{"title":"Orion Motor Tech","description":"\u003cp\u003eBrowse 266 Orion Motor Tech products at RedLeaf Auto, including brake tools, steering \u0026amp; suspension tools and a\/c tools \u0026amp; equipment. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"orion-motor-tech-12v-20-gpm-fuel-transfer-pump-telescopic-suction-tube-manual-nozzle","title":"Orion Motor Tech 12V 20 GPM Fuel Transfer Pump — Telescopic Suction Tube, Manual Nozzle","description":"\u003cp\u003e\u003cstrong\u003eThe OMT 12V 20 GPM Fuel Transfer Pump with Manual Nozzle is a high-flow, jobsite-ready 12V pump that moves diesel and gasoline quickly while minimizing clogs and waste.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're topping off tractors, filling truck tanks, or transferring fuel from barrels on site, this Orion Motor Tech pump combines a powerful 20 GPM flow rate with rugged materials and a telescopic suction tube to reach deeper into drums. It's built for mobile refueling: 12V DC power, reinforced fittings, and thermal protection let you work where vehicles and equipment are kept, not just at a stationary fueling station.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast will this pump refuel my equipment?\u003c\/h3\u003e\n\n\u003cp\u003eThe pump delivers up to 20 gallons per minute, which significantly reduces refill time for large tanks compared with low-flow transfer options. That means less downtime and faster turnaround for work crews and fleet vehicles.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaximum flow: 20 GPM for quick transfers\u003c\/li\u003e\n  \u003cli\u003eSuitable for diesel and gasoline\u003c\/li\u003e\n  \u003cli\u003eManual nozzle for controlled dispensing\u003c\/li\u003e\n  \u003cli\u003eIdeal for tanks, drums, and vehicle reservoirs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it handle dirty fuel and avoid clogs?\u003c\/h3\u003e\n\n\u003cp\u003eOrion Motor Tech equipped the unit with built-in filtration to reduce debris entering the pump, lowering the chance of interruptions. The filtration combined with robust construction helps the pump maintain steady performance during repeated site use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIntegrated filter traps particulates before the impeller\u003c\/li\u003e\n  \u003cli\u003eReinforced fittings reduce leak and contamination points\u003c\/li\u003e\n  \u003cli\u003eDesigned for routine fueling environments with some debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this on a farm, truck, or boat, and how is it powered?\u003c\/h3\u003e\n\n\u003cp\u003eThis pump runs on 12V DC, so it connects easily to vehicle batteries, tractors, or portable power sources for true mobile fueling. Built-in thermal protection and a 45-minute duty cycle help protect the motor during extended transfers often required in field or marine settings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e12V DC power for battery hookup on trucks and tractors\u003c\/li\u003e\n  \u003cli\u003eOverheat protection prevents motor damage\u003c\/li\u003e\n  \u003cli\u003e45-minute duty cycle for sustained fueling runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the telescopic suction tube improve fuel extraction?\u003c\/h3\u003e\n\n\u003cp\u003eThe adjustable 20.5–36.6 inch telescopic suction tube reaches deeper into drums and tanks to help recover more fuel and minimize leftover waste. That flexibility makes the pump useful across different container sizes without additional adapters.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTelescopic range: 20.5 to 36.6 inches\u003c\/li\u003e\n  \u003cli\u003eFits drums, jerry cans, and many tank openings\u003c\/li\u003e\n  \u003cli\u003eHelps extract more fuel to reduce leftover waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Orion Motor Tech OMT 12V 20 GPM Fuel Transfer Pump is aimed at contractors, farmers, fleet managers, boat owners, and anyone who needs fast, repeatable on-site refueling. If you move large volumes of diesel or gasoline across multiple vehicles or equipment and need a durable, portable solution with a manual nozzle and anti-clog features, this pump is designed to cut refuel time and withstand outdoor jobsite demands without specialist installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fuels can this pump handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is compatible with diesel and gasoline; avoid using it with highly volatile specialty fuels or solvents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I power the pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Connect to a 12V DC battery or vehicle port; the unit includes thermal protection and a 45-minute duty cycle.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584854261945,"sku":"B0G4R2313C","price":507.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-pump-front-view.jpg?v=1790456542"},{"product_id":"orion-motor-tech-12v-diesel-transfer-pump-kit-portable-12-gpm-fuel-pump-with-nozzle-carry-case","title":"Orion Motor Tech 12V Diesel Transfer Pump Kit — Portable 12 GPM Fuel Pump with Nozzle \u0026 Carry Case","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's OMT Diesel Transfer Pump Kit is a ready-to-use, portable 12V fuel transfer system that moves diesel and similar low-viscosity oils up to 12 gallons per minute.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit bundles a 1\/5 hp 12V electric pump, manual nozzle, hoses, fittings, and a rugged carry case so you can transfer diesel quickly and reliably without searching for extra parts. Built with a powder-coated cast iron pump body and an aluminum-alloy nozzle, the assembly balances durability with portability for jobs ranging from topping off boats to refilling equipment in the field.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit simplify refueling boats, generators, and equipment?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives pre-assembled with the main components and common fittings included, so you can start fuel transfer right away. The compact carry case keeps everything organized and protects components from damage during transport.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes pump, nozzle, inlet\/outlet hoses, clamps, and electrical leads\u003c\/li\u003e\n  \u003cli\u003e12 gpm maximum flow handles quick fill-ups\u003c\/li\u003e\n  \u003cli\u003eErgonomic case makes storage and transport straightforward\u003c\/li\u003e\n  \u003cli\u003eClear instructions reduce setup time and user error\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat control does the manual nozzle provide during transfer?\u003c\/h3\u003e\n\u003cp\u003eThe aluminum-alloy manual nozzle has an adjustable lever that lets you set or vary flow smoothly, or lock it open for continuous pumping. That control helps prevent overflows and enables precise fills into smaller tanks or awkwardly placed inlets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVariable flow with lever for fine adjustment\u003c\/li\u003e\n  \u003cli\u003eLock feature for uninterrupted transfer operations\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists wear from frequent use\u003c\/li\u003e\n  \u003cli\u003eSmoother handling reduces spillage risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fluids and lift capabilities can I expect from the pump?\u003c\/h3\u003e\n\u003cp\u003eThe 1\/5 hp 12V pump is designed for low-viscosity liquids such as diesel, kerosene, and similar oils. It can achieve a maximum flow of about 12 gallons per minute and supports lifts up to the kit's specified maximum, making it suitable for siphoning from barrels or tanks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBest suited for diesel, kerosene, and light oils\u003c\/li\u003e\n  \u003cli\u003eUp to approximately 12 gallons per minute flow rate\u003c\/li\u003e\n  \u003cli\u003eCapable of handling typical suction lifts for portable refueling\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard hose fittings for easy hookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable is the OMT Diesel Transfer Pump Kit?\u003c\/h3\u003e\n\u003cp\u003eKey pump components use corrosion-resistant finishes and sturdy alloys to endure outdoor use and repeated handling. Replacement parts and common fittings are standard sizes, making maintenance and repairs straightforward when needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePowder-coated cast iron pump housing for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eAluminum-alloy nozzle for impact and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStandard hose diameters and clamps for easy replacement\u003c\/li\u003e\n  \u003cli\u003eCarrying case protects components between uses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Orion Motor Tech OMT Diesel Transfer Pump Kit is aimed at boat owners, small fleet operators, landscapers, farmers, and DIYers who need a portable, all-in-one solution for moving diesel and other light oils. It’s practical for anyone who values fast fill times, simple control over flow, and durable hardware that travels to the job site.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this pump transfer diesel from a drum or barrel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes hoses and fittings suitable for drum or barrel refilling and supports typical suction lifts for portable transfer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the nozzle lockable for continuous flow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The aluminum manual nozzle features a lockable lever to maintain continuous transfer without holding the trigger.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584854294713,"sku":"B0D5B5SDWP","price":282.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-omt-pump-front-view.jpg?v=1790456542"},{"product_id":"orion-motor-tech-12v-diesel-transfer-pump-portable-kit-with-nozzle-hoses-11-9-gpm","title":"Orion Motor Tech 12V Diesel Transfer Pump, Portable Kit with Nozzle \u0026 Hoses — 11.9 GPM","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech 12V Diesel Transfer Pump is a portable, self-priming electric pump kit that moves diesel and other light oils up to 11.9 gallons per minute and comes complete with inlet\/outlet hoses, a nozzle, and mounting accessories.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact diesel transfer pump is engineered for fast, tidy fluid handling wherever you need it — garages, boats, farms, and job sites. The kit pairs a 0.2 hp (175W) copper motor inside a steel housing with ready-to-use hoses and a spray-style nozzle that supports both trigger control and continuous flow. Safety and reliability are built in via a mesh strainer, bypass valve, mounting base, and thermal-rest guidance for extended use.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this pump move diesel on site?\u003c\/h3\u003e\n\u003cp\u003eThe pump delivers up to 11.9 gallons per minute under normal conditions, making short work of common transfer tasks. It’s self-priming and rated with a 16'5\" maximum suction distance and a 32'10\" maximum lift, so it can pull from lower tanks or move fuel vertically when needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTop flow rate: 11.9 GPM for rapid transfers\u003c\/li\u003e\n  \u003cli\u003eMax suction: 16'5\" (5 meters approx.) for deep draws\u003c\/li\u003e\n  \u003cli\u003eMax lift: 32'10\" (10 meters approx.) for elevated discharge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat controls and safety features are included?\u003c\/h3\u003e\n\u003cp\u003eThe included nozzle has an adjustable trigger for precise manual flow and a latch for continuous pumping. Built-in safeguards like a mesh inlet strainer and a bypass valve help prevent clogs and overpressure, while the mounting base reduces vibration and secures the unit during operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable trigger with continuous-flow lock\u003c\/li\u003e\n  \u003cli\u003eMesh strainer to block debris and protect the pump\u003c\/li\u003e\n  \u003cli\u003eBypass valve to avoid pressure build-up\u003c\/li\u003e\n  \u003cli\u003eMounting base for stable, wobble-free use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat types of fluids and equipment is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis electric pump is designed for low-viscosity fluids such as diesel, kerosene, and similar light oils. It is not intended for high-viscosity liquids (for example heavy motor oils) and should be used only with compatible fuels and lubricants to maintain motor health.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with diesel, kerosene, and light heating oils\u003c\/li\u003e\n  \u003cli\u003eNot recommended for thick motor oils or high-viscosity fluids\u003c\/li\u003e\n  \u003cli\u003eIdeal for cars, boats, mowers, and portable tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I operate the pump for long-lasting performance?\u003c\/h3\u003e\n\u003cp\u003eTo protect the motor, follow the recommended duty cycle and cooling guidance: allow a 5-minute rest after each 10 minutes of continuous use when ambient temperatures exceed 45°C (113°F). Avoid running the pump dry and keep the inlet strainer clean to prevent overheating and extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended duty cycle: rest 5 minutes after 10 continuous minutes above 45°C\u003c\/li\u003e\n  \u003cli\u003eAvoid pumping high-viscosity fluids or running dry\u003c\/li\u003e\n  \u003cli\u003eRegularly inspect and clean the inlet strainer and hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Orion Motor Tech 12V Diesel Transfer Pump kit is tailored for mechanics, boat owners, landscapers, fleet operators, and DIYers who need a reliable, portable solution for moving diesel and other light oils quickly and cleanly. If you require a compact, electrically powered pump with straightforward controls, solid construction, and a ready-to-use accessory set, this unit delivers practical, job-ready performance without complicated setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this pump be used with gasoline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit is designed for diesel and light oils; avoid using it with gasoline due to safety and compatibility concerns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long can I run the pump continuously?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow duty guidance: allow a 5-minute rest after every 10 minutes of continuous use when ambient temperature exceeds 45°C.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584856522937,"sku":"B019ZD3U90","price":211.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-pump-front-view_a9a9c92a-21ed-49e7-ab15-1628c8157697.jpg?v=1790456593"},{"product_id":"orion-motor-tech-hydraulic-flaring-tool-kit-brake-line-flaring-set-45-inverted-iso-dies-hydraulic-yoke","title":"Orion Motor Tech Hydraulic Flaring Tool Kit — Brake Line Flaring Set, 45° Inverted \u0026 ISO Dies, Hydraulic Yoke","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech OMT Hydraulic Flaring Tool Kit is a complete brake-line and tubing flaring system that cuts, deburrs, and forms multiple flare types quickly and with workshop-grade durability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you work on automotive brake lines, fuel lines, transmission cooling lines, or general copper tubing, this kit supplies the dies, cutter, and hydraulic yoke to produce accurate, repeatable flares. The set is packaged in a sturdy blow-molded case for easy storage and transport, and the components are made to endure demanding use without frequent replacement.\u003c\/p\u003e\n\n\u003ch3\u003eWhat sizes and flare types can this kit produce?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a broad selection of dies to accommodate common tubing standards and flare profiles used in vehicles and plumbing. It supports 45° inverted flares, ISO-style flares, push-connect fittings, fuel line flares, and transmission cooling flares across a wide size range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e45° inverted dies for 3\/16\"–1\/2\" tubing\u003c\/li\u003e\n  \u003cli\u003eISO dies fitting 4.75–10 mm tubes\u003c\/li\u003e\n  \u003cli\u003ePush-connect dies for 1\/4\"–3\/8\" lines\u003c\/li\u003e\n  \u003cli\u003eDedicated fuel and transmission line dies for 5\/16\", 3\/8\", and 1\/2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the cutter and deburring tool improve flare quality?\u003c\/h3\u003e\n\u003cp\u003eCleanly cut and deburred tubing is essential for reliable, leak-free flares. The included cutter makes accurate cuts on small-diameter metal tubing while the deburring tool removes sharp edges, producing a consistent seating surface for the flare.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTube cutter works on 1\/8\"–5\/8\" outer diameters for precise cuts\u003c\/li\u003e\n  \u003cli\u003eDeburring tool smooths inner and outer edges to prevent sealing gaps\u003c\/li\u003e\n  \u003cli\u003eReduced rework and improved fitting alignment from cleaner ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the hydraulic yoke and construction dependable?\u003c\/h3\u003e\n\u003cp\u003eThe flaring yoke is forged from 42CrMo alloy steel for higher tensile strength and wear resistance under repeated hydraulic pressure. That rugged construction minimizes deformation and keeps die alignment stable when forming flares on tougher jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e42CrMo steel yoke for long-lasting strength\u003c\/li\u003e\n  \u003cli\u003eHydraulic operation gives consistent force and control\u003c\/li\u003e\n  \u003cli\u003eWear-resistant surfaces extend service life in professional settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the kit portable and organized for fieldwork?\u003c\/h3\u003e\n\u003cp\u003eYes—the entire set ships in a molded hard case with labeled slots so every part stays in place. The compact layout helps technicians quickly find the right die and carry the kit to roadside or shop repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRugged blow-molded case with clear size markings\u003c\/li\u003e\n  \u003cli\u003eNeat storage prevents lost pieces and speeds setup\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits workshop shelves and vehicle trunks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT Hydraulic Flaring Tool Kit is aimed at DIY mechanics, mobile technicians, and professional garage teams who need a single kit to handle brake, fuel, and transmission tubing flares. If you frequently form flares on copper or similar soft metals (not stainless steel), need portable organization, and want a durable hydraulic yoke to reduce manual effort, this kit provides the dies and finishing tools required for consistent, serviceable connections.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit flare stainless steel tubing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit is designed for softer metals like copper and common automotive fuel\/brake lines, and is not suitable for stainless steel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tube diameters does the cutter handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The included cutter works on tubes with outer diameters from 1\/8\" up to 5\/8\".\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584869466297,"sku":"B0GFDLZM1F","price":416.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/omt-hydraulic-flaring-kit-case-open.jpg?v=1790457033"},{"product_id":"orion-motor-tech-wheel-bearing-press-kit-24-piece-front-wheel-bearing-removal-installation-stainless-steel-case","title":"Orion Motor Tech Wheel Bearing Press Kit — 24‑Piece Front Wheel Bearing Removal \u0026 Installation, Stainless Steel Case","description":"\u003cstrong\u003eThe Orion Motor Tech OMT Wheel Bearing Press Kit is a 24-piece front-wheel bearing removal and installation set designed to remove and install wheel bearings quickly without hammering or disassembling the steering knuckle.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact, portable kit provides the sleeves, bushings, and two heavy-duty sliding screws you need to press out and seat front wheel bearings on most front-wheel-drive cars and light trucks. Built from heat-treated stainless steel with precision threads and a molded carrying case, the set simplifies jobs that otherwise require expensive shop tools or risky hammer techniques. Follow lubrication and alignment guidance on the rod threads to protect the hardware and get smooth operation.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit speed up front wheel bearing jobs?\u003c\/h3\u003e\n\u003cp\u003eDesigned to avoid hammering and unnecessary disassembly, the kit uses matched sleeves and bushings with two high-strength 8.8-grade sliding screws to apply steady, controlled pressure. That means faster, cleaner bearing removal and installation without damaging the steering knuckle or strut.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo precision-threaded sliding screws for smooth, even force\u003c\/li\u003e\n  \u003cli\u003eMultiple sleeve and bushing sizes to fit common bearing diameters\u003c\/li\u003e\n  \u003cli\u003ePress action replaces repeated hammer strikes and reduces rework\u003c\/li\u003e\n  \u003cli\u003eMolded case keeps all pieces organized for quick on-bench access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and bearing sizes does the kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is built for wide compatibility with most front‑wheel‑drive passenger cars and light trucks, both foreign and domestic. The included sleeves and bushings cover the typical range of wheel bearing inner and outer diameters encountered in routine repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultiple sleeve diameters to match common wheel bearing sizes\u003c\/li\u003e\n  \u003cli\u003eWorks with most FWD and light-duty truck front bearings\u003c\/li\u003e\n  \u003cli\u003eUniversal-style components reduce the need for vehicle-specific tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is the OMT Wheel Bearing Press Kit?\u003c\/h3\u003e\n\u003cp\u003eComponents are manufactured from stainless steel with heat-treated, blackened sliding screws to resist wear and corrosion. Precision threading and robust construction let the kit withstand repeated shop use while maintaining smooth operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel parts for corrosion resistance and longevity\u003c\/li\u003e\n  \u003cli\u003eHeat-treated screws for higher tensile strength and durability\u003c\/li\u003e\n  \u003cli\u003eBlackened finish on screws improves wear resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about setup, safety, and maintenance?\u003c\/h3\u003e\n\u003cp\u003eAssembly is straightforward: select the matching sleeve and bushing, lubricate the rod threads, and use the sliding screws to press bearings in or out. Keep the threads lubricated, use appropriate jack and supports, and never apply excessive side load to the knuckle or strut.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLubricate the rod threads before use to protect threads and ensure smooth travel\u003c\/li\u003e\n  \u003cli\u003eUse proper vehicle support and observe torque guidelines when reassembling\u003c\/li\u003e\n  \u003cli\u003eStore all components in the blow-molded case to prevent damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT Wheel Bearing Press Kit is ideal for DIY mechanics, backyard enthusiasts, and professional technicians who need a portable, versatile solution for front wheel bearing service. If you frequently work on front‑wheel‑drive cars or light trucks and prefer a controlled press method over hammering or expensive shop presses, this kit offers a durable, organized option to complete bearing jobs more cleanly and efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my car's front wheel bearing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes multiple sleeves and bushings to cover common front-wheel-drive and light-truck bearing sizes. Confirm your bearing diameter against the kit components before starting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special equipment to use the press kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special press is required. Use the included sliding screws and sleeves with standard jack stands and hand tools; lubricate the threads for smooth operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584880148665,"sku":"B01FLVOAZI","price":219.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-omt-front-packaging.jpg?v=1790457418"},{"product_id":"orion-motor-tech-wheel-bearing-press-kit-24-piece-front-wheel-set-with-heat-treated-screws","title":"Orion Motor Tech Wheel Bearing Press Kit, 24-Piece Front Wheel Set with Heat-Treated Screws","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's OMT Wheel Bearing Press Kit is a 24-piece tool set designed to remove and install front wheel bearings quickly and safely without hammering or disassembling the steering knuckle.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete front wheel bearing press kit bundles sleeves, bushings, two hardened sliding screws, and a molded carrying case so you can service wheel bearings on most front-wheel-drive cars and light trucks. Built from heat-treated, corrosion-resistant materials and supplied with multiple adapter sizes, the set helps prevent hub and knuckle damage while keeping repair time and effort to a minimum. The components are compact enough to use in tight wheel wells while robust enough for repeated shop use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the kit remove and install wheel bearings without damaging the knuckle?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses threaded sliding screws and interchangeable sleeves that press bearings in or out along the bearing race, producing even force and eliminating hammer strikes. This controlled pressing keeps the steering knuckle and strut assembly intact and reduces the risk of scoring or misalignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 8.8-grade sliding screws with precision threads for smooth, controllable force\u003c\/li\u003e\n  \u003cli\u003eMultiple-sized sleeves and bushings to match common bearing diameters\u003c\/li\u003e\n  \u003cli\u003eEven axial pressure prevents tilting or binding during removal\/installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and bearings will this press kit work with?\u003c\/h3\u003e\n\u003cp\u003eThe set is made to cover most front-wheel-drive automobiles and light trucks, both domestic and foreign, by offering a range of sleeve and bushing sizes. While it manages the majority of common hub and bearing dimensions, always check your vehicle’s bearing outer and inner race diameters before starting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdapters sized for common front-wheel-drive wheel bearings\u003c\/li\u003e\n  \u003cli\u003eSuitable for many compact, mid-size, and light truck front hubs\u003c\/li\u003e\n  \u003cli\u003eNot intended for heavy commercial axles or specialty bearings requiring hydraulic presses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction ensure durability and longevity?\u003c\/h3\u003e\n\u003cp\u003eOrion Motor Tech built this press kit from premium stainless steel with heat-treated, blackened sliding screws to resist wear and corrosion. The quality threading and robust sleeves mean the components retain their fit and function even after repeated use in a garage or small shop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated, blackened sliding screws for strength and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eStainless-steel sleeves and bushings for long-term durability\u003c\/li\u003e\n  \u003cli\u003eBlow-molded carrying case to protect and organize parts between jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to set up and operate for a DIY mechanic?\u003c\/h3\u003e\n\u003cp\u003eSetup is straightforward: select matching sleeve sizes, assemble the slide screw and adapters, lubricate threads, and crank the screw to press the bearing. The kit is compact and portable, making it practical for home mechanics who need a reliable way to service front wheel bearings without specialized shop equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClear organization in a molded case speeds part selection\u003c\/li\u003e\n  \u003cli\u003eThread lubrication recommended to protect screw threads and ease operation\u003c\/li\u003e\n  \u003cli\u003eSimple hand tools and a wrench are all that’s required for operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The OMT Wheel Bearing Press Kit is aimed at DIY enthusiasts, home mechanics, and small-shop technicians who service front-wheel-drive passenger vehicles and light trucks. If you want a portable, reusable alternative to hammering bearings out or renting a hydraulic press—and you work on common passenger car hubs—this set supplies the adapters and hardware to do the job cleanly and safely.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my car's front wheel bearing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit covers most common front-wheel-drive bearings, but check your bearing outer\/inner race diameters against the supplied sleeve sizes before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra tools to use the press kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only basic hand tools and a wrench; lubricate the screw threads and use the correct sleeves for safe operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584880181433,"sku":"B07GSQLCS4","price":219.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-omt-front-wheel-bearing-press-kit-case-open.jpg?v=1790457419"},{"product_id":"orion-motor-tech-38pc-wheel-bearing-press-kit-2-in-1-puller-installer-heat-treated-steel","title":"Orion Motor Tech 38pc Wheel Bearing Press Kit - 2-in-1 Puller \u0026 Installer, Heat-Treated Steel","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech OMT 38pc Wheel Bearing Press Kit is a 2-in-1 bearing puller and installer set designed to remove and fit wheel bearings, gears, pulleys, and steering components for cars, ATVs, and light trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact professional kit combines a hydraulic-style bearing press and a heavy-duty separator puller so you can handle both installation and extraction jobs without switching tools. The 38 pieces include a variety of sleeves, bushings, forcing screws and puller legs to match most common hub and axle sizes. Built from heat-treated 1045 structural steel with a black oxide finish and packed in a blow-molded case, the set is made to resist corrosion and stay organized in busy garages and mobile shops.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit speed up bearing removal and installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe OMT 38pc kit gives you the right contact surfaces and threaded hardware to press bearings in straight and extract them without damaging hubs. Using the included separators and forcing screws provides controlled, even force so jobs finish faster and with fewer retries.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24 installation tools (sleeves, bushings, plates, nut, screws) for accurate positioning\u003c\/li\u003e\n  \u003cli\u003e14 puller components (yoke, forcing screw, jaws, puller legs) for tough extractions\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish reduces galling during repeated presses\u003c\/li\u003e\n  \u003cli\u003eBlow-molded case keeps matched parts together for quicker setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and parts are compatible with this bearing press set?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit covers a broad range of front and rear wheel bearings on many front-wheel-drive cars, light trucks and ATVs, plus common shop jobs like removing pulleys, gears and steering wheel hubs. The range of sleeve diameters and bushings addresses most factory bearing dimensions encountered in DIY and professional repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultiple sleeves and 13 bushings for varied inner\/outer diameters\u003c\/li\u003e\n  \u003cli\u003eDesigned for front-wheel drive hubs, light truck axles and ATV assemblies\u003c\/li\u003e\n  \u003cli\u003eUse on gears, pulleys and steering hubs when access allows\u003c\/li\u003e\n  \u003cli\u003eNot for large industrial bearings beyond kit size range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the construction reliable for repeated shop use?