{"product_id":"ksp-performance-1-5in-wheel-spacers-for-toyota-tacoma-4runner-tundra-6x5-5-pcd-106mm-hub-bore","title":"KSP PERFORMANCE 1.5in Wheel Spacers for Toyota Tacoma 4Runner Tundra — 6x5.5 PCD, 106mm Hub Bore","description":"\u003cp\u003e\u003cstrong\u003eKSP PERFORMANCE 1.5-inch (38mm) wheel spacers adapt 6x5.5 bolt patterns to widen track and clear larger tires on compatible Toyota trucks and SUVs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese wheel spacers are engineered to move your wheels outward by 1.5 inches for an improved stance, additional clearance for wider tires or suspension components, and compatibility with lift or leveling setups. Constructed with heat-treated components and supplied with thread locker, the kit includes four spacers, hardened M12x1.5 studs, and a 106mm hub bore to match specified vehicle hubs. Before installing, check bolt length and vehicle model details to confirm fitment and safety.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my Tacoma, 4Runner, or Tundra?\u003c\/h3\u003e\n\n\u003cp\u003eThey are built to fit many Toyota models that use a 6x5.5 (6x139.7mm) bolt pattern and a 106mm hub bore. Verify your exact year and drivetrain, because some variants (locking-hub vehicles and certain 2WD\/trim levels) are not compatible. If original wheel studs or lug nuts are too short, you must use extended lug nuts for a safe installation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with many 1996–2023 4Runner and 2002–2015 Tacoma 4WD models (see compatibility list).\u003c\/li\u003e\n  \u003cli\u003eWorks with 2000–2006 Tundra, 2007–2021 FJ Cruiser, and various Land Cruiser and Lexus GX model years noted in the product listing.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for vehicles with locking hubs or mismatched hub bore measurements.\u003c\/li\u003e\n  \u003cli\u003eConfirm original bolt length; if under 27mm, swap to extended (ET) lug nuts before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will 1.5 inches of spacer thickness affect handling and clearance?\u003c\/h3\u003e\n\n\u003cp\u003eA 38mm spacer increases track width, giving a wider stance that can enhance perceived stability and allow for installation of larger tires or aftermarket suspension components. It also creates room between the wheel and suspension parts to prevent rubbing. Proper torque and correct stud engagement are essential to retain wheel security and predictable handling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSpacer thickness: 1.5 inches (38mm) to push wheel outward.\u003c\/li\u003e\n  \u003cli\u003eStud\/Nut Thread Pitch: M12x1.5 with heat-treated Grade 10.9 bolts for strength.\u003c\/li\u003e\n  \u003cli\u003eRecommended wheel torque: 72–80 ft\/lbs for secure fastening.\u003c\/li\u003e\n  \u003cli\u003eIncluded thread locker reduces fastener loosening from vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hardware and installation notes should I be aware of?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit ships with hardened studs and a thread locker to help secure the spacer to the hub and wheel assembly. You must ensure the original lug bolts or nuts have adequate thread engagement; if not, replace them with extended lug nuts. Follow the recommended torque values and recheck torque after initial driving to maintain safety.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eKit quantity: 4 spacers, hub bore: 106mm, studs: M12x1.5.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated 10.9 grade bolts resist breakage and stripping under load.\u003c\/li\u003e\n  \u003cli\u003eUse extended lug nuts when original bolt length is less than 27mm.\u003c\/li\u003e\n  \u003cli\u003eRe-torque wheels after installation and at regular intervals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan these spacers be used with lifts, leveling kits, or larger tires?\u003c\/h3\u003e\n\n\u003cp\u003eYes—adding 1.5 inches of offset often creates the extra clearance you need for bigger tires and aftermarket suspension parts, while improving the truck's stance. However, confirm wheel backspacing, tire size, and alignment settings to avoid rubbing and maintain safe steering geometry. Professional installation is recommended if you are unsure.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHelps clear larger traction tires and some lift\/leveling kit components.\u003c\/li\u003e\n  \u003cli\u003eMay affect alignment; check camber\/toe after installation.\u003c\/li\u003e\n  \u003cli\u003eNot a substitute for incorrect wheel sizing or improper suspension work.\u003c\/li\u003e\n  \u003cli\u003eProfessional fitment advice ensures optimal results and safety.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Drivers who own compatible Toyota trucks and SUVs and want a wider stance, increased tire clearance, or improved aesthetics will benefit from the KSP PERFORMANCE 1.5\" wheel spacers. The kit targets mechanically minded individuals and installers upgrading tires or suspension who will verify bolt length, hub bore, and vehicle-specific fitment before fitting. KSP SUPPORT offers a 30-day refund window and 12-month replacement parts to back the purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers fit locking hubs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These spacers are not compatible with vehicles that have locking hubs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What torque should I use for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Tighten wheel studs to the recommended 72–80 ft\/lbs and recheck after driving.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KSP PERFORMANCE","offers":[{"title":"Default Title","offer_id":67584983204025,"sku":"B07X8RC163","price":304.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ksp-performance-spacer-front-view_2077a3a1-cfcf-42fe-95ab-faee8d4d3af0.jpg?v=1790462116","url":"https:\/\/redleafauto.ca\/products\/ksp-performance-1-5in-wheel-spacers-for-toyota-tacoma-4runner-tundra-6x5-5-pcd-106mm-hub-bore","provider":"Redleaf Auto","version":"1.0","type":"link"}