{"title":"Headlight \u0026 Tail Light Assemblies","description":"\u003cp\u003eComplete headlight, tail light and turn-signal assemblies plus lenses and housings.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"z-offroad-4x6-60w-led-headlight-kit-4-pack-dot-approved-rectangular-h4651-h4652-fit-ip67-waterproof","title":"Z-OFFROAD 4x6\" 60W LED Headlight Kit — 4-Pack DOT Approved Rectangular H4651\/H4652 Fit, IP67 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eZ-OFFROAD 4x6\" 60W LED headlight kit is a DOT-approved, plug-and-play rectangular bulb replacement that delivers brighter, wider light and long-lasting durability for vehicles using 4x6\" sealed-beam housings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade worn or dim rectangular sealed-beam headlights with this 4-piece Z-OFFROAD LED set designed to match common H4651\/H4652\/H4656\/H4666\/H6545 fitments. Each lamp pairs die-cast aluminum housing with a UV-protected polycarbonate lens to resist clouding and impact. With DOT SAE certification and IP67 ingress protection, these units are engineered for road legality, rugged conditions, and improved nighttime visibility compared with old halogen sealed beams.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these LED headlights improve nighttime visibility?\u003c\/h3\u003e\n\u003cp\u003eThe Z-OFFROAD LEDs use high-intensity chips and an engineered beam pattern to produce a brighter, more uniform spread of light with reduced hot spots. High beam output is rated at about 3600 lumens per unit while low beam is approximately 2800 lumens per unit, offering stronger forward illumination and a wider peripheral reach than traditional sealed beams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3600 lm per headlight on high beam, 2800 lm on low beam for increased range.\u003c\/li\u003e\n  \u003cli\u003eEngineered beam pattern for controlled cutoff and wider side illumination.\u003c\/li\u003e\n  \u003cli\u003eAnti-flicker harness included to maintain stable light output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my vehicle and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eThese 4x6\" LED units replace most common rectangular sealed-beam part numbers including H4656, H4651, H4652, H4666 and H6545. The kit is 100% plug-and-play with supplied H4 3-pin male connectors and H4 9003 HB2 wiring harnesses, so no cutting or splicing is normally required for compatible sockets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacements for H4651\/H4652\/H4656\/H4666\/H6545 sealed-beam housings.\u003c\/li\u003e\n  \u003cli\u003eIncludes 4x H4 3-pin male lamps and 4x H4 9003 HB2 harnesses for installation.\u003c\/li\u003e\n  \u003cli\u003eFits many trucks and cars: Freightliner, Peterbilt, Kenworth, Chevy models and classic cars with 4x6\" headlight systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protections are built into the headlights?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies combine a die-cast aluminum body for heat dissipation with a hard-coated polycarbonate lens that resists yellowing and impact. IP67 certification means the headlights are dust-tight and protected against temporary immersion, while the UV coating and robust housing extend service life in harsh environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDie-cast aluminum housing for effective thermal management.\u003c\/li\u003e\n  \u003cli\u003eUV-protected, hard-coated polycarbonate lens to prevent clouding.\u003c\/li\u003e\n  \u003cli\u003eIP67 waterproof\/dustproof rating for reliable performance in bad weather.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these DOT-approved and road legal?\u003c\/h3\u003e\n\u003cp\u003eYes — these Z-OFFROAD rectangular LED headlights carry DOT SAE approval (refer to DOT SAE MS-4686 HL VOR 19 for verification). That certification indicates the lights meet specific regulatory standards for automotive lighting when installed correctly in compatible housings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDOT SAE approved for on-road use when fitted in compatible sealed-beam housings.\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet beam pattern and safety standards referenced by NHTSA searchable codes.\u003c\/li\u003e\n  \u003cli\u003eProper installation into the intended 4x6\" housing is required for compliance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 4-pack from Z-OFFROAD suits drivers who need a direct, reliable upgrade for vehicles using 4x6\" sealed-beam headlights — from classic cars and pickups to heavy-duty trucks like Kenworth, Peterbilt and Freightliner models. It's a practical choice for owners seeking improved nighttime visibility, durable construction for off-road or work use, and a plug-and-play retrofit without major rewiring. Ideal for mechanics, restoration projects, fleet maintenance, and drivers wanting a brighter, longer-lasting light solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these LEDs plug into a stock 4x6 headlight socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes H4 3-pin male bulbs and H4 9003 HB2 harnesses for plug-and-play installation in compatible 4x6\" sockets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these headlights waterproof and DOT approved?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are IP67 rated for water\/dust protection and DOT SAE approved (see DOT SAE MS-4686 HL VOR 19 for reference).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Z-OFFROAD","offers":[{"title":"Default Title","offer_id":67584845873337,"sku":"B07J5D2RTM","price":340.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/z-offroad-front-view-4x6-led-headlight-assembly.jpg?v=1790456278"},{"product_id":"mikafex-led-tail-lights-for-2003-2006-chevy-silverado-1500-2500-3500-clear-black-lens-oem-fit","title":"MiKaFex LED Tail Lights for 2003–2006 Chevy Silverado 1500\/2500\/3500 — Clear Black Lens, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eMiKaFex LED tail lights replace factory rear lamps on select 2003–2006 Chevy Silverado models for a brighter, longer-lasting, OEM-fit lighting upgrade.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese LED tail lights are engineered to fit 2003–2006 Chevy Silverado 1500, 1500 HD, 2500, 2500 HD, and 2004–2006 Silverado 3500 models (also fits certain 2007 Classic applications except 3500HD). Built to OEM specifications from durable ABS with a clear black lens, the lights are designed as direct replacements for the listed GM part numbers so you can restore rear lighting performance and appearance without wiring modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lights fit my Silverado exactly?\u003c\/h3\u003e\n\u003cp\u003eThey are designed to match the factory mounting points and connectors on the compatible model years and trims listed. Check your vehicle year and model against the compatibility list and part numbers before ordering to ensure a direct swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2003–2006 Silverado 1500 \u0026amp; 1500 HD\u003c\/li\u003e\n  \u003cli\u003eCompatible: 2003–2006 Silverado 2500 \u0026amp; 2500 HD\u003c\/li\u003e\n  \u003cli\u003eCompatible: 2004–2006 Silverado 3500; some 2007 Classic models (not 2007 Classic 3500HD)\u003c\/li\u003e\n  \u003cli\u003eReplaces GM part numbers: GM2800174, GM2801174, GM2800161, GM281161, 19169002–19169005\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these tail lights improve visibility and durability?\u003c\/h3\u003e\n\u003cp\u003eThe LED modules provide brighter, more consistent illumination than older incandescent bulbs, helping other drivers see your brake and signal lights sooner. Constructed from impact-resistant ABS plastic with a clear black lens, the assemblies resist corrosion and weathering for longer service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLED output for clearer brake and running light visibility\u003c\/li\u003e\n  \u003cli\u003eABS housing resists cracks and moisture intrusion\u003c\/li\u003e\n  \u003cli\u003eClear black lens offers modern styling with UV resistance\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet original equipment fit and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I need to install these tail lights—any wiring or tools required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be a straightforward, bolt-on replacement using the existing factory connectors and hardware. Basic hand tools are typically all that’s needed; no cutting, splicing, or aftermarket adapters should be required when used on compatible models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses factory mounting points and electrical connectors\u003c\/li\u003e\n  \u003cli\u003eSimple swap-out—remove old assembly, install new, secure bolts\u003c\/li\u003e\n  \u003cli\u003eNo special wiring harness usually needed for listed Chevy models\u003c\/li\u003e\n  \u003cli\u003eRefer to vehicle manual for torque specs and safety steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I verify before buying to avoid returns?\u003c\/h3\u003e\n\u003cp\u003eConfirm the exact year, model, and trim of your Silverado and compare it with the compatibility list and GM part numbers provided. Visual-check the existing taillight shape and connector type to ensure you receive the correct left or right assembly for your truck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch your truck’s year and model to the compatibility list\u003c\/li\u003e\n  \u003cli\u003eCompare GM replacement part numbers where possible\u003c\/li\u003e\n  \u003cli\u003eInspect current taillight for identical mounting and connector style\u003c\/li\u003e\n  \u003cli\u003eContact seller with VIN or photos if uncertain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers and technicians who want a reliable, OEM-spec LED replacement for worn, damaged, or outdated tail light assemblies on compatible 2003–2006 Chevrolet Silverado pickups. These units suit owners who need a direct-fit upgrade with improved illumination, durable ABS construction, and a contemporary clear black lens—ideal for restoration projects, truck maintenance shops, and Silverado enthusiasts aiming to maintain factory alignment and electrical compatibility without aftermarket modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these tail lights plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. On compatible 2003–2006 Silverado models they use factory connectors and mount points for a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these replace specific GM part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They replace GM2800174, GM2801174, GM2800161, GM281161, and 19169002–19169005 part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MiKaFex","offers":[{"title":"Default Title","offer_id":67584846069945,"sku":"B0D91WL3VQ","price":271.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/mika-fex-front-assembly-chevy-silverado-tail-light.jpg?v=1790456275"},{"product_id":"mikafex-led-tail-light-for-2003-2006-chevy-silverado-1500-2500-3500-clear-red-lens-direct-fit-oem-replacement","title":"MiKaFex LED Tail Light for 2003-2006 Chevy Silverado 1500\/2500\/3500 — Clear Red Lens, Direct-Fit OEM Replacement","description":"\u003cp\u003e\u003cstrong\u003eMiKaFex LED Tail Light is a direct-fit, OEM-compatible replacement designed for 2003–2006 Chevy Silverado 1500, 1500 HD, 2500, 2500 HD and 2004–2006 Silverado 3500 models (excluding 2007 Classic 3500HD).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Silverado needs a bright, durable tail light assembly that matches factory fit and finish, this MiKaFex LED Tail Light offers a practical, long-lasting solution. Built from high-quality ABS with a clear red lens and factory-tested to meet or exceed OEM standards, it installs as a direct swap for the listed GM part numbers. The unit is made to resist corrosion and everyday wear so it continues to perform under typical driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tail light fit my specific Silverado model?\u003c\/h3\u003e\n\u003cp\u003eThe assembly fits 2003–2006 Chevy Silverado 1500 and 1500 HD, 2003–2006 Silverado 2500 and 2500 HD, and 2004–2006 Silverado 3500. It does not fit the 2007 Classic 3500HD model, so confirm the year and variant before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2003, 2004, 2005, 2006 (plus 2007 Chevy Classic in some 1500\/2500 models).\u003c\/li\u003e\n  \u003cli\u003eSpecific models: 1500, 1500 HD, 2500, 2500 HD, 3500 (2004–2006).\u003c\/li\u003e\n  \u003cli\u003eNot compatible: 2007 Classic 3500HD.\u003c\/li\u003e\n  \u003cli\u003eCross-references: GM2800174, GM2801174, GM2800161, GM2801161, 19169002–19169005.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the MiKaFex unit compare to an original equipment tail light?\u003c\/h3\u003e\n\u003cp\u003eThis LED tail light is manufactured to match factory dimensions and electrical connections so it can replace the original without modification. The housing is ABS plastic with a clear red lens that resists corrosion and discoloration, and the product has been factory-tested to meet or exceed OEM performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: durable ABS plastic housing for impact and weather resistance.\u003c\/li\u003e\n  \u003cli\u003eLens: clear red lens engineered to maintain light output and color.\u003c\/li\u003e\n  \u003cli\u003eTesting: factory-tested to align with OEM standards for fit and function.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement: designed for bolt-in installation using existing mounts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended as a direct swap into your Silverado's existing tail light location using the vehicle's original mounting points and wiring harness. No printed installation guide is included, so basic experience with automotive bulb\/assembly replacement or access to model-specific instructions is recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting: direct-fit using factory screw locations and brackets.\u003c\/li\u003e\n  \u003cli\u003eWiring: compatible with OEM connectors and sockets; no splicing required for standard models.\u003c\/li\u003e\n  \u003cli\u003eInstructions: no printed manual included—refer to vehicle repair guide if needed.\u003c\/li\u003e\n  \u003cli\u003eCare: clean lens periodically to retain brightness and visibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This MiKaFex LED Tail Light is ideal for Silverado owners who need a reliable, OEM-compatible replacement for a damaged, faded or malfunctioning rear lamp. It suits do-it-yourself mechanics who want a direct-fit part, fleet operators seeking consistent maintenance cost control, and anyone replacing a broken unit with a long-lasting ABS assembly that maintains factory appearance and function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this tail light compatible with a 2005 Chevy Silverado 2500HD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits 2003–2006 Chevy Silverado 2500 and 2500 HD models as a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include installation instructions or hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The unit is a direct-fit replacement but does not include an installation guide or additional hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MiKaFex","offers":[{"title":"Default Title","offer_id":67584846135481,"sku":"B0CLJ3BDYN","price":271.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/mikafex-front-assembly-chevy-silverado-tail-light.jpg?v=1790456277"},{"product_id":"mikafex-tail-light-assembly-for-2003-2006-chevy-silverado-1500-2500-3500-smoke-black-led-with-bulbs-wiring","title":"MiKaFex Tail Light Assembly for 2003–2006 Chevy Silverado 1500\/2500\/3500 — Smoke Black LED with Bulbs \u0026 Wiring","description":"\u003cp\u003e\u003cstrong\u003eMiKaFex smoke black LED tail light assemblies replace both driver and passenger rear lamps for 2003–2006 Chevy Silverado models and come with bulbs and a wiring harness for direct-fit installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a factory-style replacement that updates the look of your Silverado while maintaining OEM fit, these MiKaFex tail lights offer a smoked lens, durable ABS housing and LED brake light performance with included bulb and wiring. Designed to meet original mounting points and match the 2003–2006 Silverado 1500, 1500 HD, 2500, 2500 HD and 3500 model years (plus the 2007 Classic where noted), the assemblies come pre-wired to simplify installation and reduce aftermarket modification.\u003c\/p\u003e\n\n\u003ch3\u003eWill these tail lights fit my Silverado?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are built to match the factory dimensions and connection style for the specified model years. They are compatible with 2003–2006 Silverado 1500\/1500HD, 2003–2006 Silverado 2500\/2500HD, and 2004–2006 Silverado 3500 models. Note the 2007 Classic 3500HD is not supported.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility: 2003–2006 Silverado 1500, 1500HD, 2500, 2500HD, 2004–2006 Silverado 3500\u003c\/li\u003e\n  \u003cli\u003eNot compatible with: 2007 Classic 3500HD\u003c\/li\u003e\n  \u003cli\u003eReplaceable part numbers: GM2800174, GM2801174, GM2800161, GM2801161, 19169002–19169005\u003c\/li\u003e\n  \u003cli\u003eDriver and passenger side sets available\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eEach tail light set ships with bulbs already installed and a wiring harness to plug into factory connectors, reducing time and the need for splicing. Because the housing follows OEM mounting points, installation generally requires basic hand tools and no major modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes bulbs pre-installed for brake and signal functions\u003c\/li\u003e\n  \u003cli\u003eSupplied wiring harness for direct connection to factory wiring\u003c\/li\u003e\n  \u003cli\u003eMounts align with original bolt locations for a bolt-on fit\u003c\/li\u003e\n  \u003cli\u003eInstructions and fit notes provided—verify vehicle model before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eMiKaFex tail lights use a sturdy ABS plastic housing and a clear smoked lens engineered to resist road wear and environmental factors. The lens and housing combination supports long-term use while preserving a darker aesthetic compared with stock units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHousing material: high-quality ABS plastic for impact and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eLens: clear smoke finish for a modern appearance\u003c\/li\u003e\n  \u003cli\u003eTested to match OEM specifications for fit and function\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand humidity and typical road conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These MiKaFex smoked LED tail light assemblies are aimed at Silverado owners who want a like-for-like replacement with an upgraded smoked look and the convenience of included bulbs and harnesses. They suit drivers replacing damaged or faded factory lights, enthusiasts refreshing the truck’s rear styling, or anyone needing a direct-fit solution that adheres to original mounting and electrical configurations. Before ordering, double-check your model year and submodel to confirm compatibility, and contact the seller if you have any fitment questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tail lights include bulbs and wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — each assembly arrives with bulbs installed and a wiring harness for direct connection to the factory wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these compatible with a 2007 Chevy Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many 2007 Classic models but are not compatible with the 2007 Classic 3500HD; verify your exact year and submodel before buying.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MiKaFex","offers":[{"title":"Default Title","offer_id":67584846102713,"sku":"B0CLJ42NY7","price":271.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/mikafex-front-assembly-smoke-black.jpg?v=1790456278"},{"product_id":"dna-motoring-led-drl-headlights-for-07-13-chevy-silverado-1500-07-14-2500-3500-hd-chrome-clear-plug-and-play","title":"DNA MOTORING LED DRL Headlights for 07-13 Chevy Silverado 1500 \/ 07-14 2500-3500 HD — Chrome\/Clear, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eThese are a direct-fit pair of DNA MOTORING LED daytime running light (DRL) headlights built to replace the factory units on 2007–2013 Silverado 1500 and 2007–2014 Silverado 2500\/3500 HD models, offering chrome\/clear styling, LED DRL illumination, and plug‑and‑play installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as an OE-style replacement with modern LED DRL accents, this headlight pair updates the look and visibility of your Chevy Silverado without modifying factory harnesses. They combine a chrome housing and clear polycarbonate lens for a factory-fresh appearance, while using common bulb types (9005 high beam, H11 low beam, 4157NA turn signal) so you retain familiar serviceability.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my Silverado model and year?\u003c\/h3\u003e\n\u003cp\u003eThese headlights are specifically engineered for direct fitment on 2007–2013 Silverado 1500 and 2007–2014 Silverado 2500\/3500 HD trucks. They are not compatible with the 2007 Classic (old body) Silverado models. Always verify your truck’s body style and year before purchase to ensure proper alignment and mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2007–2013 Silverado 1500\u003c\/li\u003e\n  \u003cli\u003eCompatible: 2007–2014 Silverado 2500\/3500 HD\u003c\/li\u003e\n  \u003cli\u003eNot compatible: 2007 Classic (old body) models\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on replacement — no cutting or splicing required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these headlights install and what bulbs do they use?\u003c\/h3\u003e\n\u003cp\u003eInstallation is plug‑and‑play with OEM-style connectors and mounting points, so you can swap the units into the factory positions without custom wiring. They accept common, easy-to-source bulbs: 9005 for the high beam, H11 for the low beam, and 4157NA for the turn signal, keeping maintenance straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connectors for quick swap\u003c\/li\u003e\n  \u003cli\u003eUses 9005 high beam, H11 low beam, 4157NA turn signal bulbs\u003c\/li\u003e\n  \u003cli\u003eNo modifications needed for standard configurations\u003c\/li\u003e\n  \u003cli\u003eComes as a complete driver and passenger set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features do these headlights include?\u003c\/h3\u003e\n\u003cp\u003eConstruction combines a durable ABS plastic housing with a clear polycarbonate lens to resist impact and UV degradation while preserving optical clarity. The headlight assembly is built to withstand road vibration and typical weather exposure, making it suitable for everyday use and show purposes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS plastic housing for strength and heat resistance\u003c\/li\u003e\n  \u003cli\u003ePolycarbonate lens for scratch and impact resistance\u003c\/li\u003e\n  \u003cli\u003eChrome finish for long-lasting appearance\u003c\/li\u003e\n  \u003cli\u003eQuality fitment to reduce moisture intrusion when installed correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what should I expect after purchase?\u003c\/h3\u003e\n\u003cp\u003eThe package contains a complete pair of headlights — both driver and passenger units — ready for installation. These assemblies are intended as direct replacements for worn or outdated headlights and are suitable for truck owners who want improved styling and LED DRL visibility without complex aftermarket wiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete set: driver and passenger headlight assemblies\u003c\/li\u003e\n  \u003cli\u003ePre-wired sockets for the specified bulb types\u003c\/li\u003e\n  \u003cli\u003eChrome\/clear finish for upgraded factory look\u003c\/li\u003e\n  \u003cli\u003eIdeal for show vehicles or everyday replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These DNA MOTORING headlights are aimed at Silverado owners who want a straightforward, factory‑style upgrade: drivers replacing faded or damaged stock units, enthusiasts refreshing the truck’s front-end styling with LED DRL accents, and technicians who prefer direct replacement parts that bolt in using OEM mounting points. If you have a 2007–2013 Silverado 1500 or a 2007–2014 Silverado 2500\/3500 HD (non‑Classic), this pair offers a balance of modern appearance, durable construction, and simple installation. Confirm your model year and body type before ordering to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these headlights plug-and-play or do they need wiring mods?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are plug-and-play with OEM-style connectors and direct bolt-on fitment; no wiring modifications required for standard setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which bulb types do these assemblies use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They accept 9005 for high beam, H11 for low beam, and 4157NA for the turn signal bulbs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DNA MOTORING","offers":[{"title":"Default Title","offer_id":67584848658617,"sku":"B07GP22K3B","price":327.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dna-motoring-front-view-chrome-clear-headlights.jpg?v=1790456342"},{"product_id":"karsparehub-halogen-headlights-for-1999-2004-ford-f-250-f-350-f-450-f-550-excursion-oem-fit-bulbs-included","title":"KarSpareHub Halogen Headlights for 1999–2004 Ford F-250\/F-350\/F-450\/F-550 \u0026 Excursion — OEM-fit, Bulbs Included","description":"\u003cp\u003e\u003cstrong\u003eKarSpareHub halogen headlights engineered to replace the original lamps on 1999–2004 Ford F‑250, F‑350, F‑450, F‑550 and 2000–2004 Ford Excursion — OEM-fit, weatherproof, and bulbs included.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese direct-replacement halogen headlight assemblies are designed to match the original factory fit and function for specified Ford Super Duty trucks and Excursions. Each unit carries the matching OEM reference numbers and comes with halogen bulbs preinstalled, a UV-protected lens, and a sealed housing to limit moisture intrusion and lens yellowing. They are built to SAE standards and tested for airtightness so you regain reliable night visibility without modifying your vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these headlights match my truck's original specifications?\u003c\/h3\u003e\n\u003cp\u003eKarSpareHub headlights are modeled to the factory dimensions and mounting points associated with the OEM part numbers, ensuring bolt‑in compatibility. They fit halogen-equipped vehicles only and are not compatible with factory xenon\/HID or sealed‑beam setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM references: 2C3Z13008AA, 2C3Z13008AB, 2C3Z13200AA, 2C3Z13201AA.\u003c\/li\u003e\n  \u003cli\u003eYears\/models: 1999–2004 Ford F-250\/F-350\/F-450\/F-550 and 2000–2004 Ford Excursion.\u003c\/li\u003e\n  \u003cli\u003eHalogen models only; bulbs included and preinstalled.\u003c\/li\u003e\n  \u003cli\u003eNot for sealed‑beam or factory HID\/xenon systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these headlights resist fogging, leaks, and yellowing over time?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies use a PUR adhesive seal and undergo a 100% air‑tightness inspection to reduce moisture ingress and trapping. A UV optical coating on the lens slows yellowing and preserves clarity so the beam pattern stays consistent longer under sunlight exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePUR bonded housing for enhanced waterproofing.\u003c\/li\u003e\n  \u003cli\u003eOne‑way breathable film in the base to equalize pressure without letting moisture in.\u003c\/li\u003e\n  \u003cli\u003eUV optical lens coating to minimize yellowing and abrasion.\u003c\/li\u003e\n  \u003cli\u003eIndividual airtight inspection for quality control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow bright and road‑legal are these replacement headlights?\u003c\/h3\u003e\n\u003cp\u003eThese halogen assemblies are designed to meet SAE illumination guidelines and focus the beam for safe night driving when installed and aimed correctly. The reflector and lens geometry are engineered to produce a clear, usable beam pattern that matches the original output for halogen systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSAE-compliant optics and beam pattern control.\u003c\/li\u003e\n  \u003cli\u003eReflector design tuned for halogen bulbs provided in each unit.\u003c\/li\u003e\n  \u003cli\u003eLens clarity maintained by UV coating for consistent performance.\u003c\/li\u003e\n  \u003cli\u003eDelivered with bulbs to ensure immediate, correct light output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these headlights myself and what support is available?\u003c\/h3\u003e\n\u003cp\u003eYes — the assemblies are DIY-friendly and intended to install at home or by a professional without cutting or modification. If you want step‑by‑step help, reply \"DIY\" and we will provide detailed installation guidance including tools, connector checks, and aiming tips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt‑in design matching factory mounting points.\u003c\/li\u003e\n  \u003cli\u003ePreinstalled halogen bulbs; electrical connector compatibility retained.\u003c\/li\u003e\n  \u003cli\u003eOptional DIY installation instructions available on request.\u003c\/li\u003e\n  \u003cli\u003e3‑year limited warranty for defects with easy replacement\/refund process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These KarSpareHub halogen headlight assemblies suit owners of 1999–2004 Ford Super Duty trucks (F‑250, F‑350, F‑450, F‑550) and 2000–2004 Ford Excursions with factory halogen lighting who need a like‑for‑like replacement. Choose these if you want an OEM‑style fit, a waterproof sealed housing, and UV-protected lenses with bulbs included — ideal for restoring proper night visibility without custom wiring or body work. If your vehicle has factory xenon\/HID or sealed‑beam lights, please verify compatibility before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, each headlight comes with the halogen bulbs preinstalled for immediate plug‑in use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these compatible with HID\/xenon or sealed‑beam models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, these are for halogen models only and are not compatible with factory HID\/xenon or sealed‑beam systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KarSpareHub","offers":[{"title":"Default Title","offer_id":67584862552249,"sku":"B0DCZ5SD45","price":260.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/karsparehub-front-assembly-view.jpg?v=1790456856"},{"product_id":"karsparehub-headlight-assemblies-with-bulbs-for-2013-2015-nissan-altima-4-door-sedan-halogen-uv-protected-lenses","title":"KarSpareHub Headlight Assemblies with Bulbs for 2013-2015 Nissan Altima 4-Door Sedan — Halogen, UV-Protected Lenses","description":"\u003cp\u003e\u003cstrong\u003eThese KarSpareHub replacement headlight assemblies with bulbs are a direct-fit, OEM-quality swap designed for 2013–2015 Nissan Altima 4-door sedans (Base, S, SL, SV) that do not have factory HID\/Xenon headlights.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Altima needs restored front lighting, these assemblies are manufactured to match factory dimensions and electrical connections so they install cleanly and perform like the originals. They arrive with replacement halogen bulbs included, UV-protected lenses, and sealed housings that resist moisture and fogging. All units carry exact part references for easy cross-checking: OEM numbers 26060-3TA0A and 26010-3TA0A, and PARTSLINK NI2502208 and NI2503208.