{"product_id":"evil-energy-8an-nylon-braided-fuel-hose-10-ft-black-cpe-core-750-psi-working","title":"EVIL ENERGY 8AN Nylon-Braided Fuel Hose 10 ft Black — CPE Core, 750 PSI Working","description":"\u003cstrong\u003eEVIL ENERGY 8AN 10-foot CPE nylon-braided fuel hose is a high-pressure, temperature-resistant line built for fuel, oil, and coolant applications that require durable AN8 connections.\u003c\/strong\u003e\n\nThis 10-foot AN8-rated fuel hose combines a CPE rubber core, 304 stainless-steel wire reinforcement, and a nylon outer braid to deliver an abrasion-resistant, flexible line for vehicles and performance systems. Designed to handle demanding environments, it balances working pressure, thermal tolerance, and compatibility with common automotive fluids. The hose ships with installation guidance and is intended for use with 8AN swivel hose ends.\n\n\u003ch3\u003eWhat operating pressures and temperatures can this EVIL ENERGY hose tolerate?\u003c\/h3\u003e\n\u003cp\u003eThe 8AN braided hose is engineered to hold up under high loads without compromising safety. It has a maximum continuous working pressure of 750 PSI and a burst pressure rated at 2,250 PSI, suitable for many automotive and industrial fluid systems. Temperature performance spans from -22°F to 248°F, allowing use across cold starts and hot engine bay conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWorking pressure: 750 PSI\u003c\/li\u003e\n\u003cli\u003eBurst pressure: 2,250 PSI\u003c\/li\u003e\n\u003cli\u003eTemperature range: -22°F to 248°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and systems is the 8AN CPE hose compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis hose is formulated to accept a wide range of liquids used in road and race applications. It is compatible with gasoline (including race gas), diesel, oil, transmission fluid, hydraulic fluid, coolant, and vacuum lines. Use it wherever an AN8 connection and braided protection are required, but confirm compatibility with specialty chemicals before installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuel types: race gas, gasoline, diesel\u003c\/li\u003e\n\u003cli\u003eLubricants: engine oil, transmission fluid\u003c\/li\u003e\n\u003cli\u003eOther: hydraulic fluid, coolant, vacuum and turbo cooler lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does construction affect durability and installation?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses a CPE (chlorinated polyethylene) inner tube for fluid resistance, a 304 stainless-steel wire reinforcement layer for pressure and crush resistance, and a nylon outer braid for abrasion protection and neat routing. That combination yields a flexible line that resists swelling, kinking, and external wear. The hose ID is 0.41 inch and OD is 0.65 inch, fitting standard 8AN swivel hose ends and allowing tidy routing through tight engine bays.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInner core: CPE rubber for chemical resistance\u003c\/li\u003e\n\u003cli\u003eReinforcement: 304 stainless-steel wire for strength\u003c\/li\u003e\n\u003cli\u003eOuter braid: nylon for abrasion resistance and clean appearance\u003c\/li\u003e\n\u003cli\u003eDimensions: ID 0.41\", OD 0.65\", length 10 ft\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about sizing and pairing fittings?\u003c\/h3\u003e\n\u003cp\u003eThis 10-foot length lets you run longer lines or cut to exact lengths for custom setups; it is intended to be used with 8AN swivel hose ends only. Measure twice before cutting, and follow included installation instructions to ensure proper hose end seating and torque. For complex systems, consider pre-bending or routing mock-ups before final assembly to avoid strain at fittings.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 10 feet — trim to fit\u003c\/li\u003e\n\u003cli\u003eWorks with: 8AN swivel hose ends only\u003c\/li\u003e\n\u003cli\u003eIncludes installation instructions to guide proper fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\nThis EVIL ENERGY AN8 braided fuel line is for enthusiasts, mechanics, and fabricators who need a reliable, high-pressure hose for fuel, oil, coolant, or vacuum circuits. Ideal for race cars, street performance builds, custom installations, and replacement runs where AN8 compatibility, abrasion resistance, and wide temperature tolerance matter. If you need a flexible, serviceable 10-foot AN8 line with strong reinforcement and broad fluid compatibility, this hose is a practical choice.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for race fuel and diesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CPE inner tube and braided construction are compatible with race gas and diesel, but verify with your specific fuel blend before prolonged use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use my own AN8 fittings with this hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hose is designed to work with 8AN swivel hose ends; follow the included installation instructions for proper assembly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":67586883158201,"sku":"B07Z4Q67QH","price":98.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/evil-energy-an8-front-packaging.jpg?v=1790495688","url":"https:\/\/redleafauto.ca\/products\/evil-energy-8an-nylon-braided-fuel-hose-10-ft-black-cpe-core-750-psi-working","provider":"Redleaf Auto","version":"1.0","type":"link"}