{"title":"Ram Parts \u0026 Accessories","description":"\u003cp\u003e1,115 parts and accessories listed for Ram vehicles, including body \u0026amp; trim parts, headlight \u0026amp; tail light assemblies and oil, air, cabin \u0026amp; fuel filters. Each listing names the models and years it fits — check yours against the compatibility details before ordering.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eRedLeaf Auto is an independent retailer and is not affiliated with or endorsed by Ram. Brand names are used only to describe vehicle compatibility.\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"ksp-performance-wheel-spacers-6x139-7-1-5in-forged-hubcentric-77-8mm-bore-4pcs-for-ram-1500-jeep-grand-wagoneer","title":"KSP PERFORMANCE wheel spacers 6x139.7 1.5in — forged hubcentric 77.8mm bore, 4pcs for Ram 1500 \u0026 Jeep Grand Wagoneer","description":"\u003cp\u003e\u003cstrong\u003eKSP 1.5-inch forged, hubcentric wheel spacers adapt 6x139.7 wheels to 77.8mm hubs on Ram 1500 (2019–2026) and Jeep Grand Wagoneer (2021–2026) for improved fitment and stance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese KSP PERFORMANCE spacers are engineered to move wheels outward by 1.5 inches, solving fender clearance and upper control arm rubbing while keeping wheels perfectly centered on the hub. Machined from forged 6061-T6 aluminum and fitted with heat-treated 10.9-grade bolts, the kit emphasizes durability, precise fit, and a smoother driving feel compared with many cast alternatives. The hubcentric lip aligns with a 77.8mm factory hub to minimize vibration, and the bolt-on installation is straightforward for anyone familiar with basic wheel service.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers eliminate rubbing on my Ram 1500 during suspension movement?\u003c\/h3\u003e\n\u003cp\u003eYes — for many owners, moving the wheel 1.5 inches outwards resolves contact between the tire and the upper control arm or fender flare. Because the spacer shifts the wheel’s mounting face, it increases clearance at commonly rubbing points without changing tire size.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.5-inch offset increases distance between tire and suspension components\u003c\/li\u003e\n  \u003cli\u003eForged aluminum maintains structural integrity under load\u003c\/li\u003e\n  \u003cli\u003eCheck factory stud length—excessive stud protrusion may require trimming\u003c\/li\u003e\n  \u003cli\u003eTorque spec: 85–95 ft·lb for secure installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the hubcentric design affect ride quality and vibration?\u003c\/h3\u003e\n\u003cp\u003eThese spacers feature a machined lip that centers the wheel on the factory hub bore, which reduces the chance of wheel runout and associated vibrations at highway speeds. Proper hubcentric seating preserves the wheel-to-hub contact that manufacturers design into OEM setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e77.8mm hub bore matches factory hubs for reliable centering\u003c\/li\u003e\n  \u003cli\u003eHub-centric fit minimizes high-speed shaking compared to non-centered spacers\u003c\/li\u003e\n  \u003cli\u003eEven clamping distributes load across the hub and wheel mounting surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these spacers strong enough for heavy-duty truck use?\u003c\/h3\u003e\n\u003cp\u003eYes — KSP uses forged 6061-T6 aluminum for the spacer body and supplies heat-treated 10.9-grade bolts to secure wheels, offering higher toughness than typical cast parts. The kit is intended for street and light-duty towing\/hauling when installed and torqued correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged aluminum resists cracking better than many cast alternatives\u003c\/li\u003e\n  \u003cli\u003e10.9-grade bolts provide increased shear and tensile strength\u003c\/li\u003e\n  \u003cli\u003eRecommended torque range: 85–95 ft·lb for the lug studs\u003c\/li\u003e\n  \u003cli\u003eInspect factory stud length before installation; cut if over 38mm exposed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fitment and installation details should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eFitment depends on bolt pattern, hub bore, and stud thread size: this kit is 6x139.7 (6x5.5) with a 77.8mm center bore and M14x1.5 lug studs. Confirm your truck’s hub diameter and factory stud length to ensure compatibility and safe installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirmed fit: Ram 1500 model years 2019–2026 and Jeep Grand Wagoneer 2021–2026\u003c\/li\u003e\n  \u003cli\u003eStuds: M14x1.5, check maximum exposed length before installation\u003c\/li\u003e\n  \u003cli\u003eIf factory studs extend beyond 38mm, trimming is required for safe fit\u003c\/li\u003e\n  \u003cli\u003eTorque wheels to 85–95 ft·lb and recheck after initial road miles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These spacers suit Ram 1500 and Jeep Grand Wagoneer owners who want to correct rubbing, widen their truck’s stance, or achieve a flush wheel fitment without changing wheel offsets or tires. They’re aimed at drivers who prefer durable forged components and a hubcentric solution to preserve ride smoothness. If you need a bolt-on, reversible way to gain clearance and a more aggressive look while maintaining OEM-style centering, this KSP PERFORMANCE 1.5-inch spacer kit is a practical option. Remember to verify hub bore, stud thread, and stud length before purchase and follow the recommended torque procedure for safety.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these spacers fit my 2020 Ram 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they fit Ram 1500 model years 2019–2026 with 6x139.7 bolt pattern and 77.8mm hub bore.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to trim my factory studs before installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Trim only if your factory studs extend more than 38mm; otherwise no cutting is necessary.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584843186361,"sku":"B083FD9Q3G","price":319.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-front-view-packaging-spacers.jpg?v=1790456256"},{"product_id":"ksp-performance-ram-1500-5x5-5-wheel-spacers-1-5-thick-4-pack-forged-6061-t6-m14x1-5-studs-black","title":"KSP PERFORMANCE Ram 1500 5x5.5 Wheel Spacers 1.5\" Thick (4-Pack) — Forged 6061-T6, M14x1.5 Studs, Black","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE 5x5.5 wheel spacers are 1.5\" thick forged aluminum adapters that safely move your Ram 1500's wheels outward to improve clearance, stance and stability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your 2012–2018 Dodge Ram 1500 or 2019+ Ram 1500 Classic (5-lug) is experiencing tire rubbing, needs a wider track for stability, or you simply want a more aggressive look, these 4-pack spacers were designed specifically to fit that application. Built from forged 6061-T6 aluminum with black anodizing and hardened M14x1.5 studs, the kit balances strength and weight savings while keeping installation straightforward for anyone comfortable with basic wheel work.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eThey are intended for 5-lug Ram 1500 models with a 5x5.5\" (5x139.7mm) bolt pattern and a 77.8mm hub bore. Confirm year and wheel specifications before buying to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2012–2018 Ram 1500 (2WD \u0026amp; 4WD).\u003c\/li\u003e\n  \u003cli\u003eAlso fits 2019+ Ram 1500 Classic with five lugs.\u003c\/li\u003e\n  \u003cli\u003eBolt pattern: 5x5.5\" (5x139.7mm); hub bore: 77.8mm.\u003c\/li\u003e\n  \u003cli\u003eSpacer thickness: 1.5\" (38.1mm); thread pitch: M14x1.5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these spacers affect handling and clearance?\u003c\/h3\u003e\n\u003cp\u003eMoving the wheels outward by 1.5\" increases track width and tire clearance, which often reduces rubbing and improves vehicle stability during cornering. The wider stance can also change steering feel; proper installation and torque are essential for predictable handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWider track improves lateral stability at speed.\u003c\/li\u003e\n  \u003cli\u003eExtra clearance for larger tires or suspension travel.\u003c\/li\u003e\n  \u003cli\u003eMay alter steering feedback—professional alignment recommended after installation.\u003c\/li\u003e\n  \u003cli\u003eRecommended torque: 85–95 ft\/lbs; thread locker included for security.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are included, and how durable are they?\u003c\/h3\u003e\n\u003cp\u003eThe spacers are CNC-forged from 6061-T6 aluminum for a high strength-to-weight ratio, finished with black anodizing to resist corrosion. Studs are Grade 10.9 geomet hardware tested for strength and durability; the kit includes four spacers and engineered fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged 6061-T6 aluminum construction for lightness and strength.\u003c\/li\u003e\n  \u003cli\u003eBlack anodized surface for corrosion resistance and appearance.\u003c\/li\u003e\n  \u003cli\u003eGrade 10.9 geomet studs (SGS tested) to reduce vibration and lug stress.\u003c\/li\u003e\n  \u003cli\u003eThread locker supplied to secure studs during fastening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these wheel spacers?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires removing the wheel, mounting the spacer to the hub, torquing the spacer studs to spec, then reinstalling the wheel. Re-check wheel torque after the first 50–100 miles and periodically thereafter. If in doubt, have a qualified technician perform the fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall on clean hub surface; use supplied thread locker.\u003c\/li\u003e\n  \u003cli\u003eTighten spacer studs to 85–95 ft\/lbs as recommended.\u003c\/li\u003e\n  \u003cli\u003eRe-torque wheel nuts after 50–100 miles and at routine intervals.\u003c\/li\u003e\n  \u003cli\u003eInspect for corrosion or loosened hardware during periodic maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These KSP PERFORMANCE spacers are aimed at Ram 1500 owners who need resolved tire rubbing, want a wider stance for improved stability, or prefer an enhanced, aggressive look without the weight penalty of steel adapters. They suit DIYers comfortable with wheel work and professional installers seeking a durable, vehicle-specific spacer with reliable hardware and manufacturer support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers fit a 2015 Ram 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your 2015 Ram 1500 has a 5x5.5\" bolt pattern and 77.8mm hub bore, these spacers will fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if you have basic wheel installation tools and follow torque specs; otherwise use a professional installer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584843219129,"sku":"B085WR3J77","price":313.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-spacer-front-view.jpg?v=1790456254"},{"product_id":"ksp-performance-adjustable-forged-upper-control-arms-for-ram-1500-2009-2022-2-4-lift-t6-aluminum-greasable-ball-joints","title":"KSP PERFORMANCE Adjustable Forged Upper Control Arms for Ram 1500 2009-2022 — 2–4\" Lift, T6 Aluminum \u0026 Greasable Ball Joints","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE forged one-piece aluminum adjustable upper control arms replace OEM arms for 2–4\" lifted Dodge\/Ram 1500 trucks, offering corrosion resistance, serviceable greasable ball joints, and stronger-than-stock geometry.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese upper control arms are engineered for Ram 1500 owners who have added 2 to 4 inches of lift using spacers or extended struts\/shocks. Constructed from T6 forged aluminum with precision CNC machining and magnetic particle inspection, each arm is built without welds to reduce weak points and prevent rust. Serviceable greasable ball joints, zinc-nickel coated pins, and polyurethane bushings give better durability and improved handling over worn stock components or inexpensive replacements.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms improve a lifted Ram 1500's front-end geometry?\u003c\/h3\u003e\n\u003cp\u003eAdjustable arms restore proper ball joint angle and caster after a 2–4\" lift, helping steering return and reducing premature tire wear. The increased ball joint articulation accommodates lift travel so the suspension operates within designed ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable length to correct caster and camber for lifted setups\u003c\/li\u003e\n  \u003cli\u003eGreater range of motion than OEM ball joints for lift applications\u003c\/li\u003e\n  \u003cli\u003eOne-piece forged design maintains alignment under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and features prevent corrosion and wear?\u003c\/h3\u003e\n\u003cp\u003eArms are forged from T6 aluminum and CNC-machined to eliminate weld seams, minimizing corrosion points. Ball joint pins receive a zinc-nickel coating, and dust boots plus KSP protective covers keep contaminants away for longer service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eT6 forged aluminum resists rust and is lighter than steel\u003c\/li\u003e\n  \u003cli\u003eZinc-nickel coated, heat-treated ball joint pins for extended life\u003c\/li\u003e\n  \u003cli\u003eGreasable sockets and tower-style dust boots for easy maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these control arms serviceable and easier to maintain?\u003c\/h3\u003e\n\u003cp\u003eYes — greasable ball joints allow you to flush contaminants and replenish lubricant, reducing corrosion and wear. Polyurethane bushings with lubrication grooves preserve responsiveness while resisting temperature-related deterioration better than rubber.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGreasable fittings let you inject fresh lubricant on schedule\u003c\/li\u003e\n  \u003cli\u003ePolyurethane bushings improve steering feedback and noise control\u003c\/li\u003e\n  \u003cli\u003eKSP protective covers reduce debris contact with the joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Ram 1500 model years and lift types are compatible?\u003c\/h3\u003e\n\u003cp\u003eThese arms are made for 2009–2010 Dodge Ram 1500 and 2011–2022 Ram 1500 trucks equipped with 2–4\" lifts that use lift spacers or extended struts\/shocks. They are not compatible with kits that raise the steering knuckles and rely on OEM upper arms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Dodge Ram 1500 (2009–2010) and Ram 1500 (2011–2022)\u003c\/li\u003e\n  \u003cli\u003eCompatible with lift systems using spacers or extended struts\/shocks\u003c\/li\u003e\n  \u003cli\u003eNot compatible with full 4\" lift kits that require raised knuckles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These KSP PERFORMANCE upper control arms suit Ram 1500 owners who need a durable, serviceable upgrade for 2–4\" lifted trucks. Choose them if you want rust-resistant forged aluminum construction, adjustable geometry to correct lift-induced alignment issues, and greasable, zinc-nickel coated ball joints with polyurethane bushings for longer life and improved steering response. If your setup uses raised knuckles or a full 4\" lift that depends on OEM-style arms, select a product designed for that specific kit instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these work with a full 4\" lift kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These arms are NOT compatible with full 4\" lift kits that use raised steering knuckles designed for OEM upper arms.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Ram 1500 years are supported?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Compatible with 2009–2010 Dodge Ram 1500 and 2011–2022 Ram 1500 when using lift spacers or extended struts\/shocks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584859177145,"sku":"B0CJB7TL7K","price":718.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-upper-control-arm-front-packaging.jpg?v=1790456707"},{"product_id":"hayiauto-alternator-11240-160a-for-dodge-ram-1500-durango-12v-direct-fit-cnc-aluminum-housing","title":"HAYIAUTO Alternator 11240 160A for Dodge Ram 1500 Durango — 12V Direct-Fit, CNC Aluminum Housing","description":"\u003cp\u003e\u003cstrong\u003eHAYIAUTO 11240 (11240N) is a direct-fit 12V, 160A replacement alternator engineered to restore charging performance for compatible Dodge, Jeep, Chrysler and Ram models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle shows electrical warnings, dimming lights, or a failing battery after normal checks, the alternator is a likely cause. The HAYIAUTO 11240 alternator is built with a CNC-machined aluminum housing, a 6-groove pulley, clockwise rotation and an external regulator—designed to mirror OEM fit and function while delivering improved cooling and tested durability.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines does this alternator fit?\u003c\/h3\u003e\n\u003cp\u003eThe 11240 alternator matches a range of Chrysler, Dodge, Jeep and Ram models produced between 2007 and 2013. Compatibility is engine- and year-specific, so verify part numbers and OEM photos before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with 2007 Dodge Durango and Chrysler Aspen 4.7L V8 models.\u003c\/li\u003e\n  \u003cli\u003eFits Dodge Nitro (2007–2010) and Jeep Liberty (2007–2010) with 3.7L engines.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Ram 1500 3.7L and 4.7L variants across 2009–2013 ranges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 11240 alternator ensure reliable charging under load?\u003c\/h3\u003e\n\u003cp\u003eThis unit delivers 160 amps at 12 volts and includes precision-tested bearings, calibrated rotors\/stators, and voltage regulation designed to meet OEM performance. It undergoes load and heat-cycle testing to reduce risk of early failure under heavy electrical demand.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e160A output supports modern accessory loads and battery charging.\u003c\/li\u003e\n  \u003cli\u003eExternal regulator type for stable voltage control across driving conditions.\u003c\/li\u003e\n  \u003cli\u003eSealed rotors and secondary insulation to minimize short risks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build and quality features to expect?\u003c\/h3\u003e\n\u003cp\u003eHAYIAUTO uses high-grade aluminum castings and CNC machining to improve cooling, dimensional accuracy, and long-term wear resistance. Bearings and lubricants meet OEM-equivalent standards and each alternator is inspected and tested before shipping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined housing for consistent fit and better heat dissipation.\u003c\/li\u003e\n  \u003cli\u003e6-groove pulley and internal fan to match factory pulley systems.\u003c\/li\u003e\n  \u003cli\u003eRigorous testing: voltage regulation, cycling, load and heat resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I confirm fitment and install this alternator?\u003c\/h3\u003e\n\u003cp\u003eConfirm compatibility by cross-referencing the listed part numbers (11240, 11240N, 56029914AD, etc.) with your vehicle’s OEM alternator. Installation is best handled by a qualified technician to ensure correct wiring, belt alignment and safe battery handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare your OEM part number to the supplied list before purchase.\u003c\/li\u003e\n  \u003cli\u003eInspect connector type and mounting ear orientation (main ear at 6 o’clock).\u003c\/li\u003e\n  \u003cli\u003eHave a professional install and test the charging system after replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this alternator for? Drivers and mechanics who need a durable, OEM-compatible replacement alternator for mid-2000s to early-2010s Dodge, Jeep, Chrysler and Ram vehicles will benefit from the HAYIAUTO 11240. It suits owners seeking a cost-effective, bench-tested alternator with standard OEM dimensions, a high 160A output for added electrical demand, and thorough factory testing. Always confirm vehicle fitment and consider professional installation for optimal performance and safety.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the HAYIAUTO 11240 alternator a direct replacement for OEM units?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's built to OEM dimensions and fittings, but confirm your vehicle's part number and connector type before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the output and rotation direction of this alternator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The alternator outputs 160A at 12V and has clockwise (CW) rotation with a 6-groove pulley.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HAYIAUTO","offers":[{"title":"Default Title","offer_id":67584862617785,"sku":"B0F8GFG74S","price":259.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/hayiauto-11240-front-view.jpg?v=1790456855"},{"product_id":"karsparehub-headlight-assembly-for-dodge-ram-1500-classic-2009-2012-direct-fit-uv-coated-sealed-lens","title":"KarSpareHub Headlight Assembly for Dodge Ram 1500 Classic (2009-2012) — Direct-Fit, UV-Coated Sealed Lens","description":"\u003cp\u003e\u003cstrong\u003eKarSpareHub headlights are direct-replacement headlamp assemblies engineered to restore factory fit, sealed weather resistance, and clear night visibility for select Dodge Ram Classic models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese headlight assemblies are produced to match OEM fit and function for specific Dodge Ram Classic pickups, offering a sealed lens, UV-resistant coating, and straightforward installation. They are intended as replacements for the original low\/high beam housings (OEM numbers include 55277409AD, 55277410) and are tested for compatibility with a range of Ram 1500, 2500 and 3500 Classic body styles. Built with a breathable base and a secure PUR adhesive seal, they resist moisture intrusion while protecting the lens from premature yellowing.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Dodge Ram models will these lights fit?\u003c\/h3\u003e\n\u003cp\u003eThese units are designed for specific Dodge Ram Classic body styles and adhere closely to the original mounting points and electrical connectors. They do not fit every Ram produced during the same years, so verifying model and headlight type is important before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2009–2012 Dodge Ram 1500 Classic body styles.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2010–2018 Dodge Ram 2500 and 3500 (Classic body style) models only.\u003c\/li\u003e\n  \u003cli\u003eFits 2009–2012 Ram trims such as ST, SLT, TRX, Laramie and Longhorn where Classic housings were used.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with factory projector LED style headlights, Quad Beam models, or 2010-up Ram projector housings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant are these headlamps?\u003c\/h3\u003e\n\u003cp\u003eDurability is engineered into the assembly through multi-layer protection and rigorous sealing procedures. The lens receives a UV optical coating to slow discoloration, while the housing uses a PUR adhesive seal and an air-tightness test to reduce the risk of leaks or fogging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed with industry-grade PUR adhesive and verified via 100% air-tightness inspection.\u003c\/li\u003e\n  \u003cli\u003eUV optical coating on the lens helps resist yellowing and clarity loss.\u003c\/li\u003e\n  \u003cli\u003eComposite base with a one-way breathable film to stabilize internal humidity and temperature.\u003c\/li\u003e\n  \u003cli\u003eMeets SAE guidelines for on-road use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I need to know about installation and bulbs?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward: these are direct-replacement assemblies that align with original mounting points and connectors. Only the low and high beam bulbs are included; any additional bulbs or accessories must be retained from the original unit or purchased separately.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for simplified bolt-on replacement — no cutting or modification required for compatible models.\u003c\/li\u003e\n  \u003cli\u003eIncludes assemblies with only low\/high beam bulb provisions; turn signal or parking bulbs may not be included.\u003c\/li\u003e\n  \u003cli\u003eCan be installed at home by a competent DIYer or by a professional at a repair shop.\u003c\/li\u003e\n  \u003cli\u003eReply \"DIY\" to request detailed installation guidance from the seller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and after-sale support are offered?\u003c\/h3\u003e\n\u003cp\u003eKarSpareHub backs these headlights with a limited coverage period to protect against defects arising from normal use. The warranty process requires order information and photographs to confirm the condition; a replacement or refund can be initiated if terms are met.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3-year coverage for damage occurring during normal use; terms detailed on the included warranty card.\u003c\/li\u003e\n  \u003cli\u003eHassle-free refund or replacement begins with your order number and photos of the issue.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment questions and post-sale assistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These KarSpareHub headlamps are aimed at owners of Dodge Ram Classic trucks (2009–2012 1500 and compatible 2500\/3500 Classic models) who want a like-for-like replacement with OEM-style fit, improved lens protection, and an airtight sealed housing. Choose these assemblies if you need dependable, factory-aligned headlights that resist moisture and UV damage and if you prefer a part that’s tested for correct alignment and mounting on eligible Ram Classic body styles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights fit 2013–2018 Dodge Ram models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit certain 2013–2018 Ram models only when the Classic body style and matching headlight housing are used; verify your vehicle’s body style first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included with the assemblies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only the low and high beam bulb locations are provided; additional bulbs or LEDs are not included and must be supplied separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KarSpareHub","offers":[{"title":"Default Title","offer_id":67584868778169,"sku":"B0D48MWVJD","price":281.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/karsparehub-headlight-front-assembly.jpg?v=1790456992"},{"product_id":"flexhitch-ram-1500-leveling-lift-kit-front-3-5in-rear-3in-6061-t6-aluminum-powder-coated","title":"FlexHitch Ram 1500 Leveling Lift Kit Front 3.5in \/ Rear 3in — 6061-T6 Aluminum, Powder-Coated","description":"\u003cstrong\u003eFlexHitch leveling kit raises the front 3.5\" and rear 3\" of Ram 1500 models (2009–2025) to improve ground clearance and allow larger tires while retaining factory suspension geometry when matched with appropriate control arms.\u003c\/strong\u003e\n\n\u003cp\u003eThis FlexHitch kit is a vehicle-specific lift solution engineered to fit most 2009–2025 Ram 1500 trucks (4WD\/AWD and select 2WD\/RWD with factory front struts). Crafted from forged 6061-T6 aluminum and finished with a high-temp powder coat, the kit provides corrosion resistance and robust fasteners for long-term use. Note important fitment exclusions—air-suspension models (Rebel), Mega Cab, TRX, and trucks converted to separate shock setups are not compatible.\u003c\/p\u003e\n\n\u003ch3\u003eHow much lift will I actually get on my Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eInstalled results deliver a true 3.5\" front and 3\" rear ride-height increase. Although the front strut spacer measures smaller internally, its geometry restores full lift once mounted to the stock strut assembly on compatible trucks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront: true 3.5\" increase after installation\u003c\/li\u003e\n  \u003cli\u003eRear: 3\" coil spacer lift\u003c\/li\u003e\n  \u003cli\u003eMeasured lift accounts for suspension geometry, not just spacer thickness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my Ram 1500 and what should I avoid?\u003c\/h3\u003e\n\u003cp\u003eThe kit fits 2009–2025 Ram 1500 4WD\/AWD and 2020–2025 Ram 1500 2WD\/RWD with OEM front struts only. It will not fit trucks with air suspension (Rebel), Mega Cab or TRX models, or vehicles converted to aftermarket separate front shocks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: factory front strut-equipped Rams within the listed years\u003c\/li\u003e\n  \u003cli\u003eNot compatible: air-suspension or special-model Rams (Rebel, TRX, Mega Cab)\u003c\/li\u003e\n  \u003cli\u003eAvoid installation on trucks already altered to separate shock setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need additional parts or adjustments after installation?\u003c\/h3\u003e\n\u003cp\u003eYes — the stock OEM control arms are not suitable with this lift height and can create geometry problems. Pair the kit with extended control arms when lifting 2–4\" to protect suspension components and maintain proper alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequired: extended control arms for lifts in the 2–4\" range\u003c\/li\u003e\n  \u003cli\u003eRecommended: professional alignment after installation\u003c\/li\u003e\n  \u003cli\u003eHardware: supplied Class 12.9 bolts meet high-strength requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes protect the kit from corrosion and wear?\u003c\/h3\u003e\n\u003cp\u003eFlexHitch uses 6061-T6 forged aluminum machined to tight tolerances, combined with a high-temperature 280℃ powder coat. This combination improves strength, resists oxidation, and helps the kit withstand road salt and harsh environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 6061-T6 forged aircraft-grade aluminum\u003c\/li\u003e\n  \u003cli\u003eFinish: 280℃ high-temp powder coating for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eFasteners: Class 12.9 grade bolts for superior clamping force\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This FlexHitch leveling lift is designed for Ram 1500 owners who want increased ground clearance, the ability to run larger tires, or to reduce rear sag while hauling or towing—but only if the truck matches the listed fitment and you plan to install extended control arms where needed. It’s a good match for drivers seeking a durable, vehicle-specific spacer-based lift without replacing the entire suspension, provided they avoid incompatible models and follow alignment and control-arm recommendations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit a TRX or Rebel Ram 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit is incompatible with TRX, Rebel (air-suspension), Mega Cab, and trucks with aftermarket separate shocks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are additional parts required for safe installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Use extended control arms for 2–4\" lifts and get a professional alignment after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FlexHitch","offers":[{"title":"Default Title","offer_id":67584868974777,"sku":"B0FC2DYX78","price":227.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/flexhitch-front-strut-spacer-front-view.jpg?v=1790457015"},{"product_id":"ksp-performance-2-inch-8x6-5-wheel-spacers-for-2013-ram-2500-3500-126-15mm-hub-bore-black-anodized","title":"KSP PERFORMANCE 2-inch 8x6.5 Wheel Spacers for 2013+ Ram 2500\/3500 — 126.15mm Hub Bore, Black Anodized","description":"\u003cp\u003e\u003cstrong\u003eThese are 2\" (50.8mm) 8x6.5 (8x165.1mm) wheel spacers from KSP PERFORMANCE engineered to safely push your wheels outward for improved fitment, clearance, and a more aggressive stance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for heavy-duty trucks and vans, these 8-lug spacers adapt wheel offset and hub clearance for many Ram, Chevy, GMC, and Nissan NV models. Machined from 6061-T6 aluminum and finished with black anodizing, the kit includes hardened 10.9-grade geomet bolts and thread locker for secure attachment. Torque recommendations and precise hub bore sizing help ensure correct installation when matched with compatible vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my truck model and bolt pattern?