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my 2013–2015 Nissan Altima sedan?\u003c\/h3\u003e\n\n\u003cp\u003eYes, these assemblies are modeled to fit 4-door Altima sedans from 2013, 2014, and 2015 in Base, S, SL, and SV trims, provided your car does not have factory HID\/Xenon headlights. Compatibility was validated through dimensional and connector checks to ensure a plug-and-play replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 2013–2015 Altima 4-door: Base, S, SL, SV.\u003c\/li\u003e\n  \u003cli\u003eConfirmed OEM references: 26060-3TA0A, 26010-3TA0A.\u003c\/li\u003e\n  \u003cli\u003ePARTSLINK IDs: NI2502208, NI2503208 for verification.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with factory HID\/Xenon-equipped models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these headlights perform in wet or cold conditions?\u003c\/h3\u003e\n\n\u003cp\u003eThe housings use a durable PUR adhesive seal and undergo a complete air-tightness inspection to keep moisture and dust out. A breathable one-way film in the base balances internal pressure and humidity, reducing the chance of condensation after temperature swings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed with PUR adhesive for long-lasting waterproof protection.\u003c\/li\u003e\n  \u003cli\u003e100% air-tightness inspection on every unit.\u003c\/li\u003e\n  \u003cli\u003eOne-way breathable film prevents internal fogging.\u003c\/li\u003e\n  \u003cli\u003eUV optical coating resists lens yellowing over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat light output and bulbs are included?\u003c\/h3\u003e\n\n\u003cp\u003eEach headlight assembly ships with compatible halogen bulbs installed, ready to power up once connected. The lenses feature a UV-resistant coating to preserve clarity, and the assemblies meet SAE guidelines for safe, road-legal illumination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBulbs included — ready to install and use immediately.\u003c\/li\u003e\n  \u003cli\u003eUV coating protects lens clarity and maintains brightness.\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet SAE lighting standards.\u003c\/li\u003e\n  \u003cli\u003eDesigned for reliable nighttime visibility without modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these myself, and what warranty is offered?\u003c\/h3\u003e\n\n\u003cp\u003eThese headlights are designed for a straightforward replacement and can be installed by a DIYer or at any repair shop. If anything goes wrong under normal use within three years, KarSpareHub provides a repair, replacement, or refund process with simple proof of purchase and photos.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple plug-and-play design for easy installation.\u003c\/li\u003e\n  \u003cli\u003eDIY installation instructions available on request — reply \"DIY\" for guidance.\u003c\/li\u003e\n  \u003cli\u003e3-year limited coverage for defects during normal use.\u003c\/li\u003e\n  \u003cli\u003eClaims processed with order number and photos per warranty card.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers of 2013–2015 Nissan Altima 4-door sedans who need a dependable, factory-matching headlight replacement that includes bulbs and resists moisture, UV damage, and everyday wear. These assemblies suit owners seeking an OEM-referenced, plug-and-play solution—whether replacing a damaged headlight after a minor collision, upgrading a fogged lens, or refreshing aged lighting ahead of inspection season. If your Altima has factory HID\/Xenon headlights, choose a compatible HID-specific assembly instead; otherwise, these KarSpareHub units offer a straightforward, long-lasting replacement backed by a three-year coverage policy.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights work with Altima models that have HID\/Xenon?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These KarSpareHub assemblies are not compatible with factory HID\/Xenon systems; they fit halogen-equipped 2013–2015 Altima 4-door sedans only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included and are they road-legal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, bulbs are included with each assembly. The units are designed to meet SAE lighting standards for road use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KarSpareHub","offers":[{"title":"Default Title","offer_id":67584862847161,"sku":"B0DK1BGVMP","price":407.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/karsparehub-front-assembly-driver-side.jpg?v=1790456874"},{"product_id":"vizotae-headlights-for-1999-2002-chevy-silverado-direct-fit-replacement-with-sealed-waterproof-housing-and-included-high-low-bea","title":"Vizotae headlights for 1999–2002 Chevy Silverado — direct-fit replacement with sealed waterproof housing and included high\/low bea","description":"\u003cp\u003e\u003cstrong\u003eVizotae headlights are a direct-fit replacement for 1999–2002 Chevy Silverado models, delivering OEM-aligned fit, sealed waterproof construction, and included high\/low beam bulbs for dependable night driving.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement headlamp assemblies are built to match factory mounting points and part references for multiple Silverado and similar GM trucks, so you get a straightforward swap without major modifications. Each unit includes both high- and low-beam bulbs, a UV-protected lens, and a sealed housing that resists moisture and dust. The assembly follows OEM part numbers and PartLink cross-references, making it easy to confirm compatibility before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWill these Vizotae headlights fit my 1999–2002 Chevy Silverado?\u003c\/h3\u003e\n\u003cp\u003eYes — the assemblies are designed to align with the original mounting and electrical connections for many Silverado trims across the 1999–2002 model years, as well as selected Suburban and Tahoe years listed in the compatibility notes. Check your truck’s body style and trim level against the provided part numbers to ensure a match. If unsure, compare the OEM numbers or consult fitment resources.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM part numbers: 16526133, 16526134, 15199558, 15199559\u003c\/li\u003e\n  \u003cli\u003ePartLink references: GM2502187, GM2503187, GM2520173, GM2521173\u003c\/li\u003e\n  \u003cli\u003eCompatible models include many 1999–2002 Silverado 1500\/2500 and select 2000–2006 Suburban\/Tahoe years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these headlights handle wet or extreme conditions?\u003c\/h3\u003e\n\u003cp\u003eEach headlamp is assembled using a specialized PUR adhesive and passes a 100% airtightness inspection to reduce the risk of water intrusion. The housing employs a composite base with a one-way breathable film to equalize internal pressure and help prevent moisture buildup over time. The sealed construction plus UV-resistant lens coating keeps the headlight clear and reliable in rain, snow, or off-road environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePUR adhesive sealing for waterproof protection\u003c\/li\u003e\n  \u003cli\u003e100% airtightness quality check during manufacturing\u003c\/li\u003e\n  \u003cli\u003eOne-way breathable film to stabilize internal humidity and temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat light performance and longevity can I expect from these lamps?\u003c\/h3\u003e\n\u003cp\u003eThe lenses are treated with a UV optical coating to slow yellowing and maintain clarity, while the included high\/low beam bulbs provide balanced illumination for everyday driving. Assemblies are made to meet SAE visibility standards so they perform to recognized regulatory expectations. Proper alignment during installation will maximize road coverage and reduce glare for other drivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV optical coating to resist lens discoloration\u003c\/li\u003e\n  \u003cli\u003eIncludes both high-beam and low-beam bulbs\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet SAE visibility guidelines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what support is available?\u003c\/h3\u003e\n\u003cp\u003eThese units are intended for straightforward replacement and can be installed at a shop or by a competent DIYer using basic hand tools. The assemblies use factory-style mounting locations and electrical connectors to minimize the need for splicing or adapters. If you prefer step-by-step help, reply \"DIY\" to receive our detailed installation instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for bolt-on replacement\u003c\/li\u003e\n  \u003cli\u003eFactory-style electrical connections—no complex wiring\u003c\/li\u003e\n  \u003cli\u003eOptional DIY instructions available on request\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers restoring or maintaining late‑90s to early‑2000s Chevy trucks who want a reliable, factory-compatible headlight replacement with modern sealing and UV protection. These assemblies suit owners replacing faded or leaking stock units, technicians doing fleet repairs, and DIY enthusiasts who want an OEM-style fit without costly dealer parts. Note: only high- and low-beam bulbs are included; verify fitment using the listed part numbers before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, each assembly ships with both high-beam and low-beam bulbs included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty does Vizotae provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Vizotae offers a 3-year replacement or refund policy for defects from normal use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Vizotae","offers":[{"title":"Default Title","offer_id":67584863076537,"sku":"B0DZXH5SZH","price":214.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vizotae-front-assembly-chevy-silverado.jpg?v=1790456875"},{"product_id":"fomiuzy-tail-light-housings-for-ford-f-150-2015-2017-pair-oe-fit-clear-lens","title":"FOMIUZY Tail Light Housings for Ford F-150 2015-2017 Pair — OE Fit \u0026 Clear Lens","description":"\u003cp\u003e\u003cstrong\u003eFOMIUZY replacement rear taillight housings for 2015–2017 Ford F-150 provide direct-fit left and right assemblies that restore rear lighting function and appearance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your F-150’s taillight lenses are cracked, hazed, or have moisture inside, these aftermarket left (driver) and right (passenger) housings are built to match OE fit and restore proper light output. Each housing is manufactured from reinforced materials with high light transmission to help your brake, turn and backup signals read clearly to following traffic. These units are sold as housings that replace FO2800239 and FO2801239; wire harnesses and bulbs are not included unless specified.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these taillight housings fit my 2015–2017 Ford F-150?\u003c\/h3\u003e\n\u003cp\u003eThese housings are designed to match the original mounting points and dimensions of the 2015–2017 Ford F-150 models. They meet or exceed OEM specifications so installation uses the same fasteners and orientation as the factory units. Confirm the OE numbers FO2800239 or FO2801239 on your existing parts before purchasing to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for 2015, 2016, 2017 Ford F-150 models\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers FO2800239 and FO2801239\u003c\/li\u003e\n  \u003cli\u003eMounts to original attachment points—no custom fabrication\u003c\/li\u003e\n  \u003cli\u003eCheck existing part number before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and performance can I expect from these housings?\u003c\/h3\u003e\n\u003cp\u003eThe housings are made from reinforced, corrosion-resistant materials that resist wear and environmental damage. The lens is engineered for high optical clarity so that light is evenly dispersed and visible to other drivers. While bulbs and harnesses are not included, the clear lens and durable body protect internal components and help maintain signal visibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced, corrosion-resistant construction for long-term durability\u003c\/li\u003e\n  \u003cli\u003eCrystal-clear lens with high light transmittance\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce moisture intrusion and heat deformation\u003c\/li\u003e\n  \u003cli\u003eFactory-tested to meet or exceed OE standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included with the purchase and what additional parts will I need?\u003c\/h3\u003e\n\u003cp\u003eThis listing includes one left (driver side) rear housing and one right (passenger side) rear housing. Wire harnesses and bulbs are not included, so you will either reuse your existing hardware or purchase replacement bulbs and connectors separately. The housings are ready to bolt into place once bulbs and wiring are connected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: left and right rear housings (pair)\u003c\/li\u003e\n  \u003cli\u003eNot included: wire harnesses and bulbs—reuse or buy separately\u003c\/li\u003e\n  \u003cli\u003eInstallation requires basic hand tools and vehicle access to the taillight area\u003c\/li\u003e\n  \u003cli\u003eLifetime warranty provided by the seller for manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does warranty and quality support work with this part?\u003c\/h3\u003e\n\u003cp\u003eEach unit is factory-tested and backed by the seller's lifetime warranty against manufacturing defects. If the housings arrive damaged or fail under normal use, contact the seller for replacement assistance. Customer service aims to respond quickly and help resolve fitment or quality concerns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-tested to meet\/exceed OEM standards\u003c\/li\u003e\n  \u003cli\u003eLifetime warranty on manufacturing defects\u003c\/li\u003e\n  \u003cli\u003eSeller provides support for fitment and after-sales questions\u003c\/li\u003e\n  \u003cli\u003eClaims and inquiries handled via the seller’s customer service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This pair of FOMIUZY taillight housings is intended for Ford F-150 owners (model years 2015–2017) who need a straightforward, direct-fit replacement for cracked, faded, or water-damaged rear lenses. It’s also a practical option for DIYers and mechanics replacing housings without changing existing bulbs or wiring, and for anyone seeking a cost-effective aftermarket alternative to dealer parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these housings include bulbs and wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this listing includes only the left and right housings. Bulbs and wire harnesses must be reused from your vehicle or purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my 2017 Ford F-150?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, these housings are designed for 2015–2017 Ford F-150 models; confirm your existing part numbers FO2800239 or FO2801239 before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FOMIUZY","offers":[{"title":"Default Title","offer_id":67584864518329,"sku":"B0D61BGP6B","price":191.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fomiuzy-front-view-taillight-pair.jpg?v=1790456895"},{"product_id":"dna-motoring-replacement-headlight-pair-for-2003-2006-chevy-silverado-avalanche-black-clear-direct-fit-plug-and-play","title":"DNA MOTORING Replacement Headlight Pair for 2003-2006 Chevy Silverado \u0026 Avalanche — Black\/Clear, Direct-Fit Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eDNA MOTORING's black\/clear replacement headlight pair is a direct-fit, plug-and-play assembly designed to replace worn originals on select 2003–2007 Chevy Silverado and Avalanche models without factory cladding.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese headlight assemblies are built with durable ABS housings and clear polycarbonate lenses to deliver OEM-style appearance and dependable road illumination when paired with your existing bulbs. They are engineered for bolt-on installation, matching stock mounting points so you can swap them in without modifying wiring or brackets. Sold as a left-and-right pair, the units include bumper lights and accept 9005 high beam, 9006 low beam, and 3157A signal bulbs (bulbs not included).\u003c\/p\u003e\n\n\u003ch3\u003eWhich Chevy models will these headlights fit?\u003c\/h3\u003e\n\u003cp\u003eThey fit specific Silverado and Avalanche trucks from the early-to-mid 2000s, but only those equipped without the factory cladding option. Confirm the years and trim before purchasing to avoid fitment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2003–2006 Avalanche 1500\/2500; 2003–2006 Silverado 1500\/2500\/3500;\u003c\/li\u003e\n  \u003cli\u003eAlso fits certain 2007 Silverado Classic variants: 1500, 1500 HD, 2500 HD, 3500 Classic;\u003c\/li\u003e\n  \u003cli\u003eNot compatible with models that have original factory cladding — verify your truck’s exterior trim.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what hardware is required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone with basic automotive tools; these are engineered as direct replacements that use the stock bolt locations and factory connectors. No splicing or custom brackets are needed, though you should transfer or reuse your existing bulbs and wiring harness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play electrical connectors for simple hookup;\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on fitment matches OEM mounting points;\u003c\/li\u003e\n  \u003cli\u003eBulbs: reuse existing 9005 (high), 9006 (low), and 3157A (signal) bulbs — not included;\u003c\/li\u003e\n  \u003cli\u003eBasic tools (socket set, screwdrivers) typically sufficient for removal and reinstallation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features do these headlights have?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies combine impact-resistant ABS for the housing with a polycarbonate outer lens that resists chips and discoloration better than cheaper plastics. This construction balances weight, strength, and long-term clarity when properly maintained.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS plastic housing for structural strength and heat resistance;\u003c\/li\u003e\n  \u003cli\u003eClear polycarbonate lens for optical clarity and scratch resistance;\u003c\/li\u003e\n  \u003cli\u003eFactory-style seals and mounting points to resist moisture intrusion when installed correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these headlights match factory appearance and lighting performance?\u003c\/h3\u003e\n\u003cp\u003eDesigned to replicate the original styling and beam geometry, they present the same black\/clear aesthetic found on many OEM units. Lighting performance depends on the bulbs you use — reinstall your factory bulbs or upgrade to equivalent-spec replacements for best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack housing with clear lens preserves factory look and curb appeal;\u003c\/li\u003e\n  \u003cli\u003eAccepts standard bulb sizes to match original beam patterns;\u003c\/li\u003e\n  \u003cli\u003ePair includes both left and right units plus bumper lights for a consistent front-end appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This headlight pair is ideal for owners of 2003–2007 Chevy Silverado or Avalanche trucks without factory cladding who need a direct-fit replacement to restore front-end appearance and function. It suits DIY mechanics, restoration projects, and anyone replacing yellowed or damaged lenses who wants an OEM-like upgrade without modifying the vehicle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, bulbs are not included. They accept 9005 (high), 9006 (low), and 3157A (signal) bulbs—reuse your existing bulbs or buy replacements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these on a Silverado with factory cladding?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These assemblies are only compatible with models without factory cladding. Verify your truck’s trim before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DNA MOTORING","offers":[{"title":"Default Title","offer_id":67584864747705,"sku":"B07D4YW57W","price":234.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dna-motoring-front-assembly-pair.jpg?v=1790456894"},{"product_id":"luxbang-remote-led-search-light-for-trucks-boats-white-50w-5000-lm-360-rotating-with-auto-reset","title":"LuxBang Remote LED Search Light for Trucks \u0026 Boats — White 50W, 5000 lm, 360° Rotating with Auto-Reset","description":"\u003cp\u003e\u003cstrong\u003eLuxBang Remote LED Search Light is a powerful, weather-resistant 50W spotlight with 5000 lumens, 360° horizontal and 120° vertical rotation, auto-reset home position, and wireless remote control for trucks, boats, and outdoor use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for demanding outdoor tasks, the LuxBang Remote LED Search Light combines high-output LED performance with rugged materials and versatile mounting options. It runs on 12V–24V systems and offers a bright, focused 6000K beam useful for night navigation, search and rescue, off-road work, and recreational activities. The unit’s patented functions — including automatic return-to-home, SOS strobe, and wide-angle sweep — are built into a compact housing made from ABS and aluminum alloy to resist corrosion and impact.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright is this spotlight and what beam characteristics can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe LuxBang lamp uses high-quality 6000K LED chips rated at 50W and produces up to 5000 lumens, giving a crisp white light suitable for long-range spotting and close-in area illumination. The light balance favors clarity and contrast rather than color rendering, making it ideal for identifying objects at night.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50W power draw with premium LED chips\u003c\/li\u003e\n  \u003cli\u003eApprox. 5000 lumens output for clear visibility\u003c\/li\u003e\n  \u003cli\u003eCool white 6000K color temperature for high contrast\u003c\/li\u003e\n  \u003cli\u003eFocused beam suitable for both distance and area scanning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the rotation and auto-reset work for search tasks?\u003c\/h3\u003e\n\u003cp\u003eThe light rotates 360° horizontally and tilts 120° vertically to cover wide areas without repositioning the vehicle. When switched off, it automatically returns to a pre-set home position so the mount stays consistent and predictable for repeated use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull 360° horizontal sweep for panoramic coverage\u003c\/li\u003e\n  \u003cli\u003e120° vertical tilt for angled searching and elevation changes\u003c\/li\u003e\n  \u003cli\u003eAuto-reset returns head to home position on power off\u003c\/li\u003e\n  \u003cli\u003e180° automatic searching mode available for timed sweeps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does mounting and power connection work on trucks and boats?\u003c\/h3\u003e\n\u003cp\u003eMounting is flexible: the base includes six powerful magnets with rubber padding for temporary non-damaging attachment, and there are screw points for permanent installations that withstand high speeds. The spotlight accepts 12V–24V input, so it connects directly to standard vehicle and marine electrical systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix strong, rubber-padded magnets for secure temporary mounting\u003c\/li\u003e\n  \u003cli\u003eScrew-mount option for permanent, high-speed attachment\u003c\/li\u003e\n  \u003cli\u003eCompatible with 12V and 24V electrical systems\u003c\/li\u003e\n  \u003cli\u003eNon-abrasive base protects vehicle and boat finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat remote and safety features does the LuxBang spotlight include?\u003c\/h3\u003e\n\u003cp\u003eThe unit ships with a wireless remote that operates up to about 100 meters (328 feet) unobstructed, letting you control sweep, tilt, and strobe modes from a distance. Built-in practical modes include SOS strobe and automatic scanning patterns to support visibility and signaling during emergencies or routine operations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWireless remote control with up to 100 m (328 ft) range line-of-sight\u003c\/li\u003e\n  \u003cli\u003eSOS strobe and multiple scan modes for signaling or searching\u003c\/li\u003e\n  \u003cli\u003ePatented design for reliable automatic behaviors and durability\u003c\/li\u003e\n  \u003cli\u003eRugged ABS and aluminum alloy housing for weather resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The LuxBang Remote LED Search Light is aimed at drivers, mariners, outdoor professionals, and recreational users who need a high-output, durable, and flexible lighting solution. It suits search-and-rescue teams, off-road enthusiasts, boaters navigating at night, and anyone who wants a robust spotlight they can mount temporarily with magnets or secure permanently with screws. If you need a bright, remotely controlled light with wide-angle scanning and marine-grade construction, this model balances power, mobility, and practical features.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the LuxBang search light waterproof for marine use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s built with ABS and aluminum alloy for weather resistance suitable for marine environments, though avoid prolonged submersion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this spotlight permanently on a truck roof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — use the screw-mount points for permanent installation; the magnetic base is for temporary, non-damaging attachment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LuxBang","offers":[{"title":"Default Title","offer_id":67584865403065,"sku":"B0FHFLR9GQ","price":263.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/luxbang-front-view-spotlight-on-vehicle.jpg?v=1790456918"},{"product_id":"luxbang-50w-remote-spot-light-for-trucks-boats-360-rotating-6-magnet-black-5-000-lumens-auto-reset","title":"LuxBang 50W Remote Spot Light for Trucks \u0026 Boats — 360° Rotating, 6-Magnet Black, 5,000 Lumens, Auto-Reset","description":"\u003cp\u003e\u003cstrong\u003eLuxBang Remote Spot Lights are a portable, 50W LED searchlight with 360° rotation, a 6-magnet base and wireless remote control designed for trucks, boats and outdoor rescue or adventure use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to handle demanding outdoor work, this spotlight blends bright, focused illumination with rugged materials and flexible mounting. It runs on 12–24V systems, delivers up to 5,000 lumens from 6000K LEDs, and returns to a preset “home” position automatically when switched off — useful for repeatable search patterns and fast night operations.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright is this light and what can it be used for?\u003c\/h3\u003e\n\u003cp\u003eThe LuxBang spotlight uses high-efficiency 50W LED chips that produce around 5,000 lumens at a daylight-like 6000K color temperature. That output is strong enough for search-and-rescue tasks, off-road navigation, nighttime fishing and campsite illumination. The focused beam reduces scatter while the strobe and SOS modes add safety signaling options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e50W power with 6000K color balance for clear, high-contrast illumination\u003c\/li\u003e\n  \u003cli\u003eApproximately 5,000 lumens intensity for long-range spotting\u003c\/li\u003e\n  \u003cli\u003eSOS and strobe modes for emergency signaling\u003c\/li\u003e\n  \u003cli\u003eSuitable for hunting, marine use, off-road, and rescue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the mounting and auto-reset function work?\u003c\/h3\u003e\n\u003cp\u003eMounting is quick and non-invasive: the unit has six strong built-in magnets with protective rubber pads that secure to metal surfaces without scratching paint. For permanent installs at high speed, you can also bolt it down using the mounting holes. The light's auto-reset returns the head to a programmed home position when powered off so subsequent activations start from a known orientation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix powerful magnets plus rubber pads for temporary attachment\u003c\/li\u003e\n  \u003cli\u003eBolt-down option for permanent, high-speed mounting\u003c\/li\u003e\n  \u003cli\u003eAutomatic reset to a saved home position on power-off\u003c\/li\u003e\n  \u003cli\u003eWorks reliably at highway speeds when permanently fastened\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat controls and motion ranges does the spotlight offer?\u003c\/h3\u003e\n\u003cp\u003eThe spotlight rotates 360° horizontally and tilts up to 120° vertically, giving wide coverage without re-positioning the vehicle. A wireless remote provides up to 100 meters (328 feet) of unobstructed control, letting you pan, tilt, activate strobe\/SOS modes or send the head back to its resting position from a distance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull 360° horizontal rotation and 120° vertical tilt\u003c\/li\u003e\n  \u003cli\u003eWireless remote with up to 100 m \/ 328 ft range outdoors\u003c\/li\u003e\n  \u003cli\u003eProgrammable search sweep and 180° automatic searching mode\u003c\/li\u003e\n  \u003cli\u003eRemote-controlled strobe and SOS signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the construction durable enough for marine and off-road use?\u003c\/h3\u003e\n\u003cp\u003eLuxBang designed the unit with ABS and aluminum alloy to resist impacts, vibration and outdoor exposure. Seals, rugged housing and industrial-grade components help it stand up to salt spray, mud, and the bumps of off-road travel, while the compact form factor keeps weight and wind load low.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRugged ABS plastic with aluminum alloy elements for strength\u003c\/li\u003e\n  \u003cli\u003eWeather-resistant design for marine and outdoor environments\u003c\/li\u003e\n  \u003cli\u003eLightweight shape minimizes aerodynamic drag\u003c\/li\u003e\n  \u003cli\u003eBuilt for repeated heavy-duty use and field conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you need a high-output, flexible searchlight that installs quickly and can be controlled from a distance, the LuxBang Remote Spot Light suits boaters, overlanders, emergency responders, hunters and vehicle owners who want reliable, repeatable illumination. It’s ideal when you want a bright, directional beam with multiple mounting options and remote programmability, not just a fixed floodlight.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the spotlight work on both 12V and 24V systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The LuxBang spotlight is compatible with 12V and 24V vehicle and marine electrical systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How far does the remote control reach?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The wireless remote operates up to about 100 meters (328 feet) in open, unobstructed conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LuxBang","offers":[{"title":"Default Title","offer_id":67584865599673,"sku":"B0FHDLXWPC","price":263.