{"title":"TPMS Sensors","description":"\u003cp\u003eReplacement tire pressure sensors in 315 MHz and 433 MHz, plus service kits. A second set of sensors saves a relearn fee at every winter tire changeover.\u003c\/p\u003e\u003cp\u003e275 products from 93 brands, including A-Premium, Autel, CDWTPS and Marsflex. Most are priced between $69 and $289 CAD.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"b-qtech-tpms-tire-pressure-sensor-pack-for-tesla-model-3-y-x-s-4-pack-ble-plug-and-play","title":"B-Qtech TPMS Tire Pressure Sensor Pack for Tesla Model 3\/Y\/X\/S — 4-Pack BLE, Plug-and-Play","description":"\u003cstrong\u003eB-Qtech TPMS Sensor pack replaces Tesla’s factory tire pressure sensors with four direct-fit BLE units that require no programming and feed live pressure and temperature data to compatible Model 3, Y, X and S vehicles.\u003c\/strong\u003e\n\n\u003cp\u003eThis four-piece B-Qtech TPMS sensor set is built specifically for Tesla vehicles (Model 3, Model Y, Model X, and Model S for the stated years) and mirrors OEM dimensions and communication behavior so the car recognizes the sensors after mounting. The sensors use Bluetooth Low Energy (BLE) and an Infineon SP490 chip for stable transmission, long battery life and operation across a wide temperature range. Each sensor ships ready to install, minimizing installation time and eliminating manual programming steps.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors install and pair with my Tesla?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: mount each sensor onto the wheel valve stem as you would an OEM unit and torque to spec. Once the wheel is installed and the vehicle is started, the Tesla system recognizes the sensor automatically—no manual coding or TPMS tool is required for compatible model years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement matching OEM part numbers for a plug-and-play fit\u003c\/li\u003e\n  \u003cli\u003eNo external programming tool or dealer visit needed for supported Tesla years\u003c\/li\u003e\n  \u003cli\u003eDesigned to seat and seal like factory sensors for reliable operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accuracy and durability can I expect from B-Qtech TPMS sensors?\u003c\/h3\u003e\n\u003cp\u003eThese sensors use the Infineon SP490 chipset and BLE RF mode to deliver stable, low-latency tire pressure and temperature readings. The design emphasizes long-term endurance with a battery life rated for over eight years under normal use and an operating temperature range that tolerates extreme climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth Low Energy for efficient, consistent data transfer\u003c\/li\u003e\n  \u003cli\u003eBattery life estimated at more than 8 years under typical conditions\u003c\/li\u003e\n  \u003cli\u003eRated operating temperature from -40 °F to 257 °F for all-weather monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these sensors work with my Tesla model and OEM part numbers?\u003c\/h3\u003e\n\u003cp\u003eB-Qtech sensors are manufactured to match Tesla’s proprietary specifications and list compatible part numbers so you can confirm fitment before purchase. They are specifically compatible with Model 3 and Model Y (October 2020–present), Model X (October 2021–present), and Model S (June 2021–present); check your vehicle’s build date to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with part numbers: 1490701-00-B, 1490701-01-B, 1490701-01-C and related OEM codes\u003c\/li\u003e\n  \u003cli\u003eConfirm vehicle model year ranges prior to ordering to guarantee direct compatibility\u003c\/li\u003e\n  \u003cli\u003eOEM-quality dimensions and BLE behavior for reliable system recognition\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This B-Qtech four-pack is intended for Tesla owners who need an exact-fit TPMS replacement without dealer programming—drivers who value quick installation, long battery life, and consistent tire data displayed in their vehicle. It suits DIY installers, independent shops, and fleet managers maintaining Model 3, Y, X, or S vehicles within the listed production years. For any issues, B-Qtech offers a one-year warranty and responsive after-sales support to help diagnose faults and arrange replacements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors need programming after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—these B-Qtech sensors are designed for compatible Tesla years to pair automatically once mounted, so no separate programming is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty covers the TPMS sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: B-Qtech provides a full 12-month warranty with support responses within 24 hours for sensor issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"B-Qtech","offers":[{"title":"Default Title","offer_id":67584849707193,"sku":"B0D78XHW2Z","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/b-qtech-tpms-front-packaging.jpg?v=1790456366"},{"product_id":"zycapatp-tpms-sensor-for-tesla-model-3-y-s-x-2020-2025-pre-programmed-2-4ghz-bluetooth-cr2450-battery","title":"ZYCAPATP TPMS Sensor for Tesla Model 3\/Y\/S\/X (2020–2025) — Pre‑programmed 2.4GHz Bluetooth, CR2450 Battery","description":"\u003cp\u003e\u003cstrong\u003eZYCAPATP TPMS Sensor is a direct-fit, pre-programmed tire pressure monitoring replacement made to restore accurate tire pressure and temperature reporting for 2020–2025 Tesla Model 3, Y, S and X vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a factory TPMS light appears or an OEM sensor fails, swapping in a compatible, reliable sensor gets your vehicle communicating correct tire data again. This ZYCAPATP sensor uses a 2.4 GHz Bluetooth chip and CR2450 cell to deliver steady readings, long battery life and a plug-and-play installation approach designed specifically to match Tesla OE part numbers for Model 3, Model Y, Model S and Model X from 2020 through 2025.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor match Tesla factory systems?\u003c\/h3\u003e\n\u003cp\u003eThe ZYCAPATP TPMS sensor is engineered to the same mounting and signal expectations as several official Tesla OE part numbers, so it behaves like the original sensor in the vehicle network. It is pre-programmed for Tesla models listed and requires no external programming tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2021–2025 Model 3, Model Y, Model S, Model X\u003c\/li\u003e\n  \u003cli\u003eMatches OE numbers such as 1472547G and 1490701-series\u003c\/li\u003e\n  \u003cli\u003ePre-programmed to simplify replacement—no dealer coding needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat accuracy and data updates can I expect while driving?\u003c\/h3\u003e\n\u003cp\u003eThe sensor reports tire pressure and temperature in real time via a 2.4 GHz Bluetooth connection to the vehicle. Pressure accuracy is around ±0.72–0.75 psi, giving more actionable readings than a worn or failing factory sensor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time pressure and temperature uploads to the Tesla system\u003c\/li\u003e\n  \u003cli\u003ePressure accuracy approximately ±0.72–0.75 psi\u003c\/li\u003e\n  \u003cli\u003eStable signal frequency at 2.4 GHz for consistent updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and does it require tools or coding?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward—remove the old valve-mounted sensor and install the ZYCAPATP unit in its place. The sensor arrives pre-programmed for supported Tesla models, so you normally only need the vehicle's built-in TPMS relearn or troubleshooting routine to complete activation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play replacement—no external programmer required\u003c\/li\u003e\n  \u003cli\u003eUse Tesla’s on-screen troubleshooting\/relearn to activate\u003c\/li\u003e\n  \u003cli\u003eStandard valve stem hardware for direct swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat about battery life and operating conditions?\u003c\/h3\u003e\n\u003cp\u003eEach sensor uses a CR2450 button battery and efficient chip design to deliver a long service life, with an expected minimum of five years under normal use. Components are specified to operate across wide temperature extremes for dependable readings in hot or cold climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCR2450 battery with a typical 5-year lifespan\u003c\/li\u003e\n  \u003cli\u003eRated to function from -40°C to 125°C\u003c\/li\u003e\n  \u003cli\u003eDesigned chip stability to preserve accuracy over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who own a 2020–2025 Tesla Model 3, Model Y, Model S or Model X and need an OEM-compatible TPMS replacement without dealer programming will find this sensor appropriate. It’s also a good option for technicians and fleet managers who want consistent, accurate tire data and a straightforward swap-in installation. ZYCAPATP includes a 12-month warranty and lifetime technical support to assist with installation and any post-sale questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this sensor work on my 2020 Tesla Model Y?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—it's made for 2021–2025 Model Y and compatible with many 2020–2025 Model variants; check OE number match for certainty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools or dealer coding to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required; replace the sensor and use the vehicle’s built-in TPMS relearn\/troubleshooting to activate.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ZYCAPATP","offers":[{"title":"Default Title","offer_id":67584867827897,"sku":"B0GYCM58VS","price":188.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/zycapatp-tpms-front-view.jpg?v=1790456970"},{"product_id":"lippert-components-tire-linc-pro-rv-tire-pressure-temperature-monitoring-system-4-tire-bundle-with-external-stem-sensors-repe","title":"Lippert Components Tire Linc PRO RV Tire Pressure \u0026 Temperature Monitoring System — 4-Tire Bundle with External Stem Sensors, Repe","description":"\u003cp\u003e\u003cstrong\u003eLippert Tire Linc PRO is a real-time RV tire pressure and temperature monitoring system that delivers live alerts for four tires using external stem sensors, a repeater, and a dock.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhether you’re towing across states or parked at a campground, Tire Linc PRO continuously watches tire pressure and temperature so you can respond to issues before they become emergencies. The system pairs with Apple CarPlay and Android Auto to display live readings on your vehicle screen, conserves power when parked, and expands easily if you add more tires or a trailer. Built by Lippert Components, this bundle balances fast installation, reliable wireless reporting, and straightforward integration for modern RV setups.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Tire Linc PRO keep my RV safer on long trips?\u003c\/h3\u003e\n\u003cp\u003eTire Linc PRO monitors pressure and temperature for four tires and issues instant alerts when readings fall outside safe ranges. By spotting leaks, overheating, or sudden pressure drops early, the system gives you time to inspect or stop for repairs before a blowout or roadside failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContinuous monitoring of each tire’s PSI and temperature\u003c\/li\u003e\n  \u003cli\u003eImmediate alerts sent to your dash via CarPlay\/Android Auto\u003c\/li\u003e\n  \u003cli\u003eExternal stem sensors for straightforward installation and clear readings\u003c\/li\u003e\n  \u003cli\u003eRepeater included to boost signal across large RVs or multi-vehicle setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat devices and displays will show tire data from Tire Linc PRO?\u003c\/h3\u003e\n\u003cp\u003eThe system integrates with Apple CarPlay and Android Auto, allowing live tire metrics to appear on compatible in-dash screens. The dock and repeater ensure the sensors communicate reliably, and the app provides a mobile interface for checking status when you’re away from the vehicle screen.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Apple CarPlay and Android Auto dashboards\u003c\/li\u003e\n  \u003cli\u003eMobile app support for on-the-go checks and settings\u003c\/li\u003e\n  \u003cli\u003eDock establishes a stable data link for continuous updates\u003c\/li\u003e\n  \u003cli\u003eRepeater improves connectivity for larger RVs and trailers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and expansion for more tires or a towed vehicle?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed for fast setup: external stem sensors thread onto your valve stems and the dock plugs into your RV system. If you add more tires or hook up a trailer, you can expand the network with extra sensors without replacing the base unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExternal stem sensors install without disassembling wheels\u003c\/li\u003e\n  \u003cli\u003eDock and repeater simplify wiring and signal reach\u003c\/li\u003e\n  \u003cli\u003eModular design supports additional sensors for trailers or extra axles\u003c\/li\u003e\n  \u003cli\u003eNo special tools required for routine installation and expansion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Tire Linc PRO drain my RV battery while parked?\u003c\/h3\u003e\n\u003cp\u003eThe system includes power-saving logic that reduces reporting frequency when the RV is stationary to avoid unnecessary drain. Sensors remain ready to resume full monitoring when you start driving, balancing safety with battery conservation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic reduced-reporting when parked to save power\u003c\/li\u003e\n  \u003cli\u003eFull monitoring resumes as you drive without manual steps\u003c\/li\u003e\n  \u003cli\u003eEnergy-efficient wireless sensors and repeater operation\u003c\/li\u003e\n  \u003cli\u003eDesigned for extended storage periods and long trips alike\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Lippert Tire Linc PRO is suited to RV owners who want continuous, dashboard-integrated tire monitoring for safety and convenience. It’s ideal for long-distance travelers, seasonal campers, and owners of large motorhomes or towable setups who need a scalable TPMS solution that is simple to install, integrates with modern infotainment systems, and minimizes battery impact while parked.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I add sensors for a trailer or extra axles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Tire Linc PRO supports additional sensors so you can expand monitoring to trailers or more tires without changing the base unit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it work with Apple CarPlay and Android Auto?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The system integrates with both Apple CarPlay and Android Auto to display live tire pressure and temperature on your dash.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Lippert Components","offers":[{"title":"Default Title","offer_id":67584867926201,"sku":"B0FNQ9NSKN","price":630.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lippert-tire-linc-pro-front-view.jpg?v=1790456972"},{"product_id":"smart-sensor-tpms-replacement-sensors-10-pack-tpm17-43041-multi-frequency-programmable-oem-style-units","title":"SMART SENSOR TPMS Replacement Sensors 10-Pack (TPM17-43041) — Multi‑Frequency Programmable OEM-Style Units","description":"\u003cp\u003e\u003cstrong\u003eSMART SENSOR 10 Pack TPMS 17-43041 are replacement multi-frequency tire pressure monitoring sensors compatible with a wide range of vehicles, sold as a set of ten for fleet or multi-wheel needs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 10-pack of SMART SENSOR TPMS units (model TPM17-43041, also referenced as 17-43011 or 17-4301) offers spare or replacement sensors designed to work across multiple frequencies and protocols. These sensors are intended for mechanics, fleets, and DIY installers who need reliable, ready-to-program TPMS modules to restore or expand tire pressure monitoring systems. The set includes ten sealed sensor bodies built to OEM-style form factors and includes the standard valve stem assembly to fit many passenger vehicles and light trucks.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these SMART SENSOR TPMS units work with?\u003c\/h3\u003e\n\n\u003cp\u003eThese sensors are multi-frequency and designed to match numerous OE and aftermarket TPMS protocols. Compatibility depends on the vehicle’s TPMS frequency and sensor ID programming method; many European, Asian, and North American models are supported when programmed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-frequency design supports common 315 MHz and 433 MHz systems.\u003c\/li\u003e\n  \u003cli\u003eFits many passenger cars and light trucks with snap-in valve stems.\u003c\/li\u003e\n  \u003cli\u003eProgrammable with most TPMS tools to clone or learn sensor IDs.\u003c\/li\u003e\n  \u003cli\u003eOften used to replace lost, damaged, or corroded OEM sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and program a SMART SENSOR 17-43041?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows standard TPMS replacement steps: remove the tire, dismount the old sensor from the rim, install the SMART SENSOR unit with a compatible valve stem and torque to spec, then program or relearn the sensor ID to the vehicle. Professional TPMS tools or dealer-level scan tools are typically required for programming and relearn procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount sensor to rim using standard valve hardware and correct torque.\u003c\/li\u003e\n  \u003cli\u003eReinstall tire and balance as needed before driving.\u003c\/li\u003e\n  \u003cli\u003eUse a TPMS activation or programming tool to write or clone the ID.\u003c\/li\u003e\n  \u003cli\u003eFollow the vehicle manufacturer’s relearn procedure to register sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical and performance features of these replacement sensors?\u003c\/h3\u003e\n\n\u003cp\u003eThe SMART SENSOR TPMS units are built with a sealed sensor housing and replaceable valve components to withstand road conditions. They are engineered for battery-powered RF transmission with a long lifespan typical for TPMS devices, but like all TPMS sensors they will eventually need replacement when battery or electronics fail.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDurable sealed housing to resist moisture and contaminants.\u003c\/li\u003e\n  \u003cli\u003eStandard valve stem design for snap-in or clamp-in rims (verify before purchase).\u003c\/li\u003e\n  \u003cli\u003eDesigned to transmit pressure and temperature data to the vehicle’s TPMS receiver.\u003c\/li\u003e\n  \u003cli\u003ePack of ten gives spare stock for fleets or multiple-vehicle shops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these sensors be used for fleet maintenance and bulk replacement?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the 10-pack format is tailored for fleet operators, repair shops, and installers who need multiple replacements in one order. Buying a multi-pack reduces downtime and ensures consistent sensor models across a fleet, simplifying programming and inventory.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTen sensors per pack for multi-wheel vehicles or multiple cars.\u003c\/li\u003e\n  \u003cli\u003eSimplifies inventory and helps standardize TPMS parts across a fleet.\u003c\/li\u003e\n  \u003cli\u003eCost-effective versus purchasing single sensors individually.\u003c\/li\u003e\n  \u003cli\u003eSupports rapid turnaround for scheduled maintenance or repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This 10-pack of SMART SENSOR TPMS 17-43041 units is designed for automotive shops, fleet managers, tire retailers, and do-it-yourself enthusiasts who require multiple replacement sensors at once. Choose this set when you need reliable, programmable TPMS hardware to replace failed sensors, outfit new wheels, or keep spare units on hand for fast service. Verify your vehicle’s TPMS frequency and relearn requirements before purchasing to ensure compatibility and a smooth installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these SMART SENSOR units compatible with 315 MHz and 433 MHz vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the TPM17-43041 is multi-frequency and supports common 315 MHz and 433 MHz systems when programmed correctly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a special tool to program these TPMS sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You’ll need a TPMS activation or programming tool or compatible dealer scanner to write or relearn the sensor IDs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SMART SENSOR","offers":[{"title":"Default Title","offer_id":67584869400761,"sku":"B07MGR64FH","price":409.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/smart-sensor-front-packaging.jpg?v=1790457031"},{"product_id":"tymate-rv-tire-pressure-monitoring-system-tm2-set-of-4-external-sensors-solar-lcd-monitor","title":"Tymate RV Tire Pressure Monitoring System TM2 — Set of 4 External Sensors, Solar LCD Monitor","description":"\u003cp\u003e\u003cstrong\u003eThe Tymate TM2 RV Tire Pressure Monitoring System is a solar-assisted TPMS with four pre-paired external sensors that continuously displays pressure and temperature for RVs, trailers, and tow vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep a constant eye on tire condition without guesswork: the TM2 combines long-life external sensors, a vibrant color LCD display, and multiple alarm modes to alert you to leaks, overpressure, high temperature, or sensor issues. The sensors arrive factory-paired to the monitor, are compact and waterproof, and the display supports solar charging plus USB\/cigarette-lighter backup for uninterrupted monitoring on long trips.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TM2 detect problems before they become dangerous?\u003c\/h3\u003e\n\u003cp\u003eThe TM2 offers six alarm types that trigger when preset thresholds or abnormal patterns appear, so you get early warnings for rapid leaks, high\/low pressure, excessive temperature, sensor low battery, and signal loss. Alarms are configurable relative to the reference pressure the system captures during pairing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast leak detection for sudden pressure drops\u003c\/li\u003e\n  \u003cli\u003eHigh\/low pressure alerts adjustable from +25% to -15% of reference\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature warnings to flag heat-related failures\u003c\/li\u003e\n  \u003cli\u003eSensor low voltage and signal-loss notifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the sensors last for long trips and rough conditions?\u003c\/h3\u003e\n\u003cp\u003eTymate TM2 sensors use CR1632 batteries and are optimized for low power draw, running up to six months on a single battery under normal use and with a rated life up to two years. They are IP67 waterproof and built to tolerate road vibration, making them suitable for RVs, trailers, and towing setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow power consumption for extended run time\u003c\/li\u003e\n  \u003cli\u003eIP67 waterproofing to resist water and dust\u003c\/li\u003e\n  \u003cli\u003eCompact, lightweight aluminum housings for durability\u003c\/li\u003e\n  \u003cli\u003eApproximately ±3 PSI accuracy for reliable readings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the display keep working when sunlight is limited?\u003c\/h3\u003e\n\u003cp\u003eThe TM2 monitor features automatic backlight control and a bright color LCD for easy night and day readability, plus three charging options to keep the unit powered. Solar charging maintains the display during daylight, and you can recharge via USB or a car cigarette-lighter port when solar input is insufficient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolar panel for automatic daytime charging\u003c\/li\u003e\n  \u003cli\u003eUSB port for convenient charging from power banks\u003c\/li\u003e\n  \u003cli\u003eCigarette-lighter charging option for vehicle-powered charging (adapter not included)\u003c\/li\u003e\n  \u003cli\u003eAdaptive backlight for visibility in changing light\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the TM2 monitor multiple tires and trailers at once?\u003c\/h3\u003e\n\u003cp\u003eThe TM2 system supports up to 10 tires when using the monitor’s front\/ trailer display swap, which covers dual rear axles or small trailers. For long trailers (total length ≥ 36 ft) or heavy towing where signal range may be challenged, Tymate recommends adding their repeater to ensure consistent communication.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonitors up to 10 tires in one system (switchable display)\u003c\/li\u003e\n  \u003cli\u003e433.92MHz transmission for stable signal performance\u003c\/li\u003e\n  \u003cli\u003eRecommended repeater for long trailers or poor signal conditions\u003c\/li\u003e\n  \u003cli\u003ePre-labeled, factory-paired sensors for instant setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: the Tymate TM2 is aimed at RV owners, travel trailer users, and drivers who tow pickups or caravans and want continuous, easy-to-read tire data. It suits people who need durable external sensors, straightforward installation, and flexible charging on extended trips, as well as fleet users or weekend RVers who prefer early, configurable alerts rather than guessing at tire problems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the TM2 sensors pre-paired to the display?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — all four sensors are factory-paired and pre-labeled, so the system is ready to use right out of the box.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the TM2 monitor both a vehicle and a trailer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the display can switch between vehicle and trailer views and supports monitoring up to 10 tires in one system.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Tymate","offers":[{"title":"Default Title","offer_id":67584879329465,"sku":"B0CW9GXBCB","price":167.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tymte-tm2-display-front-view.jpg?v=1790457357"},{"product_id":"tymate-rv-tire-pressure-monitoring-system-tm2-6-external-sensors-repeater-color-lcd-solar-usb-c","title":"Tymate RV Tire Pressure Monitoring System TM2 — 6 External Sensors + Repeater, Color LCD \u0026 Solar\/USB‑C","description":"\u003cp\u003e\u003cstrong\u003eThe Tymate TM2 RV Tire Pressure Monitoring System is a complete TPMS kit with a color display, six external sensors and a repeater\/booster to deliver continuous, real-time tire pressure and temperature data for RVs and trailers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for recreational vehicles, travel trailers and towing rigs, the Tymate TM2 package combines six rugged external sensors with an intuitive color LCD monitor and a range-extending repeater. Dual charging—solar on the unit plus USB‑C—keeps the display powered on long trips, while energy‑saving and vibration activation modes preserve battery life. The system supports monitoring up to ten tires when you swap between tow vehicle and trailer displays, and its sensors are built for outdoor conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will I know if a tire starts losing air?\u003c\/h3\u003e\n\u003cp\u003eThe TM2 notifies you immediately with configurable fast-leak alarms and pressure thresholds so you can act before a small problem becomes dangerous. Alarm types include high\/low pressure, rapid leak, high temperature and sensor low battery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast‑leak detection for sudden pressure drops\u003c\/li\u003e\n  \u003cli\u003eSet alarm range from +25% to -15% of reference pressure\u003c\/li\u003e\n  \u003cli\u003eVisual and audible alerts on the color LCD\u003c\/li\u003e\n  \u003cli\u003eSeparate low‑voltage warnings for each sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I keep the monitor powered on long cross‑country trips?\u003c\/h3\u003e\n\u003cp\u003eThe TM2 monitor supports dual charging: a built‑in solar panel that recharges the internal battery while parked or driving in daylight, and a USB‑C port for supplemental charging when sunlight is limited.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolar lithium battery panel provides passive charging\u003c\/li\u003e\n  \u003cli\u003eUSB‑C input for reliable wired charging when needed\u003c\/li\u003e\n  \u003cli\u003eAutomatic backlight adjustment for day\/night readability\u003c\/li\u003e\n  \u003cli\u003eEnergy‑saving mode powers down after idle and reawakens by vibration or key press\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these sensors reach my trailer when towing long distances?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a repeater\/booster to extend wireless range beyond 50 feet so trailer sensors remain connected even with long tow setups. For very long trailers (total length ≥36 ft), use the repeater to maintain stable data transmission.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRepeater included to expand coverage for trailer assemblies\u003c\/li\u003e\n  \u003cli\u003eSupports monitoring of up to ten tires (swap display between vehicle and trailer)\u003c\/li\u003e\n  \u003cli\u003eRecommended use of metal valve stems for sensor stability\u003c\/li\u003e\n  \u003cli\u003eSensors rated for dust, water and temperature exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow accurate and durable are the external sensors?\u003c\/h3\u003e\n\u003cp\u003eExternal sensors are compact, lightweight and rated to keep working in harsh outdoor conditions. They report pressure within approximately 3 PSI of accuracy and can run up to two years on their internal batteries under typical use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh sensing accuracy (error ≤3 PSI)\u003c\/li\u003e\n  \u003cli\u003eLow power consumption with up to 2 years battery life\u003c\/li\u003e\n  \u003cli\u003eWeather‑resistant design for wind, snow and water exposure\u003c\/li\u003e\n  \u003cli\u003eQuick, tool‑free mounting to valve stems (metal valve stem recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Tymate TM2 is built for RV owners, weekend campers, long‑haul tow vehicle operators and anyone who tows trailers or carries extra wheels. If you need continuous, easy‑to-read tire pressure and temperature monitoring across a tow setup—especially when trailers are long or seasonal travel makes battery life critical—the TM2 kit delivers a reliable, extendable solution that’s simple to install and designed for life on the road.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the TM2 monitor both my RV and trailer tires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The TM2 displays up to 10 tires by swapping between vehicle and trailer views; use the included repeater for long trailers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How is the monitor powered when camping off-grid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It charges via the built‑in solar panel and also accepts USB‑C charging as a reliable backup.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Tymate","offers":[{"title":"Default Title","offer_id":67584879427769,"sku":"B0CW9MR58L","price":375.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tymate-tm2-display-front.jpg?v=1790457358"},{"product_id":"tymate-tm3-rv-tire-pressure-monitoring-system-set-of-4-external-sensors-color-lcd-solar-usb-c-charging","title":"Tymate TM3 RV Tire Pressure Monitoring System — Set of 4 External Sensors, Color LCD \u0026 Solar\/USB-C Charging","description":"\u003cp\u003e\u003cstrong\u003eThe Tymate TM3 RV Tire Pressure Monitoring System is a four-sensor TPMS that gives continuous, real-time pressure and temperature monitoring with solar, USB-C and cigarette-lighter charging options.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for RVs, trailers and larger tow setups, the TM3 pairs four pre-labeled external sensors with a color LCD monitor to track pressures from 0–144 PSI. The sensors are factory-paired for quick installation, IP67 waterproof rated, and engineered for low power draw so each CR1632 battery can last months. The monitor’s adaptive backlight and bright screen make readings easy to see day or night, while multiple alarm modes alert you to fast leaks, over- or under-inflation, high temperature, low sensor voltage, or signal loss.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will I know if a tire is losing pressure?\u003c\/h3\u003e\n\u003cp\u003eThe TM3 includes rapid leak detection and configurable high\/low pressure alerts so you get notified as soon as conditions change. The system can automatically use the current pressure as a baseline and set alert thresholds within a range from +25% to -15% of that reference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSix alarm modes: rapid leak, high\/low pressure, high temp, low sensor voltage, signal loss.