{"title":"Switches \u0026 Relays","description":"\u003cp\u003eWindow, headlight and ignition switches, plus relays and flasher units. Compare the connector pin count with your original part.\u003c\/p\u003e\u003cp\u003e383 products from 196 brands, including HD Switch, Dorman, A-Premium and ATRACYPART. Most are priced between $55 and $119 CAD.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"stinger-500a-battery-isolator-relay-for-cars-dual-battery-12v-water-resistant-high-current","title":"STINGER 500A Battery Isolator \u0026 Relay for Cars — Dual-Battery 12V Water-Resistant High-Current","description":"\u003cp\u003e\u003cstrong\u003eThe STINGER SGP35 is a water-resistant, high-current 500A relay and battery isolator designed to add a secondary battery to vehicle electrical systems while preventing primary battery drain.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for demanding mobile audio, marine and off-road setups, the SGP35 combines rugged phenolic construction with heavy-duty contacts to handle continuous high currents and surge loads. It activates with ignition power so your auxiliary battery only ties in while driving, leaving batteries separate at rest. The relay works with any 12V alternator or charging system and is engineered for long life and reliable service in wet or harsh environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SGP35 keep my primary battery from running down?\u003c\/h3\u003e\n\u003cp\u003eThe SGP35 acts as an automatic switch that stays open when your ignition is off, isolating the starter battery from auxiliary loads. When you start the vehicle, the relay closes and allows charging to reach the secondary battery. This prevents stereo, winch or accessory draw from flattening the starter battery when parked.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic ignition-triggered operation—no manual switching required\u003c\/li\u003e\n  \u003cli\u003eRemains electrically disconnected when engine is off to stop parasitic drain\u003c\/li\u003e\n  \u003cli\u003eCompatible with alternators and all standard charging setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat current can it safely handle for car audio and accessories?\u003c\/h3\u003e\n\u003cp\u003eSTINGER designed the SGP35 for high-current applications: it carries up to 500A continuous with the ability to tolerate higher short-term surges. That makes it suitable for powerful amplifiers, heavy accessory loads, or linking large auxiliary batteries during charging. Its contact materials and construction optimize current transfer and heat resistance for reliable performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e500 amps continuous current rating for sustained loads\u003c\/li\u003e\n  \u003cli\u003eDesigned to accept higher transient surge currents during startup\u003c\/li\u003e\n  \u003cli\u003eBuilt to reduce voltage drop across the relay contacts for efficient charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the SGP35 durable enough for outdoor, marine or off-road use?\u003c\/h3\u003e\n\u003cp\u003eThe relay housing is molded from water-resistant phenolic plastic to protect internal components from moisture, salt and grime. It’s specified for a long mechanical life—rated for 100,000 actuations—so it stands up to frequent cycling in demanding environments. That durability makes it a practical choice for marine, powersports and severe-weather installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWater-resistant phenolic case protects against moisture and corrosion\u003c\/li\u003e\n  \u003cli\u003e100,000 mechanical cycle life for extended reliability\u003c\/li\u003e\n  \u003cli\u003eCompact, service-friendly form factor for engine bay or rack mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and what charging systems are supported?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: wire the relay between the main and auxiliary battery circuits and connect the ignition trigger so it closes only while the engine runs. The SGP35 is compatible with all common 12V alternators, voltage regulators and charging architectures, so it integrates cleanly into most vehicle electrical systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple wiring: main battery, auxiliary battery and ignition trigger terminals\u003c\/li\u003e\n  \u003cli\u003eWorks with standard alternators, smart charging systems and regulators\u003c\/li\u003e\n  \u003cli\u003eCompact footprint simplifies mounting in tight engine compartments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The STINGER SGP35 is aimed at installers and vehicle owners who run high-power car audio, winches, inverters or multi-battery setups and need a dependable way to add a secondary battery without risking starter-battery depletion. It’s especially suited to marine, off-road and mobile-audio enthusiasts who require a water-resistant, long-life relay capable of handling heavy continuous and surge currents.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the SGP35 work with my vehicle's smart alternator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The SGP35 is compatible with all common 12V alternators and charging systems, including smart\/regulating setups.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it handle amplifier startup surges?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s rated for 500A continuous and designed to tolerate higher short-term surge currents during amplifier startup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"STINGER","offers":[{"title":"Default Title","offer_id":67584869433529,"sku":"B004WDPZEW","price":229.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/stinger-sgp35-front-view.jpg?v=1790457032"},{"product_id":"atracypart-climate-control-module-for-2003-2007-chevy-silverado-gmc-sierra-direct-fit-a-c-heater-panel-with-oem-connector-24-mo","title":"ATRACYPART climate control module for 2003–2007 Chevy Silverado GMC Sierra – direct-fit A\/C heater panel with OEM connector, 24-mo","description":"\u003cp\u003e\u003cstrong\u003eThe ATRACYPART 599-211XD climate control module is a direct-fit replacement HVAC panel that restores temperature, fan speed, and vent mode control for many 2002–2009 GM trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Silverado, Sierra, Tahoe, Yukon, Escalade or compatible GM vehicle shows unresponsive buttons, a flickering display, or loss of heater\/A\/C control, this replacement panel brings back full cabin climate management without complicated wiring. Built to match OEM connections, it’s intended as a straightforward swap to get your vents and temperature responding as they should.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this climate control panel fit?\u003c\/h3\u003e\n\u003cp\u003eThis unit covers a wide range of GM models across Chevrolet, GMC, Cadillac, Buick, Hummer and Oldsmobile from the early-2000s generation. Check the specific model years listed to confirm compatibility with your vehicle before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: Silverado 1500\/2500\/3500 series, Avalanche, Tahoe, Suburban, Trailblazer (2002–2009 range covered)\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra 1500\/2500\/3500, Yukon\/Yukon XL, Envoy series (2002–2009 coverage)\u003c\/li\u003e\n  \u003cli\u003eCadillac\/Buick\/Hummer\/Oldsmobile: Escalade variants, Rainier, H2, and Bravada within stated years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and will I need extra parts?\u003c\/h3\u003e\n\u003cp\u003eThe panel is designed as a plug-and-play replacement using OEM-style connectors, so no cutting, splicing, or programming should be necessary. Most installations can be completed with basic hand tools in a garage or at home.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses original connector layout for direct replacement—no wiring modifications required\u003c\/li\u003e\n  \u003cli\u003eInstalls using standard dash removal steps and basic tools (screwdrivers, trim tools)\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has additional HVAC faults (blend door motors, actuators), those may still need separate repair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat controls and symptoms does this part restore?\u003c\/h3\u003e\n\u003cp\u003eReplacing a faulty climate control panel typically returns control over temperature selection, blower speeds, and airflow modes. It’s targeted at issues caused by failed buttons, unlit or flickering displays, and internal control electronics rather than mechanical airflow components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores temperature up\/down control and mode selection (floor\/vent\/defrost)\u003c\/li\u003e\n  \u003cli\u003eReturns fan speed control and blower adjustments\u003c\/li\u003e\n  \u003cli\u003eEliminates non-responsive keys and unstable or dark readouts when caused by the control module\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this module meet quality expectations and what warranty is offered?\u003c\/h3\u003e\n\u003cp\u003eUnits are manufactured and tested to meet or exceed OEM performance standards for durability and functionality. ATRACYPART backs this panel with a 24-month warranty to provide reassurance and support if any defects appear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuality-tested for consistent operation and long service life\u003c\/li\u003e\n  \u003cli\u003e2-year warranty with replacement or refund options for qualified issues\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for troubleshooting installation or compatibility questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers and technicians who own the listed GM trucks and SUVs and need a dependable, cost-effective replacement for a failing climate control panel. It suits DIYers comfortable removing dash trim and connectors, fleet managers seeking a proven swap, and repair shops aiming to restore HVAC controls without lengthy diagnostics—provided the problem is the control module itself and not mechanical HVAC components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this panel plug into my vehicle without rewiring?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it uses an OEM-style connector for direct plug-and-play installation with no cutting or rewiring required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty comes with the ATRACYPART climate control module?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The module includes a 24-month warranty with replacement or refund options for qualifying defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":67584904364217,"sku":"B0F6V9HR2R","price":198.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/atracypart-climate-panel-front-view.jpg?v=1790458488"},{"product_id":"lisle-relay-and-fused-circuit-test-kit-69300-8-jumpers-relay-puller-pliers-for-automotive-diagnostics","title":"Lisle Relay and Fused Circuit Test Kit 69300 — 8 Jumpers, Relay Puller Pliers for Automotive Diagnostics","description":"\u003cstrong\u003eLisle 69300 Master Relay and Fused Circuit Test Kit is a compact toolkit for quickly testing automotive relays and live fused circuits without piercing wires.\u003c\/strong\u003e\n\n\u003cp\u003eThis kit consolidates the parts technicians need to probe relays, access fuse circuits and measure voltage or current safely and efficiently. Instead of splicing into harnesses, the Lisle 69300 relies on purpose-built relay jumpers, terminal leads and a simple test lead kit to make connections to a multimeter or bench power source. It also includes a pair of relay puller pliers so you can extract stubborn relays without damaging sockets or wiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the kit let me test relays without damaging wires?\u003c\/h3\u003e\n\u003cp\u003eThe included relay test jumpers mate directly to standard relay sockets and create clean test points for coil and switched contacts. That eliminates the need to pierce insulation, preserving connector integrity and reducing troubleshooting time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEight relay jumpers sized for most common automotive relays\u003c\/li\u003e\n  \u003cli\u003eJumpers connect to relays using existing socket pins—no splices required\u003c\/li\u003e\n  \u003cli\u003eRelay puller pliers remove relays for bench testing when needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connections and measurements can I make with this kit?\u003c\/h3\u003e\n\u003cp\u003eThe test lead assembly provides secure, multimeter-ready access to circuits for voltage and current checks. Terminal leads include switched, fused and power taps so you can verify feed, ground, coil activation and switched outputs in a variety of vehicle architectures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultimeter-ready leads for quick voltage and continuity checks\u003c\/li\u003e\n  \u003cli\u003eTerminal leads with inline fuse and switch options for safer live testing\u003c\/li\u003e\n  \u003cli\u003eConnections suited for coil activation, output verification and current checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it work on European and specialty relays?\u003c\/h3\u003e\n\u003cp\u003eYes — the kit’s assortment covers many North American and European relay pinouts and makes it possible to adapt to fewer-common configurations. For unusual layouts found on some Volkswagen, BMW and other models, the lead set and jumper combinations add flexibility for diagnostic access.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEight jumpers cover a wide range of relay pin patterns\u003c\/li\u003e\n  \u003cli\u003eFlexible terminal leads adapt to less-common vehicle fuse and relay layouts\u003c\/li\u003e\n  \u003cli\u003eUseful for both modern imports and typical domestic vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit speed up day-to-day electrical troubleshooting?\u003c\/h3\u003e\n\u003cp\u003eBy providing ready-made interfaces to relays and fuses, the Lisle 69300 reduces the time spent fabricating adapters or cutting into harnesses. You can rapidly confirm relay operation, trace power paths and test circuits on the vehicle or on a bench without improvising test points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast swap of relay jumpers for immediate testing at the fuse box or relay block\u003c\/li\u003e\n  \u003cli\u003eMultimeter-compatible leads minimize time setting up measurements\u003c\/li\u003e\n  \u003cli\u003eRelay puller allows quick removal and bench testing when required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this tool is for: automotive technicians, fleet mechanics, DIY enthusiasts and electrical troubleshooters who need a reliable, non-destructive way to test relays and fused circuits. The Lisle 69300 is especially useful when you want to preserve vehicle wiring, troubleshoot a wide range of relay types, and speed up diagnostics across domestic and imported models. It’s a practical addition to any electrical troubleshooting kit when accurate, wire-safe access to relays and fuses is required.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eKit contents and specifications: eight relay test jumpers, multimeter test lead kit, terminal leads with switch\/fuse\/power options, and relay puller pliers. Designed to help test coil activation, switched outputs, and fuse-supplied circuits without piercing wires.\u003c\/em\u003e\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I test relays without removing them from the vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Lisle 69300 jumpers connect to relay sockets so you can test coil and contacts without pulling or cutting wires.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit work with European vehicles like BMW or Volkswagen?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The assorted jumpers and flexible terminal leads adapt to many European relay and fuse configurations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lisle","offers":[{"title":"Default Title","offer_id":67585022853305,"sku":"B00CRQSYY4","price":420.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lisle-69300-front-view-kit.jpg?v=1790463802"},{"product_id":"dorman-fuel-tank-sending-unit-replacement-285-5401-direct-fit-improved-float-arm","title":"Dorman Fuel Tank Sending Unit replacement 285-5401 — direct-fit, improved float arm","description":"\u003cp\u003e\u003cstrong\u003eThe Dorman 285-5401 is a direct-replacement fuel tank sending unit engineered to restore accurate fuel level readings and fit the original equipment mounting points.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle’s gas gauge has begun to read erratically, stick at full or empty, or fails to respond, a failed sending unit is often the cause. The Dorman 285-5401 replaces the OE sender with a factory-style unit built from durable materials to provide consistent operation and long service life. It’s designed to match original fit and electrical connections on compatible applications so installation is straightforward for DIYers and technicians alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this sending unit improve my fuel gauge accuracy?\u003c\/h3\u003e\n\u003cp\u003eBy replacing a worn or failed internal sensor and float arm, the 285-5401 restores the variable resistance signal the gauge expects. That means more reliable, linear readings across the tank’s range so your gauge reflects actual fuel level instead of jumping or sticking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces the original sensor to re-establish correct resistance values.\u003c\/li\u003e\n  \u003cli\u003eNew float arm reduces binding and erratic readings.\u003c\/li\u003e\n  \u003cli\u003eQuality materials resist wear, helping prevent repeat failures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my vehicle and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe unit is built to match OEM mounting, electrical plug patterns, and float orientation for specified makes and models. Installation typically requires accessing the tank or service port, disconnecting the old sender, and swapping in the new part using the same mounting hardware and connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned as a direct replacement for specified applications.\u003c\/li\u003e\n  \u003cli\u003eMaintains original connector and mounting alignment for simple swap-in.\u003c\/li\u003e\n  \u003cli\u003eUse the vehicle lookup tool (make, model, trim) to confirm compatibility before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features ensure durability?\u003c\/h3\u003e\n\u003cp\u003eThe Dorman 285-5401 uses engineered plastics and corrosion-resistant components in areas exposed to fuel and tank vapors. Those choices limit deterioration from fuel additives and moisture, extending the operational life compared with degraded original parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSturdy plastic housing resists fuel exposure and cracking.\u003c\/li\u003e\n  \u003cli\u003ePrecision-wound sensor track for consistent electrical output.\u003c\/li\u003e\n  \u003cli\u003eRobust float arm pivot points reduce wear and wobble.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm compatibility and avoid returns?\u003c\/h3\u003e\n\u003cp\u003eBecause fuel systems vary by year, trim, and tank design, verifying fit before ordering prevents installation issues. Cross-check the Dorman part number with your vehicle’s specifications or use the retailer’s garage lookup tool for a quick match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck make, model, year, and trim in the online fitment tool.\u003c\/li\u003e\n  \u003cli\u003eCompare connector style and mounting flange shape to your original unit.\u003c\/li\u003e\n  \u003cli\u003eKeep your vehicle VIN handy if the site accepts it for precise matches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dorman 285-5401 is aimed at vehicle owners and professional mechanics who need a dependable, cost-effective replacement for a failing fuel level sender. It’s well suited for DIY repairers comfortable with basic underbody or access-panel work, and for repair shops looking for a durable aftermarket option that restores gauge performance without modifying the vehicle’s wiring or tank.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Dorman 285-5401 a direct OE replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed to match the original fit and electrical connections for specified applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this sender myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if you can access the tank or service port and swap the old unit, it’s a straightforward replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":67585071874233,"sku":"B008720RR4","price":312.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dorman-285-5401-front-assembly.jpg?v=1790465998"},{"product_id":"autokay-front-cruise-distance-radar-sensor-for-nissan-altima-rogue-kicks-2017-2021-direct-oem-fit-part-28438-5fa6a","title":"AUTOKAY Front Cruise Distance Radar Sensor for Nissan Altima Rogue Kicks 2017–2021 — Direct OEM Fit, Part 28438-5FA6A","description":"\u003cp\u003e\u003cstrong\u003eAUTOKAY's front cruise distance radar sensor (replace part 28438-5FA6A) restores forward distance detection for compatible Nissan Altima, Rogue and Kicks models from 2017–2021.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is a direct replacement front radar module designed to interface with Nissan adaptive cruise control and forward collision systems. Built to match the OEM mounting points and electrical connector, the sensor helps re-establish factory-like distance sensing after a damaged or missing unit. The part is sold as a single sensor and fits multiple trims and engine options across Altima, Rogue, Rogue Sport and Kicks model years listed below.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Nissan models and years will this radar sensor fit?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOKAY sensor is compatible with many Nissan Altima, Rogue, Rogue Sport and Kicks vehicles spanning 2017 through 2021. Fitment covers several trims and both 2.0L\/2.5L gasoline engines or 1.6L for Kicks where specified. Always verify the original part number (28438-5FA6A) on your vehicle before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNissan Altima: 2019–2021 (2.0L, 2.5L) including S, SL, SR, SV, Platinum trims\u003c\/li\u003e\n  \u003cli\u003eNissan Rogue: 2017–2021 (2.0L, 2.5L) including S, SL, SV and hybrid variations where applicable\u003c\/li\u003e\n  \u003cli\u003eNissan Rogue Sport: 2017–2021 (2.0L) S, SL, SV trims\u003c\/li\u003e\n  \u003cli\u003eNissan Kicks: 2020–2021 (1.6L) S, SR, SV trims\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement sensor match the original equipment?\u003c\/h3\u003e\n\u003cp\u003eThis unit is manufactured to align with OEM form, fit and electrical connections so it installs into the factory bracket and plugs into the existing harness. It is intended as a direct swap to avoid modification of the bumper or wiring. Proper alignment and calibration after installation are necessary to restore system performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement part number: 28438-5FA6A\u003c\/li\u003e\n  \u003cli\u003eFactory-style mounting and connector compatibility\u003c\/li\u003e\n  \u003cli\u003eSold as a single front cruise distance radar sensor\u003c\/li\u003e\n  \u003cli\u003eRequires post-installation calibration by a qualified technician\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and setup?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically involves removing the bumper cover, unbolting the existing sensor, and swapping in the AUTOKAY unit before reconnecting the wiring. After the sensor is mechanically installed, many vehicles require a diagnostic alignment or software calibration to ensure accurate detection and to clear any system warnings. If you’re unsure, use a professional service or a dealer with the appropriate calibration tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic tools and bumper removal required for access\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play electrical connector designed to match the OEM harness\u003c\/li\u003e\n  \u003cli\u003eCalibration via scan tool or dealer required to clear fault codes\u003c\/li\u003e\n  \u003cli\u003eSold individually—one sensor per package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sensor restore adaptive cruise and forward sensing functions?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failed or missing front radar with this AUTOKAY sensor can restore the vehicle’s forward distance sensing and adaptive cruise features when installed and calibrated correctly. Note that system behavior depends on proper installation, vehicle software, and any other related components being functional.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores hardware needed for distance monitoring when integrated correctly\u003c\/li\u003e\n  \u003cli\u003eDoes not include calibration service or guarantee of ECU reinitialization\u003c\/li\u003e\n  \u003cli\u003eCheck compatibility using original part number before ordering\u003c\/li\u003e\n  \u003cli\u003eContact AUTOKAY support if you have questions about fit or function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOKAY front cruise distance radar sensor is aimed at Nissan owners, independent shops and mechanics who need a direct-replacement module for Altima, Rogue, Rogue Sport or Kicks vehicles from 2017–2021. It’s suitable for anyone restoring adaptive cruise or forward sensing functionality after collision damage or sensor failure, provided you have access to post-installation calibration services.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sensor fit my 2020 Nissan Rogue?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this AUTOKAY sensor fits many 2020 Nissan Rogue trims (2.5L and some hybrid variants). Verify your vehicle's original part number (28438-5FA6A) before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is calibration required after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, post-installation calibration or diagnostic alignment is typically required to restore proper sensing and clear system warnings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOKAY","offers":[{"title":"Default Title","offer_id":67585075839161,"sku":"B0BYN7L94F","price":181.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autokay-front-radar-sensor-front-view.jpg?v=1790466229"},{"product_id":"degowget-heater-a-c-control-switch-for-peterbilt-q21-6012-direct-replacement-oem-style-fit-2006-2024","title":"Degowget Heater \u0026 A\/C Control Switch for Peterbilt Q21-6012 — Direct Replacement, OEM-Style Fit (2006–2024)","description":"\u003cstrong\u003eDegowget Q21-6012 is a direct-replacement heater and A\/C control switch designed to restore full climate control functionality in compatible Peterbilt trucks.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Peterbilt cab has unresponsive knobs, inconsistent temperature control, or a nonworking climate control panel, this Degowget replacement module (part numbers Q216012 \/ Q21-6012) provides a factory-fit solution. Built and tested to meet OEM-style standards, the control switch is intended for straightforward installation and long-term reliability across many Peterbilt models spanning the 2006–2024 model years.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Peterbilt models will this control switch fit?\u003c\/h3\u003e\n\u003cp\u003eThis control switch fits a wide range of Peterbilt cab configurations. Verify compatibility by checking the part number and year range before ordering to avoid returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fitment: 325, 330, 335, 337, 348, 357, 365, 367, 378, 379, 384, 385, 386, 388, 389\u003c\/li\u003e\n  \u003cli\u003eModel years covered include select 2006–2024 vehicles; always cross-check part Q216012 \/ Q21-6012 with your VIN\u003c\/li\u003e\n  \u003cli\u003eDesigned as a direct-replacement for dash-mounted HVAC control modules on compatible Peterbilt trucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement improve HVAC performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failing control switch restores precise control over fan speed, air distribution, and temperature settings. The module resolves issues like intermittent controls, stuck knobs, and incorrect mode selection without changing the rest of your HVAC system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReestablishes reliable electrical signaling to the HVAC actuators and blower\u003c\/li\u003e\n  \u003cli\u003eEliminates erratic or non-responsive control inputs caused by worn switches\u003c\/li\u003e\n  \u003cli\u003eMaintains original dash appearance and user interface for driver familiarity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and setup?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a straightforward dash replacement requiring basic hand tools and a few minutes of wiring or plug reconnection. No special calibration steps are usually necessary; the switch plugs into the factory harness and resumes normal operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connector compatibility with original Peterbilt wiring harnesses on supported models\u003c\/li\u003e\n  \u003cli\u003eSimple dash removal or trim access may be required for replacement\u003c\/li\u003e\n  \u003cli\u003eOne-year warranty by Degowget for manufacturing defects and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this switch built to last and what support is available?\u003c\/h3\u003e\n\u003cp\u003eDegowget sources this control switch from professional manufacturers and subjects it to quality checks that align with OEM expectations. If you encounter a defect or compatibility concern, Degowget provides a one-year warranty and customer support to assist with returns or exchanges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured and tested to meet strict OEM-style quality standards\u003c\/li\u003e\n  \u003cli\u003eBacked by a one-year warranty covering manufacturer defects\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment questions and post-sale assistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This control switch is aimed at fleet managers, owner-operators, and service technicians who need a dependable replacement for a malfunctioning Peterbilt HVAC panel. If you operate any of the listed Peterbilt models and are experiencing unreliable climate control or damaged dash controls, the Degowget Q21-6012 offers a cost-effective repair that restores original functionality and preserves the cab’s factory look.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm Q21-6012 fits my Peterbilt?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your truck model and year against the listed fitments and confirm the existing part number matches Q216012 or Q21-6012.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this control switch come with a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, Degowget includes a one-year warranty covering manufacturer defects and workmanship.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Degowget","offers":[{"title":"Default Title","offer_id":67585079902393,"sku":"B0GHMS6TSB","price":207.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/degowget-front-panel-view.jpg?v=1790466405"},{"product_id":"davies-craig-digital-thermatic-fan-switch-kit-0444-dashboard-mount-12-27v-dual-relay-104-230-f-adjustable","title":"Davies Craig Digital Thermatic Fan Switch Kit #0444 - dashboard mount, 12–27V dual-relay, 104–230°F adjustable","description":"\u003cp\u003e\u003cstrong\u003eThe Davies Craig Digital Thermatic Fan Switch Kit #0444 is a compact, dashboard-mountable controller that automatically turns one or two electric cooling fans (or an EWP pump) on and off at a user-set temperature between 104°F and 230°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit provides precise thermal switching for radiator cooling systems, sensing air temperature through a fin-mounted thermistor probe (or via a coolant-mounted probe with an optional adaptor). It supports 12–27V systems with configurable Fahrenheit or Celsius readout, dual-relay outputs for two fans, and a microcontroller-based circuit for consistent, repeatable fan activation. The unit is intended for installation in the engine compartment where it monitors airflow or coolant temperature and triggers fans—useful for street, race, and retrofit cooling setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Davies Craig digital switch detect temperature and trigger fans?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses a thermistor probe that either sits in the radiator fins or, with an adaptor, mounts directly into the coolant path. The controller continuously reads the probe and activates Fan #1 when the measured temperature reaches the setpoint; Fan #2 (if fitted) engages 10 seconds later for staged cooling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProbe: radiator fin placement or coolant adaptor (part # 317-DC-0409)\u003c\/li\u003e\n  \u003cli\u003eSet range: adjustable 104°F to 230°F (40°C to 110°C)\u003c\/li\u003e\n  \u003cli\u003eFan sequencing: Fan #2 delays 10 seconds after Fan #1\u003c\/li\u003e\n  \u003cli\u003eHysteresis: turns off when temperature falls approximately 5°C below setpoint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this switch with my 24V vehicle and how much current can it handle?