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility is determined by bolt pattern, hub bore, and vehicle-specific fitment. These spacers use an 8x6.5 (8x165.1mm) bolt pattern and a 126.15mm hub bore, making them suitable for many 8-lug Ram, Chevy, GMC, and Nissan NV heavy-duty models listed below.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRam: 2013+ Ram 2500; 2012+ Ram 3500\u003c\/li\u003e\n  \u003cli\u003eChevy: 1988–2000 C\/K series 2500–3500, 1997–2014 Express 2500\/3500, 1999–2010 Silverado 2500\/3500\u003c\/li\u003e\n  \u003cli\u003eGMC: 1997–2014 Savana 2500\/3500, 1999–2010 Sierra 2500\/3500, Yukon XL 2500 (2000–2014)\u003c\/li\u003e\n  \u003cli\u003eNissan NV: 2012–2014 NV1500\/2500\/3500\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these spacers change handling, clearance, and tire fitment?\u003c\/h3\u003e\n\n\u003cp\u003ePushing the wheel 2 inches outward increases scrub radius and track width, which can improve cornering stability and create room for larger or wider tires. They also provide clearance for aftermarket brakes, calipers, or suspension components that otherwise rub or interfere.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncreases track width by 2\" per axle for better lateral stability.\u003c\/li\u003e\n  \u003cli\u003eCreates brake and caliper clearance for larger brake kits.\u003c\/li\u003e\n  \u003cli\u003eMakes room for wider tires and aftermarket wheels without rubbing.\u003c\/li\u003e\n  \u003cli\u003eDelivers a more aggressive aesthetic stance and wheel tuck correction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are used, and how durable are they?\u003c\/h3\u003e\n\n\u003cp\u003eThese spacers are CNC produced from 6061-T6 aluminum billet, then anodized in black for corrosion resistance. Included fasteners are heat-treated and rated 10.9 with a geomet coating to resist rust and reduce vibration risk; thread locker is supplied for secure installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e6061-T6 aluminum construction: light and strong for load-bearing wheel applications.\u003c\/li\u003e\n  \u003cli\u003eBlack anodized finish improves corrosion resistance and appearance.\u003c\/li\u003e\n  \u003cli\u003e10.9 grade geomet bolts: heat-treated for tensile strength and reduced vibration.\u003c\/li\u003e\n  \u003cli\u003eThread locker included to help maintain torque and prevent loosening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation specs and precautions should I follow?\u003c\/h3\u003e\n\n\u003cp\u003eCorrect installation requires matching hub bore and bolt pattern, using the recommended torque, and re-checking fasteners after initial driving. KSP PERFORMANCE provides recommended torque values and suggests confirming vehicle-year compatibility before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThickness: 2\" (50.8mm) spacer per unit; sold as 2 pieces (one per side).\u003c\/li\u003e\n  \u003cli\u003eStud\/nut thread pitch: 14mm x 1.5; hub bore: 126.15mm.\u003c\/li\u003e\n  \u003cli\u003eRecommended torque: 85–95 ft·lb; re-torque after first 50–100 miles.\u003c\/li\u003e\n  \u003cli\u003eVerify correct wheel backspacing and hub-centric fit for each vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: These KSP PERFORMANCE 2\" 8x6.5 spacers are aimed at truck owners, professional installers, and off-road or hauling enthusiasts who need extra tire clearance, brake caliper room, or a wider track for improved stance and handling. If you drive a compatible Ram, Chevy, GMC, or Nissan NV listed above and want a robust, lightweight spacer solution, this kit is built for those upgrades. Always confirm fitment and follow vehicle-specific installation guidance; contact KSP PERFORMANCE support for fitment questions or warranty assistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these spacers hub-centric?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they feature a 126.15mm hub bore to center the wheel on compatible hubs; verify your vehicle hub size before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What torque should I use when installing these spacers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow the recommended torque of 85–95 ft·lb and re-torque after 50–100 miles for safety.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584869662905,"sku":"B0BYJ11NSL","price":254.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-front-view-spacer-kit_0eec3941-6bb9-45d8-94a0-e0916255b561.jpg?v=1790457056"},{"product_id":"x4xz-ignition-coil-double-iridium-spark-plug-kit-for-2000-07-dodge-ram-4-7l-8-coils-8-plugs-direct-fit","title":"X4XZ Ignition Coil \u0026 Double-Iridium Spark Plug Kit for 2000–07 Dodge Ram 4.7L — 8 Coils + 8 Plugs, Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eThis X4XZ kit supplies eight UF270 ignition coils paired with eight 4503 double-iridium spark plugs engineered for Ford-style 4.7L V8s in 2000–2007 Dodge Ram and compatible models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ram shows rough idle, hesitation under load, or reduced fuel efficiency, worn coils or plugs are often the cause. This replacement pack is built to match or exceed original equipment fit and function, delivering stable spark delivery, longer component life, and straightforward bolt-in installation for owners and mechanics maintaining mid-2000s Dodge Ram 1500, Dakota, Durango, and related vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these ignition coils and plugs affect drivability?\u003c\/h3\u003e\n\u003cp\u003eReplacing degraded coils and worn spark plugs restores consistent combustion across all cylinders. Expect smoother idle, fewer misfires, and more responsive throttle feel once the electrical and firing gaps are renewed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces engine misfire and rough-idle incidents\u003c\/li\u003e\n  \u003cli\u003eImproves throttle response and steady power delivery\u003c\/li\u003e\n  \u003cli\u003eHelps recover lost fuel economy caused by weak sparks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the 4503 double iridium plug and UF270 coil durable?\u003c\/h3\u003e\n\u003cp\u003eThe double-iridium electrodes resist erosion far longer than standard plugs, extending service intervals up to roughly 100,000 kilometers under normal use. The UF270 coils use robust materials and internal noise suppression to resist heat cycling, vibration, and radio-frequency interference that can degrade older units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-iridium tip for extended wear life and consistent sparks\u003c\/li\u003e\n  \u003cli\u003eStainless-steel spring and ferrite suppressor reduce electrical noise\u003c\/li\u003e\n  \u003cli\u003eThermoplastic connector resists heat-related cracking and ensures secure fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers are covered by this kit?\u003c\/h3\u003e\n\u003cp\u003eThis kit lists compatibility with many Dodge, Jeep, Chrysler, and Mitsubishi models that use the 4.7L V8 from model years around 1999–2008. It matches OE reference UF270 and 4503 and replaces several legacy numbers used across manufacturers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 2000–2007 Dodge Ram 1500 V8 4.7L and other listed vehicles\u003c\/li\u003e\n  \u003cli\u003eOE reference: UF270 \u0026amp; 4503; replaces SKIC038, UF297 and multiple factory codes\u003c\/li\u003e\n  \u003cli\u003ePackage includes 8 coils + 8 double-iridium spark plugs (no manual)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the original coil-on-plug layout and generally requires basic hand tools and a torque wrench for proper plug seating. While many DIYers can handle the swap in a driveway, have the vehicle cooled and follow torque and gap specs to avoid thread or connector damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacements for coil-on-plug applications on listed models\u003c\/li\u003e\n  \u003cli\u003eRequires basic tools: ratchet, spark plug socket, torque wrench, anti-seize optional\u003c\/li\u003e\n  \u003cli\u003eNo printed instructions included; refer to vehicle service manual for torque and gap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This X4XZ ignition coil and double-iridium plug kit is aimed at owners, independent shops, and fleet managers working on 4.7L V8 vehicles from the mid-2000s who need a full-cylinder replacement set. It’s ideal when multiple misfires or uneven performance indicate several failing coils or plugs, or when you prefer replacing all ignition components at once to restore smooth operation and long-term reliability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these coils and plugs fit my 2005 Dodge Ram 1500 4.7L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this set lists compatibility for 2002–2007 Dodge Ram 1500 with the 4.7L V8. Check your OEM part numbers against UF270 and 4503 to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do the double-iridium spark plugs last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Double-iridium plugs are rated for extended life, typically up to about 100,000 kilometers under normal driving conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"X4XZ","offers":[{"title":"Default Title","offer_id":67584870416569,"sku":"B0D621F2L2","price":194.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/x4xz-kit-front-packaging.jpg?v=1790457099"},{"product_id":"x4xz-ignition-coil-double-iridium-spark-plug-kit-for-3-6l-v6-6-coil-6-plug-set-uf807-93175-for-chrysler-dodge-jeep-ram","title":"X4XZ Ignition Coil \u0026 Double Iridium Spark Plug Kit for 3.6L V6 — 6-Coil\/6-Plug Set, UF807 \u0026 93175 for Chrysler\/Dodge\/Jeep\/Ram","description":"\u003cstrong\u003eComplete six-pack ignition coil and double-iridium spark plug kit designed to restore reliable spark delivery and smoother engine operation for 3.6L Chrysler, Dodge, Jeep and Ram models.\u003c\/strong\u003e\n\n\u003cp\u003eThis X4XZ kit pairs UF807 ignition coils with 93175 double iridium spark plugs to replace worn ignition components on compatible 3.6L vehicles. Each coil and plug set is engineered to meet or exceed original equipment standards so you can re-establish consistent combustion, improved cold starts and steadier idling without complex modifications. The kit ships with six coils and six plugs, covering a full bank replacement for V6 engines.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe set is compatible with many FCA vehicles equipped with the 3.6L Pentastar V6 from model years roughly 2016–2021. Always cross-check plug and coil part numbers with your vehicle’s VIN or service manual prior to purchase to confirm fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: 2017–2021 Chrysler Pacifica, 2020–2021 Chrysler Voyager\u003c\/li\u003e\n  \u003cli\u003eAlso fits: 2016–2021 Dodge Durango, 2020–2021 Jeep Gladiator\u003c\/li\u003e\n  \u003cli\u003eAdditional models: 2016–2021 Jeep Grand Cherokee, 2018–2021 Jeep Wrangler, 2019–2021 Ram 1500\u003c\/li\u003e\n  \u003cli\u003eCross-reference OE numbers provided in the product details for final confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these coils and plugs impact everyday driving?\u003c\/h3\u003e\n\u003cp\u003eWorn coils or plugs can cause misfires, rough idle, reduced throttle response and lower fuel economy. Replacing both components at once helps restore uniform spark timing across all cylinders, producing smoother acceleration and more predictable engine behavior under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces misfire incidence and rough idling\u003c\/li\u003e\n  \u003cli\u003eHelps recover lost power and throttle responsiveness\u003c\/li\u003e\n  \u003cli\u003eSupports steadier fuel burn and potential fuel-efficiency improvement\u003c\/li\u003e\n  \u003cli\u003eImproves cold-start stability and overall drivability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key technical advantages of the UF807 coils and 93175 plugs?\u003c\/h3\u003e\n\u003cp\u003eThe UF807 coils use robust materials and internal suppression to minimize radio-frequency interference and reliably transfer high voltage to the plugs. The 93175 plugs use double iridium electrodes for extended durability and consistent spark over a long service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble iridium spark tips for longer life—rated for extensive mileage\u003c\/li\u003e\n  \u003cli\u003eStainless-steel spring and ferrite noise suppressor inside coils to reduce interference\u003c\/li\u003e\n  \u003cli\u003eThermoplastic coil connectors engineered to resist heat cycling and cracking\u003c\/li\u003e\n  \u003cli\u003eForm, fit and function designed to match or improve on OE performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how do I install them?\u003c\/h3\u003e\n\u003cp\u003eThe package contains six UF807 ignition coils and six 93175 double iridium spark plugs—enough for a full engine replacement on V6 vehicles. Basic mechanical skills and common hand tools are typically all that’s needed; follow manufacturer torque specs and gap recommendations for safe, reliable installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 6 ignition coil packs + 6 double iridium spark plugs\u003c\/li\u003e\n  \u003cli\u003eOE\/replace numbers provided for verification (examples: 68223569AB, 68223569AD)\u003c\/li\u003e\n  \u003cli\u003eInstallation: remove old coils and plugs, fit new plugs to correct torque, connect coils securely\u003c\/li\u003e\n  \u003cli\u003eNo printed manual in box—consult vehicle service guide or professional mechanic if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This kit is ideal for owners and independent mechanics servicing 3.6L Chrysler, Dodge, Jeep or Ram V6 engines who need a direct-replacement coil-and-plug solution. Choose this set when you want full-bank renewal with long-life iridium plugs and coils that match OE fitment without needing special adapters. If you prefer professional installation, a routine shop job will typically return smooth, reliable operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these coils and plugs a direct replacement for my 3.6L V6?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this kit is built to match OE fitment for many 3.6L Pentastar V6 models; verify compatibility with your VIN or OE part numbers before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do the double iridium spark plugs typically last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Double iridium plugs are designed for extended service life, often lasting tens of thousands of miles; follow vehicle maintenance intervals for best results.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"X4XZ","offers":[{"title":"Default Title","offer_id":67584871039161,"sku":"B0DS1SLBB9","price":221.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/x4xz-uf807-coil-and-93175-plug-front-view.jpg?v=1790457119"},{"product_id":"knolet-rear-wheel-hub-bearing-assembly-512493-for-chrysler-dodge-ram-volkswagen-routan-rear-5-lug-w-abs-oe-fit-durable-steel","title":"KNOLET Rear Wheel Hub Bearing Assembly 512493 for Chrysler\/Dodge\/Ram\/Volkswagen Routan, Rear 5-Lug w\/ABS, OE-fit durable steel","description":"\u003cp\u003e\u003cstrong\u003eKNOLET 512493 is a direct-fit rear wheel hub bearing assembly designed to replace failing rear hubs on compatible Chrysler, Dodge, Ram and Volkswagen Routan models, restoring smooth rotation and ABS functionality.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your rear wheel hub is making noise, producing vibration, or triggering ABS warnings, this KNOLET replacement hub assembly is built to meet OE-style fit and function. Machined to precise tolerances and supplied with an ABS sensor, the unit installs on both left and right rear axles and fits multiple model years listed in the vehicle-fitment. The assembly uses high-hardness forged carbon steel and premium seals to resist wear, contamination, and moisture for longer service life.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this 512493 hub assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThis hub is intended for specific rear-wheel applications across several FCA and VW models. Confirm fitment by selecting Year\/Make\/Model before ordering or by checking the vehicle fitment section to ensure exact compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrysler Town \u0026amp; Country: 2012–2016\u003c\/li\u003e\n  \u003cli\u003eDodge Grand Caravan: 2012–2019\u003c\/li\u003e\n  \u003cli\u003eRam C\/V: 2012–2015\u003c\/li\u003e\n  \u003cli\u003eVolkswagen Routan: 2012–2014\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this hub assembly address common wheel bearing problems?\u003c\/h3\u003e\n\u003cp\u003eKNOLET hub assemblies replace worn bearings that cause rattling, steering or wheel vibration, and grease leakage. The unit is manufactured to OEM-style dimensions to reduce installation time and restore proper wheel alignment and ABS signal integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-machined bearing surfaces minimize drag and noise.\u003c\/li\u003e\n  \u003cli\u003eIntegrated ABS sensor maintains wheel speed feedback for safety systems.\u003c\/li\u003e\n  \u003cli\u003eRobust sealing design prevents dirt and water intrusion.\u003c\/li\u003e\n  \u003cli\u003eProtective coating helps resist corrosion in wet conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications I should check before buying?\u003c\/h3\u003e\n\u003cp\u003eVerify these measurements and features against the vehicle’s original hub to guarantee fit. The assembly is made for rear left and right axles and includes necessary studs and ABS compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlange diameter: 6.36\"; bolt circle diameter: 5\"\u003c\/li\u003e\n  \u003cli\u003eHub pilot diameter: 3.35\"; brake pilot diameter: 2.85\"\u003c\/li\u003e\n  \u003cli\u003eFlange bolt holes: 4; wheel studs: 5\u003c\/li\u003e\n  \u003cli\u003eIncludes ABS sensor; reference part numbers listed for cross-check\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should a technician expect?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is engineered for professional or experienced DIY installation and matches OE-style dimensions to simplify replacement. Typical installation requires hub removal, cleaning the knuckle face, and proper torque of flange bolts to manufacturer specs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-compliant dimensions allow straightforward swapping of the old hub\u003c\/li\u003e\n  \u003cli\u003eAnti-shock, low-friction design reduces break-in time after install\u003c\/li\u003e\n  \u003cli\u003eIncludes ABS sensor to prevent additional wiring work on most applications\u003c\/li\u003e\n  \u003cli\u003eRecommended: professional torque tools and inspection of related suspension components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This KNOLET 512493 rear wheel hub bearing assembly is aimed at owners and technicians working on 2012–2019 Dodge Grand Caravans, 2012–2016 Chrysler Town \u0026amp; Countries, 2012–2015 Ram C\/V vans, and 2012–2014 Volkswagen Routans who need a reliable, OE-style replacement hub with ABS compatibility. It suits drivers seeking improved ride stability and quieter operation, and garages that want a cost-effective, precision-made hub that reduces installation time and follow-up repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub include the ABS sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The KNOLET 512493 assembly comes with the ABS sensor integrated for compatible models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this hub on either rear side of the vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This assembly fits both left and right rear axle positions for the listed vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KNOLET","offers":[{"title":"Default Title","offer_id":67584872579257,"sku":"B0DGLMFSS3","price":224.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/knolet-rear-hub-front-view.jpg?v=1790457213"},{"product_id":"dynofit-leveling-lift-kit-for-dodge-ram-1500-3-front-2-rear-cnc-6061-t6-aluminum-strut-spacers","title":"dynofit Leveling Lift Kit for Dodge Ram 1500 — 3\" Front \/ 2\" Rear, CNC 6061-T6 Aluminum Strut Spacers","description":"\u003cp\u003e\u003cstrong\u003edynofit leveling lift kit raises the front 3\" and rear 2\" of compatible Dodge Ram 1500 models with precision CNC aluminum strut spacers and bolt-on level spacers for improved tire clearance and a balanced stance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis dynofit kit is designed to restore a level look to your Ram 1500 while providing the extra clearance needed for larger tires and aftermarket wheels. Manufactured from forged 6061-T6 aluminum, the lift components are CNC-machined and powder-coated to resist corrosion and retain a factory-quality finish. Installation is bolt-on, avoids cutting or spring removal, and uses high-grade fasteners to ensure long-term durability.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit affect tire clearance and vehicle appearance?\u003c\/h3\u003e\n\u003cp\u003eThe kit lifts the front by approximately 3 inches and the rear by roughly 2 inches, creating sufficient fender gap for taller tires and offering a more aggressive, level profile. It remedies the factory rake so the truck sits more even from front to back without the look of a nose-down stance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreates extra room for larger wheel\/tire combos\u003c\/li\u003e\n  \u003cli\u003eImproves visual balance between front and rear\u003c\/li\u003e\n  \u003cli\u003ePowder-coated spacers preserve finish against road elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the dynofit spacers change ride comfort or require suspension surgery?\u003c\/h3\u003e\n\u003cp\u003eThese spacers are engineered to retain the original spring and strut function, so you shouldn’t experience harsher ride quality just from the spacers alone. Because the kit mounts on top of the factory strut assembly and uses solid bolts, it avoids cutting or permanent alterations to stock components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt-on installation — no spring compressors required\u003c\/li\u003e\n  \u003cli\u003eMaintains factory damping characteristics in normal use\u003c\/li\u003e\n  \u003cli\u003eQuality hardware reduces risk of warping or loosening over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles are compatible and what should I watch out for?\u003c\/h3\u003e\n\u003cp\u003eThis dynofit kit fits most Dodge Ram 1500 models from 2009–2026 with 4WD\/AWD, and 2020–2026 2WD\/RWD trucks. It is not compatible with vehicles equipped with factory air suspension, Mega Cab or TRX variants, and certain older 2WD configurations—check fitment carefully before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2009–2026 Ram 1500 4WD\/AWD; 2020–2026 Ram 1500 2WD\/RWD\u003c\/li\u003e\n  \u003cli\u003eNot compatible: air-suspension models, Mega Cab, TRX\u003c\/li\u003e\n  \u003cli\u003eVehicles should be realigned after installation and before fitting aftermarket wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what follow-up is recommended?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone with basic mechanical skills and common tools—spacers bolt to the top of the strut assembly, eliminating the need to remove or disassemble the coil spring. After installation, a professional wheel alignment is strongly recommended to preserve steering response and tire wear, especially before mounting new wheels or tires.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt-on procedure with included high-strength bolts\u003c\/li\u003e\n  \u003cli\u003eNo permanent modifications like drilling or cutting required\u003c\/li\u003e\n  \u003cli\u003ePost-install wheel alignment required for safe handling and even tire wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? dynofit's 3\" front \/ 2\" rear leveling lift kit is aimed at Ram 1500 owners who want a level, tougher-looking truck and need extra fender clearance for larger tires without swapping springs or investing in a full suspension lift. It suits daily drivers and light off-road enthusiasts who prefer a bolt-on solution with durable, corrosion-resistant components. If you drive a TRX, a Ram with factory air suspension, or a Mega Cab, this kit is not appropriate—double-check your model year and drivetrain before ordering. dynofit backs the product with a 2-year warranty and a 30-day refund window for added peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit Ram 1500 TRX models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The dynofit leveling kit is not compatible with TRX, Mega Cab, or air-suspension Ram 1500 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a wheel alignment after installing the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A professional wheel alignment is required after installation and before mounting aftermarket wheels or tires.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"dynofit","offers":[{"title":"Default Title","offer_id":67584882573497,"sku":"B078RKHCTJ","price":204.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dynofit-front-view-on-ram1500.jpg?v=1790457559"},{"product_id":"laipz-zf-8hp70-8-speed-transmission-fluid-filter-service-kit-ram-jeep-dodge-2013-2019-6l-oe-atf-pump","title":"LAIPZ ZF 8HP70 8-Speed Transmission Fluid \u0026 Filter Service Kit — RAM\/Jeep\/Dodge 2013–2019, 6L OE ATF + Pump","description":"\u003cp\u003e\u003cstrong\u003eA complete LAIPZ service kit that replaces the transmission pan, filter, bolts and supplies six liters of OE-spec ATF plus a pump for ZF 8HP70 8-speed transmissions in select RAM, Jeep and Dodge models (2013–2019).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit bundles everything needed to perform a thorough fluid-and-filter service on vehicles equipped with the ZF 8HP70 8-speed automatic transmission. It includes a fitted pan assembly with installed gasket and magnets, genuine-spec transmission fluid made in Germany, a manual hand pump for filling, and all fasteners and seals required for a clean installation. The kit is tailored to fit many RAM 1500, Jeep Grand Cherokee, Dodge Durango, Charger and Challenger model years shown, but it is not compatible with deep-pan 845RE transmissions.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this kit fits my vehicle?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is based on the vehicle’s transmission code and model year range. Use the Mopar VIN lookup or check your transmission label to confirm the ZF 8HP70 (not 845RE deep pan) before purchasing. If your VIN indicates an 8HP70, this kit contains the correct pan shape, bolts and fill components for a drop-in service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits ZF 8HP70 8-speed transmissions in compatible model years\u003c\/li\u003e\n  \u003cli\u003eCompatible models: RAM 1500 (2013–2019), Grand Cherokee (2014–2019)\u003c\/li\u003e\n  \u003cli\u003eAlso fits Dodge Durango, Charger \u0026amp; Challenger (2014\/2015–2019) with 8HP70\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 845RE deep-pan transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly is included in the LAIPZ service kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships as a complete service pack so you won’t need additional parts for a standard pan-and-fluid change. Components are prepared to speed up the job and reduce the risk of missing small items like gasket or magnets. Fluid is OE-spec and manufactured in Germany to meet ZF requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 transmission pan assembly with installed filter, gasket and drain plug\u003c\/li\u003e\n  \u003cli\u003e6 × 1L OE-spec ATF bottles (Made in Germany) and a manual fluid pump\u003c\/li\u003e\n  \u003cli\u003e13 pan bolts, 2 oil pan magnets, 1 fill plug with seal ring included\u003c\/li\u003e\n  \u003cli\u003ePan comes pre-assembled to simplify replacement and avoid seal damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use the included pump and fluids safely?\u003c\/h3\u003e\n\u003cp\u003eThe hand pump is designed to transfer ATF from the 1L bottles into the transmission without spills. Use a clean workspace, follow vehicle manufacturer fill procedures, and check fluid level at operating temperature for accurate measurement. Dispose of old fluid responsibly and tighten the fill plug to the recommended torque.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFill using the manual pump to reduce contamination and spills\u003c\/li\u003e\n  \u003cli\u003eFollow OEM fill and level procedures for the ZF 8HP70 transmission\u003c\/li\u003e\n  \u003cli\u003eReplace the fill plug seal ring and hand-tighten then torque to spec\u003c\/li\u003e\n  \u003cli\u003eCollect and recycle used ATF per local regulations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the quality and maintenance benefits of this kit?\u003c\/h3\u003e\n\u003cp\u003eReplacing the pan, filter and ATF together restores proper fluid filtration and helps maintain shift performance by removing trapped debris and replenishing fluid condition. The included OE-spec ATF is formulated for ZF transmissions, and the pan magnets capture metal particulates for ongoing protection. This is a preventative maintenance step to keep the transmission operating as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-spec ATF from Germany matched to ZF 8HP70 requirements\u003c\/li\u003e\n  \u003cli\u003ePan magnets and new filter trap contaminants and metal shavings\u003c\/li\u003e\n  \u003cli\u003eComplete hardware reduces chances of missing seals or bolts\u003c\/li\u003e\n  \u003cli\u003ePreinstalled gasket reduces installation errors and leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This LAIPZ service kit is intended for DIY mechanics, independent shops and fleet technicians who service RAM 1500, Jeep Grand Cherokee, Dodge Durango, Charger or Challenger models equipped with the ZF 8HP70 8-speed transmission (model years listed). It’s not suitable for vehicles with the 845RE deep-pan transmission—confirm your transmission code with the VIN lookup or factory label before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit all 2015–2019 Chargers and Challengers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits those models only if equipped with the ZF 8HP70 8-speed transmission; verify using your VIN or transmission code.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the ATF in this kit OEM-spec?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the six 1L bottles are OE-spec ATF manufactured in Germany to meet ZF requirements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LAIPZ","offers":[{"title":"Default Title","offer_id":67584891420857,"sku":"B0DX48265P","price":433.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/laipz-pan-assembly-front-view_9d72c73e-3cbb-471f-ac79-e781c407bf89.jpg?v=1790457869"},{"product_id":"k-n-performance-diesel-high-flow-lifetime-engine-air-filter-for-2013-2026-ram-2500-3500-4500-5500-washable-pre-oiled-33-5005","title":"K\u0026N Performance Diesel High-Flow Lifetime Engine Air Filter for 2013-2026 RAM 2500\/3500\/4500\/5500 — Washable, Pre-Oiled 33-5005","description":"\u003cp\u003e\u003cstrong\u003eHigh-flow, washable K\u0026amp;N diesel engine air filter built to boost airflow and last the life of your RAM without frequent replacements.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned specifically for heavy-duty RAM trucks from 2013 through 2026, the K\u0026amp;N Performance Diesel High-Flow Lifetime Engine Air Filter (33-5005) replaces disposable paper elements with a reusable, high-capacity cotton-gauze design. It improves intake airflow for better throttle response and potential power gains, installs in minutes into the factory airbox, and is backed by K\u0026amp;N’s limited lifetime warranty. This filter is pre-oiled and ready to drop in, offering a cost-effective and more environmentally friendly alternative to single-use filters.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this filter affect my truck’s performance?