{"title":"iJDMTOY","description":"\u003cp\u003eBrowse 27 iJDMTOY products at RedLeaf Auto, including license plate frames \u0026amp; covers, car bulbs and electrical parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"ijdmtoy-led-fog-light-kit-for-gmc-sierra-2007-2013-pair-pre-installed-white-leds-oem-fit","title":"iJDMTOY LED Fog Light Kit for GMC Sierra 2007-2013 — Pair, Pre‑Installed White LEDs, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY LED Fog Light Kit for GMC 2007–2013 Sierra is a direct-replacement fog lamp assembly with pre-installed white LEDs designed to restore and upgrade your truck's fog lighting with OEM fit and improved nighttime visibility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a GMC Sierra from the 2007–2013 model years and want a reliable, plug-and-play fog light solution, this iJDMTOY kit replaces the original fog lamp assemblies with modern LED bulbs and durable materials. Each assembly is built to match OEM dimensions and connectors so installation is straightforward for trucks that came with factory fog lamps. The fixtures combine a clear PMMA lens, polycarbonate housing, and chrome reflector to deliver focused light output while resisting UV degradation and road wear.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit improve nighttime and poor-weather visibility?\u003c\/h3\u003e\n\u003cp\u003eThe iJDMTOY fog lights increase visible illumination near the road surface, which helps you see lane edges and obstacles in fog, mist, or heavy rain without adding glare that reflects back at the driver. The pre-installed white LEDs provide a crisper beam pattern than aged halogen bulbs and stabilize color temperature for consistent sightlines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-installed white LED bulbs for brighter, whiter light\u003c\/li\u003e\n  \u003cli\u003eChrome reflector and clear lens concentrate light forward\u003c\/li\u003e\n  \u003cli\u003eReduced glare compared with scattered or yellowed halogen beams\u003c\/li\u003e\n  \u003cli\u003eBetter lateral road illumination close to the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fog lamps fit my GMC Sierra and are they easy to install?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are made specifically for GMC Sierra models from 2007 through 2013, including 1500, 2500, 3500 and their HD variants. The kit is designed as a direct swap for trucks that already have factory fog lights—no cutting or splicing is required when using the OEM harness and connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact-fit dimensions for 2007–2013 GMC Sierra fog lamp openings\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connections for vehicles with OEM fog harness\u003c\/li\u003e\n  \u003cli\u003eNo trimming, drilling, or wiring modifications needed in most installations\u003c\/li\u003e\n  \u003cli\u003eComes as a complete pair (driver and passenger) with bulbs pre-installed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features ensure durability?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies use a polycarbonate (PC) housing and a PMMA front lens with a protective UV coating to maintain clarity and prevent yellowing over time. Inside, a chrome reflector enhances beam efficiency while the sealed construction keeps moisture and road contaminants out of the lamp cavity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePC housing for impact resistance and long-term durability\u003c\/li\u003e\n  \u003cli\u003ePMMA (acrylic) clear lens with UV protection for gloss retention\u003c\/li\u003e\n  \u003cli\u003eChrome reflector for improved reflectivity and beam control\u003c\/li\u003e\n  \u003cli\u003eSealed assembly minimizes fogging and water intrusion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this kit affect my truck’s appearance or off-road use?\u003c\/h3\u003e\n\u003cp\u003eReplacing factory fog lamps with these iJDMTOY LED assemblies refreshes the front-end look of your Sierra with a modern white glow and crisp lens appearance. The product suits both daily drivers and trucks used off-road; it's built for road durability while offering a style upgrade that complements aftermarket lighting systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-style clear lens and chrome interior for factory-like aesthetics\u003c\/li\u003e\n  \u003cli\u003eWhite LED tone modernizes front-end lighting appearance\u003c\/li\u003e\n  \u003cli\u003eDurable construction recommended for off-road exposure\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement design maintains original vehicle lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This fog light kit is aimed at GMC Sierra owners (2007–2013 models) who want a straightforward, OEM-fit lighting refresh—drivers seeking brighter, whiter fog illumination, a factory-like finish, and a plug-and-play upgrade that avoids complex wiring. It’s appropriate for daily commuters, fleet vehicles, and owners who occasionally take their truck off-road but still want reliable, sealed lighting that resists UV and road damage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these fog lights plug-and-play for my 2010 GMC Sierra?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they are direct-replacement assemblies that plug into the OEM fog lamp harness on 2007–2013 Sierra models with factory fog lights.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the LEDs require extra wiring or relays?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No extra wiring or relays are typically needed for vehicles using the original fog lamp harness; bulbs come pre-installed for simple swap-in installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67586692710585,"sku":"B07X4BKRF9","price":142.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-gmc-sierra-foglights-front-assembly.jpg?v=1790490229"},{"product_id":"ijdmtoy-led-high-mount-third-brake-light-for-ford-f-150-f-250-ranger-maverick-smoked-lens-full-led-brake-cargo-light","title":"iJDMTOY LED High Mount Third Brake Light for Ford F-150\/F-250\/Ranger\/Maverick — Smoked Lens, Full-LED Brake \u0026 Cargo Light","description":"\u003cstrong\u003eThe iJDMTOY LED High Mount Third Brake Light is a full-LED aftermarket roof\/bed-mounted center brake lamp that replaces the factory unit for many Ford pickups to deliver brighter brake, tail, and cargo illumination with a smoked lens finish.\u003c\/strong\u003e\n\n\u003cp\u003eThis direct-fit LED third brake light assembly is designed to upgrade older incandescent or dim OEM center brake lights on supported Ford models. Built with a durable ABS housing, PMMA lens, red brake LEDs and xenon-white cargo\/backup LEDs, it gives a modern look while improving visibility and quickness of the stop lamp response. The smoked lens provides a contemporary aesthetic without sacrificing the required red light output for braking.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ford trucks is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis LED third brake light fits multiple Ford pickup platforms but is not universal—check your model year and existing equipment before purchase. It is intended for specific model-year ranges and does not replace OEM units integrated with a rearview camera or factory LED third brake assemblies on special trims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2015–2020 Ford F-150, 2017 and up F-250 \/ F-350, 2019 and up Ranger, 2022 and up Maverick\u003c\/li\u003e\n  \u003cli\u003eNot compatible with models that have a rearview camera built into the OEM 3rd brake light\u003c\/li\u003e\n  \u003cli\u003eNot a replacement for OEM LED third brake lamps on Raptor, F-250 Platinum\/Limited, and similar high-trim variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this improve visibility and appearance?\u003c\/h3\u003e\n\u003cp\u003eThe iJDMTOY assembly uses bright, fast-responding LEDs for brake and tail functions and xenon-white diodes for bed\/cargo illumination and reverse. LEDs illuminate quicker than incandescent bulbs and produce a sharper, more noticeable red brake signal to following drivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrighter red LED diodes for brake\/tail signals for clearer visibility\u003c\/li\u003e\n  \u003cli\u003eFaster illumination response time compared with incandescent bulbs\u003c\/li\u003e\n  \u003cli\u003eXenon-white LEDs for useful cargo area lighting and reverse support\u003c\/li\u003e\n  \u003cli\u003eSmoked lens and modern profile for a custom, contemporary look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and quality features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe housing is molded ABS plastic combined with a PMMA (acrylic) front lens for optical clarity and impact resistance. The unit is built to withstand typical exterior conditions and provides a long-lasting LED solution compared with older incandescent setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable ABS housing resists road vibration and weather exposure\u003c\/li\u003e\n  \u003cli\u003ePMMA lens for clear light transmission and scratch resistance\u003c\/li\u003e\n  \u003cli\u003eFull-LED circuit reduces maintenance and bulb replacement needs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be simple: this product directly replaces the original rooftop center mount 3rd brake housing on compatible trucks. No cutting or wiring modifications are typically required—just unscrew the OEM unit and swap in the iJDMTOY assembly following basic steps and safety precautions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove existing center brake lamp housing with basic hand tools\u003c\/li\u003e\n  \u003cli\u003eAlign and secure the iJDMTOY assembly in the original mounting points\u003c\/li\u003e\n  \u003cli\u003eConnect factory plug—no splicing required for standard fitments\u003c\/li\u003e\n  \u003cli\u003eConfirm brake, tail, and cargo\/backup lamp functions after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own supported Ford F-150, F-250\/F-350, Ranger, or Maverick models and want a straightforward aftermarket upgrade for a brighter, faster third brake light with a smoked, modern appearance. It’s ideal for truck owners seeking improved visibility, a refreshed rear styling cue, and reliable LED performance without modifying factory wiring or mounting points. If your truck’s OEM 3rd brake includes an integrated rearview camera or is an OEM LED special-trim unit, this product is not the correct replacement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this replace a factory 3rd brake light with a built-in rearview camera?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This unit does not replace OEM third brake lights that have an integrated rearview camera.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to cut or splice wiring to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typically no. For compatible models it plugs into the factory connector and mounts using the original hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67587316416697,"sku":"B07ZHP555R","price":96.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-packaging-third-brake-light.jpg?v=1790505728"},{"product_id":"ijdmtoy-grille-mesh-license-plate-relocator-kit-for-bmw-m2-m3-m4-m5-m6-lower-honeycomb-mount-no-drilling","title":"iJDMTOY Grille Mesh License Plate Relocator Kit for BMW M2\/M3\/M4\/M5\/M6 — Lower Honeycomb Mount, No Drilling","description":"\u003cp\u003e\u003cstrong\u003eThe iJDMTOY Grille Mesh License Plate Relocator Kit moves your front plate into the lower honeycomb grille for a cleaner, sportier BMW look without drilling or bumper removal.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit is engineered for many BMW M and M-package models that feature a diamond-shaped grille mesh. It includes mesh-gap support stubs, a lightweight U-shaped bracket, and the screws needed to mount the plate using existing grille openings. The system repositions the plate lower on the bumper to produce a more aggressive, track-inspired aesthetic while keeping installation reversible and minimally invasive.\u003c\/p\u003e\n\n\u003ch3\u003eHow does installation avoid drilling or permanent changes?\u003c\/h3\u003e\n\u003cp\u003eInstallation uses the existing honeycomb or diamond grille openings and a set of fit-stub supports that grip the mesh pattern. No cutting, drilling, or bumper removal is required for most compatible cars, and the plate can be removed and returned to factory position at any time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses mesh gap support stub brackets to anchor into grille honeycomb\u003c\/li\u003e\n  \u003cli\u003eMounts to lower half of grille to minimize interference with upper sensors\u003c\/li\u003e\n  \u003cli\u003eIncludes screws sized for secure mounting without bumper modification\u003c\/li\u003e\n  \u003cli\u003eTypical install time about 10 minutes with basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with my BMW model and grille design?\u003c\/h3\u003e\n\u003cp\u003eThe kit fits many BMW M-series and M-package vehicles, but it requires a diamond or honeycomb mesh grille pattern. Check your grille visually (refer to the product images) to make sure the stubs can engage the mesh openings before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with M2, M3, M4, M5, M6 and various M-Package models listed\u003c\/li\u003e\n  \u003cli\u003eAlso fits X5M, X6M and other M-style mesh grilles with diamond pattern\u003c\/li\u003e\n  \u003cli\u003eNot compatible with slatted or solid grille inserts that lack mesh gaps\u003c\/li\u003e\n  \u003cli\u003eVerify sensor placement on your bumper to ensure clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this affect sensors and parking features?\u003c\/h3\u003e\n\u003cp\u003eThe designers positioned the bracket to sit in the lower half of the grille to help avoid upper-mounted sensors. If your car has parking or cruise sensors near the intended mount area, you may need to slightly relocate the support stubs to prevent interference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to avoid most upper bumper sensors when mounted low\u003c\/li\u003e\n  \u003cli\u003eIf sensors exist, move stubs slightly to prevent false triggers\u003c\/li\u003e\n  \u003cli\u003eBracket center U-shape may arrive slightly bent but is hand-adjustable\u003c\/li\u003e\n  \u003cli\u003eAlways confirm space between sensors before final installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat visual result should I expect after relocating the plate?\u003c\/h3\u003e\n\u003cp\u003eRelocating the front plate to the lower grille area gives the front fascia a more race-inspired silhouette and uncluttered upper grille. The plate sits lower and centered for a balanced, sportier appearance while keeping the factory bumper intact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates a cleaner upper grille, emphasizing the kidney grille shape\u003c\/li\u003e\n  \u003cli\u003eProduces a low, aggressive stance reminiscent of track setups\u003c\/li\u003e\n  \u003cli\u003eRemovable and reversible—return to stock whenever desired\u003c\/li\u003e\n  \u003cli\u003eMounting hardware finished to resist corrosion for long-term look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Enthusiasts who want a track-ready appearance without permanent mods, owners of BMW M and M-package models with diamond or honeycomb grilles, and anyone who prefers a reversible, no-drill solution to plate placement. This kit is ideal for DIY installers comfortable checking sensor locations and confirming mesh compatibility prior to purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools or drilling to install this?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No drilling is required; basic hand tools are sufficient and installation typically takes about 10 minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this trigger parking sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually no if mounted in the lower grille, but you may need to adjust the stubs slightly to avoid sensors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67587414720697,"sku":"B08R7ZMDV2","price":87.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-bracket-mounted-on-bmw-grille.jpg?v=1790507501"},{"product_id":"ijdmtoy-grille-mesh-license-plate-relocator-kit-for-dodge-jeep-lower-grille-no-drill","title":"iJDMTOY Grille Mesh License Plate Relocator Kit for Dodge \u0026 Jeep — Lower Grille No-Drill","description":"\u003cp\u003e\u003cstrong\u003eThe iJDMTOY Grille Mesh License Plate Relocator Kit lets you move your front plate into the lower grille mesh on compatible Dodge and Jeep models without drilling or removing bumpers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit provides everything needed to secure a front license plate inside the factory lower grille honeycomb, restoring a cleaner front fascia and a sportier look. Designed for vehicles with the diamond-shaped lower grille pattern, the parts are lightweight, use existing mesh gaps for support, and install quickly with common hand tools. A quick-scan QR code in the package links to step-by-step instructions and tips for sensor-aware placement.