{"title":"Tesla Accessories","description":"\u003cp\u003eFloor mats, screen protectors, organizers and accessories made for Tesla Model 3, Model Y, Model S and Model X.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"lectron-level-2-tesla-charger-240v-40a-nema-14-50-16-ft-cord-portable-9-6-kw-home-ev-charger","title":"Lectron Level 2 Tesla Charger — 240V 40A NEMA 14-50, 16 ft Cord, Portable 9.6 kW Home EV Charger","description":"\u003cp\u003e\u003cstrong\u003eThe Lectron Level 2 Tesla Charger is a portable 240V, 40 Amp NEMA 14-50 EV charger with a 16 ft cord that delivers faster home and mobile charging for all Tesla models and NACS-equipped vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned to bridge the gap between slow wall outlets and fixed home stations, this compact Lectron charger brings Level 2 charging speeds wherever you can access a NEMA 14-50 outlet. Built with weather-resistant components and safety protections, it supplies up to 9.6 kW of power to replenish range faster than standard 120V plugs. The 16-foot cable and a native Tesla\/NACS connector make it convenient for tight driveways, garage setups, and portable use during trips.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this charger add range to my Tesla?\u003c\/h3\u003e\n\u003cp\u003eThe Lectron Level 2 charger provides up to 36 miles of range per hour depending on vehicle efficiency and on-board charger limits. When connected to a 40 Amp circuit via a NEMA 14-50 outlet, it can deliver as much as 9.6 kW of charging power, shortening overnight or midday charging sessions substantially compared with 120V charging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum output: 9.6 kW \/ 40 Amp on appropriate circuit\u003c\/li\u003e\n  \u003cli\u003eEstimated charging speed: up to ~36 miles of range per hour\u003c\/li\u003e\n  \u003cli\u003eActual results vary by Tesla model, battery state, and climate\u003c\/li\u003e\n  \u003cli\u003e16 ft cord gives flexibility to reach different parking positions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs it safe to use outside and how does it protect my vehicle?\u003c\/h3\u003e\n\u003cp\u003eSafety features are built into both the control box and charging handle to protect against common electrical hazards. The unit includes overvoltage, overcurrent, and short-circuit protections, plus rugged weather ratings that tolerate outdoor conditions for everyday use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eControl box rated IP65 for water-jet and dust resistance\u003c\/li\u003e\n  \u003cli\u003eCharging handle rated IP55 and tested for 10,000+ insertions\u003c\/li\u003e\n  \u003cli\u003eInternal protections for overcurrent, overvoltage, and short circuits\u003c\/li\u003e\n  \u003cli\u003eDurable cable and strain-relief design to reduce wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this charger work with my Tesla and other EVs?\u003c\/h3\u003e\n\u003cp\u003eLectron’s charger features a native Tesla\/NACS connector for plug-and-play compatibility with Model S, 3, X, and Y, and it will also work with other EVs that accept NACS. For non-NACS vehicles, owners can use the appropriate adapter; otherwise, the charger is ready to go with all modern Teslas without additional hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNative NACS connector for direct Tesla compatibility\u003c\/li\u003e\n  \u003cli\u003eUse with any NACS-equipped EV without adapter\u003c\/li\u003e\n  \u003cli\u003eAdapter support available for non-NACS vehicles when needed\u003c\/li\u003e\n  \u003cli\u003eIdeal for home garages, driveways, and locations with NEMA 14-50\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and user-friendly is the Lectron Level 2 charger?\u003c\/h3\u003e\n\u003cp\u003eThis charger is engineered for mobility: its compact control box and 16-foot cord let you move it between locations and park configurations easily. The lightweight design, robust housing, and simple plug-in operation make it suitable for car owners who need faster charging without a permanent hardwired station.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16 ft cable for flexible reach and parking positions\u003c\/li\u003e\n  \u003cli\u003ePortable, plug-and-play NEMA 14-50 connection—no hardwiring required\u003c\/li\u003e\n  \u003cli\u003eRugged construction intended for frequent outdoor use\u003c\/li\u003e\n  \u003cli\u003eSimple setup: plug into a proper outlet and connect to the car\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Lectron Level 2 Tesla Charger is aimed at Tesla owners and drivers of NACS-compatible EVs who want faster charging than a standard household outlet without installing a permanent wall station. It fits people who need a portable solution for home, travel, or second-car use—anyone who values convenience, weather-resilient design, and safe, reliable Level 2 charging on a 240V NEMA 14-50 circuit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this charger with any Tesla?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Lectron charger has a native NACS connector and works directly with Model S, 3, X, and Y.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to hardwire this or just plug it in?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Plug it into a properly installed NEMA 14-50 outlet—no hardwiring required for typical use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lectron","offers":[{"title":"Default Title","offer_id":67584842924217,"sku":"B0CDWC9G6S","price":630.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lectron-front-view-charger_8cb4cdc2-5cc0-46d6-8126-35b9bdb1f188.jpg?v=1790456256"},{"product_id":"lectron-level-1-tesla-charger-wifi-portable-120v-15a-nema-5-15-16-ft-cord-ip65","title":"Lectron Level 1 Tesla Charger WiFi, Portable 120V 15A NEMA 5-15 — 16 ft Cord, IP65","description":"\u003cp\u003e\u003cstrong\u003eThe Lectron Level 1 Tesla Charger (WiFi) is a compact, portable 120V\/15A NEMA 5-15 EV charger that lets Tesla and NACS-equipped vehicles recharge from any standard household outlet while offering app-based monitoring and IP65 durability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for owners who need a simple, dependable charging option without installing dedicated home infrastructure, this Lectron unit provides overnight range gains, remote control through the Lectron app, and weather-resistant performance for travel or daily use. It’s built specifically for Tesla models S\/3\/X\/Y and Cybertruck, and it also works with other EVs using the North American Charging Standard (NACS).\u003c\/p\u003e\n\n\u003ch3\u003eHow much range can I expect overnight with the Lectron Level 1 charger?\u003c\/h3\u003e\n\u003cp\u003eUsing a standard 120V outlet at 15 amps, the Lectron Level 1 charger typically adds roughly 40–50 miles of range over an overnight charging session. Actual gains depend on your vehicle’s efficiency, ambient temperature, and accessory use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated output: 15 amps on a NEMA 5-15 plug\u003c\/li\u003e\n  \u003cli\u003eTypical overnight increase: ~40–50 miles for many Tesla models\u003c\/li\u003e\n  \u003cli\u003eFactors affecting range: driving habits, climate, cabin heating or cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connectivity and control features does the WiFi version offer?\u003c\/h3\u003e\n\u003cp\u003eThe WiFi-enabled Lectron charger pairs with the Lectron mobile app so you can monitor charging status, start or stop charging remotely, and adjust the current within safe limits. Notifications and scheduling help you charge when electricity rates or convenience align with your needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWiFi pairing for remote monitoring via the Lectron app\u003c\/li\u003e\n  \u003cli\u003eAdjustable charging current within charger and outlet limits\u003c\/li\u003e\n  \u003cli\u003ePush alerts for session start, stop, and error conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the charger built for travel and varied weather conditions?\u003c\/h3\u003e\n\u003cp\u003eThe unit carries an IP65 ingress rating, meaning it’s protected from dust and low-pressure water jets—suitable for outdoor use in many conditions. Its portable form, 16-foot cord, and durable housing make it convenient for road trips, parking at remote locations, or charging at friends’ homes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP65-rated housing for dust and light water exposure\u003c\/li\u003e\n  \u003cli\u003e16 ft cord for flexible parking placement\u003c\/li\u003e\n  \u003cli\u003eCompact, lightweight design for carrying and storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and outlets are compatible with this Lectron charger?\u003c\/h3\u003e\n\u003cp\u003eThis is a native Tesla\/NACS-compatible Level 1 charger that plugs into standard household 120V outlets with a NEMA 5-15 plug. It supports all Tesla models including S, 3, X, Y and Cybertruck, and it will charge other EVs that accept the NACS connector.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnector: native Tesla\/NACS for direct compatibility\u003c\/li\u003e\n  \u003cli\u003eOutlet: NEMA 5-15 standard 120V household plug\u003c\/li\u003e\n  \u003cli\u003eWorks with Tesla S\/3\/X\/Y\/Cybertruck and NACS-equipped EVs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you want a no-fuss, affordable way to keep a Tesla or NACS EV topped off from regular household power—without installing a dedicated Level 2 station—this Lectron Level 1 WiFi charger is a strong choice. It suits drivers who value portability for travel, renters or homeowners who prefer not to modify their electrical system, and anyone who wants remote monitoring and simple control through a smartphone app. For faster home charging or higher sustained rates, consider a Level 2 unit; for lightweight, reliable overnight replenishment and on-the-road convenience, the Lectron Level 1 WiFi charger delivers a practical solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the Lectron Level 1 charger be used with any Tesla model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It natively supports Tesla Models S, 3, X, Y and Cybertruck and other EVs using the NACS standard.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a special outlet to use this charger?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It plugs into a standard 120V household outlet with a NEMA 5-15 plug and draws up to 15 amps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lectron","offers":[{"title":"Default Title","offer_id":67584843022521,"sku":"B0G4RN43J6","price":451.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lectron-front-view-charger.jpg?v=1790456256"},{"product_id":"b-qtech-tpms-tire-pressure-sensor-pack-for-tesla-model-3-y-x-s-4-pack-ble-plug-and-play","title":"B-Qtech TPMS Tire Pressure Sensor Pack for Tesla Model 3\/Y\/X\/S — 4-Pack BLE, Plug-and-Play","description":"\u003cstrong\u003eB-Qtech TPMS Sensor pack replaces Tesla’s factory tire pressure sensors with four direct-fit BLE units that require no programming and feed live pressure and temperature data to compatible Model 3, Y, X and S vehicles.\u003c\/strong\u003e\n\n\u003cp\u003eThis four-piece B-Qtech TPMS sensor set is built specifically for Tesla vehicles (Model 3, Model Y, Model X, and Model S for the stated years) and mirrors OEM dimensions and communication behavior so the car recognizes the sensors after mounting. The sensors use Bluetooth Low Energy (BLE) and an Infineon SP490 chip for stable transmission, long battery life and operation across a wide temperature range. Each sensor ships ready to install, minimizing installation time and eliminating manual programming steps.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors install and pair with my Tesla?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: mount each sensor onto the wheel valve stem as you would an OEM unit and torque to spec. Once the wheel is installed and the vehicle is started, the Tesla system recognizes the sensor automatically—no manual coding or TPMS tool is required for compatible model years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement matching OEM part numbers for a plug-and-play fit\u003c\/li\u003e\n  \u003cli\u003eNo external programming tool or dealer visit needed for supported Tesla years\u003c\/li\u003e\n  \u003cli\u003eDesigned to seat and seal like factory sensors for reliable operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accuracy and durability can I expect from B-Qtech TPMS sensors?\u003c\/h3\u003e\n\u003cp\u003eThese sensors use the Infineon SP490 chipset and BLE RF mode to deliver stable, low-latency tire pressure and temperature readings. The design emphasizes long-term endurance with a battery life rated for over eight years under normal use and an operating temperature range that tolerates extreme climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth Low Energy for efficient, consistent data transfer\u003c\/li\u003e\n  \u003cli\u003eBattery life estimated at more than 8 years under typical conditions\u003c\/li\u003e\n  \u003cli\u003eRated operating temperature from -40 °F to 257 °F for all-weather monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these sensors work with my Tesla model and OEM part numbers?\u003c\/h3\u003e\n\u003cp\u003eB-Qtech sensors are manufactured to match Tesla’s proprietary specifications and list compatible part numbers so you can confirm fitment before purchase. They are specifically compatible with Model 3 and Model Y (October 2020–present), Model X (October 2021–present), and Model S (June 2021–present); check your vehicle’s build date to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with part numbers: 1490701-00-B, 1490701-01-B, 1490701-01-C and related OEM codes\u003c\/li\u003e\n  \u003cli\u003eConfirm vehicle model year ranges prior to ordering to guarantee direct compatibility\u003c\/li\u003e\n  \u003cli\u003eOEM-quality dimensions and BLE behavior for reliable system recognition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This B-Qtech four-pack is intended for Tesla owners who need an exact-fit TPMS replacement without dealer programming—drivers who value quick installation, long battery life, and consistent tire data displayed in their vehicle. It suits DIY installers, independent shops, and fleet managers maintaining Model 3, Y, X, or S vehicles within the listed production years. For any issues, B-Qtech offers a one-year warranty and responsive after-sales support to help diagnose faults and arrange replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors need programming after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—these B-Qtech sensors are designed for compatible Tesla years to pair automatically once mounted, so no separate programming is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers the TPMS sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: B-Qtech provides a full 12-month warranty with support responses within 24 hours for sensor issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"B-Qtech","offers":[{"title":"Default Title","offer_id":67584849707193,"sku":"B0D78XHW2Z","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/b-qtech-tpms-front-packaging.jpg?v=1790456366"},{"product_id":"raylix-ccs-to-tesla-adapter-250-kw-400a-dc-fast-charger-with-six-layer-thermal-protection","title":"Raylix CCS to Tesla Adapter — 250 kW (400A) DC Fast Charger with Six‑Layer Thermal Protection","description":"\u003cp\u003e\u003cstrong\u003eThe Raylix Upgraded CCS to Tesla Adapter lets CCS‑enabled Tesla and next‑gen NACS EVs charge at public CCS DC fast chargers up to 250 kW (400 A) safely and reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you own a Tesla or a next‑gen NACS vehicle that supports CCS, this adapter expands your charging options beyond the Tesla Supercharger network so you can use widely available CCS stations like ChargePoint, EVgo and Electrify America. Raylix engineered this adapter after extensive real‑world testing and multiple safety layers to deliver high current capability, robust durability and broad vehicle compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Teslas and NACS vehicles work with this adapter?\u003c\/h3\u003e\n\u003cp\u003eThis adapter is designed for Tesla and NACS cars that have CCS support enabled. It works with Model 3, Model Y, Model S, Model X and Cybertruck models that are CCS‑enabled, plus upcoming NACS EVs noted by manufacturers. Always confirm CCS support in your vehicle settings before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: CCS‑enabled Teslas (2021+ where CCS enabled) and specified NACS EVs\u003c\/li\u003e\n  \u003cli\u003eCheck: Controls \u0026gt; Software \u0026gt; Additional Vehicle Information \u0026gt; CCS Adapter Support\u003c\/li\u003e\n  \u003cli\u003eNot for: non‑CCS Tesla vehicles or cars lacking NACS\/CCS support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast will my Tesla charge with the Raylix adapter?\u003c\/h3\u003e\n\u003cp\u003eRaylix enables DC fast charging up to 250 kW and 400 A depending on the station and your vehicle’s charge acceptance. That means significantly shorter top‑ups at compatible CCS stations compared with many third‑party adapters, though actual speed depends on charger output, battery state and thermal management.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum capability: 250 kW \/ 400 A under ideal conditions\u003c\/li\u003e\n  \u003cli\u003eReal‑world rates vary by charger model and battery state of charge\u003c\/li\u003e\n  \u003cli\u003eThermal monitoring maintains safe operation during high current sessions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety features prevent overheating or damage?\u003c\/h3\u003e\n\u003cp\u003eRaylix uses a six‑layer thermal protection system with active temperature monitoring to reduce overheating risks and protect both the adapter and vehicle inlet. The design also meets high durability tests for mating cycles and load, giving confidence during frequent use at public chargers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix‑layer thermal protection with real‑time temperature sensors\u003c\/li\u003e\n  \u003cli\u003eProven to withstand 30,000+ mating cycles and heavy load pressure\u003c\/li\u003e\n  \u003cli\u003eBuilt to minimize melting, warping or connector failure under stress\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I save money or just gain flexibility?\u003c\/h3\u003e\n\u003cp\u003eBeyond flexibility, charging at non‑Tesla CCS stations can be less expensive than Superchargers in many regions. Raylix opens access to multiple networks, allowing you to compare prices and pick lower‑cost options when available, while still achieving high charge rates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse multiple CCS networks to find lower per‑kWh or per‑minute pricing\u003c\/li\u003e\n  \u003cli\u003eReduce detours by charging at more conveniently located stations\u003c\/li\u003e\n  \u003cli\u003eFast top‑ups lower time costs during trips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Raylix CCS1 to Tesla Adapter is aimed at Tesla owners and NACS EV drivers who already have CCS support enabled and want faster, safer access to public CCS DC fast chargers. It suits drivers who travel long distances, rely on non‑Tesla charging infrastructure, or simply want more charging options and potential cost savings. Ensure your vehicle shows CCS Adapter Support before buying; if you run into issues, Raylix provides professional support and a 365‑day warranty with timely responses.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this adapter work with all Teslas?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only Teslas that have CCS Adapter Support enabled; verify in Controls \u0026gt; Software \u0026gt; Additional Vehicle Information.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reach full 250 kW charging everywhere?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—250 kW is the adapter's capability; actual charging speed depends on the station, battery state, and vehicle limits.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Raylix","offers":[{"title":"Default Title","offer_id":67584850034873,"sku":"B0F9F5T7S4","price":163.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/raylix-adapter-front-view.jpg?v=1790456389"},{"product_id":"ecogenix-ccs-j1772-to-tesla-adapter-fit-for-2021-2026-model-3-y-s-x-2-in-1-up-to-250-kw","title":"Ecogenix CCS \u0026 J1772 to Tesla Adapter — Fit for 2021–2026 Model 3\/Y\/S\/X, 2-in-1 up to 250 kW","description":"\u003cstrong\u003eEcogenix 2-in-1 CCS \u0026amp; J1772 to Tesla Adapter converts public CCS1 and J1772 chargers to work with 2021–2026 Tesla Model 3, Y, S, and X, expanding where and how fast you can charge.\u003c\/strong\u003e\n\n\u003cp\u003eIf you drive a 2021–2026 Tesla (Model 3, Y, S, or X) and want access to the widest range of public chargers, this Ecogenix adapter gives you practical charging flexibility. It supports both CCS1 DC fast charging and J1772 AC stations, so you can plug into ChargePoint, Blink, EVgo, Electrify America, and most J1772 locations without worrying about connector compatibility. The adapter is plug-and-play, built for durability, and packaged to travel easily with your vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use this adapter with my Tesla right away?\u003c\/h3\u003e\n\u003cp\u003eYes, provided your Tesla is a 2021–2026 Model 3, Y, S, or X and the vehicle’s CCS adapter support is enabled in software. The adapter is designed for straightforward operation: connect the station cable to the adapter and plug into your car’s charge port. There’s no extra installation or tools required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible only with 2021–2026 Tesla 3\/Y\/S\/X models\u003c\/li\u003e\n  \u003cli\u003eConfirm “CCS Adapter Support” is set to Enabled in your car settings\u003c\/li\u003e\n  \u003cli\u003eSimple plug-and-play connection at CCS1 and J1772 stations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat charging speeds and station types will this unlock?\u003c\/h3\u003e\n\u003cp\u003eThe Ecogenix adapter enables Level 1 and Level 2 AC charging from J1772 stations and Level 3 DC fast charging from CCS1 stations. Maximum supported rates are up to 250 kW (400 A DC) on CCS and up to 250 V\/80 A AC on J1772, depending on the station and your Tesla’s acceptance limits. This lets you take advantage of many public fast chargers that would otherwise be incompatible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports CCS1 DC fast charging up to 250 kW (400 A DC)\u003c\/li\u003e\n  \u003cli\u003eSupports J1772 AC charging up to 250 V, 80 A\u003c\/li\u003e\n  \u003cli\u003eWorks with major networks like Electrify America, EVgo, ChargePoint, and Blink\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and travel-ready is the adapter?\u003c\/h3\u003e\n\u003cp\u003eBuilt for repeated regular use, the adapter is tested for longevity and rugged conditions. It endures tens of thousands of mating cycles and heavy mechanical strain, and the housing offers waterproofing and high flame-retardant properties. A compact design plus a carrying bag make it easy to store in your trunk or frunk so it’s available when away from home.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOver 20,000 mating tests and 4,700 pounds load-tested\u003c\/li\u003e\n  \u003cli\u003eWaterproof and flame-retardant construction for weather resistance\u003c\/li\u003e\n  \u003cli\u003eLightweight, compact design with included carrying bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any safety or setup steps I should follow?\u003c\/h3\u003e\n\u003cp\u003eFollow basic EV charging safety: inspect connectors before use and avoid charging if visibly damaged. Make sure your car’s CCS adapter support is enabled in settings and only use compatible public chargers rated within the adapter’s limits. Store the adapter dry and avoid placing strain on cables while charging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck vehicle settings for CCS adapter support enabled\u003c\/li\u003e\n  \u003cli\u003eVisually inspect adapter and station connector each use\u003c\/li\u003e\n  \u003cli\u003eUse chargers within the adapter’s rated voltage and current\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Ecogenix 2-in-1 CCS \u0026amp; J1772 to Tesla Adapter is aimed at Tesla owners (2021–2026 Model 3, Y, S, X) who want wider access to public chargers—especially those who travel, rely on third‑party charging networks, or need occasional fast charging outside Tesla Superchargers. It’s ideal for drivers who value a compact, durable, plug-and-play solution to reduce charging downtime and increase route flexibility. Always verify vehicle compatibility before purchase to ensure seamless operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this work with Teslas made before 2021?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This adapter is compatible only with 2021–2026 Tesla Model 3, Y, S, and X models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need any software enabled in the car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Ensure your vehicle’s “CCS Adapter Support” setting is enabled before use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Ecogenix","offers":[{"title":"Default Title","offer_id":67584853573817,"sku":"B0CXDWZ193","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ecogenix-front-view-adapter.jpg?v=1790456497"},{"product_id":"tesfram-tesla-model-3-front-license-plate-bracket-2017-2023-height-adjustable-no-drill-anti-theft-anodized-aluminum","title":"TesFram Tesla Model 3 Front License Plate Bracket (2017–2023) — Height-Adjustable, No-Drill, Anti-Theft Anodized Aluminum","description":"\u003cp\u003e\u003cstrong\u003eA precision-machined, height-adjustable front license plate bracket for Tesla Model 3 (2017–2023) that installs without drilling and includes anti-theft features for a clean, airflow-friendly look.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis TesFram bracket is built specifically for Tesla Model 3 owners who want a low-profile, secure front license plate solution that preserves the car’s aerodynamics and cooling. CNC-machined from aircraft-grade aluminum and finished with an anodized coating, it minimizes grille coverage to help maintain optimal airflow to the battery and motors, while offering simple, reversible installation without altering your vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TesFram mount protect my car’s airflow and performance?\u003c\/h3\u003e\n\u003cp\u003eThe mount’s minimalist footprint was designed to reduce blockage of the Model 3’s lower grille louvers, helping keep cooling pathways clearer than bulkier frames. Less grille coverage can help the cooling system operate more efficiently under normal driving conditions without compromising the car’s factory ventilation design.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMinimalist design reduces louver coverage compared with full-frame mounts\u003c\/li\u003e\n  \u003cli\u003eCNC precision fit aligns with the Model 3 front fascia for minimal protrusion\u003c\/li\u003e\n  \u003cli\u003eAnodized aluminum resists warping so airflow remains consistent over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation truly no-drill and reversible?\u003c\/h3\u003e\n\u003cp\u003eYes — TesFram uses a no-drill installation method that clamps and secures to factory mounting points without cutting into bodywork. A one-key handle lowers the bracket into place and an anti-theft screw secures it; removal returns the front fascia to its original condition with no permanent holes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1-key handle for quick lowering and engagement\u003c\/li\u003e\n  \u003cli\u003eAnti-theft screw locks bracket in place for secure daily use\u003c\/li\u003e\n  \u003cli\u003eNo permanent drilling or modifications to the bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features make this suitable for road use?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is crafted from aircraft-grade aluminum and finished with an anodized surface treatment, offering rust-proof performance and resilience against road salts, rain, and UV exposure. The structural design is engineered to withstand vibration and impacts typical of daily driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% CNC-machined for consistent tolerances and a flush fit\u003c\/li\u003e\n  \u003cli\u003eAnodized coating protects against corrosion and chipping\u003c\/li\u003e\n  \u003cli\u003eEngineered for structural integrity in varied weather conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this interfere with Autopilot sensors or parking assist?\u003c\/h3\u003e\n\u003cp\u003eTesFram’s mounting position and low-profile form were tested to avoid obstruction of forward sensors and cameras used by Autopilot and parking aids. Proper installation places the bracket beneath key sensor zones so driver-assist systems remain operational.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePositioned to minimize obstruction to forward-facing sensors\u003c\/li\u003e\n  \u003cli\u003eDesigned in collaboration with Tesla owners for tested fitment\u003c\/li\u003e\n  \u003cli\u003eIncludes instructions to ensure correct placement relative to sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The TesFram Model 3 front license plate mount is ideal for Tesla Model 3 drivers (2017–2023) who want a tidy, secure license plate installation without modifying the bumper. It’s especially suited to owners who value preserving airflow and cooling, prefer a reversible no-drill solution, and want durable, low-corrosion materials for long-term road use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will installation require drilling my bumper?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. TesFram installs using a no-drill clamp and 1-key handle system that secures to factory points without permanent modification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with all Model 3 years?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This TesFram version fits Tesla Model 3 model years 2017 through 2023 as specified by the manufacturer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TesFram","offers":[{"title":"Default Title","offer_id":67584856359097,"sku":"B0D4QJHS1T","price":177.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tesfram-front-view-installed.jpg?v=1790456591"},{"product_id":"tesfram-tesla-model-x-2022-2024-aluminum-front-license-plate-mount-no-drill-anti-theft-height-adjustable","title":"TesFram Tesla Model X (2022–2024) Aluminum Front License Plate Mount — No-Drill, Anti-Theft, Height-Adjustable","description":"\u003cstrong\u003eAluminum front license plate mount engineered for Tesla Model X (2022–2024) that installs without drilling, resists theft, and lets you set plate height while preserving front airflow.\u003c\/strong\u003e\n\n\u003cp\u003eThis TesFram mounting kit replaces flimsy plastic brackets with a precision-machined aluminum solution built specifically for Tesla Model X vehicles from 2022 through mid-2024. The upgraded design was developed with input from Tesla owners to ensure a flush fit, minimal visual disruption, and reliable corrosion resistance for all-weather use. Installation is tool-light and reversible, making it ideal for owners who want a secure, clean look without modifying the vehicle body.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the mount attach without drilling into my Model X?\u003c\/h3\u003e\n\u003cp\u003eThe bracket uses factory attachment points and a 100% CNC-machined clamp system so you don't need to puncture the bumper. A single-key handle engages the bracket and a tamper-resistant screw locks the plate in place, allowing a firm fit that’s removable if needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses existing mounting locations—no hole cutting or bumper modifications.\u003c\/li\u003e\n  \u003cli\u003eCNC-machined parts ensure consistent alignment and tight tolerances.\u003c\/li\u003e\n  \u003cli\u003eOne-key handle for fast engagement and a tamper-proof screw for security.