\u003c\/h3\u003e\n\u003cp\u003eThe K\u0026amp;N high-flow media is engineered to increase airflow up to 50% versus standard paper filters, which can translate to improved acceleration and more responsive engine behavior under load. Gains vary by engine and tune, but many owners report measurable improvements in throttle response and smoother power delivery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-capacity cotton gauze layers designed for increased airflow\u003c\/li\u003e\n  \u003cli\u003eEngineered to reduce airflow restriction for better acceleration\u003c\/li\u003e\n  \u003cli\u003eTested on demanding tracks and rigs for consistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the washable, reusable design save money and reduce waste?\u003c\/h3\u003e\n\u003cp\u003eInstead of replacing disposable filters every few oil changes, this K\u0026amp;N element cleans and reuses, cutting replacement costs over the vehicle’s lifespan. Under normal highway driving it typically needs cleaning about every 75,000 miles, meaning one K\u0026amp;N can outlast multiple paper filters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWashable cotton media reduces landfill waste from disposable filters\u003c\/li\u003e\n  \u003cli\u003eLong cleaning intervals—roughly every 75,000 miles under average conditions\u003c\/li\u003e\n  \u003cli\u003ePre-oiled and ready for immediate installation, lowering maintenance hassles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation and maintenance complicated?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: the filter drops into the factory airbox and requires minimal tools or time. When it’s time to service, K\u0026amp;N cleaning kits and clear step-by-step instructions make the process simple for DIY owners and mechanics alike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit for specified 2013–2026 RAM 2500\/3500\/4500\/5500 models\u003c\/li\u003e\n  \u003cli\u003ePre-treated with oil so no priming is needed at install\u003c\/li\u003e\n  \u003cli\u003eClean-and-reoil process supported by K\u0026amp;N service kits and guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Owners of 2013–2026 RAM 2500, 3500, 4500, and 5500 trucks who want a durable, high-flow replacement air filter that can increase intake efficiency and lower long-term maintenance costs. It’s ideal for daily drivers seeking smoother throttle response, fleet operators who want fewer filter replacements, and enthusiasts who value proven filtration engineered and tested for heavy-duty use. This K\u0026amp;N filter offers a practical upgrade for anyone wanting better airflow, reduced waste, and a product built in the USA with a lifetime warranty for peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this filter fit my 2016 RAM 3500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 33-5005 K\u0026amp;N Performance Diesel filter is compatible with 2013–2026 RAM 3500 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I clean the K\u0026amp;N diesel air filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Under normal highway driving, clean approximately every 75,000 miles; frequency increases in dusty conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"K\u0026N","offers":[{"title":"Default Title","offer_id":67584892141753,"sku":"B00IAC19FA","price":239.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kn-front-facing-filter-ram.jpg?v=1790457921"},{"product_id":"docs-diesel-6-7l-cummins-filter-combo-kit-for-ram-2500-3500-2019-2024-fuel-oil-air-filters-99-25-efficiency","title":"Doc's Diesel 6.7L Cummins Filter Combo Kit for RAM 2500\/3500 (2019–2024) — Fuel, Oil \u0026 Air Filters, 99.25% Efficiency","description":"\u003cp\u003e\u003cstrong\u003eDoc's Diesel Filter Combo Kit is a complete set of matched fuel, water-separator, oil, and engine air filters designed to fit 6.7L Cummins-equipped RAM 2500\/3500 trucks from 2019–2024, simplifying routine service with verified filtration performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis combo bundles the exact filters you need for scheduled maintenance so you replace all critical filtration elements in one purchase. Each component is selected to match the OEM-style fitment for Ram 6.7L Cummins engines and has been third-party tested to confirm particle capture and dust-holding capacity. The kit reduces shopping time, avoids compatibility guesswork, and helps keep your truck's fluid and air systems protected between service intervals.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these filters prove their performance?\u003c\/h3\u003e\n\u003cp\u003eIndependent lab testing validates the filters' efficiency and dust capacity instead of relying on manufacturer-only claims. The results show very high particle removal rates and substantial dust-holding capacity, which are useful indicators for real-world durability and filtration life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThird-party efficiency rating of 99.25% overall.\u003c\/li\u003e\n  \u003cli\u003e99.1% efficiency down to 3 microns for fine particle control.\u003c\/li\u003e\n  \u003cli\u003e344.2 g verified dust-holding capacity indicating longer service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich parts are included and how do they fit my truck?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the fuel water separators, engine air filter, and oil filter sized for the 6.7L Cummins application. Fitment covers Ram 2500 and 3500 models from 2019 through 2024, but you should confirm your specific year and configuration using the fitment tool on the product page before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes DGF430 and DGF401 fuel water separator elements.\u003c\/li\u003e\n  \u003cli\u003eIncludes DPA6314 engine air filter for intake protection.\u003c\/li\u003e\n  \u003cli\u003eIncludes D5335 oil filter for full-lube system coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I change the filters in this kit?\u003c\/h3\u003e\n\u003cp\u003eService intervals vary by your driving conditions and manufacturer recommendations; use the vehicle’s warranty and maintenance schedule as the primary guide. Typical replacement ranges offer practical guidance depending on whether you drive mostly highway or heavy-duty conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel water separators: generally every 5,000–10,000 miles, up to 15,000 miles maximum.\u003c\/li\u003e\n  \u003cli\u003eOil filters: commonly every 5,000–7,000 miles, up to 10,000–15,000 miles in some cases.\u003c\/li\u003e\n  \u003cli\u003eEngine air filter: inspect at regular service intervals and replace sooner in dusty environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical benefits of buying the combo kit instead of individual filters?\u003c\/h3\u003e\n\u003cp\u003ePurchasing the matched set saves time and makes it less likely you’ll miss a critical filter during service. The kit also eliminates compatibility uncertainty and can be more economical than buying components separately.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne order covers all common service filters for the application.\u003c\/li\u003e\n  \u003cli\u003eEnsures matched components designed for the same engine and model years.\u003c\/li\u003e\n  \u003cli\u003eReduces downtime with everything needed for routine maintenance on hand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Doc's Diesel Filter Combo Kit is aimed at RAM 2500 and 3500 owners with the 6.7L Cummins (2019–2024) who perform routine maintenance themselves or manage fleet upkeep. It's also useful for technicians and shops that want a verified, OEM-style replacement set for fast, reliable service that keeps air, fuel, and oil systems clean between manufacturer-recommended intervals.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2020 Ram 2500 with 6.7L Cummins?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this combo is designed for 6.7L Cummins Ram 2500\/3500 2019–2024. Verify exact configuration with the fitment tool on the product page.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these filters independently tested?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—third-party testing confirms ~99.25% efficiency and 344.2 g dust-holding capacity for the kit's components.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Doc's Diesel","offers":[{"title":"Default Title","offer_id":67584897614009,"sku":"B09CLHM7XZ","price":304.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/docs-diesel-kit-front-packaging.jpg?v=1790458171"},{"product_id":"rough-country-neoprene-front-seat-covers-for-ram-1500-2500-2009-2018-waterproof-foam-padded-front-bucket-set","title":"Rough Country Neoprene Front Seat Covers for Ram 1500\/2500 (2009–2018) - Waterproof, Foam-Padded Front Bucket Set","description":"\u003cp\u003e\u003cstrong\u003eRough Country Neoprene Front Seat Covers are custom-fit, water-resistant, foam-padded covers that protect and refresh the front bucket seats of Ram 1500 (2009–2018) and Ram 2500 (2010–2018).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese front seat covers are engineered to preserve your truck’s interior by blocking spills, dirt, UV fading and everyday wear. Built to factory-like patterns for a snug fit, the four-layer neoprene construction combines a water-resistant layer with foam padding and a durable polyester shell for long-lasting protection and improved comfort. The set includes both front bucket seat covers and headrest covers, with allowances for airbag deployment and seat adjustments.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these seat covers fit my Ram’s front bucket seats?\u003c\/h3\u003e\n\u003cp\u003eThe covers are pattern-cut to match the contours of Ram 1500 and 2500 front bucket seats from the specified model years, ensuring a close, factory-style appearance. They install with integrated attachment points and retain access to seat controls and airbags.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision fit for front bucket seats only, not bench seats.\u003c\/li\u003e\n  \u003cli\u003eIncludes (2) full front covers and headrest covers where applicable.\u003c\/li\u003e\n  \u003cli\u003eCutouts and seams preserve airbag function and seat adjustability.\u003c\/li\u003e\n  \u003cli\u003eVelcro and straps keep covers secure during daily use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and comfort features does the neoprene provide?\u003c\/h3\u003e\n\u003cp\u003eThe four-layer build pairs breathable neoprene with foam padding and a tough outer polyester layer to resist moisture, stains and abrasion while adding cushioning. This combination helps keep seats cooler in hot weather and protected from road grime, pets and kids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWater-resistant neoprene repels spills and light moisture.\u003c\/li\u003e\n  \u003cli\u003eFoam padding reduces seat wear and improves ride comfort.\u003c\/li\u003e\n  \u003cli\u003eDurable polyester outer layer resists snags and stains.\u003c\/li\u003e\n  \u003cli\u003eBreathable construction lowers heat buildup on warm days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these covers look like factory upholstery?\u003c\/h3\u003e\n\u003cp\u003eDesigned to match the seat lines and proportions, the covers provide a clean, integrated look rather than a baggy over-wrap. The finishes and stitching are intended to blend with the cabin for a refreshed appearance without costly reupholstery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTailored seams follow original seat contours for a low-profile look.\u003c\/li\u003e\n  \u003cli\u003eNeutral styling complements most interior colors and trims.\u003c\/li\u003e\n  \u003cli\u003eHeadrest covers included for consistent visual coverage.\u003c\/li\u003e\n  \u003cli\u003eEasy-to-install design preserves the truck’s original aesthetic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These Rough Country Neoprene Front Seat Covers are for Ram owners who want durable, weather-resistant protection with a snug, factory-style fit. They suit daily commuters, work trucks, pet owners and families who need to prevent stains, sun damage and wear while maintaining comfort and seat functionality. If you have front bucket seats on a 2010–2018 Ram 1500\/2500 (matching year compatibility as listed), these covers give practical protection and an immediate interior refresh backed by a two-year warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these covers work with side airbags?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They include cutouts and seam placement designed to maintain side airbag deployment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these covers machine washable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Spot clean recommended; check manufacturer care instructions rather than machine washing to preserve neoprene and padding.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67584903577785,"sku":"B08429RKKN","price":321.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-front-seat-cover-front-view.jpg?v=1790458447"},{"product_id":"xphazz-under-seat-storage-for-dodge-ram-1500-crew-cab-2019-2026-3-piece-abs-organizer-with-adjustable-dividers","title":"XPHAZZ Under-Seat Storage for Dodge Ram 1500 Crew Cab 2019–2026 — 3-Piece ABS Organizer with Adjustable Dividers","description":"\u003cp\u003e\u003cstrong\u003eXPHAZZ Under Seat Storage is a bespoke three-piece organizer designed to fit under the rear seats of 2019–2026 Dodge Ram 1500 Crew Cab trucks, giving you secure, impact-resistant space for tools, gear, and daily essentials.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis under-seat storage system was engineered specifically for full-size 4-door Ram 1500 Crew Cab trucks (new body style) and installs cleanly beneath the rear seats to reclaim otherwise unused space. Constructed from durable ABS plastic, the kit resists dents and impacts while the included dividers let you arrange compartments to match the size and frequency of the items you carry. The set ships with three storage boxes, two adjustable dividers, and all required mounting hardware for a straightforward fit.\u003c\/p\u003e\n\n\u003ch3\u003eWill this storage fit my Ram 1500 Crew Cab?\u003c\/h3\u003e\n\u003cp\u003eYes, if you own a 2019–2026 Ram 1500 Crew Cab new body style (full-size 4-door), this kit was made for that specific application. It is not compatible with narrow Crew Cab, Quad Cab, or Classic models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits full-size Crew Cab 4-door Ram 1500 models including Bighorn, Laramie, Tradesman, Warlock, Rebel, RHO, Limited, and Longhorn.\u003c\/li\u003e\n  \u003cli\u003eAccepts the full-size Crew Cab back door width of 42 inches; double-check your model if unsure.\u003c\/li\u003e\n  \u003cli\u003eNot designed for narrow Crew Cab, Quad Cab, or older Classic chassis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the XPHAZZ under-seat organizer?\u003c\/h3\u003e\n\u003cp\u003eThe storage boxes are molded from robust ABS plastic to withstand daily use and resist impact, scuffs, and light moisture. The material is lightweight but sturdy, keeping contents protected without adding excessive weight under the seat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS construction for long-lasting rigidity and impact resistance.\u003c\/li\u003e\n  \u003cli\u003eRounded edges and smooth finish reduce wear on stored items.\u003c\/li\u003e\n  \u003cli\u003eHardware included for stable, secure installation beneath the seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the dividers and compartments help organize gear?\u003c\/h3\u003e\n\u003cp\u003eTwo adjustable dividers let you partition the interior to store a mix of tools, emergency supplies, documents, or personal gear so items don’t roll around. You can create larger bays for bulky tools or multiple small pockets for chargers, flashlights, and valuables.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo dividers allow customizable compartment sizes based on item dimensions.\u003c\/li\u003e\n  \u003cli\u003eThree separate boxes let you separate categories—tools, electronics, personal items.\u003c\/li\u003e\n  \u003cli\u003eLow-profile design keeps storage accessible while remaining out of sight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes three storage boxes, two dividers, and all necessary accessories for mounting. Installation is straightforward: position the boxes beneath the rear seats and secure them with the provided hardware—no special tools or modifications to the truck are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contents: three storage boxes, two dividers, mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eSimple install using included accessories; minimal tools needed.\u003c\/li\u003e\n  \u003cli\u003eNon-invasive design preserves factory seat function and clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The XPHAZZ Under Seat Storage is ideal for Ram 1500 Crew Cab owners who want to maximize hidden storage without sacrificing cabin space—tradespeople, outdoor enthusiasts, parents, and anyone who prefers an organized truck interior. If you drive a compatible 2019–2026 full-size Crew Cab and need durable, purpose-built under-seat organization, this kit delivers customizable compartments and a rugged ABS construction to keep gear tidy and protected on the road.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit a 2020 Ram 1500 Crew Cab?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits 2019–2026 full-size Ram 1500 Crew Cab new body style models, not narrow Crew Cab, Quad Cab, or Classic models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reconfigure the compartments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes two dividers so you can adjust compartment sizes for tools, electronics, or other items.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"XPHAZZ","offers":[{"title":"Default Title","offer_id":67584907542713,"sku":"B0FBGN1F84","price":258.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/xphazz-under-seat-storage-front-view.jpg?v=1790458619"},{"product_id":"fengyu-under-seat-storage-box-for-ram-1500-crew-cab-2019-2026-removable-waterproof-organizer","title":"FengYu Under-Seat Storage Box for Ram 1500 Crew Cab (2019–2026) — Removable, Waterproof Organizer","description":"\u003cp\u003e\u003cstrong\u003eFengYu's under-seat storage box is a removable, waterproof organizer custom-shaped to fit beneath the rear seats of 2019–2026 Dodge Ram 1500 Crew Cab (new body style) for tidy, secure storage of tools and gear.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis under-seat storage solution is built to expand the usable cargo space in your Ram without permanent alterations. Molded from rugged, easy-to-clean plastic and designed to slide into the factory gap under the Crew Cab rear seat, the box keeps items contained, accessible, and protected from dirt or moisture. Installation takes only minutes with no drilling required, and the detachable toolbox-style layout helps you organize essentials for work, weekend trips, or daily carry.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this storage box fit my 2019–2026 Dodge Ram 1500 Crew Cab?\u003c\/h3\u003e\n\u003cp\u003eThe container is profiled specifically for the new body-style Crew Cab models from 2019 through 2026 and is not compatible with classic-style Rams. Its shape aligns with the under-seat cavity so it installs cleanly under the rear seats without blocking seat movement or passenger comfort. You’ll get a near-factory appearance because it tucks away out of sight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade to match the new body-style Crew Cab under-seat dimensions\u003c\/li\u003e\n  \u003cli\u003eNo trimming or modification required for approved model years\u003c\/li\u003e\n  \u003cli\u003eDesign preserves rear-seat clearance and passenger room\u003c\/li\u003e\n  \u003cli\u003eNot compatible with classic-style Dodge Ram 1500\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does it offer?\u003c\/h3\u003e\n\u003cp\u003eConstructed from tough, high-quality plastic, the box resists everyday impacts and stands up to wet or dirty environments. The waterproof surface wipes clean quickly and won’t absorb moisture, which helps protect tools and gear stored inside. Built to last, it’s a low-maintenance addition that won’t corrode like metal alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-density plastic shell for impact resistance\u003c\/li\u003e\n  \u003cli\u003eWaterproof interior that’s simple to hose or wipe down\u003c\/li\u003e\n  \u003cli\u003eLightweight yet rigid for repeated use and transport\u003c\/li\u003e\n  \u003cli\u003eEngineered for long-term wear in truck environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I organize and access items with this box?\u003c\/h3\u003e\n\u003cp\u003eThe unit functions much like a detachable toolbox: lift it out to access contents or carry gear to and from the vehicle. Its interior works well for tools, camping equipment, hunting supplies, or everyday items you want kept secure and tidy. Because it’s modular, you can remove the box to sort contents on a workbench or campsite, then snap it back under the seat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDetachable design for easy removal and carrying\u003c\/li\u003e\n  \u003cli\u003eSpacious interior optimized for tools, gear, and essentials\u003c\/li\u003e\n  \u003cli\u003eKeeps loose items from rolling under seats or into footwells\u003c\/li\u003e\n  \u003cli\u003eImproves overall rear-seat storage efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it simple to install and supported by warranty?\u003c\/h3\u003e\n\u003cp\u003eYes—installation requires no tools or drilling and typically takes a few minutes: slide the box into the under-seat space and confirm fit. If you need assistance, FengYu provides customer support and warranty coverage to address product questions or issues. The straightforward setup makes this an easy aftermarket upgrade for organizing your truck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free installation: no drilling or vehicle modification\u003c\/li\u003e\n  \u003cli\u003eQuick to remove for cleaning or cargo access\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fit or installation help\u003c\/li\u003e\n  \u003cli\u003eWarranty service included with purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The FengYu Under Seat Storage Box is ideal for Dodge Ram 1500 Crew Cab owners (2019–2026 new body style) who need more organized, weather-resistant storage without permanent changes to their truck. It suits contractors, outdoor enthusiasts, hunters, and everyday drivers who want a tidy vehicle interior and easy access to tools and gear.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit under my Dodge Ram 1500 Crew Cab seat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits 2019–2026 Dodge Ram 1500 Crew Cab new body style; it is not compatible with classic-style models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the FengYu under-seat box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No tools or drilling are required—slide the box into place and adjust; customer support is available if needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FengYu","offers":[{"title":"Default Title","offer_id":67584911442105,"sku":"B0GKZVHRB5","price":272.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fengyu-front-view-under-seat-storage-box.jpg?v=1790458708"},{"product_id":"chijuiyzkey-replacement-key-fob-kit-for-dodge-ram-1500-2500-3500-2013-2017-2-remotes-obd-programmer","title":"CHIJUIYZKEY Replacement Key Fob Kit for Dodge Ram 1500\/2500\/3500 (2013–2017) — 2 Remotes + OBD Programmer","description":"\u003cstrong\u003eReplacement key fob kit for 2013–2017 Dodge Ram 1500\/2500\/3500 that includes two remote key remotes plus an easy OBD programmer for self-service pairing.\u003c\/strong\u003e\n\n\u003cp\u003eThis CHIJUIYZKEY package bundles two fully compatible remote key fobs and a user-friendly OBD LCD programmer so you can add or replace keys for regular-key (non-push-button) Dodge Ram trucks from model years 2013 through 2017. The kit is designed for owners who have at least one working original key and prefer to avoid dealership appointments and programming fees. It’s a straightforward, cost-effective way to restore remote locking, unlocking, and remote start control (where supported by the vehicle).\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this will work with my Dodge Ram?\u003c\/h3\u003e\n\u003cp\u003eThis kit is made for Dodge Ram 1500, 2500, and 3500 models from 2013 through 2017 that use a standard key (not a push-to-start system). Verify you have a traditional keyed ignition before purchasing. If your truck has a push-button start, this transmitter is not compatible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible model years: 2013, 2014, 2015, 2016, 2017\u003c\/li\u003e\n  \u003cli\u003eCompatible series: Ram 1500, 2500, 3500\u003c\/li\u003e\n  \u003cli\u003eRequires vehicle with regular keyed ignition (no push-button start)\u003c\/li\u003e\n  \u003cli\u003eOne functioning original key is required for programming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how does the OBD programmer work?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with two keyless entry remote key fobs, an OBD LCD programming tool labeled \"Made Easy Simple,\" replacement button pads, keyrings, and a concise user guide. The OBD device programs the fobs to the vehicle by connecting to the truck’s diagnostic port; it binds to the first vehicle it’s used on and will add additional keys for that same vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x remote key fobs with three-button pads included\u003c\/li\u003e\n  \u003cli\u003e1 x OBD LCD tool for in-vehicle programming (locks to first vehicle)\u003c\/li\u003e\n  \u003cli\u003e2 x keyrings and 1 x user manual for step-by-step setup\u003c\/li\u003e\n  \u003cli\u003eNo smartphone app or internet connection required for programming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and program the replacement key fobs myself?\u003c\/h3\u003e\n\u003cp\u003eProgramming is intended as a DIY process and typically takes only minutes if you follow the included instructions and have a working original key. Plug the OBD programmer into the truck’s diagnostic port, follow the on-screen prompts, and test the remotes once programming completes. The tool simplifies the sequence so you can avoid dealership scheduling and labor charges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHave the original working key available before starting\u003c\/li\u003e\n  \u003cli\u003eConnect the OBD tool to the vehicle’s OBD-II port and follow prompts\u003c\/li\u003e\n  \u003cli\u003eTest lock\/unlock and remote start (if vehicle supports remote start)\u003c\/li\u003e\n  \u003cli\u003eOBD tool remains bound to that vehicle after first use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat limitations or precautions should I be aware of?\u003c\/h3\u003e\n\u003cp\u003eThe programmer is vehicle-specific and will not work to program keys to different vehicles after initial use. It also does not support vehicles equipped with push-button start systems. For best results, keep the original key handy and read the manual before attempting programming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOBD tool locks to the first vehicle it programs — cannot be reused on other trucks\u003c\/li\u003e\n  \u003cli\u003eNot compatible with push-start button Ram models\u003c\/li\u003e\n  \u003cli\u003eRequires at least one original, usable key in your possession\u003c\/li\u003e\n  \u003cli\u003eFollow provided instructions to avoid programming errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: This CHIJUIYZKEY kit suits Ram owners looking to replace lost or worn remotes, add a spare key, or avoid dealer programming costs for 2013–2017 Ram 1500\/2500\/3500 trucks that use a traditional keyed ignition. It’s ideal for DIYers and technicians who want a compact, self-contained solution that programs quickly through the vehicle’s OBD port.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this work with push-button start Rams?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit only supports Ram trucks with a standard keyed ignition, not push-button start models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I program these myself without a dealer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The included OBD LCD tool lets you program the remotes in minutes using the vehicle’s OBD port.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CHIJUIYZKEY","offers":[{"title":"Default Title","offer_id":67584911835321,"sku":"B0FR1Z8YD5","price":188.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/chijuiyzkey-remote-fob-front-view.jpg?v=1790458752"},{"product_id":"rough-country-2-5-suspension-leveling-kit-for-2014-2024-ram-2500-3500-4wd-2-5-lift-cnc-machined-spacers","title":"Rough Country 2.5\" Suspension Leveling Kit for 2014-2024 Ram 2500\/3500 4WD - 2.5\" Lift, CNC-Machined Spacers","description":"\u003cp\u003e\u003cstrong\u003eRough Country’s 2.5\" Suspension Leveling Kit (model 377) lifts the front of 2014–2024 Ram 2500 and 3500 4WD trucks 2.5 inches to level the stance while preserving factory-like ride quality.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit is engineered to correct the nose-down rake of a Ram 2500\/3500 so the front and rear sit evenly under load, improve clearance for larger tires, and maintain reliable daily driving behavior. Every component is CNC-machined or forged for fit and long-term durability, and Rough Country backs the kit with a limited lifetime replacement warranty. The package is designed for a straightforward install using basic tools and can be completed at home or by a local shop.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the leveling kit affect ride height and tire fitment?\u003c\/h3\u003e\n\u003cp\u003eBy adding 2.5 inches of lift at the front, this kit brings the front axle in line with the rear, allowing for taller, more aggressive tires without rubbing. It keeps the truck’s factory suspension geometry close to stock so handling and alignment needs are minimal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdds approximately 2.5\" of front clearance\u003c\/li\u003e\n  \u003cli\u003eSupports installing larger tires (fitment depends on wheel offset)\u003c\/li\u003e\n  \u003cli\u003eReduces nose-down factory rake for a balanced look\u003c\/li\u003e\n  \u003cli\u003eCompatible with most aftermarket wheels and standard aftermarket bump stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and how are they built?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes precision-machined lift spacers and all required hardware for a secure installation. Rough Country uses high-strength materials and corrosion-resistant finishes so the parts hold up to road salt, mud, and everyday wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCNC-machined front leveling spacers engineered for a tight fit\u003c\/li\u003e\n  \u003cli\u003eHigh-grade fasteners and installation hardware included\u003c\/li\u003e\n  \u003cli\u003eProtective coatings to resist corrosion and abrasion\u003c\/li\u003e\n  \u003cli\u003eInstructions and tech support from Rough Country for DIY installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be completed with common hand tools and a torque wrench; many owners finish the job in a few hours per side. Rough Country supplies installation instructions and customer support if questions arise during the process.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools plus a torque wrench recommended\u003c\/li\u003e\n  \u003cli\u003eNo cutting or major suspension modification required\u003c\/li\u003e\n  \u003cli\u003eTypical install time: a few hours with a two-post lift or jack stands\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if you’re not experienced with suspension work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this leveling kit affect warranty, alignment, or towing?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed to keep factory handling characteristics and can be aligned to factory specifications after install. Always check vehicle warranty terms and local regulations; Rough Country offers a limited lifetime replacement warranty on the kit itself.