{"title":"Yinlowa","description":"\u003cp\u003eBrowse 31 Yinlowa products at RedLeaf Auto, including oil, air, cabin \u0026amp; fuel filters, body \u0026amp; trim parts and transmission \u0026amp; drivetrain. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"yinlowa-2-piece-clutch-actuator-kit-ae8z-7c604-a-for-dps6-ford-fiesta-focus-oem-fit-metal-housings","title":"Yinlowa 2-piece clutch actuator kit AE8Z-7C604-A for DPS6 Ford Fiesta \u0026 Focus — OEM-fit metal housings","description":"\u003cp\u003e\u003cstrong\u003eYinlowa 2PCS AE8Z-7C604-A is a direct-fit clutch actuator kit (A and B) designed to restore smooth DPS6 PowerShift automatic shifting on compatible Ford Fiesta and Focus models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement set contains both upper (Clutch A) and lower (Clutch B) actuator units engineered to match OEM fit and function for the 6-speed DPS6 automatic transmission. Built with precision DC motors and metal housings, the pair addresses common electronic clutch faults and helps return consistent engagement timing and shift quality. Check vehicle years and engine sizes against the fitment list before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ford models and years does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis Yinlowa kit fits Ford Fiesta and Ford Focus vehicles equipped with the 6-speed DPS6 PowerShift transmission. Verify engine displacement and model year for compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFord Fiesta: 2011–2019 with 1.0L or 1.6L engines\u003c\/li\u003e\n  \u003cli\u003eFord Focus: 2012–2018 with 2.0L engines\u003c\/li\u003e\n  \u003cli\u003eMatches OEM part numbers AE8Z-7C604-A, AE8Z7C604A and equivalents\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does replacing both actuators (A \u0026amp; B) help transmission performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing both clutch actuators together ensures synchronized clutch response and avoids uneven wear or mismatched timing that can occur when only one actuator is replaced. A matched pair helps prevent recurring faults and stabilizes gear transitions across the full shift range.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsures consistent engagement timing between clutch packs\u003c\/li\u003e\n  \u003cli\u003eReduces chances of shuddering and harsh engagements\u003c\/li\u003e\n  \u003cli\u003eHelps prevent premature failure from imbalance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat problems can this actuator kit resolve?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed to address a range of DPS6 transmission symptoms related to faulty clutch actuators. It targets electronic and mechanical causes tied to clutch actuation rather than unrelated drivetrain failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSlow or delayed shifting and poor shift quality\u003c\/li\u003e\n  \u003cli\u003eSevere shuddering or judder during engagement\u003c\/li\u003e\n  \u003cli\u003eClutch slipping, harsh engagement, and relevant fault codes (e.g., P0902, P0805, P087A)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat build quality and warranty support does Yinlowa provide?\u003c\/h3\u003e\n\u003cp\u003eThe actuators are manufactured to meet OEM specifications, using durable metal components and precision DC motors rated for under-hood temperatures and repeated cycling. Yinlowa offers a one-year warranty and customer support to help confirm fitment and troubleshoot issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-style construction and electrical connectors\u003c\/li\u003e\n  \u003cli\u003eDesigned for continuous mechanical cycling and high-temperature environments\u003c\/li\u003e\n  \u003cli\u003e1-year limited warranty and dedicated support team\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 2-piece Yinlowa clutch actuator kit is aimed at owners or technicians working on 2011–2019 Ford Fiesta and 2012–2018 Ford Focus vehicles with the DPS6 PowerShift transmission who are experiencing shifting faults, diagnostic clutch codes, or inconsistent engagement. It’s also suitable for fleet maintenance shops that prefer replacing both actuators simultaneously to ensure balanced operation and minimize repeat repairs. Always confirm the original part number and vehicle specifications prior to purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit clear transmission fault codes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Replacing the actuators can resolve actuator-related codes, but clear codes with a scanner and verify no other faults remain.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace both actuators at once?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Replacing both A and B together promotes synchronized performance and reduces repeat failures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67584851181753,"sku":"B0C9Q3CLZP","price":217.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-view-actuator-pair.jpg?v=1790456427"},{"product_id":"yinlowa-tcm-transmission-control-module-for-ford-focus-2-0l-dps6-2011-2022-direct-fit-vin-programmable","title":"Yinlowa TCM Transmission Control Module for Ford Focus 2.0L DPS6 (2011–2022) — Direct-Fit, VIN-Programmable","description":"\u003cstrong\u003eYinlowa's TCM (Transmission Control Module) is a brand-new direct-fit replacement for DPS6\/Powershift transmissions on 2011–2022 Ford Focus 2.0L vehicles that restores transmission communication and resolves common shift faults when professionally programmed to your VIN.\u003c\/strong\u003e\n\n\u003cp\u003eIf your Ford Focus with the 2.0L DPS6 Powershift transmission is showing jerky shifts, limp mode, no-start conditions, or persistent transmission fault codes, a failing TCM could be the root cause. This Yinlowa unit is engineered as a direct replacement for the original equipment control module, matching numerous OE part numbers for a precise mechanical and electrical fit. Note: this product is sold as a new control module and requires VIN-specific programming before it will operate correctly in your vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this TCM improve shifting and drivability?\u003c\/h3\u003e\n\u003cp\u003eWhen the transmission control module is functioning correctly, it manages gear changes, torque coordination, and fault diagnosis. Replacing a faulty TCM with a properly programmed Yinlowa unit restores the control signals between your engine and transmission, removing erratic behavior and stabilizing gear changes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAddresses jerky or delayed gear changes and sudden loss of drive.\u003c\/li\u003e\n  \u003cli\u003eHelps clear recurring fault codes like P0606, P0902, and U0101 when installed and flashed.\u003c\/li\u003e\n  \u003cli\u003eReduces instances of limp mode and improves fuel-efficiency consistency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need to program or flash this module before driving?\u003c\/h3\u003e\n\u003cp\u003eYes — this TCM must be programmed to your vehicle’s VIN and calibrated with the transmission software to be recognized by the car. It is not a plug-and-play replacement; skipping programming will likely produce communication errors and warning lights.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional diagnostic tools such as FORScan or dealership-level equipment are required.\u003c\/li\u003e\n  \u003cli\u003eProgramming aligns TCM parameters to your VIN, gear ratios, and calibration data.\u003c\/li\u003e\n  \u003cli\u003eWe recommend installation and flashing by an experienced technician to avoid diagnostic trouble codes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles and OE numbers does this unit fit?\u003c\/h3\u003e\n\u003cp\u003eThis Yinlowa TCM is built specifically for Ford Focus 2.0L models equipped with the DPS6 (Powershift) transmission produced between 2011 and 2022. It replaces multiple OE numbers for accurate compatibility and fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible OE references include A2C53377498, AE8Z-7Z369-[B\/D\/E\/F], KTAE8P7Z369AD, and A2C30743100–A2C30743105.\u003c\/li\u003e\n  \u003cli\u003eAlways verify your vehicle’s original OE part number and use fitment filters before ordering.\u003c\/li\u003e\n  \u003cli\u003eNot compatible unless matched to the listed DPS6 Powershift applications on the Focus 2.0L.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and warranty protections are included?\u003c\/h3\u003e\n\u003cp\u003eUnlike many refurbished control modules, this product is fully new and constructed with high-grade circuit boards and a heat-resistant housing. Factory testing targets heat, vibration, and electrical stability for long-term reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% new internal components—no remanufactured parts with hidden fatigue.\u003c\/li\u003e\n  \u003cli\u003eEngineered to resist high engine bay temperatures and vibration stress.\u003c\/li\u003e\n  \u003cli\u003eBacked by a 1-year warranty and technical support for installation or quality concerns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This transmission control module is intended for Ford Focus owners, independent repair shops, and professional technicians who need a reliable, new replacement for DPS6\/Powershift transmission issues on 2011–2022 Focus 2.0L models. Choose this unit if you require a direct OE-fit new module and can arrange professional VIN-specific programming and installation. If you need a plug-and-play or reprogrammed unit, consult a dealer or service provider to confirm required procedures before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this TCM work without programming?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The module must be flashed to your vehicle’s VIN with a diagnostic tool to function correctly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit my 2015 Ford Focus 2.0L DPS6?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if your original OE number matches the listed references and your car uses the DPS6\/Powershift transmission.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67585607532729,"sku":"B0GRW43GKK","price":701.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-tcm-front-view.jpg?v=1790474100"},{"product_id":"yinlowa-255lph-inline-fuel-pump-kit-58-psi-filter-regulator-for-ls-swap-gsl392-replacement","title":"Yinlowa 255LPH Inline Fuel Pump Kit — 58 PSI Filter-Regulator for LS Swap, GSL392 Replacement","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa 255LPH Inline Fuel Pump Kit is a complete external pump and 58 PSI filter-regulator assembly designed for returnless Gen III\/IV LS swap fuel rails, replacing GSL392-style pumps.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit combines a 255 liters-per-hour 12V external inline pump with a fixed 58 PSI filter-regulator so you can feed a returnless LS fuel rail that expects 4 bar pressure. It’s built for custom EFI plumbing on swap projects and conversions—particularly 4.8L, 5.3L and 6.0L LS installs—but requires you to confirm plumbing, hose sizes, electrical capacity and pre-filter placement before installation. The package includes common adapters and a one-year limited warranty; professional fuel-system installation is recommended.\u003c\/p\u003e\n\n\u003ch3\u003eWill this work for my LS swap with a returnless rail?\u003c\/h3\u003e\n\n\u003cp\u003eYes, when your fuel rail is designed for a fixed 58 PSI supply and your plumbing matches the included ports. This assembly mirrors the C5 Corvette-style filter-regulator layout and replaces GSL392-type external pumps used in many LS conversions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFixed 58 PSI (4 bar) output tailored to returnless LS rails.\u003c\/li\u003e\n  \u003cli\u003e255 LPH pump capacity suitable for many street and light performance engines.\u003c\/li\u003e\n  \u003cli\u003eIncludes 3\/8 in inlet, 5\/16 in return, and 6AN-to-3\/8 in outlet adapters.\u003c\/li\u003e\n  \u003cli\u003eConfirm rail pressure spec, hose diameter and plumbing orientation before buying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install it and where should the pump be mounted?\u003c\/h3\u003e\n\n\u003cp\u003eMount the pump low and close to the fuel tank when possible and use a dedicated pre-filter ahead of the unit. Proper electrical feed, a solid ground and fuel-rated hose\/clamps are essential for reliable operation; follow professional installation practices for safety and performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMount pump below and near the tank to ensure good inlet suction.\u003c\/li\u003e\n  \u003cli\u003eUse a high-quality pre-filter upstream of the pump to protect the internal strainer.\u003c\/li\u003e\n  \u003cli\u003eMatch wire gauge and fuse to the pump’s 12V current draw and routing needs.\u003c\/li\u003e\n  \u003cli\u003eSecure fittings and check for leaks under pressure after plumbing is complete.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat do the included adapters and references mean for compatibility?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit’s adapters and part references help you compare this assembly to common OE and aftermarket parts. Cross-reference the listed numbers and adapter sizes with your current components to verify fitment and avoid incompatible hose or port orientations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplaces GSL392 \/ 400-939 style external pumps (common retrofit reference).\u003c\/li\u003e\n  \u003cli\u003eFilter-regulator cross-references include WIX 33737 and ACDelco GF822 for comparison.\u003c\/li\u003e\n  \u003cli\u003eAdapters: 3\/8 in inlet, 5\/16 in return, and 6AN-to-3\/8 in outlet for common plumbing setups.\u003c\/li\u003e\n  \u003cli\u003eCompare port direction and thread sizes to your rail and hoses before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance and precautions should I follow?\u003c\/h3\u003e\n\n\u003cp\u003eRoutine inspection and replacing the pre-filter will prolong pump life and keep contaminants away from injectors. Because this is a high-pressure fuel component, always use fuel-rated hoses, proper clamps, and have a qualified technician perform pressure checks and final tuning.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplace upstream pre-filter at regular intervals based on use and fuel quality.\u003c\/li\u003e\n  \u003cli\u003eInspect fittings, hoses and electrical connections after initial runs and periodically.\u003c\/li\u003e\n  \u003cli\u003eDo not use this kit as a universal repair—ensure compatibility with your system layout.\u003c\/li\u003e\n  \u003cli\u003eFollow local regulations and safety practices when working with fuel systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Yinlowa pump-and-regulator kit is aimed at enthusiasts and professional installers building or upgrading Gen III\/IV LS-based EFI projects that require a fixed 58 PSI supply to a returnless rail. It suits swap builders installing 4.8L, 5.3L or 6.0L engines, custom conversion shops, and anyone replacing a GSL392-style external pump—provided plumbing, electrical capacity and hose choices are correct. If you need a different pressure or a return-style system, choose a component matched to those requirements.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this pump compatible with return-style fuel rails?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit is built for returnless LS rails with a fixed 58 PSI supply; return-style systems need a different regulator setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Yinlowa kit comes with a one-year limited warranty covering manufacturing defects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67585893171385,"sku":"B0B4G62GLV","price":144.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-assembly.jpg?v=1790479424"},{"product_id":"yinlowa-automatic-transmission-clutch-actuator-for-ford-dps6-6dct250-ae8z-7c604-a-direct-fit-metal-8-pin","title":"Yinlowa Automatic Transmission Clutch Actuator for Ford DPS6\/6DCT250 — AE8Z-7C604-A Direct-Fit Metal 8‑Pin","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa AE8Z-7C604-A is a direct-fit automatic transmission clutch actuator for DPS6\/6DCT250-equipped Ford Focus and Fiesta models, replacing the OE AE8Z7C604A actuator in either A or B position.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis clutch actuator is intended for vehicles fitted with the DPS6 (6DCT250) PowerShift dual-clutch transmission found on select 2012–2018 Ford Focus and 2011–2019 Ford Fiesta models. It is a single actuator unit—metal-housed with an 8-pin connector—designed as a one-to-one mechanical and electrical replacement for units with matching connector, mounting points and drive interface. This listing includes one actuator and a one-year limited warranty from Yinlowa; diagnostic work, reset tools and installation hardware are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and transmissions is this actuator compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe actuator fits DPS6\/6DCT250 dual-clutch automatic transmissions used on specific Ford Focus and Ford Fiesta years. It is not compatible with manual transmissions or other automatic transmission families. Always verify the vehicle’s transmission type and the original part number before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for select 2012–2018 Ford Focus models with DPS6\u003c\/li\u003e\n  \u003cli\u003eFits select 2011–2019 Ford Fiesta models with DPS6\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers AE8Z-7C604-A, AE8Z7C604A and AE8Z7C604\u003c\/li\u003e\n  \u003cli\u003eNot suitable for non-DPS6 transmissions or manual gearboxes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement part compare to the original OEM unit?\u003c\/h3\u003e\n\u003cp\u003eThe Yinlowa actuator is built to match the original’s mounting pattern, connector type and drive interface so it can be swapped into the same location. It is supplied as an actuator-only component, not as a TCM or clutch assembly, and it uses the same 8-pin electrical plug used on DPS6 transmissions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal housing and matched mounting points for direct replacement\u003c\/li\u003e\n  \u003cli\u003e8-pin electrical connector compatible with DPS6 wiring harnesses\u003c\/li\u003e\n  \u003cli\u003eInterchangeable for either A or B clutch actuator when physical match is confirmed\u003c\/li\u003e\n  \u003cli\u003eSold as a single unit; hardware and reset tools not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat symptoms might indicate the actuator needs replacing?\u003c\/h3\u003e\n\u003cp\u003eA failing DPS6 clutch actuator can be linked to a range of driveability issues, but those symptoms can also stem from wiring, TCM or clutch wear. Use a diagnostic scan tool to read actuator or circuit faults and visually inspect connectors and wiring before replacing parts to avoid unnecessary expense.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShuddering or vibration during acceleration\u003c\/li\u003e\n  \u003cli\u003eDelayed clutch engagement or loss of drive in certain gears\u003c\/li\u003e\n  \u003cli\u003eHarsh or erratic upshifts and downshifts\u003c\/li\u003e\n  \u003cli\u003eActuator circuit fault codes present on a scan tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and post-install procedures?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires matching the connector, mounting points and drive interface to the removed actuator. After replacement, some vehicles need actuator release\/reset and clutch adaptive-learning procedures to restore correct shift behavior; follow factory service information or have a qualified technician perform the work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare plug and mounting pattern before installing\u003c\/li\u003e\n  \u003cli\u003eMay require clutch adaptive-learning or actuator reset procedures\u003c\/li\u003e\n  \u003cli\u003eProfessional diagnosis and installation are recommended\u003c\/li\u003e\n  \u003cli\u003eThis listing excludes reset tools, installation hardware and TCM services\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Technically minded DIYers and professional technicians who are working on DPS6\/6DCT250 Ford Focus or Fiesta models and need a direct-replacement clutch actuator (position A or B) that matches OE mechanical and electrical interfaces. Buy this part if you have confirmed actuator-related fault codes, inspected wiring and clutch components, and need a single replacement actuator backed by a one-year limited warranty from Yinlowa.