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/luxbang-front-angled-spotlight.jpg?v=1790456916"},{"product_id":"weelmoto-headlight-assembly-for-1997-2003-f-150-f-250-expedition-halogen-with-high-low-bulbs-direct-fit-dot-compliant","title":"WEELMOTO Headlight Assembly for 1997–2003 F-150\/F-250\/Expedition — Halogen with High\/Low Bulbs, Direct-Fit DOT-Compliant","description":"\u003cp\u003e\u003cstrong\u003eWEELMOTO's direct-fit halogen headlight assembly replaces worn or damaged units on compatible 1997–2003 Ford F-150, F-250 and Expedition models, delivering DOT-compliant illumination and included high\/low beam bulbs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your original headlight has clouding, cracks or electrical issues, this aftermarket replacement is engineered to match factory fit, mounting points and beam pattern so you can swap it in without major modifications. The assembly is produced under an IATF16949 quality system and tested for durability against vibration, drops, rain, UV and dust to help it withstand everyday driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWill this headlight fit my truck?\u003c\/h3\u003e\n\u003cp\u003eThis WEELMOTO assembly is built to align with OEM numbers 3L3Z13008CA, 3L3Z13008DA, F75Z13201AC and F75Z13200AC and fits a range of late-1990s to early-2000s Ford models when matched to the vehicle submodel and production date. It is intended for specific trims and body styles—check your vehicle’s year, trim and production date before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 1997–2002 Ford Expedition (Eddie Bauer, XLT)\u003c\/li\u003e\n  \u003cli\u003eFits select 1997–2003 F-150 and 1997–1999 F-250 Light Duty models (see OEM numbers)\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2000 F-150 Harley-Davidson and 1999–2000 Lightning editions\u003c\/li\u003e\n  \u003cli\u003eNot compatible with F-150 SVT models or vehicles outside listed configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the assembly perform in real-world driving?\u003c\/h3\u003e\n\u003cp\u003eWEELMOTO designs the reflector and lens to meet SAE beam-shaping guidelines, producing a focused, bright pattern for both high and low beams. The housing materials and seals are validated with lab tests—vibration, drop, UV exposure, sand and water spray—to reduce premature failure from environmental stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered reflector for clear beam control and reduced glare\u003c\/li\u003e\n  \u003cli\u003eDOT-compliant output for legal road use in many regions\u003c\/li\u003e\n  \u003cli\u003eLab-tested against vibration, impacts, UV and moisture ingress\u003c\/li\u003e\n  \u003cli\u003eDurable materials chosen for longer service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe unit ships with both high and low beam halogen bulbs preinstalled, while turn signal bulbs are not included. The housing follows the factory mounting pattern and includes a plug-and-play connector and an installation manual to simplify the swap; basic hand tools are typically all that’s required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh and low beam halogen bulbs included for immediate use\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connector and factory-style mounting points\u003c\/li\u003e\n  \u003cli\u003eInstallation manual with step-by-step guidance\u003c\/li\u003e\n  \u003cli\u003eThree-year limited peace-of-mind coverage and customer support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this a quality replacement compared to OEM?\u003c\/h3\u003e\n\u003cp\u003eManufactured under a certified quality system (IATF16949) and designed to meet regulatory standards, this assembly aims to provide a comparable replacement at aftermarket value. Performance attributes focus on matching factory fit, beam pattern and durability rather than cosmetic novelty.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eISO\/IATF-certified production controls for consistent builds\u003c\/li\u003e\n  \u003cli\u003eSAE\/DOT-compliant lighting performance for safety-focused design\u003c\/li\u003e\n  \u003cli\u003eDurability testing to extend serviceable life on the vehicle\u003c\/li\u003e\n  \u003cli\u003eDirect-fit form for minimal adjustments during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This headlight is intended for owners of compatible 1997–2003 Ford F-150, F-250 Light Duty and Expedition models who need a reliable, DOT-compliant replacement that mirrors factory fit and beam characteristics. It suits DIY mechanics and professional installers looking for a tested aftermarket option with included halogen bulbs and clear installation guidance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this headlight include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — high and low beam halogen bulbs are included; turn signal bulbs are not.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit my 1999 F-150 Lightning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this assembly is listed as compatible with 1999–2000 F-150 Lightning models when matched to OEM numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WEELMOTO","offers":[{"title":"Default Title","offer_id":67584866058425,"sku":"B0C1NBL85V","price":235.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/weelmoto-front-assembly.jpg?v=1790456951"},{"product_id":"weelmoto-black-headlight-assemblies-for-1997-2003-f-150-f-250-with-integrated-corner-light-dot-compliant","title":"WEELMOTO Black Headlight Assemblies for 1997–2003 F-150\/F-250 with Integrated Corner Light, DOT-Compliant","description":"\u003cstrong\u003eWEELMOTO black headlight assemblies with integrated corner lights give a direct-fit replacement for many 1997–2003 Ford F-150, F-250 and Expedition models, restoring factory fit and upgraded illumination.\u003c\/strong\u003e\n\n\u003cp\u003eIf your truck needs a reliable headlight swap that matches original mounting points and electrical connections, these WEELMOTO units are engineered as direct replacements for specified model years and submodels. Built to meet DOT and SAE design criteria and manufactured under an IATF16949-aligned process, the assemblies aim to deliver consistent beam patterns, durable construction, and an authentic appearance that complements older Ford trucks.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my 1997–2003 Ford model?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are designed to match specific OEM part numbers and many New Body Style vehicles from 1997 through 2003. Fitment depends on year, submodel and production date; review your vehicle’s specific listing and the OEM numbers to confirm compatibility prior to purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM references: 3L3Z13008CA, 3L3Z13008DA, F75Z13201AC, F75Z13200AC.\u003c\/li\u003e\n  \u003cli\u003eCovers many 1997–2000 and 2001–2003 F-150 variants (Base, Lariat, XL, XLT), selected F-250 years, and 1997–2002 Expeditions.\u003c\/li\u003e\n  \u003cli\u003eProduction date restrictions apply (e.g., some 1997 models require production after July 1996).\u003c\/li\u003e\n  \u003cli\u003eTurn signal bulbs are not included; use stock bulbs during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant are these replacement headlights?\u003c\/h3\u003e\n\u003cp\u003eWEELMOTO tests each assembly against common environmental stresses—such as vibration, drop impacts, UV exposure, dust and moisture—to ensure long-term performance. Materials and seals are selected to withstand typical driving conditions and maintain optical clarity over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop, vibration, rain, ultraviolet, sand and dust spray tested for resilience.\u003c\/li\u003e\n  \u003cli\u003eSealed housings minimize water intrusion and fogging risk when properly installed.\u003c\/li\u003e\n  \u003cli\u003eHigh-durability materials chosen to reduce cracking and yellowing.\u003c\/li\u003e\n  \u003cli\u003eManufactured within a quality system compliant with IATF16949 standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these headlights meet legal and lighting performance standards?\u003c\/h3\u003e\n\u003cp\u003eThe lamp optics are engineered to produce a reliable beam pattern that aligns with SAE recommendations while meeting DOT compliance for road use in the U.S. This helps ensure predictable cutoff and spread for safer nighttime driving when installed and adjusted correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSAE-patterned optics for balanced high\/low beam distribution.\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet Department of Transportation (DOT) requirements.\u003c\/li\u003e\n  \u003cli\u003eEngineered light pattern aims for super-bright performance without excessive glare.\u003c\/li\u003e\n  \u003cli\u003eProfessional manufacturing processes used to maintain consistent output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eThese are plug-and-play assemblies intended to replace the factory units with minimal modification on compatible models. WEELMOTO supplies an installation manual and includes high\/low beam bulbs; however, turn signal bulbs are excluded, and the installer should verify bulb types and harness compatibility before starting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play design for direct mounting to original factory points.\u003c\/li\u003e\n  \u003cli\u003eHigh and low beam bulbs included; turn signal bulbs must be reused or purchased separately.\u003c\/li\u003e\n  \u003cli\u003eInstallation manual provided; professional installation recommended if unfamiliar with headlamp wiring.\u003c\/li\u003e\n  \u003cli\u003eOne-to-one customer service support and a 3-year coverage window for product issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These WEELMOTO assemblies suit classic Ford truck owners who want a correct-fit, DOT-compliant replacement that improves lighting performance and renews the front-end appearance. They are ideal for restoration projects, daily drivers with aging lamps, and anyone seeking reliable, tested headlight assemblies that align with specific OEM part numbers for 1997–2003 F-150, F-250 and Expedition models.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included with these headlights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: High and low beam bulbs are included; turn signal bulbs are not.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights meet DOT standards?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The assemblies are designed to meet DOT requirements and SAE lighting patterns.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WEELMOTO","offers":[{"title":"Default Title","offer_id":67584865927353,"sku":"B0DK1SG2LF","price":234.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/weelmoto-front-assembly-view.jpg?v=1790456946"},{"product_id":"karsparehub-headlight-assembly-for-dodge-ram-1500-classic-2009-2012-direct-fit-uv-coated-sealed-lens","title":"KarSpareHub Headlight Assembly for Dodge Ram 1500 Classic (2009-2012) — Direct-Fit, UV-Coated Sealed Lens","description":"\u003cp\u003e\u003cstrong\u003eKarSpareHub headlights are direct-replacement headlamp assemblies engineered to restore factory fit, sealed weather resistance, and clear night visibility for select Dodge Ram Classic models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese headlight assemblies are produced to match OEM fit and function for specific Dodge Ram Classic pickups, offering a sealed lens, UV-resistant coating, and straightforward installation. They are intended as replacements for the original low\/high beam housings (OEM numbers include 55277409AD, 55277410) and are tested for compatibility with a range of Ram 1500, 2500 and 3500 Classic body styles. Built with a breathable base and a secure PUR adhesive seal, they resist moisture intrusion while protecting the lens from premature yellowing.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Dodge Ram models will these lights fit?\u003c\/h3\u003e\n\u003cp\u003eThese units are designed for specific Dodge Ram Classic body styles and adhere closely to the original mounting points and electrical connectors. They do not fit every Ram produced during the same years, so verifying model and headlight type is important before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2009–2012 Dodge Ram 1500 Classic body styles.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2010–2018 Dodge Ram 2500 and 3500 (Classic body style) models only.\u003c\/li\u003e\n  \u003cli\u003eFits 2009–2012 Ram trims such as ST, SLT, TRX, Laramie and Longhorn where Classic housings were used.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with factory projector LED style headlights, Quad Beam models, or 2010-up Ram projector housings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant are these headlamps?\u003c\/h3\u003e\n\u003cp\u003eDurability is engineered into the assembly through multi-layer protection and rigorous sealing procedures. The lens receives a UV optical coating to slow discoloration, while the housing uses a PUR adhesive seal and an air-tightness test to reduce the risk of leaks or fogging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed with industry-grade PUR adhesive and verified via 100% air-tightness inspection.\u003c\/li\u003e\n  \u003cli\u003eUV optical coating on the lens helps resist yellowing and clarity loss.\u003c\/li\u003e\n  \u003cli\u003eComposite base with a one-way breathable film to stabilize internal humidity and temperature.\u003c\/li\u003e\n  \u003cli\u003eMeets SAE guidelines for on-road use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I need to know about installation and bulbs?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward: these are direct-replacement assemblies that align with original mounting points and connectors. Only the low and high beam bulbs are included; any additional bulbs or accessories must be retained from the original unit or purchased separately.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for simplified bolt-on replacement — no cutting or modification required for compatible models.\u003c\/li\u003e\n  \u003cli\u003eIncludes assemblies with only low\/high beam bulb provisions; turn signal or parking bulbs may not be included.\u003c\/li\u003e\n  \u003cli\u003eCan be installed at home by a competent DIYer or by a professional at a repair shop.\u003c\/li\u003e\n  \u003cli\u003eReply \"DIY\" to request detailed installation guidance from the seller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and after-sale support are offered?\u003c\/h3\u003e\n\u003cp\u003eKarSpareHub backs these headlights with a limited coverage period to protect against defects arising from normal use. The warranty process requires order information and photographs to confirm the condition; a replacement or refund can be initiated if terms are met.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3-year coverage for damage occurring during normal use; terms detailed on the included warranty card.\u003c\/li\u003e\n  \u003cli\u003eHassle-free refund or replacement begins with your order number and photos of the issue.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment questions and post-sale assistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These KarSpareHub headlamps are aimed at owners of Dodge Ram Classic trucks (2009–2012 1500 and compatible 2500\/3500 Classic models) who want a like-for-like replacement with OEM-style fit, improved lens protection, and an airtight sealed housing. Choose these assemblies if you need dependable, factory-aligned headlights that resist moisture and UV damage and if you prefer a part that’s tested for correct alignment and mounting on eligible Ram Classic body styles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights fit 2013–2018 Dodge Ram models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit certain 2013–2018 Ram models only when the Classic body style and matching headlight housing are used; verify your vehicle’s body style first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included with the assemblies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only the low and high beam bulb locations are provided; additional bulbs or LEDs are not included and must be supplied separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KarSpareHub","offers":[{"title":"Default Title","offer_id":67584868778169,"sku":"B0D48MWVJD","price":281.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/karsparehub-headlight-front-assembly.jpg?v=1790456992"},{"product_id":"sealight-9005-9006-led-headlight-bulbs-pack-of-4-6500k-cool-white-100-000lm-equivalent-with-15-000rpm-fan","title":"SEALIGHT 9005\/9006 LED Headlight Bulbs Pack of 4 — 6500K Cool White, 100,000LM Equivalent with 15,000RPM Fan","description":"\u003cp\u003e\u003cstrong\u003eSEALIGHT 9005\/9006 LED bulbs are high-output, plug-and-play replacement headlights that deliver bright 6500K cool-white light with advanced cooling and wide vehicle compatibility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade your vehicle’s lighting to LEDs designed to mimic halogen fitment while providing far greater lumen output and a cleaner white color temperature. These SEALIGHT bulbs combine a slim LED chip layout, aerospace-grade housing and a high-speed cooling fan to improve beam focus, reduce glare, and run reliably in demanding conditions. They come as a pack of four and include a decoder for improved electrical compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these SEALIGHT 9005\/9006 bulbs compared with stock halogens?\u003c\/h3\u003e\n\n\u003cp\u003eThese LED replacements produce dramatically higher light output than typical halogen bulbs, increasing visible brightness and range. The higher lumen rating and 6500K color produce a crisp, cool-white beam that helps reveal road details more clearly at night.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRated luminous output designed to outshine standard halogens by multiple times\u003c\/li\u003e\n  \u003cli\u003e6500K color for neutral-cool daylight appearance\u003c\/li\u003e\n  \u003cli\u003eOptimized chip placement for a focused beam pattern\u003c\/li\u003e\n  \u003cli\u003eImproved visibility for road signs and lane edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs fit my car, and how easy is installation?\u003c\/h3\u003e\n\n\u003cp\u003eSEALIGHT designed these 9005\/9006 bulbs to closely follow the physical profile of halogen lamps, so most installs are plug-and-play and take only minutes. A built-in smart Canbus system and included decoder reduce the chance of error codes or flicker on modern vehicles, though a few specialty models may require the extra decoder provided.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit HB3\/HB4 (9005\/9006) connectors for most cars and trucks\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play design typically installs in under five minutes\u003c\/li\u003e\n  \u003cli\u003eIncluded decoder for improved electrical compatibility\u003c\/li\u003e\n  \u003cli\u003eConfirm bulb type for your vehicle before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these bulbs manage heat and longevity?\u003c\/h3\u003e\n\n\u003cp\u003eHeat control is handled through a combination of an aerospace-grade aluminum body, a precision heat sink, and a high-speed 15,000 RPM cooling fan. This active cooling architecture keeps junction temperatures lower, supporting longer operating life and consistent light output across extended driving periods.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAerospace-grade aluminum housing for rapid heat transfer\u003c\/li\u003e\n  \u003cli\u003eEngineered heat sink profile to disperse warmth effectively\u003c\/li\u003e\n  \u003cli\u003e15,000 RPM turbo fan for active thermal management\u003c\/li\u003e\n  \u003cli\u003eDesigned life measured in tens of thousands of hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these bulbs weatherproof and durable enough for daily driving?\u003c\/h3\u003e\n\n\u003cp\u003eYes. The bulbs are sealed to resist water and dust ingress and are rated to withstand typical road conditions. Robust construction and corrosion-resistant materials help them survive moisture, vibration and fluctuating temperatures encountered during normal use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP68-rated protection against dust and water\u003c\/li\u003e\n  \u003cli\u003eDurable finish and corrosion-resistant components\u003c\/li\u003e\n  \u003cli\u003eStable operation across variable temperatures\u003c\/li\u003e\n  \u003cli\u003eBuilt for routine driving and adverse weather\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a simple, high-impact lighting upgrade without altering housings or beam geometry will benefit most. These SEALIGHT 9005\/9006 bulbs suit commuters, night-shift drivers, off-roaders and anyone seeking whiter, more intense illumination with easy installation and broad vehicle compatibility. Always verify your vehicle’s required bulb type and local lighting regulations before upgrading.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these SEALIGHT bulbs fit directly into my 9005\/9006 sockets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these are direct-fit 9005\/9006 (HB3\/HB4) replacements and typically install in minutes. Confirm your vehicle’s bulb type first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will my car show dashboard errors after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most vehicles will not show errors thanks to the built-in Canbus system and included decoder; a few special models may need the extra decoder.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SEALIGHT","offers":[{"title":"Default Title","offer_id":67584870187193,"sku":"B0F5HXC7BZ","price":163.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/seilight-front-packaging-quartet.jpg?v=1790457075"},{"product_id":"dna-motoring-black-amber-headlights-lower-bumper-lights-oe-fit-for-1999-2006-silverado-tahoe-suburban-direct-replacement","title":"DNA MOTORING Black Amber Headlights \u0026 Lower Bumper Lights — OE-Fit for 1999–2006 Silverado\/Tahoe\/Suburban, Direct Replacement","description":"\u003cp\u003e\u003cstrong\u003eThese DNA MOTORING black-amber headlamps and matching lower bumper lights replace the factory units on compatible Chevy\/GMC trucks for a direct-fit upgrade that improves front-end style and restores full lighting functionality.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace worn, yellowed, or outdated front lighting on late‑90s and early‑2000s GM trucks with a matched set designed to fit OE openings and wiring. The kit bundles both headlight assemblies and lower bumper lights engineered to line up with the original grille, delivering a cohesive look without body modifications. They accept standard 9005 (high beam) and 9006 (low beam) bulbs so you can reuse common bulbs or upgrade to your preferred light source (bulbs not included).\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my Silverado or Tahoe\/Suburban?\u003c\/h3\u003e\n\u003cp\u003eThese lamps are engineered for specific model years and trims. They fit 1999–2002 Silverado (1500\/2500 and select HD models) and 2000–2006 Suburban\/Tahoe 1500\/2500 when the vehicle does not have factory body cladding. Verify your truck’s year and whether it shipped with cladding before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 1999–2002 Silverado 1500\/2500; 2001–2002 Silverado HD models noted.\u003c\/li\u003e\n  \u003cli\u003eAlso fits: 2000–2006 Suburban\/Tahoe (1500\/2500).\u003c\/li\u003e\n  \u003cli\u003eNot compatible with vehicles that have factory body cladding—measure and check trim first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what will I need?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies are built for OE-style plug-and-play replacement, so no cutting or drilling should be necessary. That said, front-end removal and reassembly on these GM trucks can be involved; professional installation is recommended for correct alignment and watertight sealing. The product ships without step-by-step instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OE fitment—connectors match factory plugs.\u003c\/li\u003e\n  \u003cli\u003eBulbs are not supplied; requires 9005 and 9006 bulbs per side.\u003c\/li\u003e\n  \u003cli\u003eExpect tasks like bumper\/grille removal for access—shop tools or pro help advised.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and compliance standards do these lights meet?\u003c\/h3\u003e\n\u003cp\u003eThese lights are manufactured to meet S.A.E. and D.O.T. regulations, providing lawful on‑road use and reliable visibility when properly installed with the correct bulbs. They are also made to align with common OEM part numbers for compatibility and replacement accuracy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eS.A.E. and D.O.T. certified for street legality.\u003c\/li\u003e\n  \u003cli\u003eMatched to OEM part numbers for straightforward replacement.\u003c\/li\u003e\n  \u003cli\u003eIncludes both headlamps and lower bumper lamps for consistent front-end appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the cosmetic details and finish options?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies feature a black housing with amber reflectors for a modern, aggressive appearance that complements many truck styles. The lower bumper lights are designed to line up with the OE grille for a factory-like result, giving your truck a refreshed look without aftermarket gap or fit issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack housing with amber accent reflectors for contrast.\u003c\/li\u003e\n  \u003cli\u003ePrecision mounting points to reduce fitment gaps.\u003c\/li\u003e\n  \u003cli\u003eComplete set includes both headlight pair and matching bumper lights.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This kit is aimed at owners of late‑1990s and early‑2000s Chevrolet and GMC trucks who need a like‑for‑like headlight replacement or want to refresh the front end with a coordinated look. It's ideal for restorations, show trucks, daily drivers needing improved appearance, or anyone replacing cracked, fogged, or non‑functional factory lighting. Confirm your model year and lack of factory cladding before purchase, and plan for bulb selection and professional installation if you want a precise, long‑lasting result.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lights include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, bulbs are not included. The housings accept standard 9005 (high) and 9006 (low) bulbs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are direct-fit units, but front-end disassembly can be complex—professional installation is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DNA MOTORING","offers":[{"title":"Default Title","offer_id":67584882704569,"sku":"B01KTSFHJQ","price":211.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dna-motoring-front-packaging-headlight-kit.jpg?v=1790457558"},{"product_id":"partsam-glass-watermelon-mirror-turn-signal-marker-lights-2-pack-amber-blue-led-stainless-steel-bracket","title":"Partsam Glass Watermelon Mirror Turn Signal Marker Lights, 2-Pack Amber\/Blue LED, Stainless Steel Bracket","description":"\u003cp\u003e\u003cstrong\u003ePartsam 2-piece glass watermelon mirror lights are dual-color (amber\/blue) LED turn-signal markers with a stainless steel bracket designed to replace or upgrade Kenworth, Peterbilt, Freightliner and other 12V heavy-truck mirror indicators.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese patented watermelon-style marker lights combine a pure glass lens with high-output LEDs to create a distinct starburst beam pattern visible day or night. Built for heavy-duty trucking, each lamp mounts to the mirror with a corrosion-resistant stainless steel bracket and meets IP65 waterproofing standards so it withstands road vibration, rain, and grime while adding a visible warning signal and optional under-glow effect.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these lights improve mirror visibility when turning?\u003c\/h3\u003e\n\u003cp\u003eThe dual-color LEDs switch between amber for turn signaling and blue for styling or marker use, producing a clean, easy-to-see signal that helps other drivers identify your vehicle’s intent. The glass lens sharpens the beam into a starburst pattern that stands out from standard plastic markers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAmber output for conventional turn signaling and legal visibility\u003c\/li\u003e\n  \u003cli\u003eBlue option for accent\/marker lighting when permitted\u003c\/li\u003e\n  \u003cli\u003eGlass lens increases light clarity and definition\u003c\/li\u003e\n  \u003cli\u003ePatented LED arrangement for a consistent starburst pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre they durable enough for commercial trucks and harsh weather?\u003c\/h3\u003e\n\u003cp\u003eYes — the housing and mounting bracket use stainless steel for corrosion resistance, and the IP65 rating protects internal components from dust and low-pressure water jets. The solid glass lens resists scratching and preserves optics even after prolonged exposure to road debris.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel bracket resists rust and holds under vibration\u003c\/li\u003e\n  \u003cli\u003eIP65 rating shields against dust and rain\u003c\/li\u003e\n  \u003cli\u003eTempered glass lens stays clear and resists wear\u003c\/li\u003e\n  \u003cli\u003eDesigned for heavy-duty 12V truck electrical systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what fits my truck?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for most semi trucks with mirror-mounted signals; the light ships with a pre-attached stainless steel bracket for secure mounting. These universal 12V units are intended as replacements or upgrades for models such as Kenworth, Peterbilt, and Freightliner, but checking mirror bracket dimensions before purchase is recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes as a 2-piece set for both sides of the vehicle\u003c\/li\u003e\n  \u003cli\u003eUniversal 12V compatibility with many heavy trucks\u003c\/li\u003e\n  \u003cli\u003ePre-mounted stainless steel bracket simplifies fitment\u003c\/li\u003e\n  \u003cli\u003eDesigned to work as mirror turn signals or under-glow markers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or replacement concerns should I know about?\u003c\/h3\u003e\n\u003cp\u003eThese LED units require minimal upkeep compared with filament bulbs, but periodic checks ensure the bracket remains tight and the glass lens free of heavy deposits. If the lens becomes obscured by salt or road film, cleaning with a non-abrasive cleaner restores peak light output; LEDs typically outlast traditional bulbs, so full replacements are infrequent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOccasional lens cleaning maintains brightness\u003c\/li\u003e\n  \u003cli\u003eInspect bracket bolts after heavy use or off-road driving\u003c\/li\u003e\n  \u003cli\u003eLEDs have long service life vs. incandescent bulbs\u003c\/li\u003e\n  \u003cli\u003eIP65 prevents most water-related failures but avoid high-pressure washes directly at seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: truck operators, fleet managers, and DIY mechanics who want a durable, high-visibility mirror turn-signal upgrade that also provides styling flexibility. If you drive a 12V heavy truck (Kenworth, Peterbilt, Freightliner and similar), need a corrosion-resistant mounting solution, and prefer the crisp optics of a glass lens with patented LED patterning, these Partsam watermelon mirror lights are designed for you.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights compatible with my 12V semi truck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—designed for most 12V heavy trucks and common mirror mount setups like Kenworth, Peterbilt, and Freightliner; verify bracket dimensions before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do they resist water and road debris?