{"title":"Power Steering Parts","description":"\u003cp\u003ePower steering pumps, hoses, reservoirs and steering components.\u003c\/p\u003e\u003cp\u003e123 products from 62 brands, including A-Premium, Rough Country, Dorman and Monroe. Most are priced between $67 and $260 CAD.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"rough-country-n3-dual-steering-stabilizer-for-2005-2024-ford-super-duty-twin-dampers-bolt-on-fit-8749130","title":"Rough Country N3 Dual Steering Stabilizer for 2005–2024 Ford Super Duty — Twin Dampers, Bolt-On Fit (8749130)","description":"\u003cstrong\u003eRough Country’s N3 Dual Steering Stabilizer for 2005–2024 Ford Super Duty reduces steering wobble and gives your truck firmer, more controlled handling.\u003c\/strong\u003e\n\n\u003cp\u003eBuilt specifically for Ford Super Duty models from 2005 through 2024, the Rough Country N3 Dual Steering Stabilizer (model 8749130) pairs a twin-damper setup with durable components to minimize bump steer, vibration, and wandering at highway speeds or under load. This bolt-on system boosts steering feel and protects steering components and tires, while Rough Country’s Limited Lifetime Replacement Warranty provides long-term backing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the N3 Dual Stabilizer improve driving control?\u003c\/h3\u003e\n\u003cp\u003eThe dual-damper design separates high- and low-frequency steering inputs so the system soaks up both small vibrations and larger impacts. That delivers a steadier wheel at speed and more confidence towing or carrying heavy loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo dampers tuned for different frequencies for balanced response.\u003c\/li\u003e\n  \u003cli\u003eReduces highway wander and kickback from rough surfaces.\u003c\/li\u003e\n  \u003cli\u003eLess feedback through the steering wheel during towing or off-road use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat specific durability and protection benefits will I see?\u003c\/h3\u003e\n\u003cp\u003eThe N3 protects steering linkage and related components by cutting down repeated shock and vibration, which helps extend the life of tires, ball joints, and other steering parts. Components are built to withstand daily driving, trail use, and towing stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable housings and seals resist dirt and moisture intrusion.\u003c\/li\u003e\n  \u003cli\u003eReduces wear on ball joints, tie rods, and steering gearbox.\u003c\/li\u003e\n  \u003cli\u003eHelps preserve even tire wear by limiting erratic steering movement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what’s included in the kit?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward with a bolt-on approach and clear instructions, so many owners can complete it in a few hours. The kit contains all necessary hardware and mounting components to fit Super Duty models within the specified years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete mounting brackets and grade hardware included.\u003c\/li\u003e\n  \u003cli\u003eStep-by-step install instructions supported by Rough Country.\u003c\/li\u003e\n  \u003cli\u003eNo vehicle modifications required—drilling rarely needed for stock setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the product come with warranty coverage?\u003c\/h3\u003e\n\u003cp\u003eThe N3 Dual Steering Stabilizer is covered by Rough Country’s Limited Lifetime Replacement Warranty, offering long-term reassurance against manufacturing defects. Warranty terms follow Rough Country’s standard policy—keep purchase documentation for claims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLimited Lifetime Replacement Warranty for qualifying defects.\u003c\/li\u003e\n  \u003cli\u003eRough Country customer support for installation and replacement questions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Rough Country N3 Dual Steering Stabilizer is ideal for owners of 2005–2024 Ford Super Duty trucks who want firmer steering feel, reduced bump steer, and increased longevity for steering and suspension components—especially those who tow, haul, or drive on rough roads. It’s suited to DIY installers and professional shops alike, delivering a bolt-on upgrade that balances on-road comfort with off-road resilience.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2017 Ford F-250 Super Duty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the N3 Dual Stabilizer 8749130 fits Ford Super Duty models from 2005 through 2024, including 2017 F-250s.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install it myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Many owners install it at home with basic tools; the kit includes hardware and Rough Country provides installation instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67584849608889,"sku":"B07CTVKY1V","price":365.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-front-packaging.jpg?v=1790456364"},{"product_id":"rough-country-n3-dual-steering-stabilizer-for-1999-2004-super-duty-4wd-dual-rod-bolt-on-upgrade-for-improved-steering-control","title":"Rough Country N3 Dual Steering Stabilizer for 1999-2004 Super Duty 4WD — dual-rod, bolt-on upgrade for improved steering control","description":"\u003cstrong\u003eRough Country's N3 Dual Steering Stabilizer is a bolt-on upgrade for 1999–2004 Super Duty 4WD trucks that improves steering control and reduces steering vibration.\u003c\/strong\u003e\n\n\u003cp\u003eIf you drive a late‑90s to early‑2000s Ford Super Duty 4WD, persistent steering shimmy, bump steer, or wandering at speed can be frustrating and accelerate wear on tires and steering parts. The Rough Country N3 dual stabilizer replaces the factory dampening with a dual‑rod design tuned to absorb shocks and vibrations, helping your truck track truer over uneven surfaces and while towing or hauling.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this stabilizer improve steering feel on rough roads?\u003c\/h3\u003e\n\u003cp\u003eThe N3 dual setup uses two internal damping elements to smooth out rapid jolts and oscillations transmitted through the front end. That results in a noticeably firmer, more composed steering response when encountering ruts, potholes, or washboard gravel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual‑rod design for increased dampening capacity\u003c\/li\u003e\n  \u003cli\u003eReduces quick steering oscillations and rebound\u003c\/li\u003e\n  \u003cli\u003eHelps maintain wheel alignment under impact\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it help reduce tire and steering component wear?\u003c\/h3\u003e\n\u003cp\u003eYes — by cutting down on steering vibration and bump steer, the N3 lessens the repeated stresses that contribute to premature tire cupping and accelerated ball joint or tie‑rod wear. The result is potentially longer component life and more even tire wear patterns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLimits damaging vibrations transmitted to suspension components\u003c\/li\u003e\n  \u003cli\u003ePromotes more consistent tire contact and wear\u003c\/li\u003e\n  \u003cli\u003eCan reduce shock loads to steering linkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is involved in installation and fitment for my truck?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed specifically for 1999–2004 Ford Super Duty 4WD models and installs with standard hand tools. Rough Country supplies hardware and mounting brackets so the stabilizer bolts into place without complex modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt‑on design tailored for Super Duty 1999–2004 4WD\u003c\/li\u003e\n  \u003cli\u003eIncluded hardware and brackets for direct fit\u003c\/li\u003e\n  \u003cli\u003eTypical install time: one to two hours for a mechanically inclined owner\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does Rough Country provide?\u003c\/h3\u003e\n\u003cp\u003eThe N3 dual steering stabilizer is covered by Rough Country's limited lifetime replacement warranty, giving you added confidence in long‑term durability. RC also offers installation guidance and customer support if you need help during the fitment process.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLimited lifetime replacement warranty from Rough Country\u003c\/li\u003e\n  \u003cli\u003eCustomer support and installation resources available\u003c\/li\u003e\n  \u003cli\u003eReplacement parts and service through Rough Country network\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Rough Country N3 Dual Steering Stabilizer is aimed at owners of 1999–2004 Ford Super Duty 4WD trucks who want a straightforward upgrade to tame steering wander, reduce vibration, and protect front‑end components — especially useful for trucks that tow, carry heavy loads, or see frequent off‑road use. If you want a durable, easy‑to‑install stabilizer tailored to your Super Duty, the N3 is a targeted option that balances improved handling with long‑term support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this stabilizer a direct fit for my 2001 Ford Super Duty 4WD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Rough Country N3 Dual Steering Stabilizer is made to directly fit 1999–2004 Ford Super Duty 4WD models without major modifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the N3 stabilizer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; common hand tools are typically sufficient and Rough Country provides the necessary brackets and hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67584898433209,"sku":"B07D3BNH5W","price":332.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-n3-front-view.jpg?v=1790458219"},{"product_id":"bilstein-front-steering-stabilizer-5100-series-single-for-2008-2016-f-250-f-350-valved-damping-zinc-coated","title":"Bilstein Front Steering Stabilizer 5100 Series Single for 2008–2016 F‑250\/F‑350 — Valved Damping, Zinc‑Coated","description":"\u003cp\u003e\u003cstrong\u003eBilstein’s 5100 front steering stabilizer for 2008–2016 Ford F-250 and F-350 Super Duty trucks reduces steering vibrations and sharpens handling without replacing your factory steering components.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis single Bilstein B8 5100 steering damper is engineered as an upgrade replacement for the front steering stabilizer on compatible Super Duty trucks. Built from durable materials and finished with zinc coating for corrosion resistance, the damper controls small, rapid steering movements that create feedback through the wheel. It pairs seamlessly with other B8 5100 series components and is sized to match factory mounting points, offering a straightforward way to restore steering confidence and improve highway stability.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this stabilizer reduce steering vibrations?\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein B8 5100 uses a valved damper design to absorb and dissipate low-amplitude, high-frequency steering inputs. That damping action prevents vibration from transferring through linkage into the steering wheel, so drivers feel fewer jolts and less wandering at speed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eValved piston design smooths rapid steering movements\u003c\/li\u003e\n  \u003cli\u003eZinc-coated body resists corrosion for consistent performance\u003c\/li\u003e\n  \u003cli\u003eMatches B8 5100 series valving characteristics for predictable response\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my 2008–2016 Ford F-250 or F-350 Super Duty?\u003c\/h3\u003e\n\u003cp\u003eThis Bilstein front steering stabilizer is manufactured to fit Super Duty trucks in model years 2008 through 2016 where the factory-style front damper is used. It is a direct-replacement aftermarket unit designed to use the original mounting points and hardware for an easy install.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplication: 2008–2016 Ford F-250 and F-350 Super Duty trucks\u003c\/li\u003e\n  \u003cli\u003eSingle front steering damper: designed as a factory-style replacement\u003c\/li\u003e\n  \u003cli\u003eInstall uses existing mounts—no custom fabrication required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat improvements can I expect in handling and comfort?\u003c\/h3\u003e\n\u003cp\u003eAfter installing the B8 5100 stabilizer you should notice reduced steering feedback from road irregularities and improved centerline tracking. Drivers typically experience steadier highway steering, less sudden wheel oscillation, and an overall more controlled feel when towing or driving on uneven surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduced steering kick and shimmy on rough roads\u003c\/li\u003e\n  \u003cli\u003eImproved straight-line stability at highway speeds\u003c\/li\u003e\n  \u003cli\u003eBetter steering feel while towing or hauling heavy loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specs and durability features?\u003c\/h3\u003e\n\u003cp\u003eThe damper is zinc coated to protect against rust and environmental wear, and it shares valving and fitment characteristics with other B8 5100 series products for consistent behavior across a suspension setup. The unit ships in compact packaging and is manufactured in the United States to Bilstein quality standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduct type: Auto part — B8 5100 front steering damper\u003c\/li\u003e\n  \u003cli\u003ePackage dimensions: 10.16 cm L x 10.16 cm W x 68.58 cm H\u003c\/li\u003e\n  \u003cli\u003ePackage weight: 5.6 lbs; country of origin: United States\u003c\/li\u003e\n  \u003cli\u003eZinc-coated finish for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Bilstein 5100 front steering stabilizer is aimed at owners of 2008–2016 Ford F-250 and F-350 Super Duty trucks who want to reduce steering vibrations, restore steering control on older vehicles, or enhance highway stability when towing. It suits DIY installers and professional shops seeking a direct-fit, durable upgrade that complements other B8 5100 suspension components without altering factory geometry.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this steering stabilizer a direct bolt-on for 2008–2016 F-250\/F-350?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is designed as a direct-replacement front steering damper using the factory mounting points for those model years.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the Bilstein 5100 resist corrosion?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The damper features a zinc-coated body to help protect against rust and environmental wear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67584940900537,"sku":"B009FU6WTO","price":273.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bilstein-5100-front-stabilizer-front-view.jpg?v=1790460073"},{"product_id":"daysyore-power-steering-pump-for-jeep-cherokee-wrangler-1996-2001-direct-fit-replacement-rebuilt-durability","title":"Daysyore power steering pump for Jeep Cherokee Wrangler 1996-2001 direct-fit replacement, rebuilt durability","description":"\u003cp\u003e\u003cstrong\u003eThe Daysyore Power Steering Pump 20-38771 is a direct-fit replacement pump designed to restore reliable steering assist for compatible Cherokee, XJ and Wrangler models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle shows signs of leaking fluid, noisy or hard-to-turn steering, replacing the pump often brings back predictable steering feel. This Daysyore unit (part numbers include 20-38771, 52087871, RL087871AE and several cross-references) is engineered to match the form and function of the original equipment for many 1996–2001 Cherokee and 1997–2003 XJ\/Wrangler models. It’s built from durable materials to address common failure modes and to simplify installation for mechanics and experienced DIYers.\u003c\/p\u003e\n\n\u003ch3\u003eWill this pump fit my Jeep Cherokee or Wrangler?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on year, model and original pump configuration; this Daysyore pump covers a range of late-90s to early-2000s Jeep XJ and Wrangler platforms. Always confirm the part numbers and vehicle specifics before purchasing to avoid returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon compatible years: 1996–2001 Cherokee, 1997–2003 XJ\/Wrangler\u003c\/li\u003e\n  \u003cli\u003eCross-reference part numbers: 20-38771, 52087871, RL087871AE, AD55-7140, 36P1488\u003c\/li\u003e\n  \u003cli\u003eCheck the vehicle’s VIN or factory parts sticker for exact match\u003c\/li\u003e\n  \u003cli\u003eContact seller with your year\/model for a final compatibility check\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat problems does replacing the steering pump address?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn pump targets symptoms caused by hydraulic failure or mechanical wear inside the pump. Expect improved steering responsiveness and fewer abnormal noises when the pump and associated plumbing are the root cause of the issue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStops leaks originating at the pump housing or seals\u003c\/li\u003e\n  \u003cli\u003eReduces groaning, whining, or squealing related to pump wear\u003c\/li\u003e\n  \u003cli\u003eRestores hydraulic pressure for lighter steering effort at low speeds\u003c\/li\u003e\n  \u003cli\u003ePrevents further drivetrain stress from a failing pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what should I check?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard power steering pump replacement steps but varies by model and engine bay layout. An intermediate-level mechanic can typically install this pump with basic hand tools, proper fluid, and bleeding of the system after fitting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect hoses, belt condition, and mounting bracket before installation\u003c\/li\u003e\n  \u003cli\u003eUse recommended power steering fluid and follow proper bleeding procedure\u003c\/li\u003e\n  \u003cli\u003eTorque mounting fasteners to factory specifications to avoid misalignment\u003c\/li\u003e\n  \u003cli\u003eVerify no leaks and normal steering operation during road-test\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and seller support does Daysyore provide?\u003c\/h3\u003e\n\u003cp\u003eDaysyore offers customer support for quality concerns and aims to respond quickly to product inquiries. If you encounter a defect or fitment issue, the seller requests you contact them so they can offer a resolution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCustomer service promises response within 24 hours via email\u003c\/li\u003e\n  \u003cli\u003eSupport available for fitment questions prior to purchase\u003c\/li\u003e\n  \u003cli\u003eGuidance provided for returns or replacements if a verified defect exists\u003c\/li\u003e\n  \u003cli\u003eKeep proof of purchase and vehicle details to expedite support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Daysyore pump is aimed at owners and mechanics working on late-1990s to early-2000s Jeep Cherokee and XJ\/Wrangler vehicles who need a robust, OE-style replacement. It’s suited for people who have diagnosed pump-related steering issues—leaks, noise, or hard steering—or who prefer replacing an aging pump proactively during restoration or maintenance. Confirm fitment against your vehicle details and the listed cross-reference numbers before ordering to ensure a smooth swap.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this 20-38771 pump fit my 1999 Cherokee?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Possibly—1996–2001 Cherokees are commonly compatible. Confirm by matching your original part number or contacting the seller with year and VIN.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What should I replace when installing this pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace the drive belt if worn, inspect hoses and clamps, and use fresh power steering fluid while bleeding the system.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Daysyore","offers":[{"title":"Default Title","offer_id":67584943259833,"sku":"B0BZCL23GS","price":194.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/daysyore-power-steering-pump-front-view.jpg?v=1790460249"},{"product_id":"daysyore-power-steering-pump-for-honda-civic-2006-2011-1-8l-direct-fit-oe-quality-quieter-steering","title":"Daysyore Power Steering Pump for Honda Civic 2006-2011 1.8L — Direct-Fit OE-Quality, Quieter Steering","description":"\u003cp\u003e\u003cstrong\u003eDaysyore Power Steering Pump 21-5456 is a direct-fit replacement pump engineered to restore smooth, quieter steering on 2006–2011 Honda Civic 1.8L models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Civic exhibits whining when turning, delayed steering response, or unusual groaning and squealing at startup, the pump may be failing. The Daysyore 21-5456 (also referenced as 21527, 56110RNA305, 56110RNAA01, 56110RNAA02) is manufactured to OE-quality standards and designed to match factory mounting, pulley spacing, and hydraulic performance so installation is straightforward for mechanics and DIYers comfortable with steering system service.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this pump affect daily driving and steering feel?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn pump with the Daysyore 21-5456 returns hydraulic assist to proper levels, reducing effort at the wheel and minimizing whining or groaning noises. You should notice smoother turn-in and consistent feedback at low speeds and during tight maneuvers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct hydraulic pressure for predictable steering effort\u003c\/li\u003e\n  \u003cli\u003eReduces noise like squeals and groans during start-up and turning\u003c\/li\u003e\n  \u003cli\u003eImproves responsiveness at parking and low-speed turns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this truly a direct replacement for my 2006–2011 Civic 1.8L?\u003c\/h3\u003e\n\u003cp\u003eYes — the 21-5456 is built to match the original equipment’s critical dimensions and mounting points for 2006–2011 Honda Civic 1.8L variants. Always cross-check your vehicle’s VIN, model year, and the existing pump part number before purchasing to avoid fitment mistakes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for listed part numbers (21527, 56110RNA305, etc.)\u003c\/li\u003e\n  \u003cli\u003eDesigned for the 2006–2011 Honda Civic 1.8L family of models\u003c\/li\u003e\n  \u003cli\u003eMounting holes and pulley alignment mirror factory specification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I inspect before installing this replacement pump?\u003c\/h3\u003e\n\u003cp\u003eConfirm the pump part number on the old unit and verify the Civic’s model year and engine size. Also check hoses, belts, and fluid condition; replacing the pump while other steering components are worn can shorten the new pump’s life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare original pump part number with 21-5456 and listed cross-references\u003c\/li\u003e\n  \u003cli\u003eInspect power steering hoses, belt condition, and pulley alignment\u003c\/li\u003e\n  \u003cli\u003eFlush and refill system with the correct fluid after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty support and customer help does Daysyore provide?\u003c\/h3\u003e\n\u003cp\u003eDaysyore offers customer support for quality concerns and aims to respond by email within 24 hours to resolve issues. If you receive a defective product or have fitment questions, contact Daysyore so they can advise on returns, replacements, or troubleshooting steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEmail support with a typical 24-hour response window\u003c\/li\u003e\n  \u003cli\u003eHelp verifying fitment and part-number compatibility\u003c\/li\u003e\n  \u003cli\u003eGuidance on installation concerns and troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This pump is aimed at Civic owners, independent repair shops, and experienced DIYers who need a reliable, OE-quality replacement for a failing power steering pump on 2006–2011 Honda Civic 1.8L models. Choose this unit if you want a like-for-like mechanical replacement that aims to restore factory steering feel and reduce noise, provided you verify year, engine, and part-number compatibility before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this pump fit my 2008 Honda Civic 1.8L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Daysyore 21-5456 is a direct-fit for 2006–2011 Civic 1.8L models but confirm your current pump part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the pump come with a warranty or support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Daysyore offers customer support with email responses typically within 24 hours and assistance for quality or fitment issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Daysyore","offers":[{"title":"Default Title","offer_id":67584946176185,"sku":"B0BZGZYCLD","price":188.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/daysyore-power-steering-pump-front-view_0397ad07-eb47-4c88-8f04-42e60534482c.jpg?v=1790460432"},{"product_id":"a-premium-power-steering-pump-with-pulley-for-honda-acura-v6-3-5l-3-7l-direct-fit-preassembled-12-month-warranty","title":"A-Premium power steering pump with pulley for Honda\/Acura V6 (3.5L\/3.7L) — direct-fit, preassembled, 12‑month warranty","description":"\u003cp\u003e\u003cstrong\u003eA-Premium Power Steering Pump with Pulley is a brand-new replacement steering assist pump designed to fit specified Honda and Acura V6 engines, supplied without a reservoir and backed by a one-year warranty.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis direct-fit power steering pump is engineered as a replacement for several Honda and Acura models using 3.5L and 3.7L V6 engines. It arrives pre-assembled with the pulley installed and is intended for vehicles that use a hose-barb inlet and a bolt-on outlet. The unit is new (not remanufactured) and includes a 12-month warranty for added peace of mind.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines is this pump compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis pump is compatible with Honda Odyssey (2005–2010) and Honda Pilot (2005–2008) with V6 3.5L engines, plus Acura MDX (2007–2013) V6 3.7L engines. It matches engines commonly labeled J35 or J37 and replaces multiple OE reference numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHonda Odyssey 2005–2010, V6 3.5L\u003c\/li\u003e\n  \u003cli\u003eHonda Pilot 2005–2008, V6 3.5L\u003c\/li\u003e\n  \u003cli\u003eAcura MDX 2007–2013, V6 3.7L\u003c\/li\u003e\n  \u003cli\u003eFits engines with J35 \/ J37 codes and listed OE part numbers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and what’s included?\u003c\/h3\u003e\n\u003cp\u003eThe pump ships brand new with the pulley already mounted and does not include a reservoir. It uses a hose-barb inlet and a bolt-on outlet, with an outlet ID of approximately 0.71 inches. A one-year (12 month) warranty covers the unit under normal use conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCondition: brand new, not remanufactured\u003c\/li\u003e\n  \u003cli\u003eIncludes: pump assembly with pulley installed\u003c\/li\u003e\n  \u003cli\u003eDoes not include: power steering fluid reservoir\u003c\/li\u003e\n  \u003cli\u003eConnections: hose-barb inlet; bolt-on outlet; outlet ID ~0.71\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I avoid common noise or fitment issues after installation?\u003c\/h3\u003e\n\u003cp\u003eNoise often comes from a worn or missing intake hose O-ring; replacing that small seal during installation is strongly recommended. Confirm hose and bolt sizes before tightening, and compare reference part numbers to ensure correct fitment for your chassis and engine code.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace intake hose O-ring (often orange or black) to prevent noise\u003c\/li\u003e\n  \u003cli\u003eVerify hose barb and outlet bolt sizes match vehicle fittings\u003c\/li\u003e\n  \u003cli\u003eCompare OE reference numbers before ordering or installing\u003c\/li\u003e\n  \u003cli\u003eBleed the steering system per manufacturer instructions after install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat reference numbers and part identifiers does this replace?\u003c\/h3\u003e\n\u003cp\u003eThis A-Premium unit corresponds to multiple OE and aftermarket reference numbers used across Honda and Acura applications. Use these identifiers when cross-checking compatibility with your vehicle’s parts catalog or a parts counter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon references: 21-5442, 215442, 96-5442, 965442\u003c\/li\u003e\n  \u003cli\u003eOEM-style numbers: 56110-RGL-305, 56110-RGL-A01, 56110-RYE-A02, etc.\u003c\/li\u003e\n  \u003cli\u003eAlternative formats: 56110RGL305, 56110RGLA01, 56110RYEA02\u003c\/li\u003e\n  \u003cli\u003eProvide your VIN or existing part number to confirm fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This A-Premium power steering pump is intended for owners, mechanics, and DIY enthusiasts replacing a failing pump on compatible Honda Odyssey, Pilot, or Acura MDX models. It’s suitable when you need a new, direct-fit pump with pulley included, and you’re prepared to supply or reuse a reservoir and replace small sealing parts like the intake hose O-ring during installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump include the reservoir?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the A-Premium pump ships with the pulley installed but does not include the power steering reservoir.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What models and years does it fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Honda Odyssey 2005–2010 (3.5L), Pilot 2005–2008 (3.5L), and Acura MDX 2007–2013 (3.7L).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67584980713657,"sku":"B07TH1LRK7","price":200.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-front-view-pump-with-pulley.jpg?v=1790462010"},{"product_id":"daysyore-power-steering-pump-for-infiniti-nissan-v6-3-5l-3-7l-21-394-direct-replacement-quiet-smooth-steering","title":"Daysyore Power Steering Pump for Infiniti\/Nissan V6 3.5L–3.7L — 21-394 Direct Replacement, Quiet Smooth Steering","description":"\u003cp\u003e\u003cstrong\u003eDaysyore Power Steering Pump 21-394 is a direct-replacement steering assist pump engineered to restore smooth, quiet steering for compatible Infiniti and Nissan V6 3.5L\/3.7L models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle shows symptoms like hard steering at low speeds, whining from the engine bay, or visible fluid leakage, a failing pump is often the cause. The Daysyore 21-394 (also referenced by numbers such as 21-415, 21-416, 18601492-101\/102\/103, 491101CB0A\/B, 49110-1CB0A\/B, 491101EA0A, and 49110JK200) is manufactured to match OE dimensions and restore hydraulic assist. It fits a broad range of Infiniti and Nissan models including EX35\/EX37, FX35\/FX37, G35\/G37, M35, Q40\/Q50\/Q60\/Q70\/Q70L, QX50, and QX70 with 3.5L and 3.7L V6 engines — but always verify fitment against your vehicle year and VIN before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eHow will the Daysyore pump affect steering feel and noise?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn pump with this Daysyore unit returns hydraulic pressure to specification so the steering wheel turns smoothly at low speeds and maneuvers. You should notice reduced whining, groaning, or squealing noises that occur during start-up or tight turns. Proper hydraulic function also eases steering effort and reduces steering binding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores hydraulic assist for smoother low-speed steering\u003c\/li\u003e\n  \u003cli\u003eReduces common pump noises like whining or groaning\u003c\/li\u003e\n  \u003cli\u003eOEM-style mounting locations for correct alignment\u003c\/li\u003e\n  \u003cli\u003eWorks with factory power steering hoses and pulleys\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this pump fit?