{"product_id":"ocpty-shock-struts-kit-for-chevy-blazer-1995-2005-front-rear-4-piece-tuned-damping","title":"OCPTY Shock Struts Kit for Chevy Blazer 1995-2005 — Front \u0026 Rear 4-Piece, Tuned Damping","description":"\u003cp\u003e\u003cstrong\u003eOCPTY front and rear shock struts 344040\/344041 are a complete 4-piece replacement set engineered to restore controlled, smoother ride and reliable damping for RWD Chevy Blazer (1995–2005) and compatible models.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your vehicle exhibits increased body roll, nose dive under braking, or a bouncy ride, worn shocks and struts are often the cause. This OCPTY kit includes four new shock absorbers designed to fit specified Chevy, GMC, and Isuzu models that use part numbers 344040 and 344041. The components arrive without springs, mounts, rubbers, or bushings, so check fitment and required hardware before installation.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these shocks and struts improve driving stability?\u003c\/h3\u003e\n\u003cp\u003eThese dampers control suspension movement to reduce oscillation after bumps and maintain consistent tire contact with the road. That means improved cornering confidence and shorter, more predictable braking behavior in everyday driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-strength welded joints reduce oil leakage and abnormal noise.\u003c\/li\u003e\n  \u003cli\u003ePrecisely tuned valving for consistent damping under load.\u003c\/li\u003e\n  \u003cli\u003eFront and rear coverage to balance handling across the axle set.\u003c\/li\u003e\n  \u003cli\u003eCompatible with original part numbers 344040 and 344041 for direct fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and years does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThe OCPTY set targets a range of GM and Isuzu trucks and SUVs that share the specified shock dimensions and mounting points. Always verify your exact Year\/Make\/Model\/Trim\/Engine selection on the product page before ordering to avoid incorrect purchases.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChevy Blazer: 1995–2005\u003c\/li\u003e\n  \u003cli\u003eChevy S10 \/ S10 Blazer and LLV variants: select years 1983–2005\u003c\/li\u003e\n  \u003cli\u003eGMC Jimmy, S15, S15 Jimmy, Sonoma: model years listed in compatibility details\u003c\/li\u003e\n  \u003cli\u003eIsuzu Hombre: 1996–2000 where applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and packaging?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard shock\/strut replacement steps and requires basic hand tools and vehicle support. Note that springs, mounts, and bushings are not included, so prepare necessary components if your original hardware is worn.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical steps: raise and secure vehicle, remove wheel, unbolt top and bottom fasteners, remove old shock, install new unit.\u003c\/li\u003e\n  \u003cli\u003eFour new shocks are shipped; to protect parts, they may arrive in two separate packages.\u003c\/li\u003e\n  \u003cli\u003eVerify torque specs and alignment after installation; replace worn mounting parts as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and quiet are these replacement units?\u003c\/h3\u003e\n\u003cp\u003eOCPTY uses reinforced welding at critical stamping joints to maintain a tight seal between barrel and components, minimizing oil leakage and reducing abnormal operational noise. The construction aims to deliver stable output and long-term performance under typical road conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced welded seams for reduced leakage risk.\u003c\/li\u003e\n  \u003cli\u003eDesigned to limit abnormal noise and deliver smoother damping.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish for extended service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This OCPTY 4-piece shock and strut kit is intended for owners and mechanics restoring ride quality and handling on compatible Chevy, GMC, and Isuzu trucks\/SUVs. It’s a practical replacement when your vehicle shows instability, excessive bounce, or poor braking feel, and for anyone who prefers an OEM-like direct-fit solution—remember to confirm vehicle fitment and source any missing mounts or springs before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these shocks include springs and mounts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The kit contains four shock struts only; springs, mounts, rubbers, and bushings are not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my Chevy Blazer 2000 RWD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, OCPTY 344040\/344041 are compatible with 1995–2005 Chevy Blazer RWD models; confirm trim and engine before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"OCPTY","offers":[{"title":"Default Title","offer_id":67586702475449,"sku":"B07M5WHN7R","price":185.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/ocpty-front-rear-shocks-package-front-view.jpg?v=1790490553","url":"https:\/\/redleafauto.ca\/products\/ocpty-shock-struts-kit-for-chevy-blazer-1995-2005-front-rear-4-piece-tuned-damping","provider":"Redleaf Auto","version":"1.0","type":"link"}