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They have an IP65 rating and a tempered glass lens, offering strong protection against dust, rain, and everyday road spray.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partsam","offers":[{"title":"Default Title","offer_id":67584883065017,"sku":"B0DS6S94FC","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partsam-glass-watermelon-front-view.jpg?v=1790457580"},{"product_id":"lathsy-led-tail-light-for-ford-f-150-passenger-side-2018-2020-direct-fit-weather-resistant","title":"Lathsy LED Tail Light for Ford F-150 Passenger Side (2018-2020) - Direct-Fit, Weather-Resistant","description":"\u003cp\u003e\u003cstrong\u003eLathsy LED tail light for the passenger side is a direct-fit replacement for 2018, 2019, and 2020 Ford F-150 models, matching OE part KL3Z13404B for plug-and-play installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis LED tail light assembly is built to replace the factory unit on Ford F-150 trucks from model years 2018 through 2020. It’s designed to fit the passenger side and comes with bulb sockets that allow straightforward connection to the original wiring harness. The housing includes weather-resistant seals to keep out moisture and fog, and Lathsy backs the product with a two-year warranty covering shipping damage and nonfunctional units.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tail light fit my Ford F-150 passenger side?\u003c\/h3\u003e\n\u003cp\u003eYes—this Lathsy assembly is engineered as a direct replacement for the passenger side of 2018–2020 Ford F-150 models and corresponds to OE number KL3Z13404B. Confirm compatibility by comparing the OE number or visual shape with your existing unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible model years: 2018, 2019, 2020\u003c\/li\u003e\n  \u003cli\u003eOE reference: KL3Z13404B for cross-checking\u003c\/li\u003e\n  \u003cli\u003eDesigned for passenger-side installation\u003c\/li\u003e\n  \u003cli\u003eForm and mounting points match factory locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is the installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be quick because the assembly uses the original bulb sockets and a plug-and-play electrical connection. No printed instructions are included, so beginners should consult an installation video or have a professional install it to ensure correct alignment and sealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play bulb sockets for direct electrical hookup\u003c\/li\u003e\n  \u003cli\u003eTypically removable with common hand tools (screwdrivers, socket set)\u003c\/li\u003e\n  \u003cli\u003eNo drilling or wiring modifications required in most cases\u003c\/li\u003e\n  \u003cli\u003eRecommended: watch a model-specific install video or use a mechanic\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this tail light hold up in bad weather and over time?\u003c\/h3\u003e\n\u003cp\u003eThe assembly includes improved sealing to protect internal components from water and condensation, lowering the chance of fogging or corrosion in wet conditions. Lathsy supports the product with a two-year warranty that covers defects or damage occurring during shipment and ensures replacement if the light is nonfunctional.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWeather-resistant gasketing to reduce moisture ingress\u003c\/li\u003e\n  \u003cli\u003eDurable housing materials for longer service life\u003c\/li\u003e\n  \u003cli\u003eTwo-year warranty for peace of mind\u003c\/li\u003e\n  \u003cli\u003eInspect seals after installation for optimal protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect from the light’s appearance and performance?\u003c\/h3\u003e\n\u003cp\u003eThe LED-style assembly provides the look and illumination level expected from modern tail lights while matching the original truck styling. Brightness, lens clarity, and fitment are designed to be consistent with factory appearance so the replacement reads as original equipment from a distance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eModern LED styling with clear lens and defined light signatures\u003c\/li\u003e\n  \u003cli\u003eOEM-like fit for a seamless visual match to your F-150\u003c\/li\u003e\n  \u003cli\u003eConsistent brake, turn, and running light functions via direct bulbs\u003c\/li\u003e\n  \u003cli\u003eQuality control tested to meet fit-and-function expectations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Truck owners who need a reliable passenger-side tail light replacement for a 2018–2020 Ford F-150 and want a direct-fit assembly that installs quickly, resists weather intrusion, and is backed by a two-year warranty. Ideal for DIYers comfortable following video instructions or for professional installers seeking an OE-compatible substitute.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace OE part KL3Z13404B?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Lathsy passenger-side tail light is a direct replacement matching OE number KL3Z13404B.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is professional installation required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Not required—it's plug-and-play—but beginners should follow a video or use a pro for best sealing and alignment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lathsy","offers":[{"title":"Default Title","offer_id":67584883982521,"sku":"B0CZ84GF7S","price":290.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lathsy-f150-passenger-side-front-view.jpg?v=1790457642"},{"product_id":"lathsy-led-tail-light-for-ford-f-150-2018-2020-driver-side-direct-fit-oe-replacement-plug-and-play","title":"Lathsy LED Tail Light for Ford F-150 (2018–2020) Driver Side — Direct-Fit OE Replacement, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eLathsy's LED driver-side tail light is a direct-fit replacement for 2018–2020 Ford F-150 models, built to match OE form and function.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Lathsy replacement tail light reproduces the original look and signal performance of your Ford F-150 while using LED technology for clear visibility and reliable operation. Designed to align with OE number KL3Z13405B, the assembly is made to fit without modification and includes a plug-and-play bulb harness for a fast swap. Weather-resistant sealing helps reduce water and fog intrusion, and the unit comes backed by a shipping-damage replacement policy.\u003c\/p\u003e\n\n\u003ch3\u003eWill this Lathsy tail light fit my 2018–2020 Ford F-150?\u003c\/h3\u003e\n\u003cp\u003eYes — the assembly is manufactured to replace the factory driver-side tail light for Ford F-150 model years 2018, 2019, and 2020. It follows the OEM mounting points and electrical connector patterns for a direct replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Ford F-150 (2018, 2019, 2020)\u003c\/li\u003e\n  \u003cli\u003eMatches OE part number KL3Z13405B form and mounting\u003c\/li\u003e\n  \u003cli\u003eDirect plug-and-play bulb harness reduces wiring changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eThe unit is designed for quick replacement and typically installs in minutes with common hand tools. Lathsy includes the bulb plug for a straightforward connection, but no printed instructions are provided.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools (socket set, trim tool) usually sufficient\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play bulb harness included for easy electrical hookup\u003c\/li\u003e\n  \u003cli\u003eProfessional installation or online video guidance recommended if unfamiliar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Lathsy tail light hold up to weather and road conditions?\u003c\/h3\u003e\n\u003cp\u003eThe assembly features enhanced sealing to minimize moisture and fogging inside the lens, helping maintain clarity and signal reliability in wet or cold environments. Robust housing materials resist road debris and seasonal temperature changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGood seal design to prevent water ingress and internal fogging\u003c\/li\u003e\n  \u003cli\u003eDurable exterior housing for impact and weather resistance\u003c\/li\u003e\n  \u003cli\u003eLED performance maintains brightness in varied conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty or return options are available if it arrives damaged or faulty?\u003c\/h3\u003e\n\u003cp\u003eLathsy offers replacement for units damaged during shipping or that fail to work on your vehicle as described. Contact the seller with photos and order information to start a replacement claim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShipping-damage replacements available from the seller\u003c\/li\u003e\n  \u003cli\u003eProvide order details and images to expedite support\u003c\/li\u003e\n  \u003cli\u003eSeller assistance recommended before pursuing aftermarket modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own a 2018, 2019, or 2020 Ford F-150 and need a reliable, direct-fit driver-side tail light that restores factory appearance and function without complex wiring. It's suited for DIY mechanics comfortable with basic installation, professional installers who want an OEM-compatible replacement, and vehicle owners prioritizing weather-resistant performance and straightforward fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this tail light plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Lathsy unit includes a direct plug-in bulb harness designed for straightforward connection to the factory wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit all Ford F-150 trims from 2018–2020?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 2018–2020 Ford F-150 driver-side applications that use OE part KL3Z13405B; confirm compatibility with your vehicle trim and mounting pattern.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lathsy","offers":[{"title":"Default Title","offer_id":67584884080825,"sku":"B0CZ843MVP","price":290.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lathsy-tail-light-driver-side-front-view.jpg?v=1790457643"},{"product_id":"partsam-glass-watermelon-dual-face-led-marker-light-amber-red-post-mount-ip65-sealed-m12-stud","title":"Partsam Glass Watermelon Dual-Face LED Marker Light Amber\/Red — Post-Mount, IP65 Sealed M12 Stud","description":"\u003cp\u003e\u003cstrong\u003ePartsam's glass watermelon dual-face LED marker light is a 12V amber\/red turn signal and marker lamp built with a zinc-alloy bezel and glass lens for clear, two-direction visibility on heavy trucks and trailers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact lamp combines a distinctive glass lens pattern with high-output LEDs to deliver pronounced amber and red signaling from a single post-mount unit. The housing and lens design focus the beam into a crisp starburst effect that improves on-road visibility while the sealed construction helps the light withstand exposure to water, dust, and road debris. It ships ready to bolt on with an M12 stud and a three-wire hookup for simple integration into existing truck wiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this light improve visibility on the road?\u003c\/h3\u003e\n\u003cp\u003eThe combination of a patterned glass lens and high-powered LEDs creates sharper light lines and a broader viewing angle than plain lenses. The double-face design presents amber on the forward-facing side and red toward the rear, making it easy for other drivers to recognize direction and braking signals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom LED array produces a bright starburst beam for increased contrast\u003c\/li\u003e\n  \u003cli\u003eGlass lens refracts light for clearer, well-defined signal lines\u003c\/li\u003e\n  \u003cli\u003eDual-color faces ensure correct color orientation front and rear\u003c\/li\u003e\n  \u003cli\u003eIP65 sealing keeps optics free from fogging and dirt buildup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and electrical hookup?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward: the unit mounts by its M12 bolt and uses a three-wire system to match common truck wiring. Color-coded leads let you select dim marker function or full-intensity stop\/turn operation without extra relays in most 12V systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM12 stud for secure post-mount attachment to bumpers, roofs, or grilles\u003c\/li\u003e\n  \u003cli\u003eThree-wire connection: white = ground, black = dim marker, red = full intensity\u003c\/li\u003e\n  \u003cli\u003eFits standard 12V truck electrical systems (Peterbilt, Freightliner, many semis)\u003c\/li\u003e\n  \u003cli\u003eMounting can be adjusted for 90° or 180° orientation where needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat environments and applications is the lamp suited for?\u003c\/h3\u003e\n\u003cp\u003eThe lamp's zinc-alloy housing and glass lens are built to resist water, sand, and road spray, making it suitable for harsh highway and off-highway conditions. It works as a bumper, roof, grille, tailgate, trailer-rear, or under-cab marker where durability and visibility are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65-rated protection against jets of water and dust intrusion\u003c\/li\u003e\n  \u003cli\u003eDurable zinc-alloy bezel helps prevent corrosion on exposed mounts\u003c\/li\u003e\n  \u003cli\u003eGlass lens resists scratching and preserves light clarity over time\u003c\/li\u003e\n  \u003cli\u003eMulti-use for trucks, trailers, and specialty commercial vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Fleet managers, owner-operators, and truck-upfitters who need a compact, durable signaling lamp with clear dual-direction visibility will find this Partsam solution practical. It’s ideal for vehicles that require a robust marker or turn signal light that integrates easily into 12V systems and withstands demanding road conditions. Choose this unit when you want improved optical performance, reliable sealing, and a simple bolt-on installation for Peterbilt, Freightliner, and other heavy-duty rigs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this lamp compatible with 12V truck electrical systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is designed for 12V systems and fits many trucks including Peterbilt and Freightliner using the three-wire hookup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the light withstand wet and dusty conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit has an IP65-rated sealed housing and zinc-alloy bezel to resist water, dust, and road spray.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partsam","offers":[{"title":"Default Title","offer_id":67584887783609,"sku":"B0FNR8L5Z1","price":190.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partsam-front-view-glass-watermelon-light.jpg?v=1790457699"},{"product_id":"reinko-headlight-assembly-pair-for-toyota-rav4-2009-2012-chrome-housings-oem-fit","title":"Reinko Headlight Assembly Pair for Toyota RAV4 2009–2012, Chrome Housings, OEM-fit","description":"\u003cp\u003e\u003cstrong\u003eReinko chrome headlight assembly pair designed to replace the left and right housings on 2009–2012 Toyota RAV4 models for a direct, gap-free fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Reinko headlight assemblies are a full pair (driver and passenger) built to match original equipment dimensions and restore your RAV4’s front-end appearance and lighting geometry. They arrive without bulbs installed, so you can transfer your existing lamps or choose upgraded bulbs. Each housing is finished in chrome and sealed to resist moisture and dirt, delivering a reliable replacement that reinstates factory alignment and style.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my Toyota RAV4?\u003c\/h3\u003e\n\n\u003cp\u003eThese assemblies are engineered specifically for 2009, 2010, 2011, and 2012 Toyota RAV4 vehicles. They replicate OEM mounting points and overall shape so installation aligns with the factory openings. They are not compatible with earlier RAV4 generations (2006–2008).\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible model years: 2009–2012 Toyota RAV4\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 2006–2008 RAV4 variants\u003c\/li\u003e\n  \u003cli\u003eDirect OEM-style mounting locations for bolt-up replacement\u003c\/li\u003e\n  \u003cli\u003ePair includes both left (driver) and right (passenger) housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and do the headlights include bulbs?\u003c\/h3\u003e\n\n\u003cp\u003eThe package contains one pair of headlight housings: both driver and passenger sides. Bulbs are intentionally excluded so you can reuse your existing bulbs or select aftermarket lamp options. For safe, weather-tight operation, professional installation is recommended.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes: 1 pair of headlight assemblies (left and right)\u003c\/li\u003e\n  \u003cli\u003eBulbs: not included — bulbs must be transferred or purchased separately\u003c\/li\u003e\n  \u003cli\u003eInstallation: designed for a direct replacement but professional fitting advised\u003c\/li\u003e\n  \u003cli\u003eReturns to OE alignment when mounted to factory points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weatherproof are these headlight housings?\u003c\/h3\u003e\n\n\u003cp\u003eReinko housings use a sealed design to minimize water and dust intrusion, which helps maintain clarity and electrical reliability in adverse conditions. The seals and housing materials are built for exposure to rain, snow, and road debris, reducing the likelihood of fogging and corrosion compared with damaged or aged originals.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSealed construction prevents moisture and dirt entry\u003c\/li\u003e\n  \u003cli\u003eWorks in rain, snow, sand, and other harsh environments\u003c\/li\u003e\n  \u003cli\u003eChrome finish resists environmental wear and restores appearance\u003c\/li\u003e\n  \u003cli\u003eHelps avoid common issues like lens fogging and seal failure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation affect alignment and safety?\u003c\/h3\u003e\n\n\u003cp\u003eBecause these headlight assemblies match the original housing geometry, they return the front lighting to factory alignment when mounted correctly. Proper installation ensures beam patterns remain within regulatory aims, preserving visibility and minimizing glare for oncoming traffic. If you’re unsure about aiming or wiring, have an auto technician complete the fitment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOEM-style fit keeps beam aim consistent with factory settings\u003c\/li\u003e\n  \u003cli\u003eCorrect mounting reduces gaps and misalignment at the bumper\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended for aiming and wiring checks\u003c\/li\u003e\n  \u003cli\u003eCompatible with stock headlight bulbs or aftermarket upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a 2009–2012 Toyota RAV4 and need to replace damaged, aged, or clouded headlight housings while keeping a factory look, this Reinko chrome headlight pair is a practical choice. It’s suited to drivers who want a direct-fit replacement that restores appearance and function, DIYers comfortable swapping bulbs and aligning lights, and service technicians seeking parts that match OE dimensions without custom modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included with this Reinko headlight pair?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the assemblies are sold without bulbs so you can reuse existing bulbs or choose new ones.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these on a 2008 RAV4?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — these are made for 2009–2012 RAV4 models and will not fit 2006–2008 versions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Reinko","offers":[{"title":"Default Title","offer_id":67584888406201,"sku":"B0DCW375WP","price":340.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/reinko-front-pair-rav4-headlights.jpg?v=1790457721"},{"product_id":"apsve-headlight-assembly-for-chevy-tahoe-suburban-2007-2014-pair-oe-style-fit-uv-coated-lenses","title":"APSVE Headlight Assembly for Chevy Tahoe\/Suburban 2007-2014 — Pair, OE-style Fit \u0026 UV-Coated Lenses","description":"\u003cp\u003e\u003cstrong\u003eAPSVE headlight assembly replacement pair designed to restore factory-style illumination and fit for 2007–2014 Chevy Tahoe and Suburban models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Tahoe, Suburban, Avalanche, or 2500-series Chevy is showing dim, cloudy, or damaged front lighting, this APSVE direct-replacement headlight pair delivers OE-style alignment and weather protection so you can return to safe, reliable driving without complex modifications. These assemblies match factory dimensions, seal against moisture, and use a durable clear lens to resist UV degradation.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these headlights fit my 2007–2014 Chevy?\u003c\/h3\u003e\n\u003cp\u003eEach headlight is engineered to the original equipment measurements so installation follows the same mounting points and wiring routes as the factory units. They are intended to be plug-and-play with no body trimming required when used with existing bulb hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement for specified model years and trim levels\u003c\/li\u003e\n  \u003cli\u003eCompatible with Chevy Tahoe (2007–2014), Suburban 1500 (2007–2014), Suburban 2500 (2007–2013), Avalanche (2007–2013)\u003c\/li\u003e\n  \u003cli\u003eReplaces GM reference numbers GM2503263, GM2502263, 22853025, 22853026\u003c\/li\u003e\n  \u003cli\u003eUses factory mounting points and original wiring harness locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat lighting performance and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are built to match OE lighting geometry, helping maintain proper beam pattern and alignment. The clear polycarbonate lens has a UV-resistant coating to slow yellowing and clouding from sun exposure, and the housing includes weather seals to keep contaminants out.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-style optical alignment for consistent beam pattern\u003c\/li\u003e\n  \u003cli\u003eUV-coated clear lens to resist discoloration over time\u003c\/li\u003e\n  \u003cli\u003eSealed housing with waterproof silicone to prevent moisture intrusion\u003c\/li\u003e\n  \u003cli\u003eDurable construction for road and seasonal exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these headlights include bulbs and how is installation handled?\u003c\/h3\u003e\n\u003cp\u003eThe APSVE set ships as a complete left-and-right headlight assembly pair but does not include bulbs, so existing bulbs are typically reused or upgraded separately. The assemblies are designed for straightforward replacement; professional installation is recommended if you are not comfortable with headlight removal and aiming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes both driver and passenger side assemblies\u003c\/li\u003e\n  \u003cli\u003eBulbs not included—reuse original bulbs or install aftermarket replacements\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play wiring; no vehicle modifications expected\u003c\/li\u003e\n  \u003cli\u003eProfessional installation advised for correct aiming and seal integrity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers restoring appearance and function to mid-2000s Chevrolets who want a direct-fit headlight pair with OE-style beam performance and improved lens durability. Ideal for owners replacing cracked, fogged, or otherwise failing factory headlights on Tahoe, Suburban, Avalanche, and 2500 models who prefer a sealed, weather-resistant assembly that aligns with original mounting and reference numbers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included with the APSVE headlight assemblies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, bulbs are not included. You can reuse your original bulbs or install aftermarket bulbs that match the factory socket types.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these headlights fit my 2012 Chevy Suburban 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, these assemblies are compatible with 2007–2014 Suburban 1500 models and are designed as direct replacements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"APSVE","offers":[{"title":"Default Title","offer_id":67584888242361,"sku":"B09Y5CPNJQ","price":261.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/apsve-headlight-front-assembly-pair.jpg?v=1790457719"},{"product_id":"reinko-headlight-assembly-pair-for-2006-2008-toyota-rav4-direct-fit-sealed-housings","title":"Reinko Headlight Assembly Pair for 2006–2008 Toyota RAV4 — Direct-Fit Sealed Housings","description":"\u003cp\u003e\u003cstrong\u003eReinko replacement headlight assembly pair for 2006–2008 Toyota RAV4 delivers a direct-fit, sealed housing for both driver and passenger sides.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese headlights are engineered as direct replacements for pre-facelift Toyota RAV4 models from 2006, 2007 and 2008. They match the original equipment housings so installation aligns with factory mounting points and trim, and the sealed construction helps keep out moisture and debris. Bulbs are not included, allowing you to reuse OEM bulbs or choose upgraded lighting separately.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these headlights fit my 2006–2008 RAV4?\u003c\/h3\u003e\n\n\u003cp\u003eThey are manufactured to the same form and mounting specifications as the original factory units for pre-facelift RAV4s. That means bolt locations, electrical connector positions and overall dimensions match the OE housings for a straightforward swap. Professional installation is recommended to ensure proper alignment and sealing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible models: 2006, 2007, 2008 Toyota RAV4 (pre-facelift)\u003c\/li\u003e\n  \u003cli\u003eIncludes both left (driver) and right (passenger) headlight assemblies\u003c\/li\u003e\n  \u003cli\u003eDirect OEM-style fit to avoid gaps and misalignment\u003c\/li\u003e\n  \u003cli\u003eBulbs not included — accepts original or aftermarket bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these headlights resist water and road debris?\u003c\/h3\u003e\n\n\u003cp\u003eThe housings use a sealed design intended to keep moisture, dust and road grit out of the lamp cavity. Properly sealed assemblies reduce fogging and protect internal components, which helps maintain consistent light output in wet or dusty conditions. Make sure mounting surfaces are clean and hardware is tightened to preserve the seal.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWaterproof construction to prevent ingress during rain or snow\u003c\/li\u003e\n  \u003cli\u003eSealed perimeter to reduce internal condensation\u003c\/li\u003e\n  \u003cli\u003eDurable materials suitable for typical road conditions\u003c\/li\u003e\n  \u003cli\u003eCheck seals after installation for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what will I need?\u003c\/h3\u003e\n\n\u0026gt;The package contains one pair of headlight assemblies — both driver and passenger sides — without bulbs. You will need the appropriate bulbs (halogen or your chosen aftermarket upgrade), basic hand tools, and possibly trim clips for a clean installation. If you aren’t comfortable with vehicle electrical work, a professional installer can handle mounting and aiming to meet local regulations.\n\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 pair of headlight assemblies (left and right)\u003c\/li\u003e\n  \u003cli\u003eNot included: bulbs, wiring adapters, or mounting bolts in some cases\u003c\/li\u003e\n  \u003cli\u003eRecommended: gloves, screwdrivers, socket set, and alignment tools\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended for precise aiming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these headlights compatible with facelift RAV4s or other years?\u003c\/h3\u003e\n\n\u003cp\u003eThese assemblies are designed specifically for the pre-facelift Toyota RAV4 models from 2006–2008 and are not compatible with RAV4 facelift models from 2009–2011. They are tailored to the earlier body styling and mounting layout, so attempting to fit non-matching years will likely require modification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2006, 2007, 2008 pre-facelift RAV4\u003c\/li\u003e\n  \u003cli\u003eNot compatible: 2009–2011 RAV4 facelift models\u003c\/li\u003e\n  \u003cli\u003eVerify your vehicle year and front-end design before ordering\u003c\/li\u003e\n  \u003cli\u003eContact customer support with VIN for fitment confirmation if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This headlight pair is ideal for owners of 2006–2008 Toyota RAV4s who need a reliable, OE-style replacement for scratched, cracked or fogged housings. It suits DIY mechanics replacing damaged lights and professional shops offering retrofit or restoration services. If you drive a pre-facelift RAV4 and want a sealed, direct-fit option that accepts your choice of bulbs, these Reinko assemblies are intended for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included with these headlights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the pair is sold without bulbs so you can reuse existing bulbs or choose aftermarket options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit a 2009 RAV4?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — these are only compatible with 2006–2008 pre-facelift RAV4 models, not 2009–2011 facelift versions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Reinko","offers":[{"title":"Default Title","offer_id":67584888275129,"sku":"B0CR17MFVB","price":269.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/reinko-headlights-front-packaging.jpg?v=1790457722"},{"product_id":"karsparehub-headlights-for-2012-2015-toyota-tacoma-halogen-complete-assemblies-with-bulbs-oem-fit-weatherproof","title":"KarSpareHub headlights for 2012-2015 Toyota Tacoma halogen — complete assemblies with bulbs, OEM-fit, weatherproof","description":"\u003cstrong\u003eKarSpareHub headlights with bulbs replace your 2012–2015 Toyota Tacoma halogen assemblies with OEM-fit, weatherproof units designed for direct, bolt-in installation.\u003c\/strong\u003e\n\n\u003cp\u003eThese complete headlight assemblies are built to match the original Toyota Tacoma 2012–2015 halogen configuration (OEM# 8111004181, 8115004181; Partslink TO2502213, TO2503213). Each unit ships with both high- and low-beam bulbs installed and uses durable materials and coatings to resist yellowing, moisture, and everyday road stresses. The assemblies are tested for exact fitment and sealed to maintain internal stability through temperature and humidity changes.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these headlights fit my 2012–2015 Toyota Tacoma?\u003c\/h3\u003e\n\u003cp\u003eThey are modeled precisely to the factory specifications for halogen headlight models of the 2012–2015 Tacoma. The housings, mounting points, and connectors align with the original parts for a bolt-in replacement that avoids modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OEM part numbers included for cross-reference: 8111004181, 8115004181\u003c\/li\u003e\n  \u003cli\u003ePartslink compatibility: TO2502213 and TO2503213\u003c\/li\u003e\n  \u003cli\u003eDesigned for halogen-equipped Tacoma models only\u003c\/li\u003e\n  \u003cli\u003ePlugs into factory wiring harness with standard connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protects these headlights from moisture and yellowing?