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePost-install front-end alignment is recommended\u003c\/li\u003e\n  \u003cli\u003eNo permanent cutting or welding that would typically void factory components\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle manufacturer warranty language for modifications\u003c\/li\u003e\n  \u003cli\u003ePreserves towing and payload capabilities when installed properly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Rough Country 2.5\" Leveling Kit (377) is ideal for Ram 2500 and 3500 owners from model years 2014–2024 who want a cleaner, leveled appearance, additional front clearance for larger tires, and a durable solution that keeps daily drivability intact. It suits DIYers with basic mechanical skills as well as professional installers seeking a reliable, warranty-backed leveling option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2016 Ram 2500 4WD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Model 377 is compatible with 2014–2024 Ram 2500 and 3500 4WD trucks. Confirm your specific trim and suspension options before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a professional to install the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Not necessarily. Many owners install it at home with basic tools, but professional installation is recommended if you’re inexperienced with suspension work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67584913375417,"sku":"B074QVL6FC","price":200.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rough-country-front-packaging-ram-2500-3500.jpg?v=1790458850"},{"product_id":"beoneo-aluminum-oil-filter-housing-kit-for-3-6l-pentastar-engines-dodge-jeep-ram-fitment-complete-replacement","title":"BEONEO Aluminum Oil Filter Housing Kit for 3.6L Pentastar Engines — Dodge\/Jeep\/Ram Fitment, Complete Replacement","description":"\u003cp\u003e\u003cstrong\u003eBEONEO's reinforced aluminum oil filter housing kit replaces the fragile plastic unit on 3.6L Pentastar engines to reduce heat-related warping and leaks while providing a full replacement kit for direct swap-in.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete BEONEO assembly is designed as a durable upgrade for many Chrysler, Dodge, Jeep and Ram vehicles equipped with the 3.6L Pentastar engine. Supplied as a ready-to-install package, the unit combines an aluminum housing, oil cooler and filter elements with the required sensors, seals and mounting hardware so you can replace a worn or failing housing in one service. The stronger metal construction improves thermal stability and corrosion resistance compared with the original plastic housings used by some manufacturers.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models and years does this BEONEO oil filter housing fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is compatible with a wide range of FCA group vehicles using the 3.6L engine. Check fitment against your VIN or existing part number before purchase to ensure exact compatibility for your vehicle and year.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Dodge Challenger and Charger (2011–2023), Durango (2011–2022), Grand Caravan (2011–2020).\u003c\/li\u003e\n  \u003cli\u003eFits Chrysler 200 (2011–2017), 300 (2011–2023), Pacifica (2017–2023), Town \u0026amp; Country (2011–2016).\u003c\/li\u003e\n  \u003cli\u003eFits Jeep Wrangler (2012–2023), Grand Cherokee (2011–2023), Cherokee (2014–2021), Gladiator (2020–2023).\u003c\/li\u003e\n  \u003cli\u003eFits Ram 1500 (2013–2024), Ram C\/V (2012–2015), ProMaster 1500\/2500\/3500 (2014–2023), Voyager (2020–2022).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts and replacements are included in the BEONEO kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with everything needed to replace the housing and related components, minimizing additional parts sourcing. Included items allow a direct replacement of the housing, cooler and sealing elements so you can complete the swap in one service interval.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 aluminum oil filter housing and cap plus 1 oil filter and 1 oil cooler.\u003c\/li\u003e\n  \u003cli\u003e2 sensors, 5 engine mounting bolts, 5 O-rings and 12 assorted gaskets.\u003c\/li\u003e\n  \u003cli\u003eCompatibility with many OEM part numbers for straightforward cross-referencing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does aluminum improve performance compared to the original plastic housing?\u003c\/h3\u003e\n\u003cp\u003eAluminum offers better heat dissipation and greater dimensional stability than typical plastic housings. That means less warping under sustained engine temperatures, fewer oil leaks over time and improved longevity for the oil routing assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigher heat resistance reduces deformation risk at operating temperatures.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant alloy extends service life in harsh environments.\u003c\/li\u003e\n  \u003cli\u003eRigid mounting reduces stress on gaskets and sensor seals, lowering leak potential.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich OEM part numbers does this BEONEO assembly replace?\u003c\/h3\u003e\n\u003cp\u003eBEONEO's housing is intended as a direct replacement for many factory and aftermarket references. Verify the original part number on your vehicle to confirm match before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces multiple Chrysler\/Dodge\/RAM part numbers including 68105583AF, 68105583AA–AE series and related OEM codes.\u003c\/li\u003e\n  \u003cli\u003eCrosses to service numbers like 926-959, 926-876 and listed Chrysler cooler kit references.\u003c\/li\u003e\n  \u003cli\u003eDesigned to match mounting points and sensor locations used on the 3.6L Pentastar family.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This BEONEO oil filter housing kit is aimed at owners and technicians servicing 3.6L Pentastar engines who want a robust, drop-in replacement for a plastic housing that has failed or for anyone seeking an upgraded, longer-lasting assembly. It’s suitable for DIY mechanics comfortable with engine service and for professional shops needing a complete parts kit that reduces callbacks and extra sourcing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this housing fit my 2015 Jeep Wrangler 3.6L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this BEONEO housing lists fitment for Wrangler models with the 3.6L Pentastar engine from 2012–2023; confirm against your VIN or existing part number.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the oil filter and sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the kit contains an oil filter, oil cooler, two sensors and all necessary bolts, O-rings and gaskets for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BEONEO","offers":[{"title":"Default Title","offer_id":67584913506489,"sku":"B0D1VN3MVB","price":227.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/beoneo-front-view-aluminum-oil-filter-housing.jpg?v=1790458850"},{"product_id":"nilight-taillight-assembly-for-2002-2006-dodge-ram-1500-left-right-pair-dot-compliant-plug-and-play-with-bulbs","title":"Nilight Taillight Assembly for 2002-2006 Dodge Ram 1500 — Left \u0026 Right Pair, DOT-Compliant Plug-and-Play with Bulbs","description":"\u003cp\u003e\u003cstrong\u003eNilight taillight assembly replaces the stock rear lights on 2002–2006 Dodge Ram 1500 trucks with a DOT-compliant, plug-and-play pair that includes bulbs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a Dodge Ram from the 2002–2006 model years and need a reliable taillight replacement, this Nilight kit offers a straightforward upgrade. Designed to match factory fitment for Ram 1500 (and compatible with 2003–2006 Ram 2500\/3500), the assemblies arrive as a left-and-right pair, equipped with bulbs and sealed housings to withstand weather and vibration. The lights meet DOT and SAE standards, and their plug-and-play connectors make swap-in installation possible without cutting or drilling.\u003c\/p\u003e\n\n\u003ch3\u003eWill these taillights fit my Dodge Ram 1500?\u003c\/h3\u003e\n\n\u003cp\u003eThese Nilight assemblies are made to replace the original equipment taillights on Dodge Ram models from 2002 through 2006. Fitment is specific, so verify your truck’s year and model before ordering to ensure correct alignment and connector compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2002–2006 Dodge Ram 1500.\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with 2003–2006 Dodge Ram 2500 and 3500 models.\u003c\/li\u003e\n  \u003cli\u003eDesigned as OE-style replacements—no custom modifications required for most installations.\u003c\/li\u003e\n  \u003cli\u003eConfirm fitment by checking original taillight shape and connector type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weatherproof are these assemblies?\u003c\/h3\u003e\n\n\u003cp\u003eNilight manufactures these taillights with high-impact housings and fully sealed silicone gaskets to resist environmental damage. The construction minimizes fogging, corrosion, and damage from road debris while providing consistent illumination in wet, cold, or dusty conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-impact housing absorbs shocks and vibration from road use.\u003c\/li\u003e\n  \u003cli\u003eFully sealed silicone prevents moisture ingress, fogging, and corrosion.\u003c\/li\u003e\n  \u003cli\u003eMaterial resists fading and UV exposure for extended service life.\u003c\/li\u003e\n  \u003cli\u003eReliable operation in rain, snow, and dusty environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these Nilight taillights legal and safe for road use?\u003c\/h3\u003e\n\n\u003cp\u003eYes—the taillight assemblies conform to DOT and SAE requirements, designed to meet regulatory visibility and signaling standards. Using sanctioned replacement lights helps maintain lawful road operation and improves how other drivers perceive your braking and signaling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDOT \u0026amp; SAE compliant for road-legal use in applicable regions.\u003c\/li\u003e\n  \u003cli\u003eStandard brake, tail, and turn signal functions for clear communication.\u003c\/li\u003e\n  \u003cli\u003eIncludes bulbs pre-installed so lights are ready to operate out of the box.\u003c\/li\u003e\n  \u003cli\u003eImproved visibility helps other road users notice your vehicle sooner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be plug-and-play, using the OE taillight socket so no drilling or body modification is normally required. The package contains both driver and passenger side assemblies with bulbs installed; although most owners can swap these themselves, professional installation is recommended if you’re unfamiliar with vehicle lighting work.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connectors match OE sockets—no cutting or splicing in most cases.\u003c\/li\u003e\n  \u003cli\u003ePairs include both driver and passenger side taillights plus bulbs.\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on replacement; follow factory removal steps for safe installation.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation suggested when unsure about wiring or fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Nilight taillight pair is intended for owners of Dodge Ram trucks (2002–2006) wanting a direct, reliable replacement for worn, cracked, or faded rear lights. It suits DIY mechanics who prefer quick, bolt-in upgrades and truck owners who need DOT-compliant lighting restored without altering factory wiring or body panels. If you require a long-lasting, weatherproof solution that arrives ready to install, this kit offers a practical option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these taillights include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, each pair comes with bulbs pre-installed so the lights are ready to use upon installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is professional installation required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—installation is plug-and-play for most owners, but professional installation is recommended if you're not comfortable with vehicle wiring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Nilight","offers":[{"title":"Default Title","offer_id":67584920158393,"sku":"B0CZNJRF8Y","price":186.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/nilight-taillight-front-assembly.jpg?v=1790459187"},{"product_id":"nilight-ram-1500-2500-3500-headlight-assembly-2002-2005-chrome-housing-clear-lens-2-pack-oe-fit-sealed","title":"Nilight Ram 1500 2500 3500 Headlight Assembly 2002-2005 Chrome Housing Clear Lens 2-Pack OE-Fit Sealed","description":"\u003cp\u003e\u003cstrong\u003eThese Nilight two-pack headlight assemblies replace both driver and passenger headlights on 2002–2005 Ram 1500, 2500, and 3500 trucks with a chrome housing and clear lens for a direct-fit, plug-and-play upgrade.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're restoring an older Ram or replacing damaged housings, these Nilight headlight assemblies provide OE-style fitment and sealed construction so installation is quick and the beam stays clear. They arrive as a driver-side and passenger-side set; bulbs are not included. Designed for the 2002–2005 Dodge\/Ram pickup models, the assemblies match factory mounting points and wiring so you can avoid drilling or modification.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly can I install these headlights?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and intended to be finished in about 15 minutes per side for someone with basic tools and experience. They use the stock connector pattern and mounting points for a direct swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connectors—no cutting or splicing required\u003c\/li\u003e\n  \u003cli\u003eOE-style mounting holes for bolt-on replacement\u003c\/li\u003e\n  \u003cli\u003eNo drilling or body modification needed\u003c\/li\u003e\n  \u003cli\u003eTypical install time: roughly 15 minutes per unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights hold up against moisture and road conditions?\u003c\/h3\u003e\n\u003cp\u003eNilight headlights are built with IP65-rated sealing to resist water intrusion and dust, and they include a ventilation hole to equalize pressure and reduce internal fogging. This helps preserve lens clarity and prolong performance in wet or dusty environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65-rated sealed housing keeps out moisture and debris\u003c\/li\u003e\n  \u003cli\u003eBreather\/vent prevents condensation and internal fogging\u003c\/li\u003e\n  \u003cli\u003eDurable lens and chrome reflector resist everyday road wear\u003c\/li\u003e\n  \u003cli\u003eDOT \u0026amp; SAE compliant construction for safe on-road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat about light output and road safety—do these meet regulations?\u003c\/h3\u003e\n\u003cp\u003eThese Nilight assemblies are manufactured to meet DOT and SAE standards, providing a legal and safe option for replacing worn or damaged headlights. An adjustable aiming screw lets you fine-tune the beam to match your vehicle and local regulations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDOT \u0026amp; SAE compliant housing and lens design\u003c\/li\u003e\n  \u003cli\u003eBeam-level adjusting screw for precise alignment\u003c\/li\u003e\n  \u003cli\u003eClear lens and chrome reflector enhance visible range\u003c\/li\u003e\n  \u003cli\u003eImproves visibility compared to yellowed or damaged stock units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and are bulbs included?\u003c\/h3\u003e\n\u003cp\u003eThe package contains two complete headlight assemblies—one for the driver side and one for the passenger side. Bulbs are not included, allowing you to choose halogen or aftermarket bulbs to fit your preference and brightness needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes both driver and passenger side assemblies\u003c\/li\u003e\n  \u003cli\u003eBulbs sold separately to let you select preferred lamp type\u003c\/li\u003e\n  \u003cli\u003eComes pre-sealed and ready to mount to factory wiring\u003c\/li\u003e\n  \u003cli\u003eSimplifies replacing aged, cracked, or fogged stock headlights\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a 2002, 2003, 2004, or 2005 Ram 1500, 2500, or 3500 and need a reliable, direct-fit headlight replacement, this Nilight 2-pack is built for quick installation, improved clarity, and long-term sealing against weather. It suits truck owners restoring OEM appearance, replacing damaged housings after a collision, or upgrading yellowed originals without rewiring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, bulbs are not included; the assemblies come as housings only so you can install your preferred bulbs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will they fit my 2004 Ram 1500 without modification?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are OE-style direct-fit for 2002–2005 Ram 1500\/2500\/3500 and require no drilling or cutting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Nilight","offers":[{"title":"Default Title","offer_id":67584921632953,"sku":"B092W3DZYF","price":261.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/nilight-front-packaging-headlights-ram-2002-2005.jpg?v=1790459229"},{"product_id":"nilight-headlight-assembly-for-2009-2018-ram-1500-2500-3500-quad-halogen-chrome-housing-clear-lens","title":"Nilight Headlight Assembly for 2009-2018 Ram 1500\/2500\/3500 Quad Halogen - Chrome Housing Clear Lens","description":"\u003cstrong\u003eNilight quad headlight assembly replaces factory quad halogen units for compatible 2009–2018 Ram 1500\/2500\/3500 trucks with a chrome housing and clear lens.\u003c\/strong\u003e\n\n\u003cp\u003eThis direct-fit headlamp assembly is designed for Dodge Ram trucks that originally came with the factory quad-style halogen headlights. It offers a bolt-on replacement with a chrome housing and clear corner lens, engineered to match the vehicle’s original mounting points and optical layout. Note that bulbs are not included and these assemblies will not fit models equipped from the factory with projector-style LED headlights.\u003c\/p\u003e\n\n\u003ch3\u003eWhat trucks and headlight types is this Nilight assembly compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis replacement fits 2009–2018 Dodge Ram 1500 models and 2010–2018 Ram 2500 and 3500 models that have the factory quad halogen headlight design. It does not fit Rams that came with projector LED-style factory headlights.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2009–2018 Ram 1500 (quad halogen)\u003c\/li\u003e\n  \u003cli\u003eCompatible: 2010–2018 Ram 2500 and 3500 (quad halogen)\u003c\/li\u003e\n  \u003cli\u003eNot compatible: Factory projector or LED-style headlight assemblies\u003c\/li\u003e\n  \u003cli\u003eBulbs are sold separately; check bulb type before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect during fitment?\u003c\/h3\u003e\n\u003cp\u003eThe assembly uses a bolt-on design intended for fast installation without cutting or modification. Many users complete the swap in roughly 15 minutes per side, but professional installation is recommended if you’re not comfortable working on vehicle lighting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo trimming or drilling required for correct quad-style trucks\u003c\/li\u003e\n  \u003cli\u003eMounts to the factory locations for a gap-free finish\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools typically sufficient for installation\u003c\/li\u003e\n  \u003cli\u003eConsider professional help for wiring or alignment adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protections does the Nilight headlight offer?\u003c\/h3\u003e\n\u003cp\u003eThe housing is made of durable, impact-resistant ABS plastic and the lens is fully sealed to keep moisture and debris out. The assembly carries an IP65-level sealing characteristic, designed to resist water intrusion and improve longevity compared with unsealed housings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS housing for tensile and impact resistance\u003c\/li\u003e\n  \u003cli\u003eFully sealed lens and housing to minimize moisture entry\u003c\/li\u003e\n  \u003cli\u003eIP65-rated protection against water jets and dust\u003c\/li\u003e\n  \u003cli\u003eChrome finish for OEM-style appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these headlights safe and compliant for road use?\u003c\/h3\u003e\n\u003cp\u003eThese Nilight headlamp assemblies meet DOT and SAE specifications to align with road safety and regulatory expectations. They are designed to produce the correct beam pattern when used with compatible halogen bulbs and properly aligned to avoid blinding oncoming traffic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDOT \u0026amp; SAE compliant for on-road use\u003c\/li\u003e\n  \u003cli\u003eEngineered for the correct beam placement with halogen bulbs\u003c\/li\u003e\n  \u003cli\u003eProper alignment required after installation\u003c\/li\u003e\n  \u003cli\u003eBulb selection can affect output and beam focus\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Nilight quad headlight assembly is aimed at Ram owners who need a direct-fit replacement for damaged or aged factory quad halogen headlights and who want an OEM-style chrome housing with a clear lens. It’s ideal for drivers seeking an affordable, sealed headlamp that restores original fitment and appearance—provided the truck originally had quad halogen units and not factory LED projectors. If you need updated lighting technology, consider compatible bulb upgrades or alternate projector-style assemblies designed for your Ram model.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my 2014 Ram 1500 with factory halogen lights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this Nilight assembly fits 2009–2018 Ram 1500 models that originally had quad halogen headlights.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included with the headlight assemblies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, bulbs are not included; purchase compatible halogen bulbs separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Nilight","offers":[{"title":"Default Title","offer_id":67584923271353,"sku":"B092W1PGDT","price":316.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/nilight-front-packaging-headlamp.jpg?v=1790459290"},{"product_id":"jojobay-car-seat-covers-for-dodge-ram-1500-2500-3500-2009-2025-front-2-piece-waterproof-pu-leather-non-slip-black","title":"JOJOBAY Car Seat Covers for Dodge Ram 1500\/2500\/3500 (2009–2025) Front 2‑Piece, Waterproof PU Leather, Non‑Slip Black","description":"\u003cp\u003e\u003cstrong\u003eThese JOJOBAY front seat covers are tailored waterproof PU-leather replacements built to fit Dodge Ram 1500\/2500\/3500 trucks (2009–2025) in crew, quad, regular, and mega cab configurations.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eMade specifically for a wide range of Dodge Ram trims, these two-piece front seat covers combine a water-resistant exterior with a multi-layer construction for comfort, durability, and easy maintenance. They leave seat-belt buckles, airbags, and seat heaters accessible, install with no special tools, and are designed to match the size and shape of Ram pickup seats from 2009 through 2025.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these covers protect my truck seats?\u003c\/h3\u003e\n\u003cp\u003eThe PU leather outer layer repels spills and resists dirt while the dense internal foam adds padding and resilience. A silicone non-slip base keeps each cover in place under daily use so the protection remains effective.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof high-quality PU leather surface repels liquids and stains\u003c\/li\u003e\n  \u003cli\u003eThick, high-resilience sponge core cushions and restores shape\u003c\/li\u003e\n  \u003cli\u003eNon-slip silicone backing reduces shifting during entry and exit\u003c\/li\u003e\n  \u003cli\u003eDurable stitching and 3D embroidery for long-lasting wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these seat covers fit my Dodge Ram model and trim?\u003c\/h3\u003e\n\u003cp\u003eThese covers are cut and sized for Ram 1500\/2500\/3500 trucks from model years 2009–2025, supporting Classic Cab, Crew Cab, Regular Cab, Quad Cab, and Mega Cab. They are compatible with many factory trim levels like Laramie, Rebel, Big Horn, Limited, Tradesman, SLT and more.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for Dodge Ram 2009–2025 pickup seat dimensions\u003c\/li\u003e\n  \u003cli\u003eFits multiple cab styles: Classic, Crew, Regular, Quad, Mega\u003c\/li\u003e\n  \u003cli\u003eCompatible across common trims including Laramie, Rebel, Big Horn\u003c\/li\u003e\n  \u003cli\u003eTwo-piece set covers driver and passenger front seats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes installation affect seat functions and safety features?\u003c\/h3\u003e\n\u003cp\u003eThe design preserves access to seat-belt buckles, side airbags, and seat heater controls, so normal safety and comfort features remain usable. Installation is tool-free and typically completes within about 30 minutes following the included instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCutouts and attachment points maintain seat-belt and airbag access\u003c\/li\u003e\n  \u003cli\u003eDoes not block seat heaters or adjustment mechanisms\u003c\/li\u003e\n  \u003cli\u003eTool-free installation; estimated install time ~30 minutes\u003c\/li\u003e\n  \u003cli\u003eIncludes hardware and guide for straightforward setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I clean and maintain the PU leather covers?\u003c\/h3\u003e\n\u003cp\u003ePU leather wipes clean with a damp cloth for everyday spills; for heavier soiling use mild soap and water. The material resists staining and dries quickly, while durable stitching preserves appearance after repeated cleaning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWipe spills immediately with a damp microfiber cloth\u003c\/li\u003e\n  \u003cli\u003eUse mild soap and water for tougher stains; avoid harsh solvents\u003c\/li\u003e\n  \u003cli\u003eAir-dry quickly to prevent moisture trapping under the cover\u003c\/li\u003e\n  \u003cli\u003ePeriodic inspection of attachment points keeps fit secure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These JOJOBAY front seat covers are intended for Dodge Ram owners who want heavy-duty, water-resistant protection that matches factory seat shapes across many Ram trims and cab sizes. They suit truck drivers who need easy-clean surfaces, extra padding for comfort, and a durable aesthetic upgrade without sacrificing seat functions like airbags, heaters, or belts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these covers work with heated seats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The design preserves access to seat heaters and does not block heat function.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I return them if they don't fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. JOJOBAY offers a 30-day return window and free accessory replacement for defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JOJOBAY","offers":[{"title":"Default Title","offer_id":67584924909753,"sku":"B09Q8PP2GF","price":279.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jojobay-front-seat-covers-front-view.jpg?v=1790459350"},{"product_id":"curt-gooseneck-hitch-kit-for-ram-2500-3500-2-5-16-in-ball-38-000-lb-gtw-tool-free-drop-in","title":"CURT Gooseneck Hitch Kit for Ram 2500\/3500 — 2-5\/16 in Ball, 38,000 lb GTW, Tool-Free Drop-In","description":"\u003cp\u003e\u003cstrong\u003eThe CURT 60638 OEM puck gooseneck hitch kit converts Ram 2500\/3500 factory puck holes into a 2-5\/16\" gooseneck hitch rated for 38,000 lbs. GTW and 9,500 lbs. vertical load.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit supplies everything a Ram owner needs to tow heavy-duty gooseneck trailers using the truck's factory puck system. Designed specifically for Ram beds with puck receptacles, the set includes a quarter-turn latch gooseneck ball, cast-steel safety chain anchors, a protective rubber hole cover and a molded storage case to keep parts organized. Each component drops into the puck openings for tool-free installation and secure retention during use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 60638 attach to my Ram and stay secure?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses CURT’s patented quarter-turn latch and built-in retention balls in the shank to lock the gooseneck ball into the Ram’s puck. Installation is quick: align, drop in and twist to engage the latch. The retention balls prevent upward movement, keeping the ball seated under load.\n\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePatented quarter-turn latch locks ball into puck hole\u003c\/li\u003e\n\u003cli\u003eRetention balls hold shank firmly in place\u003c\/li\u003e\n\u003cli\u003eDesigned exclusively for Ram factory pucks — no bed modification\u003c\/li\u003e\n\u003cli\u003eTool-free drop-in installation for fast setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003ch3\u003eWhat towing capacity and ball size does this kit provide?\u003c\/h3\u003e\n\u003cp\u003eThe CURT 60638 is rated for up to 38,000 pounds gross trailer weight and 9,500 pounds vertical load, matching common heavy-duty gooseneck towing needs. The kit includes a 2-5\/16\" gooseneck ball, the standard size for most commercial and agricultural gooseneck couplers. This rating ensures compatibility with many flatbed, livestock and equipment trailers within those weight limits.\n\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e38,000 lbs. gross trailer weight (GTW) rating\u003c\/li\u003e\n\u003cli\u003e9,500 lbs. vertical load (tongue weight) rating\u003c\/li\u003e\n\u003cli\u003eStandard 2-5\/16\" gooseneck ball included\u003c\/li\u003e\n\u003cli\u003eEngineered for heavy-duty towing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003ch3\u003eWhat safety and protection features are included?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes heavy-duty cast-steel safety chain anchors with large loops to accept clevis-style hooks, providing a secure secondary connection for trailers. A friction-fit rubber hole cover protects the puck receptacle from water, dirt and corrosion when the ball is removed. All metal parts feature a durable powder-coat finish to resist abrasion and weathering.\n\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCast-steel safety chain anchors with large loops\u003c\/li\u003e\n\u003cli\u003eDurable powder-coat finish on metal components\u003c\/li\u003e\n\u003cli\u003eRubber hole cover prevents dirt and moisture intrusion\u003c\/li\u003e\n\u003cli\u003eMolded storage case keeps components protected and organized\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cp\u003eWho is this kit for? The CURT 60638 is intended for Ram 2500 and 3500 owners already equipped with the factory puck system who need a robust, OEM-style gooseneck solution. It’s ideal for tradespeople, ranchers and fleet operators who haul heavy flatbeds, livestock or equipment trailers and want a fast, secure, removable hitch without modifying the truck bed. If your Ram has the puck receptacles and you require a 2-5\/16\" gooseneck with up to 38K GTW capacity, this kit delivers the hardware, protection and storage to make towing easier and more reliable.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Ram 2500\/3500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this kit is made for Ram trucks equipped with the factory puck system; it will not work without the OEM puck receptacles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the ball and anchors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—both the gooseneck ball and chain anchors drop into the puck openings and use a quarter-turn latch or friction fit, requiring no tools.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CURT","offers":[{"title":"Default Title","offer_id":67584925008057,"sku":"B08GGBF8MM","price":559.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/curt-60638-front-packaging.jpg?v=1790459354"},{"product_id":"rarayc-6-7l-cummins-complete-filter-kit-for-2019-2024-ram-trucks-fuel-oil-engine-air-cabin-filters-oem-fit","title":"RARAYC 6.7L Cummins Complete Filter Kit for 2019–2024 Ram Trucks — Fuel, Oil, Engine Air \u0026 Cabin Filters, OEM Fit","description":"\u003cb\u003eComplete filtration kit for 6.7L Cummins-equipped Ram trucks that replaces factory fuel, water-separator, oil, engine air, and cabin filters for 2019–2024 models.