{"title":"VHT","description":"\u003cp\u003eBrowse 33 VHT products at RedLeaf Auto. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"vht-nite-shades-taillight-tint-spray-red-10-oz-transparent-smoked-finish-permanent-plastic-bond","title":"VHT Nite-Shades Taillight Tint Spray, Red 10 oz — Transparent smoked finish, permanent plastic bond","description":"\u003cp\u003e\u003cstrong\u003eVHT Nite-Shades Red is a transparent black coating that darkens taillight lenses off-road but reveals the red light when illuminated.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want a subtle, European-inspired look without replacing lenses, VHT Nite-Shades offers a spray-on solution that tints plastic taillights, fog lights, and turn indicators. The formula creates a smoked appearance when the lights are off and allows the factory red to shine through when on. Note that this product bonds to plastic lenses permanently and is intended for off-road applications only.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT Nite-Shades change the appearance of my vehicle?\u003c\/h3\u003e\n\u003cp\u003eWhen sprayed onto clear or red plastic lenses, the coating produces a darkened, smoked finish that mimics high-end, European styling. The tint is transparent, so the original light color and intensity remain visible during operation. This creates the visual effect of darker lenses without modifying the internal lamp or lens geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduces a consistent smoked look across taillights and indicators\u003c\/li\u003e\n  \u003cli\u003eMaintains light visibility when illuminated\u003c\/li\u003e\n  \u003cli\u003eWorks on factory plastic lenses without cutting or sanding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about application and durability?\u003c\/h3\u003e\n\u003cp\u003eApplication requires a clean, dry surface and even, controlled spraying for a smooth finish. The product bonds strongly to plastic; once cured it resists typical weathering but cannot be easily removed from lenses. Follow safety and ventilation guidelines, and test on a small area first.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpray in light, even coats to avoid runs and achieve uniform coverage\u003c\/li\u003e\n  \u003cli\u003eAllow proper flash and cure time per product instructions\u003c\/li\u003e\n  \u003cli\u003ePermanence: not intended for easy removal from plastic lenses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs VHT Nite-Shades safe and legal for street use?\u003c\/h3\u003e\n\u003cp\u003eVHT Nite-Shades is labeled for off-road use only; local vehicle codes vary on taillight modifications and visibility requirements. Because the coating darkens lenses, confirm street-legal status in your jurisdiction before applying to a vehicle you drive on public roads. For strictly off-road or show vehicles, it provides an attractive cosmetic upgrade.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck local regulations regarding taillight tinting before use on public roads\u003c\/li\u003e\n  \u003cli\u003eOff-road and show vehicles typically accept the smoked aesthetic\u003c\/li\u003e\n  \u003cli\u003eAlways ensure lights remain sufficiently visible for safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I choose the right amount and where can it be used?\u003c\/h3\u003e\n\u003cp\u003eA 10 oz aerosol is sized for multiple applications on a single vehicle’s lens set, depending on coat thickness. It’s formulated for plastic taillights, fog lights, and turn indicators; avoid use on glass or on lenses you may later want to restore to factory clarity. Plan for testing, masking adjacent paintwork, and adequate ventilation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10 oz can covers several thin coats on most passenger vehicle lenses\u003c\/li\u003e\n  \u003cli\u003eBest suited to plastic lenses—test compatibility first\u003c\/li\u003e\n  \u003cli\u003eMask surrounding paint and trim to prevent overspray\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Nite-Shades Red is aimed at automotive enthusiasts, customizers, and detailers seeking a permanent smoked-lens appearance without replacing factory lenses. Ideal for off-road rigs, show cars, and anyone comfortable with a permanent tint on plastic lenses and who will confirm local compliance for street use. If you want a reversible solution for daily-driven vehicles, consider temporary options instead.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can VHT Nite-Shades be removed from plastic lenses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Once cured on plastic lenses it bonds permanently and cannot be satisfactorily removed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this product legal for street-driven vehicles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s labeled for off-road use; check local vehicle codes before applying to street-driven cars.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67588551377081,"sku":"B005257R0O","price":71.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-nite-shades-red-front-can.jpg?v=1790519873"},{"product_id":"vht-flameproof-high-temp-spray-coating-flat-black-11-oz-ceramic-silicone-2000-f-resistance","title":"VHT Flameproof high‑temp spray coating Flat Black, 11 oz — ceramic‑silicone, 2000°F resistance","description":"\u003cstrong\u003eVHT Flameproof Coating in Flat Black is a high-temperature aerosol finish designed to protect and refresh metal surfaces exposed to intermittent heat up to 2000°F.\u003c\/strong\u003e\n\n\u003cp\u003eEngineered for components that see extreme heat—like headers, turbo housings and exhaust valves—this 11 oz aerosol delivers a silicone-ceramic formula that creates a durable, flat-black barrier. It combines rapid surface drying with a required curing step to reach its full thermal resistance. The EZ Touch spray nozzle improves control during application and helps achieve even coverage on complex shapes.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coating protect hot engine parts?\u003c\/h3\u003e\n\u003cp\u003eThe VHT Flameproof coating forms a ceramic-rich layer that resists heat and slows surface degradation. It helps renew worn finishes and can extend the lifespan of exhaust components when applied and cured properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCeramic-silicone resin withstands intermittent temperatures up to 2000°F.\u003c\/li\u003e\n  \u003cli\u003eCreates a flat-black finish that resists blistering and flaking at high heat.\u003c\/li\u003e\n  \u003cli\u003eHelps shield metal from thermal oxidation and surface wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and applications are best suited for this spray?\u003c\/h3\u003e\n\u003cp\u003ePrimarily formulated for exhaust-related parts, the spray performs well on headers, manifolds, turbo housings and exhaust valves. It’s meant for metal substrates and components that reach very high temperatures during normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for headers, manifolds, mufflers and turbo housings.\u003c\/li\u003e\n  \u003cli\u003eWorks on steel and other common exhaust metals when prepped correctly.\u003c\/li\u003e\n  \u003cli\u003eNot intended for continuous-contact furnace or kiln interiors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you apply and cure VHT Flameproof Coating correctly?\u003c\/h3\u003e\n\u003cp\u003eSurface preparation, thin coats and proper curing are essential to achieve maximum heat resistance. The product is touch dry quickly, but requires a specified cure cycle to develop full performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean and de-grease surfaces; remove rust and old loose coating.\u003c\/li\u003e\n  \u003cli\u003eApply several thin, even coats using the EZ Touch nozzle; dry to touch in ~30 minutes.\u003c\/li\u003e\n  \u003cli\u003eHandle in about 1 hour; follow VHT curing instructions (heat cure) for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the finish stay flat black and durable over time?\u003c\/h3\u003e\n\u003cp\u003eWhen applied and cured according to directions, the coating provides a stable flat-black surface that holds up under intermittent high heat. Longevity depends on substrate prep, coat thickness and adherence to the curing schedule.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProperly cured coating resists chipping and color change from heat cycling.\u003c\/li\u003e\n  \u003cli\u003ePeriodic inspection recommended for heavily used exhaust systems.\u003c\/li\u003e\n  \u003cli\u003eRecoat sections after mechanical damage or long-term wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Flameproof Coating suits mechanics, restorers, racers and DIY enthusiasts who need a dependable high-temperature finish for exhaust components and other hot engine parts. If you work with metal parts that see intermittent extreme heat and want a flat-black, ceramic-reinforced protective coat with easy spray control, this 11 oz aerosol is built for those uses—provided you follow proper surface prep and curing steps.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can VHT Flameproof handle continuous 2000°F exposure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It tolerates intermittent temperatures up to 2000°F; continuous exposure will reduce performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long until the coating reaches maximum heat resistance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s touch dry in ~30 minutes and handleable in 1 hour; a specified heat cure is required to reach full resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67591254147257,"sku":"B000CPJLGM","price":64.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-flameproof-front-packaging.jpg?v=1790545238"},{"product_id":"vht-high-temperature-caliper-paint-gloss-black-11-oz-900-f-heat-resistant-fast-drying-finish","title":"VHT High Temperature Caliper Paint Gloss Black 11 oz — 900°F Heat-Resistant, Fast-Drying Finish","description":"\u003cp\u003e\u003cstrong\u003eVHT High Temperature Caliper Paint in Gloss Black is a heat-resistant aerosol coating formulated to protect and shine brake calipers up to 900°F while resisting chipping, chemicals, and brake dust.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for automotive enthusiasts and professional technicians, this 11 oz. aerosol delivers a fast-drying, long-lasting finish specifically for brake calipers, rotors and drums. The formula uses ceramic-enhanced resins to tolerate the intense heat around braking components, giving calipers a showroom gloss while helping them withstand the harsh conditions of road use.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is this paint under high heat and daily driving?\u003c\/h3\u003e\n\u003cp\u003eThe VHT caliper paint contains ceramic resins engineered to remain stable at temperatures up to 900°F, so it keeps its finish even near hot braking surfaces. It’s created to resist cracking and peeling from repeated heating cycles and exposure to road contaminants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCeramic resin system tolerates extreme caliper temperatures.\u003c\/li\u003e\n  \u003cli\u003eFormulated to resist chipping and mechanical abrasion.\u003c\/li\u003e\n  \u003cli\u003eWorks on rotors and drums as well as calipers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly can I finish a caliper project using this aerosol?\u003c\/h3\u003e\n\u003cp\u003eApplication is straightforward: the paint is dry to the touch in about 30 minutes and can be handled after roughly one hour, allowing relatively quick reassembly. Full cure will strengthen over time but initial handling is fast enough for same-day projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDry to touch in ~30 minutes under normal conditions.\u003c\/li\u003e\n  \u003cli\u003eSafe to handle after approximately 1 hour.\u003c\/li\u003e\n  \u003cli\u003eTypical single-can coverage suited to one set of calipers depending on technique.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does this gloss black caliper paint offer against contaminants?\u003c\/h3\u003e\n\u003cp\u003eThe protective finish is formulated to fend off brake dust, common chemicals, and routine road wear, helping the caliper maintain appearance between cleanings. Its glossy surface also makes future cleaning easier, reducing buildup that can affect brake aesthetics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResistant to brake dust buildup for cleaner-looking calipers.\u003c\/li\u003e\n  \u003cli\u003eFormulated to withstand automotive chemicals and light solvents.\u003c\/li\u003e\n  \u003cli\u003eGloss finish simplifies surface maintenance and washing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces can I use this VHT caliper paint on?\u003c\/h3\u003e\n\u003cp\u003eThis aerosol is intended for use on brake calipers, rotors and drums and bonds well to metal surfaces when properly prepped. For best results, remove grease and rust, sand lightly if needed, and follow recommended application steps to ensure adhesion and even coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned primarily for iron, steel and alloy brake components.\u003c\/li\u003e\n  \u003cli\u003eRequires clean, dry, and degreased surfaces before spraying.\u003c\/li\u003e\n  \u003cli\u003eLight sanding improves adhesion on corroded or flaking areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT High Temperature Caliper Paint in Gloss Black is aimed at car owners, restorers, and shop technicians who want a resilient, high-temperature finish for brake components. If you want a professional-looking gloss, heat tolerance up to 900°F, and a durable coating that simplifies cleaning and resists brake dust, this single 11 oz. aerosol is a practical choice for do-it-yourself upgrades or routine maintenance in a shop setting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this paint safe for calipers that get very hot?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ceramic-enhanced formula withstands temperatures up to 900°F, suitable for brake calipers and nearby components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can reassemble wheels after painting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Paint is dry to the touch in about 30 minutes and typically ready for handling and reassembly after roughly one hour.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67591470088377,"sku":"B000CPAVIE","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-caliper-paint-front-packaging_jpg.jpg?v=1790552378"},{"product_id":"vht-engine-metallic-spray-paint-flat-burnt-copper-11-oz-high-heat-chemical-resistant","title":"VHT Engine Metallic Spray Paint — Flat Burnt Copper 11 oz, High‑Heat \u0026 Chemical‑Resistant","description":"\u003cb\u003eVHT Engine Metallic Flat Burnt Copper is a high‑temperature, chemical‑resistant aerosol paint formulated to give engine parts a long‑lasting metallic finish that withstands intermittent heat up to 650°F.\u003c\/b\u003e\n\n\u003cp\u003eThis professional‑grade engine spray blends urethane and ceramic resins to deliver a durable, sparkly flat burnt copper coating designed for use on engine blocks, headers, valve covers, transmissions and other drivetrain components. The formula resists corrosion, rust, salt spray and common automotive chemicals and degreasers, and it develops its full performance after proper curing by engine heat or an oven bake at moderate temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly does this paint dry and when is it ready for use?\u003c\/h3\u003e\n\u003cp\u003eThe aerosol dries to the touch in about 30 minutes and reaches handling strength overnight under typical ambient conditions. However, the coating achieves its maximum durability and chemical resistance only after proper curing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTouch dry: ~30 minutes\u003c\/li\u003e\n  \u003cli\u003eHandling\/overnight set: typically by next day\u003c\/li\u003e\n  \u003cli\u003eFull cure: occurs with normal engine operating temperatures or heat to 200°F\u003c\/li\u003e\n  \u003cli\u003eFollow can instructions for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this paint withstand engine heat and automotive fluids?\u003c\/h3\u003e\n\u003cp\u003eYes — the Engine Metallic formula is engineered for intermittent temperatures up to 650°F (343°C) and resists gasoline additives, oils and many shop chemicals. It’s intended for parts exposed to high heat and a harsh chemical environment rather than flexible or moving seals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntermittent temperature rating: up to 650°F\u003c\/li\u003e\n  \u003cli\u003eChemical resistance: formulated against fuels, oils and degreasers\u003c\/li\u003e\n  \u003cli\u003eBest for rigid metal parts: blocks, headers, covers, brackets\u003c\/li\u003e\n  \u003cli\u003eNot a replacement for specialized high‑temperature ceramic coatings on turbo housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat preparation and application steps give the best finish?\u003c\/h3\u003e\n\u003cp\u003eSurface prep is critical: remove loose rust, oil and old paint, then use a suitable engine primer before applying the metallic topcoat. Apply light, even passes from the recommended distance and allow flash time between coats to avoid runs and ensure uniform metallic texture.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDegrease and clean thoroughly\u003c\/li\u003e\n  \u003cli\u003eSand or wire‑brush to a sound surface\u003c\/li\u003e\n  \u003cli\u003eUse compatible engine primer, then 2–3 light topcoats\u003c\/li\u003e\n  \u003cli\u003eCure by running the engine or baking parts to reach full performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: mechanics, restorers and DIY enthusiasts who want a durable metallic finish on rigid engine and drivetrain parts will appreciate VHT Engine Metallic in Flat Burnt Copper. It suits projects that need a heat‑tolerant, chemical‑resistant coating with a decorative metallic appearance — ideal for engine bays, custom builds and component refurbishment when combined with proper surface prep, priming and curing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrive train paint for engine components and accessories\u003c\/li\u003e\n  \u003cli\u003eChemical resistant urethane\/ceramic blend\u003c\/li\u003e\n  \u003cli\u003eWithstands intermittent temperatures up to 650°F (343°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlways read and follow the instructions printed on the can for safe handling, application distances, ventilation and curing procedures. For best results use as part of the VHT engine coating system: engine primer, engine color and engine clear.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use VHT Engine Metallic on exhaust headers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for intermittent heat up to 650°F; avoid constant extreme temperatures and follow curing instructions for best durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a primer before applying this paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A compatible engine primer is recommended for adhesion and corrosion protection before applying the metallic topcoat.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67591706706105,"sku":"B002NUFVRW","price":62.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-engine-metallic-flat-burnt-copper-front-can.jpg?v=1790557970"},{"product_id":"vht-flameproof-coating-spray-flat-aluminum-11-oz-heat-resistant-to-2000-f-low-sheen-finish","title":"VHT Flameproof Coating spray Flat Aluminum 11 oz — heat-resistant to 2000°F, low-sheen finish","description":"\u003cstrong\u003eVHT Flameproof Coating (Flat Aluminum, 11 oz) is a silicone-ceramic aerosol that restores and protects metal parts exposed to intermittent temperatures up to 2000°F.