{"title":"Gledewen","description":"\u003cp\u003eBrowse 82 Gledewen products at RedLeaf Auto, including body \u0026amp; trim parts, shocks, struts \u0026amp; suspension and fuel system parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"gledewen-52mm-wideband-afr-gauge-kit-with-lsu-4-9-sensor-fast-20ms-response-0-5v-rs232-outputs","title":"Gledewen 52mm Wideband AFR Gauge Kit with LSU 4.9 Sensor — Fast 20ms Response, 0–5V\/RS232 Outputs","description":"\u003cp\u003e\u003cstrong\u003eThe Gledewen 30-0300 is a 52mm wideband UEGO air-fuel ratio gauge kit with an LSU 4.9 sensor and controller that reads AFR, Lambda or O2% in real time for precise engine tuning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit combines a reversible 52mm dashboard gauge, a fast-response LSU 4.9 wideband oxygen sensor, and the wiring and connectors needed for installation. It outputs 0–5V analog and RS-232 serial signals for datalogging or engine management integration, responds in about 20ms, and supports configurable display and calibration modes so you can monitor combustion safely and accurately while tuning.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the gauge show air\/fuel changes while driving?\u003c\/h3\u003e\n\u003cp\u003eThe gauge continuously measures exhaust oxygen with the LSU 4.9 sensor and updates the display in near real time. You can view AFR, Lambda, or oxygen percentage, and choose 3- or 4-digit precision depending on the level of detail you need.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24-color LED sweep for quick visual trend recognition\u003c\/li\u003e\n  \u003cli\u003eCentral numerical readout with selectable 3 or 4 digit modes\u003c\/li\u003e\n  \u003cli\u003eTypical response time around 20 ms for fast feedback\u003c\/li\u003e\n  \u003cli\u003eDisplays range: AFR 8.0:1 to 20.0:1, Lambda 0.55–2.00\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat calibration and wiring options are available?\u003c\/h3\u003e\n\u003cp\u003eThe gauge supports two calibration approaches: resistor-trim (rCAL) and free-air (ACAL). The supplied sensor is factory-trimmed with a resistor in the connector for immediate accuracy, while ACAL lets you fine-tune on-site if desired. Power and signal connections are straightforward for common 12V systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003erCAL: factory resistor built into the sensor connector for recommended accuracy\u003c\/li\u003e\n  \u003cli\u003eACAL: free-air calibration alternative for field adjustment\u003c\/li\u003e\n  \u003cli\u003eWiring: PWR\/IO cable, sensor harness, and butt connectors included\u003c\/li\u003e\n  \u003cli\u003eCompatible up to 16V vehicle\/system voltage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I integrate this unit with dataloggers or ECUs?\u003c\/h3\u003e\n\u003cp\u003eYes — the controller offers both a 0–5V analog output and an RS-232 serial output for external logging or engine-management systems. These outputs let tuners and racers record continuous AFR data or feed it to closed-loop controllers for performance adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e0–5V analog output for universal ECU\/datalogger input\u003c\/li\u003e\n  \u003cli\u003eSerial RS-232 port for precise data transfer and analysis\u003c\/li\u003e\n  \u003cli\u003eConfigurable display modes to match your logging needs\u003c\/li\u003e\n  \u003cli\u003eAuto-dimming face for night-driving readability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Gledewen 30-0300 wideband kit is aimed at DIY tuners, performance shops, and motorsport enthusiasts who need a reliable, compact wideband solution. It suits street and track applications where quick, accurate AFR feedback is required for safe tuning, fuel-mapping, or engine troubleshooting. If you plan to log data or interface with an ECU and want a fast LSU 4.9 sensor with flexible calibration and clear visual feedback, this kit delivers the essential tools and connectors for a tidy installation and consistent readings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this gauge work with 12V vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is designed for 12V systems and supports vehicle\/system voltages up to 16V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What outputs are available for logging or ECU use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It provides a 0–5V analog output and RS-232 serial output for dataloggers or engine management integration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67585007026361,"sku":"B0CJHS2FWN","price":215.26,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-gauge-display.jpg?v=1790463241"},{"product_id":"gledewen-standalone-wiring-harness-for-1997-2006-gm-ls1-vortec-4-8-6-0l-txl-wire-1200-f-glass-braid","title":"Gledewen Standalone Wiring Harness for 1997-2006 GM LS1\/Vortec 4.8–6.0L — TXL Wire \u0026 1200°F Glass Braid","description":"\u003cb\u003eGledewen Standalone Wiring Harness is a complete, plug-and-play engine and transmission wiring solution built for 1997–2006 GM LS1\/Vortec engines with drive-by-cable throttle bodies and 4L60E\/4L80E transmissions.\u003c\/b\u003e\n\n\u003cp\u003eThis harness supplies all necessary engine and transmission connectors, factory-style Delphi plugs, and high-temperature TXL wire so you can install a Vortec LS swap or replace a factory harness with a near-OEM fit. It ships as a full kit with an English manual, mounting screws, reinforced ring terminals, braided heat sleeve protection, and universal color coding to simplify routing and hookups. The design focuses on serviceability and compatibility with common GM fuel injection and transmission control circuits used on 4.8L, 5.3L, and 6.0L Vortec engines.\u003c\/p\u003e\n\n\u003ch3\u003eWhat connectors and sensors are included with this wiring harness?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen harness includes all engine and transmission sensor connectors required for basic EFI and transmission operation. It uses GM Delphi EV1-style injector plugs and TXL high-temperature wiring to meet original-equipment standards for connections and durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEV1 fuel injector connectors for 8 injectors\u003c\/li\u003e\n  \u003cli\u003eCrank and cam sensor circuits and compatible plugs\u003c\/li\u003e\n  \u003cli\u003e3-wire MAF connector and standard sensor pigtails\u003c\/li\u003e\n  \u003cli\u003e6 fuse blocks and reinforced ring terminals for power distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the harness handle heat, wear, and installation routing?\u003c\/h3\u003e\n\u003cp\u003eGledewen uses a 1200°F-rated glass-fiber braid on circuit bundles and TXL wire insulation to resist high under-hood temperatures and chemicals. The sleeve is slidable for clean routing under the dash or into the right-side kick panel, and connectors include factory CPA locks for secure engagement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1200-degree glass fiber braided sleeves for thermal protection\u003c\/li\u003e\n  \u003cli\u003eTXL polyethylene cross-linked wires for abrasion and chemical resistance\u003c\/li\u003e\n  \u003cli\u003eSlidable sleeve design to ease routing and trimming during install\u003c\/li\u003e\n  \u003cli\u003eFactory-style CPA connector locks for positive mating and reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I need PCM programming or emission provisions when using this standalone harness?\u003c\/h3\u003e\n\u003cp\u003eThis harness omits dedicated circuits for EGR, air pump, and CCP emission accessories because they are not required for engine operation; however, your PCM may flag Diagnostic Trouble Codes (DTCs) if the ECM expects those components. Removing VATS (vehicle anti-theft system) from the PCM is required for all Vortec engines when using a standalone harness; PCM reprogramming or tuning may be necessary to eliminate emission-related or VATS DTCs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEGR, air pump, and CCP wiring not included—these functions are not needed for running the engine\u003c\/li\u003e\n  \u003cli\u003eVATS must be disabled or removed from PCM for proper operation\u003c\/li\u003e\n  \u003cli\u003ePCM tuning\/programming may be required to suppress DTCs from missing emission equipment\u003c\/li\u003e\n  \u003cli\u003eAdapter needed if using a 4L80E transmission in place of 4L60E\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the kit include installation instructions and a warranty?\u003c\/h3\u003e\n\u003cp\u003eThe harness ships with a detailed English installation manual and a parts list to help guide wiring and connector locations. Gledewen backs the product with a 10-year (120-month) warranty against manufacturing defects and offers customer support for troubleshooting or replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete English manual included for step-by-step guidance\u003c\/li\u003e\n  \u003cli\u003eComes with two mounting screws and all necessary connector housings\u003c\/li\u003e\n  \u003cli\u003e10-year warranty and direct support for issues or failures\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Gledewen standalone LS1 wiring harness is suited for mechanics, professional shops, and experienced DIYers performing LS-series swaps or replacing worn factory harnesses on 1997–2006 GM vehicles with drive-by-cable Vortec engines. It is tailored for projects using a 4.8L, 5.3L, or 6.0L Vortec motor with a 4L60E transmission (or 4L80E with adapter), where OEM-style connectors, heat-resistant wiring, and a complete engine\/transmission connector set are needed. If you require emission harnessing, full EGR\/air-pump circuitry, or factory anti-theft integration, plan for PCM programming or additional wiring to match your vehicle's original equipment setup.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this harness support 4L80E transmissions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—compatible with 4L80E when using the appropriate adapter; the kit is built for 4L60E by default.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are EGR and air pump circuits included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this standalone harness omits EGR and air pump wiring; PCM tuning may be needed to avoid related DTCs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67585445560505,"sku":"B09PMJ3JPK","price":212.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-harness-front-overview.jpg?v=1790470397"},{"product_id":"gledewen-fuel-line-kit-for-2004-2010-chevy-silverado-gmc-sierra-1500-3500-nylon-fuel-and-vent-lines-quick-connect-fit","title":"Gledewen Fuel Line Kit for 2004-2010 Chevy Silverado \u0026 GMC Sierra 1500-3500 — Nylon Fuel and Vent Lines, Quick-Connect Fit","description":"\u003cp\u003e\u003cstrong\u003eGledewen fuel and vent line kit replaces corroded metal lines on 2004–2010 Chevrolet Silverado and GMC Sierra trucks for a reliable fuel feed and sealed connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the original fuel or vent lines on your Silverado or Sierra are rusted, cracked, or leaking, this complete replacement kit restores safe fuel routing and helps prevent evaporative emissions issues. The set includes a new fuel line, vent hose, a metal connector, quick-connect fittings and accessories engineered to match factory routing and part numbers FL-FG0340 \/ FG0340.\u003c\/p\u003e\n\n\u003ch3\u003eWhich trucks and engines does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed specifically for model years 2004 through 2010 of Chevrolet Silverado and GMC Sierra 1500, 2500, and 3500 pickups with common V6 and V8 engines. It covers 4.3L, 4.8L, 5.3L, 6.0L and 8.1L variants and fits all wheelbase lengths except certain Flex Fuel cab chassis models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2004–2010 Silverado\/Sierra 1500, 2500, 3500 (4.3L–8.1L)\u003c\/li\u003e\n  \u003cli\u003eExact OE cross-references: FL-FG0340, FLFG0340, FG0340\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 2004–2005 Flex Fuel cab chassis trucks\u003c\/li\u003e\n  \u003cli\u003eDesigned to replace rust-prone metal fuel and vent lines mounted to the frame\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how do they improve performance?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains all the pieces needed to replace worn or corroded lines — minimizing fuel leaks and restoring secure connections. High-quality nylon construction resists rust and environmental degradation, offering longer service life than metal lines that sit near road grime and salt.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 1 fuel line, 1 vent line, 1 metal connector\u003c\/li\u003e\n  \u003cli\u003eIncludes 2 plastic quick-connect fittings and 2 quick-connect accessories\u003c\/li\u003e\n  \u003cli\u003eFour zip ties for routing and securing the lines\u003c\/li\u003e\n  \u003cli\u003eNylon tubing resists cracking, corrosion, salt and mud\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and who should do it?\u003c\/h3\u003e\n\u003cp\u003eInstallation replaces frame-mounted metal lines with pre-sized nylon parts intended to match OEM routing and connections. While designed for a straightforward swap, working on fuel systems carries safety considerations — using a trained technician or experienced DIYer with appropriate tools is recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-sized components for direct replacement of rusted metal lines\u003c\/li\u003e\n  \u003cli\u003eQuick-connect fittings to simplify attachment to factory connectors\u003c\/li\u003e\n  \u003cli\u003eZip ties included to secure hoses to the frame\u003c\/li\u003e\n  \u003cli\u003eIf unsure, professional installation reduces leak risk and ensures proper routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances are provided?\u003c\/h3\u003e\n\u003cp\u003eGledewen inspects each fuel line assembly and backs the kit with a 24-month warranty for replacement or refund if issues arise. The kit is manufactured to meet fit and function expectations and carries the listed OE reference numbers for part confirmation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24-month limited warranty for replacement or refund\u003c\/li\u003e\n  \u003cli\u003eManufactured to replace original rusted metal lines reliably\u003c\/li\u003e\n  \u003cli\u003ePassed multi-inspection processes for fitment and sealing performance\u003c\/li\u003e\n  \u003cli\u003eOE part number cross-references included for verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Gledewen fuel and vent line kit is intended for owners, mechanics and fleet managers who maintain 2004–2010 Chevrolet Silverado or GMC Sierra trucks (1500\/2500\/3500) with 4.3L–8.1L engines and need a durable, corrosion-resistant replacement for aging frame-mounted fuel and vent lines. It’s especially useful where original metal lines have begun to rust or leak, and when a longer-lasting nylon solution is preferred. For safety and optimal results, have a qualified technician perform the replacement if you are not experienced working on vehicle fuel systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2006 Chevy Silverado 5.3L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Gledewen kit fits 2004–2010 Silverado 1500 models including the 5.3L engine, excluding 2004–2005 Flex Fuel cab chassis trucks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the kit myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: An experienced DIYer can install it, but because it involves fuel lines, professional installation is recommended for safety and leak prevention.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67585798832313,"sku":"B0D7616DKT","price":121.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-fuel-lines-kit-front-packaging.jpg?v=1790477815"},{"product_id":"gledewen-exterior-door-handle-set-4pc-compatible-with-1999-2007-chevy-gmc-cadillac-chrome-lever-black-housing-direct-fit","title":"Gledewen Exterior Door Handle Set — 4PC Compatible with 1999–2007 Chevy\/GMC\/Cadillac, Chrome Lever \u0026 Black Housing, Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eGledewen's 4-piece exterior door handle set replaces worn exterior handles on compatible Chevy, GMC and Cadillac trucks with chrome-lever, black-housing units for an OEM-style look.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your truck's exterior handles are cracked, loose or tarnished, this complete four-piece set restores both appearance and function across front and rear doors. Each handle uses a chrome-plated lever with a black housing and includes a keyed hole where applicable, matching factory fitment for many GM full-size trucks and SUVs from roughly 1999–2007. The set is sold new and covers driver and passenger sides so you can update all exterior handles at once without mixing old and new parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models and years will these handles fit?\u003c\/h3\u003e\n\u003cp\u003eThese handles are designed to be direct replacements for many Chevrolet, GMC and Cadillac models from the 1999–2007 era. They match common OE part numbers so they slip into original mounting points without shaving or welding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Silverado 1500\/2500\/3500 (1999–2007 variations), Tahoe, Suburban (2000–2006), Avalanche (2002–2006), Escalade (2002–2006)\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra 1500\/2500\/3500 (1999–2007 variations), Yukon\/Yukon XL (2000–2006), Yukon Denali (2002–2005)\u003c\/li\u003e\n  \u003cli\u003eCadillac: Escalade, Escalade ESV, Escalade EXT (2002–2006)\u003c\/li\u003e\n  \u003cli\u003eCompatible OE replacement numbers included for cross-referencing during purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these handles compare to original equipment?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen handles are built to match OEM dimensions and mounting points while offering refreshed chrome finish. They are sold as direct-fit replacements intended to function like factory parts without the OEM price tag.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome-lever with black housing replicates factory styling and fit\u003c\/li\u003e\n  \u003cli\u003ePre-drilled keyhole on front handles where applicable\u003c\/li\u003e\n  \u003cli\u003eDesigned to accept original linkage and fasteners for straightforward swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a simple do-it-yourself job for most owners with common hand tools and about 15–30 minutes per door. The handles replace old units using existing screws and linkage; no cutting or drilling is required when matched to the correct model\/year.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove interior door panel to access mounting nuts\u003c\/li\u003e\n  \u003cli\u003eDisconnect linkage, remove old handle, bolt in new handle, reconnect linkage\u003c\/li\u003e\n  \u003cli\u003eReinstall panel and test latch and lock operation before finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material and finish details?\u003c\/h3\u003e\n\u003cp\u003eEach unit features a chrome-plated lever combined with a durable black plastic housing. The finish aims to resist oxidation and scratching while maintaining a bright appearance comparable to factory trim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpgrade chrome plating for higher gloss and wear resistance\u003c\/li\u003e\n  \u003cli\u003ePlastic housing matched to OEM contours for correct clearance\u003c\/li\u003e\n  \u003cli\u003eSale includes four handles: front left\/right and rear left\/right\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This four-piece Gledewen handle set is targeted at owners of late-1990s to mid-2000s Chevrolet, GMC or Cadillac full-size trucks and SUVs who need an affordable, OEM-style replacement for damaged or worn exterior door handles. It suits DIY mechanics, restoration projects, fleet maintenance, and anyone wanting consistent appearance across all doors without paying dealer prices. Before ordering, verify your vehicle year and door configuration against the listed compatible models and OE numbers to ensure a correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these handles include both front and rear pieces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the set includes four exterior handles: front left\/right and rear left\/right with chrome levers and black housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my 2003 Chevy Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit most 2003 Silverado 1500\/2500\/3500 models—confirm compatibility using your vehicle year and the listed OE part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67585907589305,"sku":"B0B6HWRRB1","price":125.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-passenger-door-handle-assembly.jpg?v=1790479739"},{"product_id":"gledewen-locking-fuel-cap-kit-for-freightliner-cascadia-columbia-century-2-pack-3-inch-die-cast-aluminum-with-4-matching-keys","title":"Gledewen Locking Fuel Cap Kit for Freightliner Cascadia\/Columbia\/Century — 2-Pack 3-inch Die-Cast Aluminum with 4 Matching Keys","description":"\u003cb\u003eGledewen locking fuel cap set replaces factory caps on many Freightliner trucks, offering a secure, OE-fit die-cast aluminum fuel cap with gasket, chain and four matching keys.\u003c\/b\u003e\n\n\u003cp\u003eIf you operate a Freightliner Cascadia, Columbia, Century, Coronado or M2-112 from the model years listed, this two-cap kit is built to be a straightforward, durable replacement for worn or missing locking fuel caps. Each kit contains two 3-inch locking caps sized to the filler neck outer diameter, rubber gasket seals, 13-inch safety chains with 6.5-inch bails, and four identical keys so both sides of the rig are keyed the same. The caps are intended for vented diesel tanks with thermal relief and use a push-and-twist engagement instead of threads.\u003c\/p\u003e\n\n\u003ch3\u003eWill these caps fit my Freightliner model?\u003c\/h3\u003e\n\u003cp\u003eYes — the Gledewen caps were made to match OE dimensions for a precise installation on the Freightliner models listed. They are a direct replacement for the push-and-twist style caps used on many Freightliner diesel rigs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include Cascadia 113\/125 (2008–2018), Columbia 112\/120 (2001–2016), Century 112\/120 (1996–2010), Coronado (2003–2022) and M2-112 (2005–2022).\u003c\/li\u003e\n  \u003cli\u003eDesigned for vented tanks with 220° thermal relief; not threaded caps.\u003c\/li\u003e\n  \u003cli\u003e3-inch measurement refers to outer diameter of the filler neck.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install these Gledewen locking fuel caps?\u003c\/h3\u003e\n\u003cp\u003eInstallation is simple and requires no special tools. Remove the old cap, confirm the keys operate correctly, insert the cap’s bar into the tank port and twist to engage. Verify the cap catches the port and tighten to seat the gasket against the filler neck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStep 1: Check keys work smoothly before installation.\u003c\/li\u003e\n  \u003cli\u003eStep 2: Remove old cap; insert new cap bar vertically into filler port.\u003c\/li\u003e\n  \u003cli\u003eStep 3: Push chain fully into the tank, pull cap outward to catch the port, then screw on until sealed.\u003c\/li\u003e\n  \u003cli\u003eStep 4: Keep keys in a safe location; two caps share four matching keys.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protections do these caps provide?\u003c\/h3\u003e\n\u003cp\u003eThe caps are constructed from heavy-duty die-cast aluminum to withstand daily use and resist corrosion better than lower-grade plastics. Each cap includes a molded rubber gasket for a secure seal and a safety chain to prevent loss while refueling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDie-cast aluminum body for long service life and impact resistance.\u003c\/li\u003e\n  \u003cli\u003eRubber gasket ensures a tight, fuel-resistant seal.\u003c\/li\u003e\n  \u003cli\u003e13-inch safety chain with 6.5-inch bail secures the cap during fueling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for?\u003c\/p\u003e\n\u003cp\u003eThis Gledewen locking fuel cap kit is aimed at owner-operators, fleet mechanics and maintenance teams who need a reliable, OEM-dimension replacement for Freightliner diesel trucks across multiple model years. It’s appropriate when original caps are lost, damaged or no longer seal properly and when you want both sides keyed identically for convenience. Note: intended for diesel applications and vented tanks with thermal relief; verify compatibility with your vehicle before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these caps compatible with threaded filler necks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These Gledewen caps are designed for vented tanks with 220° thermal relief and use a push-and-twist engagement, not threads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many keys are included and are they matched?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes four matching keys so both caps are keyed the same for convenient operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67585971781817,"sku":"B0BB7Q9ZY6","price":139.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-view-packed-caps.jpg?v=1790480494"},{"product_id":"gledewen-spare-tire-hoist-winch-for-rvs-trailers-trucks-46-cable-150-lb-capacity","title":"Gledewen Spare Tire Hoist Winch for RVs Trailers Trucks — 46\" Cable, 150 lb Capacity","description":"\u003cp\u003e\u003cstrong\u003eGledewen Spare Tire Hoist is a heavy-duty, bolt-on winch assembly that securely stores and lowers a spare tire for RVs, trailers, trucks, and motorhomes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a roadside flat happens, having the spare tire mounted and accessible saves time and effort. This Gledewen spare tire mount (replacement for LC159056 \/ 159056) is a compact, factory-direct winch assembly designed to bolt to a steel frame and lower a spare wheel on an offset cable. It’s built from thickened reinforced materials, rated for typical light-vehicle spares, and includes a long crank rod and 46\" cable for convenient operation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hoist attach to my RV or trailer?\u003c\/h3\u003e\n\u003cp\u003eThe unit is a universal, bolt-on winch style designed to fasten to steel frames under the vehicle. Installation requires aligning the mounting holes, bolting the assembly to the frame, and routing the cable through the tire center hole. Basic hand tools are sufficient and the typical install time is around 30 minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt-on design fits most steel frames used on RVs, trailers, trucks and motorhomes.\u003c\/li\u003e\n  \u003cli\u003eNo welding required—mount with standard bolts and hardware.\u003c\/li\u003e\n  \u003cli\u003eCrank-operated lift uses the included rod to raise and lower the tire.\u003c\/li\u003e\n  \u003cli\u003eManufacturer-recommended install typically takes about 30 minutes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat load and cable specs should I expect from this spare tire winch?\u003c\/h3\u003e\n\u003cp\u003eThis hoist uses a reinforced construction and corrosion-resistant finishes for longer life. It’s rated to safely support a spare up to 150 lbs and uses a 46\" offset cable suitable for most under-body tire placements. The design resists deformation and handles regular road vibrations reliably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe load capacity: 150 lbs (suitable for most passenger\/RV spare tires).\u003c\/li\u003e\n  \u003cli\u003eCable length: 46\" offset cable for undercarriage mounting.\u003c\/li\u003e\n  \u003cli\u003eThickened reinforcement improves tensile strength and resists rust.\u003c\/li\u003e\n  \u003cli\u003ePre-inspection by manufacturer for quality control before shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I operate and care for the winch safely?\u003c\/h3\u003e\n\u003cp\u003eOperation is manual: insert the crank rod and turn to raise or lower the tire. The winch is preset for safe handling—do not raise it before first use. When lowering, ensure the assembly is loaded; the winch requires weight to release properly. Avoid idling or letting the mechanism spin freely during descent to prevent jamming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not raise the winch before first use—the unit is factory set.\u003c\/li\u003e\n  \u003cli\u003eLower only when the assembly is loaded or pull down evenly by hand if unloaded.\u003c\/li\u003e\n  \u003cli\u003eAvoid letting the winch free-spin during descent to prevent jams.\u003c\/li\u003e\n  \u003cli\u003eRegularly inspect cable and attachment points for wear and corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen spare tire hoist is marketed for RVs, trailers, trucks and motorhomes and replaces OE numbers LC159056 and 159056. It’s a universal-style winch meant to match common spare wheel mounting arrangements used across light-commercial and recreational platforms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible vehicle types: RVs, trailers, trucks, motorhomes.\u003c\/li\u003e\n  \u003cli\u003eOE replacements: LC159056, 159056.\u003c\/li\u003e\n  \u003cli\u003eFactory-direct unit sold new with manufacturer inspections.\u003c\/li\u003e\n  \u003cli\u003ePacking includes one spare tire hoist assembly ready for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This spare tire winch is for owners of RVs, trailers, trucks or motorhomes who want a secure, easy-to-operate underbody spare storage solution without welding or complex fabrication. It suits DIY installers, fleet managers, and anyone seeking a cost-effective OEM-replacement winch that supports typical spare tires up to 150 lbs and provides a reliable, space-saving mounting method.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the load capacity of this spare tire hoist?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Gledewen winch supports up to 150 lbs, suitable for most passenger and RV spare tires.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require welding or special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No welding is required—bolt-on mounting uses standard hand tools and takes about 30 minutes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586217345209,"sku":"B0D11GRPC4","price":139.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-assembly-view.jpg?v=1790481030"},{"product_id":"gledewen-ficm-injector-wiring-harness-for-ford-6-0l-powerstroke-2003-2007-f250-f550-excursion-direct-fit-high-temp","title":"Gledewen FICM Injector Wiring Harness for Ford 6.0L Powerstroke 2003–2007 (F250–F550, Excursion) Direct-fit High-temp","description":"\u003cp\u003e\u003cstrong\u003eGledewen's FICM complete fuel injector wiring harness is a direct-fit replacement for Ford 6.0L Powerstroke trucks that restores reliable injector control and resists heat and corrosion.