{"title":"Fram","description":"\u003cp\u003eBrowse 45 Fram products at RedLeaf Auto, including oil, air, cabin \u0026amp; fuel filters. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"fram-extra-guard-engine-air-filter-ca10261-direct-fit-up-to-12-000-mi-protection-layered-media","title":"Fram Extra Guard Engine Air Filter CA10261 — Direct-Fit, Up to 12,000 mi Protection, Layered Media","description":"\u003cp\u003e\u003cstrong\u003eThe FRAM CA10261 Extra Guard Engine Air Filter is a vehicle-specific replacement filter designed to reduce incoming dirt and road debris while helping maintain engine performance for up to 2 years or 12,000 miles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis FRAM Extra Guard model uses a layered, advanced filter media engineered to capture more particles than standard retail-brand filters. Designed as a direct-fit, vehicle-specific part, the CA10261 installs in the factory airbox without modification and can help preserve airflow, protect intake components, and support consistent engine response between scheduled maintenance intervals.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the CA10261 keep dirt out of my engine?\u003c\/h3\u003e\n\u003cp\u003eThe CA10261 relies on FRAM’s multi-layer filter media to trap a wide range of airborne particles before they reach the intake. Its construction balances filtration efficiency with airflow to reduce the amount of abrasive dust and debris that can enter the combustion system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced layered media captures finer particles than average retail-brand filters\u003c\/li\u003e\n  \u003cli\u003eDesigned to pass airflow while retaining contaminants\u003c\/li\u003e\n  \u003cli\u003eSeals to the factory airbox to prevent bypass of unfiltered air\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill using this filter affect my vehicle’s performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a clogged or worn air filter with the FRAM CA10261 can help restore the airflow characteristics the engine was designed for, which may improve throttle response and maintain horsepower potential. The filter is built to balance filtration with sufficient airflow so the engine can breathe without compromising protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps maintain designed airflow for consistent engine response\u003c\/li\u003e\n  \u003cli\u003eMay improve acceleration if the previous filter was heavily restricted\u003c\/li\u003e\n  \u003cli\u003eFits the original airbox to preserve manufacturer airflow routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does the FRAM Extra Guard CA10261 last?\u003c\/h3\u003e\n\u003cp\u003eFRAM rates the Extra Guard line for protection for up to 2 years or 12,000 miles under normal driving conditions, making it suitable for routine maintenance schedules. Actual service life depends on driving environment—frequent dusty or off-road driving can require earlier replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuggested replacement interval: up to 2 years or 12,000 miles\u003c\/li\u003e\n  \u003cli\u003eShorten intervals if you drive in heavy dust, construction zones, or off-road\u003c\/li\u003e\n  \u003cli\u003eEasy visual inspection can help determine if earlier change is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward for a DIYer?\u003c\/h3\u003e\n\u003cp\u003eThe CA10261 is a vehicle-specific, direct-fit replacement designed to drop into the factory airbox, so most owners can swap it themselves with basic tools. No cutting, trimming, or modifications are required; simply remove the airbox cover, replace the old filter, and reseal the housing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit for compatible vehicle applications—no trimming required\u003c\/li\u003e\n  \u003cli\u003eStandard airbox access tools are usually sufficient\u003c\/li\u003e\n  \u003cli\u003eCovers and seals are designed for easy reassembly and correct fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA10261 Extra Guard Engine Air Filter is aimed at drivers who want a reliable, vehicle-specific replacement that prioritizes particle capture and straightforward installation. It's a practical choice for routine maintenance on compatible cars and light trucks—especially for owners seeking improved protection over basic filters without sacrificing airflow or requiring specialized parts or tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the FRAM CA10261 a direct replacement for my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CA10261 is a vehicle-specific, direct-fit air filter designed to install in the factory airbox without modifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I change the CA10261 filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: FRAM recommends up to 2 years or 12,000 miles under normal driving; replace sooner in dusty or severe conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67588803985593,"sku":"B001NYIHWA","price":88.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca10261-front-packaging.jpg?v=1790525171"},{"product_id":"fram-fresh-breeze-cabin-air-filter-cf11966-arm-hammer-odor-control-multi-layer-particle-capture","title":"Fram Fresh Breeze Cabin Air Filter CF11966 — ARM \u0026 HAMMER odor control, multi-layer particle capture","description":"\u003cp\u003e\u003cstrong\u003eThe FRAM CF11966 Fresh Breeze is a cabin air filter that removes airborne particles and reduces odors using ARM \u0026amp; HAMMER baking soda embedded in the filter media.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDriving exposes your vehicle’s cabin to pollen, road dust, wildfire smoke and everyday exhaust; the FRAM Fresh Breeze cabin filter captures a high percentage of those contaminants while neutralizing unpleasant smells before air circulates through the HVAC system. Engineered for straightforward installation and periodic replacement, this filter helps restore fresher air to the passenger compartment without changing how your ventilation system operates.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Fresh Breeze filter improve in-cabin air quality?\u003c\/h3\u003e\n\u003cp\u003eThe filter traps particles pulled into the vehicle by the heating, ventilation and air conditioning system while minimizing common odors. Its layered media captures fine particulates and the embedded ARM \u0026amp; HAMMER baking soda works to neutralize odor molecules rather than merely masking them.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-layer filtration captures pollen, dust and soot.\u003c\/li\u003e\n  \u003cli\u003eARM \u0026amp; HAMMER-infused media reduces trapped odors.\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit OEM specifications for proper airflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the FRAM CF11966 fit my vehicle and is it easy to install?\u003c\/h3\u003e\n\u003cp\u003eThe CF11966 is manufactured to match the dimensions and connector style used in compatible vehicles; check fitment against your make and model before purchase. Installation is typically a simple swap performed at the glove box or under-hood cabin filter location depending on the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck vehicle-specific compatibility or parts lookup.\u003c\/li\u003e\n  \u003cli\u003eNo special tools required for most installations.\u003c\/li\u003e\n  \u003cli\u003eDesigned for straightforward replacement during routine maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the Fresh Breeze cabin filter?\u003c\/h3\u003e\n\u003cp\u003eReplacement intervals depend on driving conditions and local air quality; heavier pollution, frequent city driving or wildfire smoke events mean more frequent changes. FRAM recommends following your vehicle’s maintenance schedule and inspecting the filter annually or after noticeable odor or airflow changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect at least once per year or more in poor air conditions.\u003c\/li\u003e\n  \u003cli\u003eReplace sooner if you notice reduced airflow or persistent odors.\u003c\/li\u003e\n  \u003cli\u003eRegular replacement maintains HVAC efficiency and cabin comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this filter affect HVAC performance or fuel economy?\u003c\/h3\u003e\n\u003cp\u003eThe CF11966 is designed to balance particle capture with proper airflow so the heating and cooling system can operate normally; it should not negatively impact HVAC performance when correctly installed. Maintaining a clean filter helps the system run efficiently, which supports consistent cabin temperatures and blower operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for OEM-compatible airflow characteristics.\u003c\/li\u003e\n  \u003cli\u003eProper fit reduces bypass and preserves system efficiency.\u003c\/li\u003e\n  \u003cli\u003eRoutine replacement prevents strain from clogged filters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CF11966 Fresh Breeze cabin air filter is suitable for drivers who want improved particle removal and odor control inside their vehicle without changing HVAC behavior. It’s a practical choice for commuters, families, and anyone living in areas with pollen, city pollution or intermittent smoke events who values straightforward, periodic maintenance to keep the cabin air more pleasant.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Fresh Breeze filter remove smoke and pollen?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the multi-layer media captures pollen and many smoke particles; the embedded ARM \u0026amp; HAMMER also helps neutralize odors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the CF11966 myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most users can replace it easily using the glove box or under-hood access; check your vehicle manual for location and fit instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591107215545,"sku":"B01HU1MUOA","price":62.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-cf11966-front-packaging.jpg?v=1790541449"},{"product_id":"fram-extra-guard-engine-air-filter-ca9401-for-ram-dodge-trucks-direct-fit-12-000-mile-protection","title":"Fram Extra Guard Engine Air Filter CA9401 for Ram\/Dodge trucks — direct-fit, 12,000-mile protection","description":"\u003cstrong\u003eFRAM CA9401 Extra Guard Engine Air Filter is a direct-fit replacement that helps block road dust and dirt while supporting steady engine airflow for up to 12 months or 12,000 miles.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Ram or Dodge pickup is due for routine service, the FRAM CA9401 Extra Guard delivers a straightforward, economical way to help protect the engine from airborne contaminants. Built with FRAM's advanced filter media, this cartridge is engineered to capture and retain more particulates than typical retail-brand filters, while fitting OEM intake housings for quick installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the FRAM CA9401 improve everyday engine performance?\u003c\/h3\u003e\n\u003cp\u003eThis air filter helps preserve clean intake air so the engine can breathe more freely under normal driving conditions. Cleaner airflow supports consistent throttle response and can help maintain factory power and fuel efficiency between changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced media traps common road dust and airborne debris\u003c\/li\u003e\n  \u003cli\u003eDesign maintains steady airflow for reliable combustion\u003c\/li\u003e\n  \u003cli\u003eReplacement can restore performance lost to a clogged filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does this filter provide and for how long?\u003c\/h3\u003e\n\u003cp\u003eThe Extra Guard media is engineered to hold a significant amount of dirt, reducing the amount of particulate that reaches the intake system. FRAM rates this filter for protection up to 12 months or 12,000 miles under normal driving—whichever comes first—making it suitable for routine maintenance intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh dirt-holding capacity reduces ingestion of particles\u003c\/li\u003e\n  \u003cli\u003eMedia design helps keep contaminants away from internal components\u003c\/li\u003e\n  \u003cli\u003eService interval recommendation: up to 12 months \/ 12,000 miles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the CA9401 fit my truck and is it easy to install?\u003c\/h3\u003e\n\u003cp\u003eCA9401 is manufactured to match factory dimensions for many Ram and Dodge engines, so it drops into the stock airbox without modification. Installation is typically straightforward and can be completed with common hand tools or by hand on many models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit for numerous Ram 1500, 2500 and 3500 model years and engines\u003c\/li\u003e\n  \u003cli\u003ePrecision shape and sealing edges for proper inlet alignment\u003c\/li\u003e\n  \u003cli\u003eQuick swap design reduces time spent on routine maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this filter compare to other retail-brand options?\u003c\/h3\u003e\n\u003cp\u003eFRAM's Extra Guard media is designed to let through less dirt compared with many standard retail-brand filters, emphasizing a balance of filtration efficiency and airflow. It aims to offer dependable protection without the premium price of specialty filters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered media for lower particulate passage than average retail filters\u003c\/li\u003e\n  \u003cli\u003eBalances filtration with airflow to avoid restricting intake unnecessarily\u003c\/li\u003e\n  \u003cli\u003eCost-effective choice for routine service intervals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA9401 Extra Guard is aimed at Ram and Dodge owners who want a reliable, OEM-compatible air filter for routine maintenance. It’s a good fit for drivers of 2002–2010 and select later model trucks with the listed engine codes who prefer an affordable filter that helps protect the engine between scheduled services.\u003c\/p\u003e\n\n\u003cp\u003eFeatures include designed-for-day-to-day engine performance, contaminant protection to keep intake air cleaner, strong dirt-holding capacity, and a precision fit for straightforward installation. Check your vehicle compatibility against the listed model years and engine sizes before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which vehicles is FRAM CA9401 compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits many Ram and Dodge trucks listed for 2002–2010 models plus select later Ram 1500\/2500\/3500 engines; verify against your engine code before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the FRAM CA9401?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: FRAM recommends replacement up to every 12 months or 12,000 miles under normal driving, or sooner in dusty conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591141785785,"sku":"B000A0CALC","price":67.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca9401-front-view.jpg?v=1790542278"},{"product_id":"fram-engine-air-filter-ca12295-extra-guard-direct-replacement-up-to-12-000-mi","title":"Fram Engine Air Filter CA12295 Extra Guard — Direct Replacement, Up to 12,000 mi","description":"\u003cstrong\u003eThe FRAM CA12295 Extra Guard Engine Air Filter is a flexible panel air filter designed to trap harmful particles and help maintain engine performance between recommended service intervals.\u003c\/strong\u003e\n\n\u003cp\u003eBuilt with FRAM's advanced filter media, the CA12295 Extra Guard filter delivers a balance of airflow and particulate capture to protect your engine from dust, dirt and debris. Laboratory testing by FRAM indicates its media provides superior efficiency compared with many standard retail-brand filters, supporting typical change intervals up to 12,000 miles depending on driving conditions and manufacturer recommendations. This product is a direct-replacement, easy-to-install panel-style filter intended for routine maintenance in compatible vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the CA12295 Extra Guard filter protect my engine?\u003c\/h3\u003e\n\u003cp\u003eThe filter media is engineered to trap contaminants before they enter the intake system, reducing the chance that abrasive particles wear internal components. By maintaining cleaner incoming air, the engine can preserve designed combustion dynamics and accessory longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced FRAM media tested for higher particle capture.\u003c\/li\u003e\n  \u003cli\u003eFlexible panel construction conforms to factory airbox shapes.\u003c\/li\u003e\n  \u003cli\u003eDesigned to minimize airflow restriction while filtering effectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace this FRAM air filter?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends following your vehicle manufacturer's service schedule; many owners use FRAM Extra Guard filters for up to 12,000 miles between changes under normal driving conditions. Shorter intervals are advisable in dusty, off-road or severe environments to maintain optimal protection and performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical guidance: up to 12,000 miles in standard conditions.\u003c\/li\u003e\n  \u003cli\u003eInspect more frequently in dusty or heavy-traffic areas.\u003c\/li\u003e\n  \u003cli\u003eReplace immediately if filter appears clogged or damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the CA12295 easy to install in my vehicle?\u003c\/h3\u003e\n\u003cp\u003eYes — this panel-style FRAM filter is designed for straightforward, tool-minimal installation in compatible airboxes. It fits into the same mounting location as the factory filter and generally requires only access to the airbox cover and simple clamps or fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement shape for factory airbox compatibility.\u003c\/li\u003e\n  \u003cli\u003eInstallation typically requires basic hand tools or none at all.\u003c\/li\u003e\n  \u003cli\u003eService-friendly design reduces time spent during routine maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter affect fuel economy or engine power?\u003c\/h3\u003e\n\u003cp\u003eThe CA12295 balances filtration efficiency with airflow to avoid unnecessary restriction; when replaced at recommended intervals it helps maintain designed engine response and efficiency. A heavily clogged filter, by contrast, can reduce acceleration and overall performance, so regular replacement supports consistent operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for good airflow while trapping particulates.\u003c\/li\u003e\n  \u003cli\u003eRegular replacement helps preserve acceleration and power.\u003c\/li\u003e\n  \u003cli\u003eNot a performance upgrade part—meant for maintenance and protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA12295 Extra Guard Engine Air Filter is aimed at vehicle owners and independent technicians seeking an economical, tested replacement air filter that balances particle capture with steady airflow. It’s suitable for drivers wanting a reliable maintenance item that follows OEM form factor and installation steps, especially those who prefer an established brand with laboratory-tested media performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this FRAM CA12295 for 12,000-mile change intervals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: FRAM tests support up to 12,000 miles in normal driving, but follow your vehicle's owner's manual and shorten intervals in dusty or severe conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the CA12295 a direct replacement for my factory filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the CA12295 is a direct-fit flexible panel filter designed to replace the factory air filter in compatible airboxes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591226917049,"sku":"B07QRB9FQR","price":67.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca12295-front-packaging.jpg?v=1790544347"},{"product_id":"fram-extra-guard-engine-air-filter-ca8755a-direct-fit-for-chevrolet-gmc-cadillac-improved-filtration-and-airflow","title":"Fram Extra Guard Engine Air Filter CA8755A — Direct-Fit for Chevrolet\/GMC\/Cadillac, Improved Filtration and Airflow","description":"\u003cp\u003e\u003cstrong\u003eFRAM CA8755A Extra Guard is a replacement engine air filter engineered to trap airborne contaminants while preserving airflow for everyday driving performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt with FRAM's advanced filtration media, the CA8755A balances particle capture and airflow to help maintain engine responsiveness across typical driving conditions. It is designed as a direct-fit replacement for a wide range of Chevrolet, GMC and Cadillac models, and FRAM testing shows improved contaminant control versus a leading standard retail competitor. Follow your vehicle manufacturer’s recommended service intervals for optimal results.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter help my engine's day-to-day performance?\u003c\/h3\u003e\n\u003cp\u003eThe CA8755A maintains clean intake air to support steady combustion and throttle response. By reducing the amount of dust and debris that reach the intake system, it helps the engine run as intended between service intervals without restricting airflow under normal driving loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced media captures common road dust and pollen while allowing adequate airflow.\u003c\/li\u003e\n  \u003cli\u003eDesigned for everyday driving rather than heavy-duty off-road conditions.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent decreased acceleration and power loss linked to clogged filters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes FRAM's Extra Guard different from standard filters?\u003c\/h3\u003e\n\u003cp\u003eFRAM Extra Guard uses a proprietary media engineered to increase dirt-holding capacity and filtration efficiency compared with many standard retail-brand filters. Lab testing under ISO 5011 methods demonstrates enhanced particle capture for select FRAM models versus equivalent standard-brand filters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered filter media with improved contaminant retention.\u003c\/li\u003e\n  \u003cli\u003eTested for filtration efficiency under standardized conditions.\u003c\/li\u003e\n  \u003cli\u003eConstructed for consistent performance through typical mileage intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the CA8755A easy to install and which vehicles will it fit?\u003c\/h3\u003e\n\u003cp\u003eThe FRAM CA8755A is manufactured for a precise, direct fit in compatible airboxes, simplifying installation during routine maintenance. It replaces factory equipment on many Chevrolet, GMC and Cadillac trucks and SUVs — check your owner’s manual or part lookup to confirm compatibility with your specific year and engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-fit design for straightforward swap-in replacement.\u003c\/li\u003e\n  \u003cli\u003eCompatible with numerous Chevy Silverado, Tahoe, Suburban, Avalanche models, GMC Sierra and Yukon variants, and Cadillac Escalade models.\u003c\/li\u003e\n  \u003cli\u003eFollow the vehicle owner’s manual for correct service intervals and installation guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I change the air filter and what can I expect after replacement?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends following the change intervals outlined in your vehicle's owner's manual; many users find inspections around 12,000 miles useful for everyday driving. A fresh CA8755A typically restores unobstructed airflow compared with a heavily soiled filter, helping preserve throttle response and overall engine operation between services.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect at recommended intervals or earlier in dusty environments.\u003c\/li\u003e\n  \u003cli\u003eReplacing a clogged filter can improve acceleration feel and consistency.\u003c\/li\u003e\n  \u003cli\u003eRegular replacement supports long-term intake cleanliness and engine maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA8755A Extra Guard is aimed at drivers of compatible Chevrolet, GMC and Cadillac trucks and SUVs who want a reliable, direct-fit replacement that improves particulate capture without sacrificing airflow for everyday use. It suits owners who perform routine maintenance themselves or professional technicians seeking a tested aftermarket air filter option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the CA8755A fit my Silverado or Sierra?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The CA8755A fits many Chevrolet Silverado and GMC Sierra models; confirm fitment using your vehicle year and engine in the owner’s manual or parts lookup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace this FRAM air filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow your vehicle maker’s recommended intervals; checking around 12,000 miles is common for everyday driving conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591256211641,"sku":"B000C31J9G","price":67.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca8755a-front-packaging.jpg?v=1790545335"},{"product_id":"fram-fresh-breeze-cabin-air-filter-cf10285-arm-hammer-odor-neutralizing-vehicle-specific-fit","title":"Fram Fresh Breeze Cabin Air Filter CF10285 — ARM \u0026 HAMMER odor-neutralizing, vehicle-specific fit","description":"\u003cp\u003e\u003cstrong\u003eFRAM CF10285 Fresh Breeze Cabin Air Filter is a vehicle-specific cabin filter that reduces odors and captures airborne particles using ARM \u0026amp; HAMMER baking soda embedded in the media.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for a wide range of Toyota, Lexus, Subaru, Scion, Jaguar, Land Rover, Pontiac and other compatible models, the FRAM Fresh Breeze cabin air filter combines multi-layer filtration with natural deodorizing properties. It traps common contaminants—pollen, road dust, smoke particles—and helps neutralize smells before they enter the vehicle cabin. The CF10285 fits into the HVAC intake and works while the fan is running, offering a straightforward maintenance upgrade that improves in-car air quality between scheduled service intervals.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter reduce odors and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThe Fresh Breeze filter integrates ARM \u0026amp; HAMMER baking soda into its media to help neutralize offensive odors passing through the ventilation system. Instead of simply masking smells, the embedded deodorizer interacts with odor-causing molecules to reduce their presence in the airflow. This is particularly useful during wildfire season or when driving through areas with strong odors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eARM \u0026amp; HAMMER-infused media for natural odor neutralization\u003c\/li\u003e\n  \u003cli\u003eWorks continuously when the HVAC system draws outside air\u003c\/li\u003e\n  \u003cli\u003eReduces need for surface sprays or additional odor control products\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of particles and contaminants does the FRAM CF10285 capture?\u003c\/h3\u003e\n\u003cp\u003eThe CF10285 captures a broad range of airborne contaminants that commonly enter vehicles through the heating and A\/C intake. FRAM rates its filtration to remove the majority of pollen, dust and other particulate matter that can aggravate sensitivities or reduce cabin air clarity. While not a medical device, it helps lower the concentration of exterior particulates inside the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFilters pollen, road dust and common airborne particles\u003c\/li\u003e\n  \u003cli\u003eTraps debris before it spreads through the HVAC ducts\u003c\/li\u003e\n  \u003cli\u003eHelps maintain clearer airflow and reduce odor-bearing particulates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and when should I replace it?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most vehicles: access the glove box or HVAC housing per the vehicle’s service instructions, remove the old cabin filter and slide in the FRAM CF10285 with the correct airflow orientation. Replacement intervals depend on driving conditions—more frequent changes are advisable in dusty environments or during heavy pollen seasons. Check the filter at least once a year or with every scheduled cabin air inspection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect swap for compatible models—vehicle-specific fit\u003c\/li\u003e\n  \u003cli\u003eInspect yearly; replace sooner in dusty, smoky or high-pollen conditions\u003c\/li\u003e\n  \u003cli\u003eNo special tools usually required; follow vehicle manual for access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles are compatible with this part and how can I confirm fit?