{"title":"JFG RACING","description":"\u003cp\u003eBrowse 38 JFG RACING products at RedLeaf Auto, including motorcycle, atv \u0026amp; snowmobile parts and motorcycle \u0026amp; atv accessories. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"jfg-racing-dirt-bike-full-slip-on-exhaust-for-hawk-250-crf230f-crf150f-tbr7-lightweight-direct-fit-mid-pipe","title":"JFG RACING Dirt Bike Full Slip-On Exhaust for HAWK 250 CRF230F CRF150F TBR7 — Lightweight, Direct-Fit Mid-Pipe","description":"\u003cp\u003e\u003cstrong\u003eThe JFG RACING Dirt Bike Full Slip-On Exhaust is a bolt-on replacement muffler and mid-pipe assembly built to update the sound, reduce weight, and improve throttle response for HAWK 250, CRF230F, CRF150F and TBR7 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want a straightforward, track-ready exhaust swap that fits common off-road models without major engine work, this JFG RACING full slip-on offers a tidy blend of lighter construction, modern styling, and an easier install than a full header replacement. It’s designed as a direct-fit slip-on assembly for specific dirt bikes, so you can replace your stock can and mid-pipe quickly while keeping frame and mounting points intact.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this slip-on change my bike’s ride feel?\u003c\/h3\u003e\n\u003cp\u003eSwitching to this slip-on typically reduces rotational weight and slightly sharpens throttle response because of a freer-flowing path compared with some OEM cans. Expect a crisper engine note and a lighter feel during quick revs, though exact behavior depends on your bike’s setup and tuning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduced muffler mass for improved handling during acceleration\u003c\/li\u003e\n  \u003cli\u003eSmoother flow path often aids mid-range responsiveness\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit without modifying the stock frame or brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation complicated and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eThis JFG RACING slip-on is engineered for bolt-on installation using existing mounting points, so many riders can install it at home in about an hour. Basic hand tools like sockets, wrenches, and a torque wrench are all that’s typically required; no cutting or welding should be necessary for compatible models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design matches OEM mounting locations\u003c\/li\u003e\n  \u003cli\u003eCommon tools only—socket set, ratchet, and torque wrench\u003c\/li\u003e\n  \u003cli\u003eIncludes mid-pipe and muffler sections for one-step replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build details does this exhaust use?\u003c\/h3\u003e\n\u003cp\u003eThe construction favors lightweight metals and polished finishes to balance durability and style for off-road use. Components are often stainless or alloy with welded seams and a mounting collar designed for vibration resistance; finishes vary by production lot and region.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight metal body with corrosion-resistant surfaces\u003c\/li\u003e\n  \u003cli\u003eWelded joints and secure mounting collar for trail durability\u003c\/li\u003e\n  \u003cli\u003eFinished styling to visually upgrade the bike’s rear profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I need to remap or rejet my carb\/ECU after fitting this muffler?\u003c\/h3\u003e\n\u003cp\u003eMany riders run a slip-on without immediate tuning changes, but air\/fuel characteristics can shift slightly, especially on carbureted bikes or highly modified engines. Monitor performance and, if you notice hesitation or running lean\/rich, consider a jetting adjustment or ECU tune for optimal results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlip-on may affect air\/fuel mixture depending on setup\u003c\/li\u003e\n  \u003cli\u003eCarbureted bikes sometimes need rejetting for best response\u003c\/li\u003e\n  \u003cli\u003eECU-equipped bikes benefit from a diagnostic check after install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This JFG RACING full slip-on is aimed at riders of HAWK 250, CRF230F, CRF150F and TBR7 models who want a quick, reversible exhaust upgrade that improves sound and reduces weight without changing the stock frame or doing a full header swap. It suits weekend trail riders, amateur racers, and anyone looking to modernize their bike’s look and response with a bolt-on solution. Note that regional product details can vary — check fitment and local regulations before installing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my CRF230F without modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the slip-on is made as a direct replacement for CRF230F mounting points; verify model year compatibility before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this exhaust require professional installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, basic mechanical skills and standard hand tools are usually sufficient for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67585440907449,"sku":"B07GYSLJMD","price":231.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-slip-on-front-view.jpg?v=1790470134"},{"product_id":"jfg-racing-hydraulic-dirt-bike-stand-lift-1000-lb-capacity-red-black-adjustable-height-rubber-padded-top","title":"JFG RACING Hydraulic Dirt Bike Stand Lift 1000 lb Capacity — Red\/Black, Adjustable Height \u0026 Rubber-Padded Top","description":"\u003cp\u003e\u003cstrong\u003eThe JFG RACING Adjustable Hydraulic Dirt Bike Stand is a compact hydraulic lift that safely raises most dirt bikes up to 1000 lbs for maintenance and storage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for riders, mechanics, and home garages, this red-and-black steel lift gives stable, single-person operation with a rubber-padded top plate and multiple height settings. Its robust construction and non-slip base make routine tasks — from chain checks to wheel removal — easier and more stable without bulky equipment. Below you’ll find clear answers to common buyer questions, plus exact specifications and practical use points to help you decide.\u003c\/p\u003e\n\n\u003ch3\u003eHow much weight and what bikes will this lift support?\u003c\/h3\u003e\n\u003cp\u003eThe lift is rated to handle a maximum static load of 1000 lbs (about 450 kg), making it suitable for nearly all motocross and off-road bikes as well as many light ATVs. Always confirm your motorcycle’s weight and the lift’s rated capacity before use. Also measure the clearance under the engine to ensure the top plate can contact your bike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum capacity: 1000 lbs \/ 450 kg.\u003c\/li\u003e\n  \u003cli\u003eTop plate dimensions: 28 cm x 16.5 cm (11\" x 6.5\").\u003c\/li\u003e\n  \u003cli\u003eIntended for most dirt bikes and similar off-road motorcycles.\u003c\/li\u003e\n  \u003cli\u003eCheck minimum ground clearance against lift’s lowest height.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat height adjustments and features does the stand provide?\u003c\/h3\u003e\n\u003cp\u003eThe adjustable top plate moves between approximately 27 cm (10.6 in) and 36 cm (14.1 in) to fit different frame heights and riding setups. A lock nut secures the position once you’ve reached the desired lift. The top surface includes a rubber pad that protects the bike’s contact area, while the base has anti-slip points for added stability during work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable range: 27–36 cm (10.6–14.1 in).\u003c\/li\u003e\n  \u003cli\u003eLock nut secures the top plate to prevent slippage.\u003c\/li\u003e\n  \u003cli\u003eDurable rubber pad cushions and protects the bike frame.\u003c\/li\u003e\n  \u003cli\u003eFour anti-slip base points maintain stable contact with the floor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to operate and transport this lift?\u003c\/h3\u003e\n\u003cp\u003eThe stand uses a manual hydraulic mechanism and an integrated handle so one person can lift and lower a motorcycle without extra tools. It’s relatively lightweight for a steel unit and can be set down or moved quickly between garage, trailer, or pit areas. The simple pump action and compact footprint make it practical for tight spaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-person operation with built-in lifting handle.\u003c\/li\u003e\n  \u003cli\u003eCompact footprint for use in garages and trailers.\u003c\/li\u003e\n  \u003cli\u003eManual hydraulic pump offers controlled lift and release.\u003c\/li\u003e\n  \u003cli\u003eEasy to place on the ground or move by one operator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the construction quality and finish?\u003c\/h3\u003e\n\u003cp\u003eBuilt from solid steel, the lift resists deformation under load and is finished in a textured red-and-black coating for a professional, low-key look. The welding and surface finish are designed for workshop use and routine handling. While durable, routine inspection of welds, fasteners, and the rubber pad is recommended for long-term safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-gauge steel construction for durability.\u003c\/li\u003e\n  \u003cli\u003eTextured red and black coating for corrosion resistance and aesthetics.\u003c\/li\u003e\n  \u003cli\u003eWelded frame and secure fastenings for reliable use.\u003c\/li\u003e\n  \u003cli\u003eReplaceable rubber pad protects the bike’s contact points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This JFG RACING lift is for dirt-bike owners, amateur mechanics, race teams, and anyone needing a reliable, easily moved work platform to perform maintenance, cleaning, or inspections. If you want a compact hydraulic lift with adjustable height, protective rubber top, and a 1000 lb capacity for most off-road motorcycles, this stand is a practical, budget-friendly choice. Ensure your bike’s under-engine clearance is within the lift’s adjustable range before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum weight capacity?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The stand supports up to 1000 lbs (450 kg). Verify your bike’s weight and the lift rating before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one person operate the lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The manual hydraulic handle allows single-person lifting and lowering of most dirt bikes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67585945305273,"sku":"B07S79ZQLS","price":177.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-stand.jpg?v=1790480323"},{"product_id":"jfg-racing-10-carbon-fiber-look-universal-motorcycle-steering-damper-speed-sensitive-lightweight","title":"JFG RACING 10\" Carbon-Fiber Look Universal Motorcycle Steering Damper — Speed-Sensitive, Lightweight","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING's 10\" carbon fiber–look universal motorcycle steering damper reduces steering oscillations and improves stability for sport and road bikes (bracket not included).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis compact, speed-sensitive stabilizer is designed for riders who want firmer handling and reduced front-end wobble without adding significant weight or changing the bike's aesthetic. It pairs a lightweight carbon-fiber appearance with an internal damping mechanism that adjusts resistance with speed, helping you maintain control in a variety of riding conditions. Note that this listing supplies the damper body only; a model-specific mounting bracket or clamps are required for installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this steering damper improve handling at higher speeds?\u003c\/h3\u003e\n\u003cp\u003eThe damper uses speed-sensitive technology to increase damping force as the bike accelerates, which helps tame quick steering inputs and suppress handlebar shake. That progressive resistance lets you maintain direction more easily during fast cornering, highway runs, or when encountering rough surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10\" length suited for sport and street bike geometries\u003c\/li\u003e\n  \u003cli\u003eVariable damping increases with wheel speed for smoother control\u003c\/li\u003e\n  \u003cli\u003eReduces the frequency and amplitude of steering oscillations\u003c\/li\u003e\n  \u003cli\u003eLightweight design minimizes added mass to the front end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my motorcycle and what mounting parts are needed?\u003c\/h3\u003e\n\u003cp\u003eThis is a universal damper intended to work with most sport and road racing motorcycles, but it ships without a mounting bracket. You’ll need to choose a compatible clamp or model-specific bracket and hardware to attach it to your triple clamp or frame. Measure your fork and triple clamp spacing before ordering mounting hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal fit concept for many sport and street bikes\u003c\/li\u003e\n  \u003cli\u003eBracket and clamps not included—purchase separately\u003c\/li\u003e\n  \u003cli\u003eMeasure triple clamp clearance and fork spacing for proper fitment\u003c\/li\u003e\n  \u003cli\u003eAdapter kits often available for OEM mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical and visual features of this damper?\u003c\/h3\u003e\n\u003cp\u003eThe damper sports a carbon-fiber color finish that gives a textured, high-end look while keeping weight low. At 10\" overall length it provides a balance between leverage and compactness suitable for tight handling bikes. The body is engineered to resist corrosion and everyday wear when mounted correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon-fiber color appearance with textured finish\u003c\/li\u003e\n  \u003cli\u003eLightweight construction to preserve front-end dynamics\u003c\/li\u003e\n  \u003cli\u003e10\" overall length for balanced leverage and clearance\u003c\/li\u003e\n  \u003cli\u003eDurable exterior treatment for road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and maintenance look for this product?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires a compatible bracket and basic motorcycle tools; familiar mechanics can install it in one session. Maintenance is minimal: periodically check mounting hardware for tightness and inspect the housing for damage or leaks. There are no scheduled internal services for normal road use—replace if performance degrades.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires separate bracket\/clamps and standard tools to fit\u003c\/li\u003e\n  \u003cli\u003eCheck fasteners regularly and inspect for leaks or damage\u003c\/li\u003e\n  \u003cli\u003eNo routine internal servicing for typical street use\u003c\/li\u003e\n  \u003cli\u003eReplace unit if damping performance declines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who own sport or road-focused motorcycles and want a lightweight, speed-sensitive stabilizer to reduce front-end wobble and enhance high-speed confidence. It's a strong choice for experienced riders upgrading handling without altering the bike's appearance, but buyers should be comfortable sourcing and fitting a compatible mounting bracket for their specific model.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this damper include a mounting bracket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The damper is sold without a bracket; you must buy a compatible mount or clamp separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the damper adjustable for different riding conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses speed-sensitive damping rather than manual adjustment to vary resistance with speed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67586519564473,"sku":"B097DN4Y94","price":125.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-damper-front-angle.jpg?v=1790485496"},{"product_id":"jfg-racing-7-8-22mm-cnc-twist-throttle-assembly-red-anodized-kit-with-clear-top-cable-for-pit-mini-bikes","title":"JFG RACING 7\/8\" (22mm) CNC Twist Throttle Assembly — Red anodized kit with clear top \u0026 cable for pit\/mini bikes","description":"\u003cstrong\u003eJFG RACING's 7\/8\" (22mm) CNC twist throttle assembly is a complete throttle kit — anodized aluminum housing, translucent rotating top, cable and grip — built to fit pit bikes, mini bikes and many ATVs.\u003c\/strong\u003e\n\n\u003cp\u003eThis throttle assembly replaces standard 7\/8\" handlebars with a durable, quick-action twist throttle engineered from 6061 T6 aluminum and a clear top that exposes the rotating regulator and cable. It ships as a kit including the throttle housing, throttle cable and a rubber grip, and is available in multiple anodized colors to match or accent your bike. The design allows installation of common hand guards and delivers a responsive feel engineered for off-road and small-displacement bikes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the transparent top improve throttle control?\u003c\/h3\u003e\n\u003cp\u003eThe translucent crown lets you visually confirm cable routing and regulator movement so you can spot kinks or misalignment before a ride. Seeing the mechanism helps with quick inspections and gives peace of mind during pre-ride checks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClear top reveals cable and rotating regulator movement.\u003c\/li\u003e\n  \u003cli\u003eHelps detect cable binding or incorrect routing early.\u003c\/li\u003e\n  \u003cli\u003eProtective film on the clear part should be removed before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this throttle fit my bike and what mounts does it require?\u003c\/h3\u003e\n\u003cp\u003eThis unit is made for standard 7\/8\" (22mm) motorcycle handlebars and fits most pit bikes, mini bikes, dirt bikes and many ATVs with that handlebar diameter. The adjustable clamp design lets you fine-tune positioning to match existing controls and hand guards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 22mm (fits 7\/8\" bars).\u003c\/li\u003e\n  \u003cli\u003eAdjustable clamps for personalized mounting position.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common hand guards and bar-end accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does it offer?\u003c\/h3\u003e\n\u003cp\u003eThe throttle housing is CNC-machined from 6061 T6 aluminum for a high strength-to-weight ratio and anodized for corrosion resistance and color options. The grip is molded rubber for traction, while the anodized finish and knurled areas provide a rugged, race-ready appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 T6 aluminum construction — lightweight and hard-wearing.\u003c\/li\u003e\n  \u003cli\u003eAnodized color choices reduce corrosion and add visual appeal.\u003c\/li\u003e\n  \u003cli\u003eKnurled grip section and molded rubber for improved handhold.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included in the package?\u003c\/h3\u003e\n\u003cp\u003eThe kit is supplied with the twist throttle, throttle cable and one handle grip — basic hardware is designed for a straightforward swap onto most 7\/8\" bars. No installation manual is included, so basic mechanical experience or reference to a service guide is recommended for safe setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage: 1 twist throttle, 1 throttle cable, 1 handle grip.\u003c\/li\u003e\n  \u003cli\u003eClamp-style mounting for simple alignment and tightening.\u003c\/li\u003e\n  \u003cli\u003eProfessional or DIY installation possible; check cable routing before final tightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders who own pit bikes, mini dirt bikes or small ATVs with 7\/8\" handlebars and want a durable, visually checkable throttle with quick action and customization options. It suits hobbyists swapping worn throttles, riders upgrading for a sportier look, and mechanics needing a reliable replacement part. If you want anodized color choices, a clear rotor top for inspections, and a CNC aluminum body built to handle off-road conditions, this JFG RACING throttle kit is designed for that use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this throttle fit 7\/8\" handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the inner diameter is 22mm (7\/8\") and it fits most pit bikes, mini bikes and ATVs with that handlebar size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You receive one twist throttle assembly, one throttle cable and one rubber handle grip; no installation manual is included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67586894758073,"sku":"B0CB7K864L","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-throttle-front-view.jpg?v=1790496330"},{"product_id":"jfg-racing-7-8-quick-twist-throttle-assembly-for-22mm-handlebars-black-cnc-aluminum-pre-fitted-cable","title":"JFG RACING 7\/8\" Quick-Twist Throttle Assembly for 22mm Handlebars — Black CNC Aluminum, Pre-fitted Cable","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING's 7\/8\" quick-twist throttle kit is a complete, CNC-machined throttle assembly with cable and grips designed to fit all 22mm (7\/8\") motorcycle handlebars for dirt bikes, ATVs, and mini bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact throttle set combines a lightweight 6061-T6 aluminum housing, a clear rotator for visual cable inspection, and textured rubber grips to deliver a faster, more controlled throttle response on off-road and pit bikes. The kit arrives with the throttle housing, pre-routed cable and a pair of grips so you can swap in the unit with standard 22mm handlebars. It’s engineered to resist corrosion, simplify maintenance, and sharpen roll-on acceleration without complicated modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this throttle improve response on off-road rides?\u003c\/h3\u003e\n\u003cp\u003eThe quick-twist design gives a shorter, more direct movement from rider input to throttle opening, helping you get immediate power when you need it. The precision-machined aluminum sleeve reduces flex and keeps the cable aligned under load, so throttle inputs feel consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick-action knob reduces rotational travel for faster response.\u003c\/li\u003e\n  \u003cli\u003eRigid CNC aluminum housing minimizes play and flex under throttle.\u003c\/li\u003e\n  \u003cli\u003ePre-fitted cable ensures smooth, consistent pull and return.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my bike’s handlebars and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe throttle is made for standard 22mm (7\/8\") motorcycle bars and is universally compatible with most dirt bikes, pit bikes, ATVs and mini bikes that use that bore size. Installation is straightforward: remove the old throttle, slide on the new housing, attach the cable to the throttle tube, and secure with the clamp screws.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 7\/8\" (22mm) handlebars — no special adapters needed.\u003c\/li\u003e\n  \u003cli\u003eComes with cable and grips for a single-purchase swap out.\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools (screwdriver, wrench) required for mounting and cable adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does the kit include?\u003c\/h3\u003e\n\u003cp\u003eThe main housing and internal components are CNC-cut from 6061-T6 aluminum for a balance of light weight and strength, while the grip surfaces are made from durable rubber for traction. The metallic components resist rust and abrasion to withstand mud, dust and vibration common to trail and track use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 aluminum construction for corrosion resistance and strength.