\u003c\/li\u003e\n  \u003cli\u003eAuto-reference setup uses current tire pressure as the baseline.\u003c\/li\u003e\n  \u003cli\u003eAlert range adjustable from +25% to -15% of reference pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the sensors durable and easy to install?\u003c\/h3\u003e\n\u003cp\u003eThe TM3 uses compact external sensors that are IP67-rated for water and dust resistance and ship pre-paired and labeled to eliminate pairing hassles. Each sensor uses a CR1632 battery with low-power circuitry; typical operation is up to six months on a single battery, with sensor life up to two years under normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExternal, lightweight sensors with factory labeling and pairing.\u003c\/li\u003e\n  \u003cli\u003eIP67 waterproof rating for wet and dusty conditions.\u003c\/li\u003e\n  \u003cli\u003eBattery: CR1632, long-run design — typical months per battery, up to two-year sensor lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat power and display features does the monitor offer?\u003c\/h3\u003e\n\u003cp\u003eThe display has a vivid color LCD with automatic backlight that adapts to ambient light, improving readability in bright sun or at night. For power, the monitor supports solar charging for continuous top-ups, plus USB-C charging and optional 12V cigarette-lighter input, so you won’t lose coverage on long trips or in low-sun areas.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdaptive automatic backlight and a high-contrast color LCD for clear readings.\u003c\/li\u003e\n  \u003cli\u003eSolar panel for everyday topping-up and longer runtime.\u003c\/li\u003e\n  \u003cli\u003eUSB-C and cigarette-lighter charging options for flexible power sources.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan it monitor trailers or more than four tires?\u003c\/h3\u003e\n\u003cp\u003eYes — the TM3 supports monitoring up to 10 tires in a single system and can swap display focus between the tow vehicle and trailer. For very long trailers (total length ≥36 ft) a Tymate repeater is recommended to maintain signal strength throughout the rig.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonitor supports up to 10 tire sensors in one system.\u003c\/li\u003e\n  \u003cli\u003eDisplay can toggle between vehicle and trailer tire groups.\u003c\/li\u003e\n  \u003cli\u003eUse an optional Tymate repeater for long trailers to ensure reliable signals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Tymate TM3 is aimed at RV owners, travel-trailer enthusiasts, and people who regularly tow larger loads and want continuous tire data without fuss. It’s best if you plan to mount sensors on metal valve stems for optimal stability, want a plug-and-play setup with factory-paired sensors, and value a monitor that stays readable in changing light and powered by solar plus USB-C on long trips.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the sensors need pairing before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, all four sensors arrive pre-labeled and factory-paired with the monitor for quick installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the monitor run without sunlight?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the monitor supports USB-C and cigarette-lighter charging in addition to solar charging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Tymate","offers":[{"title":"Default Title","offer_id":67584893878457,"sku":"B0DBZMD698","price":177.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tymate-tm3-front-display.jpg?v=1790457999"},{"product_id":"autel-ts508wf-tpms-programming-tool-2026-wi-fi-handheld-mx-sensor-programming-obd-relearns","title":"Autel TS508WF TPMS Programming Tool — 2026 Wi‑Fi Handheld, MX‑Sensor Programming \u0026 OBD Relearns","description":"\u003cp\u003e\u003cstrong\u003eThe Autel TS508WF is a 2026 WiFi-enabled TPMS programming and diagnostic tool that activates, programs Autel MX-sensors, performs OBD relearns, and receives lifetime updates for broad vehicle coverage.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as Autel's next-generation non-tablet TPMS solution, the TS508WF combines sensor activation, programming, relearn procedures and TPMS-related OBD2 diagnostics into a handheld unit that updates over WiFi. It adds faster workflows with Quick and Advanced service modes, supports Autel MX-sensor programming in four different ways, and stores diagnostic data for review or printing. Before ordering, confirm vehicle compatibility by sending your VIN to Autelonline@outlook.com.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TS508WF simplify TPMS sensor programming?\u003c\/h3\u003e\n\n\u003cp\u003eThe TS508WF puts Autel MX-sensor programming in your hands without visiting a dealer. It supports multiple programming methods so you can choose the fastest option for your workflow and sensor quantity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCopy by OBD for direct ECU writing (feature not available on some older Autel tools).\u003c\/li\u003e\n  \u003cli\u003eAuto-create 1–16 sensors at once for rapid bulk programming (average 6–8 seconds per sensor).\u003c\/li\u003e\n  \u003cli\u003eCopy via sensor activation when scanning live transmissions.\u003c\/li\u003e\n  \u003cli\u003eManual input of sensor IDs when required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich TPMS services and diagnostics can I run with this unit?\u003c\/h3\u003e\n\n\u003cp\u003eTS508WF performs comprehensive TPMS work: it locates sensor IDs, reads tire pressure and temperature, reports battery and frequency, and handles TPMS DTCs. It also offers multiple relearn methods to write sensor IDs to the vehicle.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSensor activation and reading of ID, pressure, temperature, battery level, and frequency.\u003c\/li\u003e\n  \u003cli\u003eStationary, Automatic, and OBD relearn options depending on vehicle make and model.\u003c\/li\u003e\n  \u003cli\u003eRead and clear TPMS fault codes and reset TPMS warning lights.\u003c\/li\u003e\n  \u003cli\u003eData review and printing for records or shop documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the 2026 WiFi version different from older Autel tools?\u003c\/h3\u003e\n\n\u003cp\u003eThis WiFi edition eliminates the need for a PC to download updates and introduces lifetime free updates delivered over the network. It also includes two service modes—Quick and Advanced—to adapt to simple or complex TPMS jobs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLifetime free software updates via WiFi or USB to add vehicle coverage and features.\u003c\/li\u003e\n  \u003cli\u003eQuick Mode for fast repairs, Advanced Mode for detailed diagnostics and programming.\u003c\/li\u003e\n  \u003cli\u003eImproved model coverage through frequent firmware releases to diagnose newer vehicles.\u003c\/li\u003e\n  \u003cli\u003eMulti-language support and assistance available by contacting Autelonline@outlook.com.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the TS508WF program any sensor brand?\u003c\/h3\u003e\n\n\u003cp\u003eThe TS508WF is built to program Autel MX-series sensors only. It can activate most OEM and aftermarket sensors for data reading but will not program sensors from other manufacturers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrograms Autel MX-sensors at both 433 MHz and 315 MHz exclusively.\u003c\/li\u003e\n  \u003cli\u003eActivates nearly all known TPMS sensors on the market for data reading.\u003c\/li\u003e\n  \u003cli\u003eDoes not support programming other-brand sensors—check compatibility first.\u003c\/li\u003e\n  \u003cli\u003eContact Autelonline@outlook.com with your VIN for a compatibility check before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Automotive technicians, mobile tire shops, fleet managers and experienced DIYers who need a portable, frequently updated TPMS service tool will benefit from the TS508WF. It's especially useful where Autel MX-sensor programming, OBD relearn capability, and routine TPMS diagnostics are required. Confirm vehicle compatibility by sending your VIN to Autelonline@outlook.com before buying, and avoid purchasing from unauthorized sellers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the TS508WF update without a PC?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 2026 TS508WF supports lifetime firmware updates over WiFi, no PC required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it program non-Autel sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — TS508WF programs only Autel MX-series sensors; it can activate but not program other brands.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67584902201529,"sku":"B00VZYFYKG","price":426.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-ts508wf-front-view.jpg?v=1790458355"},{"product_id":"xtra-seal-smart-sensor-tpms-snap-in-universal-sensor-box-of-10-multi-frequency-programmable-for-wide-vehicle-coverage","title":"Xtra-Seal Smart Sensor TPMS snap-in universal sensor — Box of 10, multi-frequency programmable for wide vehicle coverage","description":"\u003cp\u003e\u003cstrong\u003eThe Xtra-Seal Smart Sensor 17-43041 is a snap-in, multi-frequency programmable TPMS sensor sold in a box of 10 that fits the majority of late-model vehicles for fast, universal tire pressure monitoring replacement.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you run a repair shop, vehicle fleet, or keep a well-stocked parts room, this 10-pack of Xtra-Seal Smart Sensor 17-43041 offers broad vehicle coverage and on-the-fly programmability to simplify TPMS service. Designed as a truly universal snap-in sensor, it eliminates the need for large inventories of model-specific sensors and speeds up service time with multi-frequency capability and straightforward programming.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor cover so many vehicle makes and models?\u003c\/h3\u003e\n\u003cp\u003eThe Smart Sensor 17-43041 supports multiple RF frequencies and a wide range of programmed IDs, allowing it to emulate original-equipment TPMS units across many brands. Its universal programming options make it compatible with most vehicles that accept snap-in sensor form factors.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e95% vehicle application coverage as indicated by the manufacturer.\u003c\/li\u003e\n  \u003cli\u003eMulti-frequency RF support to match OE transmissions.\u003c\/li\u003e\n  \u003cli\u003eProgrammable ID profiles to mimic various OEM sensors.\u003c\/li\u003e\n  \u003cli\u003eSnap-in hardware that fits common valve stem bore sizes and wheel types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the Smart Sensor speed up TPMS service in a shop?\u003c\/h3\u003e\n\u003cp\u003eUsing a universal sensor reduces the number of part lookups and the time spent matching a vehicle to a specific OEM sensor. Technicians can program and install a sensor quickly, cutting service times and minimizing vehicle downtime.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePack of 10 sensors reduces reordering frequency and downtime.\u003c\/li\u003e\n  \u003cli\u003eProgrammable at the bench or on the vehicle with common TPMS tools.\u003c\/li\u003e\n  \u003cli\u003eSnap-in installation eliminates valve core and stem replacement complexity.\u003c\/li\u003e\n  \u003cli\u003eLess inventory means faster parts selection for common repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do I need to program and install these sensors?\u003c\/h3\u003e\n\u003cp\u003eThese sensors require a compatible TPMS programming\/scanning tool that supports multi-frequency universal sensors. Installation is standard snap-in: remove the tire, install the sensor into the valve hole, torque appropriately, and then program or relearn the sensor ID to the vehicle.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible TPMS programmer or dealership-level scan tool for ID writing.\u003c\/li\u003e\n  \u003cli\u003eBasic tire service equipment to demount\/remount and balance wheels.\u003c\/li\u003e\n  \u003cli\u003eTorque tool for valve nut installation per wheel manufacturer specs.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific relearn procedures after programming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill a box of 10 sensors help manage parts and costs?\u003c\/h3\u003e\n\u003cp\u003eBuying a 10-pack spreads the per-sensor cost and reduces the number of individual purchases and shipping events. For shops and fleets that perform regular TPMS service, bulk packaging lowers inventory complexity and total cost of ownership.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBulk quantity lowers per-unit cost versus single sensors.\u003c\/li\u003e\n  \u003cli\u003eMinimizes backorders and emergency part sourcing for common repairs.\u003c\/li\u003e\n  \u003cli\u003eConsolidates inventory by replacing multiple OEM-specific SKUs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Xtra-Seal Smart Sensor 17-43041 (Box of 10) is aimed at professional tire shops, independent repair facilities, fleet maintenance operations, and automotive parts resellers that need a reliable, universal snap-in TPMS sensor to streamline repairs and reduce inventory. It’s also a practical choice for DIY enthusiasts who service multiple vehicles and value the convenience of a programmable, multi-frequency replacement sensor.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this sensor compatible with my vehicle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Smart Sensor covers about 95% of applications; check your vehicle’s TPMS frequency and consult a programming tool to confirm compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to program the sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—use a TPMS-compatible programmer or scan tool that supports multi-frequency universal sensor programming.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Xtra-Seal","offers":[{"title":"Default Title","offer_id":67584904560825,"sku":"B07HSXKF41","price":399.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/xtraseal-front-box-packaging.jpg?v=1790458483"},{"product_id":"autel-tpms-sensor-kit-set-of-4-mx-sensor-315-433mhz-dual-frequency-universal-with-interchangeable-valve-stems","title":"Autel TPMS Sensor Kit, Set of 4 — MX-Sensor 315\/433MHz Dual-Frequency, Universal with Interchangeable Valve Stems","description":"\u003cstrong\u003eAutel MX-Sensor Set of 4 is a universal, dual-frequency TPMS sensor kit (315\/433MHz) with interchangeable rubber and metal valve stems designed for easy programming, cloning, and broad vehicle compatibility.\u003c\/strong\u003e\n\n\u003cp\u003eThese Autel TPMS sensors combine pre-programmed IDs, strong wireless transmission, and a press-in valve design to serve as a one-sensor-fits-most solution for tire pressure monitoring system replacement and service. Built to work with Autel TPMS programming tools, the MX-Sensor aims to cut inventory complexity for shops and DIYers while offering OE-like fit and long battery life.\u003c\/p\u003e\n\n\u003ch3\u003eHow do Autel MX-Sensors simplify sensor replacement?\u003c\/h3\u003e\n\u003cp\u003eAutel’s MX-Sensor is engineered to replace most OE sensors with a single SKU. The sensor arrives ready for programming or cloning and uses a press-in valve system for fast installation, reducing downtime at the shop or in the driveway.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-programmed and 100% cloneable to original sensor IDs\u003c\/li\u003e\n  \u003cli\u003ePress-in interchangeable rubber and metal valve stems for quick swaps\u003c\/li\u003e\n  \u003cli\u003eOne model supports a large percentage of TPMS-equipped vehicles\u003c\/li\u003e\n  \u003cli\u003eDesigned to fit like OE for proper sealing and tire fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and regions are supported by these TPMS sensors?\u003c\/h3\u003e\n\u003cp\u003eThe MX-Sensor covers an extensive list of makes and models worldwide and is compatible with vehicles across North America, Europe, and Asia. This wide compatibility helps shops keep fewer part numbers in stock while servicing a broad customer base.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with 150+ brands and more than 15,000 models globally\u003c\/li\u003e\n  \u003cli\u003eCompatible with Ford, GM, BMW, VW, Toyota, Honda, Nissan and many others\u003c\/li\u003e\n  \u003cli\u003eIdeal for multi-brand repair shops and DIYers working on varied vehicles\u003c\/li\u003e\n  \u003cli\u003eContact Autel support to verify fitment for specific vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these sensors programmed and activated?\u003c\/h3\u003e\n\u003cp\u003eMX-Sensors are intended to be used with Autel TPMS programming tools for reliable activation and wireless setup. They support batch programming and strong radio transmission so programming can often be completed even after sensors are mounted in the wheel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to work with Autel TPMS tools (TS408S, TS501PRO, TS508WF, TS601, ITS600, ITS600PRO, etc.)\u003c\/li\u003e\n  \u003cli\u003eBatch-program up to 20 sensors simultaneously to save time\u003c\/li\u003e\n  \u003cli\u003eStrong wireless signal enables programming post-installation\u003c\/li\u003e\n  \u003cli\u003eCloning preserves original sensor ID so no relearn may be needed in many cases\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and performance can you expect?\u003c\/h3\u003e\n\u003cp\u003eAutel MX-Sensors meet SAE J1205\/J1206 standards for environmental resistance and are built for long-term performance. Lightweight construction and an automotive-grade battery provide stable behavior and service life comparable to OE parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSAE-tested for heat, cold, and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eAutomotive-grade battery rated for 6+ years of service life\u003c\/li\u003e\n  \u003cli\u003eEach sensor weighs about 11 g for minimal unsprung mass impact\u003c\/li\u003e\n  \u003cli\u003e24-month or 24,000-mile limited coverage against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Autel MX-Sensor Set of 4 is aimed at automotive technicians, mobile tire shops, garage owners, and well-equipped DIYers who need a flexible, inventory-friendly TPMS solution. It’s particularly useful where multiple vehicle makes are serviced, where quick turnaround is important, or when shops already use Autel diagnostic and TPMS tools. For first-time setup or compatibility checks, reach out to Autel support to confirm suitability for specific vehicles and to get help with programming best practices.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Autel MX-Sensors need special tools to program?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. MX-Sensors are designed for programming with Autel TPMS tools for reliable activation, batch programming, and cloning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do the MX-Sensor batteries last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The MX-Sensor uses an automotive-grade battery rated for about 6+ years of typical service life.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67584912785593,"sku":"B0FSZ9YWDW","price":234.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-mx-sensor-front-packaging.jpg?v=1790458811"},{"product_id":"richeer-bluetooth-tpms-tire-pressure-sensors-for-tesla-model-3-y-s-x-2021-2026-4-pack-pre-programmed-long-life-battery","title":"Richeer Bluetooth TPMS Tire Pressure Sensors for Tesla Model 3\/Y\/S\/X (2021–2026) — 4-Pack, Pre‑Programmed, Long‑Life Battery","description":"\u003cp\u003e\u003cstrong\u003eRicheer 4 PCS Upgraded Bluetooth TPMS Sensor kit provides pre-programmed, real-time tire pressure and temperature monitoring for Tesla Model 3, Model Y, Model S and Model X (2021–2026), with extended-life batteries and simple vehicle activation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep on-road safety insights visible without complicated setup: this set of four Richeer Bluetooth TPMS sensors is designed specifically to communicate with Tesla vehicles from 2021 onward. Each sensor ships pre-programmed to match the OEM signaling for Model 3\/Y (2021–present) and Model S\/X (2022–present), reducing installation steps. Built with an upgraded 2.4GHz Bluetooth chip and a long-lasting battery, the sensors offer reliable readings in extreme temperatures and wet conditions. The package includes OEM cross-reference numbers for easy compatibility checks and a one-year warranty backed by Richeer customer support.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors connect to my Tesla and do they need coding?\u003c\/h3\u003e\n\n\u003cp\u003eThese sensors use an upgraded 2.4GHz Bluetooth chip to transmit pressure and temperature data to your vehicle. They arrive pre-programmed for the supported Tesla models, so no dealer-level coding is required—activation is done through the car’s built-in troubleshooter or tire settings menu.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-programmed for Model 3\/Y (2021–present) and Model S\/X (2022–present)\u003c\/li\u003e\n  \u003cli\u003eActivate via Tesla’s onboard tire pressure troubleshooting\/scan\u003c\/li\u003e\n  \u003cli\u003e2.4GHz Bluetooth ensures stable, low-latency updates\u003c\/li\u003e\n  \u003cli\u003eNo special tools or dealer visit needed for most installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect in extreme weather and how long do batteries last?\u003c\/h3\u003e\n\n\u003cp\u003eRicheer sensors are rated to operate from -40°F to 257°F (-40°C to +125°C), and their power management extends service life. The internal battery is designed to last over eight years under normal driving conditions, helping reduce replacements and maintenance events.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature range supports winter, summer and high-heat environments\u003c\/li\u003e\n  \u003cli\u003eEnergy-efficient design lowers battery drain by about 30%\u003c\/li\u003e\n  \u003cli\u003eLong-life battery—designed for 8+ years of service\u003c\/li\u003e\n  \u003cli\u003eConsistent readings in rain, snow and humid conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these match my vehicle’s OEM TPMS numbers and fit the valve hardware?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit is engineered to match the signaling and fitment used by Tesla for the listed years and includes cross-reference OEM numbers for verification. The sensors are compatible with the valve interfaces found on Model 3\/Y and Model S\/X from their respective model years.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OEM numbers: 1490701-01-B, 1490701-01-C, 1490701-00-B and others\u003c\/li\u003e\n  \u003cli\u003eDesigned for seamless integration with factory tire pressure monitoring\u003c\/li\u003e\n  \u003cli\u003ePhysical valve fitment matches Tesla TPMS mounting standards\u003c\/li\u003e\n  \u003cli\u003eReduces risk of false alerts when properly installed and activated\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat support and warranty does Richeer provide if a sensor fails?\u003c\/h3\u003e\n\n\u003cp\u003eRicheer includes a one-year warranty and responsive customer service to help diagnose issues or replace defective units. If a sensor stops functioning within the warranty period, contact support for troubleshooting and a timely resolution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty on defects and premature failures\u003c\/li\u003e\n  \u003cli\u003eCustomer support promise with typical responses within 24 hours\u003c\/li\u003e\n  \u003cli\u003eSimple RMA or replacement process if a covered fault is confirmed\u003c\/li\u003e\n  \u003cli\u003eInstallation guidance available from Richeer support team\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers of Tesla Model 3 and Model Y (2021–present) or Model S and Model X (2022–present) who want a direct-fit, pre-programmed TPMS upgrade that minimizes setup, provides consistent readings in harsh climates, and reduces ongoing battery replacements. It’s also a good option for fleet owners and DIY installers who prefer OEM-compatible numbers and a clear warranty process.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors require professional programming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. They come pre-programmed for supported Tesla models and activate via the vehicle’s built-in troubleshooter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do the sensor batteries typically last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Batteries are designed for over eight years under normal driving, thanks to energy-efficient components.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Richeer","offers":[{"title":"Default Title","offer_id":67584915013817,"sku":"B0F6BZQBW6","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/richeer-front-packaging-tpms-kit.jpg?v=1790458933"},{"product_id":"autel-mx-sensor-universal-tpms-sensors-4-pack-315-433-mhz-dual-band-programmable","title":"Autel MX-Sensor Universal TPMS Sensors 4-Pack 315\/433 MHz Dual‑Band Programmable","description":"\u003cp\u003e\u003cstrong\u003eAutel MX-Sensor is a programmable, universal TPMS sensor (dual-band 315\/433 MHz) that replaces OE sensors across most passenger cars and must be activated with Autel TPMS tools before installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Autel MX-Sensors arrive as a 4-pack of universal tire pressure monitoring sensors engineered to simplify inventory, speed up shop workflows, and deliver OEM-comparable performance. Each sensor supports both 315 MHz and 433 MHz frequencies, accepts rubber or metal valve stems, and is designed to be programmed or cloned exclusively with Autel TPMS programming tools. Backed by a 2-year warranty and a 3-month replacement window, the MX-Sensor line aims to provide durable battery life, dependable signals, and flexible programming for high-volume garages and parts distributors.\u003c\/p\u003e\n\n\u003ch3\u003eHow do Autel MX-Sensors fit most vehicles?\u003c\/h3\u003e\n\u003cp\u003eThe MX-Sensor uses a single SKU that supports 98% of TPMS-equipped passenger cars across American, Asian, and European makes by offering dual-band frequency coverage and interchangeable valve options. That wide compatibility reduces the need to stock many OE-specific sensors, saving space and capital.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-band 315\/433 MHz design to match common OE frequencies.\u003c\/li\u003e\n  \u003cli\u003eInterchangeable rubber and metal valve stems for direct replacement.\u003c\/li\u003e\n  \u003cli\u003eCovers mainstream makes including Chevrolet, Toyota, Honda, BMW, and VW.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Bluetooth-based TPMS (some EVs) or heavy commercial vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat programming steps are required before installation?\u003c\/h3\u003e\n\u003cp\u003eAutel MX-Sensors must be programmed and activated using official Autel TPMS tools (wireless programming supported) to complete the matching process. Sensors can be cloned from original IDs or freshly programmed; wireless batch programming accelerates high-volume jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProgram or clone only with Autel TS408S, TS508WF, TS501 PRO, ITS600, TS900, or compatible scanners listed in documentation.\u003c\/li\u003e\n  \u003cli\u003eSupports wireless programming and batch setup (up to 20 sensors with compatible tools).\u003c\/li\u003e\n  \u003cli\u003eCloning maintains original sensor ID so no relearn is required when installed in the same position.\u003c\/li\u003e\n  \u003cli\u003eKeep old sensors at least 50 m away during setup to avoid signal interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable and durable are these replacement sensors?\u003c\/h3\u003e\n\u003cp\u003eAutel MX-Sensors are built to meet SAE J1205\/J1206 testing standards and use an updated chip for faster transmission and stronger signals. They are lightweight for stable performance, designed to match OEM battery life, and come with serial tracking for quality control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTested to SAE industry standards for TPMS quality and durability.\u003c\/li\u003e\n  \u003cli\u003eImproved chip for faster data transmission and stronger wireless signal.\u003c\/li\u003e\n  \u003cli\u003eLightweight construction (approx. 11 g) for consistent sensor stability.\u003c\/li\u003e\n  \u003cli\u003e2-year warranty and a 3-month free replacement policy included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should a repair shop know about stocking and servicing with MX-Sensors?\u003c\/h3\u003e\n\u003cp\u003eBecause one MX-Sensor SKU replaces the majority of OE sensors, shops can reduce inventory complexity and free up capital while still offering OE-like performance. Autel’s tools enable unlimited reprogramming so sensors are reusable and won’t expire after a single use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne SKU covers most passenger vehicles—less inventory, fewer part numbers.\u003c\/li\u003e\n  \u003cli\u003eUnlimited reprogramming reduces waste and repeat purchases.\u003c\/li\u003e\n  \u003cli\u003eBatch wireless programming saves shop time during peak service periods.\u003c\/li\u003e\n  \u003cli\u003eTechnical support and programming help available via the seller contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Autel MX-Sensor 4-packs are ideal for automotive repair shops, tire centers, and parts distributors that need a single, flexible TPMS solution to replace many OE variants. They also suit DIY mechanics who own or have access to Autel TPMS programming tools and want reliable, reusable sensors that reduce repeat inventory spending. Note: purchase only if you will program with Autel-compatible tools; these sensors are not compatible with third-party programming devices or Bluetooth-only TPMS systems found on some EVs and commercial vehicles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Autel MX-Sensors work with any TPMS tool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. MX-Sensors must be programmed with official Autel TPMS tools; third-party tools are not supported.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reuse or reprogram these sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They support unlimited reprogramming and can be cloned to reuse without expiration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67584923238585,"sku":"B07FTLX2L4","price":234.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-mx-sensor-front-packing.jpg?v=1790459292"},{"product_id":"autel-tpms-mx-sensor-set-of-4-2-in-1-315-433mhz-press-in-sensors-pre-programmed-cloneable","title":"Autel TPMS MX-Sensor Set of 4 — 2-in-1 315\/433MHz Press-In Sensors, Pre-Programmed \u0026 Cloneable","description":"\u003cp\u003e\u003cstrong\u003eAutel MX-Sensor set of four are pre-programmed, 2-in-1 press-in TPMS sensors that support both 315MHz and 433MHz systems and replace most OE sensors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Autel MX-Sensors combine dual-frequency compatibility, interchangeable valves, and cloneable programming into a single lightweight sensor to simplify tire-shop inventory and speed replacements. Each sensor arrives pre-set and can be programmed or cloned with Autel TPMS tools, letting technicians restore TPMS functionality quickly across a wide range of makes and models without carrying large stock of individual OE-specific sensors.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and countries do these Autel MX-Sensors fit?\u003c\/h3\u003e\n\u003cp\u003eThe MX-Sensor is engineered to cover the vast majority of passenger and light-duty vehicles globally. It works across domestic, European, and Asian vehicle lines and supports both 315MHz and 433MHz frequencies used by different markets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatibility with 150+ brands and over 10,000 vehicle applications.\u003c\/li\u003e\n  \u003cli\u003eCovers major U.S. lines (Ford, GM, Chrysler, etc.) and many EU brands (BMW, VW, Porsche, etc.).\u003c\/li\u003e\n  \u003cli\u003eOne sensor type reduces the need for multiple OE-specific SKUs.\u003c\/li\u003e\n  \u003cli\u003ePre-programmed and cloneable for fast fitment to most cars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I program or clone Autel MX-Sensors?\u003c\/h3\u003e\n\u003cp\u003eAutel MX-Sensors must be programmed or cloned with an Autel TPMS tool; third-party TPMS scanners cannot program these sensors. When cloning, the sensor copies the original sensor ID so no relearn is required when installed in the same position.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse Autel tools such as TS508, TS608, MX808S-TS, MX900TS, and similar compatible models.\u003c\/li\u003e\n  \u003cli\u003eTools can program multiple sensors at once—saving shop time when replacing several sensors.\u003c\/li\u003e\n  \u003cli\u003eKeep the programming MX-sensor at least 50 meters (164 ft) from the original sensor to avoid interference.