{"title":"Car Wash, Wax \u0026 Polish","description":"\u003cp\u003eShampoos, foam, waxes, sealants and polishes. A sealant before winter makes salt and grime easier to rinse off.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"swift-auto-care-touchless-ceramic-foamable-wax-1-gallon-spray-on-rinse-off-sio2-hydrophobic-gloss-for-cars-trucks-rvs","title":"Swift Auto Care Touchless Ceramic Foamable Wax 1 Gallon — Spray-On Rinse-Off SiO2 Hydrophobic Gloss for Cars, Trucks \u0026 RVs","description":"\u003cp\u003e\u003cstrong\u003eSwift Touchless Ceramic Foamable Wax is a spray-on\/rinse-off SiO2-enhanced foam wax that adds a hydrophobic, high-gloss protective layer without any rubbing or buffing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for use with foam cannons and foam pump sprayers, this concentrated, bubblegum-scented formula turns a post-wash rinse into a quick, protective waxing step. Instead of hand-waxing or laborious wiping, you apply a lightweight foam to a wet surface, allow it to dwell briefly, then rinse to leave a glossy, water-repellent finish. It’s formulated to be safe on a wide range of exterior surfaces and scaled for everything from daily drivers to large RVs and trailers.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use this touchless wax with a foam cannon?\u003c\/h3\u003e\n\u003cp\u003eAfter washing and rinsing your vehicle, mix the concentrate per the label and fill your foam cannon. Apply foam evenly over the wet surface, let it sit two to three minutes, then rinse away thoroughly. No towel-drying or buffing is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended dilution: 5:1 (five ounces water to one ounce concentrate)\u003c\/li\u003e\n  \u003cli\u003eApply to a clean, wet exterior following a standard wash\u003c\/li\u003e\n  \u003cli\u003eAllow 2–3 minutes dwell time; avoid letting it dry on the panel\u003c\/li\u003e\n  \u003cli\u003eRinse completely with low-pressure or standard rinse\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does the ceramic formula provide?\u003c\/h3\u003e\n\u003cp\u003eThe formula contains SiO2 polymers that bond into a very thin, slick layer on the surface, encouraging water to bead and run off. This barrier helps reduce accumulation of road grime and provides an additional shield against UV exposure and contaminants without altering paint texture.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates hydrophobic surface for improved water beading\u003c\/li\u003e\n  \u003cli\u003eReduces surface dirt adhesion and makes follow-up washes easier\u003c\/li\u003e\n  \u003cli\u003eHelps defend against UV fading and light environmental contaminants\u003c\/li\u003e\n  \u003cli\u003eLeaves a glossy finish that enhances color depth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the product safe for different exterior materials?\u003c\/h3\u003e\n\u003cp\u003eYes — this wax is formulated to be compatible with many exterior finishes. It can be used on clearcoat paint, glass, plastics, chrome, metal trims, and even on top of existing ceramic coatings, vinyl wrap, and paint protection film when used as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe on paint, glass, plastic, rubber, chrome, aluminum, stainless steel\u003c\/li\u003e\n  \u003cli\u003eCompatible with ceramic-coated and vinyl-wrapped vehicles\u003c\/li\u003e\n  \u003cli\u003eNon-abrasive, no polishing or rubbing required\u003c\/li\u003e\n  \u003cli\u003eAvoid application in direct sun or on hot surfaces for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this product save time for large vehicles and fleets?\u003c\/h3\u003e\n\u003cp\u003eBecause it’s spray-on and rinse-off, the Touchless Wax eliminates the manual labor of hand-waxing and microfiber buffing. That makes waxing large surfaces like trucks, RVs, trailers, or fleet vehicles faster and more consistent, cutting labor time while delivering visible gloss and protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplies quickly via foam cannon or pump sprayer across big panels\u003c\/li\u003e\n  \u003cli\u003eConcentrated gallon yield stretches further for fleet use\u003c\/li\u003e\n  \u003cli\u003eReduces downtime between washes and protective treatments\u003c\/li\u003e\n  \u003cli\u003eConsistent results across many vehicles without specialized training\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Swift Touchless Ceramic Foamable Wax is ideal for car owners, detailers, and fleet managers who want a low-effort, high-visual-impact protective layer after washing. It’s especially useful for people with large vehicles or multiple units to maintain, anyone who prefers minimal hands-on finishing, and those looking to add SiO2-style hydrophobic protection without a full ceramic coating process. Follow dilution and application guidelines for best results and compatibility with delicate surfaces.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this wax over an existing ceramic coating?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s safe to use on top of ceramic coatings to add temporary hydrophobic boost and shine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What dilution ratio should I use in a foam cannon?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use the recommended 5:1 ratio (five ounces water to one ounce concentrate) for optimal foam and coverage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Swift Auto Care","offers":[{"title":"Default Title","offer_id":67584848822457,"sku":"B0CDVHP8B6","price":196.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/swift-touchless-gallon-front-label.jpg?v=1790456345"},{"product_id":"chemical-guys-big-mouth-foam-cannon-kit-blueberry-snow-foam-adjustable-pressure-washer-performance","title":"Chemical Guys Big Mouth Foam Cannon Kit — Blueberry Snow Foam, Adjustable Pressure-Washer Performance","description":"\u003cp\u003e\u003cstrong\u003eThe Chemical Guys Big Mouth Foam Cannon kit produces dense, clinging snow foam that lifts dirt and adds lubrication so you can wash vehicles with less risk of scratches.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit pairs the TORQ Professional Snow Foam Cannon (EQP366) with Chemical Guys Blueberry snow foam wash soap to deliver a professional-style pre-wash using a pressure washer. The cannon creates a rich foam blanket that holds cleaning agents against paint, helping loosen contaminants before you touch the surface. Built for hobbyists and pros, the assembly is adjustable, compatible with most pressure washers, and designed for long-term use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Big Mouth Foam Cannon make washing safer?\u003c\/h3\u003e\n\u003cp\u003eBy applying thick foam that encapsulates loose grit and grime, the cannon minimizes abrasive contact during hand washing. The foam provides additional lubrication so mitts and brushes glide more easily, cutting down on drag that causes swirls and micro-marring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates a clingy foam layer to suspend dirt away from paint\u003c\/li\u003e\n  \u003cli\u003eReduces direct contact and friction during manual washes\u003c\/li\u003e\n  \u003cli\u003eImproves rinsing efficiency so contaminants rinse off rather than get rubbed in\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat controls and spray patterns does the foam cannon offer?\u003c\/h3\u003e\n\u003cp\u003eThe TORQ cannon includes an adjustable nozzle and foam-output control, so you can tailor coverage to the job — broad fan for fast full-panel coverage or a focused stream for stubborn spots. Fine-tuning foam density and spray width helps conserve soap and target problem areas without waste.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRotating nozzle adjusts spray from wide fan to narrow cone\u003c\/li\u003e\n  \u003cli\u003eDial to change foam thickness for heavy pre-soak or light rinsing\u003c\/li\u003e\n  \u003cli\u003eFits standard pressure washer fittings for quick attachment and swap-out\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich cleaning solutions work with this foam cannon and what does Blueberry do?\u003c\/h3\u003e\n\u003cp\u003eThe cannon is compatible with Chemical Guys car wash soaps, foam concentrates, and most pH-balanced detailing solutions. Blueberry Snow Foam is formulated to produce voluminous, clingy suds that boost visual coverage and cleaning action during the pre-wash stage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with Chemical Guys shampoos, foams, and diluted cleaners\u003c\/li\u003e\n  \u003cli\u003eBlueberry concentrate mixes to produce thick, persistent foam\u003c\/li\u003e\n  \u003cli\u003eSafe for paint, glass, wheels and most exterior surfaces when diluted properly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and user-friendly is the TORQ Professional Snow Foam Cannon?\u003c\/h3\u003e\n\u003cp\u003eConstructed from heavy-duty components for repeated use, the cannon withstands regular detailing workflows. Its simple connection and intuitive controls make it approachable for enthusiasts while offering the reliability pros expect.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSturdy valve and housing for long-term performance\u003c\/li\u003e\n  \u003cli\u003eEasy connect design works with most pressure washer lances\u003c\/li\u003e\n  \u003cli\u003eQuick-change nozzle and clear bottle for fast setup and monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Detailers, car-care enthusiasts, and anyone who wants a safer, faster pre-wash will benefit from this kit. It’s ideal for owners of cars, trucks, motorcycles, RVs, and show vehicles who prefer a high-foam pre-soak to loosen grime before contact cleaning. If you want a durable foam cannon paired with a reliable, foamy wash soap that enhances lubrication and visibility of coverage, this Chemical Guys kit is purpose-built for that workflow.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this foam cannon fit my pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The TORQ cannon fits most standard pressure washer lances; check your washer’s nozzle quick-connect type and adapter compatibility before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How concentrated is the Blueberry snow foam soap?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Blueberry is a concentrated formula—follow the recommended dilution on the bottle; typical mixes create thick foam while conserving product.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Chemical Guys","offers":[{"title":"Default Title","offer_id":67584851574969,"sku":"B0D3MCZXKR","price":294.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/chemical-guys-big-mouth-foam-cannon-front-view.jpg?v=1790456446"},{"product_id":"chemical-guys-foam-blaster-car-wash-kit-14-piece-arsenal-builder-with-foam-blaster-6-5x16oz-cleaners-for-safe-swirl-reducing-w","title":"Chemical Guys Foam Blaster Car Wash Kit — 14-Piece Arsenal Builder with Foam Blaster 6, 5x16oz cleaners for safe, swirl-reducing w","description":"\u003cp\u003e\u003cstrong\u003eChemical Guys 14-piece Arsenal Builder is a complete at-home car detailing system centered on a hose-powered Foam Blaster 6 that delivers thick suds, cleaners, waxes, and accessories for safer, showroom-ready washes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis all-in-one kit packages professional-grade solutions and tools so you can wash, clean, and protect vehicles without a pressure washer. The set pairs five 16 oz Chemical Guys formulas—wash soap, wheel cleaner, dressing, wax, and glass cleaner—with a Foam Blaster that hooks to a standard garden hose, plus rinsing and finishing accessories. Everything is curated to reduce surface swirls, loosen grime, and simplify step-by-step detailing from wheels to windows.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Foam Blaster 6 improve home car washes?\u003c\/h3\u003e\n\u003cp\u003eThe Foam Blaster 6 attaches directly to a garden hose to spray dense foam that clings to paint, lifting dirt and breaking bonds before you touch the surface. That extra lubrication helps minimize friction and lowers the chance of marring during hand washing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnects to any standard garden hose—no power washer needed\u003c\/li\u003e\n  \u003cli\u003eProduces thick suds to encapsulate and lift soil\u003c\/li\u003e\n  \u003cli\u003eReduces friction for fewer wash-induced swirl marks\u003c\/li\u003e\n  \u003cli\u003eAdjustable spray pattern to suit cars, trucks, and motorcycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat cleaning and protection products are included and when should you use them?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains five 16 oz Chemical Guys best-sellers formulated for specific steps: a snow foam pre-wash, wheel cleaner, tire and trim dressing, sprayable paste wax, and a streak-free glass cleaner. Use them in sequence—foam pre-wash, two-bucket hand wash, wheel treatment, dry and protect, then finish glass—for a full detail routine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHoneydew Snow Foam: pre-wash to loosen surface dirt\u003c\/li\u003e\n  \u003cli\u003eDiablo Wheel Cleaner: applied to cool wheels for brake dust removal\u003c\/li\u003e\n  \u003cli\u003eSilk Shine Dressing: restores tires and exterior trim without greasy residue\u003c\/li\u003e\n  \u003cli\u003eButter Wet Wax: spray-on wax for quick gloss and protection\u003c\/li\u003e\n  \u003cli\u003eSignature Glass Cleaner: final wipe for clear, streak-free windows\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich accessories come with the kit and how do they prevent scratches?\u003c\/h3\u003e\n\u003cp\u003eThe Arsenal Builder supplies practical tools selected to limit contamination and abrasion during washing: a heavy-duty bucket with a grit guard, microfiber wash mitt, plush drying towels, and applicators. These components help trap grit away from the paint and provide soft contact points for safe cleaning and buffing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWash bucket with grit guard keeps dirt off the wash mitt\u003c\/li\u003e\n  \u003cli\u003eMicrofiber mitt and towels lift contaminants gently without scratching\u003c\/li\u003e\n  \u003cli\u003eApplicators distribute wax and dressing evenly for consistent coverage\u003c\/li\u003e\n  \u003cli\u003eDurable materials built for repeated, safe use on paint and trim\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this kit on different vehicle types and finishes?\u003c\/h3\u003e\n\u003cp\u003eYes—formulas and tools are designed for a wide range of vehicles and exterior surfaces, from sedans and trucks to motorcycles and RVs. Follow dilution and application instructions for painted surfaces, wheels, rubber, and glass to get safe, effective results without harming delicate finishes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for cars, SUVs, trucks, bikes, and RVs\u003c\/li\u003e\n  \u003cli\u003epH-balanced cleaners for painted surfaces when used as directed\u003c\/li\u003e\n  \u003cli\u003eSeparate tools for wheels and body to avoid cross-contamination\u003c\/li\u003e\n  \u003cli\u003eFlexible for beginners and experienced detailers alike\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: The Chemical Guys 14-Piece Arsenal Builder suits vehicle owners who want a single, organized set to perform complete exterior detailing at home—ideal for weekend enthusiasts, gift-giving to a car lover, or anyone upgrading from basic soap and a towel. It delivers a structured, step-by-step workflow with products and tools that reduce risk of surface damage while improving shine and cleanliness across multiple vehicle types.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a pressure washer to use the Foam Blaster 6?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The Foam Blaster 6 connects to a standard garden hose and produces thick foam without a pressure washer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit safe for clear coat paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, when products are diluted and applied as directed, the kit is formulated to be safe for clear coat finishes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Chemical Guys","offers":[{"title":"Default Title","offer_id":67584856457401,"sku":"B07FTRZLM5","price":315.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/chemical-guys-arsenal-builder-front-packaging.jpg?v=1790456594"},{"product_id":"mjjc-foam-cannon-s-v3-0-pressure-washer-foam-lance-34-oz-bottle-1-4-quick-connector-thicker-snow-foam","title":"MJJC Foam Cannon S V3.0 Pressure Washer Foam Lance — 34 oz Bottle, 1\/4\" Quick Connector, Thicker Snow Foam","description":"\u003cp\u003e\u003cstrong\u003eMJJC Foam Cannon S V3.0 is a pressure-washer foam lance that produces exceptionally thick, shaving-cream-like snow foam for faster, safer vehicle pre-wash.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe upgraded V3.0 Foam Cannon S combines a redesigned body, improved internal flow, and MJJC’s Thicker Snow Foam Technology to deliver dense foam using less shampoo. It ships with a 34 oz (1 L) bottle, a 1\/4 inch quick connector adapter, a sample soap, and multiple orifice options so you can tune spray and foam quality to your pressure washer’s output.\u003c\/p\u003e\n\n\u003ch3\u003eHow much thicker is the foam compared with earlier foam cannons?\u003c\/h3\u003e\n\u003cp\u003eThe V3.0 Foam Technology is engineered to create a richer, creamier foam texture that clings to surfaces longer than standard foamguns. That richer lather helps lift grime and extend contact time without increasing soap usage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThicker, shaving-foam-like suds with less shampoo\u003c\/li\u003e\n  \u003cli\u003eImproved internal mixing for denser bubbles\u003c\/li\u003e\n  \u003cli\u003eBetter cling on vertical surfaces for longer dwell times\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it connect to my pressure washer easily?\u003c\/h3\u003e\n\u003cp\u003eYes — the Foam Cannon S V3.0 includes a 1\/4 inch quick connector adapter and MJJC’s new fitting system for faster, tool-free attachment. The updated connection reduces leaks and eliminates the need for glue or PTFE tape.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4\" quick connector included for common washer guns\u003c\/li\u003e\n  \u003cli\u003eNew MJJC fitting design for leak-free installation\u003c\/li\u003e\n  \u003cli\u003eTamper-evident sealed packaging ensures kit integrity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pressure range and nozzle do I need for best results?\u003c\/h3\u003e\n\u003cp\u003eThe foam cannon works across a broad operating range (1300–3600 psi). It ships pre-installed with a 1.25 mm orifice (ideal for ~1600–2200 psi); the kit also includes a 1.10 mm nozzle for lower-pressure units. For pressures above 2200 psi, use a larger orifice (1.35 mm or greater) sold separately.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating range: 1300–3600 psi\u003c\/li\u003e\n  \u003cli\u003ePre-connected 1.25 mm orifice for 1600–2200 psi\u003c\/li\u003e\n  \u003cli\u003eIncluded 1.10 mm nozzle for 1300–1600 psi users\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I get consistent foam and use all the soap?\u003c\/h3\u003e\n\u003cp\u003eV3.0 improvements include a redesigned straw tube and bottle cap that let the cannon draw nearly all shampoo out of the bottle and make mounting simpler. Combined with the new spray structure and control, you’ll get a steadier spray pattern and predictable foam levels across sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eV3.0 straw tube reduces leftover liquid in the bottle\u003c\/li\u003e\n  \u003cli\u003eNew bottle and cap for easier attachment and less tipping risk\u003c\/li\u003e\n  \u003cli\u003eSmoother 360° spray control for consistent application\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The MJJC Foam Cannon S V3.0 is aimed at car enthusiasts, professional detailers, and DIYers who want a dense pre-wash foam without wasting shampoo. It’s especially useful if you own a compatible pressure washer in the 1300–3600 psi range and prefer quick-connect convenience, denser foam performance, and reduced product waste.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a quick connector?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, a 1\/4 inch quick connector adapter is included for common pressure-washer guns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure range does it support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Foam Cannon S V3.0 works from 1300 to 3600 psi; use different nozzles by pressure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MJJC","offers":[{"title":"Default Title","offer_id":67584869367993,"sku":"B0D1CNSMBR","price":211.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/mjjc-foam-cannon-s-v3-front-view.jpg?v=1790457034"},{"product_id":"clean-shampoo-v2-ph-neutral-car-wash-soap-128oz-biodegradable-high-lubricity-safe-for-coatings","title":"CLEAN. Shampoo V2 pH-Neutral Car Wash Soap 128oz — Biodegradable, High-Lubricity Safe for Coatings","description":"\u003cp\u003e\u003cstrong\u003eCLEAN. Shampoo V2 128oz is a pH-neutral, biodegradable car wash soap that cleans effectively while protecting waxes, sealants and ceramic coatings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis concentrated, high-lubricity shampoo was formulated to give professional-level cleaning with minimal risk to vehicle finishes or the environment. The blend uses cosmetic-grade surfactants for lift-and-carry cleaning action, a wetting agent to keep surfaces wetter longer, and a slickness that reduces marring during washing. It rinses clean with no residue, contains no PFAS or forever chemicals, and can be diluted for multiple uses including clay lubrication and bug pre-treatment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does CLEAN. Shampoo V2 clean without harming coatings or wax?\u003c\/h3\u003e\n\n\u003cp\u003eThe formula is pH neutral and free of harsh detergents that strip protective layers. It relies on gentle but effective cosmetic-grade surfactants that emulsify dirt and contaminants, letting them lift away without attacking sealants, waxes, or ceramic layers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003epH neutral base safe for coatings, sealants, and waxes\u003c\/li\u003e\n  \u003cli\u003eCosmetic-grade surfactants avoid aggressive stripping action\u003c\/li\u003e\n  \u003cli\u003eWetting agents extend dwell time for better soil release\u003c\/li\u003e\n  \u003cli\u003eRinses completely without leaving suds or film\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this shampoo with a foam cannon, bucket wash, or as clay lube?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the product was designed for versatility. It foams well from foam guns, produces slick lubrication in a two-bucket wash, and dilutes easily to act as a clay bar lubricant or light bug pre-treat.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFoam gun-ready for touchless pre-wash or presoak\u003c\/li\u003e\n  \u003cli\u003eHigh lubrication reduces swirl marks in a mitt or bucket wash\u003c\/li\u003e\n  \u003cli\u003eClay lube dilution: 0.5 oz per 32 oz water for safe glide\u003c\/li\u003e\n  \u003cli\u003eBug pre-treat: 1 oz per 32 oz water to loosen insect residue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill CLEAN. Shampoo V2 leave residue or streaks in sunlight?\u003c\/h3\u003e\n\n\u003cp\u003eNo — the wetting agent and balanced surfactant package help surfaces stay wet longer and promote even rinsing. Even when used outdoors in direct sun, the formula is engineered to rinse away cleanly without film, streaks, or spotty residue.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWetting agents reduce premature drying and spotting\u003c\/li\u003e\n  \u003cli\u003eRinses free of residue on painted surfaces and trim\u003c\/li\u003e\n  \u003cli\u003eSuitable for use in sun when applied and rinsed promptly\u003c\/li\u003e\n  \u003cli\u003eLeaves no dulling film that can attract grime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs CLEAN. Shampoo V2 environmentally safe and chemical-free?\u003c\/h3\u003e\n\n\u003cp\u003eThe shampoo is readily biodegradable and explicitly formulated without PFAS or other known forever chemicals. It balances performance with an eye toward reduced environmental persistence while still delivering professional cleaning results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBiodegradable surfactant system minimizes environmental impact\u003c\/li\u003e\n  \u003cli\u003ePFAS-free formulation eliminates forever-chemical concerns\u003c\/li\u003e\n  \u003cli\u003eConcentrated formula reduces packaging and shipping footprint\u003c\/li\u003e\n  \u003cli\u003eSafe for typical wastewater systems when used as directed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? CLEAN. Shampoo V2 128oz is aimed at auto detailers, enthusiasts, and anyone who wants a single, versatile wash product that combines gentle chemistry with high lubrication. If you need a safe, residue-free cleaner that works with coatings, waxes, and sealants — and can double as clay lube or bug pre-treat — this concentrated gallon-sized option provides economy, performance, and reduced environmental risk.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I dilute CLEAN. Shampoo V2 for a bucket wash?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use roughly 0.5–1 oz per gallon of water for regular washing; adjust for soils and mitt lubrication.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this safe on ceramic coatings and sealants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pH-neutral, PFAS-free formula is designed to clean without stripping coatings when used as directed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CLEAN. BY PAN THE ORGANIZER","offers":[{"title":"Default Title","offer_id":67584869597369,"sku":"B0F63S6MVW","price":183.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/clean-shampoo-v2-front-label.jpg?v=1790457033"},{"product_id":"chemical-guys-raging-rhino-exterior-total-interior-kit-5-piece-waterless-detail-kit-with-ceraphene-microfiber-towels","title":"Chemical Guys Raging Rhino Exterior \u0026 Total Interior Kit — 5-Piece Waterless Detail Kit with Ceraphene \u0026 Microfiber Towels","description":"\u003cp\u003e\u003cstrong\u003eThe Chemical Guys Raging Rhino Exterior \u0026amp; Total Interior Kit is a five-piece bundle that cleans and protects your vehicle’s paint and cabin without water, combining a Ceraphene-infused spray, an interior cleaner\/protectant, and three premium microfiber towels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit brings together Raging Rhino SmartOne waterless exterior spray and Chemical Guys Total Interior Cleaner and Protectant so you can refresh both the outside and inside of your car between full washes. Designed for quick maintenance, it removes light dust, fingerprint oils, pollen, and fresh road film on painted surfaces while conditioning dashboards, door panels, and trim. Everything you need for a rapid, low-effort detail is included in a single pack—no hose, bucket, or foam gun required.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Raging Rhino clean and protect paint without a hose?\u003c\/h3\u003e\n\u003cp\u003eRaging Rhino SmartOne uses a lubricating formula with Ceraphene Multi-Phase Surface Protection to lift contaminants and leave a hydrophobic layer as you wipe. The product lets you remove light soiling and deposit a ceramic-like finish that beads water and resists dust between washes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpray directly on panel or microfiber towel for safe lubrication\u003c\/li\u003e\n  \u003cli\u003eWipe in straight, overlapping strokes to avoid swirl marks\u003c\/li\u003e\n  \u003cli\u003eBuff to a glossy, streak-free surface using a clean towel\u003c\/li\u003e\n  \u003cli\u003eCompatible with existing waxes, sealants, and ceramic coatings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat interior surfaces does Total Interior Cleaner and Protectant work on?\u003c\/h3\u003e\n\u003cp\u003eTotal Interior Cleaner and Protectant is a pH-balanced formula for vinyl, plastic, rubber, dashboards, door panels, and center consoles. It cleans contaminants while leaving a conditioned, non-greasy finish that reduces dust pickup and restores natural appearance without a heavy shine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe on steering wheel, trim, and molding materials\u003c\/li\u003e\n  \u003cli\u003eConditions surfaces to reduce cracking and fading from UV exposure\u003c\/li\u003e\n  \u003cli\u003eLeaves no oily residue—ideal under electronics and controls\u003c\/li\u003e\n  \u003cli\u003eEasy spray-and-wipe application with included microfiber towels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I use this kit instead of a full wash or correction?\u003c\/h3\u003e\n\u003cp\u003eUse this bundle for routine maintenance, quick touch-ups, or when you need a clean car without the time or equipment for a full wash. It’s not a substitute for paint correction—scratches, heavy swirls, and stuck-on contaminants require decontamination and polishing beforehand.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBest for light to moderate dirt: dust, pollen, fingerprints, fresh road film\u003c\/li\u003e\n  \u003cli\u003eNot recommended for heavy mud, tar, or bug encrustations without prior cleaning\u003c\/li\u003e\n  \u003cli\u003eApply on cool surfaces out of direct sunlight for optimal results\u003c\/li\u003e\n  \u003cli\u003ePerfect as a maintenance topper between professional details\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the included microfiber towels improve results?\u003c\/h3\u003e\n\u003cp\u003eThe three Chemical Guys microfiber towels are selected to provide safe, effective lifting and buffing for both exterior and interior tasks. Their plush, low-scratch weave traps loosened grime and polishes surfaces to a streak-free sheen without abrasives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne towel for initial wipe, one for buffing, one reserved for interiors\u003c\/li\u003e\n  \u003cli\u003eHigh-absorbency fibers reduce drag and decrease chance of marring\u003c\/li\u003e\n  \u003cli\u003eMachine washable and reusable for multiple detailing sessions\u003c\/li\u003e\n  \u003cli\u003eDesigned to work with both Raging Rhino and Total Interior Cleaner\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Chemical Guys kit is geared toward car owners, apartment dwellers, and busy enthusiasts who want a fast, waterless maintenance option that protects surfaces while keeping a vehicle presentable between full details. It suits people with lightly soiled cars, those who already use sealants or ceramic coatings, and anyone seeking a compact, professional-grade solution to refresh both exterior and cabin without specialized equipment.\u003c\/p\u003e\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003ewaterless wash, quick detailer, drying aid, and spray wax\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Raging Rhino on ceramic-coated paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—Raging Rhino is compatible with existing ceramic coatings, sealants, and waxes and can be used as a maintenance topper.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit remove heavy bug splatter or tar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this kit is for light to moderate dirt. Heavy bugs, tar, or mud need a pre-wash or specialized cleaners first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Chemical Guys","offers":[{"title":"Default Title","offer_id":67584870252729,"sku":"B0GK2RL84R","price":175.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/chemical-guys-raging-rhino-front-packaging.jpg?v=1790457080"},{"product_id":"carpro-reset-concentrated-high-foaming-car-wash-shampoo-4-l-jug-safe-for-ceramic-coatings-sealants","title":"CARPRO Reset concentrated high-foaming car wash shampoo — 4 L jug, safe for ceramic coatings \u0026 sealants","description":"\u003cp\u003e\u003cstrong\u003eCARPRO Reset is a concentrated, high‑foaming car wash shampoo designed to safely remove road grime while protecting paint sealants and ceramic coatings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered as a companion to CARPRO’s nanotechnology sealants and coatings, Reset balances strong cleaning power with surface safety. It lifts dirt, oils and traffic film using an alkaline‑strength formula that rinses clean while remaining gentle enough to preserve protective layers like CQUARTZ, Reload and HydroO2. The 4‑liter jug supplies professional and enthusiast detailers with long‑lasting dilution options, a fresh scent, and excellent lubrication for scratch‑minimized washing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Reset clean without harming ceramic coatings or sealants?