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this actuator replace AE8Z7C604A?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It interchanges with AE8Z-7C604-A, AE8Z7C604A and AE8Z7C604 when connector and mounting match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation plug-and-play?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Often yes for physical fit, but some vehicles require actuator reset or clutch adaptive-learning after installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67586233696441,"sku":"B0B5WG1XZ4","price":117.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-clutch-actuator-front-view.jpg?v=1790481324"},{"product_id":"yinlowa-front-left-door-latch-assembly-for-ford-f-150-f-250-f-350-bronco-1992-1997-driver-side-with-power-lock-actuator","title":"Yinlowa Front Left Door Latch Assembly for Ford F-150\/F-250\/F-350\/Bronco (1992–1997) — Driver Side with Power Lock Actuator","description":"\u003cp\u003e\u003cstrong\u003eYinlowa's Front Left Door Latch Assembly is a complete driver-side replacement that restores locking, unlocking and secure door closure for compatible 1992–1997 Ford trucks and Bronco models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement latch assembly is built to match the factory fit and function for the front left (driver-side) door on specified Ford F-150, F-250, F-350 and Bronco model years. The unit arrives as a single assembly that includes the metal latch mechanism, molded plastic housing, power lock actuator, and the associated cable and rod hardware so you can replace a worn or sticking mechanism without sourcing multiple parts. Before ordering, always compare the original part shape, cable routing, and OE reference numbers to confirm compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this latch fits my truck?\u003c\/h3\u003e\n\u003cp\u003eCheck the model years and compare the original part with the listed reference numbers. This assembly is intended for the front left (driver) side on 1992–1996 F-150 and Bronco, and 1992–1997 F-250\/F-350; it is not for the front right passenger side.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm vehicle year and front left driver-side application.\u003c\/li\u003e\n  \u003cli\u003eCompare OE numbers: replaces F4TZ-15219A65-A and F4TZ15219A65A.\u003c\/li\u003e\n  \u003cli\u003eCross-references include F2TZ-1521813-A, F2TZ-1521819-A, F3TZ-1521813-A.\u003c\/li\u003e\n  \u003cli\u003eVisually match latch shape, cable routing and connector before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the assembly include and how does that simplify installation?\u003c\/h3\u003e\n\u003cp\u003eThe package is a complete assembly that arrives with the latch, power lock actuator, cable and rod hardware already configured. That reduces the need to source separate components and minimizes fitment guesswork, though door-panel removal and reconnection of linkages are still required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePreassembled metal latch and molded housing for correct alignment.\u003c\/li\u003e\n  \u003cli\u003eIntegrated power-lock actuator to restore remote locking function.\u003c\/li\u003e\n  \u003cli\u003eIncluded cable and rod hardware for linkage reconnection.\u003c\/li\u003e\n  \u003cli\u003eDesigned to replace worn or sticking factory mechanisms in one unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability features should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe latch combines metal engagement components with a molded plastic housing engineered for repeated door cycles and exposure to automotive environments. Proper installation and periodic inspection help maintain smooth operation over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal latch components for secure engagement and wear resistance.\u003c\/li\u003e\n  \u003cli\u003eMolded plastic housing to protect internal parts from debris.\u003c\/li\u003e\n  \u003cli\u003eFactory-style cable routing to reduce binding and sticking.\u003c\/li\u003e\n  \u003cli\u003eDesigned for everyday automotive use under normal conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs there a warranty and any installation guidance?\u003c\/h3\u003e\n\u003cp\u003eThis product is backed by a one-year limited warranty. For safety and proper function, verify the part number against your original, test the latch and lock movement before reinstalling the door panel, and consult a professional if unfamiliar with door-panel removal or alignment procedures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-year limited warranty from the manufacturer.\u003c\/li\u003e\n  \u003cli\u003eCompare original part numbers and images before installation.\u003c\/li\u003e\n  \u003cli\u003eTest latch action, cable travel and lock operation prior to final reassembly.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if you lack experience with door hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This assembly is aimed at owners, mechanics and restoration shops working on 1992–1997 Ford F-150, F-250, F-350 and Bronco trucks who need a direct-fit, driver-side latch replacement that combines the metal latch, power actuator and linkages into one unit. Choose this part if you want to replace a failing or sticky driver-side latch with a single, OE-referenced assembly and prefer to avoid sourcing multiple separate components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this part fit the passenger side?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This assembly is specifically for the front left (driver) side only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace any other parts to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually no; the assembly includes latch, actuator, cable and rod, but compare your original linkages and connectors first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67587163783353,"sku":"B09JGBMP57","price":104.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-left-latch-assembly-front-view.jpg?v=1790501038"},{"product_id":"yinlowa-front-left-driver-door-lock-actuator-with-latch-for-2007-2009-gm-trucks-suvs-direct-fit-integrated-assembly","title":"Yinlowa Front Left Driver Door Lock Actuator with Latch for 2007–2009 GM Trucks \u0026 SUVs — Direct-Fit, Integrated Assembly","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa 931-303 is a direct-fit front-left driver door lock actuator with integrated latch that restores power lock function on compatible 2007–2009 GM trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your driver-side door no longer locks or unlocks reliably, makes repeated clicking noises, or needs to be operated manually, this replacement assembly combines the electric actuator and latch into one unit designed to match the factory layout. It replaces multiple OE numbers used across GM models and is built to align with the original connector, mounting points, and linkage locations. Confirm vehicle fitment and connector style before ordering to ensure a correct match.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and model years will this part fit?\u003c\/h3\u003e\n\n\u003cp\u003eThis front-left assembly fits selected GM full-size trucks and SUVs from the 2007–2009 model years. Always verify the part number and physical connector before installing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible models include Chevrolet Silverado, Tahoe, Suburban, Avalanche; GMC Sierra, Yukon, Yukon XL; Cadillac Escalade, ESV, and EXT.\u003c\/li\u003e\n  \u003cli\u003eFor 2007 Chevrolet Silverado and GMC Sierra, fitment applies to the New Body Style only.\u003c\/li\u003e\n  \u003cli\u003eCross-references include OE numbers such as 931-303 and 25876382 among others; match connector and cable layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this assembly fix common door lock problems?\u003c\/h3\u003e\n\n\u003cp\u003eThe unit replaces both the electric actuator and the mechanical latch so it addresses electrical failures and worn latch components at once. Replacing the combined assembly eliminates intermittent locking, continuous clicking, or the need to lock\/unlock by hand.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRestores electric locking and unlocking when the actuator motor has failed.\u003c\/li\u003e\n  \u003cli\u003eReplaces worn or broken latch internals that prevent secure closure.\u003c\/li\u003e\n  \u003cli\u003eStops recurring clicking noises caused by a failing actuator gear or motor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying and installing this part?\u003c\/h3\u003e\n\n\u003cp\u003eConfirming the original part details avoids returns and fitment errors. Compare the connector, pin layout, latch housing shape, and cable attachment points with your existing assembly before purchase.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eVerify OE cross-reference numbers listed on the original part and the replacement.\u003c\/li\u003e\n  \u003cli\u003eEnsure the blade-style terminal connector and linkage positions match your door harness.\u003c\/li\u003e\n  \u003cli\u003eNote that mounting hardware is not included and door-panel removal is required for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install this myself and what warranty does it include?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation requires removing the interior door panel and working with the door’s linkage and electrical connector. If you are comfortable with basic automotive repairs the job can be done at home; otherwise seek professional installation to avoid damage. Yinlowa backs this assembly with a one-year limited warranty.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProfessional installation is recommended for correct alignment and secure mounting.\u003c\/li\u003e\n  \u003cli\u003eCompare the replacement to the original before installation to confirm fit.\u003c\/li\u003e\n  \u003cli\u003eThe product includes a one-year limited warranty; contact seller support if the part arrives damaged or malfunctions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Yinlowa 931-303 front-left driver door lock actuator with latch is intended for owners and technicians working on 2007–2009 GM full-size trucks and SUVs who need a single-unit replacement for a failing power lock or damaged latch. It suits DIY mechanics comfortable with door-panel removal and professional shops that require a direct-fit unit that matches OE connector and linkage layouts. Make sure to inspect the original assembly’s OE number, connector shape, and cable attachments to guarantee proper compatibility before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this actuator fit my 2007 Chevrolet Silverado?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 2007 Silverado New Body Style front-left doors; verify your OE number, connector shape, and cable layout before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is mounting hardware included with the actuator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—mounting hardware is not supplied; door-panel removal and mounting with existing hardware are required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67587729227961,"sku":"B08CGM8Z47","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-left-assembly-front-view.jpg?v=1790515122"},{"product_id":"yinlowa-power-sliding-door-cable-kit-for-2011-2017-honda-odyssey-single-door-oe-fit-replacement-to-restore-smooth-operation","title":"Yinlowa Power Sliding Door Cable Kit for 2011–2017 Honda Odyssey — Single Door, OE-fit replacement to restore smooth operation","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa Power Sliding Door Cable Kit is a direct-fit replacement cable assembly designed to restore smooth operation to the power sliding doors on 2011–2017 Honda Odyssey models with factory power doors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Odyssey’s sliding door is slow, stalls, clicks or won’t travel fully, a worn or broken cable is a common cause. This kit replaces the cable assembly that links the existing door motor to the sliding mechanism, letting you retain the original motor and hardware. It’s sold per door (one kit repairs either the driver-side or passenger-side rear sliding door) and matches OE part numbers so you can compare before buying.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this cable kit improve a door that sticks or stops?\u003c\/h3\u003e\n\u003cp\u003eReplacing a frayed, stretched or broken cable removes a frequent mechanical bottleneck in the power sliding system. Once installed and correctly tensioned, the door should move more consistently and without the grinding or clicking noises caused by damaged cable ends.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for OE 72546-TK8-A01 to match factory routing and connection points.\u003c\/li\u003e\n\u003cli\u003eRestores cable-driven force transfer from the motor to the door rollers and latch.\u003c\/li\u003e\n\u003cli\u003eReduces intermittent stops and rough movement when the motor and track components are otherwise functional.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich models and years is this compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis cable kit fits 2011 through 2017 Honda Odyssey models with the factory-installed power sliding doors. It is not compatible with 2018 and newer Odysseys because those use a different cable design and connectors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2011–2017 Honda Odyssey 3.5L models equipped with factory power sliding doors.\u003c\/li\u003e\n\u003cli\u003eOne kit repairs one rear sliding door — order two if both doors need replacement.\u003c\/li\u003e\n\u003cli\u003eCompare the existing cable ends and OE number before purchase to confirm fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and skills are required to install the cable kit?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires interior trim removal, routing the new cable along the factory path and setting correct tension. Because power sliding door systems include electrical and mechanical parts, professional installation is recommended for those unfamiliar with these repairs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBasic mechanic tools and trim removal tools are needed; motor, rollers and brackets are not included.\u003c\/li\u003e\n\u003cli\u003eInspect motor, center roller, tracks and latch first — this kit addresses cable faults only.\u003c\/li\u003e\n\u003cli\u003eFollow correct routing and tension procedures to avoid premature wear or binding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and replacement guidance does Yinlowa provide?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a one-year warranty covering manufacturing defects, giving you short-term protection after installation. Keep the original motor and related parts for re-use; this assembly replaces the cable but not the motor, rollers or brackets.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne-year limited warranty from Yinlowa against material and workmanship defects.\u003c\/li\u003e\n\u003cli\u003eReplaces OE numbers 72546-TK8-A01 \/ 72546TK8A01; retains your factory motor assembly.\u003c\/li\u003e\n\u003cli\u003eNot a full system repair — verify other components before replacing the cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This kit is aimed at Honda Odyssey owners, fleet managers and independent mechanics who need a cost-effective, direct-fit cable replacement for one rear power sliding door on 2011–2017 3.5L models. Choose this part if the motor runs but the door exhibits slow travel, grinding noises or incomplete movement, and you plan to reuse the existing motor and hardware. If both doors need attention or the motor\/rollers are faulty, order additional parts or consult a professional for a comprehensive repair.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit both sides of the Odyssey?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Each kit fits either the driver (LH) or passenger (RH) rear sliding door; buy two kits to repair both doors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fix motor or roller problems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit replaces only the cable assembly and won’t repair faulty motors, rollers, tracks or latches.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67588036198585,"sku":"B0CGLFN1R5","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-packaging.jpg?v=1790516190"},{"product_id":"yinlowa-front-exterior-door-handle-pair-for-chevy-gmc-cadillac-trucks-suvs-textured-black-with-keyed-alike-locks","title":"Yinlowa Front Exterior Door Handle Pair for Chevy\/GMC\/Cadillac Trucks SUVs — Textured Black with Keyed-Alike Locks","description":"\u003cp\u003e\u003cstrong\u003eYinlowa front exterior door handle pair replaces factory handles and includes two keyed-alike lock cylinders, matching keys, and installation clips for compatible Chevy, GMC, Cadillac trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese Yinlowa front door handles are built as direct-fit replacements for worn or broken factory units, restoring exterior function and appearance without modifying your vehicle. Designed to match original mounting points and handle geometry, the pair comes with two lock cylinders keyed to the same supplied key, making installation and immediate use straightforward for the front left (driver) and front right (passenger) doors.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles do these handles fit?\u003c\/h3\u003e\n\u003cp\u003eThese handles are designed for specific GM trucks and SUVs from late 1990s through mid-2000s; verify your vehicle’s original part number and door location before ordering. They fit many Chevy Silverado and GMC Sierra 1500\/2500 models as well as several full-size SUVs and Cadillac trucks when used on the front doors only.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OEM numbers: 15034985, 15034986, 19356468, 19356471, 77261, 77262, GM1310129, GM1311129\u003c\/li\u003e\n  \u003cli\u003eFront truck fitment: select 1999–2006 Silverado\/Sierra 1500\/2500, 2001–2006 3500, and 2007 Classic models\u003c\/li\u003e\n  \u003cli\u003eSUV and luxury fitment: select 2000–2006 Tahoe\/Suburban, GMC Yukon\/Yukon XL, 2002–2006 Avalanche and Cadillac Escalade\/EXT, 2003–2006 Escalade ESV\u003c\/li\u003e\n  \u003cli\u003eFront doors only — not for rear doors, extended-cab rear doors, tailgate, or 2007 new-body Silverado\/Sierra\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and how are the locks keyed?\u003c\/h3\u003e\n\u003cp\u003eThe package supplies everything needed to replace both front exterior handles and secure them with matching keys, but note the new cylinders are not pre-keyed to your original vehicle key. That means you’ll receive a fresh keyed-alike pair ready for installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne left (driver) front handle and one right (passenger) front handle\u003c\/li\u003e\n  \u003cli\u003eTwo lock cylinders keyed alike plus two matching keys\u003c\/li\u003e\n  \u003cli\u003eInstallation clips to secure the handles in place\u003c\/li\u003e\n  \u003cli\u003eLock cylinder reference: 15298924 — confirm compatibility with your vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the finish and fit compare to the original equipment?\u003c\/h3\u003e\n\u003cp\u003eYinlowa offers a textured black, factory-style finish and model-specific mounting geometry to preserve the truck or SUV’s original look and operation. While designed to match OEM contours, professional installation is recommended for correct alignment and weather sealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTextured black finish mimics factory appearance\u003c\/li\u003e\n  \u003cli\u003eMounting points aligned to original design for plug-and-play fit on compatible models\u003c\/li\u003e\n  \u003cli\u003eHelps restore normal door operation without altering exterior styling\u003c\/li\u003e\n  \u003cli\u003eBacked by a 1-year limited warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre there any installation tips or limitations I should know?\u003c\/h3\u003e\n\u003cp\u003eInstallation typically follows OEM procedures, but confirm the part numbers and that you’re replacing front door handles only. If your factory key system must be retained, consider re-keying by a locksmith to match your original key, since these cylinders come pre-assembled to the supplied keys.