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this block airflow or change the look of my Tesla’s front end?\u003c\/h3\u003e\n\u003cp\u003eThe TesFram bracket is designed with slim profiles and strategic cutouts so it does not obstruct intake areas or degrade cooling performance. Its minimalist aesthetic integrates with the Model X front fascia, keeping lines clean while holding the plate securely at the chosen height.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlim, low-profile design preserves front-end styling and airflow.\u003c\/li\u003e\n  \u003cli\u003eAnodized finish matches automotive surfaces and resists fading.\u003c\/li\u003e\n  \u003cli\u003eHeight adjustment lets you choose a subtle or more visible plate placement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features make this better than plastic mounts?\u003c\/h3\u003e\n\u003cp\u003eConstructed from aircraft-grade aluminum with an anodized exterior, this bracket resists rust, warping, and UV damage that commonly affect plastic parts. The structural design tolerates road vibration and harsh weather, offering longer life and a consistently tight fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAircraft-grade aluminum body for strength and lighter weight than many steels.\u003c\/li\u003e\n  \u003cli\u003eAnodized coating prevents corrosion and surface wear.\u003c\/li\u003e\n  \u003cli\u003ePrecision CNC machining ensures repeatable fitment and fewer rattles over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow adjustable and theft-resistant is the TesFram kit?\u003c\/h3\u003e\n\u003cp\u003eThe bracket offers multiple vertical positions so you can set how high or low the plate sits relative to the bumper. For security, the kit includes a tamper-proof screw and a quick-action one-key mechanism that discourages casual theft while allowing authorized removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultiple height settings for plate placement flexibility.\u003c\/li\u003e\n  \u003cli\u003eTamper-proof fastener reduces risk of unauthorized removal.\u003c\/li\u003e\n  \u003cli\u003eOne-key handle speeds legitimate installation and detachment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The TesFram Tesla Model X front license plate mount is aimed at Model X owners who want a durable, attractive alternative to plastic brackets and adhesive mounts. It suits drivers who prefer a reversible, non-invasive install, those living in climates that corrode lesser materials, and anyone who values a low-profile, theft-resistant solution that maintains their vehicle’s factory airflow and appearance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will installation void my Tesla warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No drilling or body modification is required; using factory attachment points typically avoids warranty issues, but check Tesla's warranty terms for specifics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with all Model X trims?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—designed for Tesla Model X models from 2022 through June 2024, fitting standard front bumper configurations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TesFram","offers":[{"title":"Default Title","offer_id":67584856326329,"sku":"B0FQ61FT2Y","price":229.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tesfram-front-bracket-full-view.jpg?v=1790456589"},{"product_id":"tesfram-front-license-plate-holder-for-2026-tesla-model-3-no-drill-paint-safe-lockable-with-camera-clear-design","title":"TesFram Front License Plate Holder for 2026 Tesla Model 3 — No-Drill, Paint-Safe \u0026 Lockable with Camera-Clear Design","description":"\u003cstrong\u003eA secure, no-drill front license plate mount engineered for 2026 Tesla Model 3s that preserves bumper paint, keeps the front camera view clear, and locks with a tamper-proof screw.\u003c\/strong\u003e\n\n\u003cp\u003eIf you drive a 2026 Tesla Model 3 (Standard or Premium) and need a front license plate solution that won’t damage the bumper or interfere with Autopilot cameras, this TesFram plate holder was developed specifically for that purpose. It snaps on quickly, uses silicone cushions to avoid paint contact, and features an included anti-theft mechanism so your plate stays put in daily use and harsher weather.\u003c\/p\u003e\n\n\u003ch3\u003eHow simple is installation for busy owners?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be very quick and requires no drilling, glue, or cutting into Tesla’s bumper. Most users can attach and secure the bracket in under five minutes using only the provided parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo-drill snap-on design that fits the Model 3 front grill area\u003c\/li\u003e\n  \u003cli\u003eIncludes an anti-theft screw and the special TesFram removal tool\u003c\/li\u003e\n  \u003cli\u003eInstall completed with a twist of the included screw—no extra hardware needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this holder harm my bumper paint or block airflow?\u003c\/h3\u003e\n\u003cp\u003eTesFram’s mount includes silicone cushions to prevent direct contact with the bumper, minimizing abrasion and scratches while maintaining a clean look. Its open design preserves front intake paths so airflow over cooling components isn’t obstructed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone cushions protect finish and reduce vibration\u003c\/li\u003e\n  \u003cli\u003eLow-profile profile keeps lines clean without covering intake areas\u003c\/li\u003e\n  \u003cli\u003eAnodized aircraft-grade aluminum resists corrosion and road debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes the mount affect front camera or Autopilot performance?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is engineered to sit clear of the front bumper camera on US-produced 2026 Model 3s, preserving the camera’s field of view for driver assistance systems. It’s compatible with FSD versions such as V14+ without introducing visible obstruction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecisely positioned to avoid camera blind spots\u003c\/li\u003e\n  \u003cli\u003eTested with local Tesla EV club input for camera clearance\u003c\/li\u003e\n  \u003cli\u003eWorks with Model 3 Standard \u0026amp; Premium front camera setups (not Performance)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow secure is the plate against theft and the elements?\u003c\/h3\u003e\n\u003cp\u003eSecurity is handled by a tamper-resistant screw that needs the matching TesFram tool to remove, discouraging theft. Material choices and finish provide an outdoor-grade solution built to withstand temperature swings, salt, rain, and snow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti-theft design requires the included proprietary tool to remove\u003c\/li\u003e\n  \u003cli\u003eAircraft-grade aluminum with anodized coating for long-term durability\u003c\/li\u003e\n  \u003cli\u003eEngineered to resist road salt, ice, and UV exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Owners of US-produced 2026 Tesla Model 3 Standard and Premium who want a quick-install, paint-safe front plate solution that keeps the front camera unobstructed and adds theft resistance. Do not use this mount on Model 3 Performance variants; check your vehicle’s camera configuration before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is drilling my bumper required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The TesFram mount snaps on and secures with the supplied anti-theft screw—no drilling or glue needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this block my Model 3's front camera?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It's designed to avoid obstructing the front bumper camera on US 2026 Model 3 Standard and Premium.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TesFram","offers":[{"title":"Default Title","offer_id":67584857342137,"sku":"B0G5N4XSGY","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tesfram-front-view-mounted-on-bumper.jpg?v=1790456618"},{"product_id":"bokman-tesla-ev-charger-level-1-2-32a-20ft-nema-14-50-with-5-15-adapter-nacs-compatible","title":"bokman Tesla EV Charger Level 1 \u0026 2 — 32A 20ft NEMA 14-50 with 5-15 Adapter, NACS-compatible","description":"\u003cp\u003e\u003cstrong\u003ebokman Tesla Charger is a portable NACS-compatible EV charging unit that offers dual-level (Level 2 32A via NEMA 14-50 and Level 1 via included 5-15 adapter) charging with a 20-foot cable, adjustable current settings, a delay timer, and weatherproof safety features.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact charger is designed to give Tesla owners a versatile, no-frills solution for daily charging at home or occasional Level 1 use on the road. It pairs a long 20 ft cable and rugged TPE jacket with a clear LED display and tactile controls so you can set charging speed and delay without relying on an app. ETL safety certification and IP65-rated protection mean it’s built to withstand dust, rain, and broad temperature ranges while protecting against electrical faults.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the bokman charger handle different outlets and charging needs?\u003c\/h3\u003e\n\u003cp\u003eThe unit supports two charging modes: Level 2 through the built-in NEMA 14-50 plug for faster home charging and Level 1 via the included NEMA 5-15 adapter for occasional standard outlet use. Switch modes physically by installing the adapter when needed; the box accepts adjustable current presets so it behaves appropriately for each outlet type.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNEMA 14-50 built-in plug for 32A Level 2 charging\u003c\/li\u003e\n  \u003cli\u003eIncluded NEMA 5-15 adapter for Level 1\/standard outlet charging\u003c\/li\u003e\n  \u003cli\u003eSelectable current steps: 6\/8\/10\/12\/16\/24\/32A\u003c\/li\u003e\n  \u003cli\u003e20-foot cable for flexible parking setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and weather protection features does it provide?\u003c\/h3\u003e\n\u003cp\u003eThe charger is ETL certified to meet U.S. electrical safety standards and includes several built-in protections to minimize electrical risk. Its IP65 enclosure and heavy-duty TPE cable tolerate dust and water spray, while internal safeguards monitor faults and temperature during unattended charging sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eETL certification for electrical safety compliance\u003c\/li\u003e\n  \u003cli\u003eIP65-rated enclosure for dust and water resistance\u003c\/li\u003e\n  \u003cli\u003eMulti-protection system: GFCI, over-voltage, over-current, surge, short-circuit, over-temp\u003c\/li\u003e\n  \u003cli\u003eOperational range roughly -22°F to 130°F for extreme climates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the controls and display make daily charging easier?\u003c\/h3\u003e\n\u003cp\u003eRather than relying on smartphone apps, bokman uses a high-definition LED display and tactile buttons so you can see live voltage and current and make adjustments quickly. The physical buttons offer reliable feedback even when wearing gloves or in wet conditions, and the device remembers your preferred current setting to avoid repeated setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLED screen shows real-time voltage and current readings\u003c\/li\u003e\n  \u003cli\u003eTactile buttons work with gloves and in poor weather\u003c\/li\u003e\n  \u003cli\u003eAuto-lock for stored favorite current setting\u003c\/li\u003e\n  \u003cli\u003eNo Wi‑Fi or app required — straightforward local control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy use the delay timer and adjustable current options?\u003c\/h3\u003e\n\u003cp\u003eThe built-in delay timer lets you start charging 1–12 hours later to take advantage of off-peak electricity rates or schedule charging overnight. Adjustable current lets you match the charger output to your home wiring and desired recharge speed, offering flexibility for energy cost or circuit limitations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelay start from 1 to 12 hours for off-peak charging\u003c\/li\u003e\n  \u003cli\u003eCurrent choices from 6A to 32A to suit circuits and needs\u003c\/li\u003e\n  \u003cli\u003ePreserves battery health by avoiding excessive fast charging when unnecessary\u003c\/li\u003e\n  \u003cli\u003eSimple selection that stays saved between uses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The bokman Tesla Charger is aimed at Tesla owners who want a dependable, portable charging solution that works at home and on the road without app dependence. It's a good fit for drivers who need a long cable, want adjustable charging speeds, and prioritize physical controls and certified safety for unattended overnight charging. Ensure your outlet type—NEMA 14-50 for Level 2 or NEMA 5-15 for Level 1—matches the unit before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this charger compatible with all Tesla models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it uses the NACS connector and works with all Tesla vehicles; verify your outlet (NEMA 14-50 or 5-15) before using.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I set it to start charging later to save on electricity?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the built-in delay timer allows you to schedule charging from 1 to 12 hours after plug-in.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"bokman","offers":[{"title":"Default Title","offer_id":67584861634745,"sku":"B0FL3SQ2TV","price":338.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bokman-front-view-charger_ca45a9d2-7957-4acb-99f5-bda399ec5472.jpg?v=1790456813"},{"product_id":"bokman-tesla-charger-level-1-2-ev-charger-16a-20ft-with-nema-6-20p-5-15-adapter-ip65-etl","title":"bokman Tesla Charger Level 1 \u0026 2 EV Charger — 16A 20ft with NEMA 6-20P\/5-15 Adapter, IP65 \u0026 ETL","description":"\u003cp\u003e\u003cstrong\u003eThis bokman Tesla Charger is a portable dual-level (Level 1 \u0026amp; Level 2) EV charging unit with a 20‑foot cable, NACS connector, and both NEMA 6-20P and NEMA 5-15 adapter for versatile home and travel charging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for Tesla drivers who need a dependable, weatherproof charger without relying on apps or Wi‑Fi, the bokman charger blends a long, rugged cable with tactile controls and an LED readout. It supports adjustable current settings, a programmable delay timer for off‑peak charging, and multi-layer safety protections certified to ETL standards. The compact, IP65‑rated enclosure and included standard outlet adapter make it a flexible option for apartments, road trips, and overnight home charging.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the bokman charger handle different outlets and locations?\u003c\/h3\u003e\n\u003cp\u003eThe unit ships with a built‑in NEMA 6-20P plug for Level 2 charging plus a NEMA 5-15 adapter so you can plug into any common household socket for Level 1 charging. Its 20‑foot heavy‑duty cable reaches across most parking spaces, and the IP65 housing keeps the electronics protected in outdoor conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded NEMA 6-20P for Level 2 (higher current) charging.\u003c\/li\u003e\n  \u003cli\u003eNEMA 5-15 adapter for standard 120V outlets (Level 1).\u003c\/li\u003e\n  \u003cli\u003e20 ft TPE cable spans a standard parking space or garage.\u003c\/li\u003e\n  \u003cli\u003eIP65 protection for rain and dust resistance outdoors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat charging speeds and controls are available?\u003c\/h3\u003e\n\u003cp\u003eChoose from multiple current levels to match your circuit and charging needs: the charger offers selectable settings that range from low trickle charge to a full 16A Level 2 option. A physical control panel with tactile buttons and an LED display lets you change amperage instantly and set a delay timer without needing a phone or app.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelectable currents: 6A, 8A, 10A, 12A, 16A (Level 2 compatible).\u003c\/li\u003e\n  \u003cli\u003eDelay timer adjustable from 1 to 12 hours for off‑peak starts.\u003c\/li\u003e\n  \u003cli\u003eLED screen shows live voltage and current readouts.\u003c\/li\u003e\n  \u003cli\u003eRemembers last setting so you don’t reconfigure each use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow safe and durable is the charger for everyday use?\u003c\/h3\u003e\n\u003cp\u003eSafety and long‑term reliability are built in: ETL certification ensures compliance with U.S. safety standards while multiple protections continuously monitor for faults. The housing and cable materials are rated to operate across a wide temperature range, making it suitable for year‑round use and unattended overnight charging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eETL certified to meet U.S. electrical safety requirements.\u003c\/li\u003e\n  \u003cli\u003eMulti‑protection system: GFCI, over‑voltage, over‑current, surge, short‑circuit, and over‑temperature protection.\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range from -22°F to 130°F for harsh environments.\u003c\/li\u003e\n  \u003cli\u003eDurable TPE cable and IP65 dust\/waterproof enclosure for outdoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this charger work with my Tesla vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe bokman charger uses the NACS connector standard, ensuring compatibility with all modern Tesla models. Verify that your intended outlet is either a NEMA 6-20 or a standard NEMA 5-15 before purchase to ensure proper plug fit and charging level.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNACS connector is compatible with Tesla vehicles.\u003c\/li\u003e\n  \u003cli\u003eNEMA 6-20 for Level 2; NEMA 5-15 adapter for Level 1.\u003c\/li\u003e\n  \u003cli\u003eConfirm outlet type at your location prior to ordering.\u003c\/li\u003e\n  \u003cli\u003eEasy plug‑and‑play setup—no electrician needed for 120V use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The bokman Tesla Charger is aimed at Tesla owners who want a portable, weatherproof charger that’s simple to operate without apps—ideal for renters, frequent travelers, RV or camping enthusiasts, and anyone who needs flexible Level 1 and Level 2 charging at home or on the road. If you value physical controls, visible live data, and a trusted ETL‑certified safety package, this charger offers a practical, no‑nonsense solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this charger with a regular household outlet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the included NEMA 5-15 adapter lets you charge at 120V (Level 1) from a standard outlet, though charging will be slower than Level 2.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the bokman charger safe to leave plugged in outdoors overnight?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it is ETL certified and IP65 rated with multi‑protection systems designed for unattended outdoor charging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"bokman","offers":[{"title":"Default Title","offer_id":67584861798585,"sku":"B0FL3GSR9F","price":263.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bokman-front-view-charger.jpg?v=1790456813"},{"product_id":"zycapatp-tpms-sensor-for-tesla-model-3-y-s-x-2020-2025-pre-programmed-2-4ghz-bluetooth-cr2450-battery","title":"ZYCAPATP TPMS Sensor for Tesla Model 3\/Y\/S\/X (2020–2025) — Pre‑programmed 2.4GHz Bluetooth, CR2450 Battery","description":"\u003cp\u003e\u003cstrong\u003eZYCAPATP TPMS Sensor is a direct-fit, pre-programmed tire pressure monitoring replacement made to restore accurate tire pressure and temperature reporting for 2020–2025 Tesla Model 3, Y, S and X vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a factory TPMS light appears or an OEM sensor fails, swapping in a compatible, reliable sensor gets your vehicle communicating correct tire data again. This ZYCAPATP sensor uses a 2.4 GHz Bluetooth chip and CR2450 cell to deliver steady readings, long battery life and a plug-and-play installation approach designed specifically to match Tesla OE part numbers for Model 3, Model Y, Model S and Model X from 2020 through 2025.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor match Tesla factory systems?\u003c\/h3\u003e\n\u003cp\u003eThe ZYCAPATP TPMS sensor is engineered to the same mounting and signal expectations as several official Tesla OE part numbers, so it behaves like the original sensor in the vehicle network. It is pre-programmed for Tesla models listed and requires no external programming tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2021–2025 Model 3, Model Y, Model S, Model X\u003c\/li\u003e\n  \u003cli\u003eMatches OE numbers such as 1472547G and 1490701-series\u003c\/li\u003e\n  \u003cli\u003ePre-programmed to simplify replacement—no dealer coding needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accuracy and data updates can I expect while driving?\u003c\/h3\u003e\n\u003cp\u003eThe sensor reports tire pressure and temperature in real time via a 2.4 GHz Bluetooth connection to the vehicle. Pressure accuracy is around ±0.72–0.75 psi, giving more actionable readings than a worn or failing factory sensor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time pressure and temperature uploads to the Tesla system\u003c\/li\u003e\n  \u003cli\u003ePressure accuracy approximately ±0.72–0.75 psi\u003c\/li\u003e\n  \u003cli\u003eStable signal frequency at 2.4 GHz for consistent updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and does it require tools or coding?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward—remove the old valve-mounted sensor and install the ZYCAPATP unit in its place. The sensor arrives pre-programmed for supported Tesla models, so you normally only need the vehicle's built-in TPMS relearn or troubleshooting routine to complete activation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play replacement—no external programmer required\u003c\/li\u003e\n  \u003cli\u003eUse Tesla’s on-screen troubleshooting\/relearn to activate\u003c\/li\u003e\n  \u003cli\u003eStandard valve stem hardware for direct swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat about battery life and operating conditions?\u003c\/h3\u003e\n\u003cp\u003eEach sensor uses a CR2450 button battery and efficient chip design to deliver a long service life, with an expected minimum of five years under normal use. Components are specified to operate across wide temperature extremes for dependable readings in hot or cold climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCR2450 battery with a typical 5-year lifespan\u003c\/li\u003e\n  \u003cli\u003eRated to function from -40°C to 125°C\u003c\/li\u003e\n  \u003cli\u003eDesigned chip stability to preserve accuracy over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who own a 2020–2025 Tesla Model 3, Model Y, Model S or Model X and need an OEM-compatible TPMS replacement without dealer programming will find this sensor appropriate. It’s also a good option for technicians and fleet managers who want consistent, accurate tire data and a straightforward swap-in installation. ZYCAPATP includes a 12-month warranty and lifetime technical support to assist with installation and any post-sale questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor work on my 2020 Tesla Model Y?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's made for 2021–2025 Model Y and compatible with many 2020–2025 Model variants; check OE number match for certainty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools or dealer coding to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required; replace the sensor and use the vehicle’s built-in TPMS relearn\/troubleshooting to activate.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ZYCAPATP","offers":[{"title":"Default Title","offer_id":67584867827897,"sku":"B0GYCM58VS","price":188.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/zycapatp-tpms-front-view.jpg?v=1790456970"},{"product_id":"spigen-under-screen-storage-organizer-for-tesla-model-y-juniper-model-3-highland-magnetic-silicone-padded","title":"Spigen Under-Screen Storage Organizer for Tesla Model Y Juniper \u0026 Model 3 Highland — Magnetic, Silicone-Padded","description":"\u003cstrong\u003eA low-profile magnetic organizer that fits under the center touchscreen of Tesla Model Y Juniper and Model 3 Highland to hold small items securely without blocking sensors.\u003c\/strong\u003e\n\n\u003cp\u003eThis Spigen under-screen storage organizer is designed to add practical, unobtrusive storage in Tesla Model Y Juniper and Model 3 Highland interiors. Built with deep silicone padding, an integrated barrier, and a precise magnetic attachment, it prevents items from rattling or falling while preserving access to the cabin temperature sensor. The piece installs in minutes and blends with the factory aesthetic for a neat, everyday upgrade.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this organizer keep items from sliding or making noise?\u003c\/h3\u003e\n\u003cp\u003eThe organizer uses deep silicone padding that cushions belongings and reduces vibration, while an added front barrier prevents items from slipping off the lip of the shelf. Together they minimize clatter and keep small objects stable during driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThick silicone lining absorbs impact and eliminates rattles.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in barrier secures phones, coins, keys, and cards.\u003c\/li\u003e\n  \u003cli\u003ePadded base stabilizes irregularly shaped items.\u003c\/li\u003e\n  \u003cli\u003eDesign avoids direct contact with the touchscreen surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installation affect my cabin temperature readings or interior sensors?\u003c\/h3\u003e\n\u003cp\u003eSpigen added a sensor cutout so the organizer doesn't block the cabin temperature sensor, helping retain accurate climate control inputs. The magnetic mount aligns precisely with the dash so no tools or adhesives are needed, and removal is quick if you need to clean the unit or access wiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccurate cutout for the cabin temperature sensor.\u003c\/li\u003e\n  \u003cli\u003eMagnetic attachment prevents permanent modification to the dash.\u003c\/li\u003e\n  \u003cli\u003eQuick snap-on\/snap-off for cleaning or repositioning.\u003c\/li\u003e\n  \u003cli\u003eNon-invasive fit preserves factory features and vents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Tesla models and trims are compatible with this Spigen storage piece?\u003c\/h3\u003e\n\u003cp\u003eThis version is engineered specifically for Tesla Model Y Juniper (Standard, Premium, Performance 2025–2026) and Model 3 Highland (Standard, Premium \u0026amp; Performance 2024–2026), plus Model Y L (Premium) 2026 with the 6-seat interior. Note a potential incompatibility with some 2026 Model 3 Premium trims delivered after July 2026.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Model Y Juniper: Standard, Premium, Performance (2025–2026).\u003c\/li\u003e\n  \u003cli\u003eFits Model 3 Highland: Standard, Premium, Performance (2024–2026) with caveat for some late-2026 Premium units.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Model Y L (Premium) 2026 6-seat interior.\u003c\/li\u003e\n  \u003cli\u003eCheck trim and delivery month for certain 2026 Model 3 Premium vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat everyday items can I store, and how does it improve daily use?\u003c\/h3\u003e\n\u003cp\u003eThe organizer provides a handy place for phones, sunglasses, key fobs, coins, and cards so they stay within reach but out of the way. Its slim profile keeps the dash uncluttered while making frequently used items easier to grab during short trips or long drives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHolds smartphones up to common sizes without blocking the display.\u003c\/li\u003e\n  \u003cli\u003eRoom for sunglasses, small wallets, cards, and loose change.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain a tidy cabin and reduces time spent searching for essentials.\u003c\/li\u003e\n  \u003cli\u003eDesign integrates seamlessly with the stock interior look.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Spigen under-screen organizer is ideal for Tesla owners who want a simple, factory-looking storage solution for everyday items—especially Model Y Juniper and Model 3 Highland drivers seeking a quiet, secure place for phones, keys, and sunglasses. It's well suited for commuters, families, and anyone who prefers minimal interior clutter without permanent modifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this block Tesla sensors or affect climate readings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—the organizer includes a cutout for the cabin temperature sensor to preserve accurate climate control readings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How is the organizer attached and removed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It uses a precise magnetic attachment for tool-free installation and quick removal for cleaning or access.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Spigen","offers":[{"title":"Default Title","offer_id":67584872612025,"sku":"B0D7N5CB6X","price":171.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/spigen-under-screen-organizer-front-view.jpg?v=1790457211"},{"product_id":"staunchauto-tesla-model-y-intake-cabin-air-filter-combo-6-piece-2020-2026-hepa-activated-carbon","title":"StaunchAuto Tesla Model Y Intake \u0026 Cabin Air Filter Combo — 6‑Piece (2020–2026) HEPA + Activated Carbon","description":"\u003cp\u003e\u003cstrong\u003eStaunchAuto's Intake \u0026amp; Cabin Air Filter Combo supplies a six-piece replacement set—four intake filters plus two cabin HEPA\/activated-carbon filters—designed to fit Tesla Model Y vehicles from 2020 through 2026 (including the 2025–2026 refresh).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit is meant to refresh both the outside intake filtration and the in-cabin air treatment in one service session. Built with layered media and coconut-shell activated carbon, the combo aims to capture particulates, reduce odors and preserve airflow while matching the fit standards of Tesla Model Y parts. The package replaces factory numbers such as 110768100A, 165837500A and 165837600A — but please check compatibility with your vehicle before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these filters improve the air inside my Tesla Model Y?\u003c\/h3\u003e\n\u003cp\u003eStaunchAuto's cabin filters combine a HEPA-style layer with activated carbon to trap fine particles and adsorb odors and gaseous contaminants. The multi-stage design aims to cut down on dust, pollen and common interior smells, improving perceived air quality for occupants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-layer cabin filter: HEPA-like media plus coconut-shell activated carbon.\u003c\/li\u003e\n  \u003cli\u003eRemoves airborne particulates and reduces odors from traffic and environments.\u003c\/li\u003e\n  \u003cli\u003eDesigned to match factory dimensions for effective sealing and airflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the intake filters and frames more durable than stock options?\u003c\/h3\u003e\n\u003cp\u003eThe intake components use quality filter paper supported by a rigid ABS frame, giving them added structural life compared with many single-use replacements. That construction helps maintain shape and filtration performance during service intervals, reducing collapse or deformation under airflow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSturdy ABS frames resist warping and hold filter media in place.\u003c\/li\u003e\n  \u003cli\u003eHigher-grade filter paper extends usable life versus basic materials.\u003c\/li\u003e\n  \u003cli\u003eFour intake filters included to fully refresh external filtration paths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these filters affect airflow, noise, or HVAC performance?