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this relocator kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is made for Dodge and Jeep models that feature the diamond-shaped lower grille mesh pattern: Challenger (2008+), Charger (2011+), Durango (2011+), and Grand Cherokee (2011+). It relies on the honeycomb openings in those specific bumper bezels to anchor the support stubs and plate bracket.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Dodge Challenger 2008 and newer\u003c\/li\u003e\n  \u003cli\u003eCompatible models: Dodge Charger 2011 and newer\u003c\/li\u003e\n  \u003cli\u003eCompatible models: Dodge Durango 2011 and newer\u003c\/li\u003e\n  \u003cli\u003eCompatible models: Jeep Grand Cherokee 2011 and newer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the kit without drilling or removing the bumper?\u003c\/h3\u003e\n\u003cp\u003eInstallation uses the grille mesh gaps as mounting locations, so no cutting or drilling of the bumper is necessary. The kit includes mesh-fit support stubs, a lightweight U-shaped license plate bracket, and the screws needed; most installs take about 10 minutes with basic tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInsert the mesh support stubs into honeycomb openings for stable anchoring\u003c\/li\u003e\n  \u003cli\u003eAttach the U-shaped plate bracket to the stubs using supplied screws\u003c\/li\u003e\n  \u003cli\u003eNo bumper\/grille removal or permanent modification required\u003c\/li\u003e\n  \u003cli\u003eFollow the included QR-linked manual for step-by-step guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit interfere with parking or cruise control sensors?\u003c\/h3\u003e\n\u003cp\u003eVehicles with proximity sensors may need slight adjustment of the stub positions to avoid false triggers. The instructions note sensor-aware placement and recommend shifting mounting stubs away from sensor locations if necessary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck sensor locations before final tightening\u003c\/li\u003e\n  \u003cli\u003eMove stubs slightly if a sensor activates after mounting\u003c\/li\u003e\n  \u003cli\u003eBracket can be hand-adjusted if its U-shape arrives slightly bent\u003c\/li\u003e\n  \u003cli\u003eQR manual shows examples of sensor-safe placements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat appearance and practical benefits does relocating the plate provide?\u003c\/h3\u003e\n\u003cp\u003eMoving the plate into the lower grille visually cleans up the bumper and gives the front end a lower, more aggressive stance reminiscent of racecars. It also avoids awkward tow-eye plate placements and preserves the factory fascia design.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates a centered, sportier front-end look\u003c\/li\u003e\n  \u003cli\u003ePrevents drilling holes in the bumper for a non-permanent solution\u003c\/li\u003e\n  \u003cli\u003eMaintains factory trim and can be reversed later if desired\u003c\/li\u003e\n  \u003cli\u003eLightweight bracket keeps extra weight off the grille structure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers of Dodge Challenger, Charger, Durango, or Jeep Grand Cherokee models with the diamond-shaped lower mesh who want a no-drill, reversible way to reposition their front license plate for a cleaner, sportier appearance. It’s ideal for DIY installers who prefer quick fits, owners wishing to avoid permanent bumper modifications, and drivers mindful of preserving resale condition while improving front-end aesthetics.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to drill into my bumper to install this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit uses existing lower grille honeycomb gaps to mount the supports without drilling or bumper removal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2013 Dodge Charger?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—fits Dodge Charger 2011 and newer models with the diamond-shaped lower grille mesh.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67587462201529,"sku":"B08H7JVKVR","price":87.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-view-installed-plate.jpg?v=1790508844"},{"product_id":"ijdmtoy-led-turn-signal-driving-light-kit-for-jeep-wrangler-jk-2007-2017-dual-color-drl-and-amber-signals-dark-smoke-lens","title":"iJDMTOY LED Turn Signal \u0026 Driving Light Kit for Jeep Wrangler JK 2007-2017 — Dual-Color DRL and Amber Signals, Dark Smoke Lens","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY's LED Turn Signal\/Driving Light Kit replaces the factory incandescent corner lamps on 2007–2017 Jeep Wrangler JK with a dual-color, full-LED grille-mounted assembly that delivers bright white DRL lighting and amber turning signals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit is a direct-fit LED upgrade designed specifically for Jeep Wrangler JK and JKU models from 2007 through 2017. It swaps in for the original corner lamps and brings a modern, sporty look while offering faster, more visible illumination. Housed in a black-tinted, dark smoke lens with durable ABS construction and a PMMA front shell, the assemblies combine a xenon-white LED halo ring for driving\/running light use and amber dotted LEDs for signaling.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit improve visibility compared to the stock lamps?\u003c\/h3\u003e\n\u003cp\u003eThe full-LED design lights faster and appears brighter than incandescent bulbs, helping other drivers notice your signals and running lights sooner. LEDs also maintain consistent light output in adverse weather and are less likely to dim over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBright xenon-white halo ring for DRL or fog light appearance\u003c\/li\u003e\n  \u003cli\u003ePiercing amber dotted LEDs for clear turn signaling\u003c\/li\u003e\n  \u003cli\u003eImproved response time vs. incandescent bulbs\u003c\/li\u003e\n  \u003cli\u003eDark smoke lens reduces glare while maintaining visibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these plug directly into my 2007–2017 Wrangler without major modifications?\u003c\/h3\u003e\n\u003cp\u003eYes — the assemblies are made for direct swap into the factory corner lamp openings. You unplug the stock connector and plug it into the new LED lamp, then twist-lock the base to seal against moisture.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement for JK and JKU corner lamps\u003c\/li\u003e\n  \u003cli\u003eStock connector compatibility for simple plug-and-play\u003c\/li\u003e\n  \u003cli\u003eTwist-lock base prevents water condensation\u003c\/li\u003e\n  \u003cli\u003eAdditional white-LED wire for DRL\/parking light hookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need extra parts or wiring changes to make these work reliably?\u003c\/h3\u003e\n\u003cp\u003eBecause LEDs draw less current than halogen bulbs, you should fit load resistor decoders to prevent hyperflash or warning errors. The kit includes a supplemental wire for the white LED feature, but resistors or decoders may be required depending on your vehicle's electrical system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall load resistor decoders to prevent hyperflash\/reduced feedback\u003c\/li\u003e\n  \u003cli\u003eConnect additional wire to the front lamp + for white LED DRL\u003c\/li\u003e\n  \u003cli\u003eUse the existing stock socket for primary electrical connection\u003c\/li\u003e\n  \u003cli\u003eSeal twist-lock base after wiring to prevent moisture intrusion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant are these LED assemblies?\u003c\/h3\u003e\n\u003cp\u003eBuilt with an ABS housing and PMMA front shell beneath a dark smoke lens, the lights are designed for automotive use and daily exposure. Proper sealing and correct installation help resist condensation and road exposure, extending long-term performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS plastic housing for impact resistance\u003c\/li\u003e\n  \u003cli\u003ePMMA front shell for clear, scratch-resistant optics\u003c\/li\u003e\n  \u003cli\u003eTwist-lock base reduces water intrusion and condensation\u003c\/li\u003e\n  \u003cli\u003eLEDs tolerate temperature swings better than incandescent bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Jeep owners seeking a plug-and-play visual and safety upgrade for 2007–2017 Wrangler JK \/ JKU models, including enthusiasts who want a sporty dark-smoke aesthetic and faster, brighter signaling. Suitable for DIY installers comfortable with basic wiring and those prepared to add load resistors or decoders to their vehicle electrical system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights direct replacements for all 2007–2017 Jeep Wrangler JK models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are designed as direct-fit replacements for 2007–2017 Wrangler JK and JKU corner lamps, using the factory connector for plug-and-play installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need resistors or decoders to prevent hyperflash?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typically yes—install load resistor decoders because LEDs draw less current than halogens, which can cause hyperflash or dashboard warnings without them.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67587472654521,"sku":"B077NSL6WK","price":96.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-view-grille-mounted-turn-signals.jpg?v=1790509346"},{"product_id":"ijdmtoy-grille-mesh-license-plate-relocator-kit-for-2022-2024-honda-civic-no-drill-10-min-install","title":"iJDMTOY Grille Mesh License Plate Relocator Kit for 2022–2024 Honda Civic — No-Drill, 10-Min Install","description":"\u003cp\u003e\u003cstrong\u003eThe iJDMTOY Grille Mesh License Plate Relocator Kit lets you move your 2022–2024 Honda Civic's front plate into the lower bumper mesh for a cleaner, sportier look—no drilling, no grille removal.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for Gen11 Honda Civic Sedans, Coupes, and Hatchbacks (2022–2024), this complete kit includes mesh-gap support stubs, a lightweight U-shaped bracket, and all necessary fasteners to secure your plate using the factory honeycomb gaps. Installation is straightforward, reversible, and preserves the factory bumper and paint while giving the front end a less obstructed, more aggressive appearance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the kit mount the license plate without drilling?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses purpose-made support stubs that fit into the lower bumper or bezel mesh (honeycomb) openings to hold a lightweight bracket. This method secures the plate using existing grille geometry rather than creating new holes in your bumper.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes mesh-gap opening fit plate support stubs tailored for Civic Gen11 honeycomb patterns\u003c\/li\u003e\n  \u003cli\u003eU-shaped bracket attaches to the stubs and holds most standard license frames\u003c\/li\u003e\n  \u003cli\u003eAll required screws are provided—no specialty tools or bumper removal needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does installation take and do I need professional help?\u003c\/h3\u003e\n\u003cp\u003eMost installations take about 10 minutes and can be completed by a homeowner with basic hand tools. Clear QR-linked instructions are included; professional help is optional if you prefer dealership-level fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical install time: ~10 minutes\u003c\/li\u003e\n  \u003cli\u003eNo bumper or grille removal required—saves time and labor costs\u003c\/li\u003e\n  \u003cli\u003eQR code in the package links to a step-by-step manual and tips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this interfere with parking or cruise control sensors?\u003c\/h3\u003e\n\u003cp\u003eThe relocator is designed to avoid sensors, but if your Civic has parking or cruise-control sensors near the lower grille, you may need to offset the mounting stubs slightly. The kit's adjustable placement allows you to position the bracket clear of sensor zones to prevent false triggers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjust mounting stubs to avoid sensor zones\u003c\/li\u003e\n  \u003cli\u003eIf needed, move stubs a few millimeters to eliminate interference\u003c\/li\u003e\n  \u003cli\u003eBracket shape can be hand-adjusted; slight bending on arrival is normal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the kit include and what fitment should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe package is a full relocation solution made for 2022–2024 Honda Civic models with lower honeycomb mesh. It provides a secure, low-profile plate placement that improves the vehicle's visual stance without permanent alterations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSet of mesh gap support stub brackets sized for Civic Gen11 honeycomb\u003c\/li\u003e\n  \u003cli\u003eLightweight U-shaped license plate bracket mount\u003c\/li\u003e\n  \u003cli\u003eAll necessary screws and fasteners included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The iJDMTOY grille mesh relocator is intended for 2022–2024 Honda Civic owners who want a sleeker front-end look without modifying the bumper: car enthusiasts who prefer a sportier aesthetic, drivers who want a reversible no-drill option, and anyone seeking a quick, inexpensive upgrade that preserves factory parts. Note: if your vehicle has front sensors, follow the included guidance to position the stubs out of sensor range.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will installation damage my bumper?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this kit uses the bumper's existing mesh openings and requires no drilling or bumper removal, preserving factory finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with all 2022–2024 Civic trims?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Gen11 Civic Sedan, Coupe, and Hatchback models with lower honeycomb mesh; confirm your bumper uses the mesh-style grille.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67587594649785,"sku":"B09XX1LG3F","price":87.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-view-installed-honda-civic.jpg?v=1790514256"},{"product_id":"ijdmtoy-tow-hook-license-plate-mount-for-audi-a4-a5-a7-2008-2018-cnc-t6-aluminum-rod-powder-coated-steel-bracket","title":"iJDMTOY Tow Hook License Plate Mount for Audi A4\/A5\/A7 (2008–2018) — CNC T6 Aluminum Rod \u0026 Powder-Coated Steel Bracket","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY's tow hook license plate mounting kit repositions your front plate using a CNC T6 aluminum adapter rod and a heavy-duty powder-coated steel bracket for a secure, off-center look on compatible Audi models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you drive a B8 or later Audi A4\/A5\/A7 family car and want to remove the center-mounted plate without drilling the bumper, this kit offers a bolt-on alternative that uses the factory tow-eye opening. It combines a precision-machined tow rod with a rugged steel plate mount so the license stays solidly fixed while preserving front-end airflow, sensors, and styling lines.\u003c\/p\u003e\n\n\u003ch3\u003eWill this fit my Audi model and year?\u003c\/h3\u003e\n\u003cp\u003eThe iJDMTOY kit was designed to work with specific Audi model ranges and fits the factory tow-eye location. Confirm compatibility with your car's model year before purchase to ensure a secure installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Audi 2008–2018 A4\/S4 (B8), 2008–2018 A5\/S5\/RS5\u003c\/li\u003e\n  \u003cli\u003eAlso fits: 2013–2018 A7\/S7\/RS7 models\u003c\/li\u003e\n  \u003cli\u003eUses the OEM front tow hook opening—no bumper cutting or drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the kit constructed and why does it last?\u003c\/h3\u003e\n\u003cp\u003eThe tow adapter rod is CNC-machined from T6 billet aluminum for precision and strength, while the plate bracket is formed from heavy black powder-coated steel for durability. This combination gives more rigidity and long-term resistance to road wear than lightweight, all-aluminum copycat kits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 billet aluminum adapter rod for accurate fit into tow eye\u003c\/li\u003e\n  \u003cli\u003ePowder-coated steel mounting panel resists corrosion and bends\u003c\/li\u003e\n  \u003cli\u003eIncludes all screws and nuts for a complete bolt-on assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and will it affect sensors or vents?