\u003c\/li\u003e\n  \u003cli\u003eTextured rubber grips for improved handhold in wet or dusty conditions.\u003c\/li\u003e\n  \u003cli\u003eTransparent throttle shell allows quick visual checks of cable routing and wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain and adjust the transparent twist throttle?\u003c\/h3\u003e\n\u003cp\u003eThe clear rotator is intentionally see-through so you can inspect cable seating and detect early signs of fray or misalignment. Routine maintenance involves wiping away dirt, checking cable tension, and ensuring the protective film is removed from the transparent part before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove protective film on the clear housing before riding.\u003c\/li\u003e\n  \u003cli\u003eKeep the cable lubricated and check tension to avoid slack or binding.\u003c\/li\u003e\n  \u003cli\u003ePeriodically inspect the clear rotor for cracks or burrs and replace if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who want a simple, reliable upgrade to sharpen throttle feel on dirt bikes, pit bikes, mini bikes and ATVs with 7\/8\" (22mm) bars. It suits weekend trail riders, amateur racers and DIY mechanics who prefer a plug-and-play replacement with high-quality aluminum components and visible cable routing for easier maintenance. If you ride off-road and want quicker roll-on control with a kit that includes the cable and grips, this JFG RACING throttle assembly is built to be a direct, durable swap-in.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this throttle fit 22mm handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The JFG RACING throttle is designed for standard 7\/8\" (22mm) handlebars and fits most dirt bikes, mini bikes and ATVs using that size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the throttle easy to install myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes the throttle, cable and grips for a straightforward swap using basic hand tools and simple cable adjustment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67586894954681,"sku":"B0BG8W5RBS","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-throttle-front-view_2c941a5b-df25-4806-89b7-19477b01bb78.jpg?v=1790496331"},{"product_id":"jfg-racing-7-8-22mm-cnc-aluminum-twist-throttle-assembly-black-transparent-cover-quick-action-cable-knurled-rubber-grip","title":"JFG RACING 7\/8\" (22mm) CNC Aluminum Twist Throttle Assembly — Black Transparent Cover, Quick-Action Cable \u0026 Knurled Rubber Grip","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING's 7\/8\" (22mm) CNC aluminum twist throttle assembly is a universal, quick-action throttle kit that includes a translucent throttle housing, cable, and grip for pit bikes, mini bikes, ATVs and dirt bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis throttle assembly combines lightweight 6061 T6 CNC aluminum with a clear top cover and knurled rubber grip to give a durable, easy-to-install control that fits any 7\/8\" (22mm) handlebar. It ships with a pre-routed throttle cable and rubber grip, and is anodized for corrosion resistance and a sharp finished look. The transparent cover makes cable routing visible for easier adjustments and troubleshooting without disassembly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this throttle improve control and response?\u003c\/h3\u003e\n\u003cp\u003eThe JFG RACING twist throttle is designed for quicker, more predictable throttle inputs. The rotating shaft engages the regulator directly when you roll the grip, reducing slack and giving a firmer feel under acceleration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick-action shaft for faster throttle return and reduced lag\u003c\/li\u003e\n  \u003cli\u003eKnurled rubber grip for non-slip hand contact under wet or muddy conditions\u003c\/li\u003e\n  \u003cli\u003e6061 T6 aluminum housing resists flex for consistent throttle geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my 7\/8\" pit bike, mini bike or ATV?\u003c\/h3\u003e\n\u003cp\u003eYes — the assembly is built for standard 7\/8\" (22mm) handlebars and is compatible with most pit bikes, mini bikes, dirt bikes, and ATVs that accept that size. The adjustable clamp and included cable make it adaptable to a wide range of machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 22mm to match common 7\/8\" bars\u003c\/li\u003e\n  \u003cli\u003eAdjustable clamp spacing to suit personal mounting preferences\u003c\/li\u003e\n  \u003cli\u003eUniversal fit for CRF50, KLX, SSR, TTR and other small-displacement models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish are used, and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eThe housing is machined from 6061 T6 aluminum for a balance of lightness and strength, then anodized to resist corrosion and abrasion. The grip is molded rubber with a knurled pattern to improve handhold and longevity under rough use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 T6 CNC aluminum body resists bending and cracking\u003c\/li\u003e\n  \u003cli\u003eAnodized coloration available in multiple colors for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-quality rubber grip resists tearing and improves rider comfort\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with motorcycle controls: slide onto a 7\/8\" bar, secure the clamp, route the supplied cable, and fine-tune the adjustment. The transparent top makes future maintenance easier by allowing quick visual checks for cable wear or binding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with throttle cable and grip; no separate grip purchase required\u003c\/li\u003e\n  \u003cli\u003eTransparent cover shows cable routing and helps spot issues early\u003c\/li\u003e\n  \u003cli\u003eHand guards and other handlebar accessories remain compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This throttle assembly is aimed at riders and mechanics who want a durable, no-nonsense upgrade for small-displacement dirt and pit bikes or ATVs. It suits weekend trail riders, track-day hobbyists, and anyone needing a reliable, visibly inspectable throttle that’s quick to install and built to withstand off-road use. Note: installation instructions are not included; basic mechanical skills or professional fitting are recommended.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this throttle fit 22mm handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The throttle is designed for standard 7\/8\" (22mm) handlebars and fits most pit bikes, mini bikes, and ATVs with that diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are installation instructions included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit includes the twist throttle, cable, and grip but does not include installation instructions; basic mechanical skills are recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67587000303801,"sku":"B0CB7K3YCW","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-assembly.jpg?v=1790498680"},{"product_id":"jfg-racing-7-8-22mm-quick-twist-throttle-assembly-red-cnc-aluminum-with-clear-housing-rubber-grip","title":"JFG RACING 7\/8\" (22mm) Quick-Twist Throttle Assembly — Red CNC Aluminum with Clear Housing \u0026 Rubber Grip","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING's 7\/8\" (22mm) quick-twist throttle assembly is a lightweight CNC aluminum throttle kit with a clear housing, rubber grip, and cable, made to fit most dirt bikes, pit bikes, ATVs and mini motorcycles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis throttle kit combines a corrosion-resistant 6061-T6 aluminum body, transparent twist housing for visible cable routing, and a high-traction rubber grip to deliver faster response and reliable operation on off-road machines. It ships with the throttle assembly, a matching throttle cable, and one grip—ready for straightforward swap-out on handlebars that measure 7\/8\" (22mm). The red anodized finish gives a clean, race-inspired look while the clear sleeve helps you spot and adjust the cable quickly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this throttle improve control and throttle response?\u003c\/h3\u003e\n\u003cp\u003eThe quick-action design shortens the distance the grip must travel to open the throttle, so openings are more immediate and easier to modulate during aggressive riding. The combination of precise CNC machining and a tactile rubber grip reduces slippage when you need a confident input.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick-twist mechanism for faster throttle engagement and snappier acceleration.\u003c\/li\u003e\n  \u003cli\u003eTextured rubber grip increases control in wet or muddy conditions.\u003c\/li\u003e\n  \u003cli\u003eLightweight 6061-T6 aluminum reduces rotational inertia for crisper feel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my bike’s handlebars and how easy is it to install?\u003c\/h3\u003e\n\u003cp\u003eThis throttle is designed for universal fit on standard 7\/8\" (22mm) handlebars, the same size found on most dirt, pit, and mini bikes plus many ATVs. Installation is straightforward: remove the old throttle, mount the new housing, route and adjust the supplied cable, and retighten—no special tools beyond basic hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits all 7\/8\" (22mm) handlebars used on common off-road motorcycles.\u003c\/li\u003e\n  \u003cli\u003eIncludes throttle cable and one rubber grip to simplify swap-in.\u003c\/li\u003e\n  \u003cli\u003eTransparent housing exposes cable for quick visual checks and adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does the throttle offer?\u003c\/h3\u003e\n\u003cp\u003eThe main body is machined from 6061-T6 aluminum for strength with minimal weight, then anodized in red to resist corrosion and wear. The clear twist sleeve is removable and includes a protective film at shipping; the rubber grip is designed to withstand heat, oils, and abrasion from regular off-road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 CNC aluminum body — lightweight, strong, and rust-resistant.\u003c\/li\u003e\n  \u003cli\u003eDurable rubber grip for long wear life and improved grip traction.\u003c\/li\u003e\n  \u003cli\u003eTransparent housing allows inspection and prevents hidden cable problems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain and adjust the throttle over time?\u003c\/h3\u003e\n\u003cp\u003eRegularly inspect the visible cable through the clear housing for fraying and check for smooth twist action; apply light lubricant to the cable where appropriate and keep the housing free of heavy grime. Tighten mounting screws to the manufacturer-recommended torque and replace the cable if you notice slack or irregular response.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVisual cable checks through the transparent sleeve for early wear detection.\u003c\/li\u003e\n  \u003cli\u003eOccasional light lubrication of cable ends and throttle pivot points.\u003c\/li\u003e\n  \u003cli\u003eReplace cable immediately if fraying or inconsistent return is observed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who want a cost-effective performance upgrade for off-road and mini motorcycles—mechanically minded hobbyists, weekend trail riders, pit-bike racers, and ATV owners seeking faster throttle response, easier maintenance, and a durable, race-inspired appearance. This kit is best for anyone with standard 7\/8\" (22mm) handlebars who prefers a visible cable route for quick checks and a lightweight aluminum build for improved feel.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this throttle fit 22mm handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It's designed for standard 7\/8\" (22mm) handlebars commonly used on dirt bikes, pit bikes, and many ATVs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes one quick-twist throttle, one throttle cable, and one rubber handle grip; protective film on the clear housing should be removed before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67587000205497,"sku":"B0BG8BPNBN","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-throttle-front-assembly.jpg?v=1790498680"},{"product_id":"jfg-racing-7-8-22mm-twist-throttle-assembly-for-pit-mini-bikes-blue-cnc-aluminum-preinstalled-cable","title":"JFG RACING 7\/8\" (22mm) Twist Throttle Assembly for Pit \u0026 Mini Bikes — Blue CNC Aluminum, Preinstalled Cable","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING's 7\/8\" (22mm) CNC aluminum twist throttle assembly is a complete throttle kit (throttle, cable and grip) designed to replace standard pit bike and mini bike throttles for crisper control and durable performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact throttle combines a translucent rotating sleeve, anodized 6061 T6 aluminum housing and a knurled rubber grip to provide a precise, responsive throttle feel on dirt bikes, ATVs and mini motorcycles that use 7\/8\" handlebars. The package includes the twist throttle, a pre-routed throttle cable and a matching grip—ready to install on most CRF50, KLX, SSR, TTR and similar 110–250cc machines. The component is anodized for corrosion resistance and visual appeal, and the clear top allows quick inspection of cable routing and movement.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this throttle improve responsiveness on trail or track?\u003c\/h3\u003e\n\u003cp\u003eThe CNC-machined shaft and precision clamp reduce slop between the grip and cable, delivering quicker throttle input and more immediate engine response. The assembly's quick-action design helps with rapid acceleration and tighter control when riding technical sections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 T6 aluminum construction for rigid, low-deflection shaft action\u003c\/li\u003e\n  \u003cli\u003eTranslucent top shows cable movement to catch binding early\u003c\/li\u003e\n  \u003cli\u003eKnurled rubber grip improves hand traction under load\u003c\/li\u003e\n  \u003cli\u003ePreinstalled cable for consistent, predictable actuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my bike and what handlebars are compatible?\u003c\/h3\u003e\n\u003cp\u003eThis throttle is built for universal compatibility with 7\/8\" (22mm) handlebars, which are standard on most pit, mini and many off-road bikes. It works with common dirt bike models such as CRF50, KLX, TTR and a wide range of 110–250cc pit bikes and ATVs, but you should confirm your handlebar diameter before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 22mm (7\/8\")—fits standard pit bike handlebars\u003c\/li\u003e\n  \u003cli\u003eAdjustable clamp spacing for minor variations in handlebar layout\u003c\/li\u003e\n  \u003cli\u003eSuitable for mini bikes, dirt bikes and many ATVs using 7\/8\" grips\u003c\/li\u003e\n  \u003cli\u003eHand guard compatible—clearance for most aftermarket guards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is the throttle assembly?\u003c\/h3\u003e\n\u003cp\u003eMade from anodized 6061 T6 aluminum, the throttle housing resists corrosion and stands up to off-road vibration better than common plastic units. The metal body combined with a quality rubber grip gives longevity while remaining light enough for performance use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 T6 CNC aluminum: strong, lightweight and corrosion-resistant\u003c\/li\u003e\n  \u003cli\u003eAnodized finish reduces wear and keeps colors vibrant\u003c\/li\u003e\n  \u003cli\u003eSealed cable routing reduces dirt intrusion into the throttle tube\u003c\/li\u003e\n  \u003cli\u003eRobust clamp design minimizes twisting and loosening over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with basic throttle swaps: remove the old throttle sleeve, slide on the new assembly, attach the cable to the carb or throttle body, and secure the clamps. No printed instructions are included, so having a service manual or online guide for your specific bike is helpful.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 twist throttle, 1 throttle cable, 1 handle grip\u003c\/li\u003e\n  \u003cli\u003eTransparent top protective film may need removal after unpacking\u003c\/li\u003e\n  \u003cli\u003eAdjustable clamps allow personalized positioning and tension\u003c\/li\u003e\n  \u003cli\u003eCompatible with aftermarket hand guards and end fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders upgrading worn or imprecise stock throttles, hobbyists customizing small-displacement dirt and pit bikes, and mechanics who want a durable, visually striking replacement part will appreciate this JFG RACING throttle. It’s ideal for weekend trail riders, mini bike racers and anyone seeking a quick-action, easy-to-inspect throttle solution for 7\/8\" handlebars, provided proper installation and fit verification are done before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this throttle fit 22mm handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The assembly is designed for 7\/8\" (22mm) handlebars common on pit bikes and mini dirt bikes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are hand guards compatible with this throttle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The throttle’s end and clamp clearance allow most aftermarket hand guards to be mounted.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67587000402105,"sku":"B0CB7KRKBN","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-throttle-front-view-blue.jpg?v=1790498681"},{"product_id":"jfg-racing-7-8-quick-twist-throttle-assembly-for-22mm-handlebars-blue-aluminum-clear-housing-preinstalled-cable","title":"JFG RACING 7\/8\" Quick-Twist Throttle Assembly for 22mm Handlebars — Blue Aluminum, Clear Housing \u0026 Preinstalled Cable","description":"\u003cb\u003eJFG RACING’s 7\/8\" quick-twist throttle kit is a complete aluminum-speed throttle assembly with transparent housing, cable, and grips for 22mm handlebars.\u003c\/b\u003e\n\n\u003cp\u003eThis compact throttle assembly replaces standard sleeves on 7\/8\" (22mm) motorcycle, dirt bike, pit bike, mini bike and ATV handlebars to deliver faster response and a visible cable path for easier tuning and troubleshooting. Machined from 6061-T6 aluminum and paired with a clear throttle housing and rubber grips, the unit balances durability with lightweight performance. The kit comes with the throttle, pre-routed cable and matching grips, making it a straightforward, bolt-on upgrade for many small-displacement off-road machines.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this quick-twist throttle improve response on starts and roll-ons?\u003c\/h3\u003e\n\u003cp\u003eThe quick-action design reduces internal slack and gives a more immediate cable pull when you twist, helping the engine react faster to rider input without changing engine components. The stiffer aluminum housing keeps the throttle geometry stable under heavy use, preserving consistent feel lap after lap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShorter, crisper travel for faster throttle engagement\u003c\/li\u003e\n  \u003cli\u003eRigid 6061-T6 CNC body reduces flexing under load\u003c\/li\u003e\n  \u003cli\u003ePreinstalled cable minimizes play and setup time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my bike and how easy is it to install?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is designed for universal compatibility with all 7\/8\" (22mm) handlebars, making it suitable for most pit bikes, mini motos, small motocross and ATVs using that standard bar size. Installation is straightforward: slide onto the bar, secure the clamp fasteners, route and attach the cable to the throttle body—no complex modifications typically required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 7\/8\" (22mm) handbar diameters\u003c\/li\u003e\n  \u003cli\u003eIncludes throttle cable and grips for a single-purchase install\u003c\/li\u003e\n  \u003cli\u003eClear housing lets you confirm cable routing and wear quickly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build features ensure longevity?\u003c\/h3\u003e\n\u003cp\u003eThe main housing is CNC-machined from 6061-T6 aluminum, chosen for its high strength-to-weight ratio and corrosion resistance in outdoor environments. The grip is made from resilient rubber to resist tearing and improve handhold, while the transparent cover shields internal components and allows quick inspections without disassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 aluminum body resists rust and bending\u003c\/li\u003e\n  \u003cli\u003eDurable rubber grip improves control and comfort\u003c\/li\u003e\n  \u003cli\u003eTransparent throttle cover aids maintenance checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about maintenance and adjustments?\u003c\/h3\u003e\n\u003cp\u003eThe visible throttle housing simplifies spotting cable frays, binding points or contamination so you can address issues early. Periodic lubrication of the cable and checking clamp torque will keep the assembly operating smoothly; replace the protective film on the clear cover if still present when unpacking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect visible cable for wear every few rides\u003c\/li\u003e\n  \u003cli\u003eKeep cable lightly lubricated for consistent action\u003c\/li\u003e\n  \u003cli\u003eVerify clamp bolts are tightened to avoid slipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders of small-displacement off-road machines—CRF50, KLX, SSR, TTR and similar 110–250cc dirt or pit bikes, plus mini bikes and ATVs with 7\/8\" bars—who want a faster, more serviceable throttle without radical engine changes. It's ideal for weekend trail riders, track-day hobbyists and anyone who prefers quick throttle feedback and visible cable routing for easier maintenance. If you need a color-matched, lightweight, bolt-on upgrade that’s simple to install and inspect, this JFG RACING throttle kit is engineered to meet those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this throttle compatible with 22mm handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This JFG RACING throttle is made for standard 7\/8\" (22mm) motorcycle handlebars and fits most pit bikes and ATVs using that size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the throttle cable and grips?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains the twist throttle, one throttle cable and one pair of handle grips for full installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67587000369337,"sku":"B0BG874TKW","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-throttle-assembly.jpg?v=1790498680"},{"product_id":"jfg-racing-7-8-22mm-quick-twist-throttle-assembly-green-cnc-6061-t6-aluminum-transparent-housing","title":"JFG RACING 7\/8\" (22mm) Quick-Twist Throttle Assembly — Green CNC 6061 T6 Aluminum, Transparent Housing","description":"\u003cp\u003e\u003cstrong\u003eThe JFG RACING 7\/8\" (22mm) quick-twist throttle assembly is a CNC-machined 6061 T6 aluminum throttle kit with transparent housing, cable and rubber grip that fits most dirt bikes, pit bikes, ATVs and mini bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace a sluggish or worn throttle with this lightweight, durable assembly engineered for rapid response and easy installation. Built from corrosion-resistant 6061 T6 aluminum and paired with a clear twist housing, it reveals cable routing for straightforward adjustment. The package includes the twist throttle, a matching throttle cable and a comfortable rubber grip, making it a compact upgrade for 22mm handlebars.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this quick-twist throttle change my bike's responsiveness?