{"title":"Oxygen (O2) Sensors","description":"\u003cp\u003eUpstream and downstream oxygen sensors. The listing says which position it fits; bank 1 is the side with cylinder 1.\u003c\/p\u003e\u003cp\u003e200 products from 67 brands, including A-Premium, higherbro, Bosch and QIYBONE. Most are priced between $67 and $148 CAD.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"bosch-oxygen-lambda-sensor-0258017025-vehicle-specific-connector-ready-to-fit-oe-replacement","title":"Bosch oxygen (lambda) sensor 0258017025 — vehicle-specific connector, ready-to-fit OE replacement","description":"\u003cp\u003e\u003cstrong\u003eBosch 0258017025 is a ready-to-fit oxygen (lambda) sensor with a vehicle-specific connector that helps the engine control unit monitor exhaust oxygen and optimise the air–fuel mixture.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Bosch lambda sensor is designed as a direct-replacement part for compatible vehicles, combining Bosch’s OE-level testing and continuous development. It measures oxygen content in exhaust gases and sends voltage signals to the ECU so the engine management system can adjust fuel delivery for cleaner combustion and stable idling. The sensor comes installation-ready with a vehicle-specific connector to simplify fitment and reduce wiring conversions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Bosch lambda sensor improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe sensor provides real-time oxygen readings that the ECU uses to fine-tune the air–fuel ratio, supporting smoother running and consistent throttle response. While it does not change performance on its own, accurate feedback helps the engine operate closer to its designed efficiency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivers continuous oxygen-level data to the ECU for precise fuel metering.\u003c\/li\u003e\n  \u003cli\u003eSupports stable idling and reduced engine hesitation under load.\u003c\/li\u003e\n  \u003cli\u003eFactory-tested for OE-equivalent reliability and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this sensor easy to fit in my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe Bosch 0258017025 includes a vehicle-specific connector so it plugs into the existing wiring harness without splicing. It arrives ready-to-fit, reducing installation time and error compared with generic sensors that require adapter cables.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle-specific connector matches factory wiring for plug-and-play fitment.\u003c\/li\u003e\n  \u003cli\u003ePre-assembled wiring and connector lower installation steps and risk.\u003c\/li\u003e\n  \u003cli\u003eCompact design fits OEM mounting locations without modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is this Bosch oxygen sensor?\u003c\/h3\u003e\n\u003cp\u003eBosch applies the same functional and quality tests used for original equipment parts, ensuring the sensor withstands typical exhaust temperatures and contamination encountered in daily driving. Continuous product development keeps the design current with evolving engine systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTested to OE standards for performance and long-term stability.\u003c\/li\u003e\n  \u003cli\u003eMaterials chosen to resist heat and exhaust contaminants.\u003c\/li\u003e\n  \u003cli\u003eManufactured under Bosch quality controls and updated through ongoing R\u0026amp;D.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will I know this sensor fits my car?\u003c\/h3\u003e\n\u003cp\u003eFitment depends on make, model and year; the product is sold with a vehicle-specific connector suited to particular vehicle applications. Check compatibility lists or enter your vehicle details to confirm this part number matches your car’s requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePart number Bosch 0258017025 corresponds to specific vehicle applications.\u003c\/li\u003e\n  \u003cli\u003eConfirm fitment using VIN, year, make and model or OEM cross-reference.\u003c\/li\u003e\n  \u003cli\u003eSupplier fitment tools or dealer data can verify correct connector type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bosch 0258017025 lambda sensor is aimed at vehicle owners, independent mechanics and service shops replacing a faulty oxygen sensor with a direct-fit, OE-quality component. It suits drivers seeking an installation-ready, tested sensor with a vehicle-specific connector to minimize installation time and ensure proper electrical mating with factory wiring harnesses.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Bosch 0258017025 a direct replacement part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s a ready-to-fit, OE-tested lambda sensor with a vehicle-specific connector for direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the sensor myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If you have basic tools and access to the sensor location, installation is straightforward thanks to the vehicle-specific connector.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":67584911966393,"sku":"B00BL6M5T6","price":184.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bosch-lambda-sensor-front-view.jpg?v=1790458749"},{"product_id":"dngbymx-upstream-nox-sensor-for-2013-2018-dodge-ram-6-7l-cummins-direct-fit-oem-equivalent","title":"Dngbymx Upstream NOx Sensor for 2013–2018 Dodge Ram 6.7L Cummins — Direct-Fit, OEM-Equivalent","description":"\u003cstrong\u003eUpstream NOx Sensor for 2013–2018 Dodge Ram 2500\/3500\/4500\/5500 (6.7L Cummins) — a direct-fit replacement that restores NOx monitoring and resolves common fault codes.\u003c\/strong\u003e\n\n\u003cp\u003eIf your 6.7L Cummins-equipped Dodge Ram is showing emissions-related fault codes, poor fuel-management messages, or a persistent check-engine light, a worn upstream NOx (nitrogen oxide) sensor is a frequent culprit. This Dngbymx upstream NOx sensor is engineered to match fitment and performance for 2013–2018 Ram 2500, 3500, 4500, and 5500 trucks, offering an affordable, tested alternative to OEM units.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this upstream NOx sensor affect my truck’s emissions monitoring?\u003c\/h3\u003e\n\u003cp\u003eThe upstream NOx sensor measures oxide levels in exhaust gases before aftertreatment, feeding data to the ECU for emissions control and regeneration strategies. Replacing a failing sensor restores accurate readings so the engine and emissions systems can operate within designed parameters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonitors NOx levels before the SCR catalyst for precise feedback.\u003c\/li\u003e\n  \u003cli\u003eHelps prevent incorrect regeneration cycles and limp-home modes.\u003c\/li\u003e\n  \u003cli\u003eReduces false diagnostic trouble codes related to NOx sensing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers is this sensor compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis upstream NOx sensor is built for 6.7L Cummins diesel models from 2013 through 2018 and fits heavy-duty Ram trucks listed in the title. It is offered as a replacement for a range of OEM references so you can match by part number during diagnosis.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Dodge Ram 2500, 3500, 4500, 5500 with 6.7L Cummins (2013–2018).\u003c\/li\u003e\n  \u003cli\u003eReplaces: 68210084AA, 904-6011, 904-6030, 5WK9, 6742B, 5WK96742, 5WK96742B.\u003c\/li\u003e\n  \u003cli\u003eOther cross-refs: 4326873, 2872948, A0415S170 for easier parts matching.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat causes NOx sensors to fail and how does this unit address those problems?\u003c\/h3\u003e\n\u003cp\u003eNOx sensors endure harsh exhaust conditions—soot, moisture, and mechanical stress can degrade sensing elements and wiring. The Dngbymx sensor uses durable materials and factory testing to resist common failure modes and help restore reliable emissions readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoot buildup and contamination are common failure triggers—this unit is designed for easy cleaning and reliable response.\u003c\/li\u003e\n  \u003cli\u003eSealed connectors and protective sheathing minimize water intrusion and cable wear.\u003c\/li\u003e\n  \u003cli\u003ePre-shipment material and vehicle tests aim to ensure consistent performance on installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect during replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic under-hood and exhaust work: remove the old upstream sensor and install this direct-fit replacement in the same location. No special tuning or programming is typically required; clear the codes after replacement and verify proper system operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement—no modifications or custom adapters needed.\u003c\/li\u003e\n  \u003cli\u003eTypical tools: appropriate socket\/oxygen sensor wrench and anti-seize for threads.\u003c\/li\u003e\n  \u003cli\u003eIf a code persists, check wiring harness and connector for damage before replacing again.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This upstream NOx sensor suits owners, mechanics, and fleet managers who need a reliable, cost-effective replacement for emissions monitoring on 2013–2018 Dodge Ram trucks with the 6.7L Cummins. It’s aimed at those troubleshooting NOx-related fault codes, restoring proper emissions system feedback, or performing routine maintenance on high-mileage diesels. For pre- and post-sale support, Dngbymx offers direct customer communication to help confirm fitment and answer installation questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor fit my 2015 Ram 3500 6.7L Cummins?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Dngbymx upstream NOx sensor is compatible with 2013–2018 Ram 3500 6.7L Cummins models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to program the vehicle after installing this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: In most cases no programming is required; clear fault codes after replacement and verify system operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dngbymx","offers":[{"title":"Default Title","offer_id":67585065877689,"sku":"B0BFDKPGY7","price":267.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dngbymx-front-view-upstream-nox-sensor.jpg?v=1790465844"},{"product_id":"denso-air-fuel-ratio-sensor-234-9049-wide-band-4-wire-direct-fit-for-lexus-scion-toyota","title":"Denso Air\/Fuel Ratio Sensor 234-9049 Wide-Band 4-Wire Direct-Fit for Lexus\/Scion\/Toyota","description":"\u003cp\u003e\u003cstrong\u003eDenso 234-9049 is a direct-fit wide-band air\/fuel ratio sensor engineered to replace the original unit on select Lexus, Scion and Toyota vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis OEM-grade sensor measures the proportion of air to fuel entering the engine and communicates that data to the engine control unit so fuel delivery stays optimized. Manufactured and tested to Denso's strict specifications, the 234-9049 comes with a 4-wire harness (20.08 inches) and is built for a first-time fit in the listed model years. It’s designed to help maintain fuel efficiency, support stable combustion across RPMs, and protect emissions system components like the catalytic converter when installed correctly.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this sensor affect my vehicle’s fuel efficiency?\u003c\/h3\u003e\n\u003cp\u003eBy providing precise, wide-band air\/fuel readings, the sensor helps the engine computer adjust injector pulses to keep the mixture near the target ratio. That reduces wasted fuel from overly rich or lean conditions and can improve mileage consistency under varied driving loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWide-band sensing for accurate mixture data across RPM ranges\u003c\/li\u003e\n  \u003cli\u003eDirect OE-style replacement minimizes tuning errors\u003c\/li\u003e\n  \u003cli\u003eConsistent signal reduces corrective fuel trims that waste fuel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Lexus, Scion, or Toyota model?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is specific to the model years listed for the Denso 234-9049; verify against your vehicle’s year and engine application before ordering. The product is intended as a like-for-like replacement for the vehicles noted, matching connector type and wiring length to avoid splicing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits select Lexus ES350, RX350 and RX450h model years\u003c\/li\u003e\n  \u003cli\u003eFits Scion tC and xB model years listed in the product details\u003c\/li\u003e\n  \u003cli\u003eFits various Toyota Avalon, Camry, Highlander, RAV4, Sienna and Solara years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical and electrical details I should know?\u003c\/h3\u003e\n\u003cp\u003eThe sensor is a four-wire wide-band device with a 20.08-inch harness designed to match original equipment interfaces. Package dimensions and weight are compact, and the component is manufactured in the United States to Denso’s OE-quality standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4-wire wide-band design for precise ratio monitoring\u003c\/li\u003e\n  \u003cli\u003eWiring harness length: 20.08 inches for proper reach\u003c\/li\u003e\n  \u003cli\u003eCompact packaging: 4.9 x 15.1 x 5.1 cm, weight ~0.128 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this sensor impact emissions system longevity?\u003c\/h3\u003e\n\u003cp\u003eAccurate air\/fuel data keeps combustion balanced, which reduces unburned hydrocarbons and minimizes stress on the catalytic converter. While sensor replacement alone won’t cure all emissions issues, restoring precise mixture control helps the entire emissions system operate as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps maintain optimum combustion to lower harmful byproducts\u003c\/li\u003e\n  \u003cli\u003eReduces risk of catalyst-overload from prolonged rich running\u003c\/li\u003e\n  \u003cli\u003eProvides stable signals that prevent long-term corrective fuel trims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and independent technicians who need a dependable OE-style replacement air\/fuel ratio sensor for compatible Lexus, Scion and Toyota vehicles. It’s especially suited for owners aiming to restore factory fuel economy and emissions performance without aftermarket calibration. Confirm your vehicle’s year and engine compatibility before purchase to ensure a correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Denso 234-9049 come with a wiring harness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it includes a 4-wire wiring harness approximately 20.08 inches long to match OE routing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this sensor on any year Camry?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this part fits specific Camry years listed; confirm compatibility with your exact model year.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":67585080295609,"sku":"B003YNHE86","price":273.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/denso-234-9049-front-view.jpg?v=1790466426"},{"product_id":"denso-air-fuel-ratio-sensor-234-5010-wide-band-direct-fit-with-oe-style-harness-for-acura-honda-saturn","title":"Denso Air\/Fuel Ratio Sensor 234-5010 — Wide-Band Direct-Fit with OE-Style Harness for Acura Honda Saturn","description":"\u003cp\u003e\u003cstrong\u003eDenso 234-5010 is a direct-fit wide-band air\/fuel ratio sensor designed to restore accurate fuel trim control for specified Acura, Honda and Saturn models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Denso sensor replaces the factory unit with a precision-built wide-band element and factory-style harness to deliver rapid, repeatable oxygen sensing across the RPM range. Built and tested to OE standards, the 234-5010 helps the engine control module maintain optimal air\/fuel mixture for smoother running, more consistent fuel economy, and reduced emissions when compared to a failing sensor. Below you'll find clear answers to common buyer questions about compatibility, performance and installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this Denso 234-5010 sensor fit?\u003c\/h3\u003e\n\n\u003cp\u003eThe 234-5010 is matched to specific Acura, Honda and Saturn models from the mid-2000s. It is a direct replacement for the original equipment sensor on the listed vehicles and uses the same connector and wiring length to simplify installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAcura: 2003–2006 MDX, 2005–2008 RL, 2004–2008 TL\u003c\/li\u003e\n  \u003cli\u003eHonda: 2003–2007 Accord, 2005–2006 Odyssey, 2005–2008 Pilot, 2006–2008 Ridgeline\u003c\/li\u003e\n  \u003cli\u003eSaturn: 2004–2007 Vue\u003c\/li\u003e\n  \u003cli\u003eParts interchange numbers: 12581687, 12581688, 36531RCAA02, 36531RCAA01, 36531RDV004, 36531RDJA01, 36531RDMA01\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this wide-band sensor affect engine performance?\u003c\/h3\u003e\n\n\u003cp\u003eA wide-band air\/fuel ratio sensor gives the engine control unit a detailed, continuous reading of oxygen levels rather than a simple rich\/lean toggle. That lets the ECU adjust fuel delivery precisely through the rev range, improving drivability and helping maintain catalytic converter health when functioning correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMeasures air\/fuel ratios roughly from 12:1 to 19:1 for precise tuning\u003c\/li\u003e\n  \u003cli\u003eQuick-response planar zirconia element picks up oxygen changes rapidly\u003c\/li\u003e\n  \u003cli\u003eTarnish-proof platinum electrodes extend sensor life and stability\u003c\/li\u003e\n  \u003cli\u003eHelps the ECU refine fuel trims for steadier idle and throttle response\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical and electrical features I should know about?\u003c\/h3\u003e\n\n\u003cp\u003eThe 234-5010 comes with an 11.50-inch four-wire harness and is sized to match the OE unit for a first-time fit. Materials and construction focus on durability and consistent output so the sensor provides reliable data under normal operating conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFour-wire wide-band design with an 11.50\" wiring harness for direct connection\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions: approximately 5.75 x 2.19 x 1.88 inches; weight ~0.25 lb\u003c\/li\u003e\n  \u003cli\u003ePrecision-manufactured for OE-style fitment and connector compatibility\u003c\/li\u003e\n  \u003cli\u003eSupplied as a single unit (package quantity: 1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and are there tips for a reliable replacement?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is generally straightforward when replacing the same sensor type on compatible vehicles because Denso matches the OE connector and harness length. Use anti-seize sparingly on the threads if recommended, ensure the vehicle is cool, and clear any stored trouble codes after installation to allow the ECU to re-learn trims.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplace when engine is cool and follow OEM torque specs for the sensor\u003c\/li\u003e\n  \u003cli\u003eMinimal wiring modification typically required due to OE-style connector\u003c\/li\u003e\n  \u003cli\u003eClear diagnostic trouble codes after install and perform a short drive cycle\u003c\/li\u003e\n  \u003cli\u003eVerify compatibility with vehicle year\/model before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Denso 234-5010 is intended for owners or technicians servicing mid-2000s Acura, Honda, and Saturn vehicles who need a reliable, OE-quality wide-band air\/fuel ratio sensor. It suits anyone restoring proper fuel trim behavior, replacing a failed sensor, or maintaining emissions and fuel-efficiency performance with a direct-fit, manufacturer-tested component.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 234-5010 fit my 2005 Honda Pilot?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Denso 234-5010 is a direct-fit replacement for 2005–2008 Honda Pilot models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required beyond a sensor socket and basic hand tools; follow torque specs and ensure the engine is cool.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":67585088585913,"sku":"B00199DZT4","price":262.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/denso-234-5010-front-view.jpg?v=1790466849"},{"product_id":"denso-oxygen-air-fuel-sensor-234-9005-direct-fit-for-2001-2005-honda-civic-fast-response","title":"Denso Oxygen (Air\/Fuel) Sensor 234-9005 — Direct-Fit for 2001–2005 Honda Civic, Fast Response","description":"\u003cp\u003e\u003cstrong\u003eThe Denso 234-9005 is a direct-replacement air\/fuel ratio (oxygen) sensor engineered to restore accurate air–fuel monitoring and ensure correct engine management for specified Honda and Acura models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement sensor from Denso is built to the rigorous standards of original-equipment manufacturers, offering a precision fit and calibration that helps vehicles read air\/fuel ratios reliably across driving conditions. Designed for 2001–2005 Honda Civics, 2002–2004 Honda CR-Vs, and 2002–2004 Acura RSXs, the 234-9005 aims to match the original sensor’s performance so engine control modules receive the data they expect without modifications or reprogramming.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Denso 234-9005 improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eBy delivering accurate air\/fuel ratio readings to the engine control unit, this sensor helps the vehicle maintain the intended combustion balance across idle, cruise, and acceleration. Correct measurements help the ECU adjust injector timing and fuel delivery for smoother operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-built sensing element for consistent signal output\u003c\/li\u003e\n  \u003cli\u003eFast response time to changing throttle and load conditions\u003c\/li\u003e\n  \u003cli\u003eHelps maintain optimal combustion across RPM ranges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my vehicle and install easily?\u003c\/h3\u003e\n\u003cp\u003eDenso designs the 234-9005 as a first-time-fit replacement for the listed model years, matching OEM connectors and thread sizes. Installation is typically straightforward for any technician familiar with oxygen sensor replacement; many enthusiasts can perform the swap with basic tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit connector and thread—no splicing required\u003c\/li\u003e\n  \u003cli\u003eCompatible with Honda Civic (2001–2005), CR-V (2002–2004), Acura RSX (2002–2004)\u003c\/li\u003e\n  \u003cli\u003eCompact design for access in common engine layouts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and reliability features does this sensor offer?\u003c\/h3\u003e\n\u003cp\u003eDenso uses robust materials and manufacturing controls to replicate OE longevity and performance under heat, vibration, and exhaust contaminants. The sensor’s construction aims to resist common failure modes so it can deliver a stable signal over many miles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable housing and protective shielding against exhaust conditions\u003c\/li\u003e\n  \u003cli\u003eEngineered to resist contamination and thermal cycling\u003c\/li\u003e\n  \u003cli\u003eTested to meet strict OE performance and quality benchmarks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing a worn sensor affect fuel economy and emissions?\u003c\/h3\u003e\n\u003cp\u003eA functioning air\/fuel ratio sensor supports accurate fuel metering; when the sensor is out of spec, the engine may run rich or lean and burn more fuel. Installing a reliable sensor helps the ECU return to intended fueling strategies, which can reduce excess consumption and support emissions control systems like the catalytic converter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps restore proper fuel trim and injector timing\u003c\/li\u003e\n  \u003cli\u003eCan reduce unnecessary fuel consumption caused by incorrect readings\u003c\/li\u003e\n  \u003cli\u003eSupports catalytic converter longevity by maintaining balanced mixtures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Denso 234-9005 is aimed at vehicle owners, DIY mechanics, and repair shops seeking a dependable, OEM-quality replacement oxygen\/air–fuel ratio sensor for compatible Honda Civics, CR-Vs, and Acura RSXs. If your check engine light indicates an O2 or AFR sensor fault, or if you need to replace a sensor that’s slow or contaminated, this Denso unit provides a precision-fit option designed to meet original equipment standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Denso 234-9005 a direct fit for my Honda Civic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 234-9005 fits Honda Civic model years 2001–2005 as a direct-replacement oxygen\/air–fuel ratio sensor.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need special tools to install this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required beyond common hand tools and an oxygen sensor socket for easiest removal and installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":67585123221689,"sku":"B000C5UFVM","price":344.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/denso-234-9005-front-view.jpg?v=1790467980"},{"product_id":"bw-sr-x2v-o2-sensor-4oxv-oem-compatible-replacement-for-gasalert-microclip-xl-xt-restores-accurate-oxygen-readings","title":"BW SR-X2V O2 Sensor (4OXV) — OEM-compatible replacement for GasAlert MicroClip XL\/XT, restores accurate oxygen readings","description":"\u003cp\u003e\u003cstrong\u003eThe BW SR-X2V (4OXV) is a replacement oxygen (O2) sensor designed for BW\/CiTiceL-equipped portable gas detectors to reliably monitor ambient oxygen levels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis original-equipment compatible sensor fits a range of BW portable monitors and is intended for technicians, safety managers, and maintenance teams who need a quick, accurate swap-out for aged or depleted oxygen sensing elements. It’s manufactured to the specifications used in BW and CiTiceL sensors and is offered as a brand-new module. Note: the sensor cap or body color may vary by gas sensor type or production changes; the product image is illustrative.\u003c\/p\u003e\n\n\u003ch3\u003eWhich devices does the SR-X2V replace or fit?\u003c\/h3\u003e\n\u003cp\u003eThe SR-X2V oxygen sensor is engineered to work with specific BW and CiTiceL portable detectors, offering a straightforward replacement path for compatible models. Confirm compatibility against your instrument's manual or part number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon installs: GasAlert MicroClip XL and GasAlert MicroClip XT\u003c\/li\u003e\n  \u003cli\u003eAlso used in some GasAlertMax and GasAlertMax XT II configurations\u003c\/li\u003e\n  \u003cli\u003eCross-references: check your detector’s sensor part listing for SR-series oxygen sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this sensor affect detector performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or expired oxygen sensor with an SR-X2V restores the detector’s ability to sense oxygen within its designed range, keeping alarm thresholds responsive and readings stable. It does not change the instrument’s calibration requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores accurate O2 measurement and alarm activation\u003c\/li\u003e\n  \u003cli\u003eMaintains expected response time for oxygen events\u003c\/li\u003e\n  \u003cli\u003eRequires usual calibration and bump-testing after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a simple in-field swap, but always follow the detector manufacturer’s service instructions. After fitting the new sensor, run a bump test and, if necessary, perform calibration to confirm correct operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePower down device before sensor replacement\u003c\/li\u003e\n  \u003cli\u003eObserve polarity and connector alignment when seating sensor\u003c\/li\u003e\n  \u003cli\u003ePerform functional checks: bump test and calibration as recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any special ordering or product notes?\u003c\/h3\u003e\n\u003cp\u003eInternational versions of detectors and sensors can differ in labeling, fit, or documentation; check regional compatibility. The pictured graphic is for reference only—actual sensor cap or body colors may change with manufacturing updates or different gas types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSold new; verify part number SR-X2V \/ 4OXV before purchase\u003c\/li\u003e\n  \u003cli\u003eMay have different packaging or instructions for international sales\u003c\/li\u003e\n  \u003cli\u003eKeep supply records for maintenance logs and replacement schedules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: procurement and safety professionals, field technicians, and maintenance staff responsible for the ongoing operation of BW and CiTiceL portable gas detection fleets. If you manage detectors in industrial, confined-space, or general safety programs and need a factory-spec oxygen sensing element replacement, the SR-X2V provides a direct option to maintain operational readiness.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the SR-X2V compatible with my GasAlert MicroClip?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the SR-X2V commonly fits GasAlert MicroClip XL and XT models, but check your detector’s sensor part list to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to recalibrate after replacing the sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You should perform a bump test and recalibrate if recommended by the detector manual to ensure accurate readings and alarm function.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BW","offers":[{"title":"Default Title","offer_id":67585161527481,"sku":"B00MX5ZC3A","price":163.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bw-sr-x2v-front.jpg?v=1790469168"},{"product_id":"kvzkvz-16916-oxygen-sensor-replacement-for-robinair-ac1234-4-ip67-high-sensitivity-o2-accuracy","title":"KVZKVZ 16916 Oxygen Sensor Replacement for Robinair AC1234-4 — IP67, High-Sensitivity O2 Accuracy","description":"\u003cp\u003e\u003cstrong\u003eKVZKVZ 16916 oxygen sensor replacement restores accurate O2 readings for Robinair R-1234YF refrigerant identifiers, reducing false errors and extending instrument uptime.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Robinair AC1234 series refrigerant identifier is showing error messages like \"Replace ID O2 Sensor Soon\" or \"Analyzer Error 6,\" the KVZKVZ 16916 oxygen sensor is a direct-fit replacement designed for those models. This sensor uses a highly sensitive electrode array and an IP67-rated interface to resist corrosion and moisture found in typical vehicle and HVAC workshop environments. That combination helps maintain identification accuracy and reduces downtime due to sensor failure.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this sensor affect refrigerant identification accuracy?\u003c\/h3\u003e\n\n\u003cp\u003eThe KVZKVZ 16916 sensor improves the stability of oxygen measurements by controlling concentration error within 0.2%, which helps the refrigerant identifier differentiate R-1234yf from contaminants and mixed blends. More consistent O2 data reduces false positives and missed identifies during routine checks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-sensitivity electrodes for finer oxygen detection\u003c\/li\u003e\n  \u003cli\u003eSpecified concentration error control: within 0.2%\u003c\/li\u003e\n  \u003cli\u003eReduces misidentification of refrigerant blends and contaminants\u003c\/li\u003e\n  \u003cli\u003eIncreases effective identifier uptime by reducing sensor-related downtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Robinair models is the 16916 sensor compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThis replacement is made to fit multiple Robinair AC1234 and R-1234YF platform variants used for refrigerant identification and recovery. It is compatible with AC1234-4, AC1234-4SL, AC1234-4-230, AC1234-6, AC1234-9 and works with the Robinair R-1234YF machine as well as 16990\/16995 refrigerant identifiers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit for AC1234-4, AC1234-4SL, AC1234-4-230, AC1234-6, AC1234-9\u003c\/li\u003e\n  \u003cli\u003eSuitable for R-1234YF refrigerant identifier series\u003c\/li\u003e\n  \u003cli\u003eCompatible with 16990 and 16995 Robinair refrigerant identifiers\u003c\/li\u003e\n  \u003cli\u003eNo major modifications required for standard installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and protection features extend the sensor's service life?