\u003c\/strong\u003e\n\n\u003cp\u003eIf you work on engines, turbochargers, headers, or any component that faces extreme heat, this aerosol is formulated to extend service life and renew surfaces with a heat-resistant barrier. The flat aluminum finish reduces glare and blends with stock metal tones while the special resin system is engineered to resist blistering and flaking when properly applied and cured.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coating stand up to extreme heat?\u003c\/h3\u003e\n\u003cp\u003eThe formula uses ceramic-reinforced resins and silicone binders designed to tolerate short bursts of very high temperatures. It’s intended for intermittent exposures rather than continuous molten contact. For best results, follow the listed cure schedule to develop full heat resistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for intermittent temperatures up to 2000°F (ceramic resin system)\u003c\/li\u003e\n  \u003cli\u003eSilicone-ceramic composition minimizes peeling and flaking under thermal stress\u003c\/li\u003e\n  \u003cli\u003eCuring process converts the coating to its highest heat tolerance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and parts are ideal for this spray?\u003c\/h3\u003e\n\u003cp\u003eThis coating is tailored for ferrous and some non-ferrous metal components subjected to exhaust heat. Common uses include headers, manifolds, turbo housings and exhaust valves, where repeated temperature cycling can accelerate wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeaders and exhaust manifolds—reduces oxidation and surface degradation\u003c\/li\u003e\n  \u003cli\u003eTurbo housings—helps resist heat-related surface failure\u003c\/li\u003e\n  \u003cli\u003eExhaust valves and related hardware—restores appearance and protective layer\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the application and cure process?\u003c\/h3\u003e\n\u003cp\u003eSpray in thin, even coats and allow tack-free drying before handling; ultimate performance requires the full cure schedule. The product dries to the touch quickly, enabling additional coats and faster workflow on the bench or in the shop.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDries to touch in about 30 minutes, handleable in roughly 1 hour\u003c\/li\u003e\n  \u003cli\u003eApply several thin coats rather than one heavy coat for uniform coverage\u003c\/li\u003e\n  \u003cli\u003eFollow the manufacturer’s heat-curing steps to achieve maximum heat resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the finish and spray design affect ease of use?\u003c\/h3\u003e\n\u003cp\u003eThe flat aluminum color provides a low-sheen, factory-style look while the EZ Touch spray nozzle offers controlled, even application to reduce runs and overspray. The aerosol format makes it convenient for spot repairs and full-component refinishing alike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlat aluminum finish blends with stock metal tones\u003c\/li\u003e\n  \u003cli\u003eEZ Touch nozzle improves control and comfort during spraying\u003c\/li\u003e\n  \u003cli\u003eAerosol can is portable—good for garage or trackside touch-ups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: mechanics, fabricators, restorers, and performance builders who need a durable, heat-resistant coating for exhaust systems and high-temperature engine parts. It’s suited for professionals and experienced DIYers who will follow surface prep and curing instructions to achieve the best, longest-lasting results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on continuous high-heat parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it’s designed for intermittent heat up to 2000°F; continuous molten contact may exceed its intended performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before the coating reaches full heat resistance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Allow initial drying, then complete the manufacturer-recommended heat cure; full heat tolerance develops after proper curing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67591861371065,"sku":"B000CPJLH6","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-flat-aluminum-front.jpg?v=1790559469"},{"product_id":"vht-flameproof-exhaust-coating-flat-silver-11-oz-2000-f-heat-resistant-ceramic-silicone","title":"VHT Flameproof Exhaust Coating, Flat Silver 11 oz — 2000°F Heat-Resistant Ceramic-Silicone","description":"\u003cp\u003e\u003cstrong\u003eVHT Flameproof Coating Flat Silver is a high-temperature silicone-ceramic spray that protects and revives exhaust components by resisting intermittent heat up to 2000°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aerosol coating is formulated to restore the appearance of headers, manifolds, turbo housings and other hot-metal surfaces while adding a durable, heat-resistant barrier. The flat silver finish blends with factory parts and gives a low-gloss, professional look that resists fading under extreme heat. Designed for automotive and industrial applications, the formula dries quickly and requires a proper cure for long-term performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coating protect parts exposed to extreme heat?\u003c\/h3\u003e\n\u003cp\u003eThe coating uses silicone-ceramic resins that form a tough film able to withstand intermittent temperatures up to 2000°F. It creates a thermal barrier that minimizes oxidation and surface breakdown caused by repeated heating cycles. Proper curing completes the chemical change that provides best resistance and longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCeramic-reinforced silicone resin resists thermal breakdown\u003c\/li\u003e\n  \u003cli\u003eWithstands intermittent heat up to 2000°F for many exhaust applications\u003c\/li\u003e\n  \u003cli\u003eReduces surface oxidation and maintains appearance under heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and parts can I safely spray with VHT Flameproof?\u003c\/h3\u003e\n\u003cp\u003eThis product is formulated for metal surfaces exposed to high temperature, such as exhaust systems, header and manifold surfaces, turbo housings and exhaust valves. It should be applied to clean, bare metal or properly prepped surfaces and is not intended for low-temperature plastics or rubber. Verify material compatibility and follow surface preparation steps before painting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeaders, exhaust manifolds and mufflers\u003c\/li\u003e\n  \u003cli\u003eTurbo housings and downpipes\u003c\/li\u003e\n  \u003cli\u003eExhaust valves and high-heat metal assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply and cure the spray for durable results?\u003c\/h3\u003e\n\u003cp\u003eShake the can thoroughly and use the EZ Touch nozzle for controlled, even coats. Apply multiple light coats rather than one heavy coat, allowing tack-free drying between passes; the coating is touch-dry quickly and handleable within about an hour. A heat cure cycle is required for peak temperature resistance—follow the recommended progressive heating steps to fully set the ceramic-silicone film.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShake can 1–2 minutes after mixing ball moves freely\u003c\/li\u003e\n  \u003cli\u003eApply several thin coats; dry to touch in ~30 minutes\u003c\/li\u003e\n  \u003cli\u003ePerform staged heat cure per product instructions for maximum durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the flat silver finish hold up and how does it look after use?\u003c\/h3\u003e\n\u003cp\u003eThe flat silver is designed to blend with factory metal finishes and resists color change under high heat when properly cured. While heavy abrasion or chemical exposure can reduce appearance over time, the ceramic-silicone chemistry maintains adhesion and color stability across repeated heat cycles. Occasional inspection and touch-up keep components looking professional.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-gloss silver finish hides soot and heat staining\u003c\/li\u003e\n  \u003cli\u003eColor stability when properly cured and used as directed\u003c\/li\u003e\n  \u003cli\u003eTouch-ups possible for maintenance of visual appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Flameproof Coating is aimed at mechanics, performance enthusiasts, custom builders and industrial maintenance teams who need a reliable heat-resistant finish for exhaust system components and other hot metal assemblies. If you work with headers, turbo systems or any parts exposed to extreme temperatures and want a professional flat silver finish with ceramic-strength protection, this 11 oz aerosol offers a fast, convenient option — just be sure to prepare surfaces correctly and complete the proper cure cycle for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can VHT Flameproof withstand continuous engine temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It resists intermittent temperatures up to 2000°F; continuous exposure at peak temps may reduce lifespan. Follow curing instructions for best durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can handle a coated part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The spray is touch-dry in about 30 minutes and usually handleable within an hour; a heat cure is required for full performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67591862354105,"sku":"B000CPIMUS","price":61.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-flat-silver-front-can.jpg?v=1790559489"},{"product_id":"vht-flameproof-coating-high-temp-ceramic-silicone-spray-flat-gray-11-oz-protects-to-2000-f","title":"VHT Flameproof Coating high-temp ceramic-silicone spray — Flat Gray 11 oz, protects to 2000°F","description":"\u003cp\u003e\u003cstrong\u003eVHT Flameproof Coating in flat gray is a high-temperature ceramic-silicone spray that protects and restores exhaust components and other surfaces exposed to extreme heat up to 2000°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aerosol formula is engineered to renew metal parts that run hot—headers, manifolds, turbo housings and exhaust valves—by creating a heat-resistant barrier. The flat gray finish blends with many engine bay and undercarriage components while providing lasting protection when applied and cured according to directions. It’s an 11 oz can designed for shop or DIY use, featuring an easy-spray EZ Touch nozzle and a fast initial dry time for efficient working sessions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT Flameproof protect parts exposed to extreme heat?\u003c\/h3\u003e\n\u003cp\u003eThe coating bonds to metal surfaces using ceramic-enhanced resins and silicone components that resist intermittent temperatures up to 2000°F. Instead of relying on paint pigments alone, this formulation forms a tougher surface layer that reduces oxidation and surface degradation from heat cycling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCeramic-silicone chemistry for high-temperature resistance\u003c\/li\u003e\n  \u003cli\u003eWithstands short bursts of extreme heat without breaking down\u003c\/li\u003e\n  \u003cli\u003eReduces surface rust and deterioration on hot parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts and projects is this spray best suited for?\u003c\/h3\u003e\n\u003cp\u003eIt’s intended for exhaust-related hardware and other components regularly exposed to high thermal loads. Common uses include headers, exhaust manifolds, turbo housings and valves, but it can also be applied to any metal surface that needs improved heat tolerance and a flat gray finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeaders and exhaust systems — protects against heat damage\u003c\/li\u003e\n  \u003cli\u003eTurbo housings and exhaust valves — preserves integrity under thermal stress\u003c\/li\u003e\n  \u003cli\u003eCustom fabrication and restoration where heat resistance is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the practical details for application and curing?\u003c\/h3\u003e\n\u003cp\u003eThe product dries to the touch quickly and can be handled in about an hour, but achieving full heat resistance requires following the manufacturer’s curing procedure. Proper surface prep—clean, degreased metal—and staged curing ensure maximum adhesion and longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDry to touch in ~30 minutes; handle in about 1 hour\u003c\/li\u003e\n  \u003cli\u003eFollow the recommended heat-cure schedule for peak performance\u003c\/li\u003e\n  \u003cli\u003eUse the EZ Touch nozzle for controlled, even coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this change the appearance of my parts?\u003c\/h3\u003e\n\u003cp\u003eThe finish is flat gray, providing a subdued, factory-style look that helps hide soot and discoloration. Multiple thin coats produce an even appearance while preserving surface detail; avoid heavy single passes to prevent runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlat gray for a low-gloss, OEM-style finish\u003c\/li\u003e\n  \u003cli\u003eThin, even coats recommended to avoid drips\u003c\/li\u003e\n  \u003cli\u003eDesigned to blend with engine bay components and underbody hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Flameproof Coating is aimed at mechanics, fabricators, restorers and performance enthusiasts who need a reliable high-temp spray for exhaust components and other metal parts exposed to severe heat. If you want a durable ceramic-silicone barrier in a flat gray finish and are prepared to follow the curing steps, this 11 oz aerosol offers an efficient, workshop-ready solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this coating handle continuous engine heat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It resists intermittent temperatures up to 2000°F; continuous extreme heat may reduce longevity without proper curing and testing for your application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before the coated part can be exposed to heat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The surface is touch-dry in about 30 minutes and can be handled in an hour, but follow VHT’s curing instructions before full thermal exposure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67591862452409,"sku":"B00296BR00","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-flameproof-front-can.jpg?v=1790559493"},{"product_id":"vht-engine-enamel-spray-paint-cast-aluminum-11-oz-high-heat-chemical-resistant-finish","title":"VHT Engine Enamel spray paint — Cast Aluminum 11 oz, high-heat, chemical-resistant finish","description":"\u003cstrong\u003eVHT Engine Enamel (Cast Aluminum) is a high-temperature, chemical-resistant spray paint engineered to protect and finish engine parts with a durable, long-lasting coating.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned for use on engine blocks, valve covers, headers, brackets and other metal components, this 11 oz aerosol combines urethane and ceramic resins to form a rugged finish that tolerates heat, fuels and common garage chemicals. The formula resists corrosion, rust and salt spray while standing up to modern gasoline additives and degreasers. Proper curing by normal engine operation or controlled baking is required to reach the coating's full performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this paint withstand engine heat and regular use?\u003c\/h3\u003e\n\u003cp\u003eThe VHT Engine Enamel includes ceramic-modified urethane resins that create a stable film at elevated temperatures up to the product's rated limit. After the recommended cure, the finish resists fading, peeling and breakdown that can occur from repeated thermal cycling and exposure to oils and fuels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulation resists heat and thermal cycling\u003c\/li\u003e\n  \u003cli\u003eCures with engine operation or oven-bake at ~200°F\u003c\/li\u003e\n  \u003cli\u003eMaintains adhesion on metal under vibration and use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat prep and curing steps give the best, longest-lasting result?\u003c\/h3\u003e\n\u003cp\u003eClean surfaces thoroughly of oil, grease and rust before painting and use a compatible engine primer when needed. Apply light, even coats and allow the enamel to dry to the touch; final properties develop after either normal engine heating or a controlled bake step as directed on the can.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDegrease and remove loose rust or scale\u003c\/li\u003e\n  \u003cli\u003eUse engine primer for bare metal and follow spray distance guidelines\u003c\/li\u003e\n  \u003cli\u003eCure by running the engine or heating parts to approximately 200°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich parts and environments is this spray best suited for?\u003c\/h3\u003e\n\u003cp\u003eThis cast-aluminum color enamel is intended for external engine components and accessories that face heat, road salts and chemical exposure. It performs well on valve covers, starters, water pumps, transmissions, differentials, headers and other exposed metal parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for valve covers, engine blocks and brackets\u003c\/li\u003e\n  \u003cli\u003eResists salt spray and corrosion in harsh environments\u003c\/li\u003e\n  \u003cli\u003eWorks on both workshop-restored and regularly used engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the color match photos and how durable is the finish?\u003c\/h3\u003e\n\u003cp\u003eImage appearance varies by monitor and lighting; colors may differ from online photos, so test a small area if exact matching is critical. The finish is formulated for excellent durability and chemical resistance, but final appearance and longevity depend on correct surface prep and full curing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eColors may appear different across screens—perform a sample spray when color accuracy matters\u003c\/li\u003e\n  \u003cli\u003eExcellent resistance to gasoline, oils and common degreasers\u003c\/li\u003e\n  \u003cli\u003ePart of a multi-step coating system: primer, color and clear for best protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Engine Enamel in cast aluminum is aimed at mechanics, DIY restorers, performance builders and fleet service technicians who need a reliable, heat-resistant coating for exposed engine parts. If you want a professional-looking finish that tolerates real-world engine conditions—provided you prepare and cure correctly—this spray offers a robust solution for workshop and road use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need primer before using VHT Engine Enamel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For best adhesion on bare metal use VHT engine primer; on pre-painted or clean metal it may be applied directly per can instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I cure the paint to reach full heat resistance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Allow air-dry, then run the engine under normal conditions or heat parts to about 200°F to complete the cure and develop full properties.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592311275705,"sku":"B000CPAVMU","price":54.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-engine-enamel-front-can-cast-aluminum.jpg?v=1790563010"},{"product_id":"vht-engine-enamel-spray-paint-gloss-hot-pink-11-oz-high-heat-chemical-resistant-finish","title":"VHT Engine Enamel spray paint — Gloss Hot Pink 11 oz, high-heat \u0026 chemical-resistant finish","description":"\u003cstrong\u003eVHT Engine Enamel in Gloss Hot Pink is a high-temperature, urethane-ceramic spray coating formulated to protect and finish engines and metal components while delivering a durable, glossy pink finish.