{"title":"YOXUFA","description":"\u003cp\u003eBrowse 42 YOXUFA products at RedLeaf Auto, including motorcycle, atv \u0026amp; snowmobile parts and exhaust \u0026amp; emissions parts. Every listing names the vehicles and fitments it suits — check the compatibility details on each product page before you order.\u003c\/p\u003e\u003cp\u003eFree tracked shipping across Canada on every order, with 30-day returns.\u003c\/p\u003e","products":[{"product_id":"yoxufa-predator-212-stage-1-performance-kit-212cc-carburetor-tuned-exhaust-for-196-224cc-engines","title":"YOXUFA Predator 212 Stage 1 Performance Kit — 212cc Carburetor \u0026 Tuned Exhaust for 196–224cc Engines","description":"\u003cp\u003e\u003cstrong\u003eThe YOXUFA Predator 212 Stage 1 Kit is a complete performance replacement set that upgrades carburetion, airflow and exhaust for 196–224cc small engines used in mini bikes and go-karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Stage 1 kit bundles a 212-style carburetor assembly, a tuned 212cc exhaust pipe, two 62mm air filters, an inlet manifold and a 50-inch throttle cable so you can swap worn parts or tune a Predator\/GX-series engine for more consistent throttle response and improved running behavior across varied terrain. The components are built for straightforward bolt-on installation on common platforms such as Predator 212\/224, GX160\/GX200 and many 196–200cc clones used by Coleman, Baja, Massimo, TrailMaster and Hammerhead models.\u003c\/p\u003e\n\n\u003ch3\u003eWhat parts are included and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains the main hardware needed to replace or upgrade fuel and intake systems: a 212-style carburetor, 212 exhaust pipe, two 62mm air filters, an inlet manifold and a 127 cm (50 in) throttle cable. These parts work together to stabilize air\/fuel delivery and improve combustion consistency compared with worn or undersized factory components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e212 carburetor assembly: calibrated for mid-range throttle response.\u003c\/li\u003e\n  \u003cli\u003e62mm foam\/pleated air filters: increase filtered airflow volume.\u003c\/li\u003e\n  \u003cli\u003e212 exhaust pipe: tuned length and TIG-welded flange for reliability.\u003c\/li\u003e\n  \u003cli\u003eInlet manifold + throttle cable: fitment parts for clean installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit affect fuel efficiency and idle stability?\u003c\/h3\u003e\n\u003cp\u003eBy supplying a larger, cleaner air stream and a properly sized carburetor jetting platform, the kit helps the engine achieve a steadier atomization pattern. That translates to fewer surges at idle and more predictable throttle response under load, which can reduce wasted fuel caused by inconsistent combustion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLarger 62mm filters allow increased clean airflow into the carburetor.\u003c\/li\u003e\n  \u003cli\u003eOptimized carburetor geometry promotes stable fuel atomization.\u003c\/li\u003e\n  \u003cli\u003eSmoothed intake and exhaust flow reduce erratic idling and hunting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this Stage 1 kit fit my engine or vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for a wide range of small-engine platforms. It's compatible with Predator 212\/224 and many 196–200cc clone engines used by popular mini bike and go-kart brands, but you should verify bolt patterns and throttle linkage before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: Coleman CT200U series, Baja Warrior, Massimo, TrailMaster, Hammerhead 80T.\u003c\/li\u003e\n  \u003cli\u003eCompatible engines: Predator 212\/224, GX200\/GX160, 196cc–200cc 5.5–6.5hp engines.\u003c\/li\u003e\n  \u003cli\u003eCheck: manifold bolt spacing, carb flange shape and throttle cable routing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the build quality and installation notes?\u003c\/h3\u003e\n\u003cp\u003eYOXUFA uses TIG welding on the exhaust flange and pipe to enhance durability during off-road use. The kit arrives as separate components for bolt-on installation, and basic hand tools are usually sufficient—tuning the carburetor may require small adjustments after install to match your engine and elevation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eExhaust pipe: inner and outer TIG-welds for stronger joints.\u003c\/li\u003e\n  \u003cli\u003eCarburetor: comes assembled but may need jetting fine-tune.\u003c\/li\u003e\n  \u003cli\u003eThrottle cable: 127 cm length suits many chassis but can be trimmed or rerouted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Stage 1 kit is aimed at owners of mini bikes, go-karts and small off-road vehicles who want a reliable, cost-effective upgrade or replacement for worn intake and exhaust parts. It's suitable for DIY mechanics, hobbyists tuning a Predator- or GX-series engine, and anyone restoring older mini-vehicles that require improved idle behavior and a more stable running character without heavy modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this Stage 1 kit compatible with Predator 212 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It's designed for Predator 212\/224 and many 196–200cc GX-series clones, but confirm bolt pattern and throttle linkage before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need special tools to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools are required for basic installation, though small adjustments and carb tuning tools may be helpful.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67586703851705,"sku":"B0CR732R6D","price":119.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-predator212-front-assembly.jpg?v=1790490669"},{"product_id":"yoxufa-stage-1-212cc-carburetor-kit-for-predator-gx160-engines-62mm-high-flow-filter-tig-welded-exhaust","title":"YOXUFA Stage 1 212cc Carburetor Kit for Predator\/GX160 Engines — 62mm High-Flow Filter \u0026 TIG-Welded Exhaust","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's Stage 1 212cc carburetor kit upgrades small engines with a larger 62mm air filter, tuned carburetor, and TIG-welded exhaust pipe to improve throttle response and efficiency on mini bikes and go-karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Stage 1 kit is a plug-compatible performance upgrade assembled for Predator 212\/224cc, GX160\/GX200, and similar 5.5–6.5 hp horizontal shaft engines used in mini bikes, go-karts, and utility mini-ATVs. It combines a re-jetted carburetor, larger-bore air filtration, an inlet manifold, a long throttle cable and a reinforced exhaust pipe so you can swap parts quickly and keep your machine running cleaner and more responsively.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit affect fuel use and throttle feel?\u003c\/h3\u003e\n\u003cp\u003eThe kit aims to stabilize atomization and airflow at typical recreational RPM ranges by increasing intake volume and optimizing carburetor calibration. That can make throttle transitions smoother, reduce stumbling at part-throttle, and help maintain a steady idle when fitted and tuned correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e62mm high-flow air filter increases clean air volume into the carburetor.\u003c\/li\u003e\n  \u003cli\u003eCarburetor re-jetting for common Stage 1 performance targets.\u003c\/li\u003e\n  \u003cli\u003eLong 127cm (50in) throttle cable for easier routing and control response.\u003c\/li\u003e\n  \u003cli\u003eHelps stabilize idle and mid-range throttle behavior under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat engines and vehicles is the YOXUFA Stage 1 kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed around the Predator-style horizontal shaft engines and key GX160\/GX200 family dimensions. It fits many popular models used on minibikes and karts but always check manifold bolt pattern, intake size and exhaust flange before purchase to ensure correct fitment.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with Predator 212cc \/ 224cc \/ 196cc style engines and GX160\/GX200 variants.\u003c\/li\u003e\n  \u003cli\u003eCommon vehicle fits: Coleman CT200U, CT200U-EX, BT200X, Baja Warrior MB200, TrailMaster MB200 and similar.\u003c\/li\u003e\n  \u003cli\u003eIncludes inlet manifold and mounting hardware to match many stock layouts.\u003c\/li\u003e\n  \u003cli\u003eConfirm bolt spacing and throttle linkage orientation for exact compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the exhaust pipe add, and how is it constructed?\u003c\/h3\u003e\n\u003cp\u003eThe supplied exhaust pipe is TIG-welded on both inner and outer seams to improve strength and reduce leak points compared with basic stamped assemblies. That durability matters under vibration and repeated heat cycles typical of off-road use, and the pipe shape is tuned to work with the Stage 1 carburetor setup.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTIG-welded flange and seams for stronger, longer-lasting joints.\u003c\/li\u003e\n  \u003cli\u003ePiped for Stage 1 backpressure characteristics to match carburetor tuning.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish for longer field life.\u003c\/li\u003e\n  \u003cli\u003eDesigned to be a direct-replacement in many Predator-style installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what basic installation steps should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the main components needed to swap into most mini bike and go-kart engines with minimal fabrication. Basic mechanical skills, common hand tools, and a few hours are usually enough to install and then fine-tune the carburetor jetting and idle settings for your machine.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eKit contents: 1 × 212cc carburetor, 1 × 212cc exhaust pipe, 2 × 62mm air filters, 1 × inlet manifold, 1 × 127cm (50in) throttle cable.\u003c\/li\u003e\n  \u003cli\u003eInstallation: remove stock carburetor and exhaust, fit manifold, install carburetor and filter, route throttle cable, tighten all fasteners.\u003c\/li\u003e\n  \u003cli\u003eTuning: set idle, check for air leaks, adjust mixture and throttle response after a short break-in run.\u003c\/li\u003e\n  \u003cli\u003eTools needed: basic wrenches, screwdrivers, gaskets or sealant as required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YOXUFA 212cc Stage 1 kit is aimed at owners of small recreational vehicles—mini bikes, pit bikes and go-karts—who want an accessible, bolt-on performance and durability upgrade without moving to extreme modifications. It suits hobbyists and DIY mechanics comfortable with carburetor swaps and basic tuning, and owners replacing worn stock parts who prefer a higher-flow intake and a stronger exhaust assembly. Ensure model compatibility before purchasing and plan a brief tuning session after installation for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my Predator 212 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it's designed for Predator-style 212\/224cc engines; confirm intake bolt pattern and exhaust flange dimensions first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to install the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No special tools required—basic wrenches, screwdrivers, and gaskets suffice; allow time for tuning after install.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67586703884473,"sku":"B0CR74VCYV","price":119.28,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-carburetor-front-view.jpg?v=1790490669"},{"product_id":"yoxufa-vm22-stage-2-performance-kit-212cc-carburetor-38mm-air-filters-exhaust-muffler-for-predator-196-224cc-mini-bikes","title":"YOXUFA VM22 Stage‑2 Performance Kit — 212cc Carburetor, 38mm Air Filters \u0026 Exhaust Muffler for Predator 196–224cc Mini Bikes","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA VM22 is a complete stage‑2 performance replacement kit that includes a 212cc carburetor, exhaust pipe, muffler, throttle assembly, and air filters designed to upgrade Predator 212\/224 and similar 196–200cc mini‑bike and go‑kart engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all‑in‑one kit supplies the core components you need to refresh or boost a small engine drivetrain: a 212 carburetor, 38mm air filters, inlet manifold, exhaust pipe and muffler, throttle cable and grips, plus related fittings. It’s built to be a drop‑in replacement for many Predator, Coleman, Baja, Massimo and compatible mini bike and go‑kart models, simplifying installation while improving engine breathing and durability.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit my Predator 212 or similar 196–224cc engine?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility is broad but not universal; the kit targets Predator 212\/224 engines and many clones used in Coleman, Baja, TrailMaster, Massimo and other mini bike\/go‑kart models. Check your engine flange, intake manifold type and exhaust mounting points against the kit parts before purchasing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes 212 carburetor and inlet pipe manifold for Predator‑style engines.\u003c\/li\u003e\n  \u003cli\u003eFits many CT200U, BT200X, MB165\/MB200, and similar models listed in product details.\u003c\/li\u003e\n  \u003cli\u003eVerify flange bolt pattern and exhaust hanger alignment on your vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the VM22 kit affect fuel efficiency and power delivery?\u003c\/h3\u003e\n\n\u003cp\u003eThis kit is designed to improve engine airflow and combustion stability. The 38mm air filters allow more clean air into the carburetor, helping the carburetor atomize fuel better, which can lead to steadier throttle response and a potential reduction in wasted fuel under similar riding conditions.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e38mm high‑flow filters increase clean air volume to the carburetor.\u003c\/li\u003e\n  \u003cli\u003eCarburetor tuning capability improves atomization and throttle response.\u003c\/li\u003e\n  \u003cli\u003eExhaust and muffler pairing reduces backpressure for smoother powerband.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction features improve durability?\u003c\/h3\u003e\n\n\u003cp\u003eYOXUFA emphasizes stronger welds and thicker pipe sections where vibrations and heat are greatest. The flange and pipe see reinforcement by double‑side welding, and the muffler is made to withstand the thermal and mechanical stress common in off‑road small engines.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFlange and pipe welded inside and out for added strength.\u003c\/li\u003e\n  \u003cli\u003eExhaust designed for high‑intensity riding and vibration resistance.\u003c\/li\u003e\n  \u003cli\u003eDurable throttle housing, cable and grips packaged for repeatable fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what tools will I need for installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit ships with every major component required to replace carburetor, intake and exhaust systems on compatible units. Basic hand tools and a few tuning adjustments are typically all that’s needed for installation and to fine‑tune idle\/mixture settings.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1x 212 carburetor, exhaust pipe, muffler, on\/off switch, throttle grips, throttle housing clamp, two 38mm air filters, inlet manifold, 127 cm throttle cable.\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: socket set, screwdrivers, pliers, and feeler gauge for throttle adjustments.\u003c\/li\u003e\n  \u003cli\u003ePlan a carburetor tune after install for best idle and throttle behavior.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The YOXUFA VM22 kit is aimed at DIY mechanics, restorers and riders who own Predator 212\/224cc or compatible mini‑bike and go‑kart engines and want an affordable, integrated replacement that upgrades airflow and exhaust components. It’s a practical choice for riders who need a straightforward swap with improved durability and easier access to tuning components, not for owners requiring vehicle‑specific factory‑OEM exhaust geometry or emissions‑certified parts.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the YOXUFA VM22 kit compatible with Predator 212 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the kit is built for Predator 212\/224 engines and many compatible mini‑bike\/go‑kart models; verify flange and exhaust mounts before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include the throttle cable and air filters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes a 127 cm throttle cable, two 38mm air filters, carburetor, exhaust, muffler, and other fittings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67586846064825,"sku":"B0CS2XHT37","price":154.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-vm22-front-assembly.jpg?v=1790493953"},{"product_id":"yoxufa-vm22-carburetor-stage-2-kit-for-predator-212-224-26mm-exhaust-38mm-air-filter-throttle-cable","title":"YOXUFA VM22 Carburetor Stage 2 Kit for Predator 212\/224 26mm Exhaust, 38mm Air Filter, Throttle Cable","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA VM22 Stage 2 kit upgrades a Predator 212\/224 engine with a VM22 carburetor, 26mm exhaust pipe and muffler, larger air filter and throttle components to boost throttle response and durability for mini bikes and go-karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete performance kit bundles a VM22 carburetor, 26mm exhaust pipe, muffler, 38mm air filter, throttle cable and grips, inlet manifold and switch so you can replace or upgrade stock parts in Predator 212cc\/224cc and similar 6.5HP engines. Components are welded and machined for higher vibration resistance, and the larger intake surface helps stabilize carburetor atomization for more reliable power delivery under load.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the VM22 carburetor improve engine response?\u003c\/h3\u003e\n\u003cp\u003eThe VM22 is designed with a larger bore and calibrated jets that allow a richer, more consistent air-fuel mix at mid and high throttle. That makes the throttle feel sharper and reduces hesitation during rapid throttle changes. Proper tuning after installation is recommended to match altitude and fuel quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e26mm intake throat for increased flow\u003c\/li\u003e\n  \u003cli\u003ePre-jetted for Predator-style engines (tune as needed)\u003c\/li\u003e\n  \u003cli\u003eSimplified linkages for responsive throttle actuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the exhaust and muffler make a difference on performance?\u003c\/h3\u003e\n\u003cp\u003eThe included 26mm exhaust pipe and muffler are built to improve scavenging and reduce backpressure compared with many stock pipes. Strong welds and reinforced flanges help maintain a secure seal during high-vibration use, so power delivery remains consistent over rough terrain. Expect slightly improved mid-range torque and a fuller sound.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e26mm pipe diameter tuned for Predator 212\/224 displacement\u003c\/li\u003e\n  \u003cli\u003eDurable welded flange and pipe joints for longevity\u003c\/li\u003e\n  \u003cli\u003eMuffler reduces noise while preserving flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and tuning steps should I plan for?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic mechanical tools and moderate engine experience; you will swap the carburetor, manifold, exhaust, and attach the throttle cable and grips included in the kit. After installation, perform an initial jetting check and adjust idle and air\/fuel mixture to suit your machine and environment. Always secure all clamps and bolts, and check for leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace manifold and gasket when fitting new carburetor\u003c\/li\u003e\n  \u003cli\u003eInstall throttle cable and adjust free play, then re-check\u003c\/li\u003e\n  \u003cli\u003eFine-tune mixture and idle with engine warm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit fit different mini bikes and go-karts?\u003c\/h3\u003e\n\u003cp\u003eThe package targets Predator 212cc and compatible 196–224cc small engines and many off-brand mini bikes and go-karts that use a similar bolt pattern and intake spacing. The kit includes a 127 cm (50 in) throttle cable and universal throttle housing clamp to accommodate different frame layouts. Verify bolt spacing and manifold match before purchase for a smooth fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with many Coleman, Baja, TrailMaster and Massimo models\u003c\/li\u003e\n  \u003cli\u003eIncludes universal throttle housing, grips and switch for flexibility\u003c\/li\u003e\n  \u003cli\u003eCheck engine model and manifold pattern prior to installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and DIY mechanics who want an affordable stage-2 upgrade for Predator-style 6.5HP engines—people who repair or modify mini bikes, go-karts or small off-road vehicles and are comfortable with carb tuning and basic exhaust work. This kit is best for users seeking improved throttle response, stronger mid-range performance, and a rugged replacement set of intake and exhaust components that hold up to vibration and rough use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit compatible with Predator 212 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is designed for Predator 212\/224 engines and many similar 196–224cc small engines, but verify manifold bolt pattern before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need to retune after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. After installation you should adjust idle and mixture and fine-tune jetting for optimal performance and to match local altitude.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67586846130361,"sku":"B0CS373FPN","price":156.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-vm22-front-assembly_e278bd2c-dbdc-4c3c-9842-ed089fd20bea.jpg?v=1790493953"},{"product_id":"yoxufa-exhaust-header-and-muffler-assembly-for-predator-212-196-224cc-engines-heat-shield-direct-fit-replacement","title":"YOXUFA Exhaust Header and Muffler Assembly for Predator 212\/196\/224cc Engines — Heat Shield, Direct-Fit Replacement","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA replacement exhaust header and muffler for Predator 212\/196\/224cc and compatible mini-bike engines reduces vibration, improves exhaust routing, and adds a heat shield for rider protection.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis replacement exhaust assembly is designed for mini bikes, go-karts, and small-engine equipment that use Predator 212-style or Clone OHV engines. Built with a fully welded header interface, the kit includes the muffler, gaskets, mounting hardware, a heat-shield tape, and clamps so you can swap the entire system in one installation. It’s intended as a direct-fit option for many common models and aftermarket clones, offering quieter operation and durable construction for recreational and utility use.\u003c\/p\u003e\n\n\u003ch3\u003eWill this exhaust fit my Predator 212 or similar engine?\u003c\/h3\u003e\n\u003cp\u003eYes—this assembly is made to match the common flange and dimensions used on Predator Hemi and non-hemi 212cc engines and many Clone OHV small engines. It also lists compatibility with several 196cc, 224cc, and 6.5HP GX-style engines used in mini bikes and go-karts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Predator 212\/196\/224cc, GX160\/GX200 6.5HP engines and common clone series.\u003c\/li\u003e\n  \u003cli\u003eFits Coleman CT200U variants, Baja Warrior\/MB200 series, Hammerhead and many Trailmaster\/Yerf-Dog models.\u003c\/li\u003e\n  \u003cli\u003eIncludes gaskets and mounting hardware for a straightforward bolt-on replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the muffler affect noise and ride feel?\u003c\/h3\u003e\n\u003cp\u003eThe muffler is shaped to lower perceived exhaust noise and tame harsh frequencies while preserving exhaust flow for smooth throttle response. Riders typically notice reduced drone at cruising speeds and a more controlled exhaust tone during acceleration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated muffler chamber reduces high-frequency noise for more pleasant riding.\u003c\/li\u003e\n  \u003cli\u003eHeader routing improves exhaust scavenging for steadier power delivery.\u003c\/li\u003e\n  \u003cli\u003eFully welded junctions limit leaks that can cause popping or rough idle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eThe kit is comprehensive so you won’t need to source extra parts for a standard replacement. Basic hand tools are sufficient for most installations; the included wrench and fasteners make assembly quicker.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage contents: exhaust header, muffler, heat-shield tape, 2 gaskets, 2 screws, wrench, 4 ties, metal bracket, 3 cable clamps.\u003c\/li\u003e\n  \u003cli\u003eTypical tools: socket set, screwdriver, torque wrench (recommended), and penetrating oil for old bolts.\u003c\/li\u003e\n  \u003cli\u003eExpect 30–90 minutes for a routine swap, depending on corrosion and access.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the heat shield tape and welding quality improve safety and durability?\u003c\/h3\u003e\n\u003cp\u003eThe supplied heat shield tape helps保护 legs and nearby components from radiant heat, while the fully welded header interface reduces stress points prone to cracking. Together they extend component life and improve rider comfort.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat-shield tape protects plastics, wiring, and skin from high exhaust temperatures.\u003c\/li\u003e\n  \u003cli\u003eFully welded pipe joints minimize exhaust leaks and the risk of hairline cracks.\u003c\/li\u003e\n  \u003cli\u003eIncluded clamps and bracket secure the system to reduce vibration and rattling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YOXUFA exhaust assembly is aimed at mini-bike and go-kart owners, backyard mechanics, and small-engine repair shops who need a reliable, direct-fit replacement for Predator-style or Clone OHV 212\/196\/224cc engines. It’s also suitable for riders who want a quieter, more robust exhaust with thermal protection for improved comfort and durability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit my Predator 212 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s designed for Predator 212\/196\/224cc and many Clone OHV 6.5HP engines; check flange and dimensions for final fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are gaskets and hardware included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes gaskets, screws, a wrench, bracket, clamps, ties, and heat-shield tape for a full replacement.