\u003c\/h3\u003e\n\u003cp\u003eReset combines effective cleaners with surfactants that break bond between contaminants and coated paint, allowing them to rinse away without aggressive abrasion. Its formulation avoids harsh sulfates and corrosive builders common in conventional shampoos.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlkaline cleaning strength to dissolve road film and light oils\u003c\/li\u003e\n  \u003cli\u003eMild, pH‑neutral rinse profile to preserve hydrophobic layers\u003c\/li\u003e\n  \u003cli\u003eBiodegradable, primarily organic ingredients that reduce film residue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat dilution and usage deliver the best results?\u003c\/h3\u003e\n\u003cp\u003eReset is highly concentrated—typically diluted between 400:1 and 500:1—so a little goes a long way. Mix according to the soil level: lighter washing needs higher dilution, heavy contamination benefits from a stronger mix before a two‑bucket wash.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLight maintenance: follow the upper end of the dilution range for spot cleaning\u003c\/li\u003e\n  \u003cli\u003eRoutine full‑vehicle wash: use recommended concentrations for balanced cleaning and protection\u003c\/li\u003e\n  \u003cli\u003eHeavier grime: slightly richer solution for pre‑wash or foam‑gun applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Reset improve the washing experience for detailers and enthusiasts?\u003c\/h3\u003e\n\u003cp\u003eBeyond cleaning, Reset offers excellent lubrication to reduce swirl risk during mitt contact and produces a dense foam that helps track coverage. Its fresh scent and economical yield reduce product waste and make repeated use pleasant for both pros and hobbyists.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick foaming action for easy visual coverage and dwell time\u003c\/li\u003e\n  \u003cli\u003eSuperior glide reduces friction and surface marring\u003c\/li\u003e\n  \u003cli\u003eLarge 4 L container for fewer refills and lower cost per wash\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan Reset be used on all exterior surfaces?\u003c\/h3\u003e\n\u003cp\u003eReset is formulated primarily for painted surfaces protected by sealants and coatings, but it is safe for most exterior finishes when used as directed. Avoid direct application on matte‑finish paint unless the manufacturer recommends soap products.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for coated and sealed paintwork when diluted correctly\u003c\/li\u003e\n  \u003cli\u003eSuitable for glass, wheels, and trim when rinsed thoroughly\u003c\/li\u003e\n  \u003cli\u003eTest inconspicuous areas for specialty or delicate finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: CARPRO Reset 4 L is aimed at automotive detailers, ceramic coating professionals, and car enthusiasts who prioritize protection and longevity of their protective layers. If you use CARPRO coatings like CQUARTZ, Reload or HydroO2—or if you simply want a concentrated, biodegradable shampoo that balances cleaning power with surface safety—Reset gives you an economical, high‑foaming solution built for repeated use on treated vehicles.\u003c\/p\u003e\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eCARPRO Reset - Intensive Car Wash\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is CARPRO Reset safe on ceramic coatings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Reset is formulated to clean effectively while preserving CARPRO coatings when diluted and used as directed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What dilution ratio should I use for routine washes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use the high dilution range around 400–500:1 for regular maintenance; increase concentration for heavier grime.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CARPRO","offers":[{"title":"Default Title","offer_id":67584879198393,"sku":"B07YQ8S4T1","price":269.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/carpro-reset-front-4l-bottle.jpg?v=1790457353"},{"product_id":"gyeon-wet-coat-spray-on-hydrophobic-gloss-coating-4000ml-instant-water-beading-rinse-off-maintenance","title":"Gyeon Wet Coat spray-on hydrophobic gloss coating 4000ml — instant water beading \u0026 rinse-off maintenance","description":"\u003cp\u003e\u003cstrong\u003eGYEON Wet Coat is a spray-on, rinse-off hydrophobic gloss coating designed to boost water beading and instant shine across all exterior vehicle surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered for quick application and maintenance, this 4000ml GYEON Wet Coat delivers ceramic-grade repellency and gloss without lengthy curing times. Use it after washing to refresh and protect paint, glass, wheels and plastics — extending the life and performance of existing ceramic coatings while creating an attractive wet-look finish.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will I see water repellency after using Wet Coat?\u003c\/h3\u003e\n\u003cp\u003eResults are immediate: spray on the wet panel, rinse and you should see improved water beading and fast runoff right away. The formula bonds quickly to damp surfaces so the protective and aesthetic effects appear as soon as the product is rinsed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply 2–3 spritzes per panel on a wet surface.\u003c\/li\u003e\n  \u003cli\u003eRinse immediately to activate hydrophobic properties.\u003c\/li\u003e\n  \u003cli\u003eVisible water beading and faster sheeting after the rinse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich exterior parts of my car can I treat with this spray?\u003c\/h3\u003e\n\u003cp\u003eGYEON Wet Coat is formulated for universal exterior use — it’s safe on painted panels, glass, wheels and exterior plastics. That makes it a convenient all-in-one maintenance step after washing the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePaint: restores gloss and enhances existing coatings.\u003c\/li\u003e\n  \u003cli\u003eGlass: improves visibility by promoting water runoff.\u003c\/li\u003e\n  \u003cli\u003eWheels and plastics: reduces contamination cling and eases cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply Wet Coat correctly to avoid streaks or streaking?\u003c\/h3\u003e\n\u003cp\u003eLess is more: apply a few light spritzes onto a wet panel and rinse off immediately, keeping the vehicle surface wet throughout the process. Over-application can cause streaking, so follow the recommended low-dose method for uniform coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStart with a freshly washed, still-wet car.\u003c\/li\u003e\n  \u003cli\u003eSpray 2–3 short bursts per panel, then rinse right away.\u003c\/li\u003e\n  \u003cli\u003eKeep rinsing frequently and don’t allow panels to dry before rinsing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan Wet Coat maintain or replace my existing ceramic coating?\u003c\/h3\u003e\n\u003cp\u003eWet Coat is designed as a maintenance booster rather than a full replacement for long-term ceramic coatings. It refreshes and prolongs performance between professional reapplications, keeping hydrophobic effects and gloss at a high level.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtends durability and water beading of current ceramic layers.\u003c\/li\u003e\n  \u003cli\u003eIdeal for routine upkeep after washing sessions.\u003c\/li\u003e\n  \u003cli\u003eNot intended as a one-time substitute for a permanent ceramic cure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: GYEON Wet Coat 4000ml suits car owners and detailers seeking a fast, reliable way to top up gloss and water repellency after each wash. It’s especially useful for vehicles already protected by ceramic coatings that need regular maintenance to keep optimal hydrophobic performance. If you want quick application, immediate visual improvement, and easier drying with enhanced beading across paint, glass, wheels and plastics, this spray-on rinse-off solution is made for that job.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Wet Coat on matte paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Avoid using Wet Coat on untreated matte finishes; test a small area first, as it can add gloss not suited to matte surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I apply Wet Coat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Apply after each wash or whenever you want to refresh hydrophobic properties; frequency depends on exposure and driving conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gyeon","offers":[{"title":"Default Title","offer_id":67584881721529,"sku":"B01FVEZNSI","price":238.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gyeon-wet-coat-front-packaging-4000ml.jpg?v=1790457516"},{"product_id":"sunsoul-cordless-portable-car-washer-with-2-batteries-30-level-adjustable-handheld-washer-brushless-motor-foam-cannon","title":"SUNSOUL Cordless Portable Car Washer with 2 Batteries — 30-Level Adjustable Handheld Washer, Brushless Motor \u0026 Foam Cannon","description":"\u003cstrong\u003eThe SUNSOUL Cordless Portable Car Washer is a lightweight, battery-powered pressure washer with dual 21V batteries, a 6-in-1 nozzle, and a foam cannon for versatile outdoor cleaning.\u003c\/strong\u003e\n\n\u003cp\u003eCompact and designed for mobility, this handheld washer combines a brushless motor, a 23-foot supply hose with filter, and a complete accessory kit to handle cars, decks, patios, bikes, boats, and more without being tethered to an outlet. Two rechargeable batteries extend runtime and a 30-level adjustable trigger lets you fine-tune pressure for delicate surfaces or tougher grime.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this washer deliver cleaning power without an outlet?\u003c\/h3\u003e\n\u003cp\u003eThe unit uses a high-efficiency brushless motor paired with two 21V rechargeable batteries that together deliver up to 2.2 GPM water flow. Its cordless design means you can work where an electrical outlet isn't available while still getting effective rinsing and soaping performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrushless motor for sustained water flow and longer motor life\u003c\/li\u003e\n  \u003cli\u003eTwo batteries included for extended runtime and quick swap\u003c\/li\u003e\n  \u003cli\u003ePull-trigger activation and 30-level pressure adjustment for control\u003c\/li\u003e\n  \u003cli\u003eBattery level indicator to monitor remaining charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat cleaning tasks can it handle around my home and vehicle?\u003c\/h3\u003e\n\u003cp\u003eThis portable washer tackles routine outdoor cleaning jobs—from car exteriors and wheels to patios, garden furniture, and RVs. The included foam cannon and six nozzle modes let you shift between gentle rinses and concentrated jets depending on the surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFoam cannon creates thick soap coverage for pre-wash loosening of dirt\u003c\/li\u003e\n  \u003cli\u003e6-in-1 rotating nozzle: 0°, 15°, 25°, 40°, jet, and shower modes\u003c\/li\u003e\n  \u003cli\u003eEffective on mud, grime, dust, and light stains without harsh scrubbing\u003c\/li\u003e\n  \u003cli\u003eSuitable for vehicles, decks, fences, boats, windows, and driveways\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere does the washer get water and how does it stay debris-free?\u003c\/h3\u003e\n\u003cp\u003eThe unit can draw water from multiple sources—bucket, faucet, pool, lake, or garden hose—using the supplied adapters and connectors. A weighted filter on the 23-foot hose keeps out leaves and grit, and the on-device shut-off valve gives instant flow control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e23 ft flexible hose with weighted filter for steady suction\u003c\/li\u003e\n  \u003cli\u003eAdapters included for faucets, hoses, bottles, and open-water use\u003c\/li\u003e\n  \u003cli\u003eShut-off valve at the unit for quick flow adjustments\u003c\/li\u003e\n  \u003cli\u003eFilter prevents pump-clogging debris for safer operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories and conveniences come in the package?\u003c\/h3\u003e\n\u003cp\u003eThe SUNSOUL washer ships with a full accessory kit and a compact tool case so everything stays organized for storage or transport. Lightweight at roughly 3 lbs, the unit is built for portability and easy handling during longer cleaning sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 21V batteries, charger, and a battery-level indicator\u003c\/li\u003e\n  \u003cli\u003eFoam cannon, 6-in-1 nozzle, glove, and hex wrench\u003c\/li\u003e\n  \u003cli\u003e23 ft hose, water filter, adapters, stop valve, and hose clip\u003c\/li\u003e\n  \u003cli\u003eCompact carrying case to keep parts protected and portable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The SUNSOUL Cordless Portable Car Washer is ideal for homeowners, car enthusiasts, RV and boat owners, gardeners, and anyone who needs a portable, no-outlet cleaning solution. It fits users who want adjustable pressure for delicate surfaces alongside the power for tougher outdoor jobs, plus the convenience of multi-source water options and a complete accessory kit for immediate use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do the batteries last per charge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: With two included 21V batteries, expect up to about 50 minutes of combined runtime depending on pressure settings and usage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it pull water from a bucket or lake?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The washer uses adapters and a 23 ft hose with a weighted filter to draw water from buckets, pools, lakes, or garden hoses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SUNSOUL","offers":[{"title":"Default Title","offer_id":67584887947449,"sku":"B0H3P2PG82","price":206.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/sunsoul-front-view-washer.jpg?v=1790457702"},{"product_id":"diy-detail-incredible-suds-t2-car-wash-shampoo-128oz-ph-neutral-high-foaming-safe-wash","title":"diy detail Incredible Suds T2 Car Wash Shampoo 128oz — pH-Neutral, High-Foaming Safe Wash","description":"\u003cp\u003e\u003cstrong\u003eDIY Detail Incredible Suds T2 is a concentrated, pH-neutral car wash shampoo that creates rich, clingy foam for safe, effective cleaning by hand or with a foam cannon.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis advanced Type 2 formula was redesigned to be thinner and slicker than the original Incredible Suds, delivering a creamy lather that lifts road grime, bird droppings, and everyday dirt without stripping wax or harming paintwork. It balances cleaning power with finish protection so you can achieve a thorough wash while preserving waxes and ceramic layers when used as directed.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Incredible Suds T2 clean without damaging paint?\u003c\/h3\u003e\n\u003cp\u003eIncredible Suds T2 uses a pH-neutral blend of surfactants and emulsifiers that remove contaminants while remaining gentle on finishes. The lubricity helps reduce friction during manual washing, lowering the risk of swirl marks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003epH-neutral chemistry designed to protect wax and sealants\u003c\/li\u003e\n  \u003cli\u003eSlick texture to minimize scrubbing abrasion\u003c\/li\u003e\n  \u003cli\u003eEffective detergents break up oils and road film\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this shampoo with both a bucket and a foam cannon?\u003c\/h3\u003e\n\u003cp\u003eYes—formulated for flexibility, Incredible Suds T2 works well for traditional two-bucket hand washes and in foam-producing machines. Dilution guidelines let you dial foam thickness and cleaning strength to match your equipment and soil level.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBucket wash: 1\/2–1 oz per wash bucket\u003c\/li\u003e\n  \u003cli\u003eFoam cannon: mix 1 oz with 31 oz water, adjust to preference\u003c\/li\u003e\n  \u003cli\u003eConcentrated bottle stretches for many washes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it rinse easily and leave residue behind?\u003c\/h3\u003e\n\u003cp\u003eThe updated formula rinses more cleanly than earlier versions, thanks to improved emulsifiers that release dirt and soap from the surface. That means less residue and a faster, more uniform rinse when using a hose or pressure washer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThin, slick solution that breaks free under rinsing pressure\u003c\/li\u003e\n  \u003cli\u003eReduces soap film so drying is quicker and streaks are minimized\u003c\/li\u003e\n  \u003cli\u003eCompatible with post-wash drying aids and blowers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow concentrated is the 128oz size and how long will it last?\u003c\/h3\u003e\n\u003cp\u003eThe 128oz jug is a concentrated detailing-grade shampoo built to last through many washes. Small measured doses deliver full cleaning performance, making the large bottle a cost-effective option for enthusiasts or professional detailers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh concentration: a little product per wash goes a long way\u003c\/li\u003e\n  \u003cli\u003e128oz supply reduces reorder frequency for busy shops\u003c\/li\u003e\n  \u003cli\u003eSuitable for frequent seasonal use or fleet care\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: DIY Detail Incredible Suds T2 is aimed at car owners and detailers who want a high-foaming, paint-safe wash that’s versatile enough for both home buckets and foam guns. It’s ideal for enthusiasts protecting wax and ceramic coatings, professional detailers needing a dependable concentrate, and anyone who prefers a slick, easy-rinsing shampoo that reduces wash time while preserving finish quality.\u003c\/p\u003e\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eliquid\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Incredible Suds T2 safe for ceramic-coated cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its pH-neutral formula is designed to clean without stripping ceramic coatings when used per dilution instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What dilution should I use for a foam cannon?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Start with 1 oz of product per 31 oz of water and adjust for foam thickness and soil level.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"diy detail","offers":[{"title":"Default Title","offer_id":67584888176825,"sku":"B0CGL344NM","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/diy-detail-incredible-suds-t2-front-label-128oz.jpg?v=1790457720"},{"product_id":"gtechniq-exo-crystal-ultra-hydrophobic-coating-1-7-fl-oz-concentrated-ceramic-style-protection-high-gloss","title":"Gtechniq EXO Crystal Ultra Hydrophobic Coating — 1.7 fl oz, Concentrated Ceramic‑Style Protection \u0026 High Gloss","description":"\u003cp\u003e\u003cstrong\u003eGtechniq EXO Crystal Ultra is a concentrated liquid ceramic-style coating that creates a high-gloss, ultra-hydrophobic barrier to repel water, dirt and road grime from painted surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for car enthusiasts and professional detailers, this 1.7 fl oz bottle of EXO provides a long-lasting protective layer that chemically bonds with automotive paint rather than merely sitting on top like waxes. The formulation flashes slowly, making application forgiving while delivering a slick finish that resists salt, contaminants and frequent washing. Because it bonds at a molecular level, EXO aims to improve beading, ease cleaning and preserve gloss between maintenance sessions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does EXO improve water beading and drying times?\u003c\/h3\u003e\n\u003cp\u003eEXO forms an extremely hydrophobic layer on the paint, forcing water into tight beads that roll off quickly, taking loose dirt with them. Faster drying also reduces swirl marks and spots, simplifying routine car care.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced hydrophobic chemistry forces water into small beads\u003c\/li\u003e\n  \u003cli\u003eReduces surface tension to speed up air drying and towel-drying\u003c\/li\u003e\n  \u003cli\u003eHelps dislodge light contaminants during rinsing\u003c\/li\u003e\n  \u003cli\u003eMaintain beading with gentle washes and periodic top-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes EXO more durable than wax or conventional sealants?\u003c\/h3\u003e\n\u003cp\u003eUnlike traditional products that rest on the paint film, EXO chemically bonds to the paint and clearcoat, producing a more resilient barrier. This bond improves resistance to mechanical abrasion and common road chemicals, extending protection between reapplications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMolecular bonding vs. surface-level protection of waxes\u003c\/li\u003e\n  \u003cli\u003eHigher resistance to road salt, grime and light abrasion\u003c\/li\u003e\n  \u003cli\u003eRetains gloss longer under regular driving conditions\u003c\/li\u003e\n  \u003cli\u003eSmall 1.7 fl oz bottle suitable for multiple panel applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs EXO difficult or time-consuming to apply?\u003c\/h3\u003e\n\u003cp\u003eApplication is straightforward: wipe on and buff off. EXO V4’s slower flash-off time gives you extra working seconds to level the coating for a flawless finish, making it suitable for advanced amateurs and pros alike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply with included applicator or a microfiber applicator pad\u003c\/li\u003e\n  \u003cli\u003eWipe on in panels, allow brief flash-off, then buff to shine\u003c\/li\u003e\n  \u003cli\u003eSlow flash-off reduces streaking and application errors\u003c\/li\u003e\n  \u003cli\u003eSmall bottle size is easy to handle for precision work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain surfaces treated with EXO?\u003c\/h3\u003e\n\u003cp\u003eTo prolong EXO’s performance, use pH-neutral shampoos, avoid aggressive brushes and dry with a clean microfiber towel. Periodic light maintenance or reapplication will restore maximal hydrophobicity and sheen.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWash with gentle, pH-neutral car shampoo\u003c\/li\u003e\n  \u003cli\u003eUse two-bucket wash method to minimize abrasion\u003c\/li\u003e\n  \u003cli\u003eTop up protection after heavy exposure to salt or chemicals\u003c\/li\u003e\n  \u003cli\u003eStore bottle in a cool, dry place away from direct sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Gtechniq EXO Crystal Ultra Hydrophobic Coating is ideal for car owners and detailers who want a compact, high-performance coating that delivers strong water repellency, enhanced gloss and extended protection without the complexity of multi-step ceramic kits. Its forgiving application suits experienced DIYers and professionals who need reliable results on paintwork, trim and topcoats. Choose EXO if you want an advanced, molecularly bonding finish from a trusted UK-based nano-technology company with decades of detailing pedigree.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does one 1.7 fl oz bottle last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typical coverage is several small to medium sections of a car; usage varies with application thickness but one bottle often treats multiple panels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can EXO be applied over wax or polish?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For best bonding, remove existing waxes or sealants and fully decontaminate and dry the paint before applying EXO.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gtechniq","offers":[{"title":"Default Title","offer_id":67584891093177,"sku":"B0758GZX2R","price":229.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gtechniq-exo-front-bottle.jpg?v=1790457851"},{"product_id":"gtechniq-exov5-ceramic-hydrophobic-coating-1-fl-oz-glossy-water-shedding-paint-protection","title":"Gtechniq EXOv5 Ceramic Hydrophobic Coating 1 fl oz — Glossy, Water‑Shedding Paint Protection","description":"\u003cp\u003e\u003cstrong\u003eGtechniq EXOv5 Crystal Hydrophobic Coating is a small-but-powerful liquid ceramic formula that bonds to paint to deliver a glossy, water-shedding protective layer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for car enthusiasts and detailers, EXOv5 (1 fl oz) is a concentrated hydrophobic coating engineered to chemically attach to automotive paint and clear coat. Unlike topical waxes and conventional sealants that simply sit on the surface, this nanotechnology-based solution forms a resilient, slick film that improves gloss, repels road grime, and helps water bead and run off. The compact bottle is ideal for spot treatments, test panels, or finishing work after polishing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does EXOv5 improve a vehicle's finish?\u003c\/h3\u003e\n\u003cp\u003eEXOv5 creates a thin, durable layer that enhances surface gloss and reduces how much dirt and water cling to paintwork. The coating visually deepens color and makes washing easier by lowering adhesion of contaminants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChemically bonds with paint for long-lasting adhesion\u003c\/li\u003e\n  \u003cli\u003eProduces a high-gloss, slick surface that boosts shine\u003c\/li\u003e\n  \u003cli\u003eReduces surface friction so water beads and sheets away\u003c\/li\u003e\n  \u003cli\u003eResists road salt and common environmental deposits better than wax\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the best way to apply this 1 fl oz bottle?\u003c\/h3\u003e\n\u003cp\u003eApplication is straightforward but benefits from a clean, cool surface and careful wiping. Work in small panels, allow the product a short dwell, then buff to a clear, glossy finish for the best result.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWash and decontaminate paint first; follow with a light polish if needed\u003c\/li\u003e\n  \u003cli\u003eApply thinly with a microfiber applicator or soft cloth, one panel at a time\u003c\/li\u003e\n  \u003cli\u003eWait for a slow flash-off, then buff off with a clean microfiber towel\u003c\/li\u003e\n  \u003cli\u003eUse the small bottle for spot corrections, layered protection, or sample testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is Gtechniq EXOv5?\u003c\/h3\u003e\n\u003cp\u003eWhile longevity depends on conditions and maintenance, EXOv5 is formulated for improved durability over waxes and many polymer sealants. It stands up well to regular washing and offers enhanced resistance to salt and pollutants when maintained properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNanotech formulation bonds to clear coat for extended wear\u003c\/li\u003e\n  \u003cli\u003eImproved resistance to road salt and environmental fallout compared to traditional wax\u003c\/li\u003e\n  \u003cli\u003ePerforms best when topped with routine washes and careful drying\u003c\/li\u003e\n  \u003cli\u003eSmall-volume bottle is suitable for reapplication or layering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces can EXOv5 be used on and are there any precautions?\u003c\/h3\u003e\n\u003cp\u003eEXOv5 is intended for painted automotive surfaces and clear coats; avoid use on plastic trim, glass, or untested materials unless manufacturer guidance is followed. Test a discreet spot first and protect adjacent trim or decals during application.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended for clear coat and painted panels only\u003c\/li\u003e\n  \u003cli\u003eAvoid freshly painted surfaces until fully cured as per paint manufacturer\u003c\/li\u003e\n  \u003cli\u003eDo not apply in direct sunlight or on hot panels to prevent uneven curing\u003c\/li\u003e\n  \u003cli\u003eUse gloves and work in a ventilated area; store upright and capped\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Gtechniq EXOv5 1 fl oz is aimed at detailers, car owners who prefer DIY maintenance, and professionals needing a precise, high-performance hydrophobic boost. It's perfect for anyone wanting to trial Gtechniq's nanotechnology on a panel, maintain high-gloss show cars, or add a top-up layer between full coatings — especially where space, control, and product economy matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can EXOv5 be layered over wax or sealant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, EXOv5 bonds to clear coats; remove loose wax first. Applying over residual sealants may reduce adhesion—clean thoroughly for best results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before rain can I expect after application?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Allow at least one hour of curing in cool conditions; avoid heavy rain for 24 hours for optimal bond and hydrophobic performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gtechniq","offers":[{"title":"Default Title","offer_id":67584891125945,"sku":"B07C4JQQ26","price":167.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gtechniq-exov5-front-bottle.jpg?v=1790457851"},{"product_id":"maxima-sc1-clair-silicone-spray-340g-water-resistant-gloss-for-plastics-paint","title":"Maxima SC1 Clair Silicone Spray 340g — Water-Resistant Gloss for Plastics \u0026 Paint","description":"\u003cp\u003e\u003cstrong\u003eMaxima SC1 Clair is a silicone-based spray coat that restores shine and creates a water-resistant, long-lasting luster on plastics, fiberglass and painted surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for motorcycles, ATVs and other powersports equipment, this 340g aerosol delivers an easy-to-apply protective finish that repels water and helps dirt slide off fenders and bodywork. The formula dries to a non-greasy sheen, renews faded colors, and leaves a fresh scent. It’s engineered to simplify cleanup after rides and to visually refresh surfaces without altering fit or flexibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow does SC1 Clair protect plastic and painted surfaces?\u003c\/h3\u003e\n\u003cp\u003eSC1 Clair lays down a thin silicone film that sheds water and reduces surface friction so mud and grime won’t cling as tightly. The coating does not stay wet or tacky; it cures to a dry, glossy finish that helps routine washing remove contaminants faster.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates a hydrophobic surface that beads and runs off water\u003c\/li\u003e\n  \u003cli\u003eForms a non-greasy, high-gloss layer that resists light soiling\u003c\/li\u003e\n  \u003cli\u003eCompatible with plastics, fiberglass and most factory paint finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill using this spray change the look or fit of parts on my bike or ATV?\u003c\/h3\u003e\n\u003cp\u003eNo bulky residue or rubberizing effect is left behind — the product is designed to enhance visual depth without altering tolerances or flex points. It restores factory color and sheen while maintaining the original surface feel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores faded color and improves gloss without swelling surfaces\u003c\/li\u003e\n  \u003cli\u003eDries quickly to avoid attracting dust or grime\u003c\/li\u003e\n  \u003cli\u003eSafe for trim and fairings when used as directed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I apply Maxima SC1 Clair for best results?\u003c\/h3\u003e\n\u003cp\u003eClean the area first to remove heavy dirt and oils; shake the can thoroughly and spray from a moderate distance in even passes. Wipe or buff lightly if needed to spread the film and avoid pooling near seams or vent openings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks best on dry, pre-cleaned surfaces\u003c\/li\u003e\n  \u003cli\u003eShake can well and spray in sweeping motions from 20–30 cm (8–12 inches)\u003c\/li\u003e\n  \u003cli\u003eAllow to dry to a clear, non-tacky finish; wipe excess with a microfiber cloth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there safety or compatibility considerations I should know?