{"title":"Wocch","description":"\u003cp\u003eBrowse 20 Wocch products at RedLeaf Auto, including license plate frames \u0026amp; covers. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"wocch-front-license-plate-frame-for-dodge-ram-1500-2025-2026-black-abs-direct-fit-replacement-hardware-included","title":"Wocch Front License Plate Frame for Dodge Ram 1500 (2025–2026) - Black ABS Direct-Fit Replacement, Hardware Included","description":"\u003cp\u003e\u003cstrong\u003eWocch's front license plate frame is a direct-fit ABS replacement bracket designed to mount a front plate on compatible 2025–2026 Dodge Ram 1500 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement front bumper license plate holder (part #68566317AA \/ CH1068178) is supplied new in black and built to match factory dimensions for a seamless appearance. It arrives with the necessary screws and is designed for specific Ram 1500 trims—confirm compatibility before purchase to avoid ordering for Rebel RHO Tungsten or painted bumper variations, which it does not fit.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my 2025 or 2026 Ram 1500?\u003c\/h3\u003e\n\n\u003cp\u003eIf your truck is one of the listed trims—Big Horn, Laramie, Laramie Sport, Limited, Limited Longhorn, Lone Star, Sport, Tradesman, Tradesman HFE, or Special Service—this bracket is engineered to fit as a direct replacement. It replicates the OEM mounting points for an accurate install.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2025–2026 Ram 1500 models listed in the product details\u003c\/li\u003e\n  \u003cli\u003eReplaces part number 68566317AA \/ CH1068178\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Rebel RHO Tungsten or painted bumper versions\u003c\/li\u003e\n  \u003cli\u003eVerify year, trim, and OE number before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is the Wocch plate bracket?\u003c\/h3\u003e\n\n\u003cp\u003eThe bracket is molded from heavy-duty ABS plastic chosen for toughness and heat resistance, offering protection against cracking and fading over time. ABS also resists common road stresses like stone chips and temperature swings better than low-grade plastics.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature resistant ABS construction\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist fading and surface damage\u003c\/li\u003e\n  \u003cli\u003eWorks for everyday road conditions and seasonal weather\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how hard is installation?\u003c\/h3\u003e\n\n\u003cp\u003eEach package includes one front license plate bracket and the matching fastener screws so you have the hardware needed for a standard swap. Installation is straightforward for anyone comfortable with basic exterior trim work—no specialty tools required beyond a screwdriver or socket.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 x front license plate bracket, black finish\u003c\/li\u003e\n  \u003cli\u003eIncluded mounting screws and inserts\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on replacement using existing mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this match original appearance and alignment?\u003c\/h3\u003e\n\n\u003cp\u003eYes—the Wocch bracket is manufactured to align with factory bumper contours and mounting holes so the plate sits flush and looks factory-installed. The black color blends with standard bumper finishes, maintaining the truck’s original lines.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOEM-style fit and finish for a clean look\u003c\/li\u003e\n  \u003cli\u003ePlate sits level and centered per factory specs\u003c\/li\u003e\n  \u003cli\u003eSurface designed to minimize visible gaps or misalignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who own a 2025–2026 Dodge Ram 1500 in any supported trim and need a reliable, like-for-like replacement front license plate bracket. It’s aimed at owners repairing a damaged or missing mount, fleet managers maintaining service trucks, or anyone preferring a durable OEM-style part that installs quickly and looks factory-made. Always confirm vehicle trim and OE part number before purchasing to ensure proper fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this bracket compatible with Ram 1500 Rebel models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It does not fit Ram 1500 Rebel RHO Tungsten or painted bumper models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are installation screws included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes the license plate bracket plus the fastener screws and inserts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67586850914489,"sku":"B0G2RJPRV5","price":110.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-frame-front-view.jpg?v=1790494200"},{"product_id":"wocch-front-license-plate-frame-for-ford-super-duty-f-250-f-350-f-450-f-550-2023-2026-black-abs-no-drill-oem-fit","title":"Wocch Front License Plate Frame for Ford Super Duty F-250\/F-350\/F-450\/F-550 2023–2026 — Black ABS No-Drill OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eThe Wocch Front License Plate Frame is a no-drill, OEM-style bumper bracket engineered to mount a front plate on Ford F-250\/F-350\/F-450\/F-550 Super Duty 2023–2026 single-rear-wheel models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement bracket is molded from heavy-duty ABS to match the original fit and finish of Ford Super Duty bumpers. Designed specifically for model years 2023 through 2026 and referencing part numbers PC3Z-17A385-AA \/ PC3Z17A385AA \/ FO1068203, the Wocch piece slips into the factory bumper opening and secures the plate without altering the bumper or requiring drilling. It arrives as a single bracket ready to install, making it a straightforward restoration or upgrade for trucks that need a front plate mount.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my Ford Super Duty and how do I confirm compatibility?\u003c\/h3\u003e\n\n\u003cp\u003eThis mount fits Ford F-250 and F-350 Super Duty trucks for 2023–2026 and also fits F-450 and F-550 models in the same years — but only single rear wheel (SRW) versions. Before ordering, match your truck’s year, axle configuration, and the OEM part number shown on your old bracket.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible models: F-250, F-350 (2023–2026); F-450, F-550 (2023–2026)\u003c\/li\u003e\n  \u003cli\u003eOnly for single rear wheel (SRW) configurations\u003c\/li\u003e\n  \u003cli\u003eCross-check OE numbers: PC3Z-17A385-AA \/ PC3Z17A385AA \/ FO1068203\u003c\/li\u003e\n  \u003cli\u003eCompare photos and bumper cutout before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Wocch front license plate frame and what material is it made from?\u003c\/h3\u003e\n\n\u003cp\u003eThe bracket is produced from high-quality ABS plastic engineered for automotive use; ABS offers impact resistance and heat tolerance suitable for external bumper components. The surface is color-matched black and formulated to resist fading, so it integrates visually with the bumper and withstands everyday road conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial: heavy-duty ABS plastic\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature resistance to reduce warping\u003c\/li\u003e\n  \u003cli\u003eColor-fast black finish to limit visible fading\u003c\/li\u003e\n  \u003cli\u003eOEM-style molding for a factory appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and does this bracket require drilling?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is designed to be simple and non-destructive: the bracket mounts into the factory bumper opening and secures using existing attachment points, so no drilling is required. Typical installation can be done with basic tools and follows the original part’s placement, making it a quick replacement for a lost or damaged OEM holder.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eNo drilling or bumper modification needed\u003c\/li\u003e\n  \u003cli\u003eUses factory bumper cutout and existing fasteners\u003c\/li\u003e\n  \u003cli\u003eIncludes one bracket per package\u003c\/li\u003e\n  \u003cli\u003eFits as a direct replacement for the OEM part\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect when I receive the package and how do I check the part?\u003c\/h3\u003e\n\n\u003cp\u003eThe product ships as a single preformed license plate bracket in black. Inspect the part number molded or printed on the old bracket and compare the new piece visually to ensure shape and attachment points match before installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePackage contains: 1 x front license plate bracket\u003c\/li\u003e\n  \u003cli\u003eVisually compare part shape and mounting tabs to your bumper\u003c\/li\u003e\n  \u003cli\u003eConfirm OE number and bumper cutout alignment\u003c\/li\u003e\n  \u003cli\u003eContact seller if fitment appears inconsistent\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Wocch front license plate frame is intended for Ford Super Duty owners who need a like-for-like replacement for the factory front plate bracket on SRW (single rear wheel) F-250\/F-350\/F-450\/F-550 trucks from 2023–2026. It’s ideal for DIY installers, service shops completing bumper repairs, and drivers who want a clean, OEM-style plate mount without permanent modifications to the bumper. Always verify vehicle year, axle configuration, and OE part number before ordering to ensure proper fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bracket require drilling into my bumper?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it installs into the factory bumper opening and secures without drilling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2024 Ford F-350?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—if your 2024 F-350 is a single rear wheel model and matches OE numbers listed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67586950758585,"sku":"B0D2D2GS8N","price":106.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-frame-front-view_0f67404d-369b-4244-b18e-f3cdbfb7c8d7.jpg?v=1790497691"},{"product_id":"wocch-front-license-plate-bracket-for-chevy-silverado-2500-3500-hd-2015-2019-chrome-bumper-direct-fit-abs-with-hardware","title":"Wocch Front License Plate Bracket for Chevy Silverado 2500\/3500 HD 2015-2019 — Chrome Bumper Direct-Fit ABS with Hardware","description":"\u003cp\u003e\u003cstrong\u003eWocch's front license plate frame is a ready-to-install bumper bracket that replaces OEM part 22774440 (GM1068157) for 2015–2019 Chevy Silverado 2500\/3500 HD models with chrome front bumpers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Silverado's original front plate mount is missing, damaged, or incompatible after a repair, this Wocch replacement bracket offers a direct-fit solution engineered for the High Country, LT, LTZ and WT trims. Molded from high-temperature resistant ABS, it resists fading and stays stable under everyday road conditions. The package includes the plate bracket plus the mounting hardware needed for installation so you can restore factory appearance quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my Silverado model and bumper type?\u003c\/h3\u003e\n\u003cp\u003eThis bracket specifically fits 2015–2019 Chevrolet Silverado 2500 HD and 3500 HD models that have chrome front bumpers. It does not fit Silverados equipped with factory-painted front bumpers, so confirm the bumper finish before ordering. The item corresponds to OEM part number 22774440 (Partslink GM1068157) for a straightforward match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2015, 2016, 2017, 2018, 2019\u003c\/li\u003e\n  \u003cli\u003eCompatible models: Silverado 2500 HD and 3500 HD\u003c\/li\u003e\n  \u003cli\u003eTrims noted: High Country, LT, LTZ, WT\u003c\/li\u003e\n  \u003cli\u003eExcluded: factory-painted front bumpers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the bracket made of and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eThe Wocch front plate bracket is manufactured from high-quality ABS plastic formulated for heat resistance and long-term durability. That composition helps prevent discoloration and mechanical wear from road exposure. While not metal, the ABS design balances rigidity with impact resistance for everyday driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-temperature resistant ABS\u003c\/li\u003e\n  \u003cli\u003eFinish: matte black to match chrome-bumper assemblies\u003c\/li\u003e\n  \u003cli\u003eResists fading and light weathering\u003c\/li\u003e\n  \u003cli\u003eIncludes corrosion-resistant mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install the Wocch license plate holder?