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires no drilling or permanent bumper modifications—just remove the tow hook cover, insert and tighten the adapter rod, attach the steel bracket, and bolt on your plate. The bracket features eight mounting positions and an adjustable angle so you can avoid blocking intakes, parking sensors, or lights.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStep-by-step: remove cover, screw in adapter rod, mount bracket, bolt plate\u003c\/li\u003e\n  \u003cli\u003eEight mount locations to clear vents, sensors, and lighting elements\u003c\/li\u003e\n  \u003cli\u003eAdjustable angle to follow bumper contours and maintain airflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this kit change my car's appearance or add camera support?\u003c\/h3\u003e\n\u003cp\u003eYes—the relocator repositions the plate off-center for a more aggressive, track-inspired front end. The sturdy bracket also offers optional support points for mounting a small front camera or aftermarket accessory without compromising plate stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOff-center placement gives a sportier, cleaner center grille look\u003c\/li\u003e\n  \u003cli\u003eOptional attachment area supports a compact front camera or bracketed accessory\u003c\/li\u003e\n  \u003cli\u003eDesigned to remain secure under normal driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This iJDMTOY tow hook license plate mounting kit is made for Audi owners who want a reliable, no-drill solution to relocate their front license plate—enthusiasts seeking a cleaner grille, drivers who need to avoid center plates for styling or airflow reasons, and anyone who prefers a stronger steel-mounted option over thin aluminum copycats. Verify your model and year for compatibility and use the supplied hardware for a secure installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to drill my bumper to install this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It installs using the factory tow-eye: remove the cover, screw in the adapter, attach the bracket and bolt on the plate.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this block my parking sensors or vents?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—there are eight mounting positions and an adjustable angle so you can avoid sensors, vents, and lights.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67588829348025,"sku":"B00VQWK42A","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-audi-towhook-front-view.jpg?v=1790526125"},{"product_id":"ijdmtoy-front-tow-hook-ring-for-chevy-camaro-gen6-2016-2024-anodized-foldable-aluminum-d-ring-cnc-machined-finish","title":"iJDMTOY Front Tow Hook Ring for Chevy Camaro Gen6 2016-2024 — Anodized Foldable Aluminum D-Ring, CNC-Machined Finish","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY Front Tow Hook Ring is a CNC-machined anodized aluminum foldable D-ring designed to bolt into the Camaro Gen6 tow point for a race-inspired, rust-free styling accent.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis tow hook kit fits 2016–2024 Chevy Camaro models and is built as an eye-catching, lightweight accessory that installs in minutes. Its anodized aluminum rod and glossy foldable O-ring (D-ring) deliver a clean, track-ready look without the corrosion risks of steel hardware. The kit is primarily intended for appearance and display; it is not rated for vehicle recovery.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tow hook change the Camaro's appearance?\u003c\/h3\u003e\n\u003cp\u003eThe tow hook adds a purposeful, motorsport-ready detail to the front bumper opening that complements Camaro styling cues. Its anodized finish and polished ring catch light, giving the front fascia a sleeker, more aggressive presence while remaining compact and unobtrusive when folded.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGlossy anodized aluminum for a durable, high-contrast accent\u003c\/li\u003e\n  \u003cli\u003eFoldable O-ring design sits flush when not displayed\u003c\/li\u003e\n  \u003cli\u003eCNC-machined rod and hardware for a precise, premium look\u003c\/li\u003e\n  \u003cli\u003ePlugs into the factory tow point without bumper modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key materials and build details?\u003c\/h3\u003e\n\u003cp\u003eThe assembly uses CNC-made aluminum for the tow rod and an anodized finish to resist surface wear and maintain its color. The O-ring mechanism folds to reduce drag and avoid scraping, and the kit includes hardware sized for the Camaro’s factory tow-eye opening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight anodized aluminum rod that resists rust\u003c\/li\u003e\n  \u003cli\u003eFoldable aluminum O-ring (D-ring) with glossy finish\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined components for tight fitment\u003c\/li\u003e\n  \u003cli\u003eIncludes lock nut and Hex L-key for secure positioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and takes only minutes with basic tools: remove the bumper tow-cap, screw in the tow rod, mount the O-ring, tighten the nut and use the provided Hex L-key to lock orientation. No cutting or permanent modifications are required, and the hardware is designed to slot into the factory tow point cleanly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove the front bumper tow cover to access the tow eye\u003c\/li\u003e\n  \u003cli\u003eScrew the anodized towbar into the factory tow socket\u003c\/li\u003e\n  \u003cli\u003eAttach the D-ring and tighten the lock nut to set angle\u003c\/li\u003e\n  \u003cli\u003eUse the Hex L-key to prevent unwanted swivel and contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this tow hook be used for towing or recovery?\u003c\/h3\u003e\n\u003cp\u003eThis iJDMTOY hook is engineered for style and display rather than heavy-duty recovery. It provides a realistic racing look and functions as a visual accent, but it should not be relied upon for vehicle recovery or hauling loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned primarily for aesthetics and track-inspired styling\u003c\/li\u003e\n  \u003cli\u003eNot rated or certified for towing or vehicle recovery\u003c\/li\u003e\n  \u003cli\u003eSuitable for show, photoshoots, and light display use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The iJDMTOY Front Tow Hook Ring is ideal for Chevy Camaro Gen6 owners (2016–2024) who want a durable, rust-resistant racing accent that’s quick to install and visually striking. It’s a great match for enthusiasts updating exterior details, show-car builders, or anyone aiming for a sportier front-end appearance without permanent bumper changes. Note: if you need a certified recovery point, choose a purpose-built, load-rated towing solution instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2018 Camaro?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this iJDMTOY tow hook is made to fit 2016–2024 Chevy Camaro Gen6 factory tow points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the hook suitable for towing a disabled vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — this product is for appearance and display and is not rated for vehicle recovery or heavy towing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67589562794169,"sku":"B078KT6CNC","price":71.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-tow-hook-ring-front-view.jpg?v=1790530828"},{"product_id":"ijdmtoy-led-fender-emblem-glow-kit-for-2017-2022-ford-f-250-f-350-f-450-plug-in-ip65-edge-glow","title":"iJDMTOY LED Fender Emblem Glow Kit for 2017-2022 Ford F-250\/F-350\/F-450 — plug-in IP65 edge glow","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY's LED Fender Emblem Glow Kit is a plug-in accent light that fits inside the vertical F-Series Super Duty fender emblem to produce a bright, low-profile glow for 2017–2022 Ford F-250\/F-350\/F-450 trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBring a modern, attention-grabbing accent to your Super Duty’s side emblems without modifying the original badge. This kit uses a slim, treated printed circuit board with two high-output SMD LEDs positioned to illuminate the vertical F250\/F350\/F450\/F550 letters from within the emblem housing. Designed for exterior use and engineered for a near-seamless fit, the lighting strip tucks into the emblem edge and routes power discreetly to the front light circuit for a clean installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the iJDMTOY kit fit into my F-Series emblem?\u003c\/h3\u003e\n\n\u003cp\u003eThe LED board is dimensioned to slide into the inner edge of the Super Duty fender emblem assembly so the LEDs face the vertical letters and create even edge illumination. No emblem modification is required when installed correctly, and the wiring is routed through the grille gap to reach the front power source.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEngineered to nest inside the emblem edge for hidden placement\u003c\/li\u003e\n  \u003cli\u003eTwo 18-SMD LEDs provide strong side\/edge glow\u003c\/li\u003e\n  \u003cli\u003eWires pass through existing grille gaps—no drilling recommended\u003c\/li\u003e\n  \u003cli\u003eCompatible positioning for 2017–2022 F-250, F-350, F-450, F-550\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the LED board weatherproof and durable enough for exterior use?\u003c\/h3\u003e\n\n\u003cp\u003eThe PCB receives an IP65 water-resistant treatment to protect circuitry from moisture and road grime, so it stands up to exterior conditions when installed following the instructions. Note that the LED diodes themselves remain exposed, so careful handling and correct placement reduce the risk of damage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP65-treated PCB for splash and dust resistance\u003c\/li\u003e\n  \u003cli\u003eAvoid bending the strip or pressing directly on LEDs\u003c\/li\u003e\n  \u003cli\u003eDesigned for constant exterior exposure when mounted properly\u003c\/li\u003e\n  \u003cli\u003eFollow orientation guidance to maintain water resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does installation involve and what tools or steps are recommended?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable with light automotive wiring and adhesive mounting. Clean the emblem interior, insert the strip with the wire end toward the emblem top, route the cable through the grille gap, remove the adhesive backing, and press firmly to bond. A short hold time ensures adhesion before routing wires to the front light power connection.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThoroughly clean emblem interior for secure adhesive bond\u003c\/li\u003e\n  \u003cli\u003eAlign board with wire side at emblem top facing inward\u003c\/li\u003e\n  \u003cli\u003eInsert wires through grille gap and connect to front light power\u003c\/li\u003e\n  \u003cli\u003ePress and hold adhesive for two minutes to ensure proper bonding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat visual effect and practical benefits can I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe lighting creates a crisp edge glow that highlights the vertical F-Series letters, giving a contemporary look and improving side visibility at night. It’s an accent upgrade that draws attention without changing the emblem’s original appearance or requiring major bodywork.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBright, consistent illumination of the F250\/F350\/F450 letters\u003c\/li\u003e\n  \u003cli\u003eLow-profile, factory-like appearance from a distance\u003c\/li\u003e\n  \u003cli\u003eEnhances nighttime side visibility and curb appeal\u003c\/li\u003e\n  \u003cli\u003eNon-invasive installation preserves original emblem hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The iJDMTOY LED Fender Emblem Glow Kit suits Ford Super Duty owners (2017–2022 F-250\/F-350\/F-450\/F-550) who want a subtle but striking lighting upgrade that preserves original emblems. It’s ideal for DIYers comfortable with simple wiring and adhesive mounting who prefer a professional-looking accent that improves nighttime presence without permanent badge modification. If you need extensive weatherproofing over exposed diodes or professional installation, consider consulting an installer before fitting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2019 Ford F-350?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is designed to fit 2017–2022 Ford F-250, F-350, F-450, and F-550 Super Duty emblems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the LEDs waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The PCB is IP65 treated for water resistance, but the LED diodes are exposed, so avoid pressing or over-bending them.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67590451560633,"sku":"B07M5B1D1M","price":77.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-fender-emblem-front-view.jpg?v=1790534688"},{"product_id":"ijdmtoy-led-angel-eye-ring-marker-bulbs-for-bmw-white-7000k-5w-with-can-bus-decoder","title":"iJDMTOY LED Angel Eye Ring Marker Bulbs for BMW — White 7000K, 5W with CAN-bus Decoder","description":"\u003cp\u003e\u003cstrong\u003eThese iJDMTOY white 5W LED angel eye ring marker bulbs are direct replacements that restore bright, crisp halo rings on compatible BMW front lamps while including a built-in CAN-bus decoder for error-free operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade faded or yellowed factory halo bulbs with a modern, high‑color-temperature LED solution designed for many BMW 1, 5, 6, 7 Series and X3\/X5 models. Each pair is engineered to power the acrylic halo ring inside projector-style front lamps so the signature circular DRL\/marker effect appears vivid and daytime-visible. The aluminum base and 7000K LEDs deliver a clean white look that complements updated styling without modifying the headlight housing.\u003c\/p\u003e\n\n\u003ch3\u003eWill these bulbs fit my BMW model?\u003c\/h3\u003e\n\u003cp\u003eThey replace the small ring marker bulbs used in many BMW projector headlights from early-2000s models. Confirm your vehicle has the halo ring inside the front low-beam projector and check your owner’s model codes against compatibility lists before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with select BMW: E39, E53, E60, E63, E64, E65, E66, E83, E87 (see full spec list in product details)\u003c\/li\u003e\n  \u003cli\u003eDesigned for projector low-beam trims that house the acrylic halo tube\u003c\/li\u003e\n  \u003cli\u003eNot intended as a replacement for main headlight bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the iJDMTOY angel eye bulbs?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for DIYers familiar with basic lamp access. Remove the cap above the front lamp high beam to reach the ring marker bulb, then swap in the new LED unit and reseal the cap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo cutting or splicing required—plug-and-play fitment in compatible housings\u003c\/li\u003e\n  \u003cli\u003eReplaces the small ring lamp socket; keep gloves to avoid fingerprints on LEDs\u003c\/li\u003e\n  \u003cli\u003eEnsure the housing matches projector-style halos for proper light distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and features should I expect?\u003c\/h3\u003e\n\u003cp\u003eEach bulb delivers 5W of power at about 7000K color temperature for a bright white halo appearance. The aluminum base helps manage heat while the integrated CAN-bus decoder prevents dashboard error codes on compatible BMW electrical systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5W high-power LED per bulb for a vivid halo ring\u003c\/li\u003e\n  \u003cli\u003e7000K bright white color that modernizes the front-end look\u003c\/li\u003e\n  \u003cli\u003eBuilt-in CAN-bus error-free decoder to reduce false warnings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These LED angel eye ring marker bulbs are ideal for BMW owners who want to replace dim, yellowed halo bulbs with a crisp white LED accent—without replacing the entire headlamp. They suit DIY enthusiasts and professional installers working on early-2000s BMW 1\/5\/6\/7 Series and X3\/X5 models that use projector-style halos and who want an easy, plug-and-play upgrade to refresh the vehicle’s front-end styling.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs plug-and-play for my BMW?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your BMW has projector-style halo rings, these replace the stock ring marker bulbs without splicing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will they trigger dashboard errors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Unlikely—each bulb includes a built-in CAN-bus decoder designed to prevent common error messages.