\u003c\/h3\u003e\n\u003cp\u003eThe aerosol is flammable and should be kept away from open flames, sparks and hot engine parts. Test on an inconspicuous area if you are unsure about compatibility with aftermarket coatings or decals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlammable — keep away from ignition sources and store cool\u003c\/li\u003e\n  \u003cli\u003eAvoid spraying on hot or running engines and electrical components\u003c\/li\u003e\n  \u003cli\u003eTest spot before treating specialty finishes or colored decals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Maxima SC1 Clair is ideal for riders, mechanics and powersports enthusiasts who want a quick, shop-friendly way to revive and protect plastics, fiberglass and painted bodywork. Choose it if you need a fast-drying, water-resistant finish that improves appearance and reduces cleaning time after trail or road use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Maxima SC1 Clair be used on helmets and visors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It can be used on helmet shells but avoid clear visors or anti-fog treatments; test a small area first to ensure no optical distortion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I reapply the spray?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Reapply after heavy rides or washes; frequency depends on exposure, typically every few weeks for regular use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Maxima","offers":[{"title":"Default Title","offer_id":67584894369977,"sku":"B00WU0BHUA","price":295.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/maxima-sc1-clair-front-can.jpg?v=1790458010"},{"product_id":"kochchemie-p6-02-one-polishing-compound-1l-one-step-p2000-cut-high-gloss-seal","title":"KOCHCHEMIE P6.02 ONE Polishing Compound 1L — One-Step P2000+ Cut \u0026 High-Gloss Seal","description":"\u003cp\u003e\u003cstrong\u003eKOCHCHEMIE P6.02 ONE is a one-step machine polishing compound that removes P2000+ scratches while leaving a durable, high-gloss seal.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for workshop pros and careful car owners, this 1-liter polishing compound blends cutting power with sealant properties so you can correct paint defects and restore shine in a single operation. Formulated with carnauba wax and non-volatile silicones, P6.02 ONE is optimized for rotary and dual-action polishers and is safe on automotive paintwork — not on painted plastics or rubber. It targets grit marks, light scratches and grinding defects without the need for multi-stage compounds or separate sealers.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this polish remove sanding marks and scratches?\u003c\/h3\u003e\n\u003cp\u003eP6.02 ONE is engineered as a single-step solution that efficiently eliminates sanding and polishing marks from a grit size of P2000 and finer. It balances abrasive particles with fillers and polishing oils to clear defects while refining the finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks on P2000 or finer sanding marks and light swirl marks.\u003c\/li\u003e\n  \u003cli\u003eRemoves common polishing defects in one machine pass when used correctly.\u003c\/li\u003e\n  \u003cli\u003eFormulated to minimize heat and dust during mechanical polishing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it leave a lasting high-gloss finish and protection?\u003c\/h3\u003e\n\u003cp\u003eYes — the formula contains carnauba wax plus non-volatile silicones that bond to the paint surface, giving immediate gloss and a short-term sealing effect. While it improves appearance and hydrophobicity, long-term protection should be achieved with a dedicated sealant or wax topping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivers brilliant wet-look gloss straight from the polisher.\u003c\/li\u003e\n  \u003cli\u003eNon-volatile silicones add temporary fill and water beading.\u003c\/li\u003e\n  \u003cli\u003eCompatible as a base before applying long-lasting ceramic or polymer sealants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich machines, pads and surfaces are best for P6.02 ONE?\u003c\/h3\u003e\n\u003cp\u003eUse this compound with rotary or dual-action polishers for controlled cutting and finishing. Choose medium to soft foam pads to balance abrasion and surface refinement; firmer pads increase cut but may raise heat and risk on thin clearcoats.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with rotary and DA polishers — adjust speed to panel condition.\u003c\/li\u003e\n  \u003cli\u003eRecommended pads: medium cutting foam to soft finishing foam.\u003c\/li\u003e\n  \u003cli\u003eSafe on automotive paint, commercial vehicles and motorcycles; avoid painted plastics and rubber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply P6.02 ONE for best results?\u003c\/h3\u003e\n\u003cp\u003eStart on a clean, dry surface and test on an inconspicuous area to confirm cut level. Apply a few pea-sized drops to the pad, spread at low speed, then increase speed for short, overlapping passes until defects are removed and the gloss appears. Wipe residue with a clean microfiber and inspect under good light.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTest patch first to verify compatibility and cut-intensity.\u003c\/li\u003e\n  \u003cli\u003eUse controlled pressure, short passes and inspect frequently.\u003c\/li\u003e\n  \u003cli\u003eRemove residue with a soft microfiber towel; follow with a long-term sealer if desired.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: KOCHCHEMIE P6.02 ONE is aimed at professional detailers, bodyshop technicians and advanced DIYers who need a reliable one-step polish to correct fine sanding marks and light scratches while producing a showroom gloss. If you require multi-stage compounding for deep scratches, or need products safe on painted plastics, choose a different dedicated product or follow with compatible plastic-safe treatments. For clearcoat paint on cars, trucks and motorcycles where speed, consistent results and a sealing boost matter, P6.02 ONE delivers a practical, workshop-grade solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use P6.02 ONE on plastic bumpers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. P6.02 ONE is formulated for painted metal panels and clearcoats, not painted plastics or rubber.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a separate sealer after polishing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It gives a temporary sealing effect, but for long-term protection use a dedicated sealant or wax afterward.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KOCHCHEMIE","offers":[{"title":"Default Title","offer_id":67584895779001,"sku":"B0DC8CG2D2","price":200.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kochchemie-p6-02-one-front-bottle.jpg?v=1790458102"},{"product_id":"chemical-guys-carbon-force-ceramic-paint-coating-kit-1-oz-3-applicators-sio2-hydrophobic-protection","title":"Chemical Guys Carbon Force Ceramic Paint Coating Kit — 1 oz, 3 Applicators, SiO2 Hydrophobic Protection","description":"\u003cstrong\u003eCarbon Force Ceramic Paint Coating Kit by Chemical Guys is a professional-grade SiO2 ceramic coating that creates a durable, hydrophobic protective layer and high-gloss finish for exterior vehicle surfaces.\u003c\/strong\u003e\n\nCarbon Force (WAC232) uses advanced silica-based nanotechnology to bond to paint and clear coat, offering water beading, surface slickness, and long-term protection against environmental contaminants. The kit includes a 1 fl oz bottle and three microsuede applicators for accurate, even coverage. It’s formulated to be safe on paint, clear coat, headlights, chrome, and exterior trim, making it a versatile option for detailing cars, trucks, motorcycles, and boats.\n\n\u003ch3\u003eHow does Carbon Force protect my car’s paint?\u003c\/h3\u003e\n\u003cp\u003eCarbon Force forms a hard, bonded SiO2 layer on the surface that resists water, dirt, and many environmental pollutants. Rather than sitting on top like a wax, it chemically bonds to the finish to provide longer-lasting defense and easier maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates a hydrophobic barrier that sheds water and reduces staining\u003c\/li\u003e\n  \u003cli\u003eHelps block oxidation and environmental fallout\u003c\/li\u003e\n  \u003cli\u003eReduces surface contamination and makes washing simpler\u003c\/li\u003e\n  \u003cli\u003eDesigned to bond to clear coat for enhanced durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does the protection last and what maintenance is needed?\u003c\/h3\u003e\n\u003cp\u003eWith correct surface preparation and routine care, Carbon Force protection can last up to five years. Longevity depends on exposure, washing habits, and environmental conditions; periodic maintenance washes and protective top-ups can extend performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLasts up to 5 years with proper prep and care\u003c\/li\u003e\n  \u003cli\u003eRegular gentle washes preserve hydrophobic performance\u003c\/li\u003e\n  \u003cli\u003eUse pH-balanced shampoos and avoid abrasive cleaners\u003c\/li\u003e\n  \u003cli\u003eSeasonal inspections and re-coats where needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces can I apply this ceramic coating to?\u003c\/h3\u003e\n\u003cp\u003eCarbon Force is formulated for a variety of exterior surfaces including painted panels, clear coats, headlights, chrome, and trim. It’s suitable for most vehicle types, giving consistent gloss and protection across different materials when applied correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for painted surfaces and factory clear coats\u003c\/li\u003e\n  \u003cli\u003eCan be used on headlights, metal trim, and chrome accents\u003c\/li\u003e\n  \u003cli\u003eAppropriate for cars, trucks, motorcycles, and boats\u003c\/li\u003e\n  \u003cli\u003eNot intended for soft plastics or interior surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how is the kit applied?\u003c\/h3\u003e\n\u003cp\u003eThe Carbon Force kit contains a 1 fl oz bottle of ceramic coating and three microsuede applicators to help achieve smooth, even coverage. Proper application requires clean, decontaminated paint and careful, small-panel technique to avoid high spots and ensure an even bond.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 1 fl oz Carbon Force ceramic coating (WAC232)\u003c\/li\u003e\n  \u003cli\u003eThree microsuede applicators for controlled application\u003c\/li\u003e\n  \u003cli\u003eApply to fully washed, decontaminated, and corrected paint\u003c\/li\u003e\n  \u003cli\u003eWork in small sections and follow cure times per instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for? Carbon Force is aimed at enthusiasts and professional detailers who want a high-gloss, long-lasting protective coating without large-quantity product commitment. It’s ideal for vehicle owners who perform careful prep work, value enduring hydrophobic performance, and seek a compact kit to protect paint, trim, and clear surfaces. If you prefer an application that bonds to your vehicle’s finish rather than a sacrificial wax, this kit offers a concentrated, professional-style solution in a small, easy-to-handle package.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I apply Carbon Force over existing wax or sealants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. For best bonding, remove wax, sealants, and contamination with proper wash, decon, and paint correction before applying Carbon Force.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much surface area does a 1 fl oz bottle cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One ounce typically covers small-to-medium vehicles if applied sparingly; expect to work panel by panel for even coverage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Chemical Guys","offers":[{"title":"Default Title","offer_id":67584902168761,"sku":"B095J8QYKC","price":292.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/chemical-guys-carbon-force-front-bottle.jpg?v=1790458352"},{"product_id":"griots-garage-the-boss-foam-cannon-for-pressure-washers-33-8-oz-auto-mix-stainless-steel-manifold-thick-snow-foam","title":"Griot's Garage The BOSS Foam Cannon for Pressure Washers — 33.8 oz Auto‑Mix, Stainless Steel Manifold, Thick Snow Foam","description":"\u003cp\u003e\u003cstrong\u003eThe BOSS Foam Cannon from Griot's Garage is a professional-grade pressure-washer foam gun that delivers thick, clingy snow foam quickly and without pre-mixing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for detailers and enthusiasts, The BOSS transforms a standard pressure washer into a high-output foam system that covers vehicles evenly, loosens dirt, and shortens wash time. Built with a precision-machined stainless steel manifold and an Auto-Mix system, it combines durability and convenience so you can apply soap directly from concentrate bottles without manual dilution. The kit includes a 33.8 oz jar, extra metering tips, and compatibility with Griot’s Garage bottles to fit most setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow does The BOSS improve my car wash results?\u003c\/h3\u003e\n\u003cp\u003eThe BOSS lays down a dense, clinging foam that adheres to paintwork longer than a spray-only wash, helping to suspend dirt for gentler removal. Foam coverage reduces the need for aggressive scrubbing and helps deliver a more consistent clean across large surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates thick snow-foam that lifts road grime and bugs\u003c\/li\u003e\n  \u003cli\u003eClings to vertical surfaces for extended dwell time\u003c\/li\u003e\n  \u003cli\u003eReduces contact friction when rinsing and mitt-washing\u003c\/li\u003e\n  \u003cli\u003eAdjustable fan pattern for targeted or wide coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the Auto-Mix system user-friendly?\u003c\/h3\u003e\n\u003cp\u003eInstead of measuring and premixing, you screw a compatible concentrate bottle into the Auto-Mix feed and the cannon meters the correct dilution automatically. This streamlines setup, minimizes spills, and speeds up multiple passes when detailing several vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts Griot’s Garage 22 oz and 35 oz bottles plus included 33.8 oz jar\u003c\/li\u003e\n  \u003cli\u003eSimple bottle swap for different cleaners—no measuring cup needed\u003c\/li\u003e\n  \u003cli\u003eReduces waste and messy mixing at the sink or bucket\u003c\/li\u003e\n  \u003cli\u003eExtra metering tips let you fine-tune dilution for pressure and soap type\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs The BOSS durable and serviceable for frequent use?\u003c\/h3\u003e\n\u003cp\u003eThe core manifold is machined from stainless steel to resist wear from repeated use and various pressure-washer setups. Like all foam cannons, wear and particulate can affect performance over time, so The BOSS is built for easy maintenance and compatible with a rebuild kit for quick servicing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless-steel manifold for long-term corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eStainless quick-coupler plug for secure pressure-washer connection\u003c\/li\u003e\n  \u003cli\u003eIncludes spare metering tips and reservoirs to extend service intervals\u003c\/li\u003e\n  \u003cli\u003eRecommend keeping a Foam Cannon Rebuild Kit on hand for upkeep\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich pressure washers and nozzles work best with this foam cannon?\u003c\/h3\u003e\n\u003cp\u003eThe BOSS is designed to pair with both gas and electric pressure washers by changing included jets to match flow rates. The nozzle is adjustable from a concentrated 0° jet to a 40° fan, giving flexibility for tight spots or broad coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.1mm jet recommended for most gas pressure washers\u003c\/li\u003e\n  \u003cli\u003e1.25mm jet recommended for many electric units\u003c\/li\u003e\n  \u003cli\u003eAdjustable spray pattern for varied applications—truck, car, RV\u003c\/li\u003e\n  \u003cli\u003eCompatible with common quick-coupler styles, check pressure specs before use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The BOSS is aimed at enthusiasts, weekend detailers, and professional cleaners who want faster, cleaner pre-wash coverage and a robust tool that stands up to repeated use. If you value easy setup, adjustable foam output, and a durable build that accepts ready-to-use concentrate bottles, this foam cannon streamlines the wash process for small cars up to large trucks and RVs. Keep a rebuild kit nearby if you run high-frequency washes to maintain consistent foam performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can The BOSS connect to any pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits most washers with common quick-coupler styles, but check your pressure and flow specs to match the provided jets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to pre-mix soap with The BOSS?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The Auto-Mix system meters concentrate directly from compatible bottles—no pre-dilution required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Griot's Garage","offers":[{"title":"Default Title","offer_id":67584902267065,"sku":"B07F1Z22L4","price":238.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/griots-garage-boss-foam-cannon-front-view.jpg?v=1790458351"},{"product_id":"meguiars-pro-d300-da-microfiber-correction-compound-1-gal-low-dust-high-gloss-paint-correction-for-da-polishers","title":"Meguiar's Pro D300 DA Microfiber Correction Compound 1 gal — low-dust, high-gloss paint correction for DA polishers","description":"\u003cp\u003e\u003cstrong\u003eMeguiar's Pro D300 DA Microfiber Correction Compound is a concentrated, low-dust formula that quickly removes light-to-moderate scratches, swirls and oxidation while leaving a high-gloss finish when used with a DA polisher and microfiber cutting pads.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for detailers and experienced DIYers, this one-gallon correction compound uses super-micro abrasive technology engineered to correct paint defects without excessive sling or dust. It pairs specifically with dual-action polishers and Meguiar’s DA microfiber cutting discs to deliver controlled cutting power and longer working time, helping you restore factory-like clarity and gloss across OEM glossy finishes.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast will this compound remove swirl marks and light scratches?\u003c\/h3\u003e\n\u003cp\u003eIn most cases, Meguiar's D300 will noticeably reduce or eliminate swirls and light scratches after a few passes with a DA polisher and the appropriate microfiber cutting disc. The super-micro abrasive structure balances cut and finish so you spend less time refining after correction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse with a Dual Action polisher (MT300 recommended) for even results\u003c\/li\u003e\n  \u003cli\u003eApply with DA Microfiber Cutting Discs for stronger cut; Xtra Cut Discs for heavier defects\u003c\/li\u003e\n  \u003cli\u003eWork in overlapping passes at moderate speed for consistent removal\u003c\/li\u003e\n  \u003cli\u003eNo-sling formula reduces cleanup and minimizes task time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this product be safe on my car's paint and clear coat?\u003c\/h3\u003e\n\u003cp\u003eYes—Meguiar’s Pro D300 is formulated for safe use on all OEM glossy paint systems when used correctly. It’s designed to avoid excessive heat or aggressive removal that can thin clear coat, especially when paired with DA-style equipment instead of a rotary buffer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for factory glossy finishes and modern clear coats\u003c\/li\u003e\n  \u003cli\u003eMicrofiber pad compatibility minimizes holograms and compound marks\u003c\/li\u003e\n  \u003cli\u003eLonger working time lowers the risk of heat buildup during polishing\u003c\/li\u003e\n  \u003cli\u003eFollow pad, speed, and pressure recommendations to protect paint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use this compound for best results?\u003c\/h3\u003e\n\u003cp\u003eStart with a clean, dry surface and test a small panel to confirm cut vs. finish. Apply a few pea-sized drops to a DA microfiber cutting pad, spread at low speed, then work the area with moderate pressure at recommended speeds until defects diminish; finish with a lighter polishing step if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrep: wash, clay if needed, and dry the panel\u003c\/li\u003e\n  \u003cli\u003eApply: pea-sized dots on the pad, spread before increasing speed\u003c\/li\u003e\n  \u003cli\u003ePolish: overlap passes until defects reduce, then wipe residue clean\u003c\/li\u003e\n  \u003cli\u003eRefine: follow with a finishing polish or pad for maximum gloss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this gallon size useful for pros and enthusiasts?\u003c\/h3\u003e\n\u003cp\u003eThe one-gallon supply offers lower cost per vehicle and fewer refill interruptions for busy shops or detailers tackling multiple cars. Its concentrated formula means you use less product per panel while retaining workability and easy wipe-off characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBetter value for fleets, shops, and frequent detailers\u003c\/li\u003e\n  \u003cli\u003eConsistent batch for uniform results across jobs\u003c\/li\u003e\n  \u003cli\u003eReduced packaging waste compared with multiple small bottles\u003c\/li\u003e\n  \u003cli\u003eEasy to pour into smaller bottles for station use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Meguiar's Pro D300 DA Microfiber Correction Compound is aimed at professional detailers, body shops, and skilled car-care enthusiasts who use dual-action polishing systems and microfiber cutting pads. If you want a reliable, low-dusting correction compound that balances cutting power with finish quality and comes in a gallon size for frequent use, this product is designed to streamline paint correction workflows without sacrificing gloss.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use D300 on matte or satin finishes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. D300 is formulated for glossy OEM paint. Do not use on matte or satin finishes to avoid altering the intended appearance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which pad works best with this compound?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use Meguiar's DA Microfiber Cutting Discs for strong correction; Xtra Cut Discs for heavier defects and standard microfiber for lighter work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Meguiar's","offers":[{"title":"Default Title","offer_id":67584903315641,"sku":"B0055PD3G8","price":237.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/meguiars-pro-d300-front-label.jpg?v=1790458447"},{"product_id":"the-rag-company-mitt-on-a-stick-pro-60in-microfiber-wash-mop-multi-angle-head-removable-plush-cover","title":"The Rag Company Mitt on A Stick Pro+ 60in Microfiber Wash Mop — Multi‑Angle Head, Removable Plush Cover","description":"\u003cp\u003e\u003cstrong\u003eThe Rag Company Mitt on A Stick Pro+ is a 60-inch reach microfiber wash mop that secures a removable plush cover or your favorite towel to safely clean roofs, windshields, and side panels without climbing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for detailers, fleet operators, and weekend car enthusiasts, this extended-reach wash tool speeds cleaning of tall vehicles—trucks, RVs, trailers, and boats—while reducing the need for ladders or stools. The multi-angle locking head follows curved surfaces, and the towel-plug attachment lets you use either the included plush sleeve or any compatible microfiber cloth for tailored cleaning and polishing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 60-inch reach improve washing tall vehicles?\u003c\/h3\u003e\n\u003cp\u003eThe long handle extends your cleaning range so you can safely wash roofs and upper panels from the ground. That extra reach reduces ladder use and gives better control when working on large vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e60-inch total reach for roofs, windshields, and side panels\u003c\/li\u003e\n  \u003cli\u003eReduces trips up and down ladders or stools\u003c\/li\u003e\n  \u003cli\u003eMakes faster, more consistent passes over large surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the head adapt to curved panels and different cleaning angles?\u003c\/h3\u003e\n\u003cp\u003eYes—the Pro+ features a multi-angle locking head that rotates front-to-back and locks at several positions. This allows you to follow rooflines and body contours for smoother, safer strokes across SUVs, vans, boats, and aircraft surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultiple lockable angle settings for controlled passes\u003c\/li\u003e\n  \u003cli\u003eFront-to-back rotation to match panel curvature\u003c\/li\u003e\n  \u003cli\u003eStable positioning prevents unwanted head movement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat cleaning materials work with the towel plug and cover?\u003c\/h3\u003e\n\u003cp\u003eThe built-in towel plug secures the included plush sleeve or any compatible microfiber towel for a customizable cleaning setup. Swap between the plush cover for gentle lift-and-hold cleaning and high-absorbency towels for drying or finishing steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded plush cover fits over the head and plugs into place\u003c\/li\u003e\n  \u003cli\u003eWorks with most detailing microfiber towels for versatility\u003c\/li\u003e\n  \u003cli\u003eQuick-change design for efficient switching between tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I care for the removable cover and tool?\u003c\/h3\u003e\n\u003cp\u003eThe elastic sleeve detaches so you can machine wash it, keeping the surface fresh and contaminant-free. After laundering, the fabric slips back on easily so the tool is ready for the next job without performance loss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemovable sleeve is machine washable for easy maintenance\u003c\/li\u003e\n  \u003cli\u003eFast reinstallation ensures minimal downtime between jobs\u003c\/li\u003e\n  \u003cli\u003eDurable construction built for repeated professional use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Rag Company Mitt on A Stick Pro+ is ideal for professional detailers, fleet maintenance crews, RV owners, and car enthusiasts who need a safer, more efficient way to wash high or wide vehicles. If you want to reduce ladder time, maintain consistent cleaning passes across curved surfaces, and use your preferred microfiber towels, this tool offers a practical, durable solution from a trusted detailing brand.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use my own microfiber towels with this tool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The built-in towel plug secures most microfiber towels so you can use your preferred detailing cloths.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the plush cover machine washable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The elastic sleeve detaches and is safe to machine wash for easy maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"The Rag Company","offers":[{"title":"Default Title","offer_id":67584904626361,"sku":"B0FSB7P3K8","price":211.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/the-rag-company-mitt-on-a-stick-proplus-front-view.jpg?v=1790458490"},{"product_id":"mothers-mag-aluminum-polish-128-oz-concentrated-metal-polish-restores-mirror-like-shine","title":"Mothers Mag \u0026 Aluminum Polish 128 oz — Concentrated metal polish, restores mirror-like shine","description":"\u003cp\u003e\u003cstrong\u003eMothers Mag \u0026amp; Aluminum Polish is a concentrated metal polish designed to remove oxidation and restore mirror-like shine to aluminum, stainless steel, brass and other automotive metals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 128 oz concentrated formula from Mothers blends strong cutting power with a finish-friendly polish that enthusiasts and professional detailers rely on. It removes heavy oxidation, surface stains and discoloration from uncoated metal, then refines the surface to a bright, reflective finish. The product works by hand with a clean cloth or with standard polishing pads, making it flexible for single-wheel touch-ups or whole-vehicle metal restoration.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Mothers Mag \u0026amp; Aluminum Polish work on heavily oxidized wheels?\u003c\/h3\u003e\n\u003cp\u003eThe polish uses abrasives and chemical cleaners to break down and lift oxidation, then smooth and shine the metal surface. With consistent rubbing the formula exposes fresh metal underneath and polishes it to a strong luster without aggressive etching when used as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCuts through years of road grime, brake dust and oxidation\u003c\/li\u003e\n  \u003cli\u003eRestores dull or cloudy aluminum to a near-mirror finish\u003c\/li\u003e\n  \u003cli\u003eSuitable for both hand-application and machine polishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it safe for regular maintenance on trim and exhaust tips?\u003c\/h3\u003e\n\u003cp\u003eMothers Mag \u0026amp; Aluminum Polish is formulated to be tough on stains yet gentle enough for periodic upkeep. Regular, light polishing removes surface contaminants before they embed, preserving metal appearance without excessive material removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for repeated use on uncoated, unplated metal surfaces\u003c\/li\u003e\n  \u003cli\u003eRemoves surface discoloration while minimizing finish wear\u003c\/li\u003e\n  \u003cli\u003eLeaves a protective, bright surface that reduces immediate re-oxidation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s the best method and tools for applying this 128 oz size?\u003c\/h3\u003e\n\u003cp\u003eFor small spots use a clean microfiber or cotton cloth and moderate pressure; for larger areas, a foam or wool polishing pad on a rotary or dual-action polisher speeds results and evens the finish. Wipe away residue and buff to a final shine with a fresh cloth.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand-application: soft cloth, circular motions, finish with buffing cloth\u003c\/li\u003e\n  \u003cli\u003eMachine use: low-to-medium speed with appropriate polishing pad\u003c\/li\u003e\n  \u003cli\u003eRinse or wipe off excess and finish with a clean microfiber for best clarity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich metals and vehicle parts are ideal for this polish?\u003c\/h3\u003e\n\u003cp\u003eThe product targets uncoated metals commonly found on vehicles — aluminum wheels, stainless trim, exhaust tips, brass accessories and similar alloys. Avoid use on plated or coated surfaces unless compatibility has been confirmed to prevent polish damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum wheels and cast aluminum components\u003c\/li\u003e\n  \u003cli\u003eStainless steel trim, exhaust tips and hardware\u003c\/li\u003e\n  \u003cli\u003eBrass accents and other uncoated automotive metal pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Mothers Mag \u0026amp; Aluminum Polish 128 oz is meant for car enthusiasts, detail shops and DIYers who need a reliable, concentrated metal polish for larger jobs and frequent maintenance. If you restore older wheels, maintain show-quality trim, or run a detailing business, this size offers value and consistent performance. For plated or sensitive finishes, test in an inconspicuous spot first and use gentler products if needed.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Mothers Mag \u0026amp; Aluminum Polish on plated chrome?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—avoid plated or coated chrome unless manufacturer confirms compatibility; test a hidden area first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this safe to use with a dual-action polisher?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—use a foam or wool pad at low-to-medium speed and follow with a clean buffing cloth.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Mothers","offers":[{"title":"Default Title","offer_id":67584906690745,"sku":"B002ZLLCA4","price":194.