{"product_id":"pqy-24in-stainless-braided-throttle-cable-kit-universal-adjustable-accelerator-cable-aluminum-fittings","title":"PQY 24in Stainless Braided Throttle Cable Kit — Universal Adjustable Accelerator Cable, Aluminum Fittings","description":"\u003cp\u003e\u003cstrong\u003ePQY 24\" Universal stainless braided throttle cable kit is an adjustable, cut-to-fit accelerator cable assembly designed to replace worn plastic-sleeved throttle cables for cars, go-karts and custom projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis universal kit from PQY provides a durable stainless-steel inner wire with a braided outer housing and aluminum fittings, plus the necessary Allen wrench for installation. The assembly is supplied in a 24-inch length with a u-cut-to-fit inner cable so you can trim the inner wire to the exact routing and pedal geometry you need. It’s intended as a rugged, low-friction replacement for older or brittle plastic throttle sleeves and works with most factory and aftermarket pedals with minimal modification.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this cable fit my vehicle or build?\u003c\/h3\u003e\n\n\u003cp\u003eThe PQY 24\" kit is designed for broad compatibility: the outer housing accepts trimming and the inner stainless wire can be cut to match your required length and routing. While the outer braided housing must remain intact, the inner cable is U-cut-to-fit to achieve the precise travel and attachment points your throttle or pedal requires. Small adaptations to mounting points or clevises may be needed for some custom projects.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e24-inch preassembled length with inner cable ready to trim.\u003c\/li\u003e\n  \u003cli\u003eAluminum end fittings compatible with many factory and aftermarket pedals.\u003c\/li\u003e\n  \u003cli\u003eWorks for cars, go-karts, UTVs, and custom engine bays with minor adjustments.\u003c\/li\u003e\n  \u003cli\u003eSome projects may require adapter pins or bracket modifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the stainless braided construction better than a plastic sleeve?\u003c\/h3\u003e\n\n\u003cp\u003eThe stainless braided inner wire and aluminum ferrules reduce fraying and provide smoother, more consistent actuation compared with brittle plastic sleeves. The braided stainless material resists stretching and heat better than many polymers, which helps maintain throttle response and longevity in demanding conditions. Aluminum fittings prevent the cable ends from unraveling and simplify connection to pedals or throttle linkages.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStainless inner wire for strength and reduced stretch.\u003c\/li\u003e\n  \u003cli\u003eAluminum ferrules and fittings prevent fray and provide secure terminations.\u003c\/li\u003e\n  \u003cli\u003eBraided construction resists abrasion and heat in engine compartments.\u003c\/li\u003e\n  \u003cli\u003eSmoother pedal feel and more predictable throttle action.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is the kit to install and customize?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward: the cable uses common connector styles for easy attachment and requires no cotter pins or set screws. PQY includes an Allen wrench for tightening the fittings, and the inner wire is designed with a U-cut-to-fit approach so you can trim it to the correct travel length. Note that the braided outer housing should not be cut; only trim the inner cable where specified.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes one 24\" throttle cable and one Allen wrench for assembly.\u003c\/li\u003e\n  \u003cli\u003eConnector styles match many pedal and throttle linkages for quick hookup.\u003c\/li\u003e\n  \u003cli\u003eTrim only the inner wire; do not cut the braided outer housing.\u003c\/li\u003e\n  \u003cli\u003eNo cotter pins or set screws required for the typical installation.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before trimming or fitting the cable?\u003c\/h3\u003e\n\n\u003cp\u003eBefore cutting the inner cable, confirm full throttle and idle positions and measure travel to avoid making the cable too short. Verify the clearance along the routing path so the braided housing won’t rub on sharp edges, and inspect end fittings for compatibility with your pedal’s clevis or throttle arm. If necessary, acquire small adapters or replace a clevis pin to match your hardware.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMeasure required cable travel before trimming inner wire.\u003c\/li\u003e\n  \u003cli\u003eEnsure braided housing routing avoids sharp edges and hot surfaces.\u003c\/li\u003e\n  \u003cli\u003eConfirm fitting styles match pedal clevis or throttle arm dimensions.\u003c\/li\u003e\n  \u003cli\u003eKeep spare small pins or adapters on hand for custom setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This PQY stainless braided throttle cable kit is aimed at do-it-yourself mechanics, builders of go-karts or kit cars, and anyone replacing failing plastic sleeve throttle cables with a more durable option. It’s ideal when you need an adjustable, cut-to-fit cable with stronger materials and simple installation—perfect for hobbyists and professional tuners who want reliable throttle actuation without a custom-made cable.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut the braided outer housing to shorten the cable?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Only the inner stainless wire is U-cut-to-fit. The braided outer housing must remain intact for protection and strength.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include everything needed to install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It includes the 24\" throttle cable and an Allen wrench. Additional pins or adapters may be required for some pedal or linkage types.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PQY","offers":[{"title":"Default Title","offer_id":67592652095673,"sku":"B09BTV35VV","price":56.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/pqy-front-packaging-24inch-throttle-cable.jpg?v=1790566817","url":"https:\/\/redleafauto.ca\/products\/pqy-24in-stainless-braided-throttle-cable-kit-universal-adjustable-accelerator-cable-aluminum-fittings","provider":"Redleaf Auto","version":"1.0","type":"link"}