\u003c\/h3\u003e\n\n\u003cp\u003eOrion Motor Tech built the tools from 1045 structural steel heat-treated for strength, then finished them in black oxide to resist rust and surface wear. The materials and machining tolerances minimize deformation under load so threads and press faces stay true through many cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1045 heat-treated steel for tensile strength and toughness\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish for increased corrosion resistance\u003c\/li\u003e\n  \u003cli\u003ePrecision bushings and sleeves to distribute force evenly\u003c\/li\u003e\n  \u003cli\u003eSturdy molded case to protect components between jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I organize and transport the 38 pieces effectively?\u003c\/h3\u003e\n\n\u003cp\u003eThe blow-molded carrying case is molded with dedicated cavities for each component to prevent loss and speed selection. Foam-free molded inserts keep heavier pieces from shifting, so the kit stays ready for mobile technicians or home mechanics moving between vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom-molded case compartments for each part\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits into most shop tool cabinets or trunks\u003c\/li\u003e\n  \u003cli\u003eSecure latches and integrated handle for safe transport\u003c\/li\u003e\n  \u003cli\u003eVisual layout allows quick inventory before and after work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The OMT 38pc Wheel Bearing Press Kit is aimed at home mechanics, mobile technicians and small repair shops that need a durable, versatile 2-in-1 puller and installer without investing in large hydraulic presses. If you service front-wheel-drive cars, ATVs or light trucks and want a portable, full-range kit for bearings, pulleys and steering hub jobs, this set gives the necessary sizes, solid construction, and organized storage to get the work done efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit work on both front and rear wheel bearings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The range of sleeves and bushings fits most front and rear wheel bearing applications on cars, ATVs and light trucks within the kit's size limits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material are the tools made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: All steel components are made from heat-treated 1045 structural steel with a black oxide finish for durability and corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584880214201,"sku":"B0D5BBMQZQ","price":380.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-omt-38pc-case-front.jpg?v=1790457419"},{"product_id":"orion-motor-tech-4-cfm-ac-vacuum-pump-and-gauge-set-r134a-r12-r22-r502-kit-with-copper-motor-3-way-manifold","title":"Orion Motor Tech 4 CFM AC Vacuum Pump and Gauge Set — R134a\/R12\/R22\/R502 Kit with Copper Motor, 3-Way Manifold","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech OMT 4 CFM AC Vacuum Pump and Gauge Set is a complete automotive and HVAC evacuation kit that combines a 4 CFM copper-motor vacuum pump, a three-way manifold gauge, leak detector, quick couplers, hoses, and accessories for servicing R134a, R12, R22 and R502 systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit bundles the core tools technicians and DIYers need for evacuating, testing and recharging vehicle and small HVAC systems. Built for routine shop use or mobile service, the package centers on a 4 CFM vacuum pump with an all-copper motor and aluminum-alloy housing, plus a high-accuracy color-coded manifold, heavy-duty hoses and convenience extras like vacuum oil, sight glass and a carrying case.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the OMT 4 CFM vacuum pump perform during evacuation?\u003c\/h3\u003e\n\u003cp\u003eThe vacuum pump delivers a steady 4 cubic feet per minute (CFM) flow for efficient evacuation of refrigerant and moisture from lines and components. Its copper motor and aluminum alloy shell help dissipate heat and resist corrosion while brass-fitted safety caps reduce leakage risk.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated 4 CFM for fast evacuation of small to medium systems\u003c\/li\u003e\n  \u003cli\u003eAll-copper motor for reliable power and heat tolerance\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy casing improves cooling and durability\u003c\/li\u003e\n  \u003cli\u003eBrass-fitted tethered caps prevent oil seepage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat measurement and hose features help with accurate charging?\u003c\/h3\u003e\n\u003cp\u003eThe included three-way manifold gauge provides clear, real-time pressure readings so you can monitor system vacuum and charge levels. Hoses are color-coded and constructed in four layers to handle pressures up to 600 psi, with a high burst resistance for safety during service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-accuracy manifold for vacuum and pressure monitoring\u003c\/li\u003e\n  \u003cli\u003eColor-coded hoses (red\/blue\/yellow) for quick identification\u003c\/li\u003e\n  \u003cli\u003eFour-layer hose construction rated to 600 psi working pressure\u003c\/li\u003e\n  \u003cli\u003eR134a self-sealing and puncture-style taps plus quick couplers included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich convenience and maintenance features save time in the garage?\u003c\/h3\u003e\n\u003cp\u003eUser-friendly touches reduce downtime and make routine maintenance easier. The pump includes a cooling fan, a sight glass for checking oil level, and a bottom drain for quick oil changes; the kit ships with 0.26 quart of vacuum oil and organized storage for portability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in cooling fan to moderate operating temperature\u003c\/li\u003e\n  \u003cli\u003eSight glass shows oil level without disassembly\u003c\/li\u003e\n  \u003cli\u003eBottom drain valve enables fast oil removal and replacement\u003c\/li\u003e\n  \u003cli\u003eDurable case and bag keep components organized for transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich refrigerants and jobs is this set compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis set supports common automotive and light HVAC refrigerants including R134a, R12, R22 and R502, making it versatile for vehicle A\/C and indoor systems. It’s designed for evacuating, leak-checking, and servicing systems within the pump’s flow and pressure limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with R134a, R12, R22 and R502 refrigerants\u003c\/li\u003e\n  \u003cli\u003eIdeal for automotive A\/C work and small HVAC service tasks\u003c\/li\u003e\n  \u003cli\u003eIncludes leak detector and taps for on-vehicle service\u003c\/li\u003e\n  \u003cli\u003eAccessories provided for end-to-end evacuation and charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT 4 CFM kit is aimed at independent mechanics, HVAC technicians, and informed DIYers who need a portable, all-in-one vacuum and gauge solution for cars, light trucks and small HVAC equipment. If you routinely evacuate and recharge A\/C systems and want a compact kit with durable hoses, clear gauges and essential service accessories, this package covers most everyday repair and maintenance tasks without requiring larger, shop-only equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pump compatible with R134a and R12?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit supports R134a, R12, R22 and R502 for automotive and small HVAC systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much oil does the vacuum pump include?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The set includes 0.26 quart of vacuum oil and a bottom drain for easy refills.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584883818681,"sku":"B08P2PMY2L","price":309.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-packaging.jpg?v=1790457645"},{"product_id":"orion-motor-tech-24-piece-gear-puller-kit-3-4-6-8-sizes-reversible-jaws-heat-treated-steel","title":"Orion Motor Tech 24-Piece Gear Puller Kit — 3\" 4\" 6\" 8\" Sizes, Reversible Jaws \u0026 Heat-Treated Steel","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's 24-piece OMT gear puller kit is a multi-size, reversible jaw set designed to remove gears, bearings, pulleys, and flywheels from tight or deep housings with four puller sizes (3\", 4\", 6\", 8\") and adjustable reach options.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, blow-molded case contains everything a DIYer or professional needs for common removal jobs: two- and three-jaw brackets, reversible jaws for internal or external gripping, threaded forcing screws, and multiple fixing holes that let you configure each puller for short to extra-long reach. Built from heat-treated steel with corrosion-resistant finishes, the kit balances durability with portability so you can bring a full set to the garage, shop, or job site.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit handle different sizes of gears and bearings?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes four puller sizes that cover small to medium components and multiple reach settings for deeper-mounted parts. Reversible jaws let you switch between internal and external pulling so one kit works for a wide range of applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePuller spreads: 3\", 4\", 6\", 8\" for varied shaft diameters and housings.\u003c\/li\u003e\n  \u003cli\u003eReach options: 4.3\", 5\", 7.3\", 9.2\" to access shallow or deep parts.\u003c\/li\u003e\n  \u003cli\u003eFour-position jaw configuration on 4\", 6\", 8\" models for short to extra-long reach.\u003c\/li\u003e\n  \u003cli\u003eTwo- and three-jaw brackets for even and centered extraction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the reversible jaw design useful?\u003c\/h3\u003e\n\u003cp\u003eThe reversible jaws flip to engage either the inside or outside of a component so you don’t need separate tools for internal vs external extractions. This flexibility reduces setup time and lightens your toolbox while allowing you to adapt quickly on the job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlip jaws to grip bore edges (internal) or outer flanges (external).\u003c\/li\u003e\n  \u003cli\u003eQuick assembly with standard wrenches or ratchets.\u003c\/li\u003e\n  \u003cli\u003eWorks across the kit’s size range for consistent technique.\u003c\/li\u003e\n  \u003cli\u003eReversible build increases utility without extra parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and portable is the set for regular workshop use?\u003c\/h3\u003e\n\u003cp\u003eComponents are made from heat-treated steel with chrome-plated or blackened finishes to resist wear and corrosion under repeated torque loads. Parts organize neatly in a custom blow-molded case that protects tools during transport and keeps the set ready for the next job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated steel for strength under pulling forces.\u003c\/li\u003e\n  \u003cli\u003eChrome-plated and blackened finishes for corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eBlow-molded case with cutouts for secure storage and transport.\u003c\/li\u003e\n  \u003cli\u003eThreaded forcing screws designed for smooth, controlled extraction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to set up and use this kit safely?\u003c\/h3\u003e\n\u003cp\u003eAssembly is straightforward: choose two- or three-jaw brackets, mount reversible jaws in the desired orientation, align the central forcing screw, and tighten using a wrench or ratchet. Follow standard safety practices—support the workpiece, check jaw seating, and apply steady force rather than sudden impact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple hand-tool setup—no special adapters required.\u003c\/li\u003e\n  \u003cli\u003eMultiple jaw fixing holes allow precise positioning.\u003c\/li\u003e\n  \u003cli\u003eWorks with common shop wrenches and ratchets for forcing screw operation.\u003c\/li\u003e\n  \u003cli\u003eDesigned for controlled pulling to minimize part damage when used properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT 24-piece gear and bearing puller kit is aimed at mechanics, home garage enthusiasts, and maintenance technicians who need a single, portable solution for extracting gears, bearings, pulleys, and flywheels. If you value a durable, versatile kit that covers small to medium removal tasks and fits neatly in a toolbox or service vehicle, this set delivers the range and build quality you’ll use repeatedly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What sizes and reaches are included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit contains 3\", 4\", 6\", and 8\" pullers with reaches of 4.3\", 5\", 7.3\", and 9.2\" respectively.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these pullers do internal and external pulls?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the reversible jaw design supports both internal and external extractions without separate tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584889946297,"sku":"B0CN2G8P7G","price":265.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-case-open.jpg?v=1790457808"},{"product_id":"orion-motor-tech-bushing-press-kit-27-piece-22-sleeves-34-80mm-5-spindles-aisi-1045-steel-in-blow-molded-case","title":"Orion Motor Tech Bushing Press Kit 27-piece — 22 sleeves (34–80mm), 5 spindles, AISI 1045 steel in blow-molded case","description":"\u003cp\u003e\u003cstrong\u003eThe OMT 27-piece Bushing Press Kit is a complete pull-and-press sleeve set for removing and installing wheel bearings, bushings, and seals on most passenger and light commercial vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty kit from Orion Motor Tech supplies a broad range of sleeves and pulling spindles, packaged in a portable blow-molded case so you have the right diameter and strength for routine suspension and bearing work. Built from AISI 1045 steel with heat-treated, blackened spindles, the kit balances durability with on-the-job visibility thanks to notched sleeves that let you see and catch a bushing's lip cleanly.\u003c\/p\u003e\n\n\u003ch3\u003eWhat sizes and parts are included in this 27-piece set?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit covers the most common bushing and bearing diameters with 22 concentric sleeves and five pulling spindles. That range makes it suitable for many cars, light commercial vehicles (LCV) and heavier-duty garages that handle varied applications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e22 sleeves spanning 34 mm to 80 mm to fit multiple bushing diameters\u003c\/li\u003e\n  \u003cli\u003e5 pulling spindles in M10, M12, M14, M16, and M18 thread sizes\u003c\/li\u003e\n  \u003cli\u003eNotched sleeve edges for secure engagement and visual alignment\u003c\/li\u003e\n  \u003cli\u003eBlow-molded storage case for safe transport and organization\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the notched sleeve design help during removal or installation?\u003c\/h3\u003e\n\n\u003cp\u003eEach sleeve features a notch that catches the bushing edge while keeping the work visible, so you can control travel and prevent damage to external flanges. The notch simplifies alignment and reduces guessing when pressing out worn components.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNotch secures the bushing lip to prevent slipping during extraction\u003c\/li\u003e\n  \u003cli\u003eOpen view lets you confirm position and depth of the bushing\u003c\/li\u003e\n  \u003cli\u003eReduced risk of deforming seals or nearby components\u003c\/li\u003e\n  \u003cli\u003eSmoother, more predictable press operations for faster jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this kit durable enough for regular shop use?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the sleeves are made from AISI 1045 steel for robust wear resistance, and the pulling spindles are heat-treated and blackened to withstand repeated torque and resist corrosion. Together these elements deliver long service life under normal workshop conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAISI 1045 steel sleeves for strength and dimensional stability\u003c\/li\u003e\n  \u003cli\u003eHeat-treated, blackened spindles to resist wear and rust\u003c\/li\u003e\n  \u003cli\u003ePrecisely machined threads and surfaces for reliable fitment\u003c\/li\u003e\n  \u003cli\u003eCompact case protects components between jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and user-friendly is the kit for mobile mechanics?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit ships in a custom blow-molded carrying case that keeps each sleeve and spindle secured for transport from shop to roadside job. Organization minimizes search time, while the metric spindle sizes work with common wrenches and drivers you already own.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBlow-molded case with designated slots for each piece\u003c\/li\u003e\n  \u003cli\u003eLightweight enough to carry between garage bays or to a job site\u003c\/li\u003e\n  \u003cli\u003eSpindle thread sizes compatible with standard tools\u003c\/li\u003e\n  \u003cli\u003eFast setup and teardown speeds workflow on tight schedules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT 27pc Bushing Press Kit is intended for DIY enthusiasts, home-garage mechanics, and professional workshops that service passenger cars, LCVs, and many HGV-related components where bushings and seals must be pressed in or out. If you need a durable, well-organized set that covers a wide range of diameters and fits standard torque tools, this kit provides a practical, long-lasting solution without requiring specialized hydraulic presses.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit remove and install bushings on most passenger cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. With sleeves from 34–80 mm and M10–M18 spindles, it handles most passenger and many light-commercial vehicle bushings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the spindles resist corrosion and wear?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The spindles are heat-treated and blackened for improved strength and corrosion resistance during repeated use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584892043449,"sku":"B0F6MH229V","price":386.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-case.jpg?v=1790457916"},{"product_id":"orion-motor-tech-1-6-gal-vacuum-fluid-evacuator-filler-kit-15-atf-adapters-pneumatic-shop-ready","title":"Orion Motor Tech 1.6 Gal Vacuum Fluid Evacuator \u0026 Filler Kit — 15 ATF Adapters, Pneumatic Shop-Ready","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's 1.6 gallon vacuum fluid evacuator and filler set is a pneumatic extractor and dispenser kit designed to remove and refill transmission fluids quickly and cleanly using compressed air and 15 ATF adapters.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, workshop-ready kit combines a 6 L (1.6 gal) polyethylene reservoir, three durable hoses, an easy-change two-way rotary valve, and a set of 15 aluminum ATF adapters so you can evacuate old fluid and introduce new fluid without spills or messy jerry cans. Built for repeated garage use, its clear hoses and pressure gauge provide visual feedback while the included case and hangers keep accessories within reach.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the unit extract and dispense fluid?\u003c\/h3\u003e\n\u003cp\u003eThe system uses compressed air to create strong vacuum suction for extraction and lower-pressure air for dispensing. A two-way rotary valve lets you switch modes instantly, while a safety valve prevents overpressure events.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses up to 170 psi for extraction and 36 psi for dispensing\u003c\/li\u003e\n  \u003cli\u003eTwo-way rotary valve for quick mode switching\u003c\/li\u003e\n  \u003cli\u003eIntegrated safety valve pops up if pressure gets too high\u003c\/li\u003e\n  \u003cli\u003eTrigger lock enables hands-free continuous dispensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and fittings are supported?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with 15 ATF refill adapters to fit most Asian, European, and domestic automatic transmissions and fluid reservoirs. Adapters are crafted from 6061 aluminum for corrosion resistance and long service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e15 ATF adapters cover common OEM fill ports and service ports\u003c\/li\u003e\n  \u003cli\u003e1\/4\" NPT air inlet for compatibility with standard compressors\u003c\/li\u003e\n  \u003cli\u003eAdapters and hoses resist heat and chemical wear for longevity\u003c\/li\u003e\n  \u003cli\u003eCompact case organizes adapters and small accessories for field use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and usability features does it include?\u003c\/h3\u003e\n\u003cp\u003eThe design emphasizes safe, repeatable operation with visual and mechanical safeguards so you can work faster without guessing. Transparent tubing and a built-in pressure gauge let you monitor fluid condition and system pressure in real time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTransparent hoses reveal flow and fluid clarity during transfers\u003c\/li\u003e\n  \u003cli\u003eBuilt-in pressure gauge shows working air pressure at a glance\u003c\/li\u003e\n  \u003cli\u003eNitrile-coated gloves included to reduce skin contact with oils\u003c\/li\u003e\n  \u003cli\u003eHangers and trigger lock improve ergonomics during extended jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the construction for regular shop use?\u003c\/h3\u003e\n\u003cp\u003eMaterials were selected to withstand repeated exposure to automotive fluids and workshop environments. Rigid polyurethane, nylon, polyethylene, and anodized aluminum components resist chemical attack and heat so the kit remains reliable over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePolyethylene reservoir resists cracking and chemical degradation\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum adapters resist corrosion and physical wear\u003c\/li\u003e\n  \u003cli\u003eThree rigid polyurethane\/nylon hoses maintain shape under vacuum\u003c\/li\u003e\n  \u003cli\u003eSturdy carrying case protects components when not in use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Orion Motor Tech 1.6 gallon vacuum evacuator and filler set is intended for DIYers, independent mechanics, and fleet technicians who perform regular ATF changes or fluid flushes and want a cleaner, faster alternative to pump-and-pour methods. If you need a durable, portable tool that reduces spills, gives visual control, and adapts to many vehicles, this kit is built for routine shop or garage service without specialized plumbing or lifts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this with any air compressor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit uses a 1\/4\" NPT air inlet and runs on typical shop compressors; follow the pressure limits in the manual (max 170 psi for extraction).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it include adapters for most cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set includes 15 aluminum ATF adapters designed to fit most domestic, Asian, and European automatic transmission fill ports.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584898826425,"sku":"B09NDGGPHT","price":190.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view-kit.jpg?v=1790458243"},{"product_id":"orion-motor-tech-4-cfm-vacuum-pump-gauge-kit-1-3-hp-single-stage-r134a-r22-r410a-compatible","title":"Orion Motor Tech 4 CFM Vacuum Pump \u0026 Gauge Kit — 1\/3 HP Single-Stage, R134a\/R22\/R410a Compatible","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's OMT 4 CFM 1\/3 HP 1-stage vacuum pump and gauge set is a complete automotive and HVAC evacuation kit built to pull a strong vacuum, read refrigerant pressures, and support service on R134a, R22, and R410a systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit combines a 1\/3 HP single-stage vacuum pump with a 4-way manifold gauge, leak detector, can taps, quick couplers, R410a adapters, vacuum oil, and four reinforced hoses — packaged to serve both technicians and DIYers who work on vehicle or small HVAC systems. The pump’s copper motor and aluminum alloy body prioritize reliable evacuation and heat dissipation, while the accessories let you connect, monitor, and finish jobs without sourcing extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow strong and fast is the pump for evacuating systems?\u003c\/h3\u003e\n\u003cp\u003eThe pump delivers a 4 CFM flow rate driven by a 1\/3 HP all-copper motor, suitable for pulling deep vacuums on automotive and small residential HVAC lines. An aluminum alloy housing helps dissipate heat during continuous use and brass-fitted tethered caps reduce the chance of oil spills or contamination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4 CFM flow rate for efficient evacuation\u003c\/li\u003e\n  \u003cli\u003e1\/3 HP copper motor for consistent performance\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy casing for enhanced heat dissipation\u003c\/li\u003e\n  \u003cli\u003eBrass-fitted tethered safety caps to prevent oil leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat monitoring and connection tools come with the set?\u003c\/h3\u003e\n\u003cp\u003eThe included 4-way manifold gauge gives live pressure readings and works with the color-coded charging hoses to manage multiple service lines. Hoses are multi-layered for durability and rated to handle high working pressures, while quick couplers and R134a can taps let you attach refrigerant cans or service ports quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-accuracy manifold gauge for real-time monitoring\u003c\/li\u003e\n  \u003cli\u003eColor-coded hoses with four layers for strength and safety\u003c\/li\u003e\n  \u003cli\u003eQuick couplers and R134a can taps for fast connections\u003c\/li\u003e\n  \u003cli\u003eR410a adapters included for wider refrigerant compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit handle maintenance and user convenience?\u003c\/h3\u003e\n\u003cp\u003eDesign features like a cooling fan, sight glass, and bottom drain valve simplify daily use and upkeep. The sight glass makes oil level checks fast, the drain valve speeds oil changes, and the built-in cooling fan reduces heat buildup during prolonged sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in cooling fan to manage operating temperature\u003c\/li\u003e\n  \u003cli\u003eSight glass for quick vacuum oil inspection\u003c\/li\u003e\n  \u003cli\u003eBottom drain valve for fast oil changes\u003c\/li\u003e\n  \u003cli\u003eIncludes 0.26 qt. vacuum oil so you can start right away\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich refrigerants and jobs is this kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis set supports common service refrigerants including R134a, R22, and R410a, making it a flexible choice for vehicle air conditioning and small residential HVAC tasks. The adapters and hoses help you move between systems without buying separate heads or fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with R134a, R22, and R410a refrigerants\u003c\/li\u003e\n  \u003cli\u003eSuitable for automotive A\/C and smaller indoor HVAC systems\u003c\/li\u003e\n  \u003cli\u003eIncludes adapters and fittings for cross-compatibility\u003c\/li\u003e\n  \u003cli\u003eDurable storage case and bag for transport and organization\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians and experienced DIYers who perform regular A\/C service on cars or small HVAC systems and need a ready-to-use vacuum and manifold solution. If you require a portable, complete evacuation kit with accurate gauges, reinforced hoses, and common refrigerant compatibility, this Orion Motor Tech set supplies the core tools to prep, evacuate, and monitor refrigerant systems without hunting for extra components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this vacuum pump compatible with R134a and R410a?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes adapters and fittings to service R134a, R22, and R410a systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the set include vacuum oil and how much?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It comes with 0.26 quart of vacuum oil and a sight glass for level checks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584912916665,"sku":"B09CKQZ7KD","price":332.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view-kit_8e613ca9-dce3-4d0e-86e3-ddb08d1f7409.jpg?v=1790458834"},{"product_id":"orion-motor-tech-4-way-ac-manifold-gauge-set-5ft-hoses-for-r1234yf-r134a-r404a-oil-filled-gauges","title":"Orion Motor Tech 4-Way AC Manifold Gauge Set, 5ft Hoses for R1234yf\/R134a\/R404a — Oil-Filled Gauges","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's 4-way AC manifold gauge set is a complete, heavy-duty service kit for measuring, evacuating, and recharging R1234yf, R404a, and R134a systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional-grade manifold set combines durable construction with multi-refrigerant compatibility so technicians and DIYers can diagnose and service automotive and light HVAC systems. The kit pairs oil-filled and dry-core gauges, color-coded reinforced hoses, quick couplers, and adaptors so you can work accurately across refrigerants without switching tools. Built from aluminum and copper fittings, the set is designed to resist corrosion and deliver consistent readings under field conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWhat components come in this Orion Motor Tech manifold gauge kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a four-way manifold, four 5-foot color-coded hoses, two quick couplers for R1234yf and two for R134a, self-sealing can taps for both refrigerants, and two 1\/4\" male to 1\/2\" female adapters (left- and right-hand threads). All parts are sized and threaded for common automotive and HVAC service points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4-way aluminum manifold body with calibrated ports\u003c\/li\u003e\n  \u003cli\u003eHigh- and low-pressure gauges (oil-filled core + dry dial)\u003c\/li\u003e\n  \u003cli\u003eFour reinforced PVC hoses (5 ft each, color-coded)\u003c\/li\u003e\n  \u003cli\u003eTwo R1234yf quick couplers and two R134a quick couplers\u003c\/li\u003e\n  \u003cli\u003eSelf-sealing can taps for R1234yf and R134a refrigerants\u003c\/li\u003e\n  \u003cli\u003eTwo 1\/4\" male to 1\/2\" female adapters (LH \u0026amp; RH)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow accurate and durable are the gauges and fittings?\u003c\/h3\u003e\n\u003cp\u003eThe pressure gauges combine an oil-filled core for vibration resistance and a dry dial for improved cold-weather response, with calibration screws for accuracy within approximately 1.6%. Copper fittings and an aluminum manifold help prevent rust while maintaining service-life strength.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOil-filled core for wear and shock resistance\u003c\/li\u003e\n  \u003cli\u003eDry dial improves low-temperature performance\u003c\/li\u003e\n  \u003cli\u003eCalibration screws let you fine-tune readings\u003c\/li\u003e\n  \u003cli\u003eCopper fittings and aluminum manifold for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich refrigerants and applications is this set suitable for?\u003c\/h3\u003e\n\u003cp\u003eThis manifold set is engineered for R1234yf, R404a, and R134a systems, making it useful for automotive A\/C, small commercial HVAC tasks, and general maintenance jobs where these refrigerants are used. It supports pressure measurement, evacuation, and recharging steps when paired with standard service equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with R1234yf, R404a, and R134a refrigerants\u003c\/li\u003e\n  \u003cli\u003eUseful for automotive A\/C and light HVAC service\u003c\/li\u003e\n  \u003cli\u003eIncludes can taps and quick couplers for on-site recharging\u003c\/li\u003e\n  \u003cli\u003eHoses rated for high operating pressures with very high burst resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the hoses and couplers improve field work?