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be simple and to mirror the OEM mounting process. The bracket ships with the necessary hardware and mounts into the factory bumper location with basic hand tools. Most owners can complete the swap in under 30 minutes by following the visible bolt points and aligning the plates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 1 bracket and mounting hardware\u003c\/li\u003e\n  \u003cli\u003eTools typically required: screwdriver, socket set\u003c\/li\u003e\n  \u003cli\u003eEstimated install time: approximately 15–30 minutes\u003c\/li\u003e\n  \u003cli\u003eFits in original bumper mounting location for a factory look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this replace the OEM part number 22774440 (GM1068157)?\u003c\/h3\u003e\n\u003cp\u003eYes — this Wocch bracket is made to replace the OEM part 22774440 and matches the Partslink reference GM1068157 for the specified Silverado models. Verifying your current part number or bumper type prevents ordering the wrong bracket. If the numbers match, this bracket is intended as a drop-in replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM reference: 22774440\u003c\/li\u003e\n  \u003cli\u003ePartslink number: GM1068157\u003c\/li\u003e\n  \u003cli\u003eDesigned as a direct replacement for the listed Chevy Silverados\u003c\/li\u003e\n  \u003cli\u003eCheck existing part number and bumper finish before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Wocch front license plate bracket is ideal for Silverado owners who need a reliable OEM-style replacement for a damaged or missing front plate mount, collision repair shops restoring chrome-bumper rigs, and DIYers who value an exact-fit part that matches factory specifications. Choose this bracket if you drive a 2015–2019 Silverado 2500\/3500 HD with a chrome front bumper and want an easy-to-install, fade-resistant mounting solution that uses OEM part 22774440 (GM1068157).\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit a painted front bumper Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This bracket is for Silverado models with chrome front bumpers only and excludes factory-painted bumpers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does it include mounting hardware and match OEM part 22774440?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes the bracket plus hardware and is made to replace OEM part 22774440 (GM1068157).\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67587305439417,"sku":"B0FN44S9K2","price":106.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-frame-chevy-silverado-chrome-bumper-front-view.jpg?v=1790505226"},{"product_id":"wocch-front-license-plate-bracket-for-1988-2000-chevy-gmc-black-abs-direct-fit-hardware-included","title":"Wocch Front License Plate Bracket for 1988–2000 Chevy\/GMC (Black ABS) — Direct-Fit, Hardware Included","description":"\u003cp\u003e\u003cstrong\u003eWocch’s front license plate bracket is a direct-fit replacement mounting frame for many 1988–2000 Chevrolet, GMC and 1999–2000 Cadillac Escalade vehicles with a bumper impact\/molding strip.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis sturdy front bumper license plate holder replaces worn or missing brackets on classic C\/K, K, Silverado, Sierra, Blazer, Suburban, Tahoe, Yukon and Escalade models. Molded from high-temperature ABS plastic and supplied with mounting hardware, the bracket restores a factory-style fit and keeps your front plate secure without drilling or modification for compatible bumpers. It ships as a single unit ready to install and matches OEM part references so you can confirm fit before buying.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and model years will this bracket fit?\u003c\/h3\u003e\n\u003cp\u003eThis bracket fits many Chevy and GMC trucks, SUVs and certain Escalades manufactured between 1988 and 2000, specifically for bumpers equipped with an impact\/molding rub strip. The product listing includes a detailed model and submodel breakdown—use it to verify compatibility with your exact year and trim.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: C1500\/C2500\/C3500, K1500\/K2500\/K3500, Silverado and Sierra variants\u003c\/li\u003e\n  \u003cli\u003ePopular SUVs: Blazer, Suburban, Tahoe, Yukon (including many Denali-package models)\u003c\/li\u003e\n  \u003cli\u003e1999–2000 Cadillac Escalade models with the proper bumper molding\u003c\/li\u003e\n  \u003cli\u003eCheck OE numbers: 15990674, 15562770, 15627850, 68184, Partslink GM1068101\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is the Wocch bracket?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is manufactured from high-quality ABS engineered to withstand road temperatures, UV exposure and normal wear. ABS resists fading and cracking better than lower-grade plastics, so the bracket maintains appearance and function over time under typical driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-temperature resistant ABS plastic\u003c\/li\u003e\n  \u003cli\u003eFinish: black factory-style appearance to match bumpers with molding\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist fading, impact and routine environmental exposure\u003c\/li\u003e\n  \u003cli\u003eSupplied with hardware to reduce corrosion risk at the mount points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what’s included in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable using basic hand tools; the bracket replaces the factory mount and uses the included hardware for a secure fit. The bracket is designed for vehicles that already have the impact strip; if your bumper lacks that strip or holes, drill or modification may be required and is not covered by the part design.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: 1 front license plate bracket and matching mounting hardware\u003c\/li\u003e\n  \u003cli\u003eTools typically required: screwdriver, socket set or wrench\u003c\/li\u003e\n  \u003cli\u003eNo painting required—installed in original black finish\u003c\/li\u003e\n  \u003cli\u003eOEM-style fit for plug-and-play replacement on compatible bumpers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm this is the correct replacement part for my vehicle?\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, compare the OE\/partslink numbers and confirm your bumper has the impact\/molding rub strip noted in the listing. The product description lists specific model years and submodels—match those to your vehicle’s year, submodel and factory options to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify vehicle: year, make, model and submodel against the listing\u003c\/li\u003e\n  \u003cli\u003eCross-check OE numbers: 15990674, 15562770, 15627850, 68184, GM1068101\u003c\/li\u003e\n  \u003cli\u003eConfirm your bumper includes the molding\/impact strip feature\u003c\/li\u003e\n  \u003cli\u003eContact seller with photos or VIN for additional fit guidance if unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Wocch front license plate bracket is ideal for owners restoring or maintaining late-80s to 2000 Chevy and GMC trucks and SUVs, or for those replacing a broken or missing factory mount on compatible 1999–2000 Cadillac Escalades. If you want a durable, OEM-style replacement that preserves factory appearance and secures the front plate without complex modification, this bracket is a practical, cost-effective solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bracket fit my 1995 Chevy C2500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your 1995 C2500 has the bumper impact\/molding strip and matches listed submodels, it’s compatible; verify OE numbers and visuals before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is drilling required to install this bracket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No drilling is needed when replacing an OEM bracket on a compatible bumper with the impact strip; otherwise modifications may be required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67587314679993,"sku":"B0FN469GGD","price":90.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-frame-full-view.jpg?v=1790505679"},{"product_id":"wocch-front-license-plate-frame-for-gmc-sierra-1500-2022-2026-black-abs-direct-fit-mount-kit-with-screws","title":"Wocch Front License Plate Frame for GMC Sierra 1500 2022-2026 — Black ABS Direct-Fit Mount Kit with Screws","description":"\u003cp\u003e\u003cstrong\u003eWocch’s front license plate frame is a direct-fit OEM-style mounting bracket engineered to hold a front plate on GMC Sierra 1500 models from 2022 through 2026.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement front bumper license plate holder matches the original equipment geometry (part number 84877919 \/ GM1068251) and arrives as a complete kit with the mounting screws. Molded from robust ABS, the black finish resists heat and discoloration so it stays functional and discreet on the bumper. It’s designed for a straightforward swap-in installation without body modifications when used on compatible Sierra 1500 models.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my GMC Sierra 1500 model year?\u003c\/h3\u003e\n\u003cp\u003eThis plate holder suits GMC Sierra 1500 trucks from 2022, 2023, 2024, 2025 and 2026—excluding the 2022 Sierra 1500 Limited. Before ordering, compare the OE part number and the photos to your existing part to confirm compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits GMC Sierra 1500: 2022–2026 (not for 2022 Limited)\u003c\/li\u003e\n  \u003cli\u003eOE part number: 84877919; Partslink: GM1068251\u003c\/li\u003e\n  \u003cli\u003eVerify vehicle trim and bumper style to ensure an exact fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is the Wocch license plate bracket?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is injection-molded from heavy-duty ABS designed to tolerate temperature swings and outdoor exposure. The engineered plastic resists cracking, warping, and fading so the mount maintains appearance and function over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade of high-strength ABS for impact and UV resistance\u003c\/li\u003e\n  \u003cli\u003eBlack finish that resists discoloration and heat damage\u003c\/li\u003e\n  \u003cli\u003eRugged enough for road use and regular cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what’s included in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be simple: the bracket replaces the factory mount and uses the supplied screws to secure the plate. No special tools or bumper modifications are normally required when the part matches your OEM layout.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKit includes: 1 front license plate bracket and mounting screws\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct bolt-on replacement where the OEM bracket is used\u003c\/li\u003e\n  \u003cli\u003eTypical install requires only basic hand tools and a few minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering to avoid returns?\u003c\/h3\u003e\n\u003cp\u003eConfirm the part number on your current bracket and visually compare mounting points and dimensions with the product images. Double-check that your Sierra is not the 2022 Limited trim, which uses a different bumper configuration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare your OEM number to 84877919 \/ GM1068251\u003c\/li\u003e\n  \u003cli\u003eMatch bumper cutouts and screw locations with provided photos\u003c\/li\u003e\n  \u003cli\u003eIf unsure, reference your vehicle build sheet or ask your dealer for confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Wocch front license plate frame is aimed at GMC Sierra 1500 owners (2022–2026 non-Limited models) who need a like-for-like replacement bracket that matches factory mounting points, maintains a clean black aesthetic on the bumper, and offers long-lasting durability without complicated installation. It’s a practical option for drivers replacing a damaged OEM mount or adding a front plate to a compatible bumper.