{"product_id":"loktenwo-cnc-aluminum-atv-whip-light-mounts-2-pack-for-0-875-1-125-tubes-heavy-duty-360-adjustable","title":"LOKTENWO CNC Aluminum ATV Whip Light Mounts, 2-Pack for 0.875\"–1.125\" Tubes — Heavy-Duty, 360° Adjustable","description":"\u003cp\u003e\u003cstrong\u003eLOKTENWO 2PCS Heavy Duty CNC ATV Whip Light Mount is a rugged, adjustable clamp set designed to securely attach lights, flags, or antennas to 0.875\"–1.125\" round tubes with a 360° positioning range.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pair of CNC-machined aluminum mounts combines a reinforced design, rubber insert sizing, and a double-bolt hinge to hold accessories steady on ATVs, UTVs, golf carts, motorcycles, and other off-road rigs. Each clamp accepts standard device bases and offers snap-gear adjustment so you can point lights or flags exactly where you need them while resisting vibration and shock on rough terrain.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know these mounts will fit my roll cage or rack?\u003c\/h3\u003e\n\u003cp\u003eMeasure the outside diameter of your tube before ordering. The kit includes three different soft rubber ring inserts so the clamps can accommodate tubes with an inner clamp fit for 0.875\" (22mm), 1\" (25.4mm), and 1.125\" (28.6mm) sizes; one insert snaps into the clamp to eliminate slippage and absorb vibration.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes three non-slip rubber ring inserts for common tube diameters.\u003c\/li\u003e\n  \u003cli\u003eCheck tube OD against listed sizes for the correct clamp selection.\u003c\/li\u003e\n  \u003cli\u003eFits round rails on ATVs, UTVs, golf carts, motorcycles, and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the design heavy duty and reliable?\u003c\/h3\u003e\n\u003cp\u003eEach mount is CNC-machined from aluminum and finished with a Class III anodized surface that resists corrosion and abrasion. The clamp body is thickened and reinforced, while a double-bolt locking system and single-hinge layout provide a stable, secure connection that tolerates off-road stresses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced CNC aluminum body for improved strength and longevity.\u003c\/li\u003e\n  \u003cli\u003eClass III anodizing for corrosion and wear protection.\u003c\/li\u003e\n  \u003cli\u003eDouble-bolt lock and single-hinge for a tight, stable grip under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow adjustable is the mount and what can I attach to it?\u003c\/h3\u003e\n\u003cp\u003eThe mount features snap-gear indexing enabling 360° rotation, so you can lock the accessory at many angles for optimal beam direction or flag placement. The mounting hole diameter is 12.7 mm (0.5\"), compatible with most accessory base screws, making it easy to install whip lights, spotlights, antennas, or light bars.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSnap-gear design for quick, repeatable angle adjustments.\u003c\/li\u003e\n  \u003cli\u003e12.7 mm (0.5\") mounting hole matches common device screws.\u003c\/li\u003e\n  \u003cli\u003eCompatible with whip lights, flags, chase lights, antennas, and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and maintenance?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires basic hand tools: install the correct rubber insert, wrap the clamp around the tube, tighten the double bolts to secure, then attach your accessory using the 0.5\" hole. Periodically re-check bolt torque after heavy use and inspect rubber inserts for wear to maintain grip and vibration damping.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSimple clamp-on installation with standard wrenches.\u003c\/li\u003e\n  \u003cli\u003eRe-torque bolts after initial use and inspect inserts periodically.\u003c\/li\u003e\n  \u003cli\u003eEach mount weighs approximately 300 g (0.66 lbs), allowing robust hold without excessive added weight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Riders and builders who prioritize a dependable, adjustable mounting solution for off-road accessories will benefit most from these mounts. Whether you’re fitting LED light bars for night runs, adding whip flags for visibility, or mounting antennas and spotlights, LOKTENWO’s heavy-duty clamps suit enthusiasts, hunters, trail riders, utility vehicle owners, and custom builders seeking a secure, long-lasting attachment system that resists vibration and keeps gear pointed where it matters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tube sizes do these clamps fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit round tubes with inserts for 0.875\", 1.0\" and 1.125\" diameters; measure your tube OD before buying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I mount a heavy light bar or antenna with these?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—CNC aluminum, double-bolt locking, and a 12.7 mm mounting hole support most heavy-duty lights and antennas.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LOKTENWO","offers":[{"title":"Default Title","offer_id":67587447947449,"sku":"B0DWSJVPDC","price":96.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/loktenwo-front-view-clamp-mounted.jpg?v=1790508499","url":"https:\/\/redleafauto.ca\/products\/loktenwo-cnc-aluminum-atv-whip-light-mounts-2-pack-for-0-875-1-125-tubes-heavy-duty-360-adjustable","provider":"Redleaf Auto","version":"1.0","type":"link"}