\u003c\/h3\u003e\n\n\u003cp\u003eThe quick-action design reduces slack between your hand input and throttle response so acceleration feels sharper and more predictable. Its compact internal mechanism shortens rotation travel for faster opening and closing of the throttle, useful when launching or navigating tight trails.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eShorter twist throw for faster engine response\u003c\/li\u003e\n  \u003cli\u003eClear housing helps you spot and fix cable play quickly\u003c\/li\u003e\n  \u003cli\u003eCNC aluminum body resists flex for consistent actuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this assembly fit my handlebars, and what comes in the box?\u003c\/h3\u003e\n\n\u003cp\u003eThis throttle is designed for standard 7\/8\" (22mm) motorcycle handlebars and suits most dirt bikes, pit bikes, mini bikes and many ATVs that use that diameter. The kit arrives ready to install with the parts needed to replace an existing throttle setup.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits 7\/8\" (22mm) handlebars—universal application\u003c\/li\u003e\n  \u003cli\u003eIncludes: 1 twist throttle, 1 throttle cable, 1 rubber handle grip\u003c\/li\u003e\n  \u003cli\u003eProtective film on transparent housing—remove before use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build features improve durability and maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eCritical components are machined from 6061 T6 aluminum, chosen for its strength-to-weight ratio and resistance to rust and corrosion. The transparent housing allows visual inspection of the cable and mechanism, making it easier to spot wear, improper routing or a need for adjustment without disassembly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e6061 T6 CNC aluminum body—lightweight and strong\u003c\/li\u003e\n  \u003cli\u003eHigh-quality rubber grip for improved comfort and traction\u003c\/li\u003e\n  \u003cli\u003eTransparent twist cover for quick visual maintenance checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools will I need?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic motorcycle maintenance. The assembly mounts on standard 22mm bars and uses the supplied throttle cable; typical installation requires handlebar disassembly, routing the new cable and a few common hand tools.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSimple bolt-on replacement for most throttles\u003c\/li\u003e\n  \u003cli\u003eRequires basic tools: screwdrivers, wrenches and pliers\u003c\/li\u003e\n  \u003cli\u003eAdjustable cable tension—fine-tune after mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This JFG RACING quick-twist throttle is intended for riders who want a faster, more positive throttle feel on 7\/8\" (22mm) handlebars—ideal for hobbyists, trail riders, pit bike owners, youth mini-bike riders and ATV enthusiasts looking to replace worn parts or upgrade performance. It suits riders who prefer visible cable routing for easier checks and those who need a lightweight, corrosion-resistant assembly. If you ride motocross, off-road trails, or maintain small-displacement bikes and ATVs, this kit is a practical, easy-to-install improvement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this throttle fit 22mm handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is made for standard 7\/8\" (22mm) motorcycle handlebars and fits most dirt bikes, pit bikes and many ATVs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes with the throttle kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes one quick-twist throttle, one throttle cable and one rubber handle grip; protective film on the transparent cover should be removed before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67587000336569,"sku":"B0BG87Z3VG","price":100.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-throttle-front-assembly-green.jpg?v=1790498683"},{"product_id":"jfg-racing-cnc-motorcycle-footpegs-for-kawasaki-klr650-1987-2018-2021-2024-black-anodized-6061-t6-y-profile-grip","title":"JFG RACING CNC Motorcycle Footpegs for Kawasaki KLR650 (1987–2018, 2021–2024) — Black Anodized 6061-T6, Y-Profile Grip","description":"\u003cstrong\u003eThese are precision-machined JFG RACING CNC footpegs built from 6061-T6 aluminum to give KLR 650 riders stronger, lighter, and longer-lasting footrests that resist corrosion.\u003c\/strong\u003e\n\n\u003cp\u003eIf you ride a Kawasaki KLR650 from model years 1987–2018 or 2021–2024 and need a durable upgrade to the stock pegs, these CNC foot pegs from JFG RACING are designed to match the bike’s fitment while improving grip, weight, and longevity. The pegs are available in black, silver, and green finishes, and feature an anodized surface and a Y-shaped profile that sheds mud and simplifies cleaning after off-road use.\u003c\/p\u003e\n\n\u003ch3\u003eWill these foot pegs fit my KLR650?\u003c\/h3\u003e\n\u003cp\u003eYes — the pegs are engineered specifically for the Kawasaki KLR 650 models listed, so they use the same mounting points and should install without modification on 1987–2018 and 2021–2024 KLR650 frames. Verify your bike’s model year and mounting hardware before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fitment for KLR 650 \/ KLR650 (1987–2018, 2021–2024)\u003c\/li\u003e\n  \u003cli\u003eUses standard peg mounting points—no custom machining required\u003c\/li\u003e\n  \u003cli\u003eCheck stock pins and springs for wear during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant are these pegs?\u003c\/h3\u003e\n\u003cp\u003eThe pegs are milled from 6061-T6 aluminum, a corrosion-resistant alloy widely used in motorcycle components for its strength-to-weight ratio. Anodizing adds a protective layer that helps prevent fading and surface corrosion during extended exposure to the elements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 aluminum construction for low weight and high strength\u003c\/li\u003e\n  \u003cli\u003eAnodized finish increases corrosion resistance and surface hardness\u003c\/li\u003e\n  \u003cli\u003eY-shaped design reduces trapped dirt, lowering wear from grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these foot pegs improve grip and control off-road?\u003c\/h3\u003e\n\u003cp\u003eThe CNC-machined teeth and open Y-profile are designed to give a secure contact area for boots, helping maintain control on rough trails or wet surfaces. The profile also clears mud and debris quickly, so grip remains effective when conditions change.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSharp, machined edges for reliable traction with riding boots\u003c\/li\u003e\n  \u003cli\u003eOpen-profile prevents clogging with mud and gravel\u003c\/li\u003e\n  \u003cli\u003eWide contact surface for stability during standing riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward thanks to a simple, familiar peg layout that mirrors OEM pegs; most riders can swap them using basic hand tools. Maintenance is minimal — periodic cleaning and a quick inspection of mounting hardware keep performance consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple structure and standard mounting make for quick swap-out\u003c\/li\u003e\n  \u003cli\u003eEasy to rinse or brush clean because of the open design\u003c\/li\u003e\n  \u003cli\u003eInspect pins and springs when reinstalling to ensure safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These JFG RACING CNC foot pegs suit KLR650 owners who want a durable, lightweight upgrade that boosts traction and resists corrosion — especially useful for dual-sport and adventure riders who encounter mud, gravel, and long hours on the trail. Choose black, silver, or green to match your bike’s aesthetic while improving rider confidence and longevity of the parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting pins and springs included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Pins and springs are often not included; check the product listing. If not, reuse OEM hardware or purchase compatible replacements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I choose colors for both pegs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pegs are available in black, silver, and green so you can pick the finish that matches your KLR650.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67587476750521,"sku":"B0C2YKQXTV","price":100.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-klr650-front-view-peg-pair.jpg?v=1790509531"},{"product_id":"jfg-racing-electric-dirt-bike-foot-pegs-surron-light-bee-x-eride-pro-fit-7075-aluminum-wide-platform","title":"JFG RACING Electric dirt bike foot pegs — Surron Light Bee X \u0026 Eride Pro fit, 7075 aluminum wide platform","description":"\u003cp\u003e\u003cstrong\u003eThese JFG RACING CNC 7075 aluminum foot pegs are heavy-duty, extra-wide replacements for Surron Light Bee and select off-road models that improve rider grip and bike control without adding significant weight.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need durable, grippy foot pegs for aggressive trail riding or electric dirt bike commuting, these JFG RACING pegs are machined from aircraft-grade 7075 aluminum and feature stainless steel tooth pins for reliable skid resistance. They are anodized to resist corrosion and designed to fit a wide range of models including Surron Light Bee X\/LBX, Eride Pro variants, and many Honda and Kawasaki models listed in the fitment. The pegs are sold without springs and include an asymmetric pin count for quick left\/right identification.\u003c\/p\u003e\n\n\u003ch3\u003eWill these foot pegs fit my Surron Light Bee or Eride Pro?\u003c\/h3\u003e\n\n\u003cp\u003eYes — these pegs are made to match the mounting standards used on Surron Light Bee X (LBX) and several Eride Pro versions. Fitment also covers a range of CRF and XR models as noted in the product listing, though some older or specialized bikes may require a different shaft or adapter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit: Surron Light Bee X\/LBX, Light Bee S\/LBS\u003c\/li\u003e\n  \u003cli\u003eEride Pro models: SS, S, SR\u003c\/li\u003e\n  \u003cli\u003eCompatible Honda\/Kawasaki models: CRF150F, CRF230F, CRF250F, XR150L, XR125L, X160\/X260, KDX200\u003c\/li\u003e\n  \u003cli\u003eVerify your peg shaft diameter before ordering for non-listed models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these pegs improve traction and control?\u003c\/h3\u003e\n\n\u003cp\u003eThe JFG RACING pegs combine a wide platform with aggressive stainless steel screw-tooth pins that bite into boot soles to reduce slip. A larger contact area spreads rider weight for better balance while the hardened pins maintain traction in mud, rock, and loose surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtra-wide platform for more stable footing\u003c\/li\u003e\n  \u003cli\u003eStainless steel tooth pins for lasting anti-slip performance\u003c\/li\u003e\n  \u003cli\u003ePin pattern differs left\/right (15 vs. 16 pins) for fast orientation\u003c\/li\u003e\n  \u003cli\u003eAnodized finish reduces corrosion and maintains grip texture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are these pegs made of and will they hold up to rough use?\u003c\/h3\u003e\n\n\u003cp\u003eFabricated from CNC-machined 7075 aluminum, these pegs are both lightweight and strong—7075 is commonly used where high strength-to-weight ratio matters. The anodized surface helps prevent oxidation and fading, while the screw-in stainless pins resist bending or shearing under normal off-road stresses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined 7075 aluminum body — high strength, low weight\u003c\/li\u003e\n  \u003cli\u003eDurable anodize resists corrosion and wear\u003c\/li\u003e\n  \u003cli\u003eReplaceable stainless steel pins minimize long-term maintenance\u003c\/li\u003e\n  \u003cli\u003eSold without springs to match many OEM mounting systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose left and right pegs, and are pins replaceable?\u003c\/h3\u003e\n\n\u003cp\u003eThe pegs are intentionally manufactured with a different number of pins for the left and right units—one side has 15 pins, the other 16—so you can distinguish them quickly during installation. The stainless steel screw-tooth pins are individually secured, making pin replacement or servicing straightforward if pins wear or get damaged.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAsymmetric pin count (15 vs. 16) for easy side ID\u003c\/li\u003e\n  \u003cli\u003eIndividual screw-in pins allow targeted replacement\u003c\/li\u003e\n  \u003cli\u003eNo included springs — use OEM springs or aftermarket equivalents\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs on mounting hardware for secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These JFG RACING pegs are aimed at electric dirt bike riders and off-road enthusiasts who want a stronger, wider platform with superior traction for technical riding, aggressive cornering, or day-long trail sessions. They’re a solid upgrade for Surron Light Bee and compatible CRF\/XR\/KDX models when you want reduced slippage, improved stability, and a durable, lightweight component that stands up to harsh riding conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these pegs include springs and mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the pegs are sold without springs. Use your OEM springs or compatible aftermarket springs; mounting bolts depend on your bike model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace individual pins if they wear out?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the stainless steel screw-tooth pins are individually replaceable for easy maintenance and long-term grip performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67587698917561,"sku":"B091781T24","price":81.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-installed-on-surron-front-view.jpg?v=1790514984"},{"product_id":"jfg-racing-dirt-bike-hand-guards-for-7-8-22mm-1-1-8-28mm-bars-6061-aluminum-core-pp-shield","title":"JFG RACING Dirt Bike Hand Guards for 7\/8\" (22mm) \u0026 1 1\/8\" (28mm) Bars — 6061 Aluminum Core, PP Shield","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING Dirt Bike Hand Guards are universal protective guards that fit 7\/8\" (22mm) and 1 1\/8\" (28mm) handlebars, combining 6061 aluminum strength with a PP plastic shield for impact and element protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese hand guards are built to keep your hands safer and your controls neater across dirt bikes, pit bikes, enduro rigs, e-bikes, scooters, ATVs and many street motorcycles. The design balances rigid aluminum mounting with a flexible polymer outer shield to absorb knocks from brush, stones and minor crashes while providing room for throttle cables and brake lines. A cut-out profile trims weight and gives a clean, modern look that complements both performance and style-focused riders.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these guards protect my hands while riding?\u003c\/h3\u003e\n\u003cp\u003eThe combination of a 6061 aluminum inner structure and a polypropylene (PP) outer shield offers both rigidity and impact resilience. That pair deflects branches and debris and cushions light impacts during tip-overs without transferring the full force to your hands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum core resists bending under force to keep bars protected.\u003c\/li\u003e\n  \u003cli\u003ePP shield flexes to absorb strikes from rocks and brush.\u003c\/li\u003e\n  \u003cli\u003eCovers throttle and brake areas to reduce direct hits to hands.\u003c\/li\u003e\n  \u003cli\u003eActs as a buffer during minor drop events, reducing blunt contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my handlebars and control cables?\u003c\/h3\u003e\n\u003cp\u003eYes—these guards are made to mount on standard 7\/8\" (22mm) and 1 1\/8\" (28mm) bars with adapters included for a secure fit. The internal space accommodates most brake lines and throttle cables without crowding, and the profile can help route lines for a tidier appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes clamp options for 22mm and 28mm diameters.\u003c\/li\u003e\n  \u003cli\u003eSpacious inner cavity for brake and throttle lines.\u003c\/li\u003e\n  \u003cli\u003eMounting hardware holds guards steady through rough terrain.\u003c\/li\u003e\n  \u003cli\u003eNeater cable routing reduces snag risk and cluttered bars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes are used, and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe mounting backbone is CNC-machined 6061 aluminum for reliable structural support while the outer shield is molded polypropylene for impact flexibility and weather resistance. This mix keeps weight low, improves durability, and maintains appearance under regular off-road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 aluminum: lightweight, corrosion-resistant, and strong.\u003c\/li\u003e\n  \u003cli\u003ePP plastic shield: resists cracking and flexes on impact.\u003c\/li\u003e\n  \u003cli\u003eCut-out design reduces mass and enhances airflow around bars.\u003c\/li\u003e\n  \u003cli\u003eHardware designed to withstand vibration and off-road loads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do they affect fit and bike styling?\u003c\/h3\u003e\n\u003cp\u003eThe guards have a minimal, cut-out silhouette to preserve the bike’s lines while adding a purposeful, rugged accent. They integrate cleanly with handlebars and can give older bikes a refreshed, performance-oriented appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut-out profile creates a lighter visual and reduces wind drag.\u003c\/li\u003e\n  \u003cli\u003eComplements sport, trail, and utility bike aesthetics.\u003c\/li\u003e\n  \u003cli\u003eAvailable in finishes that match common handlebar colors.\u003c\/li\u003e\n  \u003cli\u003eEasy-to-install clamps keep the look factory-clean and functional.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? JFG RACING hand guards are aimed at riders who frequently encounter off-road obstacles, commuters who want extra protection from wind and debris, and anyone seeking a durable, low-weight upgrade for 22mm or 28mm handlebars. They work well for dirt bikers, enduro riders, pit bike users, e-bike and scooter owners, and ATV riders who need reliable bar protection and cleaner cable routing without heavy bulk.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these hand guards fit 22mm and 28mm handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—JFG RACING guards come with hardware to mount on both 7\/8\" (22mm) and 1 1\/8\" (28mm) bars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the guards interfere with brake or throttle cables?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—the internal space accommodates common brake and throttle lines and can help tidy cable routing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67588024729785,"sku":"B073LJV4K1","price":85.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-hand-guards.jpg?v=1790516141"},{"product_id":"jfg-racing-dirt-bike-handguards-for-7-8-1-1-8-bars-black-aluminum-mounts-impact-resistant-pp-shells","title":"JFG RACING Dirt Bike Handguards for 7\/8\" \u0026 1-1\/8\" Bars — Black Aluminum Mounts, Impact-Resistant PP Shells","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING Dirt Bike Handguards are universal-fit aluminum-and-PP guards that shield hands, levers and cables on 7\/8\" (22mm) and 1-1\/8\" (28mm) handlebars for off-road motorcycles, ATVs and pit bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to fit a wide range of dirt and trail bikes, these handguards combine a rigid aluminum mounting system with impact-resistant polypropylene shells to block rocks, branches, rain and wind. They install using standard tools and include the brackets and hardware to fasten to common handlebar diameters without cutting or welding. Designed for motocross, enduro, ATV and supermoto use, the assembly balances protection with low weight so controls stay responsive.\u003c\/p\u003e\n\n\u003ch3\u003eWill these handguards fit my bike's handlebars?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit is engineered to clamp to the two most common off-road handlebar sizes: 7\/8\" (22mm) and 1-1\/8\" (28mm). The package contains adapters and mounting brackets so you can attach to either bar diameter without modifying the handlebars.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes adapters for 22mm and 28mm bars\u003c\/li\u003e\n  \u003cli\u003eCompatible with many popular models (YZ250F, CRF series, KX250F, DRZ, KLR and similar)\u003c\/li\u003e\n  \u003cli\u003eNo welding or permanent handlebar changes required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow effective are these at protecting hands and controls?\u003c\/h3\u003e\n\u003cp\u003eThe PP shells block gravel, rain and cold wind, protecting skin against impacts and the elements during rides. The aluminum brackets help keep the guard rigid so levers and cables are shielded from branches and accidental scrapes, reducing the chance of damage during a tip-over.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePP plastic outer shield resists chips and punctures\u003c\/li\u003e\n  \u003cli\u003eAluminum mounts provide stable, anti-shake support\u003c\/li\u003e\n  \u003cli\u003eBuffers lever and cable contact during falls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these handguards durable and lightweight for off-road use?\u003c\/h3\u003e\n\u003cp\u003eThe combination of a light PP guard with high-strength aluminum brackets gives a durable setup that doesn’t add unnecessary bulk. The plastics are chosen for impact resistance and hardness, while the metal components keep the assembly secure under vibration and rough terrain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePP shell for long-term abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy hardware for strength and low weight\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist shaking and loosening on bumpy trails\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and intended for DIY fitment using common hand tools. The kit ships with the necessary brackets, bolts and spacers so you can mount the guards without aftermarket machining or specialized presses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAll mounting hardware included in the kit\u003c\/li\u003e\n  \u003cli\u003eRequires only basic maintenance tools (wrenches, Allen keys)\u003c\/li\u003e\n  \u003cli\u003eCan be installed in a short shop session or at the trailhead\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders who spend time on trails, in motocross, or on utility ATVs and want a durable, universal and lightweight barrier to protect their hands and the bike’s control components. If you ride where branches, flying debris, or cold crosswinds are common, and you want a bolt-on solution that fits most off-road bars — this kit is made for that use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these handguards fit 7\/8\" and 1-1\/8\" handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes adapters to fit both 22mm (7\/8\") and 28mm (1-1\/8\") handlebars without permanent modification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What materials are used for protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The shield is made from impact-resistant PP plastic and the mounts are high-strength aluminum alloy for durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67588102783161,"sku":"B07DXVKMVJ","price":82.