{"product_id":"lwnwpper-2-5-inch-v-band-clamp-kit-with-male-female-flanges-304-stainless-weld-on","title":"LWNWPPER 2.5 inch V-Band Clamp Kit with Male \u0026 Female Flanges, 304 Stainless, Weld-On","description":"\u003cp\u003e\u003cstrong\u003eThe LWNWPPER 2.5 inch V-Band Clamp kit is a stainless-steel exhaust coupling that includes a 2.5\" male flange, a 2.5\" female flange, and a V-band clamp to create a sealed, removable join for 2.5\" OD pipes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit is built from 304 stainless steel for corrosion resistance and is designed to join 2.5\" outer-diameter pipes in exhaust, turbo, intercooler and ducting systems. It provides a reusable, strong connection that can be welded into pipe ends and then clamped for a tight seal that’s serviceable without cutting or re-welding. The set includes the male and female flanges sized for 2.5\" inner openings plus the V-band clamp and mounting hardware.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this V-band clamp kit fit my 2.5\" exhaust pipes?\u003c\/h3\u003e\n\u003cp\u003eThe male and female flanges have inner diameters sized to accept a 2.5\" OD pipe when welded to the pipe ends; the V-band clamp then gathers the two flanges to form the mechanical joint. Because the kit uses a V-shaped profile, it centers and compresses the flanges evenly for a reliable seal.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner flange diameter: 2.5\" to match 2.5\" OD tubing.\u003c\/li\u003e\n  \u003cli\u003eV-band clamp designed to wrap both flanges securely.\u003c\/li\u003e\n  \u003cli\u003eWeld-on installation for permanent flange attachment.\u003c\/li\u003e\n  \u003cli\u003eReusable clamp allows disassembly for service or modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability can I expect from the LWNWPPER set?\u003c\/h3\u003e\n\u003cp\u003eAll components are made from 304 stainless steel to resist rust and most corrosive environments common to vehicle exhaust and industrial ducting. The metal thickness and clamp hardware are intended for long-term mechanical reuse without significant deformation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e304 stainless construction resists corrosion and water exposure.\u003c\/li\u003e\n  \u003cli\u003eHeat-tolerant for exhaust and turbocharger applications.\u003c\/li\u003e\n  \u003cli\u003eRobust screw and nut fasteners for repeated cycles.\u003c\/li\u003e\n  \u003cli\u003eBuilt to withstand vibration and thermal expansion in typical systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install the male and female flanges and use the clamp?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for someone comfortable with basic welding and metal prep. You polish and prepare the pipe ends, weld each corresponding flange to its pipe, then position the flanges together and tighten the V-band clamp to complete the joint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStep 1: Polish and clean pipe incision edges for welding.\u003c\/li\u003e\n  \u003cli\u003eStep 2: Insert and weld male and female flanges at pipe ends.\u003c\/li\u003e\n  \u003cli\u003eStep 3: Place V-band clamp over flanges and torque screws evenly.\u003c\/li\u003e\n  \u003cli\u003eProvides a removable connection for maintenance without cutting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit work for turbo, muffler or intercooler plumbing?\u003c\/h3\u003e\n\u003cp\u003eThe kit is commonly used in exhaust and forced-induction plumbing where a serviceable, sealed connection is required. It suits turbo outlets, downpipes, muffler inlets, and intercooler or duct joints when the pipe OD matches 2.5\" and heat\/corrosion resistance is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with turbochargers, downpipes, and mufflers.\u003c\/li\u003e\n  \u003cli\u003eUseful for pumps, diesel engine exhausts, and air ducts.\u003c\/li\u003e\n  \u003cli\u003eIdeal where periodic disassembly is expected for tuning or repair.\u003c\/li\u003e\n  \u003cli\u003eNot intended as a clamp for non-matching tube sizes without adapters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The LWNWPPER 2.5 inch V-band Clamp with Male and Female Flanges is aimed at DIY mechanics, fabricators, and professional installers who need a durable, reusable coupling for 2.5\" OD pipes. Choose this kit if you require a stainless solution for exhaust, turbo plumbing, or ductwork that can be welded in place and unclamped for service or upgrades.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit 2.5\" OD tubing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the male and female flanges have 2.5\" inner diameters specifically to accept 2.5\" outer-diameter pipe when welded.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the kit rust resistant for exhaust use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — components are 304 stainless steel, chosen for corrosion resistance and suitability in exhaust and turbo environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LWNWPPER","offers":[{"title":"Default Title","offer_id":67595599839417,"sku":"B0DPYDTDPB","price":53.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/lwnwpper-front-packaging-v-band-2-5-inch.jpg?v=1790590597","url":"https:\/\/redleafauto.ca\/products\/lwnwpper-2-5-inch-v-band-clamp-kit-with-male-female-flanges-304-stainless-weld-on","provider":"Redleaf Auto","version":"1.0","type":"link"}