{"title":"Partswcgg","description":"\u003cp\u003eBrowse 29 Partswcgg products at RedLeaf Auto, including trailer accessories and headlight \u0026amp; tail light assemblies. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"partswcgg-2-round-led-trailer-marker-lights-20-piece-kit-10-red-10-amber-ip67-waterproof","title":"Partswcgg 2\" Round LED Trailer Marker Lights 20-Piece Kit — 10 Red + 10 Amber, IP67 Waterproof","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 2-inch round LED trailer marker lights are a 20-piece kit with ten red and ten amber 4-LED flush-mount fixtures, rubber grommets, and 2-prong pigtails designed for durable 12V vehicle marking and clearance use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese compact flush-mount marker lights are built for trailers, trucks, UTVs and other 12V vehicles where clear side marker or clearance lighting is needed. Each lamp uses four bright LEDs inside an IP67-rated sealed housing, comes with a rubber grommet for snug installation, and connects via a simple two-wire pigtail. The kit contains 10 red and 10 amber units so you can outfit both sides or multiple vehicles at once.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights install and connect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: press the light into the rubber grommet mounted in a drilled hole and route the two-prong wires to your 12V circuit. The white lead is negative (ground) and the black lead is positive; units are designed for flush mounting with a recommended hole size around 2-5\/16\".\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOuter diameter: 2.5\"; inner bezel diameter: 2\"\u003c\/li\u003e\n  \u003cli\u003eMounting height with grommet: about 1\" (varies with seating)\u003c\/li\u003e\n  \u003cli\u003eDrill hole recommendation: 2-5\/16\" for a clean fit\u003c\/li\u003e\n  \u003cli\u003eWiring: white = negative, black = positive; 12V DC compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat visibility and durability features do these marker lights offer?\u003c\/h3\u003e\n\u003cp\u003eEach round lamp contains four LEDs to deliver noticeable illumination for side marking and clearance tasks without high current draw. The sealed housing and lens are sonically welded and rated IP67, so the units resist dust ingress and temporary submersion in water for dependable performance in wet or dirty conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour bright LEDs per housing for clear daytime and nighttime visibility\u003c\/li\u003e\n  \u003cli\u003eIP67 waterproof rating and sonic seal for weather resistance\u003c\/li\u003e\n  \u003cli\u003eRubber grommet provides vibration protection and a snug fit\u003c\/li\u003e\n  \u003cli\u003eLow-power LEDs for long life and reduced draw on 12V systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these lights serve multiple functions on my trailer?\u003c\/h3\u003e\n\u003cp\u003eThese flush-mount lamps can be used as either a side marker or as a front\/rear clearance light, but they are not multifunctional at the same time. If you require both side marker and clearance functions at the same mounting location, install two separate units to meet both signalling roles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse as side marker or front\/rear clearance—choose one function per unit\u003c\/li\u003e\n  \u003cli\u003eInstall two lights if both functions are needed at a single position\u003c\/li\u003e\n  \u003cli\u003eUniversal compatibility with most 12V vehicle lighting systems\u003c\/li\u003e\n  \u003cli\u003eIncluded colors: ten red and ten amber for proper side placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 20-piece Partswcgg LED marker light set is ideal for fleet owners, trailer builders, and DIY technicians who need reliable, compact side marker and clearance lighting. It suits semi-trailers, utility trailers, horse trailers, pickup trucks, UTVs and other 12V applications where rugged, waterproof fixtures and multiple matching units are required. If you want an affordable kit to replace faded lenses or to outfit several mounting points with consistent light output, this pack offers a ready-made solution with clear installation guidance and robust sealing for outdoor use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each unit is sonically sealed and rated IP67, protecting against dust and temporary submersion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wiring colors are positive and negative?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: White is negative (ground) and black is positive; they work with standard 12V DC systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67586545615033,"sku":"B0F3B95RP9","price":117.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-red-and-amber-pack.jpg?v=1790486643"},{"product_id":"partswcgg-led-trailer-marker-lights-20-pack-10-amber-10-red-2-round-9-led-12v-flush-mount","title":"Partswcgg LED Trailer Marker Lights 20-Pack (10 Amber, 10 Red) 2\" Round 9-LED 12V Flush-Mount","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 2\" round LED trailer marker lights are a 20-piece set (10 amber, 10 red) of 9-LED, 12V flush-mount side\/clearance lamps designed for universal fit on trailers and light-duty vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese compact 2-inch round LED lights deliver concentrated visibility using nine diodes in each lens, and come as a mixed pack to cover both front\/rear clearance and side marker requirements. Built with a two-prong pigtail (white negative, black positive) and a rubber grommet mounting, they are intended for typical 12 V DC systems found on trailers, RVs, trucks, ATVs and similar vehicles. Below you’ll find practical details about fit, wiring, installation and typical uses so you can decide whether they suit your rig.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights fit my trailer and what hole size do they need?\u003c\/h3\u003e\n\u003cp\u003eEach lamp is a flush-mount style designed to compress into a grommet for a neat finish. The outer bezel measures about 2-7\/8\", while the inner insert is roughly 2\"; installers typically cut a mounting hole near 2-1\/4\" for a secure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOuter diameter: ~2-7\/8\"\u003c\/li\u003e\n  \u003cli\u003eInner diameter (insert): ~2\"\u003c\/li\u003e\n  \u003cli\u003eRecommended drilling\/hole size: about 2-1\/4\"\u003c\/li\u003e\n  \u003cli\u003eMounting height with grommet: ~1\" (varies by insertion depth)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wiring steps are required to install the LED marker lights?\u003c\/h3\u003e\n\u003cp\u003eWiring is straightforward: each light has a two-conductor pigtail where white is the negative\/ground and black is the positive\/power lead. Confirm your trailer’s wiring polarity and fuse the circuit appropriately; using heat-shrink connectors or crimp terminals will improve durability against moisture and vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePower: 12 V DC systems\u003c\/li\u003e\n  \u003cli\u003eBlack lead = positive, White lead = negative\/ground\u003c\/li\u003e\n  \u003cli\u003eUse sealed connectors or dielectric grease for weatherproofing\u003c\/li\u003e\n  \u003cli\u003eFuse the circuit according to vehicle wiring guidelines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these markers perform as both side marker and clearance lights?\u003c\/h3\u003e\n\u003cp\u003eThese 2\" LEDs can serve either as a side marker or as a clearance light depending on where you mount them, but they are not intended to perform both functions simultaneously from the same unit. If regulations or your setup require both roles, install separate fixtures for each function at the required positions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNot dual-function simultaneously — choose one role per lamp\u003c\/li\u003e\n  \u003cli\u003eInstall additional lights if you need both side and clearance markers\u003c\/li\u003e\n  \u003cli\u003eColor placement matters: amber typically goes on the side\/front, red on the rear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and applications are these LEDs suited for?\u003c\/h3\u003e\n\u003cp\u003eThese universal 9-LED marker lights work across a broad range of 12V platforms including trailers, RVs, pickup trucks, semi trailers, ATVs, buses and marine tugs where compact, low-profile marker lighting is needed. They’re ideal for fleet maintenance, replacement parts, and new builds where consistent color and quantity are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with most 12V DC vehicles and trailers\u003c\/li\u003e\n  \u003cli\u003eGood for fleet or bulk replacement — pack of 20 (10 amber + 10 red)\u003c\/li\u003e\n  \u003cli\u003eFlush-mount design keeps lights protected from snagging\u003c\/li\u003e\n  \u003cli\u003e9 LEDs per lens for concentrated, energy-efficient illumination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Partswcgg 20-piece set is aimed at trailer owners, fleet managers, RV enthusiasts and DIY mechanics who need a reliable supply of compact, bright marker lights in both amber and red. It’s especially useful when replacing multiple worn fixtures or outfitting a new trailer where color-specific placement and a neat flush fit are important. If you require both side-marker and clearance functions, plan for separate fixtures per required location and follow local vehicle lighting regulations when mounting and wiring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many lights are included and what colors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This kit includes 20 lights total: 10 amber and 10 red, suitable for clearance and side marker placement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wiring convention do these lights use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They use a two-conductor pigtail: black is positive (power) and white is negative (ground).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67586598273209,"sku":"B0FKLGDPYT","price":133.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-pack-of-lights.jpg?v=1790487870"},{"product_id":"partswcgg-4-round-led-trailer-tail-lights-10-pack-red-12-led-ip65-flush-mount","title":"Partswcgg 4\" Round LED Trailer Tail Lights 10-Pack Red — 12-LED, IP65 Flush-Mount","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 10-pack 4-inch round LED trailer tail lights are a set of bright, low-current red 12-LED assemblies designed for flush-mounting on 12V trailers and trucks, supplied with rubber grommets and 3-prong pigtails for straightforward installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese round LED tail lights combine a compact 4\" inner lens with a 5-1\/8\" outer grommet ring to deliver stop, turn, brake and running-light functions in a single unit. Built to fit standard trailer cutouts and to resist weather exposure, the lamps use 12 efficient LEDs each to produce strong visibility while drawing less power than incandescent bulbs. The set includes ten matching lamps and the wiring harness ends for easier hookup.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights mount to a trailer?\u003c\/h3\u003e\n\u003cp\u003eThe fixtures are designed for flush installation using the included rubber grommet rings. You’ll need a roughly 4-1\/2\" hole for the grommet to seat properly and 1-3\/16\" depth clearance behind the panel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse a 4-1\/2\" hole saw for a clean opening.\u003c\/li\u003e\n  \u003cli\u003eInsert the light into the rubber grommet for a tight, vibration-resistant fit.\u003c\/li\u003e\n  \u003cli\u003ePush the assembly into the trailer body until the grommet sits flush.\u003c\/li\u003e\n  \u003cli\u003eConnect the 3-prong pigtail to the vehicle wiring or standard trailer plug.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wiring colors and functions should I expect?\u003c\/h3\u003e\n\u003cp\u003eWiring is color-coded for quick hookup: white is ground, red is the high-brightness feed, and black is the low\/steady light circuit. Each lamp supports stop\/turn\/brake and running functions when wired to a standard 12V trailer system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWhite — chassis ground connection.\u003c\/li\u003e\n  \u003cli\u003eRed — high brightness (stop\/turn\/flash feed).\u003c\/li\u003e\n  \u003cli\u003eBlack — low brightness \/ running light feed.\u003c\/li\u003e\n  \u003cli\u003eAccepted by 3-prong standard trailer connectors for compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights weatherproof and what vehicles are they for?\u003c\/h3\u003e\n\u003cp\u003eThe housings meet IP65-level protection, shedding rain and road spray, but they are not intended for continuous submersion. They work with almost any 12V vehicle that uses round, flush-mount tail lamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65-rated for dust and water spray resistance (not waterproof for underwater use).\u003c\/li\u003e\n  \u003cli\u003eSuitable for semi-trailer, utility trailer, horse trailer, enclosed trailer, pickup, UTV and similar 12V systems.\u003c\/li\u003e\n  \u003cli\u003e12 efficient LEDs per lamp for brighter light with lower current draw.\u003c\/li\u003e\n  \u003cli\u003eFlush-mount profile reduces snagging and protects the lens on rough roads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose and install for long-term reliability?\u003c\/h3\u003e\n\u003cp\u003ePick locations with enough rear clearance for the 1-3\/16\" thickness and ensure grommets are fully seated to keep moisture out. Use proper crimp connectors or waterproof butt-splices on the pigtails to maintain a durable electrical connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify 4-1\/2\" hole spacing and 1-3\/16\" depth before cutting panels.\u003c\/li\u003e\n  \u003cli\u003eSeal edges with silicone if mounting on thin metal for extra protection.\u003c\/li\u003e\n  \u003cli\u003eUse corrosion-resistant connectors and route wires away from sharp edges.\u003c\/li\u003e\n  \u003cli\u003eTest functions (stop, turn, running) before finalizing installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Installers, fleet managers and DIY trailer owners who need a bulk supply of dependable, low-draw red tail lights for multiple trailers or heavy-equipment fleets. If you want a flush-mount LED solution that replaces incandescent lamps with a compact, weather-resistant assembly and simple three-wire hookup, this 10-piece Partswcgg kit covers standard trailer applications and routine maintenance projects.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hole size is required to install these lights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Drill a hole about 4-1\/2 inches to accept the 5-1\/8\" grommet ring and 4\" inner lens.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights fully waterproof for submerged use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — they are IP65 rated for spray and rain but not intended for continuous underwater use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67586652897465,"sku":"B0B9RDLPY6","price":133.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-red-led-tail-light.jpg?v=1790489395"},{"product_id":"partswcgg-4-round-led-trailer-tail-lights-8-red-4-white-24-led-ip67-waterproof-flush-mount","title":"Partswcgg 4\" Round LED Trailer Tail Lights 8 Red + 4 White - 24 LED, IP67 Waterproof Flush-Mount","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 4\" Round LED Trailer Tail Lights are a waterproof, flush-mount 12V lighting kit with 24 LEDs per lamp, designed for stop\/turn\/tail and reverse functions on trailers and light trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 4-inch round LED lights come as a complete set with grommets and standard 3-prong pigtails for simple installation. Each red lamp houses 24 bright LEDs for clear stop, turn and tail signaling, while the white lamps function as reverse\/backup lights. The units are sonically sealed to IP67 standards so they resist dust and temporary submersion, and they run on 12V DC systems common to trailers, pickups, UTVs and small trucks.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights install on my trailer?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: the lights are designed as flush-mount units with rubber grommets and include 3-prong wire pigtails for power connections. You’ll generally need to drill a hole roughly 4.5 inches in diameter to seat each lamp, then connect ground, high and low wires to your trailer wiring harness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlush-mount design with rubber grommets for secure fit\u003c\/li\u003e\n  \u003cli\u003eStandard 3-prong pigtail: white = ground, red = high, black = low\u003c\/li\u003e\n  \u003cli\u003eOuter diameter 5.2\", inner diameter 4.1\", height ~1\" with grommet\u003c\/li\u003e\n  \u003cli\u003eWorks with 12V DC systems—no special adapter needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eEach LED lamp contains 24 LEDs that light faster and draw less current than incandescent bulbs, offering improved visibility and lower power consumption. The housing is sonically sealed and rated IP67, providing protection against dust and temporary water immersion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24 LEDs per lamp for brighter, quicker illumination\u003c\/li\u003e\n  \u003cli\u003eIP67 waterproof housing and lens—submersible in short durations\u003c\/li\u003e\n  \u003cli\u003eLower heat generation and reduced current draw versus incandescent\u003c\/li\u003e\n  \u003cli\u003eSonically sealed unit resists vibration and environmental exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich functions do the red and white lamps serve?\u003c\/h3\u003e\n\u003cp\u003eThe red round lights are multi-function: stop, turn, tail, running and marker duties. The white round lights act as reverse\/backup lamps to illuminate behind the vehicle. Wiring color codes make it easy to assign each lamp its intended role.