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67587065348281,"sku":"B0B4WHYCFQ","price":90.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-packaging-exhaust-assembly.jpg?v=1790498749"},{"product_id":"yoxufa-mini-bike-exhaust-muffler-kit-for-predator-212-224-196cc-welded-pipe-heat-shield-included","title":"YOXUFA Mini Bike Exhaust Muffler Kit for Predator 212\/224\/196cc — Welded Pipe, Heat Shield Included","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's Mini Bike Exhaust Muffler kit replaces worn Predator-style 212\/224\/196cc exhausts, delivering a durable welded pipe, muffler, gasket and heat-shield tape for small engines and go-kart applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re restoring a mini bike, fixing a go-kart, or servicing a small OHV clone engine, this complete exhaust kit is built to match common Predator 212-family bolt patterns and offers improved construction for vibration resistance. The set arrives with the welded exhaust pipe, muffler, gasket, mounting screws, a wrench, ties and heat shield tape so you can install it without hunting for extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eWill this exhaust fit my engine or mini vehicle?\u003c\/h3\u003e\n\u003cp\u003eThis YOXUFA kit is designed for many popular small engines and mini-vehicle models that use Predator-style 212\/224\/196cc configurations and similar OHV clones. Fitment covers Predator 212, 224cc, 196cc and compatible GX160\/GX200 and several branded mini-bike\/go-kart models when using the same flange and mounting pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible engines: Predator 212\/224\/196, GX160\/GX200, and common OHV clones.\u003c\/li\u003e\n  \u003cli\u003eCompatible vehicles: Coleman CT200U\/CT200U-EX, Baja Warrior MB165\/MB200, Massimo MB200, TrailMaster MB series, Motovox MBX20 and many go-karts.\u003c\/li\u003e\n  \u003cli\u003eAlways verify your engine flange and bolt spacing against the product before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the construction different from cheaper replacements?\u003c\/h3\u003e\n\u003cp\u003eYOXUFA emphasizes stronger, more durable welding and pipe assembly to withstand heavy vibration and higher-intensity riding. Both the inner and outer welds are completed with advanced techniques to reduce cracking and failure where the flange meets the pipe.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-side welded flange and pipe for added structural strength.\u003c\/li\u003e\n  \u003cli\u003eMuffler and pipe designed to resist vibration-related fatigue during off-road use.\u003c\/li\u003e\n  \u003cli\u003eIncludes gasket, mounting hardware and ties to create a secure installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what else do I need?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the main pipe, muffler, heat shield tape, gasket, two screws, one wrench and four ties so you can complete most swaps right away. For specific installations you may want extra gaskets or anti-seize, but the package is intended to be a near-complete replacement solution.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 exhaust pipe, 1 muffler, 1 heat shield tape, 1 gasket, 2 screws, 1 wrench, 4 ties.\u003c\/li\u003e\n  \u003cli\u003eRecommended extras: anti-seize on bolts, replacement springs or clamps if your application uses them.\u003c\/li\u003e\n  \u003cli\u003eNote: Confirm physical dimensions and bolt pattern match your engine prior to ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this exhaust for longer life?\u003c\/h3\u003e\n\u003cp\u003eInstall the pipe using the supplied gasket and screws, torquing to your engine maker’s specs and applying anti-seize where appropriate. Wrap the provided heat shield tape around any adjacent hoses or plastic to protect from radiant heat, and periodically inspect welds, bolts, and hangers after high-vibration use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse the supplied wrench and screws; add anti-seize to threads to ease future removal.\u003c\/li\u003e\n  \u003cli\u003eWrap heat shield tape on vulnerable nearby parts to prevent heat damage.\u003c\/li\u003e\n  \u003cli\u003eCheck mounting bolts and welds after first few rides and during routine service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This exhaust kit is aimed at DIY mechanics, mini-bike and go-kart owners, small-engine repair shops and restorers who need a robust, drop-in Predator-style replacement. If you run a 212\/224\/196cc engine or an OHV clone with the same flange pattern and want a sturdier, ready-to-install muffler assembly with heat protection and basic hardware included, this YOXUFA kit is built for that use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this fit Predator 212 and similar engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it’s made for Predator 212\/224\/196cc and many GX160\/GX200-style OHV clone engines with the same flange pattern.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What parts are included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes pipe, muffler, gasket, heat shield tape, two screws, a wrench and four ties for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67587163914425,"sku":"B09QKDSFNM","price":87.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-view-exhaust-muffler.jpg?v=1790501043"},{"product_id":"yoxufa-dirt-bike-gas-tank-3-5l-with-cnc-aluminum-cap-abs-body-fits-50-125cc-pit-bikes","title":"YOXUFA Dirt Bike Gas Tank 3.5L with CNC Aluminum Cap — ABS Body, Fits 50–125cc Pit Bikes","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's aluminum-capped 3.5L dirt bike gas tank replaces worn tanks on SSR, CRF50, XR50 and many Chinese-brand pit bikes for a durable, sealed fuel system upgrade.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether restoring a small-displacement pit bike or upgrading a trail rider, this replacement fuel tank from YOXUFA is designed to match popular 50cc–125cc models. It pairs a high-strength ABS body with a CNC aluminum fuel cap and includes the fuel filter, petcock\/pump and breath tube for a ready-to-install assembly. Capacity, fitment notes and included parts are tailored for common CRF50\/XR50 and several Chinese-brand dirt bikes.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tank fit my SSR, CRF50, XR50 or TaoTao pit bike?\u003c\/h3\u003e\n\u003cp\u003eFitment covers many 50cc–125cc pit and mini dirt bikes, but not every model in those ranges. Confirm your frame mounting points and tank dimensions before ordering; this tank is specified for CRF50, XR50 and similar Chinese-brand models like SSR, TaoTao, Coolster and Pitster Pro.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible examples: CRF50, XR50, SSR50\/70\/110, TaoTao 110, Coolster 70\/125.\u003c\/li\u003e\n  \u003cli\u003eNot universal—check measurements and mounting location.\u003c\/li\u003e\n  \u003cli\u003eCapacity is 3.5 L (0.92 gal); verify range requirements for your rides.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and parts come with the replacement tank?\u003c\/h3\u003e\n\u003cp\u003eThe tank combines a tough ABS plastic body with a CNC-machined aluminum gas cap for improved durability over stock plastic caps. YOXUFA ships essential fuel hardware so you won’t need to source extra components for most installations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength ABS plastic tank body for impact resistance and a reliable seal.\u003c\/li\u003e\n  \u003cli\u003eCNC aluminum fuel cap with attached fuel breath tube for longevity.\u003c\/li\u003e\n  \u003cli\u003eIncluded fuel filter and fuel pump\/petcock to complete the fuel system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check before fitting?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for mechanically confident riders, but you should compare mounting holes, hose routing and fuel line sizes ahead of time. Basic hand tools are usually sufficient, and all supplied hardware reduces the need for extra parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect mounting points and clearance around the frame and seat.\u003c\/li\u003e\n  \u003cli\u003eConfirm fuel line diameter and petcock orientation match your bike.\u003c\/li\u003e\n  \u003cli\u003eBleed and test for leaks after installation before riding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much fuel range can I expect from a 3.5L tank?\u003c\/h3\u003e\n\u003cp\u003eA 3.5-liter tank offers modest range suitable for short trail sessions, practice laps and pit-area use. Exact range depends on engine displacement, riding style and terrain; this capacity is common for mini and pit bikes where weight and compactness matter more than long-distance touring.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCapacity: 3.5 L (0.92 gallons).\u003c\/li\u003e\n  \u003cli\u003eBest for short rides, practice, and pit work—not long touring.\u003c\/li\u003e\n  \u003cli\u003eConsider carrying spare fuel for extended outings or remote trails.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YOXUFA dirt bike gas tank is aimed at riders restoring or maintaining small-displacement pit and mini dirt bikes—particularly CRF50\/XR50 owners and those with common Chinese-brand models like SSR, TaoTao, Coolster, Pitster Pro and Kayo. It’s also a practical upgrade for anyone wanting a sturdier aluminum cap and a complete replacement kit that includes the filter and petcock. If you need a compact 3.5L tank with reliable materials and the parts required for a typical swap, this YOXUFA assembly is built to fit those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the fuel capacity of this YOXUFA tank?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The tank holds 3.5 liters (0.92 gallons). Check your expected range before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include the fuel cap and petcock?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes a CNC aluminum cap, fuel breath tube, fuel filter and petcock\/pump.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67587269296313,"sku":"B09Y36KCW1","price":108.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-profile-gas-tank.jpg?v=1790503416"},{"product_id":"yoxufa-mini-bike-hydraulic-brake-kit-180mm-rear-disc-rotor-for-baja-doodle-bug-db30-79-100cc","title":"YOXUFA Mini Bike Hydraulic Brake Kit 180mm Rear Disc Rotor for Baja Doodle Bug DB30 (79–100cc)","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's Mini Bike Hydraulic Brake Kit is a complete 180mm rear disc brake replacement engineered to fit the Baja Doodle Bug DB30, upgrading stopping power and durability over the stock caliper.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one kit is tailored for the Baja Doodle Bug DB30 lineup (79cc, 97cc, 100cc) and includes a hydraulic brake assembly, a steel 180mm rotor, and a chain tensioner. It’s built to deliver stronger clamping force than the original mechanical caliper, offering a more responsive and controlled rear brake feel for off-road and recreational mini-bike use. Note the kit is designed to bolt directly onto DB30 frames; other mini-bike models may require bracket modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit change braking performance on a Baja Doodle Bug DB30?\u003c\/h3\u003e\n\u003cp\u003eSwitching from the stock mechanical caliper to this hydraulic system increases clamping consistency and modulation under load, which helps shorten stopping distances and feel more predictable as speed or terrain change.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHydraulic caliper provides stronger, more even pressure than typical drum or simple cable brakes.\u003c\/li\u003e\n  \u003cli\u003e180mm steel rotor resists warping and tolerates heat better for repeated stops.\u003c\/li\u003e\n  \u003cli\u003eImproved pedal\/lever feedback gives riders finer control during deceleration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and what tools or modifications might I need?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with the hydraulic brake assembly, one 180mm steel disc rotor, and a chain tensioner. Vehicles other than the DB30 may need custom bracket work to fit the caliper in place.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: hydraulic caliper with hose and fittings, 180mm rotor, mini bike chain tensioner.\u003c\/li\u003e\n  \u003cli\u003eDirect fit: Baja Doodle Bug DB30 models (79cc, 97cc, 100cc) require no extra adapters.\u003c\/li\u003e\n  \u003cli\u003eOther bikes: bracket cutting, relocating, or fabricating a mounting plate may be necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the rotor and what maintenance should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe rotor is formed from hardened steel to minimize bending and corrosion for longer service life. Routine maintenance still applies: check pad thickness, rotor runout, and bleed hydraulic lines periodically to maintain optimum braking performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel 180mm rotor resists deformation under heat and repeated braking.\u003c\/li\u003e\n  \u003cli\u003eInspect pads and rotor for wear every few rides, depending on conditions.\u003c\/li\u003e\n  \u003cli\u003eBleed hydraulics as needed for consistent lever feel and to remove air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit other mini-bikes like Coleman or Motovox without changes?\u003c\/h3\u003e\n\u003cp\u003eThe kit is manufactured specifically for Baja Doodle Bug DB30 frames; it may physically fit some other models only after alteration. Owners of Coleman CT100U, Motovox, MMB80 or MMB105 should plan to modify the brake bracket or create a new mount to secure the caliper correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect compatibility: Baja Doodle Bug DB30 only.\u003c\/li\u003e\n  \u003cli\u003eNon-direct fit: expect to cut\/relocate the original bracket and fabricate a new mounting solution.\u003c\/li\u003e\n  \u003cli\u003eMeasure mounting points and clearances before attempting installation on other models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders and DIY mechanics who own a Baja Doodle Bug DB30 (79cc, 97cc, 100cc) and want a stronger, more reliable rear braking system than the original setup. It’s ideal for off-road recreational use where improved brake modulation and a durable steel rotor matter. If you have a different mini-bike model, this kit can still be used but requires mechanical skill to modify or fabricate a mounting bracket.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this brake kit bolt directly to a Baja Doodle Bug DB30?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The YOXUFA kit is designed for direct fit on Baja Doodle Bug DB30 (79cc, 97cc, 100cc) without extra adapters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this kit on other mini bikes like Coleman or Motovox?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can, but expect to cut or relocate the original bracket and fabricate a new mount for proper installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67587287351481,"sku":"B0CR6G2TZ1","price":106.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-assembly-installed-db30.jpg?v=1790504393"},{"product_id":"yoxufa-60t-steel-sprocket-hub-for-predator-212-196cc-go-karts-1-bore-1-4-keyway-40-41-420-chain-compatible","title":"YOXUFA 60T Steel Sprocket Hub for Predator 212\/196cc Go Karts — 1\" Bore, 1\/4\" Keyway, #40\/#41\/#420 Chain Compatible","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's sprocket hub is a heavy-duty 60-tooth rear drive assembly with a 1\" bore and 1\/4\" keyway designed to fit most Predator 212cc\/196cc 6.5hp go karts, mini bikes, drift trikes and dune buggies using #40\/#41\/#420 chains.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you're replacing worn drivetrain parts or upgrading to a more durable rear assembly, this complete sprocket hub kit provides the hub, 60T sprocket, hardware and key needed to mount directly to a 1\" live axle. Built from steel and sized for common small-engine recreational vehicles, the kit is intended to simplify installation and restore reliable power transfer from the engine to the rear wheel.\u003c\/p\u003e\n\n\u003ch3\u003eWill this sprocket hub fit my Predator 212cc or 196cc go kart?\u003c\/h3\u003e\n\u003cp\u003eThis hub is made for 1\" live axles with a 1\/4\" keyway and is sized to accept #40, #41 and #420 chain types. Confirm your axle diameter, keyway size and the sprocket mounting pattern before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHub bore: 1\" (25.4 mm) with 1\/4\" key\/keyway.\u003c\/li\u003e\n  \u003cli\u003eSprocket: 60 teeth, compatible with #40\/#41\/#420 chains.\u003c\/li\u003e\n  \u003cli\u003eMounting bolt circle: 90 mm (3.54\") with eight 10 mm bolt holes.\u003c\/li\u003e\n  \u003cli\u003eCenter hole diameter: 54 mm (2.13\").\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and solid is the YOXUFA sprocket hub kit?\u003c\/h3\u003e\n\u003cp\u003eThe primary components are steel for strength and wear resistance under typical small‑vehicle loads. The kit ships with the necessary fasteners and a 1\/4\" key so you can install a complete rear drive assembly without sourcing extra parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: solid steel construction for hub and sprocket.\u003c\/li\u003e\n  \u003cli\u003eThickness: sprocket plate about 6 mm (0.236\").\u003c\/li\u003e\n  \u003cli\u003ePacking includes: hub, 420-60T sprocket, 1\/4\" keyway, 4 screws and 4 nuts.\u003c\/li\u003e\n  \u003cli\u003eDesigned for recreational use on mini bikes, go karts and similar vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and mounting details I need to check?\u003c\/h3\u003e\n\u003cp\u003eMeasure the mounting center hole and bolt pattern carefully—if those don't match your existing setup the hub will not bolt on. The listing’s dimensions match common aftermarket sprockets, but confirm before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOverall sprocket diameter: 248 mm (9.76\").\u003c\/li\u003e\n  \u003cli\u003eSprocket center hole: 54 mm (2.13\").\u003c\/li\u003e\n  \u003cli\u003eBolt circle: 90 mm (3.54\"), bolt hole diameter: 10 mm (0.39\") ×8.\u003c\/li\u003e\n  \u003cli\u003eHub overall length: 3\/4\"; hub outer diameter: 4\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is direct when fitment matches: slide the hub onto a 1\" live axle, align the 1\/4\" key in the keyway, then secure the sprocket with the included bolts and nuts. Basic mechanic tools and torque attention are all that’s required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTools: socket set, torque wrench, hex\/Allen or appropriate driver for supplied screws.\u003c\/li\u003e\n  \u003cli\u003eProcedure: seat hub on axle, insert key, align sprocket, tighten nuts to recommended torque.\u003c\/li\u003e\n  \u003cli\u003eTip: verify chain alignment and tension after installation to avoid premature wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders and hobbyists who own Predator 212cc\/196cc engines or similar 6.5hp setups and need a reliable, all-in-one rear drive replacement will benefit most. This kit is aimed at DIY mechanics, kart builders, and small-vehicle restorers who require a heavy-duty steel hub and a 60T sprocket sized for #40\/#41\/#420 chains. If you are unsure about measurements or axle type, measure your current components or contact seller support before purchase to confirm fitment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this sprocket hub fit a Predator 212cc engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes if your rear uses a 1\" live axle with a 1\/4\" keyway and the sprocket mounting pattern matches the listed 90mm bolt circle and 54mm center hole.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which chain sizes are compatible with this 60T sprocket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The sprocket is compatible with #40, #41 and #420 chains commonly used on mini bikes and small go karts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67587483828409,"sku":"B0BNBL9PN1","price":104.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-assembly-sprocket-hub.jpg?v=1790509818"},{"product_id":"yoxufa-48-tooth-420-chain-sprocket-hub-for-predator-212cc-196cc-1-bore-1-4-keyway-steel-48t","title":"YOXUFA 48-Tooth 420 Chain Sprocket Hub for Predator 212cc\/196cc — 1\" Bore, 1\/4\" Keyway, Steel 48T","description":"\u003cstrong\u003eYOXUFA's 48-tooth 420 sprocket hub is a heavy-duty steel replacement designed to fit 1\" bore shafts with a 1\/4\" keyway for Predator 212cc and 196cc mini bikes and go-karts.\u003c\/strong\u003e\n\n\u003cp\u003eThis sprocket hub pairs a 48-tooth #420 chain sprocket with a 4\" diameter hub and a precision 1\" bore to give a direct-fit drivetrain component for many small-engine powersports. Built from steel with a matched bolt pattern and supplied hardware, it replaces worn or incorrect stock sprockets and restores proper chain engagement and power transfer on hobby vehicles such as mini bikes, go-karts, drift trikes and dune buggies.\u003c\/p\u003e\n\n\u003ch3\u003eWill this sprocket fit my Predator 212cc or 196cc mini bike?\u003c\/h3\u003e\n\u003cp\u003eIt is made to match common Predator small-engine setups, but fit depends on your hub mounting dimensions and axle key size. Compare your current sprocket measurements to the part specs before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBore diameter: 1\" (25.4 mm) to slide onto the axle\u003c\/li\u003e\n  \u003cli\u003eKey\/keyway: 1\/4\" to mate with standard Predator axles\u003c\/li\u003e\n  \u003cli\u003eBolt circle (mounting): 90 mm (3.54\") with eight 10 mm holes\u003c\/li\u003e\n  \u003cli\u003eCenter hole: 54 mm (2.13\") and overall sprocket diameter 197 mm (7.76\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and precise is the YOXUFA sprocket hub?\u003c\/h3\u003e\n\u003cp\u003eManufactured from steel, the assembly is designed for resistant wear and reliable torque transfer under typical small-engine loads. The sprocket thickness and bolt pattern maintain chain alignment and reduce premature wear when installed and torqued correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: stamped\/formed steel for toughness and impact resistance\u003c\/li\u003e\n  \u003cli\u003eThickness: 6 mm (0.236\") for solid tooth profile support\u003c\/li\u003e\n  \u003cli\u003eTooth count: 48T sized for #40\/#41\/#420 chain compatibility\u003c\/li\u003e\n  \u003cli\u003eIncludes keyway, screws and nuts for proper mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what installation steps should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives ready to install with the sprocket and hub mated and the essential hardware included. Basic mechanical ability and common hand tools are sufficient; keep correct torque and alignment in mind for long life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 sprocket hub, 1 420-48T sprocket, 1 keyway\u003c\/li\u003e\n  \u003cli\u003eFasteners: 4 screws and 4 nuts for initial mounting\u003c\/li\u003e\n  \u003cli\u003eTools needed: socket\/wrench set, torque wrench recommended, and loctite optional\u003c\/li\u003e\n  \u003cli\u003eTip: Verify bolt circle and center hole clearance before tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does tooth count and chain size affect performance?\u003c\/h3\u003e\n\u003cp\u003eTooth count influences final drive ratio and torque delivered to the wheel; a 48T sprocket with #420 chain creates a balance of acceleration and top speed suitable for small-engine recreational vehicles. Using the correct chain width and tension prevents skipping and extends component life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e#420 chain compatibility prevents binding or rapid wear\u003c\/li\u003e\n  \u003cli\u003e48 teeth provide moderate gearing—good for versatile use\u003c\/li\u003e\n  \u003cli\u003eProper chain tension avoids tooth deformation and noise\u003c\/li\u003e\n  \u003cli\u003eMatch sprocket and chain pitch to avoid misalignment issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YOXUFA 48T 420 sprocket hub is aimed at hobbyists, repair technicians and DIY mechanics who maintain or restore Predator 212cc\/196cc powered mini bikes, go-karts, drift trikes and similar small-engine vehicles. It suits anyone replacing a worn sprocket or upgrading to a sturdy steel hub with a 1\" bore and 1\/4\" keyway, provided they confirm the bolt circle and center clearances on their axle and final drive components.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this sprocket compatible with #40 and #41 chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 48T sprocket is designed for #420 chain and is also compatible with #40\/#41 sizes when dimensions match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the hub include mounting hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes the sprocket hub, keyway, four screws and four nuts for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67587483926713,"sku":"B0B7M6QC76","price":104.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-view-sprocket-hub.jpg?v=1790509821"},{"product_id":"yoxufa-exhaust-header-muffler-for-predator-gx-420cc-direct-fit-steel-with-heat-shield","title":"YOXUFA Exhaust Header \u0026 Muffler for Predator\/GX 420cc — Direct-Fit Steel with Heat Shield","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA 420cc replacement exhaust header and muffler — a direct-fit, welded steel upgrade for Predator 301cc\/420cc and GX-series small engines that includes heat-shield tape and installation hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mini bike, go-kart, lawnmower, or water pump needs a durable exhaust swap, this YOXUFA assembly is built to match common OHV clone and OEM small engines while protecting nearby surfaces with included heat-shield tape. It’s engineered for engines such as Predator 301cc (8hp) and 420cc (13hp), GX240\/GX270\/GX390 and compatible clones, and it arrives with the fasteners and gasket required for a straightforward replacement. Note the critical 50 mm (1.96\") mounting-hole spacing before ordering to ensure bolt alignment.\u003c\/p\u003e\n\n\u003ch3\u003eWill this exhaust fit my engine and chassis?\u003c\/h3\u003e\n\u003cp\u003eCompatibility covers a range of small OHV engines and many clone variants, but fit depends on flange spacing and clearance in your frame. Confirm your engine’s mounting hole distance is 50 mm (1.96\"), not 46 mm, and check for enough space for the muffler body and heat shield.