\u003c\/li\u003e\n  \u003cli\u003eUpdate TPMS tool software to the latest version before programming for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical features and installation details of the press-in MX-Sensor?\u003c\/h3\u003e\n\u003cp\u003eThe MX-Sensor uses a press-in design with interchangeable metal and rubber valve stems so a single sensor adapts to most wheel types. Its lightweight construction and long-life battery make it durable for multi-year service while matching OE form factors for straightforward fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes two valve options (metal and rubber) that are easy to swap without extra parts.\u003c\/li\u003e\n  \u003cli\u003ePress-in mounting mirrors many original equipment sensors for fast shop installation.\u003c\/li\u003e\n  \u003cli\u003eSensor weight about 11 g for minimal added rotating mass.\u003c\/li\u003e\n  \u003cli\u003eReads tire pressure, temperature, battery level, and sensor ID accurately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long do Autel MX-Sensors last and what warranty\/support is included?\u003c\/h3\u003e\n\u003cp\u003eAutel designs MX-Sensors for several years of service and backs them with a warranty and technical support to help shops and vehicle owners. Sensors are tested to SAE industry standards and shipped with a limited warranty against manufacturing defects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExpected service life of approximately 4–6 years under normal use.\u003c\/li\u003e\n  \u003cli\u003eTested to SAE J1205\/J1206 performance standards for TPMS sensors.\u003c\/li\u003e\n  \u003cli\u003e24-month (or 24,000-mile) limited warranty against manufacturing defects.\u003c\/li\u003e\n  \u003cli\u003eAutel provides technical support via the seller’s contact email for programming or installation help.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Autel MX-Sensors are ideal for automotive repair shops, tire retailers, and fleet managers who want to minimize inventory complexity while supporting a broad set of vehicles. They are also suitable for DIYers with an Autel TPMS programming tool who need a reliable, dual-frequency, pre-programmed sensor that’s easy to install and clone to original sensor IDs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I program Autel MX-Sensors with non-Autel TPMS tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Autel MX-Sensors require Autel TPMS tools for programming and cloning; third-party scanners cannot program them.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What should I do if cloning fails or the sensor won't program?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Ensure tool firmware is updated and keep the MX-Sensor at least 50 meters from the original sensor; contact Autel support if issues persist.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67584941490361,"sku":"B0DLKQGCWV","price":234.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-mx-sensor-set-front-packaging.jpg?v=1790460116"},{"product_id":"fobo-bike-2-wireless-tire-pressure-monitor-black-bluetooth-5-0-real-time-app-alerts","title":"FOBO Bike 2 Wireless Tire Pressure Monitor (Black) — Bluetooth 5.0, Real‑Time App Alerts","description":"\u003cb\u003eFOBO Bike 2 TPMS is a Bluetooth 5.0 wireless tire pressure monitoring system that gives motorcyclists continuous, real-time pressure and temperature readings through the FOBO app.\u003c\/b\u003e\n\n\u003cp\u003eIf you ride a motorcycle regularly, knowing your tire pressure and temperature at a glance reduces surprises and helps you plan maintenance. FOBO Bike 2 pairs directly with iOS and Android devices using Bluetooth 5.0, so you can track both tires without installing an external receiver. The compact black sensors screw onto valve stems for a simple DIY setup and push alerts to your phone when readings stray from safe ranges.\u003c\/p\u003e\n\n\u003ch3\u003eHow does FOBO Bike 2 improve everyday riding awareness?\u003c\/h3\u003e\n\u003cp\u003eThe system runs continuous monitoring while you ride or when the bike is parked nearby, delivering instant push notifications for low pressure, rapid leaks, or abnormal temperatures. Because it logs data to the cloud, you can review trends and spot slow leaks before they become a roadside problem.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time pressure and temperature updates for both tires.\u003c\/li\u003e\n  \u003cli\u003ePush alerts for low\/high pressure, slow\/fast leaks, and temperature spikes.\u003c\/li\u003e\n  \u003cli\u003eCloud sync stores historical readouts and shares with contacts.\u003c\/li\u003e\n  \u003cli\u003eBluetooth 5.0 ensures stable, low-power connectivity with modern phones.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation really DIY and what devices is it compatible with?\u003c\/h3\u003e\n\u003cp\u003eYes—installation is a straightforward screw-on replacement for standard valve caps, and there’s no separate receiver required. After fitting the sensors, download the FOBO app, pair each sensor using Bluetooth, and configure pressure thresholds for your bike model.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTool-free sensor attachment to existing valve stems.\u003c\/li\u003e\n  \u003cli\u003ePairing via FOBO app on iOS and Android devices.\u003c\/li\u003e\n  \u003cli\u003eManage multiple bikes from one account for quick switching.\u003c\/li\u003e\n  \u003cli\u003eNo extra hardware or wiring needed—ideal for quick setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat alerts and data management features can I expect?\u003c\/h3\u003e\n\u003cp\u003eFOBO Bike 2 sends immediate alerts for pressure and temperature anomalies and keeps a timeline of readings in the cloud. You can customize notification thresholds, invite friends or family to monitor a profile, and access past sessions to analyze tire behavior over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCustomizable alert thresholds for pressure and temperature.\u003c\/li\u003e\n  \u003cli\u003eAutomatic cloud backup of sensor data and activity logs.\u003c\/li\u003e\n  \u003cli\u003eShareable bike profiles for group rides or caretakers.\u003c\/li\u003e\n  \u003cli\u003eHistorical charts help detect gradual pressure loss or recurring issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long do the sensors last and how are they maintained?\u003c\/h3\u003e\n\u003cp\u003eFOBO Bike 2 sensors are designed for long-term wireless use with energy-efficient Bluetooth 5.0; battery life depends on usage and reporting frequency. They are weather-resistant and require only occasional checks for physical tightness and battery replacement when the app indicates low battery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnergy-efficient Bluetooth minimizes battery drain during continuous monitoring.\u003c\/li\u003e\n  \u003cli\u003eWeather-resistant construction suited for routine road use.\u003c\/li\u003e\n  \u003cli\u003eApp alerts notify you when sensor battery replacement is needed.\u003c\/li\u003e\n  \u003cli\u003eSimple valve-cap profile makes removal and servicing easy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: FOBO Bike 2 TPMS (Black) is built for motorcyclists who want a low-effort, accurate way to monitor tire pressure and temperature using their phone. It suits daily commuters, sport riders, touring enthusiasts, and anyone who prefers preventive maintenance over emergency repairs. If you value easy installation, cloud history, and reliable Bluetooth connectivity without adding bulky hardware, FOBO Bike 2 is a practical upgrade to your bike’s safety toolkit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does FOBO Bike 2 work with any motorcycle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, FOBO Bike 2 fits standard valve stems and is compatible with most motorcycles; check the FOBO app for bike-specific pressure settings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need an external receiver to use it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No external receiver is required—sensors pair directly with your iOS or Android device via Bluetooth 5.0.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FOBO","offers":[{"title":"Default Title","offer_id":67584942768313,"sku":"B07Q21RNNB","price":227.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/fobo-bike-2-front-view-black.jpg?v=1790460220"},{"product_id":"guta-trailer-tpms-gt20-with-10-cap-sensors-and-repeater-long-range-monitor-color-display","title":"GUTA Trailer TPMS GT20 with 10 Cap Sensors and Repeater — Long-Range Monitor, Color Display","description":"\u003cp\u003e\u003cstrong\u003eThe GUTA GT20 Trailer Tire Pressure Monitoring System is a 10-sensor TPMS with a long-range signal booster and large color display to monitor pressure and temperature across trailers, RVs, and multi-axle trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe GT20 brings continuous, factory-paired monitoring for up to 24 tires with ten included cap sensors and a repeater for extended range. Designed for long-haul travel, multi-vehicle fleets, and recreational towing, this system reports real-time PSI and temperature readings, alerts you to abnormal conditions, and stores customizable alarm thresholds to match your load and driving style.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the GT20 keep trailers and RVs safer on the road?\u003c\/h3\u003e\n\u003cp\u003eThe GT20 tracks both tire pressure (0–188 PSI) and temperature (-40°F to 221°F), so you can see developing issues before they escalate. When a sensor detects rapid pressure loss, high temperature, or values outside your set thresholds, the monitor issues audible and visual warnings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time pressure and temperature readouts for each tire\u003c\/li\u003e\n  \u003cli\u003eSix alert modes including rapid air loss and abnormal temperature\u003c\/li\u003e\n  \u003cli\u003eCustom alarm thresholds from +25% to -15% relative to reference pressure\u003c\/li\u003e\n  \u003cli\u003ePre-labeled, pre-paired sensors for immediate use after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the GT20 reliable for larger vehicles and long distances?\u003c\/h3\u003e\n\u003cp\u003eEvery GT20 kit (except the four-sensor bundle) includes a signal booster\/repeater that extends communication up to about 100 feet, improving reception across long trailers or multi-axle rigs. The monitor itself has a rechargeable battery with power-saving features to keep the display running through long trips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSignal booster placed centrally for consistent reception\u003c\/li\u003e\n  \u003cli\u003eMonitor battery lasts up to 15 hours under heavy use and auto-sleeps after 15 minutes of no motion\u003c\/li\u003e\n  \u003cli\u003eLarge color LCD with adjustable orientation and backlight for day\/night visibility\u003c\/li\u003e\n  \u003cli\u003eWorks for RVs, trailers, trucks, and semi-trailers with up to 24 tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and daily operation?\u003c\/h3\u003e\n\u003cp\u003eSensors come pre-labeled and factory-paired to the monitor, so installation mainly involves fitting cap sensors and placing the repeater. The system sets current pressure as the reference automatically after installation, letting you fine-tune alarms without complicated pairing steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-paired cap sensors save setup time—no manual pairing required\u003c\/li\u003e\n  \u003cli\u003eAutomatic reference pressure capture simplifies threshold configuration\u003c\/li\u003e\n  \u003cli\u003eSwitchable units: PSI\/BAR and °F\/°C to match your preference\u003c\/li\u003e\n  \u003cli\u003eStep-by-step manual and online video guides included for support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and placement tips help the GT20 perform best?\u003c\/h3\u003e\n\u003cp\u003eFor steady performance, GUTA recommends installing cap sensors on metal valve stems and positioning the repeater in an open central location away from large metal panels. Sensors are battery powered; the monitor also notifies you of low sensor and monitor battery status.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse metal valve stems for the cap-type sensors for best signal and durability\u003c\/li\u003e\n  \u003cli\u003eMount the repeater near the trailer’s midpoint in an unobstructed area\u003c\/li\u003e\n  \u003cli\u003eReplace sensor batteries when low-battery alerts appear to maintain continuous monitoring\u003c\/li\u003e\n  \u003cli\u003eKeep the monitor charged and use the power-saving mode to extend runtime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? The GUTA GT20 is aimed at owners and operators of RVs, travel trailers, horse trailers, box trucks, and commercial rigs that need comprehensive, long-range tire status across many axles. It’s also suited for fleet managers who want centralized, on-the-road visibility into tire conditions and drivers who tow heavy loads or travel long distances and want an easy-to-read, customizable TPMS solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the GT20 monitor more than ten tires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. With the included monitor and booster the GT20 supports up to 24 tires; the kit ships with ten sensors and can be expanded using additional compatible sensors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the sensors need to be paired to the monitor before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Sensors are pre-labeled and factory-paired, so the system begins reporting after installation and the monitor sets current pressure as the reference automatically.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GUTA","offers":[{"title":"Default Title","offer_id":67584943620281,"sku":"B0CW9KB4X6","price":709.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/guta-gt20-front-display.jpg?v=1790460271"},{"product_id":"guta-gt20-trailer-tpms-tire-pressure-temperature-monitor-4-sensors-long-range-repeater","title":"GUTA GT20 Trailer TPMS Tire Pressure \u0026 Temperature Monitor — 4 Sensors, Long‑Range Repeater","description":"\u003cp\u003e\u003cstrong\u003eThe GUTA GT20 Trailer TPMS is a long-range tire pressure and temperature monitoring system with four external sensors and a signal booster option to keep trailers, RVs, and trucks safer on the road.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you tow a travel trailer, operate a fleet truck, or drive a motorhome, the GT20 gives continuous, at-a-glance readings of tire pressure and temperature while you travel. The system pairs pre-labeled sensors with a color LCD monitor, supports customizable alarm thresholds, and includes a repeater for extended signal reach—helpful when monitoring multiple axles or large vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the GT20 help prevent tire problems while towing?\u003c\/h3\u003e\n\u003cp\u003eThe GT20 constantly checks each sensor’s pressure and temperature, alerting you early if conditions drift outside your set limits. Early notification helps you address slow leaks, overheating, or underinflation before they lead to roadside breakdowns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time monitoring of 0–188 PSI and -40°F to 221°F temperature range\u003c\/li\u003e\n  \u003cli\u003eSix alarm modes including rapid air loss and abnormal temperature\u003c\/li\u003e\n  \u003cli\u003eCustom alarm thresholds from +25% to -15% of reference pressure\u003c\/li\u003e\n  \u003cli\u003eImmediate setup: sensors arrive pre-paired with the monitor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the GT20 keep working on large trailers or multi-axle rigs?\u003c\/h3\u003e\n\u003cp\u003eYes—GUTA designed the system for extended coverage. The included signal booster (on kits that contain it) increases transmission distance, and the monitor can track up to 24 tires, making it suitable for large RVs, trailers, and commercial vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSignal booster extends range up to about 100 feet for reliable reception\u003c\/li\u003e\n  \u003cli\u003eSupports monitoring of up to 24 sensors for full-vehicle coverage\u003c\/li\u003e\n  \u003cli\u003eRepeater placement instructions help avoid signal blockage by metal panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and daily use of the GT20?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: metal valve-stem cap sensors screw on and come pre-labeled and factory-paired so the monitor displays data right away. The monitor features a large color screen with adjustable orientation and backlight, and it conserves battery by entering sleep mode when the vehicle is stationary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-paired sensors eliminate manual pairing steps\u003c\/li\u003e\n  \u003cli\u003eSet pressure unit (PSI\/BAR) and temperature unit (°F\/°C)\u003c\/li\u003e\n  \u003cli\u003eRechargeable monitor battery lasts up to ~15 hours under heavy use\u003c\/li\u003e\n  \u003cli\u003ePower-saving mode activates after 15 minutes of no motion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance or setup tips should I know before buying?\u003c\/h3\u003e\n\u003cp\u003eTo ensure reliable readings, GUTA recommends installing the metal cap sensors on metal valve stems rather than rubber stems, and placing the repeater centrally on the trailer in an open area away from large metal panels. Periodic sensor battery checks and following the included step-by-step guide videos will help maintain consistent performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse metal valve stems for best sensor performance; rubber stems not recommended\u003c\/li\u003e\n  \u003cli\u003eMount the repeater near the trailer’s midpoint in an unobstructed area\u003c\/li\u003e\n  \u003cli\u003eReplace sensors when low-battery warnings appear to avoid data gaps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The GUTA GT20 is built for RV owners, trailer tow drivers, and commercial fleet operators who need dependable, continuous tire monitoring across multiple axles. If you tow long distances, manage a multi-axle vehicle, or want pro-level alerts to prevent tire-related delays, the GT20’s long-range signal, customizable alarms, and easy setup make it a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many tires can the GT20 monitor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The GT20 supports up to 24 tires when using compatible sensors and repeater units, covering multi-axle trailers and fleet vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the sensors require pairing before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Sensors come pre-labeled and pre-paired with the monitor, so they display data immediately after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GUTA","offers":[{"title":"Default Title","offer_id":67584943685817,"sku":"B0CW998285","price":375.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/guta-gt20-front-monitor-display.jpg?v=1790460271"},{"product_id":"schrader-tpms-solutions-programmable-ez-sensor-tpms-sensor-4-pack-multi-frequency-oe-equivalent","title":"Schrader TPMS Solutions programmable EZ-Sensor TPMS sensor 4-pack — multi-frequency, OE-equivalent","description":"\u003cp\u003e\u003cstrong\u003eSchrader 33500 EZ-Sensor® is a programmable TPMS sensor four-pack that replaces OE sensors after being configured with a compatible tool and installed by a trained technician.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Schrader EZ-Sensor 33500 is a multi-frequency, programmable tire pressure monitoring sensor engineered to match original equipment performance once properly programmed and installed. It consolidates several radio frequencies into one serviceable unit, reducing inventory complexity for shops while delivering OE-equivalent functionality such as auto-locate and reliable pressure and temperature reporting. Because the sensor requires programming with the vehicle's year\/make\/model protocol before wheel installation, this product is intended for professional service environments equipped with up-to-date TPMS tools.\u003c\/p\u003e\n\n\u003ch3\u003eHow is the 33500 EZ-Sensor different from a standard replacement TPMS sensor?\u003c\/h3\u003e\n\u003cp\u003eThe 33500 is a universal programmable sensor that supports multiple RF protocols (314.9, 315, and 433 MHz) in a single SKU. Rather than stocking separate frequency-specific sensors, technicians program the EZ-Sensor to the vehicle’s protocol so it behaves like the original sensor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-frequency design covers common OE protocols\u003c\/li\u003e\n  \u003cli\u003eProgrammable to vehicle-specific calibrations and ID codes\u003c\/li\u003e\n  \u003cli\u003eReplicates OE features including auto-locate technology\u003c\/li\u003e\n  \u003cli\u003eManufactured to OEM quality standards for consistent operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the installation and programming requirements?\u003c\/h3\u003e\n\u003cp\u003eThis product is not a DIY item and must be programmed and installed by a trained technician using a compatible TPMS programming tool with current software. Programming must be completed with the vehicle’s year\/make\/model protocol before the sensor is mounted in the wheel and before the relearn procedure is performed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProgram sensor with a compatible TPMS tool and the correct vehicle protocol\u003c\/li\u003e\n  \u003cli\u003eInstall the programmed sensor into the wheel rim\u003c\/li\u003e\n  \u003cli\u003eComplete the vehicle’s factory TPMS relearn or registration process\u003c\/li\u003e\n  \u003cli\u003eKeep TPMS tool software updated for maximum vehicle coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability specs should technicians expect?\u003c\/h3\u003e\n\u003cp\u003eOnce programmed, the EZ-Sensor operates like an OE sensor and meets Schrader’s quality requirements. It supports normal passenger vehicle speeds and pressures and uses specified torque values for valve core installation to ensure reliable sealing and service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum speed rating: 130 MPH\u003c\/li\u003e\n  \u003cli\u003eMaximum pressure rating: 80 PSI\u003c\/li\u003e\n  \u003cli\u003eValve core torque: 3.5 in-lbs\u003c\/li\u003e\n  \u003cli\u003eDesigned for long-term functionality and compatibility with evolving OE systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich tools and shops should handle the EZ-Sensor 33500?\u003c\/h3\u003e\n\u003cp\u003eOnly shops with compatible TPMS scan\/programming tools and trained technicians should program and fit the EZ-Sensor. Ensure the shop’s TPMS tool supports the vehicle protocol and has the latest firmware for correct programming and relearn procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible TPMS diagnostic and programming tools (check tool manufacturer's vehicle coverage list)\u003c\/li\u003e\n  \u003cli\u003eTechnicians trained in sensor programming and TPMS relearn procedures\u003c\/li\u003e\n  \u003cli\u003eProper wheel dismount\/mount equipment to avoid sensor damage\u003c\/li\u003e\n  \u003cli\u003eInventory management benefits from one SKU covering multiple frequencies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Schrader 33500 EZ-Sensor® 4-pack is intended for professional tire and service centers, fleet maintenance shops, and dealerships that need a single, programmable TPMS sensor covering multiple radio frequencies. If you operate with a compatible programming tool and trained technicians, the EZ-Sensor reduces stocking complexity while delivering OE-level performance after correct programming and relearn. Do not attempt installation or programming without the appropriate equipment and training.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I program and install the 33500 EZ-Sensor myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The 33500 must be programmed and installed by a trained technician using a compatible TPMS tool with current software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the EZ-Sensor cover multiple frequencies?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The EZ-Sensor supports 314.9, 315, and 433 MHz protocols when programmed to the vehicle.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Schrader TPMS Solutions","offers":[{"title":"Default Title","offer_id":67584954794169,"sku":"B0FS44ZT94","price":188.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/schrader-33500-ez-sensor-front-view.jpg?v=1790460825"},{"product_id":"xtool-tp150-tpms-programming-relearn-tool-handheld-315-433-mhz-scanner-with-lifetime-updates","title":"XTOOL TP150 TPMS Programming \u0026 Relearn Tool — Handheld 315\/433 MHz Scanner with Lifetime Updates","description":"\u003cp\u003e\u003cstrong\u003eThe XTOOL TP150 is a handheld TPMS programming and relearn tool that activates, diagnoses, resets warning lights, and programs compatible TPMS sensors (programming limited to XTOOL TS100 or pre‑programmed sensors).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe TP150 is designed to simplify tire pressure monitoring system (TPMS) service for both home mechanics and professional shops. It combines sensor activation, diagnostic reads, relearn procedures, DTC clearing, and programming functions into a compact device with a durable physical button interface and lifetime software updates. The tool supports most U.S., Asian, and European vehicles and offers multi‑language menus to suit global users.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TP150 help find and diagnose TPMS issues?\u003c\/h3\u003e\n\u003cp\u003eThe TP150 scans the vehicle’s TPMS network, shows live sensor data, and identifies faulty units so you can replace or repair only what’s necessary. It reads sensor IDs, pressure, temperature, battery level, frequency, and TPMS‑related DTC codes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal‑time sensor info: pressure, temp, battery status, frequency\u003c\/li\u003e\n  \u003cli\u003eReads and clears TPMS diagnostic trouble codes\u003c\/li\u003e\n  \u003cli\u003ePinpoints faulty sensors before replacement\u003c\/li\u003e\n  \u003cli\u003eStep‑by‑step prompts minimize guesswork\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the TP150 program or copy sensor IDs for my vehicle?\u003c\/h3\u003e\n\u003cp\u003eYes—TP150 supports programming and ID copying modes, but programming works only with XTOOL TS100 or sensors already pre‑programmed for XTOOL. The device offers multiple programming methods to speed installation and match almost all dual‑frequency sensors used on modern vehicles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour programming modes: auto ID generation, manual entry, copy via activation, copy via OBD\u003c\/li\u003e\n  \u003cli\u003eSupports dual frequencies (315 \u0026amp; 433 MHz) for broad vehicle coverage\u003c\/li\u003e\n  \u003cli\u003eNote: only programs XTOOL TS100 or pre‑programmed sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich relearn methods does the TP150 support and when should I use them?\u003c\/h3\u003e\n\u003cp\u003eThe TP150 includes Automatic, OBD, Stationary, and Copy Sensor relearn procedures to accommodate different vehicle makes and service situations. Choose the relearn mode based on the vehicle’s manufacturer recommendations or how you replaced or rotated tires.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic relearn for vehicles that support drive‑around relearn\u003c\/li\u003e\n  \u003cli\u003eOBD relearn to write IDs through the diagnostic port quickly\u003c\/li\u003e\n  \u003cli\u003eStationary relearn for parked relearn sequences\u003c\/li\u003e\n  \u003cli\u003eCopy sensors relearn when duplicating an existing sensor ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat ongoing support and compatibility can I expect?\u003c\/h3\u003e\n\u003cp\u003eXTOOL provides free lifetime updates via Wi‑Fi to keep the TP150 current with new models and protocols. Before purchasing or performing advanced operations, you can confirm vehicle coverage by sharing the VIN with support.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFree lifetime software updates via Wi‑Fi\u003c\/li\u003e\n  \u003cli\u003eMulti‑language menus and simple physical controls for workshop use\u003c\/li\u003e\n  \u003cli\u003eExtensive coverage: common Toyota, Ford, Audi, BMW, Honda, Mercedes, and more\u003c\/li\u003e\n  \u003cli\u003ePrompt technical support available using the device S\/N\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this tool is for: The XTOOL TP150 is aimed at DIYers who maintain their own vehicles, mobile technicians, and independent tire shops that handle many makes and models. It’s particularly useful for users who need fast TPMS scans, accurate sensor activation, multiple relearn methods, and the ability to program sensors compatible with XTOOL TS100. If you need full programming for non‑XTOOL sensors, check compatibility first or consider alternative programmers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the TP150 program any TPMS sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The TP150 programs only XTOOL TS100 or sensors pre‑prepared for XTOOL. It will activate and read many OEM\/universal sensors but programming is limited.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I keep the TP150 updated?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Connect the TP150 to Wi‑Fi and install free lifetime updates through XTOOL’s update utility to maintain vehicle coverage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"XTOOL","offers":[{"title":"Default Title","offer_id":67584955351225,"sku":"B09BZ67RSF","price":352.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/xtool-tp150-front-view.jpg?v=1790460879"},{"product_id":"gearwrench-tpms-programming-diagnostic-tool-gwtpms-4-color-display-dual-frequency-315-433-mhz","title":"GEARWRENCH TPMS Programming \u0026 Diagnostic Tool GWTPMS — 4\" Color Display, Dual‑Frequency 315\/433 MHz","description":"\u003cp\u003e\u003cstrong\u003eThe GEARWRENCH GWTPMS is a handheld universal TPMS programming and diagnostic tool that activates, programs, and relearns tire pressure sensors across most vehicles fast and accurately.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for technicians who need dependable, shop-ready performance, the GWTPMS combines broad sensor compatibility with an intuitive 4\" color display and wireless updates. It supports both 315 MHz and 433 MHz frequencies, reads sensor IDs and battery\/pressure data, clears codes, and programs GEARWRENCH-branded sensors. With free lifetime software updates and the ability to handle multiple sensors at once, the tool reduces diagnostic time and helps clear TPMS warnings quickly.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will the GWTPMS clear a TPMS warning light?\u003c\/h3\u003e\n\n\u003cp\u003eThe GWTPMS is engineered for speed: most common reads, activations, and relearns take only seconds once the sensor is located. Its clear menu structure and responsive sensor wake-up cut down trial-and-error, so shops move vehicles through service bays faster.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTypical sensor activation and read in seconds on compatible sensors\u003c\/li\u003e\n  \u003cli\u003eRelearn and program procedures simplified through the 4\" color interface\u003c\/li\u003e\n  \u003cli\u003eRead, clear, and confirm code resolution without repeated vehicle cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this tool work with my vehicle and sensors?\u003c\/h3\u003e\n\n\u003cp\u003eThe GWTPMS covers a wide range of makes and models thanks to dual-frequency support (315 MHz and 433 MHz) and dedicated compatibility with GEARWRENCH sensors. It reads sensor ID, pressure, temperature, and battery status so you can verify sensor health before programming or replacement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDual-frequency coverage to match nearly every global sensor\u003c\/li\u003e\n  \u003cli\u003eDisplays sensor ID, pressure, temperature, and battery level\u003c\/li\u003e\n  \u003cli\u003ePrograms all GEARWRENCH TPMS sensors and supports many OE sensor types\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat diagnostic and programming functions does the GWTPMS provide?\u003c\/h3\u003e\n\n\u003cp\u003eBeyond simple activation, the GWTPMS offers a suite of diagnostic tools: read and clear TPMS codes, check sensor parameters, and save time by programming up to eight sensors simultaneously. Wireless updates keep the unit current with new sensor IDs and procedures without visiting a service center.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRead and clear TPMS trouble codes quickly\u003c\/li\u003e\n  \u003cli\u003eCheck sensor position, ID, pressure, temperature, battery status\u003c\/li\u003e\n  \u003cli\u003eProgram multiple sensors at once to speed installations\u003c\/li\u003e\n  \u003cli\u003eReceive free lifetime software updates via wireless connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the GWTPMS fit into a busy shop workflow?