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRed lamps: stop, turn signal, brake, tail and marker lights\u003c\/li\u003e\n  \u003cli\u003eWhite lamps: backup\/reverse illumination\u003c\/li\u003e\n  \u003cli\u003eWiring: white = ground, red = high output, black = low\/output\u003c\/li\u003e\n  \u003cli\u003eUniversal fit for trucks, trailers, pickups, UTVs and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about sizing and compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe visible mounting face measures roughly 5.2 inches across, with an inner bezel near 4.1 inches; plan for a 4.5\" hole for best fit. These lights are built for standard 12V systems and are compatible with most light-duty vehicles and trailers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOuter diameter: 5.2\"; inner diameter: 4.1\"; mount hole ~4.5\"\u003c\/li\u003e\n  \u003cli\u003eHigh with grommet about 1\" depending on fit depth\u003c\/li\u003e\n  \u003cli\u003eUniversal 12V compatibility—works on trailers and light trucks\u003c\/li\u003e\n  \u003cli\u003eSold as a set including grommets and pigtails for full installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, DIY trailer owners and fleet operators who want dependable, low‑power LED lighting for signaling and reversing will find this Partswcgg kit useful. It’s aimed at anyone needing weather‑resistant, quick‑response lights for trailers, pickups, UTVs or small trucks who prefer a flush, OEM‑style appearance and simple three‑wire hookup. If you need bright, sealed LED tail and backup lights that fit common 12V systems and withstand road conditions, this kit is built for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The lights are sonically sealed with an IP67 rating, resistant to dust and temporary submersion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these work on a standard 12V trailer wiring harness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They use a standard 3-prong pigtail (white ground, red high, black low) and run on 12V DC systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67586720923833,"sku":"B0FKL98P54","price":138.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-red-tail-light.jpg?v=1790491385"},{"product_id":"partswcgg-12v-led-trailer-tail-light-wire-kit-with-25ft-4-flat-harness-submersible-complete-lighting-set","title":"Partswcgg 12V LED Trailer Tail Light Wire Kit with 25ft 4‑Flat Harness — Submersible, Complete Lighting Set","description":"\u003cp\u003e\u003cstrong\u003eThe Partswcgg 12V LED Utility Trailer Tail Light Wire Kit is a complete, submersible lighting package that upgrades rear, side and ID lights and includes a 25ft 4-flat wiring harness for trailers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit combines square rear combination lights, mini oval side markers, a 15\" third brake light bar, a 14.17\" three-light identification marker, license plate illumination, mounting hardware and a long wiring harness so you can replace or upgrade trailer lights quickly. Each lamp is sealed for waterproof operation, and the wiring harness provides enough length to reach from most tow vehicles to the rear of common trailer decks.\u003c\/p\u003e\n\n\u003ch3\u003eWhat components are included and what do they do?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains every lamp and accessory needed for a full exterior lighting refresh on utility, boat, or general-purpose trailers. Lights perform standard functions—running, stop, turn, side marker, and clearance—while hardware and the bracket make installation straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 square rear combination tail lights (multi-function stop\/turn\/tail\/reflector)\u003c\/li\u003e\n  \u003cli\u003e6 mini oval side fender marker lights (2 red, 4 amber) for side visibility\u003c\/li\u003e\n  \u003cli\u003e2 × 15\" trailer third brake light bars for increased rear signaling\u003c\/li\u003e\n  \u003cli\u003e14.17\" 3-red LED identification\/clearance light bar for wide trailers\u003c\/li\u003e\n  \u003cli\u003e25ft 4-flat wiring harness with plug, license plate bracket, and mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this kit wired and which wires control each function?\u003c\/h3\u003e\n\u003cp\u003eThe harness and each lamp use conventional trailer color codes, with a few lamp-specific connections noted in the included wiring tips. Using standard colors lets you hook the kit to common 4-flat systems or splice into individual circuits if you have a custom setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSquare tail lights: white = ground, yellow = bright (brake\/turn), brown = low (running\/license)\u003c\/li\u003e\n  \u003cli\u003e15\" tail light bars: white = ground, red = bright (brake\/stop\/turn), black = low (running)\u003c\/li\u003e\n  \u003cli\u003eMini side markers: white = ground, black = positive supply for each marker\u003c\/li\u003e\n  \u003cli\u003e25ft harness: 4-flat connector standard for trailer-to-vehicle plug-and-play\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights waterproof and suitable for boat trailers?\u003c\/h3\u003e\n\u003cp\u003eYes—the LED housings are fully sealed so water cannot penetrate the circuit boards. The submersible design and durable materials make the kit appropriate for occasional submersion and wet environments found in boat-launching or saltwater use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFully sealed lamp housings prevent moisture ingress\u003c\/li\u003e\n  \u003cli\u003ePolycarbonate lenses plus stainless steel base on the ID bar resist corrosion\u003c\/li\u003e\n  \u003cli\u003eSurface-mount design simplifies installation on common trailer frames\u003c\/li\u003e\n  \u003cli\u003eRed and amber LEDs maintain visibility in heavy spray and rain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools or steps are typical?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be within reach of most DIYers familiar with trailer electrics. The kit includes mounting hardware and a long harness; basic tools and common wire connectors are usually all that's needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface-mount lamps bolt onto trailer frame using included hardware\u003c\/li\u003e\n  \u003cli\u003e25ft harness reaches from vehicle plug to rear lights on most trailers\u003c\/li\u003e\n  \u003cli\u003eFollow color-code wiring tips for correct function mapping and grounds\u003c\/li\u003e\n  \u003cli\u003eUse marine-grade sealant and corrosion-resistant fasteners for longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a utility, boat, or general-purpose trailer and need a comprehensive, weatherproof lighting upgrade that covers rear, side and clearance lighting, this Partswcgg kit is built to cover everything in one purchase. It suits do-it-yourself installers and small fleet operators who want a durable, sealed LED solution with a long wiring harness and the hardware required for a clean, compliant installation. For any questions about compatibility or wire connections, reach out to the seller for guidance before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the kit submersible for boat trailer use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. All lamps are fully sealed and designed to resist water ingress, suitable for occasional submersion and wet environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 25ft harness fit most trailers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The included 25ft 4-flat harness reaches most common trailer lengths; measure your trailer run to confirm adequate length.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67586778759353,"sku":"B0DYJS1BSW","price":133.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-square-tail-light-pair.jpg?v=1790493064"},{"product_id":"partswcgg-6-inch-oval-led-trailer-tail-lights-10-pack-red-12v-sealed-flush-mount-ip65","title":"Partswcgg 6 Inch Oval LED Trailer Tail Lights 10-Pack Red, 12V Sealed Flush Mount IP65","description":"\u003cstrong\u003ePartswcgg 6-inch oval LED trailer tail lights are a 10-piece set of sealed, flush-mount red stop\/turn\/tail lamps with 10 LEDs each, 3-prong plugs, rubber grommets, and IP65 splash resistance for 12V vehicles.\u003c\/strong\u003e\n\n\u003cp\u003eThese lights are built for trailers, trucks, and utility vehicles that need reliable, bright rear signaling without frequent bulb changes. Each oval lamp contains 10 LEDs that run on 12V DC, uses a standard 3-pin connector for quick hookup, and includes a rubber grommet for a clean, flush installation. The sealed lenses and IP65 rating protect the electronics from dust and water spray — though they are not designed for full submersion.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these LEDs improve visibility on trailers?\u003c\/h3\u003e\n\u003cp\u003eThe 10-LED configuration in each 6\" oval lens delivers a brighter, more even light output than comparable incandescent bulbs while drawing less current. That makes them easier to notice in daylight and at night, improving the visibility of brake and turn signals for following drivers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 LEDs per lamp for uniform illumination\u003c\/li\u003e\n  \u003cli\u003eRed lens optimized for stop and tail functions\u003c\/li\u003e\n  \u003cli\u003eLower amperage draw than traditional bulbs\u003c\/li\u003e\n  \u003cli\u003eSealed construction reduces fogging and corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation fast and straightforward?\u003c\/h3\u003e\n\u003cp\u003eEach tail light is designed for flush mounting using the included black rubber grommet and standard 3-prong wire plug pigtail. Wiring is color-coded (white ground, red high\/stop, black low\/tail) and the grommet accepts a roughly 6.6\" hole for a snug fit, so most installers can complete the swap with common tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes rubber grommets and 3-prong pigtails for plug-and-play hookup\u003c\/li\u003e\n  \u003cli\u003eColor-coded wires: white ground, red high, black low\u003c\/li\u003e\n  \u003cli\u003eApprox. 6.3\" inner diameter and 1.75\" thickness for mounting planning\u003c\/li\u003e\n  \u003cli\u003eFlush-mount design yields a clean, professional appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights durable enough for road and outdoor use?\u003c\/h3\u003e\n\u003cp\u003ePartswcgg built these fixtures with a sealed lens and IP65 splash resistance to withstand dust, road spray, and typical weather exposure. They are suitable for most on-road and off-road trailer applications, although they should not be used under water or in permanent submersion scenarios.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65 splash-resistant rating for protection against dust and spray\u003c\/li\u003e\n  \u003cli\u003eSealed housing minimizes moisture intrusion and corrosion\u003c\/li\u003e\n  \u003cli\u003eRobust lens and gasket for long-term outdoor performance\u003c\/li\u003e\n  \u003cli\u003eRated for 8–16V DC systems common in trailers and trucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 10‑piece set is ideal for fleet owners, trailer DIYers, restoration shops, and anyone replacing multiple tail lights at once. If you operate semi trailers, enclosed trailers, utility trucks, RVs, horse trailers, or pickup-based rigs and want durable, low-draw rear lighting that installs quickly with standard connectors, these Partswcgg oval LED tail lights are a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these tail lights fit standard 3-pin trailer connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each lamp includes a 3-prong plug pigtail compatible with standard 3-pin trailer wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these lights be used underwater?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They are IP65 splash-resistant but not rated for continuous submersion or underwater use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67586793701561,"sku":"B0BQJ24SWH","price":133.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-6-inch-oval-led-tail-light.jpg?v=1790493136"},{"product_id":"partswcgg-4-led-trailer-tail-lights-4-inch-red-24-led-flange-mount-pack-of-10","title":"Partswcgg 4\" LED Trailer Tail Lights 4-inch Red - 24 LED Flange Mount, Pack of 10","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 4\" round LED trailer tail lights are compact, flange‑mount red stop\/turn\/tail lamps with 24 LEDs designed for reliable 12V vehicle signaling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese flange‑mounted LED assemblies combine a durable polycarbonate housing with a chrome bezel and energy‑efficient LED arrays to replace incandescent trailer lights. Each lamp has a roughly 4\" inner lens (about 5.4\" overall with bezel), three‑wire hardwired connections for stop\/turn and running lights, and an IP65 rating to resist rain and road spray. They are supplied in a pack of ten units for fleet or multi‑trailer projects and are intended for 12V DC systems common on trucks, trailers, and utility vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these lights fit my trailer and what size hole do I need?\u003c\/h3\u003e\n\u003cp\u003eThese lights mount with an integrated flange around the chrome bezel, so you install them from the exterior surface. The lens assembly measures approximately 4\" inner diameter with an overall chrome ring near 5.4\", and the housing thickness is about 1.1\".\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCutout recommendation: drill a hole ≈ 4.4\" for the body to seat cleanly.\u003c\/li\u003e\n  \u003cli\u003eFlange mounting means the bezel covers the cutout for a finished look.\u003c\/li\u003e\n  \u003cli\u003eMeasure vehicle panel thickness to confirm the 1.1\" depth is compatible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wiring and functions do these LED tail lights provide?\u003c\/h3\u003e\n\u003cp\u003eEach lamp is hardwired with three conductors to deliver standard trailer signaling: a high‑brightness circuit for brake\/turn and a lower‑brightness circuit for running\/tail lights, plus ground. LEDs consume less current and light up faster than incandescent bulbs, improving visibility without overloading typical 12V systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWires: gray = ground, red = brake\/turn (high brightness), green = tail\/running (low brightness).\u003c\/li\u003e\n  \u003cli\u003eFunctions: stop light, turn signal, and tail\/running light in one unit.\u003c\/li\u003e\n  \u003cli\u003ePower: low current draw from 24 LEDs while providing bright illumination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights weatherproof and suitable for heavy‑duty use?\u003c\/h3\u003e\n\u003cp\u003eThe lamps use a polycarbonate lens and housing with a chromed plastic bezel engineered to handle road exposure. They carry an IP65 rating, protecting against dust and water jets, but they are not rated for continuous submersion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65 rated: resists rain, splashes, and road spray.\u003c\/li\u003e\n  \u003cli\u003ePolycarbonate construction for impact and UV resistance.\u003c\/li\u003e\n  \u003cli\u003eChrome bezel for a corrosion‑resistant finished appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many lights come in the set and when should I choose this pack?\u003c\/h3\u003e\n\u003cp\u003eThis listing supplies ten identical 4\" round red LED tail lights, which makes it practical for outfitting multiple trailers, replacing lights on large rigs, or keeping spares on hand. Buying a multi‑pack is cost‑effective for fleet maintenance or wholesale installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePack quantity: 10 pieces per order — useful for fleets or multi‑axle trailers.\u003c\/li\u003e\n  \u003cli\u003eConsistency: identical housings and wiring simplify installation across vehicles.\u003c\/li\u003e\n  \u003cli\u003eSupport: seller offers customer service via email with a 24‑hour reply promise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These Partswcgg 4\" round LED flange‑mount tail lights are aimed at trailer owners, fleet managers, and vehicle DIYers who need compact, energy‑efficient red stop\/turn\/tail lamps for 12V systems. They suit semi and utility trailers, enclosed trailers, horse trailers, pickups, UTVs, and similar vehicles where a low‑profile, bright, weather‑resistant light is required. If you want standardized replacement lamps in bulk with straightforward three‑wire installation, this ten‑piece pack is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lights work on 24V trucks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed for 12V DC systems. Using them on 24V without a voltage reducer may damage the LEDs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I submerge these lights underwater?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They are IP65 rated for spray resistance but not for continuous underwater use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67586846654649,"sku":"B0B9R5R2C4","price":125.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-flange-mounted.jpg?v=1790493970"},{"product_id":"partswcgg-2-5-round-led-trailer-marker-lights-amber-red-13-led-ip67-sealed","title":"Partswcgg 2.5\" Round LED Trailer Marker Lights — Amber \u0026 Red, 13-LED IP67 Sealed","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 2.5\" round LED trailer marker lights are compact, flush-mount 12V side\/clearance lights with 13 miro-reflex LEDs and an IP67-rated sealed housing for reliable visibility on trailers and trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese slim, flush-mount marker lights are designed for low-profile installation on trailers, trucks, UTVs and other 12V vehicles. Each unit contains a faceted reflector and 13 LEDs to boost perceived brightness while a rubber grommet and sonic seal make the assembly highly resistant to water and road debris. The set includes both amber and red lenses so you can outfit front\/side and rear positions as required.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright and visible are these 2.5\" marker lights?\u003c\/h3\u003e\n\u003cp\u003eThe combination of 13 LEDs plus a multi-faceted miro-reflex reflector directs and intensifies light output for clearer sight lines in traffic. They won’t replace large lamps but they noticeably improve side and clearance visibility at night and in poor weather.