\u003c\/b\u003e\n\n\u003cp\u003eThis RARAYC filter bundle is built to meet heavy-duty diesel service needs by combining high-efficiency media and correct OEM fitments for Ram 2500\/3500\/4500\/5500 trucks with the 6.7L Cummins turbo diesel engine (2019–2024). The kit groups the primary fuel filter, a fuel\/water separator, engine oil filter, engine air filter, and cabin air filter — each matched to Mopar\/Wix\/Purolator cross-references so installation is straightforward and replacement intervals are predictable.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit protect my Cummins fuel system?\u003c\/h3\u003e\n\u003cp\u003eThe fuel filter and the fuel\/water separator use multi-layer, high-grade media designed to trap ultra-fine particles and remove free water from diesel. That reduces injector wear and helps maintain consistent fuel flow under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-layer micro filter paper captures particles to 4 microns.\u003c\/li\u003e\n  \u003cli\u003eOuter layer separates and expels free water from the fuel stream.\u003c\/li\u003e\n  \u003cli\u003eHigh dust-holding capacity delays clogging, extending service intervals (20k–40k miles depending on conditions).\u003c\/li\u003e\n  \u003cli\u003eFactory cross-references (Mopar\/Wix\/Purolator) ensure correct fit and sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the oil, air, and cabin filters fit and perform like OEM parts?\u003c\/h3\u003e\n\u003cp\u003eEach filter in the set is manufactured to match OEM dimensions and filtration performance, using quality materials like synthetic fibers and multi-layer media. They provide proper sealing and airflow characteristics expected by Ram 6.7L diesel engines without changing mounting or service procedure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOil filter replaces Mopar 05083285AA, Purolator L45335, Wix 51607 equivalents.\u003c\/li\u003e\n  \u003cli\u003eEngine air filter matches Mopar 53034051AB and Wix 46930 dimensions.\u003c\/li\u003e\n  \u003cli\u003eCabin filter replaces Mopar 68406048AA and Wix 24579 for cabin air quality.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit form factor prevents leaks and simplifies installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will these filters last and what maintenance schedule should I follow?\u003c\/h3\u003e\n\u003cp\u003eFilter life depends on operating conditions but the materials are selected to extend service intervals versus basic single-layer media. Under normal highway and mixed-use conditions, expect fuel-filter longevity up to 20,000–40,000 miles, while oil and air filters follow typical OEM service recommendations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel filter\/media rated for extended dust capacity and water separation.\u003c\/li\u003e\n  \u003cli\u003eRecommended inspection at each oil change or during heavy-duty use.\u003c\/li\u003e\n  \u003cli\u003eAir filter life varies with environment — inspect more often in dusty conditions.\u003c\/li\u003e\n  \u003cli\u003eCabin filter typically replaced annually or per vehicle maintenance schedule.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? RARAYC’s 6.7L Cummins filter kit suits owners and fleet managers of 2019–2024 Ram 2500, 3500, 4500, and 5500 trucks who want a single, matched package of replacement filters when performing scheduled maintenance. It’s ideal for technicians, DIYers, and service departments looking for cost-effective, high-filtration replacements that match Mopar and aftermarket cross-reference numbers while improving fuel cleanliness, protecting injectors, and maintaining cabin and engine airflow.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit all 6.7L Cummins Ram trucks from 2019 to 2024?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — designed for 2019–2024 Ram 2500, 3500, 4500 and 5500 trucks with the 6.7L Cummins turbo diesel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the fuel filter remove water from diesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the fuel\/water separator and double-layer media remove free water and capture contaminants to about 4 microns.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"RARAYC","offers":[{"title":"Default Title","offer_id":67584926810297,"sku":"B0DFLZ2DBB","price":179.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rarayc-fuel-filter-front-view.jpg?v=1790459419"},{"product_id":"hikevent-alternator-160a-for-3-6l-v6-dodge-chrysler-ram-direct-fit-oem-pure-copper-windings","title":"Hikevent Alternator 160A for 3.6L V6 Dodge\/Chrysler\/Ram — Direct-Fit OEM, Pure Copper Windings","description":"\u003cp\u003e\u003cstrong\u003eThe Hikevent 160A alternator is a direct-fit replacement engineered for 3.6L V6 Dodge, Chrysler, Ram C\/V and VW Routan models from 2011–2020, delivering reliable 160-amp charging performance built to OEM standards.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis high-output alternator is designed as a plug-and-play replacement to restore charging system performance on affected vehicles. Built with die-cast aluminum housing, precision-machined components, and pure copper windings, it prioritizes heat resistance, vibration tolerance, and long-term reliability. It matches factory specifications and multiple OE part numbers so installers and DIYers can swap it in without modifying wiring or mounts.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this alternator fits my vehicle?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is confirmed by matching your vehicle’s year, make, model and engine to the listed fitments and OE part numbers. Use the product page’s \"Confirmed Fit | Make Sure This Fits\" tool to verify fit before ordering to avoid returns or installation delays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Dodge Grand Caravan, Journey (2011–2020), Avenger (2011–2014), Chrysler 200 (2011–2014)\u003c\/li\u003e\n  \u003cli\u003eAlso fits Town \u0026amp; Country (2011–2016), Ram C\/V, VW Routan, and various Journey years\u003c\/li\u003e\n  \u003cli\u003eCross-references: 421000-0770, 7B0-903-015C, P04801624AD, 68272108AA\u003c\/li\u003e\n  \u003cli\u003eOther numbers: 94174, 11068, AL6482X, AL6482N, RL801624AD\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability features does it offer?\u003c\/h3\u003e\n\u003cp\u003eThe unit uses die-cast aluminum for a lightweight, rigid housing and precision CNC machining for tight tolerances. Pure copper stator windings and external insulating coating increase electrical efficiency and protect against heat and corrosion that commonly shorten alternator life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e160-amp output suitable for higher-electrical-load systems\u003c\/li\u003e\n  \u003cli\u003ePure copper winding for improved conductivity and lower heat buildup\u003c\/li\u003e\n  \u003cli\u003eDie-cast aluminum housing resists corrosion and reduces weight\u003c\/li\u003e\n  \u003cli\u003ePrecision CNC castings to ensure consistent rotor\/stator alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this match OEM fit and function?\u003c\/h3\u003e\n\u003cp\u003eYes — Hikevent builds this alternator to meet OEM specifications so it installs and operates like the original part. That means correct mounting points, electrical connections, and charging characteristics without the need for adapters or rewiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned as a direct replacement for the factory unit\u003c\/li\u003e\n  \u003cli\u003eOEM-style electrical terminals and mounting flanges\u003c\/li\u003e\n  \u003cli\u003eEngineered to deliver steady voltage and current output under normal operating conditions\u003c\/li\u003e\n  \u003cli\u003eTested to meet common factory tolerances for fit and function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and pre-order checks should I know about?\u003c\/h3\u003e\n\u003cp\u003eHikevent includes a 1-year hassle-free warranty that covers replacement if the alternator fails under normal use during the warranty period. Before ordering, verify vehicle fit using the seller’s fitment tool and confirm OE numbers to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1-year unconditional replacement warranty included\u003c\/li\u003e\n  \u003cli\u003eConfirm fitment on the product page to prevent incorrect orders\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment and technical questions\u003c\/li\u003e\n  \u003cli\u003eInstallation recommended by a qualified technician if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Mechanics, fleet managers and owners of compatible Dodge, Chrysler, Ram C\/V and VW Routan vehicles who need a trustworthy, OEM-spec 160A alternator replacement. It’s suited for cars with higher accessory loads, owners wanting a durable aftermarket option, and anyone replacing a failing or underperforming factory alternator who needs a direct-fit, reliable charging solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this alternator plug directly into my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s designed as a direct replacement matching OEM mounting and electrical connections—verify fit with the product tool first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty comes with the Hikevent alternator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A 1-year hassle-free warranty covers replacement for defects or failures under normal use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Hikevent","offers":[{"title":"Default Title","offer_id":67584930480313,"sku":"B0FJKYT3Y2","price":238.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/hikevent-front-view-alternator_ad662863-09eb-462b-9603-bf18d2090b72.jpg?v=1790459515"},{"product_id":"adcarlights-halogen-headlight-assembly-for-2006-2009-dodge-ram-1500-2500-old-body-style-oe-fit-ip65-sealed","title":"ADCARLIGHTS Halogen Headlight Assembly for 2006-2009 Dodge Ram 1500\/2500 Old-Body Style — OE Fit, IP65 Sealed","description":"\u003cp\u003e\u003cstrong\u003eADCARLIGHTS halogen headlight assemblies designed to directly replace OE units for 2006–2009 Dodge Ram 1500 and compatible 2500\/3500 old-body-style trucks provide improved clarity, weather resistance, and plug-and-play installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement halogen headlights are crafted to match the original equipment Type for 2006–2008 Dodge Ram 1500\/2500\/3500 and certain 2009 Ram 2500\/3500 old-body-style trucks. They are not compatible with models that have a bottom amber reflector. Built with high-transmittance polycarbonate lenses and a durable housing, they offer clearer light output and a sealed design to resist moisture and road contaminants. Bulbs are sold separately, allowing you to choose the halogen bulb type and output that suits your driving needs.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these headlights improve nighttime visibility?\u003c\/h3\u003e\n\u003cp\u003eThe ADCARLIGHTS assemblies use a high-transmittance PC lens with UV coating to maximize the light passing through the lens and reduce yellowing over time. While they are halogen-compatible, the clearer lens and accurate reflector geometry help produce more usable light on the road compared with aged or fogged originals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-transmittance polycarbonate lens for clearer beam projection\u003c\/li\u003e\n  \u003cli\u003eUV coating to slow lens discoloration and maintain output\u003c\/li\u003e\n  \u003cli\u003eReflector design tuned for halogen bulbs to improve road illumination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these headlights fit my Dodge Ram without modification?\u003c\/h3\u003e\n\u003cp\u003eYes — these are made to the OE Type fitment for the specified model years and body styles, offering a straightforward, plug-and-play swap. No cutting, drilling, or wiring changes are required when matched to the correct truck application.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% OE type fit for 2006–2008 Ram 1500\/2500\/3500 and select 2009 Ram 2500\/3500 old-body-style\u003c\/li\u003e\n  \u003cli\u003eDirect connector compatibility for factory wiring harnesses\u003c\/li\u003e\n  \u003cli\u003eDesigned to mount using existing factory hardware and brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these headlight assemblies in wet or harsh conditions?\u003c\/h3\u003e\n\u003cp\u003eThe housings are built to be watertight and rated IP65, offering reliable protection against rain and road spray. The heavy-duty casing and gasketed seams reduce the risk of fogging and ingress, preserving performance season after season.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65-rated sealing to block water and dust intrusion\u003c\/li\u003e\n  \u003cli\u003eRobust housing construction for road-impact resistance\u003c\/li\u003e\n  \u003cli\u003eGasketed joints to prevent internal moisture and condensation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support is available if I have questions or fitment issues?\u003c\/h3\u003e\n\u003cp\u003eADCARLIGHTS provides customer assistance through the store's \"Ask a question\" feature for any installation questions or concerns. The brand commits to responsive support to help troubleshoot fitment or function so you can get back on the road quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContact via the product page \"Ask a question\" button\u003c\/li\u003e\n  \u003cli\u003eSupport for fitment guidance and troubleshooting\u003c\/li\u003e\n  \u003cli\u003eManufacturer stands behind product quality and compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These headlight assemblies are intended for owners of 2006–2008 Dodge Ram 1500\/2500\/3500 and 2009 Ram 2500\/3500 old-body-style trucks who need a direct OE-type replacement that restores lens clarity and provides reliable weatherproof performance. Choose these lights if you prefer a plug-and-play swap, want a durable sealed housing, and plan to select your preferred halogen bulbs separately. Do not purchase if your truck has a bottom amber reflector, as this product will not fit those configurations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit a 2009 Dodge Ram 2500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they fit 2009 Ram 2500\/3500 old-body-style trucks but are not compatible with models that have a bottom amber reflector.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs included with the headlights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, bulbs are not included so you can choose the halogen bulbs that match your preferred brightness and color temperature.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ADCARLIGHTS","offers":[{"title":"Default Title","offer_id":67584936804537,"sku":"B0B28NWS8Q","price":325.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/adcarlights-front-assembly_06786a92-9a27-433f-9594-c861dd2ad9b5.jpg?v=1790459815"},{"product_id":"adcarlights-halogen-headlight-assembly-for-2010-2018-dodge-ram-1500-2500-direct-oe-fit-improved-brightness","title":"ADCARLIGHTS Halogen Headlight Assembly for 2010–2018 Dodge Ram 1500\/2500 — Direct OE Fit, Improved Brightness","description":"\u003cp\u003e\u003cstrong\u003eADCARLIGHTS halogen headlight assembly designed to be a direct OE-fit replacement for select 2010–2018 Dodge Ram 1500 and 2500 models offering improved brightness, weatherproofing, and plug-and-play installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aftermarket headlight from ADCARLIGHTS is built by an ISO-certified automotive lighting manufacturer to match factory mounting points and wiring for compatible Dodge Ram trucks. It uses a high-transmittance polycarbonate lens with UV coating and a robust housing to deliver clearer illumination and long-term durability while resisting water ingress and road debris. The assembly targets owners who need a reliable, like-for-like replacement that improves visibility without vehicle modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Dodge Ram models and years will this headlight fit?\u003c\/h3\u003e\n\u003cp\u003eThis headlight is engineered to fit specific trims of Dodge Ram 1500 and 2500 trucks between 2010 and 2018. It is compatible with many Laramie, SLT, Big Horn, Express, Lone Star, Limited, Rebel and Longhorn configurations listed by the manufacturer, but it is not universal across all 2009–2018 Ram variants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2010–2012 Laramie Longhorn; 2012 SLT, Laramie; 2013–2018 SLT, Big Horn, Express, Lone Star, Laramie, Laramie Longhorn, Limited, Rebel\u003c\/li\u003e\n  \u003cli\u003eNot compatible: 2009 Ram series or 2010–2011 ST\/SLT\/TRX variants\u003c\/li\u003e\n  \u003cli\u003eAlso not for 2012 ST\/TRX or 2013–2018 Tradesman\/ST\/SXT models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this headlight improve on the original equipment lighting?\u003c\/h3\u003e\n\u003cp\u003eThe ADCARLIGHTS assembly uses a higher-transmittance PC lens and precision optics to boost forward brightness and optical clarity. While retaining the halogen bulb format, the design aims to produce up to 200% brighter perceived light compared with typical worn or yellowed factory lenses, improving visibility without altering beam pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-transmittance polycarbonate lens with UV coating for clearer light\u003c\/li\u003e\n  \u003cli\u003eOptical design tuned to maintain proper beam cutoff and spread\u003c\/li\u003e\n  \u003cli\u003eMaterials chosen to exceed common OEM durability standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and will it require wiring or modifications?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be plug-and-play using the truck’s original mounts and connectors so no cutting, splicing, or custom wiring should be necessary. The assembly is built to drop into factory locations; however, basic hand tools and safe removal of the old unit are required. If unsure, consult a professional installer to ensure proper alignment and secure sealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OE-style fitment for straightforward replacement\u003c\/li\u003e\n  \u003cli\u003eNo permanent wiring changes or vehicle modifications expected\u003c\/li\u003e\n  \u003cli\u003eRecommended: test connectors and bulbs before final mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the unit handle weather and road conditions?\u003c\/h3\u003e\n\u003cp\u003eThese headlights carry an IP65-grade sealing and a heavy-duty housing to resist water spray and dust intrusion common in wet or snowy driving. The lens’ UV coating reduces yellowing from sun exposure, and the watertight seals help prevent condensation inside the lamp cavity for longer reliable service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65-rated waterproof sealing for rain and snow resistance\u003c\/li\u003e\n  \u003cli\u003eUV-coated lens to reduce solar degradation and yellowing\u003c\/li\u003e\n  \u003cli\u003eDurable housing and gaskets to minimize moisture entry and fogging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This ADCARLIGHTS halogen headlight assembly is aimed at Dodge Ram owners (2010–2018) who need a dependable, OEM-style replacement that improves brightness and resists weathering without modifying the vehicle. Choose this product if you want an ISO-manufactured, plug-and-play headlamp with enhanced lens clarity and long-term service support; verify compatibility with your truck’s exact year and trim before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this headlight fit my 2014 Dodge Ram 1500 SLT?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this ADCARLIGHTS assembly is compatible with 2013–2018 SLT models, but confirm trim and connector match before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require rewiring or modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it’s designed as a plug-and-play OE-style replacement with no permanent wiring changes expected.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ADCARLIGHTS","offers":[{"title":"Default Title","offer_id":67584936837305,"sku":"B089ZXV3PC","price":307.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/adcarlights-front-assembly.jpg?v=1790459815"},{"product_id":"adcarlights-halogen-headlight-assemblies-for-2002-2005-dodge-ram-1500-2500-oe-fit-brighter-optics-weatherproof","title":"ADCARLIGHTS Halogen Headlight Assemblies for 2002–2005 Dodge Ram 1500\/2500 — OE-fit, Brighter Optics, Weatherproof","description":"\u003cp\u003e\u003cstrong\u003eADCARLIGHTS halogen headlight assemblies replace the original 2002–2005 Dodge Ram 1500 and 2500 units with a direct OE-fit, brighter optics, and weatherproof construction.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese replacement halogen headlight assemblies are built to match the original equipment fit and function for Dodge Ram pickups from model years 2002 through 2005 (1500, and 2500\/3500 where applicable). Designed with high-transmittance polycarbonate lenses, UV coating, and sealed housings, the lights provide improved light output and long-term durability while installing with a simple plug-and-play process. Below are practical answers to common buyer questions so you can quickly judge fitment, performance, and installation needs.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my 2002–2005 Dodge Ram without modifications?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the ADCARLIGHTS assemblies are produced to match the original mounting points and electrical connectors for the listed Dodge Ram years and models. You should not need additional brackets, splicing, or rewiring.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFull OE-style fitment for 2002–2005 Ram 1500 and 2003–2005 Ram 2500\/3500 models.\u003c\/li\u003e\n  \u003cli\u003eUses the OEM part references for alignment and compatibility.\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct plug-in to the factory harness and fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much brighter and clearer are these compared to worn factory lights?\u003c\/h3\u003e\n\n\u003cp\u003eThese replacement heads feature high-transmittance polycarbonate lenses and an added UV coating to resist yellowing, which produces noticeably clearer light output versus aged lenses. The result is better beam clarity and more effective illumination of road edges and hazards at night.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eApproximately 200% improved transmittance relative to degraded factory lenses.\u003c\/li\u003e\n  \u003cli\u003eUV-coated lens helps prevent clouding and extends optical life.\u003c\/li\u003e\n  \u003cli\u003ePrecision reflector and lens geometry preserve correct beam pattern.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the lights weatherproof and suitable for all-season use?\u003c\/h3\u003e\n\n\u003cp\u003eYes. ADCARLIGHTS assemblies are built with sealed housings and an IP65-rated design to keep out moisture and debris, so they tolerate rain, road spray, and typical driving conditions. The rugged construction also helps protect internal components from corrosion and dust.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWatertight seals prevent fogging and water intrusion.\u003c\/li\u003e\n  \u003cli\u003eDurable housings withstand road impacts and temperature changes.\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist dust and splashes for reliable everyday performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is the installation and what support is available?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows a simple plug-and-play approach: unbolt the old assembly, unplug the factory connector, attach the new headlight, and secure it in place. If you encounter any fitment questions or performance issues, ADCARLIGHTS offers responsive customer support via the Ask a question feature.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play electrical connections—no cutting or splicing required.\u003c\/li\u003e\n  \u003cli\u003eMounting points match the factory locations for quick replacement.\u003c\/li\u003e\n  \u003cli\u003eManufacturer support available for troubleshooting and guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who own a 2002–2005 Dodge Ram 1500 or 2003–2005 Ram 2500\/3500 and need a reliable, like-for-like halogen headlight replacement will benefit most from these assemblies. They are ideal for owners replacing yellowed, cracked, or underperforming lights who want a direct OE-style swap with improved lens clarity, sealed durability, and simple installation—plus follow-up support if any questions arise.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights require wiring modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No wiring changes are necessary; they use the factory connectors for a direct plug-and-play installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these compatible with both 1500 and 2500 Ram models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—designed for 2002–2005 Ram 1500 and 2003–2005 Ram 2500\/3500 OE-type fitment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ADCARLIGHTS","offers":[{"title":"Default Title","offer_id":67584936902841,"sku":"B08B3DPFDM","price":242.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/adcarlights-front-assembly-dodge-ram.jpg?v=1790459816"},{"product_id":"adcarlights-halogen-headlight-assemblies-for-2006-2009-dodge-ram-old-body-pair-oe-fit-uv-coated-lenses","title":"ADCARLIGHTS Halogen Headlight Assemblies for 2006-2009 Dodge Ram (Old Body) — Pair, OE Fit \u0026 UV-Coated Lenses","description":"\u003cp\u003e\u003cstrong\u003eADCARLIGHTS halogen headlight assemblies replace the OE-style units for 2006–2008 Dodge Ram 1500\/2500\/3500 and 2009 Ram 2500\/3500 old-body trucks, delivering clearer optics and a direct-fit installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of halogen headlights is engineered to match original equipment fitment for select Dodge Ram models (old-body style only). They are built with high-transmittance polycarbonate lenses, weatherproof housings, and plug-and-play connectors so you can swap factory lights without modifying wiring or mounting points. Note that bulbs are not supplied and these units are not compatible with 2009 new-body Ram models or trucks that have the amber bottom reflector\/cab clearance light configurations.\u003c\/p\u003e\n\n\u003ch3\u003eWill these headlights fit my Dodge Ram?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies are designed for OE type fitment on 2006–2008 Dodge Ram 1500\/2500\/3500 and 2009 Ram 2500\/3500 with the old body style. They will not fit vehicles that use the newer 2009 body style, models with a bottom amber reflector bar, or rigs with amber cab clearance lights.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for OE-style mounting locations and clips\u003c\/li\u003e\n  \u003cli\u003eCompatible with factory headlight mounts and housings of listed models\u003c\/li\u003e\n  \u003cli\u003eNot for models with amber side marker\/bottom amber bar\u003c\/li\u003e\n  \u003cli\u003eBulbs must be purchased separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much brighter and clearer are these compared to stock?\u003c\/h3\u003e\n\u003cp\u003eThe lens uses a high-transmittance polycarbonate material with a UV protective coating to reduce yellowing and preserve clarity. That results in improved light output and longer visual clarity compared with older, oxidized stock lenses, helping you see road details more reliably.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-transmittance PC lens for better light passage\u003c\/li\u003e\n  \u003cli\u003eUV coating resists discoloration and maintains clarity\u003c\/li\u003e\n  \u003cli\u003eOptimized reflector geometry for even beam distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult—do I need special tools or wiring?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward and requires no cutting or splicing. The assemblies use factory-style connectors and mounting points so they install like original headlights. Basic hand tools are typically all that’s required for removal and replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connectors—no wiring changes\u003c\/li\u003e\n  \u003cli\u003eDirect-fit mounting aligns with stock bolt patterns\u003c\/li\u003e\n  \u003cli\u003eSimple bulb installation (bulbs not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these headlights weather-resistant and durable?\u003c\/h3\u003e\n\u003cp\u003eEach unit is sealed to prevent moisture intrusion and built with a durable housing suitable for daily driving and variable weather. The IP65-level protection helps keep out dust and low-pressure water jets, reducing the risk of fogging or seepage in rain and wet conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWatertight seal to reduce condensation and leaks\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty housing for road-condition resilience\u003c\/li\u003e\n  \u003cli\u003eUV-coated lens to resist sun damage and aging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers who own a 2006–2008 Dodge Ram 1500\/2500\/3500 or a 2009 Ram 2500\/3500 old-body truck and need a direct-fit, durable headlight replacement with improved lens clarity. These assemblies suit restorations, repairs after collision damage, or upgrades from aged, hazed stock headlights. If your Ram has an amber bottom reflector bar, new-body 2009 styling, or special cab clearance lighting, these units are not appropriate. For fitment questions or help getting the product working properly, ADCARLIGHTS support is available via the \"Ask a question\" option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights include bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Bulbs are not included; you will need to purchase compatible halogen bulbs separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit a 2009 Dodge Ram with the new body style?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These are for the 2009 old-body Ram 2500\/3500 only and not compatible with the 2009 new-body style.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ADCARLIGHTS","offers":[{"title":"Default Title","offer_id":67584937296057,"sku":"B08B18S97S","price":341.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/adcarlights-front-assembly-view.jpg?v=1790459860"},{"product_id":"powerstop-z36-truck-tow-front-brake-pads-for-ram-2500-3500-carbon-fiber-ceramic-low-dust","title":"PowerStop Z36 Truck \u0026 Tow Front Brake Pads for Ram 2500\/3500 – Carbon-Fiber Ceramic, Low-Dust","description":"\u003cp\u003e\u003cstrong\u003ePowerStop Evolution Z36-2223 front Truck \u0026amp; Tow brake pad set is a direct-fit carbon-fiber ceramic upgrade built to improve stopping power, reduce dust, and withstand towing, hauling, and heavy-duty driving.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ram 2500 or 3500 sees heavy loads, trailer towing, off-highway climbs, or oversized wheels, the Z36 Truck \u0026amp; Tow pads are engineered to meet those demands without modifying your braking system. This kit replaces the OE front pads with a carbon-fiber reinforced ceramic compound, and includes stainless-steel installation hardware so you can complete a bolt-on swap quickly. The design focuses on stronger bite, fade resistance under repeated braking, and quieter operation with lower dusting than many semi-metallic options.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these pads perform when towing heavy trailers?\u003c\/h3\u003e\n\u003cp\u003eThe Z36 compound combines ceramic materials with carbon reinforcement to retain friction under increased temperatures created by towing. You get clearer pedal feel and more consistent stopping distances over extended descents where fade can occur.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon-fiber ceramic formula for heat stability\u003c\/li\u003e\n  \u003cli\u003eEngineered to resist brake fade during prolonged downhill braking\u003c\/li\u003e\n  \u003cli\u003eStainless-steel shims reduce noise while keeping consistent pad contact\u003c\/li\u003e\n  \u003cli\u003eIncludes installation hardware for a proper fit without modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these pads be noisy or create excessive dust on my wheels?