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-handguards.jpg?v=1790516502"},{"product_id":"jfg-racing-electric-dirt-bike-throttle-for-sur-ron-light-bee-x-s-x160-x260-black-6061-aluminum-rolling-bearing","title":"JFG RACING Electric Dirt Bike Throttle for Sur Ron Light Bee X\/S, X160\/X260 — Black 6061 Aluminum, Rolling Bearing","description":"\u003cstrong\u003eJFG RACING's replacement throttle handle for Sur Ron Light Bee and X-series bikes is a compact 6061 aluminum and nylon kit built to deliver smoother rotation and steadier speed control.\u003c\/strong\u003e\n\n\u003cp\u003eIf you ride a Sur Ron Light Bee X or S (2017–2024), X160 or X260 and need a reliable, low-profile throttle upgrade, this kit replaces the factory unit with a black-anodized throttle, cable, and grip. The design focuses on tactile consistency: a rolling bearing reduces friction for more predictable roll-in and roll-out, while the aluminum\/nylon construction balances durability and rider comfort. The kit is a direct-fit, simple replacement intended for riders who want a cleaner look and a more controlled throttle feel without changing handlebar geometry.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the rolling bearing change throttle feel on trails?\u003c\/h3\u003e\n\u003cp\u003eThe incorporated rolling bearing reduces binding and uneven resistance, producing a smoother rotational motion as you open and close the throttle. That steady action minimizes jumpy throttle responses during fine inputs, making it easier to modulate power through corners or technical climbs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother rotation for incremental inputs\u003c\/li\u003e\n  \u003cli\u003eConsistent resistance reduces rider fatigue over long sessions\u003c\/li\u003e\n  \u003cli\u003eImproves repeatability on tight or technical lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this throttle fit my Sur Ron Light Bee X, S, X160 or X260?\u003c\/h3\u003e\n\u003cp\u003eYes — the throttle kit is designed for direct fitment with Sur Ron Light Bee X (2017–2024), Light Bee S (2017–2024), X160 and X260 models. The package includes the throttle assembly, a matching throttle cable, and the handle, so installation is straightforward for most riders familiar with basic controls work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Light Bee X and S models from 2017–2024\u003c\/li\u003e\n  \u003cli\u003eCompatible with Sur Ron X160 and X260\u003c\/li\u003e\n  \u003cli\u003eComes with throttle, cable, and handle for plug-and-play replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish are used, and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe throttle uses 6061 aluminum combined with nylon components to balance strength and tactile comfort. The aluminum provides structural rigidity where needed, while nylon helps absorb slight vibrations and improves grip feel. An all-black finish keeps the look subtle and pairs well with darker bars and accessories.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 aluminum for durable, lightweight structure\u003c\/li\u003e\n  \u003cli\u003eNylon parts for reduced vibration and improved hand comfort\u003c\/li\u003e\n  \u003cli\u003eMatte black finish for a low-profile, sporty appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this throttle affect throttle control during acceleration and technical maneuvers?\u003c\/h3\u003e\n\u003cp\u003eThe design emphasizes a steady, predictable roll so riders can make fine throttle adjustments without abrupt changes in power. That control helps during acceleration out of corners, clutchless climbs, and when feathering power through obstacles, giving you more confidence in how the bike responds to hand inputs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteady roll for precise acceleration and deceleration\u003c\/li\u003e\n  \u003cli\u003eBetter modulation when navigating technical terrain\u003c\/li\u003e\n  \u003cli\u003eReduces abrupt power spikes from inconsistent throttle movement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This throttle kit suits Sur Ron owners who want a dependable, low-profile control upgrade—riders focused on smoother hand inputs, cleaner cockpit aesthetics, and simple, direct-fit replacements. It’s ideal for trail riders, commuters, and light off-road enthusiasts who value consistent throttle feedback without altering core bike ergonomics.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this throttle kit include the cable and handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package includes one throttle assembly, one throttle cable, and one throttle handle for direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this on a Sur Ron Light Bee X 2019 myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most mechanically inclined riders can install it with basic tools; follow standard control removal and cable routing procedures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67588187685049,"sku":"B0BN3D1GD9","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-throttle-front-view_a2d23a5e-8573-41b5-934e-325a2045faf5.jpg?v=1790517020"},{"product_id":"jfg-racing-dirt-bike-handguards-for-7-8-1-1-8-bars-impact-resistant-pp-shields-aluminum-mounts","title":"JFG RACING Dirt Bike Handguards for 7\/8\" \u0026 1-1\/8\" Bars — Impact-Resistant PP Shields \u0026 Aluminum Mounts","description":"\u003cstrong\u003eThese JFG RACING dirt bike handguards are universal handlebar shields that protect hands, levers and cables from debris, branches and wind for 7\/8\" (22mm) and 1-1\/8\" (28mm) handlebars.\u003c\/strong\u003e\n\n\u003cp\u003eIf you ride off-road or commute on motorcycles with exposed controls, a sturdy pair of handguards reduces knocks, blocks flying gravel, and cuts wind chill—without heavy modification. JFG RACING designed this kit to fit most 22mm and 28mm bars, combining impact-resistant PP plastics with high-strength aluminum alloy mounts for a balance of lightness and durability.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these handguards attach to different handlebars?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes clamps and hardware that adapt to both 7\/8\" (22mm) and 1-1\/8\" (28mm) bars, so you can install them on many motocross and dual-sport bikes without custom parts. Brackets lock the guard to the bar and a reinforced connecting piece keeps the assembly stable under rough riding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes adjustable clamp pieces for 22mm and 28mm bars\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy bracket resists bending and reduces vibration\u003c\/li\u003e\n  \u003cli\u003eStandard hand tools required—no welding or bar modification\u003c\/li\u003e\n  \u003cli\u003eComplete hardware pack for left and right installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these handguards protect my levers and cables in trail riding?\u003c\/h3\u003e\n\u003cp\u003eYes—these guards create a protective barrier around levers, cables and switchgear to limit scratches and blunt impacts from branches or falls. The PP plastic shield absorbs and disperses many small impacts, helping to avoid damage that can leave controls inoperable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCurved shield profile channels impacts away from controls\u003c\/li\u003e\n  \u003cli\u003eSturdy mounts keep guards in place during minor crashes\u003c\/li\u003e\n  \u003cli\u003eHelps prevent cable abrasion and lever bending from brush\u003c\/li\u003e\n  \u003cli\u003eActs as a buffer if the bike slides across rocks or dirt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these guards help with weather and comfort while riding?\u003c\/h3\u003e\n\u003cp\u003eBeyond impact protection, the shields reduce direct wind on your hands and block spray and grit that can make cold-weather rides uncomfortable. By diverting airflow and road spray, the guards can help keep hands dryer and slightly warmer without bulky gloves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePP plastic deflects rain, mud and small stones\u003c\/li\u003e\n  \u003cli\u003eReduces wind chill across grips and levers\u003c\/li\u003e\n  \u003cli\u003eImproves comfort on longer rides or in wet weather\u003c\/li\u003e\n  \u003cli\u003eDoes not interfere with throttle or clutch operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and maintenance-friendly are these handguards?\u003c\/h3\u003e\n\u003cp\u003eThe combination of high-hardness PP plastic and aluminum alloy components gives a long service life with low upkeep. If you drop the bike, the shields take much of the force; replaceable hardware and a simple clamp design make repairs or swaps easy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePP plastic resists cracking and sand abrasion\u003c\/li\u003e\n  \u003cli\u003eAluminum brackets prevent twisting and maintain alignment\u003c\/li\u003e\n  \u003cli\u003eHardware is standard-sized for easy parts replacement\u003c\/li\u003e\n  \u003cli\u003eQuick removal for cleaning or service on controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who want a lightweight, universal handguard solution—motocross racers, trail riders, dual-sport commuters and anyone using 22mm or 28mm handlebars. Choose JFG RACING handguards if you need dependable protection for levers and cables, improved hand comfort in poor weather, and an easy-to-install kit that won’t demand custom tools or permanent modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these handguards fit my 22mm handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes clamps compatible with 7\/8\" (22mm) handlebars and installs using common tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can they protect levers if I drop the bike?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They provide a buffer that reduces direct impact to levers and cables, lowering the chance of damage in minor drops.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67588435542201,"sku":"B07DXRSR6M","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-handguards_71d3ecbb-5715-4428-ad1b-b347c60940de.jpg?v=1790518780"},{"product_id":"jfg-racing-dirt-bike-hand-guards-universal-7-8-1-1-8-22-28mm-6061-aluminum-core-pp-shield","title":"JFG RACING Dirt Bike Hand Guards Universal 7\/8\" 1 1\/8\" (22\/28mm) — 6061 Aluminum Core \u0026 PP Shield","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING Dirt Bike Hand Guards are universal protective shields that mount to 7\/8\" (22mm) and 1 1\/8\" (28mm) handlebars to protect hands, controls, and cables during off-road and street riding.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for riders who want dependable hand protection without complex installation, these hand guards combine a lightweight 6061 aluminum core with a resilient PP plastic outer shield. The double-layered top section increases impact resistance, while the universal clamp hardware fits most dirt bikes, pit bikes, enduros, e-bikes, scooters and ATVs with standard handlebar diameters. They provide a practical blend of strength, cable accommodation and weather blocking so your hands and controls stay safer and cleaner on trail, commute or track.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these hand guards fit different handlebars?\u003c\/h3\u003e\n\u003cp\u003eThe JFG RACING guards include mounting clamps sized for the two most common diameters used on motorcycles and similar vehicles. Adapters and bolts are provided so you can install them on either 7\/8\" (22mm) or 1 1\/8\" (28mm) bars without specialized tools. The clamps secure the aluminum backbone while the plastic shield covers brake and clutch lines, giving a snug, vibration-resistant fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes hardware for 22mm and 28mm handlebar diameters\u003c\/li\u003e\n  \u003cli\u003eClamp-on installation using standard hex tools\u003c\/li\u003e\n  \u003cli\u003eDesigned to leave room for control cables and brake lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials make these hand guards durable?\u003c\/h3\u003e\n\u003cp\u003eDurability comes from a hybrid construction: a 6061 aluminum internal structure provides stiffness and impact resistance, while a polypropylene (PP) outer shield absorbs hits and resists abrasion. The top section is built with a double-layer design to reinforce the most exposed area for extra protection against rocks, branches and knocks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 aluminum core for lightweight strength\u003c\/li\u003e\n  \u003cli\u003ePP plastic shield that resists cracks and scratches\u003c\/li\u003e\n  \u003cli\u003eDouble-layered top increases force distribution on impact\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these guards protect controls and cables?\u003c\/h3\u003e\n\u003cp\u003eThe hand guards are shaped to cover brake and clutch levers, offering a buffer against branches, flying debris and curious obstacles. There’s ample clearance for routing cables and hydraulic lines, and the shields can also tuck modest cable sections to create a tidier handlebar appearance. They reduce spray and wind exposure for better hand comfort and cleaner controls.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWraps around levers to reduce direct impacts\u003c\/li\u003e\n  \u003cli\u003eRoom for brake and clutch lines without pinching\u003c\/li\u003e\n  \u003cli\u003eShields block mud, stones and cold wind from hands and controls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is it to install and maintain them?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and intended for DIY riders. The clamp-on system and included fasteners fit most common bars; basic hand tools like Allen keys and a ratchet are sufficient. Maintenance is minimal: wipe the PP shield clean and check clamp torque periodically. Replace any bent or damaged fasteners after a heavy impact to preserve fit and safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick clamp installation — no welding required\u003c\/li\u003e\n  \u003cli\u003ePeriodic cleaning with mild soap and water\u003c\/li\u003e\n  \u003cli\u003eInspect and tighten bolts after rough rides\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These JFG RACING hand guards suit riders who want versatile, durable protection for off-road and on-road use — from weekend trail riders and pit-bike racers to commuters on scooters or e-bikes. If you use 22mm or 28mm handlebars and want a lightweight guard that shields levers, manages cables and stands up to impacts, these guards are a practical upgrade. They’re especially useful for anyone who encounters brush, loose rocks, cold wind or frequent urban debris and wants a reliable, easy-to-fit solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these hand guards fit my 22mm dirt bike handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes clamps and hardware compatible with 7\/8\" (22mm) handlebars for straightforward clamp-on installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the guards accommodate brake and clutch lines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The design provides ample room for routing brake and clutch cables without pinching, keeping controls functional.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67588844388537,"sku":"B07M9TKZ6L","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-packaging-hand-guard.jpg?v=1790526331"},{"product_id":"jfg-racing-foldable-clutch-brake-levers-for-kawasaki-kx65-kx85-kx100-kx250-6061-aluminum-anodized-gloss","title":"JFG RACING Foldable Clutch \u0026 Brake Levers for Kawasaki KX65\/KX85\/KX100\/KX250 — 6061 Aluminum, Anodized Gloss","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING foldable clutch and brake levers are lightweight, anodized 6061 aluminum replacements designed to fold outward on impact and fit a wide range of Kawasaki KX models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese levers are engineered as direct bolt-on replacements for multiple KX motocross models and model years, giving riders a stronger yet lighter control option with a glossy anodized finish. Built from aircraft-grade 6061 aluminum, the parts combine improved durability with reduced weight. The foldable design minimizes the chance of permanent damage in a crash by bending outward instead of snapping, and the anodized surface adds corrosion resistance plus a sharp look that resists fading.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Kawasaki models and years will these levers work with?\u003c\/h3\u003e\n\u003cp\u003eThey are designed to fit many KX-series bikes without modification. Confirm compatibility by matching your bike model and year to the list below before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKX65: 2000–2024\u003c\/li\u003e\n  \u003cli\u003eKX85: 2001–2024\u003c\/li\u003e\n  \u003cli\u003eKX100: 2001–2021\u003c\/li\u003e\n  \u003cli\u003eKX125: 2000–2005\u003c\/li\u003e\n  \u003cli\u003eKX250: 2000–2004\u003c\/li\u003e\n  \u003cli\u003eKX250F: 2004\u003c\/li\u003e\n  \u003cli\u003eKX112: 2022–2024\u003c\/li\u003e\n  \u003cli\u003eKX500: listed model compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the foldable levers protect my bike in a crash?\u003c\/h3\u003e\n\u003cp\u003eThe levers are engineered to pivot outward on impact rather than remain rigid, which reduces stress concentrations that cause breakage. The outward-fold mechanism uses a joint that lets the lever swing away, preserving the master cylinder and perch.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOutward-fold action lowers the chance of snapped levers.\u003c\/li\u003e\n  \u003cli\u003eReplaceable pivot and bolt design for easy maintenance.\u003c\/li\u003e\n  \u003cli\u003eReduces repair costs after tipovers or slides.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish are used, and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThese components are milled from 6061 aluminum, a common choice for motorcycle controls because it balances high tensile strength with light weight. After machining the levers receive an anodic oxidation finish that increases surface hardness and gives a long-lasting, glossy color that resists chipping and corrosion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 aluminum — strong but lightweight for better handling.\u003c\/li\u003e\n  \u003cli\u003eAnodized coating — durable finish and color retention.\u003c\/li\u003e\n  \u003cli\u003ePrecision machining for consistent feel and fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and will I need extra tools or mods?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward: these levers are made as direct replacements for the stock parts so no cutting or drilling is required. Basic hand tools are sufficient; adjust bolts to dial in lever position and control feel after mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design — no permanent modifications needed.\u003c\/li\u003e\n  \u003cli\u003eStandard sockets and Allen keys required for installation.\u003c\/li\u003e\n  \u003cli\u003eSimple adjustment of pivot bolts to customize reach and feel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders who own compatible Kawasaki KX models and want a reliable, attractive upgrade to their control levers. These levers suit racers and weekend trail riders seeking lighter components with improved crash resilience and a clean, anodized appearance. If you value straightforward installation, reduced replacement costs after tip-overs, and a better hand-feel under braking and clutching, these levers are an economical performance-focused choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these levers require modifications to fit my KX?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modifications are needed; they are direct replacements for the listed KX models and years.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material are the levers made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are CNC machined from 6061 aluminum with an anodized finish for strength and corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67589679612089,"sku":"B06Y3T5D72","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-packaging.jpg?v=1790531239"},{"product_id":"jfg-racing-electric-dirt-bike-twist-throttle-for-surron-79bike-nylon-faster-response","title":"JFG RACING Electric Dirt Bike Twist Throttle for Surron \u0026 79Bike — Nylon, Faster Response","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING's electric dirt bike twist throttle is a plug-and-play replacement that restores smooth, responsive acceleration for compatible Surron, 79Bike and similar e-bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis upgraded nylon twist throttle is designed for direct fitment on a range of electric dirt bikes including Surron Light Bee X\/S, Light Bee S, 79Bike Falcon models, and several clones. It combines a lighter, impact-resistant construction with a faster electronic response so your acceleration feels more precise and controlled. A few models (Tuttio Soleil, Eride Pro and Macfox) may need minor trimming or wiring adjustments for a clean install.\u003c\/p\u003e\n\n\u003ch3\u003eWill this throttle work with my Surron or 79Bike model?\u003c\/h3\u003e\n\u003cp\u003eThe JFG RACING throttle is engineered to match OEM dimensions for many popular electric dirt bikes. Most Surron Light Bee and 79Bike Falcon variants accept it as a direct swap; some third-party bikes require small modifications. Always compare connector types and handlebar diameters before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit: Surron Light Bee X and Light Bee S, 79Bike Falcon Pro\/Gt\u003c\/li\u003e\n  \u003cli\u003eCompatible with: Tuttio Soleil 01, Eride Pro S\/SS\/SR, Macfox — minor trimming or wiring may be needed\u003c\/li\u003e\n  \u003cli\u003eConnector check: verify plug type and wiring layout for plug-and-play install\u003c\/li\u003e\n  \u003cli\u003eHandlebar size: confirm clamp\/diameter compatibility before mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the nylon construction change performance and durability?\u003c\/h3\u003e\n\u003cp\u003eThe throttle housing and grip use a reinforced nylon blend that reduces weight while improving abrasion and impact resistance. That material resists cracking from falls and stays dimensionally stable under vibration, so the assembly lasts longer in off-road conditions. Riders notice a firmer feel without added bulk.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight nylon lowers rotating inertia for easier throttle movement\u003c\/li\u003e\n  \u003cli\u003eHigh hardness improves impact resistance from drops and debris\u003c\/li\u003e\n  \u003cli\u003eWear-resistant surface retains grip texture through heavy use\u003c\/li\u003e\n  \u003cli\u003eStable construction reduces play and improves long-term fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat ride improvements should I expect after installation?\u003c\/h3\u003e\n\u003cp\u003eOnce installed, the electronic valve and smoother rotation deliver quicker, more predictable throttle response. That translates into cleaner acceleration transitions and better control in technical terrain. The change can also help you apply power more efficiently, which may feel like improved ride quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFaster, more linear throttle response from the upgraded electronics\u003c\/li\u003e\n  \u003cli\u003eSmoother hand rotation for precise power modulation\u003c\/li\u003e\n  \u003cli\u003eReduced lag when returning to idle or spooling up acceleration\u003c\/li\u003e\n  \u003cli\u003eComfort improvements from ergonomic grip shape and lighter weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the install and what tools or modifications are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward for direct-fit bikes: remove the old grip and plug in the new unit. For some less common models, minimal trimming of the grip sleeve or simple wiring adaptation may be necessary. Basic hand tools and a multimeter are usually sufficient for a safe install.