\u003c\/h3\u003e\n\u003cp\u003eThe Daysyore 21-394 is compatible with many Infiniti and related Nissan V6 3.5L\/3.7L platforms. Fitment covers EX, FX, G, M, Q and QX series models across several years; check the vehicle application guide carefully. The pump is cross-referenced to several OE and aftermarket part numbers to help you confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Infiniti EX35\/EX37, FX35\/FX37, G35\/G37, M35\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Infiniti Q40\/Q50\/Q60\/Q70\/Q70L, QX50, QX70\u003c\/li\u003e\n  \u003cli\u003eCross-reference: 21-394, 21-415, 21-416, 18601492-101\/102\/103\u003c\/li\u003e\n  \u003cli\u003eAdditional references: 491101CB0A\/B, 49110-1CB0A\/B, 491101EA0A, 49110JK200\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering or installing?\u003c\/h3\u003e\n\u003cp\u003eConfirm your vehicle’s exact model year, engine displacement, and VIN-based parts lookup to ensure correct fitment. Inspect the existing pump for signs of leakage, worn pulley, or metal shavings; replacing hoses or fluid at install time helps prevent premature wear. If uncertain, provide your VIN to the seller or consult a mechanic for verification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify vehicle year, model, and VIN against fitment listings\u003c\/li\u003e\n  \u003cli\u003eInspect hoses and pulley condition during replacement\u003c\/li\u003e\n  \u003cli\u003eFlush or replace power steering fluid when installing a new pump\u003c\/li\u003e\n  \u003cli\u003eContact Daysyore support with questions before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Daysyore power steering pump is aimed at owners and technicians restoring steering performance on Nissan- and Infiniti-platform cars with 3.5L or 3.7L V6 engines who need an affordable, OE-form replacement. It suits DIY mechanics familiar with belt- and hydraulic-system service, shops performing routine steering repairs, and anyone dealing with leaks, noise, or stiff steering where a pump replacement is indicated. Always match the pump’s listed part numbers and vehicle fitment to your VIN before purchase to ensure a correct, hassle-free installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump fit my Infiniti EX35?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits many EX35 model years with 3.5L V6, but confirm using your vehicle year and VIN against the listed part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation hardware included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The pump ships without fluid hoses or belts; mounting hardware typically matches OE locations but check your kit details before starting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Daysyore","offers":[{"title":"Default Title","offer_id":67585039433913,"sku":"B0BZCGF4XZ","price":176.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/daysyore-power-steering-pump-front-view_e69be7b3-1b82-4a95-805f-2b443b83ba41.jpg?v=1790464664"},{"product_id":"a-premium-power-steering-pump-with-pulley-direct-fit-for-acura-honda-l4-2-0-2-4l-seal-kit-1-yr-warranty","title":"A-Premium Power Steering Pump with Pulley — Direct-fit for Acura\/Honda L4 2.0–2.4L, seal kit \u0026 1-yr warranty","description":"\u003cp\u003e\u003cstrong\u003eThe A-Premium power steering pump with pulley is a brand-new, direct-fit replacement engineered to restore steering assist for compatible Acura and Honda 4-cylinder models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle is showing signs of reduced steering assist, whining, or fluid leaks, replacing the pump with a correct-fit unit is often the most reliable repair. This A-Premium pump ships brand-new (not remanufactured), includes the pulley and a seal kit, fits a range of Acura and Honda 2.0–2.4L four-cylinder engines, and carries a one-year unlimited-mileage warranty for added confidence.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does this pump fit?\u003c\/h3\u003e\n\u003cp\u003eThis pump is designed for a specific set of Acura and Honda four-cylinder models. Always verify the part reference numbers and physical connection types before ordering to confirm fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAcura RDX 2007–2012 L4 2.3L, RSX 2002–2006 L4 2.0L, TSX 2006–2008 L4 2.4L\u003c\/li\u003e\n  \u003cli\u003eHonda Accord 2006–2007 L4 2.4L; CR-V 2002 and 2005–2011 L4 2.4L; Element 2006–2011 L4 2.4L\u003c\/li\u003e\n  \u003cli\u003eReference part numbers: 96-5419, 21-5419, 965419, 215419, 56110PZDA02, 56110PNB306, 56110PNBA01, 56110PNBA03013\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what connection types does it use?\u003c\/h3\u003e\n\u003cp\u003eThe unit ships brand-new and includes the pulley and seal kit to simplify installation. It does not include a reservoir; inlet and outlet connection styles are specified so you can match your vehicle’s hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: power steering pump with pulley and a seal kit\u003c\/li\u003e\n  \u003cli\u003eNot included: reservoir (pump sold without reservoir)\u003c\/li\u003e\n  \u003cli\u003eInlet attachment: hose barb; outlet attachment: threaded\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I avoid noise or premature failure after installation?\u003c\/h3\u003e\n\u003cp\u003eNoise is commonly caused by an old or damaged intake hose O-ring. Replacing that O-ring during pump installation prevents air ingestion and reduces whining or cavitation sounds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace intake hose O-ring (often orange or black) when installing the pump\u003c\/li\u003e\n  \u003cli\u003eUse the provided seal kit to ensure leak-free connections\u003c\/li\u003e\n  \u003cli\u003eBleed the steering system per manufacturer instructions to remove air pockets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the product condition and warranty details?\u003c\/h3\u003e\n\u003cp\u003eThis is a new, non-remanufactured unit backed by A-Premium’s one-year unlimited-mileage guarantee. That warranty covers defects in materials and workmanship; check your seller for return and installation policies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCondition: Brand new (not remanufactured)\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year (12 months), unlimited mileage\u003c\/li\u003e\n  \u003cli\u003eQuality assurance: manufactured to match OE fitment and mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This A-Premium power steering pump is aimed at DIY mechanics, independent shops, and owners of the listed Acura and Honda models who need a reliable, direct-fit replacement. If you require a pump with a pulley included, want OEM-style inlet\/outlet connections, and plan to replace the intake hose O-ring during service, this unit provides a straightforward, warrantied solution to restore steering assist.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump include the reservoir?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the A-Premium pump includes the pulley and seal kit but is sold without the reservoir.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which O-ring should I replace to prevent noise?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace the intake hose O-ring (usually orange or black) during installation to avoid whining or cavitation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67585047593145,"sku":"B0D95PTKTD","price":240.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-front-view-pump-with-pulley_fc377ea2-ee6e-4cf3-9758-a9b690707f1a.jpg?v=1790464983"},{"product_id":"rough-country-n3-dual-steering-stabilizer-for-07-18-jeep-wrangler-jk-twin-dampers-progressive-valving","title":"Rough Country N3 Dual Steering Stabilizer for 07–18 Jeep Wrangler JK - Twin dampers, progressive valving","description":"\u003cp\u003e\u003cstrong\u003eThe Rough Country N3 Dual Steering Stabilizer (8734930) is a bolt-on upgrade that reduces bump steer and vibration while improving steering control for 2007–2018 Jeep Wrangler JK models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your JK feels twitchy over rough terrain or wanders on uneven pavement, the N3 Dual Steering Stabilizer is engineered to sharpen steering feedback and absorb impact from bumps. This dual-stabilizer setup combines heavy-duty construction with progressive damping to smooth steering inputs, protect steering components, and extend tire life, all while keeping installation straightforward for DIYers and shops.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the N3 Dual Steering Stabilizer improve steering feel?\u003c\/h3\u003e\n\u003cp\u003eThe N3 system uses two matched dampers to reduce quick jabs and oscillations sent through the steering linkage. That yields steadier wheel return-to-center and fewer sudden steering corrections on washboard roads and rocky trails.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-stabilizer design for balanced damping across the trackbar and tie rod.\u003c\/li\u003e\n  \u003cli\u003eProgressive valving that tames both small vibrations and larger impacts.\u003c\/li\u003e\n  \u003cli\u003eHeavier-duty mounting points to resist flex under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it lower vibration and protect my front-end parts?\u003c\/h3\u003e\n\u003cp\u003eYes—the stabilizers absorb energy that would otherwise travel into tires, ball joints, and tie rods, which can reduce premature wear. That buffering action helps maintain alignment and decreases the frequency of component replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces bump steer and steering wheel shimmy.\u003c\/li\u003e\n  \u003cli\u003eHelps preserve tires, ball joints, and other steering components.\u003c\/li\u003e\n  \u003cli\u003eDesigned to work with common JK lift heights and factory geometry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation complicated or will I need special tools?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a straightforward bolt-on process supported by Rough Country instructions. Most home mechanics with basic hand tools can do the swap; the kit includes the necessary brackets and hardware for direct fitment on 2007–2018 Jeep Wrangler JK models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit brackets and hardware included for JK models.\u003c\/li\u003e\n  \u003cli\u003eNo welding or frame modification required.\u003c\/li\u003e\n  \u003cli\u003eTypical install time: 1–2 hours depending on experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and durability can I expect from this part?\u003c\/h3\u003e\n\u003cp\u003eThe N3 Dual Steering Stabilizer carries Rough Country’s limited lifetime replacement warranty, reflecting the brand’s confidence in construction and longevity. Components are built to withstand off-road abuse while remaining serviceable for long-term use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLimited lifetime replacement warranty through Rough Country.\u003c\/li\u003e\n  \u003cli\u003eRugged materials and corrosion-resistant finishes for durability.\u003c\/li\u003e\n  \u003cli\u003eServiceable design for straightforward maintenance or replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Rough Country N3 Dual Steering Stabilizer (8734930) is aimed at Jeep Wrangler JK owners—daily drivers and trail enthusiasts—who want firmer steering control, lower vibration, and added protection for front-end parts. It’s especially useful for vehicles that see mixed road and off-road use or those with lift kits that amplify steering feedback. If you want a reliable, bolt-on upgrade that improves handling without complex installation, this kit is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the N3 Dual Steering Stabilizer fit my 2014 Jeep Wrangler JK?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 8734930 kit is a direct-fit for 2007–2018 Jeep Wrangler JK models with included mounting hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an alignment after installing the stabilizer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: An alignment is recommended after any steering or suspension change to ensure optimal tire wear and handling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67585048674489,"sku":"B07D3BR1P9","price":371.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-n3-dual-stabilizer-front-view.jpg?v=1790465021"},{"product_id":"bilstein-5100-series-steering-damper-for-silverado-sierra-2500-1999-2010-monotube-gas-charged","title":"Bilstein 5100 Series Steering Damper for Silverado\/Sierra 2500 (1999–2010) - Monotube, Gas-Charged","description":"\u003cp\u003e\u003cstrong\u003eBilstein 33-174525 5100 Series steering damper is a monotube front steering shock engineered to reduce steering wander and maintain consistent damping for 1999–2010 Silverado 2500 and Sierra 2500 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis single steering damper from Bilstein is designed as a direct-fit replacement for select Chevrolet Silverado and GMC Sierra 2500\/2500 HD trucks. Built with a monotube construction and high gas pressure charging, it aims to deliver predictable steering feedback under heavy loads and rough road surfaces. The unit helps prevent oil aeration and fade so the damping force remains steady during demanding driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this damper improve steering stability?\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein 5100 steering damper counters steering kick and wobble by supplying continuous, controlled resistance through a monotube design. Because it uses high gas pressure to prevent oil foaming, the unit sustains damping performance even under repeated impacts or when towing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonotube body for steady, fade-resistant damping\u003c\/li\u003e\n  \u003cli\u003eHigh gas pressure prevents oil aeration for consistent force\u003c\/li\u003e\n  \u003cli\u003eDirect-fit for factory mounting points, preserving steering geometry\u003c\/li\u003e\n  \u003cli\u003eImproves control when hauling or driving off-road\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my 1999–2010 Silverado or Sierra 2500?\u003c\/h3\u003e\n\u003cp\u003eThis 33-174525 damper is manufactured to match fitment for 1999–2004 Silverado 2500 and Sierra 2500, plus 2001–2010 Silverado 2500 HD and Sierra 2500 HD models. Always compare part numbers and mounting style with the truck’s existing steering damper to confirm compatibility before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits specified Silverado 2500 and Sierra 2500 model years listed\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement design for original mounting points\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle VIN or current damper part number for exact match\u003c\/li\u003e\n  \u003cli\u003eIncludes features tailored to heavy-duty truck applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the Bilstein 5100 steering damper durable?\u003c\/h3\u003e\n\u003cp\u003eBilstein uses robust materials and corrosion-resistant finishes to extend service life in harsh conditions. The combination of a single-tube architecture and pressurized gas charge reduces internal wear and keeps damping predictable over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength components resist wear under heavy loads\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant treatment for extended durability\u003c\/li\u003e\n  \u003cli\u003eGas-charged system minimizes internal foaming and degradation\u003c\/li\u003e\n  \u003cli\u003eEngineered for repeated impacts common to truck duty cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will installation impact daily driving and towing?\u003c\/h3\u003e\n\u003cp\u003eAfter installation, drivers typically notice reduced steering vibration and more composed handling while towing or driving on rough surfaces. The damper works passively with the steering system, improving comfort and driver confidence without altering steering ratios.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces steering shake and highway wander\u003c\/li\u003e\n  \u003cli\u003eMaintains steady damping when towing heavy loads\u003c\/li\u003e\n  \u003cli\u003eNo steering system re-tune required for normal use\u003c\/li\u003e\n  \u003cli\u003eDesigned as a direct replacement for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Owners of Chevrolet Silverado 2500 or GMC Sierra 2500\/2500 HD trucks from the covered model years who need a reliable, long-lasting steering damper to combat steering vibration, especially those who tow, carry heavy loads, or drive on rough roads. It’s also appropriate for technicians and fleet managers seeking a direct-fit Bilstein replacement that prioritizes consistent damping and corrosion resistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this steering damper a direct replacement for my truck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits 1999–2004 Silverado 2500 and 2001–2010 Silverado 2500 HD and matching Sierra 2500 models as a direct-fit replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the damper require special maintenance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No routine maintenance is required; it’s a sealed, gas-charged unit designed for long-term, maintenance-free service.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67585052311737,"sku":"B007N6PPQS","price":259.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bilstein-steering-damper-front-view.jpg?v=1790465165"},{"product_id":"a-premium-power-steering-pump-with-reservoir-direct-fit-for-gm-trucks-suvs-no-pulley-oe-mounting","title":"A-Premium Power Steering Pump with Reservoir — Direct-Fit for GM Trucks \u0026 SUVs, No Pulley, OE Mounting","description":"\u003cp\u003e\u003cstrong\u003eThe A-Premium Power Steering Pump with Reservoir is a brand-new, direct-fit replacement pump designed to restore steering assist on compatible Chevrolet, GMC, Cadillac and Hummer models without a pulley but including a pre-mounted fluid reservoir.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aftermarket power steering pump is built to match OE mounting points and fluid connections for a broad range of GM vehicles from the late 1990s through the mid-2010s. It arrives new (not remanufactured), with hose-barb inlet and threaded outlet fittings, and carries a 12-month unlimited-mileage warranty from A-Premium. The unit ships without a pulley so you can reuse your original pulley or have one pressed on locally.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this pump fit and how accurate is the compatibility?\u003c\/h3\u003e\n\u003cp\u003eThis pump covers many full-size GM trucks and SUVs across specific model years, making it a practical option when an exact replacement is required. Compatibility is based on OEM reference numbers and common factory configurations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: C2500, K2500 models (1996); Silverado 1500 (1999–2003); Avalanche and Suburban lines (2003, 2007–2014 as listed).\u003c\/li\u003e\n  \u003cli\u003eGMC: C2500\/K2500 equivalents, Sierra 1500 (1999–2013), Yukon and Yukon XL (selected years).\u003c\/li\u003e\n  \u003cli\u003eCadillac: Escalade, Escalade ESV and Escalade EXT across 2002–2003 and 2007–2014 ranges where specified.\u003c\/li\u003e\n  \u003cli\u003eHummer: H2 fitment for 2008–2009 models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connections and hardware does the pump include?\u003c\/h3\u003e\n\u003cp\u003eThe A-Premium unit is supplied without a pulley but includes the reservoir and factory-style inlet\/outlet attachment types so installation uses standard hoses and fittings. Confirm your vehicle’s hose types and pulley arrangement before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInlet attachment: hose barb for clamp-style hose connection.\u003c\/li\u003e\n  \u003cli\u003eOutlet attachment: threaded fitting matching OEM line threads.\u003c\/li\u003e\n  \u003cli\u003eReservoir: pre-attached to simplify plumbing and reduce potential leaks.\u003c\/li\u003e\n  \u003cli\u003ePulley: not included — reuse original pulley or have a replacement pressed on.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the replacement process typically go and what should technicians expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard power steering pump replacement steps: drain system, disconnect lines, unbolt pump, transfer pulley if needed, mount new pump and bleed the system. Expect routine checks for leaks and belt alignment after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrain and capture old fluid before unbolting lines to avoid spills.\u003c\/li\u003e\n  \u003cli\u003eInspect hoses and return line threads for damage; replace seals if required.\u003c\/li\u003e\n  \u003cli\u003eIf reusing the old pulley, have it pressed off and pressed onto the new pump by a shop press.\u003c\/li\u003e\n  \u003cli\u003eBleed the steering system per vehicle service procedures to remove air pockets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and part references back this A-Premium pump?\u003c\/h3\u003e\n\u003cp\u003eA-Premium backs this pump with a one-year (12-month) unlimited-mileage warranty, offering replacement coverage for manufacturing defects. Multiple OEM and aftermarket reference numbers are listed to help verify fitment before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWarranty: 12 months unlimited mileage from A-Premium.\u003c\/li\u003e\n  \u003cli\u003eReference numbers: includes 20-8740, 208740, 15076612, 15234826, 20756714, and others for cross-reference.\u003c\/li\u003e\n  \u003cli\u003eCondition: brand-new unit (not remanufactured), factory-style reservoir attached.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This pump is intended for owners, mechanics and restoration shops working on late‑1990s through mid‑2010s GM full-size trucks and SUVs that require a direct-fit, new replacement pump with a reservoir. Choose this unit if you need an OE-style inlet\/outlet layout, want a brand-new assembly backed by a 12-month guarantee, and are prepared to reuse or source a pulley separately.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump come with a pulley?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the pump ships without a pulley; reuse your original pulley or have one pressed on locally.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty does A-Premium provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A-Premium offers a 12-month unlimited-mileage warranty covering manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67585053589689,"sku":"B082SGHXD7","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-power-steering-pump-front-view.jpg?v=1790465237"},{"product_id":"jianggai-yoke-racing-steering-wheel-for-tesla-model-3-model-y-black-microfiber-leather-heated-no-front-trim","title":"JIANGGAI Yoke Racing Steering Wheel for Tesla Model 3\/Model Y Black Microfiber Leather — Heated, No Front Trim","description":"\u003cp\u003e\u003cstrong\u003eThe JIANGGAI Yoke Racing Steering Wheel is a heated, black microfiber leather yoke replacement designed to fit Tesla Model 3 (2017–2023) and Model Y (2019–2024) vehicles that originally included a heated steering wheel.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premium replacement swaps your factory round wheel for a modern yoke-style steering wheel finished in breathable, wear-resistant microfiber leather. It’s crafted to expand the driver’s field of view and deliver a sportier cabin aesthetic while retaining the steering heater function on compatible Teslas. The package includes the yoke and heating cable; buttons and front trim are not included and professional installation is recommended.\u003c\/p\u003e\n\n\u003ch3\u003eWhat visual and tactile improvements does the JIANGGAI yoke deliver?\u003c\/h3\u003e\n\u003cp\u003eExpect a striking, futuristic appearance paired with a firmer, more tactile grip than many stock wheels. The microfiber leather surface is stitched with precision to feel natural underhand while resisting cold and general wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSporty yoke silhouette that opens the dashboard sightline by over 70%\u003c\/li\u003e\n  \u003cli\u003eBreathable microfiber leather for comfortable grip in varied temperatures\u003c\/li\u003e\n  \u003cli\u003eDetailed stitching for a premium look and improved hand feel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the heating function work and which cars keep it?\u003c\/h3\u003e\n\u003cp\u003eThe supplied heating cable connects to your vehicle’s original steering heater circuit; the wheel retains heating only if your Tesla came with factory steering wheel heating. If your car lacks the original heating hardware, the heating capability won’t be available.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes heating cable for integration with original heated steering systems\u003c\/li\u003e\n  \u003cli\u003eCompatible with Model 3 (2017–2023) and Model Y (2019–2024) when original heating is present\u003c\/li\u003e\n  \u003cli\u003eProfessional wiring recommended to ensure correct heater operation and safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this JIANGGAI yoke fit my Tesla and what’s in the box?\u003c\/h3\u003e\n\u003cp\u003eThe yoke is engineered specifically for Tesla Model 3 and Model Y model years listed and aligns with factory mounting points, but it does not include the center trim, horn\/buttons or airbag components. The product ships with the steering wheel and a heating cable only.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: Tesla Model 3 (2017–2023) and Model Y (2019–2024)\u003c\/li\u003e\n  \u003cli\u003eIncluded: JIANGGAI yoke wheel and heating cable\u003c\/li\u003e\n  \u003cli\u003eExcluded: front trim, buttons, and airbag—seek professional installer for reassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I handle installation and aftercare?\u003c\/h3\u003e\n\u003cp\u003eBecause the product replaces critical steering components and interfaces with the heating circuit, professional installation by a qualified technician is recommended. After installation, treat the microfiber leather with mild cleaners and avoid harsh chemicals to preserve texture and stitching.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional installation recommended for safety and correct wiring\u003c\/li\u003e\n  \u003cli\u003eUse water-based cleaners and soft cloths to maintain the leather surface\u003c\/li\u003e\n  \u003cli\u003eJIANGGAI provides a one-year manufacturer service for defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The JIANGGAI Yoke Racing Steering Wheel suits Tesla owners who want a modern, track-inspired interior update and who already have (or plan to maintain) the factory steering heating option. It’s ideal for drivers who prioritize improved visibility, a sportier cabin vibe, and a durable microfiber leather finish. If you require center buttons, trim, or airbag components with your purchase, plan to source those parts separately and book a professional installer to ensure safe, compliant setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this yoke keep the heated steering function?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, heating works if your Tesla originally had steering wheel heating; the kit includes a heating cable for integration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are buttons and airbag included with the wheel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The package contains the wheel and heating cable only; buttons, trim, and airbag must be sourced separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JIANGGAI","offers":[{"title":"Default Title","offer_id":67585063616697,"sku":"B0D1MG99GP","price":309.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jianggai-yoke-front-view.jpg?v=1790465752"},{"product_id":"dorman-power-steering-assist-motor-module-905-050-direct-fit-for-gm-compact-cars-factory-connector","title":"Dorman Power Steering Assist Motor\/Module 905-050 — Direct-Fit for GM Compact Cars, Factory Connector","description":"\u003cb\u003eDorman 905-050 is a direct-fit replacement power steering assist motor\/module engineered to restore electric steering assist on compatible GM compact vehicles.\u003c\/b\u003e\n\n\u003cp\u003eIf the electric power steering in your Chevrolet, Pontiac or Saturn is failing because the original assist motor or module has stopped functioning, this Dorman unit provides a ready-made repair that matches factory fit and function. It replaces the failed component that controls the electric assist, helping return steering effort and responsiveness to expected levels without needing a full rack replacement.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this module restore steering assist?\u003c\/h3\u003e\n\u003cp\u003eThe Dorman 905-050 replaces the factory assist motor and module assembly that supplies and controls electric torque to the steering system. By matching mechanical mounting points and electrical connections, it reestablishes the flow of assist commands between vehicle electronics and the steering gear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for bolt-up installation into specified models\u003c\/li\u003e\n  \u003cli\u003eFactory-style electrical connector compatibility to avoid splicing\u003c\/li\u003e\n  \u003cli\u003eRe-engineered internal components to drive the steering assist motor\u003c\/li\u003e\n  \u003cli\u003eRestores steering effort and feel close to original specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles will this Dorman unit fit?\u003c\/h3\u003e\n\u003cp\u003eThis part is intended for a range of GM small cars from the 2000s and early 2010s; always confirm fitment using the vehicle lookup tool before ordering. Specific model years covered include multiple Chevrolet, Pontiac and Saturn vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet Cobalt: model years 2005–2010\u003c\/li\u003e\n  \u003cli\u003eChevrolet HHR: model years 2006–2011\u003c\/li\u003e\n  \u003cli\u003ePontiac G5: model years 2007–2010\u003c\/li\u003e\n  \u003cli\u003eAdditional coverage: Pontiac Pursuit (2005–2006), Saturn Ion (2003–2007)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and durability?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the original module's mounting locations and electrical interfaces, so it generally uses the same fasteners and wiring harness. The assembly is built from robust materials to provide long-term service when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses factory-style mounting points for straightforward replacement\u003c\/li\u003e\n  \u003cli\u003eDurable construction aimed at extended service life under normal conditions\u003c\/li\u003e\n  \u003cli\u003eDesigned and tested by product specialists with U.S. support available\u003c\/li\u003e\n  \u003cli\u003eCheck the garage tool for any special fitment notes or verification steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any pre-purchase checks I should do?