{"product_id":"camotokiit-two-piece-wheel-nuts-m22x1-5-28mm-sleeve-33mm-hex-6pc-grade-8-phosphate","title":"Camotokiit Two-Piece Wheel Nuts M22x1.5 — 28mm Sleeve 33mm Hex, 6PC Grade 8 Phosphate","description":"\u003cstrong\u003eThese Camotokiit 6PCS two-piece wheel nuts are M22x1.5, feature a 28mm sleeve with a 33mm hex, and are built for Uni‑Mount 10‑hole hub‑piloted wheels on semi trucks.\u003c\/strong\u003e\n\n\u003cp\u003eDesigned for heavy‑duty commercial vehicles, this set of six two‑piece flange wheel nuts provides a serviceable, high‑strength fastener solution for Uni‑Mount hub pilot \/ unimount wheel systems. Constructed from Grade 8 steel with a phosphate finish, the nuts are engineered to meet the demands of axle torque and repeated service while matching a range of OEM part numbers for straightforward replacement.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these wheel nuts fit my Uni‑Mount 10‑hole wheels?\u003c\/h3\u003e\n\u003cp\u003eThese nuts are specifically sized for hub‑piloted Uni‑Mount wheels with ten holes. The M22x1.5 thread and 28mm sleeve establish correct seating and alignment on hub pilots, while the 33mm hex allows use with standard heavy‑duty socket tools.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM22x1.5 thread pitch for direct compatibility.\u003c\/li\u003e\n  \u003cli\u003e28mm sleeve length for proper hub pilot engagement.\u003c\/li\u003e\n  \u003cli\u003e33mm hex head to work with common truck torque tools.\u003c\/li\u003e\n  \u003cli\u003eDesigned for 10‑hole Uni‑Mount hub‑piloted wheel patterns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat strength and finish do these nuts have?\u003c\/h3\u003e\n\u003cp\u003eEach nut is made from Grade 8 steel to deliver high tensile strength required for commercial wheel applications. A phosphate exterior finish provides surface protection and helps resist corrosion in typical road environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGrade 8 steel construction for durable clamping force.\u003c\/li\u003e\n  \u003cli\u003ePhosphate finish to reduce surface corrosion.\u003c\/li\u003e\n  \u003cli\u003eTwo‑piece flange design improves washer and seat replacement options.\u003c\/li\u003e\n  \u003cli\u003eBlack color to match common wheel finishes and reduce glare.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these a direct replacement for OEM parts I may have?\u003c\/h3\u003e\n\u003cp\u003eYes — the Camotokiit set covers multiple OEM equivalents so you can replace worn or missing nuts without modifying the wheel or hub. Cross references include popular part numbers used by wheel and fastener suppliers for Uni‑Mount systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaces BWP M‑4216, Automan 201.3033, and Ascot 491‑02928.\u003c\/li\u003e\n  \u003cli\u003eAlso compatible with World American WA07‑8028 and Sirco 333SN28 listings.\u003c\/li\u003e\n  \u003cli\u003eSold as a 6‑piece kit for matching fasteners on one wheel or as spares.\u003c\/li\u003e\n  \u003cli\u003eTwo‑piece design simplifies servicing and seal area maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat torque and installation practices should I follow?\u003c\/h3\u003e\n\u003cp\u003eTorque requirements for heavy commercial wheels are critical for safety; these nuts are rated to be tightened to the heavy‑duty range typical of semi applications. Use calibrated torque tools and follow vehicle manufacturer tightening sequences and re‑torque intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended torque range: approximately 450–500 ft·lbs.\u003c\/li\u003e\n  \u003cli\u003eUse a 33mm socket and an accurate torque wrench or indicator.\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer wheel bolt pattern and staged tightening sequence.\u003c\/li\u003e\n  \u003cli\u003eInspect threads and replace nuts if any deformation or corrosion is present.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Truck fleet managers, heavy equipment mechanics, and owner‑operators who run Uni‑Mount hub‑piloted 10‑hole wheels will find these Camotokiit wheel nuts suitable for both routine maintenance and emergency replacement. They are intended for professionals and experienced technicians who can apply correct torque and inspection procedures; if you're unsure about fitment or torque practice, consult the wheel or vehicle manufacturer before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these nuts fit Uni‑Mount 10‑hole hub‑piloted wheels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. They are M22x1.5 with a 28mm sleeve specifically for Uni‑Mount 10‑hole hub‑piloted wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What torque should I use when installing these nuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Torque them to roughly 450–500 ft·lbs using a calibrated 33mm socket and follow the wheel manufacturer's tightening sequence.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Camotokiit","offers":[{"title":"Default Title","offer_id":67588834197689,"sku":"B0F5PMYLGT","price":92.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/camotokiit-front-view-packaging-wheel-nuts.jpg?v=1790526154","url":"https:\/\/redleafauto.ca\/products\/camotokiit-two-piece-wheel-nuts-m22x1-5-28mm-sleeve-33mm-hex-6pc-grade-8-phosphate","provider":"Redleaf Auto","version":"1.0","type":"link"}