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your 2003–2007 Ford F250, F350, F450, F550 or 2004–2005 Excursion with the 6.0L Powerstroke is experiencing rough idle, misfires, intermittent injector faults or no-start conditions, a degraded FICM (fuel injector control module) harness can be the cause. This complete harness is built to OE form, fit and function, uses high-temperature wiring, and arrives wrapped for improved heat protection so you get a dependable electrical path for each injector without custom modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this harness match the original Ford wiring?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen harness follows OEM geometry and connector layouts so it installs like the factory part. Matching pin-outs and mounting points reduce installation time and avoid splicing or adapter use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design that aligns with factory brackets and clips\u003c\/li\u003e\n  \u003cli\u003eReplaces OE part numbers 5C3Z-9D930-A and 5C3Z9D930A\u003c\/li\u003e\n  \u003cli\u003eFactory-style connectors and correct pin assignments\u003c\/li\u003e\n  \u003cli\u003eMade to fit 2003–2007 6.0L Powerstroke trucks and 2004–2005 Excursions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protections improve durability?\u003c\/h3\u003e\n\u003cp\u003eThis harness uses high-temperature conductor wire and corrosion-resistant terminals to maintain conductivity under thermal and chemical stress. Exterior wrapping with PVC tubing and electrical tape provides additional abrasion and heat resistance in engine-bay conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature wire for stable conductivity at elevated engine temperatures\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant contacts to prevent voltage loss at injector pins\u003c\/li\u003e\n  \u003cli\u003ePVC tube and wrapped finish for abrasion and heat shielding\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand repeated vibration and under-hood contaminants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it resolve common injector-related drivability issues?\u003c\/h3\u003e\n\u003cp\u003eReplacing a cracked or damaged injector harness often cures intermittent misfires, rough idle, and startup failures caused by poor electrical connection to the injectors. While not a replacement for diagnosing other fuel or mechanical faults, it eliminates wiring as a common failure point.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTargets symptoms from broken insulation, frayed wires, or corroded terminals\u003c\/li\u003e\n  \u003cli\u003eRestores consistent injector pulse delivery to the injectors\u003c\/li\u003e\n  \u003cli\u003eSimplifies troubleshooting by ruling out wiring-related faults\u003c\/li\u003e\n  \u003cli\u003eCompatible with stock FICM and injector assemblies—no reprogramming required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the harness?\u003c\/h3\u003e\n\u003cp\u003eGledewen backs this complete injector harness with a 24-month warranty, giving you a defined period of protection against manufacturing defects. Customer support is available if you encounter fitment or performance questions during installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24-month warranty for replacement or refund on qualifying failures\u003c\/li\u003e\n  \u003cli\u003ePre-tested for continuity and durability before shipping\u003c\/li\u003e\n  \u003cli\u003eContactable support for fitment guidance and return service\u003c\/li\u003e\n  \u003cli\u003eClear OE cross-reference to ensure correct replacement selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This harness is intended for owners and technicians of 2003–2007 Ford F250\/F350\/F450\/F550 and 2004–2005 Excursion trucks equipped with the 6.0L Powerstroke who need a reliable, direct-fit replacement for a failing injector\/FICM wiring harness. If you want to avoid splicing factory wiring, install a part built to OE layout, and have a two-year warranty backing the repair, this Gledewen harness is engineered for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this harness fit my 2005 Ford F350 6.0L Powerstroke?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Gledewen harness is a direct replacement for 2003–2007 Ford F250\/F350\/F450\/F550 and 2004–2005 Excursion 6.0L Powerstroke models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers the injector wiring harness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Gledewen includes a 24-month warranty covering manufacturing defects, with replacement or refund options and customer support.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586383773881,"sku":"B07VJ3C8BQ","price":119.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-packaging-harness.jpg?v=1790482422"},{"product_id":"gledewen-fuel-lines-kit-for-1999-2003-chevrolet-silverado-gmc-sierra-v8-nylon-lines-2-filters","title":"Gledewen Fuel Lines Kit for 1999–2003 Chevrolet Silverado \u0026 GMC Sierra V8 — Nylon Lines, 2 Filters","description":"\u003cp\u003e\u003cstrong\u003eGledewen Fuel Lines Kit is a complete nylon replacement set that renews the fuel inlet, return and vapor lines for 1999–2003 Chevrolet Silverado and GMC Sierra trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your truck shows signs of fuel-line corrosion, hard-to-start behavior, or visible leaks under the chassis, this kit offers a direct-fit repair option built to replace original metal lines. The set includes main feed lines, a return line, a vapor line, two fuel filters and mounting zip ties, all designed as an aftermarket match to factory routing and connections for many 1999–2003 Silverado and Sierra V8 models.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit my Silverado or Sierra?\u003c\/h3\u003e\n\u003cp\u003eThis Gledewen kit matches many V8 configurations across model years 1999–2003 for Silverado and Sierra 1500\/2500\/3500 trucks. It covers common engine sizes like 4.8L, 5.3L, 6.0L and 8.1L but excludes Flex\/E85 conversions, 4.3L engines and some 3500 cab-chassis variants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with most 1999–2003 Chevrolet Silverado and GMC Sierra 1500\/2500\/3500 V8 models listed in the product details.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Flex (E85) fuel systems, 4.3L motors, or 3500 cab-chassis trucks.\u003c\/li\u003e\n  \u003cli\u003eIncludes part references FL-FG0053, FLFG0053, FG0053, and NFR0003 for cross-checking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and how do they replace factory parts?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies the main fuel supply line from tank to filter, the supply from filter to engine, a fuel return line, a vapor line, two replacement fuel filters and four zip ties for mounting. Each hose is made from durable nylon that resists corrosion and environmental wear, intended to replace aged metal lines that commonly fail by rusting or cracking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMain fuel line: tank to fuel filter and engine to filter runs.\u003c\/li\u003e\n  \u003cli\u003eFuel return and vapor lines for closed-loop routing and vapor recovery fitments.\u003c\/li\u003e\n  \u003cli\u003eTwo inline fuel filters included to refresh the filtration stage during installation.\u003c\/li\u003e\n  \u003cli\u003eZip ties provided to secure new lines along factory routing points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed as a like-for-like replacement to simplify installation and minimize modifications. Installation difficulty varies with access to the frame and tank area; a basic set of hand tools and vehicle lifts or ramps are typically sufficient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended tools: jack and stands or lift, pliers, hose clamp tool, basic socket set.\u003c\/li\u003e\n  \u003cli\u003eMost installations take a few hours for an experienced DIYer or a mechanic familiar with fuel-system work.\u003c\/li\u003e\n  \u003cli\u003eFollow safety steps: depressurize the fuel system, work in a ventilated area, and avoid open flames.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho should consider this kit: Owners restoring or maintaining 1999–2003 Chevrolet Silverado and GMC Sierra trucks with original metal fuel lines that show corrosion, leaks or degradation. It's also suitable for garages and mobile mechanics who prefer a full-line replacement kit to avoid part mismatches during a fuel-line repair. If your truck uses a Flex\/E85 system, has a 4.3L engine or is a 3500 cab-chassis variant, consult your dealer or parts specialist before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product is intended to replace worn or rusted fuel lines with aftermarket nylon lines; it is not a performance modification and does not change engine calibration. Use the listed OE numbers and vehicle compatibility to verify fitment before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include fuel filters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the set includes two inline fuel filters to replace the original filtration during installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on Flex (E85) trucks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this kit is not compatible with Flex\/E85 fuel systems or 4.3L engines and some 3500 chassis trucks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586463432889,"sku":"B0F21X1MF3","price":125.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-packaging-fuel-lines-kit.jpg?v=1790484114"},{"product_id":"gledewen-fuel-line-kit-for-1988-1997-gm-trucks-chevy-c-k-1500-3500-complete-nylon-replacement","title":"Gledewen Fuel Line Kit for 1988–1997 GM Trucks — Chevy C\/K 1500-3500, Complete Nylon Replacement","description":"\u003cstrong\u003eGledewen Fuel Line Kit is a complete nylon replacement kit designed to restore fuel supply, return, and vapor lines on 1988–1997 GM gas trucks for safer, leak-free operation.\u003c\/strong\u003e\n\n\u003cp\u003eOver time factory steel fuel lines corrode, crack, or clog, which can cause drivability issues and safety risks. This kit from Gledewen includes fuel supply and return lines, a vapor emission line, fittings, a fuel filter, pinch clamps, and zip ties—everything needed to replace worn lines without dropping the gas tank. The components are nylon-based to resist rust and environmental damage and match OE routing and connections for a precise fit.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit my 1988–1997 Chevrolet or GMC truck?\u003c\/h3\u003e\n\u003cp\u003eThis kit is engineered to be compatible with gas-engine models in the 1988–1997 Chevy and GMC truck families. It covers C\/K 1500, 2500, 3500 models and select SUVs that share the same fuel plumbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Chevrolet C1500, C2500, C3500, K1500, K2500, K3500 (1988–1997) — gas only.\u003c\/li\u003e\n  \u003cli\u003eFits GMC C3500 and K3500 (1988–1997) — gas only; also suits Tahoe, Yukon, Suburban, Silverado variants with matching lines.\u003c\/li\u003e\n  \u003cli\u003eMatches OE part numbers: NFR0013, GM23B, FL-GM22B, FL-GM22B-T, FLGM22B, FLGM22BT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation work and can I do it myself?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for a straightforward install that avoids removing the fuel tank or original hard line in most cases. Basic automotive tools and intermediate mechanical skill are required; however, professional installation is recommended if you are not comfortable working under the vehicle or handling fuel-system components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDoes not typically require fuel tank removal—saves time and complexity.\u003c\/li\u003e\n  \u003cli\u003eIncludes nylon-to-injector and hose-barb-to-quick-disconnect fittings for direct connection.\u003c\/li\u003e\n  \u003cli\u003eComes with pinch clamps and zip ties so you can secure routing to original clips and brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and performance benefits does this kit offer?\u003c\/h3\u003e\n\u003cp\u003eGledewen uses durable nylon hose that resists corrosion, rot, and cracking that commonly affect steel lines over decades of use. The included fuel filter and OEM-matching fittings help maintain consistent flow and cleaner fuel delivery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNylon construction resists salt, dirt, and moisture better than factory steel lines.\u003c\/li\u003e\n  \u003cli\u003ePre-sized lines for accurate fit and reduced risk of kinks or rubbing.\u003c\/li\u003e\n  \u003cli\u003eIncludes multi-inspected components and a 36-month warranty for added confidence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly is included in the packing list?\u003c\/h3\u003e\n\u003cp\u003eThe kit is comprehensive—designed to replace the common failure points in the fuel plumbing of older GM trucks without hunting for additional parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × fuel supply line (tank to filter)\u003c\/li\u003e\n  \u003cli\u003e1 × fuel return line (tank to front engine flex line)\u003c\/li\u003e\n  \u003cli\u003e1 × vapor emission line (tank to charcoal canister)\u003c\/li\u003e\n  \u003cli\u003e1 × nylon-to-injector \u0026amp; hose-barb-to-quick-disconnect fittings\u003c\/li\u003e\n  \u003cli\u003e1 × fuel filter, plus pinch clamps and zip ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Gledewen Fuel Line Kit is intended for owners and mechanics restoring or maintaining 1988–1997 Chevrolet and GMC gas trucks—especially C\/K series and common SUVs—who want a rust-resistant, OE-matching replacement without the expense of custom hose fabrication. If your truck shows signs of fuel line corrosion, leaks, poor idling, or fuel odor, this kit provides the parts to return the system to reliable operation; consider professional installation for safety and correct routing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit 1995 Chevy Silverado gas models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your Silverado shares the 1988–1997 C\/K gas truck fuel plumbing, this kit fits. Confirm the OE part numbers listed to be sure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the kit myself without dropping the gas tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Often yes—this kit is designed to avoid tank removal, but professional installation is recommended if you're inexperienced with fuel systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586463563961,"sku":"B0D763Q243","price":148.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-fuel-line-kit-front-packaging.jpg?v=1790484113"},{"product_id":"gledewen-trailer-tailgate-lift-assist-replacement-springs-kit-2pcs-heavy-duty-steel-adjustable-tension","title":"Gledewen Trailer Tailgate Lift Assist Replacement Springs Kit (2PCS), Heavy-Duty Steel, Adjustable Tension","description":"\u003cp\u003e\u003cstrong\u003eThe Gledewen Trailer Tailgate Lift Assist Replacement Spring kit (2PCS) replaces worn lift springs and cable assemblies to make opening and closing a trailer tailgate far easier and safer.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your trailer tailgate or ramp feels heavy or unpredictable, this replacement kit restores the spring-loaded assist that takes most of the gate's weight off your hands. The package contains two complete spring, cable and chain assemblies engineered to match common tailgate lift assist systems. It fits kits designed for trailer gates and ramps with a maximum assisted weight up to 400 pounds and installs on the trailer side rail to re-balance the hinge tension.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this replacement spring restore ease of use?\u003c\/h3\u003e\n\u003cp\u003eInstalling the Gledewen replacement springs returns the counterbalancing action lost when original springs corrode, stretch, or break. The double-spring assembly provides a progressive lift so the gate moves smoothly instead of dropping or sticking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes two spring, cable and chain assemblies for paired or dual-side systems.\u003c\/li\u003e\n  \u003cli\u003eDouble-spring design: smaller inner spring nested in larger outer spring for staged tension.\u003c\/li\u003e\n  \u003cli\u003eRestores near-OEM lift feel at a lower cost than full kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eMost users can fit the assemblies in about 30 minutes using basic hand tools; the kit is built for straightforward replacement so you don't need specialized equipment. Clear instructions and common mounting points make it a practical DIY task for a homeowner or professional mechanic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated install time: ~30 minutes for one side when replacing in pairs.\u003c\/li\u003e\n  \u003cli\u003eTypical tools: wrenches, pliers, socket set and safety gloves.\u003c\/li\u003e\n  \u003cli\u003eMounts to trailer side rail and attaches to tailgate hinge chain or anchor point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and performance features to expect?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies are constructed from heavy-gauge steel and finished to resist corrosion and wear in outdoor conditions. The lifting force is adjustable so you can fine-tune tension based on the tailgate or ramp weight and usage frequency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty steel construction for longer service life.\u003c\/li\u003e\n  \u003cli\u003eAdjustable lifting tension to suit different gate weights up to 400 lbs.\u003c\/li\u003e\n  \u003cli\u003eCable travel allows up to four feet of movement to accommodate varied gate designs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the purchase?\u003c\/h3\u003e\n\u003cp\u003eGledewen backs the repair kit with a 36-month warranty to protect against manufacturing defects and premature failure. Customer support is available through the original sales channel for troubleshooting or replacement claims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e36-month limited warranty covering functional failure.\u003c\/li\u003e\n  \u003cli\u003eDirect seller support via the point of purchase for warranty service.\u003c\/li\u003e\n  \u003cli\u003eReplacement kit offers cost savings compared with buying a full OEM lift assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Gledewen Trailer Tailgate Lift Assist Replacement Spring kit is ideal for trailer owners, fleet managers, landscapers, and weekend DIYers who need an affordable, durable solution to restore tailgate assist. If your tailgate feels heavy, drops too quickly, or the original springs are corroded or broken, this kit gives you a reliable replacement that’s easy to fit and adjustable to match your trailer’s lift requirements. It’s not a medical device; it’s a mechanical replacement component intended to reduce the manual effort required to lift or lower a trailer gate within the rated weight limit.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my trailer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits most trailer tailgate lift assist systems that accept spring, cable and chain assemblies; max assisted gate weight is 400 pounds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typical install time is about 30 minutes per side using basic hand tools and following mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586465726649,"sku":"B0BGBV281S","price":179.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-packaging.jpg?v=1790484156"},{"product_id":"gledewen-front-door-handle-kit-for-1988-1994-chevy-gmc-complete-oem-style-set-with-interior-exterior-handles-locks-and-keys","title":"Gledewen Front Door Handle Kit for 1988–1994 Chevy \u0026 GMC — Complete OEM-style set with interior\/exterior handles, locks and keys","description":"\u003cp\u003e\u003cstrong\u003eComplete front door handle kit for 1988–1994 Chevrolet and GMC trucks and SUVs — includes left\/right interior and exterior handles, two lock cylinders and two keys for a direct OEM-style replacement.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your front door handles are worn, loose, or the locks no longer work, this Gledewen replacement kit restores function and appearance to compatible Chevy and GMC models from late 1980s to mid-1990s. The set is new and designed to match factory fit and operation: two exterior metal-lever handles (left driver and right passenger), two chrome interior levers with black bezels, two lock cylinders and two keys. OE part numbers are listed so you can confirm exact fit before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and years does this handle set fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit covers a broad range of Chevrolet and GMC pickups, Suburbans, Blazers and Yukons built between 1988 and 1994. Verify your vehicle's year, make and model against the compatibility list and cross-check OE numbers to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Blazer (1992–1994), C1500\/C2500\/C3500 and K-series pickups and Suburbans (1988–1994, model-dependent)\u003c\/li\u003e\n  \u003cli\u003eGMC: C1500\/C2500\/C3500 and K-series pickups, Suburbans and 1992–1994 Yukon\u003c\/li\u003e\n  \u003cli\u003eIncluded OE and GM numbers in the description for precise matching\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check first?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the original mounting points and linkages, so it’s a straightforward swap for anyone comfortable with basic door panel removal and reassembly. Check the listed OE part numbers and your vehicle’s door linkages before beginning to avoid surprises.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare the provided OE\/GM numbers to your existing parts\u003c\/li\u003e\n  \u003cli\u003eInspect door latch and linkage for wear before installing new handles\u003c\/li\u003e\n  \u003cli\u003eTypical tools: screwdriver set, socket set, and trim removal tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included in the kit and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eThe pack contains one exterior left driver handle and one exterior right passenger handle (metal levers), matching interior chrome levers with black bezels for both sides, two lock cylinders and two keys. Materials and finishing are chosen to mimic factory durability and appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 exterior metal-lever door handles (left and right)\u003c\/li\u003e\n  \u003cli\u003e2 interior chrome lever handles with black bezels\u003c\/li\u003e\n  \u003cli\u003e2 lock cylinders and 2 matching keys included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances come with this Gledewen kit?\u003c\/h3\u003e\n\u003cp\u003eGledewen provides a 24-month warranty on defects in materials and workmanship. The kit undergoes quality control checks and is offered with seller support for any fitment or performance concerns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-year warranty against defects\u003c\/li\u003e\n  \u003cli\u003eQuality inspections to meet OEM-style operation\u003c\/li\u003e\n  \u003cli\u003eSeller support for fit or installation questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This door-handle set is aimed at owners and restorers of 1988–1994 Chevrolet and GMC trucks and SUVs who need a complete front-door replacement that matches original appearance and function. It’s ideal for DIY mechanics, professional technicians, and restoration projects where matching OE fitment and having locks and keys included matter. Before purchasing, confirm your vehicle year\/make\/model and match OE numbers provided to guarantee compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 1990 Chevy C1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the set lists 1988–1994 C1500 pickup compatibility; confirm by matching OE numbers in the description.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are keys included with the locks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — two lock cylinders and two matching keys are included for both front doors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586469888185,"sku":"B0FFM9WK58","price":131.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-exterior-handle-left.jpg?v=1790484238"},{"product_id":"gledewen-tailgate-handle-kit-for-1999-2006-chevy-silverado-gmc-sierra-complete-oem-style-rust-resistant-assembly","title":"Gledewen Tailgate Handle Kit for 1999–2006 Chevy Silverado \u0026 GMC Sierra — Complete OEM-style, Rust-Resistant Assembly","description":"\u003cp\u003e\u003cstrong\u003eThis Gledewen Tailgate Latch Handle Kit replaces worn or broken rear tailgate handles on compatible 1999–2007 Chevrolet Silverado and GMC Sierra trucks with an OEM-style, rust-resistant assembly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pickup's tailgate handle is cracked, loose, or no longer latching properly, this complete replacement kit from Gledewen gives you the parts needed to restore smooth opening and secure closing. The kit includes the handle, frame, gaskets, bolts and linkage pieces designed to match factory fit and restore reliable operation without major modification.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit my Silverado or Sierra?\u003c\/h3\u003e\n\u003cp\u003eThis kit is built to match the original equipment geometry for many Chevy and GMC full-size trucks from the late 1990s through the mid-2000s. Verify fit by matching your truck model year and cab\/bed variant with the listed compatibilities before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovers Chevrolet Silverado 1500, 2500, 3500 model years 1999–2006 and certain 2007 Classics\u003c\/li\u003e\n  \u003cli\u003eFits GMC Sierra 1500, 2500, 3500 for the same year ranges and Classic trims\u003c\/li\u003e\n  \u003cli\u003eCompatible with both standard and HD tailgate configurations referenced in the compatibility list\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how complete is the kit?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen kit ships as a full tailgate latch handle assembly so you won’t need to scavenge parts from the old handle. It bundles the exterior handle with mounting hardware and the linkage pieces required for installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 rear tailgate handle and 1 mounting frame for a direct replacement\u003c\/li\u003e\n  \u003cli\u003e2 gasket seals, 4 bolts, 2 nuts, 4 hinge components and 2 plastic linkage rods\u003c\/li\u003e\n  \u003cli\u003eIncludes two lock blocks and all required fasteners to secure the assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the replacement and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eThis replacement is engineered to withstand typical exposure to road elements by combining metal housing with durable plastic clips and sealing gaskets. The materials aim to resist rust and maintain latch function for years of regular use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRust-resistant metal housing for the handle and frame\u003c\/li\u003e\n  \u003cli\u003eDurable plastic rod clips that retain linkage under repeated cycles\u003c\/li\u003e\n  \u003cli\u003eGaskets to help seal the opening against moisture and debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the installation and does it match OEM part numbers?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with tailgate hardware: remove the old assembly, transfer if needed, and bolt the new kit into place. The kit replaces many common GM part numbers to simplify ordering the correct item for your truck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design follows factory mounting points to minimize drilling or modification\u003c\/li\u003e\n  \u003cli\u003eListed to replace multiple GM OE numbers for cross-reference convenience\u003c\/li\u003e\n  \u003cli\u003eComes with all fasteners and components needed for a single-handle replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Gledewen Tailgate Latch Handle Kit is suited for owners of Chevrolet Silverado or GMC Sierra trucks from the specified year ranges who need a full, OEM-style replacement—whether restoring a daily driver, prepping a work truck, or maintaining a weekend hauler. It’s aimed at DIY mechanics and professional installers who want a complete, corrosion-resistant assembly with the hardware included.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include all mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes the handle, frame, gaskets, bolts, nuts, hinge pieces, linkage rods and lock blocks for a complete installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this myself without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most owners can install it with basic hand tools; no specialty equipment is required for a standard tailgate replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586474803385,"sku":"B08YF6FD4F","price":125.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-tailgate-handle-front-view.jpg?v=1790484342"},{"product_id":"gledewen-center-console-lid-replacement-for-gmc-acadia-chevy-traverse-gray-armrest-cover-with-clips-oem-fit-soft-close","title":"Gledewen Center Console Lid Replacement for GMC Acadia \/ Chevy Traverse — Gray Armrest Cover with Clips, OEM Fit \u0026 Soft-Close","description":"\u003cp\u003e\u003cstrong\u003eGledewen center console lid replacement restores the armrest cover and hinge assembly for compatible GMC Acadia, Chevy Traverse, Buick Enclave and Saturn Outlook models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the original console lid in your vehicle is cracked, worn or no longer closes quietly, swapping in a new Gledewen lid returns proper fit, function and appearance. This aftermarket armrest cap assembly is made to match OEM dimensions and includes the cover plate plus mounting clips, allowing a straightforward replacement without specialty tools. The part is sold new from the factory and is offered with a 24-month warranty.\u003c\/p\u003e\n\n\u003ch3\u003eWill this lid fit my specific vehicle year and model?\u003c\/h3\u003e\n\u003cp\u003eYes — the Gledewen center console lid is designed for a set of GM mid-size SUVs and crossovers. Confirm compatibility by checking your vehicle year and OEM part numbers before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: 2008–2017 Chevrolet Traverse, 2007–2016 GMC Acadia, 2017 GMC Acadia Limited\u003c\/li\u003e\n  \u003cli\u003eAlso fits: 2008–2017 Buick Enclave and 2007–2010 Saturn Outlook\u003c\/li\u003e\n  \u003cli\u003eDirect-fit part numbers: 22905366, 925-088, 925088\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be quick and straightforward — most owners can complete the swap in about 15 minutes. The lid is produced to OEM dimensions so it lines up with the existing hinge and mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes one center console lid with cover plate (gray) and four mounting clips\u003c\/li\u003e\n  \u003cli\u003eNo special tools required; basic screwdriver or trim tool recommended\u003c\/li\u003e\n  \u003cli\u003eDesigned for drop-in alignment with factory screw\/clip locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat improvements or features does this replacement provide?\u003c\/h3\u003e\n\u003cp\u003eThe replacement lid focuses on restoring durability, quiet operation and passenger comfort compared with a worn original. Materials and fitment are chosen to reduce rattles and provide consistent support.