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play for Surron and 79Bike-compatible models\u003c\/li\u003e\n  \u003cli\u003eTuttio Soleil, Eride Pro, Macfox may require minor trimming or wiring changes\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: hex keys, screwdriver, wire crimpers, electrical tape\u003c\/li\u003e\n  \u003cli\u003eTest with a multimeter before final reassembly to confirm wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who want a dependable, lightweight replacement throttle for Surron and similar electric dirt bikes will benefit most from the JFG RACING twist throttle. It's ideal for off-road enthusiasts seeking sharper, more consistent acceleration and a durable grip housing that stands up to rough use. If you have a nonstandard clone model, plan for a small amount of trimming or wiring work to complete the upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this throttle fit Surron Light Bee without modification?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is a direct replacement for Surron Light Bee X and S models with plug-and-play installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need tools or wiring changes to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installs need only basic hand tools; Tuttio Soleil, Eride Pro, and Macfox models may need minor trimming or wiring adjustments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67589805801657,"sku":"B0CXDDW6M9","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-throttle.jpg?v=1790532240"},{"product_id":"jfg-racing-rear-brake-rotor-for-surron-light-bee-x-s-lbx-x160-x260-203mm-steel-vented-for-cooling","title":"JFG RACING Rear Brake Rotor for Surron Light Bee X\/S LBX X160 X260 — 203mm Steel, Vented for Cooling","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING's rear brake rotor is a 203mm steel replacement disc engineered to fit Surron Light Bee X, Light Bee S, LBX, X160 and X260 models for improved durability and cooling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you ride a Surron Light Bee family electric dirt bike and want a reliable, serviceable rear brake disc, this JFG RACING steel rotor is sized and shaped for direct fitment on several Light Bee variants. The rotor combines a porous, vented surface with corrosion-resistant steel to disperse water and dirt, reduce heat buildup and deliver consistent braking performance on trail, track or street-adjacent riding.\u003c\/p\u003e\n\n\u003ch3\u003eWill this rotor fit my Surron Light Bee model?\u003c\/h3\u003e\n\u003cp\u003eThe rotor is designed specifically for many Light Bee platforms — including Light Bee X, Light Bee S, LBX, X160 and X260 — with a 203mm overall diameter. Always confirm your existing rotor diameter and bolt pattern before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Surron Light Bee X, Light Bee S, LBX, X160, X260\u003c\/li\u003e\n  \u003cli\u003e203mm diameter; check your bike’s current rotor size\u003c\/li\u003e\n  \u003cli\u003eMatch bolt hole pattern to your wheel hub for proper installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the porous design affect braking and heat?\u003c\/h3\u003e\n\u003cp\u003eThe rotor’s porous and vented profile helps channel air and dissipate heat faster than a solid disc, lowering thermal stress during repeated braking. This design also sheds mud and water, helping the pads re-establish bite more quickly after wet or dirty sections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePorous layout improves airflow and cooling under heavy use\u003c\/li\u003e\n  \u003cli\u003eChannels water and debris away from the pad contact area\u003c\/li\u003e\n  \u003cli\u003eReduces chances of brake fade on extended descents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat material and build quality should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis rotor is manufactured from hardened steel intended to resist cracking and slow the onset of surface corrosion compared with softer metals. The construction balances strength and wear resistance for everyday trail use without expensive exotic alloys.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade of durable steel for impact and wear resistance\u003c\/li\u003e\n  \u003cli\u003eEngineered for low deformation under normal loads\u003c\/li\u003e\n  \u003cli\u003eSurface treatments help resist rust and extend service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this rotor affect noise and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe ventilated pattern and precise machining help minimize squeal and vibration by improving pad seating and ventilation. The open design also makes cleaning easier—mud and grime disperse more readily, so routine maintenance is quicker.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLower braking noise through improved ventilation and pad contact\u003c\/li\u003e\n  \u003cli\u003eEasy to rinse and clean after muddy rides\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on replacement for routine service or upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who own a Surron Light Bee X, Light Bee S, LBX, X160 or X260 and need an affordable, robust rear rotor replacement or spare. It suits daily trail riders, commuters who face wet\/dirty conditions, and anyone seeking a straightforward steel disc with improved cooling and easier cleaning versus older solid rotors. Verify the 203mm diameter and bolt pattern match your hub before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this rotor the correct size for my Light Bee?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This rotor is 203mm and fits Light Bee X, Light Bee S, LBX, X160 and X260; confirm your existing rotor diameter and bolt pattern first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this rotor in wet or muddy conditions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the porous design disperses water and dirt, improving pad contact and braking after wet or muddy sections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67590048448697,"sku":"B0BC93JBFS","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-rear-rotor-front-view.jpg?v=1790533437"},{"product_id":"jfg-racing-klx110-cnc-folding-shift-lever-green-anodized-t6-6061-lightweight-durable","title":"JFG RACING KLX110 CNC Folding Shift Lever, Green Anodized T6-6061 Lightweight Durable","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING's CNC-machined folding shift lever is a direct-fit, anodized replacement for KLX110, KLX110L and KLX110R (2010–2023) that combines lightweight T6-6061 aluminum construction with a foldable toe for impact protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aftermarket shifter is built to replace the stock lever on KLX110 family bikes without modification. Machined from aircraft-grade T6-6061 aluminum, then CNC-finished and anodized in green, it provides a low-weight, corrosion-resistant upgrade. The foldable tip reduces breakage risk during knocks or falls, while the OEM-specific dimensions make installation straightforward for riders wanting a reliable, long-lasting gear lever.\u003c\/p\u003e\n\n\u003ch3\u003eWill this shift lever fit my KLX110 model?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the lever is specifically modeled for KLX110, KLX110L and KLX110R model years 2010 through 2023. JFG RACING used an original bike to set the mold and ensure the mounting hole positions and lever length match factory geometry. You won’t need to bend or modify the shift linkage to install it.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFitment: KLX110, KLX110L, KLX110R (2010–2023)\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on replacement using the factory alignment hole\u003c\/li\u003e\n  \u003cli\u003eNo special tools or frame modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the foldable tip protect the lever during off-road use?\u003c\/h3\u003e\n\n\u003cp\u003eThe toe of the lever pivots inward on impact instead of snapping, reducing costly replacement needs after crashes or heavy contact with obstacles. This sacrificial bending action preserves the main lever body while the replaceable tip collapses under load. It’s a simple mechanical way to extend the lever’s useful life in rough riding conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFoldable toe absorbs impacts to prevent main lever breakage\u003c\/li\u003e\n  \u003cli\u003ePivot design allows tip retraction on heavy contact\u003c\/li\u003e\n  \u003cli\u003eEasy to replace tip reduces repair costs after falls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and surface treatments make this lever durable?\u003c\/h3\u003e\n\n\u003cp\u003eThe lever is machined from T6-6061 aluminum alloy, chosen for its high strength-to-weight ratio and resistance to fatigue. After CNC machining, an anodized finish provides a protective oxide layer that resists wear, corrosion and fading while giving the bike a vivid green accent. Together these processes create a durable, attractive component for daily riding or trail use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eT6-6061 aluminum for light weight and structural strength\u003c\/li\u003e\n  \u003cli\u003eCNC machining for precise fit and smooth edges\u003c\/li\u003e\n  \u003cli\u003eAnodized surface for corrosion and wear resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be straightforward: remove the stock shifter, align the new lever on the pivot using the factory mounting hole, and secure with the original hardware. Because the lever was shaped using a real KLX110 as reference, alignment and throw should closely match the OEM feel. Riders can typically complete the swap with basic hand tools in minutes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSwap replaces original lever using factory bolt and hole\u003c\/li\u003e\n  \u003cli\u003eRequires basic tools; no welding or linkage adjustment expected\u003c\/li\u003e\n  \u003cli\u003ePreserves stock shifting geometry and lever length\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders of Kawasaki KLX110 variants (2010–2023) who want a lightweight, visually striking replacement shifter with enhanced impact tolerance. It suits youth riders, trail and pit bike enthusiasts, and anyone who prefers durable aluminum parts with easy fitment and low maintenance. Choose this lever if you want a practical upgrade that improves resilience without compromising OEM ergonomics.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this lever fit all KLX110 years?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits KLX110, KLX110L and KLX110R models from 2010 through 2023 as a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the tip replaceable after folding?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The foldable tip is designed to collapse on impact and can be replaced separately if needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67590048514233,"sku":"B0BRMYL185","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-green-shift-lever.jpg?v=1790533440"},{"product_id":"jfg-racing-motorcycle-carbon-fiber-fork-wrap-boots-250mm-pair-heat-resistant-abrasion-protection","title":"JFG RACING Motorcycle Carbon Fiber Fork Wrap Boots 250mm — Pair, Heat‑Resistant Abrasion Protection","description":"\u003cstrong\u003eJFG RACING Motorcycle Carbon Fiber Fork Wrap Boots are a pair of 250mm fork covers designed to protect and dress up front forks on most on- and off-road motorcycles and dirt bikes.\u003c\/strong\u003e\n\nThese lightweight carbon fiber fork guards deliver abrasion resistance and a sleek appearance while keeping sand, mud and road debris off your fork tubes. Made from aerospace-style dry carbon fiber, the covers are heat- and erosion-resistant, washable, and shaped to wrap the fork legs. Multiple lengths are offered so you can pick the size closest to your fork dimensions; the 250mm option protects a long stretch of the fork lower for extra coverage and visual continuity.\n\n\u003ch3\u003eHow do these fork wraps protect my bike?\u003c\/h3\u003e\n\u003cp\u003eThe covers form a durable outer layer that shields fork tubes from pebbles, grit and grime that cause pitting and premature wear. By diverting abrasive material away from seals and slider surfaces they reduce the need for frequent cleaning and maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlocks debris that chips or scratches fork stanchions\u003c\/li\u003e\n  \u003cli\u003eReduces dust build-up around seals and dust boots\u003c\/li\u003e\n  \u003cli\u003eWashable surface for easy post-ride cleaning\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant material for hot-climate durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my motorcycle forks?\u003c\/h3\u003e\n\u003cp\u003eJFG RACING offers a wide selection of lengths so you can match the wrap to most on- and off-road motorcycle fork sizes. The product is sold as a pair and fits many dirt bikes, but you may need to trim or clip the upper parts to install on some fork designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAvailable lengths from 140mm up to 260mm, including 250mm\u003c\/li\u003e\n  \u003cli\u003eIntended for most off-road and motocross forks; check fork exposed length before ordering\u003c\/li\u003e\n  \u003cli\u003eUpper\/lower fork guard configurations possible — order additional sets if both are needed\u003c\/li\u003e\n  \u003cli\u003eInstallation may require minor trimming for upper-guard applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these made and what performance can I expect?\u003c\/h3\u003e\n\u003cp\u003eConstructed from dry carbon fiber, the wraps combine a high strength-to-weight ratio with surface toughness. Expect a lightweight protector that maintains its look after exposure to dirt and weather while resisting abrasion and moderate impacts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAerospace-grade dry carbon fiber for strength and low weight\u003c\/li\u003e\n  \u003cli\u003eHigh temperature and erosion resistance for extended service life\u003c\/li\u003e\n  \u003cli\u003eFlexible connection points for conforming to fork contours\u003c\/li\u003e\n  \u003cli\u003eSold as a pair; no installation instructions included in the package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: These fork wrap boots suit riders who want both functional protection and a premium carbon fiber look on their dirt bike or off-road motorcycle. They are ideal for motocross and enduro enthusiasts aiming to guard fork tubes from trail debris, and for anyone updating fork aesthetics. If you need complete coverage for both upper and lower fork sections, consider ordering two sets and prepare for minor trimming when fitting upper guards. The 250mm length is geared toward riders seeking extended lower-fork coverage without adding significant weight.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fork wraps fit my dirt bike forks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit most on\/off-road motorcycle forks; measure exposed fork length and choose the closest available size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation difficult and are instructions included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Installation is straightforward but may need minor clipping; no installation instructions are provided with the package.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67590181257401,"sku":"B0CHS16844","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-fork-wraps.jpg?v=1790533876"},{"product_id":"jfg-racing-dirt-bike-foot-pegs-for-honda-cr-crf-kawasaki-kx-6061-aluminum-stainless-pins","title":"JFG RACING Dirt Bike Foot Pegs for Honda CR\/CRF \u0026 Kawasaki KX – 6061 Aluminum, Stainless Pins","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING dirt bike foot pegs are CNC-machined 6061-aluminum replacement pegs engineered for aggressive grip and wide fitment across CR\/CRF\/KX Honda and Kawasaki models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese foot pegs are a direct-fit performance upgrade designed for riders who want stronger traction, durable anodized surfaces, and easy visual identification between left and right pegs. Manufactured from 6061 aluminum and finished with a hard-anodize coat, they resist corrosion and retain color under dirt and weather. Integrated stainless-steel tooth pins deliver bite for boots in wet, muddy, or high-vibration conditions, while the asymmetric pin count (one peg with 15 pins, the other with 16) helps you quickly tell left from right without affecting performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models and years do these JFG RACING pegs fit?\u003c\/h3\u003e\n\u003cp\u003eThese pegs cover a broad range of Honda and Kawasaki motocross and dual-sport models. Fitment spans many CR, CRF, KX, KLX, and Africa Twin variants across multiple production years. Always cross-check your specific model year and mounting style before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHonda CR125\/CR250: 2002–2011\u003c\/li\u003e\n  \u003cli\u003eCRF150R\/CRF250R\/CRF450R ranges: 2004–2024 (varies by model)\u003c\/li\u003e\n  \u003cli\u003eCRF250X\/RX, CRF300L\/RALLY, CRF450RX\/X\/L\/RL, CRF250L\/M\/RALLY and Africa Twin CRF1000\/1100 series: selected years noted above\u003c\/li\u003e\n  \u003cli\u003eKawasaki KX250F\/KX250\/KX450F\/KX450\/KX250X\/KX450X and KLX450R: selected year ranges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these pegs improve grip and rider control?\u003c\/h3\u003e\n\u003cp\u003eThe pegs use aggressive stainless-steel screw-tooth pins embedded into the aluminum body to increase traction under varied terrain. Their wide platform and sharp teeth help lock your boots in place during cornering, jumps, and technical sections, reducing foot slippage and improving confidence.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless-steel pins provide durable, replaceable bite points.\u003c\/li\u003e\n  \u003cli\u003eWide platform disperses pressure for better balance and control.\u003c\/li\u003e\n  \u003cli\u003eSharp, evenly spaced teeth shed mud for consistent traction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the build quality and finish like?\u003c\/h3\u003e\n\u003cp\u003eConstructed from CNC-machined 6061 aluminum, these pegs offer precise tolerances and a uniform anodized surface that resists oxidation and fading. The anodizing not only adds corrosion resistance but also gives a clean, race-ready look that stands up to regular cleaning and aggressive riding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 aluminum body for strength-to-weight balance.\u003c\/li\u003e\n  \u003cli\u003ePrecision CNC machining ensures consistent fit and function.\u003c\/li\u003e\n  \u003cli\u003eHard anodize finish prevents color loss and surface oxidation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy are the left and right pegs different and does that matter?\u003c\/h3\u003e\n\u003cp\u003eThe pegs are intentionally produced with a different number of pins—one side has 15 pins and the other 16—to make left\/right identification quick and intuitive. This distinction is purely for identification and does not affect fitment or performance; both pegs provide equivalent grip and structural strength.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAsymmetric pin counts aid fast left\/right recognition during install.\u003c\/li\u003e\n  \u003cli\u003eBoth pegs deliver the same traction and durability in use.\u003c\/li\u003e\n  \u003cli\u003eDesign choice simplifies maintenance and reduces assembly errors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey features at a glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many Honda CR\/CRF and Kawasaki KX\/KLX models (see detailed fitment).\u003c\/li\u003e\n  \u003cli\u003eCNC-machined 6061 aluminum construction with anodized finish.\u003c\/li\u003e\n  \u003cli\u003eStainless-steel screw-tooth pins for strong skid control and anti-slip grip.\u003c\/li\u003e\n  \u003cli\u003eLeft and right pegs have different pin counts (15 vs 16) for easy identification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders who race, trail-ride, or tour on CR\/CRF and compatible KX\/KLX machines and want an affordable, durable upgrade to their foot controls. Ideal for motocross competitors seeking better boot traction, dual-sport riders who face mud and varied conditions, and mechanics who prefer precision CNC components that match factory mounting points. If you value stronger grip, corrosion resistance, and a clear left\/right installation cue, these JFG RACING pegs are built for you.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these pegs fit my CRF250R?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—JFG RACING pegs fit many CRF250R model years from 2004–2024; verify your year and mount type before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the stainless pins replaceable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The stainless-steel screw-tooth pins are serviceable; you can remove and replace individual pins if they wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67590462505145,"sku":"B07BQN5K28","price":79.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-peg-assembly.jpg?v=1790534731"},{"product_id":"jfg-racing-portable-motorcycle-stand-lift-adjustable-9-65-15-75-height-485-lb-capacity-compact-pocket-sized","title":"JFG RACING Portable Motorcycle Stand Lift — Adjustable 9.65–15.75\" Height, 485 lb Capacity, Compact Pocket-Sized","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING's universal portable motorcycle stand lift is a compact, lever-assisted jack that raises your bike for 360° chain cleaning, wheel maintenance, and emergency roadside support.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis lightweight, pocket-sized lifting tool replaces bulky paddock stands by letting solo riders rotate the rear or front wheel for quick service in tight garages or while on the road. Designed around a heavy-duty press lever and a textured spherical base, it provides stable, slip-resistant support and an included brake-holder buckle to prevent handle snap-back during work or transport.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the press lever make lifting a motorcycle easier?\u003c\/h3\u003e\n\u003cp\u003eThe built-in press lever uses mechanical advantage so a simple downward push translates into a powerful upward lift, reducing physical strain. No extra tools or strength are required — even heavier bikes can be elevated smoothly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eArchimedes-style compression rod multiplies force for effortless lifting\u003c\/li\u003e\n  \u003cli\u003eQuick operation: lift a wheel in seconds with a single-hand push\u003c\/li\u003e\n  \u003cli\u003eWorks on both rear and front wheels for versatile servicing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this stand fit my bike and how much weight can it handle?