\u003c\/strong\u003e\n\n\u003cp\u003eThis 11 oz aerosol is part of VHT's engine coating system and blends urethane with ceramic resins to resist heat, chemicals, and environmental exposure. It’s designed for use on engine blocks, valve covers, headers, brackets, transmissions, and other metal parts where long-lasting color and protection under elevated temperatures are required. The formula tolerates everyday automotive fluids and common degreasers, and it reaches its final properties after proper curing—either in-service at normal engine temperature or with a controlled bake.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is this hot pink engine enamel under heat and chemicals?\u003c\/h3\u003e\n\u003cp\u003eThe VHT enamel combines ceramic and urethane chemistries to deliver both heat and chemical resistance suitable for many engine applications. It withstands elevated temperatures and resists breakdown from gasoline additives, oils, and common cleaning solvents when properly cured.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for high-heat engine environments when cured correctly\u003c\/li\u003e\n  \u003cli\u003eResists corrosion, rust, and salt spray on exposed metal parts\u003c\/li\u003e\n  \u003cli\u003eFormulated to resist staining and softening from fuels and degreasers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts can you safely coat with this spray paint?\u003c\/h3\u003e\n\u003cp\u003eUse this enamel on a wide range of automotive and metal components that require a durable finish. It’s suitable for both visible dress-up pieces and functional parts exposed to heat and fluids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eValve covers, engine blocks, and intake manifolds for cosmetic and protective finishes\u003c\/li\u003e\n  \u003cli\u003eHeaders, exhaust brackets, and transmission housings where heat tolerance matters\u003c\/li\u003e\n  \u003cli\u003eStarters, water pumps, and differential covers that face chemical exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply and cure VHT Engine Enamel for best results?\u003c\/h3\u003e\n\u003cp\u003eProper surface prep and following the can instructions are essential to reach the coating’s intended performance. Clean, degrease, and prime metal surfaces as recommended, apply thin even coats, and allow drying time between passes before final curing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean surfaces of oil, grease, and loose rust; use a suitable primer when needed\u003c\/li\u003e\n  \u003cli\u003eSpray multiple light coats rather than one heavy coat to avoid runs and ensure adhesion\u003c\/li\u003e\n  \u003cli\u003eCure by running the engine to normal operating temperature or heat parts to about 200°F for full properties\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the hot pink color look the same on every device or monitor?\u003c\/h3\u003e\n\u003cp\u003eFinish appearance can vary by lighting, surface texture, and display device; metallic or porous substrates will reflect light differently. For color-critical projects, test-spray a scrap piece or a hidden area first to confirm shade and gloss level.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eColor depth and gloss depend on substrate finish and number of coats applied\u003c\/li\u003e\n  \u003cli\u003eDifferent screens and photos may not perfectly match the real-life hot pink tone\u003c\/li\u003e\n  \u003cli\u003eTry a test panel to validate color and coverage before full application\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Engine Enamel Gloss Hot Pink is ideal for car enthusiasts, custom builders, and professional mechanics wanting a bright, durable finish on engine and drivetrain components. Choose it if you need a high-heat, chemically resistant color coat for both visual impact and protection on metal parts, and be prepared to follow the product’s prep and curing recommendations to achieve optimal performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need primer before using VHT Engine Enamel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Priming is recommended on bare metal or heavily corroded parts to improve adhesion and corrosion protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before the paint reaches full heat resistance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Full performance develops after proper curing—either normal engine operation or baking parts to about 200°F.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592311537849,"sku":"B000CPAVJ8","price":55.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-hot-pink-front-can.jpg?v=1790563010"},{"product_id":"vht-wrinkle-plus-coating-spray-flat-black-11-oz-high-heat-textured-finish-corrosion-resistant","title":"VHT Wrinkle Plus Coating spray — Flat Black 11 oz, high-heat textured finish, corrosion-resistant","description":"\u003cp\u003e\u003cstrong\u003eVHT Wrinkle Plus Coating in flat black is a high-temperature, textured finish that adds a durable, wrinkle-patterned surface to metal parts while resisting heat, corrosion, and wear.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for automotive, industrial, and custom projects, VHT Wrinkle Plus blends rich color with a textured surface to give metal components a handcrafted, low-gloss appearance. This aerosol formula sprays on to create a distinctive wrinkled texture that hides minor surface imperfections and provides a tough protective layer. It’s popular for valve covers, dashboards, shifters, and other exposed metal where both style and durability matter.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT Wrinkle Plus perform under heat?\u003c\/h3\u003e\n\u003cp\u003eVHT Wrinkle Plus is engineered to withstand elevated temperatures without losing its texture or color. After curing, it tolerates continuous exposure up to 350°F (177°C), making it suitable for many engine-bay components and heat-exposed hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature resistance: continuous up to 350°F (177°C)\u003c\/li\u003e\n  \u003cli\u003eMaintains wrinkle texture after heat exposure\u003c\/li\u003e\n  \u003cli\u003eSuitable for engine and nearby components like valve covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and parts can I use it on?\u003c\/h3\u003e\n\u003cp\u003eThis coating bonds to a wide range of metal substrates commonly found in cars, trucks, and machinery. It’s formulated for parts that need a combination of visual appeal and protection, particularly where chipping or corrosion would be a concern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended for valve covers, alternators, starters, and shifters\u003c\/li\u003e\n  \u003cli\u003eWorks on metal dashboards, glove boxes, door panels, and firewalls\u003c\/li\u003e\n  \u003cli\u003ePrepares well over properly cleaned and primed metal surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is the finish?\u003c\/h3\u003e\n\u003cp\u003eThe Wrinkle Plus finish is formulated to resist common solvents, grease, and fading from weather exposure. It provides a rugged barrier that reduces the risk of rust, chipping, and cracking on exposed components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResists color fade, grease, and degreasing agents\u003c\/li\u003e\n  \u003cli\u003eOffers strong protection against rust and corrosion\u003c\/li\u003e\n  \u003cli\u003eFlat black finish minimizes glare and hides surface flaws\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about application and appearance?\u003c\/h3\u003e\n\u003cp\u003eApplication is done with an aerosol can for control and even coverage; the product sets into a wrinkle pattern as it dries. Proper surface prep and technique influence the consistency of the texture and the final appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAerosol 11 oz can for precise, small-area use\u003c\/li\u003e\n  \u003cli\u003eFlat finish yields a subdued, low-sheen look ideal for engine bays\u003c\/li\u003e\n  \u003cli\u003eSurface prep: clean, degrease, and prime where recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? VHT Wrinkle Plus Flat Black is aimed at car enthusiasts, restoration hobbyists, and professionals who want a heat-tolerant textured finish on metal parts. Choose it if you need a durable, low-gloss black coating that conceals imperfections and stands up to heat, grease, and the elements while giving components a custom, factory-like wrinkle appearance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is VHT Wrinkle Plus safe for engine parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—after curing, it resists temperatures up to 350°F (177°C), suitable for many engine-adjacent metal parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a primer before using this coating?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Priming is recommended on bare metal for best adhesion and corrosion protection, after cleaning and degreasing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592492122297,"sku":"B000CPIMXK","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-wrinkle-plus-front-can.jpg?v=1790564611"},{"product_id":"vht-roll-bar-chassis-paint-satin-black-11-oz-aerosol-self-priming-ceramic-enhanced-heat-resistance","title":"VHT Roll Bar \u0026 Chassis Paint Satin Black 11 oz Aerosol — Self-Priming, Ceramic-Enhanced Heat Resistance","description":"\u003cp\u003e\u003cstrong\u003eVHT SP671 Roll Bar and Chassis Paint is a satin black, 11 oz aerosol formulated for durable, self-priming protection on roll bars, frames and suspension components.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for automotive underbody, cage and chassis applications, this satin black spray gives metal parts a long-lasting finish that resists weather, rust and mild heat exposure. The formula contains ceramic-enhanced resins to add toughness up to 250° F and creates a uniform, satin surface without a separate primer step. It’s packaged in a convenient 11 oz aerosol for brush-free, even coverage on hard-to-reach areas.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this paint protect roll bars and chassis from the elements?\u003c\/h3\u003e\n\u003cp\u003eVHT SP671 combines corrosion-resistant ingredients and a self-priming formula so the coated metal better withstands moisture, road salts and everyday exposure. Its satin film sheds water and slows rust formation compared with bare metal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAll-weather rust and corrosion resistance built into the formulation\u003c\/li\u003e\n  \u003cli\u003eSelf-priming adhesion reduces flaking and peeling\u003c\/li\u003e\n  \u003cli\u003eSatin finish hides minor surface imperfections while repelling moisture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this spray paint on hot or heat-exposed components?\u003c\/h3\u003e\n\u003cp\u003eThe ceramic-enriched resins tolerate temperatures up to 250° F, making the product suitable for areas that see occasional heat, like chassis near hot exhaust sections or brake hardware. It is not intended for constant contact with very high-temperature surfaces such as exhaust headers that exceed the stated limit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCeramic resins provide heat resistance to 250° F\u003c\/li\u003e\n  \u003cli\u003eGood for occasional heat exposure on nearby chassis parts\u003c\/li\u003e\n  \u003cli\u003eNot recommended for continual high-temperature engine parts above rated limit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply VHT SP671 for a professional-looking satin black finish?\u003c\/h3\u003e\n\u003cp\u003eShake the can thoroughly and spray from a consistent distance using light, overlapping passes to avoid runs. The paint is self-priming, so you can often apply directly to clean metal, but removing heavy rust, grease and loose scale will improve adhesion and longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface prep: clean, degrease, and remove loose rust or flaking paint\u003c\/li\u003e\n  \u003cli\u003eTechnique: shake can, spray light coats 6–8\" away, allow flash between coats\u003c\/li\u003e\n  \u003cli\u003eCoverage: 11 oz aerosol is ideal for spot work, roll bars, and small chassis sections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat finish and durability can I expect from the satin black coating?\u003c\/h3\u003e\n\u003cp\u003eThe result is a durable satin finish that balances low gloss with a uniform appearance to conceal imperfections and provide corrosion protection. Expect a tough film that resists chipping and maintains its look under normal road and weather conditions when applied correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSatin black sheen for a clean, professional look\u003c\/li\u003e\n  \u003cli\u003eDurable, chip-resistant film when applied as directed\u003c\/li\u003e\n  \u003cli\u003eLong-term protection versus bare metal in typical driving environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT SP671 is aimed at mechanics, fabricators, off-road builders and DIY enthusiasts who need a specialized aerosol for roll bars, cages, frames and chassis components. If you want a quick, reliable satin-black protective coating with rust resistance and modest heat tolerance in an easy-to-spray 11 oz can, this product suits spot repairs and small-scale projects on vehicles and metal equipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is VHT SP671 self-priming or do I need a primer first?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: VHT SP671 is self-priming for many applications, but for best adhesion remove heavy rust and degrease surfaces first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What heat range can this paint withstand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The ceramic-enhanced formula resists heat up to 250° F; avoid use on parts that exceed that temperature continuously.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592563491001,"sku":"B000CPAVI4","price":59.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-sp671-front-aerosol-can.jpg?v=1790565579"},{"product_id":"vht-caliper-paint-gloss-red-11-oz-high-heat-ceramic-enriched-brake-caliper-coating-900-f-durable","title":"VHT Caliper Paint Gloss Red 11 oz — High-Heat Ceramic-Enriched Brake Caliper Coating (900°F, Durable)","description":"\u003cp\u003e\u003cstrong\u003eVHT Caliper Paint Gloss Red 11 oz is a high-heat, durable aerosol coating made for painting brake calipers and other brake components while resisting chipping, chemicals, and heat up to 900°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want a professional-looking, long-lasting finish on your brake hardware, this caliper paint delivers a vibrant gloss red that stands up to the temperatures and contaminants that brake parts face. Formulated with ceramic-enriched resins, it adheres to metal, dries quickly, and is engineered to resist brake dust, road grime, and occasional chemical exposure. Preparation of the surface before spraying is critical to achieve the best adhesion and longevity.\u003c\/p\u003e\n\n\u003ch3\u003eHow hot can VHT Caliper Paint withstand and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eThis paint tolerates intermittent temperatures up to 900°F (482°C), which covers the thermal spikes brake components can see during spirited driving or repeated heavy braking. Heat resistance helps prevent blistering, fading and breakdown of the finish over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCeramic-enriched resin formulation resists heat up to 900°F\u003c\/li\u003e\n  \u003cli\u003eMaintains gloss and color under intermittent high temperatures\u003c\/li\u003e\n  \u003cli\u003eReduces risk of paint failure from thermal cycling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it hold up against chips, chemicals, and brake dust?\u003c\/h3\u003e\n\u003cp\u003eVHT’s formula is intended to be abrasion- and chemical-resistant so the coated surface stays cleaner and looks newer longer. It’s designed to bond tightly to prepped metal to resist chipping and to tolerate exposure to brake dust and common road contaminants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngineered to resist chipping from road debris and use\u003c\/li\u003e\n  \u003cli\u003eFormulation minimizes staining from brake dust and light chemical exposure\u003c\/li\u003e\n  \u003cli\u003eDurable finish helps reduce frequent touch-ups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the application and drying process?\u003c\/h3\u003e\n\u003cp\u003eThe aerosol is user-friendly: the EZ Touch conical nozzle provides a controlled spray pattern for even coverage. It becomes dry to the touch in about 30 minutes and can be handled in roughly one hour, but full cure and optimum resistance develop after proper flash times and baking if desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEZ Touch conical nozzle for smoother, more precise spraying\u003c\/li\u003e\n  \u003cli\u003eDry to touch in ~30 minutes and handleable in ~1 hour under recommended conditions\u003c\/li\u003e\n  \u003cli\u003eBest results with thorough surface prep: clean, degrease, and scuff or sand surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this paint be used on other brake parts besides calipers?\u003c\/h3\u003e\n\u003cp\u003eYes — while formulated for calipers, it’s suitable for other brake components such as rotors and drums where heat and durability are required. Ensure each part is compatible and prepped correctly to promote adhesion and longevity of the coating.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended for calipers, rotors, and drums\u003c\/li\u003e\n  \u003cli\u003eTest small areas first on unusual alloys or coated parts\u003c\/li\u003e\n  \u003cli\u003eFollow safety guidelines and avoid coated friction surfaces (pads, rotors friction faces)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Caliper Paint Gloss Red 11 oz is aimed at car enthusiasts, detailers, and DIY mechanics who want a showroom-style finish on brake hardware that stands up to real-world conditions. It’s suitable for anyone who will carefully prep the surface, follow application instructions, and wants a high-gloss red finish that resists heat, chipping, and brake dust.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is VHT Caliper Paint safe for high-temperature brake components?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it resists intermittent temperatures up to 900°F (482°C), suitable for brake calipers and similar components when applied correctly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can handle parts after painting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The finish is dry to the touch in about 30 minutes and handleable in roughly one hour under recommended conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592721825977,"sku":"B000CPJLVC","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-caliper-paint-gloss-red-front-can.jpg?v=1790567121"},{"product_id":"vht-caliper-paint-clear-gloss-11-oz-ceramic-enhanced-high-heat-clearcoat-quick-dry","title":"VHT Caliper Paint Clear Gloss 11 oz — Ceramic-Enhanced High-Heat Clearcoat, Quick-Dry","description":"\u003cb\u003eVHT Caliper Paint Gloss Clear is a high-heat, durable spray coating made for brake calipers that delivers a glossy protective finish and resists chipping, fading, and brake dust.\u003c\/b\u003e\n\n\u003cp\u003eDesigned specifically for the look and function of brake hardware, this 11 oz aerosol lays down a ceramic-enhanced clear gloss that tolerates intermittent temperatures up to 900°F (482°C). The formulation bonds to metal surfaces used on calipers, rotors, and drums, dries quickly, and helps preserve a freshly painted appearance under road and weather stress. Proper surface preparation and application technique are important to achieve the best adhesion and longevity.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this caliper clear coat stand up to high heat?