{"product_id":"haosline-panel-bonding-adhesive-200-ml-cartridge-2-component-epoxy-high-shear-strength-and-corrosion-resistant","title":"HAOSLINE Panel Bonding Adhesive 200 mL Cartridge — 2‑component epoxy, high shear strength and corrosion resistant","description":"\u003cp\u003e\u003cstrong\u003eHAOSLINE Panel Bonding Adhesive is a two-component 200 mL epoxy formulated to join non-structural auto body panels like quarter panels, door skins and roof skins with high shear strength and corrosion resistance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis adhesive cartridge provides a reliable, long-working-time solution for panel repair and replacement on cars, vans and light commercial vehicles. It cures at room temperature in predictable stages—90 minutes open time for fitment, clamp time around four hours, and full cure in about 24 hours at 77°F—while optional heat-curing at 176°F accelerates performance. The product is designed to bond a wide range of substrates used in automotive repair, including steel, aluminum, SMC, fiberglass and many plastics (not suited for PP, PE or POM).\u003c\/p\u003e\n\n\u003ch3\u003eHow do I prepare surfaces for a durable bond?\u003c\/h3\u003e\n\n\u003cp\u003eSurface preparation is the most important step for a lasting bond. Clean all mating surfaces of oil, paint contamination, rust and moisture; sand severely corroded areas back to solid metal and remove dust before applying adhesive.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWipe with a degreaser until surfaces are free from oil and contaminants.\u003c\/li\u003e\n  \u003cli\u003eSand through corrosion to sound metal; remove sanding dust and residues.\u003c\/li\u003e\n  \u003cli\u003eEnsure parts are dry and properly aligned before bonding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the correct mixing and application process?\u003c\/h3\u003e\n\n\u003cp\u003eThe HAOSLINE cartridge uses a 1:1 two-part system and must be equalized so both components flow evenly before attaching the static mixing nozzle. Discard the first ~5 grams to avoid unmixed material, then apply with a 200 mL 1:1 epoxy gun and join the panels while the adhesive is within its 90-minute working time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExtrude until both sides dispense equally, then attach the nozzle.\u003c\/li\u003e\n  \u003cli\u003eDiscard ~5 g of adhesive to ensure proper mixing; use within the open time.\u003c\/li\u003e\n  \u003cli\u003eApply an even bead, align panels, clamp and maintain pressure during initial cure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long until the bonded panels can be handled or painted?\u003c\/h3\u003e\n\n\u003cp\u003eWorking time allows for alignment and clamp set-up; the adhesive reaches initial handling strength in roughly four hours, while full mechanical strength develops in 24 hours at 77°F. Heat-curing at 176°F for three hours speeds the process and can improve coating compatibility.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorking time: 90 minutes at 77°F—time for alignment and adjustments.\u003c\/li\u003e\n  \u003cli\u003eClamp\/fixture time: about 4 hours to achieve handling strength.\u003c\/li\u003e\n  \u003cli\u003eFull cure: 24 hours at 77°F, or 3 hours at 176°F for accelerated cure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich materials will this adhesive bond, and which should be avoided?\u003c\/h3\u003e\n\n\u003cp\u003eHAOSLINE epoxy bonds many common auto-body materials including steel, aluminum, composites, fiberglass (FRP), SMC and a variety of rigid plastics. It is not recommended for low-surface-energy plastics such as polypropylene (PP), polyethylene (PE) or polyoxymethylene (POM) without specialized primers.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRecommended: steel, aluminum, SMC, FRP, polycarbonate, polystyrene and many composites.\u003c\/li\u003e\n  \u003cli\u003eAvoid without primer: PP, PE and POM—these require special surface treatment.\u003c\/li\u003e\n  \u003cli\u003eUse appropriate primers or mechanical fastening when bonding difficult substrates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Repair shops, restoration specialists, body technicians and experienced DIYers who work on non-structural vehicle panels will find this 200 mL HAOSLINE cartridge useful for precise, corrosion-resistant panel bonding. It suits projects where long working time and strong shear strength are required, and where controlled curing—either at room temperature or heat-accelerated—is desirable for scheduling and topcoat preparation. Note: requires a 1:1 ratio epoxy gun and adherence to mixing instructions for best results; not intended for load-bearing structural repairs or for use on certain low-energy plastics without primers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I paint over the adhesive after cure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. After full cure (24 hours at 77°F or heat-cured), the surface can be prepared and painted following standard automotive coating steps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this adhesive suitable for structural repairs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It is formulated for non-structural body panels like door skins and quarter panels, not for load-bearing structural repairs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HAOSLINE","offers":[{"title":"Default Title","offer_id":67589795283129,"sku":"B0H1B529P8","price":81.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/haosline-front-packaging-panel-adhesive.jpg?v=1790532051","url":"https:\/\/redleafauto.ca\/products\/haosline-panel-bonding-adhesive-200-ml-cartridge-2-component-epoxy-high-shear-strength-and-corrosion-resistant","provider":"Redleaf Auto","version":"1.0","type":"link"}