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare original part numbers before purchase to ensure fit\u003c\/li\u003e\n  \u003cli\u003eHandles replace front-left and front-right only; not suitable for rear or tailgate use\u003c\/li\u003e\n  \u003cli\u003eMay require door panel removal and basic hand tools; professional installation recommended\u003c\/li\u003e\n  \u003cli\u003eOne-year limited warranty covers defects in materials or workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers and owners of compatible late-1990s to mid-2000s GM trucks and full-size SUVs who need a complete front-handle replacement with locks and matching keys. This kit is ideal if you want a factory-style textured black finish, correct mounting geometry, and a keyed-alike set without altering the vehicle’s exterior appearance. If you require your new cylinders keyed to an existing key, plan a re-keying step with a locksmith or dealership after purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these handles keyed to my current vehicle key?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The included cylinders are keyed alike to the supplied keys and not to your original vehicle key.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these fit rear doors or tailgates?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These handles are for front doors only and are not compatible with rear doors or tailgates.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67588213604537,"sku":"B0CC4SNV5M","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-handles-packaging-view.jpg?v=1790517259"},{"product_id":"yinlowa-rear-left-door-latch-with-handle-for-ford-e150-e250-e350-complete-oem-style-assembly-ready-to-install","title":"Yinlowa Rear Left Door Latch with Handle for Ford E150\/E250\/E350 — Complete OEM-Style Assembly, Ready-to-Install","description":"\u003cp\u003e\u003cstrong\u003eYinlowa’s rear left door latch with integrated handle is a complete replacement assembly that restores secure closing and smooth opening for the driver-side rear cargo door on compatible Ford E-Series vans.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ford E150, E250 or E350 Econoline van has a sticking or broken driver-side rear cargo door, this Yinlowa assembly combines the exterior handle, latch mechanism and the attached cable\/rod hardware to return reliable operation. The unit is manufactured to match common OEM mounting points and replaces specific OE numbers used on many 1992–2014 E-Series models; fitment for some 2015–2019 E350\/E450 vans is possible only when the original part number and door layout match.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vans and years will this rear left latch fit?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is built primarily for Ford E-Series vans produced from 1992 through 2014 with factory split rear cargo doors. Some later E350\/E450 models (2015–2019) may share the same layout, but confirm the original OE number and mounting arrangement before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 1992–2014 Ford E150, E250, E350 (Econoline\/E-Series) split rear cargo doors.\u003c\/li\u003e\n  \u003cli\u003ePossible 2015–2019 E350\/E450 fit only if OE number and mounting match.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with sliding side doors, hinged side cargo doors, or the passenger-side rear door.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I verify this is the correct replacement part?\u003c\/h3\u003e\n\u003cp\u003eMatch the OE number stamped on your old assembly and compare the handle shape, cable routing and mounting holes. Year, make and model alone may not identify the correct rear-door configuration, so visual and numerical confirmation prevents returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces OE numbers like 8C2Z-15431A03-A, 6C2Z-15431A03-AA and similar variants.\u003c\/li\u003e\n  \u003cli\u003eCheck cable\/rod locations and screw hole pattern against the removed part.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, remove the old unit and photograph the mounting before buying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does this complete latch assembly include and how does it install?\u003c\/h3\u003e\n\u003cp\u003eThe product ships as a full rear-left unit combining the exterior handle, latch body and the connected internal cable\/rod mechanism. Installation restores both the opening action and the secure latching; professional installation is recommended when door alignment or cable adjustment is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete ready-to-install assembly—handle, latch, cables\/rods all attached.\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement design intended to use existing mounting points and fasteners.\u003c\/li\u003e\n  \u003cli\u003eCompare movement and test operation before final reassembly; adjustments may be required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs there a warranty or return policy on this replacement latch?\u003c\/h3\u003e\n\u003cp\u003eYinlowa provides a one-year limited warranty against defects in materials and workmanship. Inspect and compare the new assembly with the original part prior to fitting, and test handle and latch movement during installation; professional help is advised for complex adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-year limited warranty included—covers manufacturing defects.\u003c\/li\u003e\n  \u003cli\u003eVerify fit and operation immediately; warranty does not substitute for correct part identification.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended for door alignment or cable routing issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Mechanics, fleet managers and DIY owners of older Ford E-Series vans who need an exact driver-side rear cargo door replacement will find this Yinlowa assembly practical and cost-effective. It’s aimed at vehicles with factory split rear doors where the original OE number, handle geometry and mounting pattern match; if you operate a service garage, maintain a fleet, or restore an Econoline, this part restores function without replacing the entire door.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit the right-side rear door?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This assembly is designed for the left driver-side rear cargo door only; it does not fit the right passenger-side or side doors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to match OE numbers before ordering?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Confirm the OE number and mounting pattern on your original part to ensure correct fit, especially for 2015–2019 E-Series variants.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67588532469945,"sku":"B0DYX6XCH8","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-rear-left-door-latch-front-view.jpg?v=1790519712"},{"product_id":"yinlowa-aluminum-oil-filter-housing-cap-assembly-kit-6061-t6-billet-fits-toyota-lexus-15620-31060-04152-yzza1","title":"Yinlowa Aluminum Oil Filter Housing Cap Assembly Kit — 6061-T6 Billet, Fits Toyota\/Lexus (15620-31060 \/ 04152-YZZA1)","description":"\u003cp\u003e\u003cstrong\u003eYinlowa's aluminum oil filter housing cap assembly kit replaces fragile plastic housings with a robust 6061-T6 billet cap, delivering a longer-lived, leak-resistant seal for compatible Toyota and Lexus engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eSwap out the stock plastic oil filter housing cap for a precision-machined aluminum assembly designed to withstand repeated service and resist stripping. This complete kit includes the aluminum housing, a metal drain plug cap, and a dedicated oil filter wrench so you can perform routine maintenance with confidence and fewer trips to the shop. Built to match factory dimensions and part numbers, it’s intended as a direct replacement for common OEM items while offering improved durability.\u003c\/p\u003e\n\n\u003ch3\u003eWill this housing fit my vehicle and replace my existing part?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is engineered to match OEM form and function for specific Toyota and Lexus applications. It replaces part numbers 15620-31060, 1562031060, 15643-31050, 1564331050, and 04152-YZZA1 and fits a broad range of 2.5L–5.7L engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include Toyota Camry, Highlander, RAV4, 4Runner, Sienna, Tacoma, Tundra, Avalon (various years).\u003c\/li\u003e\n  \u003cli\u003eAlso fits Lexus models such as ES350, RX350 and LS460 where those part numbers apply.\u003c\/li\u003e\n  \u003cli\u003eAlways verify fit with your vehicle VIN or manufacturer fitment tool before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the aluminum design improve oil system reliability?\u003c\/h3\u003e\n\u003cp\u003eHeat and repeated torque during oil changes can deform or crack plastic caps over time; aluminum resists those stresses. The 6061-T6 billet construction offers higher tensile strength and better resistance to thread wear than the original plastic housing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrosion-resistant aluminum reduces the chance of leaks at the cap seal.\u003c\/li\u003e\n  \u003cli\u003ePrecision threads resist stripping from overtightening.\u003c\/li\u003e\n  \u003cli\u003eMetal drain plug cap simplifies clean oil drainage without cracking concerns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and is installation straightforward?\u003c\/h3\u003e\n\u003cp\u003eThe package contains every piece needed to replace the housing and perform an oil filter change without extra tools. Installation is designed for routine DIY service or quick technician fitment, requiring standard hand tools and the included specialized oil filter wrench.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x 6061-T6 aluminum oil filter housing.\u003c\/li\u003e\n  \u003cli\u003e1x metal drain plug cap for secure oil evacuation.\u003c\/li\u003e\n  \u003cli\u003e1x dedicated oil filter wrench sized to the housing for easy removal and installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support does Yinlowa provide?\u003c\/h3\u003e\n\u003cp\u003eYinlowa backs this assembly with a 12-month warranty and customer support to address defects or fitment issues. If the part fails under normal use within the warranty period, the company offers replacement or refund options to resolve concerns quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e12-month limited warranty for manufacturing defects.\u003c\/li\u003e\n  \u003cli\u003eAfter-sales support for fitment help and troubleshooting.\u003c\/li\u003e\n  \u003cli\u003eReplacement or refund available if the product proves defective during the warranty period.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers who perform their own maintenance or professional technicians looking to replace a weak OEM plastic cap with a durable metal alternative will find this kit useful. It’s especially suited for owners of Toyota and Lexus vehicles covered by the listed part numbers who want a longer-lasting, service-friendly solution that includes the tools needed for a clean, efficient oil change.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit replace the plastic OEM oil filter housing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It directly replaces specified OEM part numbers with a stronger 6061-T6 aluminum housing for improved durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the oil filter wrench included and easy to use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a dedicated oil filter wrench designed to fit the housing and simplify removal and installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67588625924281,"sku":"B0DSKCFRB3","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-view-assembled.jpg?v=1790521355"},{"product_id":"yinlowa-front-exterior-door-handles-pair-with-lock-cylinders-keys-textured-black-abs","title":"Yinlowa Front Exterior Door Handles Pair with Lock Cylinders \u0026 Keys — Textured Black ABS","description":"\u003cp\u003e\u003cstrong\u003eThese Yinlowa front exterior door handles are a complete replacement pair with two lock cylinders and matching keys, made to restore exterior door function on select 1988–2000 Chevy, GMC and 1999–2000 Cadillac models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your truck or SUV has a broken, faded or inoperative exterior front door handle, this pair from Yinlowa gives you both left and right replacements plus two keyed lock cylinders. The set is designed to match the original exterior appearance and mounting geometry for an authentic fit on many C\/K series trucks and popular full-size SUVs. This is an aftermarket replacement — not an original GM part — engineered to duplicate factory fit and function using ABS housings and reinforced internals.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will these Yinlowa handles fit?\u003c\/h3\u003e\n\u003cp\u003eThese handles were made for specific GM pickup and SUV generations. They cover a broad range of C\/K series trucks and large SUVs; always compare the part number and handle position to your original unit before buying to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits many 1988–1999 Chevy\/GMC C1500 and K1500 models.\u003c\/li\u003e\n  \u003cli\u003eCompatible with 1988–2000 C2500, K2500, C3500 and K3500 trucks, and 1995–2000 C3500HD variants.\u003c\/li\u003e\n  \u003cli\u003eIncludes coverage for 1992–1994 Chevy Blazer, 1992–1999 C\/K Suburban, 1995–1999 Chevy Tahoe, 1992–1999 GMC Yukon, and 1999–2000 Cadillac Escalade.\u003c\/li\u003e\n  \u003cli\u003eFor 2000 Tahoe\/Yukon, verify your original part number before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and how do the keys work?\u003c\/h3\u003e\n\u003cp\u003eThis package contains both driver and passenger exterior handles plus two lock cylinders and two identical keys that operate those included cylinders only. The supplied keys are matched to the new cylinders and will not open your vehicle’s ignition or any other original locks unless you replace or rekey the vehicle’s existing lock system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne driver-side handle and one passenger-side handle in textured black finish.\u003c\/li\u003e\n  \u003cli\u003eTwo lock cylinders and two matching keys keyed to the supplied cylinders.\u003c\/li\u003e\n  \u003cli\u003eKeys do not match your factory ignition key; reuse original linkage rods and clips where possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow close is the fit and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eThe handles are built with ABS housings and strengthened internal springs to replicate factory mounting geometry and exterior appearance. Expect a textured black finish that blends with original trim; because this is an aftermarket option, small cosmetic differences from GM originals can occur.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eABS housing for weather resistance and impact toughness.\u003c\/li\u003e\n  \u003cli\u003eReinforced spring and original-style mounting geometry for reliable operation.\u003c\/li\u003e\n  \u003cli\u003eTextured black surface to match factory exterior styling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before installation and is there any warranty?\u003c\/h3\u003e\n\u003cp\u003eBefore installing, compare your current handle’s reference number and the shape of the linkage\/lock opening to this set to confirm fitment. If you’re not comfortable removing door panels or adjusting linkage, professional installation is recommended. Yinlowa backs the parts with a one-year limited warranty against defects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm original part numbers: driver (e.g., 15742229) and passenger (e.g., 15742230) options listed.\u003c\/li\u003e\n  \u003cli\u003eCompare linkage rods, clips and mounting points before replacing; reuse original hardware when applicable.\u003c\/li\u003e\n  \u003cli\u003eOne-year limited warranty from Yinlowa; professional installation advised if unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Yinlowa front handle pair is ideal for owners of late‑1980s to early‑2000s Chevy, GMC and select Cadillac trucks and SUVs who need a full front-door exterior replacement with matching lock cylinders and keys. Choose this set if you want an aftermarket solution that restores exterior door operation and maintains a factory‑style look, and be sure to match the handle position and reference numbers to your originals before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the supplied keys match my vehicle ignition key?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The keys operate only the included lock cylinders and will not match your vehicle ignition key.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these handles myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if you have door‑panel and linkage experience; otherwise professional installation is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67588711055545,"sku":"B0BD4R8YMY","price":77.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-pair-packaging.jpg?v=1790522667"},{"product_id":"yinlowa-lower-door-latch-and-handle-assembly-for-ford-e-150-e-250-e-350-e-450-passenger-40-cargo-door-direct-fit-oe-replacement","title":"Yinlowa Lower Door Latch and Handle Assembly for Ford E-150\/E-250\/E-350\/E-450 Passenger 40% Cargo Door — Direct-Fit OE Replacement","description":"\u003cp\u003e\u003cstrong\u003eThis is a replacement passenger-side lower latch and handle assembly for the smaller 40% hinged cargo door on compatible Ford Econoline\/E-Series vans, matching OE 6C2Z-15264A01-AA.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Ford E-150\/E-250\/E-350 or E-450’s passenger-side small cargo door is sticking, won’t latch, or has a cracked handle, this Yinlowa assembly is made to restore reliable opening, closing, and latching. Built as a direct-fit functional replacement that aligns with the original mounting and linkage layout, the unit combines metal and durable plastic components for everyday use. Confirm the OE number and door configuration before ordering to ensure proper fit.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this latch fits my van?\u003c\/h3\u003e\n\u003cp\u003eVerify fitment by checking the vehicle year range and the OE reference printed on your old part. This assembly fits specified E-Series models and replaces a set of known part numbers; comparing mounting points and linkage arrangement is important.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible years: 1992–2009 E-150\/E-250\/E-350 and 2002–2009 E-450 Super Duty\u003c\/li\u003e\n  \u003cli\u003eAlso fits select 1996–1999 Econoline Super Duty models\u003c\/li\u003e\n  \u003cli\u003eReplaces OE numbers: 6C2Z-15264A01-AA, 6C2Z15264A01AA, F2UZ-15264A01-A, F2UZ15264A01A\u003c\/li\u003e\n  \u003cli\u003eDesigned for the passenger-side 40% hinged cargo door lower latch only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly does this replacement restore?\u003c\/h3\u003e\n\u003cp\u003eInstalling this assembly restores the door’s mechanical function: it enables clean engagement of the latch, smooth handle operation, and secure closure. The combined handle-and-latch design replaces worn, cracked, or jammed factory parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores proper opening and closing of the 40% passenger cargo door\u003c\/li\u003e\n  \u003cli\u003eReplaces both the lower latch and the integrated handle in one unit\u003c\/li\u003e\n  \u003cli\u003eUses metal and reinforced plastic components for everyday durability\u003c\/li\u003e\n  \u003cli\u003eHelps eliminate rattles and failure caused by a damaged original part\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and hardware?\u003c\/h3\u003e\n\u003cp\u003eThe unit is supplied as the passenger-side lower latch and handle assembly; fasteners and any door linkages may need to be reused from your original part. Professional installation is recommended to ensure correct alignment and secure operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contains one passenger-side 40% hinged cargo door lower latch with handle\u003c\/li\u003e\n  \u003cli\u003eExisting fasteners or linkages from the removed assembly may be required\u003c\/li\u003e\n  \u003cli\u003eCompare images, mounting holes, and linkage layout before fitting\u003c\/li\u003e\n  \u003cli\u003eCovered by a one-year limited warranty for manufacturer defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part work instead of a sliding or rear cargo door latch?