\u003c\/h3\u003e\n\u003cp\u003eBefore buying, enter your vehicle details into the site’s garage or fitment checker and review any callouts. Some vehicles may display an information icon that calls for extra verification to ensure the module’s compatibility with particular trims or options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the Confirmed Fit bar after selecting your vehicle trim\u003c\/li\u003e\n  \u003cli\u003eHover over the blue information icon if present for fitment notes\u003c\/li\u003e\n  \u003cli\u003eConfirm connector type and mounting orientation against your existing part\u003c\/li\u003e\n  \u003cli\u003eCompare part numbers or consult a technician when unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technically minded DIYers, independent repair shops and fleet managers replacing failed electric steering assist modules on supported Chevrolet, Pontiac and Saturn compact cars will find this Dorman 905-050 useful. It’s intended for situations where the original module has experienced internal failure and a direct replacement is preferred over more invasive repairs. If you need a like-for-like replacement that keeps vehicle wiring and mounting intact while restoring electric assist, this unit is aimed at those goals. Always confirm fitment for your exact trim and year before purchase and follow manufacturer or shop procedures for safe installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures summary:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement built to match factory fit and function\u003c\/li\u003e\n  \u003cli\u003eEngineered to restore proper electric steering assist after internal module failure\u003c\/li\u003e\n  \u003cli\u003eConstructed with durable materials for reliable service life\u003c\/li\u003e\n  \u003cli\u003eBacked by experienced product support and decades of automotive expertise\u003c\/li\u003e\n  \u003cli\u003eUse the vehicle lookup\/garage tool and Confirmed Fit bar before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this module fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Enter your year\/trim in the garage tool and check the Confirmed Fit bar; hover over any blue \"i\" for notes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace the entire steering rack?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This replaces the electric assist motor\/module assembly, not the full steering rack.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":67585075249337,"sku":"B0G3ZLY5K5","price":226.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dorman-905-050-front-assembly.jpg?v=1790466183"},{"product_id":"a-premium-power-steering-pump-for-nissan-v6-3-5l-pulley-bracket-new-assembly","title":"A-Premium Power Steering Pump for Nissan V6 3.5L — Pulley \u0026 Bracket, New Assembly","description":"\u003cb\u003eA-Premium Power Steering Pump with pulley and bracket replaces worn units on compatible Nissan V6 3.5L models to restore smoother, quieter steering response.\u003c\/b\u003e\n\n\u003cp\u003eThis complete power steering pump assembly includes the pulley and mounting bracket and is built as a brand-new replacement for Nissan Altima (2007–2012), Maxima (2009–2014) and Murano (2009–2014) V6 3.5L vehicles. It installs in place of the factory pump to address common hydraulic steering issues such as fluid leaks, whining or squealing noises, intermittent power assist, and metal contamination in the fluid. The unit ships without a reservoir, uses a hose-barb inlet and a threaded outlet, and carries a one-year unlimited-mileage warranty from A-Premium.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this pump affect steering feel and noise?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failing pump with this A-Premium assembly typically reduces whining, squealing, and jerky or heavy steering by restoring proper hydraulic pressure and flow. The included pulley ensures correct belt alignment, which helps prevent vibration-related noise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores hydraulic pressure for smoother steering input\u003c\/li\u003e\n  \u003cli\u003ePulley corrects belt tracking to minimize vibration noise\u003c\/li\u003e\n  \u003cli\u003eNew internal vanes reduce metal debris circulation\u003c\/li\u003e\n  \u003cli\u003eThreaded outlet and hose-barb inlet match factory hose connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Nissan Altima, Maxima, or Murano?\u003c\/h3\u003e\n\u003cp\u003eThis pump is made to fit Nissan Altima 2007–2012 V6 3.5L, Maxima 2009–2014 V6 3.5L, and Murano 2009–2014 V6 3.5L. Cross-reference the listed reference numbers with your OEM part to ensure exact matching before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Altima, Maxima, Murano with 3.5L V6 engines\u003c\/li\u003e\n  \u003cli\u003eReference numbers include 49110-1AA0A, 49110-JA100, 49110-ZX70A and more\u003c\/li\u003e\n  \u003cli\u003eCheck OEM part and mounting orientation for final confirmation\u003c\/li\u003e\n  \u003cli\u003eDesigned as a direct replacement (not remanufactured)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and specification details I should know?\u003c\/h3\u003e\n\u003cp\u003eThe assembly arrives brand-new and includes the pump, pulley, and mounting bracket but not a reservoir. It uses a hose-barb inlet and a threaded outlet to mate with factory hose fittings; standard hand tools and a basic understanding of power-steering systems are recommended for installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCondition: brand new, with pulley and bracket; no reservoir included\u003c\/li\u003e\n  \u003cli\u003eInlet: hose barb; Outlet: threaded for OEM hose attachments\u003c\/li\u003e\n  \u003cli\u003eComes with a 1-year (12 months) unlimited-mileage warranty\u003c\/li\u003e\n  \u003cli\u003eProfessional installation advised if you lack hydraulic system experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the warranty and reliability compare to remanufactured units?\u003c\/h3\u003e\n\u003cp\u003eA-Premium supplies a one-year unlimited-mileage guarantee on this new pump, providing assurance against premature failure and manufacturing defects. Because this is a brand-new assembly rather than a remanufactured part, it avoids the variability that can come from previously used cores.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1-year unlimited-mileage manufacturer warranty included\u003c\/li\u003e\n  \u003cli\u003eBrand-new components reduce risk of residual wear issues\u003c\/li\u003e\n  \u003cli\u003eQuality checks performed to meet fit and function expectations\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for warranty claims and fitment questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The A-Premium Power Steering Pump with Pulley \u0026amp; Bracket is intended for owners or technicians maintaining Nissan Altima, Maxima, and Murano vehicles with the 3.5L V6 engine who need a direct, brand-new replacement for a failing steering pump. It’s a good choice if you’re addressing leaks, noise, erratic steering assist, or contamination in the steering fluid and you want a covered, ready-to-install assembly that matches common OEM reference numbers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump include the power steering reservoir?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this assembly includes the pump, pulley, and bracket only; the reservoir is not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What Nissan models and years does this fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Altima 2007–2012, Maxima 2009–2014, and Murano 2009–2014 with the 3.5L V6—verify OEM reference numbers before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67585079017657,"sku":"B082SGWCDF","price":204.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-power-steering-pump-front-view_b9d2e606-0a20-4a43-a810-80111331bf79.jpg?v=1790466354"},{"product_id":"a-premium-power-steering-pump-for-gm-trucks-hummer-no-pulley-integrated-reservoir-dual-return-hose","title":"A-Premium Power Steering Pump for GM Trucks \u0026 Hummer (No Pulley) — Integrated Reservoir \u0026 Dual Return Hose","description":"\u003cstrong\u003eA-Premium Power Steering Pump with integrated reservoir and dual return hose is a brand-new, non-remanufactured replacement engineered to restore hydraulic assist on compatible GM trucks and Hummer models.\u003c\/strong\u003e\n\nThis complete pump assembly arrives without a pulley and includes a built-in reservoir plus a dual return hose configuration so you get a ready-to-install unit for many Chevrolet, GMC and Hummer vehicles. Designed to match OE-style mounting and fluid connections, the part accepts hose-barb inlet lines and threaded outlet fittings. It ships with a 12-month warranty and a long list of application years and reference numbers to help ensure you select the correct fit.\n\n\u003ch3\u003eWhich vehicles will this power steering pump fit?\u003c\/h3\u003e\n\u003cp\u003eThe pump fits a wide range of GM light-duty and heavy-duty trucks, SUVs and Hummer models across multiple model years. Use the provided reference numbers to cross-check compatibility with your vehicle’s service manual or parts diagram before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet models: Silverado, Avalanche, Tahoe, Suburban, C\/K series (various years from 1996–2017).\u003c\/li\u003e\n  \u003cli\u003eGMC models: Sierra, Yukon, C\/K series, Suburban (select years 1996–2017).\u003c\/li\u003e\n  \u003cli\u003eHummer models: H1 (AM General) 1996–1998 and H2 2003–2007 compatible variants.\u003c\/li\u003e\n  \u003cli\u003eCross-reference numbers: 20-8739, 208739, 15076613, 15909826 and others listed with the part.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical details and included components?\u003c\/h3\u003e\n\u003cp\u003eThis listing is for a brand-new pump assembly that comes without a pulley and includes an integrated reservoir. Fluid connections follow common OE styles to simplify hose attachment and threaded outlet hook-up.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCondition: Brand new (not remanufactured).\u003c\/li\u003e\n  \u003cli\u003eReservoir: Integrated; inlet uses hose-barb style connection.\u003c\/li\u003e\n  \u003cli\u003eOutlet: Threaded attachment for secure connection to steering lines.\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year (12 months) limited coverage from purchase date.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and fitment work for DIY or professional shops?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard power-steering replacement steps: remove the old pump, transfer any reusable hardware or brackets if needed, connect the hose-barb inlet and threaded outlet, then fill and bleed the system. Because the pump lacks a pulley, you’ll reuse your existing pulley or obtain the correct pulley for your engine and belt setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreparation: Verify engine bay clearance and mounting bracket alignment before beginning.\u003c\/li\u003e\n  \u003cli\u003ePulley: Existing pulley must be transferred or ordered separately—this unit ships without one.\u003c\/li\u003e\n  \u003cli\u003eBleeding: Proper bleeding of the system is required to remove air and prevent noise or reduced assist.\u003c\/li\u003e\n  \u003cli\u003eProfessional help: Recommended if you’re unsure about pulley installation, torque specs, or hydraulic fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering to avoid returns?\u003c\/h3\u003e\n\u003cp\u003eConfirm your vehicle’s year, make, model and engine type against the compatibility list and the reference part numbers. Inspect your current pump’s inlet and outlet fittings to ensure they match the hose-barb and threaded connections on this assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch reference numbers listed with your OEM part or dealer printout.\u003c\/li\u003e\n  \u003cli\u003eVerify whether your setup requires a pulley transfer or a new pulley altogether.\u003c\/li\u003e\n  \u003cli\u003eCompare mounting points and bracket orientation with photos or diagrams.\u003c\/li\u003e\n  \u003cli\u003eConfirm desired warranty coverage and return policy details before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\u003cp\u003eThis A-Premium power steering pump assembly is intended for owners and mechanics working on compatible Chevrolet, GMC and Hummer vehicles who need a complete reservoir-equipped replacement unit. It suits do-it-yourself mechanics comfortable with hydraulic bleeding and pulley installation, as well as repair shops seeking a direct-fit, warrantied aftermarket option for older GM trucks and SUVs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump include a pulley?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the pump ships without a pulley; you must reuse your original pulley or buy a compatible pulley separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with my 2003 Hummer H2?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the pump lists compatibility with Hummer H2 models from 2003–2007; verify reference numbers for exact fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67585084686521,"sku":"B088BLMLPF","price":234.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-front-assembly_806b9276-027c-49d0-9b10-247d003a9b35.jpg?v=1790466636"},{"product_id":"fexon-power-steering-pump-with-pulley-direct-fit-replacement-for-ford-mercury-f09z3a674a-aluminum-alloy-cast-iron","title":"FEXON Power Steering Pump with Pulley - Direct-Fit Replacement for Ford\/Mercury F09Z3A674A, Aluminum Alloy \u0026 Cast Iron","description":"\u003cp\u003e\u003cstrong\u003eFEXON Power Steering Pump with Pulley is a direct-fit replacement pump designed to restore hydraulic steering assist for specified Ford and Mercury V6 models that originally used part F09Z3A674A.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle is showing heavier steering, whining from the engine bay, or fluid leaks around the pump area, a worn power steering pump can be the cause. This FEXON assembly includes the pump and pulley, built from aluminum alloy and cast iron parts, and is engineered to meet OEM form, fit, and function for a range of Ford and Mercury applications. It replaces several OE numbers and is tested during production to help ensure dependable operation when installed.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this pump fit?\u003c\/h3\u003e\n\n\u003cp\u003eThis pump is compatible with multiple Ford and Mercury V6 platforms from the 1990s and early 2000s. Always cross-check your original part number or consult fitment guides before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord Aerostar 1990–1997 V6 3.0L and 4.0L\u003c\/li\u003e\n  \u003cli\u003eFord Explorer 1995–2000 V6 4.0L\u003c\/li\u003e\n  \u003cli\u003eFord Ranger 1998–2006 V6 3.0L\u003c\/li\u003e\n  \u003cli\u003eFord Taurus 1990–1995 V6 3.8L; Windstar 1995–2000 V6 3.0L\u003c\/li\u003e\n  \u003cli\u003eMercury Sable 1993–1995 V6 3.0L; Sable 1990–1995 V6 3.8L\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers including 20-7271, 207271, F09Z3A674A and related variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the FEXON pump perform compared with the original equipment unit?\u003c\/h3\u003e\n\n\u003cp\u003eThe pump is manufactured with corrosion-resistant aluminum alloy and durable cast iron components to match the strength and thermal stability of many OEM pumps. During production each unit undergoes testing to verify hydraulic output and mechanical integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy housing for corrosion resistance and heat tolerance\u003c\/li\u003e\n  \u003cli\u003eCast iron internal components for wear resistance under load\u003c\/li\u003e\n  \u003cli\u003eProduction testing to confirm proper pressure and leak-free assembly\u003c\/li\u003e\n  \u003cli\u003eDesigned as a direct replacement for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what should I expect at installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe package contains the power steering pump and matching pulley so you receive a ready-to-install assembly. Installation is intended to be a direct replacement of the factory unit, but it's recommended to inspect hoses, brackets, and fluid condition while replacing the pump.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 x power steering pump and 1 x pulley\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design to align with original mounting points and serpentine\/belt interface\u003c\/li\u003e\n  \u003cli\u003eCheck hoses and power steering fluid when fitting to avoid rework\u003c\/li\u003e\n  \u003cli\u003eBleeding the steering system after installation ensures proper assist and reduces noise\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this pump match my vehicle's part number and standards?\u003c\/h3\u003e\n\n\u003cp\u003eThe FEXON pump is intended to replace a range of OE numbers and variants used across multiple Ford and Mercury models. It’s produced to meet OEM-style specifications for fit and performance, but you should verify cross-reference numbers for 100% compatibility with your car.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-replaces F09Z3A674A and related OE numbers listed by manufacturers\u003c\/li\u003e\n  \u003cli\u003eMeets OEM-style dimensional and hydraulic requirements\u003c\/li\u003e\n  \u003cli\u003eManufactured with quality materials to provide long-term service life\u003c\/li\u003e\n  \u003cli\u003eRecommended to confirm fit with your vehicle VIN or original part number\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This FEXON power steering pump with pulley is intended for vehicle owners, DIY mechanics, and independent repair shops servicing compatible Ford and Mercury V6 models from the 1990s and early 2000s. It’s suited to anyone needing a reliable, tested replacement that restores hydraulic assist and aligns with original mounting and pulley specifications. If you’re unsure about fitment, check your OE part number or consult a parts professional before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump include the pulley?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains one power steering pump and one matching pulley for direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which OE numbers does this replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces F09Z3A674A and related numbers such as 20-7271, 207271, and several OEM variants.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FEXON","offers":[{"title":"Default Title","offer_id":67585085276345,"sku":"B0FS6PPQV8","price":196.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fexon-front-view-pump-with-pulley.jpg?v=1790466677"},{"product_id":"ghmarine-transom-bellows-kit-for-mercruiser-bravo-i-ii-iii-8m0095485-complete-bellows-gimbal-bearing-1988","title":"GHmarine Transom Bellows Kit for MerCruiser Bravo I\/II\/III – 8M0095485 Complete Bellows \u0026 Gimbal Bearing (1988+)","description":"\u003cp\u003e\u003cstrong\u003eComplete transom bellows kit with gimbal bearing engineered to replace worn MerCruiser Bravo I\/II\/III and compatible stern drive components for secure exhaust, shift and water connections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you operate a boat with a MerCruiser Bravo I, II or III stern drive (1988 and later) or a compatible Blackhawk model, keeping the transom bellows and gimbal bearing in good shape is essential to prevent water intrusion and ensure proper alignment of the outdrive. The GHmarine 8M0095485 kit includes the main bellows and all related seals, hoses and clamps needed for a full transom service so you can restore a watertight, properly supported drive assembly.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and serial ranges does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed for MerCruiser Bravo I, II and III stern drives from 1988 onward with serials starting at 0B664190 and up. It also fits specified MerCruiser Blackhawk models from 1994–1995 with serials starting at 0D469859 and up. Always verify your drive's part or serial number before ordering to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovers Bravo I\/II\/III 1988 \u0026amp; up (serials 0B664190+)\u003c\/li\u003e\n  \u003cli\u003eCompatible with Blackhawk 1994–1995 (serials 0D469859+)\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part numbers such as 30-803100T1, 8M0095485 and equivalents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included in the transom kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies the complete hardware needed for a typical transom bellows replacement, letting you avoid piecemeal shopping and reducing installation time. Components are selected to match the layout of Bravo-style drives so you can rebuild the exhaust, shift coupling and gimbal seal areas in one service session.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eU-joint bellows and exhaust bellows for watertight seals\u003c\/li\u003e\n  \u003cli\u003eExhaust tube, shift cable bellows and water intake hose\u003c\/li\u003e\n  \u003cli\u003eGimbal bearing, bellows clamps\/clips and outdrive gasket set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing the bellows and gimbal bearing help the boat?\u003c\/h3\u003e\n\u003cp\u003eNew bellows and a fresh gimbal bearing restore the drive’s sealing and support functions, lowering the risk of stern leaks and misalignment that can damage the outdrive. A properly sealed transom prevents water ingress while the bearing maintains correct drive angle and reduces vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents water entry through worn or cracked bellows\u003c\/li\u003e\n  \u003cli\u003eImproves outdrive alignment and reduces drivetrain stress\u003c\/li\u003e\n  \u003cli\u003eIncludes clamps and gaskets for a complete, sealed installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this kit replace other manufacturer part numbers?\u003c\/h3\u003e\n\u003cp\u003eYes — the GHmarine kit is made as a repair equivalent to several OEM numbers and aftermarket references, letting it serve as a direct replacement in many service situations. Check the part identifiers on your current components to ensure a match before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInterchanges with MerCruiser, Sierra and Mallory reference numbers\u003c\/li\u003e\n  \u003cli\u003eUseful when OEM originals are out of stock or obsolete\u003c\/li\u003e\n  \u003cli\u003eIncludes all primary sealing and mounting parts for straightforward swap-out\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This GHmarine transom bellows kit is for boat owners, mechanics and marine service shops who maintain MerCruiser Bravo-style stern drives or compatible Blackhawk models. It’s aimed at people performing transom seal replacements, gimbal bearing services, or full outdrive reseals who want a complete parts set that matches common OEM references and simplifies the repair process.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include the gimbal bearing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit contains a gimbal bearing along with bellows, clamps, hoses and gaskets for a full transom service.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this fits my drive?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compare your drive’s serial and part numbers to the kit’s listed ranges and OEM equivalents before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GHmarine","offers":[{"title":"Default Title","offer_id":67585090715833,"sku":"B07Q4X2118","price":186.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ghmarine-bellows-kit-front-packaging.jpg?v=1790466986"},{"product_id":"atracypart-power-steering-pump-w-pulley-direct-fit-for-honda-acura-2-0l-2-4l-aluminum-housing-quiet-operation","title":"ATRACYPART Power Steering Pump w\/ Pulley — Direct-fit for Honda\/Acura 2.0L–2.4L, Aluminum Housing \u0026 Quiet Operation","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART power steering pump with pre-installed pulley — a direct-fit replacement that restores consistent hydraulic assist for compatible Honda and Acura 4-cylinder models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis complete pump assembly is engineered to match original equipment fitment for select Honda and Acura vehicles (2.0L, 2.3L, 2.4L engines). It combines a corrosion-resistant aluminum housing, heat-treated iron internals, and factory-style sealing to deliver steady pressure, quieter operation, and long service life. The unit ships with the pulley already installed to cut installation time and avoid pulley transfer errors.\u003c\/p\u003e\n\n\u003ch3\u003eWill this pump fit my Honda or Acura model?\u003c\/h3\u003e\n\u003cp\u003eCheck the vehicle years and engine sizes carefully: this pump is compatible with specific 4-cylinder CR-V, Accord, Element, RSX, TSX, and RDX models listed in the fitment table. It replaces a variety of OEM part numbers, making it straightforward to confirm compatibility using your old part number.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: CR-V 2005–2011 (2.4L), Accord 2006–2007 (2.4L), Element 2006–2011 (2.4L).\u003c\/li\u003e\n  \u003cli\u003eAlso fits Acura RSX 2002–2006 (2.0L), TSX 2006–2008 (2.4L), RDX 2007–2012 (2.4L).\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 3.0L V6 or other non-listed engines—verify engine code and your old part number.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eThe pump arrives as a ready-to-bolt-on assembly with the pulley pre-attached, which reduces labor and eliminates pulley alignment steps. Basic mechanical skills and common hand tools are sufficient; professional installation is recommended if you're not comfortable working with hydraulic systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes: 1 power steering pump with pulley pre-installed.\u003c\/li\u003e\n  \u003cli\u003eReservoir, hoses, and belts are not included—reuse OEM parts or purchase separately.\u003c\/li\u003e\n  \u003cli\u003eRecommended procedure: flush old fluid and properly bleed air from the system after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability features does this pump offer?\u003c\/h3\u003e\n\u003cp\u003eBuilt with an aluminum outer casing and hardened iron internal components, the assembly resists corrosion and handles sustained hydraulic loads. Precision seals and tight machining reduce the chance of leaks and help dampen operational noise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium aluminum housing for heat and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated internals designed for consistent pressure delivery.\u003c\/li\u003e\n  \u003cli\u003ePre-installed pulley minimizes installation error and misalignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill replacing the pump fix steering noise or leaks?\u003c\/h3\u003e\n\u003cp\u003eIf steering noise or loss of assist is caused by a failing pump, this replacement often restores normal system behavior. However, diagnose hoses, fluid condition, belt tension, and reservoir integrity as issues can stem from multiple components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelps eliminate whining, hard steering, and low-pressure symptoms when pump-related.\u003c\/li\u003e\n  \u003cli\u003ePerform fluid flush and system bleed to avoid air-induced noise.\u003c\/li\u003e\n  \u003cli\u003eInspect hoses and fittings for leaks before and after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: technicians, fleet managers, and DIY mechanics who need a reliable OE-style replacement pump for compatible Honda and Acura 4-cylinder vehicles. It’s suited to restorations, routine steering system overhauls, and owners who require a ready-to-install assembly backed by a 2-year warranty. Always confirm fitment by cross-referencing your original part number and vehicle engine code before purchase.\u003c\/p\u003e\n\n\u003cp\u003eFeatures: 2-year warranty, direct-fit assembly with pulley, aluminum housing, heat-treated internals, designed for consistent hydraulic assist in parking maneuvers, low-speed turns and highway driving. Contact ATRACYPART support for fitment questions or warranty assistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump fit a 3.0L V6 Accord?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This pump is made for 2.0L, 2.3L, and 2.4L 4-cylinder engines only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the reservoir included with the pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The listing contains the pump with pulley only; reservoir and hoses are sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":67585092944057,"sku":"B0FG7VLRVN","price":198.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/atracypart-front-assembly-pump-pulley.jpg?v=1790467090"},{"product_id":"9-99world-mall-steering-gear-box-assembly-for-yamaha-drive-g29-g22-direct-fit-alloy-steel-restores-precise-steering","title":"9.99WORLD MALL Steering Gear Box Assembly for Yamaha Drive G29\/G22 — Direct-Fit Alloy Steel, Restores Precise Steering","description":"\u003cb\u003eHigh-strength steering gear box assembly engineered to restore precise steering for Yamaha Drive G29 and G22 golf carts.\u003c\/b\u003e\n\n\u003cp\u003eIf your Yamaha Drive G29 or G22 is showing sloppy steering, vibration, or excessive play at the wheel, this complete steering gear box assembly from 9.99WORLD MALL is built to bring factory-level control back to your cart. Designed for both gas and electric variants of the Yamaha Drive series, this unit replaces worn internal gears and mounts, giving you smoother direction changes and improved on-course confidence.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes this steering gear box compatible with my Yamaha Drive G29 or G22?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is specifically designed to match the mounting points, input shaft, and output link geometry of Yamaha Drive G29 and G22 models. That ensures bolt-on installation without the need for custom modifications for most owners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for Yamaha Drive G29 and G22 frames and steering linkages.\u003c\/li\u003e\n  \u003cli\u003eInput shaft and spline patterns matched to OEM specifications.\u003c\/li\u003e\n  \u003cli\u003eIncludes all required hardware to replace the original unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the construction and how will it affect longevity?\u003c\/h3\u003e\n\u003cp\u003eThe assembly combines high-grade alloy steel with aluminum components to balance strength and resistance to wear while keeping weight manageable. Hardened internal gears and corrosion-resistant surfaces reduce the rate of mechanical degradation compared with economy replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel gearing for enhanced load-bearing capacity.\u003c\/li\u003e\n  \u003cli\u003eAluminum housing sections to resist rust and reduce mass.\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined surfaces for consistent gear engagement and less noise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how hard is installation?\u003c\/h3\u003e\n\u003cp\u003eYou receive a full steering gear box assembly plus all installation hardware and a detailed manual, so you can complete the swap in a single session. Basic mechanical skills and common tools are typically all that’s required; professional installation is optional if you prefer certified service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete steering gear box preassembled for convenience.\u003c\/li\u003e\n  \u003cli\u003eMounting bolts, bushings, and linkage fasteners included.\u003c\/li\u003e\n  \u003cli\u003eStep-by-step installation guide to reduce guesswork and downtime.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this improve steering feel and vehicle safety?