{"title":"YEHERIT","description":"\u003cp\u003eBrowse 38 YEHERIT products at RedLeaf Auto, including engine parts, engine cooling \u0026amp; a\/c parts and fuel system parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"yeherit-coolant-reservoir-tank-for-ram-2500-3500-4500-5500-2013-2018-6-7l-direct-fit-with-sensor-cap","title":"YEHERIT Coolant Reservoir Tank for Ram 2500\/3500\/4500\/5500 2013-2018 — 6.7L Direct-Fit with Sensor \u0026 Cap","description":"\u003cstrong\u003eYEHERIT coolant reservoir tank with integrated sensor and cap replaces factory overflow bottle for 2013–2018 Ram 2500\/3500\/4500\/5500 with the 6.7L engine.\u003c\/strong\u003e\n\n\u003cp\u003eThis replacement coolant overflow tank is designed to match OE fitment and restore correct coolant level monitoring and overflow control for Cummins 6.7L-equipped Ram trucks. Molded from heat- and pressure-resistant plastic and supplied with the sensor port and matching cap, the assembly is a direct-fit option for owners replacing worn, cracked, or leaking expansion tanks. Confirm your vehicle’s year and part number before ordering to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this tank restore my truck's cooling system?\u003c\/h3\u003e\n\u003cp\u003eReplacing a damaged reservoir ensures proper coolant expansion control and accurate level sensing, preventing air from entering the cooling loop and helping the cooling system function as intended. The included sensor port allows the truck’s ECU and dash gauge to monitor fluid level and trigger alerts if topping up is needed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRestores coolant overflow capacity and venting.\u003c\/li\u003e\n\u003cli\u003eRe-establishes level sensing via the sensor opening.\u003c\/li\u003e\n\u003cli\u003ePrevents coolant loss from cracks or degraded plastic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my Ram 2500\/3500\/4500\/5500 with a 6.7L engine?\u003c\/h3\u003e\n\u003cp\u003eThis YEHERIT tank is made for 2013–2018 Ram trucks equipped with the L6 6.7L engine and replaces several OEM part numbers. Always cross-check your current tank’s part number or vehicle compatibility before purchase to guarantee a correct match.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible model years: 2013–2018 Rams.\u003c\/li\u003e\n\u003cli\u003eDirect replacement for numbers including 68166475AC, 68096261AA, 68166475AB.\u003c\/li\u003e\n\u003cli\u003eFits 2500, 3500, 4500 and 5500 chassis with 6.7L engine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and durability features?\u003c\/h3\u003e\n\u003cp\u003eConstructed from durable, heat- and pressure-resistant plastic, the tank is engineered to withstand under-hood temperatures and typical cooling system pressures. Reinforced mounting points and a secure cap seating help reduce the likelihood of leaks and premature failure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-quality plastic resists heat and engine bay stress.\u003c\/li\u003e\n\u003cli\u003eReinforced fittings and sensor opening for reliable installation.\u003c\/li\u003e\n\u003cli\u003eDesigned for long-term resistance to cracking and deformation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT reservoir is designed as a bolt-in replacement requiring no cutting or modification; typical DIY tools and basic mechanical skills are sufficient. Follow vehicle service guidance for coolant draining and refilling, bleed any trapped air, and verify the sensor connection and cap seal after installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect-fit design requires no modifications.\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on swap if matching OEM mounting points.\u003c\/li\u003e\n\u003cli\u003eRemember to refill coolant and properly bleed the system after replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This coolant reservoir is ideal for Ram owners and mechanics needing a dependable OE-style replacement for worn, cracked, or leaking overflow tanks on 2013–2018 6.7L trucks. It suits fleet maintainers, DIY enthusiasts, and repair shops looking for a cost-effective, direct-fit part that includes the sensor-capable opening and a matching cap for a complete, ready-to-install solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tank include the electrical sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tank has the sensor port to accept the level sensor, but the sensor itself may need to be transferred from your original tank or purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this a direct bolt-on replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the YEHERIT reservoir is a direct-fit replacement for compatible 2013–2018 Ram 6.7L models and requires no modifications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67584962658489,"sku":"B0F1CCDVTM","price":206.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-view-coolant-reservoir.jpg?v=1790461190"},{"product_id":"yeherit-ea888-timing-chain-kit-for-audi-vw-1-8l-2-0l-full-kit-with-upper-front-covers-tensioners","title":"YEHERIT EA888 Timing Chain Kit for Audi \u0026 VW 1.8L\/2.0L — Full Kit with Upper \u0026 Front Covers, Tensioners","description":"\u003cstrong\u003eYEHERIT EA888 Engine Timing Chain Kit with upper and front covers for Audi and Volkswagen 1.8L\/2.0L engines—complete replacement for EA888 Gen1\/Gen2 applications.\u003c\/strong\u003e\n\n\u003cp\u003eThis comprehensive timing chain kit supplies everything needed to replace worn timing and balance shaft chains on many Audi and Volkswagen EA888 1.8L and 2.0L engines. The kit bundles chains, tensioners, guides, oil pump components and both front and upper timing covers so you can restore correct timing, oil sealing and component alignment in one repair job. Compatibility notes and OE cross-references are included so you can confirm fitment before installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles use this YEHERIT EA888 timing chain kit?\u003c\/h3\u003e\n\u003cp\u003eThis kit fits a broad range of Audi and Volkswagen models equipped with EA888 Gen1 and Gen2 1.8L and 2.0L four-cylinder engines. It covers model years and trims across compact cars, sedans, coupes and SUVs—verify year and engine code against the compatibility list before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSupported Audi: A3, A3 Quattro, S3, A4, A4 Quattro, A5, A5 Quattro, A6, A6 Quattro, Q3, Q3 Quattro, Q5, TT and TT Quattro (specific years in product details)\u003c\/li\u003e\n  \u003cli\u003eSupported VW: Jetta, Golf, Passat, Eos, CC, Beetle, Tiguan (specific years in product details)\u003c\/li\u003e\n  \u003cli\u003eImportant fitment note: upper timing cover fits EA888 Gen1\/Gen2 only; not compatible with EA888 Gen3 engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and which OE numbers does it replace?\u003c\/h3\u003e\n\u003cp\u003eThe kit is supplied as a full assembly so you can replace all timing-related wear items at once. That reduces the risk of premature failure from mixing old and new components and simplifies labor during engine service.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKit contents: upper timing cover, front timing cover, timing chains (primary, balance shaft, oil pump), chain guides, guide rails, slide rail, timing teeth, oil pump, chain tensioners, balance shaft tensioner, mounting screws\u003c\/li\u003e\n  \u003cli\u003eReplaces common OE references: 06H103269H\/L, 06H109210AG, 06H109509AT, 06K115225C, 06H109158A\/06K109158AD, 06H109469T\/AP\/AH\/AN, 06H109509Q\/P, 06H109467AF, 06K109507F, 06K109467K, N91096702\u003c\/li\u003e\n  \u003cli\u003eAll metal and polymer components are selected for endurance and dimensional accuracy to maintain timing and oil sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this kit affect engine performance and maintenance?\u003c\/h3\u003e\n\u003cp\u003eReplacing degraded timing chains and worn tensioners helps restore accurate valve timing and reduces the chance of catastrophic timing-related failures. While not a performance upgrade, fresh timing components improve engine stability and can support more consistent fuel economy and responsiveness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRe-establishes correct valve timing and phasing across intake and exhaust events\u003c\/li\u003e\n  \u003cli\u003eNew seals and covers reduce oil leaks at the timing cover area\u003c\/li\u003e\n  \u003cli\u003eFresh chain guides and tensioners reduce rattle and chain stretch-related noise\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Mechanics, DIY technicians and fleet owners working on Audi or Volkswagen EA888 Gen1\/Gen2 engines who need a complete timing chain replacement solution. Choose this kit if you want a single-purchase option that replaces all critical timing components and both timing covers, but confirm your engine generation and the OE part numbers match the vehicle before ordering. If your vehicle uses EA888 Gen3, this kit's upper cover will not fit—review engine codes and the product’s compatibility list to ensure correct selection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit EA888 Gen3 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The upper timing cover in this kit fits EA888 Gen1 and Gen2 only; Gen3 applications are not supported.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are all necessary parts included for a full timing replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes chains, tensioners, guides, oil pump, and both timing covers for a comprehensive replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67585080197305,"sku":"B0F59BHPM3","price":290.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-ea888-front-timing-cover.jpg?v=1790466428"},{"product_id":"yeherit-front-hvac-heater-blower-motor-871030c051-for-toyota-sequoia-sienna-brushless-quiet-efficient","title":"YEHERIT Front HVAC Heater Blower Motor 871030C051 for Toyota Sequoia \u0026 Sienna — Brushless, Quiet Efficient","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT 871030C051 is a direct-replacement brushless front HVAC heater blower motor designed to restore reliable, quiet airflow in compatible Toyota Sequoia and Sienna models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis blower motor replaces worn or noisy front-side units and matches original equipment (OE) fit and mounting points for a straightforward swap. It uses a brushless motor design for improved efficiency, reduced noise, and longer service life compared with traditional brushed motors. The unit is manufactured to OE specifications and carries cross-reference numbers 700298, 871030C051, 87103-0C051, 615-50184, and 75050, making it suitable for specific Toyota model years listed below.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Toyota models and years does this blower motor fit?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT 871030C051 is engineered to fit the front HVAC\/heater blower locations on Toyota Sequoia and Sienna models across multiple production years. Confirm compatibility by matching the OE part number or checking vehicle year and HVAC layout before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eToyota Sequoia: 2008–2022 (front-side blower application)\u003c\/li\u003e\n  \u003cli\u003eToyota Sienna: 2011–2018 (front-side blower application)\u003c\/li\u003e\n  \u003cli\u003eCompatible OE references: 700298, 871030C051, 87103-0C051, 615-50184, 75050\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the brushless design benefit cabin comfort and durability?\u003c\/h3\u003e\n\u003cp\u003eThe brushless motor reduces friction points found in brushed motors, delivering quieter operation and less electrical noise, which helps keep cabin sound levels lower. Fewer moving contact parts also mean reduced wear over time and a longer expected operating life under normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuieter blower operation for a more pleasant cabin\u003c\/li\u003e\n  \u003cli\u003eImproved energy efficiency compared with brushed motors\u003c\/li\u003e\n  \u003cli\u003eLonger service life with less maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and fitment checks?\u003c\/h3\u003e\n\u003cp\u003eThis unit is built to meet OE mounting and electrical specifications so it installs nearly like-for-like with the original blower motor. Basic hand tools and simple steps are typically needed for removal and replacement, but always consult a service manual or repair guide specific to your vehicle for torque values and safety precautions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned to match OEM mounting points and connectors\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play electrical interface for many model variants\u003c\/li\u003e\n  \u003cli\u003eRecommended: verify OE part number and test electrical connectors before final assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and quality features are included?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT blower motor emphasizes durability and dependable airflow control, manufactured from quality materials to withstand repeated heating and cooling cycles. It’s subjected to standard quality controls so it meets everyday driving demands without introducing vibration or electrical discrepancies.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium materials for wear resistance and stability\u003c\/li\u003e\n  \u003cli\u003eBrushless motor for steady airflow and lower noise\u003c\/li\u003e\n  \u003cli\u003eOE cross-reference numbers included for easier verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This blower motor is intended for vehicle owners, DIY mechanics, and professional technicians who need a reliable, OE-compatible replacement for the front HVAC\/heater blower in select Toyota Sequoia (2008–2022) and Sienna (2011–2018) models. It’s a good match when the original unit is noisy, intermittently fails, or shows signs of reduced airflow. Always confirm fit by checking the vehicle year and OE part number before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this blower motor a direct replacement for my Toyota?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your vehicle is a Toyota Sequoia 2008–2022 or Sienna 2011–2018 and the OE number matches (871030C051 or listed cross-references), it is designed as a direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the brushless design make a noticeable noise reduction?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, brushless motors typically run quieter than brushed units, reducing cabin noise and delivering smoother airflow.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67585088487609,"sku":"B0DS5N8WLW","price":192.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-blower-motor-front-view.jpg?v=1790466853"},{"product_id":"yeherit-hydraulic-valve-lifters-set-of-16-for-gen3-gen4-ls-gen5-lt-engines-guide-trays-oe-fit-12499225-17122490","title":"YEHERIT Hydraulic Valve Lifters Set of 16 for Gen3\/Gen4 LS \u0026 Gen5 LT Engines — Guide Trays, OE Fit 12499225\/17122490","description":"\u003cstrong\u003eYEHERIT Hydraulic Valve Lifters Set of 16 with Guide Trays is a direct-fit replacement lifter kit designed for Gen 3, Gen 4 LS and Gen 5 LT engines that restores proper valve actuation and supports high-RPM use.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Chevrolet or GM-compatible engine uses LS or LT-series valve lifters and you need a reliable, full-set replacement, this kit delivers 16 hydraulic lifters plus guide trays engineered to match OE fitment numbers like 12499225 and 17122490. Built from durable materials with attention to tolerances, the lifters are intended for a wide range of V8 engines — including LS1, LS2, LS3, LS6, LS7, LM7, LQ4, LQ9, L83, L86 and LT1 — across 4.8L to 6.2L displacements. The set is offered to help maintain valve stability, reduce lash, and perform under higher engine speeds when used in appropriate applications.\u003c\/p\u003e\n\n\u003ch3\u003eWill these lifters fit my LS or LT engine?\u003c\/h3\u003e\n\u003cp\u003eYes — this YEHERIT kit was designed for direct compatibility with many Gen 3 and Gen 4 LS engines and Gen 5 LT engines. Verify your engine family and cross-check the OE part numbers listed to confirm match before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible families: LS1, LS2, LS3, LS6, LS7, LM7, LQ4, LQ9, L83, L86, LT1\u003c\/li\u003e\n  \u003cli\u003eEngine sizes supported: 4.8L, 5.3L, 5.7L, 6.0L, 6.2L\u003c\/li\u003e\n  \u003cli\u003eOE cross-reference: 12499225, 17122490 and related numbers\u003c\/li\u003e\n  \u003cli\u003eIncludes: 16 hydraulic lifters plus guide trays for proper alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these lifters affect performance and reliability?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT lifters are manufactured with durable materials and precision machining to mirror original equipment function. For high-performance or high-RPM engines, they provide consistent valve actuation and are engineered to resist premature wear when installed and maintained correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision tolerances for consistent valve travel\u003c\/li\u003e\n  \u003cli\u003eMaterial choice aims to improve wear resistance over time\u003c\/li\u003e\n  \u003cli\u003eEngineered to handle elevated RPM in appropriate applications\u003c\/li\u003e\n  \u003cli\u003eSold as a complete set to ensure matched behavior across cylinders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and what should I prepare for installation?\u003c\/h3\u003e\n\u003cp\u003eThe package contains 16 hydraulic lifters and guide trays sufficient for a full V8 valve train refresh. Standard installation practices apply: clean mating surfaces, inspect bores and pushrods, and follow torque and break-in procedures recommended for your engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKit contents: 16 lifters + guide trays\u003c\/li\u003e\n  \u003cli\u003ePre-install checks: cylinder head and bore cleanliness, pushrod straightness\u003c\/li\u003e\n  \u003cli\u003eTools: basic engine hand tools, torque wrench, assembly lube\u003c\/li\u003e\n  \u003cli\u003eRecommended: verify OE part numbers and service manual procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis YEHERIT lifter set is crafted as a practical replacement for specific OE numbers (12499225, 17122490 and related references) and aims to fit seamlessly into the specified LS and LT engine families without extra modification. It provides a cost-effective way to refresh valve-train components when wear or noise indicates lifter service is due.\u003c\/p\u003e\n\n\u003cp\u003eWho is this product for? Automotive owners and technicians who service GM LS-family or LT1 engines seeking a full set replacement to restore valve-train function. It’s appropriate for routine rebuilds, performance engine refreshes, or whenever lifter replacement is required; confirm fitment to your engine and follow recommended installation and break-in practices for best long-term results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these lifters match OE part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They cross-reference OE numbers including 12499225 and 17122490; verify compatibility against your engine VIN or service manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lifters suitable for high-RPM engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They’re engineered for high-performance use and higher RPM when installed correctly, though follow engine-specific build and break-in procedures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67585133412537,"sku":"B0DLFQCLKB","price":186.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-lifters-front-packaging.jpg?v=1790468517"},{"product_id":"yeherit-3-adjustable-front-leveling-lift-kit-for-1999-2004-ford-f-250-f-350-powder-coated-mini-leaf-packs","title":"YEHERIT 3\\\" Adjustable Front Leveling Lift Kit for 1999–2004 Ford F-250\/F-350 — Powder-Coated Mini Leaf Packs","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT's 3\" Adjustable Front Leveling Lift Kit raises the front of compatible 1999–2004 Ford F-250\/F-350 Super Duty 4x4 trucks by three inches with adjustable mini leaf spring packs and all installation hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete lift kit is built to give older Super Duty trucks a balanced, level stance while keeping factory components usable. The package contains powder-coated adjustable mini leaf springs, U-bolts, pan-arm bar drop\/track bar spacers and the necessary hardware — designed for front leaf-sprung, non-lifted stock vehicles. No cutting or body modification is required, though professional installation is recommended.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ford trucks will this lift kit fit and what does it exclude?\u003c\/h3\u003e\n\u003cp\u003eThis kit fits 1999–2004 Ford F-250 and F-350 Super Duty models with front leaf springs and 4x4\/4WD drive lines. It is intended for standard cab and crew cab models built after the early 1999 production months and excludes dually trucks with overloaded rear leaf setups without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 1999–2004 F-250 and F-350 Super Duty 4x4 with front leaf springs\u003c\/li\u003e\n  \u003cli\u003eExcluded: early January–February 1999 production variants and some dually\/overload leaf configurations\u003c\/li\u003e\n  \u003cli\u003eWorks with gas or diesel engines, including V8 and V10\u003c\/li\u003e\n  \u003cli\u003eDesigned for non-lifted, factory-setup trucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the adjustable 3\" lift affect ride height and alignment?\u003c\/h3\u003e\n\u003cp\u003eThe kit provides an adjustable three-inch front raise so you can dial in a level stance or slight rake based on your load and tire size. Because it is designed to keep factory attachment points, it minimizes changes to steering geometry and maintains compatibility with original shock absorbers and pan-arm bar components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable mini leaf packs let you fine-tune front ride height\u003c\/li\u003e\n  \u003cli\u003eMaintains factory shock and pan-arm bar compatibility in most cases\u003c\/li\u003e\n  \u003cli\u003eHelps improve ground clearance for trail or worksite use\u003c\/li\u003e\n  \u003cli\u003eProfessional alignment recommended after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and parts are included in the package?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships as a full front leveling solution with everything needed to install the mini leaf packs and spacers at the axle. U-bolts and related fasteners are included to simplify installation, though specialized tools and qualified installation skills are advised for safe, long-term results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePowder-coated adjustable 3\" mini leaf spring packs (front)\u003c\/li\u003e\n  \u003cli\u003eComplete set of U-bolts and mounting hardware\u003c\/li\u003e\n  \u003cli\u003ePan-arm bar drop and track bar spacers to correct geometry\u003c\/li\u003e\n  \u003cli\u003eAll additional necessary fasteners for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any fitment or installation notes I should know?\u003c\/h3\u003e\n\u003cp\u003eThe kit is built for stock, non-lifted trucks and typically works with factory shocks and steering links, but some vehicles (especially duallys with wider rear axles or overload leaves) may need different u-bolts or extra parts. Installer experience is important; the manufacturer does not include step-by-step instructions, so plan professional fitting and alignment afterward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo cutting or permanent modifications required for compatible models\u003c\/li\u003e\n  \u003cli\u003eDually trucks with 4+ inch wider rear axles will need specific u-bolts\u003c\/li\u003e\n  \u003cli\u003eProfessional installation and wheel alignment recommended\u003c\/li\u003e\n  \u003cli\u003eFactory shocks generally remain usable with this kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YEHERIT 3\" Adjustable Front Leveling Lift Kit is aimed at owners of 1999–2004 Ford F-250 and F-350 Super Duty 4x4 trucks who want a reliable, adjustable front lift to improve stance, ground clearance and tire fitment while preserving factory components. It suits truck owners who prefer a bolt-on solution and can arrange professional installation and alignment; it is not intended for early-production 1999 models or heavy-duty duallys without additional modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit work with my factory shocks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. In most cases factory shocks remain compatible, but confirm fitment on vehicles with non-stock suspension.