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this mount fit the 2022 GMC Sierra 1500 Limited?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This bracket fits 2022–2026 Sierra 1500 models but not the 2022 Sierra 1500 Limited.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes in the box with the Wocch license bracket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You receive one front license plate bracket and the mounting screws needed for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67587470229689,"sku":"B0FN3Z1CNK","price":94.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-plate-frame-front-view.jpg?v=1790509227"},{"product_id":"wocch-front-license-plate-frame-for-ford-super-duty-f-250-f-350-f-450-f-550-f-650-2020-2022-no-drill-black-abs-oem-replacement","title":"Wocch Front License Plate Frame for Ford Super Duty F-250 F-350 F-450 F-550 F-650 (2020-2022) - No-Drill Black ABS OEM Replacement","description":"\u003cp\u003e\u003cstrong\u003eWocch's front license plate frame is a direct-fit, no-drill replacement bracket for 2020–2022 Ford Super Duty trucks (F-250 through F-650) matching OEM part LC3Z-17A385-AB.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty ABS front bumper mounting bracket is engineered to replace the factory license plate holder on compatible Ford Super Duty models without modifying the bumper. It’s finished in black to resist fading and made to withstand high temperatures and daily road use. The bracket ships as a single piece and installs quickly, restoring a secure, OEM-style plate mount for trucks equipped with the listed engines and axle configurations.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my Ford Super Duty pickup or chassis cab?\u003c\/h3\u003e\n\u003cp\u003eIf you own a 2020, 2021, or 2022 Ford Super Duty in the F-250, F-350, F-450, F-550, or F-650 lineup, this Wocch bracket is built for those models. Compatibility depends on the vehicle configuration and engine options, so confirm your OEM part number before ordering. The listing covers pickup and chassis cab variants with single or dual rear wheels as noted.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: F-250, F-350, F-450, F-550, F-650 (2020–2022)\u003c\/li\u003e\n  \u003cli\u003eOEM part references: LC3Z-17A385-AB \/ LC3Z17A385AB \/ FO1068186\u003c\/li\u003e\n  \u003cli\u003eEngine\/drive notes: fits 6.7L diesel, 7.3L gas, 6.2L gas variants per configuration\u003c\/li\u003e\n  \u003cli\u003eCheck: pickup vs. chassis cab and single vs. dual rear wheel options\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation—do I need to drill or modify my bumper?\u003c\/h3\u003e\n\u003cp\u003eThis bracket is designed as a no-drill, bolt-on replacement to match the factory mounting points on compatible trucks. Installation typically requires only basic hand tools and follows the original mounting layout, so there’s no cutting or drilling needed. That keeps factory appearance and preserves the bumper structure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo drilling—uses the stock mounting holes\u003c\/li\u003e\n  \u003cli\u003eInstalls with standard hand tools in minutes\u003c\/li\u003e\n  \u003cli\u003eComes as one complete bracket—no extra hardware in the package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from this license plate holder?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is molded from high-quality ABS engineered for toughness and temperature resistance. Its black finish helps prevent fading during prolonged sun exposure and stands up to road debris and moisture. As a direct-fit OEM-style part, it’s intended for everyday use in demanding truck conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: heavy-duty ABS plastic\u003c\/li\u003e\n  \u003cli\u003eProperties: high-temperature resistance, fade-resistant finish\u003c\/li\u003e\n  \u003cli\u003eDesigned for long-term, daily on-road durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Owners of 2020–2022 Ford Super Duty trucks who need a reliable, OEM-compatible front license plate bracket—especially those replacing a damaged original, restoring a factory look, or installing a replacement without modifying the bumper. Before purchasing, verify your vehicle year, model, wheel configuration, and OEM part number (LC3Z-17A385-AB or equivalent) to ensure a correct fit. The package includes one Wocch front license plate bracket and is ideal for pickup and chassis cab configurations covered above.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bracket require drilling into the bumper?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it’s a no-drill, direct-fit replacement designed to use the factory mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Ford models and years does this fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits 2020–2022 Ford Super Duty F-250 through F-650; confirm OEM LC3Z-17A385-AB and your vehicle configuration.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67588055335097,"sku":"B0D2CVRL83","price":81.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-frame-front-view_d00d8174-56ac-4324-9433-909e6400c6a8.jpg?v=1790516276"},{"product_id":"wocch-front-license-plate-bracket-for-jeep-grand-cherokee-type-2-2017-2022-matte-black-abs-direct-fit-with-screws","title":"Wocch Front License Plate Bracket for Jeep Grand Cherokee Type 2 2017-2022 Matte Black ABS, Direct-Fit with Screws","description":"\u003cp\u003e\u003cstrong\u003eWocch front license plate bracket is a direct-fit ABS replacement mounting bracket designed to restore the front plate location on Jeep Grand Cherokee Type 2 models from 2017 through 2022.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis precision-molded front license plate holder is engineered to match the original mounting points on compatible Grand Cherokee trims, giving you a secure, low-profile place to attach your front tag again. Finished in matte black, the bracket resists heat and fading and comes with the required screws so you can swap it in quickly without modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my Jeep Grand Cherokee?\u003c\/h3\u003e\n\u003cp\u003eThe Wocch plate bracket is made to match factory dimensions for many Grand Cherokee Type 2 models. It fits model years 2017–2021 across Laredo, Limited (non-Limited X), Overland, Summit, and Trailhawk trims, specific 2021 submodels, and the 2022 Grand Cherokee WK Type 2.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2017, 2018, 2019, 2020, 2021, 2022 (WK Type 2)\u003c\/li\u003e\n  \u003cli\u003eCompatible trims: Laredo, Limited (without Limited X), Overland, Summit, Trailhawk, plus listed 2021 submodels\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part #68277137AA and parts link CH1068148\u003c\/li\u003e\n  \u003cli\u003eConfirm your vehicle’s model and OE number before purchase to ensure fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is this replacement bracket?\u003c\/h3\u003e\n\u003cp\u003eConstructed from high-quality ABS plastic, the bracket withstands typical road exposure without cracking or significant fading. The material offers temperature resistance suitable for exterior mounting and maintains a stable fit under normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality ABS for impact and temperature resilience\u003c\/li\u003e\n  \u003cli\u003eMatte black finish that resists visible fading\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain shape under everyday weather and road conditions\u003c\/li\u003e\n  \u003cli\u003eIncludes mounting screws to ensure a secure attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and designed to be a bolt-on replacement using existing mounting points—no cutting or drilling required for compatible vehicles. The bracket ships with the screws needed to reattach your license plate so you can complete the job with basic hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contents: 1 license plate bracket and mounting screws\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on swap using factory holes\u003c\/li\u003e\n  \u003cli\u003eFits original screw pattern to keep installation quick\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: screwdriver or socket set for screw removal and installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering to avoid a mismatch?\u003c\/h3\u003e\n\u003cp\u003eBecause Grand Cherokee configurations vary by model package and region, verify the part number and your vehicle’s submodel to ensure compatibility. Cross-check the OEM part number printed on your old bracket or on your vehicle documentation with the replacement part number.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare with OEM part #68277137AA or parts link CH1068148\u003c\/li\u003e\n  \u003cli\u003eVerify your vehicle is a Type 2 Grand Cherokee for the listed years and trims\u003c\/li\u003e\n  \u003cli\u003eMatch the mounting hole pattern to your current front bumper bracket\u003c\/li\u003e\n  \u003cli\u003eContact seller with vehicle VIN if you’re unsure about fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Wocch front license plate bracket is ideal for Grand Cherokee owners who need a factory-style replacement after damage, loss, or cosmetic wear. It suits DIY mechanics who want a quick, reliable installation with all mounting hardware included and drivers who prefer a low-profile, OEM-matching look for model years 2017–2022 Type 2 Grand Cherokees.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace OEM part #68277137AA?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, this Wocch bracket is made to replace OEM part #68277137AA and parts link CH1068148.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting screws included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the package includes the license plate bracket plus the mounting screws needed for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67588938694841,"sku":"B0DHKL1Y2B","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-bracket-on-bumper.jpg?v=1790528319"},{"product_id":"wocch-front-license-plate-bracket-for-gmc-sierra-1500-2016-2018-2019-limited-black-abs-direct-fit-with-hardware","title":"Wocch Front License Plate Bracket for GMC Sierra 1500 (2016-2018, 2019 Limited) — Black ABS, Direct-Fit with Hardware","description":"\u003cp\u003e\u003cstrong\u003eWocch’s front license plate bracket is a direct-fit replacement for GMC Sierra 1500 models 2016–2018 and the 2019 Sierra 1500 Limited, matching OEM part #23354525 (Partslink GM1068173).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty front bumper license plate mount from Wocch is designed to restore or replace the factory bracket with a durable ABS construction and a black finish that resists fading. It comes with the screws you need for a straightforward swap, and it’s engineered to align with the original mounting points so you don’t have to modify the bumper or plate.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my GMC Sierra 1500?\u003c\/h3\u003e\n\u003cp\u003eIf your truck is a GMC Sierra 1500 from model years 2016, 2017, 2018, or the 2019 Sierra 1500 Limited variant, this bracket is built to match the original attachment. Confirm compatibility by checking the OEM part number and the bumper’s mounting pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits GMC Sierra 1500: 2016, 2017, 2018\u003c\/li\u003e\n  \u003cli\u003eAlso fits 2019 GMC Sierra 1500 Limited\u003c\/li\u003e\n  \u003cli\u003eOEM reference: part #23354525, Partslink GM1068173\u003c\/li\u003e\n  \u003cli\u003eVerify vehicle year and bumper configuration before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the Wocch license plate bracket?