\u003c\/h3\u003e\n\u003cp\u003eThe CF10285 is listed for a variety of models from Toyota, Lexus, Subaru, Scion, Jaguar, Land Rover and select Pontiac vehicles. Compatibility covers multiple model years and engine types; always verify part number FRAM CF10285 against your vehicle’s make, model and year before purchase. Retailers and vehicle parts databases can confirm fitment using VIN or year\/model lookup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for specific Toyota, Lexus, Subaru, Scion models and more\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle fit using VIN or year\/model lookup to confirm compatibility\u003c\/li\u003e\n  \u003cli\u003eFRAM part number CF10285 ensures correct replacement sizing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The FRAM CF10285 Fresh Breeze cabin air filter is ideal for drivers who want a simple, OEM-friendly replacement that reduces odors and captures common airborne contaminants. It suits owners of compatible Toyota, Lexus, Subaru, Scion, Jaguar, Land Rover and Pontiac vehicles who regularly encounter pollen, dust, smoke or city pollution and prefer a maintenance upgrade that improves the in-cabin environment without additional products. Choose this filter if you value straightforward installation, vehicle-specific fit, and a deodorizing filter media backed by a recognized brand.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFit type: Vehicle Specific. Material: Paper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this cabin filter remove pollen and smoke?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The FRAM CF10285 captures pollen and common smoke particles while the ARM \u0026amp; HAMMER layer helps reduce odors from smoke.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the FRAM Fresh Breeze filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Inspect annually and replace sooner in heavy dust, pollen or wildfire smoke conditions—generally every 12 months or per vehicle recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591257948345,"sku":"B001CEG90I","price":62.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-cf10285-front-packaging.jpg?v=1790545418"},{"product_id":"fram-extra-guard-engine-air-filter-ca12057-for-hyundai-kia-up-to-12-000-mile-protection-pleated-media","title":"Fram Extra Guard Engine Air Filter CA12057 for Hyundai \u0026 Kia — Up to 12,000-Mile Protection, Pleated Media","description":"\u003cb\u003eFRAM CA12057 Extra Guard is a replacement engine air filter built to trap fine particles and protect your engine while supporting consistent performance up to 12,000 miles between changes.\u003c\/b\u003e\n\n\u003cp\u003eDesigned for drivers of select Hyundai and Kia models, the FRAM CA12057 uses FRAM's tested filter media to capture contaminants that can rob power and efficiency. The element balances airflow and filtration to help maintain throttle response and keep intake components cleaner compared with many standard retail alternatives. Installation follows factory recommendations, and changing it at appropriate intervals helps preserve the engine's design performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the CA12057 protect my engine during daily driving?\u003c\/h3\u003e\n\u003cp\u003eThe CA12057 captures dust, pollen and road debris before they reach the intake, reducing the amount of abrasive particles that circulate through engine parts. Cleaner intake air reduces wear on cylinders and sensors, which supports more consistent combustion over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced FRAM filter media tested for high particle capture efficiency.\u003c\/li\u003e\n  \u003cli\u003ePleated design increases surface area to trap more contaminants.\u003c\/li\u003e\n  \u003cli\u003eSealing edges fit the housing to prevent bypass and ensure proper airflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter affect my vehicle's power and fuel economy?\u003c\/h3\u003e\n\u003cp\u003eThe CA12057 is engineered to balance filtration with adequate airflow so the engine receives the air it needs for combustion. While no air filter can dramatically change factory-rated power, using a clean, correctly sized filter helps preserve acceleration and fuel-consumption characteristics by preventing progressive clogging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimized pleat spacing for steady airflow under typical driving loads.\u003c\/li\u003e\n  \u003cli\u003eIntended to help avoid the reduced throttle response that comes from a soiled filter.\u003c\/li\u003e\n  \u003cli\u003eFollow the vehicle owner's manual for change intervals to maintain ideal performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the FRAM CA12057 and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends change intervals consistent with maintaining performance; the CA12057 is designed for up to 12,000 miles between changes under normal conditions. Replacing the cartridge is usually a simple, tool-light job—open the airbox, remove the old element, seat the new filter and close the housing—so many owners perform the swap themselves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12,000-mile guideline for typical driving conditions; adjust for heavy dust or off-road use.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement for the listed Hyundai and Kia models for quick installation.\u003c\/li\u003e\n  \u003cli\u003eInspect the filter at regular service intervals and replace sooner if visibly dirty or damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles is the CA12057 compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe CA12057 fits a range of recent Hyundai and Kia compact models and is intended as a direct replacement part for those applications. Confirm fitment against your vehicle year and engine variant before purchasing to ensure proper compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHyundai: 2017–2020 Elantra, 2018–2020 Elantra GT, 2018–2023 Kona, 2019–2021 Veloster.\u003c\/li\u003e\n  \u003cli\u003eKia: 2020–2024 Forte, 2020–2024 Forte5, 2020–2022 Soul 1.6L, 2020–2025 Soul 2.0L.\u003c\/li\u003e\n  \u003cli\u003eCheck your owner's manual or parts catalog for confirmation of the CA12057 fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The FRAM CA12057 Extra Guard suits drivers who own supported Hyundai or Kia models and want a reliable, tested replacement air filter that balances airflow and particle capture for routine servicing. It is a practical choice for commuters and everyday drivers who prefer scheduled filter changes to help maintain throttle response and intake cleanliness, and for DIYers who want an easy, direct-fit swap during regular maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the CA12057 in dusty or off-road conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, but replace it more frequently than 12,000 miles if you drive often in heavy dust or off-road to maintain filtration and airflow.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the CA12057 a direct replacement for my Hyundai or Kia?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your vehicle is listed in the fitment range, CA12057 is a direct-fit replacement—verify year and engine to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591365329081,"sku":"B077Y7QGHT","price":67.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca12057-front-view-packaging.jpg?v=1790548740"},{"product_id":"fram-extra-guard-engine-air-filter-ca10163-direct-fit-12-000-mile-protection","title":"Fram Extra Guard Engine Air Filter CA10163 — Direct-Fit, 12,000-Mile Protection","description":"\u003cp\u003e\u003cstrong\u003eThe FRAM CA10163 Extra Guard Engine Air Filter traps road dust and airborne debris to protect your engine and help maintain performance for up to 2 years or 12,000 miles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a direct replacement for factory air filters, the FRAM Extra Guard CA10163 uses an advanced filtration media to capture more contaminants than many standard retail filters while preserving engine airflow. It’s a straightforward upgrade meant for routine maintenance—simple to install, engineered for a precise fit, and built to help your vehicle breathe cleaner air during everyday driving.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this air filter improve routine engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe FRAM Extra Guard focuses on keeping intake air cleaner without overly restricting flow. Cleaner air helps your engine operate more consistently under normal driving conditions, which can support steady acceleration and responsiveness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced media traps more dirt than many leading standard retail filters.\u003c\/li\u003e\n  \u003cli\u003eBalanced design maintains airflow for dependable engine function.\u003c\/li\u003e\n  \u003cli\u003ePrecision fit reduces gaps where unfiltered air might enter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will the CA10163 filter last before replacement?\u003c\/h3\u003e\n\u003cp\u003eThis filter is engineered to provide protection for up to 2 years or 12,000 miles under typical driving conditions. Actual life depends on driving environment—dustier or off-road use will require more frequent changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated protection period: up to 2 years or 12,000 miles.\u003c\/li\u003e\n  \u003cli\u003eMonitor service intervals if driving in heavy dust or polluted areas.\u003c\/li\u003e\n  \u003cli\u003eInspect visually during regular maintenance for excessive contamination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the FRAM Extra Guard different from a basic replacement filter?\u003c\/h3\u003e\n\u003cp\u003eThe Extra Guard line uses a higher-capacity media that captures and holds more particles, helping reduce the amount of dirt reaching the engine compared with many basic filters. It’s optimized for everyday drivers who want reliable protection without specialty performance features.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigher dirt-holding capacity than many standard retail-brand filters.\u003c\/li\u003e\n  \u003cli\u003eMedia engineered to balance capture and airflow for everyday use.\u003c\/li\u003e\n  \u003cli\u003eManufactured to match original equipment fit and function for easy installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation complicated and will it fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe CA10163 is produced to match factory dimensions for compatible vehicles, so installation is typically quick and tool-minimal. A proper seal and fit are important—replace the old filter with the new unit following the manufacturer’s service instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-manufactured to fit the intended airbox configuration.\u003c\/li\u003e\n  \u003cli\u003eDesigned for straightforward swap during routine service intervals.\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle compatibility guide or owner’s manual prior to purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA10163 Extra Guard Engine Air Filter is for drivers who perform routine maintenance and want dependable contamination protection for everyday driving. It suits owners seeking an affordable, higher-capacity replacement that balances dirt capture with maintained airflow—ideal for commuters, families, and anyone wanting straightforward, factory-fit filtration for up to 12,000 miles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the FRAM CA10163 air filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace approximately every 2 years or 12,000 miles under normal driving; inspect sooner in dusty conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this filter fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle’s parts guide or compatibility chart—CA10163 is manufactured to match specific factory airbox dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591369752761,"sku":"B0010E1LYO","price":71.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca10163-front-view.jpg?v=1790548962"},{"product_id":"fram-fresh-breeze-cabin-air-filter-cf12436-subaru-direct-fit-arm-hammer-odor-neutralizing","title":"Fram Fresh Breeze Cabin Air Filter CF12436 — Subaru Direct-Fit, Arm \u0026 Hammer Odor Neutralizing","description":"\u003cstrong\u003eThe FRAM CF12436 Fresh Breeze Cabin Air Filter uses Arm \u0026amp; Hammer baking soda to reduce odors while trapping dust, pollen and road debris for fresher in-cabin air.\u003c\/strong\u003e\n\n\u003cp\u003eKeep the air inside your vehicle cleaner and more comfortable with the FRAM Fresh Breeze cabin air filter. This replacement filter combines particle filtration with embedded Arm \u0026amp; Hammer baking soda to help neutralize common odors that enter through your car’s HVAC system. Engineered for daily driving conditions and seasonal allergens, it helps reduce airborne particles and unpleasant smells that can accumulate inside the cabin.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter improve in-cabin air quality?\u003c\/h3\u003e\n\u003cp\u003eThe FRAM Fresh Breeze filter captures typical contaminants such as dust, pollen and road particulates as outside air passes through the HVAC system. Its media is designed to remove a high percentage of these airborne particles, helping the interior feel cleaner and minimizing the buildup of irritants on vents and surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to remove 98% of common airborne contaminants that enter through ventilation.\u003c\/li\u003e\n  \u003cli\u003eMulti-layer filtration stops dirt, road dust and pollen before they spread inside the cabin.\u003c\/li\u003e\n  \u003cli\u003eFits into the factory cabin filter housing for straightforward replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat role does Arm \u0026amp; Hammer baking soda play in the Fresh Breeze filter?\u003c\/h3\u003e\n\u003cp\u003eRather than masking smells, the embedded Arm \u0026amp; Hammer baking soda works to neutralize many everyday odors from traffic, food or vehicle materials. The deodorizing agent is integrated into the filter media, providing continuous odor control as air flows through the system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNatural deodorizing properties help reduce unwanted cabin odors without perfumes.\u003c\/li\u003e\n  \u003cli\u003eWorks continuously while the HVAC system circulates outside air into the vehicle.\u003c\/li\u003e\n  \u003cli\u003eDelivers fresher-smelling air without additional sprays or chemicals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and which vehicles does this filter fit?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same simple steps as most factory cabin filter replacements: access the filter housing, remove the old element and insert the replacement with the correct orientation. The CF12436 is specifically compatible with a range of Subaru models, making it a direct-fit option for many owners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement for select Subaru models including Crosstrek, Outback and Forester.\u003c\/li\u003e\n  \u003cli\u003eNo modifications required—designed for the vehicle’s OEM filter compartment.\u003c\/li\u003e\n  \u003cli\u003eClear fitment guidance reduces installation time for DIY or technician replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the Fresh Breeze cabin filter?\u003c\/h3\u003e\n\u003cp\u003eReplacement intervals depend on driving conditions and local air quality; heavy pollen, wildfire smoke or dusty roads may require more frequent changes. Check the vehicle manufacturer’s recommended interval and inspect the filter periodically—replace sooner if you notice reduced airflow, persistent odors or visible clogging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFollow your vehicle’s service schedule for baseline replacement timing.\u003c\/li\u003e\n  \u003cli\u003eReplace more often in areas with high pollen, wildfire smoke or road dust.\u003c\/li\u003e\n  \u003cli\u003eVisual inspection: replace if filter appears dirty, discolored or compressed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The FRAM CF12436 Fresh Breeze Cabin Air Filter is aimed at Subaru owners and drivers who want a practical way to reduce cabin odors and airborne particles without added fragrances. It suits commuters, families and anyone sensitive to pollen or dust, as well as drivers in regions affected by seasonal smoke or roadside dust who prefer a direct-fit, easy-to-install replacement with built-in odor control.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Subaru models fit the CF12436 filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: CF12436 fits multiple Subaru models including Crosstrek, Outback, Ascent, Impreza, Forester, Legacy and XV. Check your owner’s manual or part lookup to confirm fitment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Fresh Breeze filter mask or neutralize odors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses Arm \u0026amp; Hammer baking soda embedded in the media to help neutralize many common odors rather than just masking them with fragrance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591408844985,"sku":"B0CMKX3QBL","price":62.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-fresh-breeze-front-packaging.jpg?v=1790550020"},{"product_id":"fram-fresh-breeze-cabin-air-filter-cf11183-arm-hammer-odor-control-multi-layer-filtration","title":"Fram Fresh Breeze Cabin Air Filter CF11183 — ARM \u0026 HAMMER Odor Control, Multi-layer Filtration","description":"\u003cstrong\u003eFRAM CF11183 Fresh Breeze Cabin Air Filter is a vehicle-specific cabin filter that traps particulates and uses ARM \u0026amp; HAMMER baking soda embedded in the media to reduce odors passing through your car's ventilation system.\u003c\/strong\u003e\n\nCabin air quality matters for comfort and visibility. The FRAM Fresh Breeze CF11183 combines multi-layer filtration with an odor-absorbing agent to capture pollen, dust, soot and many common smells that enter through your vehicle's HVAC intake. Designed to match factory fitment, this cabin filter is intended for easy replacement during routine maintenance so passengers can enjoy cleaner-smelling air inside the cabin.\n\n\u003ch3\u003eHow does this filter improve the air inside my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe CF11183 employs a dense filtering media that captures a high percentage of airborne particles and an embedded ARM \u0026amp; HAMMER deodorizing component that helps neutralize odors rather than just masking them. It reduces the amount of pollen, road dust, and other particulates entering your ventilation system, which can improve perceived air quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-layer media captures fine and larger particles\u003c\/li\u003e\n  \u003cli\u003eARM \u0026amp; HAMMER baking soda compound absorbs and neutralizes odors\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit the original HVAC housing for proper airflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the FRAM Fresh Breeze CF11183 fit my car and is it easy to replace?\u003c\/h3\u003e\n\u003cp\u003eThis model is vehicle-specific, engineered to match original equipment dimensions and install points. Replacement is typically a simple, tool-free or minimal-tool procedure located behind the glove box or under the dash on many vehicles—follow your owner’s manual for the exact location and steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle-specific fit reduces gaps and air bypass\u003c\/li\u003e\n  \u003cli\u003eStandard dimensions to align with factory housings\u003c\/li\u003e\n  \u003cli\u003eQuick swap process suitable for DIY or technician installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of pollutants does this cabin filter block?\u003c\/h3\u003e\n\u003cp\u003eThe CF11183 targets common contaminants that travel into the cabin through outside air intake, including pollen, road dust, soot and other particulate matter. In addition to particle capture, the ARM \u0026amp; HAMMER component helps control typical vehicle odors from exhaust, food or mildew.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCaptures fine particulates like pollen and road dust\u003c\/li\u003e\n  \u003cli\u003eHelps reduce common interior and exterior odors\u003c\/li\u003e\n  \u003cli\u003eHelps prevent debris buildup in HVAC ducts and vents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace a Fresh Breeze cabin filter?\u003c\/h3\u003e\n\u003cp\u003eReplacement frequency varies by driving conditions and local air quality; typical guidance is to inspect during routine service and replace annually or sooner in dusty, pollen-heavy, or wildfire-prone areas. If you notice reduced airflow, persistent odors, or visible debris on the filter, replace it promptly to maintain ventilation performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect every 12 months or per vehicle manufacturer recommendations\u003c\/li\u003e\n  \u003cli\u003eReplace sooner in high-pollution or dusty environments\u003c\/li\u003e\n  \u003cli\u003eSwap out when airflow decreases or odors persist\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nDrivers who want a direct, drop-in replacement cabin filter that balances particle filtration with active odor control will appreciate the FRAM CF11183 Fresh Breeze. It’s well suited for commuters, families and anyone living in areas with pollen, road dust or periodic smoke who prefer a factory-fit filter with the added benefit of ARM \u0026amp; HAMMER deodorizing technology.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the FRAM CF11183 compatible with my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: CF11183 is a vehicle-specific cabin filter; check your owner’s manual or parts lookup for exact fitment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Fresh Breeze filter remove smoke and strong odors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It helps reduce many odors using ARM \u0026amp; HAMMER deodorizing media and captures particulates but does not guarantee complete smoke removal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591427883193,"sku":"B00EAOIR8O","price":62.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-fresh-breeze-cf11183-front-view.jpg?v=1790550764"},{"product_id":"fram-fresh-breeze-cabin-air-filter-cf11775-with-arm-hammer-baking-soda-fits-select-ford-lincoln-odor-reducing-particle-filt","title":"Fram Fresh Breeze Cabin Air Filter CF11775 with Arm \u0026 Hammer Baking Soda — Fits Select Ford \u0026 Lincoln, Odor-Reducing Particle Filt","description":"\u003cp\u003e\u003cstrong\u003eFRAM CF11775 Fresh Breeze Cabin Air Filter is a vehicle cabin filter that combines particle filtration with Arm \u0026amp; Hammer baking soda to help reduce odors and improve in-cabin air quality.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCabin air quality affects comfort and visibility during every drive. The FRAM Fresh Breeze CF11775 is built to trap dust, pollen, and road debris while using embedded Arm \u0026amp; Hammer baking soda to neutralize common odors coming through your vehicle’s ventilation system. This replacement filter fits select Ford and Lincoln models and is designed for straightforward installation so you can restore fresher, less dusty cabin air quickly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter reduce smells inside my car?\u003c\/h3\u003e\n\u003cp\u003eThe Fresh Breeze filter uses a two-part approach: a physical media layer captures particles, while a layer treated with Arm \u0026amp; Hammer baking soda helps neutralize odor molecules rather than just masking them. This combination minimizes common interior smells from outside sources like traffic, smoke, or food odors entering through the HVAC system. It’s passive and chemical-free, relying on the deodorizing properties embedded in the filter itself.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eArm \u0026amp; Hammer baking soda embedded in the media to neutralize odors\u003c\/li\u003e\n  \u003cli\u003eMulti-layer filtration captures dust, pollen, and larger particulates\u003c\/li\u003e\n  \u003cli\u003eWorks continuously as air flows through the ventilation system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter help with pollen and dust for allergy relief?\u003c\/h3\u003e\n\u003cp\u003eThis cabin filter is engineered to trap common airborne particles that enter with outside air, helping reduce the amount of pollen and road dust circulating in the passenger compartment. While not a medical device, it filters a high percentage of particulates, creating a cleaner-feeling cabin for commuters and allergy-prone passengers. Regular replacement helps maintain performance and consistent air flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to capture pollen, dust, and road debris that enter through vents\u003c\/li\u003e\n  \u003cli\u003eHelps lower particle concentration inside the vehicle compared to unfiltered air\u003c\/li\u003e\n  \u003cli\u003eRecommended periodic replacement to sustain filtration efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles does the FRAM CF11775 fit, and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eThe CF11775 is compatible with a range of Ford and Lincoln vehicles including Edge, Fusion, MKZ, Nautilus, MKX, Continental and several police\/hybrid variants—check your owner’s manual for exact fitment. Installation is typically straightforward and often located behind the glove box or under the cowl; no special tools are normally required. If you’re comfortable with basic vehicle maintenance, you can replace it yourself in minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many Ford and Lincoln models—verify fitment before purchase\u003c\/li\u003e\n  \u003cli\u003eUsually installs behind glove box or under cowl access panel\u003c\/li\u003e\n  \u003cli\u003eSimple swap that often requires only basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I change the cabin air filter for best results?\u003c\/h3\u003e\n\u003cp\u003eFrequency depends on driving conditions: city and highway use in clean climates may allow longer intervals, while dusty roads or wildfire smoke require more frequent changes. A common guideline is every 12,000–15,000 miles or once a year, but inspect the filter sooner if you notice reduced airflow, persistent odors, or after heavy smoke or pollen events. Replacing the filter keeps HVAC performance steady and preserves the deodorizing layer’s effectiveness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical replacement interval: about 12,000–15,000 miles or yearly\u003c\/li\u003e\n  \u003cli\u003eInspect sooner after driving in smoky, dusty, or high-pollen conditions\u003c\/li\u003e\n  \u003cli\u003eReplacing regularly sustains airflow and odor control performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CF11775 Fresh Breeze Cabin Air Filter is suited for drivers who want easier breathing and fewer odors in their car without using sprays or fragrances. It’s a practical upgrade for commuters, families, ride-share drivers, and anyone who owns a compatible Ford or Lincoln model and wants a straightforward maintenance item that improves interior comfort and air quality.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Fresh Breeze filter stop wildfire smoke?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It helps capture smoke particles and reduces odor, but performance varies with smoke concentration; replace sooner after heavy exposure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install CF11775 myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Most installations are simple and require basic tools; consult your vehicle manual for exact access and orientation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591467761849,"sku":"B016XE8ERC","price":71.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-fresh-breeze-front-packaging_0c273ebe-8a3e-4f4e-9fab-fd9eaed3c68a.jpg?v=1790552245"},{"product_id":"fram-extra-guard-engine-air-filter-ca11476-replacement-for-honda-acura-multi-layer-media-up-to-12-000-miles","title":"Fram Extra Guard Engine Air Filter CA11476 — Replacement for Honda\/Acura, Multi-Layer Media, Up to 12,000 Miles","description":"\u003cp\u003e\u003cstrong\u003eThe FRAM CA11476 Extra Guard Engine Air Filter is a replacement air filter designed to block road dust and debris, helping preserve engine performance for up to 12,000 miles or two years.