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Predator 301cc (8hp) and 420cc (13hp), GX240, GX270, GX390\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Briggs-style 1450 305cc and Lifan LF190F-BQ variants in many applications\u003c\/li\u003e\n  \u003cli\u003eRequired verification: flange bolt center-to-center = 50 mm (1.96\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and heat-resistant is the YOXUFA exhaust?\u003c\/h3\u003e\n\u003cp\u003eThe exhaust is manufactured with reinforced welds designed to resist typical vibration and stress encountered in small-engine use. A heat shield tape is included to reduce radiant heat transfer to nearby components or riders, and the muffler’s construction is intended for long service life under normal operating conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRobust welding at seams to minimize fatigue and cracking\u003c\/li\u003e\n  \u003cli\u003eIncludes heat-shield tape to protect legs, wiring, and nearby plastics\u003c\/li\u003e\n  \u003cli\u003eSupplied ties and clamps help keep the heat tape and hoses secure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with the exhaust header\/muffler and hardware so you can replace the assembly without hunting for parts. A wrench is included for basic assembly; however, you may want a socket set and torque wrench to ensure proper bolt tightness and gasket sealing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 YOXUFA exhaust, 1 muffler, heat shield tape, 4 ties, 2 screws, gasket, wrench\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: socket set, torque wrench, anti-seize or gasket sealant if desired\u003c\/li\u003e\n  \u003cli\u003eInstallation note: check bolt spacing and clearances before tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the heat shield tape help during use?\u003c\/h3\u003e\n\u003cp\u003eHeat shield tape reduces radiant heat and can prevent heat damage to legs, plastic guards, fuel lines, or nearby wiring. Applied to the muffler or pipes, it lowers surface temperature and directs heat away from sensitive parts without altering the exhaust flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWraps around the muffler or pipe to limit surface temperature\u003c\/li\u003e\n  \u003cli\u003eSecures with included ties for a tidy, durable installation\u003c\/li\u003e\n  \u003cli\u003eHelps keep nearby components and rider contact points cooler\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This YOXUFA 420cc exhaust and muffler kit is suited to DIY mechanics, small-vehicle restorers, and fleet owners working on mini bikes, go-karts, lawn and garden equipment, mud boats, or compact pressure washers with compatible OHV engines. Buy it if you need a welded, hardware-complete replacement that emphasizes correct fit (50 mm mounting spacing) and includes basic heat protection for safer use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the required mounting hole spacing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The exhaust requires a 50 mm (1.96\") center-to-center mounting hole spacing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include heat protection?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes heat-shield tape plus ties to protect nearby parts and legs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67587540025529,"sku":"B09QKN76KH","price":104.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-profile-exhaust-muffler.jpg?v=1790512288"},{"product_id":"yoxufa-420-mini-bike-chain-kit-red-42-90-link-front-rear-chains-heat-treated-alloy","title":"YOXUFA 420 Mini Bike Chain Kit — Red 42\/90-Link Front \u0026 Rear Chains, Heat-Treated Alloy","description":"\u003cp\u003e\u003cstrong\u003eThe YOXUFA 420 Chain Kit supplies a 90-link rear drive chain and a 42-link front jackshaft chain built from heat-treated alloy steel, designed as a drop-in replacement for many 196–212cc mini bikes and utility engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a durable, ready-to-install drive solution for Coleman CT200U, Predator 212, Baja\/TrailMaster, Massimo and similar mini bikes, this kit includes both chains plus the tools and hardware to fit and tension them correctly. The chains come bright red, come with a chain breaker, tensioner adjusters and master links, and are intended to reduce wear and prolong service life compared with standard replacement chains.\u003c\/p\u003e\n\n\u003ch3\u003eWhich bikes and engines is this chain kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis 420 chain set targets popular mini bike and small engine platforms that use 420 pitch drive chains. It fits a wide range of models from Coleman, Baja, TrailMaster, Massimo and several generic and aftermarket mini bikes. Check sprocket tooth counts and chain routing for exact fit before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon fits: Coleman CT200U \/ CT200U-EX, BT200X\u003c\/li\u003e\n  \u003cli\u003eBaja\/TrailMaster\/Massimo MB165, MB200 variants and Warrior\/Mini Baja trims\u003c\/li\u003e\n  \u003cli\u003eSmall 196–212cc engines such as Predator 212 and similar 6–7hp units\u003c\/li\u003e\n  \u003cli\u003eIncludes both 90-link rear and 42-link jackshaft chains for full drivetrain replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the build quality and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eYOXUFA ships these chains made from high-strength alloy steel with surface hardening to resist abrasive wear. The plates and pins are forged and heat-treated to improve tensile strength and fatigue life without adding excessive weight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForge-hardened links for improved break resistance\u003c\/li\u003e\n  \u003cli\u003eWear-resistant surface finish to slow elongation\u003c\/li\u003e\n  \u003cli\u003eMultiple master links included for secure joining and serviceability\u003c\/li\u003e\n  \u003cli\u003ePackaged in red finish for visibility and rust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and parts come with the kit, and is installation straightforward?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives ready to install with a compact chain breaker and two tensioner adjusters to help align and tension the chain correctly. Installation is intended for mechanically competent owners or mechanics familiar with mini bike drivetrains.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 x 90-link rear chain (red) and 1 x 42-link jackshaft chain (red)\u003c\/li\u003e\n  \u003cli\u003eAccessories: 1 chain breaker tool, 2 tensioner adjusters, 4 master links\u003c\/li\u003e\n  \u003cli\u003eTypical steps: remove old chain, size new chain, use breaker to remove excess links, fit master link and adjust tension\u003c\/li\u003e\n  \u003cli\u003eRecommended: verify sprocket condition and replace if worn for best life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I maintain these chains to get the longest life?\u003c\/h3\u003e\n\u003cp\u003eRoutine cleaning, correct tensioning and periodic lubrication are the best ways to extend chain life. Avoid long exposure to corrosive environments and inspect for tight links, pin wear, and elongation frequently if you ride often or in dusty conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLubricate with a chain-specific lubricant every few rides or after wet use\u003c\/li\u003e\n  \u003cli\u003eKeep correct slack per your bike manual — not too tight, not too loose\u003c\/li\u003e\n  \u003cli\u003eReplace sprockets when they show hooked or uneven teeth\u003c\/li\u003e\n  \u003cli\u003eUse the included tensioners to keep alignment and reduce premature wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YOXUFA 420 Chain Kit is aimed at mini bike owners, backyard mechanics, small shop technicians and powersports enthusiasts who need a comprehensive, cost-effective drivetrain replacement for 196–212cc mini bike platforms. If you want both front jackshaft and rear drive chains in matching finish, plus the tools and master links to fit them without searching for parts, this kit offers a practical, ready-to-install option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit my Predator 212 engine mini bike?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the YOXUFA 420 kit is compatible with many 196–212cc mini bikes, including Predator 212 models that use 420 pitch chains.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the master links and tools included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the package includes four 420 master links, a chain breaker tool and two tensioner adjusters for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67587777069241,"sku":"B0F9N8T7SH","price":85.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-packaging-chain-kit.jpg?v=1790515334"},{"product_id":"yoxufa-pz22-22-mm-carburetor-kit-for-110-125cc-pit-bikes-atvs-right-side-choke-throttle-cable-filter","title":"YOXUFA PZ22 22 mm Carburetor Kit for 110–125cc Pit Bikes \u0026 ATVs — Right‑Side Choke, Throttle Cable \u0026 Filter","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA PZ22 is a complete 22 mm replacement carburetor kit designed to fit a wide range of 110cc–125cc four-stroke pit bikes and ATVs, including TaoTao, SSR, Coolster, Coleman, Apollo and similar Chinese models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis aftermarket carburetor package supplies everything needed to replace a worn or damaged carb on many popular small four-stroke engines. The kit centers on a 22 mm inside-diameter carburetor with a right-side hand choke and includes the intake filter, throttle assembly, fuel fittings and useful extras so you can install quickly and get back on the trail.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my 110cc or 125cc bike or quad?\u003c\/h3\u003e\n\u003cp\u003eThe PZ22 is built for a broad set of 110–125cc four-stroke Chinese-engine machines. It is compatible with several TaoTao, SSR, Coolster, Coleman, Apollo and X-pro models commonly sold as pit bikes and small ATVs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarb body inside diameter: 22 mm (PZ22 standard).\u003c\/li\u003e\n  \u003cli\u003eBolt spacing side-to-side: 48 mm between mounting holes.\u003c\/li\u003e\n  \u003cli\u003eIncluded air filter outlet diameter: 38 mm for common intake boots.\u003c\/li\u003e\n  \u003cli\u003eWorks with many SSR 110\/125, TaoTao DB14\/DB24, X-pro Hawk and similar models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and what do I need for installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives as a mostly plug-and-play replacement containing the carburetor and a full set of auxiliary components to simplify installation. You’ll still need basic hand tools and a few minutes to swap parts and route cables.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComplete carburetor with right-side hand choke.\u003c\/li\u003e\n  \u003cli\u003eAir filter, fuel line, fuel filters (2), clamps (4) and gasket set.\u003c\/li\u003e\n  \u003cli\u003eThrottle cable (127 cm \/ 50 in), throttle grip pair, on-off switch and spark plug included.\u003c\/li\u003e\n  \u003cli\u003eSmall accessories: wrench and six zip ties to secure hoses and wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the throttle and choke setup work for daily riding?\u003c\/h3\u003e\n\u003cp\u003eThe PZ22 uses a 22 mm throttle grip fitting (7\/8\") and a long throttle cable for flexible routing on different handlebars. The choke lever is mounted on the right side of the carburetor housing—confirm your current choke orientation before purchase to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThrottle grip size: 22 mm (7\/8 inch) standard for many pit bikes\/ATVs.\u003c\/li\u003e\n  \u003cli\u003eThrottle cable length: 127 cm (50 inches) for varied frame layouts.\u003c\/li\u003e\n  \u003cli\u003eRight-side manual choke—verify left\/right position on your existing carb.\u003c\/li\u003e\n  \u003cli\u003eIncludes clamps and filters to limit fuel contamination and leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This YOXUFA PZ22 carburetor kit suits DIY mechanics, small-shop technicians and riders who own 110cc–125cc four-stroke pit bikes or ATVs that need a reliable replacement carburetor and throttle assembly. If you have a TaoTao, SSR, Coolster, Coleman, Apollo, Mountopz or similar model and require a straightforward swap with most accessories included, this kit provides the core parts to restore fuel delivery and throttle control. Note: check the choke orientation and mounting hole spacing on your machine before ordering to ensure a correct fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size is the carburetor Bore and throttle grip?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The carburetor bore is 22 mm and the throttle grip fits 22 mm (7\/8\") handlebars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include a choke and where is it located?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The carburetor has a manual hand choke mounted on the right side.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67587862036665,"sku":"B0CHVYSSFK","price":81.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-pz22-front-carburetor.jpg?v=1790515627"},{"product_id":"yoxufa-metal-gas-tank-kit-for-50-125cc-atvs-complete-fuel-tank-assembly-with-cap-filter-petcock","title":"YOXUFA Metal Gas Tank Kit for 50–125cc ATVs — Complete Fuel Tank Assembly with Cap, Filter \u0026 Petcock","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA metal gas tank kit is a complete replacement fuel tank assembly with cap, filter, line, clips and petcock designed for many 50–125cc Chinese ATVs and small engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact fuel system kit replaces worn or damaged tanks and fittings commonly found on TaoTao, Coolster, Kazuma and similar 50cc–125cc quads, go-karts and lawnmowers. Built from high-strength metal and supplied with matching hardware, the set aims to restore safe fuel storage and reliable flow for small-engine machines. Check measurements and fitment details before installation to ensure compatibility with your exact model.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this tank kit match my ATV model?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit was produced to fit a broad range of Chinese-style 50cc–125cc ATVs and small machines, including TaoTao, Coolster, Buyang, Kazuma and others. Compatibility depends on mounting points, inlet\/outlet positions and overall tank dimensions—so confirming those against your machine is important.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits many 50cc, 70cc, 90cc, 110cc and 125cc ATV models.\u003c\/li\u003e\n  \u003cli\u003eCompatible brands: TaoTao, Coolster, Buyang, Sunl, PeaceSport, Roketa, Kazuma, JD and similar.\u003c\/li\u003e\n  \u003cli\u003eCheck physical tank measurements and petcock inlet orientation before buying.\u003c\/li\u003e\n  \u003cli\u003eSuitable for lawnmower conversions using similar fuel plumbing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat parts are included and why they matter?\u003c\/h3\u003e\n\n\u003cp\u003eThis is a full replacement kit so you receive the core tank plus the small components needed for installation and fuel delivery. Having all matched parts in one package simplifies swapping a damaged tank without hunting down separate items.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 metal gas tank sized for 50–125cc small engines.\u003c\/li\u003e\n  \u003cli\u003e1 matching breath-style gas cap to control venting.\u003c\/li\u003e\n  \u003cli\u003e1 in-line fuel filter to catch debris before the carburetor.\u003c\/li\u003e\n  \u003cli\u003e1 fuel hose, 4 hose clips and 1 fuel pump petcock for connection and sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and leak-resistant is the metal construction?\u003c\/h3\u003e\n\n\u003cp\u003eThe tank is manufactured from high-strength metal and finished to resist impact and wear common on off-road machines. Quality control focuses on ensuring proper seals and durable fittings, but age, improper installation or incompatible mounting can still cause leaks—inspect seals and hose clamps after fit-up.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMetal body offers greater impact resistance than thin plastic tanks.\u003c\/li\u003e\n  \u003cli\u003eSupplied cap and clips help create a secure seal when installed correctly.\u003c\/li\u003e\n  \u003cli\u003eInspect the petcock and filter seals for tightness before first use.\u003c\/li\u003e\n  \u003cli\u003eReplace any worn gaskets or cracked hoses rather than reusing damaged parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I install this myself and what tools are needed?\u003c\/h3\u003e\n\n\u003cp\u003eMany mechanically inclined owners can install the tank using basic hand tools, though procedures vary by model. Plan for safe drainage of old fuel, secure mounting, and proper routing of the fuel line to avoid kinks and rubbing points.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBasic tools: screwdrivers, pliers, socket set and hose clamp tool or screwdriver for clips.\u003c\/li\u003e\n  \u003cli\u003eDrain old fuel into a certified container before removing the existing tank.\u003c\/li\u003e\n  \u003cli\u003eVerify petcock orientation and hose routing to prevent chafing and pinches.\u003c\/li\u003e\n  \u003cli\u003eTest for leaks with a small fuel amount before full refilling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This YOXUFA metal gas tank kit is aimed at owners of Chinese-style 50–125cc ATVs, go-karts and small riding lawnmowers who need a robust, all-in-one replacement tank with matching cap, filter, hose, clips and petcock. It's best for DIY mechanics and repair shops replacing a damaged tank or upgrading from a failing plastic tank. Always compare your machine’s tank mounting and outlet dimensions with the product before purchase to confirm fitment and safe installation.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this tank fit my TaoTao 110cc ATV?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Probably—this kit is made for many 110cc TaoTao models, but confirm tank mounting points and inlet orientation against your bike before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include a petcock and fuel filter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the kit includes a petcock, an in-line fuel filter, fuel line and four hose clips for immediate installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67588180312249,"sku":"B09Y8V9GHQ","price":87.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-metal-gas-tank-front-view.jpg?v=1790516963"},{"product_id":"yoxufa-420-chain-132-link-red-for-50-125cc-pit-bikes-atvs-alloy-steel-includes-master-links-breaker","title":"YOXUFA 420 Chain 132-Link Red for 50–125cc Pit Bikes \u0026 ATVs — Alloy Steel, Includes Master Links \u0026 Breaker","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA 420 Chain 132 Link is a heavy-duty replacement chain kit designed to fit a wide range of 50cc–125cc pit bikes, ATVs, mini bikes and small go-karts, supplied with master links and a chain breaker for custom length adjustments.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement 420 chain comes in a vivid red finish and includes everything needed to install and trim the chain to your vehicle: a complete 132-link length, ten master links, a thimble, and a compatible chain breaker tool. Constructed from alloy steel with surface treatments for improved wear resistance, the chain is intended for small-displacement four-stroke machines commonly used in off-road and recreational riding. The listing emphasizes cross-brand fitment to many Chinese-made and popular mini-bike and ATV models.\u003c\/p\u003e\n\n\u003ch3\u003eWhich bikes and vehicles will this 420 chain fit?\u003c\/h3\u003e\n\u003cp\u003eThe 132-link 420 chain is built for mini and small-displacement machines. It covers a broad set of models from manufacturers commonly used in the pit-bike and mini ATV market, plus several mini bike and go-kart platforms after refit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 50cc–125cc pit dirt bikes and ATVs including SSR, TaoTao, Coolster, Apollo, Baj a-type clones, Kazuma, SYX and Roket models.\u003c\/li\u003e\n  \u003cli\u003eFits common Honda-style small frames like CRF50\/CRF70\/CRF80 and XR50\/XR70 when chain size matches.\u003c\/li\u003e\n  \u003cli\u003eWorks as a replacement on mini bikes and go-karts such as Coleman CT200U series, Baja MB165\/MB200, Hensim MB165\/MB200 and similar models after proper refit.\u003c\/li\u003e\n  \u003cli\u003eVerify sprocket tooth count and axle spacing before installation to confirm fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is the chain for off-road use?\u003c\/h3\u003e\n\u003cp\u003eThe chain is manufactured from alloy steel and receives a surface hardening process intended to resist wear and extend service life. While not a branded OEM chain, the construction focuses on toughness for trail and recreational riding where moderate loads and debris exposure are common.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel links for strength under repeated loads and accelerations.\u003c\/li\u003e\n  \u003cli\u003eSurface treatment to improve resistance to abrasion and corrosion in muddy or dusty conditions.\u003c\/li\u003e\n  \u003cli\u003eComes in a full-length 132-link size so you can set the correct tension by removing links as needed.\u003c\/li\u003e\n  \u003cli\u003eIncludes ten master links to secure joints and distribute spares for future repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and items are included, and how do I shorten the chain?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with a manual chain breaker compatible with 420–530 chains, so you can remove pins and shorten the chain to match your sprockets and swingarm length. A thimble and multiple master links are included to finish the connection cleanly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × 420 chain (red) — full 132-link length ready to trim.\u003c\/li\u003e\n  \u003cli\u003e10 × 420 master links — spare links included for secure joints.\u003c\/li\u003e\n  \u003cli\u003e1 × 420 chain breaker tool — aligns pins and pushes them out safely; instructions pictured in the listing.\u003c\/li\u003e\n  \u003cli\u003e1 × 420 thimble for a neat, reinforced loop where applicable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I inspect and maintain this chain after installation?\u003c\/h3\u003e\n\u003cp\u003eRegular checks and basic upkeep will keep the chain performing reliably. Inspect for proper tension, even wear across links, and corrosion; lubricate periodically and replace if pins or rollers show significant play.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck tension and alignment after the first 50–100 miles and adjust as the chain seats.\u003c\/li\u003e\n  \u003cli\u003eLubricate the chain with a suitable chain lube to reduce friction and corrosion.\u003c\/li\u003e\n  \u003cli\u003eLook for tight spots, bent links, or excessive elongation and replace if detected.\u003c\/li\u003e\n  \u003cli\u003eKeep sprocket tooth profiles matched — replace sprockets if teeth are hooked or worn.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YOXUFA 420 chain kit is aimed at owners of small off-road bikes, ATVs, mini bikes and go-karts who need an affordable, full-length replacement chain with tools and spare master links included. It suits hobbyists and weekend riders who perform their own maintenance and want the flexibility to refit chain length for a variety of Chinese-brand and aftermarket platforms.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this 420 chain fit my Coleman CT200U mini bike?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the chain is listed as compatible with Coleman CT200U and similar models after refit. Confirm sprocket sizes and axle spacing before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I shorten the 132-link chain myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes a chain breaker compatible with 420–530 chains and instructions to remove pins and adjust length safely.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67588646207673,"sku":"B0F8T7C57J","price":90.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-red-420-chain-full-length.jpg?v=1790521878"},{"product_id":"yoxufa-mini-bike-sprocket-60t-kit-with-420-90-link-chain-direct-fit-for-coleman-ct200u-more-low-end-torque","title":"YOXUFA Mini Bike Sprocket 60T Kit with 420 90‑Link Chain — Direct Fit for Coleman CT200U, More Low-End Torque","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's 60-tooth rear sprocket paired with a 420 90-link chain is a direct-replacement drivetrain upgrade for many 196–212cc mini bikes, delivering stronger torque and reliable fitment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned as a full replacement kit for popular small-engine bikes, this package includes a precision-machined 60T sprocket, a 420-format chain with 90 links, a master link, and a chain breaker tool. It’s engineered to swap directly onto Coleman CT200U series models, Predator 196\/212cc engines, Baja and TrailMaster mini bikes, Massimo MB200 and similar platforms that use the 420 chain standard. The larger 60-tooth sprocket modifies final drive ratio to favor pulling power without requiring complex modifications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does switching to a 60-tooth sprocket change performance?\u003c\/h3\u003e\n\u003cp\u003eMoving from a smaller rear sprocket to this 60T increases mechanical advantage at the wheel, producing stronger low-end torque and easier hill-climbing. Top speed will typically decrease slightly while acceleration and load-handling improve, which is useful for off-road or heavy-duty riding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMore torque for inclines and rough terrain\u003c\/li\u003e\n  \u003cli\u003eSlower top speed but quicker, stronger acceleration\u003c\/li\u003e\n  \u003cli\u003eImproved control when hauling or carrying weight\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on fit for compatible hubs—no major modification\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this sprocket and chain fit my Coleman or Predator-powered mini bike?