\u003c\/h3\u003e\n\u003cp\u003eThe combo is engineered for low airflow resistance so the HVAC system can move air efficiently without added noise or a drop in output. Low-resistance design reduces the chance of rattle or diminished air volume that sometimes occurs with denser aftermarket media.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-resistance filter structure maintains factory airflow levels.\u003c\/li\u003e\n  \u003cli\u003eReduced HVAC noise thanks to smoother air passage through the filter media.\u003c\/li\u003e\n  \u003cli\u003eBalanced filtration-to-flow ratio minimizes system strain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace these filters and what savings can I expect?\u003c\/h3\u003e\n\u003cp\u003eStaunchAuto recommends changing the filters approximately every six months or around 12,000 miles, depending on driving conditions. Regular replacement keeps the system performing efficiently and can prevent buildup that otherwise leads to reduced air quality or heavier load on the HVAC system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuggested interval: every six months or 12,000 miles, adjust for heavy pollution exposure.\u003c\/li\u003e\n  \u003cli\u003eReplacing both intake and cabin filters at once simplifies maintenance.\u003c\/li\u003e\n  \u003cli\u003eProactive replacement helps avoid more costly repairs from clogged airflow paths.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This filter combo is made for Tesla Model Y owners (2020–2026, including the 2025–2026 refresh) who want a complete replacement set for both intake and interior air filtration. It's suited to drivers wanting longer-lasting frames, improved particulate capture and odor control without sacrificing airflow. If you prioritize straightforward maintenance, stronger filter construction and a multi-stage cabin filter with activated carbon, this kit provides a single-purchase solution to refresh your vehicle's air management system.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these filters compatible with Tesla Model Y Refresh (Juniper) 2025–2026?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit lists fitment for Model Y 2020–2026 and explicitly includes the 2025–2026 Refresh (Juniper); verify part numbers with your vehicle before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace the StaunchAuto filters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace approximately every six months or 12,000 miles, sooner in heavy-pollution or dusty environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"StaunchAuto","offers":[{"title":"Default Title","offer_id":67584874479801,"sku":"B0GCKDGC9M","price":179.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/staunchauto-front-packaging-tesla-model-y-filters.jpg?v=1790457310"},{"product_id":"dreamdash-level-2-ev-charger-for-tesla-40a-9-6kw-with-nacs-connector-25-ft-cable-ip66-weatherproof","title":"DREAMDASH Level 2 EV Charger for Tesla — 40A\/9.6kW with NACS Connector, 25 ft Cable, IP66 Weatherproof","description":"\u003cp\u003e\u003cstrong\u003eThe DREAMDASH Level 2 EV Charger is a weatherproof, smart 40A\/9.6kW Tesla-compatible home charger with a NEMA 14-50 plug and NACS connector for fast, adjustable charging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact charging unit is built for Tesla owners who want a reliable, faster home charging solution than a standard outlet. It connects with Tesla models using the NACS interface and includes a 25 ft cable with a NEMA 14-50 plug. The charger combines a clear LCD touch display, adjustable current and delayed-start scheduling, and rugged IP66 protection so it can live outdoors or in a garage.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast will this DREAMDASH charger charge my Tesla?\u003c\/h3\u003e\n\u003cp\u003eThe charger supports up to 40 amps at 240V for a maximum charging rate of 9.6 kW, which is significantly faster than a standard 120V outlet. Real-world charge speed depends on your vehicle’s onboard charger and battery state, but the higher amp setting shortens overnight or partial top-up sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum output: 40A \/ 9.6 kW (requires 50A breaker).\u003c\/li\u003e\n  \u003cli\u003eAdjustable current: 6–40A to match circuit capacity.\u003c\/li\u003e\n  \u003cli\u003e25 ft cable with NEMA 14-50 plug for flexible placement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the DREAMDASH charger compatible with all Tesla models?\u003c\/h3\u003e\n\u003cp\u003eYes—this unit uses a NACS connector, making it plug-and-play with Tesla Model 3, Y, S, and X as well as any vehicle that accepts the Tesla NACS interface. Non-NACS EVs can use the charger with a manufacturer-approved adapter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNACS connector for native Tesla compatibility.\u003c\/li\u003e\n  \u003cli\u003eWorks with NACS-compliant vehicles; adapters available for others.\u003c\/li\u003e\n  \u003cli\u003eDesigned for home use with a NEMA 14-50 outlet (RV-style).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and durability features does it include?\u003c\/h3\u003e\n\u003cp\u003eThe DREAMDASH charger is built for long-term outdoor use and includes multiple safety protections. It has ETL and RoHS\/FCC listings and an IP66-rated enclosure that resists dust and heavy rain while operating in a wide temperature range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP66 weatherproof housing, rated -22°F to 122°F operation.\u003c\/li\u003e\n  \u003cli\u003eAutomatic protections: overvoltage, overheating, short-circuit shutdown.\u003c\/li\u003e\n  \u003cli\u003eGun head durability tested over 10,000 plug cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do the smart controls and display make charging easier?\u003c\/h3\u003e\n\u003cp\u003eA large LCD touch screen shows current, voltage, power (kWh), charging time, and status in real time. You can change charging current with the touch button and set a delay timer up to 12 hours for off-peak charging or scheduled top-ups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTouch LCD displays live charging metrics and status.\u003c\/li\u003e\n  \u003cli\u003eCurrent settings: 6\/8\/10\/13\/16\/20\/24\/32\/40A selectable.\u003c\/li\u003e\n  \u003cli\u003eDelay timer increments by hour up to 12 hours for scheduled starts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this charger best for? The DREAMDASH Level 2 charger suits Tesla owners who want faster, smarter home charging without hardwiring. It's ideal for single-family garages, carport or driveway installations where a NEMA 14-50 outlet is present or can be installed. Choose this unit if you need adjustable amperage, clear on-device monitoring, and a weather-resistant design backed by two-year support from the manufacturer.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a special circuit or breaker for this charger?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The charger can draw up to 40A and requires a dedicated 50A circuit breaker and a NEMA 14-50 receptacle for safe operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I schedule charging for off-peak electricity rates?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The unit includes a delay timer up to 12 hours so you can schedule charging to start during off-peak periods.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DREAMDASH","offers":[{"title":"Default Title","offer_id":67584883523769,"sku":"B0FG829LLZ","price":484.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dreamdash-front-panel.jpg?v=1790457625"},{"product_id":"fiaypoy-center-console-organizer-for-tesla-cybertruck-2023-2025-dual-layer-tray-anti-slip-mats","title":"Fiaypoy Center Console Organizer for Tesla Cybertruck (2023–2025) — Dual-Layer Tray, Anti-Slip Mats","description":"\u003cp\u003e\u003cstrong\u003eFiaypoy Center Console Organizer for Tesla Cybertruck is a precision-fit, dual-layer storage insert that keeps the lower center console tidy, secure, and rattle-free.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis organizer is engineered specifically for Tesla Cybertruck models from 2023–2025 to make the deep lower console usable and orderly. Instead of loose items sliding to the bottom, the Fiaypoy insert divides the space into an accessible shallow tray and a larger hidden compartment, plus anti-slip mats to reduce movement and noise. Built from robust ABS plastic, it resists scuffs and temperature changes while remaining easy to clean and maintain.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this organizer improve everyday cabin storage?\u003c\/h3\u003e\n\u003cp\u003eBy turning one large, hard-to-access cavity into layered, labeled spaces, the organizer lets you separate frequent-use items from bulkier gear. Small items stay on top where you can reach them, while less-used or larger things remain in the lower compartment. The removable mats further prevent sliding and rattles, improving cabin quietness and convenience.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShallow upper tray for keys, phone, sunglasses and coins\u003c\/li\u003e\n  \u003cli\u003eDeep lower compartment for chargers, tools, cables, and bulky items\u003c\/li\u003e\n  \u003cli\u003eAnti-slip mats in each compartment to reduce movement and noise\u003c\/li\u003e\n  \u003cli\u003eDrop-in installation keeps items from scratching the console interior\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Tesla Cybertruck and is installation difficult?\u003c\/h3\u003e\n\u003cp\u003eFiaypoy’s insert is molded to match the lower center console dimensions of the Tesla Cybertruck model years 2023–2025, providing a snug, non-shifting fit. Installation is simple: drop the organizer into the console without tools and it seats into place. Removal is just as easy for cleaning or reconfiguration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-cut to Cybertruck lower console geometry\u003c\/li\u003e\n  \u003cli\u003eTool-free drop-in design for quick install and removal\u003c\/li\u003e\n  \u003cli\u003eWaterproof and dust-resistant surface for straightforward wiping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does it offer?\u003c\/h3\u003e\n\u003cp\u003eThe organizer is manufactured from heavy-duty ABS plastic chosen for toughness, dimensional stability, and impact resistance. That construction resists scratches and holds up under temperature swings, making it suitable for daily commuting and outdoor adventures alike. The removable rubberized mats add another layer of protection against abrasion and noise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty ABS shell resists impacts and temperature changes\u003c\/li\u003e\n  \u003cli\u003eRemovable anti-slip reducing mats prevent item movement\u003c\/li\u003e\n  \u003cli\u003eEasy-clean surface — wipe with a damp cloth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this change how I organize gadgets and accessories?\u003c\/h3\u003e\n\u003cp\u003eInstead of rummaging through a cavernous console, you’ll have a predictable place for phone cords, sunglasses, wallets, and charging bricks. The upper tray keeps daily essentials within reach while the larger lower area stores bulkier items, so you spend less time searching and more time driving. The anti-slip mats keep things from banging while on the road, preserving both items and cabin quiet.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTop tray for frequently used items increases accessibility\u003c\/li\u003e\n  \u003cli\u003eLower compartment stores larger gear out of sight but within reach\u003c\/li\u003e\n  \u003cli\u003eOrganized layout reduces item wear and cabin noise from rattling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Fiaypoy Center Console Organizer is intended for Tesla Cybertruck owners who want a cleaner, quieter, and more functional lower console. It’s ideal for daily commuters, road-trippers, families, and anyone who carries multiple small accessories in their vehicle and prefers a low-maintenance, durable storage solution that fits perfectly with the Cybertruck interior.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit all Tesla Cybertruck years?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it’s designed specifically for Tesla Cybertruck models 2023–2025 for a precise lower console fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I remove and clean the organizer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Absolutely — it lifts out easily, wipes clean, and features removable anti-slip mats for washing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Fiaypoy","offers":[{"title":"Default Title","offer_id":67584888733881,"sku":"B0GKHJMCNX","price":622.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fiaypoy-center-console-organizer-front-view.jpg?v=1790457742"},{"product_id":"otytkgo-ccs1-to-nacs-adapter-for-tesla-model-3-y-s-x-250kw-high-power-plug-and-play-weather-resistant","title":"Otytkgo CCS1 to NACS Adapter for Tesla Model 3\/Y\/S\/X — 250kW High‑Power Plug-and-Play, Weather‑Resistant","description":"\u003cp\u003e\u003cstrong\u003eThe Otytkgo CCS1 to NACS Adapter converts CCS1 and J1772 public or home charging stations into a NACS-compatible fast charger for Tesla Model 3, Y, S, and X with plug-and-play simplicity.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you drive a Tesla and frequently encounter CCS1 or J1772 chargers, this adapter bridges that gap so you can use a wider network of Level 3 chargers without extra setup. Built from metal and reinforced plastic with an internal safety chip, the adapter supports up to 250 kW (rated 250 V, 80 A) and is designed for repeated insertions and rougher weather conditions. It ships with a compact carrying bag, weighs about 0.9 lbs, and measures 8.1 x 3.8 x 2.2 inches — small enough for your glove box or trunk.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will my Tesla charge with this adapter?\u003c\/h3\u003e\n\u003cp\u003eCharging speed depends on the station and vehicle limits, but the adapter supports high-power DC fast charging and claims up to 250 kW peak capacity. In practice you’ll see significantly faster charge times at compatible CCS1 stations compared with standard AC charging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupport up to 250 V, 80 A (high-power DC capability)\u003c\/li\u003e\n  \u003cli\u003eDesigned for DC fast charging at public CCS1 stations\u003c\/li\u003e\n  \u003cli\u003eReportedly 30% higher efficiency than some synchronous AC adapters\u003c\/li\u003e\n  \u003cli\u003eActual speed depends on station output and vehicle charge acceptance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the adapter safe to use in different weather and frequent use?\u003c\/h3\u003e\n\u003cp\u003eThe adapter combines metal and durable plastics plus a built-in intelligent chip that manages power and safe shutdowns. It’s rated for thousands of insertions and designed to withstand common hazards like heat, cold and precipitation, although you should follow local charging-station guidance in extreme weather.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable construction endures over 20,000 insertions\u003c\/li\u003e\n  \u003cli\u003eSmart chip provides safe power-off and protection routines\u003c\/li\u003e\n  \u003cli\u003eMaterials chosen for temperature and weather resistance\u003c\/li\u003e\n  \u003cli\u003eCE, FCC and RoHS certifications for regulatory compliance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich cars and charging stations are compatible?\u003c\/h3\u003e\n\u003cp\u003eThis adapter is made specifically for Tesla vehicles with NACS inlet: Model 3, Model Y, Model S and Model X. It allows those cars to accept charging from CCS1 and J1772 charging stations commonly found in public DC fast charging networks and some home chargers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Tesla Model 3, Y, S, and X\u003c\/li\u003e\n  \u003cli\u003eWorks with CCS1 and J1772 charging stations\/adapters\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play — no extra setup or external box required\u003c\/li\u003e\n  \u003cli\u003eSecure connection designed to stay engaged during charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to carry and use day-to-day?\u003c\/h3\u003e\n\u003cp\u003eThe adapter is intentionally compact and lightweight so you can keep it in your vehicle without adding bulk. Using it is a one-touch action: plug into the station, connect to your Tesla, and charging begins under the adapter’s built-in safety controls.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWeight around 0.9 lbs and compact dimensions for easy storage\u003c\/li\u003e\n  \u003cli\u003eIncludes a carrying bag for trunk or glove-box storage\u003c\/li\u003e\n  \u003cli\u003eOne-touch plug-in operation with a smooth, firm fit\u003c\/li\u003e\n  \u003cli\u003eNo additional configuration or tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: EV owners who drive a Tesla equipped with the NACS inlet and want access to more DC fast-charging options. It’s useful for road-trippers who pass through regions with CCS1 infrastructure, commuters with access to J1772 stations, and anyone who values a compact, certified adapter that prioritizes durability and safety. If you need broader charging compatibility without swapping vehicles or relying solely on Tesla Superchargers, the Otytkgo adapter offers a practical, portable solution backed by an 18-month warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter work with my Tesla Model Y?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Otytkgo adapter is compatible with Tesla Model 3, Y, S, and X equipped with the NACS inlet.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need programming or setup to use it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No setup required—plug into a CCS1 or J1772 station and connect to your Tesla for plug-and-play charging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Otytkgo","offers":[{"title":"Default Title","offer_id":67584889159865,"sku":"B0F5Q54YDN","price":177.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/otytkgo-front-view-adapter.jpg?v=1790457762"},{"product_id":"wexyldra-dog-car-seat-cover-for-tesla-model-y-hard-bottom-backseat-hammock-waterproof-6000d-with-door-protectors-seat-extende","title":"Wexyldra Dog Car Seat Cover for Tesla Model Y — Hard-Bottom Backseat Hammock, Waterproof 6000D with Door Protectors \u0026 Seat Extende","description":"\u003cp\u003e\u003cstrong\u003eWexyldra’s Dog Car Seat Cover for Tesla Model Y is a custom-fit, hard-bottom backseat hammock with waterproof protection, door guards, and a seat extender for secure, mess-free pet travel.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned specifically for Tesla Model Y (2020–2026, including Juniper), this back-seat solution turns your rear bench into a stable, easy-to-clean travel bed for dogs while protecting doors, headrests, and floors. The reinforced rigid base prevents sagging and creates a level surface so pets can lounge comfortably; integrated door protectors and a breathable mesh window maintain interior access and airflow. Built from heavy-duty 6000D waterproof fabric and abrasion-resistant materials, the cover resists scratches, dirt, and spills and includes storage pockets and seat-belt access for practical day-to-day use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the hard bottom keep my dog safer and more comfortable?\u003c\/h3\u003e\n\u003cp\u003eThe rigid insert supports your dog’s weight evenly, eliminating the dip and instability common with soft covers. That firm platform reduces sliding, helps anxious pets settle, and creates a predictable surface for movement during turns and stops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced board prevents sagging and wobble.\u003c\/li\u003e\n  \u003cli\u003eHard-bottom locks into seat anchors for stability.\u003c\/li\u003e\n  \u003cli\u003eLevel surface makes it easier for dogs to lie down or stand.\u003c\/li\u003e\n  \u003cli\u003eCompatible with seat belts and harness attachments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cover protect my Tesla Model Y’s interior from scratches and mess?\u003c\/h3\u003e\n\u003cp\u003eYes—the Wexyldra cover offers full-coverage protection for the back seat, doors, and floor, guarding the cabin from mud, hair, claws, and spills. The heavy-duty 6000D fabric is waterproof and abrasion-resistant so it stands up to active or large dogs while remaining simple to clean.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof 6000D fabric blocks liquids and stains.\u003c\/li\u003e\n  \u003cli\u003eDoor protectors shield panels without blocking window function.\u003c\/li\u003e\n  \u003cli\u003eHard-bottom base resists scratch damage from paws.\u003c\/li\u003e\n  \u003cli\u003eMachine-washable fabric panels and wipe-clean surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and does it affect Tesla features?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires no tools: slip straps over headrests, push in seat anchors, and slide the hard-bottom into place for a snug, contoured fit. Thoughtful cutouts and Velcro openings maintain access to seat belts and side airbags so the cover works with the Model Y’s existing safety systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free setup with headrest straps and seat anchors.\u003c\/li\u003e\n  \u003cli\u003eHard base locks in place for a secure platform.\u003c\/li\u003e\n  \u003cli\u003eVelcro openings allow seat belt and airbag use.\u003c\/li\u003e\n  \u003cli\u003eDoor panels open fully with protectors attached.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat travel features help reduce pet anxiety and organize supplies?\u003c\/h3\u003e\n\u003cp\u003eA breathable mesh viewing window keeps dogs visually connected to the driver, which can lower stress on highways and in congested traffic. Built-in storage pockets keep leashes, treats, and toys within reach so everything stays organized on a trip.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMesh window improves airflow and sightlines to the front seat.\u003c\/li\u003e\n  \u003cli\u003eMultiple storage pockets for small gear and accessories.\u003c\/li\u003e\n  \u003cli\u003eSeat extender provides extra resting space for larger pets.\u003c\/li\u003e\n  \u003cli\u003eDurable, wipeable surfaces simplify cleanup after outings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Wexyldra’s Model Y dog seat cover is ideal for Tesla owners who travel with pets and want a purpose-built, durable solution that preserves their interior. It suits families with active or large dogs, frequent road trippers, and anyone who needs a stable, waterproof platform with door protection and easy maintenance. If you value a precise fit for a Model Y, full rear-seat protection, and a hard-bottom surface that keeps pets secure, this cover is designed for you.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this cover fit all Tesla Model Y model years?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s custom-designed to fit Tesla Model Y 2020–2026, including Juniper editions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I still use seat belts and airbags with the cover installed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Precise Velcro openings provide access to seat belts while preserving side airbag function.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wexyldra","offers":[{"title":"Default Title","offer_id":67584889356473,"sku":"B0FYMZDLFN","price":190.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wexyldra-model-y-front-view-installed.jpg?v=1790457763"},{"product_id":"aixine-tesla-ev-charger-nacs-27ft-level-1-2-portable-16a-240v-with-120v-adapter-ip67-weatherproof","title":"AIXINE Tesla EV Charger NACS 27ft — Level 1\u00262 Portable 16A\/240V with 120V Adapter, IP67 Weatherproof","description":"\u003cstrong\u003eAIXINE Level 1\u0026amp;2 Tesla Charger is a portable NACS-equipped EV charging cable with adjustable current, dual plug compatibility, and weatherproof construction for home and travel use.\u003c\/strong\u003e\n\n\u003cp\u003eThis compact, travel-ready EV charger pairs a NACS connector for Tesla vehicles with a NEMA 6-20 240V plug and a NEMA 5-15 120V adapter to give drivers flexible charging options. The cable supports adjustable current settings up to 16A at 240V for faster Level 2 charging, plus one-touch scheduling and a durable IP67-rated build designed to resist harsh weather. It comes with a storage bag and a two-year warranty, making it convenient for daily home charging, road trips, and backup charging when away from a dedicated station.\u003c\/p\u003e\n\n\u003ch3\u003eHow does adjustable current make charging more convenient?\u003c\/h3\u003e\n\u003cp\u003eThe charger’s onboard control lets you select between multiple amperage settings so you can adapt to household circuits or prioritize faster charge rates when available. That flexibility protects home wiring while maximizing charging speed when a 240V outlet is accessible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSelectable currents: 8A \/ 10A \/ 12A \/ 16A for different outlet capacities\u003c\/li\u003e\n  \u003cli\u003eUp to 3.68 kW power at 240V\/16A for quicker Level 2 charging\u003c\/li\u003e\n  \u003cli\u003eOne-button adjustment on the Tesla mobile charger for easy changes\u003c\/li\u003e\n  \u003cli\u003eDelayed charging option to schedule off-peak electricity use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat plugs and adapters are included, and where can I use them?\u003c\/h3\u003e\n\u003cp\u003eIncluded are a NEMA 6-20 plug for 240V circuits and a NEMA 5-15 adapter for standard 120V outlets, allowing plug-and-charge convenience in a variety of settings. The long 27 ft cable gives extra reach for garages, driveways, and public parking without needing additional extension hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNEMA 6-20 for Level 2 charging from compatible 240V outlets\u003c\/li\u003e\n  \u003cli\u003eNEMA 5-15 adapter for Level 1 plug-in to household sockets\u003c\/li\u003e\n  \u003cli\u003e27 ft overall cable length for flexible vehicle positioning\u003c\/li\u003e\n  \u003cli\u003eWaterproof storage bag included for portable transport and protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles will this charger work with?\u003c\/h3\u003e\n\u003cp\u003eThe cable uses the North American Charging Standard (NACS) connector, so it connects seamlessly to all Tesla models and any EV adopting NACS. It is not compatible with non-NACS connectors without a separate adapter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with Tesla Model S, 3, X, Y and Cybertruck\u003c\/li\u003e\n  \u003cli\u003eCompatible with other NACS-equipped electric vehicles\u003c\/li\u003e\n  \u003cli\u003eBuilt-in wireless port control opens Tesla charging ports from the connector\u003c\/li\u003e\n  \u003cli\u003eNot compatible with non-NACS EV inlets without third-party adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow safe and rugged is the AIXINE portable charger?\u003c\/h3\u003e\n\u003cp\u003eThe charger meets recognized safety and electromagnetic standards and uses high-quality materials to withstand everyday use and challenging weather. It includes multiple automatic protections to reduce risk from common electrical faults and is built for long-term reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eETL certified and FCC listed; meets UL safety requirements\u003c\/li\u003e\n  \u003cli\u003eAdvanced protections against overvoltage, overheating, and short circuits\u003c\/li\u003e\n  \u003cli\u003e99.95% oxygen-free copper cores with TPU-coated heavy-duty cable\u003c\/li\u003e\n  \u003cli\u003eIP67 rating for water and dust resistance; rated -40°F to 131°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own a Tesla or any NACS-compatible EV and need a flexible, portable charging solution for home, travel, or emergency backup. It’s ideal for people who want the convenience of plug-and-play charging with adjustable power settings, a long cable for easy parking access, and a weatherproof build that travels well. If you rely on off-peak charging, have mixed 120V\/240V access, or need a dependable charger to carry in your trunk, the AIXINE Level 1\u0026amp;2 Tesla Charger balances performance, safety, and portability.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this charger on a regular 120V household outlet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. A NEMA 5-15 adapter is included so you can charge from standard 120V outlets at selectable lower currents.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this charger work with any Tesla model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The charger uses the NACS connector and is compatible with all Tesla models and other NACS-equipped vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AIXINE","offers":[{"title":"Default Title","offer_id":67584894009529,"sku":"B0G4MFC46P","price":367.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/aixine-front-view-packaged-charger.jpg?v=1790457998"},{"product_id":"jowua-active-cooling-magnetic-qi2-wireless-car-charger-mount-for-tesla-s-3-x-y-cybertruck-invisible-foldaway-15w","title":"Jowua Active Cooling Magnetic Qi2 Wireless Car Charger Mount for Tesla S\/3\/X\/Y\/Cybertruck — Invisible Foldaway, 15W","description":"\u003cp\u003e\u003cstrong\u003eJowua Active Cooling 6D is a retractable, qi2-capable magnetic car mount and wireless charger engineered to hide behind Tesla center screens while actively cooling phones for efficient 15W charging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned specifically for Tesla S\/3\/X\/Y and Cybertruck interiors, this invisible foldaway mount secures to smooth screen backs with a washable suction cup, routes a USB‑C cable under the floor liner, and extends with a durable metal arm to bring MagSafe-style charging to your dash without altering Tesla’s minimalist look.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Jowua mount keep my phone cool while charging?\u003c\/h3\u003e\n\u003cp\u003eThe mount combines a semiconductor cooling panel with a silent circulation fan to reduce surface temperature during wireless charging. Lower operating temperatures help maintain consistent power delivery and reduce thermal throttling in compatible phones.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt-in semiconductor cooling panel for immediate chilled contact.\u003c\/li\u003e\n  \u003cli\u003eLow-noise fan circulates air without audible distraction.\u003c\/li\u003e\n  \u003cli\u003eSilicone contact surface increases heat transfer and grip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this charger work with my iPhone or Android device?\u003c\/h3\u003e\n\u003cp\u003eYes — the charger is upgraded to the Qi2 standard and supports magnetic alignment like MagSafe, delivering up to 15W where the phone and case allow. It supports a wide range of Qi-enabled Android phones and the latest iPhone models with magnetic charging compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQi2-standard wireless charging for faster, more efficient power transfer.\u003c\/li\u003e\n  \u003cli\u003eMagnetic alignment compatible with MagSafe-equipped iPhones and magnet-compatible cases.\u003c\/li\u003e\n  \u003cli\u003eUp to 15W wireless output for supported devices; actual speed varies by device.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does installation and cable routing work in a Tesla?\u003c\/h3\u003e\n\u003cp\u003eThe mount uses an ultra-sticky, washable suction cup to attach to the smooth back of Tesla center screens; it’s not suitable for textured materials like leather or wood. A hidden floor-liner channel allows you to extend and conceal the USB‑C cable from the rear port to the front mount for a factory‑clean appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWashable suction cup for strong, residue-free adhesion on smooth surfaces.\u003c\/li\u003e\n  \u003cli\u003eExclusive hidden floor-liner design to neatly tuck the cable under the liner.