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies are sealed with a PUR adhesive and pass a full air-tightness inspection to prevent water ingress. An internal one-way breathable film balances pressure and humidity while a UV optical coating on the lens resists discoloration and aging caused by sun exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePUR adhesive bead provides long-term waterproof sealing\u003c\/li\u003e\n  \u003cli\u003e100% air-tightness testing for production units\u003c\/li\u003e\n  \u003cli\u003eOne-way breathable film reduces condensation risk\u003c\/li\u003e\n  \u003cli\u003eUV optical lens coating slows yellowing and retains clarity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I get enough light and are bulbs included?\u003c\/h3\u003e\n\u003cp\u003eYes. These assemblies include the appropriate high- and low-beam halogen bulbs and are engineered to meet SAE brightness standards for safe nighttime visibility. The reflector and lens optics are tuned to provide a stable, focused beam similar to factory performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBoth H\/L beam bulbs included in each assembly\u003c\/li\u003e\n  \u003cli\u003eReflector and lens set for regulated beam pattern\u003c\/li\u003e\n  \u003cli\u003eOptical design targets effective road illumination without scatter\u003c\/li\u003e\n  \u003cli\u003eMeets SAE regulatory requirements for halogen headlamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what warranty comes with it?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for DIYers or professional installers—no major vehicle modifications are required. KarSpareHub includes a 3-year limited coverage for defects under normal use; simply provide order details and photos for a replacement or refund as outlined on the warranty card.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt-in replacement for halogen Tacoma headlight models\u003c\/li\u003e\n  \u003cli\u003eTypical installation requires basic hand tools and under-hood access\u003c\/li\u003e\n  \u003cli\u003eReply \"DIY\" to request step-by-step installation guidance\u003c\/li\u003e\n  \u003cli\u003e3-year coverage for manufacturing defects with simple claim process\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These KarSpareHub assemblies are ideal for owners of Toyota Tacoma 2012–2015 models that use halogen headlights and need a reliable, OEM-compatible replacement without modification. Choose these lights if you want factory-style fitment, stronger protection against moisture and UV degradation, included bulbs for immediate use, and a straightforward warranty backed by documentation. If your Tacoma originally shipped with HID or LED factory headlights, this halogen-specific assembly is not compatible—confirm your vehicle’s headlight type before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these headlights compatible with my 2013 Toyota Tacoma?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these are made for 2012–2015 Toyota Tacoma halogen models; confirm your truck uses halogen headlights.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the headlights come with bulbs and a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—high and low beam bulbs are included and a 3-year warranty covers defects under normal use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KarSpareHub","offers":[{"title":"Default Title","offer_id":67584888307897,"sku":"B0D9GRGBZF","price":403.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/karsparehub-front-assembly-toyota-tacoma-2012-2015.jpg?v=1790457721"},{"product_id":"dna-motoring-headlight-assembly-for-2005-2007-ford-f250-f350-f450-f550-super-duty-chrome-clear-pair-direct-fit-oe-replacement","title":"DNA MOTORING Headlight Assembly for 2005-2007 Ford F250\/F350\/F450\/F550 Super Duty — Chrome\/Clear Pair, Direct-Fit OE Replacement","description":"\u003cstrong\u003eComplete chrome\/clear headlight assemblies designed to replace the original units on 2005–2007 Ford F250, F350, F450 and F550 Super Duty trucks.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Super Duty's front lighting is faded, cracked, or simply outdated, these DNA MOTORING headlamp assemblies provide a direct-fit replacement built for long service life. Manufactured with durable ABS housing and clear polycarbonate lenses, the assemblies match OE mounting points and electrical connectors for straightforward installation without modifications. They come as a pair—driver and passenger side—so you can refresh both sides at once for consistent appearance and performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow simple is the installation on a 2005–2007 Super Duty?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be plug-and-play: no cutting, splicing, or custom brackets required. The assemblies align to factory bolt locations and use the same connector types as the original parts, making them suitable for a DIY swap or a quick shop install.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-on OE fitment for 2005–2007 F250\/F350\/F450\/F550 SD models\u003c\/li\u003e\n  \u003cli\u003eUses factory-style electrical connectors for hassle-free hookup\u003c\/li\u003e\n  \u003cli\u003eComes as a complete set: driver and passenger included\u003c\/li\u003e\n  \u003cli\u003eTypical installation time: about 30–60 minutes per side for a competent DIYer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and quality features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThese headlamps combine impact-resistant polycarbonate lenses with an ABS plastic housing to resist road debris and weather exposure. The chrome\/clear finish provides a factory-like look while helping reflect and direct light efficiently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClear polycarbonate lens resists yellowing and cracking\u003c\/li\u003e\n  \u003cli\u003eRugged ABS housing built for corrosion and impact resistance\u003c\/li\u003e\n  \u003cli\u003eChrome interior finish for consistent light reflection and appearance\u003c\/li\u003e\n  \u003cli\u003eManufactured to match original mounting and reference numbers for fit verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich part numbers and model references do these replace?\u003c\/h3\u003e\n\u003cp\u003eDNA MOTORING lists multiple reference numbers to help you confirm compatibility with your truck. Use these OE-style references to cross-check against your current headlamp or parts manual before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits reference numbers: 6C3Z13008AB, 6C3Z13008BB, 6C3Z13008CB, 6C3Z13008D\u003c\/li\u003e\n  \u003cli\u003eAlso corresponds to FO2503217, FO2502217, FO2503224, FO2502224\u003c\/li\u003e\n  \u003cli\u003eCompatible specifically with 2005–2007 Ford F250 \/ F350 \/ F450 \/ F550 Super Duty\u003c\/li\u003e\n  \u003cli\u003eIncludes both driver and passenger assemblies for full replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These DNA MOTORING chrome\/clear headlight assemblies are intended for owners of 2005–2007 Ford Super Duty trucks who want a reliable, direct-replacement solution to restore front-end appearance and performance. They're a practical choice for truck owners replacing aged, discolored, or damaged lamps; for restorers aiming to maintain an OEM look; or for vehicle enthusiasts preparing a truck for show where clean, matching optics matter. If you need a plug-and-play headlamp pair with OE-style fitment and durable materials, this set is built for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these headlights fit my 2006 Ford F350 Super Duty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these assemblies are compatible with 2005–2007 Ford F250, F350, F450, and F550 Super Duty trucks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the headlights come with bulbs installed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The listing includes the driver and passenger housings; verify whether bulbs are preinstalled or supplied by the seller before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DNA MOTORING","offers":[{"title":"Default Title","offer_id":67584889782457,"sku":"B07D4Z5Y6B","price":259.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dna-motoring-front-assembly-pair_2c845d24-ea1b-4ff1-abc2-f034f9bd5748.jpg?v=1790457808"},{"product_id":"xprite-led-tail-lights-for-jeep-wrangler-jk-2007-2018-smoked-4d-lens-osram-leds","title":"Xprite LED Tail Lights for Jeep Wrangler JK (2007–2018) — Smoked 4D Lens, OSRAM LEDs","description":"\u003cp\u003e\u003cstrong\u003eXprite 4D smoked LED tail lights transform the rear of a 2007–2018 Jeep Wrangler JK with brighter, faster-responding LEDs and a modern smoked 4D lens.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese plug-and-play taillights replace the factory units on U.S. spec Jeep Wrangler JK 2- and 4-door models (2007–2018) and combine a smoked PMMA lens, black ABS housing, and high-efficiency OSRAM chips to deliver increased visibility and a contemporary look. DOT-approved and designed for simple installation, they offer running lights, brake\/turn signals, and reverse illumination without the need for extra resistors.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes the Xprite 4D smoked LEDs better than stock tail lights?\u003c\/h3\u003e\n\u003cp\u003eThe Xprite lights use high-performance OSRAM LED chips that provide brighter output with lower power draw and a faster on\/off response than incandescent bulbs. The durable materials resist weathering while the smoked 4D lens adds a refined appearance without sacrificing function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOSRAM LED chips for longer life and improved lumens\u003c\/li\u003e\n  \u003cli\u003eOver 50,000-hour estimated lifespan\u003c\/li\u003e\n  \u003cli\u003eSmoked PMMA lens with black ABS housing for a premium finish\u003c\/li\u003e\n  \u003cli\u003eDOT-approved for lawful road use in U.S. markets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and will I need extra parts?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward and typically takes 15 minutes or less per side for someone comfortable with basic vehicle tasks. These tail lights are plug-and-play for U.S. Jeep JK models with the female factory harness and include built-in resistors, eliminating the need for separate load resistors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play wiring—no splicing required\u003c\/li\u003e\n  \u003cli\u003eBuilt-in resistor prevents hyperflashing or error codes on compatible vehicles\u003c\/li\u003e\n  \u003cli\u003eWorks with factory male connector on U.S. models only\u003c\/li\u003e\n  \u003cli\u003eNot compatible with European-spec Jeeps (different plug type)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich light functions are included and how do they perform?\u003c\/h3\u003e\n\u003cp\u003eEach Xprite 4D tail light delivers three primary functions: daytime running lights (DRL), brake\/turn signal, and reverse light. The LED design switches faster than incandescent bulbs, improving signaling clarity, while the DRL adds a distinctive, modern look to the vehicle’s rear profile.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDaytime running lights for increased daytime visibility\u003c\/li\u003e\n  \u003cli\u003eBrake\/turn signal with rapid response timing\u003c\/li\u003e\n  \u003cli\u003eIntegrated reverse light for clearer rear illumination\u003c\/li\u003e\n  \u003cli\u003eSmoked lens keeps a sleek appearance without blocking function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Xprite 4D smoked LED tail lights are intended for Jeep Wrangler JK owners (2007–2018 U.S. models, 2- or 4-door) who want a durable, higher-performing replacement with a modern smoked aesthetic. They suit drivers looking for a straightforward upgrade that enhances visibility and style without complicated wiring or extra components. If you have a European-spec Wrangler or a non-compatible connector, these will not fit without adapter modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these Xprite tail lights plug-and-play for my 2015 Jeep Wrangler JK?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they’re plug-and-play for 2007–2018 U.S. JK models with the factory male connector; installation usually takes 15 minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra resistors or modules to prevent hyperflashing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No extra resistors are required; the lights include built-in resistors to prevent hyperflashing on compatible U.S. models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Xprite","offers":[{"title":"Default Title","offer_id":67584890241209,"sku":"B07VYJHCG1","price":221.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/xprite-4d-smoked-tail-left-side-front-view.jpg?v=1790457828"},{"product_id":"roadeal-headlight-assemblies-for-1999-2007-gmc-sierra-1500-2500-3500-direct-fit-ip65-waterproof","title":"ROADEAL Headlight Assemblies for 1999-2007 GMC Sierra 1500\/2500\/3500 - Direct Fit, IP65 Waterproof","description":"\u003cb\u003eROADEAL replacement headlight assemblies engineered to be a direct, plug-and-play fit for select 1999–2007 GMC Sierra and compatible Yukon XL models.\u003c\/b\u003e\n\n\u003cp\u003eUpgrade worn or fogged factory headlights with a set designed to match original equipment dimensions while improving light transmission and weather resistance. These ROADEAL assemblies correspond to OEM# 15850351 \/ 15850352 and Partslink# GM2502188 \/ GM2503188, fitting 1999–2006 GMC Sierra 1500\/2500\/3500, 2007 GMC Sierra classic 1500\/2500\/3500, and 2000–2006 GMC Yukon 1500\/2500 XL. They are not compatible with 1999 Sierra Old Body Style, 2007 Sierra New Body Style, or GMC Yukon Denali models.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lights physically fit my GMC Sierra?\u003c\/h3\u003e\n\u003cp\u003eYes — the housings are manufactured to the same mounting points and electrical connector layout as the original assemblies, making them a direct replacement. No modifications, drilling, or custom brackets are required for compatible models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact OEM reference numbers included for verification.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connector design for simple swap-out.\u003c\/li\u003e\n  \u003cli\u003eIntended for specific year ranges and body styles only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow bright and durable are the lenses and reflectors?\u003c\/h3\u003e\n\u003cp\u003eROADEAL uses high-transmittance polycarbonate lenses with UV coating to reduce yellowing and preserve clarity over time. The BMC reflectors tolerate high temperatures (up to about 570°F) and provide stronger light reflection, yielding noticeable brightness gains compared with common reflector materials.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePC lens with UV protection for long-term clarity.\u003c\/li\u003e\n  \u003cli\u003eBMC reflector rated for high heat and higher reflection.\u003c\/li\u003e\n  \u003cli\u003eApproximately 20% increased brightness versus standard alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these headlights weatherproof and ready for winter use?\u003c\/h3\u003e\n\u003cp\u003eThey meet an IP65 waterproof standard and use sealing methods that limit moisture and dust intrusion, so they perform reliably in rain, snow, and road spray situations. The build helps reduce internal fogging and keeps electrical components protected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65-rated sealing against water jets and dust ingress.\u003c\/li\u003e\n  \u003cli\u003eEngineered joints and gaskets to discourage condensation.\u003c\/li\u003e\n  \u003cli\u003eSuitable for seasonal driving and varied climates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat bulbs come with the assembly and which are not included?\u003c\/h3\u003e\n\u003cp\u003eLow and high beams are provided using HB4 (9006) for low beam and HB3 (9005) for high beam, so your lighting is ready on arrival. Turn signal bulbs (3157A) are not included and should be sourced separately if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: HB4 9006 (low) and HB3 9005 (high).\u003c\/li\u003e\n  \u003cli\u003eNot included: 3157A turn-signal bulbs.\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct bulb replacement without rewiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These ROADEAL headlight assemblies are ideal for owners of compatible GMC Sierra and Yukon XL trucks who want an OEM-size replacement that restores clarity and improves performance without complex installation. Choose these if you need corrosion-resistant reflectors, UV-protected lenses, plug-and-play fitment, and a robust seal for all-season driving. ROADEAL backs the product with a three-year warranty and customer support to assist with fitment or concerns.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights require any modifications to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modifications are needed for compatible models; they use plug-and-play connectors and factory mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are turn signal bulbs included with the assemblies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, HB3\/HB4 low\/high bulbs are included, but 3157A turn-signal bulbs are not supplied.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ROADEAL","offers":[{"title":"Default Title","offer_id":67584890273977,"sku":"B0F8MR9CQV","price":209.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/roadeal-headlight-front-assembly.jpg?v=1790457831"},{"product_id":"apsve-headlight-assemblies-for-2007-2013-chevy-silverado-1500-bulbs-wiring-plug-and-play-sealed-housings","title":"APSVE Headlight Assemblies for 2007–2013 Chevy Silverado 1500 — Bulbs \u0026 Wiring, Plug-and-Play Sealed Housings","description":"\u003cp\u003e\u003cstrong\u003eAPSVE replacement headlight assemblies with bulbs and wiring provide a complete, plug-and-play solution to restore clear, reliable front lighting on 2007–2013 Chevy Silverado 1500 trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Silverado’s factory headlights are cracked, fogged, or underperforming, this all-in-one kit from APSVE replaces both lamp housings, includes bulbs and dedicated wiring harnesses, and installs without cutting or splicing. The assemblies are engineered as direct OE-style replacements to match the vehicle’s original fitment for model years 2007 through 2013 (and compatible with many 2007–2014 Silverado 2500\/3500 and HD models). Built with sealed housings and one-way vents, the kit helps reduce moisture buildup while meeting DOT and SAE guidelines for highway use.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my Chevy Silverado 1500?\u003c\/h3\u003e\n\u003cp\u003eThese APSVE assemblies are designed to fit 2007–2013 Chevrolet Silverado 1500 models and many 2007–2014 Silverado 2500\/3500 HD trucks. They are OE-style replacements intended for vehicles that originally used the same headlight configuration. Note: they are not compatible with the 2007 Silverado Classic—verify your truck’s year and original headlamp style before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment covers 2007–2013 Silverado 1500 and many 2007–2014 2500\/3500 HD models.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 2007 Silverado Classic—check original headlight shape and mounting points.\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-in design keeps factory alignment and mounting intact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the APSVE headlight kit and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes two headlight assemblies, two bulbs, and a pair of wiring harnesses so you receive everything required to install the lights right away. Designed for plug-and-play installation, the assemblies use OE-style connectors and mounting points, minimizing tools and modification. Most users can complete the swap with basic hand tools in a garage or driveway.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete package: both lamp housings, bulbs, and wiring harnesses included.\u003c\/li\u003e\n  \u003cli\u003eOE-style plugs and brackets for straightforward bolt-in replacement.\u003c\/li\u003e\n  \u003cli\u003eInstallation typically requires only basic tools and followable wiring connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these replacement lights perform and protect against moisture?\u003c\/h3\u003e\n\u003cp\u003eAPSVE assemblies are built with fully sealed housings and silicone seals around the lens and body to help prevent water intrusion. One-way vents balance pressure without letting moisture build up, helping maintain clarity and consistent beam pattern. The included bulbs restore forward lighting brightness comparable to new factory units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone sealing and one-way vents reduce condensation and water ingress.\u003c\/li\u003e\n  \u003cli\u003eBulbs included to restore lumen output without separate purchases.\u003c\/li\u003e\n  \u003cli\u003eDOT and SAE compliance for safe on-road illumination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? APSVE’s headlight assembly kit is intended for Silverado owners who need a full replacement rather than a single-bulb fix—drivers with cracked, yellowed, or leaking headlamp housings, or anyone upgrading to a ready-to-install set with wiring included. It’s a practical choice for DIY mechanics, fleet maintenance, or anyone who values a complete, factory-style swap without hunting down separate bulbs or harnesses.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included with the APSVE headlight assemblies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — each kit includes both bulbs, so you receive complete lamp units ready for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to modify wiring to install these headlights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the kit includes dedicated wiring harnesses and OE-style connectors for a plug-and-play swap.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"APSVE","offers":[{"title":"Default Title","offer_id":67584892305593,"sku":"B09TZYWK45","price":325.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/apsve-front-packaging-headlights-silverado.jpg?v=1790457936"},{"product_id":"oksiwa-led-fog-lights-for-chevy-silverado-1500-2016-2018-plug-and-play-set-ip67-weatherproof","title":"OKSIWA LED Fog Lights for Chevy Silverado 1500 (2016–2018) Plug-and-Play Set, IP67 Weatherproof","description":"\u003cp\u003e\u003cstrong\u003eThese OKSIWA LED fog lights are a plug-and-play replacement made to increase low-visibility illumination and fit factory mounts on 2016–2018 Chevy Silverado 1500 trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you drive a 2016, 2017 or 2018 Silverado 1500 and need brighter, more focused fog lighting without complicated wiring, this complete OKSIWA set is built to be a direct swap for the OE fog lights. They pair high-output LEDs with an engineered optical lens and a rugged aluminum housing to deliver clear, low-scatter light while resisting harsh weather and road debris.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these fog lights improve night and fog visibility?\u003c\/h3\u003e\n\u003cp\u003eThe high-performance LED chips and optical design produce a concentrated, consistent beam that cuts through fog and reduces backscatter compared with diffuse halogen lamps. That cleaner beam helps you see road edges and reflectors sooner, while minimizing glare for oncoming drivers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-output LED chips for brighter lumen output than typical halogens\u003c\/li\u003e\n\u003cli\u003eOptical lens focuses light to limit scatter and glare\u003c\/li\u003e\n\u003cli\u003eEven beam pattern reveals road contours and markers more clearly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights durable for all weather and road conditions?\u003c\/h3\u003e\n\u003cp\u003eYes — the lamps use a corrosion-resistant, die-cast aluminum housing and a heat-management system to withstand temperature cycles and impacts. An IP67 waterproof rating protects internal electronics from rain, dust, and splashes, making them suitable for wet winter driving and muddy off-road use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIP67-rated sealing for reliable wet-weather performance\u003c\/li\u003e\n\u003cli\u003eAluminum alloy body resists rust and physical damage\u003c\/li\u003e\n\u003cli\u003eIntegrated heat dissipation extends LED lifespan\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation on a 2016–2018 Silverado 1500?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be fast and tool-light: the OKSIWA set plugs into the existing fog light wiring and mounts into the stock housing locations, typically taking about 15 minutes per side. No cutting, splicing, or drilling is required—if a lamp fails to power immediately, reversing the plug orientation often resolves polarity-sensitive connections.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlug-and-play connectors match factory wiring—no modifications\u003c\/li\u003e\n\u003cli\u003eMounts to original fog light brackets and locations\u003c\/li\u003e\n\u003cli\u003eQuick polarity check: rotate plug 180° if it does not light\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my truck exactly and what should I confirm before buying?\u003c\/h3\u003e\n\u003cp\u003eThey are manufactured specifically for the 2016–2018 Chevy Silverado 1500 fog light openings, but it's important to verify your truck’s model year and OEM fog light style before ordering. Confirm compatibility to ensure the plugs, brackets, and bezel clearances match your vehicle’s factory setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle fitment: 2016, 2017, 2018 Chevy Silverado 1500 — verify before purchase\u003c\/li\u003e\n\u003cli\u003ePlease check existing fog light connector and bezel style for exact fit\u003c\/li\u003e\n\u003cli\u003eContact support if you have a nonstandard bumper or dealer-installed options\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The OKSIWA LED fog lights suit Silverado 1500 owners who want an easy, OEM-style lighting upgrade for improved low-visibility driving without the hassle of custom wiring. They are ideal for commuters, weekend drivers, and light off-road enthusiasts seeking a durable, weatherproof fog light with a focused beam and long service life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these OKSIWA fog lights require cutting or splicing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They are plug-and-play and designed to use your Silverado’s existing fog light connectors and mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these fog lights waterproof for winter use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They carry an IP67 rating to resist water, dust, and mud in winter conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OKSIWA","offers":[{"title":"Default Title","offer_id":67584893386937,"sku":"B0DXKW9SXG","price":179.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/oksiwa-front-view-fog-light-assembly.jpg?v=1790457976"},{"product_id":"nilight-headlight-assembly-for-1999-2004-ford-super-duty-f250-f550-chrome-housing-clear-lens-4-pack-direct-fit-dot","title":"Nilight Headlight Assembly for 1999-2004 Ford Super Duty F250-F550, Chrome Housing Clear Lens 4-Pack, Direct-Fit DOT","description":"\u003cstrong\u003eNilight replacement headlight assemblies for 1999–2004 Ford Super Duty trucks provide a direct-fit, waterproof, DOT-compliant upgrade in a 4-pack with chrome housing and clear lenses.\u003c\/strong\u003e\n\nThese four headlight units are built to fit 1999–2004 Ford F250, F350, F450 and F550 Super Duty models without modification. Constructed from impact-resistant ABS with sealed housings, the assemblies aim to resist dust, water and corrosion while delivering the factory-style appearance of chrome housings and clear corner lenses. They ship as a bolt-on set so you can replace worn or damaged headlights quickly and maintain original alignment and mounting points.\n\n\u003ch3\u003eWill these headlights fit my 1999–2004 Ford Super Duty?\u003c\/h3\u003e\n\u003cp\u003eYes — these Nilight assemblies are designed specifically for 1999, 2000, 2001, 2002, 2003 and 2004 F250, F350, F450 and F550 Super Duty trucks. They match original mounting locations and connector types to avoid trimming or wiring changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGuaranteed compatibility with listed model years and trims\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on replacement; no body modification required\u003c\/li\u003e\n  \u003cli\u003eIncludes headlight units for both driver and passenger sides in a 4-pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these headlight assemblies in bad weather?\u003c\/h3\u003e\n\u003cp\u003eThe housings are made from fully sealed ABS plastic and meet an IP65 waterproof rating, which helps keep moisture and road debris out of the internal components. That construction is intended to reduce fogging and corrosion over time, keeping the lenses clearer and electrical parts protected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65 rated sealing against water jets and dust ingress\u003c\/li\u003e\n  \u003cli\u003eABS plastic housing for tensile and impact resistance\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials for longer service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and do they meet safety standards?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward: the bolt-on design lines up with factory mounting points so no drilling or cutting is necessary. Nilight also states these assemblies comply with DOT and SAE regulations, which helps ensure they meet common road-safety and beam-pattern expectations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple bolt-on installation with original mounting points\u003c\/li\u003e\n  \u003cli\u003eNo extra gaps or fitment issues expected when installed correctly\u003c\/li\u003e\n  \u003cli\u003eDOT \u0026amp; SAE compliant for regulatory alignment with road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or lifespan can I expect from these lights?\u003c\/h3\u003e\n\u003cp\u003eNilight inspects components during production to improve longevity; however, lifetime depends on usage, road conditions and care. Keeping lenses clean and checking seals periodically will help maintain brightness and prevent premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuality-controlled components to reduce early failures\u003c\/li\u003e\n  \u003cli\u003ePeriodic cleaning of lenses recommended to preserve output\u003c\/li\u003e\n  \u003cli\u003eInspect seals after off-road or heavy weather exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for? These headlight assemblies are aimed at owners of 1999–2004 Ford Super Duty trucks who need a full-set replacement that restores factory fit and appearance without customization. They suit do-it-yourself mechanics replacing damaged or fogged lights, fleet managers keeping older trucks roadworthy, and anyone seeking an economical, DOT-compliant headlight refresh with durable, sealed construction.\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these Nilight headlights require wiring changes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, they are bolt-on replacements designed to match existing connectors and mounting points without rewiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these headlights weatherproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they use sealed ABS housings rated IP65 to resist water, dust, and corrosion in normal conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Nilight","offers":[{"title":"Default Title","offer_id":67584894042297,"sku":"B092W3Q7CL","price":276.