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses color-coded PVC hoses with four reinforcement layers to keep flexibility while resisting kinking and pressure spikes. Quick couplers and self-sealing can taps reduce refrigerant loss and speed up connect\/disconnect steps during service, helping maintain a cleaner, safer workspace.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eColor-coded hoses for instant high\/low\/service identification\u003c\/li\u003e\n  \u003cli\u003eFour-layer reinforcement for up to 800 psi working pressure\u003c\/li\u003e\n  \u003cli\u003eHigh burst pressure (advertised 4000 psi) for extra safety margin\u003c\/li\u003e\n  \u003cli\u003eSelf-sealing taps and quick couplers minimize refrigerant escape\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Orion Motor Tech 4-way manifold kit suits mechanics, HVAC technicians, and experienced DIYers who need a versatile, rugged gauge set capable of handling modern refrigerants. It's a practical choice for technicians who require accurate gauges, durable fittings, and flexible hose lengths for roadside or shop diagnostics and recharging tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this manifold set work with R1234yf and R134a without extra tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes dedicated quick couplers and self-sealing can taps for both R1234yf and R134a to allow direct service on either refrigerant.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the hoses safe for high-pressure use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The color-coded hoses have four reinforcement layers rated for working pressures up to 800 psi and a very high burst-pressure specification for added safety.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584917864633,"sku":"B09PH68VG3","price":221.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-manifold.jpg?v=1790459083"},{"product_id":"orion-motor-tech-ac-manifold-gauge-set-3-way-5ft-hoses-for-r1234yf-r134a-r404a-with-oil-filled-gauges","title":"Orion Motor Tech AC manifold gauge set — 3-way, 5ft hoses for R1234yf\/R134a\/R404a with oil-filled gauges","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's OMT AC manifold gauge set is a three-way, professional-grade HVAC service kit with oil-filled high\/low gauges, three 5-foot color-coded hoses, and fittings for R1234yf, R404a and R134a work.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact manifold kit combines accuracy, durability and cross-compatible fittings so technicians and knowledgeable DIYers can measure pressures, evacuate systems, and recharge common automotive and light commercial refrigerants. The aluminum manifold, copper fittings and reinforced PVC hoses are built for repeated shop use, while calibration screws let you fine-tune readings for reliable troubleshooting.\u003c\/p\u003e\n\n\u003ch3\u003eHow accurate and durable are the gauges for everyday shop use?\u003c\/h3\u003e\n\u003cp\u003eThe OMT gauges use an oil-filled core on the high and low dials to dampen needle vibration and reduce wear from mechanical shock. A dry dial is included for improved cold-weather readability, and calibration screws let you adjust both gauges to better than 1.6% accuracy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOil-filled cores for vibration damping and longevity\u003c\/li\u003e\n  \u003cli\u003eDry dial option for low-temperature use\u003c\/li\u003e\n  \u003cli\u003eCalibration screws to correct minor drift\u003c\/li\u003e\n  \u003cli\u003eAccuracy specification within approximately 1.6%\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich refrigerants and service tasks can this set handle?\u003c\/h3\u003e\n\u003cp\u003eThis manifold kit is configured to work with modern and legacy refrigerants—R1234yf, R404a and R134a—making it suitable for automotive A\/C and many light commercial systems. The included quick couplers, self-sealing can taps, and adapters let you measure system pressures, evacuate lines, and perform controlled recharges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with R1234yf, R404a and R134a refrigerants\u003c\/li\u003e\n  \u003cli\u003eTwo quick couplers for R1234yf and two for R134a included\u003c\/li\u003e\n  \u003cli\u003eSelf-sealing can taps for safe refrigerant transfer\u003c\/li\u003e\n  \u003cli\u003e1\/4\" male to 1\/2\" female adapters for broader fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and performance features do the hoses and fittings offer?\u003c\/h3\u003e\n\u003cp\u003eThe kit’s color-coded PVC hoses have four reinforcement layers rated for high-pressure service and a 600 psi working pressure (3,000 psi burst rating), reducing the chance of failure during charging or evacuation. Pure copper fittings improve corrosion resistance and ensure reliable sealing at service ports.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFive-foot length hoses for reach and convenience\u003c\/li\u003e\n  \u003cli\u003eFour reinforced layers in each hose for pressure resilience\u003c\/li\u003e\n  \u003cli\u003eBright color-coding (standard red\/blue\/yellow) for quick connections\u003c\/li\u003e\n  \u003cli\u003eAluminum manifold with copper fittings to resist rust\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit save time during diagnostics and recharges?\u003c\/h3\u003e\n\u003cp\u003eThe three-way design streamlines simultaneous high\/low monitoring while the center service port and included adapters let you add or recover refrigerant without swapping connectors. Self-sealing can taps and quick couplers cut downtime and reduce refrigerant exposure during transfers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-way manifold for concurrent high\/low readings and service\u003c\/li\u003e\n  \u003cli\u003eCenter port for vacuum, recovery or recharge operations\u003c\/li\u003e\n  \u003cli\u003eQuick couplers and self-sealing taps speed hookups\u003c\/li\u003e\n  \u003cli\u003eAdapters expand compatibility with common fitting types\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT AC manifold gauge set is aimed at professional HVAC technicians, automotive A\/C specialists and competent DIYers who require a robust, versatile toolkit for servicing R1234yf, R404a and R134a systems. If you need accurate gauges, reinforced hoses, and a selection of fittings that let you diagnose, evacuate and recharge systems without repeatedly changing tools, this kit is a practical shop-ready choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this set compatible with R1234yf systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes quick couplers and a self-sealing can tap specifically for R1234yf service.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the hose working pressure rating?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each color-coded hose is rated for 600 psi working pressure with a 3,000 psi burst rating.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584918028473,"sku":"B09PH6ZJ2H","price":192.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-omt-front-view-manifold-gauge-set.jpg?v=1790459084"},{"product_id":"orion-motor-tech-4-way-automotive-ac-manifold-gauge-set-r134a-r410a-r22-brass-construction-moisture-indicator","title":"Orion Motor Tech 4-Way Automotive AC Manifold Gauge Set — R134a\/R410a\/R22, Brass Construction, Moisture Indicator","description":"\u003cb\u003eOrion Motor Tech's 4-way automotive AC manifold gauge set is a complete, heavy-duty tool kit for measuring, evacuating, and charging R134a, R410a, and R22 systems.\u003c\/b\u003e\n\n\u003cp\u003eThis manifold set combines hybrid anti-shock gauges, four color-coded high-strength hoses, brass fittings, and a moisture indicator to give technicians and DIYers a dependable way to diagnose and service vehicle and small HVAC air conditioning systems. Built from solid brass, ABS, and reinforced PVC, the kit is designed to withstand frequent use while keeping readings accurate and connections leak-resistant.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this set help diagnose AC pressure problems?\u003c\/h3\u003e\n\u003cp\u003eThe included high and low pressure gauges let you read system pressures quickly and compare them against expected values for common refrigerants. The hybrid anti-shock design balances responsiveness and durability so you get stable readings even in variable temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2.6\" gauges show both high and low sides with 1.6% calibration accuracy.\u003c\/li\u003e\n  \u003cli\u003eOil-filled core reduces wear and vibration; dry dial improves cold-weather readability.\u003c\/li\u003e\n  \u003cli\u003eMoisture indicator gives immediate visual feedback on refrigerant condition.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connections and adapters are included for charging and evacuation?\u003c\/h3\u003e\n\u003cp\u003eThis 4-way kit equips you to attach to service ports, charge from cans or tanks, and switch between different fitting sizes without extra adapters. Quick couplers and multiple adapter sizes make transitions fast and help prevent cross-threading or leaks during service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo adjustable 1\/4\" quick couplers for secure, tool-free attachment.\u003c\/li\u003e\n  \u003cli\u003e1\/2\" to 1\/4\" 29° trap adapter, 1\/4\" to 5\/16\" tank adapter, plus angled and straight 5\/16\" to 1\/4\" adapters.\u003c\/li\u003e\n  \u003cli\u003ePuncture-style can tap for easy use with service cans when topping off systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the manifold gauge set for frequent use?\u003c\/h3\u003e\n\u003cp\u003eThe kit is constructed for repeated professional or hobbyist use: brass fittings resist corrosion, multi-layer PVC hoses handle high working pressure, and calibration screws help maintain measurement accuracy over time. Protective features and robust materials help reduce service interruptions and tool replacement costs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid brass manifold and fittings for long-term corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eFour-layer PVC hoses rated for up to 800 psi working pressure (4,000 psi burst).\u003c\/li\u003e\n  \u003cli\u003eCalibration screws for maintaining gauge accuracy and an oil-filled core to minimize internal wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich refrigerants and systems can I service with this set?\u003c\/h3\u003e\n\u003cp\u003eThe manifold is compatible with the most common automotive and light HVAC refrigerants, enabling versatile use across vehicle air conditioners and smaller HVAC jobs. It supports pressure measurement, evacuation, and charging operations for multiple refrigerant types when used with proper safety procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with R134a, R410a, and R22 refrigerants.\u003c\/li\u003e\n  \u003cli\u003eSuitable for car AC systems, light HVAC maintenance, and retrofit-friendly workflows.\u003c\/li\u003e\n  \u003cli\u003eColor-coded hoses (blue low, red high, yellow charge, black evacuation) simplify correct hookups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Mechanics, HVAC technicians, and experienced DIYers who want a durable, multi-purpose manifold gauge set that handles common refrigerants and frequent use. If you perform routine vehicle AC diagnostics, need accurate pressure readings in varied temperatures, or require a kit with multiple adapters and a moisture indicator, this Orion Motor Tech set offers a practical balance of build quality, portability, and connectivity to get the job done.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this set measure and charge R134a systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Orion Motor Tech 4-way gauge set supports R134a, allowing pressure measurement, evacuation, and charging when used with correct procedures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the hoses durable enough for professional use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit's four-layer PVC hoses are rated for 800 psi working pressure and 4,000 psi burst pressure for heavy-duty use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584919994553,"sku":"B078GJQGYQ","price":179.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view-manifold-set.jpg?v=1790459187"},{"product_id":"orion-motor-tech-motorcycle-lift-1100-lb-scissor-jack-t-handle-3-8-socket-9-1x14-6-deck","title":"Orion Motor Tech Motorcycle Lift 1100 lb Scissor Jack — T-Handle \u0026 3\/8\" Socket, 9.1x14.6\" Deck","description":"\u003cb\u003eHeavy-duty motorcycle scissor lift that raises bikes up to 1100 lb from 3.7\" to 14.6\" using a T-handle or a 3\/8\" socket for workshop-ready stability.\u003c\/b\u003e\n\n\u003cp\u003eThis Orion Motor Tech OMT motorcycle lift is a manual scissor jack designed for home garages and professional shops who need a compact, reliable platform for routine maintenance and repairs. Built from heavy-gauge steel with a wide 9.1\" x 14.6\" deck and a rubberized tabletop, the lift combines a high 1100 lb capacity with secure locking and corrosion-resistant construction. It ships ready to use so you can start stabilizing and servicing cruisers, sportbikes, ATVs, and small dirt bikes right away.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the lift operate and what tools does it use?\u003c\/h3\u003e\n\u003cp\u003eOperation is straightforward: turn the included T-handle by hand or attach a 3\/8\" socket and ratchet to raise or lower the table. The mechanism is a screw-driven scissor design that provides controlled, incremental movement and fits many garage workflows.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManual T-handle for fine control and slower lifting to preserve the screw.\u003c\/li\u003e\n  \u003cli\u003e3\/8\" socket compatibility speeds lifting with a ratchet when needed.\u003c\/li\u003e\n  \u003cli\u003eScrew-driven scissor action delivers smooth, stable elevation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it safe and stable enough for routine maintenance?\u003c\/h3\u003e\n\u003cp\u003eYes — the lift’s wide deck and mechanical safety bar produce a stable working surface once the bike is raised. After lifting, place the safety bar into one of five locking holes to prevent accidental descent and maintain a fixed height for safe under-bike access.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e9.1\" x 14.6\" deck for broader footprint and better balance.\u003c\/li\u003e\n  \u003cli\u003eFive indexed locking positions with a steel safety bar for secure locks.\u003c\/li\u003e\n  \u003cli\u003eRubber tabletop grips tires and frame to reduce slippage during work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and durability features?\u003c\/h3\u003e\n\u003cp\u003eThe stand uses heavy-duty steel with plug welding and a double crossbar frame that increases rigidity and resilience during repeated use. A corrosion-resistant finish helps the lift endure garage conditions while welded joints improve appearance and long-term strength.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-gauge steel construction rated to 1100 lb capacity.\u003c\/li\u003e\n  \u003cli\u003ePlug-welded seams and double crossbar reinforcement for durability.\u003c\/li\u003e\n  \u003cli\u003eProtective coating and rubber tabletop for corrosion resistance and grip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich motorcycles and situations is this lift best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis scissor jack fits a wide range of two- and three-wheeled vehicles where a compact, portable lift is preferred. It’s ideal for routine servicing, chain adjustments, tire changes, brake work, and winter storage preparation when a stable platform is necessary but a large hydraulic lift is impractical.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmall to mid-size cruisers, sportbikes, dirt bikes, ATVs and scooters.\u003c\/li\u003e\n  \u003cli\u003eHome mechanics, mobile technicians, and small repair shops needing portability.\u003c\/li\u003e\n  \u003cli\u003eSituations requiring controlled manual lifting and secure locking positions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you need a compact, heavy-duty bench-style lift that’s easy to store and simple to operate, the Orion Motor Tech OMT 1100 lb scissor motorcycle lift is a practical choice. It serves home mechanics and small shops that want a reliable manual jack with a stable platform, positive locking, and durable construction — without the footprint or cost of a full-size hydraulic lift. Follow safe lifting practices, use the safety bar after raising, and avoid powering the screw mechanism with high-torque impact tools to prolong the screw life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum weight capacity?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The OMT lift supports up to 1100 lb (500 kg) when used on a stable, level surface.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use power tools to raise it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Manual operation is recommended; avoid high-torque power tools to prevent premature screw wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584925466809,"sku":"B08FZWR9SX","price":225.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view-lift.jpg?v=1790459373"},{"product_id":"orion-motor-tech-wheel-hub-removal-tool-kit-5-6-8-lug-hub-buster-with-heat-treated-forcing-screw-and-blow-molded-case","title":"Orion Motor Tech wheel hub removal tool kit — 5\/6\/8-lug hub buster with heat-treated forcing screw and blow-molded case","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech OMT Wheel Hub Removal Tool Kit is a professional-grade hub buster puller set designed to remove stubborn wheel hubs quickly and without harming axles or surrounding components.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf a seized wheel hub is holding up a repair, this compact kit gives you the leverage and durability needed to free hubs from cars and light trucks with 5-, 6- or 8-lug configurations. All components fit into a blow-molded case for easy transport and storage, and the set is constructed from high-strength steels with a corrosion-resistant finish to withstand repeated use in the garage or on the road.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tool kit remove a stuck wheel hub safely?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses a remover plate that bears against the hub face while a heat-treated forcing screw presses on the axle or hub bore to separate the hub. This controlled, axial force avoids hammer strikes that could damage bearings or threads. The included washers and screw assembly distribute the load evenly for predictable removal.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemover plate centers on the hub to apply even pressure\u003c\/li\u003e\n\u003cli\u003eForcing screw is heat-treated for high compressive load\u003c\/li\u003e\n\u003cli\u003eWashers and assembly parts prevent direct metal-on-metal wear\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant finish maintains smooth operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and what materials are they made from?\u003c\/h3\u003e\n\u003cp\u003eThe set contains a remover plate, a forcing screw, a screw assembly and two washers, all housed in a custom blow-molded case. Critical load-bearing pieces are made from AISI 1045 and 40Cr steel for proven strength, while the forcing screw receives a heat-treatment step for added durability. The finish helps resist rust even after exposure to shop fluids.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemover plate: durable steel plate for centered pulling\u003c\/li\u003e\n\u003cli\u003eForcing screw: heat-treated for extended life under load\u003c\/li\u003e\n\u003cli\u003eScrew assembly and washers: precision fit to reduce slippage\u003c\/li\u003e\n\u003cli\u003eBlow-molded case: organized storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use this hub buster on a vehicle?\u003c\/h3\u003e\n\u003cp\u003eSetup is straightforward: position the remover plate over the hub, assemble the screw and washers, then tighten the forcing screw until the hub separates. The kit ships with clear instructions so you can complete the procedure without improvising extra tools. Because it applies steady axial force, you’ll usually avoid repeated hammering that complicates repairs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple hand tools required for initial mounting\u003c\/li\u003e\n\u003cli\u003eStep-by-step instructions included in the case\u003c\/li\u003e\n\u003cli\u003eDesigned for repeatable, one-person operation\u003c\/li\u003e\n\u003cli\u003eCompact case keeps all pieces together for mobile repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit work on my vehicle's lug pattern and axle type?\u003c\/h3\u003e\n\u003cp\u003eThe Orion Motor Tech hub remover is built to accommodate common 5-, 6- and 8-lug wheel hubs found on many cars and light trucks. While it covers a wide range of applications, confirm fitment against hub diameter and axle bore on your specific vehicle before use. For specialized or heavy commercial axles, check manufacturer guidelines or consult a mechanic.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 5-, 6- and 8-lug wheel hubs\u003c\/li\u003e\n\u003cli\u003eWorks on many passenger cars and light trucks\u003c\/li\u003e\n\u003cli\u003eNot intended for large commercial axle assemblies without verification\u003c\/li\u003e\n\u003cli\u003eMeasure hub face and bore for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT Wheel Hub Removal Tool Kit is built for DIY mechanics, mobile technicians and professional shops that need a reliable, portable solution for freeing stubborn hubs without damaging axles. If you perform regular brake, bearing or hub service on passenger vehicles or light trucks and want a durable, repeatable method to remove hubs, this kit provides the core components and strength to make the job faster and safer.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit remove hubs on 6-lug trucks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit supports common 5-, 6- and 8-lug hubs on many cars and light trucks; verify hub diameter before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the forcing screw corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The forcing screw is heat-treated and finished to resist corrosion for longer service life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584931856569,"sku":"B0DNR7RD59","price":234.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-packaging_a11eab33-65b3-489e-8efd-39ddb690bed3.jpg?v=1790459568"},{"product_id":"orion-motor-tech-5-cfm-sparkless-hvac-vacuum-pump-r1234yf-r32-compatible-1-5-micron-deep-vacuum-14-9-fl-oz-oil","title":"Orion Motor Tech 5 CFM Sparkless HVAC Vacuum Pump — R1234yf\/R32 Compatible, 1.5 Micron Deep Vacuum, 14.9 fl. oz. Oil","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech OMT 5 CFM sparkless vacuum pump is a compact, ignition-proof pump built to evacuate HVAC and automotive refrigerant systems down to 1.5 microns while safely handling mildly flammable A2L refrigerants.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pump blends sparkless safety features with a powerful 3450 rpm motor to speed up evacuations for systems charged with R1234yf, R32, R134a, R22, R410A and similar refrigerants. Designed for technicians, hobbyists, labs and packaging applications, it balances portability, low noise and reduced oil mist for cleaner, more comfortable work environments. The 14.9 fl. oz. oil reservoir, reinforced base and ergonomic handle make it practical for repeated field use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sparkless vacuum pump improve safety when working with A2L refrigerants?\u003c\/h3\u003e\n\u003cp\u003eThe OMT pump incorporates an ignition-proof ON\/OFF switch and sparkless design to minimize ignition risk when evacuating mildly flammable refrigerants. Safety features are paired with an oil mist-reducing cap and a double-layer baffle to keep the work area cleaner.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIgnition-proof ON\/OFF switch for safer startup and shutdown\u003c\/li\u003e\n  \u003cli\u003eSparkless internal components reduce ignition potential\u003c\/li\u003e\n  \u003cli\u003eOil mist-free cap and baffle limit aerosolized oil\u003c\/li\u003e\n  \u003cli\u003eReinforced base adds stability during operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly and deeply can the pump evacuate an HVAC or automotive system?\u003c\/h3\u003e\n\u003cp\u003eEquipped with a 3450 rpm motor, the pump delivers rated 5 CFM flow to speed evacuation times on most small-to-medium systems. It can pull down to approximately 1.5 microns (0.2 Pa), enabling technicians to reach the deep vacuum levels needed for reliable leak testing and system charging preparations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3450 rpm motor for sustained pumping performance\u003c\/li\u003e\n  \u003cli\u003e5 CFM flow rate to move air and vapor efficiently\u003c\/li\u003e\n  \u003cli\u003eRated to 1.5 microns (0.2 Pa) for deep evacuations\u003c\/li\u003e\n  \u003cli\u003e14.9 fl. oz. oil capacity reduces refill frequency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features reduce maintenance, oil spray and noise on the job?\u003c\/h3\u003e\n\u003cp\u003eThe pump's oil management and sound control features reduce cleanup and operator fatigue. A double-layer baffle and angled drain cut down on oil spray while an oil mist-free combined fill\/exhaust cap minimizes airborne oil. Operating noise stays at or below 70 dB for a quieter workspace.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-layer baffle to limit oil spray and foaming\u003c\/li\u003e\n  \u003cli\u003eOil mist-free fill\/exhaust cap for cleaner operation\u003c\/li\u003e\n  \u003cli\u003eAngled oil drain for easier, more complete oil changes\u003c\/li\u003e\n  \u003cli\u003eSound level designed at or below 70 dB for comfort\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fittings, applications and portability features does it support?\u003c\/h3\u003e\n\u003cp\u003eThis compact vacuum pump accepts common fitting sizes and fits a variety of job types from HVAC service to lab setups and packaging. Its lightweight profile and ergonomic handle make it easy to move between trucks, benches and job sites.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 1\/4\" SAE and 1\/2\" ACME fittings\u003c\/li\u003e\n  \u003cli\u003eCompact footprint and ergonomic handle for portability\u003c\/li\u003e\n  \u003cli\u003eSuitable for HVAC, automotive, lab and packaging tasks\u003c\/li\u003e\n  \u003cli\u003eReinforced bottom for stable placement during use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT 5 CFM sparkless vacuum pump is aimed at HVAC and automotive technicians, refrigeration students, lab technicians and small-shop professionals who need a reliable, portable evacuation tool that balances safety for mildly flammable refrigerants with strong pull-down performance. If you require a pump that reduces oil mist, limits noise and works with common fittings while delivering 5 CFM and deep vacuum capability, this model is built to meet those routine service and testing needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this pump handle R1234yf and other mildly flammable refrigerants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ignition-proof switch and sparkless design make it suitable for evacuating A2L refrigerants like R1234yf when used per safety guidelines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the deepest vacuum this pump can reach?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This pump is rated to pull down to about 1.5 microns (0.2 Pa), suitable for deep evacuations and leak testing preparation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584932741305,"sku":"B0DPKVPMH2","price":325.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view-pump.jpg?v=1790459634"},{"product_id":"orion-motor-tech-4-cfm-single-stage-vacuum-pump-37-5-micron-deep-pull-1-3-hp-motor-kit","title":"Orion Motor Tech 4 CFM Single-Stage Vacuum Pump — 37.5 Micron Deep Pull, 1\/3 HP Motor (Kit)","description":"\u003cstrong\u003eOrion Motor Tech’s 4 CFM single-stage vacuum pump is a portable HVAC service unit that draws down to 37.5 microns and is supplied as a complete kit for automotive and light commercial refrigerant work.\u003c\/strong\u003e\n\n\u003cp\u003eThis single-stage vacuum pump from Orion Motor Tech pairs a 1\/3 hp all-copper motor with a 4 CFM pumping rate to speed evacuation of AC and refrigeration lines. Built for routine maintenance and system repairs, the unit supports common refrigerants including R12, R22, R134a, R410a and R502. Durable construction and a small footprint make it suitable for technicians who need reliable, repeatable vacuum performance in the field.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast and deep can this pump evacuate an AC system?\u003c\/h3\u003e\n\u003cp\u003eThe pump delivers a 4 cubic feet per minute (CFM) flow rate and is able to pull down to approximately 37.5 microns (5 Pa), which allows technicians to remove air and moisture efficiently prior to charging. The single-stage design balances performance and simplicity for most automotive and light HVAC jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4 CFM continuous flow for quicker evacuations\u003c\/li\u003e\n  \u003cli\u003eMinimum vacuum ~37.5 microns (5 Pa) for effective moisture removal\u003c\/li\u003e\n  \u003cli\u003eCompatible with common HVAC refrigerants (R12, R22, R134a, R410a, R502)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features help with durability and maintenance?\u003c\/h3\u003e\n\u003cp\u003eConstruction uses a reinforced aluminum-alloy housing to dissipate heat and resist corrosion in workshop environments. An intake filter and internal trap protect the pump from particulates and oil mist, extending service intervals and maintaining steady performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum-alloy casing for heat dispersion and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eIntake filter and trap to block contaminants and oil carryover\u003c\/li\u003e\n  \u003cli\u003eSight glass and oil level scale for quick inspections and refills\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat convenience and safety features are included for field work?\u003c\/h3\u003e\n\u003cp\u003eThe pump is built for portability with a nonslip handle and a compact footprint that fits service trunks and benches. The packaged kit includes lubricating oil, an absorptive cartridge, gloves, and Teflon tape so technicians can start work immediately and maintain proper seals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNonslip handle for safe transport and placement\u003c\/li\u003e\n  \u003cli\u003eOil reservoir with sight glass and scale for visual checks\u003c\/li\u003e\n  \u003cli\u003eKit items: pump oil, absorptive oil, gloves, and Teflon tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich hose sizes and applications work with this pump?\u003c\/h3\u003e\n\u003cp\u003eThe pump accepts standard 1\/4\", 3\/8\", and 1\/2\" hoses, making it compatible with most service manifolds and line sets. Beyond automotive HVAC, the unit is versatile enough for vacuum packaging, wine degassing, thermoforming, and other light industry uses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 1\/4\", 3\/8\", and 1\/2\" hose fittings\u003c\/li\u003e\n  \u003cli\u003eSuitable for automotive HVAC and small commercial refrigeration work\u003c\/li\u003e\n  \u003cli\u003eAlso useful for non-refrigerant tasks: packaging, degassing, thermoforming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians and DIY-minded owners who need a dependable, portable vacuum pump for routine air and moisture evacuation. The Orion Motor Tech 4 CFM single-stage model is tailored for automotive HVAC service, light commercial refrigeration work, and workshop projects that require a compact pump capable of achieving deep vacuum levels. If you want a field-ready kit with visible oil monitoring and built-in protection against contaminants, this unit is designed to simplify set-up and shorten service times.