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn steering gear box restores tighter steering response and reduces excessive play that can affect handling. Improved gear engagement helps maintain directional stability and more predictable cornering, contributing to safer operation on paths and courses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduced steering play for more accurate turns and alignment retention.\u003c\/li\u003e\n  \u003cli\u003eSmoother input-to-wheel response reduces driver corrections.\u003c\/li\u003e\n  \u003cli\u003eSturdy construction minimizes sudden failure risk under normal use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This steering gear box assembly is intended for Yamaha Drive G29 and G22 owners—both gas and electric—who want a reliable, long-lasting replacement for worn steering components. It suits do-it-yourself mechanics comfortable with mechanical swaps, fleet managers maintaining multiple carts, and golf course operators seeking to reduce downtime. If you value restored steering precision and a complete kit with clear instructions, this unit delivers the parts and support needed to get your cart back to proper handling quickly.\u003c\/p\u003e\n\n\u003cp\u003eCustomer support: 9.99WORLD MALL stands behind the product; if you need help during installation or have questions about fitment, reach out to our support team for step-by-step assistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this steering gear box a direct replacement for Yamaha G29?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It's engineered as a direct-fit replacement for Yamaha Drive G29 and G22 steering systems with included mounting hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most mechanically skilled DIYers can install it using basic tools and the provided manual; professional help is optional.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"9.99WORLD MALL","offers":[{"title":"Default Title","offer_id":67585094320313,"sku":"B073TR495T","price":179.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/9.99world-mall-front-view-steering-gear-box.jpg?v=1790467171"},{"product_id":"rough-country-n3-steering-stabilizer-for-1976-1986-jeep-cj7-4wd-direct-fit-heavy-duty-damping","title":"Rough Country N3 Steering Stabilizer for 1976–1986 Jeep CJ7 4WD — Direct-Fit, Heavy-Duty Damping","description":"\u003cp\u003e\u003cstrong\u003eRough Country's N3 steering stabilizer for 1976–1986 Jeep CJ7 4WD reduces steering wander and vibration to deliver steadier control on pavement and off-road trails.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Rough Country N3 Steering Stabilizer (part 8734530) is a direct-fit upgrade engineered for classic Jeep CJ7 4WDs built from 1976 to 1986. Designed to work with factory and lifted steering geometries, the unit helps tame kickback and irregular steering inputs without complex modifications. It bolts on to existing mounting points and is supported by Rough Country’s limited lifetime replacement warranty for added peace of mind.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this stabilizer improve steering feel?\u003c\/h3\u003e\n\u003cp\u003eThis stabilizer absorbs sudden inputs and damping feedback from rough surfaces so your steering feels more controlled and predictable. It reduces the jarring sensations that come through the wheel while maintaining responsive steering for normal driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePatented damping design to smooth steering oscillations\u003c\/li\u003e\n  \u003cli\u003eReduces bump steer and wheel hop on uneven terrain\u003c\/li\u003e\n  \u003cli\u003eMaintains steering responsiveness at highway speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my 1976–1986 Jeep CJ7 without extra fabrication?\u003c\/h3\u003e\n\u003cp\u003eYes — this part is engineered as a bolt-on replacement for 1976–1986 CJ7 4WD models, so no custom brackets are required for typical installations. It uses the vehicle’s existing mounting locations and includes hardware for a straightforward swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit for stock and many lifted CJ7 setups\u003c\/li\u003e\n  \u003cli\u003eIncludes installation hardware supported by Rough Country\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on process with common hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and protection features does it offer?\u003c\/h3\u003e\n\u003cp\u003eThe N3 stabilizer is built with rugged materials and finishes intended to tolerate road grime, water, and trail debris. Its construction focuses on long life to help protect steering components and tires by reducing repetitive stress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty housing and sealed internals for longevity\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish suitable for off-road use\u003c\/li\u003e\n  \u003cli\u003eHelps extend life of tie rods, ball joints, and tires by reducing vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be user-friendly: the unit bolts into factory mounting points and is accompanied by Rough Country installation guidance. Expect basic hand tools and a moderate amount of time if you’re working in a home garage; professional installation is an option if you prefer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic tools required: sockets, wrenches, torque wrench\u003c\/li\u003e\n  \u003cli\u003eTypical install time: 1–2 hours for an experienced DIYer\u003c\/li\u003e\n  \u003cli\u003eInstallation support available from Rough Country if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Rough Country N3 Steering Stabilizer is ideal for Jeep CJ7 owners (1976–1986) who want a bolt-on solution to reduce steering shake, bump steer, and trail feedback. It suits daily-driven CJ7s, weekend off-road rigs, and lightly lifted builds where improved steering control and component longevity are priorities. If you want a durable, straightforward stabilizer backed by a limited lifetime replacement warranty, this part is a practical upgrade for classic CJ7 steering systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this steering stabilizer a direct fit for all 1976–1986 CJ7 4WD models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is designed as a bolt-on replacement for 1976–1986 Jeep CJ7 4WDs and uses factory mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the stabilizer require special tools or professional installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools are typically sufficient; experienced DIYers can install it in 1–2 hours, though professional installation is optional.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67585097597113,"sku":"B07DPF9BSC","price":179.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-n3-steering-stabilizer-front-view.jpg?v=1790467288"},{"product_id":"lyxinarhy-power-steering-pump-with-pulley-21-5419-fits-honda-cr-v-2005-2011-pulley-included-oe-match","title":"Lyxinarhy Power Steering Pump with Pulley 21-5419 — Fits Honda CR-V 2005-2011, Pulley Included, OE Match","description":"\u003cp\u003e\u003cstrong\u003eLyxinarhy Power Steering Pump with Pulley 21-5419 is a direct-replacement steering pump designed to restore smooth, quiet power steering on compatible Honda and Acura models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your steering wheel feels heavy, grinds, or makes unusual noises while turning, replacing the pump can bring back predictable steering behavior. This assembly (part number 21-5419) includes the pulley and matches multiple OE references—offering an economical, tested alternative to factory units for select Honda and Acura 2.4L and 2.0L vehicles from the early 2000s through 2011.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this pump improve steering performance?\u003c\/h3\u003e\n\u003cp\u003eInstalling a new Lyxinarhy pump reduces steering effort and reduces the noisy or jerky response caused by a failing unit. The replacement is engineered to meet fit, form, and function expectations so steering returns to a stable feel without custom modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores hydraulic pressure for smoother turns and reduced steering wheel resistance.\u003c\/li\u003e\n  \u003cli\u003ePrecision-balanced pulley to minimize vibration and accessory belt wear.\u003c\/li\u003e\n  \u003cli\u003eTested materials for consistent performance under normal driving loads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and OE numbers does part 21-5419 match?\u003c\/h3\u003e\n\u003cp\u003eThis pump is compatible with a range of Honda and Acura applications that used similar steering assemblies. Check your vehicle’s model year and OE reference to ensure correct fitment before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include Honda CR-V (2005–2011), Accord and Element in select years, plus Acura RSX and TSX variations.\u003c\/li\u003e\n  \u003cli\u003eCross-references: 56110-PNB-A01, 56110-PND-J01, 56110-RBB-E02, 56110-PZD-A02, and related OE numbers.\u003c\/li\u003e\n  \u003cli\u003eConfirm compatibility via your VIN or the listed OE numbers to avoid returns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and durability features?\u003c\/h3\u003e\n\u003cp\u003eThe Lyxinarhy pump is manufactured from quality materials and undergoes multiple tests to ensure durability and reliable operation. While it’s not an OEM-branded unit, it’s produced to meet common aftermarket standards for longevity and consistent hydraulic output.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust housing and internal components designed for typical driving stress and heat cycles.\u003c\/li\u003e\n  \u003cli\u003eIncludes the pulley assembled to factory-style specifications to maintain belt alignment.\u003c\/li\u003e\n  \u003cli\u003eQuality checks performed to reduce the likelihood of leaks, noise, or premature wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know this is the right replacement for my car?\u003c\/h3\u003e\n\u003cp\u003eBefore purchasing, verify the pump’s part number against your current OE number and confirm model-year compatibility. Visual checks of mounting points and pulley alignment also help ensure a straightforward swap without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare part 21-5419 and the listed OE numbers with your current pump label or service manual.\u003c\/li\u003e\n  \u003cli\u003eUse your VIN or online vehicle fitment tools to double-check compatibility.\u003c\/li\u003e\n  \u003cli\u003eInspect the pulley diameter and mounting bolt pattern before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Lyxinarhy Power Steering Pump 21-5419 is intended for DIY mechanics, independent repair shops, and owners of compatible Honda and Acura models who need a reliable, budget-conscious replacement. If your vehicle shows signs of hydraulic steering failure—noise, heavy steering, or intermittent assist—this pump offers a tested aftermarket option. Always confirm compatibility with your OE number and follow professional installation or a trusted mechanic’s guidance for safe, proper fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump fit a 2007 Honda CR-V?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — part 21-5419 covers Honda CR-V model years 2005–2011; verify your OE number to be certain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the pulley included with the pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this assembly ships with the pulley pre-installed for straightforward replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lyxinarhy","offers":[{"title":"Default Title","offer_id":67585106608313,"sku":"B0FW5SJ9DS","price":177.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lyxinarhy-front-view-pump-with-pulley.jpg?v=1790467474"},{"product_id":"bilstein-5100-series-front-steering-damper-for-1999-2004-f250-f350-4wd-46mm-monotube-digressive-valving","title":"Bilstein 5100 Series Front Steering Damper for 1999–2004 F250\/F350 4WD — 46mm Monotube, Digressive Valving","description":"\u003cp\u003e\u003cstrong\u003eBilstein 5100 Series front steering damper is an upgraded monotube unit that reduces steering vibration and improves control for 1999–2004 Ford F250\/F350 Super Duty 4WD trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement steering damper from Bilstein is engineered to be a direct-fit performance upgrade for older Ford Super Duty trucks. Built around a 46mm monotube design with digressive valving, the B8 5100 steering damper targets small, rapid steering movements that can cause vibration and poor feedback. Zinc-coated surfaces help resist corrosion from road salt and grime so the damper maintains consistent operation in demanding conditions. It’s intended to complement the full B8 5100 lineup and to restore steadier steering and improved on-road manners to high-mileage or heavy-use vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this damper reduce steering vibration?\u003c\/h3\u003e\n\u003cp\u003eThe Bilstein 5100 steering damper uses a proven digressive valving system that reacts quickly to varying road inputs. It calms high-frequency movements while still allowing normal steering feel, so bumps and uneven surfaces translate to less steering wobble.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDigressive valving for fast reaction to surface changes\u003c\/li\u003e\n  \u003cli\u003e46mm monotube core for consistent, fade-free damping\u003c\/li\u003e\n  \u003cli\u003eReduces minute steering oscillations without over-stiffening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it bolt on to my 1999–2004 F250\/F350 Super Duty 4WD?\u003c\/h3\u003e\n\u003cp\u003eYes — this Bilstein 5100 front steering damper is designed as a direct-fit replacement for 1999–2004 Ford F250 and F350 Super Duty 4WD models. Installation follows standard steering damper swap procedures and uses factory mounting points, so special modifications are typically unnecessary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit for 1999–2004 F250\/F350 Super Duty 4WD\u003c\/li\u003e\n  \u003cli\u003eZinc coating matches original mounting locations and hardware\u003c\/li\u003e\n  \u003cli\u003eCan be installed with common hand tools in most home garages\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance differences can I expect on- and off-road?\u003c\/h3\u003e\n\u003cp\u003eThe B8 5100 damper balances on-road comfort with off-road reliability: it smooths steering feedback on highway driving while remaining responsive over rougher terrain. You’ll notice fewer small steering corrections and a steadier wheel when towing, hauling, or driving on loose surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmoother steering feel on highways and at speed\u003c\/li\u003e\n  \u003cli\u003eImproved control when towing or carrying heavy loads\u003c\/li\u003e\n  \u003cli\u003eMaintains damping performance under repeated impacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and features ensure longevity?\u003c\/h3\u003e\n\u003cp\u003eBilstein builds the 5100 damper with corrosion-resistant finishes and a robust monotube architecture to withstand real-world use. The zinc coating and durable valving help the unit retain consistent performance through exposure to moisture, road salt, and debris.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eZinc-coated exterior for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eMonotube construction resists fade in extreme conditions\u003c\/li\u003e\n  \u003cli\u003eEngineered to match other B8 5100 series components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Bilstein 5100 front steering damper is aimed at owners of 1999–2004 Ford F250 and F350 Super Duty 4WD trucks who want a reliable, direct-fit upgrade to improve steering stability and reduce vibration. It’s a practical choice for drivers who tow, work in rough terrain, or simply want to restore firmer, more confident steering to a high-mileage truck without complex modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this steering damper a direct fit for my 2001 F250 Super Duty 4WD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Bilstein 5100 front steering damper 24-158848 is a direct-fit replacement for 1999–2004 F250 and F350 Super Duty 4WD models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the damper help when towing or on rough roads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its digressive valving and monotube design reduce steering vibration and improve control when towing or driving on uneven surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67585110999225,"sku":"B009FU7KHM","price":261.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bilstein-5100-front-steering-damper-front-view_jpg.jpg?v=1790467643"},{"product_id":"rough-country-n3-steering-stabilizer-for-1988-2006-chevy-gmc-trucks-suvs-18mm-chrome-hardened-rod-direct-fit","title":"Rough Country N3 Steering Stabilizer for 1988–2006 Chevy\/GMC Trucks \u0026 SUVs — 18mm Chrome-Hardened Rod, Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eThe Rough Country N3 Steering Stabilizer 8732630 is a direct-fit aftermarket damper designed to reduce steering vibration and bump steer on 1988–2006 Chevy and GMC trucks and SUVs while improving on-road tracking.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty steering stabilizer replaces the factory unit with a chrome-hardened 18mm piston rod and upgraded internals to deliver firmer steering feedback and smoother control over uneven surfaces. It’s built for trucks and SUVs from the late 1980s through 2006 that need improved steering response after lift kits, larger tires, or years of wear. Backed by Rough Country’s limited lifetime replacement warranty, the N3 is a practical upgrade for drivers who want better directional stability without changing steering geometry.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the N3 steering stabilizer improve handling on rough roads?\u003c\/h3\u003e\n\u003cp\u003eThe N3 dampens rapid steering inputs and road-induced feedback so your hands feel fewer jolts from ruts, potholes, or oversized tires. This produces steadier tracking at highway speeds and less wandering during off-camber or uneven driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome-hardened 18mm piston rod resists bending and surface wear.\u003c\/li\u003e\n  \u003cli\u003eHydraulic damping reduces kickback and oscillation.\u003c\/li\u003e\n  \u003cli\u003eStiffer internals add predictable resistance for consistent feel.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design preserves factory mounting points for easier installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the Rough Country N3 stop bump steer and extend component life?\u003c\/h3\u003e\n\u003cp\u003eWhile no single part can eliminate bump steer from improper alignment or extreme lift geometry, the N3 reduces the steering vibrations that accelerate wear on tires, tie rods, and ball joints. Many owners see longer life from steering components when vibration and sudden inputs are limited.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDecreases vibration transmitted to steering linkage and front end.\u003c\/li\u003e\n  \u003cli\u003eHelps tires wear more evenly by stabilizing toe changes under load.\u003c\/li\u003e\n  \u003cli\u003eReduces shock loads to ball joints and drag link connectors.\u003c\/li\u003e\n  \u003cli\u003eWorks alongside alignment and correct suspension geometry for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what vehicle fitment does it cover?\u003c\/h3\u003e\n\u003cp\u003eThe N3 is a direct replacement for the OEM stabilizer on 1988–2006 Chevy and GMC trucks and SUVs, designed to use existing mounts and hardware for a straightforward swap. Basic hand tools and a jack are usually all that’s needed; professional installation is recommended if you lack suspension experience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit part number 8732630 for specified Chevy\/GMC models.\u003c\/li\u003e\n  \u003cli\u003eUses factory mounting locations—no modification for most installations.\u003c\/li\u003e\n  \u003cli\u003eInstallation time typically under 1 hour for an experienced technician.\u003c\/li\u003e\n  \u003cli\u003eInspect related steering components and alignment after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key construction and warranty details?\u003c\/h3\u003e\n\u003cp\u003eThe stabilizer features a hardened chrome piston and durable seals to stand up to off-road use and heavier tires. Rough Country backs the N3 with a limited lifetime replacement warranty, giving added peace of mind for long-term ownership.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome hardened 18mm piston rod for improved strength and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eRobust internal valving tuned for mixed on\/off-road driving.\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime replacement warranty from Rough Country.\u003c\/li\u003e\n  \u003cli\u003eBuilt to resist everyday road debris and typical off-road conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Rough Country N3 Steering Stabilizer 8732630 is aimed at owners of 1988–2006 Chevy and GMC trucks and SUVs who want better steering control after installing larger tires or lifts, drivers who experience steering vibration or wander, and anyone seeking a durable, OEM-style replacement with an industry-backed warranty. It’s a practical upgrade for commuters, daily drivers, and off-road enthusiasts who need steadier road manners without reworking steering geometry.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the N3 a direct replacement for my 1999 Chevy Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Rough Country N3 8732630 is a direct-fit steering stabilizer for 1988–2006 Chevy and GMC trucks, including 1999 Silverados.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this stabilizer require vehicle modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No major modifications are required; it mounts to the factory locations. Professional installation is recommended if you’re not experienced with suspension work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67585126203577,"sku":"B07DPJRHCN","price":179.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-n3-front-assembly.jpg?v=1790468183"},{"product_id":"uanofcn-u-joint-shift-bellow-transom-seal-kit-for-volvo-penta-omc-cobra-1986-1993-complete-gimbal-seals-hardware","title":"UANOFCN U-Joint Shift Bellow \u0026 Transom Seal Kit for Volvo Penta OMC Cobra 1986–1993 — Complete gimbal, seals \u0026 hardware","description":"\u003cstrong\u003eUANOFCN 3854127 is a complete u-joint, shift bellow and transom seal kit designed to restore steering and prevent water intrusion on 1986–1993 Volvo Penta and OMC Cobra stern drives.\u003c\/strong\u003e\n\n\u003cp\u003eThis kit supplies the rubber bellows, transom seals, gimbal bearings and related hardware needed to refurbish the lower unit connections on compatible stern drive models. It replaces multiple OEM part numbers and is intended for use on SX-series Volvo Penta drives and OMC Cobra stern drives produced between 1986 and 1993. The components are molded to withstand marine exposure and to rebuild the drive's critical water-blocking and lubrication seals.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and drive models will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is compatible with Volvo Penta SX family drives and many OMC Cobra stern drive units from the late 1980s to early 1990s. Verify your drive model against the listed fitment to ensure correct application.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Volvo Penta: SX-S, SX-C, SX-R, SX-M, DP-S, DP-S1, DP-SM\u003c\/li\u003e\n  \u003cli\u003eFits OMC Cobra stern drives built 1986–1993\u003c\/li\u003e\n  \u003cli\u003eCross-replaces OEMs like 508105, 911826, 914036 and 3854127\u003c\/li\u003e\n  \u003cli\u003eIncludes the bellow, transom seal, gimbal bearing and mounting hardware shown\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how complete is the kit?\u003c\/h3\u003e\n\u003cp\u003eThis is a full transom seal and gimbal bellow kit intended to provide all visible components required to reseal the lower drive interface. The package groups the primary rubber elements plus the metal and fastener accessories needed for installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMain u-joint shift bellow and transom seal components\u003c\/li\u003e\n  \u003cli\u003eGimbal bearing \/ transom seal assembly pieces\u003c\/li\u003e\n  \u003cli\u003eAssorted clamps, seals and mounting hardware as pictured\u003c\/li\u003e\n  \u003cli\u003eInstallation hardware to replace worn seals without sourcing extra parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installing this kit help boat performance or maintenance?\u003c\/h3\u003e\n\u003cp\u003eReplacing degraded bellows and seals prevents water intrusion into the drive and maintains proper lubrication, which protects bearings and u-joints. New rubber components also reduce play and vibration in the steering and drive linkage, restoring smoother control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStops seawater from entering the gimbal and transom area\u003c\/li\u003e\n  \u003cli\u003ePreserves grease and protects u-joints and bearings\u003c\/li\u003e\n  \u003cli\u003eReduces linkage wear that causes steering looseness\u003c\/li\u003e\n  \u003cli\u003eRestores factory-style sealing without custom fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: boat owners, marine mechanics and restoration specialists working on Volvo Penta SX-series or OMC Cobra stern drives from 1986 to 1993 who need a direct-fit replacement for worn bellows and transom seals. This kit is aimed at anyone performing scheduled maintenance or addressing leaks, steering play, or visible bellows deterioration. Always confirm your drive model and OEM cross-reference numbers before ordering to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit replace OEM part 508105?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the UANOFCN kit cross-replaces OEM numbers including 508105 and several others listed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit a 1990 Volvo Penta SX-C drive?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits SX-series drives such as SX-C from 1986–1993; confirm your drive model before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"UANOFCN","offers":[{"title":"Default Title","offer_id":67585135902905,"sku":"B0D4QM73FJ","price":194.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/uanofcn-u-joint-shift-bellow-kit-front-packaging.jpg?v=1790468637"},{"product_id":"bal-slideout-gearbox-for-rvs-13-tooth-sprocket-with-pre-attached-bracket-universal-fit-durable-drive","title":"BAL Slideout Gearbox for RVs — 13-Tooth Sprocket with Pre-Attached Bracket, Universal-Fit Durable Drive","description":"\u003cp\u003e\u003cstrong\u003eThe BAL R25076-1 is a ready-to-install slideout gearbox featuring a 13-tooth sprocket and an attached mounting bracket for reliable RV slideout operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement gearbox is built for BAL RV slideout systems and shipped with a pre-installed mounting bracket to simplify fitting. It uses durable materials and precision components engineered to restore smooth, controlled movement to slideout assemblies. Whether you're repairing a worn part or upgrading a failing unit, this gearbox is designed for straightforward installation and consistent performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this gearbox fit my RV slideout?\u003c\/h3\u003e\n\u003cp\u003eThe unit is described as a universal-fit replacement designed to match common BAL slideout setups. The included mounting bracket reduces the need for additional adapters and helps align the gearbox with existing hardware. Measure mounting points and sprocket orientation to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e13-tooth sprocket matches many BAL slideout chains and drives\u003c\/li\u003e\n  \u003cli\u003ePre-attached bracket reduces installation steps\u003c\/li\u003e\n  \u003cli\u003eUniversal-fit design for a wide range of applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality can I expect?\u003c\/h3\u003e\n\u003cp\u003eThis gearbox is assembled from quality parts chosen for durability and accurate engagement with slideout mechanisms. Precision machining and robust housings help maintain gear alignment and reduce wear over time. The construction aims to deliver consistent operation under normal RV usage conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision gears for smooth meshing and reduced backlash\u003c\/li\u003e\n  \u003cli\u003eSturdy bracket to maintain correct mounting angle\u003c\/li\u003e\n  \u003cli\u003eComponents selected for longevity in mobile applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eThe BAL R25076-1 arrives with its mounting bracket already installed to simplify installation. Basic hand tools such as socket wrenches, screwdrivers and possibly a torque wrench are usually sufficient. Follow vehicle-specific instructions for safe removal of the old gearbox and secure mounting of the replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBracket pre-installed to streamline alignment and mounting\u003c\/li\u003e\n  \u003cli\u003eTypical install requires common hand tools only\u003c\/li\u003e\n  \u003cli\u003eRefer to RV manufacturer guidelines for torque and safety steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check after installing the replacement gearbox?\u003c\/h3\u003e\n\u003cp\u003eAfter fitting, cycle the slideout slowly to verify smooth travel and even engagement of the sprocket. Inspect for unusual noises, binding or uneven motion and re-torque fasteners if needed. Periodic checks during the first few uses help ensure the gearbox seats correctly and performs reliably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRun a few full extension and retraction cycles at low speed\u003c\/li\u003e\n  \u003cli\u003eListen for abnormal grinding or skipping sounds\u003c\/li\u003e\n  \u003cli\u003eConfirm all fasteners remain tight and sprocket meshes properly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The BAL R25076-1 gearbox is intended for RV owners, repair technicians, and fleet managers needing a direct replacement for slideout drive assemblies. It suits anyone who wants a durable, ready-to-mount unit with a 13-tooth sprocket and a bracket fitted to reduce installation time. This part is especially useful when restoring reliable slideout movement without redesigning mounting hardware.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the BAL R25076-1 gearbox easy to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It ships with the mounting bracket pre-installed and typically requires common hand tools for mounting and alignment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the gearbox work with my existing slideout chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Likely if your system uses a 13-tooth sprocket; check sprocket tooth count and mounting points for compatibility before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BAL","offers":[{"title":"Default Title","offer_id":67585138327737,"sku":"B07XVX7W9L","price":217.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bal-r25076-1-front-view-with-bracket.jpg?v=1790468762"},{"product_id":"ghmarine-transom-seal-rebuild-kit-for-volvo-penta-sx-dp-omc-cobra-3854127-full-bellows-gimbal-bearing-kit","title":"GHmarine Transom Seal Rebuild Kit for Volvo Penta SX\/DP \u0026 OMC Cobra 3854127 — Full Bellows, Gimbal Bearing Kit","description":"\u003cp\u003e\u003cstrong\u003eGHmarine 3854127 Transom Seal Rebuild Bellows Kit is a complete transom service kit designed to replace worn bellows, gimbal bearings, exhaust U-joint bellows and related seals on compatible Volvo Penta SX\/DP and OMC Cobra stern drives.