alloy fittings swivel for easier installations. The kit’s ratings and included fittings make it suitable for performance, marine, industrial and maintenance tasks where a resilient, flexible line is needed.\u003c\/p\u003e\n\n\u003ch3\u003eWhat materials and pressure ratings does this 10AN hose use?\u003c\/h3\u003e\n\u003cp\u003eThe hose core is CPE rubber designed for chemical compatibility with fuels and oils, wrapped in a 304 stainless-steel braid and finished with a protective nylon outer layer. Fittings are machined from aluminum alloy with swivel ends to reduce hose twisting during installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner: CPE rubber for fuel and oil resistance\u003c\/li\u003e\n  \u003cli\u003eBraid: 304 stainless steel wire for strength\u003c\/li\u003e\n  \u003cli\u003eOuter: Nylon braid for abrasion protection\u003c\/li\u003e\n  \u003cli\u003eFittings: Anodized aluminum alloy swivel ends (4 straight, 2 45°, 2 90°, 2 180°)\u003c\/li\u003e\n  \u003cli\u003eMax working pressure: 625 psi; burst pressure: 1875 psi\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -22°F to 248°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and systems can this kit serve?\u003c\/h3\u003e\n\u003cp\u003eThis 10AN braided line is formulated to be compatible with a wide range of automotive and industrial fluids, making it a versatile choice for routing supply, return and cooling lines. It’s commonly used where reliability under pressure and chemical exposure is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel supply and return lines (including race fuels and diesel)\u003c\/li\u003e\n  \u003cli\u003eTransmission oil cooler lines and oil feed lines\u003c\/li\u003e\n  \u003cli\u003eCoolant, hydraulic and vacuum lines where AN fittings are acceptable\u003c\/li\u003e\n  \u003cli\u003eFuel gauge and turbo cooler plumbing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the kit and how does it simplify installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives ready to install with a long continuous hose and a selection of swivel hose ends so you can configure runs without cutting multiple pre-made lengths. Hose separators and clamps help organize runs and prevent chafing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20 feet of 10AN braided hose (ID 0.53\" \/ OD 0.79\")\u003c\/li\u003e\n  \u003cli\u003e10 swivel hose ends: 4 straight, 2 x 45°, 2 x 90°, 2 x 180°\u003c\/li\u003e\n  \u003cli\u003e2 hose separator clamps to secure line routing\u003c\/li\u003e\n  \u003cli\u003eSwivel ends reduce hose twisting and make tight bends easier\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is this hose for long-term use?\u003c\/h3\u003e\n\u003cp\u003eThe combination of CPE core, stainless wire reinforcement and nylon outer braid provides resistance to abrasion, pressure and many common petroleum-based fluids. Pressure and temperature specs indicate suitability for demanding conditions, but correct installation and periodic inspection remain important for safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated to 625 psi working pressure and 1875 psi burst pressure\u003c\/li\u003e\n  \u003cli\u003eOperates between -22°F and 248°F for broad climate use\u003c\/li\u003e\n  \u003cli\u003eStainless braid reduces elongation and improves puncture resistance\u003c\/li\u003e\n  \u003cli\u003eAluminum swivel fittings minimize stress at connection points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: Mechanics, fabricators, race teams, marine technicians and DIY enthusiasts who need a versatile 10AN hose run to handle fuel, oil, transmission cooler, vacuum or hydraulic tasks will find this EVIL ENERGY kit useful. It’s especially helpful when you want a single continuous 20-foot length with various swivel fittings and clamps to build clean, reliable plumbing runs without sourcing components separately. Always follow vehicle and fluid manufacturer guidelines when selecting hose types and install with proper flaring, clamps and torqueing of fittings for safe, leak-free service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose handle diesel and race fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the CPE inner liner and stainless braid are compatible with diesel and many race fuels, but verify compatibility with specific additives.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the fittings swivel to prevent hose twisting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — included aluminum swivel hose ends reduce twist and simplify routing into tight spaces.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584976748729,"sku":"B081W7WQ82","price":224.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-10an-front-packaging.jpg?v=1790461760"},{"product_id":"evil-energy-6an-fuel-line-kit-20-ft-nylon-braided-cpe-hose-with-12-aluminum-swivel-fittings-750-psi","title":"EVIL ENERGY 6AN Fuel Line Kit — 20 ft Nylon-Braided CPE Hose with 12 Aluminum Swivel Fittings, 750 PSI","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 6AN Fuel Line Kit is a complete 20-foot CPE nylon-braided fuel hose system with 12 aluminum alloy fittings designed for high-pressure, oil- and heat-resistant automotive fluid routing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit supplies a long run of 6AN (9\/16-18 UNF) hose and a selection of swivel ends so you can route fuel, oil, or coolant lines across complex engine bays without fabricating adapters. Built with a CPE inner tube, 304 stainless steel reinforcement, and a braided nylon outer jacket, the line balances flexibility with strength for automotive and racing applications. The package includes two hose separator clamps to keep runs tidy and reduce chafing during installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat materials and specifications define this 6AN fuel hose?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose combines a chemical-resistant CPE liner, stainless steel braided reinforcement, and a nylon outer braid to resist heat, pressure, and oil exposure. Size and pressure ratings matter when replacing lines, and this assembly is sized and rated for many performance uses.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInner\/outer dimensions: 0.31\" ID × 0.56\" OD (8 mm × 14.3 mm)\u003c\/li\u003e\n  \u003cli\u003eLength: 20 ft of continuous hose\u003c\/li\u003e\n  \u003cli\u003eThread standard: 6AN (9\/16-18 UNF)\u003c\/li\u003e\n  \u003cli\u003eWorking pressure: 750 PSI; burst pressure: 2250 PSI\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -22°F to 248°F (-30°C to 120°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the included fitting assortment help with routing in tight engine bays?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit's fittings offer multiple swivel angles so you can create smooth transitions and avoid sharp bends that reduce flow or stress hose ends. Swivel hose ends also allow tighter seal alignment during assembly and help accommodate misaligned connection points without rotating the hose body.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e10 swivel hose ends: 4 straight, 2 × 45°, 2 × 90°, and 2 × 180°\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy fittings resist corrosion and are lightweight for performance use\u003c\/li\u003e\n  \u003cli\u003eSwivel design reduces twisting during installation for a more reliable connection\u003c\/li\u003e\n  \u003cli\u003e2 separator clamps keep parallel lines spaced and minimize abrasion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fluids and applications is this hose compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eDesigned for many automotive and industrial fluids, this CPE-lined, nylon-braided hose is suitable for fuel return\/supply, oil feeds, transmission cooler lines, and vacuum lines. Be aware of chemical limitations: this product does not support fuels with high alcohol content.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible: gasoline (not E10\/E85), diesel, race gas, engine oil, transmission fluid, hydraulic fluid\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for vacuum lines, fuel gauge lines, turbo cooler lines, and coolant routing\u003c\/li\u003e\n  \u003cli\u003eNot compatible with E85, E10, or methanol-based fuels\u003c\/li\u003e\n  \u003cli\u003eVerify AN thread and space constraints before installation—AN and NPT are not interchangeable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable is the hose under performance conditions?\u003c\/h3\u003e\n\n\u003cp\u003eThe three-layer construction is intended to withstand repeated exposure to heat, oil, and system pressure while maintaining flexibility for routing. Stainless steel reinforcement provides burst resistance, while the braided nylon outer jacket protects against abrasion and UV exposure in exposed engine compartments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e304 stainless steel layer increases tensile and burst strength\u003c\/li\u003e\n  \u003cli\u003eCPE inner tube resists oil and common automotive fluids\u003c\/li\u003e\n  \u003cli\u003eNylon braid outer protects from abrasion and weathering\u003c\/li\u003e\n  \u003cli\u003eAluminum fittings minimize corrosion and add lightweight durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This EVIL ENERGY 6AN fuel line kit is best suited for car and motorcycle owners, track and race teams, fabricators, and hobbyists who need a flexible, high-pressure hose run with multiple fitting angles. If you require compatibility with alcohol-blended fuels, or if your system uses NPT fittings, choose parts matched to those specifications instead. Always confirm AN size, thread type, and installation clearance before ordering and follow safe installation practices.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this 6AN hose safe for E85 fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This CPE-lined hose is not compatible with E85, E10, or methanol blends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the fittings AN or NPT threads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fittings are 6AN (9\/16-18 UNF). AN and NPT threads are not interchangeable.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584976781497,"sku":"B081W79ZC1","price":175.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-6an-fuel-line-kit.jpg?v=1790461759"},{"product_id":"evil-energy-6an-ls-swap-fuel-line-kit-20ft-cpe-braided-hose-58-psi-regulator-10µm-filter","title":"EVIL ENERGY 6AN LS Swap Fuel Line Kit — 20FT CPE Braided Hose, 58 PSI Regulator \u0026 10µm Filter","description":"\u003cstrong\u003eEVIL ENERGY's 6AN LS Swap Fuel Line Kit is a complete 20-foot CPE braided hose system with fittings, a 58 PSI regulator and integrated 10-micron filter engineered for LS engine swaps and EFI setups.\u003c\/strong\u003e\n\nSwitching an LS motor or upgrading to EFI requires reliable fuel delivery and filtration; this kit combines 6AN stainless-braided hose, aluminum fittings, and a pre-set 58 PSI regulator with a built-in 10-micron element so you can route, connect and protect the system without sourcing multiple parts. The hose construction and component choices prioritize abrasion resistance and pressure capacity while keeping installation straightforward for fabricators, engine builders and experienced DIYers.\n\n\u003ch3\u003eHow does this kit suit LS swap and EFI fuel systems?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses 6AN braided hose and fittings sized to common LS feed and return requirements, making it appropriate for many aftermarket EFI and LS conversion layouts. The included regulator is tuned to a 58 PSI output, a value compatible with a range of high-flow pumps and EFI setups where a stable supply pressure is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20 feet of 6AN CPE inner hose for flexible routing and long runs\u003c\/li\u003e\n  \u003cli\u003eAluminum AN-style fittings and swivel hose ends for leak-resistant connections\u003c\/li\u003e\n  \u003cli\u003e58 PSI regulator with integrated 10-micron filter for consistent pressure and particulate control\u003c\/li\u003e\n  \u003cli\u003eHose ID 0.31\" and OD 0.56\"—common sizing for many EFI feed lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and operating limits should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe hose assembly uses a CPE rubber inner tube reinforced with 304 stainless steel wire and a nylon outer braid, offering abrasion and pressure resistance suitable for general fuels and oil-cooling uses. The kit is rated for a wide temperature range and high working pressures, but it is not specified for ethanol blends like E85.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner CPE layer for fuel compatibility and flexibility\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel reinforcement and nylon braid for mechanical protection\u003c\/li\u003e\n  \u003cli\u003eWorking pressure up to 750 PSI; burst pressure approximately 2250 PSI\u003c\/li\u003e\n  \u003cli\u003eOperational temperatures from -22°F to 248°F; not recommended for E85\/ethanol\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and how do they simplify installation?\u003c\/h3\u003e\n\u003cp\u003eThe package arrives with everything needed to assemble and mount a complete feed run: hose, swivel ends, adapters, mounting clamps and a wrench for the fittings. That means fewer trips to parts stores and a consistent set of connectors designed to match the hose diameter and AN styling used in many performance fuel systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20FT of pre-braided 6AN hose ready to cut to length\u003c\/li\u003e\n  \u003cli\u003e10 swivel hose ends and 3 adapter fittings for common connection needs\u003c\/li\u003e\n  \u003cli\u003e2 hose separator clamps for clean routing and vibration control\u003c\/li\u003e\n  \u003cli\u003e58 PSI regulator with built-in 10-micron filter and installation wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThis EVIL ENERGY kit is aimed at experienced mechanics, fabricators and enthusiasts performing LS swaps, converting carbureted platforms to EFI or building high-performance fuel systems that need a robust, ready-made hose and regulator package. It's best used by people who understand pressure ratings and fuel compatibility (note: avoid ethanol blends like E85), and by installers prepared to trim, fit and secure braided hoses and AN fittings during custom routing and mounting tasks.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with E85 or ethanol fuels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The CPE braided hose is not recommended for E85 or ethanol blends; it's compatible with gasoline, diesel and similar fuels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure does the regulator output and filter size?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The regulator is preset to 58 PSI and includes a 10-micron fuel filter element to catch contaminants.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67584978845881,"sku":"B0D83MN7F8","price":231.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-and-components.jpg?v=1790461893"},{"product_id":"evil-energy-8an-ptfe-fuel-line-kit-20ft-black-e85-safe-nylon-braid-1-500-psi-working","title":"EVIL ENERGY 8AN PTFE Fuel Line Kit 20ft Black — E85-safe Nylon Braid, 1,500 PSI Working","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 8AN PTFE Fuel Line Kit is a 20-foot, AN8 (8AN) inner-diameter PTFE fuel hose with a nylon braid that handles E85 and high-temperature, high-pressure automotive fuel systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis fuel line kit pairs a chemically inert PTFE inner tube with a protective nylon braided outer layer to give a reliable path for gasoline, E85, and other automotive fluids. It’s built to withstand harsh temperatures from -76°F to 446°F (-60°C to 230°C) and rated for everyday service pressures up to 1,500 PSI (burst 4,500 PSI). The hose is relatively stiff by design, so planning routing and using correct AN fittings is important for a professional installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the EVIL ENERGY PTFE hose perform with E85 and modern fuels?\u003c\/h3\u003e\n\n\u003cp\u003eThe PTFE inner liner resists chemical attack from ethanol-blended fuels like E85, as well as gasoline, diesel, oils, and most coolants. Its inert surface reduces swelling and degradation that would affect rubber hoses, making it a dependable option for ethanol-rich fuels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: PTFE inner tube resists ethanol and aggressive fuels.\u003c\/li\u003e\n  \u003cli\u003eCompatibility: Safe for gasoline, E85, diesel, lubricants, and coolants.\u003c\/li\u003e\n  \u003cli\u003eDurability: Nylon braid protects against abrasion and external wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the size, temperature and pressure specifications I should plan around?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose ID is 13\/32\" (0.39 inch) with an outside diameter of 0.55 inch and comes in a 20 ft (6 m) length—measure your required run before cutting. It functions across a wide temperature window and is rated to 1,500 PSI working pressure, with a 4,500 PSI burst rating for safety margin in demanding environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 13\/32\" (0.39 in); outer diameter: 0.55 in.\u003c\/li\u003e\n  \u003cli\u003eLength: 20 ft (6 m) - cut-to-fit for custom installs.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -76°F to 446°F (-60°C to 230°C); working pressure: 1,500 PSI; burst: 4,500 PSI.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and route this PTFE fuel hose safely?\u003c\/h3\u003e\n\n\u003cp\u003ePTFE hose is firmer than rubber lines, so it cannot be folded sharply or bent in half without risk of damage. Use proper AN fittings and support clamps; avoid tight bends and heat sources, and consider a professional installation if you are unfamiliar with AN plumbing or high-pressure fuel systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not fold; maintain gradual bends and avoid kinking.\u003c\/li\u003e\n  \u003cli\u003eUse AN8-compatible fittings and secure clamps for vibration resistance.\u003c\/li\u003e\n  \u003cli\u003eKeep clear of extreme heat sources and sharp edges; trim with appropriate tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hose work on racecars, street cars, or custom builds?\u003c\/h3\u003e\n\n\u003cp\u003eYes—its resistance to chemicals, wide temperature tolerance, and high pressure rating make it suitable for motorsport and performance street use where ethanol fuels or high-pressure pumps are present. Because of its stiffness, it’s ideal when routed with pre-planned paths and proper fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon uses: fuel delivery lines, feed\/return systems, and performance applications.\u003c\/li\u003e\n  \u003cli\u003eRecommended: plan routing and use professional-grade AN fittings.\u003c\/li\u003e\n  \u003cli\u003eNot suited for applications requiring extreme flexibility or folding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This EVIL ENERGY 8AN PTFE fuel line kit is aimed at builders, tuners, and mechanics who need a chemically compatible, high-pressure hose for E85 and other aggressive fuels. It’s a strong choice for performance vehicles, custom installations, and anyone replacing aging rubber lines with a long-lasting PTFE solution—provided you plan fittings and routing or work with a professional installer.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for E85 fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PTFE inner tube resists ethanol and is compatible with E85, gasoline, diesel, lubricants, and coolants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I bend or fold the PTFE hose tightly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The hose is relatively stiff—avoid tight bends or folding and use gradual curves and proper fittings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585000112313,"sku":"B0922KVTWC","price":248.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-8an-front-packaging.jpg?v=1790462873"},{"product_id":"evil-energy-marine-fuel-hose-3-8-x-25ft-sae-j1527-type-a1-low-permeation-uv-resistant","title":"EVIL ENERGY Marine Fuel Hose 3\/8\" x 25ft — SAE J1527 Type A1, Low-Permeation \u0026 UV-Resistant","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 3\/8\" Marine Fuel Line Hose Type A1-15 is a 25-foot, SAE J1527-compliant rubber fuel hose built for boats and marine engines, offering low permeation, UV resistance, and compatibility with gasoline, diesel and E85.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis heavy-duty marine fuel hose combines a nitrile inner layer with an NBR+PVC outer cover and a polyester braid to deliver reliable fuel delivery in recreational boating and light commercial marine settings. Engineered to satisfy industry standards for low emissions and safety, the hose balances flexibility for tight routing with working pressures suitable for small engine fuel systems.\u003c\/p\u003e\n\n\u003ch3\u003eWhat specifications define this 3\/8\" marine fuel hose?\u003c\/h3\u003e\n\u003cp\u003eThe hose has a 3\/8\" (9.8 mm) internal diameter and a 16.2 mm outer diameter, with a total length of 25 feet. Its minimum bending radius is 80 mm, making it manageable for typical engine bays and bilge layouts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 3\/8\" (9.8 mm)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 16.2 mm\u003c\/li\u003e\n  \u003cli\u003eLength: 25 ft (7.62 m)\u003c\/li\u003e\n  \u003cli\u003eMinimum bending radius: 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is this hose for marine use?\u003c\/h3\u003e\n\u003cp\u003eConstructed with an NBR (nitrile) inner tube and an NBR+PVC outer cover reinforced by polyester braid, the hose resists fuel degradation and external wear. It meets SAE J1527 Type A1-15, ISO 7840 Type A1, and NMMA\/CE-accepted criteria and complies with W\/EPA and CARB very low permeation limits for reduced evaporative emissions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterials: NBR inner, NBR+PVC outer, polyester braid\u003c\/li\u003e\n  \u003cli\u003eStandards: SAE J1527 Type A1-15 and ISO 7840 Type A1\u003c\/li\u003e\n  \u003cli\u003ePermeation: Meets W\/EPA and CARB low-permeation requirements\u003c\/li\u003e\n  \u003cli\u003eResistance: Weather- and UV-resistant cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pressure and temperature ranges can it handle?\u003c\/h3\u003e\n\u003cp\u003eThe hose is rated for a maximum working pressure of 300 PSI with a burst pressure up to 900 PSI, giving a wide safety margin for most small craft fuel systems. It performs across a broad temperature span, suitable for temperate and colder conditions encountered in recreational boating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum working pressure: 300 PSI\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 900 PSI\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -20°F to 221°F (-30°C to 105°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fuels and applications are appropriate for this hose?\u003c\/h3\u003e\n\u003cp\u003eThis reel of marine-grade hose is compatible with gasoline, diesel, E85, and similar liquid fuels, making it useful for outboard, inboard, and auxiliary engine fuel lines. Its Type A1-15 classification and low-permeation performance make it suitable for pleasure boats and many marine installations where regulatory compliance matters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible fuels: Gasoline, diesel, E85 and like fuels\u003c\/li\u003e\n  \u003cli\u003eCommon uses: Boat fuel supply, engine connections, small fuel systems\u003c\/li\u003e\n  \u003cli\u003eCompliance: Meets pleasure-boat Type A1-15 requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Boaters, marine mechanics, and DIYers who need a dependable, regulation-friendly fuel hose for recreational craft will find this EVIL ENERGY 3\/8\" Type A1-15 hose well suited to their needs. It is aimed at users who prioritize compliance, reduced evaporative loss, and a flexible hose that can be routed through compact engine compartments. If you need a long 25-foot length for spares, refits, or installing multiple runs, this hose provides a balance of strength, chemical compatibility and marine-grade construction.