{"product_id":"evil-energy-3-8-fuel-hose-25ft-sae-30r7-nbr-rubber-300-psi-oil-resistant-reinforced","title":"EVIL ENERGY 3\/8\" Fuel Hose 25FT SAE 30R7 NBR Rubber — 300 PSI Oil-Resistant Reinforced","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 3\/8\" Fuel Hose is a 25-foot SAE 30R7 compliant NBR rubber fuel line engineered for fuel, oil and biodiesel use at up to 300 PSI working pressure.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis reinforced fuel hose combines nitrile-butadiene rubber (NBR) and braided polyester fiber to deliver an oil-resistant, wear-resistant line for automotive and industrial fuel systems. Sized for 3\/8\" (9.5 mm) inner diameter with an outer diameter near 17 mm, the hose is built to handle a wide temperature span and meet SAE 30R7 performance norms. Below you’ll find concise answers to common buyer questions, technical highlights, fit and use suggestions, and a clear summary of who benefits most from this hose.\u003c\/p\u003e\n\n\u003ch3\u003eWhat fluids and environments is this hose compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe hose is formulated from NBR rubber and reinforced with polyester braid to resist swelling, abrasion and oil degradation. It accepts diesel, gasoline, biodiesel blends, oil and grease, making it suitable for fuel feed lines, oil cooling circuits and other petroleum-related applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible media: gasoline, diesel, biodiesel, oil, grease\u003c\/li\u003e\n  \u003cli\u003eMaterial resistance: oil-resistant NBR inner tube\u003c\/li\u003e\n  \u003cli\u003eReinforcement: braided polyester fiber for strength and flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow strong and flexible is the hose for routine installation?\u003c\/h3\u003e\n\u003cp\u003eDesigned for a 300 PSI working pressure and a 1200 PSI burst rating, this hose provides a wide safety margin for typical fuel-system pressures. A minimum bend radius of 3.9\" (100 mm) and 3 mm wall thickness let you route the hose through tight areas without kinking when installed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 300 PSI; burst pressure: 1200 PSI\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius: 3.9\" (100 mm) to avoid kinks\u003c\/li\u003e\n  \u003cli\u003eWall thickness: approximately 3 mm for durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and length does this product come in, and how do I confirm fit?\u003c\/h3\u003e\n\u003cp\u003eThis listing supplies a 25-foot continuous length with a 3\/8\" (9.5 mm) nominal inner diameter and roughly 17 mm outer diameter. Confirm hose ID and hose-end fittings on your equipment; push-lock or barb connectors sized for 3\/8\" ID are the typical match for secure connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 25 feet continuous hose\u003c\/li\u003e\n  \u003cli\u003eInner diameter: 3\/8\" (9.5 mm); outer diameter: ~17 mm\u003c\/li\u003e\n  \u003cli\u003eRecommended fittings: push-lock or 3\/8\" barb clamps for secure seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat temperature and regulatory characteristics should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe hose operates across a wide temperature window, suitable for cold starts and high-heat environments where fuel routing or oil cooling occurs. It meets SAE 30R7 construction standards for fuel hose, making it appropriate for many automotive and machinery fuel-system uses (verify compatibility with local regulations and specific fluids before use).\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature range: -40°F to 257°F (-40°C to 125°C)\u003c\/li\u003e\n  \u003cli\u003eStandard: built to exceed SAE 30R7 requirements\u003c\/li\u003e\n  \u003cli\u003eUse note: validate chemical compatibility and local codes for application\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Mechanics, fleet maintenance teams, off-road vehicle owners and DIY enthusiasts who need a durable, oil-resistant fuel line will find this EVIL ENERGY hose suitable for replacement or custom routing in fuel supply, oil cooling and similar petroleum-handling systems. Its 25-foot length and robust specs make it practical for workshop spares, hose runs through engine bays, or on-site repairs where a reliable, flexible line is required. As with any fuel or oil installation, use appropriate clamps, inspect fittings periodically, and replace if abrasion or hardening appears.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for biodiesel blends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the NBR inner tube and polyester braid accept common biodiesel blends; confirm specific blend compatibility before prolonged use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use standard clamps on this hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Use properly sized worm-drive or crimp clamps on 3\/8\" barbs or push-lock fittings for a secure seal.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67586497478841,"sku":"B08F57FLF4","price":123.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging_55962ee2-30c5-406f-a7d0-5e605b76cb7f.jpg?v=1790484841","url":"https:\/\/redleafauto.ca\/products\/evil-energy-3-8-fuel-hose-25ft-sae-30r7-nbr-rubber-300-psi-oil-resistant-reinforced","provider":"Redleaf Auto","version":"1.0","type":"link"}