\u003c\/h3\u003e\n\u003cp\u003ePowerStop designed the Z36 pads to be noticeably quieter than many performance or heavy-duty compounds. The low-dust ceramic formulation cuts wheel residue while stainless-steel shims and precise backing plates help minimize vibration and squeal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-dust ceramic reduces wheel grime and cleanup\u003c\/li\u003e\n  \u003cli\u003eNoise-reducing stainless shims included\u003c\/li\u003e\n  \u003cli\u003eConsistent daily drivability with improved performance under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these pads difficult to install and do they require other parts?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be a straightforward, bolt-on replacement using the supplied stainless-steel hardware. No machining, special tools, or rotor changes are required for a proper fit in compatible models, though rotors should be inspected for wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete front pad kit with installation hardware included\u003c\/li\u003e\n  \u003cli\u003eDirect-fit for listed vehicle applications — no modification needed\u003c\/li\u003e\n  \u003cli\u003eQuick DIY swap for those comfortable with basic brake service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these pads compared with original equipment?\u003c\/h3\u003e\n\u003cp\u003eThe Z36 pads are formulated to deliver longer life and more reliable performance under severe-duty use than many standard OE compounds. Their carbon-fiber reinforcement and ceramic base aim to balance longevity with the increased demands of towing and heavier vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbon-fiber ceramic compound for extended durability\u003c\/li\u003e\n  \u003cli\u003eStable friction across temperature ranges to limit premature wear from overheating\u003c\/li\u003e\n  \u003cli\u003eBacked by PowerStop’s limited performance protection warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These PowerStop Z36-2223 front Truck \u0026amp; Tow pads are for Ram 2500 and 3500 owners (2019–2025) who tow trailers, haul heavy loads, run lifted\/modified setups, or simply want a more robust, low-dust braking upgrade without changing rotors or brake hardware. They suit drivers seeking improved fade resistance and quieter operation while keeping installation straightforward.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which vehicles fit the PowerStop Z36-2223 front pads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits front brakes of 2019–2025 Ram 2500 and 2019–2025 Ram 3500 models. Verify fitment before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include installation hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes stainless-steel installation hardware for a direct-fit, bolt-on installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PowerStop","offers":[{"title":"Default Title","offer_id":67584939753657,"sku":"B08D2FCVXZ","price":206.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/powerstop-z36-2223-front-kit-packaging.jpg?v=1790459979"},{"product_id":"lathsy-tail-light-for-dodge-ram-1500-passenger-side-2019-2023-chrome-bezel-bulb-included","title":"Lathsy Tail Light for Dodge Ram 1500 Passenger Side 2019-2023 — Chrome Bezel, Bulb Included","description":"\u003cp\u003e\u003cstrong\u003eReplacement passenger-side tail light designed for 2019–2023 Dodge Ram 1500 (non-Classic, non-LED) with chrome bezel and included bulb.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Lathsy tail light is a direct-fit aftermarket replacement for the right (passenger) side of Dodge Ram 1500 trucks from model years 2019 through 2023 — excluding Ram 1500 Classic and LED-equipped variants. It ships with the bulb pre-installed, a chrome bezel for factory-style appearance, and seals intended to keep out moisture and fog. The unit replaces OE number 55112988AE and is built for quick swap-in replacement; professional installation or guidance is recommended if you're unfamiliar with vehicle lighting work.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tail light fit my 2019–2023 Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eThis part fits standard-config Dodge Ram 1500 trucks from 2019 through 2023 that use the halogen-style tail light assembly. It is not compatible with Ram 1500 Classic models or pickup trucks that came equipped from the factory with LED tail lights.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2019, 2020, 2021, 2022, 2023 (standard models).\u003c\/li\u003e\n  \u003cli\u003eNot compatible with: Ram 1500 Classic or factory LED-tail assemblies.\u003c\/li\u003e\n  \u003cli\u003eReplaces OE part number: 55112988AE for correct fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is designed for a straightforward swap of the passenger-side unit and comes with the bulb already installed to simplify replacement. No printed instructions are included, so novice installers should consult a video tutorial or seek professional installation to avoid alignment or wiring issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: complete tail light assembly with chrome bezel and bulb installed.\u003c\/li\u003e\n  \u003cli\u003eTools typically required: basic hand tools and a small socket set.\u003c\/li\u003e\n  \u003cli\u003eTime estimate: a competent DIYer can complete the swap in minutes; allow more time if accessing through bed or inner trim.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this unit handle weather and road conditions?\u003c\/h3\u003e\n\u003cp\u003eLathsy tail lights are built with exterior sealing intended to resist water intrusion and minimize internal fogging under normal weather exposure. Good sealing helps protect the bulb and internal components from moisture and road splash, but proper installation is essential to maintain the seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSealing features designed to reduce water and fog build-up inside the lens.\u003c\/li\u003e\n  \u003cli\u003eDurable chrome bezel offers corrosion resistance and factory-style appearance.\u003c\/li\u003e\n  \u003cli\u003eInspect seals after installation to ensure a tight fit and long-term protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat about warranty, replacements, and quality checks?\u003c\/h3\u003e\n\u003cp\u003eLathsy inspects parts before shipping and offers replacements if the tail light arrives damaged from transit or fails to function out of the box. Document any shipping damage immediately so you can request a replacement quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement offered for shipping damage or non-working units upon arrival.\u003c\/li\u003e\n  \u003cli\u003eRecommend testing electrical function before final reassembly.\u003c\/li\u003e\n  \u003cli\u003eContact seller with photos and order details for faster resolution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers and repair shops seeking a cost-effective, factory-style passenger-side tail light replacement for a 2019–2023 Dodge Ram 1500 (non-Classic, non-LED) will find this Lathsy assembly suitable. It’s aimed at owners who want a quick, plug-and-play swap with a chrome bezel for a stock look and solid sealing to withstand everyday weather. If you need an LED-specific unit or parts for a Ram 1500 Classic, choose the correct OEM or LED-compatible option instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit Ram 1500 Classic or LED models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Lathsy tail light is not compatible with Ram 1500 Classic or factory LED tail light models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the bulb included and does it come with instructions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the bulb is included, but no printed installation guide is provided; a video or professional install is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lathsy","offers":[{"title":"Default Title","offer_id":67584940015801,"sku":"B0DB5KV66C","price":183.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lathsy-tail-light-front-view.jpg?v=1790459999"},{"product_id":"zaposts-towing-side-mirror-for-dodge-ram-1500-2500-3500-driver-side-2002-2009-power-heated-manual-fold","title":"ZAPOSTS Towing Side Mirror for Dodge Ram 1500\/2500\/3500 Driver Side (2002–2009) — Power Heated, Manual Fold","description":"\u003cp\u003e\u003cstrong\u003eZAPOSTS driver-side towing mirror replaces the factory unit on compatible 2002–2009 Dodge Ram trucks, offering power-heated glass and a manual foldaway housing for safer towing visibility.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ZAPOSTS towing side mirror is engineered as a direct-fit replacement for specific Dodge Ram pickup models, matching the original mounting and wiring points to simplify installation. It gives a cost-effective aftermarket option with the same basic functions as many dealer mirrors — power heat for clearer sight in cold weather and a manual fold feature to protect the mirror when parked or navigating tight spaces. Professional installation is recommended to ensure all electrical connections and adjustments are correct.\u003c\/p\u003e\n\n\u003ch3\u003eWill this mirror fit my Dodge Ram model and year?\u003c\/h3\u003e\n\n\u003cp\u003eThis mirror is designed specifically for the listed Dodge Ram pickups and replaces the factory driver-side tow mirror on compatible vehicles. Verify your truck’s year and trim before purchase; mirrors not matched to your model may not operate correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Dodge Ram 1500: model years 2002–2008.\u003c\/li\u003e\n  \u003cli\u003eFits Dodge Ram 2500 and 3500: model years 2003–2009.\u003c\/li\u003e\n  \u003cli\u003eDriver-side only — purchase the passenger mirror separately if needed.\u003c\/li\u003e\n  \u003cli\u003eOnly compatible with trucks that have the same power-heated mirror wiring and mounting configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the power-heated function help when towing?\u003c\/h3\u003e\n\n\u003cp\u003eThe power-heated glass clears ice and light condensation from the mirror surface so you retain rear and side visibility in cold or damp conditions. This feature helps maintain a safer view when towing trailers or hauling loads in adverse weather, while the larger tow-style mirror profile improves side coverage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eElectric heat reduces frost and fog buildup quickly.\u003c\/li\u003e\n  \u003cli\u003eHeated surface maintains clearer visibility during drives in cold climates.\u003c\/li\u003e\n  \u003cli\u003eDesigned to tie into the vehicle’s existing mirror heating circuit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the mirror’s mechanical features and how do they protect the unit?\u003c\/h3\u003e\n\n\u003cp\u003eThe housing includes a manual fold mechanism so you can pivot the mirror inward when parking or passing through narrow spaces to prevent damage. The flipping-up tilt function on the tow mirror also helps you extend the field of view when needed for trailer maneuvers and then return to the standard position for normal driving.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eManual foldable housing for protection in tight areas.\u003c\/li\u003e\n  \u003cli\u003eFlip-up\/extended position improves side visibility while towing.\u003c\/li\u003e\n  \u003cli\u003eDurable black finish matches many factory mirror housings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and compatibility limits?\u003c\/h3\u003e\n\n\u003cp\u003eThis mirror installs using the vehicle’s original mounting points and wiring harness patterns when matched to the correct model years. Because variations exist across trims and aftermarket wiring, professional installation is recommended to confirm compatibility and to avoid damage to wiring or mirror motors.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInstalls like the factory mirror on listed years — alignment of mounts is critical.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended for electrical connections and final adjustment.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Ram models outside the specified years or different mirror function packages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This ZAPOSTS driver-side towing mirror is aimed at Dodge Ram owners (2002–2009 model years per listing) seeking a direct-fit, cost-efficient replacement with heated glass and a manual fold option. It’s suitable for drivers who tow trailers or need improved side coverage but want an aftermarket alternative to dealer-priced parts; have a pro check fitment and handle installation for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this mirror heated and which side does it fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it is power-heated glass and fits the driver side of listed Dodge Ram model years.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need professional help to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Professional installation is recommended to ensure correct wiring and secure fitment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ZAPOSTS","offers":[{"title":"Default Title","offer_id":67584940277945,"sku":"B0B15BDXTK","price":246.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/zaposts-driver-side-front-view.jpg?v=1790460048"},{"product_id":"lathsy-led-tail-light-2019-2024-dodge-ram-1500-driver-side-black-cover-direct-fit-preinstalled-bulbs","title":"Lathsy LED Tail Light 2019-2024 Dodge Ram 1500 Driver Side Black Cover, Direct-Fit, Preinstalled Bulbs","description":"\u003cp\u003e\u003cstrong\u003eLathsy's driver-side LED tail light for 2019–2024 Dodge Ram 1500 delivers a direct-fit, black-cover replacement with blind-spot compatibility and preinstalled bulbs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade a damaged or worn rear lamp with this ready-to-install Lathsy LED tail light engineered to match the 2019–2024 Ram 1500 body lines (not for Ram 1500 Classic). It replaces OE number 68262533AH and is supplied with bulbs installed and a sealed housing designed to resist water and fog. The unit is compatible with blind spot detection systems but does not include the blind spot module; professional or video-assisted installation is recommended for best results.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tail light fit my 2019–2024 Dodge Ram 1500?\u003c\/h3\u003e\n\n\u003cp\u003eYes, this Lathsy driver-side LED tail light is made to fit 2019–2024 Ram 1500 models that use part number 68262533AH. It is not compatible with Ram 1500 Classic trucks, so verify your model year and trim before purchasing. If you are uncertain, compare the existing tail light part number or consult your dealer.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect OE replacement for part 68262533AH\u003c\/li\u003e\n  \u003cli\u003eFits 2019–2024 Dodge Ram 1500 (excluding Classic)\u003c\/li\u003e\n  \u003cli\u003eDriver-side (left) assembly with preinstalled bulbs\u003c\/li\u003e\n  \u003cli\u003eBlind spot compatible—module not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what comes in the box?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for someone with basic mechanical skills and common hand tools; many owners complete the swap in minutes. The assembly arrives with bulbs preinstalled but no printed instructions, so watching an online installation walkthrough or hiring a professional is advised if you’re unfamiliar with vehicle electrical connections.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncluded: driver-side LED tail light assembly with bulbs\u003c\/li\u003e\n  \u003cli\u003eNot included: blind spot module, printed installation guide\u003c\/li\u003e\n  \u003cli\u003eSuggested tools: socket set, screwdriver, trim removal tool\u003c\/li\u003e\n  \u003cli\u003eRecommended: view a video or use a professional installer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Lathsy tail light handle weather and durability?\u003c\/h3\u003e\n\n\u003cp\u003eThe housing features improved sealing to reduce the chance of moisture intrusion, helping prevent fogging and corrosion in wet or cold conditions. Lathsy inspects units before shipping and provides replacement support if the tail light arrives damaged or is nonfunctional due to shipping issues.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSealed housing to resist water and fog build-up\u003c\/li\u003e\n  \u003cli\u003eDurable LED and wiring construction for consistent performance\u003c\/li\u003e\n  \u003cli\u003eQuality check before shipment and damage replacement policy\u003c\/li\u003e\n  \u003cli\u003eDesigned to match original mounting points for a snug fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical or vehicle compatibility checks should I make?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm your truck’s electrical harness and blind spot sensor wiring match the replacement assembly; this unit supports blind spot functionality but does not include the control module. If your vehicle uses a separate module, ensure it is present and compatible or have a technician perform wiring verification to prevent error codes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with vehicles using blind spot detection wiring\u003c\/li\u003e\n  \u003cli\u003eNo blind spot module included—retain factory module if needed\u003c\/li\u003e\n  \u003cli\u003eCompare connector types and pin layout before installation\u003c\/li\u003e\n  \u003cli\u003eProfessional diagnosis recommended if warning lights appear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers of 2019–2024 Dodge Ram 1500 (non-Classic) who need a cost-effective, OEM-style driver-side tail light replacement with ready-installed bulbs and improved sealing. It’s ideal for owners replacing a cracked or faded housing who want a modern LED look and blind spot compatibility, and for DIYers comfortable following vehicle wiring and installation videos or for those who will use a qualified installer.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with Ram 1500 Classic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This driver-side unit fits 2019–2024 Ram 1500 models but is not compatible with Ram 1500 Classic.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the tail light include the blind spot module?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The assembly is blind spot compatible but does not include the blind spot control module.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lathsy","offers":[{"title":"Default Title","offer_id":67584941523129,"sku":"B0DB5PK3NN","price":282.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lathsy-driver-side-tail-light-front-view.jpg?v=1790460115"},{"product_id":"lathsy-led-tail-light-for-dodge-ram-1500-driver-side-2019-2024-red-lens-blind-spot-compatible-pre-installed-bulbs","title":"Lathsy LED Tail Light for Dodge Ram 1500 Driver Side 2019-2024 — Red Lens, Blind-Spot Compatible, Pre-Installed Bulbs","description":"\u003cp\u003e\u003cstrong\u003eLathsy's LED tail light for the driver side fits 2019–2024 Dodge Ram 1500 (non-Classic) and replaces OE# 68262531AH with a blind-spot compatible red lens.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis direct-replacement taillight assembly from Lathsy offers an OEM-style fit and LED illumination for improved visibility and a refreshed rear-end appearance. It arrives pre-assembled with bulbs installed, sealed against moisture, and designed to work with vehicles equipped for a blind-spot system (note: the blind-spot module is not included). The unit is intended as a plug-and-play swap for compatible Ram 1500 models and is backed by replacement coverage for shipping damage or functional failures on arrival.\u003c\/p\u003e\n\n\u003ch3\u003eWill this taillight fit my Dodge Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eThis Lathsy LED driver-side assembly is compatible with 2019 through 2024 Dodge Ram 1500 trucks that are not the Ram 1500 Classic. Check your existing OE number—68262531AH—to confirm a direct match. If your vehicle has a blind-spot system, this lens is made to accommodate that feature, though the blind-spot module itself is not included.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible model years: 2019, 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Ram 1500 Classic models\u003c\/li\u003e\n  \u003cli\u003eOE replacement number: 68262531AH\u003c\/li\u003e\n  \u003cli\u003eBlind-spot physically compatible; module must be retained from your original unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eThe assembly ships with bulbs pre-installed so most owners can replace the old unit within minutes using basic hand tools. Lathsy does not include printed instructions, so we recommend watching an installation video or having a professional handle it if you prefer. No blind-spot electronic module is supplied—reinstall your original module if required by your truck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-installed bulbs: included\u003c\/li\u003e\n  \u003cli\u003eTools typically required: socket wrench, trim removal tool\u003c\/li\u003e\n  \u003cli\u003eInstallation time: often under 30 minutes for an experienced DIYer\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if unfamiliar with vehicle wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this taillight withstand weather and shipping damage?\u003c\/h3\u003e\n\u003cp\u003eThe Lathsy assembly features robust sealing to reduce the risk of water intrusion and fogging in demanding climates. During transit, the product is protected; and Lathsy will replace the set if it arrives damaged or does not function correctly out of the box. Proper sealing also helps maintain long-term performance and appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWater-resistant sealing to prevent fog and moisture\u003c\/li\u003e\n  \u003cli\u003ePackaged to minimize shipping damage\u003c\/li\u003e\n  \u003cli\u003eReplacement offered for units damaged during shipping\u003c\/li\u003e\n  \u003cli\u003eLED design improves durability compared to older filament-style lenses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about compatibility with blind-spot features?\u003c\/h3\u003e\n\u003cp\u003eThe housing is manufactured to accept the blind-spot sensor hardware used in factory setups, but it does not include the electronic blind-spot module. If your truck came with blind-spot detection, transfer the module from your original taillight to this replacement unit. Without the module, blind-spot alerts will not function even though the housing physically supports it.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHousing compatible with blind-spot sensor mounting\u003c\/li\u003e\n  \u003cli\u003eBlind-spot module: must be reused from the original part\u003c\/li\u003e\n  \u003cli\u003eElectrical connectors match OEM sockets on compatible trucks\u003c\/li\u003e\n  \u003cli\u003eConfirm module transfer before installation if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Lathsy LED driver-side taillight is intended for Ram 1500 owners (2019–2024, non-Classic) who want a direct-fit replacement with modern LED illumination, reliable weather sealing, and blind-spot housing compatibility. It’s a good choice for DIYers comfortable with modest vehicle disassembly and for professionals replacing a damaged factory unit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit Ram 1500 Classic models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Lathsy assembly fits 2019–2024 Ram 1500 non-Classic models only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the blind-spot module included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The housing supports blind-spot hardware, but you must transfer your original blind-spot module.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lathsy","offers":[{"title":"Default Title","offer_id":67584941621433,"sku":"B0DB5PJVFJ","price":288.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lathsy-tail-light-driver-side-front-view_5ecb6b5a-1f05-4b31-a541-159e3dabc9b6.jpg?v=1790460140"},{"product_id":"lathsy-led-tail-light-dodge-ram-1500-2019-2024-passenger-side-black-cover-plug-play-blind-spot","title":"Lathsy LED Tail Light Dodge Ram 1500 2019–2024 Passenger Side, Black Cover, Plug‑Play \u0026 Blind‑Spot","description":"\u003cstrong\u003eLathsy's LED tail light for the 2019–2024 Dodge Ram 1500 (passenger side) is a plug-and-play replacement with a black cover, blind‑spot compatibility, and included bulbs for quick, durable upgrades.\u003c\/strong\u003e\n\n\u003cp\u003eThis passenger-side tail light assembly from Lathsy is built to match OE fit and finish while adding a contemporary LED look. Designed specifically for 2019 through 2024 Ram 1500 models (not compatible with Ram 1500 Classic), it replaces OE part number 68263397AE and supports vehicles equipped with blind‑spot systems—note the kit accommodates blind‑spot wiring but does not include the blind‑spot module itself. The housing comes with bulbs installed, good weather sealing, and a black lens cover for a modern appearance.\u003c\/p\u003e\n\n\u003ch3\u003eHow simple is installation for this LED tail light?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic bolt and connector removal; many owners can swap the unit in minutes. The assembly arrives with bulbs pre-installed so you don’t need to source lamps separately. Lathsy recommends watching a vehicle‑specific installation video or using professional installation if you prefer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play harness compatibility with factory connectors\u003c\/li\u003e\n  \u003cli\u003eComes with bulbs installed—no separate bulb purchase required\u003c\/li\u003e\n  \u003cli\u003eNo printed instruction manual included; online video or mechanic advised\u003c\/li\u003e\n  \u003cli\u003eTypical swap time: 15–30 minutes for experienced users\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with my Ram 1500’s blind-spot system?\u003c\/h3\u003e\n\u003cp\u003eThe Lathsy tail light is blind‑spot compatible, meaning its wiring and connector match Ram 1500 systems that use blind‑spot monitoring. However, the assembly does not include the blind‑spot module itself, so your truck must already have the module or you’ll need to retain the original module during installation. If your vehicle is a Ram 1500 Classic, this part is not compatible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with blind‑spot systems wiring-wise, module not included\u003c\/li\u003e\n  \u003cli\u003eReplaces OE number 68263397AE for correct fit\u003c\/li\u003e\n  \u003cli\u003eNot for use on Ram 1500 Classic models—fits 2019–2024 standard Ram 1500\u003c\/li\u003e\n  \u003cli\u003eVerify existing blind‑spot module remains in vehicle before swapping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the assembly hold up to weather and road conditions?\u003c\/h3\u003e\n\u003cp\u003eLathsy engineered this tail light with enhanced sealing to limit moisture and fogging under wet or extreme conditions. The housing uses resilient materials and gaskets at mating surfaces to protect internal electronics and bulbs. If shipping damage occurs or the unit fails to function on arrival, Lathsy offers replacement support.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved sealing reduces water ingress and interior fogging\u003c\/li\u003e\n  \u003cli\u003eDurable housing materials for road‑use longevity\u003c\/li\u003e\n  \u003cli\u003eQuality check against shipping damage—replacement provided if needed\u003c\/li\u003e\n  \u003cli\u003eFactory-style mounting points for secure attachment\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about fit, parts, and what's included?\u003c\/h3\u003e\n\u003cp\u003eThe Lathsy passenger-side LED tail light is built to OE dimensions and electrical specifications for a direct replacement. It arrives with bulbs installed but does not ship with an installation guide or blind‑spot module. Confirm your truck’s model year and blind‑spot equipment before ordering to ensure correct fit and function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: LED tail light assembly with bulbs pre-installed\u003c\/li\u003e\n  \u003cli\u003eOE replacement for part number 68263397AE\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Ram 1500 Classic; fits 2019–2024 Ram 1500\u003c\/li\u003e\n  \u003cli\u003eNo printed instructions or blind‑spot module included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own a 2019–2024 Dodge Ram 1500 (non‑Classic) and want a reliable, OE‑fit passenger‑side LED tail light with a black cover and blind‑spot wiring compatibility. It suits DIYers comfortable with plug‑and‑play swaps and professionals replacing damaged or aging factory assemblies—especially when improved sealing and a modern LED appearance are priorities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this tail light compatible with Ram 1500 Classic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Lathsy assembly fits 2019–2024 Ram 1500 models but is not compatible with Ram 1500 Classic.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the unit include the blind-spot module and bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Bulbs come installed, but the blind‑spot module is not included; the part is wiring‑compatible with existing modules.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lathsy","offers":[{"title":"Default Title","offer_id":67584941686969,"sku":"B0DB5QC6T5","price":288.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lathsy-tail-light-passenger-side-front-view.jpg?v=1790460141"},{"product_id":"lathsy-led-tail-light-for-2019-2024-dodge-ram-1500-passenger-side-red-lens-blind-spot-compatible","title":"Lathsy LED Tail Light for 2019–2024 Dodge Ram 1500 Passenger Side — Red Lens, Blind-Spot Compatible","description":"\u003cp\u003e\u003cstrong\u003eHigh-quality Lathsy LED tail light designed to replace the passenger-side taillight on 2019–2024 Dodge Ram 1500 trucks, featuring a red cover and blind-spot compatible wiring.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis direct-fit replacement from Lathsy provides a modern LED braking and signaling appearance while matching OE mounting points for 2019–2024 Ram 1500 models (not compatible with Ram 1500 Classic). The unit arrives with bulbs installed, durable weather sealing, and connections for vehicles equipped with blind-spot detection circuits. It replaces OE part 68262530AH and is offered as a passenger-side assembly intended for quick swap-in installation by a knowledgeable DIYer or a professional technician.\u003c\/p\u003e\n\n\u003ch3\u003eWill this Lathsy taillight fit my 2019–2024 Ram 1500?\u003c\/h3\u003e\n\n\u003cp\u003eYes, this passenger-side assembly is made for 2019–2024 Dodge Ram 1500 models but does not fit Ram 1500 Classic. It follows the OEM mounting pattern for straightforward alignment and secure attachment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for OE number 68262530AH\u003c\/li\u003e\n  \u003cli\u003eMade specifically for 2019–2024 Ram 1500 (exclude Classic)\u003c\/li\u003e\n  \u003cli\u003ePassenger-side orientation only\u003c\/li\u003e\n  \u003cli\u003eConnects to factory wiring harness, including blind-spot circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included?\u003c\/h3\u003e\n\n\u003cp\u003eThe Lathsy assembly arrives with bulbs installed to reduce initial steps during replacement, so basic removal of the old unit and plugging in the harness is typically all that’s required. No printed instructions are included, so we recommend referencing an installation video or using a professional installer if you’re unfamiliar with vehicle electrical work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with bulbs preinstalled\u003c\/li\u003e\n  \u003cli\u003eNo printed manual—video guidance recommended\u003c\/li\u003e\n  \u003cli\u003eReplacement usually takes minutes with basic tools\u003c\/li\u003e\n  \u003cli\u003eProfessional installation reduces wiring or fitment issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this tail light handle weather and road conditions?\u003c\/h3\u003e\n\n\u003cp\u003eLathsy designed the housing with reinforced sealing to keep moisture and road grime out of the lens chamber, minimizing fogging and corrosion over time. The LED design also offers consistent illumination and a longer service life compared with many halogen assemblies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved sealing to resist water and fogging\u003c\/li\u003e\n  \u003cli\u003eDurable red lens resistant to UV and road wear\u003c\/li\u003e\n  \u003cli\u003eLED lighting for reliable brightness and longevity\u003c\/li\u003e\n  \u003cli\u003eQuality checks cover shipping damage—replacement available\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this unit support blind-spot detection and vehicle electronics?