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets or exceeds OEM fit standards and factory inspection checks\u003c\/li\u003e\n  \u003cli\u003eSoft-close design to minimize lid rattling and slapping during driving\u003c\/li\u003e\n  \u003cli\u003eMemory-foam style padding and height engineered for arm support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and after-sales support are available?\u003c\/h3\u003e\n\u003cp\u003eGledewen offers coverage to help ensure satisfaction after purchase. If the component arrives damaged or performs unexpectedly, there are options for replacement or refund within the stated period.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24-month warranty for replacement or refund through seller contact\u003c\/li\u003e\n  \u003cli\u003eFactory-direct seller — new part packaged with clips included\u003c\/li\u003e\n  \u003cli\u003eCustomer service via the platform messaging system for claims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who own one of the compatible GM models and need a cost-effective, direct-fit replacement for a cracked, sagging or noisy center console armrest. It's aimed at DIY owners and technicians who prefer an OEM-matching part that installs quickly and restores both utility and cabin appearance without a full console replacement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this lid require any modification to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modifications are required; it uses existing mounting points and included clips for a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What if the part doesn't fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Contact the seller through the platform for replacement or refund under the 24-month warranty if compatibility issues occur.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586521465017,"sku":"B0F1F22CPN","price":119.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-view-center-console-lid.jpg?v=1790485556"},{"product_id":"gledewen-center-console-lid-for-2008-2017-chevy-traverse-black-ebony-oem-fit-with-memory-foam-mounting-clips","title":"Gledewen Center Console Lid for 2008–2017 Chevy Traverse — Black\/Ebony, OEM-fit with Memory-Foam \u0026 Mounting Clips","description":"\u003cp\u003e\u003cstrong\u003eThis Gledewen center console lid replaces worn or broken armrest covers for select Chevy, GMC, Buick and Saturn SUVs, restoring fit, comfort and appearance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your factory console armrest is cracked, sagging, or noisy, swapping in a brand-new replacement lid is an inexpensive way to recover the original look and function. This Gledewen part is made to match OEM dimensions and finishes, ships with the mounting clips, and fits multiple GM crossover models from late-2000s to mid-2010s. It’s supplied in black\/ebony and is offered direct from the factory to keep cost low while ensuring quality-tested components.\u003c\/p\u003e\n\n\u003ch3\u003eWill this lid fit my vehicle model and year?\u003c\/h3\u003e\n\u003cp\u003eYes — the lid was designed specifically for a group of GM crossovers. Verify fit by comparing the part numbers or your vehicle year and model before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: 2008–2017 Chevrolet Traverse.\u003c\/li\u003e\n  \u003cli\u003eAlso fits: 2007–2016 GMC Acadia and 2017 GMC Acadia Limited.\u003c\/li\u003e\n  \u003cli\u003eFits Buick Enclave 2008–2017 and Saturn Outlook 2007–2010.\u003c\/li\u003e\n  \u003cli\u003eOEM reference numbers: 22905370 and 925-084 for cross-checking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and meant to be a quick do-it-yourself task. The lid follows OEM shape and mounting points, so no custom trimming or special tools are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 1 center console lid with cover plate (black\/ebony) and 4 clips.\u003c\/li\u003e\n  \u003cli\u003eEstimated time: roughly 15 minutes for removal and replacement.\u003c\/li\u003e\n  \u003cli\u003eMounting: designed to align with factory holes and latch mechanisms.\u003c\/li\u003e\n  \u003cli\u003eTools: basic hand tools only if clips are tight or hidden trim needs prying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials, comfort features and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe replacement lid uses durable materials chosen to match OEM feel and longevity. A soft memory-foam layer improves arm support while resisting premature deformation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction: factory-tested assembly to meet or exceed OEM standards.\u003c\/li\u003e\n  \u003cli\u003eComfort: soft memory foam padding reduces arm fatigue on longer drives.\u003c\/li\u003e\n  \u003cli\u003eNoise control: soft-close fit and secure clips minimize rattles.\u003c\/li\u003e\n  \u003cli\u003eFinish: black\/ebony cover plate matches original interior tones.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who own a compatible Chevrolet Traverse, GMC Acadia (including 2017 Limited), Buick Enclave, or Saturn Outlook and want an affordable OEM-style repair. It’s ideal for owners restoring interior appearance, eliminating squeaks, or replacing a cracked\/sunken armrest without paying dealer prices. Because it ships from the factory with mounting clips and a clear OEM cross-reference, it suits DIY installers and repair shops that need a reliable, cost-effective replacement part backed by a 24-month warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this lid come with the mounting clips?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes one center console lid and four clips for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What years and models does this replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits 2008–2017 Chevy Traverse; 2007–2016 GMC Acadia and 2017 Acadia Limited; 2008–2017 Buick Enclave; 2007–2010 Saturn Outlook.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586525626553,"sku":"B0F1F37LP7","price":119.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-center-console-lid-front-view.jpg?v=1790485752"},{"product_id":"gledewen-steering-column-lower-intermediate-shaft-with-needle-bearing-u-joint-fits-2009-2014-ford-f-150-2007-2014-expedition","title":"Gledewen Steering Column Lower Intermediate Shaft with Needle-Bearing U-Joint — Fits 2009–2014 Ford F-150, 2007–2014 Expedition \u0026","description":"\u003cp\u003e\u003cstrong\u003eGledewen’s lower intermediate steering shaft with a U-joint is a direct-fit replacement designed to restore smooth, reliable steering for compatible Ford and Lincoln trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement steering column lower intermediate shaft is engineered to match OEM dimensions and function, giving your vehicle the feel of a factory-installed part. It replaces part numbers 8L1Z-3B676-A and 8L1Z3B676A and fits 2009–2014 Ford F-150 pickups, 2007–2014 Ford Expeditions, and 2007–2014 Lincoln Navigators. Built from surface-treated, reinforced steel and fitted with precision needle-bearing U-joints, the unit targets common symptoms like binding, clunking, or uneven steering response.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this shaft improve steering feel and reliability?\u003c\/h3\u003e\n\n\u003cp\u003eThe shaft restores proper alignment and rotational smoothness between the steering column and the steering gearbox or rack. Its needle-bearing U-joint reduces play and unwanted vibration, while the reinforced steel body resists flex that can cause sloppy steering. Together these features reduce noise and improve steering feedback.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrecision needle-bearing U-joint reduces endplay and vibration.\u003c\/li\u003e\n  \u003cli\u003eSurface-treated reinforced steel resists corrosion and bending.\u003c\/li\u003e\n  \u003cli\u003eManufactured to OE specifications for direct-fit installation.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part numbers 8L1Z-3B676-A \/ 8L1Z3B676A to ensure compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my vehicle and how do I confirm compatibility?\u003c\/h3\u003e\n\n\u003cp\u003eThe Gledewen intermediate shaft fits specific Ford and Lincoln models from the stated years. To confirm fitment, compare your existing part number to the replacement numbers listed or check the vehicle model years supported. If your OEM part matches 8L1Z-3B676-A or 8L1Z3B676A, this assembly is intended as a direct substitute.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits 2009–2014 Ford F-150 pickups.\u003c\/li\u003e\n  \u003cli\u003eFits 2007–2014 Ford Expedition SUVs.\u003c\/li\u003e\n  \u003cli\u003eFits 2007–2014 Lincoln Navigator models.\u003c\/li\u003e\n  \u003cli\u003eCross-check with OEM numbers 8L1Z-3B676-A and 8L1Z3B676A before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and warranty details?\u003c\/h3\u003e\n\n\u003cp\u003eThis intermediate shaft is constructed for longevity using surface-treated steel to fight corrosion and wear. The U-joints use precision-engineered needle bearings to maintain consistent operation over time. Gledewen supports the part with a 12-month warranty covering failures or defects under normal use, with replacement or refund options available.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSurface-treated reinforcement for improved corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eNeedle-bearing U-joints engineered for smoother rotation.\u003c\/li\u003e\n  \u003cli\u003eTested for long-term dependability and structural rigidity.\u003c\/li\u003e\n  \u003cli\u003e12-month limited warranty with replacement or refund service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation requires basic mechanical skills and standard tools; it's typically a straightforward replacement when matched to the correct vehicle. Expect to remove the old intermediate shaft, align splines, and torque fasteners to factory specifications. If you’re unfamiliar with steering components, a professional installation is recommended to ensure safety and proper steering alignment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design reduces modification or machining needs.\u003c\/li\u003e\n  \u003cli\u003eFollow factory torque specs and alignment checks after installation.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if unsure about steering system work.\u003c\/li\u003e\n  \u003cli\u003eInspect for steering play or binding before and after replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Owners and DIY mechanics of 2009–2014 Ford F-150 pickups, 2007–2014 Ford Expeditions, and 2007–2014 Lincoln Navigators who need a dependable OEM-spec replacement for a worn or noisy lower steering intermediate shaft. It’s also suitable for repair shops seeking a quality aftermarket option that matches factory fit and function while backed by a 12-month warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace part number 8L1Z-3B676-A?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this Gledewen shaft is a direct replacement for 8L1Z-3B676-A and 8L1Z3B676A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is professional installation required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Not strictly, but professional installation is recommended if you lack steering-system experience.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586538012857,"sku":"B07VFZ7K5J","price":133.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-view-intermediate-shaft.jpg?v=1790486312"},{"product_id":"gledewen-rear-right-cargo-door-handle-for-1996-2015-chevy-express-gmc-savana-textured-black-with-license-bracket-and-keyhole","title":"Gledewen Rear Right Cargo Door Handle for 1996-2015 Chevy Express \u0026 GMC Savana — Textured Black with License Bracket and Keyhole","description":"\u003cp\u003e\u003cstrong\u003eGledewen exterior rear right cargo door handle — a direct-fit, textured-black replacement assembly with license plate bracket and keyhole for 1996–2015 Chevy Express and GMC Savana vans.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty rear right cargo door handle restores secure, smooth opening and locking to older Chevrolet Express and GMC Savana vans without the cost of an original equipment part. Designed to match factory dimensions and operation, the Gledewen handle includes a textured black finish, an integrated license plate bracket and a keyhole for manual access. It’s a new aftermarket assembly that replaces worn or broken stock handles and ships ready to install.\u003c\/p\u003e\n\n\u003ch3\u003eWill this handle fit my 1996–2015 Chevy Express or GMC Savana van?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the Gledewen rear right cargo door handle is built to match the factory mounting points and functional layout for the listed model years. It’s a direct OE-style replacement intended for the passenger-side rear cargo door and works with the standard latch and lock mechanisms used across these vans.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Chevrolet Express 1500 \/ 2500 \/ 3500 (1996–2015).\u003c\/li\u003e\n  \u003cli\u003eCompatible with GMC Savana 1500 \/ 2500 \/ 3500 (1996–2015).\u003c\/li\u003e\n  \u003cli\u003eReplaces OE part numbers: 25989400, 15167638, 15269298, 23489985, 25866289, GM1820106, 11466884.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools will I need?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic automotive tasks; most owners can complete it in about 15 minutes without modifying the vehicle. The handle mounts to existing holes and connects to the stock lock linkage and latch, so you only need common hand tools and possibly a trim remover to access the assembly area.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical tools: socket set, screwdriver, pliers, trim removal tool.\u003c\/li\u003e\n  \u003cli\u003eNo cutting, drilling, or special adapters required — direct-fit replacement.\u003c\/li\u003e\n  \u003cli\u003eWorks with existing lock cylinder and linkage; includes license bracket and keyhole.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and quality can I expect from this Gledewen replacement?\u003c\/h3\u003e\n\n\u003cp\u003eThe handle is manufactured from durable materials engineered to withstand repeated use and outdoor exposure. Gledewen subjects the assembly to quality checks to ensure reliable operation and fitment comparable to OEM, at a lower price point.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTextured black finish resists scratches and conceals wear.\u003c\/li\u003e\n  \u003cli\u003eSturdy housing and reinforced mounting points for long service life.\u003c\/li\u003e\n  \u003cli\u003eIncludes integrated license plate bracket and keyed access for security.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the Gledewen handle come with warranty or customer support?\u003c\/h3\u003e\n\n\u003cp\u003eYes — this replacement handle is backed by a 24-month warranty that covers defects or failure under normal use. Gledewen also offers customer support through the seller platform for any fitment or performance questions after purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-year limited warranty against defects and premature failure.\u003c\/li\u003e\n  \u003cli\u003eSeller contact available for installation help or returns.\u003c\/li\u003e\n  \u003cli\u003eDesigned and tested to meet factory operating parameters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Fleet managers, mechanics and owners of Chevrolet Express and GMC Savana vans who need an affordable, reliable replacement for a worn or broken rear right cargo door handle. If you want a part that installs quickly, fits like the original, and includes a license plate bracket and keyhole, the Gledewen assembly is a practical choice to restore daily function and security without expensive dealer pricing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this handle a direct replacement for OEM parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It matches factory mounting points and replaces listed OE numbers for direct-fit installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the handle come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Gledewen offers a 24-month warranty covering defects and performance issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586629468345,"sku":"B0BR9WRZ5W","price":137.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-handle-front-assembly.jpg?v=1790488481"},{"product_id":"gledewen-spare-tire-winch-carrier-for-1999-2007-ford-f250-f350-f450-f550-direct-fit-oe-replacement-reinforced-steel","title":"Gledewen Spare Tire Winch Carrier for 1999-2007 Ford F250 F350 F450 F550 — Direct-Fit OE Replacement, Reinforced Steel","description":"\u003cp\u003e\u003cstrong\u003eGledewen's spare tire winch carrier is a direct-fit replacement hoist that restores reliable lowering and raising of the underbody spare on 1999–2007 Ford Super Duty trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty spare tire hoist is built to the original equipment (OE) specifications to give your F250, F350, F450 or F550 the same secure and easy-to-operate spare tire retrieval as the factory unit. Constructed from surface-treated reinforced steel with corrosion-resistant finishes, the Gledewen winch carrier is designed to match fitment numbers used by Ford and to replace common OEM part numbers so installation is straightforward and dependable.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this winch carrier match my truck’s original unit?\u003c\/h3\u003e\n\n\u003cp\u003eThe Gledewen hoist mirrors the original geometry and mounting points so it mates with existing brackets and the spare cable assembly. It’s manufactured to OE-style tolerances for a factory-like appearance and operation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for 1999–2007 Ford F250, F350, F450, F550 models\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers including 924-528, 6C3Z1A131AA and others\u003c\/li\u003e\n  \u003cli\u003eMounting holes and latch interfaces engineered to original specs\u003c\/li\u003e\n  \u003cli\u003eImproved secondary-latch design for easier spare removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part hold up to road salt and regular use?\u003c\/h3\u003e\n\n\u003cp\u003eDurability is a priority: the carrier is formed from reinforced steel and receives surface treatments to help resist corrosion and wear from road conditions. That construction helps the hoist resist bending, rusting, and seizing when exposed to salt, mud, and moisture.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReinforced steel construction for structural strength\u003c\/li\u003e\n  \u003cli\u003eSurface-treated finish to reduce rust and extend service life\u003c\/li\u003e\n  \u003cli\u003eTested for rigidity and endurance under typical use cycles\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain reliable operation over years of use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools will I need?\u003c\/h3\u003e\n\n\u003cp\u003eBecause this hoist follows OE dimensions and bolt patterns, installation is generally straightforward and can be completed with common hand tools. Many owners report swapping the carrier in minutes, but time can vary if cable or related hardware needs replacing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStandard wrench\/sockets for existing mounting bolts\u003c\/li\u003e\n  \u003cli\u003eNo special fabrication required—bolt-on replacement\u003c\/li\u003e\n  \u003cli\u003eWorks with original spare cable and bracket assemblies in most cases\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle service manual torque specs for secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the winch carrier?\u003c\/h3\u003e\n\n\u003cp\u003eGledewen backs this spare tire carrier with a 12-month warranty covering defects and fitment issues. If you encounter problems during installation or operation, the brand offers replacement or refund options to ensure satisfaction.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty for parts and workmanship\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for fitment or replacement questions\u003c\/li\u003e\n  \u003cli\u003eReturn or replacement policies for qualifying issues\u003c\/li\u003e\n  \u003cli\u003eComes packaged to protect the finish during shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Truck owners and fleet managers who drive 1999–2007 Ford Super Duty models and need a reliable, OEM-style spare tire lowering system. If your current hoist is bent, corroded, seized, or missing, this Gledewen replacement provides a durable, direct-fit solution engineered to restore safe and convenient spare tire access without extensive modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Ford models does this winch carrier fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits 1999–2007 Ford F250, F350, F450, and F550 Super Duty trucks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace my original OEM part number?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it replaces common OEM numbers like 924-528, 6C3Z1A131AA and others.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586703950009,"sku":"B07S35FFHZ","price":138.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-view-winCarrier.jpg?v=1790490667"},{"product_id":"gledewen-sliding-door-cable-assembly-for-toyota-sienna-2004-2010-rear-right-oem-fit-replacement-for-3-3l-3-5l-no-motor","title":"Gledewen Sliding Door Cable Assembly for Toyota Sienna 2004–2010 — Rear Right OEM-Fit Replacement for 3.3L\/3.5L (No Motor)","description":"\u003cstrong\u003eGledewen Sliding Door Cable Assembly replaces the worn or broken cable mechanism on the rear right power sliding door of 2004–2010 Toyota Sienna V6 models, restoring smooth, reliable operation.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Sienna's passenger-side power sliding door hesitates, jams, or won't move at all, a fatigued cable assembly is a common cause. This complete rear right cable system from Gledewen is a factory-direct replacement built to match the original dimensions and mounting points for a straightforward swap. It arrives new, without a motor, and includes installation instructions so you or a technician can reinstall the door drive assembly with confidence.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cable assembly restore my sliding door's performance?\u003c\/h3\u003e\n\u003cp\u003eThe assembly transfers the motor's motion to the door via a spool and cable system designed to replicate OEM action. Replacing a worn or frayed cable reduces binding and inconsistent travel, letting the door open and close smoothly and predictably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete rear right passenger-side cable system engineered to OEM fit.\u003c\/li\u003e\n  \u003cli\u003eDurable materials and factory testing for consistent cable tension and action.\u003c\/li\u003e\n  \u003cli\u003eDirect-match mounting points—no trimming or modification required.\u003c\/li\u003e\n  \u003cli\u003eSold without motor for users who only need the cable mechanism replaced.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Toyota Sienna years and engines is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis Gledewen cable assembly fits the second-generation Sienna models powered by Toyota's V6 engines listed below. Use the provided part numbers to verify compatibility against your VIN or service manual before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 2004–2006 Toyota Sienna 3.3L DOHC V6 (engine code 3MZFE).\u003c\/li\u003e\n  \u003cli\u003eFits 2007–2010 Toyota Sienna 3.5L DOHC V6 (engine code 2GRFE).\u003c\/li\u003e\n  \u003cli\u003eCross-references OEM numbers: 85620-08042, 8562008042, 924-550, 69631-08030, 6963108030, 0085-09.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation mirrors the original factory setup and can often be completed with basic tools if you follow instructions or a reputable video guide. For safety and best results, many owners opt for professional installation, particularly when reassembling door alignment and electrical connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes one complete rear right cable assembly and printed installation instruction.\u003c\/li\u003e\n  \u003cli\u003eNo motor included—keeps cost low if motor replacement isn't needed.\u003c\/li\u003e\n  \u003cli\u003eManufacturer recommends professional installation if you are unsure about door reassembly or safety checks.\u003c\/li\u003e\n  \u003cli\u003eRegular visual checks help spot fraying or wear before failure occurs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this Gledewen part compare to OEM and aftermarket options?\u003c\/h3\u003e\n\u003cp\u003eThis cable assembly is produced to meet or exceed OEM specifications while offering significant cost savings compared with dealer pricing. It undergoes factory testing for fit and function so you get an affordable, reliable replacement without buying a full dealer assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to OEM dimensions for a precise fit and simple installation.\u003c\/li\u003e\n  \u003cli\u003eDurable construction aims to provide long service life comparable to original parts.\u003c\/li\u003e\n  \u003cli\u003eTypically much less expensive than dealer-sourced replacements, especially when a motor is not required.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 24-month warranty and factory-direct support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Gledewen Sliding Door Cable Assembly is intended for Toyota Sienna owners (2004–2010 V6 models) who need to repair a malfunctioning rear right power sliding door without replacing the motor. It’s a practical choice for DIY-savvy owners, independent shops, and fleet managers who want an OEM-matching replacement at a lower price, or for anyone troubleshooting a door that binds, slips, or won’t operate electrically.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include the sliding door motor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the Gledewen assembly is the complete rear right cable system only; the motor is not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2006 Sienna with a 3.3L engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits 2004–2006 Sienna models with the 3.3L V6 (engine code 3MZFE).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586774007993,"sku":"B0CQC8MV84","price":133.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-packaging-sliding-door-cable.jpg?v=1790492820"},{"product_id":"gledewen-sliding-door-cable-assembly-for-toyota-sienna-2004-2010-left-rear-driver-cable-oem-fit-replacement","title":"Gledewen Sliding Door Cable Assembly for Toyota Sienna 2004-2010 — Left Rear Driver Cable, OEM-fit Replacement","description":"\u003cp\u003e\u003cstrong\u003eGledewen Sliding Door Cable Assembly is a direct-fit replacement cable system for the driver left rear power sliding door on 2004–2010 Toyota Sienna V6 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete power sliding door cable assembly (without motor) restores smooth, reliable operation when the original spool or cable has worn, frayed, or failed. It is manufactured to meet or exceed OEM fit and function for the listed Sienna model years and engine codes, and ships with installation instructions so you or a technician can install it quickly.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this cable assembly fix my slow or stuck sliding door?\u003c\/h3\u003e\n\u003cp\u003eThe cable transfers motor torque to the door spool; when it frays or snaps the door stops moving reliably. Replacing the worn cable with a new Gledewen assembly returns consistent force transfer so the door opens and closes smoothly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces worn or broken spool control cable for the left rear power sliding door.\u003c\/li\u003e\n  \u003cli\u003eRestores smooth operation and consistent travel without slipping.\u003c\/li\u003e\n  \u003cli\u003eMeets OEM dimensions and routing to avoid interference with door hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my Toyota Sienna model and which OEM numbers does it replace?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is engineered specifically for 2004–2006 Toyota Sienna 3.3L (3MZFE) and 2007–2010 Sienna 3.5L (2GRFE) V6 models. It is a precise aftermarket match for the original cable system and replaces several OE part numbers for easy cross-reference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with: 2004–2006 Sienna 3.3L (3MZFE) and 2007–2010 Sienna 3.5L (2GRFE).\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers: 85620-08052, 8562008052, 924-578, 69641-08030, 6964108030.\u003c\/li\u003e\n  \u003cli\u003eFactory-tested to ensure direct fit and original routing without trimming or modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what tools or skills are required to install it?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one complete driver left rear power sliding door cable system and printed installation instructions. Basic hand tools and mechanical experience are sufficient for many DIYers, though a professional installation is recommended for safety and correct adjustment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePacking list: 1 x complete driver left rear cable assembly, 1 x installation instruction sheet.\u003c\/li\u003e\n  \u003cli\u003eTypical install: hand tools, panel removal, cable routing, and adjustment—watching a step-by-step video can help.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, have a trained technician install to ensure door alignment and safety systems remain intact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement and what warranty is offered?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen assembly is made from high-quality materials and factory-tested to provide long-term, flexible operation comparable to OEM parts. The product is backed by a 24-month warranty for replacement or refund through the seller.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from durable materials to resist wear and maintain smooth movement.\u003c\/li\u003e\n  \u003cli\u003ePassed multi-inspection processes at the factory for quality control.\u003c\/li\u003e\n  \u003cli\u003e24-month warranty with replacement or refund support via seller messaging channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a 2004–2010 Toyota Sienna V6 and your driver left rear power sliding door is sticking, noisy, slipping, or no longer operating, this Gledewen cable assembly is a cost-effective replacement to restore reliable door function. It's aimed at do-it-yourself mechanics and independent shops seeking a direct-fit, factory-tested aftermarket part that fits original OE routing and hardware. For safety-critical repairs or if the motor or other components are damaged, consult a professional technician.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this assembly include the motor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this kit is the driver left rear cable assembly only; the motor is not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Toyota engine codes does it fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits 2004–2006 Sienna 3.3L (3MZFE) and 2007–2010 Sienna 3.5L (2GRFE) models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586774073529,"sku":"B0CQC6YK5M","price":127.