\u003c\/h3\u003e\n\u003cp\u003eThe kit is intended for mini bikes using a 420 chain around 196–212cc engines; compatibility includes Coleman CT200U, BT200X, CT200U-EX, Predator 212\/196cc, Baja MB165\/MB200, Massimo MB200, TrailMaster MB200, Axis M200 and similar models. Always confirm your bike uses a 420 chain and the same hub bolt pattern before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e420 chain standard—90-link length included\u003c\/li\u003e\n  \u003cli\u003eFits many Coleman CT200U variants and Predator 196\/212 setups\u003c\/li\u003e\n  \u003cli\u003eCompatible with common mini bike hubs on listed models\u003c\/li\u003e\n  \u003cli\u003eCheck bolt pattern and engine sprocket size for exact compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and design features improve durability?\u003c\/h3\u003e\n\u003cp\u003eThe sprocket is milled from a hardened metal alloy and the chain is made to industry 420 specifications, offering resistance to wear under typical off-road stresses. Tooth profiles are precision cut to maintain chain alignment, reducing the chance of derailment and extending service life with correct maintenance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecision-machined tooth geometry for consistent engagement\u003c\/li\u003e\n  \u003cli\u003eDurable alloy construction resists bending and wear\u003c\/li\u003e\n  \u003cli\u003e420 chain links treated for longevity under load\u003c\/li\u003e\n  \u003cli\u003eIncludes extra master link and chain breaker for maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what’s included to help?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone with basic mechanical skills and common mini bike tools. The kit supplies the chain, a replacement master link, and a chain breaker to split and size the chain; you’ll need normal socket tools and possibly a torque wrench for final fasteners.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with chain breaker and spare master link for cutting and joining\u003c\/li\u003e\n  \u003cli\u003eDirect-replacement design minimizes additional parts or fabrication\u003c\/li\u003e\n  \u003cli\u003eBasic hand tools required—no specialty presses needed\u003c\/li\u003e\n  \u003cli\u003eFollow torque specs and chain tension guidance from your bike manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: riders who want stronger low-end performance from their mini bike, mechanics performing drivetrain replacement, and customers updating worn sprockets and chains on Coleman, Predator, Baja, TrailMaster, Massimo and similar small-engine bikes. If you need more pulling power for hills, off-road work, or to recover traction in uneven terrain, this YOXUFA 60T sprocket and 420-90 chain kit provides a practical, durable upgrade without extensive modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit Predator 212cc engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this 60T sprocket and 420 90-link chain are compatible with many Predator 196\/212cc mini bike setups that use a 420 chain standard.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is a chain breaker included for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the kit includes a chain breaker tool and an extra master link to cut and join the chain during installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67588915757241,"sku":"B0D3PL812J","price":87.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-sprocket-chain-kit.jpg?v=1790527783"},{"product_id":"yoxufa-pz19-carburetor-for-50-125cc-atvs-pit-bikes-includes-35mm-air-filter-spark-plug-kit","title":"YOXUFA PZ19 Carburetor for 50–125cc ATVs \u0026 Pit Bikes — Includes 35mm Air Filter, Spark Plug Kit","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA PZ19 is a replacement carburetor kit designed to improve fuel metering and restore throttle response on 50cc–125cc Chinese ATVs, pit bikes and quads.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact PZ19 carburetor from YOXUFA is built to work with a wide range of small-displacement engines used in Tao Tao, Coolster, Apollo, SSR, Baja, Kazuma and similar Chinese-made ATVs, pit bikes and go-karts. The kit includes a 35 mm air filter, fuel lines, clamps, spark plug, oil switch and the fittings needed for a straightforward installation so you can get your machine back on the trail without hunting for extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat bikes and ATVs will this carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThe PZ19 is intended for many 50cc, 70cc, 110cc and 125cc Chinese-style bikes and quads. It is commonly used on Tao Tao, Coolster, Apollo, SSR, Baja, Kazuma, X-Pro, XMotos and similar models. Note that this unit is not compatible with GY6 engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 50cc–125cc single-cylinder, air-cooled engines.\u003c\/li\u003e\n  \u003cli\u003eWorks with pit bikes, dirt bikes, ATVs and go-karts from listed brands.\u003c\/li\u003e\n  \u003cli\u003e125cc variant features a hand choke for easier cold starts.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for GY6 engine families.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this PZ19 carburetor affect fuel economy and throttle feel?\u003c\/h3\u003e\n\u003cp\u003eThe PZ19 is sized to deliver a balanced air-fuel mix for small-displacement engines, often yielding smoother throttle response and improved fuel efficiency compared with larger PZ22-style carburetors. Proper jetting and air-fuel adjustment help restore factory-like performance after wear or clogging of the original carb.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmaller venturi size promotes more efficient fuel atomization in low-displacement engines.\u003c\/li\u003e\n  \u003cli\u003eAdjustable air mix and idle screws let you tune running conditions.\u003c\/li\u003e\n  \u003cli\u003eCan reduce hesitation and uneven idle when installed and jetted correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and what tools are needed for installation?\u003c\/h3\u003e\n\u003cp\u003eThe YOXUFA package includes the carburetor plus a range of installation parts so you typically won’t need to source many extras. Basic hand tools and a little mechanical familiarity are enough to complete the swap on most small bikes and quads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: PZ19 carburetor, 35 mm air filter, fuel line, two fuel filters, four clamps, gasket set, spark plug, oil switch and wrench.\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: screwdrivers, pliers, socket set, and a small torque wrench for clamps.\u003c\/li\u003e\n  \u003cli\u003eAllow time to rejet and fine-tune air-fuel mixture after installation for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain and tune the carburetor for reliable performance?\u003c\/h3\u003e\n\u003cp\u003eRoutine maintenance keeps a carburetor running well: clean the passages, replace fuel filters, and inspect clamps and gaskets. After installation, start with the factory jetting if available, then make small adjustments to the idle and air-fuel screw until the engine runs smoothly across throttle ranges.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean or replace in-line fuel filters regularly to prevent clogs.\u003c\/li\u003e\n  \u003cli\u003eInspect and tighten clamps and gaskets to avoid air leaks.\u003c\/li\u003e\n  \u003cli\u003eMake incremental jetting changes and test ride between adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YOXUFA PZ19 carburetor kit is intended for riders, mechanics and hobbyists who own or service small Chinese-made dirt bikes, pit bikes, ATVs and go-karts in the 50–125cc range. It’s a practical replacement when the original carburetor is worn, leaking, clogged or when a more responsive idle and better fuel metering are needed. Avoid using this part on GY6 engines and consult your model’s service manual for proper jetting and choke setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor compatible with GY6 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The PZ19 is not compatible with GY6 engine families.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes the carburetor, 35 mm air filter, fuel line, filters, clamps, gaskets, spark plug, oil switch and a wrench.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67589453775033,"sku":"B0CZ676BWM","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-pz19-front-view.jpg?v=1790530360"},{"product_id":"yoxufa-pz19-19mm-carburetor-for-50-125cc-pit-bikes-atvs-35mm-air-filter-and-installation-kit","title":"YOXUFA PZ19 19mm Carburetor for 50-125cc Pit Bikes \u0026 ATVs — 35mm Air Filter and Installation Kit","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA PZ19 is a 19mm carburetor kit engineered to replace worn or incorrect carbs on 50–125cc pit bikes, ATVs and go-karts, offering easier tuning and improved fuel efficiency over larger PZ22-style units.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you run a small-displacement dirt bike, quad or mini ATV built on popular Chinese platforms, swapping in the YOXUFA PZ19 restores throttle response and allows closer air–fuel tuning. This kit ships as a complete replacement assembly with an attached 35 mm air filter, fuel lines, clamps, spark plug and basic tools so you can install it without scavenging parts from the old carburetor.\u003c\/p\u003e\n\n\u003ch3\u003eWill the PZ19 fit my bike or ATV?\u003c\/h3\u003e\n\u003cp\u003eYes — the PZ19 is designed for a wide range of small-displacement machines. It suits many 50cc, 70cc, 110cc and 125cc Chinese-built pit bikes, ATVs and quads when the engine uses a vertical intake and a small-diameter carburetor mount.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible platforms: Tao Tao, Coolster, Apollo, Baja, SSR, Kazuma, Sunl, Roketa, Redcat, X-Motos, X-Pro and similar models.\u003c\/li\u003e\n  \u003cli\u003eIntended for carbureted 50–125cc engines (NOT for GY6 scooter engines).\u003c\/li\u003e\n  \u003cli\u003eCheck manifold diameter and throttle\/bolt pattern before purchase for guaranteed fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit improve fuel economy and throttle feel?\u003c\/h3\u003e\n\u003cp\u003eThe PZ19’s smaller 19mm throat size promotes slightly higher air velocity at low-to-mid RPMs compared with larger PZ22 models, helping the engine atomize fuel more effectively during everyday riding. That often translates to smoother throttle response and modest fuel savings when tuned correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmaller bore favors low-end and midrange combustion efficiency.\u003c\/li\u003e\n  \u003cli\u003eAdjustable idle and air-mixture screws let you fine-tune running lean\/rich balance.\u003c\/li\u003e\n  \u003cli\u003eHand-choke design simplifies cold starts without electrical choke circuitry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what tools are included?\u003c\/h3\u003e\n\u003cp\u003eThe YOXUFA PZ19 kit arrives with the carburetor fully assembled to a 35 mm foam-style air filter and a kit of installation accessories so you won’t need to hunt for small parts. A basic wrench is included to speed up the swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × PZ19 carburetor with 35 mm air filter attached.\u003c\/li\u003e\n  \u003cli\u003eFuel line, two fuel filters, four clamps, a gasket set, a spark plug, an oil switch and a wrench.\u003c\/li\u003e\n  \u003cli\u003eHand-choke lever pre-fitted; no electrical wiring for choke required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain and tune the PZ19 for best results?\u003c\/h3\u003e\n\u003cp\u003eRoutine cleaning and occasional jetting adjustments deliver the best longevity and performance. Start with factory-recommended jets for your engine size, then fine-tune the air mixture and idle for local elevation and fueling characteristics.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect and replace fuel filters regularly to prevent clogging.\u003c\/li\u003e\n  \u003cli\u003eClean the float bowl periodically and check float height when changing jets.\u003c\/li\u003e\n  \u003cli\u003eAdjust idle screw and pilot jet for smooth throttle transitions and idle stability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YOXUFA PZ19 suits owners of small-displacement dirt bikes, pit bikes, Chinese ATVs and mini quads who need a dependable replacement carburetor that’s simple to fit and tune. It’s a practical option for riders seeking improved low-end response and slightly better fuel economy than larger 22mm carburetors, mechanics performing routine service on budget-friendly machines, and hobbyists building or restoring 50–125cc off-road vehicles. Not appropriate for GY6 scooter engines or applications requiring electronic choke systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the YOXUFA PZ19 a direct swap for my 110cc pit bike?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually yes if your intake uses a small vertical carb mount; confirm manifold diameter and bolt pattern before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor have an electric choke?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the PZ19 kit uses a hand-operated choke lever for manual cold starts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67589776507065,"sku":"B0CZ6PH738","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-carburetor-front-assembly.jpg?v=1790531589"},{"product_id":"yoxufa-420-chain-132-link-gold-replacement-for-50-150cc-mini-bikes-atvs-alloy-steel-includes-master-links-breaker","title":"YOXUFA 420 Chain 132-Link Gold Replacement for 50–150cc Mini Bikes \u0026 ATVs — Alloy Steel, Includes Master Links \u0026 Breaker","description":"\u003cstrong\u003eYOXUFA 420 Chain (132 links) is a heavy‑duty gold replacement chain engineered to revive mini bikes, pit bikes, ATVs and go‑karts that use 420‑series drive chains.\u003c\/strong\u003e\n\n\u003cp\u003eThis 420 chain is built from durable alloy steel and finished for improved wear resistance, delivering a longer service life for 50cc–150cc small engines, including common SSR, TaoTao, Coolster, Apollo, Baja and many Coleman\/Massimo mini bike models. The kit arrives ready for trimming and installation, complete with master links and a chain breaker so you can size the chain precisely to your machine.\u003c\/p\u003e\n\n\u003ch3\u003eWill this chain fit my 110cc or 125cc pit bike?\u003c\/h3\u003e\n\u003cp\u003eYes — the 420 chain is a standard size used by many small four‑stroke dirt bikes and ATVs. It fits numerous models after appropriate adjustment and refitting, especially popular Chinese and Japanese mini‑bike platforms.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with SSR, TaoTao, Coolster, Apollo, Baja, Kazuma and similar brands.\u003c\/li\u003e\n  \u003cli\u003eWorks with CRF\/XR style 50–80\/70 models and 110–125cc pit bikes after installation tweaks.\u003c\/li\u003e\n  \u003cli\u003eIncludes 132 links to allow trimming to correct pitch and length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to size and install the chain?\u003c\/h3\u003e\n\u003cp\u003eYOXUFA includes tools and hardware to make cutting and joining straightforward for someone comfortable with basic mechanical tasks. The supplied chain breaker and master links let you trim and rejoin the chain without needing specialty shop tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComes with a 420 chain breaker suitable for 420–530 sizes for pin removal.\u003c\/li\u003e\n  \u003cli\u003eIncludes 10 master links and a thimble for secure reconnection.\u003c\/li\u003e\n  \u003cli\u003eFollow alignment of center pillar and bottom hole in breaker to avoid pin damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat construction and durability features does this chain offer?\u003c\/h3\u003e\n\u003cp\u003eThe chain is manufactured from alloy steel with surface treatment to resist wear and extend lifespan under normal riding conditions. It’s designed to handle the loads typical of mini bikes, go‑karts and small ATVs without premature stretching.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy‑duty alloy steel for strength under torque and load.\u003c\/li\u003e\n  \u003cli\u003eSpecial surface treatment improves abrasion resistance and longevity.\u003c\/li\u003e\n  \u003cli\u003eGold finish for corrosion protection and a distinctive look.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s included in the package and why it matters?\u003c\/h3\u003e\n\u003cp\u003eThis kit supplies everything you need to size and fit the chain yourself, reducing extra parts purchases and minimizing downtime. Multiple master links provide spares, and the included breaker allows trimming to the exact length required by your sprockets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × 420 chain, gold, 132 links — ready to cut to length.\u003c\/li\u003e\n  \u003cli\u003e10 × 420 master links so you can rejoin the chain securely or keep spares.\u003c\/li\u003e\n  \u003cli\u003e1 × chain breaker for 420–530 sizes and 1 × thimble for installation support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders, hobbyists and small‑vehicle mechanics who need a reliable, serviceable replacement drive chain for mini bikes, pit bikes, ATVs and go‑karts. It’s especially suited for owners of SSR, TaoTao, Coolster, Apollo, Baja, Coleman CT200U and similar machines who want a durable aftermarket chain and the basic tools to fit it themselves.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the chain include tools to cut to length?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a 420 chain breaker suitable for 420–530 sizes plus a thimble and master links for rejoining.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this chain compatible with Coleman CT200U and Baja MB200?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. After refit and correct sizing, the 420 chain fits CT200U, MB200 and many similar mini‑bike and go‑kart models.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67590999703737,"sku":"B0F8SZPV49","price":79.43,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-420-chain-front-packaging.jpg?v=1790540133"},{"product_id":"yoxufa-pz19-19mm-carburetor-kit-for-50-125cc-atvs-pit-bikes-35mm-air-filter-spark-plug","title":"YOXUFA PZ19 19mm Carburetor Kit for 50–125cc ATVs \u0026 Pit Bikes — 35mm Air Filter, Spark Plug","description":"\u003cp\u003e\u003cstrong\u003eThe YOXUFA PZ19 is a 19 mm hand-choke carburetor kit designed to replace worn or damaged carbs on many 50–125cc Chinese ATVs, pit bikes, and go-karts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement carburetor kit includes the 19 mm PZ19 carb body plus a 35 mm foam air filter, fuel line, inline fuel filter, gasket set, and a spark plug — everything needed for a drop-in swap on compatible small-displacement engines. It’s built to match the common intake and filter diameters used across TaoTao, Coolster, Baja, SSR, Kazuma and many other Chinese-brand quads, dirt bikes and mini-motorcycles, making it a practical spare part for routine repairs and restorations.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my 110cc or 125cc TaoTao ATV or pit bike?\u003c\/h3\u003e\n\n\u003cp\u003eMost TaoTao models that use a PZ19-style carb will accept this unit, especially the 110–125cc TaoTao dirt bikes and ATVs listed in the compatibility notes. Check your engine’s intake diameter and the model references before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits many TaoTao models including DB10, DB24 and ATA-110\/125 series.\u003c\/li\u003e\n  \u003cli\u003eIntake inside diameter: 19 mm — matches standard PZ19 manifolds.\u003c\/li\u003e\n  \u003cli\u003eIncludes 35 mm air filter to suit common airbox sizes.\u003c\/li\u003e\n  \u003cli\u003eNot compatible with GY6-style engines — verify your engine type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation for a home mechanic?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic small-engine maintenance. The kit arrives with the main parts needed for a direct swap; you’ll need basic hand tools, a clean work area and a short tune-up afterward to adjust idle and mixture.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHand-choke design requires no electrical choke wiring.\u003c\/li\u003e\n  \u003cli\u003eIncludes fuel line and inline filter for quick hookup.\u003c\/li\u003e\n  \u003cli\u003eGasket set provided to ensure a sealed intake connection.\u003c\/li\u003e\n  \u003cli\u003eRecommended: carb cleaner, screwdrivers, pliers and a basic wrench set.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exact hardware and measurements come with the kit?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit is packaged for convenience: the 19 mm carburetor body, a 35 mm outer-diameter foam air filter, red fuel line and inline fuel filter, a gasket set to match common intake flanges, plus a replacement spark plug. Outer dimensions and filter sizes are listed so you can confirm fitment with your airbox and intake manifold.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCarb intake internal diameter: 19 mm.\u003c\/li\u003e\n  \u003cli\u003eCarb outer diameter (filter mounting side): 32 mm; filter outer diameter supplied: 35 mm.\u003c\/li\u003e\n  \u003cli\u003eIncludes spark plug and fuel filter for full basic servicing.\u003c\/li\u003e\n  \u003cli\u003eGasket set ensures airtight seal for a reliable install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I check compatibility before buying?\u003c\/h3\u003e\n\n\u003cp\u003eBefore purchasing, compare your bike or ATV’s current carburetor measurements and model references to the kit specifications. If your engine uses a GY6-style carb or a different bore size, this PZ19 kit will not fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirm intake bore is approximately 19 mm internal diameter.\u003c\/li\u003e\n  \u003cli\u003eCross-check model lists: TaoTao, Coolster, Baja, SSR, Kazuma, Kymco and similar Chinese brands.\n  \u003c\/li\u003e\n  \u003cli\u003eMeasure your airbox or filter flange to ensure the 35 mm filter will seat correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This carburetor kit is intended for owners and DIY mechanics who maintain small-displacement ATVs, pit bikes, go-karts and scooters from brands like TaoTao, Coolster, Baja, SSR, Kazuma and other similar Chinese manufacturers. It suits anyone needing a reliable replacement for a clogged, leaking or damaged PZ19-style carb, and it’s also useful for shops that service multiple models where a standard 19 mm carburetor is required. If you need an exact factory match for a GY6 engine or have unusual custom intake plumbing, confirm measurements or consult a mechanic before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor compatible with GY6 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The YOXUFA PZ19 kit is not compatible with GY6-style engines; verify your engine type before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include an air filter and spark plug?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a 35 mm air filter, red fuel line, inline fuel filter, gasket set, and a spark plug.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67591118291129,"sku":"B0BZVHW9RN","price":62.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-carburetor-front-view_80ba284b-17b5-4bdc-9102-f4229d0c1356.jpg?v=1790541661"},{"product_id":"yoxufa-420-chain-kit-for-mini-bike-42-link-jackshaft-90-link-rear-includes-master-links-breaker-tensioners","title":"YOXUFA 420 Chain Kit for Mini Bike — 42-link Jackshaft + 90-link Rear, Includes Master Links, Breaker \u0026 Tensioners","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's 420 chain kit replaces both the jackshaft 42-link and rear 90-link chains, supplying master links, tensioners and a breaker for a ready-to-install mini bike drivetrain upgrade.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for popular 200cc–212cc mini bikes and small engines, this comprehensive chain pack provides the correct lengths and tools to swap worn chains quickly. The kit targets Coleman CT200U series, BT200X, Baja\/Warrior\/MB200 models and many Predator and Hensim-powered bikes, combining durable materials with included hardware so you can adjust, secure and maintain the new chains without extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhich mini bikes and engines will this chain set fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is meant for a wide range of small-frame off-road and recreational mini bikes that use 420 chain sizes. It fits Coleman Powersports CT200U, CT200U-EX, BT200X, several Baja Motorsports mini bikes, Hensim MB165\/MB200, Massimo and TrailMaster MB200 models as well as bikes powered by Predator 196cc\/212cc 6.5hp engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes both 42-link (jackshaft) and 90-link (rear drive) chains for direct replacement.\u003c\/li\u003e\n  \u003cli\u003eCompatible with popular Coleman CT200U family and BT200X models.\u003c\/li\u003e\n  \u003cli\u003eWorks with Predator 196cc\/212cc and similar 200cc class powerplants.\u003c\/li\u003e\n  \u003cli\u003eAlso fits MB165\/MB200 variants from multiple manufacturers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the chain and how was it made?\u003c\/h3\u003e\n\u003cp\u003eThe chains combine a robust base alloy with a hardened surface layer for extended wear resistance and longer service life. Manufacturing involves repeated forging and strict material controls to maintain tensile strength and consistent link quality under drive loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength base material with hardened surface treatment for wear reduction.\u003c\/li\u003e\n  \u003cli\u003eForged links and controlled production for predictable durability.\u003c\/li\u003e\n  \u003cli\u003eDesigned to resist stretching and premature failure in typical mini bike use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation and adjustment parts are included?\u003c\/h3\u003e\n\u003cp\u003eYOXUFA supplies the essential installation hardware so you can install and tension the chains without searching for extra tools. The kit contains a chain breaker, two adjustable tensioner bolts, and four master links to fasten and fine-tune chain length and fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 42-link jackshaft chain and 1 x 90-link rear drive chain ready to mount.\u003c\/li\u003e\n  \u003cli\u003e4 master links for securing chain ends; easy to assemble and remove.\u003c\/li\u003e\n  \u003cli\u003eChain breaker for link removal and trimming to exact length on-site.\u003c\/li\u003e\n  \u003cli\u003eTwo 15mm tensioner adjusters to set proper slack and prevent derailing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this kit affect maintenance and ride reliability?