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/mothers-mag-aluminum-polish-front-bottle.jpg?v=1790458582"},{"product_id":"maxl-maxlone-car-spray-waterless-detailer-kit-triphene®-2-bottle-hydrophobic-protective-shine","title":"MAXL MAXLONE Car Spray Waterless Detailer Kit — Triphene® 2‑Bottle, Hydrophobic Protective Shine","description":"\u003cp\u003e\u003cstrong\u003eMAXL MAXLONE™ Car Spray with Triphene® is a waterless all‑purpose detailer that cleans, shines, and lays down a durable hydrophobic barrier in minutes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for people who want pro‑level results without hauling hoses or spending hours, this two‑bottle kit uses Triphene® smart‑coating technology to remove dirt and leave a lasting water‑repellent finish on paint, glass, plastic, metal, and high‑heat parts. The formula is highly concentrated, safe to dilute for extra coverage, and formulated in the USA to resist UV, chemicals, and extreme temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will my vehicle look clean and glossy?\u003c\/h3\u003e\n\u003cp\u003eMost light soils and fingerprints wipe away with a single spray and microfiber pass, delivering an immediate deep gloss. The Triphene® layer enhances color depth so surfaces look freshly detailed without rubbing for extended periods.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpray and wipe application—no rinse required.\u003c\/li\u003e\n  \u003cli\u003eRemoves light dirt, dust, and finger smudges fast.\u003c\/li\u003e\n  \u003cli\u003eProduces mirror‑like shine after one pass.\u003c\/li\u003e\n  \u003cli\u003eWorks on paint, chrome, glass, and plastic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the coating hold up against weather and harsh conditions?\u003c\/h3\u003e\n\u003cp\u003eThe Triphene® chemistry forms a triple‑layer barrier that is hydrophobic and oleophobic, helping water, grime, and salts bead and roll away. It’s engineered to resist UV exposure, common chemicals, and elevated temperatures up to 600°F, making it suitable for exterior surfaces exposed to the elements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHydrophobic\/oleophobic shield reduces dirt adhesion.\u003c\/li\u003e\n  \u003cli\u003eUV and chemical resistance preserves finish integrity.\u003c\/li\u003e\n  \u003cli\u003eHeat‑tolerant for wheels, calipers, and exhausts.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce frequency of full washes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much product do I need and how is it applied?\u003c\/h3\u003e\n\u003cp\u003eThe kit is highly concentrated—only a few ounces treat an entire vehicle; you can dilute it 1:1 with deionized water to extend coverage. Application is simple: spray the product onto the surface or a microfiber towel, then wipe until the surface is clean and glossy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConcentrated formula—2 oz can treat multiple vehicles.\u003c\/li\u003e\n  \u003cli\u003eOptional 50\/50 dilution with deionized water for more coverage.\u003c\/li\u003e\n  \u003cli\u003eApply to one panel at a time for best results.\u003c\/li\u003e\n  \u003cli\u003eFinish with a dry microfiber for streak‑free shine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this safe to use on different car parts and finishes?\u003c\/h3\u003e\n\u003cp\u003eYes—the formulation is non‑toxic and safe for painted surfaces, glass, plastics, metal trim, and many high‑heat parts when used as directed. It replaces multiple specialty products by delivering protection, shine, and water repellency in a single step.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for clearcoats, painted surfaces, and wheels.\u003c\/li\u003e\n  \u003cli\u003eWorks on plastic trim and exterior metal without hazing.\u003c\/li\u003e\n  \u003cli\u003eNon‑toxic, eco‑minded formulation made in the USA.\u003c\/li\u003e\n  \u003cli\u003eFollow heat‑area precautions for very hot parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: MAXL MAXLONE™ is ideal for car owners, detailers, and enthusiasts who want professional protection and instant shine without a full wash—perfect for busy people, fleets, or anyone wanting to reduce water use and maintenance time while keeping vehicles protected against weather, road grime, and heat exposure.\u003c\/p\u003e\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eTriphene\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use MAXLONE diluted?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. MAXLONE can be diluted 50\/50 with deionized water to extend coverage without losing protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this safe on hot wheels and engine parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The formula resists temperatures up to 600°F, making it suitable for wheels, calipers, and some engine components.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MAXL","offers":[{"title":"Default Title","offer_id":67584906657977,"sku":"B0F1P4CSXN","price":238.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/maxl-maxlone-front-packaging_c324f2cb-7f06-4d39-974b-b5453a2253cd.jpg?v=1790458579"},{"product_id":"maxl-maxlone-car-spray-waterless-detailer-3-kit-triphene®-hydrophobic-protection-concentrated","title":"MAXL MAXLONE Car Spray Waterless Detailer 3-Kit — Triphene® Hydrophobic Protection, Concentrated","description":"\u003cp\u003e\u003cstrong\u003eMAXL MAXLONE™ Car Spray with Triphene® is a concentrated, waterless all-purpose detailer that instantly cleans, seals, and adds long-lasting hydrophobic protection to paint, glass, metal, and plastic.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for drivers, enthusiasts, and mobile detailers, this 3-kit supply delivers professional-level results without hoses, buckets, or harsh solvents. The Triphene® triple-layer barrier creates a hydrophobic and oleophobic finish that sheds water, dirt, and road grime while restoring deep gloss. Each kit is highly concentrated, safe for multiple surfaces, heat resistant to 600°F, and formulated for economical dilution so one bottle treats entire vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does MAXLONE™ clean without water?\u003c\/h3\u003e\n\u003cp\u003eMAXLONE™ uses a concentrated surfactant blend combined with Triphene® polymers to lift dirt safely from surfaces so it can be wiped away without scratching. The formula emulsifies contaminants, allowing microfiber towels to trap particles instead of dragging them across paint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpray directly on a panel and wait a few seconds for active lift\u003c\/li\u003e\n  \u003cli\u003eWipe with a plush microfiber, flip to a clean side to remove residue\u003c\/li\u003e\n  \u003cli\u003eFinish with a dry towel buff to enhance the hydrophobic effect\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this protect wheels, engine parts, and high-heat areas?\u003c\/h3\u003e\n\u003cp\u003eYes — the Triphene® polymer barrier in MAXLONE™ resists heat and chemicals and tolerates temperatures up to 600°F, making it suitable for wheels, calipers, exhaust tips, and exposed engine components. It bonds to surfaces to reduce brake dust and grime adhesion while preserving finish clarity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply after cooling any recently driven wheels or components\u003c\/li\u003e\n  \u003cli\u003eUse a dedicated towel for brake dust to avoid cross-contamination\u003c\/li\u003e\n  \u003cli\u003eReapply every few months depending on exposure and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does the shine and protection last, and how much do I need?\u003c\/h3\u003e\n\u003cp\u003eDurability varies with conditions, but the Triphene® barrier is formulated for months of protection rather than days, lowering reapplication frequency. Highly concentrated, a small amount covers large areas — roughly 2 oz treats a full vehicle, and you can dilute up to 50\/50 with deionized water to extend coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 oz typically covers a mid-size car when used directly\u003c\/li\u003e\n  \u003cli\u003e50\/50 dilution doubles coverage for maintenance passes\u003c\/li\u003e\n  \u003cli\u003eReapply sooner in harsh climates or after heavy chemical exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs MAXLONE™ safe for my car’s paint, trim, and glass?\u003c\/h3\u003e\n\u003cp\u003eFormulated to be non-toxic and eco-friendly, MAXLONE™ is safe for automotive paint, clear coats, plastics, metal, and glass when used as directed. It avoids aggressive acids and solvents, so it revitalizes surfaces and enhances gloss without stripping existing protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTest on an inconspicuous area if unsure about aged finishes\u003c\/li\u003e\n  \u003cli\u003eCompatible with ceramic and polymer coatings as a maintenance spray\u003c\/li\u003e\n  \u003cli\u003eSafe to use on exterior trim and lenses when wiped gently\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: MAXL MAXLONE™ Car Spray with Triphene® is for people who want pro-grade detailing results without the hassle of traditional washing — commuters, mobile detailers, collectors, and hobbyists who need fast, safe cleaning and durable protection. It’s especially useful where access to water is limited, for quick touch-ups between washes, and for anyone who prefers an eco-friendlier detailing routine that stretches a bottle’s value.\u003c\/p\u003e\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eTriphene\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I dilute MAXLONE™ and still get protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — you can dilute up to 50\/50 with deionized water for extended coverage; protection remains but may require more frequent reapplications in heavy-use conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is MAXLONE™ safe on ceramic-coated vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it's compatible as a maintenance spray and will boost gloss without stripping factory or aftermarket ceramic coatings when used correctly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MAXL","offers":[{"title":"Default Title","offer_id":67584906821817,"sku":"B0F1P5FV87","price":325.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/maxl-maxlone-front-packaging.jpg?v=1790458578"},{"product_id":"maxl-maxlone-waterless-car-detailer-gallon-kit-triphene®-hydrophobic-protection-concentrated","title":"MAXL MAXLONE Waterless Car Detailer Gallon Kit — Triphene® Hydrophobic Protection, Concentrated","description":"\u003cstrong\u003eMAXLONE™ Car Spray with Triphene® is a concentrated, waterless all-purpose detailer that cleans, shines and protects paint, glass, plastic and metal while creating a hydrophobic, oleophobic barrier.\u003c\/strong\u003e\n\u003cp\u003eDesigned for car enthusiasts, professional detailers and busy vehicle owners, this gallon kit delivers a professional-grade finish without buckets or hoses. The Triphene® advanced coating forms a multi-layer barrier that repels water, dirt and chemicals while restoring deep gloss instantly. Highly concentrated and made in the USA, it provides long-lasting protection and covers an entire vehicle with minimal product.\u003c\/p\u003e\n\n\u003ch3\u003eHow does MAXLONE™ clean vehicles without water?\u003c\/h3\u003e\n\u003cp\u003eMAXLONE™ uses a balanced blend of gentle cleaners and wetting agents to lift contaminants from painted surfaces while Triphene® encapsulates dirt for safe removal. Spray on, agitate with a microfiber, then wipe away to reveal a streak-free finish—no rinsing required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpray-and-wipe application removes dust, fingerprints and light grime.\u003c\/li\u003e\n  \u003cli\u003eSafe on clear coat; prevents scratching by encapsulating particles.\u003c\/li\u003e\n  \u003cli\u003eConcentrated formula: as little as 2 oz treats a full vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does the Triphene® barrier provide?\u003c\/h3\u003e\n\u003cp\u003eThe Triphene® layer creates a triple-action hydrophobic and oleophobic shield that reduces adhesion of water, road grime and oils. It resists UV, acids and common chemicals, extending surface longevity without repeated daily reapplications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWater and oil bead and roll off surfaces for easier maintenance.\u003c\/li\u003e\n  \u003cli\u003eResists UV fading, acid rain and road salt for longer-lasting gloss.\u003c\/li\u003e\n  \u003cli\u003eDurable under heat—safe on wheels, calipers and engine parts up to high temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan MAXLONE™ replace multiple detailing products?\u003c\/h3\u003e\n\u003cp\u003eYes—this all-purpose spray blends cleaning, gloss enhancement and protective coating into one product, cutting down on the number of bottles you need. It restores deep color and mirror-like shine while sealing surfaces with a protective layer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks on paint, glass, plastic trim and metal without cross-contamination.\u003c\/li\u003e\n  \u003cli\u003eInstant shine reduces time spent polishing and waxing.\u003c\/li\u003e\n  \u003cli\u003eConcentrate can be diluted 50\/50 with deionized water to extend coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it safe for high-heat areas and harsh environments?\u003c\/h3\u003e\n\u003cp\u003eMAXLONE™ is formulated to withstand demanding conditions—its coating tolerates elevated temperatures and aggressive elements without breaking down. That makes it suitable for wheels, exhaust tips and engine bay components where many detailers avoid lighter sprays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-resistant up to high temperatures for wheel and brake areas.\u003c\/li\u003e\n  \u003cli\u003eChemical-resistant finish repels road salts and harsh cleaners.\u003c\/li\u003e\n  \u003cli\u003eNon-toxic, low-VOC base for safer indoor and outdoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? MAXLONE™ Car Spray with Triphene® is designed for owners who want pro-level results with minimal fuss: DIY detailers, fleet managers, automotive shops and anyone who values protection, fast maintenance and high gloss without the need for hoses or elaborate equipment. If you want a single, concentrated product that cleans, protects and shines multiple surfaces while saving time and resources, this gallon kit is built for that purpose.\u003c\/p\u003e\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eTriphene\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much vehicle coverage does one gallon provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One gallon covers multiple vehicles; concentrate treats a full car with as little as 2 oz of product when used full strength, and dilution increases coverage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is MAXLONE™ safe on all exterior surfaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—formulated for paint, glass, plastic and metal. Test an inconspicuous area if unsure on etched or specialty finishes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MAXL","offers":[{"title":"Default Title","offer_id":67584907247801,"sku":"B0F1TT2TCR","price":546.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/maxlone-gallon-kit-front-label.jpg?v=1790458598"},{"product_id":"griots-garage-ceramic-3-in-1-spray-wax-1-gallon-sio2-hybrid-for-paint-trim-wheels","title":"Griot's Garage Ceramic 3-in-1 Spray Wax — 1 Gallon SiO2 Hybrid for Paint, Trim \u0026 Wheels","description":"\u003cp\u003e\u003cstrong\u003eGriot's Garage Ceramic 3-in-1 Wax is a sprayable SiO2-infused hybrid wax that delivers months of water-beading protection and a deep glossy finish to paint, plastic, trim, wheels, and chrome.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered and manufactured in the USA, this one-gallon ceramic spray wax combines SiO2 polymers with carnauba and hydrophobic agents to provide longer-lasting protection than traditional waxes. Designed for quick spray-on, wipe-off application, it bonds to exterior surfaces to repel water, reduce dirt adhesion, and boost shine without specialized tools. Use it as a primary maintenance product or as a top-up for a professional coating.\u003c\/p\u003e\n\n\u003ch3\u003eHow long will the protection and gloss last on my vehicle?\u003c\/h3\u003e\n\u003cp\u003eLongevity depends on exposure and vehicle use, but the SiO2 polymer blend is formulated to give noticeably longer-lasting protection than conventional carnauba waxes. Regular washing and reapplication every few months will maintain the hydrophobic layer and mirror-like appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable polymer and SiO2 chemistry resists wash-off better than typical wax\u003c\/li\u003e\n  \u003cli\u003eExpect months of water beading under normal environmental conditions\u003c\/li\u003e\n  \u003cli\u003eReapply after heavy washing, intense sun exposure, or seasonal maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this spray on wheels, trim, and chrome as well as paint?\u003c\/h3\u003e\n\u003cp\u003eYes — the formula is safe for painted surfaces plus plastic, rubber trim, wheels, and chrome. The hybrid blend adheres to a variety of exterior materials to provide uniform hydrophobic protection and enhanced gloss without streaking or hazing when used as directed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePaint: delivers deep, reflective shine and guards against contaminants\u003c\/li\u003e\n  \u003cli\u003ePlastic and rubber trim: rejuvenates appearance and resists fading\u003c\/li\u003e\n  \u003cli\u003eWheels and chrome: sheds brake dust and water for easier cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s the best way to apply the Griot’s Garage Ceramic 3-in-1 Wax?\u003c\/h3\u003e\n\u003cp\u003eApplication is simple: work on a cool, clean surface out of direct sunlight. Spray the product evenly onto a panel or microfiber applicator, then wipe away with a clean microfiber towel to reveal a glossy, hydrophobic layer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWash and dry vehicle first; remove heavy contaminants for best bonding\u003c\/li\u003e\n  \u003cli\u003eSpray lightly and evenly; avoid over-application to minimize residue\u003c\/li\u003e\n  \u003cli\u003eBuff with a plush microfiber towel for a streak-free mirror finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this replace a professional ceramic coating?\u003c\/h3\u003e\n\u003cp\u003eThis ceramic spray wax is an advanced maintenance solution designed to complement or substitute conventional waxes and sealants, not a direct replacement for high-build professional ceramic coatings. It provides strong temporary SiO2 protection and excellent water beading ideal for routine upkeep and prolonging the look of professionally coated surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExcellent as a regular maintenance layer over a professional coating\u003c\/li\u003e\n  \u003cli\u003eGreat stand-alone protection for daily drivers and show vehicles alike\u003c\/li\u003e\n  \u003cli\u003eUse periodically to prolong surface longevity and ease cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Griot's Garage Ceramic 3-in-1 Wax in the one-gallon size is ideal for anyone who wants a fast, reliable way to protect multiple vehicles or large surfaces — detailers, fleet managers, boat owners, RV enthusiasts, and car lovers who prefer doing maintenance themselves. It suits those who want improved water beading and lasting gloss without the complexity of specialty equipment, delivering a professional-looking finish in minutes while being safe across paint, plastic, rubber, wheels, and chrome.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCERAMIC PROTECTION: SiO2-infused shield defends against oxidation, sun damage, and dirt adhesion while enhancing gloss and water beading.\u003c\/li\u003e\n  \u003cli\u003eEASY SPRAY-ON APPLICATION: Simple spray-and-wipe use for fast, long-lasting enhancement of shine and surface protection.\u003c\/li\u003e\n  \u003cli\u003eHYDROPHOBIC AND SELF-CLEANING: Ultra-slick, water-resistant layer that reduces dirt buildup and promotes bead-off performance.\u003c\/li\u003e\n  \u003cli\u003eSAFE FOR MULTIPLE SURFACES: Effective on paint, plastic, rubber trim, wheels, and chrome without causing streaks.\u003c\/li\u003e\n  \u003cli\u003eMORE DURABLE THAN TRADITIONAL WAX: SiO2 polymer formulation offers improved durability over standard waxes and sealants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eWater , Siloxane, Modified Carnauba Wax , Dimethicone, Amorphous Silica, Benzotriazole Polymer, Glycol, Propylene Glycol Butyl Ether, C9-11 Alcohols Ethoxylated 4- 6EO, Organo-modified Silicone, Non-ionic Surfactant, Quaternary Ammonium Compound, Green Dye, Yellow Dye, Magnesium nitrate, Methylchloroisothiazolinone, Methylisothiazolinone, Fragrance\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this ceramic spray safe on matte paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use caution: test an inconspicuous area first. The product is formulated for gloss finishes; matte paints may require specialized matte-safe products.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I reapply the spray to maintain protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Reapply every 2–4 months under normal use; more frequently after heavy washing or extreme exposure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Griot's Garage","offers":[{"title":"Default Title","offer_id":67584915701945,"sku":"B088MLN1RV","price":211.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/griots-garage-ceramic-wax-front-gallon.jpg?v=1790458959"},{"product_id":"turtle-wax-ceramic-spray-wax-coating-16-oz-pack-of-6-hybrid-ceramic-sealant-6-month-protection","title":"Turtle Wax Ceramic Spray Wax Coating 16 oz Pack of 6 — Hybrid Ceramic Sealant, 6+ Month Protection","description":"\u003cp\u003e\u003cstrong\u003eTurtle Wax Hybrid Solutions Ceramic Spray Wax Coating is a spray-on, wipe-off ceramic-style sealant that boosts gloss and repels water for months with minimal effort.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for car owners who want professional-looking results without professional labor, this 16 oz spray delivers durable polymer protection and a mirror-like finish. The hybrid formula bonds to paint to help resist UV fading, road grime and light contaminants while creating instant water beading. Use it as a maintenance step after washing to extend time between full detailing sessions and keep exterior surfaces looking refreshed.\u003c\/p\u003e\n\n\u003ch3\u003eHow long does the protection last and what affects durability?\u003c\/h3\u003e\n\u003cp\u003eUnder normal conditions this ceramic spray coating can provide measurable repellency and gloss retention for at least six months, depending on exposure and care. Frequent washing with harsh detergents, abrasive brushes, or heavy environmental contaminants will shorten longevity; gentle maintenance preserves the hydrophobic layer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical durability: 6+ months with routine care\u003c\/li\u003e\n  \u003cli\u003eAvoid automatic brushes to extend life\u003c\/li\u003e\n  \u003cli\u003eReapply after heavy exposure to salt, chemicals, or abrasion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply this spray wax for best results?\u003c\/h3\u003e\n\u003cp\u003eApplication is straightforward: start with a clean, dry surface, spray a light mist, then gently buff with a microfiber towel until the finish is clear and glossy. For optimal bonding and appearance, remove embedded contamination with a clay bar or polish before applying the coating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpray on clean, dry paint in shaded or direct sunlight\u003c\/li\u003e\n  \u003cli\u003eBuff off with a quality microfiber towel\u003c\/li\u003e\n  \u003cli\u003ePrep with clay or polish for heavily contaminated surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich surfaces can this product be used on safely?\u003c\/h3\u003e\n\u003cp\u003eThe formula is safe for painted surfaces, glass, headlights, trim and wheels, giving a consistent hydrophobic effect across multiple exterior components. It is not recommended for soft-sided convertible tops where specialized fabric protectants are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe: paint, clearcoat, glass, plastic trim, headlights, wheels\u003c\/li\u003e\n  \u003cli\u003eNot recommended: fabric convertible tops\u003c\/li\u003e\n  \u003cli\u003eTest small area if using on atypical finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat visual and maintenance benefits will I notice after using it?\u003c\/h3\u003e\n\u003cp\u003eYou should see deeper color, enhanced clarity and a glossy, mirror-like surface right after buffing. Surface slickness reduces dirt adhesion and water spots, which makes rinses and dry times shorter and keeps the vehicle looking cleaner between washes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproves gloss and color depth immediately\u003c\/li\u003e\n  \u003cli\u003ePromotes water beading and faster drying\u003c\/li\u003e\n  \u003cli\u003eHelps prevent dusty soils from re-depositing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 16 oz pack (sold as a multi-unit set) is ideal for car owners, home detailers and small shops seeking an efficient, cost-effective ceramic-style maintenance product. If you want easy application, visible shine and prolonged water repellency without investing in full ceramic professional services, this spray coating fits into routine washes and seasonal upkeep.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I apply this in direct sunlight?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The spray can be applied in direct sunlight; work panel by panel and buff immediately for best results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this safe on tinted windows and trim?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is safe on glass and exterior trim, but test an inconspicuous spot first on aftermarket tints or delicate finishes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Turtle Wax","offers":[{"title":"Default Title","offer_id":67584917012665,"sku":"B094BBN67G","price":200.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/turtle-wax-front-packaging-16oz.jpg?v=1790459041"},{"product_id":"gyeon-mohs-evo-ceramic-coating-for-cars-30ml-high-gloss-super-slick-up-to-36-months-protection","title":"Gyeon MOHS EVO ceramic coating for cars 30ml — high gloss, super slick, up to 36 months protection","description":"\u003cp\u003e\u003cstrong\u003eGyeon MOHS EVO is a professional-grade, DIY ceramic coating in a compact 30ml bottle that delivers high gloss, extreme slickness and up to 36 months of paint protection when applied correctly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want a showroom-like shine and easier maintenance without paying for a shop install, Gyeon MOHS EVO is formulated to give advanced ceramic performance at home. The 30ml kit contains the essentials for a complete single-car application and uses a durable silica-based chemistry to increase gloss, improve water beading and reduce surface adhesion of contaminants. This description explains what the product does, how to use it, and whether it’s the right choice for your car care routine.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Gyeon MOHS EVO improve the look and feel of my paint?\u003c\/h3\u003e\n\n\u003cp\u003eMOHS EVO enhances surface reflectivity and smoothness so paint appears deeper and wetter. It fills microscopic irregularities and creates a slick, hydrophobic layer that makes light reflect more evenly across the finish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInstant boost in gloss and clarity for enhanced color depth.\u003c\/li\u003e\n  \u003cli\u003eSlick, glass-like surface that repels water and reduces dirt adhesion.\u003c\/li\u003e\n  \u003cli\u003eImproved light reflection for a polished, head-turning appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and longevity can I expect from a 30ml kit?\u003c\/h3\u003e\n\n\u003cp\u003eWhen applied following the included instructions, MOHS EVO is engineered to provide protection against environmental elements for up to 36 months under normal driving conditions. Longevity depends on surface prep, application quality and maintenance habits such as washing frequency and chemicals used.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFormulated to deliver up to 3 years of durability with proper application.\u003c\/li\u003e\n  \u003cli\u003eResistant to light contaminants and easier to wash than untreated paint.\u003c\/li\u003e\n  \u003cli\u003eBest results achieved after paint correction and careful surface preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs application difficult for a first-time user?\u003c\/h3\u003e\n\n\u003cp\u003eGyeon designed the MOHS EVO kit to be user-friendly for enthusiasts—no professional equipment is strictly required. The kit includes application tools and clear steps, but success depends on thorough surface prep and working in suitable conditions (cool, shaded, dust-free).\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSimple multi-step application process ideal for DIYers with patience.\u003c\/li\u003e\n  \u003cli\u003eComes with applicator and instructions to reduce guesswork.\u003c\/li\u003e\n  \u003cli\u003ePerform in a controlled environment for best, long-lasting results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain the coating to keep results looking fresh?\u003c\/h3\u003e\n\n\u003cp\u003eMaintenance is straightforward: regular gentle washes, use of pH-neutral shampoos, and occasional top-up products if desired. Avoid harsh detergents, automatic brushes and abrasive polishes that can wear the coating faster.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRoutine two-bucket washes with a soft microfiber mitt recommended.\u003c\/li\u003e\n  \u003cli\u003eUse pH-neutral car shampoo and avoid strong solvents or acid-based cleaners.\u003c\/li\u003e\n  \u003cli\u003eOptional maintenance sprays help revive hydrophobic properties between reapplications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Gyeon MOHS EVO 30ml is aimed at car owners and detailing enthusiasts who want near-professional ceramic protection and a high-gloss finish without booking a professional installation. It’s a good fit for well-prepared paintwork on compact and mid-size cars, owners committed to proper prep and gentle maintenance, and hobbyists who appreciate a durable, slick finish that reduces cleaning time. If you prefer minimal upkeep and professional-grade results at home, this compact kit offers a powerful balance of performance and convenience.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much car surface will 30ml of Gyeon MOHS EVO cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A properly applied 30ml kit typically covers a single compact to mid-size car or smaller areas on larger vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to polish before applying MOHS EVO?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—paint correction is recommended. Apply MOHS EVO to clean, defect-free paint for best durability and gloss.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gyeon","offers":[{"title":"Default Title","offer_id":67584917438649,"sku":"B09YS7NSWG","price":167.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gyeon-mohs-evo-front-packaging.jpg?v=1790459060"},{"product_id":"chemical-guys-big-mouth-max-foam-cannon-for-pressure-washers-34-oz-wide-mouth-bottle-thick-clinging-foam","title":"Chemical Guys Big Mouth Max Foam Cannon for Pressure Washers — 34 oz Wide-Mouth Bottle, Thick Clinging Foam","description":"\u003cp\u003e\u003cstrong\u003eThe Chemical Guys Big Mouth Max Foam Cannon is a heavy-duty pressure-washer attachment that produces thick, clinging foam from a 34 oz wide-mouth bottle for faster, safer vehicle and surface cleaning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for both detailing pros and weekend washers, the Big Mouth Max (EQP324) converts most pressure washers into a high-foaming system that coats paint, wheels, and exterior surfaces with a rich lather. Its oversized opening and generous bottle capacity make filling simple and reduce interruptions, while the air-injection nozzle and adjustable spray pattern let you dial foam volume and coverage to the job.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Big Mouth Max create better foam for washing?\u003c\/h3\u003e\n\u003cp\u003eThe cannon uses an air-injection design combined with a precision nozzle to mix soap and water into dense, shaving-cream–like suds that cling to vertical surfaces. That cling time helps loosen dirt and road grime so you can rinse more effectively with less scrubbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAir-injection system for thicker bubbles and longer dwell time\u003c\/li\u003e\n  \u003cli\u003eAdjustable nozzle from fan to stream to control coverage\u003c\/li\u003e\n  \u003cli\u003eCompatible with a wide range of Chemical Guys soaps and shampoos\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the 34 oz wide-mouth bottle save time and reduce mess?