\u003c\/h3\u003e\n\u003cp\u003eThe stand offers a verified adjustable height range and substantial load capacity to suit a wide range of motorcycles. Measurements and capacities are real-world tested to match common cruisers, sport bikes, naked bikes and adventure models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable height: 9.65\" to 15.75\" (24.5–40 cm)\u003c\/li\u003e\n  \u003cli\u003eSingle-side load capacity: 485 lbs (220 kg)\u003c\/li\u003e\n  \u003cli\u003eCompatible with most rear or front wheel setups for routine maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and useful is it for emergency roadside repairs?\u003c\/h3\u003e\n\u003cp\u003eWeighing just over a pound and folding down to a compact length, this lift is designed to travel with you. It fits under seats or in tool bags and includes a brake-holder for safe, single-person operation during tire changes or chain tasks on the road.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight: 1.2 lbs and pocket-sized when collapsed (8.6 inches)\u003c\/li\u003e\n  \u003cli\u003eIncludes high-strength front brake holder buckle to lock brakes securely\u003c\/li\u003e\n  \u003cli\u003eIdeal for remote self-rescue and quick roadside adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow stable is the stand on different surfaces?\u003c\/h3\u003e\n\u003cp\u003eThe base combines an aggressive rubber pad with a spherical pivot to adapt to uneven floors and grip smooth concrete. Together these features build a stable three-point contact with your bike’s side stand, minimizing slip and drift when you work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti-slip high-damping rubber pad resists movement on tile, concrete, and asphalt\u003c\/li\u003e\n  \u003cli\u003eSpherical pivot joint automatically conforms to slopes for flush contact\u003c\/li\u003e\n  \u003cli\u003eCreates a safety triangle with the side stand for reliable support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who need a genuinely portable, tool-free lift for routine chain lubrication, wheel cleaning, tire repairs, or emergency roadside use will benefit most. It’s especially useful for solo riders, adventure travelers, commuters with limited storage, and anyone wanting a compact, reliable alternative to large paddock stands. Keep one in your tool kit for quick maintenance sessions or as a dependable backup on long trips.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this lift hold my sport bike safely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the adjustable range (9.65\"–15.75\") and 485 lb (220 kg) single-side capacity fit most sport and street bikes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to operate the press lever?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the built-in press lever raises the wheel with a simple downward push, no extra tools required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67590525681849,"sku":"B0916YBXPZ","price":77.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-stand-front-view.jpg?v=1790534935"},{"product_id":"jfg-racing-ignition-key-switch-cover-for-surron-light-bee-x160-anodized-silver-cnc-6061-aluminum-trim","title":"JFG RACING ignition key switch cover for Surron Light Bee\/X160 — anodized silver CNC 6061 aluminum trim","description":"\u003cstrong\u003eJFG RACING's ignition key switch cover is a CNC-machined 6061 aluminum trim piece that fits Surron Light Bee and X series bikes to tidy the ignition area with an anodized silver finish.\u003c\/strong\u003e\n\n\u003cp\u003eIf you want a small, durable upgrade that cleans up the look around your electric dirt bike's ignition without altering the stock switch, this precision-cut cover is designed for Surron Light Bee X, Light Bee S, X160 and X260 models. It slips around the existing key switch to mask the exposed edges and wiring while matching the bike's metallic components with a consistent silver anodized surface.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover improve the bike's appearance?\u003c\/h3\u003e\n\u003cp\u003eThe cover provides a finished bezel around the ignition switch, removing rough edges and bare mounting areas that can make the cockpit look unfinished. Its uniform anodized surface reflects light consistently and pairs visually with other aluminum parts on the bike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMachined 6061 aluminum for a clean, metal look\u003c\/li\u003e\n  \u003cli\u003eAnodized silver finish for uniform shine and color matching\u003c\/li\u003e\n  \u003cli\u003eDesigned to sit around, not replace, the original ignition switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the cover affect how the ignition switch functions?\u003c\/h3\u003e\n\u003cp\u003eNo electrical or mechanical components are changed by installing this cover; it is a cosmetic trim piece only. The part is formed to fit around the existing switch so access and operation of the key remain the same.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDoes not modify wiring or switch mechanism\u003c\/li\u003e\n  \u003cli\u003eMaintains full key access and rotation clearance\u003c\/li\u003e\n  \u003cli\u003eInstalled externally — reversible and non-invasive\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and finish characteristics?\u003c\/h3\u003e\n\u003cp\u003eThe cover is CNC-machined from 6061 aluminum, chosen for strength, light weight and corrosion resistance. An anodized surface treatment adds wear-resistant color and a smooth tactile finish that resists minor scratches and keeps the silver tone consistent over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 aluminum body with precise CNC tolerances\u003c\/li\u003e\n  \u003cli\u003eAnodized coating for color stability and surface protection\u003c\/li\u003e\n  \u003cli\u003eEdge-finished to avoid sharp contacts with the key or rider\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and what’s included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with small motorcycle trim parts, typically requiring only removal of the old bezel or clearing the switch area before sliding the cover into place. The package contains one ignition key switch cover; no installation instructions or tools are included, so basic hand tools and care are recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes: 1 ignition key switch cover as pictured\u003c\/li\u003e\n  \u003cli\u003eNo instructions supplied — basic fitting skills helpful\u003c\/li\u003e\n  \u003cli\u003eNon-destructive installation that preserves the original switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who own a Surron Light Bee X or S, X160 or X260 and want a subtle, durable visual upgrade to the ignition area. It’s ideal for riders who prefer OEM-style enhancements that don’t alter electrical systems, plus customizers who value precision-machined aluminum trim to match other billet components on their electric dirt bikes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Surron models does this cover fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Surron Light Bee X, Light Bee S, X160 and X260 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation change the ignition switch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — it’s a cosmetic trim piece that sits around the original switch without altering function.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67590684541113,"sku":"B0BS3NS221","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-key-cover-front-view.jpg?v=1790535708"},{"product_id":"jfg-racing-electric-dirt-bike-brake-pads-for-surron-lbx-lbs-front-rear-2-pcs-heat-resistant-quiet-stopping","title":"JFG RACING Electric Dirt Bike Brake Pads for Surron LBX \u0026 LBS - Front \u0026 Rear 2 pcs, Heat-Resistant Quiet Stopping","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING front and rear brake pads are a direct-fit two-piece replacement designed specifically for Surron Light Bee models and compatible electric dirt bikes, delivering quieter stops, improved heat resistance, and long-lasting friction performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese brake pads are engineered for electric off-road bikes such as the Surron Light Bee X (LBX) and Light Bee S (LBS), plus several Talaria and X-series models. They combine reinforced friction material and thermal stability so riders get consistent braking on trail and street without accelerated rotor wear. Simple installation with basic hand tools makes them a practical replacement for routine maintenance or upgrades.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these pads improve braking feel and noise compared to stock parts?\u003c\/h3\u003e\n\u003cp\u003eThe compound blends high-strength fibers and binder to reduce squeal and provide a predictable bite under varying loads. Riders will notice a smoother initial engagement and quieter operation without aggressive glazing that can harm rotors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduced squeal thanks to dampening properties in the material\u003c\/li\u003e\n  \u003cli\u003eSmoother modulation for better rider control at low speeds\u003c\/li\u003e\n  \u003cli\u003eFormulated to avoid premature glazing that reduces effectiveness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these pads handle heat during aggressive riding or long descents?\u003c\/h3\u003e\n\u003cp\u003eYes — the pads are built with reinforced friction elements to increase thermal stability and resist fade during extended use. That helps maintain consistent stopping power on longer runs while protecting pad integrity under high-temperature conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnhanced thermal resistance for sustained braking performance\u003c\/li\u003e\n  \u003cli\u003eMaterial reinforcement reduces breakdown from repeated heat cycles\u003c\/li\u003e\n  \u003cli\u003eDesigned to preserve friction characteristics at elevated temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich bike models and mounting positions do these pads fit?\u003c\/h3\u003e\n\u003cp\u003eThese pads are intended as replacement front and rear pads for a range of electric dirt bikes. They match the fit and geometry for Surron Light Bee X (LBX), Light Bee S (LBS), Talaria Sting MX3\/R MX4, and the X160\/X260 series for straightforward swap-in installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Surron Light Bee X (LBX) and Light Bee S (LBS)\u003c\/li\u003e\n  \u003cli\u003eWorks with Talaria Sting MX3 and Sting R MX4 models\u003c\/li\u003e\n  \u003cli\u003eAlso fits X160 and X260 model calipers as listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is quick and requires only common hand tools; no specialty equipment or machining is necessary. The package contains two brake pads — one set for a single wheel position — and does not include installation instructions, so refer to your service manual or a mechanic if unsure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple swap using standard hand tools in minutes\u003c\/li\u003e\n  \u003cli\u003ePackage includes 2 pieces (single paired set)\u003c\/li\u003e\n  \u003cli\u003eNo installation guide included — consult bike manual if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who own Surron Light Bee series or compatible Talaria\/X-series electric dirt bikes and want a reliable, quieter replacement pad with better heat resistance than many stock options. These pads suit weekend trail riders, commuters using off-road-capable ebikes, and anyone doing routine brake service who prefers an easy, bolt-on swap without extra tooling. If you need OEM-specific fitment for a different model, check caliper compatibility before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these pads compatible with both front and rear calipers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This two-piece set is designed for front and rear use on the listed Surron and compatible models, matching the original caliper fitment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these pads need any special bedding-in procedure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; a standard bedding routine of gradual stops after installation is recommended for best performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67591156170937,"sku":"B09KLQRXC1","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-rear-packaging.jpg?v=1790542616"},{"product_id":"jfg-racing-dirt-bike-handguards-for-7-8-1-1-8-bars-6061-aluminum-spine-impact-resistant-pp-shield","title":"JFG RACING Dirt Bike Handguards for 7\/8\" \u0026 1 1\/8\" Bars — 6061 Aluminum Spine, Impact-Resistant PP Shield","description":"\u003cb\u003eJFG RACING Dirt Bike Handguards are universal-fit hand shields made from 6061 aluminum and PP plastic to protect hands and controls on 7\/8\" and 1 1\/8\" handlebars.\u003c\/b\u003e\n\n\u003cp\u003eThese handguards combine a lightweight 6061 aluminum backbone with a molded PP plastic shield to give riders durable protection without excessive weight. Designed for a wide range of off-road and street-style machines — including dirt bikes, pit bikes, enduros, e-bikes, scooters and ATVs — they fit both 7\/8\" and 1 1\/8\" bars. The assembly leaves room for cables and brake lines while tidying their appearance and offering a buffer in low-speed drops and brushy terrain.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these handguards mount to different handlebar diameters?\u003c\/h3\u003e\n\u003cp\u003eThe JFG RACING handguards include hardware and clamp designs that adapt to standard 7\/8\" (22 mm) and oversized 1 1\/8\" (28 mm) handlebars. Installation uses the supplied brackets and bolts; no permanent modifications are required for most bikes. The clamps seat around the bar and secure the aluminum backbone and plastic shield to keep the guard aligned under vibration and impact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes adaptable clamp hardware for 22 mm and 28 mm bars\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on fit with common hand tools\u003c\/li\u003e\n  \u003cli\u003eDesigned to clear lever travel and control cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection do these guards provide on trails and streets?\u003c\/h3\u003e\n\u003cp\u003eThese guards act as a barrier against brush, stones, flying debris and cold wind, helping keep hands and lever assemblies shielded during rides. In the event of a tip-over, the aluminum backbone absorbs and disperses impact forces while the PP shield prevents scratches and blocks incoming debris. They are built to withstand repeated use without adding heavy bulk to your bars.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum spine for impact resistance and rigidity\u003c\/li\u003e\n  \u003cli\u003ePP plastic shield resists cracking and abrasion\u003c\/li\u003e\n  \u003cli\u003eMaintains lever clearance for safe braking and shifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these handguards work with my brake and clutch lines?\u003c\/h3\u003e\n\u003cp\u003eThe design leaves adequate space to route brake and clutch lines without pinching, and can help tidy loose cables for a cleaner look. There is room behind the shield to position hoses and wiring neatly; in some setups the guard can act as an extra guide for lines. Always double-check that controls have full travel and aren’t constrained before every ride.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRoom for brake and clutch lines behind the shield\u003c\/li\u003e\n  \u003cli\u003eHelps organize cables for a neater cockpit\u003c\/li\u003e\n  \u003cli\u003eCheck lever movement after installation for safe operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are the materials and how should I maintain them?\u003c\/h3\u003e\n\u003cp\u003eThe backbone uses aircraft-grade 6061 aluminum for strength and lightness, while the outer shield is molded from impact-resistant polypropylene to absorb strikes and abrasions. Routine maintenance is minimal: wipe the shields clean after muddy rides, inspect mounting bolts for tightness, and replace damaged hardware if bent. The materials resist corrosion and UV degradation under normal riding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 aluminum spine for long-lasting structural support\u003c\/li\u003e\n  \u003cli\u003ePP plastic shield resists impact and surface wear\u003c\/li\u003e\n  \u003cli\u003eSimple cleaning and fastener checks keep performance reliable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders looking for a versatile, bolt-on handguard solution that fits both standard and oversized handlebars — from trail and enduro riders to commuters and e-bike users who want hand and control protection without heavy or complex installation. Ideal if you need a balance of toughness, lightweight construction, and tidy cable management on 7\/8\" or 1 1\/8\" bars.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these handguards fit 22mm and 28mm handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They include clamps and hardware to fit both 7\/8\" (22 mm) and 1 1\/8\" (28 mm) handlebars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install them myself with basic tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Installation is bolt-on with common tools; check lever travel and tighten fasteners after mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67591184220345,"sku":"B0773DBCG7","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-mounted.jpg?v=1790543270"},{"product_id":"jfg-racing-dirt-bike-handguards-for-7-8-1-1-8-bars-aluminum-mounts-impact-resistant-pp-shield","title":"JFG RACING Dirt Bike Handguards for 7\/8\" \u0026 1 1\/8\" Bars — Aluminum Mounts, Impact-Resistant PP Shield","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING Dirt Bike Handguards are universal protective guards that fit 7\/8\" and 1 1\/8\" handlebars, combining 6061 aluminum strength with PP plastic shields to protect hands and controls off-road.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese handguards are engineered for riders who want durable, lightweight protection for dirt bikes, pit bikes, enduros, e-bikes, scooters and ATVs with standard 7\/8\" or 1 1\/8\" bars. The construction pairs anodized 6061 aluminum mounting brackets with impact-resistant PP outer shields, offering a balanced solution that shields hands from brush, rocks and wind while leaving space for cables and brake lines. Installation is straightforward and the guards are sized to suit most standard handlebars—check the measurements to confirm fit for your model.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes these handguards sturdy enough for trail and street riding?\u003c\/h3\u003e\n\u003cp\u003eThe core mounting components use 6061 aluminum, chosen for its high strength-to-weight ratio and corrosion resistance. The outer shield is molded PP plastic designed to absorb impacts and resist abrasion, so the assembly stands up to frequent off-road use without adding excessive weight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 aluminum brackets for secure clamping and longevity\u003c\/li\u003e\n  \u003cli\u003ePP plastic shields that resist chips, scrapes and UV exposure\u003c\/li\u003e\n  \u003cli\u003eCompact 300 × 120 × 80 mm profile for good protection without bulk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these handguards fit my bike and controls?\u003c\/h3\u003e\n\u003cp\u003eThey are built to fit handlebars with 7\/8\" (22 mm) and 1 1\/8\" (28.6 mm) diameters using included mounting hardware or clamp adapters. The interior area provides room for brake lines, clutch cables and electrical wiring so you can route lines safely while keeping a tidy cockpit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal clamps accommodate both 7\/8\" and 1 1\/8\" bars\u003c\/li\u003e\n  \u003cli\u003eRoom behind the shield for cables and brake lines\u003c\/li\u003e\n  \u003cli\u003eHardware designed to keep lines secure and out of harm's way\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do handguards protect me during a ride or a tip-over?\u003c\/h3\u003e\n\u003cp\u003eOn the trail they deflect brush, rocks and mud that would otherwise hit your hands; in windy conditions they help block cold gusts. If the bike falls or strikes an obstacle, the guards act as a buffer to absorb some of the force before it reaches levers or hands, helping reduce damage and maintain control systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeflects debris and reduces direct hits to the hands\u003c\/li\u003e\n  \u003cli\u003eBuffers impacts to levers and controls in a tip-over\u003c\/li\u003e\n  \u003cli\u003eImproves comfort in wind and cold conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I check fit and install these handguards?\u003c\/h3\u003e\n\u003cp\u003eStart by confirming your handlebar diameter (7\/8\" or 1 1\/8\"). The product dimensions are 300 mm × 120 mm × 80 mm—measure clearance for hand position and controls. Installation typically requires basic tools and takes under an hour; follow the included instructions to align the shields and secure clamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify handlebar diameter and measure clearance before ordering\u003c\/li\u003e\n  \u003cli\u003eSimple clamp-and-bolt installation with common hand tools\u003c\/li\u003e\n  \u003cli\u003eAllow space for brake and clutch lever travel during setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders who want a durable, lightweight hand protection upgrade—whether you ride motocross, enduro, trail, street or use an e-bike, scooter or ATV—will find these guards a practical addition. They suit anyone seeking to protect hands and controls from trail debris, reduce the chance of lever damage in a fall, and tidy cable routing, as long as the dimensions and handlebar diameter match the vehicle. Always verify fitment with your model before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these handguards fit my 7\/8\" handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these handguards are designed for 7\/8\" (22 mm) bars and include clamps to secure the fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do they allow room for brake lines and cables?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—there is ample space behind the shield to route brake lines, clutch cables and wiring neatly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67591184285881,"sku":"B0773DRLKT","price":79.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-profile-handguards.jpg?v=1790543269"},{"product_id":"jfg-racing-atv-gas-cap-cnc-billet-aluminum-red-direct-fit-for-trx400ex-trx450r-trx700xx-anodized-vent-hose","title":"JFG RACING ATV Gas Cap CNC Billet Aluminum Red — Direct Fit for TRX400EX\/TRX450R\/TRX700XX, Anodized Vent Hose","description":"\u003cstrong\u003eHigh-quality CNC-machined JFG RACING billet aluminum gas cap that replaces the factory cap on TRX400EX, TRX450R and TRX700XX ATVs for a lighter, more durable fill cover.\u003c\/strong\u003e\n\n\u003cp\u003eThis replacement fuel tank cap from JFG RACING is engineered from 6061-T6 billet aluminum and finished with an anodized surface to resist corrosion while adding a bold red accent to your ATV. It’s a direct-fit aftermarket part for Honda TRX models listed below, offering a lighter, performance-oriented alternative to the stock plastic cap. The cap arrives fully machined and ready to install — no extra parts required thanks to the integrated vent hose.\u003c\/p\u003e\n\n\u003ch3\u003eWill this gas cap fit my ATV model?