\u003c\/h3\u003e\n\n\u003cp\u003eThe GWTPMS is designed to integrate into high-throughput environments: rugged enough for daily use, portable for quick moves between bays, and fast enough to reduce vehicle downtime. Its clear screen and guided menus lower training time so technicians of varying experience can operate it reliably.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePortable, durable design for shop and mobile service work\u003c\/li\u003e\n  \u003cli\u003eLarge 4\" color display for quick reading and guided steps\u003c\/li\u003e\n  \u003cli\u003eMinimizes vehicle hold time with rapid activation and programming\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The GEARWRENCH GWTPMS is aimed at automotive technicians, independent repair shops, tire centers, and fleet maintenance teams that demand fast, dependable TPMS diagnostics and programming. If you service a variety of vehicle makes, need dual-frequency coverage, or want seamless support for GEARWRENCH sensors with free lifetime updates, this tool streamlines TPMS work and helps keep vehicles on the road.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the GWTPMS support both 315 MHz and 433 MHz sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The GWTPMS supports dual-frequency operation for 315 MHz and 433 MHz sensors to cover most makes and models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are software updates included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The GWTPMS includes free lifetime wireless software updates to add sensor coverage and improvements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GEARWRENCH","offers":[{"title":"Default Title","offer_id":67584958365881,"sku":"B0GHZFXQR8","price":288.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gearwrench-gwtpms-front-view.jpg?v=1790461022"},{"product_id":"schrader-tpms-solutions-ez-sensor-programmable-tpms-sensor-12-pack-unprogrammed-oe-level-130-mph-80-psi","title":"Schrader TPMS Solutions EZ-Sensor Programmable TPMS Sensor 12-Pack — Unprogrammed, OE-Level 130 MPH\/80 PSI","description":"\u003cp\u003e\u003cstrong\u003eSchrader 33500 EZ-Sensor® is a programmable TPMS sensor sold as a 12-pack, designed to be configured by trained technicians to replace or update vehicle tire pressure monitoring systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Schrader 33500 EZ-Sensor® offers a flexible solution for garages and fleet shops that need blank, programmable tire pressure sensors that can be tailored to specific makes, models and model years. Supplied without an ID programmed, each sensor must be written with the correct vehicle data using a compatible TPMS programming tool and then installed and relearned per the vehicle manufacturer’s procedure. These sensors are built to meet OE-level specifications for pressure and speed ratings and are intended for professional installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I prepare and program the EZ-Sensor® for installation?\u003c\/h3\u003e\n\n\u003cp\u003eEach EZ-Sensor® comes unprogrammed and requires a compatible TPMS service tool and the latest software version. A trained technician will either generate a new sensor ID or clone the ID from an existing working sensor, then write the chosen ID and vehicle-specific parameters into the blank sensor before fitting it to the valve.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse a TPMS tool listed as compatible with Schrader EZ-Sensors.\u003c\/li\u003e\n  \u003cli\u003eKeep tool software up to date to support the latest vehicle models.\u003c\/li\u003e\n  \u003cli\u003eCreate a new ID or copy an existing sensor’s ID when applicable.\u003c\/li\u003e\n  \u003cli\u003eVerify programming success before installing the sensor on the wheel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat steps are required to install and relearn the sensor on the vehicle?\u003c\/h3\u003e\n\n\u003cp\u003eAfter programming, install the sensor assembly following torque specifications and industry-safe mounting practices. Perform the vehicle manufacturer’s specified TPMS relearn or initialization procedure so the vehicle recognizes the new sensor IDs; this step completes the replacement and restores proper TPMS function.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInstall the programmed sensor and tighten valve core to 3.5 in-lbs.\u003c\/li\u003e\n  \u003cli\u003eAdhere to the maximum pressure rating of 80 PSI during any testing.\u003c\/li\u003e\n  \u003cli\u003eUse the vehicle’s factory relearn process or a compatible scan tool to register sensors.\u003c\/li\u003e\n  \u003cli\u003eConfirm on-vehicle TPMS readings after relearn to ensure proper communication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and performance specs should I expect from these sensors?\u003c\/h3\u003e\n\n\u003cp\u003eSchrader designs the EZ-Sensor® to meet the demands of road use while accommodating current and evolving OE TPMS technologies. They support a maximum vehicle speed rating and pressure rating suitable for most light-duty applications and are engineered for long-term compatibility with incoming OE updates.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaximum speed rating: 130 MPH, suitable for highway driving.\u003c\/li\u003e\n  \u003cli\u003eMaximum pressure rating: 80 PSI, covers typical passenger and light-truck tire ranges.\u003c\/li\u003e\n  \u003cli\u003eValve core torque specification: 3.5 in-lbs for secure installation.\u003c\/li\u003e\n  \u003cli\u003eFuture-proofed for compatibility with new and pending OE TPMS features.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Schrader 33500 EZ-Sensor® 12-pack is aimed at professional tire shops, automotive service centers, and fleet maintenance teams that require blank, programmable TPMS sensors in bulk. Because these sensors must be programmed and installed by technicians with compatible equipment and the proper training, they are not intended for do-it-yourself customers. If you maintain multiple vehicles or need ready-to-program replacements for varied makes and model years, this 12-pack provides a cost-effective, OE-compatible solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I program and install the EZ-Sensor® myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These sensors require programming and installation by a trained technician using a compatible TPMS tool and updated software.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the maximum pressure and speed ratings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The EZ-Sensor® supports up to 80 PSI and a maximum speed rating of 130 MPH.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Schrader TPMS Solutions","offers":[{"title":"Default Title","offer_id":67584961085625,"sku":"B00TPW03CO","price":455.13,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/schrader-ez-sensor-front-packaging.jpg?v=1790461133"},{"product_id":"guta-gt80-rv-tire-pressure-monitoring-system-10-flow-through-sensors-vertical-color-touchscreen","title":"GUTA GT80 RV Tire Pressure Monitoring System — 10 Flow-Through Sensors, Vertical Color Touchscreen","description":"\u003cp\u003e\u003cstrong\u003eThe GUTA GT80 RV Tire Pressure Monitoring System is a full-featured TPMS with a vertical color touchscreen and ten flow-through sensors for real-time pressure and temperature monitoring across trailers, RVs, and tow vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for long hauls and large tow setups, the GT80 pairs a bright, easy-to-read display with compact flow-through sensors that let you inflate tires without removing them. The system supports up to 22 tires on one page, includes an optional signal booster for extended range, and comes factory-paired so setup is fast and tool-free. It emphasizes practical, road-ready features: configurable alarms, power-saving modes, and user-replaceable sensor batteries.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the GT80 keep tire information easy to read while driving?\u003c\/h3\u003e\n\u003cp\u003eThe GT80 uses a vertical full-color touchscreen designed for clear visibility from the driver’s seat in both daylight and nighttime conditions. Its interface combines touch input with audible feedback so you can confirm settings without distraction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLarge vertical LCD with bright color rendering for easy scanning\u003c\/li\u003e\n  \u003cli\u003eTouchscreen controls plus sound feedback for quick adjustments\u003c\/li\u003e\n  \u003cli\u003eReal-time numeric readout of pressure (0–188 PSI) and temperature\u003c\/li\u003e\n  \u003cli\u003eDisplays up to 22 tires on a single screen when configured\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I inflate my tires without removing the sensors?\u003c\/h3\u003e\n\u003cp\u003eYes — the included flow-through sensors are designed to allow tire inflation while staying installed on the valve stem, saving time during roadside maintenance or routine checks. They fit metal valve stems and are pre-labeled and paired at the factory for immediate use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlow-through design enables on-wheel inflation\u003c\/li\u003e\n  \u003cli\u003ePre-paired, labeled sensors reduce setup steps\u003c\/li\u003e\n  \u003cli\u003eCompact, lightweight housings minimize interference with tire service\u003c\/li\u003e\n  \u003cli\u003eCR2032 user-replaceable batteries for convenient upkeep\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat alerts and protections does the system provide?\u003c\/h3\u003e\n\u003cp\u003eThe GT80 offers six alarm modes to help you detect developing tire issues: high\/low pressure, high temperature, rapid leaks, missing sensor signals, and low sensor battery. Visual and audio alarms alert you immediately when readings cross preset thresholds so you can respond promptly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh- and low-pressure warnings to flag abnormal inflation\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature alerts to indicate heat-related stress\u003c\/li\u003e\n  \u003cli\u003eFast-leak detection and missing-sensor notifications for maintenance awareness\u003c\/li\u003e\n  \u003cli\u003eLow-battery alarms for each sensor to avoid unexpected outages\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow well does the GT80 work for large vehicles and fleets?\u003c\/h3\u003e\n\u003cp\u003eThe GT80 is built for RVs, trailers, tow vehicles, and multi-axle setups, with support for switching among vehicle types and monitoring many tires at once. A signal booster (included) expands reliable connectivity up to roughly 164 feet, making the system suitable for longer trailers and fleet applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports up to 22 tires visible on one page for multi-axle rigs\u003c\/li\u003e\n  \u003cli\u003eVehicle-type selection for quick configuration across different rigs\u003c\/li\u003e\n  \u003cli\u003eIncluded signal booster to extend wireless range and stability\u003c\/li\u003e\n  \u003cli\u003eFactory-paired sensors for streamlined fleet deployment and replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The GUTA GT80 suits RV owners, trailer operators, truck drivers, and fleet managers who need continuous, easy-to-read tire condition monitoring across multiple axles. If you value quick installation, the ability to inflate without removing sensors, and clear audible\/visual alerts for pressure and temperature deviations, the GT80 offers a practical combination of features for on‑road safety awareness and routine maintenance efficiency.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the GT80 sensors waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the flow-through sensors are designed to be waterproof and dustproof for outdoor use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need tools to install the GT80 sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, sensors are tool-free and come pre-paired and labeled for fast installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GUTA","offers":[{"title":"Default Title","offer_id":67584965771449,"sku":"B0DPM1N92R","price":905.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/guta-gt80-front-view-touchscreen.jpg?v=1790461289"},{"product_id":"guta-gt30-rv-trailer-tpms-10-sensor-monitor-for-multi-axle-trailers-188-psi-range-rechargeable-display","title":"GUTA GT30 RV \u0026 Trailer TPMS — 10-Sensor Monitor for Multi-Axle Trailers, 188 PSI Range, Rechargeable Display","description":"\u003cp\u003e\u003cstrong\u003eGUTA GT30 is a 10-sensor tire pressure monitoring system built for RVs, trailers, and large vehicles to display real-time pressure and temperature for up to 46 tires across multiple trailer sections.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe GUTA GT30 TPMS pairs a bright, rechargeable monitor with ten external metal-valve cap sensors designed for heavy-duty towing, long-haul RV travel, and multi-axle trailers. It continuously measures tire pressure (up to 188 psi) and temperature (up to 185 ℉), alerts you to abnormal conditions, and conserves power with smart sleep modes and replaceable sensor batteries. The system supports wireless programming, anti-theft sensor assignment, and optional signal boosting for extended range and interference-prone environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the GT30 keep my RV or trailer safe on long trips?\u003c\/h3\u003e\n\u003cp\u003eThe GT30 constantly monitors every paired tire and sounds visual and audible alerts when pressure or temperature moves outside your preset safety envelope. Fast leak detection and missing-sensor warnings help you identify issues early so you can stop and address them before they escalate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time display for up to 10 tires on one page, auto-switching between front, trailer, and rear sections\u003c\/li\u003e\n  \u003cli\u003eAlarms for high\/low pressure, high temperature, rapid leaks, missing signal, and low sensor battery\u003c\/li\u003e\n  \u003cli\u003ePressure range up to 188 psi and temperature range to 185 ℉ for heavy-duty tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install and set up the GUTA sensors without professional tools?\u003c\/h3\u003e\n\u003cp\u003eYes — the GT30 uses a wireless programming process that simplifies setup. You can assign and pre-program the anti-theft sensors before fitting them to metal valve stems, and the monitor will record current pressure as the reference point after pairing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo inflation-programming required during installation; pair sensors first\u003c\/li\u003e\n  \u003cli\u003eReference pressure auto-configures on first connection for easy alarm threshold setup\u003c\/li\u003e\n  \u003cli\u003eAlarm range adjustable from +25% to −15% of reference pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat about battery life and power management for long periods of storage or travel?\u003c\/h3\u003e\n\u003cp\u003eThe GT30 monitor has a built-in rechargeable lithium battery that supports extended use between charges, and the sensors use replaceable CR2032 cells rated up to four years under normal service. Power-saving features reduce drain when the vehicle is stationary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonitor charges in about 4 hours, then lasts roughly 12–14 days in active use\u003c\/li\u003e\n  \u003cli\u003eMonitor enters power-saving mode after 15 minutes without motion or vibration\u003c\/li\u003e\n  \u003cli\u003eSensors transmit status every 5 minutes while pressurized; CR2032 batteries are replaceable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the GT30 work reliably on long trailers or in interference-heavy environments?\u003c\/h3\u003e\n\u003cp\u003eThe system is designed for multi-axle setups and can display data from up to 46 tires through section switching, and you can add an optional signal booster to extend range through tough electromagnetic or distance challenges. Using the sensors on metal valve stems also improves signal reliability and mechanical stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisplay supports up to 46 tires by cycling between sections without button presses\u003c\/li\u003e\n  \u003cli\u003eOptional signal booster available to overcome distance and interference\u003c\/li\u003e\n  \u003cli\u003eManufacturer recommends metal valve stems for dependable sensor performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The GUTA GT30 suits RV owners, commercial tow operators, and anyone running multi-axle trailers who needs continuous, easy-to-read tire data across multiple sections. It’s ideal for long-distance travelers and freight haulers who want automated monitoring, audible and visual alarms, and replaceable sensor batteries for years of service. If you run heavy loads, tow complex trailer combinations, or need peace of mind on the highway, the GT30 is built to keep you informed and help protect your tires and fuel efficiency.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many tires can the GUTA GT30 monitor at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The display shows up to 10 tires per page and can cycle through sections to cover up to 46 tires total.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the sensors’ batteries replaceable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each sensor uses a replaceable CR2032 battery with an expected life up to four years in normal use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GUTA","offers":[{"title":"Default Title","offer_id":67584967671993,"sku":"B09STJXT9R","price":563.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/guta-gt30-front-display.jpg?v=1790461383"},{"product_id":"tireminder-brass-tpms-valve-cap-transmitters-2-pack-for-tmg400c-tm66-a1a-low-profile-cr1632","title":"TireMinder Brass TPMS Valve-Cap Transmitters 2-Pack for TMG400C\/TM66\/A1A — Low-Profile, CR1632","description":"\u003cp\u003e\u003cstrong\u003eTireMinder 2-Pack Brass Transmitters are compact replacement TPMS valve-cap sensors designed to restore wireless tire pressure monitoring for TMG400C, TM66 and A1A systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese two brass transmitters let you quickly replace worn or missing TPMS valve-cap sensors on vehicles that use brass or stainless steel valve stems. They are engineered as low-profile screw-on units that behave like ordinary valve caps while sending real-time pressure data to compatible TireMinder monitors. Each transmitter houses a user-replaceable CR1632 battery and weighs roughly 0.5 ounces, making them unobtrusive but durable additions to RVs, trailers, motorhomes, trucks, and passenger cars.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these transmitters work with my existing TireMinder system?\u003c\/h3\u003e\n\n\u003cp\u003eThe transmitters screw onto brass or steel valve stems and wirelessly broadcast tire pressure data to TireMinder receivers already paired with your system model (TMG400C, TM66 or A1A). They function as direct replacements for factory valve-cap sensors, requiring no additional adapters when used with compatible monitors.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with TireMinder TMG400C, TM66 and A1A monitors\u003c\/li\u003e\n  \u003cli\u003eScrews on like a standard valve cap for quick installation\u003c\/li\u003e\n  \u003cli\u003ePairs automatically when installed if previous sensor IDs match\u003c\/li\u003e\n  \u003cli\u003eOperates on a CR1632 coin cell with a typical 9–14 month life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from these valve-cap sensors?\u003c\/h3\u003e\n\n\u003cp\u003eThese transmitters are made to fit brass and stainless steel valve stems, with construction that resists everyday road vibration and weather. Their compact metal housing helps protect the internal electronics while keeping the unit light and unobtrusive.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for brass and steel valve stem applications\u003c\/li\u003e\n  \u003cli\u003eLow-profile metal body resists impacts and elements\u003c\/li\u003e\n  \u003cli\u003eApproximately 0.5 oz weight avoids affecting valve performance\u003c\/li\u003e\n  \u003cli\u003eReplaceable battery simplifies long-term maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and battery replacement?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward — remove your old valve cap or transmitter and screw the new TireMinder transmitter into place. When the battery runs low, open the housing to swap in a CR1632 coin cell; typical battery life is between 9 and 14 months depending on use and environmental factors.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTool-free install: hand-tighten onto a valve stem like a cap\u003c\/li\u003e\n  \u003cli\u003eBattery type: CR1632, widely available for easy replacement\u003c\/li\u003e\n  \u003cli\u003eLightweight design avoids the need for recalibration in most systems\u003c\/li\u003e\n  \u003cli\u003eIf pairing issues occur, consult your monitor’s re-learn or ID entry procedure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? These TireMinder brass transmitters suit owners of RVs, travel trailers, motorhomes, pickup trucks, and cars that use TireMinder TMG400C, TM66 or A1A monitors and have brass or stainless steel valve stems. They’re a practical pick for drivers who want a simple, low-profile way to replace lost or aging valve-cap TPMS sensors without professional installation. Ideal for people who prefer a compact solution with replaceable batteries and compatibility with a broad range of vehicles, these transmitters let you maintain wireless tire pressure monitoring with minimal fuss.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors fit rubber valve stems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — they are designed for brass and stainless steel stems and also fit common rubber valve stems used on many vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long do the batteries last and what type are they?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each transmitter uses a CR1632 coin cell with an expected life of about 9–14 months under normal use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TireMinder","offers":[{"title":"Default Title","offer_id":67584979730617,"sku":"B00HAMP79K","price":186.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tireminder-brass-transmitters-front-view.jpg?v=1790461929"},{"product_id":"tireminder-i10-rv-tpms-with-4-transmitters-black-3-15-color-lcd-rhino-booster","title":"TireMinder i10 RV TPMS with 4 Transmitters — Black, 3.15\" Color LCD \u0026 Rhino Booster","description":"\u003cstrong\u003eThe TireMinder i10 is a color RV tire-pressure monitoring system that continuously watches up to 20 tires at once and can store data for four vehicles (up to 40 tires total), delivering fast alerts for pressure and temperature issues.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned for RV owners who tow and haul, the i10 combines a large 3.15\" color LCD with a rhino signal booster and four external transmitters to provide reliable, real-time PSI and temperature readings. It displays up to ten tires simultaneously and automatically swaps between towing and towed vehicles so you always see the most relevant data without manual switching. The system checks tires every six seconds and records precise measurements from 0–199 PSI with ±1 PSI accuracy.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the i10 keep my RV and trailer tires monitored while driving?\u003c\/h3\u003e\n\u003cp\u003eThe i10 uses dedicated wireless transmitters mounted on each tire valve and a console with an integrated signal booster to receive data continuously. Readings refresh every six seconds, and the console will sound visual and audible alerts when preset thresholds are exceeded.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time PSI and temperature updates displayed on a 3.15\" color LCD\u003c\/li\u003e\n  \u003cli\u003eAutomatic swapping between front (towing) and rear (towed) vehicle displays\u003c\/li\u003e\n  \u003cli\u003eRhino signal booster improves reception over long lengths and through vehicle obstacles\u003c\/li\u003e\n  \u003cli\u003eChecks for slow leaks, rapid leaks, blowouts, low\/high pressure, and high temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tire coverage and accuracy can I expect with this TPMS?\u003c\/h3\u003e\n\u003cp\u003eThe i10 supports monitoring for up to 40 tires when you save four different vehicle profiles, and it actively displays up to ten tires on the screen at once. Pressure readings range from 0 to 199 PSI with +\/- 1 PSI accuracy, giving precise feedback for single-axle to multi-axle rigs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonitors up to 20 tires simultaneously per profile, 40 tires stored across four profiles\u003c\/li\u003e\n  \u003cli\u003ePSI range: 0–199 with ±1 PSI accuracy for dependable measurements\u003c\/li\u003e\n  \u003cli\u003eFour transmitters included; extra transmitters can be added for full-coverage setups\u003c\/li\u003e\n  \u003cli\u003eTemperature monitoring accompanies pressure to identify heat-related issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are alerts and warnings presented on the i10 console?\u003c\/h3\u003e\n\u003cp\u003eAlerts on the i10 are both visual and audible, so you’ll notice critical tire issues whether you’re focused on the road or parked. The system evaluates conditions every six seconds and triggers notifications for deviations from your preset limits, helping you respond quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAudible tones and on-screen color alerts for immediate recognition\u003c\/li\u003e\n  \u003cli\u003ePre-configured thresholds for low\/high pressure and high temperature\u003c\/li\u003e\n  \u003cli\u003eRapid-leak and blowout detection to flag sudden failures\u003c\/li\u003e\n  \u003cli\u003eCustomizable alert settings to match your towing setup and preferences\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The TireMinder i10 is aimed at RVers, motorhome owners, and anyone towing trailers who needs dependable, high-resolution tire monitoring for multi-axle rigs. It’s especially helpful for long-distance travelers, seasonal campers, and owners of combined towing\/towed setups who want the convenience of automatic switching between vehicles, detailed PSI and temperature readings, and enhanced signal strength for longer rigs or challenging reception conditions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many tires can the TireMinder i10 monitor at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The i10 displays up to 10 tires simultaneously, monitors up to 20 per vehicle, and can store four vehicle profiles (up to 40 tires total).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the i10 include a signal booster for long rigs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the i10 kit includes a rhino signal booster to improve reception across long or obstructed RV and trailer setups.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TireMinder","offers":[{"title":"Default Title","offer_id":67584989298873,"sku":"B082QJ7H1R","price":525.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tireminder-i10-console-front-display.jpg?v=1790462432"},{"product_id":"autel-maxitpms-ts508wf-tpms-diagnostic-relearn-tool-315-433-mhz-sensor-programming-obd2-built-in","title":"Autel MaxiTPMS TS508WF TPMS Diagnostic \u0026 Relearn Tool — 315\/433 MHz Sensor Programming, OBD2 Built-in","description":"\u003cp\u003e\u003cstrong\u003eThe Autel MaxiTPMS TS508WF is a handheld TPMS service tool that activates, diagnoses, relearns and programs Autel MX sensors while offering quick or full-service modes plus OBD2 support.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe TS508WF is the upgraded generation of Autel's TS508 line designed to speed up tire pressure monitoring system (TPMS) repairs for professional shops and DIY enthusiasts. With two selectable service modes, wireless sensor activation, on-tool relearn methods and the ability to program Autel MX sensors (315\/433 MHz), this unit combines diagnosis, reset and sensor programming in one compact device. It also includes an integrated OBD2 code reader for ECU relearns and fault scanning.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TS508WF make TPMS work faster?\u003c\/h3\u003e\n\u003cp\u003eThe tool gives technicians a choice between Quick Mode and Advanced Mode so you can match the workflow to the job. Quick Mode pulls essential sensor data rapidly for routine checks, while Advanced Mode runs full diagnostics and guided relearns for more complex repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick Mode: read sensor ID, pressure, temperature, battery and frequency quickly\u003c\/li\u003e\n  \u003cli\u003eAdvanced Mode: full TPMS diagnostics, position relearn and deeper inspection\u003c\/li\u003e\n  \u003cli\u003eHome-screen mode selection reduces unnecessary steps and repair time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the TS508WF program replacement sensors?\u003c\/h3\u003e\n\u003cp\u003eYes — the TS508WF programs Autel MX replacement sensors on both 315 MHz and 433 MHz frequencies. It supports multiple programming methods tailored to different scenarios, but it programs only Autel MX-series sensors and not third-party brands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAuto Create: mass-program 1–16 sensors quickly for fleet or multi-wheel jobs\u003c\/li\u003e\n  \u003cli\u003eCopy by OBD: clone sensor details directly via OBD for seamless ECU matching\u003c\/li\u003e\n  \u003cli\u003eForms and menu prompts guide sensor programming to minimize errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat relearn and diagnostic options are available?\u003c\/h3\u003e\n\u003cp\u003eThe TS508WF offers three on-tool relearn methods and TPMS system diagnostics to identify and clear fault codes. Wireless activation allows you to interrogate OE and aftermarket sensors to retrieve sensor IDs and battery status before committing to replacements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStationary Relearn: manual position-based relearn for controlled environments\u003c\/li\u003e\n  \u003cli\u003eAutomatic Relearn: wheel-by-wheel automatic registration during driving\u003c\/li\u003e\n  \u003cli\u003eRelearn by OBD: direct ECU relearn using the included OBD2 interface for precise registration\u003c\/li\u003e\n  \u003cli\u003eRead\/clear TPMS fault codes and check system health from the unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat extra tools and conveniences are included?\u003c\/h3\u003e\n\u003cp\u003eThis model expands on previous TS508 capabilities by adding a built-in OBD2 code reader and free lifetime updates for coverage of new vehicle models. The interface guides users through procedures and stores sensor data for streamlined service records.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated OBD2 scanner for ECU relearns and DTC clearing\u003c\/li\u003e\n  \u003cli\u003eFree lifetime software updates to keep vehicle coverage current\u003c\/li\u003e\n  \u003cli\u003eOn-device prompts and menus to simplify programming and relearn steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Autel MaxiTPMS TS508WF suits automotive technicians, tire shops, fleet maintenance teams and informed DIYers who need a versatile TPMS service tool that combines sensor activation, programming and full diagnostic capabilities. It is ideal when you use Autel MX sensors and want a faster, more controlled service flow; note that the device programs Autel sensors only and you should verify vehicle compatibility (VIN recommended) before work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the TS508WF program non-Autel sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The TS508WF only programs Autel MX-series sensors (315\/433 MHz).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the TS508WF include OBD relearn capability?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It has an integrated OBD2 reader for ECU relearns and code clearing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67585000571065,"sku":"B09TK8X25Y","price":426.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-ts508wf-front-view_f2f04ffb-ddb5-40d2-956d-8a5e86179cf0.jpg?v=1790462897"},{"product_id":"autel-mx-tpms-sensors-programmable-315mhz-433mhz-dual-frequency-universal-fit-lightweight-11g-design","title":"Autel MX TPMS Sensors programmable 315MHz\/433MHz dual-frequency — universal fit, lightweight 11g design","description":"\u003cstrong\u003eAutel MX TPMS Sensors are programmable, dual-frequency tire pressure sensors that fit most vehicles and can be cloned or batch-programmed using Autel tools.