{"product_id":"flycle-2-4x137-wheel-spacers-for-can-am-maverick-x3-2-thick-m12x1-5-studs-110mm-bore","title":"FLYCLE 2\" 4x137 Wheel Spacers for Can-Am Maverick X3 — 2\" Thick, M12x1.5 Studs, 110mm Bore","description":"\u003cp\u003e\u003cstrong\u003eFLYCLE 2\" 4x137 wheel spacers are a precision-machined adapter set that pushes your wheels outward to improve tire clearance and stance on 2017–2025 Can‑Am Maverick X3 and compatible UTVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese wheel spacers are engineered to fit vehicles using a 4x137 bolt pattern with M12x1.5 studs and a 110 mm hub bore. Machined from forged 6061‑T6 aluminum and supplied with hardened 12.9 grade hardware and threadlocker, the kit focuses on a secure, repeatable fit while resisting corrosion. Each kit contains four 2‑inch spacers along with installation aids so you can upgrade track width and accommodate wider tires or aftermarket wheels safely.\u003c\/p\u003e\n\n\u003ch3\u003eHow will these spacers change my Maverick X3’s handling and clearance?\u003c\/h3\u003e\n\u003cp\u003ePushing the wheels outward alters track width and can increase clearance between tires and suspension or brake components. That extra offset helps fit wider tires, reduces rubbing on larger tread, and can slightly change steering feel depending on tire and wheel setup. These spacers are not a suspension modification; they change wheel position only.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2\" (50.8 mm) thickness increases track width for improved tire clearance\u003c\/li\u003e\n  \u003cli\u003e110 mm hub bore centers the spacer for consistent wheel alignment\u003c\/li\u003e\n  \u003cli\u003eReduces brake- or control-arm interference with larger tires\u003c\/li\u003e\n  \u003cli\u003eCan provide a wider, more aggressive stance visually\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these spacers compatible with my vehicle and wheels?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses a 4x137 bolt pattern and M12x1.5 lug nuts, designed for 2017–2025 Can‑Am Maverick X3, plus several other UTV models like Talon 1000R\/1000X (2019–2025) and Pioneer 1000 (2016–2024). Compatibility also depends on your wheel’s center bore and stud configuration—measure your hub bore and stud pitch before ordering. The included hardware matches the thread pitch and is heat treated for strength.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 4x137 — matches specified Can‑Am and compatible UTVs\u003c\/li\u003e\n  \u003cli\u003eStud thread: M12x1.5 — ensure your wheels use the same lug specifications\u003c\/li\u003e\n  \u003cli\u003eHub bore: 110 mm — centers the spacer on the hub for fitment accuracy\u003c\/li\u003e\n  \u003cli\u003eIncludes threadlockers and instructions for proper installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and manufacturing steps ensure safety and durability?\u003c\/h3\u003e\n\u003cp\u003eFLYCLE spacers are forged from 6061‑T6 aluminum, a standard alloy for strength and corrosion resistance in off‑road components. CNC machining creates a precise mating surface to your hub for repeatable centering, and the supplied 12.9 grade screws are heat treated to resist shearing under load. Threadlocker is included to reduce the chance of fastener looseness during off‑road use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForged 6061‑T6 aluminum for strength and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eCNC machining for tight hub contact and consistent centering\u003c\/li\u003e\n  \u003cli\u003eGrade 12.9 hardened screws to minimize breakage and vibration\u003c\/li\u003e\n  \u003cli\u003eIncluded threadlockers to secure fasteners after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and torque these wheel spacers?\u003c\/h3\u003e\n\u003cp\u003eFollow the included instructions and torque the wheel hardware to the manufacturer’s recommendation. FLYCLE suggests tightening in stages—apply the recommended number of turns or torque spec, and re‑check after an initial short drive. Proper installation reduces the risk of uneven seating or fastener loosening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecommended torque guidance: approximately 8 turns equals 85–90 lb·ft as a reference\u003c\/li\u003e\n  \u003cli\u003eTighten in a crisscross pattern for even seating\u003c\/li\u003e\n  \u003cli\u003eUse supplied threadlocker on fasteners to help prevent loosening\u003c\/li\u003e\n  \u003cli\u003eRe‑inspect and re‑torque after the first few miles of driving\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These spacers are intended for off‑road enthusiasts and UTV owners who need extra tire clearance, want to fit wider tires or aftermarket wheels, or prefer a wider stance for aesthetics. They suit mechanically confident installers and professional shops alike; if you’re unsure about fitment or torque, consult a qualified technician to ensure safe installation on your specific vehicle and wheel combination.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these spacers fit my 2018 Can‑Am Maverick X3?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this kit fits 2017–2025 Maverick X3 models using a 4x137 bolt pattern and M12x1.5 studs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do the spacers come with the necessary hardware?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The package includes four spacers, two high‑strength threadlockers, and installation instructions; hardened screws are provided with the kit.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FLYCLE","offers":[{"title":"Default Title","offer_id":67585088684217,"sku":"B0F18RPQ6P","price":325.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/flycle-front-view-wheel-spacers-packaging.jpg?v=1790466874","url":"https:\/\/redleafauto.ca\/products\/flycle-2-4x137-wheel-spacers-for-can-am-maverick-x3-2-thick-m12x1-5-studs-110mm-bore","provider":"Redleaf Auto","version":"1.0","type":"link"}