\u003c\/h3\u003e\n\n\u003cp\u003eThe assembly is blind-spot detection compatible and designed to interface with Ram 1500 wiring that includes that feature, but it does not contain the blind-spot module itself. If your truck has an active blind-spot system, you should reconnect to the factory module and verify functionality after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWiring supports blind-spot detection connections\u003c\/li\u003e\n  \u003cli\u003eBlind-spot module not included with the light\u003c\/li\u003e\n  \u003cli\u003eTest vehicle systems after installation for proper alerts\u003c\/li\u003e\n  \u003cli\u003eContact a pro if integration or diagnostics are needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Choose the Lathsy passenger-side LED tail light if you own a 2019–2024 Dodge Ram 1500 (non-Classic) and want an OE-style, plug-and-play replacement with modern LED performance and added weather protection. It’s ideal for owners replacing a cracked, faded, or nonfunctional taillight who prefer a direct-fit unit shipped ready with bulbs. If you’re unsure about wiring or blind-spot module connections, plan for professional installation to ensure the vehicle’s safety systems remain fully operational.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this taillight compatible with Ram 1500 Classic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Lathsy passenger-side LED tail light fits 2019–2024 Ram 1500 models but is not compatible with Ram 1500 Classic.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bulbs and the blind-spot module included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Bulbs come preinstalled, but the blind-spot module is not included; the light supports connections to an existing vehicle module.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lathsy","offers":[{"title":"Default Title","offer_id":67584941752505,"sku":"B0DB5Q7Z2N","price":288.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lathsy-led-tail-light-packaging-front.jpg?v=1790460141"},{"product_id":"sanooer-tow-mirrors-for-dodge-ram-2009-2018-chrome-back-power-adjustable-heated-glass","title":"Sanooer Tow Mirrors for Dodge Ram 2009–2018 Chrome Back — Power-Adjustable Heated Glass","description":"\u003cp\u003e\u003cstrong\u003eSanooer Chrome Tow Mirrors are a direct-fit replacement set for Dodge Ram trucks (2009–2018 1500, 2010–2018 2500\/3500 and 2019–2024 1500 Classic) that restore towing visibility with power-adjustable heated glass, puddle lamps, turn signals, temperature sensing and manual fold\/flip functions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ram needs upgraded exterior mirrors for towing or to replace damaged originals, these Sanooer mirrors match OEM mounting points and appearance while adding durable aluminum bases and chrome housings. They are engineered to fit the listed model years and to support only the electrical features your truck originally had—so existing power, heating, puddle lamp or signal circuits will continue to operate without extra wiring modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these mirrors improve towing visibility?\u003c\/h3\u003e\n\u003cp\u003eThe extended glass and stable mounting reduce blind spots when hauling trailers or wide loads. Heated glass prevents fog and ice buildup so you retain clear sight lines in cold or wet conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLarge adjustable power glass offers a wider field of view than standard mirrors\u003c\/li\u003e\n  \u003cli\u003eHeated elements clear condensation and light frost faster\u003c\/li\u003e\n  \u003cli\u003eManual flip-up and folding let you protect mirrors in tight spaces\u003c\/li\u003e\n  \u003cli\u003eRobust aluminum base resists flex and reduces vibration at highway speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these mirrors work with my truck’s existing electronics?\u003c\/h3\u003e\n\u003cp\u003eYes—Sanooer designed these towing mirrors to plug into the factory connections and preserve only the factory-equipped features. If the original truck had power adjust, heated glass, puddle lamps or turn signals, those functions will operate after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports power glass, heated glass, puddle lamps and turn signals when present\u003c\/li\u003e\n  \u003cli\u003eIncludes temperature sensor where factory-equipped for consistent operation\u003c\/li\u003e\n  \u003cli\u003eNo extra harness typically required when matching factory feature sets\u003c\/li\u003e\n  \u003cli\u003eNon-factory features will not function unless your vehicle had them originally\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and stable are the Sanooer tow mirrors on the road?\u003c\/h3\u003e\n\u003cp\u003eBuilt with strengthened aluminum bases and precision mounting, these mirrors resist shake and vibration for clear, steady viewing at highway speeds. Chrome housings provide corrosion resistance and a factory-style finish that holds up to daily use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUltra-strong aluminum base minimizes flex and vibration\u003c\/li\u003e\n  \u003cli\u003eChrome exterior offers long-lasting corrosion resistance and style\u003c\/li\u003e\n  \u003cli\u003eQuality control testing reduces risk of rattles and looseness over time\u003c\/li\u003e\n  \u003cli\u003eManual flip and fold features protect mirrors from impacts when parked\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and are they easy to install?\u003c\/h3\u003e\n\u003cp\u003eThe package contains a left and right mirror assembly ready to bolt into the truck’s original mirror mounts. Installation is straightforward for anyone comfortable removing trim and swapping exterior mirrors, and the mirrors utilize factory wiring where applicable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes both driver and passenger towing mirror assemblies\u003c\/li\u003e\n  \u003cli\u003eMounting hardware aligns with OEM bolt pattern for direct fit\u003c\/li\u003e\n  \u003cli\u003eUses your truck’s existing electrical connectors when features match\u003c\/li\u003e\n  \u003cli\u003eClear compatibility note: functions present depend on your truck’s original equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These Sanooer towing mirrors are aimed at Dodge Ram owners who need a reliable, direct-fit mirror replacement with towing capability—particularly drivers of 2009–2018 Ram 1500, 2010–2018 Ram 2500\/3500, and 2019–2024 Ram 1500 Classic. They suit owners replacing damaged mirrors, preparing their truck for regular trailer towing, or upgrading to heated, illuminated, and turn-signal-equipped mirrors while retaining factory wiring and appearance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these mirrors fit my 2014 Dodge Ram 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are designed to fit 2009–2018 Ram 1500 models directly, matching OEM mount points and wiring where features are present.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the mirrors include turn signals and puddle lamps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They support turn signals and puddle lamps only if your truck was originally equipped with those factory features.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sanooer","offers":[{"title":"Default Title","offer_id":67584944111801,"sku":"B0BYHQ4ZZD","price":448.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/sanooer-chrome-front-profile.jpg?v=1790460292"},{"product_id":"dna-motoring-headlight-pair-for-2002-2005-dodge-ram-1500-2003-2005-2500-3500-black-housing-clear-corner-direct-oe-fit","title":"DNA MOTORING Headlight Pair for 2002–2005 Dodge Ram 1500 \/ 2003–2005 2500-3500 — Black Housing Clear Corner, Direct OE Fit","description":"\u003cp\u003e\u003cstrong\u003eThese are a pair of direct-replacement DNA MOTORING headlights engineered to fit 2002–2005 Dodge Ram 1500 and 2003–2005 Ram 2500\/3500 models, featuring black ABS housings and clear corner lenses for an OE-style look.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ram's front end shows foggy, cracked, or outdated lamps, this complete driver and passenger headlight set restores road-facing illumination and curb appeal without cutting or modifying the truck. Constructed with impact-resistant polycarbonate lenses and durable ABS housings, the assembly accepts standard 9007 high\/low beam bulbs and 4157NA turn\/parking bulbs (not included), and installs using the vehicle’s factory mounting points for plug-and-play replacement.\u003c\/p\u003e\n\n\u003ch3\u003eWill this fit my 2004 Dodge Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eYes — this pair is specifically sized for the 2002–2005 Ram 1500 and the 2003–2005 Ram 2500\/3500. It matches OEM mounting locations and aligns with the listed part numbers so you can swap units without altering the frame or brackets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2002–2005 Ram 1500; 2003–2005 Ram 2500\/3500\u003c\/li\u003e\n  \u003cli\u003eOEM part references included for cross-checking\u003c\/li\u003e\n  \u003cli\u003eDirect OE fitment, no drilling or trimming required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these headlights perform and what bulbs do they use?\u003c\/h3\u003e\n\u003cp\u003eThe assemblies accept conventional halogen bulbs, offering standard high\/low beam function and separate turn\/parking lamp sockets. Performance depends on the bulbs you choose; upgrading to higher-output halogen or LED-compatible bulbs (where allowed) can improve nighttime visibility while maintaining the factory beam pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMain beam socket: 9007 (high\/low)\u003c\/li\u003e\n  \u003cli\u003eTurn\/parking socket: 4157NA\u003c\/li\u003e\n  \u003cli\u003eBulbs are not included — choose rated replacements for desired brightness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build quality can I expect?\u003c\/h3\u003e\n\u003cp\u003eThese headlights combine an ABS plastic housing with a polycarbonate lens to resist road debris and UV exposure. The black housing with clear corner lens is molded to maintain fitment integrity and visual consistency with stock exterior trim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable ABS housing for impact resistance\u003c\/li\u003e\n  \u003cli\u003ePolycarbonate lens for scratch and shatter protection\u003c\/li\u003e\n  \u003cli\u003eFactory-style finish for a cohesive appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what is included in the package?\u003c\/h3\u003e\n\u003cp\u003eThe set is designed for plug-and-play replacement using existing factory hardware; however, professional installation is recommended to ensure proper alignment and sealing. The package contains both left (driver) and right (passenger) headlight assemblies only; mounting hardware and bulbs are typically reused from the original units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes complete driver and passenger headlight assemblies\u003c\/li\u003e\n  \u003cli\u003eNo installation instructions included — professional install suggested\u003c\/li\u003e\n  \u003cli\u003eReuses factory bulbs and wiring harnesses for simple swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: These DNA MOTORING headlights suit Dodge Ram owners seeking an affordable, direct-fit replacement to restore appearance and functionality. They work well for trucks with faded or damaged stock lights, restorations aiming for an OEM look, or owners wanting a reliable, easy-to-install upgrade that keeps factory mounting and electrical connections intact.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these headlights come with bulbs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, bulbs are not included. They accept 9007 for high\/low beam and 4157NA for turn\/parking lights.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these require cutting or drilling to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No cutting or drilling is needed; they are direct OE replacements designed for factory mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DNA MOTORING","offers":[{"title":"Default Title","offer_id":67584945389753,"sku":"B07D4YRRB3","price":253.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dna-motoring-front-view-pair-headlights.jpg?v=1790460368"},{"product_id":"wonderdriver-under-seat-storage-box-for-dodge-ram-1500-crew-cab-2019-2026-waterproof-low-profile-with-removable-tray","title":"wonderdriver Under-Seat Storage Box for Dodge Ram 1500 Crew Cab 2019-2026 — Waterproof Low-Profile with Removable Tray","description":"\u003cp\u003e\u003cstrong\u003ewonderdriver Under Seat Storage Box is a custom-fit, waterproof under-seat organizer designed to add secure, easy-access storage to 2019–2026 Dodge Ram 1500 Crew Cab (new body style).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis under-seat storage solution is engineered specifically for the modern Ram 1500 Crew Cab with the new body style, offering a low-profile, durable place to stash tools, gear, and daily essentials without drilling or permanent modification. Built from rugged, easy-to-clean plastic and featuring a removable smaller compartment, it keeps items tidy and protected while riding or parked.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this under-seat box fit my 2019–2026 Dodge Ram 1500 Crew Cab?\u003c\/h3\u003e\n\u003cp\u003eThe wonderdriver box is molded to match the floor geometry of the new-body-style Ram 1500 Crew Cab models from 2019 through 2026. It sits under the rear seats without requiring drilling or special tools, aligning with factory mounting points and contours for a secure, low-profile installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecise compatibility for 2019–2026 Ram 1500 Crew Cab (new body style only).\u003c\/li\u003e\n  \u003cli\u003eNo drilling—installs using existing under-seat space and hardware.\u003c\/li\u003e\n  \u003cli\u003eDesigned to clear seat movement and factory tie-downs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe organizer is manufactured from heavy-duty plastic selected for toughness and water resistance, making it suitable for everyday use and easy maintenance. Its smooth surfaces rinse clean, and the construction resists dents and abrasion from typical cargo.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-grade, waterproof plastic construction.\u003c\/li\u003e\n  \u003cli\u003eImpact-resistant walls and reinforced edges for longevity.\u003c\/li\u003e\n  \u003cli\u003eSimple wipe or rinse cleaning—no special products required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the storage layout help me organize gear for work, camping, or hunting?\u003c\/h3\u003e\n\u003cp\u003eInside the main compartment sits a removable compact insert that creates a two-tier system: a larger area for bulkier items and a smaller tray for loose essentials. This arrangement improves access and stops small items from sliding around under the seat during transit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemovable small compartment for batteries, tools, or personal items.\u003c\/li\u003e\n  \u003cli\u003eMain cavity suited for larger gear—straps, cords, small toolboxes.\u003c\/li\u003e\n  \u003cli\u003eLow profile keeps storage hidden but reachable from the rear seating area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and intended to be completed in minutes with the supplied instructions; no cutting or permanent modification is necessary. For upkeep, the smooth plastic interior and exterior surfaces can be wiped or rinsed free of dirt, mud, or spills.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free or minimal-tool setup—clear step-by-step guidance included.\u003c\/li\u003e\n  \u003cli\u003eSnap-in or slide placement secures the box under the seat without fasteners.\u003c\/li\u003e\n  \u003cli\u003eEasy-clean design reduces time spent on vehicle maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The wonderdriver Under Seat Storage Box is ideal for Ram 1500 Crew Cab owners who need more organized, concealed storage without altering their truck—tradespeople, outdoor enthusiasts, parents, or anyone who carries gear regularly. Confirm your Ram’s body style and cab configuration (new body style Crew Cab only) before purchase to ensure a proper fit. The unit ships with a 12-month warranty and customer support if questions arise.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit a Ram 1500 Classic or only the new body style?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 2019–2026 Ram 1500 Crew Cab with the new body style only; it is not compatible with Classic body style models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to drill holes to install the under-seat box?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No drilling is required; the unit installs in minutes using the vehicle's under-seat space and included instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"wonderdriver","offers":[{"title":"Default Title","offer_id":67584946077881,"sku":"B0GKZCM5Z8","price":281.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wonderdriver-under-seat-storage-front-view.jpg?v=1790460435"},{"product_id":"docs-diesel-filter-maintenance-kit-for-6-7l-cummins-ram-2500-5500-2019-2024-5-piece-matched-set-tested-performance","title":"Doc's Diesel Filter Maintenance Kit for 6.7L Cummins RAM 2500–5500 (2019–2024), 5-piece matched set, tested performance","description":"\u003cp\u003e\u003cstrong\u003eDoc's Diesel Filter Maintenance Kit gives you every filter needed for routine service on 6.7L Cummins RAM 2500–5500 (2019–2024) in one convenient, verified package.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep your Cummins-equipped RAM running reliably between services with a matched set of fuel\/water separators, engine air, oil, and cabin filters designed specifically for 2019–2024 6.7L applications. This kit is built to the vehicle fitment and independently tested for filtration performance so you can replace service parts faster and with confidence.\u003c\/p\u003e\n\n\u003ch3\u003eWhat components are included in this maintenance kit and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles five replacement parts tailored to the 6.7L Cummins family: two fuel\/water separators, one engine air filter, one oil filter, and one cabin air filter. Each piece is selected to meet the same application so a single purchase covers scheduled maintenance needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDGF430 and DGF401 fuel\/water separators – protect injectors by removing water and large particulates.\u003c\/li\u003e\n  \u003cli\u003eDPA6314 engine air filter – reduces engine wear by trapping dirt and debris before they reach intake.\u003c\/li\u003e\n  \u003cli\u003eD5335 oil filter – supports clean oil circulation to prolong engine life between changes.\u003c\/li\u003e\n  \u003cli\u003eD3705 cabin air filter – improves interior air quality for driver comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow well do these filters perform compared with factory or aftermarket parts?\u003c\/h3\u003e\n\u003cp\u003ePerformance is backed by independent testing rather than unverified claims. The kit’s filtration elements showed high efficiency and significant dust-holding capacity in third-party evaluations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall tested efficiency: 99.25 percent, demonstrating strong contaminant capture.\u003c\/li\u003e\n  \u003cli\u003eFine particle performance: 99.1 percent efficiency down to 3 microns for critical protection.\u003c\/li\u003e\n  \u003cli\u003eDust holding: verified 344.2 g capacity, indicating longer effective life before clogging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I change each filter in the kit for typical driving?\u003c\/h3\u003e\n\u003cp\u003eFollow your vehicle manufacturer’s recommendations as the primary guide; these intervals give practical ranges for routine use and heavier duty cycles. Adjust frequency based on towing, dusty conditions, or severe service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel\/water separators: usually every 5,000–10,000 miles; up to 15,000 miles maximum depending on conditions.\u003c\/li\u003e\n  \u003cli\u003eOil filter: commonly changed every 5,000–7,000 miles for conventional intervals, or up to 10,000–15,000 miles in extended-service scenarios.\u003c\/li\u003e\n  \u003cli\u003eEngine air and cabin filters: inspect at every oil service and replace as needed, commonly every 15,000–30,000 miles depending on environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these filters fit my RAM exactly and how do I confirm compatibility?\u003c\/h3\u003e\n\u003cp\u003eThe kit is manufactured for Ram 6.7L Cummins 2500, 3500, 4500 and 5500 model years 2019–2024, but fitment can vary by axle, cab, and engine options. Use the fitment card or vehicle selector on the product page before ordering to verify exact year and configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for 6.7L Cummins engines in RAM trucks 2019–2024.\u003c\/li\u003e\n  \u003cli\u003eIncludes part numbers for easy cross-reference with OEM service guides.\u003c\/li\u003e\n  \u003cli\u003eCheck your truck’s VIN or the on-page fitment tool to confirm compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This maintenance kit is aimed at RAM owners, fleet managers, and independent technicians who want a single, tested parts package for routine service on 6.7L Cummins trucks (2500–5500) from 2019 through 2024. It’s handy for DIY maintenance, scheduled shop service, or fleet upkeep when you need confidence in fit and verified filtration performance without sourcing individual filters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these filters fit my 2019 RAM 2500 with the 6.7L Cummins?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit is made for 6.7L Cummins RAM 2500–5500 (2019–2024). Confirm with the on-page fitment card or your VIN.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the filtration claims independently tested?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Third-party tests show 99.25% efficiency and 344.2 g dust-holding capacity, with 99.1% efficiency to 3 microns.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Doc's Diesel","offers":[{"title":"Default Title","offer_id":67584946897081,"sku":"B09CLMGSG7","price":346.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/docs-diesel-kit-front-packaging_d43b4c46-2c53-47c1-b409-7eb3e572315c.jpg?v=1790460486"},{"product_id":"kinggeri-under-seat-storage-boxes-dodge-ram-1500-crew-cab-2019-2026-direct-fit-abs-no-drill","title":"KINGGERI Under Seat Storage Boxes — Dodge Ram 1500 Crew Cab (2019–2026), Direct-Fit ABS No-Drill","description":"\u003cp\u003e\u003cstrong\u003eKINGGERI Under Seat Storage Boxes are molded ABS replacement storage compartments designed to fit under the rear seats of 2019–2026 Dodge Ram 1500 Crew Cab vehicles, adding discreet, durable storage without drilling or permanent modification.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese under-seat storage boxes convert unused space beneath the rear seats into organized, concealed compartments sized for tools, emergency gear, clothing, and other items you want out of sight. Built from impact-resistant ABS plastic, the units match the cabin’s contours to integrate cleanly with the new body-style Ram 1500 Crew Cab. They are offered as direct-fit replacements specifically for model years 2019 through 2026 (new body style) and are not intended for classic-style Ram trucks.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these boxes attach and fit in my Ram 1500 Crew Cab?\u003c\/h3\u003e\n\u003cp\u003eThe storage boxes are engineered as vehicle-specific replacements that slot into the factory under-seat area, following the contour and mounting points of the 2019–2026 Crew Cab floor. Installation is generally straightforward and requires no permanent modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design tailored to the new-body Ram 1500 Crew Cab rear seat cavity.\u003c\/li\u003e\n  \u003cli\u003eNo drilling or cutting—uses existing under-seat space and mounting geometry.\u003c\/li\u003e\n  \u003cli\u003eConfirm compatibility with your model year before purchase to ensure fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction protect my stored items?\u003c\/h3\u003e\n\u003cp\u003eKINGGERI storage boxes are molded from high-grade ABS plastic that balances rigidity and impact resistance. The material resists moisture and wear, providing a durable enclosure for tools, cables, and other equipment you keep in your truck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength ABS plastic construction for long-term durability.\u003c\/li\u003e\n  \u003cli\u003eSmooth interior surfaces that resist corrosion and are easy to clean.\u003c\/li\u003e\n  \u003cli\u003eSturdy walls and edges to shield contents from crushing and road vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the internal layout help keep things organized?\u003c\/h3\u003e\n\u003cp\u003eThe interior uses partitioned compartments and a removable baffle so you can separate small items or expand the space for larger gear. This modular approach prevents items from piling up and makes retrieval quicker and less distracting when you’re on the road.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-formed partitions divide the storage for neat, accessible placement.\u003c\/li\u003e\n  \u003cli\u003eRemovable baffle lets you reconfigure the interior for bulky or irregular items.\u003c\/li\u003e\n  \u003cli\u003eKeeps jumper cables, tools, and emergency kits from shifting while driving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat after-sale support and warranty does KINGGERI provide?\u003c\/h3\u003e\n\u003cp\u003eKINGGERI backs these under-seat storage boxes with a 12-month warranty and customer support to address fitment questions or product concerns. The warranty covers manufacturing defects and helps ensure you receive a quality replacement accessory for your Dodge Ram.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty covering manufacturing issues.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for pre-purchase compatibility checks and installation help.\u003c\/li\u003e\n  \u003cli\u003eReplacement guidance if the unit arrives damaged or does not fit your stated model year.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: KINGGERI Under Seat Storage Boxes are ideal for Dodge Ram 1500 Crew Cab owners (2019–2026, new body style) who want to add secure, out-of-sight storage without altering the truck’s structure. They suit tradespeople, weekend adventurers, and daily drivers who need organized space for tools, emergency supplies, hunting or fishing gear, clothing, and other items. If you drive a classic-body Ram or a different cab configuration, verify fitment before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my Ram 1500 Classic or other cab types?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These boxes are made to fit 2019–2026 Ram 1500 Crew Cab new body style only; they do not fit classic models or other cab configurations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I remove partitions to store larger items?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The baffle is removable so you can reconfigure the interior for bulky or irregular-shaped gear.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KINGGERI","offers":[{"title":"Default Title","offer_id":67584957317305,"sku":"B0GL7M7GGP","price":277.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kinggeri-front-view-under-seat-box.jpg?v=1790460969"},{"product_id":"ksp-performance-ram-1500-adjustable-upper-control-arms-0-2-lift-1-25-dom-tubing-powder-coated","title":"KSP PERFORMANCE Ram 1500 Adjustable Upper Control Arms 0–2\" Lift, 1.25\" DOM Tubing \u0026 Powder-Coated","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE 0–2\" adjustable upper control arms are heavy-duty, direct-fit replacements for Ram 1500 front upper control arms that restore alignment and support mild lifts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese upper control arms (UCAs) are engineered as an OE-style upgrade to replace factory part numbers 55398403AA, 68163961AD, 68227901AB, 522-467, RK643074 (driver side) and corresponding passenger variants. Built from 1.25\" DOM tubing with MIG-welded joints and a professional powder-coat finish, they are designed to withstand tougher loads than stamped or molded factory arms while maintaining factory-like ride feel. They fit 2009–2010 Dodge Ram 1500 and 2011–2024 Ram 1500 (including 2019–2024 Ram 1500 Classic) in both 2WD and 4WD configurations and accept 0–2\" of suspension lift.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these UCAs improve handling and alignment on a lifted Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eBy replacing worn or weak stock arms with a stronger tubular design, the KSP UCAs reduce flex under load and keep the wheel geometry more consistent. That results in improved steering response and better tire contact during cornering and braking without significantly changing ride comfort.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25\" DOM tubing provides greater stiffness and durability than stamped steel.\u003c\/li\u003e\n  \u003cli\u003eMIG-welded seams create a reinforced structure that resists stress fractures.\u003c\/li\u003e\n  \u003cli\u003eAccepts 0–2\" lift while maintaining proper camber and caster range for alignment.\u003c\/li\u003e\n  \u003cli\u003eDurable polyurethane bushings preserve OEM-like steering feel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these arms fit my specific Ram model and replace factory part numbers?\u003c\/h3\u003e\n\u003cp\u003eYes—these UCAs are made to be direct-fit replacements for listed OEM references and compatible Ram years. Install is straightforward for most technicians and they bolt in where the factory arms were removed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront driver side replaces 55398403AA, 68163961AD, 68227901AB, 522-467, RK643074.\u003c\/li\u003e\n  \u003cli\u003eFront passenger side replaces 55398404AA, 68163960AD, 68227900AB, 522-468, RK643073.\u003c\/li\u003e\n  \u003cli\u003eFits 2009–2010 Dodge Ram 1500 and 2011–2024 Ram 1500 (incl. 2019–2024 Classic), 2WD \u0026amp; 4WD.\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct replacement—no major frame modification required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes are used, and how do they affect longevity?\u003c\/h3\u003e\n\u003cp\u003eKSP PERFORMANCE builds these arms from robust materials and applies corrosion protection to extend service life. The combination of tubular construction, MIG welding, polyurethane bushings, and powder coating resists wear, rust, and typical road stresses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25\" DOM steel tubing for higher tensile strength and smooth finish for optional paint.\u003c\/li\u003e\n  \u003cli\u003eMIG welding for consistent, reinforced joints under dynamic loads.\u003c\/li\u003e\n  \u003cli\u003eProfessional powder coat to prevent corrosion and the need for frequent touch-ups.\u003c\/li\u003e\n  \u003cli\u003eDurable polyurethane bushings maintain performance and reduce premature tire wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these UCAs adjustable, and what does that mean for my alignment?\u003c\/h3\u003e\n\u003cp\u003eThe arms are built to allow small adjustments to correct camber and caster changes caused by lifts up to 2\". That adjustability helps align the front end within proper factory tolerances after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable link ends accommodate slight suspension geometry changes from lifts.\u003c\/li\u003e\n  \u003cli\u003eHelps bring camber and caster back to specification for stable steering.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common alignment procedures at any professional shop.\u003c\/li\u003e\n  \u003cli\u003eNew ball joints come pre-greased—no extra grease required within first year.