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit gathers the common wear items needed when servicing the transom area of mid‑1980s to early‑1990s stern drives. It’s intended to restore sealing and connection points between the engine and the outdrive, reducing water ingress and restoring reliable mechanical coupling. Components match several OEM reference numbers so you can replace multiple aging parts in a single maintenance session.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models and years will this transom kit service?\u003c\/h3\u003e\n\u003cp\u003eThe kit fits OMC Cobra outdrives produced roughly from 1986 through 1993 that do not use a cone clutch, as well as a range of Volvo Penta SX and DP drive models (SX‑S, SX‑C, SX‑R, SX‑M, DP‑S). Confirm compatibility by comparing OEM part references or your drive model plate before purchase. If your drive matches the listed part numbers, this kit supplies the primary transom components for a rebuild.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOMC Cobra outdrives (1986–1993) without cone clutch\u003c\/li\u003e\n  \u003cli\u003eVolvo Penta SX and DP series: SX‑S, SX‑C, SX‑R, SX‑M, DP‑S\u003c\/li\u003e\n  \u003cli\u003eReplaces parts: 3854127, 914036, 911826, 3853807, 508105, 3841481\u003c\/li\u003e\n  \u003cli\u003eCheck drive ID plate to confirm model and serial range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and what do they fix?\u003c\/h3\u003e\n\u003cp\u003eThis transom service kit bundles the bellows for the U‑joint exhaust and the shift cable, a gimbal bearing, outdrive mounting gasket, clamps and a water hose. Together these parts address common failure points that cause exhaust leaks, water intrusion, and sloppy shifting at the transom. Replacing them helps restore sealing integrity and the correct mechanical alignment between engine and outdrive.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eU‑joint exhaust bellows — prevents exhaust and water leakage\u003c\/li\u003e\n  \u003cli\u003eShift cable bellows — protects linkage from corrosion and wear\u003c\/li\u003e\n  \u003cli\u003eGimbal bearing — restores alignment and smooth steering motion\u003c\/li\u003e\n  \u003cli\u003eMounting gasket, clamps, and hose — seal and secure the transom interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know when to install this rebuild kit?\u003c\/h3\u003e\n\u003cp\u003eInstall the kit if you observe cracked or collapsed bellows, water in the bilge near the transom, noisy or loose gimbal movement, or visible exhaust leaks where the U‑joint meets the transom. These symptoms indicate the seals and flexible connections are past their service life and should be replaced to avoid more extensive damage. Proactive replacement during routine service prevents corrosion and keeps drive performance consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCracked, split, or hardened bellows material\u003c\/li\u003e\n  \u003cli\u003eWater intrusion at the engine‑to‑drive junction or in the bilge\u003c\/li\u003e\n  \u003cli\u003eLoose, noisy, or binding gimbal bearing movement\u003c\/li\u003e\n  \u003cli\u003eVisible exhaust or shift‑linkage leaks at the transom boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I prepare before starting the transom rebuild?\u003c\/h3\u003e\n\u003cp\u003eGather basic tools, a service manual for torque specs and disassembly order, fresh marine grease, and towels or drip pans for fluids. Work on a stable lift or trailer so the outdrive can be supported; plan for several hours if you’re doing it yourself. If uncertain about bearing fitment or alignment, consider having a marine mechanic perform the service to ensure water‑tight installation and correct gimbal clearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eService manual or OEM torque\/installation guidance\u003c\/li\u003e\n  \u003cli\u003eAppropriate hand tools, grease, and sealant per manual\u003c\/li\u003e\n  \u003cli\u003eSupport for outdrive and drip pans for fluids\u003c\/li\u003e\n  \u003cli\u003eTime allotment: several hours for a careful DIY job\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Boat owners, DIY mechanics, and marine technicians working on compatible Volvo Penta SX\/DP or OMC Cobra outdrives who need a single parts kit to renew transom seals, bellows, gimbal bearing and mounting hardware. The kit suits routine maintenance or repair after years of service when flexible seals and bearings show wear.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my Volvo Penta SX drive?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits SX and DP series listed (SX‑S\/C\/R\/M, DP‑S). Verify your drive model and OEM part numbers before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are gimbal bearing and bellows included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit contains gimbal bearing, U‑joint and shift cable bellows, gasket, clamps and a water hose.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GHmarine","offers":[{"title":"Default Title","offer_id":67585146257593,"sku":"B07DCGVCZS","price":194.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ghmarine-front-packaging-transom-kit.jpg?v=1790468923"},{"product_id":"a-premium-power-steering-cooler-for-chevrolet-gmc-cadillac-1999-2013-aluminum-core-oem-fit","title":"A-Premium Power Steering Cooler for Chevrolet\/GMC\/Cadillac (1999–2013) — Aluminum core, OEM-fit","description":"\u003cp\u003e\u003cstrong\u003eThe A-Premium Power Steering Cooler is a direct-fit replacement heat exchanger engineered to keep power steering fluid cooler and protect steering components on select Chevrolet, GMC and Cadillac trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aluminum-and-steel oil cooler is made to meet OEM form and function so you can swap it into the factory location without major modifications. It helps lower fluid temperature, preserves fluid viscosity and reduces stress on racks, pumps and hoses—especially useful for towing, heavy loads and hot-weather driving. The unit ships with a 1-year guarantee and carries several cross-reference numbers for easy identification.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this cooler fit?\u003c\/h3\u003e\n\u003cp\u003eThis cooler is built to fit numerous GM trucks and SUVs from model years roughly 1999–2013. Fitment covers multiple Silverado, Sierra, Suburban, Tahoe, Yukon and Escalade variants including ESV and EXT models where specified. Always verify the part reference numbers and physical dimensions against your original cooler before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCadillac Escalade: 2002–2004 (Escalade ESV\/EXT 2004)\u003c\/li\u003e\n  \u003cli\u003eChevrolet: Avalanche 1500 (1999–2006), Silverado\/Silverado HD\/Classic (1999–2007 variants), Suburban 1500\/2500 (2000–2013 ranges), Tahoe (2000–2004)\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra 1500\/1500 HD\/Sierra 2500\/3500 (1999–2007 variations), Yukon\/Yukon XL 1500\/2500 (2000–2013 ranges)\u003c\/li\u003e\n  \u003cli\u003eReference numbers for confirmation: 918-301, 918301, 15295843, 25895896\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this cooler protect steering performance under load?\u003c\/h3\u003e\n\u003cp\u003eBy increasing the surface area for heat transfer, the aluminum heat sink pulls excess heat out of the circulating power steering fluid. Cooler fluid maintains more consistent viscosity, which helps the steering pump and rack operate with less friction and noise during hard work. That lowers the chance of premature wear and helps preserve steering feel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-efficiency aluminum core accelerates heat dissipation\u003c\/li\u003e\n  \u003cli\u003eReduces fluid breakdown at elevated temperatures\u003c\/li\u003e\n  \u003cli\u003eHelps prevent steering chatter, sticking or reduced assist under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical and connection specifications?\u003c\/h3\u003e\n\u003cp\u003eThe cooler combines a steel body with an aluminum heat sink and is sized to fit the OEM mounting points for listed GM vehicles. Inlet and outlet fittings match the factory inside\/outside diameters so hoses attach without adapters in most installations. Check the exact dimensions to confirm clearance in your engine bay.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: steel housing with aluminum heat sink\u003c\/li\u003e\n  \u003cli\u003eDimensions: height 2.007 in, length 17.078 in, width 12.047 in\u003c\/li\u003e\n  \u003cli\u003eFittings: inlet\/outlet inside diameter 0.275 in, outside diameter 0.374 in\u003c\/li\u003e\n  \u003cli\u003eWarranty: 1-year limited guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this an easy swap for mechanics or DIYers?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic underhood work: drain or contain fluid, remove the old cooler and hoses, and bolt in the new unit. Because it is made to OEM-like dimensions and fittings, no special fabrication is normally required. Always follow safe fluid-handling and torque procedures when reinstalling lines and fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design for fast bolt-in swaps\u003c\/li\u003e\n  \u003cli\u003eStandard GM-style inlet\/outlet diameters to match existing hoses\u003c\/li\u003e\n  \u003cli\u003eRecommended: inspect hoses and clamps during installation and replace if brittle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: owners and technicians of compatible Chevrolet, GMC and Cadillac trucks and SUVs who need a reliable, OEM-style power steering fluid cooler—especially vehicles that tow, carry heavy loads or operate in hot climates. If your steering shows heat-related issues or the original cooler is corroded or leaking, this A-Premium unit provides a ready-made replacement with factory-like fit and performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2003 Chevrolet Silverado 2500HD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this A-Premium cooler lists compatibility with Silverado 2500HD models from 2001–2006; verify reference numbers and hose diameters before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the cooler require adapters for the hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—its inlet\/outlet diameters (0.275\" ID, 0.374\" OD) are sized to match factory GM hoses in compatible models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67585155924153,"sku":"B0BXFHBP2Q","price":206.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-front-view-power-steering-cooler_7bd8c7c1-3bc4-4eac-ab6d-43932d423ac3.jpg?v=1790469067"},{"product_id":"a-premium-power-steering-pressure-return-hose-for-toyota-tacoma-2005-2014-v6-4-0l-direct-fit-oe-quality","title":"A-Premium Power Steering Pressure \u0026 Return Hose for Toyota Tacoma 2005–2014 V6 4.0L — Direct-Fit OE-Quality","description":"\u003cp\u003e\u003cstrong\u003eA-Premium Power Steering Pressure \u0026amp; Return Hose is a direct-fit replacement that restores leak-free steering fluid delivery for Toyota Tacoma 2005–2014 V6 4.0L models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Tacoma shows signs of steering fluid loss, stiff steering, or visible hose wear, replacing the pressure and return hose assembly with a component built to OE-like standards stops leaks and returns reliable hydraulic performance. This A-Premium assembly matches the original routing and fittings for Tacoma 2005–2014 V6 4.0L variants (including Pre Runner and Base trims), and it arrives ready to install without modification.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose reduce leaks and maintain steering performance?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses multi-layer rubber bonded to galvanized steel tubing and a double-locking fitting design to prevent fluid seepage at high pressures. Materials and construction resist temperature cycling, abrasion, and corrosion to keep seals intact over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-layer structural rubber resists swelling and cracking.\u003c\/li\u003e\n  \u003cli\u003eGalvanized steel internal tubing adds dimensional support under pressure.\u003c\/li\u003e\n  \u003cli\u003eDouble-lock fittings secure hydraulic connections against vibration.\u003c\/li\u003e\n  \u003cli\u003eEngineered to match factory routing for proper strain relief.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat pressure and strength specs should I expect from this assembly?\u003c\/h3\u003e\n\u003cp\u003eA-Premium supplies engineering ratings that exceed typical operating conditions to provide a safety margin for demanding use. Both working and burst pressure values are specified so you can compare to the OEM hose you are replacing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum working pressure: 1,500 psi for normal hydraulic loads.\u003c\/li\u003e\n  \u003cli\u003eBurst pressure ratings: 8,700–10,000 psi for structural safety.\u003c\/li\u003e\n  \u003cli\u003eTensile strength: 1,600 lb to withstand pull forces and handling.\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet original equipment dimensions and connection types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hose fit my Toyota Tacoma model and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is manufactured for direct compatibility with Toyota Tacoma V6 4.0L engines from 2005, 2006–2013 (Base and Pre Runner), and 2014. The hose uses the same mounting points and fittings as the factory unit so most installs are straightforward for a technician or experienced DIYer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle fitment: Tacoma 2005 V6 4.0L; 2006–2013 V6 4.0L (Base, Pre Runner); 2014 V6 4.0L.\u003c\/li\u003e\n  \u003cli\u003eReference numbers: 3401238, 4441004220 for cross-checking fitment.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit ends and factory routing reduce need for extra parts.\u003c\/li\u003e\n  \u003cli\u003eInstallation typically requires common hand tools and line-bleeding afterward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? A-Premium's pressure and return hose is intended for Toyota Tacoma owners and repair shops replacing a worn, cracked, or leaking steering line on 2005–2014 V6 4.0L trucks. It's a suitable choice for drivers who want a robust, OE-spec replacement built from layered rubber and galvanized steel, backed by a one-year unlimited-mileage guarantee. Choose this hose if you need dependable steering fluid containment, factory-style fitment, and a component rated for high-pressure hydraulic systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this hose fit my 2008 Toyota Tacoma V6 4.0L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This A-Premium assembly is compatible with Toyota Tacoma V6 4.0L models from 2006–2013, including 2008 Base and Pre Runner trims.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty does A-Premium provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A-Premium covers this power steering hose with a one-year unlimited-mileage guarantee for manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67585163395257,"sku":"B0BZ8LJM1Z","price":213.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-front-assembly-toyota-tacoma.jpg?v=1790469221"},{"product_id":"neovire-steering-gear-box-assembly-for-ezgo-txt-medalist-1994-6-2001-direct-fit-heavy-duty-replacement","title":"NEOVIRE Steering Gear Box Assembly for EZGO TXT\/Medalist (1994.6–2001) — Direct-Fit, Heavy-Duty Replacement","description":"\u003cp\u003e\u003cstrong\u003eNEOVIRE's Steering Gear Box Assembly is a direct-fit replacement for EZGO TXT, Medalist (1994.6–2001) and EZGO ST350 Workhorse (1996+) golf carts, restoring precise steering and smooth handling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your EZGO golf cart has play in the steering, binding, or inconsistent wheel tracking, this NEOVIRE gearbox is engineered to bring back predictable control. Built from high-strength steel, durable alloys and engineered elastomers, the assembly matches OEM reference numbers so you can swap it in without extensive modification. It’s offered for both gas and electric TXT\/Medalist models and for later ST350 Workhorse units—just verify the reference number before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this gearbox improve steering feel and control?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn gearbox reduces free play, removes binding and returns consistent steering ratios so small inputs translate into accurate wheel direction. The unit’s internal gearing and bearings are calibrated for smooth rotation under load, which lowers steering effort and reduces steering feedback noise.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRestores tight steering geometry and predictable turn-in.\u003c\/li\u003e\n\u003cli\u003eReduces vibration and steering noise for quieter operation.\u003c\/li\u003e\n\u003cli\u003eImproves wheel alignment consistency across uneven surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat models and reference numbers does this assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThis NEOVIRE assembly is compatible with EZGO TXT and Medalist carts manufactured from mid-1994 through 2001, and with EZGO ST350 Workhorse models from 1996 onward. It replaces several common OEM reference numbers so installation is straightforward for matching chassis.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces reference numbers: 70314-G01 \/ 70314G01, 70314-G02 \/ 70314G02.\u003c\/li\u003e\n\u003cli\u003eAlso fits 70723-G02 \/ 70723G02 and 70147-G02 \/ 70147G02 references.\u003c\/li\u003e\n\u003cli\u003eSuitable for both gas and electric TXT\/Medalist models—confirm part number before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the NEOVIRE gearbox and what maintenance does it need?\u003c\/h3\u003e\n\u003cp\u003eThe gearbox is constructed with corrosion-resistant steel and durable alloys, paired with high-elasticity rubber seals to keep contaminants out and lubricants in. Designed for daily use, it limits routine maintenance to periodic inspection and grease checks, extending service intervals compared with worn OEM units.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-strength materials resist wear from repeated steering cycles.\u003c\/li\u003e\n\u003cli\u003eDurable seals and bearings minimize lubricant loss and contaminant intrusion.\u003c\/li\u003e\n\u003cli\u003eSimple inspection points make preventative checks quick and easy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is sold ready-to-install and matches OEM mounting points, reducing installation time for mechanically inclined owners and technicians. Basic tools and standard shop practices are all that’s required; however, inspecting surrounding steering components is recommended while replacing the gearbox.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect-fit for compatible EZGO models—little to no modification expected.\u003c\/li\u003e\n\u003cli\u003eStandard hand tools and torque specs from the service manual needed for safe installation.\u003c\/li\u003e\n\u003cli\u003eCheck tie rods, bushings and steering column for wear during replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This NEOVIRE Steering Gear Box Assembly is ideal for golf cart owners, fleet managers and maintenance shops working on EZGO TXT and Medalist vehicles from 1994.6–2001 or EZGO ST350 Workhorse units from 1996+. It suits anyone who wants a dependable, OEM-compatible replacement that restores control, reduces steering play and keeps carts operating reliably for years.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this gearbox fit both gas and electric EZGO models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It fits gas and electric EZGO TXT and Medalist models from 1994.6–2001 and EZGO ST350 Workhorse from 1996+, verify reference number first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the assembly ready to install out of the box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The NEOVIRE gearbox is supplied ready to install, using OEM-style mounting for straightforward replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"NEOVIRE","offers":[{"title":"Default Title","offer_id":67585164279993,"sku":"B0GJS15P1L","price":309.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/neovire-steering-gearbox-front-view.jpg?v=1790469251"},{"product_id":"dorman-power-steering-cooler-for-gm-trucks-suvs-918-301-direct-fit-replacement-durable-cooling","title":"Dorman Power Steering Cooler for GM Trucks \u0026 SUVs — 918-301 Direct-Fit Replacement, Durable Cooling","description":"\u003cp\u003e\u003cstrong\u003eThe Dorman 918-301 Power Steering Cooler is a direct-fit replacement cooler engineered to restore proper power steering fluid cooling and protect steering components on specified GM trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your power steering system is running hotter than normal, leaking, or the original cooler has been damaged, this Dorman unit offers an engineered substitute that matches the fit and function of the factory part for many Chevrolet, GMC and Cadillac models. Built from quality materials and developed by product engineers in the United States, this cooler is intended as a durable, reliable replacement to help maintain steering performance and extend component life.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this cooler fit?\u003c\/h3\u003e\n\u003cp\u003eThis Dorman cooler is manufactured to match the original equipment specifications for a wide range of GM truck and SUV model years. Always confirm fitment by entering your vehicle trim in the garage tool and checking the Confirmed Fit indicator before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible makes: Chevrolet, GMC, Cadillac\u003c\/li\u003e\n  \u003cli\u003eIncluded model families: Silverado, Sierra, Suburban, Tahoe, Avalanche, Yukon, Escalade and EXT\/ESV variants\u003c\/li\u003e\n  \u003cli\u003eModel years covered: late-1990s through mid-2010s across specific trims — verify with the fitment tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement help my vehicle’s steering system?\u003c\/h3\u003e\n\u003cp\u003eA power steering cooler reduces fluid temperature and helps prevent overheating that can accelerate wear or cause foaming and loss of hydraulic effectiveness. Installing a properly fitting cooler preserves fluid integrity and supports consistent steering response under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintains lower operating temperatures for the steering fluid\u003c\/li\u003e\n  \u003cli\u003eHelps prevent premature wear of pumps, hoses, and seals\u003c\/li\u003e\n  \u003cli\u003eSupports reliable steering feel during towing, hauling, or heavy-duty use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and quality details of the Dorman 918-301?\u003c\/h3\u003e\n\u003cp\u003eThe cooler is constructed from quality materials chosen for durability and corrosion resistance and is engineered to match original mounting points for straightforward installation. Dorman backs its parts with engineering oversight from U.S.-based product teams to help ensure consistent manufacturing standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable tubing and fin design for effective heat dissipation\u003c\/li\u003e\n  \u003cli\u003eDesigned to match original cooler fit, function, and mounting locations\u003c\/li\u003e\n  \u003cli\u003eProduced under quality control protocols with U.S. product engineering support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm fitment and install the part correctly?\u003c\/h3\u003e\n\u003cp\u003eBefore purchasing, enter your vehicle details into the seller’s garage tool and verify the Confirmed Fit bar. If an information icon appears, review the fitment notes to ensure compatibility with your exact trim and equipment. Installation typically follows original mounting points and standard steering-fluid connection procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the online garage or VIN lookup to confirm fitment for your exact model and year\u003c\/li\u003e\n  \u003cli\u003eIf fitment shows an “i” icon, hover to read notes or consult a technician for verification\u003c\/li\u003e\n  \u003cli\u003eReplace using appropriate fluid-handling precautions and bleed the steering system per manufacturer guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dorman 918-301 Power Steering Cooler is intended for owners and mechanics of compatible Chevrolet, GMC and Cadillac trucks and SUVs who need a dependable, cost-effective replacement for a damaged or failing factory cooler. It’s suited for vehicles used in towing, heavy loads, off-road driving, or general high-mileage service where preserving steering system longevity and maintaining fluid temperatures are priorities. Confirm fitment with the vehicle tool and follow recommended installation and fluid-handling procedures for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Dorman 918-301 a direct replacement for factory coolers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s designed to match the original cooler’s fit and function for the listed GM models, but confirm fitment with your vehicle information first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install this cooler?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools are usually sufficient; follow standard power steering fluid-handling and bleeding procedures, or have a technician perform the installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":67585198751929,"sku":"B01ID3PTAG","price":253.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dorman-power-steering-cooler-front-view.jpg?v=1790469693"},{"product_id":"rough-country-n3-steering-stabilizer-for-2007-2018-jeep-wrangler-jk-nitrogen-charged-heavy-duty-dampening","title":"Rough Country N3 Steering Stabilizer for 2007–2018 Jeep Wrangler JK - Nitrogen-Charged, Heavy-Duty Dampening","description":"\u003cp\u003e\u003cstrong\u003eThe Rough Country N3 Steering Stabilizer for 2007–2018 Jeep Wrangler JK (part 8730630) is a direct-fit shock designed to reduce vibration and bump steer for improved control and tire life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you drive a lifted or stock JK and want crisper steering feel, fewer steering jitters, and longer-lasting front-end components, this N3 unit is engineered as a bolt-on upgrade. It replaces the factory stabilizer with a heavy-duty, nitrogen-charged design tuned to dampen steering feedback from rough roads, uneven terrain, and larger tires. Installation is straightforward and supported by Rough Country, and the product carries Rough Country’s limited lifetime replacement warranty.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the N3 stabilizer improve everyday driving?\u003c\/h3\u003e\n\u003cp\u003eThe N3 stabilizer smooths steering inputs by absorbing high-frequency vibrations and reducing rebound from road impacts. Drivers notice less wandering at highway speeds and fewer quick, small corrections when hitting potholes or rough surfaces.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduces steering vibration and wheel flutter for a steadier highway ride.\u003c\/li\u003e\n\u003cli\u003eMinimizes bump steer effects from larger tires and lifted suspensions.\u003c\/li\u003e\n\u003cli\u003eHelps protect tires, ball joints, and other steering components from premature wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my 2007–2018 Jeep Wrangler JK and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eYes — the 8730630 N3 is a direct-fit stabilizer for 2007–2018 Wrangler JK models and designed for bolt-on installation. Basic hand tools and a jack are typically all that’s required; most owners can complete the swap in a couple of hours.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect-fit replacement for JK steering stabilizer mounts.\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on install with factory mounting locations retained.\u003c\/li\u003e\n\u003cli\u003eRough Country offers installation support and instructions if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the N3 compare to a stock stabilizer or other aftermarket options?\u003c\/h3\u003e\n\u003cp\u003eThe N3 is a heavy-duty, nitrogen-charged unit tuned for more aggressive damping than factory components, offering a noticeable improvement in steering control without being over-stiff. Compared with basic aftermarket options, the N3 balances on-road comfort with off-road durability.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNitrogen-charged design for consistent damping under varied conditions.\u003c\/li\u003e\n\u003cli\u003eEngineered to reduce vibration while preserving steering feedback.\u003c\/li\u003e\n\u003cli\u003eBuilt for durability to handle lifted setups and larger tires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or warranty coverage comes with this stabilizer?\u003c\/h3\u003e\n\u003cp\u003eRoutine visual inspections for mounting hardware and seal condition are recommended, but the N3 requires minimal maintenance. Rough Country backs the stabilizer with a limited lifetime replacement warranty, providing added assurance against defects and premature failure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinimal maintenance: periodic checks of bolts and seals advised.\u003c\/li\u003e\n\u003cli\u003eLimited lifetime replacement warranty through Rough Country.\u003c\/li\u003e\n\u003cli\u003eDurable construction reduces long-term replacement frequency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Rough Country N3 Steering Stabilizer 8730630 is ideal for Jeep Wrangler JK owners who want a simple, reliable upgrade to improve steering stability—especially drivers with lifted Jeeps or larger-than-stock tires. It suits daily commuters who want steadier highway manners, weekend trail riders seeking fewer steering shocks, and anyone who prefers a durable, direct-fit part backed by manufacturer support and warranty coverage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the N3 fit all 2007–2018 Jeep Wrangler JK models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Rough Country N3 8730630 is a direct-fit replacement for 2007–2018 Wrangler JK models using factory stabilizer mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation difficult and what tools are needed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Installation is bolt-on and straightforward with basic hand tools and a jack; most owners finish within a couple of hours.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67585440940217,"sku":"B07DPFDXRN","price":200.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-n3-stabilizer-front-view.jpg?v=1790470132"},{"product_id":"tuningsworld-steering-rack-and-pinion-for-polaris-rzr-s-rzr-4-800-efi-2009-2014-part-1823443-heavy-duty-tie-rod-ends","title":"Tuningsworld Steering Rack and Pinion for Polaris RZR S \u0026 RZR 4 800 EFI (2009–2014) — Part 1823443, Heavy-Duty Tie Rod Ends","description":"\u003cp\u003e\u003cstrong\u003eTuningsworld's steering rack and pinion assembly (part 1823443) is a direct-fit replacement for select Polaris RZR models, including heavy-duty tie rod ends for improved durability on aggressive terrain.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete rack-and-pinion steering kit is built to restore or upgrade steering precision on Polaris RZR S 800 EFI and RZR 4 800 EFI models from 2009–2014 (excluding the RZR 800 model) and specified military RZR\/Ranger variants. It replaces OEM part number 1823443 and ships as a full-length unit that includes two reinforced tie rod ends. The design focuses on longevity and resistance to wear from oversized tires and rough off-road use.