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is molded from high-quality ABS plastic chosen for impact resistance and thermal stability. The black finish is formulated to resist UV fade and maintain a factory-like appearance under normal road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty ABS material for strength and flexibility\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature tolerance to avoid warping\u003c\/li\u003e\n  \u003cli\u003eFade-resistant black finish for long-lasting look\u003c\/li\u003e\n  \u003cli\u003eDesigned to meet OEM fit and alignment standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be simple: the bracket lines up with the original holes on the front bumper and uses the supplied fasteners. No cutting, drilling, or bumper modification should be required when matching the stated model years and OEM part number.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains 1 license plate bracket and mounting screws\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design for plug-and-play replacement\u003c\/li\u003e\n  \u003cli\u003eNo special tools typically required beyond a screwdriver or socket\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific instructions for torque and hardware placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I avoid ordering the wrong part?\u003c\/h3\u003e\n\u003cp\u003eBefore purchase, compare your truck’s year, bumper style, and the OEM part number to ensure compatibility. Visual comparison against photos of your current bracket helps prevent mismatches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck vehicle year and Sierra 1500 Limited vs. standard model\u003c\/li\u003e\n  \u003cli\u003eConfirm OEM part #23354525 (Partslink GM1068173) matches your current part\u003c\/li\u003e\n  \u003cli\u003eRefer to the product images for mounting hole locations and shape\u003c\/li\u003e\n  \u003cli\u003eContact us with vehicle details if you’re unsure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Wocch front license plate frame is ideal for GMC owners who need a reliable OEM-style replacement for a damaged, missing, or faded front bracket. It’s targeted at DIYers, service shops, and fleet managers who want a fast, correct-fit swap for Sierra 1500 trucks from 2016 through 2018 and the 2019 Sierra 1500 Limited.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bracket match OEM part number 23354525?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Wocch bracket corresponds to OEM part #23354525 (Partslink GM1068173).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are screws included for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains one bracket plus the mounting screws needed for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67590104809657,"sku":"B0DBZ14RN7","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-bracket-front-view.jpg?v=1790533659"},{"product_id":"wocch-front-license-plate-frame-for-ford-explorer-2020-2024-black-abs-oem-style-bracket-fits-base-xlt-limited","title":"Wocch Front License Plate Frame for Ford Explorer 2020-2024 — Black ABS OEM-Style Bracket (Fits Base, XLT, Limited)","description":"\u003cp\u003e\u003cstrong\u003eWocch's front license plate frame is an OEM-style mounting bracket designed to replace part LB5Z17A385AA on compatible 2020–2024 Ford Explorer models (excluding ST and Timberline).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ford Explorer needs a direct-fit replacement for the front bumper license plate holder, this Wocch bracket offers a durable ABS construction, hardware included, and the original fitment referenced by Partslink FO1068182. It’s intended to restore factory mounting points and maintain the clean, secure appearance of your Explorer’s front bumper while resisting heat and fading.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ford Explorer years and trims will this bracket fit?\u003c\/h3\u003e\n\u003cp\u003eThis Wocch bracket is engineered for specific Explorer model years and many trims; it does not fit ST or Timberline editions. Confirm year and trim before purchasing to ensure proper fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2020–2024 Explorer Base, Limited, Platinum, XLT\u003c\/li\u003e\n  \u003cli\u003eFits 2021–2024 King Ranch; 2020–2023 Limited Hybrid; 2021–2023 Platinum Hybrid\u003c\/li\u003e\n  \u003cli\u003eFits 2020–2023 Police Interceptor Utility Base versions\u003c\/li\u003e\n  \u003cli\u003eNot compatible with ST and Timberline variants — check OE number LB5Z17A385AA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part match the original equipment (OEM)?\u003c\/h3\u003e\n\u003cp\u003eThe bracket replicates the OEM shape and mounting pattern tied to part number LB5Z17A385AA and Partslink FO1068182, making it a practical replacement for worn or missing front plate mounts. Using the correct OE reference minimizes fitment surprises.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to match factory mounting points and screw locations\u003c\/li\u003e\n  \u003cli\u003ePart number: LB5Z17A385AA; Partslink: FO1068182\u003c\/li\u003e\n  \u003cli\u003eIncludes the bracket and necessary screws for installation\u003c\/li\u003e\n  \u003cli\u003eBlack finish to visually match many Explorer bumpers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat material and durability features should I expect?\u003c\/h3\u003e\n\u003cp\u003eManufactured from high-quality ABS plastic, this plate bracket balances strength and resistance to environmental stress. The material choice helps maintain appearance over time and withstands the temperatures and road conditions typical for front bumper components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty ABS construction for impact and weather resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature tolerance to reduce warping and fading\u003c\/li\u003e\n  \u003cli\u003eBlack finish resists visible discoloration on the bumper area\u003c\/li\u003e\n  \u003cli\u003ePre-drilled mounting points for secure attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone familiar with front bumper or license plate hardware: the package includes one bracket and screws, and the bracket aligns with factory holes so no trimming or drilling is typically required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains: 1 license plate bracket and mounting screws\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on replacement using existing bumper fasteners\u003c\/li\u003e\n  \u003cli\u003eRecommended to verify model year and OE number before install\u003c\/li\u003e\n  \u003cli\u003eInstallation tools: basic hand tools (screwdriver\/socket set) are usually sufficient\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a 2020–2024 Ford Explorer (excluding ST and Timberline) and need a reliable front license plate mounting bracket that follows OEM specifications LB5Z17A385AA \/ FO1068182, this Wocch replacement is built for you. It’s suitable for owners restoring a factory look, replacing damaged mounts after minor impacts, or preparing a vehicle for sale. Before ordering, verify your Explorer’s trim and model year and compare the OE number shown in your existing bracket to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit the Ford Explorer ST or Timberline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This bracket excludes ST and Timberline models—check your Explorer trim and OE number LB5Z17A385AA.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hardware is included with the bracket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes one front license plate bracket and the required mounting screws for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67590255083705,"sku":"B0DCZMPTX2","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-bracket-front-view_6931e528-4c5c-4f18-bd10-d85a4c44ec21.jpg?v=1790534121"},{"product_id":"wocch-front-license-plate-frame-for-chevy-equinox-2018-2021-black-abs-replacement-bracket-with-hardware","title":"Wocch Front License Plate Frame for Chevy Equinox 2018-2021 — Black ABS Replacement Bracket with Hardware","description":"\u003cb\u003eWocch's Front License Plate Frame is a direct-fit replacement bracket designed to mount the front license plate on Chevy Equinox models from 2018 through 2021.\u003c\/b\u003e\n\n\u003cp\u003eThis front bumper license plate holder is made to match the original equipment mounting points and restore the factory appearance after plate removal or damage. Constructed from impact-resistant ABS plastic with a black finish, the bracket resists fading and high temperatures while providing the correct alignment for your vehicle's front plate. The package includes one bracket and the fasteners needed for installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my 2018–2021 Chevy Equinox?\u003c\/h3\u003e\n\u003cp\u003eYes—the Wocch bracket is manufactured to match the OEM part number and fits Equinox models from 2018 to 2021. Before ordering, verify your vehicle year and the OE reference to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Chevrolet Equinox 2018, 2019, 2020, 2021\u003c\/li\u003e\n  \u003cli\u003eOEM part number reference: 23320630; Partslink: GM1068190\u003c\/li\u003e\n  \u003cli\u003eVerify your bumper mounting points and year before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is the installation process?\u003c\/h3\u003e\n\u003cp\u003eInstallation is simple and intended for DIY fitting using the included screws. The bracket aligns with factory holes and secures to the bumper without trimming or special tools in most cases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 1x bracket and mounting screws\u003c\/li\u003e\n  \u003cli\u003eFits into existing factory mounting points for a clean install\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools (screwdriver, socket) typically required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is this bracket made of and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eThe Wocch license plate holder is molded from heavy-duty ABS plastic chosen for impact resistance and temperature tolerance. The black finish helps prevent visible fading and keeps the front bumper looking factory-correct over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality ABS construction for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant and UV-stable finish to reduce fading\u003c\/li\u003e\n  \u003cli\u003eManufactured to match OEM fit and finish standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what should I check before buying?\u003c\/h3\u003e\n\u003cp\u003eYou receive a single front license plate bracket and the screws needed for mounting. Prior to purchase, compare the part number and image with your vehicle’s existing bracket or mounting area to avoid ordering the wrong piece.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes: 1x Wocch front license plate bracket and mounting screws\u003c\/li\u003e\n  \u003cli\u003eInspect your current bracket and verify OE number 23320630 (GM1068190)\u003c\/li\u003e\n  \u003cli\u003eContact seller if unsure about compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This product suits Chevy Equinox owners (2018–2021) needing a direct-replacement front license plate bracket—whether restoring factory appearance after removal, replacing a broken mount, or preparing the vehicle for states that require a front plate. It’s aimed at DIY car owners, mechanics, and body shops seeking an OEM-style bracket with straightforward installation and durable ABS construction.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bracket replace OEM part 23320630?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Wocch bracket is made to match OEM part number 23320630 (Partslink GM1068190) for Equinox 2018–2021.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting screws included with the bracket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains one bracket and the screws required for typical installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67590710755513,"sku":"B0D2HMY13T","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-frame-front-view_8c9d9919-747c-4603-bb5c-b1275a2831c7.jpg?v=1790536353"},{"product_id":"wocch-front-license-plate-bracket-for-gmc-yukon-yukon-xl-2015-2020-oem-fit-abs-includes-hardware","title":"Wocch Front License Plate Bracket for GMC Yukon\/Yukon XL 2015-2020 — OEM Fit ABS, Includes Hardware","description":"\u003cb\u003eWocch's front license plate bracket is a direct-fit replacement for GMC Yukon and Yukon XL models (2015–2020), matching part #22948151\/GM1068159 for a secure, factory-style mount.