\u003c\/strong\u003e\n\nAutel MX Sensors combine universal compatibility with robust signal strength and a lightweight design to simplify TPMS service and replacement. Designed as a one-SKU solution, these sensors cover the majority of vehicles on the road by supporting both 315MHz and 433MHz frequencies and are intended to be programmed with Autel TPMS tools for accurate, reliable operation.\n\n\u003ch3\u003eHow do Autel MX Sensors make TPMS repairs faster and cheaper?\u003c\/h3\u003e\n\u003cp\u003eThe MX Sensor concept reduces inventory complexity by replacing many OEM-specific units with one programmable sensor. Technicians can keep fewer parts on the shelf and program a single sensor to match a vehicle’s frequency and ID, lowering repair costs and turnaround time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne SKU covers about 99% of TPMS-equipped vehicles.\u003c\/li\u003e\n  \u003cli\u003eLightweight 11 g body for easier handling and stable fitment.\u003c\/li\u003e\n  \u003cli\u003eWireless programming allows mounting before final setup.\u003c\/li\u003e\n  \u003cli\u003eCloning capability eliminates some relearn steps when replacing with original ID.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicle compatibility and frequency support do these sensors offer?\u003c\/h3\u003e\n\u003cp\u003eAutel MX Sensors are dual-frequency (315MHz and 433MHz) to accommodate regional and model variations without needing separate sensor models. They are built to meet broad coverage standards, making them suitable for most passenger cars and light-duty trucks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual 315MHz\/433MHz operation covers global vehicle fleets.\u003c\/li\u003e\n  \u003cli\u003ePress-in valve design for common installation on many wheels.\u003c\/li\u003e\n  \u003cli\u003eProgrammable to match vehicle sensor IDs and protocols using Autel tools.\u003c\/li\u003e\n  \u003cli\u003eCan be cloned to the original sensor ID for seamless replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable are the batteries, signal strength, and quality controls?\u003c\/h3\u003e\n\u003cp\u003eAutel emphasizes long-lasting battery performance and strong RF transmission to ensure dependable tire pressure reporting. Sensors undergo SAE testing and strict quality controls, and each unit includes a serial marking for traceability and warranty support.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality cell chemistry for battery life comparable to OE sensors.\u003c\/li\u003e\n  \u003cli\u003eMaximum signal strength supports wireless programming and batch setup.\u003c\/li\u003e\n  \u003cli\u003eSAE J1205\/J1206 testing compliance and 24-month\/24,000-mile limited coverage.\u003c\/li\u003e\n  \u003cli\u003eIndividual serial numbers printed for manufacturing traceability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and programming steps are required?\u003c\/h3\u003e\n\u003cp\u003eThe sensors use a press-in rubber\/metal valve arrangement that technicians can replace quickly. Note that Autel MX Sensors must be programmed with Autel-brand TPMS tools, and the sensor’s strong signal allows programming after mounting or in batches to save time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace sensor with press-in style for secure seating and quick service.\u003c\/li\u003e\n  \u003cli\u003eProgram frequency and ID using Autel TPMS diagnostic\/programming tools.\u003c\/li\u003e\n  \u003cli\u003eBatch-program up to 20 sensors with compatible Autel tools for fleet jobs.\u003c\/li\u003e\n  \u003cli\u003eClone existing sensor IDs when reinstalling into the same position to avoid relearn steps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for\n\nAutel MX TPMS Sensors are aimed at independent service shops, tire installers, and fleet maintenance teams that need fast, cost-effective TPMS repairs with reduced stock complexity. They suit technicians who use Autel diagnostic tools and want a single, lightweight sensor option that supports both major TPMS frequencies and provides traceable quality backed by SAE testing and Autel US after-sales support.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Autel MX Sensors work on 315MHz and 433MHz vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. MX Sensors support both 315MHz and 433MHz and can be programmed to the vehicle frequency using Autel TPMS tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I program Autel MX Sensors with any TPMS tool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Autel MX Sensors must be programmed with compatible Autel TPMS tools for full functionality and cloning.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67585003847865,"sku":"B0BHNW1G8Q","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-mx-front-packaging.jpg?v=1790463061"},{"product_id":"autel-tpms-sensor-mx-sensor-2in1-315-433mhz-dual-frequency-programmable-oe-id-cloning","title":"Autel TPMS Sensor MX-Sensor 2in1 315\/433MHz - Dual-Frequency Programmable, OE ID Cloning","description":"\u003cp\u003e\u003cstrong\u003eThe Autel MX-Sensor 2in1 is a programmable, dual-frequency tire pressure monitoring sensor that replaces OE units across most global vehicles without relearning.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Autel MX-Sensor combines 315MHz and 433MHz operation in a single programmable unit designed to clone original sensor IDs and slot directly into the same tire position. Built for use with Autel TPMS programming tools and many Autel diagnostic systems, the MX-Sensor aims to simplify sensor replacement for DIYers, tire shops, and service centers by reducing inventory needs and cutting installation time.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the MX-Sensor work with my vehicle and Autel tools?\u003c\/h3\u003e\n\u003cp\u003eThe MX-Sensor supports both common TPMS frequencies and stores original sensor IDs so it can be installed in the same wheel location without triggering a full relearn on many makes. When paired with compatible Autel programming tools, the sensor can be activated, cloned, and programmed quickly to match OEM parameters.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual 315MHz and 433MHz operation for broad vehicle coverage.\u003c\/li\u003e\n  \u003cli\u003e100% original ID cloning — fits same wheel position without relearn in many cases.\u003c\/li\u003e\n  \u003cli\u003eWorks with Autel tools like TS408S, TS501PRO, TS508WF, TS608, ITS600, MX900-TS, MP900-TS, MS906Pro-TS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these MX-Sensors fit the make and model I service?\u003c\/h3\u003e\n\u003cp\u003eAutel reports compatibility with more than 150 car brands and over 15,000 models worldwide, spanning American, European, and Asian manufacturers. The MX-Sensor’s interchangeable valve options and adjustable press-in design allow it to replace a wide range of OE sensor types.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Ford, GM, Toyota, Honda, BMW, VW, Mercedes-related models and many more.\u003c\/li\u003e\n  \u003cli\u003eInterchangeable rubber and metal valves to match OE valve styles.\u003c\/li\u003e\n  \u003cli\u003eDesigned to replace approximately 98% of common OE sensor variants with a single sensor type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast and flexible is programming and installation?\u003c\/h3\u003e\n\u003cp\u003eProgramming is engineered for speed and volume: up to 20 MX-Sensors can be programmed at once using supported Autel tools, and the press-in valve design shortens install time. The sensor’s wireless signal strength and rapid programming cycles streamline shop workflows and reduce customer wait times.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimultaneous programming of up to 20 sensors (Autel programming tool required).\u003c\/li\u003e\n  \u003cli\u003ePress-in rubber\/metal valve interchangeability for quick assembly.\u003c\/li\u003e\n  \u003cli\u003eLightweight (about 11 grams) with long-life automotive-grade battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and standards does the MX-Sensor meet?\u003c\/h3\u003e\n\u003cp\u003eThe MX-Sensor is built to withstand automotive conditions with an upgraded battery, corrosion-resistant materials, and compliance with common SAE test standards. The robust construction helps ensure consistent operation across temperature extremes and long service intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomotive-grade battery for extended service life.\u003c\/li\u003e\n  \u003cli\u003eResistant to cold, heat, and corrosion; meets SAE J1205\/J1206 testing expectations.\u003c\/li\u003e\n  \u003cli\u003eReplaceable rubber valve stem and durable housing for easier maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Autel MX-Sensor targets automotive technicians, tire shops, mobile repair services, and DIYers who need a cost-effective, OEM-equivalent TPMS replacement that reduces inventory complexity. If you use Autel TPMS programming tools or diagnostic systems and want versatile coverage for a wide range of vehicle makes, the MX-Sensor is designed to accelerate sensor replacement, cut downtime, and lower parts overhead without sacrificing compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Autel MX-Sensors require a relearn after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Often no—because MX-Sensors can clone original sensor IDs, they frequently install in the same wheel location without a full relearn when used with Autel tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Autel tools can program MX-Sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: MX-Sensors program with Autel TPMS tools like TS408S, TS501PRO, TS508WF, TS608, ITS600 and diagnostic systems such as MX900-TS and MS906Pro-TS.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67585005617337,"sku":"B09PFWRFS8","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-mx-sensor-front-view.jpg?v=1790463159"},{"product_id":"masoll-rv-tire-pressure-monitoring-system-tpms-set-of-4-sensors-with-color-lcd-ip69-booster-120-ft-range","title":"Masoll RV Tire Pressure Monitoring System TPMS — Set of 4 Sensors with Color LCD \u0026 IP69 Booster, 120 ft Range","description":"\u003cp\u003e\u003cstrong\u003eMasoll RV Tire Pressure Monitoring System (TPMS) set of 4 provides real-time tire pressure and temperature readings on a color LCD and includes an IP69 waterproof signal booster for reliable transmission up to 120 ft.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTraveling with an RV brings unique demands for tire safety and convenience. Masoll designed this TPMS specifically for RV applications — campers, trailers and motorhomes — offering a factory-paired, easy-to-install sensor kit with a bright color display and multiple audible\/visual alerts. The system works for setups with up to 145 psi and a 120-foot monitoring range, giving RVers a straightforward way to keep an eye on tire health while on the road.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Masoll TPMS make RV tire monitoring simpler?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with sensors pre-paired to the display, so there’s no complicated setup. Screw each sensor onto the valve stem according to the position labels, connect the monitor to power, and the system auto-calibrates the current pressure as its reference point.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-paired sensors — no manual pairing required.\u003c\/li\u003e\n  \u003cli\u003eAuto calibration sets the reference pressure during installation.\u003c\/li\u003e\n  \u003cli\u003ePosition-labeled sensors for easy placement on each tire.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat alerts and protections does it provide while driving?\u003c\/h3\u003e\n\u003cp\u003eMasoll TPMS watches for pressure and temperature changes and sounds both visual and audio alarms when readings fall outside set thresholds. Alerts include high\/low pressure, rapid leakage, high temperature, sensor loss, and low sensor battery—helping you respond quickly to potential tire issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh and low pressure warnings to prevent under- or over-inflation.\u003c\/li\u003e\n  \u003cli\u003eFast leak detection notifies you of sudden pressure drops.\u003c\/li\u003e\n  \u003cli\u003eTemperature alarms warn of overheating conditions that can signal stress on tires.\u003c\/li\u003e\n  \u003cli\u003eLow battery and sensor lost alerts keep the system dependable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the signal booster improve coverage for longer RVs?\u003c\/h3\u003e\n\u003cp\u003eThe included high-powered booster strengthens sensor transmissions so the monitor can receive signals up to 120 feet away, appropriate for long trailers and multi-axle rigs. The booster is fully sealed and rated IP69 for water and dust protection, with built-in high-voltage protection for rugged travel conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExtends communication range up to 120 ft — useful for long trailers.\u003c\/li\u003e\n  \u003cli\u003eIP69 waterproof and dustproof housing for harsh weather exposure.\u003c\/li\u003e\n  \u003cli\u003eIntegrated high-voltage protection increases durability and reliability.\u003c\/li\u003e\n  \u003cli\u003eBooster indicator on the monitor shows when the amplifier is active.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow readable and adjustable is the display for day and night driving?\u003c\/h3\u003e\n\u003cp\u003eThe Masoll monitor features a full-color LCD with four brightness settings, ensuring legible pressure and temperature readouts in varying light conditions. Adjust brightness for bright daytime sun or dim night driving so you never miss critical tire information.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eColor LCD provides clear numeric and icon displays.\u003c\/li\u003e\n  \u003cli\u003eFour brightness levels adapt to daylight or night driving.\u003c\/li\u003e\n  \u003cli\u003eVisual icons and color cues speed up status checks at a glance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: RV owners, camper and trailer drivers, and anyone who needs reliable remote tire monitoring for longer rigs. The Masoll RV TPMS set of 4 is ideal for those who want an out-of-the-box solution with simple installation, robust signal range, clear color readouts, and multi-condition alerts to help manage tire condition while traveling. It suits setups under 145 psi and within a 120-foot transmission range, and is available in different sensor counts to match single-axle or multi-axle RVs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the Masoll TPMS monitor more than four tires?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Masoll offers kits with 2, 4, 6, or 8 sensors so you can match your RV’s tire count.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to pair each sensor to the monitor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Sensors come factory-paired. Install on valve stems and the monitor auto-calibrates on power-up.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Masoll","offers":[{"title":"Default Title","offer_id":67585006436537,"sku":"B0GHRNZHFN","price":204.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/masoll-front-display-and-sensors.jpg?v=1790463218"},{"product_id":"autel-tpms-mx-sensor-set-of-4-dual-frequency-315-433-mhz-programmable-sensors-with-long-battery-life","title":"Autel TPMS MX-Sensor Set of 4 — Dual-Frequency 315\/433 MHz Programmable Sensors with Long Battery Life","description":"\u003cp\u003e\u003cstrong\u003eThe Autel TPMS MX-Sensor set of four are dual-frequency, programmable tire pressure sensors engineered to replace OE units across most vehicles while delivering long battery life and strong wireless performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese MX-Sensors combine 315MHz and 433MHz radio bands into a single, lightweight sensor designed to be programmed with Autel tools and installed as direct-fit replacements. They use Autel’s newest 88-series chip for faster, more stable cloning and wireless communications, and include interchangeable rubber and metal valve stems to suit different wheel applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I install and program Autel MX-Sensors?\u003c\/h3\u003e\n\u003cp\u003eMX-Sensors must be programmed using a compatible Autel TPMS programming device before being installed on a vehicle. Follow the tool’s prompts for ‘Auto Create’ and ensure the original sensor is moved away to prevent signal interference during programming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpdate your Autel tool software before programming.\u003c\/li\u003e\n  \u003cli\u003eMaintain at least 50 meters (165 ft) between original and new sensors while programming.\u003c\/li\u003e\n  \u003cli\u003eUse the listed Autel devices (TS408, TS508, TS601, TS608, TS900, MK900TS, etc.).\u003c\/li\u003e\n  \u003cli\u003eClone sensor ID if replacing in the same wheel position to avoid relearn steps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these sensors work on my vehicle model?\u003c\/h3\u003e\n\u003cp\u003eOne MX-Sensor supports both 315MHz and 433MHz signals, covering around 98% of TPMS-equipped vehicles. Compatibility depends on the vehicle’s OEM sensor frequency and whether your shop or technician has an Autel programming tool to configure the sensor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for cars, SUVs, and light trucks using standard TPMS frequencies.\u003c\/li\u003e\n  \u003cli\u003eCheck vehicle fitment and frequency before purchase.\u003c\/li\u003e\n  \u003cli\u003eProgramming tool ownership is required for successful deployment.\u003c\/li\u003e\n  \u003cli\u003eAutel’s dual-frequency approach reduces SKU counts for repair shops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eThese sensors are built to meet OE-level standards for accuracy and thermal range, featuring a battery life designed to last multiple years under typical driving conditions. They are lightweight and pass SAE tests for industry compliance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating range: -40°C to 125°C and pressure readings up to 800 kPa.\u003c\/li\u003e\n  \u003cli\u003eBattery life estimated at 4–6 years or roughly 24,000 miles under normal use.\u003c\/li\u003e\n  \u003cli\u003eSensor accuracy within ±10 kPa and SAE J1205\/J1206 tested.\u003c\/li\u003e\n  \u003cli\u003eLow-profile housing weighing about 11 g for less rotating mass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat special notes should technicians and DIYers know?\u003c\/h3\u003e\n\u003cp\u003eProgramming with official Autel tools is mandatory — third-party TPMS programmers are not supported for MX-Sensors. Autel provides technical support and a two-year quality warranty for these MX units if you encounter issues during setup or operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMX-Sensors are not compatible with non-Autel programming tools.\u003c\/li\u003e\n  \u003cli\u003eAutel offers technical help at autelusa@outlook.com for setup questions.\u003c\/li\u003e\n  \u003cli\u003eUp to 16 sensors can be programmed in a single session with updated tools.\u003c\/li\u003e\n  \u003cli\u003eCloning keeps original sensor IDs to avoid additional relearn steps when placed in same position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Autel MX-Sensor sets are designed for independent repair shops, tire specialists, fleet maintenance teams, and experienced DIYers who already own or plan to use Autel TPMS programming tools. They’re especially useful for operations that want to minimize inventory SKUs while supporting nearly all common TPMS-equipped vehicles. Confirm you have a compatible Autel tool before purchasing to ensure smooth programming and installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Autel MX-Sensors work without programming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. MX-Sensors must be programmed with an Autel TPMS programming tool before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Autel tools support MX-Sensor programming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Supported tools include TS408, TS508, TS601, TS608, TS900 and Autel diagnostic scanners like MK900TS.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67585008304313,"sku":"B09XR58Q2N","price":234.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-mx-sensor-front-view_jpg.jpg?v=1790463329"},{"product_id":"gearwrench-universal-programmable-metal-tpms-sensor-kit-4-pack-dual-frequency-315-433-mhz-with-oe-id-cloning","title":"GEARWRENCH Universal Programmable Metal TPMS Sensor Kit — 4-Pack, Dual-Frequency (315\/433 MHz) with OE ID Cloning","description":"\u003cp\u003e\u003cstrong\u003eGEARWRENCH GWTPMSM4PK is a four-pack of universal, programmable metal TPMS sensors that clone OE IDs and support both 315 MHz and 433 MHz for fast, reliable tire-pressure monitoring service.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis GEARWRENCH universal programmable metal TPMS sensor kit is built to simplify shop workflows and reduce diagnostic time. Designed to work across the vast majority of passenger and light-truck vehicles worldwide, each sensor programs in seconds with a compatible GEARWRENCH TPMS tool and offers OE-level readings for pressure, temperature, and battery status. The metal housing increases durability for professional service environments while dual-frequency capability and full ID cloning eliminate many common relearn hassles.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly can these sensors be programmed in the shop?\u003c\/h3\u003e\n\u003cp\u003eProgramming is designed to be fast and straightforward so technicians can finish TPMS jobs without multiple trips. Using any GEARWRENCH TPMS programming or diagnostic tool, each sensor is identified and programmed in seconds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with GEARWRENCH TPMS programming\/diagnostic tools for instant setup\u003c\/li\u003e\n  \u003cli\u003eSupports 315 MHz and 433 MHz frequencies in one device\u003c\/li\u003e\n  \u003cli\u003e100% ID cloning copies OE sensor ID—no relearn required on many vehicles\u003c\/li\u003e\n  \u003cli\u003eFour sensors per kit for full-vehicle replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these fit my customer’s vehicles and avoid compatibility headaches?\u003c\/h3\u003e\n\u003cp\u003eThe sensors are engineered for near-universal fitment to cover most late-model passenger cars and light trucks. Their dual-frequency design and wide compatibility reduce the need to stock multiple part numbers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with approximately 99% of vehicles worldwide\u003c\/li\u003e\n  \u003cli\u003eUniversal valve and metal housing for workshop durability\u003c\/li\u003e\n  \u003cli\u003eSingle SKU covers both common TPMS frequencies\u003c\/li\u003e\n  \u003cli\u003eIdeal for mixed-fleet service centers and mobile technicians\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow accurate and durable are the readings and hardware?\u003c\/h3\u003e\n\u003cp\u003eGEARWRENCH sensors are tuned to provide precise pressure and temperature readouts comparable to original equipment. The metal construction enhances longevity for frequent service or harsh-road conditions while preserving reliable battery and temperature reporting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE-level pressure and temperature accuracy for dependable diagnostics\u003c\/li\u003e\n  \u003cli\u003eRobust metal housing resists corrosion and shop handling wear\u003c\/li\u003e\n  \u003cli\u003eBattery and temperature telemetry included for complete monitoring\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain performance across normal operating temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and procedures are required to install the GWTPMSM4PK kit?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires a standard tire shop workflow plus a GEARWRENCH TPMS programming\/diagnostic tool to set IDs or clone OE sensors. No special relearn on many vehicles when using the cloning feature.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount and torque sensors per vehicle manufacturer torque specs\u003c\/li\u003e\n  \u003cli\u003eUse a GEARWRENCH TPMS tool to program or clone IDs in seconds\u003c\/li\u003e\n  \u003cli\u003eCloning avoids many OBD or driving relearn procedures when supported\u003c\/li\u003e\n  \u003cli\u003eFour-sensor kit allows complete vehicle replacement in one visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The GEARWRENCH GWTPMSM4PK is aimed at professional mechanics, independent tire shops, fleet maintenance teams, and mobile service technicians who need a single, durable TPMS solution with broad compatibility. If you want to simplify inventory, speed up TPMS jobs, and deliver OE-comparable readings while avoiding frequent part swaps, this four-pack offers a practical, shop-ready option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sensor support both 315 MHz and 433 MHz?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The GEARWRENCH sensor supports both 315 MHz and 433 MHz in one unit for wide vehicle coverage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I avoid a relearn procedure after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Often yes—these sensors can 100% clone OE IDs, eliminating many relearn steps when used with a GEARWRENCH TPMS tool.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GEARWRENCH","offers":[{"title":"Default Title","offer_id":67585014530233,"sku":"B0GJ12M3WL","price":188.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gearwrench-front-packaging-metal-tpms.jpg?v=1790463487"},{"product_id":"tymate-rv-tire-pressure-monitoring-system-tm12-6-sensor-tpms-for-trailers-with-color-receiver-solar-usb-c-charging","title":"Tymate RV Tire Pressure Monitoring System TM12 — 6-Sensor TPMS for Trailers with Color Receiver \u0026 Solar\/USB-C Charging","description":"\u003cp\u003e\u003cstrong\u003eThe Tymate TM12 is a 6-sensor RV tire pressure monitoring system that displays up to 12 tire readings in real time, giving drivers clear pressure and temperature alerts for safer towing and long trips.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for trailers, RVs, and vehicles that tow, the TM12 combines weatherproof external sensors with a color receiver that supports four zones and split-screen views. The monitor can show up to six front-vehicle tires simultaneously and cycle through up to 12 tires across labeled zones, making it easier to track both vehicle and trailer tires without swapping devices or guessing which sensor belongs where.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TM12 keep me aware of tire problems while driving?\u003c\/h3\u003e\n\u003cp\u003eThe system continuously measures pressure and temperature and issues audible and visual alarms when readings move outside preset ranges. Alerts cover rapid leaks, overpressure, high temperature, low pressure, low sensor battery and lost signal, helping you respond sooner to emerging issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time updates from six external IP67 sensors\u003c\/li\u003e\n  \u003cli\u003eSix alarm modes including rapid air loss detection\u003c\/li\u003e\n  \u003cli\u003eColor receiver with clear visual and audible warnings\u003c\/li\u003e\n  \u003cli\u003eAutomatic calibration thresholds for high and low pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat power options keep the display running on long trips?\u003c\/h3\u003e\n\u003cp\u003eThe TM12 receiver supports dual charging so you can rely on consistent power on the road. Use the USB-C input to top up from a 12V vehicle adapter, or let the integrated solar panel add charge when parked or driving in sunlight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUSB-C fast charging for first-time and emergency charging\u003c\/li\u003e\n  \u003cli\u003eSolar panel for supplemental trickle charging during daylight\u003c\/li\u003e\n  \u003cli\u003eManual shutoff possible when not charging by cable\u003c\/li\u003e\n  \u003cli\u003eRecommendation: fully charge via USB-C before initial use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and setup for an RV or trailer?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be a DIY project—sensors arrive pre-programmed to locations, so there’s no complicated pairing process for most users. Each sensor screws onto a metal valve stem and the receiver auto-calibrates, reducing time spent at a shop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-paired sensors labeled for each wheel position\u003c\/li\u003e\n  \u003cli\u003eQuick screw-on installation; no special tools required\u003c\/li\u003e\n  \u003cli\u003eAutomatic pressure calibration with clear thresholds\u003c\/li\u003e\n  \u003cli\u003eRecommendation to use metal valve stems for stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan the TM12 handle large rigs and long signal distances?\u003c\/h3\u003e\n\u003cp\u003eThe TM12 is built to work across long towing distances, and its receiver has strong signal penetration for typical RV setups. For very large rigs or when obstacles block radio paths, an optional repeater extends the range beyond the default 50-foot stability window.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard 50 ft stable transmission; extendable with repeater\u003c\/li\u003e\n  \u003cli\u003eCompatible with pressures from 0–144 PSI for most vehicles\u003c\/li\u003e\n  \u003cli\u003eSupports vehicles, SUVs, pickups, RVs and towable trailers\u003c\/li\u003e\n  \u003cli\u003eExpandable to monitor up to 12 tires across four zones\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Tymate TM12 is aimed at RV owners, tow vehicle drivers and anyone hauling trailers who wants continuous, easy-to-read tire data without frequent pit stops. Choose the TM12 Pro when you need six sensors for a medium RV or trailer; opt for the Ultra bundle (sensors plus repeater) for larger tow setups or where signal obstacles are expected. It’s also a fit for drivers upgrading older TPMS systems who want clearer displays, solar-assisted power and quick DIY installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the TM12 work with trailers and RVs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The TM12 supports up to 12 tires across four zones and is suitable for RVs, trailers, pickups and most towable rigs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What powers the TM12 display?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The display charges via USB-C from a 12V source and uses a built-in solar panel for supplemental charging.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Tymate","offers":[{"title":"Default Title","offer_id":67585029111993,"sku":"B0FH1JZZ9X","price":198.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tymate-tm12-front-display.jpg?v=1790464120"},{"product_id":"autel-mx-sensor-tpms-set-of-4-315-433mhz-dual-band-programmable-sensors-with-interchangeable-valves","title":"Autel MX-Sensor TPMS Set of 4 315\/433MHz — Dual-Band Programmable Sensors with Interchangeable Valves","description":"\u003cp\u003e\u003cstrong\u003eThe Autel MX-Sensor TPMS set of 4 are universal, programmable tire-pressure sensors (315\/433MHz) engineered to replace most OE units and be reprogrammed exclusively with Autel TPMS tools.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Autel MaxiTPMS MX-Sensors combine dual-frequency coverage, interchangeable valve stems, and unrestricted reprogramming to simplify inventory and speed service. Built to meet SAE testing standards and designed for use with Autel’s TS- and MX-series programmers and compatible diagnostic tools, the four-sensor kit aims to deliver OE-like performance, long battery life, and stable wireless transmission for passenger vehicles from North America, Europe, and Asia.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these Autel sensors simplify shop inventory?\u003c\/h3\u003e\n\u003cp\u003eOne SKU covers the vast majority of passenger cars that use direct TPMS thanks to the MX-Sensor’s dual 315\/433MHz capability and two valve options. That means shops and distributors can reduce the number of different sensors they stock while still serving most makes and models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle MX-Sensor SKU replaces many OEM-specific sensors.\u003c\/li\u003e\n  \u003cli\u003eIncludes both rubber and metal interchangeable valve stems.\u003c\/li\u003e\n  \u003cli\u003eDual-band 315\/433MHz works across American, European, and Asian passenger cars.\u003c\/li\u003e\n  \u003cli\u003eSuitable for common service workflows—except for Bluetooth-based EV systems and heavy commercial vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are Autel MX-Sensors programmed and installed?\u003c\/h3\u003e\n\u003cp\u003eMX-Sensors must be activated and programmed using official Autel TPMS tools—third-party scanners are not compatible. Programming can be done wirelessly, and compatible Autel tools support batch processes to speed high-volume work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProgram only with Autel MaxiTPMS\/Autel diagnostic tools (TS408S, TS501 PRO, TS508WF, ITS600, MK808S-TS, etc.).