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e13 LEDs per unit for concentrated illumination\u003c\/li\u003e\n  \u003cli\u003eFaceted reflector increases perceived brightness\u003c\/li\u003e\n  \u003cli\u003eAvailable in amber and red for correct vehicle placement\u003c\/li\u003e\n  \u003cli\u003eSuitable for night and low-visibility conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights weatherproof and durable for heavy use?\u003c\/h3\u003e\n\u003cp\u003eYes — the lamp and lens are sonically sealed into an IP67-rated housing so the units withstand splashes, heavy rain and temporary submersion. The flush mount and rubber grommet reduce exposure to impacts and road grime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP67 waterproof rating: dust-tight and protected against temporary immersion\u003c\/li\u003e\n  \u003cli\u003eSonic-sealed construction to prevent moisture intrusion\u003c\/li\u003e\n  \u003cli\u003eRubber grommet for shock absorption and a snug flush fit\u003c\/li\u003e\n  \u003cli\u003eFlush design minimizes snagging on cargo or brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the Partswcgg 2.5\" LED trailer marker lights?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires no screws. Drill the recommended hole size, insert the supplied rubber grommet, feed the pigtail, and press the light into the grommet until it seats flush. Wiring uses a standard two-prong pigtail: white is negative, black is positive.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrill a hole approximately 2 to 2 2\/3 inches for grommet fit\u003c\/li\u003e\n  \u003cli\u003ePush grommet into hole, feed wire, then press light into grommet\u003c\/li\u003e\n  \u003cli\u003eTwo-prong pigtail: white = negative, black = positive\u003c\/li\u003e\n  \u003cli\u003eNo screws required; removal by pulling from the front if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these lights serve as both side markers and clearance lights?\u003c\/h3\u003e\n\u003cp\u003eEach unit can function either as a side marker or a clearance light, but not both at the same time. For locations that legally require dual function, install two separate lights: one set for side marking and another for front or rear clearance duties.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-function per unit: side marker OR clearance light\u003c\/li\u003e\n  \u003cli\u003eInstall separate units when both functions are required\u003c\/li\u003e\n  \u003cli\u003eComes in amber and red to meet placement requirements\u003c\/li\u003e\n  \u003cli\u003eUniversal for most 12V platforms including trailers and trucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: These Partswcgg 2.5\" LED marker lights are a practical choice for fleet owners, DIY trailer builders, pickup truck and utility vehicle owners who want low-profile, waterproof side and clearance illumination. They suit anyone needing easy, hardware-free installation and a durable sealed light that improves visibility without major electrical changes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What voltage do these Partswcgg lights use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed for 12V DC systems, common on trailers, trucks and many utility vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I wire the two-prong pigtail?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Connect white to vehicle ground (negative) and black to the positive running light circuit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67586849800377,"sku":"B0F6MQVZ1X","price":133.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-amber-and-red-pack.jpg?v=1790494126"},{"product_id":"partswcgg-12v-trailer-led-tail-light-kit-submersible-25ft-wiring-harness-complete-brake-marker-set","title":"Partswcgg 12V Trailer LED Tail Light Kit — Submersible 25ft Wiring Harness, Complete Brake\/Marker Set","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 12V Trailer LED Lights Tail Kit is a complete submersible lighting set that upgrades rear, side and third-brake illumination with a 25-foot harness and all mounting hardware included.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit bundles the main exterior trailer lighting you need in one package: two square rear combination tail lights with integrated license illumination, a 15.5\" third brake identification light bar, six mini oval side marker lamps, a long 25-foot wiring harness with 4-flat plug, license plate bracket, and mounting hardware. Every lamp is fully sealed for submersion, making the set suitable for boat trailers and road trailers alike. The components support stop, turn, tail, running, marker, reflector and license plate lighting functions so you can meet common trailer lighting needs in a single upgrade.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the kit simplify trailer lighting upgrades?\u003c\/h3\u003e\n\u003cp\u003eThe kit groups all primary trailer lights and necessary wiring into one package so you avoid sourcing individual parts. The included 25-foot harness reaches most trailer lengths and the 4-flat connector plugs into standard towing sockets, reducing installation time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete set: 2 square tail lights, 15.5\" third brake bar, 6 mini oval markers, harness, bracket, hardware\u003c\/li\u003e\n\u003cli\u003e25 ft wiring harness with 4-flat plug fits typical tow vehicles\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included for immediate installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights waterproof and reliable for boat trailers?\u003c\/h3\u003e\n\u003cp\u003eYes — each lamp is fully sealed and designed to resist water intrusion so circuits are protected during submersion or splash exposure. The robust housings and sealed LEDs reduce corrosion risk and preserve light output in wet environments.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFully sealed, submersible lamp bodies prevent water entry\u003c\/li\u003e\n\u003cli\u003eDurable LED diodes maintain brightness with low power draw\u003c\/li\u003e\n\u003cli\u003eStainless or corrosion-resistant hardware for marine use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat lighting functions and brightness should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe square tail lights and 15.5\" light bar provide multi-function output: tail\/running, brake\/stop, and turn signals. The square units use 15 diodes with an integrated white license lamp; the third-brake bar uses 11 high-visibility LEDs; mini markers provide side clearance and reflex visibility.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSquare tail lights: 15 LEDs each, built-in license illumination (3 white LEDs)\u003c\/li\u003e\n\u003cli\u003e15.5\" brake light bar: 11 LEDs for stop, turn and tail functions\u003c\/li\u003e\n\u003cli\u003eMini oval markers: 2 LEDs each for side clearance and reflex reflection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the wiring organized and what are the connections?\u003c\/h3\u003e\n\u003cp\u003eWiring colors follow common trailer conventions but vary by component: the square lights use a separate license lamp feed; the light bar and mini markers follow high\/low brightness and ground wiring designed for simple splicing to the harness. Follow the color guide when connecting to avoid reversed signals.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSquare tail lights: white = ground, yellow = brake high brightness, brown = running light\/left license\u003c\/li\u003e\n\u003cli\u003e15.5\" bar: white = ground, red = brake\/turn (high), black = running (low)\u003c\/li\u003e\n\u003cli\u003eMini markers: white = ground, black = positive lead\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: Boat owners, trailer builders and anyone wanting a single-package lighting upgrade will find this Partswcgg kit practical. It’s tailored to users who need submersible, multi-function trailer lighting with a long harness and included hardware—ideal for boat trailers, utility trailers and general-purpose towing where waterproofing and easy installation matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this lighting kit waterproof for boat trailers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. All fixtures are fully sealed and submersible to resist water intrusion for boat and splash-prone use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 25 ft harness include a standard connector?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The included 25-foot wiring harness terminates in a standard 4-flat plug compatible with most tow vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587067412665,"sku":"B0B9RCYXPS","price":104.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-square-tail-light-front-view.jpg?v=1790498793"},{"product_id":"partswcgg-2-5-round-led-trailer-marker-lights-10-pack-red-flush-mount-ip65-waterproof","title":"Partswcgg 2.5\" Round LED Trailer Marker Lights 10-Pack Red, Flush-Mount IP65 Waterproof","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 10-pack of 2.5\" round red LED trailer marker and clearance lights — flush-mount, IP65 waterproof units designed to improve visibility and replace or upgrade standard 12V trailer lighting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 10 red LED clearance\/marker lights by Partswcgg are compact, low-profile fixtures built for trailers, trucks, UTVs and other 12V vehicles. Each flush-mount lamp houses 13 bright LEDs inside a sonically sealed lens and housing rated IP65 for resistance to water and road spray. The set includes rubber grommets and two-prong pigtail wiring for straightforward installation and reliable operation on most trailer wiring systems.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright and visible are these 2.5\" trailer marker lights?\u003c\/h3\u003e\n\u003cp\u003eThe lights use 13 LEDs per unit to deliver a crisp, uniform red output that improves side and clearance visibility at night and in poor weather. Their compact lens focuses light outward while the bright diodes are easy for other drivers to see from a distance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e13 LEDs per light for consistent brightness\u003c\/li\u003e\n  \u003cli\u003eRed lens optimized for side and clearance signaling\u003c\/li\u003e\n  \u003cli\u003eFlush-mount design prevents snagging and reduces drag\u003c\/li\u003e\n  \u003cli\u003eVisible at typical trailer and highway distances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and mounting setups are these lights compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese 2.5\" round LEDs are universal for most 12V systems and commonly used on semi trailers, utility trailers, horse trailers, pickup trucks, UTVs and more. They are designed as flush-mount fixtures with rubber grommets and two-wire pigtails for easy wiring into existing harnesses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with standard 12V DC vehicle electrical systems\u003c\/li\u003e\n  \u003cli\u003eSuitable for semi trucks, utility trailers, horse trailers, pickups, UTVs\u003c\/li\u003e\n  \u003cli\u003eFlush mount with grommet—drill hole ≈ 2 2\/3\" for proper seating\u003c\/li\u003e\n  \u003cli\u003eTwo-prong pigtail wiring: black positive, white negative\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these marker lights weatherproof and durable for road use?\u003c\/h3\u003e\n\u003cp\u003eEach unit is sonically sealed to keep out moisture and debris, and the assembly carries an IP65 rating, making it resistant to water jets and road spray. The rugged housing and sealed lens help protect the LEDs and wiring from vibration and environmental exposure common in towing and off-road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSonically sealed housing for moisture protection\u003c\/li\u003e\n  \u003cli\u003eIP65-rated against water spray and dust ingress\u003c\/li\u003e\n  \u003cli\u003eDurable lens and body withstand road vibration\u003c\/li\u003e\n  \u003cli\u003eFlush mounting reduces physical exposure to impacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about wiring and installation before buying?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward but requires a correctly sized hole and attention to polarity. The outer diameter measures 3.5\", inner visible lens diameter is 2.5\", and effective mounted height with grommet is about 1\" depending on insertion depth.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrill hole approximately 2 2\/3\" for proper fit\u003c\/li\u003e\n  \u003cli\u003eBlack wire = positive (+), white wire = negative (−)\u003c\/li\u003e\n  \u003cli\u003eFlush mount with rubber grommet included for snug sealing\u003c\/li\u003e\n  \u003cli\u003eCannot function simultaneously as both side marker and clearance light—install separate units for each purpose\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers, fleet operators and DIY trailer owners who need a cost-effective, compact upgrade or replacement for red side marker and clearance lighting. If you run trailers, horse rigs, utility vehicles or off-road machines on 12V systems and want durable, sealed LEDs with simple flush-mount installation, this 10-piece Partswcgg set covers multiple mounting points and spares for future replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these lights run on any 12V trailer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are compatible with standard 12V DC vehicle wiring; match black to positive and white to negative.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these act as both side marker and clearance lights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Each unit performs one function; install separate lights for both side marker and clearance signaling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587308159161,"sku":"B0CB5M1DGN","price":100.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-packaging-red-led-marker-light.jpg?v=1790505364"},{"product_id":"partswcgg-4-round-amber-recessed-led-strobe-lights-4in-flush-mount-24-led-steady-or-rapid-flash","title":"Partswcgg 4\" Round Amber Recessed LED Strobe Lights — 4in Flush-Mount, 24-LED, Steady or Rapid Flash","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 4\" Round Amber Recessed LED Strobe Lights are compact, 24-LED flush-mount amber strobes designed for 10–30V vehicles, offering selectable solid or rapid-flash signaling in a waterproof, plug-and-play assembly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese recessed 4-inch amber LED strobe lights from Partswcgg combine a low-profile design with high-visibility LED output. Each lamp houses 24 LEDs in a sealed housing and includes a rubber grommet and three-prong pigtail for simplified installation. The unit supports both steady and quick-flash modes and operates across a broad 10–30V range, making it compatible with many truck, trailer, and utility vehicle systems.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I wire these lights for steady and strobe modes?\u003c\/h3\u003e\n\u003cp\u003eWiring is intentionally simple with three color-coded leads. White is ground; brown provides a steady amber turn-signal output; red activates the quick-flash strobe function. Use the included 3-prong pigtail for a direct connection to your vehicle harness, or splice into your wiring following standard safety practices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWhite = ground\u003c\/li\u003e\n  \u003cli\u003eBrown = steady amber signal\u003c\/li\u003e\n  \u003cli\u003eRed = rapid-flash strobe\u003c\/li\u003e\n  \u003cli\u003eCompatible with 10–30V DC systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights fit my trailer or truck — what are the installation dimensions?\u003c\/h3\u003e\n\u003cp\u003eThe lamp body has a 4-inch inner diameter with a grommet ring of approximately 5.3 inches and 1-inch overall thickness. For a clean flush-mount, plan a hole around 4.6 inches in diameter; the included rubber grommet helps ensure a snug, sealed fit. The compact depth is intended for most trailer walls and vehicle panels where recessed mounting is preferred.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 4 inches\u003c\/li\u003e\n  \u003cli\u003eGrommet ring outer ~5.3 inches\u003c\/li\u003e\n  \u003cli\u003eRecommended hole: ~4.6 inches\u003c\/li\u003e\n  \u003cli\u003eBody thickness: ~1 inch for recessed mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these LED strobes durable and weatherproof for outdoor use?\u003c\/h3\u003e\n\u003cp\u003ePartswcgg engineered these strobes to withstand harsh outdoor conditions. The units are sonically sealed and rated IP67, meaning they are dust-resistant and submersible for short periods, and the rugged construction resists vibration and moisture commonly encountered on trailers and utility vehicles. LEDs draw less current than incandescent equivalents while delivering brighter, longer-lasting illumination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP67-rated for dust and temporary submersion\u003c\/li\u003e\n  \u003cli\u003eSonic-sealed housing for vibration resistance\u003c\/li\u003e\n  \u003cli\u003e24 LEDs for brighter, lower-current output\u003c\/li\u003e\n  \u003cli\u003eWorks in varied weather and temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and applications are these lights best suited for?\u003c\/h3\u003e\n\u003cp\u003eThese 4-inch amber LED strobes are designed for a wide array of 10–30V vehicles and trailers. Common uses include semi-trailers, utility trucks, service vans, boats, parade floats, horse trailers, and off-road utility vehicles. Because they offer both steady and strobe outputs, they serve well for marker, turn, and attention signaling across commercial and recreational setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSemi trucks, trailers, and utility trailers\u003c\/li\u003e\n  \u003cli\u003eService vans, buses, and pickup trucks\u003c\/li\u003e\n  \u003cli\u003eBoat trailers, parade floats, and horse trailers\u003c\/li\u003e\n  \u003cli\u003eUTVs, UTEs, and other 10–30V equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Installers, fleet managers, and owners of trailers or utility vehicles who need a compact, weatherproof amber signaling light with flexible flash modes will find these Partswcgg 4\" recessed LEDs a practical choice. They suit anyone seeking easy plug-and-play installation, brighter LED output than incandescent bulbs, and robust sealing for outdoor environments. If you require visible amber signaling with low power draw and straightforward wiring, these strobes are built for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What voltage range do these strobe lights support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They operate on 10–30V DC, making them compatible with most trucks, trailers, and utility vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I switch between steady and strobe modes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use the brown wire for steady output and the red wire for quick-flash strobe; white is ground.