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for ethanol blends like E85?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The NBR inner tube and construction are compatible with gasoline, diesel and E85 for typical marine fuel systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it meet marine regulatory standards?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It meets SAE J1527 Type A1-15, ISO 7840 Type A1, and W\/EPA and CARB very low permeation requirements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585001914553,"sku":"B0B6TSBBGS","price":174.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-coil.jpg?v=1790462964"},{"product_id":"evil-energy-10an-braided-fuel-line-kit-10ft-cpe-nylon-hose-with-10an-swivel-fittings-625-psi","title":"EVIL ENERGY 10AN Braided Fuel Line Kit — 10FT CPE Nylon Hose with 10AN Swivel Fittings, 625 PSI","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 10AN Fuel Line Kit is a complete 10-foot braided CPE fuel hose system with aluminum 10AN swivel fittings and clamps for fuel, oil, coolant and vacuum lines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit supplies a ready-to-install, heavy-duty line solution for performance and maintenance projects. Built with a CPE rubber core, 304 stainless-steel wire reinforcement and a nylon outer braid, the hose balances flexibility and abrasion resistance for engine bays, oil coolers and return lines. The package bundles swivel hose ends in multiple angles, separators and adapters so you can route and secure lines without sourcing separate fittings.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is the EVIL ENERGY 10AN hose for workshop and track use?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose combines a chemical-resistant CPE inner tube with stainless steel wire reinforcement and a nylon outer braid to resist chafing and pressure cycles. Rated for a maximum working pressure of 625 psi and a burst pressure of 1875 psi, it covers most automotive fluid duties where 10AN size is appropriate.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCPE inner tube resists fuels, oils and hydraulic fluids.\u003c\/li\u003e\n  \u003cli\u003e304 steel wire reinforcement adds tensile strength and pressure resistance.\u003c\/li\u003e\n  \u003cli\u003eNylon braid improves abrasion resistance and heat shielding.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: −22°F to 248°F for varied environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings and accessories are included, and will they simplify installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes ten 10AN swivel hose ends in four orientations (straight, 45°, 90°, 180°), two 10AN-to-10AN adapters, six hose separator clamps and one 10-foot length of braided hose. Having multiple angled ends and clamps on hand reduces the need to modify fittings mid-install and helps create clean, leak-free runs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e10 swivel hose ends: 4 straight, 2 x 45°, 2 x 90°, 2 x 180° for routing options.\u003c\/li\u003e\n  \u003cli\u003e2 × 10AN-to-10AN fittings for joining or adapting lines.\u003c\/li\u003e\n  \u003cli\u003e6 separator clamps keep hoses organized and isolated from hot surfaces.\u003c\/li\u003e\n  \u003cli\u003e10-foot braided hose with 0.53\" ID and 0.79\" OD for common 10AN applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and systems can this 10AN kit be used for?\u003c\/h3\u003e\n\n\u003cp\u003eThis hose and fitting set is suitable for fuel supply and return lines, transmission oil cooler lines, turbo cooler lines, oil feed lines, vacuum lines, coolant circulation and fuel gauge lines. The materials are compatible with gasoline, diesel, transmission fluid, hydraulic fluids and many oils, but always verify compatibility with specific chemicals before long-term use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFuel supply and return for performance engines and fuel systems.\u003c\/li\u003e\n  \u003cli\u003eTransmission and oil cooler feed\/return lines.\u003c\/li\u003e\n  \u003cli\u003eTurbo oil cooler and oil feed lines under moderate pressure.\u003c\/li\u003e\n  \u003cli\u003eVacuum, gauge and coolant circulation where 10AN size fits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, mechanics and DIY enthusiasts who need a robust, versatile 10AN line kit will find this set convenient for custom routing and repairs. It suits track-day or street performance builds, maintenance of oil and transmission cooler lines, and retrofit projects where a durable, heat-tolerant hose with multiple swivel fittings saves time. For demanding chemical or extremely high-temperature applications, confirm fluid compatibility and consider dedicated hoses specified for those environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the EVIL ENERGY 10AN hose compatible with gasoline and diesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CPE inner tube and materials are compatible with gasoline and diesel, but verify with your specific fuel type for long-term use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the pressure and temperature limits for this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Maximum working pressure is 625 psi, burst pressure 1875 psi, and temperature range is −22°F to 248°F.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585002045625,"sku":"B0CQK29TCK","price":181.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-10an-front-assembly.jpg?v=1790462967"},{"product_id":"evil-energy-8an-fuel-line-kit-20ft-cpe-nylon-braided-hose-with-aluminum-fittings-750-psi","title":"EVIL ENERGY 8AN Fuel Line Kit 20FT — CPE Nylon-Braided Hose with Aluminum Fittings, 750 psi","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's 8AN Fuel Line Kit is a complete 20-foot CPE nylon-braided hose and aluminum fitting set engineered for high-pressure fuel, oil, and coolant routing in performance and maintenance applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit supplies a durable 8AN (0.41\" ID \/ 0.64\" OD) hose with stainless and nylon braiding plus a variety of swivel fittings and clamps so you can build or repair fuel, return, cooler, or vacuum lines without sourcing separate components. Rated for a maximum working pressure of 750 psi and a wide temperature band, it’s designed to handle automotive fluids where flexibility, abrasion resistance, and secure connections are necessary.\u003c\/p\u003e\n\n\u003ch3\u003eWhat components are included and how do they fit together?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains pre-measured hose plus swivel ends, adapters, and clamps so you can cut and assemble runs to match your layout. Fittings use aluminum alloy swivel ends to ease routing, while the hose features a CPE inner core with 304 stainless wire and nylon outer braid for strength and abrasion protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e20 feet of 8AN hose (0.41\" inner, 0.64\" outer)\u003c\/li\u003e\n  \u003cli\u003e10 swivel hose ends: 4 straight, 2×45°, 2×90°, 2×180°\u003c\/li\u003e\n  \u003cli\u003e2 × 8AN to 8AN adapter fittings for inline joins\u003c\/li\u003e\n  \u003cli\u003e6 hose separator\/clamp pieces for secure mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and heat-resistant is the hose for demanding conditions?\u003c\/h3\u003e\n\u003cp\u003eThis hose combines a CPE rubber inner tube with a 304 stainless wire reinforcement and a nylon outer braid to resist wear, kinking, and fuel exposure. It’s specified for a temperature range from -22°F to 248°F and a bursting pressure approximately three times the working rating, offering resilience under thermal and mechanical stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum working pressure: 750 psi\u003c\/li\u003e\n  \u003cli\u003eBursting pressure: 2250 psi\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -22°F to 248°F\u003c\/li\u003e\n  \u003cli\u003eConstruction: CPE inner + 304 steel wire + nylon braid\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and uses are appropriate for this 8AN line?\u003c\/h3\u003e\n\u003cp\u003eThe materials are compatible with many automotive and performance fluids, making the kit versatile for supply and return systems, cooler lines, and vacuum or gauge lines. Avoid prolonged contact with incompatible solvents and always verify compatibility with your specific fluid chemistry before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable: gasoline, race gas, diesel, transmission fluid, oil, hydraulic fluid, coolant, vacuum\/gauge lines\u003c\/li\u003e\n  \u003cli\u003eCommon uses: fuel supply\/return, turbo cooler lines, oil feed, transmission cooler hose\u003c\/li\u003e\n  \u003cli\u003eNot recommended for unknown aggressive chemicals without testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and customize length on a vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe kit is built for field assembly: cut the hose to the desired length, slip on the swivel fittings, and clamp in place. Swivel fittings in multiple angles let you route around tight corners without twisting the hose, and included separator clamps help secure runs to chassis or engine mounts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-to-length hose for custom routing\u003c\/li\u003e\n  \u003cli\u003eSwivel fittings: straight, 45°, 90°, 180° for flexibility\u003c\/li\u003e\n  \u003cli\u003eSeparator clamps included for tidy mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? EVIL ENERGY’s 8AN Fuel Line Kit targets enthusiasts, mechanics, and fabricators who need a robust, adaptable hose assembly for high-flow fuel systems, oil or transmission cooler lines, turbo plumbing, and general performance applications. If you require a professional-grade 8AN line that can be trimmed and fitted on-site with multiple angle connectors and secure mounting, this kit delivers the core components to build dependable runs without sourcing parts individually.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose handle race fuel or diesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—materials are compatible with gasoline, race gas, and diesel, but confirm compatibility for exotic additives before prolonged use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hose-cutting tools and a wrench for the aluminum fittings are sufficient; no crimping machine is required for these swivel ends.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585002209465,"sku":"B0CQK37L2J","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-8an-kit-front-packaging.jpg?v=1790462964"},{"product_id":"evil-energy-10an-fuel-line-kit-20ft-nylon-braided-cpe-hose-with-aluminum-fittings","title":"EVIL ENERGY 10AN Fuel Line Kit 20FT — Nylon‑Braided CPE Hose with Aluminum Fittings","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 10AN Fuel Line Kit is a complete 20-foot CPE nylon-braided hose and aluminum fitting kit designed for fuel, oil, transmission, and coolant routing in automotive and racing applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit supplies a durable, flexible 10AN (0.53\" ID \/ 0.79\" OD) hose with a protective nylon and 304 stainless steel braid over a CPE rubber core, plus swivel aluminum fittings and mounting clamps. Built for demanding environments, the assembly withstands a wide temperature span and high pressures, making it suitable for custom plumbing, repair, or performance upgrades where reliable fluid delivery matters.\u003c\/p\u003e\n\n\u003ch3\u003eHow strong and heat-resistant is this 10AN fuel hose kit?\u003c\/h3\u003e\n\u003cp\u003eThe hose is rated for a maximum working pressure of 750 psi and a burst pressure up to 2250 psi, and it operates across a broad temperature range from -22°F to 248°F. Construction combines a CPE inner layer with a 304 stainless steel reinforcement and nylon outer braid for abrasion resistance and dimensional stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 750 psi — suitable for many fuel and oil systems.\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 2250 psi — safety margin for demanding use.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -22°F to 248°F — handles cold starts and high-heat environments.\u003c\/li\u003e\n  \u003cli\u003eMaterials: CPE core, 304 steel braid, nylon outer braid for durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings and hardware are included, and how do they fit?\u003c\/h3\u003e\n\u003cp\u003eThe package contains ten 10AN swivel hose ends in multiple angles, two 10AN-to-10AN adapters, and six hose separator clamps to organize and secure runs. Fittings are aluminum alloy and designed to thread onto the braided hose ends to create leak-resistant connections for 10AN plumbing setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded fittings: 4 straight, 2×45°, 2×90°, 2×180° swivel hose ends for versatile routing.\u003c\/li\u003e\n  \u003cli\u003eAdapters: 2× 10AN-to-10AN for inline connections or repairs.\u003c\/li\u003e\n  \u003cli\u003eClamps: 6 hose separator clamps to mount and space hoses neatly.\u003c\/li\u003e\n  \u003cli\u003eLength: 20 feet of 10AN braided hose (0.53\" ID, 0.79\" OD) for multiple runs or long runs split.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids is the EVIL ENERGY 10AN hose compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe CPE inner tube and stainless\/nylon braid make this hose suitable for a wide range of automotive fluids, including gasoline (race gas), diesel, transmission fluid, engine oil, coolant, vacuum lines, and hydraulic or turbo cooler lines. Always verify compatibility with specialty additives before long-term use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: fuel, race gas, diesel, transmission fluid, engine oil, coolant.\u003c\/li\u003e\n  \u003cli\u003eSuitable also for: vacuum lines, oil feed, turbo cooler, and fuel gauges lines.\u003c\/li\u003e\n  \u003cli\u003eNot for: unspecified aggressive chemicals — consult manufacturer specs first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The EVIL ENERGY 10AN Fuel Line Kit is aimed at mechanics, performance builders, race teams, and DIY car enthusiasts who need rugged, adaptable 10AN plumbing for fuel delivery, oil or transmission cooling, and custom fluid routing. It’s a practical choice when you want a ready-to-install hose supply with multiple swivel fittings, clamps, and adapters that support high pressure and varied temperatures without fabricating hoses from scratch.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose handle race fuel and diesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CPE core and braid are compatible with race gas and diesel, but verify specific additives before prolonged use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut the 20ft hose to length and reattach fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit’s swivel hose ends are designed to be fitted to cut hose ends for custom-length runs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585002471609,"sku":"B0CQK4WHCY","price":223.61,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-10an-front-packaging_77215efc-b3f8-47a1-b41c-a8b7e84039f9.jpg?v=1790462988"},{"product_id":"evil-energy-19-row-10an-oil-cooler-universal-aluminum-stacked-plate-compact-12-9-6-7","title":"EVIL ENERGY 19-Row 10AN Oil Cooler — Universal Aluminum Stacked-Plate, Compact 12.9\"×6.7\"","description":"\u003cstrong\u003eEVIL ENERGY's 19-row 10AN oil cooler is a universal aluminum stacked-plate cooler designed to reduce engine oil temperatures for engines, transmissions, and differentials.\u003c\/strong\u003e\n\n\u003cp\u003eIf you're upgrading cooling capacity or adding an external oil cooler, this compact 19-row unit delivers a high-efficiency stacked-plate design in a lightweight aluminum housing. It holds 0.45 liters of oil, fits most vehicles that can accommodate its 12.91\" × 6.67\" × 1.97\" footprint, and uses 10AN fittings for common performance plumbing. The kit is pressure tested to 116 PSI and has a burst rating of 232 PSI, making it suitable for street and light-performance applications when installed with adequate airflow.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this oil cooler change my engine's operating temperatures?\u003c\/h3\u003e\n\u003cp\u003eThe stacked-plate construction increases surface area for heat exchange, so oil passing through sheds heat faster than in a factory line. This stabilizes oil temperature during sustained loads, which helps preserve oil viscosity and prolong component life when combined with proper maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e19 stacked cooling rows maximize contact area for faster heat transfer.\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy body conducts heat efficiently while remaining lightweight.\u003c\/li\u003e\n  \u003cli\u003e0.45 L internal capacity adds a modest reservoir to the oil circuit.\u003c\/li\u003e\n  \u003cli\u003eMount where airflow is strong — front bumper or behind grille for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the EVIL ENERGY cooler fit my vehicle and what do I need to check?\u003c\/h3\u003e\n\u003cp\u003eThis unit is sold as a universal cooler and will fit many cars, trucks, and custom builds, but you must confirm physical clearance and bracket compatibility. The cooler requires a mounting area larger than 12.91\" × 6.67\" × 1.97\" and may need additional fittings or hoses depending on your engine's plumbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm installation space is larger than the cooler dimensions before ordering.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 330mm engine oil cooler brackets; additional brackets may be required.\u003c\/li\u003e\n  \u003cli\u003eUses 10AN ports — adapters or hose ends may be necessary for some systems.\u003c\/li\u003e\n  \u003cli\u003eInstructions included to aid placement and secure mounting orientation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and durability ratings I should know?\u003c\/h3\u003e\n\u003cp\u003eImportant performance numbers are the internal oil capacity and the pressure ratings achieved during testing. These figures help you assess suitability for your vehicle and expected operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize: 12.91\" × 6.67\" × 1.97\" — compact profile for tight installations.\u003c\/li\u003e\n  \u003cli\u003eOil capacity: 0.45 liters, suitable for supplemental cooling circuits.\u003c\/li\u003e\n  \u003cli\u003eTest pressure: 116 PSI; burst pressure: 232 PSI — verified for strength.\u003c\/li\u003e\n  \u003cli\u003eConstructed from aluminum alloy for corrosion resistance and thermal conductivity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and where should I mount it?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with basic plumbing and vehicle mounting. Place the cooler where it receives consistent airflow and route hoses to avoid sharp bends or heat sources; the kit includes instructions to guide the install.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount in front of the radiator or behind grille for optimal airflow.\u003c\/li\u003e\n  \u003cli\u003eAvoid contact with hot exhaust components and moving parts.\u003c\/li\u003e\n  \u003cli\u003eSome vehicles need additional fittings or custom hoses — plan accordingly.\u003c\/li\u003e\n  \u003cli\u003eFollow included instructions and torque recommendations for fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The EVIL ENERGY 19-row 10AN oil cooler is aimed at enthusiasts and DIY mechanics who need a compact, efficient external cooler for engines, transmissions, or differentials. It's a good match for performance street cars, tow rigs, or any vehicle experiencing sustained high-load operation where extra oil cooling would help maintain stable lubrication temperatures. If you need a universal aluminum cooler with verified pressure ratings and 10AN plumbing, this unit offers a practical balance of size, capacity, and heat-transfer performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this oil cooler fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Possibly—confirm at least 12.91\" × 6.67\" × 1.97\" clearance and compatible 10AN plumbing; extra fittings may be needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure can this cooler handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is pressure tested to 116 PSI with a burst rating of 232 PSI, suitable for typical performance use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585006534841,"sku":"B085MC681B","price":231.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-oil-cooler.jpg?v=1790463217"},{"product_id":"evil-energy-30-row-oil-cooler-10an-stacked-plate-black-aluminum-compact-high-efficiency","title":"EVIL ENERGY 30-Row Oil Cooler 10AN Stacked-Plate, Black Aluminum — Compact High-Efficiency","description":"\u003cp\u003e\u003cstrong\u003eThe EVIL ENERGY 30-row stacked-plate oil cooler is a compact, high-efficiency aluminum radiator designed to lower operating oil temperatures for engines, transmissions, and differentials.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis lightweight, black-anodized cooler pairs 30 stacked plates with 10AN fittings to provide increased cooling capacity in limited spaces. Built from aluminum alloy and pressure-tested to industry-relevant levels, the cooler is intended as a universal upgrade for many vehicles when sufficient mounting space is available. It ships with installation instructions and can be adapted to a range of applications with common plumbing and mounting accessories.\u003c\/p\u003e\n\n\u003ch3\u003eHow much cooling capacity does the 30-row stacked-plate design provide?\u003c\/h3\u003e\n\u003cp\u003eThe 30-row stacked-plate configuration increases surface area and turbulence for better heat transfer compared with single-pass cores. While actual temperature drop depends on flow rate and airflow across the cooler, the design supports sustained cooling for oil capacity up to about 0.74 liters in the core.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOil core volume: 0.74 L for the central cooling chamber\u003c\/li\u003e\n  \u003cli\u003eTest pressure: 116 PSI, burst-tested to 232 PSI for structural reliability\u003c\/li\u003e\n  \u003cli\u003e30 stacked plates maximize surface contact and conduction\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy construction promotes rapid heat dissipation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings, size, and mounting should I plan for?\u003c\/h3\u003e\n\u003cp\u003eThis cooler uses 10AN threaded fittings and measures approximately 12.91\" × 10.04\" × 1.97\", so verify clearance at your chosen mounting location. It’s designed for airflow mounting—typically in front of a radiator, condenser, or in an area with consistent ambient airflow—to achieve best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFittings: 10AN ports for standard braided hose or adapters\u003c\/li\u003e\n  \u003cli\u003eDimensions: 12.91\" × 10.04\" × 1.97\" to confirm fitment\u003c\/li\u003e\n  \u003cli\u003eMounting: secure to a flat surface with airflow exposure for maximum efficiency\u003c\/li\u003e\n  \u003cli\u003eAccessories: hose ends, brackets, or adapters may be required depending on vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this oil cooler easy to install and maintain?