\u003c\/h3\u003e\n\n\u003cp\u003eThe KVZKVZ 16916 sensor uses an upgraded interface rated IP67 to guard against dust and short-term immersion, and materials chosen to resist corrosion from refrigerants and workshop chemicals. Those design choices let the sensor operate reliably in both dry and humid settings, lowering replacement frequency.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP67-rated interface for dust and moisture resistance\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials at the connector and housing\u003c\/li\u003e\n  \u003cli\u003eRobust electrode design to withstand routine workshop conditions\u003c\/li\u003e\n  \u003cli\u003eLonger service life under normal operating cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace the sensor and how will I know?\u003c\/h3\u003e\n\n\u003cp\u003eReplace the 16916 oxygen sensor when your Robinair display shows warnings like \"Replace ID O2 Sensor Soon\" or \"Analyzer Error 6,\" when the unit can’t identify refrigerant, or when recovery\/identification cycles reach the instrument’s upper limits. Replacing the sensor promptly prevents misidentification and helps maintain diagnostic accuracy.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplace on \"Replace ID O2 Sensor Soon\" or \"Analyzer Error 6\" alerts\u003c\/li\u003e\n  \u003cli\u003eChange if refrigerant identification or recovery fails repeatedly\u003c\/li\u003e\n  \u003cli\u003eSwap at recommended service intervals or after extended use\u003c\/li\u003e\n  \u003cli\u003eFollow your instrument manual for proper replacement steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The KVZKVZ 16916 oxygen sensor replacement is designed for automotive technicians, HVAC professionals, and shop owners who use Robinair AC1234 and R-1234YF refrigerant identifiers and need a reliable, corrosion-resistant O2 sensor that restores accurate readings. It is also suitable for service shops that want to reduce instrument downtime and limit false error messages during refrigerant analysis. KVZKVZ provides one year of after-sales support and a customer response window to help with installation questions or troubleshooting.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the KVZKVZ 16916 sensor a direct replacement for Robinair R-1234YF?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits AC1234-4, AC1234-4SL, AC1234-4-230, AC1234-6, AC1234-9 and works with R-1234YF and 16990\/16995 identifiers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What protection does the sensor have against moisture and corrosion?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The sensor uses an IP67-rated interface and corrosion-resistant materials to perform reliably in humid and corrosive workshop environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KVZKVZ","offers":[{"title":"Default Title","offer_id":67585192493241,"sku":"B0F43Y6XYR","price":242.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kvzkvz-16916-front-view.jpg?v=1790469564"},{"product_id":"bosch-wideband-oxygen-sensor-17025-direct-fit-a-f-sensor-high-temp-durable","title":"Bosch Wideband Oxygen Sensor 17025 — Direct-Fit A\/F Sensor, High-Temp Durable","description":"\u003cp\u003e\u003cstrong\u003eThe BOSCH 17025 is a direct-fit premium wideband oxygen (A\/F) sensor engineered to deliver precise air\/fuel readings for aftermarket high-performance and tuning applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned and manufactured by Bosch, the 17025 wideband O2 sensor offers a more detailed air\/fuel measurement than a basic rich\/lean oxygen sensor. It integrates an advanced sensing element, OE-style connectors, and a rugged housing to withstand high-temperature exhaust environments. This product suits tuners, performance shops, and enthusiasts who need accurate real-time A\/F data for engine calibration and monitoring.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the BOSCH 17025 improve air\/fuel tuning accuracy?\u003c\/h3\u003e\n\u003cp\u003eThe 17025 uses a wideband sensing element that reports an exact air\/fuel ratio rather than a binary rich-or-lean signal. This finer resolution helps tuning tools and engine management systems make precise fueling adjustments, improving tuning repeatability and data logging fidelity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWideband sensing element provides continuous A\/F values, not just rich\/lean.\u003c\/li\u003e\n  \u003cli\u003eCompatible with aftermarket wideband controllers and tuners for real-time feedback.\u003c\/li\u003e\n  \u003cli\u003eReduces guesswork when dialing fuel maps or diagnosing fueling issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the sensor durable for performance exhaust conditions?\u003c\/h3\u003e\n\u003cp\u003eBosch engineered the 17025 with a reinforced housing and a seared protection tube that’s checked during a 100% functional quality test. Those design choices reduce wear from combustion byproducts and thermal cycling, extending service life under high-heat, high-stress conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust sensor design resists contamination and thermal stress.\u003c\/li\u003e\n  \u003cli\u003eSeared protection tube improves mechanical protection and longevity.\u003c\/li\u003e\n  \u003cli\u003eFactory-tested to ensure each unit meets performance standards before shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the BOSCH 17025 easy to install in my vehicle or kit?\u003c\/h3\u003e\n\u003cp\u003eThe 17025 arrives as a true direct-fit component with OE-style connectors and a pre-coated thread that includes anti-seize compound. That reduces installation fuss and prevents thread galling, making it straightforward to mount in existing wideband kits or direct-fit locations where applicable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrue OE connectors match factory harnesses and aftermarket controllers.\u003c\/li\u003e\n  \u003cli\u003eThreads pre-coated with anti-seize for clean, repeatable installs.\u003c\/li\u003e\n  \u003cli\u003eWorks with common wideband kits and many performance setups requiring precise A\/F data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich signals and systems is this sensor intended for?\u003c\/h3\u003e\n\u003cp\u003eThis wideband sensor supplies the high-resolution air\/fuel data needed by aftermarket controllers, standalone ECUs, and datalogging devices. It’s built for performance applications where exact A\/F measurement is necessary rather than coarse open\/closed-loop indication.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFeeds aftermarket wideband controllers and tuners with precise A\/F outputs.\u003c\/li\u003e\n  \u003cli\u003eIdeal for standalone ECUs and performance datalogging systems.\u003c\/li\u003e\n  \u003cli\u003eNot a simple lean\/rich switch—engineers use it for calibration and diagnostics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The BOSCH 17025 wideband oxygen sensor is aimed at mechanics, tuning shops, motorsport teams, and car enthusiasts who require accurate, reliable air\/fuel data during calibration, dyno sessions, or on-track monitoring. If you’re installing or upgrading a wideband system and need OEM-style fitment, robust construction, and precise A\/F feedback, this sensor is built to meet those needs without unnecessary complexity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the BOSCH 17025 work with my aftermarket wideband controller?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 17025 is designed for aftermarket wideband systems and provides the precise A\/F signal those controllers require.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the sensor come ready to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it has OE-style connectors and threads pre-coated with anti-seize for straightforward, reliable installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":67585444020409,"sku":"B009J3EXGQ","price":192.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bosch-17025-front-view.jpg?v=1790470302"},{"product_id":"zxyculture-oxygen-sensor-for-infiniti-jx35-nissan-pathfinder-2013-2014-direct-fit-3-5l-v6-oe-matching","title":"Zxyculture Oxygen Sensor for Infiniti JX35 \u0026 Nissan Pathfinder 2013-2014 — Direct-Fit 3.5L V6, OE-Matching","description":"\u003cp\u003e\u003cstrong\u003eZxyculture oxygen sensor for Infiniti JX35 and Nissan Pathfinder (2013–2014) is a direct-fit replacement sensor engineered to restore accurate exhaust monitoring and help your engine management system optimize combustion.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aftermarket replacement oxygen sensor is built for 3.5L V6 models from Infiniti and Nissan listed below. It matches common OE part numbers and is intended to plug into the original wiring and mounting locations, simplifying installation while providing consistent signal feedback to the vehicle’s ECU. The unit is constructed with corrosion-resistant materials and reinforced components to withstand heat and vibration in the engine bay.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oxygen sensor improve my vehicle’s engine monitoring?\u003c\/h3\u003e\n\u003cp\u003eThe sensor measures oxygen in exhaust gases and sends voltage signals to the engine control unit so air–fuel mixture adjustments can be made. A properly functioning sensor helps the ECU maintain more consistent combustion conditions and can reduce irregular running due to inaccurate readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides steady voltage feedback to the ECU for accurate air–fuel adjustments\u003c\/li\u003e\n  \u003cli\u003eEngineered to match OE signal characteristics for compatibility\u003c\/li\u003e\n  \u003cli\u003eHelps reduce long-term drivability issues caused by faulty oxygen readings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich models and part numbers is this sensor compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis sensor is specified for Infiniti and Nissan 3.5L V6 applications from the 2013–2014 model years. It is offered to match many original equipment numbers; always cross-check the part number on your old sensor before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Infiniti JX35 (2013) and QX60 (2014) 3.5L V6\u003c\/li\u003e\n  \u003cli\u003eCompatible with Nissan Pathfinder (2013–2014), Altima Sedan (2013–2014), Quest (2014) 3.5L V6\u003c\/li\u003e\n  \u003cli\u003eMatches OE references such as 234-9135, 234-4595, 234-4599, 19316342 and related numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe part is designed for high plug-and-play compatibility with the listed vehicles, which typically keeps installation time and effort low. Most DIYers with basic tools can replace the sensor by unplugging the old unit and swapping in the new one; however, use proper torque for the sensor bung and follow safety precautions for hot exhaust components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design to fit original mounting location and connector\u003c\/li\u003e\n  \u003cli\u003eReinforced thread and sealing to resist exhaust leaks when installed properly\u003c\/li\u003e\n  \u003cli\u003eRecommended: anti-seize on threads, correct torque, and verify connector seating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and durability features does this sensor offer?\u003c\/h3\u003e\n\u003cp\u003eThe sensor is manufactured using corrosion-resistant materials and a reinforced assembly intended to handle typical engine bay heat and vibration. These build choices aim to extend service life compared with generic, unprotected units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant housing to withstand exhaust environment\u003c\/li\u003e\n  \u003cli\u003eReinforced internals for vibration resistance and stable signal output\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain accurate readings under repeated thermal cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Zxyculture oxygen sensor is aimed at owners and mechanics of Infiniti JX35, QX60 and Nissan Pathfinder, Altima, or Quest 3.5L V6 vehicles from the 2013–2014 model years who need a reliable, direct-fit replacement. It suits DIY installers and professional shops that require a part matching common OE numbers and built for durability in high-heat exhaust conditions. Always confirm your vehicle’s original part number and connector type before ordering to ensure proper fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this oxygen sensor fit my 2013 Nissan Pathfinder 3.5L V6?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s listed for the 2013–2014 Pathfinder 3.5L V6 but confirm your old part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required beyond standard hand tools; use an oxygen-sensor socket and correct torque.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Zxyculture","offers":[{"title":"Default Title","offer_id":67585450180793,"sku":"B0FNR99YB6","price":167.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/zxyculture-front-view-sensor.jpg?v=1790470660"},{"product_id":"bosch-oxygen-sensor-direct-fit-single-oe-replacement-fast-heating-stainless-steel","title":"Bosch Oxygen Sensor Direct-Fit Single — OE Replacement, Fast-Heating Stainless-Steel","description":"\u003cb\u003eThe BOSCH 17014 Premium Original Equipment Oxygen Sensor is a direct-fit replacement oxygen sensor engineered to restore accurate air-fuel feedback and reliable emissions performance.\u003c\/b\u003e\n\n\u003cp\u003eBuilt from Bosch's decades of sensor development, this single oxygen sensor uses a double laser-welded stainless steel housing, a fast-acting heater element, and factory-tested components so it reaches operating temperature quickly and resists exhaust wear. It ships ready to install with OE-style connectors and anti-seize-coated threads to simplify replacement and reduce the chance of installation damage.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor affect my vehicle's performance?\u003c\/h3\u003e\n\u003cp\u003eAn oxygen sensor provides critical feedback to the engine control unit so the engine maintains the correct air-fuel ratio. Replacing a worn or failing sensor helps stabilize idle, improves throttle response, and supports proper fuel economy without altering engine calibrations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores accurate oxygen readings for better combustion control\u003c\/li\u003e\n  \u003cli\u003eHelps reduce rough idle and hesitation caused by incorrect fuel trims\u003c\/li\u003e\n  \u003cli\u003eSupports fuel-efficiency by enabling correct injector timing and duration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat design features make the BOSCH 17014 durable?\u003c\/h3\u003e\n\u003cp\u003eThis Bosch sensor is engineered for longevity through a sealed stainless steel body and robust welds that protect internal components from corrosive exhaust gases. The protective tube shows signs of factory testing, indicating each unit was fully evaluated before leaving the factory.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble laser-welded stainless-steel housing for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eFully submersible and sealed design to guard against exhaust contamination\u003c\/li\u003e\n  \u003cli\u003eFactory testing visible in protection tube appearance confirms functionality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the fast-acting heater improve operation?\u003c\/h3\u003e\n\u003cp\u003eThe integrated heater brings the sensing element up to its working temperature in seconds, which shortens warm-up time and provides accurate oxygen readings sooner after startup. This is especially useful for modern engines and during cold-weather operation when prompt sensor response is important.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick warm-up reduces time the ECU runs on open-loop fueling\u003c\/li\u003e\n  \u003cli\u003eCompatible with planar and 3-, 4-, and 5-wire thimble-type sensor circuits\u003c\/li\u003e\n  \u003cli\u003eImproves emissions control during short trips and cold starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eBosch supplies true direct-fit connectors and harnesses with threads pre-coated in anti-seize, making installation easier and lowering the risk of thread damage during service. Still, confirm vehicle compatibility and sensor position with your fitment guide before purchase for a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-style plug and harness for plug-and-play replacement\u003c\/li\u003e\n  \u003cli\u003eThreads pre-coated with anti-seize to protect against galling\u003c\/li\u003e\n  \u003cli\u003eVerify vehicle year, make, engine, and sensor position before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BOSCH 17014 is aimed at owners and technicians who want a high-quality, direct-fit oxygen sensor that matches original-equipment standards. It suits drivers seeking durable, factory-tested replacement parts for affected vehicles — including select Rolls-Royce Phantom models listed by fitment — and anyone wanting to maintain emissions control, drivability, and fuel efficiency without aftermarket calibration changes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the BOSCH 17014 fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check vehicle year, make, engine, and sensor position against the fitment guide; fitment can vary by engine.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need anti-seize before installing this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—threads come pre-coated with anti-seize, so additional compound is typically unnecessary.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":67585511981241,"sku":"B000BZI4ZW","price":176.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bosch-17014-front-view.jpg?v=1790471983"},{"product_id":"denso-oxygen-o2-sensor-234-4168-for-lexus-scion-toyota-4-wire-13-8in-lead-oe-fit","title":"Denso Oxygen O2 Sensor 234-4168 for Lexus\/Scion\/Toyota — 4‑Wire 13.8in Lead, OE Fit","description":"\u003cp\u003e\u003cstrong\u003eDenso 234-4168 is a direct-replacement narrow-band oxygen (O2) sensor engineered to restore precise air-fuel feedback on specified Lexus, Scion and Toyota models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Denso sensor is built to match original equipment specifications so the engine control unit receives accurate exhaust oxygen readings. The part includes a four-wire harness with a 13.78-inch length to plug into factory connectors without splicing. Denso designs and tests its oxygen sensors with layers and materials intended to resist common contaminants, helping maintain stable sensor response and service life under normal driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles is this Denso O2 sensor compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis sensor fits a defined list of Lexus, Scion and Toyota vehicles. Verify your vehicle’s model year and factory part location against fitment before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLexus RX330: 2004–2006\u003c\/li\u003e\n  \u003cli\u003eScion iQ: 2012–2015\u003c\/li\u003e\n  \u003cli\u003eScion xB: 2008–2015\u003c\/li\u003e\n  \u003cli\u003eToyota Highlander: 2004–2007\u003c\/li\u003e\n  \u003cli\u003eToyota Sienna: 2004–2006\u003c\/li\u003e\n  \u003cli\u003eToyota Venza: 2009–2014\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this sensor help engine performance and economy?\u003c\/h3\u003e\n\u003cp\u003eBy supplying the engine control unit with accurate oxygen-level data, the sensor enables the ECU to adjust fuel delivery and ignition timing more precisely. Correct sensing helps the engine run closer to optimal air-fuel ratio, which can support efficient combustion and smoother operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnables ECU fuel trim adjustments for balanced combustion\u003c\/li\u003e\n  \u003cli\u003eSupports smoother idle and transient throttle response\u003c\/li\u003e\n  \u003cli\u003eHelps maintain emissions control system effectiveness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat design features improve durability and fit?\u003c\/h3\u003e\n\u003cp\u003eDenso builds this replacement oxygen sensor to OE tolerances for plug-and-play installation and long-term resistance to common exhaust contaminants. The sensor incorporates protective layers and quality materials to reduce risk of premature degradation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-manufactured for first-time fitment into factory mounting\u003c\/li\u003e\n  \u003cli\u003eProtective aluminum-oxide trap layer limits silicone and lead contamination\u003c\/li\u003e\n  \u003cli\u003eFour-wire harness with approximately 13.78\" lead for correct connector reach\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I check during replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally straightforward for anyone familiar with under-vehicle service or routine exhaust work; basic hand tools and a proper sensor socket are typically all that’s required. Always allow the exhaust to cool, disconnect the battery if recommended, and confirm the vehicle’s exact sensor position before removing the old unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse an O2 sensor socket to avoid damaging the hex and wiring\u003c\/li\u003e\n  \u003cli\u003eCompare connector type and wire count to factory harness before purchasing\u003c\/li\u003e\n  \u003cli\u003eInspect threads and anti-seize (if present) and torque to factory spec\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this replacement oxygen sensor for? This Denso 234-4168 is aimed at owners and technicians who need a like-for-like, narrow-band O2 sensor for the listed Lexus, Scion and Toyota models. If you prioritize an OE-style replacement that matches factory fit and electrical interface, this sensor provides a straightforward option. It is suitable for routine maintenance, emissions troubleshooting, and restoring correct sensor input after a failed or aging unit. Always confirm correct vehicle year and sensor location before ordering to ensure compatibility and fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this Denso sensor a direct replacement for my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This sensor is a direct OE-style replacement for the listed Lexus, Scion and Toyota model years; match your vehicle year and sensor location to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the sensor include the wiring harness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Denso 234-4168 includes a four-wire harness with a 13.78-inch lead and factory-style connector.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":67585576632505,"sku":"B000IYBF6Q","price":163.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/denso-234-4168-front-view.jpg?v=1790472353"},{"product_id":"denso-upstream-air-fuel-ratio-oxygen-sensor-234-9001-10-63-4-wire-heated-harness-direct-fit","title":"Denso Upstream Air–Fuel Ratio Oxygen Sensor 234-9001 — 10.63\" 4‑Wire Heated Harness, Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eDenso 234-9001 is a direct-fit upstream air–fuel ratio (AFR) oxygen sensor with a 10.63\" 4-wire heated harness designed to replace the factory sensor without wiring modifications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Denso air–fuel ratio sensor provides precise exhaust gas readings using a zirconia solid electrolyte element and a built-in heater to reach operating temperature quickly. It’s engineered as an original-equipment-style, plug-and-play replacement for vehicles with automatic transmissions, simplifying installation and restoring accurate fuel trimming and emissions feedback.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor restore engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe AFR oxygen sensor measures oxygen content in the exhaust and sends a voltage signal to the engine control unit for fuel mixture adjustments. By delivering accurate, consistent readings, it helps the ECU maintain the intended air–fuel ratio for smoother idling and better throttle response.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeated 4-wire design speeds warm-up for reliable early readings.\u003c\/li\u003e\n  \u003cli\u003eZirconia sensing element produces repeatable, high-resolution data.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit connector matches original factory plug—no splicing.\u003c\/li\u003e\n  \u003cli\u003eUpstream placement helps with primary fuel trim control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this Denso sensor a straightforward replacement?\u003c\/h3\u003e\n\u003cp\u003eThis unit is manufactured to match OE fit and function, so installation is typically bolt-in with the factory harness. The 10.63-inch harness length and four-wire configuration are tailored for compatibility with many auto-transmission-equipped models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-style plug lets you reconnect without cutting or rewiring.\u003c\/li\u003e\n  \u003cli\u003ePre-measured 10.63\" wire harness fits common upstream mounting locations.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit shell and threads align with factory ports for simple install.\u003c\/li\u003e\n  \u003cli\u003eComes tested for correct electrical output and heater operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and accurate is the 234-9001 sensor?\u003c\/h3\u003e\n\u003cp\u003eDenso designs its AFR sensors for longevity and stable output in harsh underhood conditions. Materials and construction resist thermal cycling and contamination to provide consistent performance over the sensor’s service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eZirconia solid electrolyte offers stable oxygen sensing characteristics.\u003c\/li\u003e\n  \u003cli\u003eHeater circuit supports rapid activation after cold starts.\u003c\/li\u003e\n  \u003cli\u003eCasing and seals built to withstand engine bay heat and vibration.\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet OEM quality specifications for reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Denso 234-9001 is intended for owners, DIY mechanics, and professional technicians who need a reliable upstream air–fuel ratio sensor replacement for auto-transmission vehicles. Choose this part when your vehicle reports oxygen sensor-related fault codes, exhibits rough idle or reduced fuel efficiency, or when you want an OE-style plug-and-play sensor with a precise zirconia element and a pre-attached 10.63\" 4-wire harness for fast installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Denso 234-9001 a direct plug-in replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s an OE-style direct-fit sensor with a 10.63\" 4-wire harness—no wire cutting required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor work on vehicles with automatic transmissions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 234-9001 is specified for use in auto-transmission equipped vehicles as an upstream AFR sensor.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":67585589936313,"sku":"B000C5WD2Q","price":338.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/denso-234-9001-front-packaging.jpg?v=1790473145"},{"product_id":"xinlidatech-oxygen-o2-sensor-kit-for-ford-f-150-2-7l-v6-2018-2020-4pc-oe-fit-prewired","title":"xinlidatech Oxygen O2 Sensor Kit for Ford F-150 2.7L V6 (2018–2020) — 4pc OE-fit, Prewired","description":"\u003cp\u003e\u003cstrong\u003eThis four-piece xinlidatech oxygen sensor kit replaces the upstream left\/right and both downstream O2 sensors for Ford F-150 2.7L V6 Turbocharged models from 2018–2020.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your F-150 is running the 2.7L EcoBoost V6 from model years 2018, 2019, or 2020, this complete sensor set is built to match the original equipment fitment and wiring length. The kit includes two upstream sensors (left and right) and two downstream sensors, designed to plug directly into the factory harness for most installations. These sensors replace part numbers 234-5174, 234-5173, and 234-8050 and are constructed with durable materials for resistance to heat and road exposure.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit match my truck's original equipment?\u003c\/h3\u003e\n\u003cp\u003exinlidatech engineered this set to mirror OE-style connectors and harness lengths so each sensor fits without cutting or splicing in typical installations. The sensors use the same mounting thread and electrical interface as the factory parts to simplify replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit connectors for plug-and-play installation\u003c\/li\u003e\n  \u003cli\u003eCorrect thread and sensor dimensions to match factory ports\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers 234-5174, 234-5173, 234-8050\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the materials and durability features?\u003c\/h3\u003e\n\u003cp\u003eThese O2 sensors combine a stainless steel housing with a ceramic sensing element to withstand high exhaust temperatures and corrosive conditions. They are manufactured under quality checks to provide consistent sensor response and longer in-service life compared with generic alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel body resists rust and road chemicals\u003c\/li\u003e\n  \u003cli\u003eCeramic sensing element for quick response to exhaust changes\u003c\/li\u003e\n  \u003cli\u003eTested to meet industry durability standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and engine configurations are compatible?\u003c\/h3\u003e\n\u003cp\u003eThe set is specifically intended for Ford F-150 trucks equipped with the 2.7L V6 Turbocharged (EcoBoost) engine from model years 2018, 2019, and 2020. Confirm your truck’s year and engine displacement before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: Ford F-150 Lariat, XL, XLT with 2.7L V6 Turbocharged (2018–2020)\u003c\/li\u003e\n  \u003cli\u003eVerify vehicle VIN or engine spec to match 2.7L EcoBoost\u003c\/li\u003e\n  \u003cli\u003eIncludes 1 upstream left, 1 upstream right, 2 downstream sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the package and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe package includes four prewired sensors: upstream left (234-5174), upstream right (234-5173), and two downstream sensors (234-8050). Most DIY mechanics can install these with common hand tools and a dedicated oxygen sensor socket; professional installation is an option if you prefer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTotal: 4 pieces — 2 upstream (left\/right) and 2 downstream\u003c\/li\u003e\n  \u003cli\u003eOE-style plugs and harness lengths reduce installation time\u003c\/li\u003e\n  \u003cli\u003eStandard sensor thread fits factory exhaust ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? This xinlidatech sensor kit is aimed at Ford F-150 owners and mechanics who need a full oxygen-sensor replacement for the 2.7L EcoBoost V6 (2018–2020). It’s ideal when replacing multiple sensors at once, prepping a vehicle for emissions testing, or restoring accurate air-fuel monitoring after exhaust repairs. Before purchasing, double-check your truck’s year and engine size to ensure proper fitment. If you have any questions about fit or installation, xinlidatech offers after-sales support to help resolve concerns promptly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors fit my 2019 Ford F-150 2.7L V6?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this set is designed for 2018–2020 Ford F-150 2.7L V6 Turbocharged models; confirm your engine is the 2.7L EcoBoost.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to splice wires to install these sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—xinlidatech sensors use OE-style connectors and correct harness lengths for plug-and-play installation in most cases.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"xinlidatech","offers":[{"title":"Default Title","offer_id":67585598685369,"sku":"B0G6DRYRNJ","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/xinlidatech-front-packaging-set.jpg?v=1790473706"},{"product_id":"robinair-oxygen-sensor-for-r-1234yf-ac-machines-refrigerant-identifiers-part-16916-oem-direct-fit-restores-accuracy","title":"Robinair Oxygen Sensor for R-1234yf AC Machines \u0026 Refrigerant Identifiers — Part 16916, OEM Direct-Fit Restores Accuracy","description":"\u003cp\u003e\u003cstrong\u003eRobinair 16916 is the factory oxygen sensor designed as the direct, plug-and-play replacement for Robinair R-1234yf AC machines and refrigerant identifiers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your Robinair AC machine or refrigerant identifier signals a sensor warning or lockout, swapping in a genuine 16916 restores the unit’s original sensing accuracy and operational reliability. This sensor matches the exact specifications used at the factory, so installation is straightforward and the tool’s two-level sensor alerts function as intended: early life warnings followed by a fail-safe lockout if replacement is overdue.