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587335356601,"sku":"B0F1285YL3","price":104.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-recessed-amber-strobe.jpg?v=1790506361"},{"product_id":"partswcgg-6-oval-trailer-led-light-kit-4-red-multi-function-2-white-backup-10-led-ip65","title":"Partswcgg 6\" Oval Trailer LED Light Kit — 4 Red Multi‑Function + 2 White Backup, 10‑LED, IP65","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 6\" Oval LED Trailer Lights kit includes four red multi-function tail\/stop\/turn lamps and two white reverse lamps, each with 10 bright LEDs and plug-and-play 3-prong connectors for straightforward flush-mount installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis set of six oval LED lights is built for trailers and work vehicles that need reliable, energy-efficient rear illumination. Each lamp runs on 12V DC, uses 10 LEDs for high visibility while drawing minimal current, and comes with rubber grommets and 3-prong wire pigtails so you can replace or upgrade existing fixtures without complex rewiring. The housings are IP65 rated for weather resistance (not submersible) and the kit supports common vehicle voltages across trailers, trucks, vans, and utility equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights perform as brake, turn and tail signals?\u003c\/h3\u003e\n\u003cp\u003eThe four red oval lamps are multifunctional: they act as tail lights, brake lights and turn signals. LEDs light faster than incandescent bulbs, improving reaction visibility, and the lamp design concentrates brightness for a clear signal to following traffic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 LEDs per red lamp for intense, even illumination\u003c\/li\u003e\n  \u003cli\u003eDesigned for stop, brake and turn applications with distinct high\/low brightness wiring\u003c\/li\u003e\n  \u003cli\u003eLow power draw reduces load on vehicle circuits\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play 3-prong pigtails simplify swapping existing lights\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about the white reverse (backup) lights?\u003c\/h3\u003e\n\u003cp\u003eThe two white oval fixtures are dedicated reverse lamps to improve visibility when backing or loading at night. Their LED array provides a bright, wide beam that helps illuminate obstacles and loading areas without excessive current draw.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWhite LEDs optimized for reverse illumination\u003c\/li\u003e\n  \u003cli\u003eFlush-mount design with rubber grommet for a snug, vibration-resistant fit\u003c\/li\u003e\n  \u003cli\u003eAccepts standard 3-prong connectors for quick installation\u003c\/li\u003e\n  \u003cli\u003eIP65-rated housing protects against dust and water spray (not for underwater use)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these lights installed and wired?\u003c\/h3\u003e\n\u003cp\u003eInstallations are straightforward: the kit includes rubber grommets sized for a flush mount and 3-prong wire pigtails. The wiring convention is clear—white for ground, red for high\/bright circuit, black for low\/bright—so you can match the lamp leads to your trailer’s harness or use the supplied pigtails to connect.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApproximate grommet outer diameter: 7.5 inches; inner cutout ~6.3 inches\u003c\/li\u003e\n  \u003cli\u003eRecommended hole drilling ≈ 6.6 inches for proper fit\u003c\/li\u003e\n  \u003cli\u003e12V DC operation compatible with most trailers and trucks (8–16V systems)\u003c\/li\u003e\n  \u003cli\u003eFlush-mount with rubber grommet reduces water ingress and vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights fit my vehicle or trailer model?\u003c\/h3\u003e\n\u003cp\u003eThe lights are designed for wide compatibility and work with most 8–16V DC vehicles. They are commonly used on semi trailers, utility trailers, service trucks, buses, vans, horse trailers, pickup trucks, UTVs and floats. Confirm hole diameter and wiring match before purchase to ensure a proper fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for trailers, trucks, vans, buses, UTVs and more\u003c\/li\u003e\n  \u003cli\u003eWorks with standard 3-prong trailer wiring systems\u003c\/li\u003e\n  \u003cli\u003eIP65-rated for outdoor exposure and road use\u003c\/li\u003e\n  \u003cli\u003eNot intended for continuous underwater use (not submersible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Partswcgg 6\" oval LED kit is ideal for fleet managers, trailer owners, and DIY mechanics who want a bright, energy-efficient rear-lighting solution that’s easy to install. Choose this set if you need reliable multifunction red tail lights plus dedicated white backup lights that fit common trailer cutouts and reduce electrical load compared to incandescent fixtures. If you need help matching dimensions or wiring, contact the seller before purchase for guidance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights waterproof for trailer use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are IP65 rated for dust and water spray but not for continuous underwater use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lights fit standard trailer wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they include 3-prong pigtails and use white ground, red high, black low wiring compatible with most systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587465216185,"sku":"B0BQJ2NJS7","price":106.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-oval-led-tail-lights.jpg?v=1790508977"},{"product_id":"partswcgg-2-pc-trailer-light-box-kit-6-oval-red-led-tail-2-round-red-marker-welded-steel-sealed-pigtails","title":"Partswcgg 2-Pc Trailer Light Box Kit — 6\" Oval Red LED Tail \u0026 2\" Round Red Marker, Welded Steel, Sealed Pigtails","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 2-piece welded steel trailer light box kit includes two 6\" oval red LED tail lights and two 2\" round red LED side marker lights with grommets and pigtail connectors for a ready-to-install lighting solution.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis welded mount kit gives trailers a durable, weather-resistant light housing plus sealed LED lamps and wiring pigtails so you can replace or upgrade rear and side lighting quickly. The boxes are heavy-gauge steel with a black powder coat finish and pre-cut mounting holes sized for 6\" oval tail lights and 2\" round marker lights. Everything needed for mounting and hooking up the lights is included: grommets, 2- and 3-pin sealed pigtails, and two welded boxes sized to fit typical trailer frame rails.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit simplify trailer light replacement and installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit consolidates housing, lenses, grommets and sealed pigtails so you avoid multiple trips to match parts. Pre-cut holes reduce cutting and drilling on-site, and the welded boxes mount directly to frame rails for a clean, secure installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes welded steel boxes sized 8.78\" x 3.92\" x 3.82\" with pre-cut holes\u003c\/li\u003e\n  \u003cli\u003e6\" oval tail light hole and 2.25\" round side light hole already punched\u003c\/li\u003e\n  \u003cli\u003eSealed 2- and 3-prong pigtails for quick hardwiring\u003c\/li\u003e\n  \u003cli\u003ePowder-coated finish resists corrosion and adds a finished look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the light specifications and wiring conventions?\u003c\/h3\u003e\n\u003cp\u003eThe 6\" oval tail lights are 10-LED units in a red lens with a 3-prong sealed pigtail. The 2\" round marker lights are 4-LED red lamps with 2-prong sealed pigtails. Wiring follows common trailer color codes to simplify connection to your harness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" oval light: 7.25\" L x 3.1\" W, 10 red LEDs, 3-prong pigtail (white = ground, red = brake\/turn\/high, black = running\/low)\u003c\/li\u003e\n  \u003cli\u003e2\" round marker: outer diameter 2.5\", inner 2.0\", 4 LEDs, 2-prong pigtail (black = ground, red = positive)\u003c\/li\u003e\n  \u003cli\u003eRubber grommets included for flush, watertight mounting\u003c\/li\u003e\n  \u003cli\u003eSealed connectors help protect against moisture and road contaminants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the steel boxes durable and suited for all-weather use?\u003c\/h3\u003e\n\u003cp\u003eThe mounting boxes are fabricated from heavy-duty steel and finished with a black powder coat to resist rust and abrasion. They are designed to withstand road vibration and exposure, providing a robust enclosure for the lights and wiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-gauge steel construction welded for added strength\u003c\/li\u003e\n  \u003cli\u003eBlack powder-coated finish for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003ePre-cut wire access and light openings minimize additional work\u003c\/li\u003e\n  \u003cli\u003eIntended for exterior trailer frame mounting in typical towing environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Partswcgg kit is aimed at trailer owners, fabricators, and fleet maintenance technicians who need a reliable, ready-made solution for rear and side lighting. It's useful when replacing damaged housings or upgrading to sealed LED lights for improved visibility and lower maintenance. If you want an all-in-one package—steel housing, LED lamps, grommets, and sealed pigtails—this kit offers a straightforward fit for many utility trailers, boat trailers, car haulers, and commercial rigs. A one-year warranty is included to cover manufacturing defects.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the lights come with wiring connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes sealed 3-prong and 2-prong pigtails for the oval and round lights respectively, plus rubber grommets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the steel boxes be bolted instead of welded?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — you can weld or bolt the boxes to the trailer frame; pre-cut holes accommodate mounting and wiring access.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587468099769,"sku":"B09YH97SSR","price":110.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-welded-steel-light-boxes.jpg?v=1790509121"},{"product_id":"partswcgg-4-round-dual-color-led-trailer-tail-lights-red-white-4-pack-19-led-ip67-waterproof","title":"Partswcgg 4\" Round Dual-Color LED Trailer Tail Lights - Red\/White 4-Pack, 19-LED IP67 Waterproof","description":"\u003cp\u003e\u003cstrong\u003eThese Partswcgg 4\" round dual-color LED tail lights combine red stop\/turn\/brake functions with white reverse illumination in a single IP67-rated, flush-mount lamp.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for trailers, trucks, and other 8–16V DC vehicles, this four-piece set delivers bright, multi-function lighting in a compact 4\" housing. Each lamp uses 19 LEDs that switch between red for tail\/stop\/turn and white when reverse is engaged. The fixtures are sonically sealed with rubber grommets and provide a straightforward install with three-prong pigtails plus an auxiliary backup wire.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights handle multiple functions in one compact unit?\u003c\/h3\u003e\n\n\u003cp\u003eEach assembly contains LEDs configured to emit red for running, brake and turn signals and white for reverse when the auxiliary wire is powered. The design allows the white reverse output to override the red LEDs when the reverse circuit is activated, so you only need one lamp per mounting point for both uses.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e19 LEDs per lamp for strong visibility\u003c\/li\u003e\n  \u003cli\u003eWhite reverse circuit overrides red output via a dedicated blue auxiliary wire\u003c\/li\u003e\n  \u003cli\u003eFlush-mount with rubber grommet for a sealed fit\u003c\/li\u003e\n  \u003cli\u003eCompact 4\" round footprint fits tight mounting spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wiring and installation steps should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eWiring is simple: the kit includes standard three-prong pigtails and a short male bullet plug for the reverse circuit. The housings are approximately 5.1\" diameter overall with a 1.1\" depth, and they typically require a ~4.5\" mounting hole. Seal the grommet into the hole and connect each colored conductor to the corresponding vehicle circuit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWhite wire: ground\/return\u003c\/li\u003e\n  \u003cli\u003eRed wire: stop\/turn\/brake feed\u003c\/li\u003e\n  \u003cli\u003eBlack wire: tail\/running light\u003c\/li\u003e\n  \u003cli\u003eBlue short lead with male bullet plug: reverse\/backup input\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights durable and suitable for harsh conditions?\u003c\/h3\u003e\n\n\u003cp\u003eThese LEDs are sonically sealed and rated IP67, meaning they resist dust and can withstand temporary immersion in water. The rubber grommet and sealed construction help prevent moisture ingress at the mounting point, making them appropriate for exposed trailer and marine environments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP67-rated housing for dust and water protection\u003c\/li\u003e\n  \u003cli\u003eSonic sealing plus rubber grommet reduces leak risk\u003c\/li\u003e\n  \u003cli\u003eRobust LEDs designed for vibration-prone vehicles\u003c\/li\u003e\n  \u003cli\u003eFits 8–16V DC electrical systems common to trailers and trucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and applications work best with these lamps?\u003c\/h3\u003e\n\n\u003cp\u003eThese 4\" dual-purpose LEDs are made for a wide range of commercial and recreational vehicle uses. They’re compact enough for utility and enclosed trailers yet bright enough for larger trucks, buses, and specialty vehicles where combined tail and reverse lamps reduce the number of fixtures needed.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSemi trailers, flatbeds, and enclosed cargo trailers\u003c\/li\u003e\n  \u003cli\u003eService vans, utility trucks, buses, and pickup trucks\u003c\/li\u003e\n  \u003cli\u003eBoat and horse trailers, parade floats, and UTV\/UTEs\u003c\/li\u003e\n  \u003cli\u003eAny 8–16V DC vehicle requiring combined stop\/turn\/reverse lights\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: installers, fleet managers, and DIY trailer owners who want a compact, multi-function lamp that reduces the number of fixtures needed while improving visibility. If you need reliable, sealed LED tail lights that handle stop, turn, running, and reverse duties in one compact 4\" round package, this Partswcgg 4-piece kit is built to simplify wiring and withstand outdoor conditions. For support after purchase, Partswcgg offers customer assistance via email with a typical response within 24 hours.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lights work with 12V trailer systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they are compatible with 8–16V DC systems, including standard 12V trailer electrical setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire is used for the reverse light function?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The short blue wire with a male bullet plug supplies the white reverse light; white is ground, red brake, black tail.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587478454457,"sku":"B0CFLF8DQW","price":94.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-facing-4in-dual-led-tail-light.jpg?v=1790509553"},{"product_id":"partswcgg-6-oval-led-trailer-tail-lights-4-pack-red-stop-turn-with-white-backup-ip67-waterproof","title":"Partswcgg 6\" Oval LED Trailer Tail Lights 4-Pack — Red Stop\/Turn with White Backup, IP67 Waterproof","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 4Pcs 6\" oval dual stop\/turn tail lights combine bright red LED running, stop and turn signals with a dedicated white reverse light in one flush-mount housing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 6-inch oval trailer lights are built for trailers, trucks and utility vehicles that need a compact, dual-color LED solution. Each lamp houses 12 LEDs that operate as red stop\/turn\/running lights and switch to white for reversing via an auxiliary lead. The kit includes four lights, rubber grommets and three-prong pigtails for straightforward wiring and a clean flush installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights handle dual-color operation?\u003c\/h3\u003e\n\u003cp\u003eEach oval lamp uses the same LED array to emit red for stop\/turn\/running and white for reverse. A separate auxiliary wire triggers the white reverse function so the red output is overridden when backing up.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12 LEDs per lamp produce clear red signal illumination.\u003c\/li\u003e\n  \u003cli\u003eBlue auxiliary wire with a male bullet plug activates white reverse mode.\u003c\/li\u003e\n  \u003cli\u003eWhite reverse output overrides red signals for safe backing visibility.\u003c\/li\u003e\n  \u003cli\u003eStandard three-prong pigtail for power\/ground\/tail functions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation steps and size requirements?\u003c\/h3\u003e\n\u003cp\u003eThese lights are designed for flush mounting with rubber grommets and require a roughly 6.5\" mounting hole. Wiring follows a simple color code so you can fit them to most trailers and trucks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall lamp dimensions: approximately 7.4\" long by 3.2\" thick.\u003c\/li\u003e\n  \u003cli\u003eDrill a 6.5\" hole for the flush mount and seat the rubber grommet.