{"title":"SKCOAUTO","description":"\u003cp\u003eBrowse 23 SKCOAUTO products at RedLeaf Auto, including tire \u0026amp; wheel tools and transmission \u0026amp; drivetrain. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"skcoauto-pneumatic-cv-joint-boot-installation-tool-with-cv-boot-26-34mm-expander-45-steel-1-4-bsp","title":"SKCOAUTO Pneumatic CV Joint Boot Installation Tool with CV Boot — 26–34mm Expander, 45# Steel, 1\/4\" BSP","description":"\u003cp\u003e\u003cstrong\u003eA pneumatic expander kit that quickly stretches CV boots onto 26–34mm shafts, saving time and protecting joints during installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis SKCOAUTO Pneumatic CV Joint Boot Installation Tool pairs a durable expander with a compatible CV boot so you can fit replacement boots fast and cleanly. Built from 45# steel and rubber-composite parts, the tool resists corrosion and stays stable under repeated shop use. It connects to standard air lines via a 1\/4-inch BSP thread and inflates the finger assembly to expand the boot over the CV joint in seconds, eliminating manual prying and reducing damage risk.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the pneumatic expander speed up CV boot replacements?\u003c\/h3\u003e\n\u003cp\u003eThe air-powered fingers expand uniformly, letting a single operator slip a new boot into place without stretching it by hand. Inflation takes seconds, which cuts installation time compared with manual methods and lowers the chance of tearing the boot lip.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRapid expansion with a single air valve activation\u003c\/li\u003e\n  \u003cli\u003eConsistent, even spread of boot material for safer fit\u003c\/li\u003e\n  \u003cli\u003eWorks with 26–34mm shafts to cover common axle sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this tool compatible with different vehicles and hoses?\u003c\/h3\u003e\n\u003cp\u003eYes — the expander is suitable for most cars, trucks and ATVs, and it’s also useful for some cooling hoses and pipe clamps. The 1\/4-inch BSP thread and replaceable air adapter improve compatibility with workshop fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits shaft diameters from 26mm to 34mm\u003c\/li\u003e\n  \u003cli\u003eOne tool handles CV boots, cooling hoses and pipe clamp tasks\u003c\/li\u003e\n  \u003cli\u003eInterchangeable air adapter and standard BSP thread for common compressors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and durability features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe SKCOAUTO tool uses hardened 45# steel and robust rubber composites, chosen to resist rust and maintain shape under repeated use. Follow the included guidance on cap-screw tightness and do not exceed the 130 psi maximum to prevent unsafe pressure conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e45# steel construction for wear resistance and stability\u003c\/li\u003e\n  \u003cli\u003eRubber composite components to protect boots and provide seal resilience\u003c\/li\u003e\n  \u003cli\u003eMaximum recommended operating pressure: 130 psi; check cap-retaining screws before use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the setup and operation for a typical shop tech?\u003c\/h3\u003e\n\u003cp\u003eThe unit requires no complex assembly — attach the air line to the BSP-thread inlet, position the boot over the expander fingers, open the valve to expand, then slide the boot into place and release. Basic checks like ensuring screw tightness and correct air pressure are the only prep steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOut-of-the-box ready with minimal setup\u003c\/li\u003e\n  \u003cli\u003eQuick operation: place boot, expand, fit, release\u003c\/li\u003e\n  \u003cli\u003eTool maintenance is limited to occasional inspection and adapter updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The SKCOAUTO Pneumatic CV Joint Boot Installation Tool is aimed at professional mechanics, small repair shops, and serious DIYers who perform frequent axle or CV boot work and want a reliable, time-saving method. It’s especially useful when you need repeatable, damage-free installations across multiple vehicle types and when workshop compressors are already in use. If you value consistent fittings, less manual strain and a tool built to resist corrosion and wear, this kit provides a practical solution without complicated assembly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What shaft sizes does this expander support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits CV shaft diameters from 26mm to 34mm, covering most common axle sizes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum safe operating pressure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Do not exceed 130 psi; always verify cap-retaining screws and control air pressure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67585677131961,"sku":"B0FHWGKH81","price":171.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-tool.jpg?v=1790475133"},{"product_id":"skcoauto-m14x1-5-lug-nuts-32-piece-black-flanged-flat-face-heat-treated-steel-corrosion-resistant","title":"SKCOAUTO M14x1.5 Lug Nuts 32-Piece Black Flanged Flat-Face — Heat-Treated Steel, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eThese SKCOAUTO M14x1.5 lug nuts are a 32-piece, two-piece flanged flat-face replacement set engineered to fit specific Ford Super Duty and F-Series applications (OE 2C2Z1012AA).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a full set of lug nuts matched to the M14x1.5 thread and designed for heavy-duty trucks, this kit delivers a complete replacement with corrosion-resistant plating and heat-treated steel construction. The package includes 32 right-hand, two-piece flanged nuts sized to the common specifications used on many Ford Super Duty pickups and motorhome chassis.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my 2003–2016 F250\/F350\/F450 or 2003–2019 F53?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are intended as direct-fit replacements for models that use M14x1.5 thread and a flanged flat face seat. Confirm fit by comparing thread, length, hex size, and seat type to your manufacturer's specifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM14x1.5 thread pitch (metric)\u003c\/li\u003e\n  \u003cli\u003eOverall length: 7\/8\" (23 mm)\u003c\/li\u003e\n  \u003cli\u003eHex size: 21 mm\u003c\/li\u003e\n  \u003cli\u003eTwo-piece flanged, flat face; right-hand threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these lug nuts?\u003c\/h3\u003e\n\u003cp\u003eSKCOAUTO builds these nuts from cold-forged, heat-treated steel and applies a triple-layer finish to resist rust and surface wear. The plated layers—typically copper, nickel and chrome—help protect the metal in road and weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-forged and heat-treated for improved strength\u003c\/li\u003e\n  \u003cli\u003eTriple-layer plating for long-lasting corrosion resistance\u003c\/li\u003e\n  \u003cli\u003ePainted black finish engineered to maintain appearance\u003c\/li\u003e\n  \u003cli\u003eGrade 8 equivalent strength across a 32-piece set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and torque should I use when installing these nuts?\u003c\/h3\u003e\n\u003cp\u003eUse a 21 mm socket for hand-tightening and final torque. Always follow the torque values specified by the vehicle or wheel manufacturer; improper torque can risk wheel security or damage components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSocket size: 21 mm\u003c\/li\u003e\n  \u003cli\u003eConfirm torque from owner's manual or wheel maker\u003c\/li\u003e\n  \u003cli\u003eInstall by hand first, then torque in a star pattern\u003c\/li\u003e\n  \u003cli\u003eCheck torque after first 50–100 miles of road use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lug nuts covered by a warranty and what should I watch for?\u003c\/h3\u003e\n\u003cp\u003eSKCOAUTO offers a 12-month warranty on manufacturing defects for this lug nut set. Inspect threads, plating, and fit on new installation; avoid cross-threading and follow wheel manufacturer guidance to prevent damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty against factory defects\u003c\/li\u003e\n  \u003cli\u003eInspect each nut before installation for damaged threads\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle\/wheel guidance to confirm correct seat and length\u003c\/li\u003e\n  \u003cli\u003eUser assumes responsibility for correct installation and torque\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 32-piece SKCOAUTO M14x1.5 lug nut set is aimed at owners and technicians who maintain Ford Super Duty trucks (F250, F350, F450) and motorhomes on F53 chassis that require M14x1.5 flanged flat-face lug nuts. It's suited to fleet maintenance shops, DIY mechanics replacing a full set, and anyone seeking a durable, plated replacement that matches OE part 2C2Z1012AA. Before purchasing, verify your wheel’s thread size, seat style, hex, and recommended torque to ensure compatibility and safe installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts match OE part 2C2Z1012AA?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, these SKCOAUTO lug nuts are designed to replace OE 2C2Z1012AA for compatible models using M14x1.5.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size is required to install these lug nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 21 mm socket; always follow the vehicle’s torque specifications for final tightening.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67586609676473,"sku":"B0F1CLK7F4","price":117.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-lug-nuts-front-packaging.jpg?v=1790488255"},{"product_id":"skcoauto-spare-tire-scissor-jack-kit-for-2004-2019-ford-f-150-2-5t-capacity-oe-compatible","title":"SKCOAUTO Spare Tire Scissor Jack Kit for 2004–2019 Ford F-150 — 2.5T Capacity, OE-Compatible","description":"\u003cstrong\u003eSKCOAUTO Spare Tire Jack Kit for 2004–2019 Ford F-150 is a heavy-duty scissor jack system, OE-compatible and rated to lift up to 2.5 tons for safe tire changes and roadside maintenance.\u003c\/strong\u003e\n\n\u003cp\u003eIf you own a 2004–2019 Ford F-150 and need a dependable replacement for the factory spare-tire jack, this SKCOAUTO kit matches OE standards (AL3Z17032A, BL3Z17081B, BL3Z17A024A) and delivers stable lifting performance. Built from thickened, corrosion-resistant steel with a reinforced base and stepped structure, the kit is engineered for repeated use and secure support while changing tires or performing light underbody work.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this jack make changing a tire easier?\u003c\/h3\u003e\n\u003cp\u003eThe scissor jack uses a bidirectional mechanical design that lifts evenly on both sides, cutting the physical effort required compared with older single-direction jacks. The simple crank mechanism is intuitive to operate and fits standard tire tool sockets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBidirectional lifting reduces crank force and stabilizes the vehicle.\u003c\/li\u003e\n  \u003cli\u003eErgonomic crank interface works with common lug-wrench tools.\u003c\/li\u003e\n  \u003cli\u003eRated 2.5-ton capacity suitable for F-150 curb weights and loaded wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this kit compatible with my F-150 model years 2004–2019?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit is designed to fit all F-150 variants across 2004–2019 and follows OE part references for direct replacement. It integrates with the truck’s spare-tire mounting point and factory stow locations without major modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE numbers AL3Z17032A, BL3Z17081B, BL3Z17A024A referenced for fit verification.\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions designed for factory spare-well storage.\u003c\/li\u003e\n  \u003cli\u003eWorks with stock spare-wheel position and wheel-well mounts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the SKCOAUTO scissor jack?\u003c\/h3\u003e\n\u003cp\u003eManufactured from high-strength steel with a thickened base plate and reinforced rolled edges, the jack resists bending and maintains stability under load. Corrosion-resistant finishes extend service life even when stored in damp wheel wells.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty steel construction and stepped support structure for rigidity.\u003c\/li\u003e\n  \u003cli\u003eEnlarged base plate for improved ground contact and stability.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant surface treatment to prevent rust in storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical accessories or features come with the kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with the scissor jack and a compatible crank\/lug interface designed for quick setup and compact storage. It’s intended as a complete spare jack replacement so you can stow it with the spare tire and tools in your F-150.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded crank\/operating rod that mates with factory socket locations.\u003c\/li\u003e\n  \u003cli\u003eDesigned for compact storage in the spare-wheel well.\u003c\/li\u003e\n  \u003cli\u003eOE-style mounting compatibility for hassle-free replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The SKCOAUTO Spare Tire Jack Kit is ideal for F-150 owners (2004–2019) who want an OE-compatible, heavy-duty replacement that’s easier to operate than older scissor jacks. It suits drivers who keep their own roadside tools, fleet managers who maintain pickup trucks, and anyone looking for a durable, corrosion-resistant spare jack that fits factory storage and meets a 2.5-ton rated load capacity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What load capacity does the SKCOAUTO jack support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The scissor jack is rated to 2.5 tons — suitable for small and medium passenger vehicles including F-150s.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this jack fit all 2004–2019 Ford F-150 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit references OE part numbers AL3Z17032A, BL3Z17081B, BL3Z17A024A for direct compatibility across those model years.