\u003c\/h3\u003e\n\u003cp\u003eNo — this assembly is specifically made for the smaller hinged 40% passenger cargo door and is not compatible with sliding side doors, the larger 60% hinged door, front doors, or rear doors. Confirm the door type visually and by part number prior to purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNot for sliding doors or rear cargo doors\u003c\/li\u003e\n  \u003cli\u003eNot compatible with front passenger or driver doors\u003c\/li\u003e\n  \u003cli\u003eSpecific to the lower latch location on the 40% hinged passenger cargo door\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Yinlowa replacement is aimed at owners, fleet managers, and mechanics working on 1992–2009 Ford E-Series vans who need a dependable, direct-fit lower latch and handle for the passenger-side 40% hinged cargo door. If you have a worn, cracked, or non-functioning latch assembly and your OE number or door layout matches the referenced part numbers, this product offers a practical repair option that restores door operation while saving a trip to the dealer.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this latch fit a sliding side door?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It fits only the passenger-side 40% hinged cargo door lower latch, not sliding or rear doors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which OE numbers does this replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces 6C2Z-15264A01-AA, 6C2Z15264A01AA and earlier F2UZ-15264A01-A variants.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67588912709817,"sku":"B09KC9ZMWT","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-assembly-overview.jpg?v=1790527610"},{"product_id":"yinlowa-ignition-lock-cylinder-assembly-for-vw-jetta-1k0905851b-complete-kit-with-key-starter-switch","title":"Yinlowa Ignition Lock Cylinder Assembly for VW Jetta 1K0905851B — Complete Kit with Key \u0026 Starter Switch","description":"\u003cp\u003e\u003cstrong\u003eComplete replacement ignition lock cylinder and starter switch assembly for select VW, Audi, Seat and Skoda models that includes a matched key.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your key sticks, won't turn smoothly, or the engine won't engage reliably, this Yinlowa ignition switch lock cylinder (part number 1K0905851B) is a direct-fit assembly designed to restore mechanical function. The kit delivers the lock housing, the cylinder, and the electrical starter switch in one unit so you replace the worn parts that cause starting and steering-lock issues. It’s built from zinc-alloy and copper contact components for consistent rotation and electrical contact.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this Yinlowa ignition lock fit?\u003c\/h3\u003e\n\u003cp\u003eThis assembly fits a range of Volkswagen Group vehicles from the mid-2000s through early 2010s. Confirm compatibility by comparing the original housing shape, connector, and part numbers before ordering to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVW: select 2005–2011 Jetta (MK5), 2004–2011 Golf, 2006–2011 Eos, 2006–2009 Rabbit, 2008–2011 Tiguan\u003c\/li\u003e\n  \u003cli\u003eAudi: select 2003–2013 A3, 2007–2010 TT, 2007–2013 R8\u003c\/li\u003e\n  \u003cli\u003eAlso fits certain Seat and Skoda models; not suitable for push-button start systems\u003c\/li\u003e\n  \u003cli\u003eCross-reference original part numbers to verify fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the kit include and how does it fix starting problems?\u003c\/h3\u003e\n\u003cp\u003eThe package is a complete ignition lock assembly intended to replace worn mechanical and electrical components that interfere with starting. Installing the new housing, cylinder and starter switch restores key rotation and ensures proper signal flow to the starter circuit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: steering lock housing, lock cylinder, ignition starter switch, and a mechanically matched key\u003c\/li\u003e\n  \u003cli\u003eReplaces worn tumblers and corroded electrical contacts that cause intermittent starts\u003c\/li\u003e\n  \u003cli\u003eZinc-alloy housing and copper contacts for smoother operation and longevity\u003c\/li\u003e\n  \u003cli\u003eCheck connectors and mounting points for an exact physical match before install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the included key work immediately with my immobilizer and remote functions?\u003c\/h3\u003e\n\u003cp\u003eThe delivered key is mechanically cut to the new cylinder but usually will require vehicle-specific programming for immobilizer recognition and remote features. Remote functions and transponder programming are not automatically paired during installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKey is mechanically matched to the cylinder out of the box\u003c\/li\u003e\n  \u003cli\u003eImmobilizer programming by a dealer or qualified locksmith is often necessary to start the engine\u003c\/li\u003e\n  \u003cli\u003eRemote fobs and keyless entry typically need reprogramming separately\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended to avoid ECU\/immobilizer errors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm the correct part and make installation smoother?\u003c\/h3\u003e\n\u003cp\u003eBefore purchase, compare your vehicle’s original part numbers, connector shape, and mounting configuration to the replacement. Proper preparation reduces installation time and avoids returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare original part numbers: 1K0905851B and related starter switch refs listed with the product\u003c\/li\u003e\n  \u003cli\u003eInspect the connector style and housing orientation on your vehicle\u003c\/li\u003e\n  \u003cli\u003eGather basic hand tools and disconnect the battery before removal\u003c\/li\u003e\n  \u003cli\u003ePlan for immobilizer\/key programming after mechanical installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: Drivers and independent technicians seeking a cost-effective, complete ignition lock replacement for mid-2000s to early-2010s Volkswagen Group vehicles. Ideal if the key sticks, won’t turn, or starting is intermittent and you prefer a single kit that replaces both the mechanical cylinder and the electrical starter switch. If you require remote function pairing or immobilizer programming, budget for professional setup after install.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replacement need programming to start my car?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The key is mechanically matched but immobilizer programming is usually required for engine start; seek a dealer or locksmith.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with push-button start models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This ignition lock assembly is not designed for push-button-start systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67588941840569,"sku":"B086367NQ8","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-assembly-ignition-lock.jpg?v=1790528469"},{"product_id":"yinlowa-ram-1500-2500-3500-column-gear-shift-bracket-68470756aa-with-integrated-interlock-solenoid-2009-2021","title":"Yinlowa Ram 1500\/2500\/3500 Column Gear Shift Bracket 68470756AA with Integrated Interlock Solenoid (2009–2021)","description":"\u003cp\u003e\u003cstrong\u003eYinlowa’s complete steering-column gear shift bracket assembly replaces OE 68470756AA and related numbers to restore secure column shifter operation on compatible Ram 1500\/2500\/3500 models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement shifter bracket is a direct-fit assembly that mounts to the steering column, includes the integrated shift interlock solenoid, and reconnects the column shifter to the shift cable. It was designed to match original dimensions and attachment points so it installs in the factory location. Before ordering, compare the OE number, connector, mounting holes and bracket shape to your removed part to confirm compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Ram models and years will this bracket fit?\u003c\/h3\u003e\n\u003cp\u003eThis bracket fits many Dodge and Ram trucks built from 2009 through 2021, excluding new-body Ram 1500s equipped with the rotary shifter. Common fits include Ram 1500, 2500 and 3500 model years listed in the OE cross-reference details. Use the OE number on your old part as the most reliable verification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 2009–2010 Dodge Ram 1500; 2010 Ram 2500\/3500\u003c\/li\u003e\n  \u003cli\u003eCompatible: 2011–2018 Ram 1500, 2500, 3500\u003c\/li\u003e\n  \u003cli\u003eCompatible: 2019–2021 Ram 1500 Classic\u003c\/li\u003e\n  \u003cli\u003eNot compatible: new-body Ram 1500 models with rotary shifter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this assembly address shifter play and other shifting problems?\u003c\/h3\u003e\n\u003cp\u003eWhen the factory bracket cracks, loosens, or the interlock solenoid fails, you can experience excessive play, a shifter that won’t stay in gear, or difficulty selecting gears. This Yinlowa assembly restores the mechanical connection between the column shifter and the shift cable and includes the interlock solenoid to re-establish normal shifting function. Professional installation is recommended if steering-column disassembly is unfamiliar.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces worn or broken bracket that causes excessive column-play\u003c\/li\u003e\n  \u003cli\u003eIncludes integrated shift interlock solenoid for reliable gear selection\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement dimensions to fit original mounting points\u003c\/li\u003e\n  \u003cli\u003eHelps restore secure positioning of the shifter arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich OE numbers does this Yinlowa part replace and how do I verify fit?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is offered as a substitute for several OE references, including 68470756AA and variants in the 5057506 series. The OE number on the original bracket is the most reliable way to confirm compatibility. Also compare the electrical connector shape, cable attachment method, and mounting-hole pattern to your removed component before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOE references covered: 68470756AA, 5057506AC\/AD\/AE\/AF\/AG\/AH\u003c\/li\u003e\n  \u003cli\u003eVerify: OE number, connector type, cable attachment, bracket shape\u003c\/li\u003e\n  \u003cli\u003eTip: Photograph the old bracket and connector to compare with the listing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what warranty support is offered?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one complete steering-column gear shift bracket assembly with the integrated shift interlock solenoid ready for installation. Yinlowa backs this part with a one-year warranty and offers fitment help if you provide vehicle year\/model, the OE number from the removed part, and clear photos of connector and mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: full shifter bracket assembly with interlock solenoid\u003c\/li\u003e\n  \u003cli\u003eWarranty: one-year limited warranty from Yinlowa\u003c\/li\u003e\n  \u003cli\u003eFitment assistance available with OE number and photos\u003c\/li\u003e\n  \u003cli\u003eRecommendation: professional installation if unfamiliar with column work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Yinlowa replacement is suited for owners or mechanics of compatible Dodge Ram and Ram trucks experiencing loose column shifters, intermittent interlock problems, or broken bracket hardware. It’s intended for those who want a direct-replacement bracket that matches OEM mounting and connector characteristics; ensure fitment by checking the OE number and connector details before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this bracket fit my 2015 Ram 2500?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it commonly fits 2015 Ram 2500. Confirm by matching the OE number and connector shape to your removed part.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the assembly include the shift interlock solenoid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the package includes the integrated shift interlock solenoid as part of the bracket assembly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67589029265593,"sku":"B0F21GSP8B","price":81.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-assembly-gear-shift-bracket.jpg?v=1790529014"},{"product_id":"yinlowa-cvt-step-motor-jf011e-re0f10a-for-nissan-altima-rogue-sentra-dodge-caliber-6-pin-direct-replacement","title":"Yinlowa CVT Step Motor JF011E\/RE0F10A for Nissan Altima Rogue Sentra Dodge Caliber — 6‑Pin Direct Replacement","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa JF011E CVT step motor is a direct-replacement ratio-control actuator designed to restore smooth CVT operation on compatible Nissan and Dodge models when the original JF011E\/RE0F10A step motor is worn or failed.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement CVT step motor is engineered for specific transmissions (JF011E\/RE0F10A family) used in several Nissan and Dodge vehicles from the late 2000s to early 2010s. It’s intended as a like-for-like part: same connector style, six-pin electrical interface, and construction materials suited for transmission service. Before ordering, verify the transmission code, original part number, and connector to ensure proper fit. Professional diagnosis and installation are strongly recommended because CVT systems require correct calibration and relearn after service.\u003c\/p\u003e\n\n\u003ch3\u003eWill this step motor fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eFitment depends on the transmission code and not just the model year. This unit fits vehicles equipped with the JF011E\/RE0F10A CVT; similar-looking transmissions (for example JF010E or JF015E families) use different parts and are not compatible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerified vehicle applications: 2009–2012 Nissan Altima 2.5L, 2009–2012 Nissan Rogue 2.5L, 2007–2012 Nissan Sentra 2.0L\/2.5L, 2007–2012 Dodge Caliber 2.0L.\u003c\/li\u003e\n  \u003cli\u003eCross-reference numbers: 31947-1XA00, 31947-1XF00, 52-0722, 212452A.\u003c\/li\u003e\n  \u003cli\u003eConfirm transmission tag\/part number and connector pin layout before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part function within the CVT?\u003c\/h3\u003e\n\u003cp\u003eThe step motor precisely positions an internal valve that controls the CVT ratio mechanism. By moving incrementally based on transmission control signals, it adjusts hydraulic flow to achieve target speed ratios; a faulty motor can cause drivability symptoms that mimic other CVT issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperates the ratio-control valve inside the valve body.\u003c\/li\u003e\n  \u003cli\u003eSix-pin electrical connection translates control signals to fine mechanical movement.\u003c\/li\u003e\n  \u003cli\u003eConstructed from alloy-steel and copper for durability in transmission service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and what else will I need?\u003c\/h3\u003e\n\u003cp\u003eSupply includes one Yinlowa CVT step motor only; it does not come with the valve body, solenoids, gasket, filters, fluid, or installation hardware. Installing or replacing this motor typically requires transmission disassembly, cleaning, and a CVT relearn or reset by a qualified technician.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: one JF011E\/RE0F10A-compatible CVT step motor with 6-pin connector.\u003c\/li\u003e\n  \u003cli\u003eNot included: valve body components, fluid, gaskets, or mounting hardware.\u003c\/li\u003e\n  \u003cli\u003eRecommended: diagnostic confirmation of fault codes and professional installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow can I avoid buying the wrong CVT motor?\u003c\/h3\u003e\n\u003cp\u003eBecause many CVT step motors look similar, match multiple identifiers before purchase. Compare the transmission family (JF011E\/RE0F10A), original part number, connector shape, and physical dimensions to prevent fitment mistakes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not rely on vehicle year alone—check the transmission code on the tag.\u003c\/li\u003e\n  \u003cli\u003eCompare the original part number and connector pin count\/layout.\u003c\/li\u003e\n  \u003cli\u003eContact seller with vehicle VIN and transmission stamp for fitment help; one-year warranty applies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers and professional technicians who need a direct-replacement CVT ratio-control motor for Nissan Altima, Rogue, Sentra or Dodge Caliber models equipped with the JF011E\/RE0F10A transmission. Choose this Yinlowa unit when diagnostics point to a failed step motor and you’ve confirmed transmission family, connector type, and cross-reference part numbers. If you’re unsure, provide the vehicle’s VIN and transmission tag details to the seller or have a shop verify fitment and perform the required CVT relearn after installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this motor fit a 2010 Nissan Altima?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 2010 Altima only if the transmission is JF011E\/RE0F10A—confirm the transmission tag, connector, and original part number.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is installation hardware included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The motor ships alone; valve body parts, gaskets, fluid, and hardware are not included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67589592023225,"sku":"B08GX3PZ5N","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-jf011e-front-view.jpg?v=1790530934"},{"product_id":"yinlowa-cvt-stepper-motor-for-nissan-jf010e-jf009e-6-pin-direct-replacement-3-5l-ratio-control","title":"Yinlowa CVT Stepper Motor for Nissan JF010E \/ JF009E — 6‑Pin Direct Replacement, 3.5L Ratio Control","description":"\u003cp\u003e\u003cstrong\u003eYinlowa's 3.5L CVT stepper motor is a direct-replacement ratio-control motor designed to fit Jatco JF009E and JF010E valve bodies used in many Nissan CVT applications when the original 6-pin motor has failed.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis stepper motor controls pulley ratio changes inside compatible CVT valve bodies and is built to match the 6-pin connector and 2-bolt bracket of the specified JF009E \/ JF010E assemblies. It replaces parts referenced RE0F08A, RE0F08B, RE0F09A and RE0F09B, but it is not compatible with other Jatco codes such as JF011E\/RE0F10A or JF015E\/RE0F11A. Before purchasing, confirm the transmission code and physically compare the connector, mounting and motor shape to the unit you remove.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know this stepper motor fits my Nissan?\u003c\/h3\u003e\n\u003cp\u003eFitment is determined by the transmission code printed on the valve body, the connector type and the bracket style. Year, model and engine are helpful but not definitive; many Murano, Altima, Maxima, Quest, Versa and Cube models used these valve bodies when equipped with the listed CVTs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm transmission codes: JF009E or JF010E.\u003c\/li\u003e\n  \u003cli\u003eVerify 6-pin electrical connector and 2-bolt mounting bracket.\u003c\/li\u003e\n  \u003cli\u003eCompare motor shape and dimensions with removed unit before install.\u003c\/li\u003e\n  \u003cli\u003eDo not use for JF011E\/RE0F10A or JF015E\/RE0F11A valve bodies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat symptoms indicate the stepper motor may need replacement?\u003c\/h3\u003e\n\u003cp\u003eA failing ratio control motor can produce drivability warnings related to pulley ratio control, but identical symptoms may stem from wiring, valve body wear, or other CVT issues. Diagnose the full CVT system before replacing the motor to avoid unnecessary parts replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePossible fault codes: P1777 or P1778 in some vehicles.\u003c\/li\u003e\n  \u003cli\u003eObserved symptoms: hesitation, abnormal ratio changes, or limp mode activation.\u003c\/li\u003e\n  \u003cli\u003eAlso inspect wiring harness, connectors and valve body for wear or damage.\u003c\/li\u003e\n  \u003cli\u003ePressure loss or internal CVT damage can mimic motor failure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this Yinlowa motor installed and what should I prepare?