\u003c\/li\u003e\n  \u003cli\u003eWiring: white = ground, red = stop\/turn, black = tail running, blue (bullet plug) = reverse.\u003c\/li\u003e\n  \u003cli\u003eIncluded three-prong pigtails and plugs speed installation on standard 12–16V DC systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights weatherproof and suitable for heavy use?\u003c\/h3\u003e\n\u003cp\u003eYes — the housings are sonically sealed and rated to IP67 for waterproof performance. They are built for outdoor exposure and can withstand rain, splashes and occasional submersion, making them dependable on road or water trailers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP67 submersible rating protects internal LEDs and circuitry.\u003c\/li\u003e\n  \u003cli\u003eSonic sealing keeps moisture and contaminants out of the lens and housing.\u003c\/li\u003e\n  \u003cli\u003eDurable construction suited to commercial vehicles and recreational trailers.\u003c\/li\u003e\n  \u003cli\u003eOperational across typical 8–16V DC vehicle electrical systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and uses are these lights compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese 6\" oval LED combos fit a wide variety of trailers and utility vehicles that require compact, multi-function exterior lighting. They’re common on commercial trailers, pickup trucks, boats and specialty rigs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with semi trailers, utility trailers, horse trailers, boat trailers and more.\u003c\/li\u003e\n  \u003cli\u003eWorks with service trucks, buses, vans, UTVs and pickup trucks on 8–16V systems.\u003c\/li\u003e\n  \u003cli\u003eIdeal for retrofitting older incandescent lights with brighter LED performance.\u003c\/li\u003e\n  \u003cli\u003eGood for parade floats and specialty vehicles where compact dual-function lights are needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you need compact, reliable trailer lighting that combines red stop\/turn\/tail functions with a bright white reverse light, the Partswcgg 6\" oval LED set is designed for fleet managers, trailer owners and DIY mechanics who want a weatherproof, easy-to-install upgrade. The included grommets and wired pigtails make it practical for both professional installs and weekend retrofit projects, and the IP67 sealing helps ensure long-term outdoor performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lights fit a standard trailer wiring harness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They use a standard three-prong pigtail for tail\/stop\/ground plus an auxiliary reverse wire with a bullet plug.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights fully waterproof for boat trailer use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are sonically sealed and rated IP67, suitable for exposure to water and wet conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587507093689,"sku":"B0CFLDWK94","price":94.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-oval-tail-light.jpg?v=1790510959"},{"product_id":"partswcgg-6-oval-led-trailer-tail-backup-light-kit-7-piece-ip68-sealed-25ft-harness","title":"Partswcgg 6\" Oval LED Trailer Tail Backup Light Kit — 7-Piece IP68 Sealed, 25ft Harness","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 6\" Oval LED Trailer Tail Backup Light Kit is a complete 7-piece lighting system that combines dual 6\" oval stop\/tail\/turn lamps with built-in reverse LEDs, a 13.8\" third-brake ID bar, six mini marker lights, a 25ft 5-pin wiring harness, and four reflective stickers for safe, weatherproof trailer illumination.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit was designed to replace or upgrade trailer lighting for flatbeds, utility trailers, horse trailers and other tow rigs that need a 6\" oval lamp configuration with integrated reverse. Every electrical and mounting component required for installation is included, and the lights are sealed to IP68 standards so they resist water and road debris. The system uses a 5-pin flat plug tailored for oval lamps that include a white backup circuit, which differs from typical 4-pin setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these oval LED tail lights improve visibility at night?\u003c\/h3\u003e\n\u003cp\u003eThe 6\" oval assemblies use 23 LEDs per lamp (16 red for tail\/stop\/turn and 7 white for reverse) delivering bright, even illumination visible from a distance. The 13.8\" red LED bar serves as a clear center-mounted ID\/third-brake light to complement the outer lamps and alert following drivers during braking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e23 high-output LEDs in each oval lamp for distinct stop\/turn and backup signals\u003c\/li\u003e\n  \u003cli\u003e13.8\" LED brake bar with 15 bright LEDs for center high-mount visibility\u003c\/li\u003e\n  \u003cli\u003eSeparate white reverse LEDs reduce confusion between tail and backup lights\u003c\/li\u003e\n  \u003cli\u003eReflective stickers add passive night visibility when lights are off\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat mounting and build features help the lights last outdoors?\u003c\/h3\u003e\n\u003cp\u003eThe oval lamps come with heavy-duty steel mounting brackets coated to resist rust and maintain a firm attachment to trailer frames. The housings are fully sealed to IP68, protecting internal electronics from immersion, road spray and dust, which helps the LEDs stay reliable season after season.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel mounting brackets included for secure, corrosion-resistant attachment\u003c\/li\u003e\n  \u003cli\u003eIP68-rated sealed housings for submersible waterproof protection\u003c\/li\u003e\n  \u003cli\u003eCompact marker lights and brake bar designed for surface mounting on trailers\u003c\/li\u003e\n  \u003cli\u003eDurable LED diodes with long life and impact-resistant lens covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the kit wired and what connectors are included?\u003c\/h3\u003e\n\u003cp\u003eThe set includes a 25ft wiring harness ending in a 5-pin flat plug configured specifically for oval lamps with a dedicated white reverse circuit. Color-coded leads simplify hookup: white is ground, red is the brighter stop\/turn circuit, and black carries low-intensity tail\/running power. An extra 180° bullet-style male plug on a short blue lead powers the white reverse LEDs on the oval lamps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e25ft 5-pin flat harness designed for oval lamps with white reverse wire\u003c\/li\u003e\n  \u003cli\u003eColor-coded wires: white = ground, red = stop\/turn, black = tail running\u003c\/li\u003e\n  \u003cli\u003eAdditional bullet-style plug on blue wire for the reverse circuit\u003c\/li\u003e\n  \u003cli\u003eClear wiring layout reduces installation time and confusion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? This Partswcgg lighting package fits owners who need a full trailer lighting overhaul or upgrade to LED technology—particularly those with trailers that call for 6\" oval lamps and a separate reverse light. It suits do-it-yourself installers, fleet maintenance teams, and anyone who wants a single purchase that includes lamps, brackets, a long harness and markers. The waterproof build and included hardware make it practical for daily-use trailers, work rigs and recreational towing where weather resistance and visibility matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include the wiring harness and plugs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes a 25ft 5-pin flat wiring harness sized for oval lamps and an extra bullet-style plug for the reverse circuit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the lights waterproof for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The lamps are sealed to IP68 standards for submersible waterproof protection and road durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587514892473,"sku":"B0DSVPJNHW","price":102.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-6in-oval-led-front-view.jpg?v=1790511350"},{"product_id":"partswcgg-submersible-12v-led-trailer-tail-light-kit-25ft-wiring-harness-ip68-waterproof","title":"Partswcgg Submersible 12V LED Trailer Tail Light Kit — 25ft Wiring Harness, IP68 Waterproof","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg's Submersible 12V LED Trailer Tail Light Kit delivers a complete, waterproof lighting solution for trailers with a 25-foot wiring harness and multi-function LEDs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one trailer lighting set contains everything needed to upgrade visibility and durability on trailers, boat trailers, campers, trucks and other utility vehicles. Built to resist immersion and road spray, the kit combines combination tail lights, a center brake light bar, multiple side markers, reflective decals and a long wiring harness so you can install a full lighting system without sourcing extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat components come with the Partswcgg 12V Submersible LED kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is packaged to provide a full roadside-compliant light setup in one box. It includes combination rear lights, a center brake light bar, side markers, reflective stickers, mounting hardware and a long wiring harness with a 4-flat plug for common trailer connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 rectangular stop\/turn\/tail combination lights with built-in license plate illumination\u003c\/li\u003e\n  \u003cli\u003e1 low-profile 13.8\" LED center brake\/tail\/turn light bar\u003c\/li\u003e\n  \u003cli\u003e8 mini oval side clearance\/marker lights (2 red, 6 amber)\u003c\/li\u003e\n  \u003cli\u003e4 reflective stickers, license plate bracket, mounting screws and 25 ft wiring harness (22 ft + 4 ft)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit perform in wet or marine environments?\u003c\/h3\u003e\n\u003cp\u003eThese LED fixtures are fully sealed to an IP68 level, which minimizes the risk of water intrusion even when exposed to heavy spray or temporary submersion. That makes the set suitable for boat trailers and other applications where lights may encounter moisture or road salt.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP68-rated seals prevent water from reaching circuit boards\u003c\/li\u003e\n  \u003cli\u003eDurable housings resist corrosion and road debris\u003c\/li\u003e\n  \u003cli\u003eDesigned for trailers, boats, campers, trucks and farm equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wiring and light functions should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eThe lights provide standard stop, turn and tail functions plus side markers and rear reflex coverage. The kit includes color-coded wiring for straightforward hookup; follow the included wiring notes to match grounds, running lights and brake\/turn signals correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRectangular combo lights: white = ground, yellow = brake\/turn high brightness, brown = running light\u003c\/li\u003e\n  \u003cli\u003eCenter bar: white = ground, red = brake\/turn, black = running light\u003c\/li\u003e\n  \u003cli\u003eMini markers: black = ground, red = positive; 4-flat plug supplied for vehicle connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow bright and visible are the LEDs compared with standard trailer bulbs?\u003c\/h3\u003e\n\u003cp\u003eThe LEDs use multiple diodes per fixture to create clear stop, turn and tail illumination with quick response and high visibility. The low-profile rectangular units and the center light bar combine several LEDs to improve recognition distance compared with single-filament bulbs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRectangular tail lights: 24 diodes plus a 6-LED license plate illuminator on the driver side\u003c\/li\u003e\n  \u003cli\u003e13.8\" center bar: 11 LEDs for stop, tail and turn signals\u003c\/li\u003e\n  \u003cli\u003eMini oval markers: 2 diodes each for efficient side visibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: This Partswcgg set is ideal for trailer owners who want a durable, plug-and-play lighting upgrade that resists weather and splash. It's suited to boat trailer owners, small-business fleets, RV and camper owners, landscapers, farmers and anyone replacing faded incandescent lights with reliable LED units. If you tow, launch or park in wet conditions and need clearer, longer-lasting signaling and marker lights, this kit provides a convenient, comprehensive option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this lighting kit waterproof for boat trailers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The fixtures are IP68-sealed to resist water intrusion and temporary submersion, suitable for boat trailers and wet conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a wiring harness and plug?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It comes with a 25-foot wiring harness (22 ft + 4 ft) and a 4-flat plug for standard trailer connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587515416761,"sku":"B0DSVN7MTJ","price":104.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-rectangular-combination-tail-light.jpg?v=1790511396"},{"product_id":"partswcgg-75-led-trailer-tail-light-bars-2-pack-red-amber-white-ip68-waterproof-multi-function","title":"Partswcgg 75-LED Trailer Tail Light Bars 2-Pack — Red\/Amber\/White, IP68 Waterproof, Multi-Function","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 2-piece 75-LED trailer tail light bars are surface-mounted, multi-function lamps (red\/amber\/white) designed for 10V–30V vehicles and built to IP68 waterproof standards.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese LED light bars combine brake, turn, running and reverse functions into a compact, sonic-sealed housing that resists water intrusion and impact. Each bar contains 75 LEDs (25 red, 25 amber, 25 white) behind a clear polycarbonate lens with internal reflectors to boost visibility. The low-profile ABS body and included hardware make the bars a straightforward upgrade for trailers, trucks, RVs, boats and other work vehicles that need durable, multi-purpose rear lighting.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable and weatherproof are these tail light bars?\u003c\/h3\u003e\n\n\u003cp\u003eThe housings are sonically sealed and screw-free to prevent water from entering the assembly, and the ABS shell resists corrosion and impact. The lights meet IP68 protection, meaning they are designed to be dust-tight and submersible for limited periods — suitable for trailer use where immersion is possible.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP68 rating: dust-tight and submersible protection\u003c\/li\u003e\n  \u003cli\u003eSonic-sealed lens and housing to block water ingress\u003c\/li\u003e\n  \u003cli\u003eRugged ABS construction for impact and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eReflectors inside the clear PC lens to increase visible output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat functions do these LEDs provide and how are they wired?\u003c\/h3\u003e\n\n\u003cp\u003eEach bar integrates brake (red), turn (amber), running (green-coded wire), and reverse (white) lighting using color-coded wires for straightforward hardwiring. The kit includes five wires per light and mounting bolts so you can attach the bar to any flat surface and connect it to a 10V–30V system.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e75 LEDs per bar: 25 red, 25 amber, 25 white for multi-function use\u003c\/li\u003e\n  \u003cli\u003eFive-color wiring: black ground, red brake, green tail\/running, yellow turn, white reverse\u003c\/li\u003e\n  \u003cli\u003eCompatible with 10V–30V DC systems common on trailers and trucks\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting bolts and clear instructions for surface installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check before submerging?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be simple: surface-mount the bar using the supplied bolts, then hardwire the five color-coded leads to the corresponding vehicle circuits. Before exposure to water, verify all connections are correct and sealed to avoid short circuits; using dielectric grease or heat-shrink tubing improves long-term reliability.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSurface-mounted with included hardware for quick fitting on flat panels\u003c\/li\u003e\n  \u003cli\u003eHardwire connection requires matching color codes to vehicle circuits\u003c\/li\u003e\n  \u003cli\u003eConfirm 10V–30V supply and correct grounding before operation\u003c\/li\u003e\n  \u003cli\u003eSeal wire joints for underwater or boat-trailer installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights fit my vehicle and how visible are they at night?\u003c\/h3\u003e\n\n\u003cp\u003eThe universal design suits most trailers, trucks, RVs, UTVs, and boats that accept surface-mounted lamps and run on 10V–30V DC. Internal reflectors paired with the clear polycarbonate lens enhance light dispersion, improving recognition by other drivers at night and in poor weather conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUniversal fit for most towing vehicles, vans, campers, and boats\u003c\/li\u003e\n  \u003cli\u003eClear PC lens with internal reflectors for wider light spread\u003c\/li\u003e\n  \u003cli\u003eMultiple LED colors provide distinct signals for safety compliance\u003c\/li\u003e\n  \u003cli\u003eLow profile design minimizes snagging while maintaining visibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These Partswcgg 75-LED tail light bars suit vehicle owners who need rugged, multi-function rear lighting that can withstand wet environments — ideal for boat trailers, flatbeds, campers, commercial trucks and anyone seeking brighter, compact LED signaling. They are a practical choice for DIY installers and fleet managers who want a weatherproof, easy-to-wire solution without complex modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What voltage systems do these tail lights support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They work with 10V–30V DC systems, compatible with most trailers, trucks, RVs and boats.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights safe for boat trailer submersion?