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-packaging_dbbf31fe-4f0e-4aa5-9aa6-6281f2042f53.jpg?v=1790492819"},{"product_id":"gledewen-heavy-duty-ball-joints-for-2014-2024-polaris-rzr-xp-1000-4-4-pack-corrosion-resistant","title":"Gledewen Heavy Duty Ball Joints for 2014–2024 Polaris RZR XP 1000\/4 — 4-Pack, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eGledewen Heavy Duty Ball Joints are a factory-tested replacement set designed to restore reliable steering and front suspension performance for compatible 2014–2024 Polaris RZR XP 1000 and Turbo models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese four heavy-duty ball joints (with bolts) replace worn suspension pivots that cause vibration, uneven tire wear, and steering play. Manufactured to meet or exceed OEM dimensions and finished for corrosion resistance, this kit is intended for direct swap-in installation and comes with parts that match Polaris service number KRZRBJ10. The package contains 4 ball joints and 4 bolts, supplied new from a factory-direct seller to provide high quality at a budget price.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these ball joints affect steering and front-end stability?\u003c\/h3\u003e\n\u003cp\u003eInstalling fresh ball joints removes excessive play in the suspension knuckle, returning crisp steering feel and predictable handling. Replacing worn units reduces side-to-side looseness and vibration transmitted to the steering wheel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct suspension geometry and wheel alignment behavior.\u003c\/li\u003e\n  \u003cli\u003eReduces steering wander and front-end shimmy under load.\u003c\/li\u003e\n  \u003cli\u003eImproves tire wear consistency across the tread.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat Polaris models and years does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis Gledewen kit is built to precisely fit a range of RZR XP models from 2014 through 2024. Check your vehicle’s model and year before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2014–2024 Polaris RZR XP 1000 and RZR XP 4 1000\u003c\/li\u003e\n  \u003cli\u003e2015–2024 Polaris RZR XP 1000 EPS High Lifter Edition\u003c\/li\u003e\n  \u003cli\u003e2016–2024 Polaris RZR XP 4 1000 EPS High Lifter, XP Turbo and XP 4 Turbo variants\u003c\/li\u003e\n  \u003cli\u003e2018–2024 Polaris RZR XP Turbo S and XP 4 Turbo S\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I remove and install the ball joints safely?\u003c\/h3\u003e\n\u003cp\u003eReplacement is straightforward with basic UTV tools and a ball-joint press. Remove the lower control arm, press the old ball joint out, press the new unit in, refit the retaining clip, and torque to Polaris specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDetach suspension lower arm from the vehicle according to service manual.\u003c\/li\u003e\n  \u003cli\u003eRemove retention clip, press out old ball joint with a removal tool.\u003c\/li\u003e\n  \u003cli\u003eUse ball-joint installation tool to press new unit in and reinstall clip and bolts.\u003c\/li\u003e\n  \u003cli\u003eRepeat for each required corner and recheck fastener torque and alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose this Gledewen replacement over used or generic parts?\u003c\/h3\u003e\n\u003cp\u003eThese ball joints are produced under factory-controlled inspection and sized to OEM tolerances, offering a balance of durability and cost-effectiveness. They are supplied new with manufacturer testing to reduce early failure risks compared to salvaged parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered for long service life with corrosion-resistant finishes.\u003c\/li\u003e\n  \u003cli\u003eFactory-direct pricing gives lower cost per unit than many branded alternatives.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 24-month warranty for replacement or refund support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Gledewen ball joint set suits Polaris RZR owners and technicians who need a dependable, budget-conscious replacement that restores steering precision and front-end stability. It’s ideal for off-road enthusiasts, fleet maintainers, and anyone replacing rusted, leaking, or worn ball joints on compatible 2014–2024 RZR XP 1000 and Turbo models who want a direct-fit, factory-dimensioned component with a warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these ball joints a direct fit for my 2019 Polaris RZR XP 1000?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this Gledewen kit fits 2014–2024 Polaris RZR XP 1000 models and matches OEM part KRZRBJ10.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the ball joints come with bolts and a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the set includes four bolts and is covered by a 24-month replacement or refund warranty.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586775122105,"sku":"B0CVVGNKB4","price":142.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-packaging-view.jpg?v=1790492877"},{"product_id":"gledewen-intermediate-steering-shaft-for-toyota-tacoma-2005-2015-2-7-4-0l-v6-direct-fit-needle-bearing-u-joints","title":"Gledewen Intermediate Steering Shaft for Toyota Tacoma 2005–2015 2.7\/4.0L V6 — Direct-Fit, Needle-Bearing U-Joints","description":"\u003cp\u003e\u003cstrong\u003eGledewen's intermediate steering shaft restores the connection between your Tacoma's steering wheel and gearbox for reliable, smooth steering response.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your 2005–2015 Toyota Tacoma (2.7L or 4.0L V6) shows play in the steering, unusual noises, or the wheel doesn't return cleanly after a turn, the intermediate steering shaft is often the cause. This replacement shaft is built to OE dimensions and engineered with surface-treated reinforced steel and precision needle-bearing U-joints so you regain factory-like control without extensive modification.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this replacement improve my Tacoma's steering feel?\u003c\/h3\u003e\n\n\u003cp\u003eInstalling this intermediate shaft eliminates worn joints and loose couplings that create clunks, binding, or wandering steering. The renewal of precise joints restores consistent rotation and predictable return-to-center behavior, improving everyday drivability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit to OE specifications for a no-fuss installation.\u003c\/li\u003e\n  \u003cli\u003ePrecision needle-bearing U-joints reduce play and noise.\u003c\/li\u003e\n  \u003cli\u003eSurface-treated reinforced steel resists corrosion and flexing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Tacoma models and part numbers does it match?\u003c\/h3\u003e\n\n\u003cp\u003eThis assembly is compatible with Toyota Tacoma pickup models from 2005 through 2015 equipped with 2.7L L4 or 4.0L V6 engines, including Base, Pre-Runner, X-Runner and TRD Pro trims. Confirm your vehicle's year, trim and OE number before ordering to ensure an exact match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: 2005–2015 Toyota Tacoma 2.7L and 4.0L V6 variants.\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers: 45220-04010, 4522004010, 425-602, 425602.\u003c\/li\u003e\n  \u003cli\u003eWorks with factory steering gearbox and existing U-joint locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and quality checks ensure durability?\u003c\/h3\u003e\n\n\u003cp\u003eThe shaft is constructed from reinforced steel with a protective surface treatment to limit rust and wear under road conditions. U-joints incorporate precision needle bearings for smooth articulation, and the assembly undergoes durability testing to validate long-term reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced steel shaft body for improved stiffness and longevity.\u003c\/li\u003e\n  \u003cli\u003eSurface treatment adds corrosion resistance in varied climates.\u003c\/li\u003e\n  \u003cli\u003eNeedle-bearing U-joints for consistent rotation and reduced backlash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is installation and what comes in the package?\u003c\/h3\u003e\n\n\u003cp\u003eThe intermediate shaft is designed as a direct replacement to minimize installation complexity for experienced DIYers or professional mechanics. The package contains one complete steering column shaft ready to install; verify fitment and OE number prior to beginning work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes: 1 x intermediate steering column shaft (complete assembly).\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design means no vehicle modifications required.\u003c\/li\u003e\n  \u003cli\u003eRecommended: basic hand tools and alignment check after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Gledewen intermediate steering shaft is intended for Toyota Tacoma owners and mechanics who need a reliable, OEM-dimension replacement for 2005–2015 2.7L and 4.0L trucks. Choose this part if you want to replace a worn or noisy steering shaft with a corrosion-resistant, precision-jointed assembly that matches OE numbers 45220-04010 \/ 4522004010 \/ 425-602 \/ 425602. Always confirm your vehicle year, engine, trim and original equipment number before purchase to ensure correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this shaft fit my 2010 Toyota Tacoma 4.0L V6?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits 2010 Tacoma 4.0L V6 models. Confirm your OE number (e.g., 45220-04010) before ordering for absolute compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include both U-joints?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes the complete intermediate steering column shaft assembly with its U-joints ready for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586797273273,"sku":"B0CQ4N16Y1","price":119.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-intermediate-steering-shaft-front-view.jpg?v=1790493227"},{"product_id":"gledewen-metal-tailgate-handle-for-1999-2007-chevy-silverado-gmc-sierra-reinforced-metal-includes-bezel-trim-clips","title":"Gledewen Metal Tailgate Handle for 1999–2007 Chevy Silverado \u0026 GMC Sierra — Reinforced Metal, Includes Bezel Trim Clips","description":"\u003cp\u003e\u003cstrong\u003eGledewen's heavy-duty metal tailgate handle is an OEM-fit replacement latch designed to restore smooth opening and long-term durability for 1999–2007 Chevy Silverado and GMC Sierra trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pickup’s tailgate handle is cracked, loose, or no longer latching reliably, swapping it for a rugged, metal replacement avoids repeated failures and restores original function. This upgraded Gledewen handle is made from reinforced metal with a weather-resistant finish and matches factory mounting points so installation is straightforward. It includes plastic bezel trim rod clips and fits the same vehicles covered by the OEM part numbers it replaces.\u003c\/p\u003e\n\n\u003ch3\u003eWill this handle fit my specific Silverado or Sierra model?\u003c\/h3\u003e\n\u003cp\u003eYes — this part is designed to be a direct fit for many late‑1990s and 2000s GM pickups. It replaces several common OEM numbers and aligns with the original mounting holes and sockets to minimize modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 1999–2006 Chevy Silverado 1500 and 1999–2004 2500 models.\u003c\/li\u003e\n  \u003cli\u003eFits 2001–2006 Silverado 1500HD, 2500HD, 3500 and 2007 Classic variants.\u003c\/li\u003e\n  \u003cli\u003eAlso fits 1999–2006 GMC Sierra 1500 and 1999–2004 Sierra 2500; includes 2001–2006 HD models and 2007 Classic.\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers 15997911, 15228539, 15228541, 15228540 and compatible GM cross-references.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Gledewen metal tailgate handle?\u003c\/h3\u003e\n\u003cp\u003eThis handle is manufactured from reinforced metal and finished to resist corrosion, UV exposure, and everyday wear. Its larger lifespan compared with stock plastic handles reduces the chance of future breaks, even under heavy use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced metal construction for strength under load.\u003c\/li\u003e\n  \u003cli\u003eSurface treatment protects against rust and weathering.\u003c\/li\u003e\n  \u003cli\u003ePlastic bezel trim rod clips included to secure linkage reliably.\u003c\/li\u003e\n  \u003cli\u003eTested to match factory operating parameters for smooth action.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation — do I need special tools or adjustments?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be quick because the handle mirrors the OEM design and mounting points. Typical installs require only basic hand tools and a few minutes to swap the old handle for the new unit; no cutting or drilling should be necessary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design aligns with factory screw holes and sockets.\u003c\/li\u003e\n  \u003cli\u003eIncludes bezel trim rod clips to reconnect the tailgate linkage.\u003c\/li\u003e\n  \u003cli\u003eCompatible with existing lock cylinder and bezel when applicable.\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: screwdriver, socket set, and pliers for clips.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with this part?\u003c\/h3\u003e\n\u003cp\u003eGledewen backs the handle with a 24-month warranty against defects, and customer support is available if the part cracks, fails to operate, or arrives damaged. The warranty simplifies replacement or refund claims through the seller.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24-month coverage for defects and functional failures.\u003c\/li\u003e\n  \u003cli\u003eReplacement or refund options handled via seller messaging.\u003c\/li\u003e\n  \u003cli\u003eDetailed fit information and OEM cross-references listed for verification.\u003c\/li\u003e\n  \u003cli\u003ePackaged with hardware clips needed to reconnect linkage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: truck owners and mechanics who need a long-lasting, factory-compatible replacement tailgate handle for late‑1990s to mid‑2000s Chevy Silverado and GMC Sierra models. It’s particularly useful for drivers who prefer a metal upgrade to prevent recurring breakage from plastic OEM handles, or for anyone restoring a pickup to reliable working condition without modifying the tailgate.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace OEM part number 15228539?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it replaces 15228539 and several related GM numbers and is designed to match original mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the trim rod clips included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, plastic bezel trim rod clips are included to reconnect the tailgate linkage securely.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586891055289,"sku":"B0DLGZWLT3","price":94.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-handle-overview.jpg?v=1790496146"},{"product_id":"gledewen-exterior-door-handle-set-for-1999-2007-chevy-silverado-tahoe-crew-cab-4-piece-direct-fit-corrosion-resistant","title":"Gledewen Exterior Door Handle Set for 1999–2007 Chevy Silverado \u0026 Tahoe Crew Cab — 4‑Piece Direct‑Fit, Corrosion-Resistant","description":"\u003cb\u003eGledewen exterior door handle set replaces all four outer door handles on compatible 1999–2007 GM crew-cab trucks and SUVs for a durable, direct-fit solution.\u003c\/b\u003e\n\n\u003cp\u003eIf a broken or worn exterior handle keeps you from opening a door or undermines your vehicle’s appearance, this complete four-handle kit restores functionality and curb appeal. The set includes front left (with keyhole), front right (without keyhole), and both rear outer handles; each piece is built to match original equipment fit and finish for Chevy, GMC and Cadillac models listed below.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this handle set fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit targets late‑90s and early‑2000s GM full‑size trucks and SUVs with crew cabs. Fitment covers many Chevrolet Silverados, Tahoes, Suburbans, Avalanches, GMC Sierras, Yukons and select Cadillac Escalade models. Always verify compatibility by comparing your vehicle year and OE part numbers before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible families: Silverado 1500\/2500\/3500 Crew Cab, Tahoe, Suburban, Avalanche, Sierra, Yukon and Escalade models from 1999–2007.\u003c\/li\u003e\n  \u003cli\u003eIncluded OE reference numbers: 15034985, 15182406, 15721571, 15721572, GM1520105, GM1521105, GM1310129, GM1311143, 25942272, 77261, 80579, 80578.\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle’s model year and existing handle style (keyhole on driver side) against this list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install these replacement handles?\u003c\/h3\u003e\n\u003cp\u003eThe handles are designed for a bolt‑on, no‑modification installation that follows factory attachment points. Basic hand tools and about 15–30 minutes per door are typical for experienced diyers; professional installation is optional if you prefer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design — no trimming or drilling required.\u003c\/li\u003e\n  \u003cli\u003eSame mounting holes and latch engagement as OEM for straightforward alignment.\u003c\/li\u003e\n  \u003cli\u003eTypical installation time: about 15 minutes per handle for a familiar DIYer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from this handle set?\u003c\/h3\u003e\n\u003cp\u003eEach handle is constructed from corrosion-resistant metal and finished to resist fading and rust in normal road conditions. Components are intended to meet or surpass OEM operating life, making them a cost-effective way to replace brittle or failed factory handles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh‑quality metal construction for strength and longevity.\u003c\/li\u003e\n  \u003cli\u003ePainted\/upgraded finish to reduce visible wear and resist corrosion.\u003c\/li\u003e\n  \u003cli\u003eManufactured for reliable mechanical operation under normal use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this kit include warranty or post‑purchase support?\u003c\/h3\u003e\n\u003cp\u003eThe set ships new and includes a manufacturer-backed limited warranty period to protect against defects and premature failure. If you encounter problems with fit, operation or finish, contact customer support with your order details for assistance and warranty service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew condition — shipped as a complete four-handle exterior kit.\u003c\/li\u003e\n  \u003cli\u003eManufacturer warranty covers defects; contact seller for claims and support.\u003c\/li\u003e\n  \u003cli\u003eReplacement parts intended to match OEM function at a lower cost than dealer parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Gledewen door-handle kit is aimed at owners of compatible Chevrolet, GMC or Cadillac crew-cab trucks and SUVs who need a reliable, affordable replacement for cracked, sticky, or missing outside handles. It’s especially useful for DIY mechanics and fleet managers who want OEM-style fit and finish without dealer pricing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these handles a direct fit for my 2003 Silverado crew cab?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your 2003 Silverado is a compatible crew cab listed above, these handles are direct-fit replacements—verify OE numbers to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the front left handle include a keyhole?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes a front left driver-side handle with a keyhole and a front right handle without one.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586937749689,"sku":"B09PTGGMCY","price":108.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-left-handle-keyhole.jpg?v=1790497452"},{"product_id":"gledewen-spare-tire-winch-carrier-for-1999-2017-chevy-gmc-trucks-and-suvs-direct-fit-reinforced-steel","title":"Gledewen Spare Tire Winch Carrier for 1999–2017 Chevy \u0026 GMC Trucks and SUVs — Direct-Fit Reinforced Steel","description":"\u003cp\u003e\u003cstrong\u003eGledewen spare tire hoist is a direct-fit replacement winch carrier engineered to lift and lower the factory spare on compatible 1999–2017 Chevy Silverado, Suburban, Tahoe and GMC Sierra, Yukon models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty spare tire winch carrier is built to match original equipment fitment and function for many Chevrolet and GMC trucks and SUVs. Constructed from treated reinforcement steel and tested to meet OEM standards, the unit replaces part numbers 924-510, 20870067, 15703311 and 15866164. It installs in the factory location and restores the proper operation of the underbody spare hoist mechanism so you can access or stow your spare wheel reliably.\u003c\/p\u003e\n\n\u003ch3\u003eWill this spare tire hoist fit my truck?\u003c\/h3\u003e\n\u003cp\u003eIf your vehicle is listed among the supported model years and trims, this Gledewen winch carrier is designed for a bolt-in replacement. It covers a wide range of Chevrolet and GMC pickups and full-size SUVs from 1999 through 2017, but compatibility depends on wheel lug configuration and exact model variant.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovers 1999–2017 Chevy Silverado 1500 and select HD models and Classics.\u003c\/li\u003e\n  \u003cli\u003eFits 1999–2017 GMC Sierra 1500 and corresponding HD and Classic variants.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2000 Suburban\/Tahoe and 2000 Yukon\/XL 4.8L and 5.3L models.\u003c\/li\u003e\n  \u003cli\u003eOnly for vehicles with 5- or 6-lug wheels; NOT compatible with 8-lug wheel trucks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eThe hoist is manufactured to OE specifications for a straightforward, direct swap with the original unit. Basic hand tools and a safe method to support the spare during removal are typically all that’s required, although rusted fasteners on older trucks may need penetrating lubricant or impact assistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design means no custom fabrication or modifications in most cases.\u003c\/li\u003e\n  \u003cli\u003eTypical install requires wrenches, socket set and a jack or support for the spare tire.\u003c\/li\u003e\n  \u003cli\u003eReplace using original part numbers and mounting points for correct alignment.\u003c\/li\u003e\n  \u003cli\u003eConsult vehicle service manual if unsure about torque specs or brake\/axle clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and reliability features?\u003c\/h3\u003e\n\u003cp\u003eGledewen builds this spare tire winch from surface-treated reinforced steel to resist corrosion and add rigidity under load. Units undergo quality checks to ensure stable performance so the spare raises and lowers smoothly without binding or premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface-treated reinforced steel improves corrosion resistance and durability.\u003c\/li\u003e\n  \u003cli\u003eManufactured to OEM dimensions for consistent fit and operation.\u003c\/li\u003e\n  \u003cli\u003eEngineered to endure repeated use and the environmental conditions under the vehicle.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 12-month warranty and quality-control testing before shipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich part numbers does this replace and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThis winch carrier is a direct replacement for multiple OE numbers, making it suitable when your original part shows wear or fails. Matching the original part number helps ensure compatibility with factory mounting hardware and spare wheel attachment points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OE references: 924-510, 20870067, 15703311, 15866164.\u003c\/li\u003e\n  \u003cli\u003eUsing the matching part number reduces installation issues and alignment problems.\u003c\/li\u003e\n  \u003cli\u003eHelps guarantee that the spare is retained and deployed as the factory intended.\u003c\/li\u003e\n  \u003cli\u003eCheck your old part number and photos against the product listing before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Gledewen Spare Tire Hoist Winch Carrier is intended for owners of compatible Chevy Silverado, GMC Sierra trucks and full-size Chevy\/GMC SUVs from the listed years who need an OEM-style replacement for a worn or broken spare hoist. It’s a good choice for DIY mechanics, professional shops, and vehicle restorers who require a direct-fit, corrosion-resistant unit backed by a 12-month warranty. Before ordering, verify your vehicle model year, lug configuration and original part number to ensure correct fitment; reach out to Gledewen customer support if you need help matching parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit 8-lug wheel trucks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Gledewen hoist fits only 5- or 6-lug wheel vehicles, not 8-lug configurations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers this spare tire winch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Gledewen includes a 12-month warranty with free replacement or refund if defects arise.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586947776697,"sku":"B07S36MWWM","price":105.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-view-packed-spare-tire-hoist.jpg?v=1790497582"},{"product_id":"gledewen-spare-tire-hoist-winch-carrier-fits-2001-2018-chevy-gmc-cadillac-oe-fit-corrosion-resistant","title":"Gledewen spare tire hoist winch carrier — Fits 2001–2018 Chevy\/GMC\/Cadillac, OE-fit, corrosion-resistant","description":"\u003cp\u003e\u003cstrong\u003eGledewen's spare tire hoist is a direct-fit winch carrier engineered to lift and lower the factory spare wheel on compatible Chevy, GMC and Cadillac SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty spare tire hoist replaces worn or broken OEM carriers on many Chevy Tahoe, Suburban, Avalanche, GMC Yukon\/Yukon XL and Cadillac Escalade models from 2001–2018. Built to OE dimensions for a hassle-free installation, the unit restores secure spare storage and smooth operation when lowering or raising the tire. It arrives finished for corrosion resistance and backed by a 24-month warranty so you can fit a replacement with confidence.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this Gledewen tire hoist fit?\u003c\/h3\u003e\n\u003cp\u003eThis winch carrier is compatible with a wide range of GM full-size SUVs and pickups from the early 2000s through 2018. Confirm fit by year and model before ordering to ensure correct mounting points and cable routing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2001–2018 Chevy Tahoe; 2001–2014 \u0026amp; 2015–2018 Chevy Suburban models\u003c\/li\u003e\n  \u003cli\u003e2002–2018 Cadillac Escalade, Escalade ESV and Escalade EXT (specific years listed)\u003c\/li\u003e\n  \u003cli\u003e2001–2018 GMC Yukon, Yukon XL, and 2002–2013 Chevy Avalanche variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this unit match the original equipment?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen hoist is manufactured to OE specifications so it fits the factory mounting points and interacts correctly with the stock spare assembly. That means you get a like-for-like replacement without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to OE dimensions for direct-fit installation\u003c\/li\u003e\n  \u003cli\u003eDesign includes the upgraded secondary latch release improvement\u003c\/li\u003e\n  \u003cli\u003eWorks with factory spare cables, hardware, and wheel mounting setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and durability features?\u003c\/h3\u003e\n\u003cp\u003eDurability is a priority: the hoist body uses reinforced steel treated for corrosion resistance and long service life. The design and coatings help protect the winch from road debris, salt and humidity so the carrier remains functional through seasons of use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface-treated reinforced steel construction for rust resistance\u003c\/li\u003e\n  \u003cli\u003eSturdy gearing and spool mechanism for consistent lift\/lower action\u003c\/li\u003e\n  \u003cli\u003eManufactured to withstand OEM-level load and fatigue cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich OE part numbers does it replace and what warranty applies?\u003c\/h3\u003e\n\u003cp\u003eThis Gledewen spare tire hoist replaces numerous GM part numbers so it’s an ideal replacement when the original number matches a failed unit. It’s sold with a 24-month limited warranty and customer support for replacement or refund if manufacturing defects arise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovers many OEM numbers including 924-517, 22968178, 25974845, 15204233 and related cross-references\u003c\/li\u003e\n  \u003cli\u003eComes with a 24-month warranty against manufacturing defects\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for troubleshooting, returns or replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Gledewen spare tire hoist is aimed at owners and technicians working on GM full-size SUVs and Avalanche pickups who need a reliable, OE-dimension replacement for a broken or corroded spare winch. If your vehicle uses an underside spare wheel with a cable-driven hoist and the OEM part number matches one of the cross-references, this unit restores safe spare storage and simple operation without alteration.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this hoist myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is an OE-dimension direct-fit unit; basic hand tools and simple vehicle access are typically all that’s needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace part number 22968178?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Gledewen hoist lists 22968178 among its cross-referenced OEM replacement numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586947809465,"sku":"B0883BWHVP","price":109.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-view-hoist-assembly.jpg?v=1790497579"},{"product_id":"gledewen-door-lock-actuator-motor-front-right-passenger-direct-fit-oe-connector-reinforced-housing","title":"Gledewen Door Lock Actuator Motor Front Right (Passenger) — Direct-Fit OE Connector \u0026 Reinforced Housing","description":"\u003cp\u003e\u003cstrong\u003eGledewen front right (passenger side) door lock actuator motor replaces worn or failed latch actuators to restore power door locking and remote locking functions on many Toyota, Lexus and Scion vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your passenger-side door no longer locks or unlocks reliably with the key fob or interior switch, a faulty door lock actuator is a common cause. This direct-fit replacement motor is built to OE dimensions and electrical connector patterns so installation is straightforward for DIYers and technicians. It’s intended as a practical replacement for listed part numbers including 69030-06200, 69030-0C050, 69030-42230 and 931-403.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this actuator restore door locking performance?