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require cutting or welding?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No cutting or welding is required for compatible models, though professional installation is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67585143210169,"sku":"B0D9K3TDBW","price":400.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-packaged-kits.jpg?v=1790468884"},{"product_id":"yeherit-cvvt-camshaft-sprocket-pair-for-hyundai-kia-intake-24350-2e700-exhaust-24370-2e020-oem-fit-steel","title":"YEHERIT CVVT Camshaft Sprocket Pair for Hyundai \u0026 Kia — Intake 24350-2E700 \u0026 Exhaust 24370-2E020, OEM-fit Steel","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT 24350-2E700 (intake) and 24370-2E020 (exhaust) are direct-fit CVVT camshaft sprockets engineered to replace worn timing gears on select Hyundai and Kia 2.0L naturally aspirated engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of camshaft sprockets is manufactured to meet OEM tolerances and provide a reliable replacement for vehicles that use Continuously Variable Valve Timing (CVVT) systems. Built from high-grade steel, the gears resist wear and corrosion while maintaining the dimensional accuracy needed for precise valve timing. Whether you're performing a scheduled timing service, repairing a timing-related fault, or restoring a high-mileage engine, these sprockets are shaped and drilled to match factory fitment and alignment points.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles are compatible with these camshaft sprockets?\u003c\/h3\u003e\n\u003cp\u003eThese gears are intended for specific Hyundai and Kia models that use the 2.0L naturally aspirated engine without turbocharging. Confirm part numbers or consult your service manual to ensure correct application before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHyundai: Elantra (2017–2020) 2.0L; Kona (2018–2021) 2.0L; Veloster (2019–2021) 2.0L\u003c\/li\u003e\n  \u003cli\u003eKia: Forte (2017–2022) 2.0L and Forte5 (2017–2018) 2.0L; Soul (2020–2022) 2.0L; Seltos (2021–2022) 2.0L\u003c\/li\u003e\n  \u003cli\u003eMatch intake part 24350-2E700 \/ 243502E700, exhaust part 24370-2E020 \/ 243702E020\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these CVVT sprockets affect engine timing and performance?\u003c\/h3\u003e\n\u003cp\u003eCamshaft sprockets are key to accurate valve timing. These CVVT-compatible gears transfer rotational position between the timing chain and camshafts, enabling the variable timing actuator to optimize valve events across operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintain OEM tooth profiles for precise chain engagement and timing stability.\u003c\/li\u003e\n  \u003cli\u003eSupport CVVT actuator operation for improved combustion control.\u003c\/li\u003e\n  \u003cli\u003eReduce risk of timing drift that can cause rough idle or poor throttle response.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and quality features do the gears offer?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT camshaft sprockets are fabricated from hardened steel and finished to resist surface corrosion and wear. They are produced to meet or exceed factory dimensional standards so installation and alignment go smoothly without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-grade steel for long service life and resistance to pitting.\u003c\/li\u003e\n  \u003cli\u003eEngineered to OEM tolerances for direct fit and correct timing alignment.\u003c\/li\u003e\n  \u003cli\u003eSurface treatment improves corrosion resistance and limits premature wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installing these replacement sprockets?\u003c\/h3\u003e\n\u003cp\u003eProper installation requires inspection of the timing chain, tensioner, guides, and camshaft actuators. Replacing sprockets on a worn system without refreshing related components may shorten the lifespan of the new parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify the engine application and both part numbers before ordering.\u003c\/li\u003e\n  \u003cli\u003eInspect and replace the timing chain, tensioner, and guides if worn or noisy.\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer torque specs and timing marks during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These YEHERIT CVVT camshaft sprockets are aimed at professional mechanics, independent repair shops, and experienced DIYers servicing Hyundai and Kia 2.0L naturally aspirated engines. They are suitable for owners addressing timing-component wear, repairing CVVT-related issues, or restoring engine timing after component failure. If you want a precision-fit, OEM-standard replacement set of intake and exhaust sprockets with durable steel construction, this kit serves as a direct-fit option—just confirm model compatibility and perform a full timing-system inspection during installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these sprockets direct replacements for OEM parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are manufactured to meet or exceed OEM specifications for the listed part numbers and models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace any other parts when installing these sprockets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It's recommended to inspect and, if needed, replace the timing chain, tensioner, and guides to ensure long-term reliability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67585484685497,"sku":"B0DZ26QZ1H","price":196.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-intake-and-exhaust-sprockets-front-view.jpg?v=1790471400"},{"product_id":"yeherit-1-4l-turbocharger-replacement-for-chevrolet-cruze-sonic-trax-buick-encore-kit-with-gasket-bypass-valve","title":"YEHERIT 1.4L Turbocharger Replacement for Chevrolet Cruze Sonic Trax Buick Encore — Kit with Gasket \u0026 Bypass Valve","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT 667-203 1.4 Turbocharger with gasket is a direct-replacement turbocharger kit engineered to restore boost and fit 1.4L turbo GM engines used in Chevrolet Cruze, Sonic, Trax and Buick Encore models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete turbo kit is built to OEM dimensions and ships with the turbocharger assembly plus essential gaskets and a bypass valve, so you can replace a worn unit with minimal extra parts. The assembly is cast and coated for heat and corrosion resistance and is offered as a compatible replacement for part numbers such as 55565353, GT1446V and 667203. It’s designed for 1.4L turbocharged GM engines from select model years of Cruze, Cruze Limited, Sonic, Trax and Encore.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this turbocharger fit?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT 667-203 is specified for 1.4L turbo applications in several GM models. Confirm fit by cross-referencing the listed part numbers and your vehicle’s year and engine code before ordering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Cruze: 2011–2015 and 2016 Cruze Limited\u003c\/li\u003e\n\u003cli\u003eChevrolet Sonic: 2012–2020\u003c\/li\u003e\n\u003cli\u003eChevrolet Trax: 2013–2018\u003c\/li\u003e\n\u003cli\u003eBuick Encore: 2013–2018\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included in the kit and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThis kit includes the turbocharger plus the common seals and valves needed for a straightforward swap, reducing the chance of leaks or follow-up disassembly. The included components help ensure correct oil and exhaust routing and a functional bypass system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurbocharger assembly (prebalanced and coated)\u003c\/li\u003e\n\u003cli\u003eIntercooler bypass (wastegate\/actuator) valve\u003c\/li\u003e\n\u003cli\u003eExhaust and intake iron gaskets\u003c\/li\u003e\n\u003cli\u003ePaper oil return gasket and copper oil inlet gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this turbo meet durability and performance expectations?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT manufactures this turbo with heat-resistant materials and an anti-corrosion finish to withstand elevated exhaust temperatures and road exposure. It’s not a performance upgrade product but a robust replacement built for reliable operation under typical driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-temperature resistant casting and coatings\u003c\/li\u003e\n\u003cli\u003ePrecision-balanced rotating assembly for smooth operation\u003c\/li\u003e\n\u003cli\u003eCorrosion protection for extended service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm compatibility with my current turbo’s part number?\u003c\/h3\u003e\n\u003cp\u003eCheck your old turbo’s part number and compare it to the cross-reference list supplied with this product. If your worn unit matches any of the replacement numbers, this turbo is intended as a drop-in substitute.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCross-references: 667-203, 55565353, GT1446V and related OEM numbers\u003c\/li\u003e\n\u003cli\u003eVerify engine size (1.4L turbo) and vehicle model-year range\u003c\/li\u003e\n\u003cli\u003eInspect flange and actuator locations for physical match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This turbocharger kit is aimed at DIY mechanics, independent repair shops and fleet maintainers who need a reliable, OEM-dimension replacement for failed or worn 1.4L turbochargers on compatible Chevy and Buick models. If you want a direct-fit replacement with the main gaskets and bypass valve included to minimize additional parts purchasing, this kit provides a practical solution. Always confirm compatibility with your vehicle’s service manual or a parts specialist before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this turbo a direct replacement for part number 55565353?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this YEHERIT kit is listed as a compatible replacement for 55565353 and related OEM numbers for 1.4L GM turbos.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the gaskets needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it ships with intake and exhaust iron gaskets, paper oil return gasket, copper oil inlet gaskets and a bypass valve.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67585490518201,"sku":"B0F58YZHVD","price":430.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-view-turbocharger.jpg?v=1790471580"},{"product_id":"yeherit-aluminum-lower-intake-manifold-for-chrysler-dodge-jeep-ram-05184199af-direct-fit-corrosion-resistant","title":"YEHERIT Aluminum Lower Intake Manifold for Chrysler\/Dodge\/Jeep\/Ram — 05184199AF Direct-Fit, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT's 05184199AF full-aluminum lower intake manifold is a direct-fit, corrosion-resistant replacement designed to restore airflow integrity and durability for compatible Chrysler-family engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis upgraded lower intake manifold replaces fragile factory plastic units with a robust, full-aluminum construction aimed at reducing heat soak and long-term cracking. It is manufactured to match OEM mounting points and ports for a straightforward swap and carries the part references 05184199AF, 5184199AF, and 05281802AA so you can confirm compatibility before purchase. Built to withstand the demands of everyday driving, fleet use, and performance-oriented applications, the manifold helps maintain consistent intake routing and supports reliable engine operation across a wide range of model years.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this manifold fit?\u003c\/h3\u003e\n\u003cp\u003eThis manifold fits many Chrysler, Dodge, Jeep and Ram models from the 2011–2021 era that originally used this style of lower intake. Verify your VIN or OEM part number against 05184199AF, 5184199AF, or 05281802AA to ensure exact compatibility. Installation is intended to be bolt-on where the original lower intake was used.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eJEEP: Grand Cherokee (2011–2017), Cherokee (2014–2021), Wrangler (2012–2017)\u003c\/li\u003e\n  \u003cli\u003eDODGE: Journey (2011–2019), Grand Caravan (2011–2020), Durango (2011–2015), Charger \u0026amp; Challenger (2011–2021), Avenger (2011–2014)\u003c\/li\u003e\n  \u003cli\u003eCHRYSLER: Town \u0026amp; Country (2011–2016), 300 (2011–2021), 200 (2011–2017)\u003c\/li\u003e\n  \u003cli\u003eRAM: 1500 \u0026amp; 1500 Classic, C\/V, ProMaster 1500\/2500\/3500 across specified years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat advantages does an aluminum intake offer compared with the original plastic part?\u003c\/h3\u003e\n\u003cp\u003eAluminum brings greater structural strength and higher resistance to long-term heat and chemical exposure than molded plastic. That reduces the chance of warping, cracking, or vacuum leaks that can develop on older plastic manifolds, particularly under heavy use or elevated under-hood temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eImproved corrosion and heat resistance for extended lifespan\u003c\/li\u003e\n  \u003cli\u003eLess susceptibility to oil- or coolant-related degradation\u003c\/li\u003e\n  \u003cli\u003eBetter dimensional stability to preserve sealing and airflow\u003c\/li\u003e\n  \u003cli\u003eDurability suited to high-mileage and commercial service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is the installation and what should I check?\u003c\/h3\u003e\n\u003cp\u003eThe part is designed to match the factory mounting and port locations for a direct-replacement installation. Basic hand tools, torque specifications, and replacement gaskets are typically required; if any sensors, hoses, or brackets transfer from the old manifold, label and inspect them before removal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm OEM numbers (05184199AF \/ 5184199AF \/ 05281802AA) and vehicle fitment\u003c\/li\u003e\n  \u003cli\u003eReplace gaskets and check sealing surfaces for debris or damage\u003c\/li\u003e\n  \u003cli\u003eTransfer and inspect sensors, vacuum lines, and hardware during install\u003c\/li\u003e\n  \u003cli\u003eTorque bolts to factory spec and perform a vacuum\/pressure leak check\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this manifold affect engine performance or maintenance?\u003c\/h3\u003e\n\u003cp\u003eFunctionally, this component restores the intended air pathways and sealing the engine requires to run consistently; it is not a performance-modifying part but supports reliable operation. Because it resists common failure modes of plastic manifolds, it can reduce the likelihood of repeat repairs and the maintenance burden associated with intake leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores original airflow routing and vacuum integrity\u003c\/li\u003e\n  \u003cli\u003eReduces repeat repair frequency tied to plastic manifold failures\u003c\/li\u003e\n  \u003cli\u003eCompatible with stock engine tune and peripherals—no ECU changes needed\u003c\/li\u003e\n  \u003cli\u003eRecommended gasket replacement minimizes post-install leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: technicians, independent repair shops, fleet managers, and vehicle owners seeking a long-lasting replacement for a failed or aging lower intake manifold will benefit from this YEHERIT aluminum unit. If your vehicle matches the listed models or OEM references and you want a sturdy, corrosion-resistant alternative to the original plastic part, this manifold provides a direct-fit option engineered for durability and reliable day-to-day operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace the factory plastic lower intake manifold?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This full-aluminum unit is a direct-replacement option for compatible vehicles originally equipped with the plastic lower intake.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which OEM part numbers match this YEHERIT manifold?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The manifold corresponds to OEM numbers 05184199AF, 5184199AF, and 05281802AA for fitment checks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67585511030969,"sku":"B0DBVJW3DL","price":240.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-lower-intake-manifold-front-view.jpg?v=1790471910"},{"product_id":"yeherit-ac-compressor-with-clutch-for-ford-f-150-expedition-2007-2014-fs20-direct-fit-pag100-prefilled","title":"YEHERIT AC Compressor with Clutch for Ford F-150 \/ Expedition 2007-2014 — FS20 Direct-Fit, PAG100 Prefilled","description":"\u003cstrong\u003eYEHERIT AC Compressor with clutch is a direct-fit replacement compressor assembly engineered to restore air conditioning performance on compatible 2007–2014 Ford and Lincoln trucks and SUVs.\u003c\/strong\u003e\n\n\u003cp\u003eIf your vehicle’s A\/C has lost pressure, makes noise, or the clutch no longer engages, this complete compressor and clutch assembly is designed to replace worn original equipment without modification. Built to match FS20 compressor specifications and prefilled with PAG100 oil, the unit ships ready for installation by a qualified technician and aligns with a wide list of OE part numbers for reliable fitment.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines is this compressor compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis YEHERIT compressor works as a direct-replacement fit for many Ford and Lincoln models produced between 2006 and 2014. Confirm fitment by cross-referencing engine and year before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord Expedition 2007–2014 (5.4L)\u003c\/li\u003e\n  \u003cli\u003eFord F-150 2007–2014 (4.6L, 5.4L, 6.2L depending on year)\u003c\/li\u003e\n  \u003cli\u003eFord F-250\/F-350\/F-450\/F-550 Super Duty and select years with 4.6L, 5.4L, 6.4L, 6.8L engines\u003c\/li\u003e\n  \u003cli\u003eLincoln Navigator 2007–2014 (5.4L) and Lincoln Mark LT 2007–2008 (5.4L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat technical specifications and parts information should I know?\u003c\/h3\u003e\n\u003cp\u003eThe compressor follows FS20 specification and arrives precharged with the correct lubricant to simplify installation. It includes a six-groove pulley and the clutch assembly so you receive a complete rotating assembly in one unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompressor Type: FS20\u003c\/li\u003e\n  \u003cli\u003eOil Type: PAG100, prefilled with 170 ml (±10 ml)\u003c\/li\u003e\n  \u003cli\u003ePulley Grooves: 6; Clutch included\u003c\/li\u003e\n  \u003cli\u003eMultiple OE cross-reference numbers included for fit confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this unit match OEM quality and what should installers be aware of?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT provides an OEM-quality replacement crafted to meet original fit, finish, and mounting points. However, proper service procedures and certified tools are required for refrigerant handling and compressor installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design ensures bolt-on compatibility with listed applications\u003c\/li\u003e\n  \u003cli\u003ePrefilled oil reduces initial service steps but verify lubricant level after system evacuation and recharge\u003c\/li\u003e\n  \u003cli\u003eCertified A\/C technicians should evacuate and recharge refrigerant; follow local environmental regulations\u003c\/li\u003e\n  \u003cli\u003eInspect related components (receiver\/drier, expansion valve, hoses) to avoid contaminating the new compressor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance improvements can I expect after installing this compressor?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failing compressor with this assembly can restore system pressure, improve cabin cooling response, and eliminate clutch or bearing noise associated with worn components. Results depend on system condition and proper installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores compressor engagement and refrigerant circulation\u003c\/li\u003e\n  \u003cli\u003eImproves cooling efficiency when combined with proper recharge and system maintenance\u003c\/li\u003e\n  \u003cli\u003eReplaces worn clutch components to reduce noise and vibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This product is intended for owners and mechanics of Ford F-150, Expedition, Super Duty trucks, Lincoln Navigator, and Lincoln Mark LT in the listed years who need a full compressor-and-clutch replacement. It’s also suited to professional installers and repair shops that perform A\/C system evacuation, component replacement, and refrigerant recharge. If you’re unsure about compatibility, compare the OE part numbers provided or consult a qualified technician before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this compressor come prefilled with oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is prefilled with PAG100 oil at approximately 170 ml (±10 ml) for initial installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this unit fit my 2010 F-150 6.2L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This compressor lists compatibility with 2010 F-150 6.2L; verify fit by matching OE part numbers or vehicle VIN before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67585573716153,"sku":"B0D95B8PW6","price":300.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-ac-compressor-front-assembly.jpg?v=1790472185"},{"product_id":"yeherit-uf262-round-ignition-coil-kit-with-8-spark-plugs-8-wires-for-chevy-gmc-4-8l-6-0l-v8-full-bank-replacement","title":"YEHERIT UF262 Round Ignition Coil Kit with 8 Spark Plugs \u0026 8 Wires for Chevy\/GMC 4.8L-6.0L V8 — Full-Bank Replacement","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT 8-piece UF262 round ignition coil kit bundles eight round ignition coils with matching 41-962 platinum spark plugs and 9748-series spark plug wires to restore reliable ignition on compatible V8 GM trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete ignition set replaces worn or failed components on many Chevrolet, GMC and Cadillac vehicles with 4.8L, 5.3L and 6.0L V8 engines. The kit includes round-style UF262 coils (not square UF271), eight platinum spark plugs, and eight high-temperature spark plug wires—providing a matched group of parts intended to improve spark delivery, reduce misfires and make installation easier by swapping the full bank at once.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know these UF262 coils fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eConfirm fitment by checking the coil body shape and part numbers on your current coils; this kit uses the ROUND UF262 style. The listing covers many Chevy, GMC and Cadillac models, but year and engine variants vary—verify compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare your current coil to the UF262 round shape (not square UF271).\u003c\/li\u003e\n  \u003cli\u003eCross-reference part numbers included: UF262, D585, E254, C1251, 245262, GN10119, 5C1082, 8104577300, 12573190.\u003c\/li\u003e\n  \u003cli\u003eSupported models include Silverado, Tahoe, Suburban, Sierra, Yukon, Escalade EXT\/ESV, Avalanche, Trailblazer, Express, Envoy, Savana and H2—confirm engine size (4.8L\/5.3L\/6.0L V8).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance or drivability improvements can I expect?\u003c\/h3\u003e\n\u003cp\u003eReplacing failing coils, plugs and wires can reduce engine misfires, uneven idling and rough running. While exact gains vary with vehicle condition, a full-bank replacement helps restore consistent spark, which supports smoother acceleration and can help stabilize fuel delivery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores consistent spark across all eight cylinders to reduce misfires.\u003c\/li\u003e\n  \u003cli\u003eImproves idle smoothness and responsiveness under load.\u003c\/li\u003e\n  \u003cli\u003eMay assist in stabilizing fuel trim and reducing stumble during acceleration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in this kit and why are the parts matched?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains eight UF262 round ignition coils, eight 41-962 platinum spark plugs, and eight 9748-series spark plug wires. Providing a matched set removes uncertainty from piecemeal replacements and helps ensure components have compatible electrical and thermal characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e8x UF262 round ignition coils (full bank replacement).\u003c\/li\u003e\n  \u003cli\u003e8x 41-962 platinum spark plugs for reliable gap stability and longevity.