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor affect my Robinair R-1234yf machine’s performance?\u003c\/h3\u003e\n\u003cp\u003eThe oxygen sensor monitors residual oxygen to protect refrigerant purity and enable safe tank fills. A genuine Robinair 16916 maintains the calibrated thresholds used by the machine, preserving diagnostic accuracy and preventing false alarms or unnecessary downtime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores original factory sensing parameters for accurate readings\u003c\/li\u003e\n  \u003cli\u003ePrevents lockouts caused by degraded or incompatible sensors\u003c\/li\u003e\n  \u003cli\u003eEnsures consistent performance across different service cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the replacement and what should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eReplacement is designed to be simple and tool-friendly, following the maintenance steps in your machine’s owner manual. Once fitted, the machine recognizes the new sensor immediately and returns to normal operation with no complex recalibration required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for compatible Robinair models—no adapters needed\u003c\/li\u003e\n  \u003cli\u003eFollow owner manual maintenance section for step-by-step guidance\u003c\/li\u003e\n  \u003cli\u003eImmediate restoration of fill and recover functions after replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Robinair units are compatible with the 16916 oxygen sensor?\u003c\/h3\u003e\n\u003cp\u003eThe 16916 is the authentic replacement for a range of Robinair R-1234yf series AC machines and refrigerant identifiers. Using the OEM sensor guarantees the electrical and chemical specifications match the original design.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Robinair AC1234-4, AC1234-4SL, AC1234-4 230, AC1234-6, AC1234-9\u003c\/li\u003e\n  \u003cli\u003eCompatible with Robinair 16990 and 16995 refrigerant identifiers\u003c\/li\u003e\n  \u003cli\u003eAvoids compatibility problems common with aftermarket alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose a genuine Robinair sensor over aftermarket options?\u003c\/h3\u003e\n\u003cp\u003eAftermarket sensors may differ in sensitivity, lifespan, or connector compatibility, which can lead to false warnings, premature failures, or machine lockouts. The OEM 16916 is manufactured to Robinair’s original tolerances so the unit’s two-stage notification system works as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM tolerances minimize the risk of mismatched operating parameters\u003c\/li\u003e\n  \u003cli\u003eReduces chance of inaccurate readings or equipment downtime\u003c\/li\u003e\n  \u003cli\u003eSupports the device’s built-in maintenance and replacement alerts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians and workshop managers who service vehicles with R-1234yf systems and rely on Robinair AC machines or refrigerant identifiers will get the most value from the 16916. It’s aimed at professionals who want a fast, reliable sensor swap that preserves machine accuracy and avoids the uncertainty of non-OEM parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will my machine require recalibration after replacing the 16916 sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No recalibration is typically needed; the machine recognizes the genuine 16916 and resumes normal operation immediately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use aftermarket sensors instead of the Robinair 16916?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Aftermarket sensors can differ in specs and may cause inaccurate readings or lockouts; OEM 16916 ensures proper fit and performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Robinair","offers":[{"title":"Default Title","offer_id":67585605271737,"sku":"B07FDHJBQQ","price":727.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/robinair-16916-front-view.jpg?v=1790473996"},{"product_id":"bdfhyk-oxygen-sensor-set-for-nissan-rogue-altima-2010-2013-upstream-downstream-direct-fit-stainless-steel","title":"BDFHYK Oxygen Sensor Set for Nissan Rogue \u0026 Altima 2010–2013 — Upstream\/Downstream Direct-Fit, Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003eBDFHYK replacement oxygen sensor set fits Nissan Rogue and Altima 2010–2013 models, providing direct-fit upstream and downstream sensing to restore fuel trim and emissions monitoring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis BDFHYK oxygen sensor assembly is engineered as a direct replacement for the factory units listed by OE cross-references, made from high-temperature stainless steel and tested for reliable response and long life. It is offered as an upstream\/downstream option compatible with multiple Nissan 2.5L engines from 2010 through 2013, and is built to meet OE fitment and connector requirements for straightforward installation when proper tools and safety practices are used.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this oxygen sensor affect my car’s performance?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing a failing oxygen sensor helps the engine control unit get accurate air–fuel information, which supports smoother idling, consistent throttle response, and better emissions control. A correct sensor prevents prolonged rich or lean running that can harm catalytic converters and fuel economy.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRestores accurate oxygen readings to the ECU for correct fuel trim adjustments.\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize idle and reduce hesitation under acceleration.\u003c\/li\u003e\n  \u003cli\u003eProtects downstream emissions components by preventing incorrect fueling.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design reduces installation time and connector compatibility issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Nissan models and OE numbers does this part match?\u003c\/h3\u003e\n\n\u003cp\u003eThis sensor set fits Nissan Rogue and Altima 2.5L vehicles from model years 2010 to 2013, and corresponds to several common OEM part numbers for upstream and downstream locations. Refer to the vehicle’s service manual or pictures to confirm location and harness type before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Nissan Rogue 2.5L (2010–2013), Nissan Altima 2.5L (2010–2013).\u003c\/li\u003e\n  \u003cli\u003eReplacement OE references: 234-9036, 1821382Z50, 226931NA0A, 22693ZX70A.\u003c\/li\u003e\n  \u003cli\u003eAlso cross-referenced to: 234-4381, 22690ED000, 226A0EN21A.\u003c\/li\u003e\n  \u003cli\u003eVerify sensor location (upstream vs downstream) for correct selection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build qualities ensure durability?\u003c\/h3\u003e\n\n\u003cp\u003eBDFHYK sensors are constructed with corrosion-resistant stainless steel and high-temperature internal components designed to withstand exhaust conditions. Production testing focuses on response time and stability to ensure a functional lifespan comparable to or better than many aftermarket options.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStainless-steel housing to resist corrosion and heat exposure.\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature internal elements for consistent sensing response.\u003c\/li\u003e\n  \u003cli\u003eManufacturing tests for response speed and signal stability.\u003c\/li\u003e\n  \u003cli\u003eConnector and threads made to OE dimensions for proper sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I handle installation and safety?\u003c\/h3\u003e\n\n\u003cp\u003eThe sensor is manufactured to OE dimensions for a direct fit, but safe removal and installation require correct tools and care to avoid damaging threads or exhaust components. Allow the exhaust to cool fully and use an oxygen sensor socket or impact tools as recommended by repair guides.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWait until the exhaust system is cool to prevent burns.\u003c\/li\u003e\n  \u003cli\u003eUse a proper oxygen sensor socket or breaker bar; avoid damaging threads.\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs in the vehicle manual when tightening the sensor.\u003c\/li\u003e\n  \u003cli\u003eInspect wiring harness and connectors for corrosion before connecting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BDFHYK oxygen sensor set is suitable for DIYers and professional installers servicing Nissan Rogue or Altima 2.5L models from 2010–2013 who need a direct-replacement upstream or downstream unit. Choose this part if you want an OE-dimension sensor built with stainless steel and high-temperature materials, backed by a manufacturer that offers a limited quality assurance period and responsive support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor fit my 2012 Nissan Rogue 2.5L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This BDFHYK sensor set lists compatibility with Nissan Rogue 2.5L model years 2010–2013. Verify your vehicle’s connector and sensor location before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit come with a warranty or support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: BDFHYK offers a 6-month quality assurance period and customer support with responses typically within 48 hours.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BDFHYK","offers":[{"title":"Default Title","offer_id":67585683849401,"sku":"B0DD3CVJNY","price":108.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bdfhyk-front-packaging-sensor.jpg?v=1790475335"},{"product_id":"ransoto-o2-oxygen-sensor-set-4-pack-for-ford-f150-f250-f350-more-upstream-downstream-replacement","title":"RANSOTO O2 Oxygen Sensor Set - 4-Pack for Ford F150\/F250\/F350 \u0026 More, Upstream\/Downstream Replacement","description":"\u003cstrong\u003eRANSOTO O2 Oxygen Sensor 15717 set of four replaces upstream and downstream sensors for compatible Ford, Lincoln, Mazda and Mercury models to restore proper exhaust sensing and engine management.\u003c\/strong\u003e\n\n\u003cp\u003eThese RANSOTO oxygen sensors are aftermarket replacements designed to match factory fit and electrical connections for a broad range of Ford-platform vehicles plus select Lincoln, Mazda, Mercury and Jaguar models. Sold as a set of four, the kit includes items that correspond to common part numbers (15717, 15716, 15718 and 15719) so you can replace upstream and downstream sensors together and reduce diagnosis time. Each sensor is built to plug into the existing harness and provide the feedback your engine control unit expects for fuel trim and emissions monitoring.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors affect engine performance and diagnostics?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors report exhaust oxygen levels to the vehicle’s computer, which adjusts fuel delivery and ignition timing accordingly. Replacing worn or failing sensors can improve drivability, reduce rough idling and clear fault codes tied to fuel mixture. While these sensors help the ECU make better decisions, outcomes depend on overall engine condition and proper installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for common OEM part numbers to ensure correct signals.\u003c\/li\u003e\n  \u003cli\u003eTighter voltage response helps the ECU maintain proper air–fuel ratio.\u003c\/li\u003e\n  \u003cli\u003eReplacing all related sensors reduces the chance of residual fault codes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers are supported by this set?\u003c\/h3\u003e\n\u003cp\u003eThis four-pack covers many Ford models including F-150\/F-250\/F-350, Explorer, Ranger and Escape, plus multiple Lincoln, Mazda, Mercury and select Jaguar\/Aston Martin applications. It is intended to substitute listed OEM numbers, but you should confirm compatibility by checking your vehicle’s year, engine and existing sensor part number before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM numbers: 15717, 15716, 15718, 15719, 15664, ZZC318861, XR3Z9G444C.\u003c\/li\u003e\n  \u003cli\u003eFits Ford, Lincoln, Mazda, Mercury, Jaguar and some Aston Martin models — verify model year first.\u003c\/li\u003e\n  \u003cli\u003eSold as a set of four for upstream and downstream positions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires standard hand tools and possibly penetrating lubricant for older exhaust fittings. Each sensor is made to match the vehicle’s connector, but wire routing and heat shielding vary by model — follow a repair manual or OEM torque specs when fitting. After installation, clear any stored codes and perform a short drive cycle to let the ECU re-learn sensor characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck connector match and sensor thread size before tightening.\u003c\/li\u003e\n  \u003cli\u003eUse anti-seize only if manufacturer guidance allows; some pre-coated designs are ready to install.\u003c\/li\u003e\n  \u003cli\u003eClear engine fault codes and drive to verify proper operation and emissions readiness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, DIY mechanics and owners of compatible Ford, Lincoln, Mazda, Mercury or Jaguar vehicles who need an economical, full set replacement of both upstream and downstream oxygen sensors. This kit is especially useful when multiple sensors show age-related performance loss or when replacing one sensor reveals others close to end-of-life. If you are unsure about fitment, compare the vehicle’s current sensor part number and connector to the product listing before purchase. RANSOTO backs the kit with a one-year warranty and direct customer support for fitment or quality concerns.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this set replace both upstream and downstream oxygen sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the four-piece kit includes sensors intended for upstream and downstream positions to allow full-bank replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm these sensors fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your vehicle’s year, engine, and existing sensor part number to the listed OEM numbers and connector type before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"RANSOTO","offers":[{"title":"Default Title","offer_id":67585893204153,"sku":"B08PQTBCPY","price":108.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ransoto-front-packaging-oxygen-sensor-set.jpg?v=1790479417"},{"product_id":"qiybone-oxygen-o2-sensor-kit-4-pack-upstream-downstream-oe-fit-for-jeep-dodge-v6-v8","title":"QIYBONE Oxygen O2 Sensor Kit 4-Pack — Upstream \u0026 Downstream OE-Fit for Jeep, Dodge V6\/V8","description":"\u003cp\u003e\u003cstrong\u003eQIYBONE 4PCS oxygen sensor kit replaces upstream and downstream O2 sensors (234-4587 \/ 250-24253) for a broad range of Jeep, Dodge, Chrysler, Ram and compatible models from 2001–2023.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis four-piece sensor set includes both upstream (pre-catalytic) and downstream (post-catalytic) oxygen sensors engineered to match OE electrical and thread specifications for many V6 and V8 engines. Each sensor is built to monitor exhaust oxygen levels, communicate with the vehicle’s engine control unit (ECU), and provide input that helps the engine adjust fuel mixture. The kit ships ready to install and covers dozens of model-year\/engine combinations commonly found across Jeep, Dodge, Chrysler, Ram, Volkswagen Routan and Mitsubishi Raider platforms.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines will accept these QIYBONE O2 sensors?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed as a direct replacement for numerous engines and model years. Fitment spans multiple Jeep families (Wrangler, Grand Cherokee, Cherokee, Liberty, Patriot, Compass, Commander) and many Dodge and Chrysler vehicles including Charger, Challenger, Durango, Grand Caravan and 300. It also lists Ram pickups and vans, plus select Volkswagen and Mitsubishi models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJeep engines: 2.4L–6.4L coverage across 2001–2022 model years\u003c\/li\u003e\n  \u003cli\u003eDodge\/Chrysler: many 2.0L–8.4L engines from 2000–2023\u003c\/li\u003e\n  \u003cli\u003eRam, Volkswagen Routan, Mitsubishi Raider listed where applicable\u003c\/li\u003e\n  \u003cli\u003eCross-references: 234-4587, 250-24253 and many OEM numbers for quick lookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these sensors match original equipment (OE) specifications?\u003c\/h3\u003e\n\u003cp\u003eQIYBONE sensors are manufactured with matching thread size, heater circuits and connector types to simplify replacement without splicing. The design aims to provide reliable electrical resistance and response times similar to factory sensors so the ECU receives consistent oxygen-level data.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-style threads and sealing surfaces for leak-free installation\u003c\/li\u003e\n  \u003cli\u003eHeated elements integrated where required to meet warm-up performance\u003c\/li\u003e\n  \u003cli\u003ePluggable connectors to mate with existing vehicle wiring harnesses\u003c\/li\u003e\n  \u003cli\u003eSold as a set of four to replace both upstream and downstream sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat symptoms indicate a failing oxygen sensor and why replace with a full set?\u003c\/h3\u003e\n\u003cp\u003eCommon signs of a worn O2 sensor include erratic idle, reduced fuel economy, illuminated check-engine light, and trouble passing emissions tests. Replacing only one sensor can leave older mates mismatched; a full four-piece kit restores consistent sensor pairs and helps the ECU recalibrate fuel trims properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck-engine codes P013x, P014x, P015x often point to O2 issues\u003c\/li\u003e\n  \u003cli\u003eReplacing upstream and downstream sensors ensures balanced feedback loops\u003c\/li\u003e\n  \u003cli\u003eChanging sensors in matched sets can prevent drivability or emissions imbalances\u003c\/li\u003e\n  \u003cli\u003eIncludes part numbers for easy verification against existing OEM tags\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This QIYBONE 4PCS oxygen sensor kit is for professional mechanics, DIY enthusiasts and fleet owners who need a comprehensive OE-style replacement across multiple Chrysler, Dodge, Jeep and Ram applications. Choose this set when you want a matched upstream\/downstream solution that covers many engines and model years—especially useful when diagnostics identify multiple sensor failures or when restoring emissions performance after long-term service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2015 Jeep Grand Cherokee 3.6L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The QIYBONE 4PCS kit lists fitment for Jeep Grand Cherokee 3.6L model years including 2015. Verify connector and part numbers against your vehicle before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors include heating elements for fast warm-up?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set includes heated oxygen sensors where required to match OE warm-up characteristics for accurate ECU feedback.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QIYBONE","offers":[{"title":"Default Title","offer_id":67586236645561,"sku":"B0GVTK4CYJ","price":125.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/qiybone-front-view.jpg?v=1790481393"},{"product_id":"htmxja-oxygen-o2-sensor-4-piece-kit-for-ford-mazda-v6-3-0l-3-7l-upstream-downstream-direct-fit-replacement","title":"HTMXJA Oxygen O2 Sensor 4-Piece Kit for Ford \u0026 Mazda V6 (3.0L–3.7L) – Upstream \u0026 Downstream, Direct-Fit Replacement","description":"\u003cstrong\u003eHTMXJA 4-piece upstream and downstream oxygen sensor set replaces OE#234-5038 and 234-4490 to restore accurate air-fuel monitoring and emissions performance on compatible Ford and Mazda V6 vehicles.\u003c\/strong\u003e\n\n\u003cp\u003eThis complete four-sensor kit from HTMXJA is engineered as a direct-fit replacement for a wide range of Ford, Lincoln, Mercury and Mazda models with 3.0L–3.7L engines from model years 2010–2016. Each sensor follows OEM dimensions so installation requires no modification and plugs into factory harnesses. The set includes both upstream (pre-catalyst) and downstream (post-catalyst) sensors to give you full control of the engine control module's (ECM) oxygen feedback loop after a failure or when restoring emissions readiness.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engine combinations will accept these HTMXJA oxygen sensors?\u003c\/h3\u003e\n\u003cp\u003eThese sensors are labeled to fit many Ford and Mazda V6 petrol engines across model years 2010–2016. Always verify your vehicle’s OE part number against 234-5038 or 234-4490 and check connector style before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord Edge 3.7L \u0026amp; 3.5L (2011–2014)\u003c\/li\u003e\n  \u003cli\u003eFord F-150 and Mustang 3.7L (2011–2014)\u003c\/li\u003e\n  \u003cli\u003eExplorer 3.5L (2011–2015)\u003c\/li\u003e\n  \u003cli\u003eEscape\/Fusion\/Mariner\/Milan\/CX-9\/Tribute 3.0L–3.7L (2010–2015)\u003c\/li\u003e\n  \u003cli\u003eLincoln MKZ\/MKS\/MKX\/MKT and Mercury models listed in spec\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these sensors affect fuel economy and emissions monitoring?\u003c\/h3\u003e\n\u003cp\u003eWorn or failing oxygen sensors send incorrect voltage signals to the ECM, which can force the engine into an aggressive enrichment or lean strategy. Replacing faulty upstream and downstream sensors helps the ECM maintain the intended air-fuel ratio, improving combustion efficiency and helping the catalytic converter work as designed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct oxygen-voltage feedback for the ECM\u003c\/li\u003e\n  \u003cli\u003eHelps return engine control to factory fuel trims\u003c\/li\u003e\n  \u003cli\u003eSupports accurate downstream catalyst monitoring and OBD readiness\u003c\/li\u003e\n  \u003cli\u003eMay reduce rough idle and fuel-wasting conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and warranty details for HTMXJA sensors?\u003c\/h3\u003e\n\u003cp\u003eHTMXJA sensors are manufactured from corrosion-resistant materials and designed to meet OEM fit, form and connector specifications for straightforward installation. The kit comes with a six-month warranty and is intended as a plug-and-play replacement for listed OE reference numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable sensing element and stainless housing\u003c\/li\u003e\n  \u003cli\u003eFactory-style connector and wiring length for direct fit\u003c\/li\u003e\n  \u003cli\u003eSix-month limited warranty included\u003c\/li\u003e\n  \u003cli\u003eSold as a four-piece set to cover upstream and downstream positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and verify these oxygen sensors after replacement?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically simple with common hand tools and a sensor socket; always allow the exhaust to cool before starting. After installation, clear any stored codes with an OBD-II scanner and perform a short test drive to confirm the ECU detects correct sensor operation and returns normal fuel trim values.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsure vehicle is cool; disconnect the battery per procedure\u003c\/li\u003e\n  \u003cli\u003eUse an oxygen sensor socket or crowfoot to avoid damage\u003c\/li\u003e\n  \u003cli\u003eClear codes and cycle the ignition to reset readiness monitors\u003c\/li\u003e\n  \u003cli\u003eVerify no exhaust leaks at threads and check for CEL absence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This HTMXJA four-pack is suited for DIY mechanics, independent repair shops and fleet owners who need a cost-effective, direct-replacement oxygen sensor solution for 2010–2016 Ford, Lincoln, Mercury and Mazda V6 models. Choose this kit when OE part numbers 234-5038 or 234-4490 match your vehicle and you want plug-in compatibility with OEM-style connectors and durable materials for reliable emissions and fuel-trim feedback.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these HTMXJA oxygen sensors fit my 2012 Ford Explorer 3.5L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit lists Explorer 3.5L for 2011–2015; confirm your OE number (234-5038 or 234-4490) before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers the HTMXJA O2 sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The sensors include a six-month limited warranty; save your purchase details for any warranty claims.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HTMXJA","offers":[{"title":"Default Title","offer_id":67586292580537,"sku":"B0F8GT7R14","price":148.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/htmxja-front-packaging-four-sensors.jpg?v=1790482222"},{"product_id":"zubaydee-oxygen-o2-sensor-for-honda-accord-cr-v-2-4l-2013-2017-direct-fit-oe-style-restores-air-fuel","title":"zubaydee Oxygen O2 Sensor for Honda Accord \u0026 CR-V 2.4L (2013–2017) — Direct-Fit OE-Style, Restores Air-Fuel","description":"\u003cp\u003e\u003cstrong\u003ezubaydee Oxygen O2 Sensor is a direct-fit replacement sensor engineered to restore accurate air-fuel readings for Honda 2.4L engines from selected model years.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement oxygen sensor is built to match the original equipment fitment and signal characteristics for specific Honda CR-V and Accord 2.4L models. It monitors exhaust oxygen levels and communicates with the engine control unit so the fuel trim and emissions systems can operate properly. Before ordering, confirm the OE part numbers (234-9131 or 234-4980) or verify vehicle compatibility to ensure correct fitment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this O2 sensor affect engine performance and emissions?\u003c\/h3\u003e\n\u003cp\u003eThe oxygen sensor helps the engine control unit maintain the right air-fuel mixture by reporting exhaust oxygen content. A functioning sensor supports more consistent idling, smoother throttle response, and more stable fuel economy. While not a cure-all, replacing a failed sensor often resolves diagnostic trouble codes and improves emissions readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides accurate oxygen-level feedback to the ECU\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize fuel trims and reduce rough idling\u003c\/li\u003e\n  \u003cli\u003eContributes to passing emissions inspections when faulty sensor was the issue\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sensor fit my Honda Accord or CR-V?\u003c\/h3\u003e\n\u003cp\u003eThis zubaydee sensor is compatible with Honda CR-V 2.4L (2012–2019) and Honda Accord 2.4L (2013–2017) when the vehicle uses OE part numbers 234-9131 or 234-4980. Vehicle engine codes, production month, and factory options can affect fitment, so always cross-reference your VIN or existing part number before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models listed: CR-V (2012–2019), Accord (2013–2017)\u003c\/li\u003e\n  \u003cli\u003eConfirm by comparing OE part numbers 234-9131 \/ 234-4980\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle VIN or consult a parts professional for verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for a mechanically inclined owner or a technician: unplug the sensor connector, remove the old sensor with an oxygen sensor socket, then thread in and torque the new unit to specification. Use anti-seize on threads only if the manufacturer supplies it; avoid damaging the wiring or connector. Regular checks during routine service can help catch early failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires oxygen-sensor socket or appropriate hand tools\u003c\/li\u003e\n  \u003cli\u003eDisconnect battery and allow exhaust to cool before removal\u003c\/li\u003e\n  \u003cli\u003eReplace if diagnostic codes indicate sensor failure or drifting signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part compare to OEM and aftermarket options?\u003c\/h3\u003e\n\u003cp\u003ezubaydee supplies an OE-style replacement designed to match the original sensor’s electrical and mechanical characteristics without the premium OEM price. It’s intended as a direct fit alternative rather than a performance upgrade. Choose this unit when you need reliable restoration of factory-style sensor function at a value price point.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-part equivalent fit and signal output\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet factory connector and thread specifications\u003c\/li\u003e\n  \u003cli\u003eCost-effective replacement versus branded OEM units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and mechanics who own Honda CR-V (2012–2019) or Accord (2013–2017) 2.4L models and need a dependable, direct-fit oxygen sensor replacement. This product suits DIY enthusiasts comfortable with basic exhaust work, independent repair shops seeking OE-style parts, and anyone troubleshooting emissions or fuel-trim related check-engine lights. Verify your vehicle’s OE part number or VIN before ordering to ensure correct compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sensor fit Honda Accord 2.4L 2015?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits Accord 2.4L model years 2013–2017. Confirm OE part numbers 234-9131 or 234-4980 for a final match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this oxygen sensor myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, with basic tools and safety precautions. Use an oxygen-sensor socket and verify torque specs; seek a mechanic if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"zubaydee","offers":[{"title":"Default Title","offer_id":67586425028793,"sku":"B0FC35HC3S","price":119.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/zubaydee-front-packaging-sensor.jpg?v=1790483293"},{"product_id":"blpextrm-oxygen-o2-sensor-for-dodge-charger-ram-1500-upstream-downstream-direct-fit-fast-response","title":"BLPextrm Oxygen O2 Sensor for Dodge Charger \u0026 Ram 1500 – Upstream\/Downstream Direct-Fit, Fast Response","description":"\u003cp\u003e\u003cstrong\u003eThe BLPextrm Oxygen O2 Sensor (upstream and downstream) is a direct-fit replacement sensor designed to restore accurate oxygen readings and engine performance for compatible Dodge, Ram and Chrysler vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your check-engine light flags an O2 sensor fault, or your vehicle shows unstable idle, reduced fuel economy, or rough acceleration, a reliable upstream or downstream oxygen sensor can help the engine control module get accurate exhaust readings again. BLPextrm supplies sensors engineered to withstand high exhaust temperatures and deliver faster response times than worn originals, helping the vehicle manage air–fuel ratio and emissions more consistently.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this BLPextrm sensor replace?\u003c\/h3\u003e\n\u003cp\u003eThis sensor fits a wide range of Chrysler, Dodge, Jeep and Ram applications — including Charger, Avenger, Caravan, Challenger, Grand Cherokee, Wrangler, Ram 1500\/2500\/3500 and others. Always verify the vehicle year, engine position (upstream or downstream) and OEM part number before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include: Dodge Charger, Avenger, Caravan, Challenger, Ram 1500\/1500 Classic\/2500\/3500, Jeep Grand Cherokee, Wrangler, Cherokee, Chrysler 200\/300, Pacifica and more.\u003c\/li\u003e\n  \u003cli\u003eReplaces many OEM numbers such as 56029084AA, 56041698AA, 56044627AA and others listed by BLPextrm.\u003c\/li\u003e\n  \u003cli\u003eSold as upstream (pre-catalytic) and downstream (post-catalytic) fitments — confirm sensor location with vehicle repair manual or VIN lookup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the BLPextrm sensor constructed and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eThe sensor uses corrosion-resistant materials and internal elements built to tolerate harsh exhaust conditions. Materials selected for thermal stability allow continuous operation at elevated temperatures, improving longevity and stable output under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated to operate at temperatures up to approximately 650°C for reliable sensing in hot exhaust streams.