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep dirty air out of the intake and help your engine breathe cleaner with this FRAM Extra Guard unit. Built with a reinforced filter material and molded frame, the CA11476 is intended for routine vehicle maintenance and straightforward swapping during service intervals. It fits specific models such as Honda Accord and Acura TLX and is sized to install securely in the factory airbox, delivering reliable filtration without complicated modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this air filter support day-to-day driving?\u003c\/h3\u003e\n\u003cp\u003eThe CA11476 maintains a steady flow of screened air to the engine, which helps preserve fuel delivery balance and throttle responsiveness during everyday use. It won’t alter factory performance but helps the engine work under cleaner conditions between scheduled services.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered media captures airborne dust and road contaminants.\u003c\/li\u003e\n  \u003cli\u003eDesigned to let adequate airflow for normal driving conditions.\u003c\/li\u003e\n  \u003cli\u003eFits the stock airbox to ensure correct installation and sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the filter’s construction durable and effective?\u003c\/h3\u003e\n\u003cp\u003eFRAM uses a multi-layer filter material optimized to trap and retain more particles than many baseline retail filters. The media sits inside a molded frame that resists collapse and keeps the element aligned with the intake to maintain filtration efficiency as contaminants accumulate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-layer filtration media for improved dirt-holding capacity.\u003c\/li\u003e\n  \u003cli\u003eRigid frame keeps the filter’s shape under airflow pressure.\u003c\/li\u003e\n  \u003cli\u003eSealed edges reduce the chance of unfiltered air bypassing the element.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and when should I replace it?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a simple process that typically requires no special tools—remove the old element, seat the new CA11476 into the airbox, and secure the cover. FRAM recommends replacement intervals aligned with normal maintenance: effectively up to 12,000 miles or two years, depending on driving conditions and manufacturer guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick swap compatible with the vehicle’s factory airbox.\u003c\/li\u003e\n  \u003cli\u003eNo adhesives or trimming needed for proper fitment.\u003c\/li\u003e\n  \u003cli\u003eReplace sooner in dusty or severe environments for best protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter work with my car model and what benefits can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe CA11476 is produced to fit a number of vehicles; confirm compatibility with your make and model before purchasing. When correctly matched and installed, you can expect cleaner intake air and a maintained environment for combustion components, which supports consistent engine operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with select Honda Accord and Acura TLX years—verify fitment.\u003c\/li\u003e\n  \u003cli\u003eHelps protect internal intake components from particulate wear.\u003c\/li\u003e\n  \u003cli\u003eSupports steady performance between routine maintenance intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA11476 Extra Guard Engine Air Filter is intended for vehicle owners who perform regular maintenance and want an economical, easy-to-install replacement that improves intake air cleanliness. It’s a practical choice for drivers of compatible Honda Accord and Acura TLX models who prioritize routine engine care and wish to maintain dependable daily driving performance without complex upgrades.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the FRAM CA11476?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace about every 12,000 miles or two years under normal driving; replace sooner in dusty conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the CA11476 compatible with my Honda or Acura?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits specified Honda Accord and Acura TLX models—check your vehicle year and OEM part number before buying.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591513211065,"sku":"B00NIZZZ5Y","price":67.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca11476-front-view.jpg?v=1790553886"},{"product_id":"fram-extra-guard-engine-air-filter-ca10835-for-toyota-4runner-lexus-gx460-direct-fit-enhanced-filtration","title":"Fram Extra Guard Engine Air Filter CA10835 for Toyota 4Runner \/ Lexus GX460 — Direct-Fit, Enhanced Filtration","description":"\u003cp\u003e\u003cstrong\u003eFRAM CA10835 Extra Guard Engine Air Filter is a replacement engine air filter engineered to trap dirt and airborne debris so your Toyota 4Runner, FJ Cruiser or Lexus GX460 breathes cleaner air and maintains consistent performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis FRAM Extra Guard CA10835 is built from advanced filter media tested to provide enhanced particle capture and long service life. It fits a range of Toyota and Lexus models with V6 or V8 4.0–4.6L engines and is designed to be a direct-fit OEM-style replacement for routine maintenance intervals. The design balances airflow and filtration to help support consistent throttle response and reliable day-to-day operation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this air filter help my engine’s daily performance?\u003c\/h3\u003e\n\u003cp\u003eThe CA10835 is designed to maintain clean intake airflow while minimizing restriction. Cleaner air helps the engine run more consistently under normal driving loads and can reduce the buildup of abrasive particles on internal components over time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced media captures common road dust, pollen and debris.\u003c\/li\u003e\n\u003cli\u003eEngineered to preserve airflow for steady throttle response.\u003c\/li\u003e\n\u003cli\u003eDesigned for everyday driving and routine maintenance cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I change the FRAM CA10835 Extra Guard?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends following your vehicle manufacturer’s maintenance schedule; the Extra Guard series is engineered for extended intervals compared with some standard retail filters. Typical guidance is up to 12,000 miles between changes under normal driving, but severe conditions like heavy dust or towing may require earlier replacement.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReference your vehicle owner’s manual for exact interval guidance.\u003c\/li\u003e\n\u003cli\u003eInspect sooner in dusty, off-road, or high-pollution environments.\u003c\/li\u003e\n\u003cli\u003eReplacement restores filtration efficiency and consistent airflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter fit my Toyota 4Runner, FJ Cruiser or Lexus GX460?\u003c\/h3\u003e\n\u003cp\u003eThe CA10835 is made to match the factory airbox dimensions for select model years and engine sizes listed for compatibility. It offers a precision fit to simplify installation and maintain the integrity of the intake system seal.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 2010–2022 Lexus GX460 V8 4.6L.\u003c\/li\u003e\n\u003cli\u003eCompatible with 2010–2022 Toyota 4Runner V6 4.0L and 2010–2014 Toyota FJ Cruiser V6 4.0L.\u003c\/li\u003e\n\u003cli\u003eDirect-fit design works with factory airbox mounting points for straightforward swap-in replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat specific benefits does FRAM Extra Guard filtration provide?\u003c\/h3\u003e\n\u003cp\u003eFRAM’s Extra Guard media was laboratory tested for efficient particle capture while providing a practical dirt-holding capacity for longer use between changes. The design focuses on reliable filtration for everyday driving without compromising installation ease.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTested filter media for enhanced particle removal versus some standard retail filters.\u003c\/li\u003e\n\u003cli\u003eDirt-holding capability helps the filter retain contaminants as they accumulate.\u003c\/li\u003e\n\u003cli\u003ePrecision molding and gasket fit help prevent unfiltered air bypassing the media.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: The FRAM CA10835 Extra Guard Engine Air Filter is aimed at owners of compatible Toyota and Lexus SUVs who want a cost-effective, factory-style replacement that balances filtration efficiency and airflow. It suits drivers who follow regular maintenance schedules, commuters, weekend adventurers, and anyone seeking a straightforward swap-in filter that supports dependable daily performance. If you drive frequently in dusty conditions, inspect and replace the filter more often to preserve engine breathing and long-term intake cleanliness.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the FRAM CA10835 a direct replacement for my 2016 Toyota 4Runner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the CA10835 is a direct-fit replacement for Toyota 4Runner models with a 4.0L V6 within the listed 2010–2022 compatibility range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I go 12,000 miles between changes with this filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Under normal driving FRAM Extra Guard targets extended intervals up to about 12,000 miles, but inspect and replace sooner in severe or dusty conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591515832505,"sku":"B007RW2WWS","price":67.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca10835-front-packaging.jpg?v=1790553989"},{"product_id":"fram-cabin-air-filter-fresh-breeze-cf12450-arm-hammer-baking-soda-odor-neutralizer-traps-dust-pollen","title":"Fram Cabin Air Filter Fresh Breeze CF12450 — Arm \u0026 Hammer baking soda odor neutralizer, traps dust \u0026 pollen","description":"\u003cp\u003e\u003cstrong\u003eFRAM CF12450 Fresh Breeze Cabin Air Filter combines particle filtration with Arm \u0026amp; Hammer baking soda to reduce odors and help keep the vehicle interior smelling fresher while filtering common airborne contaminants.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCabin air quality affects comfort on every drive. The FRAM Fresh Breeze CF12450 is engineered to trap dust, pollen, road grime and other particulates that enter through a vehicle’s HVAC system while using embedded Arm \u0026amp; Hammer baking soda to neutralize odors. This filter is targeted for compatible applications such as Jeep Wrangler and Gladiator models and offers an easy maintenance upgrade to help drivers and passengers breathe and ride in a cleaner-feeling cabin.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Fresh Breeze filter cut down unwanted smells?\u003c\/h3\u003e\n\u003cp\u003eThe CF12450 integrates Arm \u0026amp; Hammer baking soda within the filter media to neutralize odor molecules as air moves through the HVAC system. Rather than simply masking scents, the baking soda helps reduce odor-causing compounds contacting the cabin air. This approach supports a noticeable fresher interior between routine cleanings or professional detailing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEmbedded Arm \u0026amp; Hammer baking soda for natural odor neutralization\u003c\/li\u003e\n  \u003cli\u003eWorks continuously as outside air passes into the cabin\u003c\/li\u003e\n  \u003cli\u003eHelps reduce common vehicle smells from traffic, smoke, and lingering food odors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of particles does this cabin filter capture?\u003c\/h3\u003e\n\u003cp\u003eThe FRAM Fresh Breeze CF12450 is designed to capture common airborne contaminants that travel into the vehicle through vents and HVAC intake points. It helps reduce the concentration of dust, pollen and road particles inside the passenger compartment, which improves perceived air cleanliness during daily use. The design focuses on practical filtration for everyday driving scenarios, including commuting and longer trips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFilters out dirt, dust, and pollen\u003c\/li\u003e\n  \u003cli\u003eHelps trap road film and ambient particles from outdoor air\u003c\/li\u003e\n  \u003cli\u003eDesigned to clear airborne particulates before they circulate through vents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and replacement?\u003c\/h3\u003e\n\u003cp\u003eReplacing the CF12450 follows the same basic steps as most cabin filters: locate the filter housing (often behind the glove box or under the dash), remove the old filter and insert the FRAM Fresh Breeze unit in the correct orientation. No special tools are typically required, and most drivers can complete the job in minutes. Regular replacement as recommended by your vehicle manufacturer helps maintain airflow and filtration performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard drop-in replacement for compatible vehicles\u003c\/li\u003e\n  \u003cli\u003eNo special tools required for most installs\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle manual for housing location and replacement interval\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter affect HVAC airflow or performance?\u003c\/h3\u003e\n\u003cp\u003eThe CF12450 is engineered to balance effective filtration with sufficient airflow for normal HVAC operation. It captures contaminants while allowing air to move through the system, helping maintain comfort settings and defogging performance. For best results, replace filters on a schedule aligned with driving conditions and manufacturer guidance; heavily dusty or smoky environments may require more frequent changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for filtration without excessive airflow restriction\u003c\/li\u003e\n  \u003cli\u003eSupports HVAC comfort functions like defogging and ventilation\u003c\/li\u003e\n  \u003cli\u003eReplace more often in high-pollution or wildfire-affected areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a straightforward cabin air filter upgrade that adds odor-neutralizing power while filtering everyday airborne contaminants. The FRAM CF12450 Fresh Breeze is suited to Jeep Wrangler and Gladiator owners and other drivers seeking a practical way to improve interior air freshness during commutes, errands and road trips without altering HVAC operation. If you frequently encounter pollen, road dust or odors from commuting or seasonal smoke, this filter provides a simple maintenance step to help the cabin feel cleaner.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the FRAM CF12450 cabin filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace annually or according to your vehicle manual; more often in dusty, pollen-heavy, or smoky conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Fresh Breeze filter compatible with my Jeep Gladiator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the CF12450 lists compatibility with Jeep Wrangler and Gladiator models—always verify your vehicle's part number first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591529595065,"sku":"B0CML42FYG","price":71.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-cf12450-front-packaging.jpg?v=1790554395"},{"product_id":"fram-engine-air-filter-ca8039-extra-guard-for-ford-lincoln-12-000-mile-protection-high-efficiency-media","title":"Fram Engine Air Filter CA8039 Extra Guard for Ford \u0026 Lincoln — 12,000-Mile Protection, High-Efficiency Media","description":"\u003cstrong\u003eFRAM CA8039 Extra Guard is a vehicle-specific engine air filter engineered to trap contaminants and maintain airflow for up to 12,000 miles when installed per manufacturer recommendations.\u003c\/strong\u003e\n\n\u003cp\u003eThis FRAM Extra Guard air filter uses an advanced filtration media developed and tested by FRAM engineering labs to provide extended engine protection compared with typical retail-standard filters. Built to meet exact fit specifications for many Ford, Lincoln and select RV\/chassis applications, the CA8039 balances particle capture with consistent airflow to help preserve acceleration and overall engine performance between service intervals. Follow your vehicle owner's manual for correct change intervals and installation steps.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the CA8039 improve engine protection?\u003c\/h3\u003e\n\u003cp\u003eThe CA8039 uses a layered, high-efficiency media designed to trap a broad range of airborne particles before they reach the engine intake. In FRAM testing under ISO 5011 protocols, this Extra Guard media delivered greater contaminant capture than comparable standard retail filters, helping reduce the risk of abrasive wear and preserving engine components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced multi-layer filter media for improved particle retention\u003c\/li\u003e\n  \u003cli\u003eEngineered pleat pattern to maximize surface area and capture efficiency\u003c\/li\u003e\n  \u003cli\u003eDurable rubber sealing edges to prevent bypass and preserve filtration\u003c\/li\u003e\n  \u003cli\u003eTested under ISO 5011 for comparative performance metrics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter fit my vehicle and how do I confirm compatibility?\u003c\/h3\u003e\n\u003cp\u003eFRAM CA8039 is vehicle-specific and fits a wide range of Ford E-series, F-series, Expedition, Mustang, Lincoln, and many Ford-based RV chassis from selected model years. Use your vehicle year, make, model and engine size to verify fit, or cross-reference OEM part numbers and the compatibility list provided by the retailer before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for specific Ford and Lincoln engines (see compatibility list)\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle year and engine displacement against product listing\u003c\/li\u003e\n  \u003cli\u003eLook for a secure, OEM-style flange and seal when installed\u003c\/li\u003e\n  \u003cli\u003eContact seller with VIN for precise fit confirmation if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the CA8039 and what performance can I expect?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends replacing this Extra Guard air filter approximately every 12,000 miles under typical driving conditions, or sooner if you frequently drive in dusty or harsh environments. Regularly replacing the filter helps maintain throttle response, fuel efficiency tendencies, and steady airflow to the engine between services.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12,000-mile suggested change interval under normal conditions\u003c\/li\u003e\n  \u003cli\u003eInspect more frequently in dusty, off-road or construction-area use\u003c\/li\u003e\n  \u003cli\u003eReplacement helps avoid reduced acceleration and potential power loss\u003c\/li\u003e\n  \u003cli\u003eLightweight, vehicle-specific fit simplifies routine service access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical details and installation considerations?\u003c\/h3\u003e\n\u003cp\u003eThe CA8039 arrives in a compact package with a molded rubber sealing flange and precisely formed pleats for maximum media area. Installation is straightforward for most users: remove the old filter, clean the housing, seat the new filter firmly in the inlet, and ensure a continuous seal around the perimeter to prevent unfiltered air entry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eItem package dimensions: 19.812 cm L x 21.59 cm W x 21.59 cm H\u003c\/li\u003e\n  \u003cli\u003eItem package weight: 0.363 kg — light and easy to handle\u003c\/li\u003e\n  \u003cli\u003eFit type: Vehicle specific — matches OEM inlet geometry\u003c\/li\u003e\n  \u003cli\u003eSimple swap-in replacement using factory housing and clips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: The FRAM CA8039 Extra Guard air filter suits drivers and fleet owners who operate compatible Ford, Lincoln or Ford-chassis RVs and require a reliable, vehicle-specific replacement that balances capture efficiency with airflow. It is ideal for DIY maintenance enthusiasts, independent mechanics, and service shops looking for an economical, tested filter to support routine engine protection and consistent performance between scheduled services.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the FRAM CA8039 compatible with my Ford E-150 or F-150?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The CA8039 fits many Ford E- and F-series models listed by year and engine; verify compatibility with your vehicle year and engine size before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I change the FRAM CA8039?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace approximately every 12,000 miles under normal driving, and inspect sooner in dusty or severe conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591534280889,"sku":"B0009H51WQ","price":75.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca8039-front-packaging.jpg?v=1790554647"},{"product_id":"fram-engine-air-filter-ca11945-for-2015-2016-honda-cr-v-2-4l-extra-guard-iso-tested-protection","title":"Fram Engine Air Filter CA11945 for 2015-2016 Honda CR-V 2.4L - Extra Guard, ISO-tested protection","description":"\u003cp\u003e\u003cstrong\u003eFRAM CA11945 Extra Guard Engine Air Filter is a vehicle-specific replacement filter engineered to trap contaminants and help preserve engine performance for compatible 2015–2016 Honda CR-V 2.4L models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned and tested in FRAM engineering laboratories, the CA11945 uses advanced filter media to deliver stronger particulate capture versus typical standard retail filters. FRAM reports up to twice the engine protection in comparative ISO 5011 testing and recommends change intervals aligned with your vehicle owner’s manual; many drivers replace at roughly every 12,000 miles to help maintain acceleration and overall performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the CA11945 protect my engine on everyday drives?\u003c\/h3\u003e\n\u003cp\u003eThe engineered media captures dust, pollen, exhaust soot and other airborne particles before they reach the intake system, reducing abrasive wear on internal components. Good filtration helps preserve airflow balance so the engine can breathe efficiently without pulling contaminated air.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced multi-fiber filter media tested under ISO 5011 standards\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit the OEM airbox for 2015–2016 Honda CR-V 2.4L\u003c\/li\u003e\n  \u003cli\u003eReduces intake of damaging particulates to protect moving parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter affect my vehicle’s performance or fuel economy?\u003c\/h3\u003e\n\u003cp\u003eWhen replaced at recommended intervals, a clean FRAM Extra Guard filter helps maintain steady airflow and throttle response, which supports consistent engine performance. While it’s not a performance upgrade, proper filtration prevents gradual restriction that can reduce acceleration and efficiency over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps prevent airflow restriction caused by clogged filters\u003c\/li\u003e\n  \u003cli\u003eSupports consistent acceleration by keeping intake clean\u003c\/li\u003e\n  \u003cli\u003eMaintenance-friendly design for straightforward replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the CA11945 and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eFRAM suggests following the vehicle manufacturer’s schedule; many drivers use a 12,000-mile interval as a practical guideline to avoid decreased engine performance. Installation is typically simple: open the airbox, remove the old filter, and fit the CA11945 into the OEM housing—no special tools required for most CR-V airboxes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace per owner’s manual or roughly every 12,000 miles as a common interval\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design for hassle-free swap into the stock airbox\u003c\/li\u003e\n  \u003cli\u003eNo adhesives or modifications needed—vehicle-specific fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the CA11945 compatible with my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThis FRAM Extra Guard model is made to match the fit and specifications for the 2015–2016 Honda CR-V with the 2.4L engine. Always confirm compatibility by checking your owner’s manual or the vehicle fitment guide before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpecifically listed for 2015–2016 Honda CR-V 2.4L applications\u003c\/li\u003e\n  \u003cli\u003eVehicle-specific fit minimizes installation errors and air leaks\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet OEM mounting points and sealing surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The FRAM CA11945 Extra Guard Engine Air Filter is ideal for Honda CR-V 2.4L owners who prefer a ready-to-install, vehicle-specific replacement that emphasizes reliable particulate capture and straightforward maintenance. It suits everyday drivers, routine maintenance DIYers, and service shops looking for a tested aftermarket filtration option that aligns with common change intervals and OEM fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the CA11945 the correct filter for a 2015 Honda CR-V 2.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The FRAM CA11945 is specified for 2015–2016 Honda CR-V 2.4L models; confirm with your owner’s manual before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I change the FRAM Extra Guard CA11945?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow the vehicle manufacturer’s schedule; many owners replace around every 12,000 miles as a practical guideline.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591635206329,"sku":"B01MRZ2161","price":67.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca11945-front-packaging.jpg?v=1790556660"},{"product_id":"fram-fresh-breeze-cabin-air-filter-cf10743-arm-hammer-baking-soda-odor-control-particle-filtration","title":"Fram Fresh Breeze Cabin Air Filter CF10743 — Arm \u0026 Hammer baking soda odor control, particle filtration","description":"\u003cb\u003eFRAM CF10743 Fresh Breeze is a cabin air filter that combines particle filtration with Arm \u0026amp; Hammer baking soda to help reduce odors and improve in-vehicle air quality.\u003c\/b\u003e\n\n\u003cp\u003eCabin air quality affects comfort on every drive. The FRAM Fresh Breeze CF10743 is designed to trap dust, pollen, and road debris while using embedded Arm \u0026amp; Hammer baking soda to neutralize common odors that enter through heating, ventilation, and air-conditioning (HVAC) systems. It’s an easy maintenance upgrade that targets both airborne particles and cabin smells without changing your ventilation settings.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter reduce odors inside my car?\u003c\/h3\u003e\n\u003cp\u003eThe CF10743 uses FRAM’s Fresh Breeze technology, which embeds Arm \u0026amp; Hammer baking soda into the filter media to capture and neutralize odor-causing molecules as air passes through. This is not a perfume or masking agent; it works by interacting with odor compounds to lessen their presence in the cabin air.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEmbedded baking soda media neutralizes many common smells from traffic, food, and exhaust.\u003c\/li\u003e\n  \u003cli\u003eWorks continuously while the HVAC system circulates air.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain a fresher-feeling interior without adding scents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the FRAM CF10743 improve the air my passengers breathe?\u003c\/h3\u003e\n\u003cp\u003eThis filter is designed to capture common airborne particles that enter through exterior air intakes, such as dirt, pollen, and some road debris. By reducing these particles, the cabin can feel cleaner and occupants may notice less dust settling on surfaces during normal driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-layer media targets dust, pollen, and larger particulate contaminants.\u003c\/li\u003e\n  \u003cli\u003eInstalled in the HVAC intake to filter incoming air before it reaches passengers.\u003c\/li\u003e\n  \u003cli\u003eSupports a cleaner-feeling cabin for daily commutes and longer trips.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know if CF10743 fits my vehicle and when to replace it?\u003c\/h3\u003e\n\u003cp\u003eFRAM provides vehicle compatibility information for the CF10743 model; it fits a range of cars, trucks, and vans from several manufacturers. Check your owner’s manual or FRAM fitment guide to confirm compatibility. For performance, follow the vehicle manufacturer’s recommended replacement interval or replace yearly for typical driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with select Dodge, Chrysler, Nissan, Infiniti, Ram, and Volkswagen models.