\u003c\/h3\u003e\n\u003cp\u003eThe assembly is provided in an installation-ready configuration with the correct 6-pin connector and two-bolt bracket for the specified valve bodies. Professional installation and following the vehicle manufacturer's service procedure are strongly recommended to ensure proper function and avoid fluid contamination or damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse correct CVT fluid and torque specifications per OEM manual.\u003c\/li\u003e\n  \u003cli\u003eCompare connector pins, bracket location and motor body to the removed unit.\u003c\/li\u003e\n  \u003cli\u003eClean the valve body area, replace filter components as required.\u003c\/li\u003e\n  \u003cli\u003eIf uncertain, consult a transmission specialist for diagnosis and fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the package include and what warranty is offered?\u003c\/h3\u003e\n\u003cp\u003eThe product ships as a single replacement CVT stepper motor packaged for protection and ready for comparison with the original part prior to installation. Yinlowa backs the unit with a one-year limited warranty and offers fitment support if you provide vehicle details and a photo of the original motor.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 1 Yinlowa CVT stepper motor for JF009E\/JF010E.\u003c\/li\u003e\n  \u003cli\u003eWarranty: one-year limited coverage from date of purchase.\u003c\/li\u003e\n  \u003cli\u003eFitment support: provide year, model, engine, transmission code and original-part photo.\u003c\/li\u003e\n  \u003cli\u003eInspect connector and bracket before final installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians and independent owners who need a reliable replacement ratio-control motor for Nissan vehicles equipped with Jatco JF009E or JF010E CVTs. This unit is intended for those who can confirm transmission code and connector compatibility, or for professional shops diagnosing CVT ratio-control faults and performing valve-body repairs. If you cannot verify the valve body code or connector style, seek a visual confirmation or expert assistance before ordering to ensure correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this motor fit my 2010 Nissan Altima 3.5L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Possibly—confirm your transmission code is JF009E or JF010E and that the motor uses a 6-pin connector and 2-bolt bracket before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include installation hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No extra hardware is included; the motor ships ready to compare and install using the valve body's existing mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67589592088761,"sku":"B07XH2JTHF","price":83.81,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-motor-assembly.jpg?v=1790530936"},{"product_id":"yinlowa-rear-door-latch-actuator-for-toyota-sequoia-2001-2007-4-7l-v8-preassembled-latch-cable","title":"Yinlowa Rear Door Latch Actuator for Toyota Sequoia 2001-2007 (4.7L V8) - Preassembled Latch \u0026 Cable","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa rear door latch actuator with attached cable is a direct-fit replacement assembly engineered to restore reliable opening, latching, and power-lock function on 2001–2007 Toyota Sequoia rear liftgates.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement kit combines the latch mechanism, electric lock actuator and the control cable into one preassembled unit designed specifically for Sequoia models with the 4.7L V8 engine (SR5 and Limited trim). It is intended to swap in for worn or failing rear hatch latch components that cause hard-to-open liftgates, incomplete latching, or intermittent power locking. Check your original connector shape, mounting points and part numbers to ensure compatibility before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this assembly fix a stubborn or unreliable liftgate?\u003c\/h3\u003e\n\u003cp\u003eThe integrated latch and actuator replace worn internal linkages and an aging motor so the handle movement reliably operates the latch and the power lock responds consistently. Replacing the whole unit corrects mechanical binding and restores the correct cable routing that can prevent partial latching.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes latch, actuator and attached control cable to eliminate mismatched parts.\u003c\/li\u003e\n  \u003cli\u003eReplaces common failure points that cause sticking or incomplete closure.\u003c\/li\u003e\n  \u003cli\u003eRestores both manual handle operation and electrical lock function.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my Toyota Sequoia?\u003c\/h3\u003e\n\u003cp\u003eThis assembly is made for 2001 through 2007 Toyota Sequoia vehicles equipped with the 4.7L V8 engine, including SR5 and Limited models. It is not intended for Sequoia models from 2008 or later—confirm your OE numbers and connector layout before ordering to avoid mismatches.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMatches OE references 931-861 \/ 931861 for the latch assembly.\u003c\/li\u003e\n  \u003cli\u003eCorresponds to latch part numbers 69301-0C010 \/ 693010C010 and cable 64680-0C010 \/ 646800C010.\u003c\/li\u003e\n  \u003cli\u003eCompare electrical connector, cable routing and mounting ears against your original part.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included and what should I expect during installation?\u003c\/h3\u003e\n\u003cp\u003eThe package ships with one complete rear liftgate latch assembly, actuator and the attached control cable. Installation requires removal of the interior liftgate trim and basic hand tools; professional installation is recommended if you are not comfortable with panel removal and electrical connectors.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne preassembled rear latch mechanism with integrated actuator and cable.\u003c\/li\u003e\n  \u003cli\u003eRequires interior trim removal; door panel clips and fasteners must be handled carefully.\u003c\/li\u003e\n  \u003cli\u003eTest locks and handle operation before reattaching trim to confirm correct installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part compare to replacing only the motor or cable?\u003c\/h3\u003e\n\u003cp\u003eReplacing the entire latch assembly reduces the risk of leaving worn mating components that can cause premature failure or improper operation. A complete assembly ensures factory alignment and cable routing, which is often more reliable than mixing old and new parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-aligned assembly reduces adjustment steps during installation.\u003c\/li\u003e\n  \u003cli\u003eAvoids compatibility issues from reusing a worn latch or corroded bracketry.\u003c\/li\u003e\n  \u003cli\u003eOne-year limited warranty from Yinlowa covers manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Yinlowa rear door latch actuator with cable is for Toyota Sequoia owners (2001–2007, 4.7L V8, SR5\/Limited) who are experiencing sticking, intermittent power-lock failures, or difficulty latching the rear hatch and who want a single, vehicle-specific assembly to restore smooth operation. Mechanics and DIY enthusiasts who can remove interior liftgate trim and verify OE numbers will find this a direct replacement option that brings the latch, actuator and cable back to reliable service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with 2008 Sequoia models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This assembly fits 2001–2007 Toyota Sequoia 4.7L V8 models only, not 2008 or newer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the actuator motor and cable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It ships as a single unit with the latch, electric actuator and attached control cable included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67591169278137,"sku":"B092HBVCN6","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-rear-latch-front-view.jpg?v=1790543019"},{"product_id":"yinlowa-rear-right-cargo-door-latch-for-1992-2014-ford-e150-e250-e350-complete-direct-fit-assembly","title":"Yinlowa Rear Right Cargo Door Latch for 1992–2014 Ford E150\/E250\/E350 — Complete Direct-Fit Assembly","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa rear right cargo door latch is a complete mechanical replacement assembly designed to restore reliable opening and secure closing for 1992–2014 Ford E150, E250 and E350 rear swing-out cargo doors.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ready-to-install latch assembly replaces the worn or damaged rear right (passenger-side) cargo door latch, and includes the latch housing, release cable and connecting rod supplied as a single unit. It matches the original equipment form and function for the specified Econoline years and models, simplifying repairs without hunting for separate components.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this latch fix common rear door problems?\u003c\/h3\u003e\n\u003cp\u003eIf your rear swing-out cargo door sticks, won't release consistently, or won't stay securely closed, replacing the mechanical latch often solves the issue. The assembly replaces the latch, cable and rod simultaneously, removing wear points and restoring consistent mechanical action.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces worn latch components that cause sticking or intermittent release.\u003c\/li\u003e\n  \u003cli\u003eIncludes cable and rod to ensure proper linkage and travel.\u003c\/li\u003e\n  \u003cli\u003eMatches OE mounting points for a direct-fit installation on specified years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this part fit my Ford van and how do I verify compatibility?\u003c\/h3\u003e\n\u003cp\u003eThis product fits 1992–2014 Ford E150, E250 and E350 Econoline cargo and passenger vans with rear swing-out doors — specifically the rear right (passenger-side) cargo door only. Before ordering, compare the OE numbers and physical details to your original part to avoid fitment mistakes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck the vehicle year, model and that your van has a rear swing-out cargo door.\u003c\/li\u003e\n  \u003cli\u003eCompare OE references 6C2Z-15431A02-AA, 8C2Z-15431A02-C or AC2Z-15431A02-A with your part.\u003c\/li\u003e\n  \u003cli\u003eInspect latch housing, mounting points, cable end and rod connection against listing images.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the assembly include and what does it not include?\u003c\/h3\u003e\n\u003cp\u003eThis listing supplies the full mechanical rear right cargo door latch assembly: the latch mechanism, release cable and connecting rod. It does not include any electric lock actuator, motor, or additional door hardware — professional installation is recommended if you are unsure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDelivered as a single, ready-to-install mechanical assembly.\u003c\/li\u003e\n  \u003cli\u003eNo electric actuator or motor included; mechanical operation only.\u003c\/li\u003e\n  \u003cli\u003eIntended as a direct replacement for the passenger-side rear cargo door.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the Yinlowa latch?\u003c\/h3\u003e\n\u003cp\u003eYinlowa backs this rear right cargo door latch with a one-year warranty against manufacturing defects from the purchase date. For warranty service, contact Yinlowa through your order channel and provide vehicle year, model, installation position and order details to expedite assistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-year limited warranty covering manufacturing defects.\u003c\/li\u003e\n  \u003cli\u003eCustomer support via the original order platform for claims.\u003c\/li\u003e\n  \u003cli\u003eKeep your vehicle and purchase details handy for faster help.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers, fleet managers and independent mechanics who own or service 1992–2014 Ford E150, E250 or E350 vans with rear swing-out cargo doors and need a reliable passenger-side rear door latch replacement. Choose this assembly if you want an OE-referenced, all-in-one mechanical solution (latch, cable and rod) to restore dependable door operation without sourcing multiple parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this latch fit the sliding side door?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This assembly fits the rear right (passenger-side) swing-out cargo door on 1992–2014 E150, E250, E350 models only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is an electric actuator included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This product is a mechanical latch assembly and does not include any electric lock actuator or motor.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67591212007609,"sku":"B08Y5TXWMT","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-rear-right-latch-front-view.jpg?v=1790543904"},{"product_id":"yinlowa-side-door-latch-assembly-for-ford-e150-e250-e350-right-60-passenger-door-integrated-cable-direct-fit","title":"Yinlowa Side Door Latch Assembly for Ford E150\/E250\/E350 — Right 60% Passenger Door, Integrated Cable \u0026 Direct-Fit","description":"\u003cp\u003e\u003cstrong\u003eYinlowa Side Door Latch 8C2Z-15264A00-B is a complete right-side 60% hinged passenger door latch assembly designed to restore reliable opening and closing on compatible Ford E150, E250 and E350 Econoline vans.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement assembly includes the upper latch, integrated cable and connecting rod engineered to match the original mounting layout and cable routing for the passenger-side 60% hinged door. It's intended as a direct-fit repair part when the original latch binds or the cable has stretched or failed. Before installing, confirm your van’s year, door type and OE number to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this latch fits my Econoline van?\u003c\/h3\u003e\n\n\u003cp\u003eVerify fit by checking the vehicle model years, door style and OE reference numbers. This part fits Ford E150, E250 and E350 vans with the passenger-side 60% hinged side door built between 1992 and 2019. It will not fit sliding side doors, rear cargo doors, driver-side 40% hinged doors or E450 models.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompare the part location and the original latch assembly on your vehicle.\u003c\/li\u003e\n  \u003cli\u003eMatch OE numbers: 8C2Z-15264A00-B or superseded 8C2Z-15264A00-D and variants.\u003c\/li\u003e\n  \u003cli\u003eConfirm your van’s model year falls in the 1992–2019 range.\u003c\/li\u003e\n  \u003cli\u003eInspect cable routing and latch position against your existing part.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included and what will I need separately?\u003c\/h3\u003e\n\n\u003cp\u003eThe shipment contains the upper side door latch with its integrated cable and connecting rod—everything required to replace a failed upper latch assembly. Mounting hardware is not included unless shown in the specific product listing, so you may need retainers or bolts from your original assembly or purchase fasteners separately.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncluded: upper latch, integrated cable, connecting rod—preassembled for direct replacement.\u003c\/li\u003e\n  \u003cli\u003eNot included: mounting bolts and door-panel trim pieces unless noted in the listing.\u003c\/li\u003e\n  \u003cli\u003eRetain old fasteners if they are undamaged or source OE-grade hardware if needed.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if you lack experience with door latch mechanisms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part relate to original Ford OE numbers?\u003c\/h3\u003e\n\n\u003cp\u003eThis assembly replaces several Ford original numbers and aligns with the later superseded reference 8C2Z-15264A00-D. Use the OE number to confirm a match and check cable routing visually to ensure proper fitment with your original door assembly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eReplaces: 8C2Z-15264A00-B, 8C2Z-15264A00-D and listed variants.\u003c\/li\u003e\n  \u003cli\u003eThe 8C2Z-15264A00-D is a later superseding number—match carefully.\u003c\/li\u003e\n  \u003cli\u003eInspect original parts to confirm latch position and routing before ordering.\u003c\/li\u003e\n  \u003cli\u003eContact the seller with your OE number for additional verification if unsure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat durability and warranty terms should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe latch uses metal components and a protected cable housing designed for repeated use in commercial and daily-driving environments. Yinlowa backs the product with a one-year warranty against manufacturing defects; be sure to verify vehicle compatibility before installing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstruction: metal latch parts with shielded cable housing for dependable operation.\u003c\/li\u003e\n  \u003cli\u003eDesigned for vans seeing frequent door cycles and light commercial use.\u003c\/li\u003e\n  \u003cli\u003eWarranty: one-year coverage from Yinlowa—contact via your order page for support.\u003c\/li\u003e\n  \u003cli\u003eRecommend verifying fitment and OE number prior to installation to avoid returns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Yinlowa side door latch assembly is intended for owners, fleet operators and mechanics who need a reliable replacement for a worn or broken upper passenger-side 60% hinged door latch on 1992–2019 Ford E150, E250 or E350 Econoline vans. It’s a suitable repair solution for vehicles where the original cable has stretched, become damaged, or where the latch mechanism no longer operates smoothly, and for anyone seeking a direct-replacement assembly that mirrors the original mounting layout. If you’re unsure about fitment or lack experience with door hardware, consider professional installation to ensure correct alignment and secure mounting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this latch fit my E350 Econoline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your E350 has the passenger-side 60% hinged side door and is a 1992–2019 model; match the OE number to be sure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the assembly include mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—mounting bolts are generally not included; retain your original fasteners or source replacements if needed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67591212073145,"sku":"B0BFKQ4NBF","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-latch-assembly.jpg?v=1790543906"},{"product_id":"yinlowa-rear-left-upper-cargo-door-latch-with-cable-for-ford-e-series-1998-2009-driver-side-oe-fit","title":"Yinlowa Rear Left Upper Cargo Door Latch with Cable for Ford E-Series 1998-2009, Driver Side OE Fit","description":"\u003cp\u003e\u003cstrong\u003eYinlowa's rear left upper cargo door latch with cable is a direct-fit replacement for the driver-side upper latch on select 1998–2009 Ford E150, E250, E350 and 2002–2009 E450 Econoline vans, restoring proper rear split-door operation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your van's left upper rear cargo door sticks, fails to latch, or requires extra force to open, a worn latch assembly and cable are common causes. This Yinlowa assembly replaces the metal latch, attached release cables, cable ends and protective foam in one unit. It matches the original equipment (OE) mounting and cable interfaces noted in compatible part references so you can swap it in without changing unrelated door hardware.\u003c\/p\u003e\n\n\u003ch3\u003eWill this latch fit my Ford E-Series van?\u003c\/h3\u003e\n\u003cp\u003eFitment is based on model year, door position and the OE reference number on your original part. This assembly is made for the rear left (driver-side) upper position on split cargo doors; it is not intended for right-side, side cargo or front doors. Always compare the physical shape, cable ends and OE number before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 1998–2009 E150, E250, E350; 2002–2009 E450 (split rear doors)\u003c\/li\u003e\n  \u003cli\u003eEarlier 1992–1997 fit only if OE number matches listed references\u003c\/li\u003e\n  \u003cli\u003eReplaces OE 6C2Z-1543286-AA and compatible F2UZ\/F8UZ references\u003c\/li\u003e\n  \u003cli\u003eCheck driver-side upper rear location and cable termination style\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this part restore rear door operation?