\u003c\/h3\u003e\n\u003cp\u003eReplacing worn chains with a matched pair reduces noise, improves power transfer and helps avoid sudden failures that could strand you. Proper use of the supplied tensioners keeps slack within safe range to prevent rapid wear of sprockets and driveshaft components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCorrect chain length and solid master links reduce risk of derailment.\u003c\/li\u003e\n  \u003cli\u003eTensioners let you maintain recommended slack, extending component life.\u003c\/li\u003e\n  \u003cli\u003eIncluded breaker lets you trim to exact fit without extra trips to the shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YOXUFA 420 chain replacement kit is aimed at owners and mechanics of small off-road and recreational mini bikes who need a complete, ready-to-install drivetrain refresh. If you maintain Coleman CT200U series machines, BT200X, MB165\/MB200 variants, or mini bikes using Predator 196cc–212cc engines and want a durable matched pair of chains plus the tuning hardware to fit them properly, this kit provides the parts and tools to get the job done efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include everything needed for replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes 42-link and 90-link chains, 4 master links, a chain breaker and two tensioner adjusters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I shorten the 90-link chain to a custom length?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — use the supplied chain breaker to remove links and fit the correct length, then secure with a master link.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67591164526777,"sku":"B0BGPV4ZKY","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-packaging-and-chains.jpg?v=1790542904"},{"product_id":"yoxufa-420-chain-kit-for-predator-212-200cc-mini-bikes-gold-42-link-front-90-link-rear-forged-alloy","title":"YOXUFA 420 Chain Kit for Predator 212\/200cc Mini Bikes — Gold 42‑Link Front \u0026 90‑Link Rear, Forged Alloy","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA 420 chain kit supplies a durable gold 42-link jackshaft chain and 90-link rear drive chain built for Predator 212\/196cc and many 200cc-class mini bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete replacement chain set is made for small off-road and backyard mini bikes that use 420-size chains. The kit includes both front (jackshaft) and rear drive lengths plus hardware for installation and maintenance. Constructed from high-strength alloy steel with a wear-resistant gold finish, the chains are forged for toughness and long service life. The package aims to simplify swapping worn chains or upgrading stock drivetrain components on popular models from Coleman, Baja, Massimo and similar brands.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and mini bike models will this chain kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe YOXUFA 420 chain kit is engineered for many 200cc-class minibikes and common Predator small engines. It matches bikes that use a 420-size chain and fits a wide set of aftermarket and OEM platforms. Always confirm your bike’s chain size and sprocket tooth counts before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Predator 212cc and 196cc engines (6.5hp class)\u003c\/li\u003e\n  \u003cli\u003eFits Coleman CT200U, CT200U-EX, BT200X, Trail 200 mini bikes\u003c\/li\u003e\n  \u003cli\u003eCompatible with Baja\/Massimo\/Hensim MB165, MB200 families\u003c\/li\u003e\n  \u003cli\u003eWorks with many 200cc mini bike variants and similar powersports models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable are these chains and what materials are used?\u003c\/h3\u003e\n\u003cp\u003eYOXUFA supplies chains forged from high-strength alloy steel and finished with a protective gold plating for improved wear resistance. The forging process increases tensile strength and reduces breakage risk under typical mini bike loads. Regular lubrication and proper tensioning will help the chains reach their expected lifespan.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAlloy steel construction for high tensile strength and fatigue resistance\u003c\/li\u003e\n  \u003cli\u003eWear-resistant surface finish to reduce abrasion and corrosion\u003c\/li\u003e\n  \u003cli\u003eRepeated forging process for added toughness and durability\u003c\/li\u003e\n  \u003cli\u003eIncludes four master links for secure assembly and repair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat installation tools and parts are included in the kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives ready for a standard chain replacement: you get both chain lengths plus a breaker tool and tensioner hardware to complete the job. The included 420 chain breaker simplifies removing the old chain, and the tensioner adjusters help set correct chain slack. If you’re comfortable with basic wrenching and following torque specs, installation is straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne 420 rear drive chain — 90 links\u003c\/li\u003e\n  \u003cli\u003eOne 420 front jackshaft chain — 42 links\u003c\/li\u003e\n  \u003cli\u003e420 chain breaker tool for splitting and joining links\u003c\/li\u003e\n  \u003cli\u003eTwo chain tensioner adjusters and four 420 master links\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e This YOXUFA 420 chain kit is aimed at mini bike owners, backyard builders, and small powersports technicians who need a reliable replacement or upgrade for 200cc-class drivetrains. It’s ideal for riders of Coleman, Baja, Massimo, Hensim and similar mini bikes that specify 420 chains, and for anyone who prefers a complete kit with installation tools and hardware included. Check sprocket sizes and chain routing before fitting to ensure correct compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both front and rear chains?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes a 42-link jackshaft (front) chain and a 90-link rear drive chain along with hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the chain fit a Predator 212 engine on my mini bike?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s compatible with many Predator 212\/196cc setups, but verify your bike uses a 420 chain and matching sprocket sizes first.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67591167246521,"sku":"B0F9NS3HSM","price":79.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-packaging-420-chain-kit.jpg?v=1790542968"},{"product_id":"yoxufa-pz19-19mm-carburetor-for-50-125cc-pit-bikes-atvs-hand-choke-7-8in-throttle-kit","title":"YOXUFA PZ19 19mm Carburetor for 50–125cc Pit Bikes \u0026 ATVs — Hand Choke, 7\/8in Throttle Kit","description":"\u003cstrong\u003eYOXUFA PZ19 is a 19mm 4-stroke carburetor kit designed to replace or upgrade the fuel delivery system on 50cc–125cc pit bikes, quads and ATVs with a hand-choke and 7\/8\" throttle assembly.\u003c\/strong\u003e\n\n\u003cp\u003eIf you need a reliable, direct-fit replacement carburetor for a range of small Chinese-made motorcycles and ATVs—TaoTao, Apollo, Coolster, Baja, SSR, Xmotos and similar models—the YOXUFA PZ19 offers an off-the-shelf option with the common 19mm bore, a pre-installed hand choke, and a 7\/8\" throttle grip and cable assembly. The kit arrives with an air filter, fuel line, fuel filters, clamps and a gasket set so you can swap the unit with minimal additional parts.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my 110cc or 125cc pit bike?\u003c\/h3\u003e\n\u003cp\u003eCompatibility centers on bore size and throttle\/handlebar standards. The PZ19 has a 19 mm internal bore and is intended for many 50cc–125cc Chinese four-stroke models; it usually fits engines that accept PZ19 carb patterns and 7\/8\" throttle grips.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal diameter: 19 mm; outer airbox side diameter: 32 mm.\u003c\/li\u003e\n  \u003cli\u003eIncluded throttle grip sized for 7\/8\" (22 mm) handlebars.\u003c\/li\u003e\n  \u003cli\u003eThrottle cable length: 127 cm (50 in) for flexible routing.\u003c\/li\u003e\n  \u003cli\u003eDesigned for common mini pit bikes, quads and small ATVs from Chinese manufacturers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat does the kit include and how complete is it for installation?\u003c\/h3\u003e\n\u003cp\u003eThe YOXUFA kit is packaged as an install-ready carburetor assembly with most small parts you’ll need. It reduces the number of extra purchases, though some bikes may still require adapter boots or unique clamps depending on their intake manifold.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x PZ19 carburetor with hand choke.\u003c\/li\u003e\n  \u003cli\u003e1x red air filter, 1x fuel line, 2x inline fuel filters, 4x clamps, and a gasket set.\u003c\/li\u003e\n  \u003cli\u003e1x throttle housing, 1x black throttle cable (127 cm), and 1x throttle handle grip.\u003c\/li\u003e\n  \u003cli\u003eBasic clamps and gaskets for a typical direct-fit swap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the hand choke and throttle assembly affect performance and usability?\u003c\/h3\u003e\n\u003cp\u003eA hand choke simplifies cold starts for small engines by enriching the mixture without modifying jets. The included 7\/8\" throttle grip and 50\" cable fit most mini-bike handlebars and allow straightforward replacement of worn controls.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHand choke provides easy cold-start control without linking to a manual cable choke.\u003c\/li\u003e\n  \u003cli\u003e7\/8\" throttle grip matches common mini bike handlebars for quick swaps.\u003c\/li\u003e\n  \u003cli\u003e50\" cable offers generous routing options behind tanks and frames.\u003c\/li\u003e\n  \u003cli\u003eAir filter and inline filters help keep particulates out of the bowl and jets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? The YOXUFA PZ19 carburetor kit is aimed at owners and mechanics of small-displacement four-stroke pit bikes, mini dirt bikes, and quads—especially those riding Chinese-made models that accept PZ-style 19mm carbs. It’s a practical choice when the original carburetor is leaking, clogged, or worn, and for anyone wanting a one-package replacement that includes throttle hardware and basic consumables. If your machine’s intake flange, cable routing, or handlebar diameter differ significantly, check measurements first or be prepared to add a manifold adapter or different length cable. Professional installation is recommended if you’re unfamiliar with carburetor syncing, jetting, or fuel-system plumbing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the PZ19 come with a throttle cable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes a 127 cm (50\") black throttle cable and a 7\/8\" throttle grip for most mini-bike bars.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this carb on a 110cc four-stroke?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally yes if your engine accepts a 19mm PZ-style carburetor and 7\/8\" throttle hardware; check flange and intake dimensions before buying.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67591341867193,"sku":"B0BZVMJ5QH","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-pz19-front-view-carburetor.jpg?v=1790548119"},{"product_id":"yoxufa-mini-bike-rear-sprocket-60t-40mm-bore-420-chain-heavy-duty-torque-upgrade-for-196-200cc-coleman-baja-mb200","title":"YOXUFA Mini Bike Rear Sprocket 60T 40mm Bore 420 Chain — Heavy‑Duty Torque Upgrade for 196–200cc Coleman\/Baja\/MB200","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA 60-tooth 420 rear chain sprocket is a direct-fit heavy‑duty replacement designed to increase torque and improve climbing performance on 196–200cc Coleman and compatible minibikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mini bike’s rear sprocket is worn, bent or stripped, swapping in this YOXUFA 60T 420 sprocket gives a straightforward mechanical upgrade. Built to the same mounting pattern used by many Coleman\/Baja\/Massimo models, this replacement fits a 40 mm center bore and matches 420 chain width. The larger tooth count than typical stock parts alters gearing to favor torque, making slow-speed climbs easier without changing the front sprocket.\u003c\/p\u003e\n\n\u003ch3\u003eWill this sprocket fit my Coleman CT200U or BT200X?\u003c\/h3\u003e\n\n\u003cp\u003eMeasure the center bore and mounting holes on your original sprocket before buying. The YOXUFA part has a 40 mm (1.57\") center bore and 11 mm (0.43\") mounting holes, and it’s engineered for 420 chain systems used on many Coleman minibikes and compatible models.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCenter bore: 40 mm (1.57\").\u003c\/li\u003e\n  \u003cli\u003eMounting holes: 11 mm (0.43\").\u003c\/li\u003e\n  \u003cli\u003eOverall diameter: 245 mm (9.64\").\u003c\/li\u003e\n  \u003cli\u003eChain size compatibility: 420 chain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does a 60-tooth rear sprocket change performance?\u003c\/h3\u003e\n\n\u003cp\u003eSwitching from a smaller rear sprocket (for example, 50T) to this 60T increases mechanical advantage at the rear wheel. That translates to stronger low-end torque and improved ability to climb or accelerate from low speeds, though top speed can decrease if the front sprocket remains unchanged.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBetter low-speed acceleration and hill-climbing.\u003c\/li\u003e\n  \u003cli\u003eLess strain on the engine under load.\u003c\/li\u003e\n  \u003cli\u003ePotential slight reduction in top speed with same front sprocket.\u003c\/li\u003e\n  \u003cli\u003eGood choice for off-road or heavy-load situations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from this replacement?\u003c\/h3\u003e\n\n\u003cp\u003eThe YOXUFA sprocket is manufactured from heavy‑duty metal intended for long service life in powersports conditions. It’s made to resist normal wear from chain engagement and road grit when maintained correctly, though life expectancy depends on riding style and maintenance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed of robust metal for extended use.\u003c\/li\u003e\n  \u003cli\u003eDesigned for standard 420 chain wear characteristics.\u003c\/li\u003e\n  \u003cli\u003eRecommended to inspect and lubricate chain regularly to maximize life.\u003c\/li\u003e\n  \u003cli\u003eReplace when teeth become visibly worn, hooked, or uneven.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the YOXUFA 60T rear sprocket?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation follows the same steps as most minibike rear sprocket replacements: remove the rear wheel, unbolt the old sprocket, fit the new sprocket to the hub aligning the mounting holes, and torque fasteners to manufacturer specs. Confirm chain alignment and proper tension before riding.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTools: basic socket set, torque wrench, possibly a breaker bar.\u003c\/li\u003e\n  \u003cli\u003eRemove wheel, unfasten old sprocket bolts, clean mounting surface.\u003c\/li\u003e\n  \u003cli\u003eFit sprocket, tighten bolts evenly to specified torque, reinstall wheel.\u003c\/li\u003e\n  \u003cli\u003eSet chain tension and check alignment before test ride.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YOXUFA 60T 420 rear sprocket is aimed at owners of Coleman CT200U, BT200X, Baja Warrior, Massimo MB200 and similar 196–200cc minibikes who need a direct, rugged replacement or want more low-end torque for off-road use. It’s suited to riders who can measure their existing sprocket and perform a standard wheel\/sprocket swap or who have access to basic shop help.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What chain size does this sprocket use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This YOXUFA rear sprocket is made for 420 chain systems, commonly used on Coleman and similar minibikes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I keep my existing front sprocket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the 60T rear sprocket works with your current front sprocket, but expect increased torque and reduced top speed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67591344488633,"sku":"B09XK27NJC","price":73.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-view-sprocket.jpg?v=1790548161"},{"product_id":"yoxufa-mini-bike-throttle-drum-brake-kit-7-8-22mm-handlebar-chrome-lever-rubber-grip","title":"YOXUFA Mini Bike Throttle \u0026 Drum Brake Kit 7\/8\" (22mm) Handlebar — Chrome Lever \u0026 Rubber Grip","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's mini bike throttle and drum brake lever kit replaces worn controls on 22mm\/7\/8\" handlebars for Coleman, Baja and Massimo 196–200cc mini bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement kit includes a 7\/8\" (22mm) throttle assembly with rubber grip, a chrome-plated aluminum brake lever, a long drum brake cable, and 105 mm brake shoes — everything designed to restore reliable steering control and braking feel on older or well-used mini bikes. Components are made from corrosion-resistant metal, abrasion-resistant cable, and textured soft PVC grip sleeve so riders regain comfortable handling and consistent performance without modifying the bars.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit restore my mini bike’s throttle and brake performance?\u003c\/h3\u003e\n\u003cp\u003eThe kit replaces both the right-hand throttle grip and the left-hand drum brake lever so you get coordinated control after installing the cables and grips. The throttle cable is matched to a 22mm handlebar clamp and the brake cable is long enough for standard mini bike routing, reducing slack and improving response.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes a 127 cm (50\") throttle cable to reach common carburetor locations.\u003c\/li\u003e\n  \u003cli\u003eBrake cable measures 172 cm (67.72\") for flexible routing on small frames.\u003c\/li\u003e\n  \u003cli\u003e105 mm brake shoes sized for typical mini bike drum assemblies.\u003c\/li\u003e\n  \u003cli\u003eTextured PVC grip improves hand traction and comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these parts fit my Coleman, Baja or Massimo mini bike?\u003c\/h3\u003e\n\u003cp\u003eThe components are built to fit 22 mm (7\/8\") handlebars used on many mini bike models. Compatibility covers several popular models, but confirm your handlebar diameter and drum brake shoe length before ordering to ensure a perfect match.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Coleman CT200U, CT200U-EX, BT200X and similar 196–200cc units.\u003c\/li\u003e\n  \u003cli\u003eBaja Motorsports MB165, MB200 variants including Warrior and Mini Baja.\u003c\/li\u003e\n  \u003cli\u003eMassimo MB200 mini bike compatibility for 6.5 hp engines.\u003c\/li\u003e\n  \u003cli\u003eCheck handlebar clamp diameter is 22 mm (0.87\") prior to purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from the brake lever and throttle grip?\u003c\/h3\u003e\n\u003cp\u003eThe brake lever is fabricated from aluminum alloy with a chrome-plated finish for corrosion resistance and a smooth feel underhand. The throttle grip uses a soft, textured PVC sleeve for comfort while the cables are steel wire braided for abrasion resistance and long-term use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChromed aluminum brake lever resists rust and bending under normal use.\u003c\/li\u003e\n  \u003cli\u003eSoft rubber\/PVC throttle sleeve reduces hand fatigue and improves grip.\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant wire rope for throttle and brake cables increases lifespan.\u003c\/li\u003e\n  \u003cli\u003ePrecision-cut brake shoes sized at 105 mm for reliable drum contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This kit suits owners restoring or maintaining small-displacement mini bikes who need a complete right-hand throttle and left-hand drum brake replacement. It's ideal for DIY mechanics working on Coleman BT200X \/ CT200U series, Baja MB165\/MB200 variants, or Massimo MB200 models that use standard 22 mm handlebars, and for riders who want corrosion-resistant controls and improved cable routing without custom fabrication.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit 7\/8\" handlebars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The throttle and brake lever are made for 22 mm (7\/8\") handlebars common on many mini bikes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the cables long enough for Coleman CT200U?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The throttle cable is 127 cm and the brake cable is 172 cm, suitable for standard CT200U routing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67591437189305,"sku":"B0CR73T5XY","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-packaging-throttle-brake-kit.jpg?v=1790551130"},{"product_id":"yoxufa-mini-bike-clutch-cover-replacement-for-coleman-ct200u-200cc-engines-black-durable-plastic-protects-clutch-and-chain","title":"YOXUFA Mini Bike Clutch Cover Replacement for Coleman CT200U \u0026 200cc Engines — Black Durable Plastic Protects Clutch and Chain","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's Plastic Mini Bike Clutch Cover is a direct-fit replacement cover that protects the clutch and chain area on Coleman CT200U, Predator 212cc\/196cc\/200cc, MB165\/Baja Warrior, and similar mini bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement clutch cover from YOXUFA is molded to shield the clutch assembly and chain area from water, dirt, and road debris that can accelerate wear. Constructed from durable plastic, it provides a simple, affordable way to restore protection after damage or to replace a missing or cracked factory cover. The part is supplied ready for installation and is compatible with a range of popular 6.5hp and 200cc mini bike models.\u003c\/p\u003e\n\n\u003ch3\u003eWill this clutch cover fit my Coleman CT200U or CT200U-EX?\u003c\/h3\u003e\n\u003cp\u003eYes — the YOXUFA clutch cover is designed to match the mounting pattern and clearances used on Coleman CT200U variants including CT200U-EX and CT200U-A. It lines up with the same bolt points and provides appropriate coverage for the clutch and chain area.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect compatibility with Coleman CT200U series models\u003c\/li\u003e\n  \u003cli\u003eMatches OEM mounting hole positions for simple swap-in\u003c\/li\u003e\n  \u003cli\u003eMade to avoid interference with the sprocket and chain path\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this cover work with Predator and other 200cc engines?\u003c\/h3\u003e\n\u003cp\u003eIt fits many common 196cc–212cc single-cylinder engines such as Predator 212, 200cc, and 196cc units used in mini bikes. The geometry of the cover accommodates engines like the Predator 212cc and compatible clones, making it a versatile replacement across brands.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Predator 212cc and similar 200cc engines\u003c\/li\u003e\n  \u003cli\u003eSuitable for mini bikes using 6.5hp engine configurations\u003c\/li\u003e\n  \u003cli\u003eFrequently used on Baja MB165, Hensim MB165 and Falcon 200 models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the YOXUFA cover protect the clutch and chain?\u003c\/h3\u003e\n\u003cp\u003eThe cover forms a barrier that reduces direct exposure of the clutch and chain to rain, mud, rocks, and road grit that cause corrosion and accelerated wear. By keeping contaminants out, the cover helps maintain cleaner moving parts and prevents premature component failure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlocks water and debris from reaching the clutch housing\u003c\/li\u003e\n  \u003cli\u003eReduces buildup on the chain and sprocket surfaces\u003c\/li\u003e\n  \u003cli\u003eHelps extend the life of clutch components and chain drive parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what’s included in the package?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone with basic mechanical skills: remove the old cover, align the YOXUFA cover to the bolt pattern, and secure it using the supplied fasteners or your original bolts. The package is minimal but includes the replacement cover so you can complete the job quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 1 mini bike clutch cover ready for installation\u003c\/li\u003e\n  \u003cli\u003eSimple bolt-on replacement — no special machining required\u003c\/li\u003e\n  \u003cli\u003eBuilt of impact-resistant plastic for long-term use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders and mechanics who need an affordable, durable replacement clutch cover for small-displacement mini bikes — especially owners of Coleman CT200U-series, Predator 212\/196\/200 engines, Baja\/Hensim MB165 models, Falcon 200, and similar 6.5hp platforms. It’s a practical choice for restoring factory protection after damage, upgrading a missing or cracked part, or keeping a bike ready for trail and yard use without heavy mechanical modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this replace a cracked factory clutch cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The YOXUFA cover is a direct-fit replacement designed to match factory mounting and restore protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is hardware included for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes the clutch cover; commonly the original bolts are reused, but some sellers include basic fasteners.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67591466287289,"sku":"B09VDB5XL2","price":75.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-clutch-cover-front-view.jpg?v=1790552178"},{"product_id":"yoxufa-pz22-22mm-carburetor-for-50-125cc-pit-bikes-atvs-kit-with-air-filter-and-hardware","title":"YOXUFA PZ22 22mm Carburetor for 50–125cc Pit Bikes \u0026 ATVs — Kit with Air Filter and Hardware","description":"\u003cstrong\u003eYOXUFA PZ22 is a 22mm replacement carburetor kit engineered to fit many 50–125cc pit bikes, ATVs and dirt bikes, supplying a complete plug-and-play intake solution with choke, air filter and installation hardware.