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the IP68-rated, sonic-sealed housing is designed to resist temporary submersion when properly installed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587580756153,"sku":"B0GJS3JF76","price":110.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-tail-light-bar.jpg?v=1790513736"},{"product_id":"partswcgg-2-piece-square-led-rear-combination-tail-lights-w-side-markers-universal-12v-bolt-in-high-visibility","title":"Partswcgg 2-Piece Square LED Rear Combination Tail Lights w\/ Side Markers — Universal 12V Bolt-In, High-Visibility","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg's 2-piece square LED rear combination tail light set is a bolt-in replacement assembly with brake, turn, tail, reverse and side-marker LEDs designed for 12V trucks, trailers and other heavy-duty vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese aftermarket assemblies replace dull incandescent lamps with high-visibility LED clusters: a 16-LED module for brake\/parking\/turn signals, six LEDs for the license area, 21 white LEDs for reverse, and three side-marker LEDs per unit. The housings are larger than many factory lights and require basic modification and hardwiring; they are sold as a set and include mounting hardware but do not plug directly into every stock connector.\u003c\/p\u003e\n\n\u003ch3\u003eWill these tail lights fit my vehicle without modification?\u003c\/h3\u003e\n\u003cp\u003eThey are a universal 12V bolt-in style intended for a wide range of trucks, trailers, flatbeds and similar vehicles, but not a direct factory replacement for some models such as Wrangler YJ\/CJ. Because the assemblies are slightly larger than many stock units, mounting holes and wiring pigtails may need trimming or redrilling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApproximate bolt spacing: about 2 inches; confirm measurements before cutting.\u003c\/li\u003e\n  \u003cli\u003eMay require redrilling or re-locating mounting holes for a clean fit.\u003c\/li\u003e\n  \u003cli\u003eCutting and splicing the stock lamp pigtail is typically necessary.\u003c\/li\u003e\n  \u003cli\u003eNot plug-and-play for Wrangler tail housings without modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I wire these LED combination tail lights?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses four conductors per lamp: ground, reverse, tail\/license\/side marker, and stop\/turn. Wire colors on this aftermarket assembly may not match every vehicle, so verify function with a meter or test lamp before final connections. If your vehicle’s system uses incandescent bulbs, added resistors might be needed to prevent hyper-flash.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWhite = chassis ground.\u003c\/li\u003e\n  \u003cli\u003eBlue = reverse\/backup light circuit.\u003c\/li\u003e\n  \u003cli\u003eBlack = tail, license plate and side marker circuit.\u003c\/li\u003e\n  \u003cli\u003eRed = stop and turn circuit.\u003c\/li\u003e\n  \u003cli\u003eResistors are not included; use them if hyper-flash occurs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat lighting performance and features do these assemblies provide?\u003c\/h3\u003e\n\u003cp\u003eEach square unit delivers bright, long-lived LEDs across multiple functions—brake, turn, parking, reverse and side-marker—improving visibility compared with older incandescent lamps. The removable lens simplifies access for maintenance or bulb\/LED replacement when required, and the included hardware covers standard bolt-in installation once modifications are made.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16 red LEDs for brake\/parking\/turn functions for high visibility.\u003c\/li\u003e\n  \u003cli\u003e6 LEDs illuminating the license plate area.\u003c\/li\u003e\n  \u003cli\u003e21 bright white LEDs dedicated to reverse lighting.\u003c\/li\u003e\n  \u003cli\u003e3 side-marker LEDs per assembly for improved lateral visibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and post-purchase support?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically involves trimming the old wiring harness, splicing the vehicle’s wires to the new pigtail, and securing the assembly with bolts—some drilling may be necessary for proper alignment. Partswcgg offers customer support and asks buyers to contact them with issues; they respond to inquiries and can help troubleshoot fitment or wiring questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCutting of stock tail lamp pigtail and splicing required.\u003c\/li\u003e\n  \u003cli\u003eBolt-in hardware included; pre-drilled holes may need adjustment.\u003c\/li\u003e\n  \u003cli\u003eProduct is sold as a pair (left and right assemblies) for rear installation.\u003c\/li\u003e\n  \u003cli\u003eCustomer service available for fitment or wiring help.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: These Partswcgg square LED rear combination tail lights suit owners and operators who want a brighter, multi-function aftermarket lighting solution for 12V trucks, trailers, flatbeds and other utility vehicles and who are comfortable with light body modification and basic electrical splicing. If you need a true plug-and-play factory replacement for certain Jeep Wrangler models or prefer no-drill installs, consider verifying fitment or choosing a model marketed specifically as a direct OEM swap.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are resistors required for these LED tail lights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Possibly—if your vehicle’s flasher hyper-flashes with LEDs, install resistors; they are not included with the lights.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fit Jeep Wrangler YJ or CJ without modification?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—these are larger than stock Wrangler YJ\/CJ lights and typically require modification or redrilling to fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587584721081,"sku":"B09TN679KQ","price":100.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-assembly-square-tail-light.jpg?v=1790513958"},{"product_id":"partswcgg-4-in-round-led-trailer-tail-lights-red-4-pack-24-led-sealed-ip65-flush-mount","title":"Partswcgg 4 in Round LED Trailer Tail Lights - Red 4-Pack, 24-LED Sealed IP65 Flush-Mount","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 4-inch round LED trailer tail lights are a 4-piece, sealed 12V lighting kit that provides stop, turn, tail, and marker functions with 24 bright LEDs per lamp and included grommets and 3-prong pigtails for flush mounting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Partswcgg lights are designed to replace older incandescent trailer lamps with a low-current, high-visibility LED alternative. Each unit houses 24 LEDs in a compact 4-inch round housing rated IP65 for water resistance, and the set includes rubber grommets and 3-prong wire pigtails to simplify installation on trucks, RVs, trailers, and other 8–16V DC vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights install on a trailer or truck?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: the lights are flush-mount with a rubber grommet and accept a standard 3-prong plug. The kit includes pigtails so you can test wiring before final mounting, and the wiring color code is provided for correct connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrill a mounting hole of about 4.6 inches to fit the 5.3-inch grommet ring and 4\" inner diameter.\u003c\/li\u003e\n  \u003cli\u003eWire colors: white = ground, red = high-brightness (stop\/turn), black = low-brightness (tail\/marker).\u003c\/li\u003e\n  \u003cli\u003eFlush-mount with included grommets for a secure, vibration-resistant fit.\u003c\/li\u003e\n  \u003cli\u003eSealed design prevents moisture ingress in wet road conditions (IP65 rated).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these LED lamps work with my vehicle’s electrical system?\u003c\/h3\u003e\n\u003cp\u003eYes — the Partswcgg lights accept 12V DC input and are suitable for most 8–16V DC vehicle systems commonly used on trailers, trucks, RVs, and utility vehicles. They draw less current than incandescent bulbs, reducing strain on wiring and power sources.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 8–16V DC systems; ideal for 12V setups.\u003c\/li\u003e\n  \u003cli\u003e24 LEDs per lamp deliver brighter output while using lower amperage than bulbs.\u003c\/li\u003e\n  \u003cli\u003e3-prong connectors match standard trailer wiring harnesses for compatibility.\u003c\/li\u003e\n  \u003cli\u003eIP65 sealing protects against rain, road spray, and dust (not for submersion).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow bright and durable are these LED tail lights?\u003c\/h3\u003e\n\u003cp\u003eEach lamp uses 24 LED chips to produce a vivid red signal that’s easier to see than many incandescent bulbs, especially in daylight. The sealed housing and rubber grommet mounting help protect the lamp from vibration and moisture, extending service life in demanding road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24 high-efficiency LED chips per light for strong, consistent output.\u003c\/li\u003e\n  \u003cli\u003eIP65-rated housing resists water and dust exposure (avoid underwater use).\u003c\/li\u003e\n  \u003cli\u003eFlush-mount design reduces protrusion and susceptibility to impact.\u003c\/li\u003e\n  \u003cli\u003eLower current draw means cooler operation and longer lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat else is included and what should I prepare before fitting?\u003c\/h3\u003e\n\u003cp\u003eThe package contains four round red tail lights, four rubber grommets sized to the provided ring dimensions, and four 3-prong wire pigtails for each lamp. Prepare basic hand tools, a drill for the correct hole size, and a tester or temporary connection to confirm wiring before final installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKit includes 4 lights, 4 rubber grommets, and 4 three-prong pigtails.\u003c\/li\u003e\n  \u003cli\u003eRecommended drill hole: ~4.6 inches to accept the grommet ring.\u003c\/li\u003e\n  \u003cli\u003eUse a multimeter or test light to verify wiring before mounting.\u003c\/li\u003e\n  \u003cli\u003eContact Partswcgg support if you encounter fitment or wiring questions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 4-pack is aimed at DIY trailer owners, fleet managers, and vehicle hobbyists who want a compact, durable LED upgrade for stop, turn, tail, and marker lighting. It’s a practical choice for semi trailers, enclosed trailers, pickup trucks, RVs, utility vehicles, horse trailers, parade floats, and other 8–16V applications where reliable, low-current illumination and straightforward installation matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are IP65 rated for water and dust resistance but not meant for continuous underwater use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do they fit standard 3-prong trailer plugs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — each lamp includes a 3-prong pigtail compatible with standard trailer wiring harnesses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587708649657,"sku":"B09Z2L8GSD","price":75.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-4-inch-led-tail-light.jpg?v=1790515033"},{"product_id":"partswcgg-4-inch-round-led-trailer-light-kit-2-red-stop-turn-tail-2-white-reverse-24-led-ip65","title":"Partswcgg 4-inch Round LED Trailer Light Kit — 2 Red Stop\/Turn\/Tail + 2 White Reverse, 24-LED IP65","description":"\u003cstrong\u003ePartswcgg 4-inch round LED trailer light kit includes two red multi-function stop\/turn\/tail lamps and two white reverse lamps with grommets and 3-prong pigtails for a complete 12V installation.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact set is built for trucks, RVs and trailers that need brighter, lower-current lighting than incandescent bulbs. Each lamp contains 24 LEDs and is rated IP65 for water resistance (not submersion). The kit ships with rubber grommets and standard 3-prong plugs so you can mount flush and wire quickly for stop, turn, tail and backup functions.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright and energy-efficient are these 4\" LED lights?\u003c\/h3\u003e\n\u003cp\u003eEach round light uses 24 LED chips to deliver a noticeably brighter beam while drawing less current than comparable incandescent lamps. The LEDs provide clear stop\/turn\/tail and reverse illumination that improves visibility without taxing the vehicle electrical system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e24 LED chips per lamp for higher lumen output\u003c\/li\u003e\n  \u003cli\u003eLower current draw than incandescent equivalents\u003c\/li\u003e\n  \u003cli\u003e12V DC input suitable for most trucks, trailers and RV electrical systems\u003c\/li\u003e\n  \u003cli\u003eRed units: stop\/turn\/tail; white units: reverse\/backup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the mounting and wiring requirements?\u003c\/h3\u003e\n\u003cp\u003eThese lights are designed for flush-mount installation using the included rubber grommets and standard 3-prong wire pigtails. The wiring convention simplifies hookup: white = ground, red = high brightness (stop\/turn), black = low brightness (tail), and the plugs match common trailer connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrill an approx. 4.6\" hole; grommet inner diameter is 4\" with 5.3\" outer ring\u003c\/li\u003e\n  \u003cli\u003eFlush-mount with included rubber grommets for a finished look\u003c\/li\u003e\n  \u003cli\u003eStandard 3-prong wire pigtails included for quick connection\u003c\/li\u003e\n  \u003cli\u003eWiring color guide: white ground, red high, black low\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lights weatherproof and durable enough for road use?\u003c\/h3\u003e\n\u003cp\u003eThe housings are rated IP65, which protects against dust and low-pressure water jets—suitable for typical road, rain and washdown conditions. They are not intended for continuous submersion, so avoid mounting them where they will sit underwater.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65 rated: dust-tight and water-resistant to jets\u003c\/li\u003e\n  \u003cli\u003eRubber grommets help seal the mounting point\u003c\/li\u003e\n  \u003cli\u003eDurable LED design resists vibration better than bulbs\u003c\/li\u003e\n  \u003cli\u003eAvoid underwater use; not a submersible fixture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: installers, fleet owners and DIY trailer owners who need a compact, brighter 4\" lighting solution that replaces incandescent tail and backup lamps. It's ideal for semi trailers, utility trailers, RVs, pickup trucks, horse trailers, parade floats, UTVs and many 8–16V DC vehicles. The package suits anyone seeking straightforward flush-mount installation, standard 3-prong compatibility and an IP65-rated light that consumes less power while improving visibility. Partswcgg includes a 1-year warranty and responsive customer support to assist with fitment or performance questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lights work on both 12V and 24V systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed for 12V DC systems; consult Partswcgg support before using on 24V systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is hardware included to mount the lights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—each light includes a rubber grommet and 3-prong wire pigtail for flush mounting and wiring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67587916333241,"sku":"B09Z25C41D","price":79.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-red-and-white-lights.jpg?v=1790515788"},{"product_id":"partswcgg-led-trailer-marker-lights-14pc-4-rectangular-set-amber-red-reflex-lenses-surface-mount","title":"Partswcgg LED Trailer Marker Lights 14Pc 4\" Rectangular Set — Amber \u0026 Red, Reflex Lenses, Surface-Mount","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 14-piece set of 4\" rectangular LED trailer marker lights provides bright, replaceable-reflex lens clearance and side marker illumination for trailers, RVs, and trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese compact 4 x 2 x 1 inch LED marker lights combine amber and red lenses, built-in reflex reflectors, and surface-mount hardware to modernize exterior lighting on campers, motorhomes, utility trailers, pickups and commercial rigs. The set includes seven amber and seven red fixtures, each hardwired with two color-coded leads for straightforward installation and maintenance-free LED operation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these LEDs differ from older incandescent side marker lights?\u003c\/h3\u003e\n\u003cp\u003eLEDs use multiple LED chips to emit cleaner, more consistent light with lower current draw and longer expected life than incandescent bulbs. Partswcgg fixtures include six LED chips per lamp and snap-on reflex lenses so you get increased visibility without frequent replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix LED chips per lamp for brighter, more even illumination\u003c\/li\u003e\n  \u003cli\u003eLower power consumption than incandescent bulbs\u003c\/li\u003e\n  \u003cli\u003eSnap-on, replaceable lens with integrated reflex reflector\u003c\/li\u003e\n  \u003cli\u003eDurable hardwired connection for reliable operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the dimensions and mounting options?\u003c\/h3\u003e\n\u003cp\u003eEach light measures approximately 100mm x 50mm x 25mm (4\" x 2\" x 1\") and fits standard 3\" mounting centers. The housing is made for surface mounting and ships with stainless steel screws, making it suitable for wood, metal or composite mounting surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall size: 4\" L x 2\" W x 1\" H — compact for tight mounting locations\u003c\/li\u003e\n  \u003cli\u003eMounting centers compatible with many trailer patterns (about 3\")\u003c\/li\u003e\n  \u003cli\u003eIncludes stainless steel screws for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eWires exit from the front side of the base for neater routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are they wired and what should I know before installation?