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/nilight-headlight-assembly-front-packaging.jpg?v=1790457997"},{"product_id":"nilight-headlight-assembly-for-1999-2004-ford-super-duty-chrome-housing-amber-corner-clear-lens-direct-fit-pair","title":"Nilight Headlight Assembly for 1999–2004 Ford Super Duty — Chrome Housing Amber Corner Clear Lens, Direct-Fit Pair","description":"\u003cp\u003e\u003cstrong\u003eHigh-quality, DOT-compliant headlight assemblies that replace the original 1999–2004 Ford Super Duty (F250, F350, F450, F550) units with chrome housing, amber corner, and clear lens for both driver and passenger sides.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Nilight headlight assembly set is engineered to match factory fit and appearance for 1999–2004 Ford Super Duty trucks. Built from sealed ABS plastic and designed as bolt-on replacements, these headlights aim to restore original illumination and curb appeal without cutting or modifying the vehicle. They meet DOT and SAE requirements and include features meant to resist water, dust, and corrosion for everyday use.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my 1999–2004 Ford Super Duty?\u003c\/h3\u003e\n\u003cp\u003eYes—these assemblies are manufactured to fit 1999, 2000, 2001, 2002, 2003, and 2004 model-year F250, F350, F450, and F550 trucks. They follow the factory mounting points so installation aligns with the original locations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for listed model years and trims\u003c\/li\u003e\n  \u003cli\u003eDriver and passenger side included in the set\u003c\/li\u003e\n  \u003cli\u003eNo body or wiring modifications required for standard installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies are bolt-on replacements designed for a straightforward swap using common hand tools. Most installations take under an hour per side for someone with basic automotive experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses factory screw and bolt locations—no drilling\u003c\/li\u003e\n  \u003cli\u003eStandard tools like socket set and screwdrivers recommended\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle service manual for access and alignment steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant are these Nilight headlights?\u003c\/h3\u003e\n\u003cp\u003eConstructed from reinforced ABS plastic and fully sealed, these headlights are rated IP65 for water and dust resistance. The sealed build helps protect internal components from moisture and road debris to extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFully sealed housings to prevent water ingress\u003c\/li\u003e\n  \u003cli\u003eImpact-resistant ABS material for toughness\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finishes for long-term appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these headlights safe and street-legal?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are manufactured to meet DOT and SAE standards to ensure compatibility with road-legal requirements. They are intended to provide appropriate beam patterns and signaling for safe operation on public roads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDOT \u0026amp; SAE compliant for highway use\u003c\/li\u003e\n  \u003cli\u003eIncludes amber corner for clear turn signaling\u003c\/li\u003e\n  \u003cli\u003eDesigned to match original lens optics and alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? If you own a 1999–2004 Ford Super Duty F250, F350, F450, or F550 and need a direct-fit replacement for worn, cloudy, or damaged factory headlights, this Nilight chrome housing set is made for you. It’s suited to truck owners seeking an OEM-style look with durable construction, technicians performing routine restorations, or buyers who prefer a sealed, maintenance-friendly assembly that meets DOT standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights require vehicle modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No vehicle modifications are needed; they are bolt-on replacements using factory mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included with the assemblies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most listings include housings only—verify product details; bulbs may require separate purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Nilight","offers":[{"title":"Default Title","offer_id":67584894075065,"sku":"B092VYZ9R6","price":276.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/nilight-front-assembly-chrome-super-duty.jpg?v=1790457998"},{"product_id":"kuiperauto-headlight-assembly-for-1999-2006-gmc-sierra-2000-2006-yukon-chrome-housing-clear-lens-halogen","title":"KUIPERAUTO Headlight Assembly for 1999–2006 GMC Sierra \/ 2000–2006 Yukon — Chrome Housing, Clear Lens, Halogen","description":"\u003cp\u003e\u003cstrong\u003eKUIPERAUTO's front headlight assembly is a direct-fit replacement for select 1999–2007 GMC Sierra and 2000–2006 GMC Yukon models, offering chrome housing, clear lens, clear corner, and halogen high\/low beams for restored factory-style illumination.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace foggy, cracked, or dim original headlights with a precision-engineered assembly designed to match OEM contours and mounting points. This unit comes with halogen high\/low beam bulbs (9005 and 9006) installed, chrome reflector finish for optimized light return, and a clear lens\/corner look that refreshes both function and curb appeal. Built from UV- and wear-resistant materials and vacuum-tested to IP67, the lamp aims to resist moisture, dust, and fogging under normal road conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWill this headlight assembly fit my GMC Sierra or Yukon?\u003c\/h3\u003e\n\u003cp\u003eYes — KUIPERAUTO made this assembly to fit multiple Sierra and Yukon model years and trims by matching OEM dimensions and connector locations. Confirm compatibility by cross-referencing OEM part numbers or model year ranges before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: 1999–2006 GMC Sierra 1500\/2500; 2001–2006 Sierra HD 1500\/2500\/3500; 2007 Sierra Classic 1500\/2500\/3500\u003c\/li\u003e\n  \u003cli\u003eAlso fits: 2000–2006 GMC Yukon and Yukon XL 1500\/2500\u003c\/li\u003e\n  \u003cli\u003eOEM part numbers matched: 1221-0060R\/L, 114-00955AR\/114-00956AL, 15850351\/15850352, 2502188, 2503188\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation — do I need special tools or wiring?\u003c\/h3\u003e\n\u003cp\u003eThis headlight is built for plug-and-play replacement: mounting tabs, connector shape, and clips align with factory locations so most owners can complete the swap without vehicle modifications. Basic hand tools are typically sufficient; no splicing or special controllers are required for the included halogen beams.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design with OEM-style connectors and clips\u003c\/li\u003e\n  \u003cli\u003eTypical install time: 30–60 minutes per side depending on access\u003c\/li\u003e\n  \u003cli\u003eIncluded: 9005 (high) and 9006 (low) halogen bulbs; 3157A turn\/parking bulbs not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe assembly uses UV-resistant plastics and a high-permeability sealant between lens and housing to limit water ingress and fogging. Reflectors are chromed and engineered to produce a clean cutoff line that improves roadway illumination while minimizing glare for oncoming drivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterials: wear- and UV-resistant plastics for long-term clarity\u003c\/li\u003e\n  \u003cli\u003eSealing: vacuum-tested to IP67 for waterproof and dust protection\u003c\/li\u003e\n  \u003cli\u003eOptics: updated reflectors and cutoff line to reduce dark spots and glare\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this lamp meet safety or regulatory standards?\u003c\/h3\u003e\n\u003cp\u003eKUIPERAUTO assemblies are SAE and DOT inspected to align with common U.S. lighting regulations. The intent is to provide comparable legal performance to the original equipment without modifying the vehicle’s approved lighting pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSAE \u0026amp; DOT inspected and approved\u003c\/li\u003e\n  \u003cli\u003eDesigned to restore factory beam pattern and alignment\u003c\/li\u003e\n  \u003cli\u003ePre-installed halogen bulbs sized to OEM specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This KUIPERAUTO headlight assembly is aimed at GMC owners who need a reliable, factory-style replacement for worn or damaged fronts on Sierra 1500\/2500 and Yukon models from the listed years. It's a practical choice for DIY installers, fleet maintenance, and anyone who wants to restore appearance and roadway visibility without aftermarket wiring or body modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the bulbs included with this headlight assembly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: High\/low beam halogen bulbs (9005 and 9006) are included; turn signal\/parking 3157A bulbs are not supplied.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this part fit my 2003 GMC Yukon?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits 2000–2006 GMC Yukon models; confirm by matching your vehicle year and OEM part numbers listed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KUIPERAUTO","offers":[{"title":"Default Title","offer_id":67584895549625,"sku":"B0CN2SBCTP","price":196.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kuiperauto-front-view-headlight-assembly.jpg?v=1790458086"},{"product_id":"kuiperauto-headlight-assembly-for-1999-2006-gmc-sierra-yukon-black-housing-clear-lens-halogen-9005-9006","title":"KUIPERAUTO Headlight Assembly for 1999-2006 GMC Sierra\/Yukon — Black Housing Clear Lens, Halogen 9005\/9006","description":"\u003cstrong\u003eDirectly replace your worn headlight with this KUIPERAUTO OEM-style front lamp built for select GMC Sierra and Yukon models.\u003c\/strong\u003e\n\n\u003cp\u003eThis headlight assembly is a factory-fit style replacement engineered to restore original appearance and function for 1999–2006 GMC Sierra trucks and 2000–2006 GMC Yukon\/Yukon XL models. It pairs a black housing with a clear lens and clear corner for a modern, clean look while using halogen 9005\/9006 bulbs for high and low beams. The assembly is manufactured to match OEM mounting points and electrical connections so installation is straightforward.\u003c\/p\u003e\n\n\u003ch3\u003eWill this headlight fit my specific GMC model and year?\u003c\/h3\u003e\n\u003cp\u003eYes — the lens and mounting locations are designed to match the original equipment specifications for the listed model years. Confirm compatibility by checking your vehicle's year and OEM part numbers if available.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 1999–2006 GMC Sierra 1500\/2500 and multiple HD variants.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2000–2006 GMC Yukon and Yukon XL 1500\/2500 models.\u003c\/li\u003e\n  \u003cli\u003eMatches OEM part numbers such as 1221-0060R\/L and 15850351\/15850352 for reference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation — do I need special tools or wiring?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is made to be plug-and-play and uses the same connectors and clip locations as the original unit, so most DIYers can swap it without advanced wiring or modifications. Basic hand tools and a short amount of time are typically all that's required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses standard OEM-style electrical plugs for direct connection.\u003c\/li\u003e\n  \u003cli\u003eMounting tabs and clips line up with the factory holes for easy fitment.\u003c\/li\u003e\n  \u003cli\u003eNo cutting, splicing, or special adapters required for standard models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and performance features I should expect?\u003c\/h3\u003e\n\u003cp\u003eThe lamp uses UV-resistant plastics and a high-permeability sealant to resist fogging and moisture intrusion, and it undergoes vacuum testing to confirm waterproofing. Reflector and lens design provide a defined cutoff line to focus light on the road while reducing glare for oncoming drivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack housing with clear lens and corner for improved styling.\u003c\/li\u003e\n  \u003cli\u003eHalogen high\/low beam configuration using 9005 (high) and 9006 (low) bulbs.\u003c\/li\u003e\n  \u003cli\u003eVacuum-tested seals and SAE\/DOT compliance to ensure durability and road legality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this include turn signal bulbs and other hardware?\u003c\/h3\u003e\n\u003cp\u003eThe headlight assembly ships with the high\/low beam halogen bulbs installed, but turn signal bulbs (3157A) are not included, so you may need to reuse your existing signal bulbs or purchase replacements. Mounting hardware is designed to use the vehicle's original fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: Halogen 9005 and 9006 for high and low beams.\u003c\/li\u003e\n  \u003cli\u003eNot included: Turn\/parking signal bulb 3157A needs to be supplied separately.\u003c\/li\u003e\n  \u003cli\u003eDesigned to accept factory mounting screws and retainers for a clean fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This KUIPERAUTO headlight assembly is aimed at GMC owners who need a dependable, OEM-style replacement to restore lighting performance and vehicle appearance. It's a good choice for DIY mechanics, restoration projects, or anyone replacing aged, fogged, or cracked factory headlights on compatible Sierra and Yukon models who wants a direct-fit part that meets DOT\/SAE standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this headlight come with bulbs installed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, high and low beam halogen bulbs (9005 and 9006) are included; the turn signal bulb (3157A) is not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this an exact plug-and-play replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it matches OEM mounting points and connectors for straightforward installation without modifications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KUIPERAUTO","offers":[{"title":"Default Title","offer_id":67584895516857,"sku":"B0CN2SDJP2","price":183.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kuiperoauto-headlight-front-assembly.jpg?v=1790458086"},{"product_id":"kuiperauto-headlight-assembly-for-1999-2006-gmc-sierra-2000-2006-yukon-black-housing-smoked-lens-includes-halogen-bulbs","title":"KUIPERAUTO Headlight Assembly for 1999-2006 GMC Sierra \u0026 2000-2006 Yukon — Black Housing, Smoked Lens, Includes Halogen Bulbs","description":"\u003cp\u003e\u003cstrong\u003eKUIPERAUTO replacement headlight assembly for select GMC Sierra and Yukon models — OEM-fit black housing with smoked lens, clear corner, and included halogen bulbs for high\/low beam.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a 1999–2006 GMC Sierra or a 2000–2006 GMC Yukon, this KUIPERAUTO headlight assembly is built to restore factory-style lighting performance while adding a sleek blacked-out look. Engineered to match OE mounting points and electrical connectors, the pair ships with 9005 and 9006 halogen bulbs installed for immediate plug-and-play installation. The smoked lens and clear corner offer a modern, subdued appearance without compromising the lighting cutoff or road safety.\u003c\/p\u003e\n\n\u003ch3\u003eWill this headlight fit my GMC Sierra or Yukon?\u003c\/h3\u003e\n\u003cp\u003eYes — the assemblies are designed for direct replacement on specific model years and trims. They correspond to multiple OEM part numbers and fit exact mounting points so no modifications are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 1999–2006 GMC Sierra 1500\/2500 and 2001–2006 Sierra HD models\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2000–2006 GMC Yukon and Yukon XL 1500\/2500\u003c\/li\u003e\n  \u003cli\u003eMatches OEM part numbers such as 1221-0060R\/L, 15850351\/352, and others\u003c\/li\u003e\n  \u003cli\u003eDesigned to install directly using original electrical connectors and clips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what comes included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward because each assembly is manufactured to OEM-style specifications, including factory clip locations and connector interfaces. The headlights arrive with high\/low beam halogen bulbs installed; turn signal bulbs are not included.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play design — no cutting or custom wiring required\u003c\/li\u003e\n  \u003cli\u003eIncludes halogen 9005 (high) and 9006 (low) bulbs pre-installed\u003c\/li\u003e\n  \u003cli\u003eTurn\/park bulb 3157A not included — uses original sockets\u003c\/li\u003e\n  \u003cli\u003eMounts align with factory holes for a quick swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and performance features?\u003c\/h3\u003e\n\u003cp\u003eEach lamp uses UV- and wear-resistant plastics with a high-permeability sealant between lens and housing to block moisture and dust. The reflector and chrome treatment provide a defined cutoff line to enhance roadway illumination while reducing glare for oncoming traffic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable black housing with smoked lens and clear corner styling\u003c\/li\u003e\n  \u003cli\u003eSAE \u0026amp; DOT inspected, vacuum tested to IP67 for waterproofing\u003c\/li\u003e\n  \u003cli\u003eUpdated reflectors and chrome plating for uniform lighting pattern\u003c\/li\u003e\n  \u003cli\u003eSealant applied to prevent fogging, dust ingress, and moisture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these headlights affect visibility or safety?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies are designed to deliver a consistent beam pattern with a clear cutoff line so driving visibility improves without causing glare to other motorists. They comply with SAE and DOT standards and are inspected for light distribution and waterproofing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecise cutoff line protects oncoming drivers from glare\u003c\/li\u003e\n  \u003cli\u003eEven illumination reduces dark spots and shadowing on the road\u003c\/li\u003e\n  \u003cli\u003eVacuum-tested lens and housing help maintain clarity over time\u003c\/li\u003e\n  \u003cli\u003eReflector geometry enhances usable beam spread for night driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers of compatible GMC Sierra and Yukon trucks who want a reliable, OEM-fit replacement with a modern blacked-out aesthetic. This product suits owners replacing old, fogged, or damaged headlights who prefer a direct-swap solution with factory-style performance and improved protection against moisture and dust. Mechanics, DIY enthusiasts, and fleet managers looking for dependable fitment and tested construction will appreciate the plug-and-play design and included halogen bulbs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights include bulbs and are turn signal bulbs provided?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: High\/low beam halogen bulbs (9005 and 9006) come pre-installed. Turn signal\/parking bulb 3157A is not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these headlights waterproof and DOT compliant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are SAE \u0026amp; DOT inspected, vacuum-tested for IP67-level waterproofing, and sealed against fog and dust.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KUIPERAUTO","offers":[{"title":"Default Title","offer_id":67584895484089,"sku":"B0D25D7D1H","price":204.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kuiperauto-front-assembly-pair.jpg?v=1790458086"},{"product_id":"weelmoto-drl-headlights-for-toyota-tacoma-2016-2022-trd-limited-matte-black-plug-and-play","title":"WEELMOTO DRL Headlights for Toyota Tacoma 2016–2022 TRD\/Limited — Matte-Black, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eThese are direct-fit factory-style DRL replacement headlights made by WEELMOTO for 2016–2022 Toyota Tacoma TRD and Limited models with factory LED DRLs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a one-to-one replacement for your Tacoma’s original DRL headlight assemblies, these WEELMOTO units match OEM fitment (OEM# 81150-04270 \/ 81110-04270) and are built to DOT and SAE standards. They retain the factory look with a modern matte-black housing and are intended for trucks that already have factory LED DRLs—bulbs are not included and stock bulbs should be reused during installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my Tacoma and what models are supported?\u003c\/h3\u003e\n\u003cp\u003eThese headlights are manufactured to directly replace the factory DRL assemblies on 2016–2022 Toyota Tacoma trucks specifically in TRD and Limited trims that shipped with factory LED DRLs. Confirm your current headlight part numbers or that your Tacoma uses LED DRLs before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact OEM match: 81150-04270 \/ 81110-04270\u003c\/li\u003e\n  \u003cli\u003eCompatible years: 2016, 2017, 2018, 2019, 2020, 2021, 2022\u003c\/li\u003e\n  \u003cli\u003eTrim fit: TRD and Limited with factory LED DRLs only\u003c\/li\u003e\n  \u003cli\u003eNote: bulbs are not included; use existing stock bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes with the lights?\u003c\/h3\u003e\n\u003cp\u003eWEELMOTO engineered these units for plug-and-play replacement to minimize modification. The headlights arrive with an installation manual and connector matches that align with factory wiring; most owners or technicians can complete the swap using basic hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connectors for direct wiring match\u003c\/li\u003e\n  \u003cli\u003eDetailed installation manual included\u003c\/li\u003e\n  \u003cli\u003eNo additional modules required if reusing stock bulbs\u003c\/li\u003e\n  \u003cli\u003eWEELMOTO offers one-to-one service support and a 3-year assurance period\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality and durability testing backs these headlights?\u003c\/h3\u003e\n\u003cp\u003eManufactured under an IATF16949 quality system, the headlights undergo extensive durability testing—drop, vibration, rain, UV, sand and dust—to ensure reliable field performance. The assemblies are designed to meet DOT and SAE lighting standards for legal road use and to provide an optimized light pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDOT-compliant design and SAE-optimized beam pattern\u003c\/li\u003e\n  \u003cli\u003eIATF16949 certified production facility\u003c\/li\u003e\n  \u003cli\u003eMultiple environmental and impact tests for longevity\u003c\/li\u003e\n  \u003cli\u003eHigh-durability materials and matte black glare-resistant housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat aesthetic and functional differences will I notice?\u003c\/h3\u003e\n\u003cp\u003eThe matte-black housing gives the front end a contemporary, anti-glare appearance while matching OEM proportions so the truck retains its original lines. Functionally, these assemblies are tuned for bright, well-defined DRL performance when paired with your existing bulbs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatte-black finish resists glare and hides road grime\u003c\/li\u003e\n  \u003cli\u003eOEM-sized lenses preserve factory styling and fit\u003c\/li\u003e\n  \u003cli\u003eEngineered light pattern for clarity and road coverage\u003c\/li\u003e\n  \u003cli\u003eDesigned to work with stock bulbs to maintain expected output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These WEELMOTO factory DRL headlights are intended for Toyota Tacoma owners (2016–2022 TRD or Limited) who need a direct OEM-style replacement for damaged or aging DRL assemblies and who already have factory LED DRLs. Choose these units if you want a hassle-free swap, DOT-compliant performance, and a durable matte-black appearance while continuing to use your existing bulbs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Bulbs are not included; you should reuse your Tacoma’s stock bulbs during installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit a non-LED DRL Tacoma?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These are made to fit Tacoma models that came from factory with LED DRLs only.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WEELMOTO","offers":[{"title":"Default Title","offer_id":67584895811769,"sku":"B0CZL6C7RB","price":444.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/weelmoto-front-assembly-tacoma-factory-drl.jpg?v=1790458107"},{"product_id":"neoxist-fog-lights-for-toyota-tundra-2022-2026-oem-fit-led-drl-with-amber-sequential-turn-signals-ip68","title":"NEOXIST Fog Lights for Toyota Tundra 2022–2026 — OEM-Fit LED DRL with Amber Sequential Turn Signals, IP68","description":"\u003cp\u003e\u003cstrong\u003eNEOXIST fog lights for Toyota Tundra (2022–2026) are a direct OEM-fit LED replacement that combines white daytime running lights with amber sequential turn signals for improved visibility and a modern look.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese NEOXIST front grille fog lights are engineered to replace factory units on 3rd-gen Tundra models without modification. They pair a crisp white DRL animation with soft amber sequenced turn indicators, use CANBUS-friendly electronics to avoid dash errors, and are built with durable materials and an IP68 seal for reliable performance in wet or dusty conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these fog lights improve visibility on bad-weather drives?\u003c\/h3\u003e\n\n\u003cp\u003eThe NEOXIST LEDs deliver a controlled beam pattern that lights the road edges and reduces glare, making it easier to see lane markers and obstacles in rain, fog, or snow. The dual-function design ensures both consistent daytime running light output and bright, noticeable turn signaling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eControlled beam pattern tuned for reduced oncoming glare\u003c\/li\u003e\n  \u003cli\u003eWhite DRL for increased daytime presence\u003c\/li\u003e\n  \u003cli\u003eAmber sequential turn signals that enhance side visibility\u003c\/li\u003e\n  \u003cli\u003eHigh-response LEDs that activate faster than halogen bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fog lights fit my Tundra and integrate with factory electronics?\u003c\/h3\u003e\n\n\u003cp\u003eYes — these are factory-fit replacements for Toyota Tundra models from 2022 through 2026, matching OEM part numbers 52821-0C010 and 52822-0C010. They include CANBUS-ready components to prevent hyper-flash, error codes, or dashboard warnings when installed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect OEM compatibility with SR, SR5, Limited, 1794, Capstone, Platinum, TRD Pro, TRD Off-road\u003c\/li\u003e\n  \u003cli\u003eBuilt-in resistor design for error-free integration\u003c\/li\u003e\n  \u003cli\u003eNo front bumper removal required for installation\u003c\/li\u003e\n  \u003cli\u003eClear step-by-step manual with wiring diagrams included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and legal are these lights for everyday and off-road use?\u003c\/h3\u003e\n\n\u003cp\u003eConstructed from impact-resistant ABS housing and a shatterproof polycarbonate lens, the lights meet IP68 protection for water and dust, making them suitable for both daily driving and rugged off-road conditions. They are designed with a street-legal output and a soft amber signal to comply with on-road regulations while improving safety.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP68 waterproof and dustproof rating for harsh environments\u003c\/li\u003e\n  \u003cli\u003eABS and PC materials resist impacts and abrasion\u003c\/li\u003e\n  \u003cli\u003eEngineered beam and amber output to minimize glare and remain compliant\u003c\/li\u003e\n  \u003cli\u003e1-year after-sales support for swift replacement if issues arise\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the installation and what styling changes should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: the kit replaces the factory fog assemblies and trim pieces without the need to remove the bumper. Once fitted, the lights add a sleek black-housing aesthetic and a modern DRL animation that updates the Tundra’s front-end appearance without extensive modification.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play fitment for fast, tool-light installation\u003c\/li\u003e\n  \u003cli\u003eIncludes printed manual with diagrams for guidance\u003c\/li\u003e\n  \u003cli\u003eBlack housing integrates with all factory trims for a factory-plus look\u003c\/li\u003e\n  \u003cli\u003eInstant-on LED response improves signaling reaction time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The NEOXIST fog light kit is ideal for Toyota Tundra owners (2022–2026) who want an OEM-style upgrade that enhances visibility, modernizes the truck’s front end, and integrates seamlessly with factory wiring. It suits daily drivers who need reliable, street-legal lighting as well as off-road enthusiasts who require durable, weatherproof components that hold up in mud, snow, and dust.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fog lights fit all Tundra 2022–2026 trims?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They’re direct OEM replacements for SR, SR5, Limited, 1794 Edition, Capstone, Platinum, TRD Pro, and TRD Off-road models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will they cause dashboard errors or hyper-flash?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Built-in CANBUS-ready resistors prevent hyper-flash and dashboard warnings for seamless integration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"NEOXIST","offers":[{"title":"Default Title","offer_id":67584896303289,"sku":"B0DZNFMDT1","price":219.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/neoxist-front-view-installed-tundra.jpg?v=1790458127"},{"product_id":"weelmoto-honda-civic-headlights-pair-for-2012-2015-sedan-2012-2013-coupe-chrome-housing-amber-reflectors-plug-and-play","title":"WEELMOTO Honda Civic Headlights Pair for 2012-2015 Sedan \/ 2012-2013 Coupe — Chrome Housing, Amber Reflectors, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eWEELMOTO replacement headlight pair designed to fit 2012–2015 Honda Civic 4-door sedans and 2012–2013 2-door coupes (does NOT fit Hybrid or Hybrid-L models).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese chrome-housing headlamp assemblies match OEM fitment (OEM# 33100-TR0-A01 \/ 33150-TR0-A01) and are built to DOT-compliant standards with IATF16949 quality controls. They come as a left-and-right pair with amber reflectors, durable chrome bezels and a plug-and-play layout for straightforward installation. Bulbs are not included; use your vehicle’s stock bulbs or compatible replacements.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my Honda Civic?\u003c\/h3\u003e\n\u003cp\u003eThey’re engineered to be a direct replacement for 2012–2015 Honda Civic 4-door sedans and 2012–2013 Civic 2-door coupes when your car uses the listed OEM assemblies. They will not fit Hybrid or Hybrid-L variants, so double-check your model and OEM part numbers before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM numbers: 33100-TR0-A01 (left) and 33150-TR0-A01 (right)\u003c\/li\u003e\n  \u003cli\u003eFitment: 2012–2015 Civic 4Dr Sedan; 2012–2013 Civic 2Dr Coupe\u003c\/li\u003e\n  \u003cli\u003eNot compatible: Hybrid or Hybrid-L models\u003c\/li\u003e\n  \u003cli\u003eBulbs: not included — use factory bulbs or recommended replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these headlights perform in real-world conditions?