\u003c\/li\u003e\n  \u003cli\u003eRefer to the vehicle’s manual or FRAM fit guide for exact fitment details.\u003c\/li\u003e\n  \u003cli\u003eReplace per manufacturer suggestions or during annual HVAC checks for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits will I notice after installing this cabin filter?\u003c\/h3\u003e\n\u003cp\u003eAfter installing the CF10743, many drivers report a fresher cabin atmosphere and reduced dust accumulation on interior surfaces. While it doesn’t cure severe air quality issues, it provides straightforward, maintenance-friendly improvements in daily comfort.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLess noticeable vehicle interior odors during normal driving.\u003c\/li\u003e\n  \u003cli\u003eReduced dust and pollen being introduced through the HVAC system.\u003c\/li\u003e\n  \u003cli\u003eSimple swap-in installation in the factory cabin filter slot—no tools for many models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CF10743 Fresh Breeze cabin air filter is suited for drivers who want a no-fuss way to reduce incoming odors and capture common airborne particles without adding fragrances. It’s a practical choice for commuters, families, and anyone who spends time in traffic or frequently transports passengers and pets. Match the CF10743 to your vehicle using FRAM’s fitment chart to ensure correct installation and optimal performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the FRAM CF10743 remove pollen?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It filters common airborne particles such as pollen and dust, helping reduce the amount entering the cabin.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the Fresh Breeze cabin filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace it according to your vehicle’s maintenance schedule or about once a year under normal driving conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591662010553,"sku":"B00A0GIJHA","price":71.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-cf10743-front-packaging.jpg?v=1790557122"},{"product_id":"fram-extra-guard-engine-air-filter-ca9683-for-toyota-4-0l-v6-direct-fit-high-performance-multi-layer-media","title":"Fram Extra Guard Engine Air Filter CA9683 for Toyota 4.0L V6 — Direct-Fit, High-Performance Multi-Layer Media","description":"\u003cp\u003e\u003cstrong\u003eFRAM CA9683 Extra Guard Engine Air Filter is a direct-fit replacement air filter designed to help keep dirt and debris out of your 4.0L V6 engine while supporting consistent airflow for reliable performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis FRAM Extra Guard filter is engineered with a multi-layer filtration media developed and tested by FRAM to offer enhanced particulate capture compared with many standard retail filters. Built as a direct replacement for specific Toyota 4.0L V6 applications, it fits factory housings and includes on-pack instructions to make swapping the element straightforward at regular maintenance intervals.\u003c\/p\u003e\n\n\u003ch3\u003eWill this filter fit my Toyota 4.0L V6?\u003c\/h3\u003e\n\u003cp\u003eThe FRAM CA9683 is made to match OEM dimensions and mounting for a range of Toyota models equipped with the 4.0L V6. Check your vehicle year and engine code to confirm compatibility before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Toyota 4Runner (2003–2009) V6 4.0L\u003c\/li\u003e\n  \u003cli\u003eFits Toyota FJ Cruiser (2007–2009) V6 4.0L\u003c\/li\u003e\n  \u003cli\u003eFits Toyota Tacoma (2005–2015) V6 4.0L and Tundra (2005–2010) V6 4.0L\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design installs into the factory airbox without modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the CA9683 Extra Guard air filter?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends following your vehicle manufacturer’s maintenance schedule and the on-pack instructions for best results. The Extra Guard is designed to perform well up to typical service intervals, and FRAM testing supports extended protection compared with many standard retail options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChange intervals: follow vehicle owner’s manual recommendations\u003c\/li\u003e\n  \u003cli\u003eFRAM notes performance over typical retail filters across tested models\u003c\/li\u003e\n  \u003cli\u003eInspect the filter during regular servicing or if driving in dusty conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect from this air filter?\u003c\/h3\u003e\n\u003cp\u003eThe CA9683 is engineered to reduce the amount of dust and contaminants entering the engine while preserving steady airflow. Cleaner intake air helps the engine run as intended and can help maintain acceleration and load response compared with a clogged or degraded element.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced filter media captures more particulates than many standard retail filters\u003c\/li\u003e\n  \u003cli\u003eMaintains airflow characteristics important for engine response\u003c\/li\u003e\n  \u003cli\u003eOn-pack illustration simplifies correct installation and orientation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and inspection?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a simple, at-home maintenance task for most owners—no special tools are required beyond basic hand tools for opening the airbox. The package includes directions, and routine visual checks let you gauge when replacement is needed sooner than scheduled due to severe driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit element for factory airbox housings\u003c\/li\u003e\n  \u003cli\u003eOn-pack diagrams show step-by-step installation guidance\u003c\/li\u003e\n  \u003cli\u003eQuick visual inspection can reveal heavy soiling or damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA9683 Extra Guard Engine Air Filter is intended for Toyota owners with a 4.0L V6 (specific year ranges listed above) who want an easy-to-install replacement that aims to capture more particulates than many standard retail filters. It’s a practical choice for drivers who perform routine maintenance themselves or technicians seeking a dependable, OEM-fit filtration option for everyday driving and moderate off-road use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the CA9683 fit my 2008 Toyota Tacoma V6?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the CA9683 is compatible with 2005–2015 Toyota Tacoma models equipped with the 4.0L V6.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this filter myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s a direct-fit element with on-pack instructions and typically requires only basic hand tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591701299385,"sku":"B000A0CAWQ","price":67.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca9683-front-packaging.jpg?v=1790557880"},{"product_id":"fram-extra-guard-engine-air-filter-ca12166-for-gm-suvs-crossovers-12-000-mile-protection-improved-particle-capture","title":"Fram Extra Guard Engine Air Filter CA12166 for GM SUVs \u0026 Crossovers — 12,000‑mile protection, improved particle capture","description":"\u003cp\u003e\u003cstrong\u003eThe FRAM CA12166 Extra Guard Engine Air Filter is a replacement engine air filter engineered to capture contaminants and help maintain consistent engine airflow for up to 12,000 miles between changes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Extra Guard filter uses advanced filtration media formulated and tested by FRAM to provide enhanced particle capture versus many standard retail-brand filters. Built for everyday driving, the CA12166 balances dirt-holding capacity and airflow to support steady engine operation across a range of GM SUVs and crossovers. Installation is straightforward thanks to a precision fit designed for the specified factory airbox housings.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the CA12166 help keep engine performance steady?\u003c\/h3\u003e\n\u003cp\u003eThe filter is designed to trap dust and airborne particles while still allowing the air volume needed for regular driving conditions. Cleaner intake air helps sustain throttle response and consistent power delivery as contaminants accumulate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered media that balances filtration and airflow for routine driving.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce dirt entering the intake to protect internal components.\u003c\/li\u003e\n  \u003cli\u003eDirt-holding capacity maintains effectiveness between service intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection level and testing back the Extra Guard series?\u003c\/h3\u003e\n\u003cp\u003eFRAM’s Extra Guard media has been laboratory tested against common standard retail-brand filters and shows improved particle capture in FRAM’s comparative testing. Results indicate roughly two times the protection for selected model comparisons under ISO test conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTested under ISO 5011 protocols for filtration efficiency comparisons.\u003c\/li\u003e\n  \u003cli\u003eFRAM’s testing compared multiple Extra Guard models versus standard retail equivalents.\u003c\/li\u003e\n  \u003cli\u003eDesigned to deliver measurable improvement in contaminant capture for typical driving environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the CA12166 and what happens if I don’t?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends following your vehicle manufacturer’s change intervals; the Extra Guard is designed to perform effectively for roughly 12,000 miles under normal driving. Extending beyond recommended intervals can increase restriction, which may reduce throttle response and overall airflow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical guidance: up to about 12,000 miles between changes for normal conditions.\u003c\/li\u003e\n  \u003cli\u003eReplace sooner in dusty or severe driving environments.\u003c\/li\u003e\n  \u003cli\u003eRoutine checks help ensure filter integrity and consistent engine breathing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles fit this specific CA12166 filter?\u003c\/h3\u003e\n\u003cp\u003eThe CA12166 is manufactured to fit designated GM SUVs and crossovers where that part number is specified. A precise seal and correct dimensions help ensure an accurate fit in the intended airbox design for simple installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with select Chevrolet Traverse and Blazer models.\u003c\/li\u003e\n  \u003cli\u003eFits GMC Acadia and certain Buick Enclave applications where CA12166 applies.\u003c\/li\u003e\n  \u003cli\u003eAlso used in some Cadillac XT5 and XT6 models—refer to vehicle parts list to confirm fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA12166 Extra Guard is aimed at drivers of compatible Chevrolet, GMC, Buick, and Cadillac models who want a straightforward replacement that emphasizes contaminant capture without sacrificing normal airflow. It’s a practical choice for vehicle owners seeking a tested aftermarket filter with easier installation and predictable service intervals for daily driving and light-duty use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I change the FRAM CA12166 Extra Guard filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow your vehicle’s owner manual, but FRAM designs this filter for approximately 12,000 miles under normal driving; replace sooner in dusty conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the CA12166 fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle’s parts list or OEM part number compatibility; CA12166 fits specific Chevrolet, GMC, Buick, and Cadillac models where specified.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591728038073,"sku":"B07V8WC78G","price":75.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca12166-front-packaging.jpg?v=1790558349"},{"product_id":"fram-extra-guard-engine-air-filter-ca8756-for-gm-trucks-and-suvs-fits-4-3l-8-1l-v6-v8-12-000-mile-protection","title":"Fram Extra Guard Engine Air Filter CA8756 for GM Trucks and SUVs — Fits 4.3L–8.1L V6\/V8, 12,000-Mile Protection","description":"\u003cstrong\u003eFRAM CA8756 Extra Guard is a replacement engine air filter engineered to trap road dust and airborne debris, delivering up to two years or 12,000 miles of protection for compatible GM trucks and SUVs.\u003c\/strong\u003e\n\n\u003cp\u003eThis FRAM Extra Guard unit uses a layered filter media designed to capture more contaminant particles than many standard retail options while maintaining proper airflow to the engine. It’s manufactured to match factory dimensions so installation is straightforward, and the element supports routine maintenance intervals typical of everyday driving. The CA8756 is suited for a wide range of General Motors vehicles including Chevrolet, GMC and Cadillac full-size trucks and SUVs across multiple model years.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this air filter help my engine’s day-to-day performance?\u003c\/h3\u003e\n\u003cp\u003eThe Extra Guard media screens out dirt and road particulates that can reduce airflow and cause buildup in the intake system. By keeping the intake air cleaner, the engine breathes more freely which helps with steady power delivery and consistent throttle response over time. It’s not a performance upgrade part, but it helps preserve factory performance and operating reliability between service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced media captures and holds common roadway dust and debris.\u003c\/li\u003e\n  \u003cli\u003eHelps preserve designed airflow for steady engine operation.\u003c\/li\u003e\n  \u003cli\u003eSupports consistent acceleration and throttle response under normal use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter fit my Chevrolet, GMC or Cadillac model?\u003c\/h3\u003e\n\u003cp\u003eThe CA8756 is produced to match original equipment dimensions for many GM V6 and V8 applications. Compatibility spans numerous model years of Silverado, Sierra, Tahoe, Suburban, Avalanche, Yukon and Escalade families—verify fit by year and engine size before purchase. Fitment ensures the filter seats correctly in the intake box for reliable filtration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for specific GM 4.3L–8.1L V6\/V8 engine configurations.\u003c\/li\u003e\n  \u003cli\u003eCovers Silverado, Sierra, Tahoe, Suburban, Yukon, Avalanche and Escalade variants.\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle year and engine code to confirm direct replacement fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will this FRAM Extra Guard filter last, and when should I replace it?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends up to two years or 12,000 miles of protection under typical driving conditions for this Extra Guard element. Actual service life depends on driving environment—dusty or off-road use may require more frequent changes. Inspect the filter during routine maintenance and replace it when visually dirty or at the manufacturer’s interval.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated protection: up to 2 years or 12,000 miles under normal driving.\u003c\/li\u003e\n  \u003cli\u003eShorten interval for dusty, construction, or off-road conditions.\u003c\/li\u003e\n  \u003cli\u003eVisual inspection during oil changes helps determine replacement timing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I expect during the swap?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically quick and simple because the CA8756 is made to OEM dimensions for a direct fit in the vehicle’s airbox. Generally only basic hand tools are required to open the intake housing and remove the old element. Proper seating of the new filter and a secure airbox seal are important to ensure filtration effectiveness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for easy, tool-light installation.\u003c\/li\u003e\n  \u003cli\u003eReplace during routine service or when filter shows visible contamination.\u003c\/li\u003e\n  \u003cli\u003eEnsure the airbox closes fully and seals around the filter edge for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA8756 Extra Guard is aimed at owners of compatible Chevrolet, GMC and Cadillac trucks and SUVs who want a dependable, OEM-shaped replacement filter that balances filtration efficiency and airflow for everyday driving. It suits drivers who perform routine maintenance themselves as well as service shops stocking common GM replacement parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is FRAM CA8756 compatible with my Silverado or Sierra?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The CA8756 fits many Silverado and Sierra model years and engine sizes—check your vehicle year and engine code against the compatibility list before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace this FRAM air filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: FRAM rates this filter for up to 2 years or 12,000 miles under normal driving; replace sooner in dusty or heavy-use conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591729348793,"sku":"B0009H51Z8","price":67.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca8756-front-view.jpg?v=1790558371"},{"product_id":"fram-extra-guard-engine-air-filter-ca12167-for-mazda-up-to-12-000-mile-protection-multi-layer-media","title":"Fram Extra Guard Engine Air Filter CA12167 for Mazda - Up to 12,000-Mile Protection, Multi-Layer Media","description":"\u003cstrong\u003eFRAM CA12167 Extra Guard is an engineered engine air filter built to trap harmful particles and help preserve engine performance for up to 12,000 miles between changes.\u003c\/strong\u003e\n\n\u003cp\u003eThis Extra Guard air filter from FRAM uses a multi-layer filter medium developed in FRAM engineering labs and tested against standard retail equivalents. Testing indicates models in the Extra Guard line showed roughly twice the particle-capturing efficiency compared with average standard retail filters under ISO 5011 test conditions. The CA12167 is designed for everyday driving and fits many Mazda models, offering a combination of contaminant control, dirt-holding capacity, and a precision fit to simplify routine maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the CA12167 support engine performance during daily driving?\u003c\/h3\u003e\n\u003cp\u003eThe CA12167 helps maintain consistent airflow to the intake so the engine can operate closer to its designed power and efficiency levels. Cleaner intake air reduces the likelihood of performance loss due to clogged or saturated filtration media.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintains airflow stability to support consistent acceleration and responsiveness.\u003c\/li\u003e\n  \u003cli\u003eDesigned for routine driving conditions and typical road dust levels.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce early loss of horsepower associated with heavily contaminated filters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of particle protection and dirt capacity does this filter provide?\u003c\/h3\u003e\n\u003cp\u003eFRAM engineered the filter media to capture and retain a wide range of airborne contaminants including dust, pollen, and road debris. The material is constructed to hold collected dirt without rapidly restricting airflow, preserving filtration effectiveness as it accumulates particles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-layer media traps both large and fine particulates.\u003c\/li\u003e\n  \u003cli\u003eHigh dirt-holding design reduces frequency of premature clogging.\u003c\/li\u003e\n  \u003cli\u003eTested for efficiency under ISO 5011 protocols against standard retail models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward and will it fit my Mazda?\u003c\/h3\u003e\n\u003cp\u003eThe CA12167 is built to match original equipment dimensions for a precise fit in compatible vehicles, making replacement fast and straightforward for most users. Proper fit helps ensure the filter seals correctly in the intake housing so air only flows through the filter media.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for an accurate OEM-style fit into the intake box.\u003c\/li\u003e\n  \u003cli\u003eInstallation typically requires basic hand tools and minimal time.\u003c\/li\u003e\n  \u003cli\u003eCompatible with several Mazda models such as CX-9, CX-5, and Mazda6—verify part number against your vehicle before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I change the FRAM Extra Guard CA12167?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends up to 12,000 miles between changes under typical driving conditions, but actual intervals depend on your driving environment and manufacturer guidance. Heavy dust, off-road use, or polluted urban conditions may require more frequent replacement to maintain performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard guidance: up to 12,000 miles for normal driving conditions.\u003c\/li\u003e\n  \u003cli\u003eCheck the vehicle owner’s manual and driving conditions to adjust intervals.\u003c\/li\u003e\n  \u003cli\u003eInspect the filter visually during routine service and replace if heavily soiled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The FRAM CA12167 Extra Guard is suited to drivers who want an affordable, engineered replacement air filter that balances filtration efficiency, dirt-holding capacity, and a precise fit. It’s a practical choice for owners of compatible Mazda vehicles who perform routine maintenance and want a tested aftermarket option that aims to preserve intake cleanliness and support steady engine operation between service intervals.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the CA12167 fit my Mazda CX-5?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, CA12167 is compatible with many Mazda CX-5 model years—confirm fit by checking your vehicle’s part number or owner’s manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long can I drive before replacing this air filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: FRAM recommends up to 12,000 miles under normal conditions, but replace sooner if you drive in very dusty or polluted environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591769620665,"sku":"B09F71GY14","price":67.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca12167-front-view-packaging.jpg?v=1790558415"},{"product_id":"fram-fresh-breeze-cabin-air-filter-cf11819-baking-soda-odor-control-pleated-particle-filtration","title":"Fram Fresh Breeze Cabin Air Filter CF11819 — Baking Soda Odor Control, Pleated Particle Filtration","description":"\u003cp\u003e\u003cstrong\u003eFRAM CF11819 Fresh Breeze is a cabin air filter that combines particle filtration with Arm \u0026amp; Hammer baking soda to reduce odors and help keep the vehicle’s interior air feeling cleaner.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCabin air quality affects comfort during daily drives, commuting and longer trips. The FRAM Fresh Breeze CF11819 is designed for compatible Chevrolet, GMC, Hyundai, Kia and Saturn models and pairs a pleated filter media with Arm \u0026amp; Hammer’s natural deodorizing agent to capture common airborne particles and reduce unwanted smells passing through the ventilation system.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter improve air inside my car?\u003c\/h3\u003e\n\u003cp\u003eThe CF11819 traps particles such as dust, pollen and road debris as outside air passes through the HVAC intake. Its pleated media captures many common contaminants while the embedded Arm \u0026amp; Hammer baking soda helps neutralize odors so cabin air smells fresher.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCaptures dirt, dust and pollen to reduce visible particulates\u003c\/li\u003e\n  \u003cli\u003eEmbedded baking soda helps neutralize common odors\u003c\/li\u003e\n  \u003cli\u003ePleated design increases surface area for more efficient filtering\u003c\/li\u003e\n  \u003cli\u003eInstalled in-line with the vehicle’s ventilation system for continuous protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eFRAM CF11819 fits a range of popular models across Chevrolet, GMC, Hyundai, Kia and Saturn. Always check the vehicle application list or your owner’s manual to confirm fitment for specific model years and trims before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet Equinox (2010–2017) and Captiva Sport (2011–2015)\u003c\/li\u003e\n  \u003cli\u003eGMC Terrain (2010–2017)\u003c\/li\u003e\n  \u003cli\u003eHyundai Sonata (2011–2015), Azera (2012–2017), Santa Fe\/Santa Fe Sport\/Santa Fe XL (2012–2019)\u003c\/li\u003e\n  \u003cli\u003eKia Optima (2011–2015), Cadenza (2014–2016), Sedona (2011–2021) and Saturn Vue (2008–2010)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the Fresh Breeze cabin air filter?\u003c\/h3\u003e\n\u003cp\u003eReplacement frequency depends on driving conditions and local air quality. As a general guideline, inspect or replace the cabin air filter at regular service intervals or whenever airflow, odor, or HVAC performance changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck the filter at every routine maintenance visit or at least once a year\u003c\/li\u003e\n  \u003cli\u003eReplace sooner if exposed to heavy pollen, wildfire smoke, construction dust, or prolonged dusty roads\u003c\/li\u003e\n  \u003cli\u003eSigns to change: reduced airflow, visible dirt on the filter, or persistent interior odors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Fresh Breeze technology differ from standard cabin filters?\u003c\/h3\u003e\n\u003cp\u003eIn addition to particle filtration, Fresh Breeze integrates Arm \u0026amp; Hammer baking soda into the media to help neutralize odors that pass through the ventilation system. This approach focuses on reducing smells while still filtering the types of airborne particles that commonly enter vehicle cabins.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-action design: particle capture plus odor neutralization\u003c\/li\u003e\n  \u003cli\u003eMaintains similar installation and service intervals as standard filters\u003c\/li\u003e\n  \u003cli\u003eHelps improve perceived freshness without adding fragrances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CF11819 Fresh Breeze cabin air filter is for drivers who want a straightforward upgrade to cabin filtration that also addresses odor—ideal if you routinely drive in urban areas, near pollen sources, on dusty roads, or simply prefer a fresher-feeling interior. It’s a practical replacement option for owners of compatible Chevrolet, GMC, Hyundai, Kia and Saturn vehicles who want an easy-to-install filter with added deodorizing properties.\u003c\/p\u003e\n\n\u003cp\u003eProduct features include odor neutralization powered by Arm \u0026amp; Hammer baking soda, particle filtration to reduce dust and pollen, and a Fresh Breeze design that balances cleanliness and cabin comfort. Always confirm vehicle fitment before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does FRAM CF11819 reduce odors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It uses Arm \u0026amp; Hammer baking soda embedded in the media to help neutralize common odors entering the cabin.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which vehicles are compatible with this filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits select Chevrolet, GMC, Hyundai, Kia and Saturn models listed for model years shown; verify with your vehicle’s manual.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591811203257,"sku":"B00UM9UCE8","price":62.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-cf11819-front-packaging.jpg?v=1790558689"},{"product_id":"fram-fresh-breeze-cabin-air-filter-cf11776-for-nissan-infiniti-arm-hammer-odor-neutralizing-traps-pollen-and-dust","title":"Fram Fresh Breeze Cabin Air Filter CF11776 for Nissan \u0026 Infiniti — Arm \u0026 Hammer odor neutralizing, traps pollen and dust","description":"\u003cp\u003e\u003cstrong\u003eThe FRAM CF11776 Fresh Breeze Cabin Air Filter uses Arm \u0026amp; Hammer baking soda embedded in the media to neutralize odors while trapping dust, pollen and common airborne particles entering your vehicle.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCabin air quality matters for comfort and visibility during everyday driving, commutes and road trips. The FRAM CF11776 Fresh Breeze combines mechanical filtration with odor-neutralizing baking soda sourced from Arm \u0026amp; Hammer to help reduce smells and filter particulate contaminants before they circulate through your car’s HVAC system. Designed to fit specific Nissan and Infiniti models, this filter provides a straightforward upgrade when your factory cabin filter becomes clogged or starts to smell.