\u003c\/li\u003e\n  \u003cli\u003eDesigned for fast response time to rapidly reflect changes in exhaust oxygen content.\u003c\/li\u003e\n  \u003cli\u003eRobust sealing and wiring to resist vibration, moisture and contaminants common in underbody locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat problems can installing this oxygen sensor help resolve?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failing O2 sensor can address drivability and emissions symptoms caused by inaccurate oxygen readings. While not a cure-all for unrelated engine issues, a good sensor helps the engine control unit make better fuel-trim decisions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces erratic idle, frequent stalling and hesitation caused by poor air–fuel mixture data.\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize fuel trims to improve fuel economy when the sensor provides accurate feedback.\u003c\/li\u003e\n  \u003cli\u003eRestores correct sensor signals for emissions testing readiness and catalytic converter monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose the correct upstream or downstream sensor for my vehicle?\u003c\/h3\u003e\n\u003cp\u003eMatch the new sensor to your vehicle’s exact model year, engine type and the OEM part number you are replacing. Upstream sensors are mounted before the catalytic converter; downstream sensors are after it — each has a different role in control strategy.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm vehicle make, model, year and engine code, then cross-check the OEM part number list provided by BLPextrm.\u003c\/li\u003e\n  \u003cli\u003eLook at the physical sensor location on the exhaust manifold (upstream) versus after the cat (downstream) to ensure correct fitment.\u003c\/li\u003e\n  \u003cli\u003eUse an OBD-II scanner to view live sensor data and verify which bank or sensor number reports faults if unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BLPextrm oxygen sensor is intended for owners and mechanics seeking a cost-effective, direct-fit replacement for Chrysler, Dodge, Jeep and Ram vehicles experiencing O2 sensor-related faults. It suits DIYers familiar with basic under-vehicle service and professional shops needing a dependable aftermarket sensor that matches many OEM part numbers. Always verify fitment by comparing the vehicle’s part number, sensor location and connector style before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this BLPextrm sensor fit my Ram 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your Ram’s model year, engine and OEM part number against BLPextrm’s compatibility list before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I swap upstream and downstream sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — upstream and downstream sensors serve different roles; install the sensor designed for the specific exhaust position.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BLPextrm","offers":[{"title":"Default Title","offer_id":67586449080505,"sku":"B09HK8SF9J","price":119.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blpextrm-front-packaging-sensor.jpg?v=1790483799"},{"product_id":"wobiwina-oxygen-sensor-set-for-toyota-lexus-2-5l-upstream-downstream-234-9304-234-9307-restores-accurate-o2-readings","title":"Wobiwina Oxygen Sensor Set for Toyota\/Lexus 2.5L — Upstream \u0026 Downstream (234-9304\/234-9307) Restores Accurate O2 Readings","description":"\u003cp\u003e\u003cstrong\u003eWobiwina oxygen sensor set (234-9304 \u0026amp; 234-9307) is a two-piece upstream and downstream replacement designed to restore accurate O2 readings for specified Toyota and Lexus 2.5L models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle’s engine light points to an air-fuel or emissions sensor issue, this matched pair from Wobiwina offers a direct-fit aftermarket option for several Toyota and Lexus models. The pair replaces both pre- and post-catalyst oxygen sensors so the engine control unit receives consistent feedback on exhaust oxygen levels, which helps the vehicle manage fuel delivery and emissions systems (always verify vehicle fitment before purchase).\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines will accept this Wobiwina sensor set?\u003c\/h3\u003e\n\u003cp\u003eThis sensor set is produced to fit 2.5L engines in select model years. Confirm your vehicle’s year, engine size and existing sensor part numbers before ordering to ensure correct compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCamry: 2018–2023, 2.5L\u003c\/li\u003e\n  \u003cli\u003eAvalon: 2020–2022, 2.5L\u003c\/li\u003e\n  \u003cli\u003eRAV4: 2019–2024, 2.5L\u003c\/li\u003e\n  \u003cli\u003eLexus ES300h: 2019–2020, 2.5L\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these upstream and downstream sensors differ and why buy the set?\u003c\/h3\u003e\n\u003cp\u003eUpstream (pre-catalyst) sensors primarily guide fuel trim and combustion control, while downstream (post-catalyst) sensors monitor catalyst efficiency. Buying both at once ensures matched response characteristics and removes uncertainty about compatibility or remaining sensor life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes both upstream and downstream sensors (pre- and post-catalyst)\u003c\/li\u003e\n  \u003cli\u003eSold as a matched set for consistent ECU readings\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers 234-9304 and 234-9307\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I inspect before installing these oxygen sensors?\u003c\/h3\u003e\n\u003cp\u003eDouble-check that the OEM part numbers and connector type match your vehicle’s harness and that the engine code is 2.5L for the listed models. Inspect the harness plug, mounting threads, and oxygen sensor bung for corrosion or damage before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify existing part numbers and connector style\u003c\/li\u003e\n  \u003cli\u003eCheck threads and wiring harness for wear or heat damage\u003c\/li\u003e\n  \u003cli\u003eConfirm engine displacement and model year compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these sensors myself, and what tools or precautions are needed?\u003c\/h3\u003e\n\u003cp\u003eMany DIYers can replace oxygen sensors with basic tools, but proper safety and torque spec adherence are essential. Use an oxygen sensor socket or open-end wrench, anti-seize where recommended, and ensure the exhaust is cool before starting work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse an oxygen-sensor socket or suitable wrench\u003c\/li\u003e\n  \u003cli\u003eWork only on a cooled exhaust to avoid burns\u003c\/li\u003e\n  \u003cli\u003eApply anti-seize carefully if specified; avoid contaminating the sensor tip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Wobiwina 234-9304\/234-9307 upstream and downstream sensor set is intended for owners and technicians servicing the listed Toyota and Lexus 2.5L models who want a direct-fit aftermarket replacement. It’s useful for those addressing OBD-II trouble codes related to oxygen sensors or catalytic converter monitoring, and for anyone replacing both sensors to ensure uniform performance across the exhaust system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sensors direct replacements for OEM parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this set is made as direct-fit replacements for OEM part numbers 234-9304 and 234-9307 for the listed models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace both sensors at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replacing both upstream and downstream together ensures matched performance, though you can replace only the failed unit if preferred.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wobiwina","offers":[{"title":"Default Title","offer_id":67586484306105,"sku":"B0F32Y45RG","price":121.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wobiwina-front-packaging-box.jpg?v=1790484511"},{"product_id":"higherbro-oxygen-o2-sensor-pair-upstream-downstream-replacement-for-2014-2020-hyundai-kia-direct-fit-with-1-year-warranty","title":"higherbro Oxygen O2 Sensor Pair — Upstream \u0026 Downstream Replacement for 2014–2020 Hyundai\/Kia, Direct-Fit with 1-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eThe higherbro 2PCS Oxygen O2 Sensor set includes one upstream and one downstream sensor engineered to restore accurate air-fuel readings and emissions performance on compatible Hyundai and Kia models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two replacement O2 sensors are built to match factory fitment for several 2014–2020 Hyundai and Kia vehicles. They connect to the vehicle’s exhaust system to monitor oxygen levels before and after the catalytic converter, helping the engine control unit adjust fuel delivery. Each set ships with both sensors — one upstream (pre-catalytic converter) and one downstream (post-catalytic converter) — and is backed by a 1-year unlimited mileage quality guarantee.\u003c\/p\u003e\n\n\u003ch3\u003eWhich cars are these higherbro sensors compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis pair fits a range of Hyundai and Kia models across specific engine sizes and model years. Verify part numbers and your vehicle’s year\/engine before purchasing to ensure a direct, bolt-in replacement without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2014–2016 Hyundai Elantra 1.8L\u003c\/li\u003e\n  \u003cli\u003e2015–2016 Hyundai Elantra 2.0L\u003c\/li\u003e\n  \u003cli\u003e2018–2020 Hyundai Kona 2.0L\u003c\/li\u003e\n  \u003cli\u003e2019–2020 Hyundai Tucson 2.0L\u003c\/li\u003e\n  \u003cli\u003e2014–2016 Kia Forte 1.8L\u003c\/li\u003e\n  \u003cli\u003e2019–2020 Kia Forte 2.0L\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do upstream and downstream O2 sensors differ and why both matter?\u003c\/h3\u003e\n\u003cp\u003eThe upstream sensor measures oxygen in exhaust gases as they leave the engine to help the ECU set the correct fuel mixture, while the downstream sensor monitors catalytic converter efficiency. Replacing both sensors at once ensures accurate feedback on both fuel control and emissions aftertreatment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream: controls real-time air-fuel adjustments.\u003c\/li\u003e\n  \u003cli\u003eDownstream: checks converter performance and emissions output.\u003c\/li\u003e\n  \u003cli\u003eReplacing both prevents mismatched sensor readings and check-engine triggers.\u003c\/li\u003e\n  \u003cli\u003eFactory-style connectors and lengths for proper installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and performance expectations?\u003c\/h3\u003e\n\u003cp\u003eThese sensors are designed for a direct swap with factory locations using original-style connectors and wiring pigtails. Typical installation requires standard hand tools and about 30–90 minutes depending on vehicle access; a torque-specified O2 sensor socket is recommended for reliable sealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement with OEM-style connectors.\u003c\/li\u003e\n  \u003cli\u003eRequires removal of old sensors and threading into original ports.\u003c\/li\u003e\n  \u003cli\u003eUse anti-seize compound only where specified; avoid contaminating sensing tip.\u003c\/li\u003e\n  \u003cli\u003eAfter installation, clear any stored codes and confirm proper operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the warranty cover and how long does it last?\u003c\/h3\u003e\n\u003cp\u003ehigherbro includes a 1-year unlimited mileage quality guarantee with this 2-piece O2 sensor set. The warranty protects against manufacturing defects and premature failure under normal use; it does not cover damage from improper installation, abuse, or vehicle modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1-year coverage with unlimited mileage.\u003c\/li\u003e\n  \u003cli\u003eCovers manufacturing defects and function failure.\u003c\/li\u003e\n  \u003cli\u003eExclusions: misuse, physical damage, or aftermarket modifications.\u003c\/li\u003e\n  \u003cli\u003eContact higherbro support with proof of purchase for warranty claims.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This higherbro 2PCS O2 sensor set is aimed at DIY mechanics, independent repair shops, and vehicle owners who need an affordable, direct-fit replacement for oxygen sensors on compatible Hyundai and Kia models. Choose this kit when you want OEM-style connectors, matched upstream\/downstream sensors, and the reassurance of a one-year quality guarantee for dependable emissions and fuel-trim feedback.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors fit my 2016 Hyundai Elantra 1.8L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This 2PCS set lists compatibility with the 2014–2016 Hyundai Elantra 1.8L as a direct-fit replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace both upstream and downstream sensors at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replacing both ensures matched readings and prevents future check-engine codes, though you can replace a single failed sensor if only one is defective.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"higherbro","offers":[{"title":"Default Title","offer_id":67586544795833,"sku":"B0G2KY9B25","price":119.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/higherbro-front-packaging-o2-sensors.jpg?v=1790486602"},{"product_id":"bosjinlai-o2-oxygen-sensor-kit-for-chevy-silverado-suburban-tahoe-2008-2014-upstream-downstream-direct-fit","title":"BOSJINLAI O2 Oxygen Sensor Kit for Chevy Silverado Suburban Tahoe (2008–2014) — Upstream \u0026 Downstream, Direct Fit","description":"\u003cp\u003e\u003cstrong\u003eHigh-precision BOSJINLAI oxygen sensors (upstream and downstream) replace worn units on Chevy, GMC, and Cadillac V8\/V6 trucks from 2008–2014 for reliable air-fuel feedback and smoother running.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your check engine light, fuel economy, or idle quality has changed, oxygen sensors are a common wear item on older GM trucks and SUVs. This BOSJINLAI kit includes upstream and downstream O2 sensors engineered to match OEM fitment for Chevrolet Silverado, Tahoe, Suburban, Avalanche, GMC Sierra and Yukon XL, and Cadillac Escalade models with 4.8L–6.2L engines across the 2008–2014 model years. Each sensor is built from durable materials, bench-tested, and designed for direct swap installation to restore accurate exhaust oxygen readings to the engine control module.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these BOSJINLAI O2 sensors affect engine performance?\u003c\/h3\u003e\n\n\u003cp\u003eOxygen sensors measure exhaust oxygen content so the engine computer can adjust fuel delivery. Fresh sensors deliver quicker, more consistent voltage responses, helping the ECU maintain proper air-fuel ratio and reducing hunting or rough idling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProvides faster signal response for improved fuel trims.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce unwanted fuel enrichment or lean conditions.\u003c\/li\u003e\n  \u003cli\u003eSupports stable idle and smoother throttle transitions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this set replace?\u003c\/h3\u003e\n\n\u003cp\u003eThese BOSJINLAI sensors are specified for a range of GM V8 and V6 trucks and SUVs from 2008–2014. They are intended as direct-fit replacements for many common GM O2 part numbers—check compatibility with your VIN before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Chevy: Silverado, Tahoe, Avalanche, Suburban 1500\/2500\/3500 HD (4.8L–6.2L).\u003c\/li\u003e\n  \u003cli\u003eFits GMC: Sierra, Yukon XL, 1500\/2500\/3500 HD (2008–2012 overlap models).\u003c\/li\u003e\n  \u003cli\u003eFits Cadillac Escalade 6.0L\/6.2L (2008–2014) and replaces OE numbers listed by your vehicle fit guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and testing details of BOSJINLAI sensors?\u003c\/h3\u003e\n\n\u003cp\u003eEach sensor is manufactured from selected materials and assembled to withstand under-hood heat and vibration. Before shipping, sensors are bench-tested so you receive parts that meet electrical and response specifications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDurable sensing element and protective shroud for extended life.\u003c\/li\u003e\n  \u003cli\u003ePre-tested for output consistency and rapid response time.\u003c\/li\u003e\n  \u003cli\u003eDesigned for bolt-in installation; plugs match factory connectors on compatible models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these O2 sensors myself, and what should I know?\u003c\/h3\u003e\n\n\u003cp\u003eThese sensors are offered as direct replacements for technicians and DIYers. Basic hand tools, anti-seize on threads (if not pre-applied), and a torque wrench for final tightening are recommended; avoid overtightening to protect the sensor housing and wiring.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for straightforward swap with factory harness.\u003c\/li\u003e\n  \u003cli\u003eRecommended clearance and heat-shield checks during install.\u003c\/li\u003e\n  \u003cli\u003eIf codes persist after fitment, recheck wiring, exhaust leaks, and ECU resets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and repair shops servicing 2008–2014 GM trucks and SUVs who need reliable replacement upstream and downstream oxygen sensors to restore accurate exhaust sensing and improve drivability. Choose this BOSJINLAI O2 sensor set if you want OE-style fitment, tested performance, and compatibility across common Silverado, Sierra, Tahoe, Suburban, Yukon, Avalanche, and Escalade V6\/V8 applications. Before purchase, confirm fitment with your vehicle's year, engine size, and VIN to ensure the proper sensor configuration for your model.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these BOSJINLAI sensors fit my 2010 Chevrolet Silverado 1500 5.3L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your Silverado is within the listed years and engine sizes; verify compatibility by entering your VIN or vehicle details before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these oxygen sensors come pre-tested?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, each BOSJINLAI sensor is bench-tested prior to shipping to ensure proper electrical output and response.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BOSJINLAI","offers":[{"title":"Default Title","offer_id":67586559738041,"sku":"B0G4W5MBXC","price":131.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bosjinlai-front-packaging-o2-sensors.jpg?v=1790486994"},{"product_id":"denso-o2-oxygen-sensor-234-4622-4-wire-12-6-harness-direct-fit-for-lexus-toyota-pontiac","title":"Denso O2 Oxygen Sensor 234-4622 — 4-Wire 12.6\" Harness, Direct-Fit for Lexus\/Toyota\/Pontiac","description":"\u003cstrong\u003eThe Denso 234-4622 is a direct-replacement narrow-band oxygen (O2) sensor with a 4-wire, 12.60-inch harness designed to restore accurate air-fuel monitoring on compatible Lexus, Toyota and Pontiac models.\u003c\/strong\u003e\n\n\u003cp\u003eThis replacement sensor is engineered to meet original-equipment tolerances so it installs cleanly and performs reliably. Built with corrosion-resistant stainless steel, a refined zirconia sensing element and Denso’s aluminum oxide trap layer, it resists contamination and responds quickly to changes in exhaust oxygen levels. The 234-4622 fits a wide range of vehicles — including select Lexus ES300\/ES300h and NX models, Pontiac Vibe, and many Toyota sedans, SUVs and coupes — making it a practical choice for routine maintenance or targeted repairs.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this sensor replace?\u003c\/h3\u003e\n\u003cp\u003eThe Denso 234-4622 is listed for many Lexus, Toyota and Pontiac applications across different years. It also cross-references several factory part numbers and aftermarket interchange codes for easy verification before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact Denso part: 234-4622\u003c\/li\u003e\n  \u003cli\u003eCompatible models include Lexus ES300 (1995–1998), ES300h (2013–2018), NX200t\/NX300\/NX300h (various years), Pontiac Vibe (2009–2010), Toyota Camry, Corolla, RAV4, Avalon, 4Runner, Matrix, Sienna, Solara, Paseo and Tercel across listed years.\u003c\/li\u003e\n  \u003cli\u003eParts interchange examples: 88975496, 8946502340, 8946533450 and other OEM cross-reference numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this Denso sensor protect the engine and improve drivability?\u003c\/h3\u003e\n\u003cp\u003eWhile it’s not a fix-all, a functioning oxygen sensor helps the engine control unit (ECU read) maintain correct air-fuel ratios, which supports smoother idle and consistent performance. Denso’s construction and filter features reduce the chance of sensor poisoning so it keeps accuracy longer than untreated elements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum oxide trap layer guards the ceramic element from silicone and lead contamination.\u003c\/li\u003e\n  \u003cli\u003ePTFE filtering helps block particles that can degrade sensor response.\u003c\/li\u003e\n  \u003cli\u003eRefined zirconia element yields faster, more precise oxygen readings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the 234-4622 easy to install and what are its physical details?\u003c\/h3\u003e\n\u003cp\u003eThis part is made as a direct fit replacement with a 4-wire harness and a 12.60-inch lead so it lines up with factory connectors in the specified vehicles. The sensor’s compact dimensions and stainless steel housing simplify installation and help it withstand the under-hood environment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWiring: 4-wire harness, 12.60 inches long for OEM connector compatibility.\u003c\/li\u003e\n  \u003cli\u003eConstruction: corrosion-resistant stainless steel housing for durability.\u003c\/li\u003e\n  \u003cli\u003eDimensions \u0026amp; weight: approx. 5.75 x 2.19 x 1.88 inches, 0.25 lb; sold individually.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I replace an oxygen sensor and what performance changes should I expect?\u003c\/h3\u003e\n\u003cp\u003eReplace a sensor if the vehicle shows a persistent check engine light tied to O2 sensor codes, rough idle, or if fuel economy noticeably worsens. Installing a correct, well-built replacement like the 234-4622 helps restore accurate oxygen monitoring and stabilize fuel trim adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon replacement triggers: diagnostic trouble codes, poor fuel economy, rough running or failed emissions tests.\u003c\/li\u003e\n  \u003cli\u003eExpected improvements: steadier idle, more consistent combustion control, and more reliable emission readings for diagnostics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Automotive technicians, DIY mechanics and fleet managers who need a dependable, OE-quality narrow-band oxygen sensor for select Lexus, Toyota and Pontiac vehicles. If you require a precise fit, OEM cross-reference compatibility and contamination protection in a long-lasting sensor, the Denso 234-4622 is built for routine maintenance and targeted repairs where OEM-level performance is expected.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the 234-4622 fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check the listed year\/make\/model compatibility and OEM cross-reference numbers; match your vehicle’s original part number to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sensor require programming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is needed—this is a direct-fit replacement with a factory-style 4-wire harness for plug-and-play installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Denso","offers":[{"title":"Default Title","offer_id":67586560852153,"sku":"B000C5SGA4","price":145.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/denso-234-4622-front-view.jpg?v=1790487042"},{"product_id":"htmxja-oxygen-o2-sensors-for-2005-2006-honda-cr-v-l4-2-4l-2-piece-upstream-downstream-replacement-oe-reference-fit","title":"HTMXJA Oxygen O2 Sensors for 2005-2006 Honda CR-V L4 2.4L — 2-Piece Upstream \u0026 Downstream Replacement, OE-Reference Fit","description":"\u003cp\u003e\u003cstrong\u003eHTMXJA 2Pcs upstream and downstream oxygen sensors replace the factory O2 units for 2005–2006 Honda CR-V 2.4L engines to restore accurate air-fuel sensing and emission regulation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two replacement oxygen sensors are designed to match the referenced OE numbers and fit the L4 2.4L CR-V models from 2005 and 2006. They monitor exhaust oxygen content both before and after the catalytic converter, providing the engine control module with the data needed to adjust fuel delivery and help keep emissions within design targets. Each sensor arrives with a threaded housing, wiring harness connector, and protective elements engineered for typical automotive conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these O2 sensors affect drivability and fuel management?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn oxygen sensors can help the engine computer make better real-time adjustments to fuel mixture, which may improve throttle response and reduce uneven idling. Sensors that read closer to expected values enable more consistent combustion trims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides fresh input to the engine control module for accurate fuel trims\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize idle and responsiveness under load\u003c\/li\u003e\n  \u003cli\u003eCan reduce excess fuel usage caused by a faulty sensor reading\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these sensors compatible with my 2005–2006 Honda CR-V?\u003c\/h3\u003e\n\u003cp\u003eThese HTMXJA oxygen sensors are specified for Honda CR-V L4 2.4L models from 2005 and 2006 and match the OE reference numbers commonly associated with those vehicles. Always verify part numbers and connector types against your vehicle before ordering to confirm fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 2005–2006 CR-V with 2.4L L4 engines\u003c\/li\u003e\n  \u003cli\u003eCross-references OE numbers: 250-241123, 250241123, 250-54046, 25054046\u003c\/li\u003e\n  \u003cli\u003eUpstream and downstream sensors included to replace both bank positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable working under the vehicle: disconnect the old sensor, unplug the connector, remove the threaded unit, and install the replacement. Use the correct torque on the sensor thread and check for secure electrical connections; no special tuning is required after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical hand tools and an oxygen-sensor socket or wrench are sufficient\u003c\/li\u003e\n  \u003cli\u003eReconnect wiring harness and secure any protective sleeves\u003c\/li\u003e\n  \u003cli\u003eNo ECU reprogramming needed; ECU will relearn from new sensor signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does HTMXJA provide?\u003c\/h3\u003e\n\u003cp\u003eHTMXJA backs these oxygen sensors with a six-month warranty and offers customer support for fitment questions or product concerns. If the product does not meet expectations, HTMXJA requests contact so they can assist and respond within 24 hours.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix-month limited warranty included\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for compatibility checks before purchase\u003c\/li\u003e\n  \u003cli\u003eSupport response typically within 24 hours for replacements or troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These replacement oxygen sensors suit DIY car owners, independent repair shops, and fleet technicians who maintain 2005–2006 Honda CR-V vehicles with the 2.4L L4 engine and need both upstream and downstream units. They are intended for buyers who want an OE-referenced substitute that restores proper oxygen sensing without modifying engine management systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors fit both upstream and downstream positions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This kit includes two sensors intended to replace both upstream and downstream positions on 2005–2006 CR-V 2.4L models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is any ECU programming required after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is necessary; the vehicle computer will relearn values from the new sensors during normal operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HTMXJA","offers":[{"title":"Default Title","offer_id":67586562097337,"sku":"B0DP1ZCRBP","price":117.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/htmxja-front-packaging-oxygen-sensors.jpg?v=1790487110"},{"product_id":"yaopei-o2-oxygen-sensor-4-pack-for-chevrolet-gmc-v8-1996-2002-2x234-4012-2x234-4018-direct-fit-stainless-steel","title":"YAOPEI O2 Oxygen Sensor 4-Pack for Chevrolet GMC V8 1996-2002 (2x234-4012 + 2x234-4018) — Direct-Fit Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003eYAOPEI 4-pack oxygen sensors replace upstream and downstream units (2 x 234-4012 + 2 x 234-4018) for many Chevrolet, GMC and select Cadillac V8 models from 1996–2002.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit provides a complete set of front and rear O2 sensors engineered as direct-fit replacements for a wide range of trucks, SUVs and vans. Each sensor is made with stainless steel housings and anti-oxidant coatings for corrosion resistance and stable performance at high exhaust temperatures. The set includes two upstream (pre-catalyst) and two downstream (post-catalyst) units so you can restore original-style sensor coverage in one service visit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and years does this YAOPEI O2 sensor kit serve?\u003c\/h3\u003e\n\n\u003cp\u003eThe 4-pack is designed to fit many Chevrolet and GMC full-size trucks, SUVs and vans from the late 1990s through the early 2000s, plus some Cadillac Escalade models. Compatibility lists include specific model ranges—verify your vehicle year, make, model and engine before ordering to ensure a correct match.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Avalanche, C\/K trucks, Silverado, Suburban, Tahoe, Express vans (various years 1996–2002)\u003c\/li\u003e\n  \u003cli\u003eGMC: C\/K trucks, Sierra, Yukon\/Yukon XL, Savana vans (1996–2002 ranges)\u003c\/li\u003e\n  \u003cli\u003eCadillac: Escalade V8 5.7 (1999–2000) and V8 5.3 (2002)\u003c\/li\u003e\n  \u003cli\u003eCheck interchange numbers 9617178, 234-4012, SG454, SG236, 13474, 234-4018 for guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these replacement sensors compare to OEM units?\u003c\/h3\u003e\n\n\u003cp\u003eYAOPEI oxygen sensors are built to meet the fit and function of original equipment using durable stainless steel housings and protective coatings. They are laser-welded and sealed against moisture to improve longevity in harsh exhaust environments, while response characteristics are tuned for reliable signal switching.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDual laser-welded stainless steel construction for leak-free housings\u003c\/li\u003e\n  \u003cli\u003eAnti-oxidant coating to resist corrosion and high-temperature degradation\u003c\/li\u003e\n  \u003cli\u003eTested before packing to ensure proper electrical and sensing response\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on design — no cutting, splicing or reprogramming required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing these O2 sensors?\u003c\/h3\u003e\n\n\u003cp\u003eBefore purchase and installation, confirm the sensor plug, thread size and connector shape match your factory parts. Inspect interchange part numbers and compare product photos to your vehicle’s existing sensors; differences in plug or wiring can prevent fitment even when fitment lists match your model year.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirm year\/make\/model\/position and cross-reference listed part numbers\u003c\/li\u003e\n  \u003cli\u003eCompare the connector plug in the product photos to your vehicle’s harness plug\u003c\/li\u003e\n  \u003cli\u003eReplace sensors in pairs (upstream\/downstream) per bank where recommended\u003c\/li\u003e\n  \u003cli\u003eUse anti-seize on threads only if specified by install instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what does the package include?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable working under the vehicle with basic hand tools. These sensors are supplied as a set of four—two upstream and two downstream—so you can complete a full sensor refresh for many dual-bank engines without multiple orders.