\u003c\/li\u003e\n  \u003cli\u003eRetractable arm adjusts length quickly to achieve ideal sightlines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the mount discreet and durable inside Tesla cabins?\u003c\/h3\u003e\n\u003cp\u003eThe design fully retracts into an invisible position so the mount is hidden when not in use, preserving Tesla’s minimalist interior. Premium metal in the adjustable arm resists wear, while the smooth silicone pad prevents slippage when the phone is docked.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInvisible foldaway form keeps the mount out of sight when parked or not charging.\u003c\/li\u003e\n  \u003cli\u003eDurable metal arm with pull\/push extension for stable positioning.\u003c\/li\u003e\n  \u003cli\u003eSilicone surface increases friction and protects device finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Jowua Active Cooling 6D mount is for Tesla owners who want a seamless, high-performance wireless charging solution that preserves factory aesthetics. It's ideal if you value discreet installation, enhanced thermal control during charging, magnetic alignment for MagSafe-style convenience, and a tidy cable routing solution. If your Tesla has a smooth touchscreen back and you want up to 15W Qi2 charging with active cooling and an invisible profile, this mount is made for you.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the mount compatible with all Tesla models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits Tesla S\/3\/X\/Y and Cybertruck screens with smooth backs; avoid textured materials like leather or wood.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What charging speed can I expect?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Up to 15W wireless charging for Qi2-compatible phones; actual power depends on your device and case.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Jowua","offers":[{"title":"Default Title","offer_id":67584895123641,"sku":"B0FTFZ5XJD","price":219.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/jowua-front-profile-mount.jpg?v=1790458065"},{"product_id":"ljh-nacs-to-ccs1-adapter-for-tesla-superchargers-500a-1000v-high-power-ip54-weatherproof","title":"LJH NACS to CCS1 Adapter for Tesla Superchargers — 500A\/1000V High-Power, IP54 Weatherproof","description":"\u003cp\u003e\u003cstrong\u003eThe LJH NACS to CCS1 adapter lets CCS1-equipped EVs access Tesla Supercharger V1–V4 stations at up to 500A\/1000V for fast DC charging on compatible networks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for cross-protocol charging, this rugged adapter bridges the NACS (Tesla) connector and the CCS1 inlet common on many North American EVs. Built with automotive-grade components, IP54 weather resistance, and thermal protections, it provides a practical solution for drivers who need wider access to fast-charging infrastructure while traveling or commuting.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast can this adapter charge my EV?\u003c\/h3\u003e\n\u003cp\u003eThe LJH adapter supports a maximum 500A and up to 1000V DC, allowing high-power Superchargers to deliver rapid energy transfer when the vehicle and station permit. Charging speed depends on your vehicle's battery management system, current state of charge, and the specific Supercharger version available.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for peak 500A\/1000V DC throughput\u003c\/li\u003e\n  \u003cli\u003eDesigned to enable ultra-fast Supercharger sessions where vehicle and station allow\u003c\/li\u003e\n  \u003cli\u003eThermal auto-shutoff at 140°F to protect components during extended high-power use\u003c\/li\u003e\n  \u003cli\u003eActual range added varies by vehicle model, battery size, and Supercharger load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and stations will this adapter work with?\u003c\/h3\u003e\n\u003cp\u003eThis adapter is intended to connect CCS1-equipped electric vehicles to Tesla Superchargers using the NACS plug family (V1–V4). It’s compatible with many North American models that accept CCS1, but vehicle firmware or manufacturer restrictions may affect functionality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommonly compatible: Ford F-150 Lightning, GM EVs, Rivian R1T\/R1S\u003c\/li\u003e\n  \u003cli\u003eAlso supports select Hyundai, Kia, Volvo and other CCS1 vehicles—confirm with your OEM\u003c\/li\u003e\n  \u003cli\u003eWorks with Tesla Supercharger V1 through V4 networks that support third-party adapters\u003c\/li\u003e\n  \u003cli\u003eAlways verify compatibility with your vehicle and the Supercharger station before use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the adapter safe and durable for regular use?\u003c\/h3\u003e\n\u003cp\u003eSafety and longevity were priorities in the LJH design: the adapter uses automotive-grade materials, weatherproofing, and built-in thermal protection to minimize risk during frequent charging. It’s engineered for long-term use across a wide temperature range, and comes with a 2-year warranty plus 24\/7 support.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP54 weatherproof rating protects against dust and splashing rain\u003c\/li\u003e\n  \u003cli\u003eOperates reliably from −40°F to 122°F ambient temperatures\u003c\/li\u003e\n  \u003cli\u003eAutomatic shutoff at high temperature to prevent overheating\u003c\/li\u003e\n  \u003cli\u003e2-year warranty and round-the-clock expert customer support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during real-world use and installation?\u003c\/h3\u003e\n\u003cp\u003eUsing the adapter requires a compatible CCS1 vehicle and access to Tesla Superchargers that accept third-party adapters. The unit is plug-and-play at the charging point, but vehicle restrictions, station policies, or firmware locks can limit charging rates or access in some cases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug the adapter onto the Tesla Supercharger nozzle, then connect to your vehicle’s CCS1 inlet\u003c\/li\u003e\n  \u003cli\u003eNo permanent vehicle modification required—adapter is a portable accessory\u003c\/li\u003e\n  \u003cli\u003eMonitor charging session on your vehicle’s dashboard for power and session time\u003c\/li\u003e\n  \u003cli\u003eCheck OEM guidance and Supercharger availability before planning long trips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own CCS1-equipped EVs (for example, Ford F-150 Lightning, GM models, Rivian R1T\/R1S, and certain Hyundai\/Kia\/Volvo vehicles) and need reliable access to Tesla’s Supercharger network. It’s ideal for frequent road-trippers, fleet operators, and anyone who wants a durable, high-power adapter with warranty-backed support. Always confirm compatibility with your vehicle manufacturer and local Supercharger policies before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter let my Ford\/GM\/Rivian charge at Tesla Superchargers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for many CCS1 models—compatibility depends on your vehicle’s OEM firmware and the specific Supercharger’s policies. Verify before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the adapter work in bad weather?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It has an IP54 rating and operates across −40°F to 122°F, offering protection from dust and light rain.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LJH","offers":[{"title":"Default Title","offer_id":67584901710009,"sku":"B0F5QDL5Y2","price":209.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ljh-adapter-front-view.jpg?v=1790458329"},{"product_id":"bokman-tesla-nacs-extension-cord-21ft-50a-240v-12kw-outdoor-rated-for-model-3-y-s-x-cybertruck","title":"bokman Tesla NACS Extension Cord 21ft 50A — 240V 12kW Outdoor-Rated for Model 3\/Y\/S\/X\/Cybertruck","description":"\u003cstrong\u003ebokman 21FT 50A NACS extension cord adds 21 feet of high-power reach to your Tesla charging setup while supporting full 50A, 240V charging.\u003c\/strong\u003e\n\nWhether your wall charger, mobile connector or public Level 2 station sits farther than the factory cable reaches, this extension gives you the extra length you need without sacrificing charging power. Built for the Tesla NACS (North American Charging Standard) connector and rated for 50 amps and up to 12 kW, the cord is weatherproof and designed to work with Model 3, Y, S, X and Cybertruck. Note: it is not compatible with Tesla Superchargers and does not have a release button on the plug—always stop charging from the car or app before unplugging.\n\n\u003ch3\u003eHow does this extension cord maintain full charging power?\u003c\/h3\u003e\n\u003cp\u003eThe bokman extension uses heavy-gauge conductors and quality insulation to prevent voltage drop, enabling continuous 50A, 240V charging up to 12 kW. It’s engineered to match the electrical requirements of Tesla home and destination chargers so you don’t lose charging speed by adding length.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for 50A and 240V, supporting up to 12 kW continuous power\u003c\/li\u003e\n  \u003cli\u003eHeavy-gauge wiring to minimize voltage drop over 21 feet\u003c\/li\u003e\n  \u003cli\u003eDesigned to work with Tesla Wall Connector, Mobile Charger, and Destination Chargers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this safe to use outdoors and in cold or hot climates?\u003c\/h3\u003e\n\u003cp\u003eYes — the cable is built to withstand harsh weather and temperature extremes. With an IPX5 water-resistance rating and an operating temperature range from -30°C to +50°C, it’s suitable for outdoor charging in rain, snow or heat when used per safety guidelines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIPX5-rated for spray resistance and outdoor durability\u003c\/li\u003e\n  \u003cli\u003eWide -30°C to +50°C operating range for seasonal reliability\u003c\/li\u003e\n  \u003cli\u003eRugged jacket and robust connectors for repeated outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this plug work with all Tesla models and chargers?\u003c\/h3\u003e\n\u003cp\u003eThe bokman extension is built to the Tesla NACS specification and is compatible with Model 3, Y, S, X and Cybertruck. It functions as an extension between your existing charger and the vehicle, but it will not serve as a charging station or replace Supercharger connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits NACS-equipped Tesla vehicles and chargers\u003c\/li\u003e\n  \u003cli\u003eUse it as an inline extension between your charger and vehicle\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Supercharger stalls or non-NACS fast-charge systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I connect and disconnect the extension safely?\u003c\/h3\u003e\n\u003cp\u003eConnecting is plug-and-play: attach the charger to the extension’s inlet and plug the extension into the car. For safety the bokman plug locks while charging and does not include a mechanical release button; you must stop charging from your Tesla’s controls or app before unplugging to release the lock.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug charger into extension inlet, then plug extension into vehicle\u003c\/li\u003e\n  \u003cli\u003eStop charging on vehicle screen or Tesla app before unplugging\u003c\/li\u003e\n  \u003cli\u003eLocking plug reduces accidental disconnects outdoors\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for? If your garage layout, driveway or a public Level 2 parking spot puts the charger out of reach of the factory cable, the bokman 21FT 50A NACS extension is made for you. It’s aimed at Tesla owners who need extra reach without compromising the charge rate, and who want a weather-resistant, heavy-duty cord for year-round use. Avoid using this extension with Superchargers and follow vehicle instructions for safe disconnect procedures.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this extension with Tesla Superchargers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This NACS extension is not compatible with Tesla Superchargers and should not be used at Supercharger stalls.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to press a button to unplug the extension?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The extension lock requires you to stop charging via your car or app before unplugging to release the connector.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"bokman","offers":[{"title":"Default Title","offer_id":67584902791353,"sku":"B0DTHR6TRK","price":388.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bokman-front-view-nacs-extension.jpg?v=1790458395"},{"product_id":"rvgolf-cabin-air-filters-for-tesla-model-y-2020-2026-6-pack-multi-layer-low-resistance","title":"RVgolf Cabin Air Filters for Tesla Model Y 2020–2026 — 6-Pack Multi-Layer Low-Resistance","description":"\u003cp\u003e\u003cstrong\u003eRVgolf 6 PCS cabin air filters for Tesla Model Y (2020–2026) are replacement in-cabin filters built with multi-layer media to refresh interior air while maintaining low airflow resistance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese aftermarket cabin air filters are designed specifically to match the filter housings in Tesla Model Y vehicles from 2020 through the 2026 refresh (Juniper). Each kit includes six filters so you can complete multiple scheduled changes or keep spares on hand. The construction uses layered filter media to trap particulates and minimize noise from the HVAC system while remaining easy for owners to swap in a few simple steps.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Tesla Model Y years and versions will these filters fit?\u003c\/h3\u003e\n\u003cp\u003eThis RVgolf filter set is compatible with Tesla Model Y model years 2020, 2021, 2022, 2023, 2024, 2025 and the 2025–2026 Model Y Refresh (Juniper) launch. Confirm fitment by comparing the part references if you are uncertain.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits standard and refreshed Model Y cabin filter housings through 2026.\u003c\/li\u003e\n  \u003cli\u003eReference replacement part numbers 165837500A and 165837600A to verify compatibility.\u003c\/li\u003e\n  \u003cli\u003eSold as a six-piece kit for multiple replacements or spares.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the multi-layer construction benefit cabin air quality?\u003c\/h3\u003e\n\u003cp\u003eMulti-layer media combines different materials to capture a range of airborne particles, helping to reduce dust and larger debris inside the HVAC system. While not a medical device, the layered design improves filtration efficiency for typical in-cabin particulates and helps preserve the HVAC components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOuter layer catches hair and larger dust particles.\u003c\/li\u003e\n  \u003cli\u003eInner layers trap finer particulates and airborne debris.\u003c\/li\u003e\n  \u003cli\u003eMaterials selected to balance filtration with airflow to avoid strain on the fan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these filters affect HVAC noise or airflow in my Tesla?\u003c\/h3\u003e\n\u003cp\u003eRVgolf filters are engineered with low-resistance profiles so they do not significantly impede airflow and thereby limit added noise from the climate system. The quieter operation is a result of both the material choice and the airflow-friendly pleat design.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-resistance pleat layout reduces turbulence and sound during operation.\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain factory-like airflow characteristics.\u003c\/li\u003e\n  \u003cli\u003eHelps avoid extra load on the blower motor compared with restrictive filters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eInstallation is straightforward and intended for drivers who perform basic maintenance: the filter swaps are quick and require minimal tools. Although this kit is developed to match OEM form factors, always check fitment and part numbers before installation to ensure proper seating and performance.\u003c\/p\u003e\n\n\u003cp\u003eWho is this for: Drivers and fleet owners of Tesla Model Y vehicles who want an affordable supply of replacement cabin filters for routine maintenance. This six-pack is ideal for owners who perform DIY upkeep, service shops that need multiple replacements on hand, and anyone who prefers to change filters on a 12-month or 12,000-mile schedule to help preserve HVAC performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I replace these cabin filters in my Model Y?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replace every 12 months or about 12,000 miles as a general guideline, or sooner in dusty conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these RVgolf filters compatible with the 2026 Model Y Refresh?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, they are listed as compatible with the 2025–2026 Model Y Refresh (Juniper); verify part numbers before buying.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"RVgolf","offers":[{"title":"Default Title","offer_id":67584905281721,"sku":"B0FN6Z63FW","price":190.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rvgolf-front-packaging-tesla-model-y-cabin-filter.jpg?v=1790458533"},{"product_id":"evdance-nacs-extension-cord-for-tesla-40ft-50a-240v-ip66-weatherproof-12kw-level-2-charging","title":"EVDANCE NACS Extension Cord for Tesla 40ft 50A 240V — IP66 Weatherproof, 12kW Level 2 Charging","description":"\u003cp\u003e\u003cstrong\u003eEVDANCE 40ft 50A NACS extension cord gives Tesla owners a safe, weatherproof way to add 40 feet of 240V charging reach for more flexible parking and easier cable routing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eMany Tesla drivers need extra length between the car and their charger to park more conveniently or to reach wall connectors and destination chargers without stretching cables across driveways. The EVDANCE extension cable is built to handle high-power Level 2 charging at up to 50 amps (240V) while staying durable outdoors thanks to robust materials and an IP66 rating. It’s designed specifically for NACS-equipped Teslas and common high-power chargers, and it includes a carry case for tidy storage.\u003c\/p\u003e\n\n\u003ch3\u003eHow much power and distance does this extension provide?\u003c\/h3\u003e\n\u003cp\u003eThis cable extends charging reach by 40 feet and supports up to 50 amps at 240 volts, delivering up to roughly 12 kW of charging capacity when paired with compatible Level 2 chargers. That makes it suitable for faster home or destination charging sessions where extra cable length is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 40 ft (12.2 m) extension between charger and vehicle\u003c\/li\u003e\n  \u003cli\u003eCurrent: up to 50 A; Voltage: 240 V\u003c\/li\u003e\n  \u003cli\u003eApprox. maximum power delivery: 12 kW depending on source charger\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Tesla models and chargers is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe EVDANCE NACS extension is made for Tesla vehicles using the North American Charging Standard (NACS), including Model 3, Model Y, Model S, and Model X with that inlet. It works with Tesla Wall Connector, Tesla Destination Connector, and EVDANCE EV chargers that use NACS. It is not compatible with Tesla Gen 1\/Gen 2 Mobile Connectors or Tesla Superchargers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible vehicles: Tesla Model 3, Y, S, X (NACS port)\u003c\/li\u003e\n  \u003cli\u003eCompatible chargers: Tesla Wall Connector, Destination Connector, EVDANCE chargers\u003c\/li\u003e\n  \u003cli\u003eNot compatible with: Tesla Gen 1\/Gen 2 Mobile Connectors, Tesla Superchargers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the cable durable and safe for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe cable’s outer jacket is made from high-strength TPE rated UL 94 V-0 and the conductors use 5-micron silver-plated copper for reliable conductivity and wear resistance. An IP66 waterproof rating protects the connector from strong water jets and heavy dust, so it’s suitable for outdoor installations and regular use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOuter material: TPE with UL 94 V-0 flammability rating\u003c\/li\u003e\n  \u003cli\u003eConductors: 5-micron silver-plated copper for good conductivity\u003c\/li\u003e\n  \u003cli\u003eIngress protection: IP66 weather resistance for outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat controls or features does the cable include?\u003c\/h3\u003e\n\u003cp\u003eThe connector includes a manual release button that helps unplug the plug from the vehicle when needed, but it does not operate the Tesla charge port door. The package also contains a zippered carrying case so you can store and transport the cable neatly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnector button: releases connector from car (does not open charge port door)\u003c\/li\u003e\n  \u003cli\u003eStorage: included carrying case for organized transport\u003c\/li\u003e\n  \u003cli\u003eWarranty \u0026amp; support: EVDANCE offers a 1-year quality warranty and 24\/7 support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this extension is for: Drivers who own NACS-equipped Teslas and need reliable extra reach for home, workplace, or destination charging will benefit from this extension—especially if you want a robust outdoor-ready cable that supports higher charging currents. It’s ideal for households where the parking spot is set back from the wall connector, for shared garages, or for drivers who prefer flexible cable routing without compromising power delivery. If you require compatibility with Tesla mobile adapters or Superchargers, choose alternative solutions—this extension is intended for Level 2 NACS setups.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this extension with Tesla Superchargers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This extension is designed for Level 2 NACS chargers like Tesla Wall Connector and destination chargers, not for Tesla Superchargers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the button on the connector open my Tesla's charge port?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The button helps release the connector from the car but does not operate the vehicle's charge port door.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVDANCE","offers":[{"title":"Default Title","offer_id":67584907804857,"sku":"B0CTLQKVFP","price":557.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evdance-front-connector-and-packaging.jpg?v=1790458640"},{"product_id":"wekar-tesla-model-3-floor-mats-2018-2023-tpe-all-weather-3-piece-custom-fit-liners","title":"Wekar Tesla Model 3 Floor Mats (2018–2023) TPE All-Weather 3-Piece Custom Fit Liners","description":"\u003cp\u003e\u003cstrong\u003eWekar Floor Mats for Tesla Model 3 (2018–2023) are three-piece, vehicle-specific TPE liners that protect cabin carpets from water, snow, mud and daily wear while staying securely in place.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Wekar mats are sculpted from premium thermoplastic elastomer (TPE) using 3D-scanned patterns of the Model 3 (2018–2023) to ensure precise coverage and fit. Designed as an all-weather solution, the liners combine high sidewalls, deep containment channels and a textured, anti-slip backing so spills and debris remain contained and the mats do not shift underfoot. They do not fit the 2024 Highland Model 3.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these mats handle wet and muddy conditions?\u003c\/h3\u003e\n\u003cp\u003eThe raised lips and deep channels trap water, slush and road grime away from your carpet, preventing pooling and making post-trip cleanup fast. TPE material resists moisture and won't absorb stains or odors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh sidewalls capture liquids and snow at the edges.\u003c\/li\u003e\n  \u003cli\u003eDeep grooves channel debris into reserve troughs.\u003c\/li\u003e\n  \u003cli\u003eWaterproof TPE wipes clean or rinses off without damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the Wekar liners stay put while driving?\u003c\/h3\u003e\n\u003cp\u003eYes—these mats include an anti-slip textured surface and vehicle-specific anchoring points so they remain stable underfoot. The tailored fit minimizes movement around pedals and seat mounts for safer driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision 3D-fit follows Model 3 floor contours closely.\u003c\/li\u003e\n  \u003cli\u003eAnti-slip backing reduces lateral shifting during use.\u003c\/li\u003e\n  \u003cli\u003eIntegrated anchor locations align with Tesla mounting points.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy are these mats to clean and maintain?\u003c\/h3\u003e\n\u003cp\u003eMaintaining the Wekar mats is straightforward: non-stick TPE wipes clean with a damp cloth or hose rinse and air-dry quickly. Their durable composition resists scratching and long-term wear so cleaning stays effective over many seasons.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-porous surface resists staining and odor retention.\u003c\/li\u003e\n  \u003cli\u003eSimple rinse, wipe, or vacuum for everyday maintenance.\u003c\/li\u003e\n  \u003cli\u003eDurable TPE resists cracking, fading and abrasion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these compatible with every Model 3 year?\u003c\/h3\u003e\n\u003cp\u003eThese Wekar floor liners are custom-designed to fit Tesla Model 3 vehicles from 2018 through 2023 using advanced scanning for accurate contours. They are not compatible with the 2024 Highland Model 3—confirm your vehicle year before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpecifically modeled for Model 3, 2018–2023.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for the 2024 Highland variant.\u003c\/li\u003e\n  \u003cli\u003eThree-piece set covers front and rear footwells comprehensively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own a Tesla Model 3 (2018–2023) and want a durable, low-maintenance floor protection solution that keeps carpets dry and clean in varied weather. These mats suit commuters, families, outdoor enthusiasts, rideshare drivers and anyone seeking a precise, secure, all-weather liner that preserves interior value without custom installation or complicated upkeep.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Wekar Model 3 mats fit the 2024 Highland?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These Wekar liners are designed for Tesla Model 3 years 2018–2023 and are not compatible with the 2024 Highland.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean the Wekar TPE mats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Wipe with a damp cloth or rinse with water; air-dry. TPE resists stains and doesn't absorb odors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wekar","offers":[{"title":"Default Title","offer_id":67584914489529,"sku":"B0DZBRVNHF","price":227.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wekar-front-packaging-view.jpg?v=1790458913"},{"product_id":"wekar-tesla-model-3-floor-mats-2018-2023-6-piece-all-weather-tpe-set-full-coverage","title":"Wekar Tesla Model 3 Floor Mats (2018–2023) — 6-Piece All-Weather TPE Set, Full Coverage","description":"\u003cp\u003e\u003cstrong\u003eWekar's 6-piece TPE floor mat kit provides custom-fit, all-weather protection for Tesla Model 3 (2018–2023) interiors, including front, rear, cargo and sub-trunk coverage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned specifically for the Tesla Model 3 (2018–2023) using 3D scan data, this full-set mat package shields carpets from water, mud, snow and daily wear. Constructed from durable, non-toxic TPE, the liners lock into factory anchoring points and feature raised edges and deep channels to trap spills and debris. The set does not fit 2024 Highland models—verify your vehicle year before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these mats keep my Tesla clean in bad weather?\u003c\/h3\u003e\n\u003cp\u003eThe deep channeling and raised sidewalls of each mat collect liquids, grit and slush so contaminants stay off your carpet. The waterproof TPE material repels moisture while the textured surface slows shifting underfoot.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeep grooves channel fluids away from shoes and carpet\u003c\/li\u003e\n  \u003cli\u003eHigh walls contain mud, snow and spilled liquids\u003c\/li\u003e\n  \u003cli\u003eWaterproof, scratch-resistant TPE resists seasonal damage\u003c\/li\u003e\n  \u003cli\u003eEasy rinse-off surface for quick cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these mats fit securely in my Model 3 without sliding?\u003c\/h3\u003e\n\u003cp\u003eYes — Wekar used vehicle-specific measurements and anchoring compatibility to ensure a snug fit. Each mat includes an anti-slip backing and aligns with Tesla’s factory retention points so the liners stay put during everyday driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3D-scanned contours match Model 3 floor geometry (2018–2023)\u003c\/li\u003e\n  \u003cli\u003eAnti-slip textured underside reduces movement\u003c\/li\u003e\n  \u003cli\u003eCompatible with original anchoring points for added security\u003c\/li\u003e\n  \u003cli\u003ePrecision cut around seat mounts and pedals for unobstructed use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I clean and maintain these floor liners?\u003c\/h3\u003e\n\u003cp\u003eMaintenance is straightforward: shakes, brushes or a quick hose-down return the mats to like-new condition. The non-porous TPE resists stains and odors, so routine care is minimal and requires no special cleaners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWipe with a damp cloth for light dirt\u003c\/li\u003e\n  \u003cli\u003eRinse with water for mud, salt, or heavy grime\u003c\/li\u003e\n  \u003cli\u003eAir dry; TPE won’t warp or absorb moisture\u003c\/li\u003e\n  \u003cli\u003eDurable surface resists cracking, peeling, and fading\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly is included and which Model 3 years are covered?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains six pieces: driver and passenger front mats, full rear row mat(s), a cargo area liner and a sub-trunk mat. It’s tailored for Tesla Model 3 vehicles from 2018 through 2023 and is not compatible with the 2024 Highland update.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6-piece set: front pair, rear coverage, cargo and sub-trunk liners\u003c\/li\u003e\n  \u003cli\u003eVehicle-specific design for Model 3 (2018–2023 only)\u003c\/li\u003e\n  \u003cli\u003eNon-toxic, odor-neutral TPE material\u003c\/li\u003e\n  \u003cli\u003eDesigned to preserve original carpet and resale value\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own a Tesla Model 3 (2018–2023) and want robust, low-maintenance interior protection year-round. This set suits commuters exposed to wet or snowy conditions, pet owners, families, and anyone looking to protect their vehicle’s resale value without compromising fit or interior aesthetics. If you own a 2024 Highland Model 3, consider a fit designed for that year instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these mats fit the 2024 Model 3 Highland?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Wekar 6-piece set fits Tesla Model 3 from 2018–2023 only and is not compatible with the 2024 Highland.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I wash the mats with a hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Rinse with water or wipe with a damp cloth; air dry—TPE resists warping and stains.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wekar","offers":[{"title":"Default Title","offer_id":67584914620601,"sku":"B0DZB61YJ2","price":323.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wekar-front-mats-model3.jpg?v=1790458912"},{"product_id":"wekar-tesla-model-y-floor-mats-5-seat-2020-2024-custom-fit-tpe-all-weather-3-piece-liners","title":"Wekar Tesla Model Y Floor Mats 5‑Seat (2020–2024) — Custom Fit TPE All‑Weather 3‑Piece Liners","description":"\u003cp\u003e\u003cstrong\u003eWekar Floor Mats for Tesla Model Y 5‑Seat (2020–2024) are custom‑molded, all‑weather TPE front and rear liners designed to trap water, mud, and snow while staying firmly in place.