\u003c\/li\u003e\n  \u003cli\u003e8x 9748-series spark plug wires built with nichrome core for heat resistance and conductivity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these parts durable and backed by support?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT designs this kit using materials chosen for heat resistance and corrosion protection, such as nichrome-core wires with insulation meant for engine bay conditions. The seller offers a one-year product quality support period for customer concerns or warranty issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNichrome core wiring provides improved heat resistance and conductivity.\u003c\/li\u003e\n  \u003cli\u003ePlatinum plugs are chosen for longer service life than standard copper plugs.\u003c\/li\u003e\n  \u003cli\u003eOne-year product quality support included—contact YEHERIT for questions or warranty claims.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This kit is intended for owners and technicians working on GM 4.8L, 5.3L and 6.0L V8 trucks and SUVs who need a complete bank replacement of coils, plugs and wires. It’s ideal for vehicles showing misfires, rough idle, or inconsistent performance and for anyone who prefers replacing the entire ignition bank at once to maintain even component wear and predictable operation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these coils fit if my current coils are square?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — this kit uses ROUND UF262 coils. If your factory coils are square (UF271), this set is not compatible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What warranty or support is included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: YEHERIT provides one-year product quality support; contact the seller for assistance or warranty claims.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67585574338745,"sku":"B0F3GGN5G4","price":282.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-round-coil-front-packaging.jpg?v=1790472218"},{"product_id":"yeherit-blower-motor-w205700800-direct-fit-brushless-hvac-replacement-for-kenworth-peterbilt-2013-2017-quiet-powerful-airflow","title":"YEHERIT Blower Motor W205700800 — Direct-fit Brushless HVAC Replacement for Kenworth\/Peterbilt 2013–2017, Quiet Powerful Airflow","description":"\u003cstrong\u003eYEHERIT W205700800 is a direct-fit, brushless HVAC heater blower motor built to restore strong, quiet airflow for compatible Kenworth and Peterbilt trucks.\u003c\/strong\u003e\n\n\u003cp\u003eIf your cab heater or ventilation feels weak or noisy, replacing the blower motor with a brushless unit like the YEHERIT W205700800 can bring back consistent airflow and improved cabin comfort. This motor is designed as a direct replacement for specific Kenworth T170\/T270\/T370 and Peterbilt 579 model years, matching important OE part numbers so installation is straightforward for technicians and DIY mechanics.\u003c\/p\u003e\n\n\u003ch3\u003eWhich trucks and part numbers does this blower motor fit?\u003c\/h3\u003e\n\u003cp\u003eThis YEHERIT blower motor is made to match the original equipment for a narrow range of model years to ensure compatibility. It fits 2013–2017 Kenworth T170, T270, and T370 chassis and 2013–2017 Peterbilt 579 trucks. The unit corresponds to OE references W205700800, CR705001, and 1504123, which helps when cross-referencing replacement parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKenworth: T170, T270, T370 (2013–2017)\u003c\/li\u003e\n  \u003cli\u003ePeterbilt: 579 (2013–2017)\u003c\/li\u003e\n  \u003cli\u003eOE numbers included: W205700800, CR705001, 1504123\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the brushless design affect performance and longevity?\u003c\/h3\u003e\n\u003cp\u003eBrushless motors run with fewer wearing parts than brushed units, producing steadier airflow and reduced electrical noise over time. The YEHERIT brushless blower is engineered for stable operation, delivering stronger air output and a quieter cabin environment while minimizing routine maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrushless construction reduces friction and wear\u003c\/li\u003e\n  \u003cli\u003eSmoother, more consistent airflow under load\u003c\/li\u003e\n  \u003cli\u003eLower operational noise compared with older brushed motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and initial use?\u003c\/h3\u003e\n\u003cp\u003eThe W205700800 is built for quick, direct installation using the existing mounting points and electrical connections on compatible trucks. Most installations are straightforward for a technician and require no extensive modification; once installed, you should notice immediate improvement in fan strength and quieter operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit replacement for listed models — no custom brackets\u003c\/li\u003e\n  \u003cli\u003eStandard electrical connector compatibility where specified\u003c\/li\u003e\n  \u003cli\u003eImmediate performance improvement after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat quality and after-sales support does YEHERIT provide?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT emphasizes durable materials and component reliability to extend service life under heavy-duty use. The product listing highlights premium build quality and customer support availability, with the brand offering responsive after-sales help for troubleshooting or fitment questions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed from high-quality materials for durability\u003c\/li\u003e\n  \u003cli\u003eEngineered for quieter operation and longer life\u003c\/li\u003e\n  \u003cli\u003eCustomer service committed to replying within 24 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Fleet managers, truck owners, and heavy-duty mechanics who maintain 2013–2017 Kenworth T170\/T270\/T370 and Peterbilt 579 models and need a reliable, low-noise blower motor replacement. Choose the YEHERIT W205700800 if you want a brushless direct-fit unit that matches OE part numbers, improves cabin airflow, and reduces the frequency of service interventions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this blower motor fit my 2015 Peterbilt 579?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The YEHERIT W205700800 is compatible with 2013–2017 Peterbilt 579 models and matches OE references.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the motor plug-and-play or does it need modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It is designed as a direct-fit replacement using existing mounts and connectors for the listed truck models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67585578860729,"sku":"B0DJLVR84M","price":279.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-w205700800-front-view.jpg?v=1790472491"},{"product_id":"yeherit-1-5l-turbocharger-assembly-for-honda-accord-2018-2022-l15bm-l15bn-with-actuator-oe-fit-restores-boost","title":"YEHERIT 1.5L Turbocharger Assembly for Honda Accord 2018-2022 (L15BM\/L15BN) with Actuator — OE Fit, Restores Boost","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT's 1890064AA11 is a complete 1.5L turbocharger assembly with actuator built to replace the factory unit on 2018–2022 Honda Accord 1.5L L4 engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis direct-fit turbocharger assembly is engineered to match OE fitment and restore or improve boost delivery for Honda models using the L15BM\/L15BN 1.5‑liter four‑cylinder engines. Constructed from high‑grade aluminum and iron with precision machining, the assembly includes the actuator and hardware required to mount it in place of the original turbocharger. It lists multiple OEM cross‑reference numbers so you can confirm compatibility with your vehicle before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this turbocharger fits my Accord?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm compatibility by checking the engine code (L15BM or L15BN) and the model year range. This assembly is designed for Accord LX\/EX-L\/Sport (2018–2022), Accord EX (2018–2020), Sport SE (2021–2022), and Accord Touring (2018). Use the supplied OEM part cross‑references to match the part to your vehicle.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits Honda L15BM \/ L15BN 1.5L four‑cylinder engines\u003c\/li\u003e\n  \u003cli\u003eCompatible model years: 2018–2022 depending on trim\u003c\/li\u003e\n  \u003cli\u003eCross‑reference numbers: 1890064A01, 1890064AA11, 189006A0001, 180810528E, 181201132E, and others\u003c\/li\u003e\n  \u003cli\u003eVerify against your current turbo part number for exact match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat improvements or repairs does this assembly address?\u003c\/h3\u003e\n\n\u003cp\u003eThis replacement solves common turbocharger failures such as boost loss, oil leakage, smoke, and increased oil consumption due to worn or damaged components. Because it’s precision‑machined and made from durable materials, the unit aims to restore proper boost response and maintain reliable operation under normal driving conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRestores boost pressure and throttle response\u003c\/li\u003e\n  \u003cli\u003eReplaces leaking or worn housings, seals, and actuator linkages\u003c\/li\u003e\n  \u003cli\u003eReduces smoke and excessive oil consumption caused by failing turbos\u003c\/li\u003e\n  \u003cli\u003eEngineered to match original equipment performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key construction and quality features?\u003c\/h3\u003e\n\n\u003cp\u003eThe turbocharger uses a mix of high‑grade aluminum and iron components with precision machining to ensure tight sealing and consistent performance. An integrated actuator controls vane\/boost operation (as applicable), and fitment follows OE mounting points to simplify installation. The design focuses on abrasion resistance and longevity while matching factory specifications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh‑grade aluminum and iron for durability and heat resistance\u003c\/li\u003e\n  \u003cli\u003ePrecision‑machined housings to prevent leaks and ensure sealing\u003c\/li\u003e\n  \u003cli\u003eIncludes actuator for accurate boost control and response\u003c\/li\u003e\n  \u003cli\u003eOffers an OEM‑style form, fit, and function replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the turbocharger?\u003c\/h3\u003e\n\n\u003cp\u003eYEHERIT provides a one‑year product quality support period, giving you coverage against manufacturing defects. Customer service is available to answer fitment or installation questions, and the seller commits to responding within a stated timeframe for assistance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOne year product quality support from YEHERIT\u003c\/li\u003e\n  \u003cli\u003eCustomer support for fitment and product questions\u003c\/li\u003e\n  \u003cli\u003eResponds to inquiries within 24 hours (as advertised)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This turbocharger assembly is intended for Honda Accord owners and mechanics needing a direct replacement for a failed or failing turbo on L15BM\/L15BN 1.5L four‑cylinder models. It suits drivers who want a factory‑style replacement that restores boost performance and addresses symptoms like loss of power, excessive oil use, or smoke. Always verify fitment by matching your existing turbo's part number or consulting a trusted technician before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this turbocharger include the actuator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the assembly includes the actuator and necessary mounting hardware for direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which OEM part numbers does this replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces several OE numbers including 1890064A01, 1890064AA11, 189006A0001, 180810528E, and 181201132E.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67585603338425,"sku":"B0DT8YSD5H","price":601.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-turbocharger-front-view.jpg?v=1790473864"},{"product_id":"yeherit-radiator-surge-tank-coolant-reservoir-direct-fit-replacement-for-603-009-high-strength-plastic-for-chevy-gmc","title":"YEHERIT Radiator Surge Tank Coolant Reservoir — Direct-Fit Replacement for 603-009, High-Strength Plastic for Chevy\/GMC","description":"\u003cb\u003eYEHERIT Radiator Surge Tank Coolant Reservoir is a direct-fit replacement reservoir designed to restore proper coolant flow and pressure for compatible Chevy and GMC heavy-duty trucks.\u003c\/b\u003e\n\nThis replacement surge tank matches the original equipment shape and mounting points for a straightforward swap, making it a practical repair option when your OE reservoir shows cracks, leaks, or degraded plastic. Built from high-strength plastic and supplied with a secure cap, the unit is engineered to endure under-hood temperatures and daily driving stresses while maintaining correct coolant levels.\n\n\u003ch3\u003eWill this surge tank fit my truck model year and engine?\u003c\/h3\u003e\n\u003cp\u003eYes—this reservoir is specifically designed to replace several OE part numbers and fit a defined group of heavy-duty Chevy and GMC models. Confirm cross-reference numbers and vehicle compatibility before ordering to ensure a precise match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2017–2019 Chevy Silverado \u0026amp; GMC Sierra 2500HD\/3500HD\u003c\/li\u003e\n  \u003cli\u003eFits 2019–2021 Chevy Silverado 4500HD\/5500HD\/6500HD\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers: 84257137, 84214124, 84174037, 84138913, 603-009\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design avoids cutting, drilling, or adapter hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is this replacement reservoir?\u003c\/h3\u003e\n\u003cp\u003eThis surge tank is molded from high-strength plastic formulated to resist heat and vibration typical of heavy-duty truck engine bays. The construction reduces the risk of hairline cracks and coolant seepage that develop with aging factory tanks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength plastic resists thermal cycling and road vibration\u003c\/li\u003e\n  \u003cli\u003eEngineered to maintain pressure and coolant containment\u003c\/li\u003e\n  \u003cli\u003ePre-installed coolant cap included for a complete repair\u003c\/li\u003e\n  \u003cli\u003eManufactured to match OE shape for even stress distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation—do I need special tools?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be simple for anyone comfortable with basic under-hood tasks. Because the unit is an OE-style direct replacement, it mounts to factory locations and connects to existing hoses without modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eQuick bolt-on swap using standard hand tools\u003c\/li\u003e\n  \u003cli\u003eNo cutting or bracket fabrication required\u003c\/li\u003e\n  \u003cli\u003eReconnects to original coolant hoses and sensors as designed\u003c\/li\u003e\n  \u003cli\u003eIncludes cap so you can refill and pressure-check the system immediately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat benefits will I see after replacing the surge tank?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or damaged reservoir restores proper coolant level control and helps the cooling system maintain consistent pressure. That stability can help reduce overheating risk and stops the small leaks or coolant loss that cause recurring top-ups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores proper coolant containment and fill level accuracy\u003c\/li\u003e\n  \u003cli\u003ePrevents slow leaks and coolant evaporation from damaged tanks\u003c\/li\u003e\n  \u003cli\u003eHelps the cooling system operate at designed pressure ranges\u003c\/li\u003e\n  \u003cli\u003eSupports long-term engine protection by maintaining coolant flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for: This YEHERIT surge tank is intended for owners and technicians repairing 2017–2021 heavy-duty Chevy Silverado and GMC Sierra trucks who need a reliable, direct-fit coolant reservoir replacement. It’s suitable for fleet maintenance, roadside repairs, and DIY mechanics wanting an OEM-style replacement that fits without modification and arrives ready to install with a secure cap.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace OE part 84257137?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This YEHERIT unit replaces OE 84257137 and several other listed numbers for direct-fit compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the coolant cap included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The reservoir ships with a pre-installed coolant secure cap for a complete replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67586497904825,"sku":"B0F262BS2T","price":138.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-view-packaging.jpg?v=1790484863"},{"product_id":"yeherit-engine-coolant-expansion-tank-for-bmw-x5-x6-17138621092-with-sensor-cap-heat-resistant-pa","title":"YEHERIT Engine Coolant Expansion Tank for BMW X5\/X6 (17138621092) with Sensor \u0026 Cap, Heat-Resistant PA","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT 17138621092 is a direct-fit engine coolant expansion reservoir with integrated sensor and cap designed to restore proper coolant containment and pressure control on compatible BMW X5\/X6 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement expansion tank is manufactured from heat-resistant PA plastic and includes the coolant level sensor and pressure cap needed to match original equipment performance. It fits a range of BMW E70\/F85\/F15 and E72\/F86\/E71\/F16 vehicles (model years 2007–2019) and carries multiple OE cross-reference numbers so you can confirm fit before purchase. Built to tolerate engine bay heat, road vibration, and frequent temperature cycling, the tank stores excess coolant during operation and returns it to the radiator as the engine cools, helping the cooling system maintain stable pressure.\u003c\/p\u003e\n\n\u003ch3\u003eWill this coolant reservoir fit my BMW X5 or X6?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT 17138621092 is designed to match OEM form and fit for specific BMW X5 and X6 model families produced between 2007 and 2019. Use the OE replacement numbers or your vehicle’s year\/make\/model to verify compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: X5 (E70, F85, F15 series) and X6 (E72, F86, E71, F16 series).\u003c\/li\u003e\n  \u003cli\u003eSupported engine sizes: 2.0L, 3.0L, 4.4L, 4.8L depending on model.\u003c\/li\u003e\n  \u003cli\u003eOE cross-references: 17137552546, 17138621092, 17137647290, 17138630170, 603-361, 603361.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the tank function within the cooling system?\u003c\/h3\u003e\n\u003cp\u003eThis expansion tank collects coolant that expands as the engine warms and releases excess pressure through the cap and return pathways. When the engine cools, the stored coolant flows back into the radiator, helping to maintain the proper coolant level and system pressure without air ingress.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStores overflow coolant during thermal expansion.\u003c\/li\u003e\n  \u003cli\u003eWorks with the pressure cap and sensor to maintain stable cooling-loop pressure.\u003c\/li\u003e\n  \u003cli\u003ePrevents air pockets by allowing coolant to return to the radiator as temperatures drop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and quality features does this replacement offer?\u003c\/h3\u003e\n\u003cp\u003eConstructed from durable PA (polyamide) plastic, the tank resists heat and vibration typical of engine compartments. It includes the coolant-level sensor mounting and a matching pressure cap to ease installation and match OEM functionality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-resistant PA plastic construction for thermal stability.\u003c\/li\u003e\n  \u003cli\u003ePreconfigured sensor port compatible with factory sensors.\u003c\/li\u003e\n  \u003cli\u003eSupplied with a pressure cap engineered to match original specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs there warranty and after-sales support?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT backs this expansion tank with a one-year unlimited-mileage guarantee against manufacturing defects and fitment issues. Customer inquiries are addressed promptly with a 48-hour response window for support and replacement guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-year unlimited-mileage warranty for peace of mind.\u003c\/li\u003e\n  \u003cli\u003e48-hour customer service response for fitment or product questions.\u003c\/li\u003e\n  \u003cli\u003eReturn or replacement handled per warranty terms if defects arise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YEHERIT 17138621092 coolant reservoir is intended for DIY enthusiasts and professional technicians replacing a cracked, leaking, or malfunctioning expansion tank on BMW X5\/X6 models within the stated years. It's especially useful when you need a drop-in OEM-compatible part that includes the sensor interface and correct pressure cap, restoring proper coolant containment and helping the cooling system operate as designed. Always verify fitment with your vehicle identification or OE part numbers before purchase and follow proper coolant handling and disposal practices during installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tank include the coolant level sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tank includes the sensor mounting\/interface; confirm your vehicle’s sensor plug and wiring match for plug-and-play installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What BMW models and years does it fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits BMW X5 and X6 series from 2007–2019 (E70\/F85\/F15 and E72\/F86\/E71\/F16); verify with OE numbers or fitment tool.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67586498035897,"sku":"B0DSFY14GC","price":124.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-coolant-reservoir-front-view.jpg?v=1790484864"},{"product_id":"yeherit-intake-camshaft-right-side-for-3-6l-v6-direct-fit-oe-equivalent-replacement","title":"YEHERIT Intake Camshaft Right Side for 3.6L V6 — Direct-Fit OE-Equivalent Replacement","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT 5184380AG is a right-side intake camshaft engineered as a direct-fit replacement for 3.6L V6 engines found in many Chrysler, Dodge, Jeep and Ram models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis camshaft is manufactured to replace worn or damaged right-side intake camshafts with OE-equivalent dimensions and mounting surfaces. It is designed to meet factory fitment numbers (including 5184380AG and related superseded references) so you can reinstall it without extensive modifications. Whether you are repairing a vehicle after mechanical wear or performing scheduled maintenance, this camshaft aims to restore timing component integrity and help maintain consistent valve motion for the intake side of the engine.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does this camshaft fit?\u003c\/h3\u003e\n\u003cp\u003eThis part is compatible with a wide range of Chrysler, Dodge, Jeep and Ram vehicles fitted with the 3.6L V6 engine across several model years. Always verify compatibility by comparing the part number and vehicle specifications before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrysler: 200 (2011–2017), 300 (2011–2023), Town \u0026amp; Country (2011–2016)\u003c\/li\u003e\n  \u003cli\u003eJeep: Grand Cherokee (2011–2015), Wrangler (2012–2017), Wrangler JK (2018)\u003c\/li\u003e\n  \u003cli\u003eDodge: Journey (2011–2019), Grand Caravan (2011–2020), Durango (2011–2015), Charger \u0026amp; Challenger (2011–2023), Avenger (2011–2014)\u003c\/li\u003e\n  \u003cli\u003eRam: 1500 (2013–2018), ProMaster 1500\/2500\/3500 (2014–2021), Ram 1500 Classic (2019–2023), C\/V models (various years)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key specs and replacement numbers I should check?\u003c\/h3\u003e\n\u003cp\u003eThe camshaft is supplied to match OEM geometries and the common replacement references used by service providers. Reviewing the OE numbers ensures you order the correct right-side intake camshaft for your engine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrimary replacement OEM number: 5184380AG\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with related references: 5184380AD, 5184380AE, 5184380AF, 5184380AH\u003c\/li\u003e\n  \u003cli\u003eMade to fit 3.6L V6 engine variants where these OE numbers are specified\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this camshaft affect engine performance and drivability?