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67586830237881,"sku":"B0FFYKFCVN","price":175.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-packaging-spare-tire-jack-kit.jpg?v=1790493663"},{"product_id":"skcoauto-spare-tire-jack-kit-2-5-ton-scissor-jack-for-gm-trucks-suvs-oem-compatible-reinforced-base","title":"SKCOAUTO Spare Tire Jack Kit 2.5 Ton Scissor Jack for GM Trucks \u0026 SUVs — OEM‑Compatible, Reinforced Base","description":"\u003cp\u003e\u003cstrong\u003eSKCOAUTO 22969377 Spare Tire Jack Kit is a heavy-duty 2.5‑ton scissor jack and tool set engineered to replace OEM kits on many Chevrolet, GMC and Cadillac trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as an OEM-compatible spare tire tool kit, this assembly matches multiple original part numbers and fits a wide range of GM models from late‑1990s to 2019. The kit centers on a reinforced scissor jack that extends from 90 mm closed to 360 mm fully open, plus the handle and hardware required to access and lower a factory-mounted spare. Built from high‑strength steel with corrosion resistance and a widened base plate, the kit aims to provide a stable, long-lasting roadside solution when you need to change a tire or raise a vehicle for inspection.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and OEM part numbers does this kit match?\u003c\/h3\u003e\n\u003cp\u003eThis SKCOAUTO spare tire kit is made to be compatible with many GM full‑size models spanning two decades. It lists numerous OEM cross‑references so you can verify fitment against your vehicle's factory tool kit requirements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Silverado 1999–2019, Tahoe 1999–2019, Avalanche 2002–2013, Suburban 1999–2019.\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Sierra (non C\/K body) 1999–2019, Yukon 2000–2019, Escalade 2002–2019, Escalade ESV\/EXT years shown.\u003c\/li\u003e\n  \u003cli\u003eOEM cross numbers: 22925281, 22925285, 22969377, 22969370, 20782704, 20782706, 20782708 and others for easy verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much weight can the scissor jack lift and what are its travel dimensions?\u003c\/h3\u003e\n\u003cp\u003eThe included scissor jack is rated for heavy lifting on passenger trucks and SUVs and provides a practical stroke for spare‑tire access. Its capacity and travel make it suitable for many small and medium vehicles as well as larger SUVs when used on level ground with proper support.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated load capacity: 2.5 tons (5,000 lbs) for robust lifting capability.\u003c\/li\u003e\n  \u003cli\u003eHeight range: 90 mm closed to 360 mm fully extended to reach a spare or suspension points.\u003c\/li\u003e\n  \u003cli\u003eDesigned for typical vehicle jacking points; always use jack stands for extended work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat design features make this kit easier and safer to use?\u003c\/h3\u003e\n\u003cp\u003eSKCOAUTO redesigned the scissor jack and hardware to reduce effort and increase stability during roadside tire changes. The mechanical layout and reinforced components lower user strain and improve contact with the vehicle base.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBidirectional mechanical structure allows more balanced lifting and reduces required crank effort.\u003c\/li\u003e\n  \u003cli\u003eThickened widened base plate and rolled, stepped edges increase footprint and resistance to deformation.\u003c\/li\u003e\n  \u003cli\u003eHigh‑strength, corrosion‑resistant steel construction improves long‑term durability in storage and field use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how should it be installed?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the scissor jack, a folding or multi‑piece handle, and any vehicle‑specific hardware needed to access a factory spare. Installation and use follow OEM guidance — store the kit securely in the factory spare area when not in use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes scissor jack plus crank handle and attachment pieces for lowering spare assemblies.\u003c\/li\u003e\n  \u003cli\u003eReplace original factory kit by aligning mounting points and securing with existing fasteners.\u003c\/li\u003e\n  \u003cli\u003eInspect the jack and handle before each use; lubricate moving parts for smoother operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers and fleet owners of GM full‑size trucks and SUVs seeking an OEM‑compatible spare tire tool kit that restores missing or worn factory equipment. It’s aimed at owners who want a durable, high‑capacity scissor jack with improved stability and lower crank effort for occasional roadside tire changes or emergency lifting tasks. This kit is also useful for mechanics and restoration projects where original part numbers or fitment are required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this jack compatible with my 2015 Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit lists fitment for Silverado models 1999–2019; confirm with your vehicle’s OEM part number or mounting arrangement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this jack for routine vehicle maintenance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s suitable for lifting to change a spare; use rated jack stands for any extended maintenance or under‑vehicle work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67586833416377,"sku":"B0FSQSKM9D","price":148.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-of-spare-tire-jack-kit.jpg?v=1790493767"},{"product_id":"skcoauto-m14x1-5-spike-lug-nuts-24-pack-black-hardened-steel-closed-end-60-conical-seat","title":"SKCOAUTO M14x1.5 Spike Lug Nuts 24-Pack Black — Hardened Steel Closed-End 60° Conical Seat","description":"\u003cp\u003e\u003cstrong\u003eThese are 24 solid one-piece M14x1.5 spiked lug nuts from SKCOAUTO, finished in black and supplied with a matching socket key for secure, aftermarket 6-lug truck wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for many GM 6-lug trucks and SUVs, these spike-style lug nuts combine a bold visual accent with hardened steel construction for dependable wheel fastening. The set includes 24 closed-end, conical-seat (60°) nuts sized to 14x1.5 threads and a 3\/4\" (19mm) hex socket key to install and remove them. Cold forged and heat treated, they target drivers who want both a performance-minded fit and an aggressive exterior update for Silverado, Sierra, Yukon, Escalade and similar vehicles with 6-lug aftermarket wheels.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my 6-lug Silverado or Sierra?\u003c\/h3\u003e\n\n\u003cp\u003eIf your truck uses a 6-lug wheel with 14x1.5 threads and a 60° conical seat, this set will fit. Measure your wheel’s thread pitch and seat type before ordering to confirm compatibility. These nuts are intended for aftermarket wheels that accept closed-end lug nuts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThread pitch: M14 x 1.5 (14mm diameter, 1.5mm pitch)\u003c\/li\u003e\n  \u003cli\u003eSeat style: 60° conical (tapered) seat\u003c\/li\u003e\n  \u003cli\u003eHex size: 3\/4\" (19mm) for installation\u003c\/li\u003e\n  \u003cli\u003eOverall length: 4.37\" solid spike design, closed end\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe are these lug nuts for daily driving?\u003c\/h3\u003e\n\n\u003cp\u003eSKCOAUTO manufactures these lug nuts from cold-forged, heat-treated steel to increase tensile strength and resist wear from repeated torque cycles. The one-piece construction reduces potential failure points compared with multi-piece designs, while the closed-end profile helps protect wheel studs from corrosion and debris.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial: cold forged steel with heat treatment for toughness\u003c\/li\u003e\n  \u003cli\u003eConstruction: solid one-piece for consistent strength\u003c\/li\u003e\n  \u003cli\u003eProtection: closed-end design shields studs from contaminants\u003c\/li\u003e\n  \u003cli\u003eFinish: black coating for corrosion resistance and appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and remove these spike lug nuts without damaging them?\u003c\/h3\u003e\n\n\u003cp\u003eUse the supplied socket key and a torque wrench to tighten nuts to your vehicle manufacturer’s specified torque value. Avoid impact guns with excessive force; controlled torque ensures proper clamping and prevents stripping. When removing, back off in a star pattern to relieve wheel stress evenly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncluded tool: SKCOAUTO 3\/4\" (19mm) socket key for safe installation\u003c\/li\u003e\n  \u003cli\u003eRecommend tool: calibrated torque wrench, follow factory torque specs\u003c\/li\u003e\n  \u003cli\u003eRemoval tip: loosen in crisscross\/star pattern for even pressure release\u003c\/li\u003e\n  \u003cli\u003eMaintenance: inspect periodically for corrosion or loosening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly is included and what warranty support do I get?\u003c\/h3\u003e\n\n\u003cp\u003eThe package contains 24 spike-style lug nuts in black and one socket key sized for the 3\/4\" hex. SKCOAUTO backs the set with a 30-day return policy and a 12-month warranty against manufacturing defects, plus customer support for fitment questions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eContents: 24 closed-end spike lug nuts and 1 socket key\u003c\/li\u003e\n  \u003cli\u003eColor: black finish for a sleek, aggressive look\u003c\/li\u003e\n  \u003cli\u003eSupport: 30-day returns and 12-month warranty from SKCOAUTO\u003c\/li\u003e\n  \u003cli\u003eFitment guidance: contact support for vehicle compatibility help\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These lug nuts suit truck and SUV owners who need M14x1.5 threaded hardware for 6-lug aftermarket wheels and want a heavy-duty, stylish replacement. They’re aimed at DIY enthusiasts, truck owners upgrading wheel aesthetics, and anyone who wants closed-end protection for their wheel studs while keeping a strong, one-piece fastening solution. If you require a different thread, seat type, or open-ended nuts for stud inspection, consider verifying fitment or choosing an alternative SKU.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit 6-lug GM trucks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your wheels use M14x1.5 threads and a 60° conical seat; confirm wheel seat type before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is a special tool included for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the set includes a 3\/4\" (19mm) socket key; use a torque wrench to tighten to factory specs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67586937618617,"sku":"B0DMR5BF66","price":109.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-packaging-spike-lug-nuts.jpg?v=1790497454"},{"product_id":"skcoauto-m14x1-5-spike-lug-nuts-24-pc-chrome-one-piece-cold-forged-steel-socket-included","title":"SKCOAUTO M14x1.5 Spike Lug Nuts 24-Pc Chrome — One-Piece Cold-Forged Steel, Socket Included","description":"\u003cp\u003e\u003cstrong\u003eThese are SKCOAUTO M14x1.5 one-piece spiked lug nuts — a 24-piece chrome set with a matching socket key engineered for aftermarket 6-lug truck and SUV wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade the look and fastener performance of your Silverado, Sierra 1500, Suburban, Yukon, Avalanche, Escalade, or other 6-lug vehicles with this complete lug nut kit. Each lug nut is cold-forged and heat-treated steel built as a solid one-piece design, offering a durable alternative to fragile multi-piece caps. The spike style and chrome finish deliver an aggressive aesthetic while the closed-end, 60° conical seat maintains correct wheel fitment on compatible aftermarket wheels.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my 6-lug aftermarket wheels?\u003c\/h3\u003e\n\u003cp\u003eThey are made for wheels that use M14x1.5 threads and a 60° conical seat. Confirm your wheel stud pitch and seat type before buying; these are not universal for all wheels or studs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread pitch: M14 x 1.5\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° conical (tapered)\u003c\/li\u003e\n  \u003cli\u003eHex size: 3\/4\" (19 mm) for installation\/removal\u003c\/li\u003e\n  \u003cli\u003eOverall length: 4.37\" (spiked, closed-end)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these lug nuts under daily driving?\u003c\/h3\u003e\n\u003cp\u003eManufactured from cold-forged and heat-treated steel, the lug nuts are designed to withstand regular highway and off-road conditions better than thin, decorative caps. The solid one-piece construction eliminates weaknesses common to multi-piece designs that can loosen or separate over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCold-forged steel improves structural strength\u003c\/li\u003e\n  \u003cli\u003eHeat treatment increases resistance to deformation\u003c\/li\u003e\n  \u003cli\u003eClosed-end design protects threads from contaminants\u003c\/li\u003e\n  \u003cli\u003eChrome finish resists corrosion and maintains appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes 24 spiked lug nuts plus a dedicated socket key to install and remove them safely. Use a torque wrench with the 3\/4\" (19 mm) socket to achieve the correct torque setting for your vehicle’s wheel studs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 24 lug nuts — ideal for six-wheel mounting plus spares\u003c\/li\u003e\n  \u003cli\u003eSocket key included for secure installation\/removal\u003c\/li\u003e\n  \u003cli\u003eRecommended tool: 3\/4\" (19 mm) torque wrench or impact with appropriate adapter\u003c\/li\u003e\n  \u003cli\u003eClosed-end nuts protect internal threads from rust and dirt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the spike style affect wheel clearance and appearance?