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese three‑piece liners are engineered specifically for the Tesla Model Y 5‑seat layout using precise 3D scanning so the mats contour to footwells, anchors, and door thresholds. Constructed from durable, non‑porous TPE, they resist scratches, hold up to seasonal grime, and clean easily by rinsing or wiping. The set protects original carpeting without compromising pedal clearance or interior lines.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these Wekar mats fit the Model Y accurately?\u003c\/h3\u003e\n\u003cp\u003eWekar uses vehicle‑specific measurements and advanced 3D scanning to match the Model Y 2020–2024 5‑seat floor plan, so each piece aligns with factory mounting points and interior seams. This tailored shape prevents shifting and coverage gaps common with universal mats.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade for Model Y 5‑seat (not compatible with 7‑seat versions)\u003c\/li\u003e\n  \u003cli\u003ePrecision cut to accommodate factory anchors and pedal zones\u003c\/li\u003e\n  \u003cli\u003eAnti‑slip backing and raised edges lock mats in place\u003c\/li\u003e\n  \u003cli\u003eThree‑piece layout covers both front footwells and rear bench area\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and performance can I expect in different weather?\u003c\/h3\u003e\n\u003cp\u003eThe high sidewalls and deep channel pattern trap liquids, sand, and grime so spills and tracked‑in snow stay on the liner instead of soaking into carpet. The TPE composition remains flexible in cold climates and resists heat degradation in summer, offering stable protection year‑round.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof, dustproof, and snow‑resistant TPE material\u003c\/li\u003e\n  \u003cli\u003eRaised lips channel liquids away from carpet fibers\u003c\/li\u003e\n  \u003cli\u003eScratch‑resistant surface stands up to boots and cargo\u003c\/li\u003e\n  \u003cli\u003eWorks across seasonal temperature ranges without cracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and maintain Wekar floor liners?\u003c\/h3\u003e\n\u003cp\u003eInstallation is quick: lay each mat into its matching footwell and secure with the vehicle’s anchoring points; no trimming required. Cleaning is low effort — a quick rinse, hose down, or wipe keeps the liners looking new with minimal drying time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop‑in installation with precise anchor alignment\u003c\/li\u003e\n  \u003cli\u003eNon‑stick surface wipes clean; rinses with water\u003c\/li\u003e\n  \u003cli\u003eLightweight pieces for easy removal and replacement\u003c\/li\u003e\n  \u003cli\u003eDurable for frequent cleaning without warping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these mats safe and stable during driving?\u003c\/h3\u003e\n\u003cp\u003eTextured top surfaces and an anti‑slip backing improve foot traction and reduce movement underfoot, helping maintain consistent pedal feel. The design respects factory clearance around pedals and seats so normal driving motion and seat adjustments are unaffected.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTextured tread improves traction for shoes\u003c\/li\u003e\n  \u003cli\u003eAnti‑slip underside resists lateral sliding\u003c\/li\u003e\n  \u003cli\u003eEngineered for correct pedal and seat clearance\u003c\/li\u003e\n  \u003cli\u003eStable anchor points help prevent mat migration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers who own a Tesla Model Y 5‑seat (model years 2020–2024) and want a durable, easy‑to‑clean liner system that preserves factory carpet, handles all seasons, and installs without trimming. These mats suit daily commuters, families, pet owners, and anyone looking to keep their Model Y interior tidy without compromising fit or functionality.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these mats fit the 7‑seat Model Y?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This 3‑piece set is custom for the 5‑seat Tesla Model Y (2020–2024) and does not fit 7‑seat layouts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean the Wekar TPE floor mats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Remove the mats, shake off debris, then rinse with water or wipe with a damp cloth. Air dry before reinstalling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wekar","offers":[{"title":"Default Title","offer_id":67584914817209,"sku":"B0DZ6YZGSC","price":231.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wekar-model-y-front-overview.jpg?v=1790458914"},{"product_id":"richeer-bluetooth-tpms-tire-pressure-sensors-for-tesla-model-3-y-s-x-2021-2026-4-pack-pre-programmed-long-life-battery","title":"Richeer Bluetooth TPMS Tire Pressure Sensors for Tesla Model 3\/Y\/S\/X (2021–2026) — 4-Pack, Pre‑Programmed, Long‑Life Battery","description":"\u003cp\u003e\u003cstrong\u003eRicheer 4 PCS Upgraded Bluetooth TPMS Sensor kit provides pre-programmed, real-time tire pressure and temperature monitoring for Tesla Model 3, Model Y, Model S and Model X (2021–2026), with extended-life batteries and simple vehicle activation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep on-road safety insights visible without complicated setup: this set of four Richeer Bluetooth TPMS sensors is designed specifically to communicate with Tesla vehicles from 2021 onward. Each sensor ships pre-programmed to match the OEM signaling for Model 3\/Y (2021–present) and Model S\/X (2022–present), reducing installation steps. Built with an upgraded 2.4GHz Bluetooth chip and a long-lasting battery, the sensors offer reliable readings in extreme temperatures and wet conditions. The package includes OEM cross-reference numbers for easy compatibility checks and a one-year warranty backed by Richeer customer support.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors connect to my Tesla and do they need coding?\u003c\/h3\u003e\n\n\u003cp\u003eThese sensors use an upgraded 2.4GHz Bluetooth chip to transmit pressure and temperature data to your vehicle. They arrive pre-programmed for the supported Tesla models, so no dealer-level coding is required—activation is done through the car’s built-in troubleshooter or tire settings menu.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-programmed for Model 3\/Y (2021–present) and Model S\/X (2022–present)\u003c\/li\u003e\n  \u003cli\u003eActivate via Tesla’s onboard tire pressure troubleshooting\/scan\u003c\/li\u003e\n  \u003cli\u003e2.4GHz Bluetooth ensures stable, low-latency updates\u003c\/li\u003e\n  \u003cli\u003eNo special tools or dealer visit needed for most installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect in extreme weather and how long do batteries last?\u003c\/h3\u003e\n\n\u003cp\u003eRicheer sensors are rated to operate from -40°F to 257°F (-40°C to +125°C), and their power management extends service life. The internal battery is designed to last over eight years under normal driving conditions, helping reduce replacements and maintenance events.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature range supports winter, summer and high-heat environments\u003c\/li\u003e\n  \u003cli\u003eEnergy-efficient design lowers battery drain by about 30%\u003c\/li\u003e\n  \u003cli\u003eLong-life battery—designed for 8+ years of service\u003c\/li\u003e\n  \u003cli\u003eConsistent readings in rain, snow and humid conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these match my vehicle’s OEM TPMS numbers and fit the valve hardware?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit is engineered to match the signaling and fitment used by Tesla for the listed years and includes cross-reference OEM numbers for verification. The sensors are compatible with the valve interfaces found on Model 3\/Y and Model S\/X from their respective model years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM numbers: 1490701-01-B, 1490701-01-C, 1490701-00-B and others\u003c\/li\u003e\n  \u003cli\u003eDesigned for seamless integration with factory tire pressure monitoring\u003c\/li\u003e\n  \u003cli\u003ePhysical valve fitment matches Tesla TPMS mounting standards\u003c\/li\u003e\n  \u003cli\u003eReduces risk of false alerts when properly installed and activated\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and warranty does Richeer provide if a sensor fails?\u003c\/h3\u003e\n\n\u003cp\u003eRicheer includes a one-year warranty and responsive customer service to help diagnose issues or replace defective units. If a sensor stops functioning within the warranty period, contact support for troubleshooting and a timely resolution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty on defects and premature failures\u003c\/li\u003e\n  \u003cli\u003eCustomer support promise with typical responses within 24 hours\u003c\/li\u003e\n  \u003cli\u003eSimple RMA or replacement process if a covered fault is confirmed\u003c\/li\u003e\n  \u003cli\u003eInstallation guidance available from Richeer support team\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers of Tesla Model 3 and Model Y (2021–present) or Model S and Model X (2022–present) who want a direct-fit, pre-programmed TPMS upgrade that minimizes setup, provides consistent readings in harsh climates, and reduces ongoing battery replacements. It’s also a good option for fleet owners and DIY installers who prefer OEM-compatible numbers and a clear warranty process.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors require professional programming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They come pre-programmed for supported Tesla models and activate via the vehicle’s built-in troubleshooter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do the sensor batteries typically last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Batteries are designed for over eight years under normal driving, thanks to energy-efficient components.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Richeer","offers":[{"title":"Default Title","offer_id":67584915013817,"sku":"B0F6BZQBW6","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/richeer-front-packaging-tpms-kit.jpg?v=1790458933"},{"product_id":"vaultsonwheels-under-seat-storage-for-tesla-cybertruck-2024-2026-custom-fit-detachable-3-piece-organizer","title":"VaultsOnWheels Under-Seat Storage for Tesla Cybertruck 2024–2026 — Custom-Fit Detachable 3-Piece Organizer","description":"\u003cp\u003e\u003cstrong\u003eVaultsOnWheels Under Seat Storage Box is a detachable, custom-fit underseat organizer engineered to quietly store tools, emergency gear, and everyday items beneath the 2024–2026 Tesla Cybertruck seats without affecting seat movement.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned specifically for the 2024 and newer Cybertruck interior, this three-piece connected console organizer maximizes usable space under the seats while keeping belongings hidden and secure. Constructed to follow the truck’s contours, the set blends discreet utility with durable, eco-aware materials so you get organized storage that looks integrated rather than aftermarket.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the three-piece connected structure make installation easier?\u003c\/h3\u003e\n\u003cp\u003eThe organizer arrives as two side boxes and a center section that lock together using matching tabs and holes. You simply align the guides and press the pieces into place—no tools required—so assembly is quick and reversible if you want to reposition or detach sections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree interlocking sections for a snug, rattle-free fit\u003c\/li\u003e\n  \u003cli\u003eTool-free assembly with clear tab-and-hole alignment\u003c\/li\u003e\n  \u003cli\u003eSections separate for cleaning, reconfiguration, or selective use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat items can I store and how does it keep them organized?\u003c\/h3\u003e\n\u003cp\u003eThe box is sized to hold roadside tools, first-aid kits, cables, small grocery items, and other essentials while keeping them out of sight. Optional divider boxes let you create smaller compartments to prevent items from sliding and make retrieval faster.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOptional divider inserts for pens, cords, or small tools\u003c\/li\u003e\n  \u003cli\u003eHidden compartments that preserve seat comfort and legroom\u003c\/li\u003e\n  \u003cli\u003eFlat-top profile that does not interfere with seat folding or movement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this underseat organizer affect seat functionality or legroom?\u003c\/h3\u003e\n\u003cp\u003eNo—VaultsOnWheels designed the boxes to follow the Cybertruck’s under-seat geometry so they do not block seat travel or folding. The low-profile exterior fits beneath the seat base and keeps the cabin comfortable for passengers while leaving full seat operation intact.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-profile design maintains passenger legroom\u003c\/li\u003e\n  \u003cli\u003eDoes not impede seat folding or adjustment\u003c\/li\u003e\n  \u003cli\u003eSnap-fit sections stay secured during normal driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and support can I expect from VaultsOnWheels?\u003c\/h3\u003e\n\u003cp\u003eThe storage box uses durable, eco-conscious materials chosen for impact resistance and long-term use in automotive settings. VaultsOnWheels also offers responsive customer service, so if you encounter fit or assembly questions, the team will assist promptly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSturdy, automotive-grade construction for daily use\u003c\/li\u003e\n  \u003cli\u003eEco-aware materials for durability and reduced environmental impact\u003c\/li\u003e\n  \u003cli\u003eDedicated customer support for fitment and warranty questions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The VaultsOnWheels underseat organizer is ideal for Cybertruck owners who want to reclaim cluttered cabin space without compromising seat function—perfect for tradespeople, weekend adventurers, families, and anyone who prefers a clean, hidden storage solution. If you value tailored design, tool-free setup, and the ability to personalize compartments, this organizer is built to match your vehicle and lifestyle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit all 2024–2026 Tesla Cybertruck models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The VaultsOnWheels box is specifically designed to match the 2024 and newer Cybertruck under-seat geometry for a proper fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I remove or reconfigure the compartments?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Absolutely. The three sections detach tool-free and the optional divider boxes allow you to reconfigure storage as needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VaultsOnWheels","offers":[{"title":"Default Title","offer_id":67584927989945,"sku":"B0F9PKWNQV","price":288.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vaultsonwheels-underseat-front-view.jpg?v=1790459443"},{"product_id":"tnirv-wheel-rim-protector-for-tesla-model-y-20-induction-wheels-matte-black-1-piece-abs-pc-cover-snap-on-protection","title":"TNIRV Wheel Rim Protector for Tesla Model Y 20\" Induction Wheels — Matte Black 1‑Piece ABS+PC Cover, Snap‑On Protection","description":"\u003cp\u003e\u003cstrong\u003eTNIRV Wheel Rim Protector is a one-piece matte-black cover engineered to snap onto 2020–2024 Tesla Model Y 20\" Induction wheels to shield edges from scratches, road debris, and wear while restoring a factory-matched look.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis wheel trim ring is molded 1:1 to fit Model Y 20\" Induction wheels and combines an ABS+PC composite shell, upgraded nano double-sided tape, and reinforced buckles for a secure, low-noise attachment. It protects the hub edge from curb rash, covers existing scuffs, and helps keep rims cleaner from sand and grime. The matte finish matches original wheel color to deliver a seamless, sporty appearance without special tools for installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this protector attach to my Model Y and stay secure at highway speeds?\u003c\/h3\u003e\n\u003cp\u003eThe design uses a snap-on bezel and extended buckles tailored to the 20\" Induction wheel profile plus an upgraded nano double-sided tape for a secondary hold. Combined, these parts minimize movement, eliminate rattles, and resist detachment even over bumps or at high speeds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1:1 mold matching the original wheel contour for tight fit.\u003c\/li\u003e\n  \u003cli\u003eReinforced buckle system to lock the cover in place.\u003c\/li\u003e\n  \u003cli\u003eNano double-sided tape provides extra adhesion without residue.\u003c\/li\u003e\n  \u003cli\u003eQuiet operation—engineered to prevent noise from vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this cover actually protect my rims from damage and wear?\u003c\/h3\u003e\n\u003cp\u003eThe protector’s thickened ABS+PC composite shell is built to absorb minor impacts and guard the wheel edge from curb scrapes and road debris. It also conceals existing scratches and slows future abrasion, helping preserve the rim’s appearance over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThicker material resists collisions and reduces visible damage.\u003c\/li\u003e\n  \u003cli\u003eScratch-resistant coating for everyday road conditions.\u003c\/li\u003e\n  \u003cli\u003eBlocks sand, mud and road grime from entering the rim crevice.\u003c\/li\u003e\n  \u003cli\u003eHelps maintain wheel aesthetics and simplifies cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these protectors withstand seasonal extremes and frequent washing?\u003c\/h3\u003e\n\u003cp\u003eThe TNIRV protector is made with a weather-tolerant ABS+PC blend and a durable surface coating designed to resist temperature swings and regular cleaning. It won’t easily crack or peel in hot summers or cold winters and keeps its matte finish after wash cycles when cleaned with gentle products.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh\/low temperature resistance for year-round durability.\u003c\/li\u003e\n  \u003cli\u003eCoated surface resists fading and chipping under normal use.\u003c\/li\u003e\n  \u003cli\u003eCompatible with routine car washes and hand-cleaning methods.\u003c\/li\u003e\n  \u003cli\u003eManufacturing quality aims to exceed common aftermarket covers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: TNIRV’s 20\" rim protector is aimed at Tesla Model Y owners (2020–2024) who have Induction wheels and want to prevent curb damage, hide existing blemishes, or achieve a factory-matched matte-black finish without machining or swapping rims. It’s suitable for daily drivers, city commuters, and anyone seeking an easy, non-invasive cosmetic and protective upgrade. Before purchasing, confirm your vehicle’s wheel size and induction wheel type to ensure a precise fit; installation instructions and recommended prep (including attaching supplied tape) are provided with the product.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit any Tesla Model Y wheel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only fits 2020–2024 Tesla Model Y 20\" Induction wheels. Verify wheel size and style before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require tools or risk damaging my wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools needed; snap-on design and adhesive tape attach without damaging the wheel when installed per instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TNIRV","offers":[{"title":"Default Title","offer_id":67584931168441,"sku":"B0FBZQQTMZ","price":206.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tnirv-front-view-full-wheel.jpg?v=1790459542"},{"product_id":"tnirv-wheel-rim-protector-for-tesla-model-y-21-inch-uberturbine-matte-black-snap-on-impact-resistant-trim-ring","title":"TNIRV Wheel Rim Protector for Tesla Model Y 21-inch Überturbine Matte Black — Snap-On, Impact-Resistant Trim Ring","description":"\u003cp\u003e\u003cstrong\u003eTNIRV Wheel Rim Protector is a one-piece matte-black trim ring engineered to snap onto 2020–2024 Tesla Model Y Performance 21\" Überturbine wheels to prevent curb damage and refresh worn edges.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis protective wheel cover is molded to the exact 1:1 dimensions of Tesla's 21\" Überturbine wheel, combining a sturdy ABS+PC composite construction with an improved buckle system so the protector stays secure at highway speeds and on rough roads. It hides existing scrapes, keeps grime out of the rim, and gives the wheel a seamless, factory-matched matte finish without special tools for installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this rim protector stay attached during long drives?\u003c\/h3\u003e\n\u003cp\u003eThe TNIRV protector uses upgraded extended buckles designed to lock into the wheel flange and resist vibration and wind forces. The snap-on system is quieter and more stable than earlier designs, reducing the chance of loosening on bumpy roads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtended buckle geometry for stronger engagement\u003c\/li\u003e\n  \u003cli\u003eSilent-fit design to eliminate rattling at speed\u003c\/li\u003e\n  \u003cli\u003eTool-free snap-on installation for quick fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it actually prevent scratches and cover existing damage?\u003c\/h3\u003e\n\u003cp\u003eYes—this thicker protector sits over the wheel lip to absorb impacts and shields the hub edge from scuffs and curb rub. It also conceals prior wear while reducing dirt and debris buildup that can accelerate corrosion or staining.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThickened profile for impact resistance\u003c\/li\u003e\n  \u003cli\u003eCovers worn edges to restore a clean look\u003c\/li\u003e\n  \u003cli\u003eBlocks sand, road grit, and grime from entering the rim\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the material suited to seasonal extremes and road salt?\u003c\/h3\u003e\n\u003cp\u003eManufactured from a durable ABS+PC composite with a protective coating, the protector withstands temperature swings and resists scratching and collision damage. The finish remains stable through hot summers and freezing winters without becoming brittle or discolored.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS+PC composite for toughness and flexibility\u003c\/li\u003e\n  \u003cli\u003eScratch-resistant surface treatment\u003c\/li\u003e\n  \u003cli\u003eStable in high heat and subzero conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this change the look of my Model Y?\u003c\/h3\u003e\n\u003cp\u003eThe matte-black trim ring is color-matched to the stock Überturbine finish and designed to be visually seamless, giving the wheel a refreshed, factory-like appearance. Because it’s one-piece with no visible gaps, the protector enhances aesthetics while remaining understated.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatte black finish complements original wheel color\u003c\/li\u003e\n  \u003cli\u003eOne-piece design eliminates offset or visible seams\u003c\/li\u003e\n  \u003cli\u003eImproves overall curb appeal with a discreet upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers of 2020–2024 Tesla Model Y Performance equipped with 21\" Überturbine wheels who want to prevent further curb rash, hide existing rim wear, and maintain a factory-like look with a durable, season-proof protector. Confirm you have the 21\" Überturbine wheel specification before ordering; this product is tailored specifically to that wheel and will not fit other sizes or models. TNIRV supports a lifetime free replacement policy for sizing or manufacturing issues—contact customer service for fast support or a swap.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Tesla Model Y wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only fits 2020–2024 Tesla Model Y Performance with 21\" Überturbine wheels. Confirm wheel size and style before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What if a protector falls off or breaks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: TNIRV offers lifetime free replacement or refund for defects, breakage, or fit issues—contact customer service.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TNIRV","offers":[{"title":"Default Title","offer_id":67584931332281,"sku":"B0FBZLQZLG","price":206.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tnirv-front-packaging-wheel-rim-protector.jpg?v=1790459542"},{"product_id":"focsprod-nacs-to-ccs1-adapter-for-tesla-superchargers-500a-1000v-fast-dc-charging-with-interlock","title":"FOCSPROD NACS to CCS1 Adapter for Tesla Superchargers — 500A 1000V Fast DC Charging with Interlock","description":"\u003cp\u003e\u003cstrong\u003eFOCSPROD NACS to CCS1 Adapter is a UL 2252‑certified DC adapter with an interlock design that lets CCS1 electric vehicles access Tesla Supercharger stations at up to 500A and 1000V for high‑power fast charging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact adapter is engineered to bridge the NACS (Tesla) connector and CCS1 standard, expanding charging choices for compatible non‑Tesla EVs at Tesla Superchargers. Built with heavy‑duty components and a safety interlock, the adapter supports contemporary high‑power V3 and V4 Superchargers. Before buying, confirm your vehicle’s manufacturer has enabled Tesla Supercharger access for CCS1 vehicles and check the list of currently unsupported brands.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast will my EV charge with this adapter?\u003c\/h3\u003e\n\u003cp\u003eCharging speed depends on the Supercharger output, your vehicle’s battery management system, and environmental factors. The adapter supports up to 500 amps and 1000 volts, enabling very rapid DC charging when both the station and vehicle allow those levels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for up to 500A and 1000V for compatible high‑power charging sessions.\u003c\/li\u003e\n  \u003cli\u003eCan add roughly 150 miles of range in about 15 minutes under ideal conditions.\u003c\/li\u003e\n  \u003cli\u003eActual charge rate varies by charger model (V3\/V4), battery state‑of‑charge, and temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and chargers are compatible with this adapter?\u003c\/h3\u003e\n\u003cp\u003eThe adapter is designed for CCS1‑standard vehicles that have manufacturer approval to use Tesla Superchargers. It is suitable for many CCS1 brands like Ford, GM, and Rivian, but several automakers remain incompatible at this time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade for CCS1 EVs to connect to Tesla NACS Superchargers (verify automaker enablement).\u003c\/li\u003e\n  \u003cli\u003eWorks with V3 and V4 Tesla Superchargers that accept CCS1 via the NACS interface.\u003c\/li\u003e\n  \u003cli\u003eCurrently not compatible with Audi, BMW, Mercedes‑Benz, Kia, Mazda, MINI, Nissan, Porsche, Stellantis, Toyota, Volkswagen, and Honda.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety features and certifications does the adapter include?\u003c\/h3\u003e\n\u003cp\u003eSafety is addressed through a robust interlock structure and certification to the UL 2252 standard, meeting recognized electrical and mechanical safety benchmarks for EV charging equipment. The heavy‑duty construction helps maintain a secure connection during high‑current charging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSGS verified to comply with UL 2252 safety requirements.\u003c\/li\u003e\n  \u003cli\u003eInterlock mechanism improves connector stability and reduces accidental disconnects.\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for DC fast charging; not intended for Level 1 or Level 2 AC chargers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use and maintain the adapter?\u003c\/h3\u003e\n\u003cp\u003eThe adapter is intended to be user‑friendly: attach the NACS end to the Tesla Supercharger connector, plug the CCS1 side into your vehicle, and follow on‑screen prompts as required. Routine care includes keeping the connector clean and storing it dry when not in use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple plug‑and‑play operation with clear mechanical interlock engagement.\u003c\/li\u003e\n  \u003cli\u003eAvoid exposure to prolonged moisture and inspect seals periodically.\u003c\/li\u003e\n  \u003cli\u003eFOCSPROD offers a 3‑year warranty and customer support for compatibility questions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The FOCSPROD NACS to CCS1 Adapter is aimed at CCS1 owners who want access to Tesla Supercharging where their automaker permits it — ideal for frequent highway drivers, commuters needing rapid top‑ups, and road‑trip planners seeking more charging options. It is not suitable for vehicles or chargers listed as incompatible, nor is it a replacement for AC Level 1\/2 charging equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this adapter charge at Tesla Superchargers right away?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It works where your vehicle manufacturer has enabled Tesla Supercharger access for CCS1 vehicles; verify with your automaker first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this adapter safe for high‑power charging?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's SGS verified to meet UL 2252 standards and includes an interlock for a secure connection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FOCSPROD","offers":[{"title":"Default Title","offer_id":67584935985337,"sku":"B0FKMM4PYP","price":284.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/focsprod-front-view-adapter.jpg?v=1790459771"},{"product_id":"lectron-ccs-to-nacs-adapter-for-tesla-model-s-3-x-y-500a-1-000v-ul-2252-certified-black","title":"Lectron CCS to NACS Adapter for Tesla Model S\/3\/X\/Y — 500A, 1,000V UL 2252 Certified (Black)","description":"\u003cp\u003e\u003cstrong\u003ePlug a Tesla Model S\/3\/X\/Y or other NACS-equipped EV into CCS1 fast chargers across North America using the Lectron CCS to NACS adapter, rated for up to 500A and 1,000V with UL 2252 safety certification.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, rugged adapter expands charging options by converting a NACS (Tesla) inlet to accept CCS1 DC fast-charging plugs. Designed for high-power sessions, the adapter provides compatibility where vehicles and stations support CCS DC charging. It includes thermal protection and is engineered to withstand harsh environments, giving drivers more flexibility on longer trips or when CCS stations are the most convenient option.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter let my Tesla charge at CCS1 stations?\u003c\/h3\u003e\n\n\u003cp\u003eThe adapter converts the vehicle-facing NACS connection to a CCS1-compatible interface so CCS1 chargers can communicate and deliver DC power when your Tesla reports CCS adapter support as enabled. Charging speed depends on station capability and vehicle acceptance of current and voltage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConnects NACS-equipped vehicles to CCS1 station plugs.\u003c\/li\u003e\n  \u003cli\u003eSupports up to 500A and 1,000V for theoretical peak rates to 500 kW.\u003c\/li\u003e\n  \u003cli\u003eRequires vehicle\/software confirmation that CCS adapter support is enabled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this adapter safe and reliable for fast charging?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the adapter is UL 2252 certified and includes built-in thermal protection and an automatic over-temperature shutoff to reduce risk during high-power use. It’s been tested for high-power cycles, impact, crush, and a wide temperature range to maintain performance in variable conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUL 2252 electrical safety certification.\u003c\/li\u003e\n  \u003cli\u003eThermal monitoring with automatic shutoff for overheating protection.