\u003c\/h3\u003e\n\u003cp\u003eEach LED marker has two wires: white for ground and black for positive power. Installers should confirm vehicle wiring polarity and use appropriate connectors or sealant to protect splices from moisture and corrosion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHardwired with two leads: white = ground, black = positive\u003c\/li\u003e\n  \u003cli\u003eWire exits from front side of base for flexible routing and tidy mounts\u003c\/li\u003e\n  \u003cli\u003eUse waterproof connectors and dielectric grease on exposed splices\u003c\/li\u003e\n  \u003cli\u003ePolarity check recommended before final mounting to avoid damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these marker lights work on my RV, trailer or truck?\u003c\/h3\u003e\n\u003cp\u003eThese rectangular LED markers are designed as universal replacements for many RVs, campers, trailers, trucks and tractors. The mix of amber and red lenses meets common side-marker and clearance placement needs across a wide range of vehicle types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal fit for RVs, motorhomes, campers, trailers, pickups and commercial vehicles\u003c\/li\u003e\n  \u003cli\u003eAmber units for front\/side; red units for rear\/side clearance applications\u003c\/li\u003e\n  \u003cli\u003eReplaceable lenses let you refresh reflectivity without replacing the entire lamp\u003c\/li\u003e\n  \u003cli\u003eSuitable as upgrades from incandescent side marker lights\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 14-piece Partswcgg kit is ideal for vehicle owners and fleet managers who want a cost-effective, low-maintenance update to exterior side marker and clearance lighting. It suits DIY installers and professional shops replacing faded reflectors or upgrading to LEDs across multiple mounting points on trailers, campers, RVs, pickups and commercial equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are replacement lenses included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each light features a snap-on, replaceable reflex lens; extra separate lenses are not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which wire is ground?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: White is the ground lead and black is the positive power lead for each lamp.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67588938399929,"sku":"B0BQJ1ZWCC","price":79.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-packaging-rectangular-led-marker-lights.jpg?v=1790528316"},{"product_id":"partswcgg-led-trailer-tail-lights-4-pack-red-5x3-rectangular-12-led-ip67-waterproof","title":"Partswcgg LED Trailer Tail Lights 4-Pack Red — 5x3 Rectangular, 12-LED, IP67 Waterproof","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 4-piece 5x3 rectangular LED trailer tail light set delivers bright, multi-function red lighting for stop, turn, brake and running lights in a weatherproof, easy-to-install package.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese compact 12‑LED rectangular tail lights are built for 12V vehicles and trailers that need reliable rear illumination. Each lamp integrates stop, turn and tail functions into a single sealed unit with three-wire pigtails and a rubber grommet for a tidy, non-hardwired installation. The low-profile housing and clear mounting dimensions make them a practical upgrade or replacement for flatbeds, trailers, trucks, RVs and other utility vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights perform in wet or dusty conditions?\u003c\/h3\u003e\n\u003cp\u003eThe lenses and housing are silicon-sealed to protect internal circuitry and LEDs from moisture and road debris. An IP67 rating means temporary submersion and heavy rain won’t compromise performance, so visibility remains consistent in varied weather.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone-sealed construction prevents water ingress.\u003c\/li\u003e\n  \u003cli\u003eIP67-rated for dust resistance and temporary immersion.\u003c\/li\u003e\n  \u003cli\u003eDurable LEDs resist vibration and road shock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wiring do I need for installation?\u003c\/h3\u003e\n\u003cp\u003eEach light uses a three-conductor pigtail for a straightforward hookup: separate wires for ground, high\/stop\/turn, and low\/tail. Because the set includes grommets and pigtails, you can plug into an existing harness or splice into your vehicle’s wiring without direct hardwiring the lamp body.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWhite = ground for safe grounding to chassis.\u003c\/li\u003e\n  \u003cli\u003eRed = high mode (stop\/brake\/turn functions).\u003c\/li\u003e\n  \u003cli\u003eBlack = low mode (tail\/running light function).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights fit my trailer or truck easily?\u003c\/h3\u003e\n\u003cp\u003eThese LEDs are marketed as 3x5 style but the actual lamp face and overall dimensions are provided so you can confirm fitment before drilling. The included grommet helps align the lamp and reduces the need for complex brackets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLight-only size: approximately 5.14\" x 3.27\" x 1.00\".\u003c\/li\u003e\n  \u003cli\u003eOverall size with flange: about 6.25\" x 4.26\" x 1.00\".\u003c\/li\u003e\n  \u003cli\u003eInstallation may require a ~5-5\/8\" mounting hole—check before cutting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow bright and visible are the LEDs on roads at night?\u003c\/h3\u003e\n\u003cp\u003eEach rectangular lamp contains 12 high-output LEDs arranged to provide clear signaling and improved visibility at typical driving distances. The focused LED pattern enhances recognition of braking and turning actions without being overly dispersed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12 LEDs per unit for concentrated rear illumination.\u003c\/li\u003e\n  \u003cli\u003eRed lens optimized for signaling and brake visibility.\u003c\/li\u003e\n  \u003cli\u003eEven light distribution reduces glare while improving noticeability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Partswcgg 4-piece LED tail light kit suits vehicle owners, fleet operators and trailer builders who need a cost-effective, rugged lighting solution. Choose this set if you want compact, sealed lights that are simple to wire, fit a broad range of 12V vehicles—trailers, trucks, horse trailers, dump trucks, UTVs—and maintain reliable signaling in harsh conditions. If you need a non-hardwired installation with clear wiring color codes and defined mounting dimensions, this kit offers a practical, weather-resistant choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The lights are silicone sealed and rated IP67, protecting against dust and temporary immersion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to hardwire the lamps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Each lamp comes with a 3-prong pigtail and rubber grommet for splicing into your existing wiring harness.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67588944625849,"sku":"B0B1C1MR83","price":82.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-assembled-set.jpg?v=1790528571"},{"product_id":"partswcgg-trailer-tail-light-bar-40-led-red-white-amber-with-iron-mesh-guard-5-wire-heavy-duty","title":"Partswcgg Trailer Tail Light Bar 40-LED Red\/White\/Amber with Iron Mesh Guard, 5-Wire Heavy-Duty","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 2Pcs Trailer Tail Light Bar is a heavy-duty 40-LED, red\/white\/amber multi-function light pair with iron mesh protection designed to deliver bright running, brake, turn and reverse illumination for trailers and work vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact description covers what the lights are, how they connect, and why they’re useful. The pair is built for universal 10V–30V vehicle systems and combines a durable PC lens with a protective iron mesh guard. Hardwired with five wires, the lights separate running, brake, turn and reverse circuits for clear, distinct signaling—helping you increase visibility when towing, working on a site, or driving in poor weather.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright and visible are these lights in varied conditions?\u003c\/h3\u003e\n\u003cp\u003eThe bar uses 40 high-power LEDs to provide strong, consistent illumination for running lights, brake lights, turn signals and reverse lights. Brightness is tuned for both daytime visibility and nighttime signaling without flicker, improving recognition at a distance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e40 advanced LED beads per bar for even light distribution\u003c\/li\u003e\n  \u003cli\u003eRed for stop\/running, amber for turn, white for backup\u003c\/li\u003e\n  \u003cli\u003eDesigned to remain visible in rain, fog and low-light situations\u003c\/li\u003e\n  \u003cli\u003eStable output optimized for 10V–30V vehicle electrical systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the construction durable and serviceable?\u003c\/h3\u003e\n\u003cp\u003eThe lens is molded from polycarbonate (PC), which resists cracking and yellowing better than ordinary plastics. In front of the lens a welded iron mesh shield protects the LED strip from impacts and debris while allowing light to pass through.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust PC lens for long-term clarity and impact resistance\u003c\/li\u003e\n  \u003cli\u003eIron mesh guard protects LEDs against stones and knocks\u003c\/li\u003e\n  \u003cli\u003eMetal housing and sealed electronics for outdoor use\u003c\/li\u003e\n  \u003cli\u003eReplaceable wiring approach to aid field repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I wire and install the 5-wire tail light bar?\u003c\/h3\u003e\n\u003cp\u003eThe unit is hardwired with five color-coded conductors: black = ground, red = brake light, green = tail\/running light, white = backup\/reverse light and yellow = turn signal. Installation typically requires two mounting holes and suitable vehicle-side connections; it is not compatible with vehicles that use a single circuit for brake and turn signals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFive-wire hookup separates each function for clear signals\u003c\/li\u003e\n  \u003cli\u003eSimple color codes match common trailer wiring conventions\u003c\/li\u003e\n  \u003cli\u003eMay require drilling two mounting holes for secure fit\u003c\/li\u003e\n  \u003cli\u003eNot for use with combined brake\/signal single-circuit systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect from support and compatibility?\u003c\/h3\u003e\n\u003cp\u003eThese lights are intended as universal fit for most trailers, RVs, UTVs, trucks, boats and agricultural equipment that accept 10–30V inputs. The manufacturer offers customer support for installation questions and will respond to queries within 24 hours.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal 10V–30V compatibility for many vehicle types\u003c\/li\u003e\n  \u003cli\u003eWorks with trailers, campers, pickup beds, caravans, tractors\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for wiring or fitment questions\u003c\/li\u003e\n  \u003cli\u003eClear wiring schematic printed in product details\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: If you tow frequently, run a work vehicle, or need a durable replacement tail light set with separate brake, turn and reverse outputs, this Partswcgg 2-piece LED bar is built for rugged use. It suits fleet owners, contractors, farmers and recreational vehicle owners who require dependable visibility and impact protection for their exterior lighting. Choose this kit when you want distinct, hardwired signaling, a tough PC lens, and an iron mesh guard for extra protection on the road or jobsite.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these lights work on a 12V trailer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Partswcgg lights accept 10V–30V input, so they are compatible with standard 12V trailer electrical systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these if my vehicle has combined brake and turn circuits?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These lights require separate circuits for brake and turn signals and won’t work with single-circuit combined systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67589777162425,"sku":"B0GHJP4CV9","price":92.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-trailer-tail-light-bar-front-view.jpg?v=1790531628"},{"product_id":"partswcgg-4-double-face-led-trailer-lights-2-pack-48-led-10-30v-pivot-post-mount","title":"Partswcgg 4\" Double-Face LED Trailer Lights — 2-Pack 48-LED 10–30V, Pivot Post Mount","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 4\" double-face LED trailer lights are a pair of 48-LED, post-mount signal lamps that deliver front amber and rear red illumination with multi-angle mounting for trucks and trailers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two 4-inch pedestal lights combine bright amber and red LEDs into a compact dual-face assembly engineered for stop, turn, tail and parking functions. Built to accept 10–30V systems, each unit houses 48 LEDs (24 amber, 24 red) inside a chrome-plastic bezel and offers a pivoting mounting post so you can orient the lamp for forward, rearward or side signaling. The simple three-wire hookup and universal fit make these lights practical additions for commercial trucks, trailers, farm equipment and other heavy-duty vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lights provide both front and rear signaling?\u003c\/h3\u003e\n\u003cp\u003eEach lamp has two distinct lenses — an amber lens facing forward and a red lens facing backward — so one housing performs multiple functions. The LEDs are wired to allow high- and low-brightness modes, giving you visible signals whether used as turn, brake, tail, or parking lights.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront-facing amber lens for turn and directional signaling\u003c\/li\u003e\n  \u003cli\u003eRear-facing red lens for brake and tail illumination\u003c\/li\u003e\n  \u003cli\u003e3-wire system: black = ground, red = high brightness, white = low brightness\u003c\/li\u003e\n  \u003cli\u003e48 total LEDs: 24 amber + 24 red for strong visibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights fit my vehicle and electrical system?\u003c\/h3\u003e\n\u003cp\u003eThe lights are designed as universal pedestal-mounted units compatible with most 10–30V vehicle electrical systems. Their post-mount base and multi-angle pivot let you position the lamp for fender, bumper or side mounting, making them suitable for trailers, trucks, and agricultural machines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWide operating voltage range: 10V–30V\u003c\/li\u003e\n  \u003cli\u003ePost mount with multi-directional pivot (90° or 180° orientation)\u003c\/li\u003e\n  \u003cli\u003eCompact 4\" diameter for tight mounting spaces\u003c\/li\u003e\n  \u003cli\u003eWorks with heavy trucks, trailers, farm equipment and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I wire and control high\/low brightness modes?\u003c\/h3\u003e\n\u003cp\u003eWiring follows a straightforward three-conductor layout: ground, high-brightness feed, and low-brightness feed. Use the red lead for the brighter mode (both faces illuminate brighter) and the white lead for low\/marker illumination; black attaches to chassis ground.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack lead: chassis ground\u003c\/li\u003e\n  \u003cli\u003eRed lead: high-brightness output (both faces activate)\u003c\/li\u003e\n  \u003cli\u003eWhite lead: low-brightness\/marker output (both faces activate)\u003c\/li\u003e\n  \u003cli\u003eLeads exit through the mounting post for protected wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and support can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe lamp shell uses chrome-finish plastic and an LED array that minimizes maintenance compared with incandescent bulbs. Partswcgg backs the lights with a one-year warranty and commit to customer support with a 24-hour response window for pre- and post-sale inquiries.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome plastic housing for corrosion-resistant appearance\u003c\/li\u003e\n  \u003cli\u003eLEDs reduce bulb replacements and power draw\u003c\/li\u003e\n  \u003cli\u003e1-year limited warranty from date of order\u003c\/li\u003e\n  \u003cli\u003eCustomer service response within 24 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These dual-face 4\" LED pedestal lights suit vehicle owners and fleet managers who need versatile, compact signaling on trailers, heavy trucks, agricultural implements and utility equipment. If you want an easy-to-wire, multi-function lamp with adjustable mounting angles and wide voltage compatibility, this Partswcgg two-piece set is designed to meet those needs without complex installation or frequent maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lights fit standard 4-inch mounting holes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the lamps are 4-inch diameter post-mount units designed for common pedestal mounting on trailers and trucks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I run these on a 12V truck electrical system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they operate across a 10–30V range, so a standard 12V vehicle system is fully compatible.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67589777260729,"sku":"B0CFLHPKT5","price":77.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-double-face-front-and-back.jpg?v=1790531629"},{"product_id":"partswcgg-6-oval-led-trailer-tail-light-kit-2-pack-red-82-7-4-pin-harness-weatherproof","title":"Partswcgg 6\" Oval LED Trailer Tail Light Kit — 2-Pack Red, 82.7\" 4-Pin Harness, Weatherproof","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg's 6\" oval LED trailer tail light kit provides a weatherproof, bright brake\/turn\/tail lighting solution designed for hitch-mounted cargo carriers and trailers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit bundles two 6\" oval red LED tail lights, heavy-duty L-shaped mounting brackets and an 82.68\" 4-pin wiring harness to replace or upgrade the rear lighting on cargo carrier racks and trailers. The LEDs use low-current, high-output chips and ultrasonic-sealed housings rated to resist water and road grime, while the steel brackets and hardware fasten the lamps securely to most hitch carriers. The harness includes dual three-prong plugs for the lamps and a standard 4-way flat plug that connects to a 12V vehicle socket.