\u003c\/b\u003e\n\n\u003cp\u003eThis replacement front bumper license plate holder is designed to restore the original mounting point on GMC Yukon and Yukon XL vehicles from 2015 through 2020. Molded from high-quality ABS, the bracket resists heat and fading while delivering the same fit and finish you expect from an OEM-style component. The kit ships with the bracket and necessary fasteners so you can swap the broken or missing piece quickly and get back on the road.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this bracket fit my GMC Yukon or Yukon XL?\u003c\/h3\u003e\n\u003cp\u003eThe Wocch bracket is manufactured to the dimensions and mounting points used by GMC for the 2015–2020 Yukon and Yukon XL family, including Denali trims. It is intended as a direct replacement for the original part number 22948151 (GM1068159), so alignment with factory holes and contours is preserved.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2015, 2016, 2017, 2018, 2019, 2020\u003c\/li\u003e\n  \u003cli\u003eModels supported: Yukon, Yukon XL, and Denali trims\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part #22948151 \/ GM1068159\u003c\/li\u003e\n  \u003cli\u003ePre-shaped to match bumper profile for straightforward mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eThis license plate mount is molded from heavy-duty ABS plastic chosen for impact resistance and color retention. The material tolerates normal under-bumper heat and weather exposure, helping avoid the cracks and fading that plague cheaper brackets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-grade ABS construction for toughness and longevity\u003c\/li\u003e\n  \u003cli\u003eResistant to temperature changes and UV fading\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand road debris and typical wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be user-friendly: the bracket lines up with factory holes and secures with included fastener screws. Basic hand tools are sufficient, and the package supplies the mounting bracket plus the screws needed for a complete replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contents: 1 license plate bracket and mounting screws\u003c\/li\u003e\n  \u003cli\u003eNo special tools required—common hand tools suffice\u003c\/li\u003e\n  \u003cli\u003eMounting follows original bumper attachment points for quick swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen should I choose this part over other options?\u003c\/h3\u003e\n\u003cp\u003eChoose this Wocch bracket when the existing front license plate mount on your Yukon is cracked, missing, or warped and you want a like-for-like replacement without modifying the bumper. It’s ideal for owners who want OEM-style fit and finish at an aftermarket price.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBest when replacing damaged or fading original brackets\u003c\/li\u003e\n  \u003cli\u003eAvoids drilling or altering bumper components\u003c\/li\u003e\n  \u003cli\u003eConvenient for DIY repairs or quick shop installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement bracket suits GMC Yukon and Yukon XL owners (2015–2020) who need a reliable, factory-accurate front license plate mount. It’s targeted at DIYers, body shops, and anyone seeking a durable ABS replacement that restores original alignment and looks without extensive labor or modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this bracket compatible with GMC Yukon Denali 2017?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Wocch bracket fits GMC Yukon and Yukon XL models, including Denali trims from 2015 through 2020.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes the front license plate bracket plus the necessary screws for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67590735134905,"sku":"B0DBYTVWWS","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-plate-frame-front-view_02857316-aba8-49b4-95d3-d1808b1954ec.jpg?v=1790537042"},{"product_id":"wocch-front-license-plate-frame-for-toyota-4runner-2014-2024-black-abs-oem-replacement-bracket-direct-fit","title":"Wocch Front License Plate Frame for Toyota 4Runner 2014-2024 — Black ABS OEM Replacement Bracket, Direct Fit","description":"\u003cp\u003e\u003cstrong\u003eWocch Front License Plate Frame is a direct-replacement front bumper bracket engineered to securely mount a license plate to Toyota 4Runner models from 2014 through 2024 (not compatible with Limited trim).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement front license plate bracket arrives ready to install with the required screws and matches the original equipment part number 5211435040 (Partslink TO1068130). Molded from high-quality ABS plastic with heat- and fade-resistant properties, the bracket restores a factory appearance and reliable fit without body modification. Review fitment notes before ordering to ensure compatibility with your 4Runner year and trim.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my Toyota 4Runner model year and trim?\u003c\/h3\u003e\n\u003cp\u003eThe Wocch plate frame fits Toyota 4Runner years 2014 through 2024 except the Limited trim. Before purchasing, verify your vehicle’s year and that it isn’t the Limited version to avoid mismatch. The listing corresponds to OEM part number 5211435040 and Partslink code TO1068130.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2014–2024 Toyota 4Runner (non-Limited).\u003c\/li\u003e\n  \u003cli\u003eOEM reference: 5211435040; Partslink: TO1068130.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Toyota 4Runner Limited trim—confirm before ordering.\u003c\/li\u003e\n  \u003cli\u003eCheck photos and vehicle documents to confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is the Wocch license plate holder?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is constructed from heavy-duty ABS plastic designed for long-term exposure to road conditions. Its material resists high temperatures and helps prevent fading and brittleness that can occur with cheaper alternatives. This yields a consistent look and functional mounting point for your plate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade from high-grade ABS for impact and heat resistance.\u003c\/li\u003e\n  \u003cli\u003eFade-resistant finish preserves appearance over time.\u003c\/li\u003e\n  \u003cli\u003eDurable under typical road and weather exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and intended to be a direct bolt-on replacement for the original bumper bracket. The package includes one front license plate bracket and the screws needed to fasten it. Basic hand tools are generally sufficient, and no cutting or drilling is required when replacing the OEM part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains: 1 license plate bracket and mounting screws.\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement design for simple bolt-on installation.\u003c\/li\u003e\n  \u003cli\u003eNo modifications required when replacing the original bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this bracket match the factory look of my 4Runner?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is finished in black to blend with the factory bumper styling common on 4Runners. Its shape and mounting points are made to align with the vehicle’s original locations so that the plate sits flush and looks like an OEM-installed component. It’s a practical way to restore or replace a damaged bracket without altering vehicle appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack finish matches factory bumper aesthetics.\u003c\/li\u003e\n  \u003cli\u003eOEM-style fit keeps license plate flush with bumper face.\u003c\/li\u003e\n  \u003cli\u003eIdeal when replacing cracked or missing original bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Wocch Front License Plate Frame is intended for Toyota 4Runner owners (2014–2024 non-Limited) who need a direct-replacement license plate bracket that restores factory fit and appearance. It suits DIYers replacing a broken or missing bracket, fleet operators maintaining vehicle presentation, and anyone seeking an OEM-matching mounting solution backed by durable ABS construction. Always confirm your vehicle’s year and trim and compare the OEM part number 5211435040 (TO1068130) with your existing bracket before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bracket fit Toyota 4Runner Limited?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Wocch bracket does not fit the 4Runner Limited trim. It fits other 2014–2024 4Runner models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are screws included for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes the front license plate bracket plus the mounting screws needed for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67590737756345,"sku":"B0D2HT1L7C","price":77.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-bracket-front-view.jpg?v=1790537090"},{"product_id":"wocch-front-license-plate-frame-for-ford-f-150-2021-2023-3-3l-5-0l-matte-black-no-drill-oem-fit-abs","title":"Wocch Front License Plate Frame for Ford F-150 (2021-2023, 3.3L\/5.0L) Matte Black No-Drill OEM Fit ABS","description":"\u003cp\u003e\u003cstrong\u003eWocch's front license plate frame is a direct, no-drill replacement bracket engineered to fit 2021–2023 Ford F-150 3.3L and 5.0L models using OEM part ML3Z-17A385-AB.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your F-150 is missing the front license mounting bracket or the original piece has cracked, warped, or faded, this Wocch bracket offers an exact-fit alternative. Made from high-temp resistant ABS, it mirrors the vehicle's factory mounting points so you can restore the front bumper appearance and secure your plate without modifying the bumper or drilling new holes.\u003c\/p\u003e\n\n\u003ch3\u003eHow simple is installation for the Wocch front bumper license bracket?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be straightforward: this piece is a direct replacement that clips and screws into the factory mounting locations. No special tools or bumper alterations are required for properly equipped trucks, so most owners can fit it themselves in minutes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for OE ML3Z-17A385-AB mounting points\u003c\/li\u003e\n  \u003cli\u003eIncludes bracket and screws for a complete swap\u003c\/li\u003e\n  \u003cli\u003eClip-on style with screw retention—no drilling needed\u003c\/li\u003e\n  \u003cli\u003eFits the bumper contours for clean, factory-like alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this bracket match my F-150 visually and dimensionally?\u003c\/h3\u003e\n\u003cp\u003eThe Wocch bracket is color-matched in matte black and built to the original equipment shape so it blends into the bumper line. It was manufactured to the same mounting pattern as the OE part number listed, minimizing gaps and keeping the plate centered and even with the bumper face.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatte black finish resists visible fading and blends with factory trim\u003c\/li\u003e\n  \u003cli\u003eOEM-style contouring for a flush appearance\u003c\/li\u003e\n  \u003cli\u003eMeasured to match the original part for proper plate placement\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature ABS maintains shape in varied climates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this part fit my vehicle—which years and engines are covered?\u003c\/h3\u003e\n\u003cp\u003eThis bracket fits 2021, 2022, and 2023 Ford F-150 models equipped with 3.3L or 5.0L engines that use the listed OE part numbers. Confirm your vehicle’s year and factory part reference before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2021, 2022, 2023\u003c\/li\u003e\n  \u003cli\u003eEngine fitment: 3.3L and 5.0L F-150 variants\u003c\/li\u003e\n  \u003cli\u003eOE references: ML3Z-17A385-AB, ML3Z17A385AB (Partslink# FO1068185)\u003c\/li\u003e\n  \u003cli\u003eCheck images and OE number to avoid ordering the wrong bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from this replacement?