\u003c\/h3\u003e\n\u003cp\u003eYes—basic mechanical skills and standard tools are sufficient for most installs; the unit ships with installation guidance. Plan for proper hose routing, secure fittings, and an accessible drain or isolation method when changing oil to avoid spills and ensure routine serviceability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallation instructions included to guide mounting and plumbing\u003c\/li\u003e\n  \u003cli\u003eMount where airflow is consistent and unobstructed for best performance\u003c\/li\u003e\n  \u003cli\u003eUse compatible 10AN hose assemblies and quality clamps for leak-free connections\u003c\/li\u003e\n  \u003cli\u003ePeriodic inspection recommended to check fittings and mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for?\u003c\/p\u003e\n\u003cp\u003eThis EVIL ENERGY 30-row oil cooler suits car owners, performance enthusiasts, and mechanics seeking a compact, high-surface-area cooler to reduce oil temperatures for engines, transmissions, or differentials. It’s a practical upgrade for daily drivers needing improved thermal control, track-focused builds that demand consistent oil temperatures under heavy load, and custom installations where space is limited but efficiency is required. Verify fitment and necessary plumbing or mounting accessories before purchase to ensure a smooth installation.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this oil cooler fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fit depends on available space and hose routing; check the 12.91\"×10.04\"×1.97\" dimensions and plan for 10AN connections.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fluids can I run through the cooler?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for engine oil, transmission fluid, or differential oil; use compatible fluids and confirm viscosity suitability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585033339065,"sku":"B085MCHZSP","price":282.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view.jpg?v=1790464356"},{"product_id":"evil-energy-adjustable-fuel-pressure-regulator-6an-bypass-return-black-30-70-psi-with-gauge","title":"EVIL ENERGY Adjustable Fuel Pressure Regulator 6AN Bypass\/Return — Black, 30–70 PSI with Gauge","description":"\u003cp\u003e\u003cstrong\u003eThe EVIL ENERGY Adjustable Fuel Pressure Regulator is a 6AN bypass\/return regulator that lets you set and stabilize EFI fuel pressure between 30 and 70 PSI for gasoline, E85 and ethanol blends.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis billet-style regulator is designed to suit most electronic fuel injection (EFI) systems where a bypass or return-style setup is used. Finished in black, it includes a top-mounted adjustment screw and a pressure gauge so you can dial in the exact operating pressure. The kit arrives with multiple fittings, fuel line, mounting hardware and port plugs to help adapt the unit to different fuel-rail setups—but note it is not compatible with diesel systems and some braided lines may not support E85.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I adjust and read the fuel pressure on this regulator?\u003c\/h3\u003e\n\u003cp\u003ePressure is set with the accessible adjustment screw on the regulator’s top; turning it clockwise or counterclockwise increases or decreases output. A threaded gauge port and included pressure gauge make it simple to monitor real-time pressure while the engine is running or during setup on a test bench.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable range: 30–70 PSI for precise tuning.\u003c\/li\u003e\n  \u003cli\u003eTop-mounted set screw for easy access without disassembly.\u003c\/li\u003e\n  \u003cli\u003eIncluded pressure gauge screws into the NPT port—use thread sealant tape for a leak-free fit.\u003c\/li\u003e\n  \u003cli\u003eCalibration can be verified under load to ensure stable EFI fuel delivery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fuels and plumbing work with this EVIL ENERGY regulator?\u003c\/h3\u003e\n\u003cp\u003eThis regulator accepts gasoline, E85 and alcohol\/ethanol fuels but is not rated for diesel. Some nylon-braided fuel lines are incompatible with strong ethanol blends, so confirm line compatibility before installing with E85.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible fuels: gasoline, E85, alcohol\/ethanol blends.\u003c\/li\u003e\n  \u003cli\u003eNot for diesel use—use a diesel-specific regulator for diesel systems.\u003c\/li\u003e\n  \u003cli\u003eProvided nylon outer-braid CPE fuel line may not be suitable for E85 long-term.\u003c\/li\u003e\n  \u003cli\u003eUse thread sealant on the gauge NPT port to prevent leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings and parts come with the kit and how are they used?\u003c\/h3\u003e\n\u003cp\u003eThe package contains a complete assortment to adapt the regulator to common EFI plumbing layouts, including AN fittings, port plugs, and a mounting bracket. Some supplied adapters are intended for fuel rail use only and should not be installed directly on the regulator to avoid leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKit includes: regulator, pressure gauge, bracket, AN port plugs and multiple AN fittings.\u003c\/li\u003e\n  \u003cli\u003eFour 6AN to 6AN ORB fittings and one 6AN ORB to 6AN barb fitting for common connections.\u003c\/li\u003e\n  \u003cli\u003eTwo 6AN-to-M fittings (6AN→M12x1.25 and 6AN→M14x1.5) are for fuel rail adapters only.\u003c\/li\u003e\n  \u003cli\u003eThree sections of 6AN nylon outer-braid CPE fuel line for routing and assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The EVIL ENERGY adjustable regulator is aimed at car builders, tuners and DIY mechanics who run aftermarket EFI systems, turbo or boosted applications, or who need precise fuel pressure control for engine tuning. It’s a practical choice when you require a return\/bypass-style regulator with a wide adjustment window, included mounting hardware and fittings for flexible plumbing. If you run diesel or plan to rely on specific braided lines for long-term E85 service, verify compatibility or choose components rated for those fuels before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this regulator with E85 fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the regulator supports gasoline, E85 and ethanol blends, but confirm supplied nylon-braid line compatibility for long-term E85 use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure range can I set with this unit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The adjustable range is 30 to 70 PSI, set via the top adjustment screw and verified with the included pressure gauge.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585036779705,"sku":"B0FBR8CHM1","price":188.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-regulator.jpg?v=1790464510"},{"product_id":"evil-energy-6x5-5-wheel-spacers-2-50mm-for-chevy-gmc-108mm-bore-6061-t6-aluminum-m14x1-5-studs","title":"EVIL ENERGY 6x5.5 Wheel Spacers 2\" (50mm) for Chevy\/GMC – 108mm Bore, 6061-T6 Aluminum, M14x1.5 Studs","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 2\" (50 mm) 6x5.5 wheel spacers convert your truck's bolt pattern while widening track width for improved fitment and stance; they are machined from 6061-T6 billet aluminum and use M14x1.5 studs with 10.9-grade geomet bolts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese spacers are engineered to adapt wheels to Chevy and GMC trucks listed below, offering a durable, lightweight option when you need extra clearance or a wider stance. The parts are 2 inches thick with a 108 mm bore (non-hubcentric) and a 6x139.7 mm (6x5.5) lug pattern. Precision CNC machining and anodized surfaces help resist corrosion, while high-strength fasteners reduce the risk of failure under normal driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles are compatible with these EVIL ENERGY spacers?\u003c\/h3\u003e\n\u003cp\u003eCompatibility covers a broad range of Chevrolet and GMC full-size trucks and vans across many model years. Always double-check the year, make, and model against the fitment list and confirm wheel hub dimensions before purchase, since the bore is not hubcentric.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Silverado 1500 (1999–2022), Express 1500 (2003–2004), Express 2500 (1996–2006), K1500 (1988–1999), Suburban 1500 (2000–2014), Tahoe (2001–2022).\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra 1500 (1999–2021), Safari (2003–2005), Savana 1500 (2003–2014), Yukon (1992–2021), Yukon XL (2015–2021), Yukon XL 1500 (2000–2014).\u003c\/li\u003e\n  \u003cli\u003eWheel pattern: 6x139.7 mm (6x5.5); bore: 108 mm (not hubcentric); studs: M14x1.5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these spacers improve wheel fitment and driving clearance?\u003c\/h3\u003e\n\u003cp\u003eBy moving the wheel outward 2 inches, these spacers correct backspacing problems and create more clearance between suspension components and wheel\/tire assemblies. That extra offset can prevent rubbing on control arms, calipers, or inner fenders when running wider tires or aftermarket wheels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2\" spacer thickness (50 mm) increases track width and clearance.\u003c\/li\u003e\n  \u003cli\u003eCorrects wheel backspacing for wider tires or different wheel offsets.\u003c\/li\u003e\n  \u003cli\u003eHelps achieve a more aggressive stance and even tire tuck under fenders.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are used, and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThese spacers are milled from 6061-T6 aircraft-grade aluminum billet for a strong yet lightweight component. Fasteners are 10.9-grade geomet-coated bolts, selected for tensile strength and corrosion resistance; surfaces are anodized after CNC machining to maintain precision and durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 billet aluminum: high strength-to-weight ratio and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eCNC machining ensures tight tolerances for consistent fit and balance.\u003c\/li\u003e\n  \u003cli\u003e10.9-grade geomet bolts for high tensile strength and reduced risk of failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should these spacers be installed and maintained safely?\u003c\/h3\u003e\n\u003cp\u003eInstallation must be performed between the wheel hub bearing and the wheel; exact assembly depends on spacer and hub differences. Manual tightening is recommended to avoid over-torquing with power tools; recheck torque and have wheels professionally balanced after installation to minimize vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlace spacer between hub and wheel, then hand-tighten fasteners first.\u003c\/li\u003e\n  \u003cli\u003eAvoid power-tool final torque to reduce bolt stress—use calibrated torque wrench.\u003c\/li\u003e\n  \u003cli\u003eGet professional wheel balancing after installation and re-torque after short initial driving period.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These EVIL ENERGY 6x5.5 2\" wheel spacers are intended for owners of compatible Chevy and GMC trucks or vans who need additional wheel clearance, want to correct backspacing, or prefer a wider stance without changing wheel size. They suit DIY-savvy enthusiasts and professional installers who will follow torque, balancing, and safety recommendations; they are not hubcentric, so confirm hub fitment and consult a professional if unsure.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these spacers hubcentric?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The bore is 108 mm and the spacers are not hubcentric; check hub fitment and consider centering rings if needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Should I balance my wheels after installing them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Professional wheel balancing after installation is recommended to reduce vibration and improve driving smoothness.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585042055353,"sku":"B0D9Y2ZHML","price":267.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-spacer.jpg?v=1790464796"},{"product_id":"evil-energy-15-gallon-fuel-cell-gas-tank-black-aluminum-with-built-in-3-90ω-level-sender-and-anti-slosh-foam","title":"EVIL ENERGY 15 Gallon Fuel Cell Gas Tank — Black Aluminum with Built‑In 3–90Ω Level Sender and Anti‑Slosh Foam","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 15 Gallon Fuel Cell is a black aluminum gas tank with an integrated 3–90 ohm level sender and internal anti-slosh foam designed for safe fuel storage and accurate level monitoring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact 15 gallon fuel cell from EVIL ENERGY combines durable 1060‑H24 aluminum construction with a built‑in level sender and internal foam to reduce fuel movement. It’s sized to fit custom builds, racecars, boats, and utility trailers where a low-profile, secure fuel reservoir is required. The tank is finished in black and ships with a plastic cover and 10AN inlet\/outlet fittings for straightforward plumbing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the built-in level sender make fuel management easier?\u003c\/h3\u003e\n\u003cp\u003eThe packaged 3–90 ohm sender provides real‑time resistance readings compatible with many aftermarket gauges, so you can monitor remaining fuel without opening the tank. It simplifies installation and eliminates the need to buy a separate sender unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3–90 ohm resistance range for common analog gauges\u003c\/li\u003e\n  \u003cli\u003eIntegrated into the tank for plug‑and‑play wiring\u003c\/li\u003e\n  \u003cli\u003eRemoves need for additional sender mounting or modification\u003c\/li\u003e\n  \u003cli\u003eWorks with the tank’s internal geometry for accurate readings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this tank handle both gasoline and diesel safely?\u003c\/h3\u003e\n\u003cp\u003eYes—the EVIL ENERGY fuel cell is compatible with gasoline and diesel fuels. It is not rated for alcohol, methanol, ethanol blends, or water, so avoid those fluids to preserve seals and foam integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for gasoline and diesel use\u003c\/li\u003e\n  \u003cli\u003eNot compatible with alcohol, methanol, or ethanol fuels\u003c\/li\u003e\n  \u003cli\u003eInternal materials chosen to resist standard hydrocarbon fuels\u003c\/li\u003e\n  \u003cli\u003eCheck compatibility before using alternative fuels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and anti‑sloshing features are included?\u003c\/h3\u003e\n\u003cp\u003eTo limit fuel movement and improve pickup consistency, the tank contains internal anti‑slosh foam. The foam reduces slosh during acceleration, cornering, and rough conditions and also helps mitigate flashback risk when maintained properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreinstalled anti‑sloshing foam to stabilize fuel\u003c\/li\u003e\n  \u003cli\u003eFoam improves pickup reliability under dynamic loads\u003c\/li\u003e\n  \u003cli\u003eRecommended visual checks of foam for deterioration over time\u003c\/li\u003e\n  \u003cli\u003eAluminum body resists impact and enables secure mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the tank fit and connect in a vehicle or custom build?\u003c\/h3\u003e\n\u003cp\u003eThe tank’s compact footprint and mounting provisions simplify placement in tight spaces. It includes a mounting tab and 10AN fittings for standard performance plumbing, so most installations need minimal modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExternal dimensions: 19\" L × 17\" W × 10.03\" H for tight clearances\u003c\/li\u003e\n  \u003cli\u003eMounting tab diameter: 3.46\" to align with common brackets\u003c\/li\u003e\n  \u003cli\u003e10AN inlet\/outlet fittings for braided hose and performance plumbing\u003c\/li\u003e\n  \u003cli\u003eBlack finish and plastic cover for a neat appearance in visible areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This EVIL ENERGY 15 gallon fuel cell suits hobbyists, race teams, boaters, and fabricators who need a compact, durable fuel reservoir with built‑in level sensing and anti‑sloshing protection. Choose this tank if you require a low‑profile aluminum solution for gasoline or diesel systems and want integrated sender hardware for faster wiring and setup. Avoid if you plan to run alcohol‑based fuels or require tanks certified for specific commercial regulations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the EVIL ENERGY tank compatible with ethanol blends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This tank is not suitable for alcohols, methanol, water, or ethanol blends; use only gasoline or diesel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the tank’s external dimensions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The fuel cell measures 19\" L × 17\" W × 10.03\" H with a 3.46\" mounting tab diameter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585042219193,"sku":"B0B3ML8VGL","price":480.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-fuel-cell.jpg?v=1790464797"},{"product_id":"evil-energy-300-lph-external-inline-fuel-pump-kit-12v-high-flow-pump-with-10ft-6an-hose-aluminum-fittings","title":"EVIL ENERGY 300 LPH External Inline Fuel Pump Kit — 12V High-Flow Pump with 10ft 6AN Hose \u0026 Aluminum Fittings","description":"\u003cstrong\u003eEVIL ENERGY’s External Inline Fuel Pump Kit is a 300 LPH, 12V high-flow electric pump with a 10-foot 6AN fuel line and aluminum fittings designed to upgrade EFI fuel delivery for both gasoline and diesel vehicles.\u003c\/strong\u003e\n\n\u003cp\u003eIf your engine needs steadier, higher-volume fuel delivery than the stock pump provides, this inline kit supplies a compact, serviceable solution. The assembly pairs a high-flow electric pump rated up to 300 LPH with a CPE 6AN fuel hose and lightweight aluminum fittings, built to withstand typical automotive pressures and temperatures. It’s intended for 12V EFI systems where improved flow, consistent pressure, or a remote pump location is required.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pump improve fuel delivery under load?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY pump maintains higher flow rates at operating voltage, helping engines that demand more fuel during acceleration or heavy loads. Rated flow varies with pressure and voltage, so it covers a range of real-world conditions without abrupt drop-off.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e300 LPH at 13.5V and 43 PSI for peak supply needs.\u003c\/li\u003e\n  \u003cli\u003e255 LPH at 12V and 43 PSI for typical vehicle voltage.\u003c\/li\u003e\n  \u003cli\u003eStable 200 LPH at 12V and 75 PSI when more pressure is required.\u003c\/li\u003e\n  \u003cli\u003eCompatible with gasoline and diesel EFI systems for broad use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction ensure long-term reliability?\u003c\/h3\u003e\n\u003cp\u003eThe kit’s hose and fittings are chosen for durability in automotive environments. Reinforced CPE hose resists fuel and heat, while stainless wire and nylon braid add strength and abrasion resistance. Lightweight aluminum fittings reduce corrosion risk compared with plain steel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCPE rubber inner tube resists chemical breakdown from fuels.\u003c\/li\u003e\n  \u003cli\u003e304 stainless-steel wire reinforcement prevents collapse under vacuum.\u003c\/li\u003e\n  \u003cli\u003eNylon braided outer cover protects against chafing and heat.\u003c\/li\u003e\n  \u003cli\u003eAluminum fittings for corrosion resistance and lighter weight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install this inline pump for best performance?\u003c\/h3\u003e\n\u003cp\u003ePositioning and mounting impact function: the pump performs best when mounted below the fuel tank to allow gravity feed and reduce strain. The kit includes the fittings and guidance to make a secure installation; basic mechanical skill and attention to routing the hose away from heat sources are all that’s required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount below the tank for gravity-assisted supply and fewer cavitation issues.\u003c\/li\u003e\n  \u003cli\u003eUse the included aluminum fittings and clamps for leak-free connections.\u003c\/li\u003e\n  \u003cli\u003eRoute the 10-foot 6AN line away from headers and sharp edges.\u003c\/li\u003e\n  \u003cli\u003eFollow wiring recommendations for a fused 12V connection and relay if required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat operating conditions and limits should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe pump is designed for typical automotive temperature and pressure ranges but isn’t intended for continuous extreme-duty industrial use. It handles a wide operating temperature range and moderate EFI system pressures, giving a reliable balance of flow and durability for vehicle applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating temperature: -68°F to 194°F for broad climate tolerance.\u003c\/li\u003e\n  \u003cli\u003eRated operating pressure around 75 PSI for common EFI setups.\u003c\/li\u003e\n  \u003cli\u003e10-foot 6AN hose rated to 750 PSI for safety margin at fittings.\u003c\/li\u003e\n  \u003cli\u003eTested flow values across voltage and pressure to guide selection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This EVIL ENERGY kit suits DIY mechanics, performance enthusiasts, and anyone upgrading an EFI fuel system that needs improved flow or a relocated pump. It’s appropriate for gasoline and diesel 12V vehicles where a high-flow external solution, corrosion-resistant fittings, and a long, reinforced fuel line make installation easier and more dependable than jury-rigged alternatives.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pump compatible with gasoline and diesel EFI systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The EVIL ENERGY 300 LPH pump and 6AN hose are compatible with both gasoline and diesel 12V EFI systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Where should I mount the inline pump for best results?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mount below the fuel tank for gravity-fed supply and reduced cavitation; keep the hose away from heat and sharp edges.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585063813305,"sku":"B0FPWP8JXC","price":206.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-pump-front-view.jpg?v=1790465753"},{"product_id":"evil-energy-cold-air-intake-for-dodge-ram-1500-5-7l-2019-2024-black-aluminum-tube-heat-shield","title":"EVIL ENERGY Cold Air Intake for Dodge RAM 1500 5.7L (2019–2024) — Black, Aluminum Tube \u0026 Heat Shield","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY Cold Air Intake for Dodge RAM 1500 (2019–2024) is a complete intake kit with an aluminum tube, steel heat shield, and washable pre-filter that improves cold air delivery and protects the engine’s airflow.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis EVIL ENERGY kit is built for the 5.7L HEMI in Dodge RAM 1500 models from 2019 through 2024 and arrives with everything needed for a straightforward installation: precision-formed aluminum tubing, a steel heat shield, and a multi-layer synthetic non-woven filter with a washable pre-filter. The system is designed to move cooler air to the throttle while resisting road dust and debris, offering a balance of usable performance gains and long-term filter life without complex tuning.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cold air intake change throttle response and everyday driving?\u003c\/h3\u003e\n\u003cp\u003eExpect crisper throttle response and a more assertive engine note under acceleration while retaining smooth operation at cruising speeds. The larger, smoother aluminum tube reduces intake turbulence and helps the engine breathe more freely, translating to quicker response when you press the accelerator.