{"product_id":"richeer-1-5-front-leveling-kit-for-2004-2026-f-150-2wd-4wd-cnc-6061-t6-aluminum-12-9-studs","title":"Richeer 1.5\" Front Leveling Kit for 2004–2026 F-150 (2WD\/4WD) – CNC 6061-T6 Aluminum, 12.9 Studs","description":"\u003cp\u003e\u003cstrong\u003eRicheer’s 1.5 inch front leveling kit is a CNC-forged 6061-T6 aluminum spacer set engineered to raise compatible F-150 trucks and select Ford SUVs approximately 1.5 inches up front for improved clearance and a more aggressive stance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis leveling kit is designed specifically for Ford trucks and compatible SUVs from 2003–2026, allowing owners to gain additional front ground clearance without disassembling struts or coils. The kit uses precision-machined components and high-grade, heat-treated studs to provide reliable fitment and straightforward installation. It’s intended for drivers who want to fit larger tires, reduce front rake, or simply enhance the vehicle’s presence while maintaining safe, repeatable mounting points.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit affect my truck’s ride height and appearance?\u003c\/h3\u003e\n\u003cp\u003eInstalling the Richeer 1.5\" front levelers will raise the vehicle’s front ride height by roughly 1.5 inches, delivering a more balanced profile and improved obstacle clearance. Because suspension geometry varies, the measured lift at the wheel may differ slightly from spacer thickness, but the visual and practical change is immediately noticeable.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRaises the front approximately 1.5 inches for a level look.\u003c\/li\u003e\n  \u003cli\u003eAllows installation of larger rim and tire combinations.\u003c\/li\u003e\n  \u003cli\u003eGives a more aggressive, off-road-ready appearance.\u003c\/li\u003e\n  \u003cli\u003eImproves clearance for mild off-road obstacles and larger wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich vehicles are compatible and how precise is the fit?\u003c\/h3\u003e\n\u003cp\u003eThe kit is compatible with 2004–2026 Ford F-150 models (both 2WD and 4WD), and also fits certain Ford SUVs and trucks such as 2003–2018 Expeditions and 2005–2008 Mark LT models. Richeer employs CNC machining with a 0.02mm tolerance to ensure accurate hole locations and repeatable alignment with factory mounting points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect fit for 2004–2026 F-150 (2WD \u0026amp; 4WD).\u003c\/li\u003e\n  \u003cli\u003eCompatible with 2003–2018 Expedition and 2005–2008 Mark LT.\u003c\/li\u003e\n  \u003cli\u003eCNC-machined holes for consistent, reliable fitment.\u003c\/li\u003e\n  \u003cli\u003ePre-drilled and prepped to minimize installation variability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hardware come with the kit, and how durable is it?\u003c\/h3\u003e\n\u003cp\u003eThe spacers are forged from 6061-T6 aluminum, a lightweight but strong aerospace-grade alloy chosen for corrosion resistance and longevity. Richeer installs heat-treated 12.9 grade studs, delivering high tensile strength for secure clamping and long-term durability under load.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 forged aluminum construction for strength and low weight.\u003c\/li\u003e\n  \u003cli\u003eHeat-treated 12.9 grade studs pre-installed for safety and durability.\u003c\/li\u003e\n  \u003cli\u003ePrecision CNC processing with tight tolerances for stability.\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant finish to maintain appearance and fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I expect?\u003c\/h3\u003e\n\u003cp\u003eRicheer designed the kit for relatively quick installation—most users complete the job in 1–2 hours using common hand tools. No cutting, drilling, or disassembly of struts and coils is required, so the process is simpler than many suspension lift options. Still, standard safety practices and a torque wrench are recommended to ensure proper fastener tightening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical install time: 1–2 hours for a competent DIYer.\u003c\/li\u003e\n  \u003cli\u003eNo cutting, drilling, or strut\/coil removal necessary.\u003c\/li\u003e\n  \u003cli\u003eComes with pre-installed studs to speed assembly.\u003c\/li\u003e\n  \u003cli\u003eUse proper torque specs and alignment check after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Richeer 1.5\" Front Leveling Kit is aimed at F-150 and compatible Ford SUV owners who want a clean, factory-friendly method to lift the front end for larger tires, improved clearance, and a stronger visual stance. It suits DIY installers and professional shops looking for a CNC-precision aluminum spacer that balances strength, weight savings, and a straightforward installation without major suspension modification. If you seek a modest lift to change appearance and accommodate bigger wheels while retaining OEM-type mounting, this kit is a practical option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this kit fit my 2017 F-150 4WD?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The Richeer 1.5\" leveling kit is compatible with 2004–2026 F-150 models, including 2017 4WD trims.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to replace struts or coils to install it?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. Installation does not require strut or coil disassembly, cutting, or drilling; it uses factory mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Richeer","offers":[{"title":"Default Title","offer_id":67587295510713,"sku":"B089SF6PX2","price":113.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/richeer-front-kit-packaging_cc79ac08-deb5-4799-b47e-4ca238d1a01a.jpg?v=1790504774","url":"https:\/\/redleafauto.ca\/products\/richeer-1-5-front-leveling-kit-for-2004-2026-f-150-2wd-4wd-cnc-6061-t6-aluminum-12-9-studs","provider":"Redleaf Auto","version":"1.0","type":"link"}