\u003c\/h3\u003e\n\u003cp\u003eThe clear contains ceramic resins engineered to resist intermittent temperatures up to 900°F (482°C), so it keeps a stable glossy layer in the demanding thermal environment of braking systems. While not intended to act as a thermal barrier, the formulation maintains film integrity and color under repeated heat cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCeramic-enhanced resins for elevated heat tolerance\u003c\/li\u003e\n  \u003cli\u003eFormulated for intermittent exposure up to 900°F (482°C)\u003c\/li\u003e\n  \u003cli\u003eMaintains gloss and film strength after repeated heating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of durability and protection can I expect?\u003c\/h3\u003e\n\u003cp\u003eVHT Caliper Paint Gloss Clear is made to resist chipping, brake dust, and common chemicals encountered on the road. It forms a tough, fast-drying finish that stays intact through typical driving conditions, helping painted calipers look newer longer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResistant to chipping from debris and road impacts\u003c\/li\u003e\n  \u003cli\u003eRepels brake dust and reduces visible grime buildup\u003c\/li\u003e\n  \u003cli\u003eQuick-dry formula lowers handling and reassembly time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly does it dry and when can parts be handled?\u003c\/h3\u003e\n\u003cp\u003eThe product is engineered for rapid curing: it becomes dry to the touch in about 30 minutes and can be handled after roughly one hour in normal shop conditions. Full cure times vary with temperature, humidity, and coat thickness, so allow additional time for heavier builds or cooler environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTouch-dry in about 30 minutes under recommended conditions\u003c\/li\u003e\n  \u003cli\u003eSafe to handle around 1 hour after application\u003c\/li\u003e\n  \u003cli\u003eAllow longer cure time for thicker coats or low temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare and apply this spray to get professional results?\u003c\/h3\u003e\n\u003cp\u003eGood surface prep is essential: clean, degrease, and remove loose paint or rust before spraying. Apply several light, even coats rather than one heavy pass and use the EZ Touch conical nozzle for precise coverage on calipers, rotors, and drums.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThoroughly clean and decontaminate metal surfaces first\u003c\/li\u003e\n  \u003cli\u003eSand or media-blast to sound metal where necessary\u003c\/li\u003e\n  \u003cli\u003eApply multiple thin coats using the EZ Touch conical nozzle for control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? VHT Caliper Paint Gloss Clear 11 oz suits car enthusiasts, professional detailers, restoration shops, and DIYers who want a resilient, glossy protective layer for brake components. It’s intended for anyone restoring or upgrading calipers, rotors, and drums who needs a quick-drying, heat-tolerant clear coat that improves appearance and helps guard against everyday wear. Follow the manufacturer’s prep and safety instructions for the best long-term results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is VHT Caliper Paint Gloss Clear heat resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it uses ceramic resins and withstands intermittent temperatures up to 900°F (482°C).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can handle a painted caliper?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The finish is touch-dry in about 30 minutes and typically handleable after 1 hour.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592721858745,"sku":"B000CPJLV2","price":56.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-caliper-paint-gloss-clear-aerosol-front.jpg?v=1790567120"},{"product_id":"vht-caliper-paint-for-brake-calipers-satin-black-11-oz-heat-resistant-ceramic-finish","title":"VHT Caliper Paint for Brake Calipers — Satin Black 11 oz, Heat-Resistant Ceramic Finish","description":"\u003cp\u003e\u003cstrong\u003eVHT Caliper Paint Satin Black is a heat-resistant spray coating formulated to protect and finish brake calipers, rotors and drums with a durable satin black surface.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for automotive and motorcycle detailing, this 11 oz aerosol delivers a factory-style satin finish while resisting the high temperatures and harsh conditions brake components face. The formula uses ceramic-modified resins to tolerate intermittent heat up to 900°F (482°C) and provides fast drying, chemical resistance and protection against chipping and brake dust. Proper surface prep and application technique are important for a long-lasting result.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT Caliper Paint hold up to brake heat and use?\u003c\/h3\u003e\n\u003cp\u003eThe satin black formula is engineered for intermittent temperatures up to 900°F, using ceramic resins that stabilize the coating under thermal stress. It resists fading and breakdown so the finish stays intact through repeated heating and cooling cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCeramic-modified resins tolerate up to 900°F intermittently\u003c\/li\u003e\n  \u003cli\u003eFormulated to resist chipping from road debris and braking forces\u003c\/li\u003e\n  \u003cli\u003eProtects against brake dust accumulation and chemical exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surface prep and drying times should I expect?\u003c\/h3\u003e\n\u003cp\u003eGood adhesion starts with clean, degreased and abraded metal—remove loose paint, rust and oil before spraying. The paint dries quickly to touch and can be handled in about an hour, allowing for efficient turnaround when refinishing calipers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDry to touch in ~30 minutes under typical conditions\u003c\/li\u003e\n  \u003cli\u003eHandleable after approximately 1 hour\u003c\/li\u003e\n  \u003cli\u003eBest results when applied over a properly cleaned and scuffed surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the application and what tools come with the can?\u003c\/h3\u003e\n\u003cp\u003eThe 11 oz aerosol is convenient for DIY or shop use and includes an EZ Touch conical nozzle for improved control and reduced fishtailing. It sprays evenly for smooth coverage, but thin, multiple coats yield the most uniform satin finish and durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e11 oz aerosol with EZ Touch conical spray nozzle for precision\u003c\/li\u003e\n  \u003cli\u003eApply light, overlapping passes for consistent finish\u003c\/li\u003e\n  \u003cli\u003eMultiple thin coats recommended instead of a single heavy coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work on other brake parts besides calipers?\u003c\/h3\u003e\n\u003cp\u003eYes—VHT Caliper Paint is suitable for calipers, rotors and drums where a heat-resistant protective coating is desired. It’s formulated to adhere to metal surfaces commonly found in braking systems when applied with proper preparation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for use on calipers, rotors and drums\u003c\/li\u003e\n  \u003cli\u003eCreates a durable satin finish that resists road and weather exposure\u003c\/li\u003e\n  \u003cli\u003eNot intended as a friction-material treatment—avoid pads and linings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: VHT Caliper Paint Satin Black (11 oz) is aimed at car and motorcycle enthusiasts, restoration shops and DIY detailers who want a resilient, heat-tolerant satin finish on brake components. If you need a fast-drying, chip-resistant coating that withstands high brake temperatures and improves the look of your braking hardware, this product offers a practical balance of performance and ease of use—provided you follow recommended surface preparation and application steps.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is VHT Caliper Paint heat resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ceramic-modified formula resists intermittent heat up to 900°F (482°C).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can handle parts after spraying?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s dry to the touch in about 30 minutes and typically handleable after one hour.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592721924281,"sku":"B000CPJLVW","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-caliper-paint-satin-black-front-can.jpg?v=1790567120"},{"product_id":"vht-caliper-paint-spray-gloss-gold-11-oz-high-heat-ceramic-infused-durable-finish","title":"VHT Caliper Paint Spray Gloss Gold 11 oz — High-Heat, Ceramic-Infused Durable Finish","description":"\u003cstrong\u003eVHT Caliper Paint Gloss Gold 11 oz is a high-heat, durable spray coating formulated to protect and finish brake calipers, rotors and drums with a glossy gold finish.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned for automotive enthusiasts and professional detailers, this VHT caliper paint delivers a bright, long-lasting gloss that resists the extreme temperatures and abrasive conditions found around braking components. It combines ceramic-infused resins for heat resistance up to 900°F (482°C) intermittent with a fast-drying formula and an EZ Touch conical nozzle for controlled application. Proper surface preparation ensures the best adhesion and longevity.\u003c\/p\u003e\n\n\u003ch3\u003eHow hot can the paint withstand near brakes?\u003c\/h3\u003e\n\u003cp\u003eThe ceramic resin formulation tolerates intermittent heat exposure up to 900°F (482°C), making it suitable for calipers, rotors and drums that see high operating temperatures. It’s engineered to avoid failure from thermal stress during typical and spirited driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat resistance: up to 900°F (482°C) intermittent\u003c\/li\u003e\n  \u003cli\u003eFormulated for braking component environments\u003c\/li\u003e\n  \u003cli\u003eCeramic resins enhance thermal stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly does it dry and become ready to handle?\u003c\/h3\u003e\n\u003cp\u003eVHT Caliper Paint dries to the touch in about 30 minutes and can be handled after roughly 1 hour under normal conditions. Full cure and ultimate durability will improve over time and with proper bake or conditioning as recommended for painted brake parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDry to touch: ~30 minutes\u003c\/li\u003e\n  \u003cli\u003eHandle time: ~1 hour\u003c\/li\u003e\n  \u003cli\u003eAllow extended cure for maximum chemical and chip resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and prep steps are recommended for best results?\u003c\/h3\u003e\n\u003cp\u003eThe product is intended for metal brake calipers, rotors and drums. Successful adhesion depends on removing grease, rust and loose paint, and scuffing bare metal for mechanical keying before spraying. Follow safety and drying guidelines for a durable finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse on brake calipers, rotors and drums\u003c\/li\u003e\n  \u003cli\u003eRemove contaminants, rust and old coating first\u003c\/li\u003e\n  \u003cli\u003eScuff surface, wipe clean, then apply thin, even coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this paint resist chips, chemicals and brake dust?\u003c\/h3\u003e\n\u003cp\u003eYes — the VHT formulation is developed to resist chipping, common automotive chemicals and abrasive brake dust when properly applied and cured. It provides a hard, glossy surface that stands up to road and garage conditions better than ordinary paints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResists chipping and common chemicals\u003c\/li\u003e\n  \u003cli\u003eDurable finish that reduces visible brake dust buildup\u003c\/li\u003e\n  \u003cli\u003eFast-drying and abrasion-resistant surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This spray is aimed at car owners, restorers and performance shops wanting a professional-looking, heat-tolerant gold finish on brake hardware. If you’re painting calipers on a daily driver, show car or track machine and need a quick, durable visual upgrade with proven thermal properties, VHT Caliper Paint in Gloss Gold is a practical choice. Always follow recommended prep, safety and curing steps for the best long-term performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use VHT Caliper Paint on hot brakes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The paint tolerates intermittent temperatures up to 900°F (482°C), but apply to cool parts and allow proper curing before driving.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many coats are recommended for calipers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Apply several light, even coats until coverage is uniform; thin coats reduce runs and improve adhesion and durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592721891513,"sku":"B000CPIN8O","price":56.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-caliper-paint-gloss-gold-front-can.jpg?v=1790567121"},{"product_id":"vht-brake-caliper-paint-bright-blue-11-oz-900-f-heat-resistant-ceramic-fast-dry","title":"VHT Brake Caliper Paint — Bright Blue 11 oz, 900°F Heat-Resistant Ceramic Fast-Dry","description":"\u003cp\u003e\u003cstrong\u003eVHT SP732 Bright Blue Brake Caliper Paint is a heat-tolerant, fast-drying aerosol finish formulated to protect and color brake calipers, rotors, and drums while resisting chipping, chemicals, and brake dust.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 11-ounce aerosol delivers a vivid bright-blue finish designed for automotive brake components. Formulated with ceramic-rich resins and engineered for intermittent temperatures up to 900°F (482°C), the coating stands up to the high-heat environment around calipers and other braking hardware. The spray is simple to apply with the EZ Touch conical nozzle for controlled coverage, dries quickly to the touch, and creates a durable layer when fully cured. Proper surface preparation—cleaning, degreasing, and removing loose rust—is important to get the best adhesion and longevity.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this paint cope with extreme heat from braking?\u003c\/h3\u003e\n\u003cp\u003eThe VHT SP732 formulation contains ceramic resins that provide intermittent heat resistance up to 900°F (482°C), which helps the coating retain color and adhesion under heavy braking. It is developed specifically for areas near the brake assembly where temperatures spike, so the finish is less likely to blister or discolor from short bursts of high heat.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCeramic-enriched formula resists high temperatures.\u003c\/li\u003e\n\u003cli\u003eMaintains color stability under intermittent heat spikes.\u003c\/li\u003e\n\u003cli\u003eSuitable for calipers, rotors, and drums exposed to heat cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the finish stand up to road grime, brake dust, and chemicals?\u003c\/h3\u003e\n\u003cp\u003eThis caliper paint is engineered to withstand common automotive contaminants and mechanical wear. It offers resistance to chipping and chemical exposure, so the bright-blue finish stays cleaner longer and resists abrasion from brake dust and everyday road debris.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFormulated to resist chipping and flaking during use.\u003c\/li\u003e\n\u003cli\u003eRepels common automotive chemicals and brake dust buildup.\u003c\/li\u003e\n\u003cli\u003eDurable surface that helps maintain a showroom look under normal conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quick and easy is application and drying?\u003c\/h3\u003e\n\u003cp\u003eThe aerosol comes with an EZ Touch conical nozzle for smoother aiming and more consistent coverage, which is helpful when spraying awkward caliper shapes. It dries to the touch in about 30 minutes and can be handled roughly after about an hour, allowing for faster reassembly than slower-drying coatings. For best results, follow recommended surface prep and apply multiple light coats rather than one heavy coat.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEZ Touch conical nozzle for accurate spraying and control.\u003c\/li\u003e\n\u003cli\u003eDry to touch in ~30 minutes; handle in ~1 hour under normal conditions.\u003c\/li\u003e\n\u003cli\u003eBest results achieved with light, even coats and proper prep.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts can I safely paint with this product?\u003c\/h3\u003e\n\u003cp\u003eWhile this spray is optimized for brake calipers, it’s formulated to perform on a variety of brake-related parts that see frequent heat exposure. Use it on calipers, certain rotor faces (where recommended by the vehicle manufacturer), drums, and other metal brake hardware, bearing in mind surface prep and masking for components that should not be coated.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for brake calipers and many drum and rotor surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks on clean, bare metal and properly prepped surfaces.\u003c\/li\u003e\n\u003cli\u003eMask nearby components that must remain uncoated, like pads and sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers, detailers, and DIY enthusiasts who want a long-lasting, eye-catching bright-blue finish on brake hardware will benefit from VHT SP732. It’s a practical choice for restoring appearance on older components or customizing new calipers, provided you follow thorough surface preparation and masking steps prior to spraying.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is VHT SP732 safe for brake calipers exposed to high temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s formulated with ceramic resins for intermittent heat resistance up to 900°F (482°C), suitable for calipers and similar brake hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can reassemble wheels after painting?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The paint is touch-dry in about 30 minutes and can be handled after roughly 1 hour; follow full cure recommendations before heavy use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592723398841,"sku":"B000CPCRMW","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-sp732-front-can-bright-blue.jpg?v=1790567151"},{"product_id":"vht-caliper-paint-gloss-bright-yellow-11-oz-heat-resistant-ceramic-formula-ez-touch-nozzle","title":"VHT Caliper Paint Gloss Bright Yellow, 11 oz — Heat‑Resistant Ceramic Formula, EZ Touch Nozzle","description":"\u003cp\u003e\u003cstrong\u003eVHT Caliper Paint in Bright Yellow is a heat‑resistant aerosol finish formulated to protect and color brake calipers while withstanding temperatures up to 900°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for automotive enthusiasts and professional detailers, this 11 oz spray delivers a glossy, durable coating specially engineered for brake components. Its ceramic‑enhanced resins resist extreme heat, road chemicals, and brake dust so the finish stays vibrant under heavy use. Fast drying and easy to apply, the formula includes an EZ Touch conical nozzle for precise spraying on calipers, rotors, and drums. Proper surface preparation is important to achieve the longest lasting result.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT Caliper Paint handle high temperatures and driving stress?\u003c\/h3\u003e\n\u003cp\u003eThe formula uses ceramic resins that tolerate intermittent temperatures up to 900°F (482°C), minimizing bubbling, cracking, and fading during normal and spirited driving. It’s formulated to maintain adhesion and gloss even when exposed to repeated heat cycles.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCeramic‑enhanced resins for high heat resistance\u003c\/li\u003e\n  \u003cli\u003eEngineered to resist chipping from road debris and brake dust\u003c\/li\u003e\n  \u003cli\u003eMaintains color and gloss through thermal cycling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow quickly will the calipers be ready after painting?