\u003c\/h3\u003e\n\u003cp\u003eThe actuator contains an electro-mechanical motor and linkage that moves the latch mechanism when a lock\/unlock signal is received. Swapping a bad unit for this replacement reinstates the door’s ability to respond to the remote, door switch and central locking system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design matches original connector and mounting points for quick replacement\u003c\/li\u003e\n  \u003cli\u003eHigh-quality electric motor for consistent actuation under normal use\u003c\/li\u003e\n  \u003cli\u003eReinforced plastic housing resists wear and reduces the chance of cracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis actuator covers a wide range of Toyota, Lexus and Scion models across several model years. Always confirm fitment by matching your vehicle year, model and original part number before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon compatibility: 2010–2019 Toyota 4Runner, 2007–2017 Camry, 2009–2013 Corolla\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Highlander, RAV4, Sienna, Tundra and select Lexus IS, ES, GS, LS, RX and Scion models\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers: 69030-06200, 69030-0C050, 69030-42230, 931-403\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and use?\u003c\/h3\u003e\n\u003cp\u003eInstallation generally involves removing the door panel to access the latch assembly, unplugging the factory connector, and bolting the replacement actuator into place. Because this unit uses the OE-style connector and mounting points, you typically won’t need wiring modifications or extra brackets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connector matches factory wiring harness for a solid electrical connection\u003c\/li\u003e\n  \u003cli\u003eStandard mounting holes align with the original latch for minimal adjustment\u003c\/li\u003e\n  \u003cli\u003eNo additional wiring harness parts included — reuse the vehicle’s existing harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement compared with the original?\u003c\/h3\u003e\n\u003cp\u003eGledewen designed the actuator to meet OE fit and function standards while improving longevity with reinforced materials. The motor and linkage are tested to ensure reliable cycling, and the housing is constructed to resist common failure modes such as cracking or water intrusion in normal conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced plastic housing for improved impact and wear resistance\u003c\/li\u003e\n  \u003cli\u003eElectro-mechanical release mechanism engineered for smooth actuation\u003c\/li\u003e\n  \u003cli\u003eManufacturer-backed 12-month warranty for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: This replacement actuator is intended for owners and technicians repairing passenger-side front door locking on compatible Toyota, Lexus and Scion models who want a direct-fit, OE-style part. It suits DIY mechanics comfortable removing door panels and handling basic electrical connectors, as well as professional installers seeking a durable, warranted alternative to the original unit. Confirm your vehicle’s year and part number before ordering to ensure proper fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this actuator fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match your vehicle year, model and original part number (e.g., 69030-06200) to confirm compatibility before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require new wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the unit uses the OE-style connector so the factory wiring harness is reused; no extra harness included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67586961539257,"sku":"B07QJXCYPW","price":94.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-right-actuator-front-view.jpg?v=1790498163"},{"product_id":"gledewen-chrome-exterior-door-handle-set-for-2007-2014-chevy-gmc-cadillac-4-pc-front-rear-oem-fit","title":"Gledewen Chrome Exterior Door Handle Set for 2007–2014 Chevy\/GMC\/Cadillac – 4-Pc Front \u0026 Rear, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eGledewen's 4-piece chrome exterior door handle set replaces worn or broken front and rear driver and passenger handles on select 2007–2014 Chevy, GMC and Cadillac trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your stock door handles are cracked, stiff, or no longer latch reliably, this complete set restores smooth operation and a factory look without the dealer price. Each handle is engineered to match OEM dimensions and fit points so installation uses the original mounting locations. The chrome finish resists weathering and keeps the exterior appearance consistent with the vehicle’s factory trim.\u003c\/p\u003e\n\n\u003ch3\u003eWill these handles fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThese handles fit a wide range of GM models from the 2007–2014 model years. Verify the part numbers and model years against your vehicle before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Chevy Avalanche, Silverado 1500\/2500\/3500, Suburban, Tahoe (2007–2014 ranges vary by model).\u003c\/li\u003e\n  \u003cli\u003eCompatible with GMC Sierra, Yukon and Yukon XL (2007–2014 ranges vary by model).\u003c\/li\u003e\n  \u003cli\u003eCompatible with Cadillac Escalade, Escalade ESV and Escalade EXT (2007–2014 ranges vary by model).\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers: 20828258, 22738721, 22738722, 25960525\/26, 80545\/46, 84053436, 15915150.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these handles compare to OEM parts?\u003c\/h3\u003e\n\u003cp\u003eEach handle is produced to match OEM shape and mounting. Materials and surface treatment are selected to provide durable operation and a long-lasting chrome appearance similar to factory parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt from reinforced custom plastic for impact resistance and reduced wear.\u003c\/li\u003e\n  \u003cli\u003eChrome surface-treated to resist corrosion and fading in harsh weather.\u003c\/li\u003e\n  \u003cli\u003eUndergoes endurance pull validation and functional testing to meet factory operating specs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThis listing contains a full set of four exterior handles: front and rear for both driver and passenger sides. Installation typically reuses the vehicle’s original fasteners and linkage components; basic hand tools and moderate mechanical skill are all that’s required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 4 chrome door handles (driver \u0026amp; passenger, front \u0026amp; rear).\u003c\/li\u003e\n  \u003cli\u003eDesigned for bolt-on replacement using factory mounting points and linkages.\u003c\/li\u003e\n  \u003cli\u003eNo glue or special adhesives — standard hand tools recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support are provided?\u003c\/h3\u003e\n\u003cp\u003eGledewen backs this exterior handle set with a 24-month warranty against defects in materials and workmanship. If a handle cracks, fails to operate, or shows premature deterioration within the warranty period, Gledewen offers replacement or refund service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24-month limited warranty with replacement or refund options.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment questions and post-sale assistance.\u003c\/li\u003e\n  \u003cli\u003eClear replacement OE numbers listed to simplify comparison with your original part.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This 4-piece Gledewen chrome handle set is aimed at owners and technicians restoring appearance and function to mid-2000s GM trucks and SUVs who want OEM-style fit and chrome finish without the OEM price. It’s ideal for vehicles with cracked or sticky handles, for fleet maintenance replacing multiple failing units, or for DIYers doing a trim refresh. Confirm your vehicle year and original part number before purchase to ensure a precise match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these handles fit my 2009 Chevy Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this 4-piece set is listed as compatible with Chevy Silverado 1500 models from 2007–2013. Verify your OE part number to confirm exact match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty does Gledewen provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Gledewen includes a 24-month warranty covering defects, with replacement or refund options and customer support for fitment help.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587106832569,"sku":"B07QWPBHM5","price":106.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-passenger-handle-front-view.jpg?v=1790499514"},{"product_id":"gledewen-exterior-rear-door-handles-for-1999-2007-chevy-silverado-gmc-sierra-extended-cab-metal-lever-pair","title":"Gledewen Exterior Rear Door Handles for 1999–2007 Chevy Silverado \u0026 GMC Sierra Extended Cab — Metal-Lever Pair","description":"\u003cp\u003e\u003cstrong\u003eGledewen metal exterior door handles are a pair of direct-fit replacement outside rear handles (driver and passenger) designed to restore function to 1999–2007 Chevy Silverado and GMC Sierra extended cab trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf one of your rear outside handles has broken or become loose, this replacement set offers a durable, budget-friendly fix engineered to match original equipment fitment. Each kit includes two metal-lever, plastic-housing handles for the extended cab rear left and right positions, built to meet OEM-style specifications so installation is straightforward and reliable.\u003c\/p\u003e\n\n\u003ch3\u003eWill these handles fit my truck?\u003c\/h3\u003e\n\u003cp\u003eThese Gledewen handles are made specifically for extended cab rear doors on late‑1990s and early‑2000s Chevy and GMC full-size trucks. They match the original mounting points and linkage style so they replace the factory pieces without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: 1999–2006 Chevy Silverado 1500, 1999–2004\/2001–2006 Silverado 2500\/2500 HD\/3500, and 2007 Silverado Classic variants.\u003c\/li\u003e\n  \u003cli\u003eAlso fits 1999–2006 GMC Sierra 1500 and corresponding 2500\/3500 years plus 2007 Classics.\u003c\/li\u003e\n  \u003cli\u003eExact OEM cross-references: 15758171, 15758172, GM1520115, GM1521115, 79100, 79107.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be user-friendly for anyone comfortable with basic automotive DIY jobs. The handles follow OEM design and require minimal tools—expect about 15 minutes per side when rerouting linkage and securing the mounting fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo welding or body modifications required; bolt-in replacement using factory holes.\u003c\/li\u003e\n  \u003cli\u003eTypical tools: screwdriver, socket set, and trim panel remover.\u003c\/li\u003e\n  \u003cli\u003eIncludes both left and right extended cab rear outside handles for a complete repair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and materials?\u003c\/h3\u003e\n\u003cp\u003eGledewen supplies metal levers housed in a durable plastic body to balance strength and corrosion resistance. Components undergo quality checks to provide a long service life comparable to OEM parts without the premium price.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal internal lever for reliable actuation under repeated use.\u003c\/li\u003e\n  \u003cli\u003eHigh-quality plastic housing to resist weather and road debris.\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet factory operating specifications and tolerances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this product include warranty or support?\u003c\/h3\u003e\n\u003cp\u003eYour purchase is backed by a 24-month warranty from Gledewen and customer support for fitment or product concerns. If the handle fails, cracks, or otherwise stops working within the warranty window, contact the seller for replacement or assistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-year warranty and satisfaction support via seller messaging.\u003c\/li\u003e\n  \u003cli\u003eReplacement covers manufacturing defects and premature failures under normal use.\u003c\/li\u003e\n  \u003cli\u003eClear compatibility list to avoid ordering the wrong component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This handle set is intended for Chevy and GMC owners with extended cab Silverado or Sierra trucks (model years listed above) who need a reliable, cost-effective replacement for broken or worn rear outside handles. It’s ideal for DIY mechanics, fleet maintenance, and anyone who prefers an OEM-style repair without dealership pricing. Verify your model year and rear extended cab configuration against the compatibility list and OE part numbers before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these handles fit both left and right rear extended cab doors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes two outside handles for the extended cab rear driver and passenger sides.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation usually take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installations take about 15 minutes per side for someone with basic tools and experience.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587241836729,"sku":"B0BPM9BGJJ","price":104.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-packaging-handle-set.jpg?v=1790502400"},{"product_id":"gledewen-tie-rod-end-kit-for-honda-foreman-rincon-atvs-complete-2-tie-rod-4-end-replacement-with-jam-nuts","title":"Gledewen Tie Rod End Kit for Honda Foreman\/Rincon ATVs — Complete 2-Tie Rod, 4-End Replacement with Jam Nuts","description":"\u003cp\u003e\u003cstrong\u003eGledewen Tie Rod End Kit is a complete, new replacement set that restores steering alignment and removes play for compatible Honda Foreman, Rincon and Fourtrax ATVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your ATV steers unevenly, pulls to one side, or the front end shows uneven tire wear, worn tie rods or loose tie rod ends are often the cause. This Gledewen kit includes two tie rods, four tie rod ends, jam nuts and cotter pins so you can replace both sides and return the front end to proper geometry in about 15 minutes per side. The components are manufactured to OE-style specifications for an inexpensive, direct-fit aftermarket option.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit affect steering feel and alignment?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn tie rods and tie rod ends eliminates free play in the steering linkage and restores predictable handling. After installation you should notice less steering vibration, improved straight-line tracking, and more even tire wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemoves looseness that causes steering wheel shake\u003c\/li\u003e\n  \u003cli\u003eStops one-sided pulling caused by misaligned front end\u003c\/li\u003e\n  \u003cli\u003eHelps tires wear evenly by restoring correct toe settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Honda models and years does the kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit covers a broad range of Honda ATVs across multiple model families. Verify compatibility with your VIN or service manual before ordering to ensure a proper match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2005–2013 Honda Foreman 500 (TRX500 series)\u003c\/li\u003e\n  \u003cli\u003e2001–2014 Honda Foreman Rubicon 500 (TRX500 series)\u003c\/li\u003e\n  \u003cli\u003e2003–2005 Honda Rincon 650 and 2006–2016 Rincon 680\u003c\/li\u003e\n  \u003cli\u003e1993–2000 Honda Fourtrax 300 (TRX300)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eEach new Gledewen kit ships complete with both tie rods, four tie rod ends, jam nuts and cotter pins so you replace the entire steering link at once. The parts are designed for direct fit and simple installation with common hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo tie rods and four tie rod ends for left and right replacement\u003c\/li\u003e\n  \u003cli\u003eJam nuts and cotter pins included—no extra hardware required\u003c\/li\u003e\n  \u003cli\u003eOE-spec fitment allows a straightforward swap in about 15 minutes per side\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these parts quality replacements and is there warranty coverage?\u003c\/h3\u003e\n\u003cp\u003eGledewen supplies aftermarket components made to match OEM dimensions and fit, built from durable materials to extend service life. The product is backed by a 24-month warranty handled through the seller for replacement or refund if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to meet OEM specifications for fit and function\u003c\/li\u003e\n  \u003cli\u003eDurable construction tested on vehicles for reliability\u003c\/li\u003e\n  \u003cli\u003e24-month warranty and customer service through the seller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Gledewen Tie Rod End Kit is aimed at ATV owners and DIY mechanics who need a cost-effective, full steering linkage refresh for applicable Honda models. It’s ideal if your ATV shows steering play, uneven tire wear, or pulls to one side and you want a direct-fit aftermarket option that includes all necessary hardware for a complete replacement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this kit myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s a direct-fit kit with included jam nuts and cotter pins; typical installation takes about 15 minutes per side with common hand tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit match OEM specifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The parts are built to OE-style dimensions and designed to function like OEM components, backed by a 24-month seller warranty.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587242885305,"sku":"B09MD4F816","price":112.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-tie-rod-end-kit-front-view.jpg?v=1790502444"},{"product_id":"gledewen-tie-rod-end-kit-for-yamaha-big-bear-400-2000-2012-2-rods-4-ends-oe-fit-24-month-warranty","title":"Gledewen Tie Rod End Kit for Yamaha Big Bear 400 2000–2012 — 2 rods \u0026 4 ends, OE-fit, 24‑month warranty","description":"\u003cp\u003e\u003cstrong\u003eGledewen Tie Rod End Kit is a complete, factory-fit replacement set of two tie rods and four tie rod ends designed to restore precise steering and correct front-end alignment on compatible Yamaha ATVs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your ATV is pulling, the steering feels loose, or you see uneven tire wear, worn tie rods or tie rod ends are often the cause. This kit supplies two replacement tie rods, four tie rod ends, cotter pins and jam nuts so you can return steering geometry to specification. Made to OE-like dimensions and backed by a 24-month warranty, the Gledewen kit offers an affordable way to maintain safe, predictable steering across multiple Yamaha models from 2000 to 2012.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this kit fits my Yamaha ATV?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is listed for the most common Yamaha utility and recreation models from 2000–2012. Check your model and year before ordering; the kit was engineered to match original mounting points so it bolts in without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Big Bear 400 (2000–2012)\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Kodiak 400\/450 (2003–2006), Bruin 350 (2004–2006)\u003c\/li\u003e\n  \u003cli\u003eFits Grizzly 350\/400\/450 (2007–2012) and Wolverine 350\/450 (2006–2010)\u003c\/li\u003e\n  \u003cli\u003eIncludes two tie rods, four tie rod ends, cotter pins and jam nuts for a full front-end replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat improvements will I notice after installing this tie rod end kit?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn tie rods and ends immediately restores steering response and helps eliminate pull, wander, and steering-wheel vibration. Correct alignment reduces uneven tire wear and improves handling confidence at low and moderate speeds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother, tighter steering feel and less play in the front end\u003c\/li\u003e\n  \u003cli\u003eReduced steering vibration and directional pull\u003c\/li\u003e\n  \u003cli\u003eMore even tire wear and better tracking after alignment\u003c\/li\u003e\n  \u003cli\u003eRestores correct geometry for safer, predictable handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen kit is manufactured to OE specifications for a direct-fit installation that most mechanically-inclined owners can complete in about 15 minutes per side. Basic hand tools and a torque wrench are sufficient; no special presses are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical tools: wrenches, sockets, torque wrench, pliers for cotter pins\u003c\/li\u003e\n  \u003cli\u003eEstimated time: about 15 minutes per side for experienced DIYers\u003c\/li\u003e\n  \u003cli\u003eDirect-fit parts avoid cutting or modifying steering components\u003c\/li\u003e\n  \u003cli\u003eRecheck alignment after install — a professional alignment is recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality and warranty support does this kit include?\u003c\/h3\u003e\n\u003cp\u003eGledewen supplies brand-new aftermarket components built to meet OEM dimensions and durability expectations. Each kit has been through fit testing on applicable vehicles and comes with a 24-month warranty for replacement or refund through the seller.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% new parts manufactured to OE-like specifications\u003c\/li\u003e\n  \u003cli\u003eDurable materials and ball joints tested for typical ATV use\u003c\/li\u003e\n  \u003cli\u003eFactory-direct pricing for value-conscious owners\u003c\/li\u003e\n  \u003cli\u003e24-month warranty with replacement or refund via seller support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Gledewen Tie Rod End Kit is ideal for owners of compatible Yamaha ATVs who are experiencing steering looseness, pulling, wheel shimmy, or uneven tire wear and want an affordable direct-fit replacement. It suits DIY mechanics who prefer a quick, bolt-in solution and fleet managers looking for cost-effective maintenance parts. For safety, installers should recheck front-end alignment after replacement or have a shop perform the final alignment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include everything needed for both sides?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit contains two tie rods, four tie rod ends, cotter pins and jam nuts for a full front-end replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these parts fit my 2005 Kodiak 450?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit lists compatibility with 2003–2006 Kodiak 450 (YFM450).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587242950841,"sku":"B09MD3TBZX","price":104.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-tie-rod-kit-front-packaging.jpg?v=1790502446"},{"product_id":"gledewen-tie-rod-ends-kit-for-kawasaki-brute-force-750-2005-2016-complete-steering-linkage-with-cotter-pins","title":"Gledewen Tie Rod Ends Kit for Kawasaki Brute Force 750 (2005–2016) — Complete Steering Linkage with Cotter Pins","description":"\u003cp\u003e\u003cstrong\u003eGledewen Tie Rod Ends Kit is a complete replacement steering linkage set designed to restore tight, predictable steering on compatible Kawasaki Brute Force and Honda TRX ATVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your ATV steers roughly, pulls to one side, or shows uneven front tire wear, worn tie rod ends are often the cause. This new Gledewen kit supplies two tie rods, four threaded tie rod ends, cotter pins and jam nuts so you can replace the entire outer linkage assembly quickly and get the front end back to proper alignment. Made as an aftermarket, OE-spec direct-fit option, the kit is a budget-friendly way to address play in the steering without compromising durability.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit improve my ATV’s steering feel?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn tie rod ends stops unwanted free play between the steering box and the wheels, so the handlebars respond more crisply. Once installed, steering inputs translate more predictably to wheel direction, reducing wander and steering wheel vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEliminates excessive play that causes wandering or delayed response\u003c\/li\u003e\n  \u003cli\u003eReduces steering wheel shake from loose joints\u003c\/li\u003e\n  \u003cli\u003eHelps restore consistent toe settings for better tracking\u003c\/li\u003e\n  \u003cli\u003eIncludes cotter pins and jam nuts for secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich models and years will this Gledewen kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit was produced to match the tie rod dimensions and thread sizes used on a range of Kawasaki Brute Force and Honda TRX ATVs. Always verify part compatibility with your VIN or vehicle year range before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKawasaki Brute Force 750: selected 2005–2016 KVF models including EPS variants\u003c\/li\u003e\n  \u003cli\u003eKawasaki Brute Force 650: selected 2006–2013 KVF models\u003c\/li\u003e\n  \u003cli\u003eHonda TRX450R\/TRX450ER: selected 2004–2014 model years\u003c\/li\u003e\n  \u003cli\u003eEach kit contains two tie rods, four tie rod ends, cotter pins and jam nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with basic suspension and steering work; many users complete the swap in about 15 minutes per side with hand tools. You’ll need common tools and should perform a wheel alignment or toe check after replacement to ensure even tire wear and safe handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit OE-spec parts for simple bolt-on replacement\u003c\/li\u003e\n  \u003cli\u003eTypical tools: wrench set, tie rod separator or pickle fork, torque wrench\u003c\/li\u003e\n  \u003cli\u003ePlan to recheck alignment and torque settings after road or trail testing\u003c\/li\u003e\n  \u003cli\u003eFollow safety practices: jack stands, chocked wheels, and manufacturer torque specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality and warranty support comes with the Gledewen kit?\u003c\/h3\u003e\n\u003cp\u003eGledewen supplies this kit as a new aftermarket replacement built to meet OEM dimensions while keeping the price low. Each set is inspected to provide reliable service life under normal operating conditions, and the purchase includes a warranty window for replacement or refund if issues arise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to OE fit standards for a factory-like appearance and fit\u003c\/li\u003e\n  \u003cli\u003eDurable materials and vehicle try-on testing for dependable performance\u003c\/li\u003e\n  \u003cli\u003eBacked by a 24-month warranty for replacement or refund support\u003c\/li\u003e\n  \u003cli\u003eFactory-direct pricing delivers value compared with OEM parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Gledewen Tie Rod Ends Kit is intended for ATV owners and mechanics who need an affordable, direct-fit replacement to restore steering precision on compatible Kawasaki Brute Force 650\/750 and Honda TRX models. It’s a practical choice for riders noticing steering looseness, uneven tire wear, or directional pull and who want a straightforward replacement kit that includes all the small hardware needed for a correct installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2010 Kawasaki Brute Force 750?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Gledewen kit lists compatibility with many 2008–2011 Brute Force 750 models; confirm your exact KVF model code before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include hardware needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — each kit contains two tie rods, four tie rod ends, cotter pins and jam nuts for a complete outer linkage replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587243638969,"sku":"B09SVZQ5J1","price":104.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-assembly-view_50da612c-dc6e-4468-b6d3-c614224f51a7.jpg?v=1790502489"},{"product_id":"gledewen-exterior-door-handle-set-for-1999-2007-chevy-gmc-cadillac-4-piece-steel-painted-finish","title":"Gledewen Exterior Door Handle Set for 1999–2007 Chevy\/GMC\/Cadillac – 4-Piece Steel, Painted Finish","description":"\u003cp\u003e\u003cstrong\u003eGledewen exterior door handle set replaces all four outer handles (two front with keyholes, two rear) for compatible 1999–2007 Chevrolet, GMC and Cadillac trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete outside handle kit gives you a direct-fit replacement when worn, broken, or faded factory handles cause frustration. Each piece is manufactured to match original equipment geometry and finish, so you can swap out failed handles quickly and restore smooth door operation and consistent exterior appearance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this handle set fit?\u003c\/h3\u003e\n\u003cp\u003eThese handles are engineered to fit a long list of GM trucks and SUVs from roughly 1999 through 2007. The listing includes Silverado, Sierra, Tahoe, Yukon, Suburban, Avalanche and Escalade models specified below, and multiple OE reference numbers are supported for exact matching.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet Silverado 1500\/2500\/3500 (1999–2007 variants listed)\u003c\/li\u003e\n  \u003cli\u003eChevrolet Tahoe\/Suburban and Avalanche (2000–2006 ranges)\u003c\/li\u003e\n  \u003cli\u003eGMC Sierra and Yukon series (1999–2007 variants listed)\u003c\/li\u003e\n  \u003cli\u003eCadillac Escalade models (2002–2006)\u003c\/li\u003e\n  \u003cli\u003eCompatible OE numbers: 15034985, 15034986, 15721571, 15721572, GM1520105, GM1521105, GM1310129, GM1311129, 77262, 77261, 80579, 80578\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen handles are built to OEM dimensions so you can install them without modifying the door. A basic set of hand tools and about 15–30 minutes per door is typically sufficient for a DIY swap, depending on vehicle access and experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: screwdriver set, trim panel tool, ratchet with sockets\u003c\/li\u003e\n  \u003cli\u003eAverage install time: ~15 minutes per door for experienced DIYers\u003c\/li\u003e\n  \u003cli\u003eNo cutting or drilling required — direct fit replacement\u003c\/li\u003e\n  \u003cli\u003eFront handles include keyholes for easy reusing of existing locks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes are used, and how durable are they?\u003c\/h3\u003e\n\u003cp\u003eGledewen manufactures these handles from high-grade steel with a protective painted finish so they resist rust and keep a consistent look with the vehicle exterior. The surfaces are upgraded to reduce fading and retain durability under normal use and weather exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from heavy-duty steel for structural strength\u003c\/li\u003e\n  \u003cli\u003ePainted finish to resist corrosion and UV fading\u003c\/li\u003e\n  \u003cli\u003eTested to meet factory operating parameters for smooth action\u003c\/li\u003e\n  \u003cli\u003eDesigned for long service life compared with worn OEM handles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the set include everything I need and is there warranty coverage?