\u003c\/li\u003e\n  \u003cli\u003eSupports wireless programming and batch programming up to 20 sensors with compatible tools.\u003c\/li\u003e\n  \u003cli\u003eInterchangeable press-in rubber and metal valves allow quick physical installation.\u003c\/li\u003e\n  \u003cli\u003eFollow Autel’s programming tips (distance separation, latest software, and Auto Create function) for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these sensors be reused or cloned after removal?\u003c\/h3\u003e\n\u003cp\u003eThe MX-Sensor design supports unlimited reprogramming, so sensors can be recycled and repurposed rather than discarded. They also support cloning of an original sensor ID to avoid a relearn step when installed in the same wheel position.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUnlimited reprogramming prevents waste and reduces replacement costs.\u003c\/li\u003e\n  \u003cli\u003eCloning copies the original sensor ID so no relearn is required if installed in the same position.\u003c\/li\u003e\n  \u003cli\u003eWireless reprogramming reduces contact time and speeds service routines.\u003c\/li\u003e\n  \u003cli\u003eRequires Autel programming tools to perform cloning and reprogramming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and scenarios are these Autel MX-Sensors compatible with?\u003c\/h3\u003e\n\u003cp\u003eThese MX-Sensors cover around 99% of direct TPMS-equipped passenger vehicles across major manufacturers, but they do not support Bluetooth-based TPMS systems (such as certain EVs), heavy-duty commercial vehicles, or heavily modified wheel\/tire setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many Ford, Chevrolet, Toyota, Honda, BMW, VW models and more.\u003c\/li\u003e\n  \u003cli\u003eNot for Bluetooth-only TPMS vehicles (select EVs) or commercial 12V\/24V trucks.\u003c\/li\u003e\n  \u003cli\u003eIf in doubt, provide year\/make\/model to Autel support for confirmation.\u003c\/li\u003e\n  \u003cli\u003eAutel offers a warranty and customer support to verify fitment within 24 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technicians, tire shops, and parts distributors who want a reliable, universal TPMS solution that reduces SKU complexity, supports high-volume programming, and matches OE battery and signal performance. It’s especially useful for businesses that already use Autel TPMS tools and need easily reprogrammable sensors with interchangeable valve options and a two-year warranty.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Autel MX-Sensors work with non-Autel TPMS tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. MX-Sensors must be programmed with official Autel TPMS tools for activation and cloning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these sensors be reused after removal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They support unlimited reprogramming and can be cloned for reuse when reinstalled in the same position.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67585043693753,"sku":"B07MTFVXPK","price":234.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-mx-sensor-front-packaging_fc597889-00be-4f4e-b18b-1e8038372be8.jpg?v=1790464884"},{"product_id":"ateq-vt37-tpms-activation-programming-tool-handheld-sensor-diagnostic-relearn-guidance","title":"ATEQ VT37 TPMS Activation \u0026 Programming Tool — Handheld Sensor Diagnostic, Relearn Guidance","description":"\u003cp\u003e\u003cstrong\u003eThe ATEQ VT37 is a handheld TPMS activation and programming tool that diagnoses sensors, activates OEM and aftermarket TPMS units, and guides you through vehicle relearn procedures.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe VT37 combines broad vehicle coverage with sensor programming and relearn guidance in a compact device built for professional technicians and DIYers. It detects and reads TPMS sensor IDs, programs over 20 third‑party sensor brands, and pairs with scan tools for bi‑directional relearns on import models. The user interface presents step‑by‑step relearn instructions and supports both manual and automatic relearn modes for domestic and European vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the VT37 identify and read TPMS sensors?\u003c\/h3\u003e\n\u003cp\u003eThe VT37 locates active TPMS sensors and captures their sensor IDs so you can verify status or prepare for replacement. It listens for sensor transmissions and displays sensor data quickly, saving diagnostic time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDetects transmitting sensors and shows sensor ID numbers\u003c\/li\u003e\n  \u003cli\u003eReads sensor pressure and battery state when available\u003c\/li\u003e\n  \u003cli\u003eWorks across both direct TPMS and common aftermarket sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this tool program aftermarket TPMS sensors?\u003c\/h3\u003e\n\u003cp\u003eYes — the VT37 programs more than twenty leading aftermarket sensor brands, letting you match replacement sensors to the vehicle's TPMS system. Programming is performed from the hand unit using guided menus that reduce setup errors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports programming for 20+ aftermarket sensor manufacturers\u003c\/li\u003e\n  \u003cli\u003eGuided prompts ensure correct sensor selection and configuration\u003c\/li\u003e\n  \u003cli\u003eStores programmed sensor IDs for quick installation and verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat relearn methods does the VT37 support for resetting TPMS systems?\u003c\/h3\u003e\n\u003cp\u003eThe device supports manual and automatic relearn routines for domestic and many European cars, and it can display exact procedures required by a vehicle. For import vehicles that require more advanced resets, the VT37 can be paired with a bi‑directional scan tool to complete the relearn.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisplays step‑by‑step relearn procedures specific to the vehicle\u003c\/li\u003e\n  \u003cli\u003eManual and auto relearn options for compatible models\u003c\/li\u003e\n  \u003cli\u003ePairs with bi‑directional scan tools to reset import\/complex systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the VT37 fit into a professional workflow?\u003c\/h3\u003e\n\u003cp\u003eThe VT37 is designed for busy shops that need a reliable, portable TPMS device for diagnostics, sensor programming, and relearn guidance. Its broad sensor coverage and compatibility with industry scan tools make it an efficient companion for tire service, replacement, and fleet maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHandheld, durable design for shop and mobile service use\u003c\/li\u003e\n  \u003cli\u003eSaves time by combining detection, programming, and relearn guidance\u003c\/li\u003e\n  \u003cli\u003eCompatible with scan tools for expanded vehicle support and resets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The ATEQ VT37 is intended for automotive technicians, tire shop professionals, fleet maintenance teams, and experienced DIYers who replace or service TPMS sensors. If you need a dependable tool to identify sensor IDs quickly, program aftermarket sensors, and follow manufacturer relearn steps — especially when pairing with a scan tool for import vehicles — the VT37 delivers the necessary coverage and workflow efficiency without excess complexity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the VT37 program aftermarket TPMS sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The VT37 programs over 20 leading aftermarket sensor brands and stores programmed IDs for verification.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the VT37 reset TPMS systems on import vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It shows relearn procedures and pairs with bi‑directional scan tools to reset many import vehicles requiring advanced relearns.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ATEQ","offers":[{"title":"Default Title","offer_id":67585057292473,"sku":"B08H8TKSW9","price":503.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ateq-vt37-front-display.jpg?v=1790465361"},{"product_id":"masoll-m23-tpms-tire-pressure-monitoring-system-for-rvs-and-trailers-4-external-sensors-color-monitor","title":"Masoll M23 TPMS Tire Pressure Monitoring System for RVs and Trailers — 4 External Sensors, Color Monitor","description":"\u003cp\u003e\u003cstrong\u003eMasoll M23 is a four-sensor tire pressure monitoring system that gives continuous, color-coded pressure and temperature readouts and instant alarms to help protect your RV, trailer or car tires during travel.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Masoll M23 TPMS combines a high-definition color monitor with four lightweight external sensors that auto-calibrate and relay tire pressure and temperature in real time. Designed for road vehicles including RVs, campers, trailers (under 38 ft) and standard cars, this kit emphasizes easy installation, long battery life and multiple alarm modes so you get actionable information without complicated setup.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the M23 detect problems while I’m driving?\u003c\/h3\u003e\n\n\u003cp\u003eThe M23 continuously receives sensor transmissions and evaluates pressure and temperature against preset thresholds. If a sensor reports a rapid leak, low\/high pressure, high temperature, weak battery or signal loss, the monitor sounds an audible alert and shows the affected wheel with color indicators.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAuto-calibrates reference pressure when tires are inflated to the correct level.\u003c\/li\u003e\n  \u003cli\u003eImmediate alert for pressure drops of 15% or rises of 25% from the reference.\u003c\/li\u003e\n  \u003cli\u003eSeparate icons for rapid pressure loss, high\/low pressure, high temperature, low battery and signal lost.\u003c\/li\u003e\n  \u003cli\u003eHigh-precision sensors with \u0026lt;1.5 PSI accuracy and temperature measurement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat setup and power options does the M23 monitor offer?\u003c\/h3\u003e\n\n\u003cp\u003eThe M23 monitor has plug-and-play simplicity: sensors transmit automatically after installation and the monitor memorizes reference pressure without manual programming. The display features auto backlight adjustment for day\/night readability and the monitor sleeps after inactivity to conserve power, waking when vibration or vehicle use resumes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlug-in or dashboard mount monitor with auto-brightness color screen.\u003c\/li\u003e\n  \u003cli\u003eMonitor enters sleep mode after 15 minutes and wakes via vibration or vehicle start.\u003c\/li\u003e\n  \u003cli\u003eSensors powered by replaceable CR1632 batteries with about two years’ life under normal use.\u003c\/li\u003e\n  \u003cli\u003eNo dynamic wheel balancing required thanks to the sensors’ lightweight design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this TPMS fit my RV or trailer and how far will the signal reach?\u003c\/h3\u003e\n\n\u003cp\u003eThe Masoll M23 supports most passenger vehicles, light trucks, SUVs and RVs and is recommended for trailers up to 38 ft without additional equipment. For trailers longer than 38 ft, adding a Masoll signal booster improves transmission reliability between sensors and the monitor.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with sedans, SUVs, MPVs, pickups, RVs, campers and travel trailers under 38 ft.\u003c\/li\u003e\n  \u003cli\u003eSensor transmissions tested for reliable sealing and signal integrity at manufacture.\u003c\/li\u003e\n  \u003cli\u003eSignal booster recommended to extend range for long trailers or unusual mounting layouts.\u003c\/li\u003e\n  \u003cli\u003eSensors operate reliably in extreme cold down to -40°F.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I know the sensors are durable and accurate?\u003c\/h3\u003e\n\n\u003cp\u003eEach sensor undergoes factory testing for sealing and transmission before shipping to reduce failures in the field. The sensors are engineered for highway and long-distance travel, offering precise pressure readings and temperature monitoring to help you spot issues early.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFactory-tested for sealing and signal transmission quality.\u003c\/li\u003e\n  \u003cli\u003eHigh-precision pressure accuracy under 1.5 PSI for timely alerts.\u003c\/li\u003e\n  \u003cli\u003eLightweight construction minimizes impact on wheel balance.\u003c\/li\u003e\n  \u003cli\u003eReplaceable CR1632 batteries and two-year expected battery life under normal conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Masoll M23 TPMS is aimed at drivers who tow or travel long distances and want continuous, clear tire condition data without complex installation. It’s a practical choice for RV owners, travel trailer users, and motorists who prefer an external-sensor system with auto-calibration, multiple alarm modes and a bright color display for safer trips and better peace of mind on the road.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the Masoll M23 sensors need programming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No manual programming is required; sensors auto-calibrate when tires are inflated to the correct pressure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use the M23 on a trailer longer than 38 feet?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, but Masoll recommends adding a signal booster for trailers over 38 feet to ensure reliable transmission.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Masoll","offers":[{"title":"Default Title","offer_id":67585066139833,"sku":"B0FF34S271","price":167.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/masoll-m23-monitor-front-display.jpg?v=1790465871"},{"product_id":"bartec-usa-rite-sensor-sleeve-pack-rs-2000-10-10-multi-frequency-tpms-sensors-with-rubber-stems","title":"BARTEC USA RITE-Sensor Sleeve Pack RS-2000-10 — 10 Multi-Frequency TPMS Sensors with Rubber Stems","description":"\u003cstrong\u003eThe BARTEC USA RITE-Sensor Sleeve Pack RS-2000-10 is a boxed kit of ten programmable multi-frequency TPMS sensors that fit most vehicles and include rubber valve stems for rapid service installs.\u003c\/strong\u003e\n\n\u003cp\u003eBuilt to replace the RS-1000 series, the RS-2000-10 delivers broad vehicle coverage in a single SKU for tire shops and service centers. Each RITE-SENSOR® supports both 315 MHz and 433 MHz frequencies and is designed to be programmed quickly on the vehicle using BARTEC’s RiteSync technology. The sleeve-pack “red box” keeps ten sensors organized and ready for same-day installs, and BARTEC USA backs the product with a limited lifetime warranty.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this sensor pack simplify inventory and installs?\u003c\/h3\u003e\n\u003cp\u003eThe RS-2000-10 reduces the need to stock multiple sensor types by offering near-universal fitment across passenger and light truck applications. Technicians can use one SKU to cover most vehicles, cutting inventory complexity and speeding up service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTen identical multi-frequency sensors in one boxed sleeve pack\u003c\/li\u003e\n  \u003cli\u003eWorks across 98% of single-SKU vehicle applications\u003c\/li\u003e\n  \u003cli\u003eIncludes rubber valve stems and optional clamp-in hardware\u003c\/li\u003e\n  \u003cli\u003eCompact packaging for shelf and service-bay storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes programming and setup faster during a tire job?\u003c\/h3\u003e\n\u003cp\u003eRite-Sensor units use RiteSync programming that lets technicians program sensors while the tire is mounted and inflated, eliminating time-consuming pre-program steps. The process pairs with BARTEC TPMS tools for fast relearn procedures at the wheel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProgram sensors on the vehicle during the relearn process\u003c\/li\u003e\n  \u003cli\u003eCompatible only with BARTEC TPMS tools using RiteSync\u003c\/li\u003e\n  \u003cli\u003eSimplifies TPMS relearn and reduces bench programming time\u003c\/li\u003e\n  \u003cli\u003eSupports both common TPMS frequencies for broad coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these sensors fit my customers’ vehicles and valves?\u003c\/h3\u003e\n\u003cp\u003eEach RITE-SENSOR is engineered for wide application coverage and ships with rubber valve stems; clamp-in stems are also provided depending on supplier configuration. The dual-frequency design ensures compatibility with most OE systems using either 315 MHz or 433 MHz.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-frequency operation: 315 MHz and 433 MHz\u003c\/li\u003e\n  \u003cli\u003eRubber valve stems included; metal\/clamp options available\u003c\/li\u003e\n  \u003cli\u003eDesigned to replace RS-1000 series sensors seamlessly\u003c\/li\u003e\n  \u003cli\u003eHigh fitment rate across passenger cars and light trucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the RITE-Sensor RS-2000-10?\u003c\/h3\u003e\n\u003cp\u003eBARTEC USA provides a limited lifetime warranty on RITE-SENSOR units, offering service centers reassurance when installing these aftermarket sensors. Technical support and compatibility guidance are available through BARTEC’s support channels to help troubleshoot programming or fitment questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLimited lifetime warranty from BARTEC USA\u003c\/li\u003e\n  \u003cli\u003eDedicated TPMS tool compatibility and support resources\u003c\/li\u003e\n  \u003cli\u003eDocumentation and service guidance for installers\u003c\/li\u003e\n  \u003cli\u003eBatch packaging for traceability and inventory control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The RS-2000-10 sleeve pack is targeted at tire dealers, quick lube shops, and independent service centers that need a single, reliable TPMS sensor SKU to cover most customers’ vehicles. It’s especially useful for technicians who prioritize fast on-wheel programming, simplified stock management, and wide OE frequency compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these sensors be programmed after tire mounting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. RITE-SENSOR units support on-wheel programming during the relearn using BARTEC RiteSync tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the sensors work with both 315 MHz and 433 MHz systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each RS-2000-10 sensor is dual-frequency compatible with 315 MHz and 433 MHz systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BARTEC USA","offers":[{"title":"Default Title","offer_id":67585087799481,"sku":"B0CMCGYJ44","price":463.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bartec-rite-sensor-front-box.jpg?v=1790466807"},{"product_id":"mucar-t261-tpms-programming-relearn-tool-315-433mhz-bluetooth-ecu-id-cloning","title":"mucar T261 TPMS Programming \u0026 Relearn Tool — 315\/433MHz Bluetooth, ECU ID Cloning","description":"\u003cp\u003e\u003cstrong\u003eThe MUCAR T261 is a handheld TPMS programming and relearn tool that activates and programs 315MHz and 433MHz sensors for broad vehicle coverage and fast Bluetooth-assisted diagnostics.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for technicians and informed car owners, the T261 combines compact hardware, wireless connectivity and app integration to simplify tire pressure monitoring system tasks. It supports most current TPMS sensor protocols, enables ECU ID cloning and offers unlimited reprogramming for MUCAR sensors. The device’s responsive screen and ruggedized size make it practical for the shop bay or roadside service.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly can I program or relearn a sensor with the T261?\u003c\/h3\u003e\n\u003cp\u003eProgramming and relearn operations are designed to be fast and repeatable thanks to instant Bluetooth pairing and optimized activation routines. Typical activation takes only seconds depending on the sensor and vehicle ECU, letting you return a car to service sooner.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth pairing for immediate connection to the mobile app.\u003c\/li\u003e\n  \u003cli\u003eRapid sensor activation for both 315MHz and 433MHz frequencies.\u003c\/li\u003e\n  \u003cli\u003eQuick ECU ID cloning to restore vehicle TPMS recognition.\u003c\/li\u003e\n  \u003cli\u003eUnlimited reprogramming sessions for MUCAR sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and sensors will this tool work with?\u003c\/h3\u003e\n\u003cp\u003eThe T261 targets wide compatibility and covers roughly 98% of passenger vehicles on the road, supporting both common TPMS frequencies. It’s fully capable of programming MUCAR-branded sensors and interfaces with many OEM systems for relearn procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports 315MHz and 433MHz sensor frequencies for broad make\/model coverage.\u003c\/li\u003e\n  \u003cli\u003eWorks with OEM and MUCAR sensors for programming and activation.\u003c\/li\u003e\n  \u003cli\u003eDesigned to handle the majority of modern passenger cars and light trucks.\u003c\/li\u003e\n  \u003cli\u003eIncludes ECU ID cloning to match vehicle-specific TPMS setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat diagnostic and connectivity features does the T261 provide?\u003c\/h3\u003e\n\u003cp\u003eThe unit pairs with the MUCAR Scanner and mobile app to deliver deeper TPMS diagnostics, on-screen instructions and saved reports. Bluetooth connectivity streamlines workflows, while the integrated screen shows status and diagnostic prompts in real time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePair with MUCAR Scanner for full TPMS diagnostic routines.\u003c\/li\u003e\n  \u003cli\u003eSync to the mobile app for OE lookups, activation logs and reports.\u003c\/li\u003e\n  \u003cli\u003eOn-device display (1.77-inch) for instant feedback and guidance.\u003c\/li\u003e\n  \u003cli\u003eOperating range built for fieldwork from -10°C to 50°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow portable and durable is the MUCAR T261 for everyday use?\u003c\/h3\u003e\n\u003cp\u003eThe T261 was engineered to be easily carried and used in busy garages or outside service calls. Its compact dimensions and robust exterior let you keep it on a tool cart, in a glovebox or in a technician’s kit without taking up much space.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact footprint: 238.50 x 59.10 x 29.99 mm for easy storage.\u003c\/li\u003e\n  \u003cli\u003eSturdy exterior for shop and roadside environments.\u003c\/li\u003e\n  \u003cli\u003eVibrant 1.77-inch screen for clear readings on the move.\u003c\/li\u003e\n  \u003cli\u003eOperates reliably across common temperature ranges (-10°C to 50°C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The MUCAR T261 is aimed at automotive service professionals, independent tire shops and knowledgeable DIYers who need a dependable TPMS programming and relearn device. If you routinely replace TPMS sensors, perform TPMS diagnostics or require rapid ECU ID cloning, this tool offers the wireless convenience, broad compatibility and unlimited programming capability valued in frequent-use environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the T261 support both 315MHz and 433MHz sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the T261 programs and activates TPMS sensors on both 315MHz and 433MHz frequencies.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reprogram MUCAR sensors more than once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — MUCAR sensors can be reprogrammed an unlimited number of times with the T261.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"mucar","offers":[{"title":"Default Title","offer_id":67585101496505,"sku":"B0G2RYQS2V","price":229.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/mucar-t261-front-view.jpg?v=1790467340"},{"product_id":"t-sportline-tesla-ble-tpms-sensors-set-of-4-oem-black-anodized-valve-stems-auto-pair-for-model-3-y-s-x","title":"T Sportline Tesla BLE TPMS Sensors Set of 4 — OEM Black-Anodized Valve-Stems, Auto-Pair for Model 3\/Y\/S\/X","description":"\u003cp\u003e\u003cstrong\u003eSet of four genuine Tesla Bluetooth Low Energy tire-pressure sensors (PN 1490750-01-A) plus a T Sportline decal sheet—bolt them to your wheels and they automatically pair with compatible Tesla vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese are factory Tesla replacement BLE (Bluetooth Low Energy) TPMS sensors designed for Tesla vehicles produced from the listed dates. They arrive ready to install—no specialized tools, programming steps, or dealership visits are required when used in Teslas that originally shipped with BLE TPMS. Each kit includes four black-anodized valve-stem sensors and a T Sportline decal sheet so you can replace worn or damaged sensors quickly and keep accurate tire pressure monitoring.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these sensors work once installed in my Tesla?\u003c\/h3\u003e\n\n\u003cp\u003eAfter mounting the sensors on your wheel valves, the vehicle’s BLE TPMS receiver will discover them automatically and begin reporting tire pressures to the car’s display. There is no manual pairing or extra hardware necessary for Teslas that already use Bluetooth TPMS.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAutomatic BLE 2.4 GHz connection to compatible Tesla models\u003c\/li\u003e\n  \u003cli\u003eReads and reports tire pressure directly to your car’s onboard system\u003c\/li\u003e\n  \u003cli\u003eRated pressure capability up to 135 psi for high-performance or low-volume tires\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Tesla models and production dates are compatible?\u003c\/h3\u003e\n\n\u003cp\u003eThis OEM sensor set fits Tesla Model 3 and Model Y built from October 2020 onward, Model S from June 2021 onward, and Model X from October 2021 onward—specifically vehicles that shipped from factory with Bluetooth-based TPMS. If your vehicle originally used 433 MHz RF sensors, these BLE sensors will not be compatible.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eModel 3: Oct 2020 to present\u003c\/li\u003e\n  \u003cli\u003eModel Y: Oct 2020 to present\u003c\/li\u003e\n  \u003cli\u003eModel S: Jun 2021 to present\u003c\/li\u003e\n  \u003cli\u003eModel X: Oct 2021 to present\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the technical highlights and installation notes?\u003c\/h3\u003e\n\n\u003cp\u003eThese are genuine Tesla-manufactured sensors (part number 1490750-01-A) that communicate over Bluetooth Low Energy at 2.4 GHz and support pressures up to 135 psi. The valve stems are black-anodized for corrosion resistance and factory appearance; installation follows standard tubeless wheel sensor replacement procedures.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTesla OEM part PN: 1490750-01-A (set of 4)\u003c\/li\u003e\n  \u003cli\u003eBluetooth Low Energy (BLE) 2.4 GHz radio\u003c\/li\u003e\n  \u003cli\u003ePressure range: up to 135 psi\u003c\/li\u003e\n  \u003cli\u003eBlack-anodized valve stems for durability and OEM look\u003c\/li\u003e\n  \u003cli\u003eIncludes a T Sportline decal sheet for personalization\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need any tools, programming, or dealer support?\u003c\/h3\u003e\n\n\u003cp\u003eNo special programming is required for Teslas that were factory-equipped with BLE TPMS; install the sensors and the car will automatically recognize them. Standard tire-mounting tools or a professional tire shop are recommended for safe, leak-free installation and proper valve stem torque.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePlug-and-play for compatible Tesla vehicles—no manual pairing\u003c\/li\u003e\n  \u003cli\u003eProfessional tire shop recommended for mounting and leak testing\u003c\/li\u003e\n  \u003cli\u003eNot compatible with older 433 MHz RF-based TPMS systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Tesla OEM BLE TPMS kit is intended for Tesla owners who need direct factory replacements for lost, damaged, or aging Bluetooth TPMS sensors—especially owners of Model 3, Model Y, Model S, and Model X produced on or after the dates listed above. It’s ideal for DIYers comfortable with wheel work as well as for technicians who prefer genuine Tesla parts and a plug-and-play experience without dealer reprogramming.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these sensors work without programming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—on Teslas originally equipped with Bluetooth TPMS the sensors pair automatically after installation; no manual programming is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these compatible with older 433 MHz TPMS systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—these are BLE (2.4 GHz) sensors and do not work with Tesla vehicles that use 433 MHz RF TPMS.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"T Sportline","offers":[{"title":"Default Title","offer_id":67585131643065,"sku":"B0BTRS2C8G","price":261.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/t-sportline-tesla-tpms-front-packaging.jpg?v=1790468415"},{"product_id":"b-qtech-rv-tire-pressure-monitoring-system-tpms-8-sensors-0-108-psi-3-15-hd-display","title":"B-Qtech RV Tire Pressure Monitoring System TPMS — 8 Sensors, 0–108 PSI, 3.15\" HD Display","description":"\u003cp\u003e\u003cstrong\u003eThe B-Qtech RV Tire Pressure Monitoring System is an 8-sensor TPMS that provides real-time tire pressure and temperature monitoring for RVs, trailers, trucks, and cars within a 0–108 PSI range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for long hauls and weekend getaways, this TPMS pairs a bright 3.15-inch HD color display with durable, IP67-rated sensors to deliver clear, continuous tire data up to 98 feet away. It offers configurable alerts, a rechargeable display battery, tool-free sensor maintenance, and support for mixed vehicle and trailer setups so you can monitor up to 10 tires including spares.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will I see warnings if a tire changes pressure or temperature?\u003c\/h3\u003e\n\u003cp\u003eThe system delivers fast visual, audible, and text alerts as soon as a sensor detects pressure loss, pressure spike, or temperature rise. Alerts are immediate and persistent so you can stop and inspect before small issues become bigger problems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time monitoring with instant alarm notifications\u003c\/li\u003e\n  \u003cli\u003eVisual, auditory, and on-screen text warnings\u003c\/li\u003e\n  \u003cli\u003eAdjustable alarm thresholds to suit load and road conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and power options does the display use?\u003c\/h3\u003e\n\u003cp\u003eThe monitor uses a 3.15-inch high-resolution color LCD for easy readouts day or night, and it runs on a built-in 1000mAh rechargeable battery charged via USB-C. A magnetic mount makes it fast to install or remove without cluttering your dash.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e3.15\" HD color screen for clear numbers and icons\u003c\/li\u003e\n  \u003cli\u003e1000mAh rechargeable battery with USB-C charging\u003c\/li\u003e\n  \u003cli\u003eMagnetic mount for simple, non-permanent placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre the sensors durable and easy to maintain?\u003c\/h3\u003e\n\u003cp\u003eSensors are built with weather-resistant IP67 protection and feature anti-theft design and replaceable CR1632 batteries that swap out without tools. That combination keeps sensors working through rain, mud, and road grime while minimizing downtime and service costs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIP67 waterproof and dustproof rating for rugged use\u003c\/li\u003e\n  \u003cli\u003eTool-free CR1632 battery replacement for low maintenance\u003c\/li\u003e\n  \u003cli\u003eAnti-theft protection to secure sensors on public stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this system handle towing or multiple vehicles and spares?\u003c\/h3\u003e\n\u003cp\u003eYes — the monitor supports up to 10 sensors so you can track a vehicle plus trailer, RV, or extra spares. Switchable 4-wheel and 8-wheel modes cut down false alerts when you’re driving solo, and fully configurable sensor assignment fits complex rigs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMonitor up to 10 sensors (vehicle, trailer, spares)\u003c\/li\u003e\n  \u003cli\u003e4-wheel and 8-wheel modes for accurate alerting\u003c\/li\u003e\n  \u003cli\u003eCustomizable pressure and temperature thresholds per tire\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The B-Qtech RV TPMS is aimed at RV owners, tow vehicle drivers, commercial light-truck operators, and anyone who tows trailers or carries spare tires and wants continuous, adjustable tire monitoring. It’s especially useful for people who need robust, weatherproof sensors, a rechargeable display with a clear color screen, and a system that adapts between single-vehicle and towing setups without complicated installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What PSI range does the B-Qtech TPMS support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It monitors tire pressure from 0 to 108 PSI, suitable for cars, trucks, RVs and trailers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many tires can the system monitor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The system accepts up to 10 sensors and can operate in 4-wheel or 8-wheel modes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"B-Qtech","offers":[{"title":"Default Title","offer_id":67585135739065,"sku":"B0F9NKBR3S","price":271.