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is molded from durable ABS engineered to withstand heat and resist fading over time. It’s intended for exterior use and tested to retain its shape and mounting integrity under normal road and weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality ABS construction for heat and UV resistance\u003c\/li\u003e\n  \u003cli\u003eColor-stable matte black finish reduces visible weathering\u003c\/li\u003e\n  \u003cli\u003eScrew-in and clip features keep the plate securely mounted\u003c\/li\u003e\n  \u003cli\u003eFactory-style strength for everyday driving conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Wocch front license plate bracket is intended for Ford F-150 owners (2021–2023, 3.3L or 5.0L) who need an exact-fit replacement for a missing or damaged OEM bracket. It’s a practical choice for DIY installers, body shops doing minor bumper touch-ups, and anyone seeking a no-drill, factory-looking mounting solution that restores proper plate placement.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bracket require drilling the bumper?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The Wocch bracket is a no-drill direct replacement that clips and screws into the factory mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Ford F-150 years and engines does it fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 2021–2023 Ford F-150 models with 3.3L or 5.0L engines using OE part ML3Z-17A385-AB.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67590881083577,"sku":"B0DCHZZ341","price":78.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-bracket-front-view_3fca28eb-0b17-4ad8-97a8-83b45fb2b780.jpg?v=1790538809"},{"product_id":"wocch-front-license-plate-bracket-for-chevy-silverado-1500-2019-2022-oem-fit-abs-mount-with-screws","title":"Wocch Front License Plate Bracket for Chevy Silverado 1500 (2019–2022) - OEM Fit ABS Mount with Screws","description":"\u003cp\u003e\u003cb\u003eWocch’s front bumper license plate bracket is a direct-fit replacement for Chevy Silverado 1500 (2019–2022) models, providing an OEM-style mount with included screws for quick installation.\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement front license plate holder is built to the original equipment specifications (part number 84428905 \/ GM1068200) to restore the factory mounting point on Silverado 1500 trucks from 2019 through 2022, including 2022 LTD variants. Molded from heavy-duty ABS, the bracket resists heat and fading so it maintains a clean, factory look while holding your license plate securely. The kit ships complete with the bracket and the screws you need, making it a straightforward swap for owners who want a true-fit OEM solution without extra modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my Chevy Silverado 1500?\u003c\/h3\u003e\n\u003cp\u003eYes, this Wocch bracket is engineered to match the original mounting geometry for Silverado 1500 model years 2019, 2020, 2021 and 2022 (including 2022 LTD). Always verify your truck’s year and compare the OEM part numbers to ensure compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2019, 2020, 2021, 2022 (LTD included)\u003c\/li\u003e\n  \u003cli\u003eOEM part reference: 84428905\u003c\/li\u003e\n  \u003cli\u003ePartslink \/ manufacturer reference: GM1068200\u003c\/li\u003e\n  \u003cli\u003eCheck photos and existing bracket before purchase to avoid fitment issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is this replacement mount?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is injection-molded from high-quality ABS plastic formulated for automotive use, giving it resistance to heat, sun exposure, and road debris. The material is designed to keep its shape and color over time so the mounting location looks factory-correct season after season.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-duty ABS construction resists warping and fading\u003c\/li\u003e\n  \u003cli\u003eOEM-style thickness and structural ribs for secure plate support\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand typical road and weather conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is a simple replacement of the existing front license plate mount—no drilling or additional parts should be necessary when matching an OEM setup. Wocch supplies the bracket and the mounting screws, so you can reinstall the plate using the same attachment points as the factory part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contents: one bracket and mounting screws\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design for bolt-on swap with factory mounting points\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: basic screwdriver or socket set for screw removal and installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering to avoid a return?\u003c\/h3\u003e\n\u003cp\u003eConfirm your Silverado’s model year and verify that the part numbers match what’s currently on your truck. Inspect the front bumper area to ensure the existing mounting geometry matches the photos and measurements of this replacement bracket.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare part number 84428905 \/ GM1068200 to your original part\u003c\/li\u003e\n  \u003cli\u003eConfirm vehicle years: 2019–2022, including LTD\u003c\/li\u003e\n  \u003cli\u003eReview product images and your bumper’s mounting holes before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Wocch front license plate bracket is intended for Chevy Silverado 1500 owners (2019–2022) who need a reliable, OEM-style replacement—whether restoring a damaged mount, replacing a missing bracket after a repair, or preparing the truck for local front-plate laws. It suits DIYers and professional technicians who prefer direct-fit parts that match factory specifications and include the necessary mounting hardware for a quick reinstall.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bracket include the mounting screws?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains the front license plate bracket and the mounting screws needed for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2022 Silverado LTD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Wocch bracket is compatible with 2019–2022 Silverado 1500 models, including the 2022 LTD version.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67591455768761,"sku":"B0D6323YKX","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-bracket-front-view_2f5d0ca1-e0fb-4c9b-abb9-02573e0f2b8f.jpg?v=1790551766"},{"product_id":"wocch-front-license-plate-frame-for-chevy-silverado-1500-2016-2018-2019-ld-black-abs-with-mounting-screws","title":"Wocch Front License Plate Frame for Chevy Silverado 1500 (2016-2018, 2019 LD) Black ABS with Mounting Screws","description":"\u003cp\u003e\u003cstrong\u003eReplacement front bumper license plate bracket engineered to fit 2016–2018 Chevy Silverado 1500 and 2019 Silverado 1500 LD models (not compatible with 2019 new body style).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Wocch front license plate frame is a direct-fit mounting bracket designed to replace worn or missing factory hardware on select Chevrolet Silverado 1500 trucks. Molded from high-strength ABS in black, the bracket reproduces the OEM mounting points and includes mounting screws so you can reinstall your front plate quickly. The part is listed as OEM-compatible with part number 23354526 (Partslink GM1068172) and is intended for owners who need a durable, no-frills replacement for the front bumper mount.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my Silverado 1500?\u003c\/h3\u003e\n\u003cp\u003eThe bracket fits 2016, 2017, and 2018 Chevrolet Silverado 1500 trucks and the 2019 Silverado 1500 LD. It is not designed for the 2019 Silverado with the revised body style, so checking your year and body variant is important before ordering. Confirm the OEM reference 23354526 or GM1068172 when cross-referencing parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2016, 2017, 2018 Silverado 1500\u003c\/li\u003e\n  \u003cli\u003eAlso fits: 2019 Silverado 1500 LD (not new body style)\u003c\/li\u003e\n  \u003cli\u003eOEM reference: 23354526 \/ Partslink GM1068172\u003c\/li\u003e\n  \u003cli\u003eVerify your truck’s year and body type before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and intended to be a simple bolt-on replacement using existing mounting points. The package comes with the license plate bracket and the screws needed to attach it; no specialty tools or body modifications are required for most installations. Typical installation time is under 30 minutes for someone comfortable with basic hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 1 license plate bracket and mounting screws\u003c\/li\u003e\n  \u003cli\u003eInstallation: bolt-on using factory mounting points\u003c\/li\u003e\n  \u003cli\u003eTools: common hand tools typically sufficient\u003c\/li\u003e\n  \u003cli\u003eEstimated time: under 30 minutes for most users\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the bracket made of and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eThe Wocch bracket is manufactured from heavy-duty ABS plastic that resists impact and high temperatures. The black finish helps prevent visible fading and matches factory bumper aesthetics. While not metal, the ABS construction balances toughness and flexibility to withstand typical road conditions and the stresses of mounting a front plate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-strength ABS plastic\u003c\/li\u003e\n  \u003cli\u003eProperties: high-temperature resistance and fade resistance\u003c\/li\u003e\n  \u003cli\u003eFinish: black to match factory bumpers\u003c\/li\u003e\n  \u003cli\u003eDesign: engineered to align with OEM mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: This Wocch front license plate bracket is for Silverado owners who need a reliable, OEM-style replacement for a missing, broken, or faded front plate mount. It's ideal for do-it-yourself installers, body shops performing a quick repair, and anyone replacing a bracket after minor bumper damage. Be sure to confirm your truck’s model year and body style (2016–2018 Silverado 1500 or 2019 Silverado 1500 LD) and the OEM part number 23354526\/GM1068172 to ensure compatibility before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bracket fit the 2019 Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for the 2019 Silverado 1500 LD (not the 2019 new body style). Confirm your vehicle variant before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting screws included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the bracket ships with the screws needed for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67591465173177,"sku":"B0D2DFRSN9","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-plate-frame-front-view_e4989f88-68d9-41a7-bcff-49d81a5e7725.jpg?v=1790552138"},{"product_id":"wocch-front-license-plate-frame-for-gmc-sierra-1500-2019-2022-matte-black-abs-oem-fit-includes-screws","title":"Wocch Front License Plate Frame for GMC Sierra 1500 (2019-2022) Matte Black ABS OEM Fit, Includes Screws","description":"\u003cstrong\u003eWocch's front license plate frame is a direct-fit replacement bracket for GMC Sierra 1500 models from 2019 through 2022, built from durable ABS and supplied with mounting screws.\u003c\/strong\u003e\n\n\u003cp\u003eIf the factory front plate bracket on your Sierra is cracked, missing, or faded, this Wocch replacement restores a clean, factory-style mount without drilling or modification. Designed to match the original equipment part number 84428907 (Partslink GM1068198), the bracket is molded from high-temperature resistant ABS and finished in matte black to blend with front bumpers across trim levels.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Sierra years and trims does this bracket fit?\u003c\/h3\u003e\n\u003cp\u003eThis bracket was made for a range of GMC Sierra 1500 model years and submodels. Confirming fit before ordering avoids returns and ensures a seamless installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits GMC Sierra 1500: 2019, 2020, 2021 (Base, Elevation, SLE).