\u003c\/p\u003e\n\n\u003ch3\u003eWill this steering rack fit my Polaris RZR or military variant?\u003c\/h3\u003e\n\n\u003cp\u003eCheck year and model compatibility carefully: this assembly fits RZR S 800 EFI and RZR 4 800 EFI produced between 2009 and 2014, plus several listed military RZR and Ranger models. It is not compatible with the RZR 800 model. Confirm your OEM part number or vehicle build years before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM part number: 1823443\u003c\/li\u003e\n  \u003cli\u003eCompatible: 2009–2014 RZR S 800 EFI and RZR 4 800 EFI\u003c\/li\u003e\n  \u003cli\u003eIncludes military application fitments for 2011–2014 variants listed by manufacturer\u003c\/li\u003e\n  \u003cli\u003eNot compatible with RZR 800 model—verify chassis and engine design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this rack-and-pinion assembly handle heavy tires and rough terrain?\u003c\/h3\u003e\n\n\u003cp\u003eThe unit is engineered for increased resistance to abuse from large tires and harsh off-road conditions. Construction emphasizes rugged components and stronger tie rod ends to reduce angle-induced wear, helping maintain steering geometry under load. This improves service life when compared with lighter, stock steering parts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty tie rod ends reduce wear caused by extreme steering angles\u003c\/li\u003e\n  \u003cli\u003eFull-length assembly built to withstand impacts and heavy loads\u003c\/li\u003e\n  \u003cli\u003eMaterials selected for abrasion and fatigue resistance in off-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the dimensions and included parts in the kit?\u003c\/h3\u003e\n\n\u003cp\u003eThe steering assembly ships as a full-length unit measuring approximately 46.37 inches (1178 mm) including the tie rods. The kit comes with the rack-and-pinion housing and two heavy-duty tie rod ends preinstalled or included for straightforward replacement. This reduces installation time versus sourcing individual components.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTotal installed length: ~46.37\" (1178 mm)\u003c\/li\u003e\n  \u003cli\u003eTwo heavy-duty tie rod ends included\u003c\/li\u003e\n  \u003cli\u003eComplete rack-and-pinion assembly—no additional steering rack core required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation typically requires standard steering removal tools and alignment after mounting. Because this is a direct-replacement assembly, installation follows the same steps as the factory unit, but always reference service manuals and torque specs. Plan a professional alignment after install to ensure correct toe and steering behavior.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFollow Polaris torque specs and safety procedures during install\u003c\/li\u003e\n  \u003cli\u003ePost-install wheel alignment recommended for proper toe and handling\u003c\/li\u003e\n  \u003cli\u003eInspect boots and tie rod ends periodically for wear or contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Tuningsworld rack-and-pinion assembly is aimed at Polaris owners and service shops replacing a worn or damaged steering rack on compatible RZR S 800 and RZR 4 800 vehicles, plus the specified military RZR\/Ranger models. It's especially useful for drivers upgrading steering reliability for aggressive off-roading or larger-tire setups that increase steering loads. If you need an OEM-replacement length and robust tie rod ends to handle tougher terrain, this kit provides a ready-to-fit option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace OEM part 1823443?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Tuningsworld assembly is a direct replacement for OEM part number 1823443.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with all RZR 800 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It fits RZR S 800 EFI and RZR 4 800 EFI (2009–2014) and listed military variants, but not the RZR 800 model.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Tuningsworld","offers":[{"title":"Default Title","offer_id":67585442152633,"sku":"B07MR6SCJ8","price":188.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tuningsworld-steering-rack-front-view.jpg?v=1790470175"},{"product_id":"dorman-steering-intermediate-shaft-dorman-425-176-direct-fit-steel-shaft-corrosion-resistant","title":"Dorman Steering Intermediate Shaft Dorman 425-176 — Direct-Fit Steel Shaft, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eThe Dorman 425-176 Steering Shaft is an OE-style replacement steering intermediate shaft designed to restore secure, precise steering on specific vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a direct-fit replacement for a worn or damaged intermediate steering shaft, the Dorman 425-176 is machined to the original tolerances and tested to Federal Motor Vehicle Safety Standards. Constructed from steel with corrosion-resistant coating and proven under torsional and fatigue testing, this shaft offers a like-for-like option for compatible model years. Before purchasing, confirm fitment by entering your vehicle’s make, model and trim in the vehicle-garage tool to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this shaft match the original equipment?\u003c\/h3\u003e\n\u003cp\u003eThis steering shaft is engineered to the same dimensional tolerances as the factory part so it mounts and functions like the original. Critical surfaces such as splines, mounting faces and overall length are precision-machined for a secure connection to the steering column and rack or gearbox.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-machined splines and mounting surfaces for direct replacement\u003c\/li\u003e\n  \u003cli\u003eSteel construction for strength under steering loads\u003c\/li\u003e\n  \u003cli\u003eCoated finish to resist corrosion and maintain long-term fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and durability testing does it undergo?\u003c\/h3\u003e\n\u003cp\u003eDorman subjects this shaft to regulatory and durability tests to verify performance under expected driving conditions. Testing covers torsional strength, fatigue life and exposure to corrosive environments so the part maintains structural integrity and function over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets Federal Motor Vehicle Safety Standards for steering components\u003c\/li\u003e\n  \u003cli\u003eTorsional and fatigue testing to simulate long-term use\u003c\/li\u003e\n  \u003cli\u003eSalt spray testing for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm this is the correct part for my vehicle?\u003c\/h3\u003e\n\u003cp\u003eFitment is vehicle-specific; Dorman provides a fitment lookup to ensure the 425-176 matches your application. Enter your vehicle’s year, make, model and trim in the listing’s garage tool or cross-reference with the OEM part number to avoid returns and ensure installation goes smoothly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the online garage tool to verify compatibility\u003c\/li\u003e\n  \u003cli\u003eCompare overall length and spline count to your original shaft\u003c\/li\u003e\n  \u003cli\u003eContact seller with VIN or OEM number for additional confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard steering intermediate shaft replacement procedures and typically requires basic hand tools and safety precautions. Because it is a direct-fit design, installation time is reduced versus universal or adjustable alternatives, but alignment and steering-system checks after installation are recommended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design reduces fitment adjustments\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs and safety steps when tightening fasteners\u003c\/li\u003e\n  \u003cli\u003eInspect steering linkage and fasteners after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Professional technicians and DIY enthusiasts who need a dependable, direct-replacement intermediate steering shaft for compatible vehicles will appreciate the Dorman 425-176. It suits anyone looking to restore original steering feel and fit without premium OE pricing, provided they confirm vehicle compatibility with the fitment tool before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the Dorman 425-176 fit my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check the online fitment tool with your vehicle year, make, model and trim or compare the OEM part number to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this shaft meet safety standards?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The part is tested to Federal Motor Vehicle Safety Standards and undergoes torsional, fatigue and corrosion testing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":67585472921785,"sku":"B000Q0K5SQ","price":193.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dorman-425-176-front-view.jpg?v=1790470891"},{"product_id":"ogatoo-power-steering-pump-208740-w-reservoir-fit-1996-2014-chevy-gmc-cadillac-oem-compatible","title":"OGATOO Power Steering Pump 208740 w\/Reservoir — Fit 1996–2014 Chevy GMC Cadillac, OEM-compatible","description":"\u003cp\u003e\u003cstrong\u003eThe OGATOO 208740 is a brand-new direct-replacement power steering pump with reservoir engineered to restore factory steering feel on compatible 1996–2014 Chevrolet, GMC, Cadillac and Hummer H2 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement pump is designed as an OEM-compatible unit that installs in place of worn or leaking original pumps. It’s supplied new (not remanufactured) with a built-in reservoir and tested to meet hydraulic performance expectations so you regain smoother, quieter, and more consistent steering response. Before ordering, verify fitment for your exact model year, engine, and OEM part numbers listed to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does this OGATOO power steering pump fit?\u003c\/h3\u003e\n\u003cp\u003eThis pump covers a broad range of GM trucks, SUVs, and full-size luxury models produced between the late 1990s and mid-2010s. Fitment includes multiple variants of Silverado, Sierra, Suburban, Tahoe, Yukon, Avalanche, Escalade, Escalade EXT\/ESV, and some Hummer H2 years. Confirm the part cross-references or OEM numbers to match your application exactly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Silverado 1500 (1999–2003), Suburban, Tahoe, Avalanche (various years listed)\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra 1500 (1999–2013), Yukon\/Yukon XL, C2500\/K2500 families (1996)\u003c\/li\u003e\n  \u003cli\u003eCadillac: Escalade, Escalade EXT, Escalade ESV (2003, 2007–2014 depending on model)\u003c\/li\u003e\n  \u003cli\u003eHummer H2 compatibility for select 2008–2009 models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this pump improve steering performance?\u003c\/h3\u003e\n\u003cp\u003eEach OGATOO pump is hydraulically tested to reproduce OEM pressure and flow characteristics, which helps restore precise steering effort and responsiveness. Replacing a failing pump reduces whining, fluid leaks, and sluggish wheel return while improving overall drivability. The premium materials and corrosion-resistant construction increase service life compared with fatigued originals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-standard hydraulic testing for consistent pressure and flow\u003c\/li\u003e\n  \u003cli\u003eBuilt-in reservoir for direct replacement installation\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials to extend operational life\u003c\/li\u003e\n  \u003cli\u003eAddresses leaks, noise, and stiff or slow steering responses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I need to know before installation?\u003c\/h3\u003e\n\u003cp\u003eProper preparation and a few routine steps will protect the new pump and prevent recurring problems. Thoroughly flushing the power steering system, replacing worn O-rings and seals, and using the manufacturer-recommended fluid are all essential. Bleeding trapped air from the system after installation is required for smooth operation; professional installation is recommended if you are not experienced.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify vehicle, year, engine, and OEM part number before purchase\u003c\/li\u003e\n  \u003cli\u003eFlush system and replace seals, hoses, or O-rings as needed\u003c\/li\u003e\n  \u003cli\u003eUse specified power steering fluid; do not overtighten bolts\u003c\/li\u003e\n  \u003cli\u003eBleed air by turning the wheel fully left and right before\/after starting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich OEM part numbers does this replace and what’s included?\u003c\/h3\u003e\n\u003cp\u003eThe OGATOO 208740 pump is listed as a direct replacement for a long set of GM part numbers commonly found on affected models. The unit ships brand-new with the reservoir included; pulley must be confirmed separately for vehicles that require it. Inlet and outlet fittings match common GM configurations for an easier swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces part numbers such as 20-8740, 208740, 15076612, 15234826 and others\u003c\/li\u003e\n  \u003cli\u003eCondition: brand new (not remanufactured); reservoir included\u003c\/li\u003e\n  \u003cli\u003eInlet: 10mm push-in fitting; Outlet: M16×1.5 male threaded\u003c\/li\u003e\n  \u003cli\u003ePulley not included—verify pulley requirements for your vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The OGATOO 208740 is intended for owners and professional technicians replacing a failing or leaking power steering pump on compatible Chevrolet, GMC, Cadillac, and Hummer H2 vehicles from the specified years. It’s a practical choice for anyone seeking a new, tested OEM-style replacement to restore steering comfort, reduce noise, and avoid recurring steering-system failures. If you need alignment with your exact vehicle, have your OEM part number and model year ready before ordering, and consider professional installation for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump include the pulley?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the OGATOO 208740 includes the reservoir but does not include the pulley.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What should I do before installing the new pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Flush the system, replace seals\/O-rings, use recommended fluid, and bleed air after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OGATOO","offers":[{"title":"Default Title","offer_id":67585480261817,"sku":"B0FFB15QQ2","price":225.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ogatoo-208740-front-assembly.jpg?v=1790471225"},{"product_id":"a-premium-power-steering-pump-for-honda-accord-2008-2012-l4-2-4l-7-groove-pulley-direct-replacement","title":"A-Premium Power Steering Pump for Honda Accord 2008–2012 L4 2.4L — 7-Groove Pulley, Direct Replacement","description":"\u003cp\u003e\u003cstrong\u003eA-Premium Power Steering Pump with integrated 7-groove pulley designed to restore smooth steering on Honda Accord 2008–2012 L4 2.4L models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your steering feels heavy, noisy, or shows signs of fluid contamination, this direct-replacement power steering pump from A-Premium is built to meet factory fit and function for select Honda Accord years. The assembly ships with the pulley installed and matches original equipment profile and mounting points. It is engineered to be a professional-level replacement component; proper installation includes flushing the system and using Honda\/Acura-approved power steering fluid to avoid premature wear or noise.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this pump affect steering performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or leaking pump can return predictable hydraulic assist and quieter operation to your steering. The A-Premium unit is intended to match original flow and pressure characteristics so steering effort and responsiveness closely mirror OEM behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores hydraulic assist for consistent steering effort\u003c\/li\u003e\n  \u003cli\u003eInstalled 7-groove pulley matches factory belt routing\u003c\/li\u003e\n  \u003cli\u003eReduces squeal and vibration associated with failing pumps\u003c\/li\u003e\n  \u003cli\u003eHelps eliminate metal debris circulation when paired with a flush and filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this part compatible with my vehicle and how do I confirm fit?\u003c\/h3\u003e\n\u003cp\u003eThis pump fits Honda Accord 2008, 2009, 2010, 2011, and 2012 with the L4 2.4L engine when the original uses a 7-groove pulley. Confirm compatibility by comparing the reference numbers or your OEM part number to avoid installation surprises.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirmed fit: Honda Accord 2008–2012, L4 2.4L engines\u003c\/li\u003e\n  \u003cli\u003eReference numbers: 21-5495, 215495, 965495, N9900725, 9900725, 6050P, 5821NKTA, 56110R40325\u003c\/li\u003e\n  \u003cli\u003eMatches factory mounting, pulley groove count, and hydraulic ports\u003c\/li\u003e\n  \u003cli\u003eVerify your vehicle’s pulley count and part references before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance steps should I follow?\u003c\/h3\u003e\n\u003cp\u003eTo help ensure long service life, flush the steering system and install a new filter before fitting the replacement pump. Use only Honda\/Acura-specified power steering fluid; incompatible fluids can cause noise, poor performance, or early failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlush system and replace filter prior to pump installation\u003c\/li\u003e\n  \u003cli\u003eFill and bleed the system using Honda\/Acura power steering fluid only\u003c\/li\u003e\n  \u003cli\u003eInspect belts, hoses, and pulleys and replace worn components\u003c\/li\u003e\n  \u003cli\u003eHave a qualified technician torque mounting bolts to factory specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this pump include a warranty and what does it cover?\u003c\/h3\u003e\n\u003cp\u003eA-Premium supports this part with a one-year unlimited-mileage guarantee covering manufacturing defects and workmanship. The warranty gives you recourse for genuine faults but does not replace routine maintenance steps or damage from improper fluids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-year unlimited-mileage warranty from A-Premium\u003c\/li\u003e\n  \u003cli\u003eCovers manufacturing defects and assembly issues\u003c\/li\u003e\n  \u003cli\u003eDoes not cover damage from wrong fluid or lack of flushing\/filtering\u003c\/li\u003e\n  \u003cli\u003eKeep purchase and installation records for warranty claims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This power steering pump is aimed at DIY mechanics, independent shops, and fleet maintainers tackling steering system failures on Honda Accord 2008–2012 2.4L vehicles. Choose this A-Premium replacement if you need an OE-style pump with a 7-groove pulley, plan to flush and filter the system, and want a backed component with a one-year warranty. If you are unsure about fitment or installation, consult a professional to verify part numbers and perform the fluid service before final assembly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump include the pulley?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The A-Premium unit ships with the 7-groove pulley pre-installed for proper belt alignment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fluid should I use after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use only Honda\/Acura-specified power steering fluid; other fluids may cause noise or damage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67585483276473,"sku":"B07MR571R8","price":234.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-front-assembly_a110b10e-ab90-4df5-be1e-dda63666240c.jpg?v=1790471356"},{"product_id":"basaltauto-power-steering-pump-for-2002-2007-dodge-ram-1500-3-7l-5-7l-with-pulley-reservoir-direct-fit-quiet-performance","title":"BasaltAuto Power Steering Pump for 2002–2007 Dodge Ram 1500 (3.7L–5.7L) with Pulley \u0026 Reservoir — Direct-Fit Quiet Performance","description":"\u003cp\u003e\u003cstrong\u003eBasaltAuto Power Steering Pump with Pulley and Reservoir (20-70269 \/ 96-70269) is a direct-fit replacement engineered to restore reliable, quiet steering assist in 2002–2007 Dodge Ram 1500 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ram 1500 is showing heavier steering feel, groaning during turns, or leaking fluid from the pump area, this complete assembly provides a one-part swap that includes the pulley and reservoir for faster installation. Built from corrosion-resistant materials with long-life bearings and precision assembly, the unit aims to reproduce factory-like hydraulic performance across idle and highway speeds. Below you’ll find how it fits, what it fixes, and why it’s a practical repair choice.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this pump improve steering performance on my Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eThis pump is designed to deliver steady hydraulic pressure across the RPM range so steering assist remains predictable whether you’re idling or cruising. The precision assembly reduces internal vibration to lower common groaning or whining noises caused by worn pumps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConsistent hydraulic output for smoother turns at low and high speeds\u003c\/li\u003e\n  \u003cli\u003eReduced pump chatter for quieter cabin steering operation\u003c\/li\u003e\n  \u003cli\u003eIncludes pulley and reservoir to match factory routing and flow\u003c\/li\u003e\n  \u003cli\u003eDirect-service fit minimizes additional modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my Dodge Ram 1500 and which engine options are compatible?\u003c\/h3\u003e\n\u003cp\u003eThis BasaltAuto assembly lists several OEM cross-reference numbers and fits 2002–2007 Ram 1500 trucks with 3.7L V6, 4.7L V8, 5.7L V8, and 2002–2003 5.9L V8 engines. Always confirm part numbers or compare mounting points and connectors on your vehicle before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2002–2007 Ram 1500: 3.7L V6, 4.7L V8, 5.7L V8\u003c\/li\u003e\n  \u003cli\u003eAlso fits 2002–2003 Ram 1500 5.9L V8\u003c\/li\u003e\n  \u003cli\u003eCross-references OEM numbers like 96-70269 and 20-70269 for verification\u003c\/li\u003e\n  \u003cli\u003eComplete assembly reduces chances of fitment mismatch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build features ensure durability?\u003c\/h3\u003e\n\u003cp\u003eThe pump uses corrosion-resistant housing materials and sealed long-life bearings to stand up to road conditions and extended service intervals. Precision assembly and quality internal components help maintain pressure delivery and extend operational life compared to severely worn originals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant housing for longer exterior life\u003c\/li\u003e\n  \u003cli\u003eLong-life bearings reduce premature wear and noise\u003c\/li\u003e\n  \u003cli\u003ePrecision assembly to minimize internal vibration and leaks\u003c\/li\u003e\n  \u003cli\u003eIncludes pulley and reservoir assembled to factory-style specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eBecause this unit is a complete pump, pulley, and reservoir assembly, installation is typically straightforward for a mechanic or DIYer familiar with power steering systems. Expect standard steps: bleed the system, check belt alignment, and inspect connections for leaks after initial test drive.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes pre-assembled to reduce bench work and alignment issues\u003c\/li\u003e\n  \u003cli\u003eRequires belt tensioning and fluid bleeding after install\u003c\/li\u003e\n  \u003cli\u003eInspect mounting bolts, hoses, and fittings during replacement\u003c\/li\u003e\n  \u003cli\u003eMatch OEM cross-reference numbers to confirm fit before installing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BasaltAuto pump assembly is aimed at owners and mechanics who need a reliable direct-fit replacement for a noisy, leaking, or weak power steering pump on 2002–2007 Dodge Ram 1500 trucks. It’s a good choice when you prefer a full preassembled unit (pulley and reservoir included) to reduce installation time and avoid sourcing multiple parts. Verify compatibility with your engine variant and OEM cross-reference numbers before purchase to ensure a correct match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump fit a 2004 Dodge Ram 1500 4.7L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This BasaltAuto pump is compatible with 2002–2007 Ram 1500 4.7L engines—confirm OEM cross-reference before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the reservoir included with the pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The assembly includes the reservoir and pulley for a complete direct-fit replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BasaltAuto","offers":[{"title":"Default Title","offer_id":67585509163193,"sku":"B0FSS58G8N","price":190.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/basaltauto-power-steering-pump-front-assembly.jpg?v=1790471801"},{"product_id":"loautong-power-steering-pump-for-honda-accord-3-0l-2003-2007-pulley-included-direct-fit-replacement","title":"Loautong Power Steering Pump for Honda Accord 3.0L 2003–2007 — Pulley Included, Direct-Fit Replacement","description":"\u003cp\u003e\u003cstrong\u003eLoautong's Power Steering Pump with Pulley is a direct-fit replacement designed to restore smooth, assisted steering for Honda Accord 3.0L (2003–2007) and compatible Acura MDX 3.5L models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen steering becomes noisy, heavy, or starts leaking fluid, a failing pump is often the culprit. This Loautong assembly arrives with the pulley included and is engineered to match factory mounting points and fluid flow requirements for specified V6 Honda and Acura applications. It replaces OE numbers such as 21-5349, 96-5349, 56110-RDJA02, 56110-RCA-A01, and related references to make installation straightforward for mechanics and experienced DIYers alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this replacement pump affect steering performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn pump with this Loautong unit restores hydraulic pressure that assists turning, reducing steering effort and eliminating jerky response. Improved pressure delivery leads to smoother input-to-wheel reaction and fewer steering-related noises.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores hydraulic assist for easier turning at low speeds\u003c\/li\u003e\n  \u003cli\u003eReduces whining or squealing caused by worn internal components\u003c\/li\u003e\n  \u003cli\u003eImproves steering feel consistency across different RPMs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this pump compatible with my vehicle and which parts does it replace?\u003c\/h3\u003e\n\u003cp\u003eThis pump is built to fit Honda Accord 3.0L models from 2003–2007 and Acura MDX 3.5L from 2003–2006, matching OEM mounting and pulley alignment. The listing corresponds to multiple replacement numbers, helping you confirm cross-compatibility before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible vehicles: Honda Accord 3.0L (2003–2007), Acura MDX 3.5L (2003–2006)\u003c\/li\u003e\n  \u003cli\u003eCommon replacement numbers covered: 21-5349, 96-5349, 56110RDJA02, 56110-RCA-A01, 56110RDJA01, 56483RDAA01\u003c\/li\u003e\n  \u003cli\u003ePulley included; reservoir not included—matches many OE setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat symptoms indicate the pump should be replaced?\u003c\/h3\u003e\n\u003cp\u003eSeveral signs point to pump wear or internal damage; addressing them early protects the steering rack, hoses, and fluid system from additional harm. If you see any of these symptoms, consider this direct-fit Loautong pump as the corrective replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVisible power steering fluid leaks around the pump or hoses\u003c\/li\u003e\n  \u003cli\u003eSquealing, whining, or groaning noises when steering, especially at idle\u003c\/li\u003e\n  \u003cli\u003eHeavy, jerky, or inconsistent steering feel while turning\u003c\/li\u003e\n  \u003cli\u003eMetal debris or flakes found in drained steering fluid\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and ownership?\u003c\/h3\u003e\n\u003cp\u003eThe unit ships ready with the pulley mounted to streamline installation; it uses the vehicle’s original reservoir and fittings when required. Loautong backs the pump with a one-year unlimited-mileage guarantee, giving buyers peace of mind after replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePulley installed on the pump to match belt alignment and reduce setup steps\u003c\/li\u003e\n  \u003cli\u003eDesigned for bolt-on replacement using existing hoses and mounting points\u003c\/li\u003e\n  \u003cli\u003eOne-year unlimited-mileage warranty from Loautong for added confidence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Loautong Power Steering Pump with Pulley is aimed at Honda and Acura owners or independent repair shops needing a reliable, direct-fit replacement for Accord 3.0L (2003–2007) and compatible MDX models. It's ideal for drivers experiencing leaks, unusual steering noises, or heavy steering effort who want a cost-effective alternative to dealership parts without sacrificing fit or function. If you plan to perform the replacement yourself or have a trusted technician handle it, this pump is supplied to simplify the swap and get your steering system back to normal quickly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump include the pulley and reservoir?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Loautong pump ships with the pulley installed; the reservoir is not included and usually reuses the vehicle’s original reservoir.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What vehicles is this unit compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Honda Accord 3.0L (2003–2007) and Acura MDX 3.5L (2003–2006); it matches common OEM replacement numbers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Loautong","offers":[{"title":"Default Title","offer_id":67585567621305,"sku":"B0DT18RL2F","price":179.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/loautong-front-assembly-pump-with-pulley.jpg?v=1790472075"},{"product_id":"heurofosh-power-steering-pump-16792a39-for-mercruiser-4-3-8-2l-direct-fit-aftermarket-replacement","title":"Heurofosh Power Steering Pump 16792A39 for MerCruiser 4.3–8.2L — Direct-Fit Aftermarket Replacement","description":"\u003cp\u003e\u003cstrong\u003eHeurofosh 16792A39 is a direct-fit power steering pump designed to replace worn units on MerCruiser gas engines from 4.3L through 8.2L, restoring hydraulic steering function on boats.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your MerCruiser-powered boat is producing squeals, knocking, or a stiff steering wheel, the steering pump is often the cause. This Heurofosh aftermarket pump matches common OEM part numbers and fits a wide range of MerCruiser 4.3–8.2L gasoline engines, offering an affordable option to get hydraulic steering performing correctly again. Verify fit by comparing mounting and the reservoir return hose orientation before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and OEM numbers does this pump fit?