\u003c\/h3\u003e\n\u003cp\u003eThis kit contains four exterior handles: front right (passenger) with keyhole, front left (driver) with keyhole, rear right, and rear left. Gledewen backs the set with a 24-month warranty covering defects, so you can replace failed handles with support if issues arise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePacking list: 1 front right (keyhole), 1 front left (keyhole), 1 rear right, 1 rear left\u003c\/li\u003e\n  \u003cli\u003eNew condition — sold as a complete four-handle kit\u003c\/li\u003e\n  \u003cli\u003e2-year warranty for manufacturing defects and performance issues\u003c\/li\u003e\n  \u003cli\u003eContact seller for replacement or assistance via the platform messaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers and fleet owners of late‑1990s to mid‑2000s GM trucks and SUVs who need a reliable, cost-effective exterior handle replacement that matches OEM fit and finish. This Gledewen set is suited to DIY mechanics, body shops, and anyone restoring exterior trim on Silverado, Sierra, Tahoe, Yukon, Suburban, Avalanche or Escalade models seeking a straightforward swap and a durable result.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these handles fit my 2004 Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set lists compatibility with 1999–2006 Silverado 1500 models and includes matching OE part numbers for direct fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the front handles include keyholes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Both front left (driver) and front right (passenger) handles in the kit include keyholes for existing locks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587290431673,"sku":"B09T38RN5J","price":100.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-left-driver-side-handle.jpg?v=1790504565"},{"product_id":"gledewen-chrome-exterior-door-handles-for-1999-2007-chevy-silverado-front-pair-with-keyholes-oe-fit","title":"Gledewen Chrome Exterior Door Handles for 1999–2007 Chevy Silverado — Front Pair with Keyholes, OE-Fit","description":"\u003cp\u003e\u003cstrong\u003eGledewen two-piece chrome front exterior door handle set for driver and passenger side with keyholes—designed as direct OE-fit replacements for 1999–2007 Chevrolet, GMC and 2002–2006 Cadillac models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of gleaming chrome door handles replaces worn or broken front exterior handles on a wide range of full-size trucks and SUVs. Each set includes a right (passenger) and left (driver) front handle, both finished in upgraded chrome plating and fitted with keyholes for original functionality. They arrive new and match factory mounting points and part numbers, letting you restore function and appearance without modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these Gledewen handles fit?\u003c\/h3\u003e\n\u003cp\u003eThese handles are engineered to match original equipment geometry and fitment for many GM trucks and SUVs produced between 1999 and 2007. Compatibility covers Chevrolet Silverado, Tahoe, Suburban, Avalanche; GMC Sierra and Yukon families; and select Cadillac Escalade models—check the exact model years listed below before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Silverado 1500\/2500\/3500 (selected years), Tahoe, Suburban, Avalanche\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra 1500\/2500\/3500, Yukon, Yukon XL (selected years)\u003c\/li\u003e\n  \u003cli\u003eCadillac: Escalade, Escalade ESV, Escalade EXT (2002–2006)\u003c\/li\u003e\n  \u003cli\u003eReplacement part numbers: 15034985, 15034986, GM1310129, GM1311129, 77262, 77261\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these handles compare to OEM parts?\u003c\/h3\u003e\n\u003cp\u003eGledewen handles are made to mirror original fit and function while offering an enhanced chrome finish. They install in the factory locations and use the same mounting points, so no drilling or trimming is required. The chrome plating is upgraded to resist oxidation and preserve shine longer than typical aftermarket finishes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit geometry matching factory handles\u003c\/li\u003e\n  \u003cli\u003eUpgraded chrome plating for higher gloss and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eComes with keyholes for original locking functionality\u003c\/li\u003e\n  \u003cli\u003eInstalls in about 15 minutes per door with basic tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included and what condition are the handles in?\u003c\/h3\u003e\n\u003cp\u003eThe package contains two brand-new front exterior chrome handles: one driver-side and one passenger-side, each with a keyhole. These are supplied as complete outside handles ready to bolt into place, so you don’t need extra trim pieces to begin the swap. All items are shipped in new condition and intended as direct replacements for the listed OE part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x left (driver) front chrome exterior handle with keyhole\u003c\/li\u003e\n  \u003cli\u003e1x right (passenger) front chrome exterior handle with keyhole\u003c\/li\u003e\n  \u003cli\u003eNew condition, packaged for installation\u003c\/li\u003e\n  \u003cli\u003eCompatible with specified Chevy, GMC, and Cadillac models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installation require tools or modifications?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and typically requires only hand tools and access to the inner door panel. Because these handles are designed as OE-style replacements, no cutting, reshaping, or permanent vehicle changes are needed. If you have the factory service manual or basic mechanical experience, the swap is a quick maintenance task.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses factory mounting points—no modifications required\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools recommended (screwdrivers, socket set)\u003c\/li\u003e\n  \u003cli\u003eEstimated install time: roughly 15 minutes per door for experienced mechanics\u003c\/li\u003e\n  \u003cli\u003eWorks with existing locks and linkages when reassembled correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Gledewen chrome handle set is ideal for owners restoring appearance and function on late-1990s to mid-2000s GM trucks and SUVs. It suits DIY mechanics, professional technicians, and anyone replacing faded or damaged exterior handles while keeping an OEM look with a brighter chrome finish. If you need a direct-fit replacement with keyholes and longer-lasting shine, this set is made to match those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these handles fit my 2003 Chevy Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Gledewen chrome handles are compatible with 1999–2006 Silverado 1500 models, including 2003, as direct-fit replacements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the keyholes functional and included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each handle in the set includes a functional keyhole designed to work with existing lock hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587290398905,"sku":"B0B6HWW2LW","price":98.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-chrome-front-driverside-handle.jpg?v=1790504566"},{"product_id":"gledewen-door-lock-actuator-motor-front-left-driver-side-for-toyota-lexus-scion-direct-fit-oe-connector-quiet-durable","title":"Gledewen Door Lock Actuator Motor Front Left (Driver Side) for Toyota\/Lexus\/Scion — Direct-Fit OE Connector, Quiet Durable","description":"\u003cp\u003e\u003cstrong\u003eGledewen front left (driver side) door lock actuator is a direct-fit replacement motor that restores power locking on compatible Toyota, Lexus and Scion vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your driver-side door no longer locks or unlocks with the key fob or interior switch, a failed latch actuator is a common cause. This Gledewen unit is built to OE dimensions and electrical connectors so it installs without modification and brings back secure remote and manual locking operation. It replaces multiple original part numbers used across a range of Toyota, Lexus and Scion models.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this actuator fix intermittent or non-working door locks?\u003c\/h3\u003e\n\u003cp\u003eThe actuator contains an electric motor and gear assembly that moves the latch when the lock command is sent. Replacing a worn or burnt-out actuator re-establishes the mechanical movement needed for the door to lock and unlock reliably. You may notice quieter operation and consistent responsiveness after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OE-style connector for plug-and-play replacement\u003c\/li\u003e\n  \u003cli\u003eElectro-mechanical motor and reinforced plastic housing for durability\u003c\/li\u003e\n  \u003cli\u003eTested to ensure consistent actuation and motor performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and OE numbers does this part replace?\u003c\/h3\u003e\n\u003cp\u003eThis front left actuator fits many Toyota, Lexus and Scion models—commonly used in 4Runner, Camry, Tundra, Sequoia, Corolla, Highlander, RAV4 and several Lexus IS\/GS\/LS\/RX variants. It replaces original numbers such as 69040-0C050, 69040-06180 and 931-401 among others for cross-compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible model years include 2006–2019 across multiple Toyota platforms\u003c\/li\u003e\n  \u003cli\u003eAlso fits Lexus models like IS250\/IS350, LS460 and RX450h within listed years\u003c\/li\u003e\n  \u003cli\u003eCross-replaces part numbers: 69040-06180, 69040-0C050, 931401, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build features and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe actuator uses reinforced plastics and an electric motor matched to OE specifications to resist wear and provide stable performance. A precise connector and form-fit shape minimize installation errors and reduce the risk of electrical problems. The design balances strength with smooth, low-noise movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced plastic housing for longer service life\u003c\/li\u003e\n  \u003cli\u003eElectro-mechanical exterior latch release for efficient operation\u003c\/li\u003e\n  \u003cli\u003eOE-style connector to ensure a firm electrical connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the Gledewen actuator?\u003c\/h3\u003e\n\u003cp\u003eGledewen backs this actuator with a 12-month warranty for replacement or refund if the part fails under normal use. Technical fitment guidance and vehicle compatibility details are provided to help confirm correct selection before purchase. The warranty gives added confidence in replacement reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty: replacement or refund\u003c\/li\u003e\n  \u003cli\u003ePre-sale fitment information to confirm compatibility\u003c\/li\u003e\n  \u003cli\u003eQuality testing performed to validate motor operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This actuator is intended for DIYers and professional mechanics replacing a faulty front left (driver side) door lock motor on supported Toyota, Lexus or Scion vehicles. Choose it if you need a direct-fit part that follows OE dimensions and electrical connections, want improved latch responsiveness, and prefer backed warranty coverage for peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this actuator fit my 2012 Toyota Camry?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this front left actuator is listed for many 2007–2017 Camry models; confirm with your VIN and OE number cross-reference.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this myself without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools and door panel removal skills are required; the OE-style plug allows straightforward electrical connection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587292528825,"sku":"B07QH18V3Z","price":94.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-left-actuator-packaging.jpg?v=1790504643"},{"product_id":"gledewen-spare-tire-hoist-for-1994-2002-dodge-ram-1500-2500-3500-reinforced-steel-manual-winch","title":"Gledewen Spare Tire Hoist for 1994–2002 Dodge Ram 1500\/2500\/3500 — Reinforced Steel Manual Winch","description":"\u003cp\u003e\u003cstrong\u003eThe Gledewen Spare Tire Hoist 924-541 is a heavy-duty winch assembly designed to securely store and lower the full-size spare wheel under 1994–2002 Dodge Ram pickups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a reliable, OEM-fit solution to carry and access your spare tire without crawling under the truck, this hoist assembly provides a boltable winch, offset cable, and crank rod for smooth raising and lowering. Built from reinforced steel and finished to resist corrosion, the kit replaces factory part numbers 924-541, 52058707, 140141 and DOR924-541 for Dodge Ram 1500, 2500 and 3500 models listed below.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this spare tire hoist attach and operate?\u003c\/h3\u003e\n\u003cp\u003eThe hoist is a universal bolt-on winch style designed to mount to the vehicle's frame where the OEM carrier sits. Operation is manual: thread the cable through the wheel center, hook or secure it to the winch, then turn the included crank rod to lift or lower the tire. For first use, the winch is preset—do not attempt to raise it prior to mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolts directly to frame in OEM location for a precise fit.\u003c\/li\u003e\n  \u003cli\u003eManual crank rod raises and lowers the offset cable and tire.\u003c\/li\u003e\n  \u003cli\u003ePre-set winch; follow installation notes to avoid jamming on descent.\u003c\/li\u003e\n  \u003cli\u003eWorks only when loaded—lower manually if no weight is attached.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Dodge Ram model and which part numbers match?\u003c\/h3\u003e\n\u003cp\u003eThis assembly fits a wide range of two- and three-quarter-ton Dodge Rams made in the mid-1990s through early 2000s. It matches common OEM numbers so you can replace a worn or missing hoist with the correct specification and mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 1994–2001 Dodge Ram 1500 (all styles).\u003c\/li\u003e\n  \u003cli\u003eFits 1994–2002 Dodge Ram 2500 and 3500 (all styles).\u003c\/li\u003e\n  \u003cli\u003eCompatible OEM part numbers: 924-541, 52058707, 140141, DOR924-541.\u003c\/li\u003e\n  \u003cli\u003eSold as a complete cable and winch crank lift assembly (1 piece).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does the hoist include?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen hoist is made from thickened, reinforced steel components engineered for higher tensile strength and long service life. The design reduces common failure points like cable fray and frame deformation, and protects the mechanism from rust when installed properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced steel construction for improved tensile strength.\u003c\/li\u003e\n  \u003cli\u003eFinished to resist corrosion and wear under the vehicle.\u003c\/li\u003e\n  \u003cli\u003eBuilt to withstand regular lowering and lifting of a full-size spare.\u003c\/li\u003e\n  \u003cli\u003eSimple mechanical design for easy maintenance and replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I watch out for?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable working beneath a truck, and typically takes about 30 minutes using basic hand tools. Bolt the winch assembly in place, thread and secure the offset cable through the spare, and test the crank operation while monitoring alignment and cable seating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExpect about 30 minutes for typical installation with basic tools.\u003c\/li\u003e\n  \u003cli\u003eDo not raise the winch prior to first use—unit ships preset.\u003c\/li\u003e\n  \u003cli\u003eAvoid idling the winch on descent to prevent jamming.\u003c\/li\u003e\n  \u003cli\u003eIf tire weight is absent, lower carefully by hand to avoid binding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers, fleet managers, and DIY truck owners who own 1994–2002 Dodge Ram 1500, 2500 or 3500 pickups and want a durable, OEM-compatible spare tire carrier replacement. This hoist suits anyone replacing a damaged carrier, restoring a vehicle to serviceable condition, or upgrading a corroded or seized factory winch. The Gledewen unit is sold new as one spare tire wheel cable and hoist crank lift winch assembly and backed by a 24-month warranty for replacement or refund support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hoist fit 2002 Dodge Ram 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Gledewen hoist fits 1994–2001 Ram 1500 and 1994–2002 Ram 2500\/3500 models only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What do I get in the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One spare tire wheel cable and hoist crank lift winch assembly, ready to bolt into the OEM location.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587296428217,"sku":"B0D44S8GHJ","price":114.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-hoist-front-assembly.jpg?v=1790504793"},{"product_id":"gledewen-pcv-valve-oil-separator-for-audi-vw-06k103495-single-unit-direct-fit-replacement","title":"Gledewen PCV Valve Oil Separator for Audi \u0026 VW 06K103495 Single Unit Direct-Fit Replacement","description":"\u003cstrong\u003eThe Gledewen 06K103495 PCV valve is a direct-fit engine crankcase ventilation oil separator designed to replace OEM 06K013495AA\/06K103495AT and restore correct crankcase venting on compatible Audi and Volkswagen 1.8T\/2.0T engines.\u003c\/strong\u003e\n\n\u003cp\u003eThis replacement PCV (positive crankcase ventilation) oil separator is manufactured from durable PVC to meet OEM fit and function for a range of Audi and Volkswagen models from 2014–2018. It ships as a single complete vent valve, tested under quality controls to ensure stable performance and straightforward installation. If your factory valve shows oil leaks, clogging, or erratic venting, this direct-replacement part offers an affordable way to return your engine’s breather system to proper operation.\u003c\/p\u003e\n\n\u003ch3\u003eWill this PCV valve fit my Audi or Volkswagen model?\u003c\/h3\u003e\n\u003cp\u003eCompatibility covers many common 1.8T and 2.0T gasoline engines used across several model years. Confirm by checking your current part number against the listed OEM cross-references before purchase to ensure an exact match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM numbers: 06K103495 \/ 06K013495AA \/ 06K103495AT and related variants.\u003c\/li\u003e\n  \u003cli\u003eVolkswagen coverage: 2015–2018 Golf (including GTI and SportWagen), Alltrack, 2014–2018 Jetta, Passat, Beetle.\u003c\/li\u003e\n  \u003cli\u003eAudi coverage: 2015–2018 A3 (incl. Cabriolet\/Quattro), 2016–2018 A4\/A6\/A7, 2016–2018 Q3\/Q7, 2016–2018 TT, and 2017–2018 A5.\u003c\/li\u003e\n  \u003cli\u003eAlways compare old part photos and numbers to confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install this replacement oil separator?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen valve is engineered as a direct swap for the original unit, which simplifies replacement for a DIYer or technician. Installation typically requires only basic hand tools and removal of the old vent, followed by seating the new valve and reconnecting hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement design—matches OEM connection points and mounting.\u003c\/li\u003e\n  \u003cli\u003eSimple hose and clip reinstallation—no special adapters required.\u003c\/li\u003e\n  \u003cli\u003eRecommended: inspect associated hoses and seals while replacing for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance differences should I expect after replacing the PCV valve?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or clogged PCV oil separator helps restore intended crankcase ventilation and reduces oil contamination of intake components. While results depend on overall engine condition, users commonly see reduced oil seepage around intake areas and a return toward normal crankcase pressure behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps limit oil blow-by into the intake tract and intercooler systems.\u003c\/li\u003e\n  \u003cli\u003eReduces the chance of vacuum-related leaks or oil leaks near the valve cover.\u003c\/li\u003e\n  \u003cli\u003eEngine breathes as designed when the venting path is clear and sealed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about durability and warranty?\u003c\/h3\u003e\n\u003cp\u003eThis PCV valve is produced under controlled quality standards from PVC material and is intended as a long-lasting replacement matching OEM performance. Gledewen backs the product with a 12-month warranty against manufacturing defects and offers customer support for replacement or refund if problems arise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from durable PVC to resist typical engine bay conditions.\u003c\/li\u003e\n  \u003cli\u003eManufacturing and bench testing performed to ensure consistent function.\u003c\/li\u003e\n  \u003cli\u003e12-month warranty covers defects; contact seller for replacement or refund.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technically minded owners, independent mechanics, and service shops working on 2014–2018 Audi and Volkswagen 1.8T\/2.0T gasoline engines who need a reliable, OEM-compatible PCV oil separator are the primary audience. It’s suitable for anyone replacing a leaking, clogged, or aged crankcase vent valve who wants a direct-fit part that reinstates factory venting function without modifying hoses or mounting points.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace part number 06K013495AA?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Gledewen PCV valve replaces OEM 06K013495AA plus several 06K103495 variants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with a 2016 Audi A4 2.0T?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible: the valve fits Audi A4 2.0T models from 2016–2018 per the listed coverage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587301834937,"sku":"B0D3PT6VH2","price":94.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-pcv-valve-front-view.jpg?v=1790505046"},{"product_id":"gledewen-power-window-lift-motor-for-mazda-3-5-6-cx-7-cx-9-rx-8-remanufactured-direct-fit-increased-torque-quiet-operation","title":"Gledewen Power Window Lift Motor for Mazda 3\/5\/6\/CX-7\/CX-9\/RX-8 — Remanufactured Direct-Fit, Increased Torque, Quiet Operation","description":"\u003cp\u003e\u003cstrong\u003eGledewen Power Window Lift Motor is a remanufactured, OEM-fit replacement motor engineered to restore reliable power-window operation for compatible Mazda models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Mazda’s window is slow, noisy, or won’t move, this Gledewen lift motor is rebuilt and tested to meet or exceed the original factory performance. Gledewen analyzes common failure modes from the OE unit and reinforces weak points, then subjects each motor to computer testing both as components and as complete assemblies. The result is a high-value replacement that aims to deliver smooth window travel, improved torque, and long-term dependability backed by a 24-month warranty.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this motor restore my window’s performance?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen motor is manufactured to match OEM fit, form, and function so it pairs directly with the existing regulator and glass path. It supplies higher starting torque to overcome worn mechanisms while the precision gearing reduces vibration and noise. Computer testing ensures each unit operates within performance tolerances before shipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for the specified Mazda doors—no modification required\u003c\/li\u003e\n  \u003cli\u003eReinforced materials and upgraded torque to reduce stalling\u003c\/li\u003e\n  \u003cli\u003eQuiet gear engagement for smoother up\/down travel\u003c\/li\u003e\n  \u003cli\u003ePre-shipment electrical and load testing for consistent operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Mazda models and door positions does it fit?\u003c\/h3\u003e\n\u003cp\u003eThis lift motor serves several Mazda model years and specific door locations; confirm the correct side and year for proper compatibility. It replaces the listed OE part numbers and is intended for both front and rear positions where noted in compatibility. Always verify fit by comparing the original part number or consulting a mechanic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMazda 3 (2004–2009): Front Left \u0026amp; Rear Right\u003c\/li\u003e\n  \u003cli\u003eMazda 5 (2006–2015): Front Left \u0026amp; Rear Left\u003c\/li\u003e\n  \u003cli\u003eMazda 6 (2003–2008): Front Left \u0026amp; Rear Right\u003c\/li\u003e\n  \u003cli\u003eMazda CX-7 (2007–2012), CX-9 (2007–2015), RX-8 (2004–2011) specific door listings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key features and reliability assurances?\u003c\/h3\u003e\n\u003cp\u003eGledewen focuses on correcting OE unit weaknesses, using reinforced components and updated motor torque to extend lifespan. Each motor undergoes component-level and full-unit computer testing to validate electrical operation and mechanical durability. A 24-month warranty covers manufacturing defects, giving added confidence after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-equivalent fit for proper integration with regulators\u003c\/li\u003e\n  \u003cli\u003eReinforced construction to resist premature wear\u003c\/li\u003e\n  \u003cli\u003eComprehensive testing of sub-assemblies and final units\u003c\/li\u003e\n  \u003cli\u003e24-month warranty for replacement or refund if defects occur\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with door panel removal and window regulator assembly, but professional installation is recommended if you lack experience. Before ordering, compare your existing part number to the supplied replacement numbers and confirm door position, model year, and connector style. Keep replacement hardware and window alignment tools on hand to ensure proper fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare OE numbers: GJ6A5958XF, G22C5958XC, D6515958XB, 742-801\u003c\/li\u003e\n  \u003cli\u003eVerify vehicle year and door (front\/rear, left\/right) compatibility\u003c\/li\u003e\n  \u003cli\u003eHave basic tools ready: panel clips, trim tools, and torque driver\u003c\/li\u003e\n  \u003cli\u003eConsider professional installation for complex regulator setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Gledewen power window lift motor fits Mazda owners, independent mechanics, and repair shops seeking an economical, remanufactured alternative to new OEM parts. It is ideal for drivers experiencing slow or non-functioning windows on compatible model years who want a tested replacement that balances cost and durability, backed by a two-year warranty and manufacturer support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace part GJ6A5958XF?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Gledewen lift motor is a direct replacement for GJ6A5958XF and equivalent OE numbers listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers this motor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The motor includes a 24-month warranty covering defects with replacement or refund options.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587323986105,"sku":"B07P94NZ3L","price":85.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-packaging-motor.jpg?v=1790506017"},{"product_id":"gledewen-rear-driver-side-door-wiring-harness-for-2009-2014-ford-f-150-crew-cab-direct-fit-moisture-resistant","title":"Gledewen Rear Driver Side Door Wiring Harness for 2009–2014 Ford F-150 Crew Cab — Direct-Fit, Moisture-Resistant","description":"\u003cp\u003e\u003cstrong\u003eGledewen's Rear Driver Side Door Wiring Harness is a direct-fit replacement jumper assembly engineered to restore reliable electrical and door-ajar functions on 2009–2014 Ford F-150 Crew Cab trucks (excluding rear heated seats).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the harness between your rear driver door and cab has become frayed, cracked, or intermittently failing, this OE-style replacement brings back solid connectivity and protects circuits from moisture and abrasion. The package includes one rear driver side door jumper wire assembly built to match the original fit and function, with compatible part numbers 9L3Z-14631-CAA and 9L3Z14631CAA. This unit is intended for Crew Cab models from 2009 through 2014 and is not compatible with Ford F-150s equipped with rear heated seats.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this wiring harness affect my truck’s door and electrical behavior?\u003c\/h3\u003e\n\u003cp\u003eReplacing a tired or damaged jumper harness eliminates intermittent power and sensor failures caused by broken conductors or compromised insulation. Once installed, it stabilizes signals for door ajar indicators, power windows, and any door-mounted electronics on the rear driver side.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores consistent power and signal transmission to rear driver door components.\u003c\/li\u003e\n  \u003cli\u003eHelps stop false door-ajar warnings and sporadic accessory behavior.\u003c\/li\u003e\n  \u003cli\u003eSeals and insulation resist moisture and corrosion to extend service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and how long will it take?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen harness is a direct-fit part manufactured to match OE dimensions, so installation is straightforward for someone with basic vehicle maintenance experience. Typical replacement can be completed in about 30 minutes using standard hand tools; however, those unfamiliar with door panel removal should allow extra time or consult a technician.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design avoids splicing or wire modifications.\u003c\/li\u003e\n  \u003cli\u003eStandard fasteners and clips—no special tools required for most installations.\u003c\/li\u003e\n  \u003cli\u003eEstimated time: approximately 30 minutes for a competent DIYer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protections does this harness provide?\u003c\/h3\u003e\n\u003cp\u003eThis assembly uses quality conductors and durable protective sheathing to withstand repeated flexing between the door and body. Materials are chosen for resistance to abrasion, heat, oxidation, and water intrusion, improving long-term reliability in daily driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium core wiring for stable electrical transmission.\u003c\/li\u003e\n  \u003cli\u003eRetractable rubber boot and insulating layers for abrasion and moisture resistance.