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother-walled aluminum tube for steadier airflow\u003c\/li\u003e\n  \u003cli\u003eHeat shield limits engine bay heat to help maintain denser intake air\u003c\/li\u003e\n  \u003cli\u003eDeeper tone under acceleration with quiet cruising behavior\u003c\/li\u003e\n  \u003cli\u003eDesigned to complement stock fuel and ignition mapping—no required ECU changes in most cases\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the filter and pre-filter handle dusty or off-road use?\u003c\/h3\u003e\n\u003cp\u003eYes—this intake uses a multi-layer synthetic non-woven filter that delivers high filtration efficiency with washable, reusable media to cut running costs. The included pre-filter catches larger particles first, extending the service interval in dusty environments and preserving the primary filter’s performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-layer synthetic media with over 98% filtration efficiency\u003c\/li\u003e\n  \u003cli\u003eWashable and reusable to reduce replacement frequency and cost\u003c\/li\u003e\n  \u003cli\u003ePre-filter screens out larger debris during dusty or off-road driving\u003c\/li\u003e\n  \u003cli\u003eSimple cleaning routine restores original flow characteristics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation, and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be completed in about 40 minutes using basic hand tools, making it suitable for DIYers familiar with under-hood work. The kit includes precision-cut tubing and mounting hardware; follow manufacturer instructions for secure fitment and hose clamp torque.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated install time: ~40 minutes with common tools\u003c\/li\u003e\n  \u003cli\u003eIncludes heat shield, tubing, filter, and mounting hardware\u003c\/li\u003e\n  \u003cli\u003eNo special tuning usually required—verify sensor connections and clamps\u003c\/li\u003e\n  \u003cli\u003eClearances and fitment engineered for 2019–2024 Dodge RAM 1500 5.7L\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build features ensure durability?\u003c\/h3\u003e\n\u003cp\u003eThe intake uses a smooth-walled aluminum tube for corrosion resistance and consistent airflow, paired with a heavy-gauge steel heat shield that isolates hot engine air. Hardware and clamps are selected to withstand vibration and temperature cycles common to truck use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum intake tube with precision bends and smooth interior\u003c\/li\u003e\n  \u003cli\u003eSteel heat shield to reduce heat soak from the engine bay\u003c\/li\u003e\n  \u003cli\u003eDurable, reusable synthetic filter media with washable pre-filter\u003c\/li\u003e\n  \u003cli\u003eRobust clamps and brackets sized for truck duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who own a 2019–2024 Dodge RAM 1500 with the 5.7L engine and want a practical, bolt-on intake that improves throttle feel and engine sound while maintaining filtration and long-term serviceability. It’s a solid option for daily drivers who occasionally tow or carry loads, as well as owners who enjoy a simple, reversible modification without complex tuning. Always confirm fitment to your specific model year and follow all local regulations regarding aftermarket intake modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is tuning required after installing this EVIL ENERGY intake?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installations do not require ECU tuning. Verify sensor connections and consult a tuner only if you add other performance mods.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I clean the washable filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Clean the filter every 20,000–30,000 miles or sooner in dusty conditions; use mild detergent and air dry before reinstalling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585071612089,"sku":"B0G4432Q7F","price":394.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging.jpg?v=1790465982"},{"product_id":"evil-energy-cold-air-intake-for-1999-2007-chevy-gmc-cadillac-black-heat-shield-reusable-high-efficiency-filter","title":"EVIL ENERGY Cold Air Intake for 1999–2007 Chevy\/GMC\/Cadillac — Black, Heat Shield \u0026 Reusable High‑Efficiency Filter","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY Cold Air Intake is a complete bolt-on intake kit designed to replace the factory air system on 1999–2007 Chevy, GMC and select Cadillac trucks and SUVs, providing cooler incoming air, improved breathing, and a reusable high-efficiency filter.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis intake kit is built for direct-fit replacement on Silverado, Suburban, Tahoe, Avalanche, Sierra, Yukon and Escalade models listed for 1999–2007 (and select 2002–2006 Escalade EXT\/ESV). It includes a smooth-wall aluminum intake tube, a steel heat shield to isolate the air path from engine bay heat, and a washable multi-layer synthetic pre-filter and main filter. The system installs with basic hand tools in roughly 40 minutes and is engineered to balance performance, filtration, and everyday drivability.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit affect drivability and engine sound?\u003c\/h3\u003e\n\u003cp\u003eThe intake aims to improve airflow while keeping highway refinement. Drivers often notice a fuller, deeper intake note during acceleration while cruising remains quiet and controlled. The kit is tuned to avoid abrupt throttle behavior and maintain steady operation under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother throttle response through increased air volume.\u003c\/li\u003e\n  \u003cli\u003eDeeper, more aggressive induction sound on acceleration.\u003c\/li\u003e\n  \u003cli\u003eQuiet cruising with no harsh resonance at steady speeds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat filtration protection does the EVIL ENERGY system offer?\u003c\/h3\u003e\n\u003cp\u003eThis kit uses a multi-layer synthetic non-woven filter media and a removable pre-filter that traps larger debris. Filtration efficiency exceeds 98% for common airborne contaminants, and both elements are washable and reusable to lower long-term maintenance cost.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-layer synthetic filter with \u0026gt;98% particulate capture.\u003c\/li\u003e\n  \u003cli\u003ePre-filter for extra protection in dusty conditions.\u003c\/li\u003e\n  \u003cli\u003eWashable and reusable design for repeated service cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my truck or SUV and how hard is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit is engineered as a vehicle-specific replacement for the listed model years and platforms; confirm fitment for your exact VIN and engine before purchase. Installation requires basic hand tools and about 40 minutes for someone comfortable working in an engine bay.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit for many 1999–2007 Chevy Silverado\/Suburban\/Tahoe\/Avalanche models.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 1999–2007 GMC Yukon\/Sierra 1500\/1500HD\/2500HD and select 2002–2006 Cadillac Escalade EXT\/ESV.\u003c\/li\u003e\n  \u003cli\u003eHardware and instructions included for straightforward bolt-on installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the heat shield and tube design help performance?\u003c\/h3\u003e\n\u003cp\u003eThe included steel heat shield reduces intake air temperature by isolating the filter from engine bay heat, while the smooth-walled aluminum tube minimizes turbulence for more efficient airflow. Together they support consistent engine breathing across varied driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel heat shield blocks radiated engine heat from the intake path.\u003c\/li\u003e\n  \u003cli\u003eSmooth aluminum tube reduces internal turbulence for steady flow.\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists corrosion and daily wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This EVIL ENERGY kit suits owners of compatible Chevy, GMC and Cadillac trucks\/SUVs who want a durable, washable intake that balances improved airflow and a richer induction sound without sacrificing daily-road comfort. It’s ideal for DIY installers who prefer a direct-fit solution that uses stock mounting points and basic tools, and for drivers who spend time towing, hauling, or cruising where consistent air delivery matters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this intake washable and reusable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The multi-layer synthetic filter and pre-filter are washable and reusable for multiple maintenance cycles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typical installation takes about 40 minutes with basic hand tools and included hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585081376953,"sku":"B0G43Z12DR","price":373.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-assembly.jpg?v=1790466488"},{"product_id":"evil-energy-cold-air-intake-for-2001-2004-5-chevy-silverado-gmc-sierra-6-6l-lb7-duramax-black-aluminum-tube-heat-shield","title":"EVIL ENERGY Cold Air Intake for 2001–2004.5 Chevy Silverado\/GMC Sierra 6.6L LB7 Duramax — Black, Aluminum Tube \u0026 Heat Shield","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY Cold Air Intake for 2001–2004.5 Chevy Silverado\/GMC Sierra LB7 is a bolt-on intake kit with a washable high-efficiency pre-filter, aluminum intake tube, and steel heat shield designed to deliver cooler air and a deeper engine tone without extensive modification.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a 2001–2004.5 Chevy Silverado 2500HD\/3500 or a 2001–2004.5 GMC Sierra 2500HD\/3500 equipped with the 6.6L V8 LB7 Duramax, this intake is built to replace the restrictive factory breathing system with a more open, durable assembly. The kit includes a multi-layer synthetic non-woven filter and a pre-filter to trap larger debris, plus a precision-formed aluminum tube and a steel heat shield to help route cooler air to the turbo inlet. Installation follows existing mounting points so you can retain stock sensors and most factory plumbing while gaining better airflow and an enhanced exhaust note under load.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this intake improve airflow and filter protection?\u003c\/h3\u003e\n\n\u003cp\u003eThe EVIL ENERGY system uses a smooth-walled aluminum tube to reduce turbulence and pressure loss, while the multi-layer synthetic filter captures fine particulates. A removable pre-filter sits over the primary element to stop coarse dust and extend service intervals in dusty conditions. Together these components maintain high filtration efficiency without sacrificing flow.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSmooth aluminum tube minimizes airflow restriction and turbulence\u003c\/li\u003e\n  \u003cli\u003eMulti-layer synthetic non-woven filter provides over 98% filtration efficiency\u003c\/li\u003e\n  \u003cli\u003eWashable, reusable filter lowers long-term maintenance costs\u003c\/li\u003e\n  \u003cli\u003ePre-filter blocks larger particles to extend main filter life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I notice a change in sound or driving feel?\u003c\/h3\u003e\n\n\u003cp\u003eYes — under acceleration the intake produces a deeper, more assertive engine tone while preserving a quiet, comfortable character at cruising speeds. The freer-breathing design can make throttle response feel crisper and help the engine sustain power during heavy loads or uphill runs. The result is an improved sensory feedback without intrusive drone on the highway.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDeeper induction note during acceleration\u003c\/li\u003e\n  \u003cli\u003eMinimal added cabin noise at steady highway speeds\u003c\/li\u003e\n  \u003cli\u003ePerceptibly sharper throttle response under load\u003c\/li\u003e\n  \u003cli\u003eMaintains refinement for daily driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat about installation and compatibility — will it fit my truck?\u003c\/h3\u003e\n\n\u003cp\u003eEVIL ENERGY designed this intake to fit directly on 2001–2004.5 Silverado and Sierra 2500HD\/3500 trucks equipped with the LB7 6.6L Duramax engine, using factory mounting points and sensor provisions. Note that not every 2004 model uses the LB7 engine; verify your engine code before ordering. The kit comes with a steel heat shield, hardware, and the pre-filter to simplify installation and protect the assembly from engine bay heat.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2001–2004.5 Chevy\/GMC 2500HD and 3500 LB7 6.6L engines\u003c\/li\u003e\n  \u003cli\u003eUses existing sensor locations and mounting points for a bolt-on fit\u003c\/li\u003e\n  \u003cli\u003eIncludes steel heat shield and pre-filter for protection\u003c\/li\u003e\n  \u003cli\u003eVerify LB7 engine code for 2004 model-year vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the heat shield and tube design deliver colder air?\u003c\/h3\u003e\n\n\u003cp\u003eThe steel heat shield isolates the filter housing from underhood heat so intake air stays closer to ambient temperature. The aluminum tube’s smooth interior reduces hotspots and preserves velocity, helping denser air reach the turbocharger. Cooler, denser air supports more efficient combustion and consistent performance under varied conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSteel heat shield blocks engine bay heat from the filter\u003c\/li\u003e\n  \u003cli\u003eSmooth aluminum tube maintains air velocity and reduces turbulence\u003c\/li\u003e\n  \u003cli\u003eColder intake air helps maintain consistent combustion behavior\u003c\/li\u003e\n  \u003cli\u003eDesign intended for highway, towing, and daily driving demands\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This intake is aimed at Chevy and GMC owners with 2001–2004.5 2500HD or 3500 trucks powered by the LB7 6.6L Duramax who want a straightforward upgrade for better airflow, a washable high-efficiency filter, and a sportier induction sound without complex tuning or major fabrication. It’s well suited to drivers who tow, haul, or simply want a more responsive, durable intake setup while keeping maintenance simple.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2004 Silverado with a 6.6L engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only if your 2004 truck has the LB7 6.6L Duramax. Verify the engine code before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the air filter washable and reusable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the multi-layer synthetic filter and pre-filter are washable and reusable for long-term use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585087635641,"sku":"B0GGBBNSQV","price":352.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-assembly.jpg?v=1790466812"},{"product_id":"evil-energy-cold-air-intake-for-2011-2023-chrysler-300-dodge-challenger-charger-3-6l-black-heat-shield-washable-filter","title":"EVIL ENERGY Cold Air Intake for 2011–2023 Chrysler 300 \u0026 Dodge Challenger\/Charger 3.6L — Black, Heat Shield \u0026 Washable Filter","description":"\u003cstrong\u003eEVIL ENERGY’s bolt-on cold air intake upgrades your 3.6L Chrysler or Dodge for cooler, cleaner airflow and a fuller engine note without cutting or drilling.\u003c\/strong\u003e\n\n\u003cp\u003eThis complete intake kit is built for owners of 2011–2023 Chrysler 300\/300C and 2011–2023 Dodge Challenger\/Charger with the 3.6L engine who want better throttle response, longer filter life, and a deeper sound from the exhaust system while preserving factory fit. The package includes a precision-formed aluminum intake tube, a steel heat shield to separate intake air from engine heat, and a washable synthetic pre-filter and main filter—designed for straightforward installation with basic tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this intake affect everyday driving?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY system improves airflow dynamics to give more consistent engine performance across common driving conditions. You’ll notice crisper throttle response and steadier power delivery on highways, hills, and during light towing or loaded driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother mid-range acceleration and more immediate throttle reaction.\u003c\/li\u003e\n  \u003cli\u003eReduced intake air temperatures thanks to the included heat shield.\u003c\/li\u003e\n  \u003cli\u003eStable performance whether cruising or climbing grades.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the filtration system include and why does it matter?\u003c\/h3\u003e\n\u003cp\u003eThis kit uses a multi-layer synthetic non-woven main filter rated for over 98% filtration efficiency and a washable pre-filter for dusty conditions. The two-stage approach protects the engine and extends maintenance intervals without sacrificing airflow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMain washable synthetic filter — reusable and high-efficiency.\u003c\/li\u003e\n  \u003cli\u003ePre-filter captures large debris in harsh environments.\u003c\/li\u003e\n  \u003cli\u003eLower long-term filter cost versus disposable elements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and will my vehicle need modifications?\u003c\/h3\u003e\n\u003cp\u003eEVIL ENERGY designed this intake to install using common hand tools with no cutting or drilling required. A typical installation takes about 40 minutes for someone comfortable with basic mechanical tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt-on hardware and factory-style mounting points preserved.\u003c\/li\u003e\n  \u003cli\u003eCleared instructions and all brackets included for direct fit.\u003c\/li\u003e\n  \u003cli\u003eInstallation time: roughly 40 minutes for most users.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I hear a difference after fitting the intake?\u003c\/h3\u003e\n\u003cp\u003eYes—expect a deeper, more aggressive induction note under acceleration while maintaining a calm cabin at steady speeds. The system balances audible performance with comfort to deliver a sporty but refined driving experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNoticeable throatier intake sound during hard throttle.\u003c\/li\u003e\n  \u003cli\u003eMinimal additional noise while cruising at constant speeds.\u003c\/li\u003e\n  \u003cli\u003eEngine tone enhanced without compromising daily comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? EVIL ENERGY’s cold air intake is aimed at owners of 2011–2023 Chrysler 300\/300C and 2011–2023 Dodge Challenger\/Charger with the 3.6L engine who want a simple, reversible upgrade that improves airflow, filter longevity, and engine sound without permanent bodywork. It suits enthusiasts who prefer bolt-on performance upgrades, drivers in dusty regions who need durable filtration, and anyone wanting quicker throttle response while keeping stock engine management and emissions hardware intact. Be sure to confirm your exact model year and engine match before purchase to ensure fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this intake fit my 2015 Dodge Charger 3.6L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this EVIL ENERGY kit is compatible with 2011–2023 Dodge Charger 3.6L models. Verify your engine and model year before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace the filter often?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—the washable synthetic filter and pre-filter extend service intervals; clean as needed based on driving conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585088618681,"sku":"B0FD2WBDH5","price":438.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging_7a27942f-ba21-4a2c-9bde-baa122725df4.jpg?v=1790466852"},{"product_id":"evil-energy-adjustable-efi-fuel-pressure-regulator-kit-20-120-psi-black-aluminum-with-gauge-an6-an10-fittings","title":"EVIL ENERGY Adjustable EFI Fuel Pressure Regulator Kit 20–120 PSI — Black Aluminum with Gauge \u0026 AN6\/AN10 Fittings","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's adjustable EFI fuel pressure regulator kit gives you precise, tunable fuel pressure control from 20 to 120 PSI with an included gauge and AN6 fittings for universal EFI setups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete aluminum regulator assembly is built for EFI systems that need reliable pressure control during tuning, performance upgrades, or fuel system repairs. The kit ships with a pre-installed spring (20–75 PSI), an additional high-pressure spring (75–120 PSI), a visible pressure gauge, and a full set of AN6 and AN10 fittings plus a CPE fuel line to simplify installation. It supports gasoline, E85 and alcohol\/ethanol for the regulator itself, while the supplied nylon-braided CPE fuel hose is rated for gasoline only — note E85 requires compatible hose.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I set and adjust the fuel pressure?\u003c\/h3\u003e\n\u003cp\u003eAdjusting pressure is done via the top set screw and changing springs when you need to move above the pre-installed range. Start with the pre-installed spring for 20–75 PSI and switch to the included replacement spring to access 75–120 PSI; fine-tune using the allen key provided.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the top adjustment screw to increase or decrease pressure.\u003c\/li\u003e\n  \u003cli\u003eRead pressure on the included gauge while the engine or pump is running.\u003c\/li\u003e\n  \u003cli\u003eSwitch to the high-pressure spring to reach 75–120 PSI ranges.\u003c\/li\u003e\n  \u003cli\u003eApply thread sealant tape to NPT gauge port for a leak-free seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my EFI system and different fuels?\u003c\/h3\u003e\n\u003cp\u003eThe regulator body supports gasoline, E85 and alcohol\/ethanol, making it suitable for many EFI applications. However, the included CPE braided fuel hose is rated for gasoline only — replace hose with E85-compatible lines if running ethanol blends.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRegulator materials are compatible with gasoline and alcohol\/ethanol fuels.\u003c\/li\u003e\n  \u003cli\u003eIncluded CPE nylon-braided hose is gasoline-rated only.\u003c\/li\u003e\n  \u003cli\u003eMultiple AN fittings provide flexible plumbing options for most setups.\u003c\/li\u003e\n  \u003cli\u003eUniversal AN6\/AN10 ports allow installation on many aftermarket and OEM systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and fittings come in the kit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is curated to minimize extra shopping: it includes the regulator, gauge, springs, several AN fittings, a fuel hose, and small installation accessories so you can plumb most systems quickly. The assortment covers straight, 45°, and 90° AN6 fittings plus AN6-to-AN10 adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x fuel pressure regulator and 1x pressure gauge (NPT port).\u003c\/li\u003e\n  \u003cli\u003e1x replacement spring, 1x AN10 port plug, and an allen key.\u003c\/li\u003e\n  \u003cli\u003eMultiple AN6 fittings: straight, 45°, 90°, and ORB adapters.\u003c\/li\u003e\n  \u003cli\u003e1x AN6 CPE fuel line and hose separator clamp included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install it safely and avoid common problems?\u003c\/h3\u003e\n\u003cp\u003eInstallations require correct sealing and secure mounting; always use the included thread sealant tape on the NPT gauge port and torque fittings per spec. Professional installation is recommended if you’re not experienced with fuel system plumbing to prevent leaks and ensure safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply sealant tape to the NPT gauge port before tightening.\u003c\/li\u003e\n  \u003cli\u003eVerify hose compatibility if running E85 — replace CPE hose if needed.