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this pump evacuate R134a and R410a systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 4 CFM single-stage pump is compatible with R134a and R410a and is suitable for standard automotive and light HVAC evacuations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include oil and sealing materials?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains lubricating oil, an absorptive cartridge, gloves, and Teflon tape for immediate use and secure connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584932872377,"sku":"B08P1WRZ1S","price":200.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view.jpg?v=1790459632"},{"product_id":"orion-motor-tech-4-5-cfm-single-stage-vacuum-pump-kit-1-3-hp-copper-motor-aluminum-body","title":"Orion Motor Tech 4.5 CFM Single-Stage Vacuum Pump Kit — 1\/3 hp Copper Motor, Aluminum Body","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech OMT 4.5 CFM single-stage vacuum pump is a portable HVAC service unit designed to evacuate automotive and light commercial AC systems down to deep vacuum levels for refrigerants including R134a, R410a and R22.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt around a robust 1\/3 hp all-copper motor and an aluminum-alloy housing, this pump balances power, corrosion resistance and heat dissipation for routine air conditioning maintenance. It ships as a service kit with pump oil, gloves and Teflon tape so technicians and DIYers can start evacuating systems right away. The pump is compatible with common refrigeration hoses and is useful for automotive AC work, small HVAC systems and a variety of shop applications requiring controlled vacuum.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast and deep can this pump evacuate an AC system?\u003c\/h3\u003e\n\u003cp\u003eThe OMT pump delivers a 4.5 cubic feet per minute (CFM) flow rate and is rated to pull down to about 37.5 microns (approximately 5 Pa), giving you a strong, quick evacuation for most automotive and light commercial circuits. That performance helps remove moisture and non-condensables so charging and diagnostics are more reliable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4.5 CFM flow for efficient evacuation\u003c\/li\u003e\n  \u003cli\u003eRated to ~37.5 microns (5 Pa) deep vacuum\u003c\/li\u003e\n  \u003cli\u003eSuitable for R12, R22, R134a, R410a and R502 systems\u003c\/li\u003e\n  \u003cli\u003e1\/3 hp copper motor promotes steady torque under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat design features keep the pump durable and easy to use?\u003c\/h3\u003e\n\u003cp\u003eDurability comes from a reinforced aluminum-alloy casing that sheds heat and resists corrosion during repeated service cycles. Practical touches like an intake filter\/trap and a visible oil sight glass simplify maintenance while reducing the risk of contamination or premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy body for improved cooling and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eIntake filter and trap minimize oil mist and particulates\u003c\/li\u003e\n  \u003cli\u003eSight glass and oil level scale for fast checks and refills\u003c\/li\u003e\n  \u003cli\u003eNonslip handle for safer transport between jobsites\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accessories and connections are included in the service kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes essential consumables and basic accessories so the pump is service-ready out of the box: a bottle of lubricating\/absorptive oil, disposable gloves, and Teflon sealing tape for threaded joins. The pump accepts standard 1\/4\", 3\/8\" and 1\/2\" hose fittings, making it compatible with most gauge sets and hoses used in automotive and light HVAC work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLubricating\/absorptive oil supplied for initial use\u003c\/li\u003e\n  \u003cli\u003eOne-size-fits-most gloves for clean oil handling\u003c\/li\u003e\n  \u003cli\u003eTeflon tape to ensure leak-free threaded connections\u003c\/li\u003e\n  \u003cli\u003eWorks with 1\/4\", 3\/8\" and 1\/2\" hose fittings for broad compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this pump be used beyond vehicle air conditioning systems?\u003c\/h3\u003e\n\u003cp\u003eYes — its steady vacuum capability and portability make it useful for several workshop and light industrial tasks beyond automotive HVAC. Typical secondary uses include vacuum packaging, degassing liquids like wine, thermoforming small sheets, and other applications that require a controlled low-pressure environment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVacuum packaging and small-scale food processing applications\u003c\/li\u003e\n  \u003cli\u003eDegassing liquids such as oils or wines prior to bottling\u003c\/li\u003e\n  \u003cli\u003eThermoforming and small vacuum molding projects\u003c\/li\u003e\n  \u003cli\u003eGeneral laboratory or shop evacuations for maintenance tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, independent mechanics and informed DIYers who perform regular automotive or light commercial AC service will appreciate the OMT 4.5 CFM pump’s combination of evacuation speed, durable construction and included starter accessories. It’s also a good option for hobbyists and small shops needing a reliable, portable vacuum source for packaging, degassing or thermoforming tasks without investing in larger industrial equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which refrigerants can this pump service?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports common refrigerants including R12, R22, R134a, R410a and R502.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include pump oil and sealing tape?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package includes lubricating\/absorptive oil, gloves and Teflon tape for initial setup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584933232825,"sku":"B08P1W6Z8D","price":213.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-omt-front-view-pump.jpg?v=1790459653"},{"product_id":"orion-motor-tech-4-5-cfm-single-stage-vacuum-pump-for-auto-hvac-37-5-micron-1-3-hp-copper-motor","title":"Orion Motor Tech 4.5 CFM Single-Stage Vacuum Pump for Auto \u0026 HVAC — 37.5 Micron, 1\/3 HP Copper Motor","description":"\u003cstrong\u003eOrion Motor Tech's OMT 4.5 CFM single-stage vacuum pump is a portable, service-ready tool designed to evacuate automotive and light HVAC systems down to 37.5 microns for fast, reliable refrigerant system servicing.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact vacuum pump combines a 1\/3 hp all-copper motor with a 4.5 CFM flow rate to pull deep vacuums suitable for systems using R12, R22, R134a, R410a and R502 refrigerants. Built with a reinforced aluminum alloy housing, the unit disperses heat efficiently and resists corrosion, while an intake filter and internal trap protect the pump from contaminants and oil carryover. The kit arrives with pump oil, gloves and Teflon tape so you can start jobs without searching for accessories.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this pump evacuate an automotive AC system?\u003c\/h3\u003e\n\u003cp\u003eThe pump's 4.5 CFM flow and 1\/3 hp copper-wound motor deliver steady suction for routine automotive and small commercial HVAC evacuations. In typical automotive systems it reaches deep vacuum levels efficiently, reducing wait time on service bays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated 4.5 cubic feet per minute flow for consistent evacuation\u003c\/li\u003e\n  \u003cli\u003eMotor: 1\/3 horsepower, all-copper windings for reliable torque\u003c\/li\u003e\n  \u003cli\u003eService depth: capable of drawing to 37.5 microns (≈5 Pa)\u003c\/li\u003e\n  \u003cli\u003eEffective for R12, R22, R134a, R410a and R502 systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features protect the pump during everyday use?\u003c\/h3\u003e\n\u003cp\u003eDurability and simple maintenance are built in: an aluminum alloy shell sheds heat and limits corrosion, while an intake filter and internal trap block particulates and oil mist. A sight glass and oil-level scale make monitoring straightforward, helping avoid overfill or dry-running.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced aluminum alloy casing for heat dissipation and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eIntake filter plus trap guard against contaminants and oil carryover\u003c\/li\u003e\n  \u003cli\u003eSight glass and fill scale let you check oil at a glance\u003c\/li\u003e\n  \u003cli\u003eNonslip handle for safer transport between jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich accessories are included and what hose sizes does it support?\u003c\/h3\u003e\n\u003cp\u003eThe pump kit is prepared for immediate use and includes lubricating\/absorptive oil, a pair of gloves, and Teflon tape for sealing threaded fittings. The inlet fits common service hoses so you can connect to 1\/4\", 3\/8\" or 1\/2\" lines depending on the job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes pump oil suitable for vacuum service and absorption\u003c\/li\u003e\n  \u003cli\u003eGloves provided for safe oil handling during refills\u003c\/li\u003e\n  \u003cli\u003eTeflon tape for leak-free threaded connections\u003c\/li\u003e\n  \u003cli\u003eCompatible with 1\/4\", 3\/8\" and 1\/2\" hoses for versatility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and service-friendly is the pump for fieldwork?\u003c\/h3\u003e\n\u003cp\u003eThe unit's compact footprint and nonslip handle make it easy to move from vehicle to workshop. Sight glass monitoring plus included consumables reduce the trips back to the parts bin so you can complete jobs faster.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact, lightweight design suited for mobile technicians\u003c\/li\u003e\n  \u003cli\u003eNonslip handle for stable carrying and placement\u003c\/li\u003e\n  \u003cli\u003eAll-in-one kit minimizes accessory needs on the job\u003c\/li\u003e\n  \u003cli\u003eDurable construction for repeated field use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT 4.5 CFM single-stage vacuum pump is aimed at mobile mechanics, independent HVAC technicians, and DIYers who service automotive or light commercial refrigeration systems and need a portable, dependable evacuation tool. It’s especially useful when you require quick deep-vacuum pulls, straightforward maintenance checks, and a kit that arrives ready to use without extra purchases.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What vacuum depth can the OMT 4.5 CFM pump reach?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It can pull down to about 37.5 microns (≈5 Pa), making it suitable for most automotive and light HVAC evacuations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the pump compatible with R134a and R410a systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pump is compatible with R12, R22, R134a, R410a and R502 refrigerant systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584933298361,"sku":"B09R237QKM","price":206.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-omt-front-view.jpg?v=1790459653"},{"product_id":"orion-motor-tech-3-5-cfm-a2l-single-stage-vacuum-pump-sparkless-15-micron-pull-down","title":"Orion Motor Tech 3.5 CFM A2L Single-Stage Vacuum Pump — Sparkless, 15 Micron Pull-Down","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech 3.5 CFM A2L single-stage vacuum pump is a sparkless, compact evacuator engineered to safely and quickly pull down refrigeration and automotive A\/C systems using R1234yf, R32, R134a, R22, and R410A.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pump combines a spark-proof ON\/OFF switch with 3.5 CFM pumping capacity and a 1720 rpm motor to deliver fast evacuation down to 15 microns (2 Pa). Built with a 13.5 fl. oz. oil reservoir, an oil-mist-reducing cap, and a reinforced base, it balances safety, uptime, and portability for HVAC technicians, mechanics, and lab technicians working with mildly flammable refrigerants.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this pump keep work areas safer when handling A2L refrigerants?\u003c\/h3\u003e\n\u003cp\u003eOrion Motor Tech designed the pump with an ignition-proof (sparkless) ON\/OFF switch and oil-mist reduction to lower ignition risk around mildly flammable refrigerants. The construction reduces sources of sparks and minimizes airborne oil particles that can create hazards in enclosed spaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSparkless ON\/OFF switch prevents ignition from electrical arcing.\u003c\/li\u003e\n  \u003cli\u003eOil mist-free cap on the combined oil fill\/exhaust port reduces aerosolized oil.\u003c\/li\u003e\n  \u003cli\u003eReinforced, stable base minimizes accidental tipping during use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast and deep can it evacuate different A\/C systems?\u003c\/h3\u003e\n\u003cp\u003eThis single-stage pump runs at 1720 rpm and provides 3.5 CFM, enabling rapid pull-downs for typical HVAC and automotive systems. It is rated to reach down to 15 microns (2 Pa) in practical use, with the nameplate noting an ultimate total pressure of 150 microns and an ultimate partial pressure of 2 Pa.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3.5 CFM pumping speed for quicker evacuations.\u003c\/li\u003e\n  \u003cli\u003eOperational pull-down capability to about 15 microns (2 Pa).\u003c\/li\u003e\n  \u003cli\u003eNameplate “Ultimate Vacuum” indicates 150 micron total pressure, 2 Pa partial pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features make it user-friendly for long jobs and frequent transport?\u003c\/h3\u003e\n\u003cp\u003eThe 13.5 fl. oz. oil tank reduces refill frequency, while a double-layer baffle limits oil spray during prolonged operation. Ergonomic elements—like the molded handle, angled oil drain, and compact footprint—make it easy to carry, store, and maintain between jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e13.5 fl. oz. reservoir for extended runtimes and fewer oil top-ups.\u003c\/li\u003e\n  \u003cli\u003eDouble-layer baffle to reduce internal oil spray.\u003c\/li\u003e\n  \u003cli\u003eAngled oil drain and reinforced bottom for simple, stable maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it integrate with my existing service tools and fittings?\u003c\/h3\u003e\n\u003cp\u003eThe pump accepts common 1\/4\" SAE and 1\/2\" ACME connections, so it pairs with industry-standard manifold sets and hoses. Its compact design and universal fittings make it suitable across HVAC, automotive A\/C, lab evacuations, and packaging applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 1\/4\" SAE fittings for service hoses.\u003c\/li\u003e\n  \u003cli\u003eIncludes 1\/2\" ACME compatibility for broader tool interoperability.\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits toolboxes and service carts easily.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technicians and pros who need a portable, safety-minded vacuum pump capable of handling mildly flammable A2L refrigerants and mainstream refrigerant blends will appreciate this model. It fits mobile automotive shops, HVAC service vans, lab benches, and field service kits where sparkless operation, reasonable pull-down performance, and low oil mist are priorities. If you require faster multi-stage deep vacuums for specialized laboratory work or ultralow ultimate pressures beyond the pump’s nameplate specs, consider pairing this unit with a two-stage pump or a dedicated deep-vacuum system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pump safe for mildly flammable A2L refrigerants?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It features a sparkless ON\/OFF switch and oil-mist reduction to enhance safety when working with A2L refrigerants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What ultimate vacuum can it achieve?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Operationally it pulls down to about 15 microns (2 Pa); the nameplate notes 150 microns ultimate total pressure and 2 Pa partial pressure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584934215865,"sku":"B0DPKTLF5L","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view-pump_d59455af-780b-4d9b-b632-9e54387e2b8e.jpg?v=1790459699"},{"product_id":"orion-motor-tech-3-5-cfm-single-stage-vacuum-pump-3-5-cfm-37-5-micron-deep-vacuum-kit-with-oil-gloves","title":"Orion Motor Tech 3.5 CFM Single-Stage Vacuum Pump — 3.5 CFM, 37.5 Micron Deep Vacuum, Kit with Oil \u0026 Gloves","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's OMT 3.5 CFM single-stage vacuum pump is a compact, service-ready unit designed to evacuate automotive and light commercial AC systems to deep vacuum levels for maintenance and repair.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis single-stage vacuum pump from Orion Motor Tech combines a 1\/4 hp all-copper motor with a 3.5 CFM displacement to pull systems down to roughly 37.5 microns (5 Pa). Built for routine HVAC and automotive air conditioning work, the pump ships as a complete kit with lubricant, protective gloves, and Teflon tape so you can start evacuating systems right away. Its reinforced aluminum alloy body dissipates heat and resists corrosion, while user-friendly touches such as a sight glass on the oil reservoir and a nonslip handle simplify onsite use and transport.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast and deep can this pump evacuate an AC system?\u003c\/h3\u003e\n\n\u003cp\u003eThe OMT 3.5 CFM pump delivers a steady 3.5 cubic feet per minute flow and can reach around 37.5 microns (approximately 5 Pa), suitable for removing non-condensable gases and moisture from most automotive and light commercial refrigeration loops. Speed of evacuation will depend on system volume, hose length, and connection quality.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e3.5 CFM nominal flow rate for efficient pulls\u003c\/li\u003e\n  \u003cli\u003eUltimate vacuum approximately 37.5 microns (5 Pa)\u003c\/li\u003e\n  \u003cli\u003eCompatible with R12, R22, R134a, R410a, and R502 systems\u003c\/li\u003e\n  \u003cli\u003eEvacuation time varies by system size and hose routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this pump durable and safe to use?\u003c\/h3\u003e\n\n\u003cp\u003eDurability comes from the reinforced aluminum alloy housing which helps dissipate heat and resist corrosion during repeated service cycles. An intake filter and internal trap reduce contamination from particulates and oil mist, protecting the pump internals and improving longevity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy casing for heat dispersion and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eIntake filter and trap to limit contaminants and oil carryover\u003c\/li\u003e\n  \u003cli\u003eAll-copper 1\/4 hp motor for consistent performance\u003c\/li\u003e\n  \u003cli\u003eSight glass to monitor oil condition and level\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich accessories and connections are included in the kit?\u003c\/h3\u003e\n\n\u003cp\u003eThe pump kit arrives with the basic consumables and accessories needed for many service jobs: lubricating\/absorptive oil, a pair of protective gloves to keep hands clean during oil top-ups, and Teflon tape to seal threaded fittings. Hose compatibility supports common service hoses and adapters for automotive and light commercial tasks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLubricating\/absorptive oil for immediate use and maintenance\u003c\/li\u003e\n  \u003cli\u003eProtective gloves for clean oil handling\u003c\/li\u003e\n  \u003cli\u003eTeflon tape for leak-free thread connections\u003c\/li\u003e\n  \u003cli\u003eWorks with 1\/4\", 3\/8\", and 1\/2\" hoses and fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and user-friendly is it for field work?\u003c\/h3\u003e\n\n\u003cp\u003eThe unit was designed for technicians who move between jobs: a nonslip handle and compact footprint make it easy to carry and store in a service van. Simple oil-level sight glass, a clearly labeled power switch, and standard hose compatibility reduce setup time at the vehicle or job site.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNonslip handle for secure carrying between jobs\u003c\/li\u003e\n  \u003cli\u003eSight glass and oil scale for quick checks and refills\u003c\/li\u003e\n  \u003cli\u003eCompact, service-van friendly size and weight\u003c\/li\u003e\n  \u003cli\u003eStandard electrical and hose fittings minimize adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT 3.5 CFM single-stage vacuum pump is aimed at automotive technicians, HVAC apprentices, and DIYers who perform routine AC evacuations and repairs on cars or small commercial refrigeration units. It’s a practical option for anyone wanting a ready-to-use kit with corrosion-resistant construction, reasonable evacuation performance, and straightforward maintenance features without investing in a large industrial vacuum system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pump compatible with R134a automotive systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The OMT 3.5 CFM single-stage pump is suitable for evacuating R134a automotive AC systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include oil and fittings to start work immediately?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit supplies lubricating\/absorptive oil, protective gloves, and Teflon tape for initial setup and maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584934379705,"sku":"B0CSGDHQML","price":192.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-omt-front-view.jpg?v=1790459699"},{"product_id":"orion-motor-tech-adjustable-trailer-hitch-2-5-inch-receiver-dual-ball-18-500-lb-capacity-9-position-drop-rise","title":"Orion Motor Tech Adjustable Trailer Hitch 2.5 Inch Receiver — Dual‑Ball 18,500 lb Capacity, 9‑Position Drop\/Rise","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's OMT Adjustable Trailer Hitch is a heavy-duty 2.5\" receiver drop hitch with an integrated dual ball (2-5\/16\" and 2\") rated up to 18,500 lb for versatile, secure towing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adjustable drop hitch from Orion Motor Tech combines high-capacity towing, corrosion-resistant construction, and a simple height-adjustment system so you can match trailer height quickly and tow with confidence. Designed for Class V receivers, the hitch includes two ball sizes for common coupler types and a wide range of height positions to accommodate trucks, campers, and heavy equipment. Built for durability and everyday use, it focuses on a stable, theft-resistant connection and easy installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hitch handle different trailer heights?\u003c\/h3\u003e\n\u003cp\u003eThe hitch offers nine distinct height settings with an 8\" total drop\/rise range, letting you square up trailer and vehicle frames without additional shims. Its smooth sliding mechanism makes changing positions fast and repeatable, minimizing sway and tongue weight issues that occur with misaligned setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNine indexed height positions for repeatable alignment\u003c\/li\u003e\n  \u003cli\u003e8\" combined drop\/rise to fit a wide variety of trailers\u003c\/li\u003e\n  \u003cli\u003eSlide-and-lock mechanism for quick adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat towing capacities and ball sizes are included?\u003c\/h3\u003e\n\u003cp\u003eThis Orion Motor Tech hitch integrates two trailer balls: a 2-5\/16\" ball rated at 18,500 lb and a 2\" ball rated at 8,000 lb, covering most heavy-duty and light-to-medium towing needs. The dual-ball design eliminates the need to swap balls between loads, simplifying transitions between trailers with different coupler sizes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-5\/16\" ball — 18,500 lb capacity for heavy trailers\u003c\/li\u003e\n  \u003cli\u003e2\" ball — 8,000 lb capacity for lighter trailers\u003c\/li\u003e\n  \u003cli\u003eDual-ball layout reduces downtime switching components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the hitch secure and built to last?\u003c\/h3\u003e\n\u003cp\u003eOrion Motor Tech constructed the hitch from solid steel and aerospace-grade aluminum, then applied a corrosion-resistant finish so it withstands road salt, rain, and long-term outdoor storage. Included locking pins help deter theft and prevent accidental uncoupling, while the integrated ball mount design reduces movement for a steadier tow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid steel and aerospace-grade aluminum construction\u003c\/li\u003e\n  \u003cli\u003eWeather-resistant coating for long-term durability\u003c\/li\u003e\n  \u003cli\u003eIncluded locking pins to secure the hitch and reduce theft risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and use on the road?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: mount the unit into a 2.5\" receiver and secure with the supplied pins; orientation can be up or down for extra versatility. Adjustments are tool-free and done via the sliding mechanism so you can fine-tune height at the hitch rather than make repeated trips back to the truck bed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits standard 2.5\" receivers (Class V)\u003c\/li\u003e\n  \u003cli\u003eMounts up or down for flexible setup\u003c\/li\u003e\n  \u003cli\u003eTool-free height changes using the slider and locking pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Orion Motor Tech adjustable drop hitch is aimed at truck owners, fleet operators, and weekend haulers who need a rugged, adaptable hitch for large campers, car haulers, equipment trailers, or toy haulers. If you tow varied loads with different coupler sizes and need a dependable, easy-to-adjust solution that resists corrosion and minimizes play, this hitch delivers the capacity and convenience expected from heavy-duty towing gear.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What receiver size does this hitch require?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hitch fits a 2.5\" receiver (Class V) and mounts either up or down for flexible use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I switch between ball sizes without tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the dual-ball design includes both sizes so you don’t need to swap balls for different trailers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584940146873,"sku":"B0DBZ192BR","price":355.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-profile.jpg?v=1790460001"},{"product_id":"orion-motor-tech-motorcycle-lift-scissor-jack-1-100-lb-9-1x14-6-platform-3-7-14-6-height","title":"Orion Motor Tech Motorcycle Lift Scissor Jack 1,100 lb – 9.1x14.6\" Platform, 3.7–14.6\" Height","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech OMT Motorcycle Lift is a heavy-duty scissor jack that safely raises motorcycles, ATVs and dirt bikes up to 1,100 lb, with a wide deck and five locking positions for stable maintenance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you work on motorcycles, ATVs or cruisers at home or in a small shop, a dependable lift makes routine maintenance faster and safer. The Orion Motor Tech OMT scissor jack stand offers a manual, compact solution that raises machines from 3.7\" to 14.6\" while delivering a broad 9.1\" x 14.6\" platform and built-in safety locks. Built from welded steel with a rubber tabletop, it’s designed to keep bikes steady during oil changes, chain adjustments and wheel servicing.\u003c\/p\u003e\n\n\u003ch3\u003eHow much weight can this lift handle and which bikes fit?\u003c\/h3\u003e\n\u003cp\u003eThis lift is rated for up to 1,100 pounds, suitable for most dirt bikes, cruisers, ATVs and small to medium motorcycles. That capacity covers many single- and twin-cylinder models as well as heavier cruisers when centered correctly on the deck. Always verify your vehicle’s weight and balance the load on the platform before lifting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum rated capacity: 1,100 lb (500 kg)\u003c\/li\u003e\n  \u003cli\u003ePlatform size: 9.1\" x 14.6\" for broad contact area\u003c\/li\u003e\n  \u003cli\u003eLift range: 3.7\" (lowered) to 14.6\" (fully raised)\u003c\/li\u003e\n  \u003cli\u003eBest for dirt bikes, light ATVs, cruisers and smaller touring bikes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you operate the scissor jack and lock it safely?\u003c\/h3\u003e\n\u003cp\u003eThe lift raises by turning the T-handle or using a 3\/8\" socket with a ratchet; this manual operation gives controlled, predictable movement and reduces undue stress on the screw. Once you reach the desired height, slide the included safety bar into one of the five locking holes to mechanically secure the platform and prevent accidental lowering. Manual lifting is recommended to prolong the screw’s life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperate with T-handle or 3\/8\" socket and ratchet\u003c\/li\u003e\n  \u003cli\u003eFive locking positions for incremental height security\u003c\/li\u003e\n  \u003cli\u003eInsert safety bar to create a mechanical lock\u003c\/li\u003e\n  \u003cli\u003eRecommend manual operation to extend screw life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and features provide durability and stability?\u003c\/h3\u003e\n\u003cp\u003eThe lift is constructed from heavy-duty steel with plug-welded seams and a double crossbar frame for reinforced strength and cleaner joints. A rubber tabletop keeps the bike from slipping while the broad deck distributes weight to reduce point pressure. The finish resists corrosion and the welded junctions are designed for frequent garage or shop use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty welded steel frame with plug welding\u003c\/li\u003e\n  \u003cli\u003eDouble crossbar design for added rigidity\u003c\/li\u003e\n  \u003cli\u003eRubber tabletop to secure the vehicle and prevent marring\u003c\/li\u003e\n  \u003cli\u003eDurable finish that resists corrosion and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this lift fit into everyday maintenance tasks?\u003c\/h3\u003e\n\u003cp\u003eWith a compact footprint and a wide operating height range, the OMT scissor jack accelerates routine tasks like tire changes, chain adjustments, brake inspections and oil work. The stable deck and safety lock let you work with both hands free and greater confidence than jacking stands alone. It’s a practical tool for hobbyists and serious DIY mechanics aiming for safer, neater jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpeeds up wheel and brake servicing\u003c\/li\u003e\n  \u003cli\u003eMakes chain and sprocket work more accessible\u003c\/li\u003e\n  \u003cli\u003eProvides a stable platform for oil changes and inspections\u003c\/li\u003e\n  \u003cli\u003eCompact for storage but robust for regular shop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT 1100lb Motorcycle Lift is aimed at home mechanics, weekend riders and small shop owners who need a durable, space-saving lift capable of handling a wide range of motorcycles and light ATVs. If you want a manually operated, welded-steel scissor jack with multiple safety locks and a non-slip tabletop, this model delivers reliable support for common maintenance and repair tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum lift height of this scissor jack?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The OMT lift raises from 3.7 inches up to 14.6 inches for a useful maintenance range.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the lift include a safety lock?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it has five locking holes and a safety bar that creates a mechanical lock after raising.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584955023545,"sku":"B0B3X85X4Q","price":246.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view_6dd43054-380d-4ec3-811c-f46943763cb4.jpg?v=1790460855"},{"product_id":"orion-motor-tech-1100-lb-motorcycle-scissor-lift-jack-wide-9-1x14-6-deck-manual-t-handle-5-lock-positions","title":"Orion Motor Tech 1100 lb Motorcycle Scissor Lift Jack — Wide 9.1x14.6\" Deck, Manual T-Handle, 5 Lock Positions","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech OMT 1100lb Motorcycle Scissor Lift Jack is a heavy-duty wide-deck hoist that raises bikes up to 1100 lb for safe, level maintenance and storage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe OMT 1100lb scissor lift jack is built to make workshop and garage motorcycle maintenance easier and more secure. With a broad 9.1\" x 14.6\" platform, a manual T-handle and socket operation, and five locking positions, this lift gives a dependable, non-powered way to access your bike’s underside, wheels, and chassis. Rugged steel construction, plug-welded joints and a rubberized tabletop combine strength with protection for painted surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow high will this lift raise my motorcycle?