\u003c\/h3\u003e\n\u003cp\u003eThe aggressive spike profile changes the vehicle’s visual stance and can draw attention to aftermarket wheels. Measure wheel and brake clearance before installing: the long 4.37\" overall length may interfere with deep-mounted or recessed wheel designs or aftermarket hub covers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpike length: 4.37\" OAL — provides bold styling\u003c\/li\u003e\n  \u003cli\u003eChrome finish complements polished or chrome wheel faces\u003c\/li\u003e\n  \u003cli\u003eClosed-end spikes protect lug threads while enhancing looks\u003c\/li\u003e\n  \u003cli\u003eCheck clearance with brake calipers and wheel covers first\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This SKCOAUTO set suits truck and SUV owners who want a robust replacement for OEM lug nuts and a striking spiked aesthetic for aftermarket 6-lug wheels. Ideal buyers are owners of Silverado, Sierra 1500, Suburban, Yukon, Avalanche, Escalade, and similar 6-lug vehicles who can confirm M14x1.5 thread pitch and 60° conical seat compatibility. If you need a durable, closed-end lug nut with a distinctive look and a socket key included, this 24-piece kit is tailored to that purpose. The product comes in chrome and includes a 12-month warranty for added assurance.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with my Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit if your Silverado uses M14x1.5 threads and a 60° conical seat; confirm wheel stud pitch and seat type first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do they include a tool for removal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes a matching socket key; use a 3\/4\" (19 mm) torque wrench for proper tightening.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67586948497593,"sku":"B0DMRPF2J3","price":102.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-packaging-lug-nuts.jpg?v=1790497607"},{"product_id":"skcoauto-m14x2-0-lug-nuts-24-piece-chrome-closed-end-set-for-f-150-2001-2014-10-9-steel-60-cone","title":"SKCOAUTO M14x2.0 Lug Nuts – 24-Piece Chrome Closed-End Set for F-150 2001–2014, 10.9 Steel 60° Cone","description":"\u003cp\u003e\u003cstrong\u003eThese SKCOAUTO M14x2.0 lug nuts are a 24-piece, chrome-finished closed-end replacement set engineered to fit 2001–2014 Ford F-150, 2003–2014 Expedition, and 2003–2014 Navigator stock wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a direct OE-style replacement that matches factory thread pitch and seat type, this complete kit provides all 24 lug nuts with a cone-seat profile, 13\/16\" (21mm) hex, and a 2.17\" overall length. Each lug nut is a one-piece, 10.9-grade heat-treated steel design with a chrome finish and closed end to keep out dirt and moisture. The set replaces common OEM part numbers and has been salt-spray corrosion tested for extended surface protection.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts bolt on to my F-150 or Expedition?\u003c\/h3\u003e\n\u003cp\u003eYes — these lug nuts are made to match the OE-style specifications used on many Ford trucks and large SUVs. They use an M14x2.0 thread pitch and a 60° cone seat, which aligns with stock wheel designs for the listed model years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM14 x 2.0 thread pitch for direct compatibility\u003c\/li\u003e\n  \u003cli\u003e60° cone seat to match factory wheel taper\u003c\/li\u003e\n  \u003cli\u003e13\/16\" (21mm) hex head fits common lug wrenches and sockets\u003c\/li\u003e\n  \u003cli\u003eDesigned for 2001–2014 F-150, 2003–2014 Expedition\/Navigator\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features do these lug nuts offer?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are manufactured from 10.9-grade, heat-treated steel for strength and fatigue resistance, then finished in chrome for corrosion protection and a factory look. They are closed-end to shield threads from contaminants and have undergone 72-hour salt spray testing to verify surface durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10.9-grade heat-treated steel construction for improved strength\u003c\/li\u003e\n  \u003cli\u003eChrome plating resists rust and preserves appearance\u003c\/li\u003e\n  \u003cli\u003eClosed-end design prevents moisture and road debris entry\u003c\/li\u003e\n  \u003cli\u003e72-hour salt spray tested for corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow many lug nuts come in the set and which OEM numbers do they replace?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes 24 lug nuts—enough to fully replace all wheel nuts on most dual-front lug applications or to restock a shop. It is sold as a complete set and can substitute for several OE references to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTotal quantity: 24 lug nuts in a single package\u003c\/li\u003e\n  \u003cli\u003eReplaces OE part numbers such as 4L3Z1012A, 7L1Z1012A, 611288, and 9100042\u003c\/li\u003e\n  \u003cli\u003eSold as a full set to avoid mismatched hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality control come with the lug nuts?\u003c\/h3\u003e\n\u003cp\u003eSKCOAUTO backs this product with a 12-month warranty and applies strict quality control during production to ensure uniform dimensions and finish. All parts are 100% new and inspected before shipping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty for peace of mind\u003c\/li\u003e\n  \u003cli\u003eFactory quality control checks for consistency\u003c\/li\u003e\n  \u003cli\u003e100% new components—no remanufactured pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers or fleet managers who need a reliable, OE-spec replacement for worn or missing lug nuts on 2001–2014 Ford F-150 trucks and 2003–2014 Expeditions and Navigators. It’s also suitable for mechanics and hobbyists looking for a full 24-piece chrome set with closed-end protection, heavy-duty steel construction, and confirmed fitment to common OEM part numbers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with aftermarket wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit wheels that accept M14x2.0 threads and a 60° cone seat; confirm your wheel's thread and seat type before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reuse my original lug bolts with these nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: These are closed-end nuts designed to replace factory nuts; pairing with original lug bolts depends on wheel design—verify compatibility first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67587741122745,"sku":"B0DM8XZDP5","price":91.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-lug-nuts-front-packaging_f354a851-cd03-41ef-adc7-ea96d8b141e9.jpg?v=1790515165"},{"product_id":"skcoauto-m14x1-5-lug-nuts-24-piece-set-black-oem-style-60-conical-closed-end-scm-steel","title":"SKCOAUTO M14x1.5 Lug Nuts 24-Piece Set — Black OEM-Style, 60° Conical Closed-End, SCM Steel","description":"\u003cp\u003e\u003cstrong\u003eThese SKCOAUTO M14x1.5 lug nuts are a 24-piece OEM-style replacement set engineered to fit many GM 6‑lug factory wheels with a 60° conical seat and closed-end design.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle uses M14x1.5 lug nuts and you want an exact OE-style swap, this kit offers the correct thread pitch, hex size and seat geometry for a wide range of Chevrolet, GMC and Cadillac models. Machined from SCM steel with a one-piece solid construction and a black finish, these lug nuts match factory fit and appearance while resisting corrosion. The set includes 24 lug nuts — ideal for axles or spare coverage — and is backed by a one-year guarantee.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and wheels will these lug nuts fit?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are built to replace original equipment on many GM trucks and SUVs with 6-lug wheels. Fitment covers specific model years and trims where the factory uses M14x1.5 thread pitch and a 60° bulge conical seat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCadillac: ENCLAVE 2008–2023, ESCALADE 2006–2024, LYRIQ 2023, XT5 2017–2020, XT6 2021, XTS 2014–2019\u003c\/li\u003e\n  \u003cli\u003eChevrolet: AVALANCHE, BLAZER 2019–2024, COLORADO 2015–2021, EQUINOX 2011–2024, SILVERADO 1500\/2500\/3500 (various years)\u003c\/li\u003e\n  \u003cli\u003eGMC: SIERRA \u0026amp; YUKON ranges, CANYON, ACADIA, TERRAIN and more as listed in the full fitment\u003c\/li\u003e\n  \u003cli\u003eAlso replaces several OEM part numbers such as 6509422AA and 9596070\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these lug nuts compare to two-piece or capped designs?\u003c\/h3\u003e\n\u003cp\u003eSKCOAUTO uses a one-piece solid construction to avoid the failure modes that affect capped or two-piece lug nuts. A one-piece nut eliminates internal caps and seams where moisture and salt can cause rust, making maintenance easier over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid SCM steel body for improved strength and durability\u003c\/li\u003e\n  \u003cli\u003eTested 72 hours salt spray for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eClosed-end design prevents debris ingress and protects studs\u003c\/li\u003e\n  \u003cli\u003eBlack finish for factory-matching appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact specifications and installation details?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are sized and shaped to match OE dimensions so they thread on and seat properly without modification. Confirm your vehicle uses M14x1.5 pitch and 60° conical seat before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 24 lug nuts, closed-end, one-piece\u003c\/li\u003e\n  \u003cli\u003eThread pitch: M14 x 1.5; Hex: 7\/8\" (22 mm)\u003c\/li\u003e\n  \u003cli\u003eOverall height: 1.77\" (45 mm); diameter: 1.19\" (30 mm)\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° bulge conical; material: SCM steel; color: black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and long-term protections are provided?\u003c\/h3\u003e\n\u003cp\u003eThe set includes a one-year guarantee and passes industry salt-spray testing to help resist rust and corrosion during typical use. While the finish improves longevity, routine inspection and correct torque are recommended for safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e72-hour salt spray tested to evaluate corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eOne-year limited warranty for workmanship and defects\u003c\/li\u003e\n  \u003cli\u003eClosed-end design reduces exposure of threads to elements\u003c\/li\u003e\n  \u003cli\u003eDesigned as direct OE-style replacements — torque to factory spec\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 24-piece SKCOAUTO lug nut set is suited for owners, mechanics and fleet managers who need a reliable OEM-style replacement for GM 6-lug wheels. Choose this pack if you want correct fitment (M14x1.5, 60° seat), one-piece steel construction for durability, and enough quantity to service both axles or keep spares on hand.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit my Silverado 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Silverado 1500 model years (2000–2023) that use M14x1.5 threads and a 60° conical seat. Confirm your wheel uses that spec before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wrench size is required to install these nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 7\/8\" (22 mm) socket or wrench to install these SKCOAUTO lug nuts to the manufacturer torque spec.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67588120838329,"sku":"B0DMR5CTY7","price":86.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-view-packaged-lug-nuts.jpg?v=1790516597"},{"product_id":"skcoauto-m14x1-5-lug-nuts-set-24pc-chrome-closed-end-10-9-steel-oe-style-fit-for-2015-2021-ford","title":"SKCOAUTO M14x1.5 Lug Nuts Set — 24pc Chrome Closed-End, 10.9 Steel OE-Style Fit for 2015–2021 Ford","description":"\u003cstrong\u003eSKCOAUTO 24 pcs M14x1.5 lug nuts are a complete OE-style replacement set designed for 2015–2021 Ford Expedition, F150, and Navigator wheels with 14x1.5 thread pitch.\u003c\/strong\u003e\n\n\u003cp\u003eThese lug nuts provide a direct-fit, one-piece alternative to factory bulge\/ acorn-style lug nuts. Machined from heat-treated 10.9-grade steel and finished in chrome, the set of 24 closed-end cone-seat nuts offers corrosion resistance and solid clamping for stock wheels that require a 13\/16\" (21mm) hex. They are made to replace common OE numbers and fit original wheel studs without modification.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lug nuts match Ford OE specifications?\u003c\/h3\u003e\n\u003cp\u003eEach SKCOAUTO lug nut is manufactured to match the critical dimensions and seating used on many Ford factory wheels: M14x1.5 thread pitch, 60° cone seat, 1.77\" overall length, and a 13\/16\" hex size. That ensures correct seating, torque transfer, and wheel alignment comparable to original parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread pitch: 14x1.5 to match factory studs\u003c\/li\u003e\n  \u003cli\u003eSeat angle: 60° cone to mate with OE wheel tapered seat\u003c\/li\u003e\n  \u003cli\u003eHex: 13\/16\" (21mm) for standard lug wrench fit\u003c\/li\u003e\n  \u003cli\u003eOverall length: 1.77\" for proper engagement and closed-end protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and tests back their durability?\u003c\/h3\u003e\n\u003cp\u003eThese one-piece lug nuts are forged from 10.9-grade heat-treated steel for high tensile strength and fatigue resistance. They undergo a 72-hour salt spray corrosion test and a chrome plating finish to reduce rust and maintain appearance under road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10.9-grade heat-treated steel construction for strength\u003c\/li\u003e\n  \u003cli\u003eChrome finish for corrosion resistance and visual match to stock wheels\u003c\/li\u003e\n  \u003cli\u003e72-hour salt spray testing to validate surface durability\u003c\/li\u003e\n  \u003cli\u003eClosed-end design protects threads from dirt and moisture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lug nuts fit my vehicle and replace OEM part numbers?\u003c\/h3\u003e\n\u003cp\u003eThis set is intended to replace 14mm x 1.5 OE bulge\/ acorn lug nuts on specific Ford models and lists common OE references. The pack of 24 covers full wheel sets and spare\/extra needs for full-size trucks and SUVs using the same lug spec.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2015–2021 Ford Expedition and many F150\/Navigator stock wheels\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers such as 611008, 611-008, 611-008-1, ACPZ1012B\u003c\/li\u003e\n  \u003cli\u003eSet of 24 nuts—enough for 4 wheels plus extras\u003c\/li\u003e\n  \u003cli\u003eClosed-end, cone-seat design matches factory seating style\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these lug nuts for best performance?