\u003c\/h3\u003e\n\u003cp\u003eThe JFG RACING cap is compatible with Honda TRX400EX (1999–2014), TRX450R (2004–2009), and TRX700XX (2008–2009). It was designed as a replacement for the OEM fuel cap for those model years and installs in the factory tank opening with no body modification required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for TRX400EX Sportrax 400 (1999–2014)\u003c\/li\u003e\n  \u003cli\u003eDirect fit for TRX450R (2004–2009)\u003c\/li\u003e\n  \u003cli\u003eDirect fit for TRX700XX (2008–2009)\u003c\/li\u003e\n  \u003cli\u003eIncludes integrated vent hose — no separate purchase needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this cap made and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eManufactured from T6-6061 aerospace-grade aluminum, the cap is precision-cut on CNC equipment to ensure consistent dimensions and a snug seal. Anodizing provides a wear-resistant oxide layer that improves corrosion resistance and keeps the red finish looking sharp under off-road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction: CNC-machined 6061-T6 billet aluminum\u003c\/li\u003e\n  \u003cli\u003eFinish: anodized oxide film for surface durability\u003c\/li\u003e\n  \u003cli\u003eBenefits: lightweight, corrosion-resistant, and long-lasting\u003c\/li\u003e\n  \u003cli\u003eDesign details: polygonal face and cut edges for improved grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance or practical advantages does this cap offer over the OEM cap?\u003c\/h3\u003e\n\u003cp\u003eCompared with common OEM plastic fuel caps, this billet aluminum cap is lighter than many steel alternatives and more robust than molded parts, reducing the chance of cracking or warping. The knurled polygon edge improves hand traction when refueling, and the integrated breathing hose maintains proper venting without extra fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLightweight performance upgrade to OEM caps\u003c\/li\u003e\n  \u003cli\u003eImproved durability against impacts and wear\u003c\/li\u003e\n  \u003cli\u003eEnhanced grip for easier opening and closing\u003c\/li\u003e\n  \u003cli\u003eBuilt-in vent hose for correct tank breathing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: remove your factory cap and thread the JFG RACING cap into the tank opening. The cap ships with the vent hose attached; no installation instructions are provided, but no special tools or modifications are required for normal replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 1 JFG RACING gas fuel tank cap cover\u003c\/li\u003e\n  \u003cli\u003eNo installation instructions included — simple hand-thread replacement\u003c\/li\u003e\n  \u003cli\u003eNo additional matching breathing hose needed\u003c\/li\u003e\n  \u003cli\u003eFits standard OEM tank threads for listed TRX models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who want a durable, attractive replacement fuel cap for compatible Honda TRX ATVs — racers, trail riders, and restorers who prefer a machined aluminum piece over the stock plastic cap. Choose this JFG RACING red billet cap if you value a lightweight upgrade, corrosion resistance, improved grip, and a plug-and-play fit for TRX400EX, TRX450R, or TRX700XX models.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this JFG RACING cap come with a vent hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the cap includes an integrated breathing hose so no additional hose is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this replace the OEM cap on my TRX450R?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits TRX450R model years 2004–2009 and installs in the factory tank opening.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67591424934073,"sku":"B0CH12FQRY","price":62.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-atv-gas-cap-front-view.jpg?v=1790550639"},{"product_id":"jfg-racing-electric-dirt-bike-ignition-key-switch-for-surron-light-bee-x-lbx-2-position-aluminum-includes-2-keys","title":"JFG RACING electric dirt bike ignition key switch for Surron Light Bee X LBX — 2-position aluminum, includes 2 keys","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING's electric dirt bike ignition key switch is a lightweight 2-position (ON\/OFF) aluminum lock kit engineered to fit Surron Light Bee X, LBX and Light Bee S models and includes two lock bodies plus two keys.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a direct, low-weight replacement ignition switch for your Surron Light Bee family bike, this JFG RACING kit provides a compact, machined-aluminum lock body and matching keys for basic ON\/OFF control. It’s a simple hardware swap meant to restore keyed ignition functionality using robust 6061 aluminum components. Installation is straightforward for mechanically inclined riders, though minor connector pin adjustments may be required to match your factory wiring harness.\u003c\/p\u003e\n\n\u003ch3\u003eWill this switch physically fit my Surron Light Bee X or LBX?\u003c\/h3\u003e\n\u003cp\u003eThe JFG RACING kit is manufactured to match the common mounting and electrical layout of Surron Light Bee X, LBX and Light Bee S models. It replaces the factory ignition lock using similar bolt patterns and connector orientation. Always compare the existing lock body and connector to the photos and dimensions before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Surron Light Bee X, LBX, Light Bee S models\u003c\/li\u003e\n  \u003cli\u003eMounts in the OEM ignition location with standard fasteners\u003c\/li\u003e\n  \u003cli\u003eIncludes two lock bodies and two keys for spares or second bike\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the materials and durability expectations?\u003c\/h3\u003e\n\u003cp\u003eThis ignition switch kit uses 6061 aluminum for the lock housings, chosen for a balance of strength and light weight. The aluminum resists deformation under normal riding conditions, but like any external component should be protected from heavy impacts. Keys and internal tumblers follow typical small-ignition hardware standards; treat them with normal care to avoid bending.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLock bodies: 6061 aluminum for strength without excess weight\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined for consistent key operation\u003c\/li\u003e\n  \u003cli\u003eTwo keys included to reduce risk of lockout\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and electrical connection?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally moderate: remove the original lock, bolt in the replacement, and connect the wiring harness. In some Surron units you may need to move pins within the connector to match the switch’s terminals; this is a common step and requires only basic tools and patience. The kit does not include step-by-step printed instructions, so a service manual or online guide is helpful if you’re not experienced.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic mechanical removal and bolt-in replacement\u003c\/li\u003e\n  \u003cli\u003ePossible connector pin reconfiguration may be required\u003c\/li\u003e\n  \u003cli\u003eNo printed instructions included; refer to model wiring diagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and what should I plan for?\u003c\/h3\u003e\n\u003cp\u003eEach purchase contains two machined lock bodies and two keys, providing a complete ignition swap plus a spare. You should plan to have small hand tools, a connector pin tool or tiny pick set for any wiring adjustments, and optional thread locker for mounting hardware. The package is meant as a direct hardware replacement rather than a full electrical harness conversion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage: 2 lock bodies, 2 matching keys\u003c\/li\u003e\n  \u003cli\u003eInstallation tools: screwdriver set, socket wrench, connector pin tool recommended\u003c\/li\u003e\n  \u003cli\u003eInstruction sheet not included — use online manuals if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This JFG RACING ignition key switch kit is aimed at Surron Light Bee X, LBX and Light Bee S owners who need a durable, lightweight replacement ignition lock with spare keys. It’s suited to riders and mechanics comfortable with basic motorcycle electrical work who want a reliable, machined-aluminum alternative to worn or damaged factory switches. If you prefer plug-and-play wiring with guided instructions, budget extra time for connector pin checks or have a shop handle the final electrical matching.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include keys?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package contains two lock bodies and two matching keys.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need to rewire my bike?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually not, but you may need to reposition connector pins to match your bike’s wiring harness.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67591654703289,"sku":"B09LS4NKK8","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-lock-kit.jpg?v=1790556977"},{"product_id":"jfg-racing-folding-cnc-gear-shifter-for-50-125cc-dirt-bikes-red-anodized-6061-aluminum-with-spring-fold-tip","title":"JFG RACING Folding CNC Gear Shifter for 50–125cc Dirt Bikes — Red, Anodized 6061 Aluminum with Spring Fold Tip","description":"\u003cb\u003eJFG RACING’s Folding CNC Gear Shifter is a lightweight, anodized 6061 aluminum replacement lever with a spring-loaded folding tip designed to protect the shifter when the bike tips over.\u003c\/b\u003e\n\n\u003cp\u003eThis precision-machined shift lever is built for small-displacement dirt and pit bikes (50cc–125cc) and many Chinese-brand models. CNC 3D texture milling, anodized color options, and a reinforced 45# steel tooth insert combine lightweight performance with improved durability. The foldable tip uses an internal high-strength spring so the tip rebounds instead of breaking during impacts, and the knurled shift head improves grip for confident gear changes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the folding tip protect the shift lever during falls?\u003c\/h3\u003e\n\u003cp\u003eThe folding tip pivots on a spring-loaded head that allows the toe to swing upward on impact, absorbing energy instead of transmitting it to the lever body. Because the spring returns the tip to position, you don’t have to replace the whole lever after a slide.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength steel wire spring inside the shift head for rebound action\u003c\/li\u003e\n  \u003cli\u003eFold-back design prevents permanent bending or breakage\u003c\/li\u003e\n  \u003cli\u003eKnurled tip surface maintains foot traction when shifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this shifter fit my pit bike or dirt bike model?\u003c\/h3\u003e\n\u003cp\u003eThe lever is engineered as a universal fit for most 50cc–125cc pit and mini dirt bikes, including many common Chinese-brand models and OEM-style mounts. It installs like a stock part and uses a 45# steel tooth insert in the mounting hole for wear resistance, so no additional modification is typically required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with XR50, CRF50, XR70, CRF70, XR110, CRF110 and many pit bike brands\u003c\/li\u003e\n  \u003cli\u003eOEM-style dimensions for straightforward installation\u003c\/li\u003e\n  \u003cli\u003e45# steel tooth insert reduces wear at the pivot point\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes are used for strength and appearance?\u003c\/h3\u003e\n\u003cp\u003eThis shifter combines a 6061-T6 aluminum body with iron and steel components in high-stress areas to balance weight and durability. An anodized surface treatment and laser-etched \"JFG RACING\" logo give a corrosion-resistant finish with aftermarket style.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 aluminum alloy CNC-machined body for light weight and rigidity\u003c\/li\u003e\n  \u003cli\u003eSurface oxidation\/anodized color options (red, black, blue, gold, silver)\u003c\/li\u003e\n  \u003cli\u003eLaser-marked brand logo and textured 3D milling for grip and looks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and how long will it last?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward because the lever mimics OEM sizing and requires no special modifications. The combination of wear-resistant steel inserts, anodized protection, and solid construction extends usable life compared with brittle cast or untreated stock levers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement fit for most 50–125cc pit bikes, no major mods\u003c\/li\u003e\n  \u003cli\u003eDurable parts (45# steel teeth, 6061 aluminum) for long-term use\u003c\/li\u003e\n  \u003cli\u003eQuick swap with basic hand tools — instruction sheet not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who want a stronger, lighter, and better-looking shift lever for mini and pit bikes — especially off-road enthusiasts who need a folding tip to avoid breakage after drops. It’s ideal for hobbyists, track-day riders, and anyone upgrading worn stock parts on XR\/CRF-style small-displacement machines or many Chinese-brand dirt bikes. Choose your preferred anodized head color to personalize appearance while improving durability and shifting feel.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit my 110cc pit bike?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely yes — it fits most 50cc–125cc pit bikes. If unsure, compare the OEM shifter mount dimensions or contact the seller with your model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the folding tip be replaced separately?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tip is integrated with a spring-loaded head; individual replacement depends on availability of spare heads from the manufacturer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67591716864185,"sku":"B0B5R865D4","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-gear-shifter-front-view-red.jpg?v=1790558142"},{"product_id":"jfg-racing-dirt-bike-triangle-stand-universal-rear-axle-kickstand-for-80-500cc-powder-coated-steel-t-bar-reinforced","title":"JFG RACING Dirt Bike Triangle Stand — Universal Rear Axle Kickstand for 80–500cc, Powder‑Coated Steel, T‑Bar Reinforced","description":"\u003cb\u003eJFG RACING's Dirt Bike Triangle Stand is a universal, heavy‑duty axle-mounted kickstand designed to support 80cc–500cc dirt bikes, supermotos, motocross and enduro machines for parking and light workshop use.\u003c\/b\u003e\n\n\u003cp\u003eThis compact triangle stand installs on the rear axle in seconds and gives your bike a stable, angled rest without needing the factory kickstand. Built from powder‑coated steel with an internal T‑bar reinforcement, it resists bending and corrosion while providing a higher load capacity than typical temporary stands. The axle-hook design fits most bikes with an axle inner diameter of 11mm or larger, and the tilt is adjustable so you can set a secure parking angle on uneven terrain.\u003c\/p\u003e\n\n\u003ch3\u003eWill this stand fit my motorcycle?\u003c\/h3\u003e\n\u003cp\u003eThe stand is engineered to accommodate a broad range of off‑road and dual‑sport bikes from 80cc through 500cc. Compatibility depends on your rear axle inner hole diameter — it supports 11mm, 14.5mm and 18mm measurements. Before ordering, measure the inner diameter of the axle hole to confirm a proper match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with dirt bike, supermoto, motocross, and enduro models\u003c\/li\u003e\n  \u003cli\u003eCompatible when axle inner diameter ≥ 11mm\u003c\/li\u003e\n  \u003cli\u003eSupports common axle sizes: 11mm, 14.5mm, 18mm\u003c\/li\u003e\n  \u003cli\u003eSingle‑piece design fits quickly without special tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow strong and durable is the construction?\u003c\/h3\u003e\n\u003cp\u003eThe stand is made from heavy‑duty steel and finished with a black powder coat to slow corrosion and stand up to trail use. Inside the body an integrated T‑bar reinforcement distributes load forces more evenly, resulting in about 2.3 times the load capacity of many simple stands. That means less flex and a lower chance of distortion under sustained pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePowder‑coated steel resists rust and chips\u003c\/li\u003e\n  \u003cli\u003eT‑bar reinforcement increases structural integrity\u003c\/li\u003e\n  \u003cli\u003eMeant for repeated use on trails and in garages\u003c\/li\u003e\n  \u003cli\u003eEngineered to minimize warping under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly can I mount and use it on the trail?\u003c\/h3\u003e\n\u003cp\u003eThe axle‑hook instant deployment system lets you mount or remove the stand in under five seconds with a single motion — ideal for quick stops or makeshift repairs. Tilt is adjustable from roughly 15° to 45°, so you can dial in a stable parking angle depending on ground slope and bike geometry. No permanent modifications to the bike are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle‑motion install\/removal in under 5 seconds\u003c\/li\u003e\n  \u003cli\u003e15°–45° adjustable tilt for varied terrain\u003c\/li\u003e\n  \u003cli\u003eTool‑free attachment using the rear axle hook\u003c\/li\u003e\n  \u003cli\u003eUseful for quick trailside checks or parking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan it be used in the workshop as well as on the trail?\u003c\/h3\u003e\n\u003cp\u003eYes — besides functioning as an emergency or temporary kickstand, the triangle stand can stabilize a bike for light workshop tasks and wheel removal. It’s not intended to replace heavy lift equipment but works well for routine maintenance and holding the bike upright while you tighten or inspect components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDoubles as a workshop stabilizer for light jobs\u003c\/li\u003e\n  \u003cli\u003eHelps keep the bike upright for wheel and chain work\u003c\/li\u003e\n  \u003cli\u003eCompact, easy to store in a toolbox or tailbag\u003c\/li\u003e\n  \u003cli\u003eNot a substitute for full lifts or professional stands\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The JFG RACING Dirt Bike Triangle Stand is ideal for off‑road riders, weekend racers and home mechanics who need a fast, dependable way to prop their motorcycle without permanent hardware changes. It’s best suited to riders of 80cc–500cc dirt bikes, supermotos, motocross and enduro machines with compatible axle diameters who want a durable, portable stand for trailside stops and light maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What axle sizes does this stand fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits axle inner diameters of 11mm, 14.5mm and 18mm—measure your bike's axle hole to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the stand for workshop maintenance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it serves as a light workshop stabilizer for wheel and chain tasks but isn't a replacement for heavy lifts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67592750596281,"sku":"B074DVBB18","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-packaging-stand.jpg?v=1790567574"},{"product_id":"jfg-racing-atv-gas-cap-for-yamaha-yfz-450-yfz450r-banshee-350-black-6061-aluminum-anodized-with-sealing-ring","title":"JFG RACING ATV Gas Cap for Yamaha YFZ 450\/YFZ450R\/Banshee 350 — Black 6061 Aluminum, Anodized with Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING's ATV gas cap is a CNC-machined 6061 aluminum replacement fuel cap for multiple Yamaha and ATV models that offers a durable, anodized finish and an integrated sealing ring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a direct-fit, lightweight replacement fuel cap that resists wear and helps prevent leaks after a tip-over, this JFG RACING cap is built for off-road use. It’s anodized for corrosion resistance, machined from aircraft-grade aluminum for strength without excess weight, and includes a rubber sealing ring to reduce fuel seepage.\u003c\/p\u003e\n\n\u003ch3\u003eWill this cap fit my YFZ 450, Banshee, or Raptor?\u003c\/h3\u003e\n\u003cp\u003eThe cap is designed for a wide range of Yamaha and ATV models and installs without modification on compatible tanks. Check your model list before purchasing to confirm thread and mounting match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: YFZ 450, YFZ450R, Banshee 350\/200, Raptor 660\/350\/250\/125\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Warrior 350\/450, Kodiak 400, Grizzly 660\/450\/400\/350\/300, Bruin 350\/250\u003c\/li\u003e\n  \u003cli\u003eDirect-fit installation — no drilling or trimming required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is the cap?\u003c\/h3\u003e\n\u003cp\u003eThis gas cap is machined from 6061 aluminum, an alloy commonly used in motorsports for its strength-to-weight balance. The surface undergoes anodic oxidation (anodizing) to form a protective film that improves corrosion resistance and preserves color under outdoor conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 aluminum body for impact resistance and low weight\u003c\/li\u003e\n  \u003cli\u003eAnodized finish to resist corrosion and fading\u003c\/li\u003e\n  \u003cli\u003ePrecision machining for consistent fit and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the sealing ring stop fuel leaks if the bike falls?\u003c\/h3\u003e\n\u003cp\u003eYes — the cap includes a built-in rubber sealing ring designed to help block fuel outflow if the ATV tips over. While it helps reduce leakage risk, always inspect seals periodically and replace them if worn.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated sealing ring to minimize seepage during a tip-over\u003c\/li\u003e\n  \u003cli\u003eEasy to inspect and replace if degraded\u003c\/li\u003e\n  \u003cli\u003eHelps maintain a tighter fuel system seal when properly installed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the cap to install and maintain?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: this cap is made to match OEM tank openings for the listed models and slides into place without modification. Routine care involves wiping away dirt and checking the sealing ring for cracks or compression.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free or simple-screw installation on compatible tanks\u003c\/li\u003e\n  \u003cli\u003eWipe-clean anodized surface — avoid harsh abrasives\u003c\/li\u003e\n  \u003cli\u003eInspect or replace the rubber seal as part of regular maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and mechanics who want a reliable replacement fuel cap for Yamaha YFZ, Banshee, Raptor and related ATVs that balances durability, weight savings, and leak-mitigation. It suits off-road enthusiasts repairing a damaged or missing cap, riders upgrading to a machined aluminum look, and anyone who prefers a corrosion-resistant, anodized finish. Always confirm model compatibility before ordering and periodically check the cap and sealing ring for wear to maintain a secure fuel closure.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cap a direct replacement for OEM models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s made to fit the listed Yamaha and ATV models without modification; confirm your model before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace the sealing ring if it wears out?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the rubber sealing ring can be inspected and replaced to restore a tight fuel seal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67592752922809,"sku":"B07CPXZ9WG","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-cap_jpg.jpg?v=1790567616"},{"product_id":"jfg-racing-atv-gas-cap-for-yamaha-yfz-450-yfz450r-banshee-raptor-blue-cnc-aluminum-leak-seal","title":"JFG RACING ATV Gas Cap for Yamaha YFZ 450\/YFZ450R\/Banshee\/Raptor — Blue CNC Aluminum, Leak‑Seal","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING’s blue CNC-machined aluminum gas cap replaces stock fuel caps on many Yamaha ATVs, offering a lightweight, durable seal with anodized color.