{"product_id":"3m-bondo-glazing-and-spot-putty-2-pack-2-x-4-5-oz-nitrocellulose-red-one-part-fast-drying-low-shrink","title":"3M Bondo Glazing and Spot Putty 2-Pack (2 x 4.5 oz) — Nitrocellulose Red, One-Part Fast-Drying, Low-Shrink","description":"\u003cstrong\u003e3M Bondo Glazing and Spot Putty is a one-part, nitrocellulose red finishing putty sold as a 2-tube pack (2 x 4.5 oz) for filling pinholes, light scratches and small surface imperfections before primer and paint.\u003c\/strong\u003e\n\n\u003cp\u003eThis 2-pack gives collision shops and DIY restorers nine ounces of ready-to-use glazing and spot putty designed for quick, fine finishing work on metal, fiberglass and properly prepared wood. Because the formula is one-part, there’s no mixing with hardener — simply dispense, spread a thin coat, let it set, and sand. The putty sands smooth in about 30 minutes and is formulated to be low-shrink and non-staining so repaired areas feather into primer and topcoat with consistent results.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this putty speed up small repair jobs?\u003c\/h3\u003e\n\u003cp\u003eIts one-part nitrocellulose formula removes the need to measure or mix hardener, letting you apply the product directly from the tube for quick spot work. Short work and dry times help you move from filling to sanding and priming within the same shift.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply directly from 4.5 oz tubes — no mixing required\u003c\/li\u003e\n  \u003cli\u003eApproximately three minutes of working time per application\u003c\/li\u003e\n  \u003cli\u003eSandable in roughly 30 minutes to keep cycles moving\u003c\/li\u003e\n  \u003cli\u003eLow-shrink formula reduces rework after sanding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat types of defects and surfaces is this best for?\u003c\/h3\u003e\n\u003cp\u003eThis glazing and spot putty is formulated to handle minor surface flaws such as pinholes, rock chips, tiny dents, and shallow scratches that remain after bulk filler. It bonds well to metal panels, fiberglass parts and prepared wood where automotive-style refinishing will follow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFills pinholes and minor lows in body filler\u003c\/li\u003e\n  \u003cli\u003eRepairs light scratches, nicks and rock chips\u003c\/li\u003e\n  \u003cli\u003eWorks on prepared metal, fiberglass and wood surfaces\u003c\/li\u003e\n  \u003cli\u003eIdeal between bulk filler and primer\/topcoat stages\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply and finish the product for best results?\u003c\/h3\u003e\n\u003cp\u003eSqueeze a thin layer directly from the tube into the defect and use a clean spreader or finger (with glove) to feather edges smooth. Allow the putty to reach sandable firmness, then use appropriate grit progression to blend into surrounding substrate before priming and painting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean and sand repair area prior to application\u003c\/li\u003e\n  \u003cli\u003eApply thin coats; avoid overfilling to reduce sanding time\u003c\/li\u003e\n  \u003cli\u003eWait about 30 minutes, then sand to feather with fine grit\u003c\/li\u003e\n  \u003cli\u003ePrime and topcoat after surface is smooth and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich professionals or projects benefit most from this 2-pack?\u003c\/h3\u003e\n\u003cp\u003eShops that do frequent small repairs, restoration enthusiasts and home garages all benefit from having extra tubes on hand for quick touch-ups. The tube format and 2-pack quantity reduce downtime and make it easy to keep a fresh tube available on the cart or bench.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCollision repair shops needing reliable spot putty between filler and primer\u003c\/li\u003e\n  \u003cli\u003eDIY restorers working on automotive panels, trim and fiberglass parts\u003c\/li\u003e\n  \u003cli\u003eHobbyists doing wood or metal refinishing that requires spot filling\u003c\/li\u003e\n  \u003cli\u003eAnyone who wants a ready-to-use, low-shrink finish putty in tube form\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: 3M Bondo Glazing and Spot Putty 2-Pack is aimed at professionals and skilled DIYers who need a fast, easy-to-use finishing putty for small defects. If you perform regular panel repairs or restorations and want a shop-ready product that dispenses from tubes with minimal prep and cleanup, this two-tube set supplies convenient coverage and consistent, sandable results before priming and painting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to mix hardener with 3M Bondo Glazing and Spot Putty?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — it is a one-part nitrocellulose formula that dispenses from the tube without mixing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before I can sand the putty after application?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typically the putty becomes sandable in about 30 minutes under normal shop conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":67593876963513,"sku":"B0GT171P17","price":52.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/3m-bondo-front-packaging_762dd7fa-268c-47da-a6c1-7161d0c317b5.jpg?v=1790580187","url":"https:\/\/redleafauto.ca\/products\/3m-bondo-glazing-and-spot-putty-2-pack-2-x-4-5-oz-nitrocellulose-red-one-part-fast-drying-low-shrink","provider":"Redleaf Auto","version":"1.0","type":"link"}