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/b-qtech-front-display.jpg?v=1790468640"},{"product_id":"tireminder-i10-rv-tire-pressure-monitoring-system-10-transmitters-color-display-signal-booster","title":"TireMinder i10 RV Tire Pressure Monitoring System — 10 Transmitters, Color Display \u0026 Signal Booster","description":"\u003cp\u003e\u003cstrong\u003eThe TireMinder i10 is a full-color RV tire-pressure monitoring system that displays real-time pressure and temperature for up to 10 tires at once and supports swapping among four vehicles for coverage of up to 40 tires.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe i10 combines a bright, easy-to-read color display with 10 wireless transmitters and an included signal booster, giving RV owners continuous visibility into tire conditions for towing and towed vehicles. It’s engineered to show up to 20 tires per vehicle profile and lets you register four separate vehicle profiles so you can monitor different rigs without buying multiple systems. The compact sensors mount on valve stems and send pressure and temperature data to the handheld color monitor, reducing the need for manual checks on long trips.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the i10 monitor multiple vehicles and tires?\u003c\/h3\u003e\n\u003cp\u003eThe i10 supports four distinct vehicle profiles, each able to track up to 20 tires, and the system stores data so you can switch between setups quickly. When monitoring a tow vehicle and a towed unit simultaneously, the display will automatically alternate views so you can see both front and rear axle information without manual toggling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports 4 vehicle profiles (up to 20 tires each)\u003c\/li\u003e\n  \u003cli\u003eDisplays up to 10 tires on-screen at once\u003c\/li\u003e\n  \u003cli\u003eAutomatic front\/rear swapping for towing setups\u003c\/li\u003e\n  \u003cli\u003eStored profiles let you reuse configurations for different rigs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do the 10 transmitters and signal booster provide?\u003c\/h3\u003e\n\u003cp\u003eThe package includes 10 tire sensors that battery-power and transmit pressure and temperature to the monitor, plus a signal booster to extend range and reliability when monitoring a larger RV and trailer combination. That combination helps maintain a consistent wireless connection, especially when the monitor is inside a motorhome and sensors are on an attached trailer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 wireless transmitters included for immediate setup\u003c\/li\u003e\n  \u003cli\u003eSignal booster enhances reception through larger vehicles\u003c\/li\u003e\n  \u003cli\u003eBattery-powered, low-profile valve-stem sensors\u003c\/li\u003e\n  \u003cli\u003eDesigned for stable transmission over towing distances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the i10 to install and use on the road?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: screw the transmitters onto each valve stem, register them to the monitor, and save the vehicle profile. The color display presents pressure and temperature with visual alerts, so you can scan tire status at a glance while parked or preparing to drive.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple screw-on sensors fit standard valve stems\u003c\/li\u003e\n  \u003cli\u003eColor handheld monitor with clear numerical readouts and icons\u003c\/li\u003e\n  \u003cli\u003eQuick sensor registration and profile storage\u003c\/li\u003e\n  \u003cli\u003eVisual and audio alerts for out-of-range readings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the package dimensions, weight, and warranty details?\u003c\/h3\u003e\n\u003cp\u003eThe shipping package is compact enough for storage and comes with a three-year included coverage period. The full kit balances portability with durable components suitable for extended road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage dimensions: 24.4 H x 7.1 L x 18.6 W cm\u003c\/li\u003e\n  \u003cli\u003ePackage weight: 2.5 pounds for the complete kit\u003c\/li\u003e\n  \u003cli\u003eThree-year coverage included with purchase\u003c\/li\u003e\n  \u003cli\u003eManufactured in China with quality-tested components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The TireMinder i10 is built for RV owners, tow vehicle drivers and caravan enthusiasts who want continuous, color-coded tire information for multi-vehicle setups. If you tow trailers, haul multiple wheel positions, or switch between rigs frequently, the i10’s multi-profile support, included transmitters, and signal booster offer a convenient, moveable solution for keeping tire pressure and temperature visible and tracked during travel.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many tires can the i10 monitor at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The i10 shows up to 10 tires on its screen simultaneously and supports profiles for up to 20 tires per vehicle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are batteries and a signal booster included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit includes 10 battery-powered transmitters and a signal booster to improve range and reception.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TireMinder","offers":[{"title":"Default Title","offer_id":67585138622649,"sku":"B082QJJ6G5","price":1068.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tireminder-i10-front-monitor-display.jpg?v=1790468766"},{"product_id":"gearwrench-universal-programmable-rubber-tpms-sensor-4-pack-dual-frequency-315-433-mhz-fast-id-cloning","title":"GEARWRENCH Universal Programmable Rubber TPMS Sensor 4-Pack — Dual-Frequency 315\/433 MHz, Fast ID Cloning","description":"\u003cp\u003e\u003cstrong\u003eThe GEARWRENCH Universal Programmable Rubber TPMS Sensor 4-Pack (GWTPMSR4PK) is a dual-frequency, OE-level replacement sensor that programs in seconds and clones existing sensor IDs so most installs require no relearn.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a vehicle’s tire pressure monitoring system needs a fast, reliable replacement, technicians and DIYers want a sensor that fits widely, programs quickly, and communicates accurately. The GEARWRENCH GWTPMSR4PK is engineered to cover approximately 99% of vehicle applications worldwide, combining rubber hardware with dual-frequency electronics to support both 315 MHz and 433 MHz platforms. Designed specifically for use with GEARWRENCH TPMS programming and diagnostic tools, these sensors simplify service workflows and reduce time spent on relearn procedures.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly can these sensors be programmed and put into service?\u003c\/h3\u003e\n\u003cp\u003eThese sensors are built for speed: they program in seconds using any compatible GEARWRENCH TPMS tool and support 100% ID cloning so the vehicle’s ECU recognizes the replacement sensor without a manual relearn in many cases. That minimizes downtime and returns the vehicle to normal operation faster.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrograms with GEARWRENCH TPMS tools in seconds\u003c\/li\u003e\n\u003cli\u003e100% ID cloning mirrors the original sensor ID\u003c\/li\u003e\n\u003cli\u003eOften eliminates time-consuming ECU relearn procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and frequencies does this sensor support?\u003c\/h3\u003e\n\u003cp\u003eThe GWTPMSR4PK covers an extremely broad vehicle set—compatible with roughly 99% of cars and light trucks globally—because it supports the two primary TPMS frequencies. Dual-frequency capability lets a single sensor work on either 315 MHz or 433 MHz systems, reducing the number of part SKUs a shop needs to stock.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal fitment targeting ~99% of worldwide vehicles\u003c\/li\u003e\n\u003cli\u003eDual-frequency electronics: 315 MHz and 433 MHz\u003c\/li\u003e\n\u003cli\u003eIdeal for mixed fleets or shops serving international models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow accurate and durable are the readings compared with OE sensors?\u003c\/h3\u003e\n\u003cp\u003eGEARWRENCH designed these sensors to deliver OE-level pressure, temperature, and battery status reporting, ensuring the vehicle’s TPMS displays and alerts behave as expected. The rubber housing offers a durable seal and shock resistance suitable for routine driving conditions and shop service procedures.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered to match OE accuracy for pressure and temperature\u003c\/li\u003e\n\u003cli\u003eRubber construction provides a durable, corrosion-resistant seal\u003c\/li\u003e\n\u003cli\u003eBattery and signal performance aligned with factory standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and steps are required to install the GWTPMSR4PK?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward when paired with a GEARWRENCH TPMS programming or diagnostic tool. After mounting the sensor and inflating the tire to spec, use the tool to program or clone the sensor ID; many vehicles will accept the cloned ID without a separate ECU relearn step.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall sensor on valve stem, torque to vehicle specification\u003c\/li\u003e\n\u003cli\u003eUse a GEARWRENCH TPMS tool to program or clone the sensor ID\u003c\/li\u003e\n\u003cli\u003eInflate and inspect the assembly for leaks; perform any required vehicle relearn if prompted\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? The GEARWRENCH GWTPMSR4PK 4-pack is aimed at professional automotive shops, mobile technicians, and knowledgeable DIYers who service a variety of vehicle makes and models. It’s particularly useful for businesses that value reduced inventory complexity, faster service throughput, and dependable TPMS readings that align with OE behavior. If you need a universal, programmable sensor that streamlines TPMS replacement and integrates directly with GEARWRENCH programming tools, this 4-pack is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the GWTPMSR4PK replace any OEM sensor without relearn?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It supports 100% ID cloning so many installs require no relearn, but some vehicles may still require a relearn step.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which TPMS frequencies does this sensor support?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The sensor is dual-frequency and supports both 315 MHz and 433 MHz systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GEARWRENCH","offers":[{"title":"Default Title","offer_id":67585146192057,"sku":"B0GHZDNLVG","price":194.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gearwrench-front-packaging-tpms-sensors.jpg?v=1790468920"},{"product_id":"autel-maxitpms-ts501-pro-tpms-programmer-2026-upgrade-315-433mhz-mx-sensor-support-obd-relearn","title":"Autel MaxiTPMS TS501 PRO TPMS Programmer — 2026 Upgrade, 315\/433MHz MX-Sensor Support, OBD Relearn","description":"\u003cp\u003e\u003cstrong\u003eThe Autel MaxiTPMS TS501 PRO is a professional handheld TPMS programmer and diagnostics tool that programs Autel MX-sensors (315\/433MHz), activates and relearns nearly all vehicle sensors, and runs full TPMS health checks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe TS501 PRO is Autel's 2026 upgrade in the MaxiTPMS line, rebuilt for broader vehicle coverage, faster sensor programming, and more service options than earlier models. It combines on-tool sensor activation, multiple programming and relearn methods, OBD-based diagnostics, and lifetime software updates (registration required) into one compact device intended for technicians, DIYers, and mobile service providers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TS501 PRO program replacement MX-sensors?\u003c\/h3\u003e\n\u003cp\u003eThe unit programs Autel MX-sensors using four distinct workflows so you can match the replacement sensor to the vehicle quickly. Options include automatic bulk creation, sensor copying from an existing sensor, OBD copy, or manual ID input for flexibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAuto-create 1–16 sensor IDs at once for rapid multi-sensor programming.\u003c\/li\u003e\n  \u003cli\u003eCopy sensor IDs by activation or manual input when a working sensor is available.\u003c\/li\u003e\n  \u003cli\u003eCopy sensor IDs over the vehicle OBD port for fast transfer and accuracy.\u003c\/li\u003e\n  \u003cli\u003eSupports Autel MX-sensors at 315MHz and 433MHz frequencies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat relearn and activation methods are included?\u003c\/h3\u003e\n\u003cp\u003eTS501 PRO supports multiple relearn paths so you can clear the TPMS light and register new sensors to the vehicle regardless of make. On-tool relearn, automatic drive relearn, and an OBD relearn procedure cover both OE and aftermarket sensors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStationary, automatic, and OBD relearn procedures with step-by-step prompts.\u003c\/li\u003e\n  \u003cli\u003eWireless activation for OE and universal sensors to read ID, pressure, temperature, battery, and frequency.\u003c\/li\u003e\n  \u003cli\u003eAbility to read and copy sensor IDs into MX-Sensors directly from the tool.\u003c\/li\u003e\n  \u003cli\u003eOBD relearn includes guided procedures shown on-screen for many models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich diagnostic capabilities help pinpoint TPMS problems?\u003c\/h3\u003e\n\u003cp\u003eBeyond basic activation, the TS501 PRO performs a one-step system health check, reads and clears TPMS-specific DTCs, and explains codes on-screen to speed repair decisions. It also logs data for review and printing, making documentation simple.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete TPMS health scan that finds faulty sensors and systemic issues.\u003c\/li\u003e\n  \u003cli\u003eRead and clear TPMS DTCs with on-screen descriptions to guide repairs.\u003c\/li\u003e\n  \u003cli\u003eFrequency testing and sensor parameter readouts (ID, pressure, temp, battery).\u003c\/li\u003e\n  \u003cli\u003eData review and printable diagnostic reports for shop records.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the TS501 PRO different from older models like the TS408 or TS401?\u003c\/h3\u003e\n\u003cp\u003eThe 2026 TS501 PRO adds OBD-based ID reading\/copying, full system health checks, on-tool relearn options, tire type\/pressure selection, and wider vehicle support compared with earlier models. These additions make it more capable for professional TPMS service tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOBD read\/copy of sensor IDs — not available on TS408\/TS401.\u003c\/li\u003e\n  \u003cli\u003eOne-step comprehensive TPMS health diagnostics and DTC handling.\u003c\/li\u003e\n  \u003cli\u003eTire type and pressure selection to clear residual MIL after repairs.\u003c\/li\u003e\n  \u003cli\u003eLifetime updates to expand vehicle coverage and features (registration required).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Autel MaxiTPMS TS501 PRO is aimed at automotive technicians, independent tire shops, fleet maintenance teams, and informed DIYers who need reliable TPMS programming, activation, and diagnostic capability in the field or the shop. If you replace sensors, service TPMS regularly, or require printable diagnostic records, the TS501 PRO centralizes these functions in one tool. Note: register and update the tool via PC before extended use; unregistered units allow limited activations.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does TS501 PRO work with non-Autel sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: TS501 PRO can activate and read most OEM and universal sensors, but programming MX-sensors is limited to Autel MX models. Check compatibility before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are software updates included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — lifetime updates are provided, but you must register and update the unit via PC to unlock full functionality.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67585164411065,"sku":"B00BHCFNTS","price":486.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-ts501pro-front-view.jpg?v=1790469255"},{"product_id":"guta-gt80-rv-tire-pressure-monitoring-system-10-sensor-tpms-kit-4-3-color-touchscreen-0-188-psi","title":"GUTA GT80 RV Tire Pressure Monitoring System — 10-Sensor TPMS Kit, 4.3\" Color Touchscreen, 0–188 PSI","description":"\u003cp\u003e\u003cstrong\u003eThe GUTA GT80 RV Tire Pressure Monitoring System is a 10-sensor kit with a 4.3-inch color touchscreen that monitors pressure (0–188 PSI) and temperature for large rigs in real time.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for RVs, trailers, tow vehicles and pickup setups, the GT80 delivers continuous tire data across multiple axles so you can spot pressure drops, overheating or sensor issues before they escalate. The system combines a bright full-color touch display, long-range wireless transmission and factory-paired external sensors to make installation fast and monitoring straightforward for owners who haul people or cargo over long distances.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the GT80 show tire data while I’m driving?\u003c\/h3\u003e\n\u003cp\u003eThe GT80 uses a 4.3-inch full-color touchscreen to present pressure and temperature for up to 22 tires across multiple vehicle types. The display is touch-enabled for quick navigation and supports clear visual and audible alarms when values fall outside your set thresholds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReal-time pressure range: 0–188 PSI; temperature up to 185 °F.\u003c\/li\u003e\n  \u003cli\u003eSingle-page view can present up to 22 tires for easy scanning.\u003c\/li\u003e\n  \u003cli\u003eBright color LCD for daytime visibility and intuitive touch controls.\u003c\/li\u003e\n  \u003cli\u003eSix alarm modes (high\/low pressure, high temp, rapid leak, missing signal, low sensor battery).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes setup and pairing so quick?\u003c\/h3\u003e\n\u003cp\u003eEach sensor in this package arrives pre-labeled and linked to the monitor at the factory, so you don’t need to manually pair sensors during installation. The system also allows you to adopt current tire pressure as the baseline reference, simplifying alarm threshold configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-paired sensors for plug-and-play monitoring right after mounting.\u003c\/li\u003e\n  \u003cli\u003eAuto-reference: sets current pressure as the initial baseline for alarms.\u003c\/li\u003e\n  \u003cli\u003eUnit options: switch between PSI\/BAR and °F\/°C for regional preference.\u003c\/li\u003e\n  \u003cli\u003eUser-friendly touch menu for customizing alarm limits (+25% to −15% range from reference).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the signal reach across my trailer or fifth wheel?\u003c\/h3\u003e\n\u003cp\u003eThe GT80 is built with a boosted transmitter to maintain stable data up to about 164 feet in open conditions, which suits most RV and trailer combinations. For very long towed setups (total length ≥ 40 ft) the system supports an optional repeater to ensure consistent reception from remote axles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLong-range transmission designed for RVs, trailers and tow vehicles.\u003c\/li\u003e\n  \u003cli\u003eSwitchable vehicle profiles to monitor different rig configurations.\u003c\/li\u003e\n  \u003cli\u003eRecommended repeater usage for trailers 40 ft or longer to maintain signal strength.\u003c\/li\u003e\n  \u003cli\u003eReal-time updates help detect fast leaks and overheating promptly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the GT80 help reduce maintenance fuss?\u003c\/h3\u003e\n\u003cp\u003eThe monitor includes power-saving behavior and firmware update support to minimize manual upkeep. It enters a low-power state when no motion is detected and resumes automatically with vibration, while periodic firmware updates from GUTA keep the system current.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic sleep after 10 minutes without vibration to conserve power.\u003c\/li\u003e\n  \u003cli\u003eAuto-wake on motion so the display is ready when you start moving.\u003c\/li\u003e\n  \u003cli\u003eLow battery alerts for individual sensors to plan replacements in advance.\u003c\/li\u003e\n  \u003cli\u003eFirmware updates available on the GUTA site and customer support from GUTA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: the GUTA GT80 is aimed at RV owners, professional haulers and anyone who tows multi-axle trailers and wants continuous, easy-to-read tire monitoring. If you need a durable, user-friendly system with long-range transmission, pre-paired sensors and flexible alarm settings to cover large vehicles and trailers, the GT80 offers a comprehensive package. Consider adding the recommended repeater for very long trailers to maintain signal integrity across all axles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the GT80 sensors come pre-paired with the monitor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — all ten sensors are factory-paired to the GT80 monitor so installation requires no manual pairing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the wireless range and do I need extras for long trailers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typical range is up to 164 feet; for trailers 40 ft or longer GUTA recommends using a repeater for reliable reception.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GUTA","offers":[{"title":"Default Title","offer_id":67585450115257,"sku":"B0F8QJKK3G","price":676.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/guta-gt80-front-display.jpg?v=1790470661"},{"product_id":"xtra-seal-programmable-multi-frequency-universal-tpms-sensors-clamp-in-box-of-10","title":"Xtra-Seal Programmable Multi‑Frequency Universal TPMS Sensors — Clamp‑In, Box of 10","description":"\u003cp\u003e\u003cstrong\u003eXtra-Seal Smart Sensor 17-43042 is a programmable, clamp‑in universal TPMS sensor in a bulk box of 10 designed to replace and reprogram tire pressure monitoring units across multiple vehicle platforms.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Xtra-Seal clamp‑in sensors combine multi‑frequency compatibility with programmable functionality to give repair shops and fleet managers a flexible, cost‑effective option for tire pressure monitoring system (TPMS) service and replacement. Each sensor is preconfigured to support a wide range of protocols and can be programmed to match the vehicle’s required frequency and ID settings using standard TPMS tools. Supplied in a box of 10, they streamline inventory management while reducing per‑unit cost compared with single purchases.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and frequencies does this sensor support?\u003c\/h3\u003e\n\u003cp\u003eThe Xtra-Seal Smart Sensor 17-43042 is built for universal coverage across common North American and global TPMS frequencies. It supports multiple transmission bands and can be programmed to emulate many OE sensor IDs and protocols, making it suitable for cars, SUVs, light trucks, and many aftermarket wheels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti‑frequency transmission for broad vehicle compatibility\u003c\/li\u003e\n  \u003cli\u003eProgrammable IDs to mimic original equipment sensors\u003c\/li\u003e\n  \u003cli\u003eWorks with mainstream TPMS relearn and diagnostic tools\u003c\/li\u003e\n  \u003cli\u003eClamp‑in form factor fits standard valve stems used by many manufacturers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and program these clamp‑in sensors?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows conventional clamp‑in procedures: remove the old core, fit the new sensor to the valve, torque to spec, then program using a compatible TPMS tool. Programming is typically a quick process that writes the proper frequency and sensor ID so the vehicle’s ECU recognizes the unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple clamp‑in installation — no adhesives or special presses required\u003c\/li\u003e\n  \u003cli\u003eRequires a TPMS programming\/scanning tool to set frequency and ID\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle manufacturer relearn steps after programming\u003c\/li\u003e\n  \u003cli\u003eTest with a TPMS tool to confirm transmission and battery health\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and maintenance considerations?\u003c\/h3\u003e\n\u003cp\u003eThese sensors are designed for workshop use and routine road conditions; however, proper installation and torque, as well as valve core condition, affect longevity. The clamp‑in construction allows valve replacement if damaged, and periodic testing verifies continued operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSealed electronics to resist typical road moisture and debris\u003c\/li\u003e\n  \u003cli\u003eReplace valve or core when corroded to prevent leaks\u003c\/li\u003e\n  \u003cli\u003eBattery life depends on transmission frequency and vehicle usage\u003c\/li\u003e\n  \u003cli\u003eStore sealed boxes in a dry, temperature‑stable environment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The Xtra-Seal Smart Sensor 17-43042 (box of 10) is intended for independent tire shops, service centers, fleet operators, and DIY enthusiasts who handle multiple TPMS repairs and need a reliable, programmable clamp‑in solution. If you manage inventory across diverse vehicles or want a cost‑effective way to stock universal sensors that can be tuned to specific models, this bulk pack reduces time spent ordering individual parts and keeps replacements on hand for fast turnaround. For single‑vehicle owners, consider purchasing through a retailer that offers smaller quantities unless you frequently perform TPMS service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these Xtra-Seal sensors compatible with my vehicle's TPMS?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They support multiple frequencies and programmable IDs; use a TPMS scan tool to confirm and program compatibility for your specific vehicle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these clamp‑in sensors come pre‑programmed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They are programmable, not universally pre‑programmed; you must set frequency and ID with a compatible TPMS tool during installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Xtra-Seal","offers":[{"title":"Default Title","offer_id":67585450672313,"sku":"B07HT8QP5M","price":411.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/xtra-seal-smart-sensor-front-packaging.jpg?v=1790470675"},{"product_id":"tst-truck-system-technologies-tpms-2-flow-thru-metal-valve-sensors-real-time-pressure-temperature","title":"TST TRUCK SYSTEM TECHNOLOGIES TPMS 2 Flow‑Thru Metal Valve Sensors — Real‑Time Pressure \u0026 Temperature","description":"\u003cp\u003e\u003cstrong\u003eThe TST 507 is a dual-sensor Tire Pressure Monitoring System with flow‑thru metal valve sensors designed to give caravan, motorhome and campervan owners continuous, on-road tyre pressure and temperature insight.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eInstalled on metal valve stems, the TST 507 uses two exterior flow‑thru sensors to transmit real‑time tyre pressure and temperature data to a compatible display or receiver. The system helps drivers notice slow leaks, rapid pressure loss or abnormal heat build-up so they can address issues before they complicate a trip. Sensors are built for heavy‑duty use and repeated mounting on metal valve stems common to caravans and larger recreational vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TST 507 install on metal valve stems?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: remove the factory cap, thread the flow‑thru sensor onto the metal valve stem and hand‑tighten. The design allows air to be added or adjusted without removing the sensor assembly, preserving convenience during roadside inflation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlow‑thru threading fits standard metal valve stems used on caravans and motorhomes\u003c\/li\u003e\n  \u003cli\u003eHand‑tighten seal with included torque instructions to prevent leaks\u003c\/li\u003e\n  \u003cli\u003eAllows inflation while sensors remain attached for quick tyre pressure correction\u003c\/li\u003e\n  \u003cli\u003eCompact sensor body minimises exposure to wheel debris and impacts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat real‑time data will I see and why does it matter?\u003c\/h3\u003e\n\u003cp\u003eThe TST 507 reports tyre pressure and temperature for each fitted wheel, delivering continuous feedback that helps spot issues early. Stable pressure improves handling and fuel efficiency; tracking temperature can indicate bearing or brake-related heat before component damage occurs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLive tyre pressure readouts for accurate inflation monitoring\u003c\/li\u003e\n  \u003cli\u003eTemperature monitoring to identify excessive heat trends\u003c\/li\u003e\n  \u003cli\u003eAlerts for rapid deflation or pressure thresholds you set on the receiver\u003c\/li\u003e\n  \u003cli\u003eData transmission suited to caravan and motorhome driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are the flow‑thru sensors for long trips and varying weather?\u003c\/h3\u003e\n\u003cp\u003eTST designed the 507 sensors for the rigours of recreational vehicle use, with materials and seals that resist moisture, road salt and vibration. Their flow‑thru form factor protects the valve interface while allowing normal servicing of tyre pressure at stops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust housing built for long‑distance touring and repeated use\u003c\/li\u003e\n  \u003cli\u003eSeals engineered for wet and cold conditions common to road travel\u003c\/li\u003e\n  \u003cli\u003eResistant to wheel vibration and common environmental contaminants\u003c\/li\u003e\n  \u003cli\u003eReplacement parts and guidance available from Truck System Technologies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich display or receiver works with the TST 507 sensors?\u003c\/h3\u003e\n\u003cp\u003eTST 507 sensors are compatible with Truck System Technologies receivers and displays that support their transmission protocol. Confirm compatibility with your TST display model or consult product documentation before purchase to ensure seamless pairing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePairs with TST receivers designed for two external sensors\u003c\/li\u003e\n  \u003cli\u003eCheck firmware versions and pairing steps in the manual for quick setup\u003c\/li\u003e\n  \u003cli\u003eSome third‑party receivers may require protocol matching—verify beforehand\u003c\/li\u003e\n  \u003cli\u003eReplacement or expansion options available from the brand for multi‑wheel setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The TST 507 is aimed at caravan, motorhome and campervan owners who prefer metal valve stems and want a durable, in‑use monitoring solution that stays mounted while refilling tyres. It suits travellers who value continuous tyre condition visibility during long journeys, DIY installers comfortable hand‑fitting valve sensors, and fleet operators wanting simple, replaceable sensors for recreational vehicles. For full compatibility and installation guidance, consult Truck System Technologies resources or contact an authorised installer.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I inflate tyres without removing the TST 507 sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The flow‑thru design allows you to add air with the sensors installed, so tyre adjustments are quick and hassle‑free.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sensors compatible with all TST displays?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They work with most Truck System Technologies receivers that support the sensor protocol; check your display model for confirmed compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TST TRUCK SYSTEM TECHNOLOGIES","offers":[{"title":"Default Title","offer_id":67585477214393,"sku":"B07L8JK8WM","price":242.