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter reduce odors inside my car?\u003c\/h3\u003e\n\u003cp\u003eThe Fresh Breeze media is formulated with Arm \u0026amp; Hammer baking soda embedded directly into the filter fibers, which helps neutralize common odors that enter through the ventilation system. Rather than only masking smells, the baking soda works as a deodorizing agent within the filter matrix while air passes through.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEmbedded Arm \u0026amp; Hammer baking soda for neutralization, not fragrance\u003c\/li\u003e\n  \u003cli\u003eMedia designed to trap odor-carrying particles\u003c\/li\u003e\n  \u003cli\u003eWorks continuously while the ventilation system circulates air\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of particles and contaminants does this cabin filter capture?\u003c\/h3\u003e\n\u003cp\u003eThe FRAM Fresh Breeze is engineered to capture a wide range of common airborne contaminants including dust, pollen, road dirt and smoke particles that can enter through the vehicle’s intake. While not a medical-grade purifier, it significantly reduces the volume of particulates that reach the passenger compartment compared with a deteriorated or missing filter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps reduce pollen and allergen-carrying particles\u003c\/li\u003e\n  \u003cli\u003eTraps road dust and vehicle exhaust particulates\u003c\/li\u003e\n  \u003cli\u003eHelps limit smoke and outdoor particulate intrusion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles is the FRAM CF11776 compatible with and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe CF11776 is sized and shaped to replace the factory cabin filter in select Nissan and Infiniti models. Installation is typically a quick, tool-minimal service located behind the glove box or under the dash, making it an easy DIY maintenance item for most owners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Nissan Altima, Murano, Pathfinder, Maxima\u003c\/li\u003e\n  \u003cli\u003eAlso fits INFINITI QX60 and JX35 where specified\u003c\/li\u003e\n  \u003cli\u003eSimple replacement process; often accessible without mechanic service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the Fresh Breeze cabin filter?\u003c\/h3\u003e\n\u003cp\u003eReplacement frequency depends on driving conditions and local air quality; drivers in urban or wildfire-prone areas may need more frequent changes. As a general guideline, inspect the filter at regular service intervals and replace when visibly dirty or when odors and airflow issues become noticeable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect at routine maintenance intervals (e.g., every 12,000–15,000 miles as a reference)\u003c\/li\u003e\n  \u003cli\u003eReplace sooner in heavy-pollution, dusty, or wildfire-affected regions\u003c\/li\u003e\n  \u003cli\u003eSwap if you notice persistent odors or reduced HVAC airflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CF11776 Fresh Breeze Cabin Air Filter is intended for drivers of compatible Nissan and INFINITI models who want an easy-to-install, cost-effective way to reduce cabin odors and lower the amount of dust and pollen entering the passenger compartment. It’s a practical upgrade for commuters, families and anyone seeking fresher-smelling air inside their vehicle without relying on sprays or fragrances.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this filter stop wildfire smoke from entering my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It helps reduce smoke particles and odors but is not a medical-grade smoke purifier. Replace more often during wildfire events for best effect.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the FRAM CF11776 myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Most owners can replace it quickly with minimal tools; it’s commonly located behind the glove box or under the dash.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67591843217593,"sku":"B016XE8FZS","price":72.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-cf11776-front-packaging.jpg?v=1790559215"},{"product_id":"fram-extra-guard-ca9997-engine-air-filter-for-subaru-direct-fit-12-000-mile-protection","title":"Fram Extra Guard CA9997 Engine Air Filter for Subaru — Direct-Fit, 12,000-Mile Protection","description":"\u003cp\u003e\u003cstrong\u003eFRAM CA9997 Extra Guard Engine Air Filter is a direct-fit replacement designed to block road dust and debris, helping preserve engine airflow and performance for up to 12 months or 12,000 miles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for regular driving conditions, the FRAM Extra Guard uses a durable, advanced media to trap more contaminants than many standard retail filters. It’s engineered to fit a wide range of Subaru engines — from the Outback and Forester to the WRX and Tribeca — and installs quickly for routine maintenance that helps restore horsepower, throttle response, and consistent engine breathing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter improve everyday engine performance?\u003c\/h3\u003e\n\u003cp\u003eBy reducing the amount of dirt and particles entering the intake, the CA9997 helps the engine maintain cleaner airflow. Cleaner intake air supports steady acceleration and can help the engine run closer to its intended design parameters during normal driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced filter media captures more airborne dirt and dust than many standard options.\u003c\/li\u003e\n  \u003cli\u003eRestores proper airflow to help maintain throttle response and engine torque.\u003c\/li\u003e\n  \u003cli\u003eDesigned for typical daily use — balanced protection without restrictive flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of protection and lifespan can I expect?\u003c\/h3\u003e\n\u003cp\u003eFRAM rates this Extra Guard model for protection up to 12 months or 12,000 miles under standard driving conditions. The media is constructed for strong dirt-holding capacity so it continues filtering effectively as particles accumulate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for up to 12 months \/ 12,000 miles of protection in normal driving.\u003c\/li\u003e\n  \u003cli\u003eMedia traps and retains contaminants to keep them from entering the engine.\u003c\/li\u003e\n  \u003cli\u003eRegular replacement helps maintain consistent filtration performance over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter fit my Subaru model and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe CA9997 is manufactured as a precision-fit part for many Subaru engines, including various model years of Outback, Forester, Legacy, Impreza, WRX, WRX STI, Crosstrek\/XV, and Tribeca. Installation is straightforward: it replaces the existing element inside the airbox with no permanent modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit compatibility across multiple Subaru engines and model years.\u003c\/li\u003e\n  \u003cli\u003eNo special tools typically required — designed for quick, routine replacement.\u003c\/li\u003e\n  \u003cli\u003eProper sealing and fit help ensure effective filtration after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits will I notice after replacing a dirty filter?\u003c\/h3\u003e\n\u003cp\u003eSwapping a clogged air filter for a fresh FRAM Extra Guard can make the engine breathe more freely, which often results in crisper acceleration and steadier performance under load. While results vary by vehicle condition and driving habits, many owners notice improved responsiveness and a cleaner intake pathway.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePotentially improved acceleration and throttle response.\u003c\/li\u003e\n  \u003cli\u003eReduced strain on intake components by keeping out damaging debris.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain overall engine operation during everyday driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The FRAM CA9997 Extra Guard Air Filter is aimed at Subaru owners and independent technicians who want a dependable, affordable replacement that restores proper airflow and helps shield the engine from road dust. It’s ideal for drivers who perform regular maintenance themselves or those seeking an easy, cost-effective way to support long-term engine reliability across the Outback, Forester, Legacy, Impreza, WRX\/STI, Crosstrek, and Tribeca lineups.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67592493826233,"sku":"B001C6Q34S","price":62.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/image-1.jpg?v=1790564635"},{"product_id":"fram-ph2-extra-guard-spin-on-oil-filter-pack-of-2-96-efficiency-suregrip-removal","title":"Fram PH2 Extra Guard Spin-On Oil Filter Pack of 2 — 96% Efficiency, SureGRIP Removal","description":"\u003cp\u003e\u003cstrong\u003eFram PH2 Extra Guard passenger-car spin‑on oil filters (pack of 2) are disposable oil filters engineered to trap contaminants and help keep engine oil cleaner between changes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Fram PH2 Extra Guard is a commonly used, spin‑on replacement oil filter sized for many passenger cars. Inside each canister is filtration media designed to capture dirt and particles removed from circulating motor oil. Using a fresh, correctly rated filter helps maintain oil flow and reduces the amount of abrasive debris recirculated through engine bearings and surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Fram PH2 Extra Guard protect my engine?\u003c\/h3\u003e\n\u003cp\u003eThe Extra Guard filter uses high‑efficiency media to remove particles from the oil as it passes through the filter. That filtration lowers abrasive wear on engine components and helps keep oil cleaner until the next scheduled change.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePerforms at 96% Single Pass Efficiency to capture most particles in one circulation\u003c\/li\u003e\n  \u003cli\u003eMedia engineered to balance dirt-holding capacity with oil flow\u003c\/li\u003e\n  \u003cli\u003eSpin‑on canister design for a sealed, replaceable filter element\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this pack of two a practical choice?\u003c\/h3\u003e\n\u003cp\u003eBuying a two‑pack gives you a spare filter for your next oil change, saving a trip and ensuring you have the correct size on hand. A twin pack is also convenient if you maintain more than one compatible vehicle or like to keep an immediate replacement available.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo filters in one package for back‑to‑back oil changes or another vehicle\u003c\/li\u003e\n  \u003cli\u003eConsistent OEM‑style fitment for vehicles that list PH2 as the replacement\u003c\/li\u003e\n  \u003cli\u003eCost‑effective compared with single purchases\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and removal?\u003c\/h3\u003e\n\u003cp\u003eThe PH2 spin‑on design installs by threading onto the engine’s filter mount, and removal is the reverse process. Many models include a textured SureGRIP surface to make hand removal easier, and basic filters can be swapped with common hand tools and routine safety precautions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSureGRIP non‑slip feature on applicable units for better manual removal\u003c\/li\u003e\n  \u003cli\u003eStandard spin‑on thread pattern for straightforward replacement\u003c\/li\u003e\n  \u003cli\u003eLightweight, single‑piece canister that fits most passenger car service procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I choose the Extra Guard over other filters?\u003c\/h3\u003e\n\u003cp\u003eExtra Guard is positioned for drivers who want reliable particle removal at an economical price point. It’s suitable for regular oil change intervals and for drivers prioritizing proven filtration performance without choosing premium extended‑life filters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGood balance of filtration efficiency and value for routine service\u003c\/li\u003e\n  \u003cli\u003eAppropriate for standard oil change intervals recommended by your vehicle maker\u003c\/li\u003e\n  \u003cli\u003eRecognized as a widely used aftermarket option in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Fram PH2 Extra Guard (pack of 2) is aimed at passenger‑car owners, DIY mechanics, and service shops that need a dependable, widely compatible spin‑on filter for routine maintenance. Choose this two‑pack if you want a readily available replacement with high single‑pass efficiency, simple installation, and the convenience of an extra unit on hand. Always verify the PH2 fitment against your vehicle’s parts list before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the PH2 fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your vehicle’s owner manual or parts lookup for PH2 compatibility; the PH2 fits many passenger cars but verify thread and gasket size before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace this filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace at every oil change or per manufacturer interval; Extra Guard is designed for standard service schedules rather than extended‑life intervals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67592738963641,"sku":"B000NWNZ7A","price":57.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-extra-guard-front-view.jpg?v=1790567375"},{"product_id":"fram-engine-air-filter-ca10242-extra-guard-direct-fit-for-ford-lincoln-mazda-advanced-filtration-up-to-12-000-mi-service","title":"Fram engine air filter CA10242 Extra Guard direct-fit for Ford, Lincoln \u0026 Mazda — advanced filtration, up to 12,000‑mi service","description":"\u003cp\u003e\u003cstrong\u003eFRAM CA10242 Extra Guard is a direct-fit engine air filter engineered to trap airborne dirt and debris while supporting steady engine airflow for compatible Ford, Lincoln, Mazda and Mercury models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis FRAM Extra Guard air filter uses an advanced filtration media developed in FRAM engineering labs and tested against ISO 5011 protocols to deliver enhanced contaminant capture and reliable performance for everyday driving. Designed as a direct replacement for factory paper filters, the CA10242 fits a wide range of Ford, Lincoln, Mazda and Mercury vehicles and is intended for routine change intervals up to 12,000 miles depending on driving conditions and the vehicle manufacturer's recommendations.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the CA10242 improve daily driving and engine responsiveness?\u003c\/h3\u003e\n\u003cp\u003eThe CA10242 helps preserve clean intake airflow so the engine can breathe more consistently, which supports steady throttle response and overall drivability. It is engineered to maintain airflow while trapping common road contaminants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced media captures dust and particles while allowing proper airflow.\u003c\/li\u003e\n  \u003cli\u003eMaintains filtration efficiency over typical service intervals.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design reduces installation time and ensures correct sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles are compatible with this FRAM Extra Guard filter?\u003c\/h3\u003e\n\u003cp\u003eThis filter fits many Ford models (Edge, Explorer, Taurus, Flex, Fusion, Police Interceptor variants), several Lincoln SUVs and sedans, Mazda CX-9 and Mazda 6, plus the Mercury Sable. Always verify fit by cross-referencing part CA10242 with your vehicle's year, make, engine size and owner’s manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon Ford engines covered include 2.0L I4, 2.3L I4 and 3.5–3.7L V6 options.\u003c\/li\u003e\n  \u003cli\u003eCompatible Lincoln models include Aviator, MKT, MKX, MKZ and MKS in listed years.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Mazda 6 and CX-9 model years specified in the compatibility list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance interval should I follow for the FRAM CA10242?\u003c\/h3\u003e\n\u003cp\u003eFRAM Extra Guard air filters are often recommended for up to 12,000 miles between changes under normal driving conditions, though actual intervals depend on your driving environment and manufacturer guidance. Inspect the filter during routine service and replace sooner if you drive in dusty or severe conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFollow the vehicle manufacturer's change interval in the owner's manual.\u003c\/li\u003e\n  \u003cli\u003eCheck the filter visually at oil changes or service appointments.\u003c\/li\u003e\n  \u003cli\u003eReplace immediately if you notice heavy dirt, clogging, or restricted airflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose FRAM Extra Guard instead of a standard retail filter?\u003c\/h3\u003e\n\u003cp\u003eFRAM’s Extra Guard media was lab-tested and shown to provide improved particle capture compared with some standard retail-brand filters, making it a practical choice for drivers seeking balanced protection and value. The product is engineered to offer a combination of dirt-holding capacity and fitment reliability for everyday use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTested filtration media developed in FRAM engineering laboratories.\u003c\/li\u003e\n  \u003cli\u003eDesigned for dependable performance in routine driving conditions.\u003c\/li\u003e\n  \u003cli\u003ePrecision molding for an accurate seal in the airbox to prevent bypass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own compatible Ford, Lincoln, Mazda or Mercury vehicles and want an OEM-style replacement air filter that balances affordability with improved contaminant capture. The CA10242 is suitable for everyday commuters, fleet vehicles such as police interceptors, and anyone who prefers regular maintenance with a trusted aftermarket brand. Always check vehicle specifications and driving conditions to determine the best change interval for your situation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eFeatures:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eENGINE PERFORMANCE: Helps maintain clean airflow to support consistent power, efficiency, and reliable engine operation.\u003c\/li\u003e\n  \u003cli\u003eCONTAMINANT PROTECTION: Helps keep dirt, dust, and airborne debris from entering the engine.\u003c\/li\u003e\n  \u003cli\u003eDIRT-HOLDING CAPACITY: Advanced filter media captures and holds particles during normal use.\u003c\/li\u003e\n  \u003cli\u003ePRECISION FIT: Manufactured for an accurate fit within the engine air intake system.\u003c\/li\u003e\n  \u003cli\u003eCOMPATIBILITY: Fits a broad set of Ford, Lincoln, Mazda and Mercury models where CA10242 is specified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use FRAM CA10242 in dusty or off-road conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can, but expect shorter service intervals; inspect and replace the filter more often when driving in heavy dust or off-road environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is CA10242 a direct replacement for factory air filters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, CA10242 is a direct-fit aftermarket replacement designed to match factory dimensions and sealing for listed vehicle models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67592803647673,"sku":"B001C97ZVA","price":60.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca10242-front-packaging.jpg?v=1790568293"},{"product_id":"fram-extra-guard-engine-air-filter-ca9762-oem-fit-advanced-multi-layer-media-for-select-chrysler-dodge-lexus-toyota","title":"Fram Extra Guard Engine Air Filter CA9762 — OEM Fit, Advanced Multi-Layer Media (for select Chrysler\/Dodge\/Lexus\/Toyota)","description":"\u003cp\u003e\u003cstrong\u003eFRAM CA9762 Extra Guard is a high-efficiency engine air filter engineered to keep intake air cleaner and help preserve engine performance between recommended service intervals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe FRAM CA9762 Extra Guard air filter uses an advanced filter media developed and tested to capture and retain more dirt than many standard retail filters. Built for a precise OEM-style fit, this filter is designed for everyday driving and compatible with a range of vehicles including select Chrysler, Dodge, Lexus, and Toyota models. Use it to maintain consistent airflow, support engine responsiveness, and reduce the risk of harmful particles reaching internal components when you follow recommended change intervals.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter affect engine performance during daily driving?\u003c\/h3\u003e\n\u003cp\u003eBy maintaining cleaner intake air, the CA9762 helps the engine get the oxygen it needs for consistent throttle response and fuel combustion. Cleaner airflow supports steady power delivery and can reduce the conditions that lead to sluggish acceleration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced media captures fine dust and common road debris\u003c\/li\u003e\n  \u003cli\u003eDesigned to preserve smooth airflow for reliable performance\u003c\/li\u003e\n  \u003cli\u003eHelps maintain factory-like engine operation between services\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does the FRAM Extra Guard provide against contaminants?\u003c\/h3\u003e\n\u003cp\u003eThe CA9762 is engineered to trap and hold airborne particles so fewer contaminants reach the intake system. Its construction helps prevent dirt and dust from circulating where they could accelerate wear on internal components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-layer media increases contaminant-catching capability\u003c\/li\u003e\n  \u003cli\u003eHolds collected dirt to avoid re-entrainment into the intake\u003c\/li\u003e\n  \u003cli\u003eReduces the volume of abrasive particles entering the engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I change the CA9762 air filter and why?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends following your vehicle manufacturer’s interval, but Extra Guard filters are designed with typical change intervals in mind and are commonly replaced around 12,000 miles under normal driving. Timely replacement helps prevent reduced acceleration and supports ongoing efficiency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFollow the owner’s manual for the best schedule\u003c\/li\u003e\n  \u003cli\u003eReplace sooner if driving in dusty or harsh environments\u003c\/li\u003e\n  \u003cli\u003eRegular changes preserve airflow and engine responsiveness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter fit my vehicle and is installation straightforward?\u003c\/h3\u003e\n\u003cp\u003eThe CA9762 is manufactured to match the required dimensions of the specified OEM air box locations for easy installation. Its precision fit is intended to make swapping the old filter for a new one quick and simple without additional modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement fit for listed Chrysler, Dodge, Lexus, and Toyota models\u003c\/li\u003e\n  \u003cli\u003eStandard drop-in design requires no special tools in most cases\u003c\/li\u003e\n  \u003cli\u003eSeals and frame engineered for proper seating and airflow control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA9762 Extra Guard is aimed at vehicle owners who want a cost-effective, higher-performing replacement air filter that fits OEM intake housings. It suits drivers of compatible Chrysler Aspen, Dodge Durango, Lexus RX450h, LX600, Toyota Highlander, and similar models who perform routine maintenance themselves or prefer straightforward parts for shop service. Choose this filter if you want dependable contaminant protection, a precise fit, and support for steady engine performance during everyday driving.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the CA9762 a direct replacement for my vehicle's stock air filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the CA9762 is manufactured to fit the listed Chrysler, Dodge, Lexus, and Toyota models as a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I change the FRAM CA9762 Extra Guard filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow your owner's manual, but most drivers replace the filter around 12,000 miles under normal conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67593062318265,"sku":"B000A09MGI","price":60.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca9762-front-packaging.jpg?v=1790571477"},{"product_id":"fram-extra-guard-engine-air-filter-ca11858-for-nissan-rogue-rogue-sport-direct-fit-12-000-mile-protection","title":"Fram Extra Guard Engine Air Filter CA11858 for Nissan Rogue\/Rogue Sport — Direct-Fit, 12,000-Mile Protection","description":"\u003cp\u003e\u003cstrong\u003eThe FRAM CA11858 Extra Guard Engine Air Filter is a precision-fit replacement that helps keep road dust and debris out of your engine, preserving airflow and performance for up to 12,000 miles or two years.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as an affordable, factory-style intake filter, the FRAM Extra Guard combines engineered filter media with a sealed housing shape to deliver consistent airflow while trapping contaminants before they reach sensitive engine parts. It’s built to match OE dimensions for a straightforward swap in compatible Nissan models and related vehicles, offering a quick maintenance upgrade that supports everyday driving reliability.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter affect engine performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a clogged or worn air filter with the FRAM CA11858 restores proper intake flow and reduces restrictions that can limit throttle response. Cleaner air into the combustion chamber helps the engine run more efficiently under normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngine airflow optimized for steady power delivery\u003c\/li\u003e\n  \u003cli\u003eHelps maintain throttle responsiveness during acceleration\u003c\/li\u003e\n  \u003cli\u003eWorks with stock intake systems—no modification needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat level of contaminant protection does it provide?\u003c\/h3\u003e\n\u003cp\u003eThe Extra Guard media is engineered to capture and retain a high percentage of dust and airborne particles compared with many everyday retail options. Its dirt-holding capability helps prevent abrasive material from circulating through intake passages and components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced filter media traps fine dust and debris\u003c\/li\u003e\n  \u003cli\u003eHolds contaminants to preserve filtration efficiency over time\u003c\/li\u003e\n  \u003cli\u003eSealed fit reduces bypass and ensures trapped particles stay out of the engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my vehicle and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eThe CA11858 is manufactured to match the original air box geometry for direct replacement in specified Nissan models, so installation is typically fast and tool-light. The precise fit helps ensure effective filtration and an easy routine service item for DIYers or professional technicians.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit for many Nissan Rogue, Rogue Sport, Qashqai\/X-Trail model years\u003c\/li\u003e\n  \u003cli\u003eInstallation usually involves opening the airbox and swapping filters—no trimming required\u003c\/li\u003e\n  \u003cli\u003eDesigned for correct sealing to prevent unfiltered air entry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will this air filter last and when should I replace it?\u003c\/h3\u003e\n\u003cp\u003eFRAM rates the Extra Guard for protection up to about 12,000 miles or two years under typical driving conditions; local environment and driving habits will influence actual service intervals. Inspect the element during regular maintenance and replace sooner if you drive frequently on dusty roads or in severe conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for up to 12,000 miles \/ 2 years under normal use\u003c\/li\u003e\n  \u003cli\u003eCheck earlier in dusty, off-road or heavy-traffic environments\u003c\/li\u003e\n  \u003cli\u003eReplacing a dirty filter helps maintain airflow and reduce engine wear risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The FRAM CA11858 Extra Guard is aimed at owners of compatible Nissan vehicles (including Rogue, Rogue Sport, Qashqai\/X‑Trail) who want an economical, OE‑style replacement that balances airflow and particulate protection for everyday driving. It’s a good fit for DIY maintainers and service shops seeking a reliable, quick-install air filter to help sustain engine performance between scheduled services.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the FRAM CA11858 a direct replacement for my Nissan Rogue?