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn intake camshaft restores accurate valve timing and intake lift profiles, which helps the engine run more smoothly and predictably. While not a performance upgrade, a properly functioning camshaft reduces irregular valve motion that can cause vibration, noise, or uneven idling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores consistent intake valve operation and timing\u003c\/li\u003e\n  \u003cli\u003eHelps reduce noise and roughness attributed to worn cam lobes\u003c\/li\u003e\n  \u003cli\u003eDesigned for long service life using higher-grade material construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect when installing this camshaft?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires standard engine timing procedures and alignment with the vehicle’s timing chain or belt system; some applications need removal of timing covers and related components. Have a factory service manual or professional mechanic confirm torque specs and timing alignment to avoid engine damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect mating parts (lifters, rockers, timing components) during service\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer torque and timing procedures for reassembly\u003c\/li\u003e\n  \u003cli\u003eBox labeling may vary; verify the part inside matches 5184380AG before installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This YEHERIT right-side intake camshaft is intended for mechanics, professional repair shops, and knowledgeable DIYers maintaining or restoring Chrysler, Dodge, Jeep and Ram vehicles powered by the 3.6L V6. It suits owners seeking a cost-effective, OE-referenced replacement part to restore valve timing accuracy and reduce drivability issues associated with a worn intake camshaft. If you need certainty on compatibility, cross-check the OE numbers listed above against your vehicle’s service documentation before purchase.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this camshaft a direct OEM replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It matches OE reference numbers like 5184380AG and compatible superseded codes for direct-fit replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which engines and models use this part?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for 3.6L V6 engines in select Chrysler, Dodge, Jeep and Ram models listed in the product fitment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67586598043833,"sku":"B0DNS3J5SP","price":165.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-right-side-intake-camshaft-front-view.jpg?v=1790487872"},{"product_id":"yeherit-coolant-hose-pcv-pipe-kit-for-chevy-cruze-1-4l-6-piece-oe-style-heat-resistant-replacement","title":"YEHERIT Coolant Hose \u0026 PCV Pipe Kit for Chevy Cruze 1.4L (6-Piece) — OE-Style, Heat-Resistant Replacement","description":"\u003cp\u003e\u003cstrong\u003eComplete six-piece coolant hose and PCV tubing kit engineered to replace worn radiator, heater, and oil cooler hoses on 2011–2014 Chevy Cruze 1.4L engines.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis YEHERIT hose set groups the main coolant circulation lines, a heater outlet hose, PCV tubing, and the engine oil cooler inlet into a single replacement kit designed for Cruze Eco, LT and LTZ models with the 1.4L L4 engine. The bundle matches OE-style connections and part numbers listed by many repair guides so you can swap multiple aging hoses in one service visit. Constructed from heat- and chemical-resistant materials, the kit aims to restore coolant routing reliability and reduce the chance of leaks that can cause overheating or poor heater performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich hoses are included and which OE part numbers do they replace?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains six distinct hoses to cover primary coolant and PCV routing points. Each hose is offered as a direct-style replacement for the associated OE numbers commonly cited for the 1.4L Cruze.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCoolant bypass hose — replaces OE 13251447, 13408385\u003c\/li\u003e\n  \u003cli\u003eRadiator outlet hose — replaces OE 13251435\u003c\/li\u003e\n  \u003cli\u003eRadiator inlet hose — replaces OE 13291779, 1337847, 95031564, 95181632\u003c\/li\u003e\n  \u003cli\u003eHeater outlet hose — replaces OE 94543097\u003c\/li\u003e\n  \u003cli\u003ePCV valve tubing hose — replaces OE 25193343, 55568267\u003c\/li\u003e\n  \u003cli\u003eEngine oil cooler coolant inlet hose — replaces OE 55596898\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will these hoses affect engine cooling and heater performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing brittle, swollen, or split hoses restores correct coolant flow paths, reducing the risk of leaks and helping the cooling system maintain proper temperature balance. The heater outlet hose ensures hot coolant reaches the heater core so cabin heating works as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores sealed coolant circuits to prevent pressure loss and fluid leaks\u003c\/li\u003e\n  \u003cli\u003eSupports consistent flow to radiator and heater core for stable engine temps\u003c\/li\u003e\n  \u003cli\u003ePCV tubing replacement aids crankcase ventilation performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does the kit offer?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT constructs the hoses from heat- and chemical-resistant elastomers formulated for automotive coolant and oil-exposed service. The materials are chosen to resist aging, abrasion, and common coolant additives so the replacement parts last longer than neglected factory hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature elastomer resists softening and swelling\u003c\/li\u003e\n  \u003cli\u003eCorrosion- and wear-resistant design for longer service life\u003c\/li\u003e\n  \u003cli\u003eFactory-style fittings and bends for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this kit an easy DIY swap or should I see a mechanic?\u003c\/h3\u003e\n\u003cp\u003eMany home mechanics with basic tools and a repair manual can replace these hoses during a scheduled coolant service, but expect to drain the cooling system and follow bleed procedures. If clamps, connectors, or nearby components restrict access, a professional installation reduces risk of installation errors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires coolant drain and system bleed to avoid air pockets\u003c\/li\u003e\n  \u003cli\u003eClamps and routing should match original locations to prevent rubbing\u003c\/li\u003e\n  \u003cli\u003eProfessional help recommended if unsure about coolant system procedures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: This six-piece YEHERIT hose kit is aimed at owners and independent shops servicing Chevy Cruze Eco, LT, and LTZ models with the 1.4L L4 engine from 2011–2014 who want a coordinated set of OE-compatible replacement hoses. It fits drivers replacing multiple cooling lines at once, technicians preparing for a coolant system overhaul, or anyone addressing leaks, age-related hose failure, or insufficient heater performance. YEHERIT offers one year of product quality support and customer assistance to answer fitment or installation questions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2012 Chevy Cruze 1.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this kit is made for 2011–2014 Chevy Cruze 1.4L Eco\/LT\/LTZ models; verify part numbers and engine configuration before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace all hoses at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Not required, but replacing multiple aging hoses together prevents near-future failures and reduces labor by combining service steps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67586699591865,"sku":"B0D9H2Z53Y","price":125.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-packaging-chevy-cruze-hose-kit.jpg?v=1790490382"},{"product_id":"yeherit-engine-transmission-mount-kit-set-of-4-fits-2003-2008-corolla-matrix-vibe-1-8l-oe-fit","title":"YEHERIT Engine \u0026 Transmission Mount Kit, Set of 4 — Fits 2003–2008 Corolla\/Matrix\/Vibe 1.8L, OE Fit","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT's Set of 4 Engine Motor Mount and Transmission Mount Kit replaces worn mounts to cut vibration, stabilize the drivetrain, and restore smooth operation for compatible 2003–2008 Toyota Corolla, Matrix, and Pontiac Vibe models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen engine mounts age they transmit engine movement and noise into the cabin, accelerate wear on drivetrain parts, and make shifting feel harsh. This complete 4-piece kit from YEHERIT includes the primary engine mounts and the transmission mount designed to match the factory fit and key OE references for a direct replacement. Each mount combines metal and reinforced rubber to absorb torque and dampen vibration while keeping alignment close to original specifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these mounts affect daily driving?\u003c\/h3\u003e\n\u003cp\u003eReplacing failed or soft mounts reduces engine tilt and movement under acceleration, which lowers vibration in the cabin and improves throttle and shift feel. You'll notice less engine noise, crisper gear engagement, and reduced stress on exhaust and intake connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces vibration transmitted to the cabin\u003c\/li\u003e\n  \u003cli\u003eStabilizes engine during acceleration and deceleration\u003c\/li\u003e\n  \u003cli\u003eMinimizes strain on related hoses and brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these mounts compatible with my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThis kit is specified for 2003–2008 Toyota Corolla 1.8L, 2003–2008 Toyota Matrix 1.8L, and 2003–2008 Pontiac Vibe 1.8L. The set covers the main engine mount locations and the transmission mount, matching a list of common OE part numbers for straightforward swapping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Corolla, Matrix, and Vibe 1.8L (2003–2008)\u003c\/li\u003e\n  \u003cli\u003eDesigned to align with listed OE part numbers for direct fit\u003c\/li\u003e\n  \u003cli\u003eIncludes both engine and transmission mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and build features improve durability?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT mounts are made from a metal-and-high-strength rubber composite engineered to resist oil and heat-related degradation. The rubber formulation and reinforced bonding help maintain damping performance over time while metal components preserve mounting geometry and torque reaction control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength rubber for effective vibration absorption\u003c\/li\u003e\n  \u003cli\u003eMetal reinforcements preserve alignment and torque resistance\u003c\/li\u003e\n  \u003cli\u003ePrecision manufacturing to fit factory mounting bosses\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows the same mounting points as the factory components and typically requires basic hand tools, a jack or lift, and standard mechanical experience. Swapping mounts one-by-one prevents drivetrain collapse; tighten to OEM torque specs and verify alignment before lowering the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement design for bolt-on installation\u003c\/li\u003e\n  \u003cli\u003eRecommended: standard tools, jack\/stands, and torque wrench\u003c\/li\u003e\n  \u003cli\u003eFollow OEM torque values and inspect related hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YEHERIT four-piece mount kit is aimed at owners and technicians maintaining 2003–2008 Corolla, Matrix, and Vibe vehicles who want a reliable, value-minded replacement for worn engine and transmission mounts. It’s suited for routine restoration of ride comfort, drivetrain stability, and to prevent secondary damage to exhaust, intake, and linkage components.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment references included:\u003c\/strong\u003e 123050D023, 88973356, A4220, EM9155, 9155, 123710D110, A4219, EM9158, 9158, 88974794, 123710D120, A4218, EM9164, 9164, 1236122030, 1236122040, A4221, EM9163, 9163, 123050D022, 88969075, 123720D100, 123720D110, 88969089, 88969090\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKey benefits:\u003c\/strong\u003e improved driving stability, reduced vibration, even engine load distribution, and extended component life when installed correctly\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupport:\u003c\/strong\u003e backed by YEHERIT customer service for fitment or post-purchase assistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit a 2005 Toyota Corolla 1.8L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit is compatible with 2003–2008 Toyota Corolla 1.8L models and includes the primary engine and transmission mounts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these mounts myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A mechanically inclined DIYer can install them with standard tools and a jack; follow OEM torque specs and safety procedures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67586705850553,"sku":"B0D95BFP13","price":140.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-packaging-kit.jpg?v=1790490798"},{"product_id":"yeherit-front-wheel-hub-bearing-assembly-pair-513296-5-lug-32-spline-pre-assembled-fits-nissan-infiniti","title":"YEHERIT Front Wheel Hub Bearing Assembly Pair 513296 – 5-Lug 32-Spline, Pre-Assembled (Fits Nissan\/Infiniti)","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT 513296 is a pair of pre-assembled front wheel hub and bearing units designed to replace worn assemblies on compatible Nissan and Infiniti models, restoring smooth wheel rotation and secure 5-lug mounting.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle shows wheel vibration, unusual noise from the front end, or uneven tire wear, replacing the hub and bearing assembly can bring back stable steering and quieter operation. These two front units come fully integrated (hub, bearing and mounting flange) so you avoid separate pressing or bearing-press tools. They match OE-style fitment for several Nissan and Infiniti vehicles — check fitment before ordering to ensure compatibility with your model year.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these hub assemblies fit?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT 513296 pair is engineered for specific Nissan and Infiniti model years and trims that use a 5-lug front hub with a 32-spline axle. It’s critical to confirm your vehicle’s part number or compare against the application list before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Nissan models: Altima (2007–2018), Maxima (2009–2023), Murano (2015–2018), Pathfinder (2013–2020).\u003c\/li\u003e\n  \u003cli\u003eCompatible Infiniti models: JX35 (2013), QX50 (2019–2021), QX60 (2014–2020).\u003c\/li\u003e\n  \u003cli\u003eReplaceable OE part numbers include 513296, 40202-3JA1A, 402023JA1A, 40202JA100.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow are these assemblies built to last and reduce maintenance?\u003c\/h3\u003e\n\u003cp\u003eThese units use a robust bearing construction and a reinforced sealing system to withstand axial and radial forces encountered in daily driving. The seals are pre-lubricated and engineered to limit contaminant ingress, which helps extend service life and minimize noise.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength bearing elements resist heavy loads and rough roads.\u003c\/li\u003e\n  \u003cli\u003eDual-sealed, pre-lubricated design reduces wear and prevents contaminant entry.\u003c\/li\u003e\n  \u003cli\u003eNoise and vibration reduction through durable bearing components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the integrated assembly mean for installation?\u003c\/h3\u003e\n\u003cp\u003eEach unit arrives fully assembled, so you won’t need hydraulic presses or specialized bearing tools to fit them. That simplifies both professional shop replacements and DIY jobs, lowers labor time, and reduces installation risk when following proper procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHub, bearing and flange pre-assembled for quick swap-in replacement.\u003c\/li\u003e\n  \u003cli\u003eNo pressing required — saves time and reduces equipment needs.\u003c\/li\u003e\n  \u003cli\u003eSuitable for both mechanic shops and competent DIY installers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat key specifications should I verify for compatibility?\u003c\/h3\u003e\n\u003cp\u003eBefore ordering, validate the spline count, bolt pattern, and sensor requirements for your vehicle. These hub assemblies are designed for 5-lug wheels, four flange bolt holes, and a 32-spline axle; they do not include a speed sensor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpline quantity: 32 splines — confirm with your axle shaft.\u003c\/li\u003e\n  \u003cli\u003eWheel lug pattern: 5 lug holes; Flange bolt holes: 4.\u003c\/li\u003e\n  \u003cli\u003eSpeed sensor: not included — ensure your vehicle’s ABS sensor is compatible or retained.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These YEHERIT 513296 front hub and bearing assemblies are intended for owners and technicians replacing failing or noisy front hubs on the listed Nissan and Infiniti models who want an OE-style, pre-assembled solution. They are especially useful for drivers seeking a straightforward swap without bearing-press equipment, shops that need reliable aftermarket replacements, and DIYers comfortable with front-end removal and reinstallation. Always verify vehicle fitment and inspect surrounding steering and suspension components when replacing hub assemblies.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this assembly include the ABS speed sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The YEHERIT 513296 hubs do not include a speed sensor; confirm your vehicle’s sensor setup before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these hubs without a bearing press?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. These units arrive pre-assembled, eliminating the need for a bearing press for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67586709389497,"sku":"B0F488QXVV","price":192.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-hub-assembly-front-view.jpg?v=1790490916"},{"product_id":"yeherit-engine-motor-mount-set-for-honda-civic-2006-2011-1-8l-automatic-oe-fit-vibration-dampening","title":"YEHERIT Engine Motor Mount Set for Honda Civic 2006–2011 1.8L (Automatic) — OE Fit, Vibration Dampening","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT Engine Motor Mount Set A4530 A4534 A4546 A4543 fits Honda Civic 2006–2011 (1.8L L4) with automatic transmission, providing quieter operation and improved stability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis motor mount kit replaces worn factory mounts—OE references include A4530, A4534, A4543, A4546 and common cross-references such as 50820SNA033 and EM9280. Each mount is engineered from reinforced rubber bonded to metal to damp vibrations, redistribute engine loads, and restore proper drivetrain alignment. Whether you’re repairing a daily commuter or refreshing a project car, the set is designed to match the original equipment fit while offering robust durability.\u003c\/p\u003e\n\n\u003ch3\u003eWhy would replacing these mounts matter to my Honda Civic?\u003c\/h3\u003e\n\u003cp\u003eOld or damaged mounts allow excess engine movement that leads to louder cabin noise, shuddering during acceleration, and stress on drivetrain parts. Replacing with a matched set brings the engine back to its factory position and reduces transmitted vibration to the chassis. That stabilizes shifting, improves throttle feel, and can prevent premature wear on hoses and brackets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores factory alignment and engine positioning\u003c\/li\u003e\n  \u003cli\u003eReduces cabin noise and vibration on acceleration\u003c\/li\u003e\n  \u003cli\u003ePrevents secondary wear to belts, hoses, and transmission mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this set built and how does it perform?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT motor mounts combine high-strength rubber compounds with stamped metal housings to balance flexibility and load-bearing capability. The rubber isolates vibration while the metal components resist shear and maintain mounting geometry under torque. The result is predictable damping across idle, acceleration, and deceleration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced rubber for long-lasting vibration control\u003c\/li\u003e\n  \u003cli\u003eDurable metal construction preserves mounting alignment\u003c\/li\u003e\n  \u003cli\u003eOE cross-reference numbers for accurate fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this set replace?\u003c\/h3\u003e\n\u003cp\u003eThis kit is targeted for Honda Civic 2006–2011 L4 1.8L Coupe and Sedan models equipped with an automatic transmission. It covers the common OE part numbers used by manufacturers and aftermarket suppliers, helping ensure a direct-fit replacement without modification. Check your VIN or existing part numbers to confirm match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Civic 2006–2011 L4 1.8L (automatic transmission)\u003c\/li\u003e\n  \u003cli\u003eOE references include A4530, A4534, A4543, A4546 and EM\/508xx cross numbers\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct-fit installation using factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows factory mounting locations and typically requires basic tools and safe engine support. Expect to torque fasteners to manufacturer specifications and verify engine alignment after installation. Regular inspections for rubber degradation and metal corrosion will prolong service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires engine support during removal of old mounts\u003c\/li\u003e\n  \u003cli\u003eTorque to OEM specifications for safety and longevity\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for cracks, oil contamination, or corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YEHERIT Engine Motor Mount Set is suited for DIYers restoring ride quality, independent mechanics replacing worn drivetrain components, and owners of 2006–2011 Honda Civic L4 1.8L automatics seeking a reliable, direct-fit replacement. It’s ideal when you want OE cross-reference compatibility, improved vibration isolation, and parts backed by a one-year quality support promise.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2008 Honda Civic 1.8L automatic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This YEHERIT set is designed for 2006–2011 Honda Civic L4 1.8L models with an automatic transmission.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include all necessary mounts for a complete replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The set covers the primary engine\/transmission mounts indicated by OE numbers A4530\/A4534\/A4543\/A4546 for direct replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67586773516473,"sku":"B0DDT6DG3M","price":156.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-motor-mounts-packaging-front.jpg?v=1790492797"},{"product_id":"yeherit-rv-water-heater-ignition-control-board-2026-upgraded-12v-direct-fit-replacement-for-atwood-dometic","title":"YEHERIT RV Water Heater Ignition Control Board 2026 Upgraded 12V Direct-Fit Replacement for Atwood Dometic","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT's 2026 upgraded 91365 ignition control circuit board replaces worn control modules in many Atwood and Dometic gas-electric RV water heaters to restore reliable 12V ignition and control functions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your RV's gas-electric water heater has intermittent ignition, won't light, or shows erratic control behavior, a failed control board is a common culprit. This replacement board is built to meet or exceed OEM specifications and is compatible with a wide range of Atwood and Dometic models (GC6, GC10, GCH6, GCH10, GH6, GH10 and many EXT\/GEN variants). The unit ships as a direct-fit circuit board meant for straightforward installation so you can get back to hot water on the road without custom wiring or extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this control board fix my RV water heater?