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These KSP PERFORMANCE 0–2\" upper control arms are built for Ram 1500 owners and technicians who need a reliable, stronger-than-stock replacement that supports mild lifts while preserving predictable handling. Ideal for drivers upgrading worn factory arms, installing a small suspension lift, or anyone seeking a durable OE-style upgrade with corrosion protection and straightforward fitment.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eBrand promise: KSP PERFORMANCE provides a 30-day refund and 1-year free replacement parts policy. Contact KSP for any installation or product questions.\u003c\/em\u003e\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these control arms fit a 2015 Ram 1500 4WD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these KSP UCAs fit 2011–2024 Ram 1500 models, including 2015 4WD, as direct replacements for listed OEM part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use them with a 2\" suspension lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these arms are rated for 0–2\" of lift and include adjustability to help restore alignment within factory ranges.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584960266425,"sku":"B0D3PMRSYL","price":440.61,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-front-packaging-uca-ram1500.jpg?v=1790461090"},{"product_id":"ksp-performance-upper-control-arms-for-ram-1500-2-4-lift-tubular-arms-package-of-2-with-pu-bushings-2009-2022","title":"KSP PERFORMANCE Upper Control Arms for Ram 1500 — 2–4\" Lift Tubular Arms (Package of 2) with PU Bushings, 2009–2022","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE Upper Control Arms are a heavy‑duty tubular suspension upgrade designed to restore proper alignment and ball joint geometry on lifted Ram 1500 trucks with 2–4\" of lift.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Version 2.0 upper control arms replace the factory arms on Ram 1500 2WD and 4WD models from 2009 through 2022, improving suspension strength and steering stability after a lift. Built from 1.25\" DOM tubing with reinforced welds and upgraded bushings, they aim to provide a robust, longer‑lasting alternative to OE components while accommodating lifted ride heights.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these control arms affect steering and alignment after lifting a Ram 1500?\u003c\/h3\u003e\n\u003cp\u003eInstalling properly sized upper control arms repositions the ball joint and spindle, reducing excessive caster and camber changes caused by a lift. That helps maintain predictable steering feel and makes alignment easier to dial in at the shop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores correct ball joint geometry for 2–4\" lifts\u003c\/li\u003e\n  \u003cli\u003eReduces premature tire wear from misalignment\u003c\/li\u003e\n  \u003cli\u003eImproves straight‑line stability and steering returnability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features make these arms durable?\u003c\/h3\u003e\n\u003cp\u003eThese arms use 1.25\" DOM (drawn‑over‑mandrel) tubing for consistent wall thickness and strength, plus reinforced MIG welds for structural integrity. Version 2.0 adds polyurethane bushings and a longer‑life dust cover to resist wear under road and off‑road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.25\" DOM tube delivers superior strength versus stamped steel\u003c\/li\u003e\n  \u003cli\u003eMIG welded joints for reinforced load paths\u003c\/li\u003e\n  \u003cli\u003ePU bushings and extended dust covers for improved longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and maintenance steps should I expect?\u003c\/h3\u003e\n\u003cp\u003eThese control arms are a direct replacement for many factory applications and come as a pair. Basic suspension tools and a professional alignment are recommended after installation; the ball joints are pre‑greased and usually need no added grease for the first year.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes as a package of two upper control arms ready to install\u003c\/li\u003e\n  \u003cli\u003eTighten zerk fittings gently after greasing; avoid over‑torquing\u003c\/li\u003e\n  \u003cli\u003ePerform a full wheel alignment after installation for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and after‑sales support does KSP PERFORMANCE provide?\u003c\/h3\u003e\n\u003cp\u003eKSP PERFORMANCE backs these arms with a 12‑month ball joint replacement policy and a 30‑day refund policy. If issues arise after 30 days, the brand offers replacement parts to resolve problems without extra charge.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12‑month free replacement on ball joints\u003c\/li\u003e\n  \u003cli\u003e30‑day refund window, then free replacement parts if needed\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment or installation questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These KSP PERFORMANCE Version 2.0 upper control arms are aimed at Ram 1500 owners (2009–2022) who have added a 2–4\" lift or are upgrading worn suspension components and want a stronger, more durable tubular arm. They suit drivers who need improved steering geometry and tougher build quality for street and light off‑road use, and who will have the vehicle professionally aligned after installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my Ram 1500 with a 3\" lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These arms are designed to work with 2–4\" lifts on Ram 1500 models from 2009–2022.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the ball joints need grease before installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: New ball joints are pre-greased and typically do not require extra grease within the first year.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584960495801,"sku":"B08P4C3YYH","price":555.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-front-packaging-ram1500-upper-control-arms.jpg?v=1790461111"},{"product_id":"yeherit-coolant-reservoir-tank-for-ram-2500-3500-4500-5500-2013-2018-6-7l-direct-fit-with-sensor-cap","title":"YEHERIT Coolant Reservoir Tank for Ram 2500\/3500\/4500\/5500 2013-2018 — 6.7L Direct-Fit with Sensor \u0026 Cap","description":"\u003cstrong\u003eYEHERIT coolant reservoir tank with integrated sensor and cap replaces factory overflow bottle for 2013–2018 Ram 2500\/3500\/4500\/5500 with the 6.7L engine.\u003c\/strong\u003e\n\n\u003cp\u003eThis replacement coolant overflow tank is designed to match OE fitment and restore correct coolant level monitoring and overflow control for Cummins 6.7L-equipped Ram trucks. Molded from heat- and pressure-resistant plastic and supplied with the sensor port and matching cap, the assembly is a direct-fit option for owners replacing worn, cracked, or leaking expansion tanks. Confirm your vehicle’s year and part number before ordering to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this tank restore my truck's cooling system?\u003c\/h3\u003e\n\u003cp\u003eReplacing a damaged reservoir ensures proper coolant expansion control and accurate level sensing, preventing air from entering the cooling loop and helping the cooling system function as intended. The included sensor port allows the truck’s ECU and dash gauge to monitor fluid level and trigger alerts if topping up is needed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRestores coolant overflow capacity and venting.\u003c\/li\u003e\n\u003cli\u003eRe-establishes level sensing via the sensor opening.\u003c\/li\u003e\n\u003cli\u003ePrevents coolant loss from cracks or degraded plastic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Ram 2500\/3500\/4500\/5500 with a 6.7L engine?\u003c\/h3\u003e\n\u003cp\u003eThis YEHERIT tank is made for 2013–2018 Ram trucks equipped with the L6 6.7L engine and replaces several OEM part numbers. Always cross-check your current tank’s part number or vehicle compatibility before purchase to guarantee a correct match.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible model years: 2013–2018 Rams.\u003c\/li\u003e\n\u003cli\u003eDirect replacement for numbers including 68166475AC, 68096261AA, 68166475AB.\u003c\/li\u003e\n\u003cli\u003eFits 2500, 3500, 4500 and 5500 chassis with 6.7L engine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and durability features?\u003c\/h3\u003e\n\u003cp\u003eConstructed from durable, heat- and pressure-resistant plastic, the tank is engineered to withstand under-hood temperatures and typical cooling system pressures. Reinforced mounting points and a secure cap seating help reduce the likelihood of leaks and premature failure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-quality plastic resists heat and engine bay stress.\u003c\/li\u003e\n\u003cli\u003eReinforced fittings and sensor opening for reliable installation.\u003c\/li\u003e\n\u003cli\u003eDesigned for long-term resistance to cracking and deformation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT reservoir is designed as a bolt-in replacement requiring no cutting or modification; typical DIY tools and basic mechanical skills are sufficient. Follow vehicle service guidance for coolant draining and refilling, bleed any trapped air, and verify the sensor connection and cap seal after installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect-fit design requires no modifications.\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on swap if matching OEM mounting points.\u003c\/li\u003e\n\u003cli\u003eRemember to refill coolant and properly bleed the system after replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This coolant reservoir is ideal for Ram owners and mechanics needing a dependable OE-style replacement for worn, cracked, or leaking overflow tanks on 2013–2018 6.7L trucks. It suits fleet maintainers, DIY enthusiasts, and repair shops looking for a cost-effective, direct-fit part that includes the sensor-capable opening and a matching cap for a complete, ready-to-install solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tank include the electrical sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tank has the sensor port to accept the level sensor, but the sensor itself may need to be transferred from your original tank or purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a direct bolt-on replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the YEHERIT reservoir is a direct-fit replacement for compatible 2013–2018 Ram 6.7L models and requires no modifications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67584962658489,"sku":"B0F1CCDVTM","price":206.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-view-coolant-reservoir.jpg?v=1790461190"},{"product_id":"tresound-led-tail-light-assembly-for-ram-1500-2500-3500-2009-2019-oem-fit-with-integrated-3rd-brake-light-plug-and-play","title":"Tresound LED Tail Light Assembly for Ram 1500\/2500\/3500 2009-2019 — OEM-fit with Integrated 3rd Brake Light, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eTresound's LED tail light assembly with integrated third brake light is a plug-and-play replacement for many Ram 1500\/2500\/3500 models from 2009 through 2019, offering brighter, longer-lasting illumination and an OEM-style fit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSwap worn or dim factory lamps for a complete LED rear lighting set engineered to match Ram body lines and mounting points. These assemblies combine tail, brake, and signal functions in one unit plus a dedicated third brake light to make your truck more noticeable at night and in poor weather. Designed for hassle-free installation, the kit aims to deliver consistent performance through careful manufacturing checks.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ram model years and trims will these lights fit?\u003c\/h3\u003e\n\u003cp\u003eThese Tresound assemblies are built to fit a range of Ram pickup years, but compatibility depends on whether the truck came with factory LED tail lights. Confirm the style and factory light type before ordering to avoid mismatch.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Dodge Ram 1500 (2009–2010), Ram 1500 (2011–2018), Ram 1500 Classic (2019)\u003c\/li\u003e\n  \u003cli\u003eFits: Dodge Ram 2500 (2010), Ram 2500 (2011–2018)\u003c\/li\u003e\n  \u003cli\u003eFits: Dodge Ram 3500 (2010), Ram 3500 (2011–2018)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 2013–2017 Ram models that have factory LED tail lights\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is the installation process?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be quick and minimally invasive: the units use a plug-and-play approach that aligns with original mounting points and wiring. Typical installs can be completed with basic hand tools, and no cutting or splicing should be necessary when matched to the correct vehicle harness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect connector interfaces the existing Ram wiring harness\u003c\/li\u003e\n  \u003cli\u003eNo special tools or modifications required for compatible models\u003c\/li\u003e\n  \u003cli\u003eMounting points mirror the OEM geometry for a secure fit\u003c\/li\u003e\n  \u003cli\u003eIncludes tail lights plus a matching third brake light for uniform appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and quality features does this LED set deliver?\u003c\/h3\u003e\n\u003cp\u003eThese assemblies use LED technology to provide brighter illumination and quicker response than incandescent bulbs, improving rear visibility to other drivers. Tresound applies multiple quality control checks during production to ensure each unit holds up to daily driving conditions and maintains consistent light output.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLEDs produce clear, high-contrast light for tail, brake, and signal functions\u003c\/li\u003e\n  \u003cli\u003eDurable housings and seals resist moisture and road debris\u003c\/li\u003e\n  \u003cli\u003eManufactured with stepwise inspection for longevity and reliability\u003c\/li\u003e\n  \u003cli\u003eThird brake light included for added conspicuity and coordinated styling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights change my truck’s look or resale value?\u003c\/h3\u003e\n\u003cp\u003eReplacing factory units with matching-style LED assemblies refreshes the rear-end appearance while keeping a factory-like aesthetic. Because the lights are designed to use the original mounting points and connectors, they preserve a near-OEM appearance that can appeal to buyers who prefer upgraded functionality without radical styling changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-matching silhouette maintains factory lines and proportions\u003c\/li\u003e\n  \u003cli\u003eLED upgrade appears modern while remaining subtle and professional\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play design avoids visible wiring modifications\u003c\/li\u003e\n  \u003cli\u003eMay be favorable for resale if clearly documented as an appropriate replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Tresound LED tail light and third brake light kit is aimed at Ram owners from 2009 through 2019 (except 2013–2017 models with factory LEDs) who want a straightforward, long-lasting upgrade to their rear lighting. It's a good choice for drivers seeking improved nighttime visibility, a refreshed rear appearance, and a no-fuss installation that preserves factory fitment. Always verify your truck's original tail light type and year-specific fitment before purchase to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lights fit my Ram if it had factory LED tails?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They do not fit 2013–2017 models equipped with factory LED tail lights. Confirm your truck’s original tail light type before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is wiring or cutting required for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No cutting is required for compatible models. The kit uses plug-and-play connectors designed to mate with the stock harness.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Tresound","offers":[{"title":"Default Title","offer_id":67584965279929,"sku":"B0CCRPDGKM","price":275.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tresound-ram-taillight-front-assembly.jpg?v=1790461266"},{"product_id":"curt-puck-gooseneck-hitch-kit-for-ram-2500-3500-2-5-16-ball-30-000-lb-rated-tool-free-install","title":"CURT puck gooseneck hitch kit for Ram 2500\/3500 — 2-5\/16\" ball, 30,000 lb rated, tool-free install","description":"\u003cp\u003e\u003cstrong\u003eThe CURT 60618 OEM puck gooseneck hitch kit is a complete, drop-in solution that converts Ram 2500\/3500 factory puck bowls into a 30,000 lb rated gooseneck towing setup.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned specifically for Ram trucks equipped with the OEM puck system, this kit gives you a 2-5\/16\" gooseneck ball, heavy-duty safety chain anchors, a rubber hole cover and a protective storage case — everything needed to tow large flatbeds or livestock trailers without permanent bed modifications. The components use CURT’s patented quarter-turn retention and built-in retention balls for a fast, tool-free install that locks solidly into the factory puck receptacles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit attach to my Ram truck?\u003c\/h3\u003e\n\u003cp\u003eThe kit is engineered to drop directly into Ram’s factory puck bowls; no drilling or additional hardware is required. Each component seats into the puck and locks with a quarter-turn latch and integrated retention balls, giving a secure, factory-level fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for Ram puck system — no adapters\u003c\/li\u003e\n  \u003cli\u003eQuarter-turn latch for fast installation and removal\u003c\/li\u003e\n  \u003cli\u003eRetention balls built into the shank to prevent movement\u003c\/li\u003e\n  \u003cli\u003eTool-free operation keeps the bed clean and reversible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat towing capacity and vertical load limits should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis CURT puck gooseneck kit is rated for a gross trailer weight (GTW) up to 30,000 pounds with a vertical load capacity of 7,500 pounds. Those ratings match heavy-duty towing needs, but always verify vehicle manufacturer tongue weight limits and trailer specs before hauling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30,000 lb GTW rating for heavy trailers\u003c\/li\u003e\n  \u003cli\u003e7,500 lb vertical load capacity for high tongue weights\u003c\/li\u003e\n  \u003cli\u003e2-5\/16\" ball size fits most standard gooseneck couplers\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet rugged commercial towing scenarios\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how do they protect the truck bed?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a 2-5\/16\" gooseneck ball, two heavy-duty safety chain anchors, a rubber hole cover, and a molded plastic storage case. The rubber cover seals the puck opening when the ball is removed, keeping out water and debris to reduce corrosion risk.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged gooseneck ball with secure shank and latch system\u003c\/li\u003e\n  \u003cli\u003eCast steel safety chain anchors with large loops for clevis hooks\u003c\/li\u003e\n  \u003cli\u003eRubber friction-fit hole cover to block moisture and grit\u003c\/li\u003e\n  \u003cli\u003eDurable storage case to keep components together and protected\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the kit in everyday use?\u003c\/h3\u003e\n\u003cp\u003eCURT builds these parts from heavy-duty cast steel with a robust powder-coat finish on load-bearing pieces and a rugged rubber cover for the opening. The retention features minimize wear by locking the shank in place rather than relying on loose hardware, and the case prevents surface damage when stored in a toolbox or cab.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCast-steel anchors resist bending under heavy loads\u003c\/li\u003e\n  \u003cli\u003ePowder-coat finish provides corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eRetention balls reduce side-to-side play in the puck\u003c\/li\u003e\n  \u003cli\u003eStorage case protects finish and keeps parts together\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The CURT 60618 OEM puck gooseneck hitch kit is built for Ram 2500 and 3500 owners who already have the factory puck system and need a quick, removable way to equip the truck for heavy-duty gooseneck towing. It’s ideal for contractors, ranchers and fleet users who require high GTW capability without permanent bed alterations, and for anyone who values fast tool-free installation, secure retention and protected storage for hitch components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit work if my Ram truck doesn't have puck system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The CURT 60618 is built specifically for Ram trucks with the OEM puck system and requires those factory puck bowls to install.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the gooseneck ball need tools to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No tools are required; the ball and anchors use a quarter-turn latch and retention balls for fast, tool-free installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CURT","offers":[{"title":"Default Title","offer_id":67584965542073,"sku":"B00QXLI516","price":460.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/curt-60618-kit-in-case-front.jpg?v=1790461268"},{"product_id":"bdeli-dodge-cummins-starter-replacement-for-1994-2002-ram-2500-3500-5-9l-direct-fit-heavy-duty-durability","title":"BDELI Dodge Cummins Starter Replacement for 1994–2002 Ram 2500\/3500 5.9L — Direct-Fit, Heavy-Duty Durability","description":"\u003cp\u003e\u003cstrong\u003eBDELI replacement starter for Dodge\/Cummins 5.9L trucks provides a direct-fit, high-durability solution to restore reliable engine cranking for 1994–2002 Ram 2500 and 3500 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis starter is designed to replace original equipment on 5.9L inline-six Cummins diesel engines built from 1994 onward. Engineered with premium internals and produced in ISO 9001 and IATF 16949 certified facilities, it matches common OE and aftermarket part numbers so installation is straightforward for mechanics and experienced DIYers. Backed by one-year free replacement coverage and professional testing, the unit targets dependable cold starts and long service life under heavy-duty use.\u003c\/p\u003e\n\n\u003ch3\u003eWill this starter fit my 1994–2002 Ram 2500 or 3500 with a 5.9L Cummins?\u003c\/h3\u003e\n\n\u003cp\u003eYes — this BDELI starter is made as a direct-fit replacement for many 5.9L B-series Cummins engines used in Dodge Ram 2500 and 3500 trucks from 1994 through 2002. It cross-references a wide range of OE and aftermarket numbers so you can confirm compatibility before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with common reference numbers such as 3921682, 4746639, 5016522AA, 3604684NW\/RX and 17548N.\u003c\/li\u003e\n  \u003cli\u003eDirect physical fitment designed for 5.9L inline-six Cummins B-series engines.\u003c\/li\u003e\n  \u003cli\u003eMatches electrical and mounting specifications of original starters for those model years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this starter handle heavy-duty use and long-term reliability?\u003c\/h3\u003e\n\n\u003cp\u003eComponents and assembly follow elevated quality standards to improve durability under repeated high-load cycles. Manufacturing occurs in facilities certified to ISO 9001 and IATF 16949, and every unit undergoes professional performance testing to catch defects before shipment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed with premium internal parts to resist wear from frequent cranking.\u003c\/li\u003e\n  \u003cli\u003eQuality-checked with precision equipment for consistent electrical performance.\u003c\/li\u003e\n  \u003cli\u003eIncluded one-year free replacement adds extra assurance after purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and electrical compatibility?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is typically the same as the original starter — bolt-on replacement with the same terminal layout and mounting pattern. Ensure battery and charging system health before installation, and follow torque specs and wiring practices for safe, reliable operation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-on design aligns with factory mounting points for easy swap-out.\u003c\/li\u003e\n  \u003cli\u003eElectrical terminals follow OE positioning to simplify reconnection.\u003c\/li\u003e\n  \u003cli\u003eRecommended pre-install checks: battery condition, ground connections, and starter relay\/fuse integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat part numbers and cross-references does this starter replace?\u003c\/h3\u003e\n\n\u003cp\u003eThis BDELI unit covers many widely used OE and aftermarket references, simplifying parts searches and dealer orders. If your existing starter lists any of the numbers below, this model will likely be the correct replacement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes equivalents such as 1-17548, 17548N, 228000-2292, 228080-2292 and ND2280002292.\u003c\/li\u003e\n  \u003cli\u003eAlso cross-references 3361623, 3604684NW\/RX, 3921682, 4741012 and 5016522AA.\u003c\/li\u003e\n  \u003cli\u003eReview your original starter stamp or parts catalog to confirm a match before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This starter is aimed at owners and technicians who need a cost-effective, OEM-compatible replacement for B-series 5.9L Cummins engines in Dodge Ram 2500\/3500 trucks (1994–2002). It suits fleet managers, restoration projects, and do-it-yourself mechanics who prioritize fitment accuracy, verified testing, and a one-year warranty for peace of mind.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter require any modification to fit my truck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modifications are typically needed; it is made as a direct-fit replacement for compatible 1994–2002 5.9L Cummins engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty and testing back this replacement starter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The starter is production-tested and comes with a one-year free replacement warranty for manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BDELI","offers":[{"title":"Default Title","offer_id":67584966131897,"sku":"B0CP37NP9F","price":305.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bdeli-starter-front-view_6dab1bdb-2cd7-4987-ab34-e2837675e259.jpg?v=1790461305"},{"product_id":"bdeli-starter-for-ram-1500-dodge-durango-2011-2020-12v-pmgr-1-4-kw-10-tooth-cw","title":"BDELI Starter for Ram 1500 \u0026 Dodge Durango 2011-2020 — 12V PMGR, 1.4 kW, 10‑tooth CW","description":"\u003cstrong\u003eBDELI 17948 is a direct-replacement 12V PMGR starter engineered to restore reliable engine cranking for compatible Ram and Dodge V8 models.\u003c\/strong\u003e\n\nThis high-output starter is designed as a one-to-one replacement for worn or failing starters on select Ram 1500, Ram 2500\/3500 and Dodge Durango vehicles from model years listed in the fitment. Manufactured in IATF 16949 and ISO 9001 factory environments and tested with professional diagnostic equipment, it targets mechanics and vehicle owners who need a dependable, OEM-style solution without rebuilding the original unit.\n\n\u003ch3\u003eWill this starter fit my Ram or Dodge exactly?\u003c\/h3\u003e\n\u003cp\u003eThe BDELI 17948 is built to match OEM mounting, tooth count, rotation and power parameters for the listed vehicles. Verify compatibility using the part numbers or your vehicle's year, engine size and model to ensure a bolt-on fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement part numbers: 17948N, 17948, 56044736AC, 56044736AB, 91273477 and more\u003c\/li\u003e\n  \u003cli\u003eFitment includes Dodge Durango 2011–2020 and Ram 1500 variants (see specific years)\u003c\/li\u003e\n  \u003cli\u003eDesigned for V8 5.7L engines where applicable after 2009\u003c\/li\u003e\n  \u003cli\u003eConfirm vehicle year and engine before purchase for guaranteed fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this starter perform compared to the original?\u003c\/h3\u003e\n\u003cp\u003eEngineered as a permanent magnet gear reduction (PMGR) starter, it matches the original's clockwise rotation, ten-tooth pinion and 1.4 kW power rating to deliver equivalent cranking torque and speed. The design focuses on consistent starts and reduced wear under normal operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12V system compatibility with CW rotation and 10 teeth\u003c\/li\u003e\n  \u003cli\u003e1.4 kW power rating for reliable engine turnover\u003c\/li\u003e\n  \u003cli\u003ePMGR type for compact size and efficient power delivery\u003c\/li\u003e\n  \u003cli\u003eQuality-tested units to reduce early failure risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality controls and testing back this replacement part?\u003c\/h3\u003e\n\u003cp\u003eBDELI sources this starter from factories certified to ISO 9001 and IATF 16949 standards, indicating consistent quality-management and automotive manufacturing controls. Each unit undergoes professional testing—using industry diagnostic equipment—to confirm electrical function, solenoid engagement and mechanical integrity before shipping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured in ISO 9001 and IATF 16949 certified facilities\u003c\/li\u003e\n  \u003cli\u003eIndividual units tested with professional DV Canada equipment\u003c\/li\u003e\n  \u003cli\u003eInspected for electrical output, pinion engagement and mounting accuracy\u003c\/li\u003e\n  \u003cli\u003eShipped as a single-piece replacement for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard starter-replacement procedures: disconnect the battery, remove electrical connections and mounting bolts, swap the unit, and verify alignment before tightening. Because it is a direct-replacement part, no modification is typically required; torque specs and safety precautions from the vehicle manual should be observed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect battery and follow vehicle-specific torque specs\u003c\/li\u003e\n  \u003cli\u003eSwap unit using OEM-style mounting holes and electrical terminals\u003c\/li\u003e\n  \u003cli\u003ePerform a starter draw and charging system check after installation\u003c\/li\u003e\n  \u003cli\u003eRegular battery and ground checks help prolong starter life\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nThe BDELI 17948 starter is intended for owners, fleet managers and independent shops seeking a reliable, ready-to-install replacement for Ram and Dodge vehicles listed in the fitment. It’s especially useful for those who want an OEM-equivalent starter that has been produced to automotive manufacturing standards and verified through professional testing, without the cost or downtime of a long rebuild process. If you require exact-match part numbers, ISO\/IATF certified production, and a compact PMGR design rated at 1.4 kW with clockwise rotation and ten teeth, this unit addresses those needs while simplifying installation and minimizing troubleshooting time.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit a 2015 Ram 1500 5.7L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the BDELI 17948 lists compatibility with Ram 1500 models and V8 5.7L applications within the stated years; verify vehicle specifics and part numbers first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the BDELI starter covered by quality certification?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — manufactured in ISO 9001 and IATF 16949 certified facilities and individually tested before shipment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BDELI","offers":[{"title":"Default Title","offer_id":67584966262969,"sku":"B0G6Z7RCH7","price":192.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bdeli-starter-front-view_f0207449-1920-446d-8a5f-40ce24197b83.jpg?v=1790461308"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/a-premium-rear-sway-bar-link-front-view_faacee72-925a-4c8f-9737-1e4313cefbcb.jpg?v=1790612491","url":"https:\/\/redleafauto.ca\/collections\/ram-parts-accessories.oembed?page=17","provider":"Redleaf Auto","version":"1.0","type":"link"}