\u003c\/h3\u003e\n\u003cp\u003eInstall using a 13\/16\" (21mm) socket and torque to your vehicle manufacturer’s specified lug torque. Avoid using excessive impact gun torque; if a powered tool is used, finish to torque with a calibrated torque wrench. Periodic inspection for corrosion and proper torque helps ensure long service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse 13\/16\" (21mm) socket and follow Ford torque specs\u003c\/li\u003e\n  \u003cli\u003eFinish tightening with a torque wrench for accurate clamping\u003c\/li\u003e\n  \u003cli\u003eInspect visually for rust or damage, especially after winter use\u003c\/li\u003e\n  \u003cli\u003eClosed-end design limits debris—clean before installation if needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Vehicle owners, mechanics, and fleet managers who need a reliable, OE-style replacement lug nut set for Ford full-size trucks and SUVs. This 24-piece chrome set is best for those replacing worn or damaged factory nuts, preparing a spare wheel set, or refurbishing stock wheels where correct thread pitch, cone-seat fit, and corrosion resistance are required. Backed by a 12-month warranty and manufactured under quality controls, the SKCOAUTO set is targeted at users seeking straightforward, direct-fit hardware without custom modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit 2018 Ford F-150 stock wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—these are M14x1.5 cone-seat lug nuts designed to replace factory bulge\/acorn nuts on many 2015–2021 F-150 stock wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size do I need to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 13\/16\" (21mm) socket and tighten to the vehicle manufacturer’s specified lug torque.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67588526244025,"sku":"B0DM8SFYVB","price":85.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-lug-nuts-front-packaging_83545fde-764c-47c4-89d9-4ea30e6e7455.jpg?v=1790519650"},{"product_id":"skcoauto-cv-boot-repair-kit-4pcs-for-26-34mm-shafts-125mm-height-silicone-boots-with-stainless-steel-clamps-pliers","title":"SKCOAUTO CV Boot Repair Kit 4PCS for 26–34mm Shafts, 125mm Height — Silicone Boots with Stainless Steel Clamps \u0026 Pliers","description":"\u003cp\u003e\u003cstrong\u003eSKCOAUTO 4PCS CV Boot Repair Kit is a full replacement set of durable silicone CV joint boots, clamps, ties and pliers sized to fit shafts 26–34mm and 125mm height for reliable driveshaft protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit supplies everything needed to restore the constant-velocity (CV) joint sealing on many cars, trucks, SUVs and ATVs. Built from oil- and temperature-resistant silicone, the boots resist abrasion, tearing and environmental corrosion so the joint remains protected from grease loss and dirt intrusion. The set includes adjustable stainless-steel ties and a clamp tool that both locks securely and trims excess strap for a neat, long-lasting repair.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these CV boots hold up to road salt, heat and grease?\u003c\/h3\u003e\n\n\u003cp\u003eThe SKCOAUTO boots are molded from a resilient silicone compound formulated to resist oil, grease, high temperatures and salt-induced corrosion. That material choice helps prevent cracking and aging when exposed to engine heat or deicing chemicals, extending service life compared with lower-grade rubber boots.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eSilicone construction resists tearing, abrasion and chemical attack.\u003c\/li\u003e\n\u003cli\u003eDesigned for temperature extremes and engine-area heat.\u003c\/li\u003e\n\u003cli\u003eWeather-resistant to reduce corrosion from moisture and salt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the clamps and ties make the repair leak-proof?\u003c\/h3\u003e\n\n\u003cp\u003eYes—the kit includes stainless-steel ties with a locking tooth design and a dedicated clamp plier that tightens the strap to the desired tension. The locking teeth keep the band at a fixed length and the pliers allow secure closure and trimming of excess, creating a tight seal to retain grease and block debris.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eAdjustable clamp size to match boot and joint diameter.\u003c\/li\u003e\n\u003cli\u003eLocking teeth secure the strap without slipping.\u003c\/li\u003e\n\u003cli\u003eIncluded tool cuts off excess strap for a clean finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and shaft sizes does this kit fit?\u003c\/h3\u003e\n\n\u003cp\u003eThis SKCOAUTO set fits many passenger vehicles, light trucks, SUVs and ATVs with shafts in the 26–34mm range and boots of approximately 125mm height. Always verify the actual shaft diameter and boot height on your vehicle before buying since some models use special or nonstandard joint sizes.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eFits shaft diameters: 26mm–34mm.\u003c\/li\u003e\n\u003cli\u003eBoot height: 125mm (measure to confirm compatibility).\u003c\/li\u003e\n\u003cli\u003eSuitable for a wide range of cars, trucks, SUVs and ATVs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is the installation and what tools are included?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is achievable for a competent DIYer or a mechanic. The kit supplies the stainless-steel ties and a clamp plier to tighten and trim the bands; typical additional tools include basic hand tools to remove the drive axle and some grease for joint repacking if required.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eIncludes clamp pliers and stainless-steel ties for sealing and trimming.\u003c\/li\u003e\n\u003cli\u003eRequires common hand tools for axle removal and joint access.\u003c\/li\u003e\n\u003cli\u003eRepacking the CV joint with fresh grease may be necessary during service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This 4PCS SKCOAUTO CV Boot Repair Kit is aimed at vehicle owners, DIY mechanics and professional technicians who need a cost-effective replacement set for preventive maintenance or to repair a torn CV boot. It’s best for those with shafts roughly 26–34mm in diameter and who want a weather-resistant silicone option with secure stainless-steel clamps and a trimming tool included. Confirm measurements for your specific make and model to ensure a proper fit before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my vehicle's CV shaft?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Measure the shaft diameter—this kit fits 26–34mm shafts and boots about 125mm tall; confirm dimensions before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the clamps corrosion-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit uses stainless-steel ties designed to resist corrosion and hold a secure seal against moisture and salt.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67588532437177,"sku":"B0FHWH5FVZ","price":85.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-packaging-cv-boot-kit.jpg?v=1790519710"},{"product_id":"skcoauto-7-16-20-lug-nuts-for-chevy-k10-1971-1985-24pc-chrome-60-tapered-seat","title":"SKCOAUTO 7\/16-20 Lug Nuts for Chevy K10 (1971–1985) — 24pc Chrome, 60° Tapered Seat","description":"\u003cp\u003e\u003cstrong\u003eThese are a set of 24 solid one-piece 7\/16-20 lug nuts finished in three-layer chrome with a 60° tapered seat, sized for many Chevrolet trucks and classic models including K10 (1971–1985).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for restorations and wheel replacements on vintage Chev trucks and related GM models, this lug-nut kit pairs cold-forged SCM steel strength with corrosion-resistant plating. Each nut has a 3\/4\" hex head, measures 1.38\" long with a 0.87\" flange width, and accepts wheels that use a 60° conical seat. These are NOT compatible with flat, 90° mag, ball, or radius-seat wheels — verify wheel seat type and flange clearance before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Chevy K10 or other classic GM wheel?\u003c\/h3\u003e\n\n\u003cp\u003eThey fit wheels that require 7\/16-20 threads and a 60° tapered\/conical seat; many aftermarket and factory wheels on classic Chevrolets match that specification. Consult your wheel manual or measure the seat angle and flange clearance to confirm compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThread size: 7\/16-20 (coarse)\u003c\/li\u003e\n  \u003cli\u003eSeat angle: 60° tapered\/conical — not for flat\/ball\/radius seats\u003c\/li\u003e\n  \u003cli\u003eFlange limit: 0.87\" maximum — must clear wheel hub and cap\u003c\/li\u003e\n  \u003cli\u003eCommon fits: K10 1971–1985 plus many Blazer, Camaro, El Camino, Nova models listed in fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these lug nuts against rust and road exposure?\u003c\/h3\u003e\n\n\u003cp\u003eThe nuts are made from heat-treated SCM steel (10.9 grade) and are cold-forged for strength. A three-layer chrome finish protects against oxidation and chemical exposure, and the parts pass a 72-hour ASTM B117 salt spray test for enhanced corrosion resistance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial: 10.9 Grade SCM heat-treated steel\u003c\/li\u003e\n  \u003cli\u003eManufacturing: cold-forged, single-piece construction\u003c\/li\u003e\n  \u003cli\u003eFinish: triple-layer chrome plating for rust resistance\u003c\/li\u003e\n  \u003cli\u003eTesting: 72-hour ASTM B117 salt spray certification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat physical specs and installation details should I know?\u003c\/h3\u003e\n\n\u003cp\u003eEach lug nut uses a 3\/4\" (0.75\") hex head for standard sockets, measures approximately 1.38\" in overall length, and has a flange\/width of 0.87\". Because they are tapered-seat lug nuts, they seat into conical wheel holes — improper match or installation can cause wheel damage or safety issues.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHex size: 3\/4\" for wrench\/socket\u003c\/li\u003e\n  \u003cli\u003eOverall length: 1.38\" (approx.)\u003c\/li\u003e\n  \u003cli\u003eFlange\/width: 0.87\" maximum — check wheel clearance\u003c\/li\u003e\n  \u003cli\u003eDo not use with wheel caps; confirm torque specs and thread engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat precautions and after-sales support are provided?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm that your wheels accept a 60° tapered nut and that flange clearance is under 0.87\" before installing. Improper selection or tightening may lead to wheel failure; follow vehicle torque specifications and inspect threads for damage. SKCOAUTO provides a 12-month after-sales policy for quantity or quality concerns.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCheck wheel seat angle and flange clearance before purchase\u003c\/li\u003e\n  \u003cli\u003eNot compatible with wheel caps or non-conical seats\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer torque recommendations during installation\u003c\/li\u003e\n  \u003cli\u003e12-month after-sales support for shortages or defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 24-piece lug-nut set suits enthusiasts restoring late-1970s and early-1980s Chevrolet trucks and GM compact models, mechanics replacing worn fasteners on period-correct wheels, and owners seeking stronger, corrosion-resistant lug hardware for vintage Chevy pickups like the K10 (1971–1985) and similar models. If your wheels require 7\/16-20 threads and a 60° tapered seat and you can accommodate a 0.87\" flange, this kit delivers OEM-style fit with upgraded plating and material strength.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit 1979 K10 wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your 1979 K10 wheels use 7\/16-20 threads and a 60° tapered seat with less than 0.87\" flange clearance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these with wheel caps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — these lug nuts are not compatible with wheel caps; they require full access to the hex and flange area.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67590823411897,"sku":"B0FRR2LVRK","price":77.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-lug-nuts-front-packaging_6133a21f-6bd9-4631-9856-529a058f67a8.jpg?v=1790538421"},{"product_id":"skcoauto-m14x1-5-lug-nuts-for-tundra-sequoia-20pcs-chrome-mag-seat-closed-end-10-9-steel","title":"SKCOAUTO M14x1.5 Lug Nuts for Tundra Sequoia — 20pcs Chrome Mag-Seat, Closed-End, 10.9 Steel","description":"\u003cp\u003e\u003cstrong\u003eThese are 20 chrome, M14x1.5 mag-seat closed-end lug nuts engineered to replace factory lug nuts on Tundra, Sequoia, Land Cruiser, LX470 and LX570 wheels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSKCOAUTO’s 20-piece lug nut kit provides a direct-fit replacement for many Toyota and Lexus models that use 14x1.5 mag-seat nuts. Each lug nut is a one-piece, heat-treated steel design finished in chrome and salt-spray tested for corrosion resistance. The set is built to match OE dimensions so you can restore wheel security and appearance without modifying wheels or studs.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Tundra or Sequoia stock wheels?\u003c\/h3\u003e\n\n\u003cp\u003eThese lug nuts are specified for vehicles using a 14x1.5 thread pitch with a mag\/flat seat. They match common OE replacements for late-1990s through recent model years of Tundra, Sequoia, Land Cruiser and select Lexus LX models. Always verify your vehicle’s required nut size before purchase.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThread: M14 x 1.5\u003c\/li\u003e\n  \u003cli\u003eHex size: 22 mm\u003c\/li\u003e\n  \u003cli\u003eOverall length: 47 mm; shank length: 12.5 mm\u003c\/li\u003e\n  \u003cli\u003eSeat type: Mag\/Flat seat (not conical)\u003c\/li\u003e\n  \u003cli\u003eClosed-end design compatible with many OE wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these lug nuts?\u003c\/h3\u003e\n\n\u003cp\u003eManufactured from 10.9-grade heat-treated steel, these one-piece lug nuts are built for strength and long service life. They undergo 72-hour salt spray testing to assess corrosion resistance and are finished in chrome to help shield threads and bodies from road conditions. The closed end also reduces moisture and dirt entry for added protection.