\u003c\/h3\u003e\n\u003cp\u003eThe controller accepts 12–27V input, making it compatible with most 12V and higher-voltage systems; however, for genuine 24V installations you must fit relays rated for that voltage since the kit’s supplied relays are not suitable for all 24V setups. Each fan output can switch up to 40A, so heavy-duty fans or pumps should be wired with appropriately rated relays and cabling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating voltage: 12–27V (verify relay requirements for 24V)\u003c\/li\u003e\n  \u003cli\u003eMax current: 40A per fan output\u003c\/li\u003e\n  \u003cli\u003eDual-relay configuration: supports one or two separate fan circuits\u003c\/li\u003e\n  \u003cli\u003eOutput wires: battery, ignition, AC-clutch trigger, Fan #1, Fan #2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and protection should I consider for engine bay use?\u003c\/h3\u003e\n\u003cp\u003eThe compact module mounts inside the engine compartment but is not fully waterproof, so position it away from direct water spray and sealed jets. The enclosure is protected against dust ingress and designed to withstand typical engine-bay conditions, but routing and relay placement should follow best-practice electrical protection and heat shielding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDimensions: 95mm × 65mm × 56mm for compact mounting\u003c\/li\u003e\n  \u003cli\u003eNot waterproof — avoid direct high-pressure spray despite some directional water protection\u003c\/li\u003e\n  \u003cli\u003eMount where wiring and relays are protected from extreme heat and moisture\u003c\/li\u003e\n  \u003cli\u003eUse appropriate fuses and high-quality connectors for 40A circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow user-friendly is temperature setting and display?\u003c\/h3\u003e\n\u003cp\u003eTemperature is set via a single push button on the controller, and the display can toggle between Centigrade and Fahrenheit for easy reading. The microcontroller handles the logic, so once you set a target temperature the unit will engage fans automatically without further adjustment until you change the setpoint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSet method: one-button temperature programming\u003c\/li\u003e\n  \u003cli\u003eDisplay: selectable °C or °F readout\u003c\/li\u003e\n  \u003cli\u003eOperation: automatic on\/off based on programmed setpoint\u003c\/li\u003e\n  \u003cli\u003eWorks with AC operation to force cooling when A\/C runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Davies Craig Digital Thermatic Fan Switch #0444 is aimed at car builders, performance tuners, and maintenance-minded owners who need a reliable, adjustable fan controller for radiator-mounted electric fans or EWP setups. Choose this kit if you want precise thermal control, dual-fan staging, and compatibility with 12–27V electrical systems—just plan relay selection and mounting to suit higher-voltage vehicles and protect the unit from direct water spray.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this unit control two fans?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it runs one or two fans; Fan #2 starts 10 seconds after Fan #1 and each output supports up to 40A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the controller waterproof for engine bay mounting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — it has dust protection but is not waterproof; avoid direct high-pressure water spray when mounting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Davies Craig","offers":[{"title":"Default Title","offer_id":67585084489913,"sku":"B06ZYGD6J7","price":178.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/davies-craig-controller-front-view.jpg?v=1790466628"},{"product_id":"abb-100a-two-pole-q-line-circuit-breaker-thql21100p-120-240v-thermal-magnetic","title":"ABB 100A Two-Pole Q-Line Circuit Breaker THQL21100P 120\/240V Thermal-Magnetic","description":"\u003cp\u003e\u003cstrong\u003eThe ABB THQL21100P is a 100-amp, two-pole Q-Line circuit breaker for 120\/240 V load centers that provides thermal-magnetic protection and ground-fault sensing for residential and light commercial panels.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact THQL breaker is built to replace or upgrade two-pole spaces in compatible ABB\/GE load centers and lighting panels. Manufactured by ABB (including GE by ABB legacy products), the THQL21100P uses a plug-in Q-Line form factor and quick-make\/quick-break mechanism to deliver reliable interruption of overloads and short circuits while meeting industry safety standards. Always confirm model compatibility and certification markings on the product label before installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this breaker protect a 120\/240 V electrical panel?\u003c\/h3\u003e\n\u003cp\u003eThe THQL21100P combines a thermal-magnetic trip element with ground fault sensing to interrupt dangerous currents quickly. The two-pole design simultaneously disconnects both hot legs for proper 240 V circuit protection and balanced 120\/240 V loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100 A continuous rating for heavier branch circuits\u003c\/li\u003e\n  \u003cli\u003eThermal element for overload response\u003c\/li\u003e\n  \u003cli\u003eMagnetic trip for short-circuit interruption\u003c\/li\u003e\n  \u003cli\u003eGround-fault sensing for personnel and equipment protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the THQL21100P fit my existing load center?\u003c\/h3\u003e\n\u003cp\u003eThis breaker fits THQL-style Q-Line load centers and lighting panels produced by ABB and legacy GE lines. Compatibility depends on the panel’s bus and chassis design, so verify the panel’s list of supported breakers and ensure the breaker’s plug-in form matches the slot spacing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for THQL Q-Line panel footprints\u003c\/li\u003e\n  \u003cli\u003eOne-inch-wide per pole, plug-in installation\u003c\/li\u003e\n  \u003cli\u003eWorks in compatible ABB\/GE residential and light-commercial panels\u003c\/li\u003e\n  \u003cli\u003eCheck panel labeling and third-party certifications (UL, Intertek) before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should an installer know?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for qualified electricians: the THQL21100P plugs into a compatible load center and secures per the panel manufacturer’s instructions. Turn off main power, follow local electrical codes, and confirm grounding and neutral arrangements for circuits requiring ground-fault protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-in style for rapid replacement or addition\u003c\/li\u003e\n  \u003cli\u003eFollow NEC requirements for GFCI protection where applicable\u003c\/li\u003e\n  \u003cli\u003eRequires proper torque on terminations and correct mating with the bus\u003c\/li\u003e\n  \u003cli\u003eInstallation should be performed by a licensed electrician\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and quality standards apply to this ABB breaker?\u003c\/h3\u003e\n\u003cp\u003eABB manufactures THQL breakers to meet recognized industry safety and performance standards; many units carry third-party certification marks. Confirm the individual product label for specific approvals and retain manufacturer warranty information from ABB or authorized distributors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt to ABB manufacturing and quality practices\u003c\/li\u003e\n  \u003cli\u003eLook for UL or Intertek certification marks on the device label\u003c\/li\u003e\n  \u003cli\u003eIncludes clear trip indication and robust mechanical operation\u003c\/li\u003e\n  \u003cli\u003eABB continues to support legacy GE residential distribution product lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The ABB THQL21100P is intended for licensed electricians, electrical contractors, and knowledgeable homeowners upgrading or repairing residential and light-commercial panels that accept Q-Line THQL breakers. Choose this model when you need a certified two-pole 100 A solution for 120\/240 V circuits where reliable thermal-magnetic and ground-fault protection is required; always verify panel compatibility and follow local electrical codes during installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the THQL21100P compatible with GE load centers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—ABB manufactures GE legacy Q-Line breakers; confirm the panel accepts THQL Q-Line plug-in breakers before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this breaker provide ground-fault protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The THQL21100P includes ground-fault sensing features; ensure wiring and panel requirements meet NEC and local codes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":67585087340729,"sku":"B003WIMQ68","price":171.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/abb-thql21100p-front-panel-view.jpg?v=1790466792"},{"product_id":"jaeparbus-599-210xd-climate-control-module-for-2003-2007-gm-trucks-suvs-manual-hvac-replacement-plug-and-play","title":"Jaeparbus 599-210XD Climate Control Module for 2003–2007 GM Trucks \u0026 SUVs — Manual HVAC Replacement, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eReplace a faulty manual HVAC panel with the Jaeparbus 599-210XD climate control module for reliable fan, temperature and mode control in compatible 2003–2007 GM trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Silverado, Sierra, Tahoe, Yukon, Avalanche, Envoy or other compatible GM vehicle has broken knobs, stuck blower speeds, or intermittent HVAC operation, the 599-210XD panel restores full manual climate control without programming. This matching-equipment replacement is built to slide into the original dash opening and use the factory connectors so installation stays straightforward and predictable.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and dashboards will this 599-210XD unit fit?\u003c\/h3\u003e\n\u003cp\u003eThis part is designed for manual (analog knob) HVAC systems across a broad family of GM platforms from the early-to-mid 2000s. It is not compatible with digital\/automatic climate control modules or the 2007 new-body Silverado\/Sierra models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits: Chevy Silverado 1500\/2500\/3500 (2003–2006; 2007 Classic), Avalanche 1500\/2500 (2003–2006), Suburban 1500\/2500 (2003–2006), Tahoe (2003–2006), Trailblazer (2003–2009).\u003c\/li\u003e\n  \u003cli\u003eAlso: GMC Sierra 1500\/2500\/3500 (2003–2006; 2007 Classic), Yukon\/Yukon XL (2003–2006), Envoy (2003–2009), Buick Rainier, Isuzu Ascender, Oldsmobile Bravada, Saab 9-7x.\u003c\/li\u003e\n  \u003cli\u003eNot for: digital automatic controllers (599-211XD) or 2007 new-body Silverado\/Sierra.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm this is the correct replacement for my car?\u003c\/h3\u003e\n\u003cp\u003eConfirm the original part number and connector layout before ordering. The 599-210XD uses different rear wiring and internal circuitry than digital units, so visual comparison prevents returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck your current panel for part number 599-210XD or cross-reference listed OEM numbers.\u003c\/li\u003e\n  \u003cli\u003eCompare the rear plug style and pin layout to the product photos or your original module.\u003c\/li\u003e\n  \u003cli\u003eEnsure your vehicle uses manual\/analog knobs rather than an automatic climate display.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat functions and features are restored when I install this module?\u003c\/h3\u003e\n\u003cp\u003eInstalling the Jaeparbus 599-210XD returns full manual control over fan speeds, temperature selection, vent modes and defrost — eliminating non-responsive knobs and unreliable blower behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eControls: fan speed, temperature, vent mode, defrost and airflow direction.\u003c\/li\u003e\n  \u003cli\u003eDurability: reinforced PC housing resists heat, vibration, fading and corrosion.\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play: direct connector match with no coding or special tools required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installation require special tools or programming?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended as a straightforward plug-and-play swap for matching manual HVAC dashboards. No dealer reprogramming or flashing is needed when the connectors and part number match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove the old panel, disconnect the factory harness, and plug in the new unit.\u003c\/li\u003e\n  \u003cli\u003eVerify all knobs and modes respond; if connectors differ, do not force connections.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, compare images of the rear plug and OEM numbers to confirm compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Jaeparbus 599-210XD climate control module is aimed at owners and DIY mechanics of early-to-mid-2000s GM trucks and SUVs who need an affordable, reliable replacement for worn or non-functional manual HVAC panels. It’s ideal if you want an OEM-style fit, corrosion-resistant construction, and a no-programming swap that gets climate controls working like new again.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eImportant note:\u003c\/em\u003e This product replaces manual analog-control units only. It will not replace digital automatic controllers (model 599-211XD) due to different wiring and circuitry. Always verify your part number and rear connector layout before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this 599-210XD work with the 2007 Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits the 2007 Silverado only when the truck is the Classic\/old body with analog knobs, not the 2007 new-body models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I swap this for a digital automatic climate controller?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The 599-210XD is for manual\/analog HVAC systems and is not compatible with 599-211XD digital automatic controllers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Jaeparbus","offers":[{"title":"Default Title","offer_id":67585131217081,"sku":"B0FQNH6R15","price":173.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jaeparbus-front-panel-599-210xd.jpg?v=1790468399"},{"product_id":"kuttole-ignition-assembly-for-gm-trucks-suvs-2000-2009-lock-cylinder-starter-switch-passlock-sensor","title":"KUTTOLE Ignition Assembly for GM Trucks \u0026 SUVs (2000–2009) — Lock Cylinder, Starter Switch, Passlock Sensor","description":"\u003cp\u003e\u003cstrong\u003eKUTTOLE’s Ignition Assembly is a complete replacement lock cylinder, housing and starter switch engineered to restore ignition and theft-deterrent function for many GM trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your steering column is stuck, the key won’t turn, or the security light flashes after a passlock failure, this ready-to-install assembly replaces worn OEM components and re-establishes communication between the ignition cylinder and the vehicle’s theft-deterrent module. Constructed from high-quality metal and factory-tested for fit, it’s designed as a direct swap for the original lock housing in a broad range of Chevy, GMC, Cadillac, Hummer and Buick models from the early 2000s.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this ignition assembly fit?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is compatible with many GM platforms from 2000–2009 and replaces specific OEM part references. Verify year and model before purchase to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevy: Avalanche, Silverado (1500\/2500\/3500, HD, Classic), Suburban, Tahoe, Blazer, S10, SSR, Trailblazer EXT\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra, Envoy, Yukon, Jimmy, Sonoma, Sierra HD and XL models\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Cadillac Escalade (EXT\/ESV), Hummer H2, Buick Rainier, Oldsmobile Bravada\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers US-312L, 924-713, 924-715\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this unit resolve ignition and security-light problems?\u003c\/h3\u003e\n\u003cp\u003eThe KUTTOLE assembly includes a replacement starter switch and a passlock sensor designed to restore electrical communication lost when the original components wear or fail. Installing the assembly typically stops a flashing security light, allows proper key rotation, and enables vehicle start-up when a passlock failure caused the immobilizer to lock out.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated passlock sensor reestablishes theft-deterrent communication\u003c\/li\u003e\n  \u003cli\u003eStarter switch replaces worn electrical contacts for reliable cranking\u003c\/li\u003e\n  \u003cli\u003eDirect-fit housing aligns with factory linkages to restore mechanical function\u003c\/li\u003e\n  \u003cli\u003eOEM-style design minimizes additional programming or adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and testing standards for this replacement?\u003c\/h3\u003e\n\u003cp\u003eKUTTOLE manufactures this ignition set from durable metals and subjects assemblies to vehicle try-on testing to confirm fit and operation. Each unit is inspected before shipping to reduce the risk of premature wear and to match OEM geometry and electrical behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality metal construction for improved longevity\u003c\/li\u003e\n  \u003cli\u003eFactory-style starter switch and lock cylinder for consistent performance\u003c\/li\u003e\n  \u003cli\u003ePre-shipment inspection and testing for function and fit\u003c\/li\u003e\n  \u003cli\u003eDesigned as a direct replacement—no major modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the replacement and troubleshoot common issues?\u003c\/h3\u003e\n\u003cp\u003eReplacement typically follows standard steering column disassembly and swap procedures; consult a repair manual or a professional if you’re not comfortable. If the black actuator piece is stuck, a small pin can be used to depress the release hole so the part retracts during removal or installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFollow vehicle-specific column removal steps to access the lock housing\u003c\/li\u003e\n  \u003cli\u003eUse a needle\/pin in the tiny release hole to retract the black actuator when needed\u003c\/li\u003e\n  \u003cli\u003eConfirm electrical connectors seat fully and test key positions before reassembly\u003c\/li\u003e\n  \u003cli\u003eCheck part numbers and compatibility before fitment to avoid returns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: this ignition assembly is intended for owners, mechanics, and DIY technicians working on compatible GM vehicles whose original ignition lock housing, cylinder or starter switch has become worn, stuck, or caused a passlock\/security light fault. It’s ideal for anyone seeking a direct OEM-style replacement to restore key rotation, electrical starting function, and theft-deterrent communication without replacing multiple components separately.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this ignition assembly stop my security light from flashing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; replacing a failed passlock sensor and starter switch often stops the flashing security light by restoring communication with the theft-deterrent module.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to program the new part after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installs are plug-and-play; in some cases you may need a simple relearn procedure or dealer scan tool depending on the vehicle and immobilizer behavior.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KUTTOLE","offers":[{"title":"Default Title","offer_id":67585137574073,"sku":"B0D8XY3MF3","price":194.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kuttole-ignition-assembly-front-view.jpg?v=1790468726"},{"product_id":"motorcraft-sw7917-switch-assembly-replacement-for-ford-lincoln-mercury-oem-direct-fit-electrical-switch-durable-contacts","title":"Motorcraft SW7917 Switch Assembly replacement for Ford Lincoln Mercury — OEM direct-fit electrical switch, durable contacts","description":"\u003cp\u003e\u003cstrong\u003eThe Motorcraft SW7917 Switch Assembly is an OEM-quality replacement electrical switch engineered to restore original fit and reliable operation on compatible Ford, Lincoln, and Mercury models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen an essential switch in your vehicle begins to fail — whether it's an ignition, brake, or lighting control switch — the SW7917 provides a direct, factory-style replacement designed to match the original specifications. Motorcraft parts are recommended by Ford and manufactured to meet the company's exacting standards, offering the dependability expected from an OEM component without the dealer markup. This switch assembly is built to install cleanly in place of the original part, helping you get back on the road with minimal fuss.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does the Motorcraft SW7917 Switch Assembly replace and why does fitment matter?\u003c\/h3\u003e\n\u003cp\u003eThe SW7917 is intended as a direct replacement for the original equipment switch in vehicles specified by Ford’s parts catalog. Correct fitment ensures connectors, mounting points, and electrical contacts line up precisely, preventing loose connections, chafing, or erratic operation. Using a direct-fit part also preserves factory wiring and mechanical interfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect OEM replacement designed to match original dimensions\u003c\/li\u003e\n  \u003cli\u003eCompatible with factory electrical connectors and mounting points\u003c\/li\u003e\n  \u003cli\u003eReduces need for wiring modification or aftermarket adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this switch assembly ensure reliable performance?\u003c\/h3\u003e\n\u003cp\u003eMotorcraft produces parts to Ford Motor Company standards, which means the SW7917 undergoes quality checks and uses materials selected for long-term durability. The assembly includes robust contacts and housings that resist wear from repeated use and exposure to under-dash or engine-bay environments. That construction helps maintain consistent electrical signals and reduces failure risk over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to meet Ford’s material and performance criteria\u003c\/li\u003e\n  \u003cli\u003eDurable contact surfaces for consistent electrical continuity\u003c\/li\u003e\n  \u003cli\u003eHousing designed to withstand vibration and temperature cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation for a technician or DIYer?\u003c\/h3\u003e\n\u003cp\u003eBecause the SW7917 is a direct-fit Motorcraft part, installation is typically straightforward: remove the failed switch, disconnect the harness, and install the new assembly in the original location. Professional installers and experienced DIYers alike will appreciate that no additional fabrication is usually required. Always follow vehicle-specific service instructions and safety precautions when working on electrical systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connector compatibility minimizes installation time\u003c\/li\u003e\n  \u003cli\u003eMounting points match factory locations for a secure fit\u003c\/li\u003e\n  \u003cli\u003eNo special tools usually required beyond basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this replacement switch best suited for? The Motorcraft SW7917 Switch Assembly is intended for owners and technicians servicing Ford, Lincoln, and Mercury vehicles who want a replacement that mirrors factory quality and fit. It’s a good choice for people who prefer OEM-specified parts to preserve factory performance and resale value, and for repair shops that need dependable components that meet Ford’s standards. If your vehicle’s original switch shows signs of intermittent operation, physical damage, or complete failure, the SW7917 offers a reliable fix with straightforward installation and proven Motorcraft manufacturing behind it.\u003c\/p\u003e\n\n\u003cp\u003eNote: Always verify part number compatibility with your vehicle identification number (VIN) or factory parts catalog before purchasing. Installation instructions and torque specifications vary by model and year; consult the vehicle service manual or a qualified technician for guidance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the SW7917 a direct OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Motorcraft SW7917 is built to match original equipment specifications for direct fit and connector compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install this switch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are typically required; basic hand tools suffice, but follow model-specific service instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Motorcraft","offers":[{"title":"Default Title","offer_id":67585146060985,"sku":"B071JHH3TX","price":163.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/motorcraft-switch-assembly-front-packaging.jpg?v=1790468918"},{"product_id":"switch-pros-sp-9100-8-switch-programmable-panel-125a-waterproof-power-module-rgb-backlit","title":"Switch-Pros SP-9100 8-Switch Programmable Panel — 125A Waterproof Power Module, RGB Backlit","description":"\u003cb\u003eSwitch-Pros SP-9100 is an 8-switch programmable bezel-style control panel paired with a 125A waterproof power module for reliable, compact vehicle accessory management.\u003c\/b\u003e\n\nThe SP-9100 combines an attractive bezel panel with a solid-state power module to centralize control of lighting and accessories. It offers eight user-programmable switches, mixed high-current outputs (four 35A and four 18A circuits), RGB backlighting for dash-matching colors, and a Bluetooth app for on-vehicle or remote configuration. Concealed mounting hardware keeps the installation neat while the waterproof, solid-state power module reduces maintenance by eliminating fuses and bulky relays.\n\n\u003ch3\u003eHow does the SP-9100 help me control multiple accessories?\u003c\/h3\u003e\n\u003cp\u003eThe system consolidates up to eight separate accessory circuits into one compact interface, with a single power module handling distribution and protection. Switches are programmable for steady On\/Off, momentary output, or flash\/strobe patterns, and external triggers let other vehicle systems activate outputs automatically.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEight programmable switches for On\/Off, momentary, flash, or strobe modes\u003c\/li\u003e\n  \u003cli\u003eTwo external trigger inputs, each can activate up to four outputs\u003c\/li\u003e\n  \u003cli\u003eMaster mode to turn multiple outputs on and off with one touch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the electrical and durability specs I should know?\u003c\/h3\u003e\n\u003cp\u003eThe power module is solid-state and waterproof, rated to a combined 125A with four outputs at 35A and four at 18A, making it suitable for high-current accessories without bulky relays. Color-coded wiring and LED input status indicators simplify diagnostics during installation and service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e125A maximum system rating; four 35A and four 18A outputs\u003c\/li\u003e\n  \u003cli\u003eWaterproof power module with solid-state design (no fuses\/relay box)\u003c\/li\u003e\n  \u003cli\u003eColor-coded wiring and LED status indicators for easier troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I customize lighting, labeling, and behavior?\u003c\/h3\u003e\n\u003cp\u003eRGB backlighting lets you match the panel to factory dash lighting using the companion smartphone app’s color picker, and 100 user-selectable legends allow clear labeling of each switch. Outputs for lighting can dim between 100% and 10% and can even dim during flash or strobe sequences for more nuanced control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRGB backlighting with unlimited color options via the free app\u003c\/li\u003e\n  \u003cli\u003e100 user-selectable switch legends for clear identification\u003c\/li\u003e\n  \u003cli\u003eDimming available 100%–10%, including during flash\/strobe patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectivity and convenience features are included?\u003c\/h3\u003e\n\u003cp\u003eThe SP-9100 includes a built-in Bluetooth module and a free Apple\/Android app for programming and monitoring, including a battery voltage readout on the app screen. Panels can be daisy-chained—up to three switch panels can share one power module—helping keep dash layouts tidy and scalable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in Bluetooth and free app for configuration and monitoring\u003c\/li\u003e\n  \u003cli\u003eBattery voltage display on the app for quick system checks\u003c\/li\u003e\n  \u003cli\u003eDaisy-chain capability: up to three panels per power module\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThe Switch-Pros SP-9100 is aimed at vehicle owners, fleet technicians, and aftermarket installers who need a tidy, programmable solution for multiple accessories—off-road lighting, auxiliary pumps, compressors, or other 12V devices—without sacrificing dash aesthetics or functionality. Its waterproof power module and solid-state design suit outdoor and work vehicles, while RGB backlighting and app control appeal to users who want a modern, customized cockpit experience.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I connect multiple panels to one power module?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. You can daisy-chain up to three SP-9100 switch panels to a single power module for expanded control.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the system require fuses or external relays?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The SP-9100 uses a waterproof solid-state power module and eliminates the need for fuses or bulky relay boxes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Switch-Pros","offers":[{"title":"Default Title","offer_id":67585482457273,"sku":"B079B2FX1H","price":1404.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/switch-pros-sp-9100-front-panel.jpg?v=1790471306"},{"product_id":"misakomo-ignition-lock-cylinder-starter-switch-kit-924-713-complete-replacement-with-2-keys-for-2000-2007-gm-trucks-suvs","title":"Misakomo Ignition Lock Cylinder \u0026 Starter Switch Kit 924-713 – Complete Replacement with 2 Keys for 2000–2007 GM Trucks\/SUVs","description":"\u003cp\u003e\u003cstrong\u003eThe Misakomo 924-713 Lock Cylinder Switch \u0026amp; Housing \u0026amp; Starter Switch Ignition Kit is a complete replacement set designed to restore ignition function on compatible GM trucks and SUVs by replacing the worn lock housing, lock cylinder switch, starter switch and keys.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle’s key won’t turn, the steering column feels jammed, or the starter doesn’t engage reliably, this kit provides the commonly failed parts in one package so you can return ignition control to normal. The set is manufactured from durable metal components, comes with two keys and an instruction sheet, and matches original-equipment fit for many Chevy, GMC, Cadillac and Buick models from the early 2000s.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and OE numbers does this Misakomo kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is intended as a direct replacement for many GM vehicles from about 2000–2007. It replaces specific OE part numbers for the lock housing, ignition switch and starter switch so installers can verify fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include Chevy Silverado\/Sierra (1500\/2500\/3500) years 2000–2007, Tahoe\/Suburban 2000–2006, TrailBlazer 2002–2009, Avalanche 2002–2006 and more.\u003c\/li\u003e\n  \u003cli\u003eAlso fits Cadillac Escalade and Escalade EXT\/ESV (2002–2006), Buick Rainier (2004–2007), GMC Yukon\/Yukon XL, Envoy, Jimmy, Sonoma and Bravada in listed years.\u003c\/li\u003e\n  \u003cli\u003eOE numbers matched: ignition lock housing 924-713, 88965342, 26075081, 26093782; ignition switch US-312L, D1469G; starter\/ignition switch numbers include 924-715 and others for cross-reference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this kit restore my vehicle’s ignition performance?\u003c\/h3\u003e\n\u003cp\u003eThe kit replaces the mechanical lock housing and electrical starter\/ignition switches that commonly wear and cause key-turn or starting issues. Putting in fresh parts resolves loose or seized key operation and unreliable starter activation while preserving original key coding when applicable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes a new ignition lock housing that corrects worn tumblers and binding in the column.