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this filter is made to fit specified Rogue, Rogue Sport, Qashqai\/X‑Trail model years for a direct swap without modifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the FRAM Extra Guard CA11858?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace approximately every 12,000 miles or two years under normal driving; inspect sooner in dusty or severe conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67593078866105,"sku":"B01HU1MU68","price":61.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca11858-front-view.jpg?v=1790571658"},{"product_id":"fram-extra-guard-engine-air-filter-ca10169-replacement-for-toyota-lexus-scion-multi-layer-filtration-up-to-12-000-miles","title":"Fram Extra Guard Engine Air Filter CA10169 — Replacement for Toyota\/Lexus\/Scion, Multi‑Layer Filtration, Up to 12,000 Miles","description":"\u003cp\u003e\u003cstrong\u003eThe FRAM CA10169 Extra Guard Engine Air Filter is a drop-in replacement air filter that helps keep dirt and road debris out of your engine for up to 12,000 miles or two years.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a straightforward maintenance part, the FRAM CA10169 uses a denser, multi-layer filter media to trap more particulate matter than many basic retail options. It fits a variety of Toyota, Lexus, Scion, Pontiac and select sports cars, and it’s built to be installed quickly during routine service intervals. Replacing a clogged air filter with this FRAM Extra Guard model can help restore airflow, reduce strain on the intake system, and support consistent engine operation under everyday driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the FRAM CA10169 protect my engine during daily driving?\u003c\/h3\u003e\n\u003cp\u003eThe Extra Guard media captures airborne particles before they reach the combustion chamber, reducing the amount of abrasive dust circulating through engine components. It’s engineered for a balance of filtration efficiency and airflow so the engine receives cleaner intake air without unnecessary restriction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced multi-layer media traps finer dust and debris.\u003c\/li\u003e\n  \u003cli\u003eHigher dirt-holding capacity delays performance-robbing clogging.\u003c\/li\u003e\n  \u003cli\u003ePrecision molding ensures a tight seal within the intake housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter fit my vehicle and is it easy to install?\u003c\/h3\u003e\n\u003cp\u003eThe CA10169 is manufactured to match original equipment dimensions for a precise fit in compatible models. Installation is typically a quick, tool-light process: remove the airbox cover, pull out the old element, drop in the FRAM filter, and reseal the housing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement size for listed Toyota, Lexus, Scion, Pontiac, and select models.\u003c\/li\u003e\n  \u003cli\u003eFormed gasket and frame help ensure correct seating and minimal air bypass.\u003c\/li\u003e\n  \u003cli\u003eSimple swap process suitable for most DIY owners and technicians.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the FRAM Extra Guard CA10169?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends replacing Extra Guard filters up to 12,000 miles or two years under normal driving conditions. Check your vehicle’s owner manual and inspect the filter more frequently if you drive in dusty, off-road, or heavy-traffic environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard change interval: up to 12,000 miles or 2 years.\u003c\/li\u003e\n  \u003cli\u003eShorten interval in dusty or high-pollution areas for optimal protection.\u003c\/li\u003e\n  \u003cli\u003eVisual inspection can reveal excessive dirt or damage requiring earlier replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance effects should I expect after installing this air filter?\u003c\/h3\u003e\n\u003cp\u003eAfter installing a clean FRAM CA10169, airflow can return to nearer-original levels, which supports smoother throttle response and steadier engine operation. While results vary by vehicle and condition, many owners notice restored peak performance lost to a clogged filter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved airflow helps maintain consistent power delivery.\u003c\/li\u003e\n  \u003cli\u003eCleaner intake air reduces the risk of abrasive wear on internal parts.\u003c\/li\u003e\n  \u003cli\u003eEngine responsiveness and idle stability often improve after replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA10169 Extra Guard Engine Air Filter is aimed at vehicle owners who want a reliable, affordable OEM-style replacement for routine maintenance. It’s well suited for owners of compatible Toyota, Lexus, Scion, Pontiac and select sport models who prefer a simple, effective filter that balances filtration efficiency and airflow for everyday driving and occasional demanding conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What vehicles use the FRAM CA10169?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This CA10169 fits several Toyota models (RAV4, Camry, Corolla, Avalon, Venza, Matrix), Lexus ES350, Scion xB\/tC, Pontiac Vibe, and select Lotus models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does the FRAM Extra Guard CA10169 last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Under normal driving, change intervals are up to 12,000 miles or two years; inspect sooner in dusty or severe conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67593148367033,"sku":"B0010DXYJU","price":60.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca10169-front-packaging.jpg?v=1790572371"},{"product_id":"fram-extra-guard-engine-air-filter-ca8918-up-to-12-000-mile-protection-advanced-filtration","title":"Fram Extra Guard Engine Air Filter CA8918 — Up to 12,000-Mile Protection, Advanced Filtration","description":"\u003cp\u003e\u003cstrong\u003eFRAM CA8918 Extra Guard is a replacement engine air filter designed to trap airborne dirt and help preserve engine performance for up to 12,000 miles with advanced filtration media.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe FRAM CA8918 Extra Guard Engine Air Filter combines engineered filter media and a precision fit to protect your engine from dust and debris while supporting consistent airflow. FRAM lab testing under ISO 5011 shows this Extra Guard design provides roughly twice the particle-capturing efficiency versus a typical standard retail filter, and the recommended change interval helps maintain acceleration and horsepower during everyday driving.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter affect engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe CA8918 helps maintain steady airflow into the intake, which supports reliable combustion and smoother throttle response. By catching contaminants before they reach internal components, it reduces the likelihood of clogged passages that can lower power and fuel efficiency over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced media captures and holds dirt to preserve airflow.\u003c\/li\u003e\n  \u003cli\u003eDesigned for everyday driving conditions and routine maintenance intervals.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent decreased acceleration and loss of horsepower between changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat level of protection can I expect from FRAM Extra Guard?\u003c\/h3\u003e\n\u003cp\u003eFRAM Extra Guard air filters are engineered and lab-tested to deliver higher filtration efficiency compared with many standard retail alternatives. Under controlled ISO 5011 testing, comparable Extra Guard models showed approximately 2X the protection, meaning fewer particles pass through the filter to the engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTested media efficiency gives greater particle retention versus standard filters.\u003c\/li\u003e\n  \u003cli\u003eCaptures dust, dirt, and airborne debris common in daily driving environments.\u003c\/li\u003e\n  \u003cli\u003eDesigned to retain contaminants as they accumulate to maintain effectiveness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the CA8918 Extra Guard?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends following your vehicle manufacturer’s owner’s manual for exact service intervals, and the CA8918 is designed for change intervals up to 12,000 miles under normal driving conditions. Regular inspection is advised if you drive in dusty or severe conditions, where replacement may be needed sooner.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for up to 12,000 miles between changes under typical use.\u003c\/li\u003e\n  \u003cli\u003eCheck sooner if you frequently drive on gravel roads or in dusty environments.\u003c\/li\u003e\n  \u003cli\u003eQuick, precision fit makes removal and installation straightforward during routine service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe CA8918 is manufactured for specific engine air intake housings; confirm fitment with your vehicle’s parts guide or compatibility lookup. It is commonly used on certain light trucks and SUVs and has cross-compatibility notes with several Toyota and Lexus models in FRAM documentation, but always verify against your VIN or parts chart.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-molded to match specified intake dimensions for a secure seal.\u003c\/li\u003e\n  \u003cli\u003eCompatibility checks recommended using vehicle make, model, and year.\u003c\/li\u003e\n  \u003cli\u003eListed applications include some Toyota and Lexus models in FRAM materials; always confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA8918 Extra Guard is aimed at vehicle owners who want a cost-effective OEM-style replacement air filter that balances filtration efficiency and maintenance convenience. It’s a practical choice for daily drivers, small fleet operators, and DIY enthusiasts who prefer predictable 12,000-mile service intervals, straightforward installation, and improved protection compared with typical standard retail air filters. If you frequently drive in heavy dust or tow under severe conditions, monitor the filter more often and replace it as needed to maintain peak engine airflow and protection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the FRAM CA8918 reusable or disposable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The CA8918 Extra Guard is a disposable replacement filter designed for single-use until the next scheduled change.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the CA8918 in off-road or dusty conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, but if you drive in very dusty or severe conditions you should inspect and replace the filter more frequently than the standard interval.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67593239789753,"sku":"B0009H51ZS","price":60.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca8918-front-packaging.jpg?v=1790573517"},{"product_id":"fram-extra-guard-engine-air-filter-ca10881-for-hyundai-kia-12-000-mile-life-advanced-filtration","title":"Fram Extra Guard Engine Air Filter CA10881 for Hyundai \u0026 Kia — 12,000‑Mile Life, Advanced Filtration","description":"\u003cp\u003e\u003cstrong\u003eFRAM CA10881 Extra Guard Engine Air Filter is a replacement air filter engineered to trap airborne contaminants and help maintain engine performance for up to 12,000 miles between changes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FRAM Extra Guard CA10881 uses advanced filter media developed and tested in FRAM laboratories to provide stronger filtration than average retail-standard air filters. It’s built to fit specific Hyundai and Kia models, offering a straightforward installation and consistent airflow to support everyday driving needs. The CA10881 emphasizes contaminant capture, dirt-holding capacity, and a precision fit to help sustain engine responsiveness and efficiency over normal service intervals.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the CA10881 help maintain engine performance?\u003c\/h3\u003e\n\u003cp\u003eThis air filter supports steady intake airflow while capturing particulates that can reduce engine efficiency. By keeping the intake air cleaner, the filter helps the engine breathe properly, which can preserve throttle response and fuel efficiency under routine driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced media designed to trap dust and debris.\u003c\/li\u003e\n  \u003cli\u003eMaintains airflow for consistent engine power delivery.\u003c\/li\u003e\n  \u003cli\u003eHelps avoid decreased acceleration linked to clogged filters.\u003c\/li\u003e\n  \u003cli\u003eRecommended 12,000-mile change interval for routine care.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat contaminants does this FRAM filter block and how well?\u003c\/h3\u003e\n\u003cp\u003eFRAM Extra Guard media captures common airborne particles—dirt, dust, and road debris—before they enter the intake system. FRAM testing shows improved particle capture versus an average standard retail brand, helping protect internal components from abrasive contaminants during everyday use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered filtration media with enhanced dirt-holding capacity.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce particle ingress that could wear engine parts.\u003c\/li\u003e\n  \u003cli\u003eDesigned to retain contaminants as they accumulate without sacrificing airflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the CA10881 easy to install and will it fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe CA10881 is manufactured to precise dimensions for an accurate fit into compatible airbox housings, making installation quick and tool-friendly for most drivers. Always check compatibility with your vehicle’s year, make, and engine size before ordering to ensure a proper seal and performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-fit design for correct placement in the air intake system.\u003c\/li\u003e\n  \u003cli\u003eCompatible with select Hyundai and Kia models and engine options.\u003c\/li\u003e\n  \u003cli\u003eSimple replacement process when following the vehicle owner’s manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace this air filter and what maintenance helps it last?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends replacing the Extra Guard CA10881 around every 12,000 miles under typical driving conditions, or sooner if you frequently drive in dusty or harsh environments. Regular visual checks during routine service can help you spot heavy soiling and decide on earlier replacement to preserve engine performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard recommended change interval: 12,000 miles.\u003c\/li\u003e\n  \u003cli\u003eInspect more often for off-road, dusty, or polluted driving.\u003c\/li\u003e\n  \u003cli\u003eReplace following vehicle manufacturer guidance for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA10881 Extra Guard Engine Air Filter is for owners of compatible Hyundai and Kia vehicles (including Sonata, Santa Fe, Azera, Optima, Sorento) who want an easy-to-install, lab-tested replacement filter that emphasizes contaminant capture and reliable airflow between routine service intervals. It’s a practical choice for everyday drivers seeking improved particle protection over a standard retail filter while following manufacturer maintenance schedules.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps maintain clean airflow to support consistent power and engine efficiency on everyday drives.\u003c\/li\u003e\n  \u003cli\u003eEngineered to keep dirt, dust, and airborne debris from entering the engine during routine operation.\u003c\/li\u003e\n  \u003cli\u003eAdvanced media captures and holds contaminants to preserve effective filtration over service life.\u003c\/li\u003e\n  \u003cli\u003ePrecision-manufactured for accurate fit and straightforward installation in compatible vehicles.\u003c\/li\u003e\n  \u003cli\u003eCompatible with selected Hyundai and Kia models including Sonata, Santa Fe, Azera, Optima, Sorento, and Cadenza.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which vehicles does the FRAM CA10881 fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits select Hyundai and Kia models including Sonata, Santa Fe, Azera, Optima, Sorento and Cadenza for the listed years and engine sizes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I change the CA10881 filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: FRAM recommends replacing it about every 12,000 miles under normal driving; inspect sooner for dusty or harsh conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67593513697465,"sku":"B007RW3KJM","price":60.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca10881-front-view.jpg?v=1790576363"},{"product_id":"fram-extra-guard-engine-air-filter-for-2006-2011-honda-civic-1-8l-ca10165-12-000-mile-pleated-media","title":"Fram Extra Guard Engine Air Filter for 2006–2011 Honda Civic 1.8L — CA10165, 12,000‑mile pleated media","description":"\u003cp\u003e\u003cstrong\u003eFRAM CA10165 Extra Guard is a direct-fit engine air filter built to trap airborne debris and help maintain consistent engine airflow for 12,000-mile service intervals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a practical replacement for 2006–2011 Honda Civic 1.8L engines, the FRAM CA10165 uses a proprietary pleated media engineered for extended dirt-holding and reliable airflow. It’s created to install easily, fit precisely in the factory airbox, and function across everyday driving conditions—urban commutes, highway trips, and light dusty environments. This product description explains what the filter does, how it performs, and whether it’s the right choice for your Civic.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the FRAM CA10165 help keep my Civic running smoothly?\u003c\/h3\u003e\n\u003cp\u003eThe CA10165 reduces the amount of dust, grit, and other particulates reaching the intake, helping the engine breathe more consistently. Cleaner intake air supports steady throttle response and reduces the risk of contaminant buildup on internal parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced pleated media captures and retains common road contaminants.\u003c\/li\u003e\n  \u003cli\u003eMaintains consistent airflow to support normal acceleration and efficiency.\u003c\/li\u003e\n  \u003cli\u003eReduces particle transfer to intake components during routine driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the recommended maintenance intervals and fitment details?\u003c\/h3\u003e\n\u003cp\u003eFRAM designs this Extra Guard filter to be changed at roughly 12,000-mile intervals under typical driving conditions; follow your vehicle manufacturer’s schedule for best results. The CA10165 is manufactured to match the Honda Civic 1.8L factory airbox dimensions for a straightforward, correct installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApproximate change interval: 12,000 miles for everyday driving scenarios.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit for 2006–2011 Honda Civic 1.8L models—no trimming required.\u003c\/li\u003e\n  \u003cli\u003eSimple removal and replacement using basic hand tools or by hand in most cases.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this filter compare to standard retail-brand alternatives?\u003c\/h3\u003e\n\u003cp\u003eFRAM’s Extra Guard air filters use engineered media and a pleat pattern intended to increase dirt-holding capacity versus many ordinary retail-grade filters. Lab testing indicates greater particle retention under controlled conditions, helping the filter maintain filtration performance as it accumulates debris.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered media and pleat design improve contaminant capture and holding capacity.\u003c\/li\u003e\n  \u003cli\u003eTested for efficiency against comparable retail-class filters using industry protocols.\u003c\/li\u003e\n  \u003cli\u003eManufactured for consistent dimensions and sealing at the airbox interface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter affect fuel economy or engine performance?\u003c\/h3\u003e\n\u003cp\u003eWhen the intake is kept free of excessive debris and the filter is replaced on schedule, the engine can maintain designed airflow characteristics, which supports consistent performance and fuel-use patterns. Any gains are situational—regular replacement avoids airflow restriction that can contribute to reduced responsiveness or efficiency over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps prevent progressive airflow restriction from collected dirt.\u003c\/li\u003e\n  \u003cli\u003eSupports steady throttle response during normal driving conditions.\u003c\/li\u003e\n  \u003cli\u003eMaintaining scheduled changes helps the engine perform as intended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM CA10165 Extra Guard is aimed at Honda Civic 1.8L owners (model years 2006–2011) who want a cost-effective, direct-replacement air filter that balances reliable contaminant capture with easy installation and routine maintenance. It suits daily drivers, commuters, and those who prefer a recognized aftermarket brand offering tested filtration media and factory-compatible fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the FRAM CA10165 compatible with my 2008 Honda Civic 1.8L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CA10165 is a direct-fit replacement for 2006–2011 Honda Civic 1.8L models and installs into the factory airbox without modification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace this air filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For typical driving, FRAM recommends replacing the Extra Guard at about 12,000-mile intervals or follow your vehicle owner’s manual guidance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67593592471737,"sku":"B0019O1BS6","price":60.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca10165-front-view.jpg?v=1790576967"},{"product_id":"fram-fresh-breeze-cabin-air-filter-cf10709-arm-hammer-baking-soda-odor-control-pleated-particle-filtration-for-compact-mids","title":"Fram Fresh Breeze Cabin Air Filter CF10709 — Arm \u0026 Hammer baking soda odor control, pleated particle filtration for compact \u0026 mids","description":"\u003cp\u003e\u003cstrong\u003eFRAM CF10709 Fresh Breeze Cabin Air Filter uses Arm \u0026amp; Hammer baking soda embedded in the media to reduce odors while capturing common airborne particles entering your vehicle.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eInstalling a quality cabin air filter is one of the quickest ways to improve in-car air comfort. The FRAM Fresh Breeze CF10709 combines a fine pleated filtration media with natural odor-neutralizing baking soda (Arm \u0026amp; Hammer) to help limit smells and trap pollen, dust, and road debris as outside air moves through your HVAC system. It’s designed for many compact and midsize models and aims to make everyday drives feel fresher.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter reduce odors during normal driving?\u003c\/h3\u003e\n\u003cp\u003eThe CF10709 integrates Arm \u0026amp; Hammer baking soda into the filter media, which helps neutralize certain odors that travel through the ventilation system. It doesn’t add fragrances; instead it works by reducing odor molecules so the cabin air smells cleaner. This is a passive, ongoing effect as air flows through the filter.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmbedded baking soda for natural odor control\u003c\/li\u003e\n\u003cli\u003eNo masking scent—neutralization instead of perfume\u003c\/li\u003e\n\u003cli\u003eActs continuously while the HVAC system circulates air\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of particles and pollutants will it capture?\u003c\/h3\u003e\n\u003cp\u003eFRAM’s Fresh Breeze cabin filter is built to trap common airborne contaminants that enter via the heating and air conditioning intake. The pleated media captures dust, pollen, road debris and other larger particles, helping reduce what reaches the passenger compartment. The filter is rated to capture a high percentage of these particles during standard driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFilters pollen, dust, and road grit\u003c\/li\u003e\n\u003cli\u003eHelps reduce particulate concentration in the cabin\u003c\/li\u003e\n\u003cli\u003eDesigned for everyday commuting, errands, and trips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the FRAM CF10709 and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eReplacement frequency depends on driving conditions; typical guidance is to check or change the cabin filter every 12,000–15,000 miles or sooner in dusty or smoky environments. Installation is vehicle-specific but many cars allow access from behind the glove box or under the hood and it’s a straightforward, tool-light task for most DIYers. Always consult your owner’s manual for exact location and fit instructions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect more often in heavy-pollen or wildfire areas\u003c\/li\u003e\n\u003cli\u003eCommon replacement interval: ~12,000–15,000 miles\u003c\/li\u003e\n\u003cli\u003eSimple swap for most compatible models—owner manual recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles are compatible with this cabin air filter?\u003c\/h3\u003e\n\u003cp\u003eThe CF10709 fits a range of compact and midsize models from several manufacturers. It’s listed as compatible with many Hyundai and Kia cars, and select Dodge and JAC models. Check fitment against your vehicle year and model before purchase to ensure correct sizing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCommon fits: Hyundai Accent, Tucson, Veloster, Genesis Coupe, HB20S\u003c\/li\u003e\n\u003cli\u003eKia fits include Rio, Sportage, Forte, and related variants\u003c\/li\u003e\n\u003cli\u003eAlso listed for certain Dodge Attitude and JAC J4 vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a simple, low-maintenance upgrade to cabin comfort will appreciate the FRAM Fresh Breeze CF10709. It’s aimed at people seeking reliable particle filtration plus natural odor neutralization without added scents. If your daily routes include high pollen, city dust, or intermittent smoke exposure and you want a fresher-feeling interior, this filter is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the CF10709 add fragrance to the car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It uses Arm \u0026amp; Hammer baking soda to neutralize odors rather than adding scent.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this filter myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Many vehicles allow an easy swap behind the glove box or under the hood; consult your owner’s manual.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67593635496121,"sku":"B004IZWMD6","price":59.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-cf10709-front-packaging.jpg?v=1790577312"},{"product_id":"fram-extra-guard-engine-air-filter-ca9482-replacement-for-toyota-subaru-multi-layer-media-up-to-12-000-mi","title":"Fram Extra Guard Engine Air Filter CA9482 — Replacement for Toyota\/Subaru (Multi-Layer Media, up to 12,000 mi)","description":"\u003cp\u003e\u003cstrong\u003eThe FRAM CA9482 Extra Guard Engine Air Filter is a replacement air filter built to trap dirt and debris while preserving engine airflow for everyday driving.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe CA9482 is part of FRAM's Extra Guard line, engineered with a multi-layer filter media to capture contaminants without overly restricting intake airflow. It is designed for routine maintenance intervals up to 12,000 miles (follow your vehicle manual) and fits a range of compact cars and sport coupes from Toyota, Subaru, Scion and Pontiac. FRAM lab testing shows the Extra Guard media provides improved particle capture compared with many standard retail-brand equivalents, while keeping replacement and installation straightforward for DIYers and technicians.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the CA9482 help keep my engine running smoothly?\u003c\/h3\u003e\n\u003cp\u003eThis air filter protects the intake system by trapping dust, pollen and road debris before they can enter the engine. Cleaner intake air helps maintain combustion efficiency and reduces the chance of abrasive wear on internal parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced multi-layer media designed for effective contaminant capture\u003c\/li\u003e\n  \u003cli\u003eDirt-holding capacity helps preserve filtration performance between changes\u003c\/li\u003e\n  \u003cli\u003eHelps reduce particle entry that can affect throttle response and engine components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the CA9482 affect my vehicle's performance or fuel economy?