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial: 10.9-grade heat-treated premium steel\u003c\/li\u003e\n  \u003cli\u003eFinish: chrome plating for improved corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eTesting: 72-hour salt spray corrosion test\u003c\/li\u003e\n  \u003cli\u003eDesign: closed-end body limits contaminants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat OE part numbers and vehicles do these replace?\u003c\/h3\u003e\n\n\u003cp\u003eThis 20-piece kit is cross-referenced to several OEM replacement numbers and fits a range of Toyota and Lexus models that use mag-seat M14x1.5 lug nuts. It’s sold as a complete set for vehicles that require all lug nuts to be replaced or upgraded simultaneously.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCommon OE replacements: 9094201103, 91000371, 90942A1001, 611-277\u003c\/li\u003e\n  \u003cli\u003eCompatible models: Tundra (2007–2021 stock wheels), Sequoia (2008–2021), Land Cruiser (1998–2021), LX470 (1998–2007), LX570 (2008–2021)\u003c\/li\u003e\n  \u003cli\u003ePack size: 20 nuts—enough for most full-wheel replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow confident can I be in performance and warranty?\u003c\/h3\u003e\n\n\u003cp\u003eEach lug nut is produced to strict quality-control standards and sold as 100% new. SKCOAUTO backs the set with a 12-month warranty to cover manufacturing defects, letting you replace nuts with confidence when restoring wheels or performing maintenance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eQuantity: set of 20 lug nuts\u003c\/li\u003e\n  \u003cli\u003eQuality control: built to regulated manufacturing standards\u003c\/li\u003e\n  \u003cli\u003eWarranty: 12 months coverage for defects\u003c\/li\u003e\n  \u003cli\u003eInstallation: torque to vehicle manufacturer specs using 22 mm socket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This SKCOAUTO 20-piece lug nut set is for Toyota and Lexus owners, mechanics, and DIY enthusiasts who need a direct-fit, durable replacement for mag-seat M14x1.5 OE lug nuts. It’s ideal when replacing all wheel nuts at once, restoring appearance with chrome-plated hardware, or ensuring a secure, corrosion-tested option for stock wheels. Before ordering, confirm your vehicle uses M14x1.5 mag-seat lug nuts and the 22 mm hex size to ensure proper fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with conical seat wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These are mag\/flat-seat lug nuts (M14x1.5). They won’t seat properly on conical\/tapered-wheel apertures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size is required to install these nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 22 mm socket and torque to your vehicle manufacturer's wheel lug specification.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67591084802233,"sku":"B0DM8W4KLY","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-packaging-lug-nuts_68747303-71f1-4669-be29-a32c11058fd0.jpg?v=1790540973"},{"product_id":"skcoauto-m14x1-5-lug-nuts-20-pc-chrome-60-acorn-closed-end-7-8-in-22mm-hex","title":"SKCOAUTO M14x1.5 Lug Nuts 20 Pc Chrome — 60° Acorn Closed-End, 7\/8 in (22mm) Hex","description":"\u003cp\u003e\u003cstrong\u003eThese are 20 high-strength, chrome-finish M14x1.5 lug nuts with a 60° acorn seat and closed end, engineered to replace factory wheel nuts on many Ram, Wrangler, Gladiator, and Cherokee models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSKCOAUTO built this lug nut set to match common OE specifications while improving corrosion resistance and tensile strength. Each nut measures 14x1.5 thread pitch, uses a 7\/8\" (22mm) hex, and has a 1.77\" overall length. The closed-end acorn design protects threaded studs from dirt and moisture, and the pieces are crafted from heat-treated 10.9-grade steel with a chrome finish that passed 72-hour salt spray testing.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Ram or Jeep?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are made to replace specific OE part numbers and fit vehicles that use M14x1.5 threads with a 60° acorn seat. Confirm your vehicle’s wheel stud size and seat type before purchasing to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread pitch: M14x1.5\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° acorn\u003c\/li\u003e\n  \u003cli\u003eHex: 7\/8\" (22mm)\u003c\/li\u003e\n  \u003cli\u003eReplace OE numbers: 6509422AA, 6509873AA, 611-330, 611-152\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these lug nuts?\u003c\/h3\u003e\n\u003cp\u003eManufactured from 10.9-grade heat-treated steel, this set emphasizes strength and longevity under road conditions. The chrome finish and a 72-hour salt spray test provide a practical level of rust resistance for most climates and driving environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 10.9-grade heat-treated steel\u003c\/li\u003e\n  \u003cli\u003eFinish: chrome for improved corrosion protection\u003c\/li\u003e\n  \u003cli\u003eTesting: 72-hour salt spray corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eDesign: closed end to keep threads cleaner\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and torque specs do I need to install them safely?\u003c\/h3\u003e\n\u003cp\u003eUse a 7\/8\" (22mm) socket or wrench for installation; avoid impact tools for final torque unless specified by your vehicle’s manufacturer. Always tighten in a star pattern and follow the vehicle maker’s recommended torque value for lug nuts to secure the wheel correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool size required: 7\/8\" (22mm) socket\u003c\/li\u003e\n  \u003cli\u003eTightening pattern: star\/crisscross for multi-lug wheels\u003c\/li\u003e\n  \u003cli\u003eFinalization: use torque wrench to vehicle-specified torque\u003c\/li\u003e\n  \u003cli\u003eTip: avoid overtightening to prevent stud damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what warranty is provided?\u003c\/h3\u003e\n\u003cp\u003eThis listing includes a set of 20 lug nuts, packaged new and ready for direct replacement of factory nuts. SKCOAUTO backs these nuts with a 12-month warranty and inspects production to meet quality-control standards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: 20 lug nuts per set\u003c\/li\u003e\n  \u003cli\u003ePackaging: 100% new components\u003c\/li\u003e\n  \u003cli\u003eWarranty: 12 months from purchase\u003c\/li\u003e\n  \u003cli\u003eQuality: manufactured under strict quality control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This lug nut set is aimed at truck and SUV owners—particularly Ram, Wrangler, Gladiator, and Cherokee drivers—who need a direct-fit, durable replacement that matches OE specifications. It’s also suited for mechanics, fleet managers, and DIYers seeking corrosion-resistant, closed-end lug nuts with proven strength for regular on-road use. Before ordering, verify thread pitch, seat angle, and OE part number compatibility to ensure a correct fit for your wheels.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with my Ram 1500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Ram models using M14x1.5 threads and a 60° acorn seat—confirm your OE part number or wheel stud specs first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts prevent rusting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The chrome finish and 72-hour salt spray testing improve corrosion resistance but do not guarantee complete rust prevention in all environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67591084966073,"sku":"B0DM8ZRC96","price":76.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-packaging-m14x1-5-lug-nuts.jpg?v=1790540974"},{"product_id":"skcoauto-m14x1-5-spline-lug-nuts-24-pc-closed-end-for-6-lug-wheels-xl-spline-socket-key-included","title":"SKCOAUTO M14x1.5 Spline Lug Nuts 24 Pc Closed-End for 6-Lug Wheels — XL Spline, Socket Key Included","description":"\u003cp\u003e\u003cstrong\u003eSKCOAUTO M14x1.5 spline lug nuts are a set of 24 closed-end, XL spline-style wheel nuts with a matching socket key designed for 6-lug aftermarket aluminum wheels that use a 60° conical seat.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are engineered for vehicles that require 14mm x 1.5 thread pitch and a 60° conical (tapered) seating angle. The one-piece solid construction avoids the corrosion and failure points of two-piece capped designs, and the closed-end bodies help protect wheel studs from contaminants. This package includes 24 lug nuts and one dedicated spline socket key for installation and removal.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these lug nuts fit my wheels and studs?\u003c\/h3\u003e\n\u003cp\u003eThey are intended specifically for wheels and vehicles that use an M14 x 1.5 stud with a 60° conical seat. They will not work with wheels that require mag, ball, or round seating types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMating thread: 14mm x 1.5 pitch\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical (taper)\u003c\/li\u003e\n  \u003cli\u003eCompatible wheel bolt pattern: designed for 6-lug aftermarket aluminum wheels\u003c\/li\u003e\n  \u003cli\u003eNot compatible with mag seat, ball seat or round seat wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical specifications and design benefits?\u003c\/h3\u003e\n\u003cp\u003eEach nut is an XL spline tuner style, closed-end, duplex design finished and measured for consistent fit. The solid one-piece body improves durability compared with two-piece capped nuts and resists internal rusting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTotal length: 2.01 inches (approx.)\u003c\/li\u003e\n  \u003cli\u003eWidth across flats: 0.90 inches (approx.)\u003c\/li\u003e\n  \u003cli\u003eQuantity: 24 lug nuts + 1 socket key\u003c\/li\u003e\n  \u003cli\u003eClosed-end construction protects studs from dirt and moisture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and remove these spline lug nuts?\u003c\/h3\u003e\n\u003cp\u003eUse the included spline socket key with a torque wrench or breaker bar sized for the key. Tighten to your vehicle manufacturer’s wheel torque specification and check torque after initial driving miles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the provided socket key for engagement with the spline pattern\u003c\/li\u003e\n  \u003cli\u003eApply manufacturer torque spec — do not overtighten\u003c\/li\u003e\n  \u003cli\u003eRecheck torque after 50–100 miles or after wheel service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and warranty protections are included?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are manufactured to resist corrosion and are tested for environmental exposure. The one-piece solid design reduces rust pathways compared with multi-piece caps, and the product is covered by a limited 12-month warranty.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSalt spray tested for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSolid, single-piece construction for improved longevity\u003c\/li\u003e\n  \u003cli\u003e12-month warranty from SKCOAUTO against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These M14x1.5 spline lug nuts suit vehicle owners upgrading to or maintaining 6-lug aftermarket aluminum wheels that require a 60° conical seat and 14x1.5 thread. They’re a fit for tuners, daily drivers, and anyone who prefers closed-end spline nuts for cleaner wheel stud protection and a strong single-piece design. If your wheels require mag, ball or round seats, choose a lug nut specified for those seating types instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these fit my 6-lug aluminum wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your wheels and studs use M14 x 1.5 threads and a 60° conical seat, yes. They won’t fit mag, ball, or round seats.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is a special tool needed to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this set includes a matching spline socket key; use a torque wrench to tighten to your vehicle spec.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67591087882425,"sku":"B0DMR5N97G","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-packaging-m14x1-5-spline-lug-nuts.jpg?v=1790541057"},{"product_id":"skcoauto-7-16-20-lug-nuts-20-piece-set-for-corvette-60-tapered-seat-chrome-10-9-steel","title":"SKCOAUTO 7\/16-20 Lug Nuts 20-Piece Set for Corvette — 60° Tapered Seat, Chrome 10.9 Steel","description":"\u003cstrong\u003eThese are SKCOAUTO 7\/16-20 lug nuts — a 20-piece set of cold-forged, 10.9-grade steel, 60° tapered-seat lug nuts sized for classic Corvettes and other compatible GM models.\u003c\/strong\u003e\n\n\u003cp\u003eIf you need replacement lug nuts for older GM and Corvette wheels that require a 7\/16-20 thread and a 60° tapered seat, this SKCOAUTO set supplies a full complement of 20 solid, one-piece nuts machined to OEM-style specs. They are heat-treated SCM steel, cold-forged for strength, finished in a three-layer chrome plating for extended corrosion resistance, and factory-tested for fit. Before buying, confirm your wheel seat angle and the 0.87\" flange limit to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these lug nuts fit my classic Corvette or GM car?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are made to match wheels that accept a 7\/16-20 thread with a 60° tapered seat, the common configuration on many vintage GM vehicles. The physical dimensions — 3\/4\" hex, 1.38\" length, and 0.87\" width — are designed to work within the wheel flange limits specified by the manufacturer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: 7\/16-20, standard coarse thread for older GM hubs.\u003c\/li\u003e\n  \u003cli\u003eSeat: 60° tapered conical seat — not compatible with 90° mag, flat, ball, or radius seats.\u003c\/li\u003e\n  \u003cli\u003eDimensions: 3\/4\" hex, 1.38\" overall length, 0.87\" width flange limit.\u003c\/li\u003e\n  \u003cli\u003eFitment examples: vintage Corvettes (1962–1980) and other listed GM models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protections do these lug nuts use for longevity?