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/tst-507-front-view-sensors.jpg?v=1790471094"},{"product_id":"xtool-tp300-tpms-programmer-obd2-scanner-handheld-tpms-programming-tool-with-5-45-hd-touchscreen-multi-system-diagnostics","title":"XTOOL TP300 TPMS Programmer \u0026 OBD2 Scanner — Handheld TPMS programming tool with 5.45\" HD touchscreen, multi-system diagnostics","description":"\u003cp\u003e\u003cstrong\u003eThe XTOOL TP300 is a handheld TPMS programmer and multi-system OBD2 scanner that combines tire pressure sensor activation, ID programming and relearn procedures with engine, ABS, SRS and transmission diagnostics in one tablet-style unit.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for tire shops, independent garages, mobile technicians and capable DIYers, the TP300 brings TPMS service and broad vehicle diagnostics into a single portable device. It supports programming and cloning of XTOOL TS100 sensors, reads and clears trouble codes across five major systems, shows live OBD2 data, and stores service records locally with WiFi update support. The tool aims to reduce trips to specialist shops by centralizing common tire and ECU tasks during replacements, rotations or troubleshooting sessions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the TP300 handle TPMS sensor programming and relearn?\u003c\/h3\u003e\n\n\u003cp\u003eThe TP300 offers multiple programming paths so you can create, copy or clone sensor IDs and complete relearn steps that match the vehicle’s ECU. It supports both OEM and many universal 315\/433MHz sensors and guides you through activation and relearn with on-screen prompts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFour programming methods: Auto ID Generation, Manual ID Entry, Copy ID via Activation, Copy ID via OBD.\u003c\/li\u003e\n  \u003cli\u003eSupports XTOOL TS100 pre-programmed sensors and many OE sensors at common TPMS frequencies.\u003c\/li\u003e\n  \u003cli\u003eFour relearn modes: Automatic, OBD, Stationary and Copy Sensors for flexible workshop workflows.\u003c\/li\u003e\n  \u003cli\u003eDisplays sensor ID, battery, pressure and temperature where available for verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat diagnostic systems and OBD2 functions does it cover?\u003c\/h3\u003e\n\n\u003cp\u003eBeyond TPMS, the TP300 reads and clears fault codes for Engine, ABS, SRS and Transmission systems and provides ten standard OBD2 functions for deeper inspection. Live data streaming and a built-in DTC library help isolate issues faster and create shareable reports for customers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFive-system diagnostics: TPMS, Engine, ABS, SRS, Transmission.\u003c\/li\u003e\n  \u003cli\u003eTen OBD2 functions including live data PIDs with graphing and Auto VIN recognition.\u003c\/li\u003e\n  \u003cli\u003eEight hot service functions such as Oil Reset, EPB Reset, Throttle Body Relearn, SAS Calibration.\u003c\/li\u003e\n  \u003cli\u003eSaveable reports and built-in error code library for clearer troubleshooting and documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and connectivity make the TP300 practical in a workshop?\u003c\/h3\u003e\n\n\u003cp\u003eThe TP300 is designed for reliable daily use with a 5.45\" HD touchscreen, quad-core processor and a long-lasting battery. Built-in WiFi VCI, dual-band networking and 64GB of storage keep software current and let you store service records, while wireless range supports mobile service jobs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e5.45\" high-definition touchscreen with responsive interface and 1.8GHz quad-core CPU.\u003c\/li\u003e\n  \u003cli\u003e4500mAh battery for extended sessions and dual-band WiFi (2.4\/5GHz) for fast updates.\u003c\/li\u003e\n  \u003cli\u003e64GB internal storage with expandable memory for diagnostic logs and reports.\u003c\/li\u003e\n  \u003cli\u003eWireless VCI reach up to about 33 feet to support roadside or lift-based work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the TP300 speed up routine TPMS and tire services?\u003c\/h3\u003e\n\n\u003cp\u003eBy consolidating activation, programming and relearn steps with diagnostic routines, the TP300 reduces tool changes and workshop downtime during tire swaps or sensor replacements. Step-by-step guidance and instant sensor activation help technicians finish jobs faster and verify results on the spot.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstant activation of compatible TPMS sensors to verify sensor wake-up and battery status.\u003c\/li\u003e\n  \u003cli\u003eGuided relearn processes to reset ECU recognition after rotations or sensor swaps.\u003c\/li\u003e\n  \u003cli\u003eGenerate and export reports for customer records or warranty filings.\u003c\/li\u003e\n  \u003cli\u003eLifetime free updates via WiFi keep vehicle coverage current without subscription fees.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The XTOOL TP300 suits tire shops, independent repair centers, mobile technicians and advanced DIYers who need a single compact instrument for TPMS programming plus multi-system diagnostics. If you frequently change sensors, perform TPMS relearns or diagnose codes across Engine\/ABS\/SRS\/Transmission systems, the TP300 reduces trips between tools and streamlines service workflows; check vehicle and sensor compatibility before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the TP300 program XTOOL TS100 sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The TP300 supports four programming methods for XTOOL TS100 sensors including auto generation and OBD copy for quick ID matching.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the TP300 read and clear non-TPMS fault codes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It diagnoses Engine, ABS, SRS and Transmission systems and offers ten OBD2 functions with live data streaming.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"XTOOL","offers":[{"title":"Default Title","offer_id":67585479540921,"sku":"B0GLH6RFFJ","price":479.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/xtool-tp300-front-display.jpg?v=1790471185"},{"product_id":"autel-tpms-1-sensor-universal-programmable-tpms-sensors-20-pack-black-dual-frequency-press-in-valve","title":"Autel TPMS 1-Sensor Universal Programmable TPMS Sensors, 20-Pack Black — Dual-Frequency Press-In Valve","description":"\u003cp\u003e\u003cstrong\u003eAutel 1-Sensor bulk box contains 20 individually sealed, programmable universal TPMS sensors with press-in rubber valve stems compatible with 315MHz and 433MHz systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you need a ready supply of reliable tire-pressure monitoring sensors for a shop or fleet, this Autel MX-Sensor 1-Sensor bulk kit delivers twenty reprogrammable units, each in its own bag to protect against contamination and ease inventory control. These sensors support both common TPMS frequencies and accept interchangeable rubber or metal valve stems, with replacement stems sold separately. Built to SAE J1205 and J1206 guidelines and designed for wide compatibility, the package helps technicians swap or program sensors quickly during servicing.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors work across different vehicles?\u003c\/h3\u003e\n\u003cp\u003eThe Autel 1-Sensor uses a universal programmable platform that can emulate many OE sensor IDs and broadcasts on both 315MHz and 433MHz frequencies. Technicians program the sensor to match the vehicle’s expected ID and frequency, enabling it to communicate with the vehicle’s TPMS receiver. This approach reduces the need to stock multiple OE-specific sensors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProgrammable to reproduce OE sensor IDs for 98% compatibility\u003c\/li\u003e\n  \u003cli\u003eDual-frequency support: 315MHz and 433MHz\u003c\/li\u003e\n  \u003cli\u003eWorks with vehicles requiring press-in rubber or metal valve stems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes installation and maintenance easier for shops?\u003c\/h3\u003e\n\u003cp\u003eEach sensor arrives individually bagged to prevent dirt or moisture exposure before installation. The press-release design allows the valve stem to be swapped from rubber to metal quickly, and replacement stems can be purchased separately to match specific vehicle requirements. The sensors use automotive-grade batteries and high-precision valve components to minimize post-installation issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIndividually sealed packaging for cleaner handling and inventory\u003c\/li\u003e\n  \u003cli\u003ePress-in valve with replaceable stem speeds field conversions\u003c\/li\u003e\n  \u003cli\u003eAutomotive-grade battery and precision valve reduce service callbacks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these sensors durable and compliant with industry standards?\u003c\/h3\u003e\n\u003cp\u003eYes — the sensors are built with corrosion-resistant valve components and meet key SAE standards for TPMS performance. The anodized valve stem option helps resist corrosion, while the high-precision air valve design reduces leak risk. These qualities help ensure reliable operation across temperature and weather extremes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeets SAE J1205 and J1206 standards\u003c\/li\u003e\n  \u003cli\u003eAnodized replaceable valve stem for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eDesigned for severe weather with automotive-grade battery chemistry\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I handle programming and replacement parts?\u003c\/h3\u003e\n\u003cp\u003eProgramming is performed with a compatible TPMS tool or Autel diagnostics to set the correct ID and frequency for each vehicle. Replacement valve stems—either rubber or metal—are available separately to match service needs, and the press-release feature simplifies stem swaps without removing the sensor body. Keep a programming tool and a small stock of replacement stems handy for quick turnarounds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProgram sensors using standard TPMS activation tools or Autel devices\u003c\/li\u003e\n  \u003cli\u003eReplace valve stems without changing the entire sensor housing\u003c\/li\u003e\n  \u003cli\u003eReplacement rubber and metal stems sold separately for flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Autel 1-Sensor bulk box is ideal for tire shops, dealerships, mobile technicians, and fleet maintenance teams that require a cost-efficient inventory of universal, reprogrammable TPMS sensors. It’s especially useful for operations that service many vehicle makes and models and need a reliable, weather-resistant sensor that can be converted between rubber and metal valve stems during maintenance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors support both 315MHz and 433MHz vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Autel 1-Sensor units are dual-frequency and can be programmed for either 315MHz or 433MHz systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I replace the valve stem without replacing the sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The press-release design allows swapping rubber or metal valve stems; replacement stems are sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67585490419897,"sku":"B07P5SYJWM","price":928.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-1-sensor-front-of-box.jpg?v=1790471579"},{"product_id":"autel-tpms-sensors-set-of-4-dual-frequency-315-433mhz-metal-press-in-wireless-programmable","title":"Autel TPMS Sensors Set of 4 — Dual‑Frequency 315\/433MHz Metal Press‑In, Wireless Programmable","description":"\u003cp\u003e\u003cstrong\u003eAutel MX TPMS sensor set (4-pack) is a single-SKU, dual-frequency press-in sensor engineered to replace OE units across most vehicles while offering wireless programming and robust signal strength.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Autel 1-Sensor MX units combine 315MHz and 433MHz channels into one compact metal-valve sensor that installs like an OE press-in part. Designed for professional shops and DIYers who use Autel MaxiTPMS tools, the MX sensors reduce inventory needs by covering the vast majority of passenger cars and light trucks. Built to SAE test standards, the sensors prioritize reliable battery life, lightweight construction, and fast wireless programming after wheel mounting.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the dual-frequency design simplify repairs?\u003c\/h3\u003e\n\n\u003cp\u003eThe MX sensor merges both common TPMS bands—315MHz and 433MHz—so a single sensor can serve vehicles requiring either frequency. That removes the need to stock multiple SKU variants and speeds up part selection during service. Programming and cloning capabilities further minimize vehicle-specific steps.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOne sensor handles both 315MHz and 433MHz vehicles\u003c\/li\u003e\n  \u003cli\u003eReduces parts inventory and stocking complexity\u003c\/li\u003e\n  \u003cli\u003eSupports ID cloning to avoid manual relearn in many cases\u003c\/li\u003e\n  \u003cli\u003ePress-in metal valve matches OE-style wheel inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these sensors be programmed while mounted on the wheel?\u003c\/h3\u003e\n\n\u003cp\u003eYes—the MX sensors are designed with strong radio output so Autel tools can program or clone them after they’re installed on the rim. This capability reduces repetitive removal and remount cycles and enables batch programming for multiple sensors at once.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh signal strength supports wireless programming on mounted wheels\u003c\/li\u003e\n  \u003cli\u003eCompatible with Autel MaxiTPMS wireless programming tools only\u003c\/li\u003e\n  \u003cli\u003eBatch programming options for efficient shop workflows\u003c\/li\u003e\n  \u003cli\u003e100% ID cloneable for many OE sensor replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the reliability and warranty features?\u003c\/h3\u003e\n\n\u003cp\u003eAutel MX sensors are manufactured to meet SAE J1205\/J1206 test standards and include serial identification for quality tracking. The lightweight design (about 11 g) helps stabilize the assembly and is claimed to provide battery life comparable to original equipment sensors. A limited warranty covers manufacturing defects for a defined period or mileage.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSAE-tested to J1205\/J1206 industry benchmarks\u003c\/li\u003e\n  \u003cli\u003eSerial number on each unit for traceability and QC\u003c\/li\u003e\n  \u003cli\u003e24-month or 24,000-mile limited warranty for defects\u003c\/li\u003e\n  \u003cli\u003eLightweight body for improved sensor stability and fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these sensors affect shop efficiency and cost?\u003c\/h3\u003e\n\n\u003cp\u003eBy consolidating most vehicle needs into a single programmable sensor, shops can lower their stocking overhead and speed up service cycles. The press-in metal valve and wireless programming cut bench time, while batch programming and cloning reduce repeated tool interactions per vehicle.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSingle-SKU coverage reduces distributor and shop inventory\u003c\/li\u003e\n  \u003cli\u003ePress-in installation minimizes labor on tire service jobs\u003c\/li\u003e\n  \u003cli\u003eWireless batch programming increases throughput\u003c\/li\u003e\n  \u003cli\u003eCloning avoids extra relearn procedures on many models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Autel MX TPMS sensors are aimed at automotive shops, tire centers, and technically equipped DIYers who use Autel MaxiTPMS programming tools and want a universal press-in metal-valve sensor solution. If you require OE-style performance, broad vehicle compatibility, and streamlined inventory, this 4-pack is built to replace many dedicated SKUs—just confirm vehicle compatibility with your Autel tool before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do Autel MX sensors work on both 315MHz and 433MHz vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each MX sensor supports both 315MHz and 433MHz frequencies, allowing one SKU to serve most TPMS-equipped vehicles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I program these sensors with any TPMS tool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. MX sensors require Autel MaxiTPMS wireless programming tools for cloning and programming.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67585507164345,"sku":"B0BHNYJ65R","price":234.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-mx-sensors-front-packaging.jpg?v=1790471664"},{"product_id":"autel-maxitpms-ts501-pro-tpms-programming-diagnostic-tool-2026-mx-sensor-support-obd-relearn","title":"Autel MaxiTPMS TS501 PRO TPMS Programming \u0026 Diagnostic Tool — 2026 MX‑Sensor Support, OBD Relearn","description":"\u003cb\u003eAutel MaxiTPMS TS501 PRO is a dedicated 2026 TPMS programming and diagnostic tool that activates and programs Autel MX-sensors, performs relearns, reads\/clears TPMS DTCs, and displays live sensor data.\u003c\/b\u003e\n\nThe TS501 PRO replaces older models (TS501\/TS508\/TS408S\/TS408\/TS401) with expanded coverage and added features tailored for professional technicians and advanced DIYers who work on modern TPMS systems. It supports Autel MX-sensors (315\/433 MHz) and provides lifetime software updates via USB after registration. Before full use, register the device and update the software; unregistered units are limited to ten uses.\n\n\u003ch3\u003eHow does the TS501 PRO program Autel MX-sensors?\u003c\/h3\u003e\n\u003cp\u003eThe TS501 PRO offers four distinct programming methods so you can match the workflow to the vehicle and sensor condition. Programming writes sensor data into Autel MX-sensors, enabling replacement sensors to behave like the originals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCopy by OBD — write sensor data directly to the MX-sensor through the vehicle OBD (not available on TS408).\u003c\/li\u003e\n  \u003cli\u003eAuto Create — automatically generate 1–16 sensor entries for bulk replacements.\u003c\/li\u003e\n  \u003cli\u003eManual Create — enter sensor parameters manually when needed.\u003c\/li\u003e\n  \u003cli\u003eCopy by Activation — capture an existing sensor’s ID then clone it to a new MX-sensor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this tool relearn and reset TPMS warning lights?\u003c\/h3\u003e\n\u003cp\u003eThe TS501 PRO supports multiple relearn procedures and can clear TPMS fault codes to turn off warning lights after repairs. It reads sensor IDs, pressure, temperature, battery level, position and frequency to confirm correct operation before resetting the system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStationary Relearn — relearn sensors without driving the vehicle.\u003c\/li\u003e\n  \u003cli\u003eAutomatic Relearn — easier method for compatible vehicles that relearn while driving.\u003c\/li\u003e\n  \u003cli\u003eOBD Relearn — write IDs to the ECU directly when supported (faster and reliable).\u003c\/li\u003e\n  \u003cli\u003eReads and clears TPMS DTCs to help identify and resolve system faults.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich sensors and vehicles will the TS501 PRO work with?\u003c\/h3\u003e\n\u003cp\u003eAutel’s TS501 PRO activates nearly all OE and aftermarket TPMS sensors to gather live data, but programming is limited to Autel MX-sensors only. For vehicle compatibility, supplying the make, year, model and full 17-digit VIN helps verify support before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSensor activation for most OE and aftermarket sensors — capture ID, pressure, temp, battery and frequency.\u003c\/li\u003e\n  \u003cli\u003eProgram Autel MX-sensors (315\/433 MHz) only — cannot program third-party brand sensors.\u003c\/li\u003e\n  \u003cli\u003eLifetime software updates expand coverage and add new vehicle profiles over time.\u003c\/li\u003e\n  \u003cli\u003eQuick diagnostics to determine whether a sensor or ECU setting needs attention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat diagnostics and service functions does it provide?\u003c\/h3\u003e\n\u003cp\u003eThe TS501 PRO functions as a full TPMS diagnostic device, displaying live sensor streams and allowing technicians to perform service functions that used to require multiple tools. It helps validate repairs by checking sensor battery health and confirming correct ID assignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRead live sensor data: pressure, temperature, battery level, position and frequency.\u003c\/li\u003e\n  \u003cli\u003eRead and clear TPMS-related DTCs and reset TPMS warning lights.\u003c\/li\u003e\n  \u003cli\u003eSelect tire type and target pressure values when a reset alone doesn’t clear lights.\u003c\/li\u003e\n  \u003cli\u003eFast button response and intuitive menus for shop workflows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThe Autel MaxiTPMS TS501 PRO is aimed at professional mechanics, tire shops, and knowledgeable vehicle owners who need a robust TPMS solution that combines programming, relearn functions, and diagnostics in one handheld device. It’s especially useful where Autel MX-sensors are the replacement choice and when shops want ongoing coverage through lifetime software updates and Autel technical support. Remember to register and update via PC to unlock full functionality and unlimited use.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the TS501 PRO program non-Autel sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The TS501 PRO can program only Autel MX-sensors (315\/433 MHz); it can activate most other brands but cannot write to them.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to register the device to use it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Register and update via PC to unlock unlimited uses and get lifetime software updates; unregistered units are limited to ten uses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Autel","offers":[{"title":"Default Title","offer_id":67585586430137,"sku":"B01LRJ7UD2","price":486.53,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/autel-ts501-pro-front-view.jpg?v=1790472969"},{"product_id":"cyvajive-bluetooth-tpms-sensors-for-tesla-model-3-y-s-x-4pcs-pre-programmed-0-72-psi-accuracy","title":"CyVaJive Bluetooth TPMS Sensors for Tesla Model 3\/Y\/S\/X 4PCS — Pre‑programmed, ±0.72 psi Accuracy","description":"\u003cp\u003e\u003cstrong\u003eThese four pre-programmed CyVaJive Bluetooth TPMS sensors replace factory units on Tesla Model 3, Y, S, and X (2020–2026) to restore real-time tire pressure and temperature reporting without extra programming tools.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen a Tesla’s tire-pressure monitoring system needs replacement, choosing compatible sensors that communicate reliably with the vehicle is essential. CyVaJive’s 4PCS Bluetooth TPMS kit is designed to match original equipment signals for the specified Tesla model years, offers ±0.72 psi pressure accuracy, and arrives pre-programmed so you can install and activate with minimal fuss. Built with a robust aluminum valve stem and low-power BLE chipset, these sensors aim to deliver multi-year operation across extreme temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Tesla models and years work with these CyVaJive sensors?\u003c\/h3\u003e\n\u003cp\u003eThe kit is engineered specifically for Tesla Model 3 and Model Y vehicles from October 2020 through 2026, plus Model X (from October 2021 through 2026) and Model S (from June 2021 through 2026). It replaces a long list of OE part numbers used by Tesla, ensuring direct compatibility for those factory TPMS profiles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eModel 3: Oct 2020–2026\u003c\/li\u003e\n  \u003cli\u003eModel Y: Oct 2020–2026\u003c\/li\u003e\n  \u003cli\u003eModel X: Oct 2021–2026\u003c\/li\u003e\n  \u003cli\u003eModel S: Jun 2021–2026\u003c\/li\u003e\n  \u003cli\u003eCompatible with multiple OE numbers for plug-and-play swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and setup for a DIYer?\u003c\/h3\u003e\n\u003cp\u003eThese sensors come pre-programmed so no external programming tools are required; simply mount each sensor on the wheel and allow the vehicle’s TPMS system to recognize them. For best results, remove the original sensors from the vehicle area after installation to prevent radio interference, then follow the car’s built-in TPMS activation or relearn process.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-programmed sensors: no special tools needed\u003c\/li\u003e\n  \u003cli\u003eInstall on valve stem, tighten, and reseal tire\u003c\/li\u003e\n  \u003cli\u003eActivate via Tesla’s onboard TPMS relearn procedure\u003c\/li\u003e\n  \u003cli\u003eRemove old sensors from vehicle vicinity to avoid signal conflicts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eCyVaJive uses a low-energy Bluetooth chip and a precision pressure sensor to provide real-time readings with about ±0.72 psi accuracy, plus temperature data. The sensor assembly is built with an upgraded aluminum valve stem and tested to withstand a wide temperature range, intended for reliable performance in everyday driving and harsher climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth Low Energy for stable, low-power signaling\u003c\/li\u003e\n  \u003cli\u003ePressure accuracy within ±0.72 psi\u003c\/li\u003e\n  \u003cli\u003eOperating range −40°F to 257°F (−40°C to 125°C)\u003c\/li\u003e\n  \u003cli\u003eRugged aluminum valve stem for long-term durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support are provided if something goes wrong?\u003c\/h3\u003e\n\u003cp\u003eCyVaJive backs these TPMS sensors with a 12-month warranty and lifetime technical support for installation and troubleshooting. The company performs quality tests before shipping and offers customer support with a stated response window to help resolve fitment or activation questions quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty included\u003c\/li\u003e\n  \u003cli\u003eLifetime technical support for setup and issues\u003c\/li\u003e\n  \u003cli\u003eQuality-tested units before shipment\u003c\/li\u003e\n  \u003cli\u003ePackaging may vary but product and fit remain consistent\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers of Tesla Model 3, Model Y, Model S, or Model X within the listed model years who need a direct-replacement TPMS solution that’s pre-programmed and designed to match OE signals. This kit suits owners who want a quick DIY swap without programming tools, fleet managers replacing multiple sensors, or technicians looking for an OE-replacement alternative backed by warranty and support. Before ordering, confirm your vehicle’s model year and OE numbers for guaranteed fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors require programming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the CyVaJive sensors come pre-programmed for compatible Tesla models and typically need only installation and vehicle activation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these work on my 2022 Model Y?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit supports Model Y vehicles from October 2020 through 2026 when matching OE numbers listed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CyVaJive","offers":[{"title":"Default Title","offer_id":67585592819897,"sku":"B0GCD9PR6L","price":194.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/cyvajive-front-packaging.jpg?v=1790473338"},{"product_id":"bartec-usa-rite-sensor-rs-2000-10r-tpms-sensors-pack-of-10-dual-frequency-315-433-mhz-rubber-valve-stems","title":"BARTEC USA RITE‑Sensor RS-2000-10R TPMS Sensors Pack of 10 — Dual‑Frequency 315\/433 MHz, Rubber Valve Stems","description":"\u003cstrong\u003eThe BARTEC RITE-Sensor Sleeve Pack RS-2000-10R is a boxed set of 10 programmable TPMS sensors with rubber valve stems that operate on both 315 MHz and 433 MHz frequencies for broad vehicle coverage.\u003c\/strong\u003e\n\n\u003cp\u003eThe RS-2000-10R (grey box) delivers a simple, single‑SKU solution for tire shops, service centers, and fleet technicians who need reliable, programmable TPMS sensors. Each sensor in this pack ships with a rubber valve stem and supports dual‑frequency operation to match the majority of OE systems. These are engineered to be compatible with BARTEC TPMS programming tools so you can clone, activate, and register sensors quickly during installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these sensors ensure compatibility with most vehicles?\u003c\/h3\u003e\n\u003cp\u003eBARTEC designed the RITE‑Sensor to address wide vehicle coverage by enabling dual‑frequency operation and programmable IDs. That flexibility lets a technician match the sensor’s output to the vehicle’s factory TPMS protocol during programming, reducing the need to stock many different SKUs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates on both 315 MHz and 433 MHz radio bands for global fitment.\u003c\/li\u003e\n  \u003cli\u003eProgrammable IDs compatible with BARTEC TPMS tools and many OE systems.\u003c\/li\u003e\n  \u003cli\u003eSingle SKU simplifies inventory—covers over 98% of vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical and technical features of the RS-2000-10R?\u003c\/h3\u003e\n\u003cp\u003eThe RS-2000-10R pack contains ten sensors equipped with rubber valve stems, designed for standard valve applications. Each sensor transmits tire pressure and temperature data (where applicable) and supports the programming and activation workflows used in professional garages and tire shops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 10 programmable TPMS sensors in a boxed sleeve pack.\u003c\/li\u003e\n  \u003cli\u003eRubber valve stems only—suitable for standard valve service and replacement.\u003c\/li\u003e\n  \u003cli\u003eCompatible with BARTEC’s programming, cloning, and relearn tools for efficient installs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will these sensors affect installation workflow and inventory?\u003c\/h3\u003e\n\u003cp\u003eUsing a single, dual‑frequency sensor reduces the number of different parts you need to stock, cutting inventory complexity. With BARTEC tool compatibility, technicians can program the correct ID and frequency on the spot, shortening service time and minimizing rework from incorrect sensor selection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle‑SKU reduces stock volume and simplifies ordering decisions.\u003c\/li\u003e\n  \u003cli\u003eProgrammable in-shop to match vehicle protocols, avoiding returns.\u003c\/li\u003e\n  \u003cli\u003ePack of 10 supports multiple jobs per order, ideal for busy shops and fleet turnarounds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these sensors compatible with BARTEC tools and industry workflows?\u003c\/h3\u003e\n\u003cp\u003eYes—RS-2000-10R sensors are made to integrate with BARTEC TPMS diagnostic and programming tools, enabling standard activation, cloning, and relearn procedures. That ensures a smooth workflow for technicians familiar with BARTEC equipment and common TPMS service sequences.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFully compatible with BARTEC programmers and diagnostic devices.\u003c\/li\u003e\n  \u003cli\u003eSupports common relearn and cloning methods used by service shops.\u003c\/li\u003e\n  \u003cli\u003ePack format fits professional environments—labelling and batch handling optimized for technicians.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The RS-2000-10R is aimed at tire shops, independent repair centers, mobile tire services, and fleet maintenance teams that require dependable, programmable TPMS sensors in manageable lots. If you prioritize inventory simplicity, fast in‑shop programming with BARTEC tools, and broad vehicle coverage using a rubber‑stem sensor option, this 10‑sensor sleeve pack is a practical, cost‑effective choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these sensors work with both 315 MHz and 433 MHz vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The RS-2000-10R supports dual frequencies (315 MHz and 433 MHz) and can be programmed to match most vehicle TPMS protocols.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use BARTEC tools to program these sensors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These sensors are compatible with BARTEC TPMS diagnostic and programming tools for activation, cloning, and relearn procedures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BARTEC USA","offers":[{"title":"Default Title","offer_id":67585593147577,"sku":"B0D23ZCMQT","price":457.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/bartec-rite-sensor-box-front.jpg?v=1790473353"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/b-qtech-tpms-front-packaging.jpg?v=1794521629","url":"https:\/\/redleafauto.ca\/collections\/tpms-sensors.oembed?page=4","provider":"Redleaf Auto","version":"1.0","type":"link"}