\u003c\/li\u003e\n  \u003cli\u003eSupplies a replacement starter\/ignition switch for reliable electrical engagement.\u003c\/li\u003e\n  \u003cli\u003eComes with two keys for immediate use and replacement of lost sets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and what tools are needed for installation?\u003c\/h3\u003e\n\u003cp\u003eThe package is prepared with the components needed for a typical steering-column ignition swap and an instruction sheet to guide the DIY installer. Some disassembly tools are required; a steering-wheel puller and a lock plate remover (modified as explained) are commonly used to access the housing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 ignition lock housing, 1 lock cylinder switch, 1 starter switch, 2 keys and an instruction sheet.\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: steering wheel puller, lock plate tool (may need slight bending to work), socket set and trim tools.\u003c\/li\u003e\n  \u003cli\u003eInstallation note: basic mechanical skill recommended; professional installation available if you’re uncomfortable with column disassembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this replacement compared to the original equipment?\u003c\/h3\u003e\n\u003cp\u003eMisakomo builds this kit from high-quality metal components that undergo fit and function checks to extend service life beyond a failing original. While lifespan varies by use and environment, these parts are designed for reliable mechanical action and consistent electrical switching.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal construction for improved wear resistance in the lock housing and switches.\u003c\/li\u003e\n  \u003cli\u003eVehicle try-on testing to ensure responsive ignition action and correct fitment.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 36-month warranty for manufacturing defects and quality assurance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Misakomo ignition kit is aimed at owners and technicians working on early-2000s GM trucks and SUVs who need a full column ignition replacement — especially when keys won’t turn, the starter is intermittent, or the original lock housing is worn. It suits DIY mechanics with common disassembly tools as well as shops needing a reliable OE-replacement assembly with keys included.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include keys?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes two keys so you can start your vehicle immediately after installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is professional installation required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A competent DIYer can install it with a steering wheel puller; professional installation is recommended if unfamiliar with column disassembly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Misakomo","offers":[{"title":"Default Title","offer_id":67585486717113,"sku":"B0BPRR87FQ","price":198.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/misakomo-front-packaging-ignition-kit.jpg?v=1790471519"},{"product_id":"dorman-accelerator-pedal-sensor-699-199-direct-fit-plug-and-play-for-acura-honda-restores-throttle-response","title":"Dorman Accelerator Pedal Sensor 699-199 — Direct-Fit Plug-and-Play for Acura \u0026 Honda, Restores Throttle Response","description":"\u003cp\u003e\u003cstrong\u003eThe Dorman 699-199 Accelerator Pedal Sensor is a direct-fit replacement sensor that restores throttle position feedback for compatible Acura and Honda vehicles without the need for reprogramming.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle is showing reduced throttle response, an engine warning light, or inconsistent idle and you’ve traced the problem to a faulty accelerator pedal position sensor (APP), this replacement from Dorman offers an affordable, reliable option. Engineered to match the fit and electrical function of the original part, this unit is built from durable materials and tested for long-term performance. It’s supplied as a vehicle-specific plug-and-play module so most drivers can swap it in without specialized tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor restore throttle control?\u003c\/h3\u003e\n\u003cp\u003eThe APP sensor measures pedal position and converts it to an electrical signal the engine control module uses to regulate throttle and fuel delivery. Replacing a damaged or erratic sensor re-establishes accurate pedal-to-engine communication, improving drivability and eliminating certain diagnostic trouble codes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement design matches OEM mounting and electrical connectors.\u003c\/li\u003e\n  \u003cli\u003eRestores precise voltage signals for throttle control and idle management.\u003c\/li\u003e\n  \u003cli\u003eHelps clear related trouble codes when the sensor was the fault source.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this easy to install — do I need special tools or programming?\u003c\/h3\u003e\n\u003cp\u003eThe Dorman 699-199 is designed for plug-and-play installation on listed models, so in most cases no dealer programming or advanced tools are required. Basic hand tools and a careful procedure are all that’s typically needed to remove the old sensor and install the new one.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle-specific fit reduces adjustment or modification needs.\u003c\/li\u003e\n  \u003cli\u003eStandard electrical connector snaps into place with factory mounting points.\u003c\/li\u003e\n  \u003cli\u003eNo special calibration required for the majority of listed Acura and Honda years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles does this part fit and how can I confirm compatibility?\u003c\/h3\u003e\n\u003cp\u003eThis part is intended for a range of Acura and Honda models across mid-2000s model years. To avoid installation issues, verify fitment by entering your vehicle’s exact make, model, year, and trim into the parts lookup or Garage tool before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAcura: MDX (2003–2006), TL (2004–2008), TSX (2004–2008).\u003c\/li\u003e\n  \u003cli\u003eHonda: Accord (2003–2007), CR-V (2005–2006), Element (2007–2011).\u003c\/li\u003e\n  \u003cli\u003eHonda continued: Pilot (2005–2008), Ridgeline (2006–2014).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the quality and durability features of this replacement sensor?\u003c\/h3\u003e\n\u003cp\u003eDorman engineers these sensors in North America using materials chosen for durability and electrical stability. Each unit undergoes functional testing to ensure it provides consistent output and resists premature wear from under-dash environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured and tested to meet vehicle-specific performance expectations.\u003c\/li\u003e\n  \u003cli\u003eRobust housing and connector design to resist vibration and moisture exposure.\u003c\/li\u003e\n  \u003cli\u003eDesigned to match original sensor electrical characteristics for reliable operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Dorman 699-199 Accelerator Pedal Sensor is aimed at owners and technicians working on compatible Acura and Honda vehicles who need a dependable, cost-effective replacement for a failing APP sensor. It’s a practical choice for DIY installers familiar with basic under-dash service, independent shops looking for a quality aftermarket alternative, and fleet managers needing a proven, vehicle-specific part to reduce downtime. Always confirm exact fitment with your vehicle details prior to ordering to ensure seamless installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need dealer programming after installing this sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installations are plug-and-play and do not require dealer programming. Verify compatibility with your vehicle and follow the manufacturer’s installation steps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which years and models does the Dorman 699-199 fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits select Acura (MDX, TL, TSX) and Honda (Accord, CR-V, Element, Pilot, Ridgeline) model years listed in the product fitment. Check your exact year and trim.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":67585600979129,"sku":"B085HH72WR","price":201.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dorman-699-199-front-view.jpg?v=1790473836"},{"product_id":"vahaha-fuel-tank-sending-unit-replacement-for-ford-f-250-f-350-1999-2003-7-3l-direct-fit-corrosion-resistant-137-158-172-in","title":"Vahaha Fuel Tank Sending Unit Replacement for Ford F-250\/F-350 1999–2003 7.3L — Direct-Fit, Corrosion-Resistant (137\/158\/172 in)","description":"\u003cp\u003e\u003cstrong\u003eVahaha Fuel Tank Sending Unit Replacement is a direct-fit fuel level sender for 1999–2003 Ford F-250 and F-350 Super Duty 7.3L diesel trucks that restores accurate fuel readings and dependable operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement sending unit is engineered to match original fitment and electrical connections for Ford Super Duty trucks with 137.0\", 158.0\", or 172.0\" wheelbases. Built from corrosion-resistant materials and precision components, the unit replaces worn or damaged senders to reduce erratic gauge readings and support reliable fuel system function. It carries multiple OEM cross-references (FG239A, PS175, F81Z9275AJ, 692-255) so you can confirm compatibility before installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this unit fits my 1999–2003 Ford Super Duty?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is determined by engine, model year, and wheelbase. This Vahaha sender fits 7.3L diesel F-250 and F-350 Super Duty trucks from 1999 through 2003 with 137.0\", 158.0\", or 172.0\" wheelbases. Confirm match by checking your original part number against the listed cross-references.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM numbers: FG239A, PS175, F81Z9275AJ, 692-255\u003c\/li\u003e\n  \u003cli\u003eApplies to 1999–2003 Ford F-250 and F-350 Super Duty 7.3L diesel\u003c\/li\u003e\n  \u003cli\u003eFits wheelbases: 137.0\", 158.0\", 172.0\"\u003c\/li\u003e\n  \u003cli\u003eVerify against your truck’s current sender or service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat improvements should I expect after installing this sender?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failing sender typically restores accurate fuel-level readings and prevents unexpected gauge fluctuations. The Vahaha unit is made with quality materials to resist tank vapors and moisture, which helps maintain consistent signal output to the dash gauge over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStabilized fuel gauge accuracy and fewer false low readings\u003c\/li\u003e\n  \u003cli\u003eDurable construction to resist corrosion and wear\u003c\/li\u003e\n  \u003cli\u003eDirect electrical fit to minimize wiring changes\u003c\/li\u003e\n  \u003cli\u003eSupports proper fuel pump performance by ensuring correct sender operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic mechanical skills and common tools; many owners can complete it with a jack and hand tools, but some models may be simpler with the tank lowered. Always disconnect the battery and relieve tank pressure before starting; consider professional help if you are not comfortable working with fuel-system components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: jack\/stands, wrenches, screwdrivers, fuel-line pliers\u003c\/li\u003e\n  \u003cli\u003eSafety: disconnect battery and work in a ventilated area\u003c\/li\u003e\n  \u003cli\u003eExpect to remove or lower the fuel tank on some wheelbase\/models\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs and gasket replacement recommendations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Vahaha fuel tank sending unit is for owners, mechanics, and restoration specialists who need a reliable, OEM-referenced replacement for 1999–2003 Ford F-250 and F-350 Super Duty 7.3L diesel trucks. It’s ideal if your dash gauge reads inconsistently, shows empty prematurely, or if you’re restoring original fuel system function. If you need fitment help, contact us to confirm compatibility before ordering; the product includes a two-year warranty for added assurance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sending unit match my truck’s OEM number?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It matches FG239A, PS175, F81Z9275AJ, and 692-255. Confirm your original part number before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation difficult for a home mechanic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic mechanical skills are usually sufficient, but tank removal may be required; follow safety steps and consider a shop if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Vahaha","offers":[{"title":"Default Title","offer_id":67585613136057,"sku":"B0D1FV6GTH","price":179.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vahaha-sender-front-assembly.jpg?v=1790474422"},{"product_id":"dacall-driver-power-seat-switch-for-2015-2019-chevy-gmc-oem-fit-plug-and-play","title":"Dacall Driver Power Seat Switch for 2015–2019 Chevy\/GMC — OEM Fit, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eReplacement driver-side power seat switch designed to restore full multi-directional seat adjustments on compatible 2015–2019 Chevy\/GMC vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the power seat controls on the driver side of your Chevy Silverado or a compatible GM vehicle have become unresponsive, loose, or physically broken, this Dacall replacement switch is built to match OEM form and function. It directly substitutes original part numbers 23247095 and 20914736, offering the same connectors, dimensions, and mounting points so installation is straightforward and reliable. The unit is molded from durable plastics with metal contact points to deliver consistent electrical conductivity and long-term wear resistance.\u003c\/p\u003e\n\n\u003ch3\u003eWill this switch fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThis driver-side switch fits a wide range of GM models built in the mid-to-late 2010s. Before ordering, verify the OEM number and confirm you need a front left\/driver-side unit. It is NOT compatible with right-side or rear-seat applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Chevy Silverado\/GMC Sierra 1500\/2500\/3500HD (2015–2019), Suburban (2015–2020), Tahoe (2015–2020), Corvette (2014–2019), Impala (2014), Yukon XL (2015–2020).\u003c\/li\u003e\n  \u003cli\u003eAlso fits select Buick and Cadillac models: LaCrosse, Escalade, ELR, CTS, ATS\/XTS (refer to years above).\u003c\/li\u003e\n  \u003cli\u003eDirect replacements for OEM part numbers 23247095 and 20914736.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is plug-and-play and intended for straightforward replacement of the existing driver-side control. The package includes one Dacall power seat switch and a small removal tool that simplifies prying out the old switch without damaging trim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo splicing or extra wiring required — uses existing factory connector.\u003c\/li\u003e\n  \u003cli\u003eIncludes a dedicated removal tool and one replacement switch in the box.\u003c\/li\u003e\n  \u003cli\u003eTypical install time: 10–30 minutes depending on access and experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the replacement feel and respond like the original?\u003c\/h3\u003e\n\u003cp\u003eThe Dacall switch is engineered to match the tactile feel and electrical response of the factory unit. Its precision internal contacts provide immediate feedback and reduce intermittent connections that cause delayed or unresponsive adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable plastic housing with corrosion-resistant metal contacts.\u003c\/li\u003e\n  \u003cli\u003eEngineered internal structure resists dust and light moisture.\u003c\/li\u003e\n  \u003cli\u003eMulti-directional control for forward\/back, height, and recline adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eConfirm that you need a front left (driver-side) switch and compare the OEM number printed on your old part. This product is a left-side unit only; ordering the wrong side will result in an incompatible replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify vehicle make, model, and year against the compatibility list above.\u003c\/li\u003e\n  \u003cli\u003eLocate and compare the OEM number (23247095 or 20914736) on your existing switch.\u003c\/li\u003e\n  \u003cli\u003eEnsure the connector and mounting tabs of your original match the photos or description.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Dacall driver-side power seat switch is intended for owners and DIY mechanics who drive compatible Chevy, GMC, Buick, or Cadillac models from the 2013–2020 era and need a cost-effective, OEM-form replacement. It suits motorists wanting a quick, reliable fix to restore full seat adjustability without professional servicing, and fleet or repair shops that require consistent-fit replacement parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this switch fit my 2017 Chevy Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Dacall driver-side switch fits 2015–2019 Silverado models. Confirm your seat uses OEM part 23247095 or 20914736.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s plug-and-play and includes a removal tool; typical install time is under 30 minutes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dacall","offers":[{"title":"Default Title","offer_id":67585687716025,"sku":"B0G3P4T3DK","price":156.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dacall-front-driver-side-switch-front-view.jpg?v=1790475482"},{"product_id":"usskyboy-replacement-relay-harness-for-atlas-2014-models-direct-fit-marine-grade","title":"USSKYBOY Replacement Relay Harness for Atlas 2014+ Models — Direct-Fit Marine-Grade","description":"\u003cp\u003e\u003cstrong\u003eThis USSKYBOY replacement relay harness restores reliable electrical switching for Atlas hydraulic jack plates (models 2014 and newer) so you can get your plate back to smooth, safe operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Atlas or Atlas Heavy Duty jack plate from 2014 onward shows intermittent up\/down relay response or you need a direct OEM-style replacement, this relay harness is built to match the original fit and function. Engineered for marine environments, the harness uses quality materials and factory-compatible connectors to provide a straightforward swap without cutting or custom wiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this harness solve my jack plate’s electrical problems?\u003c\/h3\u003e\n\u003cp\u003eThe relay harness replaces worn or corroded relay wiring that often causes slow movement, no response, or inconsistent operation. By restoring clean connections and a correct relay layout, it removes common electrical failure points so the jack plate responds as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement for Atlas and Atlas Heavy Duty 2014+ models\u003c\/li\u003e\n  \u003cli\u003eFactory-compatible connectors—no splicing required\u003c\/li\u003e\n  \u003cli\u003eDurable materials resist marine corrosion and vibration\u003c\/li\u003e\n  \u003cli\u003eSimplifies troubleshooting by replacing the relay assembly harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Atlas models will this wiring harness fit?\u003c\/h3\u003e\n\u003cp\u003eThis harness is specified for Atlas SERIES and Atlas HEAVY DUTY hydraulic jack plates produced in 2014 and later. It covers common sizes and both standard and B-series variants, making it a universal replacement across the listed model range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAtlas SERIES: AHJ-4V-DP through AHJ-14V-DP and B-series equivalents\u003c\/li\u003e\n  \u003cli\u003eAtlas HEAVY DUTY: AHJ-4VHD-DP through AHJ-14VHD-DP and B-series equivalents\u003c\/li\u003e\n  \u003cli\u003eWorks for multiple voltages and plate sizes within the listed families\u003c\/li\u003e\n  \u003cli\u003ePart replaces AHJRELAYKIT-2-DP style harnesses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what tools do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is generally straightforward for anyone comfortable with basic boat electrical work. The harness uses matching plugs and mounting points; typical installation only requires hand tools and basic wiring checks. If you prefer, a marine mechanic can complete the swap quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connectors minimize cutting or soldering\u003c\/li\u003e\n  \u003cli\u003eBasic tools: screwdrivers, pliers, socket set, multimeter recommended\u003c\/li\u003e\n  \u003cli\u003eAllow time to inspect terminals and secure harness routing during install\u003c\/li\u003e\n  \u003cli\u003eProfessional installation available if you want factory-level assurance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does this harness include?\u003c\/h3\u003e\n\u003cp\u003eThe harness is built for the saltwater environment with corrosion-resistant terminals and robust sheathing to withstand vibration, UV exposure, and moisture. That durability helps extend service life compared with degraded original wiring, reducing repeat repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality insulation and marine-grade connectors\u003c\/li\u003e\n  \u003cli\u003eDesigned for vibration and movement typical on outboard jack plates\u003c\/li\u003e\n  \u003cli\u003eProtective routing and strain relief at connection points\u003c\/li\u003e\n  \u003cli\u003eMeets practical longevity expectations for onboard electrical parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this replacement harness for? Boat owners, marine technicians, and service shops that operate or maintain Atlas and Atlas Heavy Duty hydraulic jack plates from 2014 onward will find this USSKYBOY relay harness a direct, cost-effective replacement. It’s ideal when the original harness shows wear, intermittent relay action, or corrosion—and for anyone who prefers a clean plug-and-play swap rather than custom rewiring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this harness require splicing to fit my Atlas jack plate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the USSKYBOY harness uses factory-compatible connectors for plug-and-play replacement on the listed Atlas models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this harness myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — installation is straightforward with basic hand tools, though a marine technician can fit it if you prefer professional installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"USSKYBOY","offers":[{"title":"Default Title","offer_id":67585907491001,"sku":"B0C8TG6FV8","price":115.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/usskyboy-harness-front-packaging.jpg?v=1790479740"},{"product_id":"performance-tool-self-powered-timing-light-w80578-xenon-strobe-detachable-inductive-pickup-built-in-work-lamp","title":"Performance Tool self-powered timing light W80578 — xenon strobe, detachable inductive pickup, built-in work lamp","description":"\u003cp\u003e\u003cstrong\u003eThe Performance Tool W80578 is a self-powered timing light with a bright xenon flash and a detachable inductive pick-up for fast, accurate ignition timing checks on gas engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, self-contained timing light puts a daylight-visible xenon strobe and a built-in work lamp into one handheld tool. Designed for a wide range of gasoline-powered equipment—from motorcycles and lawn tractors to snowmobiles and small engines—the W80578 removes the need for external batteries or clamps. Its removable inductive pickup works with magnetos and coil wires, while rugged construction helps handle shop and field use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the xenon bulb improve timing checks?\u003c\/h3\u003e\n\u003cp\u003eThe xenon bulb produces a high-intensity flash that stays visible even in bright daylight, making it easier to see timing marks without darkening the work area. Faster, clearer flashes reduce eye strain and speed diagnosis.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuper-bright xenon strobe for daylight visibility.\u003c\/li\u003e\n  \u003cli\u003eSharp, brief flashes that freeze timing marks accurately.\u003c\/li\u003e\n  \u003cli\u003eConsistent output for repeatable readings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the unit self-powered and how does that help me?\u003c\/h3\u003e\n\u003cp\u003eThe W80578 integrates its power system into the housing, eliminating battery leads or external clamps. That means fewer cables to manage and immediate readiness at the workbench or roadside.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo separate battery clips—clean, portable setup.\u003c\/li\u003e\n  \u003cli\u003eQuick deployment for field or shop diagnostics.\u003c\/li\u003e\n  \u003cli\u003eLower risk of lost accessories versus tethered power packs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this timing light handle different engines and ignition types?\u003c\/h3\u003e\n\u003cp\u003eYes—this model is built to work across many gasoline engines, including small motors and outdoor power equipment. The detachable inductive pick-up is compatible with magnetos and standard coil wires for flexible connection options.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with motorcycles, mowers, snowmobiles, tractors, and more.\u003c\/li\u003e\n  \u003cli\u003eDetachable inductive pick-up hooks around ignition leads or magneto points.\u003c\/li\u003e\n  \u003cli\u003eSuitable for both professional mechanics and DIY troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the built-in work light help during repairs?\u003c\/h3\u003e\n\u003cp\u003eThe integrated work light brightens the immediate area, aiding inspections and accessory placement in low-light conditions. It reduces the need to hold a flashlight or reposition shop lighting while aligning timing marks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIlluminates engine bay for clearer visibility.\u003c\/li\u003e\n  \u003cli\u003eHands-free lighting combined with timing function.\u003c\/li\u003e\n  \u003cli\u003eHelps inspect wires, connectors, and timing marks simultaneously.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Performance Tool W80578 suits mechanics, small-engine technicians, and DIY owners who service gasoline-powered equipment and need a reliable, portable timing solution. It’s ideal when quick, daylight-visible timing checks are required without hauling extra power supplies, and for anyone who benefits from a combined timing strobe and work lamp in one durable tool.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the W80578 need external batteries or clamps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the W80578 is self-powered with an internal power system and requires no external battery clamps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the inductive pick-up work with magnetos?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the detachable inductive pick-up is compatible with magnetos and standard ignition coil wires.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Performance Tool","offers":[{"title":"Default Title","offer_id":67586223571129,"sku":"B002KS72GA","price":124.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/performance-tool-w80578-front-view.jpg?v=1790481099"},{"product_id":"dihool-200a-dc-circuit-breaker-500v-2-pole-front-access-battery-disconnect-with-thermal-magnetic-protection","title":"DIHOOL 200A DC Circuit Breaker 500V — 2‑Pole Front‑Access Battery Disconnect with Thermal‑Magnetic Protection","description":"\u003cp\u003e\u003cstrong\u003eDIHOOL 200 Amp DC Breaker is a front-accessible 2-pole battery disconnect and thermal-magnetic protection switch rated to 500V for solar, UPS, datacenter and battery bank systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact DC circuit breaker combines thermal-magnetic trip technology with a front-accessible mounting design so you can both protect and isolate high-current DC circuits quickly. Built for PV arrays, battery banks, uninterruptible power supplies and power stations, the unit interrupts overloads and short circuits while offering simple installation in compartments where space and accessibility matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this breaker protect my DC system?\u003c\/h3\u003e\n\u003cp\u003eThe DIHOOL breaker uses a thermal-magnetic trip mechanism to respond to sustained overloads and abrupt short-circuit events. Thermal elements handle prolonged overcurrent, while the magnetic section trips instantly on high fault currents, preventing equipment damage and wiring failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e200 A continuous rating with instantaneous magnetic trip for high fault currents\u003c\/li\u003e\n  \u003cli\u003e500 V DC insulation and switching capability for battery and PV applications\u003c\/li\u003e\n  \u003cli\u003eTwo-pole design isolates both positive and negative conductors for full circuit protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it easy to install and access in cramped panels?\u003c\/h3\u003e\n\u003cp\u003eYes — the breaker is sized and configured for front access and straightforward wiring in compact enclosures. The front-access terminals and panel-mountable form factor let you service and operate the switch without removing cabinetry or other components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront-accessible terminal layout speeds maintenance and inspection\u003c\/li\u003e\n  \u003cli\u003eCompact 2P dimensions: 65 mm x 150 mm x 69 mm fit tight compartments\u003c\/li\u003e\n  \u003cli\u003eMounting compatible with common DC combiner boxes and distribution panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich systems and scenarios is this switch best suited for?\u003c\/h3\u003e\n\u003cp\u003eDesigned for direct-current environments, this breaker is ideal wherever batteries, photovoltaic arrays, UPS strings or power stations require reliable overcurrent protection and a means to isolate the main feed. It works well in both residential and commercial installations where DC protection is required up to 500 V.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePhotovoltaic (PV) array protection and DC combiner outputs\u003c\/li\u003e\n  \u003cli\u003eBattery banks, power stations, and energy storage systems\u003c\/li\u003e\n  \u003cli\u003eUPS DC distribution and datacenter battery backups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical ratings and physical specs should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eConfirm system voltage, continuous current demands and the available short-circuit current so the 200 A\/500 V rating aligns with your design. Also verify enclosure space and terminal compatibility; the DIHOOL unit’s 65×150×69 mm footprint and two-pole configuration are optimized for many DC installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated current: 200 A continuous\u003c\/li\u003e\n  \u003cli\u003eMaximum DC voltage: 500 V\u003c\/li\u003e\n  \u003cli\u003ePhysical size: 65 mm × 150 mm × 69 mm, 2-pole package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Installers, system integrators and DIY professionals working on solar arrays, battery storage, UPS systems and power stations who need a reliable, compact DC breaker with thermal-magnetic trip behavior and front-access convenience. If you require a robust 200 A DC disconnect and overcurrent protector that fits tight spaces and isolates both conductors, this DIHOOL breaker is tailored for those applications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this breaker be used with a 48V battery bank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The DIHOOL 200A breaker supports DC systems up to 500V, so it is compatible with 48V battery banks when rated current is within 200A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it isolate both DC conductors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The two-pole design disconnects and protects both positive and negative conductors for full circuit isolation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DIHOOL","offers":[{"title":"Default Title","offer_id":67586234679481,"sku":"B09P4QZLPY","price":125.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dihool-breaker-front-view.jpg?v=1790481346"},{"product_id":"blue-sea-systems-285-series-40a-surface-mount-circuit-breaker-trip-free-ignition-protected","title":"Blue Sea Systems 285-Series 40A Surface‑Mount Circuit Breaker — Trip‑Free, Ignition‑Protected","description":"\u003cp\u003e\u003cstrong\u003eBlue Sea Systems 285-Series 40A is a surface-mount, trip-free circuit breaker that doubles as a switch to protect and control 12V–24V marine equipment like windlasses and electric winches.