\u003c\/h3\u003e\n\u003cp\u003eYes — the large opening is engineered to let you pour soap directly without spills or awkward funnels, and the 34 oz capacity covers multiple cars or large vehicles between fills. That means fewer stops to refill and less wasted product on the driveway.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWide-mouth fill prevents drips and overspill\u003c\/li\u003e\n  \u003cli\u003e34 oz holds enough solution for several vehicles or one large truck\/RV\u003c\/li\u003e\n  \u003cli\u003eTransparent markings (where present) help measure dilution quickly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the foam cannon durable and easy to attach to my pressure washer?\u003c\/h3\u003e\n\u003cp\u003eThe Big Mouth Max is built with reinforced materials and stainless-steel fittings to handle repeated use without leaking or premature wear. It uses common quick-connect fittings and straightforward controls so both beginners and pros can mount, adjust, and remove it quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless-steel fittings and durable seals for long life\u003c\/li\u003e\n  \u003cli\u003eStandard pressure-washer connections for broad compatibility\u003c\/li\u003e\n  \u003cli\u003eSimple thumb-adjust controls for spray and foam output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and soaps work best with this foam cannon?\u003c\/h3\u003e\n\u003cp\u003eThe unit is versatile enough for painted vehicles, coated finishes, wheels, motorcycles, boats, and many home exterior surfaces like siding and patio furniture. It performs well with light maintenance shampoos through advanced, foam-friendly Chemical Guys formulas — avoid overly viscous or abrasive cleaners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for painted and coated automotive finishes when used as directed\u003c\/li\u003e\n  \u003cli\u003eGreat with most Chemical Guys wash soaps, shampoos, and foaming blends\u003c\/li\u003e\n  \u003cli\u003eAlso effective on wheels, boat hulls, and outdoor siding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Detailers and vehicle owners who want a faster, lower-risk washing routine will appreciate the Big Mouth Max. It’s ideal for anyone who washes multiple vehicles, works on larger rigs like trucks and RVs, or wants the convenience of a spill-free refill system combined with professional-style foam performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the Big Mouth Max fit my pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It connects via standard quick-connect fittings found on most electric and gas pressure washers; check your washer’s fitting size for compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use any soap in the foam cannon?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use foam-friendly shampoos and Chemical Guys formulas; avoid very thick or heavily abrasive cleaners to prevent clogging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Chemical Guys","offers":[{"title":"Default Title","offer_id":67584920092857,"sku":"B091KLW5Y8","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/chemical-guys-big-mouth-max-front-view.jpg?v=1790459190"},{"product_id":"bugslide-64-oz-cleaner-refill-waterless-streak-free-detailing-concentrate-for-cars-boats","title":"BugSlide 64 oz Cleaner Refill — Waterless, Streak-Free Detailing Concentrate for Cars \u0026 Boats","description":"\u003cp\u003e\u003cstrong\u003eBugSlide 64 Oz Cleaner Refill is a waterless, streak-free detailing concentrate that refills spray bottles to clean, degrease, and protect multiple vehicle surfaces with a single step.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep a refill on hand to turn any spray bottle into a fast, all-in-one detailing solution for cars, trucks, motorcycles, RVs and boats. This 64-ounce refill is formulated to dissolve bugs, grime, fingerprints and light road film while leaving a clear, non-waxy finish. It’s designed to work on paint, glass, chrome, plastics and more without abrasives or harsh solvents, making it a useful choice when water access is limited or when you prefer a low-effort wipe-and-buff routine.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly does BugSlide remove bugs and road film?\u003c\/h3\u003e\n\u003cp\u003eThe formula lifts and releases sticky residues so you can wipe them away with minimal rubbing. For typical contaminants apply, wait 30–60 seconds, and wipe with a microfiber towel; then flip to the dry side and buff to shine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply directly to surface from a spray bottle filled from the refill.\u003c\/li\u003e\n  \u003cli\u003eLet solution dwell briefly to soften insect remains and grime.\u003c\/li\u003e\n  \u003cli\u003eWipe with a microfiber towel and buff for a clear finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this refill work on all exterior vehicle surfaces?\u003c\/h3\u003e\n\u003cp\u003eYes—BugSlide’s non-abrasive formula is safe for most non-porous surfaces. It cleans paint, glass, chrome, fiberglass, plastics, vinyl and leather finishes without removing factory coatings or adding waxy residue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe on paint, clear coats and automotive glass.\u003c\/li\u003e\n  \u003cli\u003eCompatible with chrome, aluminum, plexiglass, Lexan and acrylic.\u003c\/li\u003e\n  \u003cli\u003eUseful on interior trims like vinyl and leather for quick touch-ups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the product leave streaks or require waxing afterward?\u003c\/h3\u003e\n\u003cp\u003eBugSlide is formulated to dry clear and residue-free, so you won’t need to wax after use for everyday cleaning. The release agent includes a UV filter that helps reduce early fading without leaving a powdery or tacky film.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDries crystal clear with no yellow tint or build-up.\u003c\/li\u003e\n  \u003cli\u003eNo wax, petroleum, silicone, Teflon, or ammonia in the formula.\u003c\/li\u003e\n  \u003cli\u003eLeaves surfaces ready for storage or immediate use without extra steps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use this 64 oz refill in the field?\u003c\/h3\u003e\n\u003cp\u003eThe refill simplifies restocking standard spray bottles—pour, attach, and you’re ready to clean. It’s suitable for use in direct sunlight and works well for mobile detailers, road trips, or household garage maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePour directly into empty trigger or pump spray bottles—no measuring required.\u003c\/li\u003e\n  \u003cli\u003eOne-step spray, wipe, and buff application for fast results.\u003c\/li\u003e\n  \u003cli\u003eWorks across a range of vehicle types: motorcycles, cars, trucks, RVs, boats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? BugSlide 64 Oz Cleaner Refill is aimed at vehicle owners, mobile detailers and DIY enthusiasts who want a versatile, waterless cleaning option that’s gentle on finishes yet effective on bugs and everyday grime. It’s particularly helpful for people who need a concentrated refill to keep several spray bottles topped off—ideal for multi-vehicle households, detailing businesses, boaters and anyone who prefers quick, scratch-free cleaning without harsh chemicals.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I pour the 64 oz refill into any spray bottle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Pour the refill into an empty trigger or pump spray bottle, then spray, wait 30–60 seconds, wipe, and buff.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is BugSlide safe on automotive paint and glass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The non-abrasive, wax-free formula is safe for paint, clear coats, glass, chrome and many non-porous surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BugSlide","offers":[{"title":"Default Title","offer_id":67584925696185,"sku":"B000GZYP78","price":179.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bugslide-64oz-front-label.jpg?v=1790459380"},{"product_id":"w-foam-cannon-car-wash-detergent-pro50-1-06-gal-concentrate-touchless-foaming-cleaner-for-coatings","title":"W Foam Cannon Car Wash Detergent - Pro50 1.06 gal Concentrate, Touchless Foaming Cleaner for Coatings","description":"\u003cp\u003e\u003cstrong\u003eW Wash Chems Pro50 Foam Cannon Car Wash is a concentrated, touchless vehicle detergent designed for foam cannons and pressure washers to lift road film, grease, and grime without scrubbing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003ePro50 is a professional-grade, multi-purpose car wash concentrate packaged in a 1.06 gallon bottle. It dilutes for economy, produces clingy foam with foam cannons and pressure washers, and is formulated for safe use on painted finishes, vinyl wraps, and ceramic coatings when used as directed. The formula is intended for both home enthusiasts and commercial detailers who need efficient cleaning across cars, trucks, RVs, farm equipment, and fleet vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Pro50 remove dirt without touching the paint?\u003c\/h3\u003e\n\n\u003cp\u003ePro50 uses a concentrated detergent blend that loosens and suspends contaminants so they rinse away with water pressure, reducing the need for brushes or mitts. The foam encapsulates road film and grime, allowing the rinse to carry particles off the surface rather than dragging them across paint.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eContains surfactants that break surface tension and release embedded dirt.\u003c\/li\u003e\n  \u003cli\u003eProduces clingy foam for extended dwell time with a foam cannon.\u003c\/li\u003e\n  \u003cli\u003eRinses cleanly to minimize streaking and spotting when pressure-rinsed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use Pro50 with my foam cannon or pressure washer?\u003c\/h3\u003e\n\n\u003cp\u003eYes — Pro50 is formulated to work with foam cannons, pressure washers, and pump sprayers for flexible application. Dilution ratios can be adjusted by soil level and equipment type to balance foam thickness, coverage, and economy.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRecommended for foam cannon and pressure-washer lance delivery systems.\u003c\/li\u003e\n  \u003cli\u003eAdjust dilution for light maintenance washes or heavy mud removal.\u003c\/li\u003e\n  \u003cli\u003eCompatible with pump sprayers for spot cleaning and machinery use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs Pro50 safe for wraps and ceramic-coated vehicles?\u003c\/h3\u003e\n\n\u003cp\u003ePro50 is designed for routine maintenance of coated and wrapped surfaces when used according to instructions. It cleans without aggressive abrasives and is suitable for regular washing of vinyl wraps and ceramic\/professional protective coatings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003epH-balanced for maintenance cleaning of protected finishes (follow label directions).\u003c\/li\u003e\n  \u003cli\u003eAvoid extended dwell on hot surfaces; rinse thoroughly after use.\u003c\/li\u003e\n  \u003cli\u003eTest an inconspicuous area if unsure about compatibility with specialty films or coatings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow cost-effective is the 1.06 gallon Pro50 concentrate?\u003c\/h3\u003e\n\n\u003cp\u003eThe gallon concentrate lets you tailor dilution for each job, stretching the number of washes per container and lowering per-wash cost. This makes Pro50 practical for hobbyists, fleet managers, and commercial detailers who wash frequently.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDilutable concentrate means more washes per container versus ready-to-use soaps.\u003c\/li\u003e\n  \u003cli\u003eFlexible ratios let you conserve product on light washes and boost strength for heavy soils.\u003c\/li\u003e\n  \u003cli\u003eWorks on cars, trucks, RVs, trailers, tractors, UTVs and equipment to simplify inventory.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: W Wash Chems Pro50 is aimed at car owners and professionals who want a reliable, touchless cleaning option that pairs with foam cannons and pressure washers. It suits detailing shops, fleet services, farmers, and off-road enthusiasts needing a versatile concentrate that cleans a wide range of vehicles and equipment while keeping maintenance time and abrasion to a minimum. Users seeking a heavy-duty degreaser for engine bays or interior fabrics should choose products specifically formulated for those tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What dilution ratio should I use with a foam cannon?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Start with 1:20 (concentrate:water) for general washing and increase concentration for heavier soils; adjust based on foam quality.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Pro50 safe on ceramic coatings and vinyl wraps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for routine cleaning when used as directed; avoid prolonged dwell on hot surfaces and rinse thoroughly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"W","offers":[{"title":"Default Title","offer_id":67584925991097,"sku":"B07Z8FYL1K","price":206.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/w-wash-chems-pro50-front-packaging.jpg?v=1790459397"},{"product_id":"nanoskin-cherry-suds-car-wash-shampoo-concentrate-5-gallon-foaming-ph-neutral","title":"Nanoskin Cherry Suds Car Wash Shampoo Concentrate — 5 Gallon Foaming, pH-Neutral","description":"\u003cp\u003e\u003cstrong\u003eNanoskin CHERRY SUDS is a highly concentrated, cherry-scented foaming car wash shampoo that creates thick, stable suds while being pH-neutral and safe on paint, trim, and glass.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you clean cars at home or run a professional detailing bay, this 5-gallon concentrate stretches a long way—diluting up to 127:1—and produces clingy foam that lifts dirt without stripping wax or sealants. The biodegradable, phosphate-free formula is designed for use with foam cannons, foam guns, pressure washer attachments, or traditional wash buckets and mitts.\u003c\/p\u003e\n\n\u003ch3\u003eHow does CHERRY SUDS deliver cleaning power without harming wax or coatings?\u003c\/h3\u003e\n\u003cp\u003eThe formula is pH-neutral, so it cleans effectively while minimizing risk to existing waxes, sealants, and ceramic coatings. Instead of aggressive degreasers, it relies on concentrated surfactants and thick foaming action to encapsulate and suspend grime for safe removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003epH-balanced formula that’s wax- and sealant-friendly\u003c\/li\u003e\n  \u003cli\u003eConcentrated surfactants lift dirt rather than dissolve protective layers\u003c\/li\u003e\n  \u003cli\u003eProduces stable foam to encapsulate road grime for safer rinsing\u003c\/li\u003e\n  \u003cli\u003eBiodegradable and phosphate-free for eco-friendlier washing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat dilution and application methods work best with the 5-gallon size?\u003c\/h3\u003e\n\u003cp\u003eCherry Suds dilutes up to 127:1, so only small amounts are needed per wash. It performs well as a foam cannon or foam gun soap for pressure washers, and also mixes easily in a standard five-gallon wash bucket or pump sprayer for larger vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApproximate 127:1 max dilution for economy—about 5 oz per 5-gallon bucket\u003c\/li\u003e\n  \u003cli\u003eCompatible with foam cannons, foam guns, and pressure washer attachments\u003c\/li\u003e\n  \u003cli\u003eMixes smoothly in pump sprayers and bucket-and-mitt setups\u003c\/li\u003e\n  \u003cli\u003eWorks on cars, trucks, motorcycles, and RVs with the same dilution guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill CHERRY SUDS foam cling to vertical surfaces and improve cleaning time?\u003c\/h3\u003e\n\u003cp\u003eYes—this shampoo produces rich, clingy suds that stick to vertical panels long enough to loosen soils and grime. That increased dwell time helps the surfactants penetrate contaminants before you rinse, reducing the need for aggressive scrubbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick foam formulation designed for strong cling and coverage\u003c\/li\u003e\n  \u003cli\u003eImproves contact time to loosen embedded road film and brake dust\u003c\/li\u003e\n  \u003cli\u003eReduces repeated passes and aggressive wiping when used properly\u003c\/li\u003e\n  \u003cli\u003eRinses clean without leaving slippery residues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product safe for different exterior surfaces on my vehicle?\u003c\/h3\u003e\n\u003cp\u003eCherry Suds is formulated for broad compatibility across exterior materials. It’s suitable for painted surfaces, clear coats, plastic trim, rubber seals, vinyl, and glass when used at recommended dilutions and rinsed thoroughly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for paint, clear coat, and factory finishes\u003c\/li\u003e\n  \u003cli\u003eNon-stripping on rubber, vinyl, and plastic trim at correct dilutions\u003c\/li\u003e\n  \u003cli\u003eEffective on windows when followed by a water-only or glass cleaner rinse\u003c\/li\u003e\n  \u003cli\u003eRecommended for routine maintenance rather than heavy decontamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Nanoskin CHERRY SUDS 5 Gallon is aimed at detailing professionals, fleet managers, and car enthusiasts who want an economical, high-foaming shampoo that protects existing waxes and coatings. If you use foam cannons, pressure washers, or wash buckets regularly and prefer a biodegradable, cherry-scented concentrate that stretches across multiple vehicles, this product fits neatly into a professional or home car-care kit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures at a glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e127:1 dilution for long-lasting use\u003c\/li\u003e\n  \u003cli\u003epH-neutral and wax-safe\u003c\/li\u003e\n  \u003cli\u003eBiodegradable and phosphate-free\u003c\/li\u003e\n  \u003cli\u003eWorks with foam cannons, guns, pressure washers, and buckets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eWater, nonionic surfactant\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use CHERRY SUDS with a pressure washer foam cannon?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s formulated to work with foam cannons and pressure washer attachments at recommended dilutions for thick, clingy foam.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this shampoo strip existing wax or sealants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The pH-neutral formula is designed to be wax- and sealant-safe when used at proper dilution.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Nanoskin","offers":[{"title":"Default Title","offer_id":67584932839609,"sku":"B016HNVIN6","price":311.26,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/nanoskin-cherry-suds-front-jug.jpg?v=1790459632"},{"product_id":"prosol-works-bugs-n-all-concentrated-car-cleaner-degreaser-1-gallon-bug-tar-sap-remover-with-free-32-oz-spray-bottle","title":"PROSOL WORKS Bugs N’ All Concentrated Car Cleaner \u0026 Degreaser 1 Gallon — Bug, Tar \u0026 Sap Remover with Free 32 oz Spray Bottle","description":"\u003cp\u003e\u003cstrong\u003eBugs N’ All is a concentrated, multipurpose exterior car cleaner and degreaser designed to remove bug splatter, tar, tree sap, grease, and grime while remaining safe on paint, metal, chrome, aluminum, windows, and mirrors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis one-gallon concentrate from PROSOL WORKS makes cleaning faster and more economical: dilute to suit the job, spray, and wipe away stubborn residues without resorting to abrasive scrubbing. Included is a free 32 oz spray bottle so you can mix a ready-to-use solution for spot cleaning and quick touch-ups. The formula emphasizes surface safety and biodegradability while delivering fast breakdown of sticky contaminants on vehicles, boats, motorcycles, and RVs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Bugs N’ All remove stubborn bugs and tar so quickly?\u003c\/h3\u003e\n\u003cp\u003eThe concentrate contains targeted solvents and surfactants that dissolve organic bug remains and petroleum-based tar, loosening them from the surface for easy removal. It works quickly on contact so you can lift residue with a microfiber cloth rather than aggressive mechanical abrasion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConcentrated formula for strong solvent action on dried insects and tar\u003c\/li\u003e\n  \u003cli\u003eMixable strengths — use full strength for heavy buildup or dilute for routine cleaning\u003c\/li\u003e\n  \u003cli\u003eBreaks surface tension so contaminants rinse away smoothly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this safe to use on painted surfaces, chrome, and glass?\u003c\/h3\u003e\n\u003cp\u003eBugs N’ All is formulated to be tough on grime but gentle on common exterior finishes when used as directed. The product is non-toxic and biodegradable, minimizing the risk of dulling paint or etching metal and glass during normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for clear coats and painted surfaces when rinsed and wiped off promptly\u003c\/li\u003e\n  \u003cli\u003eSuitable for chrome, aluminum, and stainless surfaces without abrasive scrubbing\u003c\/li\u003e\n  \u003cli\u003eWorks on windows and mirrors for streak-free contact removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I mix and apply the concentrate for best results?\u003c\/h3\u003e\n\u003cp\u003eChoose a dilution based on how stubborn the residue is: stronger for tar and sap, lighter for everyday bug removal. Apply with the included 32 oz spray bottle or a foamer, let the solution dwell briefly, then wipe with a microfiber towel and rinse for a clean finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpot cleaning: use full strength or up to 1:1 dilution for heavy buildup\u003c\/li\u003e\n  \u003cli\u003eGeneral maintenance: dilute to recommended ratio (follow label instructions) for routine washes\u003c\/li\u003e\n  \u003cli\u003eAlways test on an inconspicuous area and avoid prolonged drying on hot surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat other cleaning tasks can this product handle besides bug and tar removal?\u003c\/h3\u003e\n\u003cp\u003eBugs N’ All functions as a versatile exterior degreaser — it lifts road grime, brake dust, oily stains, and general dirt from many vehicle surfaces. That makes it useful for detailing wheels, bumpers, trim, engine bays, and marine exteriors with appropriate rinsing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemoves grease and oil spots from metal and painted panels\u003c\/li\u003e\n  \u003cli\u003eCleans aluminum trim, chrome accents, and plastic moldings safely\u003c\/li\u003e\n  \u003cli\u003eEffective on boats, motorcycles, RVs, and heavy equipment exteriors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers and detailers who want a single, economical cleaner that handles tough exterior residues without aggressive abrasion will appreciate this product. PROSOL WORKS Bugs N’ All is suitable for car enthusiasts, professional detail shops, fleet managers, boat owners, and DIYers who need a concentrated solution in bulk. The included 32 oz spray bottle makes it convenient for spot treatments, while the one-gallon concentrate offers long-term value for frequent use.\u003c\/p\u003e\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eProprietary Ingredients, surfactants and water\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Bugs N’ All on my car's clearcoat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, when used as directed and rinsed promptly it’s safe for clear coats; always test in an inconspicuous spot first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much ready-to-use cleaner does the one-gallon concentrate make?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The gallon concentrate can produce up to about 32 gallons of diluted cleaner depending on your chosen dilution ratio.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PROSOL WORKS","offers":[{"title":"Default Title","offer_id":67584934707385,"sku":"B01AMJ5POE","price":185.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/prosol-works-bugs-n-all-front-label.jpg?v=1790459725"},{"product_id":"adams-polishes-advanced-graphene-ceramic-coating-standard-kit-10h-hardness-uv-tracing-for-long-lasting-hydrophobic-protection","title":"Adam's Polishes Advanced Graphene Ceramic Coating Standard Kit — 10H Hardness \u0026 UV Tracing for Long-Lasting Hydrophobic Protection","description":"\u003cp\u003e\u003cstrong\u003eAdam's Advanced Graphene Ceramic Coating (Standard Kit) is a professional-grade nanocrystalline car coating that delivers 10H surface hardness, long-term hydrophobic protection, and patent-pending UV tracing to ensure a complete, even application.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines graphene-enhanced silicate resins with Adam’s patented UV tracing technology to create a high-gloss, water-repellent barrier for paint, glass, wheels, trim and more. Formulated for both enthusiasts and detailing pros, the coating aims to resist environmental fallout, reduce staining, and make routine washing easier while preserving depth of color and surface clarity.\u003c\/p\u003e\n\n\u003ch3\u003eHow long will the protection last on my vehicle?\u003c\/h3\u003e\n\u003cp\u003eLongevity depends on surface prep, application quality, and environmental exposure; under proper preparation and application, the formula is engineered to provide multi-year protection. Adam’s graphene chemistry and added resin volume increase durability compared with standard ceramic coatings, helping maintain repellency and gloss over extended periods.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for more than 7 years in many conditions with ideal prep and maintenance.\u003c\/li\u003e\n  \u003cli\u003eGraphene and silicate resins increase scratch and chemical resistance.\u003c\/li\u003e\n  \u003cli\u003eResin-rich formula improves retention of hydrophobic performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces can I safely coat with this product?\u003c\/h3\u003e\n\u003cp\u003eThe Advanced Graphene coating is formulated to bond to clear coat, single-stage paint, lacquer, vinyl wraps, glass, chrome, and headlights. It’s flexible enough for trim and wheels while providing a slick, bead-friendly finish that helps shed water and reduce dirt adhesion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe on factory clear coats and single-stage paint systems.\u003c\/li\u003e\n  \u003cli\u003eUsable on glass, headlights, chrome and painted wheels for uniform protection.\u003c\/li\u003e\n  \u003cli\u003eCompatible with vinyl wraps when proper testing and prep are done.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know I applied the coating evenly and didn’t miss a spot?\u003c\/h3\u003e\n\u003cp\u003eAdam’s patent-pending Ceramic Glow (UV tracing) technology acts as an application aid by fluorescing under a UV light so you can verify complete coverage. This makes it easier for first-time applicators and professionals to catch missed areas and ensure a consistent film thickness across panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV tracing reveals uncovered or thin areas for re-application before curing.\u003c\/li\u003e\n  \u003cli\u003eImproves accuracy during multi-panel jobs and reduces rework.\u003c\/li\u003e\n  \u003cli\u003eUseful both in-shop and mobile detailing setups with a portable UV lamp.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance is required after applying the coating?\u003c\/h3\u003e\n\u003cp\u003eMaintenance focuses on gentle washing and periodic inspections rather than frequent reapplications. The coating’s hydrophobic surface makes regular washing simpler by minimizing bonded contaminants; use pH-neutral car shampoo and soft microfiber towels to preserve the finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRoutine washing with a mild shampoo and two-bucket method recommended.\u003c\/li\u003e\n  \u003cli\u003eAvoid abrasive polishes that could abrade the coating layer.\u003c\/li\u003e\n  \u003cli\u003eInspect annually for coverage and reapply top-up products if desired.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Adam's Advanced Graphene Ceramic Coating Standard Kit is aimed at car enthusiasts, professional detailers, and owners who want a durable, high-gloss protective layer that simplifies maintenance and enhances visual depth. If you take care to properly decontaminate and prepare surfaces, and you value long-lasting hydrophobic performance plus the confidence of UV-assisted application, this kit is designed to meet those needs. It’s not a temporary spray-on product; plan for careful prep and methodical application to achieve professional results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a UV light to apply Adam's Graphene Coating?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A UV light helps verify coverage using the product’s tracing feature, but basic application can proceed without it. UV use reduces missed spots.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this coating be used on vinyl wraps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's compatible with many vinyl wraps when proper surface prep and a small test patch are performed first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Adam's Polishes","offers":[{"title":"Default Title","offer_id":67584937066681,"sku":"B099SFV2MB","price":340.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/adams-graphene-coating-front-packaging_060d7351-4b3e-41da-859e-2bbf28baccb8.jpg?v=1790459835"},{"product_id":"adams-polishes-graphene-ceramic-coating-complete-kit-10h-hardness-uv-trace-for-long-lasting-protection","title":"Adam's Polishes Graphene Ceramic Coating Complete Kit — 10H Hardness \u0026 UV Trace for Long‑Lasting Protection","description":"\u003cp\u003e\u003cstrong\u003eAdam's Advanced Graphene Ceramic Coating (Complete Kit) is a professional-grade nanoceramic formula that delivers 10H surface hardness, extreme water beading, and a visible UV-tracing aid to help ensure full, even coverage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit combines graphene-enhanced resins with silicate chemistry to create a glossy, slick barrier that resists weathering, contaminants, and UV exposure. Designed for both enthusiast detailers and pros, the formula increases surface slickness and depth of color while simplifying application with patent-pending UV tracing technology. The result is a long-lasting protective layer suitable for paint, glass, wheels, trim, and more.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coating improve durability and surface hardness?\u003c\/h3\u003e\n\u003cp\u003eAdam’s graphene ceramic coating uses advanced nanomaterials and silicate resins to build a hard, resilient film on vehicle surfaces. That film raises scratch and stain resistance compared with normal clear coat and reduces micro-marring during washing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10H surface hardness for improved scratch resistance\u003c\/li\u003e\n  \u003cli\u003eGraphene additives for flexibility and chemical resilience\u003c\/li\u003e\n  \u003cli\u003eAdditional silicate resin for extended longevity\u003c\/li\u003e\n  \u003cli\u003eSafe on clear coat, single-stage, wraps, and lacquer finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the UV tracing technology useful during application?\u003c\/h3\u003e\n\u003cp\u003eThe kit’s patent-pending Ceramic Glow technology creates a visible trace under UV light so you can confirm full coverage and avoid missed spots. This application aid is especially helpful on large panels, dark colors, or in low-light conditions where wet-film indicators may be hard to see.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV-visible tracing shows where coating has been applied\u003c\/li\u003e\n  \u003cli\u003eReduces rework by making overlap and misses obvious\u003c\/li\u003e\n  \u003cli\u003eHelpful for both first-time applicators and pros seeking consistent results\u003c\/li\u003e\n  \u003cli\u003eEases quality control on multi-panel jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this product affect water behavior and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe graphene-enhanced nano-layer creates extreme hydrophobicity that promotes beading and quick runoff, keeping surfaces cleaner between washes. The slick finish also lowers dirt adhesion, making routine maintenance faster and gentler on the paint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePronounced water beading and sheet-off for easier drying\u003c\/li\u003e\n  \u003cli\u003eReduces bonding of road grime and contaminants\u003c\/li\u003e\n  \u003cli\u003eSlick surface minimizes washing-induced swirl marks\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard wash and maintenance routines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will the protection last and where can I apply it?