\u003c\/h3\u003e\n\n\u003cp\u003eThe lift offers a usable range from 3.7 inches at its lowest to 14.6 inches at its highest, suitable for most routine repairs and wheel work. Lift height is adjusted by turning the included T-handle or using a 3\/8\" socket with a ratchet.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLow profile start height: 3.7\" for easy loading.\u003c\/li\u003e\n  \u003cli\u003eMaximum height: 14.6\" for comfortable under-bike access.\u003c\/li\u003e\n  \u003cli\u003eManual screw drive for precise, controlled lifting.\u003c\/li\u003e\n  \u003cli\u003eOperate with T-handle or 3\/8\" socket and ratchet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the platform keep my motorcycle stable while I work?\u003c\/h3\u003e\n\n\u003cp\u003eYes—stability is a core feature. The extra-wide 9.1\" x 14.6\" deck gives a broader footprint than narrow stands, while the rubber tabletop reduces slipping and protects finishes. After raising the bike, insert the steel safety bar into one of five locking holes to mechanically secure the lift and guard against accidental descent.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e9.1\" x 14.6\" wide deck for improved balance.\u003c\/li\u003e\n  \u003cli\u003eRubberized top to prevent scratches and skidding.\u003c\/li\u003e\n  \u003cli\u003eFive lock positions with a steel safety bar for secure holding.\u003c\/li\u003e\n  \u003cli\u003eSolid base design minimizes tipping during routine tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the construction for regular garage use?\u003c\/h3\u003e\n\n\u003cp\u003eThe lift is fabricated from heavy-duty steel with a plug-weld and double crossbar layout to strengthen joints and reduce flex. The robust build and corrosion-resistant finish are intended to stand up to repeated use in home or professional settings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeavy-gauge steel frame for high load capacity and longevity.\u003c\/li\u003e\n  \u003cli\u003ePlug-welded seams and double crossbar reinforcements for rigidity.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant coating helps resist workshop moisture.\u003c\/li\u003e\n  \u003cli\u003eRated capacity: 1100 lb (500 kg) for a wide range of motorcycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the recommended way to operate and maintain this hoist?\u003c\/h3\u003e\n\n\u003cp\u003eManual operation is recommended to prolong the screw mechanism’s life and reduce wear. Use the T-handle for routine lifts and a 3\/8\" socket and ratchet when additional leverage is needed; always engage the safety bar before working under the motorcycle and perform routine inspections for fastener tightness and lubrication.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrefer manual T-handle operation to extend screw life.\u003c\/li\u003e\n  \u003cli\u003eUse a 3\/8\" socket and ratchet for heavier or faster lifts.\u003c\/li\u003e\n  \u003cli\u003eInsert safety bar in a locking hole before repairs.\u003c\/li\u003e\n  \u003cli\u003eInspect welds, bolts and screw threads periodically; lubricate as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this lift is for: The Orion Motor Tech OMT 1100lb scissor lift is aimed at motorcycle owners, DIY mechanics, and small shops that need a reliable, non-powered hoist with a broad platform. It suits cruisers, sportbikes, dual-sport machines and many dirt bikes within the 1100 lb limit, and is particularly useful where a stable, protective tabletop and mechanical locking are priorities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum weight capacity?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The OMT scissor lift supports motorcycles up to 1100 lb (500 kg).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use power tools to raise it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 3\/8\" socket and ratchet if needed, but manual operation is recommended to extend screw life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584955056313,"sku":"B01M0AB7MJ","price":225.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-omt-front-view-wide-deck.jpg?v=1790460855"},{"product_id":"orion-motor-tech-6x5-5-wheel-spacers-108mm-bore-set-of-4-4-track-increase-t6-aluminum","title":"Orion Motor Tech 6x5.5 Wheel Spacers 108mm Bore — Set of 4, 4\" Track Increase, T6 Aluminum","description":"\u003cstrong\u003eThese Orion Motor Tech 6x5.5 (6x139.7) wheel spacers with a 108mm center hub bore are a precision-machined set of four spacers designed to safely widen your track for improved stability and a more aggressive stance.\u003c\/strong\u003e\n\n\u003cp\u003eIf you want to push your truck’s wheels slightly outward for better cornering response, improved visual presence, or to clear larger brakes and tires, this Orion Motor Tech spacer kit gives you a durable, service-ready option. Machined from T6 aircraft-grade aluminum and supplied with Dacromet-coated M14x1.5 bolts, the kit balances lightweight performance with corrosion resistance. It’s built specifically to fit many Chevrolet and GMC full-size pickup and SUV models, offering a measured 4-inch axle track increase when installed in pairs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does adding these spacers affect handling and stability?\u003c\/h3\u003e\n\u003cp\u003eWidening the wheel track increases the lateral distance between tires, which generally improves cornering stability and reduces body roll at moderate speeds. These spacers reposition each wheel outboard by a fixed amount, changing leverage and suspension geometry slightly—usually felt as more planted steering feel when using correct installation practices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4-inch axle track increase per axle when using paired spacers\u003c\/li\u003e\n  \u003cli\u003eSolid T6 aluminum reduces unsprung weight compared with steel alternatives\u003c\/li\u003e\n  \u003cli\u003eDesigned to preserve hub-centric contact with a 108mm bore\u003c\/li\u003e\n  \u003cli\u003eDacromet-coated bolts resist corrosion, maintaining clamping force\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these spacers compatible with my truck or SUV?\u003c\/h3\u003e\n\u003cp\u003eThis set fits a wide range of Chevrolet and GMC full-size models with a 6x5.5 (6x139.7) bolt pattern and a 108mm center bore. Confirm your vehicle’s bolt pattern and center bore before ordering; compatibility depends on both wheel and hub specifications as well as model year variations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Chevrolet K1500 (1994–1998) and Silverado 1500 (1999–2022)\u003c\/li\u003e\n  \u003cli\u003eCompatible with Silverado 1500 HD (2001–2006) and Suburban 1500 (2000–2017)\u003c\/li\u003e\n  \u003cli\u003eWorks on Chevrolet Tahoe (1995–2022) and GMC Sierra\/Yukon models listed\u003c\/li\u003e\n  \u003cli\u003eConfirm hub centric 108mm bore and 6x139.7 lug pattern prior to installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and design features improve longevity and safety?\u003c\/h3\u003e\n\u003cp\u003eEach spacer is cut from solid T6 aircraft-grade aluminum for a strong yet lightweight component that resists bending and fatigue. Unique rear-face slots aid removal and reduce stress concentrations while the included Dacromet-coated M14x1.5 bolts offer superior corrosion protection compared with standard zinc coatings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 aircraft-grade aluminum construction—high strength-to-weight ratio\u003c\/li\u003e\n  \u003cli\u003eRear slots enable easier removal and balanced load distribution\u003c\/li\u003e\n  \u003cli\u003e24 Dacromet-coated bolts rated for enhanced corrosion resistance\u003c\/li\u003e\n  \u003cli\u003ePrecision machining for secure hub-centric fit and repeatable installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eThese spacers are precision-machined for a snug fit and include clear instructions for a typical do-it-yourself installation using common shop tools. You’ll need to torque the supplied bolts to the manufacturer’s recommended specs and verify wheel clearance and alignment after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntuitive design with clear installation guidance included\u003c\/li\u003e\n  \u003cli\u003eRequires standard sockets and torque wrench for proper fitment\u003c\/li\u003e\n  \u003cli\u003eRecheck lug torque after first 50–100 miles for safety\u003c\/li\u003e\n  \u003cli\u003eMay require minor alignment check depending on ride height and tire size\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own compatible Chevrolet or GMC trucks and SUVs and want a reliable, engineered spacer to widen their track for improved stability, visual stance, or fitment clearance. It’s well-suited for enthusiasts upgrading wheels and tires, fleet owners seeking consistent parts, and anyone who prefers lightweight aluminum components with enhanced corrosion protection for long-term use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these spacers fit my Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Silverado 1500 uses a 6x5.5 (6x139.7) bolt pattern and a 108mm hub bore, these spacers will fit. Verify your wheel and hub specs before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra hardware to install the spacers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No extra hardware is required; the kit includes 24 Dacromet-coated M14x1.5 bolts and installation instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584959054009,"sku":"B0924DY6TG","price":273.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view-spacers.jpg?v=1790461047"},{"product_id":"orion-motor-tech-master-brake-caliper-tool-kit-34pc-11-adapters-line-cutter-steel-molded-case","title":"Orion Motor Tech Master Brake Caliper Tool Kit 34pc — 11 Adapters \u0026 Line Cutter, Steel Molded Case","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech OMT 34-piece Master Brake Caliper Tool Kit is a complete, professional-grade set that provides the adapters, piston compressors, and line cutter needed to service most passenger vehicle brake calipers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're a DIY enthusiast or a shop technician, this organized kit brings the key tools for caliper piston resetting, brake line cutting and bending, plus assembly and disassembly tasks into one durable case. Built from 1045 and 50BV30 alloy steels with nickel and chrome plating, the components resist corrosion and stand up to repeated use. The molded, labeled case keeps everything tidy so you can find the right adapter fast and finish jobs more efficiently.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does this kit include and which vehicles does it cover?\u003c\/h3\u003e\n\u003cp\u003eThe 34-piece set bundles multiple caliper piston tools, 11 adapter plates, a brake line cutter and bending tools, plus assorted hardware to tackle a broad range of caliper styles. It’s intended for most common car and light-truck brake systems—particularly those requiring rotary-style piston compression or adapter-based plate compression.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e34 total pieces: compressor tools, adapter plates, brake line cutter, bending fixtures, and hardware.\u003c\/li\u003e\n  \u003cli\u003e11 distinct adapters to match many piston face patterns and diameters.\u003c\/li\u003e\n  \u003cli\u003eFits many passenger cars and light trucks—check adapter matches for specific applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit make brake caliper work faster and neater?\u003c\/h3\u003e\n\u003cp\u003eDesigned to reduce trial-and-error, the labeled molded case organizes each component for quick access and secure storage. Clear instructions guide setup and operation so you spend less time searching or improvising and more time completing the job correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMolded slots keep adapters and tools visible and protected.\u003c\/li\u003e\n  \u003cli\u003eStep-by-step instructions to shorten setup and avoid mistakes.\u003c\/li\u003e\n  \u003cli\u003eCompact case simplifies transport between shop and vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these tools durable enough for repeated shop use?\u003c\/h3\u003e\n\u003cp\u003eYes. Key pieces are manufactured from 1045 steel and 50BV30 alloy steel and receive corrosion-resistant nickel and chrome plating. Those material choices deliver strength and longevity for routine brake servicing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength alloy steels for load-bearing components.\u003c\/li\u003e\n  \u003cli\u003eNickel\/chrome plating to resist rust and surface wear.\u003c\/li\u003e\n  \u003cli\u003eRugged hardware and solid machining for repeatable, reliable performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to cut or bend brake lines with this kit?\u003c\/h3\u003e\n\u003cp\u003eThe included brake line cutter and bending tools are sized for common brake tubing and offer clean cuts and controlled bends without flattening the line. Using purpose-built cutters and formers preserves line integrity and speeds replacement or custom routing tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLine cutter gives smooth, burr-free cuts on standard brake tubing.\u003c\/li\u003e\n  \u003cli\u003eBending fixtures form accurate bends without kinking.\u003c\/li\u003e\n  \u003cli\u003eComplete set eliminates the need for improvised tools that can damage lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Mechanics, mobile technicians, and committed DIYers who perform brake maintenance will find this Orion Motor Tech kit a practical, long-lasting addition to their toolbox. It’s especially useful for anyone who wants a one-case solution for caliper piston retraction, adapter matching, and brake line work—reducing trips to specialty shops and minimizing the chance of using improper tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include instructions for beginners?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the set includes step-by-step instructions to guide both beginners and pros through common brake tasks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the adapters fit my vehicle's calipers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit contains 11 adapters that fit many passenger cars and light trucks; verify adapter shape against your caliper piston pattern.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584962691257,"sku":"B0DLV2PJ8F","price":192.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-master-kit-front.jpg?v=1790461192"},{"product_id":"orion-motor-tech-ball-joint-wheel-bearing-press-kit-34pc-c-frame-heat-treated-alloy","title":"Orion Motor Tech Ball Joint \u0026 Wheel Bearing Press Kit 34pc — C‑Frame, Heat‑Treated Alloy","description":"\u003cstrong\u003eOrion Motor Tech OMT 34pc Ball Joint \u0026amp; Wheel Bearing Press Kit is a combined press system that removes and installs wheel bearings and press-fit suspension parts without hammering or vehicle disassembly.\u003c\/strong\u003e\n\n\u003cp\u003eThis all-in-one set merges a 24-piece wheel bearing puller assembly and a 10-piece ball-joint press into two organized blow-molded cases so you can tackle bearing replacement, ball joint service, U-joint jobs, and similar press-fit repairs at home or in a professional shop. Built from heat-treated steel with protective coating, the kit is engineered for repeated leverage and corrosion resistance, and it includes adapter plates, cups, tubes, and forcing bolts to fit a wide range of domestic cars and light trucks.\u003c\/p\u003e\n\n\u003ch3\u003eWhat components are included and how do they work together?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains a 24-piece wheel bearing puller group and a 10-piece C-frame ball joint press set. Each sub-kit delivers the parts needed to press bearings out and in, plus to separate and install ball joints and related components without using impact tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWheel bearing set: main nut, two sliding screws, multiple sleeves, sleeve plates, washers, and 13 adapter plates for various hub sizes.\u003c\/li\u003e\n  \u003cli\u003eBall joint set: C-frame press, forcing bolt, center rod, installation cup, receiving cup, three adapters, and three receiving tubes for press-fit control.\u003c\/li\u003e\n  \u003cli\u003eTwo blow-molded storage cases keep adapters and hardware sorted and transportable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and repair tasks is this kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe OMT 34pc kit targets most front-wheel-drive cars and many light trucks for wheel bearing work and supports typical 1\/2 and 3\/4 ton 2WD and 4WD vehicles for ball joint service. Compatibility extends to well-known domestic makes and common hub sizes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWheel bearings: fits many FWD cars and light trucks across popular domestic brands.\u003c\/li\u003e\n  \u003cli\u003eBall joints: accommodates common sizes used in GM, Ford, Jeep, Dodge, Chevrolet, and similar trucks and SUVs.\u003c\/li\u003e\n  \u003cli\u003eAlso useful for U-joints, brake anchor pin removal\/installation, and other press-fit components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the toolset for repeated professional use?\u003c\/h3\u003e\n\u003cp\u003eKey pressure-bearing parts are manufactured from premium alloy steels and then blackened or coated to resist rust and wear under heavy torque. That construction gives consistent clamping and pressing strength while minimizing deformation and corrosion over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated 1045 steel and steel 20 components for high-strength load handling.\u003c\/li\u003e\n  \u003cli\u003eProtective blackened\/coated finish for corrosion resistance and easier cleaning.\u003c\/li\u003e\n  \u003cli\u003eDesigned to minimize hammering, reducing risk of damage to hubs and suspension parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the case and how portable is it?\u003c\/h3\u003e\n\u003cp\u003eThe set ships in two molded cases sized for tool organization and transport between the home garage and professional bays. Each case is molded to keep the forcing bolts, cups, plates, and adapters secure and quick to inventory before a job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo dedicated blow-molded cases for bearing and ball-joint sub-kits.\u003c\/li\u003e\n  \u003cli\u003eCompact layout saves bench space and makes the kit workshop-ready.\u003c\/li\u003e\n  \u003cli\u003eAll pieces stored flat and accessible to speed up setup and teardown.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Orion Motor Tech OMT 34pc Ball Joint \u0026amp; Wheel Bearing Press Kit is ideal for DIY mechanics who want a reliable press solution, independent technicians needing a portable, durable kit for common vehicle brands, and small-shop mechanics who require broad compatibility without investing in multiple specialty tools. It’s particularly suited to owners of domestic cars, light trucks, and mid-sized SUVs who perform routine suspension and bearing maintenance and prefer a non-destructive press method over hammering or cutting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit work on my Ford truck ball joints?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the ball joint set fits most 1\/2 and 3\/4 ton 2WD and 4WD trucks, including many Ford models; check adapter sizes against your joint diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I remove wheel bearings without damaging hubs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the press and adapter plates let you press bearings in and out with controlled force to avoid hub and seal damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584971571385,"sku":"B0D8152NY2","price":405.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-omt-34pc-front-overview.jpg?v=1790461503"},{"product_id":"orion-motor-tech-5x4-5-wheel-spacers-2-hub-centric-set-of-4-64-1mm-bore-t6-aluminum-dacromet-bolts","title":"Orion Motor Tech 5x4.5 Wheel Spacers 2\" Hub-Centric Set of 4 — 64.1mm Bore, T6 Aluminum \u0026 Dacromet Bolts","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech OMT 5x4.5 wheel spacers are a 2-inch hub-centric spacer kit with a 64.1mm center bore that safely increases track width for improved stance and stability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want to widen your vehicle’s track without changing wheels or axles, these OMT spacers offer a bolt-on solution engineered for fit and durability. Machined from T6 aircraft-grade aluminum and paired with Dacromet-coated M12x1.5 bolts, the kit is designed to be lightweight yet corrosion resistant. The hub-centric design keeps the wheel centered on the hub for better balance compared with stud-based alternatives, and the rear-face slots simplify removal and reduce risk of damage.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these spacers affect handling and appearance?\u003c\/h3\u003e\n\u003cp\u003eAdding 2 inches of track width per axle changes wheel placement outward from the hub, which can enhance cornering stability and give a wider, more aggressive stance. While they won’t alter suspension geometry dramatically, the increased track can improve lateral grip and visual presence.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-inch spacer thickness pushes wheels outward for a wider stance\u003c\/li\u003e\n  \u003cli\u003eHub-centric fit minimizes vibration and keeps wheels centered\u003c\/li\u003e\n  \u003cli\u003eCan improve cornering stability without modifying suspension\u003c\/li\u003e\n  \u003cli\u003eEnhances visual fitment and tire clearance for custom wheel setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these spacers durable and corrosion resistant?\u003c\/h3\u003e\n\u003cp\u003eThe spacers are CNC-machined from T6 aircraft-grade aluminum, chosen for strength-to-weight performance. Fasteners are Dacromet-coated M12x1.5 bolts, offering several times the corrosion resistance of plain steel hardware so the kit lasts in wet or salty conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 aircraft-grade aluminum construction for strength and low weight\u003c\/li\u003e\n  \u003cli\u003eDacromet-coated bolts resist rust far better than standard bolts\u003c\/li\u003e\n  \u003cli\u003ePrecision machining ensures consistent thickness and concentricity\u003c\/li\u003e\n  \u003cli\u003eRear-face slots help avoid damage during removal and extend service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles do these spacers fit and where are they installed?\u003c\/h3\u003e\n\u003cp\u003eThis OMT 5x4.5 kit has a 64.1mm center bore and is intended for the rear axle of several Honda and Acura models, and for front\/rear in compatible fitments listed. Always verify hub bore and bolt pattern match your vehicle before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many Acura models (CL, Integra Type R, MDX, RL, RSX, TL, TSX) and several Honda models (Accord, CR-V, Civic, Element, Odyssey, Pilot, Prelude)\u003c\/li\u003e\n  \u003cli\u003eRear axle only for Acura NSX and Honda S2000 as specified\u003c\/li\u003e\n  \u003cli\u003eFits vehicles with 5x4.5 (5x114.3mm) bolt pattern and 64.1mm hub bore\u003c\/li\u003e\n  \u003cli\u003eCheck wheel backspacing and brake clearance before final installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable removing wheels and torquing lug hardware. The kit includes four 2-inch aluminum spacers and the correct Dacromet-coated M12x1.5 bolts; follow vehicle-specific torque specs and threadlocker recommendations as needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-machined, hub-centric spacers for simple alignment during fitment\u003c\/li\u003e\n  \u003cli\u003eIncludes 20 Dacromet-coated M12x1.5 bolts—enough for multiple wheels or replacements\u003c\/li\u003e\n  \u003cli\u003eSlots on the spacer rear face make removal easier and protect wheel studs\u003c\/li\u003e\n  \u003cli\u003eInstallation requires wheel removal, proper torque wrench, and adherence to safety specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Orion Motor Tech spacer set is aimed at enthusiasts and DIYers who want a reliable, bolt-on way to broaden track width for better stance and handling on compatible Honda and Acura models. It suits anyone seeking a lightweight, corrosion-resistant spacer with a hub-centric design—mechanically minded owners, weekend modifiers, and shops performing bolt-on wheel fitment upgrades.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these spacers fit my 2006 Honda Civic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Civic uses a 5x4.5 (5x114.3mm) bolt pattern and a 64.1mm hub bore, these will fit. Verify hub bore and brake clearance before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these spacers on the front axle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Some models accept them front and rear; check the vehicle-specific fit list and clearance. For NSX and S2000, these are rear-axle only.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584982778041,"sku":"B0924BPXQG","price":190.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-packaging-spacers.jpg?v=1790462091"},{"product_id":"orion-motor-tech-atv-wheel-spacers-4x156-set-of-4-131mm-hub-bore-4-track-widening-t6-aluminum","title":"Orion Motor Tech ATV Wheel Spacers 4x156 — Set of 4, 131mm Hub Bore, 4\" Track Widening, T6 Aluminum","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech OMT 4x156 ATV wheel spacers are a set of four precision-machined T6 aluminum adapters that widen your ATV's track by 4 inches and use a 131mm center hub bore for enhanced stability and fitment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese OMT spacers are engineered to move your wheels outward for improved cornering stability and a more aggressive stance while maintaining a lightweight profile. Machined from aircraft-grade T6 aluminum and supplied with Dacromat-coated M12x1.5 hardware, the kit balances corrosion resistance with strength for off-road conditions. Designed to fit many Polaris Ranger and RZR models, the spacers aim to be a straightforward bolt-on upgrade for riders seeking better handling and a custom look.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these spacers affect handling and stability?\u003c\/h3\u003e\n\u003cp\u003eWidening the axle track by 4 inches increases lateral stability and reduces the likelihood of roll during aggressive cornering. The broader footprint improves weight distribution across turns, giving the vehicle a more planted feel without altering suspension geometry significantly. Use caution with tire clearance and steering stops when changing track width.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreases track width by 4 inches for more lateral stability\u003c\/li\u003e\n  \u003cli\u003eDistributes cornering forces across a wider base\u003c\/li\u003e\n  \u003cli\u003eHelps reduce body roll under lateral loads\u003c\/li\u003e\n  \u003cli\u003eMaintains lightweight performance thanks to T6 aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these spacers fit my Polaris Ranger or RZR model?\u003c\/h3\u003e\n\u003cp\u003eThis particular OMT spacer set uses a 4x156 bolt pattern with a 131mm center hub bore, designed to fit many Polaris Ranger and RZR platforms. Confirm your wheel bolt pattern and hub bore prior to purchase to ensure compatibility. If your vehicle is listed among supported models, installation should be straightforward with the included hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 4x156 (4x6.14\")\u003c\/li\u003e\n  \u003cli\u003eCenter hub bore: 131mm for hub-centric mounting\u003c\/li\u003e\n  \u003cli\u003eCompatible with Polaris Ranger (since 2013) and multiple RZR models since 2014–2015\u003c\/li\u003e\n  \u003cli\u003eCheck wheel backspacing and fender clearance before fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are included, and how durable are they?\u003c\/h3\u003e\n\u003cp\u003eThe spacers are CNC-machined from T6 aircraft-grade aluminum for a high strength-to-weight ratio. The kit includes 16 Dacromat-coated M12x1.5 bolts that offer advanced corrosion resistance compared with plain steel fasteners. A rear-face slot design eases removal and reduces stress during service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 aircraft-grade aluminum bodies — lightweight and robust\u003c\/li\u003e\n  \u003cli\u003eDacromat-coated M12x1.5 bolts — improved rust and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eRear slots for easier removal and reduced damage risk\u003c\/li\u003e\n  \u003cli\u003ePrecision machining for a hub-centric fit and safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be user-friendly and typically requires common hand tools. The spacers are precision-machined for an intuitive fit and come with instructions and all necessary bolts. Allow time to verify torque specs, check wheel clearance, and perform a post-installation torque recheck after a short ride.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires basic tools: torque wrench, sockets, jack\/stands\u003c\/li\u003e\n  \u003cli\u003eIncludes all M12x1.5 bolts needed for mounting\u003c\/li\u003e\n  \u003cli\u003eFollow torque specifications and retorque after initial use\u003c\/li\u003e\n  \u003cli\u003eInspect for wheel\/tire and steering clearance once mounted\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who want a straightforward, durable way to broaden their ATV's stance and sharpen cornering performance without a major suspension overhaul. This kit is best for owners of compatible Polaris Ranger and RZR models who understand wheel fitment basics and are comfortable performing or supervising a bolt-on install. If you need exact fitment confirmation, measure your wheel bolt pattern and hub bore or consult a professional installer before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What bolt pattern and hub bore do these spacers use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They use a 4x156 bolt pattern with a 131mm center hub bore; confirm your wheels match before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included bolts corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes Dacromat-coated M12x1.5 bolts rated for improved corrosion resistance over plain steel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584982843577,"sku":"B083NT9DR2","price":290.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-spacers-front-view.jpg?v=1790462091"},{"product_id":"orion-motor-tech-5x100-wheel-spacers-56-1mm-center-bore-set-of-4-2-track-increase-t6-aluminum","title":"Orion Motor Tech 5x100 Wheel Spacers 56.1mm Center Bore — Set of 4, 2\" Track Increase, T6 Aluminum","description":"\u003cp\u003e\u003cstrong\u003eThese Orion Motor Tech hub-centric wheel spacers convert your vehicle's bolt pattern to 5x100 and widen the axle track by 2 inches using a 56.1mm center bore—sold as a set of four.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you want improved stance, wider wheel clearance, or a more planted feel, this spacer kit brings precision-engineered components to the installation. Machined from T6 aerospace-grade aluminum and paired with Dacromet-coated M12x1.25 hardware, the set prioritizes lightweight strength and corrosion resistance. The hub-centric construction aligns the wheel flange and hub for dependable centering, while rear-facing slots simplify removal and protect the assembly during service.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these spacers affect vehicle handling?\u003c\/h3\u003e\n\u003cp\u003eWidening the track alters the wheelbase stance, which can reduce body roll and give a more stable feel in corners when paired with proper suspension tuning. These spacers add 2 inches to the axle track, increasing leverage between wheel and chassis and helping distribute lateral forces more evenly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-inch track increase per axle for improved lateral stability\u003c\/li\u003e\n  \u003cli\u003eHub-centric design maintains accurate wheel alignment\u003c\/li\u003e\n  \u003cli\u003eLightweight T6 aluminum minimizes unsprung weight gain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these spacers fit my car and wheels?