\u003c\/h3\u003e\n\u003cp\u003eThe assembly replaces both the latch mechanism and its release cables so mechanical linkage and catch function are renewed. A fresh metal latch and intact cable ends reduce binding, ensure consistent engagement, and make opening and closing smoother. The included foam and factory-style cable terminations help keep noise down and alignment correct.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete latch plus attached release cables for one installation\u003c\/li\u003e\n  \u003cli\u003eProtective foam reduces rattle and cushions the assembly\u003c\/li\u003e\n  \u003cli\u003eDirect replacement geometry for original mounting points\u003c\/li\u003e\n  \u003cli\u003eHelps eliminate sticking, poor latching, or inconsistent door closure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying and installing?\u003c\/h3\u003e\n\u003cp\u003eConfirm the door is the rear left upper (driver-side) latch and compare the OE number printed on your old latch to the listed replacements. Inspect cable end styles, mounting holes and latch orientation to ensure a match. If you have limited repair experience, plan for basic hand tools and consider professional installation to avoid door alignment issues.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify vehicle year, model and split-door configuration\u003c\/li\u003e\n  \u003cli\u003eMatch OE number: 6C2Z-1543286-AA, F2UZ-1543286-A, F8UZ-1543286-AA\u003c\/li\u003e\n  \u003cli\u003eCompare cable ends and mounting hole pattern to original part\u003c\/li\u003e\n  \u003cli\u003eSeek professional installation if unfamiliar with latch replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and is there a warranty?\u003c\/h3\u003e\n\u003cp\u003eThe package contains the metal upper latch assembly with attached release cables, cable ends and protective foam as shown. Because it is supplied as a ready-to-install unit, you avoid sourcing separate cable fittings or small hardware. Yinlowa covers this assembly with a one-year warranty against manufacturing defects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete upper rear left latch with cables and foam included\u003c\/li\u003e\n  \u003cli\u003eReady for direct replacement of the original assembly\u003c\/li\u003e\n  \u003cli\u003eOne-year limited warranty for manufacturing defects\u003c\/li\u003e\n  \u003cli\u003eNo unrelated door components are supplied (mounting bolts not guaranteed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: installers, fleet managers and owners of Ford E150, E250, E350 and E450 Econoline vans who need a reliable, OE-referenced replacement for a failing driver-side upper rear cargo door latch. This part suits anyone looking to restore proper split-door operation without replacing the entire door or unrelated hardware—verify fitment and OE number before purchase and consult a mechanic if you need help with alignment or installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this latch fit both rear cargo doors on E-Series vans?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This part is specifically for the rear left (driver-side) upper latch on split cargo doors only.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which OE numbers does this Yinlowa latch replace?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It replaces OE 6C2Z-1543286-AA and compatible references like F2UZ-1543286-A and F8UZ-1543286-AA.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67591212138681,"sku":"B0DC6D6C6X","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-assembly-view.jpg?v=1790543904"},{"product_id":"yinlowa-air-filter-for-honda-pioneer-1000-1000-5-2016-2021-17215-hl4-a02-direct-fit-high-capacity-pleated-media","title":"Yinlowa Air Filter for Honda Pioneer 1000 \/ 1000‑5 (2016–2021) — 17215‑HL4‑A02 Direct-Fit, High-Capacity Pleated Media","description":"\u003cp\u003e\u003cstrong\u003eThis Yinlowa air filter is a direct-fit replacement for Honda Pioneer 1000 and Pioneer 1000‑5 models (2016–2021), delivering high-capacity particle filtration and two sealing O‑rings for a reliable airbox seal.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you ride a Honda Pioneer off-road, clean intake air is essential to maintain engine performance and longevity. The Yinlowa 17215‑HL4‑A02 replacement air filter is engineered to meet the original equipment airflow profile while increasing dust-holding capacity through multi-layer pleated media. It’s supplied with two rubber O‑rings to ensure a leak-free installation and comes with a one‑year limited warranty for added confidence.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this filter match my Honda Pioneer’s specifications?\u003c\/h3\u003e\n\u003cp\u003eThis element is manufactured to replace OEM part numbers 17215‑HL4‑A02 and 17215‑HL4‑AK0 and fits listed Pioneer model codes from 2016 to 2021. The dimensions and intake volume are set to align with Honda’s original airbox geometry so the fit and airflow characteristics remain consistent.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for OEM 17215‑HL4‑A02 \/ 17215‑HL4‑AK0\u003c\/li\u003e\n\u003cli\u003eCompatible with SXS1000M3 \/ SXS1000M3P \/ SXS1000M3D \/ SXS1000M3L\u003c\/li\u003e\n\u003cli\u003eAlso fits SXS1000M5P \/ SXS1000M5D \/ SXS1000M5L Pioneer 1000‑5 models\u003c\/li\u003e\n\u003cli\u003eDesigned to maintain factory intake volume and fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat filtration benefits does the pleated media offer on trails?\u003c\/h3\u003e\n\u003cp\u003eThe filter uses multi-layer pleated paper media that traps fine dust, sand, and silt while still allowing steady airflow under load. That balance helps the engine breathe smoothly during towing, hill climbs, or extended trail runs without quickly choking from collected debris.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh dirt-holding capacity reduces how often you need to replace the element\u003c\/li\u003e\n\u003cli\u003ePleated construction increases surface area for more effective particle capture\u003c\/li\u003e\n\u003cli\u003eMaintains consistent airflow for stable throttle response\u003c\/li\u003e\n\u003cli\u003eReduces abrasive particles reaching internal components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre O‑rings and installation details included?\u003c\/h3\u003e\n\u003cp\u003eYes — the package comes with two durable rubber O‑rings to seal the junction between the filter and the airbox. Proper sealing prevents bypass air and ensures all intake air is routed through the filtration media, which is critical for protection and performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes 1 filter element + 2 sealing O‑rings\u003c\/li\u003e\n\u003cli\u003eRubber O‑rings engineered for a tight mechanical seal\u003c\/li\u003e\n\u003cli\u003eSimple swap-in installation using factory mounting points\u003c\/li\u003e\n\u003cli\u003eFollow Honda service manual torque and seating instructions for best results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this filter affect engine performance or service intervals?\u003c\/h3\u003e\n\u003cp\u003eThe Yinlowa element is built to preserve factory airflow characteristics so you should experience similar throttle response and engine behavior as with OEM parts. Because of higher dirt capacity, you may be able to extend interval frequency compared with less effective aftermarket elements, but inspect based on riding conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaintains original intake volume for balanced air‑fuel delivery\u003c\/li\u003e\n\u003cli\u003eHelps prevent abrasive wear to cylinders and pistons by trapping contaminants\u003c\/li\u003e\n\u003cli\u003eInspection frequency depends on dust levels and usage patterns\u003c\/li\u003e\n\u003cli\u003eReplace when media is clogged, torn, or after recommended service hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and service technicians who own a 2016–2021 Honda Pioneer 1000 or Pioneer 1000‑5 and need a reliable, OEM‑matched replacement air filter that offers improved dirt capacity and comes with necessary sealing O‑rings. It’s suited for owners who want straightforward fitment, consistent engine breathing, and protection against trail dust without altering factory airflow dynamics.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace OEM 17215-HL4-A02 exactly?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It directly replaces OEM 17215‑HL4‑A02 and 17215‑HL4‑AK0 and fits the listed 2016–2021 Pioneer models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the sealing O‑rings included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes two rubber O‑rings to ensure a tight airbox seal during installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67591413432505,"sku":"B0B1VBP9KF","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-filter-front-view.jpg?v=1790550174"},{"product_id":"yinlowa-spin-on-fuel-filter-water-separator-for-bobcat-replaces-7023589-7400454-integrated-drain-valve","title":"Yinlowa spin-on Fuel Filter Water Separator for Bobcat — replaces 7023589\/7400454, integrated drain valve","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa 7023589 spin-on fuel filter water separator removes suspended particles and sheds water from diesel fuel before it reaches Bobcat engine components.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement fuel filter is built to match the Bobcat part numbers 7023589 and the updated 7400454, providing a straightforward service solution for compatible compact loaders, excavators and work machines. It includes an integrated drain valve for easy water removal and is intended as a like-for-like service part when connector, drain position and mounting layout align with your machine.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Bobcat models will this filter fit?\u003c\/h3\u003e\n\n\u003cp\u003eThis filter fits a broad range of Bobcat T-series, S-series and select excavator and Toolcat models when those machines reference part numbers 7023589 or 7400454. Always compare physical dimensions, mounting orientation and drain location before purchase to confirm compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTop-series fitments: T770, T650, T590, T740, T595, T550, T630, T750, T450, T870.\u003c\/li\u003e\n  \u003cli\u003eS-series and loaders: A770; S450, S510, S530, S550, S570, S590, S595, S630, S650, S740, S750, S770, S850.\u003c\/li\u003e\n  \u003cli\u003eExcavators and Toolcats: E32, E35, E42, E45, E50, E55, E85; 5600, 5610, UW53; V519, V723, V923.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the integrated drain valve simplify maintenance?\u003c\/h3\u003e\n\n\u003cp\u003eThe built-in drain valve lets operators remove separated water without removing the filter assembly, speeding inspections and reducing spills. It supports routine servicing in field conditions and minimizes the need for extra tools during fluid checks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eQuick water evacuation through the valve for on-site checks.\u003c\/li\u003e\n  \u003cli\u003eNo special removal tools required for routine draining.\u003c\/li\u003e\n  \u003cli\u003eSimplifies troubleshooting when fuel contamination is suspected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this replace both 7023589 and 7400454, and are there installation notes?\u003c\/h3\u003e\n\n\u003cp\u003eYes—the item corresponds to 7023589 and can replace assemblies listed as 7400454, but 7400454 is an updated, sometimes larger, version. Some first-time installations may need an updated mounting bracket or two worm-drive clamps; inspect your current mount and included parts before installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e7400454 is the newer replacement designation; dimensions can differ.\u003c\/li\u003e\n  \u003cli\u003eCheck bracket fit and clamp requirements prior to fitting.\u003c\/li\u003e\n  \u003cli\u003eCovered by a one-year limited warranty for manufacturing defects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance benefits does this filter provide for the fuel system?\u003c\/h3\u003e\n\n\u003cp\u003eThis spin-on separator helps protect fuel injectors and pumps by capturing particles and shedding entrained water that can cause wear or corrosion. While it is not a cure-all, correct filtration extends component life and reduces the risk of fuel-related downtime when serviced regularly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRemoves suspended contaminants before they reach sensitive parts.\u003c\/li\u003e\n  \u003cli\u003eSeparates and drains water that can impair combustion and cause corrosion.\u003c\/li\u003e\n  \u003cli\u003eDesigned for routine replacement intervals in heavy equipment fleets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Contractors, rental operators and fleet mechanics who service Bobcat compact loaders, excavators and Toolcat machines and need a direct-fit spin-on fuel filter water separator that matches OEM part references. If your machine references 7023589 or 7400454 and the drain-valve position and mounting layout match, this Yinlowa unit is a practical replacement to maintain fuel-system protection during regular service cycles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this filter directly compatible with Bobcat 7400454?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it replaces 7023589 and corresponds to 7400454, but check dimensions and drain position—7400454 may be larger.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the filter require tools to drain water?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are needed; the integrated drain valve allows on-site water removal without removing the filter.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67591551418553,"sku":"B08CXNCV31","price":69.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-view-filter.jpg?v=1790555060"},{"product_id":"yinlowa-trunk-button-81260-2v010-for-2012-2017-hyundai-veloster-direct-fit-rear-hatch-release-for-factory-rearview-camera-models","title":"Yinlowa Trunk Button 81260-2V010 for 2012–2017 Hyundai Veloster — Direct-Fit Rear Hatch Release for Factory Rearview-Camera Models","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa Trunk Button 81260-2V010 is a direct-fit exterior hatch release switch designed to restore manual trunk opening for 2012–2017 Hyundai Veloster models with the factory rearview-camera hatch.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Veloster’s exterior trunk button is cracked, sticky, melted, or intermittent, this replacement assembly provides the correct plug-and-mount layout to return the outside release to working order. It matches the factory mounting pattern and electrical connector used on Veloster Base and Turbo models equipped with a 1.6L gasoline engine and original rearview-camera hatch configuration. VIN verification and a visual match of connector and housing are advised before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this part match my Veloster’s original equipment?\u003c\/h3\u003e\n\u003cp\u003eThis Yinlowa unit replaces OE number 81260-2V010 (also listed as 812602V010) and is built to align with the original tailgate garnish mounting and electrical interface. It is not a generic button; it’s a vehicle-specific outside handle lock assembly for the rear hatch.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect-replacement plug and mounting layout for the original position\u003c\/li\u003e\n  \u003cli\u003eDesigned for Veloster Base and Turbo 1.6L gas models with factory rear camera\u003c\/li\u003e\n  \u003cli\u003eMatches housing shape and connector location for straightforward swap\u003c\/li\u003e\n  \u003cli\u003eVIN check recommended; 81260-2V000 is a different, incompatible configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill installing this fix an unresponsive hatch?\u003c\/h3\u003e\n\u003cp\u003eReplacing a damaged or worn exterior release pad often restores normal trunk access when the problem is isolated to the switch assembly. If the hatch remains inoperable after swapping the button, further diagnostic steps are required to find issues with fuses, wiring, latch actuator, or latch alignment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePressing the exterior pad sends the release signal to the existing rear latch\u003c\/li\u003e\n  \u003cli\u003eInspect fuse and wiring if the replacement does not resolve the issue\u003c\/li\u003e\n  \u003cli\u003eCheck actuator and latch alignment as other potential causes\u003c\/li\u003e\n  \u003cli\u003eProfessional diagnosis recommended when electrical faults are suspected\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about fitment and installation?\u003c\/h3\u003e\n\u003cp\u003eThe part is made to fit into the original tailgate garnish without cutting or splicing when matched to the correct vehicle configuration. Hardware and camera components from your original assembly can often be reused, and professional installation is recommended to ensure proper alignment and electrical connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces the exterior hatch release switch\/outside handle lock assembly only\u003c\/li\u003e\n  \u003cli\u003eReuse original fasteners and camera parts when required by your vehicle\u003c\/li\u003e\n  \u003cli\u003eNo cutting or splicing when the connector and mount match your original unit\u003c\/li\u003e\n  \u003cli\u003eProfessional install reduces risk of alignment or electrical issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the package include and what warranty is offered?\u003c\/h3\u003e\n\u003cp\u003eEach package contains one rear hatch release switch\/outside handle lock assembly ready for installation. Yinlowa backs this part with a one-year warranty covering fitment and functional defects; verify the replacement visually against your original before installing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eContents: one rear hatch release switch\/outside handle assembly\u003c\/li\u003e\n  \u003cli\u003eConfirm connector, mounting points, and housing shape before install\u003c\/li\u003e\n  \u003cli\u003eCovered by a 1-year warranty—contact Yinlowa with order details if issues arise\u003c\/li\u003e\n  \u003cli\u003eDo not order by appearance alone; OE number verification recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This replacement is intended for owners and technicians working on 2012–2017 Hyundai Veloster Base and Turbo vehicles with a 1.6L gasoline engine and factory rearview-camera hatch who need an exact-fit exterior trunk release button. It’s suitable for DIY mechanics comfortable with exterior trim removal and electrical connector swaps, and for professional installers seeking a factory-configuration replacement part. Always confirm your original part’s connector, mounting, and OE number (81260-2V010 \/ 812602V010) before ordering to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compatible with all 2012–2017 Veloster models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 2012–2017 Veloster Base and Turbo models with 1.6L gas engines and a factory rearview-camera hatch. Verify the OE number 81260-2V010 and connector before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will swapping this part fix a hatch that still won't open?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Only if the exterior switch was the issue. If the hatch remains stuck, check fuses, wiring, the actuator, and latch alignment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67591921893561,"sku":"B08319ZY1K","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-trunk-button-front-assembly.jpg?v=1790560110"},{"product_id":"yinlowa-aluminum-oil-filter-housing-cap-assembly-direct-fit-for-toyota-lexus-2006-2019-pre-installed-o-ring-cnc-machined","title":"Yinlowa Aluminum Oil Filter Housing Cap Assembly — Direct-Fit for Toyota \u0026 Lexus 2006–2019, Pre‑installed O‑Ring, CNC‑Machined","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa Upgraded Aluminum Oil Filter Housing Cap Assembly is a direct-fit, heavy-duty replacement with a pre-installed O-ring that prevents oil leaks and withstands heat better than the OEM plastic cap.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis CNC-machined aluminum oil filter housing cap assembly replaces common factory part numbers and is engineered for fitment across many Toyota and Lexus models from mid-2000s to late 2010s. It includes the main aluminum housing cap plus the matching metal drain plug cap and a high-grade rubber O-ring pre-installed to provide a secure, leak-resistant seal. Designed for mechanics and DIYers, the assembly aims to reduce the routine failures associated with brittle plastic caps while offering a straightforward swap during oil service.