\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist corrosion, heat, and compression from repeated door cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: If you own a 2009–2014 Ford F-150 Crew Cab (without rear heated seats) and are experiencing flickering door functions, false door-ajar alerts, or visible wiring damage where the rear driver door meets the cab, this replacement jumper harness is built to restore factory-style performance. It’s aimed at DIY owners and independent technicians seeking an affordable, OE-spec unit that installs cleanly and carries a 24-month warranty for added peace of mind. The product ships as one rear driver side door jumper wire assembly and is supplied new, ready for immediate installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this harness compatible with heated rear seats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This harness is NOT compatible with F-150 models that have the rear heated seat option.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the warranty period for this Gledewen harness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Gledewen provides a 24-month warranty with replacement or refund options through support.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587467346105,"sku":"B0D7C7BMQM","price":100.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-rear-driver-door-harness-front-view.jpg?v=1790509081"},{"product_id":"gledewen-door-seal-for-1988-2000-chevy-gmc-c-k1500-3500-tahoe-yukon-left-right-oe-fit-drip-rail-weatherstripping","title":"Gledewen Door Seal for 1988–2000 Chevy GMC C\/K1500–3500 \u0026 Tahoe Yukon — Left\/Right OE-Fit Drip Rail Weatherstripping","description":"\u003cp\u003e\u003cstrong\u003eGledewen front door frame drip rail weather stripping is a direct-fit replacement rubber seal engineered to restore a tight, quiet, and water-resistant door edge for 1988–2000 Chevy and GMC trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eOver time the original U-shaped door edge trim can crack, compress, or lose its clips, leaving doors vulnerable to water, wind noise, and road dirt. This pair of left and right black driver and passenger side door frame drip rail seals is made to match OE geometry and snap into the body-mounted channel without glue, giving you a fast repair that behaves like the factory part. The seals are sold new, come as a left\/right set, and cover a long list of Chevy, GMC, and Cadillac vehicles from the late 1980s through 2000.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this Gledewen seal fit?\u003c\/h3\u003e\n\n\u003cp\u003eThis replacement is compatible with many C\/K, Suburban, Tahoe, Yukon, Blazer and Escalade models built between 1988 and 2000. It matches multiple OE references so you can confirm fit by cross-checking with your vehicle’s existing part number.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits 1988–1999 Chevrolet \u0026amp; GMC C1500\/K1500, 1988–2000 C2500\/C3500, K2500\/K3500\u003c\/li\u003e\n  \u003cli\u003eCompatible with 1992–1999 Suburban (C\/K models), 1995–1999 Tahoe\/Yukon, 1999–2000 Cadillac Escalade\u003c\/li\u003e\n  \u003cli\u003eCross-reference numbers included: 1AWSK00228, AM-35015073, 15758703, 15766539, GM1390104, GM1590111, 15956393, 15956394, 15973659, and others\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this weather stripping installed and what tools are needed?\u003c\/h3\u003e\n\n\u003cp\u003eThe design is push-on body-mounted trim that installs without adhesives. The internal U-profile and built-in metal clips align with the factory channel so the seal snaps into place for a secure hold.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNo adhesive required — press-fit onto the door frame channel\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools (trim pry or flat screwdriver) may help remove old seal clips\u003c\/li\u003e\n  \u003cli\u003eInstallation is reversible and serviceable for door panel or latch access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect after replacing worn seals?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing degraded rubber trim restores drainage control, reduces wind noise, and helps keep moisture and road grime from entering the door cavity. The rubber compound also tolerates temperature extremes and resists compression set so it maintains a reliable seal.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eImproved water shedding at the drip rail and fewer interior leaks\u003c\/li\u003e\n  \u003cli\u003eLower wind and road noise for a quieter cabin\u003c\/li\u003e\n  \u003cli\u003eDurable rubber resists heat, cold, and repeated door cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes Gledewen’s door seal different from cheap aftermarket strips?\u003c\/h3\u003e\n\n\u003cp\u003eThis product is manufactured to match OE dimensions and includes an ergonomically profiled U-shape with internal fastening clips and a sponge-style rubber compression tube. The factory testing and precise fit reduce trimming or modification during installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOE-spec profile for direct replacement and correct alignment\u003c\/li\u003e\n  \u003cli\u003eBuilt-in metal clip structure improves retention in the mounting channel\u003c\/li\u003e\n  \u003cli\u003eFactory-tested rubber compound with better longevity than generic trims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement seal is intended for owners or technicians of late‑model classic Chevrolet, GMC, and Cadillac trucks and SUVs who need an accurate, economical repair for leaky or noisy doors. It’s ideal if you want a factory-like restoration without professional rework — whether you’re maintaining a daily driver, restoring a weekend project, or prepping a vehicle for resale. Each order includes one black front left (driver) and one black front right (passenger) door frame drip rail weather stripping, sold new with a 24-month warranty through the seller for replacement or refund if you’re not satisfied.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePacking list:\u003c\/em\u003e 1 x black front left driver side door frame drip rail weather stripping; 1 x black front right passenger side door frame drip rail weather stripping. Condition: new.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this seal require adhesive to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The Gledewen seal is a push-on body-mounted trim with internal clips and installs without glue.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 1998 Chevrolet C1500 regular cab?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This set includes front left and right seals compatible with 1988–1999 C1500 models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587494019257,"sku":"B0CNYJ3VN2","price":116.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-packaging-seal.jpg?v=1790510293"},{"product_id":"gledewen-power-window-lift-motor-front-left-driver-for-nissan-350z-infiniti-g35-remanufactured-oem-fit-24-month-warranty","title":"Gledewen Power Window Lift Motor Front Left (Driver) for Nissan 350Z \u0026 Infiniti G35 — Remanufactured OEM Fit, 24‑Month Warranty","description":"\u003cp\u003e\u003cstrong\u003eGledewen front left (driver side) power window lift motor restores reliable window operation for 2003–2009 Nissan 350Z and 2003–2007 Infiniti G35 2-door coupes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis remanufactured window lift motor is rebuilt to match OEM fit and performance while correcting common failure points found in original units. Each motor receives component-level inspection and computer bench testing to verify torque, electrical draw, and full assembly function. The result is a drop-in replacement that aims to deliver smooth travel, correct speeds, and extended service life compared with worn original parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this motor fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe motor is made to directly replace the factory front left (driver side) window lift motor on compatible models. It matches the electrical connector, mounting points, and regulator interface so no modification is required for proper installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2003–2009 Nissan 350Z and 2003–2007 Infiniti G35 2-door coupe\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers 80731-CD00A, 80731CD00A, 742-511\u003c\/li\u003e\n  \u003cli\u003eEngineered for direct bolt-on replacement and stock regulator fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat improvements does this remanufactured motor offer over a worn OEM unit?\u003c\/h3\u003e\n\u003cp\u003eGledewen examines common OE failure modes and strengthens weak points during remanufacture. Upgrades focus on durable materials and improved torque delivery so the motor handles heavier regulator friction and intermittent lubrication better than an aged original.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced components to resist premature wear\u003c\/li\u003e\n  \u003cli\u003eHigher-torque motor assembly for consistent window travel\u003c\/li\u003e\n  \u003cli\u003eComprehensive testing of sub-assemblies and final units to ensure reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward and what should I expect after fitting?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same steps as replacing the factory motor—remove the door panel, detach the old motor from the regulator, swap in the Gledewen unit, and reconnect the wiring. After installation you should notice smoother movement and correct speed; occasional calibration (full up\/down cycles) may be recommended to set the regulator path.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard door-panel removal; no special tools required beyond basic hand tools\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play electrical connector and mounting points\u003c\/li\u003e\n  \u003cli\u003ePerform full up\/down window cycles after install to align regulator travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support are included if something goes wrong?\u003c\/h3\u003e\n\u003cp\u003eThe product ships with a 24-month warranty covering defects in materials and workmanship. Gledewen offers customer support for troubleshooting, replacement, or refund through the seller contact channel if any covered issue arises during the warranty period.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24-month warranty for peace of mind\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for replacement or refund claims\u003c\/li\u003e\n  \u003cli\u003eQuality control includes computer bench testing before shipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and DIY mechanics who own a Nissan 350Z (2003–2009) or a 2003–2007 Infiniti G35 2-door coupe and need a dependable, OEM-compatible replacement for a failing driver-side window motor. It’s ideal for anyone wanting a cost-effective remanufactured part that aims to improve longevity and restore smooth window operation without modifying the door hardware.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this motor fit my 2005 Nissan 350Z?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This front left motor is compatible with Nissan 350Z models from 2003 through 2009.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the warranty period for the Gledewen motor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The motor includes a 24-month warranty covering defects and workmanship.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587507028153,"sku":"B089Y498WJ","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-left-motor-packaging.jpg?v=1790510958"},{"product_id":"gledewen-center-console-armrest-lid-2014-2020-chevy-silverado-tahoe-oem-fit-leather-pattern-memory-foam","title":"Gledewen Center Console Armrest Lid — 2014–2020 Chevy Silverado\/Tahoe, OEM-fit Leather-Pattern \u0026 Memory Foam","description":"\u003cp\u003e\u003cstrong\u003eGledewen's replacement center console armrest lid is a direct-fit, leather-patterned cover that restores comfort and appearance to compatible 2014–2020 Chevy, GMC, Yukon and Cadillac consoles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your factory console lid is cracked, worn or no longer closes smoothly, this aftermarket Gledewen armrest lid offers a quick and reliable replacement engineered to match original equipment dimensions. Designed for a snug OEM-style fit, the lid uses durable materials and soft memory-foam padding to improve comfort while preserving factory look and function. It ships new and includes a 36-month warranty for added peace of mind.\u003c\/p\u003e\n\n\u003ch3\u003eWill this armrest lid fit my truck or SUV?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is based on specific model years and OE part correspondence; this lid is intended for a defined set of Chevrolet, GMC and Cadillac vehicles from 2014–2020. Always verify your vehicle's year, make and model against the compatibility list and check OE number 22881398 if you want an exact match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Chevy Silverado 1500 (2014–2018), 1500 LD (2019), 2500\/3500 HD (2015–2019), Suburban (2015–2018), Tahoe (2015–2020).\u003c\/li\u003e\n  \u003cli\u003eFits GMC Sierra 1500 (2014–2018), 1500 Limited (2019), 2500\/3500 HD (2015–2019), Yukon\/Yukon XL (2015–2020).\u003c\/li\u003e\n  \u003cli\u003eFits Cadillac Escalade and Escalade ESV (2015–2020 ranges listed).\u003c\/li\u003e\n  \u003cli\u003eReplacement OE number: 22881398 — confirm against your vehicle's parts tag for an exact fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install the replacement armrest lid?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the original equipment layout and requires no special tools, making it accessible for most DIYers. The lid is dimensioned to the OEM standard so it snaps into place and replaces the worn part in minutes, restoring the center console’s function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-style dimensions for a precise, tool-free swap.\u003c\/li\u003e\n  \u003cli\u003eTypical install time: about 15 minutes for most models.\u003c\/li\u003e\n  \u003cli\u003eApplication-specific design to align with existing hinges and latches.\u003c\/li\u003e\n  \u003cli\u003eNo trimming or modification required when matched to the correct vehicle list.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and comfort improvements does this lid provide?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen armrest lid uses a leather-patterned exterior and soft memory-foam internal padding to deliver a more comfortable contact surface and a refreshed interior look. The construction emphasizes durability to resist everyday wear while helping reduce rattles and unwanted movement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLeather-patterned finish for a factory-matched appearance.\u003c\/li\u003e\n  \u003cli\u003eSoft memory foam padding improves arm support on long drives.\u003c\/li\u003e\n  \u003cli\u003eQuality manufacturing with multi-point inspection to ensure consistency.\u003c\/li\u003e\n  \u003cli\u003eSoft-close characteristics to minimize noise and movement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with this replacement part?\u003c\/h3\u003e\n\u003cp\u003eGledewen backs this armrest lid with a 36-month warranty that covers manufacturing defects and failure under normal use. If the part fails, cracks, or has other covered issues, contact Gledewen through the sales channel for assistance and warranty service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e36-month limited warranty included with purchase.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available through the original sales channel for claims.\u003c\/li\u003e\n  \u003cli\u003eRepair or replacement options provided when coverage applies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: drivers and fleet owners who need a dependable, OEM-style repair for a worn or damaged center console lid in compatible Chevy, GMC, Yukon or Cadillac models. It’s ideal for anyone wanting to restore interior aesthetics, regain lost comfort from a collapsed armrest, or replace a broken lid quickly without custom modifications. If you require a precise OE fit and a long warranty, this Gledewen lid is built to meet those expectations.\u003c\/p\u003e\n\n\u003cp\u003ePacking list: 1x leather-patterned front seat center console armrest lid. Before purchase, verify your vehicle YEAR\/MAKE\/MODEL and match OE number 22881398. If unsure, search the store by model or OE number for alternate options.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this lid fit my 2017 Chevy Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Gledewen's lid fits Chevy Silverado 1500 models from 2014–2018. Verify your OE number 22881398 to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Installation typically takes about 15 minutes and needs no special tools when matched to the correct vehicle.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587527475385,"sku":"B0FDWV11HN","price":112.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-view-armrest-lid.jpg?v=1790511991"},{"product_id":"gledewen-spare-tire-hoist-winch-carrier-for-ford-f-150-f-250-1997-2004-oem-fit-corrosion-resistant-steel","title":"Gledewen Spare Tire Hoist Winch Carrier for Ford F-150\/F-250 (1997–2004) — OEM-fit, Corrosion-Resistant Steel","description":"\u003cp\u003e\u003cstrong\u003eGledewen's spare tire hoist is a direct-fit replacement winch carrier engineered to lift and lower the spare tire on compatible Ford F-150\/F-250 models and the 2002 Lincoln Blackwood.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your truck's factory spare tire hoist fails, a reliable replacement restores safe, smooth operation and prevents roadside hassles. This Gledewen winch carrier is built to OEM dimensions for a factory-like fit, made from surface-treated reinforced steel for increased corrosion resistance, and backed by a 24-month warranty. It replaces many original part numbers used on 1997–2003 Ford F-150s, 2004 F-150 Heritage, 1997–1999 F-250s, 1997 F-250 HD models, and the 2002 Lincoln Blackwood.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hoist fit my truck?\u003c\/h3\u003e\n\u003cp\u003eCompatibility follows the listed model years and original equipment part numbers. If your vehicle is within the covered years and used one of the replaced part numbers, this winch carrier should be a direct replacement offering the same mounting points and operation as the factory unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 1997–2003 Ford F-150 and 2004 F-150 Heritage\u003c\/li\u003e\n  \u003cli\u003eFits 1997–1999 Ford F-250 and 1997 F-250 HD\u003c\/li\u003e\n  \u003cli\u003eFits 2002 Lincoln Blackwood\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers such as 924-526, 1L3Z1A131AA, 2L3Z1A131AA and related OE codes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement winch carrier?\u003c\/h3\u003e\n\u003cp\u003eThe carrier is manufactured from reinforced steel with a surface treatment to resist corrosion and wear, so it lasts longer in road and weather exposure. It undergoes endurance testing to ensure rigidity and reliable operation under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface-treated reinforced steel construction\u003c\/li\u003e\n  \u003cli\u003eEngineered to OE specifications for proper load distribution\u003c\/li\u003e\n  \u003cli\u003eEndurance-tested for long-term dependability\u003c\/li\u003e\n  \u003cli\u003eBacked by a 24-month warranty for added confidence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward because the part follows original equipment dimensions; a mechanic or experienced DIYer can replace the winch carrier with basic hand tools. Once installed, the lifting and lowering action should be smooth and consistent, matching the factory behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design eliminates modification in most cases\u003c\/li\u003e\n  \u003cli\u003eMounting points and cable routing mirror factory layout\u003c\/li\u003e\n  \u003cli\u003eOperates with the existing spare tire crank or motor assembly\u003c\/li\u003e\n  \u003cli\u003eInspect cable and fasteners during installation for safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is covered by the Gledewen warranty?\u003c\/h3\u003e\n\u003cp\u003eThe product includes a 24-month warranty covering manufacturing defects and premature failures under normal use. Contact Gledewen customer support for replacement or refund options if you encounter problems within the warranty period.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24-month coverage for defects and workmanship\u003c\/li\u003e\n  \u003cli\u003eCustomer support channels available for service or returns\u003c\/li\u003e\n  \u003cli\u003eReplacement or refund provided when warranty conditions are met\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Gledewen spare tire hoist is aimed at owners of the specified Ford and Lincoln models who need a dependable, like-for-like replacement for a worn or broken spare tire winch. It suits DIY mechanics, professional shops, and truck owners who want a corrosion-resistant, OEM-dimensioned carrier that restores the original lifting function without modification. If you need a direct replacement to match factory mounting and operation, this hoist carrier is designed for that purpose and is supported by a two-year warranty for added peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which vehicles does this winch carrier replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces the spare tire hoist on 1997–2003 Ford F-150, 2004 F-150 Heritage, 1997–1999 F-250, 1997 F-250 HD, and 2002 Lincoln Blackwood.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What happens if the part fails after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Gledewen provides a 24-month warranty—contact customer support for replacement or refund if the product has manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587554934969,"sku":"B0883BKH8D","price":115.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-view-spare-tire-hoist.jpg?v=1790512544"},{"product_id":"gledewen-door-handle-set-for-1997-2001-toyota-camry-sedan-8-piece-smooth-black-exterior-beige-interior-oem-fit","title":"Gledewen Door Handle Set for 1997–2001 Toyota Camry Sedan — 8-Piece (Smooth Black Exterior, Beige Interior) OEM-Fit","description":"\u003cstrong\u003eFull eight-piece exterior and interior door handle set designed to replace worn or broken handles on 1997–2001 Toyota Camry sedans.\u003c\/strong\u003e\n\nThis complete kit from Gledewen includes four outside smooth-black handles (two with keyholes for the front doors) and four beige inside handles so you can restore all four doors in one straightforward job. Each piece is new, produced to match OEM fit and function, and listed with the part numbers Toyota owners commonly reference for a correct replacement. The set is intended for Camry CE, LE, and XLE 4-door models from 1997 through 2001.\n\n\u003ch3\u003eWill these handles fit my 1999 Toyota Camry sedan?\u003c\/h3\u003e\n\u003cp\u003eYes — the Gledewen set is made as a direct-fit replacement for Camry sedans across the 1997–2001 model years. Fitment covers CE, LE, and XLE trims, and the kit aligns with numerous OEM part numbers to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 1997–2001 Toyota Camry CE\/LE\/XLE 4-door sedans.\u003c\/li\u003e\n  \u003cli\u003eIncludes front outer handles with keyholes for driver and passenger sides.\u003c\/li\u003e\n  \u003cli\u003eMatches many OEM numbers such as 69220-33040 and 69210-33040 for verification.\u003c\/li\u003e\n  \u003cli\u003eShips as a full eight-piece set to replace all door handles at once.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is it to install the Gledewen door handle set?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be user-friendly and follows the original factory mounting points, so most mechanically inclined owners can replace a handle in under 30 minutes per door. No specialty tools are required beyond basic hand tools and a trim removal tool to avoid damage to panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design follows OEM mounting locations and clips.\u003c\/li\u003e\n  \u003cli\u003eTypical install time: about 15–30 minutes per door for experienced DIYers.\u003c\/li\u003e\n  \u003cli\u003eIncludes both inside and outside handles for complete door refresh.\u003c\/li\u003e\n  \u003cli\u003eReplace front handles with keyholes without modifying existing locks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and quality features can I expect?\u003c\/h3\u003e\n\u003cp\u003eGledewen builds these handles from durable plastics and finishes the exterior pieces in smooth black to match factory appearance. Parts undergo quality checks to ensure consistent operation and longevity under normal automotive use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExterior handles: smooth black finish to blend with original trim.\u003c\/li\u003e\n  \u003cli\u003eInterior handles: beige to match common OEM interior palettes.\u003c\/li\u003e\n  \u003cli\u003eManufactured to align with OEM specifications for fit and movement.\u003c\/li\u003e\n  \u003cli\u003eEach set sold new and inspected before shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about warranty and returns?\u003c\/h3\u003e\n\u003cp\u003eGledewen backs this door handle set with a 24-month warranty that covers functional failures under normal use. If a part arrives damaged or stops working within that warranty period, contact Gledewen customer support for assistance and replacement options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-year warranty on functional defects under normal use.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment or defect questions.\u003c\/li\u003e\n  \u003cli\u003eReturn or replacement handled according to Gledewen policy terms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for: This Gledewen eight-piece door handle kit is for Toyota Camry owners and independent mechanics who need a complete, cost-effective replacement for cracked, loose, or nonfunctional handles across all four doors. It’s ideal for restorations, used car refurbishments, or anyone who prefers replacing both interior and exterior handles at once for consistent appearance and operation.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these handles include keyholes for both front doors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the kit includes two outside front handles with keyholes for driver and passenger sides.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these handles an exact OEM match for 1997–2001 Camry?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are direct-fit replacements made to OEM specifications and reference common Toyota part numbers for compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587560505529,"sku":"B0C615RB2C","price":100.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-passenger-handle-front-view_706a5429-2e26-438f-81f3-c9bdce5d43e8.jpg?v=1790512785"},{"product_id":"gledewen-ra003-afm-dfm-disabler-obd-ii-plug-in-for-v6-v8-restores-consistent-power-smoother-acceleration","title":"Gledewen RA003 AFM\/DFM Disabler — OBD-II Plug-In for V6\/V8 (Restores Consistent Power, Smoother Acceleration)","description":"\u003cp\u003e\u003cstrong\u003eThe Gledewen RA003 is a plug-and-play AFM\/DFM disabler that prevents GM cylinder deactivation so your V6 or V8 engine runs consistently on all cylinders.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact module is built to stop Active Fuel Management (AFM) and Dynamic Fuel Management (DFM) systems from switching cylinders off while driving, restoring steady power, smoother acceleration, and reduced vibration and noise associated with frequent cylinder on\/off cycles. Designed for a wide range of GM vehicles, the RA003 installs in seconds via the OBD-II port and can be removed anytime to return the vehicle to factory behavior.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines does the RA003 work with?\u003c\/h3\u003e\n\u003cp\u003eThe RA003 covers many Chevrolet, GMC, Cadillac, Buick, Pontiac, Saab, Suzuki, and Isuzu models fitted with AFM\/DFM. It supports most V6 and V8 engines listed by year and displacement, but it does not support GM models equipped with 10-speed transmissions (notably certain 2019+ 5.3L and 6.2L applications).\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with Silverado, Sierra, Tahoe, Yukon, Escalade, Enclave and many more models.\u003c\/li\u003e\n  \u003cli\u003eCompatible engine sizes include 3.6L, 4.3L, 5.3L, 6.0L, 6.2L and similar V6\/V8 variants.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 10-speed transmission 5.3L\/6.2L models (2019+ where applicable).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the RA003 and how reversible is it?\u003c\/h3\u003e\n\u003cp\u003eInstallation is tool-free and user-friendly: plug the RA003 into your vehicle’s OBD-II port and it takes effect immediately. The device does not alter your ECU, so unplugging it restores original AFM\/DFM operation without traces or reprogramming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play OBD-II connection — no tools required.\u003c\/li\u003e\n  \u003cli\u003eDoes not reflash or modify ECU software; fully reversible.\u003c\/li\u003e\n  \u003cli\u003eRemove anytime to regain factory AFM\/DFM function instantly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat driving changes should I expect after using this disabler?\u003c\/h3\u003e\n\u003cp\u003eWith AFM\/DFM disabled, your engine remains on all cylinders, which typically yields steadier throttle response, reduced engine vibration, and consistent power during towing or spirited driving. Fuel economy may change depending on driving style and conditions; this product focuses on performance consistency rather than guaranteed MPG improvements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother acceleration with fewer hesitations.\u003c\/li\u003e\n  \u003cli\u003eLower NVH (noise, vibration, harshness) from cylinder switching.\u003c\/li\u003e\n  \u003cli\u003eMore predictable power delivery for towing or performance driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the RA003 reliable and what warranty or support is included?\u003c\/h3\u003e\n\u003cp\u003eGledewen manufactures the RA003 under quality controls that meet OEM-level expectations for durability. The module includes a 24-month warranty and customer support for replacement or refund if you experience defects or incompatibility issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt and tested to meet OEM-style standards for reliability.\u003c\/li\u003e\n  \u003cli\u003e24-month warranty with replacement or refund options via seller messaging.\u003c\/li\u003e\n  \u003cli\u003eSimple returns and technical assistance available through the sales channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Gledewen RA003 is intended for owners of GM V6 and V8 cars, trucks, and SUVs who want to eliminate the audible vibration, hesitation, and variable feel caused by AFM\/DFM cylinder deactivation. It's ideal for drivers who tow, carry heavy loads, or want a consistently responsive powertrain without making permanent ECU changes. Always verify your model year, engine displacement, and transmission type against the compatibility list before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the RA003 work on my 2018 Silverado 5.3L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your 2018 Silverado has AFM\/DFM and not the 10-speed transmission, the RA003 is compatible. Double-check engine and transmission before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installing the RA003 change my ECU permanently?