\u003c\/h3\u003e\n\u003cp\u003eThe formula is engineered for multi-year durability, with lab and field testing indicating long-term resistance to environmental and chemical stressors. It’s formulated for use on painted surfaces as well as glass, chrome, headlights, wheels, and trim when applied per instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLong-term protection measured in years when properly applied\u003c\/li\u003e\n  \u003cli\u003eSafe on a wide range of automotive surfaces\u003c\/li\u003e\n  \u003cli\u003eResists UV damage, water spotting, and light staining\u003c\/li\u003e\n  \u003cli\u003eBest longevity when combined with proper surface prep\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Adam’s Advanced Graphene Ceramic Coating kit suits detail enthusiasts and professional shops who want a durable, high-gloss finish with an easier, verifiable application process. If you value extended protection, enhanced gloss and hydrophobic performance across paint, glass, and trim — and prefer a visual aid to confirm full coverage — this kit is designed to deliver professional-level results while reducing application guesswork.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this coating safe on vinyl wraps and single-stage paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The formula is compatible with clear coat, single-stage, and vinyl wrap surfaces when applied following the instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special lighting to use the UV tracing feature?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A UV or black light makes the tracing visible and helps confirm coverage, especially on dark or large panels.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Adam's Polishes","offers":[{"title":"Default Title","offer_id":67584937099449,"sku":"B099SGQVLD","price":366.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/adams-graphene-coating-front-packaging.jpg?v=1790459834"},{"product_id":"adams-polishes-essential-24-piece-car-wash-kit-foam-gun-ph-balanced-shampoo-microfiber-tools","title":"Adam's Polishes Essential 24-Piece Car Wash Kit — Foam Gun, pH-Balanced Shampoo \u0026 Microfiber Tools","description":"\u003cp\u003e\u003cstrong\u003eAdam's Essential Car Wash Kit is a 24-piece, all-in-one detailing collection that supplies cleaners, dressings, and tools to wash, decontaminate, and protect a vehicle inside and out.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit gathers professional-grade chemicals and finishing products into one compact package, including a foam gun, wash bucket, microfiber towels, brushes, and tailored cleaners for paint, wheels, glass, tires, and interiors. Each formula is pH-balanced and made in the USA, designed to deliver thorough cleaning without leaving residue. The bundle is intended for routine washes, weekend deep details, and prepping surfaces before polishing or ceramic coating.\u003c\/p\u003e\n\n\u003ch3\u003eWhat comes in the 24 pieces and how do they work together?\u003c\/h3\u003e\n\u003cp\u003eThe set combines concentrated cleaners, applicators, and rinse\/scrub tools so you can tackle all surfaces without mixing incompatible products. Items are selected to sequence from safe wash to surface dressing for a full detail workflow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFoam gun for pre-soak and clinging suds to loosen dirt\u003c\/li\u003e\n  \u003cli\u003epH-balanced car shampoo that lifts contaminants without stripping wax\u003c\/li\u003e\n  \u003cli\u003eWheel and brake-cleaner formulas plus dedicated brushes\u003c\/li\u003e\n  \u003cli\u003eMicrofiber towels, applicators, and interior cleaners for safe finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit protect paint and exterior trim during cleaning?\u003c\/h3\u003e\n\u003cp\u003eProducts are formulated to be gentle on clear coat and trim while effectively removing grit and grime. The workflow favors a two-bucket method and foaming pre-wash to minimize swirl marks and surface marring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuds from the foam gun encapsulate dirt to reduce abrasion during washing\u003c\/li\u003e\n  \u003cli\u003epH-balanced shampoo maintains existing wax or sealant layers\u003c\/li\u003e\n  \u003cli\u003eDedicated trim and plastic cleaners restore appearance without bleaching\u003c\/li\u003e\n  \u003cli\u003eSoft microfiber and wash mitts reduce surface contact friction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use the kit on wheels, tires, and glass safely?\u003c\/h3\u003e\n\u003cp\u003eYes—specific cleaners target different materials so you don’t have to rely on a single product for all surfaces. Using the right formula for each area improves cleaning power and prevents damage to finishes and visibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWheel cleaner breaks down brake dust and road grime without etching metal\u003c\/li\u003e\n  \u003cli\u003eTire cleaner and dressing revive sidewalls and help restore a deep black finish\u003c\/li\u003e\n  \u003cli\u003eGlass cleaner provides streak-free clarity for mirrors and windshields\u003c\/li\u003e\n  \u003cli\u003eSeparate brushes and towels keep wheel grime away from paint and glass\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is this kit for beginners or gifting to car lovers?\u003c\/h3\u003e\n\u003cp\u003eThe set is organized to walk a new user through a full detail without needing to buy extra supplies. Clear-purpose items and a balanced formula selection make it approachable for DIYers while still offering pro-level results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStarter-friendly tools like foam gun, bucket, and mitt simplify setup\u003c\/li\u003e\n  \u003cli\u003eInstruction-friendly product roles reduce guesswork for each surface\u003c\/li\u003e\n  \u003cli\u003eHigh-quality towels and applicators improve outcomes with minimal effort\u003c\/li\u003e\n  \u003cli\u003eAttractive packaging and comprehensive selection make it a practical gift\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Adam's Essential Car Wash Kit suits car and truck owners who want a complete cleaning and care solution without sourcing individual products. It’s ideal for weekend detailers, families who maintain multiple vehicles, and gift-givers seeking a ready-made, professional-grade kit. Professionals can use it as a reliable chemical complement for routine jobs, while beginners will appreciate the safe, surface-specific formulas and included tools that guide a full exterior and interior wash routine.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit safe for clear coat and ceramic-coated cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The formulas are pH-balanced and safe for clear coats; use gentle shampoos and avoid abrasive tools on ceramic coatings to preserve protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the kit clean wheels and tires without damaging paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—dedicated wheel and tire cleaners plus separate brushes prevent cross-contamination and protect painted surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Adam's Polishes","offers":[{"title":"Default Title","offer_id":67584941457593,"sku":"B0DTQZWH14","price":430.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/adams-polishes-kit-front-packaging.jpg?v=1790460116"},{"product_id":"adams-polishes-uv-graphene-10h-ceramic-coating-7-year-paint-protection-with-uv-glow","title":"Adam's Polishes UV Graphene 10H Ceramic Coating - 7+ Year Paint Protection with UV Glow","description":"\u003cp\u003e\u003cstrong\u003eAdam's Polishes UV Graphene Ceramic Coating is a professional-grade 10H ceramic sealant that creates a glossy, hydrophobic barrier with UV glow technology for long-lasting paint protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis advanced coating combines graphene-enhanced durability with a UV-reactive finish to protect and highlight automotive paint, gelcoat, and metal surfaces. Formulated to be applied after a full wash, clay bar treatment, and optional paint correction, it bonds to the clearcoat to resist water, contaminants, and light abrasion while adding an eye-catching glow under UV light. The product targets enthusiasts, detailers, and owners of cars, boats, RVs, and motorcycles who want a high-performance, long-lasting cosmetic shield.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coating improve my vehicle's appearance and gloss?\u003c\/h3\u003e\n\u003cp\u003eThe graphene-infused formula increases surface depth and reflectivity for a deep, wet-looking shine while the UV-reactive components add a subtle glow under black light. It fills microscopic surface imperfections and levels the clearcoat for enhanced clarity without adding heavy buildup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGraphene boosts clarity and light reflection for richer color depth\u003c\/li\u003e\n  \u003cli\u003e10H hardness rating increases scratch resistance to light abrasion\u003c\/li\u003e\n  \u003cli\u003eUV glow technology creates a distinctive visual effect under ultraviolet light\u003c\/li\u003e\n  \u003cli\u003eThin, even layer application prevents hazing and maintains factory finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does the protection last and what maintenance is required?\u003c\/h3\u003e\n\u003cp\u003eProperly applied, this ceramic coating advertises multi-year durability and sustained hydrophobic performance, with many users reporting years of protection depending on conditions. Maintenance is straightforward: regular washing with pH-neutral shampoo and avoiding abrasive cleaners preserves the coating's longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for multi-year protection when applied to a prepped surface\u003c\/li\u003e\n  \u003cli\u003eSimple upkeep: routine wash with gentle soap and soft microfiber towels\u003c\/li\u003e\n  \u003cli\u003ePeriodic inspection and light maintenance washes keep hydrophobic properties strong\u003c\/li\u003e\n  \u003cli\u003eReapplication only needed after significant wear or professional inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces can I treat and what prep does it need?\u003c\/h3\u003e\n\u003cp\u003eThis product bonds to automotive clearcoats, gelcoat on boats, powder-coated metal, and painted surfaces on RVs and motorcycles. For best results, remove contaminants and correct paint defects before application so the coating bonds evenly and lasts to its full potential.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for cars, trucks, boats, RVs, and motorcycles\u003c\/li\u003e\n  \u003cli\u003eRequires thorough wash, clay bar decontamination, and paint correction if necessary\u003c\/li\u003e\n  \u003cli\u003eApplication best with a dual-action polisher or steady hand using supplied applicator\u003c\/li\u003e\n  \u003cli\u003eCures chemically—avoid water and heavy contact during initial cure window\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply it safely and get a consistent finish?\u003c\/h3\u003e\n\u003cp\u003eApplication involves working on a cool surface in a controlled environment, applying small, even panels, and removing any residue before full cure. Follow the product's timing guidelines for flash and wipe-off to avoid streaking or high spots.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWork in shaded, dust-free area with ambient temperatures per product instructions\u003c\/li\u003e\n  \u003cli\u003eApply thin, uniform coats in small sections to ensure complete leveling\u003c\/li\u003e\n  \u003cli\u003eWipe off haze with a clean microfiber within the recommended flash time\u003c\/li\u003e\n  \u003cli\u003eAllow full chemical cure before exposing to water or heavy use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you demand long-term, high-gloss protection with a modern aesthetic twist, Adam's Polishes UV Graphene Ceramic Coating is built for car enthusiasts, professional detailers, and owners of marine and recreational vehicles who want to preserve finish quality while adding durable hydrophobic performance. Choose this coating when you have prepped paint or gelcoat and want a durable, professional-level shield that also delivers a unique UV-reactive visual effect.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I apply this coating myself or should a pro do it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: DIY application is possible with proper prep and a controlled workspace, but professional installation yields the most consistent, long-lasting results.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can wash my vehicle after application?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Avoid washing for at least 24–48 hours; full chemical cure may take longer depending on conditions—follow product instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Adam's Polishes","offers":[{"title":"Default Title","offer_id":67584944242873,"sku":"B08CNMR72K","price":322.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/adams-polishes-uv-graphene-front-label.jpg?v=1790460316"},{"product_id":"salt-shift-chassis-flusher-kit-magnetic-underbody-washer-with-adjustable-mixer-garden-hose-compatible-australian-made","title":"Salt Shift Chassis Flusher Kit — Magnetic Underbody Washer with Adjustable Mixer, Garden-Hose Compatible, Australian Made","description":"\u003cp\u003e\u003cstrong\u003eThe Salt Shift Chassis Flusher Kit is a magnetic, garden-hose-compatible undercarriage wash system plus eco-friendly concentrate that securely cleans and helps protect off-road chassis, truck frames and trailers from salt, mud and grime.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep the vulnerable frame, suspension and underbody components of your 4WD, ute, truck or trailer cleaner for longer with a purpose-built flusher that clips on and sprays into hard-to-reach rails. This Australian-made kit combines a magnetic flusher canister, adjustable concentrate mixer, extension hose and a biodegradable corrosion-inhibiting wash so you can rinse, dilute and treat chassis rails quickly without special tools or a pressure washer.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the magnetic flusher attach and work on my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe magnetic canister secures to accessible chassis rails, creating a hands-free spray point that directs fluid into cavities and along frame members. It uses water pressure from a garden hose to distribute the diluted cleaner evenly, simplifying underbody maintenance after salt exposure or off-road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStrong magnet holds to steel chassis for stable, hands-free operation\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play garden hose connection — no pumps or batteries\u003c\/li\u003e\n  \u003cli\u003eAdjustable mixer dial lets you control concentrate ratio on the fly\u003c\/li\u003e\n  \u003cli\u003eExtension hose reaches across wheels and around obstacles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the included wash do and is it environmentally safe?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a pH-neutral, biodegradable chassis and undercarriage wash formulated to lift salt, mud, oil and grime without harsh phosphates. It breaks contaminants down for rinsing while leaving corrosion-inhibiting components to help reduce long-term rust risk when used as part of routine maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBiodegradable, phosphate-free and pH-neutral formulation\u003c\/li\u003e\n  \u003cli\u003eDesigned to loosen salt and grime for effective rinsing\u003c\/li\u003e\n  \u003cli\u003eCorrosion-inhibiting additives to aid protection after cleaning\u003c\/li\u003e\n  \u003cli\u003eSafe for use around painted surfaces and suspension components when rinsed off\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my vehicle and how easy is setup?\u003c\/h3\u003e\n\u003cp\u003eThe Salt Shift Chassis Flusher Kit is made for universal fitment across most 4WDs, SUVs, trailers, boats and light trucks. Setup is straightforward: mount the magnetic flusher, attach the extension hose and garden-hose adapter, set the dilution level, then start rinsing—no specialised fittings or tools required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal hose adapter compatible with standard garden hoses\u003c\/li\u003e\n  \u003cli\u003eAdjustable concentrate canister for different vehicle sizes and soils\u003c\/li\u003e\n  \u003cli\u003eCompact kit components store easily in a ute or shed\u003c\/li\u003e\n  \u003cli\u003eEngineered for marine and off-road environments from Australian testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can regular chassis flushing save me time and money?\u003c\/h3\u003e\n\u003cp\u003eRoutine undercarriage washes remove corrosive salts and trapped debris that accelerate rust, lowering the chance of costly frame, bolt or suspension repairs. Clean underbodies are also easier to inspect, which helps spot worn parts early and supports resale value by proving better maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemoves salt and grime that promote corrosion\u003c\/li\u003e\n  \u003cli\u003eMakes visual inspections quicker and more reliable\u003c\/li\u003e\n  \u003cli\u003eHelps protect suspension components and mounts from accelerated wear\u003c\/li\u003e\n  \u003cli\u003eSupports higher resale value through documented care\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: The Salt Shift Chassis Flusher Kit suits 4WD owners, tradies, boat owners, caravan and trailer users, and anyone who drives on salted roads or off-road tracks and wants a simple, eco-friendlier way to flush chassis rails and undercarriage areas. If you need a portable, tool-free wash system that pairs with an ordinary garden hose and includes a corrosion-aware cleaner, this kit delivers a practical maintenance solution engineered in Australia.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the flusher with any garden hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit uses a standard garden-hose connection compatible with common backyard hose fittings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the included wash safe for the environment?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The wash is biodegradable, pH-neutral and phosphate-free, designed as an eco-safer option for undercarriage cleaning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Salt Shift","offers":[{"title":"Default Title","offer_id":67584945848505,"sku":"B0DGPWNTX6","price":238.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/salt-shift-front-packaging.jpg?v=1790460407"},{"product_id":"adams-polishes-uv-graphene-10h-ceramic-coating-kit-7-year-hydrophobic-gloss-uv-trace-no-flashlight","title":"Adam's Polishes UV Graphene 10H Ceramic Coating Kit – 7+ Year Hydrophobic Gloss, UV Trace (No Flashlight)","description":"\u003cp\u003e\u003cstrong\u003eAdam's UV Graphene Ceramic Coating Kit provides a long-lasting 10H ceramic barrier with UV tracing so you can apply a mirror-like, hydrophobic finish that lasts 7+ years.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines a graphene-enhanced ceramic formula with Adam’s patent-pending UV tracing technology so hobbyists and pros can see exactly where the coating has been applied. The product is designed to bond to paint and clearcoat surfaces after proper wash, clay, and polish prep, delivering improved gloss, water-beading, and resistance to everyday contaminants. The kit excludes the UV flashlight but retains the coating’s UV-reactive tracer for confident coverage under black light tools you may already own or choose to purchase separately.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coating protect paint during everyday driving?\u003c\/h3\u003e\n\u003cp\u003eThe graphene-infused ceramic forms a thin, hard layer that resists water, road grime, and common environmental fallout. It reduces surface adhesion of contaminants and helps prevent micro-abrasions during routine washes when used with safe washing methods.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10H hardness rating for improved scratch resistance under normal wear.\u003c\/li\u003e\n  \u003cli\u003eGraphene molecules enhance durability and thermal stability.\u003c\/li\u003e\n  \u003cli\u003eHydrophobic surface makes cleaning faster and reduces staining.\u003c\/li\u003e\n  \u003cli\u003eChemical resistance to mild automotive contaminants and acids.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat steps are needed for a correct application?\u003c\/h3\u003e\n\u003cp\u003ePreparation is the most important factor for a durable bond: wash, decontaminate with clay, and polish to remove defects, then use the included surface prep to strip residues. Apply thin, even panels, allow the proper flash time per instructions, then level and cure as directed for optimal hardness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThorough wash and clay bar to remove bonded contaminants.\u003c\/li\u003e\n  \u003cli\u003ePolish to correct surface imperfections before coating.\u003c\/li\u003e\n  \u003cli\u003eUse the supplied surface prep to remove waxes or sealants.\u003c\/li\u003e\n  \u003cli\u003eApply in controlled temperature\/humidity for best cure and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will I know I covered the entire surface without the included UV light?\u003c\/h3\u003e\n\u003cp\u003eAdam’s UV Graphene Coating uses a UV-reactive tracer to reveal coated areas under a black light; although this kit does not include the flashlight, any compatible UV lamp will highlight the tracer. When viewed under UV, properly treated areas glow and show continuous coverage, helping you correct missed spots before curing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV tracer shows up under black light for full-coverage verification.\u003c\/li\u003e\n  \u003cli\u003eUse a handheld UV lamp or shop black light to inspect panels.\u003c\/li\u003e\n  \u003cli\u003eInspect seams, edges, and vertical surfaces where pooling can occur.\u003c\/li\u003e\n  \u003cli\u003eRemove or level high spots before full cure to prevent streaking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does the protection last and what maintenance is required?\u003c\/h3\u003e\n\u003cp\u003eWhen applied correctly, the coating offers multi-year protection and maintains gloss and water beading for 7+ years under normal conditions. Regular maintenance washes with pH-neutral shampoo, occasional mechanical decontamination if needed, and avoiding abrasive polishes will prolong the finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExpected longevity of 7+ years with proper prep and care.\u003c\/li\u003e\n  \u003cli\u003eRoutine two-bucket wash method to preserve the coating.\u003c\/li\u003e\n  \u003cli\u003eUse non-abrasive maintenance products to avoid wearing the layer.\u003c\/li\u003e\n  \u003cli\u003eRe-inspect annually and recoat high-wear areas if necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This kit is made for detailers and committed enthusiasts who want a high-gloss, durable ceramic barrier that highlights coverage with UV tracing. It suits owners of cars, boats, RVs, and motorcycles who will perform thorough surface prep and follow application instructions to achieve professional-grade results. If you prefer a tool-free, short-term sealant, a different product may be more convenient; however, for maximum durability, hardness, and hydrophobic performance, Adam’s UV Graphene Ceramic Coating Kit is engineered to deliver long-term protection and showroom-level shine.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include the UV flashlight?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — this version excludes the UV flashlight; any compatible black light can reveal the tracer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I apply the coating myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — with proper wash, clay, polish preparation and following directions, DIY application is achievable.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Adam's Polishes","offers":[{"title":"Default Title","offer_id":67584947159225,"sku":"B08DHRPTZ1","price":296.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/adams-front-packaging.jpg?v=1790460486"},{"product_id":"3m-perfect-it-gelcoat-heavy-cutting-compound-1-qt-fast-cutting-gelcoat-abrasive-for-boats-removes-oxidation-p800-scratches","title":"3M Perfect-It Gelcoat Heavy Cutting Compound 1 Qt — Fast-Cutting Gelcoat Abrasive for Boats, Removes Oxidation \u0026 P800 Scratches","description":"\u003cp\u003e\u003cstrong\u003e3M Perfect-It Gelcoat Heavy Cutting Compound (1 qt) is a fast-cutting gelcoat compound that removes oxidation, P800-and-finer scratches, scuffs and surface blemishes while leaving a high-gloss finish ready for polishing and waxing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for professional and industrial use, this heavy cutting compound is formulated specifically for gelcoat surfaces on boats, personal watercraft and other fiberglass items. It combines aggressive cutting power with controlled abrasives so technicians can quickly remove weathering and light-to-moderate surface damage without excessive heat or swirl marks. After compounding, the surface is left with a refined gloss that reduces the time needed for subsequent polishing steps.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly does this compound remove oxidation and scratches?\u003c\/h3\u003e\n\u003cp\u003eThis product is optimized for speed on gelcoat: it removes oxidation and P800-or-finer sanding marks much faster than general-purpose polishes. Because it uses a heavy-cut abrasive matrix, it shortens compounding time while maintaining a finish that responds well to a follow-up polish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulation: aggressive gelcoat-specific abrasives for rapid material removal.\u003c\/li\u003e\n  \u003cli\u003eScratch removal: designed to eliminate scratches as fine as those left by P800 grit.\u003c\/li\u003e\n  \u003cli\u003eOxidation: lifts chalky, weathered layers without excessive rubbing.\u003c\/li\u003e\n  \u003cli\u003eFinish readiness: leaves gloss suitable for a cutting polish or wax.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and technique work best with this 1-quart compound?\u003c\/h3\u003e\n\u003cp\u003eFor consistent, efficient results use a variable-speed polisher with a medium-hard foam or wool cutting pad. Work in overlapping passes at moderate speed, keep the pad flat, and avoid high-speed dwell that can generate heat. Clean residue between passes to inspect progress and prevent trapping removed particles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended tools: random-orbit or rotary polisher, medium-hard foam or wool pad.\u003c\/li\u003e\n  \u003cli\u003eApplication: apply modest amount on pad or surface, spread at low speed, then increase speed.\u003c\/li\u003e\n  \u003cli\u003eInspection: wipe off residue and check finish before final polishing step.\u003c\/li\u003e\n  \u003cli\u003eCleanup: remove compound residue prior to polishing\/waxing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this compound damage gelcoat or create swirl marks?\u003c\/h3\u003e\n\u003cp\u003eUsed as intended by trained technicians, the compound removes surface defects without unnecessary material removal; proper pad selection and polishing technique minimize swirl marks. It’s formulated to cut aggressively while balancing abrasive size and binder so the remaining surface polishes to a high gloss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRisk management: avoid excessive pressure and high RPMs to limit heat buildup.\u003c\/li\u003e\n  \u003cli\u003ePad choice: match pad firmness to surface condition for controlled cutting.\u003c\/li\u003e\n  \u003cli\u003eStep system: follow with a finishing polish to remove any minor micro-marring.\u003c\/li\u003e\n  \u003cli\u003eIndustrial guidance: intended for professional\/occupational use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much product is needed for a typical gelcoat repair?\u003c\/h3\u003e\n\u003cp\u003eCoverage depends on surface condition and technique; a quart supplies enough compound for multiple medium-sized hull corrections or several smaller touch-ups. Professionals typically dispense small quantities per section to maintain pad efficiency and reduce waste.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eYield: one quart covers numerous localized repairs or several panel refurbishments.\u003c\/li\u003e\n  \u003cli\u003eUsage tip: apply in small dots across the work area to avoid overuse.\u003c\/li\u003e\n  \u003cli\u003eStorage: reseal container after use to preserve compound consistency.\u003c\/li\u003e\n  \u003cli\u003eEconomy: faster cutting reduces total product consumption versus slower polishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: 3M Perfect-It Gelcoat Heavy Cutting Compound is intended for marine refinishers, boatyards, professional detailers and industrial technicians who need a fast, gelcoat-specific abrasive to restore fiberglass surfaces. It is formulated for trained users in occupational settings and is not for consumer retail use. If you manage gelcoat restoration projects and require predictable, high-speed correction that leaves a polish-ready gloss, this 1-quart professional compound is a practical choice.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFeature note: for industrial\/occupational use only — not for consumer sale or use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this compound on non-gelcoat surfaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s formulated for gelcoat and fiberglass; test on inconspicuous area first and consult 3M guidance before using on other substrates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a specific pad for best results?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a medium-hard foam or wool cutting pad with a variable-speed polisher for optimal cut and control.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":67584950206649,"sku":"B01MU1C9DW","price":185.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/3m-perfect-it-gelcoat-front-packaging.jpg?v=1790460653"},{"product_id":"chemical-guys-torqx-random-orbital-polisher-kit-9-piece-8mm-dual-action-800w-motor-for-paint-correction","title":"Chemical Guys TORQX Random Orbital Polisher Kit, 9-Piece — 8mm Dual-Action, 800W Motor for Paint Correction","description":"\u003cp\u003e\u003cstrong\u003eThe Chemical Guys TORQX Random Orbital Polisher Kit is a nine-piece detailing system that combines a balanced 8mm dual-action polisher with pads and polishes so hobbyists and pros can remove defects and restore glossy finishes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit brings together the TORQX dual-action machine plus a backing plate, foam pads, and stepwise compounds and polishes so you can move from heavy correction to final finishing without extra purchases. Built to be user-friendly yet capable, the TORQX offers a predictable orbital motion and an ergonomic build to help you polish larger panels or small details with control and reduced fatigue.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TORQX help correct scratches and swirls?\u003c\/h3\u003e\n\u003cp\u003eThe TORQX uses an 8mm orbital throw and a powerful motor to reshape and refine clear coat without producing heat concentrations that cause burning or holograms. Its balanced action disperses abrasive work across the pad surface, which makes defect removal efficient while reducing the risk of further harm to the paint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8mm dual-action orbit for balanced cut and finish\u003c\/li\u003e\n  \u003cli\u003e700W motor provides consistent power for correction\u003c\/li\u003e\n  \u003cli\u003eIncluded compounds and polishes for staged defect removal\u003c\/li\u003e\n  \u003cli\u003eSuitable for swirl marks, light scratches, oxidation, and haze\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features make it comfortable and easy to use for long sessions?