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePackage contains 4 PCS: 2 x 234-4018 and 2 x 234-4012 (2 front, 2 rear)\u003c\/li\u003e\n  \u003cli\u003eStraight bolt-on replacement—no vehicle modification required\u003c\/li\u003e\n  \u003cli\u003ePre-tested units reduce risk of out-of-box failures\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle service manual torque and sensor removal guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 4-pack is intended for owners and technicians who need a full bank refresh of oxygen sensors on late-1990s to early-2000s Chevrolet, GMC or compatible Cadillac V8 vehicles. It’s a practical choice for fleet maintenance, DIY truck or SUV owners, and repair shops seeking direct-fit, corrosion-resistant replacements that match common OEM interchange numbers. If you aren’t certain about fitment, confirm connector type and part numbers before purchase or contact us for assistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both front and rear oxygen sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains four sensors: two upstream (front) and two downstream (rear).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How can I confirm these sensors fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your year\/make\/model and compare the connector plug and interchange numbers listed before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YAOPEI","offers":[{"title":"Default Title","offer_id":67586563178681,"sku":"B0B2QQPSDB","price":125.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yaopei-front-sensor-pair.jpg?v=1790487176"},{"product_id":"qiybone-o2-oxygen-sensors-for-toyota-2-5l-2-pack-upstream-downstream-oem-fit-stainless-steel","title":"QIYBONE O2 Oxygen Sensors for Toyota 2.5L — 2‑Pack Upstream \u0026 Downstream, OEM Fit Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003eQIYBONE O2 sensors are a two-piece upstream and downstream replacement set engineered to restore accurate air‑fuel monitoring for compatible Toyota, Lexus and Scion 2.5L four‑cylinder models from 2011–2018.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 2‑pack includes one upstream (pre‑cat) and one downstream (post‑cat) oxygen sensor manufactured from stainless steel and heat‑resistant materials to withstand under‑hood conditions. Designed to meet OEM fit and electrical specifications, the sensors plug into existing vehicle harnesses and help the engine control unit (ECU) read exhaust oxygen levels for better fuel trim and emissions control. Reference OE numbers are provided so you can verify fitment against your original parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors report the amount of oxygen in exhaust gases so the ECU can adjust fuel delivery. Replacing worn or failing sensors returns accurate feedback to the engine management system, which helps stabilize idle, reduce excess fuel use, and maintain smoother acceleration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct air‑fuel ratio readings for precise fuel trims\u003c\/li\u003e\n  \u003cli\u003eReduces rough idling and hesitation caused by faulty sensor data\u003c\/li\u003e\n  \u003cli\u003eHelps maintain catalytic converter efficiency by ensuring proper combustion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers are compatible with this QIYBONE set?\u003c\/h3\u003e\n\u003cp\u003eThis pair fits Toyota Camry (2012–2017) 2.5L L4, Toyota Avalon (2013–2018) 2.5L L4, Toyota RAV4 (2013–2018) 2.5L L4 (non‑hybrid), Scion tC (2011–2016) 2.5L, and Lexus ES300h (2013–2018) 2.5L. Cross‑reference the supplied OE and aftermarket numbers before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream reference: 250‑54084, 350‑64031, OS5579 and equivalents\u003c\/li\u003e\n  \u003cli\u003eDownstream reference: 250‑24360, 234‑4622, ES20327 and related numbers\u003c\/li\u003e\n  \u003cli\u003eCompare connector shape and pin count to your original sensor picture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and durability features of these sensors?\u003c\/h3\u003e\n\u003cp\u003eQIYBONE sensors use stainless steel housings and high‑temperature materials in the sensing element and seals to resist corrosion and heat cycling. The double protection design and quality sealing extend service life compared with lower‑grade replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel body resists rust and mechanical damage\u003c\/li\u003e\n  \u003cli\u003eHigh‑temperature resistant internals tolerate exhaust heat and contaminants\u003c\/li\u003e\n  \u003cli\u003eFactory‑style sealing and plug ensure a weatherproof connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what should I check first?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be plug‑and‑play following OEM layout: unplug the old sensor, remove it with the correct socket, and install the new unit. Always compare the connector, thread pitch and sensor length to the original part before installation to avoid mismatch.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to OEM dimensions for direct replacement\u003c\/li\u003e\n  \u003cli\u003eRequires common tools like an O2 sensor socket or wrench\u003c\/li\u003e\n  \u003cli\u003eVerify electrical connector and sensor thread match your vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This QIYBONE oxygen sensor pair is aimed at owners and independent mechanics servicing compatible Toyota, Lexus and Scion 2.5L four‑cylinder models who need a reliable, cost‑effective replacement for failing upstream or downstream O2 sensors. It’s suitable for drivers troubleshooting check‑engine P013x\/P014x or lean\/rich fuel trim codes, fleets maintaining older cars, and DIYers who prefer OEM‑style fitment without dealer prices.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors fit my 2015 Toyota Camry 2.5L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This QIYBONE 2‑pack includes sensors compatible with 2012–2017 Camry 2.5L models; verify connector and OE number match your original.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sensors direct replacements or do they require programming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed as direct OEM‑style replacements and do not require programming—just physical installation and clearing any stored codes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QIYBONE","offers":[{"title":"Default Title","offer_id":67586563670201,"sku":"B0GGJ1SBRY","price":125.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/qiybone-front-packaging-oxygen-sensor.jpg?v=1790487196"},{"product_id":"a-premium-oxygen-sensor-pair-for-acura-tsx-honda-accord-2-4l-upstream-downstream-4-wire-heated-m18","title":"A-Premium Oxygen Sensor Pair for Acura TSX \u0026 Honda Accord 2.4L — Upstream \u0026 Downstream 4‑Wire Heated M18","description":"\u003cp\u003e\u003cstrong\u003eThe A-Premium Upstream and Downstream O2 Oxygen Sensor pair replaces factory units to restore accurate air-fuel readings for Acura TSX 2009–2013 and Honda Accord 2008–2012 2.4L engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two heated oxygen sensors from A-Premium are designed as direct-fit replacements for the upstream (pre-catalytic) and downstream (post-catalytic) positions on compatible Acura and Honda 2.4L inline-4 models. Built with a 4-wire heated design and standard M18 threaded mounting, the set delivers the electrical and physical compatibility needed for hassle-free swapping with OE-style connectors and proven reference numbers.\u003c\/p\u003e\n\n\u003ch3\u003eWill this sensor set fit my Acura TSX or Honda Accord?\u003c\/h3\u003e\n\u003cp\u003eThe A-Premium pair is specifically made for Acura TSX 2009–2013 and Honda Accord 2008–2012 with the L4 2.4L engine. Check the part reference numbers and connector style against your vehicle to confirm fitment before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Acura TSX (2009–2013) and Honda Accord (2008–2012) L4 2.4L\u003c\/li\u003e\n  \u003cli\u003eOE reference numbers: 36532-R40-A01 \/ 250-24833 \/ 250-54110\u003c\/li\u003e\n  \u003cli\u003eConnector: female, 4-wire heated configuration\u003c\/li\u003e\n  \u003cli\u003eThread: standard M18 threaded mounting for direct replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these sensors improve engine performance and diagnostics?\u003c\/h3\u003e\n\u003cp\u003eAccurate oxygen sensors help the engine control unit (ECU make better fuel-trim adjustments by measuring exhaust oxygen before and after the catalytic converter. Replacing worn sensors with correct-spec units restores sensor responsiveness and can reduce rough idling, poor fuel economy, and false emissions readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream sensor monitors exhaust oxygen for fuel control\u003c\/li\u003e\n  \u003cli\u003eDownstream sensor checks catalytic converter efficiency\u003c\/li\u003e\n  \u003cli\u003eHeated design reduces warm-up time for faster accurate readings\u003c\/li\u003e\n  \u003cli\u003eReturn to correct fuel trims and more reliable emissions diagnostics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical details I should know before installing?\u003c\/h3\u003e\n\u003cp\u003eEach kit includes two threaded, heated oxygen sensors with female connectors and 4 wires. Wire lengths differ for proper location—about 350mm for the upstream sensor and 250mm for the downstream—so routing and connector reach match factory harnesses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains: 2x oxygen sensors in box packaging\u003c\/li\u003e\n  \u003cli\u003eWire count: 4 wires per sensor (heated type)\u003c\/li\u003e\n  \u003cli\u003eLengths: upstream ≈ 350 mm, downstream ≈ 250 mm\u003c\/li\u003e\n  \u003cli\u003eThread size: M18 for OE-style mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable are these sensors and what warranty is included?\u003c\/h3\u003e\n\u003cp\u003eA-Premium builds these sensors from durable materials intended to meet long-term underhood exposure and thermal cycles. The set is supported by a one-year unlimited-mileage guarantee for buyer confidence, and the product ships in protective box packaging for safe delivery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable construction to withstand exhaust conditions\u003c\/li\u003e\n  \u003cli\u003eQuick, tool-minimal installation replicates factory fit\u003c\/li\u003e\n  \u003cli\u003eBacked by A-Premium one-year unlimited-mileage warranty\u003c\/li\u003e\n  \u003cli\u003eBox packaging protects components in transit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This A-Premium oxygen sensor pair is aimed at do-it-yourself mechanics, independent repair shops, and vehicle owners who need an exact-fit replacement for their Acura TSX (2009–2013) or Honda Accord (2008–2012) 2.4L. It’s suited for anyone troubleshooting check-engine codes related to O2 sensors or catalytic performance, or those restoring fuel economy and emissions operation to factory-like behavior without complex modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors fit my 2010 Honda Accord 2.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this A-Premium upstream and downstream sensor pair fits 2008–2012 Honda Accord 2.4L models, including 2010, with the correct 4-wire female connectors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the wiring heated and what are the lengths?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Both sensors are 4-wire heated types. The upstream cable is about 350mm and the downstream cable about 250mm for proper factory routing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67586568519865,"sku":"B0C1B8NWGC","price":146.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-upstream-downstream-front-view.jpg?v=1790487423"},{"product_id":"qiybone-4-piece-o2-oxygen-sensor-kit-for-gm-3-6l-v6-2012-2020-upstream-downstream-oem-fit","title":"QIYBONE 4-Piece O2 Oxygen Sensor Kit for GM 3.6L V6 (2012–2020) – Upstream \u0026 Downstream, OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eQIYBONE 4-piece oxygen sensor kit replaces upstream and downstream O2 sensors (234-4565, 234-4566 and related OE numbers) for 3.6L Chevy, GMC, Buick and Cadillac models from 2012–2020.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese four O2 sensors are precision-engineered to match OEM fit and function for a range of V6 3.6L engines, helping the engine control module monitor air\/fuel ratios and maintain efficient combustion. Constructed with stainless-steel housings and high-temperature materials, the sensors use proven sensing elements and sealed connectors for durability in exhaust-system conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engine years does this sensor kit support?\u003c\/h3\u003e\n\u003cp\u003eThis kit is compatible with many GM 3.6L V6 models across Chevrolet, GMC, Buick and Cadillac lines from 2012 through 2020. Confirm compatibility by matching your vehicle model, year and the original sensor location (upstream vs downstream) before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevy Impala 3.6L (2014–2020), Traverse 3.6L (2012–2017), Colorado 3.6L (2015–2016), Caprice 3.6L (2012–2017)\u003c\/li\u003e\n  \u003cli\u003eGMC Acadia 3.6L (2012–2016), Canyon 3.6L (2015–2016)\u003c\/li\u003e\n  \u003cli\u003eBuick Enclave 3.6L (2012–2017), Cadillac XTS 3.6L (2013–2019)\u003c\/li\u003e\n  \u003cli\u003eMatches OE\/reference numbers like 234-4565, 234-4566, 250-24773 and others listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these QIYBONE oxygen sensors affect fuel economy and engine performance?\u003c\/h3\u003e\n\u003cp\u003eO2 sensors measure exhaust oxygen levels and relay that data to the vehicle’s engine control unit so fuel delivery can be adjusted. Accurate, responsive sensors help the ECU keep the air\/fuel ratio near optimum, which can improve fuel economy and throttle response when sensors are working correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast response sensing helps reduce rich or lean running conditions\u003c\/li\u003e\n  \u003cli\u003eBetter air\/fuel control can lower fuel consumption over time\u003c\/li\u003e\n  \u003cli\u003eStable readings support smoother idling and consistent acceleration\u003c\/li\u003e\n  \u003cli\u003eDurable materials sustain performance in high-temperature exhaust environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and installation details?\u003c\/h3\u003e\n\u003cp\u003eQIYBONE sensors are manufactured with stainless-steel shells and high-temp resistant internals for corrosion and heat protection. They are designed to OEM dimensions and use standard connectors for a plug-and-play replacement in most cases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless-steel housing and double-sealing for long life\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature materials for sensing element longevity\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play electrical connector—compare your original plug to the product image\u003c\/li\u003e\n  \u003cli\u003eSold as a set of four to cover upstream and downstream positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich OE\/reference numbers does this kit replace and why match them?\u003c\/h3\u003e\n\u003cp\u003eThe kit lists multiple OE and reference numbers so you can cross-check against your vehicle’s original part number. Matching the reference number ensures correct thread, connector type and sensing characteristics for your exhaust layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon cross-references: 234-4565, 234-4566, 250-24773, 350-34003\u003c\/li\u003e\n  \u003cli\u003eAlso replaces numbers like 234-4259, 234-4818, 234-4840 and others shown\u003c\/li\u003e\n  \u003cli\u003eVerify with the original sensor on your vehicle before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This QIYBONE 4PCS oxygen sensor kit is for owners and mechanics who need a complete upstream and downstream sensor replacement for GM 3.6L vehicles built between 2012 and 2020. Choose this set if you want OEM-style fitment, stainless-steel construction and a full-vehicle replacement to restore accurate air\/fuel monitoring and avoid diagnostic trouble codes related to oxygen sensors.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2015 Chevy Impala 3.6L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this 4-piece kit lists compatibility with Chevy Impala 3.6L models from 2014–2020; match the original sensor connector to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors require programming or a special tool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is typically required; they are plug-and-play. Use basic hand tools and compare connectors before installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QIYBONE","offers":[{"title":"Default Title","offer_id":67586589229241,"sku":"B0GMVW4VDJ","price":146.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/qiybone-front-view-oxygen-sensor-kit.jpg?v=1790487766"},{"product_id":"tlyzscgkzy-o2-oxygen-sensor-kit-for-honda-2-4l-l4-upstream-downstream-pair-accord-cr-v-ilx-tlx","title":"TLYZSCGKZY O2 Oxygen Sensor Kit for Honda 2.4L L4 — Upstream \u0026 Downstream Pair (Accord\/CR-V\/ILX\/TLX)","description":"\u003cp\u003e\u003cstrong\u003eTwo high-precision upstream and downstream O2 oxygen sensors designed to restore accurate air-fuel monitoring for 2.4L L4 Honda Accord, CR-V and select Acura ILX\/TLX models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two-piece oxygen sensor replacements from TLYZSCGKZY are engineered to match the fit and function of OEM units used across multiple 2013–2021 Accord, CR-V, ILX and TLX vehicles with the 2.4L inline-four. Built to detect exhaust oxygen levels precisely, they supply the engine control unit (ECU) with the data needed to adjust fuel delivery and combustion timing. The pair includes both upstream (pre-catalytic converter) and downstream (post-catalytic converter) sensors and is cross-referenced to common part numbers like 234-9131 and 234-4980\/234-4574 for easier compatibility checks.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these O2 sensors affect daily driving and fuel use?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors measure the amount of oxygen in exhaust gases so the ECU can trim fuel mixture. When sensors operate within spec, they help maintain efficient combustion, which can improve throttle response and steady fuel economy. Replacing aging sensors prevents prolonged rich or lean running that can increase emissions and wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream sensor provides real-time air-fuel ratio feedback to the ECU.\u003c\/li\u003e\n  \u003cli\u003eDownstream sensor verifies catalytic converter efficiency.\u003c\/li\u003e\n  \u003cli\u003eAccurate sensing helps stabilize idling and transient throttle behavior.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these parts fit my specific vehicle year and engine?\u003c\/h3\u003e\n\u003cp\u003eThis 2-piece kit is intended for 2.4L L4 engine applications in specified model years: Honda Accord (2013–2017), Honda CR-V (2015–2019), Acura ILX (2016–2021) and Acura TLX (2015–2020). Compatibility is based on matching factory-style connectors and mounting threads, and the sensors replace common OEM numbers. Always cross-check your vehicle’s existing part numbers or VIN fitment tool before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces upstream numbers including 234-9131 and several OEM suffixes.\u003c\/li\u003e\n  \u003cli\u003eReplaces downstream numbers including 234-4980 and 234-4574 equivalents.\u003c\/li\u003e\n  \u003cli\u003eDesigned for 2.4L inline-four engine configurations only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes these sensors dependable and easy to install?\u003c\/h3\u003e\n\u003cp\u003eTLYZSCGKZY sensors are manufactured from durable materials and undergo performance testing to ensure they deliver stable readings under normal driving conditions. The wiring harness and connector match common OEM interfaces so installation is straightforward for anyone with basic tools. Quick replacement helps you return the vehicle to normal operation without lengthy workshop time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable construction to withstand exhaust heat and vibration.\u003c\/li\u003e\n  \u003cli\u003eTested to detect air-fuel mixture changes accurately.\u003c\/li\u003e\n  \u003cli\u003eOEM-compatible connector and thread size for quick swap-out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm these sensors are the right choice before purchase?\u003c\/h3\u003e\n\u003cp\u003eCheck your vehicle’s service manual, the part number on the existing sensor, or use your VIN with a fitment lookup to confirm compatibility. The listing cross-references popular OEM numbers such as 36531-5A2-A01 and 36532-5A2-A01 to simplify matching. If your car uses a different engine size or connector, a different sensor family may be required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare the old sensor’s part number to the listed replacements.\u003c\/li\u003e\n  \u003cli\u003eVerify vehicle model year and engine displacement: 2.4L L4.\u003c\/li\u003e\n  \u003cli\u003eUse VIN-based part lookups when in doubt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This two-piece O2 sensor kit is aimed at owners and technicians who maintain 2.4L L4 Honda Accord or CR-V models (2013–2019) or Acura ILX\/TLX vehicles (2015–2021) and need a reliable upstream and downstream replacement to restore proper engine management, emissions control and fuel economy. It’s a straightforward upgrade for DIY mechanics with socket tools and a basic understanding of exhaust components, and a cost-effective spare for independent shops handling routine sensor replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors fit my 2016 Honda Accord 2.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This 2-piece kit covers 2013–2017 Honda Accord models with the 2.4L L4 engine; confirm by matching the old sensor part number.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation complicated for a DIYer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The sensors use OEM-style connectors and standard threads; basic hand tools and a socket for sensor removal are usually sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TLYZSCGKZY","offers":[{"title":"Default Title","offer_id":67586601287865,"sku":"B0GKWL5HD8","price":117.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tlyzscgkzy-front-packaging-o2-sensors.jpg?v=1790487939"},{"product_id":"ntk-oxygen-sensor-23162-direct-fit-vehicle-specific-o2-sensor-oem-connector-durable-construction","title":"NTK Oxygen Sensor 23162 — Direct-Fit Vehicle-Specific O2 Sensor, OEM Connector \u0026 Durable Construction","description":"\u003cp\u003e\u003cstrong\u003eThe NTK 23162 Oxygen Sensor is a vehicle-specific, direct-fit replacement sensor engineered to monitor exhaust oxygen levels and interface precisely with your vehicle’s factory engine management system.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt to OEM dimensions and connectors, the NTK 23162 is designed with exact wire lengths, grommet types, protective sleeves and mounting features to match a particular vehicle application. NTK develops sensor technology to meet the tolerances and response characteristics modern engine computers expect, while using durable materials to resist corrosion and abrasion in harsh under-hood environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the NTK 23162 ensure a correct fit for my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe NTK 23162 is manufactured to match the original equipment configuration for a targeted vehicle application. That means the connector type, terminal layout, wire length and protective grommets are made to plug in and mount without modification. Using the right fit reduces installation time and the chance of connector or sealing issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle-specific connector and pinout for plug-and-play installation\u003c\/li\u003e\n  \u003cli\u003eExact wire length and routing to match factory harness runs\u003c\/li\u003e\n  \u003cli\u003eOEM-style grommets and clips for correct sealing and mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction protect the sensor from damage?\u003c\/h3\u003e\n\u003cp\u003eNTK designs the 23162 with corrosion- and abrasion-resistant materials to survive exposure to exhaust heat, road salts and mechanical wear. Protective sleeves and a robust sensor tube help shield the sensing element and wiring from contaminants and vibration. This construction supports consistent performance throughout the sensor’s service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable sensor housing and protective sleeve against debris\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant coatings to withstand road chemicals\u003c\/li\u003e\n  \u003cli\u003eReinforced wiring and strain relief to resist vibration failure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the sensor actually measure and how does that affect my engine?\u003c\/h3\u003e\n\u003cp\u003eThe oxygen sensor monitors the residual oxygen content in exhaust gases, providing voltage or signal changes the engine control unit uses to adjust fuel delivery. Accurate oxygen readings help the computer maintain an appropriate air–fuel ratio under varying driving conditions. Replacing a failing sensor restores reliable feedback for emissions control and fuel management systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasures exhaust oxygen levels for ECU feedback\u003c\/li\u003e\n  \u003cli\u003eHelps maintain correct air–fuel ratios during operation\u003c\/li\u003e\n  \u003cli\u003eSupports emissions control components like catalytic converters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is replacing the NTK 23162 myself?\u003c\/h3\u003e\n\u003cp\u003eFor many DIYers and professional technicians, replacing a vehicle-specific oxygen sensor is a straightforward repair when the correct sensor is used. Because NTK matches OEM connections and mounting, installation often requires only basic hand tools and anti-seize where recommended. Always consult vehicle service information for torque values and safety precautions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for plug-and-play swap with factory harness\u003c\/li\u003e\n  \u003cli\u003eStandard sensor socket or wrench typically required\u003c\/li\u003e\n  \u003cli\u003eRefer to vehicle manual for torque and anti-seize guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The NTK 23162 is intended for vehicle owners and technicians seeking a direct-fit, OEM-matching oxygen sensor replacement for a specific make and model. It suits anyone who wants a durable, corrosion-resistant sensor engineered to work with modern engine management systems and to restore correct exhaust oxygen feedback without routing or wiring modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the NTK 23162 a direct replacement for my factory sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—NTK 23162 is vehicle-specific and built to match OEM connector, wire length, and mounting for plug-and-play replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor improve fuel economy?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A properly functioning oxygen sensor helps the ECU optimize fuel trim; replacing a faulty sensor can restore normal fuel management.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"NTK","offers":[{"title":"Default Title","offer_id":67586603974841,"sku":"B00HYDND7I","price":125.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ntk-23162-front-view-sensor.jpg?v=1790488003"},{"product_id":"higherbro-oxygen-sensor-kit-4pcs-for-2001-2010-ford-explorer-4-0-4-6-5-0-upstream-downstream-stainless-steel","title":"higherbro Oxygen Sensor Kit 4PCS for 2001–2010 Ford Explorer 4.0\/4.6\/5.0 — Upstream \u0026 Downstream, Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003ehigherbro 4PCS Oxygen Sensor kit delivers two upstream and two downstream replacement sensors engineered for fitment on many Ford, Lincoln, Mercury and Mazda V6\/V8 engines from 1998–2011.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis four-piece sensor set includes two upstream (pre-catalytic) and two downstream (post-catalytic) oxygen sensors constructed from stainless steel and aluminum-oxide sensing elements for corrosion resistance and consistent electrical output. Designed as flange-mounted direct-fit replacements, these sensors restore oxygen-sensing feedback to the engine control unit (ECU) and are sold with a one-year quality guarantee. Always verify vehicle compatibility by using the \"Select Your Vehicle\" tool and matching year, make, model, engine and any special notes before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines are these higherbro sensors compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThese sensors cover a broad range of Ford family vehicles plus selected Lincoln, Mercury and Mazda models. Compatibility includes many common F-Series trucks, Explorers, Expeditions, Crown Victorias and multiple vans, as listed on the fitment information.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits 2001–2010 Ford Explorer: 4.0L, 4.6L, and 5.0L configurations where specified.\u003c\/li\u003e\n  \u003cli\u003eCompatible with F-150\/F-250\/F-350 (selected years and engines), E-Series vans, Excursion, Edge and Ranger models noted in the fit list.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Lincoln Navigator\/Town Car, Mercury Grand Marquis\/Mountaineer and Mazda B\/CX models shown in the product fit notes.\u003c\/li\u003e\n  \u003cli\u003eDouble-check engine displacement and production year using the \"Select Your Vehicle\" feature before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do upstream and downstream sensors differ and why are both included?\u003c\/h3\u003e\n\n\u003cp\u003eUpstream sensors sit before the catalytic converter and give the ECU real-time fuel\/air mixture data; downstream sensors monitor converter efficiency after the catalyst. This kit supplies both types so you can replace the full bank of worn sensors, ensuring accurate readings across the entire exhaust system.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUpstream (pre-cat) sensors provide rapid feedback for fuel trim adjustments.\u003c\/li\u003e\n  \u003cli\u003eDownstream (post-cat) sensors check catalytic converter performance and emissions control.\u003c\/li\u003e\n  \u003cli\u003eReplacing all four at once avoids mixed old\/new sensor readings and simplifies diagnostics.\u003c\/li\u003e\n  \u003cli\u003eFlange-mounted design matches factory mounting points for direct fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and compatibility features of these sensors?\u003c\/h3\u003e\n\n\u003cp\u003eThe sensors use stainless steel housing with aluminum-oxide sensing elements to resist heat and corrosion while producing stable electrical signals. They are intended as direct replacement parts that output compatible voltage or signal patterns for the vehicle’s original ECU logic.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRobust stainless steel housing for heat and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eAluminum-oxide sensing tip for consistent sensor performance.\u003c\/li\u003e\n  \u003cli\u003eFlange-mounted construction mirrors OEM installation points.\u003c\/li\u003e\n  \u003cli\u003eElectrical outputs engineered for modern engine management systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I consider when installing or replacing these oxygen sensors?\u003c\/h3\u003e\n\n\u003cp\u003eCorrect vehicle matching, clean mounting surfaces and appropriate torque are key to a secure, leak-free installation. If you’re unsure about wiring or ECU codes, consult a mechanic — replacing sensors without addressing underlying exhaust or engine issues can cause repeat failures.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirm fit using make, model, year and engine notes before purchase.\u003c\/li\u003e\n  \u003cli\u003eUse anti-seize on threads if recommended and torque to factory specs to avoid damage.\u003c\/li\u003e\n  \u003cli\u003eInspect exhaust manifold\/catalytic converter and wiring connectors for damage before fitting new sensors.\u003c\/li\u003e\n  \u003cli\u003eClear related ECU codes after installation to confirm proper operation and readiness tests.