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cap prevent oil leaks compared with the original plastic part?\u003c\/h3\u003e\n\n\u003cp\u003eThe pre-installed rubber O-ring and metal-to-metal tolerance from CNC machining deliver a more consistent sealing surface than molded plastic that can warp or strip. Aluminum resists heat-related deformation, keeping seal compression stable across temperature cycles.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003ePre-installed high-grade rubber O-ring for a secure, leak-resistant seal.\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminum face for precise sealing geometry.\u003c\/li\u003e\n\u003cli\u003eBetter heat tolerance than OEM plastic to reduce warping and oil seepage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles will this Yinlowa assembly fit and how confident can I be about compatibility?\u003c\/h3\u003e\n\n\u003cp\u003eThis assembly is manufactured to replace factory part numbers 15620-31060, 1562031060, 15643-31050, and 1564331050 and fits a wide range of Toyota and Lexus models across 2006–2019 model years. Verify your vehicle’s part number against those listed to ensure a direct fit; the product is tailored to match OEM dimensions for plug-and-play replacement.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eFits Toyota Camry (2007–2019), Highlander (2008–2019), RAV4 (2006–2019).\u003c\/li\u003e\n\u003cli\u003eCompatible with Sienna, Tacoma, Tundra, 4Runner across listed years.\u003c\/li\u003e\n\u003cli\u003eAlso works with Lexus RX350, ES350, RX450h models in specified years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill an aluminum cap last longer and is installation difficult for DIYers?\u003c\/h3\u003e\n\n\u003cp\u003eAluminum offers greater strength and heat resistance than the brittle plastic used in many OEM caps, reducing the chance of cracking or thread stripping during routine maintenance. Installation is straightforward: remove the original cap, swap components, and torque per manufacturer recommendations. The kit arrives ready to install, including the lower metal drain plug cap for a complete service swap.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eDurable CNC aluminum construction resists cracking and heat damage.\u003c\/li\u003e\n\u003cli\u003eComplete kit includes aluminum cap and matching drain plug cap for one-step replacement.\u003c\/li\u003e\n\u003cli\u003eSimple, plug-and-play installation for routine oil changes—no special tools required beyond common shop tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat if the part doesn’t fit or develops a defect?\u003c\/h3\u003e\n\n\u003cp\u003eYinlowa backs the assembly with a 1-year warranty and US-based customer support to address fitment or defect concerns. Reach out to support for troubleshooting, replacement, or warranty service if needed within the coverage period.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e1-year warranty covering manufacturing defects and fitment issues.\u003c\/li\u003e\n\u003cli\u003eUS-based customer support for quick resolution and guidance.\u003c\/li\u003e\n\u003cli\u003eClear steps for replacement or return under warranty terms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: mechanics, fleet managers, and independent vehicle owners who routinely perform oil changes and want a long-lasting replacement for OEM plastic caps. If you want to lower the chance of oil drips, avoid repeated purchases of fragile caps, and keep maintenance quick and reliable, this upgraded Yinlowa aluminum housing cap assembly is designed for that role.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace a plastic oil filter housing cap?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It replaces specific OEM plastic caps (15620-31060, 15643-31050, etc.) with a CNC aluminum unit and a pre-installed O-ring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the Yinlowa assembly covered by warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The product includes a 1-year warranty and US-based customer support for fitment or defect issues.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67592132526265,"sku":"B08CXKVCS8","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-aluminum-cap-front-view.jpg?v=1790561815"},{"product_id":"yinlowa-rear-trunk-latch-actuator-for-toyota-camry-2007-2011-direct-fit-power-keyless","title":"Yinlowa Rear Trunk Latch Actuator for Toyota Camry 2007-2011 — Direct-Fit Power\/Keyless","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa rear trunk latch actuator is a direct-fit electric latch assembly that restores power trunk lock and release for 2007–2011 Toyota Camry models equipped with factory power\/keyless-entry trunk release.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Camry’s trunk no longer responds to the key fob, interior release switch, or fails to latch securely, this replacement actuator assembly is built to match factory mounting points and electrical connections so you can bring the trunk back to normal operation without modifying the vehicle. It replaces common OE numbers and comes with a limited one-year warranty for added confidence.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Camry years and configurations does this part fit?\u003c\/h3\u003e\n\u003cp\u003eThis actuator is intended for 2007, 2008, 2009, 2010 and 2011 Toyota Camry vehicles that have the factory power or keyless-entry trunk release option. It is not compatible with manual-latch Camrys, models from 2006 or earlier, or 2012-and-later redesigns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFitment: 2007–2011 Toyota Camry with factory power\/keyless-entry trunk release.\u003c\/li\u003e\n  \u003cli\u003eNot for: manual-latch Camrys or non-power trunk configurations.\u003c\/li\u003e\n  \u003cli\u003eCheck your vehicle year and original connector before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm this actuator matches my original part?\u003c\/h3\u003e\n\u003cp\u003eCompare the original part number, connector type and latch shape before purchasing; production variations can affect fit. This unit replaces several common OE numbers, but visual confirmation prevents returns and ensures a correct fit the first time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces: 64600-06010, 6460006010, 64600-33120, 6460033120, 931-860, 931860.\u003c\/li\u003e\n  \u003cli\u003eVerify: matching electrical connector, latch silhouette and mounting points.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, provide vehicle year and a clear photo of the connector for verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does installation involve and what’s included?\u003c\/h3\u003e\n\u003cp\u003eThe actuator is designed as a factory-style direct replacement to simplify installation in the original rear trunk-lid location. Expect a like-for-like swap of the latch assembly; professional installation is recommended if you are not experienced with trunk hardware or vehicle wiring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: one rear trunk lock latch actuator assembly.\u003c\/li\u003e\n  \u003cli\u003eNot included: release cable, special mounting hardware or trim fasteners—reuse existing parts where applicable.\u003c\/li\u003e\n  \u003cli\u003eMounting: matches factory points and electrical connector for straightforward replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support are available?\u003c\/h3\u003e\n\u003cp\u003eThis product is backed by a one-year limited warranty to cover manufacturing defects. For fitment assistance or installation questions, provide the vehicle year, original part number and a clear photo of the connector so application can be checked before you install the part.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWarranty length: one-year limited coverage.\u003c\/li\u003e\n  \u003cli\u003eSupport: fitment checks with year and connector photo prior to replacement.\u003c\/li\u003e\n  \u003cli\u003eReturns: follow seller policy if a mismatch occurs despite pre-checks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Drivers and mechanics who need a dependable replacement for a non-functioning power trunk on 2007–2011 Toyota Camry models. Choose the Yinlowa actuator when you want a direct-fit assembly that restores keyfob and interior release operation, matches common OE numbers, and includes a one-year limited warranty for peace of mind.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this actuator work on a 2006 Camry?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This actuator fits 2007–2011 Camry models with factory power\/keyless-entry only, not 2006 or earlier models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include the release cable and mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The package includes one actuator assembly; release cable and extra mounting hardware are not included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67592513323193,"sku":"B083SJ859T","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-front-packaging-trunk-actuator.jpg?v=1790564982"},{"product_id":"yinlowa-rear-hatch-handle-for-honda-fit-2007-2013-1-5l-direct-fit-external-assembly","title":"Yinlowa Rear Hatch Handle for Honda Fit 2007–2013 (1.5L) — Direct-Fit External Assembly","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa 74810-S6A-003 rear hatch handle is a direct-fit exterior handle assembly engineered to restore the rear hatch release on 2007–2013 Honda Fit 5‑door models with the 1.5L L4 engine.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Honda Fit’s back hatch handle is cracked, jammed, or broken, this replacement assembly is designed to match the original part number and form so you can operate the existing latch again. It replaces the OEM reference 74810-S6A-003 (also written 74810S6A003 or 74810 S6A 003) and is intended for Fit and Fit Sport rear hatch applications in the listed years. This listing is for the external handle assembly only; it does not include the full latch, actuator, release cable, or interior trim components.\u003c\/p\u003e\n\n\u003ch3\u003eWill this handle fit my 2009 Honda Fit?\u003c\/h3\u003e\n\u003cp\u003eCompatibility depends on year, body style, engine, and the original handle’s shape or OE reference. The Yinlowa handle fits 2007–2013 Honda Fit 5‑door models equipped with the 1.5L L4 motor when the factory rear handle matches the listed reference.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits Honda Fit and Fit Sport 5‑door models, 2007–2013.\u003c\/li\u003e\n  \u003cli\u003eEngine compatibility: 1.5L L4 only.\u003c\/li\u003e\n  \u003cli\u003eVerify your original part number or physical handle appearance before ordering.\u003c\/li\u003e\n  \u003cli\u003eNot compatible if your hatch uses a different latch or an integrated lock actuator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this replacement restore hatch operation?\u003c\/h3\u003e\n\u003cp\u003eInstalled as the external release point, the handle re-establishes the mechanical connection to your existing latch so you can open the rear hatch normally. It’s designed to mate with the factory latch mechanism and reuse original mounting hardware where applicable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces broken, loose, or non‑functioning exterior hatch handles.\u003c\/li\u003e\n  \u003cli\u003eInterfaces with the vehicle’s existing latch assembly — no new latch required.\u003c\/li\u003e\n  \u003cli\u003eShips as a single complete handle assembly ready for installation.\u003c\/li\u003e\n  \u003cli\u003eInspect fit before removing protective packaging to ensure proper match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect in the package and after purchase?\u003c\/h3\u003e\n\u003cp\u003eThe product ships as one exterior rear hatch handle assembly intended as a like-for-like replacement for the OEM part number. Yinlowa provides a one‑year manufacturer warranty and recommends checking the part against the original prior to installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes: 1 rear hatch handle assembly (external handle only).\u003c\/li\u003e\n  \u003cli\u003eWarranty: one year from purchase; contact Yinlowa via your order channel for support.\u003c\/li\u003e\n  \u003cli\u003eInstruction: compare part shape and mounting points with the original before starting work.\u003c\/li\u003e\n  \u003cli\u003eDoes not include trim, latch, actuator, or cables unless pictured separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation complexity is moderate and typically requires basic hand tools and some interior access to the hatch. If you’re comfortable removing interior panels and unfastening a few bolts, you can replace the handle yourself; otherwise a shop can complete the swap quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools commonly needed: screwdriver set, socket wrench, panel trim tool.\u003c\/li\u003e\n  \u003cli\u003ePlan to retain or reuse OEM fasteners when possible.\u003c\/li\u003e\n  \u003cli\u003eAllow time to test latch operation and ensure secure mounting after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This Yinlowa 74810‑S6A‑003 replacement is aimed at Honda Fit owners (2007–2013 5‑door, 1.5L) who need a reliable exterior hatch handle that matches the OEM reference. It’s a practical choice for DIY mechanics, independent repair shops, and anyone replacing a cracked or nonfunctional rear hatch handle without replacing the entire latch or actuator assembly. Verify your vehicle year, body style, and original handle design before ordering to ensure a correct match.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this handle fit all Honda Fit years?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits 2007–2013 Honda Fit 5‑door models with the 1.5L L4 engine; verify your original handle shape and OE number first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the latch or actuator included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — this listing is for the exterior rear hatch handle assembly only, not the latch, actuator, or cables.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67593045934265,"sku":"B07YB2YX36","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-rear-hatch-handle-front-view.jpg?v=1790571351"},{"product_id":"yinlowa-engine-cabin-air-filter-kit-for-honda-acura-3-5l-3-0l-pleated-engine-filter-activated-carbon-cabin","title":"Yinlowa Engine \u0026 Cabin Air Filter Kit for Honda\/Acura 3.5L \u0026 3.0L — Pleated Engine Filter + Activated-Carbon Cabin","description":"\u003cp\u003e\u003cstrong\u003eYinlowa's two-piece replacement kit includes a vehicle-specific engine air filter and an activated-carbon cabin filter designed for select Honda and Acura 3.5L\/3.0L models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a compatible Honda Pilot, Passport, Ridgeline, or Acura MDX and want a single maintenance purchase that refreshes both engine intake protection and in-cabin air quality, this kit pairs a pleated engine filter sized to factory specifications with a multi-layer cabin element featuring activated carbon. Each filter is matched to common OE part numbers to simplify identification and installation; check model years and engine types before ordering to confirm fit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and engines will this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is built for specific model years and engines, so confirming year and engine is essential. It fits Honda Pilot 3.5L (2016–2022), Honda Passport 3.5L (2019–2025), Honda Ridgeline 3.5L (2017–2026), and Acura MDX 3.5L (2016–2020), plus MDX Hybrid 3.0L (2017–2020). It is not compatible with 2014–2015 MDX, Pilot models from 2023 onward, Passport 2026, or MDX 2022 and newer; verify shape and part references before purchase.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExact fit for specific 3.5L and 3.0L model years listed above\u003c\/li\u003e\n  \u003cli\u003eNot for later-generation or earlier MDX and Pilot models outside range\u003c\/li\u003e\n  \u003cli\u003eCheck part numbers against your vehicle's manual or existing filters\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these filters protect the engine and cabin?\u003c\/h3\u003e\n\u003cp\u003eThe engine air filter uses high-capacity pleated media to block road dust, grit, and debris from entering the intake, helping maintain efficient airflow and reduce contaminant buildup. The cabin filter combines fine media layers with activated carbon to trap pollen, soot, dust, and many common odors before they circulate through the HVAC system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePleated engine media supports consistent airflow while capturing particles\u003c\/li\u003e\n  \u003cli\u003eActivated-carbon cabin layer reduces odors and volatile compounds\u003c\/li\u003e\n  \u003cli\u003eAirflow-direction marking makes cabin installation straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat replacement numbers and cross-references should I check?\u003c\/h3\u003e\n\u003cp\u003eThe kit is produced to match widely used OE and aftermarket reference numbers so it’s easy to confirm compatibility. The engine filter cross-references include 17220-5J6-A10, CA12061, SA12061 and similar codes, while the cabin element matches 80292-SDA-407, CF10134, CP134 and related numbers. Use these part numbers to compare with your current filters or dealership references.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEngine filter: 17220-5J6-A10 \/ CA12061 and equivalents\u003c\/li\u003e\n  \u003cli\u003eCabin filter: 80292-SDA-407 \/ CF10134 and equivalents\u003c\/li\u003e\n  \u003cli\u003eHandy for owners comparing OEM labels or maintenance records\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow often should I replace the filters and what warranty is included?\u003c\/h3\u003e\n\u003cp\u003eReplace filters according to your vehicle’s maintenance schedule or sooner if you frequently drive in dusty or polluted environments. The kit contains one engine filter and one cabin filter for a single maintenance event, and Yinlowa backs the product against manufacturing defects for one year.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFollow manufacturer service intervals or inspect more often in harsh conditions\u003c\/li\u003e\n  \u003cli\u003eReplace both filters together for coordinated maintenance\u003c\/li\u003e\n  \u003cli\u003eOne-year warranty for manufacturing defects from Yinlowa\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This kit is ideal for owners of the listed Honda and Acura models who prefer a direct, vehicle-specific replacement set that restores engine intake protection and cabin air cleanliness in one purchase. It’s a practical option for DIY maintenance or for technicians preparing a routine service, provided you confirm your vehicle year, engine type, and the existing filter shape before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my 2018 Honda Pilot 3.5L?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit fits 2016–2022 Honda Pilot 3.5L models. Confirm your vehicle's engine and filter shape before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are both filters included and is there a warranty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit includes one engine filter and one cabin filter, and Yinlowa provides a one-year manufacturing defect warranty.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67593310666937,"sku":"B0H299SJ4B","price":69.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-engine-filter-front-view.jpg?v=1790574407"},{"product_id":"yinlowa-ignition-switch-actuator-pin-924-704-direct-fit-oe-replacement-zinc-alloy-spring","title":"Yinlowa ignition switch actuator pin 924-704 — direct-fit OE replacement, zinc-alloy spring","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa 924-704 ignition switch actuator pin is a direct-fit replacement assembly that reconnects the key lock cylinder to the ignition switch so the vehicle can crank properly when the original actuator fails.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your key turns and the dash lights come on but the engine doesn't start, a worn or broken actuator pin inside the steering column is a common cause. Yinlowa's 924-704 actuator pin assembly is designed to match factory alignment and restore the mechanical linkage between the key cylinder and the electrical ignition switch for a wide range of Chrysler, Dodge, Jeep and Plymouth vehicles. This listing covers fitment notes, part-number alternatives, and installation considerations so you can confirm compatibility before purchase.