\u003c\/h3\u003e\n\u003cp\u003eWEELMOTO designs these headlamps to produce a clear SAE-approved light pattern and to withstand everyday road stresses. They undergo drop, vibration, rain, UV, sand and dust testing to ensure long-term durability and stable optics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLight pattern tuned to SAE guidelines for predictable beam spread\u003c\/li\u003e\n  \u003cli\u003eDurability testing: vibration, drop, rain, UV and dust resistance\u003c\/li\u003e\n  \u003cli\u003eChrome bezel plating for corrosion resistance and brightness retention\u003c\/li\u003e\n  \u003cli\u003eMaterials chosen for extended service life under road conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes with the headlights?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies use a plug-and-play design intended to mirror factory connections, making them straightforward to install for home mechanics or professionals. WEELMOTO includes an installation manual and offers customer support plus a 3-year assurance period for added confidence.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play electrical connectors for simple swap-in replacement\u003c\/li\u003e\n  \u003cli\u003eInstallation manual included with each pair\u003c\/li\u003e\n  \u003cli\u003eCustomer support via WEELMOTO seller page (“ask a question”)\u003c\/li\u003e\n  \u003cli\u003e3-year assurance period for parts-related concerns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these headlights certified and manufactured to quality standards?\u003c\/h3\u003e\n\u003cp\u003eThe product is manufactured under quality controls that meet IATF16949 processes and designed to conform to DOT requirements for safety. That manufacturing oversight aims to ensure consistent build quality and compliance with road-safety expectations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIATF16949 quality system certification for automotive production standards\u003c\/li\u003e\n  \u003cli\u003eDOT-compliant design for legal on-road use\u003c\/li\u003e\n  \u003cli\u003eProfessional manufacturing and inspection processes\u003c\/li\u003e\n  \u003cli\u003eTested optics and housing to maintain performance over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: Drivers who need a direct-fit replacement for damaged or fogged headlamps on 2012–2015 Honda Civic sedans or 2012–2013 Civic coupes (non-hybrid). Choose these WEELMOTO assemblies if you want OEM-matching fitment, chrome-style styling, SAE-tuned beam performance and a product backed by manufacturer testing and a three-year assurance period. Verify your Civic’s model year and that it is not a Hybrid\/Hybrid-L before purchase, and plan to reuse or supply compatible bulbs during installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, bulbs are not included. Use your factory bulbs or purchase compatible replacements separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will they fit a Hybrid Civic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These assemblies do NOT fit Hybrid or Hybrid-L models. Fitment is for non-hybrid 2012–2015 sedans and 2012–2013 coupes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WEELMOTO","offers":[{"title":"Default Title","offer_id":67584898138297,"sku":"B0CQCJW12N","price":340.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/weelmoto-front-assembly-pair.jpg?v=1790458196"},{"product_id":"partsam-5-piece-amber-led-torpedo-cab-marker-lights-17-leds-clear-lens-chrome-housing-universal-fit","title":"Partsam 5-Piece Amber LED Torpedo Cab Marker Lights - 17 LEDs, Clear Lens Chrome Housing, Universal Fit","description":"\u003cp\u003e\u003cstrong\u003ePartsam’s 5-piece amber torpedo cab marker light assembly is a universal, high-visibility roof running light set with 17 bright LEDs in a clear lens and chrome housing designed for heavy-duty trucks and similar vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese five top-of-cab markers combine an aerodynamic torpedo shape, a clear lens, and amber LEDs to increase on-road visibility while matching the style of Kenworth, Peterbilt, Freightliner, International, Mack and other semi trucks. The assembly is built for harsh environments: each LED is individually wired and sealed to resist water and impacts, and the chrome housing gives a professional, polished look. Installation replaces factory cab lights using the mounting holes specified below and standard wiring conventions.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright and durable are these 17 LED marker lights?\u003c\/h3\u003e\n\u003cp\u003eThe 17 LEDs deliver a strong amber glow intended for clear night and daytime visibility without altering vehicle electrical systems. Each LED is individually wired and sealed to help prevent shorting from moisture or shock, and the lens and housing are formed to resist common wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e17 high-intensity amber LEDs per 5-piece assembly\u003c\/li\u003e\n  \u003cli\u003eClear lens with chrome torpedo housing for consistent light output\u003c\/li\u003e\n  \u003cli\u003eWater-tight sealing around each LED to reduce corrosion risk\u003c\/li\u003e\n  \u003cli\u003eImpact-resistant construction for heavy-duty road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my truck and how do I install them?\u003c\/h3\u003e\n\u003cp\u003eThese markers are designed as universal replacements for many heavy-duty vehicles, including Kenworth, Peterbilt, Freightliner, Western Star, International, Mack and Paccar models. Installation is straightforward: remove the old cab lights, align to the specified hole spacing, and connect the two wires per light—white for negative\/ground and black for positive\/hot.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall assembly dimension: 15.55\" x 3.54\"\u003c\/li\u003e\n  \u003cli\u003eHole-to-hole mounting distance: 9.84\" for alignment with many factory patterns\u003c\/li\u003e\n  \u003cli\u003eTwo-wire connection per light — white (negative), black (positive)\u003c\/li\u003e\n  \u003cli\u003eBasic hardware may be required for your truck’s mounting type (verify before install)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical and compatibility notes should I know before buying?\u003c\/h3\u003e\n\u003cp\u003eThe lights use a simple 2-wire hookup and are compatible with standard 12V truck electrical systems. Because each LED is sealed and wired individually, failure of a single diode is less likely to compromise the entire lamp; however, always confirm your vehicle’s polarity and fuse ratings before connecting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard 12V DC wiring: white negative, black positive\u003c\/li\u003e\n  \u003cli\u003eRecommended to check fuse size and circuit load prior to installation\u003c\/li\u003e\n  \u003cli\u003eIndividually wired LEDs reduce cascading failures\u003c\/li\u003e\n  \u003cli\u003eDesigned for trucks, trailers, tractors, buses, dump trucks, and specialty vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers, fleets, and mechanics who want a reliable, stylish, and weather-resistant set of cab roof running lights will find this Partsam 5-piece assembly a practical upgrade. It suits owner-operators who need a factory-style replacement with strong amber visibility and shops that frequently service Kenworth, Peterbilt, Freightliner, International, Mack, Western Star, Paccar and similar heavy-duty trucks. If you require easy installation, sealed LEDs, and a chrome finish to match a professional cab appearance, this assembly is intended for that use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lights work with 12V truck systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are designed for standard 12V DC truck electrical systems using white negative and black positive wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting screws and hardware included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic mounting hardware may not be included; verify your truck’s mounting needs before installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partsam","offers":[{"title":"Default Title","offer_id":67584898302137,"sku":"B01DZNDFCS","price":215.26,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partsam-front-view-assembly.jpg?v=1790458220"},{"product_id":"adcarlights-halogen-headlight-assembly-for-2000-2006-chevy-tahoe-oe-fit-uv-coated-weatherproof-lens-no-bulbs","title":"ADCARLIGHTS Halogen Headlight Assembly for 2000-2006 Chevy Tahoe — OE-Fit, UV-Coated Weatherproof Lens, No Bulbs","description":"\u003cp\u003e\u003cstrong\u003eADCARLIGHTS halogen headlight assemblies replace OE units for many 2000–2006 Chevy Tahoe models, delivering OE-style fit and improved clarity without bulbs included.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese direct-replacement halogen headlight assemblies are built to match original equipment dimensions and mounting points for several Chevy models from 2000 through 2006. Constructed with a high-transmittance polycarbonate lens and durable housing, they provide clearer optics and weather resistance. Note: bulbs are not included and this unit does not fit the 2000 Chevy Tahoe Z71 model.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my Chevy Tahoe or Suburban?\u003c\/h3\u003e\n\u003cp\u003eThey are engineered to fit specific OE part numbers used across various Silverado, Tahoe and Suburban years. Confirm fitment against your vehicle's year and OEM\/partslink numbers before purchase to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many 2000–2006 Tahoe and Suburban models (excluding 2000 Tahoe Z71).\u003c\/li\u003e\n  \u003cli\u003eMatches OEM mounting locations and electrical connector style — plug-and-play installation.\u003c\/li\u003e\n  \u003cli\u003eOE\/Manufacturer reference numbers included for verification (e.g., OEM: 15199559, 15199558, 165261334, 165261333).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these headlights perform compared with original equipment?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies use a UV-coated polycarbonate lens with high light transmittance for sharper, clearer beam output and longer lens life. While bulbs are not supplied, the lens and reflector design aim to maintain or improve optical performance when paired with proper halogen bulbs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-transmittance PC lens improves clarity and reduces haze.\u003c\/li\u003e\n  \u003cli\u003eUV coating resists yellowing and weathering for extended lifespan.\u003c\/li\u003e\n  \u003cli\u003eReflector and housing tuned for consistent halogen beam patterns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these headlights durable and weatherproof?\u003c\/h3\u003e\n\u003cp\u003eYes — the assemblies feature a sealed, heavy-duty housing and meet IP65-level protections to keep out dust and water spray. The watertight seals and robust build help prevent fogging and moisture intrusion under typical driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65-rated sealing for dust and water spray resistance.\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty housing designed for road vibration and elements.\u003c\/li\u003e\n  \u003cli\u003eFactory-style seals reduce risk of internal condensation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what do I need to finish the job?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward: the assembly aligns with factory mounting points and electrical connectors for a plug-and-play swap. You will need to supply the appropriate halogen bulbs and basic tools to remove the old assembly and secure the new one.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connectors — no vehicle modification required.\u003c\/li\u003e\n  \u003cli\u003eBulbs are not included; select compatible halogen bulbs separately.\u003c\/li\u003e\n  \u003cli\u003eTypical installation requires common hand tools and about an hour per side.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These headlight assemblies are intended for owners of compatible Chevy Silverado, Tahoe, and Suburban models from 2000 to 2006 who want a reliable OE-fit replacement with improved lens clarity and weather resistance. Choose this part if your current headlight is cracked, yellowed, leaking, or failing to hold bulbs securely — and be sure to check the listed OEM and Partslink references to verify fitment for your vehicle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, bulbs are not included. You must purchase compatible halogen bulbs separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit a 2000 Chevy Tahoe Z71?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This assembly does not fit the 2000 Chevy Tahoe Z71 model.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ADCARLIGHTS","offers":[{"title":"Default Title","offer_id":67584898531513,"sku":"B0BCHPZZNF","price":223.61,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/adcarlights-front-assembly-chevy-tahoe.jpg?v=1790458222"},{"product_id":"kuiperauto-headlight-assembly-for-1999-2006-chevy-silverado-suburban-tahoe-chrome-housing-clear-lens-bulbs","title":"KUIPERAUTO Headlight Assembly for 1999–2006 Chevy Silverado\/Suburban\/Tahoe — Chrome Housing Clear Lens, Bulbs","description":"\u003cstrong\u003eKUIPERAUTO’s OEM-style headlight assembly replaces worn or damaged front lamps on compatible 1999–2006 Chevrolet Silverado, Suburban and Tahoe models, delivering a direct-fit, weatherproof lighting solution with included halogen bulbs.\u003c\/strong\u003e\n\n\u003cp\u003eThis headlight assembly is engineered to match factory form and function while upgrading clarity and durability. It comes with chrome housing, a clear lens and corner, plus 9005\/9006 halogen bulbs installed, making it a near drop-in replacement for many Chevy trucks and SUVs from the late '90s to mid-2000s. Every unit is vacuum-tested for waterproofing, features UV protection to resist lens peeling, and is SAE \u0026amp; DOT approved for road use.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this headlight fit?\u003c\/h3\u003e\n\u003cp\u003eThis KUIPERAUTO assembly is designed specifically to replace factory front lamps on a range of Chevrolet models. Confirm fitment by model year and OEM part numbers before purchase to ensure proper compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1999–2002 Chevrolet Silverado 1500 \/ 2500\u003c\/li\u003e\n  \u003cli\u003e2001–2002 Silverado 1500HD \/ 2500HD \/ 3500\u003c\/li\u003e\n  \u003cli\u003e2000–2006 Chevrolet Suburban 1500 \/ 2500\u003c\/li\u003e\n  \u003cli\u003e2000–2006 Chevrolet Tahoe (not compatible with 2000 Tahoe Z71)\u003c\/li\u003e\n  \u003cli\u003eOEM part numbers matched: 16526133, 16526134, 16524403, 16524404\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eThis headlight assembly is built for a plug-and-play swap, reducing installation time for DIYers and professional installers alike. It includes OE-style connectors and mounting clips so the unit seats into the original mounting points without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for original mounting holes\u003c\/li\u003e\n  \u003cli\u003eOE connector and clips included for straightforward hookup\u003c\/li\u003e\n  \u003cli\u003eHigh\/low beam adjuster accessible for aiming the beam\u003c\/li\u003e\n  \u003cli\u003e9005 (high) and 9006 (low) halogen bulbs installed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and performance features does this headlight offer?\u003c\/h3\u003e\n\u003cp\u003eKUIPERAUTO focuses on longevity and safe beam control. The lens and seals undergo a three-step inspection plus vacuum testing to ensure airtight, waterproof performance, and reflectors are updated to create a clean cutoff line that reduces glare for oncoming drivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP85-rated waterproof vacuum testing to prevent fogging\u003c\/li\u003e\n  \u003cli\u003eUV-resistant lens treatment to minimize peeling and yellowing\u003c\/li\u003e\n  \u003cli\u003eUpdated reflectors and clip-on lens hole for a precise lighting pattern\u003c\/li\u003e\n  \u003cli\u003eSAE \u0026amp; DOT approval for compliant on-road performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this improve nighttime visibility and reduce glare?\u003c\/h3\u003e\n\u003cp\u003eThe assembly’s refined reflector geometry and clear optics aim to produce a consistent, well-defined beam with a cutoff line. That helps expand usable visibility down the road while avoiding scattered light that can blind other drivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean cutoff line to protect oncoming traffic\u003c\/li\u003e\n  \u003cli\u003eEven illumination with no dark spots across the beam\u003c\/li\u003e\n  \u003cli\u003eChrome housing optimizes light reflection efficiency\u003c\/li\u003e\n  \u003cli\u003eFactory bulb types included for predictable output and color temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This replacement headlight is intended for owners of compatible Chevrolet Silverado, Suburban and Tahoe trucks and SUVs who need a reliable, OEM-style front lamp—whether restoring original appearance, replacing weathered or cracked lenses, or upgrading worn lighting components. It suits DIY mechanics, independent shops and fleet managers looking for a direct-fit part with tested weatherproofing and straightforward installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this headlight include bulbs and wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It ships with 9005 and 9006 halogen bulbs installed and OE-style connectors for direct plug-and-play installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this assembly waterproof and road-legal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The unit is vacuum-tested for IP85 waterproofing and is SAE \u0026amp; DOT approved for street use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KUIPERAUTO","offers":[{"title":"Default Title","offer_id":67584898793657,"sku":"B0CN2PC152","price":200.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kuiperauto-front-assembly-chevy-silverado-front-view.jpg?v=1790458240"},{"product_id":"kuiperauto-headlight-assembly-for-1999-2006-chevy-silverado-suburban-tahoe-black-housing-smoked-lens-w-bulbs","title":"KUIPERAUTO Headlight Assembly for 1999-2006 Chevy Silverado\/Suburban\/Tahoe — Black Housing Smoked Lens w\/ Bulbs","description":"\u003cp\u003e\u003cstrong\u003eKUIPERAUTO headlight assembly replaces factory front lamps for select 1999–2006 Chevrolet Silverado, Suburban and Tahoe models, delivering a black-housing, smoked-lens look with included halogen bulbs for a direct-fit upgrade.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement headlight is built to match the original mounting points and electrical connections on compatible Chevrolet trucks and SUVs while giving a refreshed, darker appearance. It includes 9005\/9006 halogen bulbs, OE-style connectors and clips, and features weatherproofing and UV protection to preserve fit and finish. The assembly is SAE and DOT approved and vacuum-tested to resist moisture, helping keep lenses clear over time.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this KUIPERAUTO headlight fit?\u003c\/h3\u003e\n\u003cp\u003eThe assembly was designed to be a direct replacement for multiple Chevrolet model years and trims. It fits 1999–2002 Silverado 1500\/2500 models, 2001–2002 Silverado 1500HD\/2500HD\/3500, and 2000–2006 Suburban 1500\/2500 and Tahoe (note: not compatible with 2000 Tahoe Z71).\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM part references: 16526133, 16526134, 16524403, 16524404\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design for existing mounting holes and fasteners\u003c\/li\u003e\n  \u003cli\u003eConfirm fit by comparing part numbers or your vehicle VIN\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eInstallation is plug-and-play: the headlight uses OE-style connectors and includes clips so you can mount it without custom wiring. The assembly arrives with 9005 (high) and 9006 (low) halogen bulbs preinstalled, and features a high\/low beam adjuster for on-vehicle aiming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 9005 + 9006 halogen bulbs\u003c\/li\u003e\n  \u003cli\u003eOE connector and clips for fast replacement\u003c\/li\u003e\n  \u003cli\u003eHigh\/low beam adjuster for proper alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat weather resistance and optical performance does it provide?\u003c\/h3\u003e\n\u003cp\u003eThe headlight assembly is vacuum-tested and rated to resist moisture intrusion, with UV-protected lenses to reduce peeling or yellowing. Updated reflectors and a clip-on lens opening create a defined cutoff line for better beam pattern control and reduced glare toward oncoming drivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP85-like vacuum testing for airtight seals and fog prevention\u003c\/li\u003e\n  \u003cli\u003eUV protection to help prevent lens deterioration\u003c\/li\u003e\n  \u003cli\u003eReflector and lens design for clear cutoff and even illumination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this headlight change my vehicle’s appearance or road visibility?\u003c\/h3\u003e\n\u003cp\u003eThe black housing and smoked lens create a more aggressive, modern look compared with factory chrome assemblies while maintaining a clear corner for turn-signal visibility. The halogen bulbs and reflector design aim to deliver consistent lighting without dark spots, improving usable road illumination within halogen performance limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack housing and smoked lens for a refreshed aesthetic\u003c\/li\u003e\n  \u003cli\u003eClear corner to preserve signal visibility and compliance\u003c\/li\u003e\n  \u003cli\u003eDesigned to avoid dark zones and provide even beam spread\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This KUIPERAUTO headlight assembly suits owners of compatible Chevrolet Silverado, Suburban or Tahoe models who want a direct-fit replacement that upgrades appearance while keeping installation straightforward. It’s a practical choice for drivers replacing fogged, cracked, or damaged factory lamps, or for those seeking a darker housing style without custom fabrication. Always verify your model year and part number compatibility before purchase, and consult local regulations regarding tinted or smoked lighting if required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this headlight include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The assembly ships with 9005 (high) and 9006 (low) halogen bulbs preinstalled.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is it weatherproof and resistant to fogging?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Units are vacuum-tested for airtight seals and have UV-protected lenses to resist moisture and peeling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KUIPERAUTO","offers":[{"title":"Default Title","offer_id":67584898760889,"sku":"B0CN2T9QF1","price":213.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kuiperauto-front-assembly-black-housing.jpg?v=1790458240"},{"product_id":"dna-motoring-chrome-3d-led-drl-headlight-bumper-lamp-set-for-2003-2006-silverado-avalanche-halogen-replacement-pair","title":"DNA MOTORING Chrome 3D LED DRL Headlight \u0026 Bumper Lamp Set for 2003–2006 Silverado\/Avalanche — Halogen Replacement Pair","description":"\u003cp\u003e\u003cstrong\u003eChrome 3D LED daytime-running headlight and bumper lamp set designed to replace halogen assemblies on compatible 2003–2007 Silverado and Avalanche trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade the front-end appearance and visibility of your Chevy truck with this complete headlight and bumper turn-signal assembly set from DNA MOTORING. Engineered for models originally equipped with halogen headlights, the chrome housings feature integrated 3D LED daytime running light bars and include left\/right headlight pairs plus bumper parking\/turn lights. Bulbs for high and low beams are not supplied, and installation requires wiring the DRL bars into the vehicle’s lighting circuit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich truck models will these headlights fit?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are built to match the front-end fitment of late-model Silverado and Avalanche trucks that came with halogen lamps. They fit 2003–2006 Avalanche 1500\/2500 (non-cladding models only), 2003–2006 Silverado 1500\/2500\/3500 and HD, plus 2007 Silverado Classic models listed as halogen-equipped.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with halogen-headlight factory trim only.\u003c\/li\u003e\n  \u003cli\u003eAvalanche fit excludes models with body cladding.\u003c\/li\u003e\n  \u003cli\u003eConfirm your truck’s year and headlamp type before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and what will I still need?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one pair of chrome headlights (left and right) and a matching pair of bumper parking\/turn signal lamps. High and low beam bulbs are not bundled, so you’ll need to source 9005 (high) and 9006 (low) bulbs separately. The DRL bars require wiring into the existing lighting harness to function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: two headlights and two bumper parking\/turn lights.\u003c\/li\u003e\n  \u003cli\u003eRequires separate 9005 and 9006 bulbs (not included).\u003c\/li\u003e\n  \u003cli\u003eDRL bars need wiring; no instruction manual provided.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation level is moderate and best handled by a professional or an experienced DIYer comfortable with headlamp removal and electrical wiring. Because no printed instructions are supplied, plan for tools, wiring connectors, and possibly a multimeter. Test fit and function before final reassembly to ensure correct beam alignment and DRL operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional installation recommended for wiring and alignment.\u003c\/li\u003e\n  \u003cli\u003ePrepare basic tools, wiring supplies, and your 9005\/9006 bulbs.\u003c\/li\u003e\n  \u003cli\u003eAllow extra time to test functionality before closing up panels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat visual and performance changes should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe chrome housings and 3D LED bars refresh the truck’s front-end styling with brighter daytime running accents and a modernized appearance. While the LEDs provide clear DRL illumination, beam output depends on the quality of the aftermarket 9005\/9006 bulbs you install; these assemblies are designed to accept standard halogen beam units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrighter, sculpted chrome faces with integrated LED DRL bars.\u003c\/li\u003e\n  \u003cli\u003eMaintains halogen beam compatibility through standard bulb sockets.\u003c\/li\u003e\n  \u003cli\u003eGives a contemporary look without modifying headlamp mounts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This headlight and bumper lamp set suits owners of 2003–2007 Silverado and Avalanche trucks originally equipped with halogen headlights who want a modern chrome appearance and DRL accent lighting. Choose this kit if you’re comfortable arranging bulb purchases and wiring or if you plan to have a professional installer handle the electrical hookup and alignment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included with these headlights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. High and low beam bulbs (9005 and 9006) are not included and must be purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these fit trucks with factory cladding or HID headlights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They fit halogen-equipped models only and are not compatible with vehicles that have body cladding or factory HID systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DNA MOTORING","offers":[{"title":"Default Title","offer_id":67584898990265,"sku":"B07ZLNNN3C","price":328.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dna-motoring-chrome-headlight-front-assembly.jpg?v=1790458240"},{"product_id":"amerilite-led-tube-tail-lights-for-1988-1999-chevy-gmc-c-k-trucks-suvs-dark-black-smoked-lens-dot-sae-compliant","title":"AmeriLite LED Tube Tail Lights for 1988–1999 Chevy GMC C\/K Trucks \u0026 SUVs — Dark Black Smoked Lens, DOT\/SAE Compliant","description":"\u003cp\u003e\u003cstrong\u003eAmeriLite's dark black C-type LED tube tail light set replaces both driver and passenger rear assemblies for 1988–1999 Chevy and GMC fullsize trucks and SUVs with modern LED illumination in a factory-fit housing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of AmeriLite tail lights is designed as a direct OEM-style replacement for 1988–1999 Chevy and GMC C\/K series fullsize pickup trucks and SUVs — including Blazer, Tahoe, Suburban, Yukon and Escalade models. Built to meet DOT and SAE safety standards, the lights combine a smoked dark black lens aesthetic with energy-efficient LED tube technology. The kit ships as a matched new aftermarket set (left and right), uses premium components manufactured in Taiwan, and installs without cutting or modification so it fits into factory mounting points and plugs.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these AmeriLite LED tail lights improve visibility and style?\u003c\/h3\u003e\n\u003cp\u003eThe LEDs produce a crisp, uniform light pattern that modernizes the rear lighting appearance while maintaining required signal clarity. The dark black lens gives a subdued, customized look when the lights are off but still allows full brightness when active.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLinear LED tube design for even brake and running light output\u003c\/li\u003e\n  \u003cli\u003eSmoked lens balances stealth appearance with visibility\u003c\/li\u003e\n  \u003cli\u003eMeets DOT \u0026amp; SAE standards for on-road use in the U.S. and Canada\u003c\/li\u003e\n  \u003cli\u003eDistinct separation for brake, turn, and reverse functions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these tail lights fit my 1988–1999 Chevy or GMC vehicle without modifications?\u003c\/h3\u003e\n\u003cp\u003eYes — the AmeriLite set is engineered to be a direct replacement for the listed C\/K fullsize trucks and associated SUVs. No cutting, drilling, or wiring harness splicing is required for standard factory configurations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OEM-style mounting locations for simple swap-in installation\u003c\/li\u003e\n  \u003cli\u003eCompatible with factory bulb\/signal circuits and connectors\u003c\/li\u003e\n  \u003cli\u003eIncludes both driver and passenger side assemblies in one package\u003c\/li\u003e\n  \u003cli\u003eReady for plug-and-play installation by DIYers or techs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and quality controls does AmeriLite use for these lights?\u003c\/h3\u003e\n\u003cp\u003eThese tail lights are produced under strict quality control in Taiwan using durable materials to withstand road vibration and weather exposure. The assemblies are checked to meet or exceed safety specifications to ensure reliable performance over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality LED diodes and corrosion-resistant housings\u003c\/li\u003e\n  \u003cli\u003ePrecision-fit lenses and sealed seals to resist moisture intrusion\u003c\/li\u003e\n  \u003cli\u003eManufactured and inspected to meet DOT \u0026amp; SAE regulations\u003c\/li\u003e\n  \u003cli\u003eBacked by AmeriLite quality assurance protocols\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what should I expect during the swap?