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright and durable are these 6\" oval LED lights?\u003c\/h3\u003e\n\u003cp\u003eEach oval lamp contains 10 LED chips that produce a clear, bright red output while drawing less current than incandescent bulbs. The housings are assembled with ultrasonic sealing for improved water resistance and longevity outdoors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 high-efficiency LED chips per lamp for strong visibility\u003c\/li\u003e\n  \u003cli\u003eLow current draw extends vehicle circuit life\u003c\/li\u003e\n  \u003cli\u003eUltrasonic-sealed housing delivers IP67-level protection against water and dust\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat mounting hardware and fitment does the kit include?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with two L-shaped mounting brackets sized to fit common cargo carrier frames and includes locking nuts and heavy-duty hardware. Brackets are powder-coated steel to resist rust, and their openings accommodate a variety of carrier tubing profiles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBracket outer dimensions: approx. 8.3\" wide x 4.0\" tall\u003c\/li\u003e\n  \u003cli\u003eBracket opening: approx. 6.7\" wide x 2.4\" tall to fit standard carrier rails\u003c\/li\u003e\n  \u003cli\u003e3mm powder-coated steel and locking nuts for a secure, rust-resistant mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the wiring harness connect to my vehicle and lights?\u003c\/h3\u003e\n\u003cp\u003eThe included 82.68\" harness runs from the lights to a 4-way flat connector that mates with most 12V vehicle trailer sockets. Each lamp uses a three-prong plug that snaps into the harness for quick, tool-free installation and easy serviceability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e82.68\" (approximately 7 feet) total harness length for flexible routing\u003c\/li\u003e\n  \u003cli\u003eTwo three-prong plugs on the lamp end for secure lamp connection\u003c\/li\u003e\n  \u003cli\u003eStandard 4-way flat plug to connect to vehicle trailer output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and cargo carriers are compatible with this kit?\u003c\/h3\u003e\n\u003cp\u003eThis universal 12V DC, 4-wire tail light kit is suitable for most cars, trucks and SUVs equipped with a standard 4-way flat trailer connector and works well on popular hitch-mounted cargo carriers. It pairs with many carrier models and part numbers listed by carriers and retailers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with standard 4-wire, 12V vehicle trailer systems\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit many cargo carrier models and common rack tubing sizes\u003c\/li\u003e\n  \u003cli\u003eReference compatibility with carrier item numbers such as 63152, 63153, 63154 and others\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Partswcgg 6\" Oval LED tail light kit is ideal for owners of hitch-mounted cargo carriers, small trailer users, and anyone replacing worn incandescent carrier lights with a brighter, weather-resistant LED solution. It's aimed at DIY installers who want a complete set—lights, brackets and harness—ready to mount and wire to a standard 4-way vehicle connector. If you need brighter rear signaling that resists the elements and mounts firmly to a carrier frame, this kit delivers the core components for a straightforward upgrade.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit plug into my vehicle's 4-way trailer socket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a standard 4-way flat plug designed to connect with common 12V vehicle trailer sockets.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the lights waterproof for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The lamps use ultrasonic sealing and an IP67-like design to resist water and dust for outdoor mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67589792432313,"sku":"B0G6Y547F9","price":92.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-6-inch-oval-led-tail-light_e443da10-b70a-420c-9f91-a5c2837464ba.jpg?v=1790531972"},{"product_id":"partswcgg-6-oval-led-trailer-tail-lights-4-pack-10-led-ip67-waterproof-multi-function-kit","title":"Partswcgg 6\" Oval LED Trailer Tail Lights 4-Pack — 10-LED, IP67 Waterproof Multi-Function Kit","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 4-piece 6\" oval LED trailer tail light set provides bright, multi-function rear lighting for trailers and utility vehicles with durable IP67 protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade your trailer’s rear lighting with this complete kit from Partswcgg. Each oval lamp houses 10 high-efficiency LEDs and combines brake, tail, and turn signal functions into a single flush-mount unit. The set includes rubber grommets and three-prong wire plugs for easier installation, and is built to withstand road vibration and wet conditions commonly encountered on trailers, trucks, and utility vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eWhat functions do these oval LED tail lights perform?\u003c\/h3\u003e\n\u003cp\u003eEach lamp integrates multiple lighting roles so you can replace separate bulbs with one robust unit. The LEDs handle stop (brake), turn signal, and steady tail\/marker duties, reducing wiring complexity and maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrake\/stop, turn signal, and tail light combined in each oval unit\u003c\/li\u003e\n  \u003cli\u003e10 LEDs per lamp for brighter output and lower power draw\u003c\/li\u003e\n  \u003cli\u003eWorks on typical 8–16V DC trailer electrical systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the Partswcgg 6\" oval lights on my trailer?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward for anyone familiar with trailer wiring. The lights are flush-mount and come with rubber grommets and standard 3-prong plugs to match common harnesses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWire colors: white = ground, red = high (brake\/turn), black = low (tail)\u003c\/li\u003e\n  \u003cli\u003eDrill a 6.6\" hole for the provided 7.5\" grommet ring and 6.3\" inner diameter lamp\u003c\/li\u003e\n  \u003cli\u003eFlush-mount the lamp with the rubber grommet for a sealed fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these tail lights weatherproof and road-ready?\u003c\/h3\u003e\n\u003cp\u003eThe lenses and housing are engineered to resist road moisture and splashes, making them suitable for exterior use on trailers and similar vehicles. They are rated IP67, offering strong protection against dust and immersion-level moisture exposure when mounted and sealed properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP67-rated housing for protection against dust and water immersion\u003c\/li\u003e\n  \u003cli\u003eDurable lens and shock-resistant LED chips for vibration-prone environments\u003c\/li\u003e\n  \u003cli\u003eNot intended for continuous underwater use—install above waterline\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit best for?\u003c\/p\u003e\n\u003cp\u003eThis Partswcgg 4-pack is made for trailer owners, fleet managers, and DIY mechanics who want a straightforward, durable lighting upgrade. It suits semi trailers, utility trailers, pickup conversions, horse and boat trailers, service vans, and many 8–16V vehicles that need combined stop\/turn\/tail functionality with low maintenance and strong weather resistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these work on my 12V trailer wiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The lights accept 8–16V DC input and are compatible with standard 12V trailer systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the lights come with mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each lamp includes a rubber grommet and standard 3-prong wire plug for flush mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67589795020985,"sku":"B0BQJ49TG9","price":77.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-oval-tail-light-front-view.jpg?v=1790532022"},{"product_id":"partswcgg-4-thin-line-amber-led-trailer-clearance-marker-lights-4-pack-waterproof-low-draw","title":"Partswcgg 4\" Thin-Line Amber LED Trailer Clearance Marker Lights — 4-Pack, Waterproof, Low-Draw","description":"\u003cp\u003e\u003cstrong\u003eThese are Partswcgg 4\" thin-line amber LED trailer clearance and side marker lights sold as a 4-piece sealed kit for quick, durable installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your trailer visible and compliant with a slim, waterproof LED marker that fits most 12V DC systems. Each 4\" x 1\" rectangular light houses three bright LEDs in a one-piece sonically sealed lens and housing assembly. The set includes gray molded bases with pigtail wires and mounting screws for straightforward snap-in mounting on standard 3\" centers.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these LED markers improve trailer visibility?\u003c\/h3\u003e\n\u003cp\u003eThese thin-line markers use three concentrated LEDs in each unit to produce a clear amber signal that’s visible in daylight and low-light conditions. The sealed design protects the diodes and wiring from water and debris, so the output stays consistent over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTriple LED array for brighter, more consistent light\u003c\/li\u003e\n  \u003cli\u003eAmber lens color for standard clearance\/marker signaling\u003c\/li\u003e\n  \u003cli\u003eWaterproof sonic seal keeps out moisture and dust\u003c\/li\u003e\n  \u003cli\u003eLow current draw (0.06 amps at 12.8V) for efficient operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation fast and reliable?\u003c\/h3\u003e\n\u003cp\u003eEach light ships with a gray polycarbonate mounting bracket and two screws so you can snap the assembly into place and hardwire the supplied pigtail. The bracket’s 3\" center hole pattern and plug-in style simplify alignment and replacement without special tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded mounting bracket and screws for snap-in mounting\u003c\/li\u003e\n  \u003cli\u003eHardwired pigtail for direct connection to trailer wiring\u003c\/li\u003e\n  \u003cli\u003eStandard 3\" center mount spacing for common compatibility\u003c\/li\u003e\n  \u003cli\u003eGray base resists corrosion and holds the lens securely\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights fit my vehicle or trailer electrical system?\u003c\/h3\u003e\n\u003cp\u003eThey are designed as universal 10V–13.8V DC marker lights suitable for most trailers, RVs, and light trucks on 12V systems. The compact rectangular footprint and standardized mounting make them a drop-in option for many existing marker light locations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with typical 12V DC trailer electrical systems\u003c\/li\u003e\n  \u003cli\u003eStandard rectangular shape fits common marker cutouts\u003c\/li\u003e\n  \u003cli\u003eSingle-wire connection per unit simplifies wiring\u003c\/li\u003e\n  \u003cli\u003eLow amperage draw minimizes load on circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these lights for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe lens and housing are sonically sealed into a single unit to prevent water intrusion and environmental damage. The polycarbonate base and sealed LED assembly resist vibration, dust, and road spray for long-term external use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece sealed lens and housing prevents leaks\u003c\/li\u003e\n  \u003cli\u003ePolycarbonate bracket resists impact and UV exposure\u003c\/li\u003e\n  \u003cli\u003eDesigned for vibration-prone trailer environments\u003c\/li\u003e\n  \u003cli\u003eLEDs maintain brightness longer than incandescent bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 4-pack suits trailer owners, RV enthusiasts, fleet operators, and anyone needing low-profile amber side marker or clearance lights. It’s ideal when you want a compact, energy-efficient replacement or upgrade that installs quickly, fits standard mounting patterns, and stands up to outdoor conditions. If you need help selecting or installing these lights, Partswcgg customer support is available to assist within 24 hours.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The lens and housing are sonically sealed to resist water and dust for outdoor use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What voltage do these marker lights use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are designed for 10V–13.8V DC systems, making them compatible with standard 12V trailer wiring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67590583812281,"sku":"B0GJS18WZS","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-amber-4-inch-marker.jpg?v=1790535136"},{"product_id":"partswcgg-4-smoked-amber-led-grille-marker-lights-kit-4pc-9-smd-low-profile-waterproof","title":"Partswcgg 4\" Smoked Amber LED Grille Marker Lights Kit - 4pc 9-SMD, Low-Profile Waterproof","description":"\u003cp\u003e\u003cstrong\u003ePartswcgg 4\" Smoked Amber LED Front Grille Marker Lights Kit is a 4-piece set of smoked-lens, 9-SMD amber LED markers designed to retrofit into flat surfaces on trucks, trailers, RVs and more for added visibility and a custom look.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese 4-inch amber marker lights come as a complete 4-piece kit with smoke-black lenses, nine bright SMD LEDs per unit, mounting screws and rubber gaskets. The universal, low-profile housings can be surface-mounted on grills, bumpers, hoods or trailer rails and are commonly wired to DRLs, headlight circuits or auxiliary switches. Because the lights are not vehicle-specific, simple drilling, double-sided tape or zip ties may be used during installation depending on your application.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these 9-LED smoked amber grille markers?\u003c\/h3\u003e\n\u003cp\u003eEach lamp uses nine SMD LEDs arranged for a concentrated amber output that is visible in daylight and at night. The smoked lens tones down glare for a factory-like appearance while still allowing strong amber illumination for marker or running-light functions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e9 SMD LEDs per 4\" unit for strong amber output\u003c\/li\u003e\n  \u003cli\u003eSmoked lens reduces glare while maintaining visibility\u003c\/li\u003e\n  \u003cli\u003eSuitable for daytime running light or marker applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install these on any vehicle grille or surface?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit is universal and intended for flat surfaces rather than a specific vehicle fitment. Installation methods vary: drill-mounted with included screws and gaskets, adhered with 3M tape, or secured with zip ties. Choose the method that best matches the mounting surface and weatherproofing needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal flat-surface design for trucks, trailers, RVs and buses\u003c\/li\u003e\n  \u003cli\u003eDrill-mount with provided screws and rubber gaskets for secure fit\u003c\/li\u003e\n  \u003cli\u003eAlternative mounting: strong double-sided tape or zip ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wiring options and wiring colors are provided?\u003c\/h3\u003e\n\u003cp\u003eThe lights are hardwired with two leads: red is positive and black is ground. Installers commonly tie the positive to a DRL\/parking light circuit, an auxiliary switch, or the headlight fuse so the bars illuminate with vehicle lights; use appropriate fuses and relays for safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-conductor wiring: red (positive) and black (ground)\u003c\/li\u003e\n  \u003cli\u003eCompatible with DRL, parking light, auxiliary switch or headlight circuits\u003c\/li\u003e\n  \u003cli\u003eRecommend adding a relay and fuse when tying into battery power\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these grille lights weatherproof and durable?\u003c\/h3\u003e\n\u003cp\u003eThe housings include rubber gaskets and come with mounting hardware to help seal the installation against moisture and dust. Because mounting and sealing depend on the installation method, additional sealant or proper gasket placement is recommended for long-term exposure to road spray and weather.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes rubber gaskets to help create a weather-resistant seal\u003c\/li\u003e\n  \u003cli\u003eSmoke-black lens paired with a durable housing for road use\u003c\/li\u003e\n  \u003cli\u003eAdditional sealant recommended for submerged or high-pressure wash conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Partswcgg smoked amber LED grille marker light kit is built for truck owners, fleet operators, trailer and RV enthusiasts, and DIY modifiers who want an affordable, universal way to add amber running or marker lights and a custom smoked appearance. If you need a non-vehicle-specific, surface-mount solution to upgrade visibility and style—especially for flat grille, bumper or trailer surfaces—this 4-piece 9-LED kit offers a straightforward retrofit option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these grille lights fit my truck's factory grille?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are universal for flat surfaces and not vehicle-specific; drilling or adhesive may be needed for secure mounting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wires are used and how do I wire them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each light has two wires: red positive and black ground. Tie the red to DRL, headlight, or an aux circuit and ground the black.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Partswcgg","offers":[{"title":"Default Title","offer_id":67595457691833,"sku":"B09TXPGZ53","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/partswcgg-front-view-smoked-amber-led-grille-kit.jpg?v=1790587788"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/partswcgg-front-view-smoked-amber-led-grille-kit.jpg?v=1790612657","url":"https:\/\/redleafauto.ca\/collections\/partswcgg.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}