\u003c\/h3\u003e\n\u003cp\u003eSKCOAUTO manufactures these lug nuts from SCM alloy steel and heat-treats them to a 10.9 grade for improved tensile strength and durability under wheel loads. A three-layer chrome finish plus a 72-hour ASTM B117 salt-spray rating helps resist rust and corrosion from road salt, humidity, and seasonal chemicals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: SCM cold-forged steel, heat-treated to grade 10.9.\u003c\/li\u003e\n  \u003cli\u003eFinish: triple-layer chrome for visual appeal and corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eTesting: 72-hour salt-spray certification for environmental durability.\u003c\/li\u003e\n  \u003cli\u003eConstruction: solid one-piece design for reliable torque performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there installation or compatibility cautions I should know?\u003c\/h3\u003e\n\u003cp\u003eYes — these lug nuts only fit wheels with a 60° tapered seat and a maximum 0.87\" flange opening, and they are not suitable for wheels with caps or alternative seat profiles. Always verify your vehicle manual or measure the wheel seat before installing to avoid mismatches that can damage wheels or studs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not use on 90° mag, flat, ball, or radius seat wheels.\u003c\/li\u003e\n  \u003cli\u003eNot designed to accept wheel caps; check for cap clearance.\u003c\/li\u003e\n  \u003cli\u003eConfirm flange limit of 0.87\" to prevent improper seating.\u003c\/li\u003e\n  \u003cli\u003eTorque to manufacturer specs using a calibrated wrench to secure fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This SKCOAUTO 20-piece set is aimed at owners and restorers of classic Corvettes and compatible GM models that require 7\/16-20 threaded, 60° tapered-seat lug nuts. It also suits mechanics and hobbyists who want a durable, corrosion-resistant replacement that matches OEM-style dimensions. If your wheels or hub use a different seat angle or require caps, choose a correct variant instead. The set includes a 12-month after-sales service for quantity or quality issues — contact SKCOAUTO for support.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit Corvette wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your Corvette requires 7\/16-20 threads and a 60° tapered seat and your wheel flange limit is 0.87\", these will fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts corrosion-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are 10.9-grade SCM steel with triple-layer chrome and a 72-hour salt-spray rating for enhanced corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67591120978105,"sku":"B0FRRL1L3Q","price":76.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-view-lug-nuts-packaging.jpg?v=1790541720"},{"product_id":"skcoauto-m14x1-5-lug-nuts-20pc-for-camaro-corvette-chrome-closed-end-60-conical-seat","title":"SKCOAUTO M14x1.5 Lug Nuts 20pc for Camaro \u0026 Corvette — Chrome Closed-End, 60° Conical Seat","description":"\u003cp\u003e\u003cstrong\u003eThese are SKCOAUTO M14x1.5 20-piece solid acorn lug nuts made for Camaro, Corvette and similar GM stock wheels—chrome finish, closed-end, 60° conical seat, 1.5\" overall length.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a reliable replacement wheel fastener set for GM vehicles that use 14x1.5 threads, this SKCOAUTO kit supplies twenty solid, heat-treated lug nuts designed to match factory-style acorn seating and wheel clearances. The set aims to give a corrosion-resistant chrome appearance while using a one-piece design built for strength and long-term fitment on compatible stock wheels.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Camaro or Corvette?\u003c\/h3\u003e\n\u003cp\u003eFit depends on your car's wheel stud thread pitch and seat type. These nuts are M14x1.5 with a 60° conical seat and are intended for stock-style wheels on many Camaro, Corvette, Impala and Malibu models that use 14x1.5 hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: 14x1.5 (metric)\u003c\/li\u003e\n  \u003cli\u003eSeat angle: 60° conical (acorn \/ tapered)\u003c\/li\u003e\n  \u003cli\u003eOverall length: 1.5\" (38mm)\u003c\/li\u003e\n  \u003cli\u003eHex size: 7\/8\" (22mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow strong and durable are these lug nuts?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are manufactured from 10.9-grade heat-treated steel to improve tensile strength and wear resistance compared with lower-grade fasteners. A one-piece solid construction reduces corrosion points compared with two-piece capped designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 10.9-grade heat-treated steel\u003c\/li\u003e\n  \u003cli\u003eDesign: solid one-piece, closed-end body\u003c\/li\u003e\n  \u003cli\u003eCorrosion test: 72-hour salt spray screening\u003c\/li\u003e\n  \u003cli\u003eFinish: chrome plating for appearance and rust resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation details and tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward with the correct wrench or socket and proper torque. Use a 7\/8\" (22mm) socket and follow your vehicle manufacturer’s torque specification to secure the lug nuts safely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequired socket: 7\/8\" (22mm) hex\u003c\/li\u003e\n  \u003cli\u003eTorque: follow vehicle OEM specifications\u003c\/li\u003e\n  \u003cli\u003eSeat type: ensure wheel uses 60° conical seating\u003c\/li\u003e\n  \u003cli\u003eQuantity: set includes 20 lug nuts—enough for 4 wheels plus spares\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances come with the set?\u003c\/h3\u003e\n\u003cp\u003eSKCOAUTO backs these lug nuts with a 12-month warranty and implements strict quality control during production. Each unit is new and inspected to meet dimensional and plating standards before shipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWarranty: 12 months\u003c\/li\u003e\n  \u003cli\u003eInspection: dimensional and finish checks\u003c\/li\u003e\n  \u003cli\u003ePackaging: set of 20, new condition\u003c\/li\u003e\n  \u003cli\u003eRecommendation: confirm thread and seat compatibility before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 20-piece SKCOAUTO lug nut set is intended for owners or mechanics of Camaro, Corvette and other GM models that require M14x1.5, 60° conical-seat fasteners and who prefer a chrome, closed-end, solid design for durability and a clean finished look. Choose this kit if you need full-wheel coverage plus spares, want a stronger one-piece nut instead of capped designs, and can verify the thread pitch and seat match your wheels.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with aftermarket wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit wheels that accept M14x1.5 threads and a 60° conical seat. Verify your wheel seat type before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What torque should I use for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use the torque spec recommended by your vehicle manufacturer; do not rely on a generic value.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67591135461561,"sku":"B0DPW57SQM","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-view-chrome-packaging.jpg?v=1790542134"},{"product_id":"skcoauto-m14x1-5-lug-nuts-24-piece-set-for-silverado-tahoe-suburban-chrome-60-acorn-7-8-hex","title":"SKCOAUTO M14x1.5 Lug Nuts 24-Piece Set for Silverado Tahoe Suburban — Chrome, 60° Acorn, 7\/8\" Hex","description":"\u003cp\u003e\u003cstrong\u003eThese SKCOAUTO 24-piece M14x1.5 lug nuts are chrome-finish, 60° acorn-seat, closed-end wheel nuts engineered as direct-fit replacements for Silverado, Tahoe, Suburban, Colorado and select GM\/GM luxury models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your factory lug nuts are stripped, corroded or missing, this full set of 24 lug nuts provides an immediate, secure replacement. Manufactured from heat-treated 10.9-grade steel and finished in chrome, they pair OE-style dimensions with extended corrosion resistance. The kit is designed to match M14x1.5 thread pitch, a 7\/8\" (22mm) hex fit, and a 1.77\" overall length for proper engagement and wheel clearance on compatible vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my Silverado, Tahoe or Suburban?\u003c\/h3\u003e\n\u003cp\u003eYes — these nuts are made to replace common GM OE part numbers and match the M14x1.5 specifications used on many Silverado, Tahoe, Suburban, Colorado and select Cadillac models. Check your vehicle’s lug nut thread pitch and seat angle before purchase to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread pitch: M14 x 1.5\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° acorn (conical)\u003c\/li\u003e\n  \u003cli\u003eHex size: 7\/8\" (22mm)\u003c\/li\u003e\n  \u003cli\u003eOverall length: 1.77\" (closed-end)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and corrosion-resistant are these lug nuts?\u003c\/h3\u003e\n\u003cp\u003eSKCOAUTO builds these lug nuts from heat-treated 10.9-grade steel for higher tensile strength and improved wear resistance over lower-grade alternatives. The chrome finish and a 72-hour salt spray test indicate enhanced protection against rust and environmental wear for prolonged service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 10.9-grade heat-treated steel\u003c\/li\u003e\n  \u003cli\u003eFinish: chrome plating for rust resistance\u003c\/li\u003e\n  \u003cli\u003eSalt spray tested: 72 hours\u003c\/li\u003e\n  \u003cli\u003eDesign: closed-end to keep out dirt and moisture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation or tool details should I know?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward with a 7\/8\" (22mm) socket or wrench and a calibrated torque wrench for safe wheel fastening. Closed-end acorn design maintains wheel aesthetics while preventing debris entry; use the correct torque spec from your vehicle manufacturer to avoid thread damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequired tool: 7\/8\" (22mm) socket or wrench\u003c\/li\u003e\n  \u003cli\u003eTorque: follow vehicle manufacturer torque settings\u003c\/li\u003e\n  \u003cli\u003eQuantity: set of 24 lug nuts — ideal for trucks and full-size SUVs\u003c\/li\u003e\n  \u003cli\u003eDesign note: closed-end prevents moisture and grit intrusion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these replace original equipment part numbers?\u003c\/h3\u003e\n\u003cp\u003eThis 24-piece set is intended as direct replacements for a long list of OE numbers used across GM platforms. If your OE part number appears in the provided replacement list, these nuts will match the factory specifications and mounting profile.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon replacements: 6509422AA, 6509873AA, 6507826AA\u003c\/li\u003e\n  \u003cli\u003eAlso replaces multiple 611- and 959- series OE numbers\u003c\/li\u003e\n  \u003cli\u003eSold as a complete 24-piece set for full wheel refits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This SKCOAUTO 24-piece lug nut set is aimed at owners and technicians working on full-size GM trucks and SUVs who need a reliable, OEM-dimension replacement. It suits do-it-yourselfers replacing worn or missing lug nuts, fleet managers standardizing maintenance parts, and shops performing wheel and tire service that requires durable, corrosion-resistant hardware. Before ordering, verify thread pitch and seat type against your vehicle specs to ensure a correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts compatible with my 2015 Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your Silverado uses M14x1.5 threads and a 60° acorn seat, these will fit. Verify wheel thread pitch and seat type first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket size do I need for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 7\/8\" (22mm) socket or wrench and torque to the vehicle manufacturer's specification.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67591169474745,"sku":"B0DM8XX8TL","price":79.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-lug-nuts-front-packaging_b835e2b1-aa94-47c4-903a-60be244e0225.jpg?v=1790543038"},{"product_id":"skcoauto-m14x2-0-spline-lug-nuts-24pc-for-f-150-expedition-closed-end-xl-spline-60-conical-seat","title":"SKCOAUTO M14x2.0 Spline Lug Nuts 24pc for F-150\/Expedition — Closed-End XL Spline, 60° Conical Seat","description":"\u003cp\u003e\u003cstrong\u003eSKCOAUTO M14x2.0 24-piece XL spline lug nuts are solid, closed-end tuner-style nuts engineered for aftermarket aluminum wheels on 2004–2014 F-150s, 2003–2014 Expedition and Navigator models that require a 60° conical seat.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are a one-piece, duplex XL spline design made to replace two-piece or capped factory nuts. With a closed end to keep out moisture and contaminants plus a 72-hour salt spray test history, they aim to reduce corrosion and seizing on trucks that use aftermarket aluminum wheels. Each set includes 24 nuts sized M14x2.0 with a total length near 1.97 inches and a width of 0.9 inch.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my F-150 or Expedition with aftermarket wheels?\u003c\/h3\u003e\n\u003cp\u003eIf your vehicle uses aftermarket aluminum wheels that require M14x2.0 threads and a 60° conical seat, these nuts are designed to fit. They do not fit original factory wheels that need different seat types or thread sizes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible vehicles listed: 2004–2014 Ford F-150, 2003–2014 Expedition and Navigator when paired with aftermarket wheels\u003c\/li\u003e\n  \u003cli\u003eThread size: 14mm x 2.0 pitch\u003c\/li\u003e\n  \u003cli\u003eSeat type: 60° conical (not for ball-seat or flat-seat wheels)\u003c\/li\u003e\n  \u003cli\u003eQuantity: 24 nuts per kit for full sets or multi-wheel applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these lug nuts constructed compared with factory two-piece nuts?\u003c\/h3\u003e\n\u003cp\u003eThese SKCOAUTO lug nuts are manufactured as one solid piece rather than a two-piece or capped design. The solid construction removes a common failure point and helps prevent rust and difficult repairs associated with separated caps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-piece solid body for improved durability over capped two-piece designs\u003c\/li\u003e\n  \u003cli\u003eClosed-end design prevents water and debris intrusion into the threads\u003c\/li\u003e\n  \u003cli\u003eTested for corrosion resistance with 72 hours of salt spray testing\u003c\/li\u003e\n  \u003cli\u003eDuplex XL spline tuner style for secure wheel attachment and style\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and technical details I should know?