\u003c\/h3\u003e\n\u003cp\u003eErgonomics and weight distribution were prioritized so users can maintain steady pressure and reach awkward angles without tiring quickly. Intuitive controls let you adjust speed and keep the pad moving smoothly, which is especially helpful for first-time machine polishers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight construction and ergonomic grip for reduced fatigue\u003c\/li\u003e\n  \u003cli\u003eSimple speed control for gradual learning and precise work\u003c\/li\u003e\n  \u003cli\u003eBalanced head design helps maintain pad contact and stability\u003c\/li\u003e\n  \u003cli\u003eEasy-to-mount backing plate for quick pad changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this kit be used beyond paintwork?\u003c\/h3\u003e\n\u003cp\u003eYes—the TORQX is versatile enough for headlights, clear plastics, and some wheel surfaces when paired with the appropriate pad and polish. Always test an inconspicuous area first and use recommended polishing products for non-painted substrates to avoid unwanted abrasion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe use on headlights and clear plastics with light polishing steps\u003c\/li\u003e\n  \u003cli\u003eWorks on wheels with careful product and pad selection\u003c\/li\u003e\n  \u003cli\u003eProvides surface refinement for trim and metal when suitable compounds used\u003c\/li\u003e\n  \u003cli\u003eIncludes pads and polishes formulated for different correction stages\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes included and how does the kit support a full detailing workflow?\u003c\/h3\u003e\n\u003cp\u003eThe nine-piece kit bundles the TORQX machine with a backing plate, a set of foam pads, and a selection of chemical formulas designed for cutting, polishing, and finishing. The curated sequence of pads and polishes lets you progress from aggressive correction to glossy refinement without sourcing separate items.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTORQX dual-action polisher with reliable motor performance\u003c\/li\u003e\n  \u003cli\u003eBacking plate that accepts the supplied foam pads\u003c\/li\u003e\n  \u003cli\u003eMultiple foam pads for compounding, polishing, and finishing steps\u003c\/li\u003e\n  \u003cli\u003eCompounds and polishes tailored for staged paint restoration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Chemical Guys TORQX Random Orbital Polisher Kit is designed for car owners who want a single kit to learn machine polishing, enthusiasts who maintain their own vehicles, and detailers needing a compact, versatile polisher for occasional professional work. It's well suited to address light-to-moderate paint correction, headlight restoration, and routine gloss maintenance on cars, trucks, motorcycles, and RVs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the TORQX safe for beginner users?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The TORQX’s dual-action orbit and ergonomic controls reduce risk and make it approachable for beginners when using recommended pads and speeds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit remove deep scratches?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It removes light-to-moderate scratches and swirls; deep clear coat or primer-level scratches may need professional repair.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Chemical Guys","offers":[{"title":"Default Title","offer_id":67584950501561,"sku":"B01BKT63XM","price":499.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/chemical-guys-torqx-front-view.jpg?v=1790460677"},{"product_id":"meguiars-m100-pro-speed-compound-1-gal-fast-cut-polishing-compound-for-sanding-marks-heavy-swirls","title":"Meguiar's M100 Pro Speed Compound 1 gal — fast-cut polishing compound for sanding marks \u0026 heavy swirls","description":"\u003cp\u003e\u003cstrong\u003eMeguiar's M100 Pro Speed Compound is a professional fast-cut polishing compound that removes sanding marks, heavy swirls, and severe paint defects to restore a deep, showroom-quality gloss.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle has 1200-grit or finer sanding marks, heavy swirl marks, acid rain etching, or holograms marring the finish, this one-gallon body-shop-safe formula is engineered to cut aggressively yet leave a surface ready for finer polishing. Designed for use by hand, dual-action polishers or rotary buffers, M100 is part of Meguiar’s Mirror Glaze line and delivers reliable, repeatable defect removal across glossy and clear coat paints.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will M100 remove sanding marks and heavy swirls?\u003c\/h3\u003e\n\u003cp\u003eM100 is formulated for ultra-fast cutting performance so you can remove 1200-grit or finer sanding marks and moderate-to-heavy swirl patterns far faster than softer polishes. On a rotary or with the right pad and speed, you’ll see color uniformity and defect reduction within a few passes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemoves sanding marks down to 1200 grit\u003c\/li\u003e\n  \u003cli\u003eWorks for acid rain etching, holograms and deep swirls\u003c\/li\u003e\n  \u003cli\u003eFast-cut abrasive system for fewer passes\u003c\/li\u003e\n  \u003cli\u003eSuitable for both fresh and cured paint surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use M100 on clear coats and different paint types?\u003c\/h3\u003e\n\u003cp\u003eYes — M100 is safe on all glossy topcoats, including modern clear coats. Its abrasive profile was developed to cut effectively without compromising clearcoat integrity when applied correctly by hand or machine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClear coat safe when used as directed\u003c\/li\u003e\n  \u003cli\u003eCompatible with single-stage and multi-stage finishes\u003c\/li\u003e\n  \u003cli\u003eApply carefully on thin or heavily oxidized areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tools and pads give the best results with Meguiar’s M100?\u003c\/h3\u003e\n\u003cp\u003eM100 was formulated to perform with rotary buffers, dual-action polishers, and even by hand for spot repairs. Choose a cutting or medium-cut foam pad for aggressive defect removal, then follow with a finishing polish and softer pad to refine gloss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRotary buffer for maximum cutting power\u003c\/li\u003e\n  \u003cli\u003eDual-action polisher for control and safety on delicate panels\u003c\/li\u003e\n  \u003cli\u003eMedium-cut foam pads for balanced removal and finish\u003c\/li\u003e\n  \u003cli\u003eFollow with a fine polish and finishing pad for mirror shine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat steps should I follow to get the best finish?\u003c\/h3\u003e\n\u003cp\u003eStart by thoroughly washing and decontaminating the surface. Work a 2x2 foot panel with moderate pressure and overlapping passes until defects diminish; remove residue and evaluate under proper lighting before moving to the next step.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWash and clay bar to remove contaminants\u003c\/li\u003e\n  \u003cli\u003eTest on a small panel to dial pad, speed, and pressure\u003c\/li\u003e\n  \u003cli\u003eWork in sections, clean residues, then inspect in bright light\u003c\/li\u003e\n  \u003cli\u003eFinish with a fine polish and protection layer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Meguiar’s M100 Pro Speed Compound is aimed at body shop technicians, experienced detailers, and dedicated enthusiasts who need a reliable, high-cut compound for restoring heavily marred paint. If you’re restoring panels after sanding, eliminating severe swirls, or prepping panels for show-level finishing, this formula gives the aggressive cutting power required while remaining safe for modern clear coats when used properly. Backed by Meguiar’s long-standing industry expertise, M100 provides a proven professional-grade step in a multi-stage paint correction process.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is M100 safe on modern clear coats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. M100 is formulated to be clear-coat safe when used correctly with appropriate pads and techniques.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use M100 with a dual-action polisher?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Absolutely. M100 works with rotary, dual-action polishers, or by hand for spot repairs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Meguiar's","offers":[{"title":"Default Title","offer_id":67584954564793,"sku":"B00AIYDP2S","price":184.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/meguiars-m100-front-gallon-bottle.jpg?v=1790460835"},{"product_id":"zephyr-ultra-shine-aluminum-polishing-kit-for-forged-wheels-3-step-10-buffs-16-oz-pro-25-polish","title":"Zephyr Ultra Shine Aluminum Polishing Kit for Forged Wheels — 3‑Step, 10\" Buffs \u0026 16 oz Pro 25 Polish","description":"\u003cp\u003e\u003cstrong\u003eZephyr Ultra Shine is a complete three-step aluminum and stainless wheel polishing kit designed to produce a deep, mirror-like finish on forged wheels, lifted truck rims, and custom metal parts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one polishing system pairs three 10\" airway buffing wheels with matched compounds, a safety flange set, a 2\" tapered cotton shank for tight areas, and a 16 oz. bottle of Pro 25 metal polish. Built for durability and user-friendly DIY use, the kit balances aggressive cutting power for pitting and oxidation with refined polishing stages to deliver showroom-level gleam without frequent shop visits.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the three-step polishing system transform rough wheel surfaces?\u003c\/h3\u003e\n\u003cp\u003eThe kit’s sequential approach moves from material removal to smoothing and finally to high-gloss refinement, so you address corrosion and scratches before enhancing shine. Each buff is designed to work with its corresponding compound for predictable, repeatable results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStep 1: Coarser 10\" buff with cutting compound to remove oxidation and deep defects.\u003c\/li\u003e\n  \u003cli\u003eStep 2: Medium polishing wheel with smoothing compound to blend and refine surfaces.\u003c\/li\u003e\n  \u003cli\u003eStep 3: Fine airway wheel with final polish to create a mirror-like reflection.\u003c\/li\u003e\n  \u003cli\u003eIncludes safety flange set to secure wheels for stable, safe operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I reach tight seams, bolt pockets, and detailed cast areas?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit includes a 2\" tapered cotton shank mounted buff that fits common 1\/4\" and 3\/8\" chucks, specifically for contours, edges, and recesses larger wheels can’t access. Use this shank with the supplied Pro 25 polish for consistent small-area finishing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTapered 2\" cotton shank for precision work in lug wells and creases.\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard drill and rotary chucks for flexible tool setups.\u003c\/li\u003e\n  \u003cli\u003e16 oz. Pro 25 polish provides enough product for multiple wheels and touch-ups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this kit suitable for forged wheels and lifted truck rims?\u003c\/h3\u003e\n\u003cp\u003eThe Ultra Shine kit is formulated to handle the larger diameters and heavier-duty finishes common on lifted trucks and forged wheels. It’s strong enough to cut through oxidation yet controlled enough to preserve custom finishes when used correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree 10\" airway buffing wheels sized for large-diameter rims and exposed surfaces.\u003c\/li\u003e\n  \u003cli\u003eCompound bars matched to each buff reduce guessing and speed the workflow.\u003c\/li\u003e\n  \u003cli\u003eMade in the USA and engineered with long-term, repeatable performance in mind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Zephyr Ultra Shine is aimed at DIY enthusiasts, fleet owners, and custom builders who want professional-level aluminum and stainless polishing without subcontracting the work. If you maintain lifted trucks, forged wheels, custom trailers, or billet accessories and need a predictable, shop-quality finish at a cost-effective price, this kit equips you with the tools and polish to restore and maintain gleaming metal surfaces at home or in the shop.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does one kit last for a set of four wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usage varies, but typically the kit covers multiple full sets; expect several complete wheel jobs before replacing compounds or buffs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit damage clear-coated or painted wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit is intended for bare aluminum or stainless finishes; avoid using on clear-coated or painted surfaces to prevent damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Zephyr","offers":[{"title":"Default Title","offer_id":67584967901369,"sku":"B07CQ5P94W","price":317.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/zephyr-ultra-shine-kit-box-front.jpg?v=1790461376"},{"product_id":"poli-glow-deluxe-boat-rv-restoration-kit-6-in-1-fiberglass-gelcoat-system-with-liquid-poli-ox-and-sealant","title":"Poli Glow Deluxe Boat \u0026 RV Restoration Kit — 6-in-1 Fiberglass \u0026 Gelcoat System with Liquid Poli Ox and Sealant","description":"\u003cp\u003e\u003cstrong\u003ePoli Glow® Deluxe Boat \u0026amp; RV Restoration Kit is a complete 6-in-1 system that removes heavy oxidation and seals fiberglass and gelcoat to restore deep gloss and long-lasting protection in a single project.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether your boat or RV shows faded color, chalking, or surface dullness, this kit brings together polishing, oxidation removal, surface prep, and sealing products designed specifically for fiberglass and gelcoat. The kit pairs the new Liquid Poli Ox with Poli Glow restoration cream, Poli Prep cleaner, applicators, and clear instructions so you can perform a professional-grade restoration without specialty tools or extensive experience.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit remove heavy oxidation without compounding?\u003c\/h3\u003e\n\n\u003cp\u003eThe system relies on a sequence of proprietary cleaners and polymer-based restorers that lift oxidation and rebuild surface gloss rather than relying on abrasive compounding alone. Liquid Poli Ox loosens oxidation for easy removal, while the Poli Glow finish bonds to the surface and produces a durable high-gloss layer.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLiquid Poli Ox: dissolves oxidation for faster cleanup\u003c\/li\u003e\n  \u003cli\u003ePoli Prep: degreases and prepares the surface for optimal adhesion\u003c\/li\u003e\n  \u003cli\u003ePoli Glow: seals and builds a long-lasting acrylic polymer finish\u003c\/li\u003e\n  \u003cli\u003eIncluded applicators: promote even coverage and consistent results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the finish last longer than traditional wax?\u003c\/h3\u003e\n\n\u003cp\u003eYes — Poli Glow is designed as a polymer restoration and sealant, not a simple wax layer. Its formulation creates a more resilient coating that resists UV degradation and environmental wear better than conventional paste or liquid waxes, giving extended gloss retention with simple maintenance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePolymer-based sealant vs. typical wax\u003c\/li\u003e\n  \u003cli\u003eBuilt-in UV inhibitors to slow sun damage\u003c\/li\u003e\n  \u003cli\u003eResistance to salt and environmental contaminants\u003c\/li\u003e\n  \u003cli\u003eMaintenance schedule: monthly or as needed for peak gloss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use this kit on a weekend project?\u003c\/h3\u003e\n\n\u003cp\u003eThe Deluxe kit is assembled for do-it-yourself use: step-by-step instructions, hand-friendly applicators, and a liquid oxidation remover make the process straightforward. No power buffers or advanced techniques are required for many jobs; hand application produces significant improvement and professional appearance when followed carefully.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClear instructions included for each step\u003c\/li\u003e\n  \u003cli\u003eHand applicators for even application and control\u003c\/li\u003e\n  \u003cli\u003eWorks with or without a polishing tool depending on condition\u003c\/li\u003e\n  \u003cli\u003eSuitable for spot repairs and full-surface restorations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and conditions is the kit formulated for?\u003c\/h3\u003e\n\n\u003cp\u003eThis restoration system was developed specifically for fiberglass and gelcoat finishes commonly found on boats and RVs. It addresses heavy oxidation, chalking, color loss, and surface dullness, restoring depth and shine while sealing the surface to slow future deterioration.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFiberglass hulls, decks, and topsides\u003c\/li\u003e\n  \u003cli\u003eGelcoat surfaces on boats and RV exterior panels\u003c\/li\u003e\n  \u003cli\u003eFaded, chalked, or weathered finishes\u003c\/li\u003e\n  \u003cli\u003eNot intended for painted metal or bare wood without testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Poli Glow Deluxe Boat \u0026amp; RV Restoration Kit is intended for boat and RV owners, marina operators, and maintenance professionals who want a reliable, all-in-one restoration solution. It’s especially useful for people who prefer a DIY approach but expect durable, showroom-quality results—those restoring older fiberglass or maintaining newer gelcoat to extend its life and shine.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this kit by hand or do I need a buffer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can achieve strong results by hand with included applicators; a buffer speeds work on very large areas but isn’t required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Poli Glow safe for all gelcoat colors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the formula is designed for fiberglass and gelcoat finishes and restores color without altering original pigmentation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Poli Glow","offers":[{"title":"Default Title","offer_id":67584969703609,"sku":"B0GLTDPD4Z","price":317.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/poli-glow-front-packaging.jpg?v=1790461404"},{"product_id":"ethos-handcrafted-car-care-graphene-spray-coating-for-cars-gallon-extreme-hydrophobic-protection-high-gloss","title":"Ethos Handcrafted Car Care Graphene Spray Coating for Cars — Gallon, Extreme Hydrophobic Protection \u0026 High Gloss","description":"\u003cp\u003e\u003cstrong\u003eEthos RESIST Graphene Spray Coating is a hybrid graphene + ceramic spray that delivers long-lasting hydrophobic protection and high-gloss enhancement with a spray-and-wipe application.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for detailers and car owners who want the protection and shine of a ceramic coating without professional prep or complicated curing, Ethos RESIST blends reduced graphene oxide (rGO) and SiO2 into a user-friendly spray. The formula acts as a stand-alone protective layer or as a booster over existing coatings, combining enhanced water beading with durable gloss to keep painted surfaces cleaner and brighter between washes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this graphene spray improve water beading and dirt repellency?\u003c\/h3\u003e\n\n\u003cp\u003eEthos RESIST uses graphene’s molecular structure together with silica to create a slick, low-surface-energy film on paint and glass. That film encourages water to form tight beads and roll off, carrying away light dirt and contaminants to reduce wash frequency.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGraphene-infused SiO2 network for stronger hydrophobicity\u003c\/li\u003e\n  \u003cli\u003eReduces surface friction to help dirt slide away\u003c\/li\u003e\n  \u003cli\u003eWorks on paint, glass, plastic, and metal for uniform beading\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use the spray myself, and how simple is the application?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the product is formulated as a spray-and-wipe, intended for straightforward DIY use. No torch curing or professional tools are required: spray, spread with a microfiber, and buff for an immediate gloss and protection layer.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eApply to cool, clean surfaces; wipe with a soft microfiber towel\u003c\/li\u003e\n  \u003cli\u003eFast curing at ambient temperatures — no heat lamps needed\u003c\/li\u003e\n  \u003cli\u003eStreak-free finish designed for quick maintenance sessions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does protection last and can it complement existing coatings?\u003c\/h3\u003e\n\n\u003cp\u003eEthos RESIST is engineered to provide durable protection that can last months when applied correctly. It functions both as a stand-alone ceramic-like shield and as a topper to enhance gloss and longevity of existing coatings, extending their water-shedding performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStand-alone durability measured in months under normal conditions\u003c\/li\u003e\n  \u003cli\u003eActs as a maintenance layer over traditional ceramic or polymer coatings\u003c\/li\u003e\n  \u003cli\u003eHelps resist UV degradation, light contaminants, and water spots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the spray safe for all exterior surfaces on my vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eYes — Ethos RESIST is formulated to be safe on painted bodywork, clear coats, automotive glass, plastics, trim, and chrome. It’s suitable for cars, motorcycles, boats, and other vehicles when used as directed, offering consistent protection across mixed surfaces.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSafe for clear coat and factory paint finishes\u003c\/li\u003e\n  \u003cli\u003eCompatible with polycarbonate and automotive glass\u003c\/li\u003e\n  \u003cli\u003eWorks on metal and painted plastic trim without haze\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Ethos RESIST Graphene Spray Coating is ideal for car owners, DIY detailers, and small shops that want a high-gloss, hydrophobic finish without professional ceramic-coating steps. If you value quick upkeep, improved beading, and a visible showroom shine—whether on daily drivers, weekend cars, or marine craft—this gallon-sized option provides enough product to treat multiple vehicles or perform frequent maintenance coats. Follow surface prep recommendations for best results and reapply periodically to maintain peak protection and gloss.\u003c\/p\u003e\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eResist\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can get the full hydrophobic effect?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You’ll see immediate water beading after buffing; full cure and maximum durability develop over 24–48 hours.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can Ethos RESIST be layered over existing ceramic coatings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it can be used as a maintenance topper to enhance gloss and extend water repellency of existing coatings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Ethos Handcrafted Car Care","offers":[{"title":"Default Title","offer_id":67584971440313,"sku":"B09VMJJKVZ","price":240.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ethos-resist-gallon-front-label.jpg?v=1790461502"},{"product_id":"chemical-guys-hydrosuds-ceramic-foaming-car-wash-soap-berry-1-gallon-ph-balanced-ceramic-infused-wash","title":"Chemical Guys HydroSuds Ceramic Foaming Car Wash Soap, Berry 1 Gallon — pH‑Balanced Ceramic-Infused Wash","description":"\u003cp\u003e\u003cstrong\u003eChemical Guys HydroSuds Ceramic Foaming Car Wash Soap (Berry) is a concentrated, high-foaming 1‑gallon wash that cleans and deposits ceramic polymers for added hydrophobic gloss every time you wash.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eHydroSuds blends thick suds with ceramic-infused polymers to both remove dirt and leave a thin, water-repellent layer that beads water and helps repel dust between washes. The pH-balanced formula is designed for frequent use, works with foam cannons, foam blasters, and traditional bucket methods, and is safe on paint, clear coat, glass, chrome, and plastic trim. With a pleasant berry scent and a gallon-sized concentrate, this bottle is intended for detailers, multi-vehicle households, and pro shops that need many washes per container.\u003c\/p\u003e\n\n\u003ch3\u003eHow does HydroSuds add ceramic protection while washing?\u003c\/h3\u003e\n\u003cp\u003eHydroSuds contains ceramic polymers that deposit on exterior surfaces during the wash process, creating a thin hydrophobic layer without a separate coating step. Each wash gradually enhances water beading and surface gloss without interfering with existing waxes or sealants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePolymer particles bond to paint, clear coat, and glass during rinse.\u003c\/li\u003e\n  \u003cli\u003eBuilds incremental hydrophobicity over repeated washes.\u003c\/li\u003e\n  \u003cli\u003eSafe over existing wax, sealants, and ceramic coatings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with my foam cannon or regular bucket wash?\u003c\/h3\u003e\n\u003cp\u003eYes—HydroSuds is formulated to produce thick, clingy foam that performs well in foam cannons, foam blasters, and conventional two-bucket washing. The concentrated gallon yields full foam cannon cycles or bucket loads from a small measured dose, making it economical for routine care.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with garden-hose foam blasters and powered foam cannons.\u003c\/li\u003e\n  \u003cli\u003eGenerates long-lasting suds that lift dirt instead of dragging it.\u003c\/li\u003e\n  \u003cli\u003eDilution guidelines produce dozens of washes per gallon.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs HydroSuds safe for all exterior surfaces and existing coatings?\u003c\/h3\u003e\n\u003cp\u003eThe formula is pH-balanced and designed to clean paint, glass, chrome, polished metals, and plastic trim without stripping previously applied waxes, sealants, or ceramic coatings. It focuses on gentle but effective cleaning, reducing the chance of removing protection you already applied.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003epH-balanced to avoid harsh stripping of protective layers.\u003c\/li\u003e\n  \u003cli\u003eSuitable for multi-surface exterior use, including glass and trim.\u003c\/li\u003e\n  \u003cli\u003eRegular use maintains gloss while building ceramic benefits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much product do I need and what value does the gallon offer?\u003c\/h3\u003e\n\u003cp\u003eThe 1-gallon size is concentrated for frequent washes and multi-vehicle maintenance; a little goes a long way. For enthusiasts and professionals, the gallon reduces cost per wash compared with smaller bottles and supplies enough product for dozens of sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConcentrated dosing stretches each gallon across many wash cycles.\u003c\/li\u003e\n  \u003cli\u003eIdeal for detailers, fleet owners, and homes with several cars.\u003c\/li\u003e\n  \u003cli\u003ePairs well with Chemical Guys foam accessories for best foam coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Chemical Guys HydroSuds Ceramic Foaming Car Wash Soap (Berry, 1 Gallon) is made for anyone who washes cars regularly and wants cleaning plus ongoing ceramic-style hydrophobic benefits in one step. It’s a strong choice for professional detailers, car enthusiasts with multiple vehicles, auto shops that need a cost-effective wash concentrate, and homeowners who favor foam washing and long-lasting water beading. If you want cleaner paint, enhanced gloss, and easier drying from a single product with a pleasant fragrance, this gallon-format wash was designed to deliver repeatable results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can HydroSuds be used on ceramic-coated cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. HydroSuds is pH-balanced and safe to use over existing ceramic coatings without stripping them.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much HydroSuds do I use in a foam cannon?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Dilution varies by cannon, but typically 1–2 ounces per liter of water; follow your device’s recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Chemical Guys","offers":[{"title":"Default Title","offer_id":67584974454969,"sku":"B0GWSDZGB4","price":186.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/chemical-guys-hydrosuds-gallon-front-label.jpg?v=1790461681"},{"product_id":"the-rag-company-ultra-h2o-spray-gun-stainless-steel-pressure-washer-gun-m15-m22-kit-with-rubberized-grip","title":"The Rag Company Ultra H2O Spray Gun – Stainless-Steel Pressure Washer Gun, M15–M22 Kit with Rubberized Grip","description":"\u003cstrong\u003eThe Rag Company Ultra H2O Spray Gun is a purpose-built stainless-steel pressure washer gun engineered for smoother handling, longer life, and quick install with included adapters.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned for car detailers and power-wash enthusiasts, the Ultra H2O Spray Gun replaces fragile, plated-brass internals with full stainless-steel components to resist corrosion and extend service life. Ergonomics and practical features—like an integrated nozzle holder, one-finger trigger lock, and rubberized grips—make long cleaning sessions less fatiguing. The kit ships ready to connect with an M15 to M22 adapter, female hose fitting, autolock quick disconnect, and thread seal tape so you can start using it right away.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Ultra H2O improve pressure-washing control?\u003c\/h3\u003e\n\u003cp\u003eThe gun's shape balances the tool in your hand and the rubberized grip gives slip resistance when wet. A one-finger trigger lock helps you hold a steady spray for longer runs, reducing hand strain and improving finish consistency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eErgonomic pistol profile for balanced handling\u003c\/li\u003e\n  \u003cli\u003eRubberized grips for secure hold with gloves or soap\u003c\/li\u003e\n  \u003cli\u003eOne-finger trigger lock for sustained spraying\u003c\/li\u003e\n  \u003cli\u003eIntegrated nozzle holder keeps accessories accessible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy are stainless steel internals important?\u003c\/h3\u003e\n\u003cp\u003eStainless steel resists rust and wear better than brass or nickel-plated parts commonly used in guns. That means fewer replacements, fewer leaks over time, and a lower chance of contamination when cleaning vehicles or delicate surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless internals resist corrosion in wet environments\u003c\/li\u003e\n  \u003cli\u003eImproved durability under repeated pressure cycles\u003c\/li\u003e\n  \u003cli\u003eLower maintenance and longer usable lifespan\u003c\/li\u003e\n  \u003cli\u003eBetter compatibility with detergents and salt exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe Ultra H2O arrives with the adapters and fittings most professionals need to connect to common hoses and wands. Thread seal tape and an autolock quick disconnect simplify assembly so you can be spraying within minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM15 to M22 adapter for broad pump compatibility\u003c\/li\u003e\n  \u003cli\u003eFemale hose fitting and autolock quick disconnect included\u003c\/li\u003e\n  \u003cli\u003eExtra thread seal tape for leak-free connections\u003c\/li\u003e\n  \u003cli\u003ePre-fitted swivel and fittings for fast setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 360 stainless steel swivel help on the job?