\u003c\/li\u003e\n  \u003cli\u003eMount regulator away from extreme heat and moving parts.\u003c\/li\u003e\n  \u003cli\u003eCheck all fittings for leaks under pressure before finalizing setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This EVIL ENERGY regulator kit suits enthusiasts, tuners, and mechanics who need a cost-effective, adjustable fuel pressure solution for aftermarket EFI projects or upgraded fuel systems. It’s ideal for vehicles that use gasoline or alcohol\/ethanol in the regulator itself, riders and drivers who require on-car pressure monitoring during tuning, and anyone wanting a comprehensive AN-fitting kit to minimize extra parts purchases. If you plan to run E85, plan to source compatible fuel hose before installation. For safe, reliable operation, consider professional installation when in doubt.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the included hose handle E85 fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The regulator accepts E85, but the supplied CPE braided hose is gasoline-rated only; use E85-compatible hose for ethanol blends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure ranges can I achieve with this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit covers 20–75 PSI with the pre-installed spring and 75–120 PSI after swapping in the replacement spring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585127317689,"sku":"B0FSWWM4SK","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-regulator-front-view_9b13b91e-a582-4d26-8d3f-885438984e36.jpg?v=1790468258"},{"product_id":"evil-energy-fuel-pressure-regulator-30-140-psi-adjustable-red-an10-return-with-gauge","title":"EVIL ENERGY Fuel Pressure Regulator 30–140 PSI Adjustable Red — AN10 Return with Gauge","description":"\u003cstrong\u003eEVIL ENERGY's adjustable EFI fuel pressure regulator is a billet 6061-T6 aluminum unit that lets you set and maintain precise fuel pressure between 30–140 PSI for gasoline and ethanol applications.\u003c\/strong\u003e\n\n\u003cp\u003eThis precision fuel pressure regulator is built for tuned and stock electronic fuel-injected engines that require a reliable, adjustable supply pressure. Machined from 6061-T6 aluminum and finished in red, the regulator includes a gauge, pre-installed and replacement springs to cover two pressure bands, and a full set of AN fittings so you can integrate it into most EFI systems. The unit accepts vacuum reference and an instrument port for diagnostics, and it uses ORB-style AN10 ports for feed and return plumbing.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I change and set the fuel pressure?\u003c\/h3\u003e\n\u003cp\u003eAdjusting pressure is done with the top set screw and by swapping the internal spring. The pre-installed spring provides a 30–80 PSI range; swap to the included replacement spring for an 80–140 PSI range. Always initial-set with a fuel pressure gauge and fine-tune under operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTurn clockwise to increase pressure, counterclockwise to decrease.\u003c\/li\u003e\n  \u003cli\u003eUse the supplied pressure gauge at the 1\/8\" NPT instrument port for readings.\u003c\/li\u003e\n  \u003cli\u003eSwap springs for the higher 80–140 PSI band if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fuels and engine systems is it compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe regulator works with gasoline, E85 and other alcohol-based fuels used in EFI systems but is not rated for diesel. Note that nylon braided hoses are not compatible with E85 — use fuel-rated lines approved for ethanol blends. This unit is intended for return-style EFI set-ups that can utilize an AN10 return port.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: gasoline, E85, alcohol\/ethanol blends.\u003c\/li\u003e\n  \u003cli\u003eNot compatible: diesel fuel and nylon braided E85 lines.\u003c\/li\u003e\n  \u003cli\u003eDesigned for return-style electronic fuel injection systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings and hardware are included for installation?\u003c\/h3\u003e\n\u003cp\u003eThe package ships with the regulator, a pressure gauge, an extra spring, an ORB plug and a selection of AN adapter fittings to match different feed sizes. Also included are an Allen key and sealant tape to help seal the NPT gauge port during installation. These accessories simplify plumbing the regulator to most aftermarket fuel rails or pump setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: pressure gauge, replacement spring, AN10 ORB plug.\u003c\/li\u003e\n  \u003cli\u003eAdapters: three AN10-to-AN6, three AN10-to-AN8, three AN10-to-AN10 fittings.\u003c\/li\u003e\n  \u003cli\u003eTools\/supplies: Allen key and thread sealant tape for gauge port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should this be installed and maintained for best results?\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is recommended to ensure correct plumbing and sealing, especially when working with pressurized fuel lines. Use thread sealant on the NPT gauge port, check all ORB fittings for proper torque, and test under idle and load to confirm stable pressure. Regular inspections for leaks and hose compatibility with ethanol fuels will extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse thread sealant tape on the NPT gauge port as supplied.\u003c\/li\u003e\n  \u003cli\u003eTorque AN\/ORB fittings to manufacturer specs; inspect for leaks.\u003c\/li\u003e\n  \u003cli\u003eVerify fuel-line materials are ethanol-compatible when using E85.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Tuners, performance enthusiasts, and shops upgrading or building EFI systems who need a durable, adjustable regulator capable of precise pressure control from 30 to 140 PSI. It’s a good match for custom fuel rails, high-flow pump systems, and vehicles running ethanol blends, provided installation follows best-practice plumbing and safety steps.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this regulator be used with E85?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it supports E85 and other alcohol-based fuels, but avoid nylon braided lines with E85.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure ranges are available out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Pre-installed spring covers 30–80 PSI; included replacement spring extends range to 80–140 PSI.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585131675833,"sku":"B0DM8VXRS5","price":167.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-regulator-front-view_4f777db1-ab2b-427e-81f2-f93f9652b055.jpg?v=1790468420"},{"product_id":"evil-energy-cold-air-intake-for-2009-2013-chevy-silverado-gmc-sierra-heat-shield-washable-pre-filter","title":"EVIL ENERGY Cold Air Intake for 2009–2013 Chevy Silverado \/ GMC Sierra — Heat Shield \u0026 Washable Pre-Filter","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY cold air intake for 2009–2013 Silverado\/Sierra\/Yukon\/Escalade improves airflow, delivers cooler air to the engine, and includes a heat shield plus a washable high-efficiency pre-filter.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you drive a 2009–2013 Chevy Silverado 1500, GMC Sierra 1500, Tahoe, Avalanche, Suburban, Yukon, or a Cadillac Escalade ESV\/EXT and want to sharpen throttle response without complicated tuning, this EVIL ENERGY kit is built to be a straightforward upgrade. It replaces the restrictive factory intake with a smooth-walled aluminum tube, a protective steel heat shield, and a reusable synthetic filter designed for high filtration and long service life. The system balances everyday refinement with a stronger, more confident engine note when accelerating.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this intake change everyday driving feel?\u003c\/h3\u003e\n\u003cp\u003eExpect crisper throttle response and more consistent power delivery across common driving situations like highway cruising, towing, and hill climbs. The design promotes steadier airflow and cooler inlet temperatures, which helps the engine breathe more freely without sacrificing drivability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother throttle tip-in and reduced intake restriction\u003c\/li\u003e\n  \u003cli\u003eMore stable performance under load and at steady speeds\u003c\/li\u003e\n  \u003cli\u003eSubtly deeper engine tone on acceleration while maintaining quiet cruising\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how is the kit built?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles everything needed for a complete cold air intake swap: a precision-formed aluminum intake tube, a steel heat shield to block under-hood heat, a multi-layer synthetic washable filter, and hardware for a bolt-in installation. Components are engineered for fit and durability in compatible GM trucks and SUVs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmooth-wall aluminum intake tube for reduced turbulence\u003c\/li\u003e\n  \u003cli\u003eSteel heat shield to limit radiant engine heat\u003c\/li\u003e\n  \u003cli\u003eMulti-layer synthetic non-woven filter with a removable pre-filter\u003c\/li\u003e\n  \u003cli\u003eMounting hardware and clamps for a straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eThis EVIL ENERGY intake is designed for owners with basic tools and mechanical familiarity. Most installers can complete the swap in about 40 minutes using commonly available hand tools, and no special tuning is typically required for stock engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated install time: ~40 minutes with basic hand tools\u003c\/li\u003e\n  \u003cli\u003eIncludes hardware and clamps; factory intake components are replaced\u003c\/li\u003e\n  \u003cli\u003eNo ECU reflash typically necessary for stock vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the filter maintained and how does it perform in dusty conditions?\u003c\/h3\u003e\n\u003cp\u003eThe high-efficiency synthetic filter is washable and reusable, rated to filter more than 98% of particulates in standard testing conditions. A removable pre-filter blocks larger debris to extend service intervals, making it suitable for both daily driving and dusty environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWashable multi-layer synthetic media for long-term use\u003c\/li\u003e\n  \u003cli\u003ePre-filter layer captures large particles and prolongs filter life\u003c\/li\u003e\n  \u003cli\u003eOver 98% filtration efficiency in typical particle ranges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The EVIL ENERGY cold air intake is aimed at owners of compatible 2009–2013 GM full-size trucks and SUVs who want a reliable, bolt-on airflow upgrade. It suits drivers seeking tangible improvements in throttle response and engine tone without complex tuning, and those who prefer a washable, high-efficiency filter for lower long-term maintenance costs. Before purchasing, verify vehicle fitment for your specific model and engine to ensure correct installation and performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2012 Chevy Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit is compatible with 2009–2013 Chevy Silverado 1500 models; confirm your engine and body style before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the intake require tuning after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No ECU tuning is typically required for stock engines; the kit is designed as a bolt-on airflow upgrade.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585137213625,"sku":"B0FD31KWZ2","price":373.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-view.jpg?v=1790468707"},{"product_id":"evil-energy-cold-air-intake-for-5-7l-hemi-black-heat-shield-washable-filter-charger-challenger-2011-2020-300-2012-2020","title":"EVIL ENERGY Cold Air Intake for 5.7L HEMI — Black, Heat Shield \u0026 Washable Filter (Charger\/Challenger 2011–2020, 300 2012–2020)","description":"\u003cstrong\u003eEVIL ENERGY's cold air intake kit replaces the restrictive factory breathing system with a smooth-aluminum intake, steel heat shield, and washable high-efficiency pre-filter to deliver cooler, cleaner air to 5.7L HEMI engines.\u003c\/strong\u003e\n\n\u003cp\u003eThis intake system is designed specifically for 5.7L V8 models: 2011–2020 Dodge Charger, 2012–2020 Dodge Challenger, and 2012–2020 Chrysler 300. The bolt-in kit includes a precision-formed aluminum tube, a heat-blocking steel shield, and a multi-layer synthetic non-woven filter that’s washable and reusable. Installation typically takes about 40 minutes using common hand tools, and no cutting or complex tuning is required.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this intake improve daily driving and highway use?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY system optimizes airflow so the engine breathes cooler, denser air under load and at steady cruising speeds. That helps maintain throttle response and engine smoothness whether you’re merging on the highway or climbing grade. The steel heat shield minimizes intake air temperature gains from the engine bay.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother throttle response in city and highway driving\u003c\/li\u003e\n  \u003cli\u003eConsistent air delivery during steady-speed cruising and uphill loads\u003c\/li\u003e\n  \u003cli\u003eHeat shield reduces intake air temperature from engine heat\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on fit preserves factory routing and sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat filtration does the kit provide, and how is it maintained?\u003c\/h3\u003e\n\u003cp\u003eThe system uses a multi-layer synthetic non-woven filter rated for over 98% filtration efficiency, plus an exterior pre-filter to trap larger debris in dusty conditions. The entire filter assembly is washable and reusable, extending service intervals and lowering long-term cost compared with disposable filters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-layer synthetic media for high particle capture\u003c\/li\u003e\n  \u003cli\u003eRemovable pre-filter to block larger grit and prolong life\u003c\/li\u003e\n  \u003cli\u003eWashable design enables repeated cleaning and reuse\u003c\/li\u003e\n  \u003cli\u003eReplacement or cleaning instructions included with the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my vehicle and how hard is installation?\u003c\/h3\u003e\n\u003cp\u003eCompatibility covers specific model years with the 5.7L engine: 2011–2020 Dodge Charger, 2012–2020 Challenger, and 2012–2020 Chrysler 300. The intake installs using factory mounting points and common tools, and most owners complete the job in roughly 40 minutes. Always double-check fitment for your VIN and vehicle options before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 5.7L V8 models within listed years — verify vehicle details first\u003c\/li\u003e\n  \u003cli\u003eBolt-on installation using factory brackets and fasteners\u003c\/li\u003e\n  \u003cli\u003eNo cutting, major modifications, or ECU reflash required\u003c\/li\u003e\n  \u003cli\u003eComes with hardware, clamp, and installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the intake affect engine sound and refinement?\u003c\/h3\u003e\n\u003cp\u003eExpect a more aggressive intake tone under acceleration while highway and idle refinement remain largely unchanged. The design balances a pronounced, sporty induction note during throttle events with quiet, comfortable cruising.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeeper, fuller intake sound under throttle\u003c\/li\u003e\n  \u003cli\u003eMaintains calm cabin noise at steady speeds\u003c\/li\u003e\n  \u003cli\u003eEngine note character improves without intrusive resonance\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet everyday driving comfort needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The EVIL ENERGY cold air intake is aimed at owners of compatible Dodge Charger, Challenger, and Chrysler 300 5.7L models who want a straightforward, serviceable upgrade that improves airflow, refreshes engine sound, and uses washable filtration to reduce ongoing costs. It’s ideal for enthusiasts seeking a clean installation that preserves factory routing and delivers reliable performance across daily driving, spirited runs, and highway use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is tuning required after installing this intake?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No ECU tuning is required; the kit is designed to bolt on and work with stock engine management.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I clean the washable filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Clean the filter every 12,000–20,000 miles or sooner in dusty conditions; check pre-filter regularly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585137344697,"sku":"B0G43YYQDT","price":392.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-shot-installed.jpg?v=1790468706"},{"product_id":"evil-energy-air-oil-separator-catch-can-for-2019-2026-chevy-silverado-gmc-sierra-5-3l-6-2l-3oz-reservoir-bolt-on-fit","title":"EVIL ENERGY Air Oil Separator \/ Catch Can for 2019-2026 Chevy Silverado \u0026 GMC Sierra 5.3L\/6.2L — 3oz Reservoir, Bolt-On Fit","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's 3oz air oil separator is a direct-fit oil catch can engineered to trap oil vapor from the PCV system for 2019–2026 Chevy Silverado 1500 and compatible GM trucks and SUVs, helping keep intakes and valves cleaner.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you drive a 2019–2026 Chevy Silverado 1500, GMC Sierra 1500, or 2021–2026 Tahoe\/Suburban\/Yukon family vehicle with the 5.3L or 6.2L engines, this air oil separator was built to match the engine layout and factory routing so installation is straightforward. The system uses a fine mesh aluminum filter to separate oil mist from crankcase ventilation gases and returns condensed oil to a 3oz collection reservoir. EVIL ENERGY supplies custom brackets, hoses, fittings and step-by-step instructions so you rarely need adapters or fabrication.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this catch can reduce intake contamination?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY separator intercepts oil vapor before it flows back into the intake tract, collecting condensed oil in the internal reservoir rather than letting it coat throttle bodies, intake valves, and combustion chambers. Cleaner intake components help maintain performance consistency and make routine maintenance easier.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFine mesh aluminum element captures microscopic oil droplets.\u003c\/li\u003e\n  \u003cli\u003e3oz reservoir holds condensed oil for periodic draining.\u003c\/li\u003e\n  \u003cli\u003eInstalled on the PCV side to prevent oil re-entry into the intake.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce carbon buildup on intake valves and sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation on my Chevy or GMC 5.3L\/6.2L?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed around the factory engine layout for the listed model years so most installs use the supplied hardware with minimal modification. EVIL ENERGY includes a custom bracket, hoses, fittings, and clear instructions to guide the process, and typical installs can be completed with basic hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle-specific bracket and mounting hardware included.\u003c\/li\u003e\n  \u003cli\u003ePre-cut hose lengths and factory-oriented fittings reduce trimming.\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions provided for step-by-step guidance.\u003c\/li\u003e\n  \u003cli\u003eNo need for extra adapters in most cases—bolt-on fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance does this oil separator require?\u003c\/h3\u003e\n\u003cp\u003eThe unit is serviceable: the mesh filter and reservoir need periodic inspection and cleaning to stay effective. EVIL ENERGY recommends checking the separator after roughly 500–1,000 miles and draining or cleaning as needed based on driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect after 500–1,000 miles initially to establish service interval.\u003c\/li\u003e\n  \u003cli\u003eDrain the 3oz collection cup when it approaches capacity.\u003c\/li\u003e\n  \u003cli\u003eRemove and rinse the mesh filter if heavy contamination appears.\u003c\/li\u003e\n  \u003cli\u003eReinstall components and verify hose clamps and fittings are secure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit affect engine performance or emissions?\u003c\/h3\u003e\n\u003cp\u003eThe catch can is intended to trap oil vapor from crankcase gases without altering factory PCV routing or introducing restrictions. It captures condensate while allowing ventilation to continue; it is not a device to modify emissions equipment and should be installed keeping all emissions controls intact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintains PCV flow while removing oil vapor.\u003c\/li\u003e\n  \u003cli\u003eNo throttling or restrictive valves—designed for free flow.\u003c\/li\u003e\n  \u003cli\u003eKept separate from emissions systems; follow local regulations.\u003c\/li\u003e\n  \u003cli\u003eHelps keep sensors and intake pathways cleaner, supporting consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? EVIL ENERGY’s air oil separator is aimed at owners of 2019–2026 Chevy Silverado 1500 and compatible GMC\/GM trucks and SUVs with 5.3L or 6.2L engines who want a vehicle-specific, easy-to-install solution to capture oil vapor before it re-enters the intake. If you do regular towing, long highway driving, or simply want to limit intake and valve deposits, this kit provides a compact, serviceable catch can with the mounting hardware and fittings matched to your engine.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this EVIL ENERGY catch can a direct fit for my 2020 Silverado 5.3L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This kit is built for 2019–2026 Silverado 1500 with 5.3L and 6.2L engines and includes vehicle-specific brackets and fittings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I service the oil separator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Inspect after 500–1,000 miles initially; drain or clean the mesh filter and reservoir when buildup is noticeable.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585137672377,"sku":"B0BVLWKGSP","price":167.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-unit-overview.jpg?v=1790468725"},{"product_id":"evil-energy-5x5-5-wheel-spacers-2-for-ram-1500-108mm-bore-6061-t6-aluminum-cnc-machined","title":"EVIL ENERGY 5x5.5 Wheel Spacers 2\" for Ram 1500 — 108mm Bore, 6061-T6 Aluminum, CNC-Machined","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 2\" 5x5.5 wheel spacers are precision-machined aluminum adapters designed to widen wheel stance and correct clearance for compatible Ram 1500 trucks using a 108mm bore and M14x1.5 studs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese spacers widen your wheel track by 2 inches (50 mm) and use a 5×5.5 (5×139.7 mm) bolt pattern to fit specified Ram 1500 applications. Built from 6061-T6 aircraft-grade billet aluminum and fastened with high-strength 10.9-grade geomet bolts, they are CNC-machined and anodized for dimensional accuracy and corrosion resistance. Note: the hub bore is 108 mm and these spacers are not hub-centric—proper installation and wheel balancing are important for best results.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my Ram 1500 and which years are covered?\u003c\/h3\u003e\n\n\u003cp\u003eThese spacers are manufactured to a 5×5.5 (5×139.7 mm) pattern and a 108 mm center bore, matching common Ram 1500 wheel specifications. They are compatible with Ram 1500 Classic models from 2019–2024 and Ram 1500 trucks from 2012–2018. Always verify your wheel bolt pattern, stud thread (M14×1.5), and hub measurements before purchase.