\u003c\/h3\u003e\n\u003cp\u003eThe filter is engineered to balance filtration and airflow, so it helps maintain the engine's designed power and efficiency during normal driving. It isn't a performance upgrade filter for racing, but it supports consistent acceleration and reliable operation by preventing airflow restriction as it collects debris.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to maintain proper airflow for everyday driving conditions\u003c\/li\u003e\n  \u003cli\u003eHelps prevent decreased acceleration associated with clogged filters\u003c\/li\u003e\n  \u003cli\u003eRecommended replacement intervals help sustain economy and power\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the CA9482 easy to install, and which models does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe CA9482 is manufactured for a precise fit into the vehicle's airbox, making installation straightforward with basic tools or for most DIY owners. Always verify fitment with your vehicle's model year and engine type before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Toyota Corolla, Toyota Matrix (1.8L models 2003–2008)\u003c\/li\u003e\n  \u003cli\u003eFits Honda-sourced models like Pontiac Vibe (1.8L 2003–2008) and Scion tC (2.4L 2005–2010)\u003c\/li\u003e\n  \u003cli\u003eAlso fits sport coupes: Subaru BRZ, Scion FR-S, Toyota 86 (2.0L engines 2013–2020\/2017–2020)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the CA9482, and what maintenance tips help it last?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends routine change intervals consistent with your owner's manual; the Extra Guard family is tested for durability up to about 12,000 miles between changes under typical driving conditions. Inspect the filter sooner in dusty or off-road environments and replace when heavy buildup reduces airflow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard suggested interval: up to 12,000 miles—follow your vehicle manual\u003c\/li\u003e\n  \u003cli\u003eCheck filter visually during oil changes or at recommended service intervals\u003c\/li\u003e\n  \u003cli\u003eReplace sooner in dusty climates, unpaved roads, or heavy stop-and-go traffic\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The FRAM CA9482 Extra Guard is aimed at drivers who want an affordable, OEM-style replacement filter engineered for dependable everyday use. It suits owners of compatible Toyota, Subaru, Scion and Pontiac vehicles who prefer straightforward parts that preserve factory performance and simplify routine maintenance. If you follow your vehicle's service schedule and want a proven, widely compatible air filter that balances filtration efficiency and airflow, the CA9482 is a practical choice.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote:\u003c\/em\u003e Always confirm fitment for your specific vehicle year and engine using the vehicle owner’s manual or parts lookup before installation. This description is informational and not a substitute for manufacturer recommendations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the FRAM CA9482?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow your vehicle owner's manual, but FRAM Extra Guard is typically used up to 12,000 miles under normal driving; inspect sooner in dusty conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the CA9482 fit my Toyota Corolla or Subaru BRZ?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this part fits certain Toyota Corolla\/Matrix 1.8L models (2003–2008) and Subaru BRZ\/Scion FR-S\/Toyota 86 2.0L models (2013–2020). Verify year and engine for exact fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67593704439993,"sku":"B000A0CANA","price":59.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca9482-front-packaging.jpg?v=1790577787"},{"product_id":"fram-extra-guard-engine-air-filter-ca11450-for-select-nissan-altima-12-000-mile-protection-precision-fit","title":"Fram Extra Guard Engine Air Filter CA11450 for select Nissan Altima — 12,000-mile protection, precision fit","description":"\u003cp\u003e\u003cstrong\u003eThe FRAM CA11450 Extra Guard Engine Air Filter is a replacement air filter engineered to trap road dust and airborne particles, helping maintain clean airflow to your engine for up to 12,000 miles or 2 years under normal driving.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeeping intake air clean is one of the simplest maintenance steps that supports steady engine performance. The FRAM Extra Guard line uses advanced filter media that captures more contaminant by volume versus many standard retail options. This CA11450 model is manufactured to a precision fit for compatible vehicles such as select Nissan Altima applications, making swap-outs straightforward and dependable.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter support everyday engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe FRAM CA11450 helps preserve consistent air delivery to the engine by limiting the amount of dust and debris that reaches intake components. Cleaner intake air supports steady combustion conditions, which can contribute to smoother throttle response and reliable operation across city and highway driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced media captures and holds dirt to maintain airflow balance.\u003c\/li\u003e\n  \u003cli\u003eDesigned for routine driving demands and repeated start-stop conditions.\u003c\/li\u003e\n  \u003cli\u003eHelps protect engine components from abrasive particles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this Extra Guard filter different from a basic aftermarket filter?\u003c\/h3\u003e\n\u003cp\u003eExtra Guard filters are built with a layered media structure that increases dirt-holding capacity and filtration efficiency compared with many basic filters. That structure aims to let less particulate pass through while still allowing adequate airflow for normal engine needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-layer media traps a wider range of particle sizes.\u003c\/li\u003e\n  \u003cli\u003eEngineered to capture more dirt by volume than common standard-brand filters.\u003c\/li\u003e\n  \u003cli\u003eBalanced construction to protect intake without overly restricting airflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what fitment should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be simple: the CA11450 is manufactured to precise dimensions so it seats correctly in the airbox for a secure seal. Most owners can replace the filter with basic hand tools and minimal mechanical experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-fit design helps ensure a proper seal in the intake housing.\u003c\/li\u003e\n  \u003cli\u003eQuick swap process—open airbox, remove old filter, insert new filter, close airbox.\u003c\/li\u003e\n  \u003cli\u003eCompatible with specified Nissan Altima applications; verify fit for your model year.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I change the FRAM CA11450 filter and what does it protect against?\u003c\/h3\u003e\n\u003cp\u003eFRAM recommends replacement intervals up to 12,000 miles or 2 years under normal driving conditions; harsher environments with excessive dust may require more frequent changes. The filter helps guard the intake system against dirt, road dust, pollen and other airborne debris that can shorten component life or affect airflow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuggested interval: up to 12,000 miles or 2 years under typical conditions.\u003c\/li\u003e\n  \u003cli\u003eShorten intervals if you drive in dusty, sandy, or heavy-pollen areas.\u003c\/li\u003e\n  \u003cli\u003eRegular replacement helps maintain designed engine airflow and protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this filter for? The FRAM CA11450 Extra Guard is a practical choice for Nissan Altima owners and other drivers seeking an affordable, higher-capacity replacement air filter that balances filtration and airflow. It's aimed at people who perform routine vehicle maintenance themselves, DIY enthusiasts, and service shops that want a dependable aftermarket option to protect engines during everyday driving. Always check your vehicle's owner manual or parts guide to confirm compatibility before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the FRAM CA11450 compatible with my Nissan Altima?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The CA11450 fits many Nissan Altima applications, but confirm compatibility by checking your vehicle year and OEM part number before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the CA11450 Extra Guard filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace up to every 12,000 miles or 2 years under normal driving; replace more often in very dusty conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67593712763065,"sku":"B00GBRG4TC","price":60.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ca11450-front-view.jpg?v=1790577848"},{"product_id":"fram-extra-guard-ph6065b-motorcycle-atv-oil-filter-suregrip-textured-housing-silicone-anti-drain-valve","title":"Fram Extra Guard PH6065B Motorcycle\/ATV Oil Filter - SureGrip Textured Housing, Silicone Anti-Drain Valve","description":"\u003cp\u003e\u003cstrong\u003eFRAM PH6065B Extra Guard Oil Filter is a replacement motorcycle\/ATV oil filter built to trap contaminants and support dependable engine performance during routine oil changes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe FRAM Extra Guard PH6065B combines a blended cellulose-and-glass media with a silicone anti-drain back valve and SureGrip textured housing to deliver consistent filtration for everyday riders who maintain OE-recommended service intervals. Designed to balance particle capture and holding capacity, this filter helps keep oil cleaner between changes while making installation and removal straightforward.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the PH6065B protect my engine on regular rides?\u003c\/h3\u003e\n\u003cp\u003eThis filter captures damaging particles that circulate in engine oil so moving parts face less abrasive wear. The media blend targets a high percentage of common contaminants while maintaining flow for proper lubrication.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced fiber\/resin filter media traps up to 95% of harmful dirt.\u003c\/li\u003e\n  \u003cli\u003eBalanced dirt-holding capacity to limit clogging over the service interval.\u003c\/li\u003e\n  \u003cli\u003eMaintains oil flow to support steady lubrication during normal operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the design make oil changes easier for do-it-yourself riders?\u003c\/h3\u003e\n\u003cp\u003eYes — the PH6065B includes a textured SureGrip surface to simplify twisting the filter on and off, and the silicone anti-drain back valve helps prevent dry starts after service. These features reduce mess and speed up routine maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-slip textured housing for faster, more secure installation and removal.\u003c\/li\u003e\n  \u003cli\u003eSilicone anti-drain back valve preserves oil in the filter after shutdown.\u003c\/li\u003e\n  \u003cli\u003eStandard dimensions fit recommended OEM applications for direct replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect over the service interval?\u003c\/h3\u003e\n\u003cp\u003eEngineered for everyday use, this Extra Guard model aims to provide dependable filtration for typical manufacturer-recommended change intervals. It balances fine particle capture with capacity so filtration remains effective without overly restricting flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimized filtration to maintain contaminant capture throughout the interval.\u003c\/li\u003e\n  \u003cli\u003eDesigned for routine OE interval mileage when used as recommended.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce abrasive debris to support component longevity during normal riding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich bikes and ATVs is the PH6065B compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe PH6065B is specified for a range of Harley-Davidson models and other applications with matching oil filter threads and dimensions. Always verify fitment with your owner’s manual or parts diagram before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovers popular Harley-Davidson models including Street Glide, Road King, Fat Boy, and Sportster 1200 Custom.\u003c\/li\u003e\n  \u003cli\u003eWorks as a direct replacement where PH6065B specifications match OEM requirements.\u003c\/li\u003e\n  \u003cli\u003eCheck exact model year and engine fitment to confirm compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM PH6065B Extra Guard Oil Filter is aimed at everyday motorcycle and ATV owners who perform routine oil changes at manufacturer intervals and want an affordable, easy-to-handle replacement that balances dirt-trapping efficiency with dirt-holding capacity. It’s a good choice for DIY mechanics and riders of compatible Harley-Davidson models seeking straightforward filtration without specialty long-life claims.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I change the FRAM PH6065B?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow your vehicle manufacturer’s recommended oil-change interval; PH6065B is designed for typical OE service intervals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this filter fit my Harley-Davidson Street Glide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, PH6065B lists compatibility with many Street Glide models, but verify year and engine fitment before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67593933979833,"sku":"B0009IQZY8","price":54.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ph6065b-front-view.jpg?v=1790580869"},{"product_id":"fram-synthetic-oil-filter-xg6607p-with-suregrip-high-capacity-up-to-20-000-mile-protection","title":"Fram synthetic oil filter XG6607P with SureGrip — high-capacity, up to 20,000-mile protection","description":"\u003cstrong\u003eThe FRAM XG6607P Synthetic Oil Filter is a high-capacity replacement filter designed for synthetic oil changes and engineered to provide protection for up to 20,000 miles when used as directed.\u003c\/strong\u003e\n\n\u003cp\u003eThis FRAM Ultra Synthetic oil filter (model XG6607P with SureGrip) combines a dual-layer synthetic media, anti-drainback features, and heat-resistant components to support modern engines and high-mileage driving. Built to fit many applications, it works with all motor oil types and focuses on trapping contaminants while maintaining oil flow under demanding conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter improve engine oil cleanliness?\u003c\/h3\u003e\n\u003cp\u003eThe XG6607P uses a pleated, dual-layer synthetic media that increases dirt-holding capacity and filtration efficiency compared with many conventional filters. That media structure captures a wide range of particles while preserving proper oil circulation so your engine continues to receive lubrication when it needs it.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-layer synthetic media for higher contaminant capacity\u003c\/li\u003e\n  \u003cli\u003ePleated design to increase surface area and efficiency\u003c\/li\u003e\n  \u003cli\u003eRated to deliver high filtration performance across oil types\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter handle high temperatures and frequent use?\u003c\/h3\u003e\n\u003cp\u003eFRAM engineered the housing and sealing components to resist heat and repeated thermal cycles. A high-nitrile gasket and robust spring\/poppet assembly help maintain a reliable seal and consistent performance under elevated engine temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-nitrile gasket designed for durable sealing at higher temperatures\u003c\/li\u003e\n  \u003cli\u003eGlass-fiber reinforced nylon poppet and precision spring for stable operation\u003c\/li\u003e\n  \u003cli\u003eMaterials selected to resist degradation during extended service intervals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features protect the engine during start-up and long intervals?\u003c\/h3\u003e\n\u003cp\u003eThe filter includes a silicone anti-drainback valve that helps retain oil in the filter when the engine is off, reducing dry-start wear at next ignition. Combined with the filter’s capacity and media performance, this reduces the risk of contaminant bypass over longer service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone anti-drainback valve keeps oil in the filter between starts\u003c\/li\u003e\n  \u003cli\u003eHigh-capacity media supports extended mileage between changes\u003c\/li\u003e\n  \u003cli\u003eDesigned to minimize bypass and maintain flow during heavy use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation for a DIY oil change?\u003c\/h3\u003e\n\u003cp\u003eThe XG6607P comes with FRAM’s SureGrip textured surface to make handling easier even when oily, which simplifies removal and installation. Standard spin-on mounting means most home mechanics can replace it quickly following the manufacturer’s torque or hand-tightening guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSureGrip non-slip surface for secure handling during install\/removal\u003c\/li\u003e\n  \u003cli\u003eStandard spin-on format fits common oil filter locations and tools\u003c\/li\u003e\n  \u003cli\u003eInstall by hand-tightening until gasket contacts base, then snug to spec\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM XG6607P is aimed at drivers who use synthetic motor oil and want a higher-capacity filter for longer service intervals—commuters, frequent travelers, and DIY vehicle owners who prefer extended oil-change schedules. It’s also suitable for owners of newer engines requiring efficient filtration and those maintaining older engines that benefit from enhanced contaminant removal.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this FRAM filter compatible with synthetic oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The XG6607P is designed for use with synthetic and conventional motor oils.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long can I run between oil changes with this filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: FRAM advertises up to 20,000 miles under certain conditions; follow your vehicle maker and oil specifications for intervals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67594361077945,"sku":"B00BNX79RA","price":52.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-xg6607p-front-view.jpg?v=1790583364"},{"product_id":"fram-synthetic-oil-filter-xg3614p-20k-mile-high-capacity-filter-silicone-non-drain-valve","title":"Fram Synthetic Oil Filter XG3614P — 20K Mile High-Capacity Filter, Silicone Non-Drain Valve","description":"\u003cp\u003e\u003cstrong\u003eFRAM Synthetic XG3614P is a high-capacity replacement oil filter engineered to provide up to 20,000 miles of protection for engines using synthetic oil.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you use full synthetic or blend oils, this FRAM Ultra Synthetic replacement filter is built to help maintain engine cleanliness and reliable oil flow. It pairs pleated dual-layer synthetic media with a silicone non-drain back valve and an enhanced gasket to resist heat, reduce wear at start-up, and simplify installation. The XG3614P is sized and rated for select vehicle model years seeking extended-interval filtration without sacrificing efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter protect my engine during long oil-change intervals?\u003c\/h3\u003e\n\u003cp\u003eThe XG3614P uses dual-layer synthetic media with a high dirt-holding capacity to trap contaminants and help preserve oil quality over extended miles. Its pleated construction increases surface area for filtration, slowing media loading and maintaining more consistent oil flow between changes.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual-layer synthetic media for higher particle capture and capacity\u003c\/li\u003e\n\u003cli\u003ePleated design increases filtration surface area\u003c\/li\u003e\n\u003cli\u003eRated for up to 20,000 miles in compatible synthetic oil applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter protect my engine at start-up and under high temperature?\u003c\/h3\u003e\n\u003cp\u003eThe FRAM filter includes a silicone non-drain back valve that prevents oil from draining out of the filter when the engine stops, so oil is available immediately at start-up. The advanced high-nitrile gasket and durable construction resist high temperatures and pressure, helping maintain a reliable seal and performance in demanding conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicone non-drain back valve maintains oil in filter for better start-up lubrication\u003c\/li\u003e\n\u003cli\u003eHigh-nitrile gasket resists heat and pressure for longer durability\u003c\/li\u003e\n\u003cli\u003eConstruction designed to withstand high-temperature engine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install the FRAM XG3614P?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward thanks to the SureGrip textured band that gives you a secure hold during tightening, even if your hands are oily. Standard spin-on fitment allows installation with common tools, and the filter threads and gasket are designed to seat cleanly to reduce leaks when torqued to specification.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSureGrip nonslip surface for hand-tightening without slipping\u003c\/li\u003e\n\u003cli\u003eStandard spin-on design with factory-compatible threads and gasket seating\u003c\/li\u003e\n\u003cli\u003eWorks with typical shop tools for quick replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kinds of vehicles and oil types is this filter intended for?\u003c\/h3\u003e\n\u003cp\u003eThe XG3614P is formulated for use with full synthetic and synthetic-blend motor oils and fits specific vehicle model year applications; check fitment for compatibility. It’s suitable for modern engines that benefit from extended-interval oil change practices when used according to manufacturer recommendations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for full synthetic and synthetic-blend motor oils\u003c\/li\u003e\n\u003cli\u003eFits select vehicle makes and model years—verify compatibility before purchase\u003c\/li\u003e\n\u003cli\u003eAppropriate for engines that support extended service intervals with synthetic oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who use full synthetic or synthetic-blend oil and want a filter designed for extended intervals, clean oil delivery at start-up, and durable sealing under heat. Ideal for vehicle owners and professional technicians seeking a high-capacity, easy-to-install replacement filter that balances filtration efficiency with long-life performance. Always confirm vehicle fitment and follow your engine manufacturer’s oil change interval recommendations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use FRAM XG3614P with full synthetic oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The XG3614P is designed for full synthetic and synthetic-blend oils and supports extended intervals when used per vehicle manufacturer guidelines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How does the non-drain back valve help my engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The silicone non-drain back valve keeps oil in the filter at shutoff, improving immediate lubrication during the next engine start.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67594376806585,"sku":"B000C2ZKJW","price":52.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-xg3614p-front-view.jpg?v=1790583468"},{"product_id":"fram-motorcycle-oil-filter-ph6017a-spin-on-full-flow-sure-grip-non-slip-finish-up-to-95-dirt-trapping-efficiency","title":"Fram motorcycle oil filter PH6017A — spin-on full-flow, Sure GRIP non-slip finish, up to 95% dirt-trapping efficiency","description":"\u003cp\u003e\u003cstrong\u003eThe Fram PH6017A is a spin-on full-flow oil filter designed for motorcycles that delivers high dirt-trapping efficiency and reliable engine protection for routine maintenance intervals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to meet or exceed major engine maker specifications, the Fram PH6017A uses a proprietary blend of fibers and resin to capture contaminants that cause wear. Its Sure GRIP non-slip finish makes removal and installation easier whether you’re working in a cramped garage or out on the road. The filter is compatible with conventional and synthetic oils and is engineered for frequent service intervals common to motorcycle use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the PH6017A protect my motorcycle engine?\u003c\/h3\u003e\n\n\u003cp\u003eThe PH6017A uses a special media that captures a high percentage of particulate matter before it circulates through the engine. Full-flow design ensures oil is filtered continuously, helping reduce abrasive wear on bearings and moving parts during normal operation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProprietary fiber-and-resin media traps up to 95% of dirt particles\u003c\/li\u003e\n  \u003cli\u003eFull-flow architecture filters oil as it travels through the engine\u003c\/li\u003e\n  \u003cli\u003eMeets or exceeds major OEM filtration requirements for reliable fit and performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this filter with synthetic oil and long service intervals?\u003c\/h3\u003e\n\n\u003cp\u003eThe PH6017A is compatible with both conventional and synthetic motor oils, making it a flexible choice when switching oil types. Fram rates the filter for proven protection up to typical maintenance intervals around 10,000 miles, but follow your motorcycle maker’s recommendations for exact change intervals.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEngineered for use with conventional or synthetic oil\u003c\/li\u003e\n  \u003cli\u003eProven protection for up to 10,000 miles under appropriate conditions\u003c\/li\u003e\n  \u003cli\u003eDesigned for riders who perform regular maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation and removal simpler with this Fram filter?\u003c\/h3\u003e\n\n\u003cp\u003eThe Sure GRIP textured canister gives you more purchase when tightening or loosening the filter, reducing slips and protecting knuckles and tools. Its spin-on format fits standard filter wrenches and hand-installation techniques common to motorcycle maintenance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSure GRIP non-slip finish for easier handling\u003c\/li\u003e\n  \u003cli\u003eSpin-on design compatible with standard tools and hand tightening\u003c\/li\u003e\n  \u003cli\u003eCompact form factor made to fit common motorcycle mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow efficient is the media, and what contaminants does it remove?\u003c\/h3\u003e\n\n\u003cp\u003eThe PH6017A’s media composition of fibers and resin is optimized to trap fine particles that contribute to engine wear. With about 95% dirt-trapping efficiency, it captures contaminants such as metal shavings, combustion by-products, and road-borne particles that can shorten component life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eApproximately 95% dirt-trapping efficiency for fine particulates\u003c\/li\u003e\n  \u003cli\u003eRemoves metal debris and combustion residues that can abrade engine parts\u003c\/li\u003e\n  \u003cli\u003eHelps keep oil cleaner between scheduled services\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Fram PH6017A suits motorcyclists and small-engine vehicle owners who perform routine maintenance and want dependable filtration without complex installation. It’s a practical choice for riders using either conventional or synthetic oils, technicians who value an easy-grip canister, and anyone looking for a filter that aligns with common OEM specifications and service practices. For best results, pair this filter with the oil viscosity and service interval recommended by your motorcycle manufacturer.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the PH6017A compatible with synthetic oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Fram PH6017A is engineered for use with both conventional and synthetic motor oils.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace this oil filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fram rates the PH6017A for proven protection up to about 10,000 miles; follow your motorcycle manufacturer's recommended interval.