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67590676381881,"sku":"B00XM1078O","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-packaging-bulbs.jpg?v=1790535557"},{"product_id":"ijdmtoy-side-marker-light-housings-for-mini-cooper-r60-r61-countryman-paceman-frosted-clear-oem-fit-abs-pmma","title":"iJDMTOY Side Marker Light Housings for MINI Cooper R60\/R61 Countryman Paceman — Frosted Clear OEM-fit ABS\/PMMA","description":"\u003cp\u003e\u003cstrong\u003eReplace your MINI Cooper R60 Countryman side marker lights with direct-fit iJDMTOY frosted clear housings for a cleaner, modern look and OEM-grade fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese iJDMTOY fender side marker light housings are designed specifically for MINI Cooper model R60 Countryman (2011–2016) and R61 Paceman (2013–2016). They swap in place of the factory amber or red reflectors and use durable ABS housings with PMMA lenses finished in frosted clear for improved reflectivity and a contemporary appearance. Built to meet OEM specifications, they offer a cost-effective replacement or upgrade without permanent modification to the vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eWill these side marker housings fit my MINI Cooper Countryman?\u003c\/h3\u003e\n\n\u003cp\u003eYes — these housings are engineered to be direct-fit replacements for the specified MINI models, matching OEM mounting points and dimensions. They replace original part numbers 63-13-9-802-569, 63-13-9-802-570, 63-13-9-802-567, and 63-13-9-802-568.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible models: MINI Cooper R60 (2011–2016) Countryman and R61 (2013–2016) Paceman\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for listed OEM part numbers\u003c\/li\u003e\n  \u003cli\u003eNo cutting or permanent body changes required\u003c\/li\u003e\n  \u003cli\u003eMounts using existing fasteners, clips, or screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic exterior car work and takes under an hour for both sides. Remove the factory marker, disconnect the bulb or twist-out lamp base, swap in the iJDMTOY housing, and reassemble following reverse steps.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTools: flat screwdriver or trim tool, socket or Phillips if fasteners are used\u003c\/li\u003e\n  \u003cli\u003eSteps: remove OEM marker, unlock bulb base, install new housing, reinstall fasteners\u003c\/li\u003e\n  \u003cli\u003eNo wiring or soldering required for standard bulb setups\u003c\/li\u003e\n  \u003cli\u003eRefer to vehicle manual for bumper or wheel-arch access if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish will I get, and how does it hold up?\u003c\/h3\u003e\n\n\u003cp\u003eThese side marker housings combine an ABS plastic body with a PMMA (acrylic) lens, coated with UV protection for long-term gloss and color stability. The frosted clear lens offers enhanced reflectivity and a refined aesthetic compared to US-market amber markers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHousing: impact-resistant ABS for structural strength\u003c\/li\u003e\n  \u003cli\u003eLens: PMMA acrylic with UV-resistant coating to reduce yellowing\u003c\/li\u003e\n  \u003cli\u003eFinish: frosted clear for a sleek, modern look and improved reflectivity\u003c\/li\u003e\n  \u003cli\u003eQuality: manufactured to OEM dimensions and fit standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these side markers a good option for repair or visual upgrade?\u003c\/h3\u003e\n\n\u003cp\u003eThey serve well as both an affordable repair part and a cosmetic upgrade when you want a cleaner, updated appearance. Because they follow OEM fitment and use factory mounting points, they’re suitable for restoration, customization, or replacement after damage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCost-effective alternative to dealer replacement parts\u003c\/li\u003e\n  \u003cli\u003eModernizes front bumper appearance without modifying wiring\u003c\/li\u003e\n  \u003cli\u003eIdeal for restorations, aftermarket custom builds, or post-accident repair\u003c\/li\u003e\n  \u003cli\u003eSold as a complete set to replace both left and right markers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a MINI Cooper R60 Countryman (2011–2016) or R61 Paceman (2013–2016) and need a reliable replacement for faded or damaged side markers — or you want to refresh the exterior styling with a cleaner, frosted clear look — these iJDMTOY housings are built to match OEM fit and finish while saving you the dealership premium. They’re suited to DIY installers, independent mechanics, and enthusiasts seeking a tidy, OEM-compatible upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these replace OEM part numbers for my MINI Countryman?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They replace OEM parts 63-13-9-802-569\/570 and 63-13-9-802-567\/568 for compatible models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need to rewire anything during installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No rewiring is required for standard bulb setups; they use the existing bulb base and connectors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67590714327225,"sku":"B082WN17NN","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-packaging-mini-r60-side-marker.jpg?v=1790536512"},{"product_id":"ijdmtoy-rear-bumper-reflector-lenses-for-dodge-challenger-2015-2023-dark-smoke-oem-fit","title":"iJDMTOY Rear Bumper Reflector Lenses for Dodge Challenger 2015-2023 — Dark Smoke, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eThese iJDMTOY rear bumper reflector lenses are direct-fit dark-smoke replacements engineered to swap in for OEM rear reflex assemblies on Dodge Challengers from 2015 through 2023.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Challenger has cracked, faded, or missing rear bumper reflectors—or you simply want a darker, more aggressive look—this complete set offers a durable, OEM-compatible alternative at a lower cost than dealer parts. Each assembly pairs a PMMA front lens with an ABS housing and a UV-resistant coating for lasting gloss, stronger reflectivity, and reliable fitment. The assemblies are crafted to meet factory specifications and replace part numbers 68211188 and 68211189, making them a straightforward option for repair, restoration, or visual upgrades.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these reflectors fit my Dodge Challenger?\u003c\/h3\u003e\n\u003cp\u003eThese reflectors are built to match factory mounting points and dimensions for Challengers produced between 2015 and 2023. They replace the original reflex housings without needing modifications in most cases, giving a direct swap that aligns with OEM attachment locations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2015–2023 Dodge Challenger models\u003c\/li\u003e\n  \u003cli\u003eDesigned to replace OEM part numbers 68211188 and 68211189\u003c\/li\u003e\n  \u003cli\u003eFactory-style mounting and contours for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes are used, and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eEach assembly combines a PMMA (acrylic) front lens with an ABS plastic housing. The PMMA lens provides clear, resilient optics while the ABS housing resists impact and weather; a UV-resistant surface coating preserves color depth and gloss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePMMA lens for sharp reflectivity and scratch resistance\u003c\/li\u003e\n  \u003cli\u003eABS housing for structural durability and heat tolerance\u003c\/li\u003e\n  \u003cli\u003eUV coating to reduce fading and maintain glossy appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a direct replacement but may require extra access because of the Challenger's large dual exhaust outlets. For easier, safer handling we strongly recommend removing the rear bumper to gain adequate hand space and avoid damaging trim or exhaust components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended: remove rear bumper for full access and comfortable installation\u003c\/li\u003e\n  \u003cli\u003eComes as a complete left-and-right set—no trimming required\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools are sufficient; moderate mechanical experience helps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose these aftermarket reflectors over OEM dealer parts?\u003c\/h3\u003e\n\u003cp\u003eThese iJDMTOY assemblies meet OEM specifications while offering significant cost savings. You get comparable fit and finish without dealer pricing, plus a darker, sportier aesthetic thanks to the smoke lens finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-compatible performance at a lower price point\u003c\/li\u003e\n  \u003cli\u003eSporty dark-smoke appearance for an upgraded look\u003c\/li\u003e\n  \u003cli\u003eDurable materials and UV protection for long-term value\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own a 2015–2023 Dodge Challenger and need an accurate, durable replacement for damaged or missing rear bumper reflectors—or owners wanting a darker, more aggressive rear styling without sacrificing fit or function. Ideal for DIY installers, body shops, and anyone looking to restore or refresh the rear profile of their Challenger affordably.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these reflectors fit my 2020 Dodge Challenger?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they're compatible with Dodge Challenger models from 2015 through 2023 and replace OEM parts 68211188 and 68211189.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to remove the bumper to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Removing the rear bumper is recommended to provide sufficient space around the large dual exhausts for safe, correct installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67591366901945,"sku":"B08SQ55C4M","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-challenger-reflector-front-view.jpg?v=1790548839"},{"product_id":"ijdmtoy-tow-hook-license-plate-relocator-for-bmw-1-3-5-series-x5-x6-cnc-t6-aluminum-adapter-powder-coated-steel-bracket","title":"iJDMTOY Tow Hook License Plate Relocator for BMW 1\/3\/5 Series \u0026 X5\/X6 — CNC T6 Aluminum Adapter, Powder-Coated Steel Bracket","description":"\u003cstrong\u003eiJDMTOY Tow Hook License Plate Mounting Kit repositions your BMW’s front plate securely using a CNC T6 aluminum tow-rod adapter and heavy-duty powder-coated steel bracket without drilling.\u003c\/strong\u003e\n\nThis tow hook license plate relocator is designed for BMW models including 128i, 135i, 1M, E90\/E92 325i\/330i\/335i\/M3, E39 525i\/530i\/540i\/550i\/M5, E70 X5 and E71 X6. The kit pairs a precision-machined T6 billet aluminum adapter that threads into the factory tow eye with an adjustable, multi-mount powder-coated steel plate so you can shift the plate off-center while preserving sensors, vents and styling lines. Installation uses factory mounting points only, so no drilling or bumper modifications are required.\n\n\u003ch3\u003eHow does the kit install without modifying the bumper?\u003c\/h3\u003e\n\u003cp\u003eInstallation leverages the car’s existing tow eye and factory hardware—nothing has to be cut or drilled. The adapter threads into the tow eye, the steel bracket mounts to the adapter, then your license plate attaches to the bracket.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove factory tow hook cover cap to access tow eye\u003c\/li\u003e\n  \u003cli\u003eThread CNC T6 aluminum adapter securely into tow receiver\u003c\/li\u003e\n  \u003cli\u003eAttach adjustable powder-coated steel bracket and fasten plate\u003c\/li\u003e\n  \u003cli\u003eNo drilling, trimming, or permanent bumper alterations required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this block sensors, vents, or headlights?\u003c\/h3\u003e\n\u003cp\u003eiJDMTOY designed the relocator with eight mounting locations and an adjustable angle so you can position the plate where it won’t interfere with front sensors, intake vents, or lighting elements. The multiple holes let you fine-tune placement to fit each model’s bumper curvature.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEight mounting points for flexible plate placement\u003c\/li\u003e\n  \u003cli\u003eAdjustable angle to follow bumper lines and avoid obstructions\u003c\/li\u003e\n  \u003cli\u003eMounting options preserve parking sensors and ventilation gaps\u003c\/li\u003e\n  \u003cli\u003eRepositions plate off-center for an aggressive look without blocking functions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and parts are included for strength and durability?\u003c\/h3\u003e\n\u003cp\u003eThe kit combines a CNC-machined T6 billet aluminum tow-rod adapter with a heavy-duty black powder-coated steel mounting plate and stainless fasteners. This blend gives corrosion resistance and structural strength superior to lightweight aluminum-only copies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 billet aluminum adapter for precise fit and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003ePowder-coated steel bracket for robust, long-term durability\u003c\/li\u003e\n  \u003cli\u003eComes with screws, nuts and hardware required for assembly\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand road exposure and repeated installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I still mount a front camera or get a specific look?\u003c\/h3\u003e\n\u003cp\u003eThe relocator provides optional support for a small front camera and intentionally repositions the plate for a sportier, off-center aesthetic. The bracket’s multiple attachment points let you configure the plate to suit either visibility or style preferences.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptional camera-mounting capability on the bracket\u003c\/li\u003e\n  \u003cli\u003eOff-center position creates aggressive visual stance\u003c\/li\u003e\n  \u003cli\u003eAdjustable placement balances appearance and sensor visibility\u003c\/li\u003e\n  \u003cli\u003eFits many BMW model years listed without bumper alterations\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for? If you drive a compatible BMW and want a secure, factory-friendly way to move your front license plate for improved style or better sensor clearance, the iJDMTOY tow hook relocator gives a durable, reversible solution. It’s aimed at owners who prefer no-drill installs, need a strong bracket for road use, or want the option to add a small front camera while keeping vents and lights unobstructed.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require drilling my bumper?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this kit uses the factory tow eye and bolts on without drilling or cutting the bumper.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which BMW models does this relocator fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits many BMW 1\/3\/5 Series and X5\/X6 models including 08–12 128i\/135i, 06–13 E90\/E92, 95–03 E39, 07–13 E70 X5, 08–14 E71 X6.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67591528743097,"sku":"B00O5MVIXM","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-view-mounted-on-bmw-bumper.jpg?v=1790554375"},{"product_id":"ijdmtoy-led-license-plate-lights-for-ram-promaster-1500-2500-3500-2014-xenon-white-can-bus-error-free","title":"iJDMTOY LED License Plate Lights for RAM ProMaster 1500\/2500\/3500 (2014+) — Xenon White, CAN-bus Error-Free","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY Full LED License Plate Lights are direct-fit, CAN-bus-compatible LED assemblies designed to replace the factory license plate lamps on Dodge RAM ProMaster 1500\/2500\/3500 models (2014 and up) for a much brighter, whiter illumination.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSwap the dim, warm incandescent or OEM warm-white bulbs in your ProMaster for a modern LED assembly engineered to match the original housing footprint while delivering a clean xenon-white beam. These assemblies include built-in CAN-bus error-free decoders to prevent dashboard bulb-out warnings, and they provide broader, more even light across the license plate for improved visibility and a contemporary look.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter and whiter will my license plate be?\u003c\/h3\u003e\n\u003cp\u003eThe iJDMTOY LED assemblies produce substantially more light than standard incandescent or warm OEM bulbs, offering a crisp xenon-white output that reduces yellowish tones. Expect a clearer, more uniform spread of light that makes the plate easier to read at night.