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 5×5.5 (5×139.7 mm)\u003c\/li\u003e\n  \u003cli\u003eThickness: 2\" (50 mm)\u003c\/li\u003e\n  \u003cli\u003eCenter bore: 108 mm (not hub-centric)\u003c\/li\u003e\n  \u003cli\u003eStud thread: M14×1.5\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these spacers affect ride quality and clearance?\u003c\/h3\u003e\n\n\u003cp\u003eAdding 2 inches of offset increases track width, which can improve stability and provide clearance for larger tires or brake components. When installed and balanced correctly, the spacers are engineered to deliver smoother cornering and reduced rubbing without introducing harshness over rough surfaces. Because they are not hub-centric, precise fitment and wheel balancing become more important to prevent vibration.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCreates 2\" wider stance for improved clearance\u003c\/li\u003e\n  \u003cli\u003eReduces interference between wheel\/tire and suspension or calipers\u003c\/li\u003e\n  \u003cli\u003eDesigned for consistent driving feel when balanced properly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and manufacturing processes are used?\u003c\/h3\u003e\n\n\u003cp\u003eThese spacers use 6061-T6 aircraft-grade aluminum billet for a strong but light component. CNC machining produces tight tolerances and consistent concentricity, while anodized surfaces resist corrosion and wear. Fasteners are 10.9-grade geomet bolts chosen for tensile strength and reliability under load.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e6061-T6 billet aluminum body for strength-to-weight balance\u003c\/li\u003e\n  \u003cli\u003eCNC-machined for precision fit and concentricity\u003c\/li\u003e\n  \u003cli\u003eAnodized finish for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003e10.9-grade geomet bolts for high-strength fastening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and safety?\u003c\/h3\u003e\n\n\u003cp\u003eThese spacers mount between the wheel hub bearing and the wheel back; installation should follow manufacturer torque specs and careful assembly. Manual tightening is recommended to avoid over-torquing from power tools, which can stress bolts. Because spacers alter wheel balance and hub relationship, professional balancing after installation is advisable to minimize vibration and ensure safe operation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInstall between hub bearing and wheel; check orientation\u003c\/li\u003e\n  \u003cli\u003eUse hand tools to torque bolts to spec; avoid power-tool over-tightening\u003c\/li\u003e\n  \u003cli\u003eHave wheels professionally balanced after installation\u003c\/li\u003e\n  \u003cli\u003eConfirm thread pitch M14×1.5 and center bore fit before fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These EVIL ENERGY 2\" 5×5.5 spacers are meant for Ram 1500 owners (2012–2018 and 2019–2024 Classic) who need extra tire or brake clearance, want a wider stance for appearance or handling, and are comfortable completing a careful, torque-sensitive install or hiring a qualified installer. They suit owners seeking a durable, CNC-machined aluminum spacer solution with high-strength fasteners—provided they confirm fitment and complete wheel balancing after fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these spacers hub-centric?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, these spacers have a 108mm bore and are not hub-centric; wheel balancing is recommended after installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What vehicles do these spacers fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Ram 1500 Classic (2019–2024) and Ram 1500 (2012–2018) with 5×5.5 bolt pattern and M14×1.5 studs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585146028217,"sku":"B0D9JP4BD8","price":267.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-mounted-spacer.jpg?v=1790468925"},{"product_id":"evil-energy-cold-air-intake-ford-f-150-expedition-navigator-2015-2025-black-heat-shield-washable-filter","title":"EVIL ENERGY Cold Air Intake — Ford F-150\/Expedition\/Navigator 2015–2025, Black, Heat Shield \u0026 Washable Filter","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's cold air intake is a complete bolt-on kit that routes cooler outside air to your 3.5L\/2.7L EcoBoost engine using a smooth-aluminum tube, steel heat shield, and washable pre-filter for improved airflow and a richer engine note.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you drive a compatible Ford F-150, F-150 Raptor, Expedition, or Lincoln Navigator (model years listed below) and want a straightforward upgrade that enhances throttle response and sound without complex tuning, this kit is built for quick installation and durable daily use. It pairs an engineered intake tube with a multi-layer synthetic media filter and a steel shield to reduce intake air temperatures and help maintain consistent performance across varied driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines will this intake fit?\u003c\/h3\u003e\n\u003cp\u003eThis EVIL ENERGY cold air intake is made for Ford trucks and SUVs equipped with 2.7L or 3.5L EcoBoost engines across the specified model years. It covers many F-150 trims, Raptor variants, full-size Expeditions, and Lincoln Navigator models noted in the product listing. Always verify your vehicle year and engine code before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 2015–2025 Ford F-150: 2.7L and 3.5L EcoBoost engines\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2017–2025 F-150 Raptor 3.5L EcoBoost\u003c\/li\u003e\n  \u003cli\u003eSupports 2018–2025 Ford Expedition and 2018 Lincoln Navigator 3.5L\u003c\/li\u003e\n  \u003cli\u003eInstallation typically completes in about 40 minutes using basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this intake help everyday driving and towing?\u003c\/h3\u003e\n\u003cp\u003eThe system focuses on stable airflow and slightly cooler intake temperatures to help the engine breathe more freely under load. That manifests as crisper throttle response, steadier highway cruising, and more predictable behavior while climbing hills or hauling. It’s designed to be a practical upgrade rather than an extreme race-only component.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother airflow for improved throttle feel in daily driving\u003c\/li\u003e\n  \u003cli\u003eHeat shield reduces engine bay heat influence on intake air\u003c\/li\u003e\n  \u003cli\u003eSupports consistent performance when towing or climbing grades\u003c\/li\u003e\n  \u003cli\u003eMaintains quiet cruising while adding a fuller acceleration tone\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat filter technology and maintenance does it use?\u003c\/h3\u003e\n\u003cp\u003eThe intake uses a multi-layer synthetic, non-woven filter media rated for over 98% filtration efficiency, engineered to balance airflow and particle capture. A washable and reusable design keeps long-term ownership costs low, and the included pre-filter catches larger debris to prolong service intervals in dusty conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-layer synthetic media \u0026gt;98% filtration efficiency\u003c\/li\u003e\n  \u003cli\u003eWashable, reusable filter element — service instead of replace\u003c\/li\u003e\n  \u003cli\u003ePre-filter layer for harsher or dusty environments\u003c\/li\u003e\n  \u003cli\u003eSimple inspection and cleaning schedule for long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installation require special tools or tuning?\u003c\/h3\u003e\n\u003cp\u003eNo exotic tools or ECU tuning are typically required for installation; the kit is engineered for bolt-on fitment using common hand tools. Fasteners, clamps, and a pre-shaped tube and shield are included to streamline the process. If you plan on adding more performance modifications, a professional tune may unlock additional gains, but the intake itself functions safely on stock calibrations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for straightforward 40-minute installation\u003c\/li\u003e\n  \u003cli\u003eIncludes heat shield, tube, clamps, and pre-filter for complete assembly\u003c\/li\u003e\n  \u003cli\u003eNo mandatory ECU remap for standard operation\u003c\/li\u003e\n  \u003cli\u003eOptional tuning only if combining with other power upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The EVIL ENERGY cold air intake is aimed at truck and SUV owners who want a reliable, user-serviceable improvement in airflow and engine sound without converting their vehicle into a track-only machine. It's well suited for daily drivers, light tow operators, and enthusiasts seeking a satisfying balance of performance, durability, and ease of installation on compatible Ford 2.7L and 3.5L EcoBoost platforms.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to retune my Ford after installing this intake?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No retune is required for normal use; the intake works with stock ECU settings. If you add additional performance parts, a professional tune can optimize results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I clean the washable filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Inspect every 10,000–15,000 miles or sooner in dusty areas. Clean and re-oil as needed when dirt buildup is visible.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585154121913,"sku":"B0G442W1FB","price":363.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging-view_c5896812-11f5-4748-8652-93f074ea9248.jpg?v=1790469039"},{"product_id":"evil-energy-efi-fuel-system-kit-300lph-inline-pump-10-micron-filter-adjustable-20-120-psi-regulator-universal","title":"EVIL ENERGY EFI Fuel System Kit — 300LPH Inline Pump, 10‑Micron Filter, Adjustable 20–120 PSI Regulator (Universal)","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY’s kit is a complete universal EFI fuel system package that combines a 300LPH inline pump, a 10-micron multi-layer filter, and an adjustable 20–120 PSI fuel pressure regulator for precise fuel delivery and engine protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit supplies the main components needed to upgrade or replace a gasoline EFI feed: a high-flow external pump, a fine 10-micron inline filter that traps particulates, an adjustable regulator with gauge, replacement spring, fittings and mounting hardware. It’s designed for widespread compatibility across most petrol-powered vehicles and motorsport applications, removing the need to buy many matching parts separately.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit improve fuel delivery for performance or replacement jobs?\u003c\/h3\u003e\n\n\u003cp\u003eThe 300LPH external pump offers steady high-flow capability suitable for most high-output street and race engines. Matched to an adjustable regulator, it helps stabilize metered fuel pressure under varying engine loads so injectors perform consistently.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e300 liters-per-hour pump supports higher demand engines.\u003c\/li\u003e\n  \u003cli\u003eAdjustable regulator (20–120 PSI) lets you tune system pressure precisely.\u003c\/li\u003e\n  \u003cli\u003eGauge and spare spring included for quick verification and higher-pressure setups.\u003c\/li\u003e\n  \u003cli\u003eComplete fittings and brackets to simplify installation and reduce compatibility headaches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does the 10-micron inline filter offer?\u003c\/h3\u003e\n\n\u003cp\u003eThe EVIL ENERGY 10-micron filter uses a layered media that captures fine contaminants before they reach the injectors and pump internals. This level of filtration reduces abrasive wear and helps maintain consistent spray patterns from injectors over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMulti-layer filtration traps dust and particles down to 10 microns.\u003c\/li\u003e\n  \u003cli\u003eInline placement protects both pump and downstream fuel system components.\u003c\/li\u003e\n  \u003cli\u003eServiceable design so the filter can be replaced during routine maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what fittings are included?\u003c\/h3\u003e\n\n\u003cp\u003eEVIL ENERGY bundles a wide assortment of fittings, ORB plugs, adapters and mounting brackets so the kit fits many vehicle fuel systems without extra purchases. Basic mechanical skills and common tools are all that’s needed to install the pump, regulator and filter in most applications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes 6AN and 10AN fittings, ORB adapters, M18 and M12 adapters, and mounting brackets.\u003c\/li\u003e\n  \u003cli\u003ePressure gauge and spare regulator spring included for setup verification and range extension.\u003c\/li\u003e\n  \u003cli\u003eSealing tape recommended for regulator gauge port; follow torque and hose routing best practices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any fuels or conditions to avoid with this system?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit is engineered for gasoline applications and is not suitable for diesel or highly alcohol-blended fuels such as E85. Using incompatible fuels can damage seals, pump internals, and the filter media, and is therefore not recommended.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNot compatible with diesel fuel or strong alcohol fuels (E85, methanol).\u003c\/li\u003e\n  \u003cli\u003eUse sealing tape at the regulator gauge interface and follow installation notes carefully.\u003c\/li\u003e\n  \u003cli\u003eReplace regulator spring to increase achievable pressure range when needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The EVIL ENERGY fuel system kit fits owners upgrading a gasoline EFI system, tuners preparing a high-flow street or race setup, and mechanics who want a ready-made replacement pack without sourcing multiple components. If you need a robust 300LPH pump, fine inline filtration, and an adjustable, gauge-equipped regulator with the necessary fittings in one box, this kit provides a practical, vehicle-compatible solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this kit with diesel or E85?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit is intended for gasoline EFI only and is not recommended for diesel or high-alcohol fuels like E85.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include fittings for most cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It ships with multiple 6AN\/10AN, ORB, M18 and M12 adapters plus brackets to fit a wide range of vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585425834169,"sku":"B0G1Y8W2TV","price":367.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging_07e626d5-b890-47c8-99f7-ac6f5011e0af.jpg?v=1790469932"},{"product_id":"evil-energy-16-row-oil-cooler-kit-10an-16-row-aluminum-compact-12-91-5-71-for-engines-transmissions","title":"EVIL ENERGY 16-Row Oil Cooler Kit 10AN — 16-row aluminum, compact 12.91\"×5.71\" for engines\/transmissions","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY’s 16-row 10AN oil cooler kit is a compact, universal aluminum radiator system that lowers engine and transmission oil temperatures while fitting most vehicles with a 330mm bracket.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit pairs a stacked-plate 16-row aluminum cooler with high-pressure 10AN fittings and two nylon-braid hoses, creating a durable oil cooling solution for engines, transmissions, or differentials. The assembly was engineered for high flow and efficient heat transfer: the cooler measures 12.91\" × 5.71\" × 1.97\" and holds 0.39 liters of oil. The included hoses are rated to 500 PSI and wide temperature extremes, and the cooler itself is pressure-tested for reliability.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil cooler reduce operating temperatures?\u003c\/h3\u003e\n\u003cp\u003eThe 16-row stacked-plate design increases surface area and channeling to move oil past more cooling surfaces per pass, improving heat dissipation without excessive size. Aluminum construction speeds heat transfer, and the compact profile allows placement in well-ventilated mounting points where airflow is highest.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16 stacked cooling rows for greater surface area and efficiency\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy core for fast heat conduction\u003c\/li\u003e\n  \u003cli\u003eLow oil capacity (0.39 L) minimizes added fluid while still providing cooling\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions fit behind bumpers or near radiators with adequate clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my vehicle and how difficult is installation?\u003c\/h3\u003e\n\u003cp\u003eThe cooler is designed as a universal product intended to work with most vehicles that accept a 330mm bracket; however, clearance and mounting points vary. Measure the available area and confirm it exceeds 12.91\" × 5.71\" × 1.97\" before ordering. Some vehicles may require extra fittings or minor trimming of a bumper or shroud to create proper airflow and clearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm installation area larger than 12.91\" × 5.71\" × 1.97\"\u003c\/li\u003e\n  \u003cli\u003eIncludes basic installation instructions for guidance\u003c\/li\u003e\n  \u003cli\u003eMay need additional fittings or adapters depending on factory lines\u003c\/li\u003e\n  \u003cli\u003eBest mounted where airflow is unobstructed for optimal cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and pressure specifications?\u003c\/h3\u003e\n\u003cp\u003eThe cooler and hoses are built for demanding environments: the aluminum cooler is pressure-tested to 116 PSI and has a burst pressure of 232 PSI. The supplied nylon-braid hoses feature a CPE inner layer and are rated for 500 PSI working pressure, with operating temperatures from -40°F to 257°F, making them suitable for most road and track conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCooler test pressure: 116 PSI, burst: 232 PSI\u003c\/li\u003e\n  \u003cli\u003eHose working pressure: 500 PSI\u003c\/li\u003e\n  \u003cli\u003eHose temperature range: -40°F to 257°F\u003c\/li\u003e\n  \u003cli\u003eDurable aluminum and reinforced braid construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I position the cooler for best results?\u003c\/h3\u003e\n\u003cp\u003eInstall the cooler where it receives steady airflow, such as behind a front bumper opening or in front of the radiator, but only after confirming clearance. Avoid enclosed spaces with poor ventilation. Proper placement maximizes heat exchange without risking contact with hot engine components or debris.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrefer front-facing, well-ventilated mounting locations\u003c\/li\u003e\n  \u003cli\u003eVerify no interference with factory cooling or steering components\u003c\/li\u003e\n  \u003cli\u003eKeep hoses routed away from sharp edges and extreme heat sources\u003c\/li\u003e\n  \u003cli\u003eCheck fittings and torque after initial test drive for leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The EVIL ENERGY 16 Row 10AN Oil Cooler Kit suits enthusiasts and technicians who need compact, high-efficiency oil cooling for engines, transmissions, or differentials on street, track, or towing vehicles. It’s a practical upgrade when factory cooling is marginal or when consistent oil temperature control is desired. Buyers should be comfortable measuring fitment, making minor modifications if necessary, and following the included instructions to ensure proper installation and airflow.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include fittings for every vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes standard 10AN fittings, but some vehicles may need additional adapters or fittings not supplied.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperatures and pressures can the hoses handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Hoses are rated to 500 PSI and -40°F to 257°F for broad, high-pressure temperature use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585446903993,"sku":"B07W3LQ72V","price":246.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-oil-cooler_1f903017-3f29-4ab8-b8bf-f7de61ff4461.jpg?v=1790470469"},{"product_id":"evil-energy-5x5-wheel-spacers-1-5-hub-centric-71-5mm-bore-6061-t6-cnc-machined","title":"EVIL ENERGY 5x5 Wheel Spacers 1.5\" Hub-Centric 71.5mm Bore — 6061-T6 CNC Machined","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 1.5-inch 5x5 wheel spacers are machined, hub-centric aluminum adapters that increase track width and clearances for compatible Jeep models while using 1\/2x20 studs and a 71.5mm hub bore.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese EVIL ENERGY spacers are designed to sit between the wheel hub and the wheel, engineered from 6061-T6 billet aluminum and finished with an anodized surface for corrosion resistance. They use high-strength 10.9-grade geomet bolts and precise CNC machining to deliver consistent fitment and stability. Intended for specific Jeep model years, they help correct backspacing, provide additional clearance for larger tires or aftermarket brakes, and widen stance for improved aesthetics.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Jeep models will these spacers fit?\u003c\/h3\u003e\n\u003cp\u003eThese spacers are made for Jeep vehicles that share a 5x127mm (5x5) lug pattern and a 71.5mm hub bore. Verify your year, make and model before buying to ensure proper hubcentric alignment and safe fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Jeep Commander (2006–2010)\u003c\/li\u003e\n  \u003cli\u003eCompatible with Grand Cherokee (1999–2010)\u003c\/li\u003e\n  \u003cli\u003eCompatible with Wrangler models (2007–2017 and 2018 Wrangler JK)\u003c\/li\u003e\n  \u003cli\u003eConfirm vehicle years and factory specifications against the spacer dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these spacers built and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eEVIL ENERGY spacers are manufactured from aircraft-grade 6061-T6 aluminum billet for strength-to-weight balance, then CNC machined for precise tolerances. They arrive with high-tensile 10.9-grade geomet bolts suited to the 1\/2x20 stud pattern to ensure secure attachment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 billet aluminum construction for durability\u003c\/li\u003e\n  \u003cli\u003ePrecise CNC machining and anodized finish for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003e10.9-grade geomet bolts included for secure fastening\u003c\/li\u003e\n  \u003cli\u003eHub-centric 71.5mm bore to center on factory hubs reliably\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat driving and installation considerations should I know?\u003c\/h3\u003e\n\u003cp\u003eWhen installed correctly, the 1.5\" spacer increases clearance without introducing significant harshness on rough roads. However, installation technique matters: hand torque to final specs is recommended to avoid over-torquing bolts with power tools. After installation, rebalancing the wheels reduces the chance of vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall between wheel hub bearing and wheel; follow assembly orientation\u003c\/li\u003e\n  \u003cli\u003eManual final torquing advised to prevent bolt damage or cracking\u003c\/li\u003e\n  \u003cli\u003eProfessional wheel balancing recommended post-install to minimize vibration\u003c\/li\u003e\n  \u003cli\u003eMay alter wheel balance and vehicle handling characteristics slightly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these spacers affect my vehicle warranty or safety?