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The RA003 does not reflash or modify the ECU—remove it to restore factory AFM\/DFM settings immediately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587578757305,"sku":"B0FGCPZQPM","price":98.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-unit.jpg?v=1790513607"},{"product_id":"gledewen-dual-knock-sensor-kit-for-gm-ls-4-8-5-3-6-0l-wiring-harness-intake-gaskets","title":"Gledewen Dual Knock Sensor Kit for GM LS 4.8\/5.3\/6.0L — Wiring Harness \u0026 Intake Gaskets","description":"\u003cp\u003e\u003cstrong\u003eGledewen's kit supplies two OE-style knock sensors, a reinforced wiring harness, and two intake manifold gasket sets engineered to restore proper knock detection and a sealed intake on GM 4.8L, 5.3L and 6.0L engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis full replacement package is built for GM trucks and SUVs from the late 1990s through the mid-2000s — including Chevy Silverado, Tahoe, Avalanche, GMC Sierra, Yukon, Cadillac and Hummer models that use the LS family engines. The kit combines corrosion-resistant electrical terminals and durable rubber gaskets so you get reliable electrical signals to the engine control module and a long-lasting intake seal in one service job. It replaces multiple OE part numbers and comes with a harness to simplify installation when both sensors or the wiring show wear.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these knock sensors improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eKnock sensors detect abnormal combustion events. Fresh, properly functioning sensors give the engine control unit accurate inputs so ignition timing can be adjusted to avoid detonation and preserve drivability. Worn or intermittent sensors can cause poor fuel\/ignition behavior and diagnostic trouble codes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo sensors included to replace both cylinder-bank detectors simultaneously\u003c\/li\u003e\n  \u003cli\u003eTin-plated and solid brass terminals for consistent conductivity\u003c\/li\u003e\n  \u003cli\u003e100% accelerometer vibration-tested for durability under road and engine stresses\u003c\/li\u003e\n  \u003cli\u003eCompatible with many OE numbers so it fits direct-replacement procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the wiring harness add to a simple sensor swap?\u003c\/h3\u003e\n\u003cp\u003eThe included knock sensor harness replaces old, brittle or corroded connectors that often cause intermittent signals. Installing a new harness restores secure connections, reduces the chance of false codes, and often cuts labor by avoiding splicing or chasing hard-to-reach factory plugs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled harness matches factory routing and plug types\u003c\/li\u003e\n  \u003cli\u003eRobust terminals resist corrosion for longer electrical reliability\u003c\/li\u003e\n  \u003cli\u003eSaves time versus repairing damaged factory wiring in tight engine bays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo the intake manifold gaskets in the kit meet repair needs?\u003c\/h3\u003e\n\u003cp\u003eThe intake manifold gasket sets are molded from high-quality rubber designed to hold a durable seal between the manifold and cylinder heads. Replacing gaskets at the same time as knock sensors is common when removing components, helping prevent vacuum leaks and restoring engine vacuum stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo gasket sets included for both intake sealing surfaces\u003c\/li\u003e\n  \u003cli\u003eHigh-grade rubber resists oil and coolant exposure in typical engine environments\u003c\/li\u003e\n  \u003cli\u003eHelps eliminate vacuum leaks that can cause rough idle or drivability issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and OE numbers does this kit cover?\u003c\/h3\u003e\n\u003cp\u003eThis Gledewen kit targets GM LS-family engines used across numerous full-size trucks and SUVs. It is a fit-for-purpose replacement for many factory part numbers, making it suitable for widespread model applications and straightforward cross-referencing during parts selection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 4.8L, 5.3L and 6.0L engines in 1999–2007 GM trucks and SUVs\u003c\/li\u003e\n  \u003cli\u003eCommonly replaces 12601822, 12589867, 89060413, 213-3521 and several OEM equivalents\u003c\/li\u003e\n  \u003cli\u003eApplications include Chevrolet Silverado, Tahoe, Avalanche, Suburban; GMC Sierra, Yukon; Cadillac, Hummer and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: technicians, DIY mechanics, and fleet owners who prefer an all-in-one repair solution when addressing knock sensor faults and intake leaks on older GM LS-series engines. Choose this kit if you want matched sensors, a fresh harness to avoid electrical headaches, and new intake gaskets so both detection and sealing systems are restored in one service interval. The package includes two knock sensors, a dedicated harness, two intake manifold gasket sets, and a 12-month warranty to support replacement or refund if defects arise.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2003 Chevy Silverado 5.3L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it covers 4.8L, 5.3L and 6.0L engines for many 1999–2006 Silverado and similar GM models. Cross-check your VIN and OE numbers for confirmation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the harness save me from splicing factory wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the included pre-assembled harness matches factory connector types, avoiding most in-place splices and speeding installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67587777167545,"sku":"B0DCBDS359","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-packaging-dual-knock-kit.jpg?v=1790515335"},{"product_id":"gledewen-toyota-camry-exterior-door-handle-set-smooth-black-2012-2017-4-piece-oem-fit-reinforced-plastic","title":"Gledewen Toyota Camry Exterior Door Handle Set — Smooth Black 2012-2017, 4‑Piece OEM‑Fit, Reinforced Plastic","description":"\u003cp\u003e\u003cstrong\u003eGledewen 4 PCS exterior door handles are a direct-fit, smooth-black replacement set designed to restore the front and rear, driver and passenger side door handles on 2012–2017 Toyota Camry models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese four exterior handles are engineered to match the original equipment fit and function for Toyota Camry model years 2012 through 2017. Constructed from reinforced plastic with a smooth black finish, the set replaces common Toyota part numbers (6921106090, 6921706370, 6921106090C0, 6925006020C0) and arrives ready for quick installation. Gledewen backs the kit with a 24-month warranty and basic customer support to help with fitment or installation questions.\u003c\/p\u003e\n\n\u003ch3\u003eWill these handles fit my specific Camry year and model?\u003c\/h3\u003e\n\u003cp\u003eThey are specifically compatible with Toyota Camry model years 2012, 2013, 2014, 2015, 2016, and 2017. Always confirm your vehicle’s year, make, and model before ordering to ensure proper compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for 2012–2017 Toyota Camry vehicles.\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers: 6921106090, 6921706370, 6921106090C0, 6925006020C0.\u003c\/li\u003e\n  \u003cli\u003eSold as a set of four—front and rear, left and right.\u003c\/li\u003e\n  \u003cli\u003eCheck your current part number or consult your VIN if unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is the installation process?\u003c\/h3\u003e\n\u003cp\u003eThese handles are built to OEM dimensions so installation is usually quick and straightforward for anyone comfortable with basic automotive tasks. In most cases you can remove the interior door panel, disconnect linkage, swap the handle, and reassemble without specialized tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned as a direct replacement—no major modifications needed.\u003c\/li\u003e\n  \u003cli\u003eMade from reinforced plastic for easy handling during swap-out.\u003c\/li\u003e\n  \u003cli\u003eInstallation time typically ranges from 20–45 minutes per door for a DIYer.\u003c\/li\u003e\n  \u003cli\u003eContact Gledewen support if you encounter fitment or installation problems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish can I expect, and how durable are they?\u003c\/h3\u003e\n\u003cp\u003eThe handles are molded from reinforced plastic and finished with a smooth black surface treatment to match the factory look. The material choice balances rigidity, corrosion resistance, and lightweight performance for long-term exterior use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced plastic construction for impact resistance.\u003c\/li\u003e\n  \u003cli\u003eSurface treated for abrasion and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eDesigned to visually coordinate with the vehicle’s exterior trim.\u003c\/li\u003e\n  \u003cli\u003eDurability backed by a 24-month warranty from Gledewen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what support is available?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes four exterior door handles (front and rear, driver and passenger side). Gledewen provides a 24-month warranty and customer service to address installation or product concerns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains: 4 exterior door handles.\u003c\/li\u003e\n  \u003cli\u003eCompatible with listed Camry years—verify fit before installation.\u003c\/li\u003e\n  \u003cli\u003eReplaces specific OEM part numbers for hassle-free swapping.\u003c\/li\u003e\n  \u003cli\u003e24-month warranty and responsive customer support via Gledewen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Gledewen door-handle set is intended for Toyota Camry owners (2012–2017) who need a reliable, OEM‑style replacement for worn, damaged, or missing outside handles. It suits DIY mechanics who want a direct-fit solution, body shops that perform exterior repairs, and vehicle owners seeking a cost-effective restoration without altering the car’s original appearance. If you need exact part match, practical durability, and straightforward installation with warranty support, this set is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these handles include mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes four exterior handles; verify if your vehicle’s clips or screws are reusable, as additional hardware may be needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a direct OEM replacement for my Camry?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these handles replace OE numbers listed and are designed as direct-fit replacements for 2012–2017 Camry models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67588158193849,"sku":"B0F8BMZ89B","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-handle-assembly-front-view.jpg?v=1790516777"},{"product_id":"gledewen-chrome-exterior-door-handles-for-1999-2007-chevy-tahoe-front-driver-passenger-set-oe-fit-durable-finish","title":"Gledewen Chrome Exterior Door Handles for 1999–2007 Chevy Tahoe — Front Driver \u0026 Passenger Set, OE-fit Durable Finish","description":"\u003cp\u003e\u003cstrong\u003eTwo chrome front exterior lever door handles (driver and passenger) with keyholes, designed as direct-fit replacements for specified 1999–2007 Chevy, GMC and Cadillac trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Gledewen replacement exterior door handles restore the look and function of worn or damaged factory levers. Each set includes both the left (driver) and right (passenger) front handles finished in high-gloss chrome with black housings and keyholes. They are manufactured to match OE dimensions and fitment so they install without modification on compatible models listed below.\u003c\/p\u003e\n\n\u003ch3\u003eWill these handles fit my truck or SUV?\u003c\/h3\u003e\n\u003cp\u003eThey are made for a broad range of GM vehicles from roughly 1999–2007. Fitment covers many Chevrolet Silverado, Tahoe, Suburban, Avalanche, GMC Sierra, Yukon, and Cadillac Escalade model years noted in the compatibility list. Confirm the OE part numbers or compare your existing handles to the product photos before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Chevrolet, GMC and Cadillac models from 1999–2007 as listed.\u003c\/li\u003e\n  \u003cli\u003eMatches OE part numbers: 15034985, 15034986, GM1310129, GM1311129, 77262, 77261.\u003c\/li\u003e\n  \u003cli\u003eIncludes both front driver and passenger handles with keyholes and black housings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the chrome finish hold up over time?\u003c\/h3\u003e\n\u003cp\u003eGledewen uses an upgraded chrome plating process to deliver a bright, glossy surface that resists oxidation and light scratching better than untreated finishes. Proper care—regular washing and avoiding harsh abrasives—will maintain the shine and keep the handles looking newer longer. The chrome plating improves visual gloss and offers durable daily-use performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-gloss chrome plating for improved shine and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eSurface treated to reduce visible scratches and fading.\u003c\/li\u003e\n  \u003cli\u003eDesigned for long service life under normal use conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these easy to install and truly a direct replacement?\u003c\/h3\u003e\n\u003cp\u003eYes—these handles are built to OEM dimensions so they mount using the factory hardware and latch points, typically requiring no drilling or alteration. Many users report straightforward installation that takes about 15 minutes per side when following standard door-panel removal steps. If you are comfortable with basic hand tools, you can complete the swap yourself.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OE-style replacement—no modifications required for most applications.\u003c\/li\u003e\n  \u003cli\u003eEstimated install time around 15 minutes per handle for experienced DIYers.\u003c\/li\u003e\n  \u003cli\u003eFits into original mounting locations and works with factory rods and latches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what support is offered?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one front exterior right (passenger) and one front exterior left (driver) lever handle, both with keyholes and black housings. Each item is new and inspected prior to shipping. Gledewen provides a manufacturer-backed warranty for added confidence.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePacking list: 1x right front exterior handle with keyhole, 1x left front exterior handle with keyhole.\u003c\/li\u003e\n  \u003cli\u003eNew condition, inspected before shipment.\u003c\/li\u003e\n  \u003cli\u003e24-month warranty and customer support through Gledewen for defects or fitment issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These replacement chrome exterior lever handles suit owners and mechanics restoring or upgrading mid-2000s GM trucks and SUVs who want a bright, OEM-style appearance and reliable operation. Ideal for vehicles with faded, cracked, or inoperable front door handles where a direct-fit, cost-effective solution is preferred over expensive dealer parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these handles require modifications to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They are designed as direct OE-style replacements and typically install without drilling or alterations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What part numbers do these replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They replace OE numbers 15034985, 15034986, GM1310129, GM1311129, 77262 and 77261.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67588241621177,"sku":"B0B6HV76HB","price":83.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-passenger-handle.jpg?v=1790517459"},{"product_id":"gledewen-tailgate-handle-for-1988-2002-chevy-gmc-c-k-trucks-all-metal-textured-oe-fit","title":"Gledewen Tailgate Handle for 1988–2002 Chevy GMC C\/K Trucks — All‑Metal, Textured OE Fit","description":"\u003cstrong\u003eGledewen’s all-metal exterior tailgate handle replaces worn or broken handles on 1988–2002 Chevy and GMC C\/K series pickups for a factory-style fit and durable operation.\u003c\/strong\u003e\n\n\u003cp\u003eIf your tailgate handle is cracked, loose, or no longer latching, this direct-fit replacement restores reliable opening and closing without costly dealer parts. Built with reinforced components and hardened steel internals, the Gledewen handle is designed to match OE form, fit, and function while offering a straightforward swap that most owners can complete in about 15 minutes.\u003c\/p\u003e\n\n\u003ch3\u003eWill this handle fit my Chevy or GMC truck?\u003c\/h3\u003e\n\u003cp\u003eThis handle covers a broad range of C\/K pickup years and models. Check the model list and OE part numbers to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Chevrolet and GMC C1500, C2500, C3500, K1500, K2500, K3500 (see years below).\u003c\/li\u003e\n  \u003cli\u003eModel years: Chevrolet 1988–1999 (C1500), 1988–2000 (C2500\/C3500 variations), 1988–2002 as listed for C3500; GMC coverage mirrors those ranges.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit OE numbers: 76105, 77077, 15991785, 15991786, 15606895, 15531113, GM1916101, GM1915101.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the Gledewen tailgate handle constructed and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThe assembly combines reinforced ABS plastic with steel hardware so it resists cracking, warping, and premature wear. Hardened steel bolts and springs help preserve latch function under repeated use and exposure to road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterials: reinforced ABS exterior with steel bolt and spring components.\u003c\/li\u003e\n  \u003cli\u003eDurability focus: reinforced body plus hardened internal parts for longer service life.\u003c\/li\u003e\n  \u003cli\u003eFinish: textured exterior that matches factory appearance and hides minor surface wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eDesigned as a direct OE replacement, no cutting or modification is required for most trucks. The handle replaces the exterior unit and includes the bezel so you have everything needed to complete the swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePacking list: 1x exterior textured tailgate handle, 1x tailgate bezel.\u003c\/li\u003e\n  \u003cli\u003eInstallation time: generally about 15 minutes for a basic replacement with common hand tools.\u003c\/li\u003e\n  \u003cli\u003eFitment: intended for direct installation to factory mounting locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and warranty does Gledewen provide?\u003c\/h3\u003e\n\u003cp\u003eGledewen backs this replacement handle with a two-year warranty and customer support for fit or function issues. If the part fails or arrives damaged, contact Gledewen through the seller channel for assistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWarranty: 24-month limited coverage from date of purchase.\u003c\/li\u003e\n  \u003cli\u003eSupport: seller contact available for product questions and warranty claims.\u003c\/li\u003e\n  \u003cli\u003eQuality control: tested to meet factory operating parameters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This tailgate handle is aimed at owners and DIY mechanics with 1988–2002 Chevrolet or GMC C\/K series pickups who want a cost-effective, OEM-style replacement. It’s a practical choice for restoration projects, everyday maintenance, or anyone needing a quick, reliable repair that looks and functions like the original equipment part.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which truck years and models does this Gledewen handle fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Chevy and GMC C1500\/C2500\/C3500 and K1500\/K2500\/K3500 in the 1988–2002 ranges listed; verify with OE numbers supplied.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install this tailgate handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required; typical hand tools are sufficient and installation usually takes about 15 minutes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67588449435833,"sku":"B0BPMD2QQW","price":75.26,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-tailgate-handle-front-view_88a5754a-2cfc-4362-935f-2ffe4c3834a0.jpg?v=1790518914"},{"product_id":"gledewen-metal-tailgate-latch-handle-for-1998-2011-ford-ranger-mazda-b-series-direct-fit-corrosion-resistant","title":"Gledewen Metal Tailgate Latch Handle for 1998–2011 Ford Ranger \u0026 Mazda B-Series — Direct-Fit, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eThis Gledewen all-metal exterior tailgate latch handle is a direct-fit replacement engineered to restore secure, smooth opening and closing for compatible 1998–2011 Ford Ranger and Mazda B-series trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your pickup’s tailgate handle is cracked, worn, or no longer latching reliably, this robust metal replacement from Gledewen provides a durable, OEM-style solution. Manufactured to match the original design and part numbers, it slips into the stock mounting points and linkage so you can replace the broken handle quickly without modifying the tailgate. The part is corrosion-resistant, finished for long-term appearance, and backed by a two-year warranty for added peace of mind.\u003c\/p\u003e\n\n\u003ch3\u003eWill this handle fit my truck model and year?\u003c\/h3\u003e\n\u003cp\u003eYes — the Gledewen tailgate latch is offered as a precise replacement for specific Ford Ranger and Mazda B-series models across the listed years and submodels. Compatibility covers multiple Ranger trims and several Mazda B2300\/B3000\/B4000 variants where the original tailgate handle uses the same mounting and latch geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Ford Rangers: 1998–2000, 2001–2005 Edge, 2005–2009 FX4, 2006–2011 Sport, 2005–2007 STX, 2004 Tremor, and 2001–2011 XL\/XLT.\u003c\/li\u003e\n  \u003cli\u003eCompatible Mazdas: B2300 (2001–2009 variations), B3000 (2002–2008\/2005–2007 variants), B4000 (2002–2009 and select 2001–2010 trims).\u003c\/li\u003e\n  \u003cli\u003eExact-fit part numbers: 1L5Z9943400AAA, 1L5Z-9943400-AAA, 1L5Z-9943400-AAATEX, 77872, FO1915109.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is it to install the replacement tailgate handle?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic hand tools and simple vehicle disassembly. The handle is designed to match OEM mounting locations so you typically only need to remove the inner tailgate access panel, disconnect the linkage, swap the handle, and reattach the panel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEstimated install time: about 15–30 minutes for most owners.\u003c\/li\u003e\n  \u003cli\u003eTools typically required: screwdriver or trim tool, ratchet with sockets, and pliers.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design eliminates drilling or modification to the tailgate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish does this replacement use?\u003c\/h3\u003e\n\u003cp\u003eThe Gledewen handle is made from high-quality metal engineered for strength and resistance to wear. The finish is upgraded for improved paint adhesion and to resist fading and surface rust, helping the handle look correct and perform longer under outdoor conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-gauge metal construction for durability against daily use.\u003c\/li\u003e\n  \u003cli\u003eProtective coating to prevent corrosion and maintain appearance.\u003c\/li\u003e\n  \u003cli\u003eManufactured and tested to meet or exceed OEM operating parameters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and post-purchase support do I get?\u003c\/h3\u003e\n\u003cp\u003eThe product is sold new and includes a 24-month warranty covering defects and failures under normal use. Gledewen offers direct customer support for fitment or performance issues; contact through the marketplace message system for assistance, replacement, or warranty claims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-year warranty for manufacturer defects and functional failures.\u003c\/li\u003e\n  \u003cli\u003eDirect-seller support available through the purchase platform.\u003c\/li\u003e\n  \u003cli\u003eReplacement aims to meet or exceed original equipment standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement tailgate latch handle is ideal for owners of compatible Ford Ranger and Mazda B-series trucks who need a reliable, OEM-style fix without custom work. It fits DIYers and professional mechanics who want a durable metal handle to restore tailgate function quickly, preserve exterior appearance, and avoid recurring plastic-handle failures. If you need a direct-fit part number match and a ready-to-install solution with a two-year warranty, this Gledewen handle is designed to meet that need.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this handle match OEM part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It matches OEM numbers like 1L5Z9943400AAA, 77872, and FO1915109 for direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typical installation takes 15–30 minutes using basic tools and no tailgate modifications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67588805394617,"sku":"B0DT3PWTYC","price":73.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-view-tailgate-handle.jpg?v=1790525216"},{"product_id":"gledewen-o2-oxygen-sensor-2-pack-for-ford-f150-f250-ranger-upstream-downstream-replacement-stainless-steel-durability","title":"Gledewen O2 Oxygen Sensor 2-Pack for Ford F150 F250 Ranger — Upstream \u0026 Downstream Replacement, Stainless Steel Durability","description":"\u003cp\u003e\u003cstrong\u003eGledewen O2 Sensor 2-pack replaces upstream and downstream oxygen sensors on compatible Ford, Lincoln, Mazda and Mercury vehicles to restore accurate air-fuel monitoring and engine performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle is showing a check-engine light tied to oxygen sensors or you’re experiencing rough idle, increased fuel use, or failed emissions tests, this pair of upstream and downstream O2 sensors is built as a direct replacement for many Ford-family vehicles and several domestic imports. Each sensor is manufactured with high-temperature materials and a double laser-welded stainless steel body for durability and reliable signal response. Before ordering, compare plug shape and wiring against your original part to confirm fitment.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and OE numbers does this Gledewen O2 sensor 2-pack fit?\u003c\/h3\u003e\n\u003cp\u003eThese sensors are intended as replacements for many model years across Ford, Lincoln, Mazda and Mercury lines. The listing covers common OEM reference numbers so you can match the replacement to your original part. Always verify plug and wire count against your vehicle’s current sensor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces REPLACE# 15716, 15717, 15718, 15719, ZZC318861, XR3Z9G444CA, 15664, 234-4401, 234-4046.\u003c\/li\u003e\n  \u003cli\u003eCommon vehicle fits: Ford F-150\/F-250\/F-350, Expedition, Explorer, Ranger, Escape; Lincoln Navigator; Mazda Tribute; Mercury Mariner; Crown Victoria; Bronco; many E-series and Taurus\/Falcon years as listed.\u003c\/li\u003e\n  \u003cli\u003eFitment reminder: if the sensor plug differs from your original, this part will not fit; compare photos and connectors before purchasing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will these O2 sensors affect engine performance and emissions?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors measure exhaust oxygen to help the engine control unit (ECU) balance air and fuel. Fresh, responsive sensors reduce incorrect fuel trims and help the engine run closer to factory specifications, which often improves throttle response and lowers emissions output.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps the ECU maintain optimal air-fuel ratio for smoother running.\u003c\/li\u003e\n  \u003cli\u003eCan reduce rough idling and hesitation tied to faulty oxygen readings.\u003c\/li\u003e\n  \u003cli\u003eImproves likelihood of passing emissions inspections when sensors were the cause of failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key build and durability features of these sensors?\u003c\/h3\u003e\n\u003cp\u003eGledewen designs these O2 sensors with heat-resistant internals and a corrosion-resistant stainless steel housing. The double laser-welded construction helps seal the unit against moisture and exhaust contaminants for a longer service life under normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temp materials for quicker signal response and longevity.\u003c\/li\u003e\n  \u003cli\u003eDouble laser-welded stainless steel body to resist exhaust exposure.\u003c\/li\u003e\n  \u003cli\u003eSupplied as a matched upstream and downstream pair for full system replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat about warranty, installation and compatibility checks?\u003c\/h3\u003e\n\u003cp\u003eGledewen supplies a 12-month warranty covering replacement or refund if the sensors fail within the period. Installation is typically straightforward for someone with basic mechanical skills or an automotive technician; however, correct fit depends on connector type and sensor thread size.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month replacement or refund warranty through seller support.\u003c\/li\u003e\n  \u003cli\u003eCompare connector and plug photos to your original sensor before ordering.\u003c\/li\u003e\n  \u003cli\u003eTorque to manufacturer spec and use anti-seize on threads if not pre-applied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 2-piece Gledewen O2 sensor set is for owners or mechanics working on Ford, Lincoln, Mazda or Mercury vehicles listed in the fitment references who need to replace both upstream and downstream oxygen sensors. It suits buyers wanting a cost-effective aftermarket alternative built with durable materials and backed by a one-year warranty, provided they confirm connector compatibility with their original parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match the sensor plug, wire count and OEM reference numbers to your original part; if the plug differs, it will not fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, Gledewen offers a 12-month replacement or refund warranty through seller support.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gledewen","offers":[{"title":"Default Title","offer_id":67588807164089,"sku":"B07SVYNWRK","price":79.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gledewen-front-packaging-sensors.jpg?v=1790525314"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/gledewen-timing-cover-gasket-set-front-packaging.jpg?v=1790612535","url":"https:\/\/redleafauto.ca\/collections\/gledewen.oembed?page=2","provider":"Redleaf Auto","version":"1.0","type":"link"}