\u003c\/h3\u003e\n\u003cp\u003eThis specific set uses a 5x100 bolt pattern and a 56.1mm center bore, compatible with a range of Subaru, Scion, and Saab models as listed. Confirm your vehicle’s bolt pattern and hub bore before purchasing, and ensure wheel stud\/pattern compatibility with the M12x1.25 taper bolts provided.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 5x100 — verify against vehicle specifications\u003c\/li\u003e\n  \u003cli\u003eCenter bore: 56.1mm — matches hub-centric mounting surfaces\u003c\/li\u003e\n  \u003cli\u003eIncludes M12x1.25 Dacromet-coated bolts for many compatible wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the construction and hardware durable?\u003c\/h3\u003e\n\u003cp\u003eEach spacer is CNC-machined from solid T6 aircraft-grade aluminum for a high strength-to-weight ratio and consistent tolerances. The supplied M12x1.25 bolts receive Dacromet treatment to resist corrosion far better than plain steel fasteners, extending service life in wet or salty conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 aerospace-grade aluminum body resists fatigue while staying light\u003c\/li\u003e\n  \u003cli\u003eDacromet-coated bolts increase corrosion resistance significantly\u003c\/li\u003e\n  \u003cli\u003eRear slots on the spacer help prevent damage and ease removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with wheel removal and torque procedures. The spacers are engineered with precise fitment to sit flush against the hub; follow the included instructions and torque specs to ensure secure mounting and safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic tools: jack, jack stands, torque wrench, breaker bar\u003c\/li\u003e\n  \u003cli\u003eClear instructions included; spacer slots help alignment and removal\u003c\/li\u003e\n  \u003cli\u003eRecommended: professional installation if you’re unsure of procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who want a reliable, OEM-style wheel spacer solution to widen stance, clear larger brake components, or achieve a flush wheel look without significant added weight. This kit is suited to owners of the listed Subaru, Scion FR-S, and Saab 9-2X models who prefer a hub-centric spacer that balances performance, corrosion resistance, and ease of service. If you need a precise 5x100 conversion with a 56.1mm bore and strong, lightweight construction, this set delivers a practical and long-lasting upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers change my bolt pattern?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — these spacers keep the vehicle bolt pattern and provide a 5x100 configuration with M12x1.25 bolts supplied for compatible wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the included bolts corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes Dacromet-coated M12x1.25 bolts which resist corrosion far better than uncoated steel fasteners.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584982974649,"sku":"B083NYQPC1","price":192.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view-spacers_6d07df6e-3545-4dee-8009-818421858ed7.jpg?v=1790462092"},{"product_id":"orion-motor-tech-4x100-wheel-spacers-2-track-increase-56-1mm-hub-bore-set-of-4-t6-aluminum","title":"Orion Motor Tech 4x100 Wheel Spacers — 2\" Track Increase, 56.1mm Hub Bore Set of 4, T6 Aluminum","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech OMT 4x100 wheel spacers are a 2-inch hub-centric spacer kit (56.1mm bore) designed to widen your vehicle's track for improved handling and a flush wheel fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese spacers are machined from T6 aircraft-grade aluminum, fitted with Dacromat-coated M12x1.5 bolts, and engineered to be hub-centric for stability and simplified installation. The set of four adds two inches to the axle track, bringing wheels outward to enhance stance, clearance, and cornering balance on compatible 4x100 vehicles. Precision tapering, rear slots, and corrosion-resistant fasteners combine to give a long-lasting, safer upgrade compared with generic stud-style adapters.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these spacers affect my vehicle's handling?\u003c\/h3\u003e\n\u003cp\u003eMoving the wheels outward by 2 inches widens the track width, which can increase lateral stability and reduce body roll during cornering. The hub-centric design centers each spacer on the hub to maintain proper wheel alignment and reduce vibration risks that can occur with non-hub-centric adapters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-inch track increase per axle for improved cornering balance\u003c\/li\u003e\n  \u003cli\u003eHub-centric bore (56.1mm) keeps wheel runout minimal\u003c\/li\u003e\n  \u003cli\u003ePrecision 60° taper ensures secure seating on factory hubs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these spacers strong and corrosion resistant?\u003c\/h3\u003e\n\u003cp\u003eYes — each spacer is cut from T6 aircraft-grade aluminum to combine light weight with structural strength suitable for automotive use. The kit includes 16 Dacromat-coated M12x1.5 bolts, which are rated significantly higher for corrosion resistance than plain zinc hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 aluminum body for high strength-to-weight performance\u003c\/li\u003e\n  \u003cli\u003eDacromat bolt coating offers 7–10× more corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSlots on the rear face reduce stress and ease removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles fit these OMT 4x100 spacers?\u003c\/h3\u003e\n\u003cp\u003eThis 4x100 bolt pattern with 56.1mm center bore matches many compact and subcompact models from brands such as Honda, Hyundai, Kia, Mercury, Mini, Mitsubishi, Scion, and Toyota across various years up to 2019. Always verify your vehicle's bolt pattern and hub bore before ordering to ensure proper fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4x100 bolt pattern — common on many compact cars\u003c\/li\u003e\n  \u003cli\u003e56.1mm center bore for hub-centric mounting on compatible hubs\u003c\/li\u003e\n  \u003cli\u003eCheck OEM specs or measure hub bore and stud pattern prior to purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for someone with basic automotive tools; the spacers are machined with a 60° taper for accurate seating and include clear instructions. The hub-centric configuration and rear slots simplify alignment and removal, but proper torqueing of hardware and rechecking wheel fasteners after initial miles is essential for safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 16 M12x1.5 Dacromat-coated bolts for secure attachment\u003c\/li\u003e\n  \u003cli\u003e60° taper ensures proper seating on the hub flange\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs and perform a post-installation re-torque after driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who want a reliable, lightweight spacer to achieve a wider stance, improved wheel clearance, or a flush fit without switching wheels — especially owners of 4x100 bolt-pattern vehicles looking for a hub-centric solution with corrosion-resistant hardware. These spacers suit enthusiasts seeking aesthetic and handling improvements while retaining a focus on durable materials and safer mounting compared with stud-style adapters. Always confirm fitment for your make, model, and year before purchasing and consider professional installation if you are unfamiliar with wheel-end work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these spacers fit my 4x100 wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit wheels with a 4x100 bolt pattern and a 56.1mm hub bore; verify your vehicle's specs before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers come with bolts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the set includes 16 M12x1.5 Dacromat-coated bolts for corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584983007417,"sku":"B083NRWDQZ","price":192.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view-packaging.jpg?v=1790462091"},{"product_id":"orion-motor-tech-coolant-pressure-tester-kit-33-piece-vacuum-refill-leak-test-set-with-gauge","title":"Orion Motor Tech coolant pressure tester kit — 33-piece vacuum refill \u0026 leak test set with gauge","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's OMT Master Coolant Pressure Tester Kit is an all-in-one 33-piece system for pressure-testing cooling systems and vacuum-refilling radiators without air pockets.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit combines a vehicle-compatible pressure tester, a vacuum purge and refill tool, plus 23 radiator adapters and accessories in a molded case so technicians and DIY mechanics can find leaks, verify cooling system integrity, and refill coolant quickly and cleanly. Instead of juggling loose adapters or multiple products, this set centralizes the parts and fittings needed for testing header tanks, radiators, heater cores, water pumps, and hoses across many car makes and models.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the kit detect coolant system leaks?\u003c\/h3\u003e\n\n\u003cp\u003eThe included pressure tester pressurizes the cooling circuit to reveal leaks at weak points like hoses, the radiator core, or the head gasket. A controlled pressure hold makes slow leaks visible and helps isolate the source before costly repairs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePressure pump and gauge to raise and monitor system pressure safely.\u003c\/li\u003e\n  \u003cli\u003e22 color-coded adapters plus a universal adapter for tight fits.\u003c\/li\u003e\n  \u003cli\u003eO-rings and brass fittings for secure, leak-free connections.\u003c\/li\u003e\n  \u003cli\u003eClear hoses to observe coolant movement and seeping locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes vacuum refilling better than pouring coolant?\u003c\/h3\u003e\n\n\u003cp\u003eVacuum refilling removes trapped air and draws coolant into the radiator and cooling passages under negative pressure, reducing air pockets that can cause hot spots or poor circulation. This kit’s vacuum pump and refill tool speed refill jobs and ensure the system is filled efficiently and evenly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eVacuum pump evacuates air from the radiator and cooling passages.\u003c\/li\u003e\n  \u003cli\u003ePurge \u0026amp; refill tool pulls coolant in without splashing or overfilling.\u003c\/li\u003e\n  \u003cli\u003eProbe thermometer helps confirm operating temperatures while bleeding.\u003c\/li\u003e\n  \u003cli\u003eEU and US air intake joints support different vehicle inlet standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and components are compatible with the 33-piece set?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit’s 23 adapters cover many European, American, and Asian makes, helping technicians work across a broad vehicle fleet. It’s suitable for testing and refilling header tanks, expansion reservoirs, radiators, heater matrices, water pump outlets, and associated piping.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdapters listed for BMW, Ford, Opel, Fiat, VW, Porsche, Mercedes-Benz, Nissan, Peugeot, Chrysler and more.\u003c\/li\u003e\n  \u003cli\u003eColor-coded and molded size markings speed adapter selection.\u003c\/li\u003e\n  \u003cli\u003eUniversal adapter accommodates non-standard filler necks.\u003c\/li\u003e\n  \u003cli\u003eCompact case organizes tools for shop or mobile service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and features ensure durability and ease of use?\u003c\/h3\u003e\n\n\u003cp\u003eComponents are made from aluminium alloy, brass, nylon and durable rubber so the tools withstand routine shop use without deforming or corroding. The molded carrying case and marked adapters keep parts protected, visible and ready for the next job.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAluminium alloy and brass reduce wear and maintain sealing integrity.\u003c\/li\u003e\n  \u003cli\u003eNylon and rubber elements resist coolant and temperature exposure.\u003c\/li\u003e\n  \u003cli\u003eCustom molded foam case keeps adapters organized and portable.\u003c\/li\u003e\n  \u003cli\u003eWrench, probe thermometer and spare O-rings included for complete service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The OMT Master 33-piece coolant pressure tester and vacuum refill kit is ideal for independent mechanics, mobile technicians, and serious DIYers who service multiple vehicle makes or need a single, reliable solution for leak diagnosis and air-free coolant fills. It’s designed for those who want professional-style testing and refilling without buying separate specialty tools, and for shops that require a portable, organized kit that speeds diagnostics and reduces rework from trapped air.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: With 23 adapters and a universal fitting, it covers many BMW, VW, Ford, Mercedes, Nissan and more; check adapter sizes against your filler neck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I vacuum-refill without removing the radiator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the vacuum refill tool draws coolant into the system through the filler neck, avoiding radiator removal in most vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584984318137,"sku":"B0F8V8H93C","price":186.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-case-and-contents.jpg?v=1790462179"},{"product_id":"orion-motor-tech-26pc-ball-joint-tool-kit-21pc-press-set-with-5pc-front-end-service-forged-steel-case","title":"Orion Motor Tech 26pc Ball Joint Tool Kit — 21pc Press Set with 5pc Front-End Service, Forged Steel Case","description":"\u003cp\u003e\u003cstrong\u003eThe OMT 26pc Ball Joint Tool Kit is a complete press and separator set that removes and installs ball joints, tie rods, and Pitman arms for most domestic and imported 2WD\/4WD vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, heavy-duty kit combines a 21-piece ball joint press assembly with a 5-piece front-end service set and stores everything in a fitted ABS case. Designed for backyard mechanics and professional shops alike, it reduces the need to disassemble control arms and fits common axle types including Dana 28, 30, 35, 44 and 60. Built from forged steel with a protective black oxide finish, the components resist corrosion while delivering the force needed for stubborn suspension fittings.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the kit speed up ball joint and U-joint service?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit’s range of adapters and receiving cups lets you press out and press in joints without removing large suspension pieces, shortening job time and lowering chance of alignment disturbance. Multiple sizes cover most ball joint diameters so you can switch adapters quickly and continue the repair without improvised tools.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e21-piece press set for one-person removal\/installation\u003c\/li\u003e\n  \u003cli\u003eMatched adapters and receiving cups for quick swaps\u003c\/li\u003e\n  \u003cli\u003eWorks with common axle types and vehicle makes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and parts are compatible with this tool kit?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit supports many light trucks, vans, SUVs and passenger cars from major domestic makes, including Chevrolet, Ford, Dodge and GM models with 2WD or 4WD. It handles ball joints, tie rod ends, Pitman arms and U-joints found on Dana-series axles and similar suspension geometries.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Dana 28, 30, 35, 44 and 60 axle applications\u003c\/li\u003e\n  \u003cli\u003eSuitable for light trucks, SUVs, vans and many cars\u003c\/li\u003e\n  \u003cli\u003eIncludes adapters that match most OEM joint diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and portable is the set for frequent shop use?\u003c\/h3\u003e\n\n\u003cp\u003eForged steel construction and a black oxide coating give the tools strength and protection against rust, so they withstand heavy use in garages and mobile repair work. The molded ABS carrying case keeps each component organized and protected during transport, reducing the risk of lost parts on multi-job days.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-strength forged steel components for repeated force\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish resists corrosion in shop environments\u003c\/li\u003e\n  \u003cli\u003eCustom-molded ABS case secures each piece for transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features help a DIYer perform the job safely?\u003c\/h3\u003e\n\n\u003cp\u003eThe press design centers force through the adapter and receiving cup to reduce slippage and avoid unintended impacts on surrounding suspension parts. Clear organization in the case and color-contrast or stamped sizes on pieces (when present) make selection fast, cutting down on incorrect setups that can cause damage or injury.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePress and cup geometry directs applied force accurately\u003c\/li\u003e\n  \u003cli\u003eOrganized case layout reduces setup mistakes\u003c\/li\u003e\n  \u003cli\u003eMultiple adapter sizes minimize improvisation and risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The OMT 26pc Ball Joint Tool Kit is aimed at DIY mechanics who want a reliable all-in-one solution for front-end service, and at independent shops that need a portable, durable set for routine suspension work. If you service ball joints, tie rod ends, Pitman arms or U-joints on light trucks, SUVs or many passenger vehicles and want to avoid disassembling control arms, this kit supplies the adapters, press tools and organized storage to get the job done efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I press out ball joints without removing control arms?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The press and adapter combination lets you remove and install many ball joints without taking control arms off.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my Dana 44 axle on a 4WD truck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally yes; the kit supports Dana 44 and similar axles, but confirm joint diameters before starting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584995688633,"sku":"B0FC69ZLD3","price":382.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-omt-front-packaging_e483954b-d026-4715-b958-e30a7631445d.jpg?v=1790462650"},{"product_id":"orion-motor-tech-26-piece-ball-joint-tool-kit-master-press-separator-set-forged-steel-with-case","title":"Orion Motor Tech 26-Piece Ball Joint Tool Kit — Master Press \u0026 Separator Set, Forged Steel with Case","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's 26-piece master ball joint tool kit is a complete, shop-grade set for removing and installing ball joints, tie rods, Pitman arms, and U-joints on light trucks, SUVs, and many cars without removing control arms.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines a 5-piece front-end service set with a 21-piece ball joint press collection so you have adapters, receiving tubes, separators, and a heavy-duty C-frame press in one organized case. All pieces are forged steel with a black oxide finish to resist corrosion and withstand repeated use in home garages or professional shops. The storage case keeps every component in its own slot so jobs move faster and parts don’t get lost between projects.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit speed up ball joint and tie rod service?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed to let you press in or press out ball joints and tie rods on most vehicles without removing the control arm, saving time and reducing disassembly. Multiple adapter sizes match factory joints and anchor pins so you can work across a wide range of domestic and imported applications. The included separator lets you free stubborn tie rods and Pitman arms safely without hammering on suspension components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e21-piece press adapters accommodate common ball joint and U-joint sizes\u003c\/li\u003e\n  \u003cli\u003eC-frame press and forcing screw apply controlled pressure for safe removal\u003c\/li\u003e\n  \u003cli\u003eSeparator tools remove tie rods and Pitman arms without hammer damage\u003c\/li\u003e\n  \u003cli\u003eReceiving tubes capture pressed-out parts to protect hub and spindle surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and axles are compatible with this set?\u003c\/h3\u003e\n\u003cp\u003eThis set covers most GM, Chevrolet, Ford, Dodge, and many other domestic vehicles, including popular light truck axles and 2WD\/4WD assemblies. It lists compatibility with Dana 28, 30, 35, 44, and 60 axles, making it suitable for many SUVs, pickups, and vans. While it covers a broad range, verify exact joint sizes for older or specialty imports before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks on 2WD and 4WD systems commonly found on pickups and SUVs\u003c\/li\u003e\n  \u003cli\u003eAdapters sized for Dana 28, 30, 35, 44, and 60 axle applications\u003c\/li\u003e\n  \u003cli\u003eUseful for many GM, Ford, Chevrolet, and Dodge platforms\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with many imported light vehicles with common joint dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features keep this kit reliable?\u003c\/h3\u003e\n\u003cp\u003eEvery metal component is forged from high-strength steel to resist bending or cracking under pressure during removal and installation. A black oxide coating helps limit surface corrosion from shop environments or seasonal storage. The forcing screw and C-frame design are built for repeated use, while the molded ABS case protects tools and keeps them ready for the next job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged steel construction for high tensile strength and longevity\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish reduces surface rust and improves tool lifespan\u003c\/li\u003e\n  \u003cli\u003eMolded ABS case secures items and prevents loss or damage\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty forcing screw provides controlled, repeatable force\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to store and transport this ball joint tool kit?\u003c\/h3\u003e\n\u003cp\u003eThe set comes in a custom-molded ABS storage case with designated slots for each adapter, tube, and separator so components remain organized and ready. The case is compact enough for a mechanic’s cart or trunk and protects parts from dirt and impact during transport between jobs. Clear placement reduces search time and helps maintain an inventory of all 26 pieces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom-molded slots for neat organization and quick access\u003c\/li\u003e\n  \u003cli\u003eCompact ABS case fits in shop cabinets or vehicle trunks\u003c\/li\u003e\n  \u003cli\u003eCase protects tools from dust, grime, and accidental damage\u003c\/li\u003e\n  \u003cli\u003eHelps track every piece before leaving the worksite\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech 26-piece master ball joint tool kit is ideal for DIY mechanics who want a professional-grade press set, independent repair shops that need a portable and durable solution, and fleet owners who service light trucks and SUVs. If you frequently replace ball joints, tie rods, or U-joints or need a reliable kit that spans common domestic axle sizes, this set provides the adapters, forcing tools, and storage to get the job done neatly and safely.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my truck's axles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits most GM, Ford, Chevrolet, and Dodge light trucks and SUVs, including Dana 28\/30\/35\/44\/60. Check your joint diameter against the adapter sizes to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I press ball joints without removing control arms?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 21-piece press adapters and C-frame design let you press joints in-place on many vehicles, saving time and extra disassembly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67584996966585,"sku":"B0GLNK61J1","price":357.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-packaging_8cb5d116-37ff-4536-86e8-2805be814d80.jpg?v=1790462728"},{"product_id":"orion-motor-tech-22pc-slide-hammer-puller-set-5-lb-slide-hammer-heat-treated-steel-for-bearings-seals","title":"Orion Motor Tech 22pc Slide Hammer Puller Set — 5 lb Slide Hammer, Heat-Treated Steel for Bearings \u0026 Seals","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's 22-piece slide hammer puller set is a multi-purpose removal kit that converts into axle, bearing, seal and dent pullers to handle a wide range of automotive extraction jobs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, workshop-ready kit combines a 5 lb slide hammer with multiple adapters, internal and external jaws, and specialty attachments so you can remove press-fit bearings, wheel hubs, seals, CV joints and small dents without buying separate tools. Components are made from heat-treated AISI 1045 and AISI 5140 steel with corrosion-resistant coatings; the kit covers common inner-diameter sizes used on cars and light trucks and is designed for repeated garage use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this set remove stubborn bearings and seals?\u003c\/h3\u003e\n\u003cp\u003eThe slide hammer provides consistent impact force while interchangeable jaws and adapters let you apply that force directly to internal or external surfaces. Use internal jaws to pull from behind a bearing and external jaws to grip an outer race or hub, depending on what’s accessible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5 lb slide hammer supplies repeatable pulling force for press-fit parts\u003c\/li\u003e\n  \u003cli\u003e2-jaw and 3-jaw yokes for internal and external extraction\u003c\/li\u003e\n  \u003cli\u003eBearing adapters covering 1\"–2-7\/8\" inner diameters\u003c\/li\u003e\n  \u003cli\u003eErgonomic T-handle for controlled strikes and safer operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicle sizes and parts are compatible with the kit?\u003c\/h3\u003e\n\u003cp\u003eThe included adapters and jaws fit the majority of passenger cars and light-duty trucks. The kit’s range of inner-diameter adapters plus CV joint and dent puller attachments make it suitable for hub seals, axle stubs, wheel bearings and smaller bodywork pull tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdapters for 1\"–1-7\/8\", 1-5\/16\"–2-3\/8\" and 1-3\/8\"–2-7\/8\" inner diameters\u003c\/li\u003e\n  \u003cli\u003eCV joint puller attachment for common drive-axle jobs\u003c\/li\u003e\n  \u003cli\u003eDent puller accessory for small body repairs\u003c\/li\u003e\n  \u003cli\u003eDesigned for cars and light-duty trucks rather than heavy commercial vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable are the tools in this kit?\u003c\/h3\u003e\n\u003cp\u003eKey components are machined from AISI 1045 and AISI 5140 steels and heat-treated for strength; electrocoating helps resist rust and grime. The straightforward construction lets you maintain or replace individual adapters and jaws as they wear, extending the kit’s working life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-treated steel construction for high-impact resilience\u003c\/li\u003e\n  \u003cli\u003eElectrophoretic coatings for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eThreaded fittings and modular parts allow single-piece replacement\u003c\/li\u003e\n  \u003cli\u003eCompact case (if supplied) keeps components organized for longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use the slide hammer safely and effectively?\u003c\/h3\u003e\n\u003cp\u003ePosition the appropriate jaw or adapter so the puller bears evenly on the part to be removed, then apply steady hammer pulls with the T-handle, controlling recoil and impact direction. Wear eye protection and gloves, secure the workpiece, and inspect threads and fittings frequently to avoid slippage or damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelect internal or external jaws based on access and part geometry\u003c\/li\u003e\n  \u003cli\u003eKeep hands clear of the hammer path and use a controlled sliding motion\u003c\/li\u003e\n  \u003cli\u003eCheck adapter seating and thread tightness before each pull\u003c\/li\u003e\n  \u003cli\u003eUse penetrating lubricant for seized components to reduce shock loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? The Orion Motor Tech 22pc slide hammer puller set is built for DIY mechanics, mobile technicians and small shop owners who need a single, adaptable toolset for recurring extraction work. It’s a practical choice when you want to remove bearings, seals, CV joints, axle shafts or small dents without renting specialty equipment or carrying multiple single-purpose pullers. If you work on passenger cars or light trucks and value rugged construction, modular parts and a broad adapter range, this kit gives a high degree of versatility for routine and occasional repair tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit remove wheel bearings without a press?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—using the internal jaws and appropriate adapter, the slide hammer can extract many press-fit bearings that would otherwise need a press.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 5 lb slide hammer suitable for heavy-duty trucks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hammer is designed for cars and light trucks; very large commercial axles may need heavier-duty equipment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585001521337,"sku":"B0F2MMRZM2","price":288.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-slide-hammer-front-view.jpg?v=1790462945"},{"product_id":"orion-motor-tech-truck-hub-seal-installer-kit-for-class-7-8-trucks-aluminum-5-driver-set-with-extension-handles","title":"Orion Motor Tech Truck Hub Seal Installer Kit for Class 7 \u0026 8 Trucks — Aluminum 5-Driver Set with Extension Handles","description":"\u003cp\u003e\u003cstrong\u003eThe OMT Truck Hub Seal Installer Kit from Orion Motor Tech is a complete aluminum driver set designed to install and remove wheel hub seals on Class 7 and 8 trucks quickly and accurately.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen servicing heavy-duty wheel hubs, a purpose-built installer reduces time and prevents seal damage. This kit groups five driver sizes, two extension handles, and a blow-molded case so technicians can reach seals without removing brake drums on many over-the-road and medium-duty trucks. Its corrosion-resistant aluminum drivers are lightweight yet durable for repeated shop use and field repairs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit make hub seal installation faster and neater?\u003c\/h3\u003e\n\n\u003cp\u003eThe included drivers match common hub seal diameters so you can seat a seal squarely the first time, cutting rework. Two extension handles give extra leverage and reach, enabling work through the hub opening or from awkward angles.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFive discrete driver sizes for accurate seal seating\u003c\/li\u003e\n  \u003cli\u003eExtension handles provide reach and controlled force\u003c\/li\u003e\n  \u003cli\u003eAluminum construction minimizes marring and corrosion\u003c\/li\u003e\n  \u003cli\u003eBlow-molded case keeps tools organized for rapid access\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat truck models and service scenarios is the set compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThis installer set is built for the most common Class 7 and Class 8 long-haul trucks and many trailers, plus select medium-duty applications. It’s suitable for on-truck seal replacement, depot maintenance, and roadside repairs where removing the drum is impractical.