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for boats and other small-vehicle electrical systems, this medium-duty circuit breaker integrates switching and overcurrent protection in a single, compact package. It features a visible lever that indicates a trip condition, ignition protection for safe engine-room installation, and water resistance for marine environments. Terminal studs are positioned on the face for straightforward wiring, and protective terminal caps reduce the risk of accidental contact and shorting.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 285-Series 40A breaker protect my windlass or winch?\u003c\/h3\u003e\n\u003cp\u003eThe 285-Series acts as both a switch and a resettable overcurrent protector. If the circuit draws excessive current, the trip-free mechanism forces the breaker to open and prevents holding it closed, which avoids overheating and wiring damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrip-free design prevents manual overriding during a fault\u003c\/li\u003e\n  \u003cli\u003eVisible lever shows a tripped condition for easy troubleshooting\u003c\/li\u003e\n  \u003cli\u003e40 amp rating suited to many medium-duty anchor or deck gear\u003c\/li\u003e\n  \u003cli\u003eResettable on-board — no fuse replacements required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere can I install this breaker on my boat?\u003c\/h3\u003e\n\u003cp\u003eThis surface-mount breaker is water resistant and ignition protected, so it can be installed in many onboard locations, including engine compartments of gasoline-powered vessels. Its face-mounted terminal studs and compact footprint make it simple to mount to bulkheads, consoles, or switch panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApproved for engine-room mounting where ignition protection is required\u003c\/li\u003e\n  \u003cli\u003eSurface-mount design fits bulkheads and flat panels\u003c\/li\u003e\n  \u003cli\u003eTerminal caps protect against accidental contact and shorts\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant materials suited to marine exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I wire and maintain the 40A 285-Series breaker?\u003c\/h3\u003e\n\u003cp\u003eWiring is straightforward: secure the positive feed and load to the face-mounted studs, torque per manufacturer specs, and fit the terminal caps. Routine visual checks of the lever, caps, and mounting ensure continued operation; replace if corrosion or mechanical damage appears.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFace studs simplify cable routing and reduce installation time\u003c\/li\u003e\n  \u003cli\u003eUse appropriate ring terminals and rated cable for 40A circuits\u003c\/li\u003e\n  \u003cli\u003eInspect lever, caps, and mounting periodically for wear\u003c\/li\u003e\n  \u003cli\u003eFive-year warranty offers long-term coverage against defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose this model over other circuit protection options?\u003c\/h3\u003e\n\u003cp\u003eThis breaker replaces conventional fuses and separate switches by combining both functions into a single device, reducing panel complexity. It is a drop-in upgrade from the older 185 series and offers the safety benefit of a trip-free mechanism plus ignition protection for gasoline engine areas.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCombines switch and circuit protection to streamline installations\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for 185-series breakers for easy upgrades\u003c\/li\u003e\n  \u003cli\u003eTrip-free feature enhances safety under fault conditions\u003c\/li\u003e\n  \u003cli\u003eIgnition-protected for engine-room compatibility on boats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Blue Sea Systems 285-Series 40A breaker is aimed at boat owners, marine electricians, and installers specifying reliable medium-duty circuit protection for anchor windlasses, electric winches, and similar 12V–24V loads. It suits anyone seeking an integrated switch-and-protection solution with clear trip indication, simple installation, and the durability required for marine environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 285-Series 40A breaker safe to install in engine compartments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is ignition protected and water resistant, making it suitable for gasoline engine rooms per manufacturer guidelines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this replace the older 185-Series breakers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 285-Series is a drop-in replacement for 185-Series breakers and provides the same mounting and terminal layout.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":67586234646713,"sku":"B005168AOG","price":142.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blue-sea-285-series-front-face_de03f3de-e511-46be-a556-9875a905d7cc.jpg?v=1790481343"},{"product_id":"blue-sea-systems-285-series-surface-mount-circuit-breaker-70a-ignition-protected-trip-free","title":"Blue Sea Systems 285-Series Surface-Mount Circuit Breaker 70A — Ignition-Protected, Trip-Free","description":"\u003cp\u003e\u003cstrong\u003eThe Blue Sea Systems 285-Series 70A surface-mount breaker is a combined switch and medium-duty circuit protector designed for windlasses, electric winches and marine installations where ignition protection and easy surface mounting are required.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis single-unit device replaces a separate on\/off switch and fuse by combining both functions: it operates as a manual switch while providing engineered overcurrent protection with a visible trip lever. Built for marine environments, the 285-Series is water resistant and ignition protected so it can be installed in engine compartments of gasoline-powered craft. Terminal studs on the face simplify wiring and the connected terminal caps reduce accidental contact and cross-current shorts during installation and service.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this breaker protect my windlass or winch without a separate fuse?\u003c\/h3\u003e\n\n\u003cp\u003eThe 285-Series integrates switching and overload protection so you control power and protect the circuit with one device. Its Trip-Free mechanism forces the breaker to open if a fault occurs and prevents it from being held closed under overload. A clear, visible lever indicates whether the breaker has tripped, making fault diagnosis faster.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e70 amp continuous rating suitable for many medium-duty windlass and winch motors\u003c\/li\u003e\n  \u003cli\u003eTrip-Free action prevents manual override during faults\u003c\/li\u003e\n  \u003cli\u003eVisible lever shows tripped\/open condition at a glance\u003c\/li\u003e\n  \u003cli\u003eFace-mounted studs simplify wire routing and mounting on bulkheads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I mount this breaker in an engine room on a gasoline-powered boat?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the 285-Series is ignition protected, so it meets the safety requirements for installation in gasoline engine compartments. Its water-resistant housing tolerates typical marine spray and humidity, though it is not intended for continuous submersion. Connected terminal caps add an extra layer of protection against accidental contact and shorts in tight engine-room installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIgnition-protected construction for gasoline-engine spaces\u003c\/li\u003e\n  \u003cli\u003eWater-resistant housing for exposed marine environments\u003c\/li\u003e\n  \u003cli\u003eTerminal caps help prevent accidental contact and shorts\u003c\/li\u003e\n  \u003cli\u003eSurface-mount design allows flexible placement near loads or batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the 285-Series easy to install and maintain?\u003c\/h3\u003e\n\n\u003cp\u003eThe breaker’s terminals are located on the face, so you can wire it without access to the rear — ideal for bulkhead or panel mounting. It drops in as a replacement for the older 185 series, minimizing retrofit work. The visible lever simplifies troubleshooting and the robust mechanical construction supports repetitive operation in demanding marine service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFace-mounted studs for straightforward ring-terminal connections\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for 185-Series breakers to ease upgrades\u003c\/li\u003e\n  \u003cli\u003eAttached terminal caps reduce installation errors and improve safety\u003c\/li\u003e\n  \u003cli\u003eDurable design backed by a five-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the breaker behave during an overload or fault?\u003c\/h3\u003e\n\n\u003cp\u003eWhen the protected circuit draws excessive current, the breaker trips open automatically and the lever pops to indicate the fault. Because it is Trip-Free, you cannot force it back into the ON position while the fault condition persists, preventing further damage. After correcting the cause of the overload, the breaker can be manually reset.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic trip on overload with visible lever indication\u003c\/li\u003e\n  \u003cli\u003eTrip-Free feature prevents manual bypass during faults\u003c\/li\u003e\n  \u003cli\u003eManual reset after fault correction for simple service restoration\u003c\/li\u003e\n  \u003cli\u003eDesigned for repeated trips typical of windlass and winch use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Blue Sea Systems 285-Series 70A surface-mount breaker is aimed at boat owners, installers and marine electricians who need a reliable, compact circuit protector that also serves as a switch. It is particularly well suited to windlass and electric winch circuits, retrofit projects replacing older 185-Series breakers, and applications where ignition protection and surface mounting are required. Its combination of clear trip indication, face-mounted terminals, terminal caps and a five-year warranty make it a practical choice for demanding marine electrical systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 285-Series suitable for engine compartments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The breaker is ignition protected and water resistant, allowing installation in gasoline engine rooms.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this replace a 185-Series breaker?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 285-Series is a drop-in replacement for 185-Series breakers and uses the same mounting footprint.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":67586234581177,"sku":"B005CRV794","price":143.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blue-sea-285-series-front-panel.jpg?v=1790481341"},{"product_id":"blue-sea-systems-285-series-150a-surface-mount-circuit-breaker-trip-free-ignition-protected-with-visible-trip-indicator","title":"Blue Sea Systems 285-Series 150A Surface-Mount Circuit Breaker — Trip-Free, Ignition-Protected with Visible Trip Indicator","description":"\u003cp\u003e\u003cstrong\u003eThe Blue Sea Systems 285-Series 150A surface-mount breaker is a combined switch and medium-duty circuit protector engineered for windlasses, electric winches and other heavy DC loads.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis surface-mount circuit breaker serves as both a manual switch and a trip-protective device designed for marine and mobile electrical systems. It replaces the 185-series unit and adds visual trip indication, ignition protection for installation in gasoline engine rooms, and covered terminal caps to reduce the chance of accidental contact. The face-mounted studs simplify wiring and make panel or bulkhead mounting straightforward.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this breaker protect my windlass or electric winch?\u003c\/h3\u003e\n\u003cp\u003eThe 285-Series interrupts excessive current by tripping open when a fault occurs, while the visible lever clearly shows when the breaker has tripped. Because it’s a trip-free design, the mechanism prevents holding the breaker ON during an overload, ensuring the circuit stays open until the fault is cleared and the breaker is reset.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e150A rating matched to common heavy DC motor loads\u003c\/li\u003e\n  \u003cli\u003eTrip-free mechanism prevents manual override during faults\u003c\/li\u003e\n  \u003cli\u003eVisible lever indicates tripped\/open condition instantly\u003c\/li\u003e\n  \u003cli\u003eFunctionally replaces 185-series units for easy upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere can I mount this 285-Series breaker and what installation features help?\u003c\/h3\u003e\n\u003cp\u003eThis breaker is surface-mounted and uses face-located terminal studs to make wiring and access easy during installation. It is water resistant and ignition protected, allowing placement in many locations, including gasoline engine compartments where ignition protection is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface-mount footprint for bulkhead or panel installations\u003c\/li\u003e\n  \u003cli\u003eFace-mounted studs speed up terminal connections and inspection\u003c\/li\u003e\n  \u003cli\u003eTerminal caps protect against accidental contact and shorts\u003c\/li\u003e\n  \u003cli\u003eWater resistance and ignition protection broaden mounting options\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or operational checks should I perform?\u003c\/h3\u003e\n\u003cp\u003ePeriodic inspection of terminals, lever condition and mounting hardware keeps the breaker reliable. Clean, tight connections and intact terminal caps reduce corrosion and accidental shorts; test operation by switching and verifying the visible lever moves freely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck tightness of terminal studs and inspect for corrosion\u003c\/li\u003e\n  \u003cli\u003eVerify terminal caps are secure and undamaged\u003c\/li\u003e\n  \u003cli\u003eExercise the switch and confirm lever trips under test load conditions\u003c\/li\u003e\n  \u003cli\u003eFollow vessel electrical maintenance schedules and manufacturer guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and replacement compatibility does this model offer?\u003c\/h3\u003e\n\u003cp\u003eThe 285-Series includes a five-year warranty backing the component against manufacturing defects under normal use. It’s designed as a drop-in replacement for the older 185-series so you can upgrade without changing mounting locations or major wiring layouts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFive-year manufacturer warranty included\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for 185-series breakers for easy swaps\u003c\/li\u003e\n  \u003cli\u003eDesigned for medium-duty DC applications such as windlasses and winches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Blue Sea Systems 285-Series 150A surface-mount breaker is for boat owners, marine electricians, and anyone installing or servicing medium-duty DC motor loads like windlasses, electric winches, or anchoring systems. Choose this model when you need a sturdy, ignition-protected, water-resistant switch that also provides reliable trip protection and simple installation on bulkheads or panels.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 285-Series safe to install in an engine room?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is ignition protected and water resistant, suitable for many gasoline engine compartments when installed per instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the 285-Series replace my 185-series breaker?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 285-Series is a drop-in replacement for the 185-series and fits the same mounting and wiring layouts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":67586234777785,"sku":"B0051OWRHE","price":150.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blue-sea-285-series-front-face.jpg?v=1790481342"},{"product_id":"blue-sea-systems-7188-285-series-thermal-circuit-breaker-48v-dc-120a-surface-mount-trip-free","title":"Blue Sea Systems 7188 285-Series Thermal Circuit Breaker — 48V DC, 120A Surface-Mount Trip-Free","description":"\u003cp\u003e\u003cstrong\u003eBlue Sea Systems 7188 is a surface-mount thermal circuit breaker that combines a manual switch with automatic trip protection for 48V DC circuits up to 120A.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis compact medium-duty breaker is designed for marine and industrial use where a reliable, visible, and resettable protection device is needed. It replaces older 185-series breakers, mounts on a flat surface with terminals on the face for straightforward wiring, and features a Trip-Free mechanism so the breaker cannot be forced ON when a fault exists. The unit is water resistant and ignition protected, making it suitable for installation in gasoline engine compartments and other challenging environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this breaker serve as both a switch and circuit protector?\u003c\/h3\u003e\n\u003cp\u003eThe 7188 functions as a manual on\/off switch for routine control while automatically opening the circuit if overload or short conditions occur. Its visible lever indicates current status—ON, OFF, or TRIPPED—so you can quickly identify a fault without test equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManual push-pull lever for normal switching\u003c\/li\u003e\n  \u003cli\u003eAutomatic thermal trip reacts to sustained overloads\u003c\/li\u003e\n  \u003cli\u003eVisible tripped position for instant fault recognition\u003c\/li\u003e\n  \u003cli\u003eCannot be held ON during an active fault thanks to Trip-Free design\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere can I mount the 7188 and how is it connected?\u003c\/h3\u003e\n\u003cp\u003eThis breaker is surface mounted with terminal studs on the front face, simplifying wiring and allowing installation in tight or crowded panels. Terminal caps protect against accidental contact and reduce the chance of cross-current shorts during installation or maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface-mount design fits on flat panels or bulkheads\u003c\/li\u003e\n  \u003cli\u003eFace-located terminal studs speed up wiring and inspection\u003c\/li\u003e\n  \u003cli\u003eProtective terminal caps guard against accidental contact\u003c\/li\u003e\n  \u003cli\u003eWater resistant housing for damp or splash-prone locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this breaker suitable for engine rooms and marine environments?\u003c\/h3\u003e\n\u003cp\u003eYes — the 7188 is ignition protected and water resistant, enabling safe placement in gasoline engine compartments and wet locations commonly found on boats. While not fully submersible, its construction is intended to tolerate marine conditions and resist corrosion when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIgnition protected for gasoline engine compartments\u003c\/li\u003e\n  \u003cli\u003eWater-resistant design for marine use\u003c\/li\u003e\n  \u003cli\u003eDurable materials resist harsh operating conditions\u003c\/li\u003e\n  \u003cli\u003eFive-year warranty for long-term confidence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical ratings and replacement compatibility should I know about?\u003c\/h3\u003e\n\u003cp\u003eThe 7188 is rated for 48V DC systems and protects circuits up to 120 amps, making it suitable for medium-duty loads like windlasses and electric winches. It is a drop-in replacement for the earlier 185-series circuit breakers, simplifying upgrades without reworking panel layouts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for 48V DC applications\u003c\/li\u003e\n  \u003cli\u003e120A medium-duty trip rating\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for 185-series breakers\u003c\/li\u003e\n  \u003cli\u003eTrip-Free feature prevents manual override during faults\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Blue Sea Systems 7188 285 Series breaker is aimed at boat owners, marine electricians, and equipment installers needing a dependable, resettable circuit protector that doubles as a manual switch. It's ideal for controlling medium-duty DC loads such as windlasses, electric winches, lighting banks, and other systems where visible tripping, ignition protection, and straightforward surface mounting make installation and maintenance faster and safer.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the 7188 be installed in a gasoline engine compartment?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 7188 is ignition protected and water resistant, so it can be placed in gasoline engine rooms when installed according to instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 7188 a direct replacement for the 185 series?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This model is designed as a drop-in replacement for 185-series circuit breakers, matching mounting and terminal arrangements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":67586237399225,"sku":"B00511Q5MU","price":144.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/blue-sea-systems-7188-front-face-terminals.jpg?v=1790481407"},{"product_id":"stinger-200a-car-battery-isolator-heavy-duty-relay-sgp32-dual-battery-protection-moisture-resistant","title":"STINGER 200A Car Battery Isolator \u0026 Heavy-Duty Relay - SGP32, Dual-Battery Protection, Moisture-Resistant","description":"\u003cp\u003e\u003cstrong\u003eSTINGER SGP32 is a 200-amp 12V battery isolator and heavy-duty relay that routes charge to a secondary battery while protecting your primary battery from drain.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you run an aftermarket car stereo, auxiliary lighting, winch, or marine accessories, the SGP32 gives you a simple way to manage two-battery systems without complex wiring or manual switching. Built for continuous high-current use and housed in moisture-resistant phenolic plastic, this isolator combines robust electrical capacity with protection against environmental exposure for boats, powersports, off-road rigs, and daily drivers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SGP32 keep my starter battery from running flat?\u003c\/h3\u003e\n\u003cp\u003eThe isolator automatically separates the starter (primary) battery from the auxiliary battery when the engine is off, so accessories can draw from the secondary battery without draining the starter. When the alternator is charging, it allows current to flow to the secondary battery up to the unit’s rated capacity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic isolation prevents starter battery depletion when accessories run.\u003c\/li\u003e\n  \u003cli\u003eHandles continuous 200A draw with 500A surge capacity for transient loads.\u003c\/li\u003e\n  \u003cli\u003eWorks with any 12V charging system—no special alternator required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hold up to wet or rugged conditions?\u003c\/h3\u003e\n\u003cp\u003eThe SGP32 is built with phenolic plastic to resist moisture and provide electrical insulation, making it suitable for marine, powersports, and off-road installations. It’s designed to tolerate the vibration and environmental exposure common in these applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWater-resistant housing protects internal contacts and coil from moisture.\u003c\/li\u003e\n  \u003cli\u003eDurable construction resists vibration and frequent mechanical cycling.\u003c\/li\u003e\n  \u003cli\u003eCompact footprint simplifies mounting in constrained, protected areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical capacity and lifespan can I expect?\u003c\/h3\u003e\n\u003cp\u003eThis relay\/isolator transfers up to 200 amps continuously and accepts 500-amp surge events, suitable for heavy audio systems, lighting, and winches when wired appropriately. The mechanism is rated for roughly 100,000 mechanical cycles, giving long-term service life under normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous current rating: 200A for sustained loads.\u003c\/li\u003e\n  \u003cli\u003eSurge capacity: up to 500A to cope with inrush currents.\u003c\/li\u003e\n  \u003cli\u003eLong mechanical life reduces maintenance and replacement frequency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and integrate it with my vehicle’s charging system?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically involves wiring the isolator between the alternator\/primary battery and the auxiliary battery, using appropriately sized cable and secure terminals. Because the SGP32 is universally compatible with 12V systems, it does not require special alternator modification; follow standard electrical practices and fuse protection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount on a solid surface using accessible terminal orientation for cable routing.\u003c\/li\u003e\n  \u003cli\u003eUse heavy-gauge battery cable and fuse links sized to your system’s max current.\u003c\/li\u003e\n  \u003cli\u003eVerify connections and secure grounds; consult a professional if unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The STINGER SGP32 is aimed at hobbyists and professionals who need reliable two-battery management under heavy electrical load: car-audio installers, boat owners, off-road enthusiasts, and anyone adding high-draw accessories to a 12V vehicle. Choose the SGP32 when you want straightforward automatic isolation, strong continuous and surge current capacity, and a moisture-resistant housing for demanding environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the SGP32 work with any 12V alternator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The SGP32 is universally compatible with standard 12V alternators and charging systems without special alternator modification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a fuse with this isolator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Use appropriately rated fuses or fusible links sized to your maximum current to protect wiring and the isolator.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"STINGER","offers":[{"title":"Default Title","offer_id":67586423947449,"sku":"B001HBYXVS","price":156.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/stinger-sgp32-front-view.jpg?v=1790483270"},{"product_id":"atracypart-ac-climate-control-panel-for-1999-2002-chevy-gmc-cadillac-model-599-266-direct-fit-plug-and-play","title":"ATRACYPART AC Climate Control Panel for 1999-2002 Chevy\/GMC\/Cadillac - Model 599-266, Direct-Fit Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART AC Climate Control Panel model 599-266 is a direct-fit replacement control unit that restores temperature and vent control for compatible 1999–2002 Chevy, GMC and 2002 Cadillac trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your dash climate controls are unresponsive, showing erratic temperatures, or certain blower and mode selections no longer function, swapping in a properly matched control panel is often the fastest way to regain reliable HVAC operation. This ATRACYPART unit is built to match original equipment fit and function for a wide range of late‑1990s and early‑2000s GM trucks and SUVs, offering durable ABS construction and plug-and-play electrical connectors so installation is straightforward for experienced DIYers or professional technicians.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does this control panel fit?\u003c\/h3\u003e\n\u003cp\u003eThis replacement panel is compatible with many Chevy, GMC and Cadillac platforms from 1999 through 2002. Before purchasing, confirm your vehicle year and model against the full compatibility list to ensure the connector and mounting points match your dash.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevy: Avalanche (2002), Silverado (1999–2002), Suburban and Tahoe (2000–2002)\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra (1999–2002), Yukon XL (2000–2002)\u003c\/li\u003e\n  \u003cli\u003eCadillac: Escalade and Escalade EXT (2002)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this panel replace the original part and which OE numbers correspond?\u003c\/h3\u003e\n\u003cp\u003eThe unit is manufactured to work with the same wiring and mounting arrangement as the factory control module so it swaps into place without cutting wires. It lists multiple OE cross-reference numbers to help you confirm compatibility with your original equipment part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect cross-references include 599-266, 599266 and 15-72528\u003c\/li\u003e\n  \u003cli\u003eAdditional matches: 19244873, 15054697, 15753264 and more to cover various GM catalogs\u003c\/li\u003e\n  \u003cli\u003eDesigned for plug-and-play installation with stock harnesses and dash openings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and core features I should expect?\u003c\/h3\u003e\n\u003cp\u003eThis control panel is molded from high-grade ABS designed for interior durability and resistance to daily wear. The internal circuitry is engineered to regulate blower speeds, mode selection and temperature inputs, restoring control over cabin climate when the original module fails.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium ABS housing for long-lasting exterior finish and fit\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet original dimensions and connector pinouts\u003c\/li\u003e\n  \u003cli\u003eSupports blower, vent mode and temperature functions typical to the OEM unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and customer support come with this purchase?\u003c\/h3\u003e\n\u003cp\u003eATRACYPART stands behind the panel with a 12-month limited warranty covering manufacturing defects and functional failures under normal use. If you encounter installation questions or functional issues within the warranty period, ATRACYPART customer service offers assistance and replacement guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month warranty against defects in materials and workmanship\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment and troubleshooting assistance\u003c\/li\u003e\n  \u003cli\u003eReturn or replacement processes handled through ATRACYPART support channels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement AC climate control panel is best for owners and technicians working on late‑model GM trucks and SUVs from 1999 to 2002 who need an OEM-style, plug-in replacement to restore cabin temperature control. Choose this unit if your factory control is failing to change modes, regulate blower speed, or maintain consistent temperature and you want a drop-in part that aligns with original mounting and connector specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this panel directly replace the factory unit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This ATRACYPART 599-266 panel is built for plug-and-play replacement with matching connectors and mounting points for listed models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty is included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The product includes a 12-month limited warranty covering manufacturing defects and functional failures under normal use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":67586433220793,"sku":"B0CSRX7WBX","price":110.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/atracypart-front-panel-assembly.jpg?v=1790483469"},{"product_id":"dihool-300a-battery-disconnect-switch-dc-circuit-breaker-front-access-thermal-magnetic-protection","title":"DIHOOL 300A Battery Disconnect Switch DC Circuit Breaker — Front-Access, Thermal-Magnetic Protection","description":"\u003cp\u003e\u003cstrong\u003eDIHOOL's 300 Amp Heavy Duty Battery Disconnect Switch is a front-accessible DC circuit breaker that isolates and protects battery and solar power systems with thermal-magnetic trip technology.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for demanding DC environments—solar arrays, power stations, UPS banks and datacenters—this rugged 300A breaker combines overload and short-circuit protection with a clear, serviceable front-access layout. Its wide operating voltage and selectable short-circuit protection modes make it flexible for 12–400V systems, while the compact housing fits equipment compartments where space and accessibility matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this breaker protect my battery and solar systems?\u003c\/h3\u003e\n\u003cp\u003eThe DIHOOL unit uses thermal-magnetic trip mechanics to react to sustained overloads and sudden short circuits, limiting heat buildup and preventing wiring damage. It serves both as a protective device and a manual isolation switch for maintenance and emergency shutoff.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThermal trip responds to prolonged overload currents to prevent overheating.\u003c\/li\u003e\n  \u003cli\u003eMagnetic trip gives near-instant action on short-circuit events (when configured for higher voltages).\u003c\/li\u003e\n  \u003cli\u003eActs as a manual disconnect for safe maintenance and system isolation.\u003c\/li\u003e\n  \u003cli\u003eRated specifically for DC environments common to batteries and PV arrays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich voltages and protections are supported?