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTriple the perceived brightness versus most incandescent replacements\u003c\/li\u003e\n  \u003cli\u003eCool xenon-white color temperature for higher contrast\u003c\/li\u003e\n  \u003cli\u003eEven illumination across the entire plate with fewer hot spots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these LED lights trigger a bulb-out warning on my ProMaster?\u003c\/h3\u003e\n\u003cp\u003eNo—each assembly includes a CAN-bus compatible, error-free decoder built into the lamp so your vehicle recognizes the LED as a proper load. That prevents false bulb-failure warnings without additional resistors or external decoders.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in CAN-bus error-free decoder included\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play direct fit—no extra wiring required\u003c\/li\u003e\n  \u003cli\u003eDesigned for factory electrical systems on 2014+ ProMaster 1500\/2500\/3500\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is the installation and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and intended to be a direct replacement of the OEM license plate lamp assembly. Basic tools and a few simple steps are all that's required, with no cutting or permanent modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a flat-head screwdriver or small pry tool to remove the OEM lamp cover\u003c\/li\u003e\n  \u003cli\u003eRemove the factory C5W bulb from the housing and unplug the connector\u003c\/li\u003e\n  \u003cli\u003eInstall the iJDMTOY LED assembly into the existing housing and snap the cover back in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this product compatible with all ProMaster variants?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies are specifically made for Dodge RAM ProMaster 1500, 2500, and 3500 vans from model year 2014 and later. They are not compatible with the smaller Promaster City model.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: ProMaster 1500, 2500, 3500 (2014 and up)\u003c\/li\u003e\n  \u003cli\u003eNot compatible: Promaster City\u003c\/li\u003e\n  \u003cli\u003eDirect fit design preserves factory mounting points and appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The iJDMTOY Full LED License Plate Lights are ideal for ProMaster owners who want a clean, modern upgrade to their vehicle’s lighting without splicing wires or adding bulky resistors. Fleet managers, commercial van owners, and individual drivers seeking improved nighttime readability and a sleeker rear appearance will appreciate the plug-and-play fit, built-in CAN-bus compatibility, and the enhanced xenon-white output. If you own a 2014-or-later ProMaster 1500\/2500\/3500 and want a simple, durable lighting upgrade that avoids dashboard warnings, these LED assemblies are a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these LEDs cause a bulb-out error on my ProMaster?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The assemblies include built-in CAN-bus decoders to prevent bulb-out warnings on 2014+ ProMaster 1500\/2500\/3500 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools or wiring to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special wiring—use a flat-head screwdriver or pry tool to remove the cover, swap the bulb, and install the LED assembly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67591586742457,"sku":"B0FXYZQFXQ","price":62.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-assembly-pro-master-license-plate-light.jpg?v=1790555752"},{"product_id":"ijdmtoy-tow-hook-license-plate-mounting-kit-for-bmw-3-4-5-series-e84-x1-black-steel-bracket-cnc-t6-aluminum-adapter","title":"iJDMTOY Tow Hook License Plate Mounting Kit for BMW 3\/4\/5 Series \u0026 E84 X1 — Black Steel Bracket, CNC T6 Aluminum Adapter","description":"\u003cp\u003e\u003cstrong\u003eThe iJDMTOY Tow Hook License Plate Mounting Kit repositions your BMW's front plate using a CNC T6 billet aluminum tow adapter and a heavy-duty black powder-coated steel bracket for a durable, track-ready look without drilling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis tow hook plate relocator is engineered for several BMW models to move the license plate off-center and create a more aggressive front-end appearance while preserving intake vents, sensors, and lighting. The kit combines a precision-machined aluminum adapter that threads into the factory tow eye with a robust steel mounting panel that offers multiple angle and position options. Installation is reversible and bolt-on—no cutting, drilling, or permanent alterations to the bumper are necessary.\u003c\/p\u003e\n\n\u003ch3\u003eWill this fit my BMW model?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed specifically for a range of BMW 3, 4 and 5 Series generations and the E84 X1. Check compatibility before ordering to ensure your vehicle year and chassis match the listed fitment. Fitment relies on the standard front tow eye location used across these models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: 2012–2018 F30 Sedan \/ F31 Wagon 3 Series\u003c\/li\u003e\n  \u003cli\u003eAlso fits 2014–2020 F32, F33, F36 4 Series\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2011–2016 F10, F11 and G30, G31 5 Series\u003c\/li\u003e\n  \u003cli\u003eIncluded fitment for 2013–2015 E84 X1\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and adjustable is the relocation bracket?\u003c\/h3\u003e\n\u003cp\u003eInstead of thin alloy often used by other sellers, iJDMTOY uses heavy-duty steel with a black powder coat for increased strength and corrosion resistance. The plate panel features eight mounting locations and an adjustable angle so you can tilt it to follow the bumper contour and avoid obstructing vents, sensors, or lights.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel mounting panel with black powder-coated finish for longevity\u003c\/li\u003e\n  \u003cli\u003eEight mount positions for lateral and vertical adjustment\u003c\/li\u003e\n  \u003cli\u003eAdjustable tilt to keep intake vents and sensors clear\u003c\/li\u003e\n  \u003cli\u003eOptional provision for attaching a front camera\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and will it damage my bumper?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and reversible—no drilling, cutting, or permanent bumper modification is required. The adapter rod threads into the factory tow eye after removing the tow hook cover, then the steel bracket bolts onto the rod to hold your license plate in place.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple four-step process: remove tow cover, thread adapter, attach bracket, bolt on plate\u003c\/li\u003e\n  \u003cli\u003eNo special tools beyond common hand tools required\u003c\/li\u003e\n  \u003cli\u003eReversible design preserves the factory tow point and bumper\u003c\/li\u003e\n  \u003cli\u003eIncludes screws and nuts for secure mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat aesthetic or functional benefits does the kit provide?\u003c\/h3\u003e\n\u003cp\u003eBeyond visual impact, the relocator frees up center bumper space for grille airflow, intercoolers, or aftermarket accessories and can reduce interruption to factory sensors. The off-center placement gives the front end a sportier, track-inspired look while keeping the plate solidly mounted and aligned.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates an aggressive, off-center plate appearance\u003c\/li\u003e\n  \u003cli\u003eMaintains airflow to intakes and coolers by avoiding center obstruction\u003c\/li\u003e\n  \u003cli\u003ePrevents interference with parking sensors and lights when adjusted properly\u003c\/li\u003e\n  \u003cli\u003eSupports optional camera attachment for front-facing video\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The iJDMTOY Tow Hook License Plate Mounting Kit is ideal for BMW owners who want a sturdy, reversible plate relocation that looks purposeful and performs reliably—enthusiasts who track their cars, drivers installing front-mount accessories, or anyone seeking a sportier front-end appearance without permanent bumper modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to drill holes to install this plate relocator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No drilling is required; the adapter threads into the factory tow eye and the bracket bolts on using supplied hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I still use the front tow hook after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The tow point remains functional and the adapter installs into the OEM tow eye without permanent modifications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67591678230713,"sku":"B00TQ0S7QE","price":69.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-bracket-mounted-on-bmw.jpg?v=1790557390"},{"product_id":"ijdmtoy-tow-hook-license-plate-relocator-for-infiniti-nissan-black-powder-coated-steel-t6-billet-aluminum-adapter","title":"iJDMTOY Tow Hook License Plate Relocator for Infiniti \u0026 Nissan — Black Powder-Coated Steel, T6 Billet Aluminum Adapter","description":"\u003cp\u003e\u003cstrong\u003eThe iJDMTOY Tow Hook License Plate Mounting Kit repositions your front plate using a CNC aluminum tow-rod and a heavy-duty powder-coated steel bracket for a secure, off-center, drill-free installation on select Infiniti and Nissan models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit is engineered to move the license plate away from the factory center location and mount it to the vehicle’s front tow-eye without drilling or trimming. It combines a precision-machined T6 billet aluminum adapter that threads into the factory tow hook opening with an eight-position steel mounting panel that resists corrosion and follows bumper contours. The result is a purposeful, aggressive look while preserving airflow, sensors, and factory hardware on compatible Infiniti and Nissan models.\u003c\/p\u003e\n\n\u003ch3\u003eWill this fit my Infiniti or Nissan model?\u003c\/h3\u003e\n\u003cp\u003eCompatibility covers many popular generations but not every variation. Check your model year and bumper type before purchasing to ensure the relocator aligns with the factory tow-eye and parking-sensor layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Infiniti 2008–2015 2nd Gen G35\/G37\/Q60 and 2014-up Q50 without front parking sensor\u003c\/li\u003e\n  \u003cli\u003eFits Nissan 2007–2018 GT-R and 2013–2018 370Z (excludes Nismo bumper)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with vehicles that have front parking sensors in the tow-eye area\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward and non-invasive: no cutting, drilling, or permanent modification of the bumper. The kit uses the OEM tow-eye opening as the mounting point so you can return the vehicle to stock easily if desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove the factory tow hook cover cap (no trim tools needed on many models)\u003c\/li\u003e\n  \u003cli\u003eScrew the CNC T6 aluminum adapter into the vehicle’s tow-eye\u003c\/li\u003e\n  \u003cli\u003eAttach the steel mounting panel and bolt your license plate using included screws and nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and features make this kit durable and functional?\u003c\/h3\u003e\n\u003cp\u003eThis relocator stands apart from lighter, single-piece aftermarket options by using a combination of materials and multiple mounting positions. The heavy-gauge steel bracket is powder-coated to resist chips and rust, while the billet aluminum adapter provides precision fit and strength in the receiver.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 billet aluminum tow-bar rod adapter for secure threading into tow-eye\u003c\/li\u003e\n  \u003cli\u003eBlack powder-coated steel mounting panel with eight positions to avoid vents and sensors\u003c\/li\u003e\n  \u003cli\u003eAdjustable angle to follow bumper curvature and maintain airflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I mount a front camera or keep sensors and vents clear?\u003c\/h3\u003e\n\u003cp\u003eThe panel’s multiple mounting locations let you place the plate where it won’t block intakes, lights, or parking sensors. Some users also attach small front cameras to the bracket for supplemental visibility, using the optional mounting positions and hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEight mount locations help avoid blocking intake vents or lights\u003c\/li\u003e\n  \u003cli\u003eAdjustable bracket angle preserves sensor and airflow performance\u003c\/li\u003e\n  \u003cli\u003eOptional support point for attaching a compact front camera (camera not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who want an aggressive, track-inspired front aesthetic without permanent bumper modifications will appreciate this kit. It’s ideal for owners of compatible Infiniti and Nissan models who prefer a sturdy, long-lasting relocator made from CNC aluminum and powder-coated steel, and for anyone seeking a reversible, no-drill solution that retains factory functionality and allows optional camera mounting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to drill into my bumper to install this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No drilling required; the adapter threads into the factory tow-eye and the steel plate bolts on using included hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this block my parking sensors or intake vents?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The bracket offers eight mounting positions and adjustable angle to avoid vents and sensors in most compatible bumpers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67591821590713,"sku":"B07FTWJW9L","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-view-mounted-license-relocator.jpg?v=1790558844"},{"product_id":"ijdmtoy-led-license-plate-lights-for-acura-honda-xenon-white-can-bus-error-free-fit","title":"iJDMTOY LED License Plate Lights for Acura \u0026 Honda — Xenon White, CAN-bus Error-Free Fit","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY Full LED License Plate Lights are direct-fit xenon white LED replacement assemblies with built-in CAN-bus decoders for a brighter, error-free license plate illumination on compatible Acura and Honda models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSwap out dull, yellowish incandescent or weak OEM bulbs for these full LED modules designed to match factory mounting points and wiring on specified Acura and Honda vehicles. With integrated error suppression and triple the output of typical miniature bulbs, these assemblies upgrade both the look and visibility of your license area without dashboard bulb-out warnings. The plug-and-play style keeps installation straightforward while protecting delicate socket pins during connection.\u003c\/p\u003e\n\n\u003ch3\u003eWill these license plate lights fit my Acura or Honda?\u003c\/h3\u003e\n\u003cp\u003eThese full LED assemblies are engineered to directly replace the factory units on many Acura and Honda models without modification. Confirm compatibility by cross-checking the model-year list before ordering to ensure a proper fit and alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAcura: 2007–2012 MDX, 1999–2007 RL, 2004–2008 TL, 2004–2014 TSX, 2013–2018 ILX, 2013–2018 RDX\u003c\/li\u003e\n  \u003cli\u003eHonda: Civic Sedan 2001–2015, Pilot 2006–2008, Accord Sedan (4-Door) 2003–2017, Odyssey 2000–2004\u003c\/li\u003e\n  \u003cli\u003eDesigned for factory mounting points and original power connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much brighter and cleaner is the light output?\u003c\/h3\u003e\n\u003cp\u003eThe LEDs deliver a crisp xenon white beam that is roughly three times brighter than traditional incandescent or warm white OEM bulbs. This provides a cleaner plate illumination that improves plate readability and contributes to a modern exterior appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuper bright xenon white LED diodes for a neutral, high-contrast glow\u003c\/li\u003e\n  \u003cli\u003eEven illumination across the plate area to avoid hot spots\u003c\/li\u003e\n  \u003cli\u003eSuperior brightness compared to miniature replacement bulbs and older LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these assemblies cause bulb-out errors or require extra wiring?\u003c\/h3\u003e\n\u003cp\u003eNo extra resistors or error-cancelling modules are typically necessary because each assembly includes a built-in CAN-bus error-free decoder. That means most vehicles will not show a dashboard bulb-out warning after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated CAN-bus decoder prevents bulb-out warnings on compatible systems\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connection uses the factory power harness—no splicing needed\u003c\/li\u003e\n  \u003cli\u003eIf a vehicle reports errors, check connector seating and pin alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and handling?