\u003c\/h3\u003e\n\u003cp\u003eThe full-rotation swivel lets the hose turn freely at the gun, preventing kinks and reducing torque transferred to your wrist. This improves maneuverability when working around vehicles, boats, or tight corners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e360-degree rotation reduces hose tangles\u003c\/li\u003e\n  \u003cli\u003eSmooth operation for continuous movement without jerking\u003c\/li\u003e\n  \u003cli\u003eMinimizes stress on hose fittings and operator wrist\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard pressure-wash hoses and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Rag Company Ultra H2O Spray Gun is aimed at mobile detailers, professional car shops, and avid weekend cleaners who want a rugged, user-friendly gun that lasts. If you need reliable corrosion resistance, easier handling during extended use, and a kit that works with common fittings out of the box, this gun is engineered to meet those needs without unnecessary complexity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the Ultra H2O fit my pressure washer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—includes an M15 to M22 adapter and common fittings to fit most consumer and professional units.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the gun handle detergents and saltwater?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Stainless steel internals resist corrosion from detergents and salt better than plated brass alternatives.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"The Rag Company","offers":[{"title":"Default Title","offer_id":67584978649273,"sku":"B0H6CJ446F","price":196.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/theragcompany-ultra-h2o-front-view.jpg?v=1790461873"},{"product_id":"chemical-guys-v-line-polish-compound-kit-4-x-16-oz-paint-correction-set-for-heavy-cut-to-ultra-fine-finish","title":"Chemical Guys V Line Polish \u0026 Compound Kit — 4 x 16 oz paint correction set for heavy cut to ultra-fine finish","description":"\u003cp\u003e\u003cstrong\u003eChemical Guys V Line Polish \u0026amp; Compound Kit is a four-step paint correction system that removes defects and builds showroom-level gloss for all paint types.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe V Line Kit (GAP_VKIT_16) bundles four 16 oz formulas—V32, V34, V36, and V38—so you can move from heavy cutting to ultra-refined finishing with one coordinated workflow. Each bottle is formulated to address a specific stage of paint renewal: aggressive cut, medium refinement, light polish, and final finishing. The products are safe for clear coat, single-stage, and ceramic coatings and can be used with dual-action or rotary polishers, or applied by hand for spot-correction jobs.\u003c\/p\u003e\n\n\u003ch3\u003eWhat defects can this kit actually remove?\u003c\/h3\u003e\n\u003cp\u003eThe V Line kit is built to handle a range of surface problems, from deep scratches and heavy oxidation to fine swirl marks and clarity loss. Start with the heavier cutting compounds to remove material and then refine the surface progressively. Final finishing polish restores gloss and optical depth without leaving residue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eV32 for aggressive cutting: deep scratches, heavy swirls, oxidation\u003c\/li\u003e\n  \u003cli\u003eV34 for medium-heavy defects and refinement after aggressive compounding\u003c\/li\u003e\n  \u003cli\u003eV36 for light defect removal and enhanced color clarity\u003c\/li\u003e\n  \u003cli\u003eV38 for final ultra-refined, mirror-like finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use these bottles together for the best results?\u003c\/h3\u003e\n\u003cp\u003eUse the kit as a stepwise process: remove the worst defects first, then progressively switch to milder polishes to refine the finish. Each stage reduces haze and micro-marring left by the previous step until you reach a high-gloss result. Labels guide product order, and the system works with both rotary and dual-action polishers or by hand for smaller spots.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect paint and choose starting compound (V32 for deep problems)\u003c\/li\u003e\n  \u003cli\u003eWork in small panels, narrow passes, and inspect progress often\u003c\/li\u003e\n  \u003cli\u003eMove to V34 then V36 as defects diminish, finish with V38\u003c\/li\u003e\n  \u003cli\u003eWipe panels with a clean microfiber between steps to evaluate clarity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this safe for ceramic coatings, clear coats, and single-stage paint?\u003c\/h3\u003e\n\u003cp\u003eYes—the formulas in this kit are designed to be compatible with a wide range of automotive finishes. When used properly, they correct defects while respecting the underlying clear coat or single-stage paint. For ceramic-coated vehicles, choose less aggressive steps and test in an inconspicuous area first to ensure the coating’s thickness and bond are maintained.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with clear coat, single-stage, and many ceramic-coated surfaces\u003c\/li\u003e\n  \u003cli\u003eUse lighter polish steps or hand application on thin or sensitive clear coats\u003c\/li\u003e\n  \u003cli\u003eAlways test in a small area before full-panel correction\u003c\/li\u003e\n  \u003cli\u003eRinse\/clean and dry the surface before polishing for best adhesion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tools and pads work best with this kit?\u003c\/h3\u003e\n\u003cp\u003eThe V Line products perform well with a variety of pads and machines; match pad aggressiveness to the compound stage. Coarse wool or cutting foam pairs with V32, while medium foam suits V34. Use soft finishing foam or microfiber polishing pads with V36 and V38 for the final clarity and gloss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eV32 + wool or heavy-cut foam for deep defect removal\u003c\/li\u003e\n  \u003cli\u003eV34 + medium-cut foam to refine after heavy compounding\u003c\/li\u003e\n  \u003cli\u003eV36 + soft foam for light defect removal and color clarity\u003c\/li\u003e\n  \u003cli\u003eV38 + finishing foam or microfiber for mirror-like shine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: The Chemical Guys V Line Polish \u0026amp; Compound Kit is suited to experienced DIY detailers, enthusiasts preparing a car for show, and professional detail shops that want a compact, stage-based system. It’s ideal for anyone who needs a complete correction workflow in one purchase—whether you’re restoring neglected paint, maintaining a daily driver, or performing final prep before ceramic sealing or waxing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this kit by hand without a polisher?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. All four formulas can be applied by hand for spot correction, though a polisher speeds results and consistency.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the kit remove deep scratches?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: V32 is formulated for heavy cutting and can significantly reduce deep scratches, but very deep gouges may need touch-up or repainting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Chemical Guys","offers":[{"title":"Default Title","offer_id":67584985006265,"sku":"B00P67GSRG","price":190.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/chemical-guys-v-line-front-packaging.jpg?v=1790462219"},{"product_id":"w-pro100-car-wash-concentrate-4l-touchless-active-foam-cleaner-heavy-duty-alkaline-formula","title":"W Pro100 Car Wash Concentrate 4L - Touchless Active Foam Cleaner, Heavy-Duty Alkaline Formula","description":"\u003cb\u003eW Wash Chems Pro100 is a 4L heavy-duty touchless car wash concentrate that produces active foam to loosen road film, grease, mud and bugs for fast, brush-free cleaning.\u003c\/b\u003e\n\nWash Chems Pro100 is formulated for professional and enthusiast vehicle care where speed and effectiveness matter. This concentrated detergent works as an active foam cleaner with pressure washers, foam cannons or manual foam guns to lift contaminants from painted surfaces, wraps and ceramic coatings when used as directed. The 4L size supplies many washes for home garages, detailing bays or fleet maintenance, and the alkaline blend targets stubborn grime while rinsing away cleanly.\n\n\u003ch3\u003eHow does Pro100 remove road film without scrubbing?\u003c\/h3\u003e\n\u003cp\u003ePro100 uses an active alkaline formulation that penetrates and emulsifies oils, road film and insect residues so they lift off the surface under pressure wash or rinse. The foam stage increases contact time across vertical and horizontal panels, allowing the chemistry to break bonds before rinsing, reducing the need for manual brushing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates thick active foam to cling to surfaces and dissolve grime.\u003c\/li\u003e\n  \u003cli\u003eAlkaline surfactants target grease, tar and bugs.\u003c\/li\u003e\n  \u003cli\u003eRinse-friendly formula designed for pressure washer or foam cannon use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this on wrapped or ceramic-coated vehicles?\u003c\/h3\u003e\n\u003cp\u003eYes—Pro100 is suitable for vinyl wraps and ceramic coatings when applied per instructions and thoroughly rinsed. It is formulated to be powerful enough for heavy soils but still compatible with delicate finishes when diluted correctly and not left to dry on the surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe on wraps and coatings if diluted and rinsed promptly.\u003c\/li\u003e\n  \u003cli\u003eRecommended dilution rates shown on the product label for coated finishes.\u003c\/li\u003e\n  \u003cli\u003eAvoid prolonged dwell times in direct sun to protect delicate films.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat equipment works best with this concentrate?\u003c\/h3\u003e\n\u003cp\u003ePro100 is made for use with foam cannons (both threaded and manual), pressure washers and traditional foam guns attached to garden hoses. It also performs well in commercial touchless bay systems; adjust dilution and nozzle pressure to match your machine for optimal foam density and coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with foam cannons and manual foam guns for thick active foam.\u003c\/li\u003e\n  \u003cli\u003eWorks with pressure washers—adjust PSI and dilution for best results.\u003c\/li\u003e\n  \u003cli\u003eMixable with cold or warm water; follow equipment manufacturer guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow concentrated is the 4L formula and how many washes will it do?\u003c\/h3\u003e\n\u003cp\u003eThe 4L Pro100 concentrate is a high-yield formula intended to dilute for various tasks—from heavy-duty pre-wash to routine maintenance. The exact number of washes depends on application rate, vehicle size and soil level, but the concentrated nature keeps per-wash costs lower than ready-to-use cleaners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConcentrated formula designed for multiple dilution ratios depending on soil level.\u003c\/li\u003e\n  \u003cli\u003eEconomical for individual vehicles and scalable for fleet use.\u003c\/li\u003e\n  \u003cli\u003eStore sealed and away from extreme temperatures to preserve longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nPro100 is aimed at detailers, fleet managers, off-road enthusiasts and anyone who needs a reliable touchless cleaning solution that saves time and reduces physical contact with the vehicle surface. If you run a detailing shop, manage commercial vehicles, or prefer a fast, brush-free wash at home that’s compatible with wraps and coatings, this concentrated 4L cleaner delivers professional-strength results while letting you control dilution and foam application.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Pro100 safe on ceramic coatings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, when diluted and rinsed as directed Pro100 is compatible with ceramic coatings and vinyl wraps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Pro100 with a pressure washer foam cannon?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Pro100 works with foam cannons and pressure washers; adjust dilution and pressure for best foam coverage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"W","offers":[{"title":"Default Title","offer_id":67584996573369,"sku":"B09P4C23JJ","price":194.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/w-pro100-front-label-4l.jpg?v=1790462699"},{"product_id":"adams-polishes-9mm-dual-action-car-polisher-kit-1000w-da-buffer-with-compound-polish-pads","title":"Adam's Polishes 9mm Dual Action Car Polisher Kit — 1000W DA Buffer with Compound, Polish \u0026 Pads","description":"\u003cp\u003e\u003cstrong\u003eAdam's Polishes 9mm Dual Action Car Polisher Kit is a powerful 1000W long-throw DA buffer that corrects paint defects, removes swirls and light scratches, and includes polish, compound and pads to start detailing immediately.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit bundles a high-torque, 9mm orbit dual action (DA) polisher with dedicated compounds, polishing cream, and a selection of pads so you can tackle paint correction, finishing, and maintenance without hunting for separate products. The tool is built for hobbyists and pros who need a reliable balance of power and control for full-vehicle correction, trim and metal polishing, or light interior scrubbing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 9mm orbit help improve finishing?\u003c\/h3\u003e\n\u003cp\u003eThe 9mm long-throw orbit increases the amount of paint surface moved per rotation, so compounds spread and work more uniformly. That orbit improves correction speed while still being safer than rotary machines on sensitive paint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLong 9mm orbit distributes polish evenly across panels\u003c\/li\u003e\n  \u003cli\u003eReduces heat buildup compared with smaller orbits\u003c\/li\u003e\n  \u003cli\u003eBetter coverage per pass, cutting down time on large surfaces\u003c\/li\u003e\n  \u003cli\u003eLess risk of visible swirl marks versus aggressive rotary tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat power and speed control can I expect from this polisher?\u003c\/h3\u003e\n\u003cp\u003eThe motor delivers up to 1000W with variable speed and a max of 6500 OPM, giving strong cutting ability at higher settings and gentle finishing at lower ones. The balance between torque and adjustable speed helps move heavier compounds without bogging the motor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1000W motor for consistent torque under load\u003c\/li\u003e\n  \u003cli\u003eVariable speed control for compound-to-polish transitions\u003c\/li\u003e\n  \u003cli\u003eHigh OPM for effective product displacement and smooth finishes\u003c\/li\u003e\n  \u003cli\u003e16-foot power cord for flexible reach around vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories are included and how do they support the process?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with cutting compound, finishing polish, and multiple pad types so you can start compound cutting and finishing right away. Accessories let you move from defect removal to gloss enhancement without buying separate pads or liquids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCutting compound for oxidation and light scratch removal\u003c\/li\u003e\n  \u003cli\u003eFinishing polish to refine gloss and reduce haze\u003c\/li\u003e\n  \u003cli\u003eAssorted foam and\/or microfiber pads to match cutting and finishing steps\u003c\/li\u003e\n  \u003cli\u003eErgonomic features and a balance block to reduce fatigue during extended use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the design help during long detailing sessions?\u003c\/h3\u003e\n\u003cp\u003eThe polisher focuses on operator comfort and control: rubberized contact points and a balanced housing reduce vibration, while a soft-touch head and compact weight lower fatigue. The machine also stores and handles easily between jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConcave rubber contact zones absorb vibration for better feel\u003c\/li\u003e\n  \u003cli\u003eBalance block and ergonomic grip improve stability and control\u003c\/li\u003e\n  \u003cli\u003eSub-5.5 pound weight eases overhead and long-panel work\u003c\/li\u003e\n  \u003cli\u003eSoft head cover protects surfaces when set down\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Detailers, car enthusiasts, and small-shop professionals who want a single DA polisher that can correct paint, finish panels, and handle light metal or interior work. If you want a capable, easy-to-hold machine with a starter selection of compounds and pads so you can perform both cutting and finishing without assembling multiple tools, this kit is targeted to you.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this polisher remove deep scratches?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It handles light to moderate scratches and swirls; deep gouges may need wet sanding or professional repair.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the kit ready to use out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes the polisher, cutting compound, finishing polish and pads to begin detailing immediately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Adam's Polishes","offers":[{"title":"Default Title","offer_id":67584999030969,"sku":"B09LRHLDGW","price":421.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/adams-polishes-polisher-front-view.jpg?v=1790462828"},{"product_id":"3m-perfect-it-ex-ac-rubbing-compound-1-gallon-fast-cut-aluminum-oxide-formula-for-p1200-scratch-removal","title":"3M Perfect-It EX AC Rubbing Compound 1 Gallon — Fast-Cut Aluminum-Oxide Formula for P1200+ Scratch Removal","description":"\u003cp\u003e\u003cstrong\u003e3M Perfect-It EX AC Rubbing Compound 36061 is a fast-cutting, aluminum-oxide liquid abrasive formulated to remove P1200 or finer sand scratches and leave a refined finish on modern paints and clearcoats.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for professional paint and collision repair shops, this 1-gallon rubbing compound combines aggressive cutting power with controlled finishability. Its formula is engineered to resist sticking, minimize dusting, and perform consistently in varying temperature and humidity conditions, helping technicians move from compounding to final polishing with less cleanup and waste.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will it remove P1200 or finer scratches?\u003c\/h3\u003e\n\u003cp\u003eThe Perfect-It EX AC compound is designed to cut rapidly while producing an even surface ready for polishing. Its aluminum oxide abrasive works uniformly so technicians can remove P1200 and finer sanding marks without overworking the panel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemoves P1200-grade and finer scratches efficiently\u003c\/li\u003e\n  \u003cli\u003eDelivers consistent cut across modern clearcoats\u003c\/li\u003e\n  \u003cli\u003eReduces time spent repeating passes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it stick or leave residue in hot or humid conditions?\u003c\/h3\u003e\n\u003cp\u003eThis formula resists sticking and minimizes powdery residue even under challenging environmental conditions. That means fewer interruptions to scrape or wipe compound build-up, reducing buffing time and material waste.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpecially engineered to resist panel cling\u003c\/li\u003e\n  \u003cli\u003eLess powdering and fewer residue films to clean off\u003c\/li\u003e\n  \u003cli\u003eMore consistent handling in heat or humidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat finishing results can technicians expect before polishing?\u003c\/h3\u003e\n\u003cp\u003eAfter compounding, panels typically display a refined, uniform finish that requires less aggressive polishing to reach final gloss. The compound holds to pads well, reducing sling and improving compound-to-pad contact for uniform abrasion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRefined finish ready for final polish steps\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to compounding pads to limit sling\u003c\/li\u003e\n  \u003cli\u003eUniform abrasion minimizes haloing or uneven spots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should it be used for best efficiency?\u003c\/h3\u003e\n\u003cp\u003eApply a small amount to a compounding pad and work with steady overlapping passes, adjusting speed and pressure for the paint type. Wipe any excess and inspect before moving to a finer polish to avoid unnecessary rework.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse on appropriate compounding pads with moderate speed\u003c\/li\u003e\n  \u003cli\u003eClean pad and panel between stages to prevent contamination\u003c\/li\u003e\n  \u003cli\u003eFollow shop safety and handling procedures for industrial use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: 3M Perfect-It EX AC Rubbing Compound 36061 is formulated for professional body shops, detailers, and refinish technicians working on modern paint systems and clearcoats. It’s intended for industrial or occupational use, providing efficient scratch removal and predictable finishing on painted automotive panels and other coated surfaces. If you need a one-gallon professional-grade compound that combines strong cutting action with reliable handling and minimal residue, this product is tailored to that workflow.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this remove P1500 sanding marks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s formulated to remove P1200 and finer scratches, so P1500 marks can be effectively reduced before final polishing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this product intended for consumer sale?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This rubbing compound is for industrial or occupational use only and not intended for consumer sale or household use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":67585008140473,"sku":"B00LIXEL3U","price":378.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/3m-perfect-it-ex-ac-front-label.jpg?v=1790463309"},{"product_id":"renegade-products-metal-maintenance-bundle-2-x-24oz-pro-red-liquid-ez-red-spray-for-aluminum-stainless-steel-shine","title":"Renegade Products Metal Maintenance Bundle — 2 x 24oz Pro Red Liquid \u0026 EZ Red Spray for Aluminum \u0026 Stainless Steel Shine","description":"\u003cp\u003e\u003cstrong\u003eThe Renegade Metal Maintenance Bundle is a two-step polishing system—Pro Red Liquid Metal Polish and EZ Red Sprayable Polish—designed to remove oxidation and leave aluminum and stainless steel with a showroom-quality shine.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep polished metal surfaces looking like new with a simple, two-product workflow. This kit pairs an aggressive liquid cut compound (Pro Red) for oxidation, stains, and light pitting with a sprayable finishing polish (EZ Red) to eliminate streaks and restore deep clarity. Both bottles are 24 oz, formulated to be used by hand with microfiber or cotton towels so you don’t need power tools to achieve professional results.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the two-step system restore dull or oxidized metal?\u003c\/h3\u003e\n\u003cp\u003eStart with Pro Red to break down and remove built-up oxidation and surface contaminants. Its heavier cut composition lifts tarnish and evens minor surface imperfections; follow with EZ Red to refine the surface and produce a consistent, streak-free luster. The combination balances aggressive cleaning and gentle finishing for visible, long-lasting improvement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePro Red: heavy-cut liquid to remove oxidation and stains\u003c\/li\u003e\n  \u003cli\u003eEZ Red: sprayable fine polish for streak-free clarity\u003c\/li\u003e\n  \u003cli\u003eUse linear motions and microfiber or cotton terry cloth for best results\u003c\/li\u003e\n  \u003cli\u003eWorks without polishing machines—hand-apply for control and safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich metals and surfaces can I safely use these polishes on?\u003c\/h3\u003e\n\u003cp\u003eThe formulas are developed for common vehicle and marine metals: aluminum, stainless steel, and chrome are ideal candidates. They work on fuel tanks, trim, railings, engine covers, headers, and other polished surfaces, but avoid use on painted, anodized, or plated finishes unless the product is tested in an inconspicuous area first. For best results, clean the surface of grit and salt before polishing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable: aluminum, stainless steel, chrome\u003c\/li\u003e\n  \u003cli\u003eCommon uses: fuel tanks, trim, bumpers, marine hardware\u003c\/li\u003e\n  \u003cli\u003ePreparation: wash and remove loose debris before polishing\u003c\/li\u003e\n  \u003cli\u003eTest first on delicate or coated surfaces to confirm compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply Pro Red and EZ Red for a durable, mirror-like finish?\u003c\/h3\u003e\n\u003cp\u003eApply a small amount of Pro Red to a microfiber pad or cotton terry cloth and rub in straight lines to cut through oxidation. Wipe or buff away residues, then spray EZ Red lightly and buff with a clean microfiber towel to refine the shine and remove any streaking. Repeat only where needed; avoid aggressive scrubbing on deep scratches to prevent further abrasion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStep 1: apply Pro Red with cotton or microfiber in linear strokes\u003c\/li\u003e\n  \u003cli\u003eStep 2: remove residue, then apply EZ Red spray and buff clean\u003c\/li\u003e\n  \u003cli\u003eTools: microfiber towels, cotton terry, optional foam pads for tough spots\u003c\/li\u003e\n  \u003cli\u003eDrying: no rinsing required—wipe until surface is glossy and dry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I use this kit to maintain a polished appearance?\u003c\/h3\u003e\n\u003cp\u003eMaintenance frequency depends on exposure: marine and road salt environments may need more frequent attention, while sheltered vehicles require only occasional polishing to retain shine. Use the Pro Red step only when oxidation or visible dulling occurs; EZ Red can be used more often as a quick refresher between heavy treatments. Regular inspections and spot cleaning extend the intervals between full two-step services.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh exposure: monthly or as soon as oxidation appears\u003c\/li\u003e\n  \u003cli\u003eNormal conditions: every few months for upkeep\u003c\/li\u003e\n  \u003cli\u003eQuick touch-ups: EZ Red alone for light streaks or fingerprints\u003c\/li\u003e\n  \u003cli\u003eStorage: keep bottles sealed and out of extreme heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Renegade Metal Maintenance Bundle is aimed at vehicle owners, fleet managers, boaters, and detailers who want professional-grade metal polishing without specialized equipment. It’s ideal for people restoring fuel tanks, cleaning trim and bumpers, or maintaining stainless fittings—anyone who values a deep, consistent shine and prefers simple, hand-applied products that deliver reliable results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this kit on chrome and aluminum?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The two-step system works on aluminum, stainless steel, and chrome—use Pro Red for oxidation then EZ Red to finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a buffer to use these polishes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Both products are formulated for hand application with microfiber or cotton towels—no polishing machine required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Renegade Products","offers":[{"title":"Default Title","offer_id":67585013022905,"sku":"B0FDPS8R6P","price":188.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/renegade-front-packaging-pro-red-ez-red.jpg?v=1790463446"},{"product_id":"meguiars-ultimate-waterless-wash-wax-6-26-oz-spray-bottles-safe-paint-protection-gloss","title":"Meguiar's Ultimate Waterless Wash \u0026 Wax - 6×26 oz Spray Bottles, Safe Paint Protection \u0026 Gloss","description":"\u003cp\u003e\u003cstrong\u003eMeguiar's G3626 Ultimate Waterless Wash \u0026amp; Wax is a six-bottle kit of 26 oz spray bottles that cleans and applies a protective shine without water.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit bundles six 26 oz spray bottles (156 oz total) of Meguiar's waterless wash and wax formula designed for quick upkeep between full washes. It’s formulated to lift light dust, pollen and road film while depositing a durable gloss and protection layer, letting you maintain appearance without a hose, bucket or rinse station.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this waterless wash remove dirt without scratching the paint?\u003c\/h3\u003e\n\u003cp\u003eThe spray contains high-lubricity agents that encapsulate surface particles so microfiber towels glide rather than drag. That reduces the risk of swirl marks and light scratches when removing contaminants on painted and clear-coated surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLubricating polymers cushion dirt for safe wiping\u003c\/li\u003e\n  \u003cli\u003eFormulated to lift light dust, road film and fingerprints\u003c\/li\u003e\n  \u003cli\u003eCompatible with clean, quality microfiber towels to minimize abrasion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it on multiple exterior surfaces?\u003c\/h3\u003e\n\u003cp\u003eYes — the product is safe for automotive paint, clear coat, glass and most exterior trim when used as directed. It refreshes shine and helps keep surfaces protected between traditional washes, without leaving residue or streaks if wiped properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePaint and clear coat: cleans and enhances gloss\u003c\/li\u003e\n  \u003cli\u003eGlass: removes light soils and leaves a clearer view\u003c\/li\u003e\n  \u003cli\u003eTrim and plastic: brightens and reduces dulling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the six-bottle kit a good value for car care?\u003c\/h3\u003e\n\u003cp\u003eBuying a six-pack of 26 oz bottles supplies enough product for many maintenance sessions, reducing trips to buy single bottles and ensuring you always have one ready. The size and spray format make it convenient for home garages, apartment dwellers, and mobile detailing setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e156 oz total—multiple applications per vehicle\u003c\/li\u003e\n  \u003cli\u003ePortable spray bottles for on-the-go touch-ups\u003c\/li\u003e\n  \u003cli\u003eEliminates need for hose, bucket or rinse between washes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use Meguiar's Ultimate Waterless Wash \u0026amp; Wax safely?\u003c\/h3\u003e\n\u003cp\u003eSpray a generous mist over one panel at a time and promptly wipe with a clean microfiber towel, flipping to a dry side to buff. Work in the shade and avoid heavy soils; for heavily soiled areas, perform a traditional wash first to avoid dragging grit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpray, gently wipe, flip towel, buff to shine\u003c\/li\u003e\n  \u003cli\u003eUse on cool surfaces out of direct sunlight\u003c\/li\u003e\n  \u003cli\u003eUse clean microfiber towels and change frequently\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This six-bottle kit is aimed at car owners, fleet managers and detailers who need a reliable, water-free maintenance solution. It’s ideal for anyone who wants to preserve gloss and remove daily light soils without access to a hose—perfect for apartment parking, winter climates, road trips or quick pre-show touch-ups.\u003c\/p\u003e\n\u003ch3\u003eIngredients\u003c\/h3\u003e\n\u003cp\u003eReady to Use\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this product safe for clear coat and paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. When used with clean microfiber towels on cool surfaces, it’s formulated to clean and enhance gloss without harming clear coat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this instead of a full car wash?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s meant for light soils and between-wash maintenance; heavily soiled vehicles still require a traditional wash first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Meguiar's","offers":[{"title":"Default Title","offer_id":67585017807033,"sku":"B00N4KHP6K","price":201.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/meguiars-ultimate-waterless-front-packaging.jpg?v=1790463573"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/chemical-guys-sticky-snowball-front-label.jpg?v=1790612474","url":"https:\/\/redleafauto.ca\/collections\/exterior-car-care.oembed?page=4","provider":"Redleaf Auto","version":"1.0","type":"link"}