\u003c\/h3\u003e\n\u003cp\u003eThe breaker supports two voltage-protection configurations: the lower-voltage mode (12–30V) provides overload isolation without short-circuit protection, while the higher-voltage mode (32–400V) includes integrated short-circuit protection. This lets you select the safest option for your application’s operating voltage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12V–30V: designed for battery banks and low-voltage DC systems without integrated short-circuit trip.\u003c\/li\u003e\n  \u003cli\u003e32V–400V: full thermal-magnetic protection including short-circuit interruption.\u003c\/li\u003e\n  \u003cli\u003e300 Amp continuous rating for heavy-duty DC circuits.\u003c\/li\u003e\n  \u003cli\u003eSuitable for photovoltaic arrays, power stations, UPS, and datacenter battery racks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and service the DIHOOL disconnect?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward with front-access terminals and a compact footprint that fits into equipment compartments and panels. The front-access design keeps fasteners and service points reachable without removing surrounding components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront-accessible wiring and mounting for quick installation and service.\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions (73 mm × 163 mm × 86 mm) for tight spaces.\u003c\/li\u003e\n  \u003cli\u003eClear mechanical disconnect handle for visible status and manual operation.\u003c\/li\u003e\n  \u003cli\u003eRobust housing built for repeated switching and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat systems and users benefit most from this breaker?\u003c\/h3\u003e\n\u003cp\u003eThis DIHOOL breaker is suited to anyone building or maintaining DC power systems that need reliable overcurrent protection and clear isolation points. It’s particularly useful for installers, technicians, and system designers working on solar installations, off-grid power stations, battery backup systems, and datacenter UPS arrays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolar PV installers needing a DC-rated protective disconnect with wide voltage range.\u003c\/li\u003e\n  \u003cli\u003ePower station and generator systems requiring heavy-duty battery isolation.\u003c\/li\u003e\n  \u003cli\u003eDatacenter and UPS technicians seeking dependable battery bank protection.\u003c\/li\u003e\n  \u003cli\u003eMaintenance crews who value front-access serviceability and clear disconnect operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DIHOOL Heavy Duty Battery Disconnect Switch is for professionals and advanced DIYers who need a robust, front-serviceable DC circuit breaker rated for up to 300A. If you operate battery banks, solar arrays, UPS equipment, or any DC distribution where reliable overload and short-circuit handling and straightforward isolation are essential, this unit is designed to fit into compact installations while delivering industrial-grade protection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this breaker suitable for 12V battery banks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it supports 12–30V operation with thermal overload protection (short-circuit protection not active in this lower-voltage mode).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it interrupt short circuits at 48V or higher?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — in the 32–400V configuration the thermal-magnetic mechanism includes short-circuit interruption capability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DIHOOL","offers":[{"title":"Default Title","offer_id":67586484273337,"sku":"B09P4RSPYY","price":146.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dihool-front-panel-installed.jpg?v=1790484510"},{"product_id":"motorcraft-glow-plug-switch-dy861-direct-fit-oem-replacement-corrosion-resistant","title":"Motorcraft Glow Plug Switch DY861 — Direct-Fit OEM Replacement, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eThe Motorcraft DY861 Glow Plug Switch is a factory-grade replacement switch that controls diesel glow plug operation for reliable cold starts and long service life.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned and manufactured to meet original equipment specifications, the Motorcraft DY861 replaces worn or faulty glow plug switches with a component built for abrasion and corrosion resistance. Its robust construction, straightforward installation, and Ford-approved standards make it a practical choice for technicians and DIYers who want dependable glow-plug timing and control without aftermarket guesswork.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this switch improve cold-start control?\u003c\/h3\u003e\n\u003cp\u003eThe DY861 ensures consistent electrical timing to glow plugs so they heat correctly during engine start cycles. By restoring proper switching function, it reduces variability in glow-plug activation and helps the engine reach optimal combustion conditions faster.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecise switching action tailored to original electrical specifications\u003c\/li\u003e\n  \u003cli\u003eStable contact performance reduces intermittent starts\u003c\/li\u003e\n  \u003cli\u003eResists corrosion to maintain conductivity over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation straightforward for technicians and DIYers?\u003c\/h3\u003e\n\u003cp\u003eMotorcraft engineered the DY861 for plug-and-play compatibility with the corresponding vehicle harness and mounting points. The part’s form factor and connector orientation minimize trimming or rewiring, so installation is typically quick and requires common hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design aligns with OEM mounting locations\u003c\/li\u003e\n  \u003cli\u003eStandard connector fits factory wiring without modification\u003c\/li\u003e\n  \u003cli\u003eCompact housing simplifies access in tight engine bays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich durability features protect the switch in engine environments?\u003c\/h3\u003e\n\u003cp\u003eThe DY861 uses materials and finishes that resist abrasion and environmental corrosion, helping preserve electrical integrity under vibration and temperature cycles common to diesel engines. That durability supports dependable performance across many start cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant terminals for long-term conductivity\u003c\/li\u003e\n  \u003cli\u003eRobust housing to resist wear from engine vibration\u003c\/li\u003e\n  \u003cli\u003eManufactured to stringent quality standards for consistent reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know this is the right part for my vehicle?\u003c\/h3\u003e\n\u003cp\u003eConfirm the DY861 by matching your vehicle’s OEM part number, connector style, and mounting points. Motorcraft parts are intended to meet Ford specifications, so cross-referencing your vehicle’s service manual or parts catalog helps ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare physical connector shape and pin count\u003c\/li\u003e\n  \u003cli\u003eVerify mounting hole spacing against the old switch\u003c\/li\u003e\n  \u003cli\u003eCheck compatibility in manufacturer parts listings or VIN-based lookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Motorcraft DY861 Glow Plug Switch is ideal for professional mechanics, fleet maintenance teams, and experienced DIYers working on compatible Ford diesel models who need a direct-fit, resilient replacement. If you require a replacement that aligns with original specifications, resists corrosion and abrasion, and installs without complex wiring changes, the DY861 is a practical choice to restore reliable glow plug control.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFeatures: Resists abrasion and corrosion; Made of high quality; Highly durable and reliable; Easy installation; Manufactured under stringent standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the DY861 a direct replacement for my Ford glow plug switch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your OEM part number or connector matches DY861 specifications, it is a direct-fit replacement. Verify with VIN or parts catalog.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the Motorcraft DY861?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are typically required—common hand tools suffice for removal and mounting in most engine bays.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Motorcraft","offers":[{"title":"Default Title","offer_id":67586526380217,"sku":"B000C5DJDI","price":147.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/motorcraft-dy861-front-view.jpg?v=1790485789"},{"product_id":"a-premium-accelerator-pedal-position-sensor-assembly-for-gm-trucks-suvs-direct-fit-replacement-with-oe-style-connector","title":"A-Premium Accelerator Pedal Position Sensor Assembly for GM Trucks\/SUVs — Direct-Fit Replacement with OE-Style Connector","description":"\u003cp\u003e\u003cstrong\u003eThe A-Premium Accelerator Pedal with Position Sensor Assembly is a direct-fit replacement pedal module that restores throttle responsiveness and communicates accurate pedal position to your vehicle's engine control system.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement assembly is engineered for a wide range of GM trucks and SUVs from the early 2000s, offering OE-style fitment and electrical compatibility for models that use a pedal position sensor. It arrives as a complete pedal module including the sensor, connector, and mounting points, so you can swap it in without modifying the vehicle harness. The unit is intended as an aftermarket alternative to worn, unresponsive, or faulty accelerator pedals and is labeled with reference numbers such as APS105 and OEM cross-references for easier identification.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this pedal fit?\u003c\/h3\u003e\n\u003cp\u003eThe A-Premium pedal covers many Chevrolet, GMC, Cadillac and Hummer applications across 2000–2005 model years. Fitment varies by engine and traction-control equipment, and some listings note exclusion if the vehicle has power adjustable pedals. Always cross-check the part reference numbers before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCadillac Escalade: 2002–2003 and Escalade ESV\/EXT early models\u003c\/li\u003e\n  \u003cli\u003eChevrolet Silverado and Suburban\/Tahoe\/Avalanche: selected 2000–2004 models\u003c\/li\u003e\n  \u003cli\u003eGMC Sierra and Yukon\/Yukon XL: multiple 2000–2003 trims (with traction control where specified)\u003c\/li\u003e\n  \u003cli\u003eHummer H2 2003 and other select heavy-duty variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the A-Premium pedal assembly?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for a mechanically inclined person with basic tools: disconnect the battery, unplug the pedal connector, remove the mounting bolts, and install the new module in reverse order. After mechanical installation, verify that connectors are seated and perform a system check per vehicle manufacturer recommendations to ensure correct communication with the ECU.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect battery before beginning to avoid electrical faults\u003c\/li\u003e\n  \u003cli\u003eRemove three-to-four mounting bolts and unplug the factory connector\u003c\/li\u003e\n  \u003cli\u003eInstall new pedal, torque bolts to factory spec, then reconnect electrical plug\u003c\/li\u003e\n  \u003cli\u003eVerify pedal operation at ignition and perform a road test to confirm responsiveness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key features and compatibility references?\u003c\/h3\u003e\n\u003cp\u003eThis assembly integrates the throttle position sensor with the pedal arm for precise position feedback and durable pivot components. It lists several OEM cross-reference numbers and is supplied as a complete replacement to avoid sourcing separate sensor parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes pedal arm, sensor assembly, and factory-style electrical connector\u003c\/li\u003e\n  \u003cli\u003eCross-references: APS105, 5S11464, 15177923, 15767491, 15012606, 19370277\u003c\/li\u003e\n  \u003cli\u003eDesigned for models without power-adjustable pedals where noted\u003c\/li\u003e\n  \u003cli\u003eIntended as a direct replacement—no wiring modification required for matched models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill replacing the pedal affect vehicle safety or performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a degraded or non-functional pedal assembly can restore throttle response and eliminate erratic input signals that affect drivability. Because the accelerator pedal interfaces directly with engine control systems, you should not operate the vehicle until the new assembly is installed and its function verified.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores accurate pedal position signaling to the ECU\u003c\/li\u003e\n  \u003cli\u003eCan resolve hesitation, poor throttle feel, or check-engine alerts tied to pedal sensors\u003c\/li\u003e\n  \u003cli\u003eAlways verify operation and perform a road test after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The A-Premium Accelerator Pedal with Position Sensor Assembly is intended for owners and technicians who need a reliable, OE-style replacement for mid-2000s GM trucks and SUVs. It's a fitment-focused option for those replacing a worn pedal, correcting electronic throttle irregularities, or rebuilding a vehicle to factory-like performance. Confirm vehicle year, engine, and traction-control configuration against the fitment notes and reference numbers before purchasing to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pedal fit vehicles with power-adjustable pedals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Several fitment notes specify it only fits models without power-adjustable pedals. Verify your vehicle's pedal type before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are OEM cross-reference numbers included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The listing includes references like APS105, 5S11464, 15177923, and others for compatibility checks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"A-Premium","offers":[{"title":"Default Title","offer_id":67586544926905,"sku":"B0CLFX6DCH","price":156.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/a-premium-accelerator-pedal-front-view.jpg?v=1790486626"},{"product_id":"dorman-fuel-tank-sending-unit-for-chevrolet-gmc-trucks-1980-1989-direct-fit-corrosion-resistant","title":"Dorman Fuel Tank Sending Unit for Chevrolet \u0026 GMC Trucks 1980–1989 — Direct-Fit, Corrosion-Resistant","description":"\u003cstrong\u003eThe Dorman 692-006 is a direct-fit fuel tank sending unit engineered to restore accurate fuel level readings on compatible Chevrolet and GMC trucks from the 1980s.\u003c\/strong\u003e\n\nThis sending unit replaces worn or failed original equipment sensors and is constructed from materials chosen to provide dependable operation and long service life. It is offered to match the fit and function of the factory unit for specific model years and trims; before ordering, confirm exact vehicle fitment using your vehicle’s make, model and trim in the garage tool.\n\n\u003ch3\u003eWhat vehicles will this sending unit fit?\u003c\/h3\u003e\n\u003cp\u003eThis part covers a defined set of Chevrolet and GMC trucks from the 1980s and late 1980s\/1989 models. Fitment varies by model and year, so be sure to verify your truck’s trim and production year before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet C10\/C20\/C30 and K10\/K20\/K30: 1980–1986\u003c\/li\u003e\n  \u003cli\u003eSelected Chevrolet R- and V-series and R3500\/V3500: 1987–1989\u003c\/li\u003e\n  \u003cli\u003eGMC C1500\/C2500\/C3500 and K1500\/K2500\/K3500: 1980–1986\u003c\/li\u003e\n  \u003cli\u003eSelected GMC R- and V-series: 1987–1989\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this unit restore fuel gauge accuracy?\u003c\/h3\u003e\n\u003cp\u003eThe sending unit measures fuel level inside the tank and sends that signal to your vehicle’s gauge. When the original sender fails, readings become erratic or stop; installing a new Dorman unit replaces the faulty sensor with a component designed to reproduce original signal characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces the internal float and resistive sensor assembly\u003c\/li\u003e\n  \u003cli\u003eRestores consistent electrical signal to the fuel gauge\u003c\/li\u003e\n  \u003cli\u003eEngineered to match original mounting and connector locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect for quality and durability?\u003c\/h3\u003e\n\u003cp\u003eDorman builds this replacement with materials intended to withstand normal service conditions, backed by decades of automotive parts manufacturing experience. While environmental exposure and tank conditions affect longevity, the unit is intended to offer a reliable service life comparable to factory parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable materials selected for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eManufactured to meet fit and function expectations\u003c\/li\u003e\n  \u003cli\u003eProduced and supported by experienced product teams in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what else should I check?\u003c\/h3\u003e\n\u003cp\u003eInstallation complexity depends on tank access and vehicle configuration; typical replacement requires draining or lowering the tank or accessing it through a service panel. Basic mechanical skills and common hand tools are usually sufficient, but consult vehicle repair manuals for torque and safety steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify electrical connector type and mounting flange before starting\u003c\/li\u003e\n  \u003cli\u003eInspect tank interior and wiring for corrosion when replacing\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific procedures for fuel handling and safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for: The Dorman 692-006 sending unit is aimed at owners and mechanics working on classic Chevrolet and GMC pickup trucks (primarily 1980–1989 model years) who need a reliable, direct-replacement fuel level sensor. It suits do-it-yourself restorations, routine restorations, and professional repair shops that require an OE-style fit without sourcing original parts. Remember to confirm fitment for your exact make, model and trim using the garage tool before ordering to ensure proper compatibility.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 1985 Chevrolet C10?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the Dorman 692-006 is listed for Chevrolet C10 models from 1980–1986; confirm your trim with the garage tool to be certain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require dropping the fuel tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Access varies by vehicle; some require lowering the tank while others have service access—consult your repair manual before starting.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":67586562293945,"sku":"B000UPBDO2","price":129.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dorman-692-006-front-assembly.jpg?v=1790487129"},{"product_id":"connecticut-electric-pushmatic-p1520-replacement-twin-circuit-breaker-gray-15-20a-per-pole-10kaic-etl","title":"Connecticut Electric Pushmatic P1520 Replacement Twin Circuit Breaker, Gray — 15\/20A per Pole, 10kAIC ETL","description":"\u003cp\u003e\u003cstrong\u003eThe Connecticut Electric UBIP1520 is a newly manufactured Pushmatic P1520 twin circuit breaker providing two 15\/20A circuits in one gray module designed as a direct replacement for Pushmatic load centers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement breaker is made new by Connecticut Electric to fit Pushmatic-style panels that accept Pushmatic circuit breakers. It delivers two separate 120 VAC circuits in the footprint of a single breaker, conserving space while enabling multiple branch circuits. Built to meet ETL\/UL standards and rated 10,000 AIC, the UBIP1520 is intended to restore or expand circuit capacity in older Pushmatic load centers without using used or rebuilt components.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this twin breaker save panel space and add circuits?\u003c\/h3\u003e\n\u003cp\u003eThe UBIP1520 houses two one-pole circuits inside a single module that snaps into one Pushmatic slot. That lets you double the number of branch circuits without enlarging the load center or changing the enclosure. It's a common solution when panel space is limited but extra protected circuits are needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides two independent 120 VAC circuits from one panel slot\u003c\/li\u003e\n  \u003cli\u003eAccepts Pushmatic-style bus connection for direct replacement\u003c\/li\u003e\n  \u003cli\u003eSaves physical space compared with two full-width breakers\u003c\/li\u003e\n  \u003cli\u003eDesigned for typical loads such as lighting and small motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat electrical ratings and safety listings does it have?\u003c\/h3\u003e\n\u003cp\u003eThe breaker is manufactured new to meet Intertek ETL listing and UL Standard 489 for molded case circuit breakers in the US and Canada. It is rated for 15\/20 amps per pole at 120 VAC and has a 10,000 AIC interrupting capacity, appropriate for many residential and light commercial panels. Always confirm the panel labeling and local code requirements before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e15\/20 amp rating for each pole at 120 VAC\u003c\/li\u003e\n  \u003cli\u003e10,000 AIC interrupting rating\u003c\/li\u003e\n  \u003cli\u003eETL listing to UL 489 for US and Canada\u003c\/li\u003e\n  \u003cli\u003eClass CTL design for CTL listed panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich applications are suitable for the UBIP1520 twin breaker?\u003c\/h3\u003e\n\u003cp\u003eThis unit is commonly used for fixed lighting circuits, general-purpose branch circuits, small motors and appliances where individual 15\/20A protection is required. Suggested loads include attic fans, garbage disposals, receptacle circuits and motors up to roughly 1\/4 to 1\/2 horsepower, although local codes and appliance specifications should dictate use. It is not intended as a universal solution—confirm compatibility with your panel and load type first.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFixed lighting and general branch circuits (up to typical residential loads)\u003c\/li\u003e\n  \u003cli\u003eSmall electric motors and fans within suggested horsepower limits\u003c\/li\u003e\n  \u003cli\u003eWall receptacles and dedicated small-appliance circuits\u003c\/li\u003e\n  \u003cli\u003eUseful in renovations where panel space is restricted\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should this replacement be installed and inspected?\u003c\/h3\u003e\n\u003cp\u003eOnly licensed electricians or qualified personnel should install circuit breakers. Replace breakers with new, tested and agency-listed units—never use refurbished or previously used breakers. After installation, verify torque on terminations, correct circuit labeling, and perform required tests per local electrical code.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall only in Pushmatic-compatible load centers\u003c\/li\u003e\n  \u003cli\u003eFollow panel manufacturer's instructions and local codes\u003c\/li\u003e\n  \u003cli\u003eEnsure proper wire sizing, torque, and connections\u003c\/li\u003e\n  \u003cli\u003eHave final work inspected or tested by a qualified professional\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Connecticut Electric UBIP1520 is intended for electricians, remodelers and homeowners maintaining or upgrading older Pushmatic panels who need a new, agency-listed twin breaker to add or restore two 15\/20A circuits in a single slot. It suits projects where panel space is limited and where ETL\/UL-listed new components are required to meet safety and inspection standards.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is UBIP1520 compatible with my Pushmatic panel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your load center accepts Pushmatic-style breakers, the UBIP1520 is designed as a direct replacement. Confirm panel labeling and physical slot compatibility before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this breaker handle motors and disposals?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for many small motors and disposals within suggested limits (roughly 1\/4–1\/2 hp). Verify appliance specifications and local code for exact compliance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Connecticut Electric","offers":[{"title":"Default Title","offer_id":67586562687161,"sku":"B000WURTC0","price":137.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/connecticut-electric-ubip1520-front-view.jpg?v=1790487160"},{"product_id":"kirby-generation-series-sentria-replacement-power-switch-110590-oem-direct-fit-electronic-switch-restores-on-off-control","title":"Kirby Generation Series \u0026 Sentria Replacement Power Switch 110590 — OEM direct-fit electronic switch, restores on\/off control","description":"\u003cp\u003e\u003cstrong\u003eReplacement Kirby Original Generation Switch (110590) restores on\/off control and electrical switching for Generation Series and Sentria vacuum cleaners.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis genuine Kirby switch is designed as a direct-fit electronic replacement for Generation Series and Sentria models. It replaces the worn or failed switch assembly to bring back reliable power control without rewiring or modifications. The part preserves factory compatibility and fits the same mounting points and connectors used in original units.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models does this Kirby switch work with?\u003c\/h3\u003e\n\u003cp\u003eThe 110590 switch is compatible with Kirby Generation Series and Sentria vacuums. It was made to match OEM specifications so it fits existing housings and connector types used on these lines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Kirby Generation Series models\u003c\/li\u003e\n  \u003cli\u003eDesigned for Sentria line vacuum cleaners\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement—no cutting or splicing required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the replacement switch?\u003c\/h3\u003e\n\u003cp\u003eInstallation generally involves removing the vacuum's outer cover, unplugging the old switch, and connecting the new unit to the existing harness. Basic hand tools are usually sufficient, and the switch mounts in the factory location using the same fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect power before starting\u003c\/li\u003e\n  \u003cli\u003eRemove housing screws to access the switch\u003c\/li\u003e\n  \u003cli\u003eUnplug original connector and reattach new switch\u003c\/li\u003e\n  \u003cli\u003eReassemble housing and test operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the main benefits of replacing the switch?\u003c\/h3\u003e\n\u003cp\u003eSwapping in a new 110590 switch restores consistent power control and reduces intermittent cut-outs or failure to start. Replacing the faulty switch is a cost-effective way to extend the service life of an otherwise functional vacuum.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores reliable on\/off operation\u003c\/li\u003e\n  \u003cli\u003eAvoids buying a new vacuum when only the switch is faulty\u003c\/li\u003e\n  \u003cli\u003eMaintains original wiring and mounting setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there specifications or part details I should know?\u003c\/h3\u003e\n\u003cp\u003eThis part is an electronic switch manufactured by Kirby and sold under the KIRBY trademark. It is categorized as an electronic switch component intended for the specified vacuum lines and matches factory dimensions and connector types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufacturer: Kirby (KIRBY trademark)\u003c\/li\u003e\n  \u003cli\u003eItem category: Electronic Switch\u003c\/li\u003e\n  \u003cli\u003eOEM part number: 110590\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a Kirby Generation Series or Sentria vacuum that powers off unexpectedly, won’t turn on, or has a loose or damaged power switch, this OEM 110590 replacement is aimed at DIY repairers and service technicians who want a direct-fit, factory-compatible electronic switch. It’s ideal for anyone looking to restore function quickly without altering original wiring or housings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this switch an original Kirby part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the 110590 is an OEM Kirby electronic switch sold under the KIRBY trademark for Generation and Sentria models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; basic screwdrivers and safe power-disconnection procedures are typically sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Kirby","offers":[{"title":"Default Title","offer_id":67586564227257,"sku":"B0007WRLNU","price":118.26,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kirby-110590-front-switch.jpg?v=1790487210"},{"product_id":"motorcraft-ignition-switch-assembly-sw6958-black-direct-fit-oem-replacement-with-durable-contacts","title":"Motorcraft Ignition Switch Assembly SW6958 Black — Direct-Fit OEM Replacement with Durable Contacts","description":"\u003cp\u003e\u003cstrong\u003eThe Motorcraft SW6958 is a black ignition switch assembly engineered as a direct-fit, OEM-quality replacement for compatible Ford vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen an ignition switch becomes worn or fails, it can cause intermittent starts, accessory power issues, or dashboard electrical anomalies. The Motorcraft Switch Asy - Igniti (P) (SW6958) offers a factory-style solution designed and built by a recognized name in automotive components. This assembly is manufactured to professional standards using up-to-date production technology and is intended to match original equipment specifications so installation and operation are straightforward.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this ignition switch assembly restore reliable starting?\u003c\/h3\u003e\n\u003cp\u003eThe SW6958 replaces the electrical contact points and mechanical switching that control starter engagement and accessory power. Replacing a faulty switch restores consistent signal flow to the starter and accessory circuits, reducing intermittent starting problems and electrical interruptions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for proper alignment and connector compatibility\u003c\/li\u003e\n  \u003cli\u003eDurable contacts to reduce wear and maintain conductivity\u003c\/li\u003e\n  \u003cli\u003eBlack finish matching factory appearance\u003c\/li\u003e\n  \u003cli\u003eManufactured to Motorcraft quality standards for consistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing the Motorcraft SW6958?\u003c\/h3\u003e\n\u003cp\u003eConfirm vehicle compatibility, battery condition, and that symptoms match ignition-switch failure (for example: loss of accessory power, no crank in the key position, or intermittent electrical behavior). Gather basic tools and protective gear; some installations may require removing the steering column cover or disconnecting the battery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify vehicle make, model year, and OEM part cross-reference\u003c\/li\u003e\n  \u003cli\u003eDisconnect the negative battery cable before starting work\u003c\/li\u003e\n  \u003cli\u003eKeep the factory keys or immobilizer procedure handy if applicable\u003c\/li\u003e\n  \u003cli\u003eInspect related wiring and connectors for corrosion or damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will replacement take and what tools are typically needed?\u003c\/h3\u003e\n\u003cp\u003eMost experienced DIYers or professional technicians can complete ignition switch replacement in about 30–90 minutes depending on vehicle complexity. Common tools include screwdrivers, socket set, trim tools, and sometimes torx bits or steering wheel lock release tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools: ratchet, sockets, screwdrivers\u003c\/li\u003e\n  \u003cli\u003eTrim removal tools to protect plastic panels\u003c\/li\u003e\n  \u003cli\u003eTorque wrench if reassembly requires specific torque values\u003c\/li\u003e\n  \u003cli\u003eOptional: service manual or vehicle-specific guide for precise steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this Motorcraft part work with my vehicle's security or accessory systems?