\u003c\/h3\u003e\n\u003cp\u003eReplacing a faulty ignition control board restores the electronics that manage gas valve operation, ignition sequencing, and safety interlocks. Once installed, the board re-enables the heater’s 12V ignition cycle and control signals for normal operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores 12V ignition and pilot control for gas-electric heaters\u003c\/li\u003e\n  \u003cli\u003eReplaces common failing part numbers 91365, 91346, 91226, 93305, 93851\u003c\/li\u003e\n  \u003cli\u003eResolves intermittent ignition and erratic cycling problems\u003c\/li\u003e\n  \u003cli\u003eMaintains original wiring harness locations for a direct swap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Atwood and Dometic models does this board fit?\u003c\/h3\u003e\n\u003cp\u003eThis YEHERIT board supports an extensive list of factory models across the GC, GCH, GH and G series plus many EXT variants. Verify your heater’s model and part number before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits GC6A\/GC6AA\/GC10A and GCH6\/GCH10 families (multiple E-series revisions)\u003c\/li\u003e\n  \u003cli\u003eCompatible with G10, GH6, GH10, G9-EXT, GE9-EXT, G16-EXT, GE16-EXT, GEH16-EXT\u003c\/li\u003e\n  \u003cli\u003eDirectly replaces 91365, 91346, 91226, 93305, 93851 part numbers\u003c\/li\u003e\n  \u003cli\u003eDesigned to match OEM terminal layouts for straightforward replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build and performance features of the upgraded board?\u003c\/h3\u003e\n\u003cp\u003eThe 2026 YEHERIT board is manufactured under OEM standards using durable components to handle RV vibration and temperature variation. Its construction emphasizes longevity while keeping the same electrical behavior as the original control module.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt to OEM-level specifications for reliable electrical performance\u003c\/li\u003e\n  \u003cli\u003eHigh-quality components to resist shock and thermal stress during travel\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play form factor—no additional parts or modifications required\u003c\/li\u003e\n  \u003cli\u003eDesigned for both gas-only and gas-electric heater configurations where applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check before replacing it?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be a direct replacement: unmount the old board, transfer any brackets or connectors, and secure the new board in the same location. Always disconnect 12V power and turn off gas before working on the heater, and inspect connectors and wiring for damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePower off vehicle 12V and shut off gas supply before starting\u003c\/li\u003e\n  \u003cli\u003eCompare connector positions and screw holes to confirm match\u003c\/li\u003e\n  \u003cli\u003eUse basic hand tools; no special equipment required\u003c\/li\u003e\n  \u003cli\u003eTest ignition cycle after installation and check for error codes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The YEHERIT 2026 upgraded 91365 ignition control board is for RV owners, mobile technicians, and fleet maintainers who need a dependable, OEM-compatible replacement for Atwood and Dometic gas-electric water heaters. It suits anyone looking to fix ignition failures, eliminate erratic cycling, or replace aging electronics with a durable direct-fit board that restores normal heater function without complex wiring changes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this board fit my Atwood GC10A model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this YEHERIT board lists compatibility with GC10A series variants but verify your heater’s model and part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the replacement board?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required; use basic hand tools, disconnect 12V and gas, then swap the board in place.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67587170992313,"sku":"B0D93ZDGWG","price":104.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-view-control-board.jpg?v=1790501236"},{"product_id":"yeherit-coolant-expansion-reservoir-tank-603-973-with-cap-direct-fit-for-gm-2014-2020-pa-plastic","title":"YEHERIT Coolant Expansion Reservoir Tank 603-973 with Cap — Direct-Fit for GM 2014–2020, PA Plastic","description":"\u003cstrong\u003eYEHERIT 603-973 coolant expansion reservoir tank with cap is a direct-fit replacement coolant overflow tank engineered for select Cadillac, Chevrolet and GMC 2014–2020 V6\/V8 models.\u003c\/strong\u003e\n\n\u003cp\u003eThis replacement expansion tank restores the cooling system’s fluid reserve and pressure management when your original tank is cracked, leaking, or the cap fails. Molded from heat- and vibration-resistant PA plastic, the tank accepts OE-equivalent mounting points and hose locations so installation is straightforward for most DIYers and professional technicians. It ships with a matching cap and is backed by a one-year unlimited-mileage guarantee.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this reservoir tank fit?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT 603-973 tank matches factory fitment for a range of GM full-size trucks and SUVs from model years 2014 through 2020. Confirm fitment against your vehicle’s year, engine size and original equipment number before purchase to ensure correct compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCadillac: Escalade\/Escalade ESV 2015–2020 6.2L\u003c\/li\u003e\n  \u003cli\u003eChevrolet: Silverado 1500 (2014–2019 4.3L\/5.3L), Silverado 1500 LD 2019 5.3L; Suburban (2015–2020 5.3L\/6.0L\/6.2L), Suburban 3500 HD (2016–2019 6.0L); Tahoe (2015–2020 5.3L\/6.2L)\u003c\/li\u003e\n  \u003cli\u003eGMC: Sierra 1500 (2015–2019 4.3L\/5.3L\/6.2L), Sierra 1500 Limited 2019 5.3L; Yukon\/Yukon XL (2015–2020\/2015–2019 5.3L\/6.2L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the YEHERIT tank work in the cooling system?\u003c\/h3\u003e\n\u003cp\u003eThe expansion tank stores excess coolant pushed from the radiator as engine temperature rises, helping the system relieve pressure and prevent overflow. When the engine cools, coolant returns from the reservoir to the radiator, maintaining proper fluid levels and circulation without manual topping in normal operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccepts expanding coolant to reduce radiator overpressure\u003c\/li\u003e\n  \u003cli\u003eReturns fluid back into the cooling circuit as temperatures drop\u003c\/li\u003e\n  \u003cli\u003eMolded inlet\/outlet locations match OE routing for easy hose reconnection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction and durability features?\u003c\/h3\u003e\n\u003cp\u003eThis tank is manufactured from reinforced PA (polyamide) plastic chosen for high-heat and chemical resistance. The material and cap design aim to resist cracking and swelling from thermal cycling and engine bay vibration, offering long service life when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat- and vibration-resistant polyamide construction\u003c\/li\u003e\n  \u003cli\u003eOE-style cap included for proper pressure control\u003c\/li\u003e\n  \u003cli\u003eFactory-matched mounting points and hose fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich OE numbers and warranty details should I check?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT provides the 603-973 expansion tank as a replacement for several original equipment part numbers. The product comes with a one-year unlimited-mileage guarantee and responsive after-sales support for installation questions or warranty claims.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon replacement OE numbers: 603-973, 22856231, 671-00359, 603973, 3014134, 67100359\u003c\/li\u003e\n  \u003cli\u003eOne-year unlimited-mileage guarantee from YEHERIT\u003c\/li\u003e\n  \u003cli\u003eCustomer support response target: within 48 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YEHERIT expansion reservoir is aimed at owners and mechanics of compatible Cadillac, Chevrolet and GMC trucks and SUVs who need a reliable, OE-style replacement tank. Choose this tank if your vehicle shows coolant loss, visible reservoir damage, or a failed cap, and you want a direct-fit, serviceable part that restores the cooling system’s reserve and pressure management.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this tank fit my 2016 Chevy Tahoe 5.3L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the YEHERIT 603-973 is listed for 2015–2020 Tahoe models with 5.3L and 6.2L engines; verify OE numbers or compare mounting points before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the tank include the cap and any warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the unit ships with an OE-style cap and includes a one-year unlimited-mileage guarantee with customer support within 48 hours.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67587235643577,"sku":"B0DSFZPNBB","price":115.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-expansion-tank-front-view.jpg?v=1790502150"},{"product_id":"yeherit-adjustable-efi-fuel-pressure-regulator-kit-30-70-psi-6an-fittings-ptfe-braided-hose","title":"YEHERIT Adjustable EFI Fuel Pressure Regulator Kit — 30–70 PSI, 6AN Fittings \u0026 PTFE Braided Hose","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT Adjustable EFI Fuel Pressure Regulator Kit is a universal, tunable fuel pressure regulator supplying precise 30–70 PSI control with 6AN fittings and PTFE braided hose for reliable EFI performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit is built for street and performance fuel systems that require consistent, adjustable pressure across a range of fuel types. The regulator’s wide 30–70 PSI adjustment range and bypass return design stabilize fuel delivery under varying loads, while the 6AN fittings and PTFE braided hose help prevent leaks and resist chemical wear. It supports gasoline, E85, ethanol, and methanol, making it suitable for many aftermarket EFI setups (not for diesel).\u003c\/p\u003e\n\n\u003ch3\u003eHow does this regulator improve fuel system stability?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT regulator keeps fuel pressure steady by diverting excess fuel back to the tank through its bypass return design, reducing pressure spikes and fuel starvation during throttle changes. Stable pressure helps deliver consistent injector flow and smooth engine response without complicated plumbing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjustable range from 30 to 70 PSI for fine-tuning\u003c\/li\u003e\n  \u003cli\u003eBypass return maintains consistent system pressure\u003c\/li\u003e\n  \u003cli\u003eReduces injector flow variation during acceleration\u003c\/li\u003e\n  \u003cli\u003eSimple mechanical design for reliable operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this work with my fuel type and engine setup?\u003c\/h3\u003e\n\u003cp\u003eThe regulator is compatible with gasoline and popular alcohol blends such as E85, ethanol, and methanol, making it adaptable for many performance and street applications. It is not rated for diesel use, and compatibility should be confirmed for exotic fuels or systems with specialized returnless designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with gasoline, E85, ethanol, methanol\u003c\/li\u003e\n  \u003cli\u003eNot suitable for diesel engines\u003c\/li\u003e\n  \u003cli\u003eDesigned for return-style EFI systems or setups with a return line\u003c\/li\u003e\n  \u003cli\u003eUniversal fit with 6AN fittings for common aftermarket plumbing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and leak-resistant is the kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses 6AN fittings paired with a PTFE braided hose for chemical resistance and long-term durability; PTFE resists most fuels and additives, while 6AN fittings provide a secure, widely used connection standard. Proper installation and torque of fittings ensure a leak-free system even under high pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6AN fittings for secure, industry-standard connections\u003c\/li\u003e\n  \u003cli\u003ePTFE braided hose resists fuel degradation and swelling\u003c\/li\u003e\n  \u003cli\u003eConstructed for repeated adjustment without loss of integrity\u003c\/li\u003e\n  \u003cli\u003eCustomer support and one-year product quality coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat adjustments or maintenance should I expect?\u003c\/h3\u003e\n\u003cp\u003eSetting the pressure is straightforward—use a calibrated gauge at the rail and tune between 30–70 PSI according to your engine and injector specifications. Periodic inspections of hose fittings and mounting hardware are recommended; replace the hose if you notice cracking, leaks, or chemical attack.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSet pressure with a fuel pressure gauge at the rail\u003c\/li\u003e\n  \u003cli\u003eAdjust within 30–70 PSI range to match injectors and fuel map\u003c\/li\u003e\n  \u003cli\u003eInspect fittings and hose periodically for wear or leaks\u003c\/li\u003e\n  \u003cli\u003eContact YEHERIT support within one year for product issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YEHERIT Adjustable EFI Fuel Pressure Regulator Kit is aimed at DIY tuners, performance enthusiasts, and professional installers upgrading or maintaining return-style EFI systems. It’s particularly useful for vehicles running upgraded fuel pumps or alternative fuels like E85, where precise pressure control and durable plumbing matter. If you need a universal, adjustable regulator with robust fittings and a corrosion-resistant hose for aftermarket EFI tuning, this kit is engineered to meet those demands.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure range can I set with this regulator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Adjustable between 30 and 70 PSI to suit a wide variety of EFI setups and injector flow rates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this regulator compatible with diesel fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The YEHERIT kit supports gasoline, E85, ethanol, and methanol but is not suitable for diesel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67587276374201,"sku":"B0DLB8XJ4J","price":113.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-regulator-front-view.jpg?v=1790503810"},{"product_id":"yeherit-adjustable-carburetor-fuel-pressure-regulator-kit-1-5-psi-with-0-15-psi-gauge-and-adapters","title":"YEHERIT Adjustable Carburetor Fuel Pressure Regulator Kit 1–5 PSI with 0–15 PSI Gauge and Adapters","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT's Universal Adjustable Carb Fuel Pressure Regulator Kit lets you set and hold carburetor fuel pressure between 1 and 5 PSI for steadier idling and smoother throttle response.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit supplies a compact regulator, a 0–15 PSI pressure gauge, a fuel block and two common adapters so you can quickly fit most carbureted engines—cars, motorcycles, ATVs, boats and small engines. The regulator’s fine adjustment and included gauge make it simple to dial in the exact fuel pressure your carburetor needs, while the solid construction resists fuel exposure and routine vibration.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the adjustable regulator improve carburetor performance?\u003c\/h3\u003e\n\n\u003cp\u003eConsistent, correct fuel pressure helps the carburetor meter fuel accurately across operating ranges. By limiting pressure to the 1–5 PSI window, the regulator reduces flooding and lean spikes that cause rough idle, bogging or inconsistent acceleration.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrecise range: adjustable 1–5 PSI to match most carburetor requirements\u003c\/li\u003e\n  \u003cli\u003eReal-time check: included 0–15 PSI gauge for instant verification\u003c\/li\u003e\n  \u003cli\u003eStable delivery: prevents pressure surges from pumps or altitude changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how easy is installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit arrives with everything needed for a straightforward retrofit: the regulator, a fuel distribution block, and both 8mm and 10mm adapters to fit common fuel line sizes. Installation is typically a simple insertion into the fuel line near the carburetor or inline between pump and carb, with no specialized tools required for basic setups.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eComplete kit: regulator, fuel block, 0–15 PSI gauge, 8mm \u0026amp; 10mm adapters\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play fit: adapters cover most standard fuel hoses\u003c\/li\u003e\n  \u003cli\u003eMounting options: clamp or bracket attachment for secure placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I set and monitor the fuel pressure correctly?\u003c\/h3\u003e\n\n\u003cp\u003eStart with the regulator turned toward its lowest setting, then run the engine and slowly increase pressure until the carburetor performs smoothly at idle and during throttle response. Use the included 0–15 PSI gauge to confirm the regulator reads within the desired 1–5 PSI window under operating conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInitial setup: start low, increase until stable idle and no bog\u003c\/li\u003e\n  \u003cli\u003eLive tuning: gauge shows actual system pressure during load changes\u003c\/li\u003e\n  \u003cli\u003eFine adjustments: small turns yield small pressure changes for precise calibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the build quality reliable for long-term use?\u003c\/h3\u003e\n\n\u003cp\u003eYEHERIT engineered the regulator components with fuel-resistant materials and a robust construction to withstand vibration, heat and exposure to common fuels. The quality components minimize leaks and keep pressure control consistent over time, making it suitable for regular use in demanding environments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDurable materials: resistant to fuel and wear\u003c\/li\u003e\n  \u003cli\u003eLeak-conscious design: sealed fittings and secure adapters\u003c\/li\u003e\n  \u003cli\u003eGauge accuracy: 0–15 PSI dial for precise monitoring and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: motorists and hobbyists with carbureted engines who want consistent fuel delivery—classic car restorers, vintage motorcycle owners, marine enthusiasts, and small-engine users. If you need precise fuel pressure control to tune performance, prevent flooding or stabilize engine response across conditions, this YEHERIT kit supplies the parts and gauge to set, monitor and maintain the correct carburetor fuel pressure.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this regulator fit my carbureted motorcycle or car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes 8mm and 10mm adapters and a fuel block designed to fit most common carbureted fuel lines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure should I set for a typical carburetor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Start around 2–3 PSI and fine-tune while observing idle and throttle response, keeping the gauge within 1–5 PSI.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67587450175673,"sku":"B0F1TMT777","price":96.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-regulator-front-view_358390f0-897d-48fc-8aa5-397a5324923a.jpg?v=1790508595"},{"product_id":"yeherit-ls-gen-4-valley-cover-plate-kit-for-gm-v8-12598832-aluminum-o-ring-sealed","title":"YEHERIT LS Gen 4 Valley Cover Plate Kit for GM V8 (12598832) — Aluminum, O-ring Sealed","description":"\u003cstrong\u003eYEHERIT's aluminum valley cover plate kit is a direct-fit replacement for LS Gen 4 non-AFM\/DOD valley pans, engineered to stop oil leaks and protect your engine valley with a durable, heat-resistant finish.\u003c\/strong\u003e\n\n\u003cp\u003eThis valley cover plate kit is built from sandblasted, painted aluminum and arrives with gasket hardware to replace OE valley pans on many GM V8 engines. It’s intended as a like-for-like service part for vehicles that use part numbers such as 12598832 and 12610141, giving a corrosion-resistant barrier across the lifter valley while sealing oil passages with supplied O-rings and a precision gasket. The kit aims to simplify installation by including all necessary bolts and sealing components so you can restore proper oil control without hunting down separate pieces.\u003c\/p\u003e\n\n\u003ch3\u003eWill this valley cover fit my Chevrolet, GMC, Cadillac or Hummer?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit is designed to fit a broad set of GM vehicles equipped with LS Gen 4 non-AFM\/DOD engines. Before purchasing, compare your original part number and engine configuration to the listed compatibilities to ensure correct fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include Chevy Express 1500–4500, Silverado 1500\/2500 HD, Suburban 2500, Tahoe\u003c\/li\u003e\n  \u003cli\u003eGMC fitments include Canyon, Savana 1500–4500, Sierra 1500\/2500 HD, Yukon\u003c\/li\u003e\n  \u003cli\u003eAlso listed for Cadillac Escalade and Hummer H2\/H3 on applicable LS Gen 4 engines\u003c\/li\u003e\n  \u003cli\u003eReplacement numbers: 12598832 and 12610141 — verify against your OEM part\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit prevent leaks and protect engine components?\u003c\/h3\u003e\n\n\u003cp\u003eThe cover uses an integrated O-ring seal layout and a dedicated aluminum gasket to block oil passages and reduce the likelihood of internal seepage. That helps maintain stable oil pressure in the lifter valley and lowers the risk of related component wear from oil loss or contamination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eO-ring rubber seals at oil passage points to prevent seepage\u003c\/li\u003e\n  \u003cli\u003eAluminum gasket provides a flat, durable sealing surface\u003c\/li\u003e\n  \u003cli\u003eIncludes 8 O-rings and 11 bolts for a complete seal replacement\u003c\/li\u003e\n  \u003cli\u003eHelps reduce risk of lifter-related issues by preserving oil pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish does the cover use, and why do they matter?\u003c\/h3\u003e\n\n\u003cp\u003eThe plate is crafted from high-grade aluminum with a sandblasted and painted surface, chosen to withstand heat, resist corrosion, and hold up in demanding engine bays. That finish improves long-term durability and helps prevent surface degradation from oil, road salts, and high operating temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium aluminum construction for strength and weight savings\u003c\/li\u003e\n  \u003cli\u003eSandblasted surface increases paint adhesion and texture\u003c\/li\u003e\n  \u003cli\u003ePainted finish adds corrosion resistance and an OEM-style appearance\u003c\/li\u003e\n  \u003cli\u003eDesigned for engines exposed to heavy loads or harsh climates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how does it simplify installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes the valley cover plate plus all gaskets, O-rings, and bolts required to complete the replacement in one purchase. Having the correct hardware and seals on hand reduces downtime and prevents delays from missing components during reassembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 aluminum valley cover plate and 1 aluminum valley cover gasket\u003c\/li\u003e\n  \u003cli\u003e8 O-rings to seal oil passages and prevent leaks\u003c\/li\u003e\n  \u003cli\u003e11 bolts included for mounting the cover securely\u003c\/li\u003e\n  \u003cli\u003eSupplied as a complete OE-replacement-style kit to streamline installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This valley cover kit is intended for mechanics, restoration specialists, and vehicle owners repairing or maintaining Gen 4 LS-family engines that require a non-AFM\/DOD valley pan replacement. It’s a practical option when you want a corrosion-resistant aluminum part with the sealing hardware included — ideal for fleet maintenance, performance builds, or routine engine service where dependable oil control and a straightforward installation are priorities. Please confirm fitment against your engine’s part number and configuration before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this cover replace part number 12598832?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it serves as a direct replacement for part numbers 12598832 and 12610141; verify your engine configuration before purchasing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are all seals and bolts included for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes the aluminum gasket, 8 O-rings, and 11 bolts for a complete installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67587504079033,"sku":"B0DR8GMR8P","price":114.