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward but requires care when accessing the housing and reconnecting the power plug to avoid bending the thin contact pins. The OEM housing is usually accessed from behind the trunk liner and released with fastener clips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove OEM housing from behind trunk liner or tail panel held by clips\u003c\/li\u003e\n  \u003cli\u003eUnplug factory power cord, replace with iJDMTOY LED assembly, then reconnect\u003c\/li\u003e\n  \u003cli\u003eAlign delicate thin pins carefully to avoid damage or poor contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These iJDMTOY full LED license plate lights are ideal for Acura and Honda owners who want a clean xenon-white upgrade that fits factory locations, eliminates bulb-out warnings, and gives a modern, brighter look. If you value ease of installation, consistent illumination, and compatibility across multiple model years, these plug-and-play assemblies offer a practical visual and safety-focused enhancement for your vehicle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these LEDs trigger a bulb-out warning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They include a built-in CAN-bus decoder to prevent most bulb-out warnings; verify connector seating if an error appears.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these are designed to plug into the factory harness, but handle the thin contact pins carefully during reconnection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67593123004601,"sku":"B00AUMJVE4","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-assembly-acura-mdx-license-light.jpg?v=1790572093"},{"product_id":"ijdmtoy-lexus-hard-plastic-key-fob-case-for-es-gs-is-rc-nx-rx-lx-glossy-abs-89904-53651-fit","title":"iJDMTOY Lexus hard plastic key fob case for ES\/GS\/IS\/RC\/NX\/RX\/LX — glossy ABS, 89904-53651 fit","description":"\u003cp\u003e\u003cstrong\u003eThis iJDMTOY hard-shell key fob case is a glossy ABS replacement cover designed to protect and style compatible Lexus key remotes without affecting keyless functions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a compatible Lexus key fob, this rigid protective cover gives your remote a refined look while shielding it from everyday wear. Made from durable ABS plastic with a polished finish, the case snaps over the factory transmitter to guard against drops, scratches, dirt, and moisture. It’s designed to fit OEM style keys (fitment reference 89904-53651) across a wide range of Lexus models from 2013 and newer — check the product images to confirm visual match before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Lexus remotes will this hard case fit?\u003c\/h3\u003e\n\n\u003cp\u003eThis cover is shaped to match many 2013-up Lexus remote shells, including ES, GS, IS, RC, NX, RX and LX variants listed in the product specs. Fitment is focused on the OEM key body referenced, so visual confirmation is recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: ES300h\/ES350 (2013–2018), GS series (2013+), IS (2014+), RC (2015+), NX (2015+), RX and LX (2016+)\u003c\/li\u003e\n  \u003cli\u003eDesigned around OEM key 89904-53651 form factor\u003c\/li\u003e\n  \u003cli\u003eNot universal — compare your original key with gallery photos\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the ABS shell protect my key fob while preserving function?\u003c\/h3\u003e\n\n\u003cp\u003eThe hard ABS construction forms a rigid barrier that reduces impact and surface damage without blocking signal paths. Because it covers the existing remote rather than replacing internal components, the case maintains keyless entry and engine start performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS plastic provides impact and scratch resistance\u003c\/li\u003e\n  \u003cli\u003eGloss finish resists staining and looks polished\u003c\/li\u003e\n  \u003cli\u003eNon-metallic material avoids interference with radio signals\u003c\/li\u003e\n  \u003cli\u003eFull front and back panels protect the whole transmitter body\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is involved in installing or removing the key shell?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is quick and tool-free — the two-piece cover snaps over your existing key in about a minute. Removal is equally simple if you need to access the factory key for battery replacement or programming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-piece design: front and back panels included\u003c\/li\u003e\n  \u003cli\u003eNo adhesives or tools required for fitment\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeat removal without deformation\u003c\/li\u003e\n  \u003cli\u003eLeaves buttons exposed for easy operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose this hard plastic case over silicone or metal alternatives?\u003c\/h3\u003e\n\n\u003cp\u003eThe ABS gloss case balances durability and aesthetics: it’s tougher than soft silicone, resists scratches better than matte finishes, and unlike metal shells it won’t risk weakening the key’s wireless signals. It also offers a premium look that elevates a plain key fob.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStronger and more rigid than silicone or rubber jackets\u003c\/li\u003e\n  \u003cli\u003eGloss finish provides a premium visual upgrade\u003c\/li\u003e\n  \u003cli\u003eNon-conductive material avoids signal attenuation common with metals\u003c\/li\u003e\n  \u003cli\u003eFull coverage protects against common daily damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who want an easy, stylish way to protect their Lexus key remote without altering its electronics. If you own one of the compatible Lexus models and prefer a polished, long-lasting shell that installs quickly, this cover adds protection and a refined appearance while keeping all functions intact. Before purchasing, compare your remote to the product images to ensure the shape matches your OEM key shell.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this case affect my Lexus keyless entry or start?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The ABS shell covers the exterior only and is non-metallic, so it preserves wireless function and engine start performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How can I confirm this fits my key before buying?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your OEM key shape to the product gallery images and the listed fitment reference (OEM 89904-53651) to ensure a match.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67593149743289,"sku":"B08HHFDG4X","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-lexus-keyfob-front-view.jpg?v=1790572392"},{"product_id":"ijdmtoy-led-license-plate-lights-for-infiniti-q50-nissan-juke-versa-xenon-white-can-bus-error-free","title":"iJDMTOY LED License Plate Lights for Infiniti Q50, Nissan Juke, Versa — Xenon White, CAN-bus Error-Free","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY Full LED License Plate Lights are direct-fit LED assemblies that replace incandescent housings to deliver bright xenon-white illumination with built-in CAN-bus error-free decoding.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSwap the dull, yellowish factory bulbs for a modern, long-lasting LED upgrade designed specifically for selected Infiniti and Nissan models. These full assemblies provide even light across your plate while preventing dashboard bulb-out errors thanks to their integrated CAN-bus decoder. The upgrade improves nighttime visibility for your license plate, refreshes the rear styling, and installs using the same mounting points as the stock housings.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these iJDMTOY LED license lights fit?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are engineered to match the factory housings on a narrow set of model years so they plug in and mount without cutting or splicing. Confirm fitment for your vehicle before ordering to ensure a straightforward swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInfiniti Q50: 2014–2017\u003c\/li\u003e\n  \u003cli\u003eNissan Juke: 2011–2017\u003c\/li\u003e\n  \u003cli\u003eNissan Versa: 2012–2017\u003c\/li\u003e\n  \u003cli\u003eNissan X-Trail: 2007–2013 (select markets)\u003c\/li\u003e\n  \u003cli\u003eNissan Rogue Sport: 2017–2020\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much brighter and more uniform is the light compared to stock bulbs?\u003c\/h3\u003e\n\u003cp\u003eThese full LED housings use xenon-white diodes placed to deliver even illumination across the plate rather than a hotspot. Expect roughly triple the perceived brightness over warm incandescent or OEM warm-white LEDs, producing a crisp, clean look at night.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuper bright xenon-white LED diodes for crisp illumination\u003c\/li\u003e\n  \u003cli\u003eEven light distribution across the license plate surface\u003c\/li\u003e\n  \u003cli\u003eConsiderably higher lumen perception than stock bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I see a bulb-out warning after installing these LED assemblies?\u003c\/h3\u003e\n\u003cp\u003eNo—these iJDMTOY assemblies include a built-in CAN-bus error-free decoder that communicates with your car’s electrical system to prevent false bulb-out messages. That means you won’t need external resistors or warning-canceling modules in compatible vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated CAN-bus decoder to avoid dashboard warnings\u003c\/li\u003e\n  \u003cli\u003eNo extra wiring or resistors required for the supported vehicles\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct plug-and-play replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what do I need to know?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable removing simple trunk or bumper fasteners. The process follows the factory removal steps: extract the OEM housing, remove the halogen bulb, insert the new LED assembly, and reattach the housing—no cutting or splicing required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove OEM housing from trunk liner or rear bumper (clips or screws)\u003c\/li\u003e\n  \u003cli\u003ePull out the existing halogen bulb from the license housing\u003c\/li\u003e\n  \u003cli\u003ePlug in the new LED assembly and secure the housing back in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers of the listed Infiniti and Nissan models who want a simple, plug-and-play lighting improvement that modernizes rear-end styling and increases license plate illumination without triggering electrical errors. Choose these assemblies if you prefer a direct replacement that preserves factory mounting and wiring while providing brighter, whiter light and long-lasting LED performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these LEDs cause a dashboard bulb-out warning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The assemblies include a built-in CAN-bus decoder to prevent bulb-out errors on compatible vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lights require any wiring modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No wiring changes are needed; they are direct-fit replacements for the listed model years.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67593162129593,"sku":"B07VBJXK7B","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-assembly-license-plate-light.jpg?v=1790572573"},{"product_id":"ijdmtoy-led-license-plate-lights-for-toyota-corolla-2014-2018-xenon-white-can-bus-error-free-direct-fit","title":"iJDMTOY LED License Plate Lights for Toyota Corolla 2014-2018 — Xenon White, CAN-bus Error-Free Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY Full LED license plate light assemblies are direct-fit xenon-white replacements designed specifically for 2014–2018 Toyota Corolla models, delivering noticeably brighter, even illumination with built-in CAN-bus error-free decoding.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSwap your factory warm or yellowish bulbs for these full LED housings to give the rear of your Corolla a cleaner, modern look and superior license plate visibility at night. These assemblies are engineered to match the original housing footprint so installation avoids complicated wiring or modifications, and the integrated decoder prevents dash bulb-out warnings on vehicles with CAN-bus systems.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter and whiter are these LEDs compared to stock bulbs?\u003c\/h3\u003e\n\u003cp\u003eThese iJDMTOY assemblies use super bright xenon-white diodes that produce roughly three times the visible brightness of typical incandescent or warm OEM LEDs. The result is a crisp, even wash of light that makes the plate clearly legible from a greater distance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApproximately 3× brighter than incandescent and many OEM bulbs\u003c\/li\u003e\n  \u003cli\u003eXenon-white color for improved nighttime contrast\u003c\/li\u003e\n  \u003cli\u003eEven illumination across the plate without hot spots\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill they fit my 2014–2018 Toyota Corolla without modification?\u003c\/h3\u003e\n\u003cp\u003eYes — the housings are built as direct-fit replacements for the 2014–2018 Corolla license plate lamp locations. No splicing or resistors should be needed because the units include an integrated CAN-bus error-free decoder.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch OEM mounting points and connector style\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play installation in most Corolla trims\u003c\/li\u003e\n  \u003cli\u003eDecoder prevents bulb-out error messages on CAN-bus systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is involved in installing these LED license plate lights?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires removing the OEM housing from the trunk liner or rear bumper, unplugging the factory connector, and plugging in the new LED assembly. Take care aligning thin pins when reattaching the connector to avoid bending contacts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove OEM housing fasteners or clips from trunk liner\/bumper\u003c\/li\u003e\n  \u003cli\u003eUnplug original connector, install LED housing, reconnect carefully\u003c\/li\u003e\n  \u003cli\u003eAvoid force on thin pins; ensure proper socket alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in terms of durability and appearance?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are designed to replace the original lamps with an updated aesthetic and long-lasting LED illumination. Expect a cleaner, modern rear look and consistent light output that resists the yellowing and dimming common to older incandescent bulbs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eModern xenon-white tone for a refreshed vehicle appearance\u003c\/li\u003e\n  \u003cli\u003eUniform light distribution reduces glare and hotspots\u003c\/li\u003e\n  \u003cli\u003eLED longevity outlasts traditional filament bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers of Toyota Corolla model years 2014 through 2018 who want an easy, reliable upgrade for their license plate lighting. If you want cleaner-looking rear lighting, better nighttime plate legibility, and a plug-and-play install without dashboard error warnings, these iJDMTOY full LED assemblies fit that need. They suit DIY enthusiasts comfortable removing trim fasteners and reconnecting small vehicle connectors, as well as professional installers seeking direct-fit LED replacements for customer Corollas.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these cause a dashboard bulb-out warning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The built-in CAN-bus error-free decoder prevents bulb-out warnings on compatible Corolla models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools typically required—just common trim fastener tools and careful alignment of the connector pins.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67593197519033,"sku":"B07JKDNTW9","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-corolla-license-plate-front-view.jpg?v=1790572857"},{"product_id":"ijdmtoy-15-smd-5202-replacement-drl-bulbs-for-jeep-compass-2017-2020-white-6000k-plug-and-play-upgrade","title":"iJDMTOY 15-SMD 5202 Replacement DRL Bulbs for Jeep Compass 2017-2020 — White 6000K Plug-and-Play Upgrade","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY's White 15-SMD High Power replacement bulbs convert the front lower bumper DRL sockets of 2017–2020 Jeep Compass models to a crisp 6000K xenon-white output using 15 high-power 2835 SMD chips each.