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits a wide range of Class 7 \u0026amp; 8 hub seal sizes\u003c\/li\u003e\n  \u003cli\u003eWorks on many trailer and medium-duty truck hubs\u003c\/li\u003e\n  \u003cli\u003eUseful for both shop and field service environments\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce need for drum removal in many cases\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and case features ensure durability and portability?\u003c\/h3\u003e\n\n\u003cp\u003eThe driver pieces are machined from high-grade aluminum for strength, low weight, and resistance to rust. The kit stores in a blow-molded plastic case that protects tools, organizes sizes clearly, and is easy to carry between jobs or keep in a service truck.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant aluminum drivers for long service life\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined surfaces to avoid seal damage\u003c\/li\u003e\n  \u003cli\u003eSturdy blow-molded case for organized transport\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits into service truck storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the extension handles improve control during installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe two extension handles increase leverage and allow you to apply steady, centered force when seating seals. They help reach recessed seals without placing pressure on adjacent bearings and eliminate awkward hammer strikes that can deform components.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eImproved reach for recessed or tight-access hubs\u003c\/li\u003e\n  \u003cli\u003eSmoother, more controlled impact transfer compared with improvised tools\u003c\/li\u003e\n  \u003cli\u003eReduces risk of sealing lip distortion or bearing contact\u003c\/li\u003e\n  \u003cli\u003eHandles store neatly in the case with the drivers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Orion Motor Tech OMT Truck Hub Seal Installer Kit is intended for fleet mechanics, heavy-duty technicians, trailer shops, and owner-operators who perform routine hub service. If you need a portable, corrosion-resistant driver set that fits common Class 7 and 8 hubs and speeds seal replacement without expensive specialty presses, this kit provides the essential sizes and reach for effective field and shop work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit install seals without removing the brake drum?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Often yes—extension handles and correct driver sizes let you seat many seals without drum removal, but checks per hub model are advised.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the drivers corrosion-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the drivers are machined from aluminum to resist rust and deliver long service life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585004699833,"sku":"B0B4N3SMTG","price":186.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-hub-seal-installer-kit-case-open.jpg?v=1790463118"},{"product_id":"orion-motor-tech-bearing-race-seal-driver-kit-15-piece-aluminum-adapters-blow-mold-case","title":"Orion Motor Tech Bearing Race \u0026 Seal Driver Kit — 15-Piece Aluminum Adapters, Blow-Mold Case","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech OMT 15-piece Bearing Race \u0026amp; Seal Driver Kit is a complete, heavy-duty set for installing bearing races, seals, and bearings without damaging housings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit gathers everything a mechanic or DIYer needs to fit bearing races and seals cleanly and quickly. Designed for light trucks, vans, and SUVs, the set pairs durable, corrosion-resistant aluminum adapters with knurled and pneumatic handles so you can work precisely and with less effort. A blow-molded case keeps all pieces organized for shop or mobile use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit make race and seal installation easier?\u003c\/h3\u003e\n\u003cp\u003eThe kit reduces the risk of misaligned installations and part damage by providing matched driver faces and handles sized for common axle and hub applications. Using the correct adapter spreads impact force evenly across the part, so races and seals seat true without marring housings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEight dual-sided adapters cover sizes from 2-11\/16\" to 4-1\/8\" for broad compatibility.\u003c\/li\u003e\n  \u003cli\u003eLaser-etched size markings speed selection and reduce guesswork.\u003c\/li\u003e\n  \u003cli\u003eKnurled and pneumatic handles give control and reduce slippage under impact.\u003c\/li\u003e\n  \u003cli\u003eIncludes extra hammer for finishing light to moderate installs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality can I expect?\u003c\/h3\u003e\n\u003cp\u003eComponents are machined from high-strength aluminum alloy and finished with a corrosion-resistant coating to withstand shop environments. That combination keeps each adapter light for handling while providing repeated-use durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy construction balances toughness and weight for easier handling.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish extends service life in humid or salty conditions.\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined seating faces ensure square contact with races and seals.\u003c\/li\u003e\n  \u003cli\u003eBlow-molded case protects tools during transport and storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and jobs is this set compatible with?\u003c\/h3\u003e\n\u003cp\u003eOrion Motor Tech designed the set with common axle and hub sizes in mind, making it suitable for many light trucks, SUVs, and vans. While it covers the majority of routine bearing and seal tasks, check the adapter dimensions against your specific part before starting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdapters sized 2-11\/16\" to 4-1\/8\" fit numerous common automotive bearings and races.\u003c\/li\u003e\n  \u003cli\u003eIdeal for front and rear hub race installations, axle seal seating, and bearing presses.\u003c\/li\u003e\n  \u003cli\u003eWorks for both professional shop use and serious DIY maintenance.\u003c\/li\u003e\n  \u003cli\u003eNot intended as a replacement for vehicle-specific OEM tools when exact tolerances are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the handles and markings improve workflow?\u003c\/h3\u003e\n\u003cp\u003ePractical details like knurling and laser-etched marks cut down on time and frustration. Knurled handles give a non-slip grip for more accurate strikes; the pneumatic handle option reduces user fatigue during repeated installs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKnurled grips prevent slippage during heavy taps or awkward angles.\u003c\/li\u003e\n  \u003cli\u003ePneumatic handle offers steadier, lower-effort use for multiple installs.\u003c\/li\u003e\n  \u003cli\u003eLaser-etched sizes eliminate fading and make the right adapter quick to find.\u003c\/li\u003e\n  \u003cli\u003eIncludes an extra hammer for immediate use without searching the shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Orion Motor Tech 15-piece Bearing Race \u0026amp; Seal Driver Set is best for mechanics, mobile technicians, and skilled DIYers who perform frequent axle, hub, and seal work on light trucks, vans, and SUVs. It’s a practical all-in-one kit for shop floors or roadside service where reliable, repeatable seating of bearings and seals speeds repairs and preserves component life.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this set fit heavy-duty trucks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit targets light trucks, vans, and SUVs; verify adapter dimensions against heavy-duty parts before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the adapters corrosion-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — adapters are aluminum alloy with a corrosion-resistant coating for longer life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585004863673,"sku":"B0F2N37VBN","price":206.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-case_3bbfd4c1-78a2-4c74-95a5-dddd01e06791.jpg?v=1790463117"},{"product_id":"orion-motor-tech-coolant-pressure-tester-kit-33pc-with-23-adapters-pressure-test-vacuum-refill-for-leak-diagnosis","title":"Orion Motor Tech coolant pressure tester kit 33pc with 23 adapters — pressure test \u0026 vacuum refill for leak diagnosis","description":"\u003cp\u003e\u003cstrong\u003eThe Orion Motor Tech OMT 33pc coolant pressure tester kit is a complete diagnostic and vacuum-fill solution that tests cooling systems for leaks and refills coolant without trapped air.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one set bundles pressure testing, vacuum-assisted coolant refilling, and temperature probing into a single, organized kit designed for DIY mechanics and pro technicians. Built with a wide selection of adapters, quality fittings, and a molded case, the kit helps you isolate leaks, verify system integrity, and restore coolant quickly while reducing the risk of air locks.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use this kit to find cooling system leaks?\u003c\/h3\u003e\n\u003cp\u003eSet the pressure tester to the vehicle's specified cooling system pressure and observe for drops that indicate leaks. The included adapters let you attach to different radiator or expansion tank openings so you can test the system without running the engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnect the correct adapter by matching color-coded parts and molded size markings.\u003c\/li\u003e\n  \u003cli\u003ePump the pressure tester to recommended PSI and watch the gauge for pressure loss.\u003c\/li\u003e\n  \u003cli\u003eInspect hoses, radiator, water pump, and head gasket areas while system is pressurized.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this kit refill coolant without introducing air pockets?\u003c\/h3\u003e\n\u003cp\u003eThe vacuum purge and refill tool in the set evacuates air from the cooling system before drawing in fresh coolant, reducing the chance of trapped air that can cause hotspots. A controlled vacuum refill ensures a more complete and consistent coolant exchange compared with top-fill methods.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the vacuum pump and hoses to evacuate system air according to the vehicle procedure.\u003c\/li\u003e\n  \u003cli\u003eAttach the refill tool and allow coolant to be drawn in under vacuum for a full fill.\u003c\/li\u003e\n  \u003cli\u003eVerify coolant level and re-pressurize to check for leaks after filling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and parts are compatible with the 23 adapters?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains a broad assortment of radiator and expansion tank adapters that cover many popular makes and models, letting you work on European, Asian, and domestic cars. Color-coding and molded size indicators speed selection so you can find the right fit faster.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes adapters for OEM-style radiator caps and filler necks used by major brands.\u003c\/li\u003e\n  \u003cli\u003eSuitable for inspecting radiators, overflow tanks, heater cores, water pumps, and hoses.\u003c\/li\u003e\n  \u003cli\u003eUniversal adaptor and extra O-rings help fit less common sizes safely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and features support long-term workshop use?\u003c\/h3\u003e\n\u003cp\u003eComponents are made from aluminum alloy, brass, durable nylon, and rubber seals to resist wear and hold pressure during repeated use. The kit's molded carrying case keeps parts organized and protected so tools remain ready when needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum and brass fittings for corrosion resistance and strength.\u003c\/li\u003e\n  \u003cli\u003eNylon and rubber elements for flexible, leak-free connections.\u003c\/li\u003e\n  \u003cli\u003eCustom foam\/cavity case with labeled slots for each adapter and accessory.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Orion Motor Tech OMT 33pc kit is aimed at home mechanics upgrading their diagnostic capabilities and professional technicians who need a portable, complete coolant testing and vacuum-fill solution. If you service a variety of vehicle makes or want to perform accurate leak detection and air-free coolant exchanges, this kit provides the adapters, pump, and organization to get the job done efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit test both radiator and expansion tank seals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — use the appropriate adapter to pressurize either the radiator or expansion tank and watch the gauge for pressure loss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this kit on European cars like BMW and Mercedes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 23 adapters include fittings compatible with many European makes including BMW and Mercedes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585018429625,"sku":"B0DNR8C1HD","price":182.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-packaging_16224fac-bf9d-4004-9ece-1b7ced951d17.jpg?v=1790463599"},{"product_id":"orion-motor-tech-blind-hole-bearing-puller-bushing-press-kit-2-in-1-slide-hammer-and-heavy-duty-driver-set","title":"Orion Motor Tech blind-hole bearing puller \u0026 bushing press kit — 2-in-1, slide-hammer and heavy-duty driver set","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's OMT 2-in-1 kit is a complete blind-hole bearing puller and bushing press set designed to remove and install internal bearings, bushings, and seals without damaging surrounding components.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one service kit combines a 16-piece blind bearing puller with a slide hammer and collets plus a 52-piece bushing driver set so you can handle common wheel, axle, and suspension press-fit jobs on cars, ATVs, and light trucks. Built from heavy-duty steel and finished with corrosion-resistant coatings, the tools are organized in custom blow-molded cases for transport and storage. The set covers a wide range of diameters to help you tackle many maintenance and repair tasks with fewer specialty tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit remove blind-hole bearings safely?\u003c\/h3\u003e\n\u003cp\u003eThe blind bearing puller uses split collets and a slide-hammer-style puller to extract bearings seated below the surface where a typical external puller can't reach. Its design reduces leverage stress on the hub and keeps bearing bores intact during removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16-piece blind bearing assembly with 10 split collets for tight fits\u003c\/li\u003e\n  \u003cli\u003eSlide hammer and puller components for controlled impact extraction\u003c\/li\u003e\n  \u003cli\u003eRange covers 6–59 mm internal diameters for many OE-style bearings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and parts can the bushing press handle?\u003c\/h3\u003e\n\u003cp\u003eThe bushing driver set includes 49 driver discs and a long-handle shaft to press in or out bushings without distorting them. It spans small suspension bushings up to larger hub or carrier sleeves, giving versatility for different vehicle makes and models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBushing discs sized from 18–65 mm plus a 74 mm option\u003c\/li\u003e\n  \u003cli\u003eLong handle shaft for leverage and even pressure during installation\u003c\/li\u003e\n  \u003cli\u003eSuitable for press-fitting bushings, sleeves, and seals without hammering directly on components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the tools hold up to professional garage use?\u003c\/h3\u003e\n\u003cp\u003eParts are machined from heavy-duty steel and treated with corrosion-resistant finishes so they resist wear and maintain fit over repeated jobs. The construction balances strength with precision to avoid deforming bearing and bushing surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable steel components built for repeated use\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant coatings extend service life in shop environments\u003c\/li\u003e\n  \u003cli\u003eEngineered joints and tolerances reduce slippage and damage during operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the kit stored and transported between jobs?\u003c\/h3\u003e\n\u003cp\u003eAll pieces are arranged in custom blow-molded cases that lock tools in place and make it easy to inventory parts before leaving the shop or trailer. The molded trays protect delicate collets and discs and keep everything ready to deploy on the job.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo fitted blow-molded cases for the bearing puller and bushing driver sets\u003c\/li\u003e\n  \u003cli\u003eClearly organized trays minimize setup time and loss of small parts\u003c\/li\u003e\n  \u003cli\u003eCompact footprint fits in most shop cabinets or truck storage compartments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT 2-in-1 Blind Hole Bearing Puller \u0026amp; Bushing Press Kit is aimed at DIY mechanics, mobile technicians, and small repair shops that need a versatile, durable set for wheel bearings, axle hubs, suspension bushings, and seals. If you frequently service press-fit components on cars, ATVs, or light trucks and want a single coordinated solution to remove and install internal bearings and bushings without specialized presses, this kit covers common sizes and reduces the need for multiple single-purpose tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What internal bearing sizes does this puller support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The blind-hole puller covers internal diameters from 6 mm up to 59 mm with included split collets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the bushing set include discs for larger suspension bushings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The bushing driver set includes discs from 18–65 mm plus a 74 mm disc for larger bushings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585018593465,"sku":"B0D5B1R93N","price":311.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-packaging_b60ae6cd-930f-4bc7-808c-afe3c2d96c72.jpg?v=1790463594"},{"product_id":"orion-motor-tech-adjustable-trailer-hitch-for-2-5-receiver-dual-ball-18-500-lb-8in-adjustable","title":"Orion Motor Tech Adjustable Trailer Hitch for 2.5\" Receiver — Dual-Ball 18,500 lb, 8in Adjustable","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's adjustable drop hitch for 2.5\" receivers provides a dual-ball towing solution rated up to 18,500 lb with 8 in. of vertical adjustment for precise, heavy-duty towing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for Class V vehicles, commercial rigs, heavy RVs and horse trailers, this adjustable trailer hitch combines high load capacity with corrosion-resistant construction and easy height adjustment. The dual-ball setup lets you tow trailers with different coupler sizes without swapping hardware, while aircraft-grade aluminum and chrome-plated balls reduce weight and resist wear. Built-in anti-rattle features and included theftproof pins deliver safer, quieter towing on long hauls.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the adjustable height make hitching easier?\u003c\/h3\u003e\n\u003cp\u003eThe hitch slides vertically across an 8-inch range so you can quickly match the trailer tongue height to your vehicle. Instead of adding shims or swapping mounts, move the ball assembly to the position that levels your trailer and secure it with the supplied pins. This saves time and reduces strain when hooking up for transport.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8 inches of vertical adjustment for level towing\u003c\/li\u003e\n  \u003cli\u003eSimple pin-and-lock system for fast setup\u003c\/li\u003e\n  \u003cli\u003eStops need for additional lift blocks or shims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich trailers and vehicles is this hitch compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe hitch is engineered to fit standard 2.5\" receivers, commonly found on Class V trucks and many commercial towing platforms. With a 2-5\/16\" ball rated to 18,500 lb and a 2\" ball rated to 8,000 lb, it accommodates a wide range of payloads from heavy equipment trailers to smaller utility trailers. Check your vehicle receiver rating and trailer tongue weight to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits standard 2.5\" receiver tubes on Class V vehicles\u003c\/li\u003e\n  \u003cli\u003e2-5\/16\" ball for heavy trailers up to 18,500 lb\u003c\/li\u003e\n  \u003cli\u003e2\" ball option for lighter trailers up to 8,000 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat features help reduce noise and improve security on the road?\u003c\/h3\u003e\n\u003cp\u003eThis adjustable hitch includes cushion washers to minimize rattle and deliver a smoother ride by absorbing shock between hitch components. Three theftproof pins are provided to secure the ball assembly and locking components, helping prevent unauthorized removal when parked. Together these features keep loads steadier and reduce wear on both hitch and trailer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCushion washers to reduce vibration and rattle\u003c\/li\u003e\n  \u003cli\u003eThree theftproof hitch pins included for security\u003c\/li\u003e\n  \u003cli\u003eChrome-plated balls resist corrosion and maintain finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction give this hitch its strength?\u003c\/h3\u003e\n\u003cp\u003eOrion Motor Tech uses aircraft-grade aluminum alloy in the main assembly to balance strength and lower weight, helping preserve vehicle payload capacity. The towing balls are chrome-plated to withstand corrosion and repeated coupling cycles. Precision machining and robust fasteners deliver the structural integrity needed for heavy-duty towing without excessive mass.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAircraft-grade aluminum alloy body for strength and lightness\u003c\/li\u003e\n  \u003cli\u003eChrome-plated 2-5\/16\" and 2\" balls for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eDurable pins and hardware engineered for heavy loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This adjustable drop hitch is aimed at professional drivers, fleet operators, and owners of heavy RVs, horse trailers, or commercial equipment trailers who need a single, flexible towing solution. If you require a high-capacity hitch that adapts to different trailer heights, reduces vibration, and secures quickly with theft-resistant pins, this Orion Motor Tech unit is a practical choice. Verify your vehicle receiver rating and ensure trailer capacities align with the 18,500 lb and 8,000 lb ball ratings before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hitch fit my 2.5\" receiver?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed specifically for standard 2.5\" receivers found on Class V vehicles; confirm your vehicle rating before towing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need different balls for different trailers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The dual-ball design includes a 2-5\/16\" and a 2\" ball, letting you tow trailers with either coupler size without swapping parts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585022755001,"sku":"B0FXFZHC2F","price":355.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view_07167c1b-4983-4d74-884c-45ba04710a09.jpg?v=1790463806"},{"product_id":"orion-motor-tech-adjustable-trailer-hitch-2-receiver-12-500-lb-dual-ball-7-position-drop-rise","title":"Orion Motor Tech Adjustable Trailer Hitch 2\" Receiver, 12,500 lb Dual-Ball, 7-Position Drop\/Rise","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's adjustable drop hitch is a heavy-duty 2\" receiver hitch with dual tow balls (2-5\/16\" and 2\") rated up to 12,500 lb for versatile towing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hitch combines strength, adjustability, and theft-resistant locking to give drivers a dependable towing solution for a wide range of trailers. Built with solid steel and aerospace-grade aluminum components and a corrosion-resistant finish, the unit resists wear while delivering a stable connection. It fits standard 2\" receivers and provides multiple rise\/drop positions so you can match trailer and vehicle heights without guesswork.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hitch adapt to different trailer heights?\u003c\/h3\u003e\n\u003cp\u003eThe hitch offers seven distinct height settings across a 6\" total drop\/rise range, letting you align trailer tongues and vehicle hitches precisely. Its slide-and-lock mechanism is simple to operate so you can change positions quickly by hand or with basic tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSeven selectable height positions for tailored fit\u003c\/li\u003e\n  \u003cli\u003e6\" total drop\/rise to correct uneven stance between tow vehicle and trailer\u003c\/li\u003e\n  \u003cli\u003eMounts either up or down for additional flexibility\u003c\/li\u003e\n  \u003cli\u003eSmooth slider mechanism for fast adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat towing capacities and ball sizes are included?\u003c\/h3\u003e\n\u003cp\u003eThis model features a dual-ball head: a large 2-5\/16\" ball rated to tow up to 12,500 lb and a smaller 2\" ball rated to 8,000 lb. Having both ball sizes integrated eliminates the need to swap heads and lets you tow different trailers with the same hitch quickly and safely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2-5\/16\" ball — 12,500 lb capacity for heavy trailers and equipment\u003c\/li\u003e\n  \u003cli\u003e2\" ball — 8,000 lb capacity for lighter trailers and accessories\u003c\/li\u003e\n  \u003cli\u003eDual design reduces downtime switching balls between trailers\u003c\/li\u003e\n  \u003cli\u003eClear capacity markings reduce misapplication risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it secure and durable for long trips and harsh conditions?\u003c\/h3\u003e\n\u003cp\u003eThe hitch uses solid steel construction and aerospace-grade aluminum parts, finished with a corrosion-resistant coating to withstand road salt and weather. Included locking pins secure the adjustable components against loosening and offer basic theft deterrence when parked.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-gauge steel body for high tensile strength under load\u003c\/li\u003e\n  \u003cli\u003eAerospace-grade aluminum where weight savings and corrosion resistance matter\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish protects against rust and abrasion\u003c\/li\u003e\n  \u003cli\u003eLocking pins prevent accidental separation and discourage theft\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and everyday use?\u003c\/h3\u003e\n\u003cp\u003eDesigned for user-friendly installation, the hitch slides into any 2\" receiver and secures with common pins or the supplied locking hardware. Adjustments are tool-light: slide to desired height, engage the locking hole, and secure the pin. Its up-or-down mounting and clear settings make it practical for frequent hitching tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits standard 2\" receiver hitches for broad compatibility\u003c\/li\u003e\n  \u003cli\u003eQuick slide-and-lock adjustment for fast setup\u003c\/li\u003e\n  \u003cli\u003eMounts in both orientations to increase versatility\u003c\/li\u003e\n  \u003cli\u003eIncludes locking pins for immediate securement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: Drivers who need a rugged, flexible towing solution — from weekend campers and boat owners to contractors hauling equipment — will appreciate the Orion Motor Tech adjustable drop hitch. It’s aimed at users who tow different trailers and require a reliable, corrosion-resistant unit that’s simple to adjust and rated for high-capacity loads. If you want one hitch that covers multiple ball sizes and height settings without sacrificing strength, this model is built for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum towing capacity for this hitch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hitch's 2-5\/16\" ball is rated to 12,500 lb; the included 2\" ball is rated to 8,000 lb.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my vehicle's receiver?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it is designed for standard 2\" receiver hitches and mounts up or down for flexibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585022886073,"sku":"B0DBYZ6P1R","price":267.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view_0c6a8981-2d94-4022-af42-d67a82c989fb.jpg?v=1790463808"},{"product_id":"orion-motor-tech-23-piece-ball-joint-press-kit-9-c-frame-chrysler-4-point-sockets-forged-steel","title":"Orion Motor Tech 23-Piece Ball Joint Press Kit — 9\" C-Frame, Chrysler 4-Point Sockets, Forged Steel","description":"\u003cstrong\u003eOrion Motor Tech’s 23-piece ball joint press kit is a professional-grade set that removes and installs press-fit ball joints, U-joints, and brake anchor pins quickly and safely.\u003c\/strong\u003e\n\n\u003cp\u003eIf you work on suspension or drivetrain components, the right press kit saves time and prevents damage. This 23-piece Orion Motor Tech tool set pairs a heavy-duty C-frame press with an assortment of receiving tubes, adapters and two specially sized 4-point sockets that fit many Chrysler upper ball joints. Built from forged AISI 1045 carbon steel and blackened for corrosion resistance, the kit is engineered to endure repeated shop use while delivering controlled, straight-line force.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit simplify removing stubborn ball joints?\u003c\/h3\u003e\n\u003cp\u003eThe C-frame press provides a 6-inch opening and a long jackscrew to align force precisely, so you can press out seized joints without hammering or cutting. The included receiving tubes and adapters cradle the joint for even pressure and protect surrounding suspension components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e9-inch C-frame press with 6-inch throat and extra-long jackscrew for reach and leverage\u003c\/li\u003e\n  \u003cli\u003eMultiple receiving tubes to support the control arm or knuckle during pressing\u003c\/li\u003e\n  \u003cli\u003eAdapters and cups minimize marring on casting and maintain alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the sockets in this kit fit Chrysler upper ball joints?\u003c\/h3\u003e\n\u003cp\u003eYes—two 4-point sockets in sizes 1-59\/64\" and 2-9\/64\" are included specifically to match many Chrysler-style upper ball joint applications. They provide a precise interface so you can press joints in and out without rounding corners or slipping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo Chrysler-compatible 4-point socket sizes for accurate engagement\u003c\/li\u003e\n  \u003cli\u003eSecure fit reduces risk of damage to joint studs and housings\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated use on Chrysler, Dodge, Jeep upper joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and jobs can I tackle with this ball joint tool kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is built to handle most 2WD and FWD models from major manufacturers, including GM, Ford, Chrysler, Jeep and Dodge, making it a versatile addition to a home or professional shop. It works for ball joints, U-joints and brake anchor pins wherever press-fit removal is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many GM, Ford, Chrysler, Jeep and Dodge models\u003c\/li\u003e\n  \u003cli\u003eUseful for ball joint replacement, U-joint service, and brake anchor pin work\u003c\/li\u003e\n  \u003cli\u003eAdapters and tubes cover a broad range of diameters and mounting geometries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and shop-ready is the Orion Motor Tech press kit?\u003c\/h3\u003e\n\u003cp\u003eThe components are forged from AISI 1045 carbon steel and treated with a blackened finish to resist rust and wear. Heavy-duty construction and thoughtfully sized parts mean the kit stands up to repeated pressing tasks while maintaining safe, predictable performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAISI 1045 forged carbon steel construction for strength and toughness\u003c\/li\u003e\n  \u003cli\u003eBlackened finish adds corrosion resistance and reduces surface wear\u003c\/li\u003e\n  \u003cli\u003eRobust jackscrew and frame designed for repeated professional use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Orion Motor Tech 23-piece ball joint press kit is ideal for DIY mechanics, backyard restorers, and professional technicians who need a reliable, all-in-one solution for press-fit suspension and drivetrain parts. If you regularly service ball joints, U-joints or brake anchor pins—especially on Chrysler-family vehicles—this kit gives the reach, sockets and adapters to get the job done with less risk of damage and fewer trips to a machine shop.