\u003c\/h3\u003e\n\u003cp\u003eVHT Caliper Paint dries rapidly so you can reassemble wheels sooner. The surface becomes dry to the touch in about 30 minutes and can be handled after roughly one hour, though full chemical and mechanical cure continues afterward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDry to the touch: ~30 minutes under recommended conditions\u003c\/li\u003e\n  \u003cli\u003eSafe to handle\/reinstall after ≈1 hour\u003c\/li\u003e\n  \u003cli\u003eAllow additional cure time before heavy use for best durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat preparation and parts can I use this paint on?\u003c\/h3\u003e\n\u003cp\u003eCareful prep is essential for a durable finish: remove loose rust, old paint, grease, and brake fluid contaminants, then clean and dry the surface. This paint is intended for brake calipers, rotors and drums, and performs best when applied to a clean, bare or primed metal surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStrip or sand to remove loose coatings and corrosion\u003c\/li\u003e\n  \u003cli\u003eClean with solvent and ensure surfaces are dry\u003c\/li\u003e\n  \u003cli\u003eWorks on calipers, rotors, drums, and other brake components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and technique give the best finish?\u003c\/h3\u003e\n\u003cp\u003eThe included EZ Touch conical nozzle helps you control spray flow for even coverage and reduced overspray. Hold the can at the recommended distance, apply several light coats rather than one heavy coat, and allow proper flash time between passes for a smooth, glossy result.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse EZ Touch conical nozzle for precision and control\u003c\/li\u003e\n  \u003cli\u003eSpray several thin coats, keeping the can moving\u003c\/li\u003e\n  \u003cli\u003eObserve manufacturer’s flash and drying intervals for best adhesion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? VHT Caliper Paint in Bright Yellow suits car owners, customizers, and professional detailers who want a long‑lasting, high‑temperature color finish on brake hardware. If you’re restoring a track car, upgrading the look of a daily driver, or providing detail services that demand durability and rapid turnaround, this product gives a balance of heat resistance, chemical tolerance, and a glossy, eye‑catching appearance. Always follow safe painting practices and proper surface prep to maximize longevity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is VHT Caliper Paint safe for high‑temperature brake parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Its ceramic resins resist intermittent heat up to 900°F (482°C), designed to withstand the temperatures calipers see during driving.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can reinstall the wheel after spraying?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Surface is dry to the touch in about 30 minutes and can be handled in roughly one hour; allow extra cure time before heavy use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592725397689,"sku":"B000CPAVIY","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-caliper-paint-bright-yellow-front-can.jpg?v=1790567178"},{"product_id":"vht-caliper-paint-gloss-orange-11-oz-high-heat-brake-caliper-finish-900-f-resistant","title":"VHT Caliper Paint — Gloss Orange 11 oz high-heat brake caliper finish, 900°F resistant","description":"\u003cstrong\u003eVHT Caliper Paint in Gloss Orange is a high-heat, long-lasting aerosol finish formulated to protect and cosmetically enhance brake calipers without chipping or fading.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned for custom automotive detailing, this 11 oz can delivers a bright gloss orange finish that withstands intermittent temperatures up to 900°F (482°C). The formula bonds to metal brake components, resists brake dust and chemicals, and dries quickly for efficient application. Proper surface preparation is essential to achieve optimal adhesion and durability.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT Caliper Paint resist high temperatures and daily wear?\u003c\/h3\u003e\n\u003cp\u003eThe paint uses a heat-resistant resin and pigments engineered for intermittent exposure up to 900°F, helping prevent heat-related breakdown. It also offers resistance to chipping, chemical exposure, and brake dust so the finish stays intact under normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated intermittent heat resistance: 900°F (482°C)\u003c\/li\u003e\n  \u003cli\u003eFormulated to withstand road chemicals and brake contaminants\u003c\/li\u003e\n  \u003cli\u003eGloss finish maintains color and sheen under stress\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the recommended drying and handling timeline when painting calipers?\u003c\/h3\u003e\n\u003cp\u003eVHT Caliper Paint dries quickly to the touch and becomes handleable in a short window, letting you finish a project faster. Allow adequate cure time before reassembling wheels to ensure the coating has set and will resist scuffs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDry to touch: approximately 30 minutes\u003c\/li\u003e\n  \u003cli\u003eSafe to handle: about 1 hour, depending on conditions\u003c\/li\u003e\n  \u003cli\u003eFull cure time varies with temperature and humidity—longer in cool or damp environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare and apply this caliper paint for best results?\u003c\/h3\u003e\n\u003cp\u003eCareful surface preparation is critical: remove grease, brake dust, and loose rust, then scuff the surface for better adhesion. Apply thin, even coats from the recommended distance and allow each coat to flash before adding the next to avoid runs and ensure uniform coverage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean: degrease and remove contaminants thoroughly\u003c\/li\u003e\n  \u003cli\u003eScuff: light sanding or abrasive pad for adhesion\u003c\/li\u003e\n  \u003cli\u003eApply: multiple thin coats, following label spray distance and pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this paint protect against chipping and chemical exposure?\u003c\/h3\u003e\n\u003cp\u003eThe gloss orange caliper paint is formulated to resist chipping, common road chemicals, and brake dust, extending the visual life of the caliper finish. While durable, longevity depends on proper prep, application, and driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResistant to chipping and everyday road chemicals\u003c\/li\u003e\n  \u003cli\u003eRepels brake dust to maintain appearance longer\u003c\/li\u003e\n  \u003cli\u003ePerformance improves with correct surface preparation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e VHT Caliper Paint Gloss Orange 11 oz is intended for automotive enthusiasts, custom detailers, and mechanics who want a bright, durable finish on brake calipers that survives high heat and routine road exposure. It's suitable for DIY projects and professional shops where fast-drying, heat-resistant results are required—provided surfaces are properly cleaned and prepped before use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is VHT Caliper Paint heat resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It withstands intermittent temperatures up to 900°F (482°C), suitable for brake component exposure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long until I can handle painted calipers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The paint is dry to the touch in about 30 minutes and generally handleable in one hour, depending on conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592725430457,"sku":"B000CPIN8E","price":56.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-caliper-paint-gloss-orange-front-can.jpg?v=1790567178"},{"product_id":"vht-flameproof-high-temp-coating-spray-flat-orange-11-oz-ceramic-silicone-2000-f-heat-resistant","title":"VHT Flameproof High-Temp Coating spray — Flat Orange 11 oz, ceramic-silicone, 2000°F heat resistant","description":"\u003cp\u003e\u003cstrong\u003eVHT Flameproof Coating (Flat Orange, 11 oz) is a silicone-ceramic aerosol formula that protects and restores metal surfaces exposed to extreme heat up to 2000°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis high-temperature spray is engineered to renew headers, manifolds, turbo housings and other exhaust components where prolonged heat and thermal cycling cause flaking, oxidation and surface degradation. The flat orange finish provides a durable, heat-resistant protective layer that blends into engine bays and undercarriage components while resisting peeling and blistering when properly cured.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT Flameproof Coating stand up to extreme temperatures?\u003c\/h3\u003e\n\u003cp\u003eThe product uses ceramic-reinforced silicone resins designed to tolerate intermittent peaks up to 2000°F. That allows it to survive direct exposure on exhaust parts and turbo housings that see very high localized heat. Proper surface prep and following the recommended curing steps are required for the coating to reach its rated resistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCeramic-silicone chemistry resists thermal breakdown\u003c\/li\u003e\n  \u003cli\u003eRated for intermittent exposure up to 2000°F\u003c\/li\u003e\n  \u003cli\u003eFormulated for metal exhaust components and turbo housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat application and cure steps give the best performance?\u003c\/h3\u003e\n\u003cp\u003eFor durable results, clean and degrease the surface, remove loose rust or flaking scale, and apply light, even coats while maintaining the recommended distance. The spray dries to the touch quickly and becomes handleable soon after, but full heat curing according to the product instructions unlocks maximum adhesion and heat resistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDry to touch in about 30 minutes; handle in roughly 1 hour\u003c\/li\u003e\n  \u003cli\u003eApply multiple thin coats instead of a single heavy coat\u003c\/li\u003e\n  \u003cli\u003eFollow VHT's heat-curing procedure to achieve full thermal tolerance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere is this coating most useful on vehicles and equipment?\u003c\/h3\u003e\n\u003cp\u003eVHT Flameproof is intended for parts exposed to concentrated heat and thermal cycling such as exhaust headers, manifolds, mufflers, turbines and exhaust valves. It is especially useful when corrosion or coating failure has begun and a heat-stable protective layer is needed to extend service life and improve visual appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for headers, exhaust manifolds and turbo housings\u003c\/li\u003e\n  \u003cli\u003eWorks on engine bay components that see intermittent extreme heat\u003c\/li\u003e\n  \u003cli\u003eHelps protect against flaking, oxidation and surface deterioration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical features should installers expect during use?\u003c\/h3\u003e\n\u003cp\u003eThe spray includes an EZ Touch nozzle for controlled application and a flat orange finish that blends into many engine and chassis finishes. Because it’s an aerosol product, expect quick tack time and easy recoat; however, mechanical cleaning and proper curing are important to achieve long-term performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEZ Touch spray nozzle for precise, comfortable application\u003c\/li\u003e\n  \u003cli\u003eFlat orange color for a muted, factory-appearing finish\u003c\/li\u003e\n  \u003cli\u003eQuick tack and handling times improve workflow on multi-part jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Flameproof Coating in flat orange is aimed at mechanics, custom shops, restorers and DIY enthusiasts who need a proven, heat-tolerant coating for exhaust systems, turbo components and other metal surfaces subjected to extreme temperatures. Choose this product if you need a ceramic-silicone formula that renews heat-damaged surfaces, provides a consistent flat orange finish, and, when correctly cured, withstands intense intermittent heat exposure.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can VHT Flameproof withstand continuous 2000°F exposure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The coating resists intermittent peaks up to 2000°F; continuous exposure at that temperature may degrade performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before the coated part can see heat after spraying?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Surface is dry to touch in ~30 minutes and handleable in ~1 hour, but follow the heat-cure procedure for full tolerance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592779530425,"sku":"B000CPCRDQ","price":55.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-flameproof-front-aerosol.jpg?v=1790568027"},{"product_id":"vht-flameproof-high-temp-coating-spray-for-exhaust-engine-parts-flat-white-11-oz-ceramic","title":"VHT Flameproof High-Temp Coating Spray for Exhaust \u0026 Engine Parts — Flat White 11 oz, Ceramic","description":"\u003cstrong\u003eVHT Flameproof Coating in flat white is a high-temperature ceramic aerosol that protects and refreshes exhaust and engine components, resisting intermittent heat up to 2000°F.\u003c\/strong\u003e\n\u003cp\u003eIf your headers, manifolds, turbo housings or exhaust valves need a durable finish that endures extreme heat, this 11 oz VHT formula provides a protective ceramic-silicone layer designed for automotive and industrial high-temperature applications. The flat white color offers a clean, low-sheen appearance while the aerosol EZ Touch nozzle makes application easier in tight or awkward spaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT Flameproof coating perform under extreme heat?\u003c\/h3\u003e\n\u003cp\u003eThe coating uses ceramic-reinforced resins and silicone components to withstand intermittent temperatures up to 2000°F without blistering or rapid breakdown. It’s formulated specifically for parts exposed to combustion and exhaust heat rather than continuous furnace immersion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for intermittent exposure to 2000°F (1093°C)\u003c\/li\u003e\n  \u003cli\u003eCeramic-silicone chemistry resists chipping and flaking\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct-fire areas like exhaust and turbo housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and parts are appropriate for this spray?\u003c\/h3\u003e\n\u003cp\u003eUse this coating on metal components that see high thermal cycling: headers, manifolds, mufflers, turbine housings and exhaust valves. It adheres best to clean, degreased metal and is not intended for painted plastics or non-metallic substrates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for steel and cast iron exhaust parts\u003c\/li\u003e\n  \u003cli\u003eWorks on turbo housings and valvetrain components\u003c\/li\u003e\n  \u003cli\u003eNot recommended for flexible or heat-sensitive plastics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply and cure VHT Flameproof for best results?\u003c\/h3\u003e\n\u003cp\u003eShake the can thoroughly, spray thin, even coats using the EZ Touch nozzle, and allow touch-dry times between passes. The product feels dry to the touch in about 30 minutes and can be handled after roughly one hour, but following a proper heat-cure schedule improves durability and adhesion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDry to touch in about 30 minutes; handle in about 1 hour\u003c\/li\u003e\n  \u003cli\u003eApply multiple light coats rather than one heavy coat\u003c\/li\u003e\n  \u003cli\u003eComplete curing requires controlled heat cycles for maximum life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this coating change the look of my parts and how long will it last?\u003c\/h3\u003e\n\u003cp\u003eThe flat white finish gives a subdued, low-gloss appearance that can refresh oxidized or discolored components. Longevity depends on operating temperatures, exposure frequency, and proper surface prep and curing; when applied and cured correctly it significantly extends service life of high-heat parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlat white provides a low-sheen, uniform finish\u003c\/li\u003e\n  \u003cli\u003eProper surface prep and curing increase lifespan\u003c\/li\u003e\n  \u003cli\u003ePerformance tied to operating conditions and maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Technicians, DIY mechanics, performance tuners and fabricators working on engines, exhaust systems, turbochargers and other components that face intermittent extreme heat will benefit most from VHT Flameproof Coating. Choose this 11 oz flat white aerosol when you need a ceramic-silicone protective finish applied with an easy-spray nozzle and cured for long-lasting heat resistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can VHT Flameproof withstand 2000°F continuously?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the coating is rated for intermittent exposure up to 2000°F; continuous immersion at that temperature is not recommended.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can reassemble parts after spraying?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The spray is dry to the touch in about 30 minutes and can be handled in roughly 1 hour; full heat curing improves durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592779759801,"sku":"B000CPJLHG","price":59.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-flameproof-flat-white-front-can.jpg?v=1790568027"},{"product_id":"vht-sp999-night-shade-lens-tint-spray-black-smoked-10-oz-translucent-high-coverage-finish","title":"VHT SP999 Night Shade Lens Tint Spray — Black Smoked 10 oz, Translucent High-Coverage Finish","description":"\u003cp\u003e\u003cstrong\u003eVHT SP999 Night Shade is a 10 oz aerosol lens tint that darkens vehicle light lenses to a smoked black appearance while allowing the original light color to shine through when illuminated.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis high-coverage aerosol from VHT is formulated specifically to tint plastic light lenses—such as tail lights, fog lights, and turn signals—giving your vehicle a sleek, smoked look without permanently replacing housings. The spray lays down an even, translucent black film that reads dark when lights are off yet preserves visibility and original lamp color when the lights are active. It’s an economical option for styling and light customization and is commonly used by enthusiasts who want a cohesive, low-profile rear-end aesthetic.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT SP999 affect the appearance of my lights?\u003c\/h3\u003e\n\u003cp\u003eOnce applied, the SP999 tint creates a deep smoked finish that visually darkens lenses while maintaining light output color when activated. The result is a stealthy, factory-custom look without changing bulbs or housings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduces a uniform black-smoke film on plastic lenses.\u003c\/li\u003e\n  \u003cli\u003eLenses appear dark at rest but reveal red\/amber when lit.\u003c\/li\u003e\n  \u003cli\u003eSuitable for tail lights, turn signals, and fog light lenses.\u003c\/li\u003e\n  \u003cli\u003eOne 10 oz can covers several small-to-medium lenses depending on coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surface prep and application steps give the best finish?\u003c\/h3\u003e\n\u003cp\u003eProper surface cleaning and sanding ensure adhesion and a smooth finish. Apply multiple light coats rather than one heavy pass to avoid runs, and allow recommended dry time between layers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean lenses thoroughly to remove wax, grease, and contaminants.\u003c\/li\u003e\n  \u003cli\u003eLightly scuff with fine sandpaper for improved bonding if necessary.