\u003c\/li\u003e\n  \u003cli\u003eFits 2022 Sierra 1500: Pro Crew Cab, Pro Extended Cab, Limited Elevation, Limited Pro Crew\/Extended Cab, Limited SLE.\u003c\/li\u003e\n  \u003cli\u003eOEM compatibility: part number 84428907 (Partslink: GM1068198).\u003c\/li\u003e\n  \u003cli\u003eAlways check your vehicle’s year, submodel, and existing OE number against product images before purchasing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and weather-resistant is the Wocch plate bracket?\u003c\/h3\u003e\n\u003cp\u003eWocch manufactures the bracket from heavy-duty ABS plastic engineered for automotive use. The material resists heat, UV exposure, and typical road debris to keep the bracket functional and visually consistent over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature resistant ABS reduces warping in hot environments.\u003c\/li\u003e\n  \u003cli\u003eBlack finish prevents rapid fading and maintains a factory look.\u003c\/li\u003e\n  \u003cli\u003eRugged construction stands up to road impacts and vibrations.\u003c\/li\u003e\n  \u003cli\u003eDesigned to mirror the OEM bracket’s mounting points and strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what’s included in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic hand tools. The bracket comes ready to mount using existing bumper holes or the same attachment points used by the original bracket.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains: 1 front license plate bracket and the mounting screws.\u003c\/li\u003e\n  \u003cli\u003eNo bumper modification or special drilling required when used on compatible models.\u003c\/li\u003e\n  \u003cli\u003eTypical install time: 10–20 minutes with a screwdriver or socket set.\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific OE locations and torque lightly to avoid cracking plastic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose an OEM-style replacement instead of a universal frame?\u003c\/h3\u003e\n\u003cp\u003eOEM-style brackets preserve bumper appearance and attach at factory points, avoiding misalignment and trim damage. For vehicles that need to pass inspections or maintain a stock look, this bracket is a near-identical match to the original part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact fitment reduces rattles and maintains bumper contour.\u003c\/li\u003e\n  \u003cli\u003eOEM part number match (84428907 \/ GM1068198) simplifies selection.\u003c\/li\u003e\n  \u003cli\u003eMatte black finish integrates with factory bumpers and trims.\u003c\/li\u003e\n  \u003cli\u003ePreventative replacement helps avoid fines or failed inspections when a front mount is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you own a GMC Sierra 1500 from the specified years or one of the listed 2022 submodels and need a reliable, OEM-style front license plate bracket, the Wocch replacement is crafted for you. It’s ideal for owners replacing a damaged factory bracket, restoring a used truck to stock condition, or securing a front plate without altering the bumper. Before ordering, double-check your vehicle year, submodel, and OE number to ensure a perfect match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bracket fit my 2022 Sierra 1500 Limited?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits 2022 Sierra 1500 Limited trims including Elevation, Pro Crew\/Extended Cab, and SLE when OE number matches 84428907.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are screws included and is drilling required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Screws are included; no drilling is needed when installed on compatible models using factory mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67591477199033,"sku":"B0D2HLFWPD","price":69.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-frame-gmc-sierra-front-view.jpg?v=1790552587"},{"product_id":"wocch-front-license-plate-bracket-for-ram-1500-2013-2018-2019-2024-classic-2-piece-plastic-bumper-abs-direct-fit","title":"Wocch Front License Plate Bracket for Ram 1500 2013–2018 \u0026 2019–2024 Classic — 2‑Piece Plastic Bumper, ABS Direct‑Fit","description":"\u003cp\u003e\u003cstrong\u003eWocch front license plate bracket is a direct-fit replacement mounting kit designed to hold a front plate on Ram 1500 trucks that have the two-piece plastic front bumper (fits select 2013–2018 and 2019–2024 Classic models).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ram has a two-piece plastic front bumper and you need a reliable holder for the front license plate, this Wocch bracket is built to match factory fit and appearance while resisting heat and fading. It ships with the mounting screws and is molded from heavy-duty ABS to withstand road exposure. Before ordering, verify your truck’s exact model, bumper type, and the OEM part number to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ram years and submodels are compatible with this bracket?\u003c\/h3\u003e\n\u003cp\u003eThis bracket fits Ram 1500 trucks equipped with a two-piece plastic front bumper and the Ram logo on the grille. It covers 2013–2018 Ram 1500 models (including Express and Sport submodels with the Type 2 bumper) and 2019–2024 Ram 1500 Classic (DS) models that share the same two-piece plastic bumper design.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2013–2018 Ram 1500: Express, Sport with Type 2 plastic bumper\u003c\/li\u003e\n  \u003cli\u003e2019–2024 Ram 1500 Classic (DS): Express, SLT, Tradesman, Warlock, Special Service where specified\u003c\/li\u003e\n  \u003cli\u003eNot compatible with steel bumpers, TRX, or Rebel models\u003c\/li\u003e\n  \u003cli\u003eConfirm bumper type and grille logo before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and intended to be a direct replacement for the original bracket on compatible plastic bumpers. The package includes the bracket and the required screws, so no additional hardware is usually needed. Basic hand tools are sufficient and the bracket aligns with factory mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with 1 bracket and mounting screws\u003c\/li\u003e\n  \u003cli\u003eUses factory bolt locations for a snug fit\u003c\/li\u003e\n  \u003cli\u003eNo drilling required when matched to the correct bumper type\u003c\/li\u003e\n  \u003cli\u003eSimple removal of the old bracket and swap-in install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat material is the bracket and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eThe Wocch bracket is molded from high-quality ABS plastic engineered for automotive exterior use. ABS offers impact resistance, temperature tolerance, and color stability so the bracket maintains its look through road debris, sunlight, and typical weather exposure. Routine inspections are recommended after heavy off-road use or collisions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade from heavy-duty ABS for strength and heat resistance\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist fading in sunlight\u003c\/li\u003e\n  \u003cli\u003eMeant for everyday road conditions and urban driving\u003c\/li\u003e\n  \u003cli\u003eReplaceable and inexpensive compared with bumper repair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm I have the right part before ordering?\u003c\/h3\u003e\n\u003cp\u003eDouble-check your truck’s year, submodel, and whether the front bumper is plastic and two-piece Type 2. Look for the Ram logo on the grille as indicated in compatibility notes and compare the OEM part number to 68141642AA if available. If you aren’t sure, consult your vehicle’s parts diagram or a dealer to avoid ordering the wrong bracket.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify bumper material: plastic (two-piece) only\u003c\/li\u003e\n  \u003cli\u003eCompare OEM\/parts numbers when possible: 68141642AA\u003c\/li\u003e\n  \u003cli\u003eNot for TRX, Rebel, or steel bumper variants\u003c\/li\u003e\n  \u003cli\u003eContact seller with vehicle VIN for confirmation if uncertain\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Wocch front license plate bracket is intended for Ram owners who need a like-for-like replacement on trucks with the two-piece plastic front bumper—especially Express, Sport, and Classic (DS) submodels listed above. It’s a practical choice for drivers seeking a clean, OEM-style mounting point without modifying the bumper or drilling new holes. If your Ram uses a steel bumper, TRX, or Rebel configuration, this part will not fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit a steel front bumper?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This bracket is made for two-piece plastic front bumpers only and will not fit steel bumpers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include mounting screws?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes the license plate bracket plus the necessary screws for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67591725711545,"sku":"B0D6RH8X5T","price":62.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-bracket-front-view_7afa6a5c-8ed5-4400-ab03-6f5b137aac14.jpg?v=1790558310"},{"product_id":"wocch-front-license-plate-frame-for-ford-f-150-2009-2014-matte-black-no-drill-abs-bracket","title":"Wocch Front License Plate Frame for Ford F-150 2009-2014 - Matte Black No-Drill ABS Bracket","description":"\u003cp\u003e\u003cstrong\u003eWocch's front license plate frame is a direct-fit, no-drill replacement bracket for Ford F-150 (2009–2014) light-duty models that restores a secure mounting point without altering the bumper.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ford F-150 is missing the factory front plate bracket or the original part has cracked, this Wocch replacement mounts in the same location and follows the OE fit pattern. Made from high-temperature resistant ABS, the bracket resists fading and everyday road wear while matching the factory mounting points for a straightforward swap. This product is designed specifically for light-duty F-150 models from 2009 through 2014 — it is not compatible with Super Duty, Harley-Davidson, SVT or EcoBoost variants unless otherwise stated.\u003c\/p\u003e\n\n\u003ch3\u003eWill this bracket fit my F-150 model year and trim?\u003c\/h3\u003e\n\u003cp\u003eConfirming fit is essential because several F-150 trims use different bumper designs. This Wocch bracket fits 2009–2014 light-duty Ford F-150 trucks. It replaces OE part numbers 9L3Z-17A385-A \/ 9L3Z17A385A (Partslink FO1068134).\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible model years: 2009, 2010, 2011, 2012, 2013, 2014 (light-duty).\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Super Duty, Harley-Davidson, SVT or EcoBoost trims.\u003c\/li\u003e\n  \u003cli\u003e2014 vehicles may require removal of the bumper center piece for installation.\u003c\/li\u003e\n  \u003cli\u003eAlways compare your existing part to the product photos and OE number before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation — do I need to drill or modify my bumper?\u003c\/h3\u003e\n\u003cp\u003eThis bracket is designed as a direct replacement so no drilling or bumper modification is required for compatible vehicles. It uses the factory mounting points and hardware location, making it a quick repair that can be completed with basic hand tools. The result is a secure mount that looks like the original equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo-drill installation for matching light-duty F-150 bumpers.\u003c\/li\u003e\n  \u003cli\u003eFits into existing OEM mounting locations; uses standard fasteners.\u003c\/li\u003e\n  \u003cli\u003eBasic tools (screwdriver\/socket) typically sufficient.\u003c\/li\u003e\n  \u003cli\u003eCheck 2014 bumpers for the removable center section before mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the bracket made of and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eWocch manufactures this plate frame from high-quality ABS plastic engineered for automotive use. ABS offers good impact resistance and holds up to heat and UV exposure better than cheaper alternatives, reducing the chance of cracking or color fade. Proper installation and normal vehicle maintenance will extend the bracket’s service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: high-temperature resistant ABS plastic.