\u003c\/strong\u003e\n\n\u003cp\u003eIf your small-displacement ride is running rough, flooding, or refusing to idle, swapping in a properly sized carburetor can restore reliable starting and smoother throttle response. The YOXUFA PZ22 kit is built to match common Chinese-made 4-stroke models and comes with hoses, clamps, fuel filters and a red mini air filter so you won’t have to source add-ons separately. Dimensions and bolt spacing are provided so you can verify fitment before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhich bikes and ATVs is this carburetor compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis PZ22 is designed for many 50–125cc small-displacement machines from popular budget brands and clones. It fits pit bikes, quads and some trail bikes with a 22mm intake requirement and standard mounting bolt spacing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon models: SSR 110\/125, TaoTao DB14\/DB24, CRF50F-style, XR50-style\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with: Coolster, Apollo, Coleman AT125, Pitster Pro 70cc\u003c\/li\u003e\n  \u003cli\u003eVerify: 22mm throat diameter and ~48mm bolt center-to-center\u003c\/li\u003e\n  \u003cli\u003eLeft-side hand choke orientation—confirm before install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does install and fitment work for a PZ22 on my bike?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable removing the old carb and replacing intake hoses. The kit includes the gaskets, clamps, fuel line and inline filters to simplify assembly and reduce trips to the parts store.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure intake bore: inside diameter 22mm\u003c\/li\u003e\n  \u003cli\u003eMounting hole spacing: approximately 48mm side-to-side\u003c\/li\u003e\n  \u003cli\u003eIncludes hand choke on the left side—check cable routing\u003c\/li\u003e\n  \u003cli\u003eComes with spark plug and small air filter for immediate testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components are included in the kit, and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThe kit bundles the core carburetor plus all common consumables to get your engine running quickly after swap. That saves time sourcing matching clamps or fuel filters and reduces sealing problems from missing gaskets.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x PZ22 carburetor with hand choke\u003c\/li\u003e\n  \u003cli\u003e1 x red mini air filter, 1 x red fuel line, 2 x fuel filters\u003c\/li\u003e\n  \u003cli\u003e4 x hose clamps, full gasket set, and 1 spark plug\u003c\/li\u003e\n  \u003cli\u003ePre-assembled jets, ready for final tuning to your altitude\/fuel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill I need to tune or adjust anything after installation?\u003c\/h3\u003e\n\u003cp\u003eBasic tuning—air\/fuel mixture and idle screw adjustments—are normal after any carb swap to match local altitude, fuel quality, and the specific engine condition. The PZ22 arrives with standard jets but may require fine-tuning for best throttle response and idle stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdjust idle screw for stable low-RPM running\u003c\/li\u003e\n  \u003cli\u003eTest and adjust air\/fuel mixture for smooth acceleration\u003c\/li\u003e\n  \u003cli\u003eConsider rejetting for high-altitude or modified engines\u003c\/li\u003e\n  \u003cli\u003eConfirm choke operates correctly and cable routing is clear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This carburetor kit is aimed at riders, mechanics, and DIYers who maintain small 4-stroke pit bikes, quads or trail bikes from SSR, TaoTao, Coolster, Apollo and similar vendors. Choose this PZ22 if you need a complete replacement assembly—including choke, air filter and installation hardware—sized at a 22mm throat with roughly 48mm bolt spacing. If you’re unsure about fitment, measure your intake bore and bolt center distance, and confirm you want a left-side hand choke before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this carburetor fit my SSR 125?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the PZ22 fits many SSR 125\/110 models if your intake throat is 22mm and bolt spacing is about 48mm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the choke left- or right-sided?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit uses a left-side hand choke; confirm cable routing on your bike before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67591566983353,"sku":"B0BZVMTGBT","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-pz22-front-view.jpg?v=1790555424"},{"product_id":"yoxufa-gas-fuel-tank-replacement-for-predator-212-224-gx160-gx200-0-81-gal-side-cap-hardware-included","title":"YOXUFA Gas Fuel Tank Replacement for Predator 212\/224 GX160\/GX200 — 0.81 Gal Side Cap, Hardware Included","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA 0.81-gallon gas tank is a direct-fit replacement fuel tank designed to replace worn or inconvenient OEM tanks on Predator 212\/224\/200, GX160\/GX200 and many mini-bike and go-kart engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement tank restores reliable fuel storage and easier refueling for small-engine vehicles. Built from durable materials and supplied with installation hardware, the tank swaps into a wide range of mini bikes, go-karts and small engines to reduce downtime and eliminate hard-to-reach caps centered on older tanks.\u003c\/p\u003e\n\n\u003ch3\u003eWill this tank fit my Predator 212, 224, or GX160\/GX200 engine?\u003c\/h3\u003e\n\u003cp\u003eYes — the tank is engineered to be compatible with a variety of small OHV and clone engines, including common Predator and Honda-style models used on mini bikes and go-karts. Fitment covers many CT200U, BT200X, KT196 and MB200 variants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Predator 212\/224\/196\/200 series and clone OHV engines\u003c\/li\u003e\n  \u003cli\u003eWorks with GX160 and GX200 replacement engines\u003c\/li\u003e\n  \u003cli\u003eCompatible with Coleman, Baja Warrior, Massimo, TrailMaster and Hammerhead models listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the side fuel cap improve refueling?\u003c\/h3\u003e\n\u003cp\u003eThis tank moves the fuel cap to the side to make filling easier when installed in tight frames or when the original cap sits under handlebars. Side access reduces spills and makes quick top-ups more convenient on the trail or in the garage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSide-mounted cap for easier reach and reduced spillage\u003c\/li\u003e\n  \u003cli\u003eSimplifies refueling on installed bikes and karts with limited top access\u003c\/li\u003e\n  \u003cli\u003eIncludes a replacement gas cap to ensure a sealed connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how easy is installation?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with all basic hardware needed for a straightforward swap: tank assembly, cap and necessary fittings. Basic hand tools and moderate mechanical familiarity are sufficient to install the tank on compatible frames.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes tank, gas cap, spark plug, screw, fuel line, 2 clips, 2 nuts and a wrench\u003c\/li\u003e\n  \u003cli\u003ePre-drilled mounting points to match typical mini-bike frames\u003c\/li\u003e\n  \u003cli\u003eInstallation generally requires only hand tools and common mechanical skills\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this tank durable and suitable for regular use?\u003c\/h3\u003e\n\u003cp\u003eThe tank is manufactured under controlled standards using quality materials to provide dependable service in everyday riding conditions. Its construction aims to resist cracking and fuel wear typical of outdoor power equipment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade from premium materials for extended life\u003c\/li\u003e\n  \u003cli\u003eBuilt under standard quality controls for reliable performance\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand vibrational and environmental stresses common to mini bikes and karts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YOXUFA 0.81-gallon gas tank is ideal for DIY mechanics, mini-bike and go-kart owners, and powersports repair shops needing a reliable, easy-to-refuel replacement for Predator, GX-series and clone engines. Choose this kit if you want improved fuel access, a complete hardware package, and a long-lasting tank that fits a wide range of small-engine vehicles.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this tank work with Predator 212 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s designed as a direct-fit replacement for Predator 212 models and compatible Predator-series and clone OHV engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What hardware is included for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes gas cap, spark plug, screw, fuel line, two clips, two nuts, and a wrench for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67591619707065,"sku":"B09NCY1FQ9","price":79.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-view-gas-tank.jpg?v=1790556346"},{"product_id":"yoxufa-pz19-19mm-carburetor-replacement-kit-with-cable-choke-and-red-air-filter-for-49-125cc-atvs-dirt-bikes-go-karts","title":"YOXUFA PZ19 19mm Carburetor Replacement Kit with Cable Choke and Red Air Filter for 49–125cc ATVs, Dirt Bikes \u0026 Go-Karts","description":"\u003cstrong\u003eYOXUFA PZ19 is a replacement 19mm carburetor with cable choke and red air filter kit designed to fit many 49–125cc Chinese ATVs, dirt bikes, go-karts and mini choppers.\u003c\/strong\u003e\n\n\u003cp\u003eThis complete carburetor assembly arrives ready to install with a cable-operated choke, red air filter and fuel lines plus clamps and small parts. Engineered to match the common PZ19 bore and mounting geometry used across a wide range of TaoTao, Baja, SSR, Kayo, Loncin and similar machines, it provides a straightforward path to restore proper fueling on models that accept a 19mm carb. Before buying, confirm bore size and manifold fitment because this unit is not intended for GY6 engines.\u003c\/p\u003e\n\n\u003ch3\u003eWhich machines will this carburetor fit?\u003c\/h3\u003e\n\u003cp\u003eThis PZ19 is made for small-displacement Chinese and copy-style engines commonly found on kids’ ATVs, pit bikes and moped-style scooters. Fitment includes 49–125cc units from brands such as TaoTao, Baja, SSR, Kayo, Loncin, Sunl, Kazuma and many others that use the PZ19 pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible ranges: 49cc, 50cc, 70cc, 90cc, 110cc, 125cc\u003c\/li\u003e\n  \u003cli\u003eNotable compatible models: Baja DR70\/DR90, SSR Lazer 5\/6, Kayo Fox 70, Kazuma Falcon 110\u003c\/li\u003e\n  \u003cli\u003eCheck manifold bore and mounting studs—this is not for GY6 engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key dimensions and included parts?\u003c\/h3\u003e\n\u003cp\u003eThe kit centers on a 19mm carb bore with clear external measurements for air filter and intake fitment. It ships as a plug-and-play bundle with replacement consumables so you don’t need to buy extra hoses or clamps for a basic swap.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarburetor bore (inside): 19 mm\u003c\/li\u003e\n  \u003cli\u003eOuter carb\/airbox side diameter: 32 mm; air filter diameter: 35 mm\u003c\/li\u003e\n  \u003cli\u003eIncluded: 1 carb (cable choke), 1 red air filter, fuel line, 2 fuel filters, 4 clamps, gasket set, spark plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the cable choke and kit parts help installation?\u003c\/h3\u003e\n\u003cp\u003eThe cable-operated choke allows simple cold-start control without modifying the throttle linkage. The extra fuel filters, clamps and gaskets reduce the need for immediate additional parts, making installation quicker and minimizing trips to the parts store.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCable choke: easier routing and lever control from the handlebars\u003c\/li\u003e\n  \u003cli\u003eSpare fuel filters and clamp set to secure lines and prevent leaks\u003c\/li\u003e\n  \u003cli\u003eGaskets and included spark plug help complete a basic tune-up during install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: If you own a small Chinese-made ATV, pit bike, go-kart or mini scooter that uses a 19mm PZ pattern carburetor and you need a complete, affordable replacement kit—including choke, filter and hardware—this YOXUFA PZ19 kit is built for that role. It’s aimed at DIY mechanics and hobbyists who want a dependable parts swap without sourcing many separate components. Always verify your bike or ATV’s carburetor bore and manifold fit before ordering to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this carburetor compatible with GY6 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The YOXUFA PZ19 is not designed for GY6 engines; confirm your engine uses a PZ19-style carburetor.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include an air filter and fuel lines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes a red air filter, fuel line, two fuel filters, clamps, gaskets and a spark plug.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67592598192313,"sku":"B0BZVLKZH6","price":58.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-pz19-front-assembly.jpg?v=1790566133"},{"product_id":"yoxufa-420-motorcycle-chain-132-link-59-kit-with-chain-breaker-10-connectors-1-2-pitch-1-4-roller","title":"YOXUFA 420 Motorcycle Chain 132-Link (59\") Kit with Chain Breaker \u0026 10 Connectors — 1\/2\" Pitch, 1\/4\" Roller","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA 420 Motorcycle Chain is a 132-link, 59-inch replacement chain kit designed for small-displacement pit bikes, mini ATVs, and go-karts, supplied with a chain breaker and connector links for on-bike installation.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty 420 chain kit provides a ready-to-install drivetrain solution for a wide range of 50cc–212cc four-stroke Chinese and Japanese mini bikes and quads. Built to match standard 420 pitch and roller dimensions, the set includes the full-length chain, a chain breaker tool and ten connector links so you can size the chain to your sprockets without searching for extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eWill this chain fit my pit bike, mini ATV or go-kart?\u003c\/h3\u003e\n\u003cp\u003eCompatibility is broad but depends on the original chain spec of your vehicle. The YOXUFA 420 chain uses a 1\/2\" pitch and 1\/4\" roller width, typical for many small-displacement models, so confirm your OEM chain number or measure before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 50cc–212cc small four-stroke bikes and quads commonly using 420 chains\u003c\/li\u003e\n  \u003cli\u003eCompatible examples: SSR, TaoTao, Coolster, Apollo, Baja, Roketa, Kazuma models\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for CRF50\/70\/80 and XR50\/70\/80 style minis that use 420 chains\u003c\/li\u003e\n  \u003cli\u003eCheck sprocket thickness and pitch match: 0.227\" sprocket thickness recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I size and install the 132-link chain?\u003c\/h3\u003e\n\u003cp\u003eThe chain arrives full-length with 132 links (66 internal + 66 external) so you can trim to your required length. Use the included chain breaker to remove unwanted links and the connector links to rejoin the chain; always ensure proper tension and lubrication after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTotal length: 59 inches with 132 links for flexible sizing\u003c\/li\u003e\n  \u003cli\u003eIncludes 1 chain breaker tool to push out pins safely on-site\u003c\/li\u003e\n  \u003cli\u003eTen 420 connector links supplied for secure reassembly\u003c\/li\u003e\n  \u003cli\u003eAfter fitting, set correct slack per your vehicle manual and lubricate rollers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical specifications and durability features?\u003c\/h3\u003e\n\u003cp\u003eThe YOXUFA chain follows standard 420 dimensions so sprockets and tensioners designed for 420 chains will interface correctly. The roller diameter, pitch and width align with common mini bike designs to keep engagement smooth and reduce premature wear when maintained properly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChain number: 420; pitch: 1\/2\"; roller width: 1\/4\"; roller diameter: 5\/16\"\u003c\/li\u003e\n  \u003cli\u003eSprocket thickness spec: approximately 0.227\" to match chain plates\u003c\/li\u003e\n  \u003cli\u003eBreaker tool rated for 420–530 chain pin removal for versatility\u003c\/li\u003e\n  \u003cli\u003eSupplied connectors allow a reliable mechanical join without special crimps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This YOXUFA 420 chain kit is aimed at riders, mechanics and hobbyists who need a full-length replacement chain for small-displacement motorcycles, ATVs, mini bikes, go-karts and quads. It’s especially useful if you want a complete kit—chain, breaker tool and connector links—in one purchase so you can size and fit the chain at home or trackside without scavenging parts.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the 420 chain fit a TaoTao 110cc?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If your TaoTao 110cc uses a 420-spec chain (1\/2\" pitch), this 132-link YOXUFA chain will fit after trimming to length.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools are included to size the chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes a chain breaker tool and ten 420 connector links to cut and rejoin the chain on site.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67592719892665,"sku":"B09NKGX97Y","price":67.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-packaging.jpg?v=1790567069"},{"product_id":"yoxufa-pz19-19mm-carburetor-kit-with-cable-choke-red-air-filter-gasket-fuel-line-for-50-125cc-atvs-pit-bikes-go-karts","title":"YOXUFA PZ19 19mm Carburetor Kit with Cable Choke — Red Air Filter, Gasket \u0026 Fuel Line for 50–125cc ATVs Pit Bikes Go-Karts","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA PZ19 is a 19mm cable-choke carburetor kit with a red air filter and full gasket\/fuel line set engineered to replace worn carburetors on 49–125cc mini ATVs, pit bikes, go-karts and mopeds.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete replacement carburetor package includes the PZ19 body with cable choke, a red conical air filter, fuel line, inline filters, clamps, gasket set and a spark plug—supplied to restore throttle response and fuel delivery on many Chinese-engine small vehicles. It’s sized to work with a wide range of 50–125cc machines from brands such as TaoTao, SSR, Kayo, Baja, Roketa, Loncin and others (not compatible with GY6 engines). Check fitment dimensions and model list before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWill this carburetor fit my 50–125cc ATV or pit bike?\u003c\/h3\u003e\n\u003cp\u003eThe PZ19 is designed for many 49–125cc Chinese small-displacement vehicles and commonly replaces worn stock carbs on TaoTao, Baja, SSR, Kayo, Loncin and several more. Compatibility depends on intake and airbox mount diameters rather than brand alone, so confirming measurements is essential.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarburetor bore: 19mm (internal)\u003c\/li\u003e\n  \u003cli\u003eOuter carb diameter (air filter side): 32mm\u003c\/li\u003e\n  \u003cli\u003eAir filter diameter: 35mm — verify your intake manifold and airbox spacing\u003c\/li\u003e\n  \u003cli\u003eCommon compatible models listed in product features—review before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this kit improve starting and throttle response?\u003c\/h3\u003e\n\u003cp\u003eReplacing a clogged or damaged carburetor with a fresh PZ19 unit often restores smoother idling, easier cold starts and crisper throttle progression. The included cable-operated choke simplifies cold starts, while the new fuel line and filters ensure clean fuel reaches the float bowl.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCable choke for manual cold-start control\u003c\/li\u003e\n  \u003cli\u003eNew fuel line and two inline fuel filters to prevent debris\u003c\/li\u003e\n  \u003cli\u003eComplete gasket set reduces air\/fuel leaks for reliable idling\u003c\/li\u003e\n  \u003cli\u003eRed conical air filter improves airflow and is easy to inspect\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what do I need to install it?\u003c\/h3\u003e\n\u003cp\u003eThe kit ships with the carburetor plus all common consumables needed for a standard swap, so most installations require only basic hand tools. You may need a few extra clamps or an adapter if your intake manifold measurements differ slightly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x PZ19 cable-choke carburetor\u003c\/li\u003e\n  \u003cli\u003e1 x red air filter, 1 x red fuel line, 2 x inline fuel filters\u003c\/li\u003e\n  \u003cli\u003e4 x clamps, 1 x gasket set, 1 x spark plug included\u003c\/li\u003e\n  \u003cli\u003eTypical install: screwdrivers, pliers, socket set; possible intake adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I verify compatibility before buying?\u003c\/h3\u003e\n\u003cp\u003eMeasure your current carburetor’s intake and air filter mounting diameters and compare them to the PZ19 specs. Also cross-check your model against the provided fitment list—this prevents ordering a carb that won’t seal or connect properly with your throttle cable and airbox.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure internal bore (should be ~19mm) and outer filter-side diameter (32mm)\u003c\/li\u003e\n  \u003cli\u003eConfirm air filter clearance fits the 35mm filter diameter\u003c\/li\u003e\n  \u003cli\u003eCompare your machine against the fitment brand\/model list in the features\u003c\/li\u003e\n  \u003cli\u003eNot compatible with GY6-style engines—verify engine family\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YOXUFA PZ19 kit suits DIY mechanics, hobby riders and repair shops working on small-displacement dirt bikes, ATVs, go-karts and mopeds built around common Chinese engines. It’s ideal if your machine shows poor idling, hard starting, or fuel-delivery issues and your current carburetor matches the PZ19 measurements. If you’re unsure about fitment, measure your existing carburetor dimensions and consult the listed compatible models before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the PZ19 carburetor compatible with GY6 engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This PZ19 kit is not compatible with GY6-style engines—measure your carb dimensions before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include an air filter and fuel lines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes a red air filter, fuel line, two inline fuel filters, clamps, gaskets and a spark plug.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67592914174137,"sku":"B0CCNSFGXZ","price":57.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-pz19-front-view_a1bd67f3-62c9-4c1b-890e-3712ae462266.jpg?v=1790569521"},{"product_id":"yoxufa-mini-bike-brake-lever-kit-67-drum-brake-cable-7-8-22mm-chrome-lever-105mm-shoes-for-196-212cc-minibikes","title":"YOXUFA Mini Bike Brake Lever Kit — 67\" Drum Brake Cable, 7\/8\" (22mm) Chrome Lever \u0026 105mm Shoes for 196–212cc Minibikes","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA Mini Bike Brake Lever Kit is a complete 7\/8\" (22mm) handlebar brake replacement set featuring a 67-inch drum brake cable, 105mm brake shoes, and a chrome-plated aluminum lever for reliable stopping on popular 196cc–212cc minibikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your mini bike or go-kart needs a dependable, ready-to-install brake upgrade, this kit bundles the common parts technicians replace together: lever, cable, shoes, and basic hardware. Designed to match many Coleman, Baja, Massimo, Hensim, and Tomberlin mini bikes, the set aims to simplify repairs and restore mechanical drum-brake performance without sourcing multiple components.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit my mini bike handlebar and brake system?\u003c\/h3\u003e\n\u003cp\u003eThe lever is sized for a 7\/8\" (22mm) handlebar clamp, a common diameter on small off-road minibikes. The 67-inch (about 170 cm) cable length and 105mm brake shoes match standard drum setups used on the listed models, but always verify measurements on your bike before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHandlebar clamp: 7\/8\" \/ 22mm\u003c\/li\u003e\n  \u003cli\u003eCable length: 67 inches (approx. 170 cm)\u003c\/li\u003e\n  \u003cli\u003eShoe diameter: 105mm drum-style brake shoes\u003c\/li\u003e\n  \u003cli\u003eCheck: compare cable routing and drum size on your bike\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat models are compatible with this brake kit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is manufactured to fit multiple popular minibike and go-kart lines. It supports many Coleman CT200U variants, several Baja Motorsports MB165\/MB200 models, and other brands that use similar drum-brake dimensions. Review the compatibility list and your bike’s brake geometry to confirm fitment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eColeman: CT200U, CT200U-EX, CT200U-EXR, BT200X\u003c\/li\u003e\n  \u003cli\u003eBaja Motorsports: MB165, MB200 (Warrior, Mini Baja, Heat)\u003c\/li\u003e\n  \u003cli\u003eHensim \u0026amp; Massimo MB200 series, Tomberlin Firehawk 6.0Hp\u003c\/li\u003e\n  \u003cli\u003eAlso fits other minibikes using 105mm drum shoes and 67\" cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware are included?\u003c\/h3\u003e\n\u003cp\u003eThe lever is made from chrome-plated aluminum alloy for corrosion resistance and reduced weight, while the cable and shoes are supplied to restore standard drum-brake function. The package comes with basic installation accessories so you can perform the replacement without ordering extra parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChrome-plated aluminum alloy brake lever for durability\u003c\/li\u003e\n  \u003cli\u003e67-inch drum brake cable pre-measured for common routing\u003c\/li\u003e\n  \u003cli\u003e105mm brake shoes sized for standard minibike drums\u003c\/li\u003e\n  \u003cli\u003eIncluded accessories: 3 cable ties and a small wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I check before fitting?