{"product_id":"saree-3500-lb-5x4-5-5-bolt-trailer-hub-kit-2-set-complete-assemblies-for-tapered-spindles-coated-bearing-ready","title":"Saree 3500 lb 5x4.5\" 5-Bolt Trailer Hub Kit — 2-Set Complete Assemblies for Tapered Spindles, Coated \u0026 Bearing-Ready","description":"\u003cp\u003e\u003cstrong\u003eSaree 3500lb 5-bolt (5×4.5\") trailer hub kit supplies two fully equipped, rust-resistant hub assemblies engineered for 1-1\/16\" to 1-3\/8\" tapered spindles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eReplace worn hubs with this complete two-set kit from Saree built to match common 3,500 lb axle applications. Each set is manufactured to a high U.S. industrial standard using gray cast iron, factory-coated finishes and precision bearings so you receive a ready-to-install assembly. The kit bundles all mounting and sealing parts — from bearings and grease seals to lug nuts and dust caps — eliminating trips to the parts store and reducing installation time.\u003c\/p\u003e\n\n\u003ch3\u003eWill this hub kit fit my trailer axle?\u003c\/h3\u003e\n\u003cp\u003eThis 5×4.5\" hub kit is designed specifically for tapered spindles with 1-1\/16\" outer cone bearings (L44649) and 1-3\/8\" inner cone bearings (L68149). It is compatible with many popular 3,500 lb axle brands that use tapered spindle designs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 5×4.5\" bolt pattern, 5-lug wheels.\u003c\/li\u003e\n  \u003cli\u003eDesigned for L44649 (outer) and L68149 (inner) bearings.\u003c\/li\u003e\n  \u003cli\u003eWorks with tapered spindles — not for straight spindles.\u003c\/li\u003e\n  \u003cli\u003eCompatible with Dexter, Al-Ko, Lippert-style 3,500 lb axle models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat components and hardware are included in the two-set package?\u003c\/h3\u003e\n\u003cp\u003eEach purchase contains two complete hub assemblies and the full complement of installation hardware so you can service both sides of an axle or a tandem-axle trailer. Parts are sized to standard trailer specifications to simplify replacement work.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e2 hub assemblies (5×4.5\" bolt pattern) — two-piece packaging inside outer box.\u003c\/li\u003e\n  \u003cli\u003e2 L44649 outer bearings and 2 L68149 inner bearings.\u003c\/li\u003e\n  \u003cli\u003e10 lug nuts (1\/2\"-20), 4 galvanized dust caps, 2 grease seals (OD 2.56\", ID 1.72\").\u003c\/li\u003e\n  \u003cli\u003e2 castle nuts, 2 washers (ID 1\"), 2 cotter pins and installation hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the kit resist corrosion and wear over time?\u003c\/h3\u003e\n\u003cp\u003eSaree applies a protective finish and tests components to resist rust and surface damage, giving longer usable life in road and coastal environments. Critical wear parts are heat-treated and selected for strength to reduce breakage and friction-related failures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack coated hub bodies with 96-hour salt spray resistance testing.\u003c\/li\u003e\n  \u003cli\u003eGalvanized dust caps for improved corrosion protection and wear resistance.\u003c\/li\u003e\n  \u003cli\u003eHardened lug nuts rated to a 10.9 specification to reduce fracture risk.\u003c\/li\u003e\n  \u003cli\u003eHigh-quality bearings to lower noise and reduce friction on the spindle.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is installation, and what should I check after fitting?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard hub-and-bearing replacement steps; the kit contains all required parts to complete the job. After installation, torque lug nuts correctly, set proper bearing pre-load, and inspect seals and dust caps for a tight fit to prevent leakage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes castle nuts, washers, and cotter pins for secure spindle retention.\u003c\/li\u003e\n  \u003cli\u003eGrease seals and dust caps included to protect bearings from contaminants.\u003c\/li\u003e\n  \u003cli\u003eTorque lug nuts to vehicle\/wheel manufacturer spec and recheck after initial miles.\u003c\/li\u003e\n  \u003cli\u003eVerify tapered spindle fit — do not attempt on straight spindles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This Saree two-set hub kit is intended for trailer owners, DIY mechanics and fleet operators who need a reliable, cost-effective replacement for 3,500 lb tapered-spindle axles. It suits boat trailers, utility trailers, campers and small equipment trailers that use a 5×4.5\" bolt pattern and L44649\/L68149 bearings. If you want a boxed, ready-to-install solution with corrosion-resistant finishes and hardened mounting hardware, this kit provides a practical, all-in-one option. If your trailer uses a straight spindle or a different bearing specification, verify spindle and bearing dimensions before purchase.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hub kit fit straight spindles?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This kit is made for tapered spindles only (1-1\/16\" outer and 1-3\/8\" inner bearings).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are all installation parts included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit includes hubs, bearings, grease seals, dust caps, lug nuts, castle nuts, washers and cotter pins.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Saree","offers":[{"title":"Default Title","offer_id":67586488172729,"sku":"B0D4545Q6H","price":190.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/3765\/3177\/files\/saree-hubkit-front-view_f5757a14-f129-46e9-b684-dd35e657cb86.jpg?v=1790484592","url":"https:\/\/redleafauto.ca\/products\/saree-3500-lb-5x4-5-5-bolt-trailer-hub-kit-2-set-complete-assemblies-for-tapered-spindles-coated-bearing-ready","provider":"Redleaf Auto","version":"1.0","type":"link"}