\u003c\/li\u003e\n  \u003cli\u003eSpray several thin, even coats from the recommended distance.\u003c\/li\u003e\n  \u003cli\u003eAllow full cure per instructions before handling or reinstalling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill tinting with SP999 change light visibility or legality?\u003c\/h3\u003e\n\u003cp\u003eThe aerosol creates a translucent tint that typically preserves visible light color and function, but local regulations vary. Verify vehicle lighting rules in your area before applying and adjust opacity or placement to maintain compliance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTint appears black when off but lets the bulb’s color show when lit.\u003c\/li\u003e\n  \u003cli\u003eOpacity depends on number of coats—less coats = lighter tint.\u003c\/li\u003e\n  \u003cli\u003eCheck regional vehicle codes for taillight and indicator tinting laws.\u003c\/li\u003e\n  \u003cli\u003ePartial tinting or aligning tint away from required lights can help comply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the finish and what maintenance does it need?\u003c\/h3\u003e\n\u003cp\u003eVHT’s automotive-grade formula resists typical road conditions, but longevity depends on prep, application, and exposure. Avoid abrasive cleaners and high-pressure washing on freshly tinted lenses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResists everyday road grime and UV when properly cured.\u003c\/li\u003e\n  \u003cli\u003eHand wash gently; avoid harsh polishes or aggressive scrubbing.\u003c\/li\u003e\n  \u003cli\u003eTouch up or reapply over time if fading or chipping appears.\u003c\/li\u003e\n  \u003cli\u003eStore spare cans in a cool, dry place to maintain shelf life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT SP999 Night Shade is designed for car and truck owners, automotive detailers, and enthusiasts who want a cost-effective way to achieve a smoked-lens look without replacing light assemblies. It’s ideal for DIYers comfortable with surface prep and aerosol application, and for anyone seeking a reversible styling option that keeps original lamp color visible when lights are on. Always confirm local regulations before tinting required signaling lights.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is VHT SP999 reversible?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The tint can be removed with plastic-safe paint strippers or by sanding and polishing, making it a non-permanent styling option.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many coats are recommended?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Apply 3–5 light coats for an even smoked finish, allowing proper dry time between coats for best durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592815542457,"sku":"B000CPCRS6","price":60.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-night-shade-front-can.jpg?v=1790568399"},{"product_id":"vht-wrinkle-plus-coating-spray-for-metal-flat-red-11-oz-heat-resistant-textured-finish","title":"VHT Wrinkle Plus Coating spray for metal — Flat Red 11 oz, heat-resistant textured finish","description":"\u003cp\u003e\u003cstrong\u003eVHT Wrinkle Plus Coating in flat red is a heat-resistant, textured spray finish that creates a deep, wrinkle-like appearance and durable protection for metal surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for automotive and metalwork projects, this 11 oz aerosol delivers a rich, non-reflective red texture that hides imperfections while resisting heat up to 350°F (177°C). The formula bonds to metal substrates and withstands grease, degreasers, weathering, rust and chipping, making it a practical choice for components exposed to mechanical and environmental wear.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this coating hold up near hot engine parts?\u003c\/h3\u003e\n\n\u003cp\u003eVHT Wrinkle Plus is formulated to tolerate continuous temperatures up to 350°F (177°C), making it suitable for many under-hood and near-exhaust applications. It maintains its textured finish without softening or running when used within the specified temperature range.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTemperature resistance: up to 350°F (177°C).\u003c\/li\u003e\n  \u003cli\u003eStable texture under heat — won’t sag at recommended temperatures.\u003c\/li\u003e\n  \u003cli\u003eGood for valve covers, alternators, and similar engine components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat metal parts can I spray with this flat red finish?\u003c\/h3\u003e\n\n\u003cp\u003eThis wrinkle coating is intended for a wide range of metal parts on vehicles and equipment, providing both styling and protective benefits. It adheres well to cleaned, prepared metal and is commonly used where a low-gloss, textured look is desired.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTypical applications: valve covers, metal dashboards, glove boxes, starters.\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for door panels, shifters, alternators, and firewalls.\u003c\/li\u003e\n  \u003cli\u003eWorks over properly prepped bare metal or previously painted surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the finish against chemicals and weather?\u003c\/h3\u003e\n\n\u003cp\u003eThe product resists fading, grease, degreasers and severe weather conditions, offering long-term aesthetic and protective performance outdoors and in service environments. It forms a tough film that resists rust, corrosion, chipping and cracking under normal use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eColorfast formula resists fading from sunlight and heat exposure.\u003c\/li\u003e\n  \u003cli\u003eRepels grease and holds up to common degreasers when cured.\u003c\/li\u003e\n  \u003cli\u003eProvides resistance to rust, corrosion, chipping and cracking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surface preparation and application tips give the best result?\u003c\/h3\u003e\n\n\u003cp\u003eProper surface prep ensures adhesion and a uniform wrinkle texture: remove rust, oil and loose old paint, then scuff and clean the metal before spraying. Apply light, even coats and allow recommended flash times to build the textured effect without runs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClean: remove grease, wax, and loose rust or paint.\u003c\/li\u003e\n  \u003cli\u003eScuff with abrasive pad or sandpaper for better adhesion.\u003c\/li\u003e\n  \u003cli\u003eApply multiple thin coats, holding the can at the recommended distance.\u003c\/li\u003e\n  \u003cli\u003eFollow product cure times for maximum durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Wrinkle Plus Flat Red is aimed at car restorers, customizers and metalworkers who want a durable, low-gloss textured finish that hides surface flaws and tolerates elevated temperatures. It’s ideal for hobbyists updating engine bays and interior metal trim as well as professionals seeking a resilient, decorative coating for functional parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use VHT Wrinkle Plus on previously painted metal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if the existing paint is clean, scuffed and well-adhered; remove loose paint and grease before applying for best adhesion.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long until the coating is fully cured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Cure times vary by conditions, but allow several hours to dry to touch and follow the product label for full cure guidance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592827142329,"sku":"B001GX9U3S","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-wrinkle-plus-flat-red-front-can.jpg?v=1790568563"},{"product_id":"vht-wheel-paint-gloss-clear-11-oz-high-gloss-clearcoat-for-steel-aluminum-wheels-chip-resistant-protection","title":"VHT Wheel Paint Gloss Clear 11 oz — High-Gloss Clearcoat for Steel \u0026 Aluminum Wheels, Chip-Resistant Protection","description":"\u003cp\u003e\u003cstrong\u003eVHT Wheel Paint Gloss Clear 11 oz is a high-gloss protective spray formulated to restore and shield standard and custom wheels from chipping, fading, and oxidation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eVHT Wheel Paint in gloss clear is designed for automotive wheels that face harsh conditions—road salt, brake dust, gravel, and UV exposure. The aerosol delivers a durable clearcoat that bonds to both steel and aluminum wheel surfaces, improving gloss and helping maintain the wheel’s appearance up to approximately 250°F (121°C). It’s intended as a finish coat over properly prepared painted or bare wheel surfaces and is valued for chip resistance and long-lasting shine.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT Wheel Paint protect my wheels on the road?\u003c\/h3\u003e\n\u003cp\u003eThe formulation creates a protective clear layer that resists chipping and helps guard against surface oxidation. While not impervious to heavy impact, it reduces visual wear from common road debris and corrosive elements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChip-resistant clearcoat reduces paint flaking from small impacts.\u003c\/li\u003e\n  \u003cli\u003eProtects metal surfaces from oxidation when applied correctly.\u003c\/li\u003e\n  \u003cli\u003eHeat tolerance up to 250°F (121°C) for brake-area exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this on both steel and aluminum wheels?\u003c\/h3\u003e\n\u003cp\u003eYes—VHT Wheel Paint gloss clear is formulated for compatibility with steel and aluminum wheel substrates. For best adhesion and longevity, prepare the surface by cleaning, sanding as needed, and using recommended primer or base paint systems before applying the clearcoat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks over properly prepared painted or bare steel and aluminum.\u003c\/li\u003e\n  \u003cli\u003eUse appropriate primers or base coats for optimal bonding.\u003c\/li\u003e\n  \u003cli\u003eFollow recommended drying and cure times between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat finish and durability can I expect after application?\u003c\/h3\u003e\n\u003cp\u003eThe product yields a glossy finish that enhances shine while adding a durable protective layer. Durability depends on surface prep, number of coats, and road conditions; when applied per instructions it offers improved resistance to fading and cracking compared with uncoated surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-gloss clear finish for enhanced wheel appearance.\u003c\/li\u003e\n  \u003cli\u003eResists cracking and noticeable fading under normal conditions.\u003c\/li\u003e\n  \u003cli\u003eMultiple thin coats recommended for even coverage and strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I apply VHT Wheel Paint gloss clear for best results?\u003c\/h3\u003e\n\u003cp\u003ePreparation is key: degrease, remove contaminants, and sand to create a uniform surface. Apply light, even coats in a well-ventilated area, allowing recommended flash and dry times between passes to avoid runs and ensure full film build.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean wheels thoroughly to remove grease, brake dust, and salts.\u003c\/li\u003e\n  \u003cli\u003eSand or scuff glossy areas for adhesion; remove dust before spraying.\u003c\/li\u003e\n  \u003cli\u003eSpray multiple light coats; allow adequate drying time between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Wheel Paint Gloss Clear 11 oz is for car owners, enthusiasts, restoration shops, or DIYers looking to refinish or protect steel and aluminum wheels without specialized equipment. It fits projects that need a durable glossy clearcoat to improve appearance and help resist everyday road damage, provided users follow proper surface preparation and application steps.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is VHT Wheel Paint gloss clear heat resistant?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It withstands temperatures up to around 250°F (121°C), suitable for normal brake-area heat exposure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I apply it over existing wheel paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if the existing paint is cleaned, degreased, and scuffed for adhesion, the clearcoat can be sprayed over it.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592896053433,"sku":"B000CPIMWQ","price":56.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-gloss-clear-front-aerosol.jpg?v=1790569380"},{"product_id":"vht-wheel-paint-gloss-ford-argent-silver-11-oz-aerosol-chip-resistant-high-gloss-finish","title":"VHT Wheel Paint — Gloss Ford Argent Silver 11 oz aerosol, chip‑resistant high‑gloss finish","description":"\u003cp\u003e\u003cstrong\u003eVHT Wheel Paint in Gloss Ford Argent Silver is an aerosol wheel coating that restores and protects steel or aluminum wheels with a durable, chip-resistant silver finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you're refreshing OEM rims or customizing aftermarket wheels, this 11 oz spray delivers a glossy Argent Silver color formulated to resist chipping, cracking and fading from road debris and weather. Designed for temperatures up to 250°F (121°C), the formula adds an oxidation-resistant layer that improves appearance while helping wheels stand up to everyday driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is the finish on busy roads?\u003c\/h3\u003e\n\u003cp\u003eThe paint is engineered to handle routine exposure to salt, sand, brake dust and small road impacts without losing adhesion or shine. It creates a resilient topcoat that reduces visible wear and helps prevent surface corrosion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh chip- and abrasion-resistance for curb and road protection\u003c\/li\u003e\n  \u003cli\u003eHeat tolerance up to 250°F \/ 121°C for wheel operating environments\u003c\/li\u003e\n  \u003cli\u003eDesigned to slow oxidation that dulls metal over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this on both steel and aluminum wheels?\u003c\/h3\u003e\n\u003cp\u003eYes — the VHT formula bonds to common wheel metals when proper surface preparation is followed. It works for factory-finish steel rims and alloy wheels, providing consistent color and adhesion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for steel and aluminum wheel substrates\u003c\/li\u003e\n  \u003cli\u003eRequires cleaning, de-greasing and light sanding for best results\u003c\/li\u003e\n  \u003cli\u003eMultiple thin coats give the most even, long-lasting finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat steps give a professional-looking gloss finish?\u003c\/h3\u003e\n\u003cp\u003ePreparation and application technique determine outcome. Clean thoroughly, remove loose paint or corrosion, scuff the surface lightly, and spray steady, overlapping passes. Allow proper flash and cure times between coats for a uniform gloss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean with brake cleaner or degreaser and dry completely\u003c\/li\u003e\n  \u003cli\u003eSand rough areas with fine-grit paper and wipe residue away\u003c\/li\u003e\n  \u003cli\u003eApply several light coats from the recommended distance, letting each dry before the next\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long will the color and gloss last outdoors?\u003c\/h3\u003e\n\u003cp\u003eLongevity depends on driving conditions and maintenance, but the product is formulated to hold color and gloss under typical road exposure. Routine cleaning and avoiding harsh chemicals will help preserve the finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulated to resist fading from sunlight and road contaminants\u003c\/li\u003e\n  \u003cli\u003eRegular washing removes corrosive road salts and brake dust\u003c\/li\u003e\n  \u003cli\u003ePeriodic inspection and touch-ups extend service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Wheel Paint in Gloss Ford Argent Silver is aimed at car owners, DIY enthusiasts and professional detailers who want a durable, factory-style silver finish on steel or aluminum wheels. It's a practical choice for restoring curb appeal, repairing small cosmetic damage, or standardizing wheel color on project cars — best suited to users comfortable with basic surface prep and spray-application techniques.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFeatures: Chip Resistant; For Steel or Aluminum Wheels; Protects the wheel surface from oxidation\u003c\/li\u003e\n  \u003cli\u003eContainer: 11 oz aerosol for easy, controlled application\u003c\/li\u003e\n  \u003cli\u003eTemperature rating: safe up to 250°F \/ 121°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this VHT paint safe for alloy wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It's formulated for both steel and aluminum wheels when proper prep and application are followed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature can the painted wheels tolerate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The cured coating is rated to withstand up to 250°F (121°C) in normal wheel operating conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592902049977,"sku":"B000CPJLLW","price":56.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-wheel-paint-front-can-argentsilver.jpg?v=1790569439"},{"product_id":"vht-wheel-paint-gloss-black-11-oz-durable-chip-resistant-wheel-finish","title":"VHT Wheel Paint Gloss Black, 11 oz — Durable Chip‑Resistant Wheel Finish","description":"\u003cp\u003e\u003cstrong\u003eVHT Wheel Paint in gloss black is a high-build aerosol finish formulated to restore and protect steel or aluminum wheels while resisting chipping, cracking, and fading.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for everyday road use, this 11 oz aerosol delivers a glossy, factory-style appearance while forming a protective barrier against oxidation, brake dust, salt, sand, and road debris. It tolerates temperatures up to 250°F (121°C) and is suitable for refinishing or customizing rims on cars, trucks, and motorcycles. The formula balances adhesion, durability, and visual depth so wheels look renewed without complex application steps.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT Wheel Paint protect my wheels from daily wear?\u003c\/h3\u003e\n\u003cp\u003eThe coating creates a resilient finish that shields bare metal from corrosion and surface damage. Its advance in chip resistance reduces the frequency of touch-ups and helps maintain a uniform gloss under repeated exposure to road hazards.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForms a protective layer to limit oxidation on steel and aluminum\u003c\/li\u003e\n  \u003cli\u003eResists chipping and cracking from gravel and curb contact\u003c\/li\u003e\n  \u003cli\u003eGloss finish repels brake dust for easier cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this paint on both steel and aluminum wheels?\u003c\/h3\u003e\n\u003cp\u003eYes — the VHT formula is compatible with standard steel and aluminum wheel substrates when proper surface preparation is followed. For best adhesion, clean, sand, and degrease surfaces before spraying and apply in thin, even coats.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks on factory-finish and bare-metal wheels after prep\u003c\/li\u003e\n  \u003cli\u003eSuitable for refinishing or updating aftermarket rims\u003c\/li\u003e\n  \u003cli\u003eApply primer when necessary for severely corroded areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat application and performance details should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe paint sprays from an 11 oz aerosol can in multiple light coats to build a smooth, glossy film. It cures to withstand normal road temperatures up to 250°F (121°C) and offers long-term color retention when maintained properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e11 oz aerosol for controlled, even application\u003c\/li\u003e\n  \u003cli\u003eRecommended to spray in thin passes to avoid runs\u003c\/li\u003e\n  \u003cli\u003eAllow adequate flash and full cure time per instructions for best durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I prepare and maintain wheels painted with VHT?