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese plug-and-play replacement bulbs are designed specifically for the second-generation Jeep Compass (2017 and newer). They replace the stock 5202 halogen DRL\/drive bulbs, moving from a warm, yellowish incandescent tone to a brighter, modern white light. The assemblies use 15 x 0.5W 2835 SMD chips per bulb for improved lumen density while maintaining compact sizing and compatibility with existing sockets.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these bulbs fit my 2017–2020 Jeep Compass?\u003c\/h3\u003e\n\u003cp\u003eThey are made to be direct replacements for the factory 5202 halogen bulbs used in the front lower bumper DRL\/drive positions of 2nd-gen Compass models. No modification to the socket or housing is required for electrical and physical fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect 5202 socket compatibility for 2017-up Jeep Compass\u003c\/li\u003e\n  \u003cli\u003eSame footprint as factory halogen units for easy installation\u003c\/li\u003e\n  \u003cli\u003eNo cutting, splicing, or special adapters needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of light output and color temperature do these bulbs deliver?\u003c\/h3\u003e\n\u003cp\u003eEach bulb contains fifteen 2835 SMD LEDs rated at 0.5W apiece to produce a concentrated white light. The color temperature is approximately 6000 Kelvin, providing a neutral-to-cool white appearance compared with the stock yellowish halogen tone.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e15 high-power 2835 SMD chips per bulb for denser light\u003c\/li\u003e\n  \u003cli\u003eAbout 6000K color temperature for modern white output\u003c\/li\u003e\n  \u003cli\u003eReplaces incandescent warmth with crisp white illumination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these bulbs require extra parts or wiring changes?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward: they are plug-and-play replacements for the stock 5202 bulbs and typically do not require additional resistors or harnesses. If your vehicle has specific CANbus or bulb-out monitoring that triggers errors, an inline CANbus decoder or resistor may be required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for direct swap into the existing 5202 socket\u003c\/li\u003e\n  \u003cli\u003eMost vehicles accept them without extra components\u003c\/li\u003e\n  \u003cli\u003eOptional CANbus decoder\/resistor may be needed for error-prone systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This product is aimed at Jeep Compass owners (2017–2020) who want a straightforward upgrade from stock halogen DRLs to a cleaner white light without changing housings. It suits DIY drivers comfortable swapping bulbs and anyone seeking a sharper, modern DRL appearance while keeping factory sockets and mounts intact. Avoid if your vehicle's wiring or lighting system actively monitors bulb type and you prefer a factory-spec yellowish tone.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs plug-and-play for my 2019 Jeep Compass?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they are direct 5202 replacements and typically install without modifications on 2017–2020 Compass models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What color temperature do these bulbs produce?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They produce about 6000K, a neutral-to-cool white similar to xenon-style lighting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67593211445433,"sku":"B079Y143SH","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-packaging-jeep-compass-drl.jpg?v=1790573078"},{"product_id":"ijdmtoy-led-license-plate-lights-for-toyota-camry-highlander-prius-c-xenon-white-can-bus-direct-fit","title":"iJDMTOY LED License Plate Lights for Toyota Camry\/Highlander\/Prius C — Xenon-White, CAN-bus Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eThese iJDMTOY full LED license plate light assemblies replace factory lamps on select Toyota models to deliver bright xenon-white illumination with built-in CAN-bus error-free decoders.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrade your vehicle’s rear lighting with a direct-fit LED solution designed to swap in for the original license plate housings on several Toyota models. The iJDMTOY assemblies use high-output diodes and integrated electronics so you get even, white light without dashboard bulb-out warnings. Installation follows the original mounting points and wiring, making this an accessible DIY upgrade that improves visibility and gives the rear end a cleaner, modern look.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Toyota models are these LED license plate lights compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies are made as direct replacements for a range of Toyota vehicles produced in the 2010s. They match the OEM housing size and connector layout for proper fitment, avoiding modifications for most cars in the compatibility list.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2012–2017 Toyota Camry (XV50)\u003c\/li\u003e\n  \u003cli\u003e2014–2018 Toyota Highlander\u003c\/li\u003e\n  \u003cli\u003e2013–2018 Toyota Avalon\u003c\/li\u003e\n  \u003cli\u003e2012–2019 Toyota Yaris\u003c\/li\u003e\n  \u003cli\u003e2012–2019 Toyota Prius C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow bright are these LEDs compared with factory bulbs?\u003c\/h3\u003e\n\u003cp\u003eiJDMTOY's assemblies use multiple high-intensity diodes that produce a crisp xenon-white output, delivering roughly triple the brightness of old incandescent plates and many OEM warm-white LEDs. The distribution is designed to eliminate hot spots and provide even illumination across the plate surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuper bright xenon-white LEDs for crisp, legible illumination\u003c\/li\u003e\n  \u003cli\u003eEven light spread to avoid glare or dark zones\u003c\/li\u003e\n  \u003cli\u003eMarkedly brighter than yellowish or warm OEM bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I get bulb-out warnings or electrical errors after installing these LEDs?\u003c\/h3\u003e\n\u003cp\u003eNo—these license plate lights include integrated CAN-bus error-free decoders that mimic the electrical load of original bulbs so the vehicle’s computer does not register a fault. That extra circuitry prevents dashboard warnings and ensures the assemblies function correctly with the car’s lighting system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in CAN-bus decoder to prevent bulb-out codes\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play design for original connectors\u003c\/li\u003e\n  \u003cli\u003eRetains proper electrical behavior without additional resistors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and handling delicate contacts?\u003c\/h3\u003e\n\u003cp\u003eInstallation replaces the OEM housing, usually accessed through the trunk liner or rear bumper area using existing fasteners. Careful alignment of the thin electrical pins and socket openings is important to avoid bending or damaging contacts during reconnection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove OEM housing held by clips or screws\u003c\/li\u003e\n  \u003cli\u003eUnplug factory power cord before swapping lamps\u003c\/li\u003e\n  \u003cli\u003eAlign thin pins with sockets to avoid contact damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own compatible Toyota models and want a reliable, easy-to-install upgrade for clearer, whiter license plate illumination. These assemblies suit owners who prefer a modern aesthetic and improved night-time legibility without dashboard errors, and DIYers who want a direct-fit swap using factory mounting points.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these LEDs cause a bulb-out error on Toyota dashboards?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Each assembly includes a CAN-bus error-free decoder to prevent bulb-out warnings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these without modifying my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are direct-fit replacements that use existing mounting points and factory connectors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67593354739897,"sku":"B07BGSH3RW","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-license-plate-front-view.jpg?v=1790574879"},{"product_id":"ijdmtoy-hard-plastic-key-fob-case-for-cadillac-2014-c7-corvette-gloss-abs-two-piece-protection","title":"iJDMTOY Hard Plastic Key Fob Case for Cadillac \u0026 2014+ C7 Corvette — Gloss ABS Two‑Piece Protection","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY hard plastic key fob case is a gloss ABS snap-on cover that protects and refreshes Cadillac and select Chevrolet C7 Corvette key fobs without interfering with keyless entry or engine start.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis snap-on key fob shell from iJDMTOY is designed to guard factory transmitters used on many Cadillac models and the 2014-up Chevrolet C7 Corvette. It replaces soft silicone skins with a rigid gloss finish that resists scratches, drops, and everyday wear while preserving signal performance. The set includes both front and back panels so you protect the entire fob and keep its original buttons and functions accessible.\u003c\/p\u003e\n\n\u003ch3\u003eWhich cars and key fobs will this cover fit?\u003c\/h3\u003e\n\n\u003cp\u003eThe case is compatible with a range of Cadillac models and the Chevrolet C7 Corvette; check your fob shape against photos before buying. Fit is intended for specific model years listed below, and the two-piece design snaps over the OEM transmitter housing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Cadillac: 2008–2011 DTS, 2008–2011 STS, 2008–2014 Escalade, 2009–2014 CTS, 2009–2014 SRX, 2013–2014 XTS, 2013–2014 ATS\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2014 and newer Chevrolet C7 Corvette key fobs\u003c\/li\u003e\n  \u003cli\u003eIncludes front and back panels for full coverage\u003c\/li\u003e\n  \u003cli\u003eCompare your key to product images to confirm correct fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this hard plastic shell protect my key fob?\u003c\/h3\u003e\n\n\u003cp\u003eThe ABS hard shell provides a rigid barrier against impacts and surface damage while covering the entire transmitter body. It prevents scratches, dents, and grime from reaching the original plastic and helps reduce visible wear from daily handling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eShields the fob from bumps, drops, and abrasions\u003c\/li\u003e\n  \u003cli\u003ePrevents dirt and moisture from collecting on the transmitter\u003c\/li\u003e\n  \u003cli\u003eGloss finish hides light scuffs and maintains a fresh look\u003c\/li\u003e\n  \u003cli\u003eTwo-piece design protects both front and back surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the case interfere with remote functions or starting the car?\u003c\/h3\u003e\n\n\u003cp\u003eiJDMTOY engineered the ABS shell to be thin and non-conductive so it won’t weaken wireless signals or prevent push-button starts. Because it’s a solid-plastic cover rather than metal, you keep full keyless entry and remote start functionality when installed correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNon-metallic ABS avoids blocking RF and proximity signals\u003c\/li\u003e\n  \u003cli\u003ePrecise cutouts keep buttons accessible and operational\u003c\/li\u003e\n  \u003cli\u003eSnaps on quickly for immediate use without reprogramming\u003c\/li\u003e\n  \u003cli\u003eTest compatibility with your vehicle before purchase using photos\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and does it change the look of the key?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation takes about a minute—snap the two panels over your existing key fob for instant protection and a refreshed appearance. The glossy finish adds a sleek, vehicle-inspired accent without modifying the button layout or increasing bulk significantly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTool-free snap-on installation in under a minute\u003c\/li\u003e\n  \u003cli\u003eRestores worn-looking keys with a stylish gloss surface\u003c\/li\u003e\n  \u003cli\u003eLightweight ABS adds protection without much added bulk\u003c\/li\u003e\n  \u003cli\u003eRemovable so you can swap or clean the original key when needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who own one of the supported Cadillac models or a 2014‑up Chevrolet C7 Corvette and want a durable, attractive alternative to silicone sleeves. It’s ideal for owners who need full-panel coverage, dislike soft rubber jackets, and want to protect expensive OEM transmitters from everyday damage while preserving factory remote functionality.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this cover work with push-button start?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ABS plastic shell is non-metallic and designed not to block keyless entry or push-button start signals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know it fits my Cadillac key fob?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your key to the product photos and the listed compatible model years before purchasing to ensure correct fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67593428435129,"sku":"B07BKQZW7R","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-view-cadillac-keyfob-case.jpg?v=1790575453"},{"product_id":"ijdmtoy-led-license-plate-lights-for-chevy-camaro-malibu-volt-cruze-xenon-white-can-bus-decoder","title":"iJDMTOY LED License Plate Lights for Chevy Camaro\/Malibu\/Volt\/Cruze — Xenon White, CAN-bus Decoder","description":"\u003cp\u003e\u003cstrong\u003eThese are full LED direct-replacement license plate light assemblies from iJDMTOY that deliver xenon-white illumination and include built-in CAN-bus decoders to avoid bulb-out errors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade your Chevy or compatible Opel\/Cadillac model with a ready-to-install LED license plate lamp designed to replace the factory housing and bulbs. Unlike single-bulb replacements, this full assembly uses multiple bright LEDs to produce uniform, daylight-toned light that improves rear visibility and gives your car a modern look. The lamps are engineered to fit specific model years and include error-suppressing electronics so the vehicle’s computer won’t report a bulb fault after installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these iJDMTOY LED plate lights fit?\u003c\/h3\u003e\n\u003cp\u003eThese LED assemblies are engineered as direct-fit replacements for a set list of Chevy models and select Cadillac\/Opel applications. They fit only the listed model years and body styles—verify your vehicle year and hatchback vs. sedan configuration before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Chevy 2014–2024 Camaro, 2013–2015 Malibu, 2011–2015 Volt, 2016-up Cruze Hatchback (NOT Cruze sedan)\u003c\/li\u003e\n  \u003cli\u003eCadillac compatibility: 2018–2019 XTS\u003c\/li\u003e\n  \u003cli\u003eInternational Opel examples: Insignia 2008-up, Zafira 2002–2011, and similar fits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these LED assemblies improve illumination and appearance?\u003c\/h3\u003e\n\u003cp\u003eThe iJDMTOY modules use xenon-white LED diodes arranged for even light distribution across the license plate area. They offer a notably brighter, crisper output than aging incandescent bulbs or warm OEM LEDs, reducing dim or yellowed lighting and modernizing the rear aesthetic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTriple the brightness vs. typical miniature replacement bulbs and many OEM warm-white LEDs\u003c\/li\u003e\n  \u003cli\u003eNeutral xenon-white tone provides clear plate readability and a cleaner rear look\u003c\/li\u003e\n  \u003cli\u003eFull-assembly design prevents hot spots for smoother, more consistent illumination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill my car show a bulb-out warning after installation?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies include built-in CAN-bus decoders to prevent false bulb-out or error messages on compatible vehicle computers. The decoder balances the LED load so most vehicles detect the lamp as a proper replacement without triggering warnings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOn-board CAN-bus error-free decoder is integrated into each assembly\u003c\/li\u003e\n  \u003cli\u003eDesigned to eliminate dash warnings commonly caused by low-current LEDs\u003c\/li\u003e\n  \u003cli\u003eWorks with the listed vehicle models; verify compatibility for peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is the installation and what should I watch for?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable removing the factory housing and swapping the bulb\/assembly. Typical steps involve removing clips or screws, unlocking the bulb base, and fitting the iJDMTOY unit while ensuring the bulb base locks in place to keep moisture out.