{"product_id":"gzdlmoto-swing-arm-spools-for-cfmoto-675ss-m10x1-25-cnc-t6061-aluminum-anodized-pair","title":"GZDLMoto Swing Arm Spools for CFMOTO 675SS M10x1.25 — CNC T6061 Aluminum, Anodized Pair","description":"\u003cp\u003e\u003cstrong\u003eThese GZDLMoto swing arm spools are CNC-machined T6061 aluminum slider pins that protect the swingarm, act as stand lift points, and fit CFMOTO 675SS\/675SR\/675NK motorcycles with 10mm finer threads.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese spool-style swing arm sliders combine lightweight strength with corrosion-resistant anodizing to give your CFMOTO a purposeful protection point and an easy lift location for paddock stands. At 35mm diameter and 47mm tall with M10x1.25 threaded bolts, the pair installs quickly and provides both frame protection during falls and a safe, repeatable contact for maintenance stands. Each package includes two spools and the machined finish adds a visual upgrade to match your bike.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these spools protect my bike during a tip-over?\u003c\/h3\u003e\n\u003cp\u003eBy creating a sacrificial contact point, the spools take impact on cast or machined aluminum instead of painted swingarm surfaces or fragile fasteners. Their rounded profile helps dissipate sliding forces while the anodized finish resists abrasion and corrosion from road contact. They reduce the chance of deep gouges or costly paint and metal damage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e35mm diameter provides a wide contact surface to absorb abrasion.\u003c\/li\u003e\n  \u003cli\u003eCNC T6061 aluminum is tough yet lightweight to avoid adding excess mass.\u003c\/li\u003e\n  \u003cli\u003eAnodized surface reduces corrosion and maintains appearance after impacts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these spools support a rear paddock stand safely?\u003c\/h3\u003e\n\u003cp\u003eYes — the spools offer a secure, repeatable lift point for most rear paddock stands designed to engage swingarm bobbins. Their M10x1.25 finer-thread mounting ensures a tight connection to the swingarm, and the measured height gives sufficient clearance for standard stand hooks. Use a compatible stand and check torque before lifting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eM10x1.25 threaded bolts match common CFMOTO mounting points.\u003c\/li\u003e\n  \u003cli\u003e47mm height positions the spool for stable stand engagement.\u003c\/li\u003e\n  \u003cli\u003eSold in pairs to allow lifting and balancing both sides reliably.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what tools are needed?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and usually takes under five minutes with basic hand tools. Remove the stock bolt or bobbin, screw in the spool bolt to hand-tight and finish to recommended torque. No special modifications are required, and the kit is ready to use right away.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical installation time: under 5 minutes.\u003c\/li\u003e\n  \u003cli\u003eTools: common hex\/allen key or socket set, torque wrench recommended.\u003c\/li\u003e\n  \u003cli\u003eIncludes one pair of spools so both sides are protected immediately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAre these spools compatible with my CFMOTO model and what sizes should I check?\u003c\/h3\u003e\n\u003cp\u003eThese spools are designed for CFMOTO models with M10x1.25 swingarm mounting points, specifically 675SS, 675SR, 675SR-R and 675NK variants. Confirm your bike’s bobbin thread size and clearance before ordering; manual measurement may vary by 1–3mm. If your model uses a different thread pitch or mounting arrangement, select a spool designed for that specification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for: CFMOTO 675SS \/ 675SR \/ 675SR-R \/ 675NK.\u003c\/li\u003e\n  \u003cli\u003eThread spec: M10x1.25 finer thread.\u003c\/li\u003e\n  \u003cli\u003eDimensions: 35mm diameter, 47mm height — check swingarm clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Riders who maintain or store their CFMOTO 675 series bikes and want a durable, attractive swayarm protection and paddock-stand mounting solution. These spools suit track-day enthusiasts, DIY mechanics, and everyday riders who value simple, robust protection and a professional finish. If you need quick installation, corrosion-resistant material, and a matched pair that complements your bike’s styling, this set is built to deliver.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spools fit all CFMOTO 675 models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit CFMOTO 675SS, 675SR, 675SR-R and 675NK with M10x1.25 swingarm threads; confirm your bike’s thread pitch before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools are required for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Basic hand tools like an Allen key or socket and a torque wrench are sufficient; installation typically takes under five minutes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GZDLMoto","offers":[{"title":"Default Title","offer_id":67593788489913,"sku":"B0FLSZ786Y","price":56.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/gzdlmoto-spool-front-view.jpg?v=1790578782","url":"https:\/\/redleafauto.ca\/products\/gzdlmoto-swing-arm-spools-for-cfmoto-675ss-m10x1-25-cnc-t6061-aluminum-anodized-pair","provider":"Redleaf Auto","version":"1.0","type":"link"}