\u003c\/h3\u003e\n\u003cp\u003eThis Heurofosh pump is built to be compatible with many MerCruiser gas V6 and V8 applications. It lists multiple OEM part numbers so you can match it against your original unit or parts diagram to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible engine displacements: 4.3L (262 V6), 5.0L (305 V8), 5.7L (350 V8), 5.8L (357), 6.2L (377 V8), 6.3L (383\/385), 7.4L (454 V8), 8.2L (502 V8).\u003c\/li\u003e\n  \u003cli\u003eCommon OEM numbers matched: 16792A1, 16792A39, 16792A33, 18-7508.\u003c\/li\u003e\n  \u003cli\u003eDesigned as a replacement for Alpha and Bravo drive configurations where specified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know my steering pump needs replacement?\u003c\/h3\u003e\n\u003cp\u003eSigns of a failing pump are usually audible or affect steering feel. If you notice noise or loss of hydraulic assist, inspect the pump and hoses promptly to avoid further damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUnpleasant or grinding noise when turning the wheel.\u003c\/li\u003e\n  \u003cli\u003eStiff or unresponsive steering effort under load.\u003c\/li\u003e\n  \u003cli\u003eLoud squealing from the engine compartment during steering input.\u003c\/li\u003e\n  \u003cli\u003eKnocking sounds or persistent fluid leaks around the pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I compare before buying and installing?\u003c\/h3\u003e\n\u003cp\u003eNot every pump variant is identical—physical orientation and hose locations matter. Confirm the return hose outlet position, mounting bolt pattern, and pulley alignment to ensure a correct swap without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck that the reservoir return hose exits from the bottom of the reservoir as shown in reference images.\u003c\/li\u003e\n  \u003cli\u003eCompare photos and the original part number on your old pump to the Heurofosh listing.\u003c\/li\u003e\n  \u003cli\u003eVerify mounting holes, shaft spline count, and pulley size for alignment with your setup.\u003c\/li\u003e\n  \u003cli\u003eContact seller with your engine model if uncertain about fit before purchasing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat can I expect from installation and performance?\u003c\/h3\u003e\n\u003cp\u003eWhen correctly matched to your engine and installed with clean hydraulic fluid, the pump should restore normal steering assist. Use the recommended marine power steering fluid and bleed the system according to the manufacturer’s instructions to avoid air binding or harsh feel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace with clean hoses and new clamps if old components show wear or leakage.\u003c\/li\u003e\n  \u003cli\u003eBleed the steering circuit to remove trapped air after installation for consistent assist.\u003c\/li\u003e\n  \u003cli\u003eInspect belt tension and alignment to prevent premature noise or wear.\u003c\/li\u003e\n  \u003cli\u003eTest steering at idle and underway to confirm quiet, responsive operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Boat owners and marine technicians operating MerCruiser 4.3L–8.2L gasoline engines who need a cost-effective, direct-replacement power steering pump. This option suits anyone restoring hydraulic steering performance on Alpha or Bravo drive boats, provided they verify part numbers, hose orientation, and mounting details against their original pump before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump fit my MerCruiser 350 (5.7L) engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this Heurofosh model lists fit for 5.7L 350 V8 MerCruiser engines; verify your existing pump’s part number or hose orientation before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What symptoms indicate the pump needs replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace when steering is noisy, unresponsive, rigid, or if you hear loud squealing or knocking from the helm area.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Heurofosh","offers":[{"title":"Default Title","offer_id":67585573454009,"sku":"B0BLC67Y1R","price":280.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/heurofosh-power-steering-pump-front-view.jpg?v=1790472160"},{"product_id":"loautong-power-steering-pump-with-pulley-ford-expedition-2003-2006-20-312p1-direct-fit-pre-assembled","title":"Loautong Power Steering Pump with Pulley, Ford Expedition 2003–2006 — 20-312P1 Direct-Fit, Pre-assembled","description":"\u003cp\u003e\u003cstrong\u003eThe Loautong 20-312P1 power steering pump with pulley is a direct-fit replacement designed to restore steering assist for Ford Expedition 2003–2006 and compatible F‑150, Navigator, and Lincoln Mark LT V8 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your vehicle shows signs of reduced steering assist, whining from the pump, or visible leaks, a reliable replacement pump can bring back predictable, safer steering performance. Loautong's assembly arrives pre‑assembled with a matched pulley and is manufactured to match OE mounting points and fluid ports so it integrates with existing lines and brackets without modification.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines will this pump fit?\u003c\/h3\u003e\n\u003cp\u003eThis 20-312P1 pump is intended for specific Ford and Lincoln platforms with 4.6L and 5.4L V8 engines. It covers multiple model years across Expedition, F‑150, Navigator, and Lincoln Mark LT when your factory part number matches one of the listed cross-references.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Ford Expedition 2003–2006 (4.6L\/5.4L V8)\u003c\/li\u003e\n  \u003cli\u003eFits Ford F‑150 2004–2008 and Lincoln Mark LT 2006–2008 where applicable\u003c\/li\u003e\n  \u003cli\u003eFits Lincoln Navigator 2003–2006 for the compatible V8 engines\u003c\/li\u003e\n  \u003cli\u003eCross-references part numbers like 20-312P1, 20312P1, 6065PX, and several factory codes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this pump built and what quality can I expect?\u003c\/h3\u003e\n\u003cp\u003eLoautong supplies this pump with attention to fit and finish: the pulley is pre-installed and key interfaces follow OE geometry. The unit is produced to offer dependable operation and a consistent mounting pattern, but professional installation and system flushing are recommended for longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled pump and pulley for easier installation\u003c\/li\u003e\n  \u003cli\u003eMachined ports and mounting points to align with factory brackets\u003c\/li\u003e\n  \u003cli\u003eManufactured for consistent fluid flow and mechanical fit\u003c\/li\u003e\n  \u003cli\u003ePackage includes one complete 20-312P1 pump with pulley\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I do during installation and after replacing the pump?\u003c\/h3\u003e\n\u003cp\u003eHave a qualified technician install the pump to ensure correct torque, belt alignment, and secure hose connections. After installation, bleed the steering system, check for leaks, and confirm belt tension and pulley alignment to avoid premature wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional installation recommended for safety and correct fit\u003c\/li\u003e\n  \u003cli\u003eFlush or replace old power steering fluid to remove contaminants\u003c\/li\u003e\n  \u003cli\u003eVerify belt routing and tension after pulley installation\u003c\/li\u003e\n  \u003cli\u003eInspect hoses, fittings, and reservoir for leaks or damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Mechanics, fleet service shops, and DIYers with automotive experience who need a direct-replacement power steering pump for compatible Ford and Lincoln V8 models will find this Loautong 20-312P1 useful. It’s intended for vehicles matching the listed years and engine sizes, and for owners who want an assembled pump with a pre-installed pulley to simplify replacement. If you’re uncertain about fitment, compare your existing part number to the provided cross-references or consult a professional to confirm compatibility before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump fit my 2005 Ford Expedition 5.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 20-312P1 is listed for 2003–2006 Ford Expedition models with 4.6L and 5.4L V8 engines when part numbers match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is professional installation required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Professional installation is recommended to ensure proper mounting, belt alignment, system bleeding, and leak-free connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Loautong","offers":[{"title":"Default Title","offer_id":67585574469817,"sku":"B0DT6XV2QT","price":213.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/loautong-power-steering-pump-front.jpg?v=1790472237"},{"product_id":"rough-country-n3-steering-stabilizer-for-1980-1998-bronco-f-150-f-250-direct-fit-replacement-hydraulic-damping","title":"Rough Country N3 Steering Stabilizer for 1980–1998 Bronco\/F-150\/F-250 — Direct-Fit Replacement, Hydraulic Damping","description":"\u003cp\u003e\u003cstrong\u003eRough Country N3 Steering Stabilizer 8734230 is a direct-fit replacement designed to reduce bump steer and vibration for 1980–1998 Ford Bronco, F-150, and F-250 vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt as a performance-focused upgrade, the N3 stabilizer restores steering control and dampens oscillations caused by rough roads, larger tires, or aging components. It’s a bolt-on unit engineered to match factory dimensions while delivering improved handling, longer life for related steering parts, and the peace of mind of Rough Country’s limited lifetime replacement warranty.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the N3 stabilizer improve steering feel on rough roads?\u003c\/h3\u003e\n\u003cp\u003eThe N3 uses hydraulic damping tuned to absorb sudden jolts and steering feedback that typically causes wandering or shaking at the wheel. That results in a steadier centerline and less spontaneous pull when you hit potholes, rocks, or uneven surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHydraulic valving reduces rebound and compression feedback for smoother inputs.\u003c\/li\u003e\n  \u003cli\u003eDesigned to cut vibration passed to the steering wheel for less driver fatigue.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit sizing preserves factory geometry for consistent handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my 1980–1998 Bronco or F-series truck?\u003c\/h3\u003e\n\u003cp\u003eThe 8734230 is specified for late-model classic Broncos and Ford F-150\/F-250 trucks from 1980 through 1998. It installs where the original steering stabilizer mounts, making it a straightforward swap on compatible models without reworking brackets or steering components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for factory stabilizers on listed model years.\u003c\/li\u003e\n  \u003cli\u003eBolt-on installation that uses existing mounting points and hardware.\u003c\/li\u003e\n  \u003cli\u003eIdeal when upgrading tires or restoring older steering systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be simple for anyone with basic mechanical skills: remove the factory unit, position the Rough Country stabilizer, and torque fasteners to spec. Rough Country supports the product with installation guidance, and most installations take under an hour with common hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical tools: sockets, wrenches, torque wrench, and a jack or stands for access.\u003c\/li\u003e\n  \u003cli\u003eUses factory mounting points—no custom fabrication needed.\u003c\/li\u003e\n  \u003cli\u003eSupported by Rough Country instructions and limited lifetime replacement warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability benefits can I expect from this stabilizer?\u003c\/h3\u003e\n\u003cp\u003eThe N3 is built to withstand off-road stress and highway use, helping protect tires, ball joints, and other steering parts from premature wear caused by uncontrolled steering motion. Its construction extends component life by reducing the repeated shock loads sent through the steering system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to reduce bump steer and limit vibration transfer.\u003c\/li\u003e\n  \u003cli\u003eSturdy materials and finish designed for long-term use in harsh conditions.\u003c\/li\u003e\n  \u003cli\u003eBacked by Rough Country’s limited lifetime replacement warranty for added assurance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Rough Country N3 Steering Stabilizer 8734230 is intended for owners of 1980–1998 Ford Broncos and F-150\/F-250 trucks who want a reliable, direct-fit upgrade to improve steering stability—especially those running larger tires, restoring older steering components, or seeking reduced vibration and longer-lasting steering hardware. It’s a practical choice for DIY mechanics, off-road enthusiasts, and anyone looking to restore precise steering feel without complex modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this stabilizer fit my 1995 F-150?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 8734230 is a direct-fit stabilizer for Ford F-150 models from 1980 through 1998.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is professional installation required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It’s a bolt-on replacement using factory mounts; basic tools and mechanical knowledge are sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67585578729657,"sku":"B07DPFDYRG","price":185.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-n3-front-view_f7735e92-4723-4789-abd8-7575877b40aa.jpg?v=1790472462"},{"product_id":"rough-country-dual-steering-stabilizer-for-jeep-wrangler-jl-gladiator-jt-2-5-8-lift-dual-dampers-reduced-vibration","title":"Rough Country Dual Steering Stabilizer for Jeep Wrangler JL \u0026 Gladiator JT 2.5–8\" Lift — Dual Dampers, Reduced Vibration","description":"\u003cp\u003e\u003cstrong\u003eRough Country's N3 Dual Steering Stabilizer is a bolt-on upgrade for Jeep Wrangler JL and Gladiator JT (2018–2025) with 2.5\"–8\" lifts that reduces steering vibration and bump steer for steadier handling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your lifted Jeep feels twitchy on rough roads or the steering transmits every trail impact into your hands, the N3 Dual Steering Stabilizer is engineered to damp those forces. It pairs two heavy-duty dampers to absorb shock and smooth steering inputs, helping protect tires and steering components while improving on- and off-road control. Constructed with a hardened piston rod and large-diameter body, this stabilizer is built for the added demands of lifted Wranglers and Gladiators.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the N3 Dual Stabilizer improve steering feel on rough terrain?\u003c\/h3\u003e\n\u003cp\u003eThe N3 system uses dual dampers to control rebound and compression separately, which cuts down on the jarring feedback that travels up the steering. By moderating rapid wheel movement and steering oscillation, it helps you maintain line and reduces driver fatigue over long runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-shock layout absorbs both bump and rebound events.\u003c\/li\u003e\n  \u003cli\u003e18mm chrome-hardened piston rod for reliable damping.\u003c\/li\u003e\n  \u003cli\u003eLarge-diameter bodies deliver steady control under load.\u003c\/li\u003e\n  \u003cli\u003eReduces steering kick and wheel hop on uneven surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my Jeep Wrangler JL or Gladiator JT with a lift kit?\u003c\/h3\u003e\n\u003cp\u003eThe stabilizer is specifically tailored for Jeep Wrangler JL and Gladiator JT models from 2018 through 2025 that have a 2.5\" to 8\" suspension lift. Fitment accounts for the altered steering geometry and ride height common to lifted Jeeps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle-specific brackets and mounting points included for correct alignment.\u003c\/li\u003e\n  \u003cli\u003eCompatible range: 2.5\"–8\" suspension lifts—no cutting or frame modification required.\u003c\/li\u003e\n  \u003cli\u003eEngineered to work with common aftermarket lift setups and larger tires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and maintenance-friendly is this stabilizer?\u003c\/h3\u003e\n\u003cp\u003eRough Country designed the N3 with rugged use in mind: the chrome-hardened piston rod resists wear and corrosion while the heavy-duty body sustains repeated impacts. The bolt-on installation requires basic hand tools, and the unit is backed by a multi-year warranty for added peace of mind.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e18mm hardened piston rod increases service life and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eLarge-diameter shock bodies for sustained damping performance.\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on installation with common tools; no hydraulic bleeding or special tooling.\u003c\/li\u003e\n  \u003cli\u003eIncludes a 3-year warranty to cover manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will the N3 affect other steering and suspension parts?\u003c\/h3\u003e\n\u003cp\u003eBy controlling steering oscillations and minimizing bump steer, the stabilizer eases stress on tires, tie rods, and ball joints, which can extend component life and improve tire wear patterns. It does not replace proper alignment or steeringcare—these should be addressed before installation for best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces vibration-related wear on steering linkage and suspension components.\u003c\/li\u003e\n  \u003cli\u003eCan improve tire longevity by reducing irregular wear from excessive oscillation.\u003c\/li\u003e\n  \u003cli\u003eWorks alongside proper alignment and steering corrections—complementary, not a substitute.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Rough Country N3 Dual Steering Stabilizer is for Jeep owners who run lifted Wrangler JL or Gladiator JT models (2018–2025) between 2.5\" and 8\" of lift and want firmer, more controlled steering on-road and off. It suits daily drivers who need improved highway stability, weekend trail rigs that take frequent impact, and anyone wanting to reduce strain on steering components without complex modifications. If you prioritize simpler bolt-on upgrades that deliver measurable reductions in steering vibration and bump steer, the N3 is a practical addition to a lifted Jeep build.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the N3 compatible with stock-height Jeeps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the N3 is designed for 2.5\"–8\" lifted Wrangler JL and Gladiator JT models; stock-height Jeeps may require a different stabilizer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typical bolt-on installation takes about one to two hours with common hand tools and basic mechanical experience.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67585580728505,"sku":"B07C2BNWMC","price":329.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-n3-front-view_00e2ae09-a706-4ba1-9f39-705d14e449a4.jpg?v=1790472601"},{"product_id":"talamoyi-power-steering-pump-for-dodge-ram-1500-2002-2007-with-7pk-pulley-reservoir","title":"TALAMOYI Power Steering Pump for Dodge Ram 1500 (2002–2007) with 7PK Pulley \u0026 Reservoir","description":"\u003cp\u003e\u003cstrong\u003eTALAMOYI Power Steering Pump with integrated 7PK pulley and reservoir replaces OEM steering pumps for 2002–2007 Dodge Ram 1500 models to restore smooth, responsive steering.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ram 1500 is showing heavy or inconsistent steering effort, a worn power steering pump can be the cause. This TALAMOYI assembly is built to match original factory specifications and arrives as a complete unit—pump, 7PK pulley, and fluid reservoir—so you can swap it in without hunting for extra parts. It’s offered to fit model years 2002 through 2007 and corresponds to a long list of OEM part numbers to simplify compatibility checks.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this pump improve steering performance?\u003c\/h3\u003e\n\u003cp\u003eThe TALAMOYI pump is designed to deliver steady hydraulic pressure to the steering rack, helping the wheel turn more predictably and reducing steering effort at low speeds. Replacing a failing pump improves steering feel and helps eliminate whining or jerky input response linked to failing components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces worn or noisy factory pump to reduce steering resistance.\u003c\/li\u003e\n  \u003cli\u003eRestores consistent hydraulic pressure for smoother turns.\u003c\/li\u003e\n  \u003cli\u003eIncludes reservoir to ensure correct fluid supply and prevent cavitation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Dodge Ram 1500 years and part numbers does it match?\u003c\/h3\u003e\n\u003cp\u003eThis power steering pump is specified for Dodge Ram 1500 model years 2002–2007 and cross-references multiple OEM numbers to help you confirm fitment before purchase. Verify your current part number or consult your VIN to ensure proper match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2002, 2003, 2004, 2005, 2006, 2007 Dodge Ram 1500.\u003c\/li\u003e\n  \u003cli\u003eCrosses to part numbers like 96-70269, 20-70269, 52113240AF and several OEM variants.\u003c\/li\u003e\n  \u003cli\u003eSold as a complete kit: pump, 7PK pulley, and reservoir packed in one box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard power steering pump replacement procedures and may require belt alignment for the 7PK pulley and proper fluid bleeding afterward. It’s advisable to inspect hoses, clamps, and belt condition when installing the new assembly to prevent repeat leaks or noise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes pulley pre-mounted for simpler belt alignment during installation.\u003c\/li\u003e\n  \u003cli\u003eBleed system after installation to remove air and avoid cavitation.\u003c\/li\u003e\n  \u003cli\u003eCheck and replace worn hoses and the serpentine belt if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality standards and guarantees come with this part?\u003c\/h3\u003e\n\u003cp\u003eThe pump is produced under controlled factory processes to meet the performance and fitment expectations of the original equipment. TALAMOYI emphasizes stable operation and careful quality checks during manufacture, though routine vehicle checks remain recommended after fitting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to original-equipment style standards for consistent performance.\u003c\/li\u003e\n  \u003cli\u003eUndergoes factory-level quality control and testing prior to shipping.\u003c\/li\u003e\n  \u003cli\u003ePackaged as one unit in a single box for secure transit and easier handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a 2002–2007 Dodge Ram 1500 and are experiencing heavy steering, whining from the pump, fluid leaks, or inconsistent steering feel, this TALAMOYI power steering pump with 7PK pulley and reservoir is intended as a direct replacement option. It suits DIY mechanics with moderate experience and professional installers who need a ready-to-fit assembly that matches multiple OEM references. Before ordering, confirm year and part number compatibility to ensure correct fitment for your truck.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this pump fit my 2004 Dodge Ram 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s specified for 2002–2007 Ram 1500 models. Confirm by matching your existing part number to the listed cross-references.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the pump include the pulley and reservoir?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the TALAMOYI unit ships complete with a 7PK pulley and reservoir in one box for straightforward replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TALAMOYI","offers":[{"title":"Default Title","offer_id":67585583022265,"sku":"B0BZVZTFY6","price":209.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/talamoyi-front-pump.jpg?v=1790472755"},{"product_id":"bilstein-front-steering-damper-for-2011-2016-silverado-2500-3500-hd-b8-5100-monotube-high-pressure","title":"Bilstein Front Steering Damper for 2011–2016 Silverado 2500\/3500 HD — B8 5100 Monotube, High-Pressure","description":"\u003cp\u003e\u003cstrong\u003eBilstein 33-196619 is a monotube front steering damper engineered to reduce steering kick and maintain consistent damping on 2011–2016 Silverado 2500 HD and 3500 HD trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis B8 5100-series steering damper replaces the factory unit with a high-pressure monotube design that resists foaming and sustains performance under heavy loads and rough roads. Built from corrosion-resistant materials and tuned gas pressure, it’s intended to restore control, reduce steering vibrations and deliver predictable steering feedback when towing or driving off-road.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this damper improve steering response?\u003c\/h3\u003e\n\u003cp\u003eThe monotube construction and high gas pressure keep damping consistent across a wide range of temperatures and conditions. That steadiness helps suppress bump steer and front-end oscillations so steering inputs feel firmer and more controlled.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonotube body offers immediate response without fade.\u003c\/li\u003e\n  \u003cli\u003eHigh gas pressure prevents oil foaming for stable damping.\u003c\/li\u003e\n  \u003cli\u003eTuned valving reduces vibration transmitted through the steering linkages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my Silverado 2500 HD or 3500 HD?\u003c\/h3\u003e\n\u003cp\u003eThis part is compatible with 2011–2016 Chevrolet Silverado 2500 HD and 3500 HD models. It is supplied to match factory mounting points so installation follows the original steering damper locations and hardware clearances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for 2011–2016 Silverado 2500\/3500 HD models.\u003c\/li\u003e\n  \u003cli\u003eNo major modifications required when replacing the OEM damper.\u003c\/li\u003e\n  \u003cli\u003eDesigned to integrate with stock steering geometry and suspension components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the Bilstein B8 5100 design reliable under load?\u003c\/h3\u003e\n\u003cp\u003eCorrosion-resistant materials and precision manufacturing deliver long service life even in harsh conditions. The monotube layout with gas-pressurized oil minimizes internal aeration and keeps damping consistent during heavy towing, frequent off-road use, or extended highway driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable construction resists wear and environmental corrosion.\u003c\/li\u003e\n  \u003cli\u003eGas-pressure technology prevents performance-robbing foaming.\u003c\/li\u003e\n  \u003cli\u003eEngineered valving maintains consistent control over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and maintenance look for this damper?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable replacing OEM steering components and follows factory mounting points. Periodic visual checks for mounting integrity and corrosion are recommended; the unit itself is sealed and service-free under normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces factory steering damper with matching mounts.\u003c\/li\u003e\n  \u003cli\u003eSealed unit requires no routine internal service.\u003c\/li\u003e\n  \u003cli\u003eInspect fasteners and brackets after initial miles and during regular maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Truck owners who drive 2011–2016 Silverado 2500 HD or 3500 HD and want a durable, fade-resistant steering damper to improve control while towing, hauling, or off-roading. It’s suited to drivers seeking a direct-fit upgrade to restore factory steering feel or increase stability under heavy use without modifying steering geometry.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this damper fit 2014 Silverado 3500 HD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Bilstein 33-196619 is compatible with 2011–2016 Silverado 2500 HD and 3500 HD models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the damper serviceable or sealed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The B8 5100 steering damper is a sealed, maintenance-free unit designed for long-term use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67585591935161,"sku":"B00CS3RTP6","price":267.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bilstein-front-damper-close-up.jpg?v=1790473286"},{"product_id":"auto-parts-prodigy-power-steering-pump-for-chevy-impala-monte-carlo-2006-2011-direct-fit-with-pre-set-pulley","title":"Auto Parts Prodigy Power Steering Pump for Chevy Impala\/Monte Carlo 2006–2011 — Direct-Fit with Pre-set Pulley","description":"\u003cp\u003e\u003cstrong\u003eThis Auto Parts Prodigy power steering pump with pulley is a direct-fit replacement engineered to restore smooth, quiet steering for 2006–2011 Chevy Impala and 2006–2007 Chevy Monte Carlo models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Impala or Monte Carlo is showing signs of leaking fluid, a stiff or unresponsive steering wheel, or noisy groans from the pump, replacing the worn unit can bring predictable steering effort back to normal. This aftermarket pump is built to match the original equipment fit and mounting points (OE references include 2069989, 88964571, 15267585, 88964358) so installation is straightforward and requires minimal adjustment.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this pump improve steering performance?\u003c\/h3\u003e\n\u003cp\u003eUpgrading to a correctly matched replacement pump restores hydraulic assist that reduces steering effort at low speeds while maintaining stability at higher speeds. The unit is designed to deliver consistent flow and pressure so steering feel becomes predictable again.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces worn components that cause whining, jerky movement, or inconsistent assist\u003c\/li\u003e\n  \u003cli\u003eDelivers steady hydraulic pressure for smoother turns\u003c\/li\u003e\n  \u003cli\u003eQuiet operation reduces noise under acceleration and low-speed maneuvers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my Chevy Impala or Monte Carlo?\u003c\/h3\u003e\n\u003cp\u003eThis pump is intended as a direct OE-fit replacement for specified model years: Chevy Impala (2006–2011) and Chevy Monte Carlo (2006–2007). It is manufactured to align with the original mounting points and pulley configuration to avoid modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with OE numbers: 2069989, 88964571, 15267585, 88964358\u003c\/li\u003e\n  \u003cli\u003ePre-set pulley to match belt routing and tension requirements\u003c\/li\u003e\n  \u003cli\u003eCheck year, engine, and steering type to confirm fit before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation for a DIYer or technician?