\u003c\/h3\u003e\n\u003cp\u003eEach nut features M14x2.0 threading and measures approximately 1.97 inches long with a 0.9-inch width. They have a 60-degree conical seat and a closed end, which together define compatibility and intended use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread: M14 x 2.0\u003c\/li\u003e\n  \u003cli\u003eTotal length: about 1.97 inches; width: 0.9 inch\u003c\/li\u003e\n  \u003cli\u003eStyle: Closed-end XL spline tuner lug nuts with duplex configuration\u003c\/li\u003e\n  \u003cli\u003eSeat angle: 60° conical seat for compatible aftermarket wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and quality assurances come with the lug nuts?\u003c\/h3\u003e\n\u003cp\u003eThe nuts are produced under defined quality-control standards and are supplied new. SKCOAUTO backs them with a 12-month warranty to cover manufacturing defects and to give buyers added confidence.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty from SKCOAUTO\u003c\/li\u003e\n  \u003cli\u003e100% new components, not remanufactured or used\u003c\/li\u003e\n  \u003cli\u003eManufactured to consistent quality-control procedures\u003c\/li\u003e\n  \u003cli\u003eCorrosion resistance validated through salt spray testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this set is for: If you own a 2004–2014 Ford F-150 or a 2003–2014 Expedition\/Navigator and have installed aftermarket aluminum wheels requiring M14x2.0 threads and a 60° conical seat, this 24-piece SKCOAUTO kit is made to provide a durable, closed-end replacement option. It appeals to owners seeking a robust one-piece design to reduce corrosion and simplify maintenance, and to anyone building or upgrading tuner-style wheels who needs extra nuts for multiple wheels or spares.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit factory Ford wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They are made for aftermarket aluminum wheels requiring M14x2.0 threads and a 60° conical seat, not for standard factory wheel seat types.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools do I need to install these XL spline lug nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use the recommended spline socket size for XL spline tuner nuts and a torque wrench to tighten to the wheel manufacturer's specified torque.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67591201882297,"sku":"B0DMR9PC2B","price":76.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-view-lug-nuts.jpg?v=1790543617"},{"product_id":"skcoauto-m14x1-5-lug-nuts-20-pack-chrome-60-acorn-seat-7-8-hex-closed-end","title":"SKCOAUTO M14x1.5 Lug Nuts 20-Pack — Chrome 60° Acorn Seat, 7\/8\" Hex, Closed-End","description":"\u003cp\u003e\u003cstrong\u003eThese are 20 chrome-plated M14x1.5 lug nuts made by SKCOAUTO, designed to replace OE lug nuts on compatible Lincoln and Ford models with a 60° acorn seat and closed end.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese lug nuts are a one-piece, heat-treated solution intended for wheel fastening where M14x1.5 threads and a 7\/8\" (22mm) hex are specified. Each nut measures 1.5\" (38.1mm) overall and features a 60-degree acorn seat for proper wheel taper engagement. The set is finished with a triple nickel-chrome coating to resist corrosion and match vehicle aesthetics. They are sold in a pack of 20 to cover full wheel sets and spares.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lug nuts fit my 2015–2020 Lincoln MKX or compatible Ford models?\u003c\/h3\u003e\n\n\u003cp\u003eIf your vehicle specifies M14x1.5 thread pitch with a 60° acorn seat and uses a 7\/8\" (22mm) hex lug, these will fit as direct replacements. They were designed to match OE seat angle and length so wheel contact and thread engagement mirror factory geometry.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eM14x1.5 thread pitch—matches common late-model Lincoln\/Ford specifications\u003c\/li\u003e\n  \u003cli\u003e60° acorn seat—ensures correct taper interface with wheels\u003c\/li\u003e\n  \u003cli\u003e7\/8\" (22mm) hex—works with standard lug sockets and torque tools\u003c\/li\u003e\n  \u003cli\u003e1.5\" (38.1mm) overall length—suitable for OEM wheel depth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow strong and durable are these lug nuts compared to factory parts?\u003c\/h3\u003e\n\n\u003cp\u003eConstructed from 10.9-grade heat-treated steel, these lug nuts are engineered for improved tensile strength and wear resistance compared with lower-grade fasteners. The triple-layer nickel and chrome finish improves corrosion resistance and provides a long-lasting visual match to factory chrome hardware.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e10.9-grade steel—higher hardness and strength than mild steels\u003c\/li\u003e\n  \u003cli\u003eHeat-treated—enhanced fatigue resistance for repeated torqueing\u003c\/li\u003e\n  \u003cli\u003eTriple nickel-chrome plating—better protection against rust and road salts\u003c\/li\u003e\n  \u003cli\u003eClosed-end design—keeps out moisture and debris for extended life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and torque settings should I use with these lug nuts?\u003c\/h3\u003e\n\n\u003cp\u003eUse a 7\/8\" (22mm) socket to install or remove these lug nuts. Always follow the vehicle manufacturer’s recommended torque specification and tightening sequence to ensure safe wheel retention and even clamping force.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSocket size: 7\/8\" (22mm) standard impact or hand socket\u003c\/li\u003e\n  \u003cli\u003eTorque: follow your vehicle’s wheel nut torque specification (see owner manual)\u003c\/li\u003e\n  \u003cli\u003eTightening pattern: use the correct star pattern for multi-lug wheels\u003c\/li\u003e\n  \u003cli\u003eClosed end: may require longer sockets for some aftermarket wheel studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these lug nuts a direct OE replacement and what numbers do they replace?\u003c\/h3\u003e\n\n\u003cp\u003eThese nuts are offered as compatible replacements for specific OE part numbers and were made to function as direct substitutes in models that use the same thread, seat, and hex specifications. They are intended to match the fitment and appearance expected of factory lug hardware.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplace OE numbers including 611007, ACPZ1012D, ACPZ1012M\u003c\/li\u003e\n  \u003cli\u003eSold as a 20-piece set—covers most wheel sets and spares\u003c\/li\u003e\n  \u003cli\u003eOne-piece solid construction—simpler and often more durable than multi-piece designs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This lug nut set is best for owners of compatible Lincoln and Ford vehicles (including 2015–2020 MKX, Edge, MKZ, and Aviator where M14x1.5 60° acorn seat lug nuts are specified) who want a durable, corrosion-resistant replacement with OE-style fit. It’s also suitable for mechanics, fleet managers, or DIYers who need a full 20-piece set for regular wheel maintenance or replacement. SKCOAUTO backs these lug nuts with a 30-day no-reason return window and a 12-month warranty for added purchase confidence.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit Lincoln MKX 2017?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your 2017 MKX uses M14x1.5 threads with a 60° acorn seat and 7\/8\" (22mm) hex—these match those specs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use an impact wrench to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, use a compatible 22mm impact socket but finish tightening to the vehicle torque spec with a torque wrench.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67591208337593,"sku":"B0DM8X9V1Q","price":72.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-packaging-lug-nuts_7dcaa24d-38ab-4dd6-9a82-92054be2fef2.jpg?v=1790543757"},{"product_id":"skcoauto-m12-1-25-wheel-locks-5-locks-2-keys-cone-seat-fit-cold-forged-carbon-steel-with-triple-chrome","title":"SKCOAUTO M12×1.25 Wheel Locks 5 Locks \u0026 2 Keys — Cone-Seat Fit, Cold-Forged Carbon Steel with Triple Chrome","description":"\u003cp\u003e\u003cstrong\u003eSKCOAUTO M12×1.25 wheel locks are a five-lock set with two matching keys designed to secure alloy wheels with a cone seat, made from cold-forged carbon steel with triple chrome plating for corrosion resistance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese wheel locks are built to replace standard lug nuts with tamper-resistant fasteners that match vehicles using an M12×1.25 thread pitch. The package contains five specialized lock nuts and two unique keys so you can protect each wheel and retain a spare key. Designed with dual hex sizes for tool compatibility and a conical seat geometry, these locks are intended for short-stud alloy wheels commonly found on many Japanese and European models. Please confirm fitment—they only fit M12×1.25 applications and conical-seat lug configurations.\u003c\/p\u003e\n\n\u003ch3\u003eWill these wheel locks fit my vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eThese locks fit wheels that use M12×1.25 thread lug nuts with a conical (cone) seating profile and short stud length. They are commonly compatible with models like Q50, Q70, G37, 370Z, 350Z, Sentra, WRX, Outback, Legacy, BRZ and many Pathfinders from 1989–2016, but not all cars with M12×1.25 will match.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOnly for M12×1.25 thread pitch vehicles.\u003c\/li\u003e\n  \u003cli\u003eRequire conical-seat lug mounting—measure your existing nuts first.\u003c\/li\u003e\n  \u003cli\u003eUse the vehicle fitment tool before ordering for exact compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these wheel locks improve theft protection?\u003c\/h3\u003e\n\n\u003cp\u003eThe locks use a proprietary socket pattern that prevents standard sockets from removing them, adding a physical barrier to opportunistic theft. Because each lock requires a matching key, wheel removal without that key becomes difficult and time-consuming for thieves.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUnique anti-theft socket pattern resists common tools.\u003c\/li\u003e\n  \u003cli\u003eFive lock nuts secure each wheel, two keys included for access and backup.\u003c\/li\u003e\n  \u003cli\u003eDurable construction maintains integrity under repeated use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finishes are used, and will they last outdoors?\u003c\/h3\u003e\n\n\u003cp\u003eThese wheel locks are cold-forged from carbon steel and finished with triple chrome plating to resist rust and maintain appearance. The combination of forging strength and multi-layer plating provides good wear resistance under road conditions when cared for properly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCold-forged carbon steel core for strength and fatigue resistance.\u003c\/li\u003e\n  \u003cli\u003eTriple chrome plating for enhanced anti-corrosion protection.\u003c\/li\u003e\n  \u003cli\u003eDual hex design (19mm \u0026amp; 21mm) for flexibility with common tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are required?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward—remove one factory lug nut at a time and replace with the supplied lock using a standard torque wrench or breaker bar with the appropriate hex. The dual hex feature supports either 19mm or 21mm sockets, so most basic toolkits will work. Always torque to the vehicle manufacturer's specifications and use a wheel lock key adapter supplied with the set.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplace one nut per wheel; keep the spare key in a safe place.\u003c\/li\u003e\n  \u003cli\u003eUse a 19mm or 21mm socket and torque to factory spec.\u003c\/li\u003e\n  \u003cli\u003eNo special wheel modifications required if seat type and thread match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who want a robust, replacement-style wheel lock for vehicles using M12×1.25 conical-seat lug nuts. Ideal for owners of compact and mid-size sedans, sports coupes, and some SUVs where the wheel studs are short and the factory lug nuts are cone-seat. Confirm thread pitch and seat geometry before purchase; choose this set if you need a durable, plated steel lock with dual-hex tool compatibility and two keys for convenience.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these locks fit my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit only M12×1.25 thread pitch with conical seat lug nuts. Verify using the vehicle fitment tool before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools are needed to install them?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use a 19mm or 21mm socket and a torque wrench or breaker bar; follow your vehicle’s torque specs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67591231733945,"sku":"B0F83XN6YY","price":69.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-front-view-wheel-locks-packaging.jpg?v=1790544562"},{"product_id":"skcoauto-oil-filter-wrench-and-replacement-filter-kit-04152-yzza1-toyota-lexus-fit-oem-style-seal","title":"SKCOAUTO Oil Filter Wrench and Replacement Filter Kit 04152-YZZA1 — Toyota\/Lexus Fit, OEM-Style Seal","description":"\u003cp\u003e\u003cstrong\u003eSKCOAUTO 04152-YZZA1 Oil Filter Wrench with Oil Filter Change Kit is a complete replacement kit designed to remove and replace factory-style oil filters for compatible Toyota and Lexus models quickly and cleanly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit pairs a precision-fit oil filter wrench with a high-quality replacement oil filter built to the original part number 04152-YZZA1. It’s engineered to match OEM dimensions and filtration performance so you can service RAV4, Sienna, Tacoma, Avalon, Venza, and RX350 vehicles without hassle. The package emphasizes durability and filtration accuracy, and SKCOAUTO backs it with a one-year warranty for added peace of mind.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit simplify an oil filter change?