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-valley-cover-front-view.jpg?v=1790510758"},{"product_id":"yeherit-liftgate-latch-lock-actuator-motor-fa1z7443150b-for-ford-lincoln-suvs-direct-fit-durable-oem-replacement","title":"YEHERIT Liftgate Latch Lock Actuator Motor FA1Z7443150B for Ford \u0026 Lincoln SUVs — Direct-Fit, Durable OEM Replacement","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT FA1Z7443150B is a direct-fit liftgate latch lock actuator motor designed to replace faulty tailgate and trunk latch actuators on select Ford and Lincoln SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty actuator motor restores reliable locking and unlocking of the liftgate or trunk, matching OEM dimensions and mounting points for a straightforward swap. Built from durable components, it resists vibration and temperature swings so your vehicle’s rear latch operates consistently during daily use. Before ordering, compare your existing part number and connector to the listed OEM cross-references to confirm compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWill this actuator fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThis actuator is engineered for specific Ford and Lincoln models from mid-2010s to early-2020s. Confirm fit by checking your vehicle year and the original part number; the unit replaces several OEM references for a precise match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Ford Edge (2015–2020), Ford Escape (2020–2021), Ford Expedition (2018–2020), Ford Explorer\/Police Interceptor (2020).\u003c\/li\u003e\n  \u003cli\u003eLincoln fitments: MKX (2016–2018), Nautilus (2019–2020), Navigator (2018–2020), Corsair (2020).\u003c\/li\u003e\n  \u003cli\u003eOEM cross-references: FA1Z7443150B, FA1Z-7443150-B, DS7Z7443150B, GJ5Z7443150B, 931-273.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically requires basic hand tools and minimal mechanical experience; the actuator bolts into the factory mounting points and plugs into the existing wiring harness. Expect a 30–90 minute job depending on experience and whether interior trim must be removed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools often needed: socket set, trim panel tools, screwdrivers.\u003c\/li\u003e\n  \u003cli\u003eProcedure: remove trim, unplug old actuator, unbolt and swap, reconnect and test operation.\u003c\/li\u003e\n  \u003cli\u003eTip: check connector pins and test electrical function before full reassembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and durability can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe actuator is made from reinforced components to resist wear from repeated cycles, road vibration, and temperature changes. While no part lasts forever, the design aims to match or exceed typical OEM service life for dependable operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstructed for temperature tolerance and vibration resistance.\u003c\/li\u003e\n  \u003cli\u003eSealed components reduce moisture intrusion compared to cheaper alternatives.\u003c\/li\u003e\n  \u003cli\u003eBacked by a one-year product quality support guarantee from YEHERIT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this actuator affect vehicle security or central locking?\u003c\/h3\u003e\n\u003cp\u003eA failing liftgate actuator can cause the rear door to remain locked or unlocked unpredictably, creating convenience and security concerns. Replacing a worn unit with this YEHERIT actuator restores consistent locking behavior and reintegrates the tailgate with your vehicle’s central locking system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents intermittent lock\/unlock failures that compromise access or alarm behavior.\u003c\/li\u003e\n  \u003cli\u003eRestores reliable communication with vehicle remote and interior lock switches.\u003c\/li\u003e\n  \u003cli\u003eHelps eliminate false “unlocked” status or stuck latch conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: Owners or technicians working on compatible Ford and Lincoln SUVs who need a dependable, direct-replacement liftgate latch actuator without modifying wiring or mounts. It suits drivers wanting to restore correct rear-door locking, fleet managers maintaining vehicle uptime, and DIY mechanics who prefer OEM-style interchangeability and a one-year support window.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which vehicles are compatible with this actuator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits Ford Edge 2015–2020, Ford Escape 2020–2021, Expedition 2018–2020, Explorer 2020, and several Lincoln models—verify your part number.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does YEHERIT offer a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, YEHERIT provides one year of product quality support for this actuator.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67587618373817,"sku":"B0DJVV7DV7","price":98.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-fa1z7443150b-front-view.jpg?v=1790514453"},{"product_id":"yeherit-white-led-side-marker-lights-for-dodge-charger-2015-2023-dot-sae-certified-ip67-water-resistant","title":"YEHERIT White LED Side Marker Lights for Dodge Charger 2015-2023 — DOT\/SAE Certified, IP67 Water-Resistant","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT White LED Side Marker Lights are direct-fit, DOT\/SAE-certified replacements for Charger front and rear fender markers (2015–2023) that deliver substantially brighter, energy-efficient illumination with simple plug-and-play installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese aftermarket side marker lights are engineered to replace factory part numbers 68214404AA, 68214405AA, 68214126AA, and 68214127AA on Dodge Charger models from 2015 through 2023. They use a high-density LED layout and durable construction to improve visibility while matching the factory fitment and electrical connections. Built to withstand the elements, the lamps meet IP67 protection standards and are DOT and SAE certified for road use.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these YEHERIT marker lights compared to stock?\u003c\/h3\u003e\n\n\u003cp\u003eThe YEHERIT markers use a denser LED array than the original units, offering a noticeable gain in luminosity without higher power draw. Where the factory markers typically contain just two LED chips, the YEHERIT front lamps use 39 LEDs and the rear lamps use 42 LEDs to produce a more visible signature.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFront: 39 high-efficiency LED chips for stronger forward-facing light.\u003c\/li\u003e\n  \u003cli\u003eRear: 42 LED chips for clearer rear-side visibility.\u003c\/li\u003e\n  \u003cli\u003eLower energy consumption than equivalent halogen or incandescent bulbs.\u003c\/li\u003e\n  \u003cli\u003eImproved light uniformity to reduce hot spots and create a cleaner beam.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these marker lights easy to install on a Dodge Charger?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the YEHERIT lights are designed for a direct, plug-and-play swap with the existing fender marker connectors. No special tools or wiring modifications are required; simply remove the factory module and install the YEHERIT unit to restore fitment and function immediately.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDirect replacement for factory part numbers listed for 2015–2023 Chargers.\u003c\/li\u003e\n  \u003cli\u003eNo cutting, splicing, or additional adapters needed.\u003c\/li\u003e\n  \u003cli\u003eSame mounting points and connector type to preserve factory alignment.\u003c\/li\u003e\n  \u003cli\u003eQuick installation that can be completed in minutes by a DIYer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and safety standards do these lights meet?\u003c\/h3\u003e\n\n\u003cp\u003eYEHERIT markers are engineered for long-term reliability in automotive conditions. They carry DOT and SAE certifications and use sealed housings rated IP67 to resist water, dust, and shocks encountered during regular driving and adverse weather.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDOT and SAE certified for compliant road use and signaling performance.\u003c\/li\u003e\n  \u003cli\u003eIP67-rated sealing protects internal electronics from moisture and dust.\u003c\/li\u003e\n  \u003cli\u003eRobust materials and shock resistance for extended service life.\u003c\/li\u003e\n  \u003cli\u003eEnergy-efficient LEDs that minimize heat and electrical load on the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights affect my vehicle’s electrical system or warranty?\u003c\/h3\u003e\n\n\u003cp\u003eBecause the YEHERIT markers are designed to match the Charger’s original connector and electrical characteristics, they typically do not require changes to the vehicle wiring. However, vehicle warranties vary; consult your warranty terms or dealer if aftermarket lighting is a concern.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEngineered for compatible voltage and connector type to avoid electrical issues.\u003c\/li\u003e\n  \u003cli\u003eNo resistors or converters needed for standard Charger models.\u003c\/li\u003e\n  \u003cli\u003eConsult dealer documentation if concerned about warranty impacts.\u003c\/li\u003e\n  \u003cli\u003eInstallation that preserves original mounting and connectors lowers modification risk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These YEHERIT White LED Side Marker Lights are intended for Dodge Charger owners (2015–2023) who want a brighter, more consistent marker light without complex installation. They suit drivers seeking improved visibility and a modern LED look while retaining a factory-style fit, plus DIY enthusiasts wanting a rapid upgrade with certified, weatherproof components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Dodge Charger years do these fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit Dodge Charger models from 2015 through 2023 and replace the listed OEM part numbers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these require wiring changes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No wiring changes are normally required; they are designed for plug-and-play installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67587641639097,"sku":"B0DSDSKH3H","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-marker-light-front-view.jpg?v=1790514654"},{"product_id":"yeherit-fuel-filter-element-for-6-7l-powerstroke-2017-2025-ford-f-250-f-350-f-450-f-550-direct-fit-water-separator-oem-replacem","title":"YEHERIT Fuel Filter Element for 6.7L Powerstroke — 2017-2025 Ford F‑250\/F‑350\/F‑450\/F‑550 Direct-Fit Water Separator, OEM Replacem","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT Fuel Filter Element for 6.7L Powerstroke is a direct-fit diesel fuel filter and water separator kit engineered to replace OEM FD-4624\/FD-4625 and HC3Z-9N184-B\/C parts on 2017–2025 Ford Super Duty trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis YEHERIT kit addresses the common needs of modern Powerstroke diesel owners: clean fuel, reduced water contamination, and dependable replacement parts that meet factory fitment. Built to match OEM dimensions and filtration performance, the element is designed for quick swap-in installation so you can get your F-250, F-350, F-450 or F-550 back on the road with minimal downtime.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter protect my 6.7L Powerstroke engine?\u003c\/h3\u003e\n\u003cp\u003eThe filter screens out particulates and separates water from diesel before fuel reaches injectors and high-pressure components. Removing contaminants helps maintain consistent fuel flow and reduces wear on fuel pumps and injectors without altering engine performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMulti-stage media traps dirt, rust, and carbon particles.\u003c\/li\u003e\n  \u003cli\u003eIntegrated water separation reduces corrosion risk in the fuel system.\u003c\/li\u003e\n  \u003cli\u003eConstructed to withstand typical diesel operating temperatures and pressures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my 2017–2025 Ford F-series Super Duty model?\u003c\/h3\u003e\n\u003cp\u003eThis element is made as a direct replacement for the commonly specified OEM part numbers and engineered to match original sealing and dimensions. If your truck uses FD-4624, FD-4625, HC3Z-9N184-B or HC3Z-9N184-C style elements, this kit is compatible without modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Ford F-250, F-350, F-450, F-550 (2017–2025) with 6.7L Powerstroke.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM numbers: FD4624, FD4625, HC3Z-9N184-B, HC3Z-9N184-C.\u003c\/li\u003e\n  \u003cli\u003eDesigned for direct drop-in installation to OEM housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT engineered this replacement element to OEM dimensions so the swap is fast and intuitive for anyone familiar with routine fuel filter service. Changing the element typically follows the same steps as the factory part, and routine replacement intervals depend on driving conditions and fuel quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrop-in fit for the original filter housing—no trimming or adapters required.\u003c\/li\u003e\n  \u003cli\u003eWorks with standard fuel-service tools and procedures.\u003c\/li\u003e\n  \u003cli\u003eRecommended inspection or replacement per manufacturer or service schedule.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat build quality and materials can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe element uses durable filtration media and a robust outer structure to hold up under diesel operating stresses. Materials are selected to resist degradation from diesel, additives, and routine vibration in heavy-duty truck environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-efficiency filter media for consistent particulate removal.\u003c\/li\u003e\n  \u003cli\u003eRigid end caps and core to maintain shape under pressure.\u003c\/li\u003e\n  \u003cli\u003eSealing surfaces engineered for leak-free operation when installed correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The YEHERIT Fuel Filter Element 6.7L Powerstroke is aimed at owners and technicians of 2017–2025 Ford Super Duty trucks who need an affordable, OEM-compatible replacement fuel filter and water separator. It suits fleet maintenance programs, owner-operators, and DIY mechanics who want dependable filtration that matches factory fitment and helps protect critical fuel-system components. Choose this kit when you want straightforward installation, solid materials, and a design intended to meet the same service expectations as the original equipment part.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace OEM FD-4624\/FD-4625 and HC3Z part numbers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This YEHERIT element is manufactured as a direct replacement for FD-4624, FD-4625, HC3Z-9N184-B, and HC3Z-9N184-C.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install it myself without special tools?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most owners can install it with common service tools; follow standard fuel-filter change steps and safety precautions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67589011964089,"sku":"B0F384PDPY","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-packaging-fuel-filter-element.jpg?v=1790528950"},{"product_id":"yeherit-aluminum-engine-coolant-housing-water-outlet-kit-for-1-4l-buick-chevy-2011-2020-oe-fit-complete-seal-sensor","title":"YEHERIT Aluminum Engine Coolant Housing Water Outlet Kit for 1.4L Buick\/Chevy (2011–2020) — OE Fit, Complete Seal \u0026 Sensor","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT aluminum engine coolant housing water outlet kit is a complete, all-aluminum replacement assembly designed to restore reliable coolant flow and resist warping in compatible 1.4L GM vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit replaces worn or damaged thermostat housing assemblies on a range of small‑engine GM cars and SUVs, delivering a durable metal construction, preinstalled seals, and all needed fittings for straightforward installation. Built to match OE mounting points and hose connections, the assembly reduces the common failure points of plastic housings while providing parts you need in one package: water outlet, temperature sensor, inlet and oil‑cooler hoses, clips, bolts and rubber seals.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers does this replace?\u003c\/h3\u003e\n\u003cp\u003eThis water outlet kit fits many 1.4L turbocharged and naturally aspirated models from Buick and Chevrolet produced in the 2011–2020 timeframe. It directly replaces a list of common OEM numbers so you can confirm compatibility before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Buick Encore (2013–2019 1.4L), Chevrolet Cruze (2011–2016 and 2016 Limited 1.4L), Chevrolet Sonic (2012–2020 1.4L), Chevrolet Trax (2015–2020 1.4L).\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers: 25193922, 902-846, 55565334, 1511105, 55596898, 13251447.\u003c\/li\u003e\n  \u003cli\u003eMatches OEM mounting points and sensor location for plug‑and‑play fitment in most affected engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the aluminum design help compared with the original plastic housing?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT housing uses die‑cast aluminum to reduce thermal distortion and long‑term degradation that commonly affects plastic housings. Aluminum resists warping from repeated heat cycles, providing a more stable seal surface and improved longevity under engine heat and pressure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAll‑aluminum body reduces cracking and deformation from thermal cycling.\u003c\/li\u003e\n  \u003cli\u003eMatte frosted finish resists surface scratches and improves corrosion resistance.\u003c\/li\u003e\n  \u003cli\u003eNeoprene O‑ring and included hardware help maintain a leak‑resistant joint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and will I need extra parts to install?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with the key components needed for a typical replacement, minimizing trips to the parts store. In most cases you won’t need additional hoses, sensors, or fasteners because the assembly includes the temperature sensor and both inlet and oil‑cooler hoses plus clips and bolts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: water outlet housing, temperature sensor, inlet hose, oil cooler hose, clips, bolts, rubber seals.\u003c\/li\u003e\n  \u003cli\u003eSupplies you may still want: coolant, threadlocker for bolts, and basic hand tools for removal\/installation.\u003c\/li\u003e\n  \u003cli\u003eVerify hose routing and sensor connector fit against your vehicle before final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this restore cooling performance and prevent coolant leaks?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failed housing with this aluminum assembly restores a secure coolant pathway and reduces the likelihood of leaks associated with cracked or warped plastic housings. While it replaces the mechanical housing and seals, overall cooling system health also depends on proper coolant level, radiator condition, and functioning thermostat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision housing geometry and compression‑tested components reduce leak risk at the mating surface.\u003c\/li\u003e\n  \u003cli\u003eNeoprene O‑ring and included fasteners help ensure a consistent seal during reassembly.\u003c\/li\u003e\n  \u003cli\u003eRecommended to pressure‑test the system and refill with correct coolant after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YEHERIT aluminum coolant housing water outlet kit is intended for DIY mechanics and professional technicians working on 1.4L Buick Encore, Chevrolet Cruze, Sonic, and Trax models that show coolant leaks, overheating, or failure of a plastic thermostat housing. It suits buyers who want a more durable metal replacement that includes the main hoses, sensor, and fasteners to minimize extra parts purchases and downtime. If you need exact fitment, confirm one of the listed replacement numbers against your vehicle’s part reference before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include the temperature sensor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit includes a temperature sensor pre‑fitted to the housing assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2014 Chevrolet Cruze 1.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit is compatible with 2011–2016 Chevrolet Cruze 1.4L models; confirm part numbers to be certain.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67589018615993,"sku":"B0DYNX6P44","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-view-aluminum-housing.jpg?v=1790528970"},{"product_id":"yeherit-5-7l-exhaust-manifold-bolts-nuts-kit-for-chrysler-hemi-complete-studs-corrosion-resistant","title":"YEHERIT 5.7L Exhaust Manifold Bolts \u0026 Nuts Kit for Chrysler HEMI — Complete Studs, Corrosion-Resistant","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT 5.7 exhaust manifold bolts \u0026amp; nuts kit is a complete replacement set engineered to restore a proper seal and secure the manifold on compatible 5.7L Chrysler-family engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis comprehensive kit replaces worn or damaged fasteners on 5.7L HEMI-equipped vehicles across Dodge, RAM, Chrysler and Jeep lineups. The set includes studs, bolts and nuts for both left and right banks, and it matches multiple OEM part numbers so you can swap in components without having to hunt down individual pieces. Constructed from corrosion-resistant alloys and inspected before shipping, the kit is intended to match factory fitment and torque requirements for a reliable repair.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and OEM numbers does this kit match?\u003c\/h3\u003e\n\u003cp\u003eThis kit fits a wide range of Chrysler-family models powered by the 5.7L engine. Verify compatibility by checking your vehicle year and OEM reference before ordering to ensure an exact match.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Dodge: 2009–2020 Challenger, Charger, Durango.\u003c\/li\u003e\n\u003cli\u003eCompatible with RAM: 2011–2020 Ram 1500\/2500\/3500; 2017–2018 Ram 4000; 2014–2020 Ram 4500\/5500.\u003c\/li\u003e\n\u003cli\u003eCompatible with Chrysler: 2009 Aspen; 2009–2020 300.\u003c\/li\u003e\n\u003cli\u003eCompatible with Jeep: 2009–2010 Commander and Grand Cherokee.\u003c\/li\u003e\n\u003cli\u003eReplaces OEM numbers: 03309, 06509863AA, 6505316AA, 6507746AA, 6509544AA, 6509863AA, 6510140AA, 6510141AA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the quality and construction of the fasteners?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT uses durable, corrosion-resistant materials and subjects every kit to inspection before it leaves the factory. These fasteners are manufactured to match the form, fit and basic function of the original parts for consistent performance when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from high-strength, rust-resistant alloys for long service life.\u003c\/li\u003e\n\u003cli\u003eCritical dimensions and thread profiles tested to meet factory tolerances.\u003c\/li\u003e\n\u003cli\u003eEach kit is 100% inspected to reduce the chance of out-of-spec components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what do I need for installation?\u003c\/h3\u003e\n\u003cp\u003eThe package contains a complete set of bolts, studs and nuts to service both banks of the 5.7L exhaust manifold. Basic hand tools and a torque wrench are required for correct installation; consider replacing manifold gaskets during the job for best sealing results.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete set of manifold studs, bolts and nuts for left and right sides.\u003c\/li\u003e\n\u003cli\u003eUse a torque wrench and manufacturer torque specs for final tightening.\u003c\/li\u003e\n\u003cli\u003eRecommended to replace exhaust manifold gaskets and anti-seize as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit prevent leaks and loosened fasteners long-term?\u003c\/h3\u003e\n\u003cp\u003eWhen installed to the correct torque and combined with new gaskets, the kit restores factory clamping force and helps prevent exhaust leaks and loose fasteners. Long-term performance also depends on proper installation technique and operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRestores correct clamping pressure when tightened to spec.