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic minibike maintenance. The kit includes a wrench and cable ties, but you should inspect leverage clearance, cable route, and drum fit before starting. Allow for a 1–2mm measurement tolerance when comparing parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect drum diameter and shoe fit before installation\u003c\/li\u003e\n  \u003cli\u003eConfirm cable length and routing for smooth operation\u003c\/li\u003e\n  \u003cli\u003eUse provided ties and wrench; additional hand tools may be needed\u003c\/li\u003e\n  \u003cli\u003eCheck lever clearance and brake engagement after fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YOXUFA Mini Bike Brake Lever Kit is aimed at minibike owners, home mechanics, and small repair shops that work on Coleman CT200U series, Baja\/Massimo\/Hensim MB165–MB200 models, and similar minibikes. It’s also useful for riders who want a single, economical kit that replaces the lever, cable, and shoes together for a faster repair. Note: always confirm measurements and compatibility with your specific bike model before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the lever fit a 7\/8\" handlebar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The YOXUFA lever is designed for 7\/8\" (22mm) handlebars common on minibikes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What components come in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes a lever, 67\" brake cable, 105mm brake shoes, 3 cable ties, and a wrench.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67592932098233,"sku":"B0B7G8T7W5","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-packaging-lever-and-cable.jpg?v=1790569809"},{"product_id":"yoxufa-mini-bike-drum-brake-kit-7-8-lever-105mm-shoes-67-cable-for-coleman-ct200u-aluminum-chrome-finish","title":"YOXUFA Mini Bike Drum Brake Kit — 7\/8\" Lever, 105mm Shoes \u0026 67\" Cable for Coleman CT200U, Aluminum Chrome Finish","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA Mini Bike Brake Lever Drum Brake Kit is a complete replacement set — including a 7\/8\" lever, 67\" drum brake cable and 105mm brake shoes — engineered to restore stopping power on Coleman CT200U series and compatible mini bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit gathers the core components needed to replace a worn or damaged drum brake system on a variety of 196–200cc mini bikes. Built from aluminum alloy with chrome plating for corrosion resistance, the package includes installation tools and cable ties so you can swap parts with minimal fuss. The assembly is sized to fit standard 7\/8\" (22 mm) handlebars and common 105mm brake drums used by many entry-level off-road mini bikes.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit fit my Coleman CT200U or similar mini bike?\u003c\/h3\u003e\n\u003cp\u003eThe YOXUFA kit is designed around common OEM dimensions: a 7\/8\" (22 mm) lever mount, a 105 mm brake shoe length and a 67\" (172 cm) cable. If your bike uses those measurements it will mount directly or with minor routing adjustments. Check your existing parts against the listed sizes before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLever clamp diameter: 7\/8\" (22 mm)\u003c\/li\u003e\n  \u003cli\u003eBrake shoe length: 105 mm (4.13\")\u003c\/li\u003e\n  \u003cli\u003eCable overall length: 172 cm (67.72\")\u003c\/li\u003e\n  \u003cli\u003eIncludes wrench and cable ties for easier fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction should I expect?\u003c\/h3\u003e\n\u003cp\u003eKey components are made from aluminum alloy with chrome plating to resist rust and deliver longer service life compared with plain steel. The brake shoes are matched to standard drum dimensions and the cable uses durable outer housing with a flexible inner wire for reliable actuation. The kit arrives ready to install with small hardware included.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy lever with chrome finish for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003ePre-sized brake shoes compatible with 105mm drums\u003c\/li\u003e\n  \u003cli\u003e67\" drum brake cable with robust inner wire and housing\u003c\/li\u003e\n  \u003cli\u003eSupplied wrench and three cable ties for secure routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the replacement brake components?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard drum brake replacement steps: remove the old lever, cable and shoes, then install the shoes into the brake drum, secure the cable and mount the lever to the handlebar. The included wrench and ties let you complete the job with basic tools. If you’re not comfortable working on brakes, a local mechanic can finish the install quickly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove wheel\/drum access plate to reach shoes\u003c\/li\u003e\n  \u003cli\u003eReplace shoes, reconnect and adjust the cable tension\u003c\/li\u003e\n  \u003cli\u003eMount lever on 7\/8\" clamp and route cable with supplied ties\u003c\/li\u003e\n  \u003cli\u003eAdjust free play and test before riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich models and use-cases is the kit compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis assembly targets small-displacement mini bikes with similar drum brake dimensions: Coleman CT200U series, CT200U-EX, BT200X, and many Baja, Massimo, Hensim and Predator mini bikes. It’s intended for routine replacement of worn components on recreational off-road machines and utility mini bikes rather than heavy-duty racing conversions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: Coleman CT200U, CT200U-EX, BT200X\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Baja MB165\/MB200, Massimo MB200, Hensim MB165\/MB200\u003c\/li\u003e\n  \u003cli\u003eFits many 196–200cc mini bike drum brake systems\u003c\/li\u003e\n  \u003cli\u003eIdeal for standard maintenance and component refresh\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders and home mechanics who own a Coleman CT200U-series or similarly configured mini bike and need a straightforward, cost-efficient drum brake refresh will benefit most. The YOXUFA kit is also suited for small repair shops and hobbyists who prefer a single package that includes lever, cable, shoes and the small tools needed for installation. If your bike matches the listed sizes and you want to replace multiple wear items at once, this kit provides the commonly required parts in one shipment.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this lever fit my 7\/8\" handlebar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The lever clamp is 7\/8\" (22 mm) and fits standard 7\/8\" handlebars used on many mini bikes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are the brake shoes compatible with 105mm drums?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The included shoes measure 105 mm and are designed for 105mm drum brake systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67592932294841,"sku":"B09PTR96YQ","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-packaging-lever-cable-shoes.jpg?v=1790569810"},{"product_id":"yoxufa-motorized-bicycle-ignition-coil-magneto-kit-49-100cc-2-stroke-cdi-with-light-aluminum-magneto","title":"YOXUFA Motorized Bicycle Ignition Coil \u0026 Magneto Kit — 49–100cc 2‑Stroke, CDI with Light \u0026 Aluminum Magneto","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's motorized bicycle kit is a complete ignition and magneto replacement set designed to restore spark and fuel line reliability on 49–100cc 2‑stroke engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit bundles a CDI ignition coil, an aluminum‑sheathed magneto coil, a spark plug, fuel line and filters, plus mounting clips — all intended to make diagnosis and repair faster for motorized bicycles and small 2‑stroke motors such as 49cc, 50cc, 80cc and 100cc units. The magneto's rust‑resistant exterior and the ignition coil's lighted indicator help you confirm electrical operation at a glance. Below you'll find concise answers to common buyer questions and a clear list of what this kit supplies and how it fits your engine.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit my 2‑stroke motorized bicycle?\u003c\/h3\u003e\n\n\u003cp\u003eYOXUFA designed the kit to be compatible with many 49cc–100cc single‑cylinder 2‑stroke motors used on motorized bicycles and small gas motors. Compatibility depends on physical mounting points, plug wire routing and connector types, so measure and compare with your original parts before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEngine range: 49cc, 50cc, 80cc, 100cc 2‑stroke units\u003c\/li\u003e\n  \u003cli\u003eCommon applications: motorized bicycle models including PK80, BT80, YD100 and similar\u003c\/li\u003e\n  \u003cli\u003eVerify fit: match mounting holes, coil dimensions and plug lead length\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the ignition coil's lighted section help troubleshooting?\u003c\/h3\u003e\n\n\u003cp\u003eThe built‑in illuminated section on the CDI ignition coil provides a quick visual check of whether the ignition is producing a spark when cranking the engine. This reduces guesswork during diagnostics and speeds up repairs, especially when testing wiring or switch connections.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eVisible indicator: confirms coil activation during engine cranking\u003c\/li\u003e\n  \u003cli\u003eSpeeds troubleshooting: identifies electrical faults without disassembly\u003c\/li\u003e\n  \u003cli\u003eUseful for roadside checks and first‑time tuners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the construction features that improve durability and starting?\u003c\/h3\u003e\n\n\u003cp\u003eThe magneto coil features an aluminum outer casing to resist rust and corrosion common on exposed bike parts, while heavy‑gauge copper windings provide a stronger charge for more reliable starts. The kit also includes basic fuel plumbing parts so you can address both ignition and fuel delivery at once.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAluminum exterior: corrosion resistance for longer service life\u003c\/li\u003e\n  \u003cli\u003eThick copper wire windings: easier starting and consistent spark\u003c\/li\u003e\n  \u003cli\u003eIncluded fuel line and filters: refreshes aged fuel delivery components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat exactly comes in the box and what should I check before installation?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit ships with the key ignition and fuel components needed to refresh a small 2‑stroke powerplant: magneto coil, CDI ignition coil with light, spark plug, fuel line, two fuel filters and four mounting clips. Before installing, compare the supplied parts to your original items for connector types, thread sizes and physical fit.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePacking list: magneto coil, CDI coil, spark plug, fuel line, 2 fuel filters, 4 clips\u003c\/li\u003e\n  \u003cli\u003ePre‑install checks: verify thread pitch on spark plug and coil mounting spacing\u003c\/li\u003e\n  \u003cli\u003eTools typically required: basic socket set, pliers, screwdrivers, dielectric grease\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YOXUFA kit is aimed at DIY mechanics, vintage motorized bicycle restorers and small engine owners who want an affordable, all‑in‑one ignition and fuel line refresh for 49–100cc 2‑stroke motors. If you need a plug‑and‑play replacement for worn coils and tired fuel hoses, or you want a quick way to verify ignition during troubleshooting, this kit provides the core parts needed to get your motorized bike firing again. Remember to compare the supplied part dimensions to your original components to ensure compatibility before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit fit a 50cc motorized bicycle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is compatible with many 49–50cc 2‑stroke motorized bicycle engines, but confirm your coil mounting and connector types before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What parts are included in the package?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes a magneto coil, CDI ignition coil with light, spark plug, fuel line, two fuel filters and four mounting clips.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67593399402681,"sku":"B0CMZQ1844","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-packaging-assembly.jpg?v=1790575198"},{"product_id":"yoxufa-mini-bike-clutch-cover-direct-fit-replacement-for-predator-212-196-224cc-durable-water-debris-shield","title":"YOXUFA mini bike clutch cover — direct-fit replacement for Predator 212\/196\/224cc, durable water \u0026 debris shield","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's mini bike chain guard clutch cover is a direct-replacement protective clutch cover designed to fit Predator 212\/196\/224cc and several popular mini-bike engines, shielding the clutch from water and debris.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis clutch cover from YOXUFA is engineered for riders who want a durable, straightforward replacement part that restores protection to the clutch area on a wide range of small-engine minibikes. Manufactured to match common OEM mounting points and contours, it supports models like Predator 212, Coleman CT200U, Baja MB200\/DB30 and many Motovox and Monster Moto variants. Before ordering, verify measurements and any model-specific trimming notes to ensure a correct fit.\u003c\/p\u003e\n\n\u003ch3\u003eWhich engines and minibike models will this clutch cover fit?\u003c\/h3\u003e\n\u003cp\u003eThe YOXUFA cover is made for several popular small-block engines and minibike platforms. It commonly fits Predator 212-series engines and many Coleman and Baja mini bike models, plus assorted Massimo, TrailMaster, Motovox and Monster Moto bikes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with Predator 212\/196\/224cc engine families and Tiltos*, Tecumseh*, Briggs* style layouts.\u003c\/li\u003e\n  \u003cli\u003eDirect fit for Coleman CT200U, CT100U and CT200U-EX in most cases.\u003c\/li\u003e\n  \u003cli\u003eWorks with Baja MB165\/MB200 (Mini Baja, Warrior), DB30 and similar chassis.\u003c\/li\u003e\n  \u003cli\u003eSome Monster Moto 80\/105cc installs may require minor trimming of the chain guard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this cover protect the clutch and related parts?\u003c\/h3\u003e\n\u003cp\u003eYOXUFA designed the cover to block direct exposure to rain, road spray and dirt while still allowing necessary ventilation around the clutch. That protection helps reduce corrosion and abrasive wear on the clutch pack and nearby components, helping them last longer in everyday riding conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShields clutch from water, mud and airborne debris during rides.\u003c\/li\u003e\n  \u003cli\u003eMaintains ventilation to avoid trapping heat around the clutch area.\u003c\/li\u003e\n  \u003cli\u003eSimple contouring follows common engine profiles to avoid interference.\u003c\/li\u003e\n  \u003cli\u003eEasier to clean than exposed clutch assemblies, speeding maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation difficult and what should I check before fitting?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically straightforward for owners familiar with minibike maintenance; the part mounts using the same or similar fastener points as the original cover. Before installing, compare the included part to your original cover and confirm screw locations and clearance around the chain and sprocket.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools are usually sufficient—screwdrivers and a ratchet set suffice.\u003c\/li\u003e\n  \u003cli\u003eConfirm mounting hole alignment and clutch\/chain clearance before final tightening.\u003c\/li\u003e\n  \u003cli\u003eNote: Minor trimming may be needed for certain Monster Moto 80\/105cc applications.\u003c\/li\u003e\n  \u003cli\u003eRefer to the product images and measure against your existing cover for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and how should I match sizes?\u003c\/h3\u003e\n\u003cp\u003eThe package contains one YOXUFA mini bike chain guard \/ clutch cover. Buyers should carefully review the photos and dimensions supplied to confirm fitment; this avoids returns caused by metric\/imperial or model variations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePackage includes: 1 x mini bike chain guard clutch cover (no additional hardware unless stated).\u003c\/li\u003e\n  \u003cli\u003eCheck images for mounting hole placement and overall shape before purchase.\u003c\/li\u003e\n  \u003cli\u003eCompare part to your existing cover—measurements prevent incompatibility.\u003c\/li\u003e\n  \u003cli\u003eContact seller with engine\/model details if you’re unsure about fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YOXUFA clutch cover is aimed at minibike owners and DIY mechanics who need a reliable, affordable replacement for worn or missing clutch guards on Predator-series engines, Coleman CT models, Baja and similar minibikes. It suits anyone looking to restore protection to the clutch area without expensive OEM parts—ideal for trail riders, backyard restorers, and small-engine hobbyists who can verify fit and, if needed, perform light trimming.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this cover fit my Predator 212 engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—YOXUFA is designed for Predator 212-series (including 196–224cc) engines, but confirm mounting hole alignment before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include mounting bolts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No; the package typically includes only the clutch cover. Check the listing for included hardware details before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67593541189817,"sku":"B0BF9TCCQY","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-clutch-cover.jpg?v=1790576640"},{"product_id":"yoxufa-rear-brake-master-cylinder-kit-for-90-250cc-atvs-and-pit-bikes-70-braided-line-universal-fit","title":"YOXUFA Rear Brake Master Cylinder Kit for 90–250cc ATVs and Pit Bikes — 70\" Braided Line, Universal Fit","description":"\u003cstrong\u003eYOXUFA Rear Brake Master Cylinder Reservoir Hose Line is a universal rear brake assembly that replaces or upgrades the master cylinder, reservoir hose and braided brake line for a wide range of 90–250cc ATVs, pit bikes, go-karts and small motorcycles.\u003c\/strong\u003e\n\n\u003cp\u003eThis all-in-one replacement kit bundles a rear master cylinder with reservoir hose, a 70-inch braided brake line, mounting bolts and cable ties so you can restore or improve rear braking on Arctic Cat, Suzuki, Chinese-brand ATVs, Yerf Dog, Helix, Coleman carts and many 90–250cc dirt bikes. The components are offered in commonly used lengths and include a threaded rod and pre-specified hole spacing to simplify fitment and reduce modification time.\u003c\/p\u003e\n\n\u003ch3\u003eWill this master cylinder fit my 90–250cc ATV or pit bike?\u003c\/h3\u003e\n\u003cp\u003eThe YOXUFA unit is built as a universal replacement and can be modified for many small-displacement bikes and carts. Verify the listed dimensions against your machine’s mounting points and cable routing before purchasing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTotal assembly length: 190 mm (7.48 in)\u003c\/li\u003e\n  \u003cli\u003eMounting hole spacing: 45 mm (1.77 in)\u003c\/li\u003e\n  \u003cli\u003eThreaded rod length: 66 mm (2.59 in)\u003c\/li\u003e\n  \u003cli\u003eOil tube: 292 mm (11.49 in); braided brake hose: 1778 mm (70 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit improve installation or maintenance?\u003c\/h3\u003e\n\u003cp\u003eThis package includes everything needed to install a rear brake control: master cylinder with reservoir hose, a long braided line for flexible routing, two bolts for secure mounting and ties to fasten lines. Using a braided line reduces hose expansion under load, giving crisper pedal feel compared with older rubber hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes one master cylinder and one 70\" braided brake line\u003c\/li\u003e\n  \u003cli\u003eTwo mounting bolts and six cable ties for neat routing\u003c\/li\u003e\n  \u003cli\u003ePre-measured parts cut down on trimming and guesswork\u003c\/li\u003e\n  \u003cli\u003eBraided line resists swelling for firmer braking response\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before ordering or installing?\u003c\/h3\u003e\n\u003cp\u003eConfirm your vehicle’s mounting hole distance and available hose routing space. Also compare the threaded rod engagement and reservoir hose length with your existing hardware to avoid clearance or pedal-travel issues once fitted.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompare the 45 mm hole spacing to your brake lever bracket\u003c\/li\u003e\n  \u003cli\u003eEnsure 70\" braided line reaches caliper routing path\u003c\/li\u003e\n  \u003cli\u003eCheck threaded rod length (66 mm) for clevis or pedal fit\u003c\/li\u003e\n  \u003cli\u003eVerify reservoir hose and oil tube lengths match your layout\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Mechanics, hobbyists and owners of small ATVs, pit bikes, go-karts and compact utility buggies who need a direct replacement or an upgradeable rear brake assembly. It's suited to those comfortable measuring mounting points and adapting universal parts when exact OEM spares are unavailable. If you want a ready-made kit with ample hose length and a braided line for firmer response — and you can confirm the listed dimensions fit your machine — this YOXUFA kit is a practical, cost-effective option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit compatible with my Coleman go-kart?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Measure your mounting hole spacing and hose routing. If your dimensions match the listed sizes (45 mm spacing, 70\" hose), the kit is likely compatible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the braided line require special fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes a ready-to-install braided brake hose compatible with standard small-vehicle banjo fittings; no extra adapters typically required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67593653223609,"sku":"B0BJYYBNYL","price":60.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-master-cylinder-front-view.jpg?v=1790577423"},{"product_id":"yoxufa-420-drive-chain-kit-90-link-alloy-steel-mini-bike-replacement-with-chain-breaker-adjusters","title":"YOXUFA 420 Drive Chain Kit 90‑Link — Alloy Steel Mini Bike Replacement with Chain Breaker \u0026 Adjusters","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA 420 Chain is a 90-link alloy steel replacement drive chain kit engineered for mini bikes, supplied with a chain breaker, master links, and adjusters for Coleman, Baja, Predator and similar 196–212cc models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete drive-chain kit gives you a ready-to-install replacement to restore reliable power transfer for small-engine recreational bikes. Built from wear- and corrosion-resistant alloy steel, the 420 chain suits a wide range of mini bikes and ATVs using 420-size drivetrains. The kit includes tools and hardware to trim and attach the chain to the correct length so you can fit it yourself or hand to a mechanic.\u003c\/p\u003e\n\n\u003ch3\u003eWhich bikes and engines will this 420 chain fit?\u003c\/h3\u003e\n\n\u003cp\u003eThe YOXUFA 420 Chain is designed to match mini bikes and youth off-road platforms that accept standard 420 chains. It lists direct compatibility with many Coleman, Baja, Hensim, Massimo, TrailMaster and Tomberlin models that run 196–212cc or similar 6.0–6.5hp engines. If your sprocket pitch and sprocket tooth count match a 420 system, this chain will be a suitable replacement.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible models: Coleman BT200X \/ CT200U \/ CT200U-EX, Baja MB165\/MB200, Hensim MB165\/MB200.\u003c\/li\u003e\n  \u003cli\u003eAlso fits: Massimo MB200, TrailMaster MB200, Tomberlin Firehawk 6.0 Hp, Predator 212cc\/196cc engines.\u003c\/li\u003e\n  \u003cli\u003eChain size: 420 standard pitch, 90 links (trim as needed).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the chain and what materials are used?\u003c\/h3\u003e\n\n\u003cp\u003eThis replacement chain is manufactured from high-quality alloy steel and finished to resist wear and corrosion in outdoor use. That treatment helps maintain tensile strength and reduces stretching under load compared with untreated mild-steel chains. Regular inspection and lubrication are still recommended to maximize service life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial: alloy steel construction for improved strength.\u003c\/li\u003e\n  \u003cli\u003eSurface finish: wear- and corrosion-resistant coating.\u003c\/li\u003e\n  \u003cli\u003eExpected care: periodic cleaning and lubrication for best longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and accessories come with the kit, and how do I install it?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit ships with a 420-530 style chain breaker, five master links, and two 15mm chain adjusters so you can size and secure the chain without sourcing extra parts. Use the breaker to remove excess links, fit the chain around the sprockets, then secure a master link and adjust chain tension with the included adjusters. If you’re not comfortable with mechanical work, a small-shop mechanic can complete installation quickly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 chain breaker, 5 master links, 2 15mm adjusters.\u003c\/li\u003e\n  \u003cli\u003eSteps: measure required length, use breaker to remove links, fit master link, set tension with adjusters.\u003c\/li\u003e\n  \u003cli\u003eTip: align sprockets and spin wheels to check smooth engagement before final tightening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this chain require any special maintenance or adjustments?\u003c\/h3\u003e\n\n\u003cp\u003eMaintenance is straightforward and similar to most drive chains: keep the chain clean, lubricated, and correctly tensioned. New chains may settle slightly during the first hours of use, so recheck tension after initial rides and periodically thereafter. Replace the chain if you notice significant stretch, rust-through, or damaged rollers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInitial break-in: recheck and retension after first few rides.\u003c\/li\u003e\n  \u003cli\u003eOngoing: clean and apply chain lubricant regularly, inspect for wear.\u003c\/li\u003e\n  \u003cli\u003eReplacement signs: excessive slack, seized links, or visible corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The YOXUFA 420 Chain kit is aimed at mini bike owners, backyard builders and small repair shops needing a reliable, ready-to-fit replacement for 196–212cc mini bike drivetrains. It’s useful for DIYers who want a complete package with tools and spare master links, and for mechanics who prefer a corrosion-resistant alloy option when servicing Coleman, Baja, Predator and similar models.