\u003c\/h3\u003e\n\u003cp\u003eThe included wrench is shaped to engage the factory-style canister filter securely, reducing slippage and frustration during removal. The filter itself installs like the original, minimizing the need for adapters or extra tools. Together they cut service time and make messy oil changes neater.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool designed to match factory filter dimensions for easy grip and removal\u003c\/li\u003e\n  \u003cli\u003eFilter installs with standard thread and seal for fast replacement\u003c\/li\u003e\n  \u003cli\u003eCompact kit reduces spills and speeds up routine maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and part numbers does this replace?\u003c\/h3\u003e\n\u003cp\u003eThis SKCOAUTO kit is intended as a direct-fit replacement for part number 04152-YZZA1 and fits a range of Toyota and Lexus models that use that spec. Double-check compatibility with your specific model year and engine variant before buying to ensure correct fitment. The product listing notes common compatible models to help narrow the match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM part number 04152-YZZA1\u003c\/li\u003e\n  \u003cli\u003eCommon fits: RAV4, Sienna, Tacoma, Avalon, Venza, RX350\u003c\/li\u003e\n  \u003cli\u003eVerify model year and engine type for exact compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the filter’s construction and performance features?\u003c\/h3\u003e\n\u003cp\u003eThe replacement element uses media engineered for higher filtration accuracy compared with generic replacements, helping trap contaminants before they circulate through the engine. The canister and sealing surfaces are manufactured to meet or exceed original factory tolerances for a reliable seal and long-lasting performance. These features combine to support consistent oil flow and capture particulates during operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-accuracy filtration media to capture fine contaminants\u003c\/li\u003e\n  \u003cli\u003eDurable canister and seal made to OEM specifications\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet or exceed factory standards for reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support are included?\u003c\/h3\u003e\n\u003cp\u003eSKCOAUTO provides a one-year warranty on this oil filter change kit, covering defects in materials and workmanship under normal use. Customer support is available for fitment questions and post-purchase assistance. The warranty gives added confidence if you encounter fitment or performance concerns within the coverage period.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-year limited warranty for parts and manufacturing defects\u003c\/li\u003e\n  \u003cli\u003eDedicated customer support for fitment and product questions\u003c\/li\u003e\n  \u003cli\u003eInstructions and packaging intended for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This kit is ideal for DIY owners and independent technicians who service Toyota and Lexus vehicles that specify part 04152-YZZA1 and want a direct-fit replacement without adapting nonstandard parts. It also suits fleet managers or enthusiasts who prioritize OEM-equivalent fit, reliable filtration, and a simple wrench solution to speed routine maintenance. If you need an OEM-dimension filter plus a dedicated removal tool to handle factory-style canister filters, this SKCOAUTO kit is built for that purpose.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this replace my 04152-YZZA1 factory filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This SKCOAUTO kit is designed as a direct replacement for part number 04152-YZZA1 when matched to the correct model and year.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. SKCOAUTO provides a one-year warranty covering manufacturing defects under normal use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67591549223097,"sku":"B0F7QTNGC3","price":62.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-oil-filter-wrench-front-packaging.jpg?v=1790555015"},{"product_id":"skcoauto-split-cv-boot-128mm-tall-silicone-wear-resistant-tongue-and-groove-trim-to-fit-easy-install-gaiter","title":"SKCOAUTO Split CV Boot 128mm Tall — Silicone Wear-Resistant Tongue-and-Groove, Trim-to-Fit Easy-Install Gaiter","description":"\u003cstrong\u003eSKCOAUTO CVS18 is a 128mm-tall split CV boot made from elastic, wear-resistant silicone that simplifies CV joint protection and replacement.\u003c\/strong\u003e\n\nThe CVS18 split constant velocity (CV) boot from SKCOAUTO is a full-length tongue-and-groove gaiter designed to replace worn or torn CV boots on a wide range of vehicles. Engineered for straightforward installation and durable daily use, this universal-style boot can be trimmed to fit specific shafts and helps keep grease in while keeping dirt and debris out. It meets or exceeds typical OEM expectations for flexibility and tear resistance and is backed by a one-year warranty.\n\n\u003ch3\u003eHow does the split tongue-and-groove design make installation easier?\u003c\/h3\u003e\n\u003cp\u003eThe CVS18 uses a continuous split with a tongue-and-groove seam so you can install it without removing the CV axle from many vehicles. The split locks securely when closed, reducing installation time and the need for advanced tools. Follow manufacturer sizing guidance to ensure a correct snug fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-length split allows installation around the shaft.\u003c\/li\u003e\n  \u003cli\u003eTongue-and-groove seam creates a reliable mechanical closure.\u003c\/li\u003e\n  \u003cli\u003eSimplified fit works with common clamp types.\u003c\/li\u003e\n  \u003cli\u003eRecommended use with protective gloves during fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this CV boot fit my vehicle and can I customize the size?\u003c\/h3\u003e\n\u003cp\u003eThe CVS18 is designed for broad compatibility and fits most common CV joint shafts, but it is important to measure before ordering. The 128mm height is a starting point; the material can be trimmed to match shorter applications. Always confirm both inner and outer diameters of your strict CV boot requirement before cutting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal-style fit for many cars and light trucks.\u003c\/li\u003e\n  \u003cli\u003eTrim-to-size silicone allows custom length adjustments.\u003c\/li\u003e\n  \u003cli\u003eCheck shaft diameters and boot height prior to installation.\u003c\/li\u003e\n  \u003cli\u003eClear dimensional verification reduces risk of incompatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat material properties and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eMade from elastic silicone, the CVS18 resists common automotive wear like abrasion, tearing and environmental impacts. The silicone compound maintains flexibility across temperature swings, helping preserve grease seals and extend the life of the joint cage. While durable, routine inspection and proper installation are still recommended to avoid premature failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eElastic silicone resists tears and aging better than some rubbers.\u003c\/li\u003e\n  \u003cli\u003eDesigned to block dirt, water and contaminants from the joint.\u003c\/li\u003e\n  \u003cli\u003eMaintains flexibility in varied operating temperatures.\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet or exceed usual OEM requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and warranty come with the CVS18 split CV boot?\u003c\/h3\u003e\n\u003cp\u003eSKCOAUTO provides a one-year warranty and responsive customer support to address fitment or product concerns. If you encounter sizing questions or installation issues, contact SKCOAUTO for guidance. The warranty covers manufacturing defects under normal use—keep purchase documentation for claims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-year limited warranty included.\u003c\/li\u003e\n  \u003cli support available for fitment guidance.\u003e\n  \u003c\/li\u003e\n\u003cli\u003eKeep proof of purchase for warranty requests.\u003c\/li\u003e\n  \u003cli\u003eSimple replacement process if a defect is confirmed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nThe SKCOAUTO CVS18 128mm split CV boot is geared toward DIY mechanics, professional technicians and fleet managers who need a durable, easy-to-install gaiter that can be trimmed for many applications. It’s ideal when you want to avoid full axle removal, replace a damaged boot quickly, or outfit multiple vehicle makes with a single, adaptable part. Verify measurements before ordering to ensure the best outcome.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I trim the CVS18 boot to fit a shorter shaft?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The elastic silicone can be cut to length—confirm shaft diameters and desired height before trimming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this split boot require axle removal to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Often no. The full-length split design allows installation without removing the axle in many vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67591920451769,"sku":"B0FHZFFSQY","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-cvs18-front-view-packaging.jpg?v=1790560089"},{"product_id":"skcoauto-m12x1-5-lug-nuts-20pcs-chrome-closed-end-60-cone-seat-for-ford","title":"SKCOAUTO M12x1.5 Lug Nuts 20pcs Chrome — Closed-End, 60° Cone Seat for Ford","description":"\u003cp\u003e\u003cstrong\u003eThese are 20 chrome M12x1.5 closed-end cone-seat lug nuts from SKCOAUTO engineered as direct-fit replacements for many Ford models including Escape (2001–2019).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're replacing lost or damaged wheel fasteners or upgrading to a full set for maintenance, these lug nuts offer a one-piece, heat-treated steel construction and a closed-end design to protect studs from dirt and corrosion. They match the 12x1.5 thread pitch and 60° cone seat used on many Ford vehicles and arrive as a set of twenty to cover full-wheel swaps and spares.\u003c\/p\u003e\n\n\u003ch3\u003eWill these fit my Ford Escape or other Ford vehicles?\u003c\/h3\u003e\n\u003cp\u003eThese lug nuts are made to the M12x1.5 specification with a 60° cone seat and a 3\/4\" (19mm) hex, so they match many factory Ford wheel applications. Confirming fit requires checking your vehicle's thread pitch and seat type before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread pitch: M12 x 1.5\u003c\/li\u003e\n  \u003cli\u003eSeat angle: 60° cone (bulge\/acorn compatible)\u003c\/li\u003e\n  \u003cli\u003eHex size: 3\/4\" (19 mm) for common lug wrenches\u003c\/li\u003e\n  \u003cli\u003eClosed-end design: protects wheel studs from contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and rust-resistant are these lug nuts?\u003c\/h3\u003e\n\u003cp\u003eSKCOAUTO lug nuts are manufactured from 10.9-grade heat-treated steel and undergo 72-hour salt spray testing to improve corrosion resistance. The one-piece design avoids weak joints and extends service life under typical road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 10.9-grade heat-treated steel for higher tensile strength\u003c\/li\u003e\n  \u003cli\u003eCorrosion test: 72-hour salt spray resistance\u003c\/li\u003e\n  \u003cli\u003eDesign: closed-end one-piece construction, resists breaking\u003c\/li\u003e\n  \u003cli\u003eFinish: chrome for extra rust protection and easy cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is included in the package and which OEM parts does it replace?\u003c\/h3\u003e\n\u003cp\u003eThe package contains twenty lug nuts—enough for four wheels plus spares or to fully replace existing sets. They are intended as direct replacements for several OEM part numbers used on various Ford models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuantity: set of 20 lug nuts\u003c\/li\u003e\n  \u003cli\u003eOEM equivalents: replaces part numbers like 611303, ACPZ1012H, CV6Z1012C\u003c\/li\u003e\n  \u003cli\u003eCompatible models listed include Escape, Focus, Fusion, MKC, MKZ across noted years\u003c\/li\u003e\n  \u003cli\u003eClosed-end acorn\/bulge fitment for factory-style wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and torque these lug nuts safely?\u003c\/h3\u003e\n\u003cp\u003eUse a proper socket (19 mm) and a calibrated torque wrench to tighten lug nuts to your vehicle manufacturer’s recommended torque specification. Avoid over-tightening with an impact gun when possible; final torque should be set by hand with a torque wrench.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool: 3\/4\" (19 mm) socket for installation\u003c\/li\u003e\n  \u003cli\u003eProcedure: hand-start threads, tighten in a star pattern\u003c\/li\u003e\n  \u003cli\u003eTorque: follow vehicle-specific torque values (check owner’s manual)\u003c\/li\u003e\n  \u003cli\u003eInspection: re-check torque after first 50–100 miles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Car owners, independent mechanics, and fleet managers who need a reliable, OEM-compatible set of lug nuts for Ford vehicles—especially Escape owners from 2001 through 2019—will appreciate the SKCOAUTO M12x1.5 set. It’s suited for anyone replacing missing or damaged lug nuts, assembling wheels after maintenance, or stocking replacement parts. These lug nuts provide a durable, corrosion-resistant option that aligns with factory specifications while supplying a full set of 20 for convenience and coverage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lug nuts fit my 2015 Ford Escape?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your 2015 Escape uses M12x1.5 threads and a 60° cone seat, these SKCOAUTO lug nuts will fit. Verify thread pitch and seat type first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lug nuts corrosion-resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are made from 10.9-grade heat-treated steel and pass 72-hour salt spray testing for improved corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SKCOAUTO","offers":[{"title":"Default Title","offer_id":67592825438393,"sku":"B0DM8WMFY9","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/skcoauto-m12x1.5-front-view.jpg?v=1790568520"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/skcoauto-m12x1.5-front-view.jpg?v=1790612699","url":"https:\/\/redleafauto.ca\/collections\/skcoauto.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}