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit Chrysler upper ball joints?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes two 4-point sockets (1-59\/64\" and 2-9\/64\") made to fit many Chrysler-style upper ball joints.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this press kit on U-joints and brake anchor pins?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The receiving tubes and adapters accommodate most press-fit U-joints and brake anchor pins on 2WD and FWD vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585026556089,"sku":"B0CX9H2Y27","price":274.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-omt-23pc-kit-front-packaging.jpg?v=1790463967"},{"product_id":"orion-motor-tech-5-ton-bushing-driver-bearing-press-kit-66-pc-hardened-steel-set-with-blow-molded-cases","title":"Orion Motor Tech 5-Ton Bushing Driver \u0026 Bearing Press Kit — 66-Pc Hardened Steel Set with Blow-Molded Cases","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech's 5-ton bushing driver and bearing press kit is a complete, heavy-duty 66-piece set that lets you remove and install bushings, bearings, gears, pulleys and steering wheels with a single portable system.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one workshop kit combines a 14-piece bearing puller assembly and a 52-piece bushing driver collection into a single organized package. Built from hardened steel with corrosion-resistant finishes and supplied in blow-molded cases, the set is designed to simplify automotive, ATV and light-truck jobs by reducing the need to hunt for specialty tools. Whether you’re a home mechanic or a professional technician, this kit centralizes the most common sizes and pulling\/pressing components for quick, repeatable service.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit remove bearings and pulleys safely?\u003c\/h3\u003e\n\u003cp\u003eThe 14-piece bearing puller and separator components use two pairs of jaws and eight extension screws to clamp and extract pressed-on parts without damaging housings. The included bearing separator evenly transfers force to the press ram so bearings and pulleys come out straight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e14pc bearing puller with two jaw sets for internal or external grip\u003c\/li\u003e\n  \u003cli\u003eBearing separator to protect hubs and housings from uneven force\u003c\/li\u003e\n  \u003cli\u003eEight extension screws for deeper or obstructed pulls\u003c\/li\u003e\n  \u003cli\u003e5-ton capacity press ram to tackle stubborn, press-fit parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich bushing sizes and applications are covered by the driver set?\u003c\/h3\u003e\n\u003cp\u003eThe bushing driver section contains 49 discs that cover internal diameters from 18 mm up to 65 mm and a dedicated 74 mm disc for larger sleeves. The discs are paired with a long-handle shaft and adapters so you can install or remove bushings in suspension components, control arms, and small-frame assemblies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e49 bushing discs spanning common automotive sizes (18–65 mm) plus a 74 mm disc\u003c\/li\u003e\n  \u003cli\u003eLong-handle shaft for controlled, centered pressing\u003c\/li\u003e\n  \u003cli\u003eAdapters to match bushings in cars, ATVs, and light trucks\u003c\/li\u003e\n  \u003cli\u003eDesigned to limit marring and to align drivers on the workpiece\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this set durable and easy to store?\u003c\/h3\u003e\n\u003cp\u003eEvery working component is made from heavy-duty steel and treated with a corrosion-resistant finish to withstand workshop wear. Rather than loose pieces in a box, the kit arrives in custom blow-molded cases that lock components in place for transport and organized storage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardened-steel construction for press and pull parts\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant coatings for longer life in garages\u003c\/li\u003e\n  \u003cli\u003eTwo custom blow-molded cases for neat organization and mobility\u003c\/li\u003e\n  \u003cli\u003eClearly labeled recesses to prevent lost bits and speed job setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the kit safely and efficiently?\u003c\/h3\u003e\n\u003cp\u003eStart by selecting the correct disc or jaw size and align it perpendicular to the shaft or separator to avoid side-loads. Use the long-handle shaft for controlled tapping and the 5-ton press for final, steady force; always secure the workpiece and wear eye protection and gloves.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch disc\/jaw to part diameter before applying force\u003c\/li\u003e\n  \u003cli\u003eCenter the tool to avoid binding or housing damage\u003c\/li\u003e\n  \u003cli\u003eUse gradual, even pressure with the press ram or handle\u003c\/li\u003e\n  \u003cli\u003eFollow basic workshop safety: gloves, eye protection, stable supports\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Orion Motor Tech kit is aimed at DIY enthusiasts, mobile mechanics and small repair shops that need a versatile, durable solution for common bushing and bearing jobs without buying multiple specialty tools. It’s particularly useful when you want a portable, organized set that covers a broad range of sizes for cars, ATVs and light trucks, and where controlled, repeatable pressing or pulling is required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit work on both cars and ATVs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The included discs and puller components cover common sizes for cars, ATVs, and light trucks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum press capacity?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The press assembly supports up to a 5-ton capacity for stubborn bearings and pressed-on parts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585028653241,"sku":"B0D7VC9DKV","price":348.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-packaging_d10f3756-24b8-48c2-a324-475edaf8f417.jpg?v=1790464094"},{"product_id":"orion-motor-tech-6x5-5-wheel-spacers-set-of-4-108mm-hub-bore-4-track-increase-t6-aluminum","title":"Orion Motor Tech 6x5.5 Wheel Spacers Set of 4 — 108mm Hub Bore, 4\" Track Increase, T6 Aluminum","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech OMT 6x5.5 wheel spacers are a set of four precision-machined, 108mm center-bore aluminum spacers that widen your axle track for improved stance and vehicle stability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese OMT spacers are engineered to fit many Chevrolet and GMC trucks and SUVs, providing a safe, corrosion-resistant way to push wheels outward for improved handling and clearance. Constructed from T6 aircraft-grade aluminum and supplied with Dacromet-coated M14x1.5 bolts, the kit balances strength, light weight, and long-term corrosion protection. The spacers include rear-face slots for easier removal and are designed for straightforward installation using standard tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these spacers affect handling and cornering?\u003c\/h3\u003e\n\u003cp\u003eWidening the track by moving the wheels outward increases lateral stability and reduces body roll during cornering. These spacers do not alter suspension geometry dramatically but provide a broader footprint that can make steering feel more stable at speed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4-inch track increase for more planted handling\u003c\/li\u003e\n  \u003cli\u003eReduced lateral weight transfer in turns\u003c\/li\u003e\n  \u003cli\u003ePrecision machined to maintain wheel alignment and balance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and wheel bolt patterns are compatible with this set?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses a 6x5.5 (6x139.7) bolt pattern with a 108mm center hub bore and fits a wide range of Chevrolet and GMC full-size trucks and SUVs from the 1990s through the 2010s. Always verify factory hub bore, bolt pattern, and lug size before ordering to ensure a correct fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many Chevrolet K1500, Silverado, Tahoe, Suburban models\u003c\/li\u003e\n  \u003cli\u003eCompatible with GMC Sierra, Yukon, Yukon Denali, Yukon XL models\u003c\/li\u003e\n  \u003cli\u003eIncludes M14x1.5 bolts—confirm your vehicle’s lug specifications first\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and features ensure durability and safety?\u003c\/h3\u003e\n\u003cp\u003eOMT spacers are CNC-machined from T6 aircraft-grade aluminum for a high strength-to-weight ratio. The bolt set uses Dacromet coating for superior corrosion resistance compared with plain steel fasteners, helping the kit hold up in wet and salted-road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 aircraft-grade aluminum body for strength and lightness\u003c\/li\u003e\n  \u003cli\u003e24 Dacromet-coated M14x1.5 bolts for enhanced rust resistance\u003c\/li\u003e\n  \u003cli\u003eRear-face slots allow easier removal and protect the spacer during maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with wheel removal and basic torque procedures. The spacers are precision-machined to fit over the vehicle hub, and the kit includes bolts and instructions for a secure fit-up; no specialized presses are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires standard sockets, torque wrench, and jack stands\u003c\/li\u003e\n  \u003cli\u003eClear instructions guide bolt torque sequence and retorque intervals\u003c\/li\u003e\n  \u003cli\u003eRear slots help when prying spacers free during reinstallation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT 6x5.5 wheel spacer set is made for truck and SUV owners who want a wider stance, improved visual presence, and enhanced lateral stability without permanent suspension modification. It’s well suited to owners of compatible Chevrolet and GMC models who need a durable, corrosion-resistant spacer solution that’s easy to install with common tools. If you plan heavy towing, off-road modifications, or custom wheel setups, verify load and clearance specifications with a professional installer before fitting spacers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers require hub-centric rings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No hub rings are included; the 108mm center bore is hub-centric for compatible hubs, but confirm your hub diameter before fitting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these spacers affect my vehicle warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Aftermarket spacers can impact warranty coverage on components affected by installation; check with your dealer or installer for specifics.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585029243065,"sku":"B0924H4QMD","price":273.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view-spacers_6dfd671c-3068-4180-a3b0-c7ab2a9febb1.jpg?v=1790464119"},{"product_id":"orion-motor-tech-5x5-wheel-spacers-3-inch-set-of-4-71-5mm-hub-centric-t6-aluminum-with-dacromat-bolts","title":"Orion Motor Tech 5x5 Wheel Spacers 3-inch Set of 4 — 71.5mm Hub-Centric, T6 Aluminum with Dacromat Bolts","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech OMT 5x5 wheel spacers are a set of four 3-inch, hub-centric aluminum spacers that widen your axle track for improved stability and a flush wheel fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese OMT 5x5 spacers are precision-machined from T6 aircraft-grade aluminum and engineered with a 71.5mm center hub bore to match many Jeep models. They come as a complete kit of four spacers plus 20 Dacromat-coated 1\/2\"-20 bolts designed to resist corrosion far better than standard hardware. Built for durability and easy installation, these spacers give your vehicle a wider stance and a more aggressive look without modifying factory hubs or wheels.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these spacers change vehicle handling and stance?\u003c\/h3\u003e\n\u003cp\u003eBy pushing the wheels outward by 3 inches total track width, the spacers increase the vehicle's track and reduce body roll, contributing to more predictable cornering behavior. The wider stance also shortens the effective lever arm between the center of gravity and tire contact patch, improving lateral stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdds 3 inches to axle track for improved cornering stability\u003c\/li\u003e\n  \u003cli\u003eHub-centric design centers the wheel on the hub for reduced vibration\u003c\/li\u003e\n  \u003cli\u003eImproved tire clearance for fender flare fitment and visual stance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these spacers fit my Jeep model and wheels?\u003c\/h3\u003e\n\u003cp\u003eThese spacers are specifically sized with a 5x5 (5x127mm) bolt pattern and a 71.5mm center bore, matching many Jeep applications. Listed fitments include Jeep Commander XK, Grand Cherokee WJ\/WK, and Wrangler JK models; verify your vehicle year and wheel hub dimensions before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 5x5 (5x127mm)\u003c\/li\u003e\n  \u003cli\u003eCenter bore: 71.5mm hub-centric fit\u003c\/li\u003e\n  \u003cli\u003eCompatible with specified Jeep models (double-check your hub measurements)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are included, and how do they affect longevity?\u003c\/h3\u003e\n\u003cp\u003eThe spacers are machined from T6 aircraft-grade aluminum for a high strength-to-weight ratio and corrosion resistance. The kit includes 20 Dacromat-coated 1\/2\"-20 bolts that provide substantially greater corrosion resistance than uncoated hardware, helping the assembly last longer in road and off-road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 aircraft-grade aluminum construction for strength and light weight\u003c\/li\u003e\n  \u003cli\u003eDacromat-coated 1\/2\"-20 bolts, more corrosion resistant than standard bolts\u003c\/li\u003e\n  \u003cli\u003eRear slots in the spacer simplify removal and reduce wear during use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what safety features are built in?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward with the included hardware and clear instructions; the hub-centric design reduces the need for shims or adapters and helps ensure wheel concentricity. Unique rear slots on the spacers make removal easier and help prevent damage during service, while precision machining promotes safe, consistent torque readings when mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-machined for accurate fit and dependable torque values\u003c\/li\u003e\n  \u003cli\u003eHub-centric for reduced vibration and improved safety versus stud-style spacers\u003c\/li\u003e\n  \u003cli\u003eSlots on the rear face allow easier removal and longer service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These Orion Motor Tech OMT 5x5 wheel spacers are aimed at Jeep owners who want a wider, more stable stance, improved wheel fitment, or the ability to run different wheel offsets without permanent hub modifications. They suit enthusiasts focused on improved handling, visual stance upgrades, or fitting larger tires while maintaining factory hub integrity. Always confirm fitment and consult a professional installer if unsure about suspension or brake clearance before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these spacers hub-centric or lug-centric?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These OMT 5x5 spacers are hub-centric with a 71.5mm center bore to center the wheel on the hub and minimize vibration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the spacers include all necessary bolts for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit includes 20 Dacromat-coated 1\/2\"-20 bolts rated for improved corrosion resistance and installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585029275833,"sku":"B01MYYY0P3","price":250.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-view-packaging_561339d7-dd94-4b79-807d-f171ca899897.jpg?v=1790464120"},{"product_id":"orion-motor-tech-4x4-wheel-spacers-59-3mm-hub-bore-set-of-4-2-cnc-t6-aluminum-with-bolts","title":"Orion Motor Tech 4x4 Wheel Spacers 59.3mm Hub Bore Set of 4 — 2\" CNC T6 Aluminum with Bolts","description":"\u003cstrong\u003eOrion Motor Tech OMT 4x4 wheel spacers are a set of four, precision-machined 2\" spacers with a 59.3mm center hub bore that widen your track for improved stability and a more aggressive stance.\u003c\/strong\u003e\n\n\u003cp\u003eIf you want to broaden the stance of a golf cart, go-cart or ATV without changing wheels, these spacers provide a straightforward bolt-on solution. Machined from T6 aircraft-grade aluminum, the kit includes 16 Dacromat-coated 1\/2\"-20 bolts and is engineered for repeated installation and removal. The spacers are designed to increase wheel track and clearance while distributing load across a solid hub seat.\u003c\/p\u003e\n\n\u003ch3\u003eHow much wider will my vehicle become after installing these spacers?\u003c\/h3\u003e\n\u003cp\u003eEach spacer is 2 inches thick and the set includes four, so installing a spacer on each wheel increases overall axle track by up to 4 inches. That wider track improves lateral stability and gives a fuller, more planted look without altering wheel size.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2\" thickness per spacer (one per wheel).\u003c\/li\u003e\n  \u003cli\u003eUp to 4\" added to axle track with all four spacers installed.\u003c\/li\u003e\n  \u003cli\u003eWorks with stock wheel\/tire setups—no wheel replacement required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my wheels and hub assembly?\u003c\/h3\u003e\n\u003cp\u003eThe spacers feature a 59.3mm (approx. 2.34\") center hub bore to match wheels with equal or smaller hub pilot diameters. They are intended for 4-lug applications and for hubs with studs 2 inches or shorter; always confirm stud length and pilot diameter before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e59.3mm center hub bore—fits wheels with matching or smaller hub pilots.\u003c\/li\u003e\n  \u003cli\u003eDesigned for 4-lug wheel patterns and 4x4\" bolt circles.\u003c\/li\u003e\n  \u003cli\u003eCompatible with studs up to 2\" in length—verify your vehicle’s stud specification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are included, and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThese spacers are CNC-machined from T6 aircraft-grade aluminum to balance light weight with strength. The kit includes 16 Dacromat-coated 1\/2\"-20 bolts that resist corrosion better than standard hardware, and the spacer’s rear-face slots make removal easier while reducing the risk of damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 aircraft-grade aluminum for high strength-to-weight ratio.\u003c\/li\u003e\n  \u003cli\u003e16 Dacromat-coated 1\/2\"-20 bolts included for improved corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eRear slots on each spacer for easier removal and extended service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic wheel removal and torqueing procedures. The spacers are precision machined for a snug hub fit, and the kit comes with clear instructions; still, use a torque wrench and follow vehicle manufacturer torque specs for lug nuts and new bolts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic tools required: jack, stands, lug wrench, torque wrench.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific torque values and tightening sequence.\u003c\/li\u003e\n  \u003cli\u003eInspect fitment and stud length before final driving; re-torque after short initial use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These Orion Motor Tech spacers suit owners of golf carts, go-carts and small ATVs with a 4-lug wheel pattern who want a wider stance, increased lateral stability, or a more aggressive look without changing wheels. They are ideal if your wheels have a hub pilot diameter that matches or is smaller than 59.3mm and your studs are two inches or shorter. If you need professional fitment confirmation, consult a mechanic or wheel specialist to verify compatibility with your particular vehicle and tire setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers fit my wheel hub?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They have a 59.3mm center bore and fit 4-lug wheels with hub pilot diameters equal to or smaller than 59.3mm; confirm your stud length is 2\" or less.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bolts included and are they corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—16 Dacromat-coated 1\/2\"-20 bolts are included, offering significantly improved corrosion resistance over standard bolts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585029210297,"sku":"B083NYZ5P9","price":242.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-packaging-spacers_9a6b3a54-f771-442c-8656-d0db130e93a9.jpg?v=1790464119"},{"product_id":"orion-motor-tech-5x4-5-wheel-spacers-2-64-1mm-hub-set-of-4-t6-aluminum-hub-centric","title":"Orion Motor Tech 5x4.5 Wheel Spacers 2\" (64.1mm Hub) Set of 4 — T6 Aluminum, Hub-Centric","description":"\u003cp\u003e\u003cstrong\u003eOrion Motor Tech OMT 5x4.5 wheel spacers are a hub-centric, T6 aluminum 2-inch spacer kit (64.1mm center bore) sold as a set of four to safely widen your vehicle's track for improved stance and stability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese OMT wheel spacers are engineered to push each wheel outward by 2 inches while maintaining hub-centric alignment and corrosion protection. Machined from aircraft-grade T6 aluminum, the kit includes Dacromet-coated M12x1.5 bolts that resist rust far better than standard fasteners. The spacers are designed for a range of Acura and Honda models and feature rear-face slots for easier removal and reduced mount damage.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these spacers affect handling and wheel fitment?\u003c\/h3\u003e\n\u003cp\u003eAdding 2 inches of track width increases lateral stability and can change steering feel by widening the vehicle's footprint. Properly installed hub-centric spacers maintain the correct alignment to reduce vibration and keep load centered on the hub.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2\" (approx. 51 mm) per axle added track width for improved stability.\u003c\/li\u003e\n  \u003cli\u003eHub-centric 64.1mm bore aligns wheels to factory hub for smooth rotation.\u003c\/li\u003e\n  \u003cli\u003eReduces inward tyre contact with suspension components when using wider wheels.\u003c\/li\u003e\n  \u003cli\u003eMay slightly alter steering response and scrub radius—verify alignment after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are included, and why do they matter?\u003c\/h3\u003e\n\u003cp\u003eThe spacers are CNC-machined from T6 aircraft-grade aluminum for a high strength-to-weight ratio. The kit contains M12x1.5 bolts with a Dacromet coating that offers substantial corrosion resistance compared to plain steel hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 aluminum body: lightweight yet strong to minimize unsprung mass.\u003c\/li\u003e\n  \u003cli\u003eDacromet-coated bolts: enhanced rust protection for longevity.\u003c\/li\u003e\n  \u003cli\u003eHub-centric design: centers the wheel on the hub for reduced vibration.\u003c\/li\u003e\n  \u003cli\u003eRear-face slots: simplify removal and limit gasket or hub damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles are compatible with this 5x4.5, 64.1mm spacer set?\u003c\/h3\u003e\n\u003cp\u003eThis set fits a wide range of Acura and Honda models that use a 5x4.5 (5x114.3 mm) bolt pattern and 64.1mm center bore. Some models are recommended for rear axle installation only; confirm your vehicle's specs before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: Acura CL, Integra Type R, MDX, RL, RSX, TL, TSX; Honda Accord, CR-V, CR-Z, Civic, Element, Odyssey, Pilot, Prelude.\u003c\/li\u003e\n  \u003cli\u003eRear-axle only: Acura NSX (1991–2005) and Honda S2000 (2000–2008).\u003c\/li\u003e\n  \u003cli\u003eAlways check manufacturer fitment notes and wheel offset before installing.\u003c\/li\u003e\n  \u003cli\u003eNot universal—confirm bolt pattern and hub bore for your model year.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for someone with basic wheel-removal experience and standard tools. The precision-machined fit and included hardware make the process quicker, but correct torque and hub cleanliness are essential for safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools needed: jack, jack stands, torque wrench, breaker bar, socket set.\u003c\/li\u003e\n  \u003cli\u003eClean hub mating surface to ensure proper hub-centric seating.\u003c\/li\u003e\n  \u003cli\u003eTighten bolts to manufacturer torque specs and recheck after first 50–100 miles.\u003c\/li\u003e\n  \u003cli\u003eHave alignment checked after installation if track width change affects geometry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Orion Motor Tech OMT 5x4.5 wheel spacer set is intended for Honda and Acura owners who want a wider stance, improved cornering stability, or the clearance to run wider or more aggressive wheel\/tire setups. It suits DIY enthusiasts and professional installers who expect durable materials, corrosion-resistant hardware, and hub-centric accuracy. If you need spacers for a different bolt pattern or center bore, look for a kit matched to your vehicle specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these spacers hub-centric or lug-centric?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These OMT spacers are hub-centric with a 64.1mm center bore to keep the wheel centered on the hub and reduce vibration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these on both front and rear axles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most listed models accept this set on both axles, but Acura NSX and Honda S2000 require rear-axle-only use—verify your vehicle fitment first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585029308601,"sku":"B0924BHKDL","price":190.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-omt-front-packaging-spacers.jpg?v=1790464120"},{"product_id":"orion-motor-tech-truck-hub-seal-installer-kit-class-7-8-aluminum-driver-set-with-5-sizes-carry-case","title":"Orion Motor Tech Truck Hub Seal Installer Kit — Class 7\/8 Aluminum Driver Set with 5 Sizes \u0026 Carry Case","description":"\u003cp\u003e\u003cstrong\u003eOMT Truck Hub Seal Installer Kit is a complete aluminum-alloy driver set that helps you remove and reinstall axle sealing rings on Class 7 and 8 trucks without damaging bearings or drums.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis professional-grade installer kit from Orion Motor Tech brings a practical, durable solution for hub seal work on heavy-duty trucks and trailers. The set combines multiple driver sizes, extension handles, and a protective case so technicians and fleet mechanics can match seals precisely, reach confined hubs, and keep tools organized between jobs. Built with anodized aluminum alloy and laser size markings, the kit balances strength, corrosion resistance, and portability for repeated garage or field use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit prevent damage when reinstalling hub seals?\u003c\/h3\u003e\n\u003cp\u003eThe kit centers and supports the sealing ring during installation so force is distributed evenly across the seal face rather than pressing on bearings or drums. Using a correctly sized driver reduces the risk of warping or tearing the seal, which helps maintain proper hub lubrication and component life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFive driver sizes match common hub seal diameters for a secure fit\u003c\/li\u003e\n  \u003cli\u003eExtension handles provide controlled reach and leverage in tight hubs\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy construction reduces impact bounce compared to lighter materials\u003c\/li\u003e\n  \u003cli\u003eLaser-engraved sizes help select the right driver quickly to avoid trial-and-error\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this set handle different truck classes and trailer hubs?\u003c\/h3\u003e\n\u003cp\u003eYes—the Orion Motor Tech kit is specified for heavy over-the-road applications including Class 7 and Class 8 trucks, and it also fits many medium-duty and trailer hubs. The variety of driver diameters covers the most common seal dimensions encountered in heavy-duty axle service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with popular Class 7 \u0026amp; 8 truck seals and many trailer hub seals\u003c\/li\u003e\n  \u003cli\u003eFive driver heads adapt to different inner and outer seal profiles\u003c\/li\u003e\n  \u003cli\u003eDesigned to work without removing brake drums in many service scenarios\u003c\/li\u003e\n  \u003cli\u003eUseful for both fleet maintenance and one-off roadside repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the tools durable and easy to use in the field?\u003c\/h3\u003e\n\u003cp\u003eDrivers are machined from aluminum alloy with an oxidized (anodized) finish to resist corrosion while keeping weight manageable for hand use. The blow-molded plastic case secures each component and prevents loss, while laser markings ensure quick size identification even under low light.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOxidized coating resists rust and surface wear from shop solvents\u003c\/li\u003e\n  \u003cli\u003eLightweight aluminum reduces operator fatigue during repeated use\u003c\/li\u003e\n  \u003cli\u003eBlow-molded case protects tools and keeps them organized on job sites\u003c\/li\u003e\n  \u003cli\u003eLaser-engraved size labels remain readable after heavy use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the extension handles improve control and reach?\u003c\/h3\u003e\n\u003cp\u003eThe two extension handles give extra length for accessing recessed hubs and provide better leverage for evenly tapping seals into place. They let technicians work around drums and backing plates without removing large assemblies, saving time on routine installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtra reach for deep-set seals or recessed axle housings\u003c\/li\u003e\n  \u003cli\u003eImproved leverage reduces risk of uneven seating or seal distortion\u003c\/li\u003e\n  \u003cli\u003eQuick to attach and compatible with all five drivers in the set\u003c\/li\u003e\n  \u003cli\u003eUseful for confined spaces common on trailers and heavy rigs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Fleet technicians, heavy-duty truck mechanics, road-service professionals, and DIY mechanics who work on Class 7 and Class 8 trucks or trailers will find this Orion Motor Tech installer kit valuable. It’s designed to speed common hub seal jobs, protect bearings during installation, and keep a full set of durable drivers and extensions organized for repeated garage or roadside use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit seals on Class 8 tractor hubs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this Orion Motor Tech set covers the common seal sizes used on many Class 8 tractor hubs and similar heavy-duty trailers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the drivers corrosion resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the drivers are aluminum alloy with an oxidized coating to resist corrosion and stand up to shop use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Orion Motor Tech","offers":[{"title":"Default Title","offer_id":67585032487097,"sku":"B0CX9HYQWY","price":186.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/orion-motor-tech-front-packaging_c0310d08-edc9-45c7-a6be-7cfdf1f16ca9.jpg?v=1790464293"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/orion-motor-tech-omt-swivel-front-view.jpg?v=1790612508","url":"https:\/\/redleafauto.ca\/collections\/orion-motor-tech.oembed?page=4","provider":"Redleaf Auto","version":"1.0","type":"link"}