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this 420 chain compatible with Predator 212cc engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The YOXUFA 420 Chain fits many Predator 212cc and similar 196–212cc mini bike setups that use 420-size chains.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include everything needed to shorten the chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It includes a 420-530 chain breaker and extra master links so you can remove links and reattach the chain.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67593795961017,"sku":"B0CT82QTXB","price":65.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-420-chain-front-packaging_38191690-d8af-4e6e-aa9e-4a3e973127bc.jpg?v=1790578953"},{"product_id":"yoxufa-35-roller-chain-for-mini-bike-140-link-drive-chain-with-10-master-links-for-79-100cc-engines","title":"YOXUFA #35 Roller Chain for Mini Bike — 140-Link Drive Chain with 10 Master Links for 79–100cc Engines","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA #35 roller chain is a replacement 140-link drive chain engineered for small-frame mini bikes and 79–100cc predator-style engines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy-duty #35 chain is sized and supplied to fit a broad range of mini bikes and off-road pocket bikes—offering a straightforward, field-serviceable option when your original drive chain wears out or you need to rebuild a drivetrain. The kit arrives with ten master\/connecting links so you can trim length or join the chain without special press tools. Before ordering, compare your current chain pitch and total link count to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eWill this chain fit my mini bike model?\u003c\/h3\u003e\n\u003cp\u003eYOXUFA designed this #35 roller chain to match many common small-bore mini bikes. It is compatible with several Coleman, Baja, Motovox, Monster Moto, Mega Moto, and Realtree-style models listed below, but fit depends on the exact sprocket sizes and frame routing of your machine.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirmed model compatibility: Coleman CT100U, CC100X.\u003c\/li\u003e\n  \u003cli\u003eBaja series: Doodle Bug DB30 and related Blitz, Dirt Bug, Viper versions.\u003c\/li\u003e\n  \u003cli\u003eMotovox MBX10, MBX11 and Monster Moto MM-B80\/MM-B105, Mega Moto Classic MM-B80\/MM-B105.\u003c\/li\u003e\n  \u003cli\u003eWorks with Predator 79cc, 97cc and 100cc engine installations when matched to correct sprockets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I size and shorten the chain correctly?\u003c\/h3\u003e\n\u003cp\u003eThe supplied chain includes 140 links (70 inner + 70 outer) so you can remove links to achieve the required length. Use the included connecting master links to rejoin the chain after trimming; basic hand tools or a small punch and pliers are usually enough for field adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure the old chain or wrap around sprockets to determine needed length before cutting.\u003c\/li\u003e\n  \u003cli\u003eRemove pairs of inner\/outer links to keep the chain consistent.\u003c\/li\u003e\n  \u003cli\u003eUse the 10 included master links to finish connections—no special rivet tools required for most installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the construction and maintenance advice?\u003c\/h3\u003e\n\u003cp\u003eThis #35 roller chain is manufactured for small-vehicle drivetrains, balancing strength and flexibility for low-to-moderate power setups. Regular lubrication and correct tension will maximize service life and reduce premature wear on sprockets and chain plates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChain type: #35 roller chain with standard plate and pin assembly.\u003c\/li\u003e\n  \u003cli\u003eMaintenance: clean debris, apply chain lubricant, and set correct tension periodically.\u003c\/li\u003e\n  \u003cli\u003eInspection: check for stiff links, elongation, or damaged rollers; replace if excessive wear is visible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and special notes?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains one 140-link #35 chain and ten #35 connecting master links so you can size it to your bike and secure the joint. Double-check the pitch (#35) and your original chain length to avoid ordering an incompatible item.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 x #35 mini bike chain (140 links) and 10 x #35 connecting\/master links.\u003c\/li\u003e\n  \u003cli\u003eFlexible length: trim or expand using the internal\/external link pairs.\u003c\/li\u003e\n  \u003cli\u003eImportant: verify original chain pitch and total length before purchase to ensure fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YOXUFA #35 roller chain is best for DIY mechanics, small-vehicle enthusiasts, and repair shops working on pocket bikes, mini bikes or small-frame ATVs that use #35 pitch drivetrains. If you run a Coleman CT100U or similar Baja, Motovox, Monster Moto, Mega Moto, or Predator-powered mini bike and you need a serviceable, easy-to-adjust replacement chain with spare master links, this kit gives the parts and flexibility to complete most routine drive-train repairs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this chain the same as the stock chain on Coleman CT100U?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Many Coleman CT100U bikes use #35 pitch chains; verify your old chain pitch and length to confirm compatibility before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special tools to join or shorten this chain?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installs can be done with basic hand tools, pliers, and a punch; the kit includes master links for simpler connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67594664476857,"sku":"B09PZYXK6R","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-packaging-chain.jpg?v=1790584548"},{"product_id":"yoxufa-motorized-bike-ignition-kit-cdi-ignition-coil-magneto-for-49-100cc-2-stroke-engines-includes-spark-plug-fuel-filters","title":"YOXUFA Motorized Bike Ignition Kit — CDI Ignition Coil \u0026 Magneto for 49–100cc 2-Stroke Engines, Includes Spark Plug \u0026 Fuel Filters","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's motorized bike ignition kit delivers a complete CDI ignition coil and magneto assembly designed to replace worn components on 49cc–100cc 2-stroke engines quickly and reliably.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your motorized bicycle is running rough, hard to start, or producing inconsistent spark, the problem can often be traced to the ignition system. This kit from YOXUFA includes a CDI ignition coil, magneto coil, spark plug, fuel line, fuel filters, and mounting clips so you can restore dependable ignition and fuel delivery without hunting for separate parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat exactly comes in this replacement ignition kit?\u003c\/h3\u003e\n\u003cp\u003eThe package bundles the core electrical and basic fuel parts you need to swap into compatible 2-stroke engines. Components are selected to match the form and fit of many common small engine models so installation is straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x magneto coil and 1x CDI ignition coil engineered for 49–100cc 2-stroke engines\u003c\/li\u003e\n  \u003cli\u003e1x spark plug to complete the ignition circuit\u003c\/li\u003e\n  \u003cli\u003e1x fuel line and 2x inline fuel filters for cleaner flow\u003c\/li\u003e\n  \u003cli\u003e4x mounting clips for securing hoses and wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will this kit affect starting and running performance?\u003c\/h3\u003e\n\u003cp\u003eReplacing a faulty coil or magneto can dramatically improve ignition strength and timing consistency, which helps the engine start more easily and run with fewer misfires. The included spark plug and filters further support steady combustion and fuel delivery.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStronger, more consistent spark for faster starts\u003c\/li\u003e\n  \u003cli\u003eReduced misfires and smoother idling under load\u003c\/li\u003e\n  \u003cli\u003eCleaner fuel flow from included inline filters\u003c\/li\u003e\n  \u003cli\u003eAll-in-one set avoids sourcing multiple parts separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the YOXUFA kit compatible with my engine model?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed to fit a wide range of small 2-stroke engines commonly found on motorized bicycles, including many PK80, BT80, and YD100 variants. Verify fitment by comparing mounting points and electrical connections to your original components before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 49cc, 50cc, 66cc, 80cc, and 100cc two-stroke engines\u003c\/li\u003e\n  \u003cli\u003eCommonly compatible with PK80, BT80, and YD100 style motors\u003c\/li\u003e\n  \u003cli\u003eMatch coil housing and connector types to original parts\u003c\/li\u003e\n  \u003cli\u003eConsult product description and images for exact fit cues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is intended to be straightforward for riders with basic mechanical skills. Typical tools and a little patience are all that's required to swap the coil and connect the fuel line and filters; a torque wrench and pliers are useful for secure mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBasic hand tools: screwdrivers, pliers, and socket set\u003c\/li\u003e\n  \u003cli\u003eDisconnect the battery or kill switch before starting work\u003c\/li\u003e\n  \u003cli\u003eConfirm wiring polarity and routing to avoid short circuits\u003c\/li\u003e\n  \u003cli\u003eSecure fuel line with supplied clips to prevent leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this kit for? The YOXUFA Motorized Bike CDI Ignition Coil + Magneto Coil Kit is aimed at DIY mechanics, hobbyists, and riders restoring or maintaining 2-stroke motorized bicycles. It suits anyone who wants a single, matched package of ignition and basic fuel components to replace worn or damaged parts on 49cc–100cc engines. If you’re unsure about compatibility or need guidance, check your engine model and the part shapes in the photos before purchasing, or reach out to a mechanic for help.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which engine sizes are supported by this kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit supports 49cc, 50cc, 66cc, 80cc, and 100cc two-stroke motorized bike engines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include a spark plug and fuel filters?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it includes one spark plug, one fuel line, two fuel filters, and four mounting clips.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67594844733625,"sku":"B0BXWWMCCT","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-view-ignition-kit.jpg?v=1790585352"},{"product_id":"yoxufa-recoil-pull-starter-for-196cc-212cc-engines-fits-predator-gx120-gx160-gx200-6-5hp-direct-fit-replacement","title":"YOXUFA Recoil Pull Starter for 196cc–212cc Engines — Fits Predator GX120\/GX160\/GX200, 6.5hp Direct-Fit Replacement","description":"\u003cstrong\u003eYOXUFA Recoil Pull Starter is a high‑compatibility replacement starter assembly designed to fit 196cc–212cc small engines used on mini bikes, go‑karts, generators, pressure washers and garden equipment.\u003c\/strong\u003e\n\n\u003cp\u003eIf your engine's recoil starter is worn, broken, or slipping, this YOXUFA assembly provides a direct-fit replacement for many popular 5.5–6.5 hp engines and chassis models. Engineered to match the mounting pattern and dimensions used by Predator, GX series, Coleman, Baja, Massimo and TrailMaster-powered machines, the unit includes the starter housing, starter cup, mounting bolts and a spark plug to help you get back up and running quickly.\u003c\/p\u003e\n\n\u003ch3\u003eWill this recoil starter fit my Predator, GX or Coleman 196cc–212cc engine?\u003c\/h3\u003e\n\u003cp\u003eIn most cases yes — the YOXUFA starter is made for common 196cc and 212cc engine platforms and the GX120\/GX160\/GX200 families. Verify hole spacing and engine model to confirm compatibility before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits engines rated about 5.5–6.5 hp and 196cc–212cc displacement.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Predator, GX series, Harbor Freight, Coleman CT200U family.\u003c\/li\u003e\n  \u003cli\u003eAlso suits many mini bike, go‑kart and small equipment applications.\u003c\/li\u003e\n  \u003cli\u003eCheck mounting hole distances and bolt pattern provided in listing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat mounting dimensions and hardware are included?\u003c\/h3\u003e\n\u003cp\u003eThe product ships with the parts and bolts you need for installation and lists precise measurements for the mounting pattern so you can compare to your engine flange.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting hole distance (adjacent): 80 mm.\u003c\/li\u003e\n  \u003cli\u003eCenter‑to‑center triangle pattern: 138 mm; diagonal: 159 mm.\u003c\/li\u003e\n  \u003cli\u003eMounting hole diameter: 6 mm (0.23 in).\u003c\/li\u003e\n  \u003cli\u003eIncluded: 1 pull starter, starter cup, 6 bolts and 1 spark plug.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow straightforward is installation and what tools will I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a straightforward bolt‑on replacement if your engine uses the same bolt pattern. Basic hand tools and a moment of mechanical familiarity are usually sufficient.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eYou’ll need common sockets or spanners that fit the supplied bolts (check bolt head size).\u003c\/li\u003e\n  \u003cli\u003eRemoval of old starter may require a screwdriver or pry tool to release clips.\u003c\/li\u003e\n  \u003cli\u003eAlign the starter cup and bolt holes, then torque bolts evenly to secure.\u003c\/li\u003e\n  \u003cli\u003eTest the pull action before final assembly to confirm smooth engagement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich machines and use cases is this starter intended for?\u003c\/h3\u003e\n\u003cp\u003eThis starter is aimed at owners of small recreational and light‑duty commercial equipment who require a reliable replacement part that matches several popular engine families and chassis models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMini bikes and go‑karts: Coleman CT200U\/CT200U‑EX, KT196, MB165\/MB200, TrailMaster variants.\u003c\/li\u003e\n  \u003cli\u003eUtility engines: generators, pressure washers, water pumps, air compressors, mowers.\u003c\/li\u003e\n  \u003cli\u003eAftermarket and modified vehicles using Predator or GX‑style engines.\u003c\/li\u003e\n  \u003cli\u003eDIY repairs where a quick, cost‑effective starter swap is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This YOXUFA recoil pull starter is best for hobbyists, small‑engine repairers and owners of mini bikes, go‑karts and light equipment who have confirmed their engine uses the specified 196cc–212cc bolt pattern. If you maintain generators, pressure washers or garden tools powered by Predator or GX family engines and need a ready‑to‑install replacement with included hardware, this unit is a practical match. Always cross‑check the provided mounting dimensions and compatibility list with your machine before purchase to ensure correct fit and function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this starter fit Predator 212cc engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it fits many Predator 196cc–212cc engines, but confirm your engine’s bolt pattern matches the listed measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bolts and installation parts included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package contains the pull starter, starter cup, six bolts and a spark plug for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67595225956537,"sku":"B0B4D9HYWV","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-view-assembly.jpg?v=1790586763"},{"product_id":"yoxufa-left-engine-stator-cover-for-50-125cc-lifan-pattern-pit-bikes-black-3-screws-253-136-62mm","title":"YOXUFA Left Engine Stator Cover for 50–125cc Lifan-Pattern Pit Bikes — Black, 3 Screws \u0026 253×136×62mm","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA Left Engine Stator Cover is a direct-fit replacement\/upgrade cover for many 50cc–125cc Chinese Lifan-style pit and dirt bike engines, supplied in black with mounting screws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis left-side stator cover is made to match common Lifan-pattern engine housings used across a wide range of small-displacement pit bikes and scooters. It arrives as a complete kit with three screws and measures 253mm long, 136mm wide and 62mm tall, with three 7mm mounting holes—dimensions that let it be used as a straight replacement or adjusted slightly for a snug fit on models like SSR, TaoTao, Coolster, Madmax, Apollo, Baja, X-Pro, Stomp, Thumpstar, Roketa and others that use the Lifan motor layout.\u003c\/p\u003e\n\n\u003ch3\u003eWill this stator cover fit my 50cc–125cc pit bike?\u003c\/h3\u003e\n\n\u003cp\u003eCompatibility depends on engine pattern, not just displacement. It’s designed for Lifan-pattern engines and many Chinese-made pit bikes share that layout, but confirm measurements before ordering.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFits many 50cc, 70cc, 90cc, 110cc and 125cc bikes with Lifan-style engines.\u003c\/li\u003e\n  \u003cli\u003eDimensions: 253mm (L) × 136mm (W) × 62mm (H).\u003c\/li\u003e\n  \u003cli\u003eMount holes: three holes, 7mm (0.27\") diameter each.\u003c\/li\u003e\n  \u003cli\u003eMay require light trimming or repositioning on non-identical casings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what’s included?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone familiar with basic engine work: remove the old cover, check gasket and stator alignment, then bolt the new cover in place using the supplied screws. No gasket or sealant is included, so plan accordingly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncluded: 1 black left engine stator cover and 3 mounting screws.\u003c\/li\u003e\n  \u003cli\u003eTypical install time: 15–45 minutes depending on access and experience.\u003c\/li\u003e\n  \u003cli\u003eMay need a replacement gasket or silicone sealant (not supplied).\u003c\/li\u003e\n  \u003cli\u003eMinor modification can be required for some non‑identical housings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and finish should I expect?\u003c\/h3\u003e\n\n\u003cp\u003eThe cover is finished in a durable black coating to resist road grime and light corrosion; it’s built to withstand the typical conditions encountered by trail and pit bikes. The part’s form is crafted to protect the stator assembly and wiring while providing a clean replacement appearance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDurable black finish for a neutral OEM-style look.\u003c\/li\u003e\n  \u003cli\u003eSturdy construction suitable for everyday trail use.\u003c\/li\u003e\n  \u003cli\u003eShields the stator, wiring and internal components from debris.\u003c\/li\u003e\n  \u003cli\u003eDesigned to match the contour of Lifan-pattern engine cases.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this cover as an upgrade or for repairs?\u003c\/h3\u003e\n\n\u003cp\u003eYes—this cover serves both repair and replacement needs, and in many cases it’s used as an affordable upgrade to restore function and appearance after damage. If your original is cracked, warped or heavily corroded, this is a practical replacement option.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCommon replacement for cracked or leaking original covers.\u003c\/li\u003e\n  \u003cli\u003eWorks as a budget-friendly restoration part for older bikes.\u003c\/li\u003e\n  \u003cli\u003eSimple modifications can adapt it to a broader range of housings.\u003c\/li\u003e\n  \u003cli\u003eComes in black for a neat, factory-like finish after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this part is for: riders, home mechanics and small repair shops who own or service Chinese-made pit and dirt bikes with Lifan-style engines—especially owners of SSR, TaoTao, DB24\/DB17\/DB27, Coolster, Madmax, Apollo, Baja, X-Pro, Stomp, Thumpstar, Roketa and similar models looking for a reliable left-side stator cover replacement in black. Verify the three 7mm mounting-hole spacing and the 253 × 136 × 62mm overall size against your existing cover to ensure a smooth swap. For a confident fit, inspect the stator opening, gasket condition and bolt pattern before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this cover include a gasket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, a gasket or sealant is not included; you should reuse your original gasket or buy a new one.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it fit non-Lifan engines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s built for Lifan-pattern engines; minor trimming may allow fit on some other Chinese engine casings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67595478270137,"sku":"B0B8RZQ3BT","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-left-stator-cover-front-view.jpg?v=1790588088"},{"product_id":"yoxufa-13mm-kick-start-lever-for-50-125cc-dirt-pit-bikes-right-side-heat-treated-cast-iron-auto-return","title":"YOXUFA 13mm Kick Start Lever for 50–125cc Dirt\/Pit Bikes — Right-Side, Heat-Treated Cast Iron, Auto-Return","description":"\u003cp\u003e\u003cstrong\u003eYOXUFA's 13mm kick start lever is a heavy-duty, right-side replacement designed to fit many 50–125cc Chinese pit and dirt bikes, delivering smooth rebound and long-lasting durability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your bike's OEM kickstarter is worn, bent, or broken, this replacement from YOXUFA provides a direct-fit solution engineered for popular models such as SSR SR125TR, TaoTao DB14\/DB27, Apollo RFZ125 and similar 50–125cc pit bikes. Built from heat-treated cast iron with a black enamel finish, the lever resists stripping and surface damage while matching stock mounting dimensions for straightforward installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhich motorcycles will this kick start lever fit?\u003c\/h3\u003e\n\u003cp\u003eThe lever is made to match the right-side kickstart layout and 13 mm mounting hole common on many Chinese 50–125cc dirt bikes. Before ordering, confirm your bike uses a right-side kicker and that the 13 mm (0.5\") shaft size fits your crank.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible models: SSR SR125TR, SR110TR, SR70C\u003c\/li\u003e\n  \u003cli\u003eTaoTao: DB14, DB27, DBX14, DBX18\u003c\/li\u003e\n  \u003cli\u003eApollo RFZ125, PW80, KE100, X-pro X27, Coolster, Ice Bear, Venom, Lifan, Zongshen, Kayo\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is the YOXUFA kick starter?\u003c\/h3\u003e\n\u003cp\u003eThis lever is cast from heat-treated iron and finished with black enamel to resist scratches and corrosion. Anti-stripping spline design and a reinforced pedal area reduce the risk of breakage under heavy use, making it a robust alternative to many OEM units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: cast heat-treated iron for high impact resistance\u003c\/li\u003e\n  \u003cli\u003eSurface: black enamel protects against wear and weather\u003c\/li\u003e\n  \u003cli\u003eDesign: anti-stripping splines to maintain secure engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes it improve starting feel and installation time?\u003c\/h3\u003e\n\u003cp\u003eYes — the pivot and rebound mechanism is optimized for a smooth, low-effort kick and automatic return to the horizontal position after use. Installation is engineered to be plug-and-play, letting most riders swap the lever in minutes without special tools or adjustments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEffort: smoother rebound reduces kicking force required\u003c\/li\u003e\n  \u003cli\u003eAuto-return: lever springs back to avoid interference while riding\u003c\/li\u003e\n  \u003cli\u003eFitment specs: mounting hole 13 mm (0.5\"), pedal length 55 mm (2.2\"), overall length 220 mm (8.7\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I verify fitment before purchasing?\u003c\/h3\u003e\n\u003cp\u003eMeasure your current kickstarter shaft diameter and compare mounting hole size, and confirm your bike uses a right-side kick lever. Check the pedal and overall length if clearance near shifters or frame is limited.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify shaft\/mount: 13 mm (0.5\") diameter required\u003c\/li\u003e\n  \u003cli\u003eConfirm side: designed for right-side kickstart setups only\u003c\/li\u003e\n  \u003cli\u003eMeasure clearance: pedal 55 mm, total length 220 mm to avoid contact issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Riders and mechanics who need a dependable, direct-replacement kickstarter for Chinese-made 50–125cc pit and dirt bikes. It's ideal for anyone seeking a stronger, longer-lasting lever than many stock parts, plus quick installation for weekend repairs or track prep. If your bike matches the listed models and dimensions, this YOXUFA lever offers a practical upgrade to restore reliable kickstarting without complex modification.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kickstarter compatible with left-side kickstart bikes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This YOXUFA lever is designed exclusively for right-side kickstart setups and will not fit left-side configurations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra parts or modifications to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally no. It supports direct installation on compatible 13 mm shafts and usually installs in minutes without additional parts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"YOXUFA","offers":[{"title":"Default Title","offer_id":67595596202169,"sku":"B0B2CNPB5D","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/yoxufa-front-view-kickstarter.jpg?v=1790590487"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/collections\/yoxufa-front-view-kickstarter.jpg?v=1790612592","url":"https:\/\/redleafauto.ca\/collections\/yoxufa.oembed","provider":"Redleaf Auto","version":"1.0","type":"link"}