\u003c\/li\u003e\n  \u003cli\u003eIP67-rated housing for dust and water resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles will work with this Lectron adapter?\u003c\/h3\u003e\n\n\u003cp\u003eDesigned for Tesla Model S, 3, X and Y that show CCS adapter support enabled in vehicle settings, and for next-generation NACS-equipped EVs that adopt the NACS inlet standard. It is not compatible with the Cybertruck; always confirm compatibility in your vehicle’s documentation before use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTesla Model S\/3\/X\/Y with CCS adapter support enabled.\u003c\/li\u003e\n  \u003cli\u003ePlanned NACS EVs from multiple manufacturers (check owner materials).\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Cybertruck.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat environmental and usage limits should I know?\u003c\/h3\u003e\n\n\u003cp\u003eThe adapter is built to operate across a broad temperature range and to survive physical stresses typical of public charging environments. However, charging behavior and maximum rates depend on the charger, the vehicle’s battery management, and ambient conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOperational range tested from −22 °F to 122 °F.\u003c\/li\u003e\n  \u003cli\u003eImpact and crush testing plus high-power cycle validation.\u003c\/li\u003e\n  \u003cli\u003eIP67-rated against dust and temporary water immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who own a Tesla Model S, 3, X or Y that reports CCS adapter support enabled, or owners of NACS-equipped EVs who want access to the 12,000+ CCS1 fast chargers across North America. It’s ideal for frequent long-distance travelers, fleet operators, or anyone who encounters CCS-only fast chargers and needs a certified, high-power adapter that prioritizes safety and durability. Not suitable for Cybertruck owners; always verify your vehicle’s CCS DC charging capability and follow the included User Manual for operating instructions and safety guidance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter work with Cybertruck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The Lectron adapter is not compatible with the Cybertruck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need anything else to use CCS fast chargers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Your vehicle must support CCS DC charging (check Software \u0026gt; Additional Vehicle Info). Also follow the included User Manual for safe operation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lectron","offers":[{"title":"Default Title","offer_id":67584936607929,"sku":"B0FPQQL6FP","price":417.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lectron-adapter-front-view_fb4c69f5-1216-4e3b-8522-df156160082c.jpg?v=1790459816"},{"product_id":"lectron-ccs-to-tesla-adapter-nacs-dc-fast-charger-black-500a-500v-compact-portable","title":"Lectron CCS to Tesla Adapter — NACS DC Fast Charger (Black), 500A\/500V, Compact Portable","description":"\u003cp\u003e\u003cstrong\u003eThe Lectron CCS to Tesla adapter converts CCS1 DC fast chargers into an instant high-power option for CCS-enabled Tesla and NACS EVs (DC fast charging only).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you drive a Tesla that supports CCS or a NACS-equipped EV, this compact Lectron adapter opens access to thousands of CCS stations across North America so you can fast-charge away from Tesla-only stalls. Built for high-current use, the adapter is engineered to work with CCS1 plugs and Tesla NACS inlets, supplying up to the adapter's rated limits while monitoring internal temperature to protect both the connector and vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast will my car charge with this adapter?\u003c\/h3\u003e\n\u003cp\u003eCharging speed depends on the charging station, the vehicle’s battery state, and the adapter’s maximum ratings. The Lectron adapter supports up to 500A at 500V, enabling very high DC charging power when the station and vehicle permit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePeak adapter rating: 500A \/ 500V (DC)\u003c\/li\u003e\n  \u003cli\u003eSupports high-power CCS stations—real-world power may be limited by station output or vehicle acceptance\u003c\/li\u003e\n  \u003cli\u003eWorks with chargers that deliver up to the adapter’s rated current; expect variable kW depending on voltage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill my Tesla model work with this CCS to NACS adapter?\u003c\/h3\u003e\n\u003cp\u003eThe adapter is compatible with Tesla vehicles that are CCS-enabled or have the NACS inlet. Some older Tesla models may require a firmware or ECU retrofit to accept CCS; always confirm vehicle settings before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with all Tesla models that support CCS\/NACS charging\u003c\/li\u003e\n  \u003cli\u003eTeslas built before October 2020 might need an ECU update or retrofit\u003c\/li\u003e\n  \u003cli\u003eVehicles produced before 2014 are not supported for CCS compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and durability features does it include?\u003c\/h3\u003e\n\u003cp\u003eLectron designed the adapter for heavy-duty DC use with built-in temperature monitoring and robust operating tolerances. The adapter reduces current if internal temperatures climb and will cut off if temperatures exceed a safe threshold to prevent damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time internal temperature monitoring with automatic current reduction at high temperatures\u003c\/li\u003e\n  \u003cli\u003eAutomatic cutoff if internal temperature reaches critical level, resuming when safe\u003c\/li\u003e\n  \u003cli\u003eRated to operate between -22°F and 122°F for varied climates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to use and carry day-to-day?\u003c\/h3\u003e\n\u003cp\u003eThis adapter was developed for practical portability and simple operation: lightweight, compact, and shaped to store in a glove compartment. Using it is a matter of plugging onto a CCS1 charger and inserting the NACS end into your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play use—attach to a CCS1 charger, then connect to your Tesla’s NACS inlet\u003c\/li\u003e\n  \u003cli\u003eCompact form factor designed for convenient storage in glove box or trunk\u003c\/li\u003e\n  \u003cli\u003eBlack finish and sturdy housing for regular handling and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Lectron CCS to Tesla adapter suits Tesla and NACS EV owners who want access to North America’s extensive CCS DC fast-charging network without relying solely on Tesla Superchargers. It’s ideal for frequent long-distance travelers, drivers who need flexible charging options on road trips, and EV owners with models already enabled for CCS. Note: this product is for DC fast charging only and is not compatible with the Tesla Cybertruck. Lectron backs the adapter with a one-year warranty and customer support if you need assistance with setup or troubleshooting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this adapter with Cybertruck?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The Lectron CCS to Tesla adapter is not compatible with the Cybertruck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the adapter support AC charging?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This product is for DC fast charging only and cannot be used for AC charging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lectron","offers":[{"title":"Default Title","offer_id":67584936771769,"sku":"B0DHK9YM3V","price":275.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lectron-adapter-front-view.jpg?v=1790459813"},{"product_id":"3d-maxpider-kagu-cargo-liner-for-tesla-model-y-5-seat-2020-2026-custom-fit-waterproof-odorless","title":"3D MAXpider Kagu Cargo Liner for Tesla Model Y 5-Seat (2020–2026) — Custom-Fit Waterproof, Odorless","description":"\u003cp\u003e\u003cstrong\u003e3D MAXpider Kagu Cargo Liner custom-fits the Tesla Model Y 5-seat (2020–2026) to protect the cargo area from dirt, spills, snow, and wear while remaining odorless and easy to clean.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned specifically for the dimensions of the Tesla Model Y 5-seat cargo bay, this Kagu series liner delivers edge-to-edge coverage with raised sides to trap debris and moisture. Built from a layered hybrid material, the liner balances a refined finish with durable, waterproof performance and a textured anti-slip base. It’s an engineered aftermarket solution to maintain resale value and keep the cargo area tidy without the heavy smell of traditional rubber.\u003c\/p\u003e\n\n\u003ch3\u003eWill this cargo liner actually fit my Tesla Model Y 5-seat (2020–2026)?\u003c\/h3\u003e\n\u003cp\u003eYes—the liner is produced using high-precision laser scanning to match the cargo bay contours of the specified Model Y years and seating configuration. That precision gives fuller coverage than generic mats and ensures the raised perimeter aligns with the vehicle’s interior edges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom-made to Tesla Model Y 5-seat dimensions (2020–2026)\u003c\/li\u003e\n  \u003cli\u003eRaised sidewalls lock in spills and grime\u003c\/li\u003e\n  \u003cli\u003eEdge-to-edge coverage reduces carpet exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Kagu material perform in bad weather and heavy use?\u003c\/h3\u003e\n\u003cp\u003eThe Kagu liner is a multi-layer hybrid composite engineered for all-season use: a waterproof thermoplastic surface, energy-absorbing XPE foam center, and patented anti-skid backing. Together these layers block water, salt, and mud while damping vibration and keeping the liner securely in place during loading and driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWaterproof top layer resists stains and dampness\u003c\/li\u003e\n  \u003cli\u003eXPE foam core reduces road noise and cushions cargo\u003c\/li\u003e\n  \u003cli\u003eAnti-skid backing holds the liner steady on the cargo floor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the liner safe, easy to clean, and will it smell like rubber?\u003c\/h3\u003e\n\u003cp\u003eThis product is made from SGS-certified, environment-friendly materials and is marketed as 100% odorless and non-toxic. Cleaning is simple: lift the liner out, hose or wipe it down, then reinstall—no harsh chemicals or special tools required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSGS-certified odorless materials—no lingering rubber smell\u003c\/li\u003e\n  \u003cli\u003eQuick maintenance: hose off, wipe, or spot clean\u003c\/li\u003e\n  \u003cli\u003eStain-resistant surface preserves appearance over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits will I notice day-to-day?\u003c\/h3\u003e\n\u003cp\u003eThe liner protects the cargo carpet from routine wear—groceries, pet gear, sports equipment—while making loading and unloading less messy. Its sleek surface also gives the cargo area a cleaner look than rough rubber alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents stains from spills, salt, and tracked-in dirt\u003c\/li\u003e\n  \u003cli\u003eLightweight for easy removal and handling\u003c\/li\u003e\n  \u003cli\u003eMaintains a refined interior finish without heavy odor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Tesla Model Y owners (5-seat, 2020–2026) who want a precise, durable cargo protection solution that balances refined appearance with all-weather utility. It’s especially useful for drivers who carry gear, pets, or wet items regularly and those who want a hassle-free cleaning routine without sacrificing fit or finish.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this liner fit all Model Y trims and years?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s tailored for Tesla Model Y 5-seat models from 2020 through 2026; other trims or seating layouts may not match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I clean the 3D MAXpider Kagu cargo liner?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Remove the liner, then hose it off or wipe with a damp cloth; allow to dry before reinstalling.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"3D MAXpider","offers":[{"title":"Default Title","offer_id":67584940376249,"sku":"B08F7CFR3N","price":254.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/3d-maxpider-kagu-cargo-liner-front-view.jpg?v=1790460054"},{"product_id":"lectron-nexus-tesla-nacs-level-2-ev-charger-40a-240v-nema-14-50-plug-in-23ft-cable-ip66-weatherproof","title":"Lectron NEXUS Tesla NACS Level 2 EV Charger 40A 240V NEMA 14-50 Plug-in — 23ft Cable \u0026 IP66 Weatherproof","description":"\u003cp\u003e\u003cstrong\u003eThe Lectron NEXUS Tesla NACS Level 2 charger is a plug-in 40A 240V home charging station with a 23-foot cable and UL\/ETL safety certifications built for Tesla and NACS-equipped EVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you drive a Tesla Model S\/3\/X\/Y or a newer NACS-enabled EV, this Lectron charging station delivers fast, dependable home charging without hardwiring. It connects to a standard NEMA 14-50 outlet, provides robust safety testing, and comes with a long cable and mounting holster to keep your garage tidy. The unit is weatherproof for outdoor use and backed by a three-year limited warranty.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this charger restore my driving range?\u003c\/h3\u003e\n\u003cp\u003eThe Lectron NEXUS supplies up to 40 amps at 240 volts (about 9.6 kW), which translates to as much as 38 miles of range per hour depending on your vehicle and driving conditions. That speed makes overnight top-ups and shorter daytime fills much more practical than a Level 1 portable charger.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMax output: 40 A \/ 240 V (9.6 kW)\u003c\/li\u003e\n  \u003cli\u003eEstimated rate: up to ~38 miles of range per hour\u003c\/li\u003e\n  \u003cli\u003eIdeal for full recharge during typical overnight parking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with my Tesla or other NACS vehicles?\u003c\/h3\u003e\n\u003cp\u003eThe charger uses the SAE J3400 NACS connector, so it plugs directly into all Tesla models and newer EVs that adopt the NACS standard without adapters. It’s forward-looking compatibility for next-gen models that ship with native NACS ports.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNative NACS (J3400) connector for Tesla Model S\/3\/X\/Y and Cybertruck\u003c\/li\u003e\n  \u003cli\u003eCompatible with upcoming NACS-equipped EVs from other manufacturers\u003c\/li\u003e\n  \u003cli\u003eNo adapter needed for NACS-native vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need an electrician or special wiring to install it?\u003c\/h3\u003e\n\u003cp\u003eNo permanent hardwiring is required: the Lectron NEXUS is designed to plug into a standard 240V NEMA 14-50 outlet. That makes setup faster and more flexible — simply install or use an existing NEMA 14-50 receptacle to begin regular Level 2 charging.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play design for NEMA 14-50 outlets\u003c\/li\u003e\n  \u003cli\u003eWorks without professional hardwiring (verify local code and outlet rating)\u003c\/li\u003e\n  \u003cli\u003ePortable enough to move between locations with a compatible outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and safe is the charger for outdoor use?\u003c\/h3\u003e\n\u003cp\u003eThe unit is built to withstand harsh conditions with an IP66 ingress rating and multiple UL safety certifications, ensuring protection from dust, heavy rain, and common electrical faults. It also features built-in safeguards against overheating, overcurrent, and ground faults for steady operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP66 weatherproof enclosure for outdoor use\u003c\/li\u003e\n  \u003cli\u003eUL 2594, UL 2231, UL 2251 and UL 817 tested and ETL listed\u003c\/li\u003e\n  \u003cli\u003eOverheat, overcurrent, voltage and ground fault protections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: The Lectron NEXUS is aimed at EV drivers who want faster home charging without electrical rework — especially Tesla owners and drivers of next-gen NACS-equipped vehicles. It suits homeowners with a NEMA 14-50 outlet, renters who need a non-permanent solution, and anyone seeking a weatherproof, safety-certified Level 2 charger with a long cable and simple mounting options.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install the Lectron NEXUS myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it plugs into a standard NEMA 14-50 outlet so no hardwiring is required; confirm outlet capacity and local codes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the charger safe for outdoor use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — IP66 weatherproofing plus multiple UL\/ETL certifications provide protection from dust, rain, and electrical faults.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lectron","offers":[{"title":"Default Title","offer_id":67584942342329,"sku":"B0GVSF1JVN","price":955.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lectron-nexus-front-panel.jpg?v=1790460202"},{"product_id":"aimiler-level-2-ev-charger-for-tesla-nacs-cars-32a-adjustable-25ft-cable-wi-fi-app-control","title":"AIMILER Level 2 EV Charger for Tesla \u0026 NACS Cars — 32A Adjustable, 25ft Cable, Wi‑Fi App Control","description":"\u003cp\u003e\u003cstrong\u003eAIMILER Level 2 Tesla Charger is a portable, ETL‑listed 240V EVSE with a NACS connector, 25 ft cable, adjustable 16–32A output, and Wi‑Fi app control for safe, faster home charging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, plug‑in charger converts a standard NEMA 14‑50 outlet into a reliable Level 2 charging station for Tesla and NACS‑equipped EVs. It supports up to 7.68 kW (32A on a 40A circuit) and includes on‑unit controls plus a smartphone app for scheduled charging, current adjustment, and usage history. Built with weather‑resistant housing and a long, reinforced cable, the unit is designed for everyday home use, portable convenience, and straightforward setup without extra GFCI devices.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast will this AIMILER charger replenish my EV battery?\u003c\/h3\u003e\n\u003cp\u003eThe charger delivers up to 7.68 kW at 32A when paired with a properly rated 40A circuit, which is significantly quicker than standard Level 1 charging. You can dial the amperage down to match 30A or 20A circuits, and monitor actual charging power on the display or in the app.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMax output: 32A on a 40A breaker (up to 7.68 kW).\u003c\/li\u003e\n  \u003cli\u003e30A circuit: limited to 24A output.\u003c\/li\u003e\n  \u003cli\u003e20A circuit: limited to 16A output; suitable for temporary Level 1 use.\u003c\/li\u003e\n  \u003cli\u003eAdjustable from 16A–32A directly on the unit or via the app.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this charger work with my Tesla or other NACS cars?\u003c\/h3\u003e\n\u003cp\u003eThe AIMILER unit uses a NACS plug compatible with Tesla models and many NACS‑standard EVs. For vehicles using J1772 inlets you will need a Tesla‑to‑J1772 adapter (sold separately); the charger itself does not include a J1772 connector.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for Tesla Model S\/X\/3\/Y and other NACS EVs.\u003c\/li\u003e\n  \u003cli\u003eRequires Tesla→J1772 adapter for J1772 vehicles.\u003c\/li\u003e\n  \u003cli\u003eIncludes NEMA 14‑50P plug for installation into 240V sockets.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with RV adapter cables—use the correct EV adapter if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat smart features and safety measures are built in?\u003c\/h3\u003e\n\u003cp\u003eThe charger connects to your home Wi‑Fi for app control, scheduling, and charging history, and displays real‑time amperage, voltage, and delay timers on its touch screen. Safety certifications and built‑in leakage protection reduce the need for an external GFCI device, while firmware and factory reset options make network setup and troubleshooting straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWi‑Fi app: start\/stop charging, set off‑peak schedules, view costs and history.\u003c\/li\u003e\n  \u003cli\u003eOn‑device screen with touch buttons for amperage and timer adjustments.\u003c\/li\u003e\n  \u003cli\u003eETL listed and meets multiple UL safety standards; CCID‑20 anti‑leakage protection built in.\u003c\/li\u003e\n  \u003cli\u003eFactory reset and Wi‑Fi reset procedures for easy reconnection (use 2.4 GHz network initially).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and portable is the AIMILER EVSE for home use?\u003c\/h3\u003e\n\u003cp\u003eThe unit is designed for regular home installation and portable carry between locations. A 25‑foot armored cable resists wear and the housing meets NEMA Type 4 criteria for weather resistance, suitable for covered outdoor or garage mounting when not in direct harsh sunlight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e25 ft military‑grade cable rated for extensive flexing and thousands of cycles.\u003c\/li\u003e\n  \u003cli\u003eNEMA Type 4 protection degree for splash and dust resistance (avoid prolonged direct sun exposure).\u003c\/li\u003e\n  \u003cli\u003eCompact, plug‑in design—no hard‑wired electrician work required if you already have a NEMA 14‑50 outlet.\u003c\/li\u003e\n  \u003cli\u003eLightweight enough to move between home, garage, and travel locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The AIMILER Level 2 NACS charger suits Tesla and other NACS‑compatible EV owners who want faster home charging without a permanently installed station. It's also ideal for drivers who need a portable, app‑controlled EVSE with adjustable amperage, built‑in safety protections, and a long, durable cable. Choose this unit if you have—or plan to install—a 240V NEMA 14‑50 outlet and want a reliable, full‑featured charging solution for daily use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an electrician to use this AIMILER charger?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If you already have a NEMA 14‑50 socket, no electrician is required; otherwise hire a qualified electrician to install the 240V outlet safely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I connect the charger to 2.4 GHz Wi‑Fi only?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—initial setup requires a 2.4 GHz Wi‑Fi network; avoid 5 GHz during the first connection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AIMILER","offers":[{"title":"Default Title","offer_id":67584964591801,"sku":"B0BWRXBDY3","price":457.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/aimiler-front-panel-nacs-charger.jpg?v=1790461243"},{"product_id":"kalofor-tesla-model-y-21-uberturbine-wheel-rim-protectors-gunpowder-matte-4-piece-set-with-foam-tape","title":"KALOFOR Tesla Model Y 21\" Uberturbine Wheel Rim Protectors - Gunpowder matte, 4-piece set with foam tape","description":"\u003cp\u003e\u003cstrong\u003eKALOFOR rim protectors are snap-on trim rings designed to shield Tesla Model Y 21-inch Uberturbine wheels from curb rash and everyday scuffs while preserving the wheel's original look.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Gunpowder-finished wheel rim protectors are made specifically for the Tesla Model Y 21\" Uberturbine wheels, offering a balance of protection and style. Each kit includes four precisely shaped rim covers and foam tape for a secure attachment; the rear of each protector features shock-filtering cotton to reduce vibration and help keep the cover seated. Before buying, watch the provided installation video to ensure correct fitment and a smooth installation process.\u003c\/p\u003e\n\n\u003ch3\u003eHow do KALOFOR rim protectors attach to Uberturbine wheels?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is tool-free and designed for a tight, stable fit against the Uberturbine wheel lip. The covers press into place and are supported by foam tape and a soft backing that absorbs minor impacts and reduces rattling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePress-fit design tailored to the Model Y 21\" Uberturbine profile.\u003c\/li\u003e\n  \u003cli\u003eIncludes foam tape for added adhesion and stability.\u003c\/li\u003e\n  \u003cli\u003eSoft shock-filtering material on the back cushions the wheel edge.\u003c\/li\u003e\n  \u003cli\u003eRemovable for cleaning or replacement without special tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these protectors prevent curb rash and visible scratches?\u003c\/h3\u003e\n\n\u003cp\u003eThe protectors are intended to shield the wheel lip from common curb scrapes and roadside contacts, reducing visible damage to the original Uberturbine finish. They provide a sacrificial barrier that takes the impact instead of the wheel edge, though they do not make the wheels invulnerable to heavy collisions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGuards the rim edge against light to moderate scrapes.\u003c\/li\u003e\n  \u003cli\u003eMaintains the wheel's factory styling with a Gunpowder color.\u003c\/li\u003e\n  \u003cli\u003eReplaces scratched trim easily if it becomes damaged.\u003c\/li\u003e\n  \u003cli\u003eHelps preserve resale value by minimizing visible wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the Gunpowder finish and design add to my Model Y?\u003c\/h3\u003e\n\n\u003cp\u003eThe matte Gunpowder paint offers a subtle, high-end look that complements the Uberturbine wheel design without overpowering the car's aesthetics. The protectors follow the wheel's original contours to keep the Tesla's factory appearance intact while giving a slightly more rugged visual protection.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatte Gunpowder paint for a refined, low-gloss appearance.\u003c\/li\u003e\n  \u003cli\u003eShape and profile matched to Uberturbine spokes and lip.\u003c\/li\u003e\n  \u003cli\u003eColor blends with dark wheel tones and contrasts lighter finishes.\u003c\/li\u003e\n  \u003cli\u003eAdds a finished protective edge without changing wheel geometry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and maintainable are these rim protectors?\u003c\/h3\u003e\n\n\u003cp\u003eKALOFOR rim protectors are built for everyday use: they resist scuffs and can be removed for cleaning or replacement. The foam-tape attachment and inner cushioning enhance long-term fit, but periodic checks are recommended to confirm adhesion after road use or washing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDurable painted surface resists routine wear.\u003c\/li\u003e\n  \u003cli\u003eShock-filtering cotton reduces stress on the wheel lip.\u003c\/li\u003e\n  \u003cli\u003eRemovable design allows for cleaning and inspection.\u003c\/li\u003e\n  \u003cli\u003eReplaceable if severely damaged after impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: KALOFOR rim protectors are for Tesla Model Y owners who have 21\" Uberturbine wheels and want to reduce curb damage while keeping a factory-style look. They suit drivers who park in tight city spaces, frequently navigate curbs, or simply prefer an added layer of defense for their wheels without permanent modification. If you value appearance and practical protection combined with easy installation, this four-piece Gunpowder set is a targeted accessory for preserving your Model Y's wheels.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these rim protectors compatible with all Tesla Model Y wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are made specifically for the 21\" Uberturbine wheels; they may not fit other Model Y wheel designs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I remove the protectors for wheel cleaning?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are removable and reusable; check and reapply foam tape if adhesion weakens.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KALOFOR","offers":[{"title":"Default Title","offer_id":67584969998521,"sku":"B0D97W9PYM","price":179.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/kalofor-front-packaging-model-y-uberturbine-gunpowder.jpg?v=1790461418"},{"product_id":"siglin-wheel-covers-for-tesla-model-y-19-inch-matte-black-uberturbine-rim-protectors-4-piece-abs-snap-on","title":"SIGLIN Wheel Covers for Tesla Model Y 19-inch Matte Black Überturbine Rim Protectors 4-Piece ABS Snap-On","description":"\u003cp\u003e\u003cstrong\u003eSIGLIN 19-inch wheel covers are snap-on rim protectors engineered to fit original Tesla Model Y 2021–2024 19\" wheels, combining a matt-black Überturbine look with curb-guard functionality.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese four-piece hub caps are molded to the factory 1:1 opening of Model Y 19\" wheels so they sit flush and cover the rim edge. Made from ABS plastic and finished in matte black with 14 spokes, they recreate the Gemini\/Überturbine style while protecting the alloy from scuffs and roadside marks. The set includes adhesive tape for a firmer fit and is not compatible with modified wheels or the 2026 Juniper Model Y variant.\u003c\/p\u003e\n\n\u003ch3\u003eWill these wheel covers fit my Tesla Model Y 19-inch wheels?\u003c\/h3\u003e\n\n\u003cp\u003eYes, the SIGLIN covers are designed to match the original factory 19\" Model Y wheel opening for 2021 through 2024. They are sized to clip into the factory rim and provide full coverage of the exposed wheel lip.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2021, 2022, 2023, 2024 Tesla Model Y with original 19\" wheels.\u003c\/li\u003e\n  \u003cli\u003eDesigned to the car’s 1:1 mold for secure alignment and fitment.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with modified aftermarket wheels or the 2026 Juniper Model Y.\u003c\/li\u003e\n  \u003cli\u003eFit only standard 19-inch factory rims, not larger or smaller diameters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are the SIGLIN ABS wheel covers and how do they protect rims?\u003c\/h3\u003e\n\n\u003cp\u003eThe covers are molded from ABS, a rigid plastic known for impact resistance and weather durability. They shield the rim edge from curb scrapes, parking lot knocks, and everyday wear that can otherwise lead to costly wheel repairs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eABS construction resists cracks and fading under normal road conditions.\u003c\/li\u003e\n  \u003cli\u003eFull-coverage design protects the rim lip and visible barrel sections.\u003c\/li\u003e\n  \u003cli\u003eMatte finish hides minor scratches and reduces glare for a cleaner look.\u003c\/li\u003e\n  \u003cli\u003eHelps avoid replacement costs by preventing curb rash and edge damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the SIGLIN Model Y hub caps and secure them?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is a simple snap-on process that takes minutes per wheel. Position the cover over the wheel, press evenly until clips engage, and apply the supplied adhesive tape around the hub cap for extra retention.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNo special tools required—just hand pressure to snap into place.\u003c\/li\u003e\n  \u003cli\u003eIncluded adhesive tape increases holding strength and reduces vibration.\u003c\/li\u003e\n  \u003cli\u003eCheck clip engagement by lightly tugging after installation.\u003c\/li\u003e\n  \u003cli\u003eRemoveable for cleaning or wheel maintenance without permanent modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat visual effect will these covers have on my Model Y’s appearance?\u003c\/h3\u003e\n\n\u003cp\u003eThe matt-black Überturbine 14-spoke design refreshes the vehicle’s styling with a sportier, more refined look while preserving the Tesla aesthetic. They serve as both a cosmetic upgrade and practical cover for aging or scratched rims.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e14-spoke Überturbine pattern mimics popular Gemini wheel styling.\u003c\/li\u003e\n  \u003cli\u003eMatte black finish provides a low-gloss, modern appearance.\u003c\/li\u003e\n  \u003cli\u003eCovers can mask existing curb marks while preventing new ones.\u003c\/li\u003e\n  \u003cli\u003eInstant visual upgrade without replacing wheels or rims.