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and professional technicians who need a complete set of front and rear oxygen sensors for Ford, Lincoln, Mercury or compatible Mazda vehicles from the late 1990s through early 2010s. This kit is well suited for owners performing scheduled maintenance, restoring correct sensor feedback after emissions faults, or replacing multiple failed sensors at once to ensure consistent ECU readings and simplify diagnostics.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this 4-piece set include both upstream and downstream sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit contains two upstream (pre-cat) and two downstream (post-cat) oxygen sensors for complete bank replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is there a warranty with the higherbro oxygen sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — these sensors include a one-year quality guarantee from higherbro.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"higherbro","offers":[{"title":"Default Title","offer_id":67586631991481,"sku":"B09YM23D61","price":140.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/higherbro-sensor-set-front-packaging.jpg?v=1790488642"},{"product_id":"sdyyds-o2-sensor-kit-for-2006-2015-honda-civic-1-8l-l4-2pcs-upstream-downstream-direct-fit","title":"SDYYDS O2 Sensor Kit for 2006–2015 Honda Civic 1.8L L4 — 2PCS Upstream \u0026 Downstream Direct Fit","description":"\u003cstrong\u003eSDYYDS two-piece oxygen sensor kit replaces both upstream and downstream O2 sensors for 2006–2015 Honda Civic 1.8L L4, restoring accurate air-fuel monitoring and emissions control.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Civic is showing a check engine light, rough idle, or reduced fuel economy, worn oxygen sensors are a common cause. This SDYYDS kit contains both the upstream (pre-catalytic) and downstream (post-catalytic) O2 sensors—part numbers 234-9124 and 234-4350—engineered for direct replacement on 2006–2015 Honda Civic models with the 1.8L L4 engine. Designed as plug-and-play units, they aim to match or exceed original equipment performance while simplifying installation and minimizing downtime.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors affect my Civic’s performance?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors measure exhaust oxygen levels so the engine control unit (ECU) can adjust fuel delivery. Faulty sensors can lead to inaccurate fuel trim, higher emissions, and degraded throttle response.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream sensor (234-9124) monitors exhaust before the catalytic converter for real-time air-fuel corrections.\u003c\/li\u003e\n  \u003cli\u003eDownstream sensor (234-4350) verifies catalytic converter efficiency after the catalyst.\u003c\/li\u003e\n  \u003cli\u003eReplacing both sensors at once helps the ECU relearn accurate fuel maps faster.\u003c\/li\u003e\n  \u003cli\u003eProperly functioning O2 sensors support more stable idle and improved fuel economy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult for a DIY mechanic?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward: the SDYYDS sensors use a plug-and-play connector and standard thread sizes to match OEM mounting points. Basic hand tools and an O2 sensor socket are usually all that’s needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit connectors eliminate splicing or wiring modifications.\u003c\/li\u003e\n  \u003cli\u003eThreaded housings match factory mounting locations for a secure fit.\u003c\/li\u003e\n  \u003cli\u003eTypical install time: 30–90 minutes depending on access and tools.\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs and anti-seize guidance to avoid damage during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and customer support come with this kit?\u003c\/h3\u003e\n\u003cp\u003eSDYYDS backs the kit with a one-year warranty and responsive customer service to resolve fitment or functionality questions. Support is available if you encounter issues during installation or the initial operation period.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1-year limited warranty covering manufacturing defects.\u003c\/li\u003e\n  \u003cli\u003eCustomer service response within 24 hours for troubleshooting and guidance.\u003c\/li\u003e\n  \u003cli\u003eIf a part is defective, SDYYDS provides replacement steps per warranty terms.\u003c\/li\u003e\n  \u003cli\u003eDocumentation and part numbers included for easy reference: 234-9124 (upstream), 234-4350 (downstream).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis pair is made specifically for Honda Civic 1.8L L4 engines built between 2006 and 2015. Confirm fitment by matching your vehicle’s engine code and existing O2 sensor part numbers before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: Honda Civic 2006–2015, 1.8L L4 engine models.\u003c\/li\u003e\n  \u003cli\u003eInterchange numbers: 234-9124 (upstream) and 234-4350 (downstream).\u003c\/li\u003e\n  \u003cli\u003eIntended as direct replacements for the factory sensors—no modifications expected.\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle’s VIN or service manual to verify compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This SDYYDS dual oxygen sensor kit is suited for Honda Civic owners and DIY mechanics who need a reliable, cost-effective replacement for aging O2 sensors on 2006–2015 1.8L L4 Civics. It’s also appropriate for service shops replacing both upstream and downstream sensors to restore accurate emissions readings and fuel control without wiring changes. If you want a plug-and-play solution with factory-style fit and one-year backing, this pair provides a practical option.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors fit my 2012 Honda Civic 1.8L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This SDYYDS kit covers 2006–2015 Honda Civic models with the 1.8L L4 engine, including 2012. Confirm by matching part numbers or VIN if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to program the ECU after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is typically required; the ECU relearns from the new sensors during normal driving cycles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SDYYDS","offers":[{"title":"Default Title","offer_id":67586634449081,"sku":"B0D8VN5V71","price":121.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/sdyyds-upstream-downstream-kit-front-packaging.jpg?v=1790488772"},{"product_id":"gdukop-oxygen-sensor-kit-upstream-downstream-for-honda-2-4l-cr-v-2012-2019-accord-2013-2017-oe-fit-durable","title":"GDUKOP Oxygen Sensor Kit Upstream \u0026 Downstream for Honda 2.4L (CR-V 2012–2019, Accord 2013–2017) — OE Fit, Durable","description":"\u003cp\u003e\u003cstrong\u003eGDUKOP’s 234-9131 two-piece oxygen sensor kit replaces both upstream and downstream O2 sensors to restore proper air–fuel monitoring and engine responsiveness in compatible Honda models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your 2012–2019 Honda CR-V or 2013–2017 Honda Accord 2.4L shows rough idle, hesitation, or a persistent check engine light related to oxygen sensor faults, this matched upstream and downstream sensor set offers a direct-fit repair option. Each sensor is built to OE specifications and uses durable materials that withstand heat and pressure, helping the engine control module get accurate readings for fuel trimming and emissions control.\u003c\/p\u003e\n\n\u003ch3\u003eHow does replacing both upstream and downstream sensors improve performance?\u003c\/h3\u003e\n\u003cp\u003eWorn or failing oxygen sensors can give the ECU misleading oxygen-level data, which leads to poor fuel metering and drivability issues. Installing a matched upstream (234-9131) and downstream (234-4980) pair helps the system recalibrate and maintain correct air–fuel ratios.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream part numbers: 234-9131, 36531-5A2-A01 — monitors pre-catalyst combustion.\u003c\/li\u003e\n  \u003cli\u003eDownstream part numbers: 234-4980, 36532-5LA-A01 — verifies catalytic converter efficiency.\u003c\/li\u003e\n  \u003cli\u003eRestores smoother idle and reduces hesitation under load.\u003c\/li\u003e\n  \u003cli\u003eHelps clear OBD-II codes when sensors are the root cause.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and engines do these sensors fit?\u003c\/h3\u003e\n\u003cp\u003eThis GDUKOP oxygen sensor kit is designed as a direct replacement for specific Honda applications that use the 2.4L engine. Confirm compatibility by cross-referencing the OE numbers before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Honda CR-V model years 2012–2019.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Honda Accord 2.4L model years 2013–2017.\u003c\/li\u003e\n  \u003cli\u003eMatches listed OE numbers for straightforward fitment.\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle VIN and part numbers to ensure a perfect match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eGDUKOP sensors are engineered for plug-and-play replacement with correct wiring and a weather-resistant seal to simplify installation. A basic set of hand tools is usually enough, though rusted exhaust hardware may require penetrating oil and longer-handled tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for straightforward installation with basic hand tools.\u003c\/li\u003e\n  \u003cli\u003eWeather-tight connectors reduce corrosion risk at the plug.\u003c\/li\u003e\n  \u003cli\u003eNo ECU reprogramming typically required after sensor replacement.\u003c\/li\u003e\n  \u003cli\u003eInspect harness and threads for damage before final assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and quality features do these sensors include?\u003c\/h3\u003e\n\u003cp\u003eThese oxygen sensors are manufactured using high-quality materials to resist extreme under-hood temperatures and pressure cycles. That construction supports long service life and reliable readings under typical driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt to tolerate high exhaust temperatures and vibration.\u003c\/li\u003e\n  \u003cli\u003eConstructed for consistent electrical performance and response time.\u003c\/li\u003e\n  \u003cli\u003eSealed connectors and robust housings improve weather resistance.\u003c\/li\u003e\n  \u003cli\u003eOE-equivalent design for fit and function without modifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This GDUKOP 2-piece O2 sensor kit is aimed at DIY mechanics and professional technicians maintaining 2012–2019 Honda CR-Vs or 2013–2017 Accord 2.4L models who need a reliable, OE-referenced replacement. It’s well suited for anyone troubleshooting fuel-trim errors, recurring OBD-II oxygen sensor codes, or diminished throttle response due to aging sensors. Verify vehicle fitment against the listed OE part numbers (234-9131\/234-4980 and 36531-5A2-A01\/36532-5LA-A01) before ordering to ensure compatibility and a trouble-free installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit clear my check engine light?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If the light is triggered by faulty O2 sensors, replacing both upstream and downstream sensors can resolve the code; diagnostics recommended first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors require ECU reprogramming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No reprogramming is normally needed; they are direct-fit OE replacements compatible with the factory ECU.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GDUKOP","offers":[{"title":"Default Title","offer_id":67586634842297,"sku":"B0FW4VFXC5","price":121.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gdukop-front-packaging-assembly.jpg?v=1790488796"},{"product_id":"bosch-oxygen-sensor-13477-direct-fit-oe-replacement-for-bmw-land-rover-heated-stainless-steel","title":"Bosch Oxygen Sensor 13477 — Direct-Fit OE Replacement for BMW \u0026 Land Rover, Heated Stainless Steel","description":"\u003cp\u003e\u003cstrong\u003eBOSCH 13477 is a premium direct-fit oxygen sensor engineered to restore accurate air-fuel readings and improve exhaust system performance for compatible BMW and Land Rover models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Bosch Original Equipment (OE) oxygen sensor is built on decades of sensor manufacturing experience, beginning with Bosch's 1960s innovations in oxygen sensing. Each unit undergoes full functional testing and is assembled with a double laser-welded stainless steel body, a fast-acting heater, and OE-style connectors so you get a durable part that installs easily and performs reliably under typical driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this oxygen sensor improve engine performance?\u003c\/h3\u003e\n\u003cp\u003eThe sensor provides precise feedback on exhaust oxygen levels so the engine control unit (ECU) can adjust fuel delivery for efficient combustion. Restoring accurate sensor input helps maintain drivability and engine responsiveness without guessing at fuel trims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast-acting heater reaches operating temperature within seconds for quicker closed-loop operation.\u003c\/li\u003e\n  \u003cli\u003eFactory-tested units deliver consistent electrical output across operating ranges.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit connectors ensure correct signal transmission to the vehicle ECU.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability features protect the sensor from exhaust conditions?\u003c\/h3\u003e\n\u003cp\u003eBosch builds this sensor with a double laser-welded stainless steel housing and a sealed protection tube to resist corrosion and contamination from exhaust gases. The robust construction extends service life compared with cheaper, unsealed alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel body is fully submersible and tightly sealed against exhaust moisture and soot.\u003c\/li\u003e\n  \u003cli\u003eSeared protection tube appearance indicates each unit passed full functionality testing.\u003c\/li\u003e\n  \u003cli\u003eAnti-seize coated threads reduce galling risk and simplify future removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward and vehicle-specific?\u003c\/h3\u003e\n\u003cp\u003eThis Bosch sensor is designed as a true direct-fit replacement with OE-style wiring harnesses and connectors, cut to match original equipment for the listed vehicles. Pre-applied anti-seize on the threads and correct connector pinouts minimize installation time and reduce potential wiring errors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit OE connectors match factory harnesses for plug-and-play installation.\u003c\/li\u003e\n  \u003cli\u003eThread anti-seize provided out of the box prevents thread damage during torqueing.\u003c\/li\u003e\n  \u003cli\u003eVerify part compatibility with your vehicle year, engine, and sensor position before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles are compatible with BOSCH 13477?\u003c\/h3\u003e\n\u003cp\u003eThis sensor fits a range of BMW models from the mid-1990s through the mid-2000s and select Land Rover\/Range Rover vehicles. Compatibility depends on engine type and the sensor’s position; consult the fitment checker or vehicle repair manual to confirm the right location before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon BMW fitments include various 3-Series, 5-Series, 7-Series, Z3\/Z4, X3\/X5 models and select M and Z8 variants.\u003c\/li\u003e\n  \u003cli\u003eAlso used on some Land Rover \/ Range Rover applications from model years listed by Bosch.\u003c\/li\u003e\n  \u003cli\u003eFitment may vary by engine and sensor bank—double-check fitment references.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Mechanics, DIY enthusiasts, and fleet managers seeking a reliable OE-quality oxygen sensor that mirrors factory specifications. If you need a long-lasting replacement that simplifies installation, reduces guesswork at diagnosis, and supports accurate air-fuel control for compatible BMW and Range Rover engines, the BOSCH 13477 is designed to meet those needs without aftermarket compromise.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know this sensor fits my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check Bosch fitment lists and verify engine, year, and sensor position with the vehicle's fit checker or service manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic tools and an oxygen sensor socket are usually sufficient; no wiring modifications are required for direct-fit models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":67586642378937,"sku":"B000GZEK00","price":148.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bosch-13477-front-packaging.jpg?v=1790489066"},{"product_id":"qiybone-oxygen-o2-sensor-4-piece-kit-234-4815-for-gm-3-0l-3-6l-v6-upstream-downstream-oem-style-connectors","title":"QIYBONE Oxygen O2 Sensor 4‑Piece Kit 234-4815 for GM 3.0L\/3.6L V6 — Upstream \u0026 Downstream, OEM-Style Connectors","description":"\u003cp\u003e\u003cstrong\u003eQIYBONE 4PCS Oxygen O2 Sensor kit (234-4815) replacement set for upstream and downstream positions designed to restore accurate air-fuel monitoring on compatible GM V6 3.0L and 3.6L vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle is showing reduced fuel economy, rough idle, or a check engine light pointing to an O2 sensor, this four-piece replacement set gives you both upstream and downstream coverage for many GM models. These sensors are built from stainless steel and high-temperature materials, with OE-style connectors for a straightforward swap. The kit matches multiple OEM reference numbers and fits specific Chevrolet, GMC, Buick, Cadillac and Saturn V6 applications from 2009 through 2017.\u003c\/p\u003e\n\n\u003ch3\u003eWhich cars and engines do these sensors fit?\u003c\/h3\u003e\n\u003cp\u003eThese oxygen sensors are targeted at GM V6 engines in common mid-size and crossover vehicles. Confirm your vehicle year, engine size (3.0L or 3.6L V6) and connector shape against the original sensor before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGMC: Acadia (2009–2011 3.6L), Terrain (2010–2017 varying 3.0L\/3.6L)\u003c\/li\u003e\n  \u003cli\u003eChevrolet: Equinox (2010–2017), Impala (2012–2016), Traverse (2009–2011), Captiva Sport (2011–2015)\u003c\/li\u003e\n  \u003cli\u003eBuick\/Cadillac\/Saturn: Enclave, LaCrosse, Allure, SRX, Outlook compatible across listed years\u003c\/li\u003e\n  \u003cli\u003eMatches OE\/reference numbers like 234-4815, 250-24649, 12607333 and others for cross-reference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these sensors affect drivability and fuel economy?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors monitor exhaust oxygen to help the engine control unit balance air and fuel. Fresh, responsive sensors help the ECU tune fuel delivery more accurately, which can reduce wasted fuel and smooth engine operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved air-fuel readings lead to more consistent idle and throttle response\u003c\/li\u003e\n  \u003cli\u003eFaster sensor response helps prevent rich or lean running conditions\u003c\/li\u003e\n  \u003cli\u003eCan contribute to better miles per gallon when compared to worn sensors\u003c\/li\u003e\n  \u003cli\u003eMay reduce emissions-related faults and help clear some check-engine codes when faults were sensor-related\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these sensors easy to install and what should I check first?\u003c\/h3\u003e\n\u003cp\u003eQIYBONE sensors use an OEM-style plug-and-play design so most installations are simple for anyone comfortable under the hood. Basic hand tools and anti-seize on threads are typical installation steps; always compare the connector and thread pitch to your existing sensor before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect the original sensor plug shape and wire length to ensure compatibility\u003c\/li\u003e\n  \u003cli\u003eAllow the exhaust to cool and disconnect the battery before starting\u003c\/li\u003e\n  \u003cli\u003eUse penetrating oil on seized sensors and a proper oxygen sensor socket for removal\u003c\/li\u003e\n  \u003cli\u003eTighten to manufacturer torque spec and avoid over-torquing the sensor threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features are included?\u003c\/h3\u003e\n\u003cp\u003eThese oxygen sensors are constructed with stainless steel housings and high temperature resistant internal components to withstand exhaust conditions. They are manufactured to provide long service life and reliable sealing against exhaust leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel body resists corrosion from heat and road contaminants\u003c\/li\u003e\n  \u003cli\u003eHigh-temp internal materials maintain response and longevity\u003c\/li\u003e\n  \u003cli\u003eSealed design minimizes exhaust leakage around the sensor fitting\u003c\/li\u003e\n  \u003cli\u003eSupplied in a four-piece set to replace upstream and downstream positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This QIYBONE 4PCS O2 sensor kit is intended for drivers and mechanics who own compatible GM V6 vehicles from 2009–2017 and need a cost-effective replacement for failing upstream and downstream oxygen sensors. It's a practical choice for DIY installers, independent shops, or fleet maintenance teams seeking OE-style connectors, broad fitment coverage, and durable construction without buying individual sensors separately.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2014 Chevy Equinox 3.6L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit lists compatibility with Equinox 2013–2017 V6 3.6L, but confirm connector match with your original sensor.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors come pre-coated with anti-seize?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They typically arrive without anti-seize; apply a small amount on threads during installation if needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QIYBONE","offers":[{"title":"Default Title","offer_id":67586649653433,"sku":"B0GGJ2ZSYK","price":152.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/qiybone-front-packaging-oxygen-sensors.jpg?v=1790489231"},{"product_id":"sangyue-oxygen-sensor-4-pack-for-ford-f-150-lincoln-mark-lt-2004-2008-upstream-downstream-direct-fit","title":"Sangyue Oxygen Sensor 4-Pack for Ford F-150 \u0026 Lincoln Mark LT 2004-2008 – Upstream + Downstream Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eSangyue 4-pack oxygen sensors replace both upstream and downstream sensors for Ford F-150 (2004–2008) and Lincoln Mark LT (2006–2008), restoring accurate air-fuel monitoring for compatible 4.2L, 4.6L and 5.4L engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese four sensors—two upstream (pre-catalytic converter) and two downstream (post-catalytic converter)—are designed as a direct-fit aftermarket replacement for the listed Ford and Lincoln models. Engineered to match factory connectors and mounting dimensions, the set helps clear fault codes related to O2 sensors, supports smoother idle and throttle response, and can help your vehicle run closer to intended emissions parameters when installed correctly. The package includes a one-year unlimited-mileage quality guarantee and fits the specified engine options; always confirm vehicle details using the seller's vehicle selector before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines are compatible with this Sangyue 4-piece oxygen sensor set?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit fits Ford F-150 model years 2004–2008 with 4.2L, 4.6L, or 5.4L engines, and Lincoln Mark LT trucks with the 5.4L engine from 2006–2008. Compatibility depends on engine type and production year—verify using the vehicle selector on the product page to ensure correct fitment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFord F-150: 2004, 2005, 2006, 2007, 2008 with 4.2L, 4.6L, 5.4L engines\u003c\/li\u003e\n  \u003cli\u003eLincoln Mark LT: 2006, 2007, 2008 with 5.4L engine\u003c\/li\u003e\n  \u003cli\u003eIncludes two upstream (bank 1 and bank 2) and two downstream sensors\u003c\/li\u003e\n  \u003cli\u003eConfirm engine and year in the vehicle selector before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are upstream and downstream oxygen sensors different, and why replace both?\u003c\/h3\u003e\n\n\u003cp\u003eUpstream sensors measure exhaust oxygen before the catalytic converter to help the engine control module adjust fuel delivery; downstream sensors monitor converter performance after the catalyst. Replacing both ensures balanced readings and prevents mismatched sensor data that can trigger error codes or ineffective emissions diagnostics.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUpstream (pre-cat) sensors: control air-fuel trim\u003c\/li\u003e\n  \u003cli\u003eDownstream (post-cat) sensors: verify catalytic converter efficiency\u003c\/li\u003e\n  \u003cli\u003eReplacing all four reduces the chance of lingering check-engine lights\u003c\/li\u003e\n  \u003cli\u003eMatched set helps maintain consistent signal timing and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and what tools are needed?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for experienced DIYers or professional mechanics: lift the vehicle for access, unplug the sensor harness, unthread the old sensors, install the new sensors with proper torque, and reconnect the wiring. An O2 sensor socket and basic hand tools are typically required; always follow safety precautions and torque specifications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTools: O2 sensor socket, ratchet, penetrating fluid, torque wrench\u003c\/li\u003e\n  \u003cli\u003eTime: about 0.5–1.5 hours per sensor depending on rust and access\u003c\/li\u003e\n  \u003cli\u003eTip: apply anti-seize where appropriate and clear codes after replacement\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if you lack experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does Sangyue’s warranty cover and how to confirm fitment before buying?\u003c\/h3\u003e\n\n\u003cp\u003eThe product includes a one-year unlimited-mileage quality guarantee that covers defects in materials and workmanship under normal use. Before purchasing, use the 'Select Your Vehicle' tool on the product page to match brand, model, year and engine notes; this reduces the chance of ordering incompatible parts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWarranty: one year, unlimited mileage for quality defects\u003c\/li\u003e\n  \u003cli\u003eFitment check: use vehicle selector for vehicle-specific confirmation\u003c\/li\u003e\n  \u003cli\u003eReturns: follow seller policy if sensors are incompatible or defective\u003c\/li\u003e\n  \u003cli\u003eDocumentation: keep order and vehicle information for warranty claims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: this Sangyue 4-piece oxygen sensor kit is aimed at owners and technicians servicing Ford F-150 trucks (2004–2008) and Lincoln Mark LT trucks (2006–2008) with the specified engines who want a complete upstream and downstream replacement. It’s suitable for drivers addressing persistent O2-related fault codes, preparing a vehicle for emissions testing, or restoring responsive fuel management. If you’re unsure about fitment or installation, consult a qualified mechanic and verify your vehicle details with the provided selector before ordering.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this 4-pack fit my 2005 Ford F-150 5.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit fits 2004–2008 Ford F-150 5.4L engines; confirm using the product's vehicle selector before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the set include both upstream and downstream sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the package contains two upstream sensors and two downstream sensors for complete replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sangyue","offers":[{"title":"Default Title","offer_id":67586653487289,"sku":"B07D75SP1J","price":119.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/sangyue-front-packaging-oxygen-sensors.jpg?v=1790489417"},{"product_id":"a-premium-4-pack-o2-oxygen-sensor-kit-for-gm-trucks-suvs-2008-2014-upstream-downstream-oe-style-fit","title":"A-Premium 4-Pack O2 Oxygen Sensor Kit for GM Trucks \u0026 SUVs (2008–2014) — Upstream \u0026 Downstream, OE-Style Fit","description":"\u003cp\u003e\u003cstrong\u003eA-Premium’s 4-pack oxygen sensor set replaces both upstream and downstream O2 sensors to restore accurate air-fuel readings for compatible GM trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis complete sensor kit is engineered for late‑2000s to early‑2010s GM V8 and select V6 models, offering direct-fit compatibility for many Sierra, Silverado, Yukon, Tahoe, Escalade, Suburban, Avalanche and more. The four-sensor bundle includes both pre-catalyst (upstream) and post-catalyst (downstream) sensors so you can service an entire bank at once and reduce diagnostic time. Each sensor is manufactured and tested to meet OE-style specifications and ships with a one-year unlimited-mileage quality guarantee for added peace of mind.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these A-Premium O2 sensors fit?\u003c\/h3\u003e\n\u003cp\u003eThese sensors cover a broad range of GM vehicles from approximately 2008–2014, including full-size trucks, SUVs and a handful of sedans. Fitment varies by engine displacement and model year—always cross-check part references or your VIN before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGMC Sierra 1500 (2008–2013) and HD models (2008–2010) with V8 engines\u003c\/li\u003e\n  \u003cli\u003eChevrolet Silverado, Tahoe, Suburban, Avalanche and select Malibu models (2008–2014)\u003c\/li\u003e\n  \u003cli\u003eCadillac Escalade and Escalade ESV\/EXT (2008–2014) for 6.0L and 6.2L V8s\u003c\/li\u003e\n  \u003cli\u003eAdditional fitments: Pontiac G6, Saturn Aura\/Vue for select 3.5L–3.9L V6s\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know which sensor goes where and what the kit includes?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies both upstream (pre-catalyst) and downstream (post-catalyst) oxygen sensors for an entire vehicle bank, eliminating the need to buy sensors individually. Upstream sensors are located before the catalytic converter to monitor combustion, while downstream sensors sit after the converter to check its efficiency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour sensors total — covers both banks (upstream and downstream)\u003c\/li\u003e\n  \u003cli\u003eOE-style connectors and wiring lengths designed for direct installation\u003c\/li\u003e\n  \u003cli\u003eReference numbers included to verify exact replacement part crossovers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the benefits of replacing all four O2 sensors at once?\u003c\/h3\u003e\n\u003cp\u003eReplacing the full set ensures consistent sensor response across both banks and prevents diagnostic confusion caused by mixing old and new parts. Swapping all sensors at once can stabilize emissions readings and provide a reliable baseline for engine tuning or further diagnostics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniform sensor performance and quicker fault isolation\u003c\/li\u003e\n  \u003cli\u003eReduced trips to the parts store and lower per-sensor cost\u003c\/li\u003e\n  \u003cli\u003eHelps ensure accurate long-term exhaust monitoring and emissions checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these A-Premium sensors easy to install and what warranty is included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with basic automotive repair: unclip the harness, unbolt the old sensor, remove it with an oxygen sensor socket and fit the new one. A-Premium backs this 4-pack with a one-year unlimited-mileage quality guarantee—contact their support if you encounter fitment or performance issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design reduces the need for splicing or modification\u003c\/li\u003e\n  \u003cli\u003eStandard installation steps—no special calibration required in most cases\u003c\/li\u003e\n  \u003cli\u003e1-year unlimited-mileage guarantee for added buyer protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This A-Premium 4-pack is designed for DIY mechanics, independent garages and fleet owners who service mid‑2000s to early‑2010s GM trucks and SUVs. If you need to replace both upstream and downstream oxygen sensors to resolve diagnostic trouble codes, restore more consistent sensor readings, or prepare a vehicle for emissions testing, this complete kit provides a cost-effective and convenient option with broad model coverage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this 4-pack fit my 2010 Chevy Silverado 5.3L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this kit lists compatibility with Silverado 1500 2008–2013 5.3L V8, but verify your VIN or OE reference numbers before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors require programming after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is typically needed; they are direct-fit OE-style sensors that work with the existing vehicle systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67586691727545,"sku":"B0C1B7XVLF","price":142.