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles and years will this actuator pin fit?\u003c\/h3\u003e\n\u003cp\u003eThis actuator pin fits many Chrysler-group vehicles produced in the late 1990s and early 2000s. Always verify your vehicle’s year, make, model and body style and compare the original part number and actuator housing shape to ensure a correct match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models include Jeep Wrangler (1997–2006), Liberty (2002–2007), Cherokee (1997–2001) and Grand Cherokee (1999–2004).\u003c\/li\u003e\n  \u003cli\u003eAlso fits Chrysler PT Cruiser (2001–2005), Cirrus (1996–2000), Prowler (2001–2002), Sebring convertible (1996–2006) and Sebring sedan (2001–2006).\u003c\/li\u003e\n  \u003cli\u003eDodge fitment includes Neon (1995–2005), Stratus sedan (1996–2006), Breeze (1996–2000) and Prowler (1999–2001).\u003c\/li\u003e\n  \u003cli\u003eNot compatible with Sebring or Stratus coupe models; check column configuration carefully.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I confirm the correct replacement part number?\u003c\/h3\u003e\n\u003cp\u003eCompare the part numbers printed on your original actuator and the shape of the actuator housing before ordering. Yinlowa’s unit replaces several original numbers, but column variations mean visual confirmation is essential.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplacement references: 924-704, 924704, SK924704 and OEM cross-references like 4690492AB, 4664099, 4690592AA.\u003c\/li\u003e\n  \u003cli\u003eOther linked numbers include 4690492AC, 4690492AD, 4690493, 4690591AA and 4690495AB.\u003c\/li\u003e\n  \u003cli\u003eCompare both the original part number and the actuator housing shape to avoid ordering the wrong configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does this actuator pin restore and how is it constructed?\u003c\/h3\u003e\n\u003cp\u003eThe actuator pin re-establishes the mechanical connection that moves the ignition switch when the key is turned, enabling the starter circuit to engage. Yinlowa’s assembly combines metal actuator components with a molded housing and a steel spring to match OE-style alignment and durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eZinc-alloy actuator components for robust wear resistance and alignment retention.\u003c\/li\u003e\n  \u003cli\u003eMolded housing to match column geometry and position the pin precisely.\u003c\/li\u003e\n  \u003cli\u003eIncludes steel spring and retainers; package contains one complete assembly with spring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about installation and safety?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires partial steering-column disassembly and careful reassembly of the spring and retainers in their original positions. If you’re not experienced with steering-column work, professional installation is recommended to avoid damaging column components or misaligning the ignition switch.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecord the position of the original spring, retainers and switch before removing components.\u003c\/li\u003e\n  \u003cli\u003eSteering-column removal or access panels may be required depending on model and year.\u003c\/li\u003e\n  \u003cli\u003eIf unsure, seek a technician experienced in steering-column or ignition-system service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Yinlowa 924-704 actuator pin is intended for DIY mechanics, indie repair shops and fleet technicians who need an OEM-style replacement for diagnosed actuator failures on supported Chrysler, Dodge, Jeep and Plymouth vehicles. It’s ideal for users who can confirm part numbers and column shape, and who will either perform careful steering-column work themselves or arrange professional installation. The product is backed by a one-year limited warranty; contact Yinlowa through your order for fitment or warranty assistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this actuator pin fit my 2003 Jeep Liberty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the 924-704 fits 2002–2007 Jeep Liberty models, but confirm your original actuator housing shape and part number first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this the ignition lock cylinder or the electrical switch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — this is the mechanical actuator pin assembly that links the key cylinder to the electrical ignition switch.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67594677289145,"sku":"B07VTMKQZS","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-actuator-pin-front-view.jpg?v=1790584657"},{"product_id":"yinlowa-vacuum-switching-valve-vsv-for-toyota-lexus-oe-25860-62010-direct-replacement-single-unit","title":"Yinlowa Vacuum Switching Valve VSV for Toyota Lexus OE 25860-62010 — Direct Replacement, Single Unit","description":"\u003cstrong\u003eYinlowa 25860-62010 is a direct-replacement vacuum switching valve (VSV) engineered to match Toyota and Lexus OE 25860-62010 function, connector and two-port vacuum layout.\u003c\/strong\u003e\n\n\u003cp\u003eThis replacement VSV solenoid restores controlled vacuum routing in emissions and intake systems on confirmed Toyota and Lexus models. Built to the original electrical and mounting footprint, the Yinlowa unit is intended for vehicles where the original part number, connector shape and port orientation match the listed OE references. It ships as a single valve and is backed by a one-year warranty; however, correct selection requires comparing your vehicle’s existing valve to avoid fitment errors.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I confirm this VSV fits my Toyota or Lexus?\u003c\/h3\u003e\n\u003cp\u003eFitment can vary by year, engine, trim and emissions options, so visual and part-number checks are essential. Compare the original part number, electrical connector, mounting bracket and the two vacuum ports to ensure compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify original OE number: 25860-62010 (also listed as 2586062010)\u003c\/li\u003e\n  \u003cli\u003eMatch the connector shape and pin layout exactly\u003c\/li\u003e\n  \u003cli\u003eConfirm bracket location and vacuum-port orientation\u003c\/li\u003e\n  \u003cli\u003eUse vehicle-specific fit tools or dealer references as needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles commonly accept this replacement valve?\u003c\/h3\u003e\n\u003cp\u003eThis VSV is designed to replace the referenced OE unit on many Toyota and Lexus applications, but not every vehicle in each model year will use the same part. Always match the valve physically to your original to prevent ordering the wrong item.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eToyota examples: select 1992–2006 Camry, 1995–2005 Avalon, 1998–2006 Sienna\u003c\/li\u003e\n  \u003cli\u003eAlso fits select 1999–2006 Solara and 2001–2007 Highlander\u003c\/li\u003e\n  \u003cli\u003eLexus examples: select 1992–2003 ES300 and 2004–2006 ES330\u003c\/li\u003e\n  \u003cli\u003eAlso fits select 1999–2003 RX300, 2004–2006 RX330 and 2002–2005 SC430\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat function does this vacuum switching valve perform underhood?\u003c\/h3\u003e\n\u003cp\u003eThe valve controls vacuum routing within emissions-related systems and certain intake components, opening and closing vacuum paths when energized. When the factory VSV fails, symptoms may include diagnostic trouble codes and related driveability issues, but the valve is one of several components that can cause similar faults.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOpens and closes vacuum flow to emissions or intake devices\u003c\/li\u003e\n  \u003cli\u003eReplaces factory valve when diagnosed as the faulty component\u003c\/li\u003e\n  \u003cli\u003eMatches OE electrical and vacuum-port layout for direct swap\u003c\/li\u003e\n  \u003cli\u003eRequires correct diagnosis—codes can have multiple causes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes with the Yinlowa replacement and what support is provided?\u003c\/h3\u003e\n\u003cp\u003eEach package contains a single VSV solenoid designed as an OE-style replacement. Yinlowa offers a one-year warranty and advises comparing the original valve to ensure accurate fit and reduce returns.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 1 vacuum switching valve solenoid ready for installation\u003c\/li\u003e\n  \u003cli\u003eSupported by a one-year limited warranty from Yinlowa\u003c\/li\u003e\n  \u003cli\u003eRecommendation: compare OE number, connector, bracket and port layout\u003c\/li\u003e\n  \u003cli\u003eNot a universal fit—confirm vehicle-specific compatibility before install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: this Yinlowa 25860-62010 replacement is aimed at DIY mechanics, independent repair shops and fleet technicians who have diagnosed a faulty Toyota or Lexus vacuum switching valve and need a cost-effective, OE-referenced swap. It’s appropriate for anyone who can confirm the original part number and connector configuration and who wants a like-for-like physical replacement backed by a one-year warranty. If you’re unsure which component triggered a check-engine light, perform or request a full diagnostic before replacing the valve to ensure the repair addresses the root cause.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this replace Toyota part 25860-62010?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — Yinlowa is designed to replace OE 25860-62010 (2586062010); confirm connector and port orientation first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this plug-and-play or requires modifications?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Plug-and-play on matching applications; no modifications if the connector, bracket and ports match the original.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67595345395897,"sku":"B0814MPNFB","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-vsv-front-view.jpg?v=1790587352"},{"product_id":"yinlowa-rear-hatch-button-switch-15106857-for-chevy-tahoe-suburban-gmc-yukon-2007-2014-oem-fit-rubber-pad","title":"Yinlowa Rear Hatch Button Switch 15106857 for Chevy Tahoe Suburban \u0026 GMC Yukon (2007–2014) — OEM-fit, Rubber Pad","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa 15106857 rear hatch button switch is a direct-fit replacement push-button that restores reliable liftgate opening on compatible 2007–2014 GM SUVs without swapping the entire exterior handle.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your Chevrolet Tahoe, Suburban, GMC Yukon or Cadillac Escalade liftgate button is cracked, sticky or fails to release the hatch, this OEM-style switch is designed to match the original part number and geometry so you can quickly return normal function. It replaces part numbers 15106857, 901-156, 901156 and D1499F and includes a molded housing, rubber press pad and plug-in blade connector to simplify installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this switch fit my vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe Yinlowa switch is engineered to fit specific GM full-size SUVs from the model years listed. It’s shaped and wired to match the factory mounting location and connector so the replacement installs into the existing handle assembly or liftgate trim with minimal modification. Always verify the part number and vehicle details before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 2007–2014 Chevrolet Tahoe\/Suburban 1500 models\u003c\/li\u003e\n  \u003cli\u003eFits 2007–2013 Chevrolet Suburban 2500 and Yukon XL 2500\u003c\/li\u003e\n  \u003cli\u003eWorks on 2007–2014 GMC Yukon\/Yukon XL 1500 and Cadillac Escalade\/ESV\u003c\/li\u003e\n  \u003cli\u003eCompare original part number or connector style to confirm fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does this replacement restore to the liftgate?\u003c\/h3\u003e\n\u003cp\u003eReplacing a worn or unresponsive button restores consistent hatch release performance without changing the whole exterior handle. The tactile rubber push surface and correct electrical blade connector help ensure the switch again actuates the latch when pressed. It eliminates intermittent opening caused by internal wear or contamination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores reliable mechanical actuation of the rear latch\u003c\/li\u003e\n  \u003cli\u003eTactile rubber pad for clear push feedback\u003c\/li\u003e\n  \u003cli\u003ePrevents the need for a full handle assembly replacement in most cases\u003c\/li\u003e\n  \u003cli\u003eHelps avoid repeated manual tailgate unlocking or forced opening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for anyone comfortable removing interior liftgate trim and disconnecting a small electrical connector. The switch is a plug-and-play component that mounts in the original location; however, steps vary by model and some trim fasteners may be hidden. If unsure, consult a factory service manual or a professional installer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAccess inside liftgate trim and remove the old switch\u003c\/li\u003e\n  \u003cli\u003eDisconnect factory-style plug and replace with the Yinlowa unit\u003c\/li\u003e\n  \u003cli\u003eMinimal hand tools: trim tools, socket or screwdriver depending on vehicle\u003c\/li\u003e\n  \u003cli\u003eInstallation time typically 15–45 minutes depending on experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this replacement switch for? This part is made for owners and mechanics working on Chevrolet Tahoe\/Suburban, GMC Yukon\/Yukon XL and Cadillac Escalade liftgates from the specified model years who want an affordable, correct-fit fix for a faulty rear hatch release button. It’s useful when the push surface is damaged, the button sticks, or the switch no longer reliably releases the latch. Yinlowa includes one switch per package and backs it with a one-year limited warranty; if you have fitment or installation questions, contact the seller through your order for assistance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this switch fit my 2012 Chevrolet Tahoe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the Yinlowa 15106857 fits 2007–2014 Chevy Tahoe models; verify your original part number or connector to be sure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include tools or multiple parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the package contains one rear hatch button switch only; tools are not included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67595562713273,"sku":"B0CY292B1Q","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-rear-hatch-button-front-view.jpg?v=1790589651"},{"product_id":"yinlowa-fuel-filter-kit-for-ford-6-4l-power-stroke-2008-2010-dual-primary-secondary-with-o-rings","title":"Yinlowa Fuel Filter Kit for Ford 6.4L Power Stroke (2008–2010) - Dual Primary \u0026 Secondary with O-rings","description":"\u003cp\u003e\u003cstrong\u003eThe Yinlowa FD4617 Fuel Filter Kit is a complete dual-filter replacement designed to service Ford 6.4L Power Stroke engines by supplying the primary fuel\/water separator and the secondary engine-mounted fuel filter with new seals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you own a 2008–2010 Ford Super Duty with the 6.4L V8 Power Stroke diesel, routine fuel-filter changes are essential to protect the high-pressure pump and injectors from debris and water. This kit bundles the frame-rail primary fuel\/water separator, the engine-mounted secondary filter, and two O-rings so you can perform a full fuel-system service in one visit. Each component is matched to common replacement numbers and backed by a one-year warranty for added confidence.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit my Ford Super Duty and how do I verify compatibility?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit is vehicle-specific and made for 2008–2010 F-250, F-350, F-450, and F-550 trucks with the 6.4L V8 Power Stroke diesel engine only. It is not compatible with 6.0L or 6.7L Power Stroke engines, so checking your engine displacement and model year is vital before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits 2008–2010 Ford F-250, F-350, F-450, F-550 with 6.4L V8 Power Stroke.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with 6.0L or 6.7L engines—confirm engine code or VIN.\u003c\/li\u003e\n  \u003cli\u003eCompare the original filter number to FD4617, FD-4617, or 8C3Z-9N184-C.\u003c\/li\u003e\n  \u003cli\u003eAlso replaces earlier FD4609 and 8C3Z-9N184-A numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and why are both filters necessary?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit supplies an upper (frame-rail) primary fuel\/water separator, a lower engine-mounted secondary filter, and two new sealing O-rings. Using both elements ensures contaminants and free water are removed before fuel reaches the high-pressure components in modern diesel injection systems.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePrimary frame-rail fuel\/water separator captures bulk water and large contaminants.\u003c\/li\u003e\n  \u003cli\u003eSecondary engine-mounted filter polishes fuel before the high-pressure pump.\u003c\/li\u003e\n  \u003cli\u003eTwo O-rings for correct sealing during reassembly—replace old seals every service.\u003c\/li\u003e\n  \u003cli\u003eComplete kit avoids piecemeal purchases and reduces service time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the kit and avoid common mistakes?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows the factory service procedure: drain or relieve fuel system pressure as required, replace the elements and O-rings, then prime and inspect for leaks. Avoid overtightening caps and always replace seals provided in the kit to maintain proper sealing and prevent leaks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRelieve fuel pressure according to factory instructions before removal.\u003c\/li\u003e\n  \u003cli\u003eReplace both filters and both O-rings—do not reuse old seals.\u003c\/li\u003e\n  \u003cli\u003eHand-tighten filter caps to specified torque; avoid overtightening.\u003c\/li\u003e\n  \u003cli\u003ePrime the system and check fittings for leaks after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat warranty and support come with the Yinlowa kit?\u003c\/h3\u003e\n\n\u003cp\u003eThe product includes a one-year warranty and pre-shipment inspection of the package contents. If you encounter fitment questions or need installation guidance, Yinlowa offers customer support to help confirm compatibility and troubleshoot the service process.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eOne-year warranty covering manufacturing defects under normal use.\u003c\/li\u003e\n  \u003cli\u003ePackage inspected before shipment to ensure complete contents.\u003c\/li\u003e\n  \u003cli\u003eCustomer support available for fitment and installation questions.\u003c\/li\u003e\n  \u003cli\u003eKeep original receipts and part numbers when contacting support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: This Yinlowa FD4617 kit is intended for owners and technicians servicing 2008–2010 Ford Super Duty trucks with the 6.4L Power Stroke who want a single-box solution for routine fuel-filter maintenance. It suits fleet mechanics, DIY truck owners, and service shops that prefer a vehicle-specific, dual-stage replacement set with new seals and manufacturer support. Confirm engine size and original part number before purchase to ensure correct fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit 6.7L Power Stroke engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This FD4617 kit fits only 2008–2010 Ford Super Duty trucks with the 6.4L Power Stroke.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are both O-rings included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains two O-rings—replace them during service to ensure proper sealing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Yinlowa","offers":[{"title":"Default Title","offer_id":67595585454265,"sku":"B07V2MGJ5H","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yinlowa-fd4617-front-view-kit-packed.jpg?v=1790590105"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/yinlowa-fd4617-front-view-kit-packed.jpg?v=1790612640","url":"https:\/\/redleafauto.ca\/collections\/yinlowa.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}