\u003c\/li\u003e\n\u003cli\u003eHelps reduce exhaust leaks caused by broken or stretched fasteners.\u003c\/li\u003e\n\u003cli\u003eDurable finish helps resist corrosion from heat and road salt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This replacement fastener kit is aimed at DIY mechanics, independent shops and fleet technicians who need a reliable, complete set of exhaust manifold bolts and nuts for 5.7L HEMI engines across Dodge, RAM, Chrysler and Jeep vehicles. If you are preparing for a manifold replacement, fixing exhaust leaks, or replacing broken studs, this kit provides the matched components and OEM cross-reference numbers needed for a smooth, reliable repair. If you’re unsure about compatibility, check your vehicle’s OEM part number against the list before ordering or contact YEHERIT customer support for confirmation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my 2015 Dodge Charger 5.7?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the kit lists Dodge Charger 2009–2020 compatibility; confirm by matching your vehicle’s OEM part number to the kit’s cross-reference list.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are gaskets included with the fastener kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, gaskets are not included; it’s recommended to install new manifold gaskets when replacing fasteners.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67589418123449,"sku":"B0F4CTY16K","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-exhaust-manifold-fastener-kit-front-packaging.jpg?v=1790530136"},{"product_id":"yeherit-horn-assembly-for-2016-2019-ford-explorer-police-interceptor-utility-dual-tone-direct-fit-weather-resistant","title":"YEHERIT Horn Assembly for 2016-2019 Ford Explorer \u0026 Police Interceptor Utility - Dual-Tone Direct-Fit, Weather-Resistant","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT Horn Assembly is a direct-fit dual-tone replacement horn designed to restore loud, reliable signaling on 2016–2019 Ford Explorer and Police Interceptor Utility models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis YEHERIT horn assembly swaps directly into specified Ford Explorer and Police Interceptor Utility vehicles without complicated rewiring, offering a robust dual-snail design that delivers clearer, more powerful sound than many worn stock horns. Made from durable ABS and metal with copper electrical contacts, it’s built to withstand heat, moisture, and road vibration so you get consistent performance in everyday driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eWill this horn fit my 2016–2019 Ford Explorer or Police Interceptor Utility?\u003c\/h3\u003e\n\u003cp\u003eThis horn assembly is engineered for direct replacement on the listed model years and engine options, matching the OE mounting points and electrical configuration. Confirm compatibility by checking the OE number or matching your vehicle’s original horn shape and connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2016–2019 Ford Explorer 2.3L L4, 3.5L V6, 3.7L V6\u003c\/li\u003e\n  \u003cli\u003eFits 2016–2019 Ford Police Interceptor Utility 3.5L and 3.7L V6\u003c\/li\u003e\n  \u003cli\u003eOE reference numbers: GB5Z-13832-A \/ GB5Z13832A for verification\u003c\/li\u003e\n  \u003cli\u003eDesigned for the factory 12 V electrical system and original mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow loud and reliable is this dual-tone horn compared to the stock unit?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT dual snail horn produces a clear two-note tone intended to improve audibility over aging or weak horns. Its copper plugs and metal components enhance electrical conductivity and sound output, while the ABS shell helps protect internal elements from moisture and heat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-tone (high\/low) for better attention-getting power\u003c\/li\u003e\n  \u003cli\u003eCopper contacts for improved conductivity and louder output\u003c\/li\u003e\n  \u003cli\u003eABS housing for water resistance and temperature stability\u003c\/li\u003e\n  \u003cli\u003eEngineered to function reliably in varied weather conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and steps are needed to install the replacement horn?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward: the horn mounts to the original bracket and uses the same electrical connector, so no vehicle rewiring is required. You will need basic hand tools to remove the old horn and secure the replacement part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools typically required: socket wrench and wire crimping tool (tools not included)\u003c\/li\u003e\n  \u003cli\u003eNo custom wiring—fits the factory 12 V connector and mounting points\u003c\/li\u003e\n  \u003cli\u003eStructural design prevents looseness or detachment during driving\u003c\/li\u003e\n  \u003cli\u003eQuick swap process for most DIY installers or professional shops\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and specifications should I expect from this horn assembly?\u003c\/h3\u003e\n\u003cp\u003eThe assembly combines metal and ABS components for durability and weather resistance and is rated for the standard 12 V automotive electrical system. The design and materials aim to extend service life and maintain consistent sound quality over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eColor: Black; Materials: metal and ABS\u003c\/li\u003e\n  \u003cli\u003eVoltage: 12 V automotive system compatibility\u003c\/li\u003e\n  \u003cli\u003eOE numbers for reference: GB5Z-13832-A \/ GB5Z13832A\u003c\/li\u003e\n  \u003cli\u003eCopper plug contacts to improve conductivity and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: drivers and fleet managers who own 2016–2019 Ford Explorer or Police Interceptor Utility vehicles and need a dependable, direct-fit horn replacement that restores audibility and resists weathering. It’s well suited for DIY installers wanting a quick swap that uses existing vehicle mounts and connectors, and for shops seeking a reliable aftermarket option that matches OE fit and function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this horn require rewiring to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The YEHERIT horn is a direct replacement that uses the factory 12V connector and original mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which Ford models and years does this fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Fits 2016–2019 Ford Explorer (2.3L, 3.5L, 3.7L) and Police Interceptor Utility 3.5L\/3.7L.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67590617858233,"sku":"B0F48D3YF6","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-view-horn-assembly.jpg?v=1790535285"},{"product_id":"yeherit-front-engine-coolant-reservoir-expansion-tank-for-jeep-renegade-fiat-500x-direct-fit-heat-resistant","title":"YEHERIT Front Engine Coolant Reservoir Expansion Tank for Jeep Renegade \u0026 Fiat 500X — Direct-Fit, Heat-Resistant","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT Front Engine Coolant Reservoir Expansion Tank is a direct-fit replacement coolant recovery tank designed to manage overflow and maintain optimal coolant levels for compatible Jeep Renegade and Fiat 500X models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle's original coolant reservoir is cracked, leaking, or otherwise compromised, replacing it with a dependable aftermarket unit restores the cooling system's ability to regulate pressure and fluid volume. This YEHERIT tank is molded from heat- and pressure-resistant plastic and built to match factory mounting points and hose connections so installation is straightforward and secure. It’s compatible with specific model years and engine sizes, making it a practical repair part that helps prevent coolant loss and supports engine performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines does this reservoir fit?\u003c\/h3\u003e\n\u003cp\u003eThis expansion tank is compatible with 2015–2018 Jeep Renegade models (1.3L, 1.4L, 2.4L) and 2016–2018 Fiat 500X models (2.4L). It replaces a long list of OEM part numbers, so it works as a direct swap for many factory variants. Always double-check your vehicle’s part number to confirm fitment before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Jeep Renegade 2015–2018 (1.3L, 1.4L, 2.4L)\u003c\/li\u003e\n  \u003cli\u003eCompatible: Fiat 500X 2016–2018 (2.4L)\u003c\/li\u003e\n  \u003cli\u003eReplaces multiple OEM part numbers for broad coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the YEHERIT radiator expansion tank?\u003c\/h3\u003e\n\u003cp\u003eThe tank is manufactured from durable plastic formulated to withstand elevated under-hood temperatures and the pressures present in a modern cooling system. Its construction resists warping and cracking that commonly develop over time, prolonging service life compared with a damaged OEM tank. The material choice balances toughness with light weight for reliable everyday performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat- and pressure-resistant plastic construction\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist warping and cracking under thermal stress\u003c\/li\u003e\n  \u003cli\u003eEngineered for long-term reliability in harsh engine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult or will I need modifications?\u003c\/h3\u003e\n\u003cp\u003eThis YEHERIT reservoir is engineered as a direct-fit replacement, matching factory mounting points and hose connections to minimize installation time. Most vehicle owners or mechanics can complete the swap without modifying brackets or hoses; simply drain the cooling system partially, disconnect the old tank, transfer any sensors or caps if needed, and mount the new unit. Replace coolant as required and check for leaks after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design for straightforward installation\u003c\/li\u003e\n  \u003cli\u003eNo modifications required to mounting points or hoses\u003c\/li\u003e\n  \u003cli\u003eFollow standard coolant safety and bleeding procedures after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits can I expect from replacing the reservoir?\u003c\/h3\u003e\n\u003cp\u003eReplacing a failing reservoir stops coolant loss and helps the cooling system maintain proper fluid levels and pressure balance. That reduces the risk of localized overheating and supports consistent engine temperature control under normal driving conditions. While it does not alter engine power, it helps protect engine components by keeping the cooling system functioning correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents coolant leaks and overflow\u003c\/li\u003e\n  \u003cli\u003eHelps maintain stable coolant levels and pressure\u003c\/li\u003e\n  \u003cli\u003eProtects engine components by supporting reliable temperature control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers of compatible Jeep Renegade and Fiat 500X models who need a reliable, OEM-style replacement coolant reservoir—especially those dealing with cracked or leaking tanks, coolant loss, or dashboard temperature warnings. It’s a practical part for DIY enthusiasts and professional mechanics who want a straightforward swap that restores the cooling system’s integrity without extensive modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this tank fit my 2017 Jeep Renegade 2.4L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. This YEHERIT reservoir lists compatibility with 2015–2018 Jeep Renegade 2.4L models; verify your vehicle’s part number before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does installation require special tools or modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No modifications are required. Standard hand tools and basic coolant handling are typically all that’s needed for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67591265157305,"sku":"B0F1MSTRNV","price":71.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-engine-coolant-reservoir-front-view.jpg?v=1790545588"},{"product_id":"yeherit-coolant-reservoir-recovery-tank-for-chevrolet-sonic-2012-2020-1-4l-1-6l-1-8l-oem-fit-pressure-cap-included","title":"YEHERIT Coolant Reservoir Recovery Tank for Chevrolet Sonic 2012-2020 (1.4L\/1.6L\/1.8L) – OEM Fit, Pressure Cap Included","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT 603-386 is a direct-fit front engine coolant reservoir and cap engineered to replace worn or damaged overflow tanks on 2012–2020 Chevrolet Sonic 1.4L, 1.6L, and 1.8L engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement coolant recovery bottle is manufactured to match OEM fitment and function for the Chevy Sonic, offering a durable plastic construction, a reliable pressure cap, and pre-molded mounting points so you can restore your vehicle's cooling system without modification. Check the part numbers listed for compatibility before ordering to ensure a correct match with your vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eWill this reservoir fit my Chevy Sonic model and engine?\u003c\/h3\u003e\n\u003cp\u003eThis tank is designed specifically to fit Chevy Sonic model years 2012 through 2020 with 1.4L, 1.6L, and 1.8L L4 engine options. Confirm fitment by comparing the listed replacement part numbers with your vehicle's current reservoir or service manual.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 2012–2020 Chevrolet Sonic\u003c\/li\u003e\n  \u003cli\u003eEngines: 1.4L, 1.6L, 1.8L L4\u003c\/li\u003e\n  \u003cli\u003eCross-reference numbers: GM3014167, 603-386, 42609220\u003c\/li\u003e\n  \u003cli\u003eAlso replaces: 13502353, 95048411\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement tank protect the engine?\u003c\/h3\u003e\n\u003cp\u003eThe reservoir manages coolant expansion and recovery, keeping the system topped up and helping to prevent low coolant conditions that can stress the engine. By reliably collecting overflow and returning coolant to the radiator, it supports proper operating temperature ranges under normal driving conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eControls coolant overflow and return to the cooling system\u003c\/li\u003e\n  \u003cli\u003eMaintains proper fluid levels to reduce overheating risk\u003c\/li\u003e\n  \u003cli\u003eHelps prevent air pockets that can impair circulation\u003c\/li\u003e\n  \u003cli\u003eIncludes a pressure-cap to preserve proper system pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features does the YEHERIT tank offer?\u003c\/h3\u003e\n\u003cp\u003eConstructed from robust thermoplastic engineered for automotive cooling systems, this reservoir resists heat, pressure and routine vibration. Molded mounting points and a snug cap seal reduce the chance of leaks and premature failure when installed as intended.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature resistant plastic construction\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand normal engine bay pressure cycles\u003c\/li\u003e\n  \u003cli\u003ePre-formed mounting tabs for stable installation\u003c\/li\u003e\n  \u003cli\u003eDurable cap included to maintain system pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward and typically requires only basic tools; the tank replaces the factory unit without cutting or modification. Always allow the engine to cool, drain excess coolant as needed, and ensure secure hose and mounting connections to avoid leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple bolt-on replacement—no cutting or fabrication\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools and coolant catch pan recommended\u003c\/li\u003e\n  \u003cli\u003eInspect hoses and clamps; replace if brittle or leaking\u003c\/li\u003e\n  \u003cli\u003eRefill and bleed the cooling system per vehicle instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YEHERIT 603-386 coolant reservoir is aimed at Chevy Sonic owners, DIY mechanics, and independent repair shops seeking a cost-effective, OEM-style replacement for a cracked, leaking, or missing overflow bottle. If your vehicle matches the listed years and engine sizes and you need a reliable, easy-to-install reservoir that cross-references GM3014167, 603-386, 42609220, 13502353, or 95048411, this part restores proper coolant management and system integrity.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the YEHERIT tank include the pressure cap?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the unit ships complete with the matching pressure cap needed for proper cooling system operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install this reservoir myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; it’s a bolt-on replacement requiring basic tools. Let the engine cool and follow coolant refill and bleed steps.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67591265976505,"sku":"B0F66CFBN8","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-packaging-chevy-sonic-reservoir.jpg?v=1790545607"},{"product_id":"yeherit-outside-mirror-drive-motor-6u5z-17d696-c-fits-ford-lincoln-mercury-upgraded-gears","title":"YEHERIT outside mirror drive motor 6U5Z-17D696-C — fits Ford\/Lincoln\/Mercury, upgraded gears","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT 6U5Z-17D696-C is a direct-replacement power side view mirror drive motor designed to restore electronic mirror adjustment for compatible Ford, Lincoln and Mercury models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact motor assembly replaces worn or corroded mirror actuators so you can return precise electronic adjustment to your vehicle’s passenger-side mirror. Built from reinforced materials with upgraded gears, the part is intended for plug-and-play replacement where vehicle fit and connector match, helping you avoid manual mirror adjustments and maintain safe rear visibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles does this motor fit?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT motor covers many Ford, Lincoln and Mercury models across multiple years. Compatibility includes a wide range of full-size trucks, SUVs and sedans—verify your mirror connector and part number before ordering to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord: F-150 (2004–2023), Explorer (2011–2023), Mustang (2006–2024), Edge (2007–2014), Expedition (2003–2023), Taurus series, Fiesta, Escape, Flex and others listed by year ranges.\u003c\/li\u003e\n  \u003cli\u003eLincoln: Mark LT (2006–2008, 2010–2014), MKX (2007–2015).\u003c\/li\u003e\n  \u003cli\u003eMercury: Mariner (2007), Sable (2008–2009) and compatible Taurus variants.\u003c\/li\u003e\n  \u003cli\u003eConfirm fit by comparing your existing mirror’s part number (6U5Z-17D696-C or equivalent) and connector layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it improve mirror performance?\u003c\/h3\u003e\n\u003cp\u003eThis replacement motor restores electronic positioning precision lost when an original actuator wears out or becomes contaminated by road debris. Upgraded internal gears and corrosion-resistant components aim to deliver smoother, quicker adjustment and longer service life than a worn factory unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecise stepwise movement to return accurate mirror angles.\u003c\/li\u003e\n  \u003cli\u003eDurable materials reduce wear and resist road dirt and corrosion.\u003c\/li\u003e\n  \u003cli\u003eImproved gear strength for faster response and stable positioning.\u003c\/li\u003e\n  \u003cli\u003eSuitable for real-time adjustments while monitoring rear traffic and parking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know before installation?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for someone comfortable with door panel removal and electrical connectors, but you should verify connector compatibility and keep basic hand tools handy. The motor does not include a memory recall function, and it may require lubrication and reinforcement of the mirror backing for optimal quietness and vibration control.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended to lubricate the motor gears during installation to reduce noise.\u003c\/li\u003e\n  \u003cli\u003eReinforce and adhere the mirror backing after installation to prevent vibration.\u003c\/li\u003e\n  \u003cli\u003eMotor moves in incremental steps; multiple adjustments may be required for large position changes.\u003c\/li\u003e\n  \u003cli\u003eNo built-in memory to restore a preset mirror position after disconnection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is this aftermarket motor?\u003c\/h3\u003e\n\u003cp\u003eYEHERIT designs this motor with upgraded gears and corrosion-resistant materials to extend service life compared with a worn stock actuator. While robust, longevity depends on proper installation, occasional lubrication, and avoiding exposure to excessive moisture or contaminants behind the mirror housing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpgraded strength gears for reduced strip-out risk and steady operation.\u003c\/li\u003e\n  \u003cli\u003eMaterials chosen to resist wear and road corrosion.\u003c\/li\u003e\n  \u003cli\u003eRecommended care steps provided to maximize lifespan and quiet performance.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment or installation questions within 24 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This part is for vehicle owners or mechanics replacing a failing passenger-side electronic mirror actuator on compatible Ford, Lincoln or Mercury models. It's aimed at DIYers comfortable with door panel removal and electrical connectors, independent shops looking for a durable aftermarket replacement, or fleet managers restoring mirror functionality without replacing the entire mirror assembly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this motor fit my Ford F-150?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes for many model years (2004–2023); confirm by matching your mirror’s part number or connector.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the motor have memory recall?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, this motor does not include a memory function to restore preset mirror positions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67591450558649,"sku":"B0DYHPHG26","price":64.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-motor-front-view.jpg?v=1790551515"},{"product_id":"yeherit-oil-catch-can-750ml-billet-aluminum-2-port-baffled-kit-includes-drain-breather","title":"YEHERIT Oil Catch Can 750ml Billet Aluminum 2-Port Baffled Kit, Includes Drain \u0026 Breather","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT's Universal 750ml Billet Aluminum 2-Port Baffled Oil Catch Can is a compact, high-quality oil and moisture separator designed to trap blow-by and PCV\/CCV vapors before they re-enter the intake.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned from durable 6061 billet aluminum, this 750ml catch can offers a lightweight, corrosion-resistant solution to reduce oil contamination in the intake system. It installs inline with your PCV\/CCV plumbing to collect oil mist and moisture, helping keep throttle bodies, intake manifolds, and valves cleaner. The kit arrives complete with a breather filter, drain valve, hose clamp and five hose connectors for flexible mounting on most cars.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this catch can reduce carbon and intake buildup?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT unit uses internal baffling to separate oil droplets from ventilation gases, letting condensed oil collect in the reservoir instead of coating intake surfaces. Removing these oily vapors from crankcase ventilation reduces sticky residue that can interfere with sensors and throttle operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-port design for inlet and outlet routing to PCV\/CCV systems\u003c\/li\u003e\n  \u003cli\u003eInternal baffle promotes condensation and oil separation\u003c\/li\u003e\n  \u003cli\u003e750ml capacity lengthens service intervals between drains\u003c\/li\u003e\n  \u003cli\u003eBillet 6061 aluminum resists heat and corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains everything needed for a straightforward install on most vehicles: the catch can, a breath filter, a quick-drain valve, hose clamp and five hose connectors to adapt to different tubing sizes. Basic hand tools and a few minutes of route planning are typically all that's required; some vehicles may need custom hoses or brackets for tidy mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × 750ml billet aluminum catch can\u003c\/li\u003e\n  \u003cli\u003e1 × breather filter for crankcase venting\u003c\/li\u003e\n  \u003cli\u003e1 × drain valve for easy oil removal\u003c\/li\u003e\n  \u003cli\u003e1 × hose clamp and 5 × hose connectors for fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain and service the catch can?