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67595330289849,"sku":"B000276B2C","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ph6017a-front-view.jpg?v=1790587194"},{"product_id":"fram-extra-guard-oil-filter-ph12060-up-to-10-000-mile-protection-silicone-non-drain-back-valve","title":"Fram Extra Guard Oil Filter PH12060 — up to 10,000-mile protection, silicone non-drain back valve","description":"\u003cp\u003e\u003cstrong\u003eFRAM PH12060 Extra Guard Oil Filter is a replacement engine oil filter that delivers up to 10,000 miles of everyday protection using a durable cellulose–glass media and a silicone non-drain back valve.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you perform regular oil changes and want dependable filtration without specialty parts, the FRAM Extra Guard PH12060 is engineered for conventional and synthetic motor oils. It pairs a balanced dirt-trapping efficiency with ample dirt-holding capacity so your engine runs cleaner between services. The filter combines a textured SureGrip surface, a proprietary media blend, and enhanced hot-oil resistance to make routine maintenance faster and protect components that matter most to daily drivers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter protect my engine during everyday driving?\u003c\/h3\u003e\n\u003cp\u003eThe PH12060 uses FRAM’s proprietary blend of cellulose and glass fibers to trap abrasive particles that cause wear. It aims to remove a high percentage of contaminants while retaining capacity so filtration performance remains consistent across the service interval.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUp to 95% dirt-trapping efficiency to reduce abrasive debris.\u003c\/li\u003e\n  \u003cli\u003eBalanced dirt-holding capacity for stable filtration through the mileage interval.\u003c\/li\u003e\n  \u003cli\u003eCompatible with conventional and synthetic motor oils for flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features make installation and start-up protection better?\u003c\/h3\u003e\n\u003cp\u003eFRAM designed the PH12060 with practical features that simplify oil changes and protect the engine at start-up. A silicone non-drain back valve helps preserve oil in the filter when the engine is off, improving lubrication on restart, while the SureGrip textured surface speeds up removal and installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone non-drain back valve retains oil for quicker, safer starts.\u003c\/li\u003e\n  \u003cli\u003eSureGrip textured exterior for easier hand or wrench grip during service.\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists hot oil conditions for reliable operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and intervals is the FRAM PH12060 suited for?\u003c\/h3\u003e\n\u003cp\u003eThe PH12060 fits a broad range of popular GM, Ford, Buick, Cadillac, Lincoln and other models listed for this part. It’s engineered to meet manufacturer-recommended change intervals and is suitable for drivers who follow routine oil change schedules up to the product’s rated mileage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many Chevrolet, GMC, Ford, Buick, Cadillac and Lincoln models.\u003c\/li\u003e\n  \u003cli\u003eIntended for use with both conventional and synthetic motor oils.\u003c\/li\u003e\n  \u003cli\u003eRated to provide protection and filtration up to 10,000 miles under typical conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The FRAM PH12060 Extra Guard oil filter is aimed at everyday drivers and DIY enthusiasts who perform regular maintenance and want a cost-effective, dependable filter for routine oil changes. If you drive a compatible vehicle and value straightforward installation, reliable contaminant capture, and improved start-up protection, this filter balances performance and convenience without requiring specialized products or service intervals outside manufacturer guidance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the PH12060 with synthetic oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The FRAM PH12060 is compatible with both conventional and synthetic motor oils.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does this filter protect my engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: FRAM rates the PH12060 to provide protection for up to 10,000 miles under typical driving and maintenance conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67595451891897,"sku":"B01M3P62DG","price":52.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-ph12060-front-view.jpg?v=1790587749"},{"product_id":"fram-synthetic-oil-filter-xg7317p-20-000-mile-extended-protection-dual-layer-media","title":"Fram Synthetic Oil Filter XG7317P — 20,000 Mile Extended Protection, Dual-Layer Media","description":"\u003cp\u003e\u003cstrong\u003eFRAM Synthetic XG7317P is a replacement automotive oil filter built with dual-layer synthetic media and a silicone non-drain back valve to protect engines for up to 20,000 miles when used with synthetic oil.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premium FRAM oil filter is designed specifically for drivers who use full synthetic motor oil and want extended service intervals without sacrificing filtration performance. It combines high-capacity pleated media with a heat-resistant gasket and SureGrip surface so you can install the filter quickly and keep contaminants from entering the engine at start-up.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter improve engine protection during long intervals?\u003c\/h3\u003e\n\u003cp\u003eThe XG7317P’s dual-layer synthetic media captures microscopic particles and holds more debris than standard filters, helping preserve oil cleanliness over extended miles. Its high-capacity design reduces clogging risk and maintains flow to the engine under prolonged service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-layer synthetic media for finer particle capture and higher capacity\u003c\/li\u003e\n  \u003cli\u003eRated up to 20,000 miles when paired with synthetic oil\u003c\/li\u003e\n  \u003cli\u003ePleated construction to increase surface area and debris-holding ability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features help protect the engine at startup and under heat?\u003c\/h3\u003e\n\u003cp\u003eThe silicone non-drain back valve prevents oil from draining out of the filter when the engine is off, so critical components receive lubrication right away on cold starts. An advanced high-nitrile gasket and hot-oil-resistant materials help the filter withstand heat and pressure during long drives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone non-drain back valve for immediate startup lubrication\u003c\/li\u003e\n  \u003cli\u003eHigh-nitrile gasket resists heat and compression for longer life\u003c\/li\u003e\n  \u003cli\u003eMaterials engineered to tolerate high-temperature exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward for DIY oil changes?\u003c\/h3\u003e\n\u003cp\u003eYes — FRAM added a SureGrip textured surface to make hand-tightening and removal easier, even if your hands are oily. Installation follows typical spin-on filter steps; screw on until the gasket contacts the base, then tighten to spec.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSureGrip nonslip surface for easier hand installation and removal\u003c\/li\u003e\n  \u003cli\u003eStandard spin-on fit compatible with select vehicle models and years\u003c\/li\u003e\n  \u003cli\u003eCompact design for straightforward access in most engine bays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat oil types and vehicles is this filter compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe XG7317P is engineered to work with all motor oil types but is optimized for use with full synthetic oils that support long drain intervals. Always verify fitment for your specific vehicle year and engine to ensure correct compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimized for full synthetic oil and long-interval changes\u003c\/li\u003e\n  \u003cli\u003eWorks with conventional and blended oils as well\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle fitment charts to confirm correct model years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM Synthetic XG7317P is aimed at owners who run full synthetic oil and want extended service between changes without compromising filtration. It’s a solid choice for routine DIY maintenance, professional shops offering long-drain services, or drivers of compatible vehicles seeking durable startup protection and high contaminant-holding capacity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this FRAM filter with conventional oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The XG7317P works with conventional, blended, and synthetic oils, but its design is optimized for full synthetic long-drain intervals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know it fits my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Verify fitment using your vehicle make, model, and year against FRAM or retailer fitment charts before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67595477680313,"sku":"B000C33MI2","price":52.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-xg7317p-front-view.jpg?v=1790588066"},{"product_id":"fram-synthetic-xg4967p-engine-oil-filter-20k-mile-synthetic-dual-layer-media-silicone-valve","title":"Fram Synthetic XG4967P Engine Oil Filter — 20K Mile Synthetic, Dual-Layer Media \u0026 Silicone Valve","description":"\u003cstrong\u003eFRAM Synthetic XG4967P is a high-capacity oil filter engineered for synthetic oil changes and rated to help protect your engine up to 20,000 miles under normal driving conditions.\u003c\/strong\u003e\n\n\u003cp\u003eThis premium replacement engine oil filter is built for drivers who use full synthetic motor oil and want extended service intervals without sacrificing filtration performance. FRAM designed the XG4967P with dual-layer synthetic media, a silicone non-drain back valve, and a SureGrip textured shell to make installation easier while maintaining strong contaminant capture and reliable start-up protection.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter work with full synthetic oil?\u003c\/h3\u003e\n\u003cp\u003eThe XG4967P is optimized to handle the flow characteristics and detergents in full synthetic lubricants. Its dual-layer synthetic media captures a wide range of particles and holds them without compromising oil flow, so the oil can continue protecting engine components over longer drain intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUltimate dual-layer synthetic media designed for synthetic oil compatibility\u003c\/li\u003e\n  \u003cli\u003eHigh-capacity pleated construction increases dirt-holding ability\u003c\/li\u003e\n  \u003cli\u003eMaintains oil flow while trapping contaminants for cleaner output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection features are included for engine start-up and heat resistance?\u003c\/h3\u003e\n\u003cp\u003eTo reduce dry-start wear and perform under high temperatures, the filter includes a silicone non-drain back valve and heat-resistant components. These features help retain oil in the filter and resist degradation from repeated hot cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone non-drain back valve provides improved start-up oil retention\u003c\/li\u003e\n  \u003cli\u003eHigh-nitrile gasket resists heat and maintains seal integrity\u003c\/li\u003e\n  \u003cli\u003eMaterials engineered for sustained performance under thermal stress\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long can I expect this filter to last between changes?\u003c\/h3\u003e\n\u003cp\u003eFRAM rates the XG4967P for up to 20,000 miles when used with synthetic oil under normal driving conditions. Actual life varies with driving style, vehicle type, and operating conditions, so follow vehicle manufacturer guidance for service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for up to 20,000 miles with full synthetic oil\u003c\/li\u003e\n  \u003cli\u003eHigh-efficiency media delivers 99%+ filtration performance in many conditions\u003c\/li\u003e\n  \u003cli\u003eRecommended to follow OEM and driving-condition-based schedules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the XG4967P easy to install and remove?\u003c\/h3\u003e\n\u003cp\u003eYes — the exterior features FRAM's SureGrip texture to help you get a firm hold during installation and removal, reducing the need for messy hand positioning. The filter threads on until the gasket seats and then should be tightened per common oil filter practices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSureGrip nonslip surface for easier hand tightening\u003c\/li\u003e\n  \u003cli\u003eStandard spin-on design fits compatible vehicle applications\u003c\/li\u003e\n  \u003cli\u003eGasket and baseplate engineered for reliable sealing and fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The FRAM Synthetic XG4967P is suited for vehicle owners who use full synthetic motor oil and want a durable, high-capacity spin-on filter that supports extended drain intervals. It's appropriate for drivers seeking improved contaminant capture and dependable start-up protection, as well as DIY enthusiasts who appreciate an easier grip during filter changes. Always confirm fitment for your specific vehicle model year before purchase and follow your vehicle manufacturer's maintenance recommendations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the XG4967P with any motor oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is designed for all motor oil types but is optimized for use with full synthetic oil for extended intervals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this filter really last 20,000 miles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: FRAM rates it for up to 20,000 miles with synthetic oil under normal driving; actual life depends on conditions and vehicle use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67595525095609,"sku":"B000C2ZKJC","price":52.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-front-packaging-xg4967p.jpg?v=1790588930"},{"product_id":"fram-synthetic-xg10060p-oil-filter-20-000-mile-high-capacity-dual-layer-synthetic-media","title":"Fram Synthetic XG10060P Oil Filter — 20,000-Mile High-Capacity, Dual-Layer Synthetic Media","description":"\u003cp\u003e\u003cstrong\u003eFRAM XG10060P is a high-capacity synthetic replacement oil filter engineered to deliver up to 20,000 miles of protection with dual-layer synthetic media and a silicone non-drain back valve.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you use full synthetic oil or want longer intervals between changes, this FRAM Ultra Synthetic filter is built to capture contaminants, resist high heat, and simplify installation. It combines pleated, dual-layer filtration media with a durable gasket and non-drain back valve so engines receive cleaner oil flow at startup and under heavy conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the FRAM XG10060P improve engine cleanliness and performance?\u003c\/h3\u003e\n\u003cp\u003eThe filter uses a pleated, dual-layer synthetic media that traps fine particles and combustion byproducts more effectively than standard filters. With claimed 99%+ filtration efficiency, it reduces circulating contaminants to help maintain oil integrity and consistent lubrication.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-layer synthetic media for higher dirt-holding capacity\u003c\/li\u003e\n  \u003cli\u003ePleated design increases surface area for finer filtration\u003c\/li\u003e\n  \u003cli\u003eRated for up to 20,000 miles when matched with recommended synthetic oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter protect my engine during cold starts and high-heat operation?\u003c\/h3\u003e\n\u003cp\u003eYes — the FRAM XG10060P includes a silicone non-drain back valve that prevents oil from leaving the filter when the engine is off, ensuring immediate oil delivery at startup. The high-nitrile gasket and heat-resistant construction also help the filter withstand elevated underhood temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone non-drain back valve preserves oil in the filter for quicker lubrication\u003c\/li\u003e\n  \u003cli\u003eHigh-nitrile gasket resists heat and compression for longer life\u003c\/li\u003e\n  \u003cli\u003eHot-oil resistant materials guard performance in high-temperature conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance with this FRAM oil filter?\u003c\/h3\u003e\n\u003cp\u003eThe filter features FRAM’s SureGrip textured surface to reduce slipping during hand-tightening, making it straightforward to replace during routine maintenance. Installation requires standard oil filter change steps and ends when the gasket contacts the mounting base and you snug the filter to specification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSureGrip nonslip surface for easier hand installation\u003c\/li\u003e\n  \u003cli\u003eStandard spin-on canister fits compatible applications listed for XG10060P\u003c\/li\u003e\n  \u003cli\u003eWorks with all motor oil types, optimized for full synthetic oil change intervals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM XG10060P is suited to drivers who use full synthetic oil and want longer change intervals, owners of vehicles compatible with this filter size, and anyone seeking a higher-capacity aftermarket filter built for heat resistance and strong filtration. It’s a practical choice for commuters, long-distance drivers, and mechanics who prefer a reliable, easy-to-install replacement part that balances filtration performance with extended service life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many miles is the FRAM XG10060P rated for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: FRAM rates this filter for up to 20,000 miles when used with full synthetic oil and following manufacturer maintenance intervals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the XG10060P include a non-drain back valve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it has a silicone non-drain back valve to help retain oil and protect the engine at startup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67595545411769,"sku":"B002QH5VVI","price":52.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-xg10060p-front-view.jpg?v=1790589262"},{"product_id":"fram-synthetic-engine-oil-filter-xg9972p-20k-mile-high-capacity-silicone-valve","title":"Fram Synthetic Engine Oil Filter XG9972P — 20K‑Mile High-Capacity, Silicone Valve","description":"\u003cp\u003e\u003cstrong\u003eFRAM Synthetic XG9972P is a high-capacity engine oil filter built for use with full synthetic oil, engineered to help protect engines up to 20,000 miles between changes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you drive a newer vehicle that needs consistent filtration or an older car where added protection matters, this replacement oil filter combines dual-layer synthetic media, a silicone non-drain back valve, and a nonslip grip to deliver reliable performance. It is compatible with all motor oil types and designed to trap particulates and exhaust byproducts for cleaner oil circulating through the engine.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter improve engine protection during long oil-change intervals?\u003c\/h3\u003e\n\u003cp\u003eThe FRAM Synthetic XG9972P uses dual-layer synthetic media that captures fine particles and contaminants to maintain oil cleanliness for extended service intervals. Its high-capacity pleated design provides increased surface area so the filter can hold more debris without restricting flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-layer synthetic media for high-efficiency particle capture\u003c\/li\u003e\n  \u003cli\u003ePleated high-capacity design for extended dirt-holding capacity\u003c\/li\u003e\n  \u003cli\u003eRated for up to 20,000 miles with compatible synthetic oils (follow vehicle manufacturer guidance)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features reduce wear at engine start-up?\u003c\/h3\u003e\n\u003cp\u003eThis oil filter includes a silicone non-drain back valve that helps retain oil in the filter and oil galleries when the engine is off, improving lubrication on the next start. The valve material resists high heat so it maintains its sealing and performance over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone non-drain back valve to prevent dry starts\u003c\/li\u003e\n  \u003cli\u003eUp to three times better hot oil resistance versus some conventional valves\u003c\/li\u003e\n  \u003cli\u003eConsistent oil delivery on initial cranking for faster lubrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation and handling easier with this FRAM filter?\u003c\/h3\u003e\n\u003cp\u003eThe Filter’s SureGrip textured surface gives a nonslip hold for hand-tightening, making removal and installation cleaner and faster even when hands are oily. The gasket design seats reliably at base contact so users can follow a simple tighten procedure for a secure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSureGrip nonslip surface for easier manual tightening and removal\u003c\/li\u003e\n  \u003cli\u003eDurable high-nitrile gasket that resists pressure and heat\u003c\/li\u003e\n  \u003cli\u003eStandard spin-on design for quick, tool-assisted or hand installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich oils and vehicle types is this filter compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe XG9972P is formulated to work with conventional, synthetic-blend, and full synthetic motor oils, allowing flexibility across different maintenance strategies. It fits specific vehicle applications—always confirm fitment for your make, model, and year before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for use with all motor oil types, including full synthetic\u003c\/li\u003e\n  \u003cli\u003eHigh-efficiency media suitable for modern engine tolerances\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle application chart or OEM recommendations for compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis FRAM Synthetic XG9972P oil filter is ideal for DIY mechanics, service shops, and drivers who use full synthetic oil and want a high-capacity filter for extended intervals. If you need dependable filtration capacity, a non-drain back valve for better start-up protection, and an easier installation experience, this filter is a practical upgrade—provided it matches your vehicle's specified filter part number and change interval recommendations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many miles can I run the FRAM XG9972P?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This filter is designed for up to 20,000 miles when used with compatible full synthetic oil; follow your vehicle maker's maintenance schedule.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this filter with conventional oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the XG9972P is compatible with conventional, synthetic-blend, and full synthetic motor oils.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67595546394809,"sku":"B00EAOI93W","price":52.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-xg9972p-front-view.jpg?v=1790589280"},{"product_id":"fram-synthetic-xg9688p-engine-oil-filter-20k-mile-protection-silicone-anti-drainback-valve","title":"Fram Synthetic XG9688P Engine Oil Filter — 20K Mile Protection, Silicone Anti‑Drainback Valve","description":"\u003cp\u003e\u003cstrong\u003eFRAM Synthetic XG9688P is a high-capacity engine oil filter designed for use with full synthetic oils, offering up to 20,000 miles of protection and 99%+ filtration efficiency.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement oil filter is built to help drivers get the most from synthetic motor oils and high-mileage service intervals. Its dual-layer synthetic media captures contaminants effectively, while durable components — including a silicone anti-drainback valve and a high-nitrile gasket — resist heat, pressure, and oil degradation. The SureGrip textured surface simplifies installation and removal so DIYers and technicians can work faster and cleaner.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter protect engines during start-up?\u003c\/h3\u003e\n\u003cp\u003eThe FRAM XG9688P uses a silicone non-drain back valve that prevents oil from draining out of the filter when the engine is off. That retained oil means immediate lubrication at start-up, reducing wear during the engine’s most vulnerable seconds. The silicone construction also withstands hot oil better than many standard valves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone anti-drainback valve keeps oil in the filter for instant lubrication.\u003c\/li\u003e\n  \u003cli\u003eUp to 3X hot oil resistance compared with conventional valves.\u003c\/li\u003e\n  \u003cli\u003eReduces dry-start wear by maintaining oil pressure at cranking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat filtration performance can I expect over long service intervals?\u003c\/h3\u003e\n\u003cp\u003eFRAM engineered this filter with dual-layer synthetic pleated media that captures a wide range of particles and combustion byproducts. The media targets more than 99% filtration efficiency, supporting extended synthetic oil service intervals without sacrificing cleanliness. This makes the filter suitable for owners who prefer longer drain intervals up to the manufacturer-recommended limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-layer synthetic media for high dirt-holding capacity.\u003c\/li\u003e\n  \u003cli\u003e99%+ filtration efficiency against common engine contaminants.\u003c\/li\u003e\n  \u003cli\u003eDesigned to work with all motor oil types, especially full synthetics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the XG9688P easy to install and durable under heat?\u003c\/h3\u003e\n\u003cp\u003eYes — the SureGrip nonslip surface provides a firmer hold for hand tightening and removal, cutting down on messy slips during oil changes. The filter also includes a high-nitrile gasket to resist high temperatures and pressure, extending the gasket life under demanding conditions. Together these features support reliable sealing and simplified servicing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSureGrip textured surface for easier, cleaner installation.\u003c\/li\u003e\n  \u003cli\u003eHigh-nitrile gasket resists heat and pressure for longer service life.\u003c\/li\u003e\n  \u003cli\u003eBuilt to withstand road and engine heat for consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this filter handle high-mileage or heavy-duty driving?\u003c\/h3\u003e\n\u003cp\u003eFRAM designed the XG9688P for drivers who rack up miles or prefer longer synthetic oil intervals. With a rated capability up to 20,000 miles under appropriate conditions and oil choices, this filter balances capacity and efficiency for extended use. Always follow your vehicle manufacturer’s service recommendations and monitor oil condition for best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for up to 20,000 miles with compatible synthetic oil and driving conditions.\u003c\/li\u003e\n  \u003cli\u003eHigh-capacity pleated media supports long service intervals.\u003c\/li\u003e\n  \u003cli\u003eDurable components reduce the need for premature replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FRAM Synthetic XG9688P is aimed at vehicle owners who use full synthetic oil, drivers that log high annual mileage, and DIY mechanics who want a durable, easy-to-install filter for extended oil-change intervals. It’s also a solid choice for technicians and fleet operators seeking a reliable replacement filter that balances filtration efficiency with long service life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long can I run the FRAM XG9688P between oil changes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s rated up to 20,000 miles with compatible full synthetic oil and proper driving conditions; follow your vehicle maker’s recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this filter prevent oil from draining when the engine is off?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The silicone anti-drainback valve retains oil in the filter to improve start-up lubrication and reduce wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fram","offers":[{"title":"Default Title","offer_id":67595558453433,"sku":"B004A0RDQ0","price":52.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fram-xg9688p-front-view.jpg?v=1790589551"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/fram-xg9688p-front-view.jpg?v=1790612582","url":"https:\/\/redleafauto.ca\/collections\/fram.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}