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aftermarket fuel cap is built from 6061 aluminum with an anodized finish and a rubber sealing ring to help stop leaks and debris entry after impacts. It’s designed to be a direct-fit replacement for a wide range of Yamaha models—YFZ 450, YFZ450R, Banshee, Raptor, Warrior, Kodiak, Grizzly, Bruin and several others—so you can swap it in without drilling or modification. The cap balances function and style, giving a visible upgrade to the tank area while maintaining the practical requirements of off-road riding.\u003c\/p\u003e\n\n\u003ch3\u003eWill this gas cap fit my ATV (YFZ 450, Banshee, Raptor)?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is broad across many Yamaha models; the cap is intended as a direct replacement for specific YFZ, Banshee, Raptor, Warrior, Kodiak, Grizzly and Bruin tanks. Always check your original cap diameter and mounting pattern to confirm fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: YFZ 450, YFZ450R, Banshee 350\/200, Raptor 660\/350\/250\/125\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Warrior 350\/450, Kodiak 400, Grizzly 660\/450\/400\/350\/300, Bruin 350\/250\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design: install without drilling or trimming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the JFG RACING cap resist damage and fuel leaks?\u003c\/h3\u003e\n\u003cp\u003eThe cap uses CNC-machined 6061 aluminum for strength and low weight, while an anodized surface improves scratch and corrosion resistance. A molded sealing ring sits between the cap and tank opening to limit fuel escape if the ATV tips or takes a hit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 aluminum body for durability and lightness\u003c\/li\u003e\n  \u003cli\u003eAnodic oxidation finish for color and corrosion protection\u003c\/li\u003e\n  \u003cli\u003eIntegrated rubber seal to reduce leakage after impacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation steps are required and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be simple: remove the stock cap and replace it with the JFG RACING unit using the same mounting points. No special alterations are required; most installs only need common hand tools or sometimes no tools at all depending on your model.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove original cap following manufacturer instructions\u003c\/li\u003e\n  \u003cli\u003ePosition new cap and hand-tighten or use basic wrench if needed\u003c\/li\u003e\n  \u003cli\u003eVerify seal alignment and check for snug fit before riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this cap change the look and maintenance of my ATV?\u003c\/h3\u003e\n\u003cp\u003eThe anodized blue finish provides a clear visual upgrade at the tank opening, making the machine look more customized and race-ready. The protective oxide layer reduces routine surface wear, and because it’s aluminum, it won’t add significant weight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBright anodized color enhances the cockpit area\u003c\/li\u003e\n  \u003cli\u003eOxide layer reduces paint fading and corrosion over time\u003c\/li\u003e\n  \u003cli\u003eLightweight construction keeps overall weight minimal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who want a reliable, stylish replacement fuel cap for compatible Yamaha ATVs—those restoring a machine, upgrading for aesthetics, or swapping a damaged OEM cap. It suits off-road enthusiasts seeking a sturdy, lightweight component with an improved seal, and any owner who prefers quick, bolt-on upgrades without extensive modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this cap compatible with my YFZ450R?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The JFG RACING cap is designed to fit YFZ450 and YFZ450R models as a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the cap include a fuel seal to prevent leaking?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It has an integrated rubber sealing ring to reduce fuel outflow after impacts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67592975417529,"sku":"B06ZZP5BDW","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-cap-blue.jpg?v=1790570442"},{"product_id":"jfg-racing-carbon-fiber-pattern-electric-bike-battery-cover-for-surron-light-bee-x-s-lightweight-heat-resistant-pp-shell","title":"JFG RACING Carbon-Fiber Pattern Electric Bike Battery Cover for SurRon Light Bee X\/S — Lightweight Heat-Resistant PP Shell","description":"\u003cp\u003e\u003cstrong\u003eThe JFG RACING carbon fiber pattern battery cover is a lightweight, heat-resistant PP replacement shell designed to protect and style the battery compartment of SurRon Light Bee X and S models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis molded battery cover combines durable polypropylene construction with a carbon-fiber textured finish to shield your SurRon Light Bee X\/S battery pack from knocks, dust and heat while giving the bike a sharper, customized look. At 230 g and sized to 26 × 15 × 6 cm, it’s built to be both unobtrusive and tough, offering straightforward installation for riders who want practical protection and an upgraded aesthetic without adding bulk.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cover protect my SurRon battery under real-world conditions?\u003c\/h3\u003e\n\u003cp\u003eThe rigid PP shell resists high temperatures and resists fading, creating a barrier against debris, impact and sunlight exposure that can accelerate wear. It reduces direct contact with rocks and branches and helps keep grime away from connector areas.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature resistant polypropylene material for thermal durability\u003c\/li\u003e\n  \u003cli\u003eRigid construction to absorb minor impacts and abrasions\u003c\/li\u003e\n  \u003cli\u003eProtects connectors and outer battery casing from dust and moisture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cover fit my SurRon Light Bee X or S, and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe cover is dimensioned to fit SurRon Light Bee X and S models and is supplied ready to mount. Installation needs only basic alignment and fastening to the existing battery compartment points; no wiring or battery modification is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for SurRon Light Bee X\/S fitment\u003c\/li\u003e\n  \u003cli\u003eCompact 26 × 15 × 6 cm profile for a snug fit\u003c\/li\u003e\n  \u003cli\u003eLightweight 230 g piece that won’t alter bike handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat visual and style benefits does the carbon fiber pattern bring?\u003c\/h3\u003e\n\u003cp\u003eThe textured carbon-fiber look adds a modern, sport-inspired accent to the Light Bee’s frame without the cost or fragility of real carbon. Its pattern resists visible fading over time and complements aftermarket trims and accessories for a cohesive appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon fiber pattern finish for a premium, sporty appearance\u003c\/li\u003e\n  \u003cli\u003eConsistent color and texture that resists fading\u003c\/li\u003e\n  \u003cli\u003eEnhances the bike’s overall styling while remaining understated\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the material specs and package contents?\u003c\/h3\u003e\n\u003cp\u003eThe cover is molded from high-quality polypropylene (PP), balancing impact tolerance with heat resistance. The package includes a single battery cover as pictured; installation instructions are not included, so basic mechanical familiarity or a quick shop visit may be helpful.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: durable PP (polypropylene)\u003c\/li\u003e\n  \u003cli\u003eWeight: approximately 230 g; Size: 26 cm × 15 cm × 6 cm\u003c\/li\u003e\n  \u003cli\u003ePackage: 1 × battery cover (no installation instructions)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders of SurRon Light Bee X or S who want to protect their battery pack from everyday trail wear while improving the bike’s appearance will benefit most. It’s a practical upgrade for commuters, trail riders and anyone seeking a lightweight, weather-resistant replacement cover that’s simple to mount and visually striking.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this cover fit both SurRon Light Bee X and S?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The cover is designed specifically to fit SurRon Light Bee X and S battery compartments without modification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are installation instructions included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The package contains one battery cover only; basic mechanical knowledge or a shop can assist with installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67593204007097,"sku":"B0CCR5HSYS","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-battery-cover.jpg?v=1790572956"},{"product_id":"jfg-racing-billet-fuel-tank-cap-for-honda-crf150r-crf230f-red-anodized-cnc-aluminum-with-breather","title":"JFG RACING Billet Fuel Tank Cap for Honda CRF150R\/CRF230F – Red Anodized CNC Aluminum with Breather","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING's red billet gas tank cap replacement is a CNC-machined aluminum cap and breather that upgrades durability and style for compatible off-road motorcycles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis lightweight, anodized red gas cap cover replaces the factory plastic unit to give your dirt bike a stronger, cleaner-looking fuel access point. Made from CNC-machined aluminum with a sealed, color-anodized finish, the cap includes a breather designed to help reduce fuel leakage if the bike tips over. It ships with the cap and a vent fitting; installation is straightforward for most riders familiar with tank hardware swaps.\u003c\/p\u003e\n\n\u003ch3\u003eWill this cap fit my bike model and year?\u003c\/h3\u003e\n\u003cp\u003eThis JFG RACING cap is designed to fit a range of Honda and Yamaha off-road models and certain ATVs across the years listed. Check the specific models and years below against your bike's make and fuel cap configuration before ordering. If your stock cap mounts and sealing surface match the OEM patterns for the listed models, the replacement should fit without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with CRF150R (2007–2020) and CRF230F (2004–2019)\u003c\/li\u003e\n  \u003cli\u003eFits CR85R (2003–2007), CR125R (2000–2007), CR250R (2000–2007)\u003c\/li\u003e\n  \u003cli\u003eFits XR100R\/50R\/80R\/70R (2001–2003), TTR125 (2000–2005, 2020–2022), Raptor 700 (2006–2021)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the billet cap improve durability and performance?\u003c\/h3\u003e\n\u003cp\u003eThe cap is CNC machined from aluminum, which makes it stiffer and more impact resistant than the stock plastic cap while remaining light. The anodized finish helps protect against corrosion and abrasion from trail use. An included breather can reduce fuel seepage if the bike falls, improving safety and cleanliness around the tank area.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined aluminum body for increased strength\u003c\/li\u003e\n  \u003cli\u003eAnodized red surface for corrosion resistance and aesthetics\u003c\/li\u003e\n  \u003cli\u003eIntegrated breather to help minimize fuel leakage when tipped\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what’s included in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is usually quick and requires basic hand tools; no special training is needed for users comfortable working on fuel-cap hardware. The product ships with the billet gas cap and a breather fitting as shown in product photos. Installation instructions are not included, so keep a service manual or online resource handy if you need torque specs or sequence guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains one billet gas cap and one air vent\u003c\/li\u003e\n  \u003cli\u003eSimple swap of the stock cap—no drilling or permanent modification in most cases\u003c\/li\u003e\n  \u003cli\u003eInstallation instruction sheet not included; basic tools recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat finish and color options does this cap offer?\u003c\/h3\u003e\n\u003cp\u003eThis listing is for the bright red anodized finish, chosen for vivid color retention and trail-ready wear resistance. The anodizing process helps protect the aluminum against fading and light surface scratches. Expect a lightweight cap with a polished, colored surface that complements red-themed plastics or adds contrast to other color schemes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRed anodized surface for long-lasting color and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eLightweight construction keeps unsprung weight low\u003c\/li\u003e\n  \u003cli\u003eClean machined details for an upgraded visual appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This JFG RACING billet fuel cap is aimed at off-road riders, weekend racers, and DIY mechanics who want a stronger, more attractive replacement for worn or cracked plastic caps. It's ideal for owners of the listed Honda CR and XR models, TTR125 and Yamaha Raptor 700 riders who want durable, lightweight hardware and a bold red finish without major modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this cap include a breather?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package includes the billet gas cap plus an air vent\/breather to help reduce fuel seepage if the bike tips.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need special tools to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; basic hand tools are usually enough for a direct swap on compatible models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67593385115833,"sku":"B071DGQ4K3","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-gas-cap-red.jpg?v=1790575085"},{"product_id":"jfg-racing-rear-axle-block-for-honda-crf-red-cnc-6061-aluminum-chain-adjuster-lightweight-durable","title":"JFG RACING Rear Axle Block for Honda CRF — Red CNC 6061 Aluminum Chain Adjuster, Lightweight Durable","description":"\u003cp\u003e\u003cstrong\u003eJFG RACING rear axle block is a CNC‑machined aluminum chain adjuster engineered to hold your Honda CRF rear axle securely and keep the drive chain aligned under racing or trail conditions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis red rear axle block is built for a broad range of Honda CRF models and years, offering a low‑weight, corrosion‑resistant alternative to stock adjusters. It replaces the factory unit with a durable 6061 aluminum part finished by anodizing for color longevity and surface hardness. The block helps maintain correct chain tension and axle positioning so the sprocket and chain track true even during aggressive riding.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Honda CRF models will this axle block fit?\u003c\/h3\u003e\n\u003cp\u003eThe JFG RACING axle block is designed to cover many CRF platforms across model years. Fitment was developed to match OEM mounting points for direct replacement on compatible machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCRF250R (2004–2024)\u003c\/li\u003e\n  \u003cli\u003eCRF450R (2002–2024)\u003c\/li\u003e\n  \u003cli\u003eCR125R \u0026amp; CR250R (2000–2007)\u003c\/li\u003e\n  \u003cli\u003eAlso fits selected CRF250X, CRF450X, CRF450RX, CRF250RX, CRF450L and CRF450RL model years listed by the manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part help chain alignment and tension?\u003c\/h3\u003e\n\u003cp\u003eBy locking the rear axle in the correct lateral position, the adjuster ensures the rear sprocket stays in-line with the chain path. That reduces uneven wear, decreases chain slippage risk, and helps maintain predictable rear-wheel tracking when accelerating or braking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFixes axle position to preserve straight chain-to-sprocket alignment\u003c\/li\u003e\n  \u003cli\u003eHelps keep chain tension within the desired range during rides\u003c\/li\u003e\n  \u003cli\u003eMinimizes lateral movement that can accelerate sprocket and chain wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish are used, and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThe block is CNC machined from 6061 aluminum, a common motorcycle-grade alloy chosen for its blend of strength and low weight. Anodic oxidation (anodizing) is applied to the outer surface to improve scratch resistance and maintain the red color under UV exposure and regular use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061 aluminum offers strong yet lightweight construction\u003c\/li\u003e\n  \u003cli\u003eCNC manufacturing ensures precise fit to factory mounting points\u003c\/li\u003e\n  \u003cli\u003eAnodized finish resists fading and adds a textured surface for durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic motorcycle maintenance. The axle block replaces the existing adjuster and secures with the original hardware; no frame modification is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect swap into OEM location—no cutting or drilling\u003c\/li\u003e\n  \u003cli\u003eTypical tools: socket or wrench set and torque specification review\u003c\/li\u003e\n  \u003cli\u003eRe-tighten axle and recheck chain alignment after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who want a robust, lightweight upgrade to their Honda CRF’s rear axle adjuster—whether you race, ride technical trails, or prefer to customize your bike’s look. It’s aimed at mechanics and DIY enthusiasts who need precise fitment and a long‑lasting finish, as well as riders replacing worn stock parts with a durable anodized alternative.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this axle block fit my CRF450R 2018?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this JFG RACING block fits CRF450R models from 2002 through 2024, including 2018.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the adjuster?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools—standard socket or wrench set and torque checking are all that's required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67593924903097,"sku":"B0719H5252","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-rear-axle-block-front-view.jpg?v=1790580757"},{"product_id":"jfg-racing-universal-frame-battery-bag-for-electric-dirt-bike-black-pouch-water-resistant-nylon-reflective","title":"JFG RACING Universal Frame Battery Bag for Electric Dirt Bike — Black Pouch, Water‑Resistant Nylon \u0026 Reflective","description":"\u003cp\u003e\u003cstrong\u003eA compact, water‑resistant frame bag from JFG RACING that mounts to the battery cover to hold phones, tools, and small essentials while riding off‑road.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis durable black pouch is designed specifically for electric dirt bikes and ebikes, offering a secure place to store items you need on the trail without interfering with bike controls. Built from abrasion‑resistant nylon with reflective detailing and adjustable straps, the bag balances protection, visibility, and easy access. It fits a wide variety of models—refer to the included size chart to confirm fit before installing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this bag attach to my electric dirt bike?\u003c\/h3\u003e\n\u003cp\u003eThe pouch installs on the battery cover using an elastic arm strap that adjusts between 14 cm and 38 cm, letting you position it on the frame or wear it as a wrist\/arm bag off the bike. The attachment is designed to keep the bag stable during rough terrain while allowing quick removal for carrying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElastic arm strap with 14–38 cm adjustable range for frame or wearable use\u003c\/li\u003e\n  \u003cli\u003eLow‑profile mounting to avoid contact with controls or pedals\u003c\/li\u003e\n  \u003cli\u003eQuick‑release fit for easy removal and reattachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it protect my phone and tools from dirt and weather?\u003c\/h3\u003e\n\u003cp\u003eThe JFG RACING bag uses high‑strength nylon that resists abrasion and repels water, helping protect contents from mud, dust, and light rain. Internal compartments and two separate zippered pockets keep items organized and reduce movement inside the pouch.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWater‑repellent nylon exterior for light moisture protection\u003c\/li\u003e\n  \u003cli\u003eTwo zippered pockets: main 20×9 cm and secondary 15×8.5 cm\u003c\/li\u003e\n  \u003cli\u003eInternal compartment pocket for small tools or cards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the bag visible and safe for night rides?\u003c\/h3\u003e\n\u003cp\u003eYes — the bag includes a bright reflective rope that increases visibility when worn on the arm or mounted on the bike at night. This reflective detail helps other riders and vehicles spot you in low‑light conditions without adding bulk.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh‑visibility reflective rope for improved nighttime warning\u003c\/li\u003e\n  \u003cli\u003eCompact design avoids obstructing lights or reflectors on the bike\u003c\/li\u003e\n  \u003cli\u003eWorks as both a mounted pouch and wearable safety accessory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich bikes will this pouch fit?\u003c\/h3\u003e\n\u003cp\u003eThis Universal Frame Battery Bag is compatible with many popular electric dirt bikes and ebikes, including Surron Light Bee variants, Tutti Soleil 01, Talaria MX models, and multiple E Ride Pro versions. Always check the product images and size chart to ensure the dimensions match your bike’s battery cover or mounting area.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include Surron Light Bee S\/X\/Ultra Bee\/variants, Tutti Soleil 01\u003c\/li\u003e\n  \u003cli\u003eFits Talaria MX3\/ MX4\/ MX5 and X160\/ X260 series\u003c\/li\u003e\n  \u003cli\u003eSupports a wide range of ebikes—confirm with the included sizing guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who want a small, reliable storage solution on electric dirt bikes and ebikes—especially commuters and trail riders who need a safe place for phones, multi‑tools, spare parts, or personal items. It suits owners of the listed compatible models, anyone who values visibility after dark, and those who prefer a removable bag that doubles as a wrist or arm pouch for short off‑bike tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this bag fit my Surron Light Bee?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's designed for Surron Light Bee models, but check the included size chart to confirm your battery cover dimensions before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the pouch waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The nylon is water‑repellent and resists light rain and splashes, but it's not fully submersible or guaranteed waterproof in heavy downpours.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JFG RACING","offers":[{"title":"Default Title","offer_id":67594561978553,"sku":"B0B5L77ZJH","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jfg-racing-front-view-pouch.jpg?v=1790584138"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/jfg-racing-front-view-pouch.jpg?v=1790612603","url":"https:\/\/redleafauto.ca\/collections\/jfg-racing.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}