\u003c\/h3\u003e\n\u003cp\u003ePreparation is key: remove loose corrosion, clean grease and brake residue, and scuff the surface for adhesion. After painting and curing, wash with mild soap and avoid harsh abrasives to preserve gloss and protective properties.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStrip loose paint and rust; sand to a feathered edge\u003c\/li\u003e\n  \u003cli\u003eUse a solvent cleaner or degreaser before painting\u003c\/li\u003e\n  \u003cli\u003eHand wash gently and inspect regularly for chips or damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Wheel Paint gloss black is ideal for car and truck owners, restoration hobbyists, and custom builders who want a durable, high-gloss finish on steel or aluminum wheels without professional equipment. It suits anyone looking to refresh worn rims, protect against road conditions, or give a cohesive, showroom-style look to aftermarket wheels with a user-friendly aerosol application.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is VHT Wheel Paint suitable for high-temperature use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It tolerates continuous temperatures up to 250°F (121°C), suitable for normal wheel operating conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a primer before using this paint on wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Primer is recommended for heavily corroded or bare metal surfaces to improve adhesion and long-term durability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67592902213817,"sku":"B000CPJLLM","price":56.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-wheel-paint-gloss-black-front-can.jpg?v=1790569440"},{"product_id":"vht-engine-metallic-spray-paint-flat-gold-flake-11-oz-high-heat-chemical-resistant-finish","title":"VHT Engine Metallic Spray Paint — Flat Gold Flake 11 oz, High-Heat \u0026 Chemical-Resistant Finish","description":"\u003cp\u003e\u003cstrong\u003eVHT Engine Metallic Flat Gold Flake is an 11 oz high-temperature, chemical-resistant aerosol paint formulated to give engine parts a durable, sparkly gold finish that withstands heat and harsh chemicals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for automotive engines and driveline components, this spray combines urethane and ceramic resins to deliver long-lasting protection and a metallic look. It resists corrosion, salt spray, gasoline additives and common degreasers, and it endures intermittent temperatures up to 650°F (343°C). Use as part of a complete VHT engine coating system—primer, color, and clear—for best performance.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this paint hold up to high temperatures and engine use?\u003c\/h3\u003e\n\u003cp\u003eThe formulation contains heat-resistant components that tolerate intermittent exposure up to 650°F, making it suitable for many hot engine surfaces. Proper curing—either by running the engine to normal operating temperature or baking parts at about 200°F—helps the coating reach its intended durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated intermittent temperature resistance: up to 650°F (343°C)\u003c\/li\u003e\n  \u003cli\u003eUrethane and ceramic resin blend for heat stability\u003c\/li\u003e\n  \u003cli\u003eCures with engine heat or by controlled baking\u003c\/li\u003e\n  \u003cli\u003eDries to the touch in ~30 minutes; cures overnight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this on all engine and drivetrain parts?\u003c\/h3\u003e\n\u003cp\u003eThis aerosol is formulated for many under-hood and driveline components where high heat and chemical exposure are expected. Common applications include headers, valve covers, blocks, starters, transmissions, pumps and brackets, but avoid surfaces that routinely exceed intermittent temperature limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for headers, valve covers, engine blocks, starters\u003c\/li\u003e\n  \u003cli\u003eSuitable for transmissions, differential covers, water pumps\u003c\/li\u003e\n  \u003cli\u003eNot recommended for parts exceeding stated temperature rating\u003c\/li\u003e\n  \u003cli\u003eWorks best when used over VHT engine primer and finished with engine clear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow resistant is the finish to chemicals, salt, and gasoline additives?\u003c\/h3\u003e\n\u003cp\u003eThe paint resists corrosion and common chemical exposures encountered in automotive environments, including salt spray and many gasoline or additive contaminants. Its chemical resistance makes it practical for parts exposed to road salts, fuels, oils, and cleaning solvents, although highly aggressive chemicals can still affect any coating over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulated to stand up to salt spray and corrosion\u003c\/li\u003e\n  \u003cli\u003eResistant to gasoline blends and many degreasers\u003c\/li\u003e\n  \u003cli\u003ePart of VHT’s multi-coat system for added protection\u003c\/li\u003e\n  \u003cli\u003eDurability improves when proper curing instructions are followed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? VHT Engine Metallic Flat Gold Flake (11 oz) is aimed at car enthusiasts, mechanics, restorers and DIYers who want a decorative yet functional metallic finish on engine and drivetrain parts. Choose this product if you need a spray that combines an eye-catching gold flake appearance with heat and chemical resistance—especially when used as part of VHT’s primer-color-clear engine coating system for best longevity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does VHT Engine Metallic require special curing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It reaches full properties after normal engine operating heat or by baking parts at about 200°F; allow the paint to dry overnight first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this safe for exhaust headers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s suitable for many headers but only for intermittent exposure up to 650°F; avoid constant higher temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67593417654457,"sku":"B00296IF6E","price":59.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-engine-metallic-flat-gold-flake-front-can.jpg?v=1790575355"},{"product_id":"vht-roll-bar-chassis-paint-gloss-black-11-oz-single-step-epoxy-ceramic-enriched-durable-finish","title":"VHT Roll Bar \u0026 Chassis Paint Gloss Black 11 oz — Single‑Step Epoxy, Ceramic‑Enriched Durable Finish","description":"\u003cstrong\u003eVHT Roll Bar \u0026amp; Chassis Paint in gloss black is a single-step epoxy aerosol that delivers a tough, weather-resistant finish for roll cages, chassis parts, and metal frames without the need for a separate primer.\u003c\/strong\u003e\n\n\u003cp\u003eThis high-build aerosol coating is formulated for automotive structural components where durability matters. It lays down a hard, glossy film that stands up to salt, chemical exposure, and moisture while resisting corrosion. The formula contains ceramic-enriched resins designed to tolerate elevated temperatures and provide long-term protection on metal surfaces commonly found under vehicles or in motorsport environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this paint perform on roll bars and welded frames?\u003c\/h3\u003e\n\u003cp\u003eThe paint is engineered to adhere directly to prepared bare metal and previously painted surfaces, creating a resilient layer that resists chipping and flaking under mechanical stress. Its epoxy chemistry cures to a firm film that helps maintain appearance and protection in demanding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-step application—no separate primer required on clean metal.\u003c\/li\u003e\n  \u003cli\u003eHard, impact-resistant finish reduces surface abrasion.\u003c\/li\u003e\n  \u003cli\u003eGloss black appearance restores a uniform look to chassis and cages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it stand up to road salt, chemicals, and heat?\u003c\/h3\u003e\n\u003cp\u003eThe formulation offers strong chemical and corrosion resistance suitable for exposed underbody parts and off-road use. Ceramic-enhanced resins increase thermal tolerance so the coating resists softening or discoloration from heat sources near engines or exhaust sections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResists salt and water-driven corrosion for longer life.\u003c\/li\u003e\n  \u003cli\u003eCeramic resins tolerate temperatures up to about 250°F.\u003c\/li\u003e\n  \u003cli\u003eStable when exposed to common automotive fluids and cleaners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare and apply the aerosol for best results?\u003c\/h3\u003e\n\u003cp\u003eSurface preparation is the most important step: remove loose rust, scale, oil, and contaminants and roughen glossy factory finishes for better adhesion. Apply light, even passes from the recommended distance and allow proper flash times between coats to build a smooth, durable film.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean and degrease surfaces; strip loose rust and scale first.\u003c\/li\u003e\n  \u003cli\u003eShake can thoroughly and spray in thin passes for even coverage.\u003c\/li\u003e\n  \u003cli\u003eFollow specified dry times between coats; allow full cure before heavy use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Roll Bar \u0026amp; Chassis Paint is aimed at mechanics, fabricators, restoration enthusiasts, and motorsport teams needing a reliable protective topcoat for welded frames, roll cages, and exposed chassis components. It suits anyone who wants a high-gloss, corrosion-resistant finish that simplifies application by eliminating a separate primer layer while still providing durable protection in harsh automotive environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a primer before using VHT Roll Bar \u0026amp; Chassis Paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No primer is required on clean, bare metal; proper surface prep improves adhesion and longevity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature can the coating tolerate?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The ceramic-enhanced formula resists heat up to about 250°F (121°C).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67593453928633,"sku":"B000CPCRMC","price":57.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-rollbar-front-view-gloss-black.jpg?v=1790575707"},{"product_id":"vht-engine-metallic-spray-paint-flat-titanium-silver-blue-11-oz-high-heat-chemical-resistant-finish","title":"VHT Engine Metallic spray paint — Flat Titanium Silver Blue, 11 oz high-heat, chemical-resistant finish","description":"\u003cp\u003e\u003cstrong\u003eVHT Engine Metallic Flat Titanium Silver Blue is a high-temperature, chemical-resistant aerosol finish designed to protect and beautify engine components while withstanding intermittent temperatures up to 650°F.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aerosol is formulated for harsh under-hood environments where heat, oil, and chemicals are constant challenges. Combining urethane and ceramic resins, the coating gives metal parts a sparkling metallic appearance while providing long-term durability against corrosion, salt spray, and common automotive fluids. Use it as part of a multi-step engine coating system—primer, color, and clear—for best adhesion and longevity.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this paint hold up under heat and chemicals?\u003c\/h3\u003e\n\u003cp\u003eThe formula is engineered to resist intermittent engine temperatures up to 650°F (343°C) and is chemically resilient against fuel additives, degreasers, and road salts. The urethane-ceramic blend helps the finish maintain adhesion and appearance where ordinary paints would fail.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWithstands intermittent temperatures up to 650°F\u003c\/li\u003e\n  \u003cli\u003eResists common automotive chemicals and degreasers\u003c\/li\u003e\n  \u003cli\u003eReduces corrosion and salt spray damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat engine parts can I safely use it on?\u003c\/h3\u003e\n\u003cp\u003eApply this spray to a wide range of drivetrain and accessory parts that face heat and exposure. It’s suitable for both stationary components and parts that experience moderate thermal cycling once fully cured.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeaders, valve covers, engine blocks, and starters\u003c\/li\u003e\n  \u003cli\u003eBrackets, water pumps, transmissions, and differential covers\u003c\/li\u003e\n  \u003cli\u003eAccessories where a metallic finish and chemical resistance are desired\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply and cure VHT Engine Metallic for best results?\u003c\/h3\u003e\n\u003cp\u003eSurface preparation, correct layering, and proper curing are essential for the coating to reach its designed performance. Follow a system approach: clean and degrease, prime with an engine primer, apply the color coats, then finish with an engine clear if added protection is wanted.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDegrease and remove loose rust or scale before painting\u003c\/li\u003e\n  \u003cli\u003eApply engine primer first, then two light color coats for uniform coverage\u003c\/li\u003e\n  \u003cli\u003eCure by running the engine to normal operating temperature or heat parts to 200°F for faster development of full properties\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long until the paint is ready for service?\u003c\/h3\u003e\n\u003cp\u003eThe aerosol dries to the touch quickly but reaches full hardness after proper curing. Surface dryness is usually about 30 minutes, with overnight physical drying; chemical and temperature exposure resistance develop after engine-temperature curing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDries to the touch in approximately 30 minutes\u003c\/li\u003e\n  \u003cli\u003eSurface dry overnight under ambient conditions\u003c\/li\u003e\n  \u003cli\u003eFull performance achieved after engine-temperature curing or a controlled 200°F bake\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Engine Metallic Flat Titanium Silver Blue is aimed at car builders, restoration enthusiasts, performance shops, and DIY mechanics who need a decorative metallic finish that also protects engine and drivetrain components from heat, chemicals, and corrosion. It’s ideal when durability and appearance both matter—use it on exposed engine parts, accessories, and any metal surface around the engine bay where a resilient, heat-tolerant coating is required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this paint handle continuous engine exhaust temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — it’s rated for intermittent temperatures up to 650°F; continuous exposure at very high temps may degrade the finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need primer and clear for best results?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — use an engine primer first and optional engine clear afterward for improved adhesion, appearance, and protection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67593629663417,"sku":"B00296D1HM","price":61.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-engine-metallic-flat-titanium-silver-blue-front-can.jpg?v=1790577258"},{"product_id":"vht-all-weather-epoxy-spray-paint-satin-black-11-oz-no-primer-heat-resistant-durable-finish","title":"VHT All-Weather Epoxy Spray Paint Satin Black 11 oz – No-Primer, Heat-Resistant Durable Finish","description":"\u003cp\u003e\u003cstrong\u003eVHT SP652 All-Weather Epoxy Satin Black is a one-step aerosol epoxy coating that gives a durable, porcelain-like finish without primer and withstands intermittent heat up to 250°F (121°C).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for automotive and general-purpose projects, this 11 oz aerosol delivers a satin black, baked-on appearance with chemical, corrosion, rust, and salt resistance. The formula is ready to use from the can—no separate primer or oven curing required—and dries to the touch in about 30 minutes, with full hardness forming overnight. The spray features an easy-to-use nozzle for consistent coverage on metal parts, panels, tools, and suspension components that need a protective, long-lasting coat.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this paint perform on car parts and outdoor hardware?\u003c\/h3\u003e\n\u003cp\u003eSP652 is formulated to resist common environmental and mechanical stresses encountered on vehicles and outdoor equipment. It provides a protective layer that stands up to moisture, road salt, and light chemical exposure while maintaining a satin appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for suspension parts, kick panels, tools, trim, and accessories\u003c\/li\u003e\n  \u003cli\u003eResists corrosion, rust, salt, and many chemicals for extended protection\u003c\/li\u003e\n  \u003cli\u003ePorcelain-like satin finish that hides wear and provides uniform coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the drying and application details I should know?\u003c\/h3\u003e\n\u003cp\u003eThe coating is engineered for straightforward application: shake well, spray evenly, and allow to dry. It's dry to the touch in roughly 30 minutes under normal conditions and reaches thorough dryness overnight; no heat curing is necessary.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-step system—no primer required on properly prepared surfaces\u003c\/li\u003e\n  \u003cli\u003eDry to touch in ~30 minutes; fully dry overnight in typical conditions\u003c\/li\u003e\n  \u003cli\u003eEasy-to-use spray nozzle for uniform coverage and reduced runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan it handle heat and what temperatures are safe?\u003c\/h3\u003e\n\u003cp\u003eSP652 All-Weather Epoxy is formulated for intermittent heat exposure rather than continuous extreme temperatures. It retains its protective properties and finish appearance when exposed to moderate engine bay heat and other elevated-temperature environments up to the product's limit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntermittent temperature resistance up to 250°F (121°C)\u003c\/li\u003e\n  \u003cli\u003eNot intended for sustained, extreme heat applications like exhaust headers\u003c\/li\u003e\n  \u003cli\u003eIdeal for areas with occasional elevated temperatures such as engine compartments and nearby components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT SP652 is aimed at DIYers, automotive enthusiasts, and hobbyists who want a durable, satin-black epoxy coating without the complexity of priming or baking. If you need a corrosion-resistant, chemically tolerant finish for suspension parts, tools, trim, or exterior panels—especially when occasional heat exposure is expected—this aerosol provides a practical, pro-looking solution with minimal setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a primer before using VHT SP652?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No primer is required on properly prepared, clean surfaces; this is a one-step epoxy coating.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What maximum temperature can this spray withstand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It tolerates intermittent heat up to 250°F (121°C), not continuous extreme heat.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67595454447801,"sku":"B000CPIN34","price":53.