\u003c\/h3\u003e\n\u003cp\u003eThe SW6958 is built to match factory specifications and maintain compatibility with the vehicle’s original electrical and starting systems. However, vehicles with advanced immobilizer or keyless-start features may require additional steps, such as key reprogramming or following manufacturer reset procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to integrate with original wiring harness and connectors\u003c\/li\u003e\n  \u003cli\u003eMay require key reprogramming on immobilizer-equipped vehicles\u003c\/li\u003e\n  \u003cli\u003eCheck the vehicle service manual for vehicle-specific instructions\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if the vehicle has security features\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Motorcraft SW6958 is intended for vehicle owners, independent mechanics, and professional repair shops seeking a reliable, factory-compatible ignition switch replacement. It's especially useful for those restoring proper starter and accessory function in compatible Ford vehicles and for anyone who prefers OEM-branded components made with modern manufacturing processes and designed for professional installation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct features at a glance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLeading manufacturer of high-quality automotive replacement parts\u003c\/li\u003e\n  \u003cli\u003eInternationally recognized product range with professional focus\u003c\/li\u003e\n  \u003cli\u003eState-of-the-art manufacturing for consistent fit and function\u003c\/li\u003e\n  \u003cli\u003eDesigned for professional installers and serious DIYers\u003c\/li\u003e\n  \u003cli\u003eContinuously updated designs to meet modern vehicle demands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Motorcraft SW6958 a direct replacement for the factory part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The SW6958 is designed as a direct-fit, OEM-style replacement—verify fit by matching part numbers and vehicle compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to reprogram keys after installing this switch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Sometimes. Vehicles with immobilizers or key programming may require reprogramming; consult the vehicle manual or a dealer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Motorcraft","offers":[{"title":"Default Title","offer_id":67586566160569,"sku":"B009TKSWLQ","price":138.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/motorcraft-sw6958-front-assembly.jpg?v=1790487298"},{"product_id":"generac-oil-pressure-switch-0g68200srv-1-4-nptf-12v-normally-closed-20a-metal-body","title":"Generac oil pressure switch 0G68200SRV 1\/4 NPTF 12V normally closed, 20A metal body","description":"\u003cp\u003e\u003cstrong\u003eThe Generac 0G68200SRV oil pressure switch is a 12-volt, normally closed replacement sensor with a 1\/4 NPTF fitting designed to monitor engine oil pressure and protect compatible Generac equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, metal-bodied switch senses oil pressure and changes contact state when pressure falls or rises, helping the engine control system react appropriately. Built with alloy steel contacts and screw terminals, the unit is made for durability and straightforward installation in generators and other small engine applications. It replaces Generac part numbers 0C30250SRV and 0L2917C and is rated for up to 20 amps, making it suitable for many OEM and service-replacement scenarios.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this switch help protect my generator?\u003c\/h3\u003e\n\u003cp\u003eThe 0G68200SRV monitors oil pressure and interrupts or signals engine systems when pressure drops below a set threshold, reducing the chance of running without adequate lubrication. While it does not actively lubricate, it provides the electrical signal the control system needs to take protective action.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNormally closed contact opens on low or lost pressure to trigger shutdowns or alarms\u003c\/li\u003e\n  \u003cli\u003e12-volt design matches typical generator control circuits\u003c\/li\u003e\n  \u003cli\u003eRated to 20 amps for reliable electrical switching under load\u003c\/li\u003e\n  \u003cli\u003eDurable metal body resists engine-bay conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and compatibility details?\u003c\/h3\u003e\n\u003cp\u003eInstallation uses a 1\/4 NPTF threaded port and screw terminals for the electrical connection; the kit includes two terminals which may require re-terminating your existing wiring. Confirm physical fit and electrical characteristics against your equipment manual or the original switch before replacing it.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4 NPTF fitting for standard oil ports\u003c\/li\u003e\n  \u003cli\u003eScrew terminals—two terminals included for wiring\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for 0C30250SRV and 0L2917C in compatible units\u003c\/li\u003e\n  \u003cli\u003eCheck voltage (12V) and amp rating (up to 20A) before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specifications and build features?\u003c\/h3\u003e\n\u003cp\u003eThis switch combines a metal housing and alloy steel contacts to give dependable electrical performance and mechanical durability in engine environments. It uses a normally closed contact arrangement at 12 volts and is sized to fit common generator oil ports.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 12 VDC\u003c\/li\u003e\n  \u003cli\u003eContact type: Normally closed (N.C.)\u003c\/li\u003e\n  \u003cli\u003eCurrent rating: Up to 20 amps\u003c\/li\u003e\n  \u003cli\u003eBody: Durable metal with alloy steel contacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I need special tools or parts to replace the switch?\u003c\/h3\u003e\n\u003cp\u003eBasic hand tools are typically sufficient: a wrench for the 1\/4 NPTF port and a screwdriver or crimp tool for the screw terminals. If your current wiring uses different terminal types, you may need to re-terminate the leads to match the supplied terminals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWrench sized for 1\/4 NPTF thread\u003c\/li\u003e\n  \u003cli\u003eScrewdriver or crimper for terminal connections\u003c\/li\u003e\n  \u003cli\u003eElectrical tape or heat shrink for secure connections\u003c\/li\u003e\n  \u003cli\u003eReplacement terminals if your existing connectors differ\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians and owners of Generac generators or compatible small engines seeking a straightforward, OEM-compatible oil pressure switch for maintenance or repair. If you need a reliable, 12-volt normally closed pressure sensor with a 1\/4 NPTF fitting and up to 20A capacity—especially as a replacement for parts 0C30250SRV or 0L2917C—this Generac 0G68200SRV offers a durable, serviceable option. Always verify model compatibility and wiring before replacing the original component.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this switch a direct replacement for 0C30250SRV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 0G68200SRV is listed as compatible with 0C30250SRV and 0L2917C, but verify fit and electrical specs before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What voltage and thread size does this switch use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It operates at 12 volts and uses a 1\/4 NPTF threaded fitting with screw terminal connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Generac","offers":[{"title":"Default Title","offer_id":67586566750393,"sku":"B008TVU2E6","price":117.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/generac-oil-pressure-switch-front.jpg?v=1790487331"},{"product_id":"aumzong-ignition-switch-lock-cylinder-assembly-for-honda-civic-2006-2011-direct-fit-durable-construction-with-2-remote-keys-46","title":"Aumzong Ignition Switch Lock Cylinder Assembly for Honda Civic 2006–2011 — Direct-Fit, Durable Construction with 2 Remote Keys (46","description":"\u003cp\u003e\u003cstrong\u003eAumzong's 06350-SAA-G30 ignition switch lock cylinder assembly is a direct-fit replacement for Honda Civic (2006–2011) that includes two remote keys with pre-cut electronic chips for proper vehicle starting and remote locking.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Civic’s key cylinder has worn, the tumbler is sticking, or replacement is needed after theft or damage, this complete assembly restores ignition and remote functionality without cutting into wiring. Engineered to match OEM mounting points and electrical contacts, the unit arrives with two remote keys that contain 46 electronic chips; both remotes need to be professionally programmed to the car’s immobilizer before use. The metal construction improves mechanical durability while the remote remotes bring back door lock\/unlock convenience.\u003c\/p\u003e\n\n\u003ch3\u003eWill this ignition cylinder fit my Honda Civic?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the assembly lists part numbers 06350-SAA-G30 and 35100-SDA-A71 and is made specifically to replace the factory ignition lock for Civic model years 2006 through 2011. It is designed to bolt into the same mounting points and mate with the vehicle’s stock harness, so mechanical fitment is straightforward.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Honda Civic 2006, 2007, 2008, 2009, 2010, 2011\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for OEM mounting and electrical contacts\u003c\/li\u003e\n  \u003cli\u003eIncludes two remotes pre-loaded with electronic chips\u003c\/li\u003e\n  \u003cli\u003eConfirm original part numbers 06350-SAA-G30 or 35100-SDA-A71 before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the included remote keys work and what setup is required?\u003c\/h3\u003e\n\n\u003cp\u003eThe two remote keys arrive with 46 electronic chips installed but are not plug-and-play; they must be decoded and programmed to your Civic’s immobilizer system. A locksmith with transponder programming tools or a dealer can pair the remotes to your vehicle so the key turns the ignition and the remote functions operate the door locks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEach remote contains transponder chips for immobilizer compatibility\u003c\/li\u003e\n  \u003cli\u003eProfessional programming and key matching required for operation\u003c\/li\u003e\n  \u003cli\u003eRemote controls restore door lock\/unlock convenience\u003c\/li\u003e\n  \u003cli\u003eProgramming prevents anti-theft issues and ensures starting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and performance features does this replacement offer?\u003c\/h3\u003e\n\n\u003cp\u003eThe Aumzong assembly uses robust metal components in the cylinder and electrical contact areas to resist wear and maintain a solid connection for reliable starts. The build quality aims to reproduce the original feel and durability, while the remote adds modern convenience for daily use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDurable metal construction for long-term mechanical reliability\u003c\/li\u003e\n  \u003cli\u003eStable electrical contacts for consistent ignition performance\u003c\/li\u003e\n  \u003cli\u003eFine internal structure engineered for direct replacement\u003c\/li\u003e\n  \u003cli\u003eRemote keys enhance convenience without modifying factory wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install this myself, or should I seek professional help?\u003c\/h3\u003e\n\n\u003cp\u003eMechanical installation follows the original lock cylinder removal and replacement steps, but because the remotes include immobilizer chips, programming is required to make the keys functional. If you have automotive experience you can swap the cylinder, but plan to use a pro locksmith or dealer for transponder coding to avoid immobilizer lockout.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMechanical swap often doable by experienced DIYers with basic tools\u003c\/li\u003e\n  \u003cli\u003eTransponder programming usually requires specialist equipment\u003c\/li\u003e\n  \u003cli\u003eProfessional installation reduces risk of key\/ignition mismatch\u003c\/li\u003e\n  \u003cli\u003eKeep original parts until programming is confirmed to work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Aumzong ignition switch lock cylinder assembly is aimed at Honda Civic owners (2006–2011) who need a full replacement for a worn or damaged ignition cylinder and want two remote keys included. It suits DIY mechanics comfortable with mechanical replacements, locksmiths and small shops that handle key programming, and drivers seeking an OEM-style fit and improved durability over a worn original part. Note: plan for professional transponder programming to enable starting and remote lock functions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the included keys work right away?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The remote keys contain transponder chips but must be professionally programmed and matched to your vehicle before they will start the engine or operate locks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Honda Civics will this part fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This assembly fits Honda Civic model years 2006 through 2011 and matches part numbers 06350-SAA-G30 and 35100-SDA-A71.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Aumzong","offers":[{"title":"Default Title","offer_id":67586567798969,"sku":"B0D633L6K4","price":167.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/aumzong-ignition-assembly-front-view.jpg?v=1790487377"},{"product_id":"juewucb-fuel-pump-relay-control-module-for-bmw-direct-fit-16147276073-replacement-upgraded-pressure-monitoring","title":"JUEWUCB Fuel Pump Relay Control Module for BMW — Direct-Fit 16147276073 Replacement, Upgraded Pressure Monitoring","description":"\u003cp\u003e\u003cstrong\u003eJUEWUCB's upgraded fuel pump relay control module replaces factory part 16147276073 to restore stable fuel delivery and resolve delivery-related drivability issues on many BMW models.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis direct-fit electronic control module regulates the fuel pump’s behavior and monitors system pressure so your BMW maintains consistent fuel flow under various driving conditions. Built to match OE mounting points and electrical connectors, the unit is engineered to be a plug-and-play replacement for affected BMWs, bringing back predictable starts, steady idling and responsive acceleration when the original module begins to fail.\u003c\/p\u003e\n\n\u003ch3\u003eWhat BMW models does this module support?\u003c\/h3\u003e\n\u003cp\u003eThe module is compatible with a broad range of BMWs produced across the 2009–2019 timeframe, including sedans, coupes, SUVs and sport models. Check the part numbers and the vehicle fit list before purchase to confirm match for your VIN.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits X3 (2011–2017), X4 (2015–2018), X5 (2015–2018), X6 (2013–2019).\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2-, 3-, 4-, 5-, 6- and 7-series models listed in the product features.\u003c\/li\u003e\n  \u003cli\u003eWorks with M2 and Z4 variants on the stated years where the original part number applies.\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers including 16147276073, 16147411596 and related codes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the relay control module improve fuel system performance?\u003c\/h3\u003e\n\u003cp\u003eThis upgraded module actively adjusts pump operation to match driving demands and continuously monitors fuel pressure signals. By doing so it prevents overwork of the pump, reduces pressure fluctuation and helps the engine receive consistent fuel flow during acceleration and idle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdaptive pump modes reduce unnecessary full-power operation.\u003c\/li\u003e\n  \u003cli\u003eReal-time pressure checks help detect and prevent under\/over supply.\u003c\/li\u003e\n  \u003cli\u003eSmoother fuel delivery reduces hesitation and improves throttle response.\u003c\/li\u003e\n  \u003cli\u003eDesigned to safeguard the pump from stress-related failures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich symptoms indicate the module needs replacement?\u003c\/h3\u003e\n\u003cp\u003eFailing control modules often create drivability problems tied to inconsistent fuel delivery rather than mechanical fuel pump failure. If your BMW exhibits trouble starting, stalls at idle, loses power under acceleration or runs irregularly, the control module is a likely culprit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHard or delayed engine starts and repeated cranking.\u003c\/li\u003e\n  \u003cli\u003eIntermittent stalling or rough idle without other obvious causes.\u003c\/li\u003e\n  \u003cli\u003eSudden power loss when accelerating or while under load.\u003c\/li\u003e\n  \u003cli\u003eError codes or fuel system warnings related to pump control\/pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward, and what should I check before fitting?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward for technicians and experienced DIYers because the module follows OE connector and mounting locations. Prior to installation, verify the replacement part number and inspect wiring and connectors for corrosion or damage to ensure a reliable connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm OEM reference numbers match one of the listed replacements.\u003c\/li\u003e\n  \u003cli\u003eInspect harness connectors and clean contact surfaces if necessary.\u003c\/li\u003e\n  \u003cli\u003eTorque mounting hardware to factory specifications and secure seals.\u003c\/li\u003e\n  \u003cli\u003eClear any stored fault codes and run a system test after fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: JUEWUCB’s upgraded fuel pump relay control module is aimed at BMW owners and mechanics who need a dependable, direct-replacement electronic control unit for models affected by aging pump controllers. If your vehicle shows fuel delivery irregularities, or you want to proactively replace a suspect module with an OE-style component that monitors pressure and adapts pump operation, this unit offers a cost-effective repair option to restore stable fuel system performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this module replace part number 16147276073?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it replaces 16147276073 along with related OE numbers listed in the product features.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will installation fix starting and stalling issues?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If those problems are caused by a failing pump control module, replacing it often restores proper starting and stops intermittent stalling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JUEWUCB","offers":[{"title":"Default Title","offer_id":67586568880313,"sku":"B0FQHZ5Y4V","price":108.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/juewucb-front-module.jpg?v=1790487441"},{"product_id":"atracypart-a-c-heater-climate-control-module-for-1996-2002-chevy-gmc-c1500-c3500-manual-a-c-no-rear-defogger-direct-fit-plug-and","title":"ATRACYPART A\/C Heater Climate Control Module for 1996–2002 Chevy GMC C1500–C3500 Manual A\/C No Rear Defogger, Direct-Fit Plug-and-","description":"\u003cp\u003e\u003cstrong\u003eATRACYPART 599-007 is a direct-fit A\/C heater climate control module designed to replace original dashboard climate controls in 1996–2002 Chevy and GMC C1500\/C2500\/C3500 trucks with manual A\/C and no rear defogger.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen the knobs, temperature slider or fan settings on your older Chevy or GMC truck stop responding, a worn or failed climate control module is often the culprit. This replacement unit is engineered to match the electrical and mechanical fit of the original equipment for a straightforward install. It restores user control of fan speed, temperature and mode selections without the cost or delay of dealer-only parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhich models and years does this module fit?\u003c\/h3\u003e\n\u003cp\u003eThis climate control module is built for mid-to-late 1990s through early 2000s Chevy and GMC light-duty and heavy-duty trucks that use manual air conditioning controls and do not have a rear window defogger circuit. Always confirm your dash configuration and connector type before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1996–1999 Chevy \/ GMC C1500 and K1500 (manual A\/C, no rear defogger)\u003c\/li\u003e\n  \u003cli\u003e1996–2000 Chevy \/ GMC C2500 and K2500 (manual A\/C, no rear defogger)\u003c\/li\u003e\n  \u003cli\u003e1996–2002 Chevy \/ GMC C3500 and K3500 (manual A\/C, no rear defogger)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replace the original OE unit?\u003c\/h3\u003e\n\u003cp\u003eThe ATRACYPART 599-007 is manufactured to replace specific OEM part numbers and plug directly into your vehicle’s existing wiring harness. It replicates the control functions of the factory panel so you can use the same knobs and heater\/AC settings as before.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OE numbers: 16231175, 16238895, 16240115, 9378815, 599-007, 15-72548\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play connector compatibility reduces wiring or splicing\u003c\/li\u003e\n  \u003cli\u003eMatches original control layout and mounting points for simple installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and reliability features?\u003c\/h3\u003e\n\u003cp\u003eThis unit is produced with durable materials and built to meet the dimensions and functional requirements of the factory part. ATRACYPART emphasizes longevity and fit, helping avoid frequent failures that can come from cheaper aftermarket replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from premium ABS for impact resistance and climate durability\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet fit and function standards of the original control panel\u003c\/li\u003e\n  \u003cli\u003eOffered with a 12-month warranty covering replacement or refund\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know when the climate control module needs replacing?\u003c\/h3\u003e\n\u003cp\u003eSigns you may need this module include inconsistent temperature response, unresponsive fan or mode switches, or controls that work intermittently. Before replacing, check fuses and connectors; if the electrical supply and actuators are good, the control unit is a likely cause.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSymptoms: no fan speeds, stuck modes, or temperature not changing\u003c\/li\u003e\n  \u003cli\u003ePre-checks: inspect fuses, harness connections and vacuum lines where applicable\u003c\/li\u003e\n  \u003cli\u003eIf symptoms persist, this replacement restores user control functions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: this ATRACYPART 599-007 climate control module is intended for DIY mechanics, professional technicians and owners of 1996–2002 Chevy and GMC trucks who need a reliable, direct-fit replacement for manual A\/C dash controls without a rear window defogger. It’s a practical choice when the original control panel fails, when you prefer a quick plug-and-play swap, or when restoring older trucks to dependable daily use.\u003c\/p\u003e\n\n\u003cp\u003eIncluded features and assurances: compatibility listing for easy verification, direct OE number replacements, high-quality ABS construction for long life, and a 12-month warranty for added confidence after installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this module plug into my existing dash harness?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this unit is designed as a plug-and-play replacement for compatible 1996–2002 Chevy\/GMC trucks with manual A\/C and no rear defogger.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it replace OEM part number 16231175?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, ATRACYPART 599-007 replaces OEM numbers including 16231175, 16238895, 16240115, 9378815, and 15-72548.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":67586610069689,"sku":"B0DR8H92X2","price":117.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/atracypart-599-007-front-panel.jpg?v=1790488278"},{"product_id":"atracypart-climate-control-module-a-c-heater-direct-fit-for-1996-2000-chevy-gmc-trucks-and-suvs-plug-and-play-replacement","title":"ATRACYPART climate control module A\/C heater — Direct-fit for 1996–2000 Chevy \u0026 GMC trucks and SUVs, plug-and-play replacement","description":"\u003cp\u003e\u003cstrong\u003eThe ATRACYPART 599-006 climate control module is a direct-fit replacement A\/C and heater control panel designed to restore temperature and mode control for 1996–2000 Chevrolet, GMC, and select 2000 Cadillac models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement control module addresses failing temperature readouts, unresponsive fan or mode buttons, and erratic climate behavior on compatible GM trucks and SUVs. Built to match original equipment form and function, the unit uses durable ABS housing and standardized connectors for a straightforward plug-and-play swap. Before ordering, confirm your vehicle’s year, model, and engine to ensure compatibility with the listed fitments.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will accept the 599-006 climate control module?\u003c\/h3\u003e\n\u003cp\u003eThe 599-006 fits a range of late-1990s to 2000 GM full-size trucks and SUVs from Chevrolet, GMC, and certain Cadillac Escalade model years. Fitments include C1500\/C2500\/C3500 series trucks, Suburbans, Tahoes, Yukons, and the 2000 Cadillac Escalade where specified. Check the full compatibility list for exact year and model pairings, including V8-specific notes for some 2000 models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet: C1500, C2500, C3500, K-series, Suburban, Tahoe (select years)\u003c\/li\u003e\n  \u003cli\u003eGMC: C1500, C2500, C3500, K1500, Suburban, Yukon (select years)\u003c\/li\u003e\n  \u003cli\u003eCadillac: Escalade 2000 (as listed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the installation and does it replace my OEM part numbers?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward: the module uses factory-style connectors and mounting points so it can be swapped without special wiring or calibration. It replaces several OE references, simplifying parts lookup and ensuring you get the correct component. A basic set of hand tools and about 30–60 minutes are usually all that’s needed for removal and installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connector compatibility with factory wiring harness\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers like 599-006, 16231165, 16240105 and others\u003c\/li\u003e\n  \u003cli\u003eMounts into original dash opening with no custom modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat symptoms indicate I should replace the climate control module?\u003c\/h3\u003e\n\u003cp\u003eIf the climate system no longer responds to temperature adjustments, fan speeds, or mode selections, the control module is a common culprit. Additional signs include blank or flickering displays, inconsistent air distribution, and failure of automatic climate functions. Replacing the module often restores normal operation when other HVAC components are functioning.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUnresponsive or stuck buttons and knobs\u003c\/li\u003e\n  \u003cli\u003eInaccurate or missing temperature display\u003c\/li\u003e\n  \u003cli\u003eErratic A\/C or heater behavior despite good compressor and blower\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality and warranty can I expect from this replacement module?\u003c\/h3\u003e\n\u003cp\u003eThe unit is manufactured with premium ABS and built to match OEM fit and electrical specifications for reliable long-term use. ATRACYPART backs the product with a 12-month warranty that covers defects and offers replacement or refund options if issues arise. Proper installation and vehicle compatibility checks help ensure the product performs as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable ABS housing for long service life\u003c\/li\u003e\n  \u003cli\u003eEngineered to meet electrical and mechanical OEM standards\u003c\/li\u003e\n  \u003cli\u003e12-month warranty with replacement or refund options\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This climate control module is aimed at owners and independent mechanics working on 1996–2000 GM full-size trucks and SUVs who need a reliable, direct-fit replacement for a failing A\/C or heater control panel. It’s suited for vehicles with compatible OEM part numbers and those looking to restore original climate functions without aftermarket rewiring or extensive dashboard modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this module fit my 1998 Chevrolet Tahoe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the 599-006 fits many 1996–1999 Chevrolet Tahoe models—confirm your model year and engine to be certain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is wiring or programming required after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is typically needed; it’s a plug-and-play replacement using factory connectors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":67586610200761,"sku":"B0DCNNY4ZN","price":115.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/atracypart-599-006-front-panel.jpg?v=1790488277"},{"product_id":"dorman-ignition-switch-actuator-pin-924-704-direct-fit-oe-style-replacement-for-chrysler-dodge-jeep","title":"Dorman Ignition Switch Actuator Pin 924-704 — Direct-Fit OE-Style Replacement for Chrysler, Dodge \u0026 Jeep","description":"\u003cp\u003e\u003cstrong\u003eThe Dorman 924-704 Ignition Switch Actuator Pin is a direct-fit replacement pin engineered to match the original actuator's dimensions and durability for specified Chrysler, Dodge, Jeep and Plymouth models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement actuator pin is designed to restore proper engagement between the ignition key cylinder and the vehicle's ignition switch. Manufactured and quality-tested by Dorman, the part aims to provide a reliable, long-lasting alternative to worn or damaged OE pins. Before ordering, verify fitment using your vehicle trim in the garage tool to confirm compatibility with your exact year and model.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this actuator pin resolve common ignition problems?\u003c\/h3\u003e\n\u003cp\u003eA failing actuator pin can cause difficulty turning the key, intermittent starting issues, or a loose-feeling ignition key. Replacing a worn or broken pin restores the mechanical connection that allows the cylinder to actuate the ignition switch reliably. This part replicates the stock geometry so engagement and key travel return to factory-like behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRe-establishes solid mechanical coupling between key cylinder and switch\u003c\/li\u003e\n  \u003cli\u003eEliminates slipping or binding during key rotation\u003c\/li\u003e\n  \u003cli\u003eDesigned to match original pin dimensions for proper engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and years is this Dorman 924-704 compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe 924-704 actuator pin fits a range of late-1990s and early-2000s Chrysler, Dodge, Jeep and Plymouth models. Compatibility varies by trim and production option, so checking the Confirmed Fit information in the garage tool is recommended before purchase. If an “i” icon appears, hover over it to read any specific fitment notes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrysler: Cirrus, Prowler, PT Cruiser, Sebring (select years)\u003c\/li\u003e\n  \u003cli\u003eDodge: Neon, Stratus models across multiple years\u003c\/li\u003e\n  \u003cli\u003eJeep: Cherokee, Grand Cherokee, Liberty, Wrangler (select years)\u003c\/li\u003e\n  \u003cli\u003ePlymouth: Breeze, Neon, Prowler for listed production years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and how difficult is it?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically involves removing the steering column trim and, in some cases, the ignition cylinder to access the actuator pin. For someone with basic mechanical skills and common hand tools it is a straightforward repair; more complex steering lock or airbag-related disassembly may be best handled by a professional. Follow vehicle-specific service instructions and disconnect the battery when working near the airbag system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools usually needed: screwdrivers, socket set, trim tools\u003c\/li\u003e\n  \u003cli\u003eRemove steering column covers to access the actuator pin area\u003c\/li\u003e\n  \u003cli\u003eRefer to factory service manual for steps and torque specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does Dorman ensure quality and fit for replacement parts?\u003c\/h3\u003e\n\u003cp\u003eDorman subjects replacement components to quality control checks and try-on testing to verify fit and function against original parts. The 924-704 pin is built from durable materials intended for long service life and consistent operation. Dorman's experience in aftermarket replacement parts supports ongoing product validation and customer support resources.