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? These SIGLIN wheel covers are ideal for Tesla Model Y owners who want an affordable way to refresh their vehicle’s look and protect factory 19\" rims from everyday damage. Choose this set if you have unmodified 19-inch Model Y wheels from 2021–2024 and want a durable, easy-to-install hub cap that balances style and function. Do not purchase for modified wheels or the 2026 Juniper Model Y.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these wheel covers compatible with Model Y 2025 or 2026?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Tesla Model Y 2021–2024 factory 19\" wheels only; they are not compatible with the 2026 Juniper Model Y.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I remove the covers for tire service?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The SIGLIN covers snap on and can be removed by hand for cleaning or wheel maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SIGLIN","offers":[{"title":"Default Title","offer_id":67584980189369,"sku":"B0CFDB4DH2","price":417.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/siglin-front-on-car-model-y-wheel-cover.jpg?v=1790461959"},{"product_id":"rayluxe-tesla-model-y-20-induction-wheel-rim-protectors-matte-black-abs-snap-on-set-of-4","title":"RAYLUXE Tesla Model Y 20\" Induction Wheel Rim Protectors — Matte Black ABS, Snap-On Set of 4","description":"\u003cp\u003e\u003cstrong\u003eRAYLUXE rim protectors are snap-on ABS wheel covers designed to shield Tesla Model Y 20\" Induction wheels (2020–2024) from curb rash and everyday road damage while adding a matte-black, factory-style finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you drive a Tesla Model Y equipped with the 20\" Induction wheels from model years 2020 through 2024, these RAYLUXE covers deliver full-ring protection without altering wheel balance or requiring adhesives. Molded from upgraded ABS, the rings clip into the factory rim profile and create a barrier against scuffs from curbs, parking lot hazards, and small road debris. They’re lightweight, weather-resistant, and made to blend seamlessly with the original wheel shape for a subtle aesthetic upgrade.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these protect my Induction wheels during city parking?\u003c\/h3\u003e\n\u003cp\u003eThe RAYLUXE covers wrap the outer lip of the 20\" Induction wheel, intercepting impacts that would normally nick or scrape the painted surface. Because they install over the factory edge, they take the abrasion instead of your original finish. They are easy to replace if damaged, keeping repair costs down compared with repainting or refinishing rims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-lip coverage shields the wheel edge from curb contact\u003c\/li\u003e\n  \u003cli\u003eSnap-on clips absorb scrapes and prevent paint loss\u003c\/li\u003e\n  \u003cli\u003eReplaceable and inexpensive versus full wheel repair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my Model Y rims and how do I install them?\u003c\/h3\u003e\n\u003cp\u003eThese protectors are produced from a precise 1:1 mold matched to Tesla’s original 20\" Induction wheel dimensions for Model Y years 2020–2024. Installation is a no-tools, DIY process: apply the included foam strip, align with the valve stem, and press each clip into place until the ring sits flush with the rim. Always confirm rim size stamped on your tire sidewall and review the installation video before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: Model Y 20\" Induction wheels only (2020–2024)\u003c\/li\u003e\n  \u003cli\u003eNo drilling, adhesives, or wheel removal required\u003c\/li\u003e\n  \u003cli\u003eInstallation takes minutes per wheel with the supplied foam strip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat material are the covers made from and how do they hold up?\u003c\/h3\u003e\n\u003cp\u003eEach cover is made from upgraded ABS plastic chosen for strength and resilience. ABS offers impact resistance, UV stability, and temperature tolerance so the covers keep their shape and matte finish across seasons. The material is non-toxic and odorless, and resists common road contaminants such as salt and grime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable ABS resists cracking and discoloration\u003c\/li\u003e\n  \u003cli\u003eUV-stable matte finish maintains appearance over time\u003c\/li\u003e\n  \u003cli\u003eLightweight construction avoids added stress on wheel bearings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these change the look of my Model Y?\u003c\/h3\u003e\n\u003cp\u003eThe matte-black design is intended to integrate with the Induction wheel’s original styling, delivering a subtle, cohesive appearance rather than a flashy aftermarket look. The streamlined profile hides the seam between protector and wheel while adding a slightly more aggressive, refined edge around the rim. For owners who prefer understated upgrades, these covers preserve Tesla’s aesthetic while protecting value.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatte black finish complements factory wheel tones\u003c\/li\u003e\n  \u003cli\u003eTrim-matched profile minimizes visual disruption\u003c\/li\u003e\n  \u003cli\u003eAdds a cleaner, protected wheel edge for long-term resale value\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: RAYLUXE rim protectors are ideal for Model Y owners (2020–2024) who want to preserve factory wheels from curb rash, lower maintenance costs, and keep a factory-like appearance without professional installation. They’re especially useful for city drivers, new drivers, rental vehicles, or anyone frequently navigating tight parking spaces who wants a simple, reversible safeguard for their 20\" Induction wheels.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fit the 2025 Model Y Induction wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These RAYLUXE protectors fit only Tesla Model Y 20\" Induction wheels from 2020–2024 and are not compatible with the 2025 Juniper update.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install them myself without tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Installation is snap-on with an included foam strip; no tools or wheel removal required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"RAYLUXE","offers":[{"title":"Default Title","offer_id":67584990544057,"sku":"B0DH2K4F5N","price":186.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rayluxe-front-packaging-model-y-20-inch.jpg?v=1790462458"},{"product_id":"rayluxe-tesla-model-y-21-uberturbine-rim-protectors-matte-black-abs-set-of-4-snap-on-curb-guards","title":"RAYLUXE Tesla Model Y 21\" Überturbine Rim Protectors — Matte Black ABS, Set of 4, Snap-On Curb Guards","description":"\u003cp\u003e\u003cstrong\u003eRAYLUXE 21\" rim protectors are snap-on ABS trim rings that shield Tesla Model Y Überturbine wheels (2020–2024) from curb scrapes while adding a matte-black finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese custom-fit hubcap guards are molded from the original Tesla wheel dimensions to deliver a clean, factory-like appearance and protective barrier. Made from upgraded ABS, the rings resist UV, heat, and road debris; installation is a straightforward DIY snap-on with no tools required. They are sold as a set of four and are sized specifically for Model Y Überturbine 21\" wheels manufactured between 2020 and 2024.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these protect my Überturbine wheels from curb damage?\u003c\/h3\u003e\n\n\u003cp\u003eThe RAYLUXE rings sit over the wheel lip to absorb scuffs and impacts that would otherwise reach the alloy. By taking the brunt of minor scrapes, they reduce visible curb rash and help preserve wheel finish and resale value.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFull-coverage 21\" ring matches the OEM wheel profile precisely\u003c\/li\u003e\n  \u003cli\u003eABS material disperses light impacts and resists road chips\u003c\/li\u003e\n  \u003cli\u003eSnap-fit clips prevent gaps where debris can collect\u003c\/li\u003e\n  \u003cli\u003eMatte-black surface conceals everyday wear and aligns with Tesla styling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my Tesla Model Y Überturbine wheels?\u003c\/h3\u003e\n\n\u003cp\u003eThey are engineered from a 1:1 mold of the original Tesla 21\" Überturbine wheel and are compatible only with Model Y years 2020–2024. They will not fit other wheel designs or the 2025 Juniper wheel update, so verify your wheel size stamped on the tire sidewall before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible: Model Y 21\" Überturbine wheels, 2020–2024\u003c\/li\u003e\n  \u003cli\u003eNot compatible: 2025 Juniper update or non-Überturbine wheels\u003c\/li\u003e\n  \u003cli\u003eCheck tire sidewall for exact 21\" designation\u003c\/li\u003e\n  \u003cli\u003eWatch the provided installation guide for visual confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the material and how does it stand up to weather and wear?\u003c\/h3\u003e\n\n\u003cp\u003eRAYLUXE uses high-grade ABS plastic that is non-toxic, odorless, and engineered for outdoor durability. The rings resist fading, cracking, and temperature-related deformation so they maintain fit and appearance across seasons.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUV-resistant matte finish to reduce sun fade\u003c\/li\u003e\n  \u003cli\u003eHeat-stable formulation for hot pavement and summer driving\u003c\/li\u003e\n  \u003cli\u003eScratch-resistant surface that hides light abrasions\u003c\/li\u003e\n  \u003cli\u003eLightweight construction avoids adding unsprung mass to wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install or remove these rim protectors?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is tool-free and designed for a quick DIY fit: apply the included foam trim, align with the valve stem, and press until each clip engages. Removal is equally simple and leaves the wheel intact, making these ideal for drivers who want reversible protection.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes foam adhesive strip for snug, vibration-resistant fit\u003c\/li\u003e\n  \u003cli\u003eValve-stem alignment feature speeds positioning\u003c\/li\u003e\n  \u003cli\u003eSnap-on clips secure the ring without drilling or adhesives to the wheel\u003c\/li\u003e\n  \u003cli\u003eRemoves cleanly for wheel washing or seasonal changeover\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? RAYLUXE 21\" rim protectors are tailored for Tesla Model Y owners (2020–2024) who want to prevent curb rash, maintain a like-new wheel look, and achieve a subtle visual upgrade in matte black. They suit daily city drivers, new Tesla owners concerned about parking scratches, and anyone wanting a reversible, tool-free protective solution that complements the Überturbine aesthetic.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fit Tesla Model Y wheels from all years?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Model Y 21\" Überturbine wheels from 2020–2024 only. They are not compatible with the 2025 Juniper update.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install them myself without tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Installation is tool-free: apply the foam strip, align with the valve stem, and press until the clips snap into place.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"RAYLUXE","offers":[{"title":"Default Title","offer_id":67584990576825,"sku":"B0DH2KSG1F","price":192.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/rayluxe-front-view-21-inch-uberturbine-rim-protector.jpg?v=1790462459"},{"product_id":"lectron-level-1-tesla-nacs-portable-ev-charger-12a-120v-wifi-app-control-16ft-nacs-cable","title":"Lectron Level 1 Tesla\/NACS Portable EV Charger — 12A 120V, WiFi App Control, 16ft NACS Cable","description":"\u003cp\u003e\u003cstrong\u003eThe Lectron Level 1 Tesla Charger is a compact, WiFi-enabled 12 amp, 120V portable EV charger with a 16-foot NACS cable and app control for convenient home or travel charging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for Tesla vehicles and any EV using the North American Charging Standard (NACS), this Lectron charger turns a standard NEMA 5-15 outlet into an overnight charging solution. It delivers reliable Level 1 charging at up to 1.44 kW, pairs with the Lectron app for monitoring and scheduling, and includes built-in safety protections and a weather-resistant control box for peace of mind on the road or at home.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this charger restore range for my Tesla or NACS EV?\u003c\/h3\u003e\n\n\u003cp\u003eThe Lectron Level 1 unit supplies up to 12 amps at 120 volts, producing roughly 30–40 miles of range during an overnight charge depending on your vehicle’s efficiency. It’s intended for daily top-ups and situations where slower, steady charging fits your routine.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOutput: up to 1.44 kW (12A × 120V)\u003c\/li\u003e\n  \u003cli\u003eEstimated overnight range: about 30–40 miles, dependent on model and conditions\u003c\/li\u003e\n  \u003cli\u003eIdeal for home garages, apartments, and travel when high-power stations aren’t available\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat smart features does the Lectron app control provide?\u003c\/h3\u003e\n\n\u003cp\u003eThe WiFi-enabled charger links to the Lectron mobile app to let you start\/stop charging, set schedules, view real-time session data, and limit charging by kWh. Remote control and history logs help you manage electricity usage and plan charging when rates are lower.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRemote start\/stop via app for convenient control\u003c\/li\u003e\n  \u003cli\u003eScheduling to charge during off-peak electricity hours\u003c\/li\u003e\n  \u003cli\u003eReal-time session monitoring and kWh limits to manage energy use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the charger safe and robust enough for everyday use?\u003c\/h3\u003e\n\n\u003cp\u003eSafety protections are built into the unit to detect overvoltage, overcurrent, and short circuits, with status displayed by LEDs. The control housing is IP67-rated for water and dust resistance, and the kit includes a durable carrying case for storage and transport.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOvervoltage, overcurrent, and short-circuit protection\u003c\/li\u003e\n  \u003cli\u003eLED status indicator for quick diagnostics\u003c\/li\u003e\n  \u003cli\u003eIP67-rated control box and protective carrying case for durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and compatible is this charger for traveling or shared locations?\u003c\/h3\u003e\n\n\u003cp\u003eThe lightweight design and included carrying case make the Lectron Level 1 charger simple to move between home, hotels, or friends’ houses. It uses a standard NEMA 5-15 plug so it can plug into most household outlets, and the NACS connector fits Tesla vehicles and other NACS-compatible EVs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStandard NEMA 5-15 plug fits common 120V outlets\u003c\/li\u003e\n  \u003cli\u003e16-foot NACS cable gives flexible reach to your vehicle\u003c\/li\u003e\n  \u003cli\u003eCompact form and carrying case simplify storage and transport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Lectron Level 1 Tesla Charger suits drivers who need an easy, portable charging option for nightly top-ups or travel—owners of Tesla models and any EV using the NACS standard who prioritize convenience, app-based control, and compact storage over fast charging. It’s a practical solution for apartment dwellers, occasional travelers, and anyone seeking a dependable backup or primary home charger when higher-power stations aren’t required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this charger work with non-Tesla NACS EVs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Lectron charger uses the NACS connector and is compatible with Tesla and any EV that supports the NACS standard.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special wiring or installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No hardwired installation is required; it plugs into a standard NEMA 5-15 120V outlet for plug-and-play use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lectron","offers":[{"title":"Default Title","offer_id":67584995360953,"sku":"B0DSVYMTMX","price":388.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lectron-front-view-plugged-into-nema-outlet.jpg?v=1790462630"},{"product_id":"wennebird-tesla-model-3-carpet-floor-mats-2024-2026-3-pc-waterproof-non-slip-plush","title":"WENNEBIRD Tesla Model 3 Carpet Floor Mats 2024-2026, 3‑Pc — Waterproof, Non‑Slip Plush","description":"\u003cp\u003e\u003cstrong\u003eThese WENNEBIRD 3-piece carpet floor mats are custom-made to fit the 2024–2026 Tesla Model 3, offering thick, multilayer protection, a non-slip backing, and a premium stitched finish for year-round use.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a 2024–2026 Tesla Model 3 and want factory-matching style plus stronger protection than universal liners, this 3-piece WENNEBIRD set covers the front and rear seating zones with a plush carpet surface and a waterproof mid-layer. The mats are precisely contoured to Tesla’s floorplan, install with OEM anchor compatibility, and use a friction-claw backing to stay put without harming factory flooring.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these mats improve daily protection for my Model 3?\u003c\/h3\u003e\n\u003cp\u003eThe WENNEBIRD carpet mats add a thick 0.6-inch barrier that traps dirt and moisture before they reach your vehicle’s carpet. A TPE waterproof layer blocks liquids while the plush top reduces noise and looks refined compared with rubber alternatives.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e0.6-inch multilayer construction with carpet, waterproof TPE, and a grip backing\u003c\/li\u003e\n  \u003cli\u003eDriver’s anti-slip heel pad for long-term wear resistance\u003c\/li\u003e\n  \u003cli\u003eProtects against mud, salt, rain, snow, and spills\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these mats stay securely in place during everyday driving?\u003c\/h3\u003e\n\u003cp\u003eYes — WENNEBIRD uses a unique \"Friction Claws\" backing combined with built-in retention clips that align with Tesla OEM anchors. That design keeps each mat from sliding while preserving the vehicle’s factory fastening points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRetention clips match OEM anchor positions for quick, stable installation\u003c\/li\u003e\n  \u003cli\u003eFriction-claw underside increases grip without adhesive or fasteners\u003c\/li\u003e\n  \u003cli\u003eDriver’s mat includes an anti-slip heel pad for pedal-area stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy are these mats to clean and maintain?\u003c\/h3\u003e\n\u003cp\u003eMaintenance is straightforward: lift out the mats, shake or vacuum loose debris, rinse with water if needed, and air-dry. Because the mid-layer is waterproof, liquids won’t penetrate to the vehicle floor, and the carpet face keeps an upscale appearance that’s simple to refresh.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick removal with OEM-compatible retention clips\u003c\/li\u003e\n  \u003cli\u003eRinse with water, vacuum, or spot-clean for fast upkeep\u003c\/li\u003e\n  \u003cli\u003eCarpet face resists staining and hides everyday wear better than plain rubber\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these materials safe and durable for long-term use?\u003c\/h3\u003e\n\u003cp\u003eWENNEBIRD mats are manufactured from SGS-certified, odorless materials and comply with FMVSS 302 flammability standards for interior materials. The hot-press multilayer build and leather-stitched edge increase longevity while delivering a refined aesthetic that matches modern interiors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSGS-certified, non-toxic materials without rubber odor\u003c\/li\u003e\n  \u003cli\u003eFMVSS 302 compliance for interior flammability safety\u003c\/li\u003e\n  \u003cli\u003eHot-press construction and leather-stitched trim for lasting edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These WENNEBIRD carpet floor mats suit Tesla Model 3 owners (2024–2026) who want a full-coverage, upscale-looking floor solution that balances comfort, noise reduction, and all-season protection. They’re ideal for drivers who prefer a carpeted finish over heavy rubber, need OEM-compatible anchoring, and want easy maintenance without sacrificing a refined interior appearance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these mats fit 2024–2026 Tesla Model 3 exactly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The set is custom-cut for the 2024–2026 Model 3 and uses retention clips aligned to OEM anchor points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I rinse and air-dry these carpet mats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Remove, rinse with water or vacuum, then air-dry; the TPE layer prevents liquid penetration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WENNEBIRD","offers":[{"title":"Default Title","offer_id":67584998146233,"sku":"B0CJJQQ5MR","price":275.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wennebird-front-passenger-mat-front-packaging.jpg?v=1790462791"},{"product_id":"tesfram-front-license-plate-holder-for-2026-tesla-model-y-juniper-premium-no-drill-cnc-aluminum-anti-theft","title":"TesFram Front License Plate Holder for 2026 Tesla Model Y Juniper Premium — No-Drill CNC Aluminum, Anti-Theft","description":"\u003cp\u003e\u003cstrong\u003eTesFram's 2026 Model Y Juniper Premium front license plate holder is a precision, no-drill mounting kit that secures your plate without blocking the front camera and adds tamper-resistant protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a 2026 Tesla Model Y Juniper Premium (with front and rear lightbars), this license plate bracket is engineered specifically for that bumper profile. Fully CNC machined from aircraft-grade aluminum and anodized for corrosion resistance, the mount preserves your vehicle's finish while delivering a clean, factory-like installation. It’s designed to work with Tesla’s latest driver assistance systems by keeping the front camera view unobstructed, and it uses a specialized TesFram anti-theft fastener and one-key handle for easy, secure operation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this bracket avoid drilling into my Model Y Juniper bumper?\u003c\/h3\u003e\n\n\u003cp\u003eThe TesFram kit uses the existing bumper geometry and a precision-fit CNC design so no new holes are needed. The mount slides into place and locks with the supplied tamper-proof hardware and one-key handle, preserving your car’s factory finish and resale value.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% CNC machined for exact bumper alignment\u003c\/li\u003e\n  \u003cli\u003eNo drilling or cutting required\u003c\/li\u003e\n  \u003cli\u003eInstalls using provided hardware and a single keyed handle\u003c\/li\u003e\n  \u003cli\u003eRemovable with the included TesFram tool only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this plate holder interfere with Autopilot or the front bumper camera?\u003c\/h3\u003e\n\n\u003cp\u003eThe bracket is molded to avoid the camera’s line of sight and maintain full functionality of Tesla’s sensors. Its low-profile position and precise cutouts keep the lens and field of view clear so FSD features remain effective.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to preserve unobstructed camera visibility\u003c\/li\u003e\n  \u003cli\u003eCompatible with FSD V14+ sensor layout\u003c\/li\u003e\n  \u003cli\u003eLow-profile placement minimizes reflections and glare\u003c\/li\u003e\n  \u003cli\u003eTested to sit outside the camera’s critical viewing angles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow secure is the TesFram anti-theft system?\u003c\/h3\u003e\n\n\u003cp\u003eSecurity relies on a tamper-resistant screw and a unique TesFram removal tool provided with the kit. The keyed one-handle locks the plate into position quickly, and only someone with the special tool can remove the bracket, deterring opportunistic theft.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes tamper-proof screw and special TesFram removal tool\u003c\/li\u003e\n  \u003cli\u003eOne-key handle for fast, tool-assisted locking and unlocking\u003c\/li\u003e\n  \u003cli\u003eConcealed fasteners reduce tampering opportunities\u003c\/li\u003e\n  \u003cli\u003eDurable construction withstands repeated use without loosening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and weather resistance can I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe mount is built from aircraft-grade aluminum with an anodized finish for long-term durability. That combination resists rust, fading, and corrosion so the bracket handles road salt, snow, high heat, and coastal moisture without compromising fit or appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAircraft-grade aluminum body for strength and light weight\u003c\/li\u003e\n  \u003cli\u003eAnodized coating for corrosion and UV resistance\u003c\/li\u003e\n  \u003cli\u003eDesigned to endure harsh climates and road conditions\u003c\/li\u003e\n  \u003cli\u003eScratch-resistant finish preserves vehicle aesthetics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This TesFram plate holder is intended for owners of the 2026 Tesla Model Y Juniper Premium (with front and rear lightbars) who want a factory-friendly, no-drill solution that maintains camera visibility and adds theft resistance. Do not use this product on 2026 Model Y Performance or Standard trims, or other Model Y\/Model 3\/Model X variants unless specified. If you value a neat, durable mount that preserves your bumper and Tesla’s driver-assist capabilities, this kit is built for you.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2026 Model Y Performance or Standard?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This TesFram holder fits only the 2026 Model Y Juniper Premium with front and rear lightbars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require drilling into the bumper?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit installs without drilling, using a precision CNC design and supplied tamper-proof hardware.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TesFram","offers":[{"title":"Default Title","offer_id":67585004142777,"sku":"B0G5NNP7VX","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tesfram-front-view-mounted-on-2026-model-y-juniper.jpg?v=1790463061"},{"product_id":"huacaitu-tesla-nacs-to-ccs1-adapter-v3-supercharger-compatible-500a-high-power-dc-charging","title":"HUACAITU Tesla NACS to CCS1 Adapter — V3 Supercharger Compatible, 500A High‑Power DC Charging","description":"\u003cp\u003e\u003cstrong\u003eHUACAITU Tesla Supercharger Adapter converts a Tesla NACS V3 plug to CCS1 so eligible non‑Tesla EVs can access Tesla V3 Superchargers for high‑power DC fast charging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you drive a CCS1‑equipped electric vehicle and want to tap into Tesla's widespread V3 Supercharger network, this HUACAITU NACS to CCS adapter is built to bridge that gap. It is engineered specifically for Tesla V3 DC Superchargers (not compatible with V1, V2, or V4 Superchargers) and provides a high‑current, weather‑resistant connection so approved cars from many manufacturers can charge at Tesla stations when available.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles can use this adapter?\u003c\/h3\u003e\n\u003cp\u003eThe adapter supports a wide range of CCS1 EVs from many mainstream and premium brands, but compatibility varies by model year and DC‑charging capability. Always confirm your vehicle supports DC fast charging and check manufacturer guidance for CCS1 pinouts and software allowances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with select models from Ford, Rivian, GM, Volvo, Polestar, Nissan, Lucid, Mercedes‑Benz, Hyundai, Genesis, Kia, Honda, Acura, JLR, Audi, Porsche, Toyota, Volkswagen, Subaru and BMW.\u003c\/li\u003e\n  \u003cli\u003eDoes NOT work with Tesla V1\/V2\/V4 Superchargers, home chargers, or non‑Tesla destination or mobile chargers.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with many older or plug‑in hybrid models (e.g., some Ford PHEVs, Chevy Spark EV 2013–2016, select Kia Soul EVs, etc.).\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle’s DC fast‑charging support before purchase; incompatible vehicles will not charge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast will my CCS car charge with this adapter?\u003c\/h3\u003e\n\u003cp\u003eDesigned for high‑power DC charging, the HUACAITU adapter delivers up to 500A at 1000V (500 kW theoretical peak), enabling very rapid replenishment when the vehicle’s battery and station allow. Real‑world speeds depend on your vehicle’s maximum accepted charging rate, battery state of charge, and site conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum specification: 500A \/ 1000V DC, supporting up to 500 kW charging rates at compatible V3 Superchargers.\u003c\/li\u003e\n  \u003cli\u003eCompany benchmark: up to ~150 miles of range in roughly 15 minutes under ideal conditions and vehicle acceptance limits.\u003c\/li\u003e\n  \u003cli\u003eActual charge times vary by vehicle, battery temp, and station load; your car’s onboard limits govern final speeds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the adapter built for safety and durability?\u003c\/h3\u003e\n\u003cp\u003eHUACAITU engineered this adapter with robust materials and active protections to handle frequent use and harsh weather. Conductor materials and a flame‑resistant housing improve longevity while a thermal cutoff helps prevent overheating during heavy DC sessions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConductor is pure copper with silver plating for low resistance and reliable current flow.\u003c\/li\u003e\n  \u003cli\u003eCasing: glass‑fiber reinforced PC rated UL94 V0 for high flame retardancy.\u003c\/li\u003e\n  \u003cli\u003eIP55 ingress protection against dust and water spray, and a temperature kill switch that trips at 194°F (90°C).\u003c\/li\u003e\n  \u003cli\u003eIncreased mechanical tightness for a secure connection—requires firmer insertion and removal for secure contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat limitations and practical notes should I be aware of?\u003c\/h3\u003e\n\u003cp\u003eThis adapter is purpose‑built for Tesla V3 Superchargers only and will not function with many other charging systems or certain vehicle models. Plan routes using both the Tesla app and your vehicle’s charging app to confirm V3 Supercharger availability before travel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOnly compatible with Tesla V3 Superchargers—will not work with V1, V2, V4, home\/AC chargers, or destination chargers.\u003c\/li\u003e\n  \u003cli\u003eUse the Tesla app plus your EV’s app to locate compatible V3 stations before departure.\u003c\/li\u003e\n  \u003cli\u003eNot intended for non‑CCS1 standards or plug‑in hybrids lacking DC fast‑charge capability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The HUACAITU NACS to CCS1 adapter is aimed at owners of CCS1 electric vehicles that support DC fast charging and who want access to Tesla’s V3 Supercharger network for faster, more convenient long‑distance travel. It’s a practical accessory for frequent travelers, fleet operators, and EV drivers in regions where Tesla V3 stations expand public fast‑charging options. If your car doesn’t support DC fast charging or your local Tesla stations are not V3, this adapter will not provide benefit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter work with Tesla V2 or V4 Superchargers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The HUACAITU adapter is compatible only with Tesla V3 Superchargers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the adapter support every CCS1 vehicle brand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports many CCS1 models, but confirm your vehicle’s DC charging support and year before buying.