\u003c\/h3\u003e\n\u003cp\u003eEmpty and clean the reservoir whenever noticeable oil collects or at routine service intervals to maintain performance. The quick-drain valve makes removal simple; rinse the internal baffle and housing with a degreasing solvent if heavy deposits form.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect oil level monthly under normal driving; more often under severe conditions\u003c\/li\u003e\n  \u003cli\u003eOpen drain valve to evacuate collected oil into a container for recycling\u003c\/li\u003e\n  \u003cli\u003eClean internal filter and baffle if flow appears restricted\u003c\/li\u003e\n  \u003cli\u003eReinstall securely and check hose connections for leaks after service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The YEHERIT Universal 750ml Billet Aluminum 2-Port Baffled Oil Catch Can is aimed at car owners who want to reduce oil carryover into the intake system—enthusiasts, daily drivers, and anyone performing routine engine care. It suits performance builds and turbocharged engines where blow-by and PCV flow can deposit oil in the intake tract. Because the kit includes multiple hose adaptors and a drain valve, it works for a wide range of vehicles and is a practical add-on for improving long-term intake cleanliness and component reliability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this catch can compatible with my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit is universal and fits most cars; check hose sizes and available mounting space. Additional hoses or brackets may be required for some models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I empty the catch can?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Inspect monthly under normal use and drain when oil accumulates; more frequent checks are recommended for high-blow-by engines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67591638319289,"sku":"B0D6YQM8QK","price":69.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-view-catch-can.jpg?v=1790556720"},{"product_id":"yeherit-front-engine-coolant-radiator-reservoir-expansion-tank-603-253-translucent-polypropylene-direct-fit-for-audi-vw","title":"YEHERIT Front Engine Coolant Radiator Reservoir Expansion Tank 603-253 - Translucent Polypropylene Direct-Fit for Audi \u0026 VW","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT's 603-253 front engine coolant radiator reservoir recovery expansion tank is a direct-fit replacement coolant overflow tank engineered to restore proper coolant containment and level visibility on compatible Audi and Volkswagen models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement expansion tank is molded from high-quality polypropylene to withstand engine-bay heat and repeated thermal cycling while remaining translucent for quick visual checks of coolant level. It replaces factory part numbers such as 603-253, 1K0121407F and 1K0121407A, and is designed to install without modification on a wide range of Audi and VW vehicles. If you’re troubleshooting leaks, low coolant warnings, or a cracked reservoir, this tank returns the system to serviceable condition with a straightforward swap.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tank fit my Audi or Volkswagen model?\u003c\/h3\u003e\n\u003cp\u003eThe YEHERIT 603-253 reservoir is compatible with many Audi and VW vehicles listed by model and years; check OEM part references and visual mounting points to confirm fit. It directly replaces the specified part numbers and matches factory connection locations for plug-and-play installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible Audi models: 2006–2013 A3 (including Quattro), 2015–2018 Q3 (including Quattro), 2018–2019 RS3, 2008–2009 TT, 2008–2015 TT Quattro.\u003c\/li\u003e\n  \u003cli\u003eCompatible VW models: 1993–2019 Passat, 2005–2019 Jetta, 2012–2019 Beetle, 2009–2018 Tiguan, 2010–2014 Golf and variants (GTI, R, TDI), 2007–2016 Eos, 2006–2009 Rabbit, and related CC\/Passat CC years.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part numbers: 603-253, 1K0121407F, 1K0121407A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and heat-resistant is this replacement reservoir?\u003c\/h3\u003e\n\u003cp\u003eConstructed from automotive-grade polypropylene, the reservoir resists cracking and deformation from repeated heat exposure common in the engine bay. The material balances toughness and light weight so the tank keeps its shape under pressure cycles and minimizes added mass.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality PP construction resists heat and chemical exposure.\u003c\/li\u003e\n  \u003cli\u003eTranslucent body allows visual coolant checks without removing the cap.\u003c\/li\u003e\n  \u003cli\u003eEngineered to handle thermal expansion and pressure fluctuations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools are required?\u003c\/h3\u003e\n\u003cp\u003eThis coolant reservoir is designed as a direct replacement for the factory unit, so installation is straightforward and typically requires only basic hand tools. The mounting points and hose connections match OEM locations, which reduces installation time and the need for modifications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-fit design—no cutting or custom brackets needed.\u003c\/li\u003e\n  \u003cli\u003eStandard clamps and fasteners are compatible with OEM hardware.\u003c\/li\u003e\n  \u003cli\u003eTypical install time: about 30–60 minutes depending on access and vehicle model.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits will I notice after replacing the reservoir?\u003c\/h3\u003e\n\u003cp\u003eReplacing a cracked or leaking expansion tank eliminates coolant loss, prevents low-coolant warnings, and helps maintain proper cooling system pressure. The translucent design gives quick visual confirmation of fluid level and reduces the need for frequent cap removal during checks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStops leaks that cause coolant loss and overheating risks.\u003c\/li\u003e\n  \u003cli\u003eImproves visual coolant monitoring with a clear tank body.\u003c\/li\u003e\n  \u003cli\u003eDirect replacement lowers repair time and cost compared with custom fixes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YEHERIT 603-253 coolant reservoir is intended for owners and mechanics of compatible Audi and Volkswagen models who need a reliable, OEM-equivalent replacement for a damaged or leaking expansion tank. It's suitable for DIY installers familiar with basic cooling-system service as well as professional shops seeking an affordable direct-fit part to restore coolant containment and visual level checks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace OEM part 1K0121407F?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, YEHERIT 603-253 is a direct replacement for OEM part numbers including 1K0121407F and 1K0121407A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install it myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—installation is typically straightforward with basic hand tools, matching factory mounting points and hoses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67592179613881,"sku":"B0DG8VP85J","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-view-reservoir.jpg?v=1790562155"},{"product_id":"yeherit-engine-upper-timing-chain-cover-with-gasket-for-vw-audi-2-0t-06h103269c-fit-oem-fit-leak-resistant","title":"YEHERIT Engine Upper Timing Chain Cover with Gasket for VW \u0026 Audi 2.0T (06H103269C Fit) — OEM-fit, Leak-Resistant","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT Engine Upper Timing Chain Cover with Gasket is a direct-fit replacement cover designed to seal and protect the timing chain area on many Volkswagen and Audi 2.0T engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis upper timing chain cover assembly includes a precision-molded cover and matched gasket engineered to prevent oil leaks, keep contaminants out of the timing chain area, and restore factory-style sealing. Manufactured to meet or exceed OEM tolerances, the unit is built for high-temperature resistance and corrosion protection so it holds up under normal driving conditions. Before ordering, verify compatibility with your vehicle year, model and the OE part number to ensure a correct fit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and part numbers is this timing chain cover compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThis cover fits a broad range of Volkswagen and Audi models equipped with the 2.0T engine. It replaces several OE part numbers used across model years, so cross-checking is recommended to confirm compatibility with your car.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible Audi models: A3 (2008–2013), A3 Quattro (2008–2013), A4 (2009–2015), A4 allroad (2013–2016), A4 Quattro (2009–2015), A5 and A5 Quattro (2010–2016), A6 (2012–2014), A6 Quattro (2013–2014), Q5 (2010–2016), TT and TT Quattro (2007–2014\/2009–2014).\u003c\/li\u003e\n  \u003cli\u003eCompatible Volkswagen models: GLI (2010), Beetle (2012–2016), CC (2009–2017), Eos (2009–2016), GTI (2008–2013), Jetta (2008–2009), Passat (2008–2012 depending on variant), Tiguan (2009–2016).\u003c\/li\u003e\n  \u003cli\u003eReplaces OE part numbers: 06H103269C\/G\/H\/L\/D\/F\/J — always confirm the part number on your existing cover.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this cover help prevent oil leaks and protect the timing components?\u003c\/h3\u003e\n\n\u003cp\u003eThe cover is molded from durable, heat-resistant material and supplied with a matched gasket to create a reliable seal around the timing chain housing. A proper seal prevents engine oil from escaping and keeps dirt and debris away from the chain and tensioners, which helps maintain correct chain tension and timing over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePre-installed gasket surface engineered for even compression and leak resistance.\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature material resists distortion and softening at engine operating temperatures.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish reduces long-term wear and maintains sealing surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this a direct OEM replacement and what quality checks are performed?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the YEHERIT cover is manufactured to meet or exceed OEM specifications for fit and function, designed as a direct replacement. Each unit undergoes dimensional checks and pressure\/seal testing to ensure proper fitment and leak-free performance before shipment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOEM-fit dimensions to align with factory bolt patterns and sealing surfaces.\u003c\/li\u003e\n  \u003cli\u003eMaterial and pressure testing to confirm seal integrity under thermal cycles.\u003c\/li\u003e\n  \u003cli\u003eSupplied with the correct gasket to simplify installation and reduce risk of future leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I consider before purchasing and installing this cover?\u003c\/h3\u003e\n\n\u003cp\u003eConfirm vehicle fitment and OE part number before purchase, and inspect the timing components when replacing the cover. Although the cover is a direct-fit replacement, installation involves engine access and may require removal of accessory components; professional installation is recommended if you are not experienced with timing cover procedures.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eVerify your vehicle year, engine code and OE part number match one of the listed replacements.\u003c\/li\u003e\n  \u003cli\u003eInspect timing chain, guides, and tensioner when performing the service for any wear or damage.\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs and sealing surface prep during installation to prevent leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YEHERIT timing chain cover with gasket is intended for DIY mechanics, independent repair shops, and fleet maintenance teams replacing a leaking or damaged upper timing cover on compatible Volkswagen and Audi 2.0T engines. It’s especially useful when a dependable, OEM-fit replacement and included gasket are needed to restore proper sealing and protect timing components from contamination.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this cover replace my OE part 06H103269G?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — this YEHERIT cover replaces OE numbers including 06H103269G. Verify your vehicle year and engine match the listed models before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the product include the gasket needed for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the cover ships with the matched gasket to restore the seal between the cover and engine housing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67593513566393,"sku":"B0DBQ5X357","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-view-timing-chain-cover.jpg?v=1790576363"},{"product_id":"yeherit-f-150-front-bumper-guard-pads-black-left-right-end-caps-oem-fit-for-2018-2020","title":"YEHERIT F-150 Front Bumper Guard Pads, Black Left \u0026 Right End Caps — OEM-Fit for 2018-2020","description":"\u003cp\u003e\u003cstrong\u003eThese YEHERIT front bumper guard pads are direct-fit replacements for the 2018–2020 Ford F-150 (part JL3Z17E810AB), supplying both left and right end-cap protection in black.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen your Ford F-150’s front bumper end caps are scratched, scuffed, or missing, swapping in a pair of replacement bumper guard pads restores the finished look and preserves the bumper’s exposed edges. YEHERIT’s caps are molded from high-quality plastic to match factory fit and appearance, and they install without vehicle modifications. They’re intended as OEM-style replacements for the JL3Z17E810AB parts on 2018, 2019, and 2020 F-150 models.\u003c\/p\u003e\n\n\u003ch3\u003eWill these bumper guard pads fit my 2018–2020 Ford F-150?\u003c\/h3\u003e\n\u003cp\u003eYes — these pads are made to be compatible with Ford F-150 models from 2018 through 2020 and match the OE mounting points for straightforward replacement. They correspond to the official interchange part number JL3Z17E810AB, so they’re suitable when that part is listed for your truck.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible model years: 2018, 2019, 2020 Ford F-150 \/ F150\u003c\/li\u003e\n  \u003cli\u003eInterchange part number: JL3Z17E810AB\u003c\/li\u003e\n  \u003cli\u003eIncludes both driver (left) and passenger (right) end-cap pads\u003c\/li\u003e\n  \u003cli\u003eNo aftermarket trimming or modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these YEHERIT bumper caps and what do they protect against?\u003c\/h3\u003e\n\u003cp\u003eManufactured from durable, injection-molded plastic, the YEHERIT caps resist everyday impacts and road debris that commonly mar bumper corners. They won’t make your bumper indestructible, but they help prevent scratches, chips, and cosmetic damage in common driving situations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality plastic construction for impact and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eCovers exposed bumper edges to reduce scuffs and paint damage\u003c\/li\u003e\n  \u003cli\u003eBlack finish designed to match factory-style appearance\u003c\/li\u003e\n  \u003cli\u003eReplaces worn or missing end caps to maintain resale value\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what’s included in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is designed to be simple: the caps are direct replacements that align with the original mounting points and typically snap or bolt into place. No drilling or body modifications are required, making this a quick DIY job for most owners or a short shop task.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackaged contents: left and right front bumper guard pads\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design works with original bumper hardware\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools usually suffice for installation\u003c\/li\u003e\n  \u003cli\u003eInstructions: follow factory removal steps and reverse to install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these parts match my truck’s look and finish?\u003c\/h3\u003e\n\u003cp\u003eThe parts come in a black factory-style finish intended to blend with the F-150’s original bumper styling. While color and texture are matched to typical factory caps, paint or surface treatment may vary slightly between OE batches; some owners choose to paint or coat them to exactly match a specific vehicle color.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack factory-style finish for a cohesive appearance\u003c\/li\u003e\n  \u003cli\u003eSuitable as-is for most repairs and replacements\u003c\/li\u003e\n  \u003cli\u003ePaintable surface if exact color matching is desired\u003c\/li\u003e\n  \u003cli\u003eHelps restore original bumper symmetry and profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These YEHERIT bumper guard pads are for Ford F-150 owners (2018–2020) who need a reliable, OEM-style replacement for damaged or missing front bumper end caps. They’re ideal for DIY mechanics, body shops performing cosmetic repairs, and anyone restoring a truck’s exterior appearance without altering the vehicle.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFITMENT: Compatible with 2018 2019 2020 Ford F150 F-150 Front Bumper Guard Pads\u003c\/li\u003e\n  \u003cli\u003ePART NUMBER: Bumper Guards Pad End Caps Cover Interchange Part Number JL3Z17E810AB\u003c\/li\u003e\n  \u003cli\u003eDURABLE: This front bumper guard pads are durable and made of high-quality plastic, which can provide your vehicle with excellent protection against scratches and impacts\u003c\/li\u003e\n  \u003cli\u003eEASY TO INSTALL: Replacement with the original one directly, no vehicle modifications required for installation\u003c\/li\u003e\n  \u003cli\u003ePACKAGE INCLUDED: Both Side Front Bumper Guards Pads ( Left \u0026amp; Right )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these caps fit without drilling?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. YEHERIT pads are direct-fit replacements that use the original mounting points and require no drilling or body modifications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are both left and right caps included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes both the driver (left) and passenger (right) front bumper guard pads.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67595332550841,"sku":"B0F6577DT5","price":53.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-front-bumper-guard-pads-front-view.jpg?v=1790587224"},{"product_id":"yeherit-cvt-transmission-filter-20-hole-oil-pan-gasket-kit-for-jf011e-short-mouth-filter-oil-cooler-replacement","title":"YEHERIT CVT Transmission Filter \u0026 20-Hole Oil Pan Gasket Kit for JF011E — Short‑Mouth Filter, Oil Cooler Replacement","description":"\u003cp\u003e\u003cstrong\u003eYEHERIT's 31728-1XF02 kit is a complete CVT service set that includes a short-mouth transmission filter, a 20‑hole oil pan gasket, and an oil cooler filter engineered to fit specific JF011E (RE0F10A\/RE0F10B) CVT applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit is designed for routine transmission maintenance on vehicles that use the JF011E CVT family. It addresses filtration and sealing in one package so you can replace the most common wear parts during a fluid change. Before ordering, confirm your transmission oil pan has 20 bolt holes and that your vehicle is one of the compatible model years and engines listed.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this kit fits my vehicle?\u003c\/h3\u003e\n\u003cp\u003eCompatibility hinges on two things: the JF011E (RE0F10A\/RE0F10B) CVT designation and a 20‑hole oil pan. Count the bolt holes on your transmission oil pan and cross‑check your make, model, and engine against the fitment list below. If the pan has a different hole pattern, this gasket will not match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm CVT code JF011E (RE0F10A\/RE0F10B) on service paperwork or dealer parts diagrams.\u003c\/li\u003e\n  \u003cli\u003eCount 20 bolt holes around the transmission oil pan flange.\u003c\/li\u003e\n  \u003cli\u003eCompare vehicle year and engine: Dodge Caliber 2007–2012 (2.0L\/2.4L), Jeep Compass\/Patriot 2007–2017 (2.0L\/2.4L), Mitsubishi Lancer\/Outlander models 2008–2017, Nissan Rogue\/Sentra compatible years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and what OE numbers do they replace?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies the three components commonly replaced during a CVT service: the transmission filter (short mouth), the 20‑hole oil pan gasket, and an oil cooler filter. Each piece is intended as a like‑for‑like replacement for the listed part numbers so you can maintain factory fitment and function.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTransmission filter (short mouth): replaces 31728-1XH0A, 31728-1XF02, 5191890AA, 2824A007, MD998890.\u003c\/li\u003e\n  \u003cli\u003eOil pan gasket (20 holes): replaces 31397-1XF0C, 31397-1XF0A for the 20‑hole pan.\u003c\/li\u003e\n  \u003cli\u003eOil cooler filter: replaces 31726-1XF00, 31726-1XZ0A for compatible cooling circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and performance features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe gasket is formulated to resist high temperatures and age-related hardening so it maintains a reliable seal over many service intervals. The filters use a high-density media to trap metal shavings and contaminants, protecting valves and clutch packs and helping preserve shift quality without altering transmission fluid chemistry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-temperature-resistant gasket material prevents cracking and deformation.\u003c\/li\u003e\n  \u003cli\u003eHigh-density filtering media captures fine particulates and reduces wear.\u003c\/li\u003e\n  \u003cli\u003eFactory-style dimensions for proper sealing and flow through the CVT system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install these components and when should they be replaced?\u003c\/h3\u003e\n\u003cp\u003eThese items are typically replaced during a scheduled transmission fluid service. Installation requires draining the CVT fluid, removing the oil pan, swapping the filter and cooler filter, installing the new 20‑hole gasket, then reinstalling the pan and refilling with the correct fluid to the vehicle manufacturer’s specification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDrain fluid, remove pan, replace filters, fit gasket, torque pan bolts to spec, refill fluid.\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer service intervals or any diagnostic guidance indicating contamination or flow restriction.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, have installation performed or inspected by a qualified transmission technician.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YEHERIT kit is intended for DIY mechanics and professional technicians servicing vehicles equipped with the JF011E CVT that require the 20‑hole oil pan gasket configuration. It’s suitable for owners of the listed Dodge, Jeep, Mitsubishi and Nissan models who want a complete, OE-replacement style set of parts for a transmission fluid service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this gasket fit all JF011E CVT pans?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit fits only the JF011E CVT oil pan with 20 bolt holes. Count the pan holes before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these parts OEM replacements?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit replaces the listed OE part numbers and is sized for factory fit, intended as direct replacements.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YEHERIT","offers":[{"title":"Default Title","offer_id":67595446157497,"sku":"B0GDCSXP8J","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yeherit-cvt-kit-front-packaging.jpg?v=1790587685"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/yeherit-cvt-kit-front-packaging.jpg?v=1790612601","url":"https:\/\/redleafauto.ca\/collections\/yeherit.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}