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTry-on testing to confirm fit on representative vehicles\u003c\/li\u003e\n  \u003cli\u003eDurable material selection for reliable mechanical performance\u003c\/li\u003e\n  \u003cli\u003eDocumentation and fitment guidance via the garage tool and Confirmed Fit bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Dorman 924-704 Ignition Switch Actuator Pin is intended for do-it-yourselfers, independent mechanics, and fleet maintenance teams working on compatible Chrysler, Dodge, Jeep and Plymouth vehicles that exhibit ignition key play, difficulty starting, or a failing actuator pin. If you need a direct-fit replacement that restores proper ignition cylinder engagement, this part offers a practical and tested solution — just confirm your exact trim and year before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal replacement - this ignition switch actuator pin directly replaces the original part on specified vehicle years, makes and models\u003c\/li\u003e\n  \u003cli\u003eDurable construction - this part is made of quality materials for reliable service\u003c\/li\u003e\n  \u003cli\u003eCentury of experience - for over 100 years, Dorman Products has provided quality automotive replacement parts to its customers\u003c\/li\u003e\n  \u003cli\u003eQuality tested - this part has undergone try-on testing to ensure a quality fit\u003c\/li\u003e\n  \u003cli\u003eEnsure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an “i” in a blue circle, additional verification is needed. Please hover over the \"i\" to verify fitment notes match your vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this pin fits my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Enter your specific year, make and trim in the garage tool and check the Confirmed Fit bar; hover over any blue “i” for fitment notes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace the actuator pin myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for most models—basic hand tools and steering column disassembly are needed; follow service manual steps and disconnect the battery near airbags.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":67586641690809,"sku":"B004BYX8W8","price":135.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dorman-ignition-switch-actuator-pin-front.jpg?v=1790489027"},{"product_id":"vnvnmv-auto-start-stop-eliminator-2022-2026-chevy-silverado-gmc-sierra-1500-refreshed-plug-and-play","title":"VNVNMV Auto Start Stop Eliminator — 2022-2026 Chevy Silverado \u0026 GMC Sierra 1500 Refreshed, Plug-and-Play","description":"\u003cp\u003e\u003cstrong\u003eVNVNMV Auto Start Stop Eliminator permanently prevents the factory auto start\/stop system from shutting your engine off at stops in 2022–2026 Chevy Silverado 1500 Refreshed and GMC Sierra 1500 Refreshed models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your truck’s factory start\/stop behavior interrupts idle power, accessories, or driving feel, this plug-and-play module stops that automatic cycling while leaving other vehicle systems intact. The device is tailor-made for the refreshed Silverado and Sierra 1500 lineup (model years 2022–2026) and installs without cutting or splicing factory wiring. A small pry tool and a printed installation guide are included to make fitment straightforward for DIYers or professional installers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this eliminator stop the auto start\/stop feature?\u003c\/h3\u003e\n\u003cp\u003eThe VNVNMV module intercepts the signal used by the vehicle’s control system to trigger automatic engine shutdown. Once connected to the original start\/stop plug, it tells the vehicle to bypass the automatic stop routine so the engine remains running at stops. It is reversible within the same ignition cycle if you want to temporarily restore factory behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlugs directly into factory start\/stop harness — no wire cutting.\u003c\/li\u003e\n  \u003cli\u003eMaintains remote start and other vehicle functions.\u003c\/li\u003e\n  \u003cli\u003eRestore auto start\/stop for the current ignition cycle by pressing the vehicle button once.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installation require vehicle programming or complex wiring?\u003c\/h3\u003e\n\u003cp\u003eNo advanced programming or splicing is required. The kit includes a panel pry tool and a simple printed guide that shows the connector location and steps to connect the unit. Most users can complete installation in minutes with basic hand tools and no diagnostic equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play connector matches factory plug for quick connection.\u003c\/li\u003e\n  \u003cli\u003eNo software updates or ECU reflashes needed.\u003c\/li\u003e\n  \u003cli\u003eInstallation guide and pry tool included to speed the process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes using this device affect warranty, safety systems, or fuel management?\u003c\/h3\u003e\n\u003cp\u003eThe module is designed to be non-intrusive: it only alters the start\/stop command and leaves other engine and safety systems untouched. Because it connects via the original plug without cutting wires, it minimizes permanent changes. Still, confirm vehicle warranty terms and local regulations before modifying factory behavior.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDoes not interfere with remote start functionality.\u003c\/li\u003e\n  \u003cli\u003eDoes not require modification of safety or emissions components.\u003c\/li\u003e\n  \u003cli\u003eReversible within the same ignition cycle for temporary use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is the VNVNMV unit in everyday use?\u003c\/h3\u003e\n\u003cp\u003eThe eliminator is engineered for automotive use and matched to the electrical signals used by the refreshed Silverado\/Sierra platforms. It’s a low-profile, sealed module intended for the cabin harness area, providing consistent performance in daily driving without routine maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact, sealed module sized for under-dash or console installation.\u003c\/li\u003e\n  \u003cli\u003eDesigned for the 2022–2026 refreshed Silverado and Sierra electrical architecture.\u003c\/li\u003e\n  \u003cli\u003eIncludes customer support and an instruction QR code for troubleshooting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Owners of 2022–2026 Chevy Silverado 1500 Refreshed and GMC Sierra 1500 Refreshed trucks who prefer continuous engine idle at stops, want to reduce frequent start\/stop cycling, or need a simple reversible solution without altering factory wiring. It’s a practical choice for DIY installers, fleet managers, and anyone wanting a plug-and-play option to control start\/stop behavior while preserving other vehicle features.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this damage my truck’s battery or electronics?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The module plugs into the existing harness without cutting wires and is designed to leave other electronics and remote start unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I undo the change if I want auto start\/stop back temporarily?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Pressing the factory start\/stop button restores auto stop within the same ignition cycle; reconnecting factory behavior is simple.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VNVNMV","offers":[{"title":"Default Title","offer_id":67586692481209,"sku":"B0H2D6LSD4","price":146.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vnvnmv-front-module-and-packaging.jpg?v=1790490224"},{"product_id":"trq-ignition-starter-switch-direct-fit-2000-2002-chevy-gmc-trucks-pre-assembled-10-pin","title":"TRQ Ignition Starter Switch — Direct-Fit 2000–2002 Chevy \u0026 GMC Trucks, Pre-Assembled 10‑Pin","description":"\u003cp\u003e\u003cstrong\u003eThe TRQ Ignition Starter Switch is a direct-fit replacement switch engineered to restore reliable starting, ignition power, and accessory function on compatible 2000–2002 Chevrolet and GMC full-size trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ignition starter switch from TRQ is built as a pre-assembled, OEM-style replacement designed for straightforward swap-in installation on a range of Chevrolet Silverado, Tahoe, Suburban and GMC Sierra and Yukon models from 2000–2002. It carries multiple OEM reference numbers for cross-compatibility and arrives ready to install with the correct 10-pin connector where required. TRQ supports buyers with fitment info and extensive how-to videos to help you complete the repair with confidence.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this ignition starter switch fit?\u003c\/h3\u003e\n\u003cp\u003eThe TRQ Ignition Starter Switch fits many Chevrolet and GMC full-size trucks and SUVs produced around 2000–2002. Fitment varies by model year and whether the vehicle has four-wheel steering; several applications require the 10-pin connector configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet models: Silverado 1500\/2500\/2500HD\/3500 (2000–2002, check 10-pin and 4WS notes), Suburban 1500\/2500 (2000–2002), Tahoe (2000–2002).\u003c\/li\u003e\n  \u003cli\u003eGMC models: Sierra 1500\/1500HD\/2500\/2500HD\/3500, Yukon (2000–2002) and C3500HD (2002), with connector-specific fitment.\u003c\/li\u003e\n  \u003cli\u003eConfirm exact compatibility using the included reference numbers and your vehicle’s wiring arrangement before purchasing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation work and what tools are typically required?\u003c\/h3\u003e\n\u003cp\u003eThe unit ships pre-assembled to mirror the original equipment layout, minimizing disassembly and wiring changes. Installation usually requires basic hand tools and a moderate level of mechanical skill; TRQ’s DIY videos walk through common removal and replacement steps for these model years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon tools: ratchet and sockets, screwdrivers, trim tools to remove dash panels, electrical cleaner if needed.\u003c\/li\u003e\n  \u003cli\u003ePre-assembled design reduces wiring modifications or soldering; simply unplug the old switch and plug in the replacement where compatible.\u003c\/li\u003e\n  \u003cli\u003eFollow TRQ’s step-by-step video for your specific truck model to avoid interior trim damage and ensure correct torque on fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality assurances and reference numbers should I check?\u003c\/h3\u003e\n\u003cp\u003eTRQ backs this ignition starter switch with a limited lifetime warranty against defects when used as intended. The product lists numerous cross-reference numbers so you can match the part to the original equipment number before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReference numbers include: US-346, 26070110, 26098763, 1S5974, 53-27366 and others for cross-checking.\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty covers manufacturing defects; excludes normal wear, misuse, or modification.\u003c\/li\u003e\n  \u003cli\u003eTRQ provides a large library of installation videos to help verify fit and installation procedures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this replacement restore all ignition functions and is it plug-and-play?\u003c\/h3\u003e\n\u003cp\u003eWhen matched to the correct year, model and connector type, the TRQ Ignition Starter Switch is intended to restore ignition, starter engagement and accessory circuits without additional wiring. It’s built as a direct replacement to reduce installation time, but confirm connector type (10-pin where specified) and four-wheel steering exceptions before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to replace the factory switch with minimal modifications when fit is confirmed.\u003c\/li\u003e\n  \u003cli\u003ePre-assembled harness\/connector configurations match original equipment in supported applications.\u003c\/li\u003e\n  \u003cli\u003eUse TRQ fitment charts and vehicle guides to verify plug compatibility and avoid returns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This TRQ Ignition Starter Switch is intended for DIY mechanics and professional technicians restoring starting and ignition function on 2000–2002 Chevrolet and GMC trucks and SUVs. It’s a practical choice if you need a direct-fit replacement backed by cross-reference numbers, manufacturer support videos, and a limited lifetime warranty. Always confirm fitment for your exact model year, connector type, and four-wheel steering configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReference Numbers: US-346; 26070110; 26098763; 1S5974; 53-27366; CS659; D1422D; KS6256; LS1077; SM322; UL14-67; US346\u003c\/li\u003e\n  \u003cli\u003eYOUR TRUSTED DIY VIDEO SOURCE: TRQ offers the largest catalog of DIY videos for replacement parts, making installation easier and repairs more accessible. Our mission is to help you \"View Before You Do,\" with hundreds of new videos added weekly.\u003c\/li\u003e\n  \u003cli\u003eTRUST \u0026amp; COMPATIBILITY: For over 25 years, TRQ has been the premium choice for direct-fit replacement parts. Confirm fitment with the Amazon Garage \"confirmed fit\" feature and review our full compatibility chart below before purchase.\u003c\/li\u003e\n  \u003cli\u003eEASE OF INSTALLATION: Save time and effort with pre-assembled components designed as direct replacements for the original equipment, ensuring precise fit and eliminating the need for modifications.\u003c\/li\u003e\n  \u003cli\u003eLimited Lifetime Warranty: This product is warranted against defects in materials and workmanship for its lifetime, when used as intended. Excludes normal wear and tear, misuse, abuse, or unauthorized modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm this switch fits my truck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Match your vehicle year\/model and connector type (10-pin where specified) against the fitment list and reference numbers before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does TRQ offer installation help?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—TRQ provides extensive DIY videos and guidance to walk you through removal and replacement steps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TRQ","offers":[{"title":"Default Title","offer_id":67586710569145,"sku":"B0CF8KR252","price":135.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/trq-ignition-switch-front-view.jpg?v=1790490974"},{"product_id":"vintage-air-trinary-pressure-switch-11086-vus-3-8-24-thread-with-o-ring-high-low-a-c-protection","title":"Vintage Air Trinary Pressure Switch 11086-VUS 3\/8\"-24 Thread with O-Ring — High\/Low A\/C Protection","description":"\u003cstrong\u003eVintage Air 11086-VUS is a trinary pressure switch with O-ring designed to replace standard drier-mounted switches and protect your A\/C system by monitoring high and low refrigerant pressures.\u003c\/strong\u003e\n\nThis replacement trinary switch fits common drier ports and uses a 3\/8\"-24 male thread for a straightforward install. Supplied with a sealing O-ring, the 11086-VUS accepts universal fit applications and is intended to work with aftermarket and OEM receivers\/driers (drier unit not included). The switch provides electrical control for compressor cycling and safety cutouts when pressure thresholds are reached.\n\n\u003ch3\u003eHow does this trinary switch integrate with my A\/C drier?\u003c\/h3\u003e\n\u003cp\u003eThe 11086-VUS mounts directly into the receiver\/drier using a standard 3\/8\"-24 male thread, replacing the existing pressure sensor. Installation requires proper sealing with the supplied O-ring and matching port size. Electrical connectors attach to the vehicle harness to restore pressure-based control functions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: 3\/8\"-24 male for common drier ports\u003c\/li\u003e\n  \u003cli\u003eIncludes O-ring for a leak-resistant seal\u003c\/li\u003e\n  \u003cli\u003eReplaces drier-mounted trinary switches in universal-fit setups\u003c\/li\u003e\n  \u003cli\u003eDrier unit must be present but is not included with the switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the trinary switch actually do for performance and safety?\u003c\/h3\u003e\n\u003cp\u003eThe trinary switch senses both high and low refrigerant pressures and controls the A\/C compressor accordingly. By opening or closing circuits at preset pressure points, it prevents compressor damage from excessively low charge or dangerously high pressure. This component helps maintain system reliability and reduces the chance of costly compressor failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonitors high- and low-pressure conditions\u003c\/li\u003e\n  \u003cli\u003eCuts compressor engagement to prevent damage\u003c\/li\u003e\n  \u003cli\u003eSupports vehicle A\/C safety and longevity\u003c\/li\u003e\n  \u003cli\u003eActs as a replacement for factory trinary devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I need to know before buying and installing the 11086-VUS?\u003c\/h3\u003e\n\u003cp\u003eConfirm your receiver\/drier port is compatible with a 3\/8\"-24 male threaded switch and that your vehicle’s electrical connectors match the switch terminals. The product ships with an O-ring but not the drier, so plan to install it into an existing or new receiver\/drier. Basic tools and an understanding of A\/C system evacuation and recharge procedures are required for a correct, leak-free installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify drier port thread and electrical connector compatibility\u003c\/li\u003e\n  \u003cli\u003eO-ring included; drier not supplied\u003c\/li\u003e\n  \u003cli\u003eRecommended: professional A\/C service for evacuate\/recharge\u003c\/li\u003e\n  \u003cli\u003ePackage dimensions: 6.75 x 11.72 x 8.44 inches; weight 3.19 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is this Vintage Air switch?\u003c\/h3\u003e\n\u003cp\u003eThe 11086-VUS is produced for universal aftermarket applications and built to meet the practical demands of vehicle A\/C systems. While components originate from China, Vintage Air parts are packaged and specified for dependable replacement use. Proper installation and correct system service practices are key to long-term performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured for universal aftermarket fitment\u003c\/li\u003e\n  \u003cli\u003ePackaging suitable for single-part shipping and storage\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand typical automotive A\/C operating conditions\u003c\/li\u003e\n  \u003cli\u003eWorks as a direct drier-mounted replacement switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThis trinary switch is aimed at automotive technicians, restoration builders, and DIY mechanics who need a direct replacement for a drier-mounted pressure switch. If you’re installing or servicing an A\/C receiver\/drier and require a 3\/8\"-24 threaded trinary switch with a sealing O-ring, the Vintage Air 11086-VUS is a practical, universal-fit option. For safety and warranty reasons, have a qualified technician handle refrigerant evacuation and recharge when replacing pressure-sensing components.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 11086-VUS include the receiver\/drier?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the 11086-VUS includes the trinary switch and O-ring only; the receiver\/drier is not supplied.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What thread size does this switch use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The switch uses a 3\/8\"-24 male thread compatible with many receiver\/drier ports.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Vintage Air","offers":[{"title":"Default Title","offer_id":67586738094265,"sku":"B005JVOBFK","price":126.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vintage-air-trinary-switch-front-view.jpg?v=1790491914"},{"product_id":"otc-remote-starter-switch-3650-heavy-duty-5-ft-12-gauge-leads-hot-circuit-indicator","title":"OTC Remote Starter Switch 3650 Heavy-Duty — 5 ft 12‑Gauge Leads \u0026 Hot‑Circuit Indicator","description":"\u003cstrong\u003eThe OTC 3650 Heavy-Duty Remote Starter Switch is a single-operator tool that lets you safely crank or start an engine from under the hood or from either side of the vehicle.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned for technicians and DIY mechanics, this compact remote starter switch delivers high-current performance in a rugged, easy-to-handle package. Its non-slip rubber grip, heavy-duty push button, and visible hot-circuit indicator reduce fumbling and increase safety during engine starting procedures. With five feet of thick, oil- and grease-resistant 12-gauge leads and wide-opening clips protected by boots, the OTC 3650 gives you the reach and secure connections needed for most repair benches and roadside jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the OTC 3650 make one-person engine starting easier?\u003c\/h3\u003e\n\u003cp\u003eThe OTC 3650 allows a single technician to energize the starter while positioned under the hood or beside the vehicle, removing the need for a second person. Its ergonomically contoured rubber grip and responsive push button deliver controlled operation, even with oily hands or gloves on.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-operator control for safe, hands-on starting\u003c\/li\u003e\n  \u003cli\u003eNon-slip rubber handle improves grip during use\u003c\/li\u003e\n  \u003cli\u003eHigh-current push button designed for repeated cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and diagnostic cues does the starter switch provide?\u003c\/h3\u003e\n\u003cp\u003eThis starter switch includes a visible ready light that glows red when connected to a hot circuit, so you can confirm power before pressing the button. The indicator turns off while the switch is depressed, giving an immediate visual cue that current is flowing through the starter circuit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReady light signals presence of battery\/starter circuit voltage\u003c\/li\u003e\n  \u003cli\u003eIndicator extinguishes during cranking to show active current flow\u003c\/li\u003e\n  \u003cli\u003eProtective clip boots reduce accidental shorts during hookup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the leads and clips durable enough for professional shop use?\u003c\/h3\u003e\n\u003cp\u003eThe OTC 3650 is built with five-foot, 12-gauge leads rated to withstand oil, grease, and the rough conditions of automotive work. The heavy-duty, high-current clips open wide to 5\/8 inch, making attachment to battery posts, starter solenoids, and other terminals straightforward and secure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5 ft long 12-gauge leads resist oil and grease exposure\u003c\/li\u003e\n  \u003cli\u003eClips open to an extra-wide 5\/8 inch for easier connection\u003c\/li\u003e\n  \u003cli\u003eClip boots protect against accidental contact and shorting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this tool fit into my workflow?\u003c\/h3\u003e\n\u003cp\u003eThe OTC 3650 is compact enough to keep in a toolbox or on a service cart, ready for jump-starts, troubleshooting starter circuits, or cranking engines during maintenance. Its straightforward design minimizes setup time—clip to the hot circuit, verify the ready light, then press the button to crank.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePortable form factor fits toolboxes and service carts\u003c\/li\u003e\n  \u003cli\u003eFast setup for diagnostic and maintenance tasks\u003c\/li\u003e\n  \u003cli\u003eDurable build for repeated shop or roadside use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The OTC 3650 Heavy-Duty Remote Starter Switch is aimed at automotive technicians, mobile mechanics, and experienced DIYers who need a reliable, single-operator method to crank engines or test starter circuits. If you perform engine repairs, starter\/solenoid diagnostics, or frequently work alone, this tool streamlines the process while offering durable leads, clear electrical indication, and secure clip connections.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one person safely start an engine with this switch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The OTC 3650 is designed for single-person use with a non-slip grip and visual ready light to confirm a hot circuit before cranking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What length and gauge are the leads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The unit has five-foot, 12-gauge oil- and grease-resistant leads for durable, high-current connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OTC","offers":[{"title":"Default Title","offer_id":67586747531449,"sku":"B002YKFA3G","price":137.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/otc-3650-front-detail.jpg?v=1790492257"},{"product_id":"atracypart-a-c-climate-control-module-for-chevy-express-gmc-savana-2008-2023-direct-fit-plug-and-play","title":"ATRACYPART A\/C Climate Control Module for Chevy Express \u0026 GMC Savana 2008-2023 — Direct-Fit, Plug-and-Play","description":"\u003cstrong\u003eATRACYPART 599-294 is a direct-fit A\/C climate control module designed to replace faulty HVAC panels in Chevy Express and GMC Savana models from 2008 to 2023.\u003c\/strong\u003e\n\n\u003cp\u003eIf your van’s temperature settings, fan speeds, or mode selection have become erratic, this replacement climate control module restores reliable HVAC operation without the expense of dealer parts. Engineered to match factory specifications, the unit is compatible with a wide range of Chevrolet Express and GMC Savana model years and OE part numbers, offering a straightforward plug-and-play swap for technicians and DIYers alike.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicle models and years will this module fit?\u003c\/h3\u003e\n\u003cp\u003eThis module supports multiple Express and Savana platform variants across several model years. It covers 1500, 2500, 3500, 4500 chassis and passenger or cargo configurations within the listed production ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevrolet Express: 1500 (2008–2014), 2500 \u0026amp; 3500 (2008–2022), 4500 and Cargo\/Passenger (2009–2023).\u003c\/li\u003e\n  \u003cli\u003eGMC Savana: 1500 (2008–2014), 2500 \u0026amp; 3500 (2008–2022), 4500 (2009–2021).\u003c\/li\u003e\n  \u003cli\u003eConfirm fitment by matching your OE number or vehicle year\/trim before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement restore HVAC performance?\u003c\/h3\u003e\n\u003cp\u003eThe module replaces the internal control electronics and buttons that interpret user inputs and communicate with the vehicle’s climate system. Installing the new panel resolves issues such as unresponsive controls, incorrect temperature display, and intermittent fan operation when those symptoms originate in the control unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces worn or faulty control switches and internal circuitry.\u003c\/li\u003e\n  \u003cli\u003eRestores accurate temperature readouts and reliable fan-speed control.\u003c\/li\u003e\n  \u003cli\u003eDesigned to interface with existing vehicle sensors and wiring harnesses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and which OE numbers does it replace?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be plug-and-play for compatible models: remove the dash bezel, unplug the old module, and install the new unit. No special programming is typically required when the correct replacement part is selected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon OE references replaced: 599-294, 15773677, 15773679, 15858577, 15858579, 19417516, and more.\u003c\/li\u003e\n  \u003cli\u003eBasic tools and dash trim removal knowledge usually suffice for installation.\u003c\/li\u003e\n  \u003cli\u003eAlways verify OE number and wiring connector match before fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials, features, and warranty protections are included?\u003c\/h3\u003e\n\u003cp\u003eThe module is manufactured from durable ABS plastic and precision components to meet the demands of vehicle interiors. It includes extra spare buttons and is built for longevity, backed by a one-year warranty to protect against defects and early failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality ABS housing for scratch and wear resistance.\u003c\/li\u003e\n  \u003cli\u003eThree spare buttons included to maintain a fresh, responsive surface.\u003c\/li\u003e\n  \u003cli\u003e12-month ATRACYPART warranty with replacement or refund options.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers, fleet managers, and mechanics who operate or maintain Chevrolet Express and GMC Savana vans that exhibit climate control failures will find this module a cost-effective alternative to dealer parts. It's especially useful for commercial fleets and passenger-transport vehicles needing a reliable, quick HVAC panel replacement that returns consistent temperature control and user interface responsiveness.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this module need programming after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most compatible Chevy Express and GMC Savana models accept this part as plug-and-play with no programming required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers this ATRACYPART climate control module?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The module includes a 12-month warranty with options for replacement or refund if defects occur.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATRACYPART","offers":[{"title":"Default Title","offer_id":67586749759673,"sku":"B0D5YBRNMY","price":125.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/atracypart-front-panel-overview.jpg?v=1790492380"},{"product_id":"ezamintaly-starter-motor-for-john-deere-92h-107h-12v-15-tooth-with-solenoid-relay-ccw","title":"Ezamintaly Starter Motor for John Deere 92H 107H — 12V 15-Tooth with Solenoid Relay (CCW)","description":"\u003cp\u003e\u003cstrong\u003eEzamintaly Starter 15 Teeth \u0026amp; Relay is a 12V PMDD replacement starter assembly designed to fit a long list of John Deere lawn and garden tractors, delivering reliable cranking with a 15-tooth pinion and included solenoid relay.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis starter assembly from Ezamintaly is built with upgraded components intended to meet or exceed OEM performance for older and current John Deere walk-behind and riding mower models. It ships as a complete set — starter motor plus solenoid relay — and is specified for 12-volt systems with counterclockwise (CCW) rotation and a 15-tooth drive. The product lists several OEM reference numbers (592599, MIA13038, SBS0051) and broad model compatibility to help you confirm fitment before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWhich John Deere models will this starter replace?\u003c\/h3\u003e\n\u003cp\u003eThe Ezamintaly starter is compatible with many John Deere models across riding tractors and lawn tractors. Verify your engine’s starter bolt pattern and shaft rotation to ensure a proper swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacements: 92H, 107H\u003c\/li\u003e\n  \u003cli\u003eCommon mower series covered: D125, D130, D140, D155, D160, D170\u003c\/li\u003e\n  \u003cli\u003eAlso fits many E-, S-, X-, Z-, L-series tractors listed in product specs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the electrical and mechanical specifications?\u003c\/h3\u003e\n\u003cp\u003eThis unit is a 12V permanent magnet direct drive (PMDD) starter with CCW rotation and a 15-tooth pinion. It arrives with the solenoid relay required for operation so you won’t need additional parts for a basic replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVoltage: 12V suitable for common small-engine systems\u003c\/li\u003e\n  \u003cli\u003eRotation: CCW (counterclockwise) — confirm with original starter\u003c\/li\u003e\n  \u003cli\u003eTeeth: 15-tooth pinion for matching flywheel ring gears\u003c\/li\u003e\n  \u003cli\u003ePackage: 1 starter motor + 1 solenoid relay included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is the Ezamintaly starter?\u003c\/h3\u003e\n\u003cp\u003eEzamintaly constructs this starter using higher-grade components compared with basic aftermarket options, aiming for improved durability and consistent starts. While longevity depends on installation, wiring, and engine condition, the unit is engineered to meet or exceed OEM standards where specified.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium materials in key wear areas for longer life\u003c\/li\u003e\n  \u003cli\u003eQuality control to ensure consistent electrical connections\u003c\/li\u003e\n  \u003cli\u003eSupplied solenoid relay reduces compatibility issues on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Ezamintaly Starter 15 Teeth \u0026amp; Relay suits do-it-yourselfers, small-farm mechanics, and service shops replacing worn or failed starters on compatible John Deere models. It’s intended for users who need a direct-fit, complete starter assembly (motor plus relay) with clear OEM cross-reference numbers. Before ordering, confirm your model, starter rotation (CCW), and ring gear tooth count to ensure a proper match. If you prefer, reach out with your tractor model and serial number for additional fitment help.