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-front-packaging-4-pack-oxygen-sensors.jpg?v=1790490185"},{"product_id":"higherbro-oxygen-o2-sensor-kit-4pcs-upstream-downstream-flange-mount-for-ford-1999-2010-stainless-steel-1-year-warranty","title":"higherbro Oxygen O2 Sensor Kit 4PCS — Upstream \u0026 Downstream Flange-Mount for Ford 1999–2010, Stainless Steel, 1-Year Warranty","description":"\u003cp\u003e\u003cstrong\u003eThe higherbro 4PCS Oxygen O2 Sensor set replaces both upstream and downstream sensors for compatible Ford engines, restoring accurate oxygen readings and exhaust monitoring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis four-piece oxygen sensor kit is built for a range of Ford (and select Jaguar) applications from 1999 through 2010. Each sensor is flange-mounted and constructed from durable materials such as stainless steel, copper, and aluminum, designed to meet the environmental and temperature stresses typical in exhaust systems. The set includes both upstream (pre-catalyst) and downstream (post-catalyst) sensors so you can address multiple worn sensors at once, and it’s backed by a one-year quality guarantee for added confidence.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines does this sensor kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit covers many Ford nameplates and some Jaguar S-Type years. Compatibility spans multiple engine displacements; always confirm with the vehicle selector before purchase to ensure exact fitment for year, engine, and model notes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord Mustang (1999–2010): 3.8L, 3.9L, 4.0L, 4.6L, 5.4L\u003c\/li\u003e\n  \u003cli\u003eFord Expedition (1999–2004), Explorer (2002–2003), F-150 (2001–2003) and E-150\/Econoline variants\u003c\/li\u003e\n  \u003cli\u003eFord Taurus (2001–2007) and Thunderbird (2002–2005) with listed engine sizes\u003c\/li\u003e\n  \u003cli\u003eJaguar S-Type (2000–2002): select 3.0L and 4.0L applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these sensors constructed and why does that matter?\u003c\/h3\u003e\n\u003cp\u003ehigherbro sensors use metals chosen for corrosion resistance and thermal endurance to withstand exhaust heat and harsh under-hood conditions. Solid materials and flange mounting improve sealing and installation stability compared with some cheaper screw-in designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel housing resists rust and exhaust corrosion.\u003c\/li\u003e\n  \u003cli\u003eCopper and aluminum components support reliable electrical and thermal performance.\u003c\/li\u003e\n  \u003cli\u003eFlange mount offers a secure, leak-resistant fit in compatible exhaust ports.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat problems will replacing both upstream and downstream sensors solve?\u003c\/h3\u003e\n\u003cp\u003eSwapping a full set addresses inconsistent oxygen readings, rough idle, decreased fuel economy, and exhaust-related diagnostic trouble codes (DTCs) tied to sensor faults. Changing both sensor positions at once reduces the chance one new sensor will be mismatched to an older partner, simplifying troubleshooting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResolves O2 sensor fault codes and related check engine lights on compatible vehicles.\u003c\/li\u003e\n  \u003cli\u003eHelps restore fuel trim stability and smoother idle behavior.\u003c\/li\u003e\n  \u003cli\u003eEnsures consistent pre- and post-catalyst monitoring after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering and installing this set?\u003c\/h3\u003e\n\u003cp\u003eConfirm exact model-year and engine size using the site’s \"Select Your Vehicle\" tool to ensure the flange mount and wiring match your exhaust plumbing and connector types. If in doubt, compare old sensor part positions and physical mounting to the listing photos or consult a professional installer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the vehicle selector (make, model, year, engine, note) for compatibility verification.\u003c\/li\u003e\n  \u003cli\u003eCompare sensor flange style and connector to the original equipment sensors.\u003c\/li\u003e\n  \u003cli\u003ePlan basic tools and anti-seize for threads if replacing sensors yourself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers and mechanics who own compatible Ford or specified Jaguar models and want a cost-effective, complete upstream-plus-downstream sensor replacement. It’s suited for owners addressing oxygen-sensor codes, restoring fuel control after long-term wear, or performing preventive maintenance. If you need one-year coverage and sensors built from corrosion-resistant metals with flange mounts, this kit offers a convenient, vehicle-specific replacement—just verify fitment with the selector before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this 4-piece kit include both upstream and downstream sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the set contains four sensors covering upstream (pre-catalyst) and downstream (post-catalyst) positions for compatible vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What if the sensors don't fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check the \"Select Your Vehicle\" tool before buying. If incompatible, contact support within the one-year guarantee period for options.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"higherbro","offers":[{"title":"Default Title","offer_id":67586700050617,"sku":"B07ZCMK5KD","price":146.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/higherbro-front-packaging-4pcs-o2-sensors.jpg?v=1790490422"},{"product_id":"drivefix-oxygen-sensor-set-for-lexus-toyota-v6-v8-upstream-downstream-4-piece-oe-fit","title":"DriveFix Oxygen Sensor Set for Lexus \u0026 Toyota V6\/V8 — Upstream \u0026 Downstream 4‑Piece OE Fit","description":"\u003cp\u003e\u003cstrong\u003eDriveFix upstream and downstream oxygen sensor set replaces faulty O2 sensors on compatible Lexus and Toyota V6\/V8 models to restore accurate air-fuel monitoring and emissions signaling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen an oxygen sensor fails, engines can run rich or lean, triggering check-engine lights and reducing performance. This DriveFix set includes both upstream (pre-catalytic converter) and downstream (post-catalytic converter) sensors designed to fit a wide range of Lexus and Toyota vehicles — from ES and GX to 4Runner, Camry, Tacoma, Tundra and more. Each sensor is built to match OE fitment and wiring so installation is straightforward for DIY mechanics or professional technicians.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Lexus and Toyota models does this sensor kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis set covers many common Lexus and Toyota platforms across multiple years and engine sizes. Compatibility lists include specific model years and positions (upstream or downstream) so you can confirm fit before purchase. It replaces a long list of OEM part numbers for broad interchangeability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLexus: ES350 (2007–2014), GX460\/470 (2003–2013), LX470\/LX570 (2005–2013)\u003c\/li\u003e\n  \u003cli\u003eToyota: 4Runner (2001–2012), Camry (2002–2014), Tacoma\/Tundra (2005–2015), Avalon, Sequoia, Land Cruiser, FJ Cruiser, Solara, Venza\u003c\/li\u003e\n  \u003cli\u003eReplaces part numbers like 234-4138, 234-4260, 89465-04270 and many OEM equivalents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these upstream and downstream sensors differ and why both matter?\u003c\/h3\u003e\n\u003cp\u003eUpstream sensors sit before the catalytic converter and report combustion mixture to the engine control unit for fuel trim adjustments. Downstream sensors are mounted after the converter and monitor catalyst efficiency. Replacing both when one fails or when mileage is high ensures consistent readings and avoids mismatched sensor performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream sensors: monitor oxygen for air-fuel ratio control\u003c\/li\u003e\n  \u003cli\u003eDownstream sensors: verify catalytic converter performance\u003c\/li\u003e\n  \u003cli\u003eInstalling matched sensors reduces false diagnostics and stabilizes engine management\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the DriveFix package and what should I check before installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with two upstream and two downstream sensors to cover both banks and positions for dual-sensor engines. Before installing, compare connectors, thread sizes and wire lengths to your vehicle’s sensors and confirm the repair code\/powertrain diagnostics reference the oxygen sensors. Use anti-seize on threads if recommended and follow torque specs to avoid damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes: 2x upstream O2 sensors and 2x downstream O2 sensors\u003c\/li\u003e\n  \u003cli\u003eVerify connector type and wire length against your vehicle before installation\u003c\/li\u003e\n  \u003cli\u003eInspect harness and mounting location for heat shields, rust or contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these DriveFix sensors clear my check-engine light and improve performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing faulty oxygen sensors often clears O2-related trouble codes and can help restore correct fuel trims, which may improve idle quality and fuel economy. However, if the catalytic converter or other engine systems are damaged, additional repairs may be required. Always scan codes after replacement to confirm the issue and readiness monitors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOften resolves O2 sensor-specific diagnostic trouble codes (DTCs)\u003c\/li\u003e\n  \u003cli\u003eCan help return fuel trims to expected ranges and stabilize idle\u003c\/li\u003e\n  \u003cli\u003eFurther diagnosis may be needed if codes persist after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DriveFix oxygen sensor set is aimed at owners and mechanics of mid-2000s to mid-2010s Lexus and Toyota vehicles who need an OE-fit replacement for failing O2 sensors. It suits DIY enthusiasts comfortable with basic engine work and professionals who want a complete upstream\/downstream sensor solution that matches OEM part numbers across multiple models.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors fit my Lexus ES350 2010?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The DriveFix set lists fitment for Lexus ES350 2007–2014, covering 2010 models for the downstream position.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many sensors are included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes four sensors total: two upstream O2 sensors and two downstream O2 sensors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DriveFix","offers":[{"title":"Default Title","offer_id":67586701164729,"sku":"B0F5B8PSQZ","price":115.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/drivefix-front-packaging-oxygen-sensor-set.jpg?v=1790490489"},{"product_id":"a-premium-oxygen-sensor-kit-for-subaru-h4-upstream-downstream-heated-4-wire-pair-direct-fit","title":"A-Premium Oxygen Sensor Kit for Subaru H4 — Upstream \u0026 Downstream Heated 4-Wire Pair, Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eThis A-Premium upstream and downstream O2 oxygen sensor kit is a direct-fit, heated replacement designed to restore accurate air-fuel feedback on compatible Subaru H4 engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Subaru is showing a check engine light, reduced fuel efficiency, or uneven idle, the oxygen sensors can be the cause. A-Premium supplies a boxed pair (upstream and downstream) built to match factory fitment for a range of Subaru Crosstrek, Forester, Impreza, Legacy and Outback models. These sensors include a heated element and four-wire connector for reliable signal conditioning and faster warm-up, engineered to simplify swap-in installation without specialized tools.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Subaru models and engine years will these sensors fit?\u003c\/h3\u003e\n\u003cp\u003eThese oxygen sensors are specified for multiple naturally aspirated H4 Subaru engines across several model families. They cover upstream and downstream positions and align with common OEM reference numbers to make compatibility checks straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible vehicles: Crosstrek (2016–2020, H4 2.0L), Forester (2013–2020, H4 2.5L NA), Impreza (2012–2020, H4 2.0L), Legacy\/Outback (2013–2019, H4 2.5L DOHC), XV Crosstrek variants (2013, 2014, 2015).\u003c\/li\u003e\n  \u003cli\u003eReference numbers: 350-34052, 250-24487, 250-54084, 350-64031, OS5579 for cross-checking with service parts lists.\u003c\/li\u003e\n  \u003cli\u003eSold as a pair: two sensors included to replace both upstream and downstream units when needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these sensors constructed and what are their key specifications?\u003c\/h3\u003e\n\u003cp\u003eA-Premium builds these sensors with attention to durability and electrical compatibility for modern engine management systems. The design follows common OEM standards to help deliver consistent readings and long service life under typical driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWire configuration: 4-wire harness with male connector for heated sensor operation and robust grounding.\u003c\/li\u003e\n  \u003cli\u003eLength and mounting: overall lead lengths 425 mm and 400 mm, threaded mounting for direct replacement into the factory bung.\u003c\/li\u003e\n  \u003cli\u003eSensor type: heated oxygen sensor improves warm-up time and emission monitoring accuracy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward for experienced DIYers or technicians; sensors arrive boxed and ready to swap into the factory locations. No special tools are required beyond standard automotive sockets and anti-seize precautions if you plan to reuse mounting threads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstallation notes: disconnect battery, remove old sensor plug, unthread sensor from exhaust bung, fit new sensor, reconnect harness.\u003c\/li\u003e\n  \u003cli\u003eMaintenance tips: avoid cross-threading, verify connector seating, and clear related diagnostic codes after installation.\u003c\/li\u003e\n  \u003cli\u003ePackaging: shipped as a boxed set of two oxygen sensors for convenience and parts parity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This A-Premium oxygen sensor pair suits Subaru owners and independent shops needing a cost-effective, direct-fit replacement for worn or failing upstream and downstream O2 sensors on specified H4 engines. It’s designed for drivers who want OEM-style fitment, quick warm-up performance from heated sensors, and a packaged pair so both monitoring points can be refreshed at once. If you service late-model Crosstreks, Foresters, Imprezas, Legacys or Outbacks with the listed engines and reference numbers, this kit offers a practical replacement backed by A-Premium’s one-year unlimited-mileage guarantee.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors fit a 2018 Subaru Forester 2.5L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This kit covers 2013–2020 Forester H4 2.5L naturally aspirated models, including 2018.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are both upstream and downstream sensors included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The boxed kit contains two heated oxygen sensors—one upstream and one downstream.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67586713026745,"sku":"B0C1B8MJWM","price":142.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-front-packaging_2f9b48b7-9510-4a37-9855-f12ade8fc63b.jpg?v=1790491095"},{"product_id":"belkebir-oxygen-sensor-4-pack-for-chrysler-jeep-dodge-ram-upstream-downstream-o2-sensors-fits-oe-234-4587","title":"BELKEBIR Oxygen Sensor 4-Pack for Chrysler Jeep Dodge Ram — Upstream \u0026 Downstream O2 Sensors (Fits OE 234-4587)","description":"\u003cp\u003e\u003cstrong\u003eBELKEBIR 4-pack oxygen sensors (front and rear) are direct-fit replacements engineered to restore accurate air-fuel monitoring for compatible Chrysler, Jeep, Dodge and Ram vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle is showing check engine codes related to O2 sensors or you're replacing worn sensors as preventive maintenance, this BELKEBIR kit supplies four upstream and downstream sensors built to match OEM fitment and electrical connectors. Each sensor in this set is designed to replace part numbers such as 234-4587, 05149171AA, 68144248AA and WALKER 250-24253, and is intended for a range of Chrysler 300, Town \u0026amp; Country, Jeep Grand Cherokee, Wrangler, Dodge Charger, Durango, Dakota, Ram 1500\/2500\/3500 and related models. These sensors use platinum\/ceramic elements and robust housings to withstand exhaust temperatures and deliver timely oxygen readings to the vehicle’s engine control unit.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these sensors affect my vehicle’s performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing failing O2 sensors helps the engine control unit get accurate exhaust oxygen readings, which supports proper air-fuel balance and smoother engine response. While not a performance upgrade, fresh sensors can reduce rough idling and improve throttle consistency compared with degraded units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores accurate air-fuel data to the ECU for steadier engine operation.\u003c\/li\u003e\n  \u003cli\u003eHelps reduce erratic idling and hesitation during acceleration.\u003c\/li\u003e\n  \u003cli\u003eImproves catalyst monitoring when both upstream and downstream sensors are functional.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these sensors fit my Chrysler 300, Jeep, Dodge or Ram?\u003c\/h3\u003e\n\u003cp\u003eThese BELKEBIR sensors are manufactured for direct compatibility with specific model years and engine configurations; confirm fitment against the listed replace numbers and your vehicle’s part reference before ordering. The kit maps to common OE numbers, enabling straightforward bolt-in replacement for many applications listed in the product details.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatches OE replace numbers: 234-4587, 05149171AA, 68144248AA and more.\u003c\/li\u003e\n  \u003cli\u003eIntended for models like Chrysler 300, Town \u0026amp; Country, Jeep Grand Cherokee, Wrangler, Dodge Durango\/Charger\/Dakota, Ram 1500\/2500\/3500.\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle year and engine code against the product description prior to purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build features ensure durability?\u003c\/h3\u003e\n\u003cp\u003eEach sensor uses ceramic sensing elements with platinum conductors and a durable stainless housing to resist high exhaust temperatures and contaminants. The wiring and connectors are sealed to limit moisture intrusion and electrical interference, improving longevity under typical driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlatinum-coated sensing element for reliable oxygen detection.\u003c\/li\u003e\n  \u003cli\u003eHigh-temp ceramic core and corrosion-resistant metal housing.\u003c\/li\u003e\n  \u003cli\u003eSealed connector and heat-resistant cable sleeve for long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is similar to most threaded O2 sensor swaps: locate the sensor(s) in the exhaust stream, disconnect the wiring harness, unthread the old unit and fit the replacement. Basic hand tools and an O2 sensor socket usually complete the job; when replacing multiple sensors, work methodically to avoid cross-threading and verify connector seating before road-testing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit connectors designed for factory-style plug-and-play replacement.\u003c\/li\u003e\n  \u003cli\u003eUse an O2 sensor socket and anti-seize on threads if advised by a technician.\u003c\/li\u003e\n  \u003cli\u003eClear diagnostic trouble codes after installation and perform a brief test drive to confirm resolution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BELKEBIR 4-piece oxygen sensor set is suited for professional mechanics, DIY enthusiasts and vehicle owners maintaining Chrysler, Jeep, Dodge or Ram models that require the listed OE replacements. Choose this kit if you need both upstream and downstream sensors for a comprehensive repair or preventative service and if your vehicle’s part numbers match the compatibility list in the product details. Always verify year, engine type and diagnostic codes to ensure correct selection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors replace OEM part 234-4587?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this BELKEBIR kit is compatible with replacements including 234-4587 and several equivalent OE numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these without professional tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools and an O2 sensor socket are usually sufficient; professional help is recommended if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BELKEBIR","offers":[{"title":"Default Title","offer_id":67586713321657,"sku":"B0F6JV6XVS","price":119.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/belkebir-front-packaging-assembly.jpg?v=1790491113"},{"product_id":"qiybone-o2-sensor-kit-4pcs-upstream-downstream-for-2006-2007-gm-trucks-suvs-stainless-steel-direct-fit","title":"QIYBONE O2 Sensor Kit 4PCS Upstream \u0026 Downstream for 2006–2007 GM Trucks SUVs, Stainless Steel Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eQIYBONE 4PCS oxygen sensors (part numbers 234-4337 and 234-4018) are a direct-fit upstream and downstream replacement kit for select 2006–2007 GM V6\/V8 trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese four stainless-steel O2 sensors are built to OEM fitment standards to restore accurate air-fuel readings on affected Chevrolet, GMC and Cadillac models. Designed for engines including 4.3L, 4.8L, 5.3L, 6.0L and 6.2L, the set covers both pre- and post-catalytic converter positions so you can replace worn sensors at once and bring the exhaust monitoring system back to proper function.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines will these QIYBONE sensors fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit lists broad compatibility across 2006–2007 GM full-size trucks and SUVs. Confirm fitment by matching the original connector and OE\/reference numbers before ordering to ensure correct placement and wiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Silverado 1500 (Classic and regular), Avalanche, Suburban, Tahoe (4.3L–6.0L variations).\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra 1500, Sierra 1500 Classic, Yukon and Yukon XL (4.3L–6.2L variations).\u003c\/li\u003e\n  \u003cli\u003eCadillac: Escalade, Escalade ESV, Escalade EXT (6.2L V8 models).\u003c\/li\u003e\n  \u003cli\u003eReference\/OE numbers included for cross-check: 234-4337, 234-4018 and multiple OEM equivalents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these O2 sensors affect engine performance and fuel use?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors measure exhaust oxygen levels so the engine control unit can maintain the correct air-fuel ratio. Replacing degraded sensors improves the ECU’s feedback, helping the engine run closer to designed efficiency and reducing the risk of excessive fuel use due to poor readings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFaster and more accurate oxygen readings for better fuel-trim adjustments.\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize idle and combustion consistency under load.\u003c\/li\u003e\n  \u003cli\u003eSupports catalytic converter monitoring by providing reliable upstream and downstream signals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and materials of the QIYBONE sensors?\u003c\/h3\u003e\n\u003cp\u003eThese sensors use stainless steel housings and high-temperature resistant internal materials to tolerate exhaust conditions. The design includes sealing and protection features intended to extend service life compared with lower-quality aftermarket units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless-steel construction resists corrosion and thermal cycles.\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature-resistant sensing element and insulation.\u003c\/li\u003e\n  \u003cli\u003eSealed connectors and robust wiring for longer-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these sensors easy to install, and what should I check before replacing them?\u003c\/h3\u003e\n\u003cp\u003eQIYBONE sensors are manufactured to match OEM plug-and-play connectors, so installation is typically straightforward with common hand tools. Verify the exact plug style, number of wires and the OE\/reference part numbers against your vehicle’s old sensors before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to OEM dimensions and electrical connectors for direct replacement.\u003c\/li\u003e\n  \u003cli\u003eRecommended: compare connector image and pin count to your existing sensor first.\u003c\/li\u003e\n  \u003cli\u003eInstallation usually requires removal at the exhaust port and torque to OEM specs; anti-seize handling may be noted in instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This four-piece QIYBONE O2 sensor kit is intended for owners, mechanics and fleet operators of 2006–2007 Chevrolet, GMC and Cadillac trucks\/SUVs who need complete upstream and downstream replacement sensors. It’s a practical choice when multiple sensors show age-related wear, when diagnosing oxygen-sensor-related trouble codes, or when restoring proper exhaust-sensing after catalytic work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors come with the correct connectors for my 2007 Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — QIYBONE sensors are made to OEM connector specifications, but always compare your vehicle’s existing plug and wire count before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace just one sensor or should I install all four?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can replace individual failed sensors, but installing the full four-piece kit ensures consistent readings across upstream and downstream positions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"QIYBONE","offers":[{"title":"Default Title","offer_id":67586730557625,"sku":"B0GGHSD673","price":116.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/qiybone-front-packaging-assembly.jpg?v=1790491626"},{"product_id":"higherbro-oxygen-o2-sensor-kit-4pcs-for-dodge-grand-caravan-direct-replace-upstream-downstream","title":"higherbro Oxygen O2 Sensor Kit 4PCS for Dodge Grand Caravan — Direct-Replace Upstream \u0026 Downstream","description":"\u003cp\u003e\u003cstrong\u003ehigherbro 4PCS Oxygen O2 Sensor kit replaces both upstream and downstream sensors (2x upstream, 2x downstream) to restore accurate air-fuel feedback on compatible Dodge, Chrysler, Jeep and RAM engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis four-piece sensor set is engineered as a direct-replacement oxygen sensor kit for a wide range of Chrysler group vehicles, including Dodge Grand Caravan models and many Jeep, Chrysler and RAM applications. Each sensor is built to match OE form, fit and electrical connectors so installation is straightforward for DIY mechanics or professional technicians. The kit comes with a one-year quality guarantee, and we recommend verifying exact vehicle fitment using your vehicle’s make, model, year and engine details before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines will these higherbro oxygen sensors fit?\u003c\/h3\u003e\n\u003cp\u003eThese sensors cover many Chrysler Group applications across multiple years and engines—both V6 and V8 platforms. They are intended for direct replacement where original-style connectors and mounting threads match your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: Dodge Grand Caravan 2008–2011 (3.6L, 4.0L variations noted)\u003c\/li\u003e\n  \u003cli\u003eIncludes many Jeep Grand Cherokee (3.6L, 5.7L, 6.1L, 6.4L) and Wrangler years\u003c\/li\u003e\n  \u003cli\u003eCovers Chrysler 200, 300 and Town \u0026amp; Country variants across listed years\u003c\/li\u003e\n  \u003cli\u003eAlso fits multiple RAM 1500\/2500\/3500 3.7L, 5.7L and other specified years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these sensors help with driving performance and diagnostics?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors monitor exhaust oxygen content to inform the engine control unit how much fuel to add. Replacing failing sensors helps the vehicle maintain balanced air–fuel ratios, reduces rough running caused by bad inputs, and clears or prevents some diagnostic trouble codes tied to O2 performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores accurate oxygen readings to the ECU for correct fueling\u003c\/li\u003e\n  \u003cli\u003eHelps reduce symptoms like rough idle or reduced fuel efficiency tied to bad sensors\u003c\/li\u003e\n  \u003cli\u003eCan resolve OBD-II codes related to sensor circuits or sensor performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the 4PCS kit and what should I check before ordering?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes four oxygen sensors—two upstream (pre-catalytic converter) and two downstream (post-catalytic converter). Before purchase, confirm your vehicle’s engine size, connector type and sensor locations match the product listing to ensure correct compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 4 sensors (2 upstream, 2 downstream) in higherbro packaging\u003c\/li\u003e\n  \u003cli\u003eWarranty: One year quality guarantee from date of purchase\u003c\/li\u003e\n  \u003cli\u003eTip: Use the \"Select Your Vehicle\" tool on the product page to verify fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are typically required?\u003c\/h3\u003e\n\u003cp\u003eInstallation difficulty ranges from moderate to straightforward depending on sensor accessibility. Many users can complete replacement at home with basic hand tools; some applications may require lifting the vehicle or removing components to reach the sensor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: oxygen sensor socket, ratchet, penetrating oil, torque wrench\u003c\/li\u003e\n  \u003cli\u003eAllow time for cooling exhaust before attempting removal and replacement\u003c\/li\u003e\n  \u003cli\u003eIf connectors differ, compare part numbers or consult a technician before installing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This higherbro 4PCS Oxygen O2 Sensor kit is aimed at owners and mechanics who need a full set of upstream and downstream oxygen sensors for Chrysler group vehicles—especially Dodge Grand Caravan drivers—seeking OE-style replacements. It’s suitable for DIYers familiar with basic automotive repairs and professional shops that require a reliable aftermarket option. Always confirm vehicle fitment details on the product page before purchase to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2010 Dodge Grand Caravan 3.8L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check the \"Select Your Vehicle\" tool first; the kit commonly fits 2008–2011 Grand Caravan 3.6L\/4.0L variants, but confirm engine and connector match for 3.8L models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sensors plug-and-play replacements?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these higherbro sensors are designed as OE-style replacements with matching connectors, but verify harness compatibility before installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"higherbro","offers":[{"title":"Default Title","offer_id":67586731999417,"sku":"B09YM47P4V","price":146.