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same basic steps as the factory tail light replacement: remove the old assembly, unplug the factory connector, position the new AmeriLite unit, and secure it with the existing fasteners. The set is prewired to match stock connectors for a hassle-free exchange.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo vehicle body modifications required for stock configurations\u003c\/li\u003e\n  \u003cli\u003eUses existing screws and mounting points for a secure fit\u003c\/li\u003e\n  \u003cli\u003eCheck alignment and function (brake, turn, reverse) after installation\u003c\/li\u003e\n  \u003cli\u003eRecommended to test all signals before driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AmeriLite dark black LED tube tail light set is aimed at owners of 1988–1999 Chevy and GMC fullsize C\/K pickup trucks and related SUVs who want a factory-fit LED upgrade with a smoked aesthetic. It suits DIY mechanics, restoration projects, and customizers seeking improved illumination, DOT-compliant performance, and a cohesive left\/right replacement kit that installs without modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tail lights require any wiring modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No wiring changes are needed for standard factory setups—these are direct plug-and-play replacements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights legal for road use in the U.S. and Canada?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the AmeriLite assemblies meet DOT and SAE standards for compliant on-road use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AmeriLite","offers":[{"title":"Default Title","offer_id":67584899088569,"sku":"B08CH278XY","price":352.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/amerilite-front-assembly-pair.jpg?v=1790458264"},{"product_id":"mayello-tacoma-tail-lights-clear-lens-black-direct-fit-2016-2023-with-bulbs-oe-style-plug-play","title":"MAYELLO Tacoma Tail Lights Clear Lens Black — Direct-Fit 2016–2023 with Bulbs, OE-Style Plug \u0026 Play","description":"\u003cp\u003e\u003cstrong\u003eMAYELLO clear-lens black tail lights are direct-fit replacement rear lamps for 2016–2023 Toyota Tacoma trucks, supplied with bulbs for a true plug-and-play swap.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you’re updating the rear look of your Tacoma for a darker, modern appearance without complicated wiring or bodywork, these MAYELLO lamps offer an OE-style fit and finish that matches factory mounting points. They’re designed to work across the Tacoma lineup—Base, SR, SR5, TRD, Sport, Limited and Night Shade trims—so most owners can swap their stock lamps quickly and retain full functionality.\u003c\/p\u003e\n\n\u003ch3\u003eHow simple is installation for these tail lights?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: the lights follow a 1:1 OE-style design and use the factory connectors, so you won’t need cutting, splicing, or extra relays. Typical installations take under an hour with basic tools and a helper for alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play harnesses match factory sockets.\u003c\/li\u003e\n  \u003cli\u003eNo modification to truck body or wiring required.\u003c\/li\u003e\n  \u003cli\u003eAll bulbs included to replace originals immediately.\u003c\/li\u003e\n  \u003cli\u003eMounting points align with factory holes for a direct fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these tail lights fit my specific Tacoma trim and year?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are engineered to fit 2016 through 2023 Toyota Tacoma models across common trims—Base, SR, SR5, TRD, Sport, Limited and Night Shade—so compatibility covers the vast majority of Tacomas from those years. Double-check connector style and mounting orientation against your current units before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility range: 2016–2023 Toyota Tacoma models.\u003c\/li\u003e\n  \u003cli\u003eFits multiple trims including TRD, Limited, Night Shade.\u003c\/li\u003e\n  \u003cli\u003eDesigned to match factory mounting geometry and connector types.\u003c\/li\u003e\n  \u003cli\u003eInspect existing connector and lamp shape to confirm match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the clear lens black finish affect looks and visibility?\u003c\/h3\u003e\n\u003cp\u003eThe combination of a clear outer lens and black\/red internal styling gives the truck a stealthier, more contemporary rear appearance while preserving light output. Because the lens is clear and reflective, the color can appear lighter in bright sunlight—this is a cosmetic effect rather than a functional change in illumination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSleek black internals complement blackout trucks and accessories.\u003c\/li\u003e\n  \u003cli\u003eClear lens retains bright brake and turn signal visibility.\u003c\/li\u003e\n  \u003cli\u003eReflective surface may look lighter in direct sun—normal behavior.\u003c\/li\u003e\n  \u003cli\u003eBulbs included to deliver factory-level light output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about durability and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThese lamps are built to the same mounting and sealing standards as original equipment, helping protect against road spray and weather. Routine cleaning and proper installation will keep seals effective and maintain appearance for years of use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed housings to resist moisture ingress under normal use.\u003c\/li\u003e\n  \u003cli\u003eDurable lens materials for everyday road conditions.\u003c\/li\u003e\n  \u003cli\u003eReplace bulbs with like-for-like types to preserve performance.\u003c\/li\u003e\n  \u003cli\u003eEasily removed for cleaning or bulb service if required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a 2016–2023 Toyota Tacoma and want a direct replacement that upgrades the rear styling without electrical work, these MAYELLO tail lights suit owners seeking a clean blackout look with factory-like fitment. They’re ideal for DIY installers who want a quick plug-and-play swap, as well as pro shops doing an OEM-style exchange while adding a modern aesthetic.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tail lights require splicing or new wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They are plug-and-play with factory-style connectors and require no splicing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included with the tail light assemblies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. All bulbs needed for immediate installation are included with the lights.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"MAYELLO","offers":[{"title":"Default Title","offer_id":67584899121337,"sku":"B0FB3YLNWV","price":186.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/mayello-front-assembly-clear-lens-black-tail-light.jpg?v=1790458263"},{"product_id":"amerilite-led-tube-tail-lights-for-1988-1999-chevy-gmc-c-k-crystal-red-dot-sae-compliant-set","title":"AmeriLite LED Tube Tail Lights for 1988–1999 Chevy\/GMC C\/K — Crystal Red DOT\/SAE Compliant Set","description":"\u003cp\u003e\u003cstrong\u003eThese AmeriLite Crystal Red C-Type LED tube tail lights are a direct-fit replacement set for 1988–1999 Chevy and GMC C\/K full-size pickups and SUVs, delivering brighter, DOT\/SAE-compliant rear lighting with plug-and-play installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a late‑80s to late‑90s Chevy or GMC full‑size pickup, Suburban or Tahoe and need reliable, modernized rear lighting, this aftermarket pair replaces both driver and passenger assemblies without cutting or splicing. Manufactured in Taiwan and built to meet U.S. and Canadian safety standards, the set updates the original incandescent look with crisp LED tubes and a crystal red lens for improved visibility and long service life.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these tail lights improve rear visibility compared to original lamps?\u003c\/h3\u003e\n\u003cp\u003eThe AmeriLite LED tubes light faster and maintain consistent brightness across the lens, improving reaction time and contrast in traffic. LEDs also resist filament failure and vibrations that commonly dim or break incandescent bulbs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstant-on LED illumination for quicker brake signaling\u003c\/li\u003e\n  \u003cli\u003eEven light distribution through crystal red lens\u003c\/li\u003e\n  \u003cli\u003eLower heat and longer lifespan than traditional bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these assemblies fit my 1988–1999 Chevy\/GMC C\/K truck without modifications?\u003c\/h3\u003e\n\u003cp\u003eYes—these tail lights are designed as direct OEM replacements for the specified years and body styles. They arrive as a complete left and right set and reuse your stock mounting points and connectors for a straightforward swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for C\/K full-size pickups and SUVs\u003c\/li\u003e\n  \u003cli\u003eNo cutting, drilling, or wiring alterations required\u003c\/li\u003e\n  \u003cli\u003eIncludes both driver (left) and passenger (right) sides\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights street-legal and built to last?\u003c\/h3\u003e\n\u003cp\u003eAmeriLite assemblies meet or exceed DOT and SAE standards for U.S. and Canadian roads, offering compliance where it matters. Materials and quality control from the Taiwan factory focus on weather resistance and long-term reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDOT \u0026amp; SAE certified for on-road use\u003c\/li\u003e\n  \u003cli\u003eDurable housing and sealed lens to resist moisture\u003c\/li\u003e\n  \u003cli\u003eManufactured with strict QC for consistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and upkeep?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be simple and quick: remove the factory assembly, reconnect the stock harness to the AmeriLite unit, and secure it in place. Routine upkeep is minimal—periodic lens cleaning and connector checks keep them functioning well.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play wiring with original connectors\u003c\/li\u003e\n  \u003cli\u003eUse basic hand tools; typical install time under an hour per side\u003c\/li\u003e\n  \u003cli\u003eLow maintenance; clean lens and inspect seals annually\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Owners of 1988–1999 Chevy and GMC C\/K full‑size pickups, Suburbans, Tahoes, or those restoring and upgrading classic trucks who want DOT\/SAE-compliant, longer-lasting rear lighting with an OEM-fit replacement. If you prefer a straightforward, quality aftermarket solution that improves visibility and preserves factory fitment, this AmeriLite Crystal Red LED tube tail lights set is tailored for your vehicle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tail lights require wiring changes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, they are direct OEM replacements that use your stock connectors—no cutting or splicing needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are they approved for road use in the US and Canada?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the AmeriLite assemblies meet DOT and SAE standards for U.S. and Canadian regulations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AmeriLite","offers":[{"title":"Default Title","offer_id":67584899252409,"sku":"B08GFDNZ6F","price":361.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/amerilite-full-assembly-front.jpg?v=1790458265"},{"product_id":"dna-motoring-dodge-dakota-durango-headlights-pair-smoke-clear-lens-oe-style-fit","title":"DNA MOTORING Dodge Dakota \/ Durango Headlights Pair — Smoke\/Clear Lens, OE-Style Fit","description":"\u003cp\u003e\u003cstrong\u003eThese are a pair of direct-replacement DNA MOTORING headlights with smoke\/clear lenses designed to fit 1997–2004 Dodge Dakota and 1998–2003 Dodge Durango models, sold as driver and passenger side units.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace faded or damaged factory headlights with a plug-and-play pair that restores appearance and beam alignment without vehicle modification. Built with an ABS plastic housing and impact-resistant polycarbonate lens, these headlights match original mounting points and accept your existing bulbs (9007 high\/low beam and 3157A turn signal). They’re ideal for owners who want a crisp, updated look and reliable OE-style fitment for show cars or daily drivers.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my Dodge Dakota or Durango?\u003c\/h3\u003e\n\u003cp\u003eYes — these headlights are engineered for direct bolt-on replacement on compatible model years. They follow the factory mounting configuration and electrical connections so installation requires no cutting or splicing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 1997–2004 Dodge Dakota and 1998–2003 Dodge Durango\u003c\/li\u003e\n  \u003cli\u003eDriver and passenger units included for a matched appearance\u003c\/li\u003e\n  \u003cli\u003eDirect OE-style connectors for plug-and-play installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat bulbs do these headlights use and are they included?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies accept 9007 bulbs for high\/low beam and 3157A bulbs for the turn signals. Bulbs are not included to let you reuse existing lamps or choose upgraded lighting options independently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh\/Low beam socket: 9007 (existing bulbs transferable)\u003c\/li\u003e\n  \u003cli\u003eTurn signal socket: 3157A (not included)\u003c\/li\u003e\n  \u003cli\u003eDesigned to accept standard automotive bulbs—no rewiring required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and clear are these lenses over time?\u003c\/h3\u003e\n\u003cp\u003eThe lenses are made from polycarbonate, a material chosen for impact resistance and optical clarity. The housing uses high-quality ABS plastic to resist heat and vibration, helping the assembly maintain fit and finish under normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePolycarbonate lens resists chips and improves light transmission\u003c\/li\u003e\n  \u003cli\u003eABS housing offers strength and thermal stability\u003c\/li\u003e\n  \u003cli\u003eFinish and mounting designed to limit gaps that trap moisture or debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is the installation, and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for DIYers familiar with basic vehicle maintenance. Because the units are direct replacements, most installs require only common hand tools and follow factory access points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical tools: socket set, screwdrivers, and possibly a panel trim tool\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play electrical connectors—no splicing or special adapters\u003c\/li\u003e\n  \u003cli\u003eComplete set includes both driver and passenger headlights for simultaneous install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These DNA MOTORING headlights are best for Dodge owners seeking a clean, OE-compatible replacement with a smoke\/clear look—whether restoring an older vehicle, upgrading aesthetics for shows, or swapping out worn factory lenses. They suit buyers who want an easy bolt-on upgrade that uses their existing bulbs and preserves original wiring and mount points.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights come with bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, bulbs are not included. They accept 9007 for high\/low beams and 3157A for turn signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are direct bolt-on replacements with OE-style connectors—no wiring changes needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DNA MOTORING","offers":[{"title":"Default Title","offer_id":67584900497593,"sku":"B07D4YCVCV","price":221.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dna-motoring-headlights-front-view.jpg?v=1790458280"},{"product_id":"oklsg-led-fog-lights-for-2024-2026-toyota-tacoma-c-style-smoked-lens-drl-sequential-signals","title":"OKLSG LED Fog Lights for 2024-2026 Toyota Tacoma — C-Style Smoked Lens, DRL \u0026 Sequential Signals","description":"\u003cp\u003e\u003cstrong\u003eOKLSG C-style LED fog lights replace the stock fog lamp assembly on 2024–2026 Toyota Tacoma models to add dynamic DRL, sequential turn signals, and a factory-fit smoked-lens appearance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis OKLSG LED fog light assembly is designed specifically for fourth‑generation Toyota Tacomas from 2024 through 2026. Built to drop into the original bumper fog bezel, it preserves the factory look while adding brighter LEDs, flowing turn animations, and robust weatherproofing. The kit includes all mounting hardware and a clear wiring plan to support a straightforward install without cutting or drilling.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these fog lights fit my 2024–2026 Tacoma?\u003c\/h3\u003e\n\u003cp\u003eThese lights are engineered from 3D scans of the Tacoma bumper so they match the original mounting points and bezel shape. Installation uses the stock fog lamp opening and hardware locations for a seamless OEM appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2024, 2025, 2026 Toyota Tacoma 4th Gen (SR, SR5, TRD Sport, TRD Off-Road, Limited, TRD Pro, Trailhunter)\u003c\/li\u003e\n  \u003cli\u003eDirect replacement — no bumper trimming, drilling, or modification required\u003c\/li\u003e\n  \u003cli\u003eSmoked lens and factory-style contour align with the original fascia\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat lighting features and performance can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe OKLSG assembly combines high-output LED chips for improved forward illumination with integrated daytime running lights and sequential turn signals for modern styling. The LED modules are sealed and rated for demanding conditions so they sustain brightness and reliability over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDynamic DRL with flowing turn-signal animation for a distinctive look day and night\u003c\/li\u003e\n  \u003cli\u003eHigh-output LEDs for stronger front-end visibility versus halogen fog lamps\u003c\/li\u003e\n  \u003cli\u003eRugged ABS housing and IP68-rated waterproofing for harsh environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and vehicle integration?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed for DIY enthusiasts and professional shops alike; wiring is straightforward and the kit includes a step-by-step guide and all necessary fasteners. The lights interface with factory circuits so there are no dashboard errors or battery strain when connected correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnect ground to chassis, yellow to turn signal circuit, red to factory auxiliary or switched fuse\u003c\/li\u003e\n  \u003cli\u003eEstimated 40 minutes for a typical installation with basic tools\u003c\/li\u003e\n  \u003cli\u003eZero error codes — integrates with the original vehicle power system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and warranty provisions are included?\u003c\/h3\u003e\n\u003cp\u003eOKLSG builds the assembly with thermal-management materials and sealed LEDs to minimize heat buildup and prevent flicker. The construction emphasizes long service life and resistance to dust, water, and impact, backed by support from OKLSG.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced heat-dissipating materials to reduce overheating and extend LED life\u003c\/li\u003e\n  \u003cli\u003eShockproof, dustproof construction with IP68 waterproof rating\u003c\/li\u003e\n  \u003cli\u003eEstimated LED lifespan over 10,000 hours and a 1-year support package from OKLSG\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The OKLSG C-style LED fog light kit is intended for Tacoma owners (2024–2026 fourth‑gen) who want a factory-fit visual upgrade with modern DRL and sequential signals, improved front lighting performance, and a reliable, plug‑and‑play installation. It’s a good match for daily drivers who value OEM appearance, off-roaders needing weatherproof lighting, and DIYers who prefer a quick, reversible upgrade without modifying the bumper.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fog lights cause dashboard error codes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The OKLSG kit integrates with the factory power system to prevent warning lights or error messages.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to cut my Tacoma bumper to install these?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No cutting or drilling required—these lights are a direct-fit replacement for the stock fog bezel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OKLSG","offers":[{"title":"Default Title","offer_id":67584900595897,"sku":"B0DD6LC7L6","price":198.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/oklsg-front-assembly-installed-on-tacoma.jpg?v=1790458287"},{"product_id":"vizotae-headlights-for-2007-2013-chevy-silverado-high-low-beam-replacement-uv-coated-weatherproof","title":"Vizotae Headlights for 2007–2013 Chevy Silverado — High\/Low Beam Replacement, UV-Coated Weatherproof","description":"\u003cp\u003e\u003cstrong\u003eVizotae replacement headlights deliver direct-fit high and low beam lighting engineered for 2007–2013 Chevy Silverado trucks, combining OEM-compatible fit, weatherproof sealing, and SAE-compliant optics.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Vizotae headlights are a full high\/low beam replacement designed to match factory mounting points and electrical connections for many 2007–2013 Silverado models and select 2014 HD trucks. Built to resist water intrusion and lens yellowing, they aim to restore original illumination and appearance while keeping installation straightforward for a DIYer or professional technician.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my Silverado and which model years are supported?\u003c\/h3\u003e\n\u003cp\u003eThese units are compatible with specific Silverado configurations—check your submodel and year before purchasing. They list OEM references and part-link numbers to help confirm fitment, but do not fit 2007 classic (old body) models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2007–2013 Silverado 1500 LS and many 1500 Hybrids.\u003c\/li\u003e\n  \u003cli\u003eFits 2007–2013 Silverado 1500\/2500\/3500 HD submodels LT, LTZ, and WT; select 2014 2500\/3500 HD LT\/LTZ\/WT.\u003c\/li\u003e\n  \u003cli\u003eOEM references: 22853027, 22853028; part link GM2502280, GM2503280 for verification.\u003c\/li\u003e\n  \u003cli\u003eOnly includes high-beam and low-beam bulbs; confirm if fog or marker lamps are needed separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these headlights handle weather and long-term durability?\u003c\/h3\u003e\n\u003cp\u003eVizotae headlights are engineered to withstand outdoor conditions by sealing the lens and housing with a specialized PUR adhesive and testing for airtightness. Additionally, the lens receives a UV optical coating to resist yellowing, and the housing includes a breathable film to regulate internal humidity and temperature.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePUR adhesive seam for long-term waterproof performance and full air-tightness checks.\u003c\/li\u003e\n  \u003cli\u003eUV optical coating reduces lens discoloration and preserves clarity over time.\u003c\/li\u003e\n  \u003cli\u003eOne-way breathable film in the base prevents moisture build-up while equalizing pressure.\u003c\/li\u003e\n  \u003cli\u003eConstruction materials selected to meet typical road and weather exposure demands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat level of brightness and compliance can I expect from these lights?\u003c\/h3\u003e\n\u003cp\u003eThe lamps provide strong, evenly distributed illumination for both high and low beam functions while meeting SAE guidelines for headlamp performance. The optical design and coatings are focused on clarity and consistent light output without premature lens degradation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptical design tuned to deliver clear low- and high-beam patterns for improved visibility.\u003c\/li\u003e\n  \u003cli\u003eSAE-compliant output to align with standard road-lighting expectations.\u003c\/li\u003e\n  \u003cli\u003eLens treatment helps maintain consistent light transmission over time.\u003c\/li\u003e\n  \u003cli\u003eFactory-style alignment points for accurate aiming and beam pattern control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what warranty support exists?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward for a professional or a capable DIYer; the units are direct-fit replacements. Vizotae backs these headlights with a three-year workmanship\/usage safeguard and offers simple replacement or refund processing when qualified issues arise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design uses factory mounting points and connectors for quicker install.\u003c\/li\u003e\n  \u003cli\u003eDIY installation guidance available on request—reply \"DIY\" to receive instructions.\u003c\/li\u003e\n  \u003cli\u003eThree-year limited coverage for defects under normal use; claims require order number and photos.\u003c\/li\u003e\n  \u003cli\u003eWarranty card included with the product outlines the full terms and steps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These Vizotae headlight assemblies are aimed at Silverado owners who need a dependable, direct-replacement pair with improved long-term clarity and weather resistance. Choose them if you drive a supported 2007–2013 (or select 2014 HD) Chevy Silverado submodel, want OEM-part references for fitment confirmation, and prefer a product that’s simple to install with backing from a multi-year warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights fit 2007 Chevy Silverado classic models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They are not compatible with 2007 classic (old body) Silverado models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers these Vizotae headlights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They include a three-year coverage for defects; claims require order number and photos.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Vizotae","offers":[{"title":"Default Title","offer_id":67584902725817,"sku":"B0DZXK3JN2","price":298.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vizotae-headlight-front-assembly.jpg?v=1790458396"},{"product_id":"karsparehub-halogen-headlights-for-ford-super-duty-2011-2016-f-250-f-550-oem-fit-preinstalled-bulbs","title":"KarSpareHub Halogen Headlights for Ford Super Duty 2011–2016 (F-250–F-550) — OEM Fit, Preinstalled Bulbs","description":"\u003cstrong\u003eDirect-fit halogen headlight assemblies engineered to replace the factory units on 2011–2016 Ford F-250, F-350, F-450 and F-550 Super Duty trucks.\u003c\/strong\u003e\n\n\u003cp\u003eThese KarSpareHub halogen headlights are built to the original equipment (OEM) specifications and tested for a precise fit with Ford OEM numbers BC3Z13008F and BC3Z13008E. They arrive with bulbs installed and use weatherproof construction and UV-protected lenses to maintain clarity and reliability under road exposure. The assemblies are compatible with the listed Super Duty model years and designed to be either professionally installed or fitted by an experienced DIYer.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my 2012–2016 Super Duty without modification?\u003c\/h3\u003e\n\u003cp\u003eYes — they are modeled to match the factory mounting points and electrical connections for the specified model years. KarSpareHub verifies fitment through comprehensive compatibility testing, so the assemblies align with original mounting tabs and wiring harnesses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM reference numbers: BC3Z13008F and BC3Z13008E for accurate match.\u003c\/li\u003e\n  \u003cli\u003ePre-installed bulbs included — no separate bulb purchase required.\u003c\/li\u003e\n  \u003cli\u003eDesigned to use existing truck headlight brackets and connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these headlights handle weather and long-term exposure?\u003c\/h3\u003e\n\u003cp\u003eEach unit features a sealed housing using a specialized PUR adhesive to create a watertight barrier and prevent moisture intrusion. The base includes a breathable one-way film to equalize pressure and reduce condensation, while a UV optical coating protects the lens from yellowing over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% air-tightness testing during manufacture.\u003c\/li\u003e\n  \u003cli\u003eOne-way breathable film prevents internal fogging without letting water in.\u003c\/li\u003e\n  \u003cli\u003eUV coating resists discoloration and preserves light output clarity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow bright and road-legal are these halogen headlights?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies deliver halogen light output tuned to meet SAE guidelines for on-road use, providing dependable illumination for night driving and poor weather. The reflector and lens geometry are optimized to produce a useful beam pattern while remaining compliant with regulatory requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimized reflector design for effective beam spread and cut-off.\u003c\/li\u003e\n  \u003cli\u003eSAE-compliant output suitable for highway and local driving.\u003c\/li\u003e\n  \u003cli\u003eLens clarity maintained by UV protection for consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these headlights myself and what support is available?\u003c\/h3\u003e\n\u003cp\u003eYes — the assemblies are designed for straightforward installation using factory mounting points and connectors. KarSpareHub can provide step-by-step guidance on request; reply \"DIY\" to get a detailed installation walkthrough for your Super Duty truck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple bolt-on replacement using OEM-style tabs and screws.\u003c\/li\u003e\n  \u003cli\u003eBulbs pre-installed to reduce assembly steps.\u003c\/li\u003e\n  \u003cli\u003eOptional DIY instructions available upon request to guide removal and reinstallation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e These KarSpareHub headlight assemblies are aimed at owners of 2011–2016 Ford F-250, F-350, F-450 and F-550 Super Duty trucks who need a direct-fit replacement with OEM-quality fitment and weather-resistant construction. They suit fleet managers, repair shops, and hands-on owners who want reliable halogen lighting that maintains lens clarity and resists moisture. If you want factory-style performance without modifying wiring or mounting, these assemblies are a practical choice backed by a three-year limited coverage for defects during normal use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The KarSpareHub assemblies come with bulbs already installed for immediate replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What vehicles do these headlights fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit 2011–2016 Ford F-250, F-350, F-450 and F-550 Super Duty models designed to use OEM numbers BC3Z13008F\/E.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KarSpareHub","offers":[{"title":"Default Title","offer_id":67584903184569,"sku":"B0DGKDQLKC","price":452.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/karsparehub-front-assembly-view_61ba8b7d-0795-4476-9ead-a2504c9234ee.jpg?v=1790458422"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/tmh-oval-smoked-lens-front-view.jpg?v=1790612459","url":"https:\/\/redleafauto.ca\/collections\/headlights-tail-lights.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}