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove OEM housing from trunk liner or rear bumper (usually held by clips or screws)\u003c\/li\u003e\n  \u003cli\u003eTwist and unlock the factory bulb base, extract the old bulb, and insert the LED adapter\u003c\/li\u003e\n  \u003cli\u003eLock the bulb base into the LED lamp to prevent condensation and seal the housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this upgrade best for? Drivers who want a practical lighting improvement and a modernized rear appearance will find these assemblies useful—especially owners of the supported Chevy models who need a direct-fit replacement that won’t trigger dashboard errors. Installers seeking a plug-and-play solution with consistent, bright illumination and CAN-bus compatibility will appreciate the attention to fitment and electronics. If your vehicle isn’t listed or you drive a Cruze sedan, consider verifying fitment or consulting with iJDMTOY customer support before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these LEDs trigger a bulb-out warning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each assembly has a built-in CAN-bus decoder designed to prevent bulb-out warnings on the listed vehicle models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fit the Cruze sedan?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — these fit the Cruze Hatchback (2016-up) only; the sedan is not compatible.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67593546629305,"sku":"B07955J8V6","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-assembly-license-plate-light_bef69c88-4e09-4410-81a9-bf14b1c1fb07.jpg?v=1790576697"},{"product_id":"ijdmtoy-h11-h8-880-relay-wiring-harness-kit-dual-output-inline-fuse-push-button-switch","title":"iJDMTOY H11\/H8\/880 Relay Wiring Harness Kit — Dual Output, Inline Fuse \u0026 Push-Button Switch","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY's H11\/H8\/880 Relay Wiring Harness Kit is a complete relay, fuse, switch and connector set designed to power up to two fog or driving lights directly from the battery while protecting factory wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis plug-and-play style wiring harness gives your fog or driving lamps a dedicated circuit so they run at full brightness without overloading your vehicle’s OEM wiring. The kit bundles a pre-wired 4-pin SPST relay with socket, an inline fuse box, a teardrop push-button switch with LED, and dual H11\/H8\/H9 outputs — all intended for 12V vehicle electrical systems. It’s engineered for straightforward installation and reliable operation on lights drawing up to about 160W total, and it helps route current cleanly from the battery to auxiliary lamps.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this harness protect my vehicle’s wiring?\u003c\/h3\u003e\n\u003cp\u003eThe harness routes high-current power straight from the battery through a fused relay circuit, preventing excessive load on factory circuits and switches. That reduces heat buildup and potential electrical damage while ensuring stable voltage to auxiliary lamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInline fuse box provides overcurrent protection at the source\u003c\/li\u003e\n  \u003cli\u003e4-pin SPST relay isolates high amperage from dash wiring\u003c\/li\u003e\n  \u003cli\u003eDedicated positive\/negative battery leads cut stress on OEM harnesses\u003c\/li\u003e\n  \u003cli\u003eRated for 12V systems and loads up to about 30–40A (max ~160W)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how do the connections work?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a relay module with socket, battery input leads, dual H11\/H8\/H9 output pigtails, an inline safety fuse assembly, and a teardrop pushbutton switch with an LED indicator. The relay’s trigger wire connects to the switch inside the cabin, while power flows from the battery through the relay to your lights when switched on.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrewired 4-pin SPST relay and socket for quick relay installation\u003c\/li\u003e\n  \u003cli\u003eRed\/black O-ring or C-ring battery terminals for secure battery hookup\u003c\/li\u003e\n  \u003cli\u003eDual H11\/H8\/H9 outputs to feed two lamps or a single dual connector\u003c\/li\u003e\n  \u003cli\u003eSwitch-mounted LED indicator and double-sided tape for flex placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this harness with different lights and vehicles?\u003c\/h3\u003e\n\u003cp\u003eThe harness is designed as a universal accessory for most 12V cars, trucks, and off-road rigs using H11\/H8\/880-style connectors. It supports many auxiliary lights and is suitable for lamps drawing moderate power, but confirm wattage and connector compatibility before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with front fog lights, driving lamps, lightbars, and pod lamps\u003c\/li\u003e\n  \u003cli\u003eAccepts light loads between approximately 9–16V and up to ~160W total\u003c\/li\u003e\n  \u003cli\u003eUniversal switch placement with adhesive backing fits most dashboards\u003c\/li\u003e\n  \u003cli\u003eRelay rated to handle typical automotive auxiliary lamp currents (30–40A peak)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the relay harness safely and efficiently?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic automotive electrical skills: mounting the relay, securing the inline fuse close to the battery, routing wires away from moving parts, and grounding correctly. Use insulated tools and disconnect the battery while connecting the main battery leads to avoid shorts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount inline fuse near the battery positive terminal\u003c\/li\u003e\n  \u003cli\u003eConnect relay outputs to the light’s positive\/negative leads\u003c\/li\u003e\n  \u003cli\u003eRoute trigger wire into the cabin and attach to the included switch\u003c\/li\u003e\n  \u003cli\u003eSecure all wiring with zip ties and check connections before first use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The iJDMTOY H11\/H8\/880 Relay Wiring Harness Kit is aimed at DIY car owners, mechanics, and off-road enthusiasts who want a reliable, protected way to power auxiliary fog and driving lights. If you’re adding brighter lights, replacing factory wiring that’s prone to heat, or installing additional lamps on trucks, SUVs, or work vehicles, this harness simplifies wiring while improving circuit safety and lamp performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this harness work with my vehicle's 12V electrical system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s built for standard 12V systems and supports lights drawing up to about 160W total; verify your lamp wattage first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I control two lights with this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the dual H11\/H8 outputs let you power up to two lamps from the single relay circuit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67593793798329,"sku":"B019J7XIGC","price":54.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-view-harness-kit.jpg?v=1790578905"},{"product_id":"ijdmtoy-led-side-mirror-puddle-lights-for-ford-lincoln-xenon-white-can-bus-decoder","title":"iJDMTOY LED Side Mirror Puddle Lights for Ford \u0026 Lincoln — Xenon White, CAN-bus Decoder","description":"\u003cp\u003e\u003cstrong\u003eiJDMTOY LED side mirror puddle lights are direct-fit, xenon-white LED replacements that brighten the area under Ford and Lincoln mirrors while preventing dash bulb-out errors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese plug-and-play LED mirror courtesy lights are designed to replace factory puddle lamps on many Ford and Lincoln vehicles from the mid-2000s through the early 2020s. They deliver a crisp, modern white projection that is noticeably brighter than aging incandescent or warm-toned OEM bulbs, and include an integrated CAN-bus decoder so your vehicle's warning system remains quiet after installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these puddle lights fit?\u003c\/h3\u003e\n\u003cp\u003eThe iJDMTOY puddle lights are compatible with a wide range of Ford and Lincoln models across several years. Always verify your mirror's connector and mounting style before purchasing to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord: Edge (2007–2024), F-150\/Raptor (2007–2014), Flex (2009–2019), Explorer (2011+), Ranger (2019–2023), Taurus (2008–2017).\u003c\/li\u003e\n  \u003cli\u003eLincoln: LS (2003–2006), MKX (2007–2015), MKT (2010–2019), MKS (2009–2016), Navigator (2007–2016).\u003c\/li\u003e\n  \u003cli\u003eCheck mirror housing design and connector style if your exact year or trim isn't listed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much brighter and clearer are these LEDs compared to stock bulbs?\u003c\/h3\u003e\n\u003cp\u003eThese LED modules use multiple xenon-white diodes arranged for smooth, even projection. They produce approximately three times the visible brightness of older incandescent or warm white OEM bulbs, improving ground illumination and curb visibility near the door.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuper bright xenon-white LEDs for sharper contrast at night.\u003c\/li\u003e\n  \u003cli\u003eEven light projection to avoid hot spots or uneven puddle shapes.\u003c\/li\u003e\n  \u003cli\u003eTriple the brightness relative to many factory miniature bulbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these puddle lights cause dashboard bulb-out warnings?\u003c\/h3\u003e\n\u003cp\u003eNo—each assembly contains a built-in CAN-bus error-free decoder that prevents common bulb-out errors on compatible Ford\/Lincoln electrical systems. That eliminates the need for separate resistors or external decoders in most installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated CAN-bus circuitry prevents false bulb failure messages.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play wiring keeps the vehicle's diagnostics stable.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has unique wiring, verify compatibility before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the iJDMTOY mirror puddle lights?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward with basic hand tools. Depending on mirror style, you can access the OEM lamp from under the mirror housing or behind the mirror cap; remove the old module and plug in the new LED unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLook for an access gap under the exterior rearview mirror to pry out the OEM lamp.\u003c\/li\u003e\n  \u003cli\u003eAlternatively, remove the mirror cap to reach the lamp from inside the housing.\u003c\/li\u003e\n  \u003cli\u003eUnplug the factory connector, insert the new LED assembly, and reassemble the mirror cover.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: drivers who want a modern, brighter mirror courtesy light without dashboard errors, as well as owners restoring aging bulbs to crisp white illumination. These are ideal for Ford and Lincoln owners upgrading from yellowed or dim puddle lamps to a contemporary xenon-white output that improves approach visibility and adds a refined exterior touch.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these puddle lights fit my 2015 Ford Explorer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The lights fit 2011-up Ford Explorers; confirm your mirror's connector and housing style before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra resistors to avoid bulb-out errors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Each unit includes a built-in CAN-bus error-free decoder so additional resistors are usually unnecessary.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67593812213945,"sku":"B0795BX9Z8","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-view-puddle-light-assembly.jpg?v=1790579290"},{"product_id":"ijdmtoy-led-license-plate-light-8-5-24-smd-xenon-white-universal-fit-aluminum","title":"iJDMTOY LED License Plate Light 8.5\" 24-SMD Xenon White — Universal Fit, Aluminum","description":"\u003cp\u003e\u003cstrong\u003eThe iJDMTOY Universal Frame Mount LED License Plate Light is an 8.5-inch, 24-SMD xenon white LED bar that mounts above your rear license plate to deliver bright, even illumination and optional reverse-light function.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact LED lamp is built for broad vehicle compatibility and practical versatility. Housed in a lightweight aluminum body with a clear acrylic lens, the 24 ultra-bright diodes spread uniform light across the plate area. It installs at the license plate\/frame location and ties into the existing 12V wiring for steady or reverse-activated illumination.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this light fit different cars, trucks, and SUVs?\u003c\/h3\u003e\n\u003cp\u003eThe design focuses on a universal fit so it can be used on JDM, KDM, European, and American models as well as many trucks, SUVs, and RVs. Its compact 8.50-inch length and simple two-wire hookup make placement above the license plate straightforward. Minor drilling or bracket adjustments may be required depending on bumper contours.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8.50-inch length suits most license plate frames\u003c\/li\u003e\n  \u003cli\u003eLightweight aluminum housing conforms to varied mounting points\u003c\/li\u003e\n  \u003cli\u003eTwo-wire 12V connection taps into tail or plate circuit\u003c\/li\u003e\n  \u003cli\u003eCompatible with JDM, KDM, Euro, and American vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat lighting performance and functions can I expect?\u003c\/h3\u003e\n\u003cp\u003eInside the clear acrylic lens are 24 xenon-white SMD LEDs engineered for even, shadow-free coverage of the plate surface. The lamp can be angled: tilt down to focus on the plate or rotate backward to act as an auxiliary reversing light when wired accordingly. The output favors a crisp, street-legal white rather than colored tints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24 SMD LEDs for consistent plate illumination\u003c\/li\u003e\n  \u003cli\u003eAdjustable tilt and rotation for plate or reverse use\u003c\/li\u003e\n  \u003cli\u003ePure white xenon tone for clear visibility\u003c\/li\u003e\n  \u003cli\u003eLow power draw typical of LED technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the iJDMTOY license plate LED bar?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be quick for someone comfortable with basic wiring and light mounting. The unit has two wires that you tap into a 12V source — either the existing license plate light circuit or a reverse-light circuit for backup activation. Use included screws or your plate frame fasteners to secure the bar; seal connections to prevent moisture intrusion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTap two wires to 12V+\/– or reverse light feed\u003c\/li\u003e\n  \u003cli\u003eMount using existing plate\/frame holes or supplied fasteners\u003c\/li\u003e\n  \u003cli\u003eSeal wiring with heat shrink or silicone to protect from water\u003c\/li\u003e\n  \u003cli\u003eMinor trimming or bracket positioning may be necessary for fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Drivers who want a brighter, more uniform license plate light or a compact auxiliary reverse lamp will find this iJDMTOY LED bar useful. It's suitable for car enthusiasts upgrading aesthetics on JDM\/KDM\/Euro\/American builds, truck and SUV owners needing improved plate visibility, and DIYers who prefer a simple two-wire install. This lamp is also a good choice for vehicles where the factory plate lamp is dim, cloudy, or absent and a durable, low-draw LED solution is desired.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this LED bar fit my vehicle's license plate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 8.5-inch universal design fits most cars, trucks, SUVs, and RVs; minor bracket or hole alignment may be needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it work as a reverse light?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the tilt\/rotate design can be wired to the reverse circuit to function as an auxiliary backup light.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"iJDMTOY","offers":[{"title":"Default Title","offer_id":67594769629369,"sku":"B01G9FJBJA","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ijdmtoy-front-view-license-plate-led-bar.jpg?v=1790585189"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/ijdmtoy-front-view-license-plate-led-bar.jpg?v=1790612670","url":"https:\/\/redleafauto.ca\/collections\/ijdmtoy.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}