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed for home mechanics and professional shops alike. The pump uses the same bolt pattern and hose connections as the original, so most installations require only basic tools and routine bleeding of the steering system afterward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design reduces the need for custom brackets or adapters\u003c\/li\u003e\n  \u003cli\u003eStandard hand tools typically handle removal and reattachment\u003c\/li\u003e\n  \u003cli\u003eFollow proper bleeding procedure to remove air and ensure consistent assist\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and performance should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis replacement pump is built for everyday driving conditions and engineered to resist leaks and premature wear. Materials and seals are selected to withstand the pressures of power steering systems common to these Chevy platforms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRugged construction for high-pressure operation and longer service life\u003c\/li\u003e\n  \u003cli\u003eSeals and finish resist common leak points found on aging pumps\u003c\/li\u003e\n  \u003cli\u003eConsistent assist effort from driveway starts to highway cruising\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers or repair professionals restoring steering performance on 2006–2011 Chevy Impala and 2006–2007 Chevy Monte Carlo vehicles who need a reliable, OE-compatible power steering pump with pulley. It’s a practical replacement for worn, noisy, or leaking pumps and suits anyone seeking a straightforward install without sacrificing durability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump match original equipment part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it replaces OE numbers 2069989, 88964571, 15267585, and 88964358 for proper fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this pump myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's designed for DIY or professional installation using basic tools and standard bleeding procedures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Auto Parts Prodigy","offers":[{"title":"Default Title","offer_id":67585592393913,"sku":"B0CZC9JY4R","price":175.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/auto-parts-prodigy-front-view-pump-with-pulley.jpg?v=1790473315"},{"product_id":"rough-country-v2-dual-steering-stabilizer-for-2005-2024-ford-super-duty-2-8-lift-46mm-piston-t6061-aluminum","title":"Rough Country V2 Dual Steering Stabilizer for 2005–2024 Ford Super Duty (2\"–8\" Lift) — 46mm Piston, T6061 Aluminum","description":"\u003cp\u003e\u003cstrong\u003eThe Rough Country V2 Dual Steering Stabilizer is a heavy-duty, bolt-on upgrade that reduces bump steer and front-end vibration for 2005–2024 Ford Super Duty trucks fitted with 2\"–8\" lifts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you fit larger wheels, tires, or lift your Super Duty, the factory steering setup can start to transmit more shock, shimmy, and uneven pull to the wheel and suspension parts. The V2 Dual Stabilizer replaces the stock unit with a high-flow, precision piston and a robust aluminum body to tame impact feedback, protect steering components, and deliver a smoother, more controlled driving feel both on- and off-road.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the V2 stabilizer improve steering control?\u003c\/h3\u003e\n\u003cp\u003eThe V2 stabilizer uses a larger internal piston and hardened rod to increase damping force over the factory unit. That means quicker absorption of sudden hits and less steering wheel vibration. You’ll notice reduced wandering and a firmer feel when travelling over rough surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e46mm high-flow piston for stronger dampening response\u003c\/li\u003e\n  \u003cli\u003e18mm chrome-hardened piston rod for rigid, consistent operation\u003c\/li\u003e\n  \u003cli\u003eMinimizes bump steer and sudden feedback into the steering wheel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the V2 durable enough for lifted and off-road use?\u003c\/h3\u003e\n\u003cp\u003eYes — the stabilizer is built for demanding conditions. Its T6061 brushed aluminum housing with black anodized accents resists corrosion and sheds heat faster than standard materials, while internal components are engineered for long service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6061 aluminum body for strength and improved heat dissipation\u003c\/li\u003e\n  \u003cli\u003ePrecision-machined internals designed for repeated heavy impacts\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish keeps the unit looking and performing well\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installation require special tools or vehicle modifications?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a straightforward bolt-on process that doesn’t require frame cutting or welding. Most experienced DIYers can complete the swap with basic hand tools, and Rough Country’s mounting hardware is included to match your lifted Super Duty’s geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% bolt-on design — no drilling or welding required\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting hardware compatible with 2\"–8\" lift heights\u003c\/li\u003e\n  \u003cli\u003eFast install time compared with complex steering upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and fitment details should I know?\u003c\/h3\u003e\n\u003cp\u003eThe V2 is covered by Rough Country’s 3-year replacement warranty against manufacturing defects, offering protection for structural and workmanship issues. Note: this kit is not intended for stock-height trucks and fits only Super Duty models with 2\"–8\" of lift.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3-year replacement warranty for defects in materials and workmanship\u003c\/li\u003e\n  \u003cli\u003eSpecifically fits 2005–2024 Ford Super Duty with 2\"–8\" lift kits\u003c\/li\u003e\n  \u003cli\u003eNot compatible with stock ride-height models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Rough Country V2 Dual Steering Stabilizer is aimed at owners of 2005–2024 Ford Super Duty trucks who have installed or plan to run 2\"–8\" of lift and larger wheel-and-tire packages. It’s ideal for drivers who want to reduce steering shake, protect tie rods and ball joints from excessive wear, and achieve a more composed on- and off-road driving experience without complex modifications. If you’re upgrading suspension or increasing tire size and want a reliable, performance-oriented steering dampener, the V2 is a practical, durable choice backed by a multi-year warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the V2 stabilizer fit my stock-height Super Duty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The V2 is designed for Super Duty trucks with 2\"–8\" of lift and will not fit stock-height models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is the warranty on the V2 Dual Stabilizer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Rough Country provides a 3-year replacement warranty against manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67585598226617,"sku":"B0CKXZTXBY","price":626.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-v2-front-packaging.jpg?v=1790473659"},{"product_id":"maxpeedingrods-dual-steering-stabilizer-for-jeep-wrangler-jk-jku-2-8-lift-dual-damper-powder-coated-steel","title":"maXpeedingrods Dual Steering Stabilizer for Jeep Wrangler JK\/JKU 2-8\" Lift — Dual-damper, Powder-Coated Steel","description":"\u003cstrong\u003emaXpeedingrods Dual Steering Stabilizer is a heavy-duty shock absorber kit designed to tame steering feedback and reduce vibration on 2–8\" lifted Jeep Wrangler JK and JKU models.\u003c\/strong\u003e\n\n\u003cp\u003eIf you’ve lifted a Jeep Wrangler JK (2007–2018) or the Unlimited JKU (2007–2010 2WD and 2007–2018 4WD), a dual steering stabilizer helps restore steering control, minimize bump steer, and cut down on wheel shimmy. This maXpeedingrods kit pairs two steel dampers with natural rubber bushings and a corrosion-resistant powder coat, delivering a balance of durability and noise isolation for street and trail use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this stabilizer improve steering on a lifted Wrangler?\u003c\/h3\u003e\n\u003cp\u003eBy adding damping force to the steering linkage, the dual stabilizers absorb shocks transmitted from rough surfaces and reduce rapid side-to-side feedback. That steadier response makes highway tracking and low-speed trail maneuvers more predictable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpecifically engineered for 2–8\" lift heights to match altered geometry.\u003c\/li\u003e\n  \u003cli\u003eTravel range 164 mm (6.46\"); extended 515 mm (20.28\"); collapsed 351 mm (13.82\").\u003c\/li\u003e\n  \u003cli\u003eDual-damper setup distributes load and limits single-point failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction keep these stabilizers reliable?\u003c\/h3\u003e\n\u003cp\u003eEach damper body is formed from high-strength steel and finished with an anti-corrosion powder coat to resist road grit and moisture. The mounting points use natural rubber bushings that quiet noise and damp harshness without making the steering feel dead.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePowder-coated steel for rust resistance and longevity.\u003c\/li\u003e\n  \u003cli\u003eNatural rubber bushings that reduce noise, vibration, and harshness (NVH).\u003c\/li\u003e\n  \u003cli\u003eRobust seals and internal valving designed for consistent damping action.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward and what support is available?\u003c\/h3\u003e\n\u003cp\u003eThe kit is engineered for direct-fit on compatible JK\/JKU models and includes hardware to simplify installation. A downloadable PDF installation manual walks through step-by-step procedures, and maXpeedingrods offers one year of warranty coverage plus ongoing technical support if you need help.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrintable PDF installation guide available for reference.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit application minimizes modification on compatible model years.\u003c\/li\u003e\n  \u003cli\u003eOne-year warranty and unlimited technical customer support from maXpeedingrods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this stabilizer affect ride comfort or steering feel?\u003c\/h3\u003e\n\u003cp\u003eThe goal of the dual stabilizer design is to reduce unwanted movement while preserving natural steering feedback. You should notice less wheel wobble and fewer vibrations through the steering wheel, especially at highway speeds or over washboard surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces wheel shimmy and high-frequency steering vibration.\u003c\/li\u003e\n  \u003cli\u003eMaintains responsive steering input for on-road control.\u003c\/li\u003e\n  \u003cli\u003eDesigned to complement lifted suspension geometry between 2\" and 8\" lifts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This maXpeedingrods Dual Steering Stabilizer kit is aimed at Jeep Wrangler JK and JKU owners who have installed 2–8\" lifts and want improved steering stability for street driving and off-road use. It suits weekend trail riders, daily drivers with lifted Jeeps, and mechanics or DIY enthusiasts seeking a durable, direct-fit upgrade with available installation guidance and manufacturer support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Jeep models and lift heights are compatible?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Jeep Wrangler JK 2007–2018 and JKU 2007–2010 (2WD) \/ 2007–2018 (4WD) for 2–8\" lifts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty and support come with this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: maXpeedingrods provides a 1-year manufacturing warranty and unlimited technical support.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"maXpeedingrods","offers":[{"title":"Default Title","offer_id":67585600192697,"sku":"B0GQLF5KWK","price":332.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/maxpeedingrods-front-packaging-jeep-wrangler-jk.jpg?v=1790473774"},{"product_id":"ugfc-power-steering-pump-20-8740-for-silverado-suburban-gmc-yukon-direct-fit-oe-replacement-restores-steering-assist","title":"UGFC Power Steering Pump 20-8740 for Silverado\/Suburban\/GMC Yukon — Direct-Fit OE Replacement, Restores Steering Assist","description":"\u003cp\u003e\u003cstrong\u003eThe UGFC Power Steering Pump 20-8740 is a direct-fit replacement pump engineered to restore smooth steering response for Chevy, GMC, Cadillac and Hummer vehicles covered by its fitment list.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle is showing heavy or inconsistent steering feel, a worn power steering pump can be the culprit. This UGFC 20-8740 unit is built to match OE form, fit and function for a range of late-90s through mid-2010s trucks and SUVs. The following details explain what it fits, how it helps, and what to check before buying so you can get a correct, reliable swap without guesswork.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does the UGFC 20-8740 fit?\u003c\/h3\u003e\n\u003cp\u003eThis pump covers many full-size GM trucks and SUVs. It fits a wide selection of Chevrolet, GMC, Cadillac and Hummer models across overlapping model years. Always cross-check your VIN and original part number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCadillac Escalade\/ESV and Escalade EXT from the 2007–2014 and 2007–2013 ranges respectively\u003c\/li\u003e\n  \u003cli\u003eGMC Sierra 1500 and Yukon\/Yukon XL 1500 from 1999–2014 model years\u003c\/li\u003e\n  \u003cli\u003eChevrolet Silverado 1500, Avalanche and Suburban\/Tahoe from as early as 1996 through 2014 depending on model\u003c\/li\u003e\n  \u003cli\u003eSelected heavy-duty C\/K 2500 variants and Hummer H2 (2008–2009)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this pump affect steering performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a degraded pump with the UGFC 20-8740 helps restore hydraulic assist to the steering system, reducing effort at low speeds and improving return-to-center feel. It’s designed to replicate the original pump’s pressure characteristics so steering geometry and rack\/pinion behavior remain consistent.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReestablishes correct hydraulic pressure for predictable steering effort\u003c\/li\u003e\n  \u003cli\u003eReduces whining or groaning noises caused by failing internal components\u003c\/li\u003e\n  \u003cli\u003eImproves maneuverability in parking and low-speed turns\u003c\/li\u003e\n  \u003cli\u003eInterfaces with stock pulley, hose, and mounting points for a direct-fit swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering a replacement pump?\u003c\/h3\u003e\n\u003cp\u003eConfirming compatibility avoids returns and installation delays. Verify your vehicle’s year, make, model, engine type and original pump part number where possible. Also inspect pulley size, reservoir style and mounting pattern to ensure interchangeability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare the OEM part number to 20-8740 or consult a parts database\u003c\/li\u003e\n  \u003cli\u003eNote engine\/transmission options that may affect pump variants\u003c\/li\u003e\n  \u003cli\u003eCheck pulley and shaft design, and hose connection locations\u003c\/li\u003e\n  \u003cli\u003eGather tools and replacement O-rings or seals before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support comes with this UGFC pump?\u003c\/h3\u003e\n\u003cp\u003eUGFC offers customer service and technical assistance to help with fitment questions or installation guidance. If you encounter uncertainty during selection or removal, reach out to their technical team for clarification so you install the correct unit confidently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccess to technical support for fitment and troubleshooting\u003c\/li\u003e\n  \u003cli\u003eAdvice on fluid type, bleeding procedure and torque specs\u003c\/li\u003e\n  \u003cli\u003eGuidance on compatible hoses, pulleys and mounting fasteners\u003c\/li\u003e\n  \u003cli\u003eReturn and warranty policies clarified through seller communication\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The UGFC Power Steering Pump 20-8740 is aimed at DIY mechanics and professional shops replacing a failed or noisy power steering pump on applicable Chevy, GMC, Cadillac or Hummer models. It suits owners who need a direct-fit replacement that matches original mounting and hydraulic behavior, restoring low-speed assist and steering precision without modifying the steering system. Before purchase, make sure the pump matches your vehicle’s year and configuration to guarantee a seamless installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does UGFC 20-8740 fit my 2009 Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 20-8740 covers many 1999–2013 Silverado 1500 models; verify engine and OEM part number to confirm fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need extra parts to install this pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You may need replacement O-rings, mounting bolts or a matching pulley; check hose fittings and seal condition during swap.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"UGFC","offers":[{"title":"Default Title","offer_id":67585608614073,"sku":"B0BBYYLGPP","price":217.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ugfc-power-steering-pump-front-view.jpg?v=1790474164"},{"product_id":"rough-country-n3-steering-stabilizer-conversion-kit-for-2007-2018-jeep-wrangler-jk-chrome-hardened-piston-heavy-duty-damping","title":"Rough Country N3 Steering Stabilizer Conversion Kit for 2007–2018 Jeep Wrangler JK — Chrome‑hardened piston, heavy‑duty damping","description":"\u003cp\u003e\u003cstrong\u003eThe Rough Country N3 Steering Stabilizer Conversion Kit (8731830) upgrades 2007–2018 Jeep Wrangler JK steering with a heavy-duty, chrome-hardened piston design to reduce vibration and improve control.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered as a direct-fit conversion for 07–18 Jeep JK models, this N3 kit replaces the factory steering damper to give your Wrangler a firmer, more predictable steering feel both on- and off-road. It targets common steering issues—bump steer, wandering, and excess vibration—while being backed by Rough Country's limited lifetime replacement warranty for long-term ownership confidence.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit improve Jeep JK steering performance?\u003c\/h3\u003e\n\n\u003cp\u003eThe N3 conversion dampens steering inputs and road shock more effectively than stock components, delivering steadier handling on rough surfaces and highway travel. Its upgraded internals and piston reduce oscillations that can transmit through the steering system.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eChrome-hardened 18mm piston rod for greater strength and wear resistance\u003c\/li\u003e\n  \u003cli\u003eStiffer damping to prevent quick steering kickback from rough terrain\u003c\/li\u003e\n  \u003cli\u003eImproved feedback for controlled wheel inputs while cornering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this reduce tire wear and suspension stress?\u003c\/h3\u003e\n\n\u003cp\u003eYes—by cutting down vibration and uncontrolled steering movement, the kit helps lessen uneven tire wear and decreases strain on ball joints and tie rod ends. That can extend component life and reduce maintenance intervals when used with proper alignment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMinimizes bump steer that causes premature tire edge wear\u003c\/li\u003e\n  \u003cli\u003eReduces repeated stress on steering linkage components\u003c\/li\u003e\n  \u003cli\u003eHelps maintain consistent tire contact for more even wear patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation on a 2007–2018 Jeep Wrangler JK?\u003c\/h3\u003e\n\n\u003cp\u003eThe conversion kit is designed for direct replacement of the factory steering damper and fits the JK steering geometry without major modifications. Installation is bolt-on for experienced DIYers and shops; torque specs and mounting points align with OEM locations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect-fit parts tailored for 07–18 Jeep JK models\u003c\/li\u003e\n  \u003cli\u003eUses existing mounting points—no custom brackets required\u003c\/li\u003e\n  \u003cli\u003eCommonly completed in a couple of hours by a technician\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and warranty protect my investment?\u003c\/h3\u003e\n\n\u003cp\u003eThe N3 uses durable materials like a chrome-hardened 18mm piston rod to resist bending and corrosion under repeated load. Rough Country backs the component with a limited lifetime replacement warranty, adding coverage against manufacturing defects.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eChrome-hardened piston for long-term durability\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty construction suited for daily driving and off-road use\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime replacement warranty from Rough Country\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Rough Country N3 Steering Stabilizer Conversion Kit is aimed at Jeep Wrangler JK owners (2007–2018) who want a durable, performance-oriented upgrade to tame steering vibration, improve on- and off-road control, and protect related steering and suspension components. It's ideal for daily drivers seeking a firmer highway feel and off-road enthusiasts who need reliable steering stability under demanding conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit compatible with all 2007–2018 Jeep JK models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 8731830 N3 conversion kit is a direct-fit for 2007–2018 Jeep Wrangler JK models without major modifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation typically take?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Professional installation usually takes around 1–2 hours; experienced DIYers may complete it in a similar timeframe with standard tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67586256896185,"sku":"B07D3BNXZL","price":137.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-front-view-steering-stabilizer.jpg?v=1790481710"},{"product_id":"rough-country-n3-steering-stabilizer-for-2018-2024-jeep-jl-jt-direct-fit-nitrogen-charged-dampener","title":"Rough Country N3 Steering Stabilizer for 2018-2024 Jeep JL\/JT — Direct-Fit Nitrogen-Charged Dampener","description":"\u003cp\u003e\u003cstrong\u003eRough Country's N3 Steering Stabilizer (part 8730530) is a direct-fit dampener that reduces steering vibration and bump steer on 2018–2024 Jeep JL and JT models for a smoother, more controlled drive.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Jeep Wrangler JL or Gladiator JT feels twitchy on rough roads or you notice excessive vibration through the steering wheel, the N3 Steering Stabilizer is engineered to help stabilize steering inputs and improve tracking. This bolt-on unit is built to mount in the factory location and deliver consistent damping whether you're driving on pavement, rock crawling, or on the highway. Backed by Rough Country’s limited lifetime replacement warranty, it’s a practical upgrade for drivers who want a reliable, service-minded steering solution.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the N3 stabilizer improve steering feel?\u003c\/h3\u003e\n\u003cp\u003eThe N3 uses tuned damping to absorb sudden inputs and road shock before they translate into steering wheel kickback. That controlled resistance helps minimize the quick lateral movements that can make a lifted or heavy-front Jeep feel unsettled.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-pressure nitrogen charge for consistent damping response\u003c\/li\u003e\n  \u003cli\u003ePrecision valving tuned for JL\/JT steering dynamics\u003c\/li\u003e\n  \u003cli\u003eReduces vibration transmitted to the steering wheel and chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it reduce tire wear and component stress?\u003c\/h3\u003e\n\u003cp\u003eBy limiting excessive steering feedback and bump steer, the stabilizer helps parts last longer and promotes more even tire contact with the road. Less oscillation means reduced strain on ball joints, tie rods, and other steering components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDecreases rapid lateral movement that accelerates tire edge wear\u003c\/li\u003e\n  \u003cli\u003eReduces shock loads on steering linkages and suspension bushings\u003c\/li\u003e\n  \u003cli\u003eHelps maintain alignment settings over rough terrain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and does it fit my Jeep?\u003c\/h3\u003e\n\u003cp\u003eThe unit is a direct-fit replace­ment for 2018–2024 Jeep Wrangler JL and Gladiator JT steering setups and installs with basic hand tools. Rough Country provides installation support and hardware; the bolt-on design means no cutting or permanent modifications are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement for factory stabilizer location on JL and JT models\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting hardware and straightforward torque specs\u003c\/li\u003e\n  \u003cli\u003eInstallation typically completed with common garage tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and warranty coverage does this part have?\u003c\/h3\u003e\n\u003cp\u003eThe N3 stabilizer is built for off-road and street use with components selected for long service life under load. It’s supported by Rough Country’s limited lifetime replacement warranty, providing added confidence for owners who use their Jeeps in demanding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRugged construction to resist wear from repeated impacts and use\u003c\/li\u003e\n  \u003cli\u003eSeals and mounts designed to keep contaminants out and performance consistent\u003c\/li\u003e\n  \u003cli\u003eBacked by Rough Country limited lifetime replacement warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Rough Country N3 Steering Stabilizer (8730530) is ideal for Jeep JL and JT owners who want a reliable, direct-fit upgrade to reduce steering vibration, protect steering components, and improve on‑ and off‑road handling. It’s especially useful for drivers with lifted Jeeps, larger tire packages, or those who frequently encounter rough roads and trail conditions but want a straightforward bolt-on solution without major modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the N3 stabilizer fit 2019–2021 Jeep JL models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Rough Country N3 stabilizer is a direct fit for 2018–2024 Jeep Wrangler JL and Gladiator JT models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need to modify my Jeep to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modifications required—the part bolts into the factory location and includes mounting hardware for a straightforward install.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67586262007993,"sku":"B07DPBY1C5","price":137.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-n3-stabilizer-front-view_7f3304f4-a797-4f4e-92bb-05d2d045fbfc.jpg?v=1790481824"},{"product_id":"geluoxi-power-steering-pump-20-2403-for-gm-suvs-traverse-acadia-enclave-direct-fit-oem-reference","title":"GELUOXI Power Steering Pump 20-2403 for GM SUVs (Traverse, Acadia, Enclave) — Direct-Fit, OEM Reference","description":"\u003cb\u003eGELUOXI 20-2403 is a direct-fit replacement power steering pump designed to restore smooth hydraulic steering performance for compatible GM SUVs and crossovers.\u003c\/b\u003e\n\n\u003cp\u003eThis replacement unit is built to match the original equipment fitment and mounting points for a range of General Motors vehicles, making it a practical swap when your factory pump shows noise, leaks, or reduced steering assist. It is offered as a ready-to-install component that accepts standard lines and pulleys where applicable, and is supplied with the OEM reference numbers most technicians use to confirm compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does this pump fit?\u003c\/h3\u003e\n\u003cp\u003eThe GELUOXI 20-2403 is intended for multiple model years and engines across GM mid-size SUVs and crossovers. Check the OEM part numbers and engine size to confirm match before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuick Enclave — all models 2008–2013\u003c\/li\u003e\n  \u003cli\u003eChevy Equinox 3.6L — model years 2008–2009\u003c\/li\u003e\n  \u003cli\u003eChevy Traverse — all models 2009–2013\u003c\/li\u003e\n  \u003cli\u003eGMC Acadia — all models 2007–2013\u003c\/li\u003e\n  \u003cli\u003ePontiac Torrent 3.6L — model years 2008–2009\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I verify it’s the correct replacement for my car?\u003c\/h3\u003e\n\u003cp\u003eConfirming fitment requires comparing the OEM or aftermarket reference numbers and the vehicle engine spec. The GELUOXI unit lists multiple OEM numbers used across GM parts catalogs to help technicians match the pump to the original item.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-reference listed OEM part numbers: 25897549, 25938259, 25939259, 25964298, 26976855, 491007, 14243011\u003c\/li\u003e\n  \u003cli\u003eVerify vehicle make, model, year, and engine (e.g., 3.6L where specified)\u003c\/li\u003e\n  \u003cli\u003eCompare mounting points and pulley type with the existing pump during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and performance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard removal and replacement of the original power steering pump. The GELUOXI 20-2403 is manufactured to align with factory mounting and hydraulic connections, simplifying the swap for DIYers and pros alike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace with engine off, fluid drained, and lines disconnected per vehicle service manual\u003c\/li\u003e\n  \u003cli\u003eBleed the steering system after installation to remove air and ensure consistent assist\u003c\/li\u003e\n  \u003cli\u003eListen for smooth, consistent pump operation without whine or chatter under normal loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts and procedures should I consider when replacing the pump?\u003c\/h3\u003e\n\u003cp\u003eWhen replacing a power steering pump, it’s good practice to inspect related components and use proper fluids to maximize service life and avoid repeat work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect hoses, seals, and steering rack for leaks or wear\u003c\/li\u003e\n  \u003cli\u003eReplace the serpentine belt or pulley if worn or damaged\u003c\/li\u003e\n  \u003cli\u003eRefill with manufacturer-recommended power steering fluid and follow bleeding steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The GELUOXI 20-2403 power steering pump is aimed at technicians, automotive shops, and confident DIY owners who need a reliable direct-fit replacement for mid-size GM SUVs and crossovers produced between 2007 and 2013. It is especially useful for repairs where OEM part numbers match one of the references listed, and for anyone seeking a component that simplifies installation by aligning with factory mounting and connection points. Always confirm fitment with vehicle specifics and consult repair manuals for torque specs and safe installation procedures.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump fit my 2010 Chevy Traverse?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the GELUOXI 20-2403 covers Chevy Traverse models 2009–2013. Verify your engine and OEM part number to be certain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are OEM part numbers included for compatibility checks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the listing includes OEM references like 25897549, 25938259, 25939259 and others for cross-checking.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GELUOXI","offers":[{"title":"Default Title","offer_id":67586263122105,"sku":"B088YT9G83","price":156.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/geluoxi-pump-front-view.jpg?v=1790481854"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/rough-country-front-packaging.jpg?v=1794521490","url":"https:\/\/redleafauto.ca\/collections\/power-steering-parts.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}