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote:\u003c\/em\u003e This description focuses on product specifications and fitment. It does not provide diagnostics for electrical systems or guarantee starter performance on engines with underlying mechanical issues. For best results, inspect battery condition, cable integrity, and flywheel teeth before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter include the solenoid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes one starter motor and one solenoid relay for a complete replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I confirm fitment for my John Deere?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your original starter’s rotation (CCW), 15-tooth pinion, and OEM cross-reference numbers listed in the product details.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Ezamintaly","offers":[{"title":"Default Title","offer_id":67586802581689,"sku":"B0D59VNB1K","price":138.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ezamintaly-starter-front-view_33abf618-5379-4435-9ad6-b03d34ef4a0b.jpg?v=1790493415"},{"product_id":"trq-rear-fuel-tank-sending-unit-for-19-gal-ford-f-series-trucks-direct-fit-pre-assembled-sender","title":"TRQ Rear Fuel Tank Sending Unit for 19-Gal Ford F-Series Trucks — Direct-Fit, Pre-Assembled Sender","description":"\u003cp\u003e\u003cstrong\u003eTRQ's Rear Fuel Tank Sending Unit for 19-gallon tanks is a direct-fit replacement that restores accurate fuel level readings on compatible 1973–1984 Ford F-series trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your classic Ford F100, F150, F250 or F350 with a 19-gallon rear tank shows erratic or stuck fuel gauge readings, this TRQ sending unit replaces the original part with a pre-assembled, vehicle-specific unit built to the OE mounting pattern. It's supplied with the common reference numbers (E0TZ 9275-A, 692-155, PN4075 and others) so you can confirm compatibility before you buy. TRQ emphasizes ease of installation and provides video guidance for DIY replacement, plus a limited lifetime warranty for added confidence.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ford models and years will this sending unit fit?\u003c\/h3\u003e\n\u003cp\u003eThis sending unit is engineered for Ford F-series trucks specified with a 19-gallon rear tank. It covers many model-year and cab combinations across F100, F150, F250 and F350 trucks from the 1970s into the early 1980s. Before installation, verify your exact year, cab type and tank capacity against the detailed fitment list.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Ford F100: 1973–1983 regular cab and 1975–1979 extended cab (19 gal rear).\u003c\/li\u003e\n  \u003cli\u003eFits Ford F150: 1975–1984 regular and extended cab (19 gal rear).\u003c\/li\u003e\n  \u003cli\u003eFits Ford F250 and F350: multiple 1973–1984 regular and extended cab combinations (19 gal rear).\u003c\/li\u003e\n  \u003cli\u003eCross-references include 4017002, 692-155, E0TZ9275A, FG73A, PN4075.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this TRQ sending unit make installation easier?\u003c\/h3\u003e\n\u003cp\u003eTRQ supplies the sending unit pre-assembled to match the original equipment’s mounting and connector layout, which reduces modification and labor time. The company also offers a large library of step-by-step DIY videos so you can watch the procedure before starting the repair.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-assembled components align with factory mounting holes and electrical terminals.\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design minimizes need for brackets, seals or extra wiring.\u003c\/li\u003e\n  \u003cli\u003eAccess to TRQ \"View Before You Do\" installation videos to guide the replacement.\u003c\/li\u003e\n  \u003cli\u003eIncludes common reference numbers for quick part matching.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality and warranty protections come with this part?\u003c\/h3\u003e\n\u003cp\u003eTRQ has produced aftermarket replacement parts for over 25 years and builds this sender to meet fit-and-function expectations. The product includes a limited lifetime warranty against defects in materials and workmanship when used as intended, excluding routine wear, misuse, or unauthorized alterations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured as a direct-replacement aftermarket component for longevity and accurate readings.\u003c\/li\u003e\n  \u003cli\u003eLimited lifetime warranty protects against manufacturing defects.\u003c\/li\u003e\n  \u003cli\u003eCompatibility confirmation tools (e.g., Amazon Garage) recommended prior to purchase.\u003c\/li\u003e\n  \u003cli\u003eReference numbers provided for cross-checking with original parts catalogs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sending unit restore accurate fuel gauge performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or damaged sending unit with a correct-fit TRQ unit resolves common causes of false or intermittent gauge readings. Proper function depends on choosing the exact fit for your tank and ensuring secure electrical and mechanical connections during installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to reestablish reliable fuel-level feedback to the factory gauge.\u003c\/li\u003e\n  \u003cli\u003eWorks best when matched to the specified 19-gallon rear tank configurations.\u003c\/li\u003e\n  \u003cli\u003eInspect wiring, ground connections and the instrument cluster if issues persist after replacement.\u003c\/li\u003e\n  \u003cli\u003eUse TRQ installation videos to confirm correct steps and torque values.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This TRQ Rear Fuel Tank Sending Unit is aimed at owners and restorers of 1973–1984 Ford F100, F150, F250 and F350 trucks with 19-gallon rear tanks who want a straightforward, direct-fit replacement. It's also suited for DIY mechanics and professional technicians seeking a part backed by compatibility references, installation resources, and a limited lifetime warranty.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFeatures: Reference Numbers: 692-155; PN4075; E0TZ 9275-A; E0TZ-9275-A; E0TZ9275A; 4017002; FG73A\u003c\/li\u003e\n  \u003cli\u003eYOUR TRUSTED DIY VIDEO SOURCE: TRQ offers the largest catalog of DIY videos for replacement parts, making installation easier and repairs more accessible. Our mission is to help you \"View Before You Do,\" with hundreds of new videos added weekly.\u003c\/li\u003e\n  \u003cli\u003eTRUST \u0026amp; COMPATIBILITY: For over 25 years, TRQ has been the premium choice for direct-fit replacement parts. Confirm fitment with the Amazon Garage \"confirmed fit\" feature and review our full compatibility chart below before purchase.\u003c\/li\u003e\n  \u003cli\u003eEASE OF INSTALLATION: Save time and effort with pre-assembled components designed as direct replacements for the original equipment, ensuring precise fit and eliminating the need for modifications.\u003c\/li\u003e\n  \u003cli\u003eLimited Lifetime Warranty: This product is warranted against defects in materials and workmanship for its lifetime when used as intended. Excludes normal wear and tear, misuse, abuse, or unauthorized modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this unit fit my 1979 Ford F150 with a 19-gallon rear tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — TRQ lists compatibility with 1975–84 Ford F150 models that have a 19-gallon rear tank; confirm cab type and year before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation difficult for a home mechanic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the part is pre-assembled for direct fit and TRQ offers step-by-step DIY videos to guide typical installations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TRQ","offers":[{"title":"Default Title","offer_id":67586850291897,"sku":"B0B9YPQSHC","price":133.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/trq-sending-unit-front-view.jpg?v=1790494146"},{"product_id":"fexon-a-c-heater-climate-control-module-15221922-direct-fit-abs-switch-panel-for-chevy-gmc","title":"FEXON A\/C Heater Climate Control Module 15221922 - Direct-Fit ABS Switch Panel for Chevy \u0026 GMC","description":"\u003cp\u003e\u003cstrong\u003eFEXON's 15221922 A\/C Heater Climate Control Module Switch Panel is a direct-fit replacement that restores the dash climate controls for compatible Chevy, GMC and Isuzu trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis replacement control module is engineered to match original equipment fit and function so your vehicle's HVAC settings—fan speed, temperature and mode selection—work like they did from the factory. Molded from durable ABS plastic with OE-style styling, the panel is intended for quick swap-in installation and long-term use. Verify your vehicle's part number and model-year compatibility before purchase to ensure proper fitment.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this FEXON switch panel fit?\u003c\/h3\u003e\n\u003cp\u003eThe FEXON unit replaces several factory part numbers and fits specific model years of Chevy, GMC and Isuzu trucks. Confirm the existing part number on your original module or your vehicle's year and model to be certain this unit will install without modification.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces part numbers: 25841356, 25841856, 15221922, 15238515, 1573156, 1573204, 1573869, 15858833, 1573870, SM2106\u003c\/li\u003e\n\u003cli\u003eCompatible with: 2004–2012 Chevy Colorado and GMC Canyon\u003c\/li\u003e\n\u003cli\u003eAlso fits select Isuzu models: 2006 i-280, 2007–2008 i-290, 2006 i-350, 2007–2008 i-370\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward and does not require advanced automotive skills. Most owners can remove the old panel and plug in the replacement using basic hand tools; no programming is typically required when the part number matches.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCommon tools: trim pry, screwdriver, socket set\u003c\/li\u003e\n\u003cli\u003eProcedure: remove trim, unplug factory harness, swap panel, reassemble\u003c\/li\u003e\n\u003cli\u003eTime estimate: typically under one hour for experienced DIYers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and design features of the FEXON module?\u003c\/h3\u003e\n\u003cp\u003eThe housing is injection-molded ABS plastic chosen for durability and resistance to cracking or fading. The layout mirrors the original control panel so it integrates visually with your dash while delivering consistent tactile feedback from buttons and knobs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOE-style appearance for seamless interior match\u003c\/li\u003e\n\u003cli\u003eDurable ABS construction for long service life\u003c\/li\u003e\n\u003cli\u003ePreconfigured connectors for plug-and-play replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and warranty options are available if something goes wrong?\u003c\/h3\u003e\n\u003cp\u003eFEXON offers customer support to help with installation or fitment questions and aims to respond quickly to resolve issues. If you experience an installation or functionality problem, contact the seller support team for troubleshooting and next-step assistance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExpert help available—contact support for guidance\u003c\/li\u003e\n\u003cli\u003eResponsive support within 24 hours for installation issues\u003c\/li\u003e\n\u003cli\u003eSatisfaction-focused returns or exchanges when fitment problems occur\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This replacement climate control switch panel is intended for owners and DIY mechanics restoring HVAC functionality in 2004–2012 Chevy Colorado and GMC Canyon trucks and compatible Isuzu models. It suits buyers who need a budget-friendly, OE-style replacement that installs quickly, matches dash aesthetics, and brings back reliable control over their vehicle's heating and air conditioning systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this panel require programming after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No programming is normally required; it is a direct plug-and-play replacement when part numbers match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How can I confirm this fits my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Check your original module's part number against the listed replacements and confirm vehicle year and model compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FEXON","offers":[{"title":"Default Title","offer_id":67586850586809,"sku":"B0FFB47RQS","price":110.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fexon-front-panel-overview.jpg?v=1790494169"},{"product_id":"buyers-products-company-forward-reverse-relay-module-12v-dc-80a-continuous-heavy-duty-motor-reversing-for-tarp-winch-systems","title":"Buyers Products Company Forward\/Reverse Relay Module 12V DC — 80A Continuous, Heavy-Duty Motor Reversing for Tarp \u0026 Winch Systems","description":"\u003cp\u003e\u003cstrong\u003eThe Buyers Products 5541100 Forward and Reverse Relay Module is a heavy-duty 12V DC switching unit that delivers controlled forward and reverse motor operation for tarps, winches, and boat lifts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, professionally engineered relay module provides robust reversing control for mobile and marine equipment that use 12-volt systems. Built to withstand frequent cycling and heavy loads, the unit balances high-current capability with predictable switching to help reduce wear on motors and mechanical linkages. It’s a practical upgrade for technicians, fleet managers, and DIY fabricators who need dependable directional control without complex wiring or bulky components.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this module control forward and reverse motor directions?\u003c\/h3\u003e\n\u003cp\u003eThe module uses a set of heavy-duty relays configured to route 12V power and ground to the motor in either polarity, producing forward or reverse rotation. Switching is handled internally for clean transitions and repeatable operation, which minimizes voltage spikes and mechanical stress compared with ad-hoc switching arrangements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated relay pair for polarity reversal\u003c\/li\u003e\n  \u003cli\u003e12V DC compatibility for standard vehicle and marine systems\u003c\/li\u003e\n  \u003cli\u003eDesigned to minimize electrical noise and arcing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat current loads can the 5541100 handle safely?\u003c\/h3\u003e\n\u003cp\u003eThis module supports demanding applications with an 80 amp continuous rating and a 100 amp intermittent rating, plus a peak capacity of 150 amps for very short bursts. Those ratings make it suitable for winches, heavy tarp systems, and similar reversing motors that experience high starting currents.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e80A continuous for sustained operation\u003c\/li\u003e\n  \u003cli\u003e100A intermittent for frequent cycling or moderate surges\u003c\/li\u003e\n  \u003cli\u003e150A maximum for brief startup or stall conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it work with my tarp system, winch, or boat lift?\u003c\/h3\u003e\n\u003cp\u003eYes — the relay module was designed with those exact use cases in mind. Its form factor and electrical design integrate easily into truck, trailer, and marine installations that run on 12V systems, allowing retrofits or OEM installations without special controllers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptimized for tarp motors and commercial tarping systems\u003c\/li\u003e\n  \u003cli\u003eCompatible with many truck and trailer winches\u003c\/li\u003e\n  \u003cli\u003eSuitable for marine lifts when mounted in a protected location\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this module help protect motors and wiring?\u003c\/h3\u003e\n\u003cp\u003eBy providing controlled, repeatable reversing and robust contactors, the module reduces mechanical shock and electrical stress on motors and cables. Clean switching reduces arcing and heat buildup at connections, and the high current ratings mean less chance of component overheating under expected loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePredictable switching reduces wear on gearboxes and couplings\u003c\/li\u003e\n  \u003cli\u003eHigh amp ratings lower risk of thermal overload in normal use\u003c\/li\u003e\n  \u003cli\u003eSturdy construction improves long-term reliability in tough environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: technicians, fleet owners, equipment fabricators, and marine professionals who need a compact, high-current reversing relay for 12V motors. If you maintain tarping systems, operate truck winches, or build custom reversing setups and require repeatable, heavy-duty switching without complex electronics, the Buyers Products 5541100 delivers the performance and durability expected in commercial and industrial settings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What voltage does the 5541100 require?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It operates on 12V DC systems commonly found in trucks, trailers, and marine equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the module handle winch startup current?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; rated 80A continuous, 100A intermittent, and up to 150A peak for brief startup surges.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Buyers Products Company","offers":[{"title":"Default Title","offer_id":67586850881721,"sku":"B07F4JLQWN","price":108.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/buyers-5541100-front-panel.jpg?v=1790494189"},{"product_id":"laffoonparts-176408-outboard-kill-switch-replacement-for-johnson-brp-evinrude-keys-elastic-lanyard-direct-fit-abs-pvc","title":"laffoonparts 176408 Outboard Kill Switch Replacement for Johnson\/BRP\/Evinrude — Keys \u0026 Elastic Lanyard, Direct-Fit ABS\/PVC","description":"\u003cp\u003e\u003cstrong\u003elaffoonparts 176408 is a direct-fit outboard ignition kill switch assembly that replaces Johnson\/BRP\/Evinrude part 176408 and includes keys plus an elastic safety lanyard.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a dependable ignition cutoff for a single-engine outboard, this replacement switch delivers a durable, easy-to-install option built from ABS, PVC and metal components. Designed to meet the same mounting and wiring footprint as the factory part, it restores engine stop functionality and adds a flexible, tangle-resistant lanyard so the operator can quickly stop the motor in an emergency.\u003c\/p\u003e\n\n\u003ch3\u003eWill this replace my Johnson\/BRP\/Evinrude 176408 switch?\u003c\/h3\u003e\n\u003cp\u003eYes — the laffoonparts 176408 is manufactured to match the form and function of the original part number for single-engine outboards. The housing, key interface and mounting hole pattern align with common BRP\/Johnson\/Evinrude control boxes to simplify swap-in.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for part number 176408\u003c\/li\u003e\n  \u003cli\u003ePre-drilled mounting holes and included screws\u003c\/li\u003e\n  \u003cli\u003eSame key-operated cut-off function as OEM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow hard is it to install and wire the new kill switch?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for someone comfortable with basic marine wiring: secure the switch to the control box, connect the plug-style wiring harness, and test operation. The switch includes a clasp\/plug connector to reduce wire splicing, but professional installation is recommended if you are unsure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting screws supplied for quick attachment\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play wiring harness with clasp connector\u003c\/li\u003e\n  \u003cli\u003eRecommended: test with ignition off and follow manufacturer wiring diagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and performance characteristics should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe assembly uses ABS and PVC for the housing and a metal cylinder for the keyed mechanism, balancing corrosion resistance and mechanical strength. The switch is built for precision operation and to resist accidental disengagement from vibration while remaining light enough for typical helm locations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable ABS\/PVC housing for marine environments\u003c\/li\u003e\n  \u003cli\u003eMetal key cylinder for reliable actuation\u003c\/li\u003e\n  \u003cli\u003eEngineered to resist vibration-related stoppage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the lanyard add any practical safety or convenience?\u003c\/h3\u003e\n\u003cp\u003eThe included lanyard is elastic with a swivel hook to prevent tangling and to allow comfortable movement while keeping the kill switch connected to the operator. It is expandable so it won’t restrict motion but will pull the key to cut ignition if the operator moves away from the helm unexpectedly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExpandable elastic strap for comfort and reach\u003c\/li\u003e\n  \u003cli\u003eSwivel hook prevents twisting and tangles\u003c\/li\u003e\n  \u003cli\u003eEasy to attach and carry when not in use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: boat owners, repair technicians and marina shops needing a cost-effective, direct-replacement kill switch for single-engine Johnson\/BRP\/Evinrude outboards. If your original 176408 switch is worn, stuck, or missing, the laffoonparts assembly restores ignition cutoff functionality and adds a reliable lanyard for operator safety. Choose this part when you want a straightforward swap with included mounting hardware and plug-style wiring to minimize downtime.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this an exact replacement for Johnson part 176408?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is designed to match the form and function of part 176408 for single-engine Johnson\/BRP\/Evinrude outboards.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are installation screws and wiring connectors included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—mounting screws are provided and the wiring uses a clasp-style plug for easier connection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"laffoonparts","offers":[{"title":"Default Title","offer_id":67586856386745,"sku":"B0CR17MR1G","price":115.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/laffoonparts-front-view-assembly.jpg?v=1790494451"},{"product_id":"dorman-hvac-blower-motor-resistor-kit-973-582-replacement-resistor-harness-pigtail-direct-fit-restore-fan-speeds","title":"Dorman HVAC Blower Motor Resistor Kit 973-582 — Replacement resistor + harness pigtail, direct-fit restore fan speeds","description":"\u003cp\u003e\u003cstrong\u003eThe Dorman 973-582 HVAC Blower Motor Resistor Kit is a factory-fit replacement resistor and harness pigtail designed to restore blower speed control and HVAC function on compatible vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle's fan only works at one speed, won't run, or has intermittent blower operation, a failed blower motor resistor or its corroded connector is often the culprit. The Dorman 973-582 kit supplies a resistive element and the mating harness pigtail to replace overheated or corroded factory components and bring your heating, ventilation, and air conditioning (HVAC) system back to consistent performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit repair a blower that only runs on one speed?\u003c\/h3\u003e\n\u003cp\u003eThe blower motor resistor controls current to the blower motor for different fan speeds. When the resistor or its connector fails, several speed settings can be lost and the blower may default to a single speed or stop altogether. Replacing both the resistor and harness pigtail restores proper electrical pathways and fan-speed regulation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes both resistor and harness pigtail to replace damaged components.\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement design matches original mounting and electrical pin layout.\u003c\/li\u003e\n  \u003cli\u003eRestores multiple fan-speed settings rather than just a single operating speed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and fitment should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eDorman designs this kit for specific years, makes, and models — it’s not a universal part. Fitment varies by vehicle configuration, so confirm compatibility before purchase to ensure the connector type and resistor layout match your car's original equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse your vehicle's make, model, and trim in the fitment tool to confirm compatibility.\u003c\/li\u003e\n  \u003cli\u003eCheck the original resistor shape and connector style against product photos.\u003c\/li\u003e\n  \u003cli\u003eSome vehicles require different resistor assemblies; verify part number cross-references.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and durability features of this Dorman kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is engineered to perform like the original part and simplify repair by providing the harness pigtail commonly damaged by heat or corrosion. Installation is typically straightforward for technicians and experienced DIYers, requiring basic hand tools and access to the blower housing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement form, fit, and function to simplify installation.\u003c\/li\u003e\n  \u003cli\u003eBacked by Dorman engineering and quality specialists in the USA for consistent reliability.\u003c\/li\u003e\n  \u003cli\u003eOften replaces resistors that have failed due to heat, moisture, or connector corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I tell if I need the resistor, the harness, or both?\u003c\/h3\u003e\n\u003cp\u003eVisual inspection and simple testing reveal the most likely failure points: a visibly overheated or corroded connector usually means the harness should be replaced, while a burned or cracked resistor element indicates the resistor needs replacement. The Dorman kit includes both parts to address common combined-failure scenarios.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect for melted plastic, rusted terminals, or discoloration at the connector area.\u003c\/li\u003e\n  \u003cli\u003eTest blower speeds or use a multimeter to check continuity across resistor terminals.\u003c\/li\u003e\n  \u003cli\u003eReplacing both parts prevents repeat failure if corrosion or overheating damaged either component.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Dorman 973-582 HVAC Blower Motor Resistor Kit is intended for vehicle owners, mechanics, and DIYers who need a reliable, direct-replacement resistor and harness pigtail to restore proper HVAC blower operation on compatible vehicles. Choose this kit if your blower shows lost speeds, erratic performance, or if the original connector shows signs of heat or corrosion; verify fitment with your exact make, model, and trim before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fix a blower that only runs on high?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if a failing resistor or corroded connector causes the issue. The kit replaces both parts to restore multiple fan speeds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the Dorman 973-582 kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; basic hand tools and access to the blower housing are typically sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dorman","offers":[{"title":"Default Title","offer_id":67586870870201,"sku":"B01D8VL9UC","price":90.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dorman-blower-resistor-kit-front-view.jpg?v=1790495097"},{"product_id":"zozomotors-dual-electric-fan-relay-kit-40a-185-f-temp-switch-complete-2-fan-wiring-harness","title":"ZOZOMOTORS Dual Electric Fan Relay Kit 40A — 185°F Temp Switch, Complete 2-Fan Wiring Harness","description":"\u003cp\u003e\u003cstrong\u003eZOZOMOTORS Dual Electric Fan Relay Kit is a complete 40 amp wiring harness with an OE-style temperature switch that automatically engages two cooling fans around 185°F and turns them off near 175°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one relay kit supplies the relays, labeled wiring, temperature sensor, hardware and fuse protection needed to add or replace an electric dual-fan setup on cars, trucks, and custom cooling projects. Built to fit medium- and low-profile fans (and adaptable for larger loads with heavier wiring or our heavy-duty kit), the assembly simplifies installation with color-coded leads and a clear wiring diagram. The included temp switch uses a 3\/8\" thread with a 1\/2\" adapter so you can mount it in common water jackets or the cylinder head; it must be grounded through threads to function properly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this relay kit control two cooling fans?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses a 40 amp relay harness paired with a thermostatic switch that closes at approximately 185°F and reopens at about 175°F, powering both fan circuits when coolant temperature rises. The harness routes fused battery power through the relay to the fan positive leads and uses ignition and sensor connections for safe operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e40A relay rated for dual fan operation\u003c\/li\u003e\n\u003cli\u003eColor-coded leads: RED to battery, COFFEE to fan positive, GREY to ignition, BLACK to sending unit\u003c\/li\u003e\n\u003cli\u003eInline waterproof fuse holder with fuses included for battery protection\u003c\/li\u003e\n\u003cli\u003eClear wiring diagram for straightforward connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat mounting and wiring parts are included to finish the job?\u003c\/h3\u003e\n\u003cp\u003eEverything required to wire and mount the system comes in the box: the relay, harness, temperature switch, adapter fittings, fuses, and terminal hardware. Small installation items are supplied so you won’t need extra trips to the store for basic connections.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOE-style temperature switch with 3\/8\" thread and 1\/2\" adapter\u003c\/li\u003e\n\u003cli\u003eSpade terminal for sensor, eight ring terminals, and four wire connectors\u003c\/li\u003e\n\u003cli\u003eInline waterproof fuse holder plus replacement fuses\u003c\/li\u003e\n\u003cli\u003eComprehensive wiring diagram with labeled, color-coded wires\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit work with my fan type and thermostat?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for two medium- or low-profile electric fans as a direct replacement for 10\", 12\", 14\" and 16\" fans. High-profile fans or higher current draws require heavier gauge wiring or our heavy-duty relay kit to safely carry the greater load.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit for common fan sizes up to medium profile\u003c\/li\u003e\n\u003cli\u003eFor high-profile fans, use ZOZOMOTORS heavy duty relay kit P\/N 30247 or upgrade wiring\u003c\/li\u003e\n\u003cli\u003eRequires a thermostat rated 160°F or lower for proper fan cycling with supplied switch\u003c\/li\u003e\n\u003cli\u003eTemperature switch must be grounded through threads to operate correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? ZOZOMOTORS Dual Electric Fan Relay Kit is aimed at DIY mechanics, home garage restorers, performance tuners, and professional installers who need a reliable, plug-and-play solution to manage two electric cooling fans. It’s particularly useful when replacing worn relay assemblies, installing aftermarket fans, or converting a vehicle’s cooling system to electric fans. If you plan to run heavy-draw or high-profile fans, consider upgrading wiring or selecting ZOZOMOTORS’ heavy-duty option to ensure safe, long-term operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperatures do the fans turn on and off?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The included switch actuates fans at about 185°F and deactivates them near 175°F.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this kit run high-profile fans?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s sized for medium\/low-profile fans; use heavier gauge wiring or ZOZOMOTORS P\/N 30247 for high-profile fans.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ZOZOMOTORS","offers":[{"title":"Default Title","offer_id":67586930507961,"sku":"B098X63RRS","price":96.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/zozomotors-front-packaging-relay-harness.jpg?v=1790497171"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/stinger-sgp35-front-view.jpg?v=1794521515","url":"https:\/\/redleafauto.ca\/collections\/switches-relays.oembed?page=2","provider":"Redleaf Auto","version":"1.0","type":"link"}