\u003c\/li\u003e\n  \u003cli\u003eFinish: matte black to blend with front bumper trim.\u003c\/li\u003e\n  \u003cli\u003eResists fading and common road wear when installed correctly.\u003c\/li\u003e\n  \u003cli\u003eSold as one bracket per package; hardware not included unless specified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Wocch front license plate bracket is intended for Ford F-150 owners (2009–2014 light-duty models) who need a like-for-like replacement for a missing or damaged front plate mount. It’s ideal for DIYers and professional installers who want an OE-style fit without drilling or customizing the bumper. Before buying, verify your truck’s year, trim, and existing part number to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is drilling required to install this F-150 license bracket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No drilling is required for compatible light-duty 2009–2014 F-150 bumpers; it uses existing factory mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this bracket fit Super Duty or EcoBoost F-150 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This bracket is for light-duty 2009–2014 F-150s only and does not fit Super Duty, SVT, Harley-Davidson, or EcoBoost trims.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67592526168249,"sku":"B0D7GZCSMM","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-f150-front-bracket-front-view.jpg?v=1790565168"},{"product_id":"wocch-front-license-plate-bracket-for-ram-2500-3500-4500-5500-2019-2025-black-abs-oe-fit","title":"Wocch Front License Plate Bracket for Ram 2500\/3500\/4500\/5500 (2019–2025) — Black ABS, OE Fit","description":"\u003cp\u003e\u003cstrong\u003eWocch front license plate bracket is a direct-fit replacement mount for Ram 2500\/3500\/4500\/5500 trucks (2019–2025) that restores a factory-style plate holder and hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis black ABS license plate frame from Wocch is designed to match the original bumper opening on select Ram heavy-duty trucks, letting you replace damaged or missing front-mount hardware quickly. Molded to OE dimensions and supplied with fastening screws, the part fits many trims including Big Horn, Laramie, Limited, Tradesman, Lone Star, Longhorn and Power Wagon models across model years 2019–2025. Built to resist heat and fading, it aims to deliver a durable, low-profile mounting solution that looks factory-installed.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ram models and years will this bracket fit?\u003c\/h3\u003e\n\u003cp\u003eThis bracket covers a wide range of Ram heavy-duty pickups. Check your truck’s model year and submodel before buying to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Ram 2500 models 2019–2025 (Power Wagon, Big Horn, Laramie, Limited, Longhorn, Lone Star, Tradesman, Rebel and related trims)\u003c\/li\u003e\n  \u003cli\u003eFits Ram 3500 models 2019–2025 (including Big Horn, Laramie, Limited, Lone Star, Tradesman and Limited Longhorn)\u003c\/li\u003e\n  \u003cli\u003eCompatible with Ram 4500 and 5500 base models 2019–2025\u003c\/li\u003e\n  \u003cli\u003eReplaces OE part numbers: 68362197AA \/ CH1068166 — confirm OE number and photos before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward and requires only basic tools. The bracket ships with the mounting screws and inserts so you won’t need additional parts in most cases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne pre-drilled front plate bracket molded to OE shape\u003c\/li\u003e\n  \u003cli\u003eFastener screws and screw inserts included for a secure fit\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on replacement — remove the old frame and attach the new bracket\u003c\/li\u003e\n  \u003cli\u003eFit check recommended: align bracket to bumper opening before final tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eWocch uses a heavy-duty ABS formulation designed for automotive exterior use. The part resists temperature extremes and sunlight to maintain shape and appearance over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength ABS resists cracking and warping under normal conditions\u003c\/li\u003e\n  \u003cli\u003eBlack finish resists fading and keeps a factory-like look\u003c\/li\u003e\n  \u003cli\u003eDurable under road debris and regular cleaning\u003c\/li\u003e\n  \u003cli\u003eManufactured tolerances match OE mounting points for reliable fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this bracket match the look of my bumper?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is intended to blend with the factory bumper opening and maintain a stock appearance. Its low-profile design keeps the license plate close to the bumper for a clean finish.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatte black finish designed to complement factory bumpers\u003c\/li\u003e\n  \u003cli\u003eLow-profile contour follows original bumper lines\u003c\/li\u003e\n  \u003cli\u003eIdeal when replacing cracked or missing OE plate holders\u003c\/li\u003e\n  \u003cli\u003eNo trimming required when matched to listed models and years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Wocch front license plate bracket is aimed at Ram owners who need a reliable, factory-style replacement for a damaged or missing front plate mount. It’s especially useful for technicians, fleet managers and DIY owners of 2019–2025 Ram 2500\/3500\/4500\/5500 trucks who want a quick, OE-compatible repair without aftermarket modification. Confirm your truck’s year, trim and the OE part number (68362197AA \/ CH1068166) before purchase to ensure a proper match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace part number 68362197AA?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This Wocch bracket is a direct replacement for OE part 68362197AA (CH1068166). Confirm your OE number and vehicle year before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting screws included with the bracket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes one license plate bracket plus the necessary screws and fastener inserts for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67592978825401,"sku":"B0D9N75JM7","price":62.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-bracket-front-view_b0b9714e-5e32-4d7c-b025-d1305792f598.jpg?v=1790570513"},{"product_id":"wocch-front-license-plate-bracket-for-dodge-ram-1500-dt-2019-2024-no-drill-oem-style-abs-black","title":"Wocch Front License Plate Bracket for Dodge Ram 1500 DT 2019-2024 — No-Drill OEM-Style ABS, Black","description":"\u003cstrong\u003eWocch front license plate frame is a no-drill, OEM-style bumper mounting bracket designed to fit most Dodge Ram 1500 DT models from 2019 through 2024 (excluding Rebel, TRX and several other submodels).\u003c\/strong\u003e\n\n\u003cp\u003eIf you need a clean, factory-looking solution to mount a front license plate on a compatible Ram 1500, this Wocch bracket provides a direct-replacement design that matches original equipment part numbers for an accurate fit. Built from high-temperature resistant ABS, it resists fading and stays sturdy through daily driving. The kit arrives with the bracket and the screws required for installation so you can fit it quickly without modifying the bumper.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ram 1500 years and trims will this bracket work with?\u003c\/h3\u003e\n\u003cp\u003eThis bracket fits Ram 1500 DT models from 2019 through 2024 across many common trims including Big Horn, HFE, Laramie, Limited, Lone Star, Sport, and Tradesman. It does not fit DS bumpers or specialty models listed below, so double-check your trim and year before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2019–2024 Ram 1500 DT (Big Horn, HFE, Laramie, Limited, Lone Star, Sport, Tradesman)\u003c\/li\u003e\n  \u003cli\u003eNot compatible: Rebel, TRX, DS bumper variants\u003c\/li\u003e\n  \u003cli\u003eSpecific exclusions: 2019–2021 Laramie Longhorn, 2021–2024 Limited Longhorn, 2021 Longhorn, 2020–2021 Special Service, 2019 SXT\u003c\/li\u003e\n  \u003cli\u003eVerify OE numbers and images before purchase to avoid wrong fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the no-drill installation work and what’s included?\u003c\/h3\u003e\n\u003cp\u003eThe bracket is designed as a bumper-mounted replacement, using factory mounting points instead of drilling new holes. The package includes one front license plate bracket and the necessary screws for secure attachment. Installation is straightforward for DIYers familiar with basic hand tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUses existing bumper mounting points — no cutting or drilling required\u003c\/li\u003e\n  \u003cli\u003eComes with screws for a complete mounting kit\u003c\/li\u003e\n  \u003cli\u003eSimple install process suitable for most owners — quick bolt-on fit\u003c\/li\u003e\n  \u003cli\u003eFollow vehicle-specific instructions and verify alignment before tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does this Wocch bracket offer?\u003c\/h3\u003e\n\u003cp\u003eManufactured from heavy-duty ABS plastic, the bracket resists heat and UV exposure to minimize fading and maintain appearance over time. Its OEM-style shape is made for repeated use so it performs well under normal road conditions without deforming.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from high-quality ABS for strength and weather resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature tolerance and UV resistance to reduce discoloration\u003c\/li\u003e\n  \u003cli\u003eOEM fit helps prevent stress points that can cause cracking\u003c\/li\u003e\n  \u003cli\u003eBlack finish blends with factory bumpers for a discreet look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I confirm this bracket is the right replacement part?\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, compare your truck’s model year, submodel, and the bumper style to the product listing images and the listed part numbers (68274215AD \/ 68274215AE, Partslink CH1068151). Checking those details helps prevent purchasing the wrong bracket for special trims or service models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatch your year\/model\/submodel against the compatibility list in the description\u003c\/li\u003e\n  \u003cli\u003eConfirm part numbers 68274215AD or 68274215AE when possible\u003c\/li\u003e\n  \u003cli\u003eInspect your bumper for DS vs DT style to confirm fitment\u003c\/li\u003e\n  \u003cli\u003eContact seller with photos if you’re unsure about compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Wocch front license plate bracket is aimed at Ram 1500 owners (DT chassis, selected trims from 2019–2024) who want a reliable, OEM-style mounting solution without drilling their bumper. It’s ideal for buyers replacing a damaged bracket, adding a front plate to meet local regulations, or restoring a factory look after aftermarket changes—provided the vehicle matches the listed compatible models and exclusions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this bracket require drilling the bumper?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This Wocch bracket is a no-drill, bolt-on replacement using existing bumper mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it fit my 2020 Ram 1500 Rebel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It does not fit Rebel or TRX models or DS bumper variants; confirm your submodel before buying.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Wocch","offers":[{"title":"Default Title","offer_id":67593093906617,"sku":"B0D6FX242N","price":62.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/wocch-front-license-plate-frame-front-view_8f0b2715-0ff5-430b-9c4b-61a5c136448b.jpg?v=1790571822"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/wocch-front-license-plate-frame-front-view_8f0b2715-0ff5-430b-9c4b-61a5c136448b.jpg?v=1790612743","url":"https:\/\/redleafauto.ca\/collections\/wocch.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}