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HUACAITU","offers":[{"title":"Default Title","offer_id":67585007714489,"sku":"B0DF4TQPSF","price":292.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/huacaitu-adapter-front-view.jpg?v=1790463284"},{"product_id":"sweetglow-tesla-model-y-19-matte-black-wheel-covers-14-spoke-abs-hubcaps-with-rim-protection","title":"Sweetglow Tesla Model Y 19\" Matte Black Wheel Covers — 14‑Spoke ABS Hubcaps with Rim Protection","description":"\u003cb\u003eMatte-black 19\" ABS wheel covers by Sweetglow replace the stock look and shield your Tesla Model Y (2021–2024) rims with a precision fit and Überturbine-inspired 14-spoke styling.\u003c\/b\u003e\n\n\u003cp\u003eIf you want to refresh your Model Y’s appearance while protecting the rim edges from curb nicks, these Sweetglow hubcaps are engineered for a tight, factory-like fit. Made from durable ABS and molded to match the OEM wheel profile, they install quickly and give your vehicle a modern, low-profile look without permanent modification. Note: these covers are not compatible with Tesla Y Juniper 2026 models.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these wheel covers attach and how hard are they to install?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed for simplicity—no specialized tools or wheel removal required in most cases. Each set includes adhesive tape for secure rim contact and a 1:1 mold ensures the cover aligns with the wheel lip and bolt recesses for a snug fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes complimentary adhesive tape for rim mounting\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit over the wheel without removing the tire\u003c\/li\u003e\n  \u003cli\u003ePrecision molding reduces alignment adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these hubcaps protect my rims from damage?\u003c\/h3\u003e\n\u003cp\u003eYes — the covers add a physical barrier between the curb and your rim edge, helping reduce cosmetic scratches and minor scuffs. The matte ABS material absorbs impacts better than exposed painted alloy, shielding the original wheel finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCovers the rim lip and wheel surface to prevent curb rash\u003c\/li\u003e\n  \u003cli\u003eABS construction resists cracking and chips from light impacts\u003c\/li\u003e\n  \u003cli\u003eReplaceable and inexpensive compared with wheel repair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the Sweetglow design change about my Model Y’s appearance?\u003c\/h3\u003e\n\u003cp\u003eThe matte black Überturbine-inspired 14-spoke layout gives the Model Y a sleeker, sportier face while maintaining a subtle, OEM-friendly presence. The low-gloss finish reduces glare and visually lowers the wheel profile for a more aggressive stance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e14-spoke design echoes performance turbine styling\u003c\/li\u003e\n  \u003cli\u003eMatte finish hides brake dust and minor blemishes\u003c\/li\u003e\n  \u003cli\u003eDark color complements glass and trim for a cohesive look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo these wheel covers fit all Tesla Model Y trims and years?\u003c\/h3\u003e\n\u003cp\u003eThese covers were created from a 1:1 mold specifically for Tesla Model Y wheels produced 2021 through 2024 and will fit the stock 19\" wheel profile from those years. They are not compatible with the Tesla Y Juniper 2026 wheel design or other non-standard aftermarket wheels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Tesla Model Y (2021, 2022, 2023, 2024)\u003c\/li\u003e\n  \u003cli\u003eNot compatible: Tesla Y Juniper 2026 and non-OEM wheel variants\u003c\/li\u003e\n  \u003cli\u003eCheck wheel diameter and bolt recess before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Sweetglow’s 19\" matte black wheel covers are aimed at Model Y owners who want a cost-effective aesthetic upgrade and reliable rim protection without changing wheels. Ideal for drivers who rent, lease, or prefer reversible styling updates, these hubcaps deliver a refined, low-maintenance appearance while helping preserve factory rims.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these covers compatible with non-stock aftermarket wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They are molded for stock Tesla Model Y 19\" wheels (2021–2024); aftermarket wheels may differ in profile.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I remove these covers later without damaging the wheel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. When removed carefully the adhesive tape peels off and the underlying rim finish remains intact.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Sweetglow","offers":[{"title":"Default Title","offer_id":67585008173241,"sku":"B0DMDPJGP3","price":417.66,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/sweetglow-model-y-19-front-view.jpg?v=1790463330"},{"product_id":"dasbecan-tesla-model-3-right-tail-light-2017-2023-3-pin-led-plug-and-play-replacement","title":"Dasbecan Tesla Model 3 Right Tail Light 2017–2023 3‑Pin LED Plug-and-Play Replacement","description":"\u003cp\u003e\u003cstrong\u003eDasbecan right-side rear tail light engineered to replace Tesla Model 3 part 1077398-00-G for 2017–2023 vehicles with a 3-pin connector.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you’re restoring, repairing, or upgrading a Tesla Model 3’s rear lighting, this Dasbecan right (passenger-side) tail light is built to match original fit and function. It’s designed for Model 3 years 2017 through 2023 and replaces OEM numbers 1077398-00-G, 1077398, 1077398-00-H, and 1077398-00-F. The assembly uses a 3-pin connector, is plug-and-play for compatible cars, and combines durable ABS+PC materials with integrated LED illumination.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tail light fit my Tesla Model 3?\u003c\/h3\u003e\n\n\u003cp\u003eYes — if your car is a Tesla Model 3 from model years 2017 through 2023 and the original unit uses a 3-pin plug. It is not compatible with vehicles that require a 4-pin connector and will not fit Model Y (2021–2023) rear assemblies.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2017, 2018, 2019, 2020, 2021, 2022, 2023 (Model 3 only)\u003c\/li\u003e\n  \u003cli\u003eConnector: 3-pin plug — confirm your original connector type\u003c\/li\u003e\n  \u003cli\u003eNot for Model Y 2021–2023 or any 4-pin tail light applications\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM: 1077398-00-G \/ 1077398 \/ 1077398-00-H \/ 1077398-00-F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and electrical connection?\u003c\/h3\u003e\n\n\u003cp\u003eThis Dasbecan unit is made to install directly in place of the original light using an identical mounting and wiring layout when your vehicle has the 3-pin harness. No special programming or soldering is required — simply unplug the old assembly and plug the replacement into the factory connector.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play design for 3-pin Model 3 setups\u003c\/li\u003e\n  \u003cli\u003eNo additional wiring adapters required for compatible cars\u003c\/li\u003e\n  \u003cli\u003eMounting points match OEM dimensions for a secure fit\u003c\/li\u003e\n  \u003cli\u003eInstallation typically requires basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and performance features?\u003c\/h3\u003e\n\n\u003cp\u003eThe lamp features a red lens over a black housing built from ABS+PC plastics for impact resistance and dimensional stability. Integrated LEDs provide clear illumination, and the sealed design resists water, dust, and internal fogging to keep the light functioning reliably in adverse conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterials: ABS + PC plastic shell for durability\u003c\/li\u003e\n  \u003cli\u003eLighting: LED light source for bright, consistent output\u003c\/li\u003e\n  \u003cli\u003eProtection: waterproof, dustproof, and anti-fog construction\u003c\/li\u003e\n  \u003cli\u003eCommon failure fixes: addresses cracked housings, leaks, and vapor intrusion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm I'm ordering the correct part?\u003c\/h3\u003e\n\n\u003cp\u003eCheck the part number on your existing assembly and inspect the vehicle harness to verify a 3-pin connector. Compare the OEM numbers listed above and ensure your vehicle is a Model 3, not a Model Y, before purchase to avoid fitment issues.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompare to OEM part numbers: 1077398-00-G and variants\u003c\/li\u003e\n  \u003cli\u003eVerify your vehicle model year and that it’s a Model 3\u003c\/li\u003e\n  \u003cli\u003eConfirm the connector type: 3-pin required (not 4-pin)\u003c\/li\u003e\n  \u003cli\u003eContact support with photos of your current tail light if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Dasbecan right rear tail light is aimed at Tesla Model 3 owners and repair shops needing a direct-fit replacement for 2017–2023 Model 3s that use the 3-pin connector. It’s ideal for drivers replacing a cracked, leaking, or malfunctioning passenger-side rear lamp who want OEM-style appearance and LED performance without modification. If your car requires a 4-pin unit or is a Model Y 2021–2023, choose a compatible alternative instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this tail light suitable for Model Y?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Dasbecan right tail light fits Tesla Model 3 (2017–2023) only and is not compatible with Model Y 2021–2023.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this unit use a 3-pin or 4-pin connector?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This replacement uses a 3-pin connector and will not fit vehicles requiring a 4-pin tail light.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dasbecan","offers":[{"title":"Default Title","offer_id":67585008664761,"sku":"B0D9658BHY","price":227.78,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/dasbecan-right-tail-light-front-view.jpg?v=1790463352"},{"product_id":"lenz-nacs-to-ccs1-adapter-for-tesla-superchargers-500a-ul-2252-certified-ccs1-compatibility","title":"LENZ NACS to CCS1 Adapter for Tesla Superchargers — 500A UL 2252 Certified, CCS1 Compatibility","description":"\u003cp\u003e\u003cstrong\u003eLENZ NACS to CCS1 Adapter lets approved CCS1 electric vehicles connect to Tesla NACS Superchargers for high-power DC fast charging up to 500A.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for drivers who own a CCS1-equipped EV that Tesla has approved for Supercharger access, the LENZ adapter provides a robust, safety-certified bridge between CCS1 vehicles and NACS (Tesla) Supercharger stalls. Built and tested to UL 2252 standards with a 500A \/ 1000V rating, it focuses on secure, high-current charging, precision-molded connectors, and straightforward operation using the Tesla app for session control and payment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the LENZ adapter enable charging at Tesla Superchargers?\u003c\/h3\u003e\n\u003cp\u003eThe adapter physically converts a Tesla-style NACS plug to mate with CCS1 vehicle inlets while preserving communication and locking functions necessary for DC fast charge sessions. After connecting, the user starts and pays for charging through the Tesla app or Supercharger interface where supported.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnect adapter to the NACS charger first, then plug into the vehicle.\u003c\/li\u003e\n  \u003cli\u003eSupports DC fast charge only — not for Level 1 or Level 2 AC charging.\u003c\/li\u003e\n  \u003cli\u003eInitiate and pay for sessions via the Tesla app where Supercharger access is granted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and performance standards does this adapter meet?\u003c\/h3\u003e\n\u003cp\u003eLENZ built this adapter to meet UL 2252 safety requirements with SGS verification, ensuring electrical safety, mechanical durability, and thermal performance under heavy-duty DC charging. The 500A and 1000V ratings indicate capability for high-power charging on approved stalls and vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUL 2252 compliant and SGS certified for safety assurance.\u003c\/li\u003e\n  \u003cli\u003eRated for up to 500A continuous DC current and 1000V systems.\u003c\/li\u003e\n  \u003cli\u003eSecure locking connector and precision molded housings to reduce wear and heat buildup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles will this adapter work with and what limitations should I know?\u003c\/h3\u003e\n\u003cp\u003eThis adapter works only with CCS1 electric vehicles that have been granted Supercharger access by Tesla. It will not grant access to vehicles that Tesla has not approved, and it is not compatible with AC-level charging equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible only with CCS1 EVs that Tesla has authorized for Supercharger use.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Level 1 (120V) or Level 2 (AC) chargers or with vehicles using other inlet standards.\u003c\/li\u003e\n  \u003cli\u003eAlways confirm Supercharger eligibility in your vehicle’s app or with your manufacturer before relying on the adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use and care for the LENZ adapter for reliable performance?\u003c\/h3\u003e\n\u003cp\u003eUse the adapter by connecting it to the Supercharger cable first, then to your vehicle; follow Tesla app prompts to start and stop sessions. Store the adapter dry in its protective travel case and inspect connectors for damage before each use to maintain safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAttach to the NACS cable first, then plug into your vehicle inlet.\u003c\/li\u003e\n  \u003cli\u003eUse the included protective travel case to prevent moisture and debris ingress.\u003c\/li\u003e\n  \u003cli\u003eCheck seals and contacts for wear; do not use if damaged or cracked.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The LENZ NACS to CCS1 Adapter is intended for CCS1 EV owners who already have Supercharger approval from Tesla and need a high-power, safety-certified adapter for convenient DC fast charging on NACS stations. It’s ideal for drivers who require robust, repeatable performance at public Superchargers and value compliance testing, secure locking, and manufacturer support. If your EV hasn’t been authorized for Tesla Superchargers, contact your vehicle manufacturer or Tesla to verify access before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter let any CCS1 EV use Tesla Superchargers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It only works for CCS1 vehicles that Tesla has explicitly approved for Supercharger access.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the LENZ adapter safe for high-power charging?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is UL 2252 compliant, SGS certified, and rated for 500A and 1000V for DC fast charging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LENZ","offers":[{"title":"Default Title","offer_id":67585009221817,"sku":"B0F4Q3DH1F","price":279.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lenz-adapter-front-view.jpg?v=1790463394"},{"product_id":"iyilo-level-2-ev-charger-for-tesla-nacs-40a-9-6kw-home-charger-with-wi-fi-safety-sensors","title":"IYILO Level 2 EV Charger for Tesla NACS — 40A\/9.6kW Home Charger with Wi‑Fi \u0026 Safety Sensors","description":"\u003cp\u003e\u003cstrong\u003eThe IYILO Level 2 EV Charger is a 40A, 9.6 kW home charger with a native NACS (Tesla-style) connector, built-in temperature safety sensors, Wi‑Fi smart controls, and UL\/ETL\/Energy Star certifications for reliable daily charging.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, heavy‑duty charger converts a 240V NEMA 14‑50 outlet into fast home charging for NACS-equipped vehicles and plug‑in hybrids. Designed for North American homes, it pairs a 25 ft rugged cable and adaptive current control with app-based scheduling, energy tracking, and multiple protection layers so homeowners can charge confidently and more efficiently than with a Level 1 cordset.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will this charger restore driving range?\u003c\/h3\u003e\n\n\u003cp\u003eThe IYILO charger delivers up to 9.6 kW at 40 amps, typically adding as much as 38 miles of range per hour depending on your vehicle’s efficiency. Current is adjustable in 1A steps from 6A to 40A so you can match your home circuit capacity. Plug \u0026amp; Charge support enables immediate charging when your vehicle connects.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaximum output: 40A \/ 9.6 kW for fast Level 2 charging\u003c\/li\u003e\n  \u003cli\u003eAdjustable current: 6A–40A in 1A increments for circuit compatibility\u003c\/li\u003e\n  \u003cli\u003eRange gain: up to ~38 miles per hour on typical EVs\u003c\/li\u003e\n  \u003cli\u003eConnector: native NACS for Tesla‑style vehicles; J1772 adapter required separately for other EVs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety features protect my home and vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eSafety is emphasized through multiple certified protections and active thermal monitoring. NTC sensors sit in both the plug and the NACS connector to watch temperatures in real time; the charger will reduce current or shut down if it detects abnormal heat. The unit also carries UL, ETL, Energy Star, and leakage\/overcurrent protections to meet standard electrical safety expectations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBuilt‑in NTC temperature sensors in plug and connector for live monitoring\u003c\/li\u003e\n  \u003cli\u003eAutomatic current reduction or shutdown on overheating\u003c\/li\u003e\n  \u003cli\u003eCertifications: UL 2231, UL 2594, ETL, Energy Star, plus multiple safety protections\u003c\/li\u003e\n  \u003cli\u003eNEMA 4 waterproof rating and robust cable for outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the smart app make charging easier and cheaper?\u003c\/h3\u003e\n\n\u003cp\u003eThe IYILO App gives control over schedules, time‑of‑use pricing, and multi‑user access so you can charge during lower‑cost windows and track energy expenses. It supports scheduled charging, RFID access, and over‑the‑air firmware updates to keep the charger current. Note: only 2.4 GHz Wi‑Fi networks are supported—not 5 GHz.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSchedule charging to match off‑peak electricity rates (TOU)\u003c\/li\u003e\n  \u003cli\u003eReal‑time energy and cost monitoring, plus multi‑account management\u003c\/li\u003e\n  \u003cli\u003eRFID and plug‑and‑charge modes for convenient access control\u003c\/li\u003e\n  \u003cli\u003eOTA firmware updates via the IYILO app ensure ongoing improvements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does installation and support look like?\u003c\/h3\u003e\n\n\u003cp\u003eThe charger is packaged with an installation guide and online resources; setup is straightforward for a NEMA 14‑50 outlet. IYILO provides US‑based customer support, instructional videos, and a 3‑year warranty for added peace of mind. The product is also listed in several utility EV programs for potential local incentives.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes step‑by‑step installation guide and app manuals\u003c\/li\u003e\n  \u003cli\u003e25 ft heavy‑duty cable for flexible parking arrangements\u003c\/li\u003e\n  \u003cli\u003e3‑year warranty plus weekday customer support hours\u003c\/li\u003e\n  \u003cli\u003eParticipates in multiple utility incentive programs for eligible regions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The IYILO Level 2 EV Charger suits Tesla and other NACS‑equipped drivers who want faster home charging, active temperature protection, and smart control without commercial installation complexity. It’s ideal for homeowners with a 240V outlet seeking reliable, certified daily charging and those who value app scheduling, energy tracking, and utility program compatibility. If you drive a J1772‑only vehicle, plan to use a separate adapter; otherwise this unit is configured for direct plug‑in convenience with modern Tesla‑style EVs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this charger compatible with Tesla vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It has a native NACS connector for Tesla-style charging and works with all NACS-equipped EVs and PHEVs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a special outlet or adapter to use this at home?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It plugs into a standard 240V NEMA 14-50 outlet. J1772 vehicles require a separate J1772-to-NACS adapter (not included).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IYILO","offers":[{"title":"Default Title","offer_id":67585039499449,"sku":"B0GT576N95","price":926.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/iyilo-front-view-charger.jpg?v=1790464664"},{"product_id":"iyilo-level-2-ev-charger-for-tesla-nacs-48a-11-5-kw-25-ft-cable-app-control-ul-etl-certified","title":"IYILO Level 2 EV Charger for Tesla NACS — 48A (11.5 kW), 25 ft Cable, App Control \u0026 UL\/ETL Certified","description":"\u003cp\u003e\u003cstrong\u003eThe IYILO Level 2 EV Charger is a 48A (11.5 kW) hardwired home charging station with a native NACS connector that delivers fast, safe, and smart charging for Tesla and NACS-equipped EVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for homeowners who want faster daily charging and intelligent load management, this IYILO 48A charger provides up to 46 miles of range per hour when installed on a dedicated 60A circuit. It pairs a heavy-duty 25 ft cable and native Tesla-style (NACS\/J3400) connector with advanced safety features, app control, and broad utility program compatibility. Multiple certifications including UL 2594, ETL and Energy Star back its reliability for residential and light commercial settings.\u003c\/p\u003e\n\n\u003ch3\u003eHow much faster will this charger charge my EV compared to a Level 1 plug?\u003c\/h3\u003e\n\n\u003cp\u003eAt its maximum 48A output (11.5 kW), the IYILO charger can provide roughly 46 miles of driving range per hour, which is commonly up to nine times quicker than typical Level 1 (120V) chargers. You can also fine-tune the current in 1A increments to match your panel and conductor capacity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum output: 48A \/ 11.5 kW (hardwired, 60A breaker required)\u003c\/li\u003e\n  \u003cli\u003eAdjustable current: 6A–48A in 1A steps for precise setup\u003c\/li\u003e\n  \u003cli\u003e25 ft heavy-duty cable for convenient parking reach\u003c\/li\u003e\n  \u003cli\u003eEstimated up to ~46 miles of range added per charging hour\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety features protect my car and home during charging?\u003c\/h3\u003e\n\n\u003cp\u003eIYILO built multiple protections into the unit to reduce overheating and circuit risk. The connector contains an NTC temperature sensor for real-time thermal monitoring, and the charger will throttle or stop charging if temperatures exceed safe thresholds. The product is also tested and certified by independent labs for electrical safety and performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnector overheat protection with NTC temperature sensing and automatic power reduction\/shutdown\u003c\/li\u003e\n  \u003cli\u003eCertified testing: UL 2594 test report, ETL, Energy Star and CSA validations\u003c\/li\u003e\n  \u003cli\u003eHigh-performance mainboard for stable operation and reduced failure modes\u003c\/li\u003e\n  \u003cli\u003eSupport for power sharing and dynamic load balancing to avoid breaker trips\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I control and monitor charging from my phone or join utility programs?\u003c\/h3\u003e\n\n\u003cp\u003eThe IYILO App provides scheduling, real-time energy tracking, and multi-user management so you can optimize charging costs using Time-of-Use (TOU) schedules. The charger supports OTA firmware updates and RFID or scheduled charging modes. IYILO is also participating with many utilities, allowing access to local incentives and rate programs where available.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApp features: TOU scheduling, energy usage\/cost tracking, OTA updates\u003c\/li\u003e\n  \u003cli\u003eConnectivity: 2.4 GHz Wi‑Fi supported (5 GHz not supported)\u003c\/li\u003e\n  \u003cli\u003eUtility program listings include ComEd, PSEG, Seattle City Light, and others\u003c\/li\u003e\n  \u003cli\u003eRFID and multi-user account capability for shared or fleet charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and installation options are supported?\u003c\/h3\u003e\n\n\u003cp\u003eThis charger natively uses a NACS (J3400) connector to support Tesla and other NACS-equipped EVs and PHEVs across North America; J1772 vehicles require a separate adapter. It’s intended for hardwired installation on a dedicated circuit, with optional accessory bundles for energy metering and power sharing between two chargers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNative NACS connector for Tesla-style compatibility; J1772 adapter required for non-NACS EVs (adapter not included)\u003c\/li\u003e\n  \u003cli\u003eHardwired installation; requires a 60A breaker and licensed electrician for max output\u003c\/li\u003e\n  \u003cli\u003ePower sharing and dynamic load balancing supported (Energy Meter available separately)\u003c\/li\u003e\n  \u003cli\u003e25 ft charging cable for flexible parking placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The IYILO Level 2 EV Charger suits homeowners, small workplaces, and multi-driver households that need faster daily charging, smart scheduling to lower charging costs, and robust safety certifications. It’s a solid choice if you drive a NACS-equipped vehicle and want a durable, app-controlled home charging station with utility program compatibility and professional support backed by a 3-year warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this charger work with Tesla vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It has a native NACS connector compatible with Tesla and other NACS-equipped EVs across North America.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What electrical setup is required for full 48A charging?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Full output needs a hardwired installation on a dedicated 60A breaker installed by a licensed electrician.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"IYILO","offers":[{"title":"Default Title","offer_id":67585039532217,"sku":"B0GT55C5JX","price":947.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/iyilo-charger-front-panel.jpg?v=1790464665"},{"product_id":"lectron-tesla-to-j1772-ev-charging-adapter-black-48a-240v-nacs-converter-for-destination-mobile-chargers","title":"Lectron Tesla to J1772 EV Charging Adapter — Black, 48A 240V NACS Converter for Destination \u0026 Mobile Chargers","description":"\u003cp\u003e\u003cstrong\u003eThe Lectron Tesla to J1772 adapter converts Tesla\/NACS charging ports to a J1772 plug, enabling up to 48 amps at 240V for compatible electric vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're at a destination charger, using a Tesla Wall Connector, or carrying a Mobile Connector, this compact Lectron adapter lets J1772-equipped EVs access Tesla and NACS charging stations. Built to expand where you can charge, it brings tens of thousands of additional charging points into reach while meeting recognized safety standards.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter expand my charging access?\u003c\/h3\u003e\n\u003cp\u003eThe Lectron adapter lets a J1772 vehicle plug into Tesla\/NACS charging equipment so you can use High Powered Wall Connectors, Destination Chargers, and Mobile Connectors. That increases your available charge options significantly, especially in areas with dense Tesla infrastructure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports connections to Tesla High Powered Wall Connectors\u003c\/li\u003e\n  \u003cli\u003eWorks with all generations of Tesla Destination Chargers\u003c\/li\u003e\n  \u003cli\u003eCompatible with Tesla Mobile Connectors for added flexibility\u003c\/li\u003e\n  \u003cli\u003eUnlocks access to over 15,000 more charging locations for J1772 EVs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat charging speeds and electrical limits should I expect?\u003c\/h3\u003e\n\u003cp\u003eThis converter supports a maximum current of 48 amps and up to 240 volts, offering faster AC charging than many smaller adapters. Real-world charging rate will depend on your vehicle’s onboard charger and the source charger’s output, but the adapter itself is rated for high-power AC delivery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum rated current: 48 A\u003c\/li\u003e\n  \u003cli\u003eMaximum voltage: 240 V\u003c\/li\u003e\n  \u003cli\u003eDesigned for AC charging only (no DC fast-charging function)\u003c\/li\u003e\n  \u003cli\u003ePerformance subject to EV and charger capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the adapter safe and durable for regular use?\u003c\/h3\u003e\n\u003cp\u003eLectron designed the adapter with portability and rugged use in mind while meeting strict safety testing. It carries SGS certification under the UL 2251 standard, indicating compliance with established EV connector safety criteria for reliable everyday use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSGS-certified to UL 2251 safety guidelines\u003c\/li\u003e\n  \u003cli\u003eCompact, durable housing for travel and storage\u003c\/li\u003e\n  \u003cli\u003eComponents selected for thermal and electrical reliability\u003c\/li\u003e\n  \u003cli\u003eEasy to handle and store in your vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use the adapter during a charging session?\u003c\/h3\u003e\n\u003cp\u003eUsing the Lectron adapter is straightforward: attach the adapter to the Tesla\/NACS plug at the station, then insert your vehicle’s J1772 plug into the adapter. Follow the charging station’s prompts and your vehicle’s on-screen instructions to start and stop charging safely.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConnect adapter to Tesla\/NACS charging connector first\u003c\/li\u003e\n  \u003cli\u003eInsert J1772 plug from vehicle into the adapter\u003c\/li\u003e\n  \u003cli\u003eBegin charging via station controls and vehicle interface\u003c\/li\u003e\n  \u003cli\u003eDisconnect in reverse order after charging completes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Lectron Tesla to J1772 adapter is ideal for owners of J1772-electric vehicles who want reliable access to Tesla\/NACS charging infrastructure. It's especially useful for drivers who travel through areas where Tesla chargers outnumber other public chargers, fleet operators seeking greater route flexibility, and EV drivers who prefer to keep a compact, high-capacity adapter in their vehicle for spontaneous charging opportunities.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this adapter work with all Tesla chargers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for Tesla High Powered Wall Connectors, Destination Chargers, and Mobile Connectors, but it supports AC only and depends on charger availability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the adapter deliver fast charging to my J1772 EV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports up to 48A at 240V; actual charge speed depends on your vehicle’s onboard charger and the station’s output.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lectron","offers":[{"title":"Default Title","offer_id":67585039728825,"sku":"B09DCTJCTV","price":271.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lectron-front-view-adapter.jpg?v=1790464685"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/kust-modely-model3-front-view.jpg?v=1790612489","url":"https:\/\/redleafauto.ca\/collections\/tesla-accessories.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}