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/higherbro-front-packaging.jpg?v=1790491684"},{"product_id":"sdyyds-oxygen-sensor-kit-for-toyota-camry-rav4-lexus-es300h-2-5l-upstream-234-9307-downstream-234-9304-oe-style-wiring","title":"SDYYDS Oxygen Sensor Kit for Toyota Camry\/RAV4 \u0026 Lexus ES300H 2.5L — Upstream 234-9307 + Downstream 234-9304, OE-Style Wiring","description":"\u003cp\u003e\u003cstrong\u003eThe SDYYDS 2X oxygen sensor kit replaces both upstream (234-9307) and downstream (234-9304) sensors for compatible 2.5L L4 Toyota and Lexus models, restoring accurate air-fuel readings and exhaust monitoring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your check-engine light points to an oxygen sensor issue or you want to proactively address aging sensors, this paired OE-style set fits specific 2018–2024 Toyota Camry, 2019–2024 RAV4, and 2019–2024 Lexus ES300H 2.5L inline-four engines. The kit comes with one upstream and one downstream sensor engineered with factory-length wiring and matching OE connectors so you can swap them without major wiring modifications. SDYYDS emphasizes installation ease, high-temperature resistance, and post-sale technical support.\u003c\/p\u003e\n\n\u003ch3\u003eHow will replacing both upstream and downstream sensors affect my vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eInstalling both sensors at once ensures the engine control unit receives consistent, accurate oxygen readings before and after the catalytic converter. That balanced data helps the ECU regulate fuel trim and monitor emissions effectively without conflicting inputs from a new sensor paired with an old one.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores consistent oxygen-sensing front and rear of the cat\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize fuel trim adjustments and idle quality\u003c\/li\u003e\n  \u003cli\u003eReduces risk of mismatched signals triggering codes\u003c\/li\u003e\n  \u003cli\u003eKeeps emissions monitoring accurate for inspections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these sensors compatible with my specific Camry, RAV4, or Lexus?\u003c\/h3\u003e\n\n\u003cp\u003eThe set lists fitment for 2018–2024 Toyota Camry 2.5L L4, 2019–2024 RAV4 2.5L L4, and 2019–2024 Lexus ES300H 2.5L L4, but you should verify the plug and sensor location before ordering. Vehicle model variations and mid-year changes can affect connector style and harness length, so compare the old part to the SDYYDS plug and wire layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePart numbers included: 234-9307 (upstream) and 234-9304 (downstream)\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle’s year, engine code, and existing connector type\u003c\/li\u003e\n  \u003cli\u003eConfirm sensor location and number of wires match your old unit\u003c\/li\u003e\n  \u003cli\u003eContact SDYYDS support with VIN or photos for fitment help\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what tools do I need?\u003c\/h3\u003e\n\n\u003cp\u003eThese sensors use OE-style connectors and wire lengths so they install like the originals; most DIYers with basic tools can complete the swap. Typical steps include safely lifting the vehicle, unbolting the old sensor with an oxygen sensor socket, unplugging the connector, installing the new sensor, and clearing any saved codes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires oxygen sensor socket, ratchet, and anti-seize (if recommended)\u003c\/li\u003e\n  \u003cli\u003eWire lengths match OE routing to avoid stretching or splicing\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant wiring resists vibration and corrosion\u003c\/li\u003e\n  \u003cli\u003eAllow engine cool-down and use penetrating oil for seized units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and guarantees come with the SDYYDS sensors?\u003c\/h3\u003e\n\n\u003cp\u003eSDYYDS provides after-sale assistance and aims for full customer satisfaction, offering troubleshooting help and response within 24 hours. If you encounter fitment questions or post-install issues, reach out with details and photos so the support team can advise solutions or replacement options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% satisfaction support and technical assistance promised\u003c\/li\u003e\n  \u003cli\u003eTypical 24-hour response window for customer inquiries\u003c\/li\u003e\n  \u003cli\u003eGuidance available for fitment, wiring, and code clearing\u003c\/li\u003e\n  \u003cli\u003eKeep your order and vehicle details handy when contacting support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This SDYYDS dual-sensor kit is aimed at owners and independent mechanics working on 2018–2024 Toyota Camry, 2019–2024 RAV4, or 2019–2024 Lexus ES300H 2.5L vehicles who need a direct-replacement upstream and downstream oxygen sensor pair. It suits drivers who prefer OE-style connectors and proper wire lengths for a cleaner, faster swap; fleet technicians who want matched sensors to avoid inconsistent signals; and DIYers comfortable with basic under-vehicle work. Always verify your vehicle’s connector type and sensor placement before purchase and contact SDYYDS support with VIN or photos if you’re unsure.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePart Number: 1×234-9307 (upstream) + 1×234-9304 (downstream)\u003c\/li\u003e\n  \u003cli\u003eFitment: 2018–2024 Toyota Camry 2.5L L4; 2019–2024 RAV4 2.5L L4; 2019–2024 Lexus ES300H 2.5L L4\u003c\/li\u003e\n  \u003cli\u003eInstallation: OE connectors, OE wire lengths, heat- and vibration-resistant wiring\u003c\/li\u003e\n  \u003cli\u003eNotes: Verify plug compatibility with existing parts; contact SDYYDS if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors fit my 2019 Toyota Camry 2.5L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They list compatibility with 2018–2024 Camry 2.5L, but confirm connector type and sensor location before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need to splice wires to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—these sensors use OE-style connectors and factory-length wiring to avoid splicing in most installations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SDYYDS","offers":[{"title":"Default Title","offer_id":67586735145145,"sku":"B0DG5Y5J9T","price":144.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/sdyy_ds-front-packaging-sensors.jpg?v=1790491836"},{"product_id":"tlyzscgkzy-o2-oxygen-sensor-kit-4-pack-for-chevy-gmc-silverado-sierra-upstream-downstream-direct-fit","title":"TLYZSCGKZY O2 Oxygen Sensor Kit 4-Pack for Chevy GMC Silverado Sierra – Upstream \u0026 Downstream Direct Fit","description":"\u003cp\u003e\u003cstrong\u003eThe TLYZSCGKZY 4-piece O2 oxygen sensor kit replaces upstream and downstream sensors (234-4669, 234-4407) to restore accurate air-fuel readings and improve drivability for compatible Chevy, GMC, Cadillac and Hummer engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your check engine light points to an oxygen sensor or your truck is running rough, this kit gives you both upstream and downstream sensors in one purchase. These sensors are engineered to match the original equipment fitment for numerous Chevy Silverado, Suburban, Camaro, Corvette and GMC Sierra, Yukon and related models, offering a direct-replacement option for worn or failed sensors without modifying wiring or mounts.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors affect engine performance and fuel use?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors measure exhaust oxygen levels so the engine control unit can adjust fuel delivery. Accurate O2 readings help the ECU maintain the intended air–fuel ratio, which supports smoother idle, consistent acceleration and optimal fuel consumption. Installing fresh sensors returns the system’s feedback loop to factory-like operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream sensors monitor combustion efficiency before the catalytic converter.\u003c\/li\u003e\n  \u003cli\u003eDownstream sensors check converter performance after exhaust treatment.\u003c\/li\u003e\n  \u003cli\u003eImproved sensor response reduces misfire, hesitation and rough idle.\u003c\/li\u003e\n  \u003cli\u003eHelps the ECU trim fuel for better economy and emissions control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this kit replace?\u003c\/h3\u003e\n\u003cp\u003eThis 4-pack is designed to be direct-fit for many GM models and replaces common OE numbers so you can swap sensors without selecting separate parts. Always verify compatibility against your vehicle’s year, engine and original part number before installing. The kit lists replacement numbers and a broad fitment range to simplify selection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers: 234-4669, 234-4407, 12600893, 12611870.\u003c\/li\u003e\n  \u003cli\u003eFits Chevy: Silverado 1500\/2500\/3500 (including Classic and HD), Suburban, Camaro, Corvette and Caprice variants.\u003c\/li\u003e\n  \u003cli\u003eFits GMC: Sierra 1500\/2500\/3500, Yukon\/Yukon XL and related HD\/classic models.\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for Cadillac Escalade (ESV\/EXT) and Hummer H2 in listed applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and testing?\u003c\/h3\u003e\n\u003cp\u003eThese sensors are supplied to match the original mounting and connector layout, so installation follows standard O2-sensor replacement steps. After fitting, the vehicle may need a short drive cycle for the ECU to relearn sensor behavior; error codes should clear once the system verifies proper readings. Basic hand tools and anti-seize on threads (if not pre-applied) are helpful for a smooth swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit connectors match factory wiring — no splicing required.\u003c\/li\u003e\n  \u003cli\u003eTorque sensors to manufacturer specs to avoid wiring stress or leaks.\u003c\/li\u003e\n  \u003cli\u003eClear fault codes after installation and perform a short drive cycle.\u003c\/li\u003e\n  \u003cli\u003eTest for stable idle and improved throttle response after learning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these sensors built and quality-checked?\u003c\/h3\u003e\n\u003cp\u003eEach oxygen sensor in the kit is manufactured from durable materials and undergoes testing to verify accurate detection of exhaust oxygen concentration. Quality checks focus on response time, signal stability and compatibility with factory emissions control strategies to ensure dependable operation under typical driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable construction resists heat and exhaust contaminants.\u003c\/li\u003e\n  \u003cli\u003ePerformance testing confirms accurate air–fuel mixture detection.\u003c\/li\u003e\n  \u003cli\u003eIntended to help prevent premature catalytic converter stress.\u003c\/li\u003e\n  \u003cli\u003eSold as an automotive replacement set for maintenance and repair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 4-piece TLYZSCGKZY O2 sensor kit is ideal for DIY mechanics and professional technicians servicing GM trucks and SUVs that list the referenced part numbers. Choose this kit when you need both upstream and downstream sensors to restore engine responsiveness, address emission-related codes, or replace aging sensors during routine maintenance. Before ordering, confirm the parts match your vehicle’s model year, engine type and original sensor numbers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors fit my Silverado or Sierra?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Silverado, Sierra and related GM models that use 234-4669 or 234-4407. Verify your vehicle year and original part number before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools and an O2 sensor socket are usually enough; follow torque specs and clear codes after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TLYZSCGKZY","offers":[{"title":"Default Title","offer_id":67586735014073,"sku":"B0GSNPYXGM","price":117.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tlyzscgkzy-front-packaging-chevy-gmc-o2-sensor-kit.jpg?v=1790491834"},{"product_id":"higherbro-oxygen-o2-sensor-kit-4pcs-for-dodge-jeep-chrysler-upstream-downstream-oe-fit","title":"higherbro Oxygen O2 Sensor Kit 4PCS for Dodge, Jeep \u0026 Chrysler — Upstream \u0026 Downstream OE Fit","description":"\u003cp\u003e\u003cstrong\u003eThe higherbro 4PCS Oxygen O2 Sensor 1 \u0026amp; 2 kit includes two upstream and two downstream sensors designed to restore accurate air-fuel readings for compatible Dodge, Jeep and Chrysler engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete four-piece sensor set replaces worn or failing oxygen sensors that monitor exhaust oxygen content and help the engine control module fine-tune fuel delivery. Each sensor is manufactured to match OE fitment for specific model years and engine sizes, and the kit comes with a one-year quality guarantee. Before purchasing, verify vehicle compatibility using your vehicle’s make, model, year and engine details.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines does this sensor set fit?\u003c\/h3\u003e\n\u003cp\u003eThese sensors cover a wide range of Dodge, Jeep and Chrysler models across multiple model years and engine displacements. The list includes popular Ram 1500\/2500\/3500 variants, Grand Cherokee configurations, Wrangler models and several Chrysler sedans and minivans. Confirm your vehicle’s exact engine code and model year to ensure a proper match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRam: 2002–2018 models including 3.7L, 5.7L, 5.9L, 8.3L and select 3.6L and 6.4L engines\u003c\/li\u003e\n  \u003cli\u003eJeep Grand Cherokee\/Liberty\/Wrangler: 2002–2020 coverage for 3.6L, 3.7L, 4.7L, 5.7L, 6.1L, 6.4L and 6.1L engines\u003c\/li\u003e\n  \u003cli\u003eChrysler 200\/300\/Town \u0026amp; Country and Dodge Grand Caravan: selected years 2005–2021 across 2.7L to 5.7L engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do upstream and downstream sensors in this kit function differently?\u003c\/h3\u003e\n\u003cp\u003eUpstream (pre-catalytic converter) sensors measure oxygen content in raw exhaust and provide rapid feedback to the engine computer for real-time air-fuel adjustments. Downstream (post-catalytic converter) sensors monitor converter efficiency and signal when the catalytic converter isn’t operating within expected parameters. Replacing both types together ensures balanced readings and consistent performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2x upstream sensors for immediate air-fuel ratio control\u003c\/li\u003e\n  \u003cli\u003e2x downstream sensors for catalytic converter monitoring and emissions checks\u003c\/li\u003e\n  \u003cli\u003eMatched set reduces cross-sensor variance and diagnostic confusion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard oxygen sensor replacement procedures and typically requires common hand tools and an oxygen sensor socket for best access. Allow the exhaust to cool before attempting removal, and inspect wiring harnesses and oxygen sensor connectors for corrosion or damage. If you encounter a check-engine light, clear codes after replacement and verify proper sensor operation with a scan tool if available.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic tools plus an O2 sensor socket recommended\u003c\/li\u003e\n  \u003cli\u003eCheck connectors and wiring; replace any frayed or corroded harnesses\u003c\/li\u003e\n  \u003cli\u003eClear diagnostic codes and confirm system readiness after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This higherbro 4PCS Oxygen O2 Sensor 1 \u0026amp; 2 kit is aimed at DIY mechanics, independent repair shops and vehicle owners restoring emissions performance or troubleshooting fuel-economy and drivability issues on supported Dodge, Jeep and Chrysler models. It’s especially useful when multiple sensors show age-related wear or when a complete complementary replacement of upstream and downstream sensors prevents mismatched sensor behavior. Always double-check fitment with your vehicle selector to ensure compatibility before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both upstream and downstream sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the set contains four sensors: two upstream and two downstream for complete replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is there a warranty with the higherbro oxygen sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the product includes a one-year quality guarantee covering manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"higherbro","offers":[{"title":"Default Title","offer_id":67586739011769,"sku":"B09YM3RK23","price":142.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/higherbro-front-packaging-oxygen-sensor-kit.jpg?v=1790491939"},{"product_id":"tautoy-oxygen-sensor-kit-4-pack-for-honda-acura-3-5l-2008-2014-upstream-downstream-stainless-steel","title":"TAUTOY Oxygen Sensor Kit 4-Pack for Honda \u0026 Acura 3.5L (2008–2014) — Upstream \u0026 Downstream, Stainless Steel","description":"\u003cstrong\u003eHigh-precision TAUTOY 4-piece oxygen sensor set delivers upstream and downstream sensing for compatible Honda and Acura 3.5L engines.\u003c\/strong\u003e\n\u003cp\u003eThis TAUTOY kit includes four oxygen (O2) sensors sized and matched for upstream and downstream positions, covering several Honda and Acura 3.5L models from 2008–2014. Each sensor is engineered with a laser-welded stainless steel housing and modern sensing elements to read exhaust oxygen levels and communicate that data to your vehicle’s engine control unit. The set is sold with OEM-compatible part numbers so you can verify fitment before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this 4-piece sensor kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit lists specific OEM part numbers and is intended for a range of Honda and Acura models powered by the 3.5L V6. Confirm both the part numbers and your vehicle year\/engine to ensure compatibility before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-compatible numbers included: 36531-R70-A01, 36532-R70-A01, 234-4461, 234-5098 (and variants 2344461, 2345098).\u003c\/li\u003e\n  \u003cli\u003eCommon fitment: Honda Odyssey (2011–2013 3.5L), Honda Accord (2008–2012 3.5L), Honda Pilot (2009–2011 3.5L), Honda Ridgeline (2009–2011 3.5L).\u003c\/li\u003e\n  \u003cli\u003eAlso fits Acura models: TSX and TL in overlapping 3.5L years (verify year\/engine code).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these sensors affect engine operation and fuel management?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors measure the oxygen content in exhaust gases so the engine control unit can adjust the air–fuel mixture. Accurate sensor readings help the engine maintain a balanced mixture, reducing rough running and preventing excessive emissions that trigger fault codes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream sensors monitor combustion to refine fuel injection and ignition timing.\u003c\/li\u003e\n  \u003cli\u003eDownstream sensors verify catalytic converter performance for emissions control.\u003c\/li\u003e\n  \u003cli\u003eReliable readings help avoid engine warning lights and can support proper fuel economy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and quality features are included in the TAUTOY sensors?\u003c\/h3\u003e\n\u003cp\u003eEach sensor uses a double laser-welded stainless steel body to resist corrosion and withstand exhaust temperatures. The design aims to provide stable, repeatable sensor signals under typical driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel housing for durability against heat and road contaminants.\u003c\/li\u003e\n  \u003cli\u003ePrecision sensing elements for consistent oxygen partial-pressure detection.\u003c\/li\u003e\n  \u003cli\u003ePre-shipment inspection and testing to reduce defective units on arrival.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and after-sale support does TAUTOY provide?\u003c\/h3\u003e\n\u003cp\u003eTAUTOY backs the sensor kit with a limited coverage window to protect against early failures. If you encounter issues within the stated period, contact the seller for replacement or support according to the terms provided.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWarranty term: 1-year replacement or coverage up to 50,000 km as stated by the seller.\u003c\/li\u003e\n  \u003cli\u003eProducts undergo inspection and testing before shipment.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available via the seller’s messaging channel for troubleshooting or replacement requests.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Mechanics, DIY enthusiasts, and vehicle owners driving Honda or Acura 3.5L models who need a full upstream-and-downstream sensor refresh. Choose this 4-piece TAUTOY set when you want OEM-compatible reference numbers, durable stainless housings, and a matched group of sensors to replace a failing bank of O2 sensors at once. Always verify the listed part numbers and vehicle fitment photos before ordering to ensure correct installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these TAUTOY sensors direct replacements for OEM part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit lists OEM-compatible numbers (36531-R70-A01, 36532-R70-A01, 234-4461, 234-5098); verify your vehicle's part number before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty does TAUTOY provide for this 4-piece sensor set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: TAUTOY offers a 1-year replacement or coverage up to 50,000 km; contact the seller for claims or questions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TAUTOY","offers":[{"title":"Default Title","offer_id":67586744582329,"sku":"B0F8Q286CN","price":151.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tautoy-front-packaging-4pcs-o2-sensors.jpg?v=1790492116"},{"product_id":"higherbro-oxygen-sensor-kit-for-jeep-wrangler-3-8l-2007-2010-4pcs-upstream-downstream-stainless-steel-fit","title":"higherbro Oxygen Sensor Kit for Jeep Wrangler 3.8L (2007–2010) — 4PCS Upstream \u0026 Downstream, Stainless Steel Fit","description":"\u003cp\u003e\u003cstrong\u003eThe higherbro 4PCS Oxygen Sensor kit replaces both upstream and downstream sensors on 2007–2010 Jeep Wrangler 3.8L models to restore accurate air-fuel readings and reliable exhaust monitoring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese four stainless-steel oxygen sensors are built to match the factory fitment for 2007–2010 Jeep Wrangler with the 3.8L V6, delivering analog signal output through flange-mount connectors for straightforward installation. The set includes two upstream (pre-catalyst) and two downstream (post-catalyst) sensors so you can replace sensors on both banks at once, which helps avoid mismatch-related diagnostic issues. A one-year quality guarantee backs the parts and the listing recommends verifying vehicle compatibility using the \"Select Your Vehicle\" tool before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWill this sensor kit fit my Jeep Wrangler 3.8L?\u003c\/h3\u003e\n\n\u003cp\u003eThese oxygen sensors are specified for 2007 through 2010 Jeep Wrangler models equipped with the 3.8L engine. Compatibility depends on the vehicle's exact model year, engine variant and any factory or aftermarket modifications, so cross-checking details is important.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Jeep Wrangler 2007, 2008, 2009, 2010 with 3.8L engine.\u003c\/li\u003e\n  \u003cli\u003eIncludes both upstream and downstream sensors for each bank (4 pieces total).\u003c\/li\u003e\n  \u003cli\u003eConfirm fit using the \"Select Your Vehicle\" tool (make, model, year, engine, notes).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what electrical type do these sensors use?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation uses a flange-mount design similar to original equipment which simplifies removal and replacement when access is available. The sensors provide an analog electrical signal output compatible with the vehicle’s factory wiring and engine control unit (ECU).\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFlange-mount for direct-fit replacement in existing sensor locations.\u003c\/li\u003e\n  \u003cli\u003eAnalog signal output designed for standard ECU input.\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools and an oxygen sensor socket typically needed for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features do higherbro sensors offer?\u003c\/h3\u003e\n\n\u003cp\u003eEach sensor is constructed from stainless steel to resist corrosion and heat exposure common in exhaust components. That material choice, combined with factory-style connectors and heat-tolerant internals, helps ensure longer service life under normal driving conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStainless steel housing for improved corrosion and heat resistance.\u003c\/li\u003e\n  \u003cli\u003eFactory-style flange and connector for secure fitment and signal integrity.\u003c\/li\u003e\n  \u003cli\u003eOne-year quality guarantee for peace of mind after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to avoid returns?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm your vehicle’s year, engine and any notes about emissions equipment using the site’s compatibility checker, and compare connector type to your existing wiring harness. If your Jeep has aftermarket exhaust components or has been modified, double-check sensor thread and mounting location to ensure fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse the \"Select Your Vehicle\" tool to match make, model, year, engine and notes.\u003c\/li\u003e\n  \u003cli\u003eVerify connector shape and thread pitch against the original sensor.\u003c\/li\u003e\n  \u003cli\u003eAccount for any aftermarket exhaust changes that might alter sensor locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: This higherbro 4PCS Oxygen Sensor set is aimed at Jeep owners and independent mechanics replacing worn or failing oxygen sensors on 2007–2010 Wrangler 3.8L vehicles, or anyone performing a full-bank service to avoid diagnostic confusion from mixed-age sensors. It’s also suitable for DIYers who prefer swapping all sensors at once rather than staging replacements, and for shops seeking a cost-effective, factory-style replacement backed by a one-year guarantee.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this set include both upstream and downstream sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit contains four sensors: two upstream (pre-catalytic) and two downstream (post-catalytic) sensors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is there a warranty on these oxygen sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, higherbro provides a one-year quality guarantee on this 4-piece sensor set.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"higherbro","offers":[{"title":"Default Title","offer_id":67586746384569,"sku":"B08CGM1KRC","price":140.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/higherbro-front-packaging-oxygen-sensor-jeep-wrangler.jpg?v=1790492194"},{"product_id":"automotive-leader-oxygen-o2-sensor-kit-for-honda-cr-v-2007-2009-2-4l-2-pack-heated-upstream-downstream-direct-fit","title":"Automotive-leader Oxygen O2 Sensor Kit for Honda CR-V 2007-2009 2.4L — 2-pack Heated Upstream \u0026 Downstream Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eAutomotive-leader 2-pack upstream and downstream heated oxygen sensors directly replace the factory O2 sensors on 2007–2009 Honda CR-V 2.4L models to restore accurate air-fuel readings and emissions performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two four-wire heated oxygen sensors (234-9062 upstream and 234-4359 downstream) are made as direct-fit replacements for Honda CR-V 2.4L (2007–2009) engines. Built to resist high temperatures and corrosion, they include factory-style connectors and wire lengths designed to match the originals so installation is straightforward for home mechanics and professional shops alike. Automotive-leader backs the pair with a two-year warranty and pre-shipment performance testing.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors affect my CR-V's engine performance?\u003c\/h3\u003e\n\u003cp\u003eOxygen sensors monitor exhaust oxygen content so the engine computer can adjust fuel delivery. Replacing worn or failing sensors helps the ECU maintain the correct air-fuel ratio, which supports smoother running and consistent combustion. Installing both upstream and downstream sensors ensures the system’s closed-loop feedback works as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpstream sensor (234-9062) measures pre-catalyst exhaust for fuel trims\u003c\/li\u003e\n  \u003cli\u003eDownstream sensor (234-4359) monitors catalytic converter efficiency\u003c\/li\u003e\n  \u003cli\u003eFour-wire heated design reduces warm-up time for accuracy\u003c\/li\u003e\n  \u003cli\u003eDirect-fit connectors and wire lengths for OEM-like installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these sensors fit my specific CR-V model and engine?\u003c\/h3\u003e\n\u003cp\u003eYes — this kit is specified for 2007, 2008 and 2009 Honda CR-V models with the 2.4L inline-4 gasoline DOHC engine (2354 cc). The part numbers match common OEM and aftermarket interchange lists so the sensors plug into the original wiring harness without modifications. Verify your vehicle’s engine code and connector type before ordering if in doubt.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2007–2009 Honda CR-V 2.4L (EX, EX-L, LX trims)\u003c\/li\u003e\n  \u003cli\u003eUpstream: part 234-9062 (compatible with OEM numbers listed)\u003c\/li\u003e\n  \u003cli\u003eDownstream: part 234-4359 (compatible with OEM numbers listed)\u003c\/li\u003e\n  \u003cli\u003eWire harness lengths: ~10.43 in (upstream) and ~10.75 in (downstream)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build and warranty details I should know?\u003c\/h3\u003e\n\u003cp\u003eAutomotive-leader sensors are built from heat- and corrosion-resistant materials and go through professional load testing before shipment. Each sensor is a four-wire heated type for faster activation and stable readings across temperature ranges. The kit includes a two-year warranty and responsive aftersale technical support.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeated 4-wire sensor design for quick warm-up and reliability\u003c\/li\u003e\n  \u003cli\u003eManufacturing tested for functionality under load before shipping\u003c\/li\u003e\n  \u003cli\u003eInterchangeable with many OEM numbers listed in the product details\u003c\/li\u003e\n  \u003cli\u003eTwo-year warranty and customer support with 24-hour response\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically plug-and-play for users with basic mechanical skills; the sensors use factory-style connectors and matched wire lengths. Use anti-seize on threads and a proper O2 sensor socket for safe removal and installation. If the check engine light persists after replacement, a code read\/clear and short drive cycle may be required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: O2 sensor socket, ratchet, penetrating oil, anti-seize compound\u003c\/li\u003e\n  \u003cli\u003eRecommended: clear diagnostic codes after install and verify drivability\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs; avoid contaminating the sensing tip\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if you're unfamiliar with exhaust work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Automotive-leader sensor kit is aimed at Honda CR-V owners and mechanics who need a reliable, direct-fit replacement for failing oxygen sensors on 2007–2009 2.4L models. It’s suitable for DIY installers wanting OEM-style connectors and for shops seeking a tested aftermarket option backed by warranty and technical support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors fit my 2008 Honda CR-V 2.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 234-9062 (upstream) and 234-4359 (downstream) are direct-fit for 2007–2009 CR-V 2.4L models, including EX, EX-L, and LX trims.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is special wiring or programming required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No reprogramming is needed; sensors plug into the factory harness. Clear any stored codes after installation if the check engine light remains.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Automotive-leader","offers":[{"title":"Default Title","offer_id":67586751070393,"sku":"B09BF7VQ48","price":116.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/automotive-leader-front-packaging.jpg?v=1790492402"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/dasbecan-front-packaging-altima-oxygen-sensor.jpg?v=1794521509","url":"https:\/\/redleafauto.ca\/collections\/oxygen-sensors.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}