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-sp652-satin-black-front-can.jpg?v=1790587763"},{"product_id":"vht-white-pearl-spray-paint-8-oz-automotive-candy-coat-ready-to-spray-lacquer","title":"VHT White Pearl Spray Paint — 8 oz Automotive Candy Coat, Ready-to-Spray Lacquer","description":"\u003cp\u003e\u003cstrong\u003eVHT BTY1626 White Pearl is an 8-ounce ready-to-spray automotive candy coat that adds pearlescent depth and a high-gloss sheen to metal and painted surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis single-can finish is formulated to deliver translucent pearlescent coverage that lets metallic base layers shimmer through, creating multi-dimensional color and luminous highlights. The lacquer-based formula sprays smoothly, dries quickly, and is designed for automotive and motorcycle projects where a candy-style, jewel-like appearance is desired. It arrives pre-mixed for convenience—no reducing or special blending is required—so you can apply additional coats as needed without waiting for a re-coat window.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT White Pearl create that layered candy finish?\u003c\/h3\u003e\n\u003cp\u003eThe White Pearl topcoat is translucent by design, so it enhances a metallic or colored base beneath rather than completely masking it. Light passes through the pearl layer to the reflective base, producing depth, subtle color shifts, and iridescent highlights that change with viewing angle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTranslucent pearl binder for depth and dimension\u003c\/li\u003e\n  \u003cli\u003eReflective effect when applied over metallic or bright base coats\u003c\/li\u003e\n  \u003cli\u003eBuildable coats let you dial intensity and sheen\u003c\/li\u003e\n  \u003cli\u003eSuitable for automotive and motorcycle surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surface prep and application steps give the best results?\u003c\/h3\u003e\n\u003cp\u003eGood surface prep is essential: clean, sand, and prime as needed to ensure adhesion and a smooth finish. Shake the can thoroughly, hold about 6–10 inches from the surface, and apply several light, even passes to avoid runs and orange peel. Allow tack time between coats and follow with clearcoat for extra durability if desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDegrease and remove contaminants before sanding\u003c\/li\u003e\n  \u003cli\u003eUse 400–600 grit for feathering and smoothing edges\u003c\/li\u003e\n  \u003cli\u003eSpray light, overlapping passes to prevent sags\u003c\/li\u003e\n  \u003cli\u003eTop with compatible clearcoat for added protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this spray paint work without mixing or reducers?\u003c\/h3\u003e\n\u003cp\u003eYes—this product is supplied ready to spray, eliminating the need for reducers or separate mixing. The factory-balanced lacquer formula is designed for consistent atomization straight from the can, which simplifies touch-ups and small-scale projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-mixed lacquer formula—no reducer required\u003c\/li\u003e\n  \u003cli\u003eConsistent spray pattern for easy application\u003c\/li\u003e\n  \u003cli\u003eQuick tack and dry times for faster re-coating\u003c\/li\u003e\n  \u003cli\u003eIdeal for spot repairs and full panel coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does it take to dry and can you buff it to a sheen?\u003c\/h3\u003e\n\u003cp\u003eDry time is relatively fast for a lacquer finish; surface tack will clear quickly and handling times are short compared with heavier coatings. Once fully cured, the paint can be polished or buffed to increase gloss and smoothness—particularly effective when sealed with a compatible clearcoat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast surface drying shortens project time\u003c\/li\u003e\n  \u003cli\u003eCan be buffed after full cure for a mirror-like shine\u003c\/li\u003e\n  \u003cli\u003eClearcoat enhances durability and polishability\u003c\/li\u003e\n  \u003cli\u003eAllow manufacturer-recommended cure times before compounding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: VHT BTY1626 White Pearl is intended for car and motorcycle enthusiasts, custom shops, and DIYers who want a pearlescent candy topcoat that accentuates metallic bases. It’s best suited for small to medium repair jobs, panel refinishes, and custom accents where depth, iridescence, and a high-gloss appearance are priorities. For best outcomes, pair it with a prepared metallic basecoat and a compatible clearcoat when long-term durability is important.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I spray VHT White Pearl directly over factory paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if you properly clean, sand, and prime the area; a metallic or bright base coat gives the best pearlescent effect.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a clearcoat over this pearlescent paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A clearcoat is recommended for added UV and scratch protection and to enhance gloss and polishability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67595488526521,"sku":"B00G75RZD2","price":53.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-white-pearl-front-can.jpg?v=1790588278"},{"product_id":"vht-nu-cast-iron-engine-coating-iron-engine-enamel-550-f-heat-resistant-chemical-chip-resistant","title":"VHT Nu-Cast Iron Engine Coating — Iron engine enamel, 550°F heat-resistant, chemical \u0026 chip resistant","description":"\u003cp\u003e\u003cstrong\u003eVHT Nu-Cast Iron Engine Coating is a durable urethane-ceramic enamel formulated to protect and finish engines and components up to 550°F (288°C) with excellent resistance to heat, chemicals, and corrosion.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for professional restorers, hobbyists and mechanics, VHT Nu-Cast Iron Engine Coating delivers a factory-style finish that stands up to modern fuels, salts and solvents. The formula combines ceramic and urethane resins to produce a tough surface that resists chipping, fading and chemical attack while matching many original equipment colors.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this coating protect engine parts under high temperatures?\u003c\/h3\u003e\n\u003cp\u003eVHT Nu-Cast Iron tolerates continuous temperatures up to 550°F (288°C), helping painted surfaces maintain appearance and adhesion in hot engine bays. The ceramic-urethane blend minimizes blistering and breakdown that can occur with lesser paints when exposed to heat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for continuous exposure to 550°F (288°C).\u003c\/li\u003e\n  \u003cli\u003eCeramic content improves thermal stability.\u003c\/li\u003e\n  \u003cli\u003eUrethane resins enhance film toughness and chip resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it resist chemicals, salt spray and modern gasoline additives?\u003c\/h3\u003e\n\u003cp\u003eThis coating is formulated to withstand salt spray, solvents, degreasers and fuel additives commonly encountered in service and restoration work. That chemical resistance helps preserve both appearance and substrate protection during routine maintenance and exposure to road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eResists common engine degreasers and cleaners.\u003c\/li\u003e\n  \u003cli\u003eFormulated to tolerate today's gasoline additives and oils.\u003c\/li\u003e\n  \u003cli\u003eReduced risk of corrosion where coatings remain intact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and applications are best for VHT Nu-Cast Iron?\u003c\/h3\u003e\n\u003cp\u003eUse this enamel on iron, steel and many engine accessories where heat and chemical resistance are essential. Ideal uses include engine blocks, valve covers, manifolds and restored components that require a durable, long-lasting finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngine blocks and cylinder heads (after proper prep).\u003c\/li\u003e\n  \u003cli\u003eValve covers, oil pans and manifolds.\u003c\/li\u003e\n  \u003cli\u003eAccessory brackets and hardware exposed to heat and fluids.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare and apply the product for best results?\u003c\/h3\u003e\n\u003cp\u003eSurface prep is critical: clean thoroughly, remove loose rust and oil, and use recommended primers for maximum adhesion. Apply in thin, even coats according to temperature and cure guidelines on the label, allowing recommended flash and cure times between coats.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDegrease and remove loose corrosion before painting.\u003c\/li\u003e\n  \u003cli\u003eUse compatible primers for bare metal when needed.\u003c\/li\u003e\n  \u003cli\u003eSpray or brush in light coats; follow label cure instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Nu-Cast Iron Engine Coating is aimed at vehicle restorers, professional mechanics and DIY enthusiasts who need a tough, heat-resistant finish that endures modern chemicals and environmental exposure. It's a practical choice when you want a near-factory appearance and long-term protection for engine components and exposed metal under-hood parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What maximum temperature can VHT Nu-Cast Iron withstand?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is rated for continuous exposure up to 550°F (288°C).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this enamel resistant to gasoline and degreasers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s formulated to resist modern gasoline additives, degreasers and salt spray.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67595525324985,"sku":"B000CPCRRW","price":54.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-nu-cast-iron-front-can.jpg?v=1790588931"},{"product_id":"vht-engine-enamel-spray-paint-gloss-chevy-orange-11-oz-high-heat-chemical-resistant-finish","title":"VHT Engine Enamel spray paint — Gloss Chevy Orange 11 oz, high-heat chemical-resistant finish","description":"\u003cstrong\u003eVHT Engine Enamel in Gloss Chevy Orange is a high-heat, chemical-resistant spray paint formulated to protect and finish engines, accessories, and exposed metal parts.\u003c\/strong\u003e\n\n\u003cp\u003eThis aerosol enamel blends urethane and ceramic resins to deliver a tough, long-lasting coating that resists heat, fuels, oils, and common shop chemicals. Designed for automotive use, it is suitable for engine blocks, valve covers, headers, starters, brackets, transmissions, and other metal components that need both protection and a showroom gloss. The product is part of a multi-step coating system—primer, color, and clear—to maximize adhesion and longevity, and it reaches full performance after proper curing at normal engine operating temperatures or by baking at recommended temperatures.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly does this paint dry and reach full performance?\u003c\/h3\u003e\n\u003cp\u003eThe enamel becomes touch-dry in about one hour under ideal conditions and sets overnight for handling. However, the coating's heat resistance and ultimate durability depend on proper curing, which typically occurs when the engine reaches normal operating temperature or when the painted part is heated to about 200°F.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTouch dry in ~1 hour under normal conditions\u003c\/li\u003e\n  \u003cli\u003eHandleable overnight for light handling\u003c\/li\u003e\n  \u003cli\u003eFinal properties achieved after engine run-time or 200°F bake\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill VHT Engine Enamel hold up against heat, chemicals, and corrosion?\u003c\/h3\u003e\n\u003cp\u003eYes — the formulation combines urethane toughness with ceramic-like heat resistance to endure high temperatures and repeated exposure to fuels, degreasers, and road salts. It’s engineered to resist rust and corrosion when applied over appropriate surfaces and primers, making it a practical choice for exposed engine components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWithstands high operating temperatures up to service limits\u003c\/li\u003e\n  \u003cli\u003eResists gasoline additives, oils, and common degreasers\u003c\/li\u003e\n  \u003cli\u003eFormulated to combat corrosion, rust, and salt spray\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts and applications are best for this Chevy Orange finish?\u003c\/h3\u003e\n\u003cp\u003eThis gloss orange enamel is intended for engine bays and mechanical parts where both protection and visual impact are desired. Typical uses include painted valve covers, engine blocks, headers, brackets, starters, water pumps, transmission housings, and differential covers—anywhere a durable, high-heat finish is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eValve covers and engine blocks for a vivid, durable look\u003c\/li\u003e\n  \u003cli\u003eHeaders and exhaust-adjacent parts that face higher heat\u003c\/li\u003e\n  \u003cli\u003eBrackets, starters, pumps, and transmission housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat preparation and system steps ensure the best result?\u003c\/h3\u003e\n\u003cp\u003eSurface preparation and using the complete VHT coating system improve adhesion and longevity. Clean and degrease metal thoroughly, repair or prime bare metal with the recommended VHT engine primer, apply the color enamel in thin, even coats, and use engine clear if added protection or gloss retention is desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThoroughly clean and remove oil, grease, and loose rust\u003c\/li\u003e\n  \u003cli\u003ePrime bare metal with VHT engine primer before color coats\u003c\/li\u003e\n  \u003cli\u003eApply multiple light coats, allow tack-free time between coats\u003c\/li\u003e\n  \u003cli\u003eCure by normal engine operation or heat to ~200°F for best properties\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: VHT Engine Enamel in Gloss Chevy Orange is aimed at automotive enthusiasts, mechanics, restorers, and performance builders who want a bright, durable finish on hot, exposed engine components. Choose this product when you need a sprayable, high-heat-resistant coating that stands up to oils, fuels, and shop chemicals while delivering a consistent, glossy factory-style appearance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this paint handle normal engine temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It achieves full performance after curing during normal engine operation or by heating parts to about 200°F.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a primer before using this enamel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For bare metal, use the recommended VHT engine primer to improve adhesion and long-term corrosion resistance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67595525193913,"sku":"B000CPJLIK","price":53.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-engine-enamel-front-can-chevy-orange.jpg?v=1790588931"},{"product_id":"vht-wheel-paint-satin-black-11-oz-aerosol-wheel-coating-chip-resistant-satin-finish","title":"VHT Wheel Paint Satin Black 11 oz — Aerosol Wheel Coating, Chip-Resistant Satin Finish","description":"\u003cp\u003e\u003cstrong\u003eVHT Wheel Paint in Satin Black (11 oz) is a high-performance aerosol paint formulated to restore and protect steel or aluminum wheels with a chip-resistant, satin finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re touching up curb dings or refinishing a full set, this aerosol delivers a durable coating that resists chipping, cracking, fading and oxidation. It’s designed for everyday driving conditions and provides protection against common wheel hazards like road salt, brake dust and debris. Rated for service temperatures up to 250°F (121°C), the formula balances toughness with a smooth satin look to refresh the wheel’s appearance without a glossy overcoat.\u003c\/p\u003e\n\n\u003ch3\u003eHow does VHT Wheel Paint improve wheel durability?\u003c\/h3\u003e\n\u003cp\u003eThe coating forms a resilient layer that helps prevent surface damage from chips, scratches and environmental exposure. This reduces the rate of visible wear and helps retain the wheel’s finish longer than bare metal or untreated paint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChip-resistant acrylic formula designed for impact resistance\u003c\/li\u003e\n  \u003cli\u003eProtects against oxidation to slow corrosion on steel or aluminum\u003c\/li\u003e\n  \u003cli\u003eStable finish under typical driving temperatures up to 250°F \/ 121°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this on both steel and aluminum wheels?\u003c\/h3\u003e\n\u003cp\u003eYes—VHT Wheel Paint is formulated to bond to both steel and aluminum wheel surfaces when used on properly prepared metal. Good surface prep ensures adhesion and a professional-looking finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks on factory and aftermarket wheels made from steel or aluminum\u003c\/li\u003e\n  \u003cli\u003eRequires cleaning, degreasing and scuffing before application\u003c\/li\u003e\n  \u003cli\u003eBest results when applied in light, even coats for full coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat finish and appearance should I expect after painting?\u003c\/h3\u003e\n\u003cp\u003eThe can produces a satin black finish—less reflective than gloss but smoother than flat paint—offering a modern, understated look. Satin camouflages minor imperfections while still showing clean lines and contours of the wheel design.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSatin black sheen for a refined, low-glare appearance\u003c\/li\u003e\n  \u003cli\u003eConceals small scratches and surface irregularities\u003c\/li\u003e\n  \u003cli\u003eColor and sheen consistency achieved by multiple thin coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply VHT Wheel Paint for best results?\u003c\/h3\u003e\n\u003cp\u003ePreparation and technique matter: clean wheels thoroughly, remove loose paint and rust, and sand the surface to promote adhesion. Apply several thin, overlapping coats from the recommended distance, allowing proper flash time between coats.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean with degreaser and remove baked-on brake dust and contaminants\u003c\/li\u003e\n  \u003cli\u003eSand or scuff glossy areas, then wipe with solvent before spraying\u003c\/li\u003e\n  \u003cli\u003eSpray multiple light coats, keeping the can 8–12 inches from the surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: VHT Wheel Paint Satin Black 11 oz is intended for DIY car enthusiasts, professional detailers and mechanics who want a durable, attractive finish for steel or aluminum wheels. It’s suitable for spot repairs, full wheel refinishes or color updating, and is ideal when you need a chip-resistant satin finish that protects against oxidation and everyday road wear.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this safe for high-temperature wheel areas?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The paint tolerates service temperatures up to 250°F (121°C), suitable for normal driving heat exposure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need primer before using VHT Wheel Paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Primer is recommended on bare metal or heavily corroded areas to improve adhesion and corrosion protection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"VHT","offers":[{"title":"Default Title","offer_id":67595579130041,"sku":"B000CPAV9I","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/vht-wheel-paint-satin-black-front-can.jpg?v=1790589993"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/vht-wheel-paint-satin-black-front-can.jpg?v=1790612631","url":"https:\/\/redleafauto.ca\/collections\/vht.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}