{"product_id":"evil-energy-3-8-transmission-cooler-hose-10ft-sae-j1532-250-psi-oil-and-abrasion-resistant","title":"EVIL ENERGY 3\/8\" Transmission Cooler Hose 10ft — SAE J1532, 250 PSI, oil- and abrasion-resistant","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 3\/8\" Transmission Cooler Hose is a 10-foot, SAE J1532-compliant line engineered to move transmission, engine, hydraulic and power steering fluids reliably at up to 250 PSI with robust NBR\/polyester\/CPE construction.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis transmission cooler hose is designed for demanding vehicle and equipment cooling circuits where reliable fluid transfer, flexibility and resistance to heat and pressure are essential. Built to SAE J1532 standards, the hose balances flexibility with reinforcement so it can be routed through tight engine bays while resisting abrasion, oil exposure and temperature swings from -40°F to 257°F. Whether used for aftermarket repairs, custom plumbing or routine maintenance, the EVIL ENERGY line aims to simplify installation and last longer under stress.\u003c\/p\u003e\n\n\u003ch3\u003eHow strong and heat-resistant is this 3\/8\" transmission hose?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose is rated for a working pressure of 250 PSI and a burst pressure of 1000 PSI, providing a wide safety margin for most automotive and hydraulic cooling applications. Its operating temperature span covers extremes that commonly occur around engines and coolers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 250 PSI, burst: 1000 PSI.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40°F to 257°F (-40°C to 125°C).\u003c\/li\u003e\n  \u003cli\u003eReinforced polyester fiber braid for pressure and fatigue resistance.\u003c\/li\u003e\n  \u003cli\u003eCPE outer cover resists abrasion, ozone and oil exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and routing limits I should know?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose inner diameter is 3\/8\" (9.5 mm) with tight manufacturing tolerances and an outer diameter near 0.63\" (16 mm). A 10-foot continuous length gives flexibility for routing, and the specified minimum bend radius helps prevent kinks when navigating tight spaces.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInner diameter (ID): 3\/8\" (9.5 mm), tolerance ±0.4 mm.\u003c\/li\u003e\n  \u003cli\u003eOuter diameter (OD): 0.63\" (16 mm), tolerance ±0.5 mm.\u003c\/li\u003e\n  \u003cli\u003eLength: 10 ft (3.05 m) continuous.\u003c\/li\u003e\n  \u003cli\u003eMinimum recommended bend radius: 5.03 in (128 mm).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and systems is this hose compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eEVIL ENERGY's transmission cooler hose is formulated to work with a variety of vehicle fluids commonly routed through coolers and remote reservoirs. Its internal NBR tube resists degradation from oil-based fluids while the construction meets SAE J1532 expectations for cooler line applications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSuitable for transmission fluid, engine oil and hydraulic oil.\u003c\/li\u003e\n  \u003cli\u003eCompatible with lubricants and power steering fluids.\u003c\/li\u003e\n  \u003cli\u003eMeets SAE J1532 standards for cooler line performance.\u003c\/li\u003e\n  \u003cli\u003eWorks with clamp sizes that fit 16–25 mm diameter hoses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and what mounting or clamp details matter?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose’s flexibility and 10-foot length make it straightforward to route and trim to fit most installations. Use proper hose clamps sized for the hose outer diameter, observe the recommended bend radius, and secure the line away from hot exhaust or sharp edges to prolong service life.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTrim to length with a clean square cut; avoid frayed ends.\u003c\/li\u003e\n  \u003cli\u003eRecommended clamp range: fits 16–25 mm diameter hoses.\u003c\/li\u003e\n  \u003cli\u003eMaintain the 5.03 in minimum bend radius to prevent collapse or kinking.\u003c\/li\u003e\n  \u003cli\u003eFasten away from moving parts and high-heat surfaces for durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? EVIL ENERGY’s 3\/8\" transmission cooler hose is intended for mechanics, DIY vehicle owners, restoration projects and performance shops that need a dependable replacement or custom routing hose for transmission, engine or hydraulic cooling circuits. It’s also suited to applications where SAE J1532 compatibility and an extended temperature range are required. If you need a long, flexible line able to handle oil-based fluids under pressure and in hot environments, this hose delivers the necessary mechanical properties and installation convenience.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for power steering fluid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The NBR inner tube and CPE cover are compatible with power steering fluids and meet SAE J1532 guidelines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut this 10ft hose to length?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Trim with a square cut, maintain the minimum bend radius, and use appropriate clamps for a secure fit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67587289579705,"sku":"B0FQ54RXGZ","price":87.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-front-packaging_ee9802b2-da28-4427-a38a-fe096ec30ce9.jpg?v=1790504520","url":"https:\/\/redleafauto.ca\/products\/evil-energy-3-8-transmission-cooler-hose-10ft-sae-j1532-250-psi-oil-and-abrasion-resistant","provider":"Redleaf Auto","version":"1.0","type":"link"}