\u003c\/h3\u003e\n\u003cp\u003eWheel spacers are aftermarket components and can change load paths and wheel alignment relationships. They should be installed and inspected by qualified technicians, and owners should consult their vehicle warranty and local regulations before modifying suspension or wheel setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMay influence warranty coverage depending on manufacturer terms\u003c\/li\u003e\n  \u003cli\u003eRequires professional inspection if doubts about fit or balance arise\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs and safety checks after initial installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These EVIL ENERGY 1.5\" hub-centric spacers are aimed at Jeep owners seeking a wider stance, improved clearance for larger tires or aftermarket brake components, and a durable, precise spacer solution. Ideal buyers are mechanically inclined DIYers or professional installers who will verify vehicle compatibility, follow recommended torque procedures, and balance wheels after fitting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these spacers hub-centric for my Jeep?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are hub-centric with a 71.5mm bore designed to center on compatible Jeep hubs—confirm your hub bore before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to rebalance wheels after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Professional wheel balancing after installing spacers is recommended to reduce potential vibration and ensure smooth driving.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585447919801,"sku":"B0D9Y3LJD5","price":267.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-face-spacer.jpg?v=1790470532"},{"product_id":"evil-energy-19-row-oil-cooler-kit-universal-10an-aluminum-cooler-with-braided-hoses","title":"EVIL ENERGY 19-Row Oil Cooler Kit — Universal 10AN Aluminum Cooler with Braided Hoses","description":"\u003cstrong\u003eEVIL ENERGY 19-row oil cooler kit is a universal aluminum stacked-plate engine oil radiator with 10AN fittings designed to reduce oil temperature for engines, transmissions, and differentials.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact cooler combines a 19-row stacked-plate core with durable aluminum construction and braided hoses to provide increased heat transfer and reliable fluid routing in a wide variety of vehicles. The assembly is engineered for workshops and DIY installers who need a straightforward, space-efficient oil cooling solution that mounts where airflow is available.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oil cooler lower operating temperature?\u003c\/h3\u003e\n\u003cp\u003eThe 19-row stacked-plate core creates a large surface area for oil-to-air heat exchange, so hot oil sheds heat more quickly as air flows across the cooler. Thick aluminum plates transfer heat efficiently while the 10AN fittings and braided hoses keep flow steady under pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e19 stacked cooling rows for expanded heat dissipation\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy body for fast thermal conduction\u003c\/li\u003e\n  \u003cli\u003e10AN inlet\/outlet for steady high-volume flow\u003c\/li\u003e\n  \u003cli\u003eDesigned oil capacity ~0.45 L to add coolant volume\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it physically fit my vehicle and where should I mount it?\u003c\/h3\u003e\n\u003cp\u003eThe cooler measures 12.91\" × 6.67\" × 1.97\" and is intended for universal mounting where there is clear airflow, such as ahead of the radiator or behind the bumper. Confirm the planned installation area accommodates these dimensions and allows room for hoses and fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck clearance against the provided 12.91\"×6.67\"×1.97\" footprint\u003c\/li\u003e\n  \u003cli\u003eCompatible with common 330mm cooler mounting brackets\u003c\/li\u003e\n  \u003cli\u003eFront bumper or radiator support recommended for best airflow\u003c\/li\u003e\n  \u003cli\u003eSome vehicles may need additional fittings or bracket adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the hose and pressure specifications I should know?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes two nylon-braided hoses with a CPE inner layer rated to perform across a wide temperature range and handle elevated operating pressures. Hoses are supplied in two convenient lengths so you can route fluid without excessive joins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne hose 3.3 ft and one hose 3.9 ft for flexible routing\u003c\/li\u003e\n  \u003cli\u003eWorking pressure up to 500 PSI for dependable sealed flow\u003c\/li\u003e\n  \u003cli\u003eOperational temperatures from -40°F to 257°F for diverse climates\u003c\/li\u003e\n  \u003cli\u003e10AN fittings compatible with common performance plumbing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the cooler under pressure?\u003c\/h3\u003e\n\u003cp\u003eThe aluminum cooler has been pressure-tested with clear safety margins: a test pressure of 116 PSI and a burst pressure of 232 PSI documented to demonstrate structural integrity. Its construction and braided hoses are chosen to resist typical under-hood stresses and temperature cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy construction for corrosion resistance and strength\u003c\/li\u003e\n  \u003cli\u003eTest pressure: 116 PSI, burst pressure: 232 PSI for reliability\u003c\/li\u003e\n  \u003cli\u003e0.45 L oil capacity adds modest fluid volume to the system\u003c\/li\u003e\n  \u003cli\u003eIncludes installation instructions for proper sealing and routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This EVIL ENERGY 19-row oil cooler kit suits enthusiasts, professional mechanics, and vehicle owners who need an economical, space-conscious cooler for engines, transmissions, or differentials. It’s best for setups with available front airflow or intercooler space and for anyone comfortable verifying fitment measurements and completing a basic fluid-routing installation. If your vehicle requires specialized fittings or extra brackets, those items should be sourced before installation to ensure a smooth fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cooler compatible with my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Measure your available mounting area against 12.91\"×6.67\"×1.97\" and confirm clearance; some vehicles may need adapter fittings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use it for transmission or differential cooling?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The stacked-plate design works for engines, transmissions, and rear differentials when properly plumbed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585449853113,"sku":"B0DG97BLHM","price":275.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view_86332ffd-bf68-4391-a6d3-9196b73fb3f0.jpg?v=1790470634"},{"product_id":"evil-energy-5-8-heater-hose-50ft-epdm-coolant-radiator-hose-sae-20r3-100-psi-working","title":"EVIL ENERGY 5\/8\" Heater Hose 50FT EPDM Coolant Radiator Hose — SAE 20R3, 100 psi Working","description":"\u003cstrong\u003eEVIL ENERGY 5\/8\" Heater Hose is a 50-foot EPDM coolant hose engineered for engine cooling, heater, and radiator connections, meeting SAE 20R3 Class D-2 performance at a working pressure of 100 psi.\u003c\/strong\u003e\n\n\u003cp\u003eThis heavy-duty heater hose delivers a long, flexible run of EPDM rubber tubing specifically designed for coolant, antifreeze, and hot water circulation in automotive and small engine systems. Built to withstand wide temperatures and resist common automotive fluids, it provides a reliable replacement or custom-length line for heater cores, radiator overflow connections, and other cooling plumbing tasks.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this hose handle engine temperatures and seasonal extremes?\u003c\/h3\u003e\n\u003cp\u003eThe hose is formulated from EPDM rubber, a material chosen for heat, ozone, and weather resistance. It operates across a broad range so it stays flexible in cold starts and resists deformation at high under-hood temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature range: -40°F to 257°F (-40°C to 125°C)\u003c\/li\u003e\n  \u003cli\u003eEPDM construction for thermal and ozone resistance\u003c\/li\u003e\n  \u003cli\u003eMaintains flexibility at low temperatures and structural integrity at high heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this hose strong enough for typical cooling system pressures?\u003c\/h3\u003e\n\u003cp\u003eYes — the hose is rated with a conservative working pressure and a significantly higher burst pressure for safety. It was manufactured to meet the SAE 20R3 standard wall requirements, so it’s suitable for most automotive and light-truck cooling circuits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 100 psi for continuous operation\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 300 psi for pressure spike protection\u003c\/li\u003e\n  \u003cli\u003eSAE 20R3 (Class D-2) compliance for wall construction and performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes, tolerances, and installation considerations should I know?\u003c\/h3\u003e\n\u003cp\u003eThis product provides a clear, measurable profile so you can plan fittings and clamps accurately. The inside and outside dimensions include small manufacturing tolerances; allow for these when matching hose to barbs, elbows, and reservoir fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 5\/8\" (16 mm) with ±0.5 mm tolerance\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 0.94\" (24 mm) with ±0.6 mm tolerance\u003c\/li\u003e\n  \u003cli\u003eLength: 50 feet of continuous hose for long runs or multiple shorter cuts\u003c\/li\u003e\n  \u003cli\u003eMinimum bending radius: 128 mm — avoid sharp bends and kinks during routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and applications are compatible with this tubing?\u003c\/h3\u003e\n\u003cp\u003eThe EPDM compound is compatible with a range of cooling-related media common to vehicles and heating systems. It’s intended for fluid transport in heater cores, radiator connections, overflow lines, and similar low-pressure coolant tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible media: coolant, water, and standard automotive antifreeze mixtures\u003c\/li\u003e\n  \u003cli\u003eSuitable uses: hot water heaters, engine cooling circuits, radiator-to-reservoir connections\u003c\/li\u003e\n  \u003cli\u003eNot intended for fuels, strong solvents, or pressurized hydraulic fluids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technicians, home mechanics, fleet managers, and DIY enthusiasts who need a dependable, long run of heater hose will find this product useful. Its 50-foot length allows repairs, custom routing, or stocking for multiple vehicles, while the SAE-rated construction and EPDM chemistry give confidence for use in everyday cooling and heater plumbing scenarios.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose be used with antifreeze and coolant mixtures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The EPDM construction is compatible with coolant, water, and typical antifreeze blends used in automotive cooling systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the minimum bend radius and why does it matter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Minimum bending radius is 128 mm. Staying above this prevents kinks and ensures proper flow and hose longevity.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585449984185,"sku":"B0F1TQPHQF","price":254.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-50ft-coil.jpg?v=1790470631"},{"product_id":"evil-energy-ls-stainless-steel-coolant-crossover-steam-vent-kit-black-cnc-aluminum-manifold-leak-proof-seals","title":"EVIL ENERGY LS Stainless Steel Coolant Crossover Steam Vent Kit — Black CNC Aluminum Manifold, Leak‑Proof Seals","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY LS Stainless Steel Coolant Crossover Steam Vent Kit is a complete black-anodized steam port system that links front and rear LS head ports to purge trapped steam and improve coolant circulation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your LS-powered vehicle runs hot in demanding conditions or you want a cleaner, more reliable cooling path for performance builds, this kit is made to address steam pockets and encourage even coolant flow. It installs using pre-labeled driver and passenger lines, includes fittings and sealing hardware, and is constructed from corrosion-resistant 304 stainless steel with a CNC-machined aluminum manifold finished in black anodize.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit reduce steam pockets and help coolant flow?\u003c\/h3\u003e\n\u003cp\u003eThe steam vent kit links the factory steam ports at the front and rear of LS cylinder heads, so air and trapped vapors have a direct path out of the head. By allowing steam to escape, coolant can reoccupy those spaces and maintain consistent circulation around combustion chambers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnects front and rear steam ports with stainless lines for continuous flow.\u003c\/li\u003e\n  \u003cli\u003eLow-restriction AN fittings maintain coolant path integrity.\u003c\/li\u003e\n  \u003cli\u003eIncluded O-rings and shims ensure leak-free seals at port connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eThe kit is supplied as a complete system: pre-bent stainless tubes labeled for driver and passenger sides, CNC aluminum manifold, AN fittings, PTFE tape, O-rings, shims and an installation manual. Clear labeling and supplied hardware simplify installation for most mechanically competent enthusiasts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-labeled tubes for driver and passenger sides to avoid routing errors.\u003c\/li\u003e\n  \u003cli\u003ePTFE tape and spare O-rings included for secure, leak-proof joins.\u003c\/li\u003e\n  \u003cli\u003eManual walks through mounting and sealing; basic hand tools required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich LS engines and intake systems is it compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis EVIL ENERGY steam port kit fits many popular Gen III\/IV LS variants commonly used in performance swaps and builds: LS1, LS2, LS3, LS6, LS7 and LSX. It is compatible with a wide range of aftermarket EFI systems and many Gen 3 truck plastic intakes, but it is not compatible with Gen4 truck intakes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits LS1, LS2, LS3, LS6, LS7 and LSX heads (Gen 3 family).\u003c\/li\u003e\n  \u003cli\u003eWorks with SR1\/SR3 Titan (remote MAP sensor required) and many Holley EFI systems.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Gen4 truck plastic intake designs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there special notes for LS3\/L92 rear ports or long-term durability?\u003c\/h3\u003e\n\u003cp\u003eLS3 and L92 heads often have factory aluminum rear port plugs that must be removed before installing the kit. Use careful punching or controlled drilling to avoid metal debris entering coolant passages. The materials chosen resist coolant corrosion for reliable long-term service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLS3\/L92 rear plugs must be removed—prevent metal chips from entering passages.\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel tubing resists corrosion from coolant exposure.\u003c\/li\u003e\n  \u003cli\u003eBlack anodized CNC aluminum manifold offers durable, heat-resistant finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Builders, racers and performance vehicle owners running Gen III LS motors who want to reduce head temperature inconsistencies and improve coolant circulation will value this kit. It suits naturally aspirated and forced-induction projects, drag, drift, endurance, and off-road applications where heat management and reliability matter. Installers with basic mechanical experience can fit the kit using the included hardware and manual; professional installation is recommended if you are unsure about removing factory plugs or routing coolant lines.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my LS3 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the kit fits LS3 heads but LS3\/L92 rear plug removal is required—avoid metal debris entering passages.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is special tooling required for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools beyond standard hand tools; the kit includes fittings, O-rings and PTFE tape for sealing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585450311865,"sku":"B0F84Y1YSM","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-manifold.jpg?v=1790470661"},{"product_id":"evil-energy-wheel-spacers-6x5-5-2-77-8mm-hubcentric-6061-t6-billet-cnc-anodized-m14x1-5-studs","title":"EVIL ENERGY Wheel Spacers 6x5.5 (2\") 77.8mm Hubcentric — 6061-T6 Billet CNC Anodized, M14x1.5 Studs","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 2\" 6x5.5 wheel spacers are billet 6061-T6, 77.8 mm hubcentric adapters with M14x1.5 studs designed to safely push wheels outward for clearance and stance improvements.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese spacers convert a 6×139.7 mm (6×5.5) bolt pattern and provide a precise hubcentric fit for compatible Dodge Ram 1500 trucks (model years 2019–2024). Machined from aircraft-grade 6061-T6 aluminum and anodized for corrosion resistance, they use 10.9-grade geomet bolts and are CNC-processed for tight tolerances. The 2\" thickness is intended to correct backspacing, improve tire clearance, and adjust track width with a focus on durability and fitment accuracy.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my Dodge Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eThese EVIL ENERGY spacers are made for trucks with a 6×139.7 mm (6×5.5) lug pattern and a 77.8 mm hub bore. Fitment depends on the year, trim, and any aftermarket components already installed on your truck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Dodge Ram 1500 models 2019–2024 that share the specified bolt pattern and hub bore.\u003c\/li\u003e\n  \u003cli\u003eCheck wheel backspacing and brake caliper clearance before purchase.\u003c\/li\u003e\n  \u003cli\u003eVerify hub dimensions against the 77.8 mm bore specification.\u003c\/li\u003e\n  \u003cli\u003eRefer to product pictures and vehicle notes to confirm fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these spacers constructed and secured?\u003c\/h3\u003e\n\u003cp\u003eThe spacers are CNC-machined from 6061-T6 aluminum billet and finished with an anodized surface to resist corrosion. They attach with M14x1.5 studs and 10.9-grade geomet bolts engineered for strength and longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 billet aluminum body for strength-to-weight balance.\u003c\/li\u003e\n  \u003cli\u003ePrecision CNC machining ensures concentricity and fitment accuracy.\u003c\/li\u003e\n  \u003cli\u003eAnodized finish resists oxidation and road elements.\u003c\/li\u003e\n  \u003cli\u003eSupplied bolts are 10.9-grade geomet treated to resist shear and corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill adding 2\" spacers affect driving feel or safety?\u003c\/h3\u003e\n\u003cp\u003eInstalling 2\" wheel spacers alters track width and wheel offset, which can change steering feel and load on suspension components. Proper installation and post-installation wheel balancing are recommended to maintain a smooth, safe ride.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMay improve stance and clearance, but can alter steering feedback slightly.\u003c\/li\u003e\n  \u003cli\u003eRecommended to have wheels professionally balanced after installation.\u003c\/li\u003e\n  \u003cli\u003eManual torqueing is advised to avoid over-tightening with power tools.\u003c\/li\u003e\n  \u003cli\u003ePeriodic re-torque checks help ensure long-term safety and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install these spacers correctly?\u003c\/h3\u003e\n\u003cp\u003eInstallation places the spacer between the wheel hub bearing and the wheel, following the spacer-to-hub orientation specific to your setup. Manual installation is recommended to avoid bolt damage; use a torque wrench and follow manufacturer torque specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount spacer onto hub, then thread supplied bolts\/studs to factory torque values.\u003c\/li\u003e\n  \u003cli\u003eInstall wheel over spacer and torque wheel nuts by hand first, finish with torque wrench.\u003c\/li\u003e\n  \u003cli\u003eAvoid using impact guns directly on spacer bolts to prevent cracking.\u003c\/li\u003e\n  \u003cli\u003eRecheck torque after initial road miles and have wheel balance checked.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: EVIL ENERGY 2\" 6x5.5 wheel spacers suit Ram 1500 owners (2019–2024) seeking improved clearance, a wider stance, or corrective backspacing without permanently altering wheels. They are aimed at drivers comfortable with aftermarket wheel modifications and who plan to follow installation best practices—manual torqueing, professional wheel balancing, and periodic maintenance checks—to maintain handling and safety.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these spacers hubcentric?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are hubcentric with a 77.8 mm bore designed to center on compatible hubs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to rebalance my wheels after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, professional wheel balancing is recommended after installing these spacers to reduce vibration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585453228217,"sku":"B0D9JMVL1K","price":323.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-spacer_5650d2bd-4382-40c2-b129-c73e3bfb7fa2.jpg?v=1790470774"},{"product_id":"evil-energy-cold-air-intake-for-2014-2018-chevy-silverado-gmc-sierra-1500-5-3l-6-2l-black-heat-shield-washable-pre-filter","title":"EVIL ENERGY Cold Air Intake for 2014–2018 Chevy Silverado\/GMC Sierra 1500 5.3L\/6.2L — Black, Heat Shield \u0026 Washable Pre-Filter","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's cold air intake kit upgrades airflow for 2014–2018 Chevy Silverado 1500 and GMC Sierra 1500 5.3L\/6.2L trucks, adding a heat shield and a washable pre-filter for cooler, cleaner air delivery.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis bolt-on intake system replaces the factory air path with a smooth-walled aluminum tube, engineered filter media, and a steel heat shield to reduce intake air temperatures and improve flow consistency. Designed specifically for 2014–2018 Silverado and Sierra 1500 models with the 5.3L or 6.2L engines, the kit installs with basic tools in about 40 minutes and keeps routine maintenance simple thanks to its washable, reusable filter elements.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this intake improve everyday driving?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY intake is built to provide steadier airflow and reduced intake temperatures so your engine breathes more efficiently across typical driving conditions. You’ll notice smoother throttle response and a more confident feel when accelerating, towing, or cruising.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother power delivery under load and during highway passing\u003c\/li\u003e\n  \u003cli\u003eConsistent airflow during uphill grades and while towing\u003c\/li\u003e\n  \u003cli\u003eBalanced cabin noise with a deeper, refined engine tone under acceleration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the filtration and maintenance features?\u003c\/h3\u003e\n\u003cp\u003eThe system uses a multi-layer synthetic non-woven filter rated over 98% filtration efficiency and includes a washable pre-filter to capture larger debris. Maintenance is straightforward: rinse, dry, and reinstall — no frequent replacements required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-layer synthetic filter: washable and reusable\u003c\/li\u003e\n  \u003cli\u003ePre-filter for dust-prone environments extends service intervals\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain filtration efficiency while increasing airflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installation fit my Silverado\/Sierra and take long?\u003c\/h3\u003e\n\u003cp\u003eThe kit is vehicle-specific for 2014–2018 Chevy Silverado 1500 and GMC Sierra 1500 with 5.3L or 6.2L engines. It’s engineered for a direct-fit installation using common hand tools, typically completed in about 40 minutes by someone with basic mechanical comfort.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit components tailored to the listed model years and engines\u003c\/li\u003e\n  \u003cli\u003eIncludes heat shield and mounting hardware for a secure install\u003c\/li\u003e\n  \u003cli\u003eEstimated install time: approximately 40 minutes with basic tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the heat shield and tube design affect performance?\u003c\/h3\u003e\n\u003cp\u003eThe steel heat shield separates the intake from engine bay heat while the smooth-walled aluminum tube promotes laminar airflow and reduces turbulence. Together they help deliver cooler, denser air to the throttle body under a range of driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel heat shield minimizes radiant heat transfer from the engine bay\u003c\/li\u003e\n  \u003cli\u003eSmooth-walled aluminum tube reduces flow resistance and turbulence\u003c\/li\u003e\n  \u003cli\u003eComponent fitment preserves throttle response and consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own a 2014–2018 Chevy Silverado 1500 or GMC Sierra 1500 with the 5.3L or 6.2L engine and want a practical performance upgrade. This kit suits owners seeking improved airflow, a washable filter to reduce recurring costs, and a straightforward install without major modifications. It's a good match for daily drivers, weekend haulers, and light towing use where reliability, cleaner intake air, and a more engaging acceleration sound are priorities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this intake compatible with my 2016 Chevy Silverado 5.3L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit fits 2014–2018 Silverado 1500 and Sierra 1500 with 5.3L or 6.2L engines; verify engine and model year before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I clean the EVIL ENERGY filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Clean intervals depend on conditions; generally inspect every 10,000–20,000 miles and wash sooner in dusty environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585469972665,"sku":"B0FD2SFV2P","price":332.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-cold-air-intake-front-assembly.jpg?v=1790470852"},{"product_id":"evil-energy-6x135-wheel-spacers-1-5-inch-hubcentric-for-f150-6061-t6-aluminum-black-m14x1-5","title":"EVIL ENERGY 6x135 Wheel Spacers 1.5-inch Hubcentric for F150 — 6061‑T6 Aluminum Black, M14x1.5","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 1.5-inch 6x135 hubcentric wheel spacers are a four-piece kit engineered to increase track width and correct backspacing for Ford F150 (2015–2025) and compatible models while keeping hub alignment with the 87.1 mm center bore.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese wheel spacers are made from 6061-T6 aircraft-grade aluminum and machined with CNC precision, then anodized for surface protection. The kit includes four 1.5\" (38.1 mm) spacers with M14x1.5 studs and 10.9-grade geomet bolts; it’s intended for vehicles using a 6x135 mm bolt pattern and an 87.1 mm hub bore. Use them to create additional clearance for larger tires, improve wheel stance, or resolve fitment issues between wheel and brake or suspension components.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my truck?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility depends on year, make and model and the vehicle’s bolt pattern and hub bore. This kit is designed for Ford F150 (2015–2025), Expedition (2015–2024), Lobo (2015–2022), and Lincoln Navigator (2015–2024) that use a 6x135 mm pattern and 87.1 mm hub bore.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 6x135 mm\u003c\/li\u003e\n  \u003cli\u003eCenter bore: 87.1 mm (hubcentric design)\u003c\/li\u003e\n  \u003cli\u003eStud\/thread spec: M14 x 1.5\u003c\/li\u003e\n  \u003cli\u003eConfirm your vehicle year\/model and hub size before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these spacers built and how durable are they?\u003c\/h3\u003e\n\n\u003cp\u003eThe spacers are precision CNC-machined from 6061-T6 aluminum billet, then anodized to improve corrosion resistance and surface hardness. Fasteners are 10.9-grade geomet-treated bolts, chosen to resist breakage and provide torque reliability under normal road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 6061-T6 aircraft aluminum\u003c\/li\u003e\n  \u003cli\u003eManufacturing: CNC machining for tight tolerances\u003c\/li\u003e\n  \u003cli\u003eSurface: Anodized finish for protection\u003c\/li\u003e\n  \u003cli\u003eHardware: 10.9-grade geomet bolts included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does installation involve and what should I prepare?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation places the spacer between the wheel hub and the wheel; the exact assembly order varies by whether you’re bolting spacer to hub first or sliding spacer over factory studs. The package includes the spacers, studs\/nuts for mounting, protective gloves and cleaning wire balls to prep mounting surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall position: between hub bearing and wheel\u003c\/li\u003e\n  \u003cli\u003eTools: torque wrench, socket set, jack and stands\u003c\/li\u003e\n  \u003cli\u003ePrep: clean mating surfaces with included wire balls\u003c\/li\u003e\n  \u003cli\u003eTorque: follow vehicle and spacer torque specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical effects will I notice on the road?\u003c\/h3\u003e\n\n\u003cp\u003eA 1.5\" spacer increases track width and moves wheels outward by 38.1 mm, improving clearance for wider tires or aftermarket brakes while altering vehicle stance. Properly installed hubcentric spacers should maintain alignment of the wheel to the hub, reducing vibration risks when matched to the correct bore and bolt pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreases wheel offset by 1.5 inches\u003c\/li\u003e\n  \u003cli\u003eHelps clear larger tires or brake kits\u003c\/li\u003e\n  \u003cli\u003eImproves wheel stance and fitment options\u003c\/li\u003e\n  \u003cli\u003eDesigned to be hubcentric for reduced imbalance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: EVIL ENERGY 6x135 1.5\" wheel spacers are aimed at truck owners who need a precise, durable spacer solution for Ford F150 (2015–2025) and compatible Ford\/Lincoln models. They suit DIY installers and professional shops that want CNC-machined aluminum spacers with proper hardware to address clearance, fitment or aesthetic goals. Always verify compatibility with your vehicle’s bolt pattern, hub bore and lug specifications before purchase; if uncertain, consult a wheel-and-tire specialist or your vehicle manual.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these spacers hubcentric for my F150?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They have an 87.1 mm hub bore designed to be hubcentric for compatible 6x135 mm Ford\/Lincoln hubs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the spacers include all required hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes four spacers, M14x1.5 studs\/nuts and 10.9-grade geomet bolts plus gloves and cleaning wire balls.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585476526265,"sku":"B0CJRH7QTZ","price":288.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-wheel-spacer-kit.jpg?v=1790471040"},{"product_id":"evil-energy-5x4-5-wheel-spacers-1-5-38mm-82-5mm-bore-6061-t6-aluminum-1-2x20-studs","title":"EVIL ENERGY 5x4.5 Wheel Spacers 1.5\" (38mm) 82.5mm Bore — 6061-T6 Aluminum, 1\/2x20 Studs","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 5x4.5 wheel spacers are 1.5\" (38mm) aluminum spacers with 82.5mm non-hubcentric bore and 1\/2\"x20 studs designed to fit many Ford, Jeep, Lincoln, and Mercury applications for improved stance and clearance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese billet 6061-T6 aluminum spacers give your vehicle extra track width and tire clearance while using 10.9-grade geomet bolts and CNC machining for consistent fit. They are built to address backspacing and rubbing issues, improve wheel fitment, and provide a stable, durable interface between wheel and hub when properly installed and balanced.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these spacers affect wheel fitment and clearance?\u003c\/h3\u003e\n\u003cp\u003eAdding a 1.5\" spacer effectively moves the wheel outward, which increases clearance between suspension components and wide tires. This can prevent rubbing on inner fenders or control arms and allows for more aggressive offset wheels without changing factory parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThickness: 1.5\" (38 mm) increases track width and tire clearance.\u003c\/li\u003e\n  \u003cli\u003eBolt pattern: 5×4.5 (5×114.3 mm) matches many OEM hubs.\u003c\/li\u003e\n  \u003cli\u003eNon-hubcentric bore: 82.5 mm — requires careful fitment verification.\u003c\/li\u003e\n  \u003cli\u003eThread size: 1\/2\"x20 studs compatible with common lug hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these spacers strong and reliable for everyday driving?\u003c\/h3\u003e\n\u003cp\u003eThe spacers are machined from 6061-T6 aircraft-grade aluminum and use hardened 10.9-grade geomet bolts to resist cracking and wear under normal driving loads. Quality anodizing and CNC processing improve dimensional accuracy, but correct installation and torque are essential for long-term reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 6061-T6 billet aluminum for strength-to-weight balance.\u003c\/li\u003e\n  \u003cli\u003eFasteners: 10.9-grade geomet bolts for added durability.\u003c\/li\u003e\n  \u003cli\u003eFinish: Anodized surface for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eManufacturing: CNC machining for precise bolt patterns and thickness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these wheel spacers?\u003c\/h3\u003e\n\u003cp\u003eInstall spacers between the wheel hub bearing and the wheel, following the vehicle’s hub and spacer alignment. Manual torqueing is advised to avoid over-tightening with power tools; recheck torque after initial miles and have wheels balanced to reduce vibration risks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePosition: Spacer mounts to hub, wheel mounts to spacer face.\u003c\/li\u003e\n  \u003cli\u003eTorque: Hand-tighten initially and finish with calibrated torque wrench.\u003c\/li\u003e\n  \u003cli\u003ePost-install: Have wheels professionally balanced to minimize vibration.\u003c\/li\u003e\n  \u003cli\u003eInspection: Re-torque after short test drive and periodically thereafter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles will these spacers fit and what compatibility checks are needed?\u003c\/h3\u003e\n\u003cp\u003eThe 5×4.5 (5×114.3 mm) bolt pattern fits many Ford, Jeep, Lincoln, and Mercury models, but the 82.5 mm non-hubcentric bore means hub-centric rings or additional checks may be necessary. Always confirm year\/make\/model fitment and verify hub diameter and stud thread specification before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible makes: Ford, Jeep, Lincoln, Mercury (verify specific models).\u003c\/li\u003e\n  \u003cli\u003eBore size: 82.5 mm — not hubcentric; may need centering rings for perfect alignment.\u003c\/li\u003e\n  \u003cli\u003eStuds: 1\/2\"x20 — ensure lug nuts match thread size.\u003c\/li\u003e\n  \u003cli\u003eRecommendation: Cross-check vehicle hub diameter and suspension clearance images.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These EVIL ENERGY spacers are intended for owners who need extra track width or clearance for wider tires and aftermarket wheels on compatible Ford, Jeep, Lincoln, and Mercury vehicles. They suit DIYers and professional installers comfortable with torque specs, wheel balancing, and compatibility checks who want a CNC-machined aluminum spacer for improved fitment and stance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers need hub-centric rings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Because they have an 82.5mm non-hubcentric bore, hub-centric rings are recommended if your wheel needs hub centering to reduce vibration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these with a power impact wrench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Manual torqueing is advised; avoid impact tools to prevent over-tightening and possible bolt damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585477542073,"sku":"B0D9JNVKW5","price":238.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-view-wheel-spacer.jpg?v=1790471119"},{"product_id":"evil-energy-6an-adjustable-efi-fuel-pressure-regulator-black-20-75psi-or-75-120psi-range-includes-gauge-fittings","title":"EVIL ENERGY 6AN Adjustable EFI Fuel Pressure Regulator — Black, 20–75PSI or 75–120PSI Range, Includes Gauge \u0026 Fittings","description":"\u003cp\u003e\u003cstrong\u003eThe EVIL ENERGY 6AN adjustable bypass fuel pressure regulator lets you precisely control EFI fuel pressure between 20–75 PSI (stock spring) or 75–120 PSI (replacement spring) for gasoline and alcohol blends.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, black aluminum regulator is built for aftermarket EFI systems that use a return-style plumbing layout. It ships with a pressure gauge, extra spring, multiple AN-to-ORB fittings and thread sealant so you can configure and monitor fuel pressure right away. The unit is compatible with gasoline and E85-type fuels (note: not for diesel and nylon-braided lines that are incompatible with E85), and its top-mounted adjustment screw gives quick, repeatable control over system pressure.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I set and adjust the fuel pressure?\u003c\/h3\u003e\n\u003cp\u003eAdjusting the EVIL ENERGY regulator is a straightforward process: start with the pre-installed spring for 20–75 PSI or swap in the supplied spring for 75–120 PSI, then turn the top screw to fine-tune pressure while watching the included gauge. Always make small turns and verify pressure under typical engine conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the pre-installed spring for 20–75 PSI operation.\u003c\/li\u003e\n  \u003cli\u003eInstall the replacement spring for higher 75–120 PSI range.\u003c\/li\u003e\n  \u003cli\u003eClockwise turns raise pressure; counterclockwise lowers it.\u003c\/li\u003e\n  \u003cli\u003eInstall the gauge on the NPT port using supplied thread tape to seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings and hardware come in the package?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes multiple AN-to-ORB fittings that cover common fuel line sizes and mounting needs so you can connect feed and return lines without sourcing extra adapters. It also provides an allen key, an AN10 port plug, and sealant tape to help complete a clean installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1× pressure gauge and 1× AN10 port plug for monitoring and sealing.\u003c\/li\u003e\n  \u003cli\u003eAN fittings: AN6→AN6 ORB, two AN6→AN10 ORB, two AN8→AN10 ORB, two AN10→AN10 ORB.\u003c\/li\u003e\n  \u003cli\u003e1× replacement spring, 1× allen key, and sealing tape included.\u003c\/li\u003e\n  \u003cli\u003eComes assembled with pre-installed spring for immediate use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fuels and systems is this regulator compatible with?\u003c\/h3\u003e\n\u003cp\u003eDesigned for return-style EFI systems, this regulator works with gasoline and alcohol\/ethanol blends including E85, but it is not designed for diesel. If your fuel lines use nylon braided hose, confirm E85 compatibility before running ethanol blends.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: gasoline and E85\/alcohol fuels.\u003c\/li\u003e\n  \u003cli\u003eNot compatible: diesel fuel systems and some nylon braided lines with E85.\u003c\/li\u003e\n  \u003cli\u003eRecommended: professional installation for pressurized fuel systems.\u003c\/li\u003e\n  \u003cli\u003eUse thread sealant tape at the NPT gauge port to avoid leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain the regulator for reliable performance?\u003c\/h3\u003e\n\u003cp\u003eMount the regulator away from excessive heat and secure it to a stable bracket, plumb feed and return lines with the right AN fittings, and always use the included sealant tape on the gauge port. Periodic inspection for leaks and checking that the set-screw remains in the desired position will keep systems consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount in a protected location, avoiding direct exhaust or intense heat.\u003c\/li\u003e\n  \u003cli\u003eUse the included AN fittings and plug for correct hose sizing and sealing.\u003c\/li\u003e\n  \u003cli\u003eVerify installation with a fuel pressure test under load conditions.\u003c\/li\u003e\n  \u003cli\u003eInspect fittings and replace sealant or O-rings if any seepage appears.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The EVIL ENERGY adjustable 6AN bypass regulator is aimed at enthusiasts, tuners and professional shops installing or upgrading return-style EFI systems on cars, motorcycles, or race applications where precise fuel pressure control matters. It’s a good fit for builds using gasoline or ethanol blends that need a robust, serviceable regulator with ready-to-install fittings and a wide adjustable range.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this regulator with E85 fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the regulator is compatible with gasoline and E85\/ethanol blends, but verify your fuel line material supports E85.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure ranges are available out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The pre-installed spring covers 20–75 PSI; swap the included replacement spring to reach 75–120 PSI.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585493827769,"sku":"B0FBR76981","price":179.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-regulator-front-view_2efc9c45-c5d9-4167-8da5-054794371245.jpg?v=1790471600"},{"product_id":"evil-energy-58-psi-fuel-regulator-300lph-external-pump-kit-for-ls-swap-4-8-5-3-6-0-10-µm-filter-high-flow","title":"EVIL ENERGY 58 PSI Fuel Regulator \u0026 300LPH External Pump Kit for LS Swap (4.8\/5.3\/6.0) — 10‑µm Filter, High‑Flow","description":"\u003cb\u003eEVIL ENERGY's kit pairs a 58 PSI inline fuel pressure regulator with a high‑flow 300 LPH external electric pump to support LS-series EFI swaps and high‑output V8 builds.\u003c\/b\u003e\n\n\u003cp\u003eDesigned for LS engine conversions and performance upgrades, this kit combines a precision regulator with a durable external pump and all necessary fittings. It delivers stable fuel pressure, filtration, and strong flow to feed EFI systems on 4.8L, 5.3L, and 6.0L Chevy V8s while simplifying installation with below‑tank pump placement and engine‑bay regulator mounting.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit keep fuel pressure steady for LS swap EFI systems?\u003c\/h3\u003e\n\u003cp\u003eThe regulator is preset to 58 PSI and uses a built‑in 10‑micron filter element to maintain clean, consistent fuel pressure for EFI injectors. That pressure stability helps the engine receive the amount of fuel it expects under load and throttle changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory‑style 58 PSI preset for LS EFI calibrations\u003c\/li\u003e\n  \u003cli\u003e10‑micron filtration to reduce injector contamination\u003c\/li\u003e\n  \u003cli\u003eEngine‑bay mounting for short return lines and stable readings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the 300LPH pump support high‑horsepower demands and different fuels?\u003c\/h3\u003e\n\u003cp\u003eThe external electric pump is rated to deliver up to 300 liters per hour at 13.5V and is capable of operating under up to 75 PSI, making it suitable for many high‑output applications. It's compatible with gasoline and diesel, and its wide temperature tolerance ensures reliable operation in varied climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMax flow: 300 LPH (13.5V) for sustained fueling needs\u003c\/li\u003e\n  \u003cli\u003ePressure endurance up to 75 PSI for forced‑induction or high‑flow systems\u003c\/li\u003e\n  \u003cli\u003eTemperature range −68°F to 194°F for harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the kit include to make installation straightforward?\u003c\/h3\u003e\n\u003cp\u003eThe package arrives with the regulator, pump, a dedicated bracket and a selection of adapters and quick‑disconnect fittings so you won’t need to source extra hardware. Below‑tank mounting for the pump helps ensure reliable feed to the system, while the engine‑bay regulator placement simplifies pressure control and tuning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x 58 PSI fuel filter regulator with 10‑micron element\u003c\/li\u003e\n  \u003cli\u003e1x 300LPH external electric fuel pump and mounting bracket\u003c\/li\u003e\n  \u003cli\u003eComprehensive adapter set: M12x1.5→AN6, AN10→M18x1.5, multiple AN6\/AN10 quick‑disconnect fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this kit compatible with my Chevy LS V8 and EFI setup?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY kit is engineered for 1999–2014 Chevy LS‑series V8 engines (4.8L, 5.3L, 6.0L) and standard 12V electronic fuel injection systems. It fits common LS swap scenarios and is adaptable with the included fittings, though some custom plumbing or wiring may be required for non‑stock installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 4.8L, 5.3L, 6.0L LS engines\u003c\/li\u003e\n  \u003cli\u003eWorks with 12V DC EFI systems and both gasoline and diesel\u003c\/li\u003e\n  \u003cli\u003eIncluded fittings reduce the need for extra plumbing parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: this kit is aimed at mechanics, hobbyists, and performance builders performing LS engine swaps or upgrading fuel delivery for boosted or high‑horsepower Chevy V8s. If you need a reliable external pump, a preset high‑pressure regulator with filtration, and a mostly complete hardware package to simplify installation, this EVIL ENERGY assembly is built to meet those needs. For custom EFI tuning, pairing the kit with proper gauge wiring, mounting hardware, and an engine management strategy will deliver the best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit be used with boosted LS engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the pump supports high flow up to 300LPH and the regulator handles pressure up to 75 PSI, suitable for many boosted setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include all plumbing fittings for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It includes a broad set of adapters and quick‑disconnects, but some builds may require additional hoses or custom fittings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67585494319289,"sku":"B0GJCR